Merge branch 'master' into messing_with_pd

2025-02-26 07:53:55 +00:00 · 2021-04-08 11:00:21 +10:00
parent 4259095562 0cd6382c02
commit 7a437b9265
2 changed files with 204 additions and 1 deletions
--- a/Translations/translation_ZH_CN.json
+++ b/Translations/translation_ZH_CN.json
@@ -0,0 +1,203 @@
+{
+	"languageCode": "ZH_CN",
+	"languageLocalName": "简体中文",
+	"cyrillicGlyphs": false,
+	"tempUnitFahrenheit": true,
+	"messages": {
+		"SettingsCalibrationDone": "校正完成！",
+		"SettingsCalibrationWarning": "开始温度校正前，请先确定铬铁头正处于室温！",
+		"SettingsResetWarning": "你是否确定要将全部设置重置为默认值？",
+		"UVLOWarningString": "电压过低",
+		"UndervoltageString": "Undervoltage",
+		"InputVoltageString": "Input V: ",
+		"WarningTipTempString": "Tip temp: ",
+		"BadTipString": "BAD TIP",
+		"SleepingSimpleString": "Zzzz",
+		"SleepingAdvancedString": "Sleeping...",
+		"WarningSimpleString": "HOT!",
+		"WarningAdvancedString": "!!! HOT TIP !!!",
+		"SleepingTipAdvancedString": "Tip:",
+		"IdleTipString": "Tip:",
+		"IdleSetString": " Set:",
+		"TipDisconnectedString": "NO TIP",
+		"SolderingAdvancedPowerPrompt": "Power: ",
+		"OffString": "关",
+		"YourGainMessage": "Your gain:"
+	},
+	"messagesWarn": {
+		"ResetOKMessage": "已重置！",
+		"SettingsResetMessage": "设置已被重置！",
+		"NoAccelerometerMessage": [
+			"No accelerometer",
+			"detected!"
+		],
+		"NoPowerDeliveryMessage": [
+			"No USB-PD IC",
+			"detected!"
+		],
+		"LockingKeysString": "已锁定",
+		"UnlockingKeysString": "已解除锁定",
+		"WarningKeysLockedString": "!按键锁定!"
+	},
+	"characters": {
+		"SettingRightChar": "右",
+		"SettingLeftChar": "左",
+		"SettingAutoChar": "自",
+		"SettingFastChar": "快",
+		"SettingSlowChar": "慢",
+		"SettingMediumChar": "中",
+		"SettingOffChar": "关",
+		"SettingStartSolderingChar": "焊",
+		"SettingStartSleepChar": "待",
+		"SettingStartSleepOffChar": "室",
+		"SettingStartNoneChar": "无",
+		"SettingSensitivityOff": "关",
+		"SettingSensitivityLow": "低",
+		"SettingSensitivityMedium": "中",
+		"SettingSensitivityHigh": "高",
+		"SettingLockDisableChar": "无",
+		"SettingLockBoostChar": "增",
+		"SettingLockFullChar": "全",
+		"SettingNAChar": "不适用"
+	},
+	"menuGroups": {
+		"PowerMenu": {
+			"text2": "电源设置",
+			"desc": "电源设置"
+		},
+		"SolderingMenu": {
+			"text2": "焊接设置",
+			"desc": "焊接设置"
+		},
+		"PowerSavingMenu": {
+			"text2": "待机设置",
+			"desc": "自动待机省电设置"
+		},
+		"UIMenu": {
+			"text2": "使用者介面",
+			"desc": "使用者介面设置"
+		},
+		"AdvancedMenu": {
+			"text2": "进阶设置",
+			"desc": "进阶设置"
+		}
+	},
+	"menuOptions": {
+		"DCInCutoff": {
+			"text2": "电源",
+			"desc": "输入电源；设置自动停机电压 <DC 10V> <S 锂电池，以每颗3.3V计算；此设置会禁用功率限制>"
+		},
+		"SleepTemperature": {
+			"text2": "待机温度",
+			"desc": "于待机模式时的铬铁头温度"
+		},
+		"SleepTimeout": {
+			"text2": "待机延时",
+			"desc": "自动进入待机模式前的闲置等候时间 <S=秒 | M=分钟>"
+		},
+		"ShutdownTimeout": {
+			"text2": "自动关机",
+			"desc": "自动关机前的闲置等候时间 <M=分钟>"
+		},
+		"MotionSensitivity": {
+			"text2": "动作灵敏度",
+			"desc": "0=禁用 | 1=最低灵敏度 | ... | 9=最高灵敏度"
+		},
+		"TemperatureUnit": {
+			"text2": "温标",
+			"desc": "C=摄氏 | F=华氏"
+		},
+		"AdvancedIdle": {
+			"text2": "详细闲置画面",
+			"desc": "于闲置画面以英语小字显示详细信息"
+		},
+		"DisplayRotation": {
+			"text2": "画面方向",
+			"desc": "A=自动 | L=使用左手 | R=使用右手"
+		},
+		"BoostTemperature": {
+			"text2": "增热温度",
+			"desc": "于增热模式时使用的温度"
+		},
+		"AutoStart": {
+			"text2": "自动启用",
+			"desc": "开机时自动启用 <无=禁用 | 焊=焊接模式 | 待=待机模式 | 室=室温待机>"
+		},
+		"CooldownBlink": {
+			"text2": "降温时闪烁",
+			"desc": "停止加热之后，当铬铁头仍处于高温时闪烁画面"
+		},
+		"TemperatureCalibration": {
+			"text2": "温度校正？",
+			"desc": "开始校正铬铁头温度位移"
+		},
+		"SettingsReset": {
+			"text2": "全部重置？",
+			"desc": "将所有设置重置为默认值"
+		},
+		"VoltageCalibration": {
+			"text2": "输入电压校正？",
+			"desc": "开始校正VIN输入电压 <长按以退出>"
+		},
+		"AdvancedSoldering": {
+			"text2": "详细焊接画面",
+			"desc": "于焊接模式画面以英语小字显示详细信息"
+		},
+		"ScrollingSpeed": {
+			"text2": "卷动速度",
+			"desc": "解说文字的卷动速度"
+		},
+		"QCMaxVoltage": {
+			"text2": "QC电压",
+			"desc": "使用QC电源时请求的最高目标电压"
+		},
+		"PowerLimit": {
+			"text2": "功率限制",
+			"desc": "限制铬铁可用的最大功率 <W=watt（瓦特）>"
+		},
+		"ReverseButtonTempChange": {
+			"text2": "调换加减键",
+			"desc": "调校温度时调换加减键的方向"
+		},
+		"TempChangeShortStep": {
+			"text2": "温度调整 短",
+			"desc": "调校温度时短按一下的温度变幅"
+		},
+		"TempChangeLongStep": {
+			"text2": "温度调整 长",
+			"desc": "调校温度时长按按键的温度变幅"
+		},
+		"PowerPulsePower": {
+			"text2": "电源脉冲",
+			"desc": "为保持电源唤醒而通电所用的功率 <watt（瓦特）>"
+		},
+		"HallEffSensitivity": {
+			"text2": "磁场灵敏度",
+			"desc": "磁场感应器用作启动待机模式的灵敏度 <关=禁用 | 低=最低灵敏度 | 中=中等灵敏度 | 高=最高灵敏度>"
+		},
+		"LockingMode": {
+			"text2": "按键锁定",
+			"desc": "于焊接模式时，同时长按两个按键启用按键锁定 <无=禁用 | 增=锁定增热模式 | 全=锁定全部>"
+		},
+		"MinVolCell": {
+			"text2": "最低电压",
+			"desc": "每颗电池的最低可用电压 <伏特> <3S: 3.0V - 3.7V, 4/5/6S: 2.4V - 3.7V>"
+		},
+		"AnimLoop": {
+			"text2": "动画循环",
+			"desc": "循环显示功能表图示动画"
+		},
+		"AnimSpeed": {
+			"text2": "动画速度",
+			"desc": "功能表图示动画的速度 <关=不显示动画 | 慢=慢速 | 中=中速 | 快=快速>"
+		},
+		"PowerPulseWait": {
+			"text2": "电源脉冲间隔",
+			"desc": "为保持电源唤醒，每次通电之间的间隔时间 <x2.5s（秒）>"
+		},
+		"PowerPulseDuration": {
+			"text2": "电源脉冲时长",
+			"desc": "为保持电源唤醒，每次通电脉冲的时间长度 <x250ms（亳秒）>"
+		}
+	}
+}
--- a/source/Makefile
+++ b/source/Makefile
@@ -10,7 +10,7 @@ ifneq ($(model),$(filter $(model),$(ALL_MODELS)))
 $(error Invalid model '$(model)', valid options are: $(ALL_MODELS))
 endif

-ALL_LANGUAGES=BG CS DA DE EN ES FI FR HR HU IT LT NL NL_BE NO PL PT RU SK SL SR_CYRL SR_LATN SV TR UK YUE_HK ZH_TW
+ALL_LANGUAGES=BG CS DA DE EN ES FI FR HR HU IT LT NL NL_BE NO PL PT RU SK SL SR_CYRL SR_LATN SV TR UK YUE_HK ZH_CN ZH_TW


 # Enumerate all of the include directories