Update History.md

Update GUIThread.cpp

.flake8

@@ -0,0 +1,3 @@
+[flake8]
+ignore = E203, E266, E501, W503, F403, F401
+max-line-length = 200

.gitattributes

@@ -0,0 +1,2 @@
+# Ignore all differences in line endings
+*        -crlf

.github/FUNDING.yml

@@ -0,0 +1,4 @@
+# These are supported funding model platforms
+
+ko_fi: ralim
+custom: https://paypal.me/RalimTek

.github/ISSUE_TEMPLATE/bug_report.md

@@ -0,0 +1,32 @@
+---
+name: Bug report
+about: Create a report to help us improve
+title: ''
+labels: ''
+assignees: Ralim
+
+---
+
+**Describe the bug**
+<!-- A clear and concise description of what the bug is. -->
+
+**To Reproduce**
+<!-- Steps to reproduce the behavior:
+1. Go to '...'
+2. Click on '....'
+3. Scroll down to '....'
+4. See error -->
+
+**Expected behavior**
+<!-- A clear and concise description of what you expected to happen. -->
+
+
+**Details on your device:**
+ <!-- You can get these from the  debug menu by holding the rear button down and then using the front one to cycle through-->
+ - Device: [e.g. TS80/Pinecil etc]
+ - Release: [eg 2.15.40087E6]
+ - Power adapter being used:
+ - If this is an acceleromter related issue, please include its model number here:
+
+**Additional context**
+<!-- Add any other context about the problem here. -->

.github/ISSUE_TEMPLATE/everything-else--questions--notes-etc-.md

@@ -0,0 +1,10 @@
+---
+name: Everything else (Questions, notes etc)
+about: For remarking questions or notes
+title: ''
+labels: ''
+assignees: ''
+
+---
+
+<!-- **Questions are preferred to be kept to the discussions tab where possible, but otherwise go for it. be polite and as clear as possible.** -->

.github/ISSUE_TEMPLATE/feature_request.md

@@ -0,0 +1,20 @@
+---
+name: Feature request
+about: Suggest an idea for this project
+title: ''
+labels: enhancement
+assignees: Ralim
+
+---
+
+**Is your feature request related to a problem? Please describe.**
+<!-- A clear and concise description of what the problem is. Ex. I'm always frustrated when [...] -->
+
+**Describe the solution you'd like**
+<!-- A clear and concise description of what you want to happen. -->
+
+**Describe alternatives you've considered**
+<!-- A clear and concise description of any alternative solutions or features you've considered. -->
+
+**Additional context**
+<!-- Add any other context or screenshots about the feature request here. -->

.github/dependabot.yml

@@ -0,0 +1,11 @@
+version: 2
+updates:
+  - package-ecosystem: "github-actions"
+    directory: "/"
+    schedule:
+      # Check for updates to GitHub Actions every weekday
+      interval: "weekly"
+    open-pull-requests-limit: 10
+    commit-message:
+      prefix: chore
+      include: scope

.github/workflows/push.yml

@@ -0,0 +1,144 @@
+name: CI
+
+on: [push, pull_request]
+
+jobs:
+  build:
+    runs-on: ubuntu-20.04
+    strategy:
+      matrix:
+        model: ["TS100", "TS80", "TS80P", "Pinecil", "MHP30"]
+      fail-fast: true
+
+    steps:
+      - uses: actions/checkout@v2
+
+      - name: chmod
+        run: chmod +x setup.sh && chmod +x source/build.sh && sudo mkdir -p /build/cache && sudo chmod -R 777 /build
+
+      - name: Cached compiler source files
+        uses: actions/cache@v2.1.6
+        env:
+          cache-name: cache-compilers
+        with:
+          path: /build/cache
+          key: ${{ runner.os }}-build-${{ env.cache-name }}
+          restore-keys: |
+            ${{ runner.os }}-
+
+      - name: setup
+        run: ./setup.sh
+
+      - name: build ${{ matrix.model }}
+        run: cd source && ./build.sh -m ${{ matrix.model }}
+
+      - name: copy license text
+        run: |
+          cp LICENSE source/Hexfile/LICENSE
+          cp LICENSE_RELEASE.md source/Hexfile/LICENSE_RELEASE.md
+
+      - name: Archive ${{ matrix.model }} artifacts
+        uses: actions/upload-artifact@v2
+        with:
+          name: ${{ matrix.model }}
+          path: |
+            source/Hexfile/${{ matrix.model }}_*.hex
+            source/Hexfile/${{ matrix.model }}_*.dfu
+            source/Hexfile/LICENSE
+            source/Hexfile/LICENSE_RELEASE.md
+          if-no-files-found: error
+
+  build_multi-lang:
+    runs-on: ubuntu-20.04
+    strategy:
+      matrix:
+        model: ["Pinecil"]
+      fail-fast: true
+
+    steps:
+      - uses: actions/checkout@v2
+
+      - name: chmod
+        run: chmod +x setup.sh && chmod +x source/build.sh && sudo mkdir -p /build/cache && sudo chmod -R 777 /build
+
+      - name: Cached compiler source files
+        uses: actions/cache@v2.1.6
+        env:
+          cache-name: cache-compilers
+        with:
+          path: /build/cache
+          key: ${{ runner.os }}-build-${{ env.cache-name }}
+          restore-keys: |
+            ${{ runner.os }}-
+
+      - name: setup
+        run: ./setup.sh
+
+      - name: build ${{ matrix.model }}
+        run: cd source && make -j$(nproc) model="${{ matrix.model }}" firmware-multi_compressed_European firmware-multi_compressed_Bulgarian+Russian+Serbian+Ukrainian firmware-multi_Chinese+Japanese
+
+      - name: copy license text
+        run: |
+          cp LICENSE source/Hexfile/LICENSE
+          cp LICENSE_RELEASE.md source/Hexfile/LICENSE_RELEASE.md
+
+      - name: Archive ${{ matrix.model }} artifacts
+        uses: actions/upload-artifact@v2
+        with:
+          name: ${{ matrix.model }}_multi-lang
+          path: |
+            source/Hexfile/${{ matrix.model }}_*.hex
+            source/Hexfile/${{ matrix.model }}_*.dfu
+            source/Hexfile/LICENSE
+            source/Hexfile/LICENSE_RELEASE.md
+          if-no-files-found: error
+
+  tests:
+    runs-on: ubuntu-20.04
+    steps:
+      - uses: actions/checkout@v2
+
+      - name: Setup
+        run: sudo apt-get update && sudo apt-get install -y python3 && pip3 install bdflib
+
+      - name: Run python tests
+        run: cd Translations && chmod +x make_translation_test.py && ./make_translation_test.py
+
+      - name: Run BriefLZ tests
+        run: |
+          cd source
+          make Objects/host/brieflz/libbrieflz.so
+          cd ../Translations
+          chmod +x brieflz_test.py
+          ./brieflz_test.py
+
+  check_formatting:
+    runs-on: ubuntu-20.04
+
+    steps:
+      - uses: actions/checkout@v2
+
+      - name: chmod
+        run: chmod +x setup.sh && chmod +x source/build.sh && sudo mkdir -p /build/cache && sudo chmod -R 777 /build
+
+      - name: Cached compiler source files
+        uses: actions/cache@v2.1.6
+        env:
+          cache-name: cache-compilers
+        with:
+          # we deliberately persist a cache folder forwards
+          path: /build/cache
+          key: ${{ runner.os }}-build-${{ env.cache-name }}
+          restore-keys: |
+            ${{ runner.os }}-
+
+      - name: setup
+        run: ./setup.sh
+      - name: Check formatting with clang-format
+        run: cd source && make clean && make check-style
+
+      - name: Check python formatting with black
+        run: black --check Translations
+
+      - name: Check python with flake8
+        run: flake8 Translations

.gitignore

@@ -1,44 +1,178 @@
-# Object files
-*.o
-*.ko
-*.obj
-*.elf
-*.d
-*.DS_Store
-# Precompiled Headers
-*.gch
-*.pch
-
-# Libraries
-*.lib
-*.a
-*.la
-*.lo
-
-# Shared objects (inc. Windows DLLs)
-*.dll
-*.so
-*.so.*
-*.dylib
-
-# Executables
-*.exe
-*.out
-*.app
-*.i*86
-*.x86_64
-workspace/*.hex
-
-# Debug files
-*.dSYM/
-*.su
-workspace/ts100/Debug/*
-workspace/.metadata/*
-
-workspace/ts100/.settings/language.settings.xml
-workspace/ts100/.cproject
-TS100/KiCad/TS100.bak
-Logo GUI/TS100 Logo Editor/TS100 Logo Editor/obj/
-Logo GUI/TS100 Logo Editor/TS100 Logo Editor/bin/
-workspace/ts100/ts100.xml
-workspace/ts100_old/*
+# Object files
+*.o
+*.ko
+*.obj
+*.elf
+*.d
+*.DS_Store
+# Precompiled Headers
+*.gch
+*.pch
+
+# Libraries
+*.lib
+*.a
+*.la
+*.lo
+
+# Shared objects (inc. Windows DLLs)
+*.dll
+*.so
+*.so.*
+*.dylib
+
+# Executables
+*.exe
+*.out
+*.app
+*.i*86
+*.x86_64
+
+# Debug files
+*.dSYM/
+*.su
+source/.metadata/*
+
+TS100/KiCad/TS100.bak
+Logo GUI/TS100 Logo Editor/TS100 Logo Editor/obj/
+Logo GUI/TS100 Logo Editor/TS100 Logo Editor/bin/
+*.cache
+Translation Editor/.vscode/
+Translation Editor/__pycache__/
+*.pyc
+*.lst
+*.mk
+*.list
+source/Hexfile/
+source/Objects/
+
+ci/artefacts/
+ci/secrets/unencrypted/
+codeship.aes
+.vscode/settings.json
+
+# Auto generated files
+source/Core/Inc/unit.h
+source/Core/Gen/
+# IDE configs
+.vs/*
+.settings/*
+..cproject.swp
+
+# Visual Studios
+.vscode/*
+!.vscode/settings.json
+!.vscode/tasks.json
+!.vscode/launch.json
+!.vscode/extensions.json
+
+# Eclipse
+.metadata
+bin/
+tmp/
+*.tmp
+*.bak
+*.swp
+*~.nib
+local.properties
+.settings/
+.loadpath
+.recommenders
+
+# External tool builders
+.externalToolBuilders/
+
+# Locally stored "Eclipse launch configurations"
+*.launch
+
+# PyDev specific (Python IDE for Eclipse)
+*.pydevproject
+
+# CDT- autotools
+.autotools
+
+# Java annotation processor (APT)
+.factorypath
+
+# PDT-specific (PHP Development Tools)
+.buildpath
+
+# sbteclipse plugin
+.target
+
+# Tern plugin
+.tern-project
+
+# TeXlipse plugin
+.texlipse
+
+# STS (Spring Tool Suite)
+.springBeans
+
+# Code Recommenders
+.recommenders/
+
+# Annotation Processing
+.apt_generated/
+
+# Scala IDE specific (Scala & Java development for Eclipse)
+.cache-main
+.scala_dependencies
+.worksheet
+
+# Jetbrains
+# Covers JetBrains IDEs: IntelliJ, RubyMine, PhpStorm, AppCode, PyCharm, CLion, Android Studio and WebStorm
+# Reference: https://intellij-support.jetbrains.com/hc/en-us/articles/206544839
+
+# User-specific stuff
+.idea/**/workspace.xml
+.idea/**/tasks.xml
+.idea/**/usage.statistics.xml
+.idea/**/dictionaries
+.idea/**/shelf
+
+# Sensitive or high-churn files
+.idea/**/dataSources/
+.idea/**/dataSources.ids
+.idea/**/dataSources.local.xml
+.idea/**/sqlDataSources.xml
+.idea/**/dynamic.xml
+.idea/**/uiDesigner.xml
+.idea/**/dbnavigator.xml
+
+# Gradle
+.idea/**/gradle.xml
+.idea/**/libraries
+
+# CMake
+cmake-build-*/
+
+# Mongo Explorer plugin
+.idea/**/mongoSettings.xml
+
+# File-based project format
+*.iws
+
+# IntelliJ
+out/
+
+# mpeltonen/sbt-idea plugin
+.idea_modules/
+
+# JIRA plugin
+atlassian-ide-plugin.xml
+
+# Cursive Clojure plugin
+.idea/replstate.xml
+
+# Crashlytics plugin (for Android Studio and IntelliJ)
+com_crashlytics_export_strings.xml
+crashlytics.properties
+crashlytics-build.properties
+fabric.properties
+
+# Editor-based Rest Client
+.idea/httpRequests
+
+CoreCompileInputs.cache
+.vscode/settings.json

Bootup Logo/Logo GUI/TS100 Logo Editor/TS100 Logo Editor.sln

@@ -1,22 +0,0 @@
-
-Microsoft Visual Studio Solution File, Format Version 12.00
-# Visual Studio 15
-VisualStudioVersion = 15.0.26430.15
-MinimumVisualStudioVersion = 10.0.40219.1
-Project("{FAE04EC0-301F-11D3-BF4B-00C04F79EFBC}") = "TS100 Logo Editor", "TS100 Logo Editor\TS100 Logo Editor.csproj", "{206C8AEF-3BE6-44E9-A1B0-25BF3805F1CB}"
-EndProject
-Global
-	GlobalSection(SolutionConfigurationPlatforms) = preSolution
-		Debug|Any CPU = Debug|Any CPU
-		Release|Any CPU = Release|Any CPU
-	EndGlobalSection
-	GlobalSection(ProjectConfigurationPlatforms) = postSolution
-		{206C8AEF-3BE6-44E9-A1B0-25BF3805F1CB}.Debug|Any CPU.ActiveCfg = Debug|Any CPU
-		{206C8AEF-3BE6-44E9-A1B0-25BF3805F1CB}.Debug|Any CPU.Build.0 = Debug|Any CPU
-		{206C8AEF-3BE6-44E9-A1B0-25BF3805F1CB}.Release|Any CPU.ActiveCfg = Release|Any CPU
-		{206C8AEF-3BE6-44E9-A1B0-25BF3805F1CB}.Release|Any CPU.Build.0 = Release|Any CPU
-	EndGlobalSection
-	GlobalSection(SolutionProperties) = preSolution
-		HideSolutionNode = FALSE
-	EndGlobalSection
-EndGlobal

Bootup Logo/Logo GUI/TS100 Logo Editor/TS100 Logo Editor.userprefs

@@ -1,8 +0,0 @@
-<Properties StartupItem="TS100 Logo Editor/TS100 Logo Editor.csproj">
-  <MonoDevelop.Ide.Workspace ActiveConfiguration="Debug" />
-  <MonoDevelop.Ide.Workbench />
-  <MonoDevelop.Ide.DebuggingService.Breakpoints>
-    <BreakpointStore />
-  </MonoDevelop.Ide.DebuggingService.Breakpoints>
-  <MonoDevelop.Ide.DebuggingService.PinnedWatches />
-</Properties>

Bootup Logo/Logo GUI/TS100 Logo Editor/TS100 Logo Editor/App.config

@@ -1,6 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<configuration>
-    <startup> 
-        <supportedRuntime version="v4.0" sku=".NETFramework,Version=v4.0"/>
-    </startup>
-</configuration>

Bootup Logo/Logo GUI/TS100 Logo Editor/TS100 Logo Editor/Form1.Designer.cs

@@ -1,209 +0,0 @@
-namespace TS100_Logo_Editor
-{
-    partial class Form1
-    {
-        /// <summary>
-        /// Required designer variable.
-        /// </summary>
-        private System.ComponentModel.IContainer components = null;
-
-        /// <summary>
-        /// Clean up any resources being used.
-        /// </summary>
-        /// <param name="disposing">true if managed resources should be disposed; otherwise, false.</param>
-        protected override void Dispose(bool disposing)
-        {
-            if (disposing && (components != null))
-            {
-                components.Dispose();
-            }
-            base.Dispose(disposing);
-        }
-
-        #region Windows Form Designer generated code
-
-        /// <summary>
-        /// Required method for Designer support - do not modify
-        /// the contents of this method with the code editor.
-        /// </summary>
-        private void InitializeComponent()
-        {
-            this.groupBox1 = new System.Windows.Forms.GroupBox();
-            this.btnLoadImage = new System.Windows.Forms.Button();
-            this.groupBox2 = new System.Windows.Forms.GroupBox();
-            this.cbInvertImage = new System.Windows.Forms.CheckBox();
-            this.gbScaling = new System.Windows.Forms.GroupBox();
-            this.rbScaleStretch = new System.Windows.Forms.RadioButton();
-            this.rbScaleFit = new System.Windows.Forms.RadioButton();
-            this.pbImage = new System.Windows.Forms.PictureBox();
-            this.groupBox3 = new System.Windows.Forms.GroupBox();
-            this.btnSaveHex = new System.Windows.Forms.Button();
-            this.groupBox1.SuspendLayout();
-            this.groupBox2.SuspendLayout();
-            this.gbScaling.SuspendLayout();
-            ((System.ComponentModel.ISupportInitialize)(this.pbImage)).BeginInit();
-            this.groupBox3.SuspendLayout();
-            this.SuspendLayout();
-            // 
-            // groupBox1
-            // 
-            this.groupBox1.Controls.Add(this.btnLoadImage);
-            this.groupBox1.Location = new System.Drawing.Point(20, 20);
-            this.groupBox1.Margin = new System.Windows.Forms.Padding(4, 5, 4, 5);
-            this.groupBox1.Name = "groupBox1";
-            this.groupBox1.Padding = new System.Windows.Forms.Padding(4, 5, 4, 5);
-            this.groupBox1.Size = new System.Drawing.Size(300, 217);
-            this.groupBox1.TabIndex = 0;
-            this.groupBox1.TabStop = false;
-            this.groupBox1.Text = "1. Load source Image";
-            // 
-            // btnLoadImage
-            // 
-            this.btnLoadImage.Location = new System.Drawing.Point(10, 31);
-            this.btnLoadImage.Margin = new System.Windows.Forms.Padding(4, 5, 4, 5);
-            this.btnLoadImage.Name = "btnLoadImage";
-            this.btnLoadImage.Size = new System.Drawing.Size(280, 35);
-            this.btnLoadImage.TabIndex = 0;
-            this.btnLoadImage.Text = "Load Image";
-            this.btnLoadImage.UseVisualStyleBackColor = true;
-            this.btnLoadImage.Click += new System.EventHandler(this.btnLoadImage_Click);
-            // 
-            // groupBox2
-            // 
-            this.groupBox2.Controls.Add(this.cbInvertImage);
-            this.groupBox2.Controls.Add(this.gbScaling);
-            this.groupBox2.Controls.Add(this.pbImage);
-            this.groupBox2.Location = new System.Drawing.Point(330, 20);
-            this.groupBox2.Margin = new System.Windows.Forms.Padding(4, 5, 4, 5);
-            this.groupBox2.Name = "groupBox2";
-            this.groupBox2.Padding = new System.Windows.Forms.Padding(4, 5, 4, 5);
-            this.groupBox2.Size = new System.Drawing.Size(300, 217);
-            this.groupBox2.TabIndex = 1;
-            this.groupBox2.TabStop = false;
-            this.groupBox2.Text = "2. Adjust image";
-            // 
-            // cbInvertImage
-            // 
-            this.cbInvertImage.AutoSize = true;
-            this.cbInvertImage.Location = new System.Drawing.Point(138, 122);
-            this.cbInvertImage.Margin = new System.Windows.Forms.Padding(4, 5, 4, 5);
-            this.cbInvertImage.Name = "cbInvertImage";
-            this.cbInvertImage.Size = new System.Drawing.Size(75, 24);
-            this.cbInvertImage.TabIndex = 2;
-            this.cbInvertImage.Text = "Invert";
-            this.cbInvertImage.UseVisualStyleBackColor = true;
-            this.cbInvertImage.CheckedChanged += new System.EventHandler(this.cbInvertImage_CheckedChanged);
-            // 
-            // gbScaling
-            // 
-            this.gbScaling.Controls.Add(this.rbScaleStretch);
-            this.gbScaling.Controls.Add(this.rbScaleFit);
-            this.gbScaling.Location = new System.Drawing.Point(9, 91);
-            this.gbScaling.Margin = new System.Windows.Forms.Padding(4, 5, 4, 5);
-            this.gbScaling.Name = "gbScaling";
-            this.gbScaling.Padding = new System.Windows.Forms.Padding(4, 5, 4, 5);
-            this.gbScaling.Size = new System.Drawing.Size(120, 117);
-            this.gbScaling.TabIndex = 1;
-            this.gbScaling.TabStop = false;
-            this.gbScaling.Text = "Scaling";
-            // 
-            // rbScaleStretch
-            // 
-            this.rbScaleStretch.AutoSize = true;
-            this.rbScaleStretch.Location = new System.Drawing.Point(10, 68);
-            this.rbScaleStretch.Margin = new System.Windows.Forms.Padding(4, 5, 4, 5);
-            this.rbScaleStretch.Name = "rbScaleStretch";
-            this.rbScaleStretch.Size = new System.Drawing.Size(86, 24);
-            this.rbScaleStretch.TabIndex = 1;
-            this.rbScaleStretch.Text = "Stretch";
-            this.rbScaleStretch.UseVisualStyleBackColor = true;
-            this.rbScaleStretch.CheckedChanged += new System.EventHandler(this.rbScaleStretch_CheckedChanged);
-            // 
-            // rbScaleFit
-            // 
-            this.rbScaleFit.AutoSize = true;
-            this.rbScaleFit.Checked = true;
-            this.rbScaleFit.Location = new System.Drawing.Point(10, 31);
-            this.rbScaleFit.Margin = new System.Windows.Forms.Padding(4, 5, 4, 5);
-            this.rbScaleFit.Name = "rbScaleFit";
-            this.rbScaleFit.Size = new System.Drawing.Size(52, 24);
-            this.rbScaleFit.TabIndex = 0;
-            this.rbScaleFit.TabStop = true;
-            this.rbScaleFit.Text = "Fit";
-            this.rbScaleFit.UseVisualStyleBackColor = true;
-            this.rbScaleFit.CheckedChanged += new System.EventHandler(this.rbScaleFit_CheckedChanged);
-            // 
-            // pbImage
-            // 
-            this.pbImage.BackColor = System.Drawing.Color.Black;
-            this.pbImage.Location = new System.Drawing.Point(4, 31);
-            this.pbImage.Margin = new System.Windows.Forms.Padding(4, 5, 4, 5);
-            this.pbImage.Name = "pbImage";
-            this.pbImage.Size = new System.Drawing.Size(192, 32);
-            this.pbImage.TabIndex = 0;
-            this.pbImage.TabStop = false;
-            // 
-            // groupBox3
-            // 
-            this.groupBox3.Controls.Add(this.btnSaveHex);
-            this.groupBox3.Location = new System.Drawing.Point(640, 20);
-            this.groupBox3.Margin = new System.Windows.Forms.Padding(4, 5, 4, 5);
-            this.groupBox3.Name = "groupBox3";
-            this.groupBox3.Padding = new System.Windows.Forms.Padding(4, 5, 4, 5);
-            this.groupBox3.Size = new System.Drawing.Size(300, 217);
-            this.groupBox3.TabIndex = 2;
-            this.groupBox3.TabStop = false;
-            this.groupBox3.Text = "3. Export";
-            // 
-            // btnSaveHex
-            // 
-            this.btnSaveHex.Location = new System.Drawing.Point(8, 91);
-            this.btnSaveHex.Margin = new System.Windows.Forms.Padding(4, 5, 4, 5);
-            this.btnSaveHex.Name = "btnSaveHex";
-            this.btnSaveHex.Size = new System.Drawing.Size(280, 35);
-            this.btnSaveHex.TabIndex = 0;
-            this.btnSaveHex.Text = "Save DFU File";
-            this.btnSaveHex.UseVisualStyleBackColor = true;
-            this.btnSaveHex.Click += new System.EventHandler(this.btnSaveHex_Click);
-            // 
-            // Form1
-            // 
-            this.AutoScaleDimensions = new System.Drawing.SizeF(9F, 20F);
-            this.AutoScaleMode = System.Windows.Forms.AutoScaleMode.Font;
-            this.ClientSize = new System.Drawing.Size(963, 265);
-            this.Controls.Add(this.groupBox3);
-            this.Controls.Add(this.groupBox2);
-            this.Controls.Add(this.groupBox1);
-            this.DoubleBuffered = true;
-            this.FormBorderStyle = System.Windows.Forms.FormBorderStyle.FixedDialog;
-            this.Margin = new System.Windows.Forms.Padding(4, 5, 4, 5);
-            this.Name = "Form1";
-            this.ShowIcon = false;
-            this.StartPosition = System.Windows.Forms.FormStartPosition.CenterScreen;
-            this.Text = "TS100 Custom Logo editor";
-            this.groupBox1.ResumeLayout(false);
-            this.groupBox2.ResumeLayout(false);
-            this.groupBox2.PerformLayout();
-            this.gbScaling.ResumeLayout(false);
-            this.gbScaling.PerformLayout();
-            ((System.ComponentModel.ISupportInitialize)(this.pbImage)).EndInit();
-            this.groupBox3.ResumeLayout(false);
-            this.ResumeLayout(false);
-
-        }
-
-        #endregion
-
-        private System.Windows.Forms.GroupBox groupBox1;
-        private System.Windows.Forms.Button btnLoadImage;
-        private System.Windows.Forms.GroupBox groupBox2;
-        private System.Windows.Forms.CheckBox cbInvertImage;
-        private System.Windows.Forms.GroupBox gbScaling;
-        private System.Windows.Forms.RadioButton rbScaleStretch;
-        private System.Windows.Forms.RadioButton rbScaleFit;
-        private System.Windows.Forms.PictureBox pbImage;
-        private System.Windows.Forms.GroupBox groupBox3;
-        private System.Windows.Forms.Button btnSaveHex;
-    }
-}
-

Bootup Logo/Logo GUI/TS100 Logo Editor/TS100 Logo Editor/Form1.cs

@@ -1,169 +0,0 @@
-
-using System;
-using System.Drawing;
-using System.Windows.Forms;
-
-namespace TS100_Logo_Editor
-{
-    public partial class Form1 : Form
-    {
-        public Form1()
-        {
-            InitializeComponent();
-        }
-        Image sourceImage;
-        const int LCDWidth = 96;
-        Bitmap PureBMP;
-        private void btnLoadImage_Click(object sender, EventArgs e)
-        {
-            //load in an image
-            OpenFileDialog dlg = new OpenFileDialog();
-            dlg.Title = "Select Image";
-            dlg.Filter = "Image files (*.jpg, *.jpeg, *.bmp, *.png) | *.jpg; *.jpeg; *.bmp; *.png";
-            if (dlg.ShowDialog() == DialogResult.OK)
-            {
-                //user has selected an image
-                string filename = dlg.FileName;
-                sourceImage = Image.FromFile(filename);
-                reDrawPreview();
-            }
-
-        }
-
-        private void reDrawPreview()
-        {
-            PureBMP = new Bitmap(LCDWidth, 16);
-            //scale mode
-            if (rbScaleFit.Checked)
-            {
-                //fit
-                float scalefactor = Math.Min((float)PureBMP.Width / (float)sourceImage.Width, (float)PureBMP.Height / (float)sourceImage.Height);
-                using (Graphics g = Graphics.FromImage(PureBMP))
-                {
-                    g.DrawImage(sourceImage, new RectangleF(0, 0, sourceImage.Width * scalefactor, sourceImage.Height * scalefactor));
-                }
-            }
-            else
-            {
-                //draw image stretched
-                using (Graphics g = Graphics.FromImage(PureBMP))
-                {
-                    g.DrawImage(sourceImage, new RectangleF(0, 0, LCDWidth, 16));
-                }
-            }
-            //We now have our downsampled colour image
-            //apply inversion
-            if (cbInvertImage.Checked)
-            {
-                for (int y = 0; (y <= (PureBMP.Height - 1)); y++)
-                {
-                    for (int x = 0; (x <= (PureBMP.Width - 1)); x++)
-                    {
-                        Color inv = PureBMP.GetPixel(x, y);
-                        inv = Color.FromArgb(255, (255 - inv.R), (255 - inv.G), (255 - inv.B));
-                        PureBMP.SetPixel(x, y, inv);
-                    }
-                }
-            }
-
-            //Threshold image
-            PureBMP = GrayScale(PureBMP);
-            //draw image at 2x scale
-            Bitmap bBig = new Bitmap(pbImage.Width, pbImage.Height);
-            using (Graphics g = Graphics.FromImage(bBig))
-            {
-                g.DrawImage(PureBMP, new RectangleF(0, 0, pbImage.Width, pbImage.Height));
-            }
-            pbImage.Image = bBig;
-        }
-        public Bitmap GrayScale(Bitmap Bmp)
-        {
-            int rgb;
-            Color c;
-
-            for (int y = 0; y < Bmp.Height; y++)
-                for (int x = 0; x < Bmp.Width; x++)
-                {
-                    c = Bmp.GetPixel(x, y);
-                    rgb = (int)((c.R + c.G + c.B) / 3);
-                    if (rgb > 128)
-                        rgb = 0xFF;
-                    else
-                        rgb = 0x00;
-                    Bmp.SetPixel(x, y, Color.FromArgb(rgb, rgb, rgb));
-                }
-            return Bmp;
-        }
-
-        private void rbScaleStretch_CheckedChanged(object sender, EventArgs e)
-        {
-            reDrawPreview();
-        }
-
-        private void rbScaleFit_CheckedChanged(object sender, EventArgs e)
-        {
-            reDrawPreview();
-        }
-
-        private void cbInvertImage_CheckedChanged(object sender, EventArgs e)
-        {
-            reDrawPreview();
-        }
-
-        private void btnSaveHex_Click(object sender, EventArgs e)
-        {
-            Bitmap bmp = PureBMP;
-            //convert image to byte array
-            byte[] data = new byte[1024];
-            data[0] = 0xAA;
-            data[1] = 0x55;
-            data[2] = 0xF0;
-            data[3] = 0x0D;
-
-            for (int i = 0; i < (LCDWidth * 16 / 8); i++)
-            {
-                //loop through all the bytes
-                byte b = 0;//local byte
-                //i sets the starting column
-                for (int y = 0; y < 8; y++)
-                {
-                    var px = bmp.GetPixel(i % LCDWidth, (i / LCDWidth) == 1 ? 8 + y : y);
-                    //we loop down the picture
-                    //LSB is the top, MSB is the bottom
-                    if (px.R >= 128)
-                    {
-                        //pixel is white
-                        b |= (byte)(1 << y);
-                    }
-                }
-                data[i + 4] = b;
-            }
-            //We should now have the byte array that represents the image in the LCD format.
-            //We now send this off to be encoded by the Intel Encoder
-            //Flip all uint16_t pairs
-            for (int i = 0; i < data.Length; i += 2)
-            {
-                //we need to swap each pair
-                byte temp = data[i];
-                data[i] = data[i + 1];
-                data[i + 1] = temp;
-            }
-            string outputHexFile = IntelHex.IntelHex.encode(data, 0x0800B800, 16, true, true);//16 bytes is the only format the DFU seems to support //0x0800B800
-            //^ This string now just needs to be written out to a text file :)
-            SaveFileDialog dlg = new SaveFileDialog();
-            dlg.Title = "Save DFU File";
-            dlg.AddExtension = true;
-            dlg.DefaultExt = ".hex";
-            dlg.Filter = "Hex Files(*.hex)|*.hex";
-            if (dlg.ShowDialog() == DialogResult.OK)
-            {
-                //The user has selected where they want to save the file
-                using (var fs = new System.IO.StreamWriter(dlg.FileName))
-                {
-                    fs.Write(outputHexFile);
-                }
-            }
-
-        }
-    }
-}

Bootup Logo/Logo GUI/TS100 Logo Editor/TS100 Logo Editor/Form1.resx

@@ -1,120 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<root>
-  <!-- 
-    Microsoft ResX Schema 
-    
-    Version 2.0
-    
-    The primary goals of this format is to allow a simple XML format 
-    that is mostly human readable. The generation and parsing of the 
-    various data types are done through the TypeConverter classes 
-    associated with the data types.
-    
-    Example:
-    
-    ... ado.net/XML headers & schema ...
-    <resheader name="resmimetype">text/microsoft-resx</resheader>
-    <resheader name="version">2.0</resheader>
-    <resheader name="reader">System.Resources.ResXResourceReader, System.Windows.Forms, ...</resheader>
-    <resheader name="writer">System.Resources.ResXResourceWriter, System.Windows.Forms, ...</resheader>
-    <data name="Name1"><value>this is my long string</value><comment>this is a comment</comment></data>
-    <data name="Color1" type="System.Drawing.Color, System.Drawing">Blue</data>
-    <data name="Bitmap1" mimetype="application/x-microsoft.net.object.binary.base64">
-        <value>[base64 mime encoded serialized .NET Framework object]</value>
-    </data>
-    <data name="Icon1" type="System.Drawing.Icon, System.Drawing" mimetype="application/x-microsoft.net.object.bytearray.base64">
-        <value>[base64 mime encoded string representing a byte array form of the .NET Framework object]</value>
-        <comment>This is a comment</comment>
-    </data>
-                
-    There are any number of "resheader" rows that contain simple 
-    name/value pairs.
-    
-    Each data row contains a name, and value. The row also contains a 
-    type or mimetype. Type corresponds to a .NET class that support 
-    text/value conversion through the TypeConverter architecture. 
-    Classes that don't support this are serialized and stored with the 
-    mimetype set.
-    
-    The mimetype is used for serialized objects, and tells the 
-    ResXResourceReader how to depersist the object. This is currently not 
-    extensible. For a given mimetype the value must be set accordingly:
-    
-    Note - application/x-microsoft.net.object.binary.base64 is the format 
-    that the ResXResourceWriter will generate, however the reader can 
-    read any of the formats listed below.
-    
-    mimetype: application/x-microsoft.net.object.binary.base64
-    value   : The object must be serialized with 
-            : System.Runtime.Serialization.Formatters.Binary.BinaryFormatter
-            : and then encoded with base64 encoding.
-    
-    mimetype: application/x-microsoft.net.object.soap.base64
-    value   : The object must be serialized with 
-            : System.Runtime.Serialization.Formatters.Soap.SoapFormatter
-            : and then encoded with base64 encoding.
-
-    mimetype: application/x-microsoft.net.object.bytearray.base64
-    value   : The object must be serialized into a byte array 
-            : using a System.ComponentModel.TypeConverter
-            : and then encoded with base64 encoding.
-    -->
-  <xsd:schema id="root" xmlns="" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata">
-    <xsd:import namespace="http://www.w3.org/XML/1998/namespace" />
-    <xsd:element name="root" msdata:IsDataSet="true">
-      <xsd:complexType>
-        <xsd:choice maxOccurs="unbounded">
-          <xsd:element name="metadata">
-            <xsd:complexType>
-              <xsd:sequence>
-                <xsd:element name="value" type="xsd:string" minOccurs="0" />
-              </xsd:sequence>
-              <xsd:attribute name="name" use="required" type="xsd:string" />
-              <xsd:attribute name="type" type="xsd:string" />
-              <xsd:attribute name="mimetype" type="xsd:string" />
-              <xsd:attribute ref="xml:space" />
-            </xsd:complexType>
-          </xsd:element>
-          <xsd:element name="assembly">
-            <xsd:complexType>
-              <xsd:attribute name="alias" type="xsd:string" />
-              <xsd:attribute name="name" type="xsd:string" />
-            </xsd:complexType>
-          </xsd:element>
-          <xsd:element name="data">
-            <xsd:complexType>
-              <xsd:sequence>
-                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
-                <xsd:element name="comment" type="xsd:string" minOccurs="0" msdata:Ordinal="2" />
-              </xsd:sequence>
-              <xsd:attribute name="name" type="xsd:string" use="required" msdata:Ordinal="1" />
-              <xsd:attribute name="type" type="xsd:string" msdata:Ordinal="3" />
-              <xsd:attribute name="mimetype" type="xsd:string" msdata:Ordinal="4" />
-              <xsd:attribute ref="xml:space" />
-            </xsd:complexType>
-          </xsd:element>
-          <xsd:element name="resheader">
-            <xsd:complexType>
-              <xsd:sequence>
-                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
-              </xsd:sequence>
-              <xsd:attribute name="name" type="xsd:string" use="required" />
-            </xsd:complexType>
-          </xsd:element>
-        </xsd:choice>
-      </xsd:complexType>
-    </xsd:element>
-  </xsd:schema>
-  <resheader name="resmimetype">
-    <value>text/microsoft-resx</value>
-  </resheader>
-  <resheader name="version">
-    <value>2.0</value>
-  </resheader>
-  <resheader name="reader">
-    <value>System.Resources.ResXResourceReader, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
-  </resheader>
-  <resheader name="writer">
-    <value>System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
-  </resheader>
-</root>

Bootup Logo/Logo GUI/TS100 Logo Editor/TS100 Logo Editor/IntelHex.cs

@@ -1,96 +0,0 @@
-using System;
-using System.Collections.Generic;
-using System.ComponentModel;
-using System.Data;
-
-namespace IntelHex
-{
-    public class IntelHex
-    {
-        public static string encode(byte[] data, UInt32 startingAddress, int bytesPerLine, bool header = true,bool Addbloat=false)
-        {
-            //We are taking the byte array and encoding it into the wanted hex file contents (aka string of data).
-            //First create the starting base address record
-            //:020000040800F2
-            string Output = "";
-            if (header)
-            {
-                //Set the upper 16 bits of the address space
-                Output += getHighAddressSetLine((UInt16)(startingAddress >> 16));
-            }
-
-            //Now loop through all the data that we were given
-            for (UInt32 index = 0; index < data.Length; index = (UInt32)(index + bytesPerLine))
-            {
-                //We want to read from data[index] to data[index+bytesPerLine-1]
-                UInt32 currentAddress = (UInt32)(startingAddress + index);
-                if ((currentAddress >> 16) != (startingAddress >> 16))
-                {
-                    Output += getHighAddressSetLine((UInt16)(currentAddress >> 16));
-                    //The address has rolled over the 64K boundry, so write a new high address change line
-                }
-                //We should now be good for the higher part of the address
-                Output += encodeDataLine((UInt16)(currentAddress & 0xFFFF), data, index, bytesPerLine);
-            }
-            if(Addbloat)
-            {
-                //Repeat the instructs a stack of times to get around filesize minimums
-                for(int x=0;x<3;x++)
-                {
-                    for (UInt32 index = 0; index < data.Length; index = (UInt32)(index + bytesPerLine))
-                    {
-                        //We want to read from data[index] to data[index+bytesPerLine-1]
-                        UInt32 currentAddress = (UInt32)(startingAddress + index);
-                        if ((currentAddress >> 16) != (startingAddress >> 16))
-                        {
-                            Output += getHighAddressSetLine((UInt16)(currentAddress >> 16));
-                            //The address has rolled over the 64K boundry, so write a new high address change line
-                        }
-                        //We should now be good for the higher part of the address
-                        Output += encodeDataLine((UInt16)(currentAddress & 0xFFFF), data, index, bytesPerLine);
-                    }
-                }
-            }
-            //We have now written out all the data lines
-            Output += ":00000001FF\r\n";//End of file marker
-
-            return Output;
-        }
-        private static string encodeDataLine(UInt16 address, byte[] data, UInt32 startindex, int bytes)
-        {
-            string line = ":";
-            line += bytes.ToString("X2");//add the marker of line length
-            line += address.ToString("X4");//write the address
-            line += "00";//Data line
-            //Next copy bytes bytes 
-            for (int i = 0; i < bytes; i++)
-            {
-                if ((startindex + i) < data.Length)
-                    line += data[startindex + i].ToString("X2");
-                else
-                    line += "FF";//pad images out with FF
-            }
-            line += checksumLine(line);//Adds checksum and EOL
-            return line;
-        }
-        private static string getHighAddressSetLine(UInt16 HighAddress)
-        {
-            string Output = "";
-            Output += ":02000004" + (HighAddress).ToString("X4");
-            Output += checksumLine(Output);
-            return Output;
-        }
-        private static string checksumLine(string line)
-        {
-            //We want to convert the string line to each byte and sum. 
-            byte sum = 0;
-            for (int i = 1; i < line.Length; i += 2)
-            {
-                byte b = byte.Parse((line.Substring(i, 2)), System.Globalization.NumberStyles.HexNumber);
-                sum += b;
-            }
-            byte checksum = (byte)(((byte)0) - sum);//invert
-            return checksum.ToString("X2") + "\r\n";
-        }
-    }
-}

Bootup Logo/Logo GUI/TS100 Logo Editor/TS100 Logo Editor/Program.cs

@@ -1,22 +0,0 @@
-using System;
-using System.Collections.Generic;
-using System.Linq;
-using System.Threading.Tasks;
-using System.Windows.Forms;
-
-namespace TS100_Logo_Editor
-{
-    static class Program
-    {
-        /// <summary>
-        /// The main entry point for the application.
-        /// </summary>
-        [STAThread]
-        static void Main()
-        {
-            Application.EnableVisualStyles();
-            Application.SetCompatibleTextRenderingDefault(false);
-            Application.Run(new Form1());
-        }
-    }
-}

Bootup Logo/Logo GUI/TS100 Logo Editor/TS100 Logo Editor/Properties/AssemblyInfo.cs

@@ -1,36 +0,0 @@
-using System.Reflection;
-using System.Runtime.CompilerServices;
-using System.Runtime.InteropServices;
-
-// General Information about an assembly is controlled through the following
-// set of attributes. Change these attribute values to modify the information
-// associated with an assembly.
-[assembly: AssemblyTitle("TS100 Logo Editor")]
-[assembly: AssemblyDescription("")]
-[assembly: AssemblyConfiguration("")]
-[assembly: AssemblyCompany("")]
-[assembly: AssemblyProduct("TS100 Logo Editor")]
-[assembly: AssemblyCopyright("Copyright ©  2017")]
-[assembly: AssemblyTrademark("")]
-[assembly: AssemblyCulture("")]
-
-// Setting ComVisible to false makes the types in this assembly not visible
-// to COM components.  If you need to access a type in this assembly from
-// COM, set the ComVisible attribute to true on that type.
-[assembly: ComVisible(false)]
-
-// The following GUID is for the ID of the typelib if this project is exposed to COM
-[assembly: Guid("206c8aef-3be6-44e9-a1b0-25bf3805f1cb")]
-
-// Version information for an assembly consists of the following four values:
-//
-//      Major Version
-//      Minor Version
-//      Build Number
-//      Revision
-//
-// You can specify all the values or you can default the Build and Revision Numbers
-// by using the '*' as shown below:
-// [assembly: AssemblyVersion("1.0.*")]
-[assembly: AssemblyVersion("1.0.0.0")]
-[assembly: AssemblyFileVersion("1.0.0.0")]

Bootup Logo/Logo GUI/TS100 Logo Editor/TS100 Logo Editor/Properties/Resources.Designer.cs

@@ -1,63 +0,0 @@
-//------------------------------------------------------------------------------
-// <auto-generated>
-//     This code was generated by a tool.
-//     Runtime Version:4.0.30319.42000
-//
-//     Changes to this file may cause incorrect behavior and will be lost if
-//     the code is regenerated.
-// </auto-generated>
-//------------------------------------------------------------------------------
-
-namespace TS100_Logo_Editor.Properties {
-    using System;
-    
-    
-    /// <summary>
-    ///   A strongly-typed resource class, for looking up localized strings, etc.
-    /// </summary>
-    // This class was auto-generated by the StronglyTypedResourceBuilder
-    // class via a tool like ResGen or Visual Studio.
-    // To add or remove a member, edit your .ResX file then rerun ResGen
-    // with the /str option, or rebuild your VS project.
-    [global::System.CodeDom.Compiler.GeneratedCodeAttribute("System.Resources.Tools.StronglyTypedResourceBuilder", "4.0.0.0")]
-    [global::System.Diagnostics.DebuggerNonUserCodeAttribute()]
-    [global::System.Runtime.CompilerServices.CompilerGeneratedAttribute()]
-    internal class Resources {
-        
-        private static global::System.Resources.ResourceManager resourceMan;
-        
-        private static global::System.Globalization.CultureInfo resourceCulture;
-        
-        [global::System.Diagnostics.CodeAnalysis.SuppressMessageAttribute("Microsoft.Performance", "CA1811:AvoidUncalledPrivateCode")]
-        internal Resources() {
-        }
-        
-        /// <summary>
-        ///   Returns the cached ResourceManager instance used by this class.
-        /// </summary>
-        [global::System.ComponentModel.EditorBrowsableAttribute(global::System.ComponentModel.EditorBrowsableState.Advanced)]
-        internal static global::System.Resources.ResourceManager ResourceManager {
-            get {
-                if (object.ReferenceEquals(resourceMan, null)) {
-                    global::System.Resources.ResourceManager temp = new global::System.Resources.ResourceManager("TS100_Logo_Editor.Properties.Resources", typeof(Resources).Assembly);
-                    resourceMan = temp;
-                }
-                return resourceMan;
-            }
-        }
-        
-        /// <summary>
-        ///   Overrides the current thread's CurrentUICulture property for all
-        ///   resource lookups using this strongly typed resource class.
-        /// </summary>
-        [global::System.ComponentModel.EditorBrowsableAttribute(global::System.ComponentModel.EditorBrowsableState.Advanced)]
-        internal static global::System.Globalization.CultureInfo Culture {
-            get {
-                return resourceCulture;
-            }
-            set {
-                resourceCulture = value;
-            }
-        }
-    }
-}

Bootup Logo/Logo GUI/TS100 Logo Editor/TS100 Logo Editor/Properties/Resources.resx

@@ -1,117 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<root>
-  <!-- 
-    Microsoft ResX Schema 
-    
-    Version 2.0
-    
-    The primary goals of this format is to allow a simple XML format 
-    that is mostly human readable. The generation and parsing of the 
-    various data types are done through the TypeConverter classes 
-    associated with the data types.
-    
-    Example:
-    
-    ... ado.net/XML headers & schema ...
-    <resheader name="resmimetype">text/microsoft-resx</resheader>
-    <resheader name="version">2.0</resheader>
-    <resheader name="reader">System.Resources.ResXResourceReader, System.Windows.Forms, ...</resheader>
-    <resheader name="writer">System.Resources.ResXResourceWriter, System.Windows.Forms, ...</resheader>
-    <data name="Name1"><value>this is my long string</value><comment>this is a comment</comment></data>
-    <data name="Color1" type="System.Drawing.Color, System.Drawing">Blue</data>
-    <data name="Bitmap1" mimetype="application/x-microsoft.net.object.binary.base64">
-        <value>[base64 mime encoded serialized .NET Framework object]</value>
-    </data>
-    <data name="Icon1" type="System.Drawing.Icon, System.Drawing" mimetype="application/x-microsoft.net.object.bytearray.base64">
-        <value>[base64 mime encoded string representing a byte array form of the .NET Framework object]</value>
-        <comment>This is a comment</comment>
-    </data>
-                
-    There are any number of "resheader" rows that contain simple 
-    name/value pairs.
-    
-    Each data row contains a name, and value. The row also contains a 
-    type or mimetype. Type corresponds to a .NET class that support 
-    text/value conversion through the TypeConverter architecture. 
-    Classes that don't support this are serialized and stored with the 
-    mimetype set.
-    
-    The mimetype is used for serialized objects, and tells the 
-    ResXResourceReader how to depersist the object. This is currently not 
-    extensible. For a given mimetype the value must be set accordingly:
-    
-    Note - application/x-microsoft.net.object.binary.base64 is the format 
-    that the ResXResourceWriter will generate, however the reader can 
-    read any of the formats listed below.
-    
-    mimetype: application/x-microsoft.net.object.binary.base64
-    value   : The object must be serialized with 
-            : System.Serialization.Formatters.Binary.BinaryFormatter
-            : and then encoded with base64 encoding.
-    
-    mimetype: application/x-microsoft.net.object.soap.base64
-    value   : The object must be serialized with 
-            : System.Runtime.Serialization.Formatters.Soap.SoapFormatter
-            : and then encoded with base64 encoding.
-
-    mimetype: application/x-microsoft.net.object.bytearray.base64
-    value   : The object must be serialized into a byte array 
-            : using a System.ComponentModel.TypeConverter
-            : and then encoded with base64 encoding.
-    -->
-  <xsd:schema id="root" xmlns="" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata">
-    <xsd:element name="root" msdata:IsDataSet="true">
-      <xsd:complexType>
-        <xsd:choice maxOccurs="unbounded">
-          <xsd:element name="metadata">
-            <xsd:complexType>
-              <xsd:sequence>
-                <xsd:element name="value" type="xsd:string" minOccurs="0" />
-              </xsd:sequence>
-              <xsd:attribute name="name" type="xsd:string" />
-              <xsd:attribute name="type" type="xsd:string" />
-              <xsd:attribute name="mimetype" type="xsd:string" />
-            </xsd:complexType>
-          </xsd:element>
-          <xsd:element name="assembly">
-            <xsd:complexType>
-              <xsd:attribute name="alias" type="xsd:string" />
-              <xsd:attribute name="name" type="xsd:string" />
-            </xsd:complexType>
-          </xsd:element>
-          <xsd:element name="data">
-            <xsd:complexType>
-              <xsd:sequence>
-                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
-                <xsd:element name="comment" type="xsd:string" minOccurs="0" msdata:Ordinal="2" />
-              </xsd:sequence>
-              <xsd:attribute name="name" type="xsd:string" msdata:Ordinal="1" />
-              <xsd:attribute name="type" type="xsd:string" msdata:Ordinal="3" />
-              <xsd:attribute name="mimetype" type="xsd:string" msdata:Ordinal="4" />
-            </xsd:complexType>
-          </xsd:element>
-          <xsd:element name="resheader">
-            <xsd:complexType>
-              <xsd:sequence>
-                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
-              </xsd:sequence>
-              <xsd:attribute name="name" type="xsd:string" use="required" />
-            </xsd:complexType>
-          </xsd:element>
-        </xsd:choice>
-      </xsd:complexType>
-    </xsd:element>
-  </xsd:schema>
-  <resheader name="resmimetype">
-    <value>text/microsoft-resx</value>
-  </resheader>
-  <resheader name="version">
-    <value>2.0</value>
-  </resheader>
-  <resheader name="reader">
-    <value>System.Resources.ResXResourceReader, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
-  </resheader>
-  <resheader name="writer">
-    <value>System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
-  </resheader>
-</root>

Bootup Logo/Logo GUI/TS100 Logo Editor/TS100 Logo Editor/Properties/Settings.Designer.cs

@@ -1,26 +0,0 @@
-//------------------------------------------------------------------------------
-// <auto-generated>
-//     This code was generated by a tool.
-//     Runtime Version:4.0.30319.42000
-//
-//     Changes to this file may cause incorrect behavior and will be lost if
-//     the code is regenerated.
-// </auto-generated>
-//------------------------------------------------------------------------------
-
-namespace TS100_Logo_Editor.Properties {
-    
-    
-    [global::System.Runtime.CompilerServices.CompilerGeneratedAttribute()]
-    [global::System.CodeDom.Compiler.GeneratedCodeAttribute("Microsoft.VisualStudio.Editors.SettingsDesigner.SettingsSingleFileGenerator", "15.1.0.0")]
-    internal sealed partial class Settings : global::System.Configuration.ApplicationSettingsBase {
-        
-        private static Settings defaultInstance = ((Settings)(global::System.Configuration.ApplicationSettingsBase.Synchronized(new Settings())));
-        
-        public static Settings Default {
-            get {
-                return defaultInstance;
-            }
-        }
-    }
-}

Bootup Logo/Logo GUI/TS100 Logo Editor/TS100 Logo Editor/Properties/Settings.settings

@@ -1,7 +0,0 @@
-<?xml version='1.0' encoding='utf-8'?>
-<SettingsFile xmlns="http://schemas.microsoft.com/VisualStudio/2004/01/settings" CurrentProfile="(Default)">
-  <Profiles>
-    <Profile Name="(Default)" />
-  </Profiles>
-  <Settings />
-</SettingsFile>

Bootup Logo/Logo GUI/TS100 Logo Editor/TS100 Logo Editor/TS100 Logo Editor.csproj

@@ -1,87 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<Project ToolsVersion="15.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
-  <Import Project="$(MSBuildExtensionsPath)\$(MSBuildToolsVersion)\Microsoft.Common.props" Condition="Exists('$(MSBuildExtensionsPath)\$(MSBuildToolsVersion)\Microsoft.Common.props')" />
-  <PropertyGroup>
-    <Configuration Condition=" '$(Configuration)' == '' ">Debug</Configuration>
-    <Platform Condition=" '$(Platform)' == '' ">AnyCPU</Platform>
-    <ProjectGuid>{206C8AEF-3BE6-44E9-A1B0-25BF3805F1CB}</ProjectGuid>
-    <OutputType>WinExe</OutputType>
-    <RootNamespace>TS100_Logo_Editor</RootNamespace>
-    <AssemblyName>TS100 Logo Editor</AssemblyName>
-    <TargetFrameworkVersion>v4.0</TargetFrameworkVersion>
-    <FileAlignment>512</FileAlignment>
-    <TargetFrameworkProfile />
-  </PropertyGroup>
-  <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Debug|AnyCPU' ">
-    <PlatformTarget>AnyCPU</PlatformTarget>
-    <DebugSymbols>true</DebugSymbols>
-    <DebugType>full</DebugType>
-    <Optimize>false</Optimize>
-    <OutputPath>bin\Debug\</OutputPath>
-    <DefineConstants>DEBUG;TRACE</DefineConstants>
-    <ErrorReport>prompt</ErrorReport>
-    <WarningLevel>4</WarningLevel>
-  </PropertyGroup>
-  <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Release|AnyCPU' ">
-    <PlatformTarget>AnyCPU</PlatformTarget>
-    <DebugType>pdbonly</DebugType>
-    <Optimize>true</Optimize>
-    <OutputPath>bin\Release\</OutputPath>
-    <DefineConstants>
-    </DefineConstants>
-    <ErrorReport>prompt</ErrorReport>
-    <WarningLevel>4</WarningLevel>
-  </PropertyGroup>
-  <PropertyGroup>
-    <StartupObject>TS100_Logo_Editor.Program</StartupObject>
-  </PropertyGroup>
-  <ItemGroup>
-    <Reference Include="System" />
-    <Reference Include="System.Core" />
-    <Reference Include="System.Xml.Linq" />
-    <Reference Include="System.Data.DataSetExtensions" />
-    <Reference Include="Microsoft.CSharp" />
-    <Reference Include="System.Data" />
-    <Reference Include="System.Deployment" />
-    <Reference Include="System.Drawing" />
-    <Reference Include="System.Windows.Forms" />
-    <Reference Include="System.Xml" />
-  </ItemGroup>
-  <ItemGroup>
-    <Compile Include="Form1.cs">
-      <SubType>Form</SubType>
-    </Compile>
-    <Compile Include="Form1.Designer.cs">
-      <DependentUpon>Form1.cs</DependentUpon>
-    </Compile>
-    <Compile Include="IntelHex.cs" />
-    <Compile Include="Program.cs" />
-    <Compile Include="Properties\AssemblyInfo.cs" />
-    <EmbeddedResource Include="Form1.resx">
-      <DependentUpon>Form1.cs</DependentUpon>
-    </EmbeddedResource>
-    <EmbeddedResource Include="Properties\Resources.resx">
-      <Generator>ResXFileCodeGenerator</Generator>
-      <LastGenOutput>Resources.Designer.cs</LastGenOutput>
-      <SubType>Designer</SubType>
-    </EmbeddedResource>
-    <Compile Include="Properties\Resources.Designer.cs">
-      <AutoGen>True</AutoGen>
-      <DependentUpon>Resources.resx</DependentUpon>
-      <DesignTime>True</DesignTime>
-    </Compile>
-    <None Include="Properties\Settings.settings">
-      <Generator>SettingsSingleFileGenerator</Generator>
-      <LastGenOutput>Settings.Designer.cs</LastGenOutput>
-    </None>
-    <Compile Include="Properties\Settings.Designer.cs">
-      <AutoGen>True</AutoGen>
-      <DependentUpon>Settings.settings</DependentUpon>
-      <DesignTimeSharedInput>True</DesignTimeSharedInput>
-    </Compile>
-  </ItemGroup>
-  <ItemGroup>
-    <None Include="App.config" />
-  </ItemGroup>
-  <Import Project="$(MSBuildToolsPath)\Microsoft.CSharp.targets" />
-</Project>

Bootup Logo/Logo GUI/TS100 Logo Editor/TS100 Logo Editor/obj/Debug/CoreCompileInputs.cache

@@ -1 +0,0 @@
-1f6b9b8bf2c9e759acd19ce919cfeae19b243aa0

Bootup Logo/Logos/001_PINECIL.hex

@@ -0,0 +1,258 @@
+:020000040800F2
+:10F8000055AA0DF080002A540215808180808080E6
+:10F810008080808080808080008000000000000068
+:10F82000408040C020C03030905010F010101010B8
+:10F830001010101010101010F010101010101010E8
+:10F8400010101010D09050D0505050505050505078
+:10F8500050505050D0D0D0D0D0D0109010101010A8
+:10F86000101000E002000502050508080808080855
+:10F87000080808080808080805080505050507051B
+:10F880001008101F201F62604850407F40404040D9
+:10F8900040404040404040407F4047404747424012
+:10F8A000424747405F4F505F50505050505050506B
+:10F8B000505050505F5F58585F58474F4740424044
+:10F8C0004040003F00000000000000000000000079
+:10F8D0000000000000000000000000000000000028
+:10F8E0000000000000000000000000000000000018
+:10F8F0000000000000000000000000000000000008
+:10F9000000000000000000000000000000000000F7
+:10F9100000000000000000000000000000000000E7
+:10F9200000000000000000000000000000000000D7
+:10F9300000000000000000000000000000000000C7
+:10F9400000000000000000000000000000000000B7
+:10F9500000000000000000000000000000000000A7
+:10F960000000000000000000000000000000000097
+:10F970000000000000000000000000000000000087
+:10F980000000000000000000000000000000000077
+:10F990000000000000000000000000000000000067
+:10F9A0000000000000000000000000000000000057
+:10F9B0000000000000000000000000000000000047
+:10F9C0000000000000000000000000000000000037
+:10F9D0000000000000000000000000000000000027
+:10F9E0000000000000000000000000000000000017
+:10F9F0000000000000000000000000000000000007
+:10FA000000000000000000000000000000000000F6
+:10FA100000000000000000000000000000000000E6
+:10FA200000000000000000000000000000000000D6
+:10FA300000000000000000000000000000000000C6
+:10FA400000000000000000000000000000000000B6
+:10FA500000000000000000000000000000000000A6
+:10FA60000000000000000000000000000000000096
+:10FA70000000000000000000000000000000000086
+:10FA80000000000000000000000000000000000076
+:10FA90000000000000000000000000000000000066
+:10FAA0000000000000000000000000000000000056
+:10FAB0000000000000000000000000000000000046
+:10FAC0000000000000000000000000000000000036
+:10FAD0000000000000000000000000000000000026
+:10FAE0000000000000000000000000000000000016
+:10FAF0000000000000000000000000000000000006
+:10FB000000000000000000000000000000000000F5
+:10FB100000000000000000000000000000000000E5
+:10FB200000000000000000000000000000000000D5
+:10FB300000000000000000000000000000000000C5
+:10FB400000000000000000000000000000000000B5
+:10FB500000000000000000000000000000000000A5
+:10FB60000000000000000000000000000000000095
+:10FB70000000000000000000000000000000000085
+:10FB80000000000000000000000000000000000075
+:10FB90000000000000000000000000000000000065
+:10FBA0000000000000000000000000000000000055
+:10FBB0000000000000000000000000000000000045
+:10FBC0000000000000000000000000000000000035
+:10FBD0000000000000000000000000000000000025
+:10FBE0000000000000000000000000000000000015
+:10FBF0000000000000000000000000000000000005
+:10F8000055AA0DF080002A540215808180808080E6
+:10F810008080808080808080008000000000000068
+:10F82000408040C020C03030905010F010101010B8
+:10F830001010101010101010F010101010101010E8
+:10F8400010101010D09050D0505050505050505078
+:10F8500050505050D0D0D0D0D0D0109010101010A8
+:10F86000101000E002000502050508080808080855
+:10F87000080808080808080805080505050507051B
+:10F880001008101F201F62604850407F40404040D9
+:10F8900040404040404040407F4047404747424012
+:10F8A000424747405F4F505F50505050505050506B
+:10F8B000505050505F5F58585F58474F4740424044
+:10F8C0004040003F00000000000000000000000079
+:10F8D0000000000000000000000000000000000028
+:10F8E0000000000000000000000000000000000018
+:10F8F0000000000000000000000000000000000008
+:10F9000000000000000000000000000000000000F7
+:10F9100000000000000000000000000000000000E7
+:10F9200000000000000000000000000000000000D7
+:10F9300000000000000000000000000000000000C7
+:10F9400000000000000000000000000000000000B7
+:10F9500000000000000000000000000000000000A7
+:10F960000000000000000000000000000000000097
+:10F970000000000000000000000000000000000087
+:10F980000000000000000000000000000000000077
+:10F990000000000000000000000000000000000067
+:10F9A0000000000000000000000000000000000057
+:10F9B0000000000000000000000000000000000047
+:10F9C0000000000000000000000000000000000037
+:10F9D0000000000000000000000000000000000027
+:10F9E0000000000000000000000000000000000017
+:10F9F0000000000000000000000000000000000007
+:10FA000000000000000000000000000000000000F6
+:10FA100000000000000000000000000000000000E6
+:10FA200000000000000000000000000000000000D6
+:10FA300000000000000000000000000000000000C6
+:10FA400000000000000000000000000000000000B6
+:10FA500000000000000000000000000000000000A6
+:10FA60000000000000000000000000000000000096
+:10FA70000000000000000000000000000000000086
+:10FA80000000000000000000000000000000000076
+:10FA90000000000000000000000000000000000066
+:10FAA0000000000000000000000000000000000056
+:10FAB0000000000000000000000000000000000046
+:10FAC0000000000000000000000000000000000036
+:10FAD0000000000000000000000000000000000026
+:10FAE0000000000000000000000000000000000016
+:10FAF0000000000000000000000000000000000006
+:10FB000000000000000000000000000000000000F5
+:10FB100000000000000000000000000000000000E5
+:10FB200000000000000000000000000000000000D5
+:10FB300000000000000000000000000000000000C5
+:10FB400000000000000000000000000000000000B5
+:10FB500000000000000000000000000000000000A5
+:10FB60000000000000000000000000000000000095
+:10FB70000000000000000000000000000000000085
+:10FB80000000000000000000000000000000000075
+:10FB90000000000000000000000000000000000065
+:10FBA0000000000000000000000000000000000055
+:10FBB0000000000000000000000000000000000045
+:10FBC0000000000000000000000000000000000035
+:10FBD0000000000000000000000000000000000025
+:10FBE0000000000000000000000000000000000015
+:10FBF0000000000000000000000000000000000005
+:10F8000055AA0DF080002A540215808180808080E6
+:10F810008080808080808080008000000000000068
+:10F82000408040C020C03030905010F010101010B8
+:10F830001010101010101010F010101010101010E8
+:10F8400010101010D09050D0505050505050505078
+:10F8500050505050D0D0D0D0D0D0109010101010A8
+:10F86000101000E002000502050508080808080855
+:10F87000080808080808080805080505050507051B
+:10F880001008101F201F62604850407F40404040D9
+:10F8900040404040404040407F4047404747424012
+:10F8A000424747405F4F505F50505050505050506B
+:10F8B000505050505F5F58585F58474F4740424044
+:10F8C0004040003F00000000000000000000000079
+:10F8D0000000000000000000000000000000000028
+:10F8E0000000000000000000000000000000000018
+:10F8F0000000000000000000000000000000000008
+:10F9000000000000000000000000000000000000F7
+:10F9100000000000000000000000000000000000E7
+:10F9200000000000000000000000000000000000D7
+:10F9300000000000000000000000000000000000C7
+:10F9400000000000000000000000000000000000B7
+:10F9500000000000000000000000000000000000A7
+:10F960000000000000000000000000000000000097
+:10F970000000000000000000000000000000000087
+:10F980000000000000000000000000000000000077
+:10F990000000000000000000000000000000000067
+:10F9A0000000000000000000000000000000000057
+:10F9B0000000000000000000000000000000000047
+:10F9C0000000000000000000000000000000000037
+:10F9D0000000000000000000000000000000000027
+:10F9E0000000000000000000000000000000000017
+:10F9F0000000000000000000000000000000000007
+:10FA000000000000000000000000000000000000F6
+:10FA100000000000000000000000000000000000E6
+:10FA200000000000000000000000000000000000D6
+:10FA300000000000000000000000000000000000C6
+:10FA400000000000000000000000000000000000B6
+:10FA500000000000000000000000000000000000A6
+:10FA60000000000000000000000000000000000096
+:10FA70000000000000000000000000000000000086
+:10FA80000000000000000000000000000000000076
+:10FA90000000000000000000000000000000000066
+:10FAA0000000000000000000000000000000000056
+:10FAB0000000000000000000000000000000000046
+:10FAC0000000000000000000000000000000000036
+:10FAD0000000000000000000000000000000000026
+:10FAE0000000000000000000000000000000000016
+:10FAF0000000000000000000000000000000000006
+:10FB000000000000000000000000000000000000F5
+:10FB100000000000000000000000000000000000E5
+:10FB200000000000000000000000000000000000D5
+:10FB300000000000000000000000000000000000C5
+:10FB400000000000000000000000000000000000B5
+:10FB500000000000000000000000000000000000A5
+:10FB60000000000000000000000000000000000095
+:10FB70000000000000000000000000000000000085
+:10FB80000000000000000000000000000000000075
+:10FB90000000000000000000000000000000000065
+:10FBA0000000000000000000000000000000000055
+:10FBB0000000000000000000000000000000000045
+:10FBC0000000000000000000000000000000000035
+:10FBD0000000000000000000000000000000000025
+:10FBE0000000000000000000000000000000000015
+:10FBF0000000000000000000000000000000000005
+:10F8000055AA0DF080002A540215808180808080E6
+:10F810008080808080808080008000000000000068
+:10F82000408040C020C03030905010F010101010B8
+:10F830001010101010101010F010101010101010E8
+:10F8400010101010D09050D0505050505050505078
+:10F8500050505050D0D0D0D0D0D0109010101010A8
+:10F86000101000E002000502050508080808080855
+:10F87000080808080808080805080505050507051B
+:10F880001008101F201F62604850407F40404040D9
+:10F8900040404040404040407F4047404747424012
+:10F8A000424747405F4F505F50505050505050506B
+:10F8B000505050505F5F58585F58474F4740424044
+:10F8C0004040003F00000000000000000000000079
+:10F8D0000000000000000000000000000000000028
+:10F8E0000000000000000000000000000000000018
+:10F8F0000000000000000000000000000000000008
+:10F9000000000000000000000000000000000000F7
+:10F9100000000000000000000000000000000000E7
+:10F9200000000000000000000000000000000000D7
+:10F9300000000000000000000000000000000000C7
+:10F9400000000000000000000000000000000000B7
+:10F9500000000000000000000000000000000000A7
+:10F960000000000000000000000000000000000097
+:10F970000000000000000000000000000000000087
+:10F980000000000000000000000000000000000077
+:10F990000000000000000000000000000000000067
+:10F9A0000000000000000000000000000000000057
+:10F9B0000000000000000000000000000000000047
+:10F9C0000000000000000000000000000000000037
+:10F9D0000000000000000000000000000000000027
+:10F9E0000000000000000000000000000000000017
+:10F9F0000000000000000000000000000000000007
+:10FA000000000000000000000000000000000000F6
+:10FA100000000000000000000000000000000000E6
+:10FA200000000000000000000000000000000000D6
+:10FA300000000000000000000000000000000000C6
+:10FA400000000000000000000000000000000000B6
+:10FA500000000000000000000000000000000000A6
+:10FA60000000000000000000000000000000000096
+:10FA70000000000000000000000000000000000086
+:10FA80000000000000000000000000000000000076
+:10FA90000000000000000000000000000000000066
+:10FAA0000000000000000000000000000000000056
+:10FAB0000000000000000000000000000000000046
+:10FAC0000000000000000000000000000000000036
+:10FAD0000000000000000000000000000000000026
+:10FAE0000000000000000000000000000000000016
+:10FAF0000000000000000000000000000000000006
+:10FB000000000000000000000000000000000000F5
+:10FB100000000000000000000000000000000000E5
+:10FB200000000000000000000000000000000000D5
+:10FB300000000000000000000000000000000000C5
+:10FB400000000000000000000000000000000000B5
+:10FB500000000000000000000000000000000000A5
+:10FB60000000000000000000000000000000000095
+:10FB70000000000000000000000000000000000085
+:10FB80000000000000000000000000000000000075
+:10FB90000000000000000000000000000000000065
+:10FBA0000000000000000000000000000000000055
+:10FBB0000000000000000000000000000000000045
+:10FBC0000000000000000000000000000000000035
+:10FBD0000000000000000000000000000000000025
+:10FBE0000000000000000000000000000000000015
+:10FBF0000000000000000000000000000000000005
+:00000001FF

Bootup Logo/Logos/001_TS100.hex

@@ -0,0 +1,258 @@
+:020000040800F2
+:10F8000055AA0DF080002A54821580818080808066
+:10F8100080808080808080808080808000000000E8
+:10F82000000000004080402020C020201010080868
+:10F8300008080C080C0C0C0C080808080C0C0C0C24
+:10F84000E80CA8A8A828E8A8C808A828A8A848A834
+:10F850008808284808E828C828A80CCC28CC28A85C
+:10F8600008C800F80200050208050808080808088A
+:10F8700008080A080A090A090A0908090505050508
+:10F880000505050510081020201F4040404020407D
+:10F890002020202020202020202020202020202068
+:10F8A00020202F202F28202025202A2A2A2A2728F6
+:10F8B0002120282F202F2827282B20272827282BD6
+:10F8C0002027001F000000000000000000000000D2
+:10F8D0000000000000000000000000000000000028
+:10F8E0000000000000000000000000000000000018
+:10F8F0000000000000000000000000000000000008
+:10F9000000000000000000000000000000000000F7
+:10F9100000000000000000000000000000000000E7
+:10F9200000000000000000000000000000000000D7
+:10F9300000000000000000000000000000000000C7
+:10F9400000000000000000000000000000000000B7
+:10F9500000000000000000000000000000000000A7
+:10F960000000000000000000000000000000000097
+:10F970000000000000000000000000000000000087
+:10F980000000000000000000000000000000000077
+:10F990000000000000000000000000000000000067
+:10F9A0000000000000000000000000000000000057
+:10F9B0000000000000000000000000000000000047
+:10F9C0000000000000000000000000000000000037
+:10F9D0000000000000000000000000000000000027
+:10F9E0000000000000000000000000000000000017
+:10F9F0000000000000000000000000000000000007
+:10FA000000000000000000000000000000000000F6
+:10FA100000000000000000000000000000000000E6
+:10FA200000000000000000000000000000000000D6
+:10FA300000000000000000000000000000000000C6
+:10FA400000000000000000000000000000000000B6
+:10FA500000000000000000000000000000000000A6
+:10FA60000000000000000000000000000000000096
+:10FA70000000000000000000000000000000000086
+:10FA80000000000000000000000000000000000076
+:10FA90000000000000000000000000000000000066
+:10FAA0000000000000000000000000000000000056
+:10FAB0000000000000000000000000000000000046
+:10FAC0000000000000000000000000000000000036
+:10FAD0000000000000000000000000000000000026
+:10FAE0000000000000000000000000000000000016
+:10FAF0000000000000000000000000000000000006
+:10FB000000000000000000000000000000000000F5
+:10FB100000000000000000000000000000000000E5
+:10FB200000000000000000000000000000000000D5
+:10FB300000000000000000000000000000000000C5
+:10FB400000000000000000000000000000000000B5
+:10FB500000000000000000000000000000000000A5
+:10FB60000000000000000000000000000000000095
+:10FB70000000000000000000000000000000000085
+:10FB80000000000000000000000000000000000075
+:10FB90000000000000000000000000000000000065
+:10FBA0000000000000000000000000000000000055
+:10FBB0000000000000000000000000000000000045
+:10FBC0000000000000000000000000000000000035
+:10FBD0000000000000000000000000000000000025
+:10FBE0000000000000000000000000000000000015
+:10FBF0000000000000000000000000000000000005
+:10F8000055AA0DF080002A54821580818080808066
+:10F8100080808080808080808080808000000000E8
+:10F82000000000004080402020C020201010080868
+:10F8300008080C080C0C0C0C080808080C0C0C0C24
+:10F84000E80CA8A8A828E8A8C808A828A8A848A834
+:10F850008808284808E828C828A80CCC28CC28A85C
+:10F8600008C800F80200050208050808080808088A
+:10F8700008080A080A090A090A0908090505050508
+:10F880000505050510081020201F4040404020407D
+:10F890002020202020202020202020202020202068
+:10F8A00020202F202F28202025202A2A2A2A2728F6
+:10F8B0002120282F202F2827282B20272827282BD6
+:10F8C0002027001F000000000000000000000000D2
+:10F8D0000000000000000000000000000000000028
+:10F8E0000000000000000000000000000000000018
+:10F8F0000000000000000000000000000000000008
+:10F9000000000000000000000000000000000000F7
+:10F9100000000000000000000000000000000000E7
+:10F9200000000000000000000000000000000000D7
+:10F9300000000000000000000000000000000000C7
+:10F9400000000000000000000000000000000000B7
+:10F9500000000000000000000000000000000000A7
+:10F960000000000000000000000000000000000097
+:10F970000000000000000000000000000000000087
+:10F980000000000000000000000000000000000077
+:10F990000000000000000000000000000000000067
+:10F9A0000000000000000000000000000000000057
+:10F9B0000000000000000000000000000000000047
+:10F9C0000000000000000000000000000000000037
+:10F9D0000000000000000000000000000000000027
+:10F9E0000000000000000000000000000000000017
+:10F9F0000000000000000000000000000000000007
+:10FA000000000000000000000000000000000000F6
+:10FA100000000000000000000000000000000000E6
+:10FA200000000000000000000000000000000000D6
+:10FA300000000000000000000000000000000000C6
+:10FA400000000000000000000000000000000000B6
+:10FA500000000000000000000000000000000000A6
+:10FA60000000000000000000000000000000000096
+:10FA70000000000000000000000000000000000086
+:10FA80000000000000000000000000000000000076
+:10FA90000000000000000000000000000000000066
+:10FAA0000000000000000000000000000000000056
+:10FAB0000000000000000000000000000000000046
+:10FAC0000000000000000000000000000000000036
+:10FAD0000000000000000000000000000000000026
+:10FAE0000000000000000000000000000000000016
+:10FAF0000000000000000000000000000000000006
+:10FB000000000000000000000000000000000000F5
+:10FB100000000000000000000000000000000000E5
+:10FB200000000000000000000000000000000000D5
+:10FB300000000000000000000000000000000000C5
+:10FB400000000000000000000000000000000000B5
+:10FB500000000000000000000000000000000000A5
+:10FB60000000000000000000000000000000000095
+:10FB70000000000000000000000000000000000085
+:10FB80000000000000000000000000000000000075
+:10FB90000000000000000000000000000000000065
+:10FBA0000000000000000000000000000000000055
+:10FBB0000000000000000000000000000000000045
+:10FBC0000000000000000000000000000000000035
+:10FBD0000000000000000000000000000000000025
+:10FBE0000000000000000000000000000000000015
+:10FBF0000000000000000000000000000000000005
+:10F8000055AA0DF080002A54821580818080808066
+:10F8100080808080808080808080808000000000E8
+:10F82000000000004080402020C020201010080868
+:10F8300008080C080C0C0C0C080808080C0C0C0C24
+:10F84000E80CA8A8A828E8A8C808A828A8A848A834
+:10F850008808284808E828C828A80CCC28CC28A85C
+:10F8600008C800F80200050208050808080808088A
+:10F8700008080A080A090A090A0908090505050508
+:10F880000505050510081020201F4040404020407D
+:10F890002020202020202020202020202020202068
+:10F8A00020202F202F28202025202A2A2A2A2728F6
+:10F8B0002120282F202F2827282B20272827282BD6
+:10F8C0002027001F000000000000000000000000D2
+:10F8D0000000000000000000000000000000000028
+:10F8E0000000000000000000000000000000000018
+:10F8F0000000000000000000000000000000000008
+:10F9000000000000000000000000000000000000F7
+:10F9100000000000000000000000000000000000E7
+:10F9200000000000000000000000000000000000D7
+:10F9300000000000000000000000000000000000C7
+:10F9400000000000000000000000000000000000B7
+:10F9500000000000000000000000000000000000A7
+:10F960000000000000000000000000000000000097
+:10F970000000000000000000000000000000000087
+:10F980000000000000000000000000000000000077
+:10F990000000000000000000000000000000000067
+:10F9A0000000000000000000000000000000000057
+:10F9B0000000000000000000000000000000000047
+:10F9C0000000000000000000000000000000000037
+:10F9D0000000000000000000000000000000000027
+:10F9E0000000000000000000000000000000000017
+:10F9F0000000000000000000000000000000000007
+:10FA000000000000000000000000000000000000F6
+:10FA100000000000000000000000000000000000E6
+:10FA200000000000000000000000000000000000D6
+:10FA300000000000000000000000000000000000C6
+:10FA400000000000000000000000000000000000B6
+:10FA500000000000000000000000000000000000A6
+:10FA60000000000000000000000000000000000096
+:10FA70000000000000000000000000000000000086
+:10FA80000000000000000000000000000000000076
+:10FA90000000000000000000000000000000000066
+:10FAA0000000000000000000000000000000000056
+:10FAB0000000000000000000000000000000000046
+:10FAC0000000000000000000000000000000000036
+:10FAD0000000000000000000000000000000000026
+:10FAE0000000000000000000000000000000000016
+:10FAF0000000000000000000000000000000000006
+:10FB000000000000000000000000000000000000F5
+:10FB100000000000000000000000000000000000E5
+:10FB200000000000000000000000000000000000D5
+:10FB300000000000000000000000000000000000C5
+:10FB400000000000000000000000000000000000B5
+:10FB500000000000000000000000000000000000A5
+:10FB60000000000000000000000000000000000095
+:10FB70000000000000000000000000000000000085
+:10FB80000000000000000000000000000000000075
+:10FB90000000000000000000000000000000000065
+:10FBA0000000000000000000000000000000000055
+:10FBB0000000000000000000000000000000000045
+:10FBC0000000000000000000000000000000000035
+:10FBD0000000000000000000000000000000000025
+:10FBE0000000000000000000000000000000000015
+:10FBF0000000000000000000000000000000000005
+:10F8000055AA0DF080002A54821580818080808066
+:10F8100080808080808080808080808000000000E8
+:10F82000000000004080402020C020201010080868
+:10F8300008080C080C0C0C0C080808080C0C0C0C24
+:10F84000E80CA8A8A828E8A8C808A828A8A848A834
+:10F850008808284808E828C828A80CCC28CC28A85C
+:10F8600008C800F80200050208050808080808088A
+:10F8700008080A080A090A090A0908090505050508
+:10F880000505050510081020201F4040404020407D
+:10F890002020202020202020202020202020202068
+:10F8A00020202F202F28202025202A2A2A2A2728F6
+:10F8B0002120282F202F2827282B20272827282BD6
+:10F8C0002027001F000000000000000000000000D2
+:10F8D0000000000000000000000000000000000028
+:10F8E0000000000000000000000000000000000018
+:10F8F0000000000000000000000000000000000008
+:10F9000000000000000000000000000000000000F7
+:10F9100000000000000000000000000000000000E7
+:10F9200000000000000000000000000000000000D7
+:10F9300000000000000000000000000000000000C7
+:10F9400000000000000000000000000000000000B7
+:10F9500000000000000000000000000000000000A7
+:10F960000000000000000000000000000000000097
+:10F970000000000000000000000000000000000087
+:10F980000000000000000000000000000000000077
+:10F990000000000000000000000000000000000067
+:10F9A0000000000000000000000000000000000057
+:10F9B0000000000000000000000000000000000047
+:10F9C0000000000000000000000000000000000037
+:10F9D0000000000000000000000000000000000027
+:10F9E0000000000000000000000000000000000017
+:10F9F0000000000000000000000000000000000007
+:10FA000000000000000000000000000000000000F6
+:10FA100000000000000000000000000000000000E6
+:10FA200000000000000000000000000000000000D6
+:10FA300000000000000000000000000000000000C6
+:10FA400000000000000000000000000000000000B6
+:10FA500000000000000000000000000000000000A6
+:10FA60000000000000000000000000000000000096
+:10FA70000000000000000000000000000000000086
+:10FA80000000000000000000000000000000000076
+:10FA90000000000000000000000000000000000066
+:10FAA0000000000000000000000000000000000056
+:10FAB0000000000000000000000000000000000046
+:10FAC0000000000000000000000000000000000036
+:10FAD0000000000000000000000000000000000026
+:10FAE0000000000000000000000000000000000016
+:10FAF0000000000000000000000000000000000006
+:10FB000000000000000000000000000000000000F5
+:10FB100000000000000000000000000000000000E5
+:10FB200000000000000000000000000000000000D5
+:10FB300000000000000000000000000000000000C5
+:10FB400000000000000000000000000000000000B5
+:10FB500000000000000000000000000000000000A5
+:10FB60000000000000000000000000000000000095
+:10FB70000000000000000000000000000000000085
+:10FB80000000000000000000000000000000000075
+:10FB90000000000000000000000000000000000065
+:10FBA0000000000000000000000000000000000055
+:10FBB0000000000000000000000000000000000045
+:10FBC0000000000000000000000000000000000035
+:10FBD0000000000000000000000000000000000025
+:10FBE0000000000000000000000000000000000015
+:10FBF0000000000000000000000000000000000005
+:00000001FF

Bootup Logo/Logos/001_TS100_Left.hex

@@ -0,0 +1,258 @@
+:020000040800F2
+:10F8000055AA0DF0F800E808A8A8AC28ECACC80888
+:10F81000A828A8A848A88808284808E828C828A828
+:10F8200008C828C828A80CC80C0C0C0C0808080824
+:10F830000C0C0C0C080C0808080810102020C02024
+:10F840002040804000000000000000008080808098
+:10F850008080808080808080808080808180158210
+:10F86000542A00801F0020202F202F282020252010
+:10F870002A2A2A2A27282120282F202F2827282B08
+:10F8800020272827282B2027202020202020202048
+:10F8900020202020202020204020404040401F20C9
+:10F8A0002010081005050505050505050908090AC4
+:10F8B000090A090A080A08080808080808080508C3
+:10F8C000020500020000000000000000000000002F
+:10F8D0000000000000000000000000000000000028
+:10F8E0000000000000000000000000000000000018
+:10F8F0000000000000000000000000000000000008
+:10F9000000000000000000000000000000000000F7
+:10F9100000000000000000000000000000000000E7
+:10F9200000000000000000000000000000000000D7
+:10F9300000000000000000000000000000000000C7
+:10F9400000000000000000000000000000000000B7
+:10F9500000000000000000000000000000000000A7
+:10F960000000000000000000000000000000000097
+:10F970000000000000000000000000000000000087
+:10F980000000000000000000000000000000000077
+:10F990000000000000000000000000000000000067
+:10F9A0000000000000000000000000000000000057
+:10F9B0000000000000000000000000000000000047
+:10F9C0000000000000000000000000000000000037
+:10F9D0000000000000000000000000000000000027
+:10F9E0000000000000000000000000000000000017
+:10F9F0000000000000000000000000000000000007
+:10FA000000000000000000000000000000000000F6
+:10FA100000000000000000000000000000000000E6
+:10FA200000000000000000000000000000000000D6
+:10FA300000000000000000000000000000000000C6
+:10FA400000000000000000000000000000000000B6
+:10FA500000000000000000000000000000000000A6
+:10FA60000000000000000000000000000000000096
+:10FA70000000000000000000000000000000000086
+:10FA80000000000000000000000000000000000076
+:10FA90000000000000000000000000000000000066
+:10FAA0000000000000000000000000000000000056
+:10FAB0000000000000000000000000000000000046
+:10FAC0000000000000000000000000000000000036
+:10FAD0000000000000000000000000000000000026
+:10FAE0000000000000000000000000000000000016
+:10FAF0000000000000000000000000000000000006
+:10FB000000000000000000000000000000000000F5
+:10FB100000000000000000000000000000000000E5
+:10FB200000000000000000000000000000000000D5
+:10FB300000000000000000000000000000000000C5
+:10FB400000000000000000000000000000000000B5
+:10FB500000000000000000000000000000000000A5
+:10FB60000000000000000000000000000000000095
+:10FB70000000000000000000000000000000000085
+:10FB80000000000000000000000000000000000075
+:10FB90000000000000000000000000000000000065
+:10FBA0000000000000000000000000000000000055
+:10FBB0000000000000000000000000000000000045
+:10FBC0000000000000000000000000000000000035
+:10FBD0000000000000000000000000000000000025
+:10FBE0000000000000000000000000000000000015
+:10FBF0000000000000000000000000000000000005
+:10F8000055AA0DF0F800E808A8A8AC28ECACC80888
+:10F81000A828A8A848A88808284808E828C828A828
+:10F8200008C828C828A80CC80C0C0C0C0808080824
+:10F830000C0C0C0C080C0808080810102020C02024
+:10F840002040804000000000000000008080808098
+:10F850008080808080808080808080808180158210
+:10F86000542A00801F0020202F202F282020252010
+:10F870002A2A2A2A27282120282F202F2827282B08
+:10F8800020272827282B2027202020202020202048
+:10F8900020202020202020204020404040401F20C9
+:10F8A0002010081005050505050505050908090AC4
+:10F8B000090A090A080A08080808080808080508C3
+:10F8C000020500020000000000000000000000002F
+:10F8D0000000000000000000000000000000000028
+:10F8E0000000000000000000000000000000000018
+:10F8F0000000000000000000000000000000000008
+:10F9000000000000000000000000000000000000F7
+:10F9100000000000000000000000000000000000E7
+:10F9200000000000000000000000000000000000D7
+:10F9300000000000000000000000000000000000C7
+:10F9400000000000000000000000000000000000B7
+:10F9500000000000000000000000000000000000A7
+:10F960000000000000000000000000000000000097
+:10F970000000000000000000000000000000000087
+:10F980000000000000000000000000000000000077
+:10F990000000000000000000000000000000000067
+:10F9A0000000000000000000000000000000000057
+:10F9B0000000000000000000000000000000000047
+:10F9C0000000000000000000000000000000000037
+:10F9D0000000000000000000000000000000000027
+:10F9E0000000000000000000000000000000000017
+:10F9F0000000000000000000000000000000000007
+:10FA000000000000000000000000000000000000F6
+:10FA100000000000000000000000000000000000E6
+:10FA200000000000000000000000000000000000D6
+:10FA300000000000000000000000000000000000C6
+:10FA400000000000000000000000000000000000B6
+:10FA500000000000000000000000000000000000A6
+:10FA60000000000000000000000000000000000096
+:10FA70000000000000000000000000000000000086
+:10FA80000000000000000000000000000000000076
+:10FA90000000000000000000000000000000000066
+:10FAA0000000000000000000000000000000000056
+:10FAB0000000000000000000000000000000000046
+:10FAC0000000000000000000000000000000000036
+:10FAD0000000000000000000000000000000000026
+:10FAE0000000000000000000000000000000000016
+:10FAF0000000000000000000000000000000000006
+:10FB000000000000000000000000000000000000F5
+:10FB100000000000000000000000000000000000E5
+:10FB200000000000000000000000000000000000D5
+:10FB300000000000000000000000000000000000C5
+:10FB400000000000000000000000000000000000B5
+:10FB500000000000000000000000000000000000A5
+:10FB60000000000000000000000000000000000095
+:10FB70000000000000000000000000000000000085
+:10FB80000000000000000000000000000000000075
+:10FB90000000000000000000000000000000000065
+:10FBA0000000000000000000000000000000000055
+:10FBB0000000000000000000000000000000000045
+:10FBC0000000000000000000000000000000000035
+:10FBD0000000000000000000000000000000000025
+:10FBE0000000000000000000000000000000000015
+:10FBF0000000000000000000000000000000000005
+:10F8000055AA0DF0F800E808A8A8AC28ECACC80888
+:10F81000A828A8A848A88808284808E828C828A828
+:10F8200008C828C828A80CC80C0C0C0C0808080824
+:10F830000C0C0C0C080C0808080810102020C02024
+:10F840002040804000000000000000008080808098
+:10F850008080808080808080808080808180158210
+:10F86000542A00801F0020202F202F282020252010
+:10F870002A2A2A2A27282120282F202F2827282B08
+:10F8800020272827282B2027202020202020202048
+:10F8900020202020202020204020404040401F20C9
+:10F8A0002010081005050505050505050908090AC4
+:10F8B000090A090A080A08080808080808080508C3
+:10F8C000020500020000000000000000000000002F
+:10F8D0000000000000000000000000000000000028
+:10F8E0000000000000000000000000000000000018
+:10F8F0000000000000000000000000000000000008
+:10F9000000000000000000000000000000000000F7
+:10F9100000000000000000000000000000000000E7
+:10F9200000000000000000000000000000000000D7
+:10F9300000000000000000000000000000000000C7
+:10F9400000000000000000000000000000000000B7
+:10F9500000000000000000000000000000000000A7
+:10F960000000000000000000000000000000000097
+:10F970000000000000000000000000000000000087
+:10F980000000000000000000000000000000000077
+:10F990000000000000000000000000000000000067
+:10F9A0000000000000000000000000000000000057
+:10F9B0000000000000000000000000000000000047
+:10F9C0000000000000000000000000000000000037
+:10F9D0000000000000000000000000000000000027
+:10F9E0000000000000000000000000000000000017
+:10F9F0000000000000000000000000000000000007
+:10FA000000000000000000000000000000000000F6
+:10FA100000000000000000000000000000000000E6
+:10FA200000000000000000000000000000000000D6
+:10FA300000000000000000000000000000000000C6
+:10FA400000000000000000000000000000000000B6
+:10FA500000000000000000000000000000000000A6
+:10FA60000000000000000000000000000000000096
+:10FA70000000000000000000000000000000000086
+:10FA80000000000000000000000000000000000076
+:10FA90000000000000000000000000000000000066
+:10FAA0000000000000000000000000000000000056
+:10FAB0000000000000000000000000000000000046
+:10FAC0000000000000000000000000000000000036
+:10FAD0000000000000000000000000000000000026
+:10FAE0000000000000000000000000000000000016
+:10FAF0000000000000000000000000000000000006
+:10FB000000000000000000000000000000000000F5
+:10FB100000000000000000000000000000000000E5
+:10FB200000000000000000000000000000000000D5
+:10FB300000000000000000000000000000000000C5
+:10FB400000000000000000000000000000000000B5
+:10FB500000000000000000000000000000000000A5
+:10FB60000000000000000000000000000000000095
+:10FB70000000000000000000000000000000000085
+:10FB80000000000000000000000000000000000075
+:10FB90000000000000000000000000000000000065
+:10FBA0000000000000000000000000000000000055
+:10FBB0000000000000000000000000000000000045
+:10FBC0000000000000000000000000000000000035
+:10FBD0000000000000000000000000000000000025
+:10FBE0000000000000000000000000000000000015
+:10FBF0000000000000000000000000000000000005
+:10F8000055AA0DF0F800E808A8A8AC28ECACC80888
+:10F81000A828A8A848A88808284808E828C828A828
+:10F8200008C828C828A80CC80C0C0C0C0808080824
+:10F830000C0C0C0C080C0808080810102020C02024
+:10F840002040804000000000000000008080808098
+:10F850008080808080808080808080808180158210
+:10F86000542A00801F0020202F202F282020252010
+:10F870002A2A2A2A27282120282F202F2827282B08
+:10F8800020272827282B2027202020202020202048
+:10F8900020202020202020204020404040401F20C9
+:10F8A0002010081005050505050505050908090AC4
+:10F8B000090A090A080A08080808080808080508C3
+:10F8C000020500020000000000000000000000002F
+:10F8D0000000000000000000000000000000000028
+:10F8E0000000000000000000000000000000000018
+:10F8F0000000000000000000000000000000000008
+:10F9000000000000000000000000000000000000F7
+:10F9100000000000000000000000000000000000E7
+:10F9200000000000000000000000000000000000D7
+:10F9300000000000000000000000000000000000C7
+:10F9400000000000000000000000000000000000B7
+:10F9500000000000000000000000000000000000A7
+:10F960000000000000000000000000000000000097
+:10F970000000000000000000000000000000000087
+:10F980000000000000000000000000000000000077
+:10F990000000000000000000000000000000000067
+:10F9A0000000000000000000000000000000000057
+:10F9B0000000000000000000000000000000000047
+:10F9C0000000000000000000000000000000000037
+:10F9D0000000000000000000000000000000000027
+:10F9E0000000000000000000000000000000000017
+:10F9F0000000000000000000000000000000000007
+:10FA000000000000000000000000000000000000F6
+:10FA100000000000000000000000000000000000E6
+:10FA200000000000000000000000000000000000D6
+:10FA300000000000000000000000000000000000C6
+:10FA400000000000000000000000000000000000B6
+:10FA500000000000000000000000000000000000A6
+:10FA60000000000000000000000000000000000096
+:10FA70000000000000000000000000000000000086
+:10FA80000000000000000000000000000000000076
+:10FA90000000000000000000000000000000000066
+:10FAA0000000000000000000000000000000000056
+:10FAB0000000000000000000000000000000000046
+:10FAC0000000000000000000000000000000000036
+:10FAD0000000000000000000000000000000000026
+:10FAE0000000000000000000000000000000000016
+:10FAF0000000000000000000000000000000000006
+:10FB000000000000000000000000000000000000F5
+:10FB100000000000000000000000000000000000E5
+:10FB200000000000000000000000000000000000D5
+:10FB300000000000000000000000000000000000C5
+:10FB400000000000000000000000000000000000B5
+:10FB500000000000000000000000000000000000A5
+:10FB60000000000000000000000000000000000095
+:10FB70000000000000000000000000000000000085
+:10FB80000000000000000000000000000000000075
+:10FB90000000000000000000000000000000000065
+:10FBA0000000000000000000000000000000000055
+:10FBB0000000000000000000000000000000000045
+:10FBC0000000000000000000000000000000000035
+:10FBD0000000000000000000000000000000000025
+:10FBE0000000000000000000000000000000000015
+:10FBF0000000000000000000000000000000000005
+:00000001FF

Bootup Logo/Logos/001_TS80.hex

@@ -0,0 +1,258 @@
+:020000040800F2
+:10F8000055AA0DF07FFFD5AB7DEA7F7E7F7FFF7F1E
+:10F81000FFFFFFFFFFFFFFFFFFFFFFFFFFFF7FFF78
+:10F820007F7FBFBFDFBFEFDF0FEFEF0FAFAFAFAF38
+:10F83000EFEFAFAFAFAFAFAF0FEF6FEFAFAFAFAFB8
+:10F84000AFAF2FAFAFAFAFAFAFAF6FAF6FEFAFAF88
+:10F85000AFAFAFAFAFAFAFAFAFAFAFAFAFAFAFAFB8
+:10F86000EF6FFF1FFDFFFAFDF7FAF7F7F7F7FAF76B
+:10F87000FAFAFAFAFAFAFAFAFAFAFAFAFAFAF0FAF2
+:10F88000F7F7EFEFDFEFBFDF80BFBF80AAAAAAAA1A
+:10F89000BFBFAAAAAAAAAAAA80BFB0BFADAFAAAA90
+:10F8A000ADAFA2AAADAAAAAFADAAB0AFB0BFAFAF7D
+:10F8B000AFAFAFAFAFAFAFAFAFAFAFAFAFAFAFAF58
+:10F8C000BFB0FFC00000000000000000000000000A
+:10F8D0000000000000000000000000000000000028
+:10F8E0000000000000000000000000000000000018
+:10F8F0000000000000000000000000000000000008
+:10F9000000000000000000000000000000000000F7
+:10F9100000000000000000000000000000000000E7
+:10F9200000000000000000000000000000000000D7
+:10F9300000000000000000000000000000000000C7
+:10F9400000000000000000000000000000000000B7
+:10F9500000000000000000000000000000000000A7
+:10F960000000000000000000000000000000000097
+:10F970000000000000000000000000000000000087
+:10F980000000000000000000000000000000000077
+:10F990000000000000000000000000000000000067
+:10F9A0000000000000000000000000000000000057
+:10F9B0000000000000000000000000000000000047
+:10F9C0000000000000000000000000000000000037
+:10F9D0000000000000000000000000000000000027
+:10F9E0000000000000000000000000000000000017
+:10F9F0000000000000000000000000000000000007
+:10FA000000000000000000000000000000000000F6
+:10FA100000000000000000000000000000000000E6
+:10FA200000000000000000000000000000000000D6
+:10FA300000000000000000000000000000000000C6
+:10FA400000000000000000000000000000000000B6
+:10FA500000000000000000000000000000000000A6
+:10FA60000000000000000000000000000000000096
+:10FA70000000000000000000000000000000000086
+:10FA80000000000000000000000000000000000076
+:10FA90000000000000000000000000000000000066
+:10FAA0000000000000000000000000000000000056
+:10FAB0000000000000000000000000000000000046
+:10FAC0000000000000000000000000000000000036
+:10FAD0000000000000000000000000000000000026
+:10FAE0000000000000000000000000000000000016
+:10FAF0000000000000000000000000000000000006
+:10FB000000000000000000000000000000000000F5
+:10FB100000000000000000000000000000000000E5
+:10FB200000000000000000000000000000000000D5
+:10FB300000000000000000000000000000000000C5
+:10FB400000000000000000000000000000000000B5
+:10FB500000000000000000000000000000000000A5
+:10FB60000000000000000000000000000000000095
+:10FB70000000000000000000000000000000000085
+:10FB80000000000000000000000000000000000075
+:10FB90000000000000000000000000000000000065
+:10FBA0000000000000000000000000000000000055
+:10FBB0000000000000000000000000000000000045
+:10FBC0000000000000000000000000000000000035
+:10FBD0000000000000000000000000000000000025
+:10FBE0000000000000000000000000000000000015
+:10FBF0000000000000000000000000000000000005
+:10F8000055AA0DF07FFFD5AB7DEA7F7E7F7FFF7F1E
+:10F81000FFFFFFFFFFFFFFFFFFFFFFFFFFFF7FFF78
+:10F820007F7FBFBFDFBFEFDF0FEFEF0FAFAFAFAF38
+:10F83000EFEFAFAFAFAFAFAF0FEF6FEFAFAFAFAFB8
+:10F84000AFAF2FAFAFAFAFAFAFAF6FAF6FEFAFAF88
+:10F85000AFAFAFAFAFAFAFAFAFAFAFAFAFAFAFAFB8
+:10F86000EF6FFF1FFDFFFAFDF7FAF7F7F7F7FAF76B
+:10F87000FAFAFAFAFAFAFAFAFAFAFAFAFAFAF0FAF2
+:10F88000F7F7EFEFDFEFBFDF80BFBF80AAAAAAAA1A
+:10F89000BFBFAAAAAAAAAAAA80BFB0BFADAFAAAA90
+:10F8A000ADAFA2AAADAAAAAFADAAB0AFB0BFAFAF7D
+:10F8B000AFAFAFAFAFAFAFAFAFAFAFAFAFAFAFAF58
+:10F8C000BFB0FFC00000000000000000000000000A
+:10F8D0000000000000000000000000000000000028
+:10F8E0000000000000000000000000000000000018
+:10F8F0000000000000000000000000000000000008
+:10F9000000000000000000000000000000000000F7
+:10F9100000000000000000000000000000000000E7
+:10F9200000000000000000000000000000000000D7
+:10F9300000000000000000000000000000000000C7
+:10F9400000000000000000000000000000000000B7
+:10F9500000000000000000000000000000000000A7
+:10F960000000000000000000000000000000000097
+:10F970000000000000000000000000000000000087
+:10F980000000000000000000000000000000000077
+:10F990000000000000000000000000000000000067
+:10F9A0000000000000000000000000000000000057
+:10F9B0000000000000000000000000000000000047
+:10F9C0000000000000000000000000000000000037
+:10F9D0000000000000000000000000000000000027
+:10F9E0000000000000000000000000000000000017
+:10F9F0000000000000000000000000000000000007
+:10FA000000000000000000000000000000000000F6
+:10FA100000000000000000000000000000000000E6
+:10FA200000000000000000000000000000000000D6
+:10FA300000000000000000000000000000000000C6
+:10FA400000000000000000000000000000000000B6
+:10FA500000000000000000000000000000000000A6
+:10FA60000000000000000000000000000000000096
+:10FA70000000000000000000000000000000000086
+:10FA80000000000000000000000000000000000076
+:10FA90000000000000000000000000000000000066
+:10FAA0000000000000000000000000000000000056
+:10FAB0000000000000000000000000000000000046
+:10FAC0000000000000000000000000000000000036
+:10FAD0000000000000000000000000000000000026
+:10FAE0000000000000000000000000000000000016
+:10FAF0000000000000000000000000000000000006
+:10FB000000000000000000000000000000000000F5
+:10FB100000000000000000000000000000000000E5
+:10FB200000000000000000000000000000000000D5
+:10FB300000000000000000000000000000000000C5
+:10FB400000000000000000000000000000000000B5
+:10FB500000000000000000000000000000000000A5
+:10FB60000000000000000000000000000000000095
+:10FB70000000000000000000000000000000000085
+:10FB80000000000000000000000000000000000075
+:10FB90000000000000000000000000000000000065
+:10FBA0000000000000000000000000000000000055
+:10FBB0000000000000000000000000000000000045
+:10FBC0000000000000000000000000000000000035
+:10FBD0000000000000000000000000000000000025
+:10FBE0000000000000000000000000000000000015
+:10FBF0000000000000000000000000000000000005
+:10F8000055AA0DF07FFFD5AB7DEA7F7E7F7FFF7F1E
+:10F81000FFFFFFFFFFFFFFFFFFFFFFFFFFFF7FFF78
+:10F820007F7FBFBFDFBFEFDF0FEFEF0FAFAFAFAF38
+:10F83000EFEFAFAFAFAFAFAF0FEF6FEFAFAFAFAFB8
+:10F84000AFAF2FAFAFAFAFAFAFAF6FAF6FEFAFAF88
+:10F85000AFAFAFAFAFAFAFAFAFAFAFAFAFAFAFAFB8
+:10F86000EF6FFF1FFDFFFAFDF7FAF7F7F7F7FAF76B
+:10F87000FAFAFAFAFAFAFAFAFAFAFAFAFAFAF0FAF2
+:10F88000F7F7EFEFDFEFBFDF80BFBF80AAAAAAAA1A
+:10F89000BFBFAAAAAAAAAAAA80BFB0BFADAFAAAA90
+:10F8A000ADAFA2AAADAAAAAFADAAB0AFB0BFAFAF7D
+:10F8B000AFAFAFAFAFAFAFAFAFAFAFAFAFAFAFAF58
+:10F8C000BFB0FFC00000000000000000000000000A
+:10F8D0000000000000000000000000000000000028
+:10F8E0000000000000000000000000000000000018
+:10F8F0000000000000000000000000000000000008
+:10F9000000000000000000000000000000000000F7
+:10F9100000000000000000000000000000000000E7
+:10F9200000000000000000000000000000000000D7
+:10F9300000000000000000000000000000000000C7
+:10F9400000000000000000000000000000000000B7
+:10F9500000000000000000000000000000000000A7
+:10F960000000000000000000000000000000000097
+:10F970000000000000000000000000000000000087
+:10F980000000000000000000000000000000000077
+:10F990000000000000000000000000000000000067
+:10F9A0000000000000000000000000000000000057
+:10F9B0000000000000000000000000000000000047
+:10F9C0000000000000000000000000000000000037
+:10F9D0000000000000000000000000000000000027
+:10F9E0000000000000000000000000000000000017
+:10F9F0000000000000000000000000000000000007
+:10FA000000000000000000000000000000000000F6
+:10FA100000000000000000000000000000000000E6
+:10FA200000000000000000000000000000000000D6
+:10FA300000000000000000000000000000000000C6
+:10FA400000000000000000000000000000000000B6
+:10FA500000000000000000000000000000000000A6
+:10FA60000000000000000000000000000000000096
+:10FA70000000000000000000000000000000000086
+:10FA80000000000000000000000000000000000076
+:10FA90000000000000000000000000000000000066
+:10FAA0000000000000000000000000000000000056
+:10FAB0000000000000000000000000000000000046
+:10FAC0000000000000000000000000000000000036
+:10FAD0000000000000000000000000000000000026
+:10FAE0000000000000000000000000000000000016
+:10FAF0000000000000000000000000000000000006
+:10FB000000000000000000000000000000000000F5
+:10FB100000000000000000000000000000000000E5
+:10FB200000000000000000000000000000000000D5
+:10FB300000000000000000000000000000000000C5
+:10FB400000000000000000000000000000000000B5
+:10FB500000000000000000000000000000000000A5
+:10FB60000000000000000000000000000000000095
+:10FB70000000000000000000000000000000000085
+:10FB80000000000000000000000000000000000075
+:10FB90000000000000000000000000000000000065
+:10FBA0000000000000000000000000000000000055
+:10FBB0000000000000000000000000000000000045
+:10FBC0000000000000000000000000000000000035
+:10FBD0000000000000000000000000000000000025
+:10FBE0000000000000000000000000000000000015
+:10FBF0000000000000000000000000000000000005
+:10F8000055AA0DF07FFFD5AB7DEA7F7E7F7FFF7F1E
+:10F81000FFFFFFFFFFFFFFFFFFFFFFFFFFFF7FFF78
+:10F820007F7FBFBFDFBFEFDF0FEFEF0FAFAFAFAF38
+:10F83000EFEFAFAFAFAFAFAF0FEF6FEFAFAFAFAFB8
+:10F84000AFAF2FAFAFAFAFAFAFAF6FAF6FEFAFAF88
+:10F85000AFAFAFAFAFAFAFAFAFAFAFAFAFAFAFAFB8
+:10F86000EF6FFF1FFDFFFAFDF7FAF7F7F7F7FAF76B
+:10F87000FAFAFAFAFAFAFAFAFAFAFAFAFAFAF0FAF2
+:10F88000F7F7EFEFDFEFBFDF80BFBF80AAAAAAAA1A
+:10F89000BFBFAAAAAAAAAAAA80BFB0BFADAFAAAA90
+:10F8A000ADAFA2AAADAAAAAFADAAB0AFB0BFAFAF7D
+:10F8B000AFAFAFAFAFAFAFAFAFAFAFAFAFAFAFAF58
+:10F8C000BFB0FFC00000000000000000000000000A
+:10F8D0000000000000000000000000000000000028
+:10F8E0000000000000000000000000000000000018
+:10F8F0000000000000000000000000000000000008
+:10F9000000000000000000000000000000000000F7
+:10F9100000000000000000000000000000000000E7
+:10F9200000000000000000000000000000000000D7
+:10F9300000000000000000000000000000000000C7
+:10F9400000000000000000000000000000000000B7
+:10F9500000000000000000000000000000000000A7
+:10F960000000000000000000000000000000000097
+:10F970000000000000000000000000000000000087
+:10F980000000000000000000000000000000000077
+:10F990000000000000000000000000000000000067
+:10F9A0000000000000000000000000000000000057
+:10F9B0000000000000000000000000000000000047
+:10F9C0000000000000000000000000000000000037
+:10F9D0000000000000000000000000000000000027
+:10F9E0000000000000000000000000000000000017
+:10F9F0000000000000000000000000000000000007
+:10FA000000000000000000000000000000000000F6
+:10FA100000000000000000000000000000000000E6
+:10FA200000000000000000000000000000000000D6
+:10FA300000000000000000000000000000000000C6
+:10FA400000000000000000000000000000000000B6
+:10FA500000000000000000000000000000000000A6
+:10FA60000000000000000000000000000000000096
+:10FA70000000000000000000000000000000000086
+:10FA80000000000000000000000000000000000076
+:10FA90000000000000000000000000000000000066
+:10FAA0000000000000000000000000000000000056
+:10FAB0000000000000000000000000000000000046
+:10FAC0000000000000000000000000000000000036
+:10FAD0000000000000000000000000000000000026
+:10FAE0000000000000000000000000000000000016
+:10FAF0000000000000000000000000000000000006
+:10FB000000000000000000000000000000000000F5
+:10FB100000000000000000000000000000000000E5
+:10FB200000000000000000000000000000000000D5
+:10FB300000000000000000000000000000000000C5
+:10FB400000000000000000000000000000000000B5
+:10FB500000000000000000000000000000000000A5
+:10FB60000000000000000000000000000000000095
+:10FB70000000000000000000000000000000000085
+:10FB80000000000000000000000000000000000075
+:10FB90000000000000000000000000000000000065
+:10FBA0000000000000000000000000000000000055
+:10FBB0000000000000000000000000000000000045
+:10FBC0000000000000000000000000000000000035
+:10FBD0000000000000000000000000000000000025
+:10FBE0000000000000000000000000000000000015
+:10FBF0000000000000000000000000000000000005
+:00000001FF

Bootup Logo/Logos/_clear_logo.hex

@@ -0,0 +1,258 @@
+:020000040800F2
+:10F8000000000000000000000000000000000000F8
+:10F8100000000000000000000000000000000000E8
+:10F8200000000000000000000000000000000000D8
+:10F8300000000000000000000000000000000000C8
+:10F8400000000000000000000000000000000000B8
+:10F8500000000000000000000000000000000000A8
+:10F860000000000000000000000000000000000098
+:10F870000000000000000000000000000000000088
+:10F880000000000000000000000000000000000078
+:10F890000000000000000000000000000000000068
+:10F8A0000000000000000000000000000000000058
+:10F8B0000000000000000000000000000000000048
+:10F8C0000000000000000000000000000000000038
+:10F8D0000000000000000000000000000000000028
+:10F8E0000000000000000000000000000000000018
+:10F8F0000000000000000000000000000000000008
+:10F9000000000000000000000000000000000000F7
+:10F9100000000000000000000000000000000000E7
+:10F9200000000000000000000000000000000000D7
+:10F9300000000000000000000000000000000000C7
+:10F9400000000000000000000000000000000000B7
+:10F9500000000000000000000000000000000000A7
+:10F960000000000000000000000000000000000097
+:10F970000000000000000000000000000000000087
+:10F980000000000000000000000000000000000077
+:10F990000000000000000000000000000000000067
+:10F9A0000000000000000000000000000000000057
+:10F9B0000000000000000000000000000000000047
+:10F9C0000000000000000000000000000000000037
+:10F9D0000000000000000000000000000000000027
+:10F9E0000000000000000000000000000000000017
+:10F9F0000000000000000000000000000000000007
+:10FA000000000000000000000000000000000000F6
+:10FA100000000000000000000000000000000000E6
+:10FA200000000000000000000000000000000000D6
+:10FA300000000000000000000000000000000000C6
+:10FA400000000000000000000000000000000000B6
+:10FA500000000000000000000000000000000000A6
+:10FA60000000000000000000000000000000000096
+:10FA70000000000000000000000000000000000086
+:10FA80000000000000000000000000000000000076
+:10FA90000000000000000000000000000000000066
+:10FAA0000000000000000000000000000000000056
+:10FAB0000000000000000000000000000000000046
+:10FAC0000000000000000000000000000000000036
+:10FAD0000000000000000000000000000000000026
+:10FAE0000000000000000000000000000000000016
+:10FAF0000000000000000000000000000000000006
+:10FB000000000000000000000000000000000000F5
+:10FB100000000000000000000000000000000000E5
+:10FB200000000000000000000000000000000000D5
+:10FB300000000000000000000000000000000000C5
+:10FB400000000000000000000000000000000000B5
+:10FB500000000000000000000000000000000000A5
+:10FB60000000000000000000000000000000000095
+:10FB70000000000000000000000000000000000085
+:10FB80000000000000000000000000000000000075
+:10FB90000000000000000000000000000000000065
+:10FBA0000000000000000000000000000000000055
+:10FBB0000000000000000000000000000000000045
+:10FBC0000000000000000000000000000000000035
+:10FBD0000000000000000000000000000000000025
+:10FBE0000000000000000000000000000000000015
+:10FBF0000000000000000000000000000000000005
+:10F8000000000000000000000000000000000000F8
+:10F8100000000000000000000000000000000000E8
+:10F8200000000000000000000000000000000000D8
+:10F8300000000000000000000000000000000000C8
+:10F8400000000000000000000000000000000000B8
+:10F8500000000000000000000000000000000000A8
+:10F860000000000000000000000000000000000098
+:10F870000000000000000000000000000000000088
+:10F880000000000000000000000000000000000078
+:10F890000000000000000000000000000000000068
+:10F8A0000000000000000000000000000000000058
+:10F8B0000000000000000000000000000000000048
+:10F8C0000000000000000000000000000000000038
+:10F8D0000000000000000000000000000000000028
+:10F8E0000000000000000000000000000000000018
+:10F8F0000000000000000000000000000000000008
+:10F9000000000000000000000000000000000000F7
+:10F9100000000000000000000000000000000000E7
+:10F9200000000000000000000000000000000000D7
+:10F9300000000000000000000000000000000000C7
+:10F9400000000000000000000000000000000000B7
+:10F9500000000000000000000000000000000000A7
+:10F960000000000000000000000000000000000097
+:10F970000000000000000000000000000000000087
+:10F980000000000000000000000000000000000077
+:10F990000000000000000000000000000000000067
+:10F9A0000000000000000000000000000000000057
+:10F9B0000000000000000000000000000000000047
+:10F9C0000000000000000000000000000000000037
+:10F9D0000000000000000000000000000000000027
+:10F9E0000000000000000000000000000000000017
+:10F9F0000000000000000000000000000000000007
+:10FA000000000000000000000000000000000000F6
+:10FA100000000000000000000000000000000000E6
+:10FA200000000000000000000000000000000000D6
+:10FA300000000000000000000000000000000000C6
+:10FA400000000000000000000000000000000000B6
+:10FA500000000000000000000000000000000000A6
+:10FA60000000000000000000000000000000000096
+:10FA70000000000000000000000000000000000086
+:10FA80000000000000000000000000000000000076
+:10FA90000000000000000000000000000000000066
+:10FAA0000000000000000000000000000000000056
+:10FAB0000000000000000000000000000000000046
+:10FAC0000000000000000000000000000000000036
+:10FAD0000000000000000000000000000000000026
+:10FAE0000000000000000000000000000000000016
+:10FAF0000000000000000000000000000000000006
+:10FB000000000000000000000000000000000000F5
+:10FB100000000000000000000000000000000000E5
+:10FB200000000000000000000000000000000000D5
+:10FB300000000000000000000000000000000000C5
+:10FB400000000000000000000000000000000000B5
+:10FB500000000000000000000000000000000000A5
+:10FB60000000000000000000000000000000000095
+:10FB70000000000000000000000000000000000085
+:10FB80000000000000000000000000000000000075
+:10FB90000000000000000000000000000000000065
+:10FBA0000000000000000000000000000000000055
+:10FBB0000000000000000000000000000000000045
+:10FBC0000000000000000000000000000000000035
+:10FBD0000000000000000000000000000000000025
+:10FBE0000000000000000000000000000000000015
+:10FBF0000000000000000000000000000000000005
+:10F8000000000000000000000000000000000000F8
+:10F8100000000000000000000000000000000000E8
+:10F8200000000000000000000000000000000000D8
+:10F8300000000000000000000000000000000000C8
+:10F8400000000000000000000000000000000000B8
+:10F8500000000000000000000000000000000000A8
+:10F860000000000000000000000000000000000098
+:10F870000000000000000000000000000000000088
+:10F880000000000000000000000000000000000078
+:10F890000000000000000000000000000000000068
+:10F8A0000000000000000000000000000000000058
+:10F8B0000000000000000000000000000000000048
+:10F8C0000000000000000000000000000000000038
+:10F8D0000000000000000000000000000000000028
+:10F8E0000000000000000000000000000000000018
+:10F8F0000000000000000000000000000000000008
+:10F9000000000000000000000000000000000000F7
+:10F9100000000000000000000000000000000000E7
+:10F9200000000000000000000000000000000000D7
+:10F9300000000000000000000000000000000000C7
+:10F9400000000000000000000000000000000000B7
+:10F9500000000000000000000000000000000000A7
+:10F960000000000000000000000000000000000097
+:10F970000000000000000000000000000000000087
+:10F980000000000000000000000000000000000077
+:10F990000000000000000000000000000000000067
+:10F9A0000000000000000000000000000000000057
+:10F9B0000000000000000000000000000000000047
+:10F9C0000000000000000000000000000000000037
+:10F9D0000000000000000000000000000000000027
+:10F9E0000000000000000000000000000000000017
+:10F9F0000000000000000000000000000000000007
+:10FA000000000000000000000000000000000000F6
+:10FA100000000000000000000000000000000000E6
+:10FA200000000000000000000000000000000000D6
+:10FA300000000000000000000000000000000000C6
+:10FA400000000000000000000000000000000000B6
+:10FA500000000000000000000000000000000000A6
+:10FA60000000000000000000000000000000000096
+:10FA70000000000000000000000000000000000086
+:10FA80000000000000000000000000000000000076
+:10FA90000000000000000000000000000000000066
+:10FAA0000000000000000000000000000000000056
+:10FAB0000000000000000000000000000000000046
+:10FAC0000000000000000000000000000000000036
+:10FAD0000000000000000000000000000000000026
+:10FAE0000000000000000000000000000000000016
+:10FAF0000000000000000000000000000000000006
+:10FB000000000000000000000000000000000000F5
+:10FB100000000000000000000000000000000000E5
+:10FB200000000000000000000000000000000000D5
+:10FB300000000000000000000000000000000000C5
+:10FB400000000000000000000000000000000000B5
+:10FB500000000000000000000000000000000000A5
+:10FB60000000000000000000000000000000000095
+:10FB70000000000000000000000000000000000085
+:10FB80000000000000000000000000000000000075
+:10FB90000000000000000000000000000000000065
+:10FBA0000000000000000000000000000000000055
+:10FBB0000000000000000000000000000000000045
+:10FBC0000000000000000000000000000000000035
+:10FBD0000000000000000000000000000000000025
+:10FBE0000000000000000000000000000000000015
+:10FBF0000000000000000000000000000000000005
+:10F8000000000000000000000000000000000000F8
+:10F8100000000000000000000000000000000000E8
+:10F8200000000000000000000000000000000000D8
+:10F8300000000000000000000000000000000000C8
+:10F8400000000000000000000000000000000000B8
+:10F8500000000000000000000000000000000000A8
+:10F860000000000000000000000000000000000098
+:10F870000000000000000000000000000000000088
+:10F880000000000000000000000000000000000078
+:10F890000000000000000000000000000000000068
+:10F8A0000000000000000000000000000000000058
+:10F8B0000000000000000000000000000000000048
+:10F8C0000000000000000000000000000000000038
+:10F8D0000000000000000000000000000000000028
+:10F8E0000000000000000000000000000000000018
+:10F8F0000000000000000000000000000000000008
+:10F9000000000000000000000000000000000000F7
+:10F9100000000000000000000000000000000000E7
+:10F9200000000000000000000000000000000000D7
+:10F9300000000000000000000000000000000000C7
+:10F9400000000000000000000000000000000000B7
+:10F9500000000000000000000000000000000000A7
+:10F960000000000000000000000000000000000097
+:10F970000000000000000000000000000000000087
+:10F980000000000000000000000000000000000077
+:10F990000000000000000000000000000000000067
+:10F9A0000000000000000000000000000000000057
+:10F9B0000000000000000000000000000000000047
+:10F9C0000000000000000000000000000000000037
+:10F9D0000000000000000000000000000000000027
+:10F9E0000000000000000000000000000000000017
+:10F9F0000000000000000000000000000000000007
+:10FA000000000000000000000000000000000000F6
+:10FA100000000000000000000000000000000000E6
+:10FA200000000000000000000000000000000000D6
+:10FA300000000000000000000000000000000000C6
+:10FA400000000000000000000000000000000000B6
+:10FA500000000000000000000000000000000000A6
+:10FA60000000000000000000000000000000000096
+:10FA70000000000000000000000000000000000086
+:10FA80000000000000000000000000000000000076
+:10FA90000000000000000000000000000000000066
+:10FAA0000000000000000000000000000000000056
+:10FAB0000000000000000000000000000000000046
+:10FAC0000000000000000000000000000000000036
+:10FAD0000000000000000000000000000000000026
+:10FAE0000000000000000000000000000000000016
+:10FAF0000000000000000000000000000000000006
+:10FB000000000000000000000000000000000000F5
+:10FB100000000000000000000000000000000000E5
+:10FB200000000000000000000000000000000000D5
+:10FB300000000000000000000000000000000000C5
+:10FB400000000000000000000000000000000000B5
+:10FB500000000000000000000000000000000000A5
+:10FB60000000000000000000000000000000000095
+:10FB70000000000000000000000000000000000085
+:10FB80000000000000000000000000000000000075
+:10FB90000000000000000000000000000000000065
+:10FBA0000000000000000000000000000000000055
+:10FBB0000000000000000000000000000000000045
+:10FBC0000000000000000000000000000000000035
+:10FBD0000000000000000000000000000000000025
+:10FBE0000000000000000000000000000000000015
+:10FBF0000000000000000000000000000000000005
+:00000001FF

Bootup Logo/python_logo_converter/img2ts100.py

@@ -8,7 +8,7 @@ import sys
 try:
     from PIL import Image, ImageOps
 except ImportError as error:
-    raise ImportError("{}: {} requres Python Imaging Library (PIL). " 
+    raise ImportError("{}: {} requres Python Imaging Library (PIL). "
                       "Install with `pip` or OS-specific package "
                       "management tool."
                       .format(error, sys.argv[0]))
@@ -32,28 +32,32 @@ def split16(word):
     return (word >> 8) & 0xff, word & 0xff
 
 
-def intel_hex_line(file, record_type, offset, data):
-    """write a line of data in Intel hex format"""
+def intel_hex_line(record_type, offset, data):
+    """generate a line of data in Intel hex format"""
     # length, address offset, record type
     record_length = len(data)
-    file.write(':{:02X}{:04X}{:02X}'.format(record_length, offset, record_type))
+    yield ':{:02X}{:04X}{:02X}'.format(record_length, offset, record_type)
 
     # data
-    map(lambda byte: file.write("{:02X}".format(byte)), data)
+    for byte in data:
+        yield "{:02X}".format(byte)
 
-    # compute and write checksum (with DOS line ending for compatibility/safety)
-    file.write("{:02X}\r\n"
-               .format(((sum(data,                   # sum data ...
-                             record_length           # ... and other ...
-                             + sum(split16(offset))  # ... fields ...
-                             + record_type)          # ... on line
-                         & 0xff)                     # low 8 bits
-                        ^ 0xff)                      # two's ...
-                       + 1))                         # ... complement
+    # compute and write checksum (now using unix style line endings for DFU3.45 compatibility
+    yield "{:02X}\n".format((((sum(data,                   # sum data ...
+                                     record_length           # ... and other ...
+                                     + sum(split16(offset))  # ... fields ...
+                                     + record_type)          # ... on line
+                                 & 0xff)                     # low 8 bits
+                                ^ 0xff)                      # two's ...
+                               + 1)                          # ... complement
+                              & 0xff)                        # low 8 bits
 
 
 def intel_hex(file, bytes_, start_address=0x0):
     """write block of data in Intel hex format"""
+    def write(generator):
+        file.write(''.join(generator))
+
     if len(bytes_) % INTELHEX_BYTES_PER_LINE != 0:
         raise ValueError("Program error: Size of LCD data is not evenly divisible by {}"
                          .format(INTELHEX_BYTES_PER_LINE))
@@ -61,25 +65,21 @@ def intel_hex(file, bytes_, start_address=0x0):
     address_lo =  start_address        & 0xffff
     address_hi = (start_address >> 16) & 0xffff
 
-    intel_hex_line(file,
-                   INTELHEX_EXTENDED_LINEAR_ADDRESS_RECORD,
-                   0,
-                   split16(address_hi))
+    write(intel_hex_line(INTELHEX_EXTENDED_LINEAR_ADDRESS_RECORD, 0,
+                               split16(address_hi)))
 
     size_written = 0
     while size_written < INTELHEX_MINIMUM_SIZE:
         offset = address_lo
         for line_start in range(0, len(bytes_), INTELHEX_BYTES_PER_LINE):
-            intel_hex_line(file,
-                           INTELHEX_DATA_RECORD,
-                           offset,
-                           bytes_[line_start:line_start + INTELHEX_BYTES_PER_LINE])
+            write(intel_hex_line(INTELHEX_DATA_RECORD, offset,
+                                 bytes_[line_start:line_start + INTELHEX_BYTES_PER_LINE]))
             size_written += INTELHEX_BYTES_PER_LINE
             if size_written >= INTELHEX_MINIMUM_SIZE:
                 break
             offset += INTELHEX_BYTES_PER_LINE
 
-    intel_hex_line(file, INTELHEX_END_OF_FILE_RECORD, 0, ())
+    write(intel_hex_line(INTELHEX_END_OF_FILE_RECORD, 0, ()))
 
 
 def img2hex(input_filename,
@@ -158,7 +158,7 @@ def img2hex(input_filename,
         # store in endian-reversed byte order
         data[4 + ndx + (1 if ndx % 2 == 0 else -1)] = byte
 
-    intel_hex(output_file, data, 0x0800B800)
+    intel_hex(output_file, data, 0x0800F800)
 
 
 def parse_commandline():
@@ -229,7 +229,7 @@ if __name__ == "__main__":
         sys.exit(1)
 
     try:
-        with open(args.output_filename, 'w') as output:
+        with open(args.output_filename, 'w', newline='\r\n') as output:
             img2hex(args.input_filename,
                     output,
                     args.preview,

Development Resources/TS100/TS100.ioc

@@ -11,13 +11,15 @@ ADC1.DiscontinuousConvMode=DISABLE
 ADC1.EnableAnalogWatchDog=false
 ADC1.EnableRegularConversion=ENABLE
 ADC1.ExternalTrigConv=ADC_SOFTWARE_START
-ADC1.ExternalTrigInjecConv=ADC_EXTERNALTRIGINJECCONV_T3_CC4
-ADC1.IPParameters=Rank-0\#ChannelRegularConversion,Channel-0\#ChannelRegularConversion,SamplingTime-0\#ChannelRegularConversion,NbrOfConversionFlag,DataAlign,ScanConvMode,ContinuousConvMode,DiscontinuousConvMode,EnableRegularConversion,NbrOfConversion,ExternalTrigConv,InjNumberOfConversion,EnableAnalogWatchDog,Rank-1\#ChannelRegularConversion,Channel-1\#ChannelRegularConversion,SamplingTime-1\#ChannelRegularConversion,master,Rank-2\#ChannelInjectedConversion,Channel-2\#ChannelInjectedConversion,SamplingTime-2\#ChannelInjectedConversion,InjectedOffset-2\#ChannelInjectedConversion,Rank-3\#ChannelInjectedConversion,Channel-3\#ChannelInjectedConversion,SamplingTime-3\#ChannelInjectedConversion,InjectedOffset-3\#ChannelInjectedConversion,Rank-4\#ChannelInjectedConversion,Channel-4\#ChannelInjectedConversion,SamplingTime-4\#ChannelInjectedConversion,InjectedOffset-4\#ChannelInjectedConversion,Rank-5\#ChannelInjectedConversion,Channel-5\#ChannelInjectedConversion,SamplingTime-5\#ChannelInjectedConversion,InjectedOffset-5\#ChannelInjectedConversion,ExternalTrigInjecConv
+ADC1.ExternalTrigInjecConv=ADC_EXTERNALTRIGINJECCONV_T2_CC1
+ADC1.IPParameters=Rank-0\#ChannelRegularConversion,Channel-0\#ChannelRegularConversion,SamplingTime-0\#ChannelRegularConversion,NbrOfConversionFlag,DataAlign,ScanConvMode,ContinuousConvMode,DiscontinuousConvMode,EnableRegularConversion,NbrOfConversion,ExternalTrigConv,InjNumberOfConversion,EnableAnalogWatchDog,Rank-1\#ChannelRegularConversion,Channel-1\#ChannelRegularConversion,SamplingTime-1\#ChannelRegularConversion,master,Rank-2\#ChannelInjectedConversion,Channel-2\#ChannelInjectedConversion,SamplingTime-2\#ChannelInjectedConversion,InjectedOffset-2\#ChannelInjectedConversion,Rank-3\#ChannelInjectedConversion,Channel-3\#ChannelInjectedConversion,SamplingTime-3\#ChannelInjectedConversion,InjectedOffset-3\#ChannelInjectedConversion,Rank-4\#ChannelInjectedConversion,Channel-4\#ChannelInjectedConversion,SamplingTime-4\#ChannelInjectedConversion,InjectedOffset-4\#ChannelInjectedConversion,Rank-5\#ChannelInjectedConversion,Channel-5\#ChannelInjectedConversion,SamplingTime-5\#ChannelInjectedConversion,InjectedOffset-5\#ChannelInjectedConversion,ExternalTrigInjecConv,InjectedConvMode,Mode
 ADC1.InjNumberOfConversion=4
+ADC1.InjectedConvMode=None
 ADC1.InjectedOffset-2\#ChannelInjectedConversion=0
 ADC1.InjectedOffset-3\#ChannelInjectedConversion=0
 ADC1.InjectedOffset-4\#ChannelInjectedConversion=0
 ADC1.InjectedOffset-5\#ChannelInjectedConversion=0
+ADC1.Mode=ADC_DUALMODE_REGSIMULT_INJECSIMULT
 ADC1.NbrOfConversion=2
 ADC1.NbrOfConversionFlag=1
 ADC1.Rank-0\#ChannelRegularConversion=1
@@ -34,6 +36,37 @@ ADC1.SamplingTime-4\#ChannelInjectedConversion=ADC_SAMPLETIME_239CYCLES_5
 ADC1.SamplingTime-5\#ChannelInjectedConversion=ADC_SAMPLETIME_71CYCLES_5
 ADC1.ScanConvMode=ADC_SCAN_ENABLE
 ADC1.master=1
+ADC2.Channel-0\#ChannelRegularConversion=ADC_CHANNEL_8
+ADC2.Channel-1\#ChannelInjectedConversion=ADC_CHANNEL_8
+ADC2.Channel-2\#ChannelInjectedConversion=ADC_CHANNEL_8
+ADC2.Channel-3\#ChannelInjectedConversion=ADC_CHANNEL_8
+ADC2.Channel-4\#ChannelInjectedConversion=ADC_CHANNEL_8
+ADC2.ContinuousConvMode=DISABLE
+ADC2.DataAlign=ADC_DATAALIGN_RIGHT
+ADC2.DiscontinuousConvMode=DISABLE
+ADC2.EnableAnalogWatchDog=false
+ADC2.EnableRegularConversion=ENABLE
+ADC2.IPParameters=Rank-0\#ChannelRegularConversion,Channel-0\#ChannelRegularConversion,SamplingTime-0\#ChannelRegularConversion,NbrOfConversionFlag,Rank-1\#ChannelInjectedConversion,Channel-1\#ChannelInjectedConversion,SamplingTime-1\#ChannelInjectedConversion,InjectedOffset-1\#ChannelInjectedConversion,Rank-2\#ChannelInjectedConversion,Channel-2\#ChannelInjectedConversion,SamplingTime-2\#ChannelInjectedConversion,InjectedOffset-2\#ChannelInjectedConversion,Rank-3\#ChannelInjectedConversion,Channel-3\#ChannelInjectedConversion,SamplingTime-3\#ChannelInjectedConversion,InjectedOffset-3\#ChannelInjectedConversion,Rank-4\#ChannelInjectedConversion,Channel-4\#ChannelInjectedConversion,SamplingTime-4\#ChannelInjectedConversion,InjectedOffset-4\#ChannelInjectedConversion,InjNumberOfConversion,Mode,DataAlign,ScanConvMode,ContinuousConvMode,DiscontinuousConvMode,EnableRegularConversion,NbrOfConversion,InjectedConvMode,EnableAnalogWatchDog
+ADC2.InjNumberOfConversion=4
+ADC2.InjectedConvMode=None
+ADC2.InjectedOffset-1\#ChannelInjectedConversion=0
+ADC2.InjectedOffset-2\#ChannelInjectedConversion=0
+ADC2.InjectedOffset-3\#ChannelInjectedConversion=0
+ADC2.InjectedOffset-4\#ChannelInjectedConversion=0
+ADC2.Mode=ADC_DUALMODE_REGSIMULT_INJECSIMULT
+ADC2.NbrOfConversion=1
+ADC2.NbrOfConversionFlag=1
+ADC2.Rank-0\#ChannelRegularConversion=1
+ADC2.Rank-1\#ChannelInjectedConversion=1
+ADC2.Rank-2\#ChannelInjectedConversion=2
+ADC2.Rank-3\#ChannelInjectedConversion=3
+ADC2.Rank-4\#ChannelInjectedConversion=4
+ADC2.SamplingTime-0\#ChannelRegularConversion=ADC_SAMPLETIME_1CYCLE_5
+ADC2.SamplingTime-1\#ChannelInjectedConversion=ADC_SAMPLETIME_1CYCLE_5
+ADC2.SamplingTime-2\#ChannelInjectedConversion=ADC_SAMPLETIME_1CYCLE_5
+ADC2.SamplingTime-3\#ChannelInjectedConversion=ADC_SAMPLETIME_1CYCLE_5
+ADC2.SamplingTime-4\#ChannelInjectedConversion=ADC_SAMPLETIME_1CYCLE_5
+ADC2.ScanConvMode=ADC_SCAN_ENABLE
 Dma.ADC1.2.Direction=DMA_PERIPH_TO_MEMORY
 Dma.ADC1.2.Instance=DMA1_Channel1
 Dma.ADC1.2.MemDataAlignment=DMA_MDATAALIGN_HALFWORD
@@ -50,7 +83,7 @@ Dma.I2C1_RX.0.MemInc=DMA_MINC_ENABLE
 Dma.I2C1_RX.0.Mode=DMA_NORMAL
 Dma.I2C1_RX.0.PeriphDataAlignment=DMA_PDATAALIGN_BYTE
 Dma.I2C1_RX.0.PeriphInc=DMA_PINC_DISABLE
-Dma.I2C1_RX.0.Priority=DMA_PRIORITY_LOW
+Dma.I2C1_RX.0.Priority=DMA_PRIORITY_MEDIUM
 Dma.I2C1_RX.0.RequestParameters=Instance,Direction,PeriphInc,MemInc,PeriphDataAlignment,MemDataAlignment,Mode,Priority
 Dma.I2C1_TX.1.Direction=DMA_MEMORY_TO_PERIPH
 Dma.I2C1_TX.1.Instance=DMA1_Channel6
@@ -59,7 +92,7 @@ Dma.I2C1_TX.1.MemInc=DMA_MINC_ENABLE
 Dma.I2C1_TX.1.Mode=DMA_NORMAL
 Dma.I2C1_TX.1.PeriphDataAlignment=DMA_PDATAALIGN_BYTE
 Dma.I2C1_TX.1.PeriphInc=DMA_PINC_DISABLE
-Dma.I2C1_TX.1.Priority=DMA_PRIORITY_LOW
+Dma.I2C1_TX.1.Priority=DMA_PRIORITY_MEDIUM
 Dma.I2C1_TX.1.RequestParameters=Instance,Direction,PeriphInc,MemInc,PeriphDataAlignment,MemDataAlignment,Mode,Priority
 Dma.Request0=I2C1_RX
 Dma.Request1=I2C1_TX
@@ -74,22 +107,25 @@ FREERTOS.configMINIMAL_STACK_SIZE=256
 FREERTOS.configTICK_RATE_HZ=100
 FREERTOS.configTOTAL_HEAP_SIZE=10240
 File.Version=6
+I2C1.DutyCycle=I2C_DUTYCYCLE_2
 I2C1.I2C_Mode=I2C_Fast
-I2C1.IPParameters=I2C_Mode
+I2C1.IPParameters=I2C_Mode,DutyCycle
 IWDG.IPParameters=Prescaler
 IWDG.Prescaler=IWDG_PRESCALER_256
 KeepUserPlacement=false
 Mcu.Family=STM32F1
 Mcu.IP0=ADC1
-Mcu.IP1=DMA
-Mcu.IP2=FREERTOS
-Mcu.IP3=I2C1
-Mcu.IP4=IWDG
-Mcu.IP5=NVIC
-Mcu.IP6=RCC
-Mcu.IP7=SYS
-Mcu.IP8=TIM3
-Mcu.IPNb=9
+Mcu.IP1=ADC2
+Mcu.IP10=TIM3
+Mcu.IP2=DMA
+Mcu.IP3=FREERTOS
+Mcu.IP4=I2C1
+Mcu.IP5=IWDG
+Mcu.IP6=NVIC
+Mcu.IP7=RCC
+Mcu.IP8=SYS
+Mcu.IP9=TIM2
+Mcu.IPNb=11
 Mcu.Name=STM32F103T(8-B)Ux
 Mcu.Package=VFQFPN36
 Mcu.Pin0=PA6
@@ -100,9 +136,12 @@ Mcu.Pin12=PB7
 Mcu.Pin13=VP_FREERTOS_VS_ENABLE
 Mcu.Pin14=VP_IWDG_VS_IWDG
 Mcu.Pin15=VP_SYS_VS_tim1
-Mcu.Pin16=VP_TIM3_VS_ClockSourceINT
-Mcu.Pin17=VP_TIM3_VS_no_output4
+Mcu.Pin16=VP_TIM2_VS_ClockSourceINT
+Mcu.Pin17=VP_TIM2_VS_no_output1
+Mcu.Pin18=VP_TIM2_VS_no_output3
+Mcu.Pin19=VP_TIM3_VS_ClockSourceINT
 Mcu.Pin2=PB0
+Mcu.Pin20=VP_TIM3_VS_no_output4
 Mcu.Pin3=PB1
 Mcu.Pin4=PA8
 Mcu.Pin5=PA9
@@ -110,28 +149,31 @@ Mcu.Pin6=PA13
 Mcu.Pin7=PA14
 Mcu.Pin8=PB3
 Mcu.Pin9=PB4
-Mcu.PinsNb=18
+Mcu.PinsNb=21
+Mcu.ThirdPartyNb=0
 Mcu.UserConstants=
 Mcu.UserName=STM32F103T8Ux
-MxCube.Version=4.22.0
-MxDb.Version=DB.4.0.220
-NVIC.ADC1_2_IRQn=true\:5\:0\:false\:false\:true\:true
-NVIC.BusFault_IRQn=true\:0\:0\:false\:false\:true\:false
-NVIC.DMA1_Channel1_IRQn=true\:5\:0\:false\:false\:true\:true
-NVIC.DMA1_Channel6_IRQn=true\:5\:0\:false\:false\:true\:true
-NVIC.DMA1_Channel7_IRQn=true\:5\:0\:false\:false\:true\:true
-NVIC.DebugMonitor_IRQn=true\:0\:0\:false\:false\:true\:false
-NVIC.HardFault_IRQn=true\:0\:0\:false\:false\:true\:false
-NVIC.MemoryManagement_IRQn=true\:0\:0\:false\:false\:true\:false
-NVIC.NonMaskableInt_IRQn=true\:0\:0\:false\:false\:true\:false
-NVIC.PendSV_IRQn=true\:15\:0\:false\:false\:false\:true
+MxCube.Version=4.26.0
+MxDb.Version=DB.4.0.260
+NVIC.ADC1_2_IRQn=true\:5\:0\:false\:false\:true\:true\:true
+NVIC.BusFault_IRQn=true\:0\:0\:false\:false\:true\:false\:true
+NVIC.DMA1_Channel1_IRQn=true\:5\:0\:false\:false\:true\:true\:true
+NVIC.DMA1_Channel6_IRQn=true\:5\:0\:false\:false\:true\:true\:true
+NVIC.DMA1_Channel7_IRQn=true\:5\:0\:false\:false\:true\:true\:true
+NVIC.DebugMonitor_IRQn=true\:0\:0\:false\:false\:true\:false\:true
+NVIC.HardFault_IRQn=true\:0\:0\:false\:false\:true\:false\:true
+NVIC.I2C1_ER_IRQn=true\:5\:0\:false\:false\:true\:true\:true
+NVIC.I2C1_EV_IRQn=true\:5\:0\:false\:false\:true\:true\:true
+NVIC.MemoryManagement_IRQn=true\:0\:0\:false\:false\:true\:false\:true
+NVIC.NonMaskableInt_IRQn=true\:0\:0\:false\:false\:true\:false\:true
+NVIC.PendSV_IRQn=true\:15\:0\:false\:false\:false\:true\:true
 NVIC.PriorityGroup=NVIC_PRIORITYGROUP_4
-NVIC.SVCall_IRQn=true\:0\:0\:false\:false\:false\:false
-NVIC.SysTick_IRQn=true\:15\:0\:false\:false\:true\:true
-NVIC.TIM1_UP_IRQn=true\:0\:0\:false\:false\:true\:false
+NVIC.SVCall_IRQn=true\:0\:0\:false\:false\:false\:false\:true
+NVIC.SysTick_IRQn=true\:15\:0\:false\:false\:true\:true\:true
+NVIC.TIM1_UP_IRQn=true\:0\:0\:false\:false\:true\:false\:true
 NVIC.TimeBase=TIM1_UP_IRQn
 NVIC.TimeBaseIP=TIM1
-NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:false
+NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:false\:true
 PA13.Locked=true
 PA13.Mode=Serial_Wire
 PA13.Signal=SYS_JTMS-SWDIO
@@ -193,29 +235,30 @@ PCC.Vdd=3.3
 PinOutPanel.RotationAngle=0
 ProjectManager.AskForMigrate=true
 ProjectManager.BackupPrevious=false
-ProjectManager.CompilerOptimize=2
+ProjectManager.CompilerOptimize=3
 ProjectManager.ComputerToolchain=false
 ProjectManager.CoupleFile=false
-ProjectManager.CustomerFirmwarePackage=C\:/Users/Ben V. Brown/STM32Cube/Repository/STM32Cube_FW_F1_V1.6.0
+ProjectManager.CustomerFirmwarePackage=
 ProjectManager.DefaultFWLocation=true
 ProjectManager.DeletePrevious=true
 ProjectManager.DeviceId=STM32F103T8Ux
-ProjectManager.FirmwarePackage=STM32Cube FW_F1 V1.6.0
+ProjectManager.FirmwarePackage=STM32Cube FW_F1 V1.6.1
 ProjectManager.FreePins=true
 ProjectManager.HalAssertFull=false
 ProjectManager.HeapSize=0x200
 ProjectManager.KeepUserCode=true
 ProjectManager.LastFirmware=true
 ProjectManager.LibraryCopy=1
-ProjectManager.PreviousToolchain=SW4STM32
+ProjectManager.MainLocation=Src
+ProjectManager.PreviousToolchain=TrueSTUDIO
 ProjectManager.ProjectBuild=false
 ProjectManager.ProjectFileName=TS100.ioc
 ProjectManager.ProjectName=TS100
 ProjectManager.StackSize=0x400
-ProjectManager.TargetToolchain=SW4STM32
-ProjectManager.ToolChainLocation=C\:\\Users\\Ralim\\Repo\\ts100\\TS100
-ProjectManager.UnderRoot=false
-ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-HAL,2-MX_DMA_Init-DMA-false-HAL,3-MX_I2C1_Init-I2C1-false-HAL,4-MX_ADC1_Init-ADC1-false-HAL,5-SystemClock_Config-RCC-false-HAL,6-MX_TIM3_Init-TIM3-false-HAL,7-MX_IWDG_Init-IWDG-false-HAL
+ProjectManager.TargetToolchain=TrueSTUDIO
+ProjectManager.ToolChainLocation=
+ProjectManager.UnderRoot=true
+ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-HAL-true,2-MX_DMA_Init-DMA-false-HAL-true,3-MX_I2C1_Init-I2C1-false-HAL-true,4-MX_ADC1_Init-ADC1-false-HAL-true,5-SystemClock_Config-RCC-false-HAL-true,6-MX_TIM3_Init-TIM3-false-HAL-true,7-MX_IWDG_Init-IWDG-false-HAL-true,8-MX_TIM2_Init-TIM2-false-HAL-true,9-MX_ADC2_Init-ADC2-false-HAL-true
 RCC.ADCFreqValue=8000000
 RCC.ADCPresc=RCC_ADCPCLK2_DIV8
 RCC.AHBFreq_Value=64000000
@@ -240,8 +283,8 @@ RCC.USBFreq_Value=42666666.666666664
 RCC.USBPrescaler=RCC_USBCLKSOURCE_PLL_DIV1_5
 SH.ADCx_IN7.0=ADC1_IN7,IN7
 SH.ADCx_IN7.ConfNb=1
-SH.ADCx_IN8.0=ADC2_IN8
-SH.ADCx_IN8.1=ADC1_IN8,IN8
+SH.ADCx_IN8.0=ADC1_IN8,IN8
+SH.ADCx_IN8.1=ADC2_IN8,IN8
 SH.ADCx_IN8.ConfNb=2
 SH.ADCx_IN9.0=ADC2_IN9
 SH.ADCx_IN9.1=ADC1_IN9,IN9
@@ -252,6 +295,9 @@ SH.GPXTI5.0=GPIO_EXTI5
 SH.GPXTI5.ConfNb=1
 SH.S_TIM3_CH1.0=TIM3_CH1,PWM Generation1 CH1
 SH.S_TIM3_CH1.ConfNb=1
+TIM2.Channel-PWM\ Generation1\ No\ Output=TIM_CHANNEL_1
+TIM2.Channel-PWM\ Generation3\ No\ Output=TIM_CHANNEL_3
+TIM2.IPParameters=Channel-PWM Generation1 No Output,Channel-PWM Generation3 No Output
 TIM3.Channel-Output\ Compare4\ No\ Output=TIM_CHANNEL_4
 TIM3.Channel-PWM\ Generation1\ CH1=TIM_CHANNEL_1
 TIM3.ClockDivision=TIM_CLOCKDIVISION_DIV4
@@ -267,6 +313,12 @@ VP_IWDG_VS_IWDG.Mode=IWDG_Activate
 VP_IWDG_VS_IWDG.Signal=IWDG_VS_IWDG
 VP_SYS_VS_tim1.Mode=TIM1
 VP_SYS_VS_tim1.Signal=SYS_VS_tim1
+VP_TIM2_VS_ClockSourceINT.Mode=Internal
+VP_TIM2_VS_ClockSourceINT.Signal=TIM2_VS_ClockSourceINT
+VP_TIM2_VS_no_output1.Mode=PWM Generation1 No Output
+VP_TIM2_VS_no_output1.Signal=TIM2_VS_no_output1
+VP_TIM2_VS_no_output3.Mode=PWM Generation3 No Output
+VP_TIM2_VS_no_output3.Signal=TIM2_VS_no_output3
 VP_TIM3_VS_ClockSourceINT.Mode=Internal
 VP_TIM3_VS_ClockSourceINT.Signal=TIM3_VS_ClockSourceINT
 VP_TIM3_VS_no_output4.Mode=Output Compare4 No Output

Development Resources/TS80-Bootloader.hex

@@ -0,0 +1,515 @@
+:020000040800F2
+:2000000020310020E52E00088D2E00088F2E0008912E0008932E0008952E00080000000071
+:20002000000000000000000000000000972E0008992E0008000000009B2E00089D2E000880
+:20004000252F0008292F00082D2F0008312F0008352F0008392F00083D2F0008412F000850
+:20006000452F0008492F00084D2F0008512F0008552F0008592F00085D2F0008612F000830
+:20008000652F0008692F00086D2F0008712F00089F2E0008792F00087D2F0008812F0008E7
+:2000A000852F0008892F00088D2F0008912F0008952F0008992F00089D2F0008A12F0008F0
+:2000C000A52F0008A92F0008AD2F0008B12F0008B52F0008B92F0008BD2F0008C12F0008D0
+:2000E000C52F0008C92F0008CD2F0008D12F0008D52F0008D92F0008DD2F0008E12F0008B0
+:20010000E52F0008E92F0008ED2F0008F12F0008F52F0008F92F0008FD2F0008013000088E
+:2001200005300008093000080D3000081130000870B500F08FFEDFF8144804F510553C350F
+:200140000146284600F016FC4FF40051204600F0D1FE04F200464FF4B0720FF650213046A2
+:2001600000F0F2FE0B222946304600F0EDFE0FF6CC4518222946204600F0E6FE1822294610
+:2001800004F5007000F0E0FEDFF8C407C4F81604A0220FF6783104F5C06000F0D5FE5022F2
+:2001A0000FF6084104F5006000F0CEFE40220FF64C4104F5206000F0C7FE42F20C20011940
+:2001C0000022CA760A774A7602518A600A61CA6070BD70B50C46DFF87467B4F5805F03D1F8
+:2001E00000F044F830460EE0B4F5205F04D100F03DF806F5007006E0B4F5804F07D100F0BC
+:2002000035F806F58060BDE8704000F08DBEB4F51A4F2AD300F02AF806F5C06000F084FE98
+:200220004FF40072314606F508503C3000F08CFE42F2272085196978B9B9DFF81817098856
+:20024000825D32B9B4F52A4F00D271B100F0A2F90AE0012A09D111B1B4F51C4F02D2B4F5F1
+:200260002C4F02D300F08BFA687070BD4FF400720146704710B50446080004D14FF4007260
+:200280000FF228713DE0DFF8C416B0F5805F08BF4FF4007235D0B0F5205F04D14FF4007243
+:2002A00001F500712DE0B0F5804F04D14FF4007201F5806125E0B0F5004F05D100F02DF811
+:2002C000A0220FF648211CE0B0F5024F05D100F024F850220FF6D42113E06FF402421218EA
+:2002E00041F2FF739A4205D200F017F840220FF60C3106E0B0F51A4F08D34FF4007201F589
+:20030000C0612046BDE8104000F00EBE4FF400712046BDE8104000F053BE4FF4007120467B
+:2003200000F04EBE2DE9F84F4FF02008DFF81C5642F227277C194FF4085908EB050000F20F
+:200340000046002030733078E52818BF002800F0E580F07A202840F0E180307A482826D137
+:20036000707A452804BFB07A582840F0D08000F0DDF800207855607820B102280DD00428AB
+:2003800006D010E05220307244207072592009E0452030725220707204E04E2030724F201D
+:2003A00070725420B072F07D401CF075B4E041285AD1707A442804BFB07A52285BD100F096
+:2003C000B5F800207855607049F805004FF0020A95F80006302804BF95F8010678281ED151
+:2003E0000AEB050090F80006A0F13001C9B20A2922BFA0F14101C9B2062922BFA0F16101D3
+:20040000C9B206290BD259F805104FEA011B49F805B000F0DAF9584449F8050003E0607844
+:2004200040F0040060700AF1010ABAF10A0FCFDB6078A0B959F80500DFF81C15884202D316
+:2004400000F00FFD18B94E2030724F2004E001207855532030724520707254205BE045200E
+:2004600030725220707256E0422820D1707A492804BFB07A4E284AD100F058F8785D28B926
+:200480004E2030724F207072542004E052203072442070725920B072785D022804BF0020CC
+:2004A0007855785D012837D10220785534E053280DD1707A452804BFB07A542827D1785D80
+:2004C00060BB5520307253207072452023E0522805D1707A44281AD1B07A59280EE0552886
+:2004E00005D1707A532812D1B07A452806E0452806D1707A52280AD1B07A522807D10DE075
+:200500004E2801BF707A4F28B07A542806D04520307252207072B0720320607008F1200837
+:20052000B8F5007FFFF609AFBDE8F18FB07EF17E00EB01200005000DDFF8181408804FF434
+:200540007A7000F041BD70B542F20C25DFF8FC63AC19207F03281BD100F0F5FD0028FBD1B2
+:2005600000F03FFD4FF4C87000F02EFD012000F038FD00F0F5FD002020776076A060A8510B
+:20058000DFF8D00300210180E07E022808BFE17670BD00002DE9F04742F20424DFF8AC53BD
+:2005A00066190020F060306900EB0509F068401942F2242A0AEB050742F2292879780E29D9
+:2005C00056D8DFE801F0080C131B1F2C324146595F757B838A0090F800063A2874E000F006
+:2005E000CBF80001B0770020306173E096F81E8000F0C2F84044B077B07F5DE000F0BCF87B
+:2006000000010AE054F8058000F0B6F8404460516059F17F4118F177000260515AE000F084
+:20062000ABF800010AF8050054E01AF8058000F0A3F840440AF8050060591AF8051008182E
+:200640006051F07F081837E000F096F80001707740E096F81D8000F08FF840447077F07F41
+:20066000717F0818F0777878401C7870B07F002876D17878801C72E000F07EF8000108F8EC
+:20068000090027E018F809A000F076F8504408F809003069F17F421918F802205118F1772F
+:2006A000401C3061B17F884214D27878401E56E000F060F808EB0010F0770BE000F05AF80A
+:2006C0004044F077F07F002846D103E090F800060D2841D17878401C41E090F800060A289C
+:2006E0003AD10020F870707F042805D17879B979090401EB00607060707F012837D068BBE8
+:2007000060597168081860519349884201D202202EE0002001E03069801C30613069B17F3D
+:2007200088421BD26159401800F03BFD31694A1960590818491CB37F994218F8021008BF97
+:2007400041F47F4104D04244527801EB022189B200F016FD0428DED0042009E00020787044
+:20076000F068401CF060B0F5007FFFF41CAF0020BDE8F08796F81F8090F8000625E0F8B5EA
+:200780000024724D05F508564FF408577859F168081800F006FD601990F8001690F8010699
+:2007A00001EB002189B27859F268101800F0E8FCF168891CF160042801D00420F2BDA41CEB
+:2007C000B4F5007FE2D30020F2BD10B585B0044600A80FF2C411112200F0B6FBA4F16100E1
+:2007E000C0B21A2838BF203C002000A9415CE4B2A14204D0401CC0B21028F6D3002005B09B
+:2008000010BD2DE9F04142F21824504D6619534F327A2AB940023860480278600120307248
+:20082000307A012831D1605978B905F5005839684046FFF71FFD40229821404600F0C6FC1B
+:200840004FF4E070605140200CE040229821B868401900F5005000F0B9FC605940386051A8
+:20086000B8684030B8604021012000F05AFD3021012000F0E0FC38684030386078684038C9
+:2008800078603748816840398160786838B96051B860386033480321017000203072BDE815
+:2008A000F0812DE9F04142F21C24284D6259403266192D4F33792BB94002386048027860E3
+:2008C00001203071307901282FD1002027490AE05B1903F5005310F801C083F800C0401CEB
+:2008E00063595B1C635163599342F1D3DFF88080B8F800003968411839607A68101A7860BE
+:20090000C00507D100206051A1F5007105F50050FFF75FFC12488168B8F80020891A816030
+:200920004FF44051022000F097FC786800281EBF0C480078042806D100206051012100F0A7
+:2009400057FE00203071BDE8F0810000EC010020188DDD40102D002000400008D82C0020D3
+:20096000C82C0020942C0020E42C0020342C0020962C00201C2221FA02F303F00F030A2B69
+:20098000ACBF3733303300F8013B121F53B2002BF1D50021017070473031323334353637DF
+:2009A000383941424344454600000000EB3C904D53444F53352E3000020108000200020052
+:2009C00010F80C00010001000000000000000000000029A298E46C4E4F204E414D45202030
+:2009E0002020464154313220202033C98ED1BCF07B8ED9B800208EC0FCBD007C384E247DAE
+:200A0000248BC199E83C01721C83EB3A66A11C7C26663B07268A57FC750680CA028856025B
+:200A200080C31073EB33C98A461098F7661603461C13561E03460E13D18B7611608946FCBA
+:200A40008956FEB82000F7E68B5E0B03C348F7F30146FC114EFE61BF0000E8E600723926B9
+:200A6000382D741760B10BBEA17DF3A66174324E740983C7203BFB72E6EBDCA0FB7DB47D1B
+:200A80008BF0AC9840740C487413B40EBB0700CD10EBEFA0FD7DEBE6A0FC7DEBE1CD16CD4D
+:200AA00019268B551A52B001BB0000E83B0072E85B8A5624BE0B7C8BFCC746F03D7DC746D3
+:200AC000F4297D8CD9894EF2894EF6C606967DCBEA030000200FB6C8668B46F86603461C43
+:200AE000668BD066C1EA10EB5E0FB6C84A4A8A460D32E4F7E20346FC1356FEEB4A52500655
+:200B0000536A016A10918B4618969233D2F7F691F7F64287CAF7761A8AF28AE8C0CC020AEB
+:200B2000CCB80102807E020E7504B4428BF48A5624CD136161720B40750142035E0B4975ED
+:200B400006F8C341BB000060666A00EBB04E544C44522020202020200D0A52656D6F766544
+:200B6000206469736B73206F72206F74686572206D656469612EFF0D0A4469736B2065720E
+:200B8000726F72FF0D0A507265737320616E79206B657920746F20726573746172740D0ACF
+:200BA00000000000000000ACCBD855AA4446552056335F34325F44080000000000000000EF
+:200BC00000008A5A794500000000000042200049006E0066006F000F007272006D006100C4
+:200BE000740069006F0000006E00000001530079007300740065000F00726D0020005600BE
+:200C00006F006C00750000006D00650053595354454D7E3120202016005E63705D455D4533
+:200C2000000064705D45020000000000412E005F002E00540072000F007F610073006800B0
+:200C40006500730000000000FFFFFFFF7E3120202020202054524122004A8A5A794579459E
+:200C600000008A5A7945050000100000E552415348457E3145464D1200478A5A7945794525
+:200C800000008A5A7945040000000000412E0054007200610073000F002568006500730031
+:200CA0000000FFFFFFFF0000FFFFFFFF5452415348457E312020201200478A5A79457945AD
+:200CC00000008A5A7945040000000000412E0066007300650076000F00DA65006E0074001B
+:200CE0007300640000000000FFFFFFFF46534556454E7E3120202012004D8A5A794579458C
+:200D000000008A5A79450D00000000002E2020202020202020202010005E63705D455D4531
+:200D2000000064705D450200000000002E2E20202020202020202010005E63705D455D453A
+:200D4000000064705D4500000000000042470075006900640000000F00FFFFFFFFFFFFFF4A
+:200D6000FFFFFFFFFFFF0000FFFFFFFF0149006E006400650078000F00FF65007200560049
+:200D80006F006C00750000006D006500494E444558457E3120202020007263705D455D45BC
+:200DA000000064705D4503004C0000007B00380031004200320031003700330033002D001B
+:200DC00036003800440039002D0034003000350039002D0041003500370033002D004500AA
+:200DE000410030004400320033003200450039003300320031007D00000000002E20202088
+:200E0000202020202020203200478A5A7945794500008A5A79450400000000002E2E2020D7
+:200E2000202020202020201000478A5A7945794500008A5A7945000000000000F8FFFFFF84
+:200E4000FFFFFF6F0007800009A0000BC000FFFFFFFF0F00234801684268511880684018F9
+:200E6000704710B5FFF7F6FF1F490C6800F006F8844201D1012010BD002010BD0A231B4A3C
+:200E800001461B48FFE7F0B503F11506C3F14304C3F151050A330EE0C0EB40105F1003EB86
+:200EA00097774FEAA70CA3EB8C07FF0021FA07F7FFB238185B1C1BB2B342EDDB0DE0C0EB65
+:200EC0004010631004EB93739B10A4EB8301C90022FA01F1C9B20818641C24B2AC42EEDB1D
+:200EE000F0BD0000E8F7FF1FFC3F0008011020D502DEC0DE002200F0BDBB10B450F8041BCC
+:200F000081B102681218001D50F8043BDC0744BFA9F10104E31852F8044B43F8044B091F9C
+:200F2000F9D1EBE710BC704762B38B0708D0521E11F8013B00F8013B00F024808B07F6D13D
+:200F4000830740F0208000BF103A07D330B4B1E83810103AA0E83810F9D230BC530724BF81
+:200F6000B1E80810A0E8081044BF51F8043B40F8043BD20724BF31F8022B20F8022B44BFC4
+:200F80000B7803707047083A07D3B1E80810083A40F8043B40F804CBF7D25307E4E750F8E1
+:200FA000041B61B150F8042BD30744BFA9F101039A18002342F8043B091FFAD1EFE7704740
+:200FC000002200F071BB000000214FF6FF7302E04D4A1360491C40F2DC5242439142F7D328
+:200FE00070474A494FF400620A614FF480520A61002808680AD120F4404040F440500860E4
+:20100000086820F4402040F4403009E020F4804040F430400860086820F4802040F43020D7
+:201020000860704780F308887047704738B500F06BFB102000F0E0FB354C207820B10220D6
+:2010400000F0D4FB082502E000F0D0FB002531484168314A11434160016841F08071016064
+:20106000012000F06AFB012000F06AFB392000F094FB0028FAD0207800B1022000F063FB01
+:2010800000F068FBA842FBD10121142000F06AFB012140F20C6000F06EFB01214FF400001E
+:2010A00000F072FB207820B10120BDE8324000F056BB31BD80B501464FF0006000F047FCF5
+:2010C0004FF4A06000F012FC14208DF8000002208DF8010000208DF8020001208DF803001E
+:2010E00000A800F008FC01BD0C484FF6FF71C1600B4A02600B4A42600B48C1600B49016095
+:201100004FF08831416070470C10014004080140E8010020001002400A846800000801403B
+:201120008888880884B4BB8B000C0140884883440948012101600021016041604FF4E05142
+:20114000064A118005E0044801210160002141600321016000207047405C0040142D00209F
+:201160000448C0610221017203490162034A426208680047A02C0020D800002030010020E0
+:2011800038B504460D46104800F0A0FB05281CBF342000F07AFB29462046BDE8344000F043
+:2011A0005BBB10B50446A0050CD1074800F08EFB05281CBF342000F068FB2046BDE81040B6
+:2011C00000F02EBB10BD0000A086010010B5490001F1804101F5C041521C521009E010F8C9
+:2011E000013B10F8014B43EA042321F8023B891C521EF4D110BD490001F1804101F5C0411B
+:20120000521C521004E051F8043B20F8023B521EF9D170474FF6F8710840DFF89011086076
+:20122000704710B5DFF8882152F8203048F68F142340194324E010B5DFF8742152F82030A9
+:2012400048F6BF742340CC0648BF83F01003890648BF83F020030FE010B5DFF8542152F8E5
+:2012600020304BF68F742340CC0448BF83F48053890448BF83F4005343F4004141F08001CE
+:2012800042F8201010BDDFF8281151F820204BF68F731A4082F4405242F4004209E0DFF8A1
+:2012A000101151F8202048F68F631A4042F40042FFE742F0800241F820207047DFF8F010E1
+:2012C00051F8202052040AD551F8202048F68F731A4042F4404242F0800241F82020704791
+:2012E000334951F8202052060AD551F8202048F68F731A4042F4004242F0C00241F82020AA
+:20130000704738E0294A126892B202EBC000294A37E03BE02549096889B201EBC000254947
+:201320003AE0224A126892B202EBC000224A2AE01E4A126892B202EBC000204A02EB4000DC
+:201340003F2909D34A091F23194208BF521E1204910941F4004105E04A08C90748BF521C80
+:2013600012049109016070471049096889B201EBC000124914E00D4A126892B202EBC000E3
+:201380000F4A4908490042F8101070470749096889B201EBC0000A4951F8100080B270470C
+:2013A00051F810008005800D70470000505C0040005C004008600040046000400C6000408B
+:2013C000006000400106090C41EA10207047000080B5964890F82010022909D018D3042958
+:2013E00002D00ED3052913D1002180F820100CE0C17B28290CD1816A406ABDE8044000F09B
+:20140000FEBA0121002000F0F3F84FF440512BE101BD38B5854CE57B0220FFF7A5FF60849B
+:201420000246D8218248FFF7E6FE94F8200010B1012803D00AE0BDE8314013E02A2D06D13D
+:20144000A16A606ABDE8344000F003BB022000F0F9F82421052000F0CDFA00210220BDE8E4
+:201460003440C5E010B5714C628C1AB170492046FFF76AFD6F4861684160A1688160608CA5
+:201480001F2806D0022000F0DDF8002020601A218DE0E27B282A18BF2A2A0FD1607CA17C4D
+:2014A000090441EA0060E17C40EA0120217D08436062A07DE17D41EA0020A06220685E494A
+:2014C000884270D15D480068617B884204D3A07B401EC0B2102804D3022000F0B3F824217B
+:2014E00065E0606AA16A002A49D0032A2BD0082A18BF0A2A53D0122A29D0152A4FD01A2A30
+:201500002DD01B2A27D01D2A49D01E2A23D0232A2DD0252A2FD0282A35D02A2A37D02F2A54
+:2015200039D0552A3BD05A2A1DD0882A18BF8A2A35D08F2A18BF9E2A31D0A82A1CBFAA2A8B
+:20154000AF2A2CD02FE0BDE8104000F04BBABDE8104000F011BABDE8104000F04FBABDE87A
+:20156000104000F037BABDE8104000F037BABDE8104000F010BABDE8104000F01BBABDE856
+:20158000104000F0A5BABDE8104000F038BABDE8104000F05EBABDE8104000F083BABDE811
+:2015A000104000F09ABA022000F04CF82021052000F020FA00210120BDE8104018E010B5DD
+:2015C0000C4622469821FFF701FE21460120FFF7A8FE30210120FFF72EFE1448032180F8F3
+:2015E000201014488168091B81600021017310BD10B50C460F4B1249196018730D22982157
+:201600001846FFF7E3FD0D210120FFF78AFE0748052180F8201044B1042180F82010302199
+:201620000120BDE81040FFF706BE10BD742C0020342C0020C82C002055534243002D00203F
+:201640005553425380B518B1022807D00AD301BD10210120BDE80440FFF7EDBD1021012086
+:20166000FFF7E9FD4FF480510220BDE80440FFF7F3BD000000B500BF130096469446103943
+:2016800028BFA0E80C50FAD85FEA417C28BF0CC048BF40F8042BC90728BF20F8022B48BF83
+:2016A00000F8012B00BD0000401810F0030308D0C91A1FD3DB0748BF00F8012D28BF20F830
+:2016C000022D130030B414461546103928BF20E93C00FAD8490728BF20E90C0048BF40F85D
+:2016E000042D890028BF20F8022D48BF00F8012D30BC7047C91818BF00F8012DCB0728BF9B
+:2017000000F8012D704700002E48016841F00101016041682C4A1140416001682B4A114039
+:201720000160016821F480210160416821F4FE0141604FF41F0181607047254908607047E2
+:2017400025490860704723490A68920850EA8200086070471F48006800F00C0070471F49BF
+:20176000086070471E4A0029116814BF084321EA0000106070471B4A0029116814BF0843CB
+:2017800021EA000010607047174A0029116814BF084321EA00001060704700214209094B04
+:2017A000012A08BF1A6803D0022A0CBF1A6A5A6A012300F01F0003FA00F0024218BF012146
+:2017C00008467047001002400000FFF8FFFFF6FE000042420410024060004242D8004242AF
+:2017E00014100240181002401C100240DFF8C4100A6802F0380206E0DFF8B8100A6822F059
+:2018000010020A600A68104308607047FFE7DFF8A800DFF8A8100160DFF8A4100160704770
+:2018200038B5054600F015F804280DD1DFF89440206840F002002060656000F006F8216848
+:2018400041F6FD721140216032BD206840F0400020604FF4302039E070B504460D4600F04B
+:2018600011F804280CD1174E306840F001003060258000F007F8316841F6FE7211403160E2
+:2018800070BD08804FF4005020E00F490860704704200D490A68D20701D5012070470A68A4
+:2018A000520701D5022070470968C90648BF03207047000000200240042002402301674567
+:2018C000AB89EFCD102002400C20024010B5FFE70446FFF7DDFF03E02CB1FFF7D9FF641E61
+:2018E0000128F9D004B9052010BD00001B4908431B490860704770B503781A460121C478B7
+:20190000ECB1174B1B6803F4E063C3F5E0631B0A4478C3F10405AC4085780F2626FA03F33E
+:201920002B4023431B010F4C1355007842110E4B00F01F0001FA00F043F8220070BD5011EE
+:201940000A4A03F01F03994042F8201070BD084A1140084307490860704700000000FA0552
+:201960000CED00E000E400E000E100E080E100E080FFFF1F08ED00E07449087CC00702D577
+:201980007348052105E00FF2E410C97C252928BF2421FFF714BE6F48002181800221817117
+:2019A0000021C1714172022181720021C1720C21FFF705BE6848002101800F218170FF213E
+:2019C000C17000218180022181710021C1710821FFF7F5BD04216148FFF7F1BD0821604838
+:2019E000FFF7EDBD5948C17C132928BF12215D48FFF7E5BD5B4A90701173704769E070B588
+:201A000004460D46584E3078C0B92A462146282000F076F8C8B14D48007B000603D502205C
+:201A2000307029460CE00220FFF70CFE00F00EF801210120BDE87040FFF7DABD022804D16F
+:201A40002046BDE87040FEF7DCBE70BD24210520D0E710B5444C2278EAB90A4601462A207B
+:201A600000F04EF8E8B13948007B000608D4012020704FF440510220BDE81040FFF7ECBB80
+:201A80000020FFF7DFFDFFF7E1FF00210120BDE81040FFF7ADBD012A04BFBDE81040FEF70F
+:201AA00000BF10BD80B52948816829B9007C400702D40121002006E00220FFF7C3FDFFF79A
+:201AC000C5FF00210120FFE7BDE80440FFF790BD00BF01210020FFF78BBD80B51B4881682E
+:201AE00009B9002004E0007B00064CBF00200220FFF7A8FD2021FFF7AAFF00210120E3E7CB
+:201B000080B55118B1F5805F09D92A2804BF0220FFF798FD0020FFF795FD21210BE00B49D5
+:201B20008968B1EB422F0ED02A280CBF02200020FFF788FD2421FFF78AFF00210120FFF7F3
+:201B400057FD002002BD012002BD0000742C0020EC2C0020BC010020F42C0020E401002058
+:201B6000D8010020A8010020942C002000800202200000005669727475616C204446552019
+:201B80004469736B20202020202020202020202010B5DFF8884700B92BE000F096F8006825
+:201BA000804720680A3010BD80B5DFF870070068C178DFF86C2752788A420CD38278002AA8
+:201BC00004BF8288002A06D1817200F07EF840688047002002BD022002BD10B5DFF83C4790
+:201BE00000B906E000F071F88068804720680C3010BD206801210182002010BD10B5DFF8F7
+:201C00001C472068C1784079DFF8182712689269904721688A7A92B1002804BF0879002821
+:201C20000DD1887858B900F050F8C068804720684179C1722068C1780173002010BD0220D5
+:201C400010BD1CB5DFF8D416096810B90220088239E0DFF8D44600202080087800227F2331
+:201C6000184215D1487A81064CBF42F0020102F0FD0121702178400654BF01F0FE0041F008
+:201C80000100207000F021F800698047204616BD00F07F03012BF9D000F07F00022812D15E
+:201CA000487900F00F0142F0010200F088FA05D500F030001028E5D12270E3E700F44050F4
+:201CC000B0F5805FF7E7002016BDDFF8600600687047F8B5DFF844060068017811F07F0123
+:201CE00004D1417A01F0DF0141724FE0022901BF41880029017900294AD1417921F08005B6
+:201D0000DFF82C460A0654F825204CBF02F0300202F44052DFF808361B789D4238D2002A67
+:201D20001CBF807A002833D0080654F825000BD500F03000102825D12846FFF7D1FA302176
+:201D40002846FFF778FA1DE000F44050B0F5805F18D148F280064BF68F7745B900F0BDFA13
+:201D60002068384080F44050304320600AE02846FFF7A4FA54F82500384080F44050304320
+:201D800044F82500FFF7A1FF406980470020F2BD0220F2BD38B5DFF884050268537923F0A6
+:201DA0008000DFF88C151C0651F820404CBF04F0300404F44054DFF868552D78A84206D2A6
+:201DC000558825B9002C1CBF927A002A01D1022032BD48F280021B0651F8203005D548F69A
+:201DE000BF74234083F0100304E04BF68F74234083F480531A4341F82020FFF766FF8069D8
+:201E00008047002032BD80B5DFF810050068417A41F020014172FFF758FFC0698047002046
+:201E200002BDDFF8F8241268538A20B98888C01A108200207047086818187047F8B5DFF892
+:201E4000DC54286800F110042688A168080018BF002E14D0A088864288BF0646304688474D
+:201E600007462088801B20806088301860800020FFF750FA324601463846FFF7BCF9DFF803
+:201E8000B464208850B1DFF8B0044FF44051018000210020FFF745FA3020308028682188F2
+:201EA000A288914228BF032101D211B105210172F1BD06210172DFF88404006880B2DFF8D4
+:201EC0008014002241F8102030203080F1BD2DE9F843DFF84844206800F110063188DFF862
+:201EE0005454002904BF007A042816D1DFF85404017801290DD1DFF84414096889B2DFF85F
+:201F00004024002342F8113030212980042703702CE007271020288028E0B6F8048088450E
+:201F200005D30427414588BF4146884600E002274046B168884781460020FFF7EAF94246BD
+:201F400001464846FFF742F941460020FFF7E9F93088A0EB08003080708840447080302045
+:201F60002880DFF8D4034FF44051018020680772BDE8F18338B5DFF8A44320684578017833
+:201F80007F22114238D1092D02D1FFF70DFE47E0052D1BD1C17880294FD28178002901BF10
+:201FA00081880029807A002847D10620DFF88C13096889B2DFF88823002342F81130DFF876
+:201FC000741330220A802168087231BD032D08D1C178012904BF8088002823D1FFF713FF52
+:201FE0001EE0012D04BFC17801291BD18188C9B9407A80060DD415E001F07F00012804D194
+:020000040800F2
+:202000000B2D0FD1FFF7FAFD0AE002280AD1012D02D1FFF75EFE03E0032D03D1FFF7BAFEE4
+:202020000028C2D02846BF49096849698847032808BF0920C7D00028B7D00820C3E738B55E
+:20204000B64D28684178B74C062913D101787F2211422AD18078012802D12068C16968E0C8
+:20206000022802D12068016A63E003281DD12068416A5EE000293DD14188002904BFC1886E
+:20208000022912D1017981B901787F22114204BF8288002A2CD001F07F02012A10D100F0B0
+:2020A00089F810B92868807A10BB28684078216809698847032845D128680921017231BD13
+:2020C00001F07F010229F0D1407900F00F0100F0700200F074F84CBF00F0300000F440507D
+:2020E0008F4B1B789942E0D2002ADED10028DCD095491EE0082905D100787F210842D4D14F
+:20210000924916E00A2902BF017801F07F010129CBD1817A0029C8D04188002901BF017962
+:202120000029C1880129C0D100F044F80028BCD187490800B9D028680022428281610020B8
+:202140008847002029680A8A4FF6FF739A4208BF092004D0022818BF002A02D10820087274
+:2021600031BD087800061ED5C88800902368009C944202D2009808820FE082420DD293F808
+:202180002C00704C824238BF002005D392FBF0F500FB152008B90120207093F82C008882CF
+:2021A000BDE8314093E60320087263484FF44051018031BD002140792268926910475C4BA8
+:2021C000000653F82100704738B55C48006880B2604931F81000400000F1804000F5C040E3
+:2021E0004E4C21680A7A092A14D010F8012B0A70216810F8012B4A70851C35F8040BFFF729
+:20220000E1F8216848802888FFF7DCF821688880A888C8802068012101722068C08810B95B
+:20222000FFF7A8FE01E0FFF70AFFBDE831403EE010B53A4C2068017A022918BF042904D19C
+:20224000FFF745FE2068007A14E0062911D14178052902BF01787F22114206D1C07800F02A
+:2022600042F8FFF732FD006A80472E48006880688047082017E010B5284C2068007A0228BD
+:2022800018BF04280ED0032818BF052804D1FFF7D5FD2068007A06E0072803D121480068D5
+:2022A000C0688047082021680872BDE8104080B500F013F819480068017A082906D11E492C
+:2022C0004FF480520A801B4910220A80007A092801D1012002BD002002BD1F4890F82C10D8
+:2022E0000020FFF725B870B50D4909780022104B48F68F760BE0D4B253F824503540254322
+:2023000045F4004545F0800543F82450521C8A42F1D340F080001149086070BDBC2C002031
+:20232000E0010020C02C0020082D0020C42C0020005C00400E2D00200C2D0020505C0040EF
+:2023400004600040172D0020431C0008911B0008DB1B000808600040D80000204C5C0040D4
+:2023600070470000F8B58478303CE4B20A2C38BF2246C478303CE4B20A2C38BF234600781A
+:202380003038C0B20A2838BF01460024534818250FF2A016271805FB014C1CF806C087F85B
+:2023A00060C005FB024C1CF806C087F890C005FB034C1CF806C087F8A8C0641C182CE9DB6E
+:2023C00000240C2201460C206043C0B200F004F8641C082CF5DBF1BD70B504460D461646E7
+:2023E000002100F04BF8761C2946F0B200F035F805460121204600F041F82946F0B2BDE817
+:2024000070402AE03749086037483C2202700968C9B2334800F09AB910B58CB000A80FF277
+:20242000DC013022FEF790FD2E2200F03CF82F4C4FF48071204600F006FA0220FEF7C4FD9A
+:202440004FF48071204600F0FCF90220FEF7BCFD2E20FFF7D7FF0CB010BD10B50C4620490A
+:2024600040220A70012203E014F8013B5354521C8242F9DBFFF7C6FF204610BD30B583B07F
+:2024800000AA0FF2A80330CB30C28DF80500012904BFB1208DF80100082200F004F80820ED
+:2024A000FFF7B0FF37BD00A90D48FEF73DBD10B500212020FFF7E2FF094C00F019F88020A3
+:2024C000FFF7A0FF01212020FFF7D8FF00F010F88020BDE8104095E700000000000000200F
+:2024E00034260020FC2C0020162D002000080140402020707F21601CFEF762BD80AE80D5CB
+:20250000805280A8800F80C880D38000804080A1808D801480DA8002808180E080D980F18E
+:2025200080DB803080A480A680AF000080B080218020807F00E010080810E00000000000B7
+:20254000000F102020100F0000000000001010F800000000000000000020203F2020000026
+:2025600000000000007008080888700000000000003028242221300000000000003008882C
+:2025800088483000000000000018202020110E00000000000000C02010F8000000000000BC
+:2025A00000070424243F24000000000000F8088888080800000000000019212020110E00AC
+:2025C0000000000000E010888818000000000000000F112020110E0000000000003808081C
+:2025E000C8380800000000000000003F000000000000000000708808088870000000000094
+:20260000001C222121221C000000000000E010080810E000000000000000312222110F0077
+:20262000000000000000000000000000000000000030300000000000000000007047424AF7
+:20264000012903D10146104600F0FBB819B90146104600F0F8B8704780B501210820FFF701
+:202660008AF8C020ADF8000014208DF8030003208DF8020000A9344800F07EF800F00EF86C
+:2026800000F055F800F056F800F057F8002100F04FF800F052F800F001F801BD00214020C6
+:2026A000CDE780B5FFF7FAFF002100F041F800F044F800F03FF800F040F800F038F800F06D
+:2026C0003CF8FFF7EBFF0520BDE80240B6E738B50446082508E000F02BF800F02EF800F0D8
+:2026E00029F800F02AF864002846451EC0B230B1FFF7D4FF20064CBF01210021EBE7FFF71A
+:20270000CDFF00F014F8FF2400F017F800F017F848B900F00FF800F010F8FFF7BFFF00F03C
+:202720000CF8012032BD641EEED1002032BD0121802084E70121402081E705207EE78021F3
+:20274000014800F077B80000000C014070B504460D461646FFF780FF7000C0B201E014F862
+:20276000010BFFF7B4FF2846451EC0B20028F6D1BDE8704095E700002DE9F0410022CC78F4
+:2027800004F00F03E40644BF8C7823430C8801250F26E7B217B3D0F800C005FA02F7BE4606
+:2027A0000EEA0408F04514D14FEA820E06FA0EF82CEA080C03FA0EFE4EEA0C0C91F803E03D
+:2027C000BEF1280F08BF476103D0BEF1480F08BF0761521C082AE0D3C0F800C0B4F5807F29
+:2027E00026D3D0F804C0002202F1080705FA07F7BE460EEA0408F04515D14FEA820E06FA47
+:202800000EF82CEA080C03FA0EFE4EEA0C0C91F803E0BEF1280F08BF476191F803E0BEF153
+:20282000480F08BF0761521C082ADDD3C0F804C0BDE8F08100228068084218BF012210468C
+:2028400070470161704741617047000080B500F0F8F88B48006800218172FEF769FC8948C0
+:20286000002141604FF40441874A1180016087480021016001BD10B58548002181728048CE
+:2028800000688449C97941720020FEF7C3FC4FF400710020FEF7C5FC20210020FEF7CBFC93
+:2028A00018210020FEF72EFD7B4C00F042F858210020FEF726FD0020FEF7F1FC0020FEF7E6
+:2028C000E2FC00210120FEF7ACFC98210120FEF718FD20210120FEF7AEFC00210120FEF71F
+:2028E000BBFC00210220FEF79CFCD8210220FEF709FD94F82C100220FEF71AFD4FF4405171
+:202900000220FEF7A9FC00210220FEF794FC00F010F80020FEF7B7FC0020FFF7E4FC5B48DA
+:20292000012101605D485E4901605E480021017010BD94F82C100020FEF7FABC50480068CF
+:20294000807A00B9704780B55048052101600120FEF7C6FC0220FEF7B1FC524800210170F1
+:2029600001BD4E4800684E4988421CBF0220FEF769BE704745480421016070477047704732
+:2029800080B53F4909680A7802F07F02212A08BFFE280BD14888002801BF88880028C888C0
+:2029A000012803D10FF28900020001D1022002BD88610020488200F03BF8002002BD80B5D1
+:2029C0002F4909680A7802F07F02212A08BFFF2815D14888002804BF888800280FD1C888D7
+:2029E00068B90120FEF77CFC0220FEF767FC2B482B4901602B4800210170002002BD022060
+:202A000002BD00290CBF0028022070472649FFF708BA2649FFF705BA19490968C978062974
+:202A200001DB00207047224A02EBC101FFF7F9B928B91348006801210182002070471D489B
+:202A400070471D4801684268806801B9704710B51A4B99700C0A1C710C0C9C71090E197251
+:202A60009A72110A1973110C9973110E19749874010A1975010C9975000E187610BD0000A5
+:202A8000BC2C0020405C0040142D0020042D0020A02C0020E42C0008D8000020742C0020E4
+:202AA00055534243942C0020C8010020D001002008010020002D0020E8F7FF1F5401002047
+:202AC0002DE9F84F0020ADF8000040F68F7848F60F7B48F28006444F444CDFF81491DFF899
+:202AE00014A14BF6BF7525E054F82010ADF80010BDF8001009040BD554F8201008EA010154
+:202B000044F820103C4901EB800050F8040C8047BDF8000000060DD599F8000054F820108F
+:202B20000BEA010144F82010344901EB800050F8040C8047606CAAF80000000452D5BAF8DF
+:202B4000000010F00F0089F80000CDD120683880388800F030007880388800F44050388033
+:202B60002068284080F4005080F0200030432060BAF80000C006206805D40BEA00002060D0
+:202B8000FFF756FB16E0ADF80000BDF80000000506D5206808EA00002060FFF715FB09E0D5
+:202BA000BDF800000004C5D5206808EA00002060FFF761FB206828403988C90448BF80F47D
+:202BC00080503988890448BF80F400507988C90648BF80F010007988890648BF80F020008E
+:202BE00030432060BDE8F18F0C2D0020005C0040182D0020122D00208C01002070010020C6
+:202C00002E48016841F00101016041682C4A1140416001682B4A11400160016821F4802181
+:202C20000160416821F4FE0141604FF41F0181600021026842F4803202600268491C920358
+:202C400002D4B1F5A06FF8D10168890330D51E490A6842F010020A600A68920892000A6097
+:202C60000A6842F002020A604168416041684160416841F480614160416821F47C11416062
+:202C8000416841F4E8114160016841F08071016001688901FCD541688908890041604168FF
+:202CA00041F002014160416801F00C010829FAD106484FF000610160704700000010024044
+:202CC0000000FFF8FFFFF6FE0020024008ED00E0120100020000004083042057000201027C
+:202CE0000301000009022000010100C0320904000002080650040705810240000007050263
+:202D000002400000040309042603530054004D006900630072006F0065006C0065006300FA
+:202D2000740072006F006E0069006300730000002603530054004D003300320020004D00A2
+:202D40006100730073002000530074006F007200610067006500000010035300540020005D
+:202D60004D00610073007300FEF760F9FEF7BCF91A48006880070ED5FEF773F8184801686A
+:202D8000184A1140B1F1005F04D144680068FEF749F9A047FEE70A20FEF716F90020FEF750
+:202DA00020F9C820FEF710F90120FEF71AF90020FEF780F9FEF7D4F9FDF7BAF9FFF72CFBD7
+:202DC000FFF775FB0FF22000FFF7CCFAFEF71EFDFDF7A8FAFDF7B7FBF8E70000080C014030
+:202DE000004000080000FF2F332E34350000000070B50D4C0D4D286820800D4E20883188CF
+:202E00000840400505D50B48406880474FF6FF302860208831880840000444BFBDE8704088
+:202E2000FFF74EBE70BD0000122D0020445C0040142D0020D8000020FEF7CABAFEF7E9BABA
+:202E400010B5074979441831064C7C44163404E0081D0A68511888470146A142F8D110BD88
+:202E6000080000002800000037E1FFFF302B0000EC0100200000000083E0FFFFEC01000056
+:202E80009401000000000020000000007047FEE7FEE7FEE7FEE77047704770477047FFF760
+:202EA000A7BF000000F009F8002801D0FFF7C8FF0020FFF759FF00F002F80120704700F0E5
+:202EC00001B800000746384600F002F8FBE70000C046C046024A11001820ABBEFBE700BFF7
+:202EE000260002000148804701480047012C0008F52E0008C046C046C046C046FFF7D2FFCB
+:202F0000FFF7C4BFFFF7C3BFFFF7C2BFFFF7C1BFFFF7C0BFFFF7BFBFFFF7BEBFFFF7BDBF05
+:202F2000FFF7BCBFFFF7FEBFFFF7FEBFFFF7FEBFFFF7FEBFFFF7FEBFFFF7FEBFFFF7FEBF3B
+:202F4000FFF7FEBFFFF7FEBFFFF7FEBFFFF7FEBFFFF7FEBFFFF7FEBFFFF7FEBFFFF7FEBFD9
+:202F6000FFF7FEBFFFF7FEBFFFF7FEBFFFF7FEBFFFF7FEBFFFF793BFFFF7FEBFFFF7FEBF24
+:202F8000FFF7FEBFFFF7FEBFFFF7FEBFFFF7FEBFFFF7FEBFFFF7FEBFFFF7FEBFFFF7FEBF99
+:202FA000FFF7FEBFFFF7FEBFFFF7FEBFFFF7FEBFFFF7FEBFFFF7FEBFFFF7FEBFFFF7FEBF79
+:202FC000FFF7FEBFFFF7FEBFFFF7FEBFFFF7FEBFFFF7FEBFFFF7FEBFFFF7FEBFFFF7FEBF59
+:202FE000FFF7FEBFFFF7FEBFFFF7FEBFFFF7FEBFFFF7FEBFFFF7FEBFFFF7FEBFFFF7FEBF39
+:20300000FFF7FEBFFFF7FEBFFFF7FEBFFFF7FEBFFFF7FEBF04FC040404040C0810E000001D
+:20302000407F404040406020180F000004FC8484848484E40C100000407F40000000000394
+:203040000000000004FC04000000000004FC0400001F204040404040201F000000000000AA
+:20306000606000000000000000000000606000000000000000780404040404887800000044
+:20308000006050484442414070000000000000000000000000000000006060000000000001
+:2030A0000000000000E018080404040818E00000000F302040404020300F0000000000087E
+:2030C00008FC00000000000000000040407F4040400000000000000000000000000000002D
+:2030E0000000000000000000000000004D280008772800087D2900087F290008812900089C
+:20310000BF290008032A00080D2A0008132A0008192A00080000000040000000042D000842
+:2031200004000000082D000826000000302D000826000000540100201A000000582D000881
+:2031400010000000612300083D2900086123000861230008612300086329000861230008A1
+:2031600061230008752900081A03530054004D003300320031003000000000000000000046
+:2031800000000000392E000861230008612300086123000861230008612300086123000878
+:2031A000612300083D2E0008612300086123000861230008612300086123000870000000E4
+:2031C0000000000A000000000000000000000000000000080000000002000000D02C0008D7
+:2031E00012000000E42C000820000000000600000000000003010000030000000100000077
+:20320000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFCE
+:20322000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFAE
+:20324000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF8E
+:20326000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF6E
+:20328000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF4E
+:2032A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF2E
+:2032C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF0E
+:2032E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEE
+:20330000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFCD
+:20332000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFAD
+:20334000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF8D
+:20336000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF6D
+:20338000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF4D
+:2033A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF2D
+:2033C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF0D
+:2033E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFED
+:20340000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFCC
+:20342000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFAC
+:20344000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF8C
+:20346000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF6C
+:20348000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF4C
+:2034A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF2C
+:2034C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF0C
+:2034E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEC
+:20350000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFCB
+:20352000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFAB
+:20354000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF8B
+:20356000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF6B
+:20358000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF4B
+:2035A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF2B
+:2035C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF0B
+:2035E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEB
+:20360000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFCA
+:20362000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFAA
+:20364000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF8A
+:20366000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF6A
+:20368000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF4A
+:2036A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF2A
+:2036C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF0A
+:2036E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEA
+:20370000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFC9
+:20372000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFA9
+:20374000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF89
+:20376000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF69
+:20378000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF49
+:2037A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF29
+:2037C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF09
+:2037E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE9
+:20380000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFC8
+:20382000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFA8
+:20384000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF88
+:20386000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF68
+:20388000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF48
+:2038A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF28
+:2038C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF08
+:2038E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE8
+:20390000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFC7
+:20392000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFA7
+:20394000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF87
+:20396000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF67
+:20398000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF47
+:2039A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF27
+:2039C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF07
+:2039E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE7
+:203A0000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFC6
+:203A2000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFA6
+:203A4000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF86
+:203A6000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF66
+:203A8000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF46
+:203AA000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF26
+:203AC000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF06
+:203AE000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE6
+:203B0000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFC5
+:203B2000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFA5
+:203B4000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF85
+:203B6000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF65
+:203B8000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF45
+:203BA000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF25
+:203BC000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF05
+:203BE000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE5
+:203C0000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFC4
+:203C2000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFA4
+:203C4000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF84
+:203C6000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF64
+:203C8000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF44
+:203CA000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF24
+:203CC000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF04
+:203CE000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE4
+:203D0000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFC3
+:203D2000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFA3
+:203D4000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF83
+:203D6000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF63
+:203D8000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF43
+:203DA000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF23
+:203DC000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF03
+:203DE000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE3
+:203E0000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFC2
+:203E2000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFA2
+:203E4000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF82
+:203E6000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF62
+:203E8000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF42
+:203EA000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF22
+:203EC000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF02
+:203EE000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE2
+:203F0000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFC1
+:203F2000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFA1
+:203F4000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF81
+:203F6000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF61
+:203F8000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF41
+:203FA000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF21
+:203FC000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF01
+:203FE000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE1
+:00000001FF

Development Resources/TS80/TS80.ioc

@@ -0,0 +1,348 @@
+#MicroXplorer Configuration settings - do not modify
+ADC1.Channel-31\#ChannelRegularConversion=ADC_CHANNEL_4
+ADC1.Channel-32\#ChannelInjectedConversion=ADC_CHANNEL_2
+ADC1.Channel-33\#ChannelInjectedConversion=ADC_CHANNEL_2
+ADC1.Channel-34\#ChannelInjectedConversion=ADC_CHANNEL_2
+ADC1.Channel-35\#ChannelInjectedConversion=ADC_CHANNEL_2
+ADC1.ContinuousConvMode=DISABLE
+ADC1.DataAlign=ADC_DATAALIGN_RIGHT
+ADC1.DiscontinuousConvMode=DISABLE
+ADC1.EnableAnalogWatchDog=false
+ADC1.EnableRegularConversion=ENABLE
+ADC1.ExternalTrigConv=ADC_SOFTWARE_START
+ADC1.ExternalTrigInjecConv=ADC_INJECTED_SOFTWARE_START
+ADC1.IPParameters=Rank-31\#ChannelRegularConversion,Channel-31\#ChannelRegularConversion,SamplingTime-31\#ChannelRegularConversion,NbrOfConversionFlag,master,Rank-32\#ChannelInjectedConversion,Channel-32\#ChannelInjectedConversion,SamplingTime-32\#ChannelInjectedConversion,InjectedOffset-32\#ChannelInjectedConversion,Rank-33\#ChannelInjectedConversion,Channel-33\#ChannelInjectedConversion,SamplingTime-33\#ChannelInjectedConversion,InjectedOffset-33\#ChannelInjectedConversion,Rank-34\#ChannelInjectedConversion,Channel-34\#ChannelInjectedConversion,SamplingTime-34\#ChannelInjectedConversion,InjectedOffset-34\#ChannelInjectedConversion,Rank-35\#ChannelInjectedConversion,Channel-35\#ChannelInjectedConversion,SamplingTime-35\#ChannelInjectedConversion,InjectedOffset-35\#ChannelInjectedConversion,InjNumberOfConversion,DataAlign,ScanConvMode,ContinuousConvMode,DiscontinuousConvMode,EnableRegularConversion,NbrOfConversion,ExternalTrigConv,ExternalTrigInjecConv,InjectedConvMode,EnableAnalogWatchDog
+ADC1.InjNumberOfConversion=4
+ADC1.InjectedConvMode=None
+ADC1.InjectedOffset-32\#ChannelInjectedConversion=0
+ADC1.InjectedOffset-33\#ChannelInjectedConversion=0
+ADC1.InjectedOffset-34\#ChannelInjectedConversion=0
+ADC1.InjectedOffset-35\#ChannelInjectedConversion=0
+ADC1.NbrOfConversion=1
+ADC1.NbrOfConversionFlag=1
+ADC1.Rank-31\#ChannelRegularConversion=1
+ADC1.Rank-32\#ChannelInjectedConversion=1
+ADC1.Rank-33\#ChannelInjectedConversion=2
+ADC1.Rank-34\#ChannelInjectedConversion=3
+ADC1.Rank-35\#ChannelInjectedConversion=4
+ADC1.SamplingTime-31\#ChannelRegularConversion=ADC_SAMPLETIME_1CYCLE_5
+ADC1.SamplingTime-32\#ChannelInjectedConversion=ADC_SAMPLETIME_1CYCLE_5
+ADC1.SamplingTime-33\#ChannelInjectedConversion=ADC_SAMPLETIME_1CYCLE_5
+ADC1.SamplingTime-34\#ChannelInjectedConversion=ADC_SAMPLETIME_1CYCLE_5
+ADC1.SamplingTime-35\#ChannelInjectedConversion=ADC_SAMPLETIME_1CYCLE_5
+ADC1.ScanConvMode=ADC_SCAN_ENABLE
+ADC1.master=1
+ADC2.Channel-0\#ChannelRegularConversion=ADC_CHANNEL_3
+ADC2.Channel-1\#ChannelInjectedConversion=ADC_CHANNEL_3
+ADC2.Channel-2\#ChannelInjectedConversion=ADC_CHANNEL_3
+ADC2.Channel-3\#ChannelInjectedConversion=ADC_CHANNEL_3
+ADC2.Channel-4\#ChannelInjectedConversion=ADC_CHANNEL_3
+ADC2.ContinuousConvMode=DISABLE
+ADC2.DataAlign=ADC_DATAALIGN_RIGHT
+ADC2.DiscontinuousConvMode=DISABLE
+ADC2.EnableAnalogWatchDog=false
+ADC2.EnableRegularConversion=ENABLE
+ADC2.ExternalTrigConv=ADC_SOFTWARE_START
+ADC2.IPParameters=Rank-0\#ChannelRegularConversion,Channel-0\#ChannelRegularConversion,SamplingTime-0\#ChannelRegularConversion,NbrOfConversionFlag,Rank-1\#ChannelInjectedConversion,Channel-1\#ChannelInjectedConversion,SamplingTime-1\#ChannelInjectedConversion,InjectedOffset-1\#ChannelInjectedConversion,Rank-2\#ChannelInjectedConversion,Channel-2\#ChannelInjectedConversion,SamplingTime-2\#ChannelInjectedConversion,InjectedOffset-2\#ChannelInjectedConversion,Rank-3\#ChannelInjectedConversion,Channel-3\#ChannelInjectedConversion,SamplingTime-3\#ChannelInjectedConversion,InjectedOffset-3\#ChannelInjectedConversion,Rank-4\#ChannelInjectedConversion,Channel-4\#ChannelInjectedConversion,SamplingTime-4\#ChannelInjectedConversion,InjectedOffset-4\#ChannelInjectedConversion,InjNumberOfConversion,DataAlign,ScanConvMode,ContinuousConvMode,DiscontinuousConvMode,EnableRegularConversion,NbrOfConversion,ExternalTrigConv,EnableAnalogWatchDog
+ADC2.InjNumberOfConversion=0
+ADC2.InjectedOffset-1\#ChannelInjectedConversion=0
+ADC2.InjectedOffset-2\#ChannelInjectedConversion=0
+ADC2.InjectedOffset-3\#ChannelInjectedConversion=0
+ADC2.InjectedOffset-4\#ChannelInjectedConversion=0
+ADC2.NbrOfConversion=1
+ADC2.NbrOfConversionFlag=1
+ADC2.Rank-0\#ChannelRegularConversion=1
+ADC2.Rank-1\#ChannelInjectedConversion=1
+ADC2.Rank-2\#ChannelInjectedConversion=2
+ADC2.Rank-3\#ChannelInjectedConversion=3
+ADC2.Rank-4\#ChannelInjectedConversion=4
+ADC2.SamplingTime-0\#ChannelRegularConversion=ADC_SAMPLETIME_1CYCLE_5
+ADC2.SamplingTime-1\#ChannelInjectedConversion=ADC_SAMPLETIME_1CYCLE_5
+ADC2.SamplingTime-2\#ChannelInjectedConversion=ADC_SAMPLETIME_1CYCLE_5
+ADC2.SamplingTime-3\#ChannelInjectedConversion=ADC_SAMPLETIME_1CYCLE_5
+ADC2.SamplingTime-4\#ChannelInjectedConversion=ADC_SAMPLETIME_1CYCLE_5
+ADC2.ScanConvMode=ADC_SCAN_DISABLE
+Dma.I2C1_RX.0.Direction=DMA_PERIPH_TO_MEMORY
+Dma.I2C1_RX.0.Instance=DMA1_Channel7
+Dma.I2C1_RX.0.MemDataAlignment=DMA_MDATAALIGN_BYTE
+Dma.I2C1_RX.0.MemInc=DMA_MINC_ENABLE
+Dma.I2C1_RX.0.Mode=DMA_NORMAL
+Dma.I2C1_RX.0.PeriphDataAlignment=DMA_PDATAALIGN_BYTE
+Dma.I2C1_RX.0.PeriphInc=DMA_PINC_DISABLE
+Dma.I2C1_RX.0.Priority=DMA_PRIORITY_MEDIUM
+Dma.I2C1_RX.0.RequestParameters=Instance,Direction,PeriphInc,MemInc,PeriphDataAlignment,MemDataAlignment,Mode,Priority
+Dma.I2C1_TX.1.Direction=DMA_MEMORY_TO_PERIPH
+Dma.I2C1_TX.1.Instance=DMA1_Channel6
+Dma.I2C1_TX.1.MemDataAlignment=DMA_MDATAALIGN_BYTE
+Dma.I2C1_TX.1.MemInc=DMA_MINC_ENABLE
+Dma.I2C1_TX.1.Mode=DMA_NORMAL
+Dma.I2C1_TX.1.PeriphDataAlignment=DMA_PDATAALIGN_BYTE
+Dma.I2C1_TX.1.PeriphInc=DMA_PINC_DISABLE
+Dma.I2C1_TX.1.Priority=DMA_PRIORITY_MEDIUM
+Dma.I2C1_TX.1.RequestParameters=Instance,Direction,PeriphInc,MemInc,PeriphDataAlignment,MemDataAlignment,Mode,Priority
+Dma.Request0=I2C1_RX
+Dma.Request1=I2C1_TX
+Dma.RequestsNb=2
+FREERTOS.FootprintOK=true
+FREERTOS.INCLUDE_vTaskDelete=0
+FREERTOS.IPParameters=Tasks01,configTICK_RATE_HZ,configMAX_PRIORITIES,configMINIMAL_STACK_SIZE,configTOTAL_HEAP_SIZE,INCLUDE_vTaskDelete,FootprintOK
+FREERTOS.Tasks01=GUITask,0,512,StartGUITask,Default,NULL,Dynamic,NULL,NULL;PIDTask,0,256,StartPIDTask,Default,NULL,Dynamic,NULL,NULL;ROTTask,-2,256,StartRotationTask,Default,NULL,Dynamic,NULL,NULL
+FREERTOS.configMAX_PRIORITIES=4
+FREERTOS.configMINIMAL_STACK_SIZE=256
+FREERTOS.configTICK_RATE_HZ=100
+FREERTOS.configTOTAL_HEAP_SIZE=10240
+File.Version=6
+I2C1.DutyCycle=I2C_DUTYCYCLE_2
+I2C1.I2C_Mode=I2C_Fast
+I2C1.IPParameters=I2C_Mode,DutyCycle
+IWDG.IPParameters=Prescaler
+IWDG.Prescaler=IWDG_PRESCALER_256
+KeepUserPlacement=false
+Mcu.Family=STM32F1
+Mcu.IP0=ADC1
+Mcu.IP1=ADC2
+Mcu.IP10=TIM3
+Mcu.IP2=DMA
+Mcu.IP3=FREERTOS
+Mcu.IP4=I2C1
+Mcu.IP5=IWDG
+Mcu.IP6=NVIC
+Mcu.IP7=RCC
+Mcu.IP8=SYS
+Mcu.IP9=TIM2
+Mcu.IPNb=11
+Mcu.Name=STM32F103T(8-B)Ux
+Mcu.Package=VFQFPN36
+Mcu.Pin0=PA0-WKUP
+Mcu.Pin1=PA2
+Mcu.Pin10=PA11
+Mcu.Pin11=PA12
+Mcu.Pin12=PA13
+Mcu.Pin13=PA14
+Mcu.Pin14=PA15
+Mcu.Pin15=PB3
+Mcu.Pin16=PB4
+Mcu.Pin17=PB5
+Mcu.Pin18=PB6
+Mcu.Pin19=PB7
+Mcu.Pin2=PA3
+Mcu.Pin20=VP_FREERTOS_VS_ENABLE
+Mcu.Pin21=VP_IWDG_VS_IWDG
+Mcu.Pin22=VP_SYS_VS_ND
+Mcu.Pin23=VP_SYS_VS_tim1
+Mcu.Pin24=VP_TIM2_VS_ClockSourceINT
+Mcu.Pin25=VP_TIM2_VS_no_output1
+Mcu.Pin26=VP_TIM2_VS_no_output3
+Mcu.Pin27=VP_TIM3_VS_ClockSourceINT
+Mcu.Pin28=VP_TIM3_VS_no_output4
+Mcu.Pin3=PA4
+Mcu.Pin4=PA6
+Mcu.Pin5=PB0
+Mcu.Pin6=PB1
+Mcu.Pin7=PA8
+Mcu.Pin8=PA9
+Mcu.Pin9=PA10
+Mcu.PinsNb=29
+Mcu.ThirdPartyNb=0
+Mcu.UserConstants=
+Mcu.UserName=STM32F103T8Ux
+MxCube.Version=4.26.0
+MxDb.Version=DB.4.0.260
+NVIC.BusFault_IRQn=true\:0\:0\:false\:false\:true\:false\:true
+NVIC.DMA1_Channel6_IRQn=true\:5\:0\:false\:false\:true\:true\:true
+NVIC.DMA1_Channel7_IRQn=true\:5\:0\:false\:false\:true\:true\:true
+NVIC.DebugMonitor_IRQn=true\:0\:0\:false\:false\:true\:false\:true
+NVIC.HardFault_IRQn=true\:0\:0\:false\:false\:true\:false\:true
+NVIC.I2C1_ER_IRQn=true\:5\:0\:false\:false\:true\:true\:true
+NVIC.I2C1_EV_IRQn=true\:5\:0\:false\:false\:true\:true\:true
+NVIC.MemoryManagement_IRQn=true\:0\:0\:false\:false\:true\:false\:true
+NVIC.NonMaskableInt_IRQn=true\:0\:0\:false\:false\:true\:false\:true
+NVIC.PendSV_IRQn=true\:15\:0\:false\:false\:false\:true\:true
+NVIC.PriorityGroup=NVIC_PRIORITYGROUP_4
+NVIC.SVCall_IRQn=true\:0\:0\:false\:false\:false\:false\:true
+NVIC.SysTick_IRQn=true\:15\:0\:false\:false\:true\:true\:true
+NVIC.TIM1_UP_IRQn=true\:0\:0\:false\:false\:true\:false\:true
+NVIC.TimeBase=TIM1_UP_IRQn
+NVIC.TimeBaseIP=TIM1
+NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:false\:true
+PA0-WKUP.GPIOParameters=GPIO_Label
+PA0-WKUP.GPIO_Label=RM
+PA0-WKUP.Locked=true
+PA0-WKUP.Signal=GPIO_Output
+PA10.GPIOParameters=GPIO_Label
+PA10.GPIO_Label=QC_DM_11K
+PA10.Locked=true
+PA10.Signal=GPIO_Output
+PA11.GPIOParameters=GPIO_Label
+PA11.GPIO_Label=USB_DM
+PA11.Locked=true
+PA11.Signal=GPIO_Analog
+PA12.GPIOParameters=GPIO_Label
+PA12.GPIO_Label=USB_DP
+PA12.Locked=true
+PA12.Signal=GPIO_Analog
+PA13.GPIOParameters=GPIO_Label
+PA13.GPIO_Label=QC_DP_SENSE
+PA13.Locked=true
+PA13.Signal=GPIO_Input
+PA14.GPIOParameters=GPIO_Label
+PA14.GPIO_Label=QC_DM_SENSE
+PA14.Locked=true
+PA14.Signal=GPIO_Input
+PA15.GPIOParameters=GPIO_Label
+PA15.GPIO_Label=OLED_RESET
+PA15.Locked=true
+PA15.Signal=GPIO_Output
+PA2.GPIOParameters=GPIO_Label
+PA2.GPIO_Label=ADC_VIN
+PA2.Locked=true
+PA2.Signal=ADCx_IN2
+PA3.GPIOParameters=GPIO_Label
+PA3.GPIO_Label=ADC_TIP
+PA3.Locked=true
+PA3.Signal=ADCx_IN3
+PA4.GPIOParameters=GPIO_Label
+PA4.GPIO_Label=ADC_TMP36
+PA4.Locked=true
+PA4.Signal=ADCx_IN4
+PA6.GPIOParameters=GPIO_Label
+PA6.GPIO_Label=PWM Out
+PA6.Locked=true
+PA6.Signal=S_TIM3_CH1
+PA8.GPIOParameters=GPIO_Label
+PA8.GPIO_Label=QC_DM_3K
+PA8.Locked=true
+PA8.Signal=GPIO_Output
+PA9.GPIOParameters=GPIO_Label
+PA9.GPIO_Label=MODEL_SEL
+PA9.Locked=true
+PA9.Signal=GPIO_Input
+PB0.GPIOParameters=GPIO_Label
+PB0.GPIO_Label=KEY_A
+PB0.Locked=true
+PB0.Signal=GPIO_Input
+PB1.GPIOParameters=GPIO_Label
+PB1.GPIO_Label=KEY_B
+PB1.Locked=true
+PB1.Signal=GPIO_Input
+PB3.GPIOParameters=GPIO_Label
+PB3.GPIO_Label=QC_DP_3K
+PB3.Locked=true
+PB3.Signal=GPIO_Output
+PB4.GPIOParameters=GPIO_Label
+PB4.GPIO_Label=IMU_INT2
+PB4.Locked=true
+PB4.Signal=GPXTI4
+PB5.GPIOParameters=GPIO_Label
+PB5.GPIO_Label=IMU_INT1
+PB5.Locked=true
+PB5.Signal=GPXTI5
+PB6.GPIOParameters=GPIO_Label
+PB6.GPIO_Label=SCL
+PB6.Mode=I2C
+PB6.Signal=I2C1_SCL
+PB7.GPIOParameters=GPIO_Label
+PB7.GPIO_Label=SDA
+PB7.Mode=I2C
+PB7.Signal=I2C1_SDA
+PCC.Checker=false
+PCC.Line=STM32F103
+PCC.MCU=STM32F103T(8-B)Ux
+PCC.PartNumber=STM32F103T8Ux
+PCC.Seq0=0
+PCC.Series=STM32F1
+PCC.Temperature=25
+PCC.Vdd=3.3
+PinOutPanel.RotationAngle=0
+ProjectManager.AskForMigrate=true
+ProjectManager.BackupPrevious=false
+ProjectManager.CompilerOptimize=3
+ProjectManager.ComputerToolchain=false
+ProjectManager.CoupleFile=false
+ProjectManager.CustomerFirmwarePackage=
+ProjectManager.DefaultFWLocation=true
+ProjectManager.DeletePrevious=true
+ProjectManager.DeviceId=STM32F103T8Ux
+ProjectManager.FirmwarePackage=STM32Cube FW_F1 V1.6.1
+ProjectManager.FreePins=true
+ProjectManager.HalAssertFull=false
+ProjectManager.HeapSize=0x200
+ProjectManager.KeepUserCode=true
+ProjectManager.LastFirmware=true
+ProjectManager.LibraryCopy=1
+ProjectManager.MainLocation=Src
+ProjectManager.PreviousToolchain=SW4STM32
+ProjectManager.ProjectBuild=false
+ProjectManager.ProjectFileName=TS80.ioc
+ProjectManager.ProjectName=TS80
+ProjectManager.StackSize=0x400
+ProjectManager.TargetToolchain=SW4STM32
+ProjectManager.ToolChainLocation=
+ProjectManager.UnderRoot=false
+ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-HAL-true,2-MX_DMA_Init-DMA-false-HAL-true,3-MX_I2C1_Init-I2C1-false-HAL-true,4-SystemClock_Config-RCC-false-HAL-true,5-MX_TIM3_Init-TIM3-false-HAL-true,6-MX_IWDG_Init-IWDG-false-HAL-true,7-MX_TIM2_Init-TIM2-false-HAL-true,8-MX_ADC1_Init-ADC1-false-HAL-true,9-MX_ADC2_Init-ADC2-false-HAL-true
+RCC.ADCFreqValue=8000000
+RCC.ADCPresc=RCC_ADCPCLK2_DIV8
+RCC.AHBFreq_Value=64000000
+RCC.APB1CLKDivider=RCC_HCLK_DIV16
+RCC.APB1Freq_Value=4000000
+RCC.APB1TimFreq_Value=8000000
+RCC.APB2Freq_Value=64000000
+RCC.APB2TimFreq_Value=64000000
+RCC.FCLKCortexFreq_Value=64000000
+RCC.FamilyName=M
+RCC.HCLKFreq_Value=64000000
+RCC.IPParameters=ADCFreqValue,ADCPresc,AHBFreq_Value,APB1CLKDivider,APB1Freq_Value,APB1TimFreq_Value,APB2Freq_Value,APB2TimFreq_Value,FCLKCortexFreq_Value,FamilyName,HCLKFreq_Value,MCOFreq_Value,PLLCLKFreq_Value,PLLMCOFreq_Value,PLLMUL,PLLSourceVirtual,SYSCLKFreq_VALUE,SYSCLKSource,TimSysFreq_Value,USBFreq_Value,USBPrescaler
+RCC.MCOFreq_Value=64000000
+RCC.PLLCLKFreq_Value=64000000
+RCC.PLLMCOFreq_Value=32000000
+RCC.PLLMUL=RCC_PLL_MUL16
+RCC.PLLSourceVirtual=RCC_PLLSOURCE_HSI_DIV2
+RCC.SYSCLKFreq_VALUE=64000000
+RCC.SYSCLKSource=RCC_SYSCLKSOURCE_PLLCLK
+RCC.TimSysFreq_Value=64000000
+RCC.USBFreq_Value=42666666.666666664
+RCC.USBPrescaler=RCC_USBCLKSOURCE_PLL_DIV1_5
+SH.ADCx_IN2.0=ADC1_IN2,IN2
+SH.ADCx_IN2.ConfNb=1
+SH.ADCx_IN3.0=ADC1_IN3,IN3
+SH.ADCx_IN3.1=ADC2_IN3,IN3
+SH.ADCx_IN3.ConfNb=2
+SH.ADCx_IN4.0=ADC1_IN4,IN4
+SH.ADCx_IN4.ConfNb=1
+SH.GPXTI4.0=GPIO_EXTI4
+SH.GPXTI4.ConfNb=1
+SH.GPXTI5.0=GPIO_EXTI5
+SH.GPXTI5.ConfNb=1
+SH.S_TIM3_CH1.0=TIM3_CH1,PWM Generation1 CH1
+SH.S_TIM3_CH1.ConfNb=1
+TIM2.Channel-PWM\ Generation1\ No\ Output=TIM_CHANNEL_1
+TIM2.Channel-PWM\ Generation3\ No\ Output=TIM_CHANNEL_3
+TIM2.IPParameters=Channel-PWM Generation1 No Output,Channel-PWM Generation3 No Output
+TIM3.Channel-Output\ Compare4\ No\ Output=TIM_CHANNEL_4
+TIM3.Channel-PWM\ Generation1\ CH1=TIM_CHANNEL_1
+TIM3.ClockDivision=TIM_CLOCKDIVISION_DIV4
+TIM3.IPParameters=Channel-PWM Generation1 CH1,OCFastMode_PWM-PWM Generation1 CH1,ClockDivision,Prescaler,Period,Channel-Output Compare4 No Output,OCMode_4,Pulse-Output Compare4 No Output
+TIM3.OCFastMode_PWM-PWM\ Generation1\ CH1=TIM_OCFAST_ENABLE
+TIM3.OCMode_4=TIM_OCMODE_ACTIVE
+TIM3.Period=65535
+TIM3.Prescaler=2000
+TIM3.Pulse-Output\ Compare4\ No\ Output=65000
+VP_FREERTOS_VS_ENABLE.Mode=Enabled
+VP_FREERTOS_VS_ENABLE.Signal=FREERTOS_VS_ENABLE
+VP_IWDG_VS_IWDG.Mode=IWDG_Activate
+VP_IWDG_VS_IWDG.Signal=IWDG_VS_IWDG
+VP_SYS_VS_ND.Mode=No_Debug
+VP_SYS_VS_ND.Signal=SYS_VS_ND
+VP_SYS_VS_tim1.Mode=TIM1
+VP_SYS_VS_tim1.Signal=SYS_VS_tim1
+VP_TIM2_VS_ClockSourceINT.Mode=Internal
+VP_TIM2_VS_ClockSourceINT.Signal=TIM2_VS_ClockSourceINT
+VP_TIM2_VS_no_output1.Mode=PWM Generation1 No Output
+VP_TIM2_VS_no_output1.Signal=TIM2_VS_no_output1
+VP_TIM2_VS_no_output3.Mode=PWM Generation3 No Output
+VP_TIM2_VS_no_output3.Signal=TIM2_VS_no_output3
+VP_TIM3_VS_ClockSourceINT.Mode=Internal
+VP_TIM3_VS_ClockSourceINT.Signal=TIM3_VS_ClockSourceINT
+VP_TIM3_VS_no_output4.Mode=Output Compare4 No Output
+VP_TIM3_VS_no_output4.Signal=TIM3_VS_no_output4
+board=TS100

Dockerfile

@@ -0,0 +1,31 @@
+FROM ubuntu:20.04
+LABEL maintainer="Ben V. Brown <ralim@ralimtek.com>"
+
+WORKDIR /build
+# Add extra mirrors for options
+RUN echo "deb mirror://mirrors.ubuntu.com/mirrors.txt focal main restricted universe multiverse" > /etc/apt/sources.list && \
+  echo "deb mirror://mirrors.ubuntu.com/mirrors.txt focal-updates main restricted universe multiverse" >> /etc/apt/sources.list && \
+  echo "deb mirror://mirrors.ubuntu.com/mirrors.txt focal-security main restricted universe multiverse" >> /etc/apt/sources.list && \
+  DEBIAN_FRONTEND=noninteractive apt-get update
+# Install dependencies to build the firmware
+RUN apt-get install -y \
+  make \
+  bzip2 \
+  git \
+  python3 \
+  python3-pip \
+  clang-format \
+  dfu-util \
+  wget --no-install-recommends && \
+  apt-get clean
+RUN python3 -m pip install bdflib
+# Download the two compilers
+RUN wget -qO- "https://developer.arm.com/-/media/Files/downloads/gnu-rm/10-2020q4/gcc-arm-none-eabi-10-2020-q4-major-x86_64-linux.tar.bz2" | tar -xj
+# This is the same as the one from Nuclei, just mirrored on Github as their download server is horrifically slow
+RUN wget -qO- "https://github.com/Ralim/nuclei-compiler/releases/download/2020.08/nuclei_riscv_newlibc_prebuilt_linux64_2020.08.tar.bz2" | tar -xj
+
+# Add compiler to the path
+ENV PATH "/build/gcc-arm-none-eabi-10-2020-q4-major/bin:$PATH"
+ENV PATH "/build/gcc/bin/:$PATH"
+COPY . /build/source
+COPY ./ci /build/ci

Documentation/DebugMenu.md

@@ -0,0 +1,79 @@
+# Debugging Menu
+
+In this firmware there is extra debugging information hidden under an extra menu.
+This is accessed by holding the rear (B) button on the iron while it is on the home screen.
+
+This menu is meant to be simple, so it has no fancy GUI animations.
+
+To move through the menu use the front (A) button.
+To exit, use the rear (B) button again.
+
+## Menu items
+
+Items are shown in the menu on a single line, so they use short codes
+
+### HW G
+
+This indicates the High Water mark for the stack for the GUI thread. The smaller this number is, the less headroom we have in the stack.
+As this is a Highwater mater, you should only trust this once you have walked through all GUI options to "hit" the worst one.
+
+### HW M
+
+This indicates the High Water mark for the stack for the movement detection thread. The smaller this number is, the less headroom we have in the stack.
+
+### HW P
+
+This indicates the High Water mark for the stack for the PID thread. The smaller this number is, the less headroom we have in the stack.
+
+### Time
+
+This just shows how many deciseconds the unit has been powered for.
+
+### Move
+
+This is the last timestamp of movement. When the iron is moved this should update to match the Time field (one before in the menu).
+This can be used for checking performance of the movement dection code.
+
+### RTip
+
+This is the raw tip reading in uV. This can be used when assessing the calibration routines for example.
+
+### CTip
+
+This is the tip temperature in deg C. 
+This can be used with RTip for assessing temperature processing performance.
+
+### CHan
+
+This is the handle temperature in C. This is used for cold junction compensation of the tip temp.
+This is shown in degrees C x10, so 200 == 20.0C
+
+### Vin 
+
+The input voltage as read by the internal ADC. Can be used to sanity check its being read correctly.
+
+### ACC 
+
+This indicates the accelerometer that is fitted inside the unit.
+
+- MMA8652
+- LIS2DH12
+- BMA223
+- MSA301
+- SC7A20
+- None detected -> running in fallback without movement detection
+- Scanning -> Still searching I2C for one
+
+### PWR 
+
+This indicates the current power source for the iron.
+This may change during power up as the sources are negotiated in turn.
+
+- 0 = DC input (dumb)
+- 1 = QC input (We used QC2/3 negotiation for current supply)
+- 2 = PD input (We used the PD subsystem to negotiate for the current supply)
+
+### Max 
+
+This indicates the max temp in C that the system estimates it can measure the tip reliably to.
+This is dependant on a few factors including the handle temperature so it can move around during use.

Documentation/Development.md

@@ -0,0 +1,30 @@
+# Development
+
+Building this software can be performed two ways, using the STMCubeIDE or using command line tools.
+
+## STM Cube IDE
+
+The easiest way to start working using the STM Cube IDE is to create a new project for the STM32F103RCTx.
+Then once this is created remove the auto-generated source code.
+Next drag the contents of the `source` folder into the project and choose to link to files.
+You will need to update the build settings for include paths & point to the new `.ld` linker file
+
+## Developing with command line tools & building a release
+
+In the `source` folder there is a makefile that can be used to build the repository using command line tools.
+when running the `make` command, specify which model of the device & the language you would like to use.
+
+`make -j8 lang=EN model=TS80`
+
+To build a release instead, run the build.sh script. This will update translations and also build every language for both TS100 and TS80 models.
+
+## Updating languages
+
+To update the language translation files & associated font map, execute the `make_translation.py` code from the translations directory.
+
+## Building Pinecil
+
+I highly recommend using the command line tools and using docker to run the compiler.
+It's a bit more fussy on setup than the STM tooling and this is by far the easiest way.
+If you _need_ an IDE I have used [Nuclei's IDE](https://nucleisys.com/download.php)
+And follow same idea as the STM Cube IDE notes above.

Documentation/Flashing.md

@@ -0,0 +1,150 @@
+# Flashing / Upgrading your iron
+
+## Downloading source file
+
+### Main release
+
+Main releases are made to the [releases page](https://github.com/Ralim/IronOS/releases).
+Download the zip file that matches your model of soldering iron, and extract it.
+You then need to use the appropriate file type for your unit, in general Miniware irons are `.hex` and Pinecil is `.bin`.
+Flash according to details below
+
+### Bleeding edge / latest
+
+For the _latest_ code, you will need to download the zip file from the artifacts page on the build for what you want.
+Head to the [Actions](https://github.com/Ralim/IronOS/actions) page and then select the run for the appropriate branch you would like.
+In general you probably want `master`.
+
+Once you click on a run, scroll down to the "Artifacts" section and then click on your model to download a zip file.
+Then this works the same as a production release (use the correct file).
+
+## Miniware irons (TS100, TS80, TS80P)
+
+This is completely safe, but if it goes wrong just put the .hex file from the [official website](http://www.miniware.com.cn/product-category/soldering-pen/electric-soldering-kit/) onto the unit and you're back to the old firmware. Downloads for the hex files to flash are available on the [releases page.](https://github.com/Ralim/IronOS/releases) The file you want is called _(MODEL)\_EN.hex_ unless you want the translations, they are (MODEL)\__language short name_.hex. Where (MODEL) is either TS100 or TS80.
+
+Officially the bootloader on the iron only works under Windows (use the built-in File Explorer, as alternative file managers or copy handlers like Teracopy will fail). However, users have reported that it does work under Mac, and can be made to work under Linux _sometimes_. Details over on the [wiki page](https://github.com/Ralim/ts100/wiki/Upgrading-Firmware).
+
+1. Hold the button closest to the tip, and plug in the USB to the computer.
+2. The unit will appear as a USB drive. ( Screen will say `DFU` on it.)
+3. Drag the .hex file onto the USB drive.
+4. The unit will disconnect and reconnect.
+5. The filename will have changed to end in .RDY or .ERR
+6. If it ends with .RDY you're done! Otherwise, something went wrong.
+7. If it didn't work the first time, try copying the file again without disconnecting the iron, often it will work on the second shot.
+8. Disconnect the USB and power up the iron. You're good to go.
+
+For the more adventurous out there, you can also load this firmware onto the device using an SWD programmer.
+
+On the bottom of the MCU riser PCB, there are 4 pads for programming. On v2.51A PCB revision `USB_D+` is shorted to `SWDIO` and `USB_D-` is shorted to `SWCLK` so debugging works without disassembly (attach while staying in the bootloader). Installing [dapboot from eDesignOSS](https://github.com/eDesignOSS/dapboot) (`make TARGET=TS100 -C src`) is recommended as it allows reliable flashing of binary files with [dfu-util](http://dfu-util.sourceforge.net/).
+
+There is a complete device flash backup included in this repository. (Note this includes the bootloader, so will need an SWD programmer to load onto the unit).
+
+For the TS80 the SWD pins are used for the QC negotiation, so you can actually connect to the SWD power via the USB connector.
+
+# Mac
+
+sgr1ff1n (Shane) commented in [issue 11](https://github.com/Ralim/ts100/issues/11) that upgrading worked on their Mac as per normal:
+
+> I just wanted to say that I was able to update the firmware on my ts100 from the stock version to 1.08 found in this repository using my Mac. I simply followed the same steps however through Finder. I have a MacBook Pro (13-inch, Mid 2012) running Sierra 10.12.4 (16E195).
+
+# Linux
+
+While in past there were reports of unreliable upgrades, the consensus in [issue 11](https://github.com/Ralim/ts100/issues/11) is that things work mostly as expected in Linux.
+
+@awigen has contributed a script [flash_ts100_linux.sh](https://raw.githubusercontent.com/Ralim/ts100/master/Flashing/flash_ts100_linux.sh) that works on Ubuntu 16.04 as well as other distros.
+
+If you want to do it manually (or if the script does not work for some reason) the general procedure is the same as for Windows, the differences are in the way to mount the unit and copy the firmware.
+Remember that after flashing, the firmware filename will have changed to end in `.RDY` or `.ERR` or `.NOT` and only `.RDY` means the flashing was successful!
+
+- The unit has to be mounted as `msdos` type (thanks @balrog-kun for having spotted it). You may disable automount, but unmounting the automounted drive and remounting as `msdos` works fine. You do not need to turn off automounting, but you do need to unmount the device with `umount`.
+- It is recommended to use an all-caps filename for the firmware, even if successful flashing were done with lower case names.
+- Avoid USB hubs, plug directly in your computer.
+- If it fails, try again several times without unplugging. Just let it remount.
+
+Example, to be run as root, once the unit has been plugged in DFU mode and auto-mounted:
+
+```bash
+FW=ts100.hex
+unset NAME
+eval $(lsblk -P -p -d --output NAME,MODEL|grep "DFU[ _]Disk")
+[ -z ${NAME+x} ] && exit 1  # Could not find DFU device
+umount "$NAME"
+mkdir /tmp/mntdfu
+mount -t msdos "$NAME" /tmp/mntdfu
+cp "$FW" "/tmp/mntdfu/$(basename $FW|tr a-z A-Z)"
+sync
+umount /tmp/mntdfu
+rmdir /tmp/mntdfu
+```
+
+Device will reboot and automount will rerun if not disabled.
+Check the extension of your firmware, it should be `.RDY` now.
+
+## Pinecil (Pine64)
+
+The MCU used in the Pinecil supports usb-dfu.
+
+To enter DFU mode, hold the button at the back of the iron while connecting to usb over usb-c.
+Generally all usb controllers work, but some hubs have issues so avoiding hubs may be best.
+
+Once the device is connected while holding the button, the screen will stay **off**.
+
+This is normal, and then you can use the appropriate tool to load the .hex or .bin file as per your OS.
+
+You can also refer to the Pine64 [Wiki](https://wiki.pine64.org/wiki/Pinecil).
+
+### Linux and Mac
+
+Using `dfu-util` you can flash the firmware using a command line as such:
+
+```
+dfu-util -D Pinecil_EN.dfu
+```
+
+### Windows
+
+For windows the easiest tool to use is the vendors gui tool from [here](http://www.gd32mcu.com/download/down/document_id/176/path_type/1).
+
+Should the link break, its called "GD32 MCU Dfu Tool" and can be grabbed from http://www.gd32mcu.com/en/download/.
+
+You will also need the matching drivers from [here](http://www.gd32mcu.com/download/down/document_id/244/path_type/1) installed if you have not used gigadevice parts before.
+
+These are called "GD32 Dfu Drivers" if the link breaks.
+
+You can also use dfu-util if you wish to set it up, but that is better documented by others
+
+### FAQ
+
+#### [Miniware] The file is showing up with the extension `.ERR`
+
+This can occur during the programming process if any of the checks in the bootloader fail. This is often triggered by anti-virus software or using a non-windows host OS.
+
+First, try just copying the file a second time.
+
+1. Attach the iron in DFU mode
+2. Copy the hex file to the device
+3. The device disconnects and connects with the `.ERR` file
+4. Copy the same hex file again **DO NOT TRY AND DELETE THE OLD ONE**
+5. The device will disconnect and reconnect again
+6. The device _should_ now have the `.RDY` file
+7. You're done.
+
+If this fails and you are on Mac or Linux reading the wiki page about programming can help. There is also a very long issue thread going through all of the different attempts around this too.
+
+If you are on windows, it's often best to try another computer (friends, work, partners etc).
+
+#### [Miniware] Device randomly disconnects or does not show up in DFU mode
+
+First, check the USB cable you are using has the data pins; test it on another device. There are a surprisingly large number of usb-micro cables that are power _only_.
+
+Secondly, try other USB ports. Often different USB controllers will interact with the units differently due to design quirks in the miniware design.
+
+## [Miniware] Alternative bootloader
+
+If you are an advanced user, and you have used `usb-dfu` tools before, or you would like to learn; there is an alternative bootloader for these irons.
+This will **NOT** show up as a USB storage drive, but instead show up using a standard DFU protocol device. You can then use dfu tools or GUI's to upgrade the iron using the `.bin` files that are posted to the releases page.
+
+To change to dapboot based alternative bootloader, you need to flash the hex file from [here](https://github.com/eDesignOSS/ts100-bl-flasher/releases).
+`ts100-stockbl.hex` will reflash the stock bootloader, `ts100-dapboot.hex` will flash the new dapboot based usb bootloader.
+
+Note that this is only recommended for users who know what they are doing. If you don't understand how this works, please don't flash this.

Documentation/GettingStarted.md

@@ -0,0 +1,84 @@
+# Getting Started
+
+Getting started with Iron OS on your Pinecil/TS80/TS80P/TS100.
+If your device did not come with Iron OS already installed, or if you need to update to the latest version; please see the [Flashing Guide](/Documentation/Flashing.md).
+
+Once your Iron has been flashed, on first power on it _may_ warn you about the system settings being reset.
+_Do not panic_; this is 100% completely normal. This is here to note to you that they have been reset to handle the internal structure changing.
+
+If you receive a warning about the accelerometer or USB-PD not being detected, please see [here](/Documentation/HardwareIssues.md).
+
+## The Home screen (or idle screen)
+
+This is the landing page of the firmware, from here you can choose to either go into the [settings menu](#Settings-Menu) or go into [soldering mode](#Soldering-Mode).
+
+By default this will show a screen similar to the one below:
+
+![Home Screen](/Documentation/images/HomeScreen.png)
+
+Note that this may be drawn mirrored depending on the orientation of your screen.
+
+The soldering iron symbol on the screen will appear near the tip. This is here to indicate that pressing the button closest to the front of the soldering iron will enter soldering mode.
+
+And naturally, the spanner like icon represents that pressing the button near the rear of the soldering iron will enter the settings menu.
+
+In the settings, you can turn on an advanced idle screen instead. The buttons still function the same, however, the image will be swapped for a text telling you the current status of the iron with extra details.
+
+Depending on how your device is being powered, at one end of the screen, the firmware will either draw text to show you the current-voltage your unit is being provided with, a battery icon (if battery mode is enabled) or a power plug icon.
+
+If you see exclamation marks (!!!) where the soldering iron should be, this indicates that the firmware can't see the tip connected. This could indicate a problem with the iron or tip if there is one inserted. First, try removing and reinstalling the tip. If the issue persists please see the [hardware issues section](/Documentation/HardwareIssues.md).
+
+This screen features a burn-in protection feature, where if no buttons or movement have been detected for a while it will automatically blank the screen to try and reduce burn-in if the iron is left unattended. Any movement or button press will wake the screen.
+
+### Hidden Extras
+
+Additionally to the two icons shown, there are two "hidden" actions that can be performed on this menu.
+
+If you press and hold on to the button near the tip of the soldering iron, this will bring up the temperature adjustment screen. Normally this is not required; but if you would like to adjust the set temperature _before_ the tip starts to heat, this can be useful.
+
+If you press and hold the button near the rear of the iron it will take you into the [debug menu](/Documentation/DebugMenu.md).
+
+## Soldering Mode
+
+When you press the button to enter into the soldering mode, the iron will instantly start to heat up the tip.
+
+The firmware defaults to 320C as the set point for the soldering mode, however on this screen you can enter into the adjustment screen by pressing either button.
+
+Pressing and holding the button near the tip will enter **boost** mode. This allows temporarily overriding the set temperature to a higher (or lower) value. This can be useful as a way to force the tip to a higher temperature to drive more wattage into a large joint when the thermal connection is not ideal.
+
+Pressing and holding the rear button will exit soldering mode and land you back at the home screen. You can also do this by pressing both buttons at once and this will also work, this is a bit harder to do but is kept for compatibility with the Miniware firmware.
+
+Pressing and holding **both** buttons at once will enter locked mode, which will prevent the buttons from doing anything. You can in the settings allow boost mode in locked mode optionally. This can be useful if you find yourself hitting the buttons and entering into the temperature adjustment screen by accident.
+
+### Idle sleep
+
+If the iron detects a period of time without any significant movement, it will enter into a sleep mode. This is indicated with a graphic on the screen similar to ZZzz (or text in detailed mode).
+
+In this mode, the temperature of the iron will automatically reduce down to a temperature just below the melting point of the solder. This helps reduce the rate of oxidation and damage to the iron tip.
+
+Simply picking up or moving the iron will wake it back up into soldering mode. You can also press any button and this will also wake the iron up.
+
+The Pinecil has a footprint (unpopulated) on the PCB for a hall effect sensor (Si7210). If you fit this then iron will additionally force sleep when it detects a strong magnetic field near the tip of the plastic body. This allows attaching a strong magnet near your iron holder to ensure it always enters sleep.
+
+### Idle shutdown
+
+If, after entering sleep mode the iron still does not see movement for a much longer time; it will shut down and return to the home screen.
+
+## Settings Menu
+
+The settings menu is the most often evolving aspect of the firmware, so each option is not documented here. However, do not panic, as every menu option has a description so that you don't _need_ to come back here to figure them all out.
+
+To navigate the menu, the two buttons act separately.
+The button that you pressed to enter the menu (rear) cycles down the options, and the other button (front) will change the current option.
+
+To see a description of an option, just pause and wait and after a little bit, it will scroll across the screen.
+
+The menu is comprised of a "main menu" of categories and then sub-items that allows you to adjust parameters.
+
+You can long hold buttons to change through options faster, and there is some acceleration when holding the buttons.
+
+There is a small scrollbar that will be shown along the edge of the screen to indicate how far through the current list you are.
+
+Additionally, this scrollbar will blink rapidly when you are on the last item in a menu choice.
+
+I highly recommend taking a few minutes to go through all of the options in the menu to get a feel for what you can change, almost every aspect of the internal system is adjustable to suit you.

Documentation/Hardware.md

@@ -0,0 +1,8 @@
+## Notes on the various supported hardware
+
+### MHP30
+
+- Accelerometer is the MSA301, this is mounted roughly in the middle of the unit
+- USB-PD is using the FUSB302
+- The hardware I2C bus on PB6/7 is used for the MSA301 and FUSB302
+- The OLED is the same SSD1306 as everything else, but its on a bit-banged bus

Documentation/HardwareIssues.md

@@ -0,0 +1,28 @@
+# Hardware Issues
+
+While we would love everything to work perfectly, sometimes that just doesn't happen.
+Please do not email maintainers directly, these will generally be ignored.
+Keep issue discussions to GitHub issues or the discussions page so that the whole community can help and work together.
+
+## No Accelerometer detected
+
+If your iron was previously working, this could be a bug (and we are very sorry). Please check the currently open and recently closed issues to check if anyone else has run into this. You can try going back to a release on the firmware to test if this is a new issue before opening an issue.
+
+If this is a new iron, also feel free to open an issue if you don't see any; a vendor _could_ have changed the model of the accelerometer on us without warning _again_. In which case, support should come shortly.
+
+If your iron is new, there is a slim chance your accelerometer may be DOA and need replacement.
+
+**Note this warning will only be shown the first few times until settings are reset**
+
+## No USB-PD IC detected
+
+Generally, this means either something went very awry in the firmware or the chip is not answering as would normally be expected. Try rolling back to an earlier release to confirm if the issue still persists then the device may need repair. If you have some form of seller protection/support you most likely want to reach out to this to be safe. If you don't, you can always attempt to replace the IC yourself. As of writing both the TS80P and Pinecil use the FUSB302.
+
+**Note this warning will only be shown the first few times until settings are reset**
+
+## No tip detected
+
+if your tip is not being detected, the most likely cause is that the heater element has been damaged from over-temperature, being dropped or bad luck. As the heater coil is part of the temperature measurement circuit neither will work if it's damaged.
+
+The best way to see if this is the case is to measure the resistance across the contacts to the tip using a multimeter.
+you are expecting to see measurements in the range of 4-10 ohms. Anything higher than 10 ohms is _generally_ an issue.

Documentation/History.md

@@ -0,0 +1,231 @@
+# Version Changes
+
+## V2.16
+
+* Overhaul of the Timer+ADC setup with help from @sandmanRO
+* Overhaul of the PID with help from @sandmanRO
+* Settings _should_ now upgrade in place to future versions, with resets only happening to new/changed settings
+* Shows error if tip runaway (failed temperature sensor) is detected
+* USB-PD now has a timeout, to allow forcing QC3 negotiation to start faster
+* QC3 Voltages are now adjustable to user desired setpoint
+* Added a small tolerance to allow "overvoltage" on QC3 above unit specifications.
+* * Please note: Doing this is entirely at your own risk!
+* New Advanced view that is much nicer to use and a very good daily driver option from @Mel-kior
+* OLED brightness and contrast thanks to @alvinhochun
+* Scrollbar is fixed so it doesnt jump around when menus are shown/hidden
+* Moved to `.dfu` files from `.bin` to make flashing commands easier
+* Every language had translation updates I believe
+* Romanian language added
+
+
+## V2.15
+
+
+## Feature upgrades:
+
+* MHP30 support
+* Multi-lingual firmware combinations now exist for Pinecil
+* More fine grained voltage controlled options
+* USB-PD improvements (version one and two)
+* More configuration options for power pulse
+* All font / character encoding has been very reworked
+* More translation updates than one can count 
+* More languages 😱 
+
+### MHP30
+
+The MHP30 is a small reflow station from Miniware.
+Thanks to a massive amount of help from @g3gg0 this firmware brings the beginnings of support for this unit.
+Also kudo's to @Vinigas  and @GoJian for helping with testing.
+This is not a _final_ version I'm sure, but this is a working, usable version of firmware support.
+Programs the same as any one Miniware unit using drag and drop.
+**Note: The boot logo scripts will need updates for this unit, so not supported yet.**
+
+The flood doors are now open for feature requests for this unit :)
+
+## V2.14
+
+- Fixing auto rotation bug in the LIS accelerometer in the TS80/TS80P
+- Adds support for two new accelerometers
+  -- SC7A20 (Future Pinecil batch) #786
+  -- MSA301 (Newer TS80P) #761
+- Add warnings if accelerometer or USB-PD IC's are not detected #752
+  -- Only shows for first few boots, to help catch unsupported models
+- Fixed cooling down blink to be sane speed #769
+- Cleanup of threads and slightly faster power negotiation #790
+
+- Updates to flashing scripts #775
+- Documentation updates all over the place (and the wiki was given a cleanup)|
+- Updates to makefile #792 #787
+- Cleanup the folder name of the source code #800
+- clang-format spec setup #801
+
+## V2.13
+
+- First _official_ Pinecil release
+- All of the wire for Pinecil releases added
+- Updated Translations
+- Delay accelerometer to help with entering sleep on startup
+- Dual speed PWM to help with power limit control
+- Improve heat up time
+- Adds locking mode
+- Improved docs all over the place
+- Repo rename occured TS100 -> IronOS
+- Hall effect sensor support added (not fitted in Pinecil but optional)
+- QC 20V support for Pinecil
+- CI upgrades for faster builds
+- Fixed bug with accelerometer model on Pinecil
+- Rework of all of the temperature curves for better accuracy
+
+## V2.12
+
+- Only released as pre-release
+- [TS80P] Improvements to the PD negotiation to handle a few more adapters cleanly
+- Pause on the last item in a list
+- Clean up the menu (removed both enables and settings, so that you can turn things off easier)
+- Removing the very old single line menu style.
+
+## V2.11
+
+- First TS80P support
+- Added in a USB-PD driver stack for the FUSB302
+- Fixed some graphical glitches
+
+## V2.10
+
+- GUI polish (animations and scroll bars)
+- Power pulse to keep power supplies alive
+- Adjustable tip response gain
+
+## V2.09
+
+- Adjustable steps in temperature adjustment
+- Git hash now in build string
+- Adjustable language to set if US units are available or not
+- Some minor QC3 improvements
+
+## V2.08
+
+- Fixes auto start in sleep mode
+- Power limiters
+
+## V2.07
+
+- QC fixes
+- Cosmetic fixes for leading 0's
+
+## V2.06
+
+- Warning on settings reset
+- Temp temp re-write
+- Display calibration offset
+- Hide some leading 0's
+- Menu timeouts
+
+## V2.05
+
+- Language updates
+
+## V2.04
+
+- GUI updates
+
+## V2.03
+
+- Support for new accelerometers
+
+## V2.02
+
+- Adds small font
+
+## V2.01
+
+- Newer settings menu
+
+## V2.00
+
+- Complete re-write of the low layer system to use the STM32 HAL for easier development
+- This allowed easier setup for the new ADC auto measuring system
+- Better tip PWM control
+- Moved to FreeRTOS for scheduling
+- Complete re-write from blank
+- Added detailed screen views
+- Added smaller font for said screen views
+
+## V1.17
+
+- Added blinking cooldown display
+- Allowed smaller sleep timeout values
+- New font!
+- Automatic startup option
+
+## V1.16
+
+- Added automatic rotation support
+- Added power display graph
+
+## V1.15
+
+- Added support for a custom bootup logo to be programmed via the DFU bootloader
+
+## V1.14
+
+- Changed input voltage cutoff to be based on cell count rather than voltage
+
+## V1.13
+
+- Swapped buttons for menu to prevent accidentally changing first menu item
+- Added auto key repeat
+
+## V1.12
+
+- Increases sensitivity options to be 1\*9 with 0 off state
+- Fixes issue where going from COOL \*> soldering can leave screen off
+
+## V1.11
+
+- Boost mode
+- Change sensitivity options to be 1\*8
+
+## V1.10
+
+- Adds help text to settings
+- Improves settings for the display update rate
+
+## V1.09
+
+- Adds display modes, for slowing down or simplifying the display
+
+## V1.08
+
+- Fix settings menu not showing flip display
+
+## V1.07
+
+- Adds shutdown time to automatically shutdown the iron after inactivity
+
+## V1.06
+
+- Changes H and C when the iron is heating to the minidso chevron like images
+
+## V1.05
+
+- Adds ability to calibrate the input voltage measurement
+
+## V1.04
+
+- Increased accuracy of the temperature control
+- Improved PID response slightly
+- Allows temperature offset calibration
+- Nicer idle screen
+
+## V1.03
+
+- Improved Button handling
+- Ability to set motion sensitivity
+- DC voltmeter page shows input voltage
+
+## V1.02
+
+- Adds hold both buttons on IDLE to access the therometer mode
+- Changes the exit soldering mode to be holding both buttons (Like original firmware)

Documentation/Logo.md

@@ -0,0 +1,40 @@
+# Startup Logos
+
+This firmware supports a user created bootup logo.
+By default there is _not_ one included in the firmware, as this means that once flashed they generally stay.
+
+## Generating the Logo files
+
+The [Python script](https://github.com/Ralim/ts100/blob/master/Bootup%20Logo/python_logo_converter/img2ts100.py) converts an image passed into it on the command line to a HEX file to be uploaded to the iron in DFU mode (similar to the process described above). The image can be in color and any size, but it will be resized and converted to 1-bit color. However, it looks best if you create a 96x16 image in an image editor and color the pixels black or white manually.
+
+The converter requires at least Python 3 and Pillow (if you don't have it, it will tell you to install PIL, which is an old version of the same thing). See [this page](https://stackoverflow.com/a/20061019/6705343) on StackOverflow about installing it.
+
+What works can vary, but this command may work:
+
+`python3 -m pip install Pillow`
+
+Then, to convert an image:
+
+`python3 img2ts100.py infile.png outfile.hex`
+
+Run `python3 img2ts100.py --help` to see available options.
+
+## Flashing the Logo
+
+### Miniware (TS100/TS80/TS80P)
+
+Upload the HEX file to the iron in DFU mode and, if the file's extension changes to .RDY, your custom splash screen should show up on startup.
+You perform this the same way as if you were flashing a new firmware, and all of the existing notes around this apply.
+
+### Pinecil
+
+For the Pinecil, we require to flash the logo using dfu-util instead, which will only take `.bin` files rather than `.hex`.
+To flash the logo, use the following steps:
+
+
+ - `python3 img2ts100.py input.png logo.hex`
+ - `riscv-nuclei-elf-objcopy -I ihex -O binary logo.hex logo.bin`
+ - `dfu-util -d 28e9:0189 -a 0 -D logo.bin -s 0x0801F800`
+
+ This will use the objcopy tool to convert the hex to a binary file, and then use dfu-util to flash it in the right location.
+ If you do not have `riscv-nuclei-elf-objcopy` installed, you can generally use any objcopy tool from any toolchain you do have.

Documentation/Menu.md

@@ -0,0 +1,59 @@
+# Menu System
+
+In this firmware for these soldering irons, all settings are adjustable on the device itself. This means you do **not** require a computer to change any settings.
+
+## Soldering mode
+
+In this mode the iron works as you would expect, pressing either button will take you to a temperature change screen.
+Use each button to go up and down in temperature. Pressing both buttons will exit you from the temperature menu (or wait 3 seconds and it will time out).
+Pressing both buttons or holding the button near the USB will exit the soldering mode.
+Holding the button at the front of the iron will enter boost mode (if enabled).
+
+## Settings Menu
+
+This menu allows you to cycle through all the options and set their values.
+The button near the USB cycles through the options, and the one near the tip changes the selected option.
+Note that settings are not saved until you exit the menu.
+If you leave the unit alone (ie don't press any buttons) on a setting, after 3 seconds the screen will scroll a rough description of the setting.
+
+The menu is arranged so that the most often used settings are first.
+With submenus being selected to enter using the front button (as if you were going to change the setting).
+Scrolling through the submenu will return you back to its entry location after you scroll through all of the options.
+
+### Calibrating input voltage
+
+Due to the tolerance on the resistors used for the input voltage divider, some irons can be up to 0.6V out on the voltage measurement.
+Please calibrate your iron if you have any issues with the cutoff voltage.
+Note that cutoff messages can also be triggered by using a power supply that is too weak and fails under the load of the iron.
+
+To calibrate your iron:
+
+1. Measure the input voltage with a multimeter and note it down.
+2. Connect the input to your iron.
+3. Enter the settings menu
+4. Under the advanced submenu
+5. Select the calibrate voltage option
+6. Use the front and back buttons to adjust the displayed voltage to minimize the error to your original measurement
+7. Press both buttons at the same time to save and exit to the menu
+
+### Calibrating tip offset (Set tip model)
+
+Some tips will have an offset on their readings, to calibrate this out perform the following steps:
+
+1. Connect power to your iron
+2. Make sure the tip is at room temperature (ie. wait for a fair while after using the iron before calibration)
+3. Enter the settings menu
+4. Scroll down to the advanced menu, and then the temperature calibration
+5. Press the button to change the option (tip button)
+6. The display will start to scroll a warning message to check that the tip is at ambient temperature!
+7. Press the button near the tip of the iron to confirm
+8. The display will go to "...." for a short period of time as the unit measures the tip temperature and the handle temperature and compares them
+9. The display will then go back to *TMP CAL* and it will display a number, this is your offset number. You generally don't need it unless debugging issues
+10. Calibration is done, just exit the settings menu as normal
+11. You're done, enjoy your iron!
+
+### Boost mode
+
+This allows you to change the front key (one near the tip) to become a boost button when you hold it for > 2 seconds. This allows you to set this button to change the soldering temperature for short periods. For example when soldering a big joint and you want to boost the temperature a bit.
+
+The boost temperature is set in the settings menu.

Documentation/Power.md

@@ -0,0 +1,24 @@
+# Power & Performance
+
+All of the irons are PWM controlled resistive heating elements.
+This means that the electronics in the handle can only turn the heating element on and off.
+This *means* that the power provided in the tip is 100% controlled by the supply voltage used.
+
+Both irons at their simplest are just a resistor connected to your power source via a switch.
+
+When the switch is on, the power in the resistor is `Current (I) times Volts (V)`.
+Current through the resistor is `Volts (V) divided by Resistance (R)`.
+Combining these two gives the common equation, power is `Volts (V) squared / Resistance (R)`.
+
+The resistance of the tip is fixed, ~7.5 ohms for the TS100/Pinecil and ~4.5 ohms for the TS80(P).
+
+This means that for both irons, the power delivered to the soldering tip is proportional to the voltage used, squared.
+This is why the TS100 performs poorly when run off 12V power supplies.
+
+## Output Control & Regulation
+
+Both soldering irons use a FET to switch the power to the soldering iron tip. This is a P-MOSFET and its controlled via a small transistor circuit, which in turn is controlled via the STM32. The STM32 controls this PWM output proportional to the output from the PID control loop running in the software.
+
+To measure the tip temperature in the iron, the iron has a small op-amp connected across the terminals, this is setup to measure the voltage across the same terminals that are used the power the tip. In order to be able to read the small voltage generated by the thermocouple junction, the irons output must be turned off.
+Once the output is turned off (via the FET), the system has a recovery time as the tip capacitance discharges and the op-amp exits saturation. After this delay period, the STM32 ADC samples the output of the op-amp 8 times quickly and then sets a flag to turn the PWM output back on.
+This enforces a small dead time in the output signal while this occurs, so there is a balance between sampling the temperature often to maintain stable tip temperature control and sampling less often to increase the maximum power deliverable to the tip

Documentation/Temperature.md

@@ -0,0 +1,58 @@
+# Tip temperature measurement
+
+The soldering irons use a modified N-type thermocouple in the tip to measure the tip temperature.
+This is constructed for free by using a different type of metal to join one of the rings to the heating coil. This effectively creates a free temperature sensor for very low cost and construction difficulty.
+
+The downsides of this are twofold; one, it is made using non-optimal metals and has a non-constant temperature response; and two, as this uses the same connections as the heating current, you can't measure the temperature while you are heating the tip.
+
+
+
+##  How a thermocouple works (brief)
+
+A thermocouple uses a junction of two dissimilar metals to create a very small amount of power (microvolts). This can then be measured and used with a known transfer function to derive the temperature of the junction.
+This has some fairly large limitations, but it also has the benefit of being extremely cheap.
+
+Conventionally a thermocouple is created using two dissimilar metals that join, and then the other ends of these metals are terminated to copper contacts. These copper contacts are also part of the construction of the thermocouple and are referred to as the cold junction.
+As there are these extra two joins between the thermocouple wires and the copper; these also have properties of their own in their reactions with temperature.
+
+If the cold junction is held at 0 degree's C, then their effect is considered to be null, and so they can be ignored. However, in the real world the joins to copper are often at room temperature, and as such the measured voltage from the thermocouple must be compensated to remove the influence of these joints. This process is often called cold junction compensation.
+
+Every time in the circuit there is a join between two different metals, there is a small thermocouple created, this means that _every_ soldered connection is also one. 
+
+
+## How these irons implement the temperature reading
+
+If you analyse one of the open circuit schematics (Pinecil, TS100, TS80) they all use the same approximate formula.
+This consists of an op-amp that is connected directly across the heating connections to the tip, and a separate handle temperature sensor.
+
+When the iron is **not** heating the tip, the microcontroller uses the ADC to read the output from the op-amp. This produces a voltage that _should_ be linear to the temperature of (tip-handle). This value is then offset compensated (to remove ADC+op-amp offsets), and then converted into a temperature delta in C/K. This temperature delta can then be added to the handle temperature to derive the tip temperature in C.
+
+Depending on the construction of the tip, the lookup values used for converting the tip reading in uV into degrees C/K varies. It is worth noting, however, that TS100 and Pinecil tips are approximately the same as the Hakko T12 tips. (In @Ralim's testing, to within measurement error). This makes sense as these tips are cheap and would have made an excellent design for Miniware to have cloned in making the TS100 in the first place.
+
+## Implications of this
+
+### Reading accuracy vs Heating performance tradeoff
+
+Because the tip can only be measured when the unit is not heating, the more often the tip is measured (for finer temperature control) the less time the unit can spend heating up the tip. This means that for fast heat up and fine temperature control the firmware now implements two speeds to the controller loop. During heating up the system runs fewer temperature measurements and instead allows the tip to spend more time burning power. Once the unit is up to temperature the rate of taking temperature readings is doubled to allow for faster reaction times.
+
+### Tip heat up lag time
+
+As the temperature sensor is a part of the heater coil inside of the tip (or very close by, not entirely certain); the temperature reading is of the _inside_ of the tip, rather than the outside. The outside temperature is the most critical for the user as this is where the solder is actually melting and performing work.
+
+The PID controller in the firmware is tuned to be slightly underdamped and thus more "jumpy" than some people would expect. This is based on the theory that if the inside of the tip is seeing the temperature droop; the outside temperature has dropped more and so we should overcompensate until they equalise.
+
+This is why sometimes the temperature may flick around a little during use but the tip temperature itself is quite stable. The thermal mass of the tip smooths these small amounts out nicely for the user. Though seeing larger jumps on some tips than others _may_ indicate that the tip does not have optimal internal thermal bonding between the heater coil and the tip itself.
+
+The firmware uses the theory that these irons are more towards the power users territory than most, so it tries to not hide the actual temperature. What some soldering iron controllers do is that they hide the actual measurement once you are within a certain tolerance of this. For example, on a digital Weller unit Ralim has to hand, if set to 350C, it will regulate to within around +-3 C but not indicate you are outside of this bad until you exceed +-5C. This gives the illusion that it's holding the temperature perfectly when in actuality it's moving around as well.
+
+Given enough time (3-5 seconds) with no external cooling, the inside and outside temperatures of the tip will be equal. When testing the tip temperature accuracy try to allow time for the system to stabilise.
+
+### Complexity of measurement
+
+The firmware in these irons does a best-effort of calculating an accurate temperature, but as always there is a tradeoff between perfect accuracy and firmware complexity and setup. As these irons are built down to a cost, expecting accuracy greater than 1% is not really an option as the voltage reference is only 1% accurate at best. So _all_ measurements are affected by its accuracy. And the low-cost chips used in the irons do not come calibrated from the factory so we do not have an internal calibration we can use to try and measure this inaccuracy.
+
+The firmware only accounts for cold junction compensation and then treats the remaining error as being a constant offset. 
+While the error is small, it is actually composed of both a constant offset as well as an offset that is linear to the handle temperature.
+This offset that is linear to handle temperature is as of current not modelled into the firmware and there is assumed to be constant. This is generally "close enough" as once the unit is in use, the handle temperature is usually within 10C as the components inside warm-up from use. This means that this error is "relatively" constant once the unit is being used. However, this can cause odd behaviour when the tip temperature ~= room temperature. And can cause some jumping and movement in the readings when attempting to control the tip to sub 100C.
+
+This is a known tradeoff that is made as the irons intended use case means that it will spend most of its time above 150C, at which point these errors are no longer the dominant error sources in the system.

Documentation/Translation.md

@@ -0,0 +1,6 @@
+# Translation
+If you would like to contribute a translation, use the [Translation Editor](http://htmlpreview.github.io/?https://github.com/Ralim/ts100/blob/master/Translations/TranslationEditor.html).
+
+[Open a reference language file and optionally a target language file](https://github.com/Ralim/ts100/tree/master/Translations).
+
+You can create a pull request with the new / updated json configuration file, and this will include this language into the new builds for the firmware.

Flashing/flash_ts100_linux.sh

@@ -13,13 +13,13 @@ function usage() {
     echo
     echo "This script has been tested to work on Fedora."
     echo "If you experience any issues please open a ticket at:"
-    echo "https://github.com/Ralim/ts100/issues/new"
+    echo "https://github.com/Ralim/IronOS/issues/new"
     echo
 }
 
 GAUTOMOUNT=0
 function disable_gautomount {
-    GSETTINGS=`which gsettings`
+    GSETTINGS=$(which gsettings)
     if [ $? -ne 0 ]; then
         return 1
     fi
@@ -37,11 +37,11 @@ function enable_gautomount {
 }
 
 function is_attached {
-    output=`lsblk -b --raw --output NAME,MODEL | grep 'DFU\\\\x20Disk'`
+    output=$(lsblk -b --raw --output NAME,MODEL | grep 'DFU.*Disk')
     if [ $? -ne 0 ]; then
       return 1
     fi
-    DEVICE=`echo $output | awk '{print "/dev/"$1}'`
+    DEVICE=$(echo $output | awk '{print "/dev/"$1}')
 }
 
 instructions="not printed"
@@ -102,7 +102,7 @@ if [ ! -f "$1" ]; then
     exit 1
 fi
 
-if [ `head -c1 "$1"` != ":" ] || [ `tail -n1 "$1" | head -c1` != ":" ]; then
+if [ $(head -c1 "$1") != ":" ] || [ $(tail -n1 "$1" | head -c1) != ":" ]; then
     echo "'$1' doesn't look like a valid HEX file. Please provide a HEX file to flash"
     usage
     exit 1

History.md

@@ -1,89 +0,0 @@
-# Version Changes
-V2.00
-
-* Complete re-write of the low layer system to use the STM32 HAL for easier development
-* This allowed easier setup for the new ADC auto measuring system
-* Better tip PWM control
-* Moved to FreeRTOS for scheduling
-* Complete re-write from blank
-* Added detailed screen views
-* Added smaller font for said screen views
-
-
-V1.17
-
-* Added blinking cooldown display
-* Allowed smaller sleep timeout values
-* New font!
-* Automatic startup option
-
-V1.16
-
-* Added automatic rotation support
-* Added power display graph
-
-V1.15
-
-* Added support for a custom bootup logo to be programmed via the DFU bootloader.
-
-V1.14
-
-* Changed input voltage cutoff to be based on cell count rather than voltage.
-
-V1.13
-
-* Swapped buttons for menu to prevent accidentally changing first menu item
-* Added auto key repeat.
-
-V1.12
-
-* Increases sensitivity options to be 1*9 with 0 off state
-* Fixes issue where going from COOL *> soldering can leave screen off.
-
-V1.11
-
-* Boost mode
-* Change sensitivity options to be 1*8
-
-V1.10
-
-* Adds help text to settings
-* Improves settings for the display update rate
-
-V1.09
-
-* Adds display modes, for slowing down or simplifying the display
-
-V1.08
-
-* Fix settings menu not showing flip display
-
-V1.07
-
-* Adds shutdown time to automatically shutdown the iron after inactivity
-
-V1.06
-
-* Changes H and C when the iron is heating to the minidso chevron like images
-
-V1.05
-
-* Adds ability to calibrate the input voltage measurement
-
-V1.04
-
-* Increased accuracy of the temperature control
-* Improved PID response slightly
-* Allows temperature offset calibration
-* Nicer idle screen
-
-V1.03 
-
-* Improved Button handling
-* Ability to set motion sensitivity
-* DC voltmeter page shows input voltage
-
-V1.02
-
-* Adds hold both buttons on IDLE to access the therometer mode.
-* Changes the exit soldering mode to be holding both buttons (Like original firmware).

LICENSE

@@ -0,0 +1,674 @@
+                    GNU GENERAL PUBLIC LICENSE
+                       Version 3, 29 June 2007
+
+ Copyright (C) 2007 Free Software Foundation, Inc. <http://fsf.org/>
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+                            Preamble
+
+  The GNU General Public License is a free, copyleft license for
+software and other kinds of works.
+
+  The licenses for most software and other practical works are designed
+to take away your freedom to share and change the works.  By contrast,
+the GNU General Public License is intended to guarantee your freedom to
+share and change all versions of a program--to make sure it remains free
+software for all its users.  We, the Free Software Foundation, use the
+GNU General Public License for most of our software; it applies also to
+any other work released this way by its authors.  You can apply it to
+your programs, too.
+
+  When we speak of free software, we are referring to freedom, not
+price.  Our General Public Licenses are designed to make sure that you
+have the freedom to distribute copies of free software (and charge for
+them if you wish), that you receive source code or can get it if you
+want it, that you can change the software or use pieces of it in new
+free programs, and that you know you can do these things.
+
+  To protect your rights, we need to prevent others from denying you
+these rights or asking you to surrender the rights.  Therefore, you have
+certain responsibilities if you distribute copies of the software, or if
+you modify it: responsibilities to respect the freedom of others.
+
+  For example, if you distribute copies of such a program, whether
+gratis or for a fee, you must pass on to the recipients the same
+freedoms that you received.  You must make sure that they, too, receive
+or can get the source code.  And you must show them these terms so they
+know their rights.
+
+  Developers that use the GNU GPL protect your rights with two steps:
+(1) assert copyright on the software, and (2) offer you this License
+giving you legal permission to copy, distribute and/or modify it.
+
+  For the developers' and authors' protection, the GPL clearly explains
+that there is no warranty for this free software.  For both users' and
+authors' sake, the GPL requires that modified versions be marked as
+changed, so that their problems will not be attributed erroneously to
+authors of previous versions.
+
+  Some devices are designed to deny users access to install or run
+modified versions of the software inside them, although the manufacturer
+can do so.  This is fundamentally incompatible with the aim of
+protecting users' freedom to change the software.  The systematic
+pattern of such abuse occurs in the area of products for individuals to
+use, which is precisely where it is most unacceptable.  Therefore, we
+have designed this version of the GPL to prohibit the practice for those
+products.  If such problems arise substantially in other domains, we
+stand ready to extend this provision to those domains in future versions
+of the GPL, as needed to protect the freedom of users.
+
+  Finally, every program is threatened constantly by software patents.
+States should not allow patents to restrict development and use of
+software on general-purpose computers, but in those that do, we wish to
+avoid the special danger that patents applied to a free program could
+make it effectively proprietary.  To prevent this, the GPL assures that
+patents cannot be used to render the program non-free.
+
+  The precise terms and conditions for copying, distribution and
+modification follow.
+
+                       TERMS AND CONDITIONS
+
+  0. Definitions.
+
+  "This License" refers to version 3 of the GNU General Public License.
+
+  "Copyright" also means copyright-like laws that apply to other kinds of
+works, such as semiconductor masks.
+
+  "The Program" refers to any copyrightable work licensed under this
+License.  Each licensee is addressed as "you".  "Licensees" and
+"recipients" may be individuals or organizations.
+
+  To "modify" a work means to copy from or adapt all or part of the work
+in a fashion requiring copyright permission, other than the making of an
+exact copy.  The resulting work is called a "modified version" of the
+earlier work or a work "based on" the earlier work.
+
+  A "covered work" means either the unmodified Program or a work based
+on the Program.
+
+  To "propagate" a work means to do anything with it that, without
+permission, would make you directly or secondarily liable for
+infringement under applicable copyright law, except executing it on a
+computer or modifying a private copy.  Propagation includes copying,
+distribution (with or without modification), making available to the
+public, and in some countries other activities as well.
+
+  To "convey" a work means any kind of propagation that enables other
+parties to make or receive copies.  Mere interaction with a user through
+a computer network, with no transfer of a copy, is not conveying.
+
+  An interactive user interface displays "Appropriate Legal Notices"
+to the extent that it includes a convenient and prominently visible
+feature that (1) displays an appropriate copyright notice, and (2)
+tells the user that there is no warranty for the work (except to the
+extent that warranties are provided), that licensees may convey the
+work under this License, and how to view a copy of this License.  If
+the interface presents a list of user commands or options, such as a
+menu, a prominent item in the list meets this criterion.
+
+  1. Source Code.
+
+  The "source code" for a work means the preferred form of the work
+for making modifications to it.  "Object code" means any non-source
+form of a work.
+
+  A "Standard Interface" means an interface that either is an official
+standard defined by a recognized standards body, or, in the case of
+interfaces specified for a particular programming language, one that
+is widely used among developers working in that language.
+
+  The "System Libraries" of an executable work include anything, other
+than the work as a whole, that (a) is included in the normal form of
+packaging a Major Component, but which is not part of that Major
+Component, and (b) serves only to enable use of the work with that
+Major Component, or to implement a Standard Interface for which an
+implementation is available to the public in source code form.  A
+"Major Component", in this context, means a major essential component
+(kernel, window system, and so on) of the specific operating system
+(if any) on which the executable work runs, or a compiler used to
+produce the work, or an object code interpreter used to run it.
+
+  The "Corresponding Source" for a work in object code form means all
+the source code needed to generate, install, and (for an executable
+work) run the object code and to modify the work, including scripts to
+control those activities.  However, it does not include the work's
+System Libraries, or general-purpose tools or generally available free
+programs which are used unmodified in performing those activities but
+which are not part of the work.  For example, Corresponding Source
+includes interface definition files associated with source files for
+the work, and the source code for shared libraries and dynamically
+linked subprograms that the work is specifically designed to require,
+such as by intimate data communication or control flow between those
+subprograms and other parts of the work.
+
+  The Corresponding Source need not include anything that users
+can regenerate automatically from other parts of the Corresponding
+Source.
+
+  The Corresponding Source for a work in source code form is that
+same work.
+
+  2. Basic Permissions.
+
+  All rights granted under this License are granted for the term of
+copyright on the Program, and are irrevocable provided the stated
+conditions are met.  This License explicitly affirms your unlimited
+permission to run the unmodified Program.  The output from running a
+covered work is covered by this License only if the output, given its
+content, constitutes a covered work.  This License acknowledges your
+rights of fair use or other equivalent, as provided by copyright law.
+
+  You may make, run and propagate covered works that you do not
+convey, without conditions so long as your license otherwise remains
+in force.  You may convey covered works to others for the sole purpose
+of having them make modifications exclusively for you, or provide you
+with facilities for running those works, provided that you comply with
+the terms of this License in conveying all material for which you do
+not control copyright.  Those thus making or running the covered works
+for you must do so exclusively on your behalf, under your direction
+and control, on terms that prohibit them from making any copies of
+your copyrighted material outside their relationship with you.
+
+  Conveying under any other circumstances is permitted solely under
+the conditions stated below.  Sublicensing is not allowed; section 10
+makes it unnecessary.
+
+  3. Protecting Users' Legal Rights From Anti-Circumvention Law.
+
+  No covered work shall be deemed part of an effective technological
+measure under any applicable law fulfilling obligations under article
+11 of the WIPO copyright treaty adopted on 20 December 1996, or
+similar laws prohibiting or restricting circumvention of such
+measures.
+
+  When you convey a covered work, you waive any legal power to forbid
+circumvention of technological measures to the extent such circumvention
+is effected by exercising rights under this License with respect to
+the covered work, and you disclaim any intention to limit operation or
+modification of the work as a means of enforcing, against the work's
+users, your or third parties' legal rights to forbid circumvention of
+technological measures.
+
+  4. Conveying Verbatim Copies.
+
+  You may convey verbatim copies of the Program's source code as you
+receive it, in any medium, provided that you conspicuously and
+appropriately publish on each copy an appropriate copyright notice;
+keep intact all notices stating that this License and any
+non-permissive terms added in accord with section 7 apply to the code;
+keep intact all notices of the absence of any warranty; and give all
+recipients a copy of this License along with the Program.
+
+  You may charge any price or no price for each copy that you convey,
+and you may offer support or warranty protection for a fee.
+
+  5. Conveying Modified Source Versions.
+
+  You may convey a work based on the Program, or the modifications to
+produce it from the Program, in the form of source code under the
+terms of section 4, provided that you also meet all of these conditions:
+
+    a) The work must carry prominent notices stating that you modified
+    it, and giving a relevant date.
+
+    b) The work must carry prominent notices stating that it is
+    released under this License and any conditions added under section
+    7.  This requirement modifies the requirement in section 4 to
+    "keep intact all notices".
+
+    c) You must license the entire work, as a whole, under this
+    License to anyone who comes into possession of a copy.  This
+    License will therefore apply, along with any applicable section 7
+    additional terms, to the whole of the work, and all its parts,
+    regardless of how they are packaged.  This License gives no
+    permission to license the work in any other way, but it does not
+    invalidate such permission if you have separately received it.
+
+    d) If the work has interactive user interfaces, each must display
+    Appropriate Legal Notices; however, if the Program has interactive
+    interfaces that do not display Appropriate Legal Notices, your
+    work need not make them do so.
+
+  A compilation of a covered work with other separate and independent
+works, which are not by their nature extensions of the covered work,
+and which are not combined with it such as to form a larger program,
+in or on a volume of a storage or distribution medium, is called an
+"aggregate" if the compilation and its resulting copyright are not
+used to limit the access or legal rights of the compilation's users
+beyond what the individual works permit.  Inclusion of a covered work
+in an aggregate does not cause this License to apply to the other
+parts of the aggregate.
+
+  6. Conveying Non-Source Forms.
+
+  You may convey a covered work in object code form under the terms
+of sections 4 and 5, provided that you also convey the
+machine-readable Corresponding Source under the terms of this License,
+in one of these ways:
+
+    a) Convey the object code in, or embodied in, a physical product
+    (including a physical distribution medium), accompanied by the
+    Corresponding Source fixed on a durable physical medium
+    customarily used for software interchange.
+
+    b) Convey the object code in, or embodied in, a physical product
+    (including a physical distribution medium), accompanied by a
+    written offer, valid for at least three years and valid for as
+    long as you offer spare parts or customer support for that product
+    model, to give anyone who possesses the object code either (1) a
+    copy of the Corresponding Source for all the software in the
+    product that is covered by this License, on a durable physical
+    medium customarily used for software interchange, for a price no
+    more than your reasonable cost of physically performing this
+    conveying of source, or (2) access to copy the
+    Corresponding Source from a network server at no charge.
+
+    c) Convey individual copies of the object code with a copy of the
+    written offer to provide the Corresponding Source.  This
+    alternative is allowed only occasionally and noncommercially, and
+    only if you received the object code with such an offer, in accord
+    with subsection 6b.
+
+    d) Convey the object code by offering access from a designated
+    place (gratis or for a charge), and offer equivalent access to the
+    Corresponding Source in the same way through the same place at no
+    further charge.  You need not require recipients to copy the
+    Corresponding Source along with the object code.  If the place to
+    copy the object code is a network server, the Corresponding Source
+    may be on a different server (operated by you or a third party)
+    that supports equivalent copying facilities, provided you maintain
+    clear directions next to the object code saying where to find the
+    Corresponding Source.  Regardless of what server hosts the
+    Corresponding Source, you remain obligated to ensure that it is
+    available for as long as needed to satisfy these requirements.
+
+    e) Convey the object code using peer-to-peer transmission, provided
+    you inform other peers where the object code and Corresponding
+    Source of the work are being offered to the general public at no
+    charge under subsection 6d.
+
+  A separable portion of the object code, whose source code is excluded
+from the Corresponding Source as a System Library, need not be
+included in conveying the object code work.
+
+  A "User Product" is either (1) a "consumer product", which means any
+tangible personal property which is normally used for personal, family,
+or household purposes, or (2) anything designed or sold for incorporation
+into a dwelling.  In determining whether a product is a consumer product,
+doubtful cases shall be resolved in favor of coverage.  For a particular
+product received by a particular user, "normally used" refers to a
+typical or common use of that class of product, regardless of the status
+of the particular user or of the way in which the particular user
+actually uses, or expects or is expected to use, the product.  A product
+is a consumer product regardless of whether the product has substantial
+commercial, industrial or non-consumer uses, unless such uses represent
+the only significant mode of use of the product.
+
+  "Installation Information" for a User Product means any methods,
+procedures, authorization keys, or other information required to install
+and execute modified versions of a covered work in that User Product from
+a modified version of its Corresponding Source.  The information must
+suffice to ensure that the continued functioning of the modified object
+code is in no case prevented or interfered with solely because
+modification has been made.
+
+  If you convey an object code work under this section in, or with, or
+specifically for use in, a User Product, and the conveying occurs as
+part of a transaction in which the right of possession and use of the
+User Product is transferred to the recipient in perpetuity or for a
+fixed term (regardless of how the transaction is characterized), the
+Corresponding Source conveyed under this section must be accompanied
+by the Installation Information.  But this requirement does not apply
+if neither you nor any third party retains the ability to install
+modified object code on the User Product (for example, the work has
+been installed in ROM).
+
+  The requirement to provide Installation Information does not include a
+requirement to continue to provide support service, warranty, or updates
+for a work that has been modified or installed by the recipient, or for
+the User Product in which it has been modified or installed.  Access to a
+network may be denied when the modification itself materially and
+adversely affects the operation of the network or violates the rules and
+protocols for communication across the network.
+
+  Corresponding Source conveyed, and Installation Information provided,
+in accord with this section must be in a format that is publicly
+documented (and with an implementation available to the public in
+source code form), and must require no special password or key for
+unpacking, reading or copying.
+
+  7. Additional Terms.
+
+  "Additional permissions" are terms that supplement the terms of this
+License by making exceptions from one or more of its conditions.
+Additional permissions that are applicable to the entire Program shall
+be treated as though they were included in this License, to the extent
+that they are valid under applicable law.  If additional permissions
+apply only to part of the Program, that part may be used separately
+under those permissions, but the entire Program remains governed by
+this License without regard to the additional permissions.
+
+  When you convey a copy of a covered work, you may at your option
+remove any additional permissions from that copy, or from any part of
+it.  (Additional permissions may be written to require their own
+removal in certain cases when you modify the work.)  You may place
+additional permissions on material, added by you to a covered work,
+for which you have or can give appropriate copyright permission.
+
+  Notwithstanding any other provision of this License, for material you
+add to a covered work, you may (if authorized by the copyright holders of
+that material) supplement the terms of this License with terms:
+
+    a) Disclaiming warranty or limiting liability differently from the
+    terms of sections 15 and 16 of this License; or
+
+    b) Requiring preservation of specified reasonable legal notices or
+    author attributions in that material or in the Appropriate Legal
+    Notices displayed by works containing it; or
+
+    c) Prohibiting misrepresentation of the origin of that material, or
+    requiring that modified versions of such material be marked in
+    reasonable ways as different from the original version; or
+
+    d) Limiting the use for publicity purposes of names of licensors or
+    authors of the material; or
+
+    e) Declining to grant rights under trademark law for use of some
+    trade names, trademarks, or service marks; or
+
+    f) Requiring indemnification of licensors and authors of that
+    material by anyone who conveys the material (or modified versions of
+    it) with contractual assumptions of liability to the recipient, for
+    any liability that these contractual assumptions directly impose on
+    those licensors and authors.
+
+  All other non-permissive additional terms are considered "further
+restrictions" within the meaning of section 10.  If the Program as you
+received it, or any part of it, contains a notice stating that it is
+governed by this License along with a term that is a further
+restriction, you may remove that term.  If a license document contains
+a further restriction but permits relicensing or conveying under this
+License, you may add to a covered work material governed by the terms
+of that license document, provided that the further restriction does
+not survive such relicensing or conveying.
+
+  If you add terms to a covered work in accord with this section, you
+must place, in the relevant source files, a statement of the
+additional terms that apply to those files, or a notice indicating
+where to find the applicable terms.
+
+  Additional terms, permissive or non-permissive, may be stated in the
+form of a separately written license, or stated as exceptions;
+the above requirements apply either way.
+
+  8. Termination.
+
+  You may not propagate or modify a covered work except as expressly
+provided under this License.  Any attempt otherwise to propagate or
+modify it is void, and will automatically terminate your rights under
+this License (including any patent licenses granted under the third
+paragraph of section 11).
+
+  However, if you cease all violation of this License, then your
+license from a particular copyright holder is reinstated (a)
+provisionally, unless and until the copyright holder explicitly and
+finally terminates your license, and (b) permanently, if the copyright
+holder fails to notify you of the violation by some reasonable means
+prior to 60 days after the cessation.
+
+  Moreover, your license from a particular copyright holder is
+reinstated permanently if the copyright holder notifies you of the
+violation by some reasonable means, this is the first time you have
+received notice of violation of this License (for any work) from that
+copyright holder, and you cure the violation prior to 30 days after
+your receipt of the notice.
+
+  Termination of your rights under this section does not terminate the
+licenses of parties who have received copies or rights from you under
+this License.  If your rights have been terminated and not permanently
+reinstated, you do not qualify to receive new licenses for the same
+material under section 10.
+
+  9. Acceptance Not Required for Having Copies.
+
+  You are not required to accept this License in order to receive or
+run a copy of the Program.  Ancillary propagation of a covered work
+occurring solely as a consequence of using peer-to-peer transmission
+to receive a copy likewise does not require acceptance.  However,
+nothing other than this License grants you permission to propagate or
+modify any covered work.  These actions infringe copyright if you do
+not accept this License.  Therefore, by modifying or propagating a
+covered work, you indicate your acceptance of this License to do so.
+
+  10. Automatic Licensing of Downstream Recipients.
+
+  Each time you convey a covered work, the recipient automatically
+receives a license from the original licensors, to run, modify and
+propagate that work, subject to this License.  You are not responsible
+for enforcing compliance by third parties with this License.
+
+  An "entity transaction" is a transaction transferring control of an
+organization, or substantially all assets of one, or subdividing an
+organization, or merging organizations.  If propagation of a covered
+work results from an entity transaction, each party to that
+transaction who receives a copy of the work also receives whatever
+licenses to the work the party's predecessor in interest had or could
+give under the previous paragraph, plus a right to possession of the
+Corresponding Source of the work from the predecessor in interest, if
+the predecessor has it or can get it with reasonable efforts.
+
+  You may not impose any further restrictions on the exercise of the
+rights granted or affirmed under this License.  For example, you may
+not impose a license fee, royalty, or other charge for exercise of
+rights granted under this License, and you may not initiate litigation
+(including a cross-claim or counterclaim in a lawsuit) alleging that
+any patent claim is infringed by making, using, selling, offering for
+sale, or importing the Program or any portion of it.
+
+  11. Patents.
+
+  A "contributor" is a copyright holder who authorizes use under this
+License of the Program or a work on which the Program is based.  The
+work thus licensed is called the contributor's "contributor version".
+
+  A contributor's "essential patent claims" are all patent claims
+owned or controlled by the contributor, whether already acquired or
+hereafter acquired, that would be infringed by some manner, permitted
+by this License, of making, using, or selling its contributor version,
+but do not include claims that would be infringed only as a
+consequence of further modification of the contributor version.  For
+purposes of this definition, "control" includes the right to grant
+patent sublicenses in a manner consistent with the requirements of
+this License.
+
+  Each contributor grants you a non-exclusive, worldwide, royalty-free
+patent license under the contributor's essential patent claims, to
+make, use, sell, offer for sale, import and otherwise run, modify and
+propagate the contents of its contributor version.
+
+  In the following three paragraphs, a "patent license" is any express
+agreement or commitment, however denominated, not to enforce a patent
+(such as an express permission to practice a patent or covenant not to
+sue for patent infringement).  To "grant" such a patent license to a
+party means to make such an agreement or commitment not to enforce a
+patent against the party.
+
+  If you convey a covered work, knowingly relying on a patent license,
+and the Corresponding Source of the work is not available for anyone
+to copy, free of charge and under the terms of this License, through a
+publicly available network server or other readily accessible means,
+then you must either (1) cause the Corresponding Source to be so
+available, or (2) arrange to deprive yourself of the benefit of the
+patent license for this particular work, or (3) arrange, in a manner
+consistent with the requirements of this License, to extend the patent
+license to downstream recipients.  "Knowingly relying" means you have
+actual knowledge that, but for the patent license, your conveying the
+covered work in a country, or your recipient's use of the covered work
+in a country, would infringe one or more identifiable patents in that
+country that you have reason to believe are valid.
+
+  If, pursuant to or in connection with a single transaction or
+arrangement, you convey, or propagate by procuring conveyance of, a
+covered work, and grant a patent license to some of the parties
+receiving the covered work authorizing them to use, propagate, modify
+or convey a specific copy of the covered work, then the patent license
+you grant is automatically extended to all recipients of the covered
+work and works based on it.
+
+  A patent license is "discriminatory" if it does not include within
+the scope of its coverage, prohibits the exercise of, or is
+conditioned on the non-exercise of one or more of the rights that are
+specifically granted under this License.  You may not convey a covered
+work if you are a party to an arrangement with a third party that is
+in the business of distributing software, under which you make payment
+to the third party based on the extent of your activity of conveying
+the work, and under which the third party grants, to any of the
+parties who would receive the covered work from you, a discriminatory
+patent license (a) in connection with copies of the covered work
+conveyed by you (or copies made from those copies), or (b) primarily
+for and in connection with specific products or compilations that
+contain the covered work, unless you entered into that arrangement,
+or that patent license was granted, prior to 28 March 2007.
+
+  Nothing in this License shall be construed as excluding or limiting
+any implied license or other defenses to infringement that may
+otherwise be available to you under applicable patent law.
+
+  12. No Surrender of Others' Freedom.
+
+  If conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License.  If you cannot convey a
+covered work so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you may
+not convey it at all.  For example, if you agree to terms that obligate you
+to collect a royalty for further conveying from those to whom you convey
+the Program, the only way you could satisfy both those terms and this
+License would be to refrain entirely from conveying the Program.
+
+  13. Use with the GNU Affero General Public License.
+
+  Notwithstanding any other provision of this License, you have
+permission to link or combine any covered work with a work licensed
+under version 3 of the GNU Affero General Public License into a single
+combined work, and to convey the resulting work.  The terms of this
+License will continue to apply to the part which is the covered work,
+but the special requirements of the GNU Affero General Public License,
+section 13, concerning interaction through a network will apply to the
+combination as such.
+
+  14. Revised Versions of this License.
+
+  The Free Software Foundation may publish revised and/or new versions of
+the GNU General Public License from time to time.  Such new versions will
+be similar in spirit to the present version, but may differ in detail to
+address new problems or concerns.
+
+  Each version is given a distinguishing version number.  If the
+Program specifies that a certain numbered version of the GNU General
+Public License "or any later version" applies to it, you have the
+option of following the terms and conditions either of that numbered
+version or of any later version published by the Free Software
+Foundation.  If the Program does not specify a version number of the
+GNU General Public License, you may choose any version ever published
+by the Free Software Foundation.
+
+  If the Program specifies that a proxy can decide which future
+versions of the GNU General Public License can be used, that proxy's
+public statement of acceptance of a version permanently authorizes you
+to choose that version for the Program.
+
+  Later license versions may give you additional or different
+permissions.  However, no additional obligations are imposed on any
+author or copyright holder as a result of your choosing to follow a
+later version.
+
+  15. Disclaimer of Warranty.
+
+  THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY
+APPLICABLE LAW.  EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT
+HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY
+OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,
+THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+PURPOSE.  THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM
+IS WITH YOU.  SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF
+ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
+
+  16. Limitation of Liability.
+
+  IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS
+THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY
+GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE
+USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF
+DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD
+PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS),
+EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF
+SUCH DAMAGES.
+
+  17. Interpretation of Sections 15 and 16.
+
+  If the disclaimer of warranty and limitation of liability provided
+above cannot be given local legal effect according to their terms,
+reviewing courts shall apply local law that most closely approximates
+an absolute waiver of all civil liability in connection with the
+Program, unless a warranty or assumption of liability accompanies a
+copy of the Program in return for a fee.
+
+                     END OF TERMS AND CONDITIONS
+
+            How to Apply These Terms to Your New Programs
+
+  If you develop a new program, and you want it to be of the greatest
+possible use to the public, the best way to achieve this is to make it
+free software which everyone can redistribute and change under these terms.
+
+  To do so, attach the following notices to the program.  It is safest
+to attach them to the start of each source file to most effectively
+state the exclusion of warranty; and each file should have at least
+the "copyright" line and a pointer to where the full notice is found.
+
+    <one line to give the program's name and a brief idea of what it does.>
+    Copyright (C) <year>  <name of author>
+
+    This program is free software: you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation, either version 3 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+Also add information on how to contact you by electronic and paper mail.
+
+  If the program does terminal interaction, make it output a short
+notice like this when it starts in an interactive mode:
+
+    <program>  Copyright (C) <year>  <name of author>
+    This program comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
+    This is free software, and you are welcome to redistribute it
+    under certain conditions; type `show c' for details.
+
+The hypothetical commands `show w' and `show c' should show the appropriate
+parts of the General Public License.  Of course, your program's commands
+might be different; for a GUI interface, you would use an "about box".
+
+  You should also get your employer (if you work as a programmer) or school,
+if any, to sign a "copyright disclaimer" for the program, if necessary.
+For more information on this, and how to apply and follow the GNU GPL, see
+<http://www.gnu.org/licenses/>.
+
+  The GNU General Public License does not permit incorporating your program
+into proprietary programs.  If your program is a subroutine library, you
+may consider it more useful to permit linking proprietary applications with
+the library.  If this is what you want to do, use the GNU Lesser General
+Public License instead of this License.  But first, please read
+<http://www.gnu.org/philosophy/why-not-lgpl.html>.

LICENSE_RELEASE.md

@@ -0,0 +1,212 @@
+This document outlines the license of IronOS and its dependencies.
+
+- IronOS: GPL-3.0-only
+- FreeRTOS Kernel: MIT
+- FUSB302 driver: Apache-2.0
+- CMSIS + STM32F1xx HAL driver: BSD-3-Clause
+- NMSIS: Apache-2.0
+- GD32VF103 board files: BSD-3-Clause
+- WenQuanYi Bitmap Song font: GPL-2.0-or-later
+- BriefLZ compression library: Zlib
+
+The source code of IronOS can be obtained on the [IronOS GitHub repo][gh].
+
+[gh]: https://github.com/Ralim/IronOS
+
+
+IronOS
+---
+
+Copyright (c) 2016-2020 Ben V. Brown and contributors
+
+For the license text, see `LICENSE` file.
+
+
+FreeRTOS Kernel
+---
+
+```
+Copyright (C) 2020 Amazon.com, Inc. or its affiliates.  All Rights Reserved.
+
+Permission is hereby granted, free of charge, to any person obtaining a copy of
+this software and associated documentation files (the "Software"), to deal in
+the Software without restriction, including without limitation the rights to
+use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
+the Software, and to permit persons to whom the Software is furnished to do so,
+subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in al
+copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITN
+FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS O
+COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHE
+IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+```
+
+
+FUSB302 driver
+---
+
+```
+PD Buddy Firmware Library - USB Power Delivery for everyone
+Copyright 2017-2018 Clayton G. Hobbs
+
+Licensed under the Apache License, Version 2.0 (the "License");
+you may not use this file except in compliance with the License.
+You may obtain a copy of the License at
+
+    http://www.apache.org/licenses/LICENSE-2.0
+
+Unless required by applicable law or agreed to in writing, software
+distributed under the License is distributed on an "AS IS" BASIS,
+WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+See the License for the specific language governing permissions and
+limitations under the License.
+```
+
+
+CMSIS + STM32F1xx HAL driver
+---
+
+* Only applies to TS100, TS80 and TS80P releases.
+
+```
+COPYRIGHT(c) 2017 STMicroelectronics
+
+Redistribution and use in source and binary forms, with or without dification,
+are permitted provided that the following conditions are met:
+  1. Redistributions of source code must retain the above copyright notice,
+     this list of conditions and the following disclaimer.
+  2. Redistributions in binary form must reproduce the above copyright notice,
+     this list of conditions and the following disclaimer in the documentation
+     and/or other materials provided with the distribution.
+  3. Neither the name of STMicroelectronics nor the names of its contributors
+     may be used to endorse or promote products derived from this software
+     without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+```
+
+
+NMSIS
+---
+
+* Only applies to Pinecil releases.
+
+```
+Copyright (c) 2019 Nuclei Limited. All rights reserved.
+
+SPDX-License-Identifier: Apache-2.0
+
+Licensed under the Apache License, Version 2.0 (the License); you may
+not use this file except in compliance with the License.
+You may obtain a copy of the License at
+
+www.apache.org/licenses/LICENSE-2.0
+
+Unless required by applicable law or agreed to in writing, software
+distributed under the License is distributed on an AS IS BASIS, WITHOUT
+WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+See the License for the specific language governing permissions and
+limitations under the License.
+```
+
+GD32VF103 board files
+---
+
+* Only applies to Pinecil releases.
+
+```
+Copyright (c) 2019, GigaDevice Semiconductor Inc.
+
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+1. Redistributions of source code must retain the above copyright notice, this
+    list of conditions and the following disclaimer.
+2. Redistributions in binary form must reproduce the above copyright notice,
+    this list of conditions and the following disclaimer in the documentation
+    and/or other materials provided with the distribution.
+3. Neither the name of the copyright holder nor the names of its contributors
+    may be used to endorse or promote products derived from this software without
+    specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
+INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
+OF SUCH DAMAGE.
+```
+
+
+WenQuanYi Bitmap Song font
+---
+
+* Only applies to CJK (Chinese, Japanese and Korean) language releases.
+
+```
+Copyright (c) 2004-2010, The WenQuanYi Project 
+              Board of Trustees and Qianqian Fang
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+```
+
+
+BriefLZ compression library
+---
+
+* Only applies to multi-language builds.
+
+```
+The zlib License (Zlib)
+
+Copyright (c) 2002-2020 Joergen Ibsen
+
+This software is provided 'as-is', without any express or implied
+warranty. In no event will the authors be held liable for any damages
+arising from the use of this software.
+
+Permission is granted to anyone to use this software for any purpose,
+including commercial applications, and to alter it and redistribute it
+freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must
+     not claim that you wrote the original software. If you use this
+     software in a product, an acknowledgment in the product
+     documentation would be appreciated but is not required.
+
+  2. Altered source versions must be plainly marked as such, and must
+     not be misrepresented as being the original software.
+
+  3. This notice may not be removed or altered from any source
+     distribution.
+```

PULL_REQUEST_TEMPLATE.md

@@ -0,0 +1,18 @@
+
+<!-- Please try and fill out this template where possible, not all fields are required and can be removed. -->
+
+* **Please check if the PR fulfills these requirements**
+- [] The changes have been tested locally
+- [] There are no breaking changes
+
+* **What kind of change does this PR introduce?**
+<!-- (Bug fix, feature, docs update, ...) -->
+
+
+
+* **What is the current behavior?**
+<!-- (You can also just link to an open issue here) -->
+
+* **What is the new behavior (if this is a feature change)?**
+
+* **Other information**:

README.md

@@ -1,152 +1,92 @@
-# TS100
-This is a complete rewrite of the open source software for the ts100 soldering iron.
-The version two fork of this code has no shared code with the original firmware from Miniware (E-design) group.
-This project is concidered feature complete for use as a soldering iron, *so please suggest any feature improvements you would like!*
+![CI](https://github.com/Ralim/ts100/workflows/CI%20Build%20all/badge.svg)
+![GitHub all](https://img.shields.io/github/downloads/ralim/IronOS/total)
+![Latest Release](https://img.shields.io/github/v/release/ralim/IronOS)
 
-A short(ish) video that goes through every single menu option in the firmware is available [over here](https://www.youtube.com/watch?v=WlnpboYfxNk). 
-This video was created on an earlier 1.x version of the firmware, so alot has changed and a new video will be coming soon for the 2.x fork.
+# IronOS - Flexible Soldering iron control Firmware
 
-*This firmware does **NOT** support the usb port while running for changing settings. This is done through the onscreen menu only. Logos are edited using the tool or python script and uploaded in DFU mode.*
+_This repository was formerly known as TS100, it's the same great code. Just with more supported devices_
 
-*Please note that when running the iron off a Lithium battery pack, the Iron is only rated to 24V input. So using a fully charged 6S battery *slightly* exceeds this rating, and is done so at your own risk.
-Please calibrate your irons voltage reading when you are using a lithium battery after any firmware upgrades.*
+Originally conceived as an alternative firmware for the TS100, this firmware has evolved into a complex soldering iron control firmware.
 
-## Features
-* PID iron temperature control
-* Automatic sleep with selectable sensitivity
-* Motion wake support
-* Settings menu on the unit
-* Set a voltage lower limit for Lithium batteries so you dont kill your battery pack
-* All settings saved to flash when you exit the menu
-* Improved readability Fonts
-* Use hardware features to improve reliability
-* Can disable movement detection if desired
-* Calibration of the thermocouple offset
-* Boost mode lets you temporarily change the temperature when soldering (ie raise temperature for short periods of time)
-* Battery charge level indicatior if power source set to a lipo cell count.
-* Custom bootup logo support
-* Automatic LCD rotation based on orientation
+The firmware implements all of the standard features of a "smart" soldering iron, with lots of little extras and tweaks.
+I highly recommend reading the installation guide fully when installing on your iron. And after install just explore the settings menu.
 
-## Upgrading your ts100 iron
+For soldering irons that are designed to be powered by "smart" power sources (QC and PD), the firmware supports settings around the negotiated power and voltage.
+For soldering irons that are designed to be powered by batteries (TS100), settings for a cutoff voltage for battery protection are supported.
 
-This is completely safe, if it goes wrong just put the .hex file from the official website onto the unit and your back to the old firmware. Downloads for the hex files to flash are available on the [releases page.](https://github.com/Ralim/ts100/releases) The file you want is called *ts100.hex* unless you want the translations, they are ts100_*language short name*.hex.
+There are 25 languages currently supported as of present. When downloading the firmware for your soldering iron take note of the language code in the file name.
 
-Officially the bootloader on the iron only works under windows. However, users have reported that it does work under Mac, and can be made to work under Linux *sometimes*. Details over on the [wiki page](https://github.com/Ralim/ts100/wiki/Upgrading-Firmware).
+This project is considered feature complete for use as a soldering iron, _so please suggest any feature improvements you would like!_
 
-1. Hold the button closest to the tip, and plug in the USB to the computer.
-2. The unit will appear as a USB drive.
-3. Drag the .hex file onto the USB drive.
-4. The unit will disconnect and reconnect.
-5. The filename will have changed to end in .RDY or .ERR 
-6. If it ends with .RDY you're done! Otherwise something went wrong.
-7. Disconnect the USB and power up the iron. You're good to go.
+_This firmware does **NOT** support the USB port while running for changing settings. This is done through the onscreen menu only. Logos are edited using the tool or python script and uploaded in DFU mode._
 
-For the more adventurerous out there, you can also load this firmware onto the device using a SWD programmer.
-On the bottom of the MCU riser pcb, there are 4 pads for programming.
-There is a complete device flash backup included in this repository. (Note this includes the bootloader, so will need a SWD programmer to load onto the unit). Please do not use the backup of the bootloader for anything malicious, its only saved here for those who are tinkering with their iron and decide to replace it.
+To get started with this firmware, please jump over to [here](Documentation/GettingStarted.md)
 
-## Setting a custom bootup image
+## Key Features
 
-This firmware uses a different method of updating the bootup image.
-This removes the need for emulating a USB drive on the iron just to allow for a bootup image to be setup.
-There are further instructions on the [wiki](https://github.com/Ralim/ts100/wiki/Logo-Editor). Instructions are kept on the wiki so that users can update the information if they find extra helpful information.
+- PID style iron temperature control
+- Automatic sleep with selectable sensitivity
+- Motion wake support
+- All settings exposed in the intuitive menu
+- (TS100) Set a voltage lower limit for Lithium batteries so you don't kill your battery pack
+- (TS80) Set 18W or 24W settings for your power bank
+- (TS80P) Automatically negotiates appropriate PD and falls back to QC mode like TS80
+- (Pinecil) Supports all 3 power modes (PD, QC, DC In).
+- Improved readability Fonts, supporting multiple languages
+- Use hardware features to improve reliability
+- Can disable movement detection if desired
+- Boost mode lets you temporarily change the temperature when soldering (i.e. raise the temperature for short periods)
+- (TS100/Pinecil) Battery charge level indicator if power source set to a lipo cell count
+- (TS80/TS80P/Pinecil) Power bank operating voltage is displayed
+- [Custom boot up logo support](Documentation/Logo.md)
+- Automatic LCD rotation based on the orientation
 
-## New Menu System
+## Installation
+
+For notes on installation for your device, please refer to the [Flashing Guide](Documentation/Flashing.md).
+
+## Menu System
 
 This new firmware uses a new menu system to allow access to the settings on the device.
-When on the main screen, the unit shows prompts for the two most common operations.
-* Pressing the button near the tip enters soldering mode
-* Pressing the button near the USB enters the settings menu.
-* Holding the button near the tip will enter soldering temperature adjust mode (This is the same as the one in the soldering menu, just to let you edit before heating up).
-* Holding the button near the USB end will show the firmware version details.
-## Soldering mode
+When on the main screen, the unit shows a pair of prompts for the two most common operations.
 
-In this mode the iron works as you would expect, pressing either button will take you to a temperature change screen. 
-Use each button to go up and down in temperature. Pressing both buttons will exit you from the temperature menu (or wait 3 seconds and it will time out).
-Pressing both buttons or holding the button near the USB will exit the soldering mode.
-Holding the button at the front of the iron will enter boost mode (if enabled).
-
-## Settings Menu
-
-This menu allows you to cycle through all the options and set their values.
-The button near the USB cycles through the options, and the one near the tip changes the selected option.
-Note that settings are not saved until you exit the menu, and some settings such as screen flip do not apply until a power cycle is applied.
-If you leave the unit alone (ie don't press any buttons) on a setting, after 3 seconds the screen will scroll a longer version of the name
-
-* PWRSC -> Power source, select a cell count if using a LiPo, or DC to disable the shutdown. (Sets it to minimum of 10V).
-* STMP -> The temperature the unit drops to in sleep mode
-* SLTME -> Sleep time, how long it takes before the unit goes to sleep
-* SHTME -> Shutdown Time, how long the unit will wait after movement before shutting down completely
-* MSENSE -> Motion Sensitivity,0*9,0 means motion sensing is turned off, 9 is most sensitive, 1 is least sensitive (ie takes more movement to trigger)
-* ADVDSP -> Enable the advanced display (shows more details)
-* DSPROT -> Display rotation mode, Automatic, Left handed or Right handed
-* BOOST -> Enable boost mode
-* BTMP -> Set the temperature for the boost mode
-* ASART -> Automatically start the unit when power is applied (i.e. the unit will go straight into soldering mode)
-* CLBLNK -> Blink the screen as an alert when cooling down
-* TMP CAL -> Use to calibrate offset on the tip temperature
-* RESET -> Use to force a complete reset on exit of the settings menu
-* TMPUNIT -> Temperature unit, C or F
-
-### Calibrating input voltage
-
-Due to the tolerance on the resistors used for the input voltage divider, some irons can be up to 0.6V out on the voltage measurement.
-Please calibrate your iron if you have any issues with the cutoff voltage. 
-Note that cutoff messages can also be triggered by using a power supply that is too weak and fails under the load of the iron.
-This is more critical than before with the new cell count based cutout voltage.
-
-To calibrate your Iron:
-
-1. Measure the input voltage with a multimeter and note it down.
-2. Connect the input to your iron.
-3. On the home screen (showing iron symbol), press both buttons simultainiously.
-4. The iron will now show the tip temperature.
-5. Press the button near the soldering iron tip.
-6. The screen will display the measured input voltage.
-7. If this is the same as what you measured before skip to step 13
-8. Otherwise, press the button near the USB end of the iron
-9. The voltage will now slowly blink.
-10. Use the buttons to adjust the reading up and down until it reads as close as possible to the voltage you measured earlier.
-11. When it is reading as close as possible, press both buttons at once.
-12. The screen will go back to just showing the input voltage.
-13. Press the button near the tip of the iron to exit back to the live temperature display.
-14. Press both buttons at once to exit back to the idle screen.
-15. You're done. Enjoy your iron.
-
-### Calibrating tip offset
-
-Some tips will have an offset on their readings, to calibrate this out perform the following steps:
-
-1. Connect power to your iron
-2. Make sure the tip is at room temperature (ie. wait for a fair while after using the iron before calibration)
-3. Enter the settings menu
-4. Scroll down to *TMP CAL*
-5. Press the button to change the option (tip button)
-6. The display will start to scroll a warning message to check that the tip is at ambient temperature!
-7. Press the button near the tip of the iron to confirm.
-8. The display will go to "...." for a short period of time as the unit measures the tip temperature and the handle temperature and compares them
-9. The display will then go back to *TMP CAL*
-10. Calibration is done, just exit the settings menu as normal 
-11. You're done. Enjoy your iron.
-
-### Boost mode
-
-This allows you to change the front key (one near the tip) to become a boost button when you hold it for > 2 seconds. This allows you to set this button to change the soldering temperature for short periods. For example when soldering a big joint and you want to boost the temperature a bit.
-
-The boost temperature is set in the settings menu.
+- Pressing the button near the tip enters the soldering mode
+- Pressing the button near the USB enters the settings menu
+- Holding the button near the tip will enter soldering temperature adjust mode (This is the same as the one in the soldering menu, just to let you edit before heating up)
+- Holding the button near the USB end will show the [debug menu](Documentation/DebugMenu.md)
 
+Detailed operation details are over in the [Menu information.](Documentation/Menu.md)
 
 ## Thanks
 
-If you love this firmware and want to continue my caffine addiction, you can do so here (or email me for other options) : https://paypal.me/RalimTek
+If you love this firmware and want to continue my caffeine addiction, you can do so [here](https://paypal.me/RalimTek) (or email me for other options).
+I also want to give a shout out to all of the [Fantastic Contributors](https://github.com/Ralim/ts100/graphs/contributors).
+
+Especially to the following users, who have helped in various ways that are massively appreciated:
+
+- [Dhiltonp](https://github.com/dhiltonp)
+- [Mrkvozrout](https://github.com/Mrkvozrout)
+- [JonnieZG](https://github.com/jonnieZG)
+- [Federck](https://github.com/federck)
+- [Jvitkauskas](https://github.com/jvitkauskas)
+- [Doegox](https://github.com/doegox)
+- [Perillamint](https://github.com/perillamint)
+- [GeminiServer](https://github.com/GeminiServer)
+- [Patrick Horlebein](https://github.com/PixelPirate)
+- [Firebie](https://github.com/Firebie)
+- [Agatti](https://github.com/agatti)
+- [Discip](https://github.com/discip)
+- [Paul Fertser](https://github.com/paulfertser)
+
+Plus the huge number of people who have contributed translations, your effort is massively appreciated.
 
 ## Licence
 
-The code in this repository that is based on the STM tools is under a BSD like licence.
-The code created by the communitiy is GNU GPLv3.
-The FreeRToS is under its own licence.
+The code created by the community is GNU GPLv3. Unless noted elsewhere.
+Other components such as FreeRTOS/USB-PD have their own licence.
 
 ## Commercial Use
 
-This software is provided as-is, so I cannot provide any commercial support for the firmware. However you are more than welcome to distribute links to the firmware, or provide irons with this software on them. 
-Please do not re-host the files, but rather link to this page, so that there are not old versions of the firmware scattered around. If this firmware does make you money, it would be nice to recieve a donation, however there is no enforcement.
+This software is provided as-is, so I cannot provide any commercial support for the firmware.
+However, you are more than welcome to distribute links to the firmware or provide irons with this software on them.
+Please do not re-host the files, but rather link to this page, so that there are no old versions of the firmware scattered around.

SECURITY.md

@@ -0,0 +1,18 @@
+# Security Policy
+
+## Supported Versions
+
+Use this section to tell people about which versions of your project are
+currently being supported with security updates.
+
+| Version | Supported          |
+| ------- | ------------------ |
+| Latest Release   | :white_check_mark: |
+| master   | :white_check_mark:                |
+
+## Reporting a Vulnerability
+
+1. Report in an issue please and tag @ralim
+2. All issues are read within 1 working week in general; often within 24 hours
+3. Issue shall recieve a comment within 14 days; but goal is < 2.
+4. Issue will be open until the vulnerability is closed in all supported versions

Translation.md

@@ -1,5 +0,0 @@
-# Translation
-If you would like to contribute a translation, look at the file `translation.c` in the source code.
-Currently translations are compiled in at compile time with #defines (nothing complex).
-So all you need to do is add another section formatted like the english one that is there and either create a pull request or a github issue for inclusion.
-If the glyphs required already exist in the fonts then support should be quick. Otherwise it may take longer for the fonts to be created.

Translations/BitmapEditor.html

@@ -0,0 +1,282 @@
+<!doctype html>
+<html>
+<head>
+	<script src="https://cdn.jsdelivr.net/npm/vue/dist/vue.js"></script>
+	<script src="translations_commons.js"></script>
+	<title>TS100 Bitmap Editor</title>
+	<style>
+		.matrix {
+			display: inline-block;
+			padding: 0px 0px 1px 1px ;
+			background-color: #666;
+			margin-top: 1em;
+			margin-bottom: 1em;
+		}
+		
+		.matrix * {
+			font-size:0;
+		}
+		.c {
+			margin:1px 1px 0px 0px;
+			display: inline-block;
+			background-color: #fff;
+			height:10px;
+			width: 10px;
+		}
+		
+		.x {
+			background-color: #000;
+		}
+		
+		.header {
+		}
+		
+		.data input, .data textarea {
+			margin-top: 1em;
+			width: 100%;
+		}
+		
+		.actions {
+		}
+	</style>
+	<script>
+	
+	var ink, pressed, ev;
+	function mousedown(e) {
+		c = window.event.target;
+		classes = c.className.split(" ");
+		if (classes.indexOf("c")<0) {
+			return;
+		}
+		ink = classes.indexOf("x")<0;
+		pressed = true;
+		ev = e;
+		enter(e);
+	}
+	
+	function mouseup(e) {
+		ev = e;
+		pressed = false;
+	}
+	
+	function enter(e) {
+		if (!pressed) {
+			return;
+		}
+		ev = e;
+		c = window.event.target;
+		paint(c, ink);
+		stringFromMatrix();
+	}
+
+	function paint(c, ink) {
+		var cellInk = isInk(c);
+		if (ink) {
+			if (!cellInk) {
+				c.className += " x";
+			}
+		} else {
+			if (cellInk) {
+				c.className = "c";
+			}
+		}
+	}
+
+	function isInk(c) {
+		try {
+			var classes = c.className.split(" ");
+			return classes.indexOf("x") >= 0;
+		} catch(e) {
+			return false;
+		}
+	}
+	
+	function getMatrix() {
+		return document.getElementById("matrix");
+	}
+	
+	function getCoordinatesFromId(str) {
+		i = str.indexOf('_');
+		return {
+			row: parseInt(str.substring(1, i)),
+ 			col: parseInt(str.substring(i+1))
+		}
+	}
+
+	function clearMatrix() {
+		for (var r = 0; r < app.matrix.rows; r++) {
+			for (var c = 0; c < app.matrix.cols; c++) {
+				paint(getCell(r, c), false);
+			}
+		}
+	}
+	
+	function getCell(row, col) {
+		return document.getElementById("C"+row+"_"+col);
+	}
+	
+	function toMatrix(str) {
+		app.encodedData = str;
+		clearMatrix();
+		var strs = str.split(/[ ,]/);
+		var pair = false;
+		var c = 0;
+		var rs = 7;
+		for (var i = 0; i<strs.length; i++) {
+			var d = strs[i];
+			if (d.length > 0) {
+				if (startsWith(d, "0x")) {
+					v = parseInt(d.substring(2), 16);
+				} else {
+					v = parseInt(d);
+				}
+				sv = padLeft(v.toString(2), "0", 8);
+				for (r = 0; r < 8; r++) {
+					paint(getCell(rs - r, c), sv.charAt(r) == '1');
+				}
+				c++;
+				if (c >= app.matrix.cols) {
+					c = 0;
+					rs += 8;
+				}
+			}
+		}
+		stringFromMatrix(true, false);
+	}
+	
+	function escapedToMatrix(str) {
+		app.encodedEscapeSequence = str;
+		clearMatrix();
+		var strs = str.split("\\x");
+		var c = 0;
+		var rs = 7;
+		for (var i = 0; i<strs.length; i++) {
+			var d = strs[i];
+			if (d.length > 0) {
+				v = parseInt(d, 16);
+				sv = padLeft(v.toString(2), "0", 8);
+				for (r = 0; r < 8; r++) {
+					paint(getCell(rs - r, c), sv.charAt(r) == '1');
+				}
+				c++;
+				if (c >= app.matrix.cols) {
+					c = 0;
+					rs += 8;
+				}
+			}
+		}
+		stringFromMatrix(false, true);
+	}
+
+	function stringFromMatrix(skipEncodedData, skipEncodedEscapeSequence) {
+		var str = "";
+		var strEscaped = "";
+		var delim = "";
+		var blocks = app.matrix.rows / 8;
+		var rs = 7;
+		for (var block = 0; block < blocks; block++) {
+			for (var c = 0; c < app.matrix.cols; c++) {
+				var b = 0;
+				for (var r = 0; r < 8; r++) {
+					var cell = document.getElementById("C"+(rs-r)+"_"+c);
+					if (isInk(cell)) {
+						b |= (1 << (7-r));
+					}
+				}
+				str += delim + "0x" + padLeft(b.toString(16).toUpperCase(), "0", 2);
+				strEscaped += "\\x" + padLeft(b.toString(16).toUpperCase(), "0", 2);
+				delim = ",";
+			}
+			rs += 8;
+		}
+		if (!skipEncodedData) {
+			app.encodedData = str;
+		}
+		if (!skipEncodedEscapeSequence) {
+			app.encodedEscapeSequence = strEscaped;
+		}
+		return str;
+	}
+	
+	function start() {
+		app = new Vue({
+			el : '#app',
+			data : {
+				matrix: {
+					cols: 12,
+					rows: 16
+				},
+				type: "big",
+				encodedData: "",
+				encodedEscapeSequence: "",
+			},
+			methods : {
+				VtoMatrix : function(val) {
+					toMatrix(val);
+				},
+				escapedToMatrix : function(val) {
+					escapedToMatrix(val);
+				},
+				
+				VchangeSize : function() {
+					if (app.type == "big") {
+						app.matrix.cols = 12;
+						app.matrix.rows = 16;
+					} else if (app.type == "small") {
+						app.matrix.cols = 6;
+						app.matrix.rows = 8;
+					} else if (app.type == "icon") {
+						app.matrix.cols = 16;
+						app.matrix.rows = 16;
+					} else if (app.type == "icon24") {
+						app.matrix.cols = 24;
+						app.matrix.rows = 16;
+					} else if (app.type == "screen") {
+						app.matrix.cols = 84;
+						app.matrix.rows = 16;
+					} else if (app.type == "fullscreen") {
+						app.matrix.cols = 96;
+						app.matrix.rows = 16;
+					}
+					stringFromMatrix();
+				}
+				
+			}
+		});
+		toMatrix("0x00,0xF0,0x08,0x0E,0x02,0x02,0x02,0x02,0x0E,0x08,0xF0,0x00,0x00,0x3F,0x40,0x5C,0x5C,0x5C,0x5C,0x5C,0x5C,0x40,0x3F,0x00");
+	}
+
+	window.onload=start; 
+	</script>
+
+	
+</head>
+<body>
+	<div id="app">
+		<div class="header">
+			<select v-model="type" v-on:change="VchangeSize()">
+				<option value="small">Small Font (6x8)</option>
+				<option value="big">Big Font (12x16)</option>
+				<option value="icon">Icon (16x16)</option>
+				<option value="icon24">Icon (24x16)</option>
+				<option value="screen">Screen (84x16)</option>
+				<option value="fullscreen">Full Screen (96x16)</option>
+			</select>
+		</div>
+		<div id="matrix" class="matrix" onmousedown="mousedown(this)" onmouseup="mouseup(this)" ondragstart="return false">
+			<div :id="'R'+(r-1)" class="r" v-for="r in matrix.rows">
+				<div :id="'C'+(r-1)+'_'+(c-1)" class="c" onmouseenter="enter(this)" v-for="c in matrix.cols"></div>
+			</div>
+		</div>
+		<div class="actions">
+			<input type="button" value="Clear" onclick="clearMatrix();stringFromMatrix()">
+		</div>
+		<div class="data">
+			<textarea v-model="encodedData" style="width:100%" v-on:change="VtoMatrix(encodedData)" rows=5></textarea>
+			<textarea v-model="encodedEscapeSequence" style="width:100%" v-on:change="escapedToMatrix(encodedEscapeSequence)" rows=5></textarea>
+		</div>
+	</div>
+		
+	
+</body>
+</html>

Translations/README.md

@@ -0,0 +1,11 @@
+### CJK Notes
+
+Unlike Latin and Cyrillic scripts, CJK Unified Ideographs cannot be legibly
+displayed using the small font, which is only 6x8px in size. Therefore, Hanzi,
+Kanji and Hanja can only be displayed using the 12x16px large font.
+
+By default, menu items are shown using two lines of text with the small font.
+When translating such items for CJK, leave the first line empty and put the
+translated text on the second line. This way, the firmware will automatically
+know to display the text using the large font. This also applies to the
+`SettingsResetMessage` text -- just start the message with `\n`.

Translations/TranslationEditor.html

@@ -0,0 +1,439 @@
+<!DOCTYPE html>
+<html>
+
+	<head>
+		<meta charset="UTF-8">
+		<title>IronOS Translation Editor</title>
+
+		<script src="https://cdn.jsdelivr.net/npm/vue/dist/vue.js"></script>
+		<script src="translations_commons.js"></script>
+		<script src="translations_def.js"></script>
+		<script>
+
+	var app;
+	var defMap = {};
+	
+	function save(){
+		saveJSON(app.current, "translation_"+app.current.languageCode.toLowerCase()+".json");
+	}
+
+	function view(){
+		showJSON(app.current, "translation_"+app.current.languageCode.toLowerCase()+".json");
+	}
+
+	function fileChanged(e) {
+		var target = e;
+		var id = target.id;
+		
+		var file = target.files[0];
+		if (!file) {
+			return;
+		}
+		var fr = new FileReader();
+		fr.onload = function(e) {
+			try {
+				var json = JSON.parse(e.target.result);
+			} catch (ex) {
+				console.log(ex);
+				alert("Invalid JSON file: " + file.name);
+				return;
+			}
+				
+
+			if (id == "referent-lang-file") {
+				if (checkTranslationFile(file.name)) {
+					app.referent = json;
+					app.meta.referentLoaded = true;
+				}
+			} else if (id == "current-lang-file") {
+				if (checkTranslationFile(file.name)) {
+					app.current = json;
+					if (!app.current.fonts){
+						app.current.fonts = ["ascii_basic"];
+					}
+					app.meta.currentLoaded = true;
+				}
+			} 		
+			synchronizeData();
+		}
+		fr.readAsText(file);
+		
+	}
+	
+	function synchronizeData() {
+		app.obsolete = {};
+		copyMissing(app.def.messages, app.referent.messages, app.current.messages);
+		copyMissing(app.def.characters, app.referent.characters, app.current.characters);
+		copyMissing(app.def.menuGroups, app.referent.menuGroups, app.current.menuGroups);
+		copyMissing(app.def.menuOptions, app.referent.menuOptions, app.current.menuOptions);
+	}
+	
+	/**
+	 * Copy all missing properties from referent to current
+	 * for each entry in definition
+	 */
+	function copyMissing(defList, referentMap, currentMap) {
+		if (!isDefined(defList) || !isDefined(referentMap) || !isDefined(currentMap)) {
+			return;
+		}
+		var len = defList.length;
+		for (var i = 0; i < len; i++) {
+			var id = defList[i].id;
+			if (!isDefined(referentMap[id])) {
+				referentMap[id] = '';
+			}
+			if (!isDefined(currentMap[id])) {
+				currentMap[id] = referentMap[id];
+			}
+		}
+		processObsolete(defList, currentMap);
+	}
+
+	// Passes through all entries from the given map.
+	// If a corresponding entry is not found in the defList, it is removed from the map, and added into the obsolete map.
+	function processObsolete(defList, map) {
+		// Index list to map for faster search
+		var defMap = copyArrayToMap(defList);
+		Object.keys(map).forEach(function(key) {
+			if (!isDefined(defMap[key])) {
+				app.obsolete[key] = { id : key, value : map[key]};
+				delete map[key];
+			}
+		});
+	}
+
+	function length(obj, mode) {
+		if (!isDefined(mode) || mode == 0) {
+			// return direct length
+			return obj.length;
+		} 
+		// return the longest length in text2 array
+		return Math.max(isDefinedNN(obj.text2[0]) ? obj.text2[0].length : 0, isDefinedNN(obj.text2[1]) ? obj.text2[1].length : 0);
+	
+	}
+	
+	function getAttribute(obj, attribute) {
+		var d =  "2";
+		var v = obj[attribute+d];
+		if (isDefined(v))
+			return v;
+		return obj[attribute];
+	}
+	
+	function loaded() {
+		app = new Vue({
+			el : '#app',
+			data : {
+				meta : {
+					referentLoaded : false,
+					currentLoaded : false,
+				},
+				def : {
+				},
+				referent : {
+					messages : {}
+				},
+				current : {
+					loaded: false,
+				},
+				obsolete : {},
+				fontToAdd: "latin_extended",
+			},
+			methods : {
+				validateInput: function(valMap, id, mode) {
+					var d = defMap[id];
+					var vLen = 0;
+					if (!isDefined(mode))
+						mode = 0;
+						
+					try {
+						// Sum for complex length
+						for (var i = 0; i < d.lenSum.fields.length; i++) {
+							vLen += length(valMap[d.lenSum.fields[i]], mode);
+						}
+						d = d.lenSum;
+					} catch (e) {
+						// Single field length
+						vLen = length(valMap[id], mode);
+					}
+					var maxLen = getAttribute(d, 'maxLen', mode == 2);
+					var minLen = getAttribute(d, 'minLen', mode == 2);
+					var len = getAttribute(d, 'len', mode == 2);
+					if (isNumber(maxLen) && vLen > maxLen
+						|| isNumber(minLen) && vLen < minLen
+						|| isNumber(len) && vLen != len
+						) {
+						return "invalid";
+					}
+				},
+				
+				constraintString: function(e) {
+					var str = "";
+					var delim = "";
+					var v;
+					d = "2";
+					if (isDefinedNN(e.lenSum)) {
+						str = "len("+(e.lenSum.fields+"").replace(/,/g," + ")+") -> ";
+						e = e.lenSum;
+					}
+					v = getAttribute(e, 'len', d);
+					if (isNumber(v)) {
+						str += delim + "len=" + v;
+						delim = " and ";
+					}
+					v = getAttribute(e, 'minLen', d);
+					if (isNumber(v)) {
+						str += delim + "len>=" + v;
+						delim = " and ";
+					}
+					v = getAttribute(e, 'maxLen', d);
+					if (isNumber(v)) {
+						str += delim + "len<=" + v;
+						delim = " and ";
+					}
+					return str;
+				},
+
+				getWholeScreenMessageMaxLen: function(valMap, id, prop) {
+					var v = prop ? valMap[id][prop] : valMap[id];
+					var maxLen;
+					if (this.isSmall(v)) {
+						maxLen = defMap[id].maxLen2 || 16;
+					} else {
+						maxLen = defMap[id].maxLen || 8;
+					}
+					return maxLen;
+				},
+
+				validateWholeScreenMessage: function(valMap, id, prop) {
+					var v = prop ? valMap[id][prop] : valMap[id];
+					var maxLen = this.getWholeScreenMessageMaxLen(valMap, id, prop);
+					if (this.isSmall(v)) {
+						if (v[0].length === 0) {
+							return "invalid";
+						} else if (Math.max(v[0].length, v[1].length) > maxLen) {
+							return "invalid";
+						}
+					} else {
+						if (v.length > maxLen) {
+							return "invalid";
+						}
+					}
+				},
+
+				constraintWholeScreenMessage: function(valMap, id, prop) {
+					return "len <= " + this.getWholeScreenMessageMaxLen(valMap, id, prop);
+				},
+
+				isSmall: function(v) {
+					return v instanceof Array;
+				},
+
+				convertToLarge: function(valMap, id, prop) {
+					var v = prop ? valMap[id][prop] : valMap[id];
+					var message = v[0] + (v[1] !== "" ? " " + v[1] : "");
+					if (prop) {
+						valMap[id][prop] = message;
+					} else {
+						valMap[id] = message;
+					}
+				},
+
+				convertToSmall: function(valMap, id, prop) {
+					var v = prop ? valMap[id][prop] : valMap[id];
+					var message = [ v, "" ];
+					if (prop) {
+						valMap[id][prop] = message;
+					} else {
+						valMap[id] = message;
+					}
+				},
+
+				removeFont: function(i) {
+					this.current.fonts.splice(i, 1);
+				},
+
+				addFont: function() {
+					this.current.fonts.push(this.fontToAdd);
+				},
+			}
+		});
+		app.def = def;
+		copyArrayToMap(app.def.messages, defMap);
+		copyArrayToMap(app.def.messagesWarn, defMap);
+		copyArrayToMap(app.def.characters, defMap);
+		copyArrayToMap(app.def.menuGroups, defMap);
+		copyArrayToMap(app.def.menuOptions, defMap);
+	}
+	
+	window.onload=loaded;
+</script>
+	<link href="translations.css" rel="stylesheet" type="text/css">
+	</head>
+	<body>
+
+		<div id="app">
+			<h1>IronOS Translation Editor<span v-if="meta.currentLoaded"> - {{ current.languageLocalName }} [{{current.languageCode}}]</span></h1>
+			<table class="header data">
+				<tr>
+					<td class="label">Referent Language</td>
+					<td class="value">
+						<input type="file" id="referent-lang-file" onchange="fileChanged(this)" accept=".json">
+						<span class="selected" v-if="meta.referentLoaded">{{ referent.languageLocalName }} [{{referent.languageCode}}]</span>
+					</td>
+				</tr>
+				<tr v-if="meta.referentLoaded">
+					<td class="label">Current Language</td>
+					<td class="value">
+						<input type="file" id="current-lang-file" onchange="fileChanged(this)" accept=".json">
+						<span class="selected" v-if="meta.currentLoaded">{{ current.languageLocalName }} [{{current.languageCode}}]</span>
+					</td>
+				</tr>
+				<tr v-if="meta.currentLoaded">
+					<td class="label">Local Language Code</td>
+					<td class="value"><input type="text" v-model="current.languageCode" maxlength="8" v-on:change="current.languageCode=current.languageCode.toUpperCase()" class="short"></td>
+				</tr>
+				<tr v-if="meta.currentLoaded">
+					<td class="label">Local Language Name</td>
+					<td class="value"><input type="text" v-model="current.languageLocalName" class="short"></td>
+				</tr>
+				<tr v-if="meta.currentLoaded">
+					<td class="label">Font tables to use<br>("ascii_basic" must be first)</td>
+					<td class="value">
+						<ul>
+							<li v-for="(font, i) in current.fonts">
+								<button type="button" @click="removeFont(i)" :disabled="i == 0 && font == 'ascii_basic'">-</button> {{ font }}
+							</li>
+						</ul>
+						<select v-model="fontToAdd">
+							<!-- <option value="ascii_basic">ascii_basic: ASCII Basic</option> -->
+							<option value="latin_extended">latin_extended: Latin Extended</option>
+							<option value="cyrillic">cyrillic: Cyrillic Glyphs</option>
+							<option value="cjk">cjk: Chinese/Japanese/Korean</option>
+						</select>
+						<button type="button" @click="addFont()">Add</button>
+					</td>
+				</tr>
+			</table>
+			
+			<div v-if="def.messages && referent.messages && current.messages">
+
+				<div class="footer">
+					<input type="button" value="Save" onclick="save()">
+					<input type="button" value="View" onclick="view()">
+				</div>
+				
+				<div v-if="Object.keys(obsolete).length > 0">
+					<h2>Obsolete</h2>
+					<table class="data">
+						<tr v-for="entry in obsolete">
+							<td class="label"><div class="stringId">{{entry.id}}</div></td>
+							<td class="value"><div class="ref">{{entry.value}}</div></td>
+						</tr>
+					</table>
+				</div>
+
+				<h2>Messages and Strings</h2>
+				<table class="data">
+					<tr v-for="message in def.messages" v-bind:class="validateInput(current.messages, message.id)">
+						<td class="label"><div class="stringId">{{message.id}}</div></td>
+						<td class="value">
+							<div class="constraint">{{constraintString(message)}}</div>
+							<div class="ref">{{referent.messages[message.id]}}</div>
+							<div class="note" v-if="message.note">{{message.note}}</div>
+							<div class="tran"><input :id="'in_'+message.id" type="text" v-model="current.messages[message.id]" v-bind:class="{unchanged : current.messages[message.id] == referent.messages[message.id], empty : current.messages[message.id]==''}"></div>
+						</td>
+					</tr>
+				</table>
+
+				<h2>Warning Messages</h2>
+				<table class="data">
+					<tr v-for="message in def.messagesWarn" v-bind:class="validateWholeScreenMessage(current.messagesWarn, message.id)">
+						<td class="label"><div class="stringId">{{message.id}}</div></td>
+						<td class="value">
+							<div class="constraint">{{constraintWholeScreenMessage(current.messagesWarn, message.id)}}</div>
+							<div class="ref">{{referent.messagesWarn[message.id]}}</div>
+							<div class="note" v-if="message.note">{{message.note}}</div>
+							<div class="tran" v-if="isSmall(current.messagesWarn[message.id])">
+								<input :id="'in_'+message.id+'_0'" type="text" v-model="current.messagesWarn[message.id][0]" v-bind:class="{unchanged : current.messagesWarn[message.id][0] == referent.messagesWarn[message.id][0] && current.messagesWarn[message.id][1] == referent.messagesWarn[message.id][1], empty : current.messagesWarn[message.id][0] == '' && current.messagesWarn[message.id][1] == ''}">
+								<input :id="'in_'+message.id+'_1'" type="text" v-model="current.messagesWarn[message.id][1]" v-bind:class="{unchanged : current.messagesWarn[message.id][0] == referent.messagesWarn[message.id][0] && current.messagesWarn[message.id][1] == referent.messagesWarn[message.id][1], empty : current.messagesWarn[message.id][0] == '' && current.messagesWarn[message.id][1] == ''}">
+								<button type="button" @click="convertToLarge(current.messagesWarn, message.id)">Convert to large text</button>
+							</div>
+							<div class="tran" v-else>
+								<input :id="'in_'+message.id" type="text" v-model="current.messagesWarn[message.id]" v-bind:class="{unchanged : current.messagesWarn[message.id] == referent.messagesWarn[message.id], empty : current.messagesWarn[message.id]==''}">
+								<button type="button" @click="convertToSmall(current.messagesWarn, message.id)">Convert to small text</button>
+							</div>
+						</td>
+					</tr>
+				</table>
+
+				<h2>Characters</h2>
+				<table class="data">
+					<tr v-for="char in def.characters" v-bind:class="validateInput(current.characters, char.id)">
+						<td class="label"><div class="stringId">{{char.id}}</div></td>
+						<td class="value">
+							<div class="constraint">{{constraintString(char)}}</div>
+							<div class="ref">{{referent.characters[char.id]}}</div>
+							<div class="tran"><input type="text" v-model="current.characters[char.id]" v-bind:class="{unchanged : current.characters[char.id] == referent.characters[char.id], empty : current.characters[char.id].length != 1}"></div>
+						</td>
+					</tr>
+				</table>
+
+				<h2>Menu Groups</h2>
+				<table class="data">
+					<tr v-for="menu in def.menuGroups" v-bind:class="validateWholeScreenMessage(current.menuGroups, menu.id, 'text2')">
+						<td class="label"><div class="stringId">{{menu.id}}</div></td>
+						<td class="value">
+							<div class="label">Menu Name</div>
+							<div class="constraint">{{constraintWholeScreenMessage(current.menuGroups, menu.id, 'text2')}}</div>
+							<div class="ref">{{referent.menuGroups[menu.id].text2}}</div>
+							<div class="tran" v-if="isSmall(current.menuGroups[menu.id].text2)">
+								<input type="text" v-model="current.menuGroups[menu.id].text2[0]" v-bind:class="{unchanged : current.menuGroups[menu.id].text2[0] == referent.menuGroups[menu.id].text2[0] && current.menuGroups[menu.id].text2[1] == referent.menuGroups[menu.id].text2[1], empty : current.menuGroups[menu.id].text2[0] == '' && current.menuGroups[menu.id].text2[1] == ''}">
+								<input type="text" v-model="current.menuGroups[menu.id].text2[1]" v-bind:class="{unchanged : current.menuGroups[menu.id].text2[0] == referent.menuGroups[menu.id].text2[0] && current.menuGroups[menu.id].text2[1] == referent.menuGroups[menu.id].text2[1], empty : current.menuGroups[menu.id].text2[0] == '' && current.menuGroups[menu.id].text2[1] == ''}">
+								<button type="button" @click="convertToLarge(current.menuGroups, menu.id, 'text2')">Convert to large text</button>
+							</div>
+							<div class="tran" v-else>
+								<input type="text" v-model="current.menuGroups[menu.id].text2" v-bind:class="{unchanged : current.menuGroups[menu.id].text2 == referent.menuGroups[menu.id].text2, empty : current.menuGroups[menu.id].text2==''}">
+								<button type="button" @click="convertToSmall(current.menuGroups, menu.id, 'text2')">Convert to small text</button>
+							</div>
+							<div class="label">Description</div>
+							<div class="ref">{{referent.menuGroups[menu.id].desc}}</div>
+							<div class="tran"><input type="text" v-model="current.menuGroups[menu.id].desc" v-bind:class="{unchanged : current.menuGroups[menu.id].desc == referent.menuGroups[menu.id].desc, empty : current.menuGroups[menu.id].desc == ''}"></div>
+						</td>
+					</tr>
+				</table>
+
+				<h2>Menu Options</h2>
+				<table class="data">
+					<tr v-for="menu in def.menuOptions" v-bind:class="validateWholeScreenMessage(current.menuOptions, menu.id, 'text2')">
+						<td class="label"><div class="stringId">{{menu.id}}</div></td>
+						<td class="value">
+							<div v-bind:class="{hidden : false}">
+								<div class="label">Menu Name</div>
+								<div class="constraint">{{constraintWholeScreenMessage(current.menuOptions, menu.id, 'text2')}}</div>
+								<div class="ref">{{referent.menuOptions[menu.id].text2}}</div>
+								<div class="tran" v-if="isSmall(current.menuOptions[menu.id].text2)">
+									<input type="text" v-model="current.menuOptions[menu.id].text2[0]" v-bind:class="{unchanged : current.menuOptions[menu.id].text2[0] == referent.menuOptions[menu.id].text2[0] && current.menuOptions[menu.id].text2[1] == referent.menuOptions[menu.id].text2[1], empty : current.menuOptions[menu.id].text2[0] == '' && current.menuOptions[menu.id].text2[1] == ''}">
+									<input type="text" v-model="current.menuOptions[menu.id].text2[1]" v-bind:class="{unchanged : current.menuOptions[menu.id].text2[0] == referent.menuOptions[menu.id].text2[0] && current.menuOptions[menu.id].text2[1] == referent.menuOptions[menu.id].text2[1], empty : current.menuOptions[menu.id].text2[0] == '' && current.menuOptions[menu.id].text2[1] == ''}">
+									<button type="button" @click="convertToLarge(current.menuOptions, menu.id, 'text2')">Convert to large text</button>
+								</div>
+								<div class="tran" v-else>
+									<input type="text" v-model="current.menuOptions[menu.id].text2" v-bind:class="{unchanged : current.menuOptions[menu.id].text2 == referent.menuOptions[menu.id].text2, empty : current.menuOptions[menu.id].text2==''}">
+									<button type="button" @click="convertToSmall(current.menuOptions, menu.id, 'text2')">Convert to small text</button>
+								</div>
+							</div>
+							<div class="label">Description</div>
+							<div class="ref">{{referent.menuOptions[menu.id].desc}}</div>
+							<div class="tran"><input type="text" v-model="current.menuOptions[menu.id].desc" v-bind:class="{unchanged : current.menuOptions[menu.id].desc == referent.menuOptions[menu.id].desc, empty : current.menuOptions[menu.id].desc == ''}"></div>
+						</td>
+					</tr>
+				</table>
+
+				<div class="footer">
+					<input type="button" value="Save" onclick="save()">
+					<input type="button" value="View" onclick="view()">
+				</div>
+			</div>
+		</div>
+	</body>
+</html>

Translations/TranslationsParser.html

@@ -0,0 +1,322 @@
+<!DOCTYPE html>
+<html>
+
+	<head>
+		<meta charset="UTF-8">
+		<title>TS100 Translation Parser</title>
+
+		<script src="https://cdn.jsdelivr.net/npm/vue/dist/vue.js"></script>
+		<script src="translations_commons.js"></script>
+		<script src="translations_def.js"></script>
+		<script>
+
+	var app;
+	var defMap = {};
+	var langMap = {};
+	var lang;
+
+	var defMsgMap;
+	var defCharMap; 	
+	var defGrpMap;	
+	var defOptMap;	
+	
+	function save(langCode){
+		saveJSON(langMap[langCode], "translation_"+langCode.toLowerCase()+".json");
+	}
+
+	function view(langCode){
+		showJSON(langMap[langCode], "translation_"+langCode.toLowerCase()+".json");
+	}
+
+	function translationFileSelected(e) {
+		var target = e;
+		var id = target.id;
+		
+		var file = target.files[0];
+		if (!file) {
+			return;
+		}
+		var fr = new FileReader();
+		fr.onload = function(e) {
+			parseTranslationFile(file.name, e.target.result);
+		}
+		fr.readAsText(file);
+		
+	}
+	
+	function parseTranslationFile(name, src) {
+		// remove multiline comments
+		src = src.replace(/\/\*[\s\S.]*?\*\//mg, "");
+		// remove single-line comments
+		src = src.replace(/\/\/.*/mg, "");
+		// remove empty lines
+		src = src.replace(/^\s*\n/gm, "");
+		
+		var langCode = "";
+		var srcLines = src.split("\n");
+
+		var reMessage = /const\s+char\s*\*\s+([\w\d]+)\s*=\s*"(.*)"/;
+		var reSettingsDescStart = /const\s+char\s*\*\s+SettingsDescriptions\[/;
+		var reSettingsNamesStart = /const\s+char\s*\*\s+SettingsShortNames\[/;
+		var reSettingsMenuDescStart = /const\s+char\s*\*\s+SettingsMenuEntriesDescriptions\[/;
+		var reChar = /const\s+char\s+([\w\d]+)\s*=\s*'(\w)'/;
+		var reMenuMode = /SettingsShortNameType\s*=\s*SHORT_NAME_(\w+)_LINE/;
+		
+		var reMenuStart = /\s*const\s+char\s*\*\s+SettingsMenuEntries\[/;
+
+//		var reString = /^\s*"(.*)"/;
+		var reString = /"(.*)"/;
+		var reSingleLine = /{\s*"(.*)"\s*}/;
+		var reDoubleLine = /{\s*"(.*)"\s*,\s*"(.*)"\s*}/;
+		
+		var mode = '';
+		var entryIndex = 0;
+		for (var li = 0; li < srcLines.length; li++) {
+			// trim lines
+			line = srcLines[li] = srcLines[li].trim();
+			
+			// if entering a new lang block
+			if (startsWith(line, "#ifdef LANG_")) {
+				mode = 'new-language';
+				langCode = line.substring(12);
+				lang = langMap[langCode];
+				// use existing or instantiate new
+				if (!isDefined(lang)) {
+					lang = {
+						languageCode: langCode,
+						cyrillicGlyphs: false,
+						messages: {},
+						characters: {},
+						menuGroups: {},
+						menuOptions: {}
+					};
+					langMap[langCode] = lang;
+					app.languages[app.languages.length] = langCode;
+				}
+				entryIndex = 0;
+				continue;
+			}
+
+			// Use Cyrillic glyphs
+			if (startsWith(line, "#define CYRILLIC_GLYPHS")) {
+				lang.cyrillicGlyphs = true;
+				entryIndex = 0;
+				continue;
+			}
+
+			// Menu type
+			reMenuMode.lastIndex = 0;
+			match = reMenuMode.exec(line);
+			if (match) {
+				entryIndex = 0;
+				continue;
+			}
+			
+			// Messages
+			reMessage.lastIndex = 0;
+			match = reMessage.exec(line);
+			if (match) {
+				lang.messages[match[1]] = xunescape(match[2]);
+				entryIndex = 0;
+				continue;
+			}
+			
+			// Chars descriptions
+			reChar.lastIndex = 0;
+			match = reChar.exec(line);
+			if (match) {
+				// found description block start
+				mode = 'char';
+				lang.characters[match[1]] = xunescape(match[2]);
+				entryIndex = 0;
+				continue;
+			}
+			// Settings descriptions
+			reSettingsDescStart.lastIndex = 0;
+			match = reSettingsDescStart.exec(line);
+			if (match) {
+				// found description block start
+				mode = 'settingsDesc';
+				entryIndex = 0;
+				continue;
+			}
+			reSettingsNamesStart.lastIndex = 0;
+			match = reSettingsNamesStart.exec(line);
+			if (match) {
+				// found description block start
+				mode = 'settingsNames';
+				entryIndex = 0;
+				continue;
+			}
+			reMenuStart.lastIndex = 0;
+			match = reMenuStart.exec(line);
+			if (match) {
+				// found description block start
+				mode = 'menu';
+				entryIndex = 0;
+				continue;
+			}
+			reSettingsMenuDescStart.lastIndex = 0;
+			match = reSettingsMenuDescStart.exec(line);
+			if (match) {
+				// found description block start
+				mode = 'menuDesc';
+				entryIndex = 0;
+				continue;
+			}
+			
+			if (mode == 'menu') {
+				// processing menu group names
+				reString.lastIndex = 0;
+				match = reString.exec(line);
+				if (match) {
+					// found description string
+					var entry = getMenuGroup(entryIndex);
+					var m = match[1].split("\\n");
+					entry.text2[0] = xunescape(m[0]);
+					entry.text2[1] = xunescape(m[1]);
+					entryIndex++;
+				}
+			} else if (mode == 'menuDesc') {
+				// processing menu group descriptions
+				reString.lastIndex = 0;
+				match = reString.exec(line);
+				if (match) {
+					// found description string
+					var entry = getMenuGroup(entryIndex);
+					entry.desc = xunescape(match[1]);
+					entryIndex++;
+				}
+			} else if (mode == 'settingsDesc') {
+				// processing option descriptions
+				reString.lastIndex = 0;
+				match = reString.exec(line);
+				if (match) {
+					// found description string
+					var entry = getMenuOption(entryIndex);
+					entry.desc = xunescape(match[1]);
+					entryIndex++;
+				}
+			} else if (mode == 'settingsNames') {
+				reDoubleLine.lastIndex = 0;
+				match = reDoubleLine.exec(line);
+				if (match) {
+					var entry = getMenuOption(entryIndex);
+					entry.text2[0] = xunescape(match[1]);
+					entry.text2[1] = xunescape(match[2]);
+					entryIndex++;
+				} else {
+					reSingleLine.lastIndex = 0;
+					match = reSingleLine.exec(line);
+					if (match) {
+						var entry = getMenuOption(entryIndex);
+						entry.text = xunescape(match[1]);
+						entryIndex++;
+					}
+
+				}
+			}
+		}
+		app.done = 1;
+	}
+
+	function getMenuOption(entryIndex) {
+		var optionDef = def.menuOptions[entryIndex];
+		if (!isDefined(optionDef)) {
+			var s = "Could not find menu option with index "+entryIndex;
+			alert(s);
+			throw s;
+		}
+		var id = optionDef.id;
+		var entry = lang.menuOptions[id];
+		if (!isDefined(entry)) {
+			entry =
+			{
+				"text2": ["", ""],
+				"desc": ""
+			}
+			lang.menuOptions[id] = entry;
+		}
+		return entry;
+	}
+	
+	function getMenuGroup(entryIndex) {
+		var optionDef = def.menuGroups[entryIndex];
+		if (!isDefined(optionDef)) {
+			var s = "Could not find menu group with index "+entryIndex;
+			alert(s);
+			throw s;
+		}
+		var id = optionDef.id;
+		var entry = lang.menuGroups[id];
+		if (!isDefined(entry)) {
+			entry =
+			{
+				"text2": ["", ""],
+				"desc": ""
+			}
+			lang.menuGroups[id] = entry;
+		}
+		return entry;
+	}
+	
+	function markSaved(lang) {
+		document.getElementById("row_"+lang).classList.add("saved");
+	}
+	
+	function loaded() {
+		app = new Vue({
+			el : '#app',
+			data : {
+				languages: [],
+				done : false,
+				def : {
+				}
+				
+			},
+			methods : {
+				vSave : function(lang) {
+					save(lang);
+					markSaved(lang);
+				},
+				vView : function(lang) {
+					view(lang);
+					markSaved(lang);
+				}
+			}
+		});
+		
+		app.def = def;
+		defMsgMap = copyArrayToMap(app.def.messages);
+		defCharMap = copyArrayToMap(app.def.characters);
+		defGrpMap = copyArrayToMap(app.def.menuGroups);
+		defOptMap = copyArrayToMap(app.def.menuOptions);
+	}
+
+	window.onload=loaded;
+</script>
+	<link href="translations.css" rel="stylesheet" type="text/css">
+	</head>
+	<body>
+
+		<div id="app">
+			<h1>TS100 Translation Parser</h1>
+			<table class="header data">
+				<tr>
+					<td class="label">Translation.cpp</td>
+					<td class="value">
+						<input type="file" id="translation-cpp-file" onchange="translationFileSelected(this)" accept=".cpp">
+					</td>
+				</tr>
+			</table>
+			
+			<div class="data" v-if="done">
+				<div class="value" v-for="lang in languages" :id="'row_'+lang">
+					<input type="button" :value="'Save '+lang" v-on:click="vSave(lang)">
+					<input type="button" :value="'View '+lang" v-on:click="vView(lang)">
+				</div>
+			</div>
+				
+		</div>
+	</body>
+</html>

Translations/brieflz.py

@@ -0,0 +1,189 @@
+import ctypes
+import functools
+import os
+from pathlib import Path
+
+HERE = Path(__file__).resolve().parent
+
+
+@functools.lru_cache(maxsize=None)
+def _libbrieflz():
+    so_path = os.path.join(HERE, "../source/Objects/host/brieflz/libbrieflz.so")
+    libbrieflz = ctypes.cdll.LoadLibrary(so_path)
+    return libbrieflz
+
+
+@functools.lru_cache(maxsize=None)
+def _fn_blz_max_packed_size():
+    """Returns the blz_max_packed_size C function.
+    ::
+
+        /**
+        * Get bound on compressed data size.
+        *
+        * @see blz_pack
+        *
+        * @param src_size number of bytes to compress
+        * @return maximum size of compressed data
+        */
+        BLZ_API size_t
+        blz_max_packed_size(size_t src_size);
+    """
+
+    fn = _libbrieflz().blz_max_packed_size
+    fn.argtype = [
+        ctypes.c_size_t,
+    ]
+    fn.restype = ctypes.c_size_t
+    return fn
+
+
+def blz_max_packed_size(src_size: int) -> int:
+    """Get bound on compressed data size."""
+    fn_blz_max_packed_size = _fn_blz_max_packed_size()
+    return int(fn_blz_max_packed_size(src_size))
+
+
+@functools.lru_cache(maxsize=None)
+def _fn_blz_workmem_size_level():
+    """Returns the blz_workmem_size_level C function.
+    ::
+
+        /**
+        * Get required size of `workmem` buffer.
+        *
+        * @see blz_pack_level
+        *
+        * @param src_size number of bytes to compress
+        * @param level compression level
+        * @return required size in bytes of `workmem` buffer
+        */
+        BLZ_API size_t
+        blz_workmem_size_level(size_t src_size, int level);
+    """
+
+    fn = _libbrieflz().blz_workmem_size_level
+    fn.argtype = [
+        ctypes.c_size_t,
+        ctypes.c_int,
+    ]
+    fn.restype = ctypes.c_size_t
+    return fn
+
+
+def blz_workmem_size_level(src_size: int, level: int) -> int:
+    """Get required size of `workmem` buffer."""
+    fn_blz_workmem_size_level = _fn_blz_workmem_size_level()
+    return int(fn_blz_workmem_size_level(src_size, level))
+
+
+@functools.lru_cache(maxsize=None)
+def _fn_blz_pack_level():
+    """Returns the blz_pack_level C function.
+    ::
+
+        /**
+        * Compress `src_size` bytes of data from `src` to `dst`.
+        *
+        * Compression levels between 1 and 9 offer a trade-off between
+        * time/space and ratio. Level 10 is optimal but very slow.
+        *
+        * @param src pointer to data
+        * @param dst pointer to where to place compressed data
+        * @param src_size number of bytes to compress
+        * @param workmem pointer to memory for temporary use
+        * @param level compression level
+        * @return size of compressed data
+        */
+        BLZ_API unsigned long
+        blz_pack_level(const void *src, void *dst, unsigned long src_size,
+                       void *workmem, int level);
+    """
+
+    fn = _libbrieflz().blz_pack_level
+    fn.argtype = [
+        ctypes.c_char_p,
+        ctypes.c_char_p,
+        ctypes.c_ulong,
+        ctypes.c_char_p,
+        ctypes.c_int,
+    ]
+    fn.restype = ctypes.c_ulong
+    return fn
+
+
+def compress(data: bytes) -> bytes:
+    """Returns a bytes object of the brieflz-compressed data."""
+
+    fn_blz_pack_level = _fn_blz_pack_level()
+
+    output_buffer_len = blz_max_packed_size(len(data))
+
+    src = data
+    dst = ctypes.create_string_buffer(output_buffer_len)
+    src_size = len(src)
+    workmem = ctypes.create_string_buffer(blz_workmem_size_level(len(data), 10))
+    level = 10
+
+    res = fn_blz_pack_level(src, dst, src_size, workmem, level)
+
+    if res == 0:
+        raise BriefLZError()
+    else:
+        return bytes(dst[:res])  # type: ignore
+
+
+@functools.lru_cache(maxsize=None)
+def _fn_blz_depack_srcsize():
+    """Returns the blz_depack_srcsize C function.
+    ::
+
+        /**
+        * Decompress `src_size` bytes of data from `src` to `dst`.
+        *
+        * This function is unsafe. If the provided data is malformed, it may
+        * read more than `src_size` from the `src` buffer.
+        *
+        * @param src pointer to compressed data
+        * @param dst pointer to where to place decompressed data
+        * @param src_size size of the compressed data
+        * @return size of decompressed data
+        */
+        BLZ_API unsigned long
+        blz_depack_srcsize(const void *src, void *dst, unsigned long src_size);
+    """
+
+    fn = _libbrieflz().blz_depack_srcsize
+    fn.argtype = [
+        ctypes.c_char_p,
+        ctypes.c_char_p,
+        ctypes.c_ulong,
+    ]
+    fn.restype = ctypes.c_ulong
+    return fn
+
+
+def depack_srcsize(data: bytes, expected_depack_size: int) -> bytes:
+    """Returns a bytes object of the uncompressed data."""
+
+    fn_blz_depack_srcsize = _fn_blz_depack_srcsize()
+
+    output_buffer_len = expected_depack_size * 2
+
+    src = data
+    dst = ctypes.create_string_buffer(output_buffer_len)
+    src_size = len(src)
+
+    res = fn_blz_depack_srcsize(src, dst, src_size)
+
+    if res == 0:
+        raise BriefLZError()
+    else:
+        return bytes(dst[:res])  # type: ignore
+
+
+class BriefLZError(Exception):
+    """Exception raised for brieflz compression or decompression error."""
+
+    def __init__(self):
+        pass

Translations/brieflz_test.py

@@ -0,0 +1,24 @@
+#!/usr/bin/env python3
+import brieflz
+import unittest
+
+
+TEST_DATA = (
+    b"Lorem ipsum dolor sit amet, consectetur adipiscing elit. "
+    b"Ut consequat mattis orci ac laoreet. Duis ac turpis tempus, varius lacus non, dignissim lectus. "
+    b"Curabitur quis metus luctus, sollicitudin ipsum at, dictum metus. "
+    b"Cras sed est nec ex tempor tincidunt in at ante. Vivamus laoreet urna eget lectus euismod feugiat. "
+    b"Duis a massa ac metus pellentesque interdum. Nunc congue, est faucibus convallis commodo, justo nibh sagittis augue, sed tristique urna neque vitae urna. "
+    b"Donec quis orci et purus imperdiet sollicitudin."
+)
+
+
+class TestBriefLZ(unittest.TestCase):
+    def test_roundtrip(self):
+        packed = brieflz.compress(TEST_DATA)
+        depacked = brieflz.depack_srcsize(packed, len(TEST_DATA))
+        self.assertEqual(depacked, TEST_DATA)
+
+
+if __name__ == "__main__":
+    unittest.main()

Translations/font_tables.py

@@ -0,0 +1,874 @@
+from typing import Dict, Final, Tuple
+
+
+def get_font_map_ascii_basic() -> Dict[str, bytes]:
+    font = {
+        # U+0000..U+007F Basic Latin
+        " ": b"\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00",
+        "!": b"\x00\x00\x00\x00\x7C\xFF\xFF\x7C\x00\x00\x00\x00\x00\x00\x00\x00\x00\x33\x33\x00\x00\x00\x00\x00",
+        '"': b"\x00\x00\x00\x3C\x3C\x00\x00\x3C\x3C\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00",
+        "#": b"\x00\x00\x10\x90\xF0\x7E\x1E\x90\xF0\x7E\x1E\x10\x00\x02\x1E\x1F\x03\x02\x1E\x1F\x03\x02\x00\x00",
+        "$": b"\x00\x00\x78\xFC\xCC\xFF\xFF\xCC\xCC\x88\x00\x00\x00\x00\x04\x0C\x0C\x3F\x3F\x0C\x0F\x07\x00\x00",
+        "%": b"\x00\x00\x38\x38\x38\x00\x80\xC0\xE0\x70\x38\x1C\x00\x30\x38\x1C\x0E\x07\x03\x01\x38\x38\x38\x00",
+        "&": b"\x00\x00\x00\xB8\xFC\xC6\xE2\x3E\x1C\x00\x00\x00\x00\x00\x1F\x3F\x31\x21\x37\x1E\x1C\x36\x22\x00",
+        "'": b"\x00\x00\x00\x00\x27\x3F\x1F\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00",
+        "(": b"\x00\x00\x00\xF0\xFC\xFE\x07\x01\x01\x00\x00\x00\x00\x00\x00\x03\x0F\x1F\x38\x20\x20\x00\x00\x00",
+        ")": b"\x00\x00\x00\x01\x01\x07\xFE\xFC\xF0\x00\x00\x00\x00\x00\x00\x20\x20\x38\x1F\x0F\x03\x00\x00\x00",
+        "*": b"\x00\x00\x98\xB8\xE0\xF8\xF8\xE0\xB8\x98\x00\x00\x00\x00\x0C\x0E\x03\x0F\x0F\x03\x0E\x0C\x00\x00",
+        "+": b"\x00\x00\x80\x80\x80\xF0\xF0\x80\x80\x80\x00\x00\x00\x00\x01\x01\x01\x0F\x0F\x01\x01\x01\x00\x00",
+        ",": b"\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\xB8\xF8\x78\x00\x00\x00\x00\x00",
+        "-": b"\x00\x00\x80\x80\x80\x80\x80\x80\x80\x80\x00\x00\x00\x00\x01\x01\x01\x01\x01\x01\x01\x01\x00\x00",
+        ".": b"\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x38\x38\x38\x00\x00\x00\x00\x00",
+        "/": b"\x00\x00\x00\x00\x00\x80\xC0\xE0\x70\x38\x1C\x0E\x00\x18\x1C\x0E\x07\x03\x01\x00\x00\x00\x00\x00",
+        "0": b"\x00\xF8\xFE\x06\x03\x83\xC3\x63\x33\x1E\xFE\xF8\x00\x07\x1F\x1E\x33\x31\x30\x30\x30\x18\x1F\x07",
+        "1": b"\x00\x00\x00\x0C\x0C\x0E\xFF\xFF\x00\x00\x00\x00\x00\x00\x00\x30\x30\x30\x3F\x3F\x30\x30\x30\x00",
+        "2": b"\x00\x1C\x1E\x07\x03\x03\x83\xC3\xE3\x77\x3E\x1C\x00\x30\x38\x3C\x3E\x37\x33\x31\x30\x30\x30\x30",
+        "3": b"\x00\x0C\x0E\x07\xC3\xC3\xC3\xC3\xC3\xE7\x7E\x3C\x00\x0C\x1C\x38\x30\x30\x30\x30\x30\x39\x1F\x0E",
+        "4": b"\x00\xC0\xE0\x70\x38\x1C\x0E\x07\xFF\xFF\x00\x00\x00\x03\x03\x03\x03\x03\x03\x03\x3F\x3F\x03\x03",
+        "5": b"\x00\x3F\x7F\x63\x63\x63\x63\x63\x63\xE3\xC3\x83\x00\x0C\x1C\x38\x30\x30\x30\x30\x30\x38\x1F\x0F",
+        "6": b"\x00\xC0\xF0\xF8\xDC\xCE\xC7\xC3\xC3\xC3\x80\x00\x00\x0F\x1F\x39\x30\x30\x30\x30\x30\x39\x1F\x0F",
+        "7": b"\x00\x03\x03\x03\x03\x03\x03\xC3\xF3\x3F\x0F\x03\x00\x00\x00\x00\x30\x3C\x0F\x03\x00\x00\x00\x00",
+        "8": b"\x00\x00\xBC\xFE\xE7\xC3\xC3\xC3\xE7\xFE\xBC\x00\x00\x0F\x1F\x39\x30\x30\x30\x30\x30\x39\x1F\x0F",
+        "9": b"\x00\x3C\x7E\xE7\xC3\xC3\xC3\xC3\xC3\xE7\xFE\xFC\x00\x00\x00\x30\x30\x30\x38\x1C\x0E\x07\x03\x00",
+        ":": b"\x00\x00\x00\x00\x70\x70\x70\x00\x00\x00\x00\x00\x00\x00\x00\x00\x1C\x1C\x1C\x00\x00\x00\x00\x00",
+        ";": b"\x00\x00\x00\x00\x70\x70\x70\x00\x00\x00\x00\x00\x00\x00\x00\x00\x9C\xFC\x7C\x00\x00\x00\x00\x00",
+        "<": b"\x00\x00\xC0\xE0\xF0\x38\x1C\x0E\x07\x03\x00\x00\x00\x00\x00\x01\x03\x07\x0E\x1C\x38\x30\x00\x00",
+        "=": b"\x00\x00\x60\x60\x60\x60\x60\x60\x60\x60\x60\x00\x00\x00\x06\x06\x06\x06\x06\x06\x06\x06\x06\x00",
+        ">": b"\x00\x00\x03\x07\x0E\x1C\x38\xF0\xE0\xC0\x00\x00\x00\x00\x30\x38\x1C\x0E\x07\x03\x01\x00\x00\x00",
+        "?": b"\x00\x1C\x1E\x07\x03\x83\xC3\xE3\x77\x3E\x1C\x00\x00\x00\x00\x00\x00\x37\x37\x00\x00\x00\x00\x00",
+        "@": b"\x00\xF8\xFE\x07\xF3\xFB\x1B\xFB\xFB\x07\xFE\xF8\x00\x0F\x1F\x18\x33\x37\x36\x37\x37\x36\x03\x01",
+        "A": b"\x00\x00\x00\xE0\xFC\x1F\x1F\xFC\xE0\x00\x00\x00\x00\x38\x3F\x07\x06\x06\x06\x06\x07\x3F\x38\x00",
+        "B": b"\x00\xFF\xFF\xC3\xC3\xC3\xC3\xE7\xFE\xBC\x00\x00\x00\x3F\x3F\x30\x30\x30\x30\x30\x39\x1F\x0F\x00",
+        "C": b"\x00\xF0\xFC\x0E\x07\x03\x03\x03\x07\x0E\x0C\x00\x00\x03\x0F\x1C\x38\x30\x30\x30\x38\x1C\x0C\x00",
+        "D": b"\x00\xFF\xFF\x03\x03\x03\x03\x07\x0E\xFC\xF0\x00\x00\x3F\x3F\x30\x30\x30\x30\x38\x1C\x0F\x03\x00",
+        "E": b"\x00\xFF\xFF\xC3\xC3\xC3\xC3\xC3\xC3\x03\x03\x00\x00\x3F\x3F\x30\x30\x30\x30\x30\x30\x30\x30\x00",
+        "F": b"\x00\xFF\xFF\xC3\xC3\xC3\xC3\xC3\xC3\x03\x03\x00\x00\x3F\x3F\x00\x00\x00\x00\x00\x00\x00\x00\x00",
+        "G": b"\x00\xF0\xFC\x0E\x07\x03\xC3\xC3\xC3\xC7\xC6\x00\x00\x03\x0F\x1C\x38\x30\x30\x30\x30\x3F\x3F\x00",
+        "H": b"\x00\xFF\xFF\xC0\xC0\xC0\xC0\xC0\xC0\xFF\xFF\x00\x00\x3F\x3F\x00\x00\x00\x00\x00\x00\x3F\x3F\x00",
+        "I": b"\x00\x00\x00\x03\x03\xFF\xFF\x03\x03\x00\x00\x00\x00\x00\x00\x30\x30\x3F\x3F\x30\x30\x00\x00\x00",
+        "J": b"\x00\x00\x00\x00\x00\x00\x00\x00\x00\xFF\xFF\x00\x00\x0E\x1E\x38\x30\x30\x30\x30\x38\x1F\x07\x00",
+        "K": b"\x00\xFF\xFF\xC0\xE0\xF0\x38\x1C\x0E\x07\x03\x00\x00\x3F\x3F\x00\x01\x03\x07\x0E\x1C\x38\x30\x00",
+        "L": b"\x00\xFF\xFF\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x3F\x3F\x30\x30\x30\x30\x30\x30\x30\x30\x00",
+        "M": b"\x00\xFF\xFF\x1E\x78\xE0\xE0\x78\x1E\xFF\xFF\x00\x00\x3F\x3F\x00\x00\x01\x01\x00\x00\x3F\x3F\x00",
+        "N": b"\x00\xFF\xFF\x0E\x38\xF0\xC0\x00\x00\xFF\xFF\x00\x00\x3F\x3F\x00\x00\x00\x03\x07\x1C\x3F\x3F\x00",
+        "O": b"\x00\xF0\xFC\x0E\x07\x03\x03\x07\x0E\xFC\xF0\x00\x00\x03\x0F\x1C\x38\x30\x30\x38\x1C\x0F\x03\x00",
+        "P": b"\x00\xFF\xFF\x83\x83\x83\x83\x83\xC7\xFE\x7C\x00\x00\x3F\x3F\x01\x01\x01\x01\x01\x01\x00\x00\x00",
+        "Q": b"\x00\xF0\xFC\x0E\x07\x03\x03\x07\x0E\xFC\xF0\x00\x00\x03\x0F\x1C\x38\x30\x36\x3E\x1C\x3F\x33\x00",
+        "R": b"\x00\xFF\xFF\x83\x83\x83\x83\x83\xC7\xFE\x7C\x00\x00\x3F\x3F\x01\x01\x03\x07\x0F\x1D\x38\x30\x00",
+        "S": b"\x00\x3C\x7E\xE7\xC3\xC3\xC3\xC3\xC7\x8E\x0C\x00\x00\x0C\x1C\x38\x30\x30\x30\x30\x39\x1F\x0F\x00",
+        "T": b"\x00\x00\x03\x03\x03\xFF\xFF\x03\x03\x03\x00\x00\x00\x00\x00\x00\x00\x3F\x3F\x00\x00\x00\x00\x00",
+        "U": b"\x00\xFF\xFF\x00\x00\x00\x00\x00\x00\xFF\xFF\x00\x00\x07\x1F\x38\x30\x30\x30\x30\x38\x1F\x07\x00",
+        "V": b"\x00\x07\x3F\xF8\xC0\x00\x00\xC0\xF8\x3F\x07\x00\x00\x00\x00\x01\x0F\x3E\x3E\x0F\x01\x00\x00\x00",
+        "W": b"\x00\xFF\xFF\x00\x00\x80\x80\x00\x00\xFF\xFF\x00\x00\x3F\x3F\x1C\x06\x03\x03\x06\x1C\x3F\x3F\x00",
+        "X": b"\x00\x03\x0F\x1C\x30\xE0\xE0\x30\x1C\x0F\x03\x00\x00\x30\x3C\x0E\x03\x01\x01\x03\x0E\x3C\x30\x00",
+        "Y": b"\x00\x03\x0F\x3C\xF0\xC0\xC0\xF0\x3C\x0F\x03\x00\x00\x00\x00\x00\x00\x3F\x3F\x00\x00\x00\x00\x00",
+        "Z": b"\x00\x03\x03\x03\x03\xC3\xE3\x33\x1F\x0F\x03\x00\x00\x30\x3C\x3E\x33\x31\x30\x30\x30\x30\x30\x00",
+        "[": b"\x00\x00\x00\xFF\xFF\x03\x03\x03\x03\x00\x00\x00\x00\x00\x00\x3F\x3F\x30\x30\x30\x30\x00\x00\x00",
+        "\\": b"\x00\x0E\x1C\x38\x70\xE0\xC0\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x01\x03\x07\x0E\x1C\x18",
+        "]": b"\x00\x00\x00\x03\x03\x03\x03\xFF\xFF\x00\x00\x00\x00\x00\x00\x30\x30\x30\x30\x3F\x3F\x00\x00\x00",
+        "^": b"\x00\x60\x70\x38\x1C\x0E\x07\x0E\x1C\x38\x70\x60\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00",
+        "_": b"\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\xC0\xC0\xC0\xC0\xC0\xC0\xC0\xC0\xC0\xC0\xC0",
+        "`": b"\x00\x00\x00\x00\x00\x3E\x7E\x4E\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00",
+        "a": b"\x00\x00\x40\x60\x60\x60\x60\x60\x60\xE0\xC0\x00\x00\x1C\x3E\x33\x33\x33\x33\x33\x33\x3F\x3F\x00",
+        "b": b"\x00\xFF\xFF\xC0\x60\x60\x60\x60\xE0\xC0\x80\x00\x00\x3F\x3F\x30\x30\x30\x30\x30\x38\x1F\x0F\x00",
+        "c": b"\x00\x80\xC0\xE0\x60\x60\x60\x60\x60\xC0\x80\x00\x00\x0F\x1F\x38\x30\x30\x30\x30\x30\x18\x08\x00",
+        "d": b"\x00\x80\xC0\xE0\x60\x60\x60\xE0\xC0\xFF\xFF\x00\x00\x0F\x1F\x38\x30\x30\x30\x30\x30\x3F\x3F\x00",
+        "e": b"\x00\x80\xC0\xE0\x60\x60\x60\x60\x60\xC0\x80\x00\x00\x0F\x1F\x3B\x33\x33\x33\x33\x33\x13\x01\x00",
+        "f": b"\x00\xC0\xC0\xFC\xFE\xC7\xC3\xC3\x03\x00\x00\x00\x00\x00\x00\x3F\x3F\x00\x00\x00\x00\x00\x00\x00",
+        "g": b"\x00\x80\xC0\xE0\x60\x60\x60\x60\x60\xE0\xE0\x00\x00\x03\xC7\xCE\xCC\xCC\xCC\xCC\xE6\x7F\x3F\x00",
+        "h": b"\x00\xFF\xFF\xC0\x60\x60\x60\xE0\xC0\x80\x00\x00\x00\x3F\x3F\x00\x00\x00\x00\x00\x3F\x3F\x00\x00",
+        "i": b"\x00\x00\x00\x00\x60\xEC\xEC\x00\x00\x00\x00\x00\x00\x00\x00\x30\x30\x3F\x3F\x30\x30\x00\x00\x00",
+        "j": b"\x00\x00\x00\x00\x00\x00\x60\xEC\xEC\x00\x00\x00\x00\x00\x00\x60\xE0\xC0\xC0\xFF\x7F\x00\x00\x00",
+        "k": b"\x00\x00\xFF\xFF\x00\x80\xC0\xE0\x60\x00\x00\x00\x00\x00\x3F\x3F\x03\x07\x0F\x1C\x38\x30\x00\x00",
+        "l": b"\x00\x00\x00\x00\x03\xFF\xFF\x00\x00\x00\x00\x00\x00\x00\x00\x30\x30\x3F\x3F\x30\x30\x00\x00\x00",
+        "m": b"\x00\xE0\xC0\xE0\xE0\xC0\xC0\xE0\xE0\xC0\x80\x00\x00\x3F\x3F\x00\x00\x3F\x3F\x00\x00\x3F\x3F\x00",
+        "n": b"\x00\x00\xE0\xE0\x60\x60\x60\x60\xE0\xC0\x80\x00\x00\x00\x3F\x3F\x00\x00\x00\x00\x00\x3F\x3F\x00",
+        "o": b"\x00\x80\xC0\xE0\x60\x60\x60\x60\xE0\xC0\x80\x00\x00\x0F\x1F\x38\x30\x30\x30\x30\x38\x1F\x0F\x00",
+        "p": b"\x00\xE0\xE0\x60\x60\x60\x60\x60\xE0\xC0\x80\x00\x00\xFF\xFF\x0C\x18\x18\x18\x18\x1C\x0F\x07\x00",
+        "q": b"\x00\x80\xC0\xE0\x60\x60\x60\x60\x60\xE0\xE0\x00\x00\x07\x0F\x1C\x18\x18\x18\x18\x0C\xFF\xFF\x00",
+        "r": b"\x00\x00\xE0\xE0\xC0\x60\x60\x60\x60\xE0\xC0\x00\x00\x00\x3F\x3F\x00\x00\x00\x00\x00\x00\x00\x00",
+        "s": b"\x00\xC0\xE0\x60\x60\x60\x60\x60\x40\x00\x00\x00\x00\x11\x33\x33\x33\x33\x33\x3F\x1E\x00\x00\x00",
+        "t": b"\x00\x60\x60\xFE\xFE\x60\x60\x60\x00\x00\x00\x00\x00\x00\x00\x1F\x3F\x30\x30\x30\x30\x00\x00\x00",
+        "u": b"\x00\xE0\xE0\x00\x00\x00\x00\x00\x00\xE0\xE0\x00\x00\x0F\x1F\x38\x30\x30\x30\x30\x18\x3F\x3F\x00",
+        "v": b"\x00\x60\xE0\x80\x00\x00\x00\x00\x80\xE0\x60\x00\x00\x00\x01\x07\x1E\x38\x38\x1E\x07\x01\x00\x00",
+        "w": b"\x00\xE0\xE0\x00\x00\xE0\xE0\x00\x00\xE0\xE0\x00\x00\x07\x1F\x38\x1C\x0F\x0F\x1C\x38\x1F\x07\x00",
+        "x": b"\x00\x60\xE0\xC0\x80\x00\x80\xC0\xE0\x60\x00\x00\x00\x30\x38\x1D\x0F\x07\x0F\x1D\x38\x30\x00\x00",
+        "y": b"\x00\x00\x60\xE0\x80\x00\x00\x80\xE0\x60\x00\x00\x00\x00\x00\x81\xE7\x7E\x1E\x07\x01\x00\x00\x00",
+        "z": b"\x00\x60\x60\x60\x60\x60\xE0\xE0\x60\x20\x00\x00\x00\x30\x38\x3C\x36\x33\x31\x30\x30\x30\x00\x00",
+        "{": b"\x00\x00\x80\xC0\xFC\x7E\x07\x03\x03\x03\x00\x00\x00\x00\x00\x01\x1F\x3F\x70\x60\x60\x60\x00\x00",
+        "|": b"\x00\x00\x00\x00\x00\xFF\xFF\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x3F\x3F\x00\x00\x00\x00\x00",
+        "}": b"\x00\x00\x03\x03\x03\x07\x7E\xFC\xC0\x80\x00\x00\x00\x00\x60\x60\x60\x70\x3F\x1F\x01\x00\x00\x00",
+        "~": b"\x00\x10\x18\x0C\x04\x0C\x18\x10\x18\x0C\x04\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00",
+    }
+    return font
+
+
+def get_font_map_latin_extended() -> Dict[str, bytes]:
+    font = {
+        # U+0080..U+00FF Latin-1 Supplement
+        "¡": b"\x00\x00\x00\x00\x80\xF3\xF3\x80\x00\x00\x00\x00\x00\x00\x00\x00\x0F\x3F\x3F\x0F\x00\x00\x00\x00",
+        "¢": b"\x00\x00\xE0\xF0\x38\xFE\xFE\x18\x38\x30\x00\x00\x00\x00\x03\x07\x0E\x3F\x3F\x0C\x0E\x06\x00\x00",
+        "£": b"\x00\x00\x00\x80\xF8\xFC\x8C\x8C\x1C\x18\x00\x00\x00\x00\x18\x1C\x1F\x0B\x18\x18\x18\x18\x08\x00",
+        "¤": b"\x00\xF6\xFE\x18\x0C\x0C\x0C\x0C\x18\xFE\xF6\x00\x00\x1B\x1F\x06\x0C\x0C\x0C\x0C\x06\x1F\x1B\x00",
+        "¥": b"\x00\x03\x0F\x3C\xF0\xC0\xC0\xF0\x3C\x0F\x03\x00\x00\x00\x0A\x0A\x0A\x3F\x3F\x0A\x0A\x0A\x00\x00",
+        "¦": b"\x00\x00\x00\x00\x00\x1F\x1F\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x3F\x3F\x00\x00\x00\x00\x00",
+        "§": b"\x00\x00\xDC\xFE\x22\x22\x22\x22\xE6\xC4\x00\x00\x00\x00\x08\x19\x11\x11\x11\x11\x1F\x0E\x00\x00",
+        "¨": b"\x00\x00\x00\x03\x03\x00\x00\x03\x03\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00",
+        "©": b"\x00\xF0\xF8\x1C\xCC\xEC\x2C\x6C\x4C\x1C\xF8\xF0\x00\x07\x0F\x1C\x19\x1B\x1A\x1B\x19\x1C\x0F\x07",
+        "«": b"\x00\x80\xC0\x60\x20\x00\x80\xC0\x60\x20\x00\x00\x00\x00\x01\x03\x02\x00\x00\x01\x03\x02\x00\x00",
+        "¬": b"\x18\x18\x18\x18\x18\x18\x18\x18\x18\xF8\xF8\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x03\x03\x00",
+        "®": b"\x00\xF0\xF8\x1C\xEC\xEC\xAC\xEC\x4C\x1C\xF8\xF0\x00\x07\x0F\x1C\x1B\x1B\x18\x1B\x1B\x1C\x0F\x07",
+        "¯": b"\x00\x00\x00\x00\x00\x0C\x0C\x0C\x0C\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00",
+        "°": b"\x00\x00\x00\x1E\x3F\x33\x33\x3F\x1E\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00",
+        "±": b"\x00\x00\x00\xC0\xC0\xF0\xF0\xC0\xC0\x00\x00\x00\x00\x00\x00\x18\x18\x1B\x1B\x18\x18\x00\x00\x00",
+        "²": b"\x00\x00\x19\x1D\x15\x17\x12\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00",
+        "³": b"\x00\x00\x11\x15\x15\x1F\x0A\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00",
+        "´": b"\x00\x00\x00\x00\x04\x06\x03\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00",
+        "µ": b"\x00\xF0\xF0\x00\x00\x00\x00\x00\xF0\xF0\x00\x00\x00\xFF\xFF\x0E\x0C\x0C\x0C\x06\x0F\x0F\x00\x00",
+        "¶": b"\x00\x38\x7C\xC6\x82\xFE\xFE\x02\xFE\xFE\x02\x00\x00\x00\x00\x00\x00\x3F\x3F\x00\x3F\x3F\x00\x00",
+        "¹": b"\x00\x00\x12\x1F\x1F\x10\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00",
+        "»": b"\x00\x20\x60\xC0\x80\x00\x20\x60\xC0\x80\x00\x00\x00\x02\x03\x01\x00\x00\x02\x03\x01\x00\x00\x00",
+        "¼": b"\x00\x48\x7C\x7C\x40\x80\xC0\x60\x30\x10\x00\x00\x00\x00\x04\x06\x03\x01\x06\x07\x04\x1F\x1F\x00",
+        "½": b"\x00\x48\x7C\x7C\x40\x80\xC0\x60\x30\x10\x00\x00\x00\x00\x04\x06\x03\x01\x00\x19\x1D\x17\x12\x00",
+        "¾": b"\x00\x44\x54\x7C\x28\x80\xC0\x60\x30\x10\x00\x00\x00\x00\x04\x06\x03\x01\x06\x07\x04\x1F\x1F\x00",
+        "¿": b"\x00\x00\x00\x80\xC0\xFB\x7B\x00\x00\x00\x00\x00\x00\x0E\x1F\x3B\x31\x30\x30\x30\x38\x1E\x0E\x00",
+        "À": b"\x00\x00\x00\x80\xE1\x7B\x7E\xE4\x80\x00\x00\x00\x00\x38\x3E\x0F\x0D\x0C\x0C\x0D\x0F\x3E\x38\x00",
+        "Á": b"\x00\x00\x00\x80\xE4\x7E\x7B\xE1\x80\x00\x00\x00\x00\x38\x3E\x0F\x0D\x0C\x0C\x0D\x0F\x3E\x38\x00",
+        "Â": b"\x00\x00\x00\x84\xE6\x7B\x7B\xE6\x84\x00\x00\x00\x00\x38\x3E\x0F\x0D\x0C\x0C\x0D\x0F\x3E\x38\x00",
+        "Ã": b"\x00\x00\x00\x82\xE3\x79\x7B\xE2\x83\x01\x00\x00\x00\x38\x3E\x0F\x0D\x0C\x0C\x0D\x0F\x3E\x38\x00",
+        "Ä": b"\x00\x00\x00\x83\xE3\x78\x78\xE3\x83\x00\x00\x00\x00\x38\x3E\x0F\x0D\x0C\x0C\x0D\x0F\x3E\x38\x00",
+        "Å": b"\x00\x00\x00\x80\xE2\x75\x75\xE2\x80\x00\x00\x00\x00\x38\x3E\x0F\x0D\x0C\x0C\x0D\x0F\x3E\x38\x00",
+        "Æ": b"\x00\x00\x80\xF0\x7C\x1F\xFF\xFF\xC3\xC3\x03\x00\x00\x3C\x3F\x07\x06\x06\x3F\x3F\x30\x30\x30\x00",
+        "Ç": b"\x00\xF0\xFC\x0E\x07\x03\x03\x03\x07\x1E\x1C\x00\x00\x01\x07\xCE\xDC\xF8\xF8\x18\x1C\x0E\x06\x00",
+        "È": b"\x00\xF8\xF8\x99\x9B\x9E\x9C\x98\x98\x18\x18\x00\x00\x3F\x3F\x31\x31\x31\x31\x31\x31\x30\x30\x00",
+        "É": b"\x00\xF8\xF8\x98\x98\x9C\x9E\x9B\x99\x18\x18\x00\x00\x3F\x3F\x31\x31\x31\x31\x31\x31\x30\x30\x00",
+        "Ê": b"\x00\xF8\xF8\x9C\x9E\x9B\x9B\x9E\x9C\x18\x18\x00\x00\x3F\x3F\x31\x31\x31\x31\x31\x31\x30\x30\x00",
+        "Ë": b"\x00\xF8\xF8\x9B\x9B\x98\x98\x9B\x9B\x18\x18\x00\x00\x3F\x3F\x31\x31\x31\x31\x31\x31\x30\x30\x00",
+        "Ì": b"\x00\x00\x00\x19\x1B\xFE\xFC\x18\x18\x00\x00\x00\x00\x00\x00\x30\x30\x3F\x3F\x30\x30\x00\x00\x00",
+        "Í": b"\x00\x00\x00\x18\x18\xFC\xFE\x1B\x19\x00\x00\x00\x00\x00\x00\x30\x30\x3F\x3F\x30\x30\x00\x00\x00",
+        "Î": b"\x00\x00\x00\x1C\x1E\xFB\xFB\x1E\x1C\x00\x00\x00\x00\x00\x00\x30\x30\x3F\x3F\x30\x30\x00\x00\x00",
+        "Ï": b"\x00\x00\x00\x1B\x1B\xF8\xF8\x1B\x1B\x00\x00\x00\x00\x00\x00\x30\x30\x3F\x3F\x30\x30\x00\x00\x00",
+        "Ð": b"\x00\xC0\xFF\xFF\xC3\x03\x03\x07\x0E\xFC\xF0\x00\x00\x00\x3F\x3F\x30\x30\x30\x38\x1C\x0F\x03\x00",
+        "Ñ": b"\x00\xF8\xF8\x72\xE3\xC1\x83\x02\x03\xF9\xF8\x00\x00\x3F\x3F\x00\x00\x01\x03\x07\x0E\x3F\x3F\x00",
+        "Ò": b"\x00\xE0\xF0\x39\x1B\x1E\x1C\x18\x38\xF0\xE0\x00\x00\x0F\x1F\x38\x30\x30\x30\x30\x38\x1F\x0F\x00",
+        "Ó": b"\x00\xE0\xF0\x38\x18\x1C\x1E\x1B\x39\xF0\xE0\x00\x00\x0F\x1F\x38\x30\x30\x30\x30\x38\x1F\x0F\x00",
+        "Ô": b"\x00\xE0\xF0\x3C\x1E\x1B\x1B\x1E\x3C\xF0\xE0\x00\x00\x0F\x1F\x38\x30\x30\x30\x30\x38\x1F\x0F\x00",
+        "Õ": b"\x00\xE0\xF0\x3A\x1B\x19\x1B\x1A\x3B\xF1\xE0\x00\x00\x0F\x1F\x38\x30\x30\x30\x30\x38\x1F\x0F\x00",
+        "Ö": b"\x00\xE0\xF0\x3B\x1B\x18\x18\x1B\x3B\xF0\xE0\x00\x00\x0F\x1F\x38\x30\x30\x30\x30\x38\x1F\x0F\x00",
+        "×": b"\x00\xF0\xF8\x1C\x0C\x8C\xEC\x7C\x18\xFC\xF4\x00\x00\x2F\x3F\x18\x3E\x37\x31\x30\x38\x1F\x0F\x00",
+        "Ù": b"\x00\xF8\xF8\x01\x03\x06\x04\x00\x00\xF8\xF8\x00\x00\x07\x1F\x38\x30\x30\x30\x30\x38\x1F\x07\x00",
+        "Ú": b"\x00\xF8\xF8\x00\x00\x04\x06\x03\x01\xF8\xF8\x00\x00\x07\x1F\x38\x30\x30\x30\x30\x38\x1F\x07\x00",
+        "Û": b"\x00\xF8\xF8\x04\x06\x03\x03\x06\x04\xF8\xF8\x00\x00\x07\x1F\x38\x30\x30\x30\x30\x38\x1F\x07\x00",
+        "Ü": b"\x00\xF8\xF8\x03\x03\x00\x00\x03\x03\xF8\xF8\x00\x00\x07\x1F\x38\x30\x30\x30\x30\x38\x1F\x07\x00",
+        "Ý": b"\x00\x08\x18\x30\x60\xC4\xC6\x63\x31\x18\x08\x00\x00\x00\x00\x00\x00\x3F\x3F\x00\x00\x00\x00\x00",
+        "ß": b"\x00\x00\xC0\xE0\x30\x10\x10\x30\xE0\xC0\x00\x00\x00\x00\xFF\xFF\x21\x21\x21\x33\x3F\x1E\x00\x00",
+        "à": b"\x00\x00\x40\x60\x62\x66\x6C\x68\x60\xE0\xC0\x00\x00\x1C\x3E\x33\x33\x33\x33\x33\x33\x3F\x3F\x00",
+        "á": b"\x00\x00\x40\x60\x68\x6C\x66\x62\x60\xE0\xC0\x00\x00\x1C\x3E\x33\x33\x33\x33\x33\x33\x3F\x3F\x00",
+        "â": b"\x00\x00\x40\x68\x6C\x66\x66\x6C\x68\xE0\xC0\x00\x00\x1C\x3E\x33\x33\x33\x33\x33\x33\x3F\x3F\x00",
+        "ã": b"\x00\x00\x40\x68\x6C\x64\x6C\x68\x6C\xE4\xC0\x00\x00\x1C\x3E\x33\x33\x33\x33\x33\x33\x3F\x3F\x00",
+        "ä": b"\x00\x00\x40\x6C\x6C\x60\x60\x6C\x6C\xE0\xC0\x00\x00\x1C\x3E\x33\x33\x33\x33\x33\x33\x3F\x3F\x00",
+        "å": b"\x00\x00\x40\x60\x64\x6A\x6A\x64\x60\xE0\xC0\x00\x00\x1C\x3E\x33\x33\x33\x33\x33\x33\x3F\x3F\x00",
+        "æ": b"\x00\x80\xC0\x40\x40\xC0\x80\x40\x40\xC0\x80\x00\x00\x1C\x3E\x22\x22\x1F\x3F\x22\x22\x33\x11\x00",
+        "ç": b"\x00\x80\xC0\xE0\x60\x60\x60\x60\xE0\xC0\x80\x00\x00\x0F\x1F\xB8\xB0\xF0\xF0\x30\x38\x18\x08\x00",
+        "è": b"\x00\x80\xC0\xE0\x62\x66\x6C\x68\x60\xC0\x80\x00\x00\x0F\x1F\x33\x33\x33\x33\x33\x33\x13\x03\x00",
+        "é": b"\x00\x80\xC0\xE0\x60\x68\x6C\x66\x62\xC0\x80\x00\x00\x0F\x1F\x3B\x33\x33\x33\x33\x33\x13\x03\x00",
+        "ê": b"\x00\x80\xC0\xE8\x6C\x66\x66\x6C\x68\xC0\x80\x00\x00\x0F\x1F\x33\x33\x33\x33\x33\x33\x13\x03\x00",
+        "ë": b"\x00\x80\xC0\xEC\x6C\x60\x60\x6C\x6C\xC0\x80\x00\x00\x0F\x1F\x33\x33\x33\x33\x33\x33\x13\x03\x00",
+        "ì": b"\x00\x00\x00\x00\x62\xE6\xEC\x08\x00\x00\x00\x00\x00\x00\x00\x30\x30\x3F\x3F\x30\x30\x00\x00\x00",
+        "í": b"\x00\x00\x00\x00\x68\xEC\xE6\x02\x00\x00\x00\x00\x00\x00\x00\x30\x30\x3F\x3F\x30\x30\x00\x00\x00",
+        "î": b"\x00\x00\x00\x08\x6C\xE6\xE6\x0C\x08\x00\x00\x00\x00\x00\x00\x30\x30\x3F\x3F\x30\x30\x00\x00\x00",
+        "ï": b"\x00\x00\x00\x0C\x6C\xE0\xEC\x0C\x00\x00\x00\x00\x00\x00\x00\x30\x30\x3F\x3F\x30\x30\x00\x00\x00",
+        "ñ": b"\x00\x00\xE0\xE8\x6C\x64\x6C\x68\xEC\xC4\x80\x00\x00\x00\x3F\x3F\x00\x00\x00\x00\x00\x3F\x3F\x00",
+        "ò": b"\x00\x80\xC0\xE0\x62\x66\x6C\x68\xE0\xC0\x80\x00\x00\x0F\x1F\x38\x30\x30\x30\x30\x38\x1F\x0F\x00",
+        "ó": b"\x00\x80\xC0\xE0\x68\x6C\x66\x62\xE0\xC0\x80\x00\x00\x0F\x1F\x38\x30\x30\x30\x30\x38\x1F\x0F\x00",
+        "ô": b"\x00\x80\xC0\xE8\x6C\x66\x66\x6C\xE8\xC0\x80\x00\x00\x0F\x1F\x38\x30\x30\x30\x30\x38\x1F\x0F\x00",
+        "õ": b"\x00\x80\xC8\xEC\x64\x6C\x68\x6C\xE4\xC0\x80\x00\x00\x0F\x1F\x38\x30\x30\x30\x30\x38\x1F\x0F\x00",
+        "ö": b"\x00\x80\xC0\xEC\x6C\x60\x60\x6C\xEC\xC0\x80\x00\x00\x0F\x1F\x38\x30\x30\x30\x30\x38\x1F\x0F\x00",
+        "÷": b"\x00\x00\x80\x80\x80\xB0\xB0\x80\x80\x80\x00\x00\x00\x00\x01\x01\x01\x0D\x0D\x01\x01\x01\x00\x00",
+        "ø": b"\x00\x80\xC0\xE0\x60\x60\x60\xE0\xC0\xE0\xA0\x00\x00\x2F\x3F\x18\x3C\x36\x33\x31\x38\x1F\x0F\x00",
+        "ù": b"\x00\xE0\xE0\x00\x02\x06\x0C\x08\x00\xE0\xE0\x00\x00\x0F\x1F\x38\x30\x30\x30\x30\x18\x3F\x3F\x00",
+        "ú": b"\x00\xE0\xE0\x00\x08\x0C\x06\x02\x00\xE0\xE0\x00\x00\x0F\x1F\x38\x30\x30\x30\x30\x18\x3F\x3F\x00",
+        "û": b"\x00\xE0\xE0\x08\x0C\x06\x06\x0C\x08\xE0\xE0\x00\x00\x0F\x1F\x38\x30\x30\x30\x30\x18\x3F\x3F\x00",
+        "ü": b"\x00\xE0\xE0\x0C\x0C\x00\x00\x0C\x0C\xE0\xE0\x00\x00\x0F\x1F\x38\x30\x30\x30\x30\x18\x3F\x3F\x00",
+        "ý": b"\x00\x00\x60\xE0\x80\x10\x18\x8C\xE4\x60\x00\x00\x00\x00\x00\x81\xE7\x7E\x1E\x07\x01\x00\x00\x00",
+        "þ": b"\x00\x00\x03\xFF\xFF\x1B\x18\x18\xF8\xF0\x00\x00\x00\x00\x30\x3F\x3F\x36\x06\x06\x07\x03\x00\x00",
+        "ÿ": b"\x00\x00\x60\xEC\x8C\x00\x00\x8C\xEC\x60\x00\x00\x00\x00\x00\x81\xE7\x7E\x1E\x07\x01\x00\x00\x00",
+        # U+0100..U+017F Latin Extended A
+        "Ā": b"\x00\x00\x00\xE0\xF9\x1D\x1D\xF9\xE0\x00\x00\x00\x00\x38\x3F\x07\x06\x06\x06\x06\x07\x3F\x38\x00",
+        "ā": b"\x00\x00\x40\x60\x68\x68\x68\x68\x68\xE0\xC0\x00\x00\x1C\x3E\x33\x33\x33\x33\x33\x33\x3F\x3F\x00",
+        "Ă": b"\x00\x00\x00\xE0\xF9\x1A\x1A\xF9\xE0\x00\x00\x00\x00\x38\x3F\x07\x06\x06\x06\x06\x07\x3F\x38\x00",
+        "ă": b"\x00\x00\x40\x60\x64\x68\x68\x68\x64\xE0\xC0\x00\x00\x1C\x3E\x33\x33\x33\x33\x33\x33\x3F\x3F\x00",
+        "Ą": b"\x00\x00\x00\xE0\xFC\x1F\x1F\xFC\xE0\x00\x00\x00\x00\x38\x3F\x07\x06\x06\x06\x06\x67\xBF\xB8\x00",
+        "ą": b"\x00\x00\x40\x60\x60\x60\x60\x60\x60\xE0\xC0\x00\x00\x1C\x3E\x33\x33\x33\x33\x33\x73\xBF\xBF\x00",
+        "Ć": b"\x00\x80\xE0\x70\x38\x18\x1A\x1B\x39\x70\x60\x00\x00\x03\x0F\x1C\x38\x30\x30\x30\x38\x1C\x0C\x00",
+        "ć": b"\x00\x80\xC0\xE0\x60\x60\x68\x6C\x64\xC0\x80\x00\x00\x0F\x1F\x38\x30\x30\x30\x30\x30\x18\x08\x00",
+        "Ĉ": b"\x00\x80\xE0\x70\x3A\x1B\x19\x1B\x3A\x70\x60\x00\x00\x03\x0F\x1C\x38\x30\x30\x30\x38\x1C\x0C\x00",
+        "ĉ": b"\x00\x80\xC0\xE0\x68\x6C\x64\x6C\x68\xC0\x80\x00\x00\x0F\x1F\x38\x30\x30\x30\x30\x30\x18\x08\x00",
+        "Ċ": b"\x00\x80\xE0\x70\x38\x18\x1A\x18\x38\x70\x60\x00\x00\x03\x0F\x1C\x38\x30\x30\x30\x38\x1C\x0C\x00",
+        "ċ": b"\x00\x80\xC0\xE0\x60\x60\x68\x60\x60\xC0\x80\x00\x00\x0F\x1F\x38\x30\x30\x30\x30\x30\x18\x08\x00",
+        "Č": b"\x00\x80\xE0\x70\x39\x1B\x1A\x1B\x39\x70\x60\x00\x00\x03\x0F\x1C\x38\x30\x30\x30\x38\x1C\x0C\x00",
+        "č": b"\x00\x80\xC0\xE0\x64\x6C\x68\x6C\x64\xC0\x80\x00\x00\x0F\x1F\x38\x30\x30\x30\x30\x30\x18\x08\x00",
+        "Ď": b"\x00\xF8\xF8\x19\x1B\x1A\x1B\x39\x70\xE0\x80\x00\x00\x3F\x3F\x30\x30\x30\x30\x38\x1C\x0F\x03\x00",
+        "ď": b"\x00\x80\xC0\xE0\x60\x60\xE0\xFF\xFF\x00\x05\x03\x00\x0F\x1F\x38\x30\x30\x30\x3F\x3F\x00\x00\x00",
+        "Đ": b"\xC0\xFF\xFF\xC3\xC3\x03\x03\x07\x0E\xFC\xF0\x00\x00\x3F\x3F\x30\x30\x30\x30\x38\x1C\x0F\x03\x00",
+        "đ": b"\x00\x80\xC0\xE0\x60\x60\x60\xE4\xC4\xFF\xFF\x04\x00\x0F\x1F\x38\x30\x30\x30\x30\x30\x3F\x3F\x00",
+        "Ē": b"\x00\xFC\xFC\x8C\x8D\x8D\x8D\x8D\x8C\x0C\x0C\x00\x00\x3F\x3F\x31\x31\x31\x31\x31\x31\x30\x30\x00",
+        "ē": b"\x00\x80\xC0\xE0\x68\x68\x68\x68\x68\xC0\x80\x00\x00\x0F\x1F\x3B\x33\x33\x33\x33\x33\x13\x01\x00",
+        "Ĕ": b"\x00\xF8\xF8\x98\x99\x9A\x9A\x99\x98\x18\x18\x00\x00\x3F\x3F\x31\x31\x31\x31\x31\x31\x30\x30\x00",
+        "ĕ": b"\x00\x80\xC0\xE0\x64\x68\x68\x68\x64\xC0\x80\x00\x00\x0F\x1F\x3B\x33\x33\x33\x33\x33\x13\x01\x00",
+        "Ė": b"\x00\xF8\xF8\x98\x98\x98\x9A\x98\x98\x18\x18\x00\x00\x3F\x3F\x31\x31\x31\x31\x31\x31\x30\x30\x00",
+        "ė": b"\x00\x80\xC0\xE0\x60\x60\x68\x60\x60\xC0\x80\x00\x00\x0F\x1F\x3B\x33\x33\x33\x33\x33\x13\x01\x00",
+        "Ę": b"\x00\xFF\xFF\xC3\xC3\xC3\xC3\xC3\xC3\x03\x03\x00\x00\x3F\x3F\x30\x30\x30\x30\x30\x70\xB0\xB0\x00",
+        "ę": b"\x00\x80\xC0\xE0\x60\x60\x60\x60\x60\xC0\x80\x00\x00\x0F\x1F\x3B\x33\x33\x73\xB3\xB3\x13\x01\x00",
+        "Ě": b"\x00\xF8\xF8\x98\x99\x9B\x9A\x9B\x99\x18\x18\x00\x00\x3F\x3F\x31\x31\x31\x31\x31\x31\x30\x30\x00",
+        "ě": b"\x00\x80\xC0\xE0\x64\x6C\x68\x6C\x64\xC0\x80\x00\x00\x0F\x1F\x3B\x33\x33\x33\x33\x33\x13\x01\x00",
+        "Ĝ": b"\x00\x80\xE0\x70\x1A\x1B\x19\x1B\x1A\x38\x30\x00\x00\x03\x0F\x1C\x38\x30\x33\x33\x33\x3F\x3F\x00",
+        "ĝ": b"\x00\x80\xC0\xE0\x68\x6C\x64\x6C\x68\xE0\xE0\x00\x00\x03\xC7\xCE\xCC\xCC\xCC\xCC\xE6\x7F\x3F\x00",
+        "Ğ": b"\x00\x80\xE0\x70\x1A\x19\x19\x19\x1A\x38\x30\x00\x00\x03\x0F\x1C\x38\x30\x33\x33\x33\x3F\x3F\x00",
+        "ğ": b"\x00\x80\xC0\xE0\x68\x64\x64\x64\x68\xE0\xE0\x00\x00\x03\xC7\xCE\xCC\xCC\xCC\xCC\xE6\x7F\x3F\x00",
+        "Ġ": b"\x00\x80\xE0\x70\x18\x18\x1A\x18\x18\x38\x30\x00\x00\x03\x0F\x1C\x38\x30\x33\x33\x33\x3F\x3F\x00",
+        "ġ": b"\x00\x80\xC0\xE0\x60\x60\x68\x60\x60\xE0\xE0\x00\x00\x03\xC7\xCE\xCC\xCC\xCC\xCC\xE6\x7F\x3F\x00",
+        "Ģ": b"\x00\xF0\xFC\x0E\x07\x03\xC3\xC3\xC3\xC7\xC6\x00\x00\x03\x0F\x1C\x38\x30\xB0\x70\x30\x3F\x3F\x00",
+        "ģ": b"\x00\x80\xC0\xE0\x60\x60\x6C\x6A\x60\xE0\xE0\x00\x00\x03\xC7\xCE\xCC\xCC\xCC\xCC\xE6\x7F\x3F\x00",
+        "Ĥ": b"\x00\xFC\xFC\x80\x82\x81\x81\x82\x80\xFC\xFC\x00\x00\x3F\x3F\x01\x01\x01\x01\x01\x01\x3F\x3F\x00",
+        "ĥ": b"\x00\xFE\xFE\xC0\x62\x63\x61\xE3\xC2\x80\x00\x00\x00\x3F\x3F\x00\x00\x00\x00\x00\x3F\x3F\x00\x00",
+        "Ħ": b"\x02\xFF\xFF\xC2\xC2\xC2\xC2\xC2\xC2\xFF\xFF\x02\x00\x3F\x3F\x00\x00\x00\x00\x00\x00\x3F\x3F\x00",
+        "ħ": b"\x04\xFF\xFF\xC4\x64\x60\x60\xE0\xC0\x80\x00\x00\x00\x3F\x3F\x00\x00\x00\x00\x00\x3F\x3F\x00\x00",
+        "Ĩ": b"\x00\x00\x00\x1A\x19\xFB\xFB\x1A\x19\x00\x00\x00\x00\x00\x00\x30\x30\x3F\x3F\x30\x30\x00\x00\x00",
+        "ĩ": b"\x00\x00\x00\x08\x64\xEC\xE8\x04\x00\x00\x00\x00\x00\x00\x00\x30\x30\x3F\x3F\x30\x30\x00\x00\x00",
+        "Ī": b"\x00\x00\x00\x0C\x0D\xFD\xFD\x0D\x0C\x00\x00\x00\x00\x00\x00\x30\x30\x3F\x3F\x30\x30\x00\x00\x00",
+        "ī": b"\x00\x00\x00\x08\x68\xE8\xE8\x00\x00\x00\x00\x00\x00\x00\x00\x30\x30\x3F\x3F\x30\x30\x00\x00\x00",
+        "Ĭ": b"\x00\x00\x00\x18\x19\xFA\xFA\x19\x18\x00\x00\x00\x00\x00\x00\x30\x30\x3F\x3F\x30\x30\x00\x00\x00",
+        "ĭ": b"\x00\x00\x00\x00\x64\xE8\xE8\x04\x00\x00\x00\x00\x00\x00\x00\x30\x30\x3F\x3F\x30\x30\x00\x00\x00",
+        "Į": b"\x00\x00\x00\x03\x03\xFF\xFF\x03\x03\x00\x00\x00\x00\x00\x00\x30\x30\x7F\xBF\xB0\x30\x00\x00\x00",
+        "į": b"\x00\x00\x00\x00\x60\xEC\xEC\x00\x00\x00\x00\x00\x00\x00\x00\x30\x30\x7F\xBF\xB0\x30\x00\x00\x00",
+        "İ": b"\x00\x00\x00\x18\x18\xF8\xFA\x18\x18\x00\x00\x00\x00\x00\x00\x30\x30\x3F\x3F\x30\x30\x00\x00\x00",
+        "ı": b"\x00\x00\x00\x00\x60\xE0\xE0\x00\x00\x00\x00\x00\x00\x00\x00\x30\x30\x3F\x3F\x30\x30\x00\x00\x00",
+        "IJ": b"\x00\x03\xFF\xFF\x03\x00\x00\x00\x03\xFF\xFF\x00\x00\x30\x3F\x3F\x30\x0C\x1C\x30\x30\x3F\x1F\x00",
+        "ij": b"\x00\x00\x20\xEC\xEC\x00\x00\x20\xEC\xEC\x00\x00\x00\x00\x30\x3F\x3F\x70\xC0\xC0\xFF\x7F\x00\x00",
+        "Ĵ": b"\x00\x00\x00\x00\x02\x03\x01\x03\x02\xF8\xF8\x00\x00\x0E\x1E\x38\x30\x30\x30\x30\x38\x1F\x07\x00",
+        "ĵ": b"\x00\x00\x00\x00\x00\x08\x6C\xE4\xEC\x08\x00\x00\x00\x00\x00\x60\xE0\xC0\xC0\xFF\x7F\x00\x00\x00",
+        "Ķ": b"\x00\xFF\xFF\xC0\xE0\xF0\x38\x1C\x0E\x07\x03\x00\x00\x3F\x3F\x00\x01\xA3\x67\x0E\x1C\x38\x30\x00",
+        "ķ": b"\x00\x00\xFF\xFF\x00\x80\xC0\xE0\x60\x00\x00\x00\x00\x00\x3F\x3F\x03\xA7\x6F\x1C\x38\x30\x00\x00",
+        "ĸ": b"\x00\x00\xE0\xE0\x00\x80\xC0\xE0\x60\x20\x00\x00\x00\x00\x3F\x3F\x03\x07\x0F\x1C\x38\x30\x00\x00",
+        "Ĺ": b"\x00\xF8\xFA\x03\x01\x00\x00\x00\x00\x00\x00\x00\x00\x3F\x3F\x30\x30\x30\x30\x30\x30\x30\x30\x00",
+        "ĺ": b"\x00\x00\x00\x00\x18\xFA\xFB\x01\x00\x00\x00\x00\x00\x00\x00\x30\x30\x3F\x3F\x30\x30\x00\x00\x00",
+        "Ļ": b"\x00\xFF\xFF\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x3F\x3F\x30\x30\xB0\x70\x30\x30\x30\x30\x00",
+        "ļ": b"\x00\x00\x00\x00\x03\xFF\xFF\x00\x00\x00\x00\x00\x00\x00\x00\x30\x30\xBF\x7F\x30\x30\x00\x00\x00",
+        "Ľ": b"\x00\xFF\xFF\x00\x00\x05\x03\x00\x00\x00\x00\x00\x00\x3F\x3F\x30\x30\x30\x30\x30\x30\x30\x30\x00",
+        "ľ": b"\x00\x00\x00\x00\x03\xFF\xFF\x00\x05\x03\x00\x00\x00\x00\x00\x30\x30\x3F\x3F\x30\x30\x00\x00\x00",
+        "Ŀ": b"\x00\xFF\xFF\x00\x00\x00\x20\x00\x00\x00\x00\x00\x00\x3F\x3F\x30\x30\x30\x30\x30\x30\x30\x30\x00",
+        "ŀ": b"\x00\x00\x00\x00\x03\xFF\xFF\x00\x40\x00\x00\x00\x00\x00\x00\x30\x30\x3F\x3F\x30\x30\x00\x00\x00",
+        "Ł": b"\x80\xFF\xFF\x20\x10\x00\x00\x00\x00\x00\x00\x00\x00\x3F\x3F\x30\x30\x30\x30\x30\x30\x30\x30\x00",
+        "ł": b"\x00\x00\x00\x00\x83\xFF\xFF\x20\x10\x00\x00\x00\x00\x00\x00\x31\x30\x3F\x3F\x30\x30\x00\x00\x00",
+        "Ń": b"\x00\xFF\xFF\x0E\x38\xF2\xC3\x01\x00\xFF\xFF\x00\x00\x3F\x3F\x00\x00\x00\x03\x07\x1C\x3F\x3F\x00",
+        "ń": b"\x00\x00\xE0\xE0\x60\x68\x6C\x64\xE0\xC0\x80\x00\x00\x00\x3F\x3F\x00\x00\x00\x00\x00\x3F\x3F\x00",
+        "Ņ": b"\x00\xFF\xFF\x0E\x38\xF0\xC0\x00\x00\xFF\xFF\x00\x00\x3F\x3F\x00\x00\xA0\x63\x07\x1C\x3F\x3F\x00",
+        "ņ": b"\x00\x00\xE0\xE0\x60\x60\x60\x60\xE0\xC0\x80\x00\x00\x00\x3F\x3F\x00\x00\xA0\x60\x00\x3F\x3F\x00",
+        "Ň": b"\x00\xFF\xFF\x0E\x38\xF1\xC2\x01\x00\xFF\xFF\x00\x00\x3F\x3F\x00\x00\x00\x03\x07\x1C\x3F\x3F\x00",
+        "ň": b"\x00\x00\xE0\xE0\x64\x6C\x68\x6C\xE4\xC0\x80\x00\x00\x00\x3F\x3F\x00\x00\x00\x00\x00\x3F\x3F\x00",
+        "ʼn": b"\x00\x0A\xE6\xE0\x60\x60\x60\x60\xE0\xC0\x80\x00\x00\x00\x3F\x3F\x00\x00\x00\x00\x00\x3F\x3F\x00",
+        "Ŋ": b"\x00\x00\xFF\xFF\x06\x03\x03\x03\x07\xFE\xFC\x00\x00\x00\x3F\x3F\x00\x00\x20\x20\x30\x1F\x0F\x00",
+        "ŋ": b"\x00\x00\xE0\xE0\x60\x60\x60\x60\xE0\xC0\x80\x00\x00\x00\x3F\x3F\x00\x00\x00\xC0\xC0\xFF\x7F\x00",
+        "Ō": b"\x00\xC0\xF0\x38\x1D\x0D\x0D\x1D\x38\xF0\xC0\x00\x00\x03\x0F\x1C\x38\x30\x30\x38\x1C\x0F\x03\x00",
+        "ō": b"\x00\x80\xC0\xE0\x68\x68\x68\x68\xE0\xC0\x80\x00\x00\x0F\x1F\x38\x30\x30\x30\x30\x38\x1F\x0F\x00",
+        "Ŏ": b"\x00\x80\xE0\x70\x39\x1A\x1A\x39\x70\xE0\x80\x00\x00\x03\x0F\x1C\x38\x30\x30\x38\x1C\x0F\x03\x00",
+        "ŏ": b"\x00\x80\xC0\xE0\x64\x68\x68\x64\xE0\xC0\x80\x00\x00\x0F\x1F\x38\x30\x30\x30\x30\x38\x1F\x0F\x00",
+        "Ő": b"\x00\x80\xE0\x70\x3A\x19\x1A\x39\x70\xE0\x80\x00\x00\x03\x0F\x1C\x38\x30\x30\x38\x1C\x0F\x03\x00",
+        "ő": b"\x00\x80\xC0\xE0\x68\x64\x68\x64\xE0\xC0\x80\x00\x00\x0F\x1F\x38\x30\x30\x30\x30\x38\x1F\x0F\x00",
+        "Œ": b"\xF0\xFC\x0E\x03\x03\x07\xFE\xFF\xC3\xC3\xC3\x00\x03\x0F\x1C\x30\x30\x38\x1F\x3F\x30\x30\x30\x00",
+        "œ": b"\x80\xC0\xE0\x60\x60\xE0\xC0\x60\x60\x60\x40\x80\x0F\x1F\x38\x30\x30\x1F\x1F\x3B\x33\x33\x1B\x09",
+        "Ŕ": b"\x00\xF8\xF8\x98\x98\x9A\x9B\x99\xF8\xF0\x60\x00\x00\x3F\x3F\x01\x01\x03\x07\x0F\x1D\x38\x30\x00",
+        "ŕ": b"\x00\x00\xE0\xE0\xC0\x60\x68\x6C\x64\xE0\xC0\x00\x00\x00\x3F\x3F\x00\x00\x00\x00\x00\x00\x00\x00",
+        "Ŗ": b"\x00\xFF\xFF\x83\x83\x83\x83\x83\xC7\xFE\x7C\x00\x00\x3F\x3F\x01\x01\xA3\x67\x0F\x1D\x38\x30\x00",
+        "ŗ": b"\x00\x00\xE0\xE0\xC0\x60\x60\x60\x60\xE0\xC0\x00\x00\x00\x3F\x3F\x00\xA0\x60\x00\x00\x00\x00\x00",
+        "Ř": b"\x00\xF8\xF8\x99\x9B\x9A\x9B\x99\xF8\xF0\x60\x00\x00\x3F\x3F\x01\x01\x03\x07\x0F\x1D\x38\x30\x00",
+        "ř": b"\x00\x00\xE0\xE0\xC4\x6C\x68\x6C\x64\xE0\xC0\x00\x00\x00\x3F\x3F\x00\x00\x00\x00\x00\x00\x00\x00",
+        "Ś": b"\x00\x60\xF0\xF8\x98\x9A\x9B\x99\x98\x30\x20\x00\x00\x0C\x1C\x39\x31\x31\x31\x31\x3B\x1F\x0E\x00",
+        "ś": b"\x00\xC0\xE0\x60\x68\x6C\x64\x60\x40\x00\x00\x00\x00\x11\x33\x33\x33\x33\x33\x3F\x1E\x00\x00\x00",
+        "Ŝ": b"\x00\x60\xF0\xF8\x9A\x9B\x99\x9B\x9A\x30\x20\x00\x00\x0C\x1C\x39\x31\x31\x31\x31\x3B\x1F\x0E\x00",
+        "ŝ": b"\x00\xC0\xE0\x68\x6C\x64\x6C\x68\x40\x00\x00\x00\x00\x11\x33\x33\x33\x33\x33\x3F\x1E\x00\x00\x00",
+        "Ş": b"\x00\x3C\x7E\xE7\xC3\xC3\xC3\xC3\xC7\x8E\x0C\x00\x00\x0C\x1C\x38\x30\xB0\xF0\x30\x39\x1F\x0F\x00",
+        "ş": b"\x00\xC0\xE0\x60\x60\x60\x60\x60\x40\x00\x00\x00\x00\x11\x33\x33\xB3\xF3\x33\x3F\x1E\x00\x00\x00",
+        "Š": b"\x00\x60\xF0\xF8\x99\x9B\x9A\x9B\x99\x30\x20\x00\x00\x0C\x1C\x39\x31\x31\x31\x31\x3B\x1F\x0E\x00",
+        "š": b"\x00\xC0\xE0\x64\x6C\x68\x6C\x64\x40\x00\x00\x00\x00\x11\x33\x33\x33\x33\x33\x3F\x1E\x00\x00\x00",
+        "Ţ": b"\x00\x00\x03\x03\x03\xFF\xFF\x03\x03\x03\x00\x00\x00\x00\x00\x00\x00\xBF\xBF\x60\x00\x00\x00\x00",
+        "ţ": b"\x00\x60\x60\xFE\xFE\x60\x60\x60\x00\x00\x00\x00\x00\x00\x00\x1F\x3F\xB0\xB0\xF0\x30\x00\x00\x00",
+        "Ť": b"\x00\x00\x18\x19\x1B\xFA\xFA\x1B\x19\x18\x00\x00\x00\x00\x00\x00\x00\x3F\x3F\x00\x00\x00\x00\x00",
+        "ť": b"\x00\x60\x60\xFE\xFE\x60\x65\x63\x00\x00\x00\x00\x00\x00\x00\x1F\x3F\x30\x30\x30\x30\x00\x00\x00",
+        "Ŧ": b"\x00\x00\x03\xC3\xC3\xFF\xFF\xC3\xC3\x03\x00\x00\x00\x00\x00\x00\x00\x3F\x3F\x00\x00\x00\x00\x00",
+        "ŧ": b"\x00\x30\x30\xFE\xFE\x30\x30\x30\x00\x00\x00\x00\x00\x03\x03\x1F\x3F\x33\x33\x30\x30\x00\x00\x00",
+        "Ũ": b"\x00\xF8\xF8\x02\x01\x03\x03\x02\x01\xF8\xF8\x00\x00\x07\x1F\x38\x30\x30\x30\x30\x38\x1F\x07\x00",
+        "ũ": b"\x00\xE0\xE0\x08\x04\x0C\x0C\x08\x04\xE0\xE0\x00\x00\x0F\x1F\x38\x30\x30\x30\x30\x18\x3F\x3F\x00",
+        "Ū": b"\x00\xFC\xFC\x00\x01\x01\x01\x01\x00\xFC\xFC\x00\x00\x07\x1F\x38\x30\x30\x30\x30\x38\x1F\x07\x00",
+        "ū": b"\x00\xE0\xE0\x00\x08\x08\x08\x08\x00\xE0\xE0\x00\x00\x0F\x1F\x38\x30\x30\x30\x30\x18\x3F\x3F\x00",
+        "Ŭ": b"\x00\xFC\xFC\x00\x01\x02\x02\x01\x00\xFC\xFC\x00\x00\x07\x1F\x38\x30\x30\x30\x30\x38\x1F\x07\x00",
+        "ŭ": b"\x00\xE0\xE0\x00\x04\x08\x08\x04\x00\xE0\xE0\x00\x00\x0F\x1F\x38\x30\x30\x30\x30\x18\x3F\x3F\x00",
+        "Ů": b"\x00\xF8\xF8\x00\x06\x09\x09\x06\x00\xF8\xF8\x00\x00\x07\x1F\x38\x30\x30\x30\x30\x38\x1F\x07\x00",
+        "ů": b"\x00\xE0\xE0\x00\x0C\x12\x12\x0C\x00\xE0\xE0\x00\x00\x0F\x1F\x38\x30\x30\x30\x30\x18\x3F\x3F\x00",
+        "Ű": b"\x00\xF8\xF8\x00\x02\x01\x02\x01\x00\xF8\xF8\x00\x00\x07\x1F\x38\x30\x30\x30\x30\x38\x1F\x07\x00",
+        "ű": b"\x00\xE0\xE0\x00\x08\x04\x08\x04\x00\xE0\xE0\x00\x00\x0F\x1F\x38\x30\x30\x30\x30\x18\x3F\x3F\x00",
+        "Ų": b"\x00\xFF\xFF\x00\x00\x00\x00\x00\x00\xFF\xFF\x00\x00\x07\x1F\x38\x30\xF0\xB0\xB0\x38\x1F\x07\x00",
+        "ų": b"\x00\xE0\xE0\x00\x00\x00\x00\x00\x00\xE0\xE0\x00\x00\x0F\x1F\x38\x30\xF0\xB0\xB0\x18\x3F\x3F\x00",
+        "Ŵ": b"\x00\xFC\xFC\x00\x02\x81\x81\x02\x00\xFC\xFC\x00\x00\x3F\x3F\x1C\x06\x03\x03\x06\x1C\x3F\x3F\x00",
+        "ŵ": b"\x00\xE0\xE0\x00\x04\xE8\xE8\x04\x00\xE0\xE0\x00\x00\x07\x1F\x38\x1C\x0F\x0F\x1C\x38\x1F\x07\x00",
+        "Ŷ": b"\x00\x02\x0E\x3C\xF2\xC1\xC1\xF2\x3C\x0E\x02\x00\x00\x00\x00\x00\x00\x3F\x3F\x00\x00\x00\x00\x00",
+        "ŷ": b"\x00\x00\x60\xE0\x88\x04\x04\x88\xE0\x60\x00\x00\x00\x00\x00\x81\xE7\x7E\x1E\x07\x01\x00\x00\x00",
+        "Ÿ": b"\x00\x02\x0E\x3C\xF1\xC0\xC0\xF1\x3C\x0E\x02\x00\x00\x00\x00\x00\x00\x3F\x3F\x00\x00\x00\x00\x00",
+        "Ź": b"\x00\x18\x18\x18\x18\x1A\x9B\xD9\xF8\x78\x38\x00\x00\x30\x38\x3C\x3E\x37\x33\x31\x30\x30\x30\x00",
+        "ź": b"\x00\x60\x60\x60\x68\x6C\xE4\xE0\x60\x20\x00\x00\x00\x30\x38\x3C\x36\x33\x31\x30\x30\x30\x00\x00",
+        "Ż": b"\x00\x18\x18\x18\x18\x18\x9A\xD8\xF8\x78\x38\x00\x00\x30\x38\x3C\x3E\x37\x33\x31\x30\x30\x30\x00",
+        "ż": b"\x00\x60\x60\x60\x60\x68\xE0\xE0\x60\x20\x00\x00\x00\x30\x38\x3C\x36\x33\x31\x30\x30\x30\x00\x00",
+        "Ž": b"\x00\x18\x18\x18\x19\x1B\x9A\xDB\xF9\x78\x38\x00\x00\x30\x38\x3C\x3E\x37\x33\x31\x30\x30\x30\x00",
+        "ž": b"\x00\x60\x60\x64\x6C\x68\xEC\xE4\x60\x20\x00\x00\x00\x30\x38\x3C\x36\x33\x31\x30\x30\x30\x00\x00",
+        "ſ": b"\x00\x00\x00\x00\xFC\xFE\x06\x06\x0E\x0C\x00\x00\x00\x00\x30\x30\x3F\x3F\x30\x00\x00\x00\x00\x00",
+    }
+    return font
+
+
+def get_font_map_cyrillic() -> Dict[str, bytes]:
+    font = {
+        # U+0400..U+04FF Cyrillic
+        "Ѐ": b"\x00\xFC\xFC\x8D\x8F\x8E\x8C\x8C\x8C\x0C\x0C\x00\x00\x3F\x3F\x31\x31\x31\x31\x31\x31\x30\x30\x00",
+        "Ё": b"\x00\xFE\xFE\xC7\xC7\xC6\xC6\xC7\xC7\x06\x06\x00\x00\x3F\x3F\x30\x30\x30\x30\x30\x30\x30\x30\x00",
+        "Ђ": b"\x00\x03\xFF\xFF\x83\xC3\xC3\xC3\xC0\x80\x00\x00\x00\x00\x3F\x3F\x01\x00\x30\x30\x39\x1F\x0F\x00",
+        "Ѓ": b"\x00\xFC\xFC\x0C\x0C\x0C\x0E\x0F\x0D\x0C\x0C\x00\x00\x3F\x3F\x00\x00\x00\x00\x00\x00\x00\x00\x00",
+        "Є": b"\x00\xF8\xFC\xCE\xC7\xC3\xC3\xC3\x07\x0E\x0C\x00\x00\x07\x0F\x1C\x38\x30\x30\x30\x38\x1C\x0C\x00",
+        "Ѕ": b"\x00\x3C\x7E\x67\xE3\xC3\xC3\xC3\x87\x8E\x0C\x00\x00\x0C\x1C\x38\x30\x30\x30\x31\x39\x1F\x0F\x00",
+        "І": b"\x00\x00\x00\x03\x03\xFF\xFF\x03\x03\x00\x00\x00\x00\x00\x00\x30\x30\x3F\x3F\x30\x30\x00\x00\x00",
+        "Ї": b"\x00\x00\x00\x0D\x0D\xFC\xFC\x0D\x0D\x00\x00\x00\x00\x00\x00\x30\x30\x3F\x3F\x30\x30\x00\x00\x00",
+        "Ј": b"\x00\x00\x00\x00\x00\x00\x03\x03\x03\xFF\xFF\x00\x00\x0E\x1E\x38\x30\x30\x30\x30\x38\x1F\x0F\x00",
+        "Љ": b"\x00\x00\xFE\xFF\x03\x03\xFF\xFF\xC0\xC0\x80\x00\x00\x30\x3F\x1F\x00\x00\x3F\x3F\x30\x39\x1F\x0F",
+        "Њ": b"\x00\xFF\xFF\xC0\xC0\xC0\xFF\xFF\xC0\xC0\x80\x00\x00\x3F\x3F\x00\x00\x00\x3F\x3F\x30\x39\x1F\x0F",
+        "Ћ": b"\x00\x03\xFF\xFF\xC3\xC3\xC3\xC3\xC0\x80\x00\x00\x00\x00\x3F\x3F\x01\x00\x00\x00\x01\x3F\x3F\x00",
+        "Ќ": b"\x00\xFF\xFF\xC0\xE2\xF3\x39\x1C\x0E\x07\x03\x00\x00\x3F\x3F\x00\x01\x03\x07\x0E\x1C\x38\x30\x00",
+        "Ѝ": b"\x00\xFF\xFF\x00\x01\xC3\xF2\x38\x0E\xFF\xFF\x00\x00\x3F\x3F\x1C\x07\x03\x00\x00\x00\x3F\x3F\x00",
+        "Ў": b"\x00\x07\x1F\x7C\xF1\xC1\xC1\xF1\x7C\x1F\x07\x00\x00\x00\x30\x30\x3C\x0F\x07\x01\x00\x00\x00\x00",
+        "Џ": b"\x00\xFF\xFF\x00\x00\x00\x00\x00\x00\xFF\xFF\x00\x00\x1F\x1F\x18\x18\x78\x78\x18\x18\x1F\x1F\x00",
+        "А": b"\x00\x00\x00\xE0\xFC\x1F\x1F\xFC\xE0\x00\x00\x00\x00\x38\x3F\x07\x06\x06\x06\x06\x07\x3F\x38\x00",
+        "Б": b"\x00\xFF\xFF\xC3\xC3\xC3\xC3\xC3\xC3\x83\x00\x00\x00\x3F\x3F\x30\x30\x30\x30\x30\x39\x1F\x0F\x00",
+        "В": b"\x00\xFF\xFF\xC3\xC3\xC3\xC3\xE7\xFE\xBC\x00\x00\x00\x3F\x3F\x30\x30\x30\x30\x30\x39\x1F\x0F\x00",
+        "Г": b"\x00\xFF\xFF\x03\x03\x03\x03\x03\x03\x03\x03\x00\x00\x3F\x3F\x00\x00\x00\x00\x00\x00\x00\x00\x00",
+        "Ґ": b"\x00\xFC\xFC\x0C\x0C\x0C\x0C\x0C\x0C\x0F\x0F\x00\x00\x3F\x3F\x00\x00\x00\x00\x00\x00\x00\x00\x00",
+        "Д": b"\x00\x00\xF8\xFE\x0F\x03\x03\x03\xFF\xFF\x00\x00\x00\x70\x7F\x1F\x18\x18\x18\x18\x1F\x7F\x70\x00",
+        "Е": b"\x00\xFF\xFF\xC3\xC3\xC3\xC3\xC3\xC3\x03\x03\x00\x00\x3F\x3F\x30\x30\x30\x30\x30\x30\x30\x30\x00",
+        "Ж": b"\x00\x03\x0F\xFC\xE0\xFF\xFF\xE0\xFC\x0F\x03\x00\x00\x38\x3F\x07\x00\x3F\x3F\x00\x07\x3F\x38\x00",
+        "З": b"\x0C\x0E\x07\x03\xC3\xC3\xC3\xC3\xC3\xE7\x7E\x3C\x0C\x1C\x38\x30\x30\x30\x30\x30\x30\x39\x1F\x0E",
+        "И": b"\x00\xFF\xFF\x00\x00\xC0\xF0\x38\x0E\xFF\xFF\x00\x00\x3F\x3F\x1C\x07\x03\x00\x00\x00\x3F\x3F\x00",
+        "Й": b"\x00\xFF\xFF\x00\x02\xC3\xF1\x38\x0E\xFF\xFF\x00\x00\x3F\x3F\x1C\x07\x03\x00\x00\x00\x3F\x3F\x00",
+        "К": b"\x00\xFF\xFF\xC0\xE0\xF0\x38\x1C\x0E\x07\x03\x00\x00\x3F\x3F\x00\x01\x03\x07\x0E\x1C\x38\x30\x00",
+        "Л": b"\x00\x00\xF0\xFC\x1E\x07\x03\x03\x03\xFF\xFF\x00\x00\x30\x3F\x1F\x00\x00\x00\x00\x00\x3F\x3F\x00",
+        "М": b"\x00\xFF\xFF\x1E\x78\xE0\xE0\x78\x1E\xFF\xFF\x00\x00\x3F\x3F\x00\x00\x01\x01\x00\x00\x3F\x3F\x00",
+        "Н": b"\x00\xFF\xFF\xC0\xC0\xC0\xC0\xC0\xC0\xFF\xFF\x00\x00\x3F\x3F\x00\x00\x00\x00\x00\x00\x3F\x3F\x00",
+        "О": b"\x00\xF0\xFC\x0E\x07\x03\x03\x07\x0E\xFC\xF0\x00\x00\x03\x0F\x1C\x38\x30\x30\x38\x1C\x0F\x03\x00",
+        "П": b"\x00\xFF\xFF\x03\x03\x03\x03\x03\x03\xFF\xFF\x00\x00\x3F\x3F\x00\x00\x00\x00\x00\x00\x3F\x3F\x00",
+        "Р": b"\x00\xFF\xFF\x83\x83\x83\x83\x83\xC7\xFE\x7C\x00\x00\x3F\x3F\x01\x01\x01\x01\x01\x01\x00\x00\x00",
+        "С": b"\x00\xF0\xFC\x0E\x07\x03\x03\x03\x07\x0E\x0C\x00\x00\x03\x0F\x1C\x38\x30\x30\x30\x38\x1C\x0C\x00",
+        "Т": b"\x00\x03\x03\x03\x03\xFF\xFF\x03\x03\x03\x03\x00\x00\x00\x00\x00\x00\x3F\x3F\x00\x00\x00\x00\x00",
+        "У": b"\x00\x07\x1F\x7C\xF0\xC0\xC0\xF0\x7C\x1F\x07\x00\x00\x00\x30\x30\x3C\x0F\x07\x01\x00\x00\x00\x00",
+        "Ф": b"\x00\xF8\xFC\x0E\x06\xFF\xFF\x06\x0E\xFC\xF8\x00\x00\x03\x07\x0E\x0C\x3F\x3F\x0C\x0E\x07\x03\x00",
+        "Х": b"\x00\x03\x0F\x3C\xF0\xC0\xC0\xF0\x3C\x0F\x03\x00\x00\x30\x3C\x0F\x03\x00\x00\x03\x0F\x3C\x30\x00",
+        "Ц": b"\x00\xFF\xFF\x00\x00\x00\x00\x00\xFF\xFF\x00\x00\x00\x1F\x1F\x18\x18\x18\x18\x18\x1F\x7F\x78\x00",
+        "Ч": b"\x00\x7F\xFF\xC0\xC0\xC0\xC0\xC0\xC0\xFF\xFF\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x3F\x3F\x00",
+        "Ш": b"\x00\xFF\xFF\x00\x00\xFF\xFF\x00\x00\xFF\xFF\x00\x00\x3F\x3F\x30\x30\x3F\x3F\x30\x30\x3F\x3F\x00",
+        "Щ": b"\x00\xFF\xFF\x00\x00\xFF\xFF\x00\x00\xFF\xFF\x00\x00\x1F\x1F\x18\x18\x1F\x1F\x18\x18\x1F\x7F\x70",
+        "Ъ": b"\x03\x03\xFF\xFF\xC0\xC0\xC0\xC0\xC0\x80\x00\x00\x00\x00\x3F\x3F\x30\x30\x30\x30\x39\x1F\x0F\x00",
+        "Ы": b"\x00\xFF\xFF\xC0\xC0\xC0\xC0\x80\x00\x00\xFF\xFF\x00\x3F\x3F\x30\x30\x30\x39\x1F\x0F\x00\x3F\x3F",
+        "Ь": b"\x00\xFF\xFF\xC0\xC0\xC0\xC0\xC0\xC0\x80\x00\x00\x00\x3F\x3F\x30\x30\x30\x30\x30\x39\x1F\x0F\x00",
+        "Э": b"\x00\x0C\x0E\x07\xC3\xC3\xC3\xC7\xCE\xFC\xF8\x00\x00\x0C\x1C\x38\x30\x30\x30\x38\x1C\x0F\x07\x00",
+        "Ю": b"\x00\xFF\xFF\xC0\xFC\xFE\x07\x03\x07\xFE\xFC\x00\x00\x3F\x3F\x00\x0F\x1F\x38\x30\x38\x1F\x0F\x00",
+        "Я": b"\x00\x7C\xFE\xC7\x83\x83\x83\x83\x83\xFF\xFF\x00\x00\x30\x38\x1D\x0F\x07\x03\x01\x01\x3F\x3F\x00",
+        "а": b"\x00\x00\x30\x30\x30\x30\x30\x30\x30\xF0\xE0\x00\x00\x1E\x3F\x33\x33\x33\x33\x33\x33\x3F\x3F\x00",
+        "б": b"\x00\xE0\xF0\x30\x30\x30\x30\x30\x30\x30\x00\x00\x00\x1F\x3F\x33\x33\x33\x33\x33\x33\x3F\x1E\x00",
+        "в": b"\x00\xF0\xF0\x30\x30\x30\x30\x30\xF0\xE0\x00\x00\x00\x3F\x3F\x33\x33\x33\x33\x33\x33\x3F\x1E\x00",
+        "г": b"\x00\xF0\xF0\x30\x30\x30\x30\x30\x30\x30\x30\x00\x00\x3F\x3F\x00\x00\x00\x00\x00\x00\x00\x00\x00",
+        "ґ": b"\x00\xF0\xF0\x30\x30\x30\x30\x30\x30\x3C\x3C\x00\x00\x3F\x3F\x00\x00\x00\x00\x00\x00\x00\x00\x00",
+        "д": b"\x00\x00\xC0\xE0\x70\x30\x30\x30\xF0\xF0\x00\x00\x00\x60\x7F\x3F\x30\x30\x30\x30\x3F\x7F\x60\x00",
+        "е": b"\x00\xE0\xF0\x30\x30\x30\x30\x30\x30\xF0\xE0\x00\x00\x1F\x3F\x33\x33\x33\x33\x33\x33\x33\x33\x00",
+        "ж": b"\x00\x30\xF0\xC0\x00\xF0\xF0\x00\xC0\xF0\x30\x00\x00\x30\x3C\x0F\x03\x3F\x3F\x03\x0F\x3C\x30\x00",
+        "з": b"\x00\x60\x70\x30\x30\x30\x30\x30\x30\xF0\xE0\x00\x00\x18\x38\x30\x33\x33\x33\x33\x33\x3F\x1D\x00",
+        "и": b"\x00\xF0\xF0\x00\x00\x00\x80\xC0\xE0\xF0\xF0\x00\x00\x3F\x3F\x1C\x0E\x07\x03\x01\x00\x3F\x3F\x00",
+        "й": b"\x00\xF0\xF0\x00\x04\x08\x88\xC4\xE0\xF0\xF0\x00\x00\x3F\x3F\x1C\x0E\x07\x03\x01\x00\x3F\x3F\x00",
+        "к": b"\x00\xF0\xF0\x80\x80\xC0\xE0\x70\x30\x10\x00\x00\x00\x3F\x3F\x03\x03\x07\x0E\x1C\x38\x30\x20\x00",
+        "л": b"\x00\x00\xC0\xE0\x70\x30\x30\x30\x30\xF0\xF0\x00\x00\x30\x3F\x1F\x00\x00\x00\x00\x00\x3F\x3F\x00",
+        "м": b"\x00\xF0\xF0\xE0\xC0\x80\x80\xC0\xE0\xF0\xF0\x00\x00\x3F\x3F\x00\x01\x03\x03\x01\x00\x3F\x3F\x00",
+        "н": b"\x00\xF0\xF0\x00\x00\x00\x00\x00\x00\xF0\xF0\x00\x00\x3F\x3F\x03\x03\x03\x03\x03\x03\x3F\x3F\x00",
+        "о": b"\x00\xC0\xE0\x70\x30\x30\x30\x30\x70\xE0\xC0\x00\x00\x0F\x1F\x38\x30\x30\x30\x30\x38\x1F\x0F\x00",
+        "п": b"\x00\xF0\xF0\x30\x30\x30\x30\x30\x30\xF0\xF0\x00\x00\x3F\x3F\x00\x00\x00\x00\x00\x00\x3F\x3F\x00",
+        "р": b"\x00\xF0\xF0\x30\x30\x30\x30\x30\x70\xE0\xC0\x00\x00\xFF\xFF\x0C\x0C\x0C\x0C\x0C\x0E\x07\x03\x00",
+        "с": b"\x00\xC0\xE0\x70\x30\x30\x30\x30\x70\x60\x40\x00\x00\x0F\x1F\x38\x30\x30\x30\x30\x38\x18\x08\x00",
+        "т": b"\x00\x30\x30\x30\x30\xF0\xF0\x30\x30\x30\x30\x00\x00\x00\x00\x00\x00\x3F\x3F\x00\x00\x00\x00\x00",
+        "у": b"\x00\x30\xF0\xC0\x00\x00\x00\x00\xC0\xF0\x30\x00\x00\x60\xE0\xC3\xE7\x7C\x3C\x0F\x03\x00\x00\x00",
+        "ф": b"\x00\x80\xC0\x60\x60\xF0\xF0\x60\x60\xC0\x80\x00\x00\x0F\x1F\x30\x30\xFF\xFF\x30\x30\x1F\x0F\x00",
+        "х": b"\x00\x30\x70\xC0\x80\x00\x00\x80\xC0\x70\x30\x00\x00\x30\x38\x0C\x07\x03\x03\x07\x0C\x38\x30\x00",
+        "ц": b"\x00\xF0\xF0\x00\x00\x00\x00\x00\xF0\xF0\x00\x00\x00\x3F\x3F\x30\x30\x30\x30\x30\x3F\xFF\xF0\x00",
+        "ч": b"\x00\xF0\xF0\x00\x00\x00\x00\x00\x00\xF0\xF0\x00\x00\x01\x03\x03\x03\x03\x03\x03\x03\x3F\x3F\x00",
+        "ш": b"\x00\xF0\xF0\x00\x00\xE0\xE0\x00\x00\xF0\xF0\x00\x00\x3F\x3F\x30\x30\x3F\x3F\x30\x30\x3F\x3F\x00",
+        "щ": b"\x00\xF0\xF0\x00\x00\xF0\xF0\x00\x00\xF0\xF0\x00\x00\x3F\x3F\x30\x30\x3F\x3F\x30\x30\x3F\xFF\xE0",
+        "ъ": b"\x30\x30\xF0\xF0\x80\x80\x80\x80\x80\x00\x00\x00\x00\x00\x3F\x3F\x31\x31\x31\x31\x3B\x1F\x0E\x00",
+        "ы": b"\x00\xF0\xF0\x80\x80\x80\x00\x00\x00\xF0\xF0\x00\x00\x3F\x3F\x31\x31\x3B\x1F\x0E\x00\x3F\x3F\x00",
+        "ь": b"\x00\xF0\xF0\x80\x80\x80\x80\x80\x80\x00\x00\x00\x00\x3F\x3F\x31\x31\x31\x31\x31\x3B\x1F\x0E\x00",
+        "э": b"\x00\x40\x60\x70\x30\x30\x30\x30\x70\xE0\xC0\x00\x00\x08\x18\x38\x30\x33\x33\x33\x3B\x1F\x0F\x00",
+        "ю": b"\x00\xF0\xF0\x00\xE0\xF0\x30\x30\x30\xF0\xE0\x00\x00\x3F\x3F\x03\x1F\x3F\x30\x30\x30\x3F\x1F\x00",
+        "я": b"\x00\xC0\xE0\x70\x30\x30\x30\x30\x30\xF0\xF0\x00\x00\x21\x33\x3B\x1E\x0E\x06\x06\x06\x3F\x3F\x00",
+        "ѐ": b"\x00\xE0\xF0\x32\x36\x36\x34\x30\x30\xF0\xE0\x00\x00\x1F\x3F\x33\x33\x33\x33\x33\x33\x33\x33\x00",
+        "ё": b"\x00\xE0\xF0\x34\x34\x30\x30\x34\x34\xF0\xE0\x00\x00\x1F\x3F\x33\x33\x33\x33\x33\x33\x33\x33\x00",
+        "ђ": b"\x00\x30\xFC\xFC\x30\xB0\xB0\xB0\x80\x80\x00\x00\x00\x00\x3F\x3F\x07\x03\x01\x01\xC1\xFF\x3F\x00",
+        "ѓ": b"\x00\xF0\xF0\x30\x30\x34\x36\x32\x30\x30\x30\x00\x00\x3F\x3F\x00\x00\x00\x00\x00\x00\x00\x00\x00",
+        "є": b"\x00\xC0\xE0\x70\x30\x30\x30\x30\x70\x60\x40\x00\x00\x0F\x1F\x3B\x33\x33\x33\x30\x38\x18\x08\x00",
+        "ѕ": b"\x00\xE0\xF0\xB0\xB0\x30\x30\x30\x30\x70\x60\x00\x00\x18\x39\x31\x33\x33\x33\x37\x36\x3E\x1C\x00",
+        "і": b"\x00\x00\x00\x00\x30\xF6\xF6\x00\x00\x00\x00\x00\x00\x00\x00\x30\x30\x3F\x3F\x30\x30\x00\x00\x00",
+        "ї": b"\x00\x00\x00\x04\x34\xF0\xF4\x04\x00\x00\x00\x00\x00\x00\x00\x30\x30\x3F\x3F\x30\x30\x00\x00\x00",
+        "ј": b"\x00\x00\x00\x00\x00\x30\x30\xF6\xF6\x00\x00\x00\x00\x00\x00\x60\xE0\xC0\xC0\xFF\x7F\x00\x00\x00",
+        "љ": b"\x00\x00\xE0\xF0\x30\x30\xF0\xF0\x00\x00\x00\x00\x00\x30\x3F\x1F\x00\x00\x3F\x3F\x33\x33\x1E\x0C",
+        "њ": b"\x00\xF0\xF0\x00\x00\x00\xF0\xF0\x00\x00\x00\x00\x00\x3F\x3F\x03\x03\x03\x3F\x3F\x33\x33\x1E\x0C",
+        "ћ": b"\x00\x30\xFC\xFC\xB0\xB0\xB0\xB0\x80\x80\x00\x00\x00\x00\x3F\x3F\x01\x01\x01\x01\x01\x3F\x3F\x00",
+        "ќ": b"\x00\xF0\xF0\x80\x88\xCC\xE4\x70\x30\x10\x00\x00\x00\x3F\x3F\x03\x03\x07\x0E\x1C\x38\x30\x20\x00",
+        "ѝ": b"\x00\xF0\xF0\x00\x06\x0C\x88\xC0\xE0\xF0\xF0\x00\x00\x3F\x3F\x1C\x0E\x07\x03\x01\x00\x3F\x3F\x00",
+        "ў": b"\x00\x30\xF0\xC0\x04\x08\x08\x04\xC0\xF0\x30\x00\x00\x60\xE0\xC3\xE7\x7C\x3C\x0F\x03\x00\x00\x00",
+        "џ": b"\x00\xF0\xF0\x00\x00\x00\x00\x00\x00\xF0\xF0\x00\x00\x3F\x3F\x30\x30\xF0\xF0\x30\x30\x3F\x3F\x00",
+    }
+    return font
+
+
+def get_small_font_map_ascii_basic() -> Dict[str, bytes]:
+    font = {
+        # U+0000..U+007F Basic Latin
+        " ": b"\x00\x00\x00\x00\x00\x00",
+        "!": b"\x00\x00\x4f\x00\x00\x00",
+        '"': b"\x00\x07\x00\x07\x00\x00",
+        "#": b"\x14\x7f\x14\x7f\x14\x00",
+        "$": b"\x24\x2a\x7f\x2a\x12\x00",
+        "%": b"\x23\x13\x08\x64\x62\x00",
+        "&": b"\x36\x49\x56\x20\x58\x00",
+        "'": b"\x00\x05\x03\x00\x00\x00",
+        "(": b"\x00\x1c\x22\x41\x00\x00",
+        ")": b"\x00\x41\x22\x1c\x00\x00",
+        "*": b"\x14\x08\x3e\x08\x14\x00",
+        "+": b"\x08\x08\x3e\x08\x08\x00",
+        ",": b"\x00\x50\x30\x00\x00\x00",
+        "-": b"\x08\x08\x08\x08\x08\x00",
+        ".": b"\x00\x60\x60\x00\x00\x00",
+        "/": b"\x20\x10\x08\x04\x02\x00",
+        "0": b"\x3e\x51\x49\x45\x3e\x00",
+        "1": b"\x00\x42\x7f\x40\x00\x00",
+        "2": b"\x42\x61\x51\x49\x46\x00",
+        "3": b"\x21\x41\x45\x4b\x31\x00",
+        "4": b"\x18\x14\x12\x7f\x10\x00",
+        "5": b"\x27\x45\x45\x45\x39\x00",
+        "6": b"\x3c\x4a\x49\x49\x30\x00",
+        "7": b"\x01\x71\x09\x05\x03\x00",
+        "8": b"\x36\x49\x49\x49\x36\x00",
+        "9": b"\x06\x49\x49\x29\x1e\x00",
+        ":": b"\x00\x36\x36\x00\x00\x00",
+        ";": b"\x00\x56\x36\x00\x00\x00",
+        "<": b"\x08\x14\x22\x41\x00\x00",
+        "=": b"\x14\x14\x14\x14\x14\x00",
+        ">": b"\x00\x41\x22\x14\x08\x00",
+        "?": b"\x02\x01\x51\x09\x06\x00",
+        "@": b"\x32\x49\x79\x41\x3e\x00",
+        "A": b"\x7e\x09\x09\x09\x7e\x00",
+        "B": b"\x7f\x49\x49\x49\x36\x00",
+        "C": b"\x3e\x41\x41\x41\x22\x00",
+        "D": b"\x7f\x41\x41\x22\x1c\x00",
+        "E": b"\x7f\x49\x49\x49\x41\x00",
+        "F": b"\x7f\x09\x09\x09\x01\x00",
+        "G": b"\x3e\x41\x41\x49\x7a\x00",
+        "H": b"\x7f\x08\x08\x08\x7f\x00",
+        "I": b"\x00\x41\x7f\x41\x00\x00",
+        "J": b"\x20\x40\x41\x3f\x01\x00",
+        "K": b"\x7f\x08\x14\x22\x41\x00",
+        "L": b"\x7f\x40\x40\x40\x40\x00",
+        "M": b"\x7f\x02\x0c\x02\x7f\x00",
+        "N": b"\x7f\x04\x08\x10\x7f\x00",
+        "O": b"\x3e\x41\x41\x41\x3e\x00",
+        "P": b"\x7f\x09\x09\x09\x06\x00",
+        "Q": b"\x3e\x41\x51\x21\x5e\x00",
+        "R": b"\x7f\x09\x19\x29\x46\x00",
+        "S": b"\x26\x49\x49\x49\x32\x00",
+        "T": b"\x01\x01\x7f\x01\x01\x00",
+        "U": b"\x3f\x40\x40\x40\x3f\x00",
+        "V": b"\x1f\x20\x40\x20\x1f\x00",
+        "W": b"\x3f\x40\x38\x40\x3f\x00",
+        "X": b"\x63\x14\x08\x14\x63\x00",
+        "Y": b"\x07\x08\x70\x08\x07\x00",
+        "Z": b"\x61\x51\x49\x45\x43\x00",
+        "[": b"\x00\x7f\x41\x41\x00\x00",
+        "\\": b"\x02\x04\x08\x10\x20\x00",
+        "]": b"\x00\x41\x41\x7f\x00\x00",
+        "^": b"\x04\x02\x01\x02\x04\x00",
+        "_": b"\x40\x40\x40\x40\x40\x00",
+        "`": b"\x00\x03\x05\x00\x00\x00",
+        "a": b"\x20\x54\x54\x54\x78\x00",
+        "b": b"\x7f\x48\x44\x44\x38\x00",
+        "c": b"\x38\x44\x44\x44\x20\x00",
+        "d": b"\x38\x44\x44\x48\x7f\x00",
+        "e": b"\x38\x54\x54\x54\x18\x00",
+        "f": b"\x00\x04\x7e\x05\x01\x00",
+        "g": b"\x08\x54\x54\x54\x3c\x00",
+        "h": b"\x7f\x08\x04\x04\x78\x00",
+        "i": b"\x00\x44\x7d\x40\x00\x00",
+        "j": b"\x20\x40\x44\x3d\x00\x00",
+        "k": b"\x00\x7f\x10\x28\x44\x00",
+        "l": b"\x00\x41\x7f\x40\x00\x00",
+        "m": b"\x7c\x04\x78\x04\x78\x00",
+        "n": b"\x7c\x08\x04\x04\x78\x00",
+        "o": b"\x38\x44\x44\x44\x38\x00",
+        "p": b"\x7c\x14\x14\x14\x08\x00",
+        "q": b"\x08\x14\x14\x14\x7c\x00",
+        "r": b"\x7c\x08\x04\x04\x08\x00",
+        "s": b"\x48\x54\x54\x54\x24\x00",
+        "t": b"\x04\x3e\x44\x40\x20\x00",
+        "u": b"\x3c\x40\x40\x20\x7c\x00",
+        "v": b"\x0c\x30\x40\x30\x0c\x00",
+        "w": b"\x3c\x40\x30\x40\x3c\x00",
+        "x": b"\x44\x24\x38\x48\x44\x00",
+        "y": b"\x44\x48\x30\x10\x0c\x00",
+        "z": b"\x44\x64\x54\x4c\x44\x00",
+        "{": b"\x08\x36\x41\x00\x00\x00",
+        "|": b"\x00\x00\x77\x00\x00\x00",
+        "}": b"\x00\x00\x41\x36\x08\x00",
+        "~": b"\x02\x01\x02\x04\x02\x00",
+    }
+    return font
+
+
+def get_small_font_map_latin_extended() -> Dict[str, bytes]:
+    font = {
+        # U+0080..U+00FF Latin-1 Supplement
+        "¡": b"\x00\x00\x79\x00\x00\x00",
+        "¢": b"\x1c\x22\x7f\x22\x10\x00",
+        "£": b"\x50\x7e\x51\x41\x42\x00",
+        "¤": b"\x22\x1c\x14\x1c\x22\x00",
+        "¥": b"\x15\x16\x7c\x16\x15\x00",
+        "¦": b"\x00\x00\x77\x00\x00\x00",
+        "§": b"\x4a\x55\x55\x55\x29\x00",
+        "¨": b"\x00\x01\x00\x01\x00\x00",
+        "©": b"\x00\x18\x24\x24\x00\x00",
+        "«": b"\x08\x14\x00\x08\x14\x00",
+        "¬": b"\x08\x08\x08\x08\x38\x00",
+        "­": b"\x08\x08\x08\x08\x08\x00",
+        "¯": b"\x00\x01\x01\x01\x00\x00",
+        "°": b"\x00\x00\x07\x05\x07\x00",
+        "±": b"\x44\x44\x5f\x44\x44\x00",
+        "²": b"\x1d\x15\x17\x00\x00\x00",
+        "³": b"\x15\x15\x1f\x00\x00\x00",
+        "´": b"\x00\x04\x02\x01\x00\x00",
+        "µ": b"\x7c\x10\x10\x0c\x10\x00",
+        "¶": b"\x02\x07\x7f\x01\x7f\x00",
+        "·": b"\x00\x00\x08\x00\x00\x00",
+        "¸": b"\x00\x40\x60\x00\x00\x00",
+        "¹": b"\x12\x1f\x10\x00\x00\x00",
+        "º": b"\x07\x05\x07\x00\x00\x00",
+        "»": b"\x14\x08\x00\x14\x08\x00",
+        "¼": b"\x21\x17\x38\x24\x72\x00",
+        "½": b"\x21\x17\x78\x54\x5e\x00",
+        "¿": b"\x30\x48\x45\x40\x20\x00",
+        "À": b"\x78\x15\x16\x14\x78\x00",
+        "Á": b"\x78\x14\x16\x15\x78\x00",
+        "Â": b"\x78\x16\x15\x16\x78\x00",
+        "Ã": b"\x7a\x29\x2a\x79\x00\x00",
+        "Ä": b"\x78\x15\x14\x15\x78\x00",
+        "Å": b"\x78\x14\x15\x14\x78\x00",
+        "Æ": b"\x7e\x09\x7f\x49\x49\x00",
+        "Ç": b"\x0e\x51\x71\x11\x08\x00",
+        "È": b"\x7c\x55\x56\x44\x44\x00",
+        "É": b"\x7c\x54\x56\x45\x44\x00",
+        "Ê": b"\x7c\x56\x55\x46\x44\x00",
+        "Ë": b"\x7c\x55\x54\x45\x44\x00",
+        "Ì": b"\x00\x49\x7a\x48\x00\x00",
+        "Í": b"\x00\x48\x7a\x49\x00\x00",
+        "Î": b"\x00\x4a\x79\x4a\x00\x00",
+        "Ï": b"\x44\x45\x7c\x45\x44\x00",
+        "Ð": b"\x08\x7f\x49\x22\x1c\x00",
+        "Ñ": b"\x7a\x11\x22\x79\x00\x00",
+        "Ò": b"\x38\x45\x46\x44\x38\x00",
+        "Ó": b"\x38\x44\x46\x45\x38\x00",
+        "Ô": b"\x38\x46\x45\x46\x38\x00",
+        "Õ": b"\x32\x49\x4a\x31\x00\x00",
+        "Ö": b"\x38\x45\x44\x45\x38\x00",
+        "×": b"\x22\x14\x08\x14\x22\x00",
+        "Ø": b"\x58\x24\x54\x48\x34\x00",
+        "Ù": b"\x38\x41\x42\x40\x38\x00",
+        "Ú": b"\x38\x40\x42\x41\x38\x00",
+        "Û": b"\x38\x42\x41\x42\x38\x00",
+        "Ü": b"\x3c\x41\x40\x41\x3c\x00",
+        "Ý": b"\x04\x08\x72\x09\x04\x00",
+        "Þ": b"\x7f\x22\x22\x22\x1c\x00",
+        "ß": b"\x7e\x11\x25\x25\x1a\x00",
+        "à": b"\x20\x55\x56\x54\x78\x00",
+        "á": b"\x20\x54\x56\x55\x78\x00",
+        "â": b"\x20\x56\x55\x56\x78\x00",
+        "ã": b"\x22\x55\x56\x55\x78\x00",
+        "ä": b"\x20\x55\x54\x55\x78\x00",
+        "å": b"\x20\x54\x55\x54\x78\x00",
+        "æ": b"\x24\x54\x7c\x54\x48\x00",
+        "ç": b"\x1c\x22\x62\x22\x10\x00",
+        "è": b"\x38\x55\x56\x54\x08\x00",
+        "é": b"\x38\x54\x56\x55\x08\x00",
+        "ê": b"\x38\x56\x55\x56\x08\x00",
+        "ë": b"\x38\x55\x54\x55\x08\x00",
+        "ì": b"\x00\x45\x7e\x40\x00\x00",
+        "í": b"\x00\x44\x7e\x41\x00\x00",
+        "î": b"\x00\x46\x7d\x42\x00\x00",
+        "ï": b"\x00\x45\x7c\x41\x00\x00",
+        "ñ": b"\x78\x12\x09\x0a\x71\x00",
+        "ò": b"\x38\x45\x46\x44\x38\x00",
+        "ó": b"\x38\x44\x46\x45\x38\x00",
+        "ô": b"\x38\x46\x45\x46\x38\x00",
+        "õ": b"\x32\x49\x4a\x31\x00\x00",
+        "ö": b"\x38\x45\x44\x45\x38\x00",
+        "÷": b"\x08\x08\x2a\x08\x08\x00",
+        "ø": b"\x58\x24\x54\x48\x34\x00",
+        "ù": b"\x3c\x41\x42\x20\x7c\x00",
+        "ú": b"\x3c\x40\x42\x21\x7c\x00",
+        "û": b"\x3c\x42\x41\x22\x7c\x00",
+        "ü": b"\x3c\x41\x40\x21\x5c\x00",
+        "ű": b"\x3c\x41\x40\x21\x5c\x00",
+        "ų": b"\x3C\x40\x40\x20\xDC\x80",
+        "ý": b"\x44\x48\x32\x11\x0c\x00",
+        "þ": b"\x7c\x28\x28\x10\x00\x00",
+        "ÿ": b"\x44\x49\x30\x11\x0c\x00",
+        # U+0100..U+017F Latin Extended A
+        "Ā": b"\x78\x15\x15\x15\x78\x00",
+        "ā": b"\x20\x55\x55\x55\x78\x00",
+        "Ă": b"\x78\x15\x16\x15\x78\x00",
+        "ă": b"\x20\x55\x56\x55\x78\x00",
+        "Ą": b"\x7e\x09\x09\x49\xbe\x00",
+        "ą": b"\x20\x54\x54\xd4\x78\x00",
+        "Ć": b"\x38\x44\x46\x45\x28\x00",
+        "ć": b"\x38\x44\x46\x45\x20\x00",
+        "Ĉ": b"\x38\x46\x45\x46\x28\x00",
+        "ĉ": b"\x38\x46\x45\x46\x20\x00",
+        "Ċ": b"\x38\x44\x45\x44\x28\x00",
+        "ċ": b"\x38\x44\x45\x44\x20\x00",
+        "Č": b"\x38\x45\x46\x45\x28\x00",
+        "č": b"\x38\x45\x46\x45\x20\x00",
+        "Ď": b"\x7c\x45\x46\x29\x10\x00",
+        "ď": b"\x38\x44\x44\x4A\x7F\x00",
+        "Đ": b"\x08\x7f\x49\x22\x1c\x00",
+        "đ": b"\x38\x44\x44\x4A\x7F\x00",
+        "Ē": b"\x7c\x55\x55\x55\x44\x00",
+        "ē": b"\x38\x55\x55\x55\x08\x00",
+        "Ĕ": b"\x7c\x55\x56\x55\x44\x00",
+        "ĕ": b"\x38\x55\x56\x55\x08\x00",
+        "Ė": b"\x7c\x54\x55\x54\x44\x00",
+        "ė": b"\x38\x54\x55\x54\x08\x00",
+        "Ę": b"\x7f\x49\x49\xc9\x41\x00",
+        "ę": b"\x38\x54\x54\xd4\x18\x00",
+        "Ě": b"\x7c\x55\x56\x55\x44\x00",
+        "ě": b"\x38\x55\x56\x55\x08\x00",
+        "Ĝ": b"\x38\x46\x55\x56\x70\x00",
+        "ĝ": b"\x08\x56\x55\x56\x3c\x00",
+        "Ğ": b"\x38\x45\x56\x55\x30\x00",
+        "ğ": b"\x08\x55\x56\x55\x3c\x00",
+        "Ġ": b"\x38\x44\x55\x54\x30\x00",
+        "ġ": b"\x08\x54\x55\x54\x3c\x00",
+        "Ģ": b"\x0e\x51\x35\x15\x1c\x00",
+        "Ĥ": b"\x7c\x12\x11\x12\x7c\x00",
+        "ĥ": b"\x02\x79\x22\x10\x60\x00",
+        "Ħ": b"\x02\x7f\x0a\x7f\x02\x00",
+        "ħ": b"\x02\x7f\x12\x08\x70\x00",
+        "Ĩ": b"\x4a\x49\x7a\x49\x48\x00",
+        "ĩ": b"\x02\x49\x7a\x41\x00\x00",
+        "Ī": b"\x44\x45\x7d\x45\x44\x00",
+        "ī": b"\x00\x45\x7d\x41\x00\x00",
+        "Ĭ": b"\x44\x45\x7e\x45\x44\x00",
+        "ĭ": b"\x00\x45\x7e\x41\x00\x00",
+        "Į": b"\x00\x41\x7f\xc1\x00\x00",
+        "į": b"\x00\x44\x7d\xc0\x00\x00",
+        "İ": b"\x44\x44\x7d\x44\x44\x00",
+        "ı": b"\x00\x44\x7c\x40\x00\x00",
+        "ij": b"\x44\x7d\x40\x44\x3d\x00",
+        "Ĵ": b"\x20\x40\x46\x3d\x06\x00",
+        "ĵ": b"\x00\x20\x46\x3d\x02\x00",
+        "Ķ": b"\x1f\x44\x2a\x11\x00\x00",
+        "ķ": b"\x1f\x44\x2a\x11\x00\x00",
+        "ĸ": b"\x7c\x10\x28\x44\x00\x00",
+        "Ĺ": b"\x7c\x40\x42\x41\x40\x00",
+        "Ľ": b"\x7c\x40\x42\x41\x40\x00",
+        "ĺ": b"\x00\x44\x7e\x41\x00\x00",
+        "Ļ": b"\x1f\x50\x30\x10\x10\x00",
+        "ļ": b"\x00\x51\x3f\x10\x00\x00",
+        "ľ": b"\x00\x41\x7f\x40\x03\x00",
+        "Ŀ": b"\x7f\x40\x40\x48\x40\x00",
+        "ŀ": b"\x00\x41\x7f\x40\x08\x00",
+        "Ł": b"\x10\x7F\x48\x44\x40\x00",
+        "ł": b"\x00\x49\x7F\x44\x00\x00",
+        "Ń": b"\x7c\x08\x12\x21\x7c\x00",
+        "ń": b"\x7c\x08\x06\x05\x78\x00",
+        "Ņ": b"\x1f\x42\x24\x08\x1f\x00",
+        "ņ": b"\x1f\x42\x21\x01\x1e\x00",
+        "Ň": b"\x7c\x09\x12\x21\x7c\x00",
+        "ň": b"\x7c\x09\x06\x05\x78\x00",
+        "Ō": b"\x38\x45\x45\x45\x38\x00",
+        "ō": b"\x38\x45\x45\x45\x38\x00",
+        "Ŏ": b"\x38\x45\x46\x45\x38\x00",
+        "ŏ": b"\x38\x45\x46\x45\x38\x00",
+        "ő": b"\x38\x45\x44\x45\x38\x00",
+        "Œ": b"\x3e\x41\x7f\x49\x49\x00",
+        "œ": b"\x38\x44\x7c\x54\x58\x00",
+        "Ŕ": b"\x7c\x14\x16\x15\x68\x00",
+        "ŕ": b"\x7c\x08\x06\x05\x08\x00",
+        "Ŗ": b"\x1f\x45\x25\x05\x1a\x00",
+        "ŗ": b"\x1f\x42\x21\x01\x02\x00",
+        "Ř": b"\x7c\x15\x16\x15\x68\x00",
+        "ř": b"\x7c\x09\x06\x05\x08\x00",
+        "Ś": b"\x08\x54\x56\x55\x20\x00",
+        "ś": b"\x48\x54\x56\x55\x24\x00",
+        "Ŝ": b"\x08\x56\x55\x56\x20\x00",
+        "ŝ": b"\x48\x56\x55\x56\x24\x00",
+        "Ş": b"\x02\x55\x35\x15\x08\x00",
+        "ş": b"\x12\x55\x35\x15\x09\x00",
+        "Š": b"\x08\x55\x56\x55\x20\x00",
+        "š": b"\x48\x55\x56\x55\x24\x00",
+        "Ţ": b"\x01\x41\x3f\x01\x01\x00",
+        "ţ": b"\x02\x4f\x32\x10\x08\x00",
+        "Ť": b"\x04\x05\x7e\x05\x04\x00",
+        "ť": b"\x04\x3e\x44\x40\x23\x00",
+        "Ŧ": b"\x01\x09\x7f\x09\x01\x00",
+        "ŧ": b"\x14\x3e\x54\x40\x20\x00",
+        "Ū": b"\x3c\x41\x41\x41\x3c\x00",
+        "ū": b"\x3c\x41\x41\x21\x7c\x00",
+        "Ŭ": b"\x3c\x41\x42\x41\x3c\x00",
+        "ŭ": b"\x3c\x41\x41\x21\x7c\x00",
+        "Ů": b"\x3c\x40\x41\x40\x3c\x00",
+        "ů": b"\x3c\x41\x41\x21\x7c\x00",
+        "Ŵ": b"\x3c\x42\x39\x42\x3c\x00",
+        "ŵ": b"\x3c\x42\x31\x42\x3c\x00",
+        "Ŷ": b"\x04\x0a\x71\x0a\x04\x00",
+        "ŷ": b"\x04\x4a\x31\x12\x0c\x00",
+        "Ÿ": b"\x04\x09\x70\x09\x04\x00",
+        "Ź": b"\x44\x64\x56\x4d\x44\x00",
+        "ź": b"\x44\x64\x56\x4d\x44\x00",
+        "Ż": b"\x44\x64\x55\x4c\x44\x00",
+        "ż": b"\x44\x64\x55\x4c\x44\x00",
+        "Ž": b"\x44\x65\x56\x4d\x44\x00",
+        "ž": b"\x44\x65\x56\x4d\x44\x00",
+        "ſ": b"\x00\x04\x7e\x01\x01\x00",
+    }
+    return font
+
+
+def get_small_font_map_cyrillic() -> Dict[str, bytes]:
+    font = {
+        # U+0400..U+04FF Cyrillic
+        "Ѐ": b"\x7c\x55\x56\x44\x44\x00",
+        "Ё": b"\x7c\x55\x54\x45\x44\x00",
+        "Ђ": b"\x01\x7f\x09\x49\x31\x00",
+        "Ѓ": b"\x7c\x04\x06\x05\x04\x00",
+        "Є": b"\x3e\x49\x49\x41\x00\x00",
+        "Ѕ": b"\x06\x49\x49\x49\x30\x00",
+        "І": b"\x41\x41\x7f\x41\x41\x00",
+        "Ї": b"\x44\x45\x7c\x45\x44\x00",
+        "Ј": b"\x20\x40\x41\x3f\x01\x00",
+        "Љ": b"\x7f\x01\x7f\x48\x30\x00",
+        "Њ": b"\x7f\x08\x7f\x48\x30\x00",
+        "Ћ": b"\x01\x01\x7f\x09\x71\x00",
+        "Ќ": b"\x7c\x12\x29\x44\x00\x00",
+        "Ѝ": b"\x7c\x21\x12\x08\x7c\x00",
+        "Ў": b"\x44\x49\x32\x09\x04\x00",
+        "Џ": b"\x3f\x20\x60\x20\x3f\x00",
+        "А": b"\x7e\x09\x09\x09\x7e\x00",
+        "Б": b"\x7f\x49\x49\x49\x31\x00",
+        "В": b"\x7f\x49\x49\x49\x36\x00",
+        "Г": b"\x7f\x01\x01\x01\x01\x00",
+        "Ґ": b"\x7E\x02\x02\x02\x03\x00",
+        "Д": b"\x60\x3f\x21\x3f\x60\x00",
+        "Е": b"\x7f\x49\x49\x49\x41\x00",
+        "Ж": b"\x77\x08\x7f\x08\x77\x00",
+        "З": b"\x00\x41\x49\x49\x36\x00",
+        "И": b"\x7f\x10\x08\x04\x7f\x00",
+        "Й": b"\x7c\x21\x12\x09\x7c\x00",
+        "К": b"\x7f\x08\x14\x22\x41\x00",
+        "Л": b"\x40\x3f\x01\x01\x7f\x00",
+        "М": b"\x7f\x02\x04\x02\x7f\x00",
+        "Н": b"\x7f\x08\x08\x08\x7f\x00",
+        "О": b"\x3e\x41\x41\x41\x3e\x00",
+        "П": b"\x7f\x01\x01\x01\x7f\x00",
+        "Р": b"\x7f\x09\x09\x09\x06\x00",
+        "С": b"\x3e\x41\x41\x41\x22\x00",
+        "Т": b"\x01\x01\x7f\x01\x01\x00",
+        "У": b"\x47\x48\x30\x08\x07\x00",
+        "Ф": b"\x0c\x12\x7f\x12\x0c\x00",
+        "Х": b"\x63\x14\x08\x14\x63\x00",
+        "Ц": b"\x3f\x20\x20\x3f\x60\x00",
+        "Ч": b"\x07\x08\x08\x08\x7f\x00",
+        "Ш": b"\x7F\x40\x7F\x40\x7F\x00",
+        "Щ": b"\x7F\x40\x7F\x40\x7F\xC0",
+        "Ъ": b"\x01\x7f\x48\x48\x30\x00",
+        "Ы": b"\x7f\x48\x30\x00\x7f\x00",
+        "Ь": b"\x00\x7f\x48\x48\x30\x00",
+        "Э": b"\x22\x49\x49\x2a\x1c\x00",
+        "Ю": b"\x7f\x08\x3e\x41\x3e\x00",
+        "Я": b"\x46\x29\x19\x09\x7f\x00",
+        "а": b"\x20\x54\x54\x54\x78\x00",
+        "б": b"\x3c\x4a\x4a\x4a\x30\x00",
+        "в": b"\x7c\x54\x54\x54\x28\x00",
+        "г": b"\x7c\x04\x04\x04\x04\x00",
+        "ґ": b"\x7C\x04\x04\x04\x06\x00",
+        "д": b"\x40\x3c\x24\x3c\x60\x00",
+        "е": b"\x38\x54\x54\x54\x18\x00",
+        "ж": b"\x6c\x10\x7c\x10\x6c\x00",
+        "з": b"\x28\x44\x54\x54\x28\x00",
+        "и": b"\x7c\x20\x10\x08\x7c\x00",
+        "й": b"\x7c\x21\x12\x09\x7c\x00",
+        "к": b"\x7c\x10\x28\x44\x00\x00",
+        "л": b"\x40\x3c\x04\x04\x7c\x00",
+        "м": b"\x7c\x08\x10\x08\x7c\x00",
+        "н": b"\x7c\x10\x10\x10\x7c\x00",
+        "о": b"\x38\x44\x44\x44\x38\x00",
+        "п": b"\x7c\x04\x04\x04\x7c\x00",
+        "р": b"\x7c\x14\x14\x14\x08\x00",
+        "с": b"\x38\x44\x44\x44\x20\x00",
+        "т": b"\x04\x04\x7c\x04\x04\x00",
+        "у": b"\x4c\x50\x20\x10\x0c\x00",
+        "ф": b"\x18\x24\x7e\x24\x18\x00",
+        "х": b"\x44\x28\x10\x28\x44\x00",
+        "ц": b"\x3c\x20\x20\x3c\x60\x00",
+        "ч": b"\x0c\x10\x10\x10\x7c\x00",
+        "ш": b"\x7C\x40\x7C\x40\x7C\x00",
+        "щ": b"\x7C\x40\x7C\x40\xFC\x00",
+        "ъ": b"\x04\x7c\x50\x20\x00\x00",
+        "ы": b"\x7c\x50\x20\x00\x7c\x00",
+        "ь": b"\x00\x7c\x50\x20\x00\x00",
+        "э": b"\x28\x44\x54\x54\x28\x00",
+        "ю": b"\x7c\x10\x38\x44\x38\x00",
+        "я": b"\x48\x34\x14\x14\x7c\x00",
+        "ѐ": b"\x38\x55\x56\x54\x08\x00",
+        "ё": b"\x38\x55\x54\x55\x08\x00",
+        "ђ": b"\x02\x3f\x12\x48\x30\x00",
+        "ѓ": b"\x7c\x04\x06\x05\x04\x00",
+        "є": b"\x38\x54\x54\x44\x28\x00",
+        "ѕ": b"\x08\x54\x54\x54\x20\x00",
+        "і": b"\x00\x44\x7d\x40\x00\x00",
+        "ї": b"\x00\x45\x7c\x41\x00\x00",
+        "ј": b"\x20\x40\x44\x3d\x00\x00",
+        "љ": b"\x7c\x04\x7c\x50\x20\x00",
+        "њ": b"\x7c\x10\x7c\x50\x20\x00",
+        "ћ": b"\x04\x7e\x14\x10\x60\x00",
+        "ќ": b"\x7c\x12\x29\x44\x00\x00",
+        "ѝ": b"\x7c\x21\x12\x08\x7c\x00",
+        "ў": b"\x4c\x51\x22\x11\x0c\x00",
+        "џ": b"\x3c\x20\x60\x20\x3c\x00",
+    }
+    return font
+
+
+NAME_ASCII_BASIC: Final = "ascii_basic"
+NAME_LATIN_EXTENDED: Final = "latin_extended"
+NAME_CYRILLIC: Final = "cyrillic"
+NAME_CJK: Final = "cjk"
+
+
+def get_font_maps_for_name(
+    font_name: str,
+) -> Tuple[Dict[str, bytes], Dict[str, bytes]]:
+    if font_name == NAME_ASCII_BASIC:
+        return get_font_map_ascii_basic(), get_small_font_map_ascii_basic()
+    elif font_name == NAME_LATIN_EXTENDED:
+        return get_font_map_latin_extended(), get_small_font_map_latin_extended()
+    elif font_name == NAME_CYRILLIC:
+        return get_font_map_cyrillic(), get_small_font_map_cyrillic()
+    else:
+        raise ValueError("Invalid font name")

Translations/make_translation_test.py

@@ -0,0 +1,54 @@
+#!/usr/bin/env python3
+import json
+import os
+import unittest
+
+
+class TestMakeTranslation(unittest.TestCase):
+    def test_get_bytes_from_font_index(self):
+        from make_translation import get_bytes_from_font_index
+
+        self.assertEqual(get_bytes_from_font_index(2), b"\x02")
+        self.assertEqual(get_bytes_from_font_index(239), b"\xEF")
+        self.assertEqual(get_bytes_from_font_index(240), b"\xF0")
+        self.assertEqual(get_bytes_from_font_index(241), b"\xF1\x01")
+        self.assertEqual(get_bytes_from_font_index(495), b"\xF1\xFF")
+        self.assertEqual(get_bytes_from_font_index(496), b"\xF2\x01")
+        self.assertEqual(get_bytes_from_font_index(750), b"\xF2\xFF")
+        self.assertEqual(get_bytes_from_font_index(751), b"\xF3\x01")
+        self.assertEqual(get_bytes_from_font_index(0x10 * 0xFF - 15), b"\xFF\xFF")
+        with self.assertRaises(ValueError):
+            get_bytes_from_font_index(0x10 * 0xFF - 14)
+
+    def test_bytes_to_escaped(self):
+        from make_translation import bytes_to_escaped
+
+        self.assertEqual(bytes_to_escaped(b"\x00"), "\\x00")
+        self.assertEqual(bytes_to_escaped(b"\xF1\xAB"), "\\xF1\\xAB")
+
+    def test_bytes_to_c_hex(self):
+        from make_translation import bytes_to_c_hex
+
+        self.assertEqual(bytes_to_c_hex(b"\x00"), "0x00,")
+        self.assertEqual(bytes_to_c_hex(b"\xF1\xAB"), "0xF1, 0xAB,")
+
+    def test_no_language_id_collisions(self):
+        """
+        Asserting that we have no language collisions and that the has works ok
+        """
+        from make_translation import get_language_unqiue_id
+
+        seen_ids = []
+        for filename in os.listdir("."):
+            if filename.endswith(".json") and filename.startswith("translation_"):
+                with open(filename) as f:
+                    data = json.loads(f.read())
+                    lang_code = data.get("languageCode")
+                    self.assertNotEqual(lang_code, None)
+                    id = get_language_unqiue_id(lang_code)
+                    self.assertFalse(id in seen_ids)
+                    seen_ids.append(id)
+
+
+if __name__ == "__main__":
+    unittest.main()

Translations/objcopy.py

@@ -0,0 +1,25 @@
+import os
+import subprocess
+import tempfile
+
+
+if "OBJCOPY" in os.environ:
+    OBJCOPY = os.environ["OBJCOPY"]
+else:
+    OBJCOPY = "objcopy"
+
+
+def get_binary_from_obj(objfile_path: str, section_name: str) -> bytes:
+    tmpfd, tmpfile = tempfile.mkstemp()
+    result = subprocess.run(
+        [OBJCOPY, "-O", "binary", "-j", section_name, objfile_path, tmpfile]
+    )
+    result.check_returncode()
+    with open(tmpfd, "rb") as f:
+        bin: bytes = f.read()
+    os.remove(tmpfile)
+    return bin
+
+
+def cpp_var_to_section_name(var_name: str) -> str:
+    return f".rodata._ZL{len(var_name)}{var_name}"

Translations/translation_BG.json

@@ -0,0 +1,214 @@
+{
+  "languageCode": "BG",
+  "languageLocalName": "Български",
+  "fonts": ["ascii_basic", "cyrillic"],
+  "messages": {
+    "SettingsCalibrationDone": "Калибрацията завършена!",
+    "SettingsCalibrationWarning": "Уверете се, че върха на поялника е със стайна температура преди да продължите!",
+    "SettingsResetWarning": "Сигурни ли сте, че искате да върнете фабричните настройки?",
+    "UVLOWarningString": "Ниско DC Напрежение",
+    "UndervoltageString": "Ниско Напрежение",
+    "InputVoltageString": "Входно V: ",
+    "WarningTipTempString": "Темп.: ",
+    "BadTipString": "ЛОШ ВРЪХ",
+    "SleepingSimpleString": "Сън",
+    "SleepingAdvancedString": "Хър Хър Хър...",
+    "WarningSimpleString": "ОХ!",
+    "WarningAdvancedString": "ВНИМАНИЕ! ТОПЛО!",
+    "SleepingTipAdvancedString": "Връх:",
+    "IdleTipString": "Връх:",
+    "IdleSetString": " Настройка:",
+    "TipDisconnectedString": "ПРЕКЪСНАТ ВРЪХ",
+    "SolderingAdvancedPowerPrompt": "Захранване: ",
+    "OffString": "Изкл.",
+    "YourGainMessage": "Усилване:"
+  },
+  "messagesWarn": {
+    "ResetOKMessage": "Нулиране",
+    "SettingsResetMessage": ["Настройките бяха", "нулирани!"],
+    "NoAccelerometerMessage": ["No accelerometer", "detected!"],
+    "NoPowerDeliveryMessage": ["No USB-PD IC", "detected!"],
+    "LockingKeysString": " LOCKED",
+    "UnlockingKeysString": "UNLOCKED",
+    "WarningKeysLockedString": "!LOCKED!",
+    "WarningThermalRunaway": ["Thermal", "Runaway"]
+  },
+  "characters": {
+    "SettingRightChar": "R",
+    "SettingLeftChar": "L",
+    "SettingAutoChar": "A",
+    "SettingOffChar": "O",
+    "SettingSlowChar": "S",
+    "SettingMediumChar": "M",
+    "SettingFastChar": "F",
+    "SettingStartNoneChar": "И",
+    "SettingStartSolderingChar": "Р",
+    "SettingStartSleepChar": "С",
+    "SettingStartSleepOffChar": "П",
+    "SettingStartNoneChar": "F",
+    "SettingSensitivityOff": "O",
+    "SettingSensitivityLow": "L",
+    "SettingSensitivityMedium": "M",
+    "SettingSensitivityHigh": "H",
+    "SettingLockDisableChar": "D",
+    "SettingLockBoostChar": "B",
+    "SettingLockFullChar": "F",
+    "SettingNAChar": "N/A"
+  },
+  "menuGroups": {
+    "PowerMenu": {
+      "text2": ["Power", "settings"],
+      "desc": "Power settings"
+    },
+    "SolderingMenu": {
+      "text2": ["Поялник", "Настройки"],
+      "desc": "Настройки на поялника"
+    },
+    "PowerSavingMenu": {
+      "text2": ["Режими", "Настройки"],
+      "desc": "Настройки енергоспестяване"
+    },
+    "UIMenu": {
+      "text2": ["Интерфейс", "Настройки"],
+      "desc": "Настройки на интерфейса"
+    },
+    "AdvancedMenu": {
+      "text2": ["Разширени", "Настройки"],
+      "desc": "Допълнителни настройки"
+    }
+  },
+  "menuOptions": {
+    "DCInCutoff": {
+      "text2": ["Източник", "захранване"],
+      "desc": "Източник на захранване. Минимално напрежение. (DC 10V) (S 3,3V за клетка)"
+    },
+    "SleepTemperature": {
+      "text2": ["Темп.", "сън"],
+      "desc": "Температура при режим \"сън\" (C)"
+    },
+    "SleepTimeout": {
+      "text2": ["Време", "сън"],
+      "desc": "Включване в режим \"сън\" след: (Минути | Секунди)"
+    },
+    "ShutdownTimeout": {
+      "text2": ["Време", "изкл."],
+      "desc": "Изключване след (Минути)"
+    },
+    "MotionSensitivity": {
+      "text2": ["Усещане", "за движение"],
+      "desc": "Усещане за движение (0=Изключено | 1=Слабо | ... | 9=Силно)"
+    },
+    "TemperatureUnit": {
+      "text2": ["Единици за", "температура"],
+      "desc": "Единици за температура (C=Целзии | F=Фаренхайт)"
+    },
+    "AdvancedIdle": {
+      "text2": ["Детайлен", "екран в покой"],
+      "desc": "Покажи детайлна информация със ситен шрифт на екрана в режим на покой."
+    },
+    "DisplayRotation": {
+      "text2": ["Ориентация", "на дисплея"],
+      "desc": "Ориентация на дисплея (R=Дясна Ръка | L=Лява Ръка | A=Автоматично)"
+    },
+    "BoostTemperature": {
+      "text2": ["Турбо", "темп."],
+      "desc": "Температура за \"турбо\" режим"
+    },
+    "AutoStart": {
+      "text2": ["Автоматичен", "работен режим"],
+      "desc": "Режим на поялника при включване на захранването. (И=Изключен | Р=Работен | С=Сън | П=Сън температура помещение)"
+    },
+    "CooldownBlink": {
+      "text2": ["Мигай при", "топъл поялник"],
+      "desc": "След изключване от работен режим, индикатора за температура да мига докато човката на поялника все още е топла"
+    },
+    "TemperatureCalibration": {
+      "text2": ["Калибриране", "температура?"],
+      "desc": "Калибриране на температурата"
+    },
+    "SettingsReset": {
+      "text2": ["Фабрични", "настройки?"],
+      "desc": "Връщане на фабрични настройки"
+    },
+    "VoltageCalibration": {
+      "text2": ["Калибриране", "напрежение?"],
+      "desc": "Калибриране на входното напрежение. Задръжте бутонa за изход"
+    },
+    "AdvancedSoldering": {
+      "text2": ["Детайлен", "работен екран"],
+      "desc": "Детайлна информация в работен режим при запояване"
+    },
+    "ScrollingSpeed": {
+      "text2": ["Скорост", "на текста"],
+      "desc": "Скорост на движение на този текст"
+    },
+    "QCMaxVoltage": {
+      "text2": ["Мощност на", "захранване"],
+      "desc": "Мощност на избраното захранване"
+    },
+    "PDNegTimeout": {
+      "text2": ["PD", "timeout"],
+      "desc": "PD negotiation timeout in 100ms steps for compatibility with some QC chargers (0: disabled)"
+    },
+    "PowerLimit": {
+      "text2": ["Лимит на", "мощност"],
+      "desc": "Максимална мощност на поялника (Watt)"
+    },
+    "ReverseButtonTempChange": {
+      "text2": ["Размяна", "бутони +-?"],
+      "desc": "Обръщане на бутоните \"+\" и \"-\" за промяна на температурата на върха на поялника"
+    },
+    "TempChangeShortStep": {
+      "text2": ["Промяна T", "бързо?"],
+      "desc": "Промяна на температура при бързо натискане на бутон!"
+    },
+    "TempChangeLongStep": {
+      "text2": ["Промяна Т", "задържане?"],
+      "desc": "Промяна на температура при задържане на бутон!"
+    },
+    "PowerPulsePower": {
+      "text2": ["Захранващ", "импулс"],
+      "desc": "Поддържане на интензивност на захранващия импулс"
+    },
+    "HallEffSensitivity": {
+      "text2": ["Hall Eff", "Sensitivity"],
+      "desc": "Sensitivity of the Hall effect sensor in detecting sleep (O=Off | L=Low | M=Medium | H=High)"
+    },
+    "LockingMode": {
+      "text2": ["Allow buttons", "locking"],
+      "desc": "When soldering, long press on both buttons lock them (D=Disable | B=Boost only | F=Full locking)"
+    },
+    "MinVolCell": {
+      "text2": ["Minimum", "voltage"],
+      "desc": "Minimum allowed voltage per cell (3S: 3 - 3,7V | 4-6S: 2,4 - 3,7V)"
+    },
+    "AnimLoop": {
+      "text2": ["Anim.", "loop"],
+      "desc": "Loop icon animations in root menu"
+    },
+    "AnimSpeed": {
+      "text2": ["Anim.", "speed"],
+      "desc": "Speed of icon animations in menu (O=off | L=low | M=medium | H=high)"
+    },
+    "PowerPulseWait": {
+      "text2": ["Power pulse", "wait time"],
+      "desc": "Time to wait before triggering every keep-awake pulse (x 2,5с)"
+    },
+    "PowerPulseDuration": {
+      "text2": ["Power pulse", "duration"],
+      "desc": "Keep-awake-pulse duration (x 250мс)"
+    },
+    "LanguageSwitch": {
+      "text2": ["Език:", " BG   Български"],
+      "desc": ""
+    },
+    "Brightness": {
+      "text2": ["Screen", "Brightness"],
+      "desc": "Adjust the contrast/brightness of the OLED screen"
+    },
+    "ColourInversion": {
+      "text2": ["Screen", "Invert"],
+      "desc": "Invert the colours of the OLED screen"
+    }
+  }
+}

Translations/translation_CS.json

@@ -0,0 +1,213 @@
+{
+  "languageCode": "CS",
+  "languageLocalName": "Český",
+  "fonts": ["ascii_basic", "latin_extended"],
+  "messages": {
+    "SettingsCalibrationDone": "Kalibrace dokončena!",
+    "SettingsCalibrationWarning": "Ujistěte se, že hrot má pokojovou teplotu!",
+    "SettingsResetWarning": "Opravdu chcete resetovat zařízení do továrního nastavení?",
+    "UVLOWarningString": "Nízké DC",
+    "UndervoltageString": "! Nízké napětí !",
+    "InputVoltageString": "Napětí: ",
+    "WarningTipTempString": "Teplota: ",
+    "BadTipString": "ŠP. HROT",
+    "SleepingSimpleString": "Zzz ",
+    "SleepingAdvancedString": "Režim spánku...",
+    "WarningSimpleString": "PÁLÍ",
+    "WarningAdvancedString": "!! HORKÝ HROT !!",
+    "SleepingTipAdvancedString": "Hrot:",
+    "IdleTipString": "Hrot:",
+    "IdleSetString": " Cíl:",
+    "TipDisconnectedString": "HROT NEPŘIPOJEN",
+    "SolderingAdvancedPowerPrompt": "Ohřev: ",
+    "OffString": "Vyp",
+    "YourGainMessage": "Zisk:"
+  },
+  "messagesWarn": {
+    "ResetOKMessage": "Reset OK",
+    "SettingsResetMessage": ["Tov. nas. obnov.", ""],
+    "NoAccelerometerMessage": ["No accelerometer", "detected!"],
+    "NoPowerDeliveryMessage": ["No USB-PD IC", "detected!"],
+    "LockingKeysString": " LOCKED",
+    "UnlockingKeysString": "UNLOCKED",
+    "WarningKeysLockedString": "!LOCKED!",
+    "WarningThermalRunaway": ["Thermal", "Runaway"]
+  },
+  "characters": {
+    "SettingRightChar": "P",
+    "SettingLeftChar": "L",
+    "SettingAutoChar": "A",
+    "SettingOffChar": "O",
+    "SettingSlowChar": "P",
+    "SettingMediumChar": "M",
+    "SettingFastChar": "R",
+    "SettingStartNoneChar": "O",
+    "SettingStartSolderingChar": "P",
+    "SettingStartSleepChar": "S",
+    "SettingStartSleepOffChar": "M",
+    "SettingSensitivityOff": "O",
+    "SettingSensitivityLow": "L",
+    "SettingSensitivityMedium": "M",
+    "SettingSensitivityHigh": "H",
+    "SettingLockDisableChar": "D",
+    "SettingLockBoostChar": "B",
+    "SettingLockFullChar": "F",
+    "SettingNAChar": "N/A"
+  },
+  "menuGroups": {
+    "PowerMenu": {
+      "text2": ["Power", "settings"],
+      "desc": "Power settings"
+    },
+    "SolderingMenu": {
+      "text2": ["Pájecí", "nastavení"],
+      "desc": "Nastavení pájení (boost, auto start...)."
+    },
+    "PowerSavingMenu": {
+      "text2": ["Režim", "spánku"],
+      "desc": "Nastavení režimu spánku, automatického vypnutí..."
+    },
+    "UIMenu": {
+      "text2": ["Uživatelské", "rozhraní"],
+      "desc": "Nastavení uživatelského rozhraní."
+    },
+    "AdvancedMenu": {
+      "text2": ["Pokročilé", "volby"],
+      "desc": "Pokročilé volby (detailní obrazovky, kalibrace, tovární nastavení...)."
+    }
+  },
+  "menuOptions": {
+    "DCInCutoff": {
+      "text2": ["Zdroj", "napájení"],
+      "desc": "Při nižším napětí ukončí pájení (DC=10V | ?S=?x3,3V pro LiPo, LiIon...)."
+    },
+    "SleepTemperature": {
+      "text2": ["Teplota v", "r. spánku"],
+      "desc": "Teplota v režimu spánku."
+    },
+    "SleepTimeout": {
+      "text2": ["Čas do", "r. spánku"],
+      "desc": "Čas do režimu spánku (Minut | Sekund)."
+    },
+    "ShutdownTimeout": {
+      "text2": ["Čas do", "vypnutí"],
+      "desc": "Čas do automatického vypnutí (Minut)."
+    },
+    "MotionSensitivity": {
+      "text2": ["Citlivost", "det. pohybu"],
+      "desc": "Citlivost detekce pohybu (0=Vyp | 1=Min | ... | 9=Max)."
+    },
+    "TemperatureUnit": {
+      "text2": ["Jednotky", "teploty"],
+      "desc": "Jednotky měření teploty (C=Celsius | F=Fahrenheit)."
+    },
+    "AdvancedIdle": {
+      "text2": ["Podrobnosti", "na vých. obr."],
+      "desc": "Zobrazit podrobnosti na výchozí obrazovce?"
+    },
+    "DisplayRotation": {
+      "text2": ["Orientace", "obrazovky"],
+      "desc": "Orientace obrazovky (P=Pravák | L=Levák | A=Auto)."
+    },
+    "BoostTemperature": {
+      "text2": ["Teplota v", "r. boost"],
+      "desc": "Teplota v režimu boost."
+    },
+    "AutoStart": {
+      "text2": ["Automatický", "start"],
+      "desc": "Při startu ihned nahřát hrot? (O=Pryč | P=Pájení | S=Spát | M=Spát teplota místnosti)"
+    },
+    "CooldownBlink": {
+      "text2": ["Blikáni při", "chladnutí"],
+      "desc": "Blikání teploty při chladnutí, dokud je hrot horký?"
+    },
+    "TemperatureCalibration": {
+      "text2": ["Kalibrovat", "teplotu?"],
+      "desc": "Kalibrace měření teploty."
+    },
+    "SettingsReset": {
+      "text2": ["Tovární", "nastavení?"],
+      "desc": "Obnovení továrního nastavení."
+    },
+    "VoltageCalibration": {
+      "text2": ["Kalibrovat", "vstupní napětí?"],
+      "desc": "Kalibrace vstupního napětí. Tlačítky uprav, podržením potvrď."
+    },
+    "AdvancedSoldering": {
+      "text2": ["Podrobnosti", "při pájení"],
+      "desc": "Zobrazit podrobnosti při pájení?"
+    },
+    "ScrollingSpeed": {
+      "text2": ["Rychlost", "popisků"],
+      "desc": "Rychlost posuvu popisků podobných tomuto (P=Pomalu | R=Rychle)"
+    },
+    "QCMaxVoltage": {
+      "text2": ["Výkon", "ve wattech"],
+      "desc": "Výkon použítého napájecího adaptéru ve wattech."
+    },
+    "PDNegTimeout": {
+      "text2": ["PD", "timeout"],
+      "desc": "PD negotiation timeout in 100ms steps for compatibility with some QC chargers (0: disabled)"
+    },
+    "PowerLimit": {
+      "text2": ["Omezení", "Výkonu"],
+      "desc": "Maximální příkon (Watty)"
+    },
+    "ReverseButtonTempChange": {
+      "text2": ["Prohodit", "tl. +-?"],
+      "desc": "Prohodí tlačítka plus a minus pro změnu teploty hrotu."
+    },
+    "TempChangeShortStep": {
+      "text2": ["Krok teploty", "krátký?"],
+      "desc": "Velikost skoku při změně teploty krátkým stiskem tlačítka!"
+    },
+    "TempChangeLongStep": {
+      "text2": ["Krok teploty", "dlouhý?"],
+      "desc": "Velikost skoku při změně teploty dlouhým stiskem tlačítka!"
+    },
+    "PowerPulsePower": {
+      "text2": ["Intenzita", "Výkon. pulsu"],
+      "desc": "Puls pro udržení zařízení v chodu (kvůli power bankám)."
+    },
+    "HallEffSensitivity": {
+      "text2": ["Hall Eff", "Sensitivity"],
+      "desc": "Sensitivity of the Hall effect sensor in detecting sleep (O=Off | L=Low | M=Medium | H=High)"
+    },
+    "LockingMode": {
+      "text2": ["Allow buttons", "locking"],
+      "desc": "When soldering, long press on both buttons lock them (D=Disable | B=Boost only | F=Full locking)"
+    },
+    "MinVolCell": {
+      "text2": ["Minimum", "voltage"],
+      "desc": "Minimum allowed voltage per cell (3S: 3 - 3,7V | 4-6S: 2,4 - 3,7V)"
+    },
+    "AnimLoop": {
+      "text2": ["Anim.", "loop"],
+      "desc": "Loop icon animations in root menu"
+    },
+    "AnimSpeed": {
+      "text2": ["Anim.", "speed"],
+      "desc": "Speed of icon animations in menu (O=off | L=low | M=medium | H=high)"
+    },
+    "PowerPulseWait": {
+      "text2": ["Power pulse", "wait time"],
+      "desc": "Time to wait before triggering every keep-awake pulse (x 2,5s)"
+    },
+    "PowerPulseDuration": {
+      "text2": ["Power pulse", "duration"],
+      "desc": "Keep-awake-pulse duration (x 250ms)"
+    },
+    "LanguageSwitch": {
+      "text2": ["Řeč:", " CS       Český"],
+      "desc": ""
+    },
+    "Brightness": {
+      "text2": ["Screen", "Brightness"],
+      "desc": "Adjust the contrast/brightness of the OLED screen"
+    },
+    "ColourInversion": {
+      "text2": ["Screen", "Invert"],
+      "desc": "Invert the colours of the OLED screen"
+    }
+  }
+}

Translations/translation_DA.json

@@ -0,0 +1,213 @@
+{
+  "languageCode": "DA",
+  "languageLocalName": "Dansk",
+  "fonts": ["ascii_basic", "latin_extended"],
+  "messages": {
+    "SettingsCalibrationDone": "Calibration done!",
+    "SettingsCalibrationWarning": "Sørg for at loddespidsen er ved stuetemperatur, inden du fortsætter!",
+    "SettingsResetWarning": "Are you sure to reset settings to default values?",
+    "UVLOWarningString": "Lav Volt",
+    "UndervoltageString": "Undervoltage",
+    "InputVoltageString": "Input V: ",
+    "WarningTipTempString": "Tip Temp: ",
+    "BadTipString": "BAD TIP",
+    "SleepingSimpleString": "Zzzz",
+    "SleepingAdvancedString": "Dvale...",
+    "WarningSimpleString": "Varm",
+    "WarningAdvancedString": "VARM LODDESPIDS!",
+    "SleepingTipAdvancedString": "Tip:",
+    "IdleTipString": "Tip:",
+    "IdleSetString": " Set:",
+    "TipDisconnectedString": "TIP DISCONNECTED",
+    "SolderingAdvancedPowerPrompt": "Power: ",
+    "OffString": "Off",
+    "YourGainMessage": "Your gain:"
+  },
+  "messagesWarn": {
+    "ResetOKMessage": "Reset OK",
+    "SettingsResetMessage": ["Settings were", "reset!"],
+    "NoAccelerometerMessage": ["No accelerometer", "detected!"],
+    "NoPowerDeliveryMessage": ["No USB-PD IC", "detected!"],
+    "LockingKeysString": " LOCKED",
+    "UnlockingKeysString": "UNLOCKED",
+    "WarningKeysLockedString": "!LOCKED!",
+    "WarningThermalRunaway": ["Thermal", "Runaway"]
+  },
+  "characters": {
+    "SettingRightChar": "H",
+    "SettingLeftChar": "V",
+    "SettingAutoChar": "A",
+    "SettingOffChar": "O",
+    "SettingSlowChar": "S",
+    "SettingMediumChar": "M",
+    "SettingFastChar": "F",
+    "SettingStartNoneChar": "S",
+    "SettingStartSolderingChar": "L",
+    "SettingStartSleepChar": "D",
+    "SettingStartSleepOffChar": "R",
+    "SettingSensitivityOff": "O",
+    "SettingSensitivityLow": "L",
+    "SettingSensitivityMedium": "M",
+    "SettingSensitivityHigh": "H",
+    "SettingLockDisableChar": "D",
+    "SettingLockBoostChar": "B",
+    "SettingLockFullChar": "F",
+    "SettingNAChar": "N/A"
+  },
+  "menuGroups": {
+    "PowerMenu": {
+      "text2": ["Power", "settings"],
+      "desc": "Power settings"
+    },
+    "SolderingMenu": {
+      "text2": ["Soldering", "Settings"],
+      "desc": "Soldering settings"
+    },
+    "PowerSavingMenu": {
+      "text2": ["Sleep", "Modes"],
+      "desc": "Power Saving Settings"
+    },
+    "UIMenu": {
+      "text2": ["User", "Interface"],
+      "desc": "User Interface settings"
+    },
+    "AdvancedMenu": {
+      "text2": ["Advanced", "Options"],
+      "desc": "Advanced options"
+    }
+  },
+  "menuOptions": {
+    "DCInCutoff": {
+      "text2": ["Power", "source"],
+      "desc": "Strømforsyning. Indstil Cutoff Spændingen. (DC 10V) (S 3,3V per cell)"
+    },
+    "SleepTemperature": {
+      "text2": ["Sleep", "temp"],
+      "desc": "Dvale Temperatur (C)"
+    },
+    "SleepTimeout": {
+      "text2": ["Sleep", "timeout"],
+      "desc": "Dvale Timeout (Minutter | Sekunder)"
+    },
+    "ShutdownTimeout": {
+      "text2": ["Shutdown", "timeout"],
+      "desc": "sluknings Timeout (Minutter)"
+    },
+    "MotionSensitivity": {
+      "text2": ["Motion", "sensitivity"],
+      "desc": "Bevægelsesfølsomhed (0=Slukket | 1=Mindst følsom | ... | 9=Mest følsom)"
+    },
+    "TemperatureUnit": {
+      "text2": ["Temperature", "unit"],
+      "desc": "Temperatur Enhed (C=Celsius | F=Fahrenheit)"
+    },
+    "AdvancedIdle": {
+      "text2": ["Detailed", "idle screen"],
+      "desc": "Vis detialieret information med en mindre skriftstørrelse på standby skærmen."
+    },
+    "DisplayRotation": {
+      "text2": ["Display", "orientation"],
+      "desc": "Skærm Orientering (H=Højre Håndet | V=Venstre Håndet | A=Automatisk)"
+    },
+    "BoostTemperature": {
+      "text2": ["Boost", "temp"],
+      "desc": "Temperatur i \"boost\" mode"
+    },
+    "AutoStart": {
+      "text2": ["Auto", "start"],
+      "desc": "Start automatisk med lodning når strøm sættes til. (S=Slukket | L=Lodning | D=Dvale tilstand | R=Dvale tilstand rumtemperatur)"
+    },
+    "CooldownBlink": {
+      "text2": ["Cooldown", "blink"],
+      "desc": "Blink temperaturen på skærmen, mens spidsen stadig er varm."
+    },
+    "TemperatureCalibration": {
+      "text2": ["Calibrate", "temperature?"],
+      "desc": "kalibrere spids temperatur."
+    },
+    "SettingsReset": {
+      "text2": ["Factory", "Reset?"],
+      "desc": "Gendan alle indstillinger"
+    },
+    "VoltageCalibration": {
+      "text2": ["Calibrate", "input voltage?"],
+      "desc": "VIN kalibrering. Knapperne justere, Lang tryk for at gå ud"
+    },
+    "AdvancedSoldering": {
+      "text2": ["Detailed", "solder screen"],
+      "desc": "Vis detialieret information mens der loddes"
+    },
+    "ScrollingSpeed": {
+      "text2": ["Scrolling", "speed"],
+      "desc": "Speed this text scrolls past at"
+    },
+    "QCMaxVoltage": {
+      "text2": ["Power", "Wattage"],
+      "desc": "Power Wattage of the power adapter used"
+    },
+    "PDNegTimeout": {
+      "text2": ["PD", "timeout"],
+      "desc": "PD negotiation timeout in 100ms steps for compatibility with some QC chargers (0: disabled)"
+    },
+    "PowerLimit": {
+      "text2": ["Power", "Limit"],
+      "desc": "Maximum power the iron can use (Watts)"
+    },
+    "ReverseButtonTempChange": {
+      "text2": ["Key +-", "reverse?"],
+      "desc": "Reverse the tip temperature change buttons plus minus assignment."
+    },
+    "TempChangeShortStep": {
+      "text2": ["Temp change", "short?"],
+      "desc": "Temperature change steps on short button press!"
+    },
+    "TempChangeLongStep": {
+      "text2": ["Temp change", "long?"],
+      "desc": "Temperature change steps on long button press!"
+    },
+    "PowerPulsePower": {
+      "text2": ["Power", "Pulse W"],
+      "desc": "Keep awake pulse power intensity"
+    },
+    "HallEffSensitivity": {
+      "text2": ["Hall Eff", "Sensitivity"],
+      "desc": "Sensitivity of the Hall effect sensor in detecting sleep (O=Off | L=Low | M=Medium | H=High)"
+    },
+    "LockingMode": {
+      "text2": ["Allow buttons", "locking"],
+      "desc": "When soldering, long press on both buttons lock them (D=Disable | B=Boost only | F=Full locking)"
+    },
+    "MinVolCell": {
+      "text2": ["Minimum", "voltage"],
+      "desc": "Minimum allowed voltage per cell (3S: 3 - 3,7V | 4-6S: 2,4 - 3,7V)"
+    },
+    "AnimLoop": {
+      "text2": ["Anim.", "loop"],
+      "desc": "Loop icon animations in root menu"
+    },
+    "AnimSpeed": {
+      "text2": ["Anim.", "speed"],
+      "desc": "Speed of icon animations in menu (O=off | L=low | M=medium | H=high)"
+    },
+    "PowerPulseWait": {
+      "text2": ["Power pulse", "wait time"],
+      "desc": "Time to wait before triggering every keep-awake pulse (x 2,5s)"
+    },
+    "PowerPulseDuration": {
+      "text2": ["Power pulse", "duration"],
+      "desc": "Keep-awake-pulse duration (x 250ms)"
+    },
+    "LanguageSwitch": {
+      "text2": ["Sprog :", " DA       Dansk"],
+      "desc": ""
+    },
+    "Brightness": {
+      "text2": ["Screen", "Brightness"],
+      "desc": "Adjust the contrast/brightness of the OLED screen"
+    },
+    "ColourInversion": {
+      "text2": ["Screen", "Invert"],
+      "desc": "Invert the colours of the OLED screen"
+    }
+  }
+}

Translations/translation_DE.json

@@ -0,0 +1,214 @@
+{
+  "languageCode": "DE",
+  "languageLocalName": "Deutsch",
+  "fonts": ["ascii_basic", "latin_extended"],
+  "tempUnitFahrenheit": false,
+  "messages": {
+    "SettingsCalibrationDone": "Kalibrierung abgeschlossen!",
+    "SettingsCalibrationWarning": "Vor dem Fortfahren muss die Lötspitze vollständig abgekühlt sein!",
+    "SettingsResetWarning": "Sicher, dass alle Werte zurückgesetzt werden sollen?",
+    "UVLOWarningString": "V niedr.",
+    "UndervoltageString": "Unterspannung",
+    "InputVoltageString": "V Eingang: ",
+    "WarningTipTempString": "Temperatur: ",
+    "BadTipString": "Spitze Defekt",
+    "SleepingSimpleString": "Zzzz",
+    "SleepingAdvancedString": "Ruhemodus...",
+    "WarningSimpleString": "HEISS!",
+    "WarningAdvancedString": "! Achtung Heiß !",
+    "SleepingTipAdvancedString": "Temp:",
+    "IdleTipString": "Ist:",
+    "IdleSetString": " Soll:",
+    "TipDisconnectedString": "Spitze fehlt",
+    "SolderingAdvancedPowerPrompt": "Leistung: ",
+    "OffString": "Aus",
+    "YourGainMessage": "Dein Faktor:"
+  },
+  "messagesWarn": {
+    "ResetOKMessage": "Reset OK",
+    "SettingsResetMessage": ["Einstellungen", "zurückgesetzt!"],
+    "NoAccelerometerMessage": ["Bewegungssensor", "nicht erkannt!"],
+    "NoPowerDeliveryMessage": ["USB-PD IC", "nicht erkannt!"],
+    "LockingKeysString": "GESPERRT",
+    "UnlockingKeysString": "ENTSPERRT",
+    "WarningKeysLockedString": "!GESPERRT!",
+    "WarningThermalRunaway": ["Thermal", "Runaway"]
+  },
+  "characters": {
+    "SettingRightChar": "R",
+    "SettingLeftChar": "L",
+    "SettingAutoChar": "A",
+    "SettingOffChar": "A",
+    "SettingSlowChar": "L",
+    "SettingMediumChar": "M",
+    "SettingFastChar": "S",
+    "SettingStartNoneChar": "A",
+    "SettingStartSolderingChar": "L",
+    "SettingStartSleepChar": "R",
+    "SettingStartSleepOffChar": "K",
+    "SettingSensitivityOff": "A",
+    "SettingSensitivityLow": "N",
+    "SettingSensitivityMedium": "M",
+    "SettingSensitivityHigh": "H",
+    "SettingLockDisableChar": "A",
+    "SettingLockBoostChar": "B",
+    "SettingLockFullChar": "V",
+    "SettingNAChar": "-"
+  },
+  "menuGroups": {
+    "PowerMenu": {
+      "text2": ["Energie-", "einstellungen"],
+      "desc": "Energieeinstellungen"
+    },
+    "SolderingMenu": {
+      "text2": ["Löt-", "einstellungen"],
+      "desc": "Löteinstellungen"
+    },
+    "PowerSavingMenu": {
+      "text2": ["Ruhe-", "modus"],
+      "desc": "Energiespareinstellungen"
+    },
+    "UIMenu": {
+      "text2": ["Anzeige-", "einstellungen"],
+      "desc": "Menüeinstellungen"
+    },
+    "AdvancedMenu": {
+      "text2": ["Erweiterte", "Einstellungen"],
+      "desc": "Erweiterte Einstellungen"
+    }
+  },
+  "menuOptions": {
+    "DCInCutoff": {
+      "text2": ["Spannungs-", "quelle"],
+      "desc": "Spannungsquelle (Abschaltspannung) (DC=10V | nS=n*3.3V für n LiIon-Zellen)"
+    },
+    "SleepTemperature": {
+      "text2": ["Ruhe-", "temperatur"],
+      "desc": "Ruhetemperatur der Spitze"
+    },
+    "SleepTimeout": {
+      "text2": ["Ruhever-", "zögerung"],
+      "desc": "Dauer vor Übergang in den Ruhemodus (S=Sekunden | M=Minuten)"
+    },
+    "ShutdownTimeout": {
+      "text2": ["Abschalt-", "verzög."],
+      "desc": "Dauer vor automatischer Abschaltung (M=Minuten)"
+    },
+    "MotionSensitivity": {
+      "text2": ["Bewegungs-", "empfindlichk."],
+      "desc": "0=aus | 1=minimal | ... | 9=maximal"
+    },
+    "TemperatureUnit": {
+      "text2": ["Temperatur-", "einheit"],
+      "desc": "C=Celsius | F=Fahrenheit"
+    },
+    "AdvancedIdle": {
+      "text2": ["Detaillierte", "Ruheansicht"],
+      "desc": "Detaillierte Anzeige im Ruhemodus"
+    },
+    "DisplayRotation": {
+      "text2": ["Anzeige-", "ausrichtung"],
+      "desc": "R=rechtshändig | L=linkshändig | A=automatisch"
+    },
+    "BoostTemperature": {
+      "text2": ["Boost-", "temperatur"],
+      "desc": "Temperatur der Lötspitze im Boostmodus"
+    },
+    "AutoStart": {
+      "text2": ["Start im", "Lötmodus"],
+      "desc": "Heizverhalten beim Einschalten der Spannungsversorgung (A=aus | L=Lötmodus | R=Ruhemodus | K=Ruhemodus mit kalter Spitze)"
+    },
+    "CooldownBlink": {
+      "text2": ["Abkühl-", "blinken"],
+      "desc": "Temperaturanzeige blinkt beim Abkühlen, solange Spitze heiß ist"
+    },
+    "TemperatureCalibration": {
+      "text2": ["Temperatur", "kalibrieren?"],
+      "desc": "Kalibrierung der Lötspitzentemperatur"
+    },
+    "SettingsReset": {
+      "text2": ["Einstellungen", "zurücksetzen?"],
+      "desc": "Werte auf Werkseinstellungen zurücksetzen"
+    },
+    "VoltageCalibration": {
+      "text2": ["Eingangsspannung", "kalibrieren?"],
+      "desc": "Kalibrierung der Eingangsspannung (Langer Tastendruck zum Verlassen)"
+    },
+    "AdvancedSoldering": {
+      "text2": ["Detaillierte", "Lötansicht"],
+      "desc": "Detaillierte Anzeige im Lötmodus"
+    },
+    "ScrollingSpeed": {
+      "text2": ["Scroll-", "geschw."],
+      "desc": "Scrollgeschwindigkeit der Erläuterungen (L=langsam | S=schnell)"
+    },
+    "QCMaxVoltage": {
+      "text2": ["Spannungs-", "maximum"],
+      "desc": "Maximal zulässige Spannung der verwendeten Spannungsversorgung (V=Volt)"
+    },
+    "PDNegTimeout": {
+      "text2": ["PD", "timeout"],
+      "desc": "PD Abfragedauer in 100ms Schritten (Kompatibilität mit best. QC-Ladegeräten)"
+    },
+    "PowerLimit": {
+      "text2": ["Leistungs-", "maximum"],
+      "desc": "Maximal zulässige Leistungsaufnahme des Lötkolbens (W=Watt)"
+    },
+    "ReverseButtonTempChange": {
+      "text2": ["+- Tasten", "umkehren?"],
+      "desc": "Tastenbelegung zur Temperaturänderung umkehren"
+    },
+    "TempChangeShortStep": {
+      "text2": ["Temp-Schritt", "Druck kurz"],
+      "desc": "Schrittweite für Temperaturwechsel bei kurzem Tastendruck"
+    },
+    "TempChangeLongStep": {
+      "text2": ["Temp-Schritt", "Druck lang"],
+      "desc": "Schrittweite für Temperaturwechsel bei langem Tastendruck"
+    },
+    "PowerPulsePower": {
+      "text2": ["Leistungs-", "impuls"],
+      "desc": "Powerbank mit einem Impuls wach halten (Watt)"
+    },
+    "HallEffSensitivity": {
+      "text2": ["Empfindlichkeit", "der Hall-Sonde"],
+      "desc": "Empfindlichkeit der Hall-Sonde beim Erkennen des Ruhemodus (A=aus | N=niedrig | M=mittel | H=hoch)"
+    },
+    "LockingMode": {
+      "text2": ["Tasten-", "sperre"],
+      "desc": "Langes drücken beider Tasten im Lötmodus sperrt diese (A=aus | B=nur Boost | V=vollständig)"
+    },
+    "MinVolCell": {
+      "text2": ["Minimale", "Spannung"],
+      "desc": "Minimal zulässige Spannung pro Zelle (3S: 3 - 3,7V | 4-6S: 2,4 - 3,7V)"
+    },
+    "AnimLoop": {
+      "text2": ["Anim.", "Schleife"],
+      "desc": "Icon-Animationen im Hauptmenü wiederholen"
+    },
+    "AnimSpeed": {
+      "text2": ["Anim.", "Geschw."],
+      "desc": "Geschwindigkeit der Icon-Animationen im Menü (A=aus | L=langsam | M=mittel | S=schnell)"
+    },
+    "PowerPulseWait": {
+      "text2": ["Impuls-", "verzögerung"],
+      "desc": "Dauer vor Abgabe von Wachhalteimpulsen (x 2,5s)"
+    },
+    "PowerPulseDuration": {
+      "text2": ["Impuls-", "dauer"],
+      "desc": "Dauer des Wachhalteimpulses (x 250ms)"
+    },
+    "LanguageSwitch": {
+      "text2": ["Sprache:", " DE     Deutsch"],
+      "desc": ""
+    },
+    "Brightness": {
+      "text2": ["Bildschirm-", "kontrast"],
+      "desc": "Verändert die Helligkeit des OLED-Displays"
+    },
+    "ColourInversion": {
+      "text2": ["Farben", "umkehren"],
+      "desc": "Invertiert die Farben des OLED-Displays"
+    }
+  }
+}

Translations/translation_EN.json

@@ -0,0 +1,214 @@
+{
+  "languageCode": "EN",
+  "languageLocalName": "English",
+  "fonts": ["ascii_basic"],
+  "tempUnitFahrenheit": true,
+  "messages": {
+    "SettingsCalibrationDone": "Calibration done!",
+    "SettingsCalibrationWarning": "Please ensure the tip is at room temperature, before continuing!",
+    "SettingsResetWarning": "Sure you want to restore default settings?",
+    "UVLOWarningString": "DC LOW",
+    "UndervoltageString": "Undervoltage",
+    "InputVoltageString": "Input V: ",
+    "WarningTipTempString": "Tip temp: ",
+    "BadTipString": "BAD TIP",
+    "SleepingSimpleString": "Zzzz",
+    "SleepingAdvancedString": "Sleeping...",
+    "WarningSimpleString": "HOT!",
+    "WarningAdvancedString": "!!! HOT TIP !!!",
+    "SleepingTipAdvancedString": "Tip:",
+    "IdleTipString": "Tip:",
+    "IdleSetString": " Set:",
+    "TipDisconnectedString": "NO TIP",
+    "SolderingAdvancedPowerPrompt": "Power: ",
+    "OffString": "Off",
+    "YourGainMessage": "Your gain:"
+  },
+  "messagesWarn": {
+    "ResetOKMessage": "Reset OK",
+    "SettingsResetMessage": ["Some settings", "changed"],
+    "NoAccelerometerMessage": ["No accelerometer", "detected!"],
+    "NoPowerDeliveryMessage": ["No USB-PD IC", "detected!"],
+    "LockingKeysString": "LOCKED",
+    "UnlockingKeysString": "UNLOCKED",
+    "WarningKeysLockedString": "!LOCKED!",
+    "WarningThermalRunaway": ["Thermal", "Runaway"]
+  },
+  "characters": {
+    "SettingRightChar": "R",
+    "SettingLeftChar": "L",
+    "SettingAutoChar": "A",
+    "SettingOffChar": "O",
+    "SettingSlowChar": "S",
+    "SettingMediumChar": "M",
+    "SettingFastChar": "F",
+    "SettingStartNoneChar": "O",
+    "SettingStartSolderingChar": "S",
+    "SettingStartSleepChar": "Z",
+    "SettingStartSleepOffChar": "R",
+    "SettingSensitivityOff": "O",
+    "SettingSensitivityLow": "L",
+    "SettingSensitivityMedium": "M",
+    "SettingSensitivityHigh": "H",
+    "SettingLockDisableChar": "D",
+    "SettingLockBoostChar": "B",
+    "SettingLockFullChar": "F",
+    "SettingNAChar": "N/A"
+  },
+  "menuGroups": {
+    "PowerMenu": {
+      "text2": ["Power", "settings"],
+      "desc": "Power settings"
+    },
+    "SolderingMenu": {
+      "text2": ["Soldering", "settings"],
+      "desc": "Soldering settings"
+    },
+    "PowerSavingMenu": {
+      "text2": ["Sleep", "mode"],
+      "desc": "Power saving settings"
+    },
+    "UIMenu": {
+      "text2": ["User", "interface"],
+      "desc": "User interface settings"
+    },
+    "AdvancedMenu": {
+      "text2": ["Advanced", "settings"],
+      "desc": "Advanced settings"
+    }
+  },
+  "menuOptions": {
+    "DCInCutoff": {
+      "text2": ["Power", "source"],
+      "desc": "Power source. Sets cutoff voltage. (DC 10V) (S 3.3V per cell, disable power limit)"
+    },
+    "SleepTemperature": {
+      "text2": ["Sleep", "temp"],
+      "desc": "Tip temperature while in \"sleep mode\""
+    },
+    "SleepTimeout": {
+      "text2": ["Sleep", "timeout"],
+      "desc": "Interval before \"sleep mode\" kicks in (S=seconds | M=minutes)"
+    },
+    "ShutdownTimeout": {
+      "text2": ["Shutdown", "timeout"],
+      "desc": "Interval before the iron shuts down (M=minutes)"
+    },
+    "MotionSensitivity": {
+      "text2": ["Motion", "sensitivity"],
+      "desc": "0=off | 1=least sensitive | ... | 9=most sensitive"
+    },
+    "TemperatureUnit": {
+      "text2": ["Temperature", "unit"],
+      "desc": "C=Celsius | F=Fahrenheit"
+    },
+    "AdvancedIdle": {
+      "text2": ["Detailed", "idle screen"],
+      "desc": "Display detailed information in a smaller font on the idle screen"
+    },
+    "DisplayRotation": {
+      "text2": ["Display", "orientation"],
+      "desc": "R=right-handed | L=left-handed | A=automatic"
+    },
+    "BoostTemperature": {
+      "text2": ["Boost", "temp"],
+      "desc": "Temperature used in \"boost mode\""
+    },
+    "AutoStart": {
+      "text2": ["Heat", "on power up"],
+      "desc": "O=off | S=soldering temp | Z=standby at sleep temp until moved | R=standby without heating until moved"
+    },
+    "CooldownBlink": {
+      "text2": ["Cooldown", "blink"],
+      "desc": "Flash the temperature reading after heating was halted while the tip is still hot"
+    },
+    "TemperatureCalibration": {
+      "text2": ["Calibrate", "temperature?"],
+      "desc": "Start tip temperature offset calibration"
+    },
+    "SettingsReset": {
+      "text2": ["Factory", "reset?"],
+      "desc": "Reset settings to default"
+    },
+    "VoltageCalibration": {
+      "text2": ["Calibrate", "input voltage?"],
+      "desc": "Start VIN calibration (long press to exit)"
+    },
+    "AdvancedSoldering": {
+      "text2": ["Detailed", "solder screen"],
+      "desc": "Display detailed information in a smaller font on soldering screen"
+    },
+    "ScrollingSpeed": {
+      "text2": ["Scrolling", "speed"],
+      "desc": "Speed info text scrolls past at (S=slow | F=fast)"
+    },
+    "QCMaxVoltage": {
+      "text2": ["QC", "voltage"],
+      "desc": "Max QC voltage the iron should negotiate for"
+    },
+    "PDNegTimeout": {
+      "text2": ["PD", "timeout"],
+      "desc": "PD negotiation timeout in 100ms steps for compatibility with some QC chargers"
+    },
+    "PowerLimit": {
+      "text2": ["Power", "limit"],
+      "desc": "Maximum power the iron can use (W=watt)"
+    },
+    "ReverseButtonTempChange": {
+      "text2": ["Reverse", "+ - keys"],
+      "desc": "Reverse assignment of temperature adjustment buttons"
+    },
+    "TempChangeShortStep": {
+      "text2": ["Temp change", "short"],
+      "desc": "Temperature change increment on short button press"
+    },
+    "TempChangeLongStep": {
+      "text2": ["Temp change", "long"],
+      "desc": "Temperature change increment on long button press"
+    },
+    "PowerPulsePower": {
+      "text2": ["Power", "pulse"],
+      "desc": "Intensity of power of keep-awake-pulse (watt)"
+    },
+    "HallEffSensitivity": {
+      "text2": ["Hall sensor", "sensitivity"],
+      "desc": "Sensitivity of the Hall effect sensor to detect sleep (O=off | L=low | M=medium | H=high)"
+    },
+    "LockingMode": {
+      "text2": ["Allow locking", "buttons"],
+      "desc": "While soldering, hold down both buttons to toggle locking them (D=disable | B=boost mode only | F=full locking)"
+    },
+    "MinVolCell": {
+      "text2": ["Minimum", "voltage"],
+      "desc": "Minimum allowed voltage per cell (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)"
+    },
+    "AnimLoop": {
+      "text2": ["Anim.", "loop"],
+      "desc": "Loop icon animations in main menu"
+    },
+    "AnimSpeed": {
+      "text2": ["Anim.", "speed"],
+      "desc": "Pace of icon animations in menu (O=off | S=slow | M=medium | F=fast)"
+    },
+    "PowerPulseWait": {
+      "text2": ["Power pulse", "delay"],
+      "desc": "Delay before keep-awake pulse is triggered (x 2.5s)"
+    },
+    "PowerPulseDuration": {
+      "text2": ["Power pulse", "duration"],
+      "desc": "Keep-awake-pulse duration (x 250ms)"
+    },
+    "LanguageSwitch": {
+      "text2": ["Language:", " EN     English"],
+      "desc": "Current firmware language"
+    },
+    "Brightness": {
+      "text2": ["Screen", "contrast"],
+      "desc": "Adjust the brightness of the OLED screen"
+    },
+    "ColourInversion": {
+      "text2": ["Invert", "screen"],
+      "desc": "Invert the colours of the OLED screen"
+    }
+  }
+}

Translations/translation_ES.json

@@ -0,0 +1,214 @@
+{
+  "languageCode": "ES",
+  "languageLocalName": "Castellano",
+  "fonts": ["ascii_basic", "latin_extended"],
+  "messages": {
+    "SettingsCalibrationDone": "¡Calibrada!",
+    "SettingsCalibrationWarning": "¡Asegúrate que la punta esté a temperatura ambiente antes de empezar!",
+    "SettingsResetWarning": "¿Quieres restablecer los ajustes?",
+    "UVLOWarningString": "CC BAJA",
+    "UndervoltageString": "Voltaje bajo",
+    "InputVoltageString": "Voltaje: ",
+    "WarningTipTempString": "Temp punta: ",
+    "BadTipString": "PT. ROTA",
+    "SleepingSimpleString": "Zzzz",
+    "SleepingAdvancedString": "En reposo...",
+    "WarningSimpleString": "QUEMA",
+    "WarningAdvancedString": "¡LA PUNTA QUEMA!",
+    "SleepingTipAdvancedString": "Punta:",
+    "IdleTipString": "Punta:",
+    "IdleSetString": " Aj:",
+    "TipDisconnectedString": "NO HAY PUNTA",
+    "SolderingAdvancedPowerPrompt": "Potencia: ",
+    "OffString": " No",
+    "YourGainMessage": "Gananc.:",
+    "SettingsResetMessage": "Ajustes borrados"
+  },
+  "messagesWarn": {
+    "ResetOKMessage": "Hecho.",
+    "SettingsResetMessage": ["Los ajustes fueron", "¡Reinicio!"],
+    "NoAccelerometerMessage": ["Sin acelerómetro", "¡Detectado!"],
+    "NoPowerDeliveryMessage": ["Sin USB-PD IC", "¡Detectado!"],
+    "LockingKeysString": " BLOQUEADO",
+    "UnlockingKeysString": "DESBLOQUEADO",
+    "WarningKeysLockedString": "¡BLOQUEADO!",
+    "WarningThermalRunaway": ["Thermal", "Runaway"]
+  },
+  "characters": {
+    "SettingRightChar": "D",
+    "SettingLeftChar": "I",
+    "SettingAutoChar": "A",
+    "SettingOffChar": "O",
+    "SettingSlowChar": "L",
+    "SettingMediumChar": "M",
+    "SettingFastChar": "R",
+    "SettingStartNoneChar": "N",
+    "SettingStartSolderingChar": "S",
+    "SettingStartSleepChar": "R",
+    "SettingStartSleepOffChar": "F",
+    "SettingSensitivityOff": "O",
+    "SettingSensitivityLow": "L",
+    "SettingSensitivityMedium": "M",
+    "SettingSensitivityHigh": "H",
+    "SettingLockDisableChar": "D",
+    "SettingLockBoostChar": "B",
+    "SettingLockFullChar": "F",
+    "SettingNAChar": "N/A"
+  },
+  "menuGroups": {
+    "PowerMenu": {
+      "text2": ["Potencia", "ajustes"],
+      "desc": "Ajustes de potencia"
+    },
+    "SolderingMenu": {
+      "text2": ["Ajustes de", "soldadura"],
+      "desc": "Ajustes para soldar."
+    },
+    "PowerSavingMenu": {
+      "text2": ["Modos de", "reposo"],
+      "desc": "Ajustes de ahorro energético."
+    },
+    "UIMenu": {
+      "text2": ["Interfaz", "de usuario"],
+      "desc": "Ajustes de interfaz de usuario."
+    },
+    "AdvancedMenu": {
+      "text2": ["Ajustes", "avanzados"],
+      "desc": "Ajustes avanzados."
+    }
+  },
+  "menuOptions": {
+    "DCInCutoff": {
+      "text2": ["Fuente", "de energía"],
+      "desc": "Elige el tipo de fuente para limitar el voltaje (DC 10V) (S 3,3V por pila, ilimitado)"
+    },
+    "SleepTemperature": {
+      "text2": ["Temperatura", "en reposo"],
+      "desc": "Temperatura de la punta en reposo."
+    },
+    "SleepTimeout": {
+      "text2": ["Entrar", "en reposo"],
+      "desc": "Tiempo de inactividad para entrar en reposo (min | seg)"
+    },
+    "ShutdownTimeout": {
+      "text2": ["Tiempo de", "apagado"],
+      "desc": "Tiempo de inactividad para apagarse (en minutos)"
+    },
+    "MotionSensitivity": {
+      "text2": ["Detección de", "movimiento"],
+      "desc": "Tiempo de reacción al agarrar (0=no | 1=menos sensible | ... | 9=más sensible)"
+    },
+    "TemperatureUnit": {
+      "text2": ["Unidad de", "temperatura"],
+      "desc": "Unidad de temperatura (C=centígrados | F=Fahrenheit)"
+    },
+    "AdvancedIdle": {
+      "text2": ["Info extra en", "modo reposo"],
+      "desc": "Muestra información detallada en letra pequeña al reposar."
+    },
+    "DisplayRotation": {
+      "text2": ["Orientación", "de pantalla"],
+      "desc": "Orientación de la pantalla (D=diestro | I=zurdo | A=automático)"
+    },
+    "BoostTemperature": {
+      "text2": ["Ajustar la", "temp. extra"],
+      "desc": "Temperatura momentánea que se alcanza al apretar el botón del modo extra."
+    },
+    "AutoStart": {
+      "text2": ["Calentar", "al enchufar"],
+      "desc": "Se calienta él solo al arrancar (N=no | S=entrar en modo soldar | R=solo entrar en reposo | F=en reposo pero mantiene la punta fría)"
+    },
+    "CooldownBlink": {
+      "text2": ["Parpadear", "al enfriar"],
+      "desc": "La temperatura en pantalla parpadea mientras la punta siga caliente."
+    },
+    "TemperatureCalibration": {
+      "text2": ["Calibrar temp.", "de la punta"],
+      "desc": "Calibra la desviación térmica de la punta."
+    },
+    "SettingsReset": {
+      "text2": ["Volver a ajustes", "de fábrica"],
+      "desc": "Restablece todos los ajustes a los valores originales."
+    },
+    "VoltageCalibration": {
+      "text2": ["Calibrar voltaje", "de entrada"],
+      "desc": "Calibra VIN. Ajusta con ambos botones y mantén pulsado para salir."
+    },
+    "AdvancedSoldering": {
+      "text2": ["Info extra", "al soldar"],
+      "desc": "Muestra más datos por pantalla cuando se está soldando."
+    },
+    "ScrollingSpeed": {
+      "text2": ["Velocidad", "del texto"],
+      "desc": "Velocidad de desplazamiento del texto (R=rápida | L=lenta)"
+    },
+    "QCMaxVoltage": {
+      "text2": ["Potencia de", "entrada"],
+      "desc": "Potencia en vatios del adaptador de corriente utilizado."
+    },
+    "PDNegTimeout": {
+      "text2": ["PD", "timeout"],
+      "desc": "PD negotiation timeout in 100ms steps for compatibility with some QC chargers (0: disabled)"
+    },
+    "PowerLimit": {
+      "text2": ["Ajustar la", "potenc. máx."],
+      "desc": "Elige el límite de potencia máxima del soldador (en vatios)"
+    },
+    "ReverseButtonTempChange": {
+      "text2": ["Invertir", "botones +/-"],
+      "desc": "Intercambia las funciones de subir y bajar la temperatura de los botones +/- para que funcionen al revés."
+    },
+    "TempChangeShortStep": {
+      "text2": ["Cambio temp.", "puls. cortas"],
+      "desc": "Subir y bajar X grados de temperatura con cada pulsación corta de los botones +/-."
+    },
+    "TempChangeLongStep": {
+      "text2": ["Cambio temp.", "puls. largas"],
+      "desc": "Subir y bajar X grados de temperatura con cada pulsación larga de los botones +/-."
+    },
+    "PowerPulsePower": {
+      "text2": ["Pulsos bat.", "constantes"],
+      "desc": "Aplica unos pulsos necesarios para mantener encendidas ciertas baterías portátiles. En vatios."
+    },
+    "HallEffSensitivity": {
+      "text2": ["Hall Eff", "Sensibilidad"],
+      "desc": "Sensibilidad del sensor de efecto Hall en la detección de reposo (O=Off | L=Low | M=Medium | H=High)"
+    },
+    "LockingMode": {
+      "text2": ["Permitir botones", "bloqueo"],
+      "desc": "Al soldar, una pulsación larga en ambos botones los bloquea (D=desactivar | B=sólo potenciar | F=bloqueo total)."
+    },
+    "MinVolCell": {
+      "text2": ["Mínimo", "voltaje"],
+      "desc": "voltaje mínimo permitido por célula (3S: 3 - 3,7V | 4-6S: 2,4 - 3,7V)"
+    },
+    "AnimLoop": {
+      "text2": ["Anim.", "bucle"],
+      "desc": "Animaciones de iconos en bucle en el menú raíz"
+    },
+    "AnimSpeed": {
+      "text2": ["Anim.", "velocidad"],
+      "desc": "Velocidad de las animaciones de los iconos en el menú (O=off | L=low | M=medium | H=high)"
+    },
+    "PowerPulseWait": {
+      "text2": ["Impulso de potencia", "tiempo de espera"],
+      "desc": "Tiempo de espera antes de disparar cada pulso de mantenimiento de la vigilia (x 2,5s)"
+    },
+    "PowerPulseDuration": {
+      "text2": ["Impulso de potencia", "duración"],
+      "desc": "Duración del impulso de mantenimiento de la vigilia (x 250ms)"
+    },
+    "LanguageSwitch": {
+      "text2": ["Language:", " ES  Castellano"],
+      "desc": ""
+    },
+    "Brightness": {
+      "text2": ["Screen", "Brightness"],
+      "desc": "Adjust the contrast/brightness of the OLED screen"
+    },
+    "ColourInversion": {
+      "text2": ["Screen", "Invert"],
+      "desc": "Invert the colours of the OLED screen"
+    }
+  }
+}

Translations/translation_FI.json

@@ -0,0 +1,212 @@
+{
+  "languageCode": "FI",
+  "languageLocalName": "Suomi",
+  "fonts": ["ascii_basic", "latin_extended"],
+  "messages": {
+    "SettingsCalibrationDone": "Kalibrointi tehty!",
+    "SettingsCalibrationWarning": "Varmista että kärki on huoneenlämpöinen ennen jatkamista!",
+    "SettingsResetWarning": "Haluatko varmasti palauttaa oletusarvot?",
+    "UVLOWarningString": "DC ALH.",
+    "UndervoltageString": "Alijännite",
+    "InputVoltageString": "Jännite: ",
+    "WarningTipTempString": "Kärjet lämpö: ",
+    "BadTipString": "PAHA KÄRJET",
+    "SleepingSimpleString": "Zzzz",
+    "SleepingAdvancedString": "Lepotila...",
+    "WarningSimpleString": "KUUMA!",
+    "WarningAdvancedString": "!!! KUUMA KÄRJET !!!",
+    "SleepingTipAdvancedString": "Kärki:",
+    "IdleTipString": "Pää:",
+    "IdleSetString": "Aseta:",
+    "TipDisconnectedString": "KÄRKI PUUTTUU",
+    "SolderingAdvancedPowerPrompt": "Teho: ",
+    "OffString": "Off"
+  },
+  "messagesWarn": {
+    "ResetOKMessage": "Palautus",
+    "SettingsResetMessage": ["Asetukset", "palautettu!"],
+    "NoAccelerometerMessage": ["Kiihtyvyysanturi", "puuttuu!"],
+    "NoPowerDeliveryMessage": ["USB-PD IC", "puuttuu!"],
+    "LockingKeysString": " LUKITTU",
+    "UnlockingKeysString": "AUKI",
+    "WarningKeysLockedString": "!LUKKO!",
+    "WarningThermalRunaway": ["Thermal", "Runaway"]
+  },
+  "characters": {
+    "SettingRightChar": "O",
+    "SettingLeftChar": "V",
+    "SettingAutoChar": "A",
+    "SettingOffChar": "P",
+    "SettingSlowChar": "H",
+    "SettingMediumChar": "M",
+    "SettingFastChar": "N",
+    "SettingStartNoneChar": "E",
+    "SettingStartSolderingChar": "J",
+    "SettingStartSleepChar": "L",
+    "SettingStartSleepOffChar": "H",
+    "SettingSensitivityOff": "P",
+    "SettingSensitivityLow": "A",
+    "SettingSensitivityMedium": "K",
+    "SettingSensitivityHigh": "S",
+    "SettingLockDisableChar": "P",
+    "SettingLockBoostChar": "V",
+    "SettingLockFullChar": "K",
+    "SettingNAChar": "N/A"
+  },
+  "menuGroups": {
+    "PowerMenu": {
+      "text2": ["Virta-", "asetukset"],
+      "desc": "Virta-asetukset"
+    },
+    "SolderingMenu": {
+      "text2": ["Juotos-", "asetukset"],
+      "desc": "Juotosasetukset"
+    },
+    "PowerSavingMenu": {
+      "text2": ["Lepotilan", "asetukset"],
+      "desc": "Virransäästöasetukset"
+    },
+    "UIMenu": {
+      "text2": ["Käyttö-", "liittymä"],
+      "desc": "Käyttöliittymän asetukset"
+    },
+    "AdvancedMenu": {
+      "text2": ["Lisä-", "asetukset"],
+      "desc": "Lisäasetukset"
+    }
+  },
+  "menuOptions": {
+    "DCInCutoff": {
+      "text2": ["Virtalähde", "DC"],
+      "desc": "Virtalähde. Asettaa katkaisujännitteen. (DC 10V) (S 3.3V per kenno, poistaa virtarajoitukset)"
+    },
+    "SleepTemperature": {
+      "text2": ["Lepotilan", "lämpötila"],
+      "desc": "Kärjen lämpötila \"lepotilassa\""
+    },
+    "SleepTimeout": {
+      "text2": ["Lepotilan", "viive"],
+      "desc": "\"Lepotilan\" ajastus (S=sekuntia | M=minuuttia)"
+    },
+    "ShutdownTimeout": {
+      "text2": ["Sammutus", "viive"],
+      "desc": "Automaattisen sammutuksen ajastus (M=minuuttia)"
+    },
+    "MotionSensitivity": {
+      "text2": ["Liikkeen", "herkkyys"],
+      "desc": "0=pois päältä | 1=vähäinen herkkyys | ... | 9=suurin herkkyys"
+    },
+    "TemperatureUnit": {
+      "text2": ["Lämpötilan", "yksikkö"],
+      "desc": "C=celsius, F=fahrenheit"
+    },
+    "AdvancedIdle": {
+      "text2": ["Tiedot", "lepotilassa"],
+      "desc": "Näyttää yksityiskohtaisemmat pienemmällä fontilla tiedot lepotilassa."
+    },
+    "DisplayRotation": {
+      "text2": ["Näytön", "kierto"],
+      "desc": "O=oikeakätinen | V=vasenkätinen | A=automaattinen"
+    },
+    "BoostTemperature": {
+      "text2": ["Tehostus-", "lämpötila"],
+      "desc": "Tehostustilan lämpötila"
+    },
+    "AutoStart": {
+      "text2": ["Autom.", "käynnistys"],
+      "desc": "Käynnistää virrat kytkettäessä juotostilan automaattisesti. (E=Ei käytössä | J=juotostila | L=Lepotila | H=Lepotila huoneenlämpö)"
+    },
+    "CooldownBlink": {
+      "text2": ["Jäähdytyksen", "vilkutus"],
+      "desc": "Vilkuttaa jäähtyessä juotoskärjen lämpötilaa sen ollessa vielä vaarallisen kuuma"
+    },
+    "TemperatureCalibration": {
+      "text2": ["Kalibroi", "lämpötila?"],
+      "desc": "Kalibroi kärjen lämpötilaeron"
+    },
+    "SettingsReset": {
+      "text2": ["Palauta", "tehdasasetukset?"],
+      "desc": "Palauta kaikki asetukset oletusarvoihin"
+    },
+    "VoltageCalibration": {
+      "text2": ["Kalibroi", "tulojännite?"],
+      "desc": "Tulojännitten kalibrointi (VIN) (paina pitkään poistuaksesi)"
+    },
+    "AdvancedSoldering": {
+      "text2": ["Tarkempi", "juotosnäyttö"],
+      "desc": "Näyttää yksityiskohtaisemmat tiedot pienellä fontilla juotostilassa"
+    },
+    "ScrollingSpeed": {
+      "text2": ["Selityksien", "nopeus"],
+      "desc": "Selityksien vieritysnopeus (H=hidas | N=nopea)"
+    },
+    "QCMaxVoltage": {
+      "text2": ["QC", "jännite"],
+      "desc": "Ensisijainen maksimi QC jännite"
+    },
+    "PDNegTimeout": {
+      "text2": ["PD", "timeout"],
+      "desc": "PD negotiation timeout in 100ms steps for compatibility with some QC chargers (0: disabled)"
+    },
+    "PowerLimit": {
+      "text2": ["Tehon-", "rajoitus"],
+      "desc": "Suurin sallittu teho (Watti)"
+    },
+    "ReverseButtonTempChange": {
+      "text2": ["Suunnanvaihto", "+ - näppäimille"],
+      "desc": "Lämpötilapainikkeiden suunnan vaihtaminen"
+    },
+    "TempChangeShortStep": {
+      "text2": ["Lämmön muutos", "lyhyt painal."],
+      "desc": "Lämpötilan muutos lyhyellä painalluksella"
+    },
+    "TempChangeLongStep": {
+      "text2": ["Lämmön muutos", "pitkä painal."],
+      "desc": "Lämpötilan muutos pitkällä painalluksella"
+    },
+    "PowerPulsePower": {
+      "text2": ["Herätyspulssin", "voimakkuus"],
+      "desc": "Herätyspulssin voimakkuus (watti)"
+    },
+    "HallEffSensitivity": {
+      "text2": ["Hall-", "herk."],
+      "desc": "Hall-efektianturin herkkyys lepotilan tunnistuksessa  (P=pois | A=alhainen | K=keskiverto | S=suuri)"
+    },
+    "LockingMode": {
+      "text2": ["Salli nappien", "lukitus"],
+      "desc": "Kolvatessa paina molempia näppäimiä lukitaksesi ne (P=pois | V=vain tehostus | K=kaikki)"
+    },
+    "MinVolCell": {
+      "text2": ["Pienin", "jännite"],
+      "desc": "Pienin sallittu jännite per kenno (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)"
+    },
+    "AnimLoop": {
+      "text2": ["Animaation", "toistaminen"],
+      "desc": "Toista animaatiot valikossa"
+    },
+    "AnimSpeed": {
+      "text2": ["Animaation", "nopeus"],
+      "desc": "Animaatioiden nopeus valikossa (P=pois | A=alhainen | K=keskiverto | S=suuri)"
+    },
+    "PowerPulseWait": {
+      "text2": ["Pulssin", "odotusaika"],
+      "desc": "Odotusaika herätyspulssin lähetykseen (x 2.5s)"
+    },
+    "PowerPulseDuration": {
+      "text2": ["Pulssin", "kesto"],
+      "desc": "Herätyspulssin kesto (x 250ms)"
+    },
+    "LanguageSwitch": {
+      "text2": ["Kieli:", " FI       Suomi"],
+      "desc": ""
+    },
+    "Brightness": {
+      "text2": ["Screen", "Brightness"],
+      "desc": "Adjust the contrast/brightness of the OLED screen"
+    },
+    "ColourInversion": {
+      "text2": ["Screen", "Invert"],
+      "desc": "Invert the colours of the OLED screen"
+    }
+  }
+}

Translations/translation_FR.json

@@ -0,0 +1,213 @@
+{
+  "languageCode": "FR",
+  "languageLocalName": "Français",
+  "fonts": ["ascii_basic", "latin_extended"],
+  "messages": {
+    "SettingsCalibrationDone": "Calibration effectuée !",
+    "SettingsCalibrationWarning": "Assurez-vous que la panne soit à température ambiante avant de continuer !",
+    "SettingsResetWarning": "Voulez-vous vraiment réinitialiser les paramètres aux valeurs par défaut ?",
+    "UVLOWarningString": "DC FAIBL",
+    "UndervoltageString": "Sous-tension",
+    "InputVoltageString": "V d'entrée: ",
+    "WarningTipTempString": "Temp. Panne : ",
+    "BadTipString": "PANNE HS",
+    "SleepingSimpleString": "Zzzz",
+    "SleepingAdvancedString": "En veille...",
+    "WarningSimpleString": "CHAUD !",
+    "WarningAdvancedString": "ATTENTION ! CHAUD !",
+    "SleepingTipAdvancedString": "Panne:",
+    "IdleTipString": "Act:",
+    "IdleSetString": " Reg:",
+    "TipDisconnectedString": "PANNE DÉBRANCHÉE",
+    "SolderingAdvancedPowerPrompt": "Puiss.:",
+    "OffString": "Off",
+    "YourGainMessage": "Gain : "
+  },
+  "messagesWarn": {
+    "ResetOKMessage": "Reset OK",
+    "SettingsResetMessage": ["Réglages", "réinit. !"],
+    "NoAccelerometerMessage": ["Accéléromètre", "non détecté !"],
+    "NoPowerDeliveryMessage": ["USB-PD", "non détecté !"],
+    "LockingKeysString": "VERROUIL",
+    "UnlockingKeysString": "DEVERROU",
+    "WarningKeysLockedString": "! VERR. !",
+    "WarningThermalRunaway": ["Thermal", "Runaway"]
+  },
+  "characters": {
+    "SettingRightChar": "D",
+    "SettingLeftChar": "G",
+    "SettingAutoChar": "A",
+    "SettingOffChar": "D",
+    "SettingSlowChar": "L",
+    "SettingMediumChar": "M",
+    "SettingFastChar": "R",
+    "SettingStartNoneChar": "D",
+    "SettingStartSolderingChar": "A",
+    "SettingStartSleepChar": "V",
+    "SettingStartSleepOffChar": "O",
+    "SettingSensitivityOff": "D",
+    "SettingSensitivityLow": "B",
+    "SettingSensitivityMedium": "M",
+    "SettingSensitivityHigh": "H",
+    "SettingLockDisableChar": "D",
+    "SettingLockBoostChar": "B",
+    "SettingLockFullChar": "V",
+    "SettingNAChar": "N/A"
+  },
+  "menuGroups": {
+    "PowerMenu": {
+      "text2": ["Paramètres", "d'alim."],
+      "desc": "Paramètres d'alimentation"
+    },
+    "SolderingMenu": {
+      "text2": ["Paramètres", "de soudure"],
+      "desc": "Paramètres de soudure"
+    },
+    "PowerSavingMenu": {
+      "text2": ["Mode", "veille"],
+      "desc": "Paramètres d'économie d'énergie"
+    },
+    "UIMenu": {
+      "text2": ["Interface", "utilisateur"],
+      "desc": "Paramètres de l'interface utilisateur"
+    },
+    "AdvancedMenu": {
+      "text2": ["Options", "avancées"],
+      "desc": "Options avancées"
+    }
+  },
+  "menuOptions": {
+    "DCInCutoff": {
+      "text2": ["Source", "d'alim."],
+      "desc": "Source d'alimentation. Règle la tension de coupure (DC 10V) (S 3.3V par cellules, désactive la limite de puissance)"
+    },
+    "SleepTemperature": {
+      "text2": ["Temp.", "veille"],
+      "desc": "Température de la panne en \"mode veille\""
+    },
+    "SleepTimeout": {
+      "text2": ["Délai", "veille"],
+      "desc": "Délai avant mise en veille (S=secondes | M=minutes)"
+    },
+    "ShutdownTimeout": {
+      "text2": ["Délai", "extinction"],
+      "desc": "Délai avant extinction (M=minutes)"
+    },
+    "MotionSensitivity": {
+      "text2": ["Sensibilité", "au mouvement"],
+      "desc": "0=désactivé | 1=peu sensible | ... | 9=très sensible"
+    },
+    "TemperatureUnit": {
+      "text2": ["Unité de", "température"],
+      "desc": "C=Celsius | F=Fahrenheit"
+    },
+    "AdvancedIdle": {
+      "text2": ["Écran veille", "détaillé"],
+      "desc": "Afficher les informations détaillées sur l'écran de veille"
+    },
+    "DisplayRotation": {
+      "text2": ["Orientation", "de l'écran"],
+      "desc": "D=droitier | G=gaucher | A=automatique"
+    },
+    "BoostTemperature": {
+      "text2": ["Temp.", "boost"],
+      "desc": "Température utilisée en \"mode boost\""
+    },
+    "AutoStart": {
+      "text2": ["Chauffer au", "démarrage"],
+      "desc": "D=désactivé | A=activé | V=mode veille | O=mode veille à température ambiante"
+    },
+    "CooldownBlink": {
+      "text2": ["Refroidir en", "clignotant"],
+      "desc": "Faire clignoter la température lors du refroidissement tant que la panne est chaude"
+    },
+    "TemperatureCalibration": {
+      "text2": ["Étalonner", "température"],
+      "desc": "Étalonner température de la panne"
+    },
+    "SettingsReset": {
+      "text2": ["Réinitialisation", "d'usine"],
+      "desc": "Réinitialiser tous les réglages"
+    },
+    "VoltageCalibration": {
+      "text2": ["Étalonner", "tension d'entrée"],
+      "desc": "Étalonner tension d'entrée (appui long pour quitter)"
+    },
+    "AdvancedSoldering": {
+      "text2": ["Écran soudure", "détaillé"],
+      "desc": "Afficher les informations détaillées sur l'écran de soudure"
+    },
+    "ScrollingSpeed": {
+      "text2": ["Vitesse de", "défilement"],
+      "desc": "Vitesse de défilement du texte (R=rapide | L=lent)"
+    },
+    "QCMaxVoltage": {
+      "text2": ["Tension", "max. QC"],
+      "desc": "Tension maximale désirée avec une alimentation QC"
+    },
+    "PDNegTimeout": {
+      "text2": ["PD", "timeout"],
+      "desc": "PD negotiation timeout in 100ms steps for compatibility with some QC chargers (0: disabled)"
+    },
+    "PowerLimit": {
+      "text2": ["Limite de", "puissance"],
+      "desc": "Puissance maximale utilisable (W=watts)"
+    },
+    "ReverseButtonTempChange": {
+      "text2": ["Inverser les", "touches + -"],
+      "desc": "Inverser les boutons d'ajustement de température"
+    },
+    "TempChangeShortStep": {
+      "text2": ["Incrément", "appui court"],
+      "desc": "Incrément de changement de température sur appui court"
+    },
+    "TempChangeLongStep": {
+      "text2": ["Incrément", "appui long"],
+      "desc": "Incrément de changement de température sur appui long"
+    },
+    "PowerPulsePower": {
+      "text2": ["Puissance des", "impulsions"],
+      "desc": "Puissance des impulsions pour éviter la mise en veille des batteries (watts)"
+    },
+    "LockingMode": {
+      "text2": ["Verrouiller", "les boutons"],
+      "desc": "Pendant la soudure, appuyer sur les deux boutons pour les verrouiller (D=désactivé | B=boost seulement | V=verr. total)"
+    },
+    "HallEffSensitivity": {
+      "text2": ["Sensibilité", "capteur effet hall"],
+      "desc": "Sensibilité du capteur à effet Hall pour la mise en veille (D=désactivé | B=basse | M=moyenne | H=haute)"
+    },
+    "MinVolCell": {
+      "text2": ["Tension", "minimale"],
+      "desc": "Tension minimale autorisée par cellule (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)"
+    },
+    "AnimLoop": {
+      "text2": ["Rejouer", "anim. icônes"],
+      "desc": "Rejouer en boucle les animations des icônes dans le menu principal"
+    },
+    "AnimSpeed": {
+      "text2": ["Vitesse", "anim. icônes"],
+      "desc": "Vitesse des animations des icônes dans le menu (D=désactivé | L=lente | M=moyenne | R=rapide)"
+    },
+    "PowerPulseWait": {
+      "text2": ["Délai entre", "les impulsions"],
+      "desc": "Délai entre chaque impulsion pour empêcher la mise en veille (x 2.5s)"
+    },
+    "PowerPulseDuration": {
+      "text2": ["Durée des", "impulsions"],
+      "desc": "Durée des impulsions pour empêcher la mise en veille (x 250ms)"
+    },
+    "LanguageSwitch": {
+      "text2": ["Langue :", " FR    Français"],
+      "desc": ""
+    },
+    "Brightness": {
+      "text2": ["Screen", "Brightness"],
+      "desc": "Adjust the contrast/brightness of the OLED screen"
+    },
+    "ColourInversion": {
+      "text2": ["Screen", "Invert"],
+      "desc": "Invert the colours of the OLED screen"
+    }
+  }
+}

Translations/translation_HR.json

@@ -0,0 +1,213 @@
+{
+  "languageCode": "HR",
+  "languageLocalName": "Hrvatski",
+  "fonts": ["ascii_basic", "latin_extended"],
+  "messages": {
+    "SettingsCalibrationDone": "Kalibracija gotova!",
+    "SettingsCalibrationWarning": "Provjerite da je vršak ohlađen na sobnu temperaturu prije nego što nastavite!",
+    "SettingsResetWarning": "Jeste li sigurni da želite sve postavke vratiti na tvorničke vrijednosti?",
+    "UVLOWarningString": "BATERIJA",
+    "UndervoltageString": "PRENIZAK NAPON",
+    "InputVoltageString": "Napajanje: ",
+    "WarningTipTempString": "Temp vrha: ",
+    "BadTipString": "LOŠ VRH",
+    "SleepingSimpleString": "Zzz ",
+    "SleepingAdvancedString": "SPAVANJE...",
+    "WarningSimpleString": "VRUĆ",
+    "WarningAdvancedString": "OPREZ, VRUĆE!",
+    "SleepingTipAdvancedString": "Vrh: ",
+    "IdleTipString": "Vrh: ",
+    "IdleSetString": " / ",
+    "TipDisconnectedString": "VRH NIJE SPOJEN!",
+    "SolderingAdvancedPowerPrompt": "Snaga: ",
+    "OffString": "Off",
+    "YourGainMessage": "Your gain:"
+  },
+  "messagesWarn": {
+    "ResetOKMessage": "Reset OK",
+    "SettingsResetMessage": ["Settings were", "reset!"],
+    "NoAccelerometerMessage": ["No accelerometer", "detected!"],
+    "NoPowerDeliveryMessage": ["No USB-PD IC", "detected!"],
+    "LockingKeysString": " LOCKED",
+    "UnlockingKeysString": "UNLOCKED",
+    "WarningKeysLockedString": "!LOCKED!",
+    "WarningThermalRunaway": ["Thermal", "Runaway"]
+  },
+  "characters": {
+    "SettingRightChar": "D",
+    "SettingLeftChar": "L",
+    "SettingAutoChar": "A",
+    "SettingOffChar": "O",
+    "SettingSlowChar": "S",
+    "SettingMediumChar": "M",
+    "SettingFastChar": "B",
+    "SettingStartNoneChar": "I",
+    "SettingStartSolderingChar": "L",
+    "SettingStartSleepChar": "R",
+    "SettingStartSleepOffChar": "S",
+    "SettingSensitivityOff": "O",
+    "SettingSensitivityLow": "L",
+    "SettingSensitivityMedium": "M",
+    "SettingSensitivityHigh": "H",
+    "SettingLockDisableChar": "D",
+    "SettingLockBoostChar": "B",
+    "SettingLockFullChar": "F",
+    "SettingNAChar": "N/A"
+  },
+  "menuGroups": {
+    "PowerMenu": {
+      "text2": ["Power", "settings"],
+      "desc": "Power settings"
+    },
+    "SolderingMenu": {
+      "text2": ["Postavke", "lemljenja"],
+      "desc": "Postavke pri lemljenju"
+    },
+    "PowerSavingMenu": {
+      "text2": ["Ušteda", "energije"],
+      "desc": "Postavke spavanja i štednje energije"
+    },
+    "UIMenu": {
+      "text2": ["Korisničko", "sučelje"],
+      "desc": "Postavke korisničkog sučelja"
+    },
+    "AdvancedMenu": {
+      "text2": ["Napredne", "opcije"],
+      "desc": "Upravljanje naprednim opcijama"
+    }
+  },
+  "menuOptions": {
+    "DCInCutoff": {
+      "text2": ["Izvor", "napajanja"],
+      "desc": "Izvor napajanja. Postavlja napon isključivanja. (DC 10V) (S 3.3V po ćeliji)"
+    },
+    "SleepTemperature": {
+      "text2": ["Temp", "spavanja"],
+      "desc": "Temperatura na koju se spušta lemilica nakon određenog vremena mirovanja. (C | F)"
+    },
+    "SleepTimeout": {
+      "text2": ["Vrijeme", "spavanja"],
+      "desc": "Vrijeme mirovanja nakon kojega lemilica spušta temperaturu. (Minute | Sekunde)"
+    },
+    "ShutdownTimeout": {
+      "text2": ["Vrijeme", "gašenja"],
+      "desc": "Vrijeme mirovanja nakon kojega će se lemilica ugasiti. (Minute)"
+    },
+    "MotionSensitivity": {
+      "text2": ["Osjetljivost", "pokreta"],
+      "desc": "Osjetljivost prepoznavanja pokreta. (0=Ugašeno | 1=Najmanje osjetljivo | ... | 9=Najosjetljivije)"
+    },
+    "TemperatureUnit": {
+      "text2": ["Jedinica", "temperature"],
+      "desc": "Jedinica temperature. (C=Celzij | F=Fahrenheit)"
+    },
+    "AdvancedIdle": {
+      "text2": ["Detalji", "pri čekanju"],
+      "desc": "Prikazivanje detaljnih informacija tijekom čekanja."
+    },
+    "DisplayRotation": {
+      "text2": ["Rotacija", "ekrana"],
+      "desc": "Orijentacija ekrana. (D=Desnoruki | L=Ljevoruki | A=Automatski)"
+    },
+    "BoostTemperature": {
+      "text2": ["Boost", "temp"],
+      "desc": "Temperatura u pojačanom (Boost) načinu."
+    },
+    "AutoStart": {
+      "text2": ["Auto", "start"],
+      "desc": "Ako je aktivno, lemilica po uključivanju napajanja odmah počinje grijati. (I=isključeno | L=lemljenje | R=rezervni | S=rezervni sobna temperatura)"
+    },
+    "CooldownBlink": {
+      "text2": ["Upozorenje", "pri hlađenju"],
+      "desc": "Bljeskanje temperature prilikom hlađenja, ako je lemilica vruća."
+    },
+    "TemperatureCalibration": {
+      "text2": ["Kalibracija", "temperature"],
+      "desc": "Kalibriranje temperature mjeri razliku temperatura vrška i drške, dok je lemilica hladna."
+    },
+    "SettingsReset": {
+      "text2": ["Tvorničke", "postavke"],
+      "desc": "Vraćanje svih postavki na tvorničke vrijednosti."
+    },
+    "VoltageCalibration": {
+      "text2": ["Kalibracija", "napona napajanja"],
+      "desc": "Kalibracija ulaznog napona. Podešavanje gumbima, dugački pritisak za kraj."
+    },
+    "AdvancedSoldering": {
+      "text2": ["Detalji", "pri lemljenju"],
+      "desc": "Prikazivanje detaljnih informacija tijekom lemljenja."
+    },
+    "ScrollingSpeed": {
+      "text2": ["Brzina", "poruka"],
+      "desc": "Brzina kretanja dugačkih poruka. (B=brzo | S=sporo)"
+    },
+    "QCMaxVoltage": {
+      "text2": ["Snaga", "napajanja"],
+      "desc": "Snaga modula za napajanje"
+    },
+    "PDNegTimeout": {
+      "text2": ["PD", "timeout"],
+      "desc": "PD negotiation timeout in 100ms steps for compatibility with some QC chargers (0: disabled)"
+    },
+    "PowerLimit": {
+      "text2": ["Power", "Limit"],
+      "desc": "Maximum power the iron can use (Watts)"
+    },
+    "ReverseButtonTempChange": {
+      "text2": ["Key +-", "reverse?"],
+      "desc": "Reverse the tip temperature change buttons plus minus assignment."
+    },
+    "TempChangeShortStep": {
+      "text2": ["Temp change", "short?"],
+      "desc": "Temperature change steps on short button press!"
+    },
+    "TempChangeLongStep": {
+      "text2": ["Temp change", "long?"],
+      "desc": "Temperature change steps on long button press!"
+    },
+    "PowerPulsePower": {
+      "text2": ["Power", "Pulse W"],
+      "desc": "Keep awake pulse power intensity"
+    },
+    "HallEffSensitivity": {
+      "text2": ["Hall Eff", "Sensitivity"],
+      "desc": "Sensitivity of the Hall effect sensor in detecting sleep (O=Off | L=Low | M=Medium | H=High)"
+    },
+    "LockingMode": {
+      "text2": ["Allow buttons", "locking"],
+      "desc": "When soldering, long press on both buttons lock them (D=Disable | B=Boost only | F=Full locking)"
+    },
+    "MinVolCell": {
+      "text2": ["Minimum", "voltage"],
+      "desc": "Minimum allowed voltage per cell (3S: 3 - 3.7V, 4-6S: 2.4 - 3.7V)"
+    },
+    "AnimLoop": {
+      "text2": ["Anim.", "loop"],
+      "desc": "Loop icon animations in root menu"
+    },
+    "AnimSpeed": {
+      "text2": ["Anim.", "speed"],
+      "desc": "Speed of icon animations in menu (O=off | L=low | M=medium | H=high)"
+    },
+    "PowerPulseWait": {
+      "text2": ["Power pulse", "wait time"],
+      "desc": "Time to wait before triggering every keep-awake pulse (x 2.5s)"
+    },
+    "PowerPulseDuration": {
+      "text2": ["Power pulse", "duration"],
+      "desc": "Keep-awake-pulse duration (x 250ms)"
+    },
+    "LanguageSwitch": {
+      "text2": ["Jezik:", " HR    Hrvatski"],
+      "desc": ""
+    },
+    "Brightness": {
+      "text2": ["Screen", "Brightness"],
+      "desc": "Adjust the contrast/brightness of the OLED screen"
+    },
+    "ColourInversion": {
+      "text2": ["Screen", "Invert"],
+      "desc": "Invert the colours of the OLED screen"
+    }
+  }
+}

Translations/translation_HU.json

@@ -0,0 +1,213 @@
+{
+  "languageCode": "HU",
+  "languageLocalName": "Magyar",
+  "fonts": ["ascii_basic", "latin_extended"],
+  "messages": {
+    "SettingsCalibrationDone": "Kalibráció befejezve!",
+    "SettingsCalibrationWarning": "Folytatás előtt győződjön meg róla, hogy a páka szobahőmérsékletű!",
+    "SettingsResetWarning": "Biztosan visszaállítja a beállításokat az alapértelmezett értékekre?",
+    "UVLOWarningString": "DC KEVÉS",
+    "UndervoltageString": "Alulfeszültség",
+    "InputVoltageString": "Bemenet V: ",
+    "WarningTipTempString": "Hegy hő: ",
+    "BadTipString": "PÁKAHIBA",
+    "SleepingSimpleString": "Zzzz",
+    "SleepingAdvancedString": "Alvás...",
+    "WarningSimpleString": "FORRÓ!",
+    "WarningAdvancedString": "!! FORRÓ PÁKA !!",
+    "SleepingTipAdvancedString": "Páka:",
+    "IdleTipString": "Páka:",
+    "IdleSetString": " Cél:",
+    "TipDisconnectedString": "PÁKA LEVÉVE",
+    "SolderingAdvancedPowerPrompt": "Telj: ",
+    "OffString": "Ki",
+    "YourGainMessage": "Erősítés:"
+  },
+  "messagesWarn": {
+    "ResetOKMessage": ["Törlés OK", ""],
+    "SettingsResetMessage": ["Beállítások", "törölve!"],
+    "NoAccelerometerMessage": ["Nincs", "gyorsulásmérő!"],
+    "NoPowerDeliveryMessage": ["Nincs USB-PD IC!", ""],
+    "LockingKeysString": "LEZÁRVA",
+    "UnlockingKeysString": "FELOLDVA",
+    "WarningKeysLockedString": "!LEZÁRVA!",
+    "WarningThermalRunaway": ["Thermal", "Runaway"]
+  },
+  "characters": {
+    "SettingRightChar": "J",
+    "SettingLeftChar": "B",
+    "SettingAutoChar": "A",
+    "SettingOffChar": "0",
+    "SettingSlowChar": "L",
+    "SettingMediumChar": "K",
+    "SettingFastChar": "G",
+    "SettingStartNoneChar": "K",
+    "SettingStartSolderingChar": "F",
+    "SettingStartSleepChar": "A",
+    "SettingStartSleepOffChar": "S",
+    "SettingSensitivityOff": "0",
+    "SettingSensitivityLow": "A",
+    "SettingSensitivityMedium": "K",
+    "SettingSensitivityHigh": "M",
+    "SettingLockDisableChar": "K",
+    "SettingLockBoostChar": "B",
+    "SettingLockFullChar": "T",
+    "SettingNAChar": "N/A"
+  },
+  "menuGroups": {
+    "PowerMenu": {
+      "text2": ["Táp", "beállítások"],
+      "desc": "Táp beállítások"
+    },
+    "SolderingMenu": {
+      "text2": ["Forrasztási", "beállítások"],
+      "desc": "Forrasztási beállítások"
+    },
+    "PowerSavingMenu": {
+      "text2": ["Alvási", "módok"],
+      "desc": "Energiatakarékossági beállítások"
+    },
+    "UIMenu": {
+      "text2": ["Felhasználói", "felület"],
+      "desc": "Felhasználói felület beállításai"
+    },
+    "AdvancedMenu": {
+      "text2": ["Haladó", "beállítások"],
+      "desc": "Haladó beállítások"
+    }
+  },
+  "menuOptions": {
+    "DCInCutoff": {
+      "text2": ["Áram", "forrás"],
+      "desc": "Kikapcsolási feszültség beállítása (DC:10V | S:3.3V/LiPo cella)"
+    },
+    "SleepTemperature": {
+      "text2": ["Alvási", "hőmérséklet"],
+      "desc": "Hőmérséklet alvó módban (C | F)"
+    },
+    "SleepTimeout": {
+      "text2": ["Alvás", "időzítő"],
+      "desc": "Alvási időzítő (perc | másodperc)"
+    },
+    "ShutdownTimeout": {
+      "text2": ["Kikapcsolás", "időzítő"],
+      "desc": "Kikapcsolási időzítő (perc)"
+    },
+    "MotionSensitivity": {
+      "text2": ["Mozgás", "érzékenység"],
+      "desc": "Mozgás érzékenység beállítása (0=kikapcsolva | 1=legkevésbé érzékeny | ... | 9=legérzékenyebb)"
+    },
+    "TemperatureUnit": {
+      "text2": ["Hőmérséklet", "mértékegysége"],
+      "desc": "Hőmérséklet mértékegysége (C=Celsius | F=Fahrenheit)"
+    },
+    "AdvancedIdle": {
+      "text2": ["Részletes", "készenlét"],
+      "desc": "Részletes információk megjelenítése kisebb betűméretben a készenléti képernyőn"
+    },
+    "DisplayRotation": {
+      "text2": ["Kijelző", "tájolása"],
+      "desc": "Kijelző tájolása (J=jobbkezes | B=balkezes | A=automatikus)"
+    },
+    "BoostTemperature": {
+      "text2": ["Boost", "hőmérséklet"],
+      "desc": "Hőmérséklet \"boost\" módban"
+    },
+    "AutoStart": {
+      "text2": ["Automatikus", "indítás"],
+      "desc": "Bekapcsolás után automatikusan lépjen forrasztás módba (K=ki | F=forrasztás | A=alvó mód | S=szobahőmérséklet)"
+    },
+    "CooldownBlink": {
+      "text2": ["Villogás", "hűléskor"],
+      "desc": "Villogjon a hőmérséklet hűlés közben, amíg a páka forró"
+    },
+    "TemperatureCalibration": {
+      "text2": ["Hőmérséklet", "kalibrálása?"],
+      "desc": "Páka hőmérséklet-érzékelőjének kalibrálása"
+    },
+    "SettingsReset": {
+      "text2": ["Gyári", "beállítások?"],
+      "desc": "Beállítások alaphelyzetbe állítása"
+    },
+    "VoltageCalibration": {
+      "text2": ["Bemeneti fesz.", "kalibrálása?"],
+      "desc": "Bemeneti feszültség kalibrálása (röviden megnyomva módosítás, hosszan megnyomva kilépés)"
+    },
+    "AdvancedSoldering": {
+      "text2": ["Részletes", "forrasztás"],
+      "desc": "Részletes információk megjelenítése forrasztás közben"
+    },
+    "ScrollingSpeed": {
+      "text2": ["Görgetés", "sebessége"],
+      "desc": "Szöveggörgetés sebessége"
+    },
+    "QCMaxVoltage": {
+      "text2": ["Max. USB", "feszültség"],
+      "desc": "Maximális USB feszültség (QuickCharge)"
+    },
+    "PDNegTimeout": {
+      "text2": ["PD", "időtúllépés"],
+      "desc": "PD egyeztetési leidőzítés 100ms lépésekben megadva néhány QC töltővel való kompatibilitás érdekében (0: kikapcsolva)"
+    },
+    "PowerLimit": {
+      "text2": ["Teljesítmény", "maximum"],
+      "desc": "Maximális felvett teljesitmény beállitása"
+    },
+    "ReverseButtonTempChange": {
+      "text2": ["+/- gomb", "fordítva"],
+      "desc": "Páka hőmérséklet növelés/csökkentés gombok felcserélése"
+    },
+    "TempChangeShortStep": {
+      "text2": ["Hőm. váltás", "rövid"],
+      "desc": "Hőmérséklet váltás rövid gombnyomásra (C | F)"
+    },
+    "TempChangeLongStep": {
+      "text2": ["Hőm. váltás", "hosszú"],
+      "desc": "Hőmérséklet váltás hosszú gombnyomásra (C | F)"
+    },
+    "PowerPulsePower": {
+      "text2": ["Ébr. pulzus", "nagysága"],
+      "desc": "Powerbankot ébrentartó áramfelvételi pulzusok nagysága (W)"
+    },
+    "HallEffSensitivity": {
+      "text2": ["Alvásérzékelő", "érzékenység"],
+      "desc": "Alvásérzékelő gyorsulásmérő érzékenysége (0=ki | A=alacsony | K=közepes | M=magas)"
+    },
+    "LockingMode": {
+      "text2": ["Lezárás", "engedélyezés"],
+      "desc": "Forrasztás közben mindkét gombot hosszan lenyomva rögzíti a hőmérsékletet (K=ki | B=csak \"boost\" mód | T=teljes lezárás)"
+    },
+    "MinVolCell": {
+      "text2": ["Minimum", "feszültség"],
+      "desc": "Minimális engedélyezett cellafeszültség (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)"
+    },
+    "AnimLoop": {
+      "text2": ["Folytonos", "animáció"],
+      "desc": "Főmenü ikonjainak folytonos animációja"
+    },
+    "AnimSpeed": {
+      "text2": ["Animáció", "sebessége"],
+      "desc": "Menüikonok animációjának sebessége (0=ki | L=lassú | K=közepes | G=gyors)"
+    },
+    "PowerPulseWait": {
+      "text2": ["Ébr. pulzus", "időköze"],
+      "desc": "Powerbankot ébrentartó áramfelvételi pulzusok időköze (x2.5s)"
+    },
+    "PowerPulseDuration": {
+      "text2": ["Ébr. pulzus", "időtartama"],
+      "desc": "Powerbankot ébrentartó áramfelvételi pulzusok időtartama (x250ms)"
+    },
+    "LanguageSwitch": {
+      "text2": ["Nyelv:", " HU      Magyar"],
+      "desc": ""
+    },
+    "Brightness": {
+      "text2": ["Screen", "Brightness"],
+      "desc": "Adjust the contrast/brightness of the OLED screen"
+    },
+    "ColourInversion": {
+      "text2": ["Screen", "Invert"],
+      "desc": "Invert the colours of the OLED screen"
+    }
+  }
+}

Translations/translation_IT.json

@@ -0,0 +1,213 @@
+{
+  "languageCode": "IT",
+  "languageLocalName": "Italiano",
+  "fonts": ["ascii_basic", "latin_extended"],
+  "messages": {
+    "SettingsCalibrationDone": "Calibrazione effettuata",
+    "SettingsCalibrationWarning": "Assicurati che la punta si trovi a temperatura ambiente prima di continuare!",
+    "SettingsResetWarning": "Ripristinare le impostazioni iniziali?",
+    "UVLOWarningString": "DC BASSA",
+    "UndervoltageString": "DC INSUFFICIENTE",
+    "InputVoltageString": "V ingresso:",
+    "WarningTipTempString": "Temp punta:",
+    "BadTipString": "PUNTA KO",
+    "SleepingSimpleString": "Zzz ",
+    "SleepingAdvancedString": "Riposo",
+    "WarningSimpleString": "HOT!",
+    "WarningAdvancedString": "PUNTA CALDA!",
+    "SleepingTipAdvancedString": "Punta:",
+    "IdleTipString": "T punta:",
+    "IdleSetString": "/",
+    "TipDisconnectedString": "PUNTA ASSENTE",
+    "SolderingAdvancedPowerPrompt": "Potenz:",
+    "OffString": "OFF",
+    "YourGainMessage": "Guad.: "
+  },
+  "messagesWarn": {
+    "ResetOKMessage": "Reset OK",
+    "SettingsResetMessage": ["Impostazioni", "ripristinate"],
+    "NoAccelerometerMessage": ["Accelerometro", "non rilevato"],
+    "NoPowerDeliveryMessage": ["USB-PD non", "disponibile"],
+    "LockingKeysString": "Blocc.",
+    "UnlockingKeysString": "Sblocc.",
+    "WarningKeysLockedString": "BLOCCATO",
+    "WarningThermalRunaway": ["Thermal", "Runaway"]
+  },
+  "characters": {
+    "SettingRightChar": "D",
+    "SettingLeftChar": "S",
+    "SettingAutoChar": "A",
+    "SettingOffChar": "O",
+    "SettingSlowChar": "L",
+    "SettingMediumChar": "M",
+    "SettingFastChar": "V",
+    "SettingStartNoneChar": "D",
+    "SettingStartSolderingChar": "S",
+    "SettingStartSleepChar": "R",
+    "SettingStartSleepOffChar": "A",
+    "SettingSensitivityOff": "O",
+    "SettingSensitivityLow": "B",
+    "SettingSensitivityMedium": "M",
+    "SettingSensitivityHigh": "A",
+    "SettingLockDisableChar": "D",
+    "SettingLockBoostChar": "T",
+    "SettingLockFullChar": "C",
+    "SettingNAChar": "NA"
+  },
+  "menuGroups": {
+    "PowerMenu": {
+      "text2": ["Opzioni", "alimentaz"],
+      "desc": "Menù d'impostazioni per l'alimentazione"
+    },
+    "SolderingMenu": {
+      "text2": ["Opzioni", "saldatura"],
+      "desc": "Menù d'impostazioni della modalità Saldatura"
+    },
+    "PowerSavingMenu": {
+      "text2": ["Risparmio", "energetico"],
+      "desc": "Menù d'impostazioni per il risparmio energetico"
+    },
+    "UIMenu": {
+      "text2": ["Interfaccia", "utente"],
+      "desc": "Menù d'impostazioni dell'interfaccia utente"
+    },
+    "AdvancedMenu": {
+      "text2": ["Opzioni", "avanzate"],
+      "desc": "Menù d'impostazioni avanzate"
+    }
+  },
+  "menuOptions": {
+    "DCInCutoff": {
+      "text2": ["Sorgente", "alimentaz"],
+      "desc": "Imposta una tensione minima di alimentazione attraverso la selezione di una sorgente [DC: 10 V; 3S/4S/5S/6S: 3,3 V per cella]"
+    },
+    "SleepTemperature": {
+      "text2": ["Temp", "riposo"],
+      "desc": "Imposta la temperatura da mantenere in modalità Riposo [°C/°F]"
+    },
+    "SleepTimeout": {
+      "text2": ["Timer", "riposo"],
+      "desc": "Imposta il timer per entrare in modalità Riposo [minuti/secondi]"
+    },
+    "ShutdownTimeout": {
+      "text2": ["Timer", "spegnimento"],
+      "desc": "Imposta il timer per lo spegnimento [minuti]"
+    },
+    "MotionSensitivity": {
+      "text2": ["Sensibilità", "al movimento"],
+      "desc": "Imposta la sensibilità al movimento per uscire dalla modalità Riposo [0: nessuna; 1: minima; 9: massima]"
+    },
+    "TemperatureUnit": {
+      "text2": ["Unità di", "temperatura"],
+      "desc": "Scegli l'unità di misura per la temperatura [C: grado Celsius; F: grado Farenheit]"
+    },
+    "AdvancedIdle": {
+      "text2": ["Interfaccia", "testuale"],
+      "desc": "Mostra informazioni dettagliate all'interno della schermata principale"
+    },
+    "DisplayRotation": {
+      "text2": ["Orientamento", "display"],
+      "desc": "Imposta l'orientamento del display [D: mano destra; S: mano sinistra; A: automatico]"
+    },
+    "BoostTemperature": {
+      "text2": ["Temp", "Turbo"],
+      "desc": "Imposta la temperatura della funzione Turbo [°C/°F]"
+    },
+    "AutoStart": {
+      "text2": ["Avvio", "automatico"],
+      "desc": "Attiva automaticamente il saldatore quando viene alimentato [D: disattiva; S: saldatura; R: riposo; A: temperatura ambiente]"
+    },
+    "CooldownBlink": {
+      "text2": ["Avviso", "punta calda"],
+      "desc": "Evidenzia il valore di temperatura durante il raffreddamento se la punta è ancora calda"
+    },
+    "TemperatureCalibration": {
+      "text2": ["Calibrazione", "temperatura"],
+      "desc": "Calibra le rilevazioni di temperatura"
+    },
+    "SettingsReset": {
+      "text2": ["Ripristino", "impostazioni"],
+      "desc": "Ripristina tutte le impostazioni"
+    },
+    "VoltageCalibration": {
+      "text2": ["Calibrazione", "tensione"],
+      "desc": "Calibra la tensione in ingresso; regola con entrambi i tasti, tieni premuto il tasto superiore per uscire"
+    },
+    "AdvancedSoldering": {
+      "text2": ["Dettagli", "saldatura"],
+      "desc": "Mostra informazioni dettagliate durante la modalità Saldatura"
+    },
+    "ScrollingSpeed": {
+      "text2": ["Velocità", "testo"],
+      "desc": "Imposta la velocità di scorrimento del testo [L: lenta; V: veloce]"
+    },
+    "QCMaxVoltage": {
+      "text2": ["Voltaggio", "QC"],
+      "desc": "Imposta il massimo voltaggio negoziabile con un alimentatore Quick Charge"
+    },
+    "PDNegTimeout": {
+      "text2": ["PD", "timeout"],
+      "desc": "PD negotiation timeout in 100ms steps for compatibility with some QC chargers (0: disabled)"
+    },
+    "PowerLimit": {
+      "text2": ["Limite", "potenza"],
+      "desc": "Imposta il valore di potenza massima erogabile al saldatore [watt]"
+    },
+    "ReverseButtonTempChange": {
+      "text2": ["Inversione", "tasti"],
+      "desc": "Inverti i tasti per aumentare o diminuire la temperatura della punta"
+    },
+    "TempChangeShortStep": {
+      "text2": ["Temp passo", "breve"],
+      "desc": "Imposta il \"passo\" dei valori di temperatura per una breve pressione dei tasti"
+    },
+    "TempChangeLongStep": {
+      "text2": ["Temp passo", "lungo"],
+      "desc": "Imposta il \"passo\" dei valori di temperatura per una lunga pressione dei tasti"
+    },
+    "PowerPulsePower": {
+      "text2": ["Potenza", "impulso"],
+      "desc": "Regola la potenza di un \"impulso sveglia\" atto a prevenire lo standby eventuale dell'alimentatore [watt]"
+    },
+    "HallEffSensitivity": {
+      "text2": ["Effetto", "Hall"],
+      "desc": "Regola la sensibilità alla rilevazione di supporti metallici per entrare in modalità Riposo [O: OFF; B: bassa; M: media; A: alta]"
+    },
+    "LockingMode": {
+      "text2": ["Blocco", "tasti"],
+      "desc": "Blocca i tasti durante la modalità Saldatura; tieni premuto entrambi per bloccare o sbloccare [D: disattiva; T: consenti Turbo; C: blocco completo]"
+    },
+    "MinVolCell": {
+      "text2": ["Tensione", "min celle"],
+      "desc": "Modifica la tensione di minima carica delle celle di una batteria Li-Po [3S: 3,0-3,7 V; 4S/5S/6S: 2,4-3,7 V]"
+    },
+    "AnimLoop": {
+      "text2": ["Ciclo", "animazioni"],
+      "desc": "Abilita la riproduzione ciclica delle animazioni del menù principale"
+    },
+    "AnimSpeed": {
+      "text2": ["Velocità", "animazioni"],
+      "desc": "Imposta la velocità di riproduzione delle animazioni del menù principale [O: OFF; L: lenta; M: media; V: veloce]"
+    },
+    "PowerPulseWait": {
+      "text2": ["Distanza", "impulsi"],
+      "desc": "Imposta il tempo che deve intercorrere tra due \"impulsi sveglia\" [multipli di 2,5 s]"
+    },
+    "PowerPulseDuration": {
+      "text2": ["Durata", "impulso"],
+      "desc": "Regola la durata dell'«impulso sveglia» [multipli di 250 ms]"
+    },
+    "LanguageSwitch": {
+      "text2": ["Lingua:", " IT    Italiano"],
+      "desc": ""
+    },
+    "Brightness": {
+      "text2": ["Screen", "Brightness"],
+      "desc": "Adjust the contrast/brightness of the OLED screen"
+    },
+    "ColourInversion": {
+      "text2": ["Screen", "Invert"],
+      "desc": "Invert the colours of the OLED screen"
+    }
+  }
+}

Translations/translation_JA_JP.json

@@ -0,0 +1,214 @@
+{
+  "languageCode": "JA_JP",
+  "languageLocalName": "日本語",
+  "fonts": ["ascii_basic", "cjk"],
+  "tempUnitFahrenheit": true,
+  "messages": {
+    "SettingsCalibrationDone": "校正完了",
+    "SettingsCalibrationWarning": "続行する前に、コテ先が室温と同じになっていることを確認してください",
+    "SettingsResetWarning": "設定をリセットしますか？",
+    "UVLOWarningString": "電圧が低すぎます",
+    "UndervoltageString": "Undervoltage",
+    "InputVoltageString": "Input V: ",
+    "WarningTipTempString": "Tip temp: ",
+    "BadTipString": "BAD TIP",
+    "SleepingSimpleString": "Zzzz",
+    "SleepingAdvancedString": "Sleeping...",
+    "WarningSimpleString": "HOT!",
+    "WarningAdvancedString": "!!! HOT TIP !!!",
+    "SleepingTipAdvancedString": "Tip:",
+    "IdleTipString": "Tip:",
+    "IdleSetString": " Set:",
+    "TipDisconnectedString": "NO TIP",
+    "SolderingAdvancedPowerPrompt": "Power: ",
+    "OffString": "オフ",
+    "YourGainMessage": "Your gain:"
+  },
+  "messagesWarn": {
+    "ResetOKMessage": "リセットOK",
+    "SettingsResetMessage": "初期化されました",
+    "NoAccelerometerMessage": "加速度計未検出",
+    "NoPowerDeliveryMessage": "PD IC未検出",
+    "LockingKeysString": "ボタンロック",
+    "UnlockingKeysString": "ロックを解除",
+    "WarningKeysLockedString": "!入力ロック中!",
+    "WarningThermalRunaway": "過熱"
+  },
+  "characters": {
+    "SettingRightChar": "右",
+    "SettingLeftChar": "左",
+    "SettingAutoChar": "自",
+    "SettingOffChar": "×",
+    "SettingSlowChar": "遅",
+    "SettingMediumChar": "中",
+    "SettingFastChar": "速",
+    "SettingStartNoneChar": "×",
+    "SettingStartSolderingChar": "熱",
+    "SettingStartSleepChar": "待",
+    "SettingStartSleepOffChar": "室",
+    "SettingSensitivityOff": "×",
+    "SettingSensitivityLow": "低",
+    "SettingSensitivityMedium": "中",
+    "SettingSensitivityHigh": "高",
+    "SettingLockDisableChar": "×",
+    "SettingLockBoostChar": "ブ",
+    "SettingLockFullChar": "全",
+    "SettingNAChar": "非適用"
+  },
+  "menuGroups": {
+    "PowerMenu": {
+      "text2": "電源設定",
+      "desc": "電源設定"
+    },
+    "SolderingMenu": {
+      "text2": "半田付け設定",
+      "desc": "半田付け設定"
+    },
+    "PowerSavingMenu": {
+      "text2": "待機設定",
+      "desc": "待機設定"
+    },
+    "UIMenu": {
+      "text2": "UI設定",
+      "desc": "ユーザーインターフェイスの設定"
+    },
+    "AdvancedMenu": {
+      "text2": "高度な設定",
+      "desc": "高度な設定"
+    }
+  },
+  "menuOptions": {
+    "DCInCutoff": {
+      "text2": "下限電圧",
+      "desc": "下限電圧を指定する <DC=10V | S=セルあたり3.3V、電力制限を無効化>"
+    },
+    "SleepTemperature": {
+      "text2": "待機温度",
+      "desc": "スタンバイ時のコテ先温度"
+    },
+    "SleepTimeout": {
+      "text2": "待機遅延",
+      "desc": "スタンバイモードに入るまでの待機時間 <S=秒 | M=分>"
+    },
+    "ShutdownTimeout": {
+      "text2": "自動オフ",
+      "desc": "自動電源オフまでの待機時間 <M=分>"
+    },
+    "MotionSensitivity": {
+      "text2": "動きの感度",
+      "desc": "0=オフ | 1=最低感度 | ... | 9=最高感度"
+    },
+    "TemperatureUnit": {
+      "text2": "温度単位",
+      "desc": "C=摂氏 | F=華氏"
+    },
+    "AdvancedIdle": {
+      "text2": "詳細な待受画面",
+      "desc": "待ち受け画面に詳細情報を表示する"
+    },
+    "DisplayRotation": {
+      "text2": "画面の向き",
+      "desc": "右=右利き | 左=左利き | 自=自動"
+    },
+    "BoostTemperature": {
+      "text2": "ブースト温度",
+      "desc": "ブーストモードで使用される温度"
+    },
+    "AutoStart": {
+      "text2": "自動加熱",
+      "desc": "電源投入時に自動的に加熱する <×=オフ | 熱=半田付けモード | 待=スタンバイモード | 室=室温スタンバイモード>"
+    },
+    "CooldownBlink": {
+      "text2": "冷却中に点滅",
+      "desc": "加熱の停止後、コテ先が熱い間は温度表示を点滅する"
+    },
+    "TemperatureCalibration": {
+      "text2": "温度校正",
+      "desc": "コテ先の温度校正を開始する"
+    },
+    "SettingsReset": {
+      "text2": "設定をリセット",
+      "desc": "すべての設定を初期化する"
+    },
+    "VoltageCalibration": {
+      "text2": "電圧校正",
+      "desc": "入力電圧(VIN)の校正を開始する <長押しで終了>"
+    },
+    "AdvancedSoldering": {
+      "text2": "詳細な作業画面",
+      "desc": "半田付け画面に詳細情報を表示する"
+    },
+    "ScrollingSpeed": {
+      "text2": "スクロール速度",
+      "desc": "テキストをスクロールする速さ <遅=遅い | 速=速い>"
+    },
+    "QCMaxVoltage": {
+      "text2": "QC電圧",
+      "desc": "QC電源使用時に要求する目標電圧"
+    },
+    "PDNegTimeout": {
+      "text2": ["PD", "timeout"],
+      "desc": "一部のQC電源との互換性のため、PDネゴシエーションをタイムアウトする時間 <x100ms（ミリ秒）>"
+    },
+    "PowerLimit": {
+      "text2": "電力制限",
+      "desc": "最大電力を制限する <W=ワット>"
+    },
+    "ReverseButtonTempChange": {
+      "text2": "キー入れ替え",
+      "desc": "温度設定時に+ボタンと-ボタンを入れ替える"
+    },
+    "TempChangeShortStep": {
+      "text2": "温度変化 短",
+      "desc": "ボタンを短く押した時の温度変化値"
+    },
+    "TempChangeLongStep": {
+      "text2": "温度変化 長",
+      "desc": "ボタンを長押しした時の温度変化値"
+    },
+    "PowerPulsePower": {
+      "text2": "電力パルス",
+      "desc": "電源をオンに保つための電力パルス <ワット>"
+    },
+    "HallEffSensitivity": {
+      "text2": "磁界感度",
+      "desc": "スタンバイモードに入るのに使用される磁場センサーの感度 <×=オフ | 低=最低感度 | 中=中程度の感度 | 高=最高感度>"
+    },
+    "LockingMode": {
+      "text2": "ボタンロック",
+      "desc": "半田付けモード時に両方のボタンを長押しし、ボタンロックする <×=オフ | ブ=ブーストのみ許可 | 全=すべてをロック>"
+    },
+    "MinVolCell": {
+      "text2": "最低電圧",
+      "desc": "セルあたりの最低電圧 <ボルト> <3S: 3.0V - 3.7V, 4/5/6S: 2.4V - 3.7V>"
+    },
+    "AnimLoop": {
+      "text2": "動画をループ",
+      "desc": "メニューアイコンのアニメーションをループする"
+    },
+    "AnimSpeed": {
+      "text2": "動画の速度",
+      "desc": "メニューアイコンのアニメーションの速さ <×=再生しない | 遅=低速 | 中=中速 | 速=高速>"
+    },
+    "PowerPulseWait": {
+      "text2": "パルス間隔",
+      "desc": "電源をオンに保つための電力パルスの時間間隔 <x2.5s（秒）>"
+    },
+    "PowerPulseDuration": {
+      "text2": "パルス時間長",
+      "desc": "電源をオンに保つための電力パルスの時間長 <x250ms（ミリ秒）>"
+    },
+    "LanguageSwitch": {
+      "text2": "言語： 日本語",
+      "desc": ""
+    },
+    "Brightness": {
+      "text2": "画面輝度",
+      "desc": "画面の明るさ・コントラストを変更する"
+    },
+    "ColourInversion": {
+      "text2": "色反転",
+      "desc": "画面の色を反転する"
+    }
+  }
+}

Translations/translation_LT.json

@@ -0,0 +1,213 @@
+{
+  "languageCode": "LT",
+  "languageLocalName": "Lietuvių",
+  "fonts": ["ascii_basic", "latin_extended"],
+  "messages": {
+    "SettingsCalibrationDone": "Kalibravimas atliktas!",
+    "SettingsCalibrationWarning": "Prieš tęsdami įsitikinkite, kad antgalis yra kambario temperatūros!",
+    "SettingsResetWarning": "Ar norite atstatyti nustatymus į numatytas reikšmes?",
+    "UVLOWarningString": "MAŽ VOLT",
+    "UndervoltageString": "Žema įtampa",
+    "InputVoltageString": "Įvestis V: ",
+    "WarningTipTempString": "Angal Temp: ",
+    "BadTipString": "BLOG ANT",
+    "SleepingSimpleString": "Zzzz",
+    "SleepingAdvancedString": "Miegu...",
+    "WarningSimpleString": "KRŠ!",
+    "WarningAdvancedString": "ANTGALIS KARŠTAS",
+    "SleepingTipAdvancedString": "Antg: ",
+    "IdleTipString": "Ant:",
+    "IdleSetString": " Nust:",
+    "TipDisconnectedString": "NĖRA ANTGALIO",
+    "SolderingAdvancedPowerPrompt": "Galia: ",
+    "OffString": "Išj",
+    "YourGainMessage": "Greitis:"
+  },
+  "messagesWarn": {
+    "ResetOKMessage": "Atstatytas OK",
+    "SettingsResetMessage": ["Nust. atstatyti!", ""],
+    "NoAccelerometerMessage": ["Nerastas", "akselerometras!"],
+    "NoPowerDeliveryMessage": ["Nerastas", "USB-PD IC !"],
+    "LockingKeysString": " UŽRAKIN",
+    "UnlockingKeysString": "ATRAKIN",
+    "WarningKeysLockedString": "!UŽRAK!",
+    "WarningThermalRunaway": ["Thermal", "Runaway"]
+  },
+  "characters": {
+    "SettingRightChar": "D",
+    "SettingLeftChar": "K",
+    "SettingAutoChar": "A",
+    "SettingOffChar": "I",
+    "SettingSlowChar": "L",
+    "SettingMediumChar": "V",
+    "SettingFastChar": "G",
+    "SettingStartNoneChar": "N",
+    "SettingStartSolderingChar": "T",
+    "SettingStartSleepChar": "M",
+    "SettingStartSleepOffChar": "K",
+    "SettingSensitivityOff": "I",
+    "SettingSensitivityLow": "Ž",
+    "SettingSensitivityMedium": "V",
+    "SettingSensitivityHigh": "A",
+    "SettingLockDisableChar": "I",
+    "SettingLockBoostChar": "T",
+    "SettingLockFullChar": "V",
+    "SettingNAChar": "N/A"
+  },
+  "menuGroups": {
+    "PowerMenu": {
+      "text2": ["Maitinimo", "nustatymai"],
+      "desc": "Su maitinblokiu susiję nustatymai"
+    },
+    "SolderingMenu": {
+      "text2": ["Litavimo", "nustatymai"],
+      "desc": "Litavimo nustatymai"
+    },
+    "PowerSavingMenu": {
+      "text2": ["Miego", "režimai"],
+      "desc": "Energijos tausojimo nustatymai"
+    },
+    "UIMenu": {
+      "text2": ["Naudotojo", "sąsaja"],
+      "desc": "Naudotojo sąsajos nustatymai"
+    },
+    "AdvancedMenu": {
+      "text2": ["Išplėsti.", "nustatymai"],
+      "desc": "Išplėstiniai nustatymai"
+    }
+  },
+  "menuOptions": {
+    "DCInCutoff": {
+      "text2": ["Maitinimo", "šaltinis"],
+      "desc": "Išjungimo įtampa. (DC 10V) (arba celių [S] kiekis [3.3V per celę])"
+    },
+    "SleepTemperature": {
+      "text2": ["Miego", "temperat."],
+      "desc": "Miego temperatūra"
+    },
+    "SleepTimeout": {
+      "text2": ["Miego", "laikas"],
+      "desc": "Užmigimo laikas (sekundės | minutės)"
+    },
+    "ShutdownTimeout": {
+      "text2": ["Išjungimo", "laikas"],
+      "desc": "Išjungimo laikas (minutės)"
+    },
+    "MotionSensitivity": {
+      "text2": ["Judesio", "jautrumas"],
+      "desc": "Judesio jautrumas (0=Išjungta | 1=Mažiausias | ... | 9=Didžiausias)"
+    },
+    "TemperatureUnit": {
+      "text2": ["Temperatūros", "vienetai"],
+      "desc": "Temperatūros vienetai (C=Celsijus | F=Farenheitas)"
+    },
+    "AdvancedIdle": {
+      "text2": ["Detalus lau-", "kimo ekranas"],
+      "desc": "Ar rodyti papildomą informaciją mažesniu šriftu laukimo ekrane"
+    },
+    "DisplayRotation": {
+      "text2": ["Ekrano", "orientacija"],
+      "desc": "Ekrano orientacija (D=Dešiniarankiams | K=Kairiarankiams | A=Automatinė)"
+    },
+    "BoostTemperature": {
+      "text2": ["Turbo", "temperat."],
+      "desc": "Temperatūra turbo režimu"
+    },
+    "AutoStart": {
+      "text2": ["Automatinis", "paleidimas"],
+      "desc": "Ar pradėti kaitininti iš karto įjungus lituoklį (N=Ne | T=Taip | M=Miegas | K=Miegoti kambario temperatūroje)"
+    },
+    "CooldownBlink": {
+      "text2": ["Atvėsimo", "mirksėjimas"],
+      "desc": "Ar mirksėti temperatūrą ekrane kol vėstantis antgalis vis dar karštas?"
+    },
+    "TemperatureCalibration": {
+      "text2": ["Kalibruoti", "temperatūrą?"],
+      "desc": "Antgalio temperatūros kalibravimas"
+    },
+    "SettingsReset": {
+      "text2": ["Atstatyti", "nustatymus?"],
+      "desc": "Nustato nustatymus į numatytuosius"
+    },
+    "VoltageCalibration": {
+      "text2": ["Kalibruoti", "įvesties įtampą?"],
+      "desc": "Įvesties įtampos kalibravimas. Trumpai paspauskite, norėdami nustatyti, ilgai paspauskite, kad išeitumėte."
+    },
+    "AdvancedSoldering": {
+      "text2": ["Detalus lita-", "vimo ekranas"],
+      "desc": "Ar rodyti išsamią informaciją lituojant"
+    },
+    "ScrollingSpeed": {
+      "text2": ["Aprašymo", "greitis"],
+      "desc": "Greitis, kuriuo šis tekstas slenka"
+    },
+    "QCMaxVoltage": {
+      "text2": ["QC mait.", "įtampa"],
+      "desc": "Maksimali QC maitinimo bloko įtampa"
+    },
+    "PDNegTimeout": {
+      "text2": ["PD", "timeout"],
+      "desc": "PD negotiation timeout in 100ms steps for compatibility with some QC chargers (0: disabled)"
+    },
+    "PowerLimit": {
+      "text2": ["Galios", "riba"],
+      "desc": "Didžiausia galia, kurią gali naudoti lituoklis (Vatai)"
+    },
+    "ReverseButtonTempChange": {
+      "text2": ["Sukeisti + -", "mygtukus?"],
+      "desc": "Sukeisti + - temperatūros keitimo mygtukus vietomis."
+    },
+    "TempChangeShortStep": {
+      "text2": ["Temp.keitim.", "trump.spust."],
+      "desc": "Temperatūros keitimo žingsnis trumpai spustėlėjus mygtuką!"
+    },
+    "TempChangeLongStep": {
+      "text2": ["Temp.keitim.", "ilgas pasp."],
+      "desc": "Temperatūros keitimo žingsnis ilgai paspaudus mygtuką!"
+    },
+    "PowerPulsePower": {
+      "text2": ["Galios", "pulso W"],
+      "desc": "Periodinis galios pulso intensyvumas maitinblokiui, neleidžiantis jam užmigti."
+    },
+    "HallEffSensitivity": {
+      "text2": ["Holo", "jutiklis"],
+      "desc": "Holo jutiklio jautrumas nustatant miegą (I=Išjungtas | Ž=Žemas | V=Vidutinis | A=Aukštas)"
+    },
+    "LockingMode": {
+      "text2": ["Mygtukų", "užraktas"],
+      "desc": "Lituodami, ilgai paspauskite abu mygtukus, kad juos užrakintumėte (I=Išjungta | T=leidžiamas tik Turbo režimas | V=Visiškas užrakinimas)"
+    },
+    "MinVolCell": {
+      "text2": ["Minimalus", "voltažas"],
+      "desc": "Minimalus voltažas, kuris yra leidžiamas kiekvienam baterijos elementui (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)"
+    },
+    "AnimLoop": {
+      "text2": ["Animacijų", "pakartojimas"],
+      "desc": "Leidžia kartoti animacijas be sustojimo pagrindiniame meniu."
+    },
+    "AnimSpeed": {
+      "text2": ["Animacijų", "greitis"],
+      "desc": "Paveiksliukų animacijų greitis meniu punktuose (I=Išjungtas | L=Lėtas | V=Vidutinis | G=Greitas)"
+    },
+    "PowerPulseWait": {
+      "text2": ["Galios pulso", "dažnumas"],
+      "desc": "Pasikartojantis laiko intervalas (x 2.5s), ties kuriuo kartojamas galios pulsas maitinblokiui, neleidžiantis jam užmigti."
+    },
+    "PowerPulseDuration": {
+      "text2": ["Galios pulso", "trukmė"],
+      "desc": "Galios pulso aktyvioji trukmė (x 250ms)"
+    },
+    "LanguageSwitch": {
+      "text2": ["Kalba:", " LT    Lietuvių"],
+      "desc": ""
+    },
+    "Brightness": {
+      "text2": ["Screen", "Brightness"],
+      "desc": "Adjust the contrast/brightness of the OLED screen"
+    },
+    "ColourInversion": {
+      "text2": ["Screen", "Invert"],
+      "desc": "Invert the colours of the OLED screen"
+    }
+  }
+}

Translations/translation_NL.json

@@ -0,0 +1,213 @@
+{
+  "languageCode": "NL",
+  "languageLocalName": "Nederlands",
+  "fonts": ["ascii_basic", "latin_extended"],
+  "messages": {
+    "SettingsCalibrationDone": "Calibratie klaar!",
+    "SettingsCalibrationWarning": "Zorg ervoor dat te punt op kamertemperatuur is voor je verder gaat!",
+    "SettingsResetWarning": "Weet je zeker dat je de fabrieksinstellingen terug wil zetten?",
+    "UVLOWarningString": "DC Laag",
+    "UndervoltageString": "Onderspanning",
+    "InputVoltageString": "Input V: ",
+    "WarningTipTempString": "Punt temp: ",
+    "BadTipString": "DEFECTE PUNT",
+    "SleepingSimpleString": "Zzzz",
+    "SleepingAdvancedString": "Slaapstand...",
+    "WarningSimpleString": "HEET!",
+    "WarningAdvancedString": "!!! PUNT HOT !!!",
+    "SleepingTipAdvancedString": "Punt:",
+    "IdleTipString": "Punt:",
+    "IdleSetString": " Zet:",
+    "TipDisconnectedString": "PUNT LOSGEKOPPELT",
+    "SolderingAdvancedPowerPrompt": "Vermogen: ",
+    "OffString": "Uit",
+    "YourGainMessage": "Niveau:"
+  },
+  "messagesWarn": {
+    "ResetOKMessage": "Reset OK",
+    "SettingsResetMessage": ["Instellingen", "zijn gereset!"],
+    "NoAccelerometerMessage": ["No accelerometer", "detected!"],
+    "NoPowerDeliveryMessage": ["No USB-PD IC", "detected!"],
+    "LockingKeysString": " GEBLOKKEERD",
+    "UnlockingKeysString": "GEDEBLOKKEERD",
+    "WarningKeysLockedString": "!GEBLOKKEERD!",
+    "WarningThermalRunaway": ["Thermal", "Runaway"]
+  },
+  "characters": {
+    "SettingRightChar": "R",
+    "SettingLeftChar": "L",
+    "SettingAutoChar": "A",
+    "SettingOffChar": "O",
+    "SettingSlowChar": "S",
+    "SettingMediumChar": "M",
+    "SettingFastChar": "F",
+    "SettingStartNoneChar": "F",
+    "SettingStartSolderingChar": "T",
+    "SettingStartSleepChar": "S",
+    "SettingStartSleepOffChar": "K",
+    "SettingSensitivityOff": "O",
+    "SettingSensitivityLow": "L",
+    "SettingSensitivityMedium": "M",
+    "SettingSensitivityHigh": "H",
+    "SettingLockDisableChar": "U",
+    "SettingLockBoostChar": "B",
+    "SettingLockFullChar": "V",
+    "SettingNAChar": "N/A"
+  },
+  "menuGroups": {
+    "PowerMenu": {
+      "text2": ["Power", "settings"],
+      "desc": "Power settings"
+    },
+    "SolderingMenu": {
+      "text2": ["Soldeer", "Instellingen"],
+      "desc": "Soldeer instellingen"
+    },
+    "PowerSavingMenu": {
+      "text2": ["Slaap", "Modes"],
+      "desc": "Stroom besparings instellingen"
+    },
+    "UIMenu": {
+      "text2": ["Gebruikers-", "interface"],
+      "desc": "Gebruikers-interface instellingen"
+    },
+    "AdvancedMenu": {
+      "text2": ["Geavanceerde", "Instellingen"],
+      "desc": "Geavanceerde Instellingen"
+    }
+  },
+  "menuOptions": {
+    "DCInCutoff": {
+      "text2": ["Spannings-", "bron"],
+      "desc": "Spanningsbron. Stelt drempelspanning in. (DC 10V) (S 3.3V per cel)"
+    },
+    "SleepTemperature": {
+      "text2": ["Slaap", "temp"],
+      "desc": "Temperatuur in slaapstand"
+    },
+    "SleepTimeout": {
+      "text2": ["Slaap", "time-out"],
+      "desc": "Slaap time-out (Minuten | Seconden)"
+    },
+    "ShutdownTimeout": {
+      "text2": ["Uitschakel", "time-out"],
+      "desc": "Automatisch afsluiten time-out (Minuten)"
+    },
+    "MotionSensitivity": {
+      "text2": ["Bewegings-", "gevoeligheid"],
+      "desc": "Bewegingsgevoeligheid (0=uit | 1=minst gevoelig | ... | 9=meest gevoelig)"
+    },
+    "TemperatureUnit": {
+      "text2": ["Temperatuur", "eenheid"],
+      "desc": "Temperatuureenheid (C=Celsius | F=Fahrenheit)"
+    },
+    "AdvancedIdle": {
+      "text2": ["Gedetailleerd", "startscherm"],
+      "desc": "Gedetailleerde informatie weergeven in een kleiner lettertype op het startscherm."
+    },
+    "DisplayRotation": {
+      "text2": ["Scherm-", "oriëntatie"],
+      "desc": "Schermoriëntatie (R=Rechtshandig | L=Linkshandig | A=Automatisch)"
+    },
+    "BoostTemperature": {
+      "text2": ["Boost", "temp"],
+      "desc": "Temperatuur in boostmode"
+    },
+    "AutoStart": {
+      "text2": ["Auto", "start"],
+      "desc": "Breng de soldeerbout direct op temperatuur bij het opstarten. (F=Uit | T=Soldeertemperatuur | S=Slaapstand-temperatuur | K=Slaapstand kamertemperatuur)"
+    },
+    "CooldownBlink": {
+      "text2": ["Afkoel", "flikker"],
+      "desc": "Temperatuur laten flikkeren in het hoofdmenu als de soldeerpunt aan het afkoelen is."
+    },
+    "TemperatureCalibration": {
+      "text2": ["Calibreer", "temperatuur?"],
+      "desc": "Temperatuursafwijking van de soldeerpunt calibreren."
+    },
+    "SettingsReset": {
+      "text2": ["Instellingen", "resetten?"],
+      "desc": "Alle instellingen terugzetten."
+    },
+    "VoltageCalibration": {
+      "text2": ["Calibreer", "input-voltage?"],
+      "desc": "VIN Calibreren. (druk lang om te sluiten)."
+    },
+    "AdvancedSoldering": {
+      "text2": ["Gedetailleerd", "soldeerscherm"],
+      "desc": "Gedetailleerde informatie weergeven in een kleiner lettertype op het soldeerscherm."
+    },
+    "ScrollingSpeed": {
+      "text2": ["Scroll", "snelheid"],
+      "desc": "Snelheid waarmee de tekst scrolt."
+    },
+    "QCMaxVoltage": {
+      "text2": ["Power", "Wattage"],
+      "desc": "Wattage van de gebruikte voeding"
+    },
+    "PDNegTimeout": {
+      "text2": ["PD", "timeout"],
+      "desc": "PD negotiation timeout in 100ms steps for compatibility with some QC chargers (0: disabled)"
+    },
+    "PowerLimit": {
+      "text2": ["Vermogen", "limiet"],
+      "desc": "Maximaal vermogen (Watts)"
+    },
+    "ReverseButtonTempChange": {
+      "text2": ["Draai", "+ - knoppen om"],
+      "desc": "Keer de +- knoppen om de termperatuur van de punt te regelen om."
+    },
+    "TempChangeShortStep": {
+      "text2": ["Temp veranderen", "kort"],
+      "desc": "Temperatuur verandering bij kort drukken"
+    },
+    "TempChangeLongStep": {
+      "text2": ["Temp veranderen", "lang"],
+      "desc": "Temperatuur verandering bij lang drukken"
+    },
+    "PowerPulsePower": {
+      "text2": ["Vermogen", "Puls W"],
+      "desc": "Vermogen van puls om soldeerbout aan te houden"
+    },
+    "HallEffSensitivity": {
+      "text2": ["Hall Eff", "Sensitivity"],
+      "desc": "Sensitivity of the Hall effect sensor in detecting sleep (O=Off | L=Low | M=Medium | H=High)"
+    },
+    "LockingMode": {
+      "text2": ["Blokkeer", "knoppen"],
+      "desc": "Tijdens solderen lang op beide knoppen drukken, blokkeert ze. (U=Uit | B=Alleen boost | V=Volledig blokkeren)"
+    },
+    "MinVolCell": {
+      "text2": ["Minimum", "voltage"],
+      "desc": "Minimum allowed voltage per cell (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)"
+    },
+    "AnimLoop": {
+      "text2": ["Anim.", "loop"],
+      "desc": "Loop icon animations in root menu"
+    },
+    "AnimSpeed": {
+      "text2": ["Anim.", "speed"],
+      "desc": "Speed of icon animations in menu (O=off | L=low | M=medium | H=high)"
+    },
+    "PowerPulseWait": {
+      "text2": ["Power pulse", "wait time"],
+      "desc": "Time to wait before triggering every keep-awake pulse (x 2.5s)"
+    },
+    "PowerPulseDuration": {
+      "text2": ["Power pulse", "duration"],
+      "desc": "Keep-awake-pulse duration (x 250ms)"
+    },
+    "LanguageSwitch": {
+      "text2": ["Spraak :", " NL  Nederlands"],
+      "desc": ""
+    },
+    "Brightness": {
+      "text2": ["Screen", "Brightness"],
+      "desc": "Adjust the contrast/brightness of the OLED screen"
+    },
+    "ColourInversion": {
+      "text2": ["Screen", "Invert"],
+      "desc": "Invert the colours of the OLED screen"
+    }
+  }
+}

Translations/translation_NL_BE.json

@@ -0,0 +1,213 @@
+{
+  "languageCode": "NL_BE",
+  "languageLocalName": "Vlaams",
+  "fonts": ["ascii_basic", "latin_extended"],
+  "messages": {
+    "SettingsCalibrationDone": "Gecalibreerd!",
+    "SettingsCalibrationWarning": "Zorg vooraf dat de punt op kamertemperatuur is!",
+    "SettingsResetWarning": "Ben je zeker dat je alle standaardwaarden wil resetten?",
+    "UVLOWarningString": "Voedingsspanning LAAG",
+    "UndervoltageString": "Onderspanning",
+    "InputVoltageString": "Voedingsspanning: ",
+    "WarningTipTempString": "Punt Temp: ",
+    "BadTipString": "DEFECT",
+    "SleepingSimpleString": "Zzz ",
+    "SleepingAdvancedString": "Slaapstand...",
+    "WarningSimpleString": "HEET",
+    "WarningAdvancedString": "!!! PUNT HEET !!!",
+    "SleepingTipAdvancedString": "Punt:",
+    "IdleTipString": "Punt:",
+    "IdleSetString": "Stel in:",
+    "TipDisconnectedString": "Punt ONTKOPPELD",
+    "SolderingAdvancedPowerPrompt": "Vermogen: ",
+    "OffString": "Uit",
+    "YourGainMessage": "Your gain:"
+  },
+  "messagesWarn": {
+    "ResetOKMessage": "Reset OK",
+    "SettingsResetMessage": ["Settings were", "reset!"],
+    "NoAccelerometerMessage": ["No accelerometer", "detected!"],
+    "NoPowerDeliveryMessage": ["No USB-PD IC", "detected!"],
+    "LockingKeysString": " LOCKED",
+    "UnlockingKeysString": "UNLOCKED",
+    "WarningKeysLockedString": "!LOCKED!",
+    "WarningThermalRunaway": ["Thermal", "Runaway"]
+  },
+  "characters": {
+    "SettingRightChar": "R",
+    "SettingLeftChar": "L",
+    "SettingAutoChar": "A",
+    "SettingOffChar": "O",
+    "SettingSlowChar": "T",
+    "SettingMediumChar": "M",
+    "SettingFastChar": "S",
+    "SettingStartNoneChar": "F",
+    "SettingStartSolderingChar": "T",
+    "SettingStartSleepChar": "S",
+    "SettingStartSleepOffChar": "K",
+    "SettingSensitivityOff": "O",
+    "SettingSensitivityLow": "L",
+    "SettingSensitivityMedium": "M",
+    "SettingSensitivityHigh": "H",
+    "SettingLockDisableChar": "D",
+    "SettingLockBoostChar": "B",
+    "SettingLockFullChar": "F",
+    "SettingNAChar": "N/A"
+  },
+  "menuGroups": {
+    "PowerMenu": {
+      "text2": ["Power", "settings"],
+      "desc": "Power settings"
+    },
+    "SolderingMenu": {
+      "text2": ["Soldeer", "Instellingen"],
+      "desc": "Soldeerinstellingen"
+    },
+    "PowerSavingMenu": {
+      "text2": ["Slaap", "standen"],
+      "desc": "Batterijspaarstanden"
+    },
+    "UIMenu": {
+      "text2": ["Gebruikers-", "Interface"],
+      "desc": "Gebruikersinterface Instellingen"
+    },
+    "AdvancedMenu": {
+      "text2": ["Gevorderde", "Instellingen"],
+      "desc": "Gevorderde Instellingen"
+    }
+  },
+  "menuOptions": {
+    "DCInCutoff": {
+      "text2": ["Spannings-", "bron"],
+      "desc": "Spanningsbron. Stelt minimumspanning in. (DC 10V) (S 3.3V per cel)"
+    },
+    "SleepTemperature": {
+      "text2": ["Slaap", "temp"],
+      "desc": "Temperatuur in slaapstand (°C)"
+    },
+    "SleepTimeout": {
+      "text2": ["Slaap", "time-out"],
+      "desc": "Slaapstand time-out (Minuten | Seconden)"
+    },
+    "ShutdownTimeout": {
+      "text2": ["Uitschakel", "time-out"],
+      "desc": "Automatisch afsluiten time-out (Minuten)"
+    },
+    "MotionSensitivity": {
+      "text2": ["Bewegings-", "gevoeligheid"],
+      "desc": "Bewegingsgevoeligheid (0=uit | 1=minst gevoelig | ... | 9=meest gevoelig)"
+    },
+    "TemperatureUnit": {
+      "text2": ["Temperatuur", "schaal"],
+      "desc": "Temperatuurschaal (°C=Celsius | °F=Fahrenheit)"
+    },
+    "AdvancedIdle": {
+      "text2": ["Gedetailleerd", "slaapscherm"],
+      "desc": "Gedetailleerde informatie in een kleiner lettertype in het slaapscherm."
+    },
+    "DisplayRotation": {
+      "text2": ["Scherm-", "oriëntatie"],
+      "desc": "Schermoriëntatie (R=Rechtshandig | L=Linkshandig | A=Automatisch)"
+    },
+    "BoostTemperature": {
+      "text2": ["Verhogings", "temp"],
+      "desc": "Verhogingstemperatuur"
+    },
+    "AutoStart": {
+      "text2": ["Auto", "start"],
+      "desc": "Breng de soldeerbout op temperatuur bij het opstarten. (F=Uit | T=Soldeertemperatuur | S=Slaapstand-temperatuur | K=Slaapstand kamertemperatuur)"
+    },
+    "CooldownBlink": {
+      "text2": ["Afkoel", "knipper"],
+      "desc": "Temperatuur knippert in hoofdmenu tijdens afkoeling."
+    },
+    "TemperatureCalibration": {
+      "text2": ["Calibreer", "temperatuur?"],
+      "desc": "Temperatuur van de punt calibreren."
+    },
+    "SettingsReset": {
+      "text2": ["Instellingen", "resetten?"],
+      "desc": "Alle instellingen resetten."
+    },
+    "VoltageCalibration": {
+      "text2": ["Calibreer", "voedingsspanning?"],
+      "desc": "VIN Calibreren. Bevestigen door knoppen lang in te drukken."
+    },
+    "AdvancedSoldering": {
+      "text2": ["Gedetailleerd", "soldeerscherm"],
+      "desc": "Gedetailleerde informatie in kleiner lettertype in soldeerscherm."
+    },
+    "ScrollingSpeed": {
+      "text2": ["Scrol", "snelheid"],
+      "desc": "Scrolsnelheid van de tekst."
+    },
+    "QCMaxVoltage": {
+      "text2": ["Vermogen", "Watt"],
+      "desc": "Vermogen van de adapter"
+    },
+    "PDNegTimeout": {
+      "text2": ["PD", "timeout"],
+      "desc": "PD negotiation timeout in 100ms steps for compatibility with some QC chargers (0: disabled)"
+    },
+    "PowerLimit": {
+      "text2": ["Power", "Limit"],
+      "desc": "Maximum power the iron can use (Watts)"
+    },
+    "ReverseButtonTempChange": {
+      "text2": ["Key +-", "reverse?"],
+      "desc": "Reverse the tip temperature change buttons plus minus assignment."
+    },
+    "TempChangeShortStep": {
+      "text2": ["Temp change", "short?"],
+      "desc": "Temperature change steps on short button press!"
+    },
+    "TempChangeLongStep": {
+      "text2": ["Temp change", "long?"],
+      "desc": "Temperature change steps on long button press!"
+    },
+    "PowerPulsePower": {
+      "text2": ["Power", "Pulse W"],
+      "desc": "Keep awake pulse power intensity"
+    },
+    "HallEffSensitivity": {
+      "text2": ["Hall Eff", "Sensitivity"],
+      "desc": "Sensitivity of the Hall effect sensor in detecting sleep (O=Off | L=Low | M=Medium | H=High)"
+    },
+    "LockingMode": {
+      "text2": ["Allow buttons", "locking"],
+      "desc": "When soldering, long press on both buttons lock them (D=Disable | B=Boost only | F=Full locking)"
+    },
+    "MinVolCell": {
+      "text2": ["Minimum", "voltage"],
+      "desc": "Minimum allowed voltage per cell (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)"
+    },
+    "AnimLoop": {
+      "text2": ["Anim.", "loop"],
+      "desc": "Loop icon animations in root menu"
+    },
+    "AnimSpeed": {
+      "text2": ["Anim.", "speed"],
+      "desc": "Speed of icon animations in menu (O=off | L=low | M=medium | H=high)"
+    },
+    "PowerPulseWait": {
+      "text2": ["Power pulse", "wait time"],
+      "desc": "Time to wait before triggering every keep-awake pulse (x 2.5s)"
+    },
+    "PowerPulseDuration": {
+      "text2": ["Power pulse", "duration"],
+      "desc": "Keep-awake-pulse duration (x 250ms)"
+    },
+    "LanguageSwitch": {
+      "text2": ["Spraak:", " NL_BE   Vlaams"],
+      "desc": ""
+    },
+    "Brightness": {
+      "text2": ["Screen", "Brightness"],
+      "desc": "Adjust the contrast/brightness of the OLED screen"
+    },
+    "ColourInversion": {
+      "text2": ["Screen", "Invert"],
+      "desc": "Invert the colours of the OLED screen"
+    }
+  }
+}

Translations/translation_NO.json

@@ -0,0 +1,213 @@
+{
+  "languageCode": "NO",
+  "languageLocalName": "Norsk",
+  "fonts": ["ascii_basic", "latin_extended"],
+  "messages": {
+    "SettingsCalibrationDone": "Calibration done!",
+    "SettingsCalibrationWarning": "Sørg for at loddespissen har romtemperatur før du fortsetter!",
+    "SettingsResetWarning": "Er du sikker på at du vil tilbakestille til standardinnstillinger?",
+    "UVLOWarningString": "Lavspenn",
+    "UndervoltageString": "Underspenning",
+    "InputVoltageString": "Innspenn.: ",
+    "WarningTipTempString": "Spisstemp: ",
+    "BadTipString": "BAD TIP",
+    "SleepingSimpleString": "Zzzz",
+    "SleepingAdvancedString": "Dvale...",
+    "WarningSimpleString": "Varm",
+    "WarningAdvancedString": "VARM SPISS!",
+    "SleepingTipAdvancedString": "Spiss:",
+    "IdleTipString": "Spiss:",
+    "IdleSetString": "Set:",
+    "TipDisconnectedString": "SPISS FRAKOBLET",
+    "SolderingAdvancedPowerPrompt": "Effekt: ",
+    "OffString": "Av",
+    "YourGainMessage": "Your gain:"
+  },
+  "messagesWarn": {
+    "ResetOKMessage": "Reset OK",
+    "SettingsResetMessage": ["Settings were", "reset!"],
+    "NoAccelerometerMessage": ["No accelerometer", "detected!"],
+    "NoPowerDeliveryMessage": ["No USB-PD IC", "detected!"],
+    "LockingKeysString": " LOCKED",
+    "UnlockingKeysString": "UNLOCKED",
+    "WarningKeysLockedString": "!LOCKED!",
+    "WarningThermalRunaway": ["Thermal", "Runaway"]
+  },
+  "characters": {
+    "SettingRightChar": "H",
+    "SettingLeftChar": "V",
+    "SettingAutoChar": "A",
+    "SettingOffChar": "O",
+    "SettingSlowChar": "L",
+    "SettingMediumChar": "M",
+    "SettingFastChar": "H",
+    "SettingStartNoneChar": "I",
+    "SettingStartSolderingChar": "L",
+    "SettingStartSleepChar": "D",
+    "SettingStartSleepOffChar": "R",
+    "SettingSensitivityOff": "O",
+    "SettingSensitivityLow": "L",
+    "SettingSensitivityMedium": "M",
+    "SettingSensitivityHigh": "H",
+    "SettingLockDisableChar": "D",
+    "SettingLockBoostChar": "B",
+    "SettingLockFullChar": "F",
+    "SettingNAChar": "N/A"
+  },
+  "menuGroups": {
+    "PowerMenu": {
+      "text2": ["Power", "settings"],
+      "desc": "Power settings"
+    },
+    "SolderingMenu": {
+      "text2": ["Lodde-", "innst."],
+      "desc": "Loddeinnstillinger"
+    },
+    "PowerSavingMenu": {
+      "text2": ["Dvale-", "innst."],
+      "desc": "Dvaleinnstillinger"
+    },
+    "UIMenu": {
+      "text2": ["Bruker-", "grensesn."],
+      "desc": "Brukergrensesnitt-innstillinger"
+    },
+    "AdvancedMenu": {
+      "text2": ["Avanserte", "valg"],
+      "desc": "Avanserte valg"
+    }
+  },
+  "menuOptions": {
+    "DCInCutoff": {
+      "text2": ["Kilde", ""],
+      "desc": "Strømforsyning. Sett nedre spenning for automatisk nedstenging. (DC 10V) (S 3.3V per celle)"
+    },
+    "SleepTemperature": {
+      "text2": ["DTmp", ""],
+      "desc": "Dvaletemperatur (C)"
+    },
+    "SleepTimeout": {
+      "text2": ["DTid", ""],
+      "desc": "Tid før dvale (Minutter | Sekunder)"
+    },
+    "ShutdownTimeout": {
+      "text2": ["AvTid", ""],
+      "desc": "Tid før automatisk nedstenging (Minutter)"
+    },
+    "MotionSensitivity": {
+      "text2": ["BSensr", ""],
+      "desc": "Bevegelsesfølsomhet (0=Inaktiv | 1=Minst følsom | ... | 9=Mest følsom)"
+    },
+    "TemperatureUnit": {
+      "text2": ["TmpEnh", ""],
+      "desc": "Temperaturskala (C=Celsius | F=Fahrenheit)"
+    },
+    "AdvancedIdle": {
+      "text2": ["AvDvSk", ""],
+      "desc": "Vis detaljert informasjon med liten skrift på dvaleskjermen."
+    },
+    "DisplayRotation": {
+      "text2": ["SkRetn", ""],
+      "desc": "Skjermretning (H=Høyrehendt | V=Venstrehendt | A=Automatisk)"
+    },
+    "BoostTemperature": {
+      "text2": ["KTmp", ""],
+      "desc": "Temperatur i \"kraft\"-modus"
+    },
+    "AutoStart": {
+      "text2": ["AStart", ""],
+      "desc": "Start automatisk med lodding når strøm kobles til. (I=Inaktiv | L=Lodding | D=Dvale | R=Dvale romtemperatur)"
+    },
+    "CooldownBlink": {
+      "text2": ["KjBlnk", ""],
+      "desc": "Blink temperaturen på skjermen mens spissen fortsatt er varm."
+    },
+    "TemperatureCalibration": {
+      "text2": ["TempKal?", ""],
+      "desc": "Kalibrer spiss-temperatur."
+    },
+    "SettingsReset": {
+      "text2": ["TilbStl?", ""],
+      "desc": "Tilbakestill alle innstillinger"
+    },
+    "VoltageCalibration": {
+      "text2": ["KalSpIn?", ""],
+      "desc": "Kalibrer spenning. Knappene justerer. Langt trykk for å gå ut"
+    },
+    "AdvancedSoldering": {
+      "text2": ["AvLdSk", ""],
+      "desc": "Vis detaljert informasjon ved lodding"
+    },
+    "ScrollingSpeed": {
+      "text2": ["RullHa", ""],
+      "desc": "Hastigheten på rulletekst"
+    },
+    "QCMaxVoltage": {
+      "text2": ["Power", "Wattage"],
+      "desc": "Power Wattage of the power adapter used"
+    },
+    "PDNegTimeout": {
+      "text2": ["PD", "timeout"],
+      "desc": "PD negotiation timeout in 100ms steps for compatibility with some QC chargers (0: disabled)"
+    },
+    "PowerLimit": {
+      "text2": ["Power", "Limit"],
+      "desc": "Maximum power the iron can use (Watts)"
+    },
+    "ReverseButtonTempChange": {
+      "text2": ["Key +-", "reverse?"],
+      "desc": "Reverse the tip temperature change buttons plus minus assignment."
+    },
+    "TempChangeShortStep": {
+      "text2": ["Temp change", "short?"],
+      "desc": "Temperature change steps on short button press!"
+    },
+    "TempChangeLongStep": {
+      "text2": ["Temp change", "long?"],
+      "desc": "Temperature change steps on long button press!"
+    },
+    "PowerPulsePower": {
+      "text2": ["Power", "Pulse W"],
+      "desc": "Keep awake pulse power intensity"
+    },
+    "HallEffSensitivity": {
+      "text2": ["Hall Eff", "Sensitivity"],
+      "desc": "Sensitivity of the Hall effect sensor in detecting sleep (O=Off | L=Low | M=Medium | H=High)"
+    },
+    "LockingMode": {
+      "text2": ["Allow buttons", "locking"],
+      "desc": "When soldering, long press on both buttons lock them (D=Disable | B=Boost only | F=Full locking)"
+    },
+    "MinVolCell": {
+      "text2": ["Minimum", "voltage"],
+      "desc": "Minimum allowed voltage per cell (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)"
+    },
+    "AnimLoop": {
+      "text2": ["Anim.", "loop"],
+      "desc": "Loop icon animations in root menu"
+    },
+    "AnimSpeed": {
+      "text2": ["Anim.", "speed"],
+      "desc": "Speed of icon animations in menu (O=off | L=low | M=medium | H=high)"
+    },
+    "PowerPulseWait": {
+      "text2": ["Power pulse", "wait time"],
+      "desc": "Time to wait before triggering every keep-awake pulse (x 2.5s)"
+    },
+    "PowerPulseDuration": {
+      "text2": ["Power pulse", "duration"],
+      "desc": "Keep-awake-pulse duration (x 250ms)"
+    },
+    "LanguageSwitch": {
+      "text2": ["Språk:", " NO       Norsk"],
+      "desc": ""
+    },
+    "Brightness": {
+      "text2": ["Screen", "Brightness"],
+      "desc": "Adjust the contrast/brightness of the OLED screen"
+    },
+    "ColourInversion": {
+      "text2": ["Screen", "Invert"],
+      "desc": "Invert the colours of the OLED screen"
+    }
+  }
+}

Translations/translation_PL.json

@@ -0,0 +1,214 @@
+{
+  "languageCode": "PL",
+  "languageLocalName": "Polski",
+  "fonts": ["ascii_basic", "latin_extended"],
+  "tempUnitFahrenheit": false,
+  "messages": {
+    "SettingsCalibrationDone": "Kalibracja udana!",
+    "SettingsCalibrationWarning": "Przed kontynuowaniem upewnij się, że końcówka osiągnęła temperaturę pokojową!",
+    "SettingsResetWarning": "Czy na pewno chcesz przywrócić ustawienia fabryczne?",
+    "UVLOWarningString": "NIS. NAP",
+    "UndervoltageString": "Zbyt niskie nap.",
+    "InputVoltageString": "Nap. wej.:",
+    "WarningTipTempString": "Temp. grotu:",
+    "BadTipString": "ZŁY GROT",
+    "SleepingSimpleString": "Zzz!",
+    "SleepingAdvancedString": "Tr. uśpienia",
+    "WarningSimpleString": "HOT!",
+    "WarningAdvancedString": "GORĄCA KOŃCÓWKA!",
+    "SleepingTipAdvancedString": "Grot:",
+    "IdleTipString": "Grot:",
+    "IdleSetString": " Ust:",
+    "TipDisconnectedString": "GROT ODŁĄCZONY",
+    "SolderingAdvancedPowerPrompt": "Moc: ",
+    "OffString": "Wył",
+    "YourGainMessage": "Us.zysk:"
+  },
+  "messagesWarn": {
+    "ResetOKMessage": "Reset OK",
+    "SettingsResetMessage": ["Ust. zresetowane", ""],
+    "NoAccelerometerMessage": ["Nie rozpoznano", "akcelerometru!"],
+    "NoPowerDeliveryMessage": ["Nie rozpoznano", "kont. USB-PD IC!"],
+    "LockingKeysString": " ZABLOK.",
+    "UnlockingKeysString": "ODBLOK.",
+    "WarningKeysLockedString": "!ZABLOK!",
+    "WarningThermalRunaway": ["Ucieczka", "termiczna"]
+  },
+  "characters": {
+    "SettingRightChar": "P",
+    "SettingLeftChar": "L",
+    "SettingAutoChar": "A",
+    "SettingOffChar": "O",
+    "SettingSlowChar": "W",
+    "SettingMediumChar": "M",
+    "SettingFastChar": "S",
+    "SettingStartNoneChar": "B",
+    "SettingStartSolderingChar": "T",
+    "SettingStartSleepChar": "Z",
+    "SettingStartSleepOffChar": "O",
+    "SettingSensitivityOff": "O",
+    "SettingSensitivityLow": "N",
+    "SettingSensitivityMedium": "Ś",
+    "SettingSensitivityHigh": "W",
+    "SettingLockDisableChar": "W",
+    "SettingLockBoostChar": "B",
+    "SettingLockFullChar": "P",
+    "SettingNAChar": "N/D"
+  },
+  "menuGroups": {
+    "PowerMenu": {
+      "text2": ["Ustawienia", "zasilania"],
+      "desc": "Zasilanie i minimalne napięcie na komórkę"
+    },
+    "SolderingMenu": {
+      "text2": ["Lutowanie", ""],
+      "desc": "Ustawienia trybu lutowania"
+    },
+    "PowerSavingMenu": {
+      "text2": ["Oszcz.", "energii"],
+      "desc": "Ustawienia oszczędzania energii"
+    },
+    "UIMenu": {
+      "text2": ["Interfejs", "użytkownika"],
+      "desc": "Ustawienia interfejsu użytkownika"
+    },
+    "AdvancedMenu": {
+      "text2": ["Ustawienia", "zaawans."],
+      "desc": "Ustawienia zaawansowane"
+    }
+  },
+  "menuOptions": {
+    "DCInCutoff": {
+      "text2": ["Źródło", "zasilania"],
+      "desc": "Źródło zasilania. Ustaw napięcie odcięcia. (DC 10V) (S 3.3V dla ogniw Li, wyłącz limit mocy)"
+    },
+    "SleepTemperature": {
+      "text2": ["Temp.", "uśpienia"],
+      "desc": "Temperatura w trybie uśpienia (°C)"
+    },
+    "SleepTimeout": {
+      "text2": ["Czas do", "uśpienia"],
+      "desc": "Czas do przejścia w tryb uśpienia (minuty | sekundy)"
+    },
+    "ShutdownTimeout": {
+      "text2": ["Czas do", "wyłączenia"],
+      "desc": "Czas do wyłączenia (minuty)"
+    },
+    "MotionSensitivity": {
+      "text2": ["Czułość", "wykr. ruchu"],
+      "desc": "Czułość wykrywania ruchu (0: Wyłączona | 1: Minimalna | ... | 9: Maksymalna)"
+    },
+    "TemperatureUnit": {
+      "text2": ["Jednostka", "temperatury"],
+      "desc": "Jednostka temperatury (C: Celciusz | F: Fahrenheit)"
+    },
+    "AdvancedIdle": {
+      "text2": ["Szeczegółowy", "ekran bezczy."],
+      "desc": "Wyświetla szczegółowe informacje za pomocą mniejszej czcionki na ekranie bezczynności"
+    },
+    "DisplayRotation": {
+      "text2": ["Obrót", "ekranu"],
+      "desc": "Obrót ekranu (P: dla praworęcznych | L: dla leworęcznych | A: automatycznie)"
+    },
+    "BoostTemperature": {
+      "text2": ["Temp.", "boost"],
+      "desc": "Temperatura w trybie \"boost\" "
+    },
+    "AutoStart": {
+      "text2": ["Aut. uruch.", "tr. lutowania"],
+      "desc": "Automatyczne uruchamianie trybu lutowania po włączeniu zasilania. (B: wyłączone | T: lutowanie | Z: uśpienie | O: uśpienie w temp. pokojowej)"
+    },
+    "CooldownBlink": {
+      "text2": ["Mig. podczas", "wychładzania"],
+      "desc": "Temperatura miga podczas wychładzania, gdy grot jest wciąż gorący"
+    },
+    "TemperatureCalibration": {
+      "text2": ["Kalibracja", "temp. grotu"],
+      "desc": "Kalibracja temperatury grotu lutownicy"
+    },
+    "SettingsReset": {
+      "text2": ["Ustawienia", "fabryczne"],
+      "desc": "Resetuje wszystkie ustawienia"
+    },
+    "VoltageCalibration": {
+      "text2": ["Kalibracja", "napięcia"],
+      "desc": "Kalibracja napięcia wejściowego. Krótkie naciśnięcie, aby ustawić, długie naciśnięcie, aby wyjść."
+    },
+    "AdvancedSoldering": {
+      "text2": ["Sz. inf. w", "tr. lutowania"],
+      "desc": "Wyświetl szczegółowe informacje w trybie lutowania"
+    },
+    "ScrollingSpeed": {
+      "text2": ["Sz. przew.", "tekstu"],
+      "desc": "Szybkość przewijania tekstu"
+    },
+    "QCMaxVoltage": {
+      "text2": ["Moc", "w W"],
+      "desc": "Moc używanego zasilacza w (W)"
+    },
+    "PDNegTimeout": {
+      "text2": ["Limit czasu", "PD"],
+      "desc": "Limit czasu negocjacji PD w krokach co 100 ms dla zgodności z niektórymi ładowarkami QC (0: wyłączone)"
+    },
+    "PowerLimit": {
+      "text2": ["Ogr.", "mocy"],
+      "desc": "Maksymalna moc (W), jakiej może użyć lutownica"
+    },
+    "ReverseButtonTempChange": {
+      "text2": ["Zamień przyc.", "+ -"],
+      "desc": "Zamienia działanie przycisków zmiany temperatury grotu"
+    },
+    "TempChangeShortStep": {
+      "text2": ["Zm. temp.", "kr. przyc."],
+      "desc": "Wartość zmiany temperatury, po krótkim przyciśnięciu (°C)"
+    },
+    "TempChangeLongStep": {
+      "text2": ["Zm. temp.", "dł. przyc."],
+      "desc": "Wartość zmiany temperatury, po długim przyciśnięciu (°C)"
+    },
+    "PowerPulsePower": {
+      "text2": ["Moc", "impulsu"],
+      "desc": "W przypadku używania powerbanku, utrzymuj moc na poziomie (W) aby nie uśpić powerbanku"
+    },
+    "HallEffSensitivity": {
+      "text2": ["Czułość", "cz. Halla"],
+      "desc": "Czułość czujnika Halla, używanego do przechodznia w tryb uśpienia (O=Wył | N=Niska | Ś=Średnia | W=Wysoka)"
+    },
+    "LockingMode": {
+      "text2": ["Blokada", "przycisków"],
+      "desc": "W trybie lutowania, wciśnij oba przyciski aby je zablokować (O=Wyłączona | B=tylko Boost | P=pełna blokada)"
+    },
+    "MinVolCell": {
+      "text2": ["Minimalne", "napięcie"],
+      "desc": "Minimalne dozwolone napięcie na komórkę (3S: 3 - 3,7V | 4-6S: 2,4 - 3,7V)"
+    },
+    "AnimLoop": {
+      "text2": ["Zapętlona", "animacja"],
+      "desc": "Zapętla animację ikon w menu głównym"
+    },
+    "AnimSpeed": {
+      "text2": ["Prędkosć", "animacji"],
+      "desc": "Prędkość animacji ikon w menu (O: wył. | L: mała | M: średnia | H: duża)"
+    },
+    "PowerPulseWait": {
+      "text2": ["Czas między", "imp. mocy"],
+      "desc": "Czas między kolejnymi impulsami mocy zapobiegającymi usypianiu powerbanku (x2,5 s)"
+    },
+    "PowerPulseDuration": {
+      "text2": ["Długość", "impulsu mocy"],
+      "desc": "Długość impulsu mocy zapobiegającego usypianiu powerbanku (x250 ms)"
+    },
+    "LanguageSwitch": {
+      "text2": ["Język :", " PL      Polski"],
+      "desc": ""
+    },
+    "Brightness": {
+      "text2": ["Jasność", "wyświetlacza"],
+      "desc": "Regulacja kontrastu/jasności wyświetlacza OLED"
+    },
+    "ColourInversion": {
+      "text2": ["Odwrócenie", "kolorów"],
+      "desc": "Odwrócenie kolorów wyświetlacza OLED"
+    }
+  }
+}

Translations/translation_PT.json

@@ -0,0 +1,213 @@
+{
+  "languageCode": "PT",
+  "languageLocalName": "Português",
+  "fonts": ["ascii_basic", "latin_extended"],
+  "messages": {
+    "SettingsCalibrationDone": "Calibração terminada!",
+    "SettingsCalibrationWarning": "A ponta deve estar à temperatura ambiente antes de continuar!",
+    "SettingsResetWarning": "Definições de fábrica?",
+    "UVLOWarningString": "DC BAIXO",
+    "UndervoltageString": "Subtensão",
+    "InputVoltageString": "Tensão ",
+    "WarningTipTempString": "Temperatura ",
+    "BadTipString": "ER PONTA",
+    "SleepingSimpleString": "Zzzz",
+    "SleepingAdvancedString": "Repouso...",
+    "WarningSimpleString": "TEMP",
+    "WarningAdvancedString": "TEMP ELEVADA!",
+    "SleepingTipAdvancedString": "Ponta:",
+    "IdleTipString": "Ponta:",
+    "IdleSetString": " Aj:",
+    "TipDisconnectedString": "SEM PONTA",
+    "SolderingAdvancedPowerPrompt": "Power: ",
+    "OffString": "Off",
+    "YourGainMessage": "Your gain:"
+  },
+  "messagesWarn": {
+    "ResetOKMessage": "Reset OK",
+    "SettingsResetMessage": ["Settings were", "reset!"],
+    "NoAccelerometerMessage": ["No accelerometer", "detected!"],
+    "NoPowerDeliveryMessage": ["No USB-PD IC", "detected!"],
+    "LockingKeysString": "LOCKED",
+    "UnlockingKeysString": "UNLOCKED",
+    "WarningKeysLockedString": "!LOCKED!",
+    "WarningThermalRunaway": ["Thermal", "Runaway"]
+  },
+  "characters": {
+    "SettingRightChar": "D",
+    "SettingLeftChar": "C",
+    "SettingAutoChar": "A",
+    "SettingOffChar": "O",
+    "SettingSlowChar": "L",
+    "SettingMediumChar": "M",
+    "SettingFastChar": "R",
+    "SettingStartNoneChar": "D",
+    "SettingStartSolderingChar": "S",
+    "SettingStartSleepChar": "H",
+    "SettingStartSleepOffChar": "A",
+    "SettingSensitivityOff": "O",
+    "SettingSensitivityLow": "L",
+    "SettingSensitivityMedium": "M",
+    "SettingSensitivityHigh": "H",
+    "SettingLockDisableChar": "D",
+    "SettingLockBoostChar": "B",
+    "SettingLockFullChar": "F",
+    "SettingNAChar": "N/A"
+  },
+  "menuGroups": {
+    "PowerMenu": {
+      "text2": ["Power", "settings"],
+      "desc": "Power settings"
+    },
+    "SolderingMenu": {
+      "text2": ["Configurações", "Solda"],
+      "desc": "Configurações de soldagem"
+    },
+    "PowerSavingMenu": {
+      "text2": ["Modos", "Repouso"],
+      "desc": "Configurações de economia de energia"
+    },
+    "UIMenu": {
+      "text2": ["Interface", "Utilizador"],
+      "desc": "Configurações do interface do utilizador"
+    },
+    "AdvancedMenu": {
+      "text2": ["Menu", "Avançado"],
+      "desc": "Opções avançadas"
+    }
+  },
+  "menuOptions": {
+    "DCInCutoff": {
+      "text2": ["Fonte", "alimentação"],
+      "desc": "Fonte de alimentação. Define a tensão de corte. (DC=10V) (S=3.3V/célula)"
+    },
+    "SleepTemperature": {
+      "text2": ["Temperat.", "repouso"],
+      "desc": "Temperatura de repouso (C)"
+    },
+    "SleepTimeout": {
+      "text2": ["Tempo", "repouso"],
+      "desc": "Tempo para repouso (Minutos | Segundos)"
+    },
+    "ShutdownTimeout": {
+      "text2": ["Tempo", "desligam."],
+      "desc": "Tempo para desligamento (Minutos)"
+    },
+    "MotionSensitivity": {
+      "text2": ["Sensibilidade", "movimento"],
+      "desc": "Sensibilidade ao movimento (0=Desligado | 1=Menor | ... | 9=Maior)"
+    },
+    "TemperatureUnit": {
+      "text2": ["Unidade", "temperatura"],
+      "desc": "Unidade de temperatura (C=Celsius | F=Fahrenheit)"
+    },
+    "AdvancedIdle": {
+      "text2": ["Tela repouso", "avançada"],
+      "desc": "Exibe informações avançadas quando em espera"
+    },
+    "DisplayRotation": {
+      "text2": ["Orientação", "tela"],
+      "desc": "Orientação da tela (D=estro | C=anhoto | A=utomática)"
+    },
+    "BoostTemperature": {
+      "text2": ["Modo turbo", "temperat."],
+      "desc": "Ajuste de temperatura do modo \"turbo\""
+    },
+    "AutoStart": {
+      "text2": ["Partida", "automática"],
+      "desc": "Aquece a ponta automaticamente ao ligar (D=desligar | S=soldagem | H=hibernar | A=hibernar temp. ambiente)"
+    },
+    "CooldownBlink": {
+      "text2": ["Piscar ao", "arrefecer"],
+      "desc": "Faz o valor da temperatura piscar durante o arrefecimento"
+    },
+    "TemperatureCalibration": {
+      "text2": ["Calibrar", "temperatura"],
+      "desc": "Calibra a temperatura"
+    },
+    "SettingsReset": {
+      "text2": ["Reset de", "fábrica?"],
+      "desc": "Reverte todos ajustes"
+    },
+    "VoltageCalibration": {
+      "text2": ["Calibrar", "tensão"],
+      "desc": "Calibra a tensão de alimentação. Use os botões para ajustar o valor. Mantenha pressionado para sair"
+    },
+    "AdvancedSoldering": {
+      "text2": ["Tela trabalho", "avançada"],
+      "desc": "Exibe informações avançadas durante o uso"
+    },
+    "ScrollingSpeed": {
+      "text2": ["Velocidade", "texto ajuda"],
+      "desc": "Velocidade a que o texto é exibido"
+    },
+    "QCMaxVoltage": {
+      "text2": ["Potência", "Fonte"],
+      "desc": "Potência da fonte usada (Watt)"
+    },
+    "PDNegTimeout": {
+      "text2": ["PD", "timeout"],
+      "desc": "PD negotiation timeout in 100ms steps for compatibility with some QC chargers (0: disabled)"
+    },
+    "PowerLimit": {
+      "text2": ["Power", "Limit"],
+      "desc": "Maximum power the iron can use (Watts)"
+    },
+    "ReverseButtonTempChange": {
+      "text2": ["Key +-", "reverse?"],
+      "desc": "Reverse the tip temperature change buttons plus minus assignment."
+    },
+    "TempChangeShortStep": {
+      "text2": ["Temp change", "short?"],
+      "desc": "Temperature change steps on short button press!"
+    },
+    "TempChangeLongStep": {
+      "text2": ["Temp change", "long?"],
+      "desc": "Temperature change steps on long button press!"
+    },
+    "PowerPulsePower": {
+      "text2": ["Power", "Pulse W"],
+      "desc": "Keep awake pulse power intensity"
+    },
+    "HallEffSensitivity": {
+      "text2": ["Hall Eff", "Sensitivity"],
+      "desc": "Sensitivity of the Hall effect sensor in detecting sleep (O=Off | L=Low | M=Medium | H=High)"
+    },
+    "LockingMode": {
+      "text2": ["Allow buttons", "locking"],
+      "desc": "When soldering, long press on both buttons lock them (D=Disable | B=Boost only | F=Full locking)"
+    },
+    "MinVolCell": {
+      "text2": ["Minimum", "voltage"],
+      "desc": "Minimum allowed voltage per cell (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)"
+    },
+    "AnimLoop": {
+      "text2": ["Anim.", "loop"],
+      "desc": "Loop icon animations in root menu"
+    },
+    "AnimSpeed": {
+      "text2": ["Anim.", "speed"],
+      "desc": "Speed of icon animations in menu (O=off | L=low | M=medium | H=high)"
+    },
+    "PowerPulseWait": {
+      "text2": ["Power pulse", "wait time"],
+      "desc": "Time to wait before triggering every keep-awake pulse (x 2.5s)"
+    },
+    "PowerPulseDuration": {
+      "text2": ["Power pulse", "duration"],
+      "desc": "Keep-awake-pulse duration (x 250ms)"
+    },
+    "LanguageSwitch": {
+      "text2": ["Idioma :", " PT   Português"],
+      "desc": ""
+    },
+    "Brightness": {
+      "text2": ["Screen", "Brightness"],
+      "desc": "Adjust the contrast/brightness of the OLED screen"
+    },
+    "ColourInversion": {
+      "text2": ["Screen", "Invert"],
+      "desc": "Invert the colours of the OLED screen"
+    }
+  }
+}

Translations/translation_RO.json

@@ -0,0 +1,214 @@
+{
+  "languageCode": "RO",
+  "languageLocalName": "Română",
+  "fonts": ["ascii_basic", "latin_extended"],
+  "tempUnitFahrenheit": true,
+  "messages": {
+    "SettingsCalibrationDone": "Calibrare completa!",
+    "SettingsCalibrationWarning": "Vă rugăm să vă asigurati că vârful este la temperatura camerei, înainte de a continua!",
+    "SettingsResetWarning": "Sigur doriti să restaurati la setările implicite?",
+    "UVLOWarningString": "DC LOW",
+    "UndervoltageString": "Sub tensiune",
+    "InputVoltageString": "Intrare V: ",
+    "WarningTipTempString": "Temp. varf: ",
+    "BadTipString": "VARF DEFECT",
+    "SleepingSimpleString": "Zzzz",
+    "SleepingAdvancedString": "Adormit...",
+    "WarningSimpleString": "FIERBINTE!",
+    "WarningAdvancedString": "!!! VARF FIERBINTE !!!",
+    "SleepingTipAdvancedString": "Tip:",
+    "IdleTipString": "Tip:",
+    "IdleSetString": " Set:",
+    "TipDisconnectedString": "FĂRĂ VARF",
+    "SolderingAdvancedPowerPrompt": "Putere: ",
+    "OffString": "Nu",
+    "YourGainMessage": "Coeficient:"
+  },
+  "messagesWarn": {
+    "ResetOKMessage": "Reset OK",
+    "SettingsResetMessage": ["Setările au fost", "resetate!"],
+    "NoAccelerometerMessage": ["Nu accelerometru", "detectat!"],
+    "NoPowerDeliveryMessage": ["Fără USB-PD IC", "detectat!"],
+    "LockingKeysString": "BLOCAT",
+    "UnlockingKeysString": "DEBLOCAT",
+    "WarningKeysLockedString": "!BLOCAT!",
+    "WarningThermalRunaway": ["Incalzire", "Esuata"]
+  },
+  "characters": {
+    "SettingRightChar": "D",
+    "SettingLeftChar": "S",
+    "SettingAutoChar": "A",
+    "SettingOffChar": "O",
+    "SettingSlowChar": "Î",
+    "SettingMediumChar": "M",
+    "SettingFastChar": "R",
+    "SettingStartNoneChar": "O",
+    "SettingStartSolderingChar": "S",
+    "SettingStartSleepChar": "Z",
+    "SettingStartSleepOffChar": "R",
+    "SettingSensitivityOff": "O",
+    "SettingSensitivityLow": "L",
+    "SettingSensitivityMedium": "M",
+    "SettingSensitivityHigh": "H",
+    "SettingLockDisableChar": "D",
+    "SettingLockBoostChar": "B",
+    "SettingLockFullChar": "F",
+    "SettingNAChar": "N/A"
+  },
+  "menuGroups": {
+    "PowerMenu": {
+      "text2": ["Setări de", "alimentare"],
+      "desc": "Setări de alimentare"
+    },
+    "SolderingMenu": {
+      "text2": ["Setări de", "lipire"],
+      "desc": "Setări de lipire"
+    },
+    "PowerSavingMenu": {
+      "text2": ["Modul", "repaus"],
+      "desc": "Setări de economisire a energiei"
+    },
+    "UIMenu": {
+      "text2": ["Interfată", "utilizator"],
+      "desc": "Setări interfată utilizator"
+    },
+    "AdvancedMenu": {
+      "text2": ["Optiuni", "avansate"],
+      "desc": "Optiuni avansate"
+    }
+  },
+  "menuOptions": {
+    "DCInCutoff": {
+      "text2": ["Sursa de", "alimentare"],
+      "desc": "Sursa de alimentare. Setează tensiunea de întrerupere. (DC 10V) (S 3.3V per celulă, dezactivati limita de alimentare)"
+    },
+    "SleepTemperature": {
+      "text2": ["Temp", "repaus"],
+      "desc": "Temperatura vârfului în \"modul repaus\""
+    },
+    "SleepTimeout": {
+      "text2": ["Expirare", "repaus"],
+      "desc": "Interval înainte de lansarea \"modului de repaus\" în (S=secunde | M=minute)"
+    },
+    "ShutdownTimeout": {
+      "text2": ["Expirare", "oprire"],
+      "desc": "Interval înainte ca letconul să se oprească (M=minute)"
+    },
+    "MotionSensitivity": {
+      "text2": ["Sensibilitate", "la mişcare"],
+      "desc": "0=oprit | 1=putin sensibil | ... | 9=cel mai sensibil"
+    },
+    "TemperatureUnit": {
+      "text2": ["Unitate de", "temperatură"],
+      "desc": "C=Celsius | F=Fahrenheit"
+    },
+    "AdvancedIdle": {
+      "text2": ["Detalii,", "ecran inactiv"],
+      "desc": "Afisati informatii detaliate într-un font mai mic pe ecranul de repaus"
+    },
+    "DisplayRotation": {
+      "text2": ["Orientare", "ecran"],
+      "desc": "R=dreptaci | L=stângaci | A=auto"
+    },
+    "BoostTemperature": {
+      "text2": ["Boost", "temp"],
+      "desc": "Temperatura utilizată în \"modul boost\""
+    },
+    "AutoStart": {
+      "text2": ["Auto", "start"],
+      "desc": "Start letcon în modul de lipire la pornire (O=oprit | S=lipire | Z=repaus | R=repaus la temperatura camerei)"
+    },
+    "CooldownBlink": {
+      "text2": ["Clipeste", "la răcire"],
+      "desc": "Clipeste temperatura după oprirea încălzirii, în timp ce vârful este încă fierbinte"
+    },
+    "TemperatureCalibration": {
+      "text2": ["Calibrare", "temperatură?"],
+      "desc": "Începeti calibrarea compensării de temperatură a vârfului"
+    },
+    "SettingsReset": {
+      "text2": ["Setări", "din fabrică"],
+      "desc": "Reveniti la setările din fabrică"
+    },
+    "VoltageCalibration": {
+      "text2": ["Calibrare tens.", "de intrare?"],
+      "desc": "Porniti calibrarea VIN (apăsati lung pentru a iesi)"
+    },
+    "AdvancedSoldering": {
+      "text2": ["Detalii", "ecran lipire"],
+      "desc": "Afisati informatii detaliate într-un font mai mic pe ecranul de lipire"
+    },
+    "ScrollingSpeed": {
+      "text2": ["Viteză", "derulare"],
+      "desc": "Viteză derulare text cu informatii la (S=lent | F=rapid)"
+    },
+    "QCMaxVoltage": {
+      "text2": ["QC", "voltaj"],
+      "desc": "Tensiunea maximă QC dorită pentru care negociază letconul"
+    },
+    "PDNegTimeout": {
+      "text2": ["PD", "timeout"],
+      "desc": "Timp limita de negociere pentru tranzactia PD, in pasi de 100ms, pentru compatibilitate cu alimentatoarele QC"
+    },
+    "PowerLimit": {
+      "text2": ["Putere", "limită"],
+      "desc": "Puterea maximă pe care letconul o poate folosi (W=watt)"
+    },
+    "ReverseButtonTempChange": {
+      "text2": ["Inversare", "+ - butoane"],
+      "desc": "Inversarea butoanelor de reglare a temperaturii"
+    },
+    "TempChangeShortStep": {
+      "text2": ["Schimbare temp.", "apăsare scută"],
+      "desc": "Schimbarea temperaturii la apăsarea scurtă a butonului"
+    },
+    "TempChangeLongStep": {
+      "text2": ["Schimbare temp.", "apăsare lungă"],
+      "desc": "Schimbarea temperaturii la apăsarea lungă a butonului"
+    },
+    "PowerPulsePower": {
+      "text2": ["Putere", "puls"],
+      "desc": "Puterea pulsului de mentinere activa a blocului de alimentare (watt)"
+    },
+    "HallEffSensitivity": {
+      "text2": ["Sensibilitate", "senzor Hall"],
+      "desc": "Sensibilitate senzor cu efect Hall pentru a detecta repausul (O=oprit | L=scăzut | M=mediu | H=înalt)"
+    },
+    "LockingMode": {
+      "text2": ["Blocare", "butoane"],
+      "desc": "Când lipiti, apăsati lung ambele butoane, pentru a le bloca (D=dezactivare | B=numai \"modul boost\" | F=blocare completă)"
+    },
+    "MinVolCell": {
+      "text2": ["Voltaj", "minim"],
+      "desc": "Tensiunea minimă admisă pe celulă (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)"
+    },
+    "AnimLoop": {
+      "text2": ["Animatii", "buclă"],
+      "desc": "Animatii de pictograme în meniul principal"
+    },
+    "AnimSpeed": {
+      "text2": ["Animatii", "viteză"],
+      "desc": "Ritmul animatiilor pictogramei din meniu (O=oprit | S=încet | M=mediu | F=rapid)"
+    },
+    "PowerPulseWait": {
+      "text2": ["Întârziere", "puls putere"],
+      "desc": "Perioada pulsului de mentinere (x 2.5s)"
+    },
+    "PowerPulseDuration": {
+      "text2": ["Durată", "puls putere"],
+      "desc": "Durata pulsului de mentinere (x 250ms)"
+    },
+    "LanguageSwitch": {
+      "text2": ["Limbă:", " RO     Română"],
+      "desc": "Limba curenta"
+    },
+    "Brightness": {
+        "text2": ["Ecranului", "luminozitatea"],
+        "desc": "Ajusteaza luminozitatea ecranului"
+    },
+    "ColourInversion": {
+        "text2": ["Inverseaza", "culoarea"],
+        "desc": "Inverseaza culoarea ecranului"
+    }
+  }
+}

Translations/translation_RU.json

@@ -0,0 +1,213 @@
+{
+  "languageCode": "RU",
+  "languageLocalName": "Русский",
+  "fonts": ["ascii_basic", "latin_extended", "cyrillic"],
+  "messages": {
+    "SettingsCalibrationDone": "Калибровка завершена!",
+    "SettingsCalibrationWarning": "Прежде чем продолжить, пожалуйста, убедитесь, что жало имеет комнатную температуру!",
+    "SettingsResetWarning": "Вы уверены, что хотите сбросить настройки к значениям по умолчанию?",
+    "UVLOWarningString": "НАПРЯЖ--",
+    "UndervoltageString": "Низкое напряжение",
+    "InputVoltageString": "Питание В: ",
+    "WarningTipTempString": "Темп. жала: ",
+    "BadTipString": "ЖАЛО--",
+    "SleepingSimpleString": "Zzzz",
+    "SleepingAdvancedString": "Ожидание...",
+    "WarningSimpleString": "ГОРЯЧО!",
+    "WarningAdvancedString": "!!! ГОРЯЧЕЕ !!!\n!!! ЖАЛО !!!",
+    "SleepingTipAdvancedString": "Жало:",
+    "IdleTipString": "Жало:",
+    "IdleSetString": " ->",
+    "TipDisconnectedString": "ЖАЛО ОТСОЕДИНЕНО",
+    "SolderingAdvancedPowerPrompt": "Питание: ",
+    "OffString": "Выкл.",
+    "YourGainMessage": "Прирост:"
+  },
+  "messagesWarn": {
+    "ResetOKMessage": "Сброс OK",
+    "SettingsResetMessage": ["Настройки", "сброшены!"],
+    "NoAccelerometerMessage": ["Не определен", "акселерометр!"],
+    "NoPowerDeliveryMessage": ["No USB-PD IC", "detected!"],
+    "LockingKeysString": "LOCKED",
+    "UnlockingKeysString": "UNLOCKED",
+    "WarningKeysLockedString": "!LOCKED!",
+    "WarningThermalRunaway": ["Thermal", "Runaway"]
+  },
+  "characters": {
+    "SettingRightChar": "П",
+    "SettingLeftChar": "Л",
+    "SettingAutoChar": "А",
+    "SettingOffChar": "O",
+    "SettingSlowChar": "М",
+    "SettingMediumChar": "M",
+    "SettingFastChar": "Б",
+    "SettingStartNoneChar": "В",
+    "SettingStartSolderingChar": "П",
+    "SettingStartSleepChar": "О",
+    "SettingStartSleepOffChar": "К",
+    "SettingSensitivityOff": "О",
+    "SettingSensitivityLow": "Н",
+    "SettingSensitivityMedium": "С",
+    "SettingSensitivityHigh": "В",
+    "SettingLockDisableChar": "О",
+    "SettingLockBoostChar": "Т",
+    "SettingLockFullChar": "П",
+    "SettingNAChar": "Н/Д"
+  },
+  "menuGroups": {
+    "PowerMenu": {
+      "text2": ["Параметры", "питания"],
+      "desc": "Источник питания и минимальное напряжение на ячейку"
+    },
+    "SolderingMenu": {
+      "text2": ["Параметры", "пайки"],
+      "desc": "Параметры пайки"
+    },
+    "PowerSavingMenu": {
+      "text2": ["Режимы", "сна"],
+      "desc": "Настройки режима ожидания"
+    },
+    "UIMenu": {
+      "text2": ["Параметры", "интерфейса"],
+      "desc": "Настройки пользовательского интерфейса"
+    },
+    "AdvancedMenu": {
+      "text2": ["Дополнител.", "настройки"],
+      "desc": "Дополнительные настройки"
+    }
+  },
+  "menuOptions": {
+    "DCInCutoff": {
+      "text2": ["Источник", "питания"],
+      "desc": "Источник питания. Устанавливает напряжение отсечки. (DC 10В) (S 3,3В на ячейку, без лимита мощности)"
+    },
+    "SleepTemperature": {
+      "text2": ["Темп.", "ожидания"],
+      "desc": "Температура режима ожидания"
+    },
+    "SleepTimeout": {
+      "text2": ["Таймаут", "ожидания"],
+      "desc": "Время до перехода в режим ожидания (Минуты | Секунды)"
+    },
+    "ShutdownTimeout": {
+      "text2": ["Таймаут", "выключения"],
+      "desc": "Время до отключения паяльника (Минуты)"
+    },
+    "MotionSensitivity": {
+      "text2": ["Чувствительн.", "акселерометра"],
+      "desc": "Чувствительность акселерометра (0=Выкл. | 1=Мин. | ... | 9=Макс.)"
+    },
+    "TemperatureUnit": {
+      "text2": ["Единицы", "температуры"],
+      "desc": "Единицы измерения температуры (C=Цельcия | F=Фаренгейта)"
+    },
+    "AdvancedIdle": {
+      "text2": ["Подробный", "реж. ожидания"],
+      "desc": "Отображать детальную информацию уменьшенным шрифтом на экране ожидания"
+    },
+    "DisplayRotation": {
+      "text2": ["Ориентация", "экрана"],
+      "desc": "Ориентация экрана (П=Правая рука | Л=Левая рука | А=Авто)"
+    },
+    "BoostTemperature": {
+      "text2": ["t° турбо", "режима"],
+      "desc": "Температура жала в турбо-режиме"
+    },
+    "AutoStart": {
+      "text2": ["Авто", "старт"],
+      "desc": "Режим, в котором запускается паяльник при подаче питания (В=Выкл. | П=Пайка | О=Ожидание | К=Ожидание при комн. темп.)"
+    },
+    "CooldownBlink": {
+      "text2": ["Мигание t°", "при остывании"],
+      "desc": "Мигать температурой на экране охлаждения, пока жало еще горячее"
+    },
+    "TemperatureCalibration": {
+      "text2": ["Калибровка", "температуры"],
+      "desc": "Калибровка термодатчика жала"
+    },
+    "SettingsReset": {
+      "text2": ["Сброс", "Настроек"],
+      "desc": "Сброс настроек к значеням по умолчанию"
+    },
+    "VoltageCalibration": {
+      "text2": ["Калибровка", "напряжения"],
+      "desc": "Калибровка входного напряжения (длинное нажатие для выхода)"
+    },
+    "AdvancedSoldering": {
+      "text2": ["Подробный", "экран пайки"],
+      "desc": "Показывать детальную информацию на экране пайки"
+    },
+    "ScrollingSpeed": {
+      "text2": ["Скорость", "текста"],
+      "desc": "Скорость прокрутки текста (М=медленно | Б=быстро)"
+    },
+    "QCMaxVoltage": {
+      "text2": ["Мощность", "питания"],
+      "desc": "Мощность используемого источника питания"
+    },
+    "PDNegTimeout": {
+      "text2": ["PD", "timeout"],
+      "desc": "PD negotiation timeout in 100ms steps for compatibility with some QC chargers (0: disabled)"
+    },
+    "PowerLimit": {
+      "text2": ["Предел", "мощности"],
+      "desc": "Максимальная мощность, которую может использовать паяльник (Ватт)"
+    },
+    "ReverseButtonTempChange": {
+      "text2": ["Инвертировать", "кнопки"],
+      "desc": "Инвертировать кнопки изменения температуры"
+    },
+    "TempChangeShortStep": {
+      "text2": ["Шаг темп.", "кор. наж."],
+      "desc": "Шаг изменения температуры при коротком нажатии кнопок"
+    },
+    "TempChangeLongStep": {
+      "text2": ["Шаг темп.", "длин. наж."],
+      "desc": "Шаг изменения температуры при длинном нажатии кнопок"
+    },
+    "PowerPulsePower": {
+      "text2": ["Сила имп.", "питания Вт"],
+      "desc": "Сила импульса удерживающего от сна повербанк или другой источник питания"
+    },
+    "HallEffSensitivity": {
+      "text2": ["Эффект Холла", "чувствительность"],
+      "desc": "Уровень чувствительности датчика холла в режиме сна (О=Отключено | Н=Низкий | С=Средний | В=Высокий)"
+    },
+    "LockingMode": {
+      "text2": ["Разрешить", "блок. кнопок"],
+      "desc": "При работе длинное нажатие обеих кнопок блокирует их (О=Отключено | Т=Только турбо | П=Полная блокировка)"
+    },
+    "MinVolCell": {
+      "text2": ["Мин.", "напр."],
+      "desc": "Минимальное разрешенное напряжение на ячейку (3S: 3 - 3,7V | 4-S: 2,4 - 3,7V)"
+    },
+    "AnimLoop": {
+      "text2": ["Зацикленная", "анимация"],
+      "desc": "Зацикленная анимация иконок в главном меню"
+    },
+    "AnimSpeed": {
+      "text2": ["Скорость", "анимации"],
+      "desc": "Скорость анимации иконок в главном меню (Милисекунды) (О=Отключено | Н=Низкий | С=Средний | В=Высокий)"
+    },
+    "PowerPulseWait": {
+      "text2": ["Power pulse", "wait time"],
+      "desc": "Time to wait before triggering every keep-awake pulse (x 2,5с)"
+    },
+    "PowerPulseDuration": {
+      "text2": ["Power pulse", "duration"],
+      "desc": "Keep-awake-pulse duration (x 250мс)"
+    },
+    "LanguageSwitch": {
+      "text2": ["Язык:", " RU     Русский"],
+      "desc": ""
+    },
+    "Brightness": {
+      "text2": ["Screen", "Brightness"],
+      "desc": "Adjust the contrast/brightness of the OLED screen"
+    },
+    "ColourInversion": {
+      "text2": ["Screen", "Invert"],
+      "desc": "Invert the colours of the OLED screen"
+    }
+  }
+}

Translations/translation_SK.json

@@ -0,0 +1,213 @@
+{
+  "languageCode": "SK",
+  "languageLocalName": "Slovenčina",
+  "fonts": ["ascii_basic", "latin_extended"],
+  "messages": {
+    "SettingsCalibrationDone": "Kalibrácia hotová!",
+    "SettingsCalibrationWarning": "Najprv sa prosím uistite, že hrot má izbovú teplotu!",
+    "SettingsResetWarning": "Naozaj chcete obnovit továrenské nastavenia?",
+    "UVLOWarningString": "Nízke U!",
+    "UndervoltageString": "Nízke napätie",
+    "InputVoltageString": "Vstupné U: ",
+    "WarningTipTempString": "Tep. hrotu: ",
+    "BadTipString": "ZLÝ HROT",
+    "SleepingSimpleString": "Chrr",
+    "SleepingAdvancedString": "Pokojový režim..",
+    "WarningSimpleString": "PÁLI",
+    "WarningAdvancedString": "HROT JE HORÚCI !",
+    "SleepingTipAdvancedString": "Hrot:",
+    "IdleTipString": "Hrot:",
+    "IdleSetString": "Cieľ:",
+    "TipDisconnectedString": "HROT ODPOJENÝ",
+    "SolderingAdvancedPowerPrompt": "Výkon: ",
+    "OffString": "Vyp",
+    "YourGainMessage": "Zisk:"
+  },
+  "messagesWarn": {
+    "ResetOKMessage": "Reset OK",
+    "SettingsResetMessage": ["Tov. nas. obnov.", ""],
+    "NoAccelerometerMessage": ["Bez pohyb. senz.", ""],
+    "NoPowerDeliveryMessage": ["Chýba čip USB-PD", ""],
+    "LockingKeysString": "ZABLOK.",
+    "UnlockingKeysString": "ODBLOK.",
+    "WarningKeysLockedString": "!ZABLOK!",
+    "WarningThermalRunaway": ["Thermal", "Runaway"]
+  },
+  "characters": {
+    "SettingRightChar": "P",
+    "SettingLeftChar": "L",
+    "SettingAutoChar": "A",
+    "SettingOffChar": "Z",
+    "SettingSlowChar": "P",
+    "SettingMediumChar": "M",
+    "SettingFastChar": "R",
+    "SettingStartNoneChar": "V",
+    "SettingStartSolderingChar": "Z",
+    "SettingStartSleepChar": "S",
+    "SettingStartSleepOffChar": "I",
+    "SettingSensitivityOff": "Z",
+    "SettingSensitivityLow": "N",
+    "SettingSensitivityMedium": "S",
+    "SettingSensitivityHigh": "V",
+    "SettingLockDisableChar": "Z",
+    "SettingLockBoostChar": "B",
+    "SettingLockFullChar": "P",
+    "SettingNAChar": "N/A"
+  },
+  "menuGroups": {
+    "PowerMenu": {
+      "text2": ["Power", "settings"],
+      "desc": "Power settings"
+    },
+    "SolderingMenu": {
+      "text2": ["Nastavenie", "spájkovania"],
+      "desc": "Nastavenie spájkovania"
+    },
+    "PowerSavingMenu": {
+      "text2": ["Úsporný", "režim"],
+      "desc": "Nastavenia režimov úspory energie"
+    },
+    "UIMenu": {
+      "text2": ["Nastavenie", "zobrazenia"],
+      "desc": "Nastavenie zobrazenia"
+    },
+    "AdvancedMenu": {
+      "text2": ["Pokročilé", "nastavenia"],
+      "desc": "Pokročilé nastavenia"
+    }
+  },
+  "menuOptions": {
+    "DCInCutoff": {
+      "text2": ["Zdroj", "napätia"],
+      "desc": "Zdroj napätia. Nastavenie napätia pre vypnutie (cutoff)  (DC=10V | nS=n*3.3V pre LiIon články)"
+    },
+    "SleepTemperature": {
+      "text2": ["Pokojová", "teplota"],
+      "desc": "Pokojová teplota (v nastavených jednotkách)"
+    },
+    "SleepTimeout": {
+      "text2": ["Pokojový", "režim po"],
+      "desc": "Pokojový režim po (S=sekundách | M=minútach)"
+    },
+    "ShutdownTimeout": {
+      "text2": ["Vypnutie", "po"],
+      "desc": "Čas na vypnutie (minúty)"
+    },
+    "MotionSensitivity": {
+      "text2": ["Citlivosť", "pohybu"],
+      "desc": "Citlivosť detekcie pohybu (0=Vyp | 1=Min | ... | 9=Max)"
+    },
+    "TemperatureUnit": {
+      "text2": ["Jednotka", "teploty"],
+      "desc": "Jednotky merania teploty (C=stupne Celzia | F=stupne Fahrenheita)"
+    },
+    "AdvancedIdle": {
+      "text2": ["Detaily v", "pokoj. režime"],
+      "desc": "Zobraziť detailné informácie v pokojovom režime (T=Zap | F=Vyp)"
+    },
+    "DisplayRotation": {
+      "text2": ["Orientácia", "displeja"],
+      "desc": "Orientácia displeja (P=Pravák | L=Ľavák | A=Auto)"
+    },
+    "BoostTemperature": {
+      "text2": ["Boost", "teplota"],
+      "desc": "Cieľová teplota pre prudký náhrev (v nastavených jednotkách)"
+    },
+    "AutoStart": {
+      "text2": ["Automatické", "spustenie"],
+      "desc": "Pri štarte spustiť režim spájkovania (V=Vyp | Z=Spájkovanie | S=Spanok | I=Spanok izbová teplota)"
+    },
+    "CooldownBlink": {
+      "text2": ["Blikanie pri", "chladnutí"],
+      "desc": "Blikanie ukazovateľa teploty počas chladnutia hrotu"
+    },
+    "TemperatureCalibration": {
+      "text2": ["Kalibrácia", "teploty"],
+      "desc": "Kalibrácia posunu teploty hrotu"
+    },
+    "SettingsReset": {
+      "text2": ["Obnovenie", "nastavení"],
+      "desc": "Obnovenie nastavení na pôvodné hodnoty"
+    },
+    "VoltageCalibration": {
+      "text2": ["Kalibrácia", "nap. napätia"],
+      "desc": "Kalibrácia napájacieho napätia. Krátke stlačenie mení nastavenie, dlhé stlačenie pre návrat"
+    },
+    "AdvancedSoldering": {
+      "text2": ["Detaily počas", "spájkovania"],
+      "desc": "Zobrazenie detailov počas spájkovania"
+    },
+    "ScrollingSpeed": {
+      "text2": ["Rýchlosť", "skrolovania"],
+      "desc": "Rýchlosť pohybu tohto textu"
+    },
+    "QCMaxVoltage": {
+      "text2": ["Obmedzenie", "výkonu"],
+      "desc": "Obmedzenie výkonu podľa použitého zdroja"
+    },
+    "PDNegTimeout": {
+      "text2": ["PD", "timeout"],
+      "desc": "PD negotiation timeout in 100ms steps for compatibility with some QC chargers (0: disabled)"
+    },
+    "PowerLimit": {
+      "text2": ["Obmedzenie", "výkonu"],
+      "desc": "Obmedzenie výkonu podľa použitého zdroja (watt)"
+    },
+    "ReverseButtonTempChange": {
+      "text2": ["Otočenie", "tlačidiel +/-"],
+      "desc": "Prehodenie tlačidiel na nastavovanie teploty"
+    },
+    "TempChangeShortStep": {
+      "text2": ["Malý krok", "teploty"],
+      "desc": "Zmena teploty pri krátkom stlačení tlačidla"
+    },
+    "TempChangeLongStep": {
+      "text2": ["Veľký krok", "teploty"],
+      "desc": "Zmena teploty pri držaní tlačidla"
+    },
+    "PowerPulsePower": {
+      "text2": ["Intenzita", "impulzu"],
+      "desc": "Impulz udržujúci napájací zdroj zapnutý (power banky) (watt)"
+    },
+    "HallEffSensitivity": {
+      "text2": ["Citliv.", "Hall"],
+      "desc": "Citlivosť Halloveho senzora pre detekciu spánku (Z=Zakázať | N=Nízka | S=Stredná | V=Vysoká)"
+    },
+    "LockingMode": {
+      "text2": ["Povoliť zámok", "tlačidiel"],
+      "desc": "Zamknutie tlačidiel - dlhé stlačenie oboch naraz počas spájkovania (Z=Zakázať | B=Okrem boost | P=Plné zamknutie)"
+    },
+    "MinVolCell": {
+      "text2": ["Minimum", "voltage"],
+      "desc": "Minimum allowed voltage per cell (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)"
+    },
+    "AnimLoop": {
+      "text2": ["Anim.", "loop"],
+      "desc": "Loop icon animations in root menu"
+    },
+    "AnimSpeed": {
+      "text2": ["Anim.", "speed"],
+      "desc": "Speed of icon animations in menu (O=off | L=low | M=medium | H=high)"
+    },
+    "PowerPulseWait": {
+      "text2": ["Power pulse", "wait time"],
+      "desc": "Time to wait before triggering every keep-awake pulse (x 2.5s)"
+    },
+    "PowerPulseDuration": {
+      "text2": ["Power pulse", "duration"],
+      "desc": "Keep-awake-pulse duration (x 250ms)"
+    },
+    "LanguageSwitch": {
+      "text2": ["Jazyk:", " SK  Slovenčina"],
+      "desc": ""
+    },
+    "Brightness": {
+      "text2": ["Screen", "Brightness"],
+      "desc": "Adjust the contrast/brightness of the OLED screen"
+    },
+    "ColourInversion": {
+      "text2": ["Screen", "Invert"],
+      "desc": "Invert the colours of the OLED screen"
+    }
+  }
+}

Translations/translation_SL.json

@@ -0,0 +1,213 @@
+{
+  "languageCode": "SL",
+  "languageLocalName": "Slovenščina",
+  "fonts": ["ascii_basic", "latin_extended"],
+  "messages": {
+    "SettingsCalibrationDone": "Kalibracija opravljena!",
+    "SettingsCalibrationWarning": "Pred nadaljevanjem mora biti konica segreta na sobno temperaturo!",
+    "SettingsResetWarning": "Res želite ponastaviti na privzete nastavitve?",
+    "UVLOWarningString": "NIZKA U",
+    "UndervoltageString": "Nizka napetost",
+    "InputVoltageString": "Vhodna U: ",
+    "WarningTipTempString": "Temp. kon.: ",
+    "BadTipString": "KONICA?",
+    "SleepingSimpleString": "Zzzz",
+    "SleepingAdvancedString": "Spim...",
+    "WarningSimpleString": "VROČ",
+    "WarningAdvancedString": "!!VROČA KONICA!!",
+    "SleepingTipAdvancedString": "Konica",
+    "IdleTipString": "Kon:",
+    "IdleSetString": " temp:",
+    "TipDisconnectedString": "NI KONICE",
+    "SolderingAdvancedPowerPrompt": "Moč: ",
+    "OffString": "Off",
+    "YourGainMessage": "Ojačenje"
+  },
+  "messagesWarn": {
+    "ResetOKMessage": "Reset OK",
+    "SettingsResetMessage": ["Nastavitve OK!", ""],
+    "NoAccelerometerMessage": ["Ni pospeševalnik", ""],
+    "NoPowerDeliveryMessage": ["Ni USB-PD čipa!", ""],
+    "LockingKeysString": "ZAKLENJ.",
+    "UnlockingKeysString": "ODKLENJ.",
+    "WarningKeysLockedString": "ZAKLENJ.",
+    "WarningThermalRunaway": ["Thermal", "Runaway"]
+  },
+  "characters": {
+    "SettingRightChar": "D",
+    "SettingLeftChar": "L",
+    "SettingAutoChar": "S",
+    "SettingOffChar": "U",
+    "SettingSlowChar": "P",
+    "SettingMediumChar": "M",
+    "SettingFastChar": "H",
+    "SettingStartNoneChar": "U",
+    "SettingStartSolderingChar": "S",
+    "SettingStartSleepChar": "Z",
+    "SettingStartSleepOffChar": "V",
+    "SettingSensitivityOff": "U",
+    "SettingSensitivityLow": "N",
+    "SettingSensitivityMedium": "S",
+    "SettingSensitivityHigh": "V",
+    "SettingLockDisableChar": "O",
+    "SettingLockBoostChar": "L",
+    "SettingLockFullChar": "P",
+    "SettingNAChar": "N/A"
+  },
+  "menuGroups": {
+    "PowerMenu": {
+      "text2": ["Power", "settings"],
+      "desc": "Power settings"
+    },
+    "SolderingMenu": {
+      "text2": ["Nastavitve", "spajkanja"],
+      "desc": "Nastavitve spajkanja"
+    },
+    "PowerSavingMenu": {
+      "text2": ["Način", "spanja"],
+      "desc": "Nastavitve varčevanja z energijo"
+    },
+    "UIMenu": {
+      "text2": ["Uporabniški", "vmesnik"],
+      "desc": "Nastavitve uporabniškega vmesnika"
+    },
+    "AdvancedMenu": {
+      "text2": ["Napredne", "možnosti"],
+      "desc": "Napredne možnosti"
+    }
+  },
+  "menuOptions": {
+    "DCInCutoff": {
+      "text2": ["Vir", "napajanja"],
+      "desc": "Vir napajanja. Nastavi napetost izklopa. (DC 10V) (S 3.3V na celico)"
+    },
+    "SleepTemperature": {
+      "text2": ["Temp. med", "spanjem"],
+      "desc": "Temperatura med spanjem"
+    },
+    "SleepTimeout": {
+      "text2": ["Čas do", "spanja"],
+      "desc": "Čas pred spanjem (S=sekunde | M=minute)"
+    },
+    "ShutdownTimeout": {
+      "text2": ["Čas do", "izklopa"],
+      "desc": "Čas do izklopa (M=minute)"
+    },
+    "MotionSensitivity": {
+      "text2": ["Občutljivost", "premikanja"],
+      "desc": "0=izklopljeno | 1=najmanjša | ... | 9=največja"
+    },
+    "TemperatureUnit": {
+      "text2": ["Enota za", "temperaturo"],
+      "desc": "Enota za temperaturo (C=celzij | F=fahrenheit)"
+    },
+    "AdvancedIdle": {
+      "text2": ["Več info. na", "mir. zaslonu"],
+      "desc": "Prikaži več informacij z manjšo pisavo na mirovalnem zaslonu."
+    },
+    "DisplayRotation": {
+      "text2": ["Orientacija", "zaslona"],
+      "desc": "D=desničar | L=levičar | S=samodejno"
+    },
+    "BoostTemperature": {
+      "text2": ["Pospešena", "temp."],
+      "desc": "Temperatura v pospešenem načinu"
+    },
+    "AutoStart": {
+      "text2": ["Samodejni", "zagon"],
+      "desc": "Samodejno gretje konice ob vklopu (U=ugasnjeno | S=spajkanje | Z=spanje | V=spanje na sobni temperaturi)"
+    },
+    "CooldownBlink": {
+      "text2": ["Utripanje med", "hlajenjem"],
+      "desc": "Ko je konica še vroča, utripaj prikaz temperature med hlajenjem."
+    },
+    "TemperatureCalibration": {
+      "text2": ["Kalibriram", "temperaturo?"],
+      "desc": "Kalibracija temperature na konici."
+    },
+    "SettingsReset": {
+      "text2": ["Tovarniške", "nastavitve?"],
+      "desc": "Ponastavitev vseh nastavitev"
+    },
+    "VoltageCalibration": {
+      "text2": ["Kalibriram", "vhodno napetost?"],
+      "desc": "Kalibracija VIN (nastavitve z gumbi, dolg pritisk za izhod)"
+    },
+    "AdvancedSoldering": {
+      "text2": ["Več info na", "zaslonu spaj."],
+      "desc": "Prikaže več informacij z manjšo pisavo na zaslonu med spajkanjem."
+    },
+    "ScrollingSpeed": {
+      "text2": ["Hitrost", "besedila"],
+      "desc": "Hitrost, s katero se prikazuje besedilo (P=počasi | H=hitro)"
+    },
+    "QCMaxVoltage": {
+      "text2": ["QC", "napetost"],
+      "desc": "Moč napajalnega vira v vatih [W]"
+    },
+    "PDNegTimeout": {
+      "text2": ["PD", "timeout"],
+      "desc": "PD negotiation timeout in 100ms steps for compatibility with some QC chargers (0: disabled)"
+    },
+    "PowerLimit": {
+      "text2": ["Meja", "moči"],
+      "desc": "Največja dovoljena moč v vatih [W]"
+    },
+    "ReverseButtonTempChange": {
+      "text2": ["Obrni", "tipki + -?"],
+      "desc": "Zamenjaj funkciji gumbov."
+    },
+    "TempChangeShortStep": {
+      "text2": ["Kratka sprememba", "temperature?"],
+      "desc": "Temperatura se spremeni ob kratkem pritisku na gumb."
+    },
+    "TempChangeLongStep": {
+      "text2": ["Dolga sprememba", "temperature?"],
+      "desc": "Temperatura se spremeni ob dolgem pritisku na gumb."
+    },
+    "PowerPulsePower": {
+      "text2": ["Pulz", "moči"],
+      "desc": "Velikost moči za vzdrževanje budnosti."
+    },
+    "HallEffSensitivity": {
+      "text2": ["Občut.", "Hall son"],
+      "desc": "Občutljivost Hallove sonde za zaznavanje spanja (U=ugasnjen | N=nizka | S=srednja | V=visoka)"
+    },
+    "LockingMode": {
+      "text2": ["Omogoči", "zaklep gumbov"],
+      "desc": "Za zaklep med spajkanjem drži oba gumba (O=onemogoči | L=le pospešeno | P=polno)"
+    },
+    "MinVolCell": {
+      "text2": ["Minimum", "voltage"],
+      "desc": "Minimum allowed voltage per cell (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)"
+    },
+    "AnimLoop": {
+      "text2": ["Anim.", "loop"],
+      "desc": "Loop icon animations in root menu"
+    },
+    "AnimSpeed": {
+      "text2": ["Anim.", "speed"],
+      "desc": "Speed of icon animations in menu (O=off | L=low | M=medium | H=high)"
+    },
+    "PowerPulseWait": {
+      "text2": ["Power pulse", "wait time"],
+      "desc": "Time to wait before triggering every keep-awake pulse (x 2.5s)"
+    },
+    "PowerPulseDuration": {
+      "text2": ["Power pulse", "duration"],
+      "desc": "Keep-awake-pulse duration (x 250ms)"
+    },
+    "LanguageSwitch": {
+      "text2": ["Jezik:", " SL Slovenščina"],
+      "desc": ""
+    },
+    "Brightness": {
+      "text2": ["Screen", "Brightness"],
+      "desc": "Adjust the contrast/brightness of the OLED screen"
+    },
+    "ColourInversion": {
+      "text2": ["Screen", "Invert"],
+      "desc": "Invert the colours of the OLED screen"
+    }
+  }
+}