Update push for git permissions

https://github.com/actions/checkout/issues/760

.flake8

@@ -0,0 +1,3 @@
+[flake8]
+ignore = E203, E266, E501, W503, F403, F401
+max-line-length = 200

.gitattributes

@@ -0,0 +1,2 @@
+# Ignore all differences in line endings
+*        -crlf

.github/FUNDING.yml

@@ -0,0 +1,4 @@
+# These are supported funding model platforms
+
+ko_fi: ralim
+custom: https://paypal.me/RalimTek

.github/ISSUE_TEMPLATE/bug_report.md

@@ -0,0 +1,32 @@
+---
+name: Bug report
+about: Create a report to help us improve
+title: ''
+labels: ''
+assignees: Ralim
+
+---
+
+**Describe the bug**
+<!-- A clear and concise description of what the bug is. -->
+
+**To Reproduce**
+<!-- Steps to reproduce the behavior:
+1. Go to '...'
+2. Click on '...'
+3. Scroll down to '...'
+4. See error -->
+
+**Expected behavior**
+<!-- A clear and concise description of what you expected to happen. -->
+
+
+**Details of your device:**
+ <!-- You can get these from the debug menu by holding the rear button down and then using the front one to cycle through -->
+ - Device: [e.g. TS80/Pinecil etc]
+ - Release: [eg 2.15.40087E6]
+ - Power adapter being used:
+ - If this is an accelerometer related issue, please include its model number here:
+
+**Additional context**
+<!-- Add any other context about the problem here. -->

.github/ISSUE_TEMPLATE/everything-else--questions--notes-etc-.md

@@ -0,0 +1,10 @@
+---
+name: Everything else (Questions, notes etc)
+about: For remarking questions or notes
+title: ''
+labels: ''
+assignees: ''
+
+---
+
+<!-- **Questions are preferred to be kept to the discussions tab where possible, but otherwise go for it. be polite and as clear as possible.** -->

.github/ISSUE_TEMPLATE/feature_request.md

@@ -0,0 +1,20 @@
+---
+name: Feature request
+about: Suggest an idea for this project
+title: ''
+labels: enhancement
+assignees: Ralim
+
+---
+
+**Is your feature request related to a problem? Please describe.**
+<!-- A clear and concise description of what the problem is. Ex. I'm always frustrated when [...] -->
+
+**Describe the solution you'd like**
+<!-- A clear and concise description of what you want to happen. -->
+
+**Describe alternatives you've considered**
+<!-- A clear and concise description of any alternative solutions or features you've considered. -->
+
+**Additional context**
+<!-- Add any other context or screenshots about the feature request here. -->

.github/dependabot.yml

@@ -0,0 +1,11 @@
+version: 2
+updates:
+  - package-ecosystem: "github-actions"
+    directory: "/"
+    schedule:
+      # Check for updates to GitHub Actions every weekday
+      interval: "weekly"
+    open-pull-requests-limit: 10
+    commit-message:
+      prefix: chore
+      include: scope

.github/workflows/push.yml

@@ -0,0 +1,170 @@
+name: CI
+
+on: [push, pull_request]
+
+jobs:
+  build:
+    runs-on: ubuntu-20.04
+    container:
+      image: alpine:3.15
+    strategy:
+      matrix:
+        model: ["TS100", "TS80", "TS80P", "Pinecil", "MHP30"]
+      fail-fast: true
+
+    steps:
+      - name: Install dependencies (apk)
+        run: apk add --no-cache gcc-riscv-none-elf gcc-arm-none-eabi newlib-riscv-none-elf newlib-arm-none-eabi findutils python3 py3-pip make git bash
+
+      - name: Install dependencies (python)
+        run: python3 -m pip install bdflib
+
+      - uses: actions/checkout@v3
+        with:
+          submodules: true
+          
+      - name: Git ownership exception
+        run: git config --global --add safe.directory /__w/IronOS/IronOS && git config --global safe.directory "$GITHUB_WORKSPACE"
+
+      - name: build ${{ matrix.model }}
+        run: cd source && ./build.sh -m ${{ matrix.model }}
+
+      - name: copy license text
+        run: |
+          cp LICENSE source/Hexfile/LICENSE
+          cp LICENSE_RELEASE.md source/Hexfile/LICENSE_RELEASE.md
+
+      - name: Archive ${{ matrix.model }} artifacts
+        uses: actions/upload-artifact@v3
+        with:
+          name: ${{ matrix.model }}
+          path: |
+            source/Hexfile/${{ matrix.model }}_*.hex
+            source/Hexfile/${{ matrix.model }}_*.dfu
+            source/Hexfile/LICENSE
+            source/Hexfile/LICENSE_RELEASE.md
+          if-no-files-found: error
+
+      - name: Generate json index file
+        run: cd source && python3 metadata.py ${{ matrix.model }}.json
+
+      - name: Archive ${{ matrix.model }} index file
+        uses: actions/upload-artifact@v3
+        with:
+          name: metadata
+          path: source/Hexfile/${{ matrix.model }}.json
+
+  build_multi-lang:
+    runs-on: ubuntu-20.04
+    container:
+      image: alpine:3.15
+    strategy:
+      matrix:
+        model: ["Pinecil"]
+      fail-fast: true
+
+    steps:
+      - name: Install dependencies (apk)
+        run: apk add --no-cache gcc-riscv-none-elf gcc-arm-none-eabi newlib-riscv-none-elf newlib-arm-none-eabi findutils python3 py3-pip make git bash musl-dev
+      - name: Install dependencies (python)
+        run: python3 -m pip install bdflib
+
+      - uses: actions/checkout@v3
+        with:
+          submodules: true
+      
+      - name: Git ownership exception
+        run: git config --global --add safe.directory /__w/IronOS/IronOS && git config --global safe.directory "$GITHUB_WORKSPACE"
+      
+      - name: build ${{ matrix.model }}
+        run: cd source && make -j$(nproc) model="${{ matrix.model }}" firmware-multi_compressed_European firmware-multi_compressed_Bulgarian+Russian+Serbian+Ukrainian firmware-multi_Chinese+Japanese
+
+      - name: copy license text
+        run: |
+          cp LICENSE source/Hexfile/LICENSE
+          cp LICENSE_RELEASE.md source/Hexfile/LICENSE_RELEASE.md
+
+      - name: Archive ${{ matrix.model }} artifacts
+        uses: actions/upload-artifact@v3
+        with:
+          name: ${{ matrix.model }}_multi-lang
+          path: |
+            source/Hexfile/${{ matrix.model }}_*.hex
+            source/Hexfile/${{ matrix.model }}_*.dfu
+            source/Hexfile/LICENSE
+            source/Hexfile/LICENSE_RELEASE.md
+          if-no-files-found: error
+
+      - name: Generate json index file
+        run: cd source && python3 metadata.py Pinecil_multi-lang.json
+
+      - name: Archive ${{ matrix.model }} index file
+        uses: actions/upload-artifact@v3
+        with:
+          name: metadata
+          path: source/Hexfile/Pinecil_multi-lang.json
+
+  tests:
+    runs-on: ubuntu-20.04
+    container:
+      image: alpine:3.15
+
+    steps:
+      - name: deps
+        run: apk add --no-cache python3 py3-pip make git bash findutils gcc musl-dev
+
+      - uses: actions/checkout@v3
+        with:
+          submodules: true
+
+      - name: install black
+        run: python3 -m pip install bdflib
+
+      - name: Run python tests
+        run: cd Translations && chmod +x make_translation_test.py && ./make_translation_test.py
+
+      - name: Run BriefLZ tests
+        run: |
+          cd source
+          make Objects/host/brieflz/libbrieflz.so
+          cd ../Translations
+          chmod +x brieflz_test.py
+          ./brieflz_test.py
+
+  check_formatting:
+    runs-on: ubuntu-20.04
+    container:
+      image: alpine:3.15
+
+    steps:
+      - name: deps
+        run: apk add --no-cache python3 py3-pip make git
+
+      - uses: actions/checkout@v3
+        with:
+          submodules: true
+
+      - name: install black
+        run: python3 -m pip install bdflib black flake8
+
+      - name: Check formatting with clang-format
+        run: cd source && make clean && make check-style
+
+      - name: Check python formatting with black
+        run: black --check Translations
+
+      - name: Check python with flake8
+        run: flake8 Translations
+
+  shellcheck:
+    name: runner / shellcheck
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@v3
+      - name: shellcheck
+        uses: reviewdog/action-shellcheck@v1
+        with:
+          github_token: ${{ secrets.github_token }}
+          reporter: github-pr-review # Change reporter.
+          exclude: "./.git/*" # Optional.
+          check_all_files_with_shebangs: "false" # Optional.

.gitignore

@@ -1,46 +1,179 @@
-# Object files
-*.o
-*.ko
-*.obj
-*.elf
-*.d
-*.DS_Store
-# Precompiled Headers
-*.gch
-*.pch
-
-# Libraries
-*.lib
-*.a
-*.la
-*.lo
-
-# Shared objects (inc. Windows DLLs)
-*.dll
-*.so
-*.so.*
-*.dylib
-
-# Executables
-*.exe
-*.out
-*.app
-*.i*86
-*.x86_64
-workspace/*.hex
-
-# Debug files
-*.dSYM/
-*.su
-workspace/ts100/Debug/*
-workspace/.metadata/*
-
-workspace/ts100/.settings/language.settings.xml
-workspace/ts100/.cproject
-TS100/KiCad/TS100.bak
-Logo GUI/TS100 Logo Editor/TS100 Logo Editor/obj/
-Logo GUI/TS100 Logo Editor/TS100 Logo Editor/bin/
-workspace/ts100/ts100.xml
-workspace/ts100_old/*
-*.cache
-workspace/TS100/.settings/language.settings.xml
+# Object files
+*.o
+*.ko
+*.obj
+*.elf
+*.d
+*.DS_Store
+# Precompiled Headers
+*.gch
+*.pch
+
+# Libraries
+*.lib
+*.a
+*.la
+*.lo
+
+# Shared objects (inc. Windows DLLs)
+*.dll
+*.so
+*.so.*
+*.dylib
+
+# Executables
+*.exe
+*.out
+*.app
+*.i*86
+*.x86_64
+
+# Debug files
+*.dSYM/
+*.su
+source/.metadata/*
+
+TS100/KiCad/TS100.bak
+Logo GUI/TS100 Logo Editor/TS100 Logo Editor/obj/
+Logo GUI/TS100 Logo Editor/TS100 Logo Editor/bin/
+*.cache
+Translation Editor/.vscode/
+Translation Editor/__pycache__/
+*.pyc
+*.lst
+*.mk
+*.list
+source/Hexfile/
+source/Objects/
+
+ci/artefacts/
+ci/secrets/unencrypted/
+codeship.aes
+.vscode/settings.json
+
+# Auto generated files
+source/Core/Inc/unit.h
+source/Core/Gen/
+# IDE configs
+.vs/*
+.settings/*
+..cproject.swp
+
+# Visual Studios
+.vscode/*
+!.vscode/settings.json
+!.vscode/tasks.json
+!.vscode/launch.json
+!.vscode/extensions.json
+
+# Eclipse
+.metadata
+bin/
+tmp/
+*.tmp
+*.bak
+*.swp
+*~.nib
+local.properties
+.settings/
+.loadpath
+.recommenders
+
+# External tool builders
+.externalToolBuilders/
+
+# Locally stored "Eclipse launch configurations"
+*.launch
+
+# PyDev specific (Python IDE for Eclipse)
+*.pydevproject
+
+# CDT- autotools
+.autotools
+
+# Java annotation processor (APT)
+.factorypath
+
+# PDT-specific (PHP Development Tools)
+.buildpath
+
+# sbteclipse plugin
+.target
+
+# Tern plugin
+.tern-project
+
+# TeXlipse plugin
+.texlipse
+
+# STS (Spring Tool Suite)
+.springBeans
+
+# Code Recommenders
+.recommenders/
+
+# Annotation Processing
+.apt_generated/
+
+# Scala IDE specific (Scala & Java development for Eclipse)
+.cache-main
+.scala_dependencies
+.worksheet
+
+# Jetbrains
+# Covers JetBrains IDEs: IntelliJ, RubyMine, PhpStorm, AppCode, PyCharm, CLion, Android Studio and WebStorm
+# Reference: https://intellij-support.jetbrains.com/hc/en-us/articles/206544839
+
+# User-specific stuff
+.idea/**/workspace.xml
+.idea/**/tasks.xml
+.idea/**/usage.statistics.xml
+.idea/**/dictionaries
+.idea/**/shelf
+
+# Sensitive or high-churn files
+.idea/**/dataSources/
+.idea/**/dataSources.ids
+.idea/**/dataSources.local.xml
+.idea/**/sqlDataSources.xml
+.idea/**/dynamic.xml
+.idea/**/uiDesigner.xml
+.idea/**/dbnavigator.xml
+
+# Gradle
+.idea/**/gradle.xml
+.idea/**/libraries
+
+# CMake
+cmake-build-*/
+
+# Mongo Explorer plugin
+.idea/**/mongoSettings.xml
+
+# File-based project format
+*.iws
+
+# IntelliJ
+out/
+
+# mpeltonen/sbt-idea plugin
+.idea_modules/
+
+# JIRA plugin
+atlassian-ide-plugin.xml
+
+# Cursive Clojure plugin
+.idea/replstate.xml
+
+# Crashlytics plugin (for Android Studio and IntelliJ)
+com_crashlytics_export_strings.xml
+crashlytics.properties
+crashlytics-build.properties
+fabric.properties
+
+# Editor-based Rest Client
+.idea/httpRequests
+
+CoreCompileInputs.cache
+.vscode/settings.json
+source/compile_commands.json

.gitmodules

@@ -0,0 +1,3 @@
+[submodule "source/Core/Drivers/usb-pd"]
+	path = source/Core/Drivers/usb-pd
+	url = https://github.com/Ralim/usb-pd.git

Bootup Logo/Logo GUI/TS100 Logo Editor/TS100 Logo Editor.sln

@@ -1,22 +0,0 @@
-
-Microsoft Visual Studio Solution File, Format Version 12.00
-# Visual Studio 15
-VisualStudioVersion = 15.0.26430.15
-MinimumVisualStudioVersion = 10.0.40219.1
-Project("{FAE04EC0-301F-11D3-BF4B-00C04F79EFBC}") = "TS100 Logo Editor", "TS100 Logo Editor\TS100 Logo Editor.csproj", "{206C8AEF-3BE6-44E9-A1B0-25BF3805F1CB}"
-EndProject
-Global
-	GlobalSection(SolutionConfigurationPlatforms) = preSolution
-		Debug|Any CPU = Debug|Any CPU
-		Release|Any CPU = Release|Any CPU
-	EndGlobalSection
-	GlobalSection(ProjectConfigurationPlatforms) = postSolution
-		{206C8AEF-3BE6-44E9-A1B0-25BF3805F1CB}.Debug|Any CPU.ActiveCfg = Debug|Any CPU
-		{206C8AEF-3BE6-44E9-A1B0-25BF3805F1CB}.Debug|Any CPU.Build.0 = Debug|Any CPU
-		{206C8AEF-3BE6-44E9-A1B0-25BF3805F1CB}.Release|Any CPU.ActiveCfg = Release|Any CPU
-		{206C8AEF-3BE6-44E9-A1B0-25BF3805F1CB}.Release|Any CPU.Build.0 = Release|Any CPU
-	EndGlobalSection
-	GlobalSection(SolutionProperties) = preSolution
-		HideSolutionNode = FALSE
-	EndGlobalSection
-EndGlobal

Bootup Logo/Logo GUI/TS100 Logo Editor/TS100 Logo Editor.userprefs

@@ -1,8 +0,0 @@
-<Properties StartupItem="TS100 Logo Editor/TS100 Logo Editor.csproj">
-  <MonoDevelop.Ide.Workspace ActiveConfiguration="Debug" />
-  <MonoDevelop.Ide.Workbench />
-  <MonoDevelop.Ide.DebuggingService.Breakpoints>
-    <BreakpointStore />
-  </MonoDevelop.Ide.DebuggingService.Breakpoints>
-  <MonoDevelop.Ide.DebuggingService.PinnedWatches />
-</Properties>

Bootup Logo/Logo GUI/TS100 Logo Editor/TS100 Logo Editor/App.config

@@ -1,6 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<configuration>
-    <startup> 
-        <supportedRuntime version="v4.0" sku=".NETFramework,Version=v4.0"/>
-    </startup>
-</configuration>

Bootup Logo/Logo GUI/TS100 Logo Editor/TS100 Logo Editor/Form1.Designer.cs

@@ -1,209 +0,0 @@
-namespace TS100_Logo_Editor
-{
-    partial class Form1
-    {
-        /// <summary>
-        /// Required designer variable.
-        /// </summary>
-        private System.ComponentModel.IContainer components = null;
-
-        /// <summary>
-        /// Clean up any resources being used.
-        /// </summary>
-        /// <param name="disposing">true if managed resources should be disposed; otherwise, false.</param>
-        protected override void Dispose(bool disposing)
-        {
-            if (disposing && (components != null))
-            {
-                components.Dispose();
-            }
-            base.Dispose(disposing);
-        }
-
-        #region Windows Form Designer generated code
-
-        /// <summary>
-        /// Required method for Designer support - do not modify
-        /// the contents of this method with the code editor.
-        /// </summary>
-        private void InitializeComponent()
-        {
-            this.groupBox1 = new System.Windows.Forms.GroupBox();
-            this.btnLoadImage = new System.Windows.Forms.Button();
-            this.groupBox2 = new System.Windows.Forms.GroupBox();
-            this.cbInvertImage = new System.Windows.Forms.CheckBox();
-            this.gbScaling = new System.Windows.Forms.GroupBox();
-            this.rbScaleStretch = new System.Windows.Forms.RadioButton();
-            this.rbScaleFit = new System.Windows.Forms.RadioButton();
-            this.pbImage = new System.Windows.Forms.PictureBox();
-            this.groupBox3 = new System.Windows.Forms.GroupBox();
-            this.btnSaveHex = new System.Windows.Forms.Button();
-            this.groupBox1.SuspendLayout();
-            this.groupBox2.SuspendLayout();
-            this.gbScaling.SuspendLayout();
-            ((System.ComponentModel.ISupportInitialize)(this.pbImage)).BeginInit();
-            this.groupBox3.SuspendLayout();
-            this.SuspendLayout();
-            // 
-            // groupBox1
-            // 
-            this.groupBox1.Controls.Add(this.btnLoadImage);
-            this.groupBox1.Location = new System.Drawing.Point(20, 20);
-            this.groupBox1.Margin = new System.Windows.Forms.Padding(4, 5, 4, 5);
-            this.groupBox1.Name = "groupBox1";
-            this.groupBox1.Padding = new System.Windows.Forms.Padding(4, 5, 4, 5);
-            this.groupBox1.Size = new System.Drawing.Size(300, 217);
-            this.groupBox1.TabIndex = 0;
-            this.groupBox1.TabStop = false;
-            this.groupBox1.Text = "1. Load source Image";
-            // 
-            // btnLoadImage
-            // 
-            this.btnLoadImage.Location = new System.Drawing.Point(10, 31);
-            this.btnLoadImage.Margin = new System.Windows.Forms.Padding(4, 5, 4, 5);
-            this.btnLoadImage.Name = "btnLoadImage";
-            this.btnLoadImage.Size = new System.Drawing.Size(280, 35);
-            this.btnLoadImage.TabIndex = 0;
-            this.btnLoadImage.Text = "Load Image";
-            this.btnLoadImage.UseVisualStyleBackColor = true;
-            this.btnLoadImage.Click += new System.EventHandler(this.btnLoadImage_Click);
-            // 
-            // groupBox2
-            // 
-            this.groupBox2.Controls.Add(this.cbInvertImage);
-            this.groupBox2.Controls.Add(this.gbScaling);
-            this.groupBox2.Controls.Add(this.pbImage);
-            this.groupBox2.Location = new System.Drawing.Point(330, 20);
-            this.groupBox2.Margin = new System.Windows.Forms.Padding(4, 5, 4, 5);
-            this.groupBox2.Name = "groupBox2";
-            this.groupBox2.Padding = new System.Windows.Forms.Padding(4, 5, 4, 5);
-            this.groupBox2.Size = new System.Drawing.Size(300, 217);
-            this.groupBox2.TabIndex = 1;
-            this.groupBox2.TabStop = false;
-            this.groupBox2.Text = "2. Adjust image";
-            // 
-            // cbInvertImage
-            // 
-            this.cbInvertImage.AutoSize = true;
-            this.cbInvertImage.Location = new System.Drawing.Point(138, 122);
-            this.cbInvertImage.Margin = new System.Windows.Forms.Padding(4, 5, 4, 5);
-            this.cbInvertImage.Name = "cbInvertImage";
-            this.cbInvertImage.Size = new System.Drawing.Size(75, 24);
-            this.cbInvertImage.TabIndex = 2;
-            this.cbInvertImage.Text = "Invert";
-            this.cbInvertImage.UseVisualStyleBackColor = true;
-            this.cbInvertImage.CheckedChanged += new System.EventHandler(this.cbInvertImage_CheckedChanged);
-            // 
-            // gbScaling
-            // 
-            this.gbScaling.Controls.Add(this.rbScaleStretch);
-            this.gbScaling.Controls.Add(this.rbScaleFit);
-            this.gbScaling.Location = new System.Drawing.Point(9, 91);
-            this.gbScaling.Margin = new System.Windows.Forms.Padding(4, 5, 4, 5);
-            this.gbScaling.Name = "gbScaling";
-            this.gbScaling.Padding = new System.Windows.Forms.Padding(4, 5, 4, 5);
-            this.gbScaling.Size = new System.Drawing.Size(120, 117);
-            this.gbScaling.TabIndex = 1;
-            this.gbScaling.TabStop = false;
-            this.gbScaling.Text = "Scaling";
-            // 
-            // rbScaleStretch
-            // 
-            this.rbScaleStretch.AutoSize = true;
-            this.rbScaleStretch.Location = new System.Drawing.Point(10, 68);
-            this.rbScaleStretch.Margin = new System.Windows.Forms.Padding(4, 5, 4, 5);
-            this.rbScaleStretch.Name = "rbScaleStretch";
-            this.rbScaleStretch.Size = new System.Drawing.Size(86, 24);
-            this.rbScaleStretch.TabIndex = 1;
-            this.rbScaleStretch.Text = "Stretch";
-            this.rbScaleStretch.UseVisualStyleBackColor = true;
-            this.rbScaleStretch.CheckedChanged += new System.EventHandler(this.rbScaleStretch_CheckedChanged);
-            // 
-            // rbScaleFit
-            // 
-            this.rbScaleFit.AutoSize = true;
-            this.rbScaleFit.Checked = true;
-            this.rbScaleFit.Location = new System.Drawing.Point(10, 31);
-            this.rbScaleFit.Margin = new System.Windows.Forms.Padding(4, 5, 4, 5);
-            this.rbScaleFit.Name = "rbScaleFit";
-            this.rbScaleFit.Size = new System.Drawing.Size(52, 24);
-            this.rbScaleFit.TabIndex = 0;
-            this.rbScaleFit.TabStop = true;
-            this.rbScaleFit.Text = "Fit";
-            this.rbScaleFit.UseVisualStyleBackColor = true;
-            this.rbScaleFit.CheckedChanged += new System.EventHandler(this.rbScaleFit_CheckedChanged);
-            // 
-            // pbImage
-            // 
-            this.pbImage.BackColor = System.Drawing.Color.Black;
-            this.pbImage.Location = new System.Drawing.Point(4, 31);
-            this.pbImage.Margin = new System.Windows.Forms.Padding(4, 5, 4, 5);
-            this.pbImage.Name = "pbImage";
-            this.pbImage.Size = new System.Drawing.Size(192, 32);
-            this.pbImage.TabIndex = 0;
-            this.pbImage.TabStop = false;
-            // 
-            // groupBox3
-            // 
-            this.groupBox3.Controls.Add(this.btnSaveHex);
-            this.groupBox3.Location = new System.Drawing.Point(640, 20);
-            this.groupBox3.Margin = new System.Windows.Forms.Padding(4, 5, 4, 5);
-            this.groupBox3.Name = "groupBox3";
-            this.groupBox3.Padding = new System.Windows.Forms.Padding(4, 5, 4, 5);
-            this.groupBox3.Size = new System.Drawing.Size(300, 217);
-            this.groupBox3.TabIndex = 2;
-            this.groupBox3.TabStop = false;
-            this.groupBox3.Text = "3. Export";
-            // 
-            // btnSaveHex
-            // 
-            this.btnSaveHex.Location = new System.Drawing.Point(8, 91);
-            this.btnSaveHex.Margin = new System.Windows.Forms.Padding(4, 5, 4, 5);
-            this.btnSaveHex.Name = "btnSaveHex";
-            this.btnSaveHex.Size = new System.Drawing.Size(280, 35);
-            this.btnSaveHex.TabIndex = 0;
-            this.btnSaveHex.Text = "Save DFU File";
-            this.btnSaveHex.UseVisualStyleBackColor = true;
-            this.btnSaveHex.Click += new System.EventHandler(this.btnSaveHex_Click);
-            // 
-            // Form1
-            // 
-            this.AutoScaleDimensions = new System.Drawing.SizeF(9F, 20F);
-            this.AutoScaleMode = System.Windows.Forms.AutoScaleMode.Font;
-            this.ClientSize = new System.Drawing.Size(963, 265);
-            this.Controls.Add(this.groupBox3);
-            this.Controls.Add(this.groupBox2);
-            this.Controls.Add(this.groupBox1);
-            this.DoubleBuffered = true;
-            this.FormBorderStyle = System.Windows.Forms.FormBorderStyle.FixedDialog;
-            this.Margin = new System.Windows.Forms.Padding(4, 5, 4, 5);
-            this.Name = "Form1";
-            this.ShowIcon = false;
-            this.StartPosition = System.Windows.Forms.FormStartPosition.CenterScreen;
-            this.Text = "TS100 Custom Logo editor";
-            this.groupBox1.ResumeLayout(false);
-            this.groupBox2.ResumeLayout(false);
-            this.groupBox2.PerformLayout();
-            this.gbScaling.ResumeLayout(false);
-            this.gbScaling.PerformLayout();
-            ((System.ComponentModel.ISupportInitialize)(this.pbImage)).EndInit();
-            this.groupBox3.ResumeLayout(false);
-            this.ResumeLayout(false);
-
-        }
-
-        #endregion
-
-        private System.Windows.Forms.GroupBox groupBox1;
-        private System.Windows.Forms.Button btnLoadImage;
-        private System.Windows.Forms.GroupBox groupBox2;
-        private System.Windows.Forms.CheckBox cbInvertImage;
-        private System.Windows.Forms.GroupBox gbScaling;
-        private System.Windows.Forms.RadioButton rbScaleStretch;
-        private System.Windows.Forms.RadioButton rbScaleFit;
-        private System.Windows.Forms.PictureBox pbImage;
-        private System.Windows.Forms.GroupBox groupBox3;
-        private System.Windows.Forms.Button btnSaveHex;
-    }
-}
-

Bootup Logo/Logo GUI/TS100 Logo Editor/TS100 Logo Editor/Form1.cs

@@ -1,169 +0,0 @@
-
-using System;
-using System.Drawing;
-using System.Windows.Forms;
-
-namespace TS100_Logo_Editor
-{
-    public partial class Form1 : Form
-    {
-        public Form1()
-        {
-            InitializeComponent();
-        }
-        Image sourceImage;
-        const int LCDWidth = 96;
-        Bitmap PureBMP;
-        private void btnLoadImage_Click(object sender, EventArgs e)
-        {
-            //load in an image
-            OpenFileDialog dlg = new OpenFileDialog();
-            dlg.Title = "Select Image";
-            dlg.Filter = "Image files (*.jpg, *.jpeg, *.bmp, *.png) | *.jpg; *.jpeg; *.bmp; *.png";
-            if (dlg.ShowDialog() == DialogResult.OK)
-            {
-                //user has selected an image
-                string filename = dlg.FileName;
-                sourceImage = Image.FromFile(filename);
-                reDrawPreview();
-            }
-
-        }
-
-        private void reDrawPreview()
-        {
-            PureBMP = new Bitmap(LCDWidth, 16);
-            //scale mode
-            if (rbScaleFit.Checked)
-            {
-                //fit
-                float scalefactor = Math.Min((float)PureBMP.Width / (float)sourceImage.Width, (float)PureBMP.Height / (float)sourceImage.Height);
-                using (Graphics g = Graphics.FromImage(PureBMP))
-                {
-                    g.DrawImage(sourceImage, new RectangleF(0, 0, sourceImage.Width * scalefactor, sourceImage.Height * scalefactor));
-                }
-            }
-            else
-            {
-                //draw image stretched
-                using (Graphics g = Graphics.FromImage(PureBMP))
-                {
-                    g.DrawImage(sourceImage, new RectangleF(0, 0, LCDWidth, 16));
-                }
-            }
-            //We now have our downsampled colour image
-            //apply inversion
-            if (cbInvertImage.Checked)
-            {
-                for (int y = 0; (y <= (PureBMP.Height - 1)); y++)
-                {
-                    for (int x = 0; (x <= (PureBMP.Width - 1)); x++)
-                    {
-                        Color inv = PureBMP.GetPixel(x, y);
-                        inv = Color.FromArgb(255, (255 - inv.R), (255 - inv.G), (255 - inv.B));
-                        PureBMP.SetPixel(x, y, inv);
-                    }
-                }
-            }
-
-            //Threshold image
-            PureBMP = GrayScale(PureBMP);
-            //draw image at 2x scale
-            Bitmap bBig = new Bitmap(pbImage.Width, pbImage.Height);
-            using (Graphics g = Graphics.FromImage(bBig))
-            {
-                g.DrawImage(PureBMP, new RectangleF(0, 0, pbImage.Width, pbImage.Height));
-            }
-            pbImage.Image = bBig;
-        }
-        public Bitmap GrayScale(Bitmap Bmp)
-        {
-            int rgb;
-            Color c;
-
-            for (int y = 0; y < Bmp.Height; y++)
-                for (int x = 0; x < Bmp.Width; x++)
-                {
-                    c = Bmp.GetPixel(x, y);
-                    rgb = (int)((c.R + c.G + c.B) / 3);
-                    if (rgb > 128)
-                        rgb = 0xFF;
-                    else
-                        rgb = 0x00;
-                    Bmp.SetPixel(x, y, Color.FromArgb(rgb, rgb, rgb));
-                }
-            return Bmp;
-        }
-
-        private void rbScaleStretch_CheckedChanged(object sender, EventArgs e)
-        {
-            reDrawPreview();
-        }
-
-        private void rbScaleFit_CheckedChanged(object sender, EventArgs e)
-        {
-            reDrawPreview();
-        }
-
-        private void cbInvertImage_CheckedChanged(object sender, EventArgs e)
-        {
-            reDrawPreview();
-        }
-
-        private void btnSaveHex_Click(object sender, EventArgs e)
-        {
-            Bitmap bmp = PureBMP;
-            //convert image to byte array
-            byte[] data = new byte[1024];
-            data[0] = 0xAA;
-            data[1] = 0x55;
-            data[2] = 0xF0;
-            data[3] = 0x0D;
-
-            for (int i = 0; i < (LCDWidth * 16 / 8); i++)
-            {
-                //loop through all the bytes
-                byte b = 0;//local byte
-                //i sets the starting column
-                for (int y = 0; y < 8; y++)
-                {
-                    var px = bmp.GetPixel(i % LCDWidth, (i / LCDWidth) == 1 ? 8 + y : y);
-                    //we loop down the picture
-                    //LSB is the top, MSB is the bottom
-                    if (px.R >= 128)
-                    {
-                        //pixel is white
-                        b |= (byte)(1 << y);
-                    }
-                }
-                data[i + 4] = b;
-            }
-            //We should now have the byte array that represents the image in the LCD format.
-            //We now send this off to be encoded by the Intel Encoder
-            //Flip all uint16_t pairs
-            for (int i = 0; i < data.Length; i += 2)
-            {
-                //we need to swap each pair
-                byte temp = data[i];
-                data[i] = data[i + 1];
-                data[i + 1] = temp;
-            }
-            string outputHexFile = IntelHex.IntelHex.encode(data, 0x0800F800, 16, true, true);//16 bytes is the only format the DFU seems to support //0x0800F800
-            //^ This string now just needs to be written out to a text file :)
-            SaveFileDialog dlg = new SaveFileDialog();
-            dlg.Title = "Save DFU File";
-            dlg.AddExtension = true;
-            dlg.DefaultExt = ".hex";
-            dlg.Filter = "Hex Files(*.hex)|*.hex";
-            if (dlg.ShowDialog() == DialogResult.OK)
-            {
-                //The user has selected where they want to save the file
-                using (var fs = new System.IO.StreamWriter(dlg.FileName))
-                {
-                    fs.Write(outputHexFile);
-                }
-            }
-
-        }
-    }
-}

Bootup Logo/Logo GUI/TS100 Logo Editor/TS100 Logo Editor/Form1.resx

@@ -1,120 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<root>
-  <!-- 
-    Microsoft ResX Schema 
-    
-    Version 2.0
-    
-    The primary goals of this format is to allow a simple XML format 
-    that is mostly human readable. The generation and parsing of the 
-    various data types are done through the TypeConverter classes 
-    associated with the data types.
-    
-    Example:
-    
-    ... ado.net/XML headers & schema ...
-    <resheader name="resmimetype">text/microsoft-resx</resheader>
-    <resheader name="version">2.0</resheader>
-    <resheader name="reader">System.Resources.ResXResourceReader, System.Windows.Forms, ...</resheader>
-    <resheader name="writer">System.Resources.ResXResourceWriter, System.Windows.Forms, ...</resheader>
-    <data name="Name1"><value>this is my long string</value><comment>this is a comment</comment></data>
-    <data name="Color1" type="System.Drawing.Color, System.Drawing">Blue</data>
-    <data name="Bitmap1" mimetype="application/x-microsoft.net.object.binary.base64">
-        <value>[base64 mime encoded serialized .NET Framework object]</value>
-    </data>
-    <data name="Icon1" type="System.Drawing.Icon, System.Drawing" mimetype="application/x-microsoft.net.object.bytearray.base64">
-        <value>[base64 mime encoded string representing a byte array form of the .NET Framework object]</value>
-        <comment>This is a comment</comment>
-    </data>
-                
-    There are any number of "resheader" rows that contain simple 
-    name/value pairs.
-    
-    Each data row contains a name, and value. The row also contains a 
-    type or mimetype. Type corresponds to a .NET class that support 
-    text/value conversion through the TypeConverter architecture. 
-    Classes that don't support this are serialized and stored with the 
-    mimetype set.
-    
-    The mimetype is used for serialized objects, and tells the 
-    ResXResourceReader how to depersist the object. This is currently not 
-    extensible. For a given mimetype the value must be set accordingly:
-    
-    Note - application/x-microsoft.net.object.binary.base64 is the format 
-    that the ResXResourceWriter will generate, however the reader can 
-    read any of the formats listed below.
-    
-    mimetype: application/x-microsoft.net.object.binary.base64
-    value   : The object must be serialized with 
-            : System.Runtime.Serialization.Formatters.Binary.BinaryFormatter
-            : and then encoded with base64 encoding.
-    
-    mimetype: application/x-microsoft.net.object.soap.base64
-    value   : The object must be serialized with 
-            : System.Runtime.Serialization.Formatters.Soap.SoapFormatter
-            : and then encoded with base64 encoding.
-
-    mimetype: application/x-microsoft.net.object.bytearray.base64
-    value   : The object must be serialized into a byte array 
-            : using a System.ComponentModel.TypeConverter
-            : and then encoded with base64 encoding.
-    -->
-  <xsd:schema id="root" xmlns="" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata">
-    <xsd:import namespace="http://www.w3.org/XML/1998/namespace" />
-    <xsd:element name="root" msdata:IsDataSet="true">
-      <xsd:complexType>
-        <xsd:choice maxOccurs="unbounded">
-          <xsd:element name="metadata">
-            <xsd:complexType>
-              <xsd:sequence>
-                <xsd:element name="value" type="xsd:string" minOccurs="0" />
-              </xsd:sequence>
-              <xsd:attribute name="name" use="required" type="xsd:string" />
-              <xsd:attribute name="type" type="xsd:string" />
-              <xsd:attribute name="mimetype" type="xsd:string" />
-              <xsd:attribute ref="xml:space" />
-            </xsd:complexType>
-          </xsd:element>
-          <xsd:element name="assembly">
-            <xsd:complexType>
-              <xsd:attribute name="alias" type="xsd:string" />
-              <xsd:attribute name="name" type="xsd:string" />
-            </xsd:complexType>
-          </xsd:element>
-          <xsd:element name="data">
-            <xsd:complexType>
-              <xsd:sequence>
-                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
-                <xsd:element name="comment" type="xsd:string" minOccurs="0" msdata:Ordinal="2" />
-              </xsd:sequence>
-              <xsd:attribute name="name" type="xsd:string" use="required" msdata:Ordinal="1" />
-              <xsd:attribute name="type" type="xsd:string" msdata:Ordinal="3" />
-              <xsd:attribute name="mimetype" type="xsd:string" msdata:Ordinal="4" />
-              <xsd:attribute ref="xml:space" />
-            </xsd:complexType>
-          </xsd:element>
-          <xsd:element name="resheader">
-            <xsd:complexType>
-              <xsd:sequence>
-                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
-              </xsd:sequence>
-              <xsd:attribute name="name" type="xsd:string" use="required" />
-            </xsd:complexType>
-          </xsd:element>
-        </xsd:choice>
-      </xsd:complexType>
-    </xsd:element>
-  </xsd:schema>
-  <resheader name="resmimetype">
-    <value>text/microsoft-resx</value>
-  </resheader>
-  <resheader name="version">
-    <value>2.0</value>
-  </resheader>
-  <resheader name="reader">
-    <value>System.Resources.ResXResourceReader, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
-  </resheader>
-  <resheader name="writer">
-    <value>System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
-  </resheader>
-</root>

Bootup Logo/Logo GUI/TS100 Logo Editor/TS100 Logo Editor/IntelHex.cs

@@ -1,96 +0,0 @@
-using System;
-using System.Collections.Generic;
-using System.ComponentModel;
-using System.Data;
-
-namespace IntelHex
-{
-    public class IntelHex
-    {
-        public static string encode(byte[] data, UInt32 startingAddress, int bytesPerLine, bool header = true,bool Addbloat=false)
-        {
-            //We are taking the byte array and encoding it into the wanted hex file contents (aka string of data).
-            //First create the starting base address record
-            //:020000040800F2
-            string Output = "";
-            if (header)
-            {
-                //Set the upper 16 bits of the address space
-                Output += getHighAddressSetLine((UInt16)(startingAddress >> 16));
-            }
-
-            //Now loop through all the data that we were given
-            for (UInt32 index = 0; index < data.Length; index = (UInt32)(index + bytesPerLine))
-            {
-                //We want to read from data[index] to data[index+bytesPerLine-1]
-                UInt32 currentAddress = (UInt32)(startingAddress + index);
-                if ((currentAddress >> 16) != (startingAddress >> 16))
-                {
-                    Output += getHighAddressSetLine((UInt16)(currentAddress >> 16));
-                    //The address has rolled over the 64K boundry, so write a new high address change line
-                }
-                //We should now be good for the higher part of the address
-                Output += encodeDataLine((UInt16)(currentAddress & 0xFFFF), data, index, bytesPerLine);
-            }
-            if(Addbloat)
-            {
-                //Repeat the instructs a stack of times to get around filesize minimums
-                for(int x=0;x<3;x++)
-                {
-                    for (UInt32 index = 0; index < data.Length; index = (UInt32)(index + bytesPerLine))
-                    {
-                        //We want to read from data[index] to data[index+bytesPerLine-1]
-                        UInt32 currentAddress = (UInt32)(startingAddress + index);
-                        if ((currentAddress >> 16) != (startingAddress >> 16))
-                        {
-                            Output += getHighAddressSetLine((UInt16)(currentAddress >> 16));
-                            //The address has rolled over the 64K boundry, so write a new high address change line
-                        }
-                        //We should now be good for the higher part of the address
-                        Output += encodeDataLine((UInt16)(currentAddress & 0xFFFF), data, index, bytesPerLine);
-                    }
-                }
-            }
-            //We have now written out all the data lines
-            Output += ":00000001FF\r\n";//End of file marker
-
-            return Output;
-        }
-        private static string encodeDataLine(UInt16 address, byte[] data, UInt32 startindex, int bytes)
-        {
-            string line = ":";
-            line += bytes.ToString("X2");//add the marker of line length
-            line += address.ToString("X4");//write the address
-            line += "00";//Data line
-            //Next copy bytes bytes 
-            for (int i = 0; i < bytes; i++)
-            {
-                if ((startindex + i) < data.Length)
-                    line += data[startindex + i].ToString("X2");
-                else
-                    line += "FF";//pad images out with FF
-            }
-            line += checksumLine(line);//Adds checksum and EOL
-            return line;
-        }
-        private static string getHighAddressSetLine(UInt16 HighAddress)
-        {
-            string Output = "";
-            Output += ":02000004" + (HighAddress).ToString("X4");
-            Output += checksumLine(Output);
-            return Output;
-        }
-        private static string checksumLine(string line)
-        {
-            //We want to convert the string line to each byte and sum. 
-            byte sum = 0;
-            for (int i = 1; i < line.Length; i += 2)
-            {
-                byte b = byte.Parse((line.Substring(i, 2)), System.Globalization.NumberStyles.HexNumber);
-                sum += b;
-            }
-            byte checksum = (byte)(((byte)0) - sum);//invert
-            return checksum.ToString("X2") + "\r\n";
-        }
-    }
-}

Bootup Logo/Logo GUI/TS100 Logo Editor/TS100 Logo Editor/Program.cs

@@ -1,22 +0,0 @@
-using System;
-using System.Collections.Generic;
-using System.Linq;
-using System.Threading.Tasks;
-using System.Windows.Forms;
-
-namespace TS100_Logo_Editor
-{
-    static class Program
-    {
-        /// <summary>
-        /// The main entry point for the application.
-        /// </summary>
-        [STAThread]
-        static void Main()
-        {
-            Application.EnableVisualStyles();
-            Application.SetCompatibleTextRenderingDefault(false);
-            Application.Run(new Form1());
-        }
-    }
-}

Bootup Logo/Logo GUI/TS100 Logo Editor/TS100 Logo Editor/Properties/AssemblyInfo.cs

@@ -1,36 +0,0 @@
-using System.Reflection;
-using System.Runtime.CompilerServices;
-using System.Runtime.InteropServices;
-
-// General Information about an assembly is controlled through the following
-// set of attributes. Change these attribute values to modify the information
-// associated with an assembly.
-[assembly: AssemblyTitle("TS100 Logo Editor")]
-[assembly: AssemblyDescription("")]
-[assembly: AssemblyConfiguration("")]
-[assembly: AssemblyCompany("")]
-[assembly: AssemblyProduct("TS100 Logo Editor")]
-[assembly: AssemblyCopyright("Copyright ©  2017")]
-[assembly: AssemblyTrademark("")]
-[assembly: AssemblyCulture("")]
-
-// Setting ComVisible to false makes the types in this assembly not visible
-// to COM components.  If you need to access a type in this assembly from
-// COM, set the ComVisible attribute to true on that type.
-[assembly: ComVisible(false)]
-
-// The following GUID is for the ID of the typelib if this project is exposed to COM
-[assembly: Guid("206c8aef-3be6-44e9-a1b0-25bf3805f1cb")]
-
-// Version information for an assembly consists of the following four values:
-//
-//      Major Version
-//      Minor Version
-//      Build Number
-//      Revision
-//
-// You can specify all the values or you can default the Build and Revision Numbers
-// by using the '*' as shown below:
-// [assembly: AssemblyVersion("1.0.*")]
-[assembly: AssemblyVersion("1.0.0.0")]
-[assembly: AssemblyFileVersion("1.0.0.0")]

Bootup Logo/Logo GUI/TS100 Logo Editor/TS100 Logo Editor/Properties/Resources.Designer.cs

@@ -1,63 +0,0 @@
-//------------------------------------------------------------------------------
-// <auto-generated>
-//     This code was generated by a tool.
-//     Runtime Version:4.0.30319.42000
-//
-//     Changes to this file may cause incorrect behavior and will be lost if
-//     the code is regenerated.
-// </auto-generated>
-//------------------------------------------------------------------------------
-
-namespace TS100_Logo_Editor.Properties {
-    using System;
-    
-    
-    /// <summary>
-    ///   A strongly-typed resource class, for looking up localized strings, etc.
-    /// </summary>
-    // This class was auto-generated by the StronglyTypedResourceBuilder
-    // class via a tool like ResGen or Visual Studio.
-    // To add or remove a member, edit your .ResX file then rerun ResGen
-    // with the /str option, or rebuild your VS project.
-    [global::System.CodeDom.Compiler.GeneratedCodeAttribute("System.Resources.Tools.StronglyTypedResourceBuilder", "4.0.0.0")]
-    [global::System.Diagnostics.DebuggerNonUserCodeAttribute()]
-    [global::System.Runtime.CompilerServices.CompilerGeneratedAttribute()]
-    internal class Resources {
-        
-        private static global::System.Resources.ResourceManager resourceMan;
-        
-        private static global::System.Globalization.CultureInfo resourceCulture;
-        
-        [global::System.Diagnostics.CodeAnalysis.SuppressMessageAttribute("Microsoft.Performance", "CA1811:AvoidUncalledPrivateCode")]
-        internal Resources() {
-        }
-        
-        /// <summary>
-        ///   Returns the cached ResourceManager instance used by this class.
-        /// </summary>
-        [global::System.ComponentModel.EditorBrowsableAttribute(global::System.ComponentModel.EditorBrowsableState.Advanced)]
-        internal static global::System.Resources.ResourceManager ResourceManager {
-            get {
-                if (object.ReferenceEquals(resourceMan, null)) {
-                    global::System.Resources.ResourceManager temp = new global::System.Resources.ResourceManager("TS100_Logo_Editor.Properties.Resources", typeof(Resources).Assembly);
-                    resourceMan = temp;
-                }
-                return resourceMan;
-            }
-        }
-        
-        /// <summary>
-        ///   Overrides the current thread's CurrentUICulture property for all
-        ///   resource lookups using this strongly typed resource class.
-        /// </summary>
-        [global::System.ComponentModel.EditorBrowsableAttribute(global::System.ComponentModel.EditorBrowsableState.Advanced)]
-        internal static global::System.Globalization.CultureInfo Culture {
-            get {
-                return resourceCulture;
-            }
-            set {
-                resourceCulture = value;
-            }
-        }
-    }
-}

Bootup Logo/Logo GUI/TS100 Logo Editor/TS100 Logo Editor/Properties/Resources.resx

@@ -1,117 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<root>
-  <!-- 
-    Microsoft ResX Schema 
-    
-    Version 2.0
-    
-    The primary goals of this format is to allow a simple XML format 
-    that is mostly human readable. The generation and parsing of the 
-    various data types are done through the TypeConverter classes 
-    associated with the data types.
-    
-    Example:
-    
-    ... ado.net/XML headers & schema ...
-    <resheader name="resmimetype">text/microsoft-resx</resheader>
-    <resheader name="version">2.0</resheader>
-    <resheader name="reader">System.Resources.ResXResourceReader, System.Windows.Forms, ...</resheader>
-    <resheader name="writer">System.Resources.ResXResourceWriter, System.Windows.Forms, ...</resheader>
-    <data name="Name1"><value>this is my long string</value><comment>this is a comment</comment></data>
-    <data name="Color1" type="System.Drawing.Color, System.Drawing">Blue</data>
-    <data name="Bitmap1" mimetype="application/x-microsoft.net.object.binary.base64">
-        <value>[base64 mime encoded serialized .NET Framework object]</value>
-    </data>
-    <data name="Icon1" type="System.Drawing.Icon, System.Drawing" mimetype="application/x-microsoft.net.object.bytearray.base64">
-        <value>[base64 mime encoded string representing a byte array form of the .NET Framework object]</value>
-        <comment>This is a comment</comment>
-    </data>
-                
-    There are any number of "resheader" rows that contain simple 
-    name/value pairs.
-    
-    Each data row contains a name, and value. The row also contains a 
-    type or mimetype. Type corresponds to a .NET class that support 
-    text/value conversion through the TypeConverter architecture. 
-    Classes that don't support this are serialized and stored with the 
-    mimetype set.
-    
-    The mimetype is used for serialized objects, and tells the 
-    ResXResourceReader how to depersist the object. This is currently not 
-    extensible. For a given mimetype the value must be set accordingly:
-    
-    Note - application/x-microsoft.net.object.binary.base64 is the format 
-    that the ResXResourceWriter will generate, however the reader can 
-    read any of the formats listed below.
-    
-    mimetype: application/x-microsoft.net.object.binary.base64
-    value   : The object must be serialized with 
-            : System.Serialization.Formatters.Binary.BinaryFormatter
-            : and then encoded with base64 encoding.
-    
-    mimetype: application/x-microsoft.net.object.soap.base64
-    value   : The object must be serialized with 
-            : System.Runtime.Serialization.Formatters.Soap.SoapFormatter
-            : and then encoded with base64 encoding.
-
-    mimetype: application/x-microsoft.net.object.bytearray.base64
-    value   : The object must be serialized into a byte array 
-            : using a System.ComponentModel.TypeConverter
-            : and then encoded with base64 encoding.
-    -->
-  <xsd:schema id="root" xmlns="" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata">
-    <xsd:element name="root" msdata:IsDataSet="true">
-      <xsd:complexType>
-        <xsd:choice maxOccurs="unbounded">
-          <xsd:element name="metadata">
-            <xsd:complexType>
-              <xsd:sequence>
-                <xsd:element name="value" type="xsd:string" minOccurs="0" />
-              </xsd:sequence>
-              <xsd:attribute name="name" type="xsd:string" />
-              <xsd:attribute name="type" type="xsd:string" />
-              <xsd:attribute name="mimetype" type="xsd:string" />
-            </xsd:complexType>
-          </xsd:element>
-          <xsd:element name="assembly">
-            <xsd:complexType>
-              <xsd:attribute name="alias" type="xsd:string" />
-              <xsd:attribute name="name" type="xsd:string" />
-            </xsd:complexType>
-          </xsd:element>
-          <xsd:element name="data">
-            <xsd:complexType>
-              <xsd:sequence>
-                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
-                <xsd:element name="comment" type="xsd:string" minOccurs="0" msdata:Ordinal="2" />
-              </xsd:sequence>
-              <xsd:attribute name="name" type="xsd:string" msdata:Ordinal="1" />
-              <xsd:attribute name="type" type="xsd:string" msdata:Ordinal="3" />
-              <xsd:attribute name="mimetype" type="xsd:string" msdata:Ordinal="4" />
-            </xsd:complexType>
-          </xsd:element>
-          <xsd:element name="resheader">
-            <xsd:complexType>
-              <xsd:sequence>
-                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
-              </xsd:sequence>
-              <xsd:attribute name="name" type="xsd:string" use="required" />
-            </xsd:complexType>
-          </xsd:element>
-        </xsd:choice>
-      </xsd:complexType>
-    </xsd:element>
-  </xsd:schema>
-  <resheader name="resmimetype">
-    <value>text/microsoft-resx</value>
-  </resheader>
-  <resheader name="version">
-    <value>2.0</value>
-  </resheader>
-  <resheader name="reader">
-    <value>System.Resources.ResXResourceReader, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
-  </resheader>
-  <resheader name="writer">
-    <value>System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
-  </resheader>
-</root>

Bootup Logo/Logo GUI/TS100 Logo Editor/TS100 Logo Editor/Properties/Settings.Designer.cs

@@ -1,26 +0,0 @@
-//------------------------------------------------------------------------------
-// <auto-generated>
-//     This code was generated by a tool.
-//     Runtime Version:4.0.30319.42000
-//
-//     Changes to this file may cause incorrect behavior and will be lost if
-//     the code is regenerated.
-// </auto-generated>
-//------------------------------------------------------------------------------
-
-namespace TS100_Logo_Editor.Properties {
-    
-    
-    [global::System.Runtime.CompilerServices.CompilerGeneratedAttribute()]
-    [global::System.CodeDom.Compiler.GeneratedCodeAttribute("Microsoft.VisualStudio.Editors.SettingsDesigner.SettingsSingleFileGenerator", "15.1.0.0")]
-    internal sealed partial class Settings : global::System.Configuration.ApplicationSettingsBase {
-        
-        private static Settings defaultInstance = ((Settings)(global::System.Configuration.ApplicationSettingsBase.Synchronized(new Settings())));
-        
-        public static Settings Default {
-            get {
-                return defaultInstance;
-            }
-        }
-    }
-}

Bootup Logo/Logo GUI/TS100 Logo Editor/TS100 Logo Editor/Properties/Settings.settings

@@ -1,7 +0,0 @@
-<?xml version='1.0' encoding='utf-8'?>
-<SettingsFile xmlns="http://schemas.microsoft.com/VisualStudio/2004/01/settings" CurrentProfile="(Default)">
-  <Profiles>
-    <Profile Name="(Default)" />
-  </Profiles>
-  <Settings />
-</SettingsFile>

Bootup Logo/Logo GUI/TS100 Logo Editor/TS100 Logo Editor/TS100 Logo Editor.csproj

@@ -1,87 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<Project ToolsVersion="15.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
-  <Import Project="$(MSBuildExtensionsPath)\$(MSBuildToolsVersion)\Microsoft.Common.props" Condition="Exists('$(MSBuildExtensionsPath)\$(MSBuildToolsVersion)\Microsoft.Common.props')" />
-  <PropertyGroup>
-    <Configuration Condition=" '$(Configuration)' == '' ">Debug</Configuration>
-    <Platform Condition=" '$(Platform)' == '' ">AnyCPU</Platform>
-    <ProjectGuid>{206C8AEF-3BE6-44E9-A1B0-25BF3805F1CB}</ProjectGuid>
-    <OutputType>WinExe</OutputType>
-    <RootNamespace>TS100_Logo_Editor</RootNamespace>
-    <AssemblyName>TS100 Logo Editor</AssemblyName>
-    <TargetFrameworkVersion>v4.0</TargetFrameworkVersion>
-    <FileAlignment>512</FileAlignment>
-    <TargetFrameworkProfile />
-  </PropertyGroup>
-  <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Debug|AnyCPU' ">
-    <PlatformTarget>AnyCPU</PlatformTarget>
-    <DebugSymbols>true</DebugSymbols>
-    <DebugType>full</DebugType>
-    <Optimize>false</Optimize>
-    <OutputPath>bin\Debug\</OutputPath>
-    <DefineConstants>DEBUG;TRACE</DefineConstants>
-    <ErrorReport>prompt</ErrorReport>
-    <WarningLevel>4</WarningLevel>
-  </PropertyGroup>
-  <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Release|AnyCPU' ">
-    <PlatformTarget>AnyCPU</PlatformTarget>
-    <DebugType>pdbonly</DebugType>
-    <Optimize>true</Optimize>
-    <OutputPath>bin\Release\</OutputPath>
-    <DefineConstants>
-    </DefineConstants>
-    <ErrorReport>prompt</ErrorReport>
-    <WarningLevel>4</WarningLevel>
-  </PropertyGroup>
-  <PropertyGroup>
-    <StartupObject>TS100_Logo_Editor.Program</StartupObject>
-  </PropertyGroup>
-  <ItemGroup>
-    <Reference Include="System" />
-    <Reference Include="System.Core" />
-    <Reference Include="System.Xml.Linq" />
-    <Reference Include="System.Data.DataSetExtensions" />
-    <Reference Include="Microsoft.CSharp" />
-    <Reference Include="System.Data" />
-    <Reference Include="System.Deployment" />
-    <Reference Include="System.Drawing" />
-    <Reference Include="System.Windows.Forms" />
-    <Reference Include="System.Xml" />
-  </ItemGroup>
-  <ItemGroup>
-    <Compile Include="Form1.cs">
-      <SubType>Form</SubType>
-    </Compile>
-    <Compile Include="Form1.Designer.cs">
-      <DependentUpon>Form1.cs</DependentUpon>
-    </Compile>
-    <Compile Include="IntelHex.cs" />
-    <Compile Include="Program.cs" />
-    <Compile Include="Properties\AssemblyInfo.cs" />
-    <EmbeddedResource Include="Form1.resx">
-      <DependentUpon>Form1.cs</DependentUpon>
-    </EmbeddedResource>
-    <EmbeddedResource Include="Properties\Resources.resx">
-      <Generator>ResXFileCodeGenerator</Generator>
-      <LastGenOutput>Resources.Designer.cs</LastGenOutput>
-      <SubType>Designer</SubType>
-    </EmbeddedResource>
-    <Compile Include="Properties\Resources.Designer.cs">
-      <AutoGen>True</AutoGen>
-      <DependentUpon>Resources.resx</DependentUpon>
-      <DesignTime>True</DesignTime>
-    </Compile>
-    <None Include="Properties\Settings.settings">
-      <Generator>SettingsSingleFileGenerator</Generator>
-      <LastGenOutput>Settings.Designer.cs</LastGenOutput>
-    </None>
-    <Compile Include="Properties\Settings.Designer.cs">
-      <AutoGen>True</AutoGen>
-      <DependentUpon>Settings.settings</DependentUpon>
-      <DesignTimeSharedInput>True</DesignTimeSharedInput>
-    </Compile>
-  </ItemGroup>
-  <ItemGroup>
-    <None Include="App.config" />
-  </ItemGroup>
-  <Import Project="$(MSBuildToolsPath)\Microsoft.CSharp.targets" />
-</Project>

Bootup Logo/Logo GUI/TS100 Logo Editor/TS100 Logo Editor/obj/Debug/CoreCompileInputs.cache

@@ -1 +0,0 @@
-1f6b9b8bf2c9e759acd19ce919cfeae19b243aa0

Bootup Logo/Logos/001_TS100.hex

@@ -1,258 +0,0 @@
-:020000040800F2
-:10F8000055AA0DF080002A54821580818080808066
-:10F8100080808080808080808080808000000000E8
-:10F82000000000004080402020C020201010080868
-:10F8300008080C080C0C0C0C080808080C0C0C0C24
-:10F84000E80CA8A8A828E8A8C808A828A8A848A834
-:10F850008808284808E828C828A80CCC28CC28A85C
-:10F8600008C800F80200050208050808080808088A
-:10F8700008080A080A090A090A0908090505050508
-:10F880000505050510081020201F4040404020407D
-:10F890002020202020202020202020202020202068
-:10F8A00020202F202F28202025202A2A2A2A2728F6
-:10F8B0002120282F202F2827282B20272827282BD6
-:10F8C0002027001F000000000000000000000000D2
-:10F8D0000000000000000000000000000000000028
-:10F8E0000000000000000000000000000000000018
-:10F8F0000000000000000000000000000000000008
-:10F9000000000000000000000000000000000000F7
-:10F9100000000000000000000000000000000000E7
-:10F9200000000000000000000000000000000000D7
-:10F9300000000000000000000000000000000000C7
-:10F9400000000000000000000000000000000000B7
-:10F9500000000000000000000000000000000000A7
-:10F960000000000000000000000000000000000097
-:10F970000000000000000000000000000000000087
-:10F980000000000000000000000000000000000077
-:10F990000000000000000000000000000000000067
-:10F9A0000000000000000000000000000000000057
-:10F9B0000000000000000000000000000000000047
-:10F9C0000000000000000000000000000000000037
-:10F9D0000000000000000000000000000000000027
-:10F9E0000000000000000000000000000000000017
-:10F9F0000000000000000000000000000000000007
-:10FA000000000000000000000000000000000000F6
-:10FA100000000000000000000000000000000000E6
-:10FA200000000000000000000000000000000000D6
-:10FA300000000000000000000000000000000000C6
-:10FA400000000000000000000000000000000000B6
-:10FA500000000000000000000000000000000000A6
-:10FA60000000000000000000000000000000000096
-:10FA70000000000000000000000000000000000086
-:10FA80000000000000000000000000000000000076
-:10FA90000000000000000000000000000000000066
-:10FAA0000000000000000000000000000000000056
-:10FAB0000000000000000000000000000000000046
-:10FAC0000000000000000000000000000000000036
-:10FAD0000000000000000000000000000000000026
-:10FAE0000000000000000000000000000000000016
-:10FAF0000000000000000000000000000000000006
-:10FB000000000000000000000000000000000000F5
-:10FB100000000000000000000000000000000000E5
-:10FB200000000000000000000000000000000000D5
-:10FB300000000000000000000000000000000000C5
-:10FB400000000000000000000000000000000000B5
-:10FB500000000000000000000000000000000000A5
-:10FB60000000000000000000000000000000000095
-:10FB70000000000000000000000000000000000085
-:10FB80000000000000000000000000000000000075
-:10FB90000000000000000000000000000000000065
-:10FBA0000000000000000000000000000000000055
-:10FBB0000000000000000000000000000000000045
-:10FBC0000000000000000000000000000000000035
-:10FBD0000000000000000000000000000000000025
-:10FBE0000000000000000000000000000000000015
-:10FBF0000000000000000000000000000000000005
-:10F8000055AA0DF080002A54821580818080808066
-:10F8100080808080808080808080808000000000E8
-:10F82000000000004080402020C020201010080868
-:10F8300008080C080C0C0C0C080808080C0C0C0C24
-:10F84000E80CA8A8A828E8A8C808A828A8A848A834
-:10F850008808284808E828C828A80CCC28CC28A85C
-:10F8600008C800F80200050208050808080808088A
-:10F8700008080A080A090A090A0908090505050508
-:10F880000505050510081020201F4040404020407D
-:10F890002020202020202020202020202020202068
-:10F8A00020202F202F28202025202A2A2A2A2728F6
-:10F8B0002120282F202F2827282B20272827282BD6
-:10F8C0002027001F000000000000000000000000D2
-:10F8D0000000000000000000000000000000000028
-:10F8E0000000000000000000000000000000000018
-:10F8F0000000000000000000000000000000000008
-:10F9000000000000000000000000000000000000F7
-:10F9100000000000000000000000000000000000E7
-:10F9200000000000000000000000000000000000D7
-:10F9300000000000000000000000000000000000C7
-:10F9400000000000000000000000000000000000B7
-:10F9500000000000000000000000000000000000A7
-:10F960000000000000000000000000000000000097
-:10F970000000000000000000000000000000000087
-:10F980000000000000000000000000000000000077
-:10F990000000000000000000000000000000000067
-:10F9A0000000000000000000000000000000000057
-:10F9B0000000000000000000000000000000000047
-:10F9C0000000000000000000000000000000000037
-:10F9D0000000000000000000000000000000000027
-:10F9E0000000000000000000000000000000000017
-:10F9F0000000000000000000000000000000000007
-:10FA000000000000000000000000000000000000F6
-:10FA100000000000000000000000000000000000E6
-:10FA200000000000000000000000000000000000D6
-:10FA300000000000000000000000000000000000C6
-:10FA400000000000000000000000000000000000B6
-:10FA500000000000000000000000000000000000A6
-:10FA60000000000000000000000000000000000096
-:10FA70000000000000000000000000000000000086
-:10FA80000000000000000000000000000000000076
-:10FA90000000000000000000000000000000000066
-:10FAA0000000000000000000000000000000000056
-:10FAB0000000000000000000000000000000000046
-:10FAC0000000000000000000000000000000000036
-:10FAD0000000000000000000000000000000000026
-:10FAE0000000000000000000000000000000000016
-:10FAF0000000000000000000000000000000000006
-:10FB000000000000000000000000000000000000F5
-:10FB100000000000000000000000000000000000E5
-:10FB200000000000000000000000000000000000D5
-:10FB300000000000000000000000000000000000C5
-:10FB400000000000000000000000000000000000B5
-:10FB500000000000000000000000000000000000A5
-:10FB60000000000000000000000000000000000095
-:10FB70000000000000000000000000000000000085
-:10FB80000000000000000000000000000000000075
-:10FB90000000000000000000000000000000000065
-:10FBA0000000000000000000000000000000000055
-:10FBB0000000000000000000000000000000000045
-:10FBC0000000000000000000000000000000000035
-:10FBD0000000000000000000000000000000000025
-:10FBE0000000000000000000000000000000000015
-:10FBF0000000000000000000000000000000000005
-:10F8000055AA0DF080002A54821580818080808066
-:10F8100080808080808080808080808000000000E8
-:10F82000000000004080402020C020201010080868
-:10F8300008080C080C0C0C0C080808080C0C0C0C24
-:10F84000E80CA8A8A828E8A8C808A828A8A848A834
-:10F850008808284808E828C828A80CCC28CC28A85C
-:10F8600008C800F80200050208050808080808088A
-:10F8700008080A080A090A090A0908090505050508
-:10F880000505050510081020201F4040404020407D
-:10F890002020202020202020202020202020202068
-:10F8A00020202F202F28202025202A2A2A2A2728F6
-:10F8B0002120282F202F2827282B20272827282BD6
-:10F8C0002027001F000000000000000000000000D2
-:10F8D0000000000000000000000000000000000028
-:10F8E0000000000000000000000000000000000018
-:10F8F0000000000000000000000000000000000008
-:10F9000000000000000000000000000000000000F7
-:10F9100000000000000000000000000000000000E7
-:10F9200000000000000000000000000000000000D7
-:10F9300000000000000000000000000000000000C7
-:10F9400000000000000000000000000000000000B7
-:10F9500000000000000000000000000000000000A7
-:10F960000000000000000000000000000000000097
-:10F970000000000000000000000000000000000087
-:10F980000000000000000000000000000000000077
-:10F990000000000000000000000000000000000067
-:10F9A0000000000000000000000000000000000057
-:10F9B0000000000000000000000000000000000047
-:10F9C0000000000000000000000000000000000037
-:10F9D0000000000000000000000000000000000027
-:10F9E0000000000000000000000000000000000017
-:10F9F0000000000000000000000000000000000007
-:10FA000000000000000000000000000000000000F6
-:10FA100000000000000000000000000000000000E6
-:10FA200000000000000000000000000000000000D6
-:10FA300000000000000000000000000000000000C6
-:10FA400000000000000000000000000000000000B6
-:10FA500000000000000000000000000000000000A6
-:10FA60000000000000000000000000000000000096
-:10FA70000000000000000000000000000000000086
-:10FA80000000000000000000000000000000000076
-:10FA90000000000000000000000000000000000066
-:10FAA0000000000000000000000000000000000056
-:10FAB0000000000000000000000000000000000046
-:10FAC0000000000000000000000000000000000036
-:10FAD0000000000000000000000000000000000026
-:10FAE0000000000000000000000000000000000016
-:10FAF0000000000000000000000000000000000006
-:10FB000000000000000000000000000000000000F5
-:10FB100000000000000000000000000000000000E5
-:10FB200000000000000000000000000000000000D5
-:10FB300000000000000000000000000000000000C5
-:10FB400000000000000000000000000000000000B5
-:10FB500000000000000000000000000000000000A5
-:10FB60000000000000000000000000000000000095
-:10FB70000000000000000000000000000000000085
-:10FB80000000000000000000000000000000000075
-:10FB90000000000000000000000000000000000065
-:10FBA0000000000000000000000000000000000055
-:10FBB0000000000000000000000000000000000045
-:10FBC0000000000000000000000000000000000035
-:10FBD0000000000000000000000000000000000025
-:10FBE0000000000000000000000000000000000015
-:10FBF0000000000000000000000000000000000005
-:10F8000055AA0DF080002A54821580818080808066
-:10F8100080808080808080808080808000000000E8
-:10F82000000000004080402020C020201010080868
-:10F8300008080C080C0C0C0C080808080C0C0C0C24
-:10F84000E80CA8A8A828E8A8C808A828A8A848A834
-:10F850008808284808E828C828A80CCC28CC28A85C
-:10F8600008C800F80200050208050808080808088A
-:10F8700008080A080A090A090A0908090505050508
-:10F880000505050510081020201F4040404020407D
-:10F890002020202020202020202020202020202068
-:10F8A00020202F202F28202025202A2A2A2A2728F6
-:10F8B0002120282F202F2827282B20272827282BD6
-:10F8C0002027001F000000000000000000000000D2
-:10F8D0000000000000000000000000000000000028
-:10F8E0000000000000000000000000000000000018
-:10F8F0000000000000000000000000000000000008
-:10F9000000000000000000000000000000000000F7
-:10F9100000000000000000000000000000000000E7
-:10F9200000000000000000000000000000000000D7
-:10F9300000000000000000000000000000000000C7
-:10F9400000000000000000000000000000000000B7
-:10F9500000000000000000000000000000000000A7
-:10F960000000000000000000000000000000000097
-:10F970000000000000000000000000000000000087
-:10F980000000000000000000000000000000000077
-:10F990000000000000000000000000000000000067
-:10F9A0000000000000000000000000000000000057
-:10F9B0000000000000000000000000000000000047
-:10F9C0000000000000000000000000000000000037
-:10F9D0000000000000000000000000000000000027
-:10F9E0000000000000000000000000000000000017
-:10F9F0000000000000000000000000000000000007
-:10FA000000000000000000000000000000000000F6
-:10FA100000000000000000000000000000000000E6
-:10FA200000000000000000000000000000000000D6
-:10FA300000000000000000000000000000000000C6
-:10FA400000000000000000000000000000000000B6
-:10FA500000000000000000000000000000000000A6
-:10FA60000000000000000000000000000000000096
-:10FA70000000000000000000000000000000000086
-:10FA80000000000000000000000000000000000076
-:10FA90000000000000000000000000000000000066
-:10FAA0000000000000000000000000000000000056
-:10FAB0000000000000000000000000000000000046
-:10FAC0000000000000000000000000000000000036
-:10FAD0000000000000000000000000000000000026
-:10FAE0000000000000000000000000000000000016
-:10FAF0000000000000000000000000000000000006
-:10FB000000000000000000000000000000000000F5
-:10FB100000000000000000000000000000000000E5
-:10FB200000000000000000000000000000000000D5
-:10FB300000000000000000000000000000000000C5
-:10FB400000000000000000000000000000000000B5
-:10FB500000000000000000000000000000000000A5
-:10FB60000000000000000000000000000000000095
-:10FB70000000000000000000000000000000000085
-:10FB80000000000000000000000000000000000075
-:10FB90000000000000000000000000000000000065
-:10FBA0000000000000000000000000000000000055
-:10FBB0000000000000000000000000000000000045
-:10FBC0000000000000000000000000000000000035
-:10FBD0000000000000000000000000000000000025
-:10FBE0000000000000000000000000000000000015
-:10FBF0000000000000000000000000000000000005
-:00000001FF

Bootup Logo/Logos/_clear_logo.hex

@@ -1,258 +0,0 @@
-:020000040800F2
-:10F8000000000000000000000000000000000000F8
-:10F8100000000000000000000000000000000000E8
-:10F8200000000000000000000000000000000000D8
-:10F8300000000000000000000000000000000000C8
-:10F8400000000000000000000000000000000000B8
-:10F8500000000000000000000000000000000000A8
-:10F860000000000000000000000000000000000098
-:10F870000000000000000000000000000000000088
-:10F880000000000000000000000000000000000078
-:10F890000000000000000000000000000000000068
-:10F8A0000000000000000000000000000000000058
-:10F8B0000000000000000000000000000000000048
-:10F8C0000000000000000000000000000000000038
-:10F8D0000000000000000000000000000000000028
-:10F8E0000000000000000000000000000000000018
-:10F8F0000000000000000000000000000000000008
-:10F9000000000000000000000000000000000000F7
-:10F9100000000000000000000000000000000000E7
-:10F9200000000000000000000000000000000000D7
-:10F9300000000000000000000000000000000000C7
-:10F9400000000000000000000000000000000000B7
-:10F9500000000000000000000000000000000000A7
-:10F960000000000000000000000000000000000097
-:10F970000000000000000000000000000000000087
-:10F980000000000000000000000000000000000077
-:10F990000000000000000000000000000000000067
-:10F9A0000000000000000000000000000000000057
-:10F9B0000000000000000000000000000000000047
-:10F9C0000000000000000000000000000000000037
-:10F9D0000000000000000000000000000000000027
-:10F9E0000000000000000000000000000000000017
-:10F9F0000000000000000000000000000000000007
-:10FA000000000000000000000000000000000000F6
-:10FA100000000000000000000000000000000000E6
-:10FA200000000000000000000000000000000000D6
-:10FA300000000000000000000000000000000000C6
-:10FA400000000000000000000000000000000000B6
-:10FA500000000000000000000000000000000000A6
-:10FA60000000000000000000000000000000000096
-:10FA70000000000000000000000000000000000086
-:10FA80000000000000000000000000000000000076
-:10FA90000000000000000000000000000000000066
-:10FAA0000000000000000000000000000000000056
-:10FAB0000000000000000000000000000000000046
-:10FAC0000000000000000000000000000000000036
-:10FAD0000000000000000000000000000000000026
-:10FAE0000000000000000000000000000000000016
-:10FAF0000000000000000000000000000000000006
-:10FB000000000000000000000000000000000000F5
-:10FB100000000000000000000000000000000000E5
-:10FB200000000000000000000000000000000000D5
-:10FB300000000000000000000000000000000000C5
-:10FB400000000000000000000000000000000000B5
-:10FB500000000000000000000000000000000000A5
-:10FB60000000000000000000000000000000000095
-:10FB70000000000000000000000000000000000085
-:10FB80000000000000000000000000000000000075
-:10FB90000000000000000000000000000000000065
-:10FBA0000000000000000000000000000000000055
-:10FBB0000000000000000000000000000000000045
-:10FBC0000000000000000000000000000000000035
-:10FBD0000000000000000000000000000000000025
-:10FBE0000000000000000000000000000000000015
-:10FBF0000000000000000000000000000000000005
-:10F8000000000000000000000000000000000000F8
-:10F8100000000000000000000000000000000000E8
-:10F8200000000000000000000000000000000000D8
-:10F8300000000000000000000000000000000000C8
-:10F8400000000000000000000000000000000000B8
-:10F8500000000000000000000000000000000000A8
-:10F860000000000000000000000000000000000098
-:10F870000000000000000000000000000000000088
-:10F880000000000000000000000000000000000078
-:10F890000000000000000000000000000000000068
-:10F8A0000000000000000000000000000000000058
-:10F8B0000000000000000000000000000000000048
-:10F8C0000000000000000000000000000000000038
-:10F8D0000000000000000000000000000000000028
-:10F8E0000000000000000000000000000000000018
-:10F8F0000000000000000000000000000000000008
-:10F9000000000000000000000000000000000000F7
-:10F9100000000000000000000000000000000000E7
-:10F9200000000000000000000000000000000000D7
-:10F9300000000000000000000000000000000000C7
-:10F9400000000000000000000000000000000000B7
-:10F9500000000000000000000000000000000000A7
-:10F960000000000000000000000000000000000097
-:10F970000000000000000000000000000000000087
-:10F980000000000000000000000000000000000077
-:10F990000000000000000000000000000000000067
-:10F9A0000000000000000000000000000000000057
-:10F9B0000000000000000000000000000000000047
-:10F9C0000000000000000000000000000000000037
-:10F9D0000000000000000000000000000000000027
-:10F9E0000000000000000000000000000000000017
-:10F9F0000000000000000000000000000000000007
-:10FA000000000000000000000000000000000000F6
-:10FA100000000000000000000000000000000000E6
-:10FA200000000000000000000000000000000000D6
-:10FA300000000000000000000000000000000000C6
-:10FA400000000000000000000000000000000000B6
-:10FA500000000000000000000000000000000000A6
-:10FA60000000000000000000000000000000000096
-:10FA70000000000000000000000000000000000086
-:10FA80000000000000000000000000000000000076
-:10FA90000000000000000000000000000000000066
-:10FAA0000000000000000000000000000000000056
-:10FAB0000000000000000000000000000000000046
-:10FAC0000000000000000000000000000000000036
-:10FAD0000000000000000000000000000000000026
-:10FAE0000000000000000000000000000000000016
-:10FAF0000000000000000000000000000000000006
-:10FB000000000000000000000000000000000000F5
-:10FB100000000000000000000000000000000000E5
-:10FB200000000000000000000000000000000000D5
-:10FB300000000000000000000000000000000000C5
-:10FB400000000000000000000000000000000000B5
-:10FB500000000000000000000000000000000000A5
-:10FB60000000000000000000000000000000000095
-:10FB70000000000000000000000000000000000085
-:10FB80000000000000000000000000000000000075
-:10FB90000000000000000000000000000000000065
-:10FBA0000000000000000000000000000000000055
-:10FBB0000000000000000000000000000000000045
-:10FBC0000000000000000000000000000000000035
-:10FBD0000000000000000000000000000000000025
-:10FBE0000000000000000000000000000000000015
-:10FBF0000000000000000000000000000000000005
-:10F8000000000000000000000000000000000000F8
-:10F8100000000000000000000000000000000000E8
-:10F8200000000000000000000000000000000000D8
-:10F8300000000000000000000000000000000000C8
-:10F8400000000000000000000000000000000000B8
-:10F8500000000000000000000000000000000000A8
-:10F860000000000000000000000000000000000098
-:10F870000000000000000000000000000000000088
-:10F880000000000000000000000000000000000078
-:10F890000000000000000000000000000000000068
-:10F8A0000000000000000000000000000000000058
-:10F8B0000000000000000000000000000000000048
-:10F8C0000000000000000000000000000000000038
-:10F8D0000000000000000000000000000000000028
-:10F8E0000000000000000000000000000000000018
-:10F8F0000000000000000000000000000000000008
-:10F9000000000000000000000000000000000000F7
-:10F9100000000000000000000000000000000000E7
-:10F9200000000000000000000000000000000000D7
-:10F9300000000000000000000000000000000000C7
-:10F9400000000000000000000000000000000000B7
-:10F9500000000000000000000000000000000000A7
-:10F960000000000000000000000000000000000097
-:10F970000000000000000000000000000000000087
-:10F980000000000000000000000000000000000077
-:10F990000000000000000000000000000000000067
-:10F9A0000000000000000000000000000000000057
-:10F9B0000000000000000000000000000000000047
-:10F9C0000000000000000000000000000000000037
-:10F9D0000000000000000000000000000000000027
-:10F9E0000000000000000000000000000000000017
-:10F9F0000000000000000000000000000000000007
-:10FA000000000000000000000000000000000000F6
-:10FA100000000000000000000000000000000000E6
-:10FA200000000000000000000000000000000000D6
-:10FA300000000000000000000000000000000000C6
-:10FA400000000000000000000000000000000000B6
-:10FA500000000000000000000000000000000000A6
-:10FA60000000000000000000000000000000000096
-:10FA70000000000000000000000000000000000086
-:10FA80000000000000000000000000000000000076
-:10FA90000000000000000000000000000000000066
-:10FAA0000000000000000000000000000000000056
-:10FAB0000000000000000000000000000000000046
-:10FAC0000000000000000000000000000000000036
-:10FAD0000000000000000000000000000000000026
-:10FAE0000000000000000000000000000000000016
-:10FAF0000000000000000000000000000000000006
-:10FB000000000000000000000000000000000000F5
-:10FB100000000000000000000000000000000000E5
-:10FB200000000000000000000000000000000000D5
-:10FB300000000000000000000000000000000000C5
-:10FB400000000000000000000000000000000000B5
-:10FB500000000000000000000000000000000000A5
-:10FB60000000000000000000000000000000000095
-:10FB70000000000000000000000000000000000085
-:10FB80000000000000000000000000000000000075
-:10FB90000000000000000000000000000000000065
-:10FBA0000000000000000000000000000000000055
-:10FBB0000000000000000000000000000000000045
-:10FBC0000000000000000000000000000000000035
-:10FBD0000000000000000000000000000000000025
-:10FBE0000000000000000000000000000000000015
-:10FBF0000000000000000000000000000000000005
-:10F8000000000000000000000000000000000000F8
-:10F8100000000000000000000000000000000000E8
-:10F8200000000000000000000000000000000000D8
-:10F8300000000000000000000000000000000000C8
-:10F8400000000000000000000000000000000000B8
-:10F8500000000000000000000000000000000000A8
-:10F860000000000000000000000000000000000098
-:10F870000000000000000000000000000000000088
-:10F880000000000000000000000000000000000078
-:10F890000000000000000000000000000000000068
-:10F8A0000000000000000000000000000000000058
-:10F8B0000000000000000000000000000000000048
-:10F8C0000000000000000000000000000000000038
-:10F8D0000000000000000000000000000000000028
-:10F8E0000000000000000000000000000000000018
-:10F8F0000000000000000000000000000000000008
-:10F9000000000000000000000000000000000000F7
-:10F9100000000000000000000000000000000000E7
-:10F9200000000000000000000000000000000000D7
-:10F9300000000000000000000000000000000000C7
-:10F9400000000000000000000000000000000000B7
-:10F9500000000000000000000000000000000000A7
-:10F960000000000000000000000000000000000097
-:10F970000000000000000000000000000000000087
-:10F980000000000000000000000000000000000077
-:10F990000000000000000000000000000000000067
-:10F9A0000000000000000000000000000000000057
-:10F9B0000000000000000000000000000000000047
-:10F9C0000000000000000000000000000000000037
-:10F9D0000000000000000000000000000000000027
-:10F9E0000000000000000000000000000000000017
-:10F9F0000000000000000000000000000000000007
-:10FA000000000000000000000000000000000000F6
-:10FA100000000000000000000000000000000000E6
-:10FA200000000000000000000000000000000000D6
-:10FA300000000000000000000000000000000000C6
-:10FA400000000000000000000000000000000000B6
-:10FA500000000000000000000000000000000000A6
-:10FA60000000000000000000000000000000000096
-:10FA70000000000000000000000000000000000086
-:10FA80000000000000000000000000000000000076
-:10FA90000000000000000000000000000000000066
-:10FAA0000000000000000000000000000000000056
-:10FAB0000000000000000000000000000000000046
-:10FAC0000000000000000000000000000000000036
-:10FAD0000000000000000000000000000000000026
-:10FAE0000000000000000000000000000000000016
-:10FAF0000000000000000000000000000000000006
-:10FB000000000000000000000000000000000000F5
-:10FB100000000000000000000000000000000000E5
-:10FB200000000000000000000000000000000000D5
-:10FB300000000000000000000000000000000000C5
-:10FB400000000000000000000000000000000000B5
-:10FB500000000000000000000000000000000000A5
-:10FB60000000000000000000000000000000000095
-:10FB70000000000000000000000000000000000085
-:10FB80000000000000000000000000000000000075
-:10FB90000000000000000000000000000000000065
-:10FBA0000000000000000000000000000000000055
-:10FBB0000000000000000000000000000000000045
-:10FBC0000000000000000000000000000000000035
-:10FBD0000000000000000000000000000000000025
-:10FBE0000000000000000000000000000000000015
-:10FBF0000000000000000000000000000000000005
-:00000001FF

Bootup Logo/README.md

@@ -0,0 +1,7 @@
+# Bootup logo's
+
+IronOS supports both a bootup logo _AND_ bootup animations.
+
+However, they are no longer included in this repo.
+
+(Please read the docs)[../Documentation/Logo.md]

Bootup Logo/python_logo_converter/img2ts100.py

@@ -1,241 +0,0 @@
-#!/usr/bin/env python
-# coding=utf-8
-from __future__ import division
-import os
-import sys
-
-
-try:
-    from PIL import Image, ImageOps
-except ImportError as error:
-    raise ImportError("{}: {} requres Python Imaging Library (PIL). " 
-                      "Install with `pip` or OS-specific package "
-                      "management tool."
-                      .format(error, sys.argv[0]))
-
-VERSION_STRING = '0.01'
-
-LCD_WIDTH       = 96
-LCD_HEIGHT      = 16
-LCD_NUM_BYTES   = LCD_WIDTH * LCD_HEIGHT // 8
-LCD_PADDED_SIZE = 1024
-
-INTELHEX_DATA_RECORD                    = 0x00
-INTELHEX_END_OF_FILE_RECORD             = 0x01
-INTELHEX_EXTENDED_LINEAR_ADDRESS_RECORD = 0x04
-INTELHEX_BYTES_PER_LINE                 = 16
-INTELHEX_MINIMUM_SIZE                   = 4096
-
-
-def split16(word):
-    """return high and low byte of 16-bit word value as tuple"""
-    return (word >> 8) & 0xff, word & 0xff
-
-
-def intel_hex_line(file, record_type, offset, data):
-    """write a line of data in Intel hex format"""
-    # length, address offset, record type
-    record_length = len(data)
-    file.write(':{:02X}{:04X}{:02X}'.format(record_length, offset, record_type))
-
-    # data
-    map(lambda byte: file.write("{:02X}".format(byte)), data)
-
-    # compute and write checksum (with DOS line ending for compatibility/safety)
-    file.write("{:02X}\r\n"
-               .format(((sum(data,                   # sum data ...
-                             record_length           # ... and other ...
-                             + sum(split16(offset))  # ... fields ...
-                             + record_type)          # ... on line
-                         & 0xff)                     # low 8 bits
-                        ^ 0xff)                      # two's ...
-                       + 1))                         # ... complement
-
-
-def intel_hex(file, bytes_, start_address=0x0):
-    """write block of data in Intel hex format"""
-    if len(bytes_) % INTELHEX_BYTES_PER_LINE != 0:
-        raise ValueError("Program error: Size of LCD data is not evenly divisible by {}"
-                         .format(INTELHEX_BYTES_PER_LINE))
-
-    address_lo =  start_address        & 0xffff
-    address_hi = (start_address >> 16) & 0xffff
-
-    intel_hex_line(file,
-                   INTELHEX_EXTENDED_LINEAR_ADDRESS_RECORD,
-                   0,
-                   split16(address_hi))
-
-    size_written = 0
-    while size_written < INTELHEX_MINIMUM_SIZE:
-        offset = address_lo
-        for line_start in range(0, len(bytes_), INTELHEX_BYTES_PER_LINE):
-            intel_hex_line(file,
-                           INTELHEX_DATA_RECORD,
-                           offset,
-                           bytes_[line_start:line_start + INTELHEX_BYTES_PER_LINE])
-            size_written += INTELHEX_BYTES_PER_LINE
-            if size_written >= INTELHEX_MINIMUM_SIZE:
-                break
-            offset += INTELHEX_BYTES_PER_LINE
-
-    intel_hex_line(file, INTELHEX_END_OF_FILE_RECORD, 0, ())
-
-
-def img2hex(input_filename,
-            output_file,
-            preview_filename=None,
-            threshold=128,
-            dither=False,
-            negative=False):
-    """
-    Convert 'input_filename' image file into Intel hex format with data
-        formatted for display on TS100 LCD and file object.
-    Input image is converted from color or grayscale to black-and-white,
-        and resized to fit TS100 LCD screen as necessary.
-    Optionally write resized/thresholded/black-and-white preview image
-        to file specified by name.
-    Optional `threshold' argument 8 bit value; grayscale pixels greater than
-        this become 1 (white) in output, less than become 0 (black).
-    Unless optional `dither', in which case PIL grayscale-to-black/white
-        dithering algorithm used.
-    Optional `negative' inverts black/white regardless of input image type
-        or other options.
-    """
-
-    try:
-        image = Image.open(input_filename)
-    except BaseException as e:
-        raise IOError("error reading image file \"{}\": {}".format(input_filename, e))
-
-    # convert to luminance
-    # do even if already black/white because PIL can't invert 1-bit so
-    #   can't just pass thru in case --negative flag
-    # also resizing works better in luminance than black/white
-    # also no information loss converting black/white to grayscale
-    if image.mode != 'L':
-        image = image.convert('L')
-
-    if image.size != (LCD_WIDTH, LCD_HEIGHT):
-        image = image.resize((LCD_WIDTH, LCD_HEIGHT), Image.BICUBIC)
-
-    if negative:
-        image = ImageOps.invert(image)
-        threshold = 255 - threshold  # have to invert threshold
-
-    if dither:
-        image = image.convert('1')
-    else:
-        image = image.point(lambda pixel: 0 if pixel < threshold else 1, '1')
-
-    if preview_filename:
-        image.save(preview_filename)
-
-    ''' DEBUG
-    for row in range(LCD_HEIGHT):
-        for column in range(LCD_WIDTH):
-            if image.getpixel((column, row)): sys.stderr.write('1')
-            else:                             sys.stderr.write('0')
-        sys.stderr.write('\n')
-    '''
-
-    # pad to this size (also will be repeated in output Intel hex file)
-    data = [0] * LCD_PADDED_SIZE
-
-    # magic/undocumented/required header in endian-reverse byte order
-    data[0] = 0x55
-    data[1] = 0xAA
-    data[2] = 0x0D
-    data[3] = 0xF0
-
-    # convert to TS100 LCD format
-    for ndx in range(LCD_WIDTH * 16 // 8):
-        bottom_half_offset = 0 if ndx < LCD_WIDTH else 8
-        byte = 0
-        for y in range(8):
-            if image.getpixel((ndx % LCD_WIDTH, y + bottom_half_offset)):
-                byte |= 1 << y
-        # store in endian-reversed byte order
-        data[4 + ndx + (1 if ndx % 2 == 0 else -1)] = byte
-
-    intel_hex(output_file, data, 0x0800F800)
-
-
-def parse_commandline():
-    parser = argparse.ArgumentParser(
-                formatter_class=argparse.ArgumentDefaultsHelpFormatter,
-                description="Convert image file for display on TS100 LCD "
-                            "at startup")
-
-    def zero_to_255(text):
-        value = int(text)
-        if not 0 <= value <= 255:
-            raise argparse.ArgumentTypeError("must be integer from 0 to 255 ")
-        return value
-
-    parser.add_argument('input_filename',
-                        help="input image file")
-
-    parser.add_argument('output_filename',
-                        help="output Intel hex file")
-
-    parser.add_argument('-p', '--preview',
-                        help="filename of image preview (same data as "
-                             "Intel hex file, as will appear on TS100 LCD)")
-
-    parser.add_argument('-n', '--negative',
-                        action='store_true',
-                        help="photo negative: exchange black and white "
-                              "in output")
-
-    parser.add_argument('-t', '--threshold',
-                        type=zero_to_255,
-                        default=128,
-                        help="0 to 255: gray (or color converted to gray) "
-                             "above this becomes white, below becomes black; "
-                             "ignored if using --dither")
-
-    parser.add_argument('-d', '--dither',
-                        action='store_true',
-                        help="use dithering (speckling) to convert gray or "
-                             "color to black and white")
-
-    parser.add_argument('-f', '--force',
-                        action='store_true',
-                        help="force overwriting of existing files")
-
-    parser.add_argument('-v', '--version',
-                        action='version',
-                        version="%(prog)s version " + VERSION_STRING,
-                        help="print version info")
-
-    return parser.parse_args()
-
-
-if __name__ == "__main__":
-    import argparse
-    args = parse_commandline()
-
-    if os.path.exists(args.output_filename) and not args.force:
-        sys.stderr.write("Won't overwrite existing file \"{}\" (use --force "
-                         "option to override)\n"
-                         .format(args.output_filename))
-        sys.exit(1)
-
-    if args.preview and os.path.exists(args.preview) and not args.force:
-        sys.stderr.write("Won't overwrite existing file \"{}\" (use --force "
-                         "option to override)\n"
-                         .format(args.preview))
-        sys.exit(1)
-
-    try:
-        with open(args.output_filename, 'w') as output:
-            img2hex(args.input_filename,
-                    output,
-                    args.preview,
-                    args.threshold,
-                    args.dither,
-                    args.negative)
-    except BaseException as error:
-        sys.stderr.write("Error converting file: {}\n".format(error))
-        sys.exit(1)

Development Resources/TS100/TS100.ioc

@@ -11,13 +11,15 @@ ADC1.DiscontinuousConvMode=DISABLE
 ADC1.EnableAnalogWatchDog=false
 ADC1.EnableRegularConversion=ENABLE
 ADC1.ExternalTrigConv=ADC_SOFTWARE_START
-ADC1.ExternalTrigInjecConv=ADC_EXTERNALTRIGINJECCONV_T3_CC4
-ADC1.IPParameters=Rank-0\#ChannelRegularConversion,Channel-0\#ChannelRegularConversion,SamplingTime-0\#ChannelRegularConversion,NbrOfConversionFlag,DataAlign,ScanConvMode,ContinuousConvMode,DiscontinuousConvMode,EnableRegularConversion,NbrOfConversion,ExternalTrigConv,InjNumberOfConversion,EnableAnalogWatchDog,Rank-1\#ChannelRegularConversion,Channel-1\#ChannelRegularConversion,SamplingTime-1\#ChannelRegularConversion,master,Rank-2\#ChannelInjectedConversion,Channel-2\#ChannelInjectedConversion,SamplingTime-2\#ChannelInjectedConversion,InjectedOffset-2\#ChannelInjectedConversion,Rank-3\#ChannelInjectedConversion,Channel-3\#ChannelInjectedConversion,SamplingTime-3\#ChannelInjectedConversion,InjectedOffset-3\#ChannelInjectedConversion,Rank-4\#ChannelInjectedConversion,Channel-4\#ChannelInjectedConversion,SamplingTime-4\#ChannelInjectedConversion,InjectedOffset-4\#ChannelInjectedConversion,Rank-5\#ChannelInjectedConversion,Channel-5\#ChannelInjectedConversion,SamplingTime-5\#ChannelInjectedConversion,InjectedOffset-5\#ChannelInjectedConversion,ExternalTrigInjecConv
+ADC1.ExternalTrigInjecConv=ADC_EXTERNALTRIGINJECCONV_T2_CC1
+ADC1.IPParameters=Rank-0\#ChannelRegularConversion,Channel-0\#ChannelRegularConversion,SamplingTime-0\#ChannelRegularConversion,NbrOfConversionFlag,DataAlign,ScanConvMode,ContinuousConvMode,DiscontinuousConvMode,EnableRegularConversion,NbrOfConversion,ExternalTrigConv,InjNumberOfConversion,EnableAnalogWatchDog,Rank-1\#ChannelRegularConversion,Channel-1\#ChannelRegularConversion,SamplingTime-1\#ChannelRegularConversion,master,Rank-2\#ChannelInjectedConversion,Channel-2\#ChannelInjectedConversion,SamplingTime-2\#ChannelInjectedConversion,InjectedOffset-2\#ChannelInjectedConversion,Rank-3\#ChannelInjectedConversion,Channel-3\#ChannelInjectedConversion,SamplingTime-3\#ChannelInjectedConversion,InjectedOffset-3\#ChannelInjectedConversion,Rank-4\#ChannelInjectedConversion,Channel-4\#ChannelInjectedConversion,SamplingTime-4\#ChannelInjectedConversion,InjectedOffset-4\#ChannelInjectedConversion,Rank-5\#ChannelInjectedConversion,Channel-5\#ChannelInjectedConversion,SamplingTime-5\#ChannelInjectedConversion,InjectedOffset-5\#ChannelInjectedConversion,ExternalTrigInjecConv,InjectedConvMode,Mode
 ADC1.InjNumberOfConversion=4
+ADC1.InjectedConvMode=None
 ADC1.InjectedOffset-2\#ChannelInjectedConversion=0
 ADC1.InjectedOffset-3\#ChannelInjectedConversion=0
 ADC1.InjectedOffset-4\#ChannelInjectedConversion=0
 ADC1.InjectedOffset-5\#ChannelInjectedConversion=0
+ADC1.Mode=ADC_DUALMODE_REGSIMULT_INJECSIMULT
 ADC1.NbrOfConversion=2
 ADC1.NbrOfConversionFlag=1
 ADC1.Rank-0\#ChannelRegularConversion=1
@@ -34,36 +36,67 @@ ADC1.SamplingTime-4\#ChannelInjectedConversion=ADC_SAMPLETIME_239CYCLES_5
 ADC1.SamplingTime-5\#ChannelInjectedConversion=ADC_SAMPLETIME_71CYCLES_5
 ADC1.ScanConvMode=ADC_SCAN_ENABLE
 ADC1.master=1
-Dma.ADC1.0.Direction=DMA_PERIPH_TO_MEMORY
-Dma.ADC1.0.Instance=DMA1_Channel1
-Dma.ADC1.0.MemDataAlignment=DMA_MDATAALIGN_HALFWORD
-Dma.ADC1.0.MemInc=DMA_MINC_ENABLE
-Dma.ADC1.0.Mode=DMA_CIRCULAR
-Dma.ADC1.0.PeriphDataAlignment=DMA_PDATAALIGN_HALFWORD
-Dma.ADC1.0.PeriphInc=DMA_PINC_DISABLE
-Dma.ADC1.0.Priority=DMA_PRIORITY_VERY_HIGH
-Dma.ADC1.0.RequestParameters=Instance,Direction,PeriphInc,MemInc,PeriphDataAlignment,MemDataAlignment,Mode,Priority
-Dma.I2C1_RX.1.Direction=DMA_PERIPH_TO_MEMORY
-Dma.I2C1_RX.1.Instance=DMA1_Channel7
-Dma.I2C1_RX.1.MemDataAlignment=DMA_MDATAALIGN_BYTE
-Dma.I2C1_RX.1.MemInc=DMA_MINC_ENABLE
-Dma.I2C1_RX.1.Mode=DMA_NORMAL
-Dma.I2C1_RX.1.PeriphDataAlignment=DMA_PDATAALIGN_BYTE
-Dma.I2C1_RX.1.PeriphInc=DMA_PINC_DISABLE
-Dma.I2C1_RX.1.Priority=DMA_PRIORITY_MEDIUM
-Dma.I2C1_RX.1.RequestParameters=Instance,Direction,PeriphInc,MemInc,PeriphDataAlignment,MemDataAlignment,Mode,Priority
-Dma.I2C1_TX.2.Direction=DMA_MEMORY_TO_PERIPH
-Dma.I2C1_TX.2.Instance=DMA1_Channel6
-Dma.I2C1_TX.2.MemDataAlignment=DMA_MDATAALIGN_BYTE
-Dma.I2C1_TX.2.MemInc=DMA_MINC_ENABLE
-Dma.I2C1_TX.2.Mode=DMA_NORMAL
-Dma.I2C1_TX.2.PeriphDataAlignment=DMA_PDATAALIGN_BYTE
-Dma.I2C1_TX.2.PeriphInc=DMA_PINC_DISABLE
-Dma.I2C1_TX.2.Priority=DMA_PRIORITY_MEDIUM
-Dma.I2C1_TX.2.RequestParameters=Instance,Direction,PeriphInc,MemInc,PeriphDataAlignment,MemDataAlignment,Mode,Priority
-Dma.Request0=ADC1
-Dma.Request1=I2C1_RX
-Dma.Request2=I2C1_TX
+ADC2.Channel-0\#ChannelRegularConversion=ADC_CHANNEL_8
+ADC2.Channel-1\#ChannelInjectedConversion=ADC_CHANNEL_8
+ADC2.Channel-2\#ChannelInjectedConversion=ADC_CHANNEL_8
+ADC2.Channel-3\#ChannelInjectedConversion=ADC_CHANNEL_8
+ADC2.Channel-4\#ChannelInjectedConversion=ADC_CHANNEL_8
+ADC2.ContinuousConvMode=DISABLE
+ADC2.DataAlign=ADC_DATAALIGN_RIGHT
+ADC2.DiscontinuousConvMode=DISABLE
+ADC2.EnableAnalogWatchDog=false
+ADC2.EnableRegularConversion=ENABLE
+ADC2.IPParameters=Rank-0\#ChannelRegularConversion,Channel-0\#ChannelRegularConversion,SamplingTime-0\#ChannelRegularConversion,NbrOfConversionFlag,Rank-1\#ChannelInjectedConversion,Channel-1\#ChannelInjectedConversion,SamplingTime-1\#ChannelInjectedConversion,InjectedOffset-1\#ChannelInjectedConversion,Rank-2\#ChannelInjectedConversion,Channel-2\#ChannelInjectedConversion,SamplingTime-2\#ChannelInjectedConversion,InjectedOffset-2\#ChannelInjectedConversion,Rank-3\#ChannelInjectedConversion,Channel-3\#ChannelInjectedConversion,SamplingTime-3\#ChannelInjectedConversion,InjectedOffset-3\#ChannelInjectedConversion,Rank-4\#ChannelInjectedConversion,Channel-4\#ChannelInjectedConversion,SamplingTime-4\#ChannelInjectedConversion,InjectedOffset-4\#ChannelInjectedConversion,InjNumberOfConversion,Mode,DataAlign,ScanConvMode,ContinuousConvMode,DiscontinuousConvMode,EnableRegularConversion,NbrOfConversion,InjectedConvMode,EnableAnalogWatchDog
+ADC2.InjNumberOfConversion=4
+ADC2.InjectedConvMode=None
+ADC2.InjectedOffset-1\#ChannelInjectedConversion=0
+ADC2.InjectedOffset-2\#ChannelInjectedConversion=0
+ADC2.InjectedOffset-3\#ChannelInjectedConversion=0
+ADC2.InjectedOffset-4\#ChannelInjectedConversion=0
+ADC2.Mode=ADC_DUALMODE_REGSIMULT_INJECSIMULT
+ADC2.NbrOfConversion=1
+ADC2.NbrOfConversionFlag=1
+ADC2.Rank-0\#ChannelRegularConversion=1
+ADC2.Rank-1\#ChannelInjectedConversion=1
+ADC2.Rank-2\#ChannelInjectedConversion=2
+ADC2.Rank-3\#ChannelInjectedConversion=3
+ADC2.Rank-4\#ChannelInjectedConversion=4
+ADC2.SamplingTime-0\#ChannelRegularConversion=ADC_SAMPLETIME_1CYCLE_5
+ADC2.SamplingTime-1\#ChannelInjectedConversion=ADC_SAMPLETIME_1CYCLE_5
+ADC2.SamplingTime-2\#ChannelInjectedConversion=ADC_SAMPLETIME_1CYCLE_5
+ADC2.SamplingTime-3\#ChannelInjectedConversion=ADC_SAMPLETIME_1CYCLE_5
+ADC2.SamplingTime-4\#ChannelInjectedConversion=ADC_SAMPLETIME_1CYCLE_5
+ADC2.ScanConvMode=ADC_SCAN_ENABLE
+Dma.ADC1.2.Direction=DMA_PERIPH_TO_MEMORY
+Dma.ADC1.2.Instance=DMA1_Channel1
+Dma.ADC1.2.MemDataAlignment=DMA_MDATAALIGN_HALFWORD
+Dma.ADC1.2.MemInc=DMA_MINC_ENABLE
+Dma.ADC1.2.Mode=DMA_CIRCULAR
+Dma.ADC1.2.PeriphDataAlignment=DMA_PDATAALIGN_HALFWORD
+Dma.ADC1.2.PeriphInc=DMA_PINC_DISABLE
+Dma.ADC1.2.Priority=DMA_PRIORITY_VERY_HIGH
+Dma.ADC1.2.RequestParameters=Instance,Direction,PeriphInc,MemInc,PeriphDataAlignment,MemDataAlignment,Mode,Priority
+Dma.I2C1_RX.0.Direction=DMA_PERIPH_TO_MEMORY
+Dma.I2C1_RX.0.Instance=DMA1_Channel7
+Dma.I2C1_RX.0.MemDataAlignment=DMA_MDATAALIGN_BYTE
+Dma.I2C1_RX.0.MemInc=DMA_MINC_ENABLE
+Dma.I2C1_RX.0.Mode=DMA_NORMAL
+Dma.I2C1_RX.0.PeriphDataAlignment=DMA_PDATAALIGN_BYTE
+Dma.I2C1_RX.0.PeriphInc=DMA_PINC_DISABLE
+Dma.I2C1_RX.0.Priority=DMA_PRIORITY_MEDIUM
+Dma.I2C1_RX.0.RequestParameters=Instance,Direction,PeriphInc,MemInc,PeriphDataAlignment,MemDataAlignment,Mode,Priority
+Dma.I2C1_TX.1.Direction=DMA_MEMORY_TO_PERIPH
+Dma.I2C1_TX.1.Instance=DMA1_Channel6
+Dma.I2C1_TX.1.MemDataAlignment=DMA_MDATAALIGN_BYTE
+Dma.I2C1_TX.1.MemInc=DMA_MINC_ENABLE
+Dma.I2C1_TX.1.Mode=DMA_NORMAL
+Dma.I2C1_TX.1.PeriphDataAlignment=DMA_PDATAALIGN_BYTE
+Dma.I2C1_TX.1.PeriphInc=DMA_PINC_DISABLE
+Dma.I2C1_TX.1.Priority=DMA_PRIORITY_MEDIUM
+Dma.I2C1_TX.1.RequestParameters=Instance,Direction,PeriphInc,MemInc,PeriphDataAlignment,MemDataAlignment,Mode,Priority
+Dma.Request0=I2C1_RX
+Dma.Request1=I2C1_TX
+Dma.Request2=ADC1
 Dma.RequestsNb=3
 FREERTOS.FootprintOK=true
 FREERTOS.INCLUDE_vTaskDelete=0
@@ -82,16 +115,17 @@ IWDG.Prescaler=IWDG_PRESCALER_256
 KeepUserPlacement=false
 Mcu.Family=STM32F1
 Mcu.IP0=ADC1
-Mcu.IP1=DMA
-Mcu.IP2=FREERTOS
-Mcu.IP3=I2C1
-Mcu.IP4=IWDG
-Mcu.IP5=NVIC
-Mcu.IP6=RCC
-Mcu.IP7=SYS
-Mcu.IP8=TIM2
-Mcu.IP9=TIM3
-Mcu.IPNb=10
+Mcu.IP1=ADC2
+Mcu.IP10=TIM3
+Mcu.IP2=DMA
+Mcu.IP3=FREERTOS
+Mcu.IP4=I2C1
+Mcu.IP5=IWDG
+Mcu.IP6=NVIC
+Mcu.IP7=RCC
+Mcu.IP8=SYS
+Mcu.IP9=TIM2
+Mcu.IPNb=11
 Mcu.Name=STM32F103T(8-B)Ux
 Mcu.Package=VFQFPN36
 Mcu.Pin0=PA6
@@ -119,8 +153,8 @@ Mcu.PinsNb=21
 Mcu.ThirdPartyNb=0
 Mcu.UserConstants=
 Mcu.UserName=STM32F103T8Ux
-MxCube.Version=4.25.0
-MxDb.Version=DB.4.0.250
+MxCube.Version=4.26.0
+MxDb.Version=DB.4.0.260
 NVIC.ADC1_2_IRQn=true\:5\:0\:false\:false\:true\:true\:true
 NVIC.BusFault_IRQn=true\:0\:0\:false\:false\:true\:false\:true
 NVIC.DMA1_Channel1_IRQn=true\:5\:0\:false\:false\:true\:true\:true
@@ -204,7 +238,7 @@ ProjectManager.BackupPrevious=false
 ProjectManager.CompilerOptimize=3
 ProjectManager.ComputerToolchain=false
 ProjectManager.CoupleFile=false
-ProjectManager.CustomerFirmwarePackage=C\:/Users/Ralim/STM32Cube/Repository/STM32Cube_FW_F1_V1.6.1
+ProjectManager.CustomerFirmwarePackage=
 ProjectManager.DefaultFWLocation=true
 ProjectManager.DeletePrevious=true
 ProjectManager.DeviceId=STM32F103T8Ux
@@ -216,15 +250,15 @@ ProjectManager.KeepUserCode=true
 ProjectManager.LastFirmware=true
 ProjectManager.LibraryCopy=1
 ProjectManager.MainLocation=Src
-ProjectManager.PreviousToolchain=SW4STM32
+ProjectManager.PreviousToolchain=TrueSTUDIO
 ProjectManager.ProjectBuild=false
 ProjectManager.ProjectFileName=TS100.ioc
 ProjectManager.ProjectName=TS100
 ProjectManager.StackSize=0x400
-ProjectManager.TargetToolchain=SW4STM32
+ProjectManager.TargetToolchain=TrueSTUDIO
 ProjectManager.ToolChainLocation=
-ProjectManager.UnderRoot=false
-ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-HAL-true,2-MX_DMA_Init-DMA-false-HAL-true,3-MX_I2C1_Init-I2C1-false-HAL-true,4-MX_ADC1_Init-ADC1-false-HAL-true,5-SystemClock_Config-RCC-false-HAL-true,6-MX_TIM3_Init-TIM3-false-HAL-true,7-MX_IWDG_Init-IWDG-false-HAL-true,8-MX_TIM2_Init-TIM2-false-HAL-true
+ProjectManager.UnderRoot=true
+ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-HAL-true,2-MX_DMA_Init-DMA-false-HAL-true,3-MX_I2C1_Init-I2C1-false-HAL-true,4-MX_ADC1_Init-ADC1-false-HAL-true,5-SystemClock_Config-RCC-false-HAL-true,6-MX_TIM3_Init-TIM3-false-HAL-true,7-MX_IWDG_Init-IWDG-false-HAL-true,8-MX_TIM2_Init-TIM2-false-HAL-true,9-MX_ADC2_Init-ADC2-false-HAL-true
 RCC.ADCFreqValue=8000000
 RCC.ADCPresc=RCC_ADCPCLK2_DIV8
 RCC.AHBFreq_Value=64000000
@@ -249,8 +283,8 @@ RCC.USBFreq_Value=42666666.666666664
 RCC.USBPrescaler=RCC_USBCLKSOURCE_PLL_DIV1_5
 SH.ADCx_IN7.0=ADC1_IN7,IN7
 SH.ADCx_IN7.ConfNb=1
-SH.ADCx_IN8.0=ADC2_IN8
-SH.ADCx_IN8.1=ADC1_IN8,IN8
+SH.ADCx_IN8.0=ADC1_IN8,IN8
+SH.ADCx_IN8.1=ADC2_IN8,IN8
 SH.ADCx_IN8.ConfNb=2
 SH.ADCx_IN9.0=ADC2_IN9
 SH.ADCx_IN9.1=ADC1_IN9,IN9

Development Resources/TS80-Bootloader.hex

@@ -0,0 +1,515 @@
+:020000040800F2
+:2000000020310020E52E00088D2E00088F2E0008912E0008932E0008952E00080000000071
+:20002000000000000000000000000000972E0008992E0008000000009B2E00089D2E000880
+:20004000252F0008292F00082D2F0008312F0008352F0008392F00083D2F0008412F000850
+:20006000452F0008492F00084D2F0008512F0008552F0008592F00085D2F0008612F000830
+:20008000652F0008692F00086D2F0008712F00089F2E0008792F00087D2F0008812F0008E7
+:2000A000852F0008892F00088D2F0008912F0008952F0008992F00089D2F0008A12F0008F0
+:2000C000A52F0008A92F0008AD2F0008B12F0008B52F0008B92F0008BD2F0008C12F0008D0
+:2000E000C52F0008C92F0008CD2F0008D12F0008D52F0008D92F0008DD2F0008E12F0008B0
+:20010000E52F0008E92F0008ED2F0008F12F0008F52F0008F92F0008FD2F0008013000088E
+:2001200005300008093000080D3000081130000870B500F08FFEDFF8144804F510553C350F
+:200140000146284600F016FC4FF40051204600F0D1FE04F200464FF4B0720FF650213046A2
+:2001600000F0F2FE0B222946304600F0EDFE0FF6CC4518222946204600F0E6FE1822294610
+:2001800004F5007000F0E0FEDFF8C407C4F81604A0220FF6783104F5C06000F0D5FE5022F2
+:2001A0000FF6084104F5006000F0CEFE40220FF64C4104F5206000F0C7FE42F20C20011940
+:2001C0000022CA760A774A7602518A600A61CA6070BD70B50C46DFF87467B4F5805F03D1F8
+:2001E00000F044F830460EE0B4F5205F04D100F03DF806F5007006E0B4F5804F07D100F0BC
+:2002000035F806F58060BDE8704000F08DBEB4F51A4F2AD300F02AF806F5C06000F084FE98
+:200220004FF40072314606F508503C3000F08CFE42F2272085196978B9B9DFF81817098856
+:20024000825D32B9B4F52A4F00D271B100F0A2F90AE0012A09D111B1B4F51C4F02D2B4F5F1
+:200260002C4F02D300F08BFA687070BD4FF400720146704710B50446080004D14FF4007260
+:200280000FF228713DE0DFF8C416B0F5805F08BF4FF4007235D0B0F5205F04D14FF4007243
+:2002A00001F500712DE0B0F5804F04D14FF4007201F5806125E0B0F5004F05D100F02DF811
+:2002C000A0220FF648211CE0B0F5024F05D100F024F850220FF6D42113E06FF402421218EA
+:2002E00041F2FF739A4205D200F017F840220FF60C3106E0B0F51A4F08D34FF4007201F589
+:20030000C0612046BDE8104000F00EBE4FF400712046BDE8104000F053BE4FF4007120467B
+:2003200000F04EBE2DE9F84F4FF02008DFF81C5642F227277C194FF4085908EB050000F20F
+:200340000046002030733078E52818BF002800F0E580F07A202840F0E180307A482826D137
+:20036000707A452804BFB07A582840F0D08000F0DDF800207855607820B102280DD00428AB
+:2003800006D010E05220307244207072592009E0452030725220707204E04E2030724F201D
+:2003A00070725420B072F07D401CF075B4E041285AD1707A442804BFB07A52285BD100F096
+:2003C000B5F800207855607049F805004FF0020A95F80006302804BF95F8010678281ED151
+:2003E0000AEB050090F80006A0F13001C9B20A2922BFA0F14101C9B2062922BFA0F16101D3
+:20040000C9B206290BD259F805104FEA011B49F805B000F0DAF9584449F8050003E0607844
+:2004200040F0040060700AF1010ABAF10A0FCFDB6078A0B959F80500DFF81C15884202D316
+:2004400000F00FFD18B94E2030724F2004E001207855532030724520707254205BE045200E
+:2004600030725220707256E0422820D1707A492804BFB07A4E284AD100F058F8785D28B926
+:200480004E2030724F207072542004E052203072442070725920B072785D022804BF0020CC
+:2004A0007855785D012837D10220785534E053280DD1707A452804BFB07A542827D1785D80
+:2004C00060BB5520307253207072452023E0522805D1707A44281AD1B07A59280EE0552886
+:2004E00005D1707A532812D1B07A452806E0452806D1707A52280AD1B07A522807D10DE075
+:200500004E2801BF707A4F28B07A542806D04520307252207072B0720320607008F1200837
+:20052000B8F5007FFFF609AFBDE8F18FB07EF17E00EB01200005000DDFF8181408804FF434
+:200540007A7000F041BD70B542F20C25DFF8FC63AC19207F03281BD100F0F5FD0028FBD1B2
+:2005600000F03FFD4FF4C87000F02EFD012000F038FD00F0F5FD002020776076A060A8510B
+:20058000DFF8D00300210180E07E022808BFE17670BD00002DE9F04742F20424DFF8AC53BD
+:2005A00066190020F060306900EB0509F068401942F2242A0AEB050742F2292879780E29D9
+:2005C00056D8DFE801F0080C131B1F2C324146595F757B838A0090F800063A2874E000F006
+:2005E000CBF80001B0770020306173E096F81E8000F0C2F84044B077B07F5DE000F0BCF87B
+:2006000000010AE054F8058000F0B6F8404460516059F17F4118F177000260515AE000F084
+:20062000ABF800010AF8050054E01AF8058000F0A3F840440AF8050060591AF8051008182E
+:200640006051F07F081837E000F096F80001707740E096F81D8000F08FF840447077F07F41
+:20066000717F0818F0777878401C7870B07F002876D17878801C72E000F07EF8000108F8EC
+:20068000090027E018F809A000F076F8504408F809003069F17F421918F802205118F1772F
+:2006A000401C3061B17F884214D27878401E56E000F060F808EB0010F0770BE000F05AF80A
+:2006C0004044F077F07F002846D103E090F800060D2841D17878401C41E090F800060A289C
+:2006E0003AD10020F870707F042805D17879B979090401EB00607060707F012837D068BBE8
+:2007000060597168081860519349884201D202202EE0002001E03069801C30613069B17F3D
+:2007200088421BD26159401800F03BFD31694A1960590818491CB37F994218F8021008BF97
+:2007400041F47F4104D04244527801EB022189B200F016FD0428DED0042009E00020787044
+:20076000F068401CF060B0F5007FFFF41CAF0020BDE8F08796F81F8090F8000625E0F8B5EA
+:200780000024724D05F508564FF408577859F168081800F006FD601990F8001690F8010699
+:2007A00001EB002189B27859F268101800F0E8FCF168891CF160042801D00420F2BDA41CEB
+:2007C000B4F5007FE2D30020F2BD10B585B0044600A80FF2C411112200F0B6FBA4F16100E1
+:2007E000C0B21A2838BF203C002000A9415CE4B2A14204D0401CC0B21028F6D3002005B09B
+:2008000010BD2DE9F04142F21824504D6619534F327A2AB940023860480278600120307248
+:20082000307A012831D1605978B905F5005839684046FFF71FFD40229821404600F0C6FC1B
+:200840004FF4E070605140200CE040229821B868401900F5005000F0B9FC605940386051A8
+:20086000B8684030B8604021012000F05AFD3021012000F0E0FC38684030386078684038C9
+:2008800078603748816840398160786838B96051B860386033480321017000203072BDE815
+:2008A000F0812DE9F04142F21C24284D6259403266192D4F33792BB94002386048027860E3
+:2008C00001203071307901282FD1002027490AE05B1903F5005310F801C083F800C0401CEB
+:2008E00063595B1C635163599342F1D3DFF88080B8F800003968411839607A68101A7860BE
+:20090000C00507D100206051A1F5007105F50050FFF75FFC12488168B8F80020891A816030
+:200920004FF44051022000F097FC786800281EBF0C480078042806D100206051012100F0A7
+:2009400057FE00203071BDE8F0810000EC010020188DDD40102D002000400008D82C0020D3
+:20096000C82C0020942C0020E42C0020342C0020962C00201C2221FA02F303F00F030A2B69
+:20098000ACBF3733303300F8013B121F53B2002BF1D50021017070473031323334353637DF
+:2009A000383941424344454600000000EB3C904D53444F53352E3000020108000200020052
+:2009C00010F80C00010001000000000000000000000029A298E46C4E4F204E414D45202030
+:2009E0002020464154313220202033C98ED1BCF07B8ED9B800208EC0FCBD007C384E247DAE
+:200A0000248BC199E83C01721C83EB3A66A11C7C26663B07268A57FC750680CA028856025B
+:200A200080C31073EB33C98A461098F7661603461C13561E03460E13D18B7611608946FCBA
+:200A40008956FEB82000F7E68B5E0B03C348F7F30146FC114EFE61BF0000E8E600723926B9
+:200A6000382D741760B10BBEA17DF3A66174324E740983C7203BFB72E6EBDCA0FB7DB47D1B
+:200A80008BF0AC9840740C487413B40EBB0700CD10EBEFA0FD7DEBE6A0FC7DEBE1CD16CD4D
+:200AA00019268B551A52B001BB0000E83B0072E85B8A5624BE0B7C8BFCC746F03D7DC746D3
+:200AC000F4297D8CD9894EF2894EF6C606967DCBEA030000200FB6C8668B46F86603461C43
+:200AE000668BD066C1EA10EB5E0FB6C84A4A8A460D32E4F7E20346FC1356FEEB4A52500655
+:200B0000536A016A10918B4618969233D2F7F691F7F64287CAF7761A8AF28AE8C0CC020AEB
+:200B2000CCB80102807E020E7504B4428BF48A5624CD136161720B40750142035E0B4975ED
+:200B400006F8C341BB000060666A00EBB04E544C44522020202020200D0A52656D6F766544
+:200B6000206469736B73206F72206F74686572206D656469612EFF0D0A4469736B2065720E
+:200B8000726F72FF0D0A507265737320616E79206B657920746F20726573746172740D0ACF
+:200BA00000000000000000ACCBD855AA4446552056335F34325F44080000000000000000EF
+:200BC00000008A5A794500000000000042200049006E0066006F000F007272006D006100C4
+:200BE000740069006F0000006E00000001530079007300740065000F00726D0020005600BE
+:200C00006F006C00750000006D00650053595354454D7E3120202016005E63705D455D4533
+:200C2000000064705D45020000000000412E005F002E00540072000F007F610073006800B0
+:200C40006500730000000000FFFFFFFF7E3120202020202054524122004A8A5A794579459E
+:200C600000008A5A7945050000100000E552415348457E3145464D1200478A5A7945794525
+:200C800000008A5A7945040000000000412E0054007200610073000F002568006500730031
+:200CA0000000FFFFFFFF0000FFFFFFFF5452415348457E312020201200478A5A79457945AD
+:200CC00000008A5A7945040000000000412E0066007300650076000F00DA65006E0074001B
+:200CE0007300640000000000FFFFFFFF46534556454E7E3120202012004D8A5A794579458C
+:200D000000008A5A79450D00000000002E2020202020202020202010005E63705D455D4531
+:200D2000000064705D450200000000002E2E20202020202020202010005E63705D455D453A
+:200D4000000064705D4500000000000042470075006900640000000F00FFFFFFFFFFFFFF4A
+:200D6000FFFFFFFFFFFF0000FFFFFFFF0149006E006400650078000F00FF65007200560049
+:200D80006F006C00750000006D006500494E444558457E3120202020007263705D455D45BC
+:200DA000000064705D4503004C0000007B00380031004200320031003700330033002D001B
+:200DC00036003800440039002D0034003000350039002D0041003500370033002D004500AA
+:200DE000410030004400320033003200450039003300320031007D00000000002E20202088
+:200E0000202020202020203200478A5A7945794500008A5A79450400000000002E2E2020D7
+:200E2000202020202020201000478A5A7945794500008A5A7945000000000000F8FFFFFF84
+:200E4000FFFFFF6F0007800009A0000BC000FFFFFFFF0F00234801684268511880684018F9
+:200E6000704710B5FFF7F6FF1F490C6800F006F8844201D1012010BD002010BD0A231B4A3C
+:200E800001461B48FFE7F0B503F11506C3F14304C3F151050A330EE0C0EB40105F1003EB86
+:200EA00097774FEAA70CA3EB8C07FF0021FA07F7FFB238185B1C1BB2B342EDDB0DE0C0EB65
+:200EC0004010631004EB93739B10A4EB8301C90022FA01F1C9B20818641C24B2AC42EEDB1D
+:200EE000F0BD0000E8F7FF1FFC3F0008011020D502DEC0DE002200F0BDBB10B450F8041BCC
+:200F000081B102681218001D50F8043BDC0744BFA9F10104E31852F8044B43F8044B091F9C
+:200F2000F9D1EBE710BC704762B38B0708D0521E11F8013B00F8013B00F024808B07F6D13D
+:200F4000830740F0208000BF103A07D330B4B1E83810103AA0E83810F9D230BC530724BF81
+:200F6000B1E80810A0E8081044BF51F8043B40F8043BD20724BF31F8022B20F8022B44BFC4
+:200F80000B7803707047083A07D3B1E80810083A40F8043B40F804CBF7D25307E4E750F8E1
+:200FA000041B61B150F8042BD30744BFA9F101039A18002342F8043B091FFAD1EFE7704740
+:200FC000002200F071BB000000214FF6FF7302E04D4A1360491C40F2DC5242439142F7D328
+:200FE00070474A494FF400620A614FF480520A61002808680AD120F4404040F440500860E4
+:20100000086820F4402040F4403009E020F4804040F430400860086820F4802040F43020D7
+:201020000860704780F308887047704738B500F06BFB102000F0E0FB354C207820B10220D6
+:2010400000F0D4FB082502E000F0D0FB002531484168314A11434160016841F08071016064
+:20106000012000F06AFB012000F06AFB392000F094FB0028FAD0207800B1022000F063FB01
+:2010800000F068FBA842FBD10121142000F06AFB012140F20C6000F06EFB01214FF400001E
+:2010A00000F072FB207820B10120BDE8324000F056BB31BD80B501464FF0006000F047FCF5
+:2010C0004FF4A06000F012FC14208DF8000002208DF8010000208DF8020001208DF803001E
+:2010E00000A800F008FC01BD0C484FF6FF71C1600B4A02600B4A42600B48C1600B49016095
+:201100004FF08831416070470C10014004080140E8010020001002400A846800000801403B
+:201120008888880884B4BB8B000C0140884883440948012101600021016041604FF4E05142
+:20114000064A118005E0044801210160002141600321016000207047405C0040142D00209F
+:201160000448C0610221017203490162034A426208680047A02C0020D800002030010020E0
+:2011800038B504460D46104800F0A0FB05281CBF342000F07AFB29462046BDE8344000F043
+:2011A0005BBB10B50446A0050CD1074800F08EFB05281CBF342000F068FB2046BDE81040B6
+:2011C00000F02EBB10BD0000A086010010B5490001F1804101F5C041521C521009E010F8C9
+:2011E000013B10F8014B43EA042321F8023B891C521EF4D110BD490001F1804101F5C0411B
+:20120000521C521004E051F8043B20F8023B521EF9D170474FF6F8710840DFF89011086076
+:20122000704710B5DFF8882152F8203048F68F142340194324E010B5DFF8742152F82030A9
+:2012400048F6BF742340CC0648BF83F01003890648BF83F020030FE010B5DFF8542152F8E5
+:2012600020304BF68F742340CC0448BF83F48053890448BF83F4005343F4004141F08001CE
+:2012800042F8201010BDDFF8281151F820204BF68F731A4082F4405242F4004209E0DFF8A1
+:2012A000101151F8202048F68F631A4042F40042FFE742F0800241F820207047DFF8F010E1
+:2012C00051F8202052040AD551F8202048F68F731A4042F4404242F0800241F82020704791
+:2012E000334951F8202052060AD551F8202048F68F731A4042F4004242F0C00241F82020AA
+:20130000704738E0294A126892B202EBC000294A37E03BE02549096889B201EBC000254947
+:201320003AE0224A126892B202EBC000224A2AE01E4A126892B202EBC000204A02EB4000DC
+:201340003F2909D34A091F23194208BF521E1204910941F4004105E04A08C90748BF521C80
+:2013600012049109016070471049096889B201EBC000124914E00D4A126892B202EBC000E3
+:201380000F4A4908490042F8101070470749096889B201EBC0000A4951F8100080B270470C
+:2013A00051F810008005800D70470000505C0040005C004008600040046000400C6000408B
+:2013C000006000400106090C41EA10207047000080B5964890F82010022909D018D3042958
+:2013E00002D00ED3052913D1002180F820100CE0C17B28290CD1816A406ABDE8044000F09B
+:20140000FEBA0121002000F0F3F84FF440512BE101BD38B5854CE57B0220FFF7A5FF60849B
+:201420000246D8218248FFF7E6FE94F8200010B1012803D00AE0BDE8314013E02A2D06D13D
+:20144000A16A606ABDE8344000F003BB022000F0F9F82421052000F0CDFA00210220BDE8E4
+:201460003440C5E010B5714C628C1AB170492046FFF76AFD6F4861684160A1688160608CA5
+:201480001F2806D0022000F0DDF8002020601A218DE0E27B282A18BF2A2A0FD1607CA17C4D
+:2014A000090441EA0060E17C40EA0120217D08436062A07DE17D41EA0020A06220685E494A
+:2014C000884270D15D480068617B884204D3A07B401EC0B2102804D3022000F0B3F824217B
+:2014E00065E0606AA16A002A49D0032A2BD0082A18BF0A2A53D0122A29D0152A4FD01A2A30
+:201500002DD01B2A27D01D2A49D01E2A23D0232A2DD0252A2FD0282A35D02A2A37D02F2A54
+:2015200039D0552A3BD05A2A1DD0882A18BF8A2A35D08F2A18BF9E2A31D0A82A1CBFAA2A8B
+:20154000AF2A2CD02FE0BDE8104000F04BBABDE8104000F011BABDE8104000F04FBABDE87A
+:20156000104000F037BABDE8104000F037BABDE8104000F010BABDE8104000F01BBABDE856
+:20158000104000F0A5BABDE8104000F038BABDE8104000F05EBABDE8104000F083BABDE811
+:2015A000104000F09ABA022000F04CF82021052000F020FA00210120BDE8104018E010B5DD
+:2015C0000C4622469821FFF701FE21460120FFF7A8FE30210120FFF72EFE1448032180F8F3
+:2015E000201014488168091B81600021017310BD10B50C460F4B1249196018730D22982157
+:201600001846FFF7E3FD0D210120FFF78AFE0748052180F8201044B1042180F82010302199
+:201620000120BDE81040FFF706BE10BD742C0020342C0020C82C002055534243002D00203F
+:201640005553425380B518B1022807D00AD301BD10210120BDE80440FFF7EDBD1021012086
+:20166000FFF7E9FD4FF480510220BDE80440FFF7F3BD000000B500BF130096469446103943
+:2016800028BFA0E80C50FAD85FEA417C28BF0CC048BF40F8042BC90728BF20F8022B48BF83
+:2016A00000F8012B00BD0000401810F0030308D0C91A1FD3DB0748BF00F8012D28BF20F830
+:2016C000022D130030B414461546103928BF20E93C00FAD8490728BF20E90C0048BF40F85D
+:2016E000042D890028BF20F8022D48BF00F8012D30BC7047C91818BF00F8012DCB0728BF9B
+:2017000000F8012D704700002E48016841F00101016041682C4A1140416001682B4A114039
+:201720000160016821F480210160416821F4FE0141604FF41F0181607047254908607047E2
+:2017400025490860704723490A68920850EA8200086070471F48006800F00C0070471F49BF
+:20176000086070471E4A0029116814BF084321EA0000106070471B4A0029116814BF0843CB
+:2017800021EA000010607047174A0029116814BF084321EA00001060704700214209094B04
+:2017A000012A08BF1A6803D0022A0CBF1A6A5A6A012300F01F0003FA00F0024218BF012146
+:2017C00008467047001002400000FFF8FFFFF6FE000042420410024060004242D8004242AF
+:2017E00014100240181002401C100240DFF8C4100A6802F0380206E0DFF8B8100A6822F059
+:2018000010020A600A68104308607047FFE7DFF8A800DFF8A8100160DFF8A4100160704770
+:2018200038B5054600F015F804280DD1DFF89440206840F002002060656000F006F8216848
+:2018400041F6FD721140216032BD206840F0400020604FF4302039E070B504460D4600F04B
+:2018600011F804280CD1174E306840F001003060258000F007F8316841F6FE7211403160E2
+:2018800070BD08804FF4005020E00F490860704704200D490A68D20701D5012070470A68A4
+:2018A000520701D5022070470968C90648BF03207047000000200240042002402301674567
+:2018C000AB89EFCD102002400C20024010B5FFE70446FFF7DDFF03E02CB1FFF7D9FF641E61
+:2018E0000128F9D004B9052010BD00001B4908431B490860704770B503781A460121C478B7
+:20190000ECB1174B1B6803F4E063C3F5E0631B0A4478C3F10405AC4085780F2626FA03F33E
+:201920002B4023431B010F4C1355007842110E4B00F01F0001FA00F043F8220070BD5011EE
+:201940000A4A03F01F03994042F8201070BD084A1140084307490860704700000000FA0552
+:201960000CED00E000E400E000E100E080E100E080FFFF1F08ED00E07449087CC00702D577
+:201980007348052105E00FF2E410C97C252928BF2421FFF714BE6F48002181800221817117
+:2019A0000021C1714172022181720021C1720C21FFF705BE6848002101800F218170FF213E
+:2019C000C17000218180022181710021C1710821FFF7F5BD04216148FFF7F1BD0821604838
+:2019E000FFF7EDBD5948C17C132928BF12215D48FFF7E5BD5B4A90701173704769E070B588
+:201A000004460D46584E3078C0B92A462146282000F076F8C8B14D48007B000603D502205C
+:201A2000307029460CE00220FFF70CFE00F00EF801210120BDE87040FFF7DABD022804D16F
+:201A40002046BDE87040FEF7DCBE70BD24210520D0E710B5444C2278EAB90A4601462A207B
+:201A600000F04EF8E8B13948007B000608D4012020704FF440510220BDE81040FFF7ECBB80
+:201A80000020FFF7DFFDFFF7E1FF00210120BDE81040FFF7ADBD012A04BFBDE81040FEF70F
+:201AA00000BF10BD80B52948816829B9007C400702D40121002006E00220FFF7C3FDFFF79A
+:201AC000C5FF00210120FFE7BDE80440FFF790BD00BF01210020FFF78BBD80B51B4881682E
+:201AE00009B9002004E0007B00064CBF00200220FFF7A8FD2021FFF7AAFF00210120E3E7CB
+:201B000080B55118B1F5805F09D92A2804BF0220FFF798FD0020FFF795FD21210BE00B49D5
+:201B20008968B1EB422F0ED02A280CBF02200020FFF788FD2421FFF78AFF00210120FFF7F3
+:201B400057FD002002BD012002BD0000742C0020EC2C0020BC010020F42C0020E401002058
+:201B6000D8010020A8010020942C002000800202200000005669727475616C204446552019
+:201B80004469736B20202020202020202020202010B5DFF8884700B92BE000F096F8006825
+:201BA000804720680A3010BD80B5DFF870070068C178DFF86C2752788A420CD38278002AA8
+:201BC00004BF8288002A06D1817200F07EF840688047002002BD022002BD10B5DFF83C4790
+:201BE00000B906E000F071F88068804720680C3010BD206801210182002010BD10B5DFF8F7
+:201C00001C472068C1784079DFF8182712689269904721688A7A92B1002804BF0879002821
+:201C20000DD1887858B900F050F8C068804720684179C1722068C1780173002010BD0220D5
+:201C400010BD1CB5DFF8D416096810B90220088239E0DFF8D44600202080087800227F2331
+:201C6000184215D1487A81064CBF42F0020102F0FD0121702178400654BF01F0FE0041F008
+:201C80000100207000F021F800698047204616BD00F07F03012BF9D000F07F00022812D15E
+:201CA000487900F00F0142F0010200F088FA05D500F030001028E5D12270E3E700F44050F4
+:201CC000B0F5805FF7E7002016BDDFF8600600687047F8B5DFF844060068017811F07F0123
+:201CE00004D1417A01F0DF0141724FE0022901BF41880029017900294AD1417921F08005B6
+:201D0000DFF82C460A0654F825204CBF02F0300202F44052DFF808361B789D4238D2002A67
+:201D20001CBF807A002833D0080654F825000BD500F03000102825D12846FFF7D1FA302176
+:201D40002846FFF778FA1DE000F44050B0F5805F18D148F280064BF68F7745B900F0BDFA13
+:201D60002068384080F44050304320600AE02846FFF7A4FA54F82500384080F44050304320
+:201D800044F82500FFF7A1FF406980470020F2BD0220F2BD38B5DFF884050268537923F0A6
+:201DA0008000DFF88C151C0651F820404CBF04F0300404F44054DFF868552D78A84206D2A6
+:201DC000558825B9002C1CBF927A002A01D1022032BD48F280021B0651F8203005D548F69A
+:201DE000BF74234083F0100304E04BF68F74234083F480531A4341F82020FFF766FF8069D8
+:201E00008047002032BD80B5DFF810050068417A41F020014172FFF758FFC0698047002046
+:201E200002BDDFF8F8241268538A20B98888C01A108200207047086818187047F8B5DFF892
+:201E4000DC54286800F110042688A168080018BF002E14D0A088864288BF0646304688474D
+:201E600007462088801B20806088301860800020FFF750FA324601463846FFF7BCF9DFF803
+:201E8000B464208850B1DFF8B0044FF44051018000210020FFF745FA3020308028682188F2
+:201EA000A288914228BF032101D211B105210172F1BD06210172DFF88404006880B2DFF8D4
+:201EC0008014002241F8102030203080F1BD2DE9F843DFF84844206800F110063188DFF862
+:201EE0005454002904BF007A042816D1DFF85404017801290DD1DFF84414096889B2DFF85F
+:201F00004024002342F8113030212980042703702CE007271020288028E0B6F8048088450E
+:201F200005D30427414588BF4146884600E002274046B168884781460020FFF7EAF94246BD
+:201F400001464846FFF742F941460020FFF7E9F93088A0EB08003080708840447080302045
+:201F60002880DFF8D4034FF44051018020680772BDE8F18338B5DFF8A44320684578017833
+:201F80007F22114238D1092D02D1FFF70DFE47E0052D1BD1C17880294FD28178002901BF10
+:201FA00081880029807A002847D10620DFF88C13096889B2DFF88823002342F81130DFF876
+:201FC000741330220A802168087231BD032D08D1C178012904BF8088002823D1FFF713FF52
+:201FE0001EE0012D04BFC17801291BD18188C9B9407A80060DD415E001F07F00012804D194
+:020000040800F2
+:202000000B2D0FD1FFF7FAFD0AE002280AD1012D02D1FFF75EFE03E0032D03D1FFF7BAFEE4
+:202020000028C2D02846BF49096849698847032808BF0920C7D00028B7D00820C3E738B55E
+:20204000B64D28684178B74C062913D101787F2211422AD18078012802D12068C16968E0C8
+:20206000022802D12068016A63E003281DD12068416A5EE000293DD14188002904BFC1886E
+:20208000022912D1017981B901787F22114204BF8288002A2CD001F07F02012A10D100F0B0
+:2020A00089F810B92868807A10BB28684078216809698847032845D128680921017231BD13
+:2020C00001F07F010229F0D1407900F00F0100F0700200F074F84CBF00F0300000F440507D
+:2020E0008F4B1B789942E0D2002ADED10028DCD095491EE0082905D100787F210842D4D14F
+:20210000924916E00A2902BF017801F07F010129CBD1817A0029C8D04188002901BF017962
+:202120000029C1880129C0D100F044F80028BCD187490800B9D028680022428281610020B8
+:202140008847002029680A8A4FF6FF739A4208BF092004D0022818BF002A02D10820087274
+:2021600031BD087800061ED5C88800902368009C944202D2009808820FE082420DD293F808
+:202180002C00704C824238BF002005D392FBF0F500FB152008B90120207093F82C008882CF
+:2021A000BDE8314093E60320087263484FF44051018031BD002140792268926910475C4BA8
+:2021C000000653F82100704738B55C48006880B2604931F81000400000F1804000F5C040E3
+:2021E0004E4C21680A7A092A14D010F8012B0A70216810F8012B4A70851C35F8040BFFF729
+:20220000E1F8216848802888FFF7DCF821688880A888C8802068012101722068C08810B95B
+:20222000FFF7A8FE01E0FFF70AFFBDE831403EE010B53A4C2068017A022918BF042904D19C
+:20224000FFF745FE2068007A14E0062911D14178052902BF01787F22114206D1C07800F02A
+:2022600042F8FFF732FD006A80472E48006880688047082017E010B5284C2068007A0228BD
+:2022800018BF04280ED0032818BF052804D1FFF7D5FD2068007A06E0072803D121480068D5
+:2022A000C0688047082021680872BDE8104080B500F013F819480068017A082906D11E492C
+:2022C0004FF480520A801B4910220A80007A092801D1012002BD002002BD1F4890F82C10D8
+:2022E0000020FFF725B870B50D4909780022104B48F68F760BE0D4B253F824503540254322
+:2023000045F4004545F0800543F82450521C8A42F1D340F080001149086070BDBC2C002031
+:20232000E0010020C02C0020082D0020C42C0020005C00400E2D00200C2D0020505C0040EF
+:2023400004600040172D0020431C0008911B0008DB1B000808600040D80000204C5C0040D4
+:2023600070470000F8B58478303CE4B20A2C38BF2246C478303CE4B20A2C38BF234600781A
+:202380003038C0B20A2838BF01460024534818250FF2A016271805FB014C1CF806C087F85B
+:2023A00060C005FB024C1CF806C087F890C005FB034C1CF806C087F8A8C0641C182CE9DB6E
+:2023C00000240C2201460C206043C0B200F004F8641C082CF5DBF1BD70B504460D461646E7
+:2023E000002100F04BF8761C2946F0B200F035F805460121204600F041F82946F0B2BDE817
+:2024000070402AE03749086037483C2202700968C9B2334800F09AB910B58CB000A80FF277
+:20242000DC013022FEF790FD2E2200F03CF82F4C4FF48071204600F006FA0220FEF7C4FD9A
+:202440004FF48071204600F0FCF90220FEF7BCFD2E20FFF7D7FF0CB010BD10B50C4620490A
+:2024600040220A70012203E014F8013B5354521C8242F9DBFFF7C6FF204610BD30B583B07F
+:2024800000AA0FF2A80330CB30C28DF80500012904BFB1208DF80100082200F004F80820ED
+:2024A000FFF7B0FF37BD00A90D48FEF73DBD10B500212020FFF7E2FF094C00F019F88020A3
+:2024C000FFF7A0FF01212020FFF7D8FF00F010F88020BDE8104095E700000000000000200F
+:2024E00034260020FC2C0020162D002000080140402020707F21601CFEF762BD80AE80D5CB
+:20250000805280A8800F80C880D38000804080A1808D801480DA8002808180E080D980F18E
+:2025200080DB803080A480A680AF000080B080218020807F00E010080810E00000000000B7
+:20254000000F102020100F0000000000001010F800000000000000000020203F2020000026
+:2025600000000000007008080888700000000000003028242221300000000000003008882C
+:2025800088483000000000000018202020110E00000000000000C02010F8000000000000BC
+:2025A00000070424243F24000000000000F8088888080800000000000019212020110E00AC
+:2025C0000000000000E010888818000000000000000F112020110E0000000000003808081C
+:2025E000C8380800000000000000003F000000000000000000708808088870000000000094
+:20260000001C222121221C000000000000E010080810E000000000000000312222110F0077
+:20262000000000000000000000000000000000000030300000000000000000007047424AF7
+:20264000012903D10146104600F0FBB819B90146104600F0F8B8704780B501210820FFF701
+:202660008AF8C020ADF8000014208DF8030003208DF8020000A9344800F07EF800F00EF86C
+:2026800000F055F800F056F800F057F8002100F04FF800F052F800F001F801BD00214020C6
+:2026A000CDE780B5FFF7FAFF002100F041F800F044F800F03FF800F040F800F038F800F06D
+:2026C0003CF8FFF7EBFF0520BDE80240B6E738B50446082508E000F02BF800F02EF800F0D8
+:2026E00029F800F02AF864002846451EC0B230B1FFF7D4FF20064CBF01210021EBE7FFF71A
+:20270000CDFF00F014F8FF2400F017F800F017F848B900F00FF800F010F8FFF7BFFF00F03C
+:202720000CF8012032BD641EEED1002032BD0121802084E70121402081E705207EE78021F3
+:20274000014800F077B80000000C014070B504460D461646FFF780FF7000C0B201E014F862
+:20276000010BFFF7B4FF2846451EC0B20028F6D1BDE8704095E700002DE9F0410022CC78F4
+:2027800004F00F03E40644BF8C7823430C8801250F26E7B217B3D0F800C005FA02F7BE4606
+:2027A0000EEA0408F04514D14FEA820E06FA0EF82CEA080C03FA0EFE4EEA0C0C91F803E03D
+:2027C000BEF1280F08BF476103D0BEF1480F08BF0761521C082AE0D3C0F800C0B4F5807F29
+:2027E00026D3D0F804C0002202F1080705FA07F7BE460EEA0408F04515D14FEA820E06FA47
+:202800000EF82CEA080C03FA0EFE4EEA0C0C91F803E0BEF1280F08BF476191F803E0BEF153
+:20282000480F08BF0761521C082ADDD3C0F804C0BDE8F08100228068084218BF012210468C
+:2028400070470161704741617047000080B500F0F8F88B48006800218172FEF769FC8948C0
+:20286000002141604FF40441874A1180016087480021016001BD10B58548002181728048CE
+:2028800000688449C97941720020FEF7C3FC4FF400710020FEF7C5FC20210020FEF7CBFC93
+:2028A00018210020FEF72EFD7B4C00F042F858210020FEF726FD0020FEF7F1FC0020FEF7E6
+:2028C000E2FC00210120FEF7ACFC98210120FEF718FD20210120FEF7AEFC00210120FEF71F
+:2028E000BBFC00210220FEF79CFCD8210220FEF709FD94F82C100220FEF71AFD4FF4405171
+:202900000220FEF7A9FC00210220FEF794FC00F010F80020FEF7B7FC0020FFF7E4FC5B48DA
+:20292000012101605D485E4901605E480021017010BD94F82C100020FEF7FABC50480068CF
+:20294000807A00B9704780B55048052101600120FEF7C6FC0220FEF7B1FC524800210170F1
+:2029600001BD4E4800684E4988421CBF0220FEF769BE704745480421016070477047704732
+:2029800080B53F4909680A7802F07F02212A08BFFE280BD14888002801BF88880028C888C0
+:2029A000012803D10FF28900020001D1022002BD88610020488200F03BF8002002BD80B5D1
+:2029C0002F4909680A7802F07F02212A08BFFF2815D14888002804BF888800280FD1C888D7
+:2029E00068B90120FEF77CFC0220FEF767FC2B482B4901602B4800210170002002BD022060
+:202A000002BD00290CBF0028022070472649FFF708BA2649FFF705BA19490968C978062974
+:202A200001DB00207047224A02EBC101FFF7F9B928B91348006801210182002070471D489B
+:202A400070471D4801684268806801B9704710B51A4B99700C0A1C710C0C9C71090E197251
+:202A60009A72110A1973110C9973110E19749874010A1975010C9975000E187610BD0000A5
+:202A8000BC2C0020405C0040142D0020042D0020A02C0020E42C0008D8000020742C0020E4
+:202AA00055534243942C0020C8010020D001002008010020002D0020E8F7FF1F5401002047
+:202AC0002DE9F84F0020ADF8000040F68F7848F60F7B48F28006444F444CDFF81491DFF899
+:202AE00014A14BF6BF7525E054F82010ADF80010BDF8001009040BD554F8201008EA010154
+:202B000044F820103C4901EB800050F8040C8047BDF8000000060DD599F8000054F820108F
+:202B20000BEA010144F82010344901EB800050F8040C8047606CAAF80000000452D5BAF8DF
+:202B4000000010F00F0089F80000CDD120683880388800F030007880388800F44050388033
+:202B60002068284080F4005080F0200030432060BAF80000C006206805D40BEA00002060D0
+:202B8000FFF756FB16E0ADF80000BDF80000000506D5206808EA00002060FFF715FB09E0D5
+:202BA000BDF800000004C5D5206808EA00002060FFF761FB206828403988C90448BF80F47D
+:202BC00080503988890448BF80F400507988C90648BF80F010007988890648BF80F020008E
+:202BE00030432060BDE8F18F0C2D0020005C0040182D0020122D00208C01002070010020C6
+:202C00002E48016841F00101016041682C4A1140416001682B4A11400160016821F4802181
+:202C20000160416821F4FE0141604FF41F0181600021026842F4803202600268491C920358
+:202C400002D4B1F5A06FF8D10168890330D51E490A6842F010020A600A68920892000A6097
+:202C60000A6842F002020A604168416041684160416841F480614160416821F47C11416062
+:202C8000416841F4E8114160016841F08071016001688901FCD541688908890041604168FF
+:202CA00041F002014160416801F00C010829FAD106484FF000610160704700000010024044
+:202CC0000000FFF8FFFFF6FE0020024008ED00E0120100020000004083042057000201027C
+:202CE0000301000009022000010100C0320904000002080650040705810240000007050263
+:202D000002400000040309042603530054004D006900630072006F0065006C0065006300FA
+:202D2000740072006F006E0069006300730000002603530054004D003300320020004D00A2
+:202D40006100730073002000530074006F007200610067006500000010035300540020005D
+:202D60004D00610073007300FEF760F9FEF7BCF91A48006880070ED5FEF773F8184801686A
+:202D8000184A1140B1F1005F04D144680068FEF749F9A047FEE70A20FEF716F90020FEF750
+:202DA00020F9C820FEF710F90120FEF71AF90020FEF780F9FEF7D4F9FDF7BAF9FFF72CFBD7
+:202DC000FFF775FB0FF22000FFF7CCFAFEF71EFDFDF7A8FAFDF7B7FBF8E70000080C014030
+:202DE000004000080000FF2F332E34350000000070B50D4C0D4D286820800D4E20883188CF
+:202E00000840400505D50B48406880474FF6FF302860208831880840000444BFBDE8704088
+:202E2000FFF74EBE70BD0000122D0020445C0040142D0020D8000020FEF7CABAFEF7E9BABA
+:202E400010B5074979441831064C7C44163404E0081D0A68511888470146A142F8D110BD88
+:202E6000080000002800000037E1FFFF302B0000EC0100200000000083E0FFFFEC01000056
+:202E80009401000000000020000000007047FEE7FEE7FEE7FEE77047704770477047FFF760
+:202EA000A7BF000000F009F8002801D0FFF7C8FF0020FFF759FF00F002F80120704700F0E5
+:202EC00001B800000746384600F002F8FBE70000C046C046024A11001820ABBEFBE700BFF7
+:202EE000260002000148804701480047012C0008F52E0008C046C046C046C046FFF7D2FFCB
+:202F0000FFF7C4BFFFF7C3BFFFF7C2BFFFF7C1BFFFF7C0BFFFF7BFBFFFF7BEBFFFF7BDBF05
+:202F2000FFF7BCBFFFF7FEBFFFF7FEBFFFF7FEBFFFF7FEBFFFF7FEBFFFF7FEBFFFF7FEBF3B
+:202F4000FFF7FEBFFFF7FEBFFFF7FEBFFFF7FEBFFFF7FEBFFFF7FEBFFFF7FEBFFFF7FEBFD9
+:202F6000FFF7FEBFFFF7FEBFFFF7FEBFFFF7FEBFFFF7FEBFFFF793BFFFF7FEBFFFF7FEBF24
+:202F8000FFF7FEBFFFF7FEBFFFF7FEBFFFF7FEBFFFF7FEBFFFF7FEBFFFF7FEBFFFF7FEBF99
+:202FA000FFF7FEBFFFF7FEBFFFF7FEBFFFF7FEBFFFF7FEBFFFF7FEBFFFF7FEBFFFF7FEBF79
+:202FC000FFF7FEBFFFF7FEBFFFF7FEBFFFF7FEBFFFF7FEBFFFF7FEBFFFF7FEBFFFF7FEBF59
+:202FE000FFF7FEBFFFF7FEBFFFF7FEBFFFF7FEBFFFF7FEBFFFF7FEBFFFF7FEBFFFF7FEBF39
+:20300000FFF7FEBFFFF7FEBFFFF7FEBFFFF7FEBFFFF7FEBF04FC040404040C0810E000001D
+:20302000407F404040406020180F000004FC8484848484E40C100000407F40000000000394
+:203040000000000004FC04000000000004FC0400001F204040404040201F000000000000AA
+:20306000606000000000000000000000606000000000000000780404040404887800000044
+:20308000006050484442414070000000000000000000000000000000006060000000000001
+:2030A0000000000000E018080404040818E00000000F302040404020300F0000000000087E
+:2030C00008FC00000000000000000040407F4040400000000000000000000000000000002D
+:2030E0000000000000000000000000004D280008772800087D2900087F290008812900089C
+:20310000BF290008032A00080D2A0008132A0008192A00080000000040000000042D000842
+:2031200004000000082D000826000000302D000826000000540100201A000000582D000881
+:2031400010000000612300083D2900086123000861230008612300086329000861230008A1
+:2031600061230008752900081A03530054004D003300320031003000000000000000000046
+:2031800000000000392E000861230008612300086123000861230008612300086123000878
+:2031A000612300083D2E0008612300086123000861230008612300086123000870000000E4
+:2031C0000000000A000000000000000000000000000000080000000002000000D02C0008D7
+:2031E00012000000E42C000820000000000600000000000003010000030000000100000077
+:20320000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFCE
+:20322000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFAE
+:20324000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF8E
+:20326000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF6E
+:20328000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF4E
+:2032A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF2E
+:2032C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF0E
+:2032E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEE
+:20330000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFCD
+:20332000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFAD
+:20334000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF8D
+:20336000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF6D
+:20338000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF4D
+:2033A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF2D
+:2033C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF0D
+:2033E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFED
+:20340000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFCC
+:20342000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFAC
+:20344000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF8C
+:20346000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF6C
+:20348000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF4C
+:2034A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF2C
+:2034C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF0C
+:2034E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEC
+:20350000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFCB
+:20352000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFAB
+:20354000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF8B
+:20356000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF6B
+:20358000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF4B
+:2035A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF2B
+:2035C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF0B
+:2035E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEB
+:20360000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFCA
+:20362000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFAA
+:20364000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF8A
+:20366000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF6A
+:20368000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF4A
+:2036A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF2A
+:2036C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF0A
+:2036E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEA
+:20370000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFC9
+:20372000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFA9
+:20374000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF89
+:20376000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF69
+:20378000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF49
+:2037A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF29
+:2037C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF09
+:2037E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE9
+:20380000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFC8
+:20382000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFA8
+:20384000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF88
+:20386000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF68
+:20388000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF48
+:2038A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF28
+:2038C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF08
+:2038E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE8
+:20390000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFC7
+:20392000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFA7
+:20394000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF87
+:20396000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF67
+:20398000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF47
+:2039A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF27
+:2039C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF07
+:2039E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE7
+:203A0000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFC6
+:203A2000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFA6
+:203A4000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF86
+:203A6000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF66
+:203A8000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF46
+:203AA000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF26
+:203AC000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF06
+:203AE000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE6
+:203B0000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFC5
+:203B2000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFA5
+:203B4000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF85
+:203B6000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF65
+:203B8000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF45
+:203BA000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF25
+:203BC000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF05
+:203BE000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE5
+:203C0000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFC4
+:203C2000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFA4
+:203C4000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF84
+:203C6000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF64
+:203C8000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF44
+:203CA000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF24
+:203CC000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF04
+:203CE000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE4
+:203D0000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFC3
+:203D2000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFA3
+:203D4000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF83
+:203D6000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF63
+:203D8000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF43
+:203DA000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF23
+:203DC000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF03
+:203DE000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE3
+:203E0000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFC2
+:203E2000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFA2
+:203E4000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF82
+:203E6000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF62
+:203E8000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF42
+:203EA000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF22
+:203EC000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF02
+:203EE000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE2
+:203F0000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFC1
+:203F2000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFA1
+:203F4000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF81
+:203F6000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF61
+:203F8000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF41
+:203FA000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF21
+:203FC000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF01
+:203FE000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE1
+:00000001FF

Development Resources/TS80/TS80.ioc

@@ -0,0 +1,348 @@
+#MicroXplorer Configuration settings - do not modify
+ADC1.Channel-31\#ChannelRegularConversion=ADC_CHANNEL_4
+ADC1.Channel-32\#ChannelInjectedConversion=ADC_CHANNEL_2
+ADC1.Channel-33\#ChannelInjectedConversion=ADC_CHANNEL_2
+ADC1.Channel-34\#ChannelInjectedConversion=ADC_CHANNEL_2
+ADC1.Channel-35\#ChannelInjectedConversion=ADC_CHANNEL_2
+ADC1.ContinuousConvMode=DISABLE
+ADC1.DataAlign=ADC_DATAALIGN_RIGHT
+ADC1.DiscontinuousConvMode=DISABLE
+ADC1.EnableAnalogWatchDog=false
+ADC1.EnableRegularConversion=ENABLE
+ADC1.ExternalTrigConv=ADC_SOFTWARE_START
+ADC1.ExternalTrigInjecConv=ADC_INJECTED_SOFTWARE_START
+ADC1.IPParameters=Rank-31\#ChannelRegularConversion,Channel-31\#ChannelRegularConversion,SamplingTime-31\#ChannelRegularConversion,NbrOfConversionFlag,master,Rank-32\#ChannelInjectedConversion,Channel-32\#ChannelInjectedConversion,SamplingTime-32\#ChannelInjectedConversion,InjectedOffset-32\#ChannelInjectedConversion,Rank-33\#ChannelInjectedConversion,Channel-33\#ChannelInjectedConversion,SamplingTime-33\#ChannelInjectedConversion,InjectedOffset-33\#ChannelInjectedConversion,Rank-34\#ChannelInjectedConversion,Channel-34\#ChannelInjectedConversion,SamplingTime-34\#ChannelInjectedConversion,InjectedOffset-34\#ChannelInjectedConversion,Rank-35\#ChannelInjectedConversion,Channel-35\#ChannelInjectedConversion,SamplingTime-35\#ChannelInjectedConversion,InjectedOffset-35\#ChannelInjectedConversion,InjNumberOfConversion,DataAlign,ScanConvMode,ContinuousConvMode,DiscontinuousConvMode,EnableRegularConversion,NbrOfConversion,ExternalTrigConv,ExternalTrigInjecConv,InjectedConvMode,EnableAnalogWatchDog
+ADC1.InjNumberOfConversion=4
+ADC1.InjectedConvMode=None
+ADC1.InjectedOffset-32\#ChannelInjectedConversion=0
+ADC1.InjectedOffset-33\#ChannelInjectedConversion=0
+ADC1.InjectedOffset-34\#ChannelInjectedConversion=0
+ADC1.InjectedOffset-35\#ChannelInjectedConversion=0
+ADC1.NbrOfConversion=1
+ADC1.NbrOfConversionFlag=1
+ADC1.Rank-31\#ChannelRegularConversion=1
+ADC1.Rank-32\#ChannelInjectedConversion=1
+ADC1.Rank-33\#ChannelInjectedConversion=2
+ADC1.Rank-34\#ChannelInjectedConversion=3
+ADC1.Rank-35\#ChannelInjectedConversion=4
+ADC1.SamplingTime-31\#ChannelRegularConversion=ADC_SAMPLETIME_1CYCLE_5
+ADC1.SamplingTime-32\#ChannelInjectedConversion=ADC_SAMPLETIME_1CYCLE_5
+ADC1.SamplingTime-33\#ChannelInjectedConversion=ADC_SAMPLETIME_1CYCLE_5
+ADC1.SamplingTime-34\#ChannelInjectedConversion=ADC_SAMPLETIME_1CYCLE_5
+ADC1.SamplingTime-35\#ChannelInjectedConversion=ADC_SAMPLETIME_1CYCLE_5
+ADC1.ScanConvMode=ADC_SCAN_ENABLE
+ADC1.master=1
+ADC2.Channel-0\#ChannelRegularConversion=ADC_CHANNEL_3
+ADC2.Channel-1\#ChannelInjectedConversion=ADC_CHANNEL_3
+ADC2.Channel-2\#ChannelInjectedConversion=ADC_CHANNEL_3
+ADC2.Channel-3\#ChannelInjectedConversion=ADC_CHANNEL_3
+ADC2.Channel-4\#ChannelInjectedConversion=ADC_CHANNEL_3
+ADC2.ContinuousConvMode=DISABLE
+ADC2.DataAlign=ADC_DATAALIGN_RIGHT
+ADC2.DiscontinuousConvMode=DISABLE
+ADC2.EnableAnalogWatchDog=false
+ADC2.EnableRegularConversion=ENABLE
+ADC2.ExternalTrigConv=ADC_SOFTWARE_START
+ADC2.IPParameters=Rank-0\#ChannelRegularConversion,Channel-0\#ChannelRegularConversion,SamplingTime-0\#ChannelRegularConversion,NbrOfConversionFlag,Rank-1\#ChannelInjectedConversion,Channel-1\#ChannelInjectedConversion,SamplingTime-1\#ChannelInjectedConversion,InjectedOffset-1\#ChannelInjectedConversion,Rank-2\#ChannelInjectedConversion,Channel-2\#ChannelInjectedConversion,SamplingTime-2\#ChannelInjectedConversion,InjectedOffset-2\#ChannelInjectedConversion,Rank-3\#ChannelInjectedConversion,Channel-3\#ChannelInjectedConversion,SamplingTime-3\#ChannelInjectedConversion,InjectedOffset-3\#ChannelInjectedConversion,Rank-4\#ChannelInjectedConversion,Channel-4\#ChannelInjectedConversion,SamplingTime-4\#ChannelInjectedConversion,InjectedOffset-4\#ChannelInjectedConversion,InjNumberOfConversion,DataAlign,ScanConvMode,ContinuousConvMode,DiscontinuousConvMode,EnableRegularConversion,NbrOfConversion,ExternalTrigConv,EnableAnalogWatchDog
+ADC2.InjNumberOfConversion=0
+ADC2.InjectedOffset-1\#ChannelInjectedConversion=0
+ADC2.InjectedOffset-2\#ChannelInjectedConversion=0
+ADC2.InjectedOffset-3\#ChannelInjectedConversion=0
+ADC2.InjectedOffset-4\#ChannelInjectedConversion=0
+ADC2.NbrOfConversion=1
+ADC2.NbrOfConversionFlag=1
+ADC2.Rank-0\#ChannelRegularConversion=1
+ADC2.Rank-1\#ChannelInjectedConversion=1
+ADC2.Rank-2\#ChannelInjectedConversion=2
+ADC2.Rank-3\#ChannelInjectedConversion=3
+ADC2.Rank-4\#ChannelInjectedConversion=4
+ADC2.SamplingTime-0\#ChannelRegularConversion=ADC_SAMPLETIME_1CYCLE_5
+ADC2.SamplingTime-1\#ChannelInjectedConversion=ADC_SAMPLETIME_1CYCLE_5
+ADC2.SamplingTime-2\#ChannelInjectedConversion=ADC_SAMPLETIME_1CYCLE_5
+ADC2.SamplingTime-3\#ChannelInjectedConversion=ADC_SAMPLETIME_1CYCLE_5
+ADC2.SamplingTime-4\#ChannelInjectedConversion=ADC_SAMPLETIME_1CYCLE_5
+ADC2.ScanConvMode=ADC_SCAN_DISABLE
+Dma.I2C1_RX.0.Direction=DMA_PERIPH_TO_MEMORY
+Dma.I2C1_RX.0.Instance=DMA1_Channel7
+Dma.I2C1_RX.0.MemDataAlignment=DMA_MDATAALIGN_BYTE
+Dma.I2C1_RX.0.MemInc=DMA_MINC_ENABLE
+Dma.I2C1_RX.0.Mode=DMA_NORMAL
+Dma.I2C1_RX.0.PeriphDataAlignment=DMA_PDATAALIGN_BYTE
+Dma.I2C1_RX.0.PeriphInc=DMA_PINC_DISABLE
+Dma.I2C1_RX.0.Priority=DMA_PRIORITY_MEDIUM
+Dma.I2C1_RX.0.RequestParameters=Instance,Direction,PeriphInc,MemInc,PeriphDataAlignment,MemDataAlignment,Mode,Priority
+Dma.I2C1_TX.1.Direction=DMA_MEMORY_TO_PERIPH
+Dma.I2C1_TX.1.Instance=DMA1_Channel6
+Dma.I2C1_TX.1.MemDataAlignment=DMA_MDATAALIGN_BYTE
+Dma.I2C1_TX.1.MemInc=DMA_MINC_ENABLE
+Dma.I2C1_TX.1.Mode=DMA_NORMAL
+Dma.I2C1_TX.1.PeriphDataAlignment=DMA_PDATAALIGN_BYTE
+Dma.I2C1_TX.1.PeriphInc=DMA_PINC_DISABLE
+Dma.I2C1_TX.1.Priority=DMA_PRIORITY_MEDIUM
+Dma.I2C1_TX.1.RequestParameters=Instance,Direction,PeriphInc,MemInc,PeriphDataAlignment,MemDataAlignment,Mode,Priority
+Dma.Request0=I2C1_RX
+Dma.Request1=I2C1_TX
+Dma.RequestsNb=2
+FREERTOS.FootprintOK=true
+FREERTOS.INCLUDE_vTaskDelete=0
+FREERTOS.IPParameters=Tasks01,configTICK_RATE_HZ,configMAX_PRIORITIES,configMINIMAL_STACK_SIZE,configTOTAL_HEAP_SIZE,INCLUDE_vTaskDelete,FootprintOK
+FREERTOS.Tasks01=GUITask,0,512,StartGUITask,Default,NULL,Dynamic,NULL,NULL;PIDTask,0,256,StartPIDTask,Default,NULL,Dynamic,NULL,NULL;ROTTask,-2,256,StartRotationTask,Default,NULL,Dynamic,NULL,NULL
+FREERTOS.configMAX_PRIORITIES=4
+FREERTOS.configMINIMAL_STACK_SIZE=256
+FREERTOS.configTICK_RATE_HZ=100
+FREERTOS.configTOTAL_HEAP_SIZE=10240
+File.Version=6
+I2C1.DutyCycle=I2C_DUTYCYCLE_2
+I2C1.I2C_Mode=I2C_Fast
+I2C1.IPParameters=I2C_Mode,DutyCycle
+IWDG.IPParameters=Prescaler
+IWDG.Prescaler=IWDG_PRESCALER_256
+KeepUserPlacement=false
+Mcu.Family=STM32F1
+Mcu.IP0=ADC1
+Mcu.IP1=ADC2
+Mcu.IP10=TIM3
+Mcu.IP2=DMA
+Mcu.IP3=FREERTOS
+Mcu.IP4=I2C1
+Mcu.IP5=IWDG
+Mcu.IP6=NVIC
+Mcu.IP7=RCC
+Mcu.IP8=SYS
+Mcu.IP9=TIM2
+Mcu.IPNb=11
+Mcu.Name=STM32F103T(8-B)Ux
+Mcu.Package=VFQFPN36
+Mcu.Pin0=PA0-WKUP
+Mcu.Pin1=PA2
+Mcu.Pin10=PA11
+Mcu.Pin11=PA12
+Mcu.Pin12=PA13
+Mcu.Pin13=PA14
+Mcu.Pin14=PA15
+Mcu.Pin15=PB3
+Mcu.Pin16=PB4
+Mcu.Pin17=PB5
+Mcu.Pin18=PB6
+Mcu.Pin19=PB7
+Mcu.Pin2=PA3
+Mcu.Pin20=VP_FREERTOS_VS_ENABLE
+Mcu.Pin21=VP_IWDG_VS_IWDG
+Mcu.Pin22=VP_SYS_VS_ND
+Mcu.Pin23=VP_SYS_VS_tim1
+Mcu.Pin24=VP_TIM2_VS_ClockSourceINT
+Mcu.Pin25=VP_TIM2_VS_no_output1
+Mcu.Pin26=VP_TIM2_VS_no_output3
+Mcu.Pin27=VP_TIM3_VS_ClockSourceINT
+Mcu.Pin28=VP_TIM3_VS_no_output4
+Mcu.Pin3=PA4
+Mcu.Pin4=PA6
+Mcu.Pin5=PB0
+Mcu.Pin6=PB1
+Mcu.Pin7=PA8
+Mcu.Pin8=PA9
+Mcu.Pin9=PA10
+Mcu.PinsNb=29
+Mcu.ThirdPartyNb=0
+Mcu.UserConstants=
+Mcu.UserName=STM32F103T8Ux
+MxCube.Version=4.26.0
+MxDb.Version=DB.4.0.260
+NVIC.BusFault_IRQn=true\:0\:0\:false\:false\:true\:false\:true
+NVIC.DMA1_Channel6_IRQn=true\:5\:0\:false\:false\:true\:true\:true
+NVIC.DMA1_Channel7_IRQn=true\:5\:0\:false\:false\:true\:true\:true
+NVIC.DebugMonitor_IRQn=true\:0\:0\:false\:false\:true\:false\:true
+NVIC.HardFault_IRQn=true\:0\:0\:false\:false\:true\:false\:true
+NVIC.I2C1_ER_IRQn=true\:5\:0\:false\:false\:true\:true\:true
+NVIC.I2C1_EV_IRQn=true\:5\:0\:false\:false\:true\:true\:true
+NVIC.MemoryManagement_IRQn=true\:0\:0\:false\:false\:true\:false\:true
+NVIC.NonMaskableInt_IRQn=true\:0\:0\:false\:false\:true\:false\:true
+NVIC.PendSV_IRQn=true\:15\:0\:false\:false\:false\:true\:true
+NVIC.PriorityGroup=NVIC_PRIORITYGROUP_4
+NVIC.SVCall_IRQn=true\:0\:0\:false\:false\:false\:false\:true
+NVIC.SysTick_IRQn=true\:15\:0\:false\:false\:true\:true\:true
+NVIC.TIM1_UP_IRQn=true\:0\:0\:false\:false\:true\:false\:true
+NVIC.TimeBase=TIM1_UP_IRQn
+NVIC.TimeBaseIP=TIM1
+NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:false\:true
+PA0-WKUP.GPIOParameters=GPIO_Label
+PA0-WKUP.GPIO_Label=RM
+PA0-WKUP.Locked=true
+PA0-WKUP.Signal=GPIO_Output
+PA10.GPIOParameters=GPIO_Label
+PA10.GPIO_Label=QC_DM_11K
+PA10.Locked=true
+PA10.Signal=GPIO_Output
+PA11.GPIOParameters=GPIO_Label
+PA11.GPIO_Label=USB_DM
+PA11.Locked=true
+PA11.Signal=GPIO_Analog
+PA12.GPIOParameters=GPIO_Label
+PA12.GPIO_Label=USB_DP
+PA12.Locked=true
+PA12.Signal=GPIO_Analog
+PA13.GPIOParameters=GPIO_Label
+PA13.GPIO_Label=QC_DP_SENSE
+PA13.Locked=true
+PA13.Signal=GPIO_Input
+PA14.GPIOParameters=GPIO_Label
+PA14.GPIO_Label=QC_DM_SENSE
+PA14.Locked=true
+PA14.Signal=GPIO_Input
+PA15.GPIOParameters=GPIO_Label
+PA15.GPIO_Label=OLED_RESET
+PA15.Locked=true
+PA15.Signal=GPIO_Output
+PA2.GPIOParameters=GPIO_Label
+PA2.GPIO_Label=ADC_VIN
+PA2.Locked=true
+PA2.Signal=ADCx_IN2
+PA3.GPIOParameters=GPIO_Label
+PA3.GPIO_Label=ADC_TIP
+PA3.Locked=true
+PA3.Signal=ADCx_IN3
+PA4.GPIOParameters=GPIO_Label
+PA4.GPIO_Label=ADC_TMP36
+PA4.Locked=true
+PA4.Signal=ADCx_IN4
+PA6.GPIOParameters=GPIO_Label
+PA6.GPIO_Label=PWM Out
+PA6.Locked=true
+PA6.Signal=S_TIM3_CH1
+PA8.GPIOParameters=GPIO_Label
+PA8.GPIO_Label=QC_DM_3K
+PA8.Locked=true
+PA8.Signal=GPIO_Output
+PA9.GPIOParameters=GPIO_Label
+PA9.GPIO_Label=MODEL_SEL
+PA9.Locked=true
+PA9.Signal=GPIO_Input
+PB0.GPIOParameters=GPIO_Label
+PB0.GPIO_Label=KEY_A
+PB0.Locked=true
+PB0.Signal=GPIO_Input
+PB1.GPIOParameters=GPIO_Label
+PB1.GPIO_Label=KEY_B
+PB1.Locked=true
+PB1.Signal=GPIO_Input
+PB3.GPIOParameters=GPIO_Label
+PB3.GPIO_Label=QC_DP_3K
+PB3.Locked=true
+PB3.Signal=GPIO_Output
+PB4.GPIOParameters=GPIO_Label
+PB4.GPIO_Label=IMU_INT2
+PB4.Locked=true
+PB4.Signal=GPXTI4
+PB5.GPIOParameters=GPIO_Label
+PB5.GPIO_Label=IMU_INT1
+PB5.Locked=true
+PB5.Signal=GPXTI5
+PB6.GPIOParameters=GPIO_Label
+PB6.GPIO_Label=SCL
+PB6.Mode=I2C
+PB6.Signal=I2C1_SCL
+PB7.GPIOParameters=GPIO_Label
+PB7.GPIO_Label=SDA
+PB7.Mode=I2C
+PB7.Signal=I2C1_SDA
+PCC.Checker=false
+PCC.Line=STM32F103
+PCC.MCU=STM32F103T(8-B)Ux
+PCC.PartNumber=STM32F103T8Ux
+PCC.Seq0=0
+PCC.Series=STM32F1
+PCC.Temperature=25
+PCC.Vdd=3.3
+PinOutPanel.RotationAngle=0
+ProjectManager.AskForMigrate=true
+ProjectManager.BackupPrevious=false
+ProjectManager.CompilerOptimize=3
+ProjectManager.ComputerToolchain=false
+ProjectManager.CoupleFile=false
+ProjectManager.CustomerFirmwarePackage=
+ProjectManager.DefaultFWLocation=true
+ProjectManager.DeletePrevious=true
+ProjectManager.DeviceId=STM32F103T8Ux
+ProjectManager.FirmwarePackage=STM32Cube FW_F1 V1.6.1
+ProjectManager.FreePins=true
+ProjectManager.HalAssertFull=false
+ProjectManager.HeapSize=0x200
+ProjectManager.KeepUserCode=true
+ProjectManager.LastFirmware=true
+ProjectManager.LibraryCopy=1
+ProjectManager.MainLocation=Src
+ProjectManager.PreviousToolchain=SW4STM32
+ProjectManager.ProjectBuild=false
+ProjectManager.ProjectFileName=TS80.ioc
+ProjectManager.ProjectName=TS80
+ProjectManager.StackSize=0x400
+ProjectManager.TargetToolchain=SW4STM32
+ProjectManager.ToolChainLocation=
+ProjectManager.UnderRoot=false
+ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-HAL-true,2-MX_DMA_Init-DMA-false-HAL-true,3-MX_I2C1_Init-I2C1-false-HAL-true,4-SystemClock_Config-RCC-false-HAL-true,5-MX_TIM3_Init-TIM3-false-HAL-true,6-MX_IWDG_Init-IWDG-false-HAL-true,7-MX_TIM2_Init-TIM2-false-HAL-true,8-MX_ADC1_Init-ADC1-false-HAL-true,9-MX_ADC2_Init-ADC2-false-HAL-true
+RCC.ADCFreqValue=8000000
+RCC.ADCPresc=RCC_ADCPCLK2_DIV8
+RCC.AHBFreq_Value=64000000
+RCC.APB1CLKDivider=RCC_HCLK_DIV16
+RCC.APB1Freq_Value=4000000
+RCC.APB1TimFreq_Value=8000000
+RCC.APB2Freq_Value=64000000
+RCC.APB2TimFreq_Value=64000000
+RCC.FCLKCortexFreq_Value=64000000
+RCC.FamilyName=M
+RCC.HCLKFreq_Value=64000000
+RCC.IPParameters=ADCFreqValue,ADCPresc,AHBFreq_Value,APB1CLKDivider,APB1Freq_Value,APB1TimFreq_Value,APB2Freq_Value,APB2TimFreq_Value,FCLKCortexFreq_Value,FamilyName,HCLKFreq_Value,MCOFreq_Value,PLLCLKFreq_Value,PLLMCOFreq_Value,PLLMUL,PLLSourceVirtual,SYSCLKFreq_VALUE,SYSCLKSource,TimSysFreq_Value,USBFreq_Value,USBPrescaler
+RCC.MCOFreq_Value=64000000
+RCC.PLLCLKFreq_Value=64000000
+RCC.PLLMCOFreq_Value=32000000
+RCC.PLLMUL=RCC_PLL_MUL16
+RCC.PLLSourceVirtual=RCC_PLLSOURCE_HSI_DIV2
+RCC.SYSCLKFreq_VALUE=64000000
+RCC.SYSCLKSource=RCC_SYSCLKSOURCE_PLLCLK
+RCC.TimSysFreq_Value=64000000
+RCC.USBFreq_Value=42666666.666666664
+RCC.USBPrescaler=RCC_USBCLKSOURCE_PLL_DIV1_5
+SH.ADCx_IN2.0=ADC1_IN2,IN2
+SH.ADCx_IN2.ConfNb=1
+SH.ADCx_IN3.0=ADC1_IN3,IN3
+SH.ADCx_IN3.1=ADC2_IN3,IN3
+SH.ADCx_IN3.ConfNb=2
+SH.ADCx_IN4.0=ADC1_IN4,IN4
+SH.ADCx_IN4.ConfNb=1
+SH.GPXTI4.0=GPIO_EXTI4
+SH.GPXTI4.ConfNb=1
+SH.GPXTI5.0=GPIO_EXTI5
+SH.GPXTI5.ConfNb=1
+SH.S_TIM3_CH1.0=TIM3_CH1,PWM Generation1 CH1
+SH.S_TIM3_CH1.ConfNb=1
+TIM2.Channel-PWM\ Generation1\ No\ Output=TIM_CHANNEL_1
+TIM2.Channel-PWM\ Generation3\ No\ Output=TIM_CHANNEL_3
+TIM2.IPParameters=Channel-PWM Generation1 No Output,Channel-PWM Generation3 No Output
+TIM3.Channel-Output\ Compare4\ No\ Output=TIM_CHANNEL_4
+TIM3.Channel-PWM\ Generation1\ CH1=TIM_CHANNEL_1
+TIM3.ClockDivision=TIM_CLOCKDIVISION_DIV4
+TIM3.IPParameters=Channel-PWM Generation1 CH1,OCFastMode_PWM-PWM Generation1 CH1,ClockDivision,Prescaler,Period,Channel-Output Compare4 No Output,OCMode_4,Pulse-Output Compare4 No Output
+TIM3.OCFastMode_PWM-PWM\ Generation1\ CH1=TIM_OCFAST_ENABLE
+TIM3.OCMode_4=TIM_OCMODE_ACTIVE
+TIM3.Period=65535
+TIM3.Prescaler=2000
+TIM3.Pulse-Output\ Compare4\ No\ Output=65000
+VP_FREERTOS_VS_ENABLE.Mode=Enabled
+VP_FREERTOS_VS_ENABLE.Signal=FREERTOS_VS_ENABLE
+VP_IWDG_VS_IWDG.Mode=IWDG_Activate
+VP_IWDG_VS_IWDG.Signal=IWDG_VS_IWDG
+VP_SYS_VS_ND.Mode=No_Debug
+VP_SYS_VS_ND.Signal=SYS_VS_ND
+VP_SYS_VS_tim1.Mode=TIM1
+VP_SYS_VS_tim1.Signal=SYS_VS_tim1
+VP_TIM2_VS_ClockSourceINT.Mode=Internal
+VP_TIM2_VS_ClockSourceINT.Signal=TIM2_VS_ClockSourceINT
+VP_TIM2_VS_no_output1.Mode=PWM Generation1 No Output
+VP_TIM2_VS_no_output1.Signal=TIM2_VS_no_output1
+VP_TIM2_VS_no_output3.Mode=PWM Generation3 No Output
+VP_TIM2_VS_no_output3.Signal=TIM2_VS_no_output3
+VP_TIM3_VS_ClockSourceINT.Mode=Internal
+VP_TIM3_VS_ClockSourceINT.Signal=TIM3_VS_ClockSourceINT
+VP_TIM3_VS_no_output4.Mode=Output Compare4 No Output
+VP_TIM3_VS_no_output4.Signal=TIM3_VS_no_output4
+board=TS100

Dockerfile

@@ -0,0 +1,19 @@
+FROM alpine:3.15
+LABEL maintainer="Ben V. Brown <ralim@ralimtek.com>"
+
+WORKDIR /build
+# Installing the two compilers, python3, python3 pip, clang format
+# Compilders ->gcc-* newlib-*
+# Python3 -> py*
+# Misc -> findutils make git
+# musl-dev is required for the multi lang firmwares
+# clang is required for clang-format (for dev)
+
+RUN apk add --no-cache gcc-riscv-none-elf gcc-arm-none-eabi newlib-riscv-none-elf newlib-arm-none-eabi findutils python3 py3-pip make git musl-dev clang bash clang-extra-tools
+
+# Install Python3 packages
+
+RUN python3 -m pip install bdflib black
+
+COPY . /build/source
+COPY ./ci /build/ci

Documentation/DebugMenu.md

@@ -0,0 +1,98 @@
+# Debugging Menu
+
+In this firmware there is extra debugging information hidden under an extra menu.
+This is accessed by holding the rear (-/B) button on the iron while it is on the home screen.
+
+This menu is meant to be simple, so it has no fancy GUI animations.
+
+To move through the menu use the front (+/A) button.
+To exit, use the rear (-/B) button again.
+
+## Menu items
+
+Items are shown in the menu on a single line, so they use short codes
+
+### HW G
+
+This indicates the high water mark for the stack for the GUI thread. The smaller this number is, the less headroom we have in the stack.
+As this is a high-water mater, you should only trust this once you have walked through all GUI options to "hit" the worst one.
+
+### HW M
+
+This indicates the high water mark for the stack for the movement detection thread. The smaller this number is, the less headroom we have in the stack.
+
+### HW P
+
+This indicates the high water mark for the stack for the PID thread. The smaller this number is, the less headroom we have in the stack.
+
+### Time
+
+This just shows how many deciseconds the unit has been powered for.
+
+### Move
+
+This is the last timestamp of movement. When the iron is moved this should update to match the time field (one before in the menu).
+This can be used for checking performance of the movement dection code.
+
+### RTip
+
+This is the raw tip reading in μV. This can be used when assessing the calibration routines for example.
+
+### CTip
+
+This is the tip temperature in degrees Celsius.
+This can be used with RTip for assessing temperature processing performance.
+
+### CHan
+
+This is the handle temperature in °C. This is used for cold junction compensation of the tip temperature.
+This is shown in degrees Celsius x10, so 200 == 20.0 °C
+
+### Vin
+
+The input voltage as read by the internal ADC. Can be used to sanity check its being read correctly.
+
+### ACC
+
+This indicates the accelerometer that is fitted inside the unit.
+
+- MMA8652
+- LIS2DH12
+- BMA223
+- MSA301
+- SC7A20
+- None detected -> running in fallback without movement detection
+- Scanning -> Still searching I2C for one
+
+### PWR
+
+This indicates the current power source for the iron.
+This may change during power up as the sources are negotiated in turn.
+
+- **DC** input (dumb)
+- **QC** input (We used QC2/3 negotiation for current supply)
+- **PD W. VBus** input (We used the PD subsystem to negotiate for the current supply); and VBus is connected to your input power source
+- **PD No VBus** input (We used the PD subsystem to negotiate for the current supply); and VBus is **NOT** connected to your input power source
+- If you successfully modified the Pinecil to support 24 V by cutting the trace line to Vbus, then 'PD No VBus' displays on screen.
+- Connect to any PD USB power to check Vbus status. It will not show any PD message when Pinecil is powered by DC port, QC, or USB 5 V (non PD).
+
+### Max
+
+This indicates the max temperature in degrees Celsius that the system estimates it can measure the tip reliably to.
+This is dependant on a few factors including the handle temperature so it can move around during use.
+
+### Hall
+
+This appears if your device is capable of having a magnetic hall effect sensor installed (Pinecil).
+This shows the current field strength reading from the sensor. It can be used to check if the sensor is operational, and measure how strong the magnetic field is for diagnostics and optimal placement of magnets on a stand.
+
+# PD Debug menu
+
+On the Pinecil; if the iron is booted up while holding the front button (+); it will show an extra menu for inspecting USB-PD power adapters.
+
+The menu navigates like the debug menu, where pressing (+) cycles through elements, and (-) will exit the menu.
+
+First page shows the PD negotiation stage number; which can be used for diagnosing if PD is not working.
+After a few seconds or after PD negotiates (state above 5) it will show "No VBus" if the VBus mod is performed or "VBus" if the mod has not been done.
+
+Once negotiation is complete; the other screens will show the advertised readings for voltage and current of the proposals.

Documentation/Development.md

@@ -0,0 +1,104 @@
+# Development
+
+Building this software can be performed two ways: using the STM32CubeIDE or using command line tools.
+
+## STM32CubeIDE
+
+The easiest way to start working with the STM32CubeIDE is to create a new project for the STM32F103RCTx.
+Once this is created, remove the auto-generated source code.
+Next, drag the contents of the `source` folder into the project and choose to link to files.
+You will need to update the build settings for include paths and point to the new `.ld` linker file.
+
+## Command line tools and building a release
+
+In the `source` folder there is a `Makefile` that can be used to build the repository using command line tools.
+When running the `make` command, specify which model of the device and the language(s) you would like to use.
+
+### macOS
+
+Use the following steps to set up a build environment for IronOS on the command line (in Terminal).
+
+1. [Follow steps 1 – 3 here to install the toolchain](https://github.com/glegrain/STM32-with-macOS#0---installing-the-toolchain) needed to compile for STM32 microcontrollers.
+2. Install `python`:
+
+```
+brew install python
+```
+
+3. (Optional) Update `pip` so it doesn't warn you about being out-of-date:
+
+```
+python3 -m pip install --upgrade pip
+```
+
+4. Change to the `source` directory:
+
+```
+cd source
+```
+
+5. Create a Python virtual environment for IronOS named `ironos-venv` to keep your Python installation clean:
+
+```
+python3 -m venv ironos-venv
+```
+
+6. Activate the Python virtual environment:
+
+```
+source ironos-venv/bin/activate
+```
+
+7. Install the dependencies required to run `make-translation.py`:
+
+```
+pip install bdflib
+```
+
+8. All done! See some examples below for how you can build your own IronOS.
+
+### Examples
+
+To build a single language Simplified Chinese firmware for the TS80P with 8 simultaneous jobs:
+
+```
+make -j8 model=TS80P firmware-ZH_CN
+```
+
+To build a European multi-language firmware for the Pinecil with as many simultaneous jobs as there are logical processors on Linux:
+
+```
+make -j$(nproc) model=Pinecil firmware-multi_European
+```
+
+To build a Cyrillic compressed multi-language firmware for the Pinecil with as many simultaneous jobs as there are logical processors on macOS:
+
+```
+make -j$(sysctl -n hw.logicalcpu) model=Pinecil firmware-multi_compressed_Bulgarian+Russian+Serbian+Ukrainian
+```
+
+To build a custom multi-language firmware including English and Simplified Chinese for the TS80:
+
+```
+make -j8 model=TS80 custom_multi_langs="EN ZH_CN" firmware-multi_Custom
+```
+
+To build a custom compressed multi-language firmware including German, Spanish, and French for the TS100 (note if `model` is unspecified, it will default to `TS100`):
+
+```
+make -j8 custom_multi_langs="DE ES FR" firmware-multi_compressed_Custom
+```
+
+To build a release instead, run the `build.sh` script. This will update translations and also build every language for all device models. For macOS users, replace `make -j$(nproc)` in the script with `make -j$(sysctl -n hw.logicalcpu)` before running.
+
+## Updating languages
+
+To update the language translation files and their associated font maps, execute the `make_translation.py` code from the `Translations` directory.
+If you edit the translation definitions or the english translation, please also run `gen_menu_docs.py` to update the settings menu documentation automatically.
+
+## Building Pinecil
+
+I highly recommend using the command line tools and using Docker to run the compiler.
+It's a bit more fussy on setup than the STM tooling, and this is by far the easiest way.
+If you _need_ an IDE I have used [Nuclei's IDE](https://nucleisys.com/download.php).
+Follow the same idea as the STM Cube IDE notes above.

Documentation/Flashing.md

@@ -0,0 +1,232 @@
+# Flashing / Upgrading your iron
+
+## Downloading source file
+
+In the development of this firmware, there are three _types_ of firmware released.
+These are the "Main" stable releases, which generally have high confidence in being bug free.
+Release candidates are released slightly more often, and these are generally perfectly fine for everyday use. These are released early to allow for translation checking and for wonderful people to help spot bugs and regressions.
+Finally, there are the "mainline" builds, which are built from the main git branch.
+These are built on every change and can be found on the Actions tab (see below).
+
+### Main release
+
+Main releases are made to the [releases page](https://github.com/Ralim/IronOS/releases).
+Download the zip file that matches your model of soldering iron, and extract it.
+Select the appropriate file type for your unit, in general Miniware devices need `.hex` and Pinecil needs `.dfu`.
+Flash according to details below
+
+### Bleeding edge / latest
+
+For the _latest_ code, you will need to download the zip file from the artifacts page on the build for what you want.
+Head to the [Actions](https://github.com/Ralim/IronOS/actions) page and then select the run for the appropriate branch you would like.
+In general you probably want `master`.
+
+Once you click on a run, scroll down to the "Artifacts" section and then click on your model to download a zip file.
+Then this works the same as a production release (use the correct file).
+
+# Miniware devices (TS100, TS80, TS80P & MHP30)
+
+This is completely safe, but if it goes wrong just put the `.hex` file from the official website ([TS100](https://www.minidso.com/forum.php?mod=viewthread&tid=868&extra=page%3D1), [TS80](https://www.minidso.com/forum.php?mod=viewthread&tid=3202&extra=page%3D1), [TS80P](https://www.minidso.com/forum.php?mod=viewthread&tid=4070&extra=page%3D1) & [MHP30](https://www.minidso.com/forum.php?mod=viewthread&tid=4385&extra=page%3D1)) onto the unit and you're back to the old firmware. Downloads for the `.hex` files to flash are available on the [releases page.](https://github.com/Ralim/IronOS/releases) The file you want is called _(MODEL)\_EN.hex_ unless you want the translations, they are (MODEL)\__language short name_.hex. Where (MODEL) is either TS100 or TS80.
+
+Officially the bootloader on the devices only works under Windows (use the built-in File Explorer, as alternative file managers or copy handlers like Teracopy will fail). However, users have reported that it does work under Mac, and can be made to work under Linux _sometimes_. Details over on the [wiki page](https://github.com/Ralim/ts100/wiki/Upgrading-Firmware).
+
+1. Hold the button closest to the tip (MHP30 the left button on the back), and plug in the USB to the computer.
+2. The unit will appear as a USB drive. ( Screen will say `DFU` on it.)
+3. Drag the `.hex` file onto the USB drive.
+4. The unit will disconnect and reconnect.
+5. The filename will have changed to end in *.RDY* or *.ERR*
+6. If it ends with *.RDY* you're done! Otherwise, something went wrong.
+7. If it didn't work the first time, try copying the file again without disconnecting the device, often it will work on the second shot.
+8. Disconnect the USB and power up the device. You're good to go.
+
+For the more adventurous out there, you can also load this firmware onto the device using an SWD programmer.
+
+On the bottom of the MCU riser PCB, there are 4 pads for programming. On v2.51A PCB revision `USB_D+` is shorted to `SWDIO` and `USB_D-` is shorted to `SWCLK` so debugging works without disassembly (attach while staying in the bootloader). Installing [dapboot from eDesignOSS](https://github.com/eDesignOSS/dapboot) (`make TARGET=TS100 -C src`) is recommended as it allows reliable flashing of binary files with [dfu-util](http://dfu-util.sourceforge.net/).
+
+There is a complete device flash backup included in this repository. (Note this includes the bootloader, so will need an SWD programmer to load onto the unit).
+
+For the TS80 the SWD pins are used for the QC negotiation, so you can actually connect to the SWD power via the USB connector.
+
+## Mac
+
+sgr1ff1n (Shane) commented in [issue 11](https://github.com/Ralim/ts100/issues/11) that upgrading worked on their Mac as per normal:
+
+> I just wanted to say that I was able to update the firmware on my ts100 from the stock version to 1.08 found in this repository using my Mac. I simply followed the same steps however through Finder. I have a MacBook Pro (13-inch, Mid 2012) running Sierra 10.12.4 (16E195).
+
+## Linux
+
+While in the past there were reports of unreliable upgrades, the consensus in [issue 11](https://github.com/Ralim/ts100/issues/11) is that things work mostly as expected in Linux.
+
+@awigen has contributed a script [flash_ts100_linux.sh](https://raw.githubusercontent.com/Ralim/ts100/master/Flashing/flash_ts100_linux.sh) that works on Ubuntu 16.04 as well as other distros.
+
+If you want to do it manually (or if the script does not work for some reason) the general procedure is the same as for Windows, the differences are in the way to mount the unit and copy the firmware.
+Remember that after flashing, the firmware filename will have changed to end in `.RDY` or `.ERR` or `.NOT` and only `.RDY` means the flashing was successful!
+
+- The unit has to be mounted as `msdos` type (thanks @balrog-kun for having spotted it). You may disable automount, but unmounting the automounted drive and remounting as `msdos` works fine. You do not need to turn off automounting, but you do need to unmount the device with `umount`.
+- It is recommended to use an all-caps filename for the firmware, even if successful flashing were done with lower case names.
+- Avoid USB hubs, plug directly in your computer.
+- If it fails, try again several times without unplugging. Just let it remount.
+
+Example, to be run as root, once the unit has been plugged in DFU mode and auto-mounted:
+
+```bash
+FW=ts100.hex
+unset NAME
+eval $(lsblk -P -p -d --output NAME,MODEL|grep "DFU[ _]Disk")
+[ -z ${NAME+x} ] && exit 1  # Could not find DFU device
+umount "$NAME"
+mkdir /tmp/mntdfu
+mount -t msdos "$NAME" /tmp/mntdfu
+cp "$FW" "/tmp/mntdfu/$(basename $FW|tr a-z A-Z)"
+sync
+umount /tmp/mntdfu
+rmdir /tmp/mntdfu
+```
+
+Device will reboot and automount will rerun if not disabled.
+Check the extension of your firmware, it should be `.RDY` now.
+
+
+# Pinecil (Pine64)
+
+- The MCU used in Pinecil supports usb-dfu. Reference [Pinecil Wiki](https://wiki.pine64.org/wiki/Pinecil).
+- Recommended Updater: the [Pine64 Updater](https://github.com/pine64/pinecil-firmware-updater/releases), is an easy-to-use GUI app. It is fast and works in several types of OS, i.e. Windows/Mac. It will automatically fetch the newest stable version of IronOS from Github.
+- Troubleshooting: if you have issues using the Pine64 Updater or your install fails, please go to troubleshooting tips below.
+- Community chat: if troubleshooting doesn't work, then join the Pine64 > Pinecil channel. There are knowledgeable members in Discord/Telegram/Matrix. Discord has a bridge bot connection to Telegram and Matrix so that all pine volunteers/members can see advice for Pinecil and related items or just get tips on which Power supply to purchase.
+- One advantage of Pinecil is that you can not permanently damage it doing a firmware update (because DFU is in ROM); an update could render Pinecil temporarily inoperable if you flash an invalid firmware. But no worries, simply re-flashing with a working firmware copy will fix everything.
+- USB-C cable is required to do an update. Generally, all USB controllers work, but some hubs have issues so it is preferred to avoid USB hubs for updates.
+- Alternate Update Methods: if your OS is not currently supported by the [Updater](https://github.com/pine64/pinecil-firmware-updater/releases) or it does not meet your needs, i.e., you want to install a beta version, the below manual methods may be used. 
+
+## Linux and Mac
+
+### Steps
+
+⛔  Do not use the DC power jack while updating firmware or you may destroy your PC. ⛔
+
+1. Download and extract the firmware package from Github [IronOS Releases](https://github.com/Ralim/IronOS/releases).
+2. Highly recommend updating `dfu-util` to the newest version.
+3. Enter DFU mode: press and hold (-) button at the back of the iron (do not release).
+4. Connect USB to PC, and USB-C to back of Pinecil, keep holding (-) button down.
+5. The screen will stay **black/off** to indicate the Pinecil is in DFU mode. This is normal.
+6. Once the USB cable is connected at two ends, wait 10 seconds more, then release the (-) button.
+7. Using `dfu-util` you can flash the firmware using a command line like this:
+
+```
+dfu-util -D Pinecil_EN.dfu
+```
+
+Choose the file name from the folder with the appropriate 2-letter country code for your chosen language (i.e, EN = English).
+
+### Troubleshooting:
+- If you get a message stating that `More than one DFU capable USB device found!` when running the above command you probably have an old version of `dfu-util` installed. Might be worth updating. You can still install on the old version, but you will have to specify which DFU interface to flash to. Running the command `dfu-util -l` will show you if there are several DFU devices detected. Example:
+```
+Found DFU: [28e9:0189] ver=0100, devnum=48, cfg=1, intf=0, path="1-1", alt=1, name="@Option Bytes  /0x1FFFF800/01*016Be", serial="??"
+Found DFU: [28e9:0189] ver=0100, devnum=48, cfg=1, intf=0, path="1-1", alt=0, name="@Internal Flash  /0x08000000/128*001Kg", serial="??"
+```
+In this example we see that more than one part of the Pinecil is detected as a DFU interface and we need to specify which one we want to flash to. We want the `Internal Flash` so in this case we can use `alt=0` to identify which interface to target. The command would then look like this:
+```
+dfu-util -D Pinecil_EN.dfu -a 0
+```
+- Note: if you use an older release of `dfu-util` and do not see `alt=0, name="@Internal Flash  /0x08000000/128*001Kg"` when running `dfu-util -l` you likely will not be able to update without first updating 'dfu-util'.
+- If your update is crashing part-way into the update, there is sometimes an issue with older/fussy USB controllers (they can show up/disappear/then show up again)
+    - Try a direct connection to the USB port, do not use a USB hub, and use shorter cable. If possible pick a port connected to the main board.
+    - Switch to a different PC/Laptop and use different ports. USB-C ports are recommended but some have also reported having a fussy C port.
+    - Hold down the (-) button for the entire firmware update, do not release until near the end.
+- `DC Low` message: a pc/laptop can not fully power pinecil, it generally can only get 5 V (non-PD) to communicate for firmware updates and Pinecil will report 'DC Low'. This is normal.
+
+
+## Windows
+
+Two Options for Windows
+
+### Option 1: use command line
+
+### Steps
+
+⛔  Do not use the DC power jack while updating firmware or you may destroy your PC. ⛔
+
+1. Using command line `dfu-util` is similar to above for Linux / Mac.
+2. Highly recommend updating `dfu-util` to the newest version.
+3. Download and extract the firmware package from Github [IronOS Releases](https://github.com/Ralim/IronOS/releases).
+4. Enter DFU mode: press and hold (-) button at the back of the iron (do not release).
+5. Connect USB to PC, and USB-C to the back of Pinecil, keep holding (-) button down.
+6. Screen will stay **black/off** to indicate the Pinecil is in DFU mode. This is normal.
+7. After the USB cable is connected at both ends, wait ~10 seconds more, then release the (-) button.
+8. Open PowerShell or Command window.
+9. Change to the directory of the unzipped firmware files
+10. Using `dfu-util,`  flash the firmware using a command like this:
+
+```
+dfu-util -D Pinecil_EN.dfu
+```
+  - If you have errors, see Troubleshooting [above](/Documentation/Flashing.md#troubleshooting).
+
+
+### Option 2: use the gui tool from chip vendor
+
+### Steps
+
+⛔  Do not use the DC power jack while updating firmware or you may destroy your PC. ⛔
+
+1. If you are uncomfortable with the command line, then this chip vendor supplied gui tool/drivers is an option.
+2. Download and extract the firmware package from Github [IronOS Releases](https://github.com/Ralim/IronOS/releases).
+3. Download both the `GD32 MCU DFU TOOL` and the `GD32 Dfu Drivers`.
+   - GD32 DFU Tool [here](http://www.gd32mcu.com/en/download?kw=GD32+MCU+Dfu+Tool&lan=en). If the link breaks, search for "GD32 MCU Dfu Tool" at this [link](http://www.gd32mcu.com/en/download/).
+   - GD32 DFU Drivers [here](http://www.gd32mcu.com/en/download?kw=GD32+Dfu+Drivers&lan=en). If the link breaks, search for "GD32 Dfu Drivers" at this [link](http://www.gd32mcu.com/en/download/).
+   - Check properties of both downloads, tick Unblock if needed, then Unzip
+4. Install the drivers and the GD32 DFU tool (ignore prompts to update the tool).
+5. Enter DFU mode: press and hold (-) button at the back of Pinecil (do not release).
+6. Connect Pinecil to a PC via USB cable (do not release the (-) yet).
+7. Screen will stay **black/off** to indicate the Pinecil is in DFU mode. This is normal.
+8. You may hear a beep from Windows as it connects to Pinecil in DFU mode.
+9. If you see windows notification that it `does not recognize Usb device`, then you didn't connect, repeat step 3-8.
+10. Open the GD32 DFU Tool (ignore prompts to update tool).
+11. At the top of the DFU tool, you should see `GD DFU DEVICE 1` appear if you successfully connected Pinecil.
+12. If DFU Device box at top is blank, then Pinecil is not connected in DFU mode, repeat steps 3-11.
+13. If it has been more than 10 seconds since you connected the USB cable, Release the (-) button. (don't use Upload from Device section)
+14. Select `Download to device` > Open > Browse to folder dyou unziped in step 2.  
+15. Select the `hex` file for language. English is  Pinecil_EN.hex , tick `Verify after download`.
+16. Click `OK` at bottom. After a few minutes you will see 0-100%,  Download successfully!  Click `Leave DFU` at the top. 
+17. Disconnect pinecil cable from PC, plug it into a power supply.
+18. Do not need to press any buttons, a new screen should appear.
+19. To confirm upgrade, hold the minus (-) button down for a few seconds, it then shows new firmware version v2.xx.x....date
+
+ - If you have errors, see Troubleshooting [above](/Documentation/Flashing.md#troubleshooting).
+ 
+
+
+## FAQ
+
+#### [Miniware] The file is showing up with the extension `.ERR`
+
+This can occur during the programming process if any of the checks in the bootloader fail. This is often triggered by anti-virus software or using a non-Windows host OS.
+
+First, try just copying the file a second time.
+
+1. Attach the iron in DFU mode.
+2. Copy the `.hex` file to the device.
+3. The device disconnects and connects with the `.ERR` file.
+4. Copy the same `.hex` file again **⛔ DO NOT TRY AND DELETE THE OLD ONE ⛔**.
+5. The device will disconnect and reconnect again.
+6. The device _should_ now have the `.RDY` file.
+7. You're done.
+
+If this fails and you are on Mac or Linux reading the wiki page about programming can help. There is also a very long issue thread going through all of the different attempts around this too.
+
+If you are on Windows, it's often best to try another computer (friends, work, partners etc).
+
+#### [Miniware] Device randomly disconnects or does not show up in DFU mode
+
+1. Check if the USB cable you are using has the data pins; test it on another device. There are a surprisingly large number of usb-micro cables that are power _only_.
+
+2. Try other USB ports. Often different USB controllers will interact with the units differently due to design quirks in the miniware design.
+
+### [Miniware] Alternative bootloader
+
+If you are an advanced user, and you have used `usb-dfu` tools before, or you would like to learn; there is an alternative bootloader for these irons.
+This will **NOT** show up as a USB storage drive, but instead show up using a standard DFU protocol device. You can then use dfu tools or GUI's to upgrade the iron using the `.bin` files that are posted to the releases page.
+
+To change to dapboot based alternative bootloader, you need to flash the hex file from [here](https://github.com/eDesignOSS/ts100-bl-flasher/releases).
+`ts100-stockbl.hex` will reflash the stock bootloader, `ts100-dapboot.hex` will flash the new dapboot based usb bootloader.
+
+Note that this is only recommended for users who know what they are doing. If you don't understand how this works, please don't flash this.

Documentation/GettingStarted.md

@@ -0,0 +1,87 @@
+# Getting Started
+
+Getting started with IronOS on your Pinecil/TS80/TS80P/TS100.
+If your device did not come with IronOS already installed, or if you need to update to the latest version; please see the [Flashing Guide](/Documentation/Flashing.md). It is recommended to update to the newest stable release.
+
+Once your Iron has been flashed, on first power on it _may_ warn you about the system settings being reset.
+_Do not panic_; this is 100% completely normal. This is here to note to you that they have been reset to handle the internal structure changing.
+
+If you receive a warning about the accelerometer or USB-PD not being detected, please see [here](/Documentation/HardwareIssues.md).
+
+## The Home screen (or idle screen)
+
+This is the landing page of the firmware, from here you can choose to either go into the [settings menu](#Settings-Menu) or go into [soldering mode](#Soldering-Mode).
+
+By default this will show a screen similar to the one below:
+
+![Home Screen](/Documentation/images/HomeScreen.png)
+
+Note that this may be drawn mirrored depending on the orientation of your screen.
+
+The soldering iron symbol on the screen will appear near the tip. This is here to indicate that pressing the button closest to the front of the iron will enter soldering mode.
+
+And naturally, the spanner like icon represents that pressing the button near the rear of the soldering iron will enter the settings menu.
+
+In the settings, you can turn on an advanced idle screen instead. The buttons still function the same, however, the image will be swapped for a text telling you the current status of the iron with extra details.
+
+Depending on how your device is being powered, at one end of the screen, the firmware will either draw text to show you the current-voltage your unit is being provided with, a battery icon (if battery mode is enabled) or a power plug icon.
+
+If you see exclamation marks (!!!) where the soldering iron should be, this indicates that the firmware can't see the tip connected. This could indicate a problem with the iron or tip if there is one inserted. First, try removing and reinstalling the tip. If the issue persists please see the [hardware issues section](/Documentation/HardwareIssues.md).
+
+This screen features a burn-in protection feature, where if no buttons or movement have been detected for a while it will automatically blank the screen to try and reduce burn-in if the iron is left unattended. Any movement or button press will wake the screen.
+
+### Hidden Extras
+
+Additionally to the two icons shown, there are two "hidden" actions that can be performed on this menu.
+
+If you press and hold on to the button near the tip of the soldering iron, this will bring up the temperature adjustment screen. Normally this is not required; but if you would like to adjust the set temperature _before_ the tip starts to heat, this can be useful.
+
+If you press and hold the button near the rear of the iron it will take you into the [debug menu](/Documentation/DebugMenu.md).
+
+## Soldering Mode
+
+When you press the button to enter the soldering mode, the iron will instantly start to heat up the tip.
+
+The firmware defaults to 320 °C as the set point for the soldering mode, however on this screen you can enter into the adjustment screen by pressing either button.
+
+Pressing and holding the button near the tip will enter **Boost** mode. This allows a temporary override of the set temperature to a higher (or lower) value. This can be useful as a way to force the tip to a higher temperature to drive more wattage into a large joint when the thermal connection is not ideal.
+
+Pressing and holding the rear button will exit soldering mode and land you back at the home screen. You can also do this by pressing both buttons at once and this will also work, this is a bit harder to do but is kept for compatibility with the Miniware firmware.
+
+Pressing and holding **both** buttons at once will enter locked mode, which will prevent the buttons from doing anything. You can in the settings allow boost mode in locked mode optionally. This can be useful if you find yourself hitting the buttons and entering into the temperature adjustment screen by accident.
+
+### Idle Sleep
+
+If the iron detects a period of time without any significant movement, it will enter sleep mode. This is indicated with a screen graphic similar to Zzzz (or text in detailed mode).
+
+In Sleep mode, the temperature of the iron automatically lowers to 150 °C (default), which is just below the melting point of the solder. This helps reduce rate of oxidation and damage to the iron tip. In general, when not using the iron, unplug it or let it sleep to increase the longevity of replaceable tips. The default sleep temperature can be customized.
+
+Simply picking up or moving the iron will wake it back up into soldering mode. You can also press any button and this will also wake the iron up.
+
+Optional Hall Effect Feature (Pinecil only):
+Pinecil has an unpopulated footprint (U14) for a hall effect sensor (Si7210). Adding the sensor and placing a strong magnet on the holder stand will trigger Pinecil to sleep after it enters the stand, and Zzzz will appear on the screen. The magnet is positioned on the stand in proximity to the sensor which then activates one of 10 user defined settings (0=off, 1=lowest sensitivity, 9=highest sensitivity). Read the Hall Sensor document for details on [installation](/Documentation/HallSensor.md).
+
+
+### Idle Shutdown
+
+If, after entering sleep mode, the iron still does not see movement for a much longer time (default=10 minutes); it will shut down and return to the home screen.
+
+
+## Settings Menu
+
+The settings menu is the most often evolving aspect of the firmware, so each option is not documented here. However, do not panic, as every menu option has an on-screen description so you don't _need_ to come back here to figure them all out.
+
+To navigate the menu, the two buttons act separately.
+The button that you pressed to enter the menu (rear) scrolls down the options, and the other button (front) will enter and change the current option.
+
+To see a description of an option, just wait and after a little time, it will scroll across the screen.
+
+The menu is comprised of a 'main menu' of categories and then sub-items that allows you to adjust parameters.
+
+You can long hold buttons to change through options faster, and there is some acceleration when holding the buttons.
+
+There is a small scrollbar that will be shown along the edge of the screen to indicate how far through the current list you are.
+
+Additionally, this scrollbar will blink rapidly when you are on the last item in a menu choice.
+
+I highly recommend taking a few minutes to go through all of the options in the menu to get a feel for what you can change, almost every aspect of the internal system is adjustable to suit your needs.

Documentation/HallSensor.md

@@ -0,0 +1,20 @@
+# Hall Effect Sensor
+
+## Sleep Mode Menu
+
+In Sleep mode, the temperature of the iron automatically lowers to 150 °C (default), which is just below the melting point of the solder. This helps reduce rate of oxidation and damage to the iron tip. In general, when not using the iron, unplug it or let it sleep to increase the longevity of replaceable tips. The default sleep temperature can be customized.
+
+Simply moving the iron will wake it back up into soldering mode. You can also press any button and this will also wake-up the iron.
+
+### Optional Hall Effect Feature (Pinecil only):
+
+Inside the Sleep Menu is an additional type of sleep setting. Pinecil has an unpopulated footprint (U14) for a hall effect sensor (Si7210). It is possible with the hall sensor to trigger Pinecil to go to sleep after it enters the stand, and Zzzz will appear on the screen. After installing the hall sensor, a magnet is positioned on the stand close enough to the sensor to activate one of ten user selectable settings.
+  - 0=off, 1=1000, 2=750, 3=500, 4=250, 5=150, 6=100, 7=75, 8=50, 9=25   (9 has the highest sensitivity to magnets)
+  - Setting of 1 might be used if you solder on PCBs with magnets and do not wish Pinecil to auto-sleep constantly. And a very strong/large magnet would be required on the stand to activate the sensor sleep mode.
+  - Setting of 9 would be useful if you only had a small magnet and are not concerned about Pinecil falsely triggering sleep mode near magnetized items/tools.
+  - Neodymium magnets are recommended. If using small magnets, 2-3 may be required, but too many can also be detrimental.
+  - Actively watch the hall number change (in [debug menu](/Documentation/DebugMenu.md)) while you slowly move the magnet around to seek the best locations & whether you have too many or too few magnets. Positioning the magnet where you have the highest hall number will ensure consistent sleep mode when you place the iron in the stand. This requires some experimenting.
+  - Sensor is physically located near the copper contacts for the tip at the front of the handle. Reference [Schematics U14](https://files.pine64.org/doc/Pinecil/Pinecil_schematic_v1.0a_20201120.pdf).
+  - Positioning/type/quantity of magnets is important for best results. Sometimes [too many magnets](https://www.youtube.com/shorts/afkqKwCX00I) breaks the effect by distorting the magnetic field.
+  - Orientation of North and South faces of magnets is important to increase reaction of the hall sensor [SI7210-B-00-IV](https://www.silabs.com/documents/public/application-notes/an1018-si72xx-sensors.pdf).
+

Documentation/Hardware.md

@@ -0,0 +1,8 @@
+## Notes on the various supported hardware
+
+### MHP30
+
+- Accelerometer is the MSA301, this is mounted roughly in the middle of the unit
+- USB-PD is using the FUSB302
+- The hardware I2C bus on PB6/7 is used for the MSA301 and FUSB302
+- The OLED is the same SSD1306 as everything else, but its on a bit-banged bus

Documentation/HardwareIssues.md

@@ -0,0 +1,28 @@
+# Hardware Issues
+
+While we would love everything to work perfectly, sometimes that just doesn't happen.
+Please do not email maintainers directly, these will generally be ignored.
+Keep issue discussions to GitHub issues or the discussions page so that the whole community can help and work together.
+
+## No Accelerometer detected
+
+If your iron was previously working, this could be a bug (and we are very sorry). Please check the currently open and recently closed issues to check if anyone else has run into this. You can try going back to a release on the firmware to test if this is a new issue before opening an issue.
+
+If this is a new iron, also feel free to open an issue if you don't see any; a vendor _could_ have changed the model of the accelerometer on us without warning _again_. In which case, support should come shortly.
+
+If your iron is new, there is a slim chance your accelerometer may be DOA and need replacement.
+
+**Note this warning will only be shown the first few times until settings are reset**
+
+## No USB-PD IC detected
+
+Generally, this means either something went very awry in the firmware or the chip is not answering as would normally be expected. Try rolling back to an earlier release to confirm if the issue still persists then the device may need repair. If you have some form of seller protection/support you most likely want to reach out to this to be safe. If you don't, you can always attempt to replace the IC yourself. As of writing both the TS80P and Pinecil use the FUSB302.
+
+**Note this warning will only be shown the first few times until settings are reset**
+
+## No tip detected
+
+if your tip is not being detected, the most likely cause is that the heater element has been damaged from over-temperature, being dropped or bad luck. As the heater coil is part of the temperature measurement circuit neither will work if it's damaged.
+
+The best way to see if this is the case is to measure the resistance across the contacts to the tip using a multimeter.
+you are expecting to see measurements in the range of 4-10 ohms. Anything higher than 10 ohms is _generally_ an issue.

Documentation/History.md

@@ -0,0 +1,231 @@
+# Version Changes
+
+## V2.16
+
+* Overhaul of the Timer+ADC setup with help from @sandmanRO
+* Overhaul of the PID with help from @sandmanRO
+* Settings _should_ now upgrade in place to future versions, with resets only happening to new/changed settings
+* Shows error if tip runaway (failed temperature sensor) is detected
+* USB-PD now has a timeout, to allow forcing QC3 negotiation to start faster
+* QC3 Voltages are now adjustable to user desired setpoint
+* Added a small tolerance to allow "overvoltage" on QC3 above unit specifications.
+* * Please note: Doing this is entirely at your own risk!
+* New Advanced view that is much nicer to use and a very good daily driver option from @Mel-kior
+* OLED brightness and contrast thanks to @alvinhochun
+* Scrollbar is fixed so it doesnt jump around when menus are shown/hidden
+* Moved to `.dfu` files from `.bin` to make flashing commands easier
+* Every language had translation updates I believe
+* Romanian language added
+
+
+## V2.15
+
+
+## Feature upgrades:
+
+* MHP30 support
+* Multi-lingual firmware combinations now exist for Pinecil
+* More fine grained voltage controlled options
+* USB-PD improvements (version one and two)
+* More configuration options for power pulse
+* All font / character encoding has been very reworked
+* More translation updates than one can count 
+* More languages 😱 
+
+### MHP30
+
+The MHP30 is a small reflow station from Miniware.
+Thanks to a massive amount of help from @g3gg0 this firmware brings the beginnings of support for this unit.
+Also kudo's to @Vinigas  and @GoJian for helping with testing.
+This is not a _final_ version I'm sure, but this is a working, usable version of firmware support.
+Programs the same as any one Miniware unit using drag and drop.
+**Note: The boot logo scripts will need updates for this unit, so not supported yet.**
+
+The flood doors are now open for feature requests for this unit :)
+
+## V2.14
+
+- Fixing auto rotation bug in the LIS accelerometer in the TS80/TS80P
+- Adds support for two new accelerometers
+  -- SC7A20 (Future Pinecil batch) #786
+  -- MSA301 (Newer TS80P) #761
+- Add warnings if accelerometer or USB-PD IC's are not detected #752
+  -- Only shows for first few boots, to help catch unsupported models
+- Fixed cooling down blink to be sane speed #769
+- Cleanup of threads and slightly faster power negotiation #790
+
+- Updates to flashing scripts #775
+- Documentation updates all over the place (and the wiki was given a cleanup)|
+- Updates to makefile #792 #787
+- Cleanup the folder name of the source code #800
+- clang-format spec setup #801
+
+## V2.13
+
+- First _official_ Pinecil release
+- All of the wire for Pinecil releases added
+- Updated Translations
+- Delay accelerometer to help with entering sleep on startup
+- Dual speed PWM to help with power limit control
+- Improve heat up time
+- Adds locking mode
+- Improved docs all over the place
+- Repo rename occured TS100 -> IronOS
+- Hall effect sensor support added (not fitted in Pinecil but optional)
+- QC 20V support for Pinecil
+- CI upgrades for faster builds
+- Fixed bug with accelerometer model on Pinecil
+- Rework of all of the temperature curves for better accuracy
+
+## V2.12
+
+- Only released as pre-release
+- [TS80P] Improvements to the PD negotiation to handle a few more adapters cleanly
+- Pause on the last item in a list
+- Clean up the menu (removed both enables and settings, so that you can turn things off easier)
+- Removing the very old single line menu style.
+
+## V2.11
+
+- First TS80P support
+- Added in a USB-PD driver stack for the FUSB302
+- Fixed some graphical glitches
+
+## V2.10
+
+- GUI polish (animations and scroll bars)
+- Power pulse to keep power supplies alive
+- Adjustable tip response gain
+
+## V2.09
+
+- Adjustable steps in temperature adjustment
+- Git hash now in build string
+- Adjustable language to set if US units are available or not
+- Some minor QC3 improvements
+
+## V2.08
+
+- Fixes auto start in sleep mode
+- Power limiters
+
+## V2.07
+
+- QC fixes
+- Cosmetic fixes for leading 0's
+
+## V2.06
+
+- Warning on settings reset
+- Temp temp re-write
+- Display calibration offset
+- Hide some leading 0's
+- Menu timeouts
+
+## V2.05
+
+- Language updates
+
+## V2.04
+
+- GUI updates
+
+## V2.03
+
+- Support for new accelerometers
+
+## V2.02
+
+- Adds small font
+
+## V2.01
+
+- Newer settings menu
+
+## V2.00
+
+- Complete re-write of the low layer system to use the STM32 HAL for easier development
+- This allowed easier setup for the new ADC auto measuring system
+- Better tip PWM control
+- Moved to FreeRTOS for scheduling
+- Complete re-write from blank
+- Added detailed screen views
+- Added smaller font for said screen views
+
+## V1.17
+
+- Added blinking cooldown display
+- Allowed smaller sleep timeout values
+- New font!
+- Automatic startup option
+
+## V1.16
+
+- Added automatic rotation support
+- Added power display graph
+
+## V1.15
+
+- Added support for a custom bootup logo to be programmed via the DFU bootloader
+
+## V1.14
+
+- Changed input voltage cutoff to be based on cell count rather than voltage
+
+## V1.13
+
+- Swapped buttons for menu to prevent accidentally changing first menu item
+- Added auto key repeat
+
+## V1.12
+
+- Increases sensitivity options to be 1\*9 with 0 off state
+- Fixes issue where going from COOL \*> soldering can leave screen off
+
+## V1.11
+
+- Boost mode
+- Change sensitivity options to be 1\*8
+
+## V1.10
+
+- Adds help text to settings
+- Improves settings for the display update rate
+
+## V1.09
+
+- Adds display modes, for slowing down or simplifying the display
+
+## V1.08
+
+- Fix settings menu not showing flip display
+
+## V1.07
+
+- Adds shutdown time to automatically shutdown the iron after inactivity
+
+## V1.06
+
+- Changes H and C when the iron is heating to the minidso chevron like images
+
+## V1.05
+
+- Adds ability to calibrate the input voltage measurement
+
+## V1.04
+
+- Increased accuracy of the temperature control
+- Improved PID response slightly
+- Allows temperature offset calibration
+- Nicer idle screen
+
+## V1.03
+
+- Improved Button handling
+- Ability to set motion sensitivity
+- DC voltmeter page shows input voltage
+
+## V1.02
+
+- Adds hold both buttons on IDLE to access the therometer mode
+- Changes the exit soldering mode to be holding both buttons (Like original firmware)

Documentation/Logo.md

@@ -0,0 +1,39 @@
+# Startup Logos
+
+This firmware supports a user created bootup logo.
+By default there is _not_ one included in the firmware, as this means that once flashed they generally stay.
+
+## Generating the Logo files
+
+The [Python script](https://github.com/Ralim/IronOS-Meta/blob/main/Bootup%20Logos/img2logo.py) converts an image passed into it on the command line to a `.hex` file or a `.dfu` to be uploaded to the iron in DFU mode (similar to the process described above). The image can be in color and any size, but it will be resized and converted to 1-bit color. However, it looks best if you create a 96x16 image in an image editor and color the pixels black or white manually.
+
+There are community logo's already converted available for download in the releases in [IronOS-Meta](https://github.com/Ralim/IronOS-Meta/).
+
+The converter requires at least Python 3 and Pillow (if you don't have it, it will tell you to install PIL, which is an old version of the same thing). See [this page](https://stackoverflow.com/a/20061019/6705343) on StackOverflow about installing it.
+
+What works can vary, but this command may work:
+
+`python3 -m pip install pillow`
+
+Then, to convert an image:
+
+- `python3 img2logo.py infile.png out -m` for Miniware
+- `python3 img2logo.py infile.png out -p` for Pinecil
+
+Run `python3 img2logo.py --help` to see available options.
+
+## Flashing the Logo
+
+### Miniware (TS100/TS80/TS80P)
+
+Upload the HEX file to the iron in DFU mode and, if the file's extension changes to .RDY, your custom splash screen should show up on startup.
+You perform this the same way as if you were flashing a new firmware, and all of the existing notes around this apply.
+
+If you have flashed the `IronOS-dfu` alternative bootloader, you should use the `.dfu` files instead
+
+### Pinecil
+
+For Pinecil, we require using dfu-util instead to flash the logo art (Pinecil does not use hex).
+Please see the [Meta repo](https://github.com/Ralim/IronOS-Meta) for the tooling for converting logo's as well as automatically generated logo's
+
+- `dfu-util -D logo_file.dfu`

Documentation/Menu.md

@@ -0,0 +1,59 @@
+# Menu System
+
+In this firmware for these soldering irons, all settings are adjustable on the device itself. This means you do **not** require a computer to change any settings.
+
+## Soldering mode
+
+In this mode the iron works as you would expect, pressing either button will take you to a temperature change screen.
+Use each button to go up and down in temperature. Pressing both buttons will exit you from the temperature menu (or wait 3 seconds and it will time out).
+Pressing both buttons or holding the button near the USB will exit the soldering mode.
+Holding the button at the front of the iron will enter boost mode (if enabled).
+
+## Settings Menu
+
+This menu allows you to cycle through all the options and set their values.
+The button near the USB cycles through the options, and the one near the tip changes the selected option.
+Note that settings are not saved until you exit the menu.
+If you leave the unit alone (ie don't press any buttons) on a setting, after 3 seconds the screen will scroll a rough description of the setting.
+
+The menu is arranged so that the most often used settings are first.
+With submenus being selected to enter using the front button (as if you were going to change the setting).
+Scrolling through the submenu will return you back to its entry location after you scroll through all of the options.
+
+### Calibrating input voltage
+
+Due to the tolerance on the resistors used for the input voltage divider, some irons can be up to 0.6 V out on the voltage measurement.
+Please calibrate your iron if you have any issues with the cutoff voltage.
+Note that cutoff messages can also be triggered by using a power supply that is too weak and fails under the load of the iron.
+
+To calibrate your iron:
+
+1. Measure the input voltage with a multimeter and note it down.
+2. Connect the input to your iron.
+3. Enter the settings menu
+4. Under the advanced submenu
+5. Select the calibrate voltage option
+6. Use the front and back buttons to adjust the displayed voltage to minimize the error to your original measurement
+7. Press both buttons at the same time to save and exit to the menu
+
+### Calibrating tip offset (Set tip model)
+
+Some tips will have an offset on their readings, to calibrate this out perform the following steps:
+
+1. Connect power to your iron
+2. Make sure the tip is at room temperature (ie. wait for a fair while after using the iron before calibration)
+3. Enter the settings menu
+4. Scroll down to the advanced menu, and then the temperature calibration
+5. Press the button to change the option (tip button)
+6. The display will start to scroll a warning message to check that the tip is at ambient temperature!
+7. Press the button near the tip of the iron to confirm
+8. The display will go to "...." for a short period of time as the unit measures the tip temperature and the handle temperature and compares them
+9. The display will then go back to *TMP CAL* and it will display a number, this is your offset number. You generally don't need it unless debugging issues
+10. Calibration is done, just exit the settings menu as normal
+11. You're done, enjoy your iron!
+
+### Boost mode
+
+This allows you to change the front key (one near the tip) to become a boost button when you hold it for > 2 seconds. This allows you to set this button to change the soldering temperature for short periods. For example when soldering a big joint and you want to boost the temperature a bit.
+
+The boost temperature is set in the settings menu.

Documentation/Power.md

@@ -0,0 +1,24 @@
+# Power & Performance
+
+All of the irons are PWM controlled resistive heating elements.
+This means that the electronics in the handle can only turn the heating element on and off.
+This *means* that the power provided in the tip is 100% controlled by the supply voltage used.
+
+Both irons at their simplest are just a resistor connected to your power source via a switch.
+
+When the switch is on, the power in the resistor is `Current (I) times Volts (V)`.
+Current through the resistor is `Volts (V) divided by Resistance (R)`.
+Combining these two gives the common equation, power is `Volts (V) squared / Resistance (R)`.
+
+The resistance of the tip is fixed, ~7.5 ohms for the TS100/Pinecil and ~4.5 ohms for the TS80(P).
+
+This means that for both irons, the power delivered to the soldering tip is proportional to the voltage used, squared.
+This is why the TS100 performs poorly when run off 12 V power supplies.
+
+## Output Control & Regulation
+
+Both soldering irons use a FET to switch the power to the soldering iron tip. This is a P-MOSFET and its controlled via a small transistor circuit, which in turn is controlled via the STM32. The STM32 controls this PWM output proportional to the output from the PID control loop running in the software.
+
+To measure the tip temperature in the iron, the iron has a small op-amp connected across the terminals, this is setup to measure the voltage across the same terminals that are used the power the tip. In order to be able to read the small voltage generated by the thermocouple junction, the irons output must be turned off.
+Once the output is turned off (via the FET), the system has a recovery time as the tip capacitance discharges and the op-amp exits saturation. After this delay period, the STM32 ADC samples the output of the op-amp 8 times quickly and then sets a flag to turn the PWM output back on.
+This enforces a small dead time in the output signal while this occurs, so there is a balance between sampling the temperature often to maintain stable tip temperature control and sampling less often to increase the maximum power deliverable to the tip

Documentation/Settings.md

@@ -0,0 +1,314 @@
+<!-- This is an automatically generated file. DO NOT EDIT. Edit gen_menu_docs.py instead -->
+
+# IronOS Settings Menu
+
+The below breaks down the menu's and what each setting means.
+    
+## Menu Categories
+
+In the menu there are a few main categories that are used to keep the list manageable.
+
+### Category: Power settings
+
+Menu for settings related to power. Main settings to do with the input voltage.
+
+### Category: Soldering settings
+
+Settings for soldering mode, such as boost temps, the increment used when pressing buttons and if button locking is enabled.
+
+### Category: Sleep mode
+
+Settings to do with power saving, such as sleep mode, sleep temps, and shutdown modes.
+
+### Category: User interface
+
+User interface related settings, such as units.
+
+### Category: Advanced settings
+
+Advanced settings. Misc catchall for settings that don't fit anywhere else or settings that require some thought before use.
+
+## Settings
+
+These are all of the settings possible in the menu.
+**Not all settings are visible for all devices.**
+For example, the TS100 does not have USB-PD settings.
+
+When using the device, if unsure you can pause (press nothing) on a setting and after a short delay help text will scroll across the screen.
+This is the "on device help text".
+
+### Setting: Power source
+
+When the device is powered by a battery, this adjusts the low voltage threshold for when the unit should turn off the heater to protect the battery.
+
+On device help text:
+
+Power source. Sets cutoff voltage. (DC 10V) (S 3.3V per cell, disable power limit)
+
+### Setting: Sleep temp
+
+Temperature the device will drop down to while asleep. Typically around halfway between off and soldering temperature.
+
+On device help text:
+
+Tip temperature while in "sleep mode"
+
+### Setting: Sleep timeout
+
+How long of a period without movement / button-pressing is required before the device drops down to the sleep temperature.
+
+On device help text:
+
+Interval before "sleep mode" kicks in (S=seconds | M=minutes)
+
+### Setting: Shutdown timeout
+
+How long of a period without movement / button-pressing is required before the device turns off the tip heater completely and returns to the main idle screen.
+
+On device help text:
+
+Interval before the iron shuts down (M=minutes)
+
+### Setting: Motion sensitivity
+
+Scale of how sensitive the device is to movement. Higher numbers == more sensitive. 0 == motion detection turned off.
+
+On device help text:
+
+0=off | 1=least sensitive | ... | 9=most sensitive
+
+### Setting: Temperature unit
+
+If the device shows temperatures in °C or °F.
+
+On device help text:
+
+C=Celsius | F=Fahrenheit
+
+### Setting: Detailed idle screen
+
+Should the device show an 'advanced' view on the idle screen. The advanced view uses text to show more details than the typical icons.
+
+On device help text:
+
+Display detailed information in a smaller font on the idle screen
+
+### Setting: Display orientation
+
+If the display should rotate automatically or if it should be fixed for left- or right-handed mode.
+
+On device help text:
+
+R=right-handed | L=left-handed | A=automatic
+
+### Setting: Boost temp
+
+When the unit is in soldering mode. You can hold down the button at the front of the device to temporarily override the soldering temperature to this value. This SETS the temperature, it does not ADD to it.
+
+On device help text:
+
+Temperature used in "boost mode"
+
+### Setting: Start-up behavior
+
+When the device powers up, should it enter into a special mode. These settings set it to either start into soldering mode, sleeping mode or auto mode (Enters into soldering mode on the first movement).
+
+On device help text:
+
+O=off | S=soldering temp | Z=standby at sleep temp until moved | R=standby without heating until moved
+
+### Setting: Cooldown flashing
+
+If the idle screen should blink the tip temperature for attention while the tip is over 50°C. Intended as a 'tip is still hot' warning.
+
+On device help text:
+
+Flash the temperature reading after heating was halted while the tip is still hot
+
+### Setting: Calibrate temperature?
+
+Used to calibrate the ADC+Op-amp offsets for the tip. This calibration must be performed when the tip temperature and the handle temperature are equal. Generally not required unless your device is reading more than 5°C off target.
+
+On device help text:
+
+Start tip temperature offset calibration
+
+### Setting: Restore factory settings?
+
+Resets all settings and calibrations to factory defaults. Does NOT erase custom user boot up logo's.
+
+On device help text:
+
+Reset all settings to default
+
+### Setting: Calibrate input voltage?
+
+Enters an adjustment mode where you can gradually adjust the measured voltage to compensate for any unit-to-unit variance in the voltage sense resistors.
+
+On device help text:
+
+Start VIN calibration (long press to exit)
+
+### Setting: Detailed solder screen
+
+Should the device show an 'advanced' soldering view. This is a text-based view that shows more information at the cost of no nice graphics.
+
+On device help text:
+
+Display detailed information in a smaller font on soldering screen
+
+### Setting: Scrolling speed
+
+How fast the description text scrolls when hovering on a menu. Faster speeds may induce tearing, but allow reading the whole description faster.
+
+On device help text:
+
+Speed info text scrolls past at (S=slow | F=fast)
+
+### Setting: QC voltage
+
+This adjusts the maximum voltage the QC negotiation will adjust to. Does NOT affect USB-PD. Should be set safely based on the current rating of your power supply.
+
+On device help text:
+
+Max QC voltage the iron should negotiate for
+
+### Setting: PD timeout
+
+How long until firmware stops trying to negotiate for USB-PD and tries QC instead. Longer times may help dodgy / old PD adapters, faster times move onto PD quickly. Units of 100ms. Recommended to keep small values.
+
+On device help text:
+
+PD negotiation timeout in 100ms steps for compatibility with some QC chargers
+
+### Setting: Power limit
+
+Allows setting a custom wattage for the device to aim to keep the AVERAGE power below. The unit can't control its peak power no matter how you set this. (Except for MHP30 which will regulate nicely to this). If USB-PD is in use, the limit will be set to the lower of this and the supplies advertised wattage.
+
+On device help text:
+
+Maximum power the iron can use (W=watt)
+
+### Setting: Swap + - keys
+
+Swaps which button increments and decrements on temperature change screens.
+
+On device help text:
+
+Reverse assignment of buttons for temperature adjustment
+
+### Setting: Temp change short
+
+Factor by which the temperature is changed with a quick press of the buttons.
+
+On device help text:
+
+Temperature-change-increment on short button press
+
+### Setting: Temp change long
+
+Factor by which the temperature is changed with a hold of the buttons.
+
+On device help text:
+
+Temperature-change-increment on long button press
+
+### Setting: Power pulse
+
+Enables and sets the wattage of the power pulse. Power pulse causes the device to briefly turn on the heater to draw power to avoid power banks going to sleep.
+
+On device help text:
+
+Intensity of power of keep-awake-pulse (watt)
+
+### Setting: Hall sensor sensitivity
+
+If the unit has a hall effect sensor (Pinecil), this adjusts how sensitive it is at detecting a magnet to put the device into sleep mode.
+
+On device help text:
+
+Sensitivity of the Hall effect sensor to detect sleep (O=off | L=low | M=medium | H=high)
+
+### Setting: Allow locking buttons
+
+If locking the buttons against accidental presses is enabled.
+
+On device help text:
+
+While soldering, hold down both buttons to toggle locking them (D=disable | B=boost mode only | F=full locking)
+
+### Setting: Minimum voltage
+
+When powered by a battery, this adjusts the minimum voltage per cell before shutdown. (This is multiplied by the cell count.)
+
+On device help text:
+
+Minimum allowed voltage per cell (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)
+
+### Setting: Anim. loop
+
+Should the menu animations loop. Only visible if the animation speed is not set to "Off"
+
+On device help text:
+
+Loop icon animations in main menu
+
+### Setting: Anim. speed
+
+How fast should the menu animations loop, or if they should not loop at all.
+
+On device help text:
+
+Pace of icon animations in menu (O=off | S=slow | M=medium | F=fast)
+
+### Setting: Power pulse delay
+
+Adjusts the time interval between power pulses. Longer gaps reduce undesired heating of the tip, but needs to be fast enough to keep your power bank awake.
+
+On device help text:
+
+Delay before keep-awake-pulse is triggered (x 2.5s)
+
+### Setting: Power pulse duration
+
+How long should the power pulse go for. Some power banks require seeing the power draw be sustained for a certain duration to keep awake. Should be kept as short as possible to avoid wasting power / undesired heating of the tip.
+
+On device help text:
+
+Keep-awake-pulse duration (x 250ms)
+
+### Setting: Language:  EN     English
+
+Changes the device language on multi-lingual builds.
+
+On device help text:
+
+Current firmware language
+
+### Setting: Screen brightness
+
+Display brightness. Higher values age the OLED faster due to burn-in. (However, it is notable that most of these screens die from other causes first.)
+
+On device help text:
+
+Adjust the brightness of the OLED screen
+
+### Setting: Invert screen
+
+Inverts the entire OLED.
+
+On device help text:
+
+Invert the colours of the OLED screen
+
+### Setting: Boot logo duration
+
+Sets the duration of the boot logo from 1 second to 4 seconds.
+- For static images this sets the time the logo is displayed for.
+- For animations this sets the time the last frame is displayed for after the animation has been played.
+
+The infinity icon sets a logo or the last frame of an animation to be displayed until a button is pressed.
+
+On device help text:
+
+Sets the duration for the boot logo (S=seconds)

Documentation/Temperature.md

@@ -0,0 +1,58 @@
+# Tip temperature measurement
+
+The soldering irons use a modified N-type thermocouple in the tip to measure the tip temperature.
+This is constructed for free by using a different type of metal to join one of the rings to the heating coil. This effectively creates a free temperature sensor for very low cost and construction difficulty.
+
+The downsides of this are twofold; one, it is made using non-optimal metals and has a non-constant temperature response; and two, as this uses the same connections as the heating current, you can't measure the temperature while you are heating the tip.
+
+
+
+##  How a thermocouple works (brief)
+
+A thermocouple uses a junction of two dissimilar metals to create a very small amount of power (microvolts). This can then be measured and used with a known transfer function to derive the temperature of the junction.
+This has some fairly large limitations, but it also has the benefit of being extremely cheap.
+
+Conventionally a thermocouple is created using two dissimilar metals that join, and then the other ends of these metals are terminated to copper contacts. These copper contacts are also part of the construction of the thermocouple and are referred to as the cold junction.
+As there are these extra two joins between the thermocouple wires and the copper; these also have properties of their own in their reactions with temperature.
+
+If the cold junction is held at 0 degrees Celsius, then their effect is considered to be null, and so they can be ignored. However, in the real world the joins to copper are often at room temperature, and as such the measured voltage from the thermocouple must be compensated to remove the influence of these joints. This process is often called cold junction compensation.
+
+Every time in the circuit there is a join between two different metals, there is a small thermocouple created, this means that _every_ soldered connection is also one. 
+
+
+## How these irons implement the temperature reading
+
+If you analyse one of the open circuit schematics (Pinecil, TS100, TS80) they all use the same approximate formula.
+This consists of an op-amp that is connected directly across the heating connections to the tip, and a separate handle temperature sensor.
+
+When the iron is **not** heating the tip, the microcontroller uses the ADC to read the output from the op-amp. This produces a voltage that _should_ be linear to the temperature of (tip-handle). This value is then offset compensated (to remove ADC+op-amp offsets), and then converted into a temperature delta in °C/K. This temperature delta can then be added to the handle temperature to derive the tip temperature in degrees Celsius.
+
+Depending on the construction of the tip, the lookup values used for converting the tip reading in µV into °C/K varies. It is worth noting, however, that TS100 and Pinecil tips are approximately the same as the Hakko T12 tips. (In @Ralim's testing, to within measurement error). This makes sense as these tips are cheap and would have made an excellent design for Miniware to have cloned in making the TS100 in the first place.
+
+## Implications of this
+
+### Reading accuracy vs Heating performance tradeoff
+
+Because the tip can only be measured when the unit is not heating, the more often the tip is measured (for finer temperature control) the less time the unit can spend heating up the tip. This means that for fast heat up and fine temperature control the firmware now implements two speeds to the controller loop. During heating up the system runs fewer temperature measurements and instead allows the tip to spend more time burning power. Once the unit is up to temperature the rate of taking temperature readings is doubled to allow for faster reaction times.
+
+### Tip heat up lag time
+
+As the temperature sensor is a part of the heater coil inside of the tip (or very close by, not entirely certain); the temperature reading is of the _inside_ of the tip, rather than the outside. The outside temperature is the most critical for the user as this is where the solder is actually melting and performing work.
+
+The PID controller in the firmware is tuned to be slightly underdamped and thus more "jumpy" than some people would expect. This is based on the theory that if the inside of the tip is seeing the temperature droop; the outside temperature has dropped more and so we should overcompensate until they equalise.
+
+This is why sometimes the temperature may flick around a little during use but the tip temperature itself is quite stable. The thermal mass of the tip smooths these small amounts out nicely for the user. Though seeing larger jumps on some tips than others _may_ indicate that the tip does not have optimal internal thermal bonding between the heater coil and the tip itself.
+
+The firmware uses the theory that these irons are more towards the power users territory than most, so it tries to not hide the actual temperature. What some soldering iron controllers do is that they hide the actual measurement once you are within a certain tolerance of this. For example, on a digital Weller unit Ralim has to hand, if set to 350 °C, it will regulate to within around +-3 °C but not indicate you are outside of this bad until you exceed +-5 °C. This gives the illusion that it's holding the temperature perfectly when in actuality it's moving around as well.
+
+Given enough time (3-5 seconds) with no external cooling, the inside and outside temperatures of the tip will be equal. When testing the tip temperature accuracy try to allow time for the system to stabilise.
+
+### Complexity of measurement
+
+The firmware in these irons does a best-effort of calculating an accurate temperature, but as always there is a tradeoff between perfect accuracy and firmware complexity and setup. As these irons are built down to a cost, expecting accuracy greater than 1% is not really an option as the voltage reference is only 1% accurate at best. So _all_ measurements are affected by its accuracy. And the low-cost chips used in the irons do not come calibrated from the factory so we do not have an internal calibration we can use to try and measure this inaccuracy.
+
+The firmware only accounts for cold junction compensation and then treats the remaining error as being a constant offset. 
+While the error is small, it is actually composed of both a constant offset as well as an offset that is linear to the handle temperature.
+This offset that is linear to handle temperature is as of current not modelled into the firmware and there is assumed to be constant. This is generally "close enough" as once the unit is in use, the handle temperature is usually within 10 °C as the components inside warm-up from use. This means that this error is "relatively" constant once the unit is being used. However, this can cause odd behaviour when the tip temperature ~= room temperature. And can cause some jumping and movement in the readings when attempting to control the tip to sub 100 °C.
+
+This is a known tradeoff that is made as the irons intended use case means that it will spend most of its time above 150 °C, at which point these errors are no longer the dominant error sources in the system.

Documentation/Translation.md

@@ -0,0 +1,6 @@
+# Translation
+If you would like to contribute a translation, use the [Translation Editor](http://htmlpreview.github.io/?https://github.com/Ralim/ts100/blob/master/Translations/TranslationEditor.html).
+
+[Open a reference language file and optionally a target language file](https://github.com/Ralim/ts100/tree/master/Translations).
+
+You can create a pull request with the new / updated json configuration file, and this will include this language into the new builds for the firmware.

Documentation/Troubleshooting.md

@@ -0,0 +1,77 @@
+# Troubleshooting
+
+If your device is not operating as expected; and you are within the manufacturer support window, please first contact your manufacturer and RMA / warranty your device.
+
+If your iron is not working as expected, [the Debug menu](DebugMenu.md) exposes internal measurements to help you narrow down the root cause of the issue.
+
+Alongside all of these, issues with the soldering of the main MCU could cause all of these as well; and should always be checked.
+
+The tip is important for the operation of your iron. T100 and Pinecil tips are around 8 ohms, and TS80(P) tips are around 4.5 ohms.
+
+You are welcome to open discussions about issues as well, or if you bought your Pinecil from an official store; use the Pinecil community chat for support.
+But it is helpful to do some basic diagnostics first just in case the issue is easily fixed.
+The **VAST** majority of issues are poor soldering or cold solder joints.
+If you can open up your iron, give it a good look at all the connection points, and use another iron to reflow any suspicious ones, can fix most issues.
+
+## High tip temp reading when the tip is cool
+
+If you are finding the tip is reading high; the first fields to check in the Debug menu are `RTip` and `CHan`.
+
+- `RTip` is the raw tip reading in μV; at cool this should be around 700-1000 for Larger tips and ~1500 for smaller tips (TS80's)
+- `CHan` is the temperature of the temperature sensor on the PCB in degrees Celsius \* 10. So 29 °C ambient should read as 290
+
+### RTip is out of spec
+
+`RTip` will over-read on bad contacts or no tip inserted.
+
+If `RTip` is overreading, you may have one of the following:
+
+- Partially stuck on main MOSFET
+- Slow reacting main MOSFET driver transistor
+- Damaged op-amp
+- Poor soldering on the op-amp circuitry
+- No tip inserted or tip that is not connecting correctly
+
+If `RTip` is under-reading you most likely have issues with the op-amp or the tip. The signal should be pulled high by hardware (reading hot), so this often means the MCU is not reading the signal correctly. Check MCU soldering.
+
+### CHan is out of spec
+
+CHan reading comes directly from the cold junction compensation temperature sensor.
+This is usually a TMP36, or an NTC thermistor (MHP30, TS80P).
+
+If `CHan` is reading low:
+
+- Check the connection from the MCU to the handle temperature sensor.
+- Check the power pin connection on the TMP36
+- Check pullup resistor on the NTC thermistor
+- Check no bridged pins or weak shorts on the signal to nearby pins on MCU or temp sensor
+
+If `CHan` is reading higher
+
+- Check ground connections on the sensors
+- Check no bridged pins or weak shorts on the signal to nearby pins on MCU or temp sensor
+
+## No display OR dots on the display
+
+If when you power up your iron you get no display, the first test is to (carefully) attempt to heat the tip.
+Press the front button on your device and check if the tip heads up.
+If the tip does not heat up, it is worth trying to reflash the firmware first in case it is corrupted.
+
+The main failure mode of the OLED display module is usually poor soldering on the OLED display cable to the main PCB.
+As this is soldered by hand generally, it's the most prone to failures.
+
+If you have a poor connection or a floating pin, you can end up with a state where the screen works _sometimes_ and then freezes or only works on some power cycles.
+
+As the OLED runs on an I2C bus, there are pull up resistors on the SDA and SCL pins. It is worth checking these as well, while they don't often fail, issues with these can cause _weird_ display issues.
+
+## Tip heats when not in heating mode
+
+** DISCONNECT YOUR TIP **
+
+Most likely you have either a blown MOSFET or shorted pin.
+Check the MOSFET and also its driver transistor.
+The firmware will not enable the tip until you are in soldering mode.
+
+## Accelerometer not detected
+
+This could be that your Iron has a new accelerometer that is not supported yet (happens every year or so) OR there is a soldering issue with the accelerometer

Flashing/flash_ts100_linux.sh

@@ -1,9 +1,11 @@
 #!/bin/bash
 # TS100 Flasher for Linux by Alex Wigen (https://github.com/awigen)
+# Jan 2021 - Update by Ysard (https://github.com/ysard)
 
 DIR_TMP="/tmp/ts100"
+HEX_FIRMWARE="$DIR_TMP/ts100.hex"
 
-function usage() {
+usage() {
     echo
     echo "#################"
     echo "# TS100 Flasher #"
@@ -13,41 +15,37 @@ function usage() {
     echo
     echo "This script has been tested to work on Fedora."
     echo "If you experience any issues please open a ticket at:"
-    echo "https://github.com/Ralim/ts100/issues/new"
+    echo "https://github.com/Ralim/IronOS/issues/new"
     echo
 }
 
 GAUTOMOUNT=0
-function disable_gautomount {
-    GSETTINGS=`which gsettings`
-    if [ $? -ne 0 ]; then
+disable_gautomount() {
+    if ! GSETTINGS=$(which gsettings); then
         return 1
     fi
-    gsettings get org.gnome.desktop.media-handling automount | grep true > /dev/null
-    if [ $? -eq 0 ]; then
+    if ! gsettings get org.gnome.desktop.media-handling automount | grep true > /dev/null; then
         GAUTOMOUNT=1
         gsettings set org.gnome.desktop.media-handling automount false
     fi
 }
 
-function enable_gautomount {
+enable_gautomount() {
     if [ "$GAUTOMOUNT" -ne 0 ]; then
         gsettings set org.gnome.desktop.media-handling automount true
     fi
 }
 
-function is_attached {
-    output=`lsblk -b --raw --output NAME,MODEL | grep 'DFU\\\\x20Disk'`
-    if [ $? -ne 0 ]; then
+is_attached() {
+    if ! output=$(lsblk -b --raw --output NAME,MODEL | grep 'DFU.*Disk'); then
       return 1
     fi
-    DEVICE=`echo $output | awk '{print "/dev/"$1}'`
+    DEVICE=$(echo "$output" | awk '{print "/dev/"$1}')
 }
 
 instructions="not printed"
-function wait_for_ts100 {
-    is_attached
-    while [ $? -ne 0 ]; do
+wait_for_ts100() {
+    while ! is_attached; do
         if [ "$instructions" = "not printed" ]; then
             echo
             echo "#####################################################"
@@ -60,29 +58,42 @@ function wait_for_ts100 {
             instructions="printed"
         fi
         sleep 0.1
-        is_attached
     done
 }
 
-function mount_ts100 {
+mount_ts100() {
     mkdir -p "$DIR_TMP"
-    sudo mount -t msdos -o uid=$UID "$DEVICE" "$DIR_TMP"
-    if [ $? -ne 0 ]; then
+    user="${UID:-$(id -u)}"
+    if ! sudo mount -t msdos -o uid=$user "$DEVICE" "$DIR_TMP"; then
         echo "Failed to mount $DEVICE on $DIR_TMP"
         exit 1
     fi
 }
 
-function umount_ts100 {
-    mountpoint "$DIR_TMP" > /dev/null && sudo umount "$DIR_TMP"
-    if [ $? -ne 0 ]; then
+umount_ts100() {
+    if ! (mountpoint "$DIR_TMP" > /dev/null && sudo umount "$DIR_TMP"); then
         echo "Failed to unmount $DIR_TMP"
         exit 1
     fi
     rmdir "$DIR_TMP"
 }
 
-function cleanup {
+check_flash() {
+    RDY_FIRMWARE="${HEX_FIRMWARE%.*}.rdy"
+    ERR_FIRMWARE="${HEX_FIRMWARE%.*}.err"
+    if [ -f "$RDY_FIRMWARE" ]; then
+        echo -e "\e[92mFlash is done\e[0m"
+        echo "Disconnect the USB and power up the iron. You're good to go."
+    elif [ -f "$ERR_FIRMWARE" ]; then
+        echo -e "\e[91mFlash error; Please retry!\e[0m"
+    else
+        echo -e "\e[91mUNKNOWN error\e[0m"
+        echo "Flash result: "
+        ls "$DIR_TMP"/ts100*
+    fi
+}
+
+cleanup() {
     enable_gautomount
     if [ -d "$DIR_TMP" ]; then
         umount_ts100
@@ -102,7 +113,7 @@ if [ ! -f "$1" ]; then
     exit 1
 fi
 
-if [ `head -c1 "$1"` != ":" ] || [ `tail -n1 "$1" | head -c1` != ":" ]; then
+if [ "$(head -c1 "$1")" != ":" ] || [ "$(tail -n1 "$1" | head -c1)" != ":" ]; then
     echo "'$1' doesn't look like a valid HEX file. Please provide a HEX file to flash"
     usage
     exit 1
@@ -115,7 +126,7 @@ echo "Found TS100 config disk device on $DEVICE"
 
 mount_ts100
 echo "Mounted config disk drive, flashing..."
-cp -v "$1" "$DIR_TMP/ts100.hex"
+cp -v "$1" "$HEX_FIRMWARE"
 sync
 
 echo "Waiting for TS100 to flash"
@@ -125,6 +136,5 @@ echo "Remounting config disk drive"
 umount_ts100
 wait_for_ts100
 mount_ts100
+check_flash
 
-echo "Flash result: "
-ls "$DIR_TMP"/ts100*

History.md

@@ -1,89 +0,0 @@
-# Version Changes
-V2.00
-
-* Complete re-write of the low layer system to use the STM32 HAL for easier development
-* This allowed easier setup for the new ADC auto measuring system
-* Better tip PWM control
-* Moved to FreeRTOS for scheduling
-* Complete re-write from blank
-* Added detailed screen views
-* Added smaller font for said screen views
-
-
-V1.17
-
-* Added blinking cooldown display
-* Allowed smaller sleep timeout values
-* New font!
-* Automatic startup option
-
-V1.16
-
-* Added automatic rotation support
-* Added power display graph
-
-V1.15
-
-* Added support for a custom bootup logo to be programmed via the DFU bootloader.
-
-V1.14
-
-* Changed input voltage cutoff to be based on cell count rather than voltage.
-
-V1.13
-
-* Swapped buttons for menu to prevent accidentally changing first menu item
-* Added auto key repeat.
-
-V1.12
-
-* Increases sensitivity options to be 1*9 with 0 off state
-* Fixes issue where going from COOL *> soldering can leave screen off.
-
-V1.11
-
-* Boost mode
-* Change sensitivity options to be 1*8
-
-V1.10
-
-* Adds help text to settings
-* Improves settings for the display update rate
-
-V1.09
-
-* Adds display modes, for slowing down or simplifying the display
-
-V1.08
-
-* Fix settings menu not showing flip display
-
-V1.07
-
-* Adds shutdown time to automatically shutdown the iron after inactivity
-
-V1.06
-
-* Changes H and C when the iron is heating to the minidso chevron like images
-
-V1.05
-
-* Adds ability to calibrate the input voltage measurement
-
-V1.04
-
-* Increased accuracy of the temperature control
-* Improved PID response slightly
-* Allows temperature offset calibration
-* Nicer idle screen
-
-V1.03 
-
-* Improved Button handling
-* Ability to set motion sensitivity
-* DC voltmeter page shows input voltage
-
-V1.02
-
-* Adds hold both buttons on IDLE to access the therometer mode.
-* Changes the exit soldering mode to be holding both buttons (Like original firmware).

ISSUE_TEMPLATE.md

@@ -1,46 +0,0 @@
-Please edit this template and fill out all the information you can (where relevant). Failure to provide essential information can delay the response you receive.
-
-
-* **I'm submitting a ...**
-  - [ ] Bug report
-  - [ ] Feature request
-  - [ ] Translation
-
-
-* **Do you want to request a *feature* or report a *bug*?**
-
-
-
-* **What is the current behavior?**
-
-
-* **What is the expected behavior?**
-
-
-* **If the current behavior is a bug, please provide the steps to reproduce and if possible a minimal demo of the problem**
-
-***Steps to reproduce:***
-
-1. 
-2. 
-3. 
-
-***Video of problem if hard to reproduce***
-
-* **What is the motivation / use case for changing the behavior?**
-
-
-
-* **What are you running:**
-
-On the idle screen, you can hold the settings button and it will show you the firmware version.
-
-  - Firmware Version: 2.x
-  - PCB Version: (1/2)
-  - Power Supply (Voltage and Current Rating) :
-
-
-* **Other information** 
-
-If submitting graphics to go on the iron, please use BMP or PNG files over JPG.
-

LICENSE_RELEASE.md

@@ -0,0 +1,212 @@
+This document outlines the license of IronOS and its dependencies.
+
+- IronOS: GPL-3.0-only
+- FreeRTOS Kernel: MIT
+- FUSB302 driver: Apache-2.0
+- CMSIS + STM32F1xx HAL driver: BSD-3-Clause
+- NMSIS: Apache-2.0
+- GD32VF103 board files: BSD-3-Clause
+- WenQuanYi Bitmap Song font: GPL-2.0-or-later
+- BriefLZ compression library: Zlib
+
+The source code of IronOS can be obtained on the [IronOS GitHub repo][gh].
+
+[gh]: https://github.com/Ralim/IronOS
+
+
+IronOS
+---
+
+Copyright (c) 2016-2020 Ben V. Brown and contributors
+
+For the license text, see `LICENSE` file.
+
+
+FreeRTOS Kernel
+---
+
+```
+Copyright (C) 2020 Amazon.com, Inc. or its affiliates.  All Rights Reserved.
+
+Permission is hereby granted, free of charge, to any person obtaining a copy of
+this software and associated documentation files (the "Software"), to deal in
+the Software without restriction, including without limitation the rights to
+use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
+the Software, and to permit persons to whom the Software is furnished to do so,
+subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in al
+copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITN
+FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS O
+COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHE
+IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+```
+
+
+FUSB302 driver
+---
+
+```
+PD Buddy Firmware Library - USB Power Delivery for everyone
+Copyright 2017-2018 Clayton G. Hobbs
+
+Licensed under the Apache License, Version 2.0 (the "License");
+you may not use this file except in compliance with the License.
+You may obtain a copy of the License at
+
+    http://www.apache.org/licenses/LICENSE-2.0
+
+Unless required by applicable law or agreed to in writing, software
+distributed under the License is distributed on an "AS IS" BASIS,
+WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+See the License for the specific language governing permissions and
+limitations under the License.
+```
+
+
+CMSIS + STM32F1xx HAL driver
+---
+
+* Only applies to TS100, TS80 and TS80P releases.
+
+```
+COPYRIGHT(c) 2017 STMicroelectronics
+
+Redistribution and use in source and binary forms, with or without dification,
+are permitted provided that the following conditions are met:
+  1. Redistributions of source code must retain the above copyright notice,
+     this list of conditions and the following disclaimer.
+  2. Redistributions in binary form must reproduce the above copyright notice,
+     this list of conditions and the following disclaimer in the documentation
+     and/or other materials provided with the distribution.
+  3. Neither the name of STMicroelectronics nor the names of its contributors
+     may be used to endorse or promote products derived from this software
+     without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+```
+
+
+NMSIS
+---
+
+* Only applies to Pinecil releases.
+
+```
+Copyright (c) 2019 Nuclei Limited. All rights reserved.
+
+SPDX-License-Identifier: Apache-2.0
+
+Licensed under the Apache License, Version 2.0 (the License); you may
+not use this file except in compliance with the License.
+You may obtain a copy of the License at
+
+www.apache.org/licenses/LICENSE-2.0
+
+Unless required by applicable law or agreed to in writing, software
+distributed under the License is distributed on an AS IS BASIS, WITHOUT
+WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+See the License for the specific language governing permissions and
+limitations under the License.
+```
+
+GD32VF103 board files
+---
+
+* Only applies to Pinecil releases.
+
+```
+Copyright (c) 2019, GigaDevice Semiconductor Inc.
+
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+1. Redistributions of source code must retain the above copyright notice, this
+    list of conditions and the following disclaimer.
+2. Redistributions in binary form must reproduce the above copyright notice,
+    this list of conditions and the following disclaimer in the documentation
+    and/or other materials provided with the distribution.
+3. Neither the name of the copyright holder nor the names of its contributors
+    may be used to endorse or promote products derived from this software without
+    specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
+INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
+OF SUCH DAMAGE.
+```
+
+
+WenQuanYi Bitmap Song font
+---
+
+* Only applies to CJK (Chinese, Japanese and Korean) language releases.
+
+```
+Copyright (c) 2004-2010, The WenQuanYi Project 
+              Board of Trustees and Qianqian Fang
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+```
+
+
+BriefLZ compression library
+---
+
+* Only applies to multi-language builds.
+
+```
+The zlib License (Zlib)
+
+Copyright (c) 2002-2020 Joergen Ibsen
+
+This software is provided 'as-is', without any express or implied
+warranty. In no event will the authors be held liable for any damages
+arising from the use of this software.
+
+Permission is granted to anyone to use this software for any purpose,
+including commercial applications, and to alter it and redistribute it
+freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must
+     not claim that you wrote the original software. If you use this
+     software in a product, an acknowledgment in the product
+     documentation would be appreciated but is not required.
+
+  2. Altered source versions must be plainly marked as such, and must
+     not be misrepresented as being the original software.
+
+  3. This notice may not be removed or altered from any source
+     distribution.
+```

PULL_REQUEST_TEMPLATE.md

@@ -1,29 +1,18 @@
 
-Please try and fill out this template where possible, not all fields are required and can be removed.
+<!-- Please try and fill out this template where possible, not all fields are required and can be removed. -->
 
 * **Please check if the PR fulfills these requirements**
-- [ ] The commit message make sense
-- [ ] The changes have been tested locally
-- [ ] New features have been documented in the Wiki
-- [ ] I'm willing to maintain this in the future (Totally Optional)
+- [] The changes have been tested locally
+- [] There are no breaking changes
 
-
-* **What kind of change does this PR introduce?** 
-(Bug fix, feature, docs update, ...)
+* **What kind of change does this PR introduce?**
+<!-- (Bug fix, feature, docs update, ...) -->
 
 
 
-* **What is the current behavior?** 
-(You can also link to an open issue here)
-
-
+* **What is the current behavior?**
+<!-- (You can also just link to an open issue here) -->
 
 * **What is the new behavior (if this is a feature change)?**
 
-
-
-* **Does this PR introduce a breaking change?** 
-(What changes might users need to make in their application due to this PR?)
-
-
 * **Other information**:

README.md

@@ -1,152 +1,94 @@
-# TS100
-This is a complete rewrite of the open source software for the ts100 soldering iron.
-The version two fork of this code has no shared code with the original firmware from Miniware (E-design) group.
-This project is considered feature complete for use as a soldering iron, *so please suggest any feature improvements you would like!*
+![CI](https://github.com/Ralim/ts100/workflows/CI%20Build%20all/badge.svg)
+![GitHub all](https://img.shields.io/github/downloads/ralim/IronOS/total)
+![Latest Release](https://img.shields.io/github/v/release/ralim/IronOS)
 
-A short(ish) video that goes through every single menu option in the firmware is available [over here](https://www.youtube.com/watch?v=WlnpboYfxNk). 
-This video was created on an earlier 1.x version of the firmware, so alot has changed and a new video will be coming soon for the 2.x fork.
+# IronOS - Flexible Soldering iron control Firmware
 
-*This firmware does **NOT** support the usb port while running for changing settings. This is done through the onscreen menu only. Logos are edited using the tool or python script and uploaded in DFU mode.*
+_This repository was formerly known as TS100, it's the same great code. Just with more supported devices._
 
-*Please note that when running the iron off a Lithium battery pack, the Iron is only rated to 24V input. So using a fully charged 6S battery *slightly* exceeds this rating, and is done so at your own risk.
-Please calibrate your irons voltage reading when you are using a lithium battery after any firmware upgrades.*
+Originally conceived as an alternative firmware for the TS100, this firmware has evolved into a complex soldering iron control firmware.
 
-## Features
-* PID iron temperature control
-* Automatic sleep with selectable sensitivity
-* Motion wake support
-* Settings menu on the unit
-* Set a voltage lower limit for Lithium batteries so you dont kill your battery pack
-* All settings saved to flash when you exit the menu
-* Improved readability Fonts
-* Use hardware features to improve reliability
-* Can disable movement detection if desired
-* Calibration of the thermocouple offset
-* Boost mode lets you temporarily change the temperature when soldering (ie raise temperature for short periods of time)
-* Battery charge level indicatior if power source set to a lipo cell count.
-* Custom bootup logo support
-* Automatic LCD rotation based on orientation
+The firmware implements all of the standard features of a "smart" soldering iron, with lots of little extras and tweaks.
+I highly recommend reading the installation guide fully when installing on your iron. And after install just explore the settings menu.
 
-## Upgrading your ts100 iron
+For soldering irons that are designed to be powered by "smart" power sources (QC and PD), the firmware supports settings around the negotiated power and voltage.
+For soldering irons that are designed to be powered by batteries (TS100 & Pinecil), settings for a cutoff voltage for battery protection are supported.
 
-This is completely safe, if it goes wrong just put the .hex file from the official website onto the unit and your back to the old firmware. Downloads for the hex files to flash are available on the [releases page.](https://github.com/Ralim/ts100/releases) The file you want is called *ts100.hex* unless you want the translations, they are ts100_*language short name*.hex.
+There are 30 languages currently supported as of present. When downloading the firmware for your soldering iron take note of the language code in the file name.
 
-Officially the bootloader on the iron only works under windows. However, users have reported that it does work under Mac, and can be made to work under Linux *sometimes*. Details over on the [wiki page](https://github.com/Ralim/ts100/wiki/Upgrading-Firmware).
+This project is considered feature complete for use as a soldering iron, _so please suggest any feature improvements you would like!_
 
-1. Hold the button closest to the tip, and plug in the USB to the computer.
-2. The unit will appear as a USB drive.
-3. Drag the .hex file onto the USB drive.
-4. The unit will disconnect and reconnect.
-5. The filename will have changed to end in .RDY or .ERR 
-6. If it ends with .RDY you're done! Otherwise something went wrong.
-7. Disconnect the USB and power up the iron. You're good to go.
+_This firmware does **NOT** support the USB port while running for changing settings. This is done through the onscreen menu only. Logos are edited using the tool or python script and uploaded in DFU mode._
 
-For the more adventurerous out there, you can also load this firmware onto the device using a SWD programmer.
-On the bottom of the MCU riser pcb, there are 4 pads for programming.
-There is a complete device flash backup included in this repository. (Note this includes the bootloader, so will need a SWD programmer to load onto the unit). Please do not use the backup of the bootloader for anything malicious, its only saved here for those who are tinkering with their iron and decide to replace it.
+To get started with this firmware, please jump over to [here](Documentation/GettingStarted.md).
+But the [TL;DR](https://www.merriam-webster.com/dictionary/TL%3BDR) is to press the button near the front of the iron to heat up. Use the button near the back of the iron to enter the settings menu.
+Long hold the rear button in soldering mode to exit back to the start screen.
 
-## Setting a custom bootup image
+## Installation
 
-This firmware uses a different method of updating the bootup image.
-This removes the need for emulating a USB drive on the iron just to allow for a bootup image to be setup.
-There are further instructions on the [wiki](https://github.com/Ralim/ts100/wiki/Logo-Editor). Instructions are kept on the wiki so that users can update the information if they find extra helpful information.
+For notes on installation for your device, please refer to the [Flashing Guide](Documentation/Flashing.md).
 
-## New Menu System
+## Key Features
+
+- PID style iron temperature control
+- Automatic sleep with selectable sensitivity
+- Motion wake support
+- All settings exposed in the intuitive menu
+- (TS100) Set a voltage lower limit for Lithium batteries so you don't kill your battery pack
+- (TS80) Set 18 W or 24 W settings for your power bank
+- (TS80P) Automatically negotiates appropriate PD and falls back to QC mode like TS80
+- (Pinecil) Supports all 3 power modes (PD, QC, DC In).
+- Improved readability Fonts, supporting multiple languages
+- Use hardware features to improve reliability
+- Can disable movement detection if desired
+- Boost mode lets you temporarily change the temperature when soldering (i.e. raise the temperature for short periods)
+- (TS100/Pinecil) Battery charge level indicator if power source set to a lipo cell count
+- (TS80/TS80P/Pinecil) Power bank operating voltage is displayed
+- [Custom boot up logo support](Documentation/Logo.md)
+- Automatic LCD rotation based on the orientation
+
+## Menu System
 
 This new firmware uses a new menu system to allow access to the settings on the device.
-When on the main screen, the unit shows prompts for the two most common operations.
-* Pressing the button near the tip enters soldering mode
-* Pressing the button near the USB enters the settings menu.
-* Holding the button near the tip will enter soldering temperature adjust mode (This is the same as the one in the soldering menu, just to let you edit before heating up).
-* Holding the button near the USB end will show the firmware version details.
-## Soldering mode
+When on the main screen and having the tip plugged in, the unit shows a pair of prompts for the two most common operations.
 
-In this mode the iron works as you would expect, pressing either button will take you to a temperature change screen. 
-Use each button to go up and down in temperature. Pressing both buttons will exit you from the temperature menu (or wait 3 seconds and it will time out).
-Pressing both buttons or holding the button near the USB will exit the soldering mode.
-Holding the button at the front of the iron will enter boost mode (if enabled).
-
-## Settings Menu
-
-This menu allows you to cycle through all the options and set their values.
-The button near the USB cycles through the options, and the one near the tip changes the selected option.
-Note that settings are not saved until you exit the menu, and some settings such as screen flip do not apply until a power cycle is applied.
-If you leave the unit alone (ie don't press any buttons) on a setting, after 3 seconds the screen will scroll a longer version of the name
-
-* PWRSC -> Power source, select a cell count if using a LiPo, or DC to disable the shutdown. (Sets it to minimum of 10V).
-* STMP -> The temperature the unit drops to in sleep mode
-* SLTME -> Sleep time, how long it takes before the unit goes to sleep
-* SHTME -> Shutdown Time, how long the unit will wait after movement before shutting down completely
-* MSENSE -> Motion Sensitivity,0*9,0 means motion sensing is turned off, 9 is most sensitive, 1 is least sensitive (ie takes more movement to trigger)
-* ADVDSP -> Enable the advanced display (shows more details)
-* DSPROT -> Display rotation mode, Automatic, Left handed or Right handed
-* BOOST -> Enable boost mode
-* BTMP -> Set the temperature for the boost mode
-* ASART -> Automatically start the unit when power is applied (i.e. the unit will go straight into soldering mode)
-* CLBLNK -> Blink the screen as an alert when cooling down
-* TMP CAL -> Use to calibrate offset on the tip temperature
-* RESET -> Use to force a complete reset on exit of the settings menu
-* TMPUNIT -> Temperature unit, C or F
-
-### Calibrating input voltage
-
-Due to the tolerance on the resistors used for the input voltage divider, some irons can be up to 0.6V out on the voltage measurement.
-Please calibrate your iron if you have any issues with the cutoff voltage. 
-Note that cutoff messages can also be triggered by using a power supply that is too weak and fails under the load of the iron.
-This is more critical than before with the new cell count based cutout voltage.
-
-To calibrate your Iron:
-
-1. Measure the input voltage with a multimeter and note it down.
-2. Connect the input to your iron.
-3. On the home screen (showing iron symbol), press both buttons simultainiously.
-4. The iron will now show the tip temperature.
-5. Press the button near the soldering iron tip.
-6. The screen will display the measured input voltage.
-7. If this is the same as what you measured before skip to step 13
-8. Otherwise, press the button near the USB end of the iron
-9. The voltage will now slowly blink.
-10. Use the buttons to adjust the reading up and down until it reads as close as possible to the voltage you measured earlier.
-11. When it is reading as close as possible, press both buttons at once.
-12. The screen will go back to just showing the input voltage.
-13. Press the button near the tip of the iron to exit back to the live temperature display.
-14. Press both buttons at once to exit back to the idle screen.
-15. You're done. Enjoy your iron.
-
-### Calibrating tip offset
-
-Some tips will have an offset on their readings, to calibrate this out perform the following steps:
-
-1. Connect power to your iron
-2. Make sure the tip is at room temperature (ie. wait for a fair while after using the iron before calibration)
-3. Enter the settings menu
-4. Scroll down to *TMP CAL*
-5. Press the button to change the option (tip button)
-6. The display will start to scroll a warning message to check that the tip is at ambient temperature!
-7. Press the button near the tip of the iron to confirm.
-8. The display will go to "...." for a short period of time as the unit measures the tip temperature and the handle temperature and compares them
-9. The display will then go back to *TMP CAL*
-10. Calibration is done, just exit the settings menu as normal 
-11. You're done. Enjoy your iron.
-
-### Boost mode
-
-This allows you to change the front key (one near the tip) to become a boost button when you hold it for > 2 seconds. This allows you to set this button to change the soldering temperature for short periods. For example when soldering a big joint and you want to boost the temperature a bit.
-
-The boost temperature is set in the settings menu.
+- Pressing the button near the tip enters the *soldering mode*
+- Pressing the button near the USB end enters the *settings menu*
+- When not in *soldering mode*, holding down the button near the tip will enter *soldering temperature adjust mode* (This is the same as the one in the *soldering mode*, but allows to adjust the temperature before heating up), in *soldering mode* however this will activate *boost mode* as long as you hold down the button.
+- Holding down the button near the USB end will show the *[debug menu](Documentation/DebugMenu.md).* In *soldering mode* this ends the heating.
 
+Operation details are over in the [Menu information.](Documentation/Menu.md)
 
 ## Thanks
 
-If you love this firmware and want to continue my caffine addiction, you can do so here (or email me for other options) : https://paypal.me/RalimTek
+If you love this firmware and want to continue my caffeine addiction, you can do so [here](https://paypal.me/RalimTek) (or email me for other options).
+I also want to give a shout out to all of the [Fantastic Contributors](https://github.com/Ralim/ts100/graphs/contributors).
+
+Especially to the following users, who have helped in various ways that are massively appreciated:
+
+- [Dhiltonp](https://github.com/dhiltonp)
+- [Mrkvozrout](https://github.com/Mrkvozrout)
+- [JonnieZG](https://github.com/jonnieZG)
+- [Federck](https://github.com/federck)
+- [Jvitkauskas](https://github.com/jvitkauskas)
+- [Doegox](https://github.com/doegox)
+- [Perillamint](https://github.com/perillamint)
+- [GeminiServer](https://github.com/GeminiServer)
+- [Patrick Horlebein](https://github.com/PixelPirate)
+- [Firebie](https://github.com/Firebie)
+- [Agatti](https://github.com/agatti)
+- [Discip](https://github.com/discip)
+- [Paul Fertser](https://github.com/paulfertser)
+
+Plus the huge number of people who have contributed translations, your effort is massively appreciated.
 
 ## Licence
 
-The code in this repository that is based on the STM tools is under a BSD like licence.
-The code created by the communitiy is GNU GPLv3.
-The FreeRToS is under its own licence.
+The code created by the community is GNU GPLv3. Unless noted elsewhere.
+Other components such as FreeRTOS/USB-PD have their own licence.
 
 ## Commercial Use
 
-This software is provided as-is, so I cannot provide any commercial support for the firmware. However you are more than welcome to distribute links to the firmware, or provide irons with this software on them. 
-Please do not re-host the files, but rather link to this page, so that there are not old versions of the firmware scattered around. If this firmware does make you money, it would be nice to recieve a donation, however there is no enforcement.
+This software is provided as-is, so I cannot provide any commercial support for the firmware.
+However, you are more than welcome to distribute links to the firmware or provide irons with this software on them.
+Please do not re-host the files, but rather link to this page, so that there are no old versions of the firmware scattered around.

SECURITY.md

@@ -0,0 +1,18 @@
+# Security Policy
+
+## Supported Versions
+
+Use this section to tell people about which versions of your project are
+currently being supported with security updates.
+
+| Version | Supported          |
+| ------- | ------------------ |
+| Latest Release   | :white_check_mark: |
+| master   | :white_check_mark:                |
+
+## Reporting a Vulnerability
+
+1. Report in an issue please and tag @ralim
+2. All issues are read within 1 working week in general; often within 24 hours
+3. Issue shall recieve a comment within 14 days; but goal is < 2.
+4. Issue will be open until the vulnerability is closed in all supported versions

Translation.md

@@ -1,5 +0,0 @@
-# Translation
-If you would like to contribute a translation, look at the file `translation.c` in the source code.
-Currently translations are compiled in at compile time with #defines (nothing complex).
-So all you need to do is add another section formatted like the english one that is there and either create a pull request or a github issue for inclusion.
-If the glyphs required already exist in the fonts then support should be quick. Otherwise it may take longer for the fonts to be created.

Translations/BitmapEditor.html

@@ -0,0 +1,491 @@
+<!DOCTYPE html>
+<html>
+  <head>
+    <script src="https://cdn.jsdelivr.net/npm/vue/dist/vue.js"></script>
+    <script src="translations_commons.js"></script>
+    <title>TS100 Bitmap Editor</title>
+    <style id="styles">
+      .matrix {
+        display: inline-block;
+        padding: 0px 0px 1px 1px;
+        background-color: #666;
+        margin-top: 1em;
+        margin-bottom: 1em;
+      }
+
+      .matrix * {
+        font-size: 0;
+      }
+      .r {
+        white-space: nowrap;
+      }
+      .c {
+        margin: 1px 1px 0px 0px;
+        display: inline-block;
+        background-color: #fff;
+        height: 10px;
+        width: 10px;
+      }
+
+      .x {
+        background-color: #000;
+      }
+
+      .header {
+      }
+
+      .data input,
+      .data textarea {
+        margin-top: 1em;
+        width: 100%;
+      }
+
+      .actions {
+      }
+    </style>
+    <script>
+      var ink, pressed, ev;
+      function mousedown(e) {
+        c = window.event.target;
+        classes = c.className.split(" ");
+        if (classes.indexOf("c") < 0) {
+          return;
+        }
+        ink = classes.indexOf("x") < 0;
+        pressed = true;
+        ev = e;
+        enter(e);
+      }
+
+      function mouseup(e) {
+        ev = e;
+        pressed = false;
+      }
+
+      function enter(e) {
+        if (!pressed) {
+          return;
+        }
+        ev = e;
+        c = window.event.target;
+        paint(c, ink);
+        stringFromMatrix();
+      }
+
+      function paint(c, ink) {
+        var cellInk = isInk(c);
+        if (ink) {
+          if (!cellInk) {
+            c.className += " x";
+          }
+        } else {
+          if (cellInk) {
+            c.className = "c";
+          }
+        }
+      }
+
+      function isInk(c) {
+        try {
+          var classes = c.className.split(" ");
+          return classes.indexOf("x") >= 0;
+        } catch (e) {
+          return false;
+        }
+      }
+
+      function getMatrix() {
+        return document.getElementById("matrix");
+      }
+
+      function getCoordinatesFromId(str) {
+        i = str.indexOf("_");
+        return {
+          row: parseInt(str.substring(1, i)),
+          col: parseInt(str.substring(i + 1)),
+        };
+      }
+
+      function clearMatrix() {
+        for (var r = 0; r < app.matrix.rows; r++) {
+          for (var c = 0; c < app.matrix.cols; c++) {
+            paint(getCell(r, c), false);
+          }
+        }
+      }
+
+      function invertMatrix() {
+        for (var r = 0; r < app.matrix.rows; r++) {
+          for (var c = 0; c < app.matrix.cols; c++) {
+            cell = getCell(r, c);
+            if (isInk(cell) == true) paint(cell, false);
+            else paint(cell, true);
+          }
+        }
+        stringFromMatrix();
+      }
+
+      function getCell(row, col) {
+        return document.getElementById("C" + row + "_" + col);
+      }
+
+      function toMatrix(str) {
+        app.encodedData = str;
+        clearMatrix();
+        var strs = str.split(/[ ,]/);
+        var pair = false;
+        var c = 0;
+        var rs = 7;
+        for (var i = 0; i < strs.length; i++) {
+          var d = strs[i];
+          if (d.length > 0) {
+            if (startsWith(d, "0x")) {
+              v = parseInt(d.substring(2), 16);
+            } else {
+              v = parseInt(d);
+            }
+            sv = padLeft(v.toString(2), "0", 8);
+            for (r = 0; r < 8; r++) {
+              paint(getCell(rs - r, c), sv.charAt(r) == "1");
+            }
+            c++;
+            if (c >= app.matrix.cols) {
+              c = 0;
+              rs += 8;
+            }
+          }
+        }
+        stringFromMatrix(true, false);
+      }
+
+      function escapedToMatrix(str) {
+        app.encodedEscapeSequence = str;
+        clearMatrix();
+        var strs = str.split("\\x");
+        var c = 0;
+        var rs = 7;
+        for (var i = 0; i < strs.length; i++) {
+          var d = strs[i];
+          if (d.length > 0) {
+            v = parseInt(d, 16);
+            sv = padLeft(v.toString(2), "0", 8);
+            for (r = 0; r < 8; r++) {
+              paint(getCell(rs - r, c), sv.charAt(r) == "1");
+            }
+            c++;
+            if (c >= app.matrix.cols) {
+              c = 0;
+              rs += 8;
+            }
+          }
+        }
+        stringFromMatrix(false, true);
+      }
+
+      // Rather than trying to figure these crazy cells/matrix, we just
+      // slurp up the encoded string at the end. It's updated on every
+      // pixl change, redraw, and load so just slipping into
+      // stringFromMatrix is tacky, but seemss to catch all our refreshes.
+      //
+      // The string is CSV hex, with the first byte being the first column,
+      // and bit zero being the UL corner. Second byte is second column, etc.
+      // app.matrix.{cols,rows} is set by the drawing code to size the
+      // image for a character, an icon, or the full screen image. This
+      // code adapts resizing from that.
+      // INVERT is handled by the code above us, our fill/clearRect handles
+      // that.
+      function updateCanvas(buf) {
+        // Number of squared canvas pixels to image pixels;
+        var scale = 1;
+
+        var c = document.getElementById("myCanvas");
+        var context = c.getContext("2d");
+        context.fillRect(0, 0, c.width, c.height);
+
+        if (c.width != app.matrix.cols || c.height != app.matrix.rows) {
+          c.width = app.matrix.cols * scale;
+          c.height = app.matrix.rows * scale;
+        }
+        context.clearRect(0, 0, c.width, c.height);
+
+        var a = buf.split(",");
+        var x = 0;
+        var y = 0;
+
+        for (var e = 0; e < a.length; e++) {
+          byte = parseInt(a[e], 16);
+          for (var bit = 0; bit < 8; bit++) {
+            // debug.innerHTML+= e + ": " + x + "/" +  y + " " + a.length + "</br>";
+            // debug.innerHTML+= app.matrix.cols + "</br>";
+            if (x > c.cols) {
+              throw "write past right of canvas";
+            }
+            if (x > c.rows) {
+              throw "write past bottom of canvas";
+            }
+            if (byte & (1 << bit)) {
+              // FillRect give better B&W image
+              if (scale > 1) {
+                context.moveTo(x, y);
+                context.lineWidth = scale;
+                context.lineTo(x + scale, y);
+              } else {
+                context.beginPath();
+                context.fillRect(x, y, 1, 1);
+                context.fill();
+              }
+            }
+            y += scale;
+          }
+          y -= 8 * scale;
+          x += scale;
+          if (x == app.matrix.cols * scale) {
+            x = 0;
+            y = 8 * scale;
+          }
+          // debug.innerHTML+= x + " " + x/app.matrix.cols + " " + y + "</br>";
+          // debug.innerHTML+=byte + "</br>";
+        }
+
+        context.strokeStyle = "black";
+        context.stroke();
+        return c;
+      }
+
+      function makePNG() {
+        var canvas = document.getElementById("myCanvas");
+        //var context = c.getContext("2d");
+        //window.location = canvas.toDataURL("image/png");
+        ///var image = canvas.toDataURL("image/png");
+        //	document.write('<img src="'+image+'"/>');
+        var image = canvas
+          .toDataURL("image/png")
+          .replace("image/png", "image/octet-stream");
+        window.location.href = image;
+      }
+
+      function stringFromMatrix(skipEncodedData, skipEncodedEscapeSequence) {
+        var str = "";
+        var strEscaped = "";
+        var delim = "";
+        var blocks = app.matrix.rows / 8;
+        var rs = 7;
+        for (var block = 0; block < blocks; block++) {
+          for (var c = 0; c < app.matrix.cols; c++) {
+            var b = 0;
+            for (var r = 0; r < 8; r++) {
+              var cell = document.getElementById("C" + (rs - r) + "_" + c);
+              if (isInk(cell)) {
+                b |= 1 << (7 - r);
+              }
+            }
+            str += delim + "0x" + padLeft(b.toString(16).toUpperCase(), "0", 2);
+            strEscaped += "\\x" + padLeft(b.toString(16).toUpperCase(), "0", 2);
+            delim = ",";
+          }
+          rs += 8;
+        }
+        if (!skipEncodedData) {
+          app.encodedData = str;
+        }
+        if (!skipEncodedEscapeSequence) {
+          app.encodedEscapeSequence = strEscaped;
+        }
+        updateCanvas(str);
+        return str;
+      }
+
+      function start() {
+        app = new Vue({
+          el: "#app",
+          data: {
+            matrix: {
+              cols: 12,
+              rows: 16,
+            },
+            type: "big",
+            encodedData: "",
+            encodedEscapeSequence: "",
+          },
+          methods: {
+            VtoMatrix: function (val) {
+              toMatrix(val);
+            },
+            escapedToMatrix: function (val) {
+              escapedToMatrix(val);
+            },
+
+            VchangeSize: function () {
+              if (app.type == "big") {
+                app.matrix.cols = 12;
+                app.matrix.rows = 16;
+              } else if (app.type == "small") {
+                app.matrix.cols = 6;
+                app.matrix.rows = 8;
+              } else if (app.type == "icon") {
+                app.matrix.cols = 16;
+                app.matrix.rows = 16;
+              } else if (app.type == "icon24") {
+                app.matrix.cols = 24;
+                app.matrix.rows = 16;
+              } else if (app.type == "screen") {
+                app.matrix.cols = 84;
+                app.matrix.rows = 16;
+              } else if (app.type == "fullscreen") {
+                app.matrix.cols = 96;
+                app.matrix.rows = 16;
+              }
+              stringFromMatrix();
+            },
+          },
+        });
+        toMatrix(
+          "0x00,0xF0,0x08,0x0E,0x02,0x02,0x02,0x02,0x0E,0x08,0xF0,0x00,0x00,0x3F,0x40,0x5C,0x5C,0x5C,0x5C,0x5C,0x5C,0x40,0x3F,0x00"
+        );
+      }
+
+      var margins = 1;
+
+      function changesize(x) {
+        var cursize = x;
+        var mg;
+        if (x < 6) mg = 0;
+        else mg = 1;
+        //		var elements = document.getElementsByClassName('c');
+        //		for (var i=0; i<elements.length;i++){
+        //			elements.item(i).style="height: "+x+"px; width: "+x+"px;"+mg;
+        //		}
+        styles.sheet.rules[3].style.height = x + "px";
+        styles.sheet.rules[3].style.width = x + "px";
+        styles.sheet.rules[3].style.marginRight = mg + "px";
+        styles.sheet.rules[3].style.marginTop = mg + "px";
+        styles.sheet.rules[0].style.paddingLeft = mg + "px";
+        styles.sheet.rules[0].style.paddingBottom = mg + "px";
+      }
+
+      function importFile() {
+        var input, file, fr;
+        input = document.getElementById("fileinput");
+        if (input.files[0]) {
+          file = input.files[0];
+          fr = new FileReader();
+          fr.onload = processData;
+          fr.readAsBinaryString(file);
+        }
+        function processData() {
+          var pushy, data, aB, bS;
+          pushy = [];
+          //			bodyAppend("p","processing data");
+          data = fr.result;
+          for (i = 297; i < 297 + 192; i += 2) {
+            aB = data.charCodeAt(i + 1);
+            bS = aB.toString(16);
+            if (bS.length < 2) bS = "0" + bS;
+            pushy.push(bS);
+            aB = data.charCodeAt(i);
+            bS = aB.toString(16);
+            if (bS.length < 2) bS = "0" + bS;
+            pushy.push(bS);
+          }
+          escapedToMatrix("\\x" + pushy.join("\\x"));
+          //			bodyAppend("p","\\x"+pushy.join("\\x"));
+        }
+      }
+      function bodyAppend(tagName, innerHTML) {
+        var elm;
+
+        elm = document.createElement(tagName);
+        elm.innerHTML = innerHTML;
+        document.body.appendChild(elm);
+      }
+
+      window.onload = start;
+    </script>
+  </head>
+  <body>
+    <div id="app">
+      <div class="header">
+        <select v-model="type" v-on:change="VchangeSize()">
+          <option value="small">Small Font (6x8)</option>
+          <option value="big">Big Font (12x16)</option>
+          <option value="icon">Icon (16x16)</option>
+          <option value="icon24">Icon (24x16)</option>
+          <option value="screen">Screen (84x16)</option>
+          <option value="fullscreen">Full Screen (96x16)</option>
+        </select>
+        <a href="#" onclick="changesize(1);">1x</a>
+        <a href="#" onclick="changesize(2);">2x</a>
+        <a href="#" onclick="changesize(4);">4x</a>
+        <a href="#" onclick="changesize(8);">8x</a>
+        <a href="#" onclick="changesize(10);">10x</a>
+        <a href="#" onclick="changesize(12);">12x</a>
+        <a href="#" onclick="changesize(16);">16x</a>
+        <a href="#" onclick="changesize(32);">32x</a>
+        <a href="#" onclick="invertMatrix();">INVERT!</a>
+      </div>
+      <div
+        id="matrix"
+        class="matrix"
+        onmousedown="mousedown(this)"
+        onmouseup="mouseup(this)"
+        ondragstart="return false"
+      >
+        <div :id="'R'+(r-1)" class="r" v-for="r in matrix.rows">
+          <div
+            :id="'C'+(r-1)+'_'+(c-1)"
+            class="c"
+            onmouseenter="enter(this)"
+            v-for="c in matrix.cols"
+          ></div>
+        </div>
+      </div>
+      <div class="actions">
+        <input
+          type="button"
+          value="Clear"
+          onclick="clearMatrix();stringFromMatrix()"
+        />
+      </div>
+      <div class="data">
+        <textarea
+          v-model="encodedData"
+          style="width: 100%"
+          v-on:change="VtoMatrix(encodedData)"
+          rows="5"
+        ></textarea>
+        <textarea
+          v-model="encodedEscapeSequence"
+          style="width: 100%"
+          v-on:change="escapedToMatrix(encodedEscapeSequence)"
+          rows="5"
+        ></textarea>
+      </div>
+
+      <form action="#" onsubmit="return false;">
+        <input type="file" id="fileinput" />
+        <input
+          type="button"
+          id="btnLoad"
+          value="Import"
+          onclick="importFile();"
+        />
+        (Remember to set correct canvas size before importing)
+      </form>
+      <br />
+
+      <canvas
+        id="myCanvas"
+        width="96"
+        height="16"
+        style="border: 1px dotted #000000; padding: 10px"
+      >
+      </canvas>
+
+      <form>
+        <input type="button" value="Make PNG" onclick="makePNG();" />
+      </form>
+
+      <div id="debug"></div>
+    </div>
+  </body>
+</html>

Translations/README.md

@@ -0,0 +1,11 @@
+### CJK Notes
+
+Unlike Latin and Cyrillic scripts, CJK Unified Ideographs cannot be legibly
+displayed using the small font, which is only 6x8px in size. Therefore, Hanzi,
+Kanji and Hanja can only be displayed using the 12x16px large font.
+
+By default, menu items are shown using two lines of text with the small font.
+When translating such items for CJK, leave the first line empty and put the
+translated text on the second line. This way, the firmware will automatically
+know to display the text using the large font. This also applies to the
+`SettingsResetMessage` text -- just start the message with `\n`.

Translations/TranslationEditor.html

@@ -0,0 +1,652 @@
+<!DOCTYPE html>
+<html>
+  <head>
+    <meta charset="UTF-8" />
+    <title>IronOS Translation Editor</title>
+    <script src="https://cdn.jsdelivr.net/npm/vue/dist/vue.js"></script>
+    <script src="translations_commons.js"></script>
+    <script src="translations_def.js"></script>
+    <script>
+      var app;
+      var defMap = {};
+
+      function save() {
+        saveJSON(
+          app.current,
+          "translation_" + app.current.languageCode + ".json"
+        );
+      }
+
+      function view() {
+        showJSON(
+          app.current,
+          "translation_" + app.current.languageCode + ".json"
+        );
+      }
+
+      function fileChanged(e) {
+        var target = e;
+        var id = target.id;
+
+        var file = target.files[0];
+        if (!file) {
+          return;
+        }
+        var fr = new FileReader();
+        fr.onload = function (e) {
+          try {
+            var json = JSON.parse(e.target.result);
+          } catch (ex) {
+            console.log(ex);
+            alert("Invalid JSON file: " + file.name);
+            return;
+          }
+
+          if (id == "referent-lang-file") {
+            if (checkTranslationFile(file.name)) {
+              app.referent = json;
+              app.meta.referentLoaded = true;
+            }
+          } else if (id == "current-lang-file") {
+            if (checkTranslationFile(file.name)) {
+              app.current = json;
+              if (!app.current.fonts) {
+                app.current.fonts = ["ascii_basic"];
+              }
+              app.meta.currentLoaded = true;
+            }
+          }
+          synchronizeData();
+        };
+        fr.readAsText(file);
+      }
+
+      function synchronizeData() {
+        app.obsolete = {};
+        copyMissing(
+          app.def.messages,
+          app.referent.messages,
+          app.current.messages
+        );
+        copyMissing(
+          app.def.characters,
+          app.referent.characters,
+          app.current.characters
+        );
+        copyMissing(
+          app.def.menuGroups,
+          app.referent.menuGroups,
+          app.current.menuGroups
+        );
+        copyMissing(
+          app.def.menuOptions,
+          app.referent.menuOptions,
+          app.current.menuOptions
+        );
+      }
+
+      /**
+       * Copy all missing properties from referent to current
+       * for each entry in definition
+       */
+      function copyMissing(defList, referentMap, currentMap) {
+        if (
+          !isDefined(defList) ||
+          !isDefined(referentMap) ||
+          !isDefined(currentMap)
+        ) {
+          return;
+        }
+        var len = defList.length;
+        for (var i = 0; i < len; i++) {
+          var id = defList[i].id;
+          if (!isDefined(referentMap[id])) {
+            referentMap[id] = "";
+          }
+          if (!isDefined(currentMap[id])) {
+            currentMap[id] = referentMap[id];
+          }
+        }
+        processObsolete(defList, currentMap);
+      }
+
+      // Passes through all entries from the given map.
+      // If a corresponding entry is not found in the defList, it is removed from the map, and added into the obsolete map.
+      function processObsolete(defList, map) {
+        // Index list to map for faster search
+        var defMap = copyArrayToMap(defList);
+        Object.keys(map).forEach(function (key) {
+          if (!isDefined(defMap[key])) {
+            app.obsolete[key] = { id: key, value: map[key] };
+            delete map[key];
+          }
+        });
+      }
+
+      function length(obj, mode) {
+        if (!isDefined(mode) || mode == 0) {
+          // return direct length
+          return obj.length;
+        }
+        // return the longest length in text2 array
+        return Math.max(
+          isDefinedNN(obj.text2[0]) ? obj.text2[0].length : 0,
+          isDefinedNN(obj.text2[1]) ? obj.text2[1].length : 0
+        );
+      }
+
+      function getAttribute(obj, attribute) {
+        var d = "2";
+        var v = obj[attribute + d];
+        if (isDefined(v)) return v;
+        return obj[attribute];
+      }
+
+      function loaded() {
+        app = new Vue({
+          el: "#app",
+          data: {
+            meta: {
+              referentLoaded: false,
+              currentLoaded: false,
+            },
+            def: {},
+            referent: {
+              messages: {},
+            },
+            current: {
+              loaded: false,
+            },
+            obsolete: {},
+            fontToAdd: "latin_extended",
+          },
+          methods: {
+            validateInput: function (valMap, id, mode) {
+              var d = defMap[id];
+              var vLen = 0;
+              if (!isDefined(mode)) mode = 0;
+
+              try {
+                // Sum for complex length
+                for (var i = 0; i < d.lenSum.fields.length; i++) {
+                  vLen += length(valMap[d.lenSum.fields[i]], mode);
+                }
+                d = d.lenSum;
+              } catch (e) {
+                // Single field length
+                vLen = length(valMap[id], mode);
+              }
+              var maxLen = getAttribute(d, "maxLen", mode == 2);
+              var minLen = getAttribute(d, "minLen", mode == 2);
+              var len = getAttribute(d, "len", mode == 2);
+              if (
+                (isNumber(maxLen) && vLen > maxLen) ||
+                (isNumber(minLen) && vLen < minLen) ||
+                (isNumber(len) && vLen != len)
+              ) {
+                return "invalid";
+              }
+            },
+
+            constraintString: function (e) {
+              var str = "";
+              var delim = "";
+              var v;
+              d = "2";
+              if (isDefinedNN(e.lenSum)) {
+                str =
+                  "len(" +
+                  (e.lenSum.fields + "").replace(/,/g, " + ") +
+                  ") -> ";
+                e = e.lenSum;
+              }
+              v = getAttribute(e, "len", d);
+              if (isNumber(v)) {
+                str += delim + "len=" + v;
+                delim = " and ";
+              }
+              v = getAttribute(e, "minLen", d);
+              if (isNumber(v)) {
+                str += delim + "len>=" + v;
+                delim = " and ";
+              }
+              v = getAttribute(e, "maxLen", d);
+              if (isNumber(v)) {
+                str += delim + "len<=" + v;
+                delim = " and ";
+              }
+              return str;
+            },
+
+            getWholeScreenMessageMaxLen: function (valMap, id, prop) {
+              var v = prop ? valMap[id][prop] : valMap[id];
+              var maxLen;
+              if (this.isSmall(v)) {
+                maxLen = defMap[id].maxLen2 || 16;
+              } else {
+                maxLen = defMap[id].maxLen || 8;
+              }
+              return maxLen;
+            },
+
+            validateWholeScreenMessage: function (valMap, id, prop) {
+              var v = prop ? valMap[id][prop] : valMap[id];
+              var maxLen = this.getWholeScreenMessageMaxLen(valMap, id, prop);
+              if (this.isSmall(v)) {
+                if (v[0].length === 0) {
+                  return "invalid";
+                } else if (Math.max(v[0].length, v[1].length) > maxLen) {
+                  return "invalid";
+                }
+              } else {
+                if (v.length > maxLen) {
+                  return "invalid";
+                }
+              }
+            },
+
+            constraintWholeScreenMessage: function (valMap, id, prop) {
+              return (
+                "len <= " + this.getWholeScreenMessageMaxLen(valMap, id, prop)
+              );
+            },
+
+            isSmall: function (v) {
+              return v instanceof Array;
+            },
+
+            convertToLarge: function (valMap, id, prop) {
+              var v = prop ? valMap[id][prop] : valMap[id];
+              var message = v[0] + (v[1] !== "" ? " " + v[1] : "");
+              if (prop) {
+                valMap[id][prop] = message;
+              } else {
+                valMap[id] = message;
+              }
+            },
+
+            convertToSmall: function (valMap, id, prop) {
+              var v = prop ? valMap[id][prop] : valMap[id];
+              var message = [v, ""];
+              if (prop) {
+                valMap[id][prop] = message;
+              } else {
+                valMap[id] = message;
+              }
+            },
+
+            removeFont: function (i) {
+              this.current.fonts.splice(i, 1);
+            },
+
+            addFont: function () {
+              this.current.fonts.push(this.fontToAdd);
+            },
+          },
+        });
+        app.def = def;
+        copyArrayToMap(app.def.messages, defMap);
+        copyArrayToMap(app.def.messagesWarn, defMap);
+        copyArrayToMap(app.def.characters, defMap);
+        copyArrayToMap(app.def.menuGroups, defMap);
+        copyArrayToMap(app.def.menuOptions, defMap);
+      }
+
+      window.onload = loaded;
+    </script>
+
+    <link href="translations.css" rel="stylesheet" type="text/css" />
+  </head>
+
+  <body>
+    <div id="app">
+      <h1>
+        IronOS Translation Editor<span v-if="meta.currentLoaded">
+          - {{ current.languageLocalName }} [{{current.languageCode}}]</span
+        >
+      </h1>
+      <table class="header data">
+        <tr>
+          <td class="label">Reference Language</td>
+          <td class="value">
+            <input
+              type="file"
+              id="referent-lang-file"
+              onchange="fileChanged(this)"
+              accept=".json"
+            />
+            <span class="selected" v-if="meta.referentLoaded"
+              >{{ referent.languageLocalName }}
+              [{{referent.languageCode}}]</span
+            >
+          </td>
+        </tr>
+        <tr v-if="meta.referentLoaded">
+          <td class="label">Current Language</td>
+          <td class="value">
+            <input
+              type="file"
+              id="current-lang-file"
+              onchange="fileChanged(this)"
+              accept=".json"
+            />
+            <span class="selected" v-if="meta.currentLoaded"
+              >{{ current.languageLocalName }} [{{current.languageCode}}]</span
+            >
+          </td>
+        </tr>
+        <tr v-if="meta.currentLoaded">
+          <td class="label">Local Language Code</td>
+          <td class="value">
+            <input
+              type="text"
+              v-model="current.languageCode"
+              maxlength="8"
+              v-on:change="current.languageCode=current.languageCode.toUpperCase()"
+              class="short"
+            />
+          </td>
+        </tr>
+        <tr v-if="meta.currentLoaded">
+          <td class="label">Local Language Name</td>
+          <td class="value">
+            <input
+              type="text"
+              v-model="current.languageLocalName"
+              class="short"
+            />
+          </td>
+        </tr>
+        <tr v-if="meta.currentLoaded">
+          <td class="label">
+            Font tables to use<br />("ascii_basic" must be first)
+          </td>
+          <td class="value">
+            <ul>
+              <li v-for="(font, i) in current.fonts">
+                <button
+                  type="button"
+                  @click="removeFont(i)"
+                  :disabled="i == 0 && font == 'ascii_basic'"
+                >
+                  -
+                </button>
+                {{ font }}
+              </li>
+            </ul>
+            <select v-model="fontToAdd">
+              <!-- <option value="ascii_basic">ascii_basic: ASCII Basic</option> -->
+              <option value="latin_extended">
+                latin_extended: Latin Extended
+              </option>
+              <option value="greek">greek: Greek Glyphs</option>
+              <option value="cyrillic">cyrillic: Cyrillic Glyphs</option>
+              <option value="cjk">cjk: Chinese/Japanese/Korean</option>
+            </select>
+            <button type="button" @click="addFont()">Add</button>
+          </td>
+        </tr>
+      </table>
+
+      <div v-if="def.messages && referent.messages && current.messages">
+        <div class="footer">
+          <input type="button" value="Save" onclick="save()" />
+          <input type="button" value="View" onclick="view()" />
+        </div>
+
+        <div v-if="Object.keys(obsolete).length > 0">
+          <h2>Obsolete</h2>
+          <table class="data">
+            <tr v-for="entry in obsolete">
+              <td class="label"><div class="stringId">{{entry.id}}</div></td>
+              <td class="value"><div class="ref">{{entry.value}}</div></td>
+            </tr>
+          </table>
+        </div>
+
+        <h2>Messages and Strings</h2>
+        <table class="data">
+          <tr
+            v-for="message in def.messages"
+            v-bind:class="validateInput(current.messages, message.id)"
+          >
+            <td class="label"><div class="stringId">{{message.id}}</div></td>
+            <td class="value">
+              <div class="constraint">{{constraintString(message)}}</div>
+              <div class="label">Description</div>
+              <div class="ref">{{message.description}}</div>
+              <div class="label">Reference</div>
+              <div class="ref">{{referent.messages[message.id]}}</div>
+              <div class="note" v-if="message.note">{{message.note}}</div>
+              <div class="tran">
+                <input
+                  :id="'in_'+message.id"
+                  type="text"
+                  v-model="current.messages[message.id]"
+                  v-bind:class="{unchanged : current.messages[message.id] == referent.messages[message.id], empty : current.messages[message.id]==''}"
+                />
+              </div>
+            </td>
+          </tr>
+        </table>
+
+        <h2>Warning Messages</h2>
+        <table class="data">
+          <tr
+            v-for="message in def.messagesWarn"
+            v-bind:class="validateWholeScreenMessage(current.messagesWarn, message.id)"
+          >
+            <td class="label"><div class="stringId">{{message.id}}</div></td>
+            <td class="value">
+              <div class="constraint">
+                {{constraintWholeScreenMessage(current.messagesWarn,
+                message.id)}}
+              </div>
+              <div class="label">Description</div>
+              <div class="ref">{{message.description}}</div>
+              <div class="label">Reference</div>
+              <div class="ref">{{referent.messagesWarn[message.id]}}</div>
+              <div class="note" v-if="message.note">{{message.note}}</div>
+              <div
+                class="tran"
+                v-if="isSmall(current.messagesWarn[message.id])"
+              >
+                <input
+                  :id="'in_'+message.id+'_0'"
+                  type="text"
+                  v-model="current.messagesWarn[message.id][0]"
+                  v-bind:class="{unchanged : current.messagesWarn[message.id][0] == referent.messagesWarn[message.id][0] && current.messagesWarn[message.id][1] == referent.messagesWarn[message.id][1], empty : current.messagesWarn[message.id][0] == '' && current.messagesWarn[message.id][1] == ''}"
+                />
+                <input
+                  :id="'in_'+message.id+'_1'"
+                  type="text"
+                  v-model="current.messagesWarn[message.id][1]"
+                  v-bind:class="{unchanged : current.messagesWarn[message.id][0] == referent.messagesWarn[message.id][0] && current.messagesWarn[message.id][1] == referent.messagesWarn[message.id][1], empty : current.messagesWarn[message.id][0] == '' && current.messagesWarn[message.id][1] == ''}"
+                />
+                <button
+                  type="button"
+                  @click="convertToLarge(current.messagesWarn, message.id)"
+                >
+                  Convert to large text
+                </button>
+              </div>
+              <div class="tran" v-else>
+                <input
+                  :id="'in_'+message.id"
+                  type="text"
+                  v-model="current.messagesWarn[message.id]"
+                  v-bind:class="{unchanged : current.messagesWarn[message.id] == referent.messagesWarn[message.id], empty : current.messagesWarn[message.id]==''}"
+                />
+                <button
+                  type="button"
+                  @click="convertToSmall(current.messagesWarn, message.id)"
+                >
+                  Convert to small text
+                </button>
+              </div>
+            </td>
+          </tr>
+        </table>
+
+        <h2>Characters</h2>
+        <table class="data">
+          <tr
+            v-for="char in def.characters"
+            v-bind:class="validateInput(current.characters, char.id)"
+          >
+            <td class="label"><div class="stringId">{{char.id}}</div></td>
+            <td class="value">
+              <div class="constraint">{{constraintString(char)}}</div>
+              <div class="label">Description</div>
+              <div class="ref">{{char.description}}</div>
+              <div class="label">Reference</div>
+              <div class="ref">{{referent.characters[char.id]}}</div>
+              <div class="tran">
+                <input
+                  type="text"
+                  v-model="current.characters[char.id]"
+                  v-bind:class="{unchanged : current.characters[char.id] == referent.characters[char.id], empty : current.characters[char.id].length != 1}"
+                />
+              </div>
+            </td>
+          </tr>
+        </table>
+
+        <h2>Menu Groups</h2>
+        <table class="data">
+          <tr
+            v-for="menu in def.menuGroups"
+            v-bind:class="validateWholeScreenMessage(current.menuGroups, menu.id, 'text2')"
+          >
+            <td class="label"><div class="stringId">{{menu.id}}</div></td>
+            <td class="value">
+              <div class="label">Menu Name</div>
+              <div class="constraint">
+                {{constraintWholeScreenMessage(current.menuGroups, menu.id,
+                'text2')}}
+              </div>
+              <div class="label">Description</div>
+              <div class="ref">{{menu.description}}</div>
+              <div class="label">Reference</div>
+              <div class="ref">{{referent.menuGroups[menu.id].text2}}</div>
+              <div
+                class="tran"
+                v-if="isSmall(current.menuGroups[menu.id].text2)"
+              >
+                <input
+                  type="text"
+                  v-model="current.menuGroups[menu.id].text2[0]"
+                  v-bind:class="{unchanged : current.menuGroups[menu.id].text2[0] == referent.menuGroups[menu.id].text2[0] && current.menuGroups[menu.id].text2[1] == referent.menuGroups[menu.id].text2[1], empty : current.menuGroups[menu.id].text2[0] == '' && current.menuGroups[menu.id].text2[1] == ''}"
+                />
+                <input
+                  type="text"
+                  v-model="current.menuGroups[menu.id].text2[1]"
+                  v-bind:class="{unchanged : current.menuGroups[menu.id].text2[0] == referent.menuGroups[menu.id].text2[0] && current.menuGroups[menu.id].text2[1] == referent.menuGroups[menu.id].text2[1], empty : current.menuGroups[menu.id].text2[0] == '' && current.menuGroups[menu.id].text2[1] == ''}"
+                />
+                <button
+                  type="button"
+                  @click="convertToLarge(current.menuGroups, menu.id, 'text2')"
+                >
+                  Convert to large text
+                </button>
+              </div>
+              <div class="tran" v-else>
+                <input
+                  type="text"
+                  v-model="current.menuGroups[menu.id].text2"
+                  v-bind:class="{unchanged : current.menuGroups[menu.id].text2 == referent.menuGroups[menu.id].text2, empty : current.menuGroups[menu.id].text2==''}"
+                />
+                <button
+                  type="button"
+                  @click="convertToSmall(current.menuGroups, menu.id, 'text2')"
+                >
+                  Convert to small text
+                </button>
+              </div>
+              <div class="label">Description</div>
+              <div class="ref">{{referent.menuGroups[menu.id].desc}}</div>
+              <div class="tran">
+                <input
+                  type="text"
+                  v-model="current.menuGroups[menu.id].desc"
+                  v-bind:class="{unchanged : current.menuGroups[menu.id].desc == referent.menuGroups[menu.id].desc, empty : current.menuGroups[menu.id].desc == ''}"
+                />
+              </div>
+            </td>
+          </tr>
+        </table>
+
+        <h2>Menu Options</h2>
+        <table class="data">
+          <tr
+            v-for="menu in def.menuOptions"
+            v-bind:class="validateWholeScreenMessage(current.menuOptions, menu.id, 'text2')"
+          >
+            <td class="label"><div class="stringId">{{menu.id}}</div></td>
+            <td class="value">
+              <div v-bind:class="{hidden : false}">
+                <div class="label">Menu Name</div>
+                <div class="constraint">
+                  {{constraintWholeScreenMessage(current.menuOptions, menu.id,
+                  'text2')}}
+                </div>
+                <div class="label">Description</div>
+                <div class="ref">{{menu.description}}</div>
+                <div class="label">Reference</div>
+                <div class="ref">{{referent.menuOptions[menu.id].text2}}</div>
+                <div
+                  class="tran"
+                  v-if="isSmall(current.menuOptions[menu.id].text2)"
+                >
+                  <input
+                    type="text"
+                    v-model="current.menuOptions[menu.id].text2[0]"
+                    v-bind:class="{unchanged : current.menuOptions[menu.id].text2[0] == referent.menuOptions[menu.id].text2[0] && current.menuOptions[menu.id].text2[1] == referent.menuOptions[menu.id].text2[1], empty : current.menuOptions[menu.id].text2[0] == '' && current.menuOptions[menu.id].text2[1] == ''}"
+                  />
+                  <input
+                    type="text"
+                    v-model="current.menuOptions[menu.id].text2[1]"
+                    v-bind:class="{unchanged : current.menuOptions[menu.id].text2[0] == referent.menuOptions[menu.id].text2[0] && current.menuOptions[menu.id].text2[1] == referent.menuOptions[menu.id].text2[1], empty : current.menuOptions[menu.id].text2[0] == '' && current.menuOptions[menu.id].text2[1] == ''}"
+                  />
+                  <button
+                    type="button"
+                    @click="convertToLarge(current.menuOptions, menu.id, 'text2')"
+                  >
+                    Convert to large text
+                  </button>
+                </div>
+                <div class="tran" v-else>
+                  <input
+                    type="text"
+                    v-model="current.menuOptions[menu.id].text2"
+                    v-bind:class="{unchanged : current.menuOptions[menu.id].text2 == referent.menuOptions[menu.id].text2, empty : current.menuOptions[menu.id].text2==''}"
+                  />
+                  <button
+                    type="button"
+                    @click="convertToSmall(current.menuOptions, menu.id, 'text2')"
+                  >
+                    Convert to small text
+                  </button>
+                </div>
+              </div>
+              <div class="label">Description</div>
+              <div class="ref">{{referent.menuOptions[menu.id].desc}}</div>
+              <div class="tran">
+                <input
+                  type="text"
+                  v-model="current.menuOptions[menu.id].desc"
+                  v-bind:class="{unchanged : current.menuOptions[menu.id].desc == referent.menuOptions[menu.id].desc, empty : current.menuOptions[menu.id].desc == ''}"
+                />
+              </div>
+            </td>
+          </tr>
+        </table>
+
+        <div class="footer">
+          <input type="button" value="Save" onclick="save()" />
+          <input type="button" value="View" onclick="view()" />
+        </div>
+      </div>
+    </div>
+  </body>
+</html>

Translations/TranslationsParser.html

@@ -0,0 +1,322 @@
+<!DOCTYPE html>
+<html>
+
+	<head>
+		<meta charset="UTF-8">
+		<title>TS100 Translation Parser</title>
+
+		<script src="https://cdn.jsdelivr.net/npm/vue/dist/vue.js"></script>
+		<script src="translations_commons.js"></script>
+		<script src="translations_def.js"></script>
+		<script>
+
+	var app;
+	var defMap = {};
+	var langMap = {};
+	var lang;
+
+	var defMsgMap;
+	var defCharMap; 	
+	var defGrpMap;	
+	var defOptMap;	
+	
+	function save(langCode){
+		saveJSON(langMap[langCode], "translation_"+langCode.toLowerCase()+".json");
+	}
+
+	function view(langCode){
+		showJSON(langMap[langCode], "translation_"+langCode.toLowerCase()+".json");
+	}
+
+	function translationFileSelected(e) {
+		var target = e;
+		var id = target.id;
+		
+		var file = target.files[0];
+		if (!file) {
+			return;
+		}
+		var fr = new FileReader();
+		fr.onload = function(e) {
+			parseTranslationFile(file.name, e.target.result);
+		}
+		fr.readAsText(file);
+		
+	}
+	
+	function parseTranslationFile(name, src) {
+		// remove multiline comments
+		src = src.replace(/\/\*[\s\S.]*?\*\//mg, "");
+		// remove single-line comments
+		src = src.replace(/\/\/.*/mg, "");
+		// remove empty lines
+		src = src.replace(/^\s*\n/gm, "");
+		
+		var langCode = "";
+		var srcLines = src.split("\n");
+
+		var reMessage = /const\s+char\s*\*\s+([\w\d]+)\s*=\s*"(.*)"/;
+		var reSettingsDescStart = /const\s+char\s*\*\s+SettingsDescriptions\[/;
+		var reSettingsNamesStart = /const\s+char\s*\*\s+SettingsShortNames\[/;
+		var reSettingsMenuDescStart = /const\s+char\s*\*\s+SettingsMenuEntriesDescriptions\[/;
+		var reChar = /const\s+char\s+([\w\d]+)\s*=\s*'(\w)'/;
+		var reMenuMode = /SettingsShortNameType\s*=\s*SHORT_NAME_(\w+)_LINE/;
+		
+		var reMenuStart = /\s*const\s+char\s*\*\s+SettingsMenuEntries\[/;
+
+//		var reString = /^\s*"(.*)"/;
+		var reString = /"(.*)"/;
+		var reSingleLine = /{\s*"(.*)"\s*}/;
+		var reDoubleLine = /{\s*"(.*)"\s*,\s*"(.*)"\s*}/;
+		
+		var mode = '';
+		var entryIndex = 0;
+		for (var li = 0; li < srcLines.length; li++) {
+			// trim lines
+			line = srcLines[li] = srcLines[li].trim();
+			
+			// if entering a new lang block
+			if (startsWith(line, "#ifdef LANG_")) {
+				mode = 'new-language';
+				langCode = line.substring(12);
+				lang = langMap[langCode];
+				// use existing or instantiate new
+				if (!isDefined(lang)) {
+					lang = {
+						languageCode: langCode,
+						cyrillicGlyphs: false,
+						messages: {},
+						characters: {},
+						menuGroups: {},
+						menuOptions: {}
+					};
+					langMap[langCode] = lang;
+					app.languages[app.languages.length] = langCode;
+				}
+				entryIndex = 0;
+				continue;
+			}
+
+			// Use Cyrillic glyphs
+			if (startsWith(line, "#define CYRILLIC_GLYPHS")) {
+				lang.cyrillicGlyphs = true;
+				entryIndex = 0;
+				continue;
+			}
+
+			// Menu type
+			reMenuMode.lastIndex = 0;
+			match = reMenuMode.exec(line);
+			if (match) {
+				entryIndex = 0;
+				continue;
+			}
+			
+			// Messages
+			reMessage.lastIndex = 0;
+			match = reMessage.exec(line);
+			if (match) {
+				lang.messages[match[1]] = xunescape(match[2]);
+				entryIndex = 0;
+				continue;
+			}
+			
+			// Chars descriptions
+			reChar.lastIndex = 0;
+			match = reChar.exec(line);
+			if (match) {
+				// found description block start
+				mode = 'char';
+				lang.characters[match[1]] = xunescape(match[2]);
+				entryIndex = 0;
+				continue;
+			}
+			// Settings descriptions
+			reSettingsDescStart.lastIndex = 0;
+			match = reSettingsDescStart.exec(line);
+			if (match) {
+				// found description block start
+				mode = 'settingsDesc';
+				entryIndex = 0;
+				continue;
+			}
+			reSettingsNamesStart.lastIndex = 0;
+			match = reSettingsNamesStart.exec(line);
+			if (match) {
+				// found description block start
+				mode = 'settingsNames';
+				entryIndex = 0;
+				continue;
+			}
+			reMenuStart.lastIndex = 0;
+			match = reMenuStart.exec(line);
+			if (match) {
+				// found description block start
+				mode = 'menu';
+				entryIndex = 0;
+				continue;
+			}
+			reSettingsMenuDescStart.lastIndex = 0;
+			match = reSettingsMenuDescStart.exec(line);
+			if (match) {
+				// found description block start
+				mode = 'menuDesc';
+				entryIndex = 0;
+				continue;
+			}
+			
+			if (mode == 'menu') {
+				// processing menu group names
+				reString.lastIndex = 0;
+				match = reString.exec(line);
+				if (match) {
+					// found description string
+					var entry = getMenuGroup(entryIndex);
+					var m = match[1].split("\\n");
+					entry.text2[0] = xunescape(m[0]);
+					entry.text2[1] = xunescape(m[1]);
+					entryIndex++;
+				}
+			} else if (mode == 'menuDesc') {
+				// processing menu group descriptions
+				reString.lastIndex = 0;
+				match = reString.exec(line);
+				if (match) {
+					// found description string
+					var entry = getMenuGroup(entryIndex);
+					entry.desc = xunescape(match[1]);
+					entryIndex++;
+				}
+			} else if (mode == 'settingsDesc') {
+				// processing option descriptions
+				reString.lastIndex = 0;
+				match = reString.exec(line);
+				if (match) {
+					// found description string
+					var entry = getMenuOption(entryIndex);
+					entry.desc = xunescape(match[1]);
+					entryIndex++;
+				}
+			} else if (mode == 'settingsNames') {
+				reDoubleLine.lastIndex = 0;
+				match = reDoubleLine.exec(line);
+				if (match) {
+					var entry = getMenuOption(entryIndex);
+					entry.text2[0] = xunescape(match[1]);
+					entry.text2[1] = xunescape(match[2]);
+					entryIndex++;
+				} else {
+					reSingleLine.lastIndex = 0;
+					match = reSingleLine.exec(line);
+					if (match) {
+						var entry = getMenuOption(entryIndex);
+						entry.text = xunescape(match[1]);
+						entryIndex++;
+					}
+
+				}
+			}
+		}
+		app.done = 1;
+	}
+
+	function getMenuOption(entryIndex) {
+		var optionDef = def.menuOptions[entryIndex];
+		if (!isDefined(optionDef)) {
+			var s = "Could not find menu option with index "+entryIndex;
+			alert(s);
+			throw s;
+		}
+		var id = optionDef.id;
+		var entry = lang.menuOptions[id];
+		if (!isDefined(entry)) {
+			entry =
+			{
+				"text2": ["", ""],
+				"desc": ""
+			}
+			lang.menuOptions[id] = entry;
+		}
+		return entry;
+	}
+	
+	function getMenuGroup(entryIndex) {
+		var optionDef = def.menuGroups[entryIndex];
+		if (!isDefined(optionDef)) {
+			var s = "Could not find menu group with index "+entryIndex;
+			alert(s);
+			throw s;
+		}
+		var id = optionDef.id;
+		var entry = lang.menuGroups[id];
+		if (!isDefined(entry)) {
+			entry =
+			{
+				"text2": ["", ""],
+				"desc": ""
+			}
+			lang.menuGroups[id] = entry;
+		}
+		return entry;
+	}
+	
+	function markSaved(lang) {
+		document.getElementById("row_"+lang).classList.add("saved");
+	}
+	
+	function loaded() {
+		app = new Vue({
+			el : '#app',
+			data : {
+				languages: [],
+				done : false,
+				def : {
+				}
+				
+			},
+			methods : {
+				vSave : function(lang) {
+					save(lang);
+					markSaved(lang);
+				},
+				vView : function(lang) {
+					view(lang);
+					markSaved(lang);
+				}
+			}
+		});
+		
+		app.def = def;
+		defMsgMap = copyArrayToMap(app.def.messages);
+		defCharMap = copyArrayToMap(app.def.characters);
+		defGrpMap = copyArrayToMap(app.def.menuGroups);
+		defOptMap = copyArrayToMap(app.def.menuOptions);
+	}
+
+	window.onload=loaded;
+</script>
+	<link href="translations.css" rel="stylesheet" type="text/css">
+	</head>
+	<body>
+
+		<div id="app">
+			<h1>TS100 Translation Parser</h1>
+			<table class="header data">
+				<tr>
+					<td class="label">Translation.cpp</td>
+					<td class="value">
+						<input type="file" id="translation-cpp-file" onchange="translationFileSelected(this)" accept=".cpp">
+					</td>
+				</tr>
+			</table>
+			
+			<div class="data" v-if="done">
+				<div class="value" v-for="lang in languages" :id="'row_'+lang">
+					<input type="button" :value="'Save '+lang" v-on:click="vSave(lang)">
+					<input type="button" :value="'View '+lang" v-on:click="vView(lang)">
+				</div>
+			</div>
+				
+		</div>
+	</body>
+</html>

Translations/brieflz.py

@@ -0,0 +1,189 @@
+import ctypes
+import functools
+import os
+from pathlib import Path
+
+HERE = Path(__file__).resolve().parent
+
+
+@functools.lru_cache(maxsize=None)
+def _libbrieflz():
+    so_path = os.path.join(HERE, "../source/Objects/host/brieflz/libbrieflz.so")
+    libbrieflz = ctypes.cdll.LoadLibrary(so_path)
+    return libbrieflz
+
+
+@functools.lru_cache(maxsize=None)
+def _fn_blz_max_packed_size():
+    """Returns the blz_max_packed_size C function.
+    ::
+
+        /**
+        * Get bound on compressed data size.
+        *
+        * @see blz_pack
+        *
+        * @param src_size number of bytes to compress
+        * @return maximum size of compressed data
+        */
+        BLZ_API size_t
+        blz_max_packed_size(size_t src_size);
+    """
+
+    fn = _libbrieflz().blz_max_packed_size
+    fn.argtype = [
+        ctypes.c_size_t,
+    ]
+    fn.restype = ctypes.c_size_t
+    return fn
+
+
+def blz_max_packed_size(src_size: int) -> int:
+    """Get bound on compressed data size."""
+    fn_blz_max_packed_size = _fn_blz_max_packed_size()
+    return int(fn_blz_max_packed_size(src_size))
+
+
+@functools.lru_cache(maxsize=None)
+def _fn_blz_workmem_size_level():
+    """Returns the blz_workmem_size_level C function.
+    ::
+
+        /**
+        * Get required size of `workmem` buffer.
+        *
+        * @see blz_pack_level
+        *
+        * @param src_size number of bytes to compress
+        * @param level compression level
+        * @return required size in bytes of `workmem` buffer
+        */
+        BLZ_API size_t
+        blz_workmem_size_level(size_t src_size, int level);
+    """
+
+    fn = _libbrieflz().blz_workmem_size_level
+    fn.argtype = [
+        ctypes.c_size_t,
+        ctypes.c_int,
+    ]
+    fn.restype = ctypes.c_size_t
+    return fn
+
+
+def blz_workmem_size_level(src_size: int, level: int) -> int:
+    """Get required size of `workmem` buffer."""
+    fn_blz_workmem_size_level = _fn_blz_workmem_size_level()
+    return int(fn_blz_workmem_size_level(src_size, level))
+
+
+@functools.lru_cache(maxsize=None)
+def _fn_blz_pack_level():
+    """Returns the blz_pack_level C function.
+    ::
+
+        /**
+        * Compress `src_size` bytes of data from `src` to `dst`.
+        *
+        * Compression levels between 1 and 9 offer a trade-off between
+        * time/space and ratio. Level 10 is optimal but very slow.
+        *
+        * @param src pointer to data
+        * @param dst pointer to where to place compressed data
+        * @param src_size number of bytes to compress
+        * @param workmem pointer to memory for temporary use
+        * @param level compression level
+        * @return size of compressed data
+        */
+        BLZ_API unsigned long
+        blz_pack_level(const void *src, void *dst, unsigned long src_size,
+                       void *workmem, int level);
+    """
+
+    fn = _libbrieflz().blz_pack_level
+    fn.argtype = [
+        ctypes.c_char_p,
+        ctypes.c_char_p,
+        ctypes.c_ulong,
+        ctypes.c_char_p,
+        ctypes.c_int,
+    ]
+    fn.restype = ctypes.c_ulong
+    return fn
+
+
+def compress(data: bytes) -> bytes:
+    """Returns a bytes object of the brieflz-compressed data."""
+
+    fn_blz_pack_level = _fn_blz_pack_level()
+
+    output_buffer_len = blz_max_packed_size(len(data))
+
+    src = data
+    dst = ctypes.create_string_buffer(output_buffer_len)
+    src_size = len(src)
+    workmem = ctypes.create_string_buffer(blz_workmem_size_level(len(data), 10))
+    level = 10
+
+    res = fn_blz_pack_level(src, dst, src_size, workmem, level)
+
+    if res == 0:
+        raise BriefLZError()
+    else:
+        return bytes(dst[:res])  # type: ignore
+
+
+@functools.lru_cache(maxsize=None)
+def _fn_blz_depack_srcsize():
+    """Returns the blz_depack_srcsize C function.
+    ::
+
+        /**
+        * Decompress `src_size` bytes of data from `src` to `dst`.
+        *
+        * This function is unsafe. If the provided data is malformed, it may
+        * read more than `src_size` from the `src` buffer.
+        *
+        * @param src pointer to compressed data
+        * @param dst pointer to where to place decompressed data
+        * @param src_size size of the compressed data
+        * @return size of decompressed data
+        */
+        BLZ_API unsigned long
+        blz_depack_srcsize(const void *src, void *dst, unsigned long src_size);
+    """
+
+    fn = _libbrieflz().blz_depack_srcsize
+    fn.argtype = [
+        ctypes.c_char_p,
+        ctypes.c_char_p,
+        ctypes.c_ulong,
+    ]
+    fn.restype = ctypes.c_ulong
+    return fn
+
+
+def depack_srcsize(data: bytes, expected_depack_size: int) -> bytes:
+    """Returns a bytes object of the uncompressed data."""
+
+    fn_blz_depack_srcsize = _fn_blz_depack_srcsize()
+
+    output_buffer_len = expected_depack_size * 2
+
+    src = data
+    dst = ctypes.create_string_buffer(output_buffer_len)
+    src_size = len(src)
+
+    res = fn_blz_depack_srcsize(src, dst, src_size)
+
+    if res == 0:
+        raise BriefLZError()
+    else:
+        return bytes(dst[:res])  # type: ignore
+
+
+class BriefLZError(Exception):
+    """Exception raised for brieflz compression or decompression error."""
+
+    def __init__(self):
+        pass

Translations/brieflz_test.py

@@ -0,0 +1,24 @@
+#!/usr/bin/env python3
+import brieflz
+import unittest
+
+
+TEST_DATA = (
+    b"Lorem ipsum dolor sit amet, consectetur adipiscing elit. "
+    b"Ut consequat mattis orci ac laoreet. Duis ac turpis tempus, varius lacus non, dignissim lectus. "
+    b"Curabitur quis metus luctus, sollicitudin ipsum at, dictum metus. "
+    b"Cras sed est nec ex tempor tincidunt in at ante. Vivamus laoreet urna eget lectus euismod feugiat. "
+    b"Duis a massa ac metus pellentesque interdum. Nunc congue, est faucibus convallis commodo, justo nibh sagittis augue, sed tristique urna neque vitae urna. "
+    b"Donec quis orci et purus imperdiet sollicitudin."
+)
+
+
+class TestBriefLZ(unittest.TestCase):
+    def test_roundtrip(self):
+        packed = brieflz.compress(TEST_DATA)
+        depacked = brieflz.depack_srcsize(packed, len(TEST_DATA))
+        self.assertEqual(depacked, TEST_DATA)
+
+
+if __name__ == "__main__":
+    unittest.main()

Translations/gen_menu_docs.py

@@ -0,0 +1,115 @@
+#!/usr/bin/env python3
+
+import argparse
+import functools
+import hashlib
+import json
+import logging
+import os
+import sys
+from dataclasses import dataclass
+from pathlib import Path
+from typing import Dict, List
+
+logging.basicConfig(stream=sys.stdout, level=logging.DEBUG)
+
+HERE = Path(__file__).resolve().parent
+TRANSLATION_DEFS_PATH = os.path.join(HERE, "translations_def.js")
+ENGLISH_TRANSLATION_PATH = os.path.join(HERE, "translation_EN.json")
+MENU_DOCS_FILE_PATH = os.path.join(HERE.parent, "Documentation/Settings.md")
+
+# Loading a single JSON file
+
+
+def load_json(filename: str, skip_first_line: bool) -> dict:
+    with open(filename) as f:
+        if skip_first_line:
+            f.readline()
+        return json.loads(f.read())
+
+
+def write_header(filep):
+    """
+    Writes the markdown constant header area out
+    """
+    constant_header = """<!-- This is an automatically generated file. DO NOT EDIT. Edit gen_menu_docs.py instead -->
+
+# IronOS Settings Menu
+
+The below breaks down the menu's and what each setting means.
+    """
+    filep.write(constant_header)
+
+
+def write_menu_categories(filep, defs, translation_data):
+    """
+    Writes the menu categories section out
+    """
+    menu_cat_pretense = """
+## Menu Categories
+
+In the menu there are a few main categories that are used to keep the list manageable.
+"""
+    filep.write(menu_cat_pretense)
+    for menu in defs.get("menuGroups", {}):
+        menu_id = menu.get("id", "")
+        entry = translation_data.get("menuGroups", {}).get(menu_id, "")
+        name = " ".join(entry.get("text2", []))
+        desc = menu.get("description", "")
+        section = f"""
+### Category: {name}
+
+{desc}
+"""
+        filep.write(section)
+
+
+def write_menu_entries(filep, defs, translation_data):
+    """
+    Writes the menu entries section out
+    """
+
+    menu_entries_pretense = """
+## Settings
+
+These are all of the settings possible in the menu.
+**Not all settings are visible for all devices.**
+For example, the TS100 does not have USB-PD settings.
+
+When using the device, if unsure you can pause (press nothing) on a setting and after a short delay help text will scroll across the screen.
+This is the "on device help text".
+"""
+    filep.write(menu_entries_pretense)
+    for menu in defs.get("menuOptions", {}):
+        menu_id = menu.get("id", "")
+        entry = translation_data.get("menuOptions", {}).get(menu_id, "")
+        name = " ".join(entry.get("text2", []))
+        desc = menu.get("description", "")
+        on_device_desc = entry.get("desc", "")
+        section = f"""
+### Setting: {name}
+
+{desc}
+
+On device help text:
+
+{on_device_desc}
+"""
+        filep.write(section)
+
+
+def main() -> None:
+    json_dir = HERE
+    print(json_dir)
+    logging.info("Loading translation definitions")
+    defs = load_json(TRANSLATION_DEFS_PATH, True)
+    eng_translation = load_json(ENGLISH_TRANSLATION_PATH, False)
+    with open(MENU_DOCS_FILE_PATH, "w") as outputf:
+        write_header(outputf)
+        write_menu_categories(outputf, defs, eng_translation)
+        write_menu_entries(outputf, defs, eng_translation)
+    logging.info("Done")
+
+
+if __name__ == "__main__":
+    main()

Translations/make_translation_test.py

@@ -0,0 +1,54 @@
+#!/usr/bin/env python3
+import json
+import os
+import unittest
+
+
+class TestMakeTranslation(unittest.TestCase):
+    def test_get_bytes_from_font_index(self):
+        from make_translation import get_bytes_from_font_index
+
+        self.assertEqual(get_bytes_from_font_index(2), b"\x02")
+        self.assertEqual(get_bytes_from_font_index(239), b"\xEF")
+        self.assertEqual(get_bytes_from_font_index(240), b"\xF0")
+        self.assertEqual(get_bytes_from_font_index(241), b"\xF1\x01")
+        self.assertEqual(get_bytes_from_font_index(495), b"\xF1\xFF")
+        self.assertEqual(get_bytes_from_font_index(496), b"\xF2\x01")
+        self.assertEqual(get_bytes_from_font_index(750), b"\xF2\xFF")
+        self.assertEqual(get_bytes_from_font_index(751), b"\xF3\x01")
+        self.assertEqual(get_bytes_from_font_index(0x10 * 0xFF - 15), b"\xFF\xFF")
+        with self.assertRaises(ValueError):
+            get_bytes_from_font_index(0x10 * 0xFF - 14)
+
+    def test_bytes_to_escaped(self):
+        from make_translation import bytes_to_escaped
+
+        self.assertEqual(bytes_to_escaped(b"\x00"), "\\x00")
+        self.assertEqual(bytes_to_escaped(b"\xF1\xAB"), "\\xF1\\xAB")
+
+    def test_bytes_to_c_hex(self):
+        from make_translation import bytes_to_c_hex
+
+        self.assertEqual(bytes_to_c_hex(b"\x00"), "0x00,")
+        self.assertEqual(bytes_to_c_hex(b"\xF1\xAB"), "0xF1, 0xAB,")
+
+    def test_no_language_id_collisions(self):
+        """
+        Asserting that we have no language collisions and that the has works ok
+        """
+        from make_translation import get_language_unqiue_id
+
+        seen_ids = []
+        for filename in os.listdir("."):
+            if filename.endswith(".json") and filename.startswith("translation_"):
+                with open(filename) as f:
+                    data = json.loads(f.read())
+                    lang_code = data.get("languageCode")
+                    self.assertNotEqual(lang_code, None)
+                    id = get_language_unqiue_id(lang_code)
+                    self.assertFalse(id in seen_ids)
+                    seen_ids.append(id)
+
+
+if __name__ == "__main__":
+    unittest.main()

Translations/objcopy.py

@@ -0,0 +1,25 @@
+import os
+import subprocess
+import tempfile
+
+
+if "OBJCOPY" in os.environ:
+    OBJCOPY = os.environ["OBJCOPY"]
+else:
+    OBJCOPY = "objcopy"
+
+
+def get_binary_from_obj(objfile_path: str, section_name: str) -> bytes:
+    tmpfd, tmpfile = tempfile.mkstemp()
+    result = subprocess.run(
+        [OBJCOPY, "-O", "binary", "-j", section_name, objfile_path, tmpfile]
+    )
+    result.check_returncode()
+    with open(tmpfd, "rb") as f:
+        bin: bytes = f.read()
+    os.remove(tmpfile)
+    return bin
+
+
+def cpp_var_to_section_name(var_name: str) -> str:
+    return f".rodata._ZL{len(var_name)}{var_name}"

Translations/translation_BE.json

@@ -0,0 +1,207 @@
+{
+  "languageCode": "BE",
+  "languageLocalName": "Беларуская",
+  "fonts": ["ascii_basic", "latin_extended", "cyrillic"],
+  "tempUnitFahrenheit": false,
+  "messages": {
+    "SettingsCalibrationWarning": "Перад тым, як працягнуць, каліласка, упэўнецеся, што джала мае комнатную тэмпературу!",
+    "SettingsResetWarning": "Вы ўпэннены, што жадаеце зкінуць налады да першапачатковых значэнняў?",
+    "UVLOWarningString": "НАПРУГА--",
+    "UndervoltageString": "Нізкая напруга",
+    "InputVoltageString": "Сілкаванне В: ",
+    "SleepingSimpleString": "Zzzz",
+    "SleepingAdvancedString": "Чаканне...",
+    "SleepingTipAdvancedString": "Джала:",
+    "OffString": "Выкл."
+  },
+  "messagesWarn": {
+    "ResetOKMessage": "Скід OK",
+    "SettingsResetMessage": ["Налады", "зкінуты!"],
+    "NoAccelerometerMessage": ["Ня вызначаны", "акселерометр!"],
+    "NoPowerDeliveryMessage": ["Няма USB-PD IC", "выяўлены!"],
+    "LockingKeysString": "ЗАМКНУТЫ",
+    "UnlockingKeysString": "АДЫМКНУТЫ",
+    "WarningKeysLockedString": "!ЗАМКНУТЫ!",
+    "WarningThermalRunaway": ["Цеплавы", "Уцякач"]
+  },
+  "characters": {
+    "SettingRightChar": "П",
+    "SettingLeftChar": "Л",
+    "SettingAutoChar": "А",
+    "SettingOffChar": "O",
+    "SettingSlowChar": "М",
+    "SettingMediumChar": "С",
+    "SettingFastChar": "Х",
+    "SettingStartNoneChar": "В",
+    "SettingStartSolderingChar": "П",
+    "SettingStartSleepChar": "Ч",
+    "SettingStartSleepOffChar": "К",
+    "SettingSensitivityOff": "А",
+    "SettingSensitivityLow": "Н",
+    "SettingSensitivityMedium": "С",
+    "SettingSensitivityHigh": "В",
+    "SettingLockDisableChar": "А",
+    "SettingLockBoostChar": "Т",
+    "SettingLockFullChar": "П"
+  },
+  "menuGroups": {
+    "PowerMenu": {
+      "text2": ["Налады", "сілкавання"],
+      "desc": "Крыніца сілкавання і мінімальная напруга на ячэйку"
+    },
+    "SolderingMenu": {
+      "text2": ["Налады", "пайкі"],
+      "desc": "Налады пайкі"
+    },
+    "PowerSavingMenu": {
+      "text2": ["Рэжымы", "сну"],
+      "desc": "Налады рэжыму чакання"
+    },
+    "UIMenu": {
+      "text2": ["Налады", "інтэрфейсу"],
+      "desc": "Карыстальніцкія налады знешняга выгляду"
+    },
+    "AdvancedMenu": {
+      "text2": ["Дадатковыя", "налады"],
+      "desc": "Дадатковыя налады"
+    }
+  },
+  "menuOptions": {
+    "DCInCutoff": {
+      "text2": ["Крыніца", "сілкавання"],
+      "desc": "Крыніца сілкавання. Усталюе напругу адсечкі. (DC 10В) (S 3,3В на ячэйку, без абмежавання магутнасці)"
+    },
+    "SleepTemperature": {
+      "text2": ["Тэмп.", "чакання"],
+      "desc": "Тэмпература рэжыму чакання"
+    },
+    "SleepTimeout": {
+      "text2": ["Таймаўт", "чакання"],
+      "desc": "Час да пераходу ў рэжым чакання (Хвіліны | Секунды)"
+    },
+    "ShutdownTimeout": {
+      "text2": ["Таймаут", "выключэння"],
+      "desc": "Час да адключэння паяльніка (Хвіліны)"
+    },
+    "MotionSensitivity": {
+      "text2": ["Адчувальнасць", "акселерометра"],
+      "desc": "Адчувальнасць акселерометра (0=Выкл. | 1=Мін. | ... | 9=Макс.)"
+    },
+    "TemperatureUnit": {
+      "text2": ["Адзінкі", "тэмпературы"],
+      "desc": "Адзінкі вымярэння тэмпературы (C=Цэльcія | F=Фарэнгейта)"
+    },
+    "AdvancedIdle": {
+      "text2": ["Падрабязны", "рэжым чакання"],
+      "desc": "Адлюстроўваць дэталёвую инфармацыю паменьшаным шрыфтом на экране чакання"
+    },
+    "DisplayRotation": {
+      "text2": ["Арыентацыя", "экрану"],
+      "desc": "Арыентацыя экрану (П=Правая рука | Л=Левая рука | А=Аўта)"
+    },
+    "BoostTemperature": {
+      "text2": ["t° турба", "рэжыму"],
+      "desc": "Тэмпература джала ў турба-рэжыме"
+    },
+    "AutoStart": {
+      "text2": ["Аўта", "старт"],
+      "desc": "Рэжым, у якім запускаецца паяльнік пры падачы сілкавання (В=Выкл. | П=Пайка | Ч=Чаканне | К=Чаканне пры комн. тэмп.)"
+    },
+    "CooldownBlink": {
+      "text2": ["Мігценне t°", "пры астуджэнні"],
+      "desc": "Міргаць тэмпературай на экране астуджэння, пакуль джага яшчэ гарачае"
+    },
+    "TemperatureCalibration": {
+      "text2": ["Каліброўка", "тэмпературы"],
+      "desc": "Каліброўка тэрмадатчыка джала"
+    },
+    "SettingsReset": {
+      "text2": ["Скід", "наладаў"],
+      "desc": "Скід наладаў да першапачатковых значэнняў"
+    },
+    "VoltageCalibration": {
+      "text2": ["Каліброўка", "напругі"],
+      "desc": "Каліброўка ўваходнай напругі (падоўжаны націск для выхаду)"
+    },
+    "AdvancedSoldering": {
+      "text2": ["Падрабязны", "экран пайкі"],
+      "desc": "Паказваць дэталёвую інформацыю на экране пайкі"
+    },
+    "ScrollingSpeed": {
+      "text2": ["Хуткацсь", "тексту"],
+      "desc": "Хуткасць гартання тэксту (М=марудна | Х=хутка)"
+    },
+    "QCMaxVoltage": {
+      "text2": ["Магутнасць", "сілкавання"],
+      "desc": "Магутнасць выкарыстоўваемай крыніцы сілкавання"
+    },
+    "PDNegTimeout": {
+      "text2": ["PD", "прыпынак"],
+      "desc": "Час чакання ўзгаднення PD з крокам 100 мс для сумяшчальнасці з некаторымі зараднымі зараднымі прыладамі QC (0: адключана)"
+    },
+    "PowerLimit": {
+      "text2": ["Межы", "магутнасці"],
+      "desc": "Максімальная магутнасць, якую можа выкарыстоўваць паяльнік (Ватт)"
+    },
+    "ReverseButtonTempChange": {
+      "text2": ["Інвертаваць", "кнопкі"],
+      "desc": "Інвертаваць кнопкі вымярэння тэмпературы"
+    },
+    "TempChangeShortStep": {
+      "text2": ["Крок тэмп.", "кар. нац."],
+      "desc": "Крок вымярэння тэмпературы пры кароткім націску кнопак"
+    },
+    "TempChangeLongStep": {
+      "text2": ["Крок тэмп.", "пад. нац."],
+      "desc": "Крок вымярэння тэмпературы пры падоўжаным націску кнопак"
+    },
+    "PowerPulsePower": {
+      "text2": ["Сіла імп.", "сілкав. Вт"],
+      "desc": "Сіла імпульса щтрымливаючага ад сну павербанку ці іншай крыніцы сілкавання"
+    },
+    "HallEffSensitivity": {
+      "text2": ["Эфект Хола", "адчувальнасць"],
+      "desc": "Узровень адчувальнасці датчыка хола ў рэжыме сну (0=Выкл. | 1=Мін. | ... | 9=Макс.)"
+    },
+    "LockingMode": {
+      "text2": ["Дазволіць", "блок. кнопак"],
+      "desc": "Пры рабоце падоўжаны націск дзьвух кнопак блакуе іх (А=Адключана | Т=Толькі турба | П=Поўная блакіроўка)"
+    },
+    "MinVolCell": {
+      "text2": ["Мін.", "напр."],
+      "desc": "Мінімальная дазволеная напруга на ячэйку (3S: 3 - 3,7V | 4S: 2,4 - 3,7V)"
+    },
+    "AnimLoop": {
+      "text2": ["Зацыкленая", "анімацыя"],
+      "desc": "Зацыкленая анімацыя гузікаў у галоўным меню"
+    },
+    "AnimSpeed": {
+      "text2": ["Хуткасць", "анімацыі"],
+      "desc": "Хуткасць анімацыі гузікаў у галоўным меню (Мілісекунды) (А=Адключана | Н=Нізкі | С=Сярэдні | В=Высокі)"
+    },
+    "PowerPulseWait": {
+      "text2": ["Імпульс магутнасці", "час чакання"],
+      "desc": "Час чакання перад запускам кожнага імпульсу няспання (x 2.5 с)"
+    },
+    "PowerPulseDuration": {
+      "text2": ["Імпульс магутнасці", "працягласць"],
+      "desc": "Працягласць імпульсу няспання (x 250 мс)"
+    },
+    "LanguageSwitch": {
+      "text2": ["Мова:", " BY     Беларуская"],
+      "desc": ""
+    },
+    "Brightness": {
+      "text2": ["Экран", "Яркасць"],
+      "desc": "Адрэгулюйце кантраснасць / яркасць OLED-экрана"
+    },
+    "ColourInversion": {
+      "text2": ["Экран", "Інвертаваць"],
+      "desc": "Інвертаваць колеры OLED-экрана"
+    },
+    "LOGOTime": {
+      "text2": ["Boot logo", "duration"],
+      "desc": "Sets the duration for the boot logo (s=seconds)"
+    }
+  }
+}

Translations/translation_BG.json

@@ -0,0 +1,207 @@
+{
+  "languageCode": "BG",
+  "languageLocalName": "Български",
+  "fonts": ["ascii_basic", "cyrillic"],
+  "tempUnitFahrenheit": false,
+  "messages": {
+    "SettingsCalibrationWarning": "Уверете се, че върха на поялника е със стайна температура преди да продължите!",
+    "SettingsResetWarning": "Сигурни ли сте, че искате да върнете фабричните настройки?",
+    "UVLOWarningString": "Ниско DC Напрежение",
+    "UndervoltageString": "Ниско Напрежение",
+    "InputVoltageString": "Входно V: ",
+    "SleepingSimpleString": "Сън",
+    "SleepingAdvancedString": "Хър Хър Хър...",
+    "SleepingTipAdvancedString": "Връх:",
+    "OffString": "Изкл."
+  },
+  "messagesWarn": {
+    "ResetOKMessage": "Нулиране",
+    "SettingsResetMessage": ["Настройките бяха", "нулирани!"],
+    "NoAccelerometerMessage": ["No accelerometer", "detected!"],
+    "NoPowerDeliveryMessage": ["No USB-PD IC", "detected!"],
+    "LockingKeysString": "LOCKED",
+    "UnlockingKeysString": "UNLOCKED",
+    "WarningKeysLockedString": "!LOCKED!",
+    "WarningThermalRunaway": ["Thermal", "Runaway"]
+  },
+  "characters": {
+    "SettingRightChar": "R",
+    "SettingLeftChar": "L",
+    "SettingAutoChar": "A",
+    "SettingOffChar": "O",
+    "SettingSlowChar": "S",
+    "SettingMediumChar": "M",
+    "SettingFastChar": "F",
+    "SettingStartNoneChar": "И",
+    "SettingStartSolderingChar": "Р",
+    "SettingStartSleepChar": "С",
+    "SettingStartSleepOffChar": "П",
+    "SettingSensitivityOff": "O",
+    "SettingSensitivityLow": "L",
+    "SettingSensitivityMedium": "M",
+    "SettingSensitivityHigh": "H",
+    "SettingLockDisableChar": "D",
+    "SettingLockBoostChar": "B",
+    "SettingLockFullChar": "F"
+  },
+  "menuGroups": {
+    "PowerMenu": {
+      "text2": ["Power", "settings"],
+      "desc": "Power settings"
+    },
+    "SolderingMenu": {
+      "text2": ["Поялник", "Настройки"],
+      "desc": "Настройки на поялника"
+    },
+    "PowerSavingMenu": {
+      "text2": ["Режими", "Настройки"],
+      "desc": "Настройки енергоспестяване"
+    },
+    "UIMenu": {
+      "text2": ["Интерфейс", "Настройки"],
+      "desc": "Настройки на интерфейса"
+    },
+    "AdvancedMenu": {
+      "text2": ["Разширени", "Настройки"],
+      "desc": "Допълнителни настройки"
+    }
+  },
+  "menuOptions": {
+    "DCInCutoff": {
+      "text2": ["Източник", "захранване"],
+      "desc": "Източник на захранване. Минимално напрежение. (DC 10V) (S 3,3V за клетка)"
+    },
+    "SleepTemperature": {
+      "text2": ["Темп.", "сън"],
+      "desc": "Температура при режим \"сън\" (C)"
+    },
+    "SleepTimeout": {
+      "text2": ["Време", "сън"],
+      "desc": "Включване в режим \"сън\" след: (Минути | Секунди)"
+    },
+    "ShutdownTimeout": {
+      "text2": ["Време", "изкл."],
+      "desc": "Изключване след (Минути)"
+    },
+    "MotionSensitivity": {
+      "text2": ["Усещане", "за движение"],
+      "desc": "Усещане за движение (0=Изключено | 1=Слабо | ... | 9=Силно)"
+    },
+    "TemperatureUnit": {
+      "text2": ["Единици за", "температура"],
+      "desc": "Единици за температура (C=Целзии | F=Фаренхайт)"
+    },
+    "AdvancedIdle": {
+      "text2": ["Детайлен", "екран в покой"],
+      "desc": "Покажи детайлна информация със ситен шрифт на екрана в режим на покой."
+    },
+    "DisplayRotation": {
+      "text2": ["Ориентация", "на дисплея"],
+      "desc": "Ориентация на дисплея (R=Дясна Ръка | L=Лява Ръка | A=Автоматично)"
+    },
+    "BoostTemperature": {
+      "text2": ["Турбо", "темп."],
+      "desc": "Температура за \"турбо\" режим"
+    },
+    "AutoStart": {
+      "text2": ["Автоматичен", "работен режим"],
+      "desc": "Режим на поялника при включване на захранването. (И=Изключен | Р=Работен | С=Сън | П=Сън температура помещение)"
+    },
+    "CooldownBlink": {
+      "text2": ["Мигай при", "топъл поялник"],
+      "desc": "След изключване от работен режим, индикатора за температура да мига докато човката на поялника все още е топла"
+    },
+    "TemperatureCalibration": {
+      "text2": ["Калибриране", "температура?"],
+      "desc": "Калибриране на температурата"
+    },
+    "SettingsReset": {
+      "text2": ["Фабрични", "настройки?"],
+      "desc": "Връщане на фабрични настройки"
+    },
+    "VoltageCalibration": {
+      "text2": ["Калибриране", "напрежение?"],
+      "desc": "Калибриране на входното напрежение. Задръжте бутонa за изход"
+    },
+    "AdvancedSoldering": {
+      "text2": ["Детайлен", "работен екран"],
+      "desc": "Детайлна информация в работен режим при запояване"
+    },
+    "ScrollingSpeed": {
+      "text2": ["Скорост", "на текста"],
+      "desc": "Скорост на движение на този текст"
+    },
+    "QCMaxVoltage": {
+      "text2": ["Мощност на", "захранване"],
+      "desc": "Мощност на избраното захранване"
+    },
+    "PDNegTimeout": {
+      "text2": ["PD", "timeout"],
+      "desc": "PD negotiation timeout in 100ms steps for compatibility with some QC chargers"
+    },
+    "PowerLimit": {
+      "text2": ["Лимит на", "мощност"],
+      "desc": "Максимална мощност на поялника (Watt)"
+    },
+    "ReverseButtonTempChange": {
+      "text2": ["Размяна", "бутони +-?"],
+      "desc": "Обръщане на бутоните \"+\" и \"-\" за промяна на температурата на върха на поялника"
+    },
+    "TempChangeShortStep": {
+      "text2": ["Промяна T", "бързо?"],
+      "desc": "Промяна на температура при бързо натискане на бутон!"
+    },
+    "TempChangeLongStep": {
+      "text2": ["Промяна Т", "задържане?"],
+      "desc": "Промяна на температура при задържане на бутон!"
+    },
+    "PowerPulsePower": {
+      "text2": ["Захранващ", "импулс"],
+      "desc": "Поддържане на интензивност на захранващия импулс"
+    },
+    "HallEffSensitivity": {
+      "text2": ["Hall sensor", "sensitivity"],
+      "desc": "Sensitivity of the Hall effect sensor to detect sleep (0=Изключено | 1=Слабо | ... | 9=Силно)"
+    },
+    "LockingMode": {
+      "text2": ["Allow locking", "buttons"],
+      "desc": "While soldering, hold down both buttons to toggle locking them (D=disable | B=boost mode only | F=full locking)"
+    },
+    "MinVolCell": {
+      "text2": ["Minimum", "voltage"],
+      "desc": "Minimum allowed voltage per cell (3S: 3 - 3,7V | 4-6S: 2,4 - 3,7V)"
+    },
+    "AnimLoop": {
+      "text2": ["Anim.", "loop"],
+      "desc": "Loop icon animations in main menu"
+    },
+    "AnimSpeed": {
+      "text2": ["Anim.", "speed"],
+      "desc": "Pace of icon animations in menu (O=off | S=slow | M=medium | F=fast)"
+    },
+    "PowerPulseWait": {
+      "text2": ["Power pulse", "delay"],
+      "desc": "Delay before keep-awake-pulse is triggered (x 2,5с)"
+    },
+    "PowerPulseDuration": {
+      "text2": ["Power pulse", "duration"],
+      "desc": "Keep-awake-pulse duration (x 250мс)"
+    },
+    "LanguageSwitch": {
+      "text2": ["Език:", " BG   Български"],
+      "desc": ""
+    },
+    "Brightness": {
+      "text2": ["Screen", "brightness"],
+      "desc": "Adjust the brightness of the OLED screen"
+    },
+    "ColourInversion": {
+      "text2": ["Invert", "screen"],
+      "desc": "Invert the colours of the OLED screen"
+    },
+    "LOGOTime": {
+      "text2": ["Boot logo", "duration"],
+      "desc": "Sets the duration for the boot logo (s=seconds)"
+    }
+  }
+}

Translations/translation_CS.json

@@ -0,0 +1,207 @@
+{
+  "languageCode": "CS",
+  "languageLocalName": "Český",
+  "fonts": ["ascii_basic", "latin_extended"],
+  "tempUnitFahrenheit": false,
+  "messages": {
+    "SettingsCalibrationWarning": "Ujistěte se, že hrot má pokojovou teplotu!",
+    "SettingsResetWarning": "Opravdu chcete resetovat zařízení do továrního nastavení?",
+    "UVLOWarningString": "Nízké DC",
+    "UndervoltageString": "! Nízké napětí !",
+    "InputVoltageString": "Napětí: ",
+    "SleepingSimpleString": "Zzz ",
+    "SleepingAdvancedString": "Režim spánku...",
+    "SleepingTipAdvancedString": "Hrot:",
+    "OffString": "Vyp"
+  },
+  "messagesWarn": {
+    "ResetOKMessage": "Reset OK",
+    "SettingsResetMessage": ["Tov. nas. obnov.", ""],
+    "NoAccelerometerMessage": ["No accelerometer", "detected!"],
+    "NoPowerDeliveryMessage": ["No USB-PD IC", "detected!"],
+    "LockingKeysString": "LOCKED",
+    "UnlockingKeysString": "UNLOCKED",
+    "WarningKeysLockedString": "!LOCKED!",
+    "WarningThermalRunaway": ["Thermal", "Runaway"]
+  },
+  "characters": {
+    "SettingRightChar": "P",
+    "SettingLeftChar": "L",
+    "SettingAutoChar": "A",
+    "SettingOffChar": "O",
+    "SettingSlowChar": "P",
+    "SettingMediumChar": "M",
+    "SettingFastChar": "R",
+    "SettingStartNoneChar": "O",
+    "SettingStartSolderingChar": "P",
+    "SettingStartSleepChar": "S",
+    "SettingStartSleepOffChar": "M",
+    "SettingSensitivityOff": "O",
+    "SettingSensitivityLow": "L",
+    "SettingSensitivityMedium": "M",
+    "SettingSensitivityHigh": "H",
+    "SettingLockDisableChar": "D",
+    "SettingLockBoostChar": "B",
+    "SettingLockFullChar": "F"
+  },
+  "menuGroups": {
+    "PowerMenu": {
+      "text2": ["Power", "settings"],
+      "desc": "Power settings"
+    },
+    "SolderingMenu": {
+      "text2": ["Pájecí", "nastavení"],
+      "desc": "Nastavení pájení (boost, auto start...)."
+    },
+    "PowerSavingMenu": {
+      "text2": ["Režim", "spánku"],
+      "desc": "Nastavení režimu spánku, automatického vypnutí..."
+    },
+    "UIMenu": {
+      "text2": ["Uživatelské", "rozhraní"],
+      "desc": "Nastavení uživatelského rozhraní."
+    },
+    "AdvancedMenu": {
+      "text2": ["Pokročilé", "volby"],
+      "desc": "Pokročilé volby (detailní obrazovky, kalibrace, tovární nastavení...)."
+    }
+  },
+  "menuOptions": {
+    "DCInCutoff": {
+      "text2": ["Zdroj", "napájení"],
+      "desc": "Při nižším napětí ukončí pájení (DC=10V | ?S=?x3,3V pro LiPo, LiIon...)."
+    },
+    "SleepTemperature": {
+      "text2": ["Teplota v", "r. spánku"],
+      "desc": "Teplota v režimu spánku."
+    },
+    "SleepTimeout": {
+      "text2": ["Čas do", "r. spánku"],
+      "desc": "Čas do režimu spánku (Minut | Sekund)."
+    },
+    "ShutdownTimeout": {
+      "text2": ["Čas do", "vypnutí"],
+      "desc": "Čas do automatického vypnutí (Minut)."
+    },
+    "MotionSensitivity": {
+      "text2": ["Citlivost", "det. pohybu"],
+      "desc": "Citlivost detekce pohybu (0=Vyp | 1=Min | ... | 9=Max)."
+    },
+    "TemperatureUnit": {
+      "text2": ["Jednotky", "teploty"],
+      "desc": "Jednotky měření teploty (C=Celsius | F=Fahrenheit)."
+    },
+    "AdvancedIdle": {
+      "text2": ["Podrobnosti", "na vých. obr."],
+      "desc": "Zobrazit podrobnosti na výchozí obrazovce?"
+    },
+    "DisplayRotation": {
+      "text2": ["Orientace", "obrazovky"],
+      "desc": "Orientace obrazovky (P=Pravák | L=Levák | A=Auto)."
+    },
+    "BoostTemperature": {
+      "text2": ["Teplota v", "r. boost"],
+      "desc": "Teplota v režimu boost."
+    },
+    "AutoStart": {
+      "text2": ["Automatický", "start"],
+      "desc": "Při startu ihned nahřát hrot? (O=Pryč | P=Pájení | S=Spát | M=Spát teplota místnosti)"
+    },
+    "CooldownBlink": {
+      "text2": ["Blikáni při", "chladnutí"],
+      "desc": "Blikání teploty při chladnutí, dokud je hrot horký?"
+    },
+    "TemperatureCalibration": {
+      "text2": ["Kalibrovat", "teplotu?"],
+      "desc": "Kalibrace měření teploty."
+    },
+    "SettingsReset": {
+      "text2": ["Tovární", "nastavení?"],
+      "desc": "Obnovení továrního nastavení."
+    },
+    "VoltageCalibration": {
+      "text2": ["Kalibrovat", "vstupní napětí?"],
+      "desc": "Kalibrace vstupního napětí. Tlačítky uprav, podržením potvrď."
+    },
+    "AdvancedSoldering": {
+      "text2": ["Podrobnosti", "při pájení"],
+      "desc": "Zobrazit podrobnosti při pájení?"
+    },
+    "ScrollingSpeed": {
+      "text2": ["Rychlost", "popisků"],
+      "desc": "Rychlost posuvu popisků podobných tomuto (P=Pomalu | R=Rychle)"
+    },
+    "QCMaxVoltage": {
+      "text2": ["Výkon", "ve wattech"],
+      "desc": "Výkon použítého napájecího adaptéru ve wattech."
+    },
+    "PDNegTimeout": {
+      "text2": ["PD", "timeout"],
+      "desc": "PD negotiation timeout in 100ms steps for compatibility with some QC chargers (0: disabled)"
+    },
+    "PowerLimit": {
+      "text2": ["Omezení", "Výkonu"],
+      "desc": "Maximální příkon (Watty)"
+    },
+    "ReverseButtonTempChange": {
+      "text2": ["Prohodit", "tl. +-?"],
+      "desc": "Prohodí tlačítka plus a minus pro změnu teploty hrotu."
+    },
+    "TempChangeShortStep": {
+      "text2": ["Krok teploty", "krátký?"],
+      "desc": "Velikost skoku při změně teploty krátkým stiskem tlačítka!"
+    },
+    "TempChangeLongStep": {
+      "text2": ["Krok teploty", "dlouhý?"],
+      "desc": "Velikost skoku při změně teploty dlouhým stiskem tlačítka!"
+    },
+    "PowerPulsePower": {
+      "text2": ["Intenzita", "Výkon. pulsu"],
+      "desc": "Puls pro udržení zařízení v chodu (kvůli power bankám)."
+    },
+    "HallEffSensitivity": {
+      "text2": ["Hall sensor", "sensitivity"],
+      "desc": "Sensitivity of the Hall effect sensor to detect sleep (0=Vyp | 1=Min | ... | 9=Max)"
+    },
+    "LockingMode": {
+      "text2": ["Allow locking", "buttons"],
+      "desc": "While soldering, hold down both buttons to toggle locking them (D=disable | B=boost mode only | F=full locking)"
+    },
+    "MinVolCell": {
+      "text2": ["Minimum", "voltage"],
+      "desc": "Minimum allowed voltage per cell (3S: 3 - 3,7V | 4-6S: 2,4 - 3,7V)"
+    },
+    "AnimLoop": {
+      "text2": ["Anim.", "loop"],
+      "desc": "Loop icon animations in main menu"
+    },
+    "AnimSpeed": {
+      "text2": ["Anim.", "speed"],
+      "desc": "Pace of icon animations in menu (O=off | P=slow | M=medium | R=fast)"
+    },
+    "PowerPulseWait": {
+      "text2": ["Power pulse", "delay"],
+      "desc": "Delay before keep-awake-pulse is triggered (x 2,5s)"
+    },
+    "PowerPulseDuration": {
+      "text2": ["Power pulse", "duration"],
+      "desc": "Keep-awake-pulse duration (x 250ms)"
+    },
+    "LanguageSwitch": {
+      "text2": ["Řeč:", " CS       Český"],
+      "desc": ""
+    },
+    "Brightness": {
+      "text2": ["Screen", "brightness"],
+      "desc": "Adjust the brightness of the OLED screen"
+    },
+    "ColourInversion": {
+      "text2": ["Invert", "screen"],
+      "desc": "Invert the colours of the OLED screen"
+    },
+    "LOGOTime": {
+      "text2": ["Boot logo", "duration"],
+      "desc": "Sets the duration for the boot logo (s=seconds)"
+    }
+  }
+}

Translations/translation_DA.json

@@ -0,0 +1,207 @@
+{
+  "languageCode": "DA",
+  "languageLocalName": "Dansk",
+  "fonts": ["ascii_basic", "latin_extended"],
+  "tempUnitFahrenheit": false,
+  "messages": {
+    "SettingsCalibrationWarning": "Sørg for at loddespidsen er ved stuetemperatur, inden du fortsætter!",
+    "SettingsResetWarning": "Are you sure to reset settings to default values?",
+    "UVLOWarningString": "Lav Volt",
+    "UndervoltageString": "Undervoltage",
+    "InputVoltageString": "Input V: ",
+    "SleepingSimpleString": "Zzzz",
+    "SleepingAdvancedString": "Dvale...",
+    "SleepingTipAdvancedString": "Tip:",
+    "OffString": "Off"
+  },
+  "messagesWarn": {
+    "ResetOKMessage": "Reset OK",
+    "SettingsResetMessage": ["Certain settings", "were changed!"],
+    "NoAccelerometerMessage": ["No accelerometer", "detected!"],
+    "NoPowerDeliveryMessage": ["No USB-PD IC", "detected!"],
+    "LockingKeysString": "LOCKED",
+    "UnlockingKeysString": "UNLOCKED",
+    "WarningKeysLockedString": "!LOCKED!",
+    "WarningThermalRunaway": ["Thermal", "Runaway"]
+  },
+  "characters": {
+    "SettingRightChar": "H",
+    "SettingLeftChar": "V",
+    "SettingAutoChar": "A",
+    "SettingOffChar": "O",
+    "SettingSlowChar": "S",
+    "SettingMediumChar": "M",
+    "SettingFastChar": "F",
+    "SettingStartNoneChar": "S",
+    "SettingStartSolderingChar": "L",
+    "SettingStartSleepChar": "D",
+    "SettingStartSleepOffChar": "R",
+    "SettingSensitivityOff": "O",
+    "SettingSensitivityLow": "L",
+    "SettingSensitivityMedium": "M",
+    "SettingSensitivityHigh": "H",
+    "SettingLockDisableChar": "D",
+    "SettingLockBoostChar": "B",
+    "SettingLockFullChar": "F"
+  },
+  "menuGroups": {
+    "PowerMenu": {
+      "text2": ["Power", "settings"],
+      "desc": "Power settings"
+    },
+    "SolderingMenu": {
+      "text2": ["Soldering", "settings"],
+      "desc": "Soldering settings"
+    },
+    "PowerSavingMenu": {
+      "text2": ["Sleep", "mode"],
+      "desc": "Power saving settings"
+    },
+    "UIMenu": {
+      "text2": ["User", "interface"],
+      "desc": "User interface settings"
+    },
+    "AdvancedMenu": {
+      "text2": ["Advanced", "settings"],
+      "desc": "Advanced settings"
+    }
+  },
+  "menuOptions": {
+    "DCInCutoff": {
+      "text2": ["Power", "source"],
+      "desc": "Strømforsyning. Indstil Cutoff Spændingen. (DC 10V) (S 3,3V per cell)"
+    },
+    "SleepTemperature": {
+      "text2": ["Sleep", "temp"],
+      "desc": "Dvale Temperatur (C)"
+    },
+    "SleepTimeout": {
+      "text2": ["Sleep", "timeout"],
+      "desc": "Dvale Timeout (Minutter | Sekunder)"
+    },
+    "ShutdownTimeout": {
+      "text2": ["Shutdown", "timeout"],
+      "desc": "sluknings Timeout (Minutter)"
+    },
+    "MotionSensitivity": {
+      "text2": ["Motion", "sensitivity"],
+      "desc": "Bevægelsesfølsomhed (0=Slukket | 1=Mindst følsom | ... | 9=Mest følsom)"
+    },
+    "TemperatureUnit": {
+      "text2": ["Temperature", "unit"],
+      "desc": "Temperatur Enhed (C=Celsius | F=Fahrenheit)"
+    },
+    "AdvancedIdle": {
+      "text2": ["Detailed", "idle screen"],
+      "desc": "Vis detialieret information med en mindre skriftstørrelse på standby skærmen."
+    },
+    "DisplayRotation": {
+      "text2": ["Display", "orientation"],
+      "desc": "Skærm Orientering (H=Højre Håndet | V=Venstre Håndet | A=Automatisk)"
+    },
+    "BoostTemperature": {
+      "text2": ["Boost", "temp"],
+      "desc": "Temperatur i \"boost\" mode"
+    },
+    "AutoStart": {
+      "text2": ["Start-up", "behavior"],
+      "desc": "Start automatisk med lodning når strøm sættes til. (S=Slukket | L=Lodning | D=Dvale tilstand | R=Dvale tilstand rumtemperatur)"
+    },
+    "CooldownBlink": {
+      "text2": ["Cooldown", "flashing"],
+      "desc": "Blink temperaturen på skærmen, mens spidsen stadig er varm."
+    },
+    "TemperatureCalibration": {
+      "text2": ["Calibrate", "temperature?"],
+      "desc": "kalibrere spids temperatur."
+    },
+    "SettingsReset": {
+      "text2": ["Restore factory", "settings?"],
+      "desc": "Gendan alle indstillinger"
+    },
+    "VoltageCalibration": {
+      "text2": ["Calibrate", "input voltage?"],
+      "desc": "VIN kalibrering. Knapperne justere, Lang tryk for at gå ud"
+    },
+    "AdvancedSoldering": {
+      "text2": ["Detailed", "solder screen"],
+      "desc": "Vis detialieret information mens der loddes"
+    },
+    "ScrollingSpeed": {
+      "text2": ["Scrolling", "speed"],
+      "desc": "Speed info text scrolls past at (S=slow | F=fast)"
+    },
+    "QCMaxVoltage": {
+      "text2": ["QC", "voltage"],
+      "desc": "Max QC voltage the iron should negotiate for"
+    },
+    "PDNegTimeout": {
+      "text2": ["PD", "timeout"],
+      "desc": "PD negotiation timeout in 100ms steps for compatibility with some QC chargers (0: disabled)"
+    },
+    "PowerLimit": {
+      "text2": ["Power", "limit"],
+      "desc": "Maximum power the iron can use (W=watt)"
+    },
+    "ReverseButtonTempChange": {
+      "text2": ["Swap", "+ - keys"],
+      "desc": "Reverse assignment of buttons for temperature adjustment"
+    },
+    "TempChangeShortStep": {
+      "text2": ["Temp change", "short"],
+      "desc": "Temperature-change-increment on short button press"
+    },
+    "TempChangeLongStep": {
+      "text2": ["Temp change", "long"],
+      "desc": "Temperature-change-increment on long button press"
+    },
+    "PowerPulsePower": {
+      "text2": ["Power", "pulse"],
+      "desc": "Intensity of power of keep-awake-pulse (watt)"
+    },
+    "HallEffSensitivity": {
+      "text2": ["Hall sensor", "sensitivity"],
+      "desc": "Sensitivity of the Hall effect sensor to detect sleep (0=Slukket | 1=Mindst følsom | ... | 9=Mest følsom)"
+    },
+    "LockingMode": {
+      "text2": ["Allow locking", "buttons"],
+      "desc": "While soldering, hold down both buttons to toggle locking them (D=disable | B=boost mode only | F=full locking)"
+    },
+    "MinVolCell": {
+      "text2": ["Minimum", "voltage"],
+      "desc": "Minimum allowed voltage per cell (3S: 3 - 3,7V | 4-6S: 2,4 - 3,7V)"
+    },
+    "AnimLoop": {
+      "text2": ["Anim.", "loop"],
+      "desc": "Loop icon animations in main menu"
+    },
+    "AnimSpeed": {
+      "text2": ["Anim.", "speed"],
+      "desc": "Pace of icon animations in menu (O=off | S=slow | M=medium | F=fast)"
+    },
+    "PowerPulseWait": {
+      "text2": ["Power pulse", "delay"],
+      "desc": "Delay before keep-awake-pulse is triggered (x 2,5s)"
+    },
+    "PowerPulseDuration": {
+      "text2": ["Power pulse", "duration"],
+      "desc": "Keep-awake-pulse duration (x 250ms)"
+    },
+    "LanguageSwitch": {
+      "text2": ["Sprog :", " DA       Dansk"],
+      "desc": ""
+    },
+    "Brightness": {
+      "text2": ["Screen", "brightness"],
+      "desc": "Adjust the brightness of the OLED screen"
+    },
+    "ColourInversion": {
+      "text2": ["Invert", "screen"],
+      "desc": "Invert the colours of the OLED screen"
+    },
+    "LOGOTime": {
+      "text2": ["Boot logo", "duration"],
+      "desc": "Sets the duration for the boot logo (s=seconds)"
+    }
+  }
+}

Translations/translation_DE.json

@@ -0,0 +1,207 @@
+{
+  "languageCode": "DE",
+  "languageLocalName": "Deutsch",
+  "fonts": ["ascii_basic", "latin_extended"],
+  "tempUnitFahrenheit": false,
+  "messages": {
+    "SettingsCalibrationWarning": "Vor dem Fortfahren muss die Lötspitze vollständig abgekühlt sein!",
+    "SettingsResetWarning": "Sicher, dass alle Werte zurückgesetzt werden sollen?",
+    "UVLOWarningString": "V niedr.",
+    "UndervoltageString": "Unterspannung",
+    "InputVoltageString": "V Eingang: ",
+    "SleepingSimpleString": "Zzzz",
+    "SleepingAdvancedString": "Ruhemodus...",
+    "SleepingTipAdvancedString": "Temp:",
+    "OffString": "Aus"
+  },
+  "messagesWarn": {
+    "ResetOKMessage": "Reset OK",
+    "SettingsResetMessage": ["Einstellungen", "zurückgesetzt!"],
+    "NoAccelerometerMessage": ["Bewegungssensor", "nicht erkannt!"],
+    "NoPowerDeliveryMessage": ["USB-PD IC", "nicht erkannt!"],
+    "LockingKeysString": "GESPERRT",
+    "UnlockingKeysString": "ENTSPERRT",
+    "WarningKeysLockedString": "!GESPERRT!",
+    "WarningThermalRunaway": ["Thermal", "Runaway"]
+  },
+  "characters": {
+    "SettingRightChar": "R",
+    "SettingLeftChar": "L",
+    "SettingAutoChar": "A",
+    "SettingOffChar": "A",
+    "SettingSlowChar": "L",
+    "SettingMediumChar": "M",
+    "SettingFastChar": "S",
+    "SettingStartNoneChar": "A",
+    "SettingStartSolderingChar": "L",
+    "SettingStartSleepChar": "R",
+    "SettingStartSleepOffChar": "K",
+    "SettingSensitivityOff": "A",
+    "SettingSensitivityLow": "N",
+    "SettingSensitivityMedium": "M",
+    "SettingSensitivityHigh": "H",
+    "SettingLockDisableChar": "A",
+    "SettingLockBoostChar": "B",
+    "SettingLockFullChar": "V"
+  },
+  "menuGroups": {
+    "PowerMenu": {
+      "text2": ["Energie-", "einstellungen"],
+      "desc": "Energieeinstellungen"
+    },
+    "SolderingMenu": {
+      "text2": ["Löt-", "einstellungen"],
+      "desc": "Löteinstellungen"
+    },
+    "PowerSavingMenu": {
+      "text2": ["Ruhe-", "modus"],
+      "desc": "Energiespareinstellungen"
+    },
+    "UIMenu": {
+      "text2": ["Anzeige-", "einstellungen"],
+      "desc": "Menüeinstellungen"
+    },
+    "AdvancedMenu": {
+      "text2": ["Erweiterte", "Einstellungen"],
+      "desc": "Erweiterte Einstellungen"
+    }
+  },
+  "menuOptions": {
+    "DCInCutoff": {
+      "text2": ["Spannungs-", "quelle"],
+      "desc": "Spannungsquelle (Abschaltspannung) (DC=10V | nS=n*3.3V für n LiIon-Zellen)"
+    },
+    "SleepTemperature": {
+      "text2": ["Ruhe-", "temperatur"],
+      "desc": "Ruhetemperatur der Spitze"
+    },
+    "SleepTimeout": {
+      "text2": ["Ruhever-", "zögerung"],
+      "desc": "Dauer vor Übergang in den Ruhemodus (s=Sekunden | m=Minuten)"
+    },
+    "ShutdownTimeout": {
+      "text2": ["Abschalt-", "verzög."],
+      "desc": "Dauer vor automatischer Abschaltung (m=Minuten)"
+    },
+    "MotionSensitivity": {
+      "text2": ["Bewegungs-", "empfindlichk."],
+      "desc": "0=aus | 1=minimal | ... | 9=maximal"
+    },
+    "TemperatureUnit": {
+      "text2": ["Temperatur-", "einheit"],
+      "desc": "C=Celsius | F=Fahrenheit"
+    },
+    "AdvancedIdle": {
+      "text2": ["Detaillierte", "Ruheansicht"],
+      "desc": "Detaillierte Anzeige im Ruhemodus"
+    },
+    "DisplayRotation": {
+      "text2": ["Anzeige-", "ausrichtung"],
+      "desc": "R=rechtshändig | L=linkshändig | A=automatisch"
+    },
+    "BoostTemperature": {
+      "text2": ["Boost-", "temperatur"],
+      "desc": "Temperatur der Lötspitze im Boostmodus"
+    },
+    "AutoStart": {
+      "text2": ["Start im", "Lötmodus"],
+      "desc": "Heizverhalten beim Einschalten der Spannungsversorgung (A=aus | L=Lötmodus | R=Ruhemodus | K=Ruhemodus mit kalter Spitze)"
+    },
+    "CooldownBlink": {
+      "text2": ["Abkühl-", "blinken"],
+      "desc": "Temperaturanzeige blinkt beim Abkühlen, solange Spitze heiß ist"
+    },
+    "TemperatureCalibration": {
+      "text2": ["Temperatur", "kalibrieren?"],
+      "desc": "Kalibrierung der Lötspitzentemperatur"
+    },
+    "SettingsReset": {
+      "text2": ["Einstellungen", "zurücksetzen?"],
+      "desc": "Werte auf Werkseinstellungen zurücksetzen"
+    },
+    "VoltageCalibration": {
+      "text2": ["Eingangsspannung", "kalibrieren?"],
+      "desc": "Kalibrierung der Eingangsspannung (Langer Tastendruck zum Verlassen)"
+    },
+    "AdvancedSoldering": {
+      "text2": ["Detaillierte", "Lötansicht"],
+      "desc": "Detaillierte Anzeige im Lötmodus"
+    },
+    "ScrollingSpeed": {
+      "text2": ["Scroll-", "geschw."],
+      "desc": "Scrollgeschwindigkeit der Erläuterungen (L=langsam | S=schnell)"
+    },
+    "QCMaxVoltage": {
+      "text2": ["Spannungs-", "maximum"],
+      "desc": "Maximal zulässige Spannung der verwendeten Spannungsversorgung (V=Volt)"
+    },
+    "PDNegTimeout": {
+      "text2": ["PD", "timeout"],
+      "desc": "PD Abfragedauer in 100ms Schritten (Kompatibilität mit best. QC-Ladegeräten)"
+    },
+    "PowerLimit": {
+      "text2": ["Leistungs-", "maximum"],
+      "desc": "Maximal zulässige Leistungsaufnahme des Lötkolbens (W=Watt)"
+    },
+    "ReverseButtonTempChange": {
+      "text2": ["+- Tasten", "umkehren?"],
+      "desc": "Tastenbelegung zur Temperaturänderung umkehren"
+    },
+    "TempChangeShortStep": {
+      "text2": ["Temp-Schritt", "Druck kurz"],
+      "desc": "Schrittweite für Temperaturwechsel bei kurzem Tastendruck"
+    },
+    "TempChangeLongStep": {
+      "text2": ["Temp-Schritt", "Druck lang"],
+      "desc": "Schrittweite für Temperaturwechsel bei langem Tastendruck"
+    },
+    "PowerPulsePower": {
+      "text2": ["Leistungs-", "impuls"],
+      "desc": "Powerbank mit einem Impuls wach halten (Watt)"
+    },
+    "HallEffSensitivity": {
+      "text2": ["Empfindlichkeit", "der Hall-Sonde"],
+      "desc": "Empfindlichkeit der Hall-Sonde beim Erkennen des Ruhemodus (0=aus | 1=minimal | ... | 9=maximal)"
+    },
+    "LockingMode": {
+      "text2": ["Tasten-", "sperre"],
+      "desc": "Langes drücken beider Tasten im Lötmodus sperrt diese (A=aus | B=nur Boost | V=vollständig)"
+    },
+    "MinVolCell": {
+      "text2": ["Minimale", "Spannung"],
+      "desc": "Minimal zulässige Spannung pro Zelle (3S: 3 - 3,7V | 4-6S: 2,4 - 3,7V)"
+    },
+    "AnimLoop": {
+      "text2": ["Anim.", "Schleife"],
+      "desc": "Icon-Animationen im Hauptmenü wiederholen"
+    },
+    "AnimSpeed": {
+      "text2": ["Anim.", "Geschw."],
+      "desc": "Geschwindigkeit der Icon-Animationen im Menü (A=aus | L=langsam | M=mittel | S=schnell)"
+    },
+    "PowerPulseWait": {
+      "text2": ["Impuls-", "verzögerung"],
+      "desc": "Dauer vor Abgabe von Wachhalteimpulsen (x 2,5s)"
+    },
+    "PowerPulseDuration": {
+      "text2": ["Impuls-", "dauer"],
+      "desc": "Dauer des Wachhalteimpulses (x 250ms)"
+    },
+    "LanguageSwitch": {
+      "text2": ["Sprache:", " DE     Deutsch"],
+      "desc": "Sprache der Firmware ändern"
+    },
+    "Brightness": {
+      "text2": ["Bildschirm-", "kontrast"],
+      "desc": "Verändert die Helligkeit des OLED-Displays"
+    },
+    "ColourInversion": {
+      "text2": ["Farben", "umkehren"],
+      "desc": "Invertiert die Farben des OLED-Displays"
+    },
+    "LOGOTime": {
+      "text2": ["Startlogo-", "dauer"],
+      "desc": "Legt die Dauer der Anzeige des Startlogos fest (s=Sekunden)"
+    }
+  }
+}

Translations/translation_EL.json

@@ -0,0 +1,207 @@
+{
+  "languageCode": "EL",
+  "languageLocalName": "Greek",
+  "fonts": ["ascii_basic", "greek"],
+  "tempUnitFahrenheit": true,
+  "messages": {
+    "SettingsCalibrationWarning": "Πριν προχωρήσετε, παρακαλώ σιγουρευτείτε πως η μύτη βρίσκεται σε θερμοκρασία δωματίου!",
+    "SettingsResetWarning": "Σίγουρα θέλετε επαναφορά αρχικών ρυθμίσεων;",
+    "UVLOWarningString": "Χαμηλ DC",
+    "UndervoltageString": "Υπόταση",
+    "InputVoltageString": "Είσοδος V: ",
+    "SleepingSimpleString": "Zzzz",
+    "SleepingAdvancedString": "Υπνος...",
+    "SleepingTipAdvancedString": "Μύτη:",
+    "OffString": "Απ."
+  },
+  "messagesWarn": {
+    "ResetOKMessage": "Επαν. OK",
+    "SettingsResetMessage": ["Κάποιες ρυθμ.", "άλλαξαν"],
+    "NoAccelerometerMessage": ["Δεν εντοπίστηκε", "επιταχυνσιόμετρο"],
+    "NoPowerDeliveryMessage": ["Δεν εντοπίστηκε", "κύκλωμα USB-PD"],
+    "LockingKeysString": "ΚΛΕΙΔ.",
+    "UnlockingKeysString": "ΞΕΚΛΕΙΔ.",
+    "WarningKeysLockedString": ["ΚΛΕΙΔΩΜΕΝΑ", "ΠΛΗΚΤΡΑ!"],
+    "WarningThermalRunaway": ["Θερμική", "Φυγή"]
+  },
+  "characters": {
+    "SettingRightChar": "R",
+    "SettingLeftChar": "L",
+    "SettingAutoChar": "Α",
+    "SettingOffChar": "0",
+    "SettingSlowChar": "Α",
+    "SettingMediumChar": "Μ",
+    "SettingFastChar": "Γ",
+    "SettingStartNoneChar": "0",
+    "SettingStartSolderingChar": "Κ",
+    "SettingStartSleepChar": "Ζ",
+    "SettingStartSleepOffChar": "Υ",
+    "SettingSensitivityOff": "0",
+    "SettingSensitivityLow": "Χ",
+    "SettingSensitivityMedium": "Μ",
+    "SettingSensitivityHigh": "Υ",
+    "SettingLockDisableChar": "Α",
+    "SettingLockBoostChar": "B",
+    "SettingLockFullChar": "Π"
+  },
+  "menuGroups": {
+    "PowerMenu": {
+      "text2": ["Ρυθμίσεις", "ενέργειας"],
+      "desc": "Ρυθμίσεις ενέργειας"
+    },
+    "SolderingMenu": {
+      "text2": ["Ρυθμίσεις", "κόλλησης"],
+      "desc": "Ρυθμίσεις κόλλησης"
+    },
+    "PowerSavingMenu": {
+      "text2": ["Λειτουργία", "ύπνου"],
+      "desc": "Ρυθμίσεις εξοικ. ενέργ."
+    },
+    "UIMenu": {
+      "text2": ["Διεπαφή", "χρήστη"],
+      "desc": "Ρυθμίσεις διεπαφής χρήστη"
+    },
+    "AdvancedMenu": {
+      "text2": ["Προηγμένες", "ρυθμίσεις"],
+      "desc": "Προηγμένες ρυθμίσεις"
+    }
+  },
+  "menuOptions": {
+    "DCInCutoff": {
+      "text2": ["Πηγή", "ενέργειας"],
+      "desc": "Πηγή ενέργειας. Oρισμός τάσης απενεργοποίησης. (DC 10V) (S 3.3V ανα κυψέλη, απενεργοποίηση ενεργειακού ορίου)"
+    },
+    "SleepTemperature": {
+      "text2": ["Θερμοκρ.", "ύπνου"],
+      "desc": "Θερμοκρασία μύτης σε λειτ. ύπνου"
+    },
+    "SleepTimeout": {
+      "text2": ["Έναρξη", "ύπνου"],
+      "desc": "Χρονικό διάστημα πρίν την ενεργοποίηση λειτουργίας ύπνου (Δ=δευτ. | Λ=λεπτά)"
+    },
+    "ShutdownTimeout": {
+      "text2": ["Έναρξη", "απενεργ."],
+      "desc": "Χρονικό διάστημα πρίν την απενεργοποίηση του κολλητηριού (Λ=λεπτά)"
+    },
+    "MotionSensitivity": {
+      "text2": ["Ευαισθησία", "κίνησης"],
+      "desc": "0=off | 1=λιγότερο ευαίσθητο | ... | 9=περισσότερο ευαίσθητο"
+    },
+    "TemperatureUnit": {
+      "text2": ["Μονάδες", "θερμοκρασίας"],
+      "desc": "C=Κελσίου | F=Φαρενάιτ"
+    },
+    "AdvancedIdle": {
+      "text2": ["Λεπτομερής", "οθ. αδράνειας"],
+      "desc": "Προβολή λεπτομερών πληροφοριών σε μικρότερη γραμματοσειρά στην οθόνη αδράνειας"
+    },
+    "DisplayRotation": {
+      "text2": ["Διάταξη", "οθόνης"],
+      "desc": "R=δεξιόχειρες | L=αριστερόχειρες | Α=αυτόματο"
+    },
+    "BoostTemperature": {
+      "text2": ["Θερμοκ.", "boost"],
+      "desc": "Θερμοκρασία στη \"λειτουργία boost\""
+    },
+    "AutoStart": {
+      "text2": ["Ζέσταμα", "κατά την εν."],
+      "desc": "0=off | Κ=θερμ. κόλλησης | Z=αναμονή σε θερμοκρασία ύπνου μέχρι την κίνηση | Υ=αναμονή χωρίς ζέσταμα μέχρι την κίνηση"
+    },
+    "CooldownBlink": {
+      "text2": ["Αναβοσβήσιμο", "ψύξης"],
+      "desc": "Αναβοσβήσιμο της ενδειξης θερμοκρασίας κατά την παύση θέρμανσης όταν η μύτη είναι ακόμα καυτή"
+    },
+    "TemperatureCalibration": {
+      "text2": ["Βαθμονόμηση", "θερμοκρασίας;"],
+      "desc": "Βαθμονόμηση αρχικής θερμοκρασίας μύτης"
+    },
+    "SettingsReset": {
+      "text2": ["Επαναφορά", "εργ. ρυθμίσεων;"],
+      "desc": "Επαναφορά στις προεπιλεγμένες ρυθμίσεις"
+    },
+    "VoltageCalibration": {
+      "text2": ["Βαθμονόμηση", "τάσης εισόδου;"],
+      "desc": "Έναρξη βαθμονόμησης τάσης εισόδου (κράτημα για έξοδο)"
+    },
+    "AdvancedSoldering": {
+      "text2": ["Λεπτομερής", "οθ. κόλλησης"],
+      "desc": "Προβολή λεπτομερών πληροφοριών σε μικρότερη γραμματοσειρά στην οθόνη κόλλησης"
+    },
+    "ScrollingSpeed": {
+      "text2": ["Ταχύτητα", "κύλισης"],
+      "desc": "Ταχύτητα κύλισης κειμένου (Α=αργά | Γ=γρήγορα)"
+    },
+    "QCMaxVoltage": {
+      "text2": ["Τάση", "QC"],
+      "desc": "Μέγιστη τάση QC που να ζητά το κολλητήρι από το τροφοδοτικό"
+    },
+    "PDNegTimeout": {
+      "text2": ["χρονικό όριο", "PD"],
+      "desc": "Χρονικό όριο διαπραγμάτευσης PD σε βήματα 100ms για συμβατότητα με κάποιους φορτιστές QC"
+    },
+    "PowerLimit": {
+      "text2": ["Ενεργειακό", "όριο"],
+      "desc": "Μέγιστη ενέργεια που μπορεί να χρησιμοποιεί το κολλητήρι (W=watt)"
+    },
+    "ReverseButtonTempChange": {
+      "text2": ["Αντιστροφή", "πλήκτρων + -"],
+      "desc": "Αντιστροφή διάταξης πλήκτρων στη ρύθμιση θερμοκρασίας"
+    },
+    "TempChangeShortStep": {
+      "text2": ["Αλλαγή θερμοκ.", "στιγμιαίο"],
+      "desc": "Βήμα αλλαγής θερμοκρασίας σε στιγμιαίο πάτημα πλήκτρου"
+    },
+    "TempChangeLongStep": {
+      "text2": ["Αλλαγή θερμοκ.", "παρατεταμένο"],
+      "desc": "Βήμα αλλαγής θερμοκρασίας σε παρατεταμένο πάτημα πλήκτρου"
+    },
+    "PowerPulsePower": {
+      "text2": ["Παλμός", "ενέργειας"],
+      "desc": "Ένταση ενέργειας παλμού διατήρησης λειτουργίας (watt)"
+    },
+    "HallEffSensitivity": {
+      "text2": ["Ευαισθ. αισθ. ", "φαιν. Hall"],
+      "desc": "Ευαισθησία του αισθητήρα φαινομένου Hall για εντοπισμό αδράνειας (0=off | 1=λιγότερο ευαίσθητο | ... | 9=περισσότερο ευαίσθητο)"
+    },
+    "LockingMode": {
+      "text2": ["Κλείδωμα", "πλήκτρων"],
+      "desc": "Κατά την κόλληση, κρατήστε και τα δύο πλήκτρα για κλείδωμα (A=απενεργοποίηση | B=μόνο λειτ. boost | Π=πλήρες κλείδωμα)"
+    },
+    "MinVolCell": {
+      "text2": ["Ελάχιστη", "τάση"],
+      "desc": "Ελάχιστη επιτρεπτή τάση ανα κυψέλη (3 σε σειρά: 3 - 3.7V | 4-6 σε σειρά: 2.4 - 3.7V)"
+    },
+    "AnimLoop": {
+      "text2": ["Επανάληψη", "κιν. εικονιδ."],
+      "desc": "Επανάληψη κίνησης εικονιδίων στο αρχικό μενού"
+    },
+    "AnimSpeed": {
+      "text2": ["Ταχύτητα", "κιν. εικονιδ."],
+      "desc": "Ρυθμός κίνησης εικονιδίων στο μενού (0=off | Α=αργός | Μ=μέτριος | Γ=γρήγορος"
+    },
+    "PowerPulseWait": {
+      "text2": ["Καθυστέρηση", "παλμού ενέργ."],
+      "desc": "Καθυστέρηση πριν την ενεργοποίση παλμού διατήρησης λειτουργίας (x 2.5s)"
+    },
+    "PowerPulseDuration": {
+      "text2": ["Διάρκεια", "παλμού ενέργ."],
+      "desc": "Διάρκεια παλμού διατήρησης ενέργειας (x 250ms)"
+    },
+    "LanguageSwitch": {
+      "text2": ["Γλώσσα", " GR Ελληνικά"],
+      "desc": "Τρέχουσα γλώσσα λογισμικού"
+    },
+    "Brightness": {
+      "text2": ["Αντίθεση", "οθόνης"],
+      "desc": "Ρύθμιση φωτεινότητας οθόνης OLED"
+    },
+    "ColourInversion": {
+      "text2": ["Αντιστροφή", "χρωμάτων"],
+      "desc": "Αντιστροφή χρωμάτων οθόνης OLED"
+    },
+    "LOGOTime": {
+      "text2": ["Boot logo", "duration"],
+      "desc": "Sets the duration for the boot logo (s=seconds)"
+    }
+  }
+}

Translations/translation_EN.json

@@ -0,0 +1,207 @@
+{
+  "languageCode": "EN",
+  "languageLocalName": "English",
+  "fonts": ["ascii_basic"],
+  "tempUnitFahrenheit": true,
+  "messages": {
+    "SettingsCalibrationWarning": "Please ensure the tip is at room temperature, before proceeding!",
+    "SettingsResetWarning": "Are you sure you want to restore default settings?",
+    "UVLOWarningString": "DC LOW",
+    "UndervoltageString": "Undervoltage",
+    "InputVoltageString": "Input V: ",
+    "SleepingSimpleString": "Zzzz",
+    "SleepingAdvancedString": "Sleeping...",
+    "SleepingTipAdvancedString": "Tip:",
+    "OffString": "Off"
+  },
+  "messagesWarn": {
+    "ResetOKMessage": "Reset OK",
+    "SettingsResetMessage": ["Certain settings", "were changed!"],
+    "NoAccelerometerMessage": ["No accelerometer", "detected!"],
+    "NoPowerDeliveryMessage": ["No USB-PD IC", "detected!"],
+    "LockingKeysString": "LOCKED",
+    "UnlockingKeysString": "UNLOCKED",
+    "WarningKeysLockedString": "!LOCKED!",
+    "WarningThermalRunaway": ["Thermal", "Runaway"]
+  },
+  "characters": {
+    "SettingRightChar": "R",
+    "SettingLeftChar": "L",
+    "SettingAutoChar": "A",
+    "SettingOffChar": "O",
+    "SettingSlowChar": "S",
+    "SettingMediumChar": "M",
+    "SettingFastChar": "F",
+    "SettingStartNoneChar": "O",
+    "SettingStartSolderingChar": "S",
+    "SettingStartSleepChar": "Z",
+    "SettingStartSleepOffChar": "R",
+    "SettingSensitivityOff": "O",
+    "SettingSensitivityLow": "L",
+    "SettingSensitivityMedium": "M",
+    "SettingSensitivityHigh": "H",
+    "SettingLockDisableChar": "D",
+    "SettingLockBoostChar": "B",
+    "SettingLockFullChar": "F"
+  },
+  "menuGroups": {
+    "PowerMenu": {
+      "text2": ["Power", "settings"],
+      "desc": "Power settings"
+    },
+    "SolderingMenu": {
+      "text2": ["Soldering", "settings"],
+      "desc": "Soldering settings"
+    },
+    "PowerSavingMenu": {
+      "text2": ["Sleep", "mode"],
+      "desc": "Power saving settings"
+    },
+    "UIMenu": {
+      "text2": ["User", "interface"],
+      "desc": "User interface settings"
+    },
+    "AdvancedMenu": {
+      "text2": ["Advanced", "settings"],
+      "desc": "Advanced settings"
+    }
+  },
+  "menuOptions": {
+    "DCInCutoff": {
+      "text2": ["Power", "source"],
+      "desc": "Power source. Sets cutoff voltage. (DC 10V) (S 3.3V per cell, disable power limit)"
+    },
+    "SleepTemperature": {
+      "text2": ["Sleep", "temp"],
+      "desc": "Tip temperature while in \"sleep mode\""
+    },
+    "SleepTimeout": {
+      "text2": ["Sleep", "timeout"],
+      "desc": "Interval before \"sleep mode\" kicks in (s=seconds | m=minutes)"
+    },
+    "ShutdownTimeout": {
+      "text2": ["Shutdown", "timeout"],
+      "desc": "Interval before the iron shuts down (m=minutes)"
+    },
+    "MotionSensitivity": {
+      "text2": ["Motion", "sensitivity"],
+      "desc": "0=off | 1=least sensitive | ... | 9=most sensitive"
+    },
+    "TemperatureUnit": {
+      "text2": ["Temperature", "unit"],
+      "desc": "C=Celsius | F=Fahrenheit"
+    },
+    "AdvancedIdle": {
+      "text2": ["Detailed", "idle screen"],
+      "desc": "Display detailed information in a smaller font on the idle screen"
+    },
+    "DisplayRotation": {
+      "text2": ["Display", "orientation"],
+      "desc": "R=right-handed | L=left-handed | A=automatic"
+    },
+    "BoostTemperature": {
+      "text2": ["Boost", "temp"],
+      "desc": "Tip temperature used in \"boost mode\""
+    },
+    "AutoStart": {
+      "text2": ["Start-up", "behavior"],
+      "desc": "O=off | S=heat up to soldering temp | Z=standby at sleep temp until moved | R=standby without heating until moved"
+    },
+    "CooldownBlink": {
+      "text2": ["Cooldown", "flashing"],
+      "desc": "Flash the temperature reading after heating was halted while the tip is still hot"
+    },
+    "TemperatureCalibration": {
+      "text2": ["Calibrate", "temperature?"],
+      "desc": "Start tip temperature offset calibration"
+    },
+    "SettingsReset": {
+      "text2": ["Restore factory", "settings?"],
+      "desc": "Reset all settings to default"
+    },
+    "VoltageCalibration": {
+      "text2": ["Calibrate", "input voltage?"],
+      "desc": "Start VIN calibration (long press to exit)"
+    },
+    "AdvancedSoldering": {
+      "text2": ["Detailed", "solder screen"],
+      "desc": "Display detailed information in a smaller font on soldering screen"
+    },
+    "ScrollingSpeed": {
+      "text2": ["Scrolling", "speed"],
+      "desc": "Speed info text scrolls past at (S=slow | F=fast)"
+    },
+    "QCMaxVoltage": {
+      "text2": ["QC", "voltage"],
+      "desc": "Max QC voltage the iron should negotiate for"
+    },
+    "PDNegTimeout": {
+      "text2": ["PD", "timeout"],
+      "desc": "PD negotiation timeout in 100ms steps for compatibility with some QC chargers"
+    },
+    "PowerLimit": {
+      "text2": ["Power", "limit"],
+      "desc": "Maximum power the iron can use (W=watt)"
+    },
+    "ReverseButtonTempChange": {
+      "text2": ["Swap", "+ - keys"],
+      "desc": "Reverse assignment of buttons for temperature adjustment"
+    },
+    "TempChangeShortStep": {
+      "text2": ["Temp change", "short"],
+      "desc": "Temperature-change-increment on short button press"
+    },
+    "TempChangeLongStep": {
+      "text2": ["Temp change", "long"],
+      "desc": "Temperature-change-increment on long button press"
+    },
+    "PowerPulsePower": {
+      "text2": ["Power", "pulse"],
+      "desc": "Intensity of power of keep-awake-pulse (watt)"
+    },
+    "HallEffSensitivity": {
+      "text2": ["Hall sensor", "sensitivity"],
+      "desc": "Sensitivity of the Hall effect sensor to detect sleep (0=off | 1=least sensitive | ... | 9=most sensitive)"
+    },
+    "LockingMode": {
+      "text2": ["Allow locking", "buttons"],
+      "desc": "While soldering, hold down both buttons to toggle locking them (D=disable | B=boost mode only | F=full locking)"
+    },
+    "MinVolCell": {
+      "text2": ["Minimum", "voltage"],
+      "desc": "Minimum allowed voltage per cell (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)"
+    },
+    "AnimLoop": {
+      "text2": ["Anim.", "loop"],
+      "desc": "Loop icon animations in main menu"
+    },
+    "AnimSpeed": {
+      "text2": ["Anim.", "speed"],
+      "desc": "Pace of icon animations in menu (O=off | S=slow | M=medium | F=fast)"
+    },
+    "PowerPulseWait": {
+      "text2": ["Power pulse", "delay"],
+      "desc": "Delay before keep-awake-pulse is triggered (x 2.5s)"
+    },
+    "PowerPulseDuration": {
+      "text2": ["Power pulse", "duration"],
+      "desc": "Keep-awake-pulse duration (x 250ms)"
+    },
+    "LanguageSwitch": {
+      "text2": ["Language:", " EN     English"],
+      "desc": "Current firmware language"
+    },
+    "Brightness": {
+      "text2": ["Screen", "brightness"],
+      "desc": "Adjust the brightness of the OLED screen"
+    },
+    "ColourInversion": {
+      "text2": ["Invert", "screen"],
+      "desc": "Invert the colours of the OLED screen"
+    },
+    "LOGOTime": {
+      "text2": ["Boot logo", "duration"],
+      "desc": "Sets the duration for the boot logo (s=seconds)"
+    }
+  }
+}

Translations/translation_ES.json

@@ -0,0 +1,207 @@
+{
+  "languageCode": "ES",
+  "languageLocalName": "Castellano",
+  "fonts": ["ascii_basic", "latin_extended"],
+  "tempUnitFahrenheit": false,
+  "messages": {
+    "SettingsCalibrationWarning": "¡Asegúrate que la punta esté a temperatura ambiente antes de empezar!",
+    "SettingsResetWarning": "¿Quieres restablecer los ajustes?",
+    "UVLOWarningString": "CC BAJA",
+    "UndervoltageString": "Voltaje bajo",
+    "InputVoltageString": "Voltaje: ",
+    "SleepingSimpleString": "Zzzz",
+    "SleepingAdvancedString": "En reposo...",
+    "SleepingTipAdvancedString": "Punta:",
+    "OffString": " No"
+  },
+  "messagesWarn": {
+    "ResetOKMessage": "Hecho.",
+    "SettingsResetMessage": ["Los ajustes fueron", "¡Reinicio!"],
+    "NoAccelerometerMessage": ["Sin acelerómetro", "¡Detectado!"],
+    "NoPowerDeliveryMessage": ["Sin USB-PD IC", "¡Detectado!"],
+    "LockingKeysString": " BLOQUEADO",
+    "UnlockingKeysString": "DESBLOQUEADO",
+    "WarningKeysLockedString": "¡BLOQUEADO!",
+    "WarningThermalRunaway": ["Thermal", "Runaway"]
+  },
+  "characters": {
+    "SettingRightChar": "D",
+    "SettingLeftChar": "I",
+    "SettingAutoChar": "A",
+    "SettingOffChar": "O",
+    "SettingSlowChar": "L",
+    "SettingMediumChar": "M",
+    "SettingFastChar": "R",
+    "SettingStartNoneChar": "N",
+    "SettingStartSolderingChar": "S",
+    "SettingStartSleepChar": "R",
+    "SettingStartSleepOffChar": "F",
+    "SettingSensitivityOff": "O",
+    "SettingSensitivityLow": "L",
+    "SettingSensitivityMedium": "M",
+    "SettingSensitivityHigh": "H",
+    "SettingLockDisableChar": "D",
+    "SettingLockBoostChar": "B",
+    "SettingLockFullChar": "F"
+  },
+  "menuGroups": {
+    "PowerMenu": {
+      "text2": ["Potencia", "ajustes"],
+      "desc": "Ajustes de potencia"
+    },
+    "SolderingMenu": {
+      "text2": ["Ajustes de", "soldadura"],
+      "desc": "Ajustes para soldar."
+    },
+    "PowerSavingMenu": {
+      "text2": ["Modos de", "reposo"],
+      "desc": "Ajustes de ahorro energético."
+    },
+    "UIMenu": {
+      "text2": ["Interfaz", "de usuario"],
+      "desc": "Ajustes de interfaz de usuario."
+    },
+    "AdvancedMenu": {
+      "text2": ["Ajustes", "avanzados"],
+      "desc": "Ajustes avanzados."
+    }
+  },
+  "menuOptions": {
+    "DCInCutoff": {
+      "text2": ["Fuente", "de energía"],
+      "desc": "Elige el tipo de fuente para limitar el voltaje (DC 10V) (S 3,3V por pila, ilimitado)"
+    },
+    "SleepTemperature": {
+      "text2": ["Temperatura", "en reposo"],
+      "desc": "Temperatura de la punta en reposo."
+    },
+    "SleepTimeout": {
+      "text2": ["Entrar", "en reposo"],
+      "desc": "Tiempo de inactividad para entrar en reposo (min | seg)"
+    },
+    "ShutdownTimeout": {
+      "text2": ["Tiempo de", "apagado"],
+      "desc": "Tiempo de inactividad para apagarse (en minutos)"
+    },
+    "MotionSensitivity": {
+      "text2": ["Detección de", "movimiento"],
+      "desc": "Tiempo de reacción al agarrar (0=no | 1=menos sensible | ... | 9=más sensible)"
+    },
+    "TemperatureUnit": {
+      "text2": ["Unidad de", "temperatura"],
+      "desc": "Unidad de temperatura (C=centígrados | F=Fahrenheit)"
+    },
+    "AdvancedIdle": {
+      "text2": ["Info extra en", "modo reposo"],
+      "desc": "Muestra información detallada en letra pequeña al reposar."
+    },
+    "DisplayRotation": {
+      "text2": ["Orientación", "de pantalla"],
+      "desc": "Orientación de la pantalla (D=diestro | I=zurdo | A=automático)"
+    },
+    "BoostTemperature": {
+      "text2": ["Ajustar la", "temp. extra"],
+      "desc": "Temperatura momentánea que se alcanza al apretar el botón del modo extra."
+    },
+    "AutoStart": {
+      "text2": ["Calentar", "al enchufar"],
+      "desc": "Se calienta él solo al arrancar (N=no | S=entrar en modo soldar | R=solo entrar en reposo | F=en reposo pero mantiene la punta fría)"
+    },
+    "CooldownBlink": {
+      "text2": ["Parpadear", "al enfriar"],
+      "desc": "La temperatura en pantalla parpadea mientras la punta siga caliente."
+    },
+    "TemperatureCalibration": {
+      "text2": ["Calibrar temp.", "de la punta"],
+      "desc": "Calibra la desviación térmica de la punta."
+    },
+    "SettingsReset": {
+      "text2": ["Volver a ajustes", "de fábrica"],
+      "desc": "Restablece todos los ajustes a los valores originales."
+    },
+    "VoltageCalibration": {
+      "text2": ["Calibrar voltaje", "de entrada"],
+      "desc": "Calibra VIN. Ajusta con ambos botones y mantén pulsado para salir."
+    },
+    "AdvancedSoldering": {
+      "text2": ["Info extra", "al soldar"],
+      "desc": "Muestra más datos por pantalla cuando se está soldando."
+    },
+    "ScrollingSpeed": {
+      "text2": ["Velocidad", "del texto"],
+      "desc": "Velocidad de desplazamiento del texto (R=rápida | L=lenta)"
+    },
+    "QCMaxVoltage": {
+      "text2": ["Potencia de", "entrada"],
+      "desc": "Potencia en vatios del adaptador de corriente utilizado."
+    },
+    "PDNegTimeout": {
+      "text2": ["PD", "timeout"],
+      "desc": "PD negotiation timeout in 100ms steps for compatibility with some QC chargers (0: disabled)"
+    },
+    "PowerLimit": {
+      "text2": ["Ajustar la", "potenc. máx."],
+      "desc": "Elige el límite de potencia máxima del soldador (en vatios)"
+    },
+    "ReverseButtonTempChange": {
+      "text2": ["Invertir", "botones +/-"],
+      "desc": "Intercambia las funciones de subir y bajar la temperatura de los botones +/- para que funcionen al revés."
+    },
+    "TempChangeShortStep": {
+      "text2": ["Cambio temp.", "puls. cortas"],
+      "desc": "Subir y bajar X grados de temperatura con cada pulsación corta de los botones +/-."
+    },
+    "TempChangeLongStep": {
+      "text2": ["Cambio temp.", "puls. largas"],
+      "desc": "Subir y bajar X grados de temperatura con cada pulsación larga de los botones +/-."
+    },
+    "PowerPulsePower": {
+      "text2": ["Pulsos bat.", "constantes"],
+      "desc": "Aplica unos pulsos necesarios para mantener encendidas ciertas baterías portátiles. En vatios."
+    },
+    "HallEffSensitivity": {
+      "text2": ["Hall Eff", "Sensibilidad"],
+      "desc": "Sensibilidad del sensor de efecto Hall en la detección de reposo (0=no | 1=menos sensible | ... | 9=más sensible)"
+    },
+    "LockingMode": {
+      "text2": ["Permitir botones", "bloqueo"],
+      "desc": "Al soldar, una pulsación larga en ambos botones los bloquea (D=desactivar | B=sólo potenciar | F=bloqueo total)."
+    },
+    "MinVolCell": {
+      "text2": ["Mínimo", "voltaje"],
+      "desc": "voltaje mínimo permitido por célula (3S: 3 - 3,7V | 4-6S: 2,4 - 3,7V)"
+    },
+    "AnimLoop": {
+      "text2": ["Anim.", "bucle"],
+      "desc": "Animaciones de iconos en bucle en el menú raíz"
+    },
+    "AnimSpeed": {
+      "text2": ["Anim.", "velocidad"],
+      "desc": "Velocidad de las animaciones de los iconos en el menú (O=off | L=low | M=medium | R=high)"
+    },
+    "PowerPulseWait": {
+      "text2": ["Impulso de potencia", "tiempo de espera"],
+      "desc": "Tiempo de espera antes de disparar cada pulso de mantenimiento de la vigilia (x 2,5s)"
+    },
+    "PowerPulseDuration": {
+      "text2": ["Impulso de potencia", "duración"],
+      "desc": "Duración del impulso de mantenimiento de la vigilia (x 250ms)"
+    },
+    "LanguageSwitch": {
+      "text2": ["Language:", " ES  Castellano"],
+      "desc": ""
+    },
+    "Brightness": {
+      "text2": ["Screen", "brightness"],
+      "desc": "Adjust the brightness of the OLED screen"
+    },
+    "ColourInversion": {
+      "text2": ["Invert", "screen"],
+      "desc": "Invert the colours of the OLED screen"
+    },
+    "LOGOTime": {
+      "text2": ["Boot logo", "duration"],
+      "desc": "Sets the duration for the boot logo (s=seconds)"
+    }
+  }
+}

Translations/translation_FI.json

@@ -0,0 +1,207 @@
+{
+  "languageCode": "FI",
+  "languageLocalName": "Suomi",
+  "fonts": ["ascii_basic", "latin_extended"],
+  "tempUnitFahrenheit": false,
+  "messages": {
+    "SettingsCalibrationWarning": "Varmista että kärki on huoneenlämpöinen ennen jatkamista!",
+    "SettingsResetWarning": "Haluatko varmasti palauttaa oletusarvot?",
+    "UVLOWarningString": "DC ALH.",
+    "UndervoltageString": "Alijännite",
+    "InputVoltageString": "Jännite: ",
+    "SleepingSimpleString": "Zzzz",
+    "SleepingAdvancedString": "Lepotila...",
+    "SleepingTipAdvancedString": "Kärki:",
+    "OffString": "Off"
+  },
+  "messagesWarn": {
+    "ResetOKMessage": "Palautus",
+    "SettingsResetMessage": ["Asetukset", "palautettu!"],
+    "NoAccelerometerMessage": ["Kiihtyvyysanturi", "puuttuu!"],
+    "NoPowerDeliveryMessage": ["USB-PD IC", "puuttuu!"],
+    "LockingKeysString": " LUKITTU",
+    "UnlockingKeysString": "AUKI",
+    "WarningKeysLockedString": "!LUKKO!",
+    "WarningThermalRunaway": ["Thermal", "Runaway"]
+  },
+  "characters": {
+    "SettingRightChar": "O",
+    "SettingLeftChar": "V",
+    "SettingAutoChar": "A",
+    "SettingOffChar": "P",
+    "SettingSlowChar": "A",
+    "SettingMediumChar": "M",
+    "SettingFastChar": "S",
+    "SettingStartNoneChar": "E",
+    "SettingStartSolderingChar": "J",
+    "SettingStartSleepChar": "L",
+    "SettingStartSleepOffChar": "H",
+    "SettingSensitivityOff": "P",
+    "SettingSensitivityLow": "A",
+    "SettingSensitivityMedium": "K",
+    "SettingSensitivityHigh": "S",
+    "SettingLockDisableChar": "P",
+    "SettingLockBoostChar": "V",
+    "SettingLockFullChar": "K"
+  },
+  "menuGroups": {
+    "PowerMenu": {
+      "text2": ["Virta-", "asetukset"],
+      "desc": "Virta-asetukset"
+    },
+    "SolderingMenu": {
+      "text2": ["Juotos-", "asetukset"],
+      "desc": "Juotosasetukset"
+    },
+    "PowerSavingMenu": {
+      "text2": ["Lepotilan", "asetukset"],
+      "desc": "Virransäästöasetukset"
+    },
+    "UIMenu": {
+      "text2": ["Käyttö-", "liittymä"],
+      "desc": "Käyttöliittymän asetukset"
+    },
+    "AdvancedMenu": {
+      "text2": ["Lisä-", "asetukset"],
+      "desc": "Lisäasetukset"
+    }
+  },
+  "menuOptions": {
+    "DCInCutoff": {
+      "text2": ["Virtalähde", "DC"],
+      "desc": "Virtalähde. Asettaa katkaisujännitteen. (DC 10V) (S 3.3V per kenno, poistaa virtarajoitukset)"
+    },
+    "SleepTemperature": {
+      "text2": ["Lepotilan", "lämpötila"],
+      "desc": "Kärjen lämpötila \"lepotilassa\""
+    },
+    "SleepTimeout": {
+      "text2": ["Lepotilan", "viive"],
+      "desc": "\"Lepotilan\" ajastus (s=sekuntia | m=minuuttia)"
+    },
+    "ShutdownTimeout": {
+      "text2": ["Sammutus", "viive"],
+      "desc": "Automaattisen sammutuksen ajastus (m=minuuttia)"
+    },
+    "MotionSensitivity": {
+      "text2": ["Liikkeen", "herkkyys"],
+      "desc": "0=pois päältä | 1=vähäinen herkkyys | ... | 9=suurin herkkyys"
+    },
+    "TemperatureUnit": {
+      "text2": ["Lämpötilan", "yksikkö"],
+      "desc": "C=celsius, F=fahrenheit"
+    },
+    "AdvancedIdle": {
+      "text2": ["Tiedot", "lepotilassa"],
+      "desc": "Näyttää yksityiskohtaisemmat pienemmällä fontilla tiedot lepotilassa."
+    },
+    "DisplayRotation": {
+      "text2": ["Näytön", "kierto"],
+      "desc": "O=oikeakätinen | V=vasenkätinen | A=automaattinen"
+    },
+    "BoostTemperature": {
+      "text2": ["Tehostus-", "lämpötila"],
+      "desc": "Tehostustilan lämpötila"
+    },
+    "AutoStart": {
+      "text2": ["Autom.", "käynnistys"],
+      "desc": "Käynnistää virrat kytkettäessä juotostilan automaattisesti. (E=Ei käytössä | J=juotostila | L=Lepotila | H=Lepotila huoneenlämpö)"
+    },
+    "CooldownBlink": {
+      "text2": ["Jäähdytyksen", "vilkutus"],
+      "desc": "Vilkuttaa jäähtyessä juotoskärjen lämpötilaa sen ollessa vielä vaarallisen kuuma"
+    },
+    "TemperatureCalibration": {
+      "text2": ["Kalibroi", "lämpötila?"],
+      "desc": "Kalibroi kärjen lämpötilaeron"
+    },
+    "SettingsReset": {
+      "text2": ["Palauta", "tehdasasetukset?"],
+      "desc": "Palauta kaikki asetukset oletusarvoihin"
+    },
+    "VoltageCalibration": {
+      "text2": ["Kalibroi", "tulojännite?"],
+      "desc": "Tulojännitten kalibrointi (VIN) (paina pitkään poistuaksesi)"
+    },
+    "AdvancedSoldering": {
+      "text2": ["Tarkempi", "juotosnäyttö"],
+      "desc": "Näyttää yksityiskohtaisemmat tiedot pienellä fontilla juotostilassa"
+    },
+    "ScrollingSpeed": {
+      "text2": ["Selityksien", "nopeus"],
+      "desc": "Selityksien vieritysnopeus (H=hidas | N=nopea)"
+    },
+    "QCMaxVoltage": {
+      "text2": ["QC", "jännite"],
+      "desc": "Ensisijainen maksimi QC jännite"
+    },
+    "PDNegTimeout": {
+      "text2": ["PD", "timeout"],
+      "desc": "PD negotiation timeout in 100ms steps for compatibility with some QC chargers (0: disabled)"
+    },
+    "PowerLimit": {
+      "text2": ["Tehon-", "rajoitus"],
+      "desc": "Suurin sallittu teho (Watti)"
+    },
+    "ReverseButtonTempChange": {
+      "text2": ["Suunnanvaihto", "+ - näppäimille"],
+      "desc": "Lämpötilapainikkeiden suunnan vaihtaminen"
+    },
+    "TempChangeShortStep": {
+      "text2": ["Lämmön muutos", "lyhyt painal."],
+      "desc": "Lämpötilan muutos lyhyellä painalluksella"
+    },
+    "TempChangeLongStep": {
+      "text2": ["Lämmön muutos", "pitkä painal."],
+      "desc": "Lämpötilan muutos pitkällä painalluksella"
+    },
+    "PowerPulsePower": {
+      "text2": ["Herätyspulssin", "voimakkuus"],
+      "desc": "Herätyspulssin voimakkuus (watti)"
+    },
+    "HallEffSensitivity": {
+      "text2": ["Hall-", "herk."],
+      "desc": "Hall-efektianturin herkkyys lepotilan tunnistuksessa (0=pois päältä | 1=vähäinen herkkyys | ... | 9=suurin herkkyys)"
+    },
+    "LockingMode": {
+      "text2": ["Salli nappien", "lukitus"],
+      "desc": "Kolvatessa paina molempia näppäimiä lukitaksesi ne (P=pois | V=vain tehostus | K=kaikki)"
+    },
+    "MinVolCell": {
+      "text2": ["Pienin", "jännite"],
+      "desc": "Pienin sallittu jännite per kenno (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)"
+    },
+    "AnimLoop": {
+      "text2": ["Animaation", "toistaminen"],
+      "desc": "Toista animaatiot valikossa"
+    },
+    "AnimSpeed": {
+      "text2": ["Animaation", "nopeus"],
+      "desc": "Animaatioiden nopeus valikossa (P=pois | A=alhainen | K=keskiverto | S=suuri)"
+    },
+    "PowerPulseWait": {
+      "text2": ["Pulssin", "odotusaika"],
+      "desc": "Odotusaika herätyspulssin lähetykseen (x 2.5s)"
+    },
+    "PowerPulseDuration": {
+      "text2": ["Pulssin", "kesto"],
+      "desc": "Herätyspulssin kesto (x 250ms)"
+    },
+    "LanguageSwitch": {
+      "text2": ["Kieli:", " FI       Suomi"],
+      "desc": ""
+    },
+    "Brightness": {
+      "text2": ["Screen", "brightness"],
+      "desc": "Adjust the brightness of the OLED screen"
+    },
+    "ColourInversion": {
+      "text2": ["Invert", "screen"],
+      "desc": "Invert the colours of the OLED screen"
+    },
+    "LOGOTime": {
+      "text2": ["Boot logo", "duration"],
+      "desc": "Sets the duration for the boot logo (s=seconds)"
+    }
+  }
+}

Translations/translation_FR.json

@@ -0,0 +1,207 @@
+{
+  "languageCode": "FR",
+  "languageLocalName": "Français",
+  "fonts": ["ascii_basic", "latin_extended"],
+  "tempUnitFahrenheit": false,
+  "messages": {
+    "SettingsCalibrationWarning": "Assurez-vous que la panne soit à température ambiante avant de continuer !",
+    "SettingsResetWarning": "Voulez-vous vraiment réinitialiser les paramètres aux valeurs par défaut ?",
+    "UVLOWarningString": "DC FAIBL",
+    "UndervoltageString": "Sous-tension",
+    "InputVoltageString": "V d'entrée: ",
+    "SleepingSimpleString": "Zzzz",
+    "SleepingAdvancedString": "En veille...",
+    "SleepingTipAdvancedString": "Panne:",
+    "OffString": "Off"
+  },
+  "messagesWarn": {
+    "ResetOKMessage": "Reset OK",
+    "SettingsResetMessage": ["Réglages", "réinitialisés !"],
+    "NoAccelerometerMessage": ["Accéléromètre", "non détecté !"],
+    "NoPowerDeliveryMessage": ["USB-PD", "non détecté !"],
+    "LockingKeysString": "VERROUIL",
+    "UnlockingKeysString": "DEVERROU",
+    "WarningKeysLockedString": "! VERR. !",
+    "WarningThermalRunaway": ["Emballement", "thermique"]
+  },
+  "characters": {
+    "SettingRightChar": "D",
+    "SettingLeftChar": "G",
+    "SettingAutoChar": "A",
+    "SettingOffChar": "D",
+    "SettingSlowChar": "L",
+    "SettingMediumChar": "M",
+    "SettingFastChar": "R",
+    "SettingStartNoneChar": "D",
+    "SettingStartSolderingChar": "A",
+    "SettingStartSleepChar": "V",
+    "SettingStartSleepOffChar": "O",
+    "SettingSensitivityOff": "D",
+    "SettingSensitivityLow": "B",
+    "SettingSensitivityMedium": "M",
+    "SettingSensitivityHigh": "H",
+    "SettingLockDisableChar": "D",
+    "SettingLockBoostChar": "B",
+    "SettingLockFullChar": "V"
+  },
+  "menuGroups": {
+    "PowerMenu": {
+      "text2": ["Paramètres", "d'alim."],
+      "desc": "Paramètres d'alimentation"
+    },
+    "SolderingMenu": {
+      "text2": ["Paramètres", "de soudure"],
+      "desc": "Paramètres de soudure"
+    },
+    "PowerSavingMenu": {
+      "text2": ["Mode", "veille"],
+      "desc": "Paramètres d'économie d'énergie"
+    },
+    "UIMenu": {
+      "text2": ["Interface", "utilisateur"],
+      "desc": "Paramètres de l'interface utilisateur"
+    },
+    "AdvancedMenu": {
+      "text2": ["Options", "avancées"],
+      "desc": "Options avancées"
+    }
+  },
+  "menuOptions": {
+    "DCInCutoff": {
+      "text2": ["Source", "d'alim."],
+      "desc": "Source d'alimentation. Règle la tension de coupure (DC 10V) (S 3.3V par cellules, désactive la limite de puissance)"
+    },
+    "SleepTemperature": {
+      "text2": ["Temp.", "veille"],
+      "desc": "Température de la panne en \"mode veille\""
+    },
+    "SleepTimeout": {
+      "text2": ["Délai", "veille"],
+      "desc": "Délai avant mise en veille (s=secondes | m=minutes)"
+    },
+    "ShutdownTimeout": {
+      "text2": ["Délai", "extinction"],
+      "desc": "Délai avant extinction (m=minutes)"
+    },
+    "MotionSensitivity": {
+      "text2": ["Sensibilité", "au mouvement"],
+      "desc": "0=désactivé | 1=peu sensible | ... | 9=très sensible"
+    },
+    "TemperatureUnit": {
+      "text2": ["Unité de", "température"],
+      "desc": "C=Celsius | F=Fahrenheit"
+    },
+    "AdvancedIdle": {
+      "text2": ["Écran veille", "détaillé"],
+      "desc": "Afficher les informations détaillées sur l'écran de veille"
+    },
+    "DisplayRotation": {
+      "text2": ["Orientation", "de l'écran"],
+      "desc": "D=droitier | G=gaucher | A=automatique"
+    },
+    "BoostTemperature": {
+      "text2": ["Temp.", "boost"],
+      "desc": "Température utilisée en \"mode boost\""
+    },
+    "AutoStart": {
+      "text2": ["Chauffer au", "démarrage"],
+      "desc": "D=désactivé | A=activé | V=mode veille | O=mode veille à température ambiante"
+    },
+    "CooldownBlink": {
+      "text2": ["Refroidir en", "clignotant"],
+      "desc": "Faire clignoter la température lors du refroidissement tant que la panne est chaude"
+    },
+    "TemperatureCalibration": {
+      "text2": ["Étalonner", "température"],
+      "desc": "Étalonner température de la panne"
+    },
+    "SettingsReset": {
+      "text2": ["Réinitialisation", "d'usine"],
+      "desc": "Réinitialiser tous les réglages"
+    },
+    "VoltageCalibration": {
+      "text2": ["Étalonner", "tension d'entrée"],
+      "desc": "Étalonner tension d'entrée (appui long pour quitter)"
+    },
+    "AdvancedSoldering": {
+      "text2": ["Écran soudure", "détaillé"],
+      "desc": "Afficher les informations détaillées sur l'écran de soudure"
+    },
+    "ScrollingSpeed": {
+      "text2": ["Vitesse de", "défilement"],
+      "desc": "Vitesse de défilement du texte (R=rapide | L=lent)"
+    },
+    "QCMaxVoltage": {
+      "text2": ["Tension", "QC"],
+      "desc": "Tension maximale désirée avec une alimentation QC"
+    },
+    "PDNegTimeout": {
+      "text2": ["Délai", "expiration PD"],
+      "desc": "Délai de la negociation PD par étapes de 100ms pour la compatiblité avec certains chargeurs QC"
+    },
+    "PowerLimit": {
+      "text2": ["Limite de", "puissance"],
+      "desc": "Puissance maximale utilisable (W=watts)"
+    },
+    "ReverseButtonTempChange": {
+      "text2": ["Inverser les", "touches + -"],
+      "desc": "Inverser les boutons d'ajustement de température"
+    },
+    "TempChangeShortStep": {
+      "text2": ["Incrément", "appui court"],
+      "desc": "Incrément de changement de température sur appui court"
+    },
+    "TempChangeLongStep": {
+      "text2": ["Incrément", "appui long"],
+      "desc": "Incrément de changement de température sur appui long"
+    },
+    "PowerPulsePower": {
+      "text2": ["Puissance des", "impulsions"],
+      "desc": "Puissance des impulsions pour éviter la mise en veille des batteries (watts)"
+    },
+    "LockingMode": {
+      "text2": ["Verrouiller", "les boutons"],
+      "desc": "Pendant la soudure, appuyer sur les deux boutons pour les verrouiller (D=désactivé | B=boost seulement | V=verr. total)"
+    },
+    "HallEffSensitivity": {
+      "text2": ["Sensibilité", "capteur effet hall"],
+      "desc": "Sensibilité du capteur à effet Hall pour la mise en veille (0=désactivé | 1=peu sensible | ... | 9=très sensible)"
+    },
+    "MinVolCell": {
+      "text2": ["Tension", "minimale"],
+      "desc": "Tension minimale autorisée par cellule (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)"
+    },
+    "AnimLoop": {
+      "text2": ["Rejouer", "anim. icônes"],
+      "desc": "Rejouer en boucle les animations des icônes dans le menu principal"
+    },
+    "AnimSpeed": {
+      "text2": ["Vitesse", "anim. icônes"],
+      "desc": "Vitesse des animations des icônes dans le menu (D=désactivé | L=lente | M=moyenne | R=rapide)"
+    },
+    "PowerPulseWait": {
+      "text2": ["Délai entre", "les impulsions"],
+      "desc": "Délai entre chaque impulsion pour empêcher la mise en veille (x 2.5s)"
+    },
+    "PowerPulseDuration": {
+      "text2": ["Durée des", "impulsions"],
+      "desc": "Durée des impulsions pour empêcher la mise en veille (x 250ms)"
+    },
+    "LanguageSwitch": {
+      "text2": ["Langue :", " FR    Français"],
+      "desc": "Langue du firmware"
+    },
+    "Brightness": {
+      "text2": ["Luminosité", "de l'écran"],
+      "desc": "Ajuster le contraste/luminosité de l'écran OLED"
+    },
+    "ColourInversion": {
+      "text2": ["Inverser", "les couleurs"],
+      "desc": "Inverser les couleurs de l'écran OLED"
+    },
+    "LOGOTime": {
+      "text2": ["Boot logo", "duration"],
+      "desc": "Sets the duration for the boot logo (s=seconds)"
+    }
+  }
+}

Translations/translation_HR.json

@@ -0,0 +1,207 @@
+{
+  "languageCode": "HR",
+  "languageLocalName": "Hrvatski",
+  "fonts": ["ascii_basic", "latin_extended"],
+  "tempUnitFahrenheit": false,
+  "messages": {
+    "SettingsCalibrationWarning": "Provjerite da je vršak ohlađen na sobnu temperaturu prije nego što nastavite!",
+    "SettingsResetWarning": "Jeste li sigurni da želite sve postavke vratiti na tvorničke vrijednosti?",
+    "UVLOWarningString": "BATERIJA",
+    "UndervoltageString": "PRENIZAK NAPON",
+    "InputVoltageString": "Napajanje: ",
+    "SleepingSimpleString": "Zzz ",
+    "SleepingAdvancedString": "SPAVANJE...",
+    "SleepingTipAdvancedString": "Vrh: ",
+    "OffString": "Off"
+  },
+  "messagesWarn": {
+    "ResetOKMessage": "Reset OK",
+    "SettingsResetMessage": ["Certain settings", "were changed!"],
+    "NoAccelerometerMessage": ["No accelerometer", "detected!"],
+    "NoPowerDeliveryMessage": ["No USB-PD IC", "detected!"],
+    "LockingKeysString": "LOCKED",
+    "UnlockingKeysString": "UNLOCKED",
+    "WarningKeysLockedString": "!LOCKED!",
+    "WarningThermalRunaway": ["Thermal", "Runaway"]
+  },
+  "characters": {
+    "SettingRightChar": "D",
+    "SettingLeftChar": "L",
+    "SettingAutoChar": "A",
+    "SettingOffChar": "O",
+    "SettingSlowChar": "S",
+    "SettingMediumChar": "M",
+    "SettingFastChar": "B",
+    "SettingStartNoneChar": "I",
+    "SettingStartSolderingChar": "L",
+    "SettingStartSleepChar": "R",
+    "SettingStartSleepOffChar": "S",
+    "SettingSensitivityOff": "O",
+    "SettingSensitivityLow": "L",
+    "SettingSensitivityMedium": "M",
+    "SettingSensitivityHigh": "H",
+    "SettingLockDisableChar": "D",
+    "SettingLockBoostChar": "B",
+    "SettingLockFullChar": "F"
+  },
+  "menuGroups": {
+    "PowerMenu": {
+      "text2": ["Power", "settings"],
+      "desc": "Power settings"
+    },
+    "SolderingMenu": {
+      "text2": ["Postavke", "lemljenja"],
+      "desc": "Postavke pri lemljenju"
+    },
+    "PowerSavingMenu": {
+      "text2": ["Ušteda", "energije"],
+      "desc": "Postavke spavanja i štednje energije"
+    },
+    "UIMenu": {
+      "text2": ["Korisničko", "sučelje"],
+      "desc": "Postavke korisničkog sučelja"
+    },
+    "AdvancedMenu": {
+      "text2": ["Napredne", "opcije"],
+      "desc": "Upravljanje naprednim opcijama"
+    }
+  },
+  "menuOptions": {
+    "DCInCutoff": {
+      "text2": ["Izvor", "napajanja"],
+      "desc": "Izvor napajanja. Postavlja napon isključivanja. (DC 10V) (S 3.3V po ćeliji)"
+    },
+    "SleepTemperature": {
+      "text2": ["Temp", "spavanja"],
+      "desc": "Temperatura na koju se spušta lemilica nakon određenog vremena mirovanja. (C | F)"
+    },
+    "SleepTimeout": {
+      "text2": ["Vrijeme", "spavanja"],
+      "desc": "Vrijeme mirovanja nakon kojega lemilica spušta temperaturu. (Minute | Sekunde)"
+    },
+    "ShutdownTimeout": {
+      "text2": ["Vrijeme", "gašenja"],
+      "desc": "Vrijeme mirovanja nakon kojega će se lemilica ugasiti. (Minute)"
+    },
+    "MotionSensitivity": {
+      "text2": ["Osjetljivost", "pokreta"],
+      "desc": "Osjetljivost prepoznavanja pokreta. (0=Ugašeno | 1=Najmanje osjetljivo | ... | 9=Najosjetljivije)"
+    },
+    "TemperatureUnit": {
+      "text2": ["Jedinica", "temperature"],
+      "desc": "Jedinica temperature. (C=Celzij | F=Fahrenheit)"
+    },
+    "AdvancedIdle": {
+      "text2": ["Detalji", "pri čekanju"],
+      "desc": "Prikazivanje detaljnih informacija tijekom čekanja."
+    },
+    "DisplayRotation": {
+      "text2": ["Rotacija", "ekrana"],
+      "desc": "Orijentacija ekrana. (D=Desnoruki | L=Ljevoruki | A=Automatski)"
+    },
+    "BoostTemperature": {
+      "text2": ["Boost", "temp"],
+      "desc": "Temperatura u pojačanom (Boost) načinu."
+    },
+    "AutoStart": {
+      "text2": ["Auto", "start"],
+      "desc": "Ako je aktivno, lemilica po uključivanju napajanja odmah počinje grijati. (I=isključeno | L=lemljenje | R=rezervni | S=rezervni sobna temperatura)"
+    },
+    "CooldownBlink": {
+      "text2": ["Upozorenje", "pri hlađenju"],
+      "desc": "Bljeskanje temperature prilikom hlađenja, ako je lemilica vruća."
+    },
+    "TemperatureCalibration": {
+      "text2": ["Kalibracija", "temperature"],
+      "desc": "Kalibriranje temperature mjeri razliku temperatura vrška i drške, dok je lemilica hladna."
+    },
+    "SettingsReset": {
+      "text2": ["Tvorničke", "postavke"],
+      "desc": "Vraćanje svih postavki na tvorničke vrijednosti."
+    },
+    "VoltageCalibration": {
+      "text2": ["Kalibracija", "napona napajanja"],
+      "desc": "Kalibracija ulaznog napona. Podešavanje gumbima, dugački pritisak za kraj."
+    },
+    "AdvancedSoldering": {
+      "text2": ["Detalji", "pri lemljenju"],
+      "desc": "Prikazivanje detaljnih informacija tijekom lemljenja."
+    },
+    "ScrollingSpeed": {
+      "text2": ["Brzina", "poruka"],
+      "desc": "Brzina kretanja dugačkih poruka. (B=brzo | S=sporo)"
+    },
+    "QCMaxVoltage": {
+      "text2": ["Snaga", "napajanja"],
+      "desc": "Snaga modula za napajanje"
+    },
+    "PDNegTimeout": {
+      "text2": ["PD", "timeout"],
+      "desc": "PD negotiation timeout in 100ms steps for compatibility with some QC chargers"
+    },
+    "PowerLimit": {
+      "text2": ["Power", "limit"],
+      "desc": "Maximum power the iron can use (W=watt)"
+    },
+    "ReverseButtonTempChange": {
+      "text2": ["Swap", "+ - keys"],
+      "desc": "Reverse assignment of buttons for temperature adjustment"
+    },
+    "TempChangeShortStep": {
+      "text2": ["Temp change", "short"],
+      "desc": "Temperature-change-increment on short button press"
+    },
+    "TempChangeLongStep": {
+      "text2": ["Temp change", "long"],
+      "desc": "Temperature-change-increment on long button press"
+    },
+    "PowerPulsePower": {
+      "text2": ["Power", "pulse"],
+      "desc": "Intensity of power of keep-awake-pulse (watt)"
+    },
+    "HallEffSensitivity": {
+      "text2": ["Hall sensor", "sensitivity"],
+      "desc": "Sensitivity of the Hall effect sensor to detect sleep (0=Ugašeno | 1=Najmanje osjetljivo | ... | 9=Najosjetljivije)"
+    },
+    "LockingMode": {
+      "text2": ["Allow locking", "buttons"],
+      "desc": "While soldering, hold down both buttons to toggle locking them (D=disable | B=boost mode only | F=full locking)"
+    },
+    "MinVolCell": {
+      "text2": ["Minimum", "voltage"],
+      "desc": "Minimum allowed voltage per cell (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)"
+    },
+    "AnimLoop": {
+      "text2": ["Anim.", "loop"],
+      "desc": "Loop icon animations in main menu"
+    },
+    "AnimSpeed": {
+      "text2": ["Anim.", "speed"],
+      "desc": "Pace of icon animations in menu (O=off | S=slow | M=medium | B=fast)"
+    },
+    "PowerPulseWait": {
+      "text2": ["Power pulse", "delay"],
+      "desc": "Delay before keep-awake-pulse is triggered (x 2.5s)"
+    },
+    "PowerPulseDuration": {
+      "text2": ["Power pulse", "duration"],
+      "desc": "Keep-awake-pulse duration (x 250ms)"
+    },
+    "LanguageSwitch": {
+      "text2": ["Jezik:", " HR    Hrvatski"],
+      "desc": ""
+    },
+    "Brightness": {
+      "text2": ["Screen", "brightness"],
+      "desc": "Adjust the brightness of the OLED screen"
+    },
+    "ColourInversion": {
+      "text2": ["Invert", "screen"],
+      "desc": "Invert the colours of the OLED screen"
+    },
+    "LOGOTime": {
+      "text2": ["Boot logo", "duration"],
+      "desc": "Sets the duration for the boot logo (s=seconds)"
+    }
+  }
+}

Translations/translation_HU.json

@@ -0,0 +1,207 @@
+{
+  "languageCode": "HU",
+  "languageLocalName": "Magyar",
+  "fonts": ["ascii_basic", "latin_extended"],
+  "tempUnitFahrenheit": false,
+  "messages": {
+    "SettingsCalibrationWarning": "Folytatás előtt győződjön meg róla, hogy a forrasztó hegy szobahőmérsékletű!",
+    "SettingsResetWarning": "Biztos visszaállítja a beállításokat alapértékekre?",
+    "UVLOWarningString": "DC TÚL KEVÉS",
+    "UndervoltageString": "Alulfeszültség",
+    "InputVoltageString": "Bemenet V: ",
+    "SleepingSimpleString": "Zzzz",
+    "SleepingAdvancedString": "Alvás...",
+    "SleepingTipAdvancedString": "Hegy:",
+    "OffString": "Ki"
+  },
+  "messagesWarn": {
+    "ResetOKMessage": "Törlés OK",
+    "SettingsResetMessage": ["Beállítások", "visszaállítva!"],
+    "NoAccelerometerMessage": ["Nincs", "gyorsulásmérő!"],
+    "NoPowerDeliveryMessage": ["Nincs", "USB-PD IC!"],
+    "LockingKeysString": "LEZÁRVA",
+    "UnlockingKeysString": "FELOLDVA",
+    "WarningKeysLockedString": "!LEZÁRVA!",
+    "WarningThermalRunaway": ["Kontrollálatlan", "hőmérséklet!"]
+  },
+  "characters": {
+    "SettingRightChar": "J",
+    "SettingLeftChar": "B",
+    "SettingAutoChar": "A",
+    "SettingOffChar": "0",
+    "SettingSlowChar": "L",
+    "SettingMediumChar": "K",
+    "SettingFastChar": "Gy",
+    "SettingStartNoneChar": "K",
+    "SettingStartSolderingChar": "F",
+    "SettingStartSleepChar": "A",
+    "SettingStartSleepOffChar": "Sz",
+    "SettingSensitivityOff": "0",
+    "SettingSensitivityLow": "A",
+    "SettingSensitivityMedium": "K",
+    "SettingSensitivityHigh": "M",
+    "SettingLockDisableChar": "K",
+    "SettingLockBoostChar": "B",
+    "SettingLockFullChar": "T"
+  },
+  "menuGroups": {
+    "PowerMenu": {
+      "text2": ["Táp", "beállítások"],
+      "desc": "Táp beállítások"
+    },
+    "SolderingMenu": {
+      "text2": ["Forrasztási", "beállítások"],
+      "desc": "Forrasztási beállítások"
+    },
+    "PowerSavingMenu": {
+      "text2": ["Alvási", "módok"],
+      "desc": "Energiatakarékossági beállítások"
+    },
+    "UIMenu": {
+      "text2": ["Felhasználói", "felület"],
+      "desc": "Felhasználói felület beállításai"
+    },
+    "AdvancedMenu": {
+      "text2": ["Haladó", "beállítások"],
+      "desc": "Haladó beállítások"
+    }
+  },
+  "menuOptions": {
+    "DCInCutoff": {
+      "text2": ["Áram", "forrás"],
+      "desc": "Kikapcsolási feszültség beállítása (DC:10V | S:3.3V/LiPo cella | ki)"
+    },
+    "SleepTemperature": {
+      "text2": ["Alvási", "hőmérséklet"],
+      "desc": "Hőmérséklet alvó módban (C | F)"
+    },
+    "SleepTimeout": {
+      "text2": ["Alvás", "időzítő"],
+      "desc": "Alvási időzítő (perc | másodperc)"
+    },
+    "ShutdownTimeout": {
+      "text2": ["Kikapcsolás", "időzítő"],
+      "desc": "Kikapcsolási időzítő (perc)"
+    },
+    "MotionSensitivity": {
+      "text2": ["Mozgás", "érzékenység"],
+      "desc": "Mozgás érzékenység beállítása (0=kikapcsolva | 1=legkevésbé érzékeny | ... | 9=legérzékenyebb)"
+    },
+    "TemperatureUnit": {
+      "text2": ["Hőmérséklet", "mértékegysége"],
+      "desc": "Hőmérséklet mértékegysége (C=Celsius | F=Fahrenheit)"
+    },
+    "AdvancedIdle": {
+      "text2": ["Részletes", "készenlét"],
+      "desc": "Részletes információk megjelenítése kisebb betűméretben a készenléti képernyőn"
+    },
+    "DisplayRotation": {
+      "text2": ["Kijelző", "tájolása"],
+      "desc": "Kijelző tájolása (J=jobbkezes | B=balkezes | A=automatikus)"
+    },
+    "BoostTemperature": {
+      "text2": ["Boost", "hőmérséklet"],
+      "desc": "Hőmérséklet \"boost\" módban"
+    },
+    "AutoStart": {
+      "text2": ["Automatikus", "indítás"],
+      "desc": "Bekapcsolás után automatikusan lépjen forrasztás módba (K=ki | F=forrasztás | A=alvó mód | Sz=szobahőmérséklet)"
+    },
+    "CooldownBlink": {
+      "text2": ["Villogás", "hűléskor"],
+      "desc": "Villogjon a hőmérséklet kijelzése hűlés közben, amíg a forrasztó hegy forró"
+    },
+    "TemperatureCalibration": {
+      "text2": ["Hőmérséklet", "kalibrálása?"],
+      "desc": "Forrasztó hegy hőmérséklet-érzékelőjének kalibrálása"
+    },
+    "SettingsReset": {
+      "text2": ["Gyári", "beállítások?"],
+      "desc": "Beállítások alaphelyzetbe állítása"
+    },
+    "VoltageCalibration": {
+      "text2": ["Bemeneti fesz.", "kalibrálása?"],
+      "desc": "Bemeneti feszültség kalibrálása (hosszan nyomva kilép)"
+    },
+    "AdvancedSoldering": {
+      "text2": ["Részletes", "forrasztás infó"],
+      "desc": "Részletes információk megjelenítése forrasztás közben"
+    },
+    "ScrollingSpeed": {
+      "text2": ["Görgetés", "sebessége"],
+      "desc": "Szöveggörgetés sebessége"
+    },
+    "QCMaxVoltage": {
+      "text2": ["Max. USB", "feszültség"],
+      "desc": "Maximális USB feszültség (QuickCharge)"
+    },
+    "PDNegTimeout": {
+      "text2": ["PD", "időtúllépés"],
+      "desc": "PD egyeztetés időkerete (kompatibilitás QC töltőkkel) (x 100ms)"
+    },
+    "PowerLimit": {
+      "text2": ["Teljesítmény", "maximum"],
+      "desc": "Maximális felvett teljesitmény beállitása"
+    },
+    "ReverseButtonTempChange": {
+      "text2": ["+/- gomb", "megfordítása"],
+      "desc": "Forrasztó hegy hőmérsékletállító gombok felcserélése"
+    },
+    "TempChangeShortStep": {
+      "text2": ["Hőm. állítás", "rövid"],
+      "desc": "Hőmérséklet állítás rövid gombnyomásra (C | F)"
+    },
+    "TempChangeLongStep": {
+      "text2": ["Hőm. állítás", "hosszú"],
+      "desc": "Hőmérséklet állítás hosszú gombnyomásra (C | F)"
+    },
+    "PowerPulsePower": {
+      "text2": ["Ébr. pulzus", "nagysága"],
+      "desc": "Powerbankot ébrentartó áramfelvételi pulzusok nagysága (W)"
+    },
+    "HallEffSensitivity": {
+      "text2": ["Alvásérzékelő", "érzékenység"],
+      "desc": "Alvásérzékelő gyorsulásmérő érzékenysége (0=kikapcsolva | 1=legkevésbé érzékeny | ... | 9=legérzékenyebb)"
+    },
+    "LockingMode": {
+      "text2": ["Lezárás", "engedélyezés"],
+      "desc": "Forrasztás közben mindkét gombot hosszan lenyomva lezárja a kezelést (K=ki | B=csak \"boost\" módban | T=teljes lezárás)"
+    },
+    "MinVolCell": {
+      "text2": ["Minimum", "feszültség"],
+      "desc": "Minimális engedélyezett cellafeszültség (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)"
+    },
+    "AnimLoop": {
+      "text2": ["Folytonos", "animáció"],
+      "desc": "Főmenü ikonjainak folytonos animációja"
+    },
+    "AnimSpeed": {
+      "text2": ["Animáció", "sebessége"],
+      "desc": "Menüikonok animációjának sebessége (0=ki | L=lassú | K=közepes | Gy=gyors)"
+    },
+    "PowerPulseWait": {
+      "text2": ["Ébr. pulzus", "időköze"],
+      "desc": "Powerbankot ébrentartó áramfelvételi pulzusok időköze (x 2.5s)"
+    },
+    "PowerPulseDuration": {
+      "text2": ["Ébr. pulzus", "időtartama"],
+      "desc": "Powerbankot ébrentartó áramfelvételi pulzusok időtartama (x 250ms)"
+    },
+    "LanguageSwitch": {
+      "text2": ["Nyelv:", " HU      Magyar"],
+      "desc": "Firmware nyelve"
+    },
+    "Brightness": {
+      "text2": ["Képernyő", "kontraszt"],
+      "desc": "Képernyő kontrasztjának állítása"
+    },
+    "ColourInversion": {
+      "text2": ["Képernyő", "invertálás"],
+      "desc": "Képernyő színeinek invertálása"
+    },
+    "LOGOTime": {
+      "text2": ["Boot logo", "duration"],
+      "desc": "Sets the duration for the boot logo (s=seconds)"
+    }
+  }
+}

Translations/translation_IT.json

@@ -0,0 +1,207 @@
+{
+  "languageCode": "IT",
+  "languageLocalName": "Italiano",
+  "fonts": ["ascii_basic", "latin_extended"],
+  "tempUnitFahrenheit": false,
+  "messages": {
+    "SettingsCalibrationWarning": "Assicurarsi che la punta si trovi a temperatura ambiente prima di continuare!",
+    "SettingsResetWarning": "Ripristinare le impostazioni iniziali?",
+    "UVLOWarningString": "DC BASSA",
+    "UndervoltageString": "DC INSUFFICIENTE",
+    "InputVoltageString": "V in:",
+    "SleepingSimpleString": "Zzz ",
+    "SleepingAdvancedString": "Riposo",
+    "SleepingTipAdvancedString": "Punta:",
+    "OffString": "OFF"
+  },
+  "messagesWarn": {
+    "ResetOKMessage": "Reset OK",
+    "SettingsResetMessage": ["Impostazioni", "ripristinate"],
+    "NoAccelerometerMessage": ["Accelerometro", "non rilevato"],
+    "NoPowerDeliveryMessage": ["USB PD", "non rilevato"],
+    "LockingKeysString": "Blocc.",
+    "UnlockingKeysString": "Sblocc.",
+    "WarningKeysLockedString": "BLOCCATO",
+    "WarningThermalRunaway": ["Temperatura", "fuori controllo"]
+  },
+  "characters": {
+    "SettingRightChar": "D",
+    "SettingLeftChar": "S",
+    "SettingAutoChar": "A",
+    "SettingOffChar": "O",
+    "SettingSlowChar": "L",
+    "SettingMediumChar": "M",
+    "SettingFastChar": "V",
+    "SettingStartNoneChar": "D",
+    "SettingStartSolderingChar": "S",
+    "SettingStartSleepChar": "R",
+    "SettingStartSleepOffChar": "A",
+    "SettingSensitivityOff": "O",
+    "SettingSensitivityLow": "B",
+    "SettingSensitivityMedium": "M",
+    "SettingSensitivityHigh": "A",
+    "SettingLockDisableChar": "D",
+    "SettingLockBoostChar": "T",
+    "SettingLockFullChar": "C"
+  },
+  "menuGroups": {
+    "PowerMenu": {
+      "text2": ["Opzioni", "alimentaz"],
+      "desc": "Menù d'impostazioni per l'alimentazione"
+    },
+    "SolderingMenu": {
+      "text2": ["Opzioni", "saldatura"],
+      "desc": "Menù d'impostazioni della modalità Saldatura"
+    },
+    "PowerSavingMenu": {
+      "text2": ["Risparmio", "energetico"],
+      "desc": "Menù d'impostazioni per il risparmio energetico"
+    },
+    "UIMenu": {
+      "text2": ["Interfaccia", "utente"],
+      "desc": "Menù d'impostazioni dell'interfaccia utente"
+    },
+    "AdvancedMenu": {
+      "text2": ["Opzioni", "avanzate"],
+      "desc": "Menù d'impostazioni avanzate"
+    }
+  },
+  "menuOptions": {
+    "DCInCutoff": {
+      "text2": ["Sorgente", "alimentaz"],
+      "desc": "Imposta una tensione minima di alimentazione attraverso la selezione di una sorgente [DC: 10 V; 3S/4S/5S/6S: 3,3 V per cella]"
+    },
+    "SleepTemperature": {
+      "text2": ["Temp", "riposo"],
+      "desc": "Imposta la temperatura da mantenere in modalità Riposo [°C/°F]"
+    },
+    "SleepTimeout": {
+      "text2": ["Timer", "riposo"],
+      "desc": "Imposta il timer per entrare in modalità Riposo [secondi/minuti]"
+    },
+    "ShutdownTimeout": {
+      "text2": ["Timer", "spegnimento"],
+      "desc": "Imposta il timer per lo spegnimento [minuti]"
+    },
+    "MotionSensitivity": {
+      "text2": ["Sensibilità", "al movimento"],
+      "desc": "Imposta la sensibilità al movimento per uscire dalla modalità Riposo [0: nessuna; 1: minima; 9: massima]"
+    },
+    "TemperatureUnit": {
+      "text2": ["Unità di", "temperatura"],
+      "desc": "Scegli l'unità di misura per la temperatura [C: grado Celsius; F: grado Farenheit]"
+    },
+    "AdvancedIdle": {
+      "text2": ["Interfaccia", "testuale"],
+      "desc": "Mostra informazioni dettagliate all'interno della schermata principale"
+    },
+    "DisplayRotation": {
+      "text2": ["Orientamento", "schermo"],
+      "desc": "Imposta l'orientamento dello schermo [D: mano destra; S: mano sinistra; A: automatico]"
+    },
+    "BoostTemperature": {
+      "text2": ["Temp", "Turbo"],
+      "desc": "Imposta la temperatura della funzione Turbo [°C/°F]"
+    },
+    "AutoStart": {
+      "text2": ["Avvio", "automatico"],
+      "desc": "Attiva automaticamente il saldatore quando viene alimentato [D: disattiva; S: saldatura; R: riposo; A: temperatura ambiente]"
+    },
+    "CooldownBlink": {
+      "text2": ["Avviso", "punta calda"],
+      "desc": "Evidenzia il valore di temperatura durante il raffreddamento se la punta è ancora calda"
+    },
+    "TemperatureCalibration": {
+      "text2": ["Calibrazione", "temperatura"],
+      "desc": "Calibra le rilevazioni di temperatura"
+    },
+    "SettingsReset": {
+      "text2": ["Ripristino", "impostazioni"],
+      "desc": "Ripristina le impostazioni allo stato iniziale"
+    },
+    "VoltageCalibration": {
+      "text2": ["Calibrazione", "tensione"],
+      "desc": "Calibra la tensione in ingresso; regola con entrambi i tasti, tieni premuto il tasto superiore per uscire"
+    },
+    "AdvancedSoldering": {
+      "text2": ["Dettagli", "saldatura"],
+      "desc": "Mostra informazioni dettagliate durante la modalità Saldatura"
+    },
+    "ScrollingSpeed": {
+      "text2": ["Velocità", "testo"],
+      "desc": "Imposta la velocità di scorrimento del testo [L: lenta; V: veloce]"
+    },
+    "QCMaxVoltage": {
+      "text2": ["Voltaggio", "QC"],
+      "desc": "Imposta il massimo voltaggio negoziabile con un alimentatore Quick Charge [volt]"
+    },
+    "PDNegTimeout": {
+      "text2": ["Abilitazione", "USB PD"],
+      "desc": "Regola il massimo tempo utile per la negoziazione del protocollo USB Power Delivery con alimentatori compatibili [0: disattiva; multipli di 100 ms]"
+    },
+    "PowerLimit": {
+      "text2": ["Limite", "potenza"],
+      "desc": "Imposta il valore di potenza massima erogabile al saldatore [watt]"
+    },
+    "ReverseButtonTempChange": {
+      "text2": ["Inversione", "tasti"],
+      "desc": "Inverti i tasti per aumentare o diminuire la temperatura della punta"
+    },
+    "TempChangeShortStep": {
+      "text2": ["Temp passo", "breve"],
+      "desc": "Imposta il passo dei valori di temperatura per una breve pressione dei tasti"
+    },
+    "TempChangeLongStep": {
+      "text2": ["Temp passo", "lungo"],
+      "desc": "Imposta il passo dei valori di temperatura per una lunga pressione dei tasti"
+    },
+    "PowerPulsePower": {
+      "text2": ["Potenza", "impulso"],
+      "desc": "Regola la potenza di un \"impulso sveglia\" atto a prevenire lo standby eventuale dell'alimentatore [watt]"
+    },
+    "HallEffSensitivity": {
+      "text2": ["Sensore", "Hall"],
+      "desc": "Regola la sensibilità del sensore ad effetto Hall per entrare in modalità Riposo [0: nessuna; 1: minima; 9: massima]"
+    },
+    "LockingMode": {
+      "text2": ["Blocco", "tasti"],
+      "desc": "Blocca i tasti durante la modalità Saldatura; tieni premuto entrambi per bloccare o sbloccare [D: disattiva; T: consenti Turbo; C: blocco completo]"
+    },
+    "MinVolCell": {
+      "text2": ["Tensione", "min celle"],
+      "desc": "Modifica la tensione di minima carica delle celle di una batteria Li-Po [3S: 3,0-3,7 V; 4S/5S/6S: 2,4-3,7 V]"
+    },
+    "AnimLoop": {
+      "text2": ["Ciclo", "animazioni"],
+      "desc": "Abilita la riproduzione ciclica delle animazioni del menù principale"
+    },
+    "AnimSpeed": {
+      "text2": ["Velocità", "animazioni"],
+      "desc": "Imposta la velocità di riproduzione delle animazioni del menù principale [O: OFF; L: lenta; M: media; V: veloce]"
+    },
+    "PowerPulseWait": {
+      "text2": ["Distanza", "impulsi"],
+      "desc": "Imposta il tempo che deve intercorrere tra due \"impulsi sveglia\" [multipli di 2,5 s]"
+    },
+    "PowerPulseDuration": {
+      "text2": ["Durata", "impulso"],
+      "desc": "Regola la durata dell'«impulso sveglia» [multipli di 250 ms]"
+    },
+    "LanguageSwitch": {
+      "text2": ["Lingua:", " IT Italiano"],
+      "desc": "Imposta la lingua del dispositivo"
+    },
+    "Brightness": {
+      "text2": ["Luminosità", "schermo"],
+      "desc": "Regola la luminosità dello schermo [1: minimo; 10: massimo]"
+    },
+    "ColourInversion": {
+      "text2": ["Inverti", "colori"],
+      "desc": "Inverti i colori dello schermo"
+    },
+    "LOGOTime": {
+      "text2": ["Durata", "logo"],
+      "desc": "Imposta la permanenza sullo schermo del logo iniziale [secondi]"
+    }
+  }
+}

Translations/translation_JA_JP.json

@@ -0,0 +1,207 @@
+{
+  "languageCode": "JA_JP",
+  "languageLocalName": "日本語",
+  "fonts": ["ascii_basic", "cjk"],
+  "tempUnitFahrenheit": true,
+  "messages": {
+    "SettingsCalibrationWarning": "続行する前に、コテ先が室温と同じになっていることを確認してください",
+    "SettingsResetWarning": "設定をリセットしますか？",
+    "UVLOWarningString": "電圧が低すぎます",
+    "UndervoltageString": "Undervoltage",
+    "InputVoltageString": "Input V: ",
+    "SleepingSimpleString": "Zzzz",
+    "SleepingAdvancedString": "Sleeping...",
+    "SleepingTipAdvancedString": "Tip:",
+    "OffString": "オフ"
+  },
+  "messagesWarn": {
+    "ResetOKMessage": "リセットOK",
+    "SettingsResetMessage": "初期化されました",
+    "NoAccelerometerMessage": "加速度計未検出",
+    "NoPowerDeliveryMessage": "PD IC未検出",
+    "LockingKeysString": "ボタンロック",
+    "UnlockingKeysString": "ロックを解除",
+    "WarningKeysLockedString": "!入力ロック中!",
+    "WarningThermalRunaway": "過熱"
+  },
+  "characters": {
+    "SettingRightChar": "右",
+    "SettingLeftChar": "左",
+    "SettingAutoChar": "自",
+    "SettingOffChar": "×",
+    "SettingSlowChar": "遅",
+    "SettingMediumChar": "中",
+    "SettingFastChar": "速",
+    "SettingStartNoneChar": "×",
+    "SettingStartSolderingChar": "熱",
+    "SettingStartSleepChar": "待",
+    "SettingStartSleepOffChar": "室",
+    "SettingSensitivityOff": "×",
+    "SettingSensitivityLow": "低",
+    "SettingSensitivityMedium": "中",
+    "SettingSensitivityHigh": "高",
+    "SettingLockDisableChar": "×",
+    "SettingLockBoostChar": "ブ",
+    "SettingLockFullChar": "全"
+  },
+  "menuGroups": {
+    "PowerMenu": {
+      "text2": "電源設定",
+      "desc": "電源設定"
+    },
+    "SolderingMenu": {
+      "text2": "半田付け設定",
+      "desc": "半田付け設定"
+    },
+    "PowerSavingMenu": {
+      "text2": "待機設定",
+      "desc": "待機設定"
+    },
+    "UIMenu": {
+      "text2": "UI設定",
+      "desc": "ユーザーインターフェイスの設定"
+    },
+    "AdvancedMenu": {
+      "text2": "高度な設定",
+      "desc": "高度な設定"
+    }
+  },
+  "menuOptions": {
+    "DCInCutoff": {
+      "text2": "下限電圧",
+      "desc": "下限電圧を指定する <DC=10V | S=セルあたり3.3V、電力制限を無効化>"
+    },
+    "SleepTemperature": {
+      "text2": "待機温度",
+      "desc": "スタンバイ時のコテ先温度"
+    },
+    "SleepTimeout": {
+      "text2": "待機遅延",
+      "desc": "スタンバイモードに入るまでの待機時間 <s=秒 | m=分>"
+    },
+    "ShutdownTimeout": {
+      "text2": "自動オフ",
+      "desc": "自動電源オフまでの待機時間 <m=分>"
+    },
+    "MotionSensitivity": {
+      "text2": "動きの感度",
+      "desc": "0=オフ | 1=最低感度 | ... | 9=最高感度"
+    },
+    "TemperatureUnit": {
+      "text2": "温度単位",
+      "desc": "C=摂氏 | F=華氏"
+    },
+    "AdvancedIdle": {
+      "text2": "詳細な待受画面",
+      "desc": "待ち受け画面に詳細情報を表示する"
+    },
+    "DisplayRotation": {
+      "text2": "画面の向き",
+      "desc": "右=右利き | 左=左利き | 自=自動"
+    },
+    "BoostTemperature": {
+      "text2": "ブースト温度",
+      "desc": "ブーストモードで使用される温度"
+    },
+    "AutoStart": {
+      "text2": "自動加熱",
+      "desc": "電源投入時に自動的に加熱する <×=オフ | 熱=半田付けモード | 待=スタンバイモード | 室=室温スタンバイモード>"
+    },
+    "CooldownBlink": {
+      "text2": "冷却中に点滅",
+      "desc": "加熱の停止後、コテ先が熱い間は温度表示を点滅する"
+    },
+    "TemperatureCalibration": {
+      "text2": "温度校正",
+      "desc": "コテ先の温度校正を開始する"
+    },
+    "SettingsReset": {
+      "text2": "設定をリセット",
+      "desc": "すべての設定を初期化する"
+    },
+    "VoltageCalibration": {
+      "text2": "電圧校正",
+      "desc": "入力電圧(VIN)の校正を開始する <長押しで終了>"
+    },
+    "AdvancedSoldering": {
+      "text2": "詳細な作業画面",
+      "desc": "半田付け画面に詳細情報を表示する"
+    },
+    "ScrollingSpeed": {
+      "text2": "スクロール速度",
+      "desc": "テキストをスクロールする速さ <遅=遅い | 速=速い>"
+    },
+    "QCMaxVoltage": {
+      "text2": "QC電圧",
+      "desc": "QC電源使用時に要求する目標電圧"
+    },
+    "PDNegTimeout": {
+      "text2": ["PD", "timeout"],
+      "desc": "一部のQC電源との互換性のため、PDネゴシエーションをタイムアウトする時間 <x100ms（ミリ秒）>"
+    },
+    "PowerLimit": {
+      "text2": "電力制限",
+      "desc": "最大電力を制限する <W=ワット>"
+    },
+    "ReverseButtonTempChange": {
+      "text2": "キー入れ替え",
+      "desc": "温度設定時に+ボタンと-ボタンを入れ替える"
+    },
+    "TempChangeShortStep": {
+      "text2": "温度変化 短",
+      "desc": "ボタンを短く押した時の温度変化値"
+    },
+    "TempChangeLongStep": {
+      "text2": "温度変化 長",
+      "desc": "ボタンを長押しした時の温度変化値"
+    },
+    "PowerPulsePower": {
+      "text2": "電力パルス",
+      "desc": "電源をオンに保つための電力パルス <ワット>"
+    },
+    "HallEffSensitivity": {
+      "text2": "磁界感度",
+      "desc": "スタンバイモードに入るのに使用される磁場センサーの感度 <0=オフ | 1=最低感度 | ... | 9=最高感度>"
+    },
+    "LockingMode": {
+      "text2": "ボタンロック",
+      "desc": "半田付けモード時に両方のボタンを長押しし、ボタンロックする <×=オフ | ブ=ブーストのみ許可 | 全=すべてをロック>"
+    },
+    "MinVolCell": {
+      "text2": "最低電圧",
+      "desc": "セルあたりの最低電圧 <ボルト> <3S: 3.0V - 3.7V, 4/5/6S: 2.4V - 3.7V>"
+    },
+    "AnimLoop": {
+      "text2": "動画をループ",
+      "desc": "メニューアイコンのアニメーションをループする"
+    },
+    "AnimSpeed": {
+      "text2": "動画の速度",
+      "desc": "メニューアイコンのアニメーションの速さ <×=再生しない | 遅=低速 | 中=中速 | 速=高速>"
+    },
+    "PowerPulseWait": {
+      "text2": "パルス間隔",
+      "desc": "電源をオンに保つための電力パルスの時間間隔 <x2.5s（秒）>"
+    },
+    "PowerPulseDuration": {
+      "text2": "パルス時間長",
+      "desc": "電源をオンに保つための電力パルスの時間長 <x250ms（ミリ秒）>"
+    },
+    "LanguageSwitch": {
+      "text2": "言語： 日本語",
+      "desc": ""
+    },
+    "Brightness": {
+      "text2": "画面輝度",
+      "desc": "画面の明るさ・コントラストを変更する"
+    },
+    "ColourInversion": {
+      "text2": "色反転",
+      "desc": "画面の色を反転する"
+    },
+    "LOGOTime": {
+      "text2": ["Boot logo", "duration"],
+      "desc": "Sets the duration for the boot logo (s=seconds)"
+    }
+  }
+}

Translations/translation_LT.json

@@ -0,0 +1,207 @@
+{
+  "languageCode": "LT",
+  "languageLocalName": "Lietuvių",
+  "fonts": ["ascii_basic", "latin_extended"],
+  "tempUnitFahrenheit": false,
+  "messages": {
+    "SettingsCalibrationWarning": "Prieš tęsdami įsitikinkite, kad antgalis yra kambario temperatūros!",
+    "SettingsResetWarning": "Ar norite atstatyti nustatymus į numatytas reikšmes?",
+    "UVLOWarningString": "MAŽ VOLT",
+    "UndervoltageString": "Žema įtampa",
+    "InputVoltageString": "Įvestis V: ",
+    "SleepingSimpleString": "Zzzz",
+    "SleepingAdvancedString": "Miegu...",
+    "SleepingTipAdvancedString": "Antg:",
+    "OffString": "Išj"
+  },
+  "messagesWarn": {
+    "ResetOKMessage": "Atstatyta",
+    "SettingsResetMessage": ["Nust. atstatyti!", ""],
+    "NoAccelerometerMessage": ["Nerastas", "akselerometras!"],
+    "NoPowerDeliveryMessage": ["Nerastas", "USB-PD IC!"],
+    "LockingKeysString": "UŽRAKIN",
+    "UnlockingKeysString": "ATRAKIN",
+    "WarningKeysLockedString": "!UŽRAK!",
+    "WarningThermalRunaway": ["Perkaitimo", "pavojus"]
+  },
+  "characters": {
+    "SettingRightChar": "D",
+    "SettingLeftChar": "K",
+    "SettingAutoChar": "A",
+    "SettingOffChar": "I",
+    "SettingSlowChar": "L",
+    "SettingMediumChar": "V",
+    "SettingFastChar": "G",
+    "SettingStartNoneChar": "N",
+    "SettingStartSolderingChar": "T",
+    "SettingStartSleepChar": "M",
+    "SettingStartSleepOffChar": "K",
+    "SettingSensitivityOff": "I",
+    "SettingSensitivityLow": "Ž",
+    "SettingSensitivityMedium": "V",
+    "SettingSensitivityHigh": "A",
+    "SettingLockDisableChar": "I",
+    "SettingLockBoostChar": "T",
+    "SettingLockFullChar": "V"
+  },
+  "menuGroups": {
+    "PowerMenu": {
+      "text2": ["Maitinimo", "nustatymai"],
+      "desc": "Su maitinblokiu susiję nustatymai"
+    },
+    "SolderingMenu": {
+      "text2": ["Litavimo", "nustatymai"],
+      "desc": "Litavimo nustatymai"
+    },
+    "PowerSavingMenu": {
+      "text2": ["Miego", "režimai"],
+      "desc": "Energijos tausojimo nustatymai"
+    },
+    "UIMenu": {
+      "text2": ["Naudotojo", "sąsaja"],
+      "desc": "Naudotojo sąsajos nustatymai"
+    },
+    "AdvancedMenu": {
+      "text2": ["Išplėsti.", "nustatymai"],
+      "desc": "Išplėstiniai nustatymai"
+    }
+  },
+  "menuOptions": {
+    "DCInCutoff": {
+      "text2": ["Maitinimo", "šaltinis"],
+      "desc": "Išjungimo įtampa. (DC 10V) (arba celių [S] kiekis [3.3V per celę])"
+    },
+    "SleepTemperature": {
+      "text2": ["Miego", "temperat."],
+      "desc": "Antgalio temperatūra miego režimu"
+    },
+    "SleepTimeout": {
+      "text2": ["Miego", "laikas"],
+      "desc": "Užmigimo laikas (sekundės | minutės)"
+    },
+    "ShutdownTimeout": {
+      "text2": ["Išjungimo", "laikas"],
+      "desc": "Išjungimo laikas (minutės)"
+    },
+    "MotionSensitivity": {
+      "text2": ["Judesio", "jautrumas"],
+      "desc": "Judesio jautrumas (0=Išjungta | 1=Mažiausias | ... | 9=Didžiausias)"
+    },
+    "TemperatureUnit": {
+      "text2": ["Temperatūros", "vienetai"],
+      "desc": "Temperatūros vienetai (C=Celsijus | F=Farenheitas)"
+    },
+    "AdvancedIdle": {
+      "text2": ["Detalus lau-", "kimo ekranas"],
+      "desc": "Ar rodyti papildomą informaciją mažesniu šriftu laukimo ekrane"
+    },
+    "DisplayRotation": {
+      "text2": ["Ekrano", "orientacija"],
+      "desc": "Ekrano orientacija (D=Dešiniarankiams | K=Kairiarankiams | A=Automatinė)"
+    },
+    "BoostTemperature": {
+      "text2": ["Turbo", "temperat."],
+      "desc": "Temperatūra turbo režimu"
+    },
+    "AutoStart": {
+      "text2": ["Automatinis", "paleidimas"],
+      "desc": "Ar pradėti kaitininti iš karto įjungus lituoklį (N=Ne | T=Taip | M=Miegas | K=Miegoti kambario temperatūroje)"
+    },
+    "CooldownBlink": {
+      "text2": ["Atvėsimo", "mirksėjimas"],
+      "desc": "Ar mirksėti temperatūrą ekrane kol vėstantis antgalis vis dar karštas?"
+    },
+    "TemperatureCalibration": {
+      "text2": ["Kalibruoti", "temperatūrą?"],
+      "desc": "Antgalio temperatūros kalibravimas"
+    },
+    "SettingsReset": {
+      "text2": ["Atstatyti", "nustatymus?"],
+      "desc": "Nustato nustatymus į numatytuosius"
+    },
+    "VoltageCalibration": {
+      "text2": ["Kalibruoti", "įvesties įtampą?"],
+      "desc": "Įvesties įtampos kalibravimas. Trumpai paspauskite, norėdami nustatyti, ilgai paspauskite, kad išeitumėte."
+    },
+    "AdvancedSoldering": {
+      "text2": ["Detalus lita-", "vimo ekranas"],
+      "desc": "Ar rodyti išsamią informaciją lituojant"
+    },
+    "ScrollingSpeed": {
+      "text2": ["Aprašymo", "greitis"],
+      "desc": "Greitis, kuriuo šis tekstas slenka"
+    },
+    "QCMaxVoltage": {
+      "text2": ["QC mait.", "įtampa"],
+      "desc": "Maksimali QC maitinimo bloko įtampa"
+    },
+    "PDNegTimeout": {
+      "text2": ["PD", "laikas"],
+      "desc": "PD suderinimo laikas žingsniais po 100ms suderinamumui su kai kuriais QC įkrovikliais"
+    },
+    "PowerLimit": {
+      "text2": ["Galios", "riba"],
+      "desc": "Didžiausia galia, kurią gali naudoti lituoklis (Vatai)"
+    },
+    "ReverseButtonTempChange": {
+      "text2": ["Sukeisti + -", "mygtukus?"],
+      "desc": "Sukeisti + - temperatūros keitimo mygtukus vietomis"
+    },
+    "TempChangeShortStep": {
+      "text2": ["Temp.keitim.", "trump.spust."],
+      "desc": "Temperatūros keitimo žingsnis trumpai spustėlėjus mygtuką"
+    },
+    "TempChangeLongStep": {
+      "text2": ["Temp.keitim.", "ilgas pasp."],
+      "desc": "Temperatūros keitimo žingsnis ilgai paspaudus mygtuką"
+    },
+    "PowerPulsePower": {
+      "text2": ["Galios", "pulso W"],
+      "desc": "Periodinis galios pulso intensyvumas maitinblokiui, neleidžiantis jam užmigti."
+    },
+    "HallEffSensitivity": {
+      "text2": ["Holo", "jutiklis"],
+      "desc": "Holo jutiklio jautrumas nustatant miegą (0=Išjungta | 1=Mažiausias | ... | 9=Didžiausias)"
+    },
+    "LockingMode": {
+      "text2": ["Mygtukų", "užraktas"],
+      "desc": "Lituodami, ilgai paspauskite abu mygtukus, kad juos užrakintumėte (I=Išjungta | T=leidžiamas tik Turbo režimas | V=Visiškas užrakinimas)"
+    },
+    "MinVolCell": {
+      "text2": ["Minimalus", "voltažas"],
+      "desc": "Minimalus voltažas, kuris yra leidžiamas kiekvienam baterijos elementui (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)"
+    },
+    "AnimLoop": {
+      "text2": ["Animacijų", "pakartojimas"],
+      "desc": "Leidžia kartoti animacijas be sustojimo pagrindiniame meniu"
+    },
+    "AnimSpeed": {
+      "text2": ["Animacijų", "greitis"],
+      "desc": "Paveiksliukų animacijų greitis meniu punktuose (I=Išjungtas | L=Lėtas | V=Vidutinis | G=Greitas)"
+    },
+    "PowerPulseWait": {
+      "text2": ["Galios pulso", "dažnumas"],
+      "desc": "Pasikartojantis laiko intervalas (x 2.5s), ties kuriuo kartojamas galios pulsas maitinblokiui, neleidžiantis jam užmigti"
+    },
+    "PowerPulseDuration": {
+      "text2": ["Galios pulso", "trukmė"],
+      "desc": "Galios pulso aktyvioji trukmė (x 250ms)"
+    },
+    "LanguageSwitch": {
+      "text2": ["Kalba:", " LT    Lietuvių"],
+      "desc": "Dabartinė programinės įrangos kalba"
+    },
+    "Brightness": {
+      "text2": ["Ekrano", "šviesumas"],
+      "desc": "Nustato OLED ekrano kontrastą/šviesumą."
+    },
+    "ColourInversion": {
+      "text2": ["Ekrano", "invertavimas"],
+      "desc": "Invertuoja OLED ekrano spalvas"
+    },
+    "LOGOTime": {
+      "text2": ["Boot logo", "duration"],
+      "desc": "Sets the duration for the boot logo (s=seconds)"
+    }
+  }
+}

Translations/translation_NL.json

@@ -0,0 +1,207 @@
+{
+  "languageCode": "NL",
+  "languageLocalName": "Nederlands",
+  "fonts": ["ascii_basic", "latin_extended"],
+  "tempUnitFahrenheit": false,
+  "messages": {
+    "SettingsCalibrationWarning": "Zorg ervoor dat te punt op kamertemperatuur is voor je verder gaat!",
+    "SettingsResetWarning": "Weet je zeker dat je de fabrieksinstellingen terug wil zetten?",
+    "UVLOWarningString": "DC Laag",
+    "UndervoltageString": "Onderspanning",
+    "InputVoltageString": "Input V: ",
+    "SleepingSimpleString": "Zzzz",
+    "SleepingAdvancedString": "Slaapstand...",
+    "SleepingTipAdvancedString": "Punt:",
+    "OffString": "Uit"
+  },
+  "messagesWarn": {
+    "ResetOKMessage": "Reset OK",
+    "SettingsResetMessage": ["Instellingen", "zijn gereset!"],
+    "NoAccelerometerMessage": ["No accelerometer", "detected!"],
+    "NoPowerDeliveryMessage": ["No USB-PD IC", "detected!"],
+    "LockingKeysString": " GEBLOKKEERD",
+    "UnlockingKeysString": "GEDEBLOKKEERD",
+    "WarningKeysLockedString": "!GEBLOKKEERD!",
+    "WarningThermalRunaway": ["Thermal", "Runaway"]
+  },
+  "characters": {
+    "SettingRightChar": "R",
+    "SettingLeftChar": "L",
+    "SettingAutoChar": "A",
+    "SettingOffChar": "O",
+    "SettingSlowChar": "S",
+    "SettingMediumChar": "M",
+    "SettingFastChar": "F",
+    "SettingStartNoneChar": "F",
+    "SettingStartSolderingChar": "T",
+    "SettingStartSleepChar": "S",
+    "SettingStartSleepOffChar": "K",
+    "SettingSensitivityOff": "O",
+    "SettingSensitivityLow": "L",
+    "SettingSensitivityMedium": "M",
+    "SettingSensitivityHigh": "H",
+    "SettingLockDisableChar": "U",
+    "SettingLockBoostChar": "B",
+    "SettingLockFullChar": "V"
+  },
+  "menuGroups": {
+    "PowerMenu": {
+      "text2": ["Power", "settings"],
+      "desc": "Power settings"
+    },
+    "SolderingMenu": {
+      "text2": ["Soldeer", "Instellingen"],
+      "desc": "Soldeer instellingen"
+    },
+    "PowerSavingMenu": {
+      "text2": ["Slaap", "Modes"],
+      "desc": "Stroom besparings instellingen"
+    },
+    "UIMenu": {
+      "text2": ["Gebruikers-", "interface"],
+      "desc": "Gebruikers-interface instellingen"
+    },
+    "AdvancedMenu": {
+      "text2": ["Geavanceerde", "Instellingen"],
+      "desc": "Geavanceerde Instellingen"
+    }
+  },
+  "menuOptions": {
+    "DCInCutoff": {
+      "text2": ["Spannings-", "bron"],
+      "desc": "Spanningsbron. Stelt drempelspanning in. (DC 10V) (S 3.3V per cel)"
+    },
+    "SleepTemperature": {
+      "text2": ["Slaap", "temp"],
+      "desc": "Temperatuur in slaapstand"
+    },
+    "SleepTimeout": {
+      "text2": ["Slaap", "time-out"],
+      "desc": "Slaap time-out (Minuten | Seconden)"
+    },
+    "ShutdownTimeout": {
+      "text2": ["Uitschakel", "time-out"],
+      "desc": "Automatisch afsluiten time-out (Minuten)"
+    },
+    "MotionSensitivity": {
+      "text2": ["Bewegings-", "gevoeligheid"],
+      "desc": "Bewegingsgevoeligheid (0=uit | 1=minst gevoelig | ... | 9=meest gevoelig)"
+    },
+    "TemperatureUnit": {
+      "text2": ["Temperatuur", "eenheid"],
+      "desc": "Temperatuureenheid (C=Celsius | F=Fahrenheit)"
+    },
+    "AdvancedIdle": {
+      "text2": ["Gedetailleerd", "startscherm"],
+      "desc": "Gedetailleerde informatie weergeven in een kleiner lettertype op het startscherm."
+    },
+    "DisplayRotation": {
+      "text2": ["Scherm-", "oriëntatie"],
+      "desc": "Schermoriëntatie (R=Rechtshandig | L=Linkshandig | A=Automatisch)"
+    },
+    "BoostTemperature": {
+      "text2": ["Boost", "temp"],
+      "desc": "Temperatuur in boostmode"
+    },
+    "AutoStart": {
+      "text2": ["Auto", "start"],
+      "desc": "Breng de soldeerbout direct op temperatuur bij het opstarten. (F=Uit | T=Soldeertemperatuur | S=Slaapstand-temperatuur | K=Slaapstand kamertemperatuur)"
+    },
+    "CooldownBlink": {
+      "text2": ["Afkoel", "flikker"],
+      "desc": "Temperatuur laten flikkeren in het hoofdmenu als de soldeerpunt aan het afkoelen is."
+    },
+    "TemperatureCalibration": {
+      "text2": ["Calibreer", "temperatuur?"],
+      "desc": "Temperatuursafwijking van de soldeerpunt calibreren."
+    },
+    "SettingsReset": {
+      "text2": ["Instellingen", "resetten?"],
+      "desc": "Alle instellingen terugzetten."
+    },
+    "VoltageCalibration": {
+      "text2": ["Calibreer", "input-voltage?"],
+      "desc": "VIN Calibreren. (druk lang om te sluiten)."
+    },
+    "AdvancedSoldering": {
+      "text2": ["Gedetailleerd", "soldeerscherm"],
+      "desc": "Gedetailleerde informatie weergeven in een kleiner lettertype op het soldeerscherm."
+    },
+    "ScrollingSpeed": {
+      "text2": ["Scroll", "snelheid"],
+      "desc": "Snelheid waarmee de tekst scrolt."
+    },
+    "QCMaxVoltage": {
+      "text2": ["Power", "Wattage"],
+      "desc": "Wattage van de gebruikte voeding"
+    },
+    "PDNegTimeout": {
+      "text2": ["PD", "timeout"],
+      "desc": "PD negotiation timeout in 100ms steps for compatibility with some QC chargers (0: disabled)"
+    },
+    "PowerLimit": {
+      "text2": ["Vermogen", "limiet"],
+      "desc": "Maximaal vermogen (Watts)"
+    },
+    "ReverseButtonTempChange": {
+      "text2": ["Draai", "+ - knoppen om"],
+      "desc": "Keer de +- knoppen om de termperatuur van de punt te regelen om."
+    },
+    "TempChangeShortStep": {
+      "text2": ["Temp veranderen", "kort"],
+      "desc": "Temperatuur verandering bij kort drukken"
+    },
+    "TempChangeLongStep": {
+      "text2": ["Temp veranderen", "lang"],
+      "desc": "Temperatuur verandering bij lang drukken"
+    },
+    "PowerPulsePower": {
+      "text2": ["Vermogen", "Puls W"],
+      "desc": "Vermogen van puls om soldeerbout aan te houden"
+    },
+    "HallEffSensitivity": {
+      "text2": ["Hall sensor", "sensitivity"],
+      "desc": "Sensitivity of the Hall effect sensor to detect sleep (0=uit | 1=minst gevoelig | ... | 9=meest gevoelig)"
+    },
+    "LockingMode": {
+      "text2": ["Blokkeer", "knoppen"],
+      "desc": "Tijdens solderen lang op beide knoppen drukken, blokkeert ze. (U=Uit | B=Alleen boost | V=Volledig blokkeren)"
+    },
+    "MinVolCell": {
+      "text2": ["Minimum", "voltage"],
+      "desc": "Minimum allowed voltage per cell (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)"
+    },
+    "AnimLoop": {
+      "text2": ["Anim.", "loop"],
+      "desc": "Loop icon animations in main menu"
+    },
+    "AnimSpeed": {
+      "text2": ["Anim.", "speed"],
+      "desc": "Pace of icon animations in menu (O=off | S=slow | M=medium | F=fast)"
+    },
+    "PowerPulseWait": {
+      "text2": ["Power pulse", "delay"],
+      "desc": "Delay before keep-awake-pulse is triggered (x 2.5s)"
+    },
+    "PowerPulseDuration": {
+      "text2": ["Power pulse", "duration"],
+      "desc": "Keep-awake-pulse duration (x 250ms)"
+    },
+    "LanguageSwitch": {
+      "text2": ["Spraak :", " NL  Nederlands"],
+      "desc": ""
+    },
+    "Brightness": {
+      "text2": ["Screen", "brightness"],
+      "desc": "Adjust the brightness of the OLED screen"
+    },
+    "ColourInversion": {
+      "text2": ["Invert", "screen"],
+      "desc": "Invert the colours of the OLED screen"
+    },
+    "LOGOTime": {
+      "text2": ["Boot logo", "duration"],
+      "desc": "Sets the duration for the boot logo (s=seconds)"
+    }
+  }
+}

Translations/translation_NL_BE.json

@@ -0,0 +1,207 @@
+{
+  "languageCode": "NL_BE",
+  "languageLocalName": "Vlaams",
+  "fonts": ["ascii_basic", "latin_extended"],
+  "tempUnitFahrenheit": false,
+  "messages": {
+    "SettingsCalibrationWarning": "Zorg vooraf dat de punt op kamertemperatuur is!",
+    "SettingsResetWarning": "Ben je zeker dat je alle standaardwaarden wil resetten?",
+    "UVLOWarningString": "Voedingsspanning LAAG",
+    "UndervoltageString": "Onderspanning",
+    "InputVoltageString": "Voedingsspanning: ",
+    "SleepingSimpleString": "Zzz ",
+    "SleepingAdvancedString": "Slaapstand...",
+    "SleepingTipAdvancedString": "Punt:",
+    "OffString": "Uit"
+  },
+  "messagesWarn": {
+    "ResetOKMessage": "Reset OK",
+    "SettingsResetMessage": ["Settings were", "reset!"],
+    "NoAccelerometerMessage": ["No accelerometer", "detected!"],
+    "NoPowerDeliveryMessage": ["No USB-PD IC", "detected!"],
+    "LockingKeysString": "LOCKED",
+    "UnlockingKeysString": "UNLOCKED",
+    "WarningKeysLockedString": "!LOCKED!",
+    "WarningThermalRunaway": ["Thermal", "Runaway"]
+  },
+  "characters": {
+    "SettingRightChar": "R",
+    "SettingLeftChar": "L",
+    "SettingAutoChar": "A",
+    "SettingOffChar": "O",
+    "SettingSlowChar": "T",
+    "SettingMediumChar": "M",
+    "SettingFastChar": "S",
+    "SettingStartNoneChar": "F",
+    "SettingStartSolderingChar": "T",
+    "SettingStartSleepChar": "S",
+    "SettingStartSleepOffChar": "K",
+    "SettingSensitivityOff": "O",
+    "SettingSensitivityLow": "L",
+    "SettingSensitivityMedium": "M",
+    "SettingSensitivityHigh": "H",
+    "SettingLockDisableChar": "D",
+    "SettingLockBoostChar": "B",
+    "SettingLockFullChar": "F"
+  },
+  "menuGroups": {
+    "PowerMenu": {
+      "text2": ["Power", "settings"],
+      "desc": "Power settings"
+    },
+    "SolderingMenu": {
+      "text2": ["Soldeer", "Instellingen"],
+      "desc": "Soldeerinstellingen"
+    },
+    "PowerSavingMenu": {
+      "text2": ["Slaap", "standen"],
+      "desc": "Batterijspaarstanden"
+    },
+    "UIMenu": {
+      "text2": ["Gebruikers-", "Interface"],
+      "desc": "Gebruikersinterface Instellingen"
+    },
+    "AdvancedMenu": {
+      "text2": ["Gevorderde", "Instellingen"],
+      "desc": "Gevorderde Instellingen"
+    }
+  },
+  "menuOptions": {
+    "DCInCutoff": {
+      "text2": ["Spannings-", "bron"],
+      "desc": "Spanningsbron. Stelt minimumspanning in. (DC 10V) (S 3.3V per cel)"
+    },
+    "SleepTemperature": {
+      "text2": ["Slaap", "temp"],
+      "desc": "Temperatuur in slaapstand (°C)"
+    },
+    "SleepTimeout": {
+      "text2": ["Slaap", "time-out"],
+      "desc": "Slaapstand time-out (Minuten | Seconden)"
+    },
+    "ShutdownTimeout": {
+      "text2": ["Uitschakel", "time-out"],
+      "desc": "Automatisch afsluiten time-out (Minuten)"
+    },
+    "MotionSensitivity": {
+      "text2": ["Bewegings-", "gevoeligheid"],
+      "desc": "Bewegingsgevoeligheid (0=uit | 1=minst gevoelig | ... | 9=meest gevoelig)"
+    },
+    "TemperatureUnit": {
+      "text2": ["Temperatuur", "schaal"],
+      "desc": "Temperatuurschaal (°C=Celsius | °F=Fahrenheit)"
+    },
+    "AdvancedIdle": {
+      "text2": ["Gedetailleerd", "slaapscherm"],
+      "desc": "Gedetailleerde informatie in een kleiner lettertype in het slaapscherm."
+    },
+    "DisplayRotation": {
+      "text2": ["Scherm-", "oriëntatie"],
+      "desc": "Schermoriëntatie (R=Rechtshandig | L=Linkshandig | A=Automatisch)"
+    },
+    "BoostTemperature": {
+      "text2": ["Verhogings", "temp"],
+      "desc": "Verhogingstemperatuur"
+    },
+    "AutoStart": {
+      "text2": ["Auto", "start"],
+      "desc": "Breng de soldeerbout op temperatuur bij het opstarten. (F=Uit | T=Soldeertemperatuur | S=Slaapstand-temperatuur | K=Slaapstand kamertemperatuur)"
+    },
+    "CooldownBlink": {
+      "text2": ["Afkoel", "knipper"],
+      "desc": "Temperatuur knippert in hoofdmenu tijdens afkoeling."
+    },
+    "TemperatureCalibration": {
+      "text2": ["Calibreer", "temperatuur?"],
+      "desc": "Temperatuur van de punt calibreren."
+    },
+    "SettingsReset": {
+      "text2": ["Instellingen", "resetten?"],
+      "desc": "Alle instellingen resetten."
+    },
+    "VoltageCalibration": {
+      "text2": ["Calibreer", "voedingsspanning?"],
+      "desc": "VIN Calibreren. Bevestigen door knoppen lang in te drukken."
+    },
+    "AdvancedSoldering": {
+      "text2": ["Gedetailleerd", "soldeerscherm"],
+      "desc": "Gedetailleerde informatie in kleiner lettertype in soldeerscherm."
+    },
+    "ScrollingSpeed": {
+      "text2": ["Scrol", "snelheid"],
+      "desc": "Scrolsnelheid van de tekst."
+    },
+    "QCMaxVoltage": {
+      "text2": ["Vermogen", "Watt"],
+      "desc": "Vermogen van de adapter"
+    },
+    "PDNegTimeout": {
+      "text2": ["PD", "timeout"],
+      "desc": "PD negotiation timeout in 100ms steps for compatibility with some QC chargers"
+    },
+    "PowerLimit": {
+      "text2": ["Power", "limit"],
+      "desc": "Maximum power the iron can use (W=watt)"
+    },
+    "ReverseButtonTempChange": {
+      "text2": ["Swap", "+ - keys"],
+      "desc": "Reverse assignment of buttons for temperature adjustment"
+    },
+    "TempChangeShortStep": {
+      "text2": ["Temp change", "short"],
+      "desc": "Temperature-change-increment on short button press"
+    },
+    "TempChangeLongStep": {
+      "text2": ["Temp change", "long"],
+      "desc": "Temperature-change-increment on long button press"
+    },
+    "PowerPulsePower": {
+      "text2": ["Power", "pulse"],
+      "desc": "Intensity of power of keep-awake-pulse (watt)"
+    },
+    "HallEffSensitivity": {
+      "text2": ["Hall sensor", "sensitivity"],
+      "desc": "Sensitivity of the Hall effect sensor to detect sleep (0=uit | 1=minst gevoelig | ... | 9=meest gevoelig)"
+    },
+    "LockingMode": {
+      "text2": ["Allow locking", "buttons"],
+      "desc": "While soldering, hold down both buttons to toggle locking them (D=disable | B=boost mode only | F=full locking)"
+    },
+    "MinVolCell": {
+      "text2": ["Minimum", "voltage"],
+      "desc": "Minimum allowed voltage per cell (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)"
+    },
+    "AnimLoop": {
+      "text2": ["Anim.", "loop"],
+      "desc": "Loop icon animations in main menu"
+    },
+    "AnimSpeed": {
+      "text2": ["Anim.", "speed"],
+      "desc": "Pace of icon animations in menu (O=off | T=slow | M=medium | S=fast)"
+    },
+    "PowerPulseWait": {
+      "text2": ["Power pulse", "delay"],
+      "desc": "Delay before keep-awake-pulse is triggered (x 2.5s)"
+    },
+    "PowerPulseDuration": {
+      "text2": ["Power pulse", "duration"],
+      "desc": "Keep-awake-pulse duration (x 250ms)"
+    },
+    "LanguageSwitch": {
+      "text2": ["Spraak:", " NL_BE   Vlaams"],
+      "desc": ""
+    },
+    "Brightness": {
+      "text2": ["Screen", "brightness"],
+      "desc": "Adjust the brightness of the OLED screen"
+    },
+    "ColourInversion": {
+      "text2": ["Invert", "screen"],
+      "desc": "Invert the colours of the OLED screen"
+    },
+    "LOGOTime": {
+      "text2": ["Boot logo", "duration"],
+      "desc": "Sets the duration for the boot logo (s=seconds)"
+    }
+  }
+}