Pinecil v2 tune via PID (#1827)

* Start PWM after adc irq fully done

* Filter len 4

* Use comparitor 2 on timer for wrap around

* Update IRQ.cpp

* Tip measurements are uint16_t

Update BSP.cpp

Update BSP.cpp

* WiP PID

move pid tuning to config

Update PIDThread.cpp

* Handle PWM Timer gitchy comparitor

* Tuning

* Dampen with Kd

* Cleaning up

* Use TemperatureType_t for getTipTemp()

* Add small rolling average to user GUI temp to reduce flicker

* Trigger PID when adc is skipped (will use old values)

.flake8

@@ -0,0 +1,3 @@
+[flake8]
+ignore = E203, E266, E501, W503, F403, F401
+max-line-length = 200

.github/ISSUE_TEMPLATE/bug_report.md

@@ -0,0 +1,32 @@
+---
+name: Bug report
+about: Create a report to help us improve
+title: ''
+labels: ''
+assignees: Ralim
+
+---
+
+**Describe the bug**
+<!-- A clear and concise description of what the bug is. -->
+
+**To Reproduce**
+<!-- Steps to reproduce the behavior:
+1. Go to '...'
+2. Click on '...'
+3. Scroll down to '...'
+4. See error -->
+
+**Expected behavior**
+<!-- A clear and concise description of what you expected to happen. -->
+
+
+**Details of your device:**
+ <!-- You can get these from the debug menu by holding the rear button down and then using the front one to cycle through -->
+ - Device: [e.g. TS80/Pinecil etc]
+ - Release: [eg 2.15.40087E6]
+ - Power adapter being used:
+ - If this is an accelerometer related issue, please include its model number here:
+
+**Additional context**
+<!-- Add any other context about the problem here. -->

.github/ISSUE_TEMPLATE/everything-else--questions--notes-etc-.md

@@ -0,0 +1,10 @@
+---
+name: Everything else (Questions, notes etc)
+about: For remarking questions or notes
+title: ''
+labels: ''
+assignees: ''
+
+---
+
+<!-- **Questions are preferred to be kept to the discussions tab where possible, but otherwise go for it. be polite and as clear as possible.** -->

.github/ISSUE_TEMPLATE/feature_request.md

@@ -0,0 +1,20 @@
+---
+name: Feature request
+about: Suggest an idea for this project
+title: ''
+labels: enhancement
+assignees: Ralim
+
+---
+
+**Is your feature request related to a problem? Please describe.**
+<!-- A clear and concise description of what the problem is. Ex. I'm always frustrated when [...] -->
+
+**Describe the solution you'd like**
+<!-- A clear and concise description of what you want to happen. -->
+
+**Describe alternatives you've considered**
+<!-- A clear and concise description of any alternative solutions or features you've considered. -->
+
+**Additional context**
+<!-- Add any other context or screenshots about the feature request here. -->

.github/dependabot.yml

@@ -0,0 +1,11 @@
+version: 2
+updates:
+  - package-ecosystem: "github-actions"
+    directory: "/"
+    schedule:
+      # Check for updates to GitHub Actions every weekday
+      interval: "weekly"
+    open-pull-requests-limit: 10
+    commit-message:
+      prefix: chore
+      include: scope

.github/pull_request_template.md

@@ -1,17 +1,17 @@
 
-Please try and fill out this template where possible, not all fields are required and can be removed.
+<!-- Please try and fill out this template where possible, not all fields are required and can be removed. -->
 
 * **Please check if the PR fulfills these requirements**
 - [] The changes have been tested locally
 - [] There are no breaking changes
 
 * **What kind of change does this PR introduce?**
-(Bug fix, feature, docs update, ...)
+<!-- (Bug fix, feature, docs update, ...) -->
 
 
 
 * **What is the current behavior?**
-(You can also link to an open issue here)
+<!-- (You can also just link to an open issue here) -->
 
 * **What is the new behavior (if this is a feature change)?**
 

.github/security.md

@@ -0,0 +1,18 @@
+# Security Policy
+
+## Supported Versions
+
+Use this section to tell people about which versions of your project are
+currently being supported with security updates.
+
+| Version | Supported          |
+| ------- | ------------------ |
+| Latest Release   | :white_check_mark: |
+| master   | :white_check_mark:                |
+
+## Reporting a Vulnerability
+
+1. Report in an issue please and tag @ralim
+2. All issues are read within 1 working week in general; often within 24 hours
+3. Issue shall recieve a comment within 14 days; but goal is < 2.
+4. Issue will be open until the vulnerability is closed in all supported versions

.github/workflows/ccpp.yml

@@ -1,77 +0,0 @@
-name: C/C++ CI
-
-on: [pull_request, push]
-
-jobs:
-  build_TS80:
-
-    runs-on: ubuntu-latest
-    
-    steps:
-    - uses: actions/checkout@v2
-
-    - name: chmod
-      run: chmod +x setup.sh && chmod +x workspace/TS100/build.sh
-
-    - name: setup
-      run: ./setup.sh
-
-    - name: build TS80
-      run: cd workspace/TS100 && ./build.sh -m TS80
-
-    - name: Archive TS80 artifacts
-      uses: actions/upload-artifact@v2
-      with:
-        name: TS80
-        path: |
-          workspace/TS100/Hexfile/TS80_*.hex
-          workspace/TS100/Hexfile/TS80_*.bin
-        if-no-files-found: error
-  build_TS80P:
-
-    runs-on: ubuntu-latest
-    
-    steps:
-    - uses: actions/checkout@v2
-
-    - name: chmod
-      run: chmod +x setup.sh && chmod +x workspace/TS100/build.sh
-
-    - name: setup
-      run: ./setup.sh
-
-    - name: build TS80P
-      run: cd workspace/TS100 && ./build.sh -m TS80P
-
-    - name: Archive TS80P artifacts
-      uses: actions/upload-artifact@v2
-      with:
-        name: TS80P
-        path: |
-          workspace/TS100/Hexfile/TS80P_*.hex
-          workspace/TS100/Hexfile/TS80P_*.bin
-        if-no-files-found: error
-  build_TS100:
-
-    runs-on: ubuntu-latest
-    
-    steps:
-    - uses: actions/checkout@v2
-
-    - name: chmod
-      run: chmod +x setup.sh && chmod +x workspace/TS100/build.sh
-
-    - name: setup
-      run: ./setup.sh
-
-    - name: build TS100
-      run: cd workspace/TS100 && ./build.sh -m TS100
-
-    - name: Archive TS100 artifacts
-      uses: actions/upload-artifact@v2
-      with:
-        name: TS100
-        path: |
-          workspace/TS100/Hexfile/TS100_*.hex
-          workspace/TS100/Hexfile/TS100_*.bin
-        if-no-files-found: error

.github/workflows/docs.yml

@@ -0,0 +1,40 @@
+
+name: Docs
+
+# Controls when the workflow will run
+on:
+  # Triggers the workflow on push or pull request
+  push:
+    branches: [ dev, docs ]
+
+  # Allows you to run this workflow manually from the Actions tab
+  workflow_dispatch:
+
+
+# Allow one concurrent deployment
+concurrency:
+  group: "pages"
+  cancel-in-progress: true
+
+
+jobs:
+  deploy-docs:
+    # The type of runner that the job will run on
+    runs-on: ubuntu-latest
+
+    steps:
+      - uses: actions/checkout@v4
+        with:
+          fetch-depth: 0
+      - uses: actions/setup-python@v4
+
+
+      - run: |
+          pip install --upgrade pip &&
+          pip install mkdocs mkdocs-gen-files pymdown-extensions \
+              mkdocs-git-revision-date-plugin mkdocs-autolinks-plugin \
+              mkdocs-awesome-pages-plugin 
+      - run: git config user.name 'github-actions[bot]' && git config user.email 'github-actions[bot]@users.noreply.github.com'
+
+      - name: Publish docs
+        run: mkdocs gh-deploy -f scripts/IronOS-mkdocs.yml -d ../site

.github/workflows/push.yml

@@ -0,0 +1,206 @@
+name: CI
+
+on: [push, pull_request]
+
+jobs:
+
+
+  build:
+    runs-on: ubuntu-20.04
+    container:
+      image: alpine:3.16
+    strategy:
+      matrix:
+        model: ["TS100", "TS80", "TS80P", "Pinecil", "MHP30", "Pinecilv2", "S60", "TS101"]
+      fail-fast: true
+
+    steps:
+      - name: Install dependencies (apk)
+        run: apk add --no-cache gcc-riscv-none-elf gcc-arm-none-eabi newlib-riscv-none-elf newlib-arm-none-eabi findutils python3 py3-pip make git bash
+
+      - name: Install dependencies (python)
+        run: python3 -m pip install bdflib
+
+      - uses: actions/checkout@v4
+        with:
+          submodules: true
+
+      - name: Git ownership exception
+        run: git config --global --add safe.directory /__w/IronOS/IronOS && git config --global safe.directory "$GITHUB_WORKSPACE"
+
+      - name: Git meta info
+        run: echo "GITHUB_CI_PR_SHA=${{github.event.pull_request.head.sha}}" >> "${GITHUB_ENV}"
+
+      - name: Build ${{ matrix.model }}
+        run: cd source && ./build.sh -m ${{ matrix.model }}
+
+      - name: Copy license files
+        run: cp LICENSE scripts/LICENSE_RELEASE.md  source/Hexfile/
+
+      - name: Archive ${{ matrix.model }} artifacts
+        uses: actions/upload-artifact@v3
+        with:
+          name: ${{ matrix.model }}
+          path: |
+            source/Hexfile/${{ matrix.model }}_*.hex
+            source/Hexfile/${{ matrix.model }}_*.dfu
+            source/Hexfile/${{ matrix.model }}_*.bin
+            source/Hexfile/LICENSE
+            source/Hexfile/LICENSE_RELEASE.md
+          if-no-files-found: error
+
+      - name: Generate json index file
+        run: ./source/metadata.py ${{ matrix.model }}.json
+
+      - name: Archive ${{ matrix.model }} index file
+        uses: actions/upload-artifact@v3
+        with:
+          name: metadata
+          path: source/Hexfile/${{ matrix.model }}.json
+
+
+  build_multi-lang:
+    runs-on: ubuntu-20.04
+    container:
+      image: alpine:3.16
+    strategy:
+      matrix:
+        model: ["Pinecil", "Pinecilv2"]
+      fail-fast: true
+
+    steps:
+      - name: Install dependencies (apk)
+        run: apk add --no-cache gcc-riscv-none-elf newlib-riscv-none-elf findutils python3 py3-pip make git bash musl-dev
+      - name: Install dependencies (python)
+        run: python3 -m pip install bdflib
+
+      - uses: actions/checkout@v4
+        with:
+          submodules: true
+
+      - name: Git ownership exception
+        run: git config --global --add safe.directory /__w/IronOS/IronOS && git config --global safe.directory "$GITHUB_WORKSPACE"
+
+      - name: Git meta info
+        run: echo "GITHUB_CI_PR_SHA=${{github.event.pull_request.head.sha}}" >> "${GITHUB_ENV}"
+
+      - name: Build ${{ matrix.model }}
+        run: make -C source/ -j$(nproc) model="${{ matrix.model }}" firmware-multi_compressed_European firmware-multi_compressed_Bulgarian+Russian+Serbian+Ukrainian firmware-multi_Chinese+Japanese
+
+      - name: Copy license files
+        run: cp LICENSE scripts/LICENSE_RELEASE.md  source/Hexfile/
+
+      - name: Archive ${{ matrix.model }} artifacts
+        uses: actions/upload-artifact@v3
+        with:
+          name: ${{ matrix.model }}_multi-lang
+          path: |
+            source/Hexfile/${{ matrix.model }}_*.hex
+            source/Hexfile/${{ matrix.model }}_*.dfu
+            source/Hexfile/${{ matrix.model }}_*.bin
+            source/Hexfile/LICENSE
+            source/Hexfile/LICENSE_RELEASE.md
+          if-no-files-found: error
+
+      - name: Generate json index file
+        run: ./source/metadata.py ${{ matrix.model }}_multi-lang.json
+
+      - name: Archive ${{ matrix.model }} index file
+        uses: actions/upload-artifact@v3
+        with:
+          name: metadata
+          path: source/Hexfile/${{ matrix.model }}_multi-lang.json
+
+
+  tests:
+    runs-on: ubuntu-20.04
+    container:
+      image: alpine:3.16
+
+    steps:
+      - name: Install dependencies (apk)
+        run: apk add --no-cache python3 py3-pip make git bash findutils gcc musl-dev
+
+      - uses: actions/checkout@v4
+        with:
+          submodules: true
+
+      - name: Install dependencies (python)
+        run: python3 -m pip install bdflib
+
+      - name: Run python tests
+        run: ./Translations/make_translation_test.py
+
+      - name: Run BriefLZ tests
+        run: make  -C source/  Objects/host/brieflz/libbrieflz.so && ./Translations/brieflz_test.py
+
+
+  check_c-cpp:
+    runs-on: ubuntu-20.04
+    container:
+      image: alpine:3.16
+
+    steps:
+      - name: Install dependencies (apk)
+        run: apk add --no-cache make git diffutils findutils clang-extra-tools bash
+
+      - uses: actions/checkout@v4
+        with:
+          submodules: true
+
+      - name: Check format style with clang-format
+        run: make  clean  check-style
+
+
+  check_python:
+    runs-on: ubuntu-20.04
+    container:
+      image: alpine:3.16
+
+    steps:
+      - name: Install dependencies (apk)
+        run: apk add --no-cache python3 py3-pip make git black
+
+      - uses: actions/checkout@v4
+        with:
+          submodules: true
+
+      - name: Install dependencies (python)
+        run: python3 -m pip install bdflib flake8
+
+      - name: Check python formatting with black
+        run: black --check Translations
+
+      - name: Check python with flake8
+        run: flake8 Translations
+
+
+  check_shell:
+    name: check_shell
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@v4
+      - name: shellcheck
+        uses: reviewdog/action-shellcheck@v1
+        with:
+          github_token: ${{ secrets.github_token }}
+          reporter: github-pr-review # Change reporter.
+          exclude: "./.git/*" # Optional.
+          check_all_files_with_shebangs: "false" # Optional.
+
+
+  check_readme:
+    runs-on: ubuntu-20.04
+    container:
+      image: alpine:3.16
+
+    steps:
+      - name: Install dependencies (apk)
+        run: apk add --no-cache git
+
+      - uses: actions/checkout@v4
+        with:
+          submodules: true
+
+      - name: Check autogenerated Documentation/README.md
+        run: /bin/sh ./scripts/deploy.sh docs_readme

.gitignore

@@ -1,3 +1,5 @@
+#### Generic ####
+
 # Object files
 *.o
 *.ko
@@ -5,6 +7,7 @@
 *.elf
 *.d
 *.DS_Store
+
 # Precompiled Headers
 *.gch
 *.pch
@@ -27,52 +30,26 @@
 *.app
 *.i*86
 *.x86_64
-workspace/*.hex
 
 # Debug files
 *.dSYM/
 *.su
-workspace/ts100/Debug/*
-workspace/.metadata/*
 
-workspace/ts100/.settings/language.settings.xml
-workspace/ts100/.cproject
-TS100/KiCad/TS100.bak
-Logo GUI/TS100 Logo Editor/TS100 Logo Editor/obj/
-Logo GUI/TS100 Logo Editor/TS100 Logo Editor/bin/
-workspace/ts100/ts100.xml
-workspace/ts100_old/*
-*.cache
-workspace/TS100/.settings/language.settings.xml
-workspace/TS100A/Release/TS100A.map
-workspace/TS100A/Release/TS100A.list
-workspace/TS100A/Release/TS100A.hex
-workspace/TS100A/.settings/language.settings.xml
-workspace/TS100A/.metadata/
-Translation Editor/.vscode/
-Translation Editor/__pycache__/
+# Custom scripts & misc. files
 *.pyc
-workspace/TS100/src/Translation.cpp
 *.lst
 *.mk
 *.list
-workspace/TS100/Release/
-workspace/TS100/Hexfile/
-workspace/RemoteSystemsTempFiles/
-workspace/TS100/.settings/
-workspace/TS100/TS80/
-ci/artefacts/
-ci/secrets/unencrypted/
-codeship.aes
-.vscode/settings.json
 
 # Auto generated files
-workspace/TS100/Core/Src/Translation.cpp
-workspace/TS100/Core/Inc/unit.h
+*.cache
+codeship.aes
+CoreCompileInputs.cache
+
 # IDE configs
 .vs/*
 .settings/*
-..cproject.swp
+.cproject.swp
 
 # Visual Studios
 .vscode/*
@@ -80,6 +57,7 @@ workspace/TS100/Core/Inc/unit.h
 !.vscode/tasks.json
 !.vscode/launch.json
 !.vscode/extensions.json
+.vscode/settings.json
 
 # Eclipse
 .metadata
@@ -135,11 +113,24 @@ local.properties
 .scala_dependencies
 .worksheet
 
-# Jetbrains
-# Covers JetBrains IDEs: IntelliJ, RubyMine, PhpStorm, AppCode, PyCharm, CLion, Android Studio and WebStorm
+# source code tagging systems (GNU Global, ctags, cscope)
+GPATH
+GRTAGS
+GTAGS
+*tags
+*tags/
+.*tags
+.*tags/
+cscope.*
+cscope/
+.cscope/
+
+
+#### Jetbrains: IntelliJ, RubyMine, PhpStorm, AppCode, PyCharm, CLion, Android Studio and WebStorm ####
 # Reference: https://intellij-support.jetbrains.com/hc/en-us/articles/206544839
 
 # User-specific stuff
+.idea/
 .idea/**/workspace.xml
 .idea/**/tasks.xml
 .idea/**/usage.statistics.xml
@@ -189,5 +180,38 @@ fabric.properties
 # Editor-based Rest Client
 .idea/httpRequests
 
-CoreCompileInputs.cache
-.vscode/settings.json
+
+#### IronOS project specific files ####
+
+# Binaries
+source/Hexfile/
+source/Objects/
+BUILDS/
+
+# Autogenerated
+source/Core/Gen/
+source/Core/Inc/unit.h
+
+# Deploy
+scripts/ci/artefacts/
+scripts/ci/secrets/unencrypted/
+
+# Generated static local docs
+site/
+
+# Translations
+Translations/__pycache__/
+Translation Editor/__pycache__/
+Translation Editor/.vscode/
+
+# misc.
+source/compile_commands.json
+source/.metadata/*
+
+# TS100 related
+TS100/KiCad/TS100.bak
+Logo GUI/TS100 Logo Editor/TS100 Logo Editor/obj/
+Logo GUI/TS100 Logo Editor/TS100 Logo Editor/bin/
+
+# Tests/linters/sanitizers
+source/check-style.log

.gitmodules

@@ -0,0 +1,3 @@
+[submodule "source/Core/Drivers/usb-pd"]
+	path = source/Core/Drivers/usb-pd
+	url = https://github.com/Ralim/usb-pd.git

Bootup Logo/Logo GUI/TS100 Logo Editor/TS100 Logo Editor.sln

@@ -1,22 +0,0 @@
-
-Microsoft Visual Studio Solution File, Format Version 12.00
-# Visual Studio 15
-VisualStudioVersion = 15.0.26430.15
-MinimumVisualStudioVersion = 10.0.40219.1
-Project("{FAE04EC0-301F-11D3-BF4B-00C04F79EFBC}") = "TS100 Logo Editor", "TS100 Logo Editor\TS100 Logo Editor.csproj", "{206C8AEF-3BE6-44E9-A1B0-25BF3805F1CB}"
-EndProject
-Global
-	GlobalSection(SolutionConfigurationPlatforms) = preSolution
-		Debug|Any CPU = Debug|Any CPU
-		Release|Any CPU = Release|Any CPU
-	EndGlobalSection
-	GlobalSection(ProjectConfigurationPlatforms) = postSolution
-		{206C8AEF-3BE6-44E9-A1B0-25BF3805F1CB}.Debug|Any CPU.ActiveCfg = Debug|Any CPU
-		{206C8AEF-3BE6-44E9-A1B0-25BF3805F1CB}.Debug|Any CPU.Build.0 = Debug|Any CPU
-		{206C8AEF-3BE6-44E9-A1B0-25BF3805F1CB}.Release|Any CPU.ActiveCfg = Release|Any CPU
-		{206C8AEF-3BE6-44E9-A1B0-25BF3805F1CB}.Release|Any CPU.Build.0 = Release|Any CPU
-	EndGlobalSection
-	GlobalSection(SolutionProperties) = preSolution
-		HideSolutionNode = FALSE
-	EndGlobalSection
-EndGlobal

Bootup Logo/Logo GUI/TS100 Logo Editor/TS100 Logo Editor.userprefs

@@ -1,8 +0,0 @@
-<Properties StartupItem="TS100 Logo Editor/TS100 Logo Editor.csproj">
-  <MonoDevelop.Ide.Workspace ActiveConfiguration="Debug" />
-  <MonoDevelop.Ide.Workbench />
-  <MonoDevelop.Ide.DebuggingService.Breakpoints>
-    <BreakpointStore />
-  </MonoDevelop.Ide.DebuggingService.Breakpoints>
-  <MonoDevelop.Ide.DebuggingService.PinnedWatches />
-</Properties>

Bootup Logo/Logo GUI/TS100 Logo Editor/TS100 Logo Editor/App.config

@@ -1,6 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<configuration>
-    <startup> 
-        <supportedRuntime version="v4.0" sku=".NETFramework,Version=v4.0"/>
-    </startup>
-</configuration>

Bootup Logo/Logo GUI/TS100 Logo Editor/TS100 Logo Editor/Form1.Designer.cs

@@ -1,209 +0,0 @@
-namespace TS100_Logo_Editor
-{
-    partial class Form1
-    {
-        /// <summary>
-        /// Required designer variable.
-        /// </summary>
-        private System.ComponentModel.IContainer components = null;
-
-        /// <summary>
-        /// Clean up any resources being used.
-        /// </summary>
-        /// <param name="disposing">true if managed resources should be disposed; otherwise, false.</param>
-        protected override void Dispose(bool disposing)
-        {
-            if (disposing && (components != null))
-            {
-                components.Dispose();
-            }
-            base.Dispose(disposing);
-        }
-
-        #region Windows Form Designer generated code
-
-        /// <summary>
-        /// Required method for Designer support - do not modify
-        /// the contents of this method with the code editor.
-        /// </summary>
-        private void InitializeComponent()
-        {
-            this.groupBox1 = new System.Windows.Forms.GroupBox();
-            this.btnLoadImage = new System.Windows.Forms.Button();
-            this.groupBox2 = new System.Windows.Forms.GroupBox();
-            this.cbInvertImage = new System.Windows.Forms.CheckBox();
-            this.gbScaling = new System.Windows.Forms.GroupBox();
-            this.rbScaleStretch = new System.Windows.Forms.RadioButton();
-            this.rbScaleFit = new System.Windows.Forms.RadioButton();
-            this.pbImage = new System.Windows.Forms.PictureBox();
-            this.groupBox3 = new System.Windows.Forms.GroupBox();
-            this.btnSaveHex = new System.Windows.Forms.Button();
-            this.groupBox1.SuspendLayout();
-            this.groupBox2.SuspendLayout();
-            this.gbScaling.SuspendLayout();
-            ((System.ComponentModel.ISupportInitialize)(this.pbImage)).BeginInit();
-            this.groupBox3.SuspendLayout();
-            this.SuspendLayout();
-            // 
-            // groupBox1
-            // 
-            this.groupBox1.Controls.Add(this.btnLoadImage);
-            this.groupBox1.Location = new System.Drawing.Point(20, 20);
-            this.groupBox1.Margin = new System.Windows.Forms.Padding(4, 5, 4, 5);
-            this.groupBox1.Name = "groupBox1";
-            this.groupBox1.Padding = new System.Windows.Forms.Padding(4, 5, 4, 5);
-            this.groupBox1.Size = new System.Drawing.Size(300, 217);
-            this.groupBox1.TabIndex = 0;
-            this.groupBox1.TabStop = false;
-            this.groupBox1.Text = "1. Load source Image";
-            // 
-            // btnLoadImage
-            // 
-            this.btnLoadImage.Location = new System.Drawing.Point(10, 31);
-            this.btnLoadImage.Margin = new System.Windows.Forms.Padding(4, 5, 4, 5);
-            this.btnLoadImage.Name = "btnLoadImage";
-            this.btnLoadImage.Size = new System.Drawing.Size(280, 35);
-            this.btnLoadImage.TabIndex = 0;
-            this.btnLoadImage.Text = "Load Image";
-            this.btnLoadImage.UseVisualStyleBackColor = true;
-            this.btnLoadImage.Click += new System.EventHandler(this.btnLoadImage_Click);
-            // 
-            // groupBox2
-            // 
-            this.groupBox2.Controls.Add(this.cbInvertImage);
-            this.groupBox2.Controls.Add(this.gbScaling);
-            this.groupBox2.Controls.Add(this.pbImage);
-            this.groupBox2.Location = new System.Drawing.Point(330, 20);
-            this.groupBox2.Margin = new System.Windows.Forms.Padding(4, 5, 4, 5);
-            this.groupBox2.Name = "groupBox2";
-            this.groupBox2.Padding = new System.Windows.Forms.Padding(4, 5, 4, 5);
-            this.groupBox2.Size = new System.Drawing.Size(300, 217);
-            this.groupBox2.TabIndex = 1;
-            this.groupBox2.TabStop = false;
-            this.groupBox2.Text = "2. Adjust image";
-            // 
-            // cbInvertImage
-            // 
-            this.cbInvertImage.AutoSize = true;
-            this.cbInvertImage.Location = new System.Drawing.Point(138, 122);
-            this.cbInvertImage.Margin = new System.Windows.Forms.Padding(4, 5, 4, 5);
-            this.cbInvertImage.Name = "cbInvertImage";
-            this.cbInvertImage.Size = new System.Drawing.Size(75, 24);
-            this.cbInvertImage.TabIndex = 2;
-            this.cbInvertImage.Text = "Invert";
-            this.cbInvertImage.UseVisualStyleBackColor = true;
-            this.cbInvertImage.CheckedChanged += new System.EventHandler(this.cbInvertImage_CheckedChanged);
-            // 
-            // gbScaling
-            // 
-            this.gbScaling.Controls.Add(this.rbScaleStretch);
-            this.gbScaling.Controls.Add(this.rbScaleFit);
-            this.gbScaling.Location = new System.Drawing.Point(9, 91);
-            this.gbScaling.Margin = new System.Windows.Forms.Padding(4, 5, 4, 5);
-            this.gbScaling.Name = "gbScaling";
-            this.gbScaling.Padding = new System.Windows.Forms.Padding(4, 5, 4, 5);
-            this.gbScaling.Size = new System.Drawing.Size(120, 117);
-            this.gbScaling.TabIndex = 1;
-            this.gbScaling.TabStop = false;
-            this.gbScaling.Text = "Scaling";
-            // 
-            // rbScaleStretch
-            // 
-            this.rbScaleStretch.AutoSize = true;
-            this.rbScaleStretch.Location = new System.Drawing.Point(10, 68);
-            this.rbScaleStretch.Margin = new System.Windows.Forms.Padding(4, 5, 4, 5);
-            this.rbScaleStretch.Name = "rbScaleStretch";
-            this.rbScaleStretch.Size = new System.Drawing.Size(86, 24);
-            this.rbScaleStretch.TabIndex = 1;
-            this.rbScaleStretch.Text = "Stretch";
-            this.rbScaleStretch.UseVisualStyleBackColor = true;
-            this.rbScaleStretch.CheckedChanged += new System.EventHandler(this.rbScaleStretch_CheckedChanged);
-            // 
-            // rbScaleFit
-            // 
-            this.rbScaleFit.AutoSize = true;
-            this.rbScaleFit.Checked = true;
-            this.rbScaleFit.Location = new System.Drawing.Point(10, 31);
-            this.rbScaleFit.Margin = new System.Windows.Forms.Padding(4, 5, 4, 5);
-            this.rbScaleFit.Name = "rbScaleFit";
-            this.rbScaleFit.Size = new System.Drawing.Size(52, 24);
-            this.rbScaleFit.TabIndex = 0;
-            this.rbScaleFit.TabStop = true;
-            this.rbScaleFit.Text = "Fit";
-            this.rbScaleFit.UseVisualStyleBackColor = true;
-            this.rbScaleFit.CheckedChanged += new System.EventHandler(this.rbScaleFit_CheckedChanged);
-            // 
-            // pbImage
-            // 
-            this.pbImage.BackColor = System.Drawing.Color.Black;
-            this.pbImage.Location = new System.Drawing.Point(4, 31);
-            this.pbImage.Margin = new System.Windows.Forms.Padding(4, 5, 4, 5);
-            this.pbImage.Name = "pbImage";
-            this.pbImage.Size = new System.Drawing.Size(192, 32);
-            this.pbImage.TabIndex = 0;
-            this.pbImage.TabStop = false;
-            // 
-            // groupBox3
-            // 
-            this.groupBox3.Controls.Add(this.btnSaveHex);
-            this.groupBox3.Location = new System.Drawing.Point(640, 20);
-            this.groupBox3.Margin = new System.Windows.Forms.Padding(4, 5, 4, 5);
-            this.groupBox3.Name = "groupBox3";
-            this.groupBox3.Padding = new System.Windows.Forms.Padding(4, 5, 4, 5);
-            this.groupBox3.Size = new System.Drawing.Size(300, 217);
-            this.groupBox3.TabIndex = 2;
-            this.groupBox3.TabStop = false;
-            this.groupBox3.Text = "3. Export";
-            // 
-            // btnSaveHex
-            // 
-            this.btnSaveHex.Location = new System.Drawing.Point(8, 91);
-            this.btnSaveHex.Margin = new System.Windows.Forms.Padding(4, 5, 4, 5);
-            this.btnSaveHex.Name = "btnSaveHex";
-            this.btnSaveHex.Size = new System.Drawing.Size(280, 35);
-            this.btnSaveHex.TabIndex = 0;
-            this.btnSaveHex.Text = "Save DFU File";
-            this.btnSaveHex.UseVisualStyleBackColor = true;
-            this.btnSaveHex.Click += new System.EventHandler(this.btnSaveHex_Click);
-            // 
-            // Form1
-            // 
-            this.AutoScaleDimensions = new System.Drawing.SizeF(9F, 20F);
-            this.AutoScaleMode = System.Windows.Forms.AutoScaleMode.Font;
-            this.ClientSize = new System.Drawing.Size(963, 265);
-            this.Controls.Add(this.groupBox3);
-            this.Controls.Add(this.groupBox2);
-            this.Controls.Add(this.groupBox1);
-            this.DoubleBuffered = true;
-            this.FormBorderStyle = System.Windows.Forms.FormBorderStyle.FixedDialog;
-            this.Margin = new System.Windows.Forms.Padding(4, 5, 4, 5);
-            this.Name = "Form1";
-            this.ShowIcon = false;
-            this.StartPosition = System.Windows.Forms.FormStartPosition.CenterScreen;
-            this.Text = "TS100 Custom Logo editor";
-            this.groupBox1.ResumeLayout(false);
-            this.groupBox2.ResumeLayout(false);
-            this.groupBox2.PerformLayout();
-            this.gbScaling.ResumeLayout(false);
-            this.gbScaling.PerformLayout();
-            ((System.ComponentModel.ISupportInitialize)(this.pbImage)).EndInit();
-            this.groupBox3.ResumeLayout(false);
-            this.ResumeLayout(false);
-
-        }
-
-        #endregion
-
-        private System.Windows.Forms.GroupBox groupBox1;
-        private System.Windows.Forms.Button btnLoadImage;
-        private System.Windows.Forms.GroupBox groupBox2;
-        private System.Windows.Forms.CheckBox cbInvertImage;
-        private System.Windows.Forms.GroupBox gbScaling;
-        private System.Windows.Forms.RadioButton rbScaleStretch;
-        private System.Windows.Forms.RadioButton rbScaleFit;
-        private System.Windows.Forms.PictureBox pbImage;
-        private System.Windows.Forms.GroupBox groupBox3;
-        private System.Windows.Forms.Button btnSaveHex;
-    }
-}
-

Bootup Logo/Logo GUI/TS100 Logo Editor/TS100 Logo Editor/Form1.cs

@@ -1,169 +0,0 @@
-
-using System;
-using System.Drawing;
-using System.Windows.Forms;
-
-namespace TS100_Logo_Editor
-{
-    public partial class Form1 : Form
-    {
-        public Form1()
-        {
-            InitializeComponent();
-        }
-        Image sourceImage;
-        const int LCDWidth = 96;
-        Bitmap PureBMP;
-        private void btnLoadImage_Click(object sender, EventArgs e)
-        {
-            //load in an image
-            OpenFileDialog dlg = new OpenFileDialog();
-            dlg.Title = "Select Image";
-            dlg.Filter = "Image files (*.jpg, *.jpeg, *.bmp, *.png) | *.jpg; *.jpeg; *.bmp; *.png";
-            if (dlg.ShowDialog() == DialogResult.OK)
-            {
-                //user has selected an image
-                string filename = dlg.FileName;
-                sourceImage = Image.FromFile(filename);
-                reDrawPreview();
-            }
-
-        }
-
-        private void reDrawPreview()
-        {
-            PureBMP = new Bitmap(LCDWidth, 16);
-            //scale mode
-            if (rbScaleFit.Checked)
-            {
-                //fit
-                float scalefactor = Math.Min((float)PureBMP.Width / (float)sourceImage.Width, (float)PureBMP.Height / (float)sourceImage.Height);
-                using (Graphics g = Graphics.FromImage(PureBMP))
-                {
-                    g.DrawImage(sourceImage, new RectangleF(0, 0, sourceImage.Width * scalefactor, sourceImage.Height * scalefactor));
-                }
-            }
-            else
-            {
-                //draw image stretched
-                using (Graphics g = Graphics.FromImage(PureBMP))
-                {
-                    g.DrawImage(sourceImage, new RectangleF(0, 0, LCDWidth, 16));
-                }
-            }
-            //We now have our downsampled colour image
-            //apply inversion
-            if (cbInvertImage.Checked)
-            {
-                for (int y = 0; (y <= (PureBMP.Height - 1)); y++)
-                {
-                    for (int x = 0; (x <= (PureBMP.Width - 1)); x++)
-                    {
-                        Color inv = PureBMP.GetPixel(x, y);
-                        inv = Color.FromArgb(255, (255 - inv.R), (255 - inv.G), (255 - inv.B));
-                        PureBMP.SetPixel(x, y, inv);
-                    }
-                }
-            }
-
-            //Threshold image
-            PureBMP = GrayScale(PureBMP);
-            //draw image at 2x scale
-            Bitmap bBig = new Bitmap(pbImage.Width, pbImage.Height);
-            using (Graphics g = Graphics.FromImage(bBig))
-            {
-                g.DrawImage(PureBMP, new RectangleF(0, 0, pbImage.Width, pbImage.Height));
-            }
-            pbImage.Image = bBig;
-        }
-        public Bitmap GrayScale(Bitmap Bmp)
-        {
-            int rgb;
-            Color c;
-
-            for (int y = 0; y < Bmp.Height; y++)
-                for (int x = 0; x < Bmp.Width; x++)
-                {
-                    c = Bmp.GetPixel(x, y);
-                    rgb = (int)((c.R + c.G + c.B) / 3);
-                    if (rgb > 128)
-                        rgb = 0xFF;
-                    else
-                        rgb = 0x00;
-                    Bmp.SetPixel(x, y, Color.FromArgb(rgb, rgb, rgb));
-                }
-            return Bmp;
-        }
-
-        private void rbScaleStretch_CheckedChanged(object sender, EventArgs e)
-        {
-            reDrawPreview();
-        }
-
-        private void rbScaleFit_CheckedChanged(object sender, EventArgs e)
-        {
-            reDrawPreview();
-        }
-
-        private void cbInvertImage_CheckedChanged(object sender, EventArgs e)
-        {
-            reDrawPreview();
-        }
-
-        private void btnSaveHex_Click(object sender, EventArgs e)
-        {
-            Bitmap bmp = PureBMP;
-            //convert image to byte array
-            byte[] data = new byte[1024];
-            data[0] = 0xAA;
-            data[1] = 0x55;
-            data[2] = 0xF0;
-            data[3] = 0x0D;
-
-            for (int i = 0; i < (LCDWidth * 16 / 8); i++)
-            {
-                //loop through all the bytes
-                byte b = 0;//local byte
-                //i sets the starting column
-                for (int y = 0; y < 8; y++)
-                {
-                    var px = bmp.GetPixel(i % LCDWidth, (i / LCDWidth) == 1 ? 8 + y : y);
-                    //we loop down the picture
-                    //LSB is the top, MSB is the bottom
-                    if (px.R >= 128)
-                    {
-                        //pixel is white
-                        b |= (byte)(1 << y);
-                    }
-                }
-                data[i + 4] = b;
-            }
-            //We should now have the byte array that represents the image in the LCD format.
-            //We now send this off to be encoded by the Intel Encoder
-            //Flip all uint16_t pairs
-            for (int i = 0; i < data.Length; i += 2)
-            {
-                //we need to swap each pair
-                byte temp = data[i];
-                data[i] = data[i + 1];
-                data[i + 1] = temp;
-            }
-            string outputHexFile = IntelHex.IntelHex.encode(data, 0x0800F800, 16, true, true);//16 bytes is the only format the DFU seems to support //0x0800F800
-            //^ This string now just needs to be written out to a text file :)
-            SaveFileDialog dlg = new SaveFileDialog();
-            dlg.Title = "Save DFU File";
-            dlg.AddExtension = true;
-            dlg.DefaultExt = ".hex";
-            dlg.Filter = "Hex Files(*.hex)|*.hex";
-            if (dlg.ShowDialog() == DialogResult.OK)
-            {
-                //The user has selected where they want to save the file
-                using (var fs = new System.IO.StreamWriter(dlg.FileName))
-                {
-                    fs.Write(outputHexFile);
-                }
-            }
-
-        }
-    }
-}

Bootup Logo/Logo GUI/TS100 Logo Editor/TS100 Logo Editor/Form1.resx

@@ -1,120 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<root>
-  <!-- 
-    Microsoft ResX Schema 
-    
-    Version 2.0
-    
-    The primary goals of this format is to allow a simple XML format 
-    that is mostly human readable. The generation and parsing of the 
-    various data types are done through the TypeConverter classes 
-    associated with the data types.
-    
-    Example:
-    
-    ... ado.net/XML headers & schema ...
-    <resheader name="resmimetype">text/microsoft-resx</resheader>
-    <resheader name="version">2.0</resheader>
-    <resheader name="reader">System.Resources.ResXResourceReader, System.Windows.Forms, ...</resheader>
-    <resheader name="writer">System.Resources.ResXResourceWriter, System.Windows.Forms, ...</resheader>
-    <data name="Name1"><value>this is my long string</value><comment>this is a comment</comment></data>
-    <data name="Color1" type="System.Drawing.Color, System.Drawing">Blue</data>
-    <data name="Bitmap1" mimetype="application/x-microsoft.net.object.binary.base64">
-        <value>[base64 mime encoded serialized .NET Framework object]</value>
-    </data>
-    <data name="Icon1" type="System.Drawing.Icon, System.Drawing" mimetype="application/x-microsoft.net.object.bytearray.base64">
-        <value>[base64 mime encoded string representing a byte array form of the .NET Framework object]</value>
-        <comment>This is a comment</comment>
-    </data>
-                
-    There are any number of "resheader" rows that contain simple 
-    name/value pairs.
-    
-    Each data row contains a name, and value. The row also contains a 
-    type or mimetype. Type corresponds to a .NET class that support 
-    text/value conversion through the TypeConverter architecture. 
-    Classes that don't support this are serialized and stored with the 
-    mimetype set.
-    
-    The mimetype is used for serialized objects, and tells the 
-    ResXResourceReader how to depersist the object. This is currently not 
-    extensible. For a given mimetype the value must be set accordingly:
-    
-    Note - application/x-microsoft.net.object.binary.base64 is the format 
-    that the ResXResourceWriter will generate, however the reader can 
-    read any of the formats listed below.
-    
-    mimetype: application/x-microsoft.net.object.binary.base64
-    value   : The object must be serialized with 
-            : System.Runtime.Serialization.Formatters.Binary.BinaryFormatter
-            : and then encoded with base64 encoding.
-    
-    mimetype: application/x-microsoft.net.object.soap.base64
-    value   : The object must be serialized with 
-            : System.Runtime.Serialization.Formatters.Soap.SoapFormatter
-            : and then encoded with base64 encoding.
-
-    mimetype: application/x-microsoft.net.object.bytearray.base64
-    value   : The object must be serialized into a byte array 
-            : using a System.ComponentModel.TypeConverter
-            : and then encoded with base64 encoding.
-    -->
-  <xsd:schema id="root" xmlns="" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata">
-    <xsd:import namespace="http://www.w3.org/XML/1998/namespace" />
-    <xsd:element name="root" msdata:IsDataSet="true">
-      <xsd:complexType>
-        <xsd:choice maxOccurs="unbounded">
-          <xsd:element name="metadata">
-            <xsd:complexType>
-              <xsd:sequence>
-                <xsd:element name="value" type="xsd:string" minOccurs="0" />
-              </xsd:sequence>
-              <xsd:attribute name="name" use="required" type="xsd:string" />
-              <xsd:attribute name="type" type="xsd:string" />
-              <xsd:attribute name="mimetype" type="xsd:string" />
-              <xsd:attribute ref="xml:space" />
-            </xsd:complexType>
-          </xsd:element>
-          <xsd:element name="assembly">
-            <xsd:complexType>
-              <xsd:attribute name="alias" type="xsd:string" />
-              <xsd:attribute name="name" type="xsd:string" />
-            </xsd:complexType>
-          </xsd:element>
-          <xsd:element name="data">
-            <xsd:complexType>
-              <xsd:sequence>
-                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
-                <xsd:element name="comment" type="xsd:string" minOccurs="0" msdata:Ordinal="2" />
-              </xsd:sequence>
-              <xsd:attribute name="name" type="xsd:string" use="required" msdata:Ordinal="1" />
-              <xsd:attribute name="type" type="xsd:string" msdata:Ordinal="3" />
-              <xsd:attribute name="mimetype" type="xsd:string" msdata:Ordinal="4" />
-              <xsd:attribute ref="xml:space" />
-            </xsd:complexType>
-          </xsd:element>
-          <xsd:element name="resheader">
-            <xsd:complexType>
-              <xsd:sequence>
-                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
-              </xsd:sequence>
-              <xsd:attribute name="name" type="xsd:string" use="required" />
-            </xsd:complexType>
-          </xsd:element>
-        </xsd:choice>
-      </xsd:complexType>
-    </xsd:element>
-  </xsd:schema>
-  <resheader name="resmimetype">
-    <value>text/microsoft-resx</value>
-  </resheader>
-  <resheader name="version">
-    <value>2.0</value>
-  </resheader>
-  <resheader name="reader">
-    <value>System.Resources.ResXResourceReader, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
-  </resheader>
-  <resheader name="writer">
-    <value>System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
-  </resheader>
-</root>

Bootup Logo/Logo GUI/TS100 Logo Editor/TS100 Logo Editor/IntelHex.cs

@@ -1,96 +0,0 @@
-using System;
-using System.Collections.Generic;
-using System.ComponentModel;
-using System.Data;
-
-namespace IntelHex
-{
-    public class IntelHex
-    {
-        public static string encode(byte[] data, UInt32 startingAddress, int bytesPerLine, bool header = true,bool Addbloat=false)
-        {
-            //We are taking the byte array and encoding it into the wanted hex file contents (aka string of data).
-            //First create the starting base address record
-            //:020000040800F2
-            string Output = "";
-            if (header)
-            {
-                //Set the upper 16 bits of the address space
-                Output += getHighAddressSetLine((UInt16)(startingAddress >> 16));
-            }
-
-            //Now loop through all the data that we were given
-            for (UInt32 index = 0; index < data.Length; index = (UInt32)(index + bytesPerLine))
-            {
-                //We want to read from data[index] to data[index+bytesPerLine-1]
-                UInt32 currentAddress = (UInt32)(startingAddress + index);
-                if ((currentAddress >> 16) != (startingAddress >> 16))
-                {
-                    Output += getHighAddressSetLine((UInt16)(currentAddress >> 16));
-                    //The address has rolled over the 64K boundry, so write a new high address change line
-                }
-                //We should now be good for the higher part of the address
-                Output += encodeDataLine((UInt16)(currentAddress & 0xFFFF), data, index, bytesPerLine);
-            }
-            if(Addbloat)
-            {
-                //Repeat the instructs a stack of times to get around filesize minimums
-                for(int x=0;x<3;x++)
-                {
-                    for (UInt32 index = 0; index < data.Length; index = (UInt32)(index + bytesPerLine))
-                    {
-                        //We want to read from data[index] to data[index+bytesPerLine-1]
-                        UInt32 currentAddress = (UInt32)(startingAddress + index);
-                        if ((currentAddress >> 16) != (startingAddress >> 16))
-                        {
-                            Output += getHighAddressSetLine((UInt16)(currentAddress >> 16));
-                            //The address has rolled over the 64K boundry, so write a new high address change line
-                        }
-                        //We should now be good for the higher part of the address
-                        Output += encodeDataLine((UInt16)(currentAddress & 0xFFFF), data, index, bytesPerLine);
-                    }
-                }
-            }
-            //We have now written out all the data lines
-            Output += ":00000001FF\r\n";//End of file marker
-
-            return Output;
-        }
-        private static string encodeDataLine(UInt16 address, byte[] data, UInt32 startindex, int bytes)
-        {
-            string line = ":";
-            line += bytes.ToString("X2");//add the marker of line length
-            line += address.ToString("X4");//write the address
-            line += "00";//Data line
-            //Next copy bytes bytes 
-            for (int i = 0; i < bytes; i++)
-            {
-                if ((startindex + i) < data.Length)
-                    line += data[startindex + i].ToString("X2");
-                else
-                    line += "FF";//pad images out with FF
-            }
-            line += checksumLine(line);//Adds checksum and EOL
-            return line;
-        }
-        private static string getHighAddressSetLine(UInt16 HighAddress)
-        {
-            string Output = "";
-            Output += ":02000004" + (HighAddress).ToString("X4");
-            Output += checksumLine(Output);
-            return Output;
-        }
-        private static string checksumLine(string line)
-        {
-            //We want to convert the string line to each byte and sum. 
-            byte sum = 0;
-            for (int i = 1; i < line.Length; i += 2)
-            {
-                byte b = byte.Parse((line.Substring(i, 2)), System.Globalization.NumberStyles.HexNumber);
-                sum += b;
-            }
-            byte checksum = (byte)(((byte)0) - sum);//invert
-            return checksum.ToString("X2") + "\r\n";
-        }
-    }
-}

Bootup Logo/Logo GUI/TS100 Logo Editor/TS100 Logo Editor/Program.cs

@@ -1,22 +0,0 @@
-using System;
-using System.Collections.Generic;
-using System.Linq;
-using System.Threading.Tasks;
-using System.Windows.Forms;
-
-namespace TS100_Logo_Editor
-{
-    static class Program
-    {
-        /// <summary>
-        /// The main entry point for the application.
-        /// </summary>
-        [STAThread]
-        static void Main()
-        {
-            Application.EnableVisualStyles();
-            Application.SetCompatibleTextRenderingDefault(false);
-            Application.Run(new Form1());
-        }
-    }
-}

Bootup Logo/Logo GUI/TS100 Logo Editor/TS100 Logo Editor/Properties/AssemblyInfo.cs

@@ -1,36 +0,0 @@
-using System.Reflection;
-using System.Runtime.CompilerServices;
-using System.Runtime.InteropServices;
-
-// General Information about an assembly is controlled through the following
-// set of attributes. Change these attribute values to modify the information
-// associated with an assembly.
-[assembly: AssemblyTitle("TS100 Logo Editor")]
-[assembly: AssemblyDescription("")]
-[assembly: AssemblyConfiguration("")]
-[assembly: AssemblyCompany("")]
-[assembly: AssemblyProduct("TS100 Logo Editor")]
-[assembly: AssemblyCopyright("Copyright ©  2017")]
-[assembly: AssemblyTrademark("")]
-[assembly: AssemblyCulture("")]
-
-// Setting ComVisible to false makes the types in this assembly not visible
-// to COM components.  If you need to access a type in this assembly from
-// COM, set the ComVisible attribute to true on that type.
-[assembly: ComVisible(false)]
-
-// The following GUID is for the ID of the typelib if this project is exposed to COM
-[assembly: Guid("206c8aef-3be6-44e9-a1b0-25bf3805f1cb")]
-
-// Version information for an assembly consists of the following four values:
-//
-//      Major Version
-//      Minor Version
-//      Build Number
-//      Revision
-//
-// You can specify all the values or you can default the Build and Revision Numbers
-// by using the '*' as shown below:
-// [assembly: AssemblyVersion("1.0.*")]
-[assembly: AssemblyVersion("1.0.0.0")]
-[assembly: AssemblyFileVersion("1.0.0.0")]

Bootup Logo/Logo GUI/TS100 Logo Editor/TS100 Logo Editor/Properties/Resources.Designer.cs

@@ -1,63 +0,0 @@
-//------------------------------------------------------------------------------
-// <auto-generated>
-//     This code was generated by a tool.
-//     Runtime Version:4.0.30319.42000
-//
-//     Changes to this file may cause incorrect behavior and will be lost if
-//     the code is regenerated.
-// </auto-generated>
-//------------------------------------------------------------------------------
-
-namespace TS100_Logo_Editor.Properties {
-    using System;
-    
-    
-    /// <summary>
-    ///   A strongly-typed resource class, for looking up localized strings, etc.
-    /// </summary>
-    // This class was auto-generated by the StronglyTypedResourceBuilder
-    // class via a tool like ResGen or Visual Studio.
-    // To add or remove a member, edit your .ResX file then rerun ResGen
-    // with the /str option, or rebuild your VS project.
-    [global::System.CodeDom.Compiler.GeneratedCodeAttribute("System.Resources.Tools.StronglyTypedResourceBuilder", "4.0.0.0")]
-    [global::System.Diagnostics.DebuggerNonUserCodeAttribute()]
-    [global::System.Runtime.CompilerServices.CompilerGeneratedAttribute()]
-    internal class Resources {
-        
-        private static global::System.Resources.ResourceManager resourceMan;
-        
-        private static global::System.Globalization.CultureInfo resourceCulture;
-        
-        [global::System.Diagnostics.CodeAnalysis.SuppressMessageAttribute("Microsoft.Performance", "CA1811:AvoidUncalledPrivateCode")]
-        internal Resources() {
-        }
-        
-        /// <summary>
-        ///   Returns the cached ResourceManager instance used by this class.
-        /// </summary>
-        [global::System.ComponentModel.EditorBrowsableAttribute(global::System.ComponentModel.EditorBrowsableState.Advanced)]
-        internal static global::System.Resources.ResourceManager ResourceManager {
-            get {
-                if (object.ReferenceEquals(resourceMan, null)) {
-                    global::System.Resources.ResourceManager temp = new global::System.Resources.ResourceManager("TS100_Logo_Editor.Properties.Resources", typeof(Resources).Assembly);
-                    resourceMan = temp;
-                }
-                return resourceMan;
-            }
-        }
-        
-        /// <summary>
-        ///   Overrides the current thread's CurrentUICulture property for all
-        ///   resource lookups using this strongly typed resource class.
-        /// </summary>
-        [global::System.ComponentModel.EditorBrowsableAttribute(global::System.ComponentModel.EditorBrowsableState.Advanced)]
-        internal static global::System.Globalization.CultureInfo Culture {
-            get {
-                return resourceCulture;
-            }
-            set {
-                resourceCulture = value;
-            }
-        }
-    }
-}

Bootup Logo/Logo GUI/TS100 Logo Editor/TS100 Logo Editor/Properties/Resources.resx

@@ -1,117 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<root>
-  <!-- 
-    Microsoft ResX Schema 
-    
-    Version 2.0
-    
-    The primary goals of this format is to allow a simple XML format 
-    that is mostly human readable. The generation and parsing of the 
-    various data types are done through the TypeConverter classes 
-    associated with the data types.
-    
-    Example:
-    
-    ... ado.net/XML headers & schema ...
-    <resheader name="resmimetype">text/microsoft-resx</resheader>
-    <resheader name="version">2.0</resheader>
-    <resheader name="reader">System.Resources.ResXResourceReader, System.Windows.Forms, ...</resheader>
-    <resheader name="writer">System.Resources.ResXResourceWriter, System.Windows.Forms, ...</resheader>
-    <data name="Name1"><value>this is my long string</value><comment>this is a comment</comment></data>
-    <data name="Color1" type="System.Drawing.Color, System.Drawing">Blue</data>
-    <data name="Bitmap1" mimetype="application/x-microsoft.net.object.binary.base64">
-        <value>[base64 mime encoded serialized .NET Framework object]</value>
-    </data>
-    <data name="Icon1" type="System.Drawing.Icon, System.Drawing" mimetype="application/x-microsoft.net.object.bytearray.base64">
-        <value>[base64 mime encoded string representing a byte array form of the .NET Framework object]</value>
-        <comment>This is a comment</comment>
-    </data>
-                
-    There are any number of "resheader" rows that contain simple 
-    name/value pairs.
-    
-    Each data row contains a name, and value. The row also contains a 
-    type or mimetype. Type corresponds to a .NET class that support 
-    text/value conversion through the TypeConverter architecture. 
-    Classes that don't support this are serialized and stored with the 
-    mimetype set.
-    
-    The mimetype is used for serialized objects, and tells the 
-    ResXResourceReader how to depersist the object. This is currently not 
-    extensible. For a given mimetype the value must be set accordingly:
-    
-    Note - application/x-microsoft.net.object.binary.base64 is the format 
-    that the ResXResourceWriter will generate, however the reader can 
-    read any of the formats listed below.
-    
-    mimetype: application/x-microsoft.net.object.binary.base64
-    value   : The object must be serialized with 
-            : System.Serialization.Formatters.Binary.BinaryFormatter
-            : and then encoded with base64 encoding.
-    
-    mimetype: application/x-microsoft.net.object.soap.base64
-    value   : The object must be serialized with 
-            : System.Runtime.Serialization.Formatters.Soap.SoapFormatter
-            : and then encoded with base64 encoding.
-
-    mimetype: application/x-microsoft.net.object.bytearray.base64
-    value   : The object must be serialized into a byte array 
-            : using a System.ComponentModel.TypeConverter
-            : and then encoded with base64 encoding.
-    -->
-  <xsd:schema id="root" xmlns="" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata">
-    <xsd:element name="root" msdata:IsDataSet="true">
-      <xsd:complexType>
-        <xsd:choice maxOccurs="unbounded">
-          <xsd:element name="metadata">
-            <xsd:complexType>
-              <xsd:sequence>
-                <xsd:element name="value" type="xsd:string" minOccurs="0" />
-              </xsd:sequence>
-              <xsd:attribute name="name" type="xsd:string" />
-              <xsd:attribute name="type" type="xsd:string" />
-              <xsd:attribute name="mimetype" type="xsd:string" />
-            </xsd:complexType>
-          </xsd:element>
-          <xsd:element name="assembly">
-            <xsd:complexType>
-              <xsd:attribute name="alias" type="xsd:string" />
-              <xsd:attribute name="name" type="xsd:string" />
-            </xsd:complexType>
-          </xsd:element>
-          <xsd:element name="data">
-            <xsd:complexType>
-              <xsd:sequence>
-                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
-                <xsd:element name="comment" type="xsd:string" minOccurs="0" msdata:Ordinal="2" />
-              </xsd:sequence>
-              <xsd:attribute name="name" type="xsd:string" msdata:Ordinal="1" />
-              <xsd:attribute name="type" type="xsd:string" msdata:Ordinal="3" />
-              <xsd:attribute name="mimetype" type="xsd:string" msdata:Ordinal="4" />
-            </xsd:complexType>
-          </xsd:element>
-          <xsd:element name="resheader">
-            <xsd:complexType>
-              <xsd:sequence>
-                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
-              </xsd:sequence>
-              <xsd:attribute name="name" type="xsd:string" use="required" />
-            </xsd:complexType>
-          </xsd:element>
-        </xsd:choice>
-      </xsd:complexType>
-    </xsd:element>
-  </xsd:schema>
-  <resheader name="resmimetype">
-    <value>text/microsoft-resx</value>
-  </resheader>
-  <resheader name="version">
-    <value>2.0</value>
-  </resheader>
-  <resheader name="reader">
-    <value>System.Resources.ResXResourceReader, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
-  </resheader>
-  <resheader name="writer">
-    <value>System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
-  </resheader>
-</root>

Bootup Logo/Logo GUI/TS100 Logo Editor/TS100 Logo Editor/Properties/Settings.Designer.cs

@@ -1,26 +0,0 @@
-//------------------------------------------------------------------------------
-// <auto-generated>
-//     This code was generated by a tool.
-//     Runtime Version:4.0.30319.42000
-//
-//     Changes to this file may cause incorrect behavior and will be lost if
-//     the code is regenerated.
-// </auto-generated>
-//------------------------------------------------------------------------------
-
-namespace TS100_Logo_Editor.Properties {
-    
-    
-    [global::System.Runtime.CompilerServices.CompilerGeneratedAttribute()]
-    [global::System.CodeDom.Compiler.GeneratedCodeAttribute("Microsoft.VisualStudio.Editors.SettingsDesigner.SettingsSingleFileGenerator", "15.1.0.0")]
-    internal sealed partial class Settings : global::System.Configuration.ApplicationSettingsBase {
-        
-        private static Settings defaultInstance = ((Settings)(global::System.Configuration.ApplicationSettingsBase.Synchronized(new Settings())));
-        
-        public static Settings Default {
-            get {
-                return defaultInstance;
-            }
-        }
-    }
-}

Bootup Logo/Logo GUI/TS100 Logo Editor/TS100 Logo Editor/Properties/Settings.settings

@@ -1,7 +0,0 @@
-<?xml version='1.0' encoding='utf-8'?>
-<SettingsFile xmlns="http://schemas.microsoft.com/VisualStudio/2004/01/settings" CurrentProfile="(Default)">
-  <Profiles>
-    <Profile Name="(Default)" />
-  </Profiles>
-  <Settings />
-</SettingsFile>

Bootup Logo/Logo GUI/TS100 Logo Editor/TS100 Logo Editor/TS100 Logo Editor.csproj

@@ -1,87 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<Project ToolsVersion="15.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
-  <Import Project="$(MSBuildExtensionsPath)\$(MSBuildToolsVersion)\Microsoft.Common.props" Condition="Exists('$(MSBuildExtensionsPath)\$(MSBuildToolsVersion)\Microsoft.Common.props')" />
-  <PropertyGroup>
-    <Configuration Condition=" '$(Configuration)' == '' ">Debug</Configuration>
-    <Platform Condition=" '$(Platform)' == '' ">AnyCPU</Platform>
-    <ProjectGuid>{206C8AEF-3BE6-44E9-A1B0-25BF3805F1CB}</ProjectGuid>
-    <OutputType>WinExe</OutputType>
-    <RootNamespace>TS100_Logo_Editor</RootNamespace>
-    <AssemblyName>TS100 Logo Editor</AssemblyName>
-    <TargetFrameworkVersion>v4.0</TargetFrameworkVersion>
-    <FileAlignment>512</FileAlignment>
-    <TargetFrameworkProfile />
-  </PropertyGroup>
-  <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Debug|AnyCPU' ">
-    <PlatformTarget>AnyCPU</PlatformTarget>
-    <DebugSymbols>true</DebugSymbols>
-    <DebugType>full</DebugType>
-    <Optimize>false</Optimize>
-    <OutputPath>bin\Debug\</OutputPath>
-    <DefineConstants>DEBUG;TRACE</DefineConstants>
-    <ErrorReport>prompt</ErrorReport>
-    <WarningLevel>4</WarningLevel>
-  </PropertyGroup>
-  <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Release|AnyCPU' ">
-    <PlatformTarget>AnyCPU</PlatformTarget>
-    <DebugType>pdbonly</DebugType>
-    <Optimize>true</Optimize>
-    <OutputPath>bin\Release\</OutputPath>
-    <DefineConstants>
-    </DefineConstants>
-    <ErrorReport>prompt</ErrorReport>
-    <WarningLevel>4</WarningLevel>
-  </PropertyGroup>
-  <PropertyGroup>
-    <StartupObject>TS100_Logo_Editor.Program</StartupObject>
-  </PropertyGroup>
-  <ItemGroup>
-    <Reference Include="System" />
-    <Reference Include="System.Core" />
-    <Reference Include="System.Xml.Linq" />
-    <Reference Include="System.Data.DataSetExtensions" />
-    <Reference Include="Microsoft.CSharp" />
-    <Reference Include="System.Data" />
-    <Reference Include="System.Deployment" />
-    <Reference Include="System.Drawing" />
-    <Reference Include="System.Windows.Forms" />
-    <Reference Include="System.Xml" />
-  </ItemGroup>
-  <ItemGroup>
-    <Compile Include="Form1.cs">
-      <SubType>Form</SubType>
-    </Compile>
-    <Compile Include="Form1.Designer.cs">
-      <DependentUpon>Form1.cs</DependentUpon>
-    </Compile>
-    <Compile Include="IntelHex.cs" />
-    <Compile Include="Program.cs" />
-    <Compile Include="Properties\AssemblyInfo.cs" />
-    <EmbeddedResource Include="Form1.resx">
-      <DependentUpon>Form1.cs</DependentUpon>
-    </EmbeddedResource>
-    <EmbeddedResource Include="Properties\Resources.resx">
-      <Generator>ResXFileCodeGenerator</Generator>
-      <LastGenOutput>Resources.Designer.cs</LastGenOutput>
-      <SubType>Designer</SubType>
-    </EmbeddedResource>
-    <Compile Include="Properties\Resources.Designer.cs">
-      <AutoGen>True</AutoGen>
-      <DependentUpon>Resources.resx</DependentUpon>
-      <DesignTime>True</DesignTime>
-    </Compile>
-    <None Include="Properties\Settings.settings">
-      <Generator>SettingsSingleFileGenerator</Generator>
-      <LastGenOutput>Settings.Designer.cs</LastGenOutput>
-    </None>
-    <Compile Include="Properties\Settings.Designer.cs">
-      <AutoGen>True</AutoGen>
-      <DependentUpon>Settings.settings</DependentUpon>
-      <DesignTimeSharedInput>True</DesignTimeSharedInput>
-    </Compile>
-  </ItemGroup>
-  <ItemGroup>
-    <None Include="App.config" />
-  </ItemGroup>
-  <Import Project="$(MSBuildToolsPath)\Microsoft.CSharp.targets" />
-</Project>

Bootup Logo/Logos/001_TS100.hex

@@ -1,258 +0,0 @@
-:020000040800F2
-:10F8000055AA0DF080002A54821580818080808066
-:10F8100080808080808080808080808000000000E8
-:10F82000000000004080402020C020201010080868
-:10F8300008080C080C0C0C0C080808080C0C0C0C24
-:10F84000E80CA8A8A828E8A8C808A828A8A848A834
-:10F850008808284808E828C828A80CCC28CC28A85C
-:10F8600008C800F80200050208050808080808088A
-:10F8700008080A080A090A090A0908090505050508
-:10F880000505050510081020201F4040404020407D
-:10F890002020202020202020202020202020202068
-:10F8A00020202F202F28202025202A2A2A2A2728F6
-:10F8B0002120282F202F2827282B20272827282BD6
-:10F8C0002027001F000000000000000000000000D2
-:10F8D0000000000000000000000000000000000028
-:10F8E0000000000000000000000000000000000018
-:10F8F0000000000000000000000000000000000008
-:10F9000000000000000000000000000000000000F7
-:10F9100000000000000000000000000000000000E7
-:10F9200000000000000000000000000000000000D7
-:10F9300000000000000000000000000000000000C7
-:10F9400000000000000000000000000000000000B7
-:10F9500000000000000000000000000000000000A7
-:10F960000000000000000000000000000000000097
-:10F970000000000000000000000000000000000087
-:10F980000000000000000000000000000000000077
-:10F990000000000000000000000000000000000067
-:10F9A0000000000000000000000000000000000057
-:10F9B0000000000000000000000000000000000047
-:10F9C0000000000000000000000000000000000037
-:10F9D0000000000000000000000000000000000027
-:10F9E0000000000000000000000000000000000017
-:10F9F0000000000000000000000000000000000007
-:10FA000000000000000000000000000000000000F6
-:10FA100000000000000000000000000000000000E6
-:10FA200000000000000000000000000000000000D6
-:10FA300000000000000000000000000000000000C6
-:10FA400000000000000000000000000000000000B6
-:10FA500000000000000000000000000000000000A6
-:10FA60000000000000000000000000000000000096
-:10FA70000000000000000000000000000000000086
-:10FA80000000000000000000000000000000000076
-:10FA90000000000000000000000000000000000066
-:10FAA0000000000000000000000000000000000056
-:10FAB0000000000000000000000000000000000046
-:10FAC0000000000000000000000000000000000036
-:10FAD0000000000000000000000000000000000026
-:10FAE0000000000000000000000000000000000016
-:10FAF0000000000000000000000000000000000006
-:10FB000000000000000000000000000000000000F5
-:10FB100000000000000000000000000000000000E5
-:10FB200000000000000000000000000000000000D5
-:10FB300000000000000000000000000000000000C5
-:10FB400000000000000000000000000000000000B5
-:10FB500000000000000000000000000000000000A5
-:10FB60000000000000000000000000000000000095
-:10FB70000000000000000000000000000000000085
-:10FB80000000000000000000000000000000000075
-:10FB90000000000000000000000000000000000065
-:10FBA0000000000000000000000000000000000055
-:10FBB0000000000000000000000000000000000045
-:10FBC0000000000000000000000000000000000035
-:10FBD0000000000000000000000000000000000025
-:10FBE0000000000000000000000000000000000015
-:10FBF0000000000000000000000000000000000005
-:10F8000055AA0DF080002A54821580818080808066
-:10F8100080808080808080808080808000000000E8
-:10F82000000000004080402020C020201010080868
-:10F8300008080C080C0C0C0C080808080C0C0C0C24
-:10F84000E80CA8A8A828E8A8C808A828A8A848A834
-:10F850008808284808E828C828A80CCC28CC28A85C
-:10F8600008C800F80200050208050808080808088A
-:10F8700008080A080A090A090A0908090505050508
-:10F880000505050510081020201F4040404020407D
-:10F890002020202020202020202020202020202068
-:10F8A00020202F202F28202025202A2A2A2A2728F6
-:10F8B0002120282F202F2827282B20272827282BD6
-:10F8C0002027001F000000000000000000000000D2
-:10F8D0000000000000000000000000000000000028
-:10F8E0000000000000000000000000000000000018
-:10F8F0000000000000000000000000000000000008
-:10F9000000000000000000000000000000000000F7
-:10F9100000000000000000000000000000000000E7
-:10F9200000000000000000000000000000000000D7
-:10F9300000000000000000000000000000000000C7
-:10F9400000000000000000000000000000000000B7
-:10F9500000000000000000000000000000000000A7
-:10F960000000000000000000000000000000000097
-:10F970000000000000000000000000000000000087
-:10F980000000000000000000000000000000000077
-:10F990000000000000000000000000000000000067
-:10F9A0000000000000000000000000000000000057
-:10F9B0000000000000000000000000000000000047
-:10F9C0000000000000000000000000000000000037
-:10F9D0000000000000000000000000000000000027
-:10F9E0000000000000000000000000000000000017
-:10F9F0000000000000000000000000000000000007
-:10FA000000000000000000000000000000000000F6
-:10FA100000000000000000000000000000000000E6
-:10FA200000000000000000000000000000000000D6
-:10FA300000000000000000000000000000000000C6
-:10FA400000000000000000000000000000000000B6
-:10FA500000000000000000000000000000000000A6
-:10FA60000000000000000000000000000000000096
-:10FA70000000000000000000000000000000000086
-:10FA80000000000000000000000000000000000076
-:10FA90000000000000000000000000000000000066
-:10FAA0000000000000000000000000000000000056
-:10FAB0000000000000000000000000000000000046
-:10FAC0000000000000000000000000000000000036
-:10FAD0000000000000000000000000000000000026
-:10FAE0000000000000000000000000000000000016
-:10FAF0000000000000000000000000000000000006
-:10FB000000000000000000000000000000000000F5
-:10FB100000000000000000000000000000000000E5
-:10FB200000000000000000000000000000000000D5
-:10FB300000000000000000000000000000000000C5
-:10FB400000000000000000000000000000000000B5
-:10FB500000000000000000000000000000000000A5
-:10FB60000000000000000000000000000000000095
-:10FB70000000000000000000000000000000000085
-:10FB80000000000000000000000000000000000075
-:10FB90000000000000000000000000000000000065
-:10FBA0000000000000000000000000000000000055
-:10FBB0000000000000000000000000000000000045
-:10FBC0000000000000000000000000000000000035
-:10FBD0000000000000000000000000000000000025
-:10FBE0000000000000000000000000000000000015
-:10FBF0000000000000000000000000000000000005
-:10F8000055AA0DF080002A54821580818080808066
-:10F8100080808080808080808080808000000000E8
-:10F82000000000004080402020C020201010080868
-:10F8300008080C080C0C0C0C080808080C0C0C0C24
-:10F84000E80CA8A8A828E8A8C808A828A8A848A834
-:10F850008808284808E828C828A80CCC28CC28A85C
-:10F8600008C800F80200050208050808080808088A
-:10F8700008080A080A090A090A0908090505050508
-:10F880000505050510081020201F4040404020407D
-:10F890002020202020202020202020202020202068
-:10F8A00020202F202F28202025202A2A2A2A2728F6
-:10F8B0002120282F202F2827282B20272827282BD6
-:10F8C0002027001F000000000000000000000000D2
-:10F8D0000000000000000000000000000000000028
-:10F8E0000000000000000000000000000000000018
-:10F8F0000000000000000000000000000000000008
-:10F9000000000000000000000000000000000000F7
-:10F9100000000000000000000000000000000000E7
-:10F9200000000000000000000000000000000000D7
-:10F9300000000000000000000000000000000000C7
-:10F9400000000000000000000000000000000000B7
-:10F9500000000000000000000000000000000000A7
-:10F960000000000000000000000000000000000097
-:10F970000000000000000000000000000000000087
-:10F980000000000000000000000000000000000077
-:10F990000000000000000000000000000000000067
-:10F9A0000000000000000000000000000000000057
-:10F9B0000000000000000000000000000000000047
-:10F9C0000000000000000000000000000000000037
-:10F9D0000000000000000000000000000000000027
-:10F9E0000000000000000000000000000000000017
-:10F9F0000000000000000000000000000000000007
-:10FA000000000000000000000000000000000000F6
-:10FA100000000000000000000000000000000000E6
-:10FA200000000000000000000000000000000000D6
-:10FA300000000000000000000000000000000000C6
-:10FA400000000000000000000000000000000000B6
-:10FA500000000000000000000000000000000000A6
-:10FA60000000000000000000000000000000000096
-:10FA70000000000000000000000000000000000086
-:10FA80000000000000000000000000000000000076
-:10FA90000000000000000000000000000000000066
-:10FAA0000000000000000000000000000000000056
-:10FAB0000000000000000000000000000000000046
-:10FAC0000000000000000000000000000000000036
-:10FAD0000000000000000000000000000000000026
-:10FAE0000000000000000000000000000000000016
-:10FAF0000000000000000000000000000000000006
-:10FB000000000000000000000000000000000000F5
-:10FB100000000000000000000000000000000000E5
-:10FB200000000000000000000000000000000000D5
-:10FB300000000000000000000000000000000000C5
-:10FB400000000000000000000000000000000000B5
-:10FB500000000000000000000000000000000000A5
-:10FB60000000000000000000000000000000000095
-:10FB70000000000000000000000000000000000085
-:10FB80000000000000000000000000000000000075
-:10FB90000000000000000000000000000000000065
-:10FBA0000000000000000000000000000000000055
-:10FBB0000000000000000000000000000000000045
-:10FBC0000000000000000000000000000000000035
-:10FBD0000000000000000000000000000000000025
-:10FBE0000000000000000000000000000000000015
-:10FBF0000000000000000000000000000000000005
-:10F8000055AA0DF080002A54821580818080808066
-:10F8100080808080808080808080808000000000E8
-:10F82000000000004080402020C020201010080868
-:10F8300008080C080C0C0C0C080808080C0C0C0C24
-:10F84000E80CA8A8A828E8A8C808A828A8A848A834
-:10F850008808284808E828C828A80CCC28CC28A85C
-:10F8600008C800F80200050208050808080808088A
-:10F8700008080A080A090A090A0908090505050508
-:10F880000505050510081020201F4040404020407D
-:10F890002020202020202020202020202020202068
-:10F8A00020202F202F28202025202A2A2A2A2728F6
-:10F8B0002120282F202F2827282B20272827282BD6
-:10F8C0002027001F000000000000000000000000D2
-:10F8D0000000000000000000000000000000000028
-:10F8E0000000000000000000000000000000000018
-:10F8F0000000000000000000000000000000000008
-:10F9000000000000000000000000000000000000F7
-:10F9100000000000000000000000000000000000E7
-:10F9200000000000000000000000000000000000D7
-:10F9300000000000000000000000000000000000C7
-:10F9400000000000000000000000000000000000B7
-:10F9500000000000000000000000000000000000A7
-:10F960000000000000000000000000000000000097
-:10F970000000000000000000000000000000000087
-:10F980000000000000000000000000000000000077
-:10F990000000000000000000000000000000000067
-:10F9A0000000000000000000000000000000000057
-:10F9B0000000000000000000000000000000000047
-:10F9C0000000000000000000000000000000000037
-:10F9D0000000000000000000000000000000000027
-:10F9E0000000000000000000000000000000000017
-:10F9F0000000000000000000000000000000000007
-:10FA000000000000000000000000000000000000F6
-:10FA100000000000000000000000000000000000E6
-:10FA200000000000000000000000000000000000D6
-:10FA300000000000000000000000000000000000C6
-:10FA400000000000000000000000000000000000B6
-:10FA500000000000000000000000000000000000A6
-:10FA60000000000000000000000000000000000096
-:10FA70000000000000000000000000000000000086
-:10FA80000000000000000000000000000000000076
-:10FA90000000000000000000000000000000000066
-:10FAA0000000000000000000000000000000000056
-:10FAB0000000000000000000000000000000000046
-:10FAC0000000000000000000000000000000000036
-:10FAD0000000000000000000000000000000000026
-:10FAE0000000000000000000000000000000000016
-:10FAF0000000000000000000000000000000000006
-:10FB000000000000000000000000000000000000F5
-:10FB100000000000000000000000000000000000E5
-:10FB200000000000000000000000000000000000D5
-:10FB300000000000000000000000000000000000C5
-:10FB400000000000000000000000000000000000B5
-:10FB500000000000000000000000000000000000A5
-:10FB60000000000000000000000000000000000095
-:10FB70000000000000000000000000000000000085
-:10FB80000000000000000000000000000000000075
-:10FB90000000000000000000000000000000000065
-:10FBA0000000000000000000000000000000000055
-:10FBB0000000000000000000000000000000000045
-:10FBC0000000000000000000000000000000000035
-:10FBD0000000000000000000000000000000000025
-:10FBE0000000000000000000000000000000000015
-:10FBF0000000000000000000000000000000000005
-:00000001FF

Bootup Logo/Logos/001_TS100_Left.hex

@@ -1,258 +0,0 @@
-:020000040800F2
-:10F8000055AA0DF0F800E808A8A8AC28ECACC80888
-:10F81000A828A8A848A88808284808E828C828A828
-:10F8200008C828C828A80CC80C0C0C0C0808080824
-:10F830000C0C0C0C080C0808080810102020C02024
-:10F840002040804000000000000000008080808098
-:10F850008080808080808080808080808180158210
-:10F86000542A00801F0020202F202F282020252010
-:10F870002A2A2A2A27282120282F202F2827282B08
-:10F8800020272827282B2027202020202020202048
-:10F8900020202020202020204020404040401F20C9
-:10F8A0002010081005050505050505050908090AC4
-:10F8B000090A090A080A08080808080808080508C3
-:10F8C000020500020000000000000000000000002F
-:10F8D0000000000000000000000000000000000028
-:10F8E0000000000000000000000000000000000018
-:10F8F0000000000000000000000000000000000008
-:10F9000000000000000000000000000000000000F7
-:10F9100000000000000000000000000000000000E7
-:10F9200000000000000000000000000000000000D7
-:10F9300000000000000000000000000000000000C7
-:10F9400000000000000000000000000000000000B7
-:10F9500000000000000000000000000000000000A7
-:10F960000000000000000000000000000000000097
-:10F970000000000000000000000000000000000087
-:10F980000000000000000000000000000000000077
-:10F990000000000000000000000000000000000067
-:10F9A0000000000000000000000000000000000057
-:10F9B0000000000000000000000000000000000047
-:10F9C0000000000000000000000000000000000037
-:10F9D0000000000000000000000000000000000027
-:10F9E0000000000000000000000000000000000017
-:10F9F0000000000000000000000000000000000007
-:10FA000000000000000000000000000000000000F6
-:10FA100000000000000000000000000000000000E6
-:10FA200000000000000000000000000000000000D6
-:10FA300000000000000000000000000000000000C6
-:10FA400000000000000000000000000000000000B6
-:10FA500000000000000000000000000000000000A6
-:10FA60000000000000000000000000000000000096
-:10FA70000000000000000000000000000000000086
-:10FA80000000000000000000000000000000000076
-:10FA90000000000000000000000000000000000066
-:10FAA0000000000000000000000000000000000056
-:10FAB0000000000000000000000000000000000046
-:10FAC0000000000000000000000000000000000036
-:10FAD0000000000000000000000000000000000026
-:10FAE0000000000000000000000000000000000016
-:10FAF0000000000000000000000000000000000006
-:10FB000000000000000000000000000000000000F5
-:10FB100000000000000000000000000000000000E5
-:10FB200000000000000000000000000000000000D5
-:10FB300000000000000000000000000000000000C5
-:10FB400000000000000000000000000000000000B5
-:10FB500000000000000000000000000000000000A5
-:10FB60000000000000000000000000000000000095
-:10FB70000000000000000000000000000000000085
-:10FB80000000000000000000000000000000000075
-:10FB90000000000000000000000000000000000065
-:10FBA0000000000000000000000000000000000055
-:10FBB0000000000000000000000000000000000045
-:10FBC0000000000000000000000000000000000035
-:10FBD0000000000000000000000000000000000025
-:10FBE0000000000000000000000000000000000015
-:10FBF0000000000000000000000000000000000005
-:10F8000055AA0DF0F800E808A8A8AC28ECACC80888
-:10F81000A828A8A848A88808284808E828C828A828
-:10F8200008C828C828A80CC80C0C0C0C0808080824
-:10F830000C0C0C0C080C0808080810102020C02024
-:10F840002040804000000000000000008080808098
-:10F850008080808080808080808080808180158210
-:10F86000542A00801F0020202F202F282020252010
-:10F870002A2A2A2A27282120282F202F2827282B08
-:10F8800020272827282B2027202020202020202048
-:10F8900020202020202020204020404040401F20C9
-:10F8A0002010081005050505050505050908090AC4
-:10F8B000090A090A080A08080808080808080508C3
-:10F8C000020500020000000000000000000000002F
-:10F8D0000000000000000000000000000000000028
-:10F8E0000000000000000000000000000000000018
-:10F8F0000000000000000000000000000000000008
-:10F9000000000000000000000000000000000000F7
-:10F9100000000000000000000000000000000000E7
-:10F9200000000000000000000000000000000000D7
-:10F9300000000000000000000000000000000000C7
-:10F9400000000000000000000000000000000000B7
-:10F9500000000000000000000000000000000000A7
-:10F960000000000000000000000000000000000097
-:10F970000000000000000000000000000000000087
-:10F980000000000000000000000000000000000077
-:10F990000000000000000000000000000000000067
-:10F9A0000000000000000000000000000000000057
-:10F9B0000000000000000000000000000000000047
-:10F9C0000000000000000000000000000000000037
-:10F9D0000000000000000000000000000000000027
-:10F9E0000000000000000000000000000000000017
-:10F9F0000000000000000000000000000000000007
-:10FA000000000000000000000000000000000000F6
-:10FA100000000000000000000000000000000000E6
-:10FA200000000000000000000000000000000000D6
-:10FA300000000000000000000000000000000000C6
-:10FA400000000000000000000000000000000000B6
-:10FA500000000000000000000000000000000000A6
-:10FA60000000000000000000000000000000000096
-:10FA70000000000000000000000000000000000086
-:10FA80000000000000000000000000000000000076
-:10FA90000000000000000000000000000000000066
-:10FAA0000000000000000000000000000000000056
-:10FAB0000000000000000000000000000000000046
-:10FAC0000000000000000000000000000000000036
-:10FAD0000000000000000000000000000000000026
-:10FAE0000000000000000000000000000000000016
-:10FAF0000000000000000000000000000000000006
-:10FB000000000000000000000000000000000000F5
-:10FB100000000000000000000000000000000000E5
-:10FB200000000000000000000000000000000000D5
-:10FB300000000000000000000000000000000000C5
-:10FB400000000000000000000000000000000000B5
-:10FB500000000000000000000000000000000000A5
-:10FB60000000000000000000000000000000000095
-:10FB70000000000000000000000000000000000085
-:10FB80000000000000000000000000000000000075
-:10FB90000000000000000000000000000000000065
-:10FBA0000000000000000000000000000000000055
-:10FBB0000000000000000000000000000000000045
-:10FBC0000000000000000000000000000000000035
-:10FBD0000000000000000000000000000000000025
-:10FBE0000000000000000000000000000000000015
-:10FBF0000000000000000000000000000000000005
-:10F8000055AA0DF0F800E808A8A8AC28ECACC80888
-:10F81000A828A8A848A88808284808E828C828A828
-:10F8200008C828C828A80CC80C0C0C0C0808080824
-:10F830000C0C0C0C080C0808080810102020C02024
-:10F840002040804000000000000000008080808098
-:10F850008080808080808080808080808180158210
-:10F86000542A00801F0020202F202F282020252010
-:10F870002A2A2A2A27282120282F202F2827282B08
-:10F8800020272827282B2027202020202020202048
-:10F8900020202020202020204020404040401F20C9
-:10F8A0002010081005050505050505050908090AC4
-:10F8B000090A090A080A08080808080808080508C3
-:10F8C000020500020000000000000000000000002F
-:10F8D0000000000000000000000000000000000028
-:10F8E0000000000000000000000000000000000018
-:10F8F0000000000000000000000000000000000008
-:10F9000000000000000000000000000000000000F7
-:10F9100000000000000000000000000000000000E7
-:10F9200000000000000000000000000000000000D7
-:10F9300000000000000000000000000000000000C7
-:10F9400000000000000000000000000000000000B7
-:10F9500000000000000000000000000000000000A7
-:10F960000000000000000000000000000000000097
-:10F970000000000000000000000000000000000087
-:10F980000000000000000000000000000000000077
-:10F990000000000000000000000000000000000067
-:10F9A0000000000000000000000000000000000057
-:10F9B0000000000000000000000000000000000047
-:10F9C0000000000000000000000000000000000037
-:10F9D0000000000000000000000000000000000027
-:10F9E0000000000000000000000000000000000017
-:10F9F0000000000000000000000000000000000007
-:10FA000000000000000000000000000000000000F6
-:10FA100000000000000000000000000000000000E6
-:10FA200000000000000000000000000000000000D6
-:10FA300000000000000000000000000000000000C6
-:10FA400000000000000000000000000000000000B6
-:10FA500000000000000000000000000000000000A6
-:10FA60000000000000000000000000000000000096
-:10FA70000000000000000000000000000000000086
-:10FA80000000000000000000000000000000000076
-:10FA90000000000000000000000000000000000066
-:10FAA0000000000000000000000000000000000056
-:10FAB0000000000000000000000000000000000046
-:10FAC0000000000000000000000000000000000036
-:10FAD0000000000000000000000000000000000026
-:10FAE0000000000000000000000000000000000016
-:10FAF0000000000000000000000000000000000006
-:10FB000000000000000000000000000000000000F5
-:10FB100000000000000000000000000000000000E5
-:10FB200000000000000000000000000000000000D5
-:10FB300000000000000000000000000000000000C5
-:10FB400000000000000000000000000000000000B5
-:10FB500000000000000000000000000000000000A5
-:10FB60000000000000000000000000000000000095
-:10FB70000000000000000000000000000000000085
-:10FB80000000000000000000000000000000000075
-:10FB90000000000000000000000000000000000065
-:10FBA0000000000000000000000000000000000055
-:10FBB0000000000000000000000000000000000045
-:10FBC0000000000000000000000000000000000035
-:10FBD0000000000000000000000000000000000025
-:10FBE0000000000000000000000000000000000015
-:10FBF0000000000000000000000000000000000005
-:10F8000055AA0DF0F800E808A8A8AC28ECACC80888
-:10F81000A828A8A848A88808284808E828C828A828
-:10F8200008C828C828A80CC80C0C0C0C0808080824
-:10F830000C0C0C0C080C0808080810102020C02024
-:10F840002040804000000000000000008080808098
-:10F850008080808080808080808080808180158210
-:10F86000542A00801F0020202F202F282020252010
-:10F870002A2A2A2A27282120282F202F2827282B08
-:10F8800020272827282B2027202020202020202048
-:10F8900020202020202020204020404040401F20C9
-:10F8A0002010081005050505050505050908090AC4
-:10F8B000090A090A080A08080808080808080508C3
-:10F8C000020500020000000000000000000000002F
-:10F8D0000000000000000000000000000000000028
-:10F8E0000000000000000000000000000000000018
-:10F8F0000000000000000000000000000000000008
-:10F9000000000000000000000000000000000000F7
-:10F9100000000000000000000000000000000000E7
-:10F9200000000000000000000000000000000000D7
-:10F9300000000000000000000000000000000000C7
-:10F9400000000000000000000000000000000000B7
-:10F9500000000000000000000000000000000000A7
-:10F960000000000000000000000000000000000097
-:10F970000000000000000000000000000000000087
-:10F980000000000000000000000000000000000077
-:10F990000000000000000000000000000000000067
-:10F9A0000000000000000000000000000000000057
-:10F9B0000000000000000000000000000000000047
-:10F9C0000000000000000000000000000000000037
-:10F9D0000000000000000000000000000000000027
-:10F9E0000000000000000000000000000000000017
-:10F9F0000000000000000000000000000000000007
-:10FA000000000000000000000000000000000000F6
-:10FA100000000000000000000000000000000000E6
-:10FA200000000000000000000000000000000000D6
-:10FA300000000000000000000000000000000000C6
-:10FA400000000000000000000000000000000000B6
-:10FA500000000000000000000000000000000000A6
-:10FA60000000000000000000000000000000000096
-:10FA70000000000000000000000000000000000086
-:10FA80000000000000000000000000000000000076
-:10FA90000000000000000000000000000000000066
-:10FAA0000000000000000000000000000000000056
-:10FAB0000000000000000000000000000000000046
-:10FAC0000000000000000000000000000000000036
-:10FAD0000000000000000000000000000000000026
-:10FAE0000000000000000000000000000000000016
-:10FAF0000000000000000000000000000000000006
-:10FB000000000000000000000000000000000000F5
-:10FB100000000000000000000000000000000000E5
-:10FB200000000000000000000000000000000000D5
-:10FB300000000000000000000000000000000000C5
-:10FB400000000000000000000000000000000000B5
-:10FB500000000000000000000000000000000000A5
-:10FB60000000000000000000000000000000000095
-:10FB70000000000000000000000000000000000085
-:10FB80000000000000000000000000000000000075
-:10FB90000000000000000000000000000000000065
-:10FBA0000000000000000000000000000000000055
-:10FBB0000000000000000000000000000000000045
-:10FBC0000000000000000000000000000000000035
-:10FBD0000000000000000000000000000000000025
-:10FBE0000000000000000000000000000000000015
-:10FBF0000000000000000000000000000000000005
-:00000001FF

Bootup Logo/Logos/001_TS80.hex

@@ -1,258 +0,0 @@
-:020000040800F2
-:10F8000055AA0DF07FFFD5AB7DEA7F7E7F7FFF7F1E
-:10F81000FFFFFFFFFFFFFFFFFFFFFFFFFFFF7FFF78
-:10F820007F7FBFBFDFBFEFDF0FEFEF0FAFAFAFAF38
-:10F83000EFEFAFAFAFAFAFAF0FEF6FEFAFAFAFAFB8
-:10F84000AFAF2FAFAFAFAFAFAFAF6FAF6FEFAFAF88
-:10F85000AFAFAFAFAFAFAFAFAFAFAFAFAFAFAFAFB8
-:10F86000EF6FFF1FFDFFFAFDF7FAF7F7F7F7FAF76B
-:10F87000FAFAFAFAFAFAFAFAFAFAFAFAFAFAF0FAF2
-:10F88000F7F7EFEFDFEFBFDF80BFBF80AAAAAAAA1A
-:10F89000BFBFAAAAAAAAAAAA80BFB0BFADAFAAAA90
-:10F8A000ADAFA2AAADAAAAAFADAAB0AFB0BFAFAF7D
-:10F8B000AFAFAFAFAFAFAFAFAFAFAFAFAFAFAFAF58
-:10F8C000BFB0FFC00000000000000000000000000A
-:10F8D0000000000000000000000000000000000028
-:10F8E0000000000000000000000000000000000018
-:10F8F0000000000000000000000000000000000008
-:10F9000000000000000000000000000000000000F7
-:10F9100000000000000000000000000000000000E7
-:10F9200000000000000000000000000000000000D7
-:10F9300000000000000000000000000000000000C7
-:10F9400000000000000000000000000000000000B7
-:10F9500000000000000000000000000000000000A7
-:10F960000000000000000000000000000000000097
-:10F970000000000000000000000000000000000087
-:10F980000000000000000000000000000000000077
-:10F990000000000000000000000000000000000067
-:10F9A0000000000000000000000000000000000057
-:10F9B0000000000000000000000000000000000047
-:10F9C0000000000000000000000000000000000037
-:10F9D0000000000000000000000000000000000027
-:10F9E0000000000000000000000000000000000017
-:10F9F0000000000000000000000000000000000007
-:10FA000000000000000000000000000000000000F6
-:10FA100000000000000000000000000000000000E6
-:10FA200000000000000000000000000000000000D6
-:10FA300000000000000000000000000000000000C6
-:10FA400000000000000000000000000000000000B6
-:10FA500000000000000000000000000000000000A6
-:10FA60000000000000000000000000000000000096
-:10FA70000000000000000000000000000000000086
-:10FA80000000000000000000000000000000000076
-:10FA90000000000000000000000000000000000066
-:10FAA0000000000000000000000000000000000056
-:10FAB0000000000000000000000000000000000046
-:10FAC0000000000000000000000000000000000036
-:10FAD0000000000000000000000000000000000026
-:10FAE0000000000000000000000000000000000016
-:10FAF0000000000000000000000000000000000006
-:10FB000000000000000000000000000000000000F5
-:10FB100000000000000000000000000000000000E5
-:10FB200000000000000000000000000000000000D5
-:10FB300000000000000000000000000000000000C5
-:10FB400000000000000000000000000000000000B5
-:10FB500000000000000000000000000000000000A5
-:10FB60000000000000000000000000000000000095
-:10FB70000000000000000000000000000000000085
-:10FB80000000000000000000000000000000000075
-:10FB90000000000000000000000000000000000065
-:10FBA0000000000000000000000000000000000055
-:10FBB0000000000000000000000000000000000045
-:10FBC0000000000000000000000000000000000035
-:10FBD0000000000000000000000000000000000025
-:10FBE0000000000000000000000000000000000015
-:10FBF0000000000000000000000000000000000005
-:10F8000055AA0DF07FFFD5AB7DEA7F7E7F7FFF7F1E
-:10F81000FFFFFFFFFFFFFFFFFFFFFFFFFFFF7FFF78
-:10F820007F7FBFBFDFBFEFDF0FEFEF0FAFAFAFAF38
-:10F83000EFEFAFAFAFAFAFAF0FEF6FEFAFAFAFAFB8
-:10F84000AFAF2FAFAFAFAFAFAFAF6FAF6FEFAFAF88
-:10F85000AFAFAFAFAFAFAFAFAFAFAFAFAFAFAFAFB8
-:10F86000EF6FFF1FFDFFFAFDF7FAF7F7F7F7FAF76B
-:10F87000FAFAFAFAFAFAFAFAFAFAFAFAFAFAF0FAF2
-:10F88000F7F7EFEFDFEFBFDF80BFBF80AAAAAAAA1A
-:10F89000BFBFAAAAAAAAAAAA80BFB0BFADAFAAAA90
-:10F8A000ADAFA2AAADAAAAAFADAAB0AFB0BFAFAF7D
-:10F8B000AFAFAFAFAFAFAFAFAFAFAFAFAFAFAFAF58
-:10F8C000BFB0FFC00000000000000000000000000A
-:10F8D0000000000000000000000000000000000028
-:10F8E0000000000000000000000000000000000018
-:10F8F0000000000000000000000000000000000008
-:10F9000000000000000000000000000000000000F7
-:10F9100000000000000000000000000000000000E7
-:10F9200000000000000000000000000000000000D7
-:10F9300000000000000000000000000000000000C7
-:10F9400000000000000000000000000000000000B7
-:10F9500000000000000000000000000000000000A7
-:10F960000000000000000000000000000000000097
-:10F970000000000000000000000000000000000087
-:10F980000000000000000000000000000000000077
-:10F990000000000000000000000000000000000067
-:10F9A0000000000000000000000000000000000057
-:10F9B0000000000000000000000000000000000047
-:10F9C0000000000000000000000000000000000037
-:10F9D0000000000000000000000000000000000027
-:10F9E0000000000000000000000000000000000017
-:10F9F0000000000000000000000000000000000007
-:10FA000000000000000000000000000000000000F6
-:10FA100000000000000000000000000000000000E6
-:10FA200000000000000000000000000000000000D6
-:10FA300000000000000000000000000000000000C6
-:10FA400000000000000000000000000000000000B6
-:10FA500000000000000000000000000000000000A6
-:10FA60000000000000000000000000000000000096
-:10FA70000000000000000000000000000000000086
-:10FA80000000000000000000000000000000000076
-:10FA90000000000000000000000000000000000066
-:10FAA0000000000000000000000000000000000056
-:10FAB0000000000000000000000000000000000046
-:10FAC0000000000000000000000000000000000036
-:10FAD0000000000000000000000000000000000026
-:10FAE0000000000000000000000000000000000016
-:10FAF0000000000000000000000000000000000006
-:10FB000000000000000000000000000000000000F5
-:10FB100000000000000000000000000000000000E5
-:10FB200000000000000000000000000000000000D5
-:10FB300000000000000000000000000000000000C5
-:10FB400000000000000000000000000000000000B5
-:10FB500000000000000000000000000000000000A5
-:10FB60000000000000000000000000000000000095
-:10FB70000000000000000000000000000000000085
-:10FB80000000000000000000000000000000000075
-:10FB90000000000000000000000000000000000065
-:10FBA0000000000000000000000000000000000055
-:10FBB0000000000000000000000000000000000045
-:10FBC0000000000000000000000000000000000035
-:10FBD0000000000000000000000000000000000025
-:10FBE0000000000000000000000000000000000015
-:10FBF0000000000000000000000000000000000005
-:10F8000055AA0DF07FFFD5AB7DEA7F7E7F7FFF7F1E
-:10F81000FFFFFFFFFFFFFFFFFFFFFFFFFFFF7FFF78
-:10F820007F7FBFBFDFBFEFDF0FEFEF0FAFAFAFAF38
-:10F83000EFEFAFAFAFAFAFAF0FEF6FEFAFAFAFAFB8
-:10F84000AFAF2FAFAFAFAFAFAFAF6FAF6FEFAFAF88
-:10F85000AFAFAFAFAFAFAFAFAFAFAFAFAFAFAFAFB8
-:10F86000EF6FFF1FFDFFFAFDF7FAF7F7F7F7FAF76B
-:10F87000FAFAFAFAFAFAFAFAFAFAFAFAFAFAF0FAF2
-:10F88000F7F7EFEFDFEFBFDF80BFBF80AAAAAAAA1A
-:10F89000BFBFAAAAAAAAAAAA80BFB0BFADAFAAAA90
-:10F8A000ADAFA2AAADAAAAAFADAAB0AFB0BFAFAF7D
-:10F8B000AFAFAFAFAFAFAFAFAFAFAFAFAFAFAFAF58
-:10F8C000BFB0FFC00000000000000000000000000A
-:10F8D0000000000000000000000000000000000028
-:10F8E0000000000000000000000000000000000018
-:10F8F0000000000000000000000000000000000008
-:10F9000000000000000000000000000000000000F7
-:10F9100000000000000000000000000000000000E7
-:10F9200000000000000000000000000000000000D7
-:10F9300000000000000000000000000000000000C7
-:10F9400000000000000000000000000000000000B7
-:10F9500000000000000000000000000000000000A7
-:10F960000000000000000000000000000000000097
-:10F970000000000000000000000000000000000087
-:10F980000000000000000000000000000000000077
-:10F990000000000000000000000000000000000067
-:10F9A0000000000000000000000000000000000057
-:10F9B0000000000000000000000000000000000047
-:10F9C0000000000000000000000000000000000037
-:10F9D0000000000000000000000000000000000027
-:10F9E0000000000000000000000000000000000017
-:10F9F0000000000000000000000000000000000007
-:10FA000000000000000000000000000000000000F6
-:10FA100000000000000000000000000000000000E6
-:10FA200000000000000000000000000000000000D6
-:10FA300000000000000000000000000000000000C6
-:10FA400000000000000000000000000000000000B6
-:10FA500000000000000000000000000000000000A6
-:10FA60000000000000000000000000000000000096
-:10FA70000000000000000000000000000000000086
-:10FA80000000000000000000000000000000000076
-:10FA90000000000000000000000000000000000066
-:10FAA0000000000000000000000000000000000056
-:10FAB0000000000000000000000000000000000046
-:10FAC0000000000000000000000000000000000036
-:10FAD0000000000000000000000000000000000026
-:10FAE0000000000000000000000000000000000016
-:10FAF0000000000000000000000000000000000006
-:10FB000000000000000000000000000000000000F5
-:10FB100000000000000000000000000000000000E5
-:10FB200000000000000000000000000000000000D5
-:10FB300000000000000000000000000000000000C5
-:10FB400000000000000000000000000000000000B5
-:10FB500000000000000000000000000000000000A5
-:10FB60000000000000000000000000000000000095
-:10FB70000000000000000000000000000000000085
-:10FB80000000000000000000000000000000000075
-:10FB90000000000000000000000000000000000065
-:10FBA0000000000000000000000000000000000055
-:10FBB0000000000000000000000000000000000045
-:10FBC0000000000000000000000000000000000035
-:10FBD0000000000000000000000000000000000025
-:10FBE0000000000000000000000000000000000015
-:10FBF0000000000000000000000000000000000005
-:10F8000055AA0DF07FFFD5AB7DEA7F7E7F7FFF7F1E
-:10F81000FFFFFFFFFFFFFFFFFFFFFFFFFFFF7FFF78
-:10F820007F7FBFBFDFBFEFDF0FEFEF0FAFAFAFAF38
-:10F83000EFEFAFAFAFAFAFAF0FEF6FEFAFAFAFAFB8
-:10F84000AFAF2FAFAFAFAFAFAFAF6FAF6FEFAFAF88
-:10F85000AFAFAFAFAFAFAFAFAFAFAFAFAFAFAFAFB8
-:10F86000EF6FFF1FFDFFFAFDF7FAF7F7F7F7FAF76B
-:10F87000FAFAFAFAFAFAFAFAFAFAFAFAFAFAF0FAF2
-:10F88000F7F7EFEFDFEFBFDF80BFBF80AAAAAAAA1A
-:10F89000BFBFAAAAAAAAAAAA80BFB0BFADAFAAAA90
-:10F8A000ADAFA2AAADAAAAAFADAAB0AFB0BFAFAF7D
-:10F8B000AFAFAFAFAFAFAFAFAFAFAFAFAFAFAFAF58
-:10F8C000BFB0FFC00000000000000000000000000A
-:10F8D0000000000000000000000000000000000028
-:10F8E0000000000000000000000000000000000018
-:10F8F0000000000000000000000000000000000008
-:10F9000000000000000000000000000000000000F7
-:10F9100000000000000000000000000000000000E7
-:10F9200000000000000000000000000000000000D7
-:10F9300000000000000000000000000000000000C7
-:10F9400000000000000000000000000000000000B7
-:10F9500000000000000000000000000000000000A7
-:10F960000000000000000000000000000000000097
-:10F970000000000000000000000000000000000087
-:10F980000000000000000000000000000000000077
-:10F990000000000000000000000000000000000067
-:10F9A0000000000000000000000000000000000057
-:10F9B0000000000000000000000000000000000047
-:10F9C0000000000000000000000000000000000037
-:10F9D0000000000000000000000000000000000027
-:10F9E0000000000000000000000000000000000017
-:10F9F0000000000000000000000000000000000007
-:10FA000000000000000000000000000000000000F6
-:10FA100000000000000000000000000000000000E6
-:10FA200000000000000000000000000000000000D6
-:10FA300000000000000000000000000000000000C6
-:10FA400000000000000000000000000000000000B6
-:10FA500000000000000000000000000000000000A6
-:10FA60000000000000000000000000000000000096
-:10FA70000000000000000000000000000000000086
-:10FA80000000000000000000000000000000000076
-:10FA90000000000000000000000000000000000066
-:10FAA0000000000000000000000000000000000056
-:10FAB0000000000000000000000000000000000046
-:10FAC0000000000000000000000000000000000036
-:10FAD0000000000000000000000000000000000026
-:10FAE0000000000000000000000000000000000016
-:10FAF0000000000000000000000000000000000006
-:10FB000000000000000000000000000000000000F5
-:10FB100000000000000000000000000000000000E5
-:10FB200000000000000000000000000000000000D5
-:10FB300000000000000000000000000000000000C5
-:10FB400000000000000000000000000000000000B5
-:10FB500000000000000000000000000000000000A5
-:10FB60000000000000000000000000000000000095
-:10FB70000000000000000000000000000000000085
-:10FB80000000000000000000000000000000000075
-:10FB90000000000000000000000000000000000065
-:10FBA0000000000000000000000000000000000055
-:10FBB0000000000000000000000000000000000045
-:10FBC0000000000000000000000000000000000035
-:10FBD0000000000000000000000000000000000025
-:10FBE0000000000000000000000000000000000015
-:10FBF0000000000000000000000000000000000005
-:00000001FF

Bootup Logo/Logos/_clear_logo.hex

@@ -1,258 +0,0 @@
-:020000040800F2
-:10F8000000000000000000000000000000000000F8
-:10F8100000000000000000000000000000000000E8
-:10F8200000000000000000000000000000000000D8
-:10F8300000000000000000000000000000000000C8
-:10F8400000000000000000000000000000000000B8
-:10F8500000000000000000000000000000000000A8
-:10F860000000000000000000000000000000000098
-:10F870000000000000000000000000000000000088
-:10F880000000000000000000000000000000000078
-:10F890000000000000000000000000000000000068
-:10F8A0000000000000000000000000000000000058
-:10F8B0000000000000000000000000000000000048
-:10F8C0000000000000000000000000000000000038
-:10F8D0000000000000000000000000000000000028
-:10F8E0000000000000000000000000000000000018
-:10F8F0000000000000000000000000000000000008
-:10F9000000000000000000000000000000000000F7
-:10F9100000000000000000000000000000000000E7
-:10F9200000000000000000000000000000000000D7
-:10F9300000000000000000000000000000000000C7
-:10F9400000000000000000000000000000000000B7
-:10F9500000000000000000000000000000000000A7
-:10F960000000000000000000000000000000000097
-:10F970000000000000000000000000000000000087
-:10F980000000000000000000000000000000000077
-:10F990000000000000000000000000000000000067
-:10F9A0000000000000000000000000000000000057
-:10F9B0000000000000000000000000000000000047
-:10F9C0000000000000000000000000000000000037
-:10F9D0000000000000000000000000000000000027
-:10F9E0000000000000000000000000000000000017
-:10F9F0000000000000000000000000000000000007
-:10FA000000000000000000000000000000000000F6
-:10FA100000000000000000000000000000000000E6
-:10FA200000000000000000000000000000000000D6
-:10FA300000000000000000000000000000000000C6
-:10FA400000000000000000000000000000000000B6
-:10FA500000000000000000000000000000000000A6
-:10FA60000000000000000000000000000000000096
-:10FA70000000000000000000000000000000000086
-:10FA80000000000000000000000000000000000076
-:10FA90000000000000000000000000000000000066
-:10FAA0000000000000000000000000000000000056
-:10FAB0000000000000000000000000000000000046
-:10FAC0000000000000000000000000000000000036
-:10FAD0000000000000000000000000000000000026
-:10FAE0000000000000000000000000000000000016
-:10FAF0000000000000000000000000000000000006
-:10FB000000000000000000000000000000000000F5
-:10FB100000000000000000000000000000000000E5
-:10FB200000000000000000000000000000000000D5
-:10FB300000000000000000000000000000000000C5
-:10FB400000000000000000000000000000000000B5
-:10FB500000000000000000000000000000000000A5
-:10FB60000000000000000000000000000000000095
-:10FB70000000000000000000000000000000000085
-:10FB80000000000000000000000000000000000075
-:10FB90000000000000000000000000000000000065
-:10FBA0000000000000000000000000000000000055
-:10FBB0000000000000000000000000000000000045
-:10FBC0000000000000000000000000000000000035
-:10FBD0000000000000000000000000000000000025
-:10FBE0000000000000000000000000000000000015
-:10FBF0000000000000000000000000000000000005
-:10F8000000000000000000000000000000000000F8
-:10F8100000000000000000000000000000000000E8
-:10F8200000000000000000000000000000000000D8
-:10F8300000000000000000000000000000000000C8
-:10F8400000000000000000000000000000000000B8
-:10F8500000000000000000000000000000000000A8
-:10F860000000000000000000000000000000000098
-:10F870000000000000000000000000000000000088
-:10F880000000000000000000000000000000000078
-:10F890000000000000000000000000000000000068
-:10F8A0000000000000000000000000000000000058
-:10F8B0000000000000000000000000000000000048
-:10F8C0000000000000000000000000000000000038
-:10F8D0000000000000000000000000000000000028
-:10F8E0000000000000000000000000000000000018
-:10F8F0000000000000000000000000000000000008
-:10F9000000000000000000000000000000000000F7
-:10F9100000000000000000000000000000000000E7
-:10F9200000000000000000000000000000000000D7
-:10F9300000000000000000000000000000000000C7
-:10F9400000000000000000000000000000000000B7
-:10F9500000000000000000000000000000000000A7
-:10F960000000000000000000000000000000000097
-:10F970000000000000000000000000000000000087
-:10F980000000000000000000000000000000000077
-:10F990000000000000000000000000000000000067
-:10F9A0000000000000000000000000000000000057
-:10F9B0000000000000000000000000000000000047
-:10F9C0000000000000000000000000000000000037
-:10F9D0000000000000000000000000000000000027
-:10F9E0000000000000000000000000000000000017
-:10F9F0000000000000000000000000000000000007
-:10FA000000000000000000000000000000000000F6
-:10FA100000000000000000000000000000000000E6
-:10FA200000000000000000000000000000000000D6
-:10FA300000000000000000000000000000000000C6
-:10FA400000000000000000000000000000000000B6
-:10FA500000000000000000000000000000000000A6
-:10FA60000000000000000000000000000000000096
-:10FA70000000000000000000000000000000000086
-:10FA80000000000000000000000000000000000076
-:10FA90000000000000000000000000000000000066
-:10FAA0000000000000000000000000000000000056
-:10FAB0000000000000000000000000000000000046
-:10FAC0000000000000000000000000000000000036
-:10FAD0000000000000000000000000000000000026
-:10FAE0000000000000000000000000000000000016
-:10FAF0000000000000000000000000000000000006
-:10FB000000000000000000000000000000000000F5
-:10FB100000000000000000000000000000000000E5
-:10FB200000000000000000000000000000000000D5
-:10FB300000000000000000000000000000000000C5
-:10FB400000000000000000000000000000000000B5
-:10FB500000000000000000000000000000000000A5
-:10FB60000000000000000000000000000000000095
-:10FB70000000000000000000000000000000000085
-:10FB80000000000000000000000000000000000075
-:10FB90000000000000000000000000000000000065
-:10FBA0000000000000000000000000000000000055
-:10FBB0000000000000000000000000000000000045
-:10FBC0000000000000000000000000000000000035
-:10FBD0000000000000000000000000000000000025
-:10FBE0000000000000000000000000000000000015
-:10FBF0000000000000000000000000000000000005
-:10F8000000000000000000000000000000000000F8
-:10F8100000000000000000000000000000000000E8
-:10F8200000000000000000000000000000000000D8
-:10F8300000000000000000000000000000000000C8
-:10F8400000000000000000000000000000000000B8
-:10F8500000000000000000000000000000000000A8
-:10F860000000000000000000000000000000000098
-:10F870000000000000000000000000000000000088
-:10F880000000000000000000000000000000000078
-:10F890000000000000000000000000000000000068
-:10F8A0000000000000000000000000000000000058
-:10F8B0000000000000000000000000000000000048
-:10F8C0000000000000000000000000000000000038
-:10F8D0000000000000000000000000000000000028
-:10F8E0000000000000000000000000000000000018
-:10F8F0000000000000000000000000000000000008
-:10F9000000000000000000000000000000000000F7
-:10F9100000000000000000000000000000000000E7
-:10F9200000000000000000000000000000000000D7
-:10F9300000000000000000000000000000000000C7
-:10F9400000000000000000000000000000000000B7
-:10F9500000000000000000000000000000000000A7
-:10F960000000000000000000000000000000000097
-:10F970000000000000000000000000000000000087
-:10F980000000000000000000000000000000000077
-:10F990000000000000000000000000000000000067
-:10F9A0000000000000000000000000000000000057
-:10F9B0000000000000000000000000000000000047
-:10F9C0000000000000000000000000000000000037
-:10F9D0000000000000000000000000000000000027
-:10F9E0000000000000000000000000000000000017
-:10F9F0000000000000000000000000000000000007
-:10FA000000000000000000000000000000000000F6
-:10FA100000000000000000000000000000000000E6
-:10FA200000000000000000000000000000000000D6
-:10FA300000000000000000000000000000000000C6
-:10FA400000000000000000000000000000000000B6
-:10FA500000000000000000000000000000000000A6
-:10FA60000000000000000000000000000000000096
-:10FA70000000000000000000000000000000000086
-:10FA80000000000000000000000000000000000076
-:10FA90000000000000000000000000000000000066
-:10FAA0000000000000000000000000000000000056
-:10FAB0000000000000000000000000000000000046
-:10FAC0000000000000000000000000000000000036
-:10FAD0000000000000000000000000000000000026
-:10FAE0000000000000000000000000000000000016
-:10FAF0000000000000000000000000000000000006
-:10FB000000000000000000000000000000000000F5
-:10FB100000000000000000000000000000000000E5
-:10FB200000000000000000000000000000000000D5
-:10FB300000000000000000000000000000000000C5
-:10FB400000000000000000000000000000000000B5
-:10FB500000000000000000000000000000000000A5
-:10FB60000000000000000000000000000000000095
-:10FB70000000000000000000000000000000000085
-:10FB80000000000000000000000000000000000075
-:10FB90000000000000000000000000000000000065
-:10FBA0000000000000000000000000000000000055
-:10FBB0000000000000000000000000000000000045
-:10FBC0000000000000000000000000000000000035
-:10FBD0000000000000000000000000000000000025
-:10FBE0000000000000000000000000000000000015
-:10FBF0000000000000000000000000000000000005
-:10F8000000000000000000000000000000000000F8
-:10F8100000000000000000000000000000000000E8
-:10F8200000000000000000000000000000000000D8
-:10F8300000000000000000000000000000000000C8
-:10F8400000000000000000000000000000000000B8
-:10F8500000000000000000000000000000000000A8
-:10F860000000000000000000000000000000000098
-:10F870000000000000000000000000000000000088
-:10F880000000000000000000000000000000000078
-:10F890000000000000000000000000000000000068
-:10F8A0000000000000000000000000000000000058
-:10F8B0000000000000000000000000000000000048
-:10F8C0000000000000000000000000000000000038
-:10F8D0000000000000000000000000000000000028
-:10F8E0000000000000000000000000000000000018
-:10F8F0000000000000000000000000000000000008
-:10F9000000000000000000000000000000000000F7
-:10F9100000000000000000000000000000000000E7
-:10F9200000000000000000000000000000000000D7
-:10F9300000000000000000000000000000000000C7
-:10F9400000000000000000000000000000000000B7
-:10F9500000000000000000000000000000000000A7
-:10F960000000000000000000000000000000000097
-:10F970000000000000000000000000000000000087
-:10F980000000000000000000000000000000000077
-:10F990000000000000000000000000000000000067
-:10F9A0000000000000000000000000000000000057
-:10F9B0000000000000000000000000000000000047
-:10F9C0000000000000000000000000000000000037
-:10F9D0000000000000000000000000000000000027
-:10F9E0000000000000000000000000000000000017
-:10F9F0000000000000000000000000000000000007
-:10FA000000000000000000000000000000000000F6
-:10FA100000000000000000000000000000000000E6
-:10FA200000000000000000000000000000000000D6
-:10FA300000000000000000000000000000000000C6
-:10FA400000000000000000000000000000000000B6
-:10FA500000000000000000000000000000000000A6
-:10FA60000000000000000000000000000000000096
-:10FA70000000000000000000000000000000000086
-:10FA80000000000000000000000000000000000076
-:10FA90000000000000000000000000000000000066
-:10FAA0000000000000000000000000000000000056
-:10FAB0000000000000000000000000000000000046
-:10FAC0000000000000000000000000000000000036
-:10FAD0000000000000000000000000000000000026
-:10FAE0000000000000000000000000000000000016
-:10FAF0000000000000000000000000000000000006
-:10FB000000000000000000000000000000000000F5
-:10FB100000000000000000000000000000000000E5
-:10FB200000000000000000000000000000000000D5
-:10FB300000000000000000000000000000000000C5
-:10FB400000000000000000000000000000000000B5
-:10FB500000000000000000000000000000000000A5
-:10FB60000000000000000000000000000000000095
-:10FB70000000000000000000000000000000000085
-:10FB80000000000000000000000000000000000075
-:10FB90000000000000000000000000000000000065
-:10FBA0000000000000000000000000000000000055
-:10FBB0000000000000000000000000000000000045
-:10FBC0000000000000000000000000000000000035
-:10FBD0000000000000000000000000000000000025
-:10FBE0000000000000000000000000000000000015
-:10FBF0000000000000000000000000000000000005
-:00000001FF

Bootup Logo/python_logo_converter/img2ts100.py

@@ -1,241 +0,0 @@
-#!/usr/bin/env python
-# coding=utf-8
-from __future__ import division
-import os
-import sys
-
-
-try:
-    from PIL import Image, ImageOps
-except ImportError as error:
-    raise ImportError("{}: {} requres Python Imaging Library (PIL). "
-                      "Install with `pip` or OS-specific package "
-                      "management tool."
-                      .format(error, sys.argv[0]))
-
-VERSION_STRING = '0.01'
-
-LCD_WIDTH       = 96
-LCD_HEIGHT      = 16
-LCD_NUM_BYTES   = LCD_WIDTH * LCD_HEIGHT // 8
-LCD_PADDED_SIZE = 1024
-
-INTELHEX_DATA_RECORD                    = 0x00
-INTELHEX_END_OF_FILE_RECORD             = 0x01
-INTELHEX_EXTENDED_LINEAR_ADDRESS_RECORD = 0x04
-INTELHEX_BYTES_PER_LINE                 = 16
-INTELHEX_MINIMUM_SIZE                   = 4096
-
-
-def split16(word):
-    """return high and low byte of 16-bit word value as tuple"""
-    return (word >> 8) & 0xff, word & 0xff
-
-
-def intel_hex_line(record_type, offset, data):
-    """generate a line of data in Intel hex format"""
-    # length, address offset, record type
-    record_length = len(data)
-    yield ':{:02X}{:04X}{:02X}'.format(record_length, offset, record_type)
-
-    # data
-    for byte in data:
-        yield "{:02X}".format(byte)
-
-    # compute and write checksum (now using unix style line endings for DFU3.45 compatibility
-    yield "{:02X}\n".format((((sum(data,                   # sum data ...
-                                     record_length           # ... and other ...
-                                     + sum(split16(offset))  # ... fields ...
-                                     + record_type)          # ... on line
-                                 & 0xff)                     # low 8 bits
-                                ^ 0xff)                      # two's ...
-                               + 1)                          # ... complement
-                              & 0xff)                        # low 8 bits
-
-
-def intel_hex(file, bytes_, start_address=0x0):
-    """write block of data in Intel hex format"""
-    def write(generator):
-        file.write(''.join(generator))
-
-    if len(bytes_) % INTELHEX_BYTES_PER_LINE != 0:
-        raise ValueError("Program error: Size of LCD data is not evenly divisible by {}"
-                         .format(INTELHEX_BYTES_PER_LINE))
-
-    address_lo =  start_address        & 0xffff
-    address_hi = (start_address >> 16) & 0xffff
-
-    write(intel_hex_line(INTELHEX_EXTENDED_LINEAR_ADDRESS_RECORD, 0,
-                               split16(address_hi)))
-
-    size_written = 0
-    while size_written < INTELHEX_MINIMUM_SIZE:
-        offset = address_lo
-        for line_start in range(0, len(bytes_), INTELHEX_BYTES_PER_LINE):
-            write(intel_hex_line(INTELHEX_DATA_RECORD, offset,
-                                 bytes_[line_start:line_start + INTELHEX_BYTES_PER_LINE]))
-            size_written += INTELHEX_BYTES_PER_LINE
-            if size_written >= INTELHEX_MINIMUM_SIZE:
-                break
-            offset += INTELHEX_BYTES_PER_LINE
-
-    write(intel_hex_line(INTELHEX_END_OF_FILE_RECORD, 0, ()))
-
-
-def img2hex(input_filename,
-            output_file,
-            preview_filename=None,
-            threshold=128,
-            dither=False,
-            negative=False):
-    """
-    Convert 'input_filename' image file into Intel hex format with data
-        formatted for display on TS100 LCD and file object.
-    Input image is converted from color or grayscale to black-and-white,
-        and resized to fit TS100 LCD screen as necessary.
-    Optionally write resized/thresholded/black-and-white preview image
-        to file specified by name.
-    Optional `threshold' argument 8 bit value; grayscale pixels greater than
-        this become 1 (white) in output, less than become 0 (black).
-    Unless optional `dither', in which case PIL grayscale-to-black/white
-        dithering algorithm used.
-    Optional `negative' inverts black/white regardless of input image type
-        or other options.
-    """
-
-    try:
-        image = Image.open(input_filename)
-    except BaseException as e:
-        raise IOError("error reading image file \"{}\": {}".format(input_filename, e))
-
-    # convert to luminance
-    # do even if already black/white because PIL can't invert 1-bit so
-    #   can't just pass thru in case --negative flag
-    # also resizing works better in luminance than black/white
-    # also no information loss converting black/white to grayscale
-    if image.mode != 'L':
-        image = image.convert('L')
-
-    if image.size != (LCD_WIDTH, LCD_HEIGHT):
-        image = image.resize((LCD_WIDTH, LCD_HEIGHT), Image.BICUBIC)
-
-    if negative:
-        image = ImageOps.invert(image)
-        threshold = 255 - threshold  # have to invert threshold
-
-    if dither:
-        image = image.convert('1')
-    else:
-        image = image.point(lambda pixel: 0 if pixel < threshold else 1, '1')
-
-    if preview_filename:
-        image.save(preview_filename)
-
-    ''' DEBUG
-    for row in range(LCD_HEIGHT):
-        for column in range(LCD_WIDTH):
-            if image.getpixel((column, row)): sys.stderr.write('1')
-            else:                             sys.stderr.write('0')
-        sys.stderr.write('\n')
-    '''
-
-    # pad to this size (also will be repeated in output Intel hex file)
-    data = [0] * LCD_PADDED_SIZE
-
-    # magic/undocumented/required header in endian-reverse byte order
-    data[0] = 0x55
-    data[1] = 0xAA
-    data[2] = 0x0D
-    data[3] = 0xF0
-
-    # convert to TS100 LCD format
-    for ndx in range(LCD_WIDTH * 16 // 8):
-        bottom_half_offset = 0 if ndx < LCD_WIDTH else 8
-        byte = 0
-        for y in range(8):
-            if image.getpixel((ndx % LCD_WIDTH, y + bottom_half_offset)):
-                byte |= 1 << y
-        # store in endian-reversed byte order
-        data[4 + ndx + (1 if ndx % 2 == 0 else -1)] = byte
-
-    intel_hex(output_file, data, 0x0800F800)
-
-
-def parse_commandline():
-    parser = argparse.ArgumentParser(
-                formatter_class=argparse.ArgumentDefaultsHelpFormatter,
-                description="Convert image file for display on TS100 LCD "
-                            "at startup")
-
-    def zero_to_255(text):
-        value = int(text)
-        if not 0 <= value <= 255:
-            raise argparse.ArgumentTypeError("must be integer from 0 to 255 ")
-        return value
-
-    parser.add_argument('input_filename',
-                        help="input image file")
-
-    parser.add_argument('output_filename',
-                        help="output Intel hex file")
-
-    parser.add_argument('-p', '--preview',
-                        help="filename of image preview (same data as "
-                             "Intel hex file, as will appear on TS100 LCD)")
-
-    parser.add_argument('-n', '--negative',
-                        action='store_true',
-                        help="photo negative: exchange black and white "
-                              "in output")
-
-    parser.add_argument('-t', '--threshold',
-                        type=zero_to_255,
-                        default=128,
-                        help="0 to 255: gray (or color converted to gray) "
-                             "above this becomes white, below becomes black; "
-                             "ignored if using --dither")
-
-    parser.add_argument('-d', '--dither',
-                        action='store_true',
-                        help="use dithering (speckling) to convert gray or "
-                             "color to black and white")
-
-    parser.add_argument('-f', '--force',
-                        action='store_true',
-                        help="force overwriting of existing files")
-
-    parser.add_argument('-v', '--version',
-                        action='version',
-                        version="%(prog)s version " + VERSION_STRING,
-                        help="print version info")
-
-    return parser.parse_args()
-
-
-if __name__ == "__main__":
-    import argparse
-    args = parse_commandline()
-
-    if os.path.exists(args.output_filename) and not args.force:
-        sys.stderr.write("Won't overwrite existing file \"{}\" (use --force "
-                         "option to override)\n"
-                         .format(args.output_filename))
-        sys.exit(1)
-
-    if args.preview and os.path.exists(args.preview) and not args.force:
-        sys.stderr.write("Won't overwrite existing file \"{}\" (use --force "
-                         "option to override)\n"
-                         .format(args.preview))
-        sys.exit(1)
-
-    try:
-        with open(args.output_filename, 'w', newline='\r\n') as output:
-            img2hex(args.input_filename,
-                    output,
-                    args.preview,
-                    args.threshold,
-                    args.dither,
-                    args.negative)
-    except BaseException as error:
-        sys.stderr.write("Error converting file: {}\n".format(error))
-        sys.exit(1)

Dockerfile

@@ -1,21 +0,0 @@
-FROM ubuntu:20.04
-LABEL maintainer="Ben V. Brown <ralim@ralimtek.com>"
-
-WORKDIR /build
-# Setup the ARM GCC toolchain
-
-# Install any needed packages specified in requirements.txt
-RUN apt-get update && \
-  apt-get install -y \
-  make \
-  bzip2 \
-  git \
-  python3 \
-  wget && \
-  apt-get clean
-RUN wget -qO- https://armkeil.blob.core.windows.net/developer/Files/downloads/gnu-rm/9-2020q2/gcc-arm-none-eabi-9-2020-q2-update-x86_64-linux.tar.bz2 | tar -xj
-
-# Add compiler to the path
-ENV PATH "/build/gcc-arm-none-eabi-9-2020-q2-update/bin:$PATH"
-COPY . /build/source
-COPY ./ci /build/ci

Documentation/Bluetooth.md

@@ -0,0 +1,99 @@
+# Bluetooth Low Energy
+
+The Pinecilv2 has hardware support for Bluetooth Low Energy (BLE). This protocol allows reading and writing of parameters to the Pinecil during runtime.
+
+The BLE interface advertises three services, these provide access to live telemetry as well as the ability to read/write settings.
+These are outlined in more detail below.
+
+Pinecil devices advertise themselves on BLE as `Pinecil-XXXXXXX`.
+They also include the UUID `9eae1000-9d0d-48c5-AA55-33e27f9bc533` in the advertisement packet to allow for filtering.
+
+Unless otherwise noted, all data is sent and received as Little-Endian.
+
+As of the time of writing this, notifications are not fully implemented so data will need to be polled. Notification/Indication support will come when there is time to implement it.
+
+## Using the BLE Interface
+
+It is advised to follow the below points when first implementing a BLE integration. Of course once the integration is working feel free to deviate from these. These are just _suggested_ ideas to help kickstart.
+
+1. When filtering for devices, its preferable to filter by the UUID `9eae1000-9d0d-48c5-AA55-33e27f9bc533`, rather than by the device name if possible.
+2. Upon first collection check if the three expected services exist; if they don't the user may have selected an incorrect device.
+3. It's best to read the live bulk endpoint over the live service when its easy to do so (one read vs ~15).
+   1. However if you are just updating one or two line items it may be more efficient to just read these on the live service.
+   2. Feel free to test both and decide.
+4. When reading settings from the device; the association of number <-> setting is fixed, but you may see settings you don't yet know about, make sure you can handle these.
+5. You probably don't want to show unknown setting's to the user though.
+6. Read the device firmware revision and ensure you can decode it. If BLE is revised it may be essential for handling versions cleanly.
+7. It's advisable to keep an eye on the IronOS repository or at least setup the Github watch for release notifications.
+   1. Future releases may revise some BLE aspects or add new settings for example.
+
+## Services
+
+Below is a description of each service. Note that the exact settings are not listed for brevity; it's best to refer to [the uuid lists](https://github.com/Ralim/IronOS/blob/dev/source/Core/BSP/Pinecilv2/ble_characteristics.h) and the [handlers](https://github.com/Ralim/IronOS/blob/dev/source/Core/BSP/Pinecilv2/ble_handlers.cpp) alongside this.
+
+### Live
+
+`UUID: d85ef000-168e-4a71-AA55-33e27f9bc533`
+
+The live services has one characteristic per reading. The readings (in order) are:
+When implementing these; the ones that are not obvious are generally found in the debugging menu. Values are encoded as an unsigned 32 bit number for all results.
+
+1. Live temperature (In C)
+2. Live set point
+3. DC input voltage
+4. Handle temperature (In C)
+5. Power level
+6. Power source
+7. Tip resistance
+8. uptime
+9. Time of last movement
+10. Maximum temperature settable
+11. Raw tip reading
+12. Hall sensor
+13. Operating mode
+14. Estimated wattage
+
+### Settings
+
+`UUID: f6d80000-5a10-4eba-AA55-33e27f9bc533`
+
+The settings service has two special entries; for saving and resetting settings.
+Otherwise all settings are enumerated using UUID's of the format : `f6d7ZZZZ-5a10-4eba-AA55-33e27f9bc533))` where `ZZZZ` is the setting number as matched from [Settings.h](https://github.com/Ralim/IronOS/blob/dev/source/Core/Inc/Settings.h#L16).
+
+All data is read and written in fixed unsigned 16 bit numbers.
+
+#### Settings save
+
+To save the settings write a `0x0001` to `f6d7FFFF-5a10-4eba-AA55-33e27f9bc533`.
+Its advised to not save settings on each change but instead to give the user a save button _or_ save after a timeout. This is just to reduce write cycles on the internal flash.
+
+#### Settings reset
+
+To reset all settings to defaults; write a `0x0001` to  `f6d7FFFE-5a10-4eba-AA55-33e27f9bc533`.
+This will reset settings immediately.
+
+### Bulk
+
+`UUID: 9eae1000-9d0d-48c5-AA55-33e27f9bc533`
+
+The bulk endpoint is where extra data is located with varying read sizes.
+
+#### Live data
+
+The bulk live data endpoint provides all of the data provided in the live endpoint, as one large single-read binary blob. This is designed for applications that are showing large amounts of data as this is more efficient for reading.
+
+#### Accelerometer Name
+
+_Not yet implemented_
+
+#### Build ID
+
+This encodes the current build ID to allow viewing and handling when the BLE format changes.
+
+#### Device Serial Number
+
+This is generally the device CPU serial number. For most devices this can be used as an ID. On PinecilV2 its the MAC address.
+
+#### Device Unique ID
+
+This is only relevant on the PinecilV2. This is a random ID that is burned in at the factory. This is used by the online authenticity checker tool.

Documentation/DebugMenu.md

@@ -0,0 +1,157 @@
+# Debugging Menu
+
+In this firmware there is extra debugging information in a hidden sub-menu.
+This menu is meant to be simple, so it has no fancy GUI animations.
+
+- Access it by pressing the rear button (`-/B`) on the iron while it is on the home screen.
+- Use the front button (`+/A`) to scroll through the menu.
+- To exit, use the rear button (`-/B`) again.
+
+## Menu items
+
+Items are shown in the menu on a single line, so they use short codes.
+
+### Version
+
+There is a static line on top which is presented on every sub-screen and reflects exact version of firmware. Version line on top has the following format - `vX.YYN.[ZZZZZZZZ]`:
+
+- X: major version
+- Y: minor version
+- N: build type:
+  - R - git-related **r**elease tag vXX.YY
+  - T - git-related release **t**ag but version is not vXX.YY !
+  - D - git-related **d**ev branch
+  - B - git-related custom **b**ranch
+  - E - git-related from d**e**tached commit
+  - G - neither above but **g**it-related
+  - C - build from github **C**I during _pull request_
+  - H - build outside of a git tree (i.e. release tarball or **h**omebrew customization without git)
+  - S - something **s**pecial[^ERR]
+  - V - something **v**ery special[^ERR]
+[^ERR]: `S` and `V` are reserved letters for cases when source of firmware is having very unique origin & configuration
+- Z: short commit ID hash with 8 digits generated automatically from git (for git-related build types only)
+
+I.e.:
+- `v2.22H` means firmware built locally from tarball with release version of `2.22`
+- `v2.22D.1A2B3C4D` means firmware with development version of `2.22` from git `dev` branch & with commit ID `1A2B3C4D` (so it can be traced for debug purposes)
+- `v2.22R.5E6F7G8H` means firmware with official release version of `2.22` and it's properly tagged with `v2.22` git tag & with commit ID `5E6F7G8H`'
+
+---
+
+**Additional scroll-able items appear in this order**:
+
+### Date
+
+- This is a date of firmware compilation and it has the following format: `DD-MM-YY` (i.e., `01-07-23` means it has been built in July, 1st, 2023)
+
+### ID
+
+- This is used by Irons that have an ID and serial number to help check if the iron is authentic. All Pinecil V1 show the same ID number as this is the number programmed into the MCU.
+- The new Pinecil V2 released Aug. 2, 2022 now uses MCU BL706, which enables generating a unique ID/Serial number to every iron. This can be used to verify your [Pinecil authenticity here](https://pinecil.pine64.org/).
+
+### ACC
+
+This indicates the accelerometer that is fitted inside the unit.
+
+- MMA8652
+- LIS2DH12
+- BMA223
+- MSA301
+- SC7A20
+- None -> running in fallback without movement detection
+- Scanning -> Still searching I2C for one
+
+### PWR
+
+This indicates the current power source for the iron.
+This may change during power up as the sources are negotiated in turn.
+
+- **DC** input (dumb)
+- **QC** input (We used QC2/3 negotiation for current supply)
+- **PD W. VBus** input (PD subsystem is used to negotiate for current supply); and VBus is connected to your input power source
+- **PD No VBus** input (PD subsystem is used to negotiate for current supply); and VBus is **NOT** connected to your input power source. If it is Not required or possible to do a special mod of your PCB (i.e. late model V1, some early Green PCB models) then [PD No VBus] displays on-screen ([see details and PD Debug section below](https://ralim.github.io/IronOS/DebugMenu/#pd-debug-menu)).
+
+### Vin
+
+The input voltage as read by the internal ADC. Can be used to sanity check it is being read correctly.
+
+### Tip C
+
+This is the tip temperature in °C.
+This can be used with RTip for assessing temperature processing performance.
+
+### Han C
+
+This is the handle temperature or more accurately the reading of the Cold Junction Compensation (CJC) temperature sensor. This is expressed in °C. Range of 20-40 °C is normal depending on how hot/cold the room is and how long power has been plugged in which warms the PCB further.
+This is used for CJC of the tip temperature.
+ > If CHan is extremely high, this indicates the temperature sensor isn't reading correctly ([see Troubleshooting](https://ralim.github.io/IronOS/Troubleshooting/))
+
+### Max C
+
+This indicates the max temperature in °C that the system estimates it can measure the tip reliably to.
+This is dependent on a few factors including the handle temperature so it can move around during use. As you use the iron, the Max increases to a point.
+
+### UpTime
+
+This shows how many deciseconds the unit has been powered for (600 ds = 1 minute).
+
+### Move
+
+This is the last timestamp of movement. When the iron is moved, this should update to match the Time field (previous menu item).
+This can be used for checking performance of the movement detection code.
+
+### Tip Res
+
+This indicates the tip resistance that the device is currently using. For devices with multiple possible values to choose from (Pinecil V2), the appropriate value is automatically detected at every boot-up. Tip should be installed before boot-up or reading can not be done.
+
+### Tip R
+
+This is the raw tip reading in μV. Tip must be installed or reading will be high/inaccurate. At cool, the range of 700-1000 is normal for larger tips and ~1500 for smaller tips (TS80). This is used to evaluate the calibration routines.
+
+### Tip O
+
+This is the offset resulting from the *'Cold Junction Compensation Calibration'*.
+
+### HW G
+
+This indicates the high water mark for the stack for the GUI thread. The smaller this number is, the less headroom we have in the stack.
+As this is a high-water mater, you should only trust this once you have walked through all GUI options to "hit" the worst one.
+
+### HW M
+
+This indicates the high-water mark for the stack for the movement detection thread. The smaller this number is, the less headroom we have in the stack.
+
+### HW P
+
+This indicates the high-water mark for the stack for the PID thread. The smaller this number is, the less headroom we have in the stack.
+
+### Hall
+
+This appears if your device is capable of having a hall effect sensor installed (Pinecil).
+This shows the current magnetic field strength reading from the sensor. It is used to check if the sensor is operational, and for diagnostics and optimal placement of magnets on a stand (higher number is better/stronger). [See Hall Sensor for details](https://ralim.github.io/IronOS/HallSensor/). 
+
+# PD Debug menu
+
+On the Pinecil; if the iron is booted up while long holding the front button (`+`); it will show an extra hidden menu for inspecting USB-PD power adapters. We can also connect to any PD USB power to check Vbus status, even some cell phones with a USB-C port will work if it is PD. It will not show PD messages when Pinecil is powered by DC port, QC, or USB 5V (non-PD). For example, if you connect to a QC charger, you may simply see "PD State 6" which indicates "waiting for source" as no PD messages will be ever be sent and you will not be able to use (`+`) to scroll through PD negotiated messages.
+
+Pressing (`+`) cycles through elements, and (`-`) or unplugging will exit the menu.
+
+The first page shows the PD negotiation stage number; which can be used for diagnosing if PD is not working. Once negotiation is complete; use (`+`) button to advance to other screens which show the different proposals advertised for voltage and current (State 12 means all is good with the PD charger).
+
+#### Below is a method for user modification to convert some early models of Pinecil V1 to safely support 24V on the DC5525 barrel.
+
+⚠️ Warning: do this at your own risk, read everything in this document, and go to the [Pine64 community chat](https://wiki.pine64.org/wiki/Pinecil#Community_links) if you desire advice. An incorrect cut of the trace could render the Pinecil non-working.
+
+Background: a simple user modification to the PCB on _some models_ of original V1 allows it to safely use DC barrel 24V by cutting a trace line to the Vbus which held it back to 21V. You can check whether your Pinecil V1 needs the update or can benefit from it by using a hidden trick in the PD debug menu.
+
+- Follow instructions above to enter the PD Debug menu.
+- After a few seconds or after PD negotiates (state above 5) it will show `[PD No VBus]` if it is not needed (i.e., late model V1). Alternately, if it shows `[VBus]`, then the mod has not been done and there is still a connection to the Vbus (the Vbus connection limits you to 21V until you do the mod).
+- If you need to do the mod, then follow the instructions/links below which have photos. Careful to only cut the trace and nothing else.
+- Then use the PD debug menu again to check for `[PD No Vbus]` before attaching any 24V PSU to the DC barrel. If you do not get the message, then try cutting the trace a little deeper or using alcohol to clear the gap of copper dust. Then check PD messages again. If you need advice/tips, join the Pine64 chat room. 
+
+The mod method is shown in the [February 2022 PINE64 community updates](https://www.pine64.org/2022/02/15/february-update-chat-with-the-machine/). Early Pinecil V1 models required cutting a trace to achieve 24V safety with DC barrel PSU. Late model V1 made sometime in 2022 came with `[No Vbus]` already displayed, and no mod is required.
+
+| Pinecil V2 model released Aug. 2, 2022 is an overhaul of the PCB with all relevant components capable of 28V. V2 requires no mods to support the use of 24V DC Barrel jack charger. |
+:--------
+
+

Documentation/Development.md

@@ -1,20 +1,143 @@
 # Development
 
-Building this software can be performed two ways, using the STMCubeIDE or using command line tools.
+Building this software can be performed two ways: using the STM32CubeIDE or using command line tools.
 
-## STM Cube IDE
+## STM32CubeIDE
 
-The repository is setup to try and make this painless, when starting the IDE you can import the project by pointing the internal search to the workspace folder of this repository. If you start with a fresh installation, close the welcome screen tab, and then in the left sidebar, there is an option to "import". Select General -> Import existing projects -> Set the top location option to this repositories workspace -> Should find the TS100 project.
+The easiest way to start working with the STM32CubeIDE is to create a new project for the STM32F103RCTx.
+Once this is created, remove the auto-generated source code.
+Next, drag the contents of the `source` folder into the project and choose to link to files.
+You will need to update the build settings for include paths and point to the new `.ld` linker file.
 
-## Developing with command line tools & building a release
+## Command line tools and building a release
 
-In the `workspace/TS100` folder there is a makefile that can be used to build the repository using command line tools.
-when running the `make` command, specify which model of the device & the language you would like to use.
+In the `source` folder there is a `Makefile` that can be used to build the repository using command line tools.
+When running the `make` command, specify which model of the device and the language(s) you would like to use.
 
-`make -j8 lang=EN model=TS80`
+### macOS
 
-To build a release instead, run the build.sh script. This will update translations and also build every language for both TS100 and TS80 models.
+Use the following steps to set up a build environment for IronOS on the command line (in Terminal).
+
+1. [Follow steps 1 – 3 here to install the toolchain](https://github.com/glegrain/STM32-with-macOS#0---installing-the-toolchain) needed to compile for STM32 microcontrollers.
+2. Install `python`:
+
+```
+brew install python
+```
+
+3. (Optional) Update `pip` so it doesn't warn you about being out-of-date:
+
+```
+python3 -m pip install --upgrade pip
+```
+
+4. Change to the `source` directory:
+
+```
+cd source
+```
+
+5. Create a Python virtual environment for IronOS named `ironos-venv` to keep your Python installation clean:
+
+```
+python3 -m venv ironos-venv
+```
+
+6. Activate the Python virtual environment:
+
+```
+source ironos-venv/bin/activate
+```
+
+7. Install the dependencies required to run `make-translation.py`:
+
+```
+pip install bdflib
+```
+
+8. All done! See some examples below for how you can build your own IronOS.
+
+### Examples
+
+To build a single language Simplified Chinese firmware for the TS80P with 8 simultaneous jobs:
+
+```
+make -j8 model=TS80P firmware-ZH_CN
+```
+
+To build a European multi-language firmware for the Pinecil with as many simultaneous jobs as there are logical processors on Linux:
+
+```
+make -j$(nproc) model=Pinecil firmware-multi_European
+```
+
+To build a Cyrillic compressed multi-language firmware for the Pinecil with as many simultaneous jobs as there are logical processors on macOS:
+
+```
+make -j$(sysctl -n hw.logicalcpu) model=Pinecil firmware-multi_compressed_Bulgarian+Russian+Serbian+Ukrainian
+```
+
+To build a custom multi-language firmware including English and Simplified Chinese for the TS80:
+
+```
+make -j8 model=TS80 custom_multi_langs="EN ZH_CN" firmware-multi_Custom
+```
+
+To build a custom compressed multi-language firmware including German, Spanish, and French for the TS100 (note if `model` is unspecified, it will default to `TS100`):
+
+```
+make -j8 custom_multi_langs="DE ES FR" firmware-multi_compressed_Custom
+```
+
+To build a release instead, run the `build.sh` script. This will update translations and also build every language for all device models. For macOS users, replace `make -j$(nproc)` in the script with `make -j$(sysctl -n hw.logicalcpu)` before running.
 
 ## Updating languages
 
-To update the language translation files & associated font map, execute the `make_translation.py` code from the translations directory.
+To update the language translation files and their associated font maps, execute the `make_translation.py` code from the `Translations` directory.
+If you edit the translation definitions or the English translation, please also run `gen_menu_docs.py` to update the settings menu documentation automatically.
+
+## Building Pinecil V1
+
+I highly recommend using the command line tools and using Docker to run the compiler.
+It's a bit fussier on setup than the STM tooling, and this is by far the easiest way.
+If you _need_ an IDE I have used [Nuclei's IDE](https://nucleisys.com/download.php).
+Follow the same idea as the STM Cube IDE notes above.
+
+## Building Pinecil V2
+
+To build the Pinecil V2 firmware, you can use a Docker container that provides a consistent development environment across different operating systems, including Windows with WSL2. Here's how to do it:
+
+### Prerequisites
+
+Docker Desktop: Install the latest version of Docker Desktop for your operating system from the official website.
+
+On Windows follow the instructions on the official documentation to install 'Windows Subsystem for Linux' (WSL2).
+
+### Building Steps
+
+1. Clone the repository, initialize and update submodules:
+
+    ```sh
+    git clone --recurse-submodules https://github.com/Ralim/IronOS.git
+    ```
+
+2. Start the Docker container with the development environment:
+
+    ```sh
+    cd IronOS
+    ./scripts/deploy.sh
+    ```
+
+    This script will build a Docker image and run a container with the necessary tools to build the firmware.
+
+3. Build the firmware for Pinecil V2:
+
+    ```sh
+    cd source/
+    ./build.sh -l EN -m Pinecilv2
+    ```
+
+    This command will compile the firmware with English language support for Pinecil V2 board.
+
+4. Find the firmware artifacts:
+    After the build completes successfully, you can find the firmware artifacts in the `source/Hexfile` directory.

Documentation/Flashing/MHP30.md

@@ -0,0 +1,120 @@
+# Flashing / Upgrading your iron
+
+## Downloading source file
+
+In the development of this firmware, there are three _types_ of firmware released.
+These are the "Main" stable releases, which generally have high confidence in being bug free.
+Release candidates are released slightly more often, and these are generally perfectly fine for everyday use. These are released early to allow for translation checking and for wonderful people to help spot bugs and regressions.
+Finally, there are the "mainline" builds, which are built from the main git branch.
+These are built on every change and can be found on the Actions tab (see below).
+
+### Main release
+
+Main releases are made to the [releases page](https://github.com/Ralim/IronOS/releases).
+Download the zip file that matches your model of soldering iron and extract it.
+Select the appropriate file type for your unit, in general Miniware devices need `.hex` and Pinecil needs `.dfu`.
+Flash according to details below
+
+### Bleeding edge / latest
+
+For the _latest_ code, you will need to download the zip file from the artifacts page on the build for what you want.
+Head to the [Actions](https://github.com/Ralim/IronOS/actions) page and then select the run for the appropriate branch you would like.
+In general you probably want `master`.
+
+Once you click on a run, scroll down to the "Artifacts" section and then click on your model to download a zip file.
+Then this works the same as a production release (use the correct file).
+
+# MHP30
+
+This is completely safe, but if it goes wrong just put the `.hex` file from the official website ([MHP30](https://www.minidso.com/forum.php?mod=viewthread&tid=4385&extra=page%3D1) onto the unit and you're back to the old firmware. Downloads for the `.hex` files to flash are available on the [releases page.](https://github.com/Ralim/IronOS/releases) The file you want is called MHP30.zip. Inside the zip file (make sure to extract the file before flashing with it) will be a file called `MHP30_{Language-Code}.hex`.
+
+Officially the bootloader on the devices only works under Windows (use the built-in File Explorer, as alternative file managers or copy handlers like Teracopy will fail). However, users have reported that it does work under Mac, and can be made to work under Linux _sometimes_. Details over on the [wiki page](https://github.com/Ralim/IronOS/wiki/Upgrading-Firmware).
+
+1. Hold the button closest to the tip (MHP30 the left button on the back), and plug in the USB to the computer.
+2. The unit will appear as a USB drive. (Screen will say `DFU` on it.)
+3. Drag the `.hex` file onto the USB drive.
+4. The unit will disconnect and reconnect.
+5. The filename will have changed to end in _.RDY_ or _.ERR_
+6. If it ends with _.RDY_ you're done! Otherwise, something went wrong.
+7. If it didn't work the first time, try copying the file again without disconnecting the device, often it will work on the second shot.
+8. Disconnect the USB and power up the device. You're good to go.
+
+For the more adventurous out there, you can also load this firmware onto the device using an SWD programmer, for easier installation follow the guide at the end of this document.
+
+On the USB-C port, `USB_D+` is shorted to `SWDIO` and `USB_D-` is shorted to `SWCLK` so debugging works without disassembly (attach while staying in the bootloader). Installing [IronOS-dfu](https://github.com/Ralim/IronOS-dfu) is recommended as it allows reliable flashing of binary files with [dfu-util](http://dfu-util.sourceforge.net/).
+
+Noting that for the MHP30 the stock firmware checks a checksum at the end of the first 8k that has to be valid or else it goes into "demo mode".
+
+## Mac
+
+sgr1ff1n (Shane) commented in [issue 11](https://github.com/Ralim/IronOS/issues/11) that upgrading worked on their Mac as per normal:
+
+> I just wanted to say that I was able to update the firmware on my ts100 from the stock version to 1.08 found in this repository using my Mac. I simply followed the same steps however through Finder. I have a MacBook Pro (13-inch, Mid 2012) running Sierra 10.12.4 (16E195).
+
+## Linux
+
+While in the past there were reports of unreliable upgrades, the consensus in [issue 11](https://github.com/Ralim/IronOS/issues/11) is that things work mostly as expected in Linux.
+
+@awigen has contributed a script [flash_ts100_linux.sh](https://raw.githubusercontent.com/Ralim/IronOS/dev/scripts/flash_ts100_linux.sh) that works on Ubuntu 16.04 as well as other distros.
+
+If you want to do it manually (or if the script does not work for some reason) the general procedure is the same as for Windows, the differences are in the way to mount the unit and copy the firmware.
+Remember that after flashing, the firmware filename will have changed to end in `.RDY` or `.ERR` or `.NOT` and only `.RDY` means the flashing was successful!
+
+- The unit has to be mounted as `msdos` type (thanks @balrog-kun for having spotted it). You may disable automount, but unmounting the automounted drive and remounting as `msdos` works fine. You do not need to turn off automounting, but you do need to unmount the device with `umount`.
+- It is recommended to use an all-caps filename for the firmware, even if successful flashing were done with lower case names.
+- Avoid USB hubs, plug directly in your computer.
+- If it fails, try again several times without unplugging. Just let it remount.
+
+Example, to be run as root, once the unit has been plugged in DFU mode and auto-mounted:
+
+```bash
+FW=ts100.hex
+unset NAME
+eval $(lsblk -P -p -d --output NAME,MODEL|grep "DFU[ _]Disk")
+[ -z ${NAME+x} ] && exit 1  # Could not find DFU device
+umount "$NAME"
+mkdir /tmp/mntdfu
+mount -t msdos "$NAME" /tmp/mntdfu
+cp "$FW" "/tmp/mntdfu/$(basename $FW|tr a-z A-Z)"
+sync
+umount /tmp/mntdfu
+rmdir /tmp/mntdfu
+```
+
+Device will reboot and automount will rerun if not disabled.
+Check the extension of your firmware, it should be `.RDY` now.
+
+## FAQ
+
+#### The file is showing up with the extension `.ERR`
+
+This can occur during the programming process if any of the checks in the bootloader fail. This is often triggered by anti-virus software or using a non-Windows host OS.
+
+First, try just copying the file a second time.
+
+1. Attach the iron in DFU mode.
+2. Copy the `.hex` file to the device.
+3. The device disconnects and connects with the `.ERR` file.
+4. Copy the same `.hex` file again **⛔ DO NOT TRY AND DELETE THE OLD ONE ⛔**.
+5. The device will disconnect and reconnect again.
+6. The device _should_ now have the `.RDY` file.
+7. You're done.
+
+If this fails and you are on Mac or Linux reading the wiki page about programming can help. There is also a very long issue thread going through all of the different attempts around this too.
+
+If you are on Windows, it's often best to try another computer (friends, work, partners etc.).
+
+#### Device randomly disconnects or does not show up in DFU mode
+
+1. Check if the USB cable you are using has the data pins; test it on another device. There are a surprisingly large number of micro-USB cables that are power _only_.
+
+2. Try other USB ports. Often different USB controllers will interact with the units differently due to design quirks in the Miniware design.
+
+### Alternative bootloader
+
+If you are an advanced user, and you have used `usb-dfu` tools before, or you would like to learn; there is an alternative bootloader for these irons.
+This will **NOT** show up as a USB storage drive, but instead show up using a standard DFU protocol device. You can then use dfu tools or GUIs to upgrade the iron using the `.bin` files that are posted to the releases page.
+
+To install this alternative bootloader, follow the instructions [here](https://github.com/Ralim/IronOS-dfu/blob/mainline/docs/Bootloader.md).
+
+Note that this is only recommended for users who know what they are doing. If you don't understand how this works, please don't flash this.

Documentation/Flashing/Pinecil V1.md

@@ -0,0 +1,162 @@
+# Flashing / Upgrading your iron
+
+## Downloading source file
+
+In the development of this firmware, there are three _types_ of firmware released.
+These are the "Main" stable releases, which generally have high confidence in being bug free.
+Release candidates are released slightly more often, and these are generally perfectly fine for everyday use. These are released early to allow for translation checking and for wonderful people to help spot bugs and regressions.
+Finally, there are the "mainline" builds, which are built from the main git branch.
+These are built on every change and can be found on the Actions tab (see below).
+
+### Main release
+
+Main releases are made to the [releases page](https://github.com/Ralim/IronOS/releases).
+Download the zip file that matches your model of soldering iron and extract it.
+Select the appropriate file type for your unit, in general Miniware devices need `.hex`, Pinecil V1 needs `.dfu`, and Pinecil V2 needs `.bin`.
+Flash according to details below.
+
+### Bleeding edge / latest
+
+For the _latest_ code, you will need to download the zip file from the artifacts page on the build for what you want.
+Head to the [Actions](https://github.com/Ralim/IronOS/actions) page and then select the run for the appropriate branch you would like.
+In general you probably want `master`.
+
+Once you click on a run, scroll down to the "Artifacts" section and then click on your model to download a zip file.
+Then this works the same as a production release (use the correct file).
+
+# Pinecil V1
+
+- The MCU used in Pinecil supports usb-dfu. Reference [Pinecil Wiki](https://wiki.pine64.org/wiki/Pinecil) for hardware and firmware instructions.
+- Recommended Updater for Windows/MacOS: [Pine64 Updater](https://github.com/pine64/pine64_updater) is an easy-to-use GUI app. It is fast and automatically fetches the newest stable version of IronOS from GitHub. It can also be used to load custom boot logo art.
+- Recommended Updater for Linux/MacOS: [PineFlash](https://github.com/Spagett1/PineFlash) is an easy-to-use GUI app. It is fast and automatically fetches the newest stable version of IronOS from Github. It can also be used to load custom boot logo art.
+
+- Troubleshooting: if you have issues using the Pine64 Updater or your install fails, please go to troubleshooting tips below.
+- The [Pinecil Wiki](https://wiki.pine64.org/wiki/Pinecil) is a great resource for all things Pinecil.
+- Community chat: if troubleshooting doesn't work, then join the Pine64 > Pinecil channel [here](https://wiki.pine64.org/wiki/Pinecil#Live_Community_Chat). There are knowledgeable members in Discord/Telegram/Matrix. Discord has a bridge bot connection to Telegram and Matrix so that all pine64 volunteers/members can see advice for Pinecil and related items or just get tips on which power supply to purchase.
+- One advantage of Pinecil is that you cannot permanently damage it doing a firmware update (because DFU is in ROM); an update could render Pinecil temporarily inoperable if you flash an invalid firmware. But no worries, simply re-flashing with a working firmware copy will fix everything.
+- USB-C cable is required to do an update. Generally, all USB controllers work, but some hubs have issues, so it is preferred to avoid USB hubs for updates.
+- Alternate Update Methods: if your OS is not currently supported by the [Pine64 Updater](https://github.com/pine64/pine64_updater) or it does not meet your needs, i.e., you want to install a beta version, the below manual methods may be used.
+
+## Linux and Mac
+
+### Steps
+
+⛔ Do not use the DC barrel jack while updating firmware or you may destroy your PC. ⛔
+
+1. Highly recommend updating `dfu-util` to the newest version before starting.
+2. Download and extract the firmware package from GitHub [IronOS Releases](https://github.com/Ralim/IronOS/releases).
+3. Enter DFU mode: press and hold (`-`) button at the back of the iron before you connect the USB-C cable.
+4. Connect USB to PC, and USB-C to back of Pinecil, keep holding (`-`) button down.
+5. Once the USB cable is connected at two ends, wait ~10 seconds more, then release the (`-`) button.
+6. The screen will stay **black/off** to indicate the Pinecil is in DFU mode. This is normal.
+7. Using `dfu-util` you can flash the firmware using a command line like this:
+
+```
+dfu-util -D Pinecil_EN.dfu
+```
+
+Choose the file name from the folder with the appropriate 2-letter country code for your chosen language (i.e., EN = English).
+
+### Troubleshooting:
+
+- If you get a message stating that `More than one DFU capable USB device found!` when running the above command you probably have an old version of `dfu-util` installed. Might be worth updating. You can still install on the old version, but you will have to specify which DFU interface to flash to. Running the command `dfu-util -l` will show you if there are several DFU devices detected. Example:
+
+```
+Found DFU: [28e9:0189] ver=0100, devnum=48, cfg=1, intf=0, path="1-1", alt=1, name="@Option Bytes  /0x1FFFF800/01*016Be", serial="??"
+Found DFU: [28e9:0189] ver=0100, devnum=48, cfg=1, intf=0, path="1-1", alt=0, name="@Internal Flash  /0x08000000/128*001Kg", serial="??"
+```
+
+In this example we see that more than one part of the Pinecil is detected as a DFU interface and we need to specify which one we want to flash to. We want the `Internal Flash` so in this case we can use `alt=0` to identify which interface to target. The command would then look like this:
+
+```
+dfu-util -D Pinecil_EN.dfu -a 0
+```
+
+- Note: if you use an older release of `dfu-util` and do not see `alt=0, name="@Internal Flash /0x08000000/128*001Kg"` when running `dfu-util -l` you likely will not be able to update without first updating 'dfu-util'.
+- If your update is crashing part-way into the update, there is sometimes an issue with older/fussy USB controllers (they can show up/disappear/then show up again)
+  - Try a direct connection to the USB port, do not use a USB hub, and use shorter cable. If possible, pick a port connected to the main board.
+  - Switch to a different PC/Laptop and use different ports. USB-C ports are recommended but some have also reported having a fussy C port.
+  - Hold down the (-) button for the entire firmware update, do not release until near the end.
+- `DC Low` message: a pc/laptop cannot fully power Pinecil, it generally can only get 5 V (non-PD) to communicate for firmware updates and Pinecil will report 'DC Low'. This is normal.
+- If `dfu-util` aborts with an error like
+  ```
+  dfu-util: Cannot open DFU device 28e9:0189 found on devnum 42 (LIBUSB_ERROR_IO)
+  ```
+  and `dmesg` reports USB errors like these
+  ```
+  kernel: usb 1-1: reset full-speed USB device number 42 using xhci_hcd
+  kernel: usb 1-1: device descriptor read/64, error -71
+  kernel: usb 1-1: device descriptor read/64, error -71
+  kernel: usb 1-1: reset full-speed USB device number 42 using xhci_hcd
+  kernel: usb 1-1: device descriptor read/64, error -71
+  kernel: usb 1-1: device descriptor read/64, error -71
+  kernel: usb 1-1: reset full-speed USB device number 42 using xhci_hcd
+  kernel: usb 1-1: Device not responding to setup address.
+  kernel: usb 1-1: Device not responding to setup address.
+  kernel: usb 1-1: device not accepting address 42, error -71
+  ```
+  then try to disable USB autosuspend.
+  This can be done with a set of udev rules specifically for the Pinecil:
+  ```udev
+  SUBSYSTEM=="usb", ATTR{idVendor}=="28e9", ATTR{idProduct}=="0189", MODE:="0660"
+  SUBSYSTEM=="usb", ATTR{idVendor}=="28e9", ATTR{idProduct}=="0189", GROUP="plugdev"
+  SUBSYSTEM=="usb", ATTR{idVendor}=="28e9", ATTR{idProduct}=="0189", TEST=="power/control", ATTR{power/control}="on"
+  ```
+
+## Windows
+
+Two Options for Windows
+
+### Option 1: use command line
+
+### Steps
+
+⛔ Do not use the DC barrel jack while updating firmware or you may destroy your PC. ⛔
+
+1. Using command line `dfu-util` is similar to above for Linux / Mac.
+2. Highly recommend updating `dfu-util` to the newest version.
+3. Download and extract the firmware package from GitHub [IronOS Releases](https://github.com/Ralim/IronOS/releases).
+4. Enter DFU mode: press and hold (-) button at the back of the iron (do not release).
+5. Connect USB to PC, and USB-C to the back of Pinecil, keep holding (-) button down.
+6. Screen will stay **black/off** to indicate the Pinecil is in DFU mode. This is normal.
+7. After the USB cable is connected at both ends, wait ~10 seconds more, then release the (-) button.
+8. Open PowerShell or Command window.
+9. Change to the directory of the unzipped firmware files
+10. Using `dfu-util,` flash the firmware using a command like this:
+
+```
+dfu-util -D Pinecil_EN.dfu
+```
+
+- If you have errors, see Troubleshooting above.
+
+### Option 2: use the GUI tool from chip vendor
+
+### Steps
+
+⛔ Do not use the DC barrel jack while updating firmware or you may destroy your PC. ⛔
+
+1. If you are uncomfortable with the command line, then this chip vendor supplied GUI tool/drivers is an option.
+2. Download and extract the firmware package from GitHub [IronOS Releases](https://github.com/Ralim/IronOS/releases).
+3. Download both the `GD32 MCU DFU TOOL` and the `GD32 Dfu Drivers`.
+   - GD32 DFU Tool [here](http://www.gd32mcu.com/en/download?kw=GD32+MCU+Dfu+Tool&lan=en). If the link breaks, search for "GD32 MCU Dfu Tool" at this [link](http://www.gd32mcu.com/en/download/).
+   - GD32 DFU Drivers [here](http://www.gd32mcu.com/en/download?kw=GD32+Dfu+Drivers&lan=en). If the link breaks, search for "GD32 Dfu Drivers" at this [link](http://www.gd32mcu.com/en/download/).
+   - Check properties of both downloads, tick Unblock if needed, then Unzip
+4. Install the drivers and the GD32 DFU tool (ignore prompts to update the tool).
+5. Enter DFU mode: press and hold (`-`) button at the back of Pinecil (do not release).
+6. Connect Pinecil to a PC via USB cable (do not release the (`-`) yet).
+7. Screen will stay **black/off** to indicate the Pinecil is in DFU mode. This is normal.
+8. You may hear a beep from Windows as it connects to Pinecil in DFU mode.
+9. If you see windows notification that it `does not recognize USB device`, then you didn't connect, repeat step 3-8.
+10. Open the GD32 DFU Tool (ignore prompts to update tool).
+11. At the top of the DFU tool, you should see `GD DFU DEVICE 1` appear if you successfully connected Pinecil.
+12. If DFU Device box at top is blank, then Pinecil is not connected in DFU mode, repeat steps 3-11.
+13. If it has been more than 10 seconds since you connected the USB cable, Release the (`-`) button. (don't use Upload from Device section)
+14. Select `Download to device` > Open > Browse to folder you unzipped in step 2.
+15. Select the `hex` file for language. English is Pinecil_EN.hex , tick `Verify after download`.
+16. Click `OK` at bottom. After a few minutes you will see 0-100%, Download successfully! Click `Leave DFU` at the top.
+17. Disconnect Pinecil cable from PC, plug it into a power supply.
+18. Do not need to press any buttons, a new screen should appear.
+19. To confirm upgrade, hold the minus (`-`) button down for a few seconds, it then shows new firmware version v2.xx.x....date
+
+- If you have errors, see Troubleshooting above.

Documentation/Flashing/Pinecil V2.md

@@ -0,0 +1,36 @@
+# Flashing / Upgrading your iron
+
+## Downloading source file
+
+In the development of this firmware, there are three _types_ of firmware released.
+These are the "Main" stable releases, which generally have high confidence in being bug free.
+Release candidates are released slightly more often, and these are generally perfectly fine for everyday use. These are released early to allow for translation checking and for wonderful people to help spot bugs and regressions.
+Finally, there are the "mainline" builds, which are built from the main git branch.
+These are built on every change and can be found on the Actions tab (see below).
+
+### Main release
+
+Main releases are made to the [releases page](https://github.com/Ralim/IronOS/releases).
+Download the zip file that matches your model of soldering iron and extract it.
+Select the appropriate file type for your unit, in general Miniware devices need `.hex`, Pinecil V1 needs `.dfu`, and Pinecil V2 needs `.bin`.
+Flash according to details below.
+
+### Bleeding edge / latest
+
+For the _latest_ code, you need to download the zip file from the artifacts page for the build that you want.
+Head to the [Actions](https://github.com/Ralim/IronOS/actions) page and then select the run for the appropriate branch and beta you would like.
+In general you probably want `master`.
+
+Once you click on a run, scroll down to the "Artifacts" section and then click on your device model name to download a zip file.
+Then this works the same as a production release (use the correct file).
+
+# Pinecil V2
+
+- The MCU in Pinecil V2 is Bouffalo BL706 and does _not_ use usb-dfu for flashing as the previous Pinecil V1 MCU did.
+- See the Pinecil Wiki page [here](https://wiki.pine64.org/wiki/Pinecil#Firmware_&_Updates) for instructions.
+- The V2 uses the [BLISP flasher](https://github.com/pine64/blisp) to upload the firmware to the MCU.
+- The [Pinecil Wiki](https://wiki.pine64.org/wiki/Pinecil) is a great resource for all things Pinecil.
+- Community chat: if there are issues updating, then join the Pine64 > Pinecil channel [here](https://wiki.pine64.org/wiki/Pinecil#Live_Community_Chat). There are knowledgeable members in Discord/Telegram/Matrix. Discord has a bridge bot connection to Telegram and Matrix so that all pine64 volunteers/members can see advice for Pinecil and related items or just get tips on which power supply to purchase.
+- One advantage of Pinecil is that you cannot permanently damage it doing a firmware update (because BIN is in ROM); an update could render Pinecil temporarily inoperable if you flash an invalid firmware. But no worries, simply re-flashing with a working firmware copy will fix everything.
+- USB-C cable is required to do an update. Generally, all USB controllers work, but some hubs have issues, so it is preferred to avoid USB hubs for updates.
+- Background on the [BL706 chipset](https://lupyuen.github.io/articles/bl706)

Documentation/Flashing/TS100.md

@@ -0,0 +1,120 @@
+# Flashing / Upgrading your iron
+
+## Downloading source file
+
+In the development of this firmware, there are three _types_ of firmware released.
+These are the "Main" stable releases, which generally have high confidence in being bug free.
+Release candidates are released slightly more often, and these are generally perfectly fine for everyday use. These are released early to allow for translation checking and for wonderful people to help spot bugs and regressions.
+Finally, there are the "mainline" builds, which are built from the main git branch.
+These are built on every change and can be found on the Actions tab (see below).
+
+### Main release
+
+Main releases are made to the [releases page](https://github.com/Ralim/IronOS/releases).
+Download the zip file that matches your model of soldering iron and extract it.
+Select the appropriate file type for your unit, in general Miniware devices need `.hex` and Pinecil needs `.dfu`.
+Flash according to details below
+
+### Bleeding edge / latest
+
+For the _latest_ code, you will need to download the zip file from the artifacts page on the build for what you want.
+Head to the [Actions](https://github.com/Ralim/IronOS/actions) page and then select the run for the appropriate branch you would like.
+In general you probably want `master`.
+
+Once you click on a run, scroll down to the "Artifacts" section and then click on your model to download a zip file.
+Then this works the same as a production release (use the correct file).
+
+# TS100
+
+This is completely safe, but if it goes wrong just put the `.hex` file from the official website ([TS100](https://www.minidso.com/forum.php?mod=viewthread&tid=868&extra=page%3D1) onto the unit and you're back to the old firmware. Downloads for the `.hex` files to flash are available on the [releases page.](https://github.com/Ralim/IronOS/releases) The file you want is called TS100.zip. Inside the zip file (make sure to extract the file before flashing with it) will be a file called `TS100_{Language-Code}.hex`.
+
+Officially the bootloader on the devices only works under Windows (use the built-in File Explorer, as alternative file managers or copy handlers like Teracopy will fail). However, users have reported that it does work under Mac, and can be made to work under Linux _sometimes_. Details over on the [wiki page](https://github.com/Ralim/IronOS/wiki/Upgrading-Firmware).
+
+1. Hold the button closest to the tip (MHP30 the left button on the back), and plug in the USB to the computer.
+2. The unit will appear as a USB drive. (Screen will say `DFU` on it.)
+3. Drag the `.hex` file onto the USB drive.
+4. The unit will disconnect and reconnect.
+5. The filename will have changed to end in _.RDY_ or _.ERR_
+6. If it ends with _.RDY_ you're done! Otherwise, something went wrong.
+7. If it didn't work the first time, try copying the file again without disconnecting the device, often it will work on the second shot.
+8. Disconnect the USB and power up the device. You're good to go.
+
+For the more adventurous out there, you can also load this firmware onto the device using an SWD programmer, for easier installation follow the guide at the end of this document.
+
+On the bottom of the MCU riser PCB, there are 4 pads for programming. On v2.51A PCB revision `USB_D+` is shorted to `SWDIO` and `USB_D-` is shorted to `SWCLK` so debugging works without disassembly (attach while staying in the bootloader). Installing [IronOS-dfu](https://github.com/Ralim/IronOS-dfu) is recommended as it allows reliable flashing of binary files with [dfu-util](http://dfu-util.sourceforge.net/).
+
+On some newer TS100 units, the SWD pins are wired up to the USB pins, on older ones they are not sadly.
+
+## Mac
+
+sgr1ff1n (Shane) commented in [issue 11](https://github.com/Ralim/IronOS/issues/11) that upgrading worked on their Mac as per normal:
+
+> I just wanted to say that I was able to update the firmware on my ts100 from the stock version to 1.08 found in this repository using my Mac. I simply followed the same steps however through Finder. I have a MacBook Pro (13-inch, Mid 2012) running Sierra 10.12.4 (16E195).
+
+## Linux
+
+While in the past there were reports of unreliable upgrades, the consensus in [issue 11](https://github.com/Ralim/IronOS/issues/11) is that things work mostly as expected in Linux.
+
+@awigen has contributed a script [flash_ts100_linux.sh](https://raw.githubusercontent.com/Ralim/IronOS/dev/scripts/flash_ts100_linux.sh) that works on Ubuntu 16.04 as well as other distros.
+
+If you want to do it manually (or if the script does not work for some reason) the general procedure is the same as for Windows, the differences are in the way to mount the unit and copy the firmware.
+Remember that after flashing, the firmware filename will have changed to end in `.RDY` or `.ERR` or `.NOT` and only `.RDY` means the flashing was successful!
+
+- The unit has to be mounted as `msdos` type (thanks @balrog-kun for having spotted it). You may disable automount, but unmounting the automounted drive and remounting as `msdos` works fine. You do not need to turn off automounting, but you do need to unmount the device with `umount`.
+- It is recommended to use an all-caps filename for the firmware, even if successful flashing were done with lower case names.
+- Avoid USB hubs, plug directly in your computer.
+- If it fails, try again several times without unplugging. Just let it remount.
+
+Example, to be run as root, once the unit has been plugged in DFU mode and auto-mounted:
+
+```bash
+FW=ts100.hex
+unset NAME
+eval $(lsblk -P -p -d --output NAME,MODEL|grep "DFU[ _]Disk")
+[ -z ${NAME+x} ] && exit 1  # Could not find DFU device
+umount "$NAME"
+mkdir /tmp/mntdfu
+mount -t msdos "$NAME" /tmp/mntdfu
+cp "$FW" "/tmp/mntdfu/$(basename $FW|tr a-z A-Z)"
+sync
+umount /tmp/mntdfu
+rmdir /tmp/mntdfu
+```
+
+Device will reboot and automount will rerun if not disabled.
+Check the extension of your firmware, it should be `.RDY` now.
+
+## FAQ
+
+#### The file is showing up with the extension `.ERR`
+
+This can occur during the programming process if any of the checks in the bootloader fail. This is often triggered by anti-virus software or using a non-Windows host OS.
+
+First, try just copying the file a second time.
+
+1. Attach the iron in DFU mode.
+2. Copy the `.hex` file to the device.
+3. The device disconnects and connects with the `.ERR` file.
+4. Copy the same `.hex` file again **⛔ DO NOT TRY AND DELETE THE OLD ONE ⛔**.
+5. The device will disconnect and reconnect again.
+6. The device _should_ now have the `.RDY` file.
+7. You're done.
+
+If this fails and you are on Mac or Linux reading the wiki page about programming can help. There is also a very long issue thread going through all of the different attempts around this too.
+
+If you are on Windows, it's often best to try another computer (friends, work, partners etc.).
+
+#### Device randomly disconnects or does not show up in DFU mode
+
+1. Check if the USB cable you are using has the data pins; test it on another device. There are a surprisingly large number of micro-USB cables that are power _only_.
+
+2. Try other USB ports. Often different USB controllers will interact with the units differently due to design quirks in the Miniware design.
+
+### Alternative bootloader
+
+If you are an advanced user, and you have used `usb-dfu` tools before, or you would like to learn; there is an alternative bootloader for these irons.
+This will **NOT** show up as a USB storage drive, but instead show up using a standard DFU protocol device. You can then use dfu tools or GUIs to upgrade the iron using the `.bin` files that are posted to the releases page.
+
+To install this alternative bootloader, follow the instructions [here](https://github.com/Ralim/IronOS-dfu/blob/mainline/docs/Bootloader.md).
+
+Note that this is only recommended for users who know what they are doing. If you don't understand how this works, please don't flash this.

Documentation/Flashing/TS80(P).md

@@ -0,0 +1,118 @@
+# Flashing / Upgrading your iron
+
+## Downloading source file
+
+In the development of this firmware, there are three _types_ of firmware released.
+These are the "Main" stable releases, which generally have high confidence in being bug free.
+Release candidates are released slightly more often, and these are generally perfectly fine for everyday use. These are released early to allow for translation checking and for wonderful people to help spot bugs and regressions.
+Finally, there are the "mainline" builds, which are built from the main git branch.
+These are built on every change and can be found on the Actions tab (see below).
+
+### Main release
+
+Main releases are made to the [releases page](https://github.com/Ralim/IronOS/releases).
+Download the zip file that matches your model of soldering iron and extract it.
+Select the appropriate file type for your unit, in general Miniware devices need `.hex` and Pinecil needs `.dfu`.
+Flash according to details below
+
+### Bleeding edge / latest
+
+For the _latest_ code, you will need to download the zip file from the artifacts page on the build for what you want.
+Head to the [Actions](https://github.com/Ralim/IronOS/actions) page and then select the run for the appropriate branch you would like.
+In general you probably want `master`.
+
+Once you click on a run, scroll down to the "Artifacts" section and then click on your model to download a zip file.
+Then this works the same as a production release (use the correct file).
+
+# TS80 / TS80P
+
+This is completely safe, but if it goes wrong just put the `.hex` file from the official website ([TS80](https://www.minidso.com/forum.php?mod=viewthread&tid=868&extra=page%3D1)/[TS80P](https://www.minidso.com/forum.php?mod=viewthread&tid=4070&extra=page%3D1) onto the unit and you're back to the old firmware. Downloads for the `.hex` files to flash are available on the [releases page.](https://github.com/Ralim/IronOS/releases) The file you want is called TS80.zip or TS80P.zip. Inside the zip file (make sure to extract the file before flashing with it) will be a file called `TS80_{Language-Code}.hex`/`TS80P_{Language-Code}.hex`.
+
+Officially the bootloader on the devices only works under Windows (use the built-in File Explorer, as alternative file managers or copy handlers like Teracopy will fail). However, users have reported that it does work under Mac, and can be made to work under Linux _sometimes_. Details over on the [wiki page](https://github.com/Ralim/TS80/wiki/Upgrading-Firmware).
+
+1. Hold the button closest to the tip (MHP30 the left button on the back), and plug in the USB to the computer.
+2. The unit will appear as a USB drive. (Screen will say `DFU` on it.)
+3. Drag the `.hex` file onto the USB drive.
+4. The unit will disconnect and reconnect.
+5. The filename will have changed to end in _.RDY_ or _.ERR_
+6. If it ends with _.RDY_ you're done! Otherwise, something went wrong.
+7. If it didn't work the first time, try copying the file again without disconnecting the device, often it will work on the second shot.
+8. Disconnect the USB and power up the device. You're good to go.
+
+For the more adventurous out there, you can also load this firmware onto the device using an SWD programmer, for easier installation follow the guide at the end of this document.
+
+On the USB port, `USB_D+` is shorted to `SWDIO` and `USB_D-` is shorted to `SWCLK` so debugging works without disassembly (attach while staying in the bootloader). Installing [IronOS-dfu](https://github.com/Ralim/IronOS-dfu) is recommended as it allows reliable flashing of binary files with [dfu-util](http://dfu-util.sourceforge.net/).
+
+## Mac
+
+sgr1ff1n (Shane) commented in [issue 11](https://github.com/Ralim/IronOS/issues/11) that upgrading worked on their Mac as per normal:
+
+> I just wanted to say that I was able to update the firmware on my TS100 from the stock version to 1.08 found in this repository using my Mac. I simply followed the same steps however through Finder. I have a MacBook Pro (13-inch, Mid 2012) running Sierra 10.12.4 (16E195).
+
+## Linux
+
+While in the past there were reports of unreliable upgrades, the consensus in [issue 11](https://github.com/Ralim/IronOS/issues/11) is that things work mostly as expected in Linux.
+
+@awigen has contributed a script [flash_TS100_linux.sh](https://raw.githubusercontent.com/Ralim/IronOS/master/Flashing/flash_TS100_linux.sh) that works on Ubuntu 16.04 as well as other distros.
+
+If you want to do it manually (or if the script does not work for some reason) the general procedure is the same as for Windows, the differences are in the way to mount the unit and copy the firmware.
+Remember that after flashing, the firmware filename will have changed to end in `.RDY` or `.ERR` or `.NOT` and only `.RDY` means the flashing was successful!
+
+- The unit has to be mounted as `msdos` type (thanks @balrog-kun for having spotted it). You may disable automount, but unmounting the automounted drive and remounting as `msdos` works fine. You do not need to turn off automounting, but you do need to unmount the device with `umount`.
+- It is recommended to use an all-caps filename for the firmware, even if successful flashing were done with lower case names.
+- Avoid USB hubs, plug directly in your computer.
+- If it fails, try again several times without unplugging. Just let it remount.
+
+Example, to be run as root, once the unit has been plugged in DFU mode and auto-mounted:
+
+```bash
+FW=TS80.hex
+unset NAME
+eval $(lsblk -P -p -d --output NAME,MODEL|grep "DFU[ _]Disk")
+[ -z ${NAME+x} ] && exit 1  # Could not find DFU device
+umount "$NAME"
+mkdir /tmp/mntdfu
+mount -t msdos "$NAME" /tmp/mntdfu
+cp "$FW" "/tmp/mntdfu/$(basename $FW|tr a-z A-Z)"
+sync
+umount /tmp/mntdfu
+rmdir /tmp/mntdfu
+```
+
+Device will reboot and automount will rerun if not disabled.
+Check the extension of your firmware, it should be `.RDY` now.
+
+## FAQ
+
+#### The file is showing up with the extension `.ERR`
+
+This can occur during the programming process if any of the checks in the bootloader fail. This is often triggered by anti-virus software or using a non-Windows host OS.
+
+First, try just copying the file a second time.
+
+1. Attach the iron in DFU mode.
+2. Copy the `.hex` file to the device.
+3. The device disconnects and connects with the `.ERR` file.
+4. Copy the same `.hex` file again **⛔ DO NOT TRY AND DELETE THE OLD ONE ⛔**.
+5. The device will disconnect and reconnect again.
+6. The device _should_ now have the `.RDY` file.
+7. You're done.
+
+If this fails and you are on Mac or Linux reading the wiki page about programming can help. There is also a very long issue thread going through all of the different attempts around this too.
+
+If you are on Windows, it's often best to try another computer (friends, work, partners etc.).
+
+#### Device randomly disconnects or does not show up in DFU mode
+
+1. Check if the USB cable you are using has the data pins; test it on another device. There are a surprisingly large number of micro-USB cables that are power _only_.
+
+2. Try other USB ports. Often different USB controllers will interact with the units differently due to design quirks in the Miniware design.
+
+### Alternative bootloader
+
+If you are an advanced user, and you have used `usb-dfu` tools before, or you would like to learn; there is an alternative bootloader for these irons.
+This will **NOT** show up as a USB storage drive, but instead show up using a standard DFU protocol device. You can then use dfu tools or GUIs to upgrade the iron using the `.bin` files that are posted to the releases page.
+
+To install this alternative bootloader, follow the instructions [here](https://github.com/Ralim/IronOS-dfu/blob/mainline/docs/Bootloader.md).
+
+Note that this is only recommended for users who know what they are doing. If you don't understand how this works, please don't flash this.

Documentation/GettingStarted.md

@@ -0,0 +1,113 @@
+# Getting Started
+
+Getting started with IronOS on your Pinecil/TS80/TS80P/TS100.
+If your device did not come with IronOS already installed, or if you need to update to the latest version; please see the flashing guide for your device:
+
+- [MHP30](https://ralim.github.io/IronOS/Flashing/MHP30)
+- [Pinecil V1](https://ralim.github.io/IronOS/Flashing/Pinecil%20V1/)
+- [Pinecil V2](https://ralim.github.io/IronOS/Flashing/Pinecil%20V2/)
+- [TS80 / TS80P](https://ralim.github.io/IronOS/Flashing/TS80%28P%29/)
+- [TS100](https://ralim.github.io/IronOS/Flashing/TS100)
+
+It is recommended to update to the newest stable release.
+
+Once your Iron has been flashed, on first power on it _may_ warn you about the system settings being reset.
+_Do not panic_; this is 100% completely normal. This is here to note to you that they have been reset to handle the internal structure changing.
+
+If you receive a warning about the accelerometer or USB-PD not being detected, please see [here](https://ralim.github.io/IronOS/HardwareIssues/).
+
+## The Home screen (or idle screen)
+
+This is the landing page of the firmware, from here you can choose to either go into the [settings menu](#Settings-Menu) or go into [soldering mode](#Soldering-Mode).
+
+By default this will show a screen similar to the one below:
+
+![Home Screen](https://raw.githubusercontent.com/Ralim/IronOS/dev/Documentation/images/HomeScreen.png)
+
+Note that this may be drawn mirrored depending on the orientation of your screen (detailed mode shows a different home screen).
+
+The soldering iron symbol on the screen will appear near the tip. This is here to indicate that pressing the button closest to the front of the iron will enter soldering mode.
+
+And naturally, the slider controls icon (or spanner icon in older versions) represents that pressing the button near the rear of the soldering iron will enter the settings menu.
+
+In the settings, you can turn on a detailed idle screen instead. The buttons still function the same, however, the image will be swapped for a text telling you the current status of the iron with extra details.
+
+Depending on how your device is being powered, at right side of the screen, the firmware will either show the voltage your unit is being provided with, a battery icon (if battery mode is enabled) or a power plug icon.
+
+If you see an (**X**) where the soldering iron should be, this indicates that the firmware can't see the tip connected. This could indicate a problem with the iron or tip. First, try removing the tip screw and tip and gently reinstalling both; ensure that the tip is seated all the way back. If the issue persists please see the [hardware issues section](https://ralim.github.io/IronOS/HardwareIssues/).
+
+This OLED screen features burn-in protection; if no buttons or movement have been detected for a while it will automatically blank the screen to reduce burn-in when the iron is left unattended. Any movement or button press will wake the screen.
+
+### Hidden Extras
+
+Additionally to the two icons shown, there are two "hidden" actions that can be performed on this menu.
+
+On devices that do not support profile mode, if you press and hold the button near the tip (`+/A`), this enters the temperature adjustment screen. Normally this is not required; but if you would like to adjust the set temperature _before_ the tip starts to heat, this can be useful.
+
+If you press and hold the button near the rear of the iron (`-/B`), it will take you into the [debug menu](https://ralim.github.io/IronOS/DebugMenu/).
+
+## Soldering Mode
+
+When you press the button to enter the soldering mode, the iron will instantly start to heat up the tip.
+
+The firmware defaults to 320 °C as the set point for the soldering mode, however on this screen you can enter into the adjustment screen by pressing either button.
+
+Pressing and holding the button near the tip will enter **Boost** mode. This allows a temporary override of the set temperature to a higher (or lower) value. This can be useful as a way to force the tip to a higher temperature to drive more wattage into a large joint when the thermal connection is not ideal.
+
+Pressing and holding the rear button will exit soldering mode and land you back at the home screen. You can also do this by pressing both buttons at once and this will also work, this is a bit harder to do but is kept for compatibility with the Miniware firmware.
+
+Pressing and holding **both** buttons at once will enter locked mode, which will prevent the buttons from doing anything. You can in the settings allow boost mode in locked mode optionally. This can be useful if you find yourself hitting the buttons and entering into the temperature adjustment screen by accident.
+
+### Idle Sleep
+
+If the iron detects a period of time without any significant movement, it will enter sleep mode. This is indicated with a screen graphic similar to Zzzz (or text in detailed mode).
+
+In Sleep mode, the temperature of the iron automatically lowers to 150 °C (default), which is just below the melting point of the solder. This helps reduce rate of oxidation and damage to the iron tip. In general, when not using the iron, unplug it or let it sleep to increase the longevity of replaceable tips. The default sleep temperature can be customized.
+
+Simply picking up or moving the iron will wake it back up into soldering mode. You can also press any button and this will also wake the iron up.
+
+#### Optional Hall Effect Feature (Pinecil only):
+
+Pinecil has an unpopulated footprint (U14) for a hall effect sensor (Si7210-B-00-IV). Adding the sensor and placing a neodymium magnet on the holder stand will trigger Pinecil to sleep after it enters the stand, and Zzzz will appear on-screen. The magnet is positioned on the stand in proximity to the sensor/handle which then activates one of 10 user defined settings (0=off, 1=lowest sensitivity, 9=highest sensitivity). Read the Hall Sensor document for [details on installation](https://ralim.github.io/IronOS/HallSensor/).
+
+### Idle Shutdown
+
+If, after entering sleep mode, the iron still does not see movement for a much longer time (default=10 minutes); it will shut down and return to the home screen.
+
+## Profile Mode (MHP30 only)
+
+On devices that support it, a long press on `(+/A)` takes you into profile mode, which initiates the profile selected in the relevant settings.
+
+Profile mode plays out as follows:
+
+1. Check if the temperature is below 55C. If not, you will get a warning and cannot enter profile mode.
+2. Preheat by raising the target temperature to the configured preheat temperature with the configured preheat speed.
+3. Wait for the device to reach the preheat temperature.
+4. Gradually move the target temperature to the configured end temperature of the first phase over the configured duration. 
+5. Wait for the device to reach the end temperature. 
+6. Repeat steps 4 and 5 for the next phases until there are no more phases configured.
+7. Cool down by lowering the target temperature to 0 with the configured cooldown speed. 
+8. Once the temperature is below 55C, sound the buzzer (if available) and exit profile mode. 
+
+You can manually exit profile mode manually in the same way as the soldering mode, by pressing and holding the rear button or pressing both buttons at once.
+
+## Settings Menu
+
+The settings menu is the most evolving aspect of the firmware, so each option is not documented here. However, do not panic, as every menu option has an on-screen description so you don't _need_ to come back here to figure them all out.
+
+To navigate the menu, the two buttons act separately.
+The rear button (`-/B`) is pressed to enter the menu and scrolls down the main options, and the other front button (`+/A`) will enter and change the current option.
+
+To see a description of an option, just wait, and after a few seconds, it will scroll across the screen.
+
+The menu is comprised of a 'main menu' of categories and then sub-items that allow you to adjust parameters.
+
+You can long hold buttons to change through options faster, and there is some acceleration when holding the buttons.
+
+There is a small scrollbar that appears along the right edge of the screen to indicate how far through the current list you are (looks like a dot).
+
+Additionally, this scrollbar will blink rapidly when you are on the last value in a range of a sub-menu. For example, if you are in Motion Sensitivity, which has a range of 0 - 9, it will blink when you are at 9.
+
+I highly recommend taking a few minutes to go through all of the options in the menu to get a feel for what you can change, almost every aspect of the internal system is adjustable to suit your needs.
+
+If you want to start over, simply go to Advanced settings > Restore default settings, confirm using the front (`+/A`) button. This sets all menu items to defaults, and keeps the same version firmware.

Documentation/HallSensor.md

@@ -0,0 +1,23 @@
+# Hall Effect Sensor
+
+## Sleep Mode Menu
+
+In Sleep mode, the iron automatically lowers the temperature to 150 °C (default). This default was chosen as it is just below the melting point of many solders. A stand-by lower temperature helps reduce the rate of oxidation and prevents damage to iron tips. In general, when not using the iron, unplug it or let it sleep to increase the longevity of replaceable tips. The default sleep temperature can be customized.
+
+Simply moving the iron or pressing any button will wake it back up into soldering mode.
+
+### Optional Hall Effect Feature (Pinecil only):
+
+Inside the [Sleep Menu](https://ralim.github.io/IronOS/Settings/#setting-sleep-temp) is an additional type of sleep setting. Pinecil has an unpopulated footprint (**U14**) for a hall effect sensor, Silicon Labs **Si7210-B-00-IV**. After installing the hall effect sensor (HES), it is possible to auto-trigger Pinecil to enter sleep mode when it enters the stand, and _Zzzz_ will appear (or text in detailed mode). This could be a fun enhancement for any Pinecil and adds a feature typically only found in more expensive high-end irons. The HES is available at many electronic stores for ~$2-$6.
+
+After installing the HES on the PCB, place a magnet on the stand close enough to the sensor to activate one of ten user selectable settings.
+
+- 0=off, 1=1000, 2=750, 3=500, 4=250, 5=150, 6=100, 7=75, 8=50, 9=25 (9 has the highest sensitivity to magnets)
+- Setting of 1 might be used if you solder on PCBs with magnets and do not wish Pinecil to auto-sleep constantly. A very strong/large magnet would be required on the stand to activate the sleep mode if you use setting 1.
+- Setting of 9 would be useful if you only had a small magnet and are not concerned about Pinecil falsely triggering sleep mode near magnetized items/tools.
+- Actively watch the _hall_ number change while you slowly move the magnet around to seek the best locations & whether you have too many or too few magnets. Position the magnet(s) where you have the highest hall number will ensure consistent sleep mode when you place the iron in the stand. This requires some experimenting.
+- [See debug menu for how to display the _Hall_ number](https://ralim.github.io/IronOS/DebugMenu/)
+- Note that the sensor is physically located near the copper contacts for the tip at the front of the handle. [Reference Schematics U14](https://files.pine64.org/doc/Pinecil/Pinecil_schematic_v1.0a_20201120.pdf).
+- Neodymium magnets are recommended. If using small magnets, 2-3 may be required, but too many could also be detrimental.
+- Positioning/type/quantity of magnets is important for best results. Sometimes too many magnets breaks the effect by distorting the magnetic field **[as seen in this demo video](https://www.youtube.com/shorts/afkqKwCX00I)**. The video shows magnets at the top of the stand, and the pinecil goes correctly into Zzzz with _only_ those magnets. When more magnets are added at the side, the Pinecil did not go to sleep, which is contrary to the goal. See the PDF below for details on magnetic fields with SI7210-B.
+- Orientation of North and South faces of magnets is important to increase reaction of the hall sensor [see data sheet SI7210-B-00-IV](https://www.silabs.com/documents/public/application-notes/an1018-si72xx-sensors.pdf).

Documentation/Hardware.md

@@ -0,0 +1,62 @@
+## Notes on the various supported hardware
+
+
+### TS100
+
+TS100\* is a neat soldering iron:
+
+- can run from 9-25V DC;
+- provides a power range that is determined by the input voltage;
+- voltages below 12V don't overly work well for any substantial mass;
+- the default firmware can be found [here](https://www.minidso.com/forum.php?mod=viewthread&tid=892&extra=page%3D1).
+
+![](https://brushlesswhoop.com/images/ts100-og.jpg)
+
+
+### TS80
+
+TS80\* is a successor to TS100:
+
+- uses _Quick Charge 3.0_ / _QC3_ capable charger only (18W max);
+- doesn't support PD as it is not designed on the hardware level;
+- the default firmware can be found [here](https://www.minidso.com/forum.php?mod=viewthread&tid=3208&extra=page%3D1).
+
+![](https://core-electronics.com.au/media/catalog/product/4/2/4244-01.jpg)
+
+
+### TS80P
+
+TS80P\* is a successor to TS80:
+
+- supports _Quick Charge 3.0_ (_QC3_: 9V/3A, 18W max);
+- supports _Power Delivery_ (_PD_: 9V/3A & 12V/3A, 30W max)\*\*;
+- the default firmware can be found [here](https://www.minidso.com/forum.php?mod=viewthread&tid=4085&extra=page%3D1).
+
+\*\*: use valid PD device that supports 12V/3A as power source to get full 30W potential, otherwise the iron will fall back to 9V/18W power mode.
+
+![](https://static.eleshop.nl/mage/media/catalog/product/cache/10/image/800x/040ec09b1e35df139433887a97daa66f/s/-/s-l1600_5.jpg)
+
+
+### MHP30
+
+MHP30 is a **M**ini **H**ot **P**late:
+
+- accelerometer is the MSA301, this is mounted roughly in the middle of the unit;
+- USB-PD is using the FUSB302;
+- the hardware I2C bus on PB6/7 is used for the MSA301 and FUSB302;
+- the OLED is the same SSD1306 as everything else, but it’s on a bit-banged bus.
+
+
+### Pinecil
+
+Pincecil\*:
+
+- first model of soldering iron from PINE64;
+- the default firmware can be found [here](https://files.pine64.org/os/Pinecil/Pinecil_firmware_20201115.zip).
+
+![](https://pine64.com/wp-content/uploads/2020/11/pinecil-bb2-04.jpg?v=0446c16e2e66)
+
+
+\*: Please note: these soldering irons do *NOT* contain DC/DC converters. This means that your power at the tip is a function of the supplied voltage. Just because the iron "supports" running at a wide range of voltages, you should always use a voltage near the upper limit where possible. It is highly recommended to use a PD adapter where possible as this allows the iron to _know_ the limitations of your supply. The marked irons can only turn the tip on and off in software, this means that they can't control the maximum power drawn from the supply. This is why when using PD the iron may select a lower voltage than your power supplies maximum. This is to prevent your power supply failing from over current. For more information about power management underhood, please, [see the related documentation section](https://ralim.github.io/IronOS/Power/).
+
+

Documentation/HardwareIssues.md

@@ -0,0 +1,39 @@
+# Hardware Issues
+
+While we would love everything to work perfectly, sometimes that just doesn't happen.
+Please do not email maintainers directly, these will generally be ignored.
+Keep issue discussions to GitHub issues or the discussions page so that the whole community can help and work together.
+
+## No Accelerometer detected
+
+If your iron was previously working, this could be a bug (and we are very sorry). Please check the currently open and recently closed issues to check if anyone else has run into this. You can try going back to a release on the firmware to test if this is a new issue before opening an issue.
+
+If this is a new iron, also feel free to open an issue if you don't see any; a vendor _could_ have changed the model of the accelerometer on us without warning _again_. In which case, support should come shortly.
+
+If your iron is new, there is a slim chance your accelerometer may be DOA and need replacement.
+
+**Note this warning will only be shown the first few times until settings are reset**
+
+## No USB-PD IC detected
+
+Generally, this means either something went very awry in the firmware, or the chip is not answering as would normally be expected. Try rolling back to an earlier release to confirm if the issue still persists then the device may need repair. If you have some form of seller protection/support, you most likely want to reach out to this to be safe. If you don't, you can always attempt to replace the IC yourself. As of writing both the TS80P and Pinecil use the FUSB302.
+
+**Note this warning will only be shown the first few times until settings are reset**
+
+## No tip detected
+
+If your tip is not being detected, the most likely cause is that the heater element inside the tip has been damaged from over-temperature, being dropped or bad luck. As the heater coil is part of the temperature measurement circuit neither will work if it's damaged.
+
+The best way to see if this is the case is to measure the resistance across the contacts to the tip using a multimeter.
+you are expecting to see measurements in the range of 4-10 ohms. Anything higher than 10 ohms is _generally_ an issue.
+
+## Iron will not heat up and displays a high temperature
+Check the Rtip and CHan numbers ([see debug menu](https://ralim.github.io/IronOS/DebugMenu/)). Extremly high CHan is suspect to a problem with the cold junction compensation temperature sensor.
+
+For Pinecil V1, inspect near U10 which is the TMP36 sensor ([see issue here](https://github.com/Ralim/IronOS/issues/1234)). You may be able to reflow/resolder the TMP36 chip at U10 to correct a weak solder joint.
+
+If it worked on older firmware, but not on 2.16+, weak solder joints are suspect. The newer firmware runs the ADC a bit faster to keep tighter control of the tip temperature. Normally this wont cause an issue as the output from the TMP36 is powerful enough to keep up without any issue. But if you have a weak or cold solder joint this could cause issues.
+
+If the CHan is extremely high, and reflowing the temperature sensor does not resolve the issue; inspect the pins in the main MCU, possibly try giving them a light squeeze to the board while watching CHan.
+
+If you have a different device, follow the same logic and locate the temperature sensor on your device.

Documentation/History.md

@@ -1,148 +1,339 @@
 # Version Changes
 
-## V2.11
 
-* First TS80P support
-* Added in a USB-PD driver stack for the FUSB302
-* Fixed some graphical glitches
+# V2.21
 
-## V2.10
+### Features & changes
 
-* GUI polish (animations and scroll bars)
-* Power pulse to keep power supplies alive
-* Adjustable tip response gain
+- Bluetooth Low Energy support for PinecilV2
+- Large cleanup of translation files; and refactor of how we handle fonts for translations
+- Fixes for I2C corruption on PinecilV2
+- Option for using adjustable profiles on USB-PD or not
+- Cleanups and improvements to the generated [documents website](https://ralim.github.io/IronOS)
 
-## V2.09
+### PinecilV2 notes
 
-* Adjustable steps in temperature adjustment
-* Git hash now in build string
-* Adjustable language to set if US units are available or not
-* Some minor QC3 improvements
+For Pinecil V2 users blisp is currently my recommended CLI tool for updating the device. It is built for all main OS's automatically. This does not apply to V1 devices. If your iron came with a blue grip, its a V1 and update the same as always. If your device came with a green silicone grip its a V2 device.
 
-## V2.08
+Alternatively you can use Spagett1's PineFlash tool that should provide a GUI interface for PinecilV1 & PinecilV2.
 
-* Fixes auto start in sleep mode
-* Power limiters
-
-## V2.07
-
-* QC fixes 
-* Cosmetic fixes for leading 0's
-
-## V2.06
-
-* Warning on settings reset
-* Temp temp re-write
-* Display calibration offset
-* Hide some leading 0's
-* Menu timeouts
-
-## V2.05
-
-* Language updates
+For a small number of V2 Pinecil devices there appears to be an interference issue between the Bluetooth Low Energy and some devices; more information here. If this occurs to you, please let us know in the issue and rollback to 2.20 for now.
 
 
-## V2.04
+# V2.20
 
-* GUI updates
-
-## V2.03
-
-* Support for new accelerometers
-
-## V2.02
-
-* Adds small font
-
-## V2.01
-
-* Newer settings menu
-
-## V2.00
-
-* Complete re-write of the low layer system to use the STM32 HAL for easier development
-* This allowed easier setup for the new ADC auto measuring system
-* Better tip PWM control
-* Moved to FreeRTOS for scheduling
-* Complete re-write from blank
-* Added detailed screen views
-* Added smaller font for said screen views
+- First "full" release for PinecilV2
+- Loots of documentation updates
+- Documentation is [now nicely readable as a site](https://ralim.github.io/IronOS/GettingStarted)
+- A fair collection of bugfixes for PinecilV2
+- Cold Junction Calibration was reworked and now occurs _at next boot_ to make it easier to perform when the device is cold
 
 
-## V1.17
+# V2.19
 
-* Added blinking cooldown display
-* Allowed smaller sleep timeout values
-* New font!
-* Automatic startup option
+- Bug-fix Infinite Boot Logo
+- Shutdown settings for MHP30
+- Accelerometer sensitivity for MHP30
+- Allow showing unique device ID
+- Bug-fix chance of a power pulse at device boot
+- Updated translations
+- Improved documents, added features table
 
-## V1.16
 
-* Added automatic rotation support
-* Added power display graph
+# V2.18
 
-## V1.15
+- Support for animated bootup logo's
+- Bootup logo's moved to their own IronOS-Meta repo
+- New Vietnamese translation (limited due to screen size)
+- Fixes for SC7A20 in TS80(P)
+- Updated translations
+- Better Instructions/documents
 
-* Added support for a custom bootup logo to be programmed via the DFU bootloader
 
-## V1.14
+# V2.17
 
-* Changed input voltage cutoff to be based on cell count rather than voltage
+### Features & changes
 
-## V1.13
+- Indicate status of VBus for modding Pinecil (debug menu)
+- Better hall effect sensor sensitivity adjustment (larger range with more steps)
+- Temperature increment will "round" to nearest multiple of increase amount
+- Build setup migrated to Alpine (You can now build in docker easily, and on PinePhone/PinePhonePro)
+- -> Removed proprietary compiler for Pinecil RISCV now all uses normal gcc
+- -> Removed using the arm specific build of gcc for the one that alpine ships (Miniware devices)
+- Logo generator python script creates `.dfu` files for ease of use with Pinecil
+- Upgrades to translations
+- Support for new GD32103 based TS100 units turning up on the market
+- Raw hall effect reading now shows in the Pinecil debug menu
+- Fixed automatic orientation for newer TS80P's with the SC7 accelerometer
+- User interface slight changes
+- New `metadata.zip` file to allow the Pine Updater to automatically fetch information on releases
 
-* Swapped buttons for menu to prevent accidentally changing first menu item
-* Added auto key repeat
+### Notes
 
-## V1.12
+- VBus mod detection may not play well with all PPS chargers. If your iron reboots when you view this in the debug menu its not a fault. ([#1226](https://github.com/Ralim/IronOS/issues/1226))
+- `metadata.zip` is only designed for use by automatic software, ignore it for normal use
+- More details on Pinecil VBus mod coming via other channels.
+- Hall effect sensor is not fitted to Pinecil's by default, you have to fit this yourself if you want the feature
+- Tweaks to the Accelerometer code means the drivers are slightly more fussy. If you run into any issues let us know in the discussion or issues.
+- -> Release has been updated to build `e065be3` after one bug with the BMA223 was found.
 
-* Increases sensitivity options to be 1*9 with 0 off state
-* Fixes issue where going from COOL *> soldering can leave screen off
 
-## V1.11
+# V2.16
 
-* Boost mode
-* Change sensitivity options to be 1*8
+- Overhaul of the Timer+ADC setup with help from @sandmanRO
+- Overhaul of the PID with help from @sandmanRO
+- Settings _should_ now upgrade in place to future versions, with resets only happening to new/changed settings
+- Shows error if tip runaway (failed temperature sensor) is detected
+- USB-PD now has a timeout, to allow forcing QC3 negotiation to start faster
+- QC3 Voltages are now adjustable to user desired setpoint
+- Added a small tolerance to allow "overvoltage" on QC3 above unit specifications.
+    - Please note: Doing this is entirely at your own risk!
+- New Advanced view that is much nicer to use and a very good daily driver option from @Mel-kior
+- OLED brightness and contrast thanks to @alvinhochun
+- Scrollbar is fixed so it doesnt jump around when menus are shown/hidden
+- Moved to `.dfu` files from `.bin` to make flashing commands easier
+- Every language had translation updates I believe
+- Romanian language added
 
-## V1.10
 
-* Adds help text to settings
-* Improves settings for the display update rate
+# V2.15
 
-## V1.09
+### Features & changes
 
-* Adds display modes, for slowing down or simplifying the display
+- MHP30 support
+- Multi-lingual firmware combinations now exist for Pinecil
+- More fine grained voltage controlled options
+- USB-PD improvements (version one and two)
+- More configuration options for power pulse
+- All font / character encoding has been very reworked
+- More translation updates than one can count 
+- More languages 😱 
 
-## V1.08
+### MHP30 support
 
-* Fix settings menu not showing flip display
+The MHP30 is a small reflow station from Miniware.
+Thanks to a massive amount of help from @g3gg0 this firmware brings the beginnings of support for this unit.
+Also kudo's to @Vinigas  and @GoJian for helping with testing.
+This is not a _final_ version I'm sure, but this is a working, usable version of firmware support.
+Programs the same as any one Miniware unit using drag and drop.
+**Note: The boot logo scripts will need updates for this unit, so not supported yet.**
 
-## V1.07
+The flood doors are now open for feature requests for this unit :)
 
-* Adds shutdown time to automatically shutdown the iron after inactivity
 
-## V1.06
+# V2.14
 
-* Changes H and C when the iron is heating to the minidso chevron like images
+- Fixing auto rotation bug in the LIS accelerometer in the TS80/TS80P
+- Adds support for two new accelerometers
+  -- SC7A20 (Future Pinecil batch) #786
+  -- MSA301 (Newer TS80P) #761
+- Add warnings if accelerometer or USB-PD IC's are not detected #752
+  -- Only shows for first few boots, to help catch unsupported models
+- Fixed cooling down blink to be sane speed #769
+- Cleanup of threads and slightly faster power negotiation #790
 
-## V1.05
+- Updates to flashing scripts #775
+- Documentation updates all over the place (and the wiki was given a cleanup)|
+- Updates to makefile #792 #787
+- Cleanup the folder name of the source code #800
+- clang-format spec setup #801
 
-* Adds ability to calibrate the input voltage measurement
 
-## V1.04
+# V2.13
 
-* Increased accuracy of the temperature control
-* Improved PID response slightly
-* Allows temperature offset calibration
-* Nicer idle screen
+- First _official_ Pinecil release
+- All of the wire for Pinecil releases added
+- Updated Translations
+- Delay accelerometer to help with entering sleep on startup
+- Dual speed PWM to help with power limit control
+- Improve heat up time
+- Adds locking mode
+- Improved docs all over the place
+- Repo rename occured TS100 -> IronOS
+- Hall effect sensor support added (not fitted in Pinecil but optional)
+- QC 20V support for Pinecil
+- CI upgrades for faster builds
+- Fixed bug with accelerometer model on Pinecil
+- Rework of all of the temperature curves for better accuracy
 
-## V1.03
 
-* Improved Button handling
-* Ability to set motion sensitivity
-* DC voltmeter page shows input voltage
+# V2.12
 
-## V1.02
+- Only released as pre-release
+- [TS80P] Improvements to the PD negotiation to handle a few more adapters cleanly
+- Pause on the last item in a list
+- Clean up the menu (removed both enables and settings, so that you can turn things off easier)
+- Removing the very old single line menu style.
 
-* Adds hold both buttons on IDLE to access the therometer mode
-* Changes the exit soldering mode to be holding both buttons (Like original firmware)
+
+# V2.11
+
+- First TS80P support
+- Added in a USB-PD driver stack for the FUSB302
+- Fixed some graphical glitches
+
+
+# V2.10
+
+- GUI polish (animations and scroll bars)
+- Power pulse to keep power supplies alive
+- Adjustable tip response gain
+
+
+# V2.09
+
+- Adjustable steps in temperature adjustment
+- Git hash now in build string
+- Adjustable language to set if US units are available or not
+- Some minor QC3 improvements
+
+
+# V2.08
+
+- Fixes auto start in sleep mode
+- Power limiters
+
+
+# V2.07
+
+- QC fixes
+- Cosmetic fixes for leading 0's
+
+
+# V2.06
+
+- Warning on settings reset
+- Temp temp re-write
+- Display calibration offset
+- Hide some leading 0's
+- Menu timeouts
+
+
+# V2.05
+
+- Language updates
+
+
+# V2.04
+
+- GUI updates
+
+
+# V2.03
+
+- Support for new accelerometers
+
+
+# V2.02
+
+- Adds small font
+
+
+# V2.01
+
+- Newer settings menu
+
+
+# V2.00
+
+- Complete re-write of the low layer system to use the STM32 HAL for easier development
+- This allowed easier setup for the new ADC auto measuring system
+- Better tip PWM control
+- Moved to FreeRTOS for scheduling
+- Complete re-write from blank
+- Added detailed screen views
+- Added smaller font for said screen views
+
+
+# V1.17
+
+- Added blinking cooldown display
+- Allowed smaller sleep timeout values
+- New font!
+- Automatic startup option
+
+
+# V1.16
+
+- Added automatic rotation support
+- Added power display graph
+
+
+# V1.15
+
+- Added support for a custom bootup logo to be programmed via the DFU bootloader
+
+
+# V1.14
+
+- Changed input voltage cutoff to be based on cell count rather than voltage
+
+
+# V1.13
+
+- Swapped buttons for menu to prevent accidentally changing first menu item
+- Added auto key repeat
+
+
+# V1.12
+
+- Increases sensitivity options to be 1\*9 with 0 off state
+- Fixes issue where going from COOL \*> soldering can leave screen off
+
+
+# V1.11
+
+- Boost mode
+- Change sensitivity options to be 1\*8
+
+
+# V1.10
+
+- Adds help text to settings
+- Improves settings for the display update rate
+
+
+# V1.09
+
+- Adds display modes, for slowing down or simplifying the display
+
+
+# V1.08
+
+- Fix settings menu not showing flip display
+
+
+# V1.07
+
+- Adds shutdown time to automatically shutdown the iron after inactivity
+
+
+# V1.06
+
+- Changes H and C when the iron is heating to the minidso chevron like images
+
+
+# V1.05
+
+- Adds ability to calibrate the input voltage measurement
+
+
+# V1.04
+
+- Increased accuracy of the temperature control
+- Improved PID response slightly
+- Allows temperature offset calibration
+- Nicer idle screen
+
+
+# V1.03
+
+- Improved Button handling
+- Ability to set motion sensitivity
+- DC voltmeter page shows input voltage
+
+
+# V1.02
+
+- Adds hold both buttons on IDLE to access the therometer mode
+- Changes the exit soldering mode to be holding both buttons (Like original firmware)

Documentation/Logo.md

@@ -0,0 +1,79 @@
+# Startup Logo / Animation
+
+When the device starts, you can have it optionally show either a static image or an animation. You can also set if these should stay on the screen or dismiss after some amount of time.
+These can be an elegant way to personalise your device or just mark it as your one at a meetup where there may be multiple.
+
+All devices supported by IronOS support this logo, and follow a similar process for setting one up. Please read the below general information as well as any model specific notes.
+
+Bootup logos are stored at the end of the flash storage in the Iron; next to the user settings. By locating them at the end of storage they are not erased during the normal firmware upgrade process. Once a logo is set it should stay (unless we need to change things in the main firmware); so to erase your logo you will also find that we generate an erase file. Alternatively your method of flashing _may_ support doing a full erase flash which will also work for this.
+
+## Generating the Logo files
+
+Because logos are stored at a fixed location in the device's internal flash; we can use the same method to flash these as you would normal firmware.
+This does also mean that we need to convert the image/animation file into the format that IronOS understands.
+
+IronOS uses a pre-processed file format to dramatically reduce the amount of space required to store the image; allowing for animations and saving space.
+
+In the [IronOS-Meta](https://github.com/Ralim/IronOS-Meta) repository is a `python` script to convert images into this pre-processed file format.
+Additionally, memebers of the community have contributed back their logo images as well. We provide these pre-converted for all models and ready to use in [IronOS-Meta/releases](https://github.com/Ralim/IronOS-Meta/releases).
+Download the zip for Pinecil or Miniware and then install using the instructions in the Flashing section below.
+
+If you want to make custom art then it needs to be converted with the Python script.
+You can checkout the repository or use the download-as-zip button in the Github web interface to download the code.
+
+Inside the download code is a `Boot Logos` folder, inside here is the python script required for logo conversion.
+It is easiest if you copy your logo file to be converted into this folder too, in order to keep commands shorter.
+
+The image can be in color and any size, but it will be resized and converted to 1-bit color. However, it looks best if you create a 96x16 image (`png` or `bmp`) in any image editor and color the pixels black & white manually. The thresholding used for converting colour to B&W may not always work as well as one would hope.
+
+The converter requires at least Python3 and Pillow apps. Follow online instructions for installing Python and Pillow on your machine. Any reasonably recent version should work well.
+
+When running the script on the Windows operating system; it is recommended to use `Powershell` rather than the old `Command Prompt`.
+
+For installing pillow; you can install it via your package manager (Debian and similar distros) or via pip. To install via pip the command should be `python -m pip install pillow`.
+
+In your shell you can now execute `python img2logo.py input.png out -m ${model}` to convert the file `input.png` and create output files in the folder `out`.
+The model should be replaced by one of the following options:
+
+- `miniware` for older Miniware Irons -> TS100, TS80, TS80P
+- `pinecilv1` for the Pinecil V1
+- `pinecilv2` for the Pinecil V2
+- `ts101` for the Miniware TS101 [^1]
+- `s60` for the Squire S60 [^1]
+- `mhp30` for the Miniware MHP30
+
+Different models are used for different flash locations for the image storage.
+This means that files are **not** interchangeable between devices. If you are flashing multiple devices you will need to create a different file for different models.
+
+After processing its expected to have a `.hex` and `.dfu` file created to be used. Which one to use will depend on your device.
+
+Note: make sure your image file is in the same folder as script files (img2logo.py, output_dfu.py, output_hex.py).
+
+[^1] Note that these devices have larger resolution screens that the logo system supports right now. Fixes are coming for this soon, roughly scheduled for 2.23.
+
+## Flashing the Logo
+
+### Upload via virtual disk (TS100,TS101,TS80,TS80P,S60,MHP30)
+
+If you normally update your firmware by having your device show up as a flash drive this is the method for you.
+This applies to all Miniware + S60 devices running the stock DFU bootloader.
+
+Place your device into update mode (usually by holding the B button when connecting your device to your pc via USB).
+Upload the `.hex` file you created earlier as if it was a firmware update. Do any normal tricks required for firmware flashing if any are required.
+Afterwards the firmware should indicate that it has worked (often by creating a `.rdy` file).
+
+At this point unplug your iron and re-connect it to power to start normally and the logo should welcome you.
+
+### Upload via GUI flash tool (PinecilV1/V2)
+
+If you normally upload your firmware using a helper application, they should accept the files from the bootlogo the same as the normal firmware.
+Try the `.dfu` file first and then the `.hex`. If neither work then the application may not be updated to be able to handle boot logos. And you may need to use a different/newer tool.
+
+### Upload via dfu-util (PinecilV1/IronOS-DFU)
+
+For the PinecilV1 and for any devices that have been converted to use `IronOS-DFU` as the bootloader you can flash these via the `dfu-util` command line tool.
+For these flash as per usual using the `.dfu` file. Afterwards power cycle and the logo should show up.
+
+### Upload via blisp (PinecilV2)
+
+For the PinecilV2 we suggest `blisp` as the command line tool to use if you are not using a GUI tool. `blsip` has been updated to accept `.dfu` files as well as the `.bin` files it historically used. As such you use the `.dfu` file for the logo and flash as per normal otherwise and it will work and reboot at the end. It should show you your new logo after flashing.

Documentation/Menu.md

@@ -1,29 +1,37 @@
 # Menu System
 
-In this firmware for these soldering irons, all settings are adjustable on the device itself. This means you do **not** require a computer to change any settings.
+In this firmware for these soldering irons, all settings are adjustable on the device itself. This means a computer is **not** required to change any setting.
 
 ## Soldering mode
 
 In this mode the iron works as you would expect, pressing either button will take you to a temperature change screen.
-Use each button to go up and down in temperature. Pressing both buttons will exit you from the temperature menu (or wait 3 seconds and it will time out).
-Pressing both buttons or holding the button near the USB will exit the soldering mode.
-Holding the button at the front of the iron will enter boost mode (if enabled).
+- Use each button to go up/down in temperature. Pressing both buttons exits the temperature menu (or wait 3 seconds and it will time out).
+- Pressing both buttons or holding the rear button (`-/B`) will exit Soldering Mode.
+- Holding the front button (`+/A`) will enter [Boost mode](https://ralim.github.io/IronOS/Menu/#boost-mode) (if enabled).
 
-## Settings Menu
+## Profile mode (MHP30 only)
 
-This menu allows you to cycle through all the options and set their values.
-The button near the USB cycles through the options, and the one near the tip changes the selected option.
-Note that settings are not saved until you exit the menu.
-If you leave the unit alone (ie don't press any buttons) on a setting, after 3 seconds the screen will scroll a rough description of the setting.
+In this mode, accessible by long pressing `(+/A)`, the configured profile will be initiated.
+- You cannot adjust the temperature or enter boost mode.
+- Pressing both buttons or holding the rear button (`-/B`) will exit Profile Mode as well.
 
+## Settings mode
+
+This mode allows you to cycle through all the options and set custom values.
 The menu is arranged so that the most often used settings are first.
-With submenu's being selected to enter using the front button (as if you were going to change the setting).
-Scrolling through the submenu will return you back to its entry location after you scroll through all of the options.
+
+- The rear button (`-/B`) cycles through the main options. (declines i.e. Additional warning to proceed.)
+- The front button (`+/A`) either enters a submenu or changes the selected option. (accepts i.e. Additional warning to proceed.)
+- If the device is unplugged before exiting the main menu settings will not be saved.
+- To exit the menu, either continue to press (`-/B`) or hold it until the idle screen is reached. Alternatively, you could press (`-/A`) & (`-/B`) simultaneously to exit the submenu and once more to exit the main menu.
+- If you idle on a setting (i.e., don't press any buttons), after 3 seconds, the screen scrolls a brief description (mini help guide).
+- Enter submenus using the front button (`+/A`) if you are going to change it or wish to view it.
+- Scrolling through the all options of a submenu will return you back to its entry location.
 
 ### Calibrating input voltage
 
-Due to the tolerance on the resistors used for the input voltage divider, some irons can be up to 0.6V out on the voltage measurement.
-Please calibrate your iron if you have any issues with the cutoff voltage.
+Due to the tolerance on the resistors used for the input voltage divider, some irons can be up to 0.6 V out on the voltage measurement.
+Please calibrate your iron if you have any issues with the cutoff voltage. This calibration is not required if you have no issues.
 Note that cutoff messages can also be triggered by using a power supply that is too weak and fails under the load of the iron.
 
 To calibrate your iron:
@@ -31,47 +39,35 @@ To calibrate your iron:
 1. Measure the input voltage with a multimeter and note it down.
 2. Connect the input to your iron.
 3. Enter the settings menu
-4. Under the advanced submenu
+4. Under the Advanced submenu
 5. Select the calibrate voltage option
 6. Use the front and back buttons to adjust the displayed voltage to minimize the error to your original measurement
-7. Hold both buttons to save and exit to the menu
+7. Press both buttons at the same time to Save and Exit to the menu
 
-### Tip Model Selection
+### Calibrate Tip CJC
+This calibrates the [Cold Junction Compensation](https://ralim.github.io/IronOS/Temperature/) *(CJC)* for the tip. This is normally not needed unless you have an issue with tip temperature or your tips are wearing out prematurely. Changing tip lengths does not necessarily mean a calibration is needed. Check first that your tips are not defective and measured resistance is close to specifications *[Pinecil / TS100 short tips **6.2 Ω**, long tips **8 Ω**, TS80/P ~**4.5 Ω**]*.
 
-The menu now lets you select which tip you are using with your iron. This lets the unit know which gain value to use for your tip, this varies slightly between models and can help with temperature accuracy.
-There is also an option for a *custom* tip. This basically means that you will tune the tip parameters yourself.
+What this is for:<br>
+Some tips have an offset on their readings which causes issues, i.e. The actual temperature of the tip is much higher than displayed. Follow the steps below to calibrate this.
 
-### Calibrating tip offset (Set tip model)
+Caution:<br>
+If the method below is not followed, the iron could be worse than before calibration. If you need to repeat the method, first unplug and let the handle/PCB cool down to room temperature.
 
-Some tips will have an offset on their readings, to calibrate this out perform the following steps:
-
-1. Connect power to your iron
-2. Make sure the tip is at room temperature (ie. wait for a fair while after using the iron before calibration)
-3. Enter the settings menu
-4. Scroll down to the advanced menu, and then the temperature calibration
-5. Press the button to change the option (tip button)
-6. The display will start to scroll a warning message to check that the tip is at ambient temperature!
-7. Press the button near the tip of the iron to confirm
-8. The display will go to "...." for a short period of time as the unit measures the tip temperature and the handle temperature and compares them
-9. The display will then go back to *TMP CAL*
-10. Calibration is done, just exit the settings menu as normal
-11. You're done, enjoy your iron!
-
-### Calibration of custom tip
-
-There are two methods to calibrate the tip, the simple mode which requires boiling water, and an advanced mode that requires a method of measuring the actual tip of the tip.
-
-Advanced mode is preffered.
-
-In simple mode you first need to have the tip at room temperature to start, and then when prompted place the tip into a cup of boiling water, wait a few seconds and then press a button to confirm.
-
-In advanced mode, follow instructions on the screen, you will need to adjust the ranges to find two calibration points by measuring the tip temperature directly. This tends to be significantly more accurate.
-
-If you do calibrate your own values for a tip because it's missing from the menu or because you think the one in the menu is really wrong, raise an issue on github and I'll be happy to look at adding it or revising the existing settings.
+1. Connect power to your device.
+2. Go to **`Advanced Settings`** using (`-/B`) and press (`+/A`) to select it. Use (`-/B`) to scroll to **`Calibrate CJC at next boot`** and confirm with (`+/A`).
+3. Accept the *'warning text'* with (`+/A`).
+3. Exit the settings menu as usual by pressing and holding (`-/B`).
+4. Unplug you device.
+5. **Critical: Make sure a tip is attached & wait until the tip & handle are at room temperature.** (Wait a reasonable amount of time after having used the device.)
+6. Power the device and ideally keep it out of your hands (You know it might get warm.).
+7. The display shows **`calibrating ....`** for a short time while the device measures and compares the tip and handle voltages.
+8. **`Calibration done!`** is displayed for 3 seconds. The new offset value can later be viewed in the **`Debug menu`**.
+9. Calibration is done and the device proceeds booting.
 
+Note: offsets are dependant on your tip, temperature sensor, and the MCU. It's the culmination of tolerances at rest. Typical values are 700-1000 range. This is only designed to be used at boot while cold (ambient / room temperature), as temperatures drift apart as soon as power is connected. Doing this reading repeatedly could result in wide varience of the offset number and/or incorrect calibration.
 
 ### Boost mode
 
-This allows you to change the front key (one near the tip) to become a boost button when you hold it for > 2 seconds. This allows you to set this button to change the soldering temperature for short periods. For example when soldering a big joint and you want to boost the temperature a bit.
+This allows you to change the front button (`+/A`) to become a boost button when you hold it for > 2 seconds. A boost button changes the soldering temperature for short periods. For example, when soldering a big joint and you need a much higher temperature, hold the (`+/A`) button down and it will temporarily increase the temperature to your 'boost' setting. When you release the button, the temperature will gradually go back to the normal set temperature.
 
-The boost temperature is set in the settings menu.
+The boost temperature is set in Soldering settings.

Documentation/Power.md

@@ -1,24 +1,53 @@
 # Power & Performance
 
-Both the TS100 and TS80 are PWM controlled resistive heating elements.
+All of the irons are [PWM controlled](https://www.digikey.com/en/blog/pulse-width-modulation#) resistive heating elements.
 This means that the electronics in the handle can only turn the heating element on and off.
-This *means* that the power proivded in the tip is 100% controlled by the supply voltage used.
+This *means* that the power provided in the tip is 100% controlled by the supply voltage used (higher voltage PSU = higher performance).
 
-Both irons at their simplest are just a resistor connected to your power source via a switch.
+Irons at their simplest are just a resistor (Ω) connected to your power source via a switch.
 
-When the switch is on, the power in the resistor is `Current (I) times Volts (V)`.
-Current through the resistor is `Volts (V) divided by Resistance (R)`.
-Combining these two gives the common equation, power is `Volts (V) squared / Resistance (R)`.
+- When the switch is on, the power in the resistor is: $P(watts) = V(volts) \times\ I(current=amps)$
+- Current through the resistor is:  $I(amps) = V(volts) ÷ Ω (resistance)$
+- Combining these gives some common equations for Power
+
+   $P(watts) = V(volts) * I(amps)$ or $P = V^2 ÷ Ω$
+
+The resistance of the tip is a fixed constant in ohms (Ω):
+- 6.2 Ω  Pine64 short tip
+- 8.0 Ω  TS100/Pinecil long tip
+- 4.5 Ω  TS80(P)
+
+This means the power delivered to the soldering tip is proportional to the voltage squared.
+Therefore the Pinecil and TS100 perform poorly when run off 12V power supplies and may issue a `Thermal Runaway` message (weak power supply).
+
+
+
+#### Use an [Ohm calculator](https://www.rapidtables.com/calc/electric/power-calculator.html#dc) to quickly derive watts.
+
+| Type       | Volts| / | Tip Ω | = |  Amps | * | Volts | = | Watts |
+| :--------: | :--: |:-:| :---: |:-:|:-----:|:-:| :---: |:-:|:-----:|
+| USB QC3.0  | 9V   | / | 4.5 Ω | = |  2.0A | * |  9V   | = |  18W  |
+| USB-C PD   | 12V  | / | 4.5 Ω | = |  3.0A | * |  12V  | = |  32W  |
+| USB-C PD   | 20V  | / | 8.0 Ω | = |  2.5A | * |  20V  | = |  50W  |
+| USB-C PD   | 20V  | / | 6.2 Ω | = |  3.2A | * |  20V  | = |  64W  |
+| DC Barrel  | 24V  | / | 8.0 Ω | = |  3.0A | * |  24V  | = |  72W  |
+| DC Barrel  | 24V  | / | 6.2 Ω | = |  3.8A | * |  24V  | = |  92W  |
+| EPR PD3.1  | 28V  | / | 8.0 Ω | = |  3.5A | * |  28V  | = |  98W  |
+| EPR PD3.1  | 28V  | / | 6.2 Ω | = |  4.5A | * |  28V  | = |  126W |
 
-The resistance of the tip is fixed, 8.5 ohms for the TS100 and 4.5 ohms for the TS80.
 
-This means that for both irons, the power delivered to the soldering tip is proportional to the voltage used, squared.
-This is why the TS100 performs poorly when run off 12V power supplies.
 
 ## Output Control & Regulation
 
-Both soldering irons use a FET to switch the power to the soldering iron tip. This is a P-MOSFET and its controlled via a small transistor circuit, which in turn is controlled via the STM32. The STM32 controls this PWM output proportional to the output from the PID control loop running in the software.
+These soldering irons use a FET to switch the power to the soldering iron tip. This is a P-MOSFET and its controlled via a small transistor circuit, which in turn is controlled via the MCU (i.e., STM32). The MCU controls this PWM output proportional to the output from the PID control loop running in the software.
 
-To measure the tip temperature in the iron, the iron has a small op-amp connected across the terminals, this is setup to measure the voltage across the same terminals that are used the power the tip. In order to be able to read the small voltage generated by the thermocouple junction, the irons output must be turned off.
-Once the output is turned off (via the FET), the system has a recovery time as the tip capacitance discharges and the op-amp exits saturation. After this delay period, the STM32 ADC samples the output of the op-amp 8 times quickly and then sets a flag to turn the PWM output back on.
-This enforces a small dead time in the output signal while this occurs, so there is a balance between sampling the temperature often to maintain stable tip temperature control and sampling less often to increase the maximum power deliverable to the tip
+To measure the tip temperature in the iron, the iron has a small op-amp connected across the terminals at the cold end of the tip. This is setup to measure the voltage across the same terminals that are used to power the tip. In order to read the very small voltage generated by the [thermocouple cold junction](https://ralim.github.io/IronOS/Temperature/), the iron's output must be turned off for a moment.
+                                                                                                                                                                                                             
+Once the output is turned off (via the FET), the system has a recovery time as the tip capacitance discharges and the op-amp exits saturation. After this delay period, the MCU's ADC (analog-to-digital converter) samples the output of the op-amp 8 times quickly and then sets a flag to turn the PWM output back on.
+This enforces a small dead time in the output signal while this occurs, so there is a balance between sampling the temperature often to maintain a stable tip temperature control and sampling less often to increase the maximum power deliverable to the tip ([see Complexity of measurement](https://ralim.github.io/IronOS/Temperature/#complexity-of-measurement)).
+
+
+
+## Power sources
+
+Supported by IronOS hardware may use different power sources (chargers/powerbanks/battery packs) with different standards & protocols (QC/PD/etc). For more information collected by the community on that, please, [see the related documentation section](https://ralim.github.io/IronOS/PowerSources/).

Documentation/PowerSources.md

@@ -0,0 +1,80 @@
+# Power sources
+
+Supported by IronOS hardware may use different power sources (chargers/powerbanks/battery packs) with different standards & protocols (QC/PD/etc). This document contains information collected by the community with tested power sources.
+
+This is not ads but first hands-on experience results from real users since some chargers/powerbanks regardless labels on the box may not fully support what's declared!
+
+
+## QC(3)
+
+
+### Compatible Devices (QuickCharge for TS80/P)
+
+The following table is the list of compatible device and remarks when powering up the TS80 through it for both stock firmware from MiniDso and IronOS. The list of devices below are primarily taken from [#349](https://github.com/Ralim/ts100/issues/349#issuecomment-449559806)
+
+| Device Name | Stock FW | IronOS FW |
+|-------------|:--------:|:---------:|
+| Anker PowerCore II Slim 10000 Powerbank | Not Working | Good |
+| [Aukey 26.5/30 Ah Powerbank (PB-Y3)](https://www.aukey.com/products/30000mah-power-bank-with-quick-charge-3-0/) | OK\*\* (15sec t/o) | OK\*\* (15sec t/o) |
+| Aukey QC3 Charger | Good | Only 5V |
+| [Aukey QC3 Charging Station (PA-T11)](https://www.aukey.com/products/6-port-charging-station-with-quick-charge-3-0-pa-t11/) | Good | Good |
+| Besiter 20000mah QC3 | Not Working | Only 5V |
+| BlitzWolf BW-P5 | Not Working\* | Unknown |
+| BlitzWolf BW-PF2 | OK\*\* (10sec t/o) | OK\*\* (10sec t/o) |
+| BlitzWolf BW-PL3 | Low Voltage | OK |
+| BlitzWolf BW-PL4 | Unknown | Not Working |
+| BlitzWolf BW-S6 | Unknown | OK |
+| Charmast 20800 mAh QC 3.0 | Low Voltage\* | Good |
+| Clas Ohlson Powerbank USB-C 10050 mAh, Clas Ohlson | Unknown | OK\*\* |
+| [Cygnett 20,000mAh USB-C](https://www.cygnett.com/products/20-000mah-usb-c-power-bank-in-black)| Not Working | Good |
+| [HAME H13D](https://www.amazon.com/dp/B07GWMFW82) 10000mAh PD/QC3.0 Power Bank | OK\*\* (30sec t/o) | OK\*\* (30sec t/o?) |
+| HIPER 10000 mAh 18W PD+QC3.0 (MPX10000) | Low Voltage | OK\*\* (30sec t/o) |
+| [iMuto Portable Charger 30000mAh](https://www.amazon.com/gp/product/B01MXCMGB8/ref=ppx_yo_dt_b_asin_title_o05_s00) | Low Voltage | Good |
+| ISDT BG-8S | Good | Good |
+| [iVoler Quick Charge 3.0 USB C 30W 2-Port USB](https://www.amazon.de/dp/B077P8ZZB8/) | Good | Good |
+| [imuto X6L Pro 30000 mah](https://www.amazon.com/dp/B01MXCMGB8) | Not Working | Bad |
+| Interstep 10000 mAh 18W PD+QC3.0+FCP+AFC (MPX10000) | Good | OK\*\* (30sec t/o) |
+| Jackery Black 420 | Low Voltage | Good |
+| Kogan Premium 80W 5 Port USB Charger| Low Voltage | Good |
+| Nokia AD-18WE | Unknown | OK |
+| [Omars 2000mAh USB-C PD+QC3.0 (OMPB20KBUPLT / OMPB20KPLT)](https://www.amazon.com/dp/B07CMLVR6C) | OK\*\* (20sec t/o) | Unknown |
+| Polaroid PS100 Powerbank (https://polaroid.com/products/ps100) | Good | Good |
+| Xiaomi 10000mAh Mi Power Bank Pro (PLM03ZM) | Good | Unknown |
+| Xiaomi 10000mAh Mi Power Bank 2i (PLM09ZM) | Good | Good |
+| Xiaomi 20000mAh Mi Power Bank 3 (PLM07ZM) | Unknown | Good Type A, Bad Type C |
+| [ZeroLemon ToughJuice](https://www.amazon.com/dp/B01CZR3LT2/) 30000mAh PD/QC2.0 Power Bank | OK\*\* (20sec t/o) | OK\*\* (20sec t/o?) |
+| [URUAV XT-60 to USB module](https://www.banggood.com/URUAV-XT-60-to-USB-Charger-Converter-Support-3S-6S-LiPo-Battery-10_5V-32V-Input-3V-20V-Output-45W-Max-Fast-Charging-Adapter-For-RC-Racing-Drone-p-1475876.html) | Unknown | Good |
+
+
+\* Need further tests on newer firmware
+
+\*\* Most Power Banks shut down if current draw drops below 50mA, assuming that charging is complete and avoiding overcharging. Custom firmware is designed to avoid this until it enters Zzzz mode.
+
+
+### DIY QC3.0
+
+You may also build your own QC3.0 power source that requires this little [thing](https://www.tindie.com/products/soubitos/qualcomm-qc2-3-diy-8-32vin-36-12vout-3a-max/) and have at least 3S lithium packs or any input voltage from 8 to 32V.
+
+You can also go for an [alternate module](https://www.banggood.com/DC-Buck-Module-12V24V-to-QC3_0-Single-USB-Mobile-Charging-Board-p-1310585.html) which has at least one good review of it.
+
+**DISCLAIMER:** _**We do not hold any responsibility for accidents that happen when building your own QC3.0 power source!!!**_
+
+
+## PD
+
+The following additional table is the list of devices compatible with hardware which requires Power Delivery support (>= 30W). Devices from the list have been successfully tested & used with TS80P in PD mode. Please, keep in mind that:
+
+- PD can be provided only through usb-c <-> usb-c cable;
+- not only a charger but a cable itself should be capable to carry higher wattages.
+
+
+### Compatible Devices (PowerDelivery for TS80P)
+
+| Device Name | IronOS FW |
+|-------------|:---------:|
+| Traver Charger QC09 (45W max)\* | OK |
+| Xiaomi AD65GEU Mi 65W Fast Charger with GaN Tech (AD65GEU, 65W max) | OK |
+
+\* Comes as an _option_ for extra price in the package with TS80P from [official store](https://aliexpress.com/item/4000764937427.html) or from [NovelLife store separately](https://aliexpress.com/item/4001316262433.html) on AliExpress.
+
+Please, DO NOT BUY cheap "fast chargers with QC/PD support" for a few dollars online (i.e., less than ~10$): if you check reviews, then you see that they are phonies - even if you get lucky, you probably get 5V/1A max from them.

Documentation/README.md

@@ -0,0 +1,32 @@
+
+<!-- THIS FILE IS AUTOGENERATED by "scripts/deploy.sh docs_readme" based on nav section in scripts/IronOS-mkdocs.yml config -->
+<!-- THIS FILE IS NOT SUPPOSED TO BE EDITED MANUALLY -->
+
+#### This is autogenerated README for brief navigation through github over official documentation for IronOS project
+#### This documentation is also available [here online](https://ralim.github.io/IronOS)
+
+  - [Home](../Documentation/index.md)
+  - [Getting Started](../Documentation/GettingStarted.md)
+  - Flashing the firmware
+      - [MHP30](../Documentation/Flashing/MHP30.md)
+      - [Pinecil V1](../Documentation/Flashing/Pinecil%20V1.md)
+      - [Pinecil V2](../Documentation/Flashing/Pinecil%20V2.md)
+      - [TS80(P)](../Documentation/Flashing/TS80(P).md)
+      - [TS100](../Documentation/Flashing/TS100.md)
+  - Operation
+      - [Main Menu](../Documentation/Menu.md)
+      - [Settings](../Documentation/Settings.md)
+      - [Debug Menu](../Documentation/DebugMenu.md)
+      - [Power](../Documentation/Power.md)
+      - [Temperature](../Documentation/Temperature.md)
+  - [Startup Logo](../Documentation/Logo.md)
+  - Hardware
+      - [Hall Sensor (Pinecil)](../Documentation/HallSensor.md)
+      - [Bluetooth (Pinecil V2)](../Documentation/Bluetooth.md)
+      - [Hardware Notes](../Documentation/Hardware.md)
+      - [Troubleshooting](../Documentation/Troubleshooting.md)
+      - [Known Hardware Issues](../Documentation/HardwareIssues.md)
+      - [Power sources](../Documentation/PowerSources.md)
+  - [Translations](../Documentation/Translation.md)
+  - [Development](../Documentation/Development.md)
+  - [Changelog](../Documentation/History.md)

Documentation/Settings.md

@@ -0,0 +1,321 @@
+<!-- This is an automatically generated file. DO NOT EDIT. Edit gen_menu_docs.py instead -->
+
+# IronOS Settings Menu
+
+The below breaks down the menu's and what each setting means.
+    
+## Menu Categories
+
+In the menu there are a few main categories that are used to keep the list manageable.
+
+### Category: Power settings
+
+Menu for settings related to power. Main settings to do with the input voltage.
+
+### Category: Soldering settings
+
+Settings for soldering mode, such as boost temps, the increment used when pressing buttons and if button locking is enabled.
+
+### Category: Sleep mode
+
+Settings to do with power saving, such as sleep mode, sleep temps, and shutdown modes.
+
+### Category: User interface
+
+User interface related settings, such as units.
+
+### Category: Advanced settings
+
+Advanced settings. Misc catchall for settings that don't fit anywhere else or settings that require some thought before use.
+
+## Settings
+
+These are all of the settings possible in the menu.
+**Not all settings are visible for all devices.**
+For example, the TS100 does not have USB-PD settings.
+
+When using the device, if unsure you can pause (press nothing) on a setting and after a short delay help text will scroll across the screen.
+This is the "on device help text".
+
+### Setting: Power source
+
+When the device is powered by a battery, this adjusts the low voltage threshold for when the unit should turn off the heater to protect the battery.
+
+On device help text:
+
+Set cutoff voltage to prevent battery over-drain. (DC 10V) (S=3.3V per cell, disable PWR limit)
+
+### Setting: Sleep temp
+
+Temperature the device will drop down to while asleep. Typically around halfway between off and soldering temperature.
+
+On device help text:
+
+Tip temperature while in "sleep mode"
+
+### Setting: Sleep timeout
+
+How long of a period without movement / button-pressing is required before the device drops down to the sleep temperature.
+
+On device help text:
+
+Interval before "sleep mode" starts (s=seconds | m=minutes)
+
+### Setting: Shutdown timeout
+
+How long of a period without movement / button-pressing is required before the device turns off the tip heater completely and returns to the main idle screen.
+
+On device help text:
+
+Interval before the iron shuts down (m=minutes)
+
+### Setting: Motion sensitivity
+
+Scale of how sensitive the device is to movement. Higher numbers == more sensitive. 0 == motion detection turned off.
+
+On device help text:
+
+0=off | 1=least sensitive | ... | 9=most sensitive
+
+### Setting: Temperature unit
+
+If the device shows temperatures in °C or °F.
+
+On device help text:
+
+C=Celsius | F=Fahrenheit
+
+### Setting: Detailed idle screen
+
+Should the device show an 'advanced' view on the idle screen. The advanced view uses text to show more details than the typical icons.
+
+On device help text:
+
+Display detailed info in a smaller font on idle screen
+
+### Setting: Display orientation
+
+If the display should rotate automatically or if it should be fixed for left- or right-handed mode.
+
+On device help text:
+
+R=right-handed | L=left-handed | A=automatic
+
+### Setting: Boost temp
+
+When the unit is in soldering mode. You can hold down the button at the front of the device to temporarily override the soldering temperature to this value. This SETS the temperature, it does not ADD to it.
+
+On device help text:
+
+Tip temperature used in "boost mode"
+
+### Setting: Start-up behavior
+
+When the device powers up, should it enter into a special mode. These settings set it to either start into soldering mode, sleeping mode or auto mode (Enters into soldering mode on the first movement).
+
+On device help text:
+
+O=off | S=heat to soldering temp | Z=standby at sleep temp until moved | R=standby, heat-off until moved
+
+### Setting: Cooldown flashing
+
+If the idle screen should blink the tip temperature for attention while the tip is over 50°C. Intended as a 'tip is still hot' warning.
+
+On device help text:
+
+Flash temperature reading at idle if tip is hot
+
+### Setting: Calibrate CJC at next boot
+
+Note:
+If the difference between the target temperature and the measured temperature is less than 5°C, **calibration is NOT required at all**.
+
+This is used to calibrate the offset between ADC and Op-amp of the tip **at next boot** (Ideally it has to be done at boot, before internal components get warm.). If the checkbox is set, the calibration will only be performed at the next boot. After a successful calibration the checkbox will be unchecked again! If you need to repeat the calibration however, you have to set the checkbox *again*, unplug your device and let it cool down to room/ambient temperature & power it up, ideally while it sits on the desk.
+
+Also, the calibration will only take place if both of the following conditions are met:
+- The tip must be installed.
+- The temperature difference between tip and handle must be less than 10°C. (~ ambient / room temperature)
+
+Otherwise, the calibration will be performed the next time the device is started and both conditions are met, unless the corresponding checkbox is unchecked.
+
+Hence, never repeat the calibration in quick succession!
+
+On device help text:
+
+Calibrate tip Cold Junction Compensation at the next boot (not required if Delta T is < 5°C)
+
+### Setting: Restore default settings
+
+Resets all settings and calibrations to factory defaults. Does NOT erase custom user boot up logo's.
+
+On device help text:
+
+Reset default settings for this firmware ver.
+
+### Setting: Calibrate input voltage
+
+Enters an adjustment mode where you can gradually adjust the measured voltage to compensate for any unit-to-unit variance in the voltage sense resistors.
+
+On device help text:
+
+Start VIN calibration (long press to exit)
+
+### Setting: Detailed solder screen
+
+Should the device show an 'advanced' soldering view. This is a text-based view that shows more information at the cost of no nice graphics.
+
+On device help text:
+
+Display detailed info in a smaller font on soldering screen
+
+### Setting: Scrolling speed
+
+How fast the description text scrolls when hovering on a menu. Faster speeds may induce tearing, but allow reading the whole description faster.
+
+On device help text:
+
+Speed info text scrolls past at (S=slow | F=fast)
+
+### Setting: QC voltage
+
+This adjusts the maximum voltage the QC negotiation will adjust to. Does NOT affect USB-PD. Should be set safely based on the current rating of your power supply.
+
+On device help text:
+
+Max QC voltage the iron should negotiate for
+
+### Setting: PD timeout
+
+How long until firmware stops trying to negotiate for USB-PD and tries QC instead. Longer times may help dodgy / old PD adapters, faster times move onto PD quickly. Units of 100ms. Recommended to keep small values.
+
+On device help text:
+
+PD negotiation timeout in 100ms steps for compatibility with some QC chargers
+
+### Setting: Power limit
+
+Allows setting a custom wattage for the device to aim to keep the AVERAGE power below. The unit can't control its peak power no matter how you set this. (Except for MHP30 which will regulate nicely to this). If USB-PD is in use, the limit will be set to the lower of this and the supplies advertised wattage.
+
+On device help text:
+
+Maximum power the iron can use (W=watt)
+
+### Setting: Swap + - keys
+
+Swaps which button increments and decrements on temperature change screens.
+
+On device help text:
+
+Reverse assignment of buttons for temperature adjustment
+
+### Setting: Temp change short
+
+Factor by which the temperature is changed with a quick press of the buttons.
+
+On device help text:
+
+Temperature-change-increment on short button press
+
+### Setting: Temp change long
+
+Factor by which the temperature is changed with a hold of the buttons.
+
+On device help text:
+
+Temperature-change-increment on long button press
+
+### Setting: Power pulse
+
+Enables and sets the wattage of the power pulse. Power pulse causes the device to briefly turn on the heater to draw power to avoid power banks going to sleep.
+
+On device help text:
+
+Intensity of power of keep-awake-pulse (watt)
+
+### Setting: Hall sensor sensitivity
+
+If the unit has a hall effect sensor (Pinecil), this adjusts how sensitive it is at detecting a magnet to put the device into sleep mode.
+
+On device help text:
+
+Sensitivity to magnets (0=off | 1=least sensitive | ... | 9=most sensitive)
+
+### Setting: Allow locking buttons
+
+If locking the buttons against accidental presses is enabled.
+
+On device help text:
+
+While soldering, hold down both buttons to toggle locking them (D=disable | B=boost mode only | F=full locking)
+
+### Setting: Minimum voltage
+
+When powered by a battery, this adjusts the minimum voltage per cell before shutdown. (This is multiplied by the cell count.)
+
+On device help text:
+
+Minimum allowed voltage per battery cell (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)
+
+### Setting: Anim. loop
+
+Should the menu animations loop. Only visible if the animation speed is not set to "Off"
+
+On device help text:
+
+Loop icon animations in main menu
+
+### Setting: Anim. speed
+
+How fast should the menu animations loop, or if they should not loop at all.
+
+On device help text:
+
+Pace of icon animations in menu (O=off | S=slow | M=medium | F=fast)
+
+### Setting: Power pulse delay
+
+Adjusts the time interval between power pulses. Longer gaps reduce undesired heating of the tip, but needs to be fast enough to keep your power bank awake.
+
+On device help text:
+
+Delay before keep-awake-pulse is triggered (x 2.5s)
+
+### Setting: Power pulse duration
+
+How long should the power pulse go for. Some power banks require seeing the power draw be sustained for a certain duration to keep awake. Should be kept as short as possible to avoid wasting power / undesired heating of the tip.
+
+On device help text:
+
+Keep-awake-pulse duration (x 250ms)
+
+### Setting: Language:  EN     English
+
+Changes the device language on multi-lingual builds.
+
+On device help text:
+
+Current firmware language
+
+### Setting: Screen brightness
+
+Display brightness. Higher values age the OLED faster due to burn-in. (However, it is notable that most of these screens die from other causes first.)
+
+On device help text:
+
+Adjust the OLED screen brightness
+
+### Setting: Invert screen
+
+Inverts the entire OLED.
+
+On device help text:
+
+Invert the OLED screen colors
+
+### Setting: Boot logo duration
+
+Sets the duration for the boot logo (s=seconds).
+
+On device help text:
+
+Set Boot logo duration (off | s=seconds | infinity)

Documentation/Temperature.md

@@ -0,0 +1,60 @@
+# Tip temperature measurement
+
+The soldering irons use a modified N-type thermocouple in the tip to measure the tip temperature.
+This is constructed for free by using a different type of metal to join one of the rings to the heating coil. This effectively creates a free temperature sensor for very low cost and construction difficulty.
+
+The downsides of this are twofold; one, it is made using non-optimal metals and has a non-constant temperature response; and two, as this uses the same connections as the heating current, you can't measure the temperature while you are heating the tip.
+
+
+
+##  How a thermocouple works (brief)
+
+[Thermocouples use a junction of two dissimilar metals](https://www.youtube.com/watch?v=v7NUi88Lxi8) to create a very small amount of power (microvolts). This can then be measured and used with a known transfer function to derive the temperature of the junction.
+This has some fairly large limitations, but it also has the benefit of being extremely cheap.
+
+Conventionally a thermocouple is created using two dissimilar metals that join, and then the other ends of these metals are terminated to copper contacts. These copper contacts are also part of the construction of the thermocouple and are referred to as the cold junction.
+As there are these extra two joins between the thermocouple wires and the copper; these also have properties of their own in their reactions with temperature.
+
+If the cold junction is held at 0 degrees Celsius, then their effect is considered to be null, and so they can be ignored. However, in the real world the joins to copper are often at room temperature, and as such the measured voltage from the thermocouple must be compensated to remove the influence of these joints. This process is often called cold junction compensation.
+
+Every time in the circuit there is a join between two different metals, then a small thermocouple is created, this means that _every_ soldered connection is also one. 
+
+
+## How these irons implement the temperature reading
+
+If you analyse one of the open circuit schematics (Pinecil, TS100, TS80) they all use the same approximate formula.
+This consists of an op-amp that is connected directly across the heating connections to the tip, and a separate handle temperature sensor.
+
+When the iron is **not** heating the tip, the microcontroller uses the ADC to read the output from the op-amp. This produces a voltage that _should_ be linear to the temperature of (tip-handle). This value is then offset compensated (to remove ADC+op-amp offsets), and then converted into a temperature delta in °C/K. This temperature delta can then be added to the handle temperature to derive the tip temperature in degrees Celsius.
+
+Depending on the construction of the tip, the lookup values used for converting the tip reading in µV into °C/K varies. It is worth noting, however, that TS100 and Pinecil tips are approximately the same as the Hakko T12 tips. (In @Ralim's testing, to within measurement error). This makes sense as the T12 tips are an excellent and cheap design for Miniware to mimic in making the TS100 in the first place.
+
+## Implications of this
+
+### Reading accuracy vs Heating performance tradeoff
+
+Because the tip can only be measured when the unit is not heating, the more often the tip is measured (for finer temperature control) the less time the unit can spend heating up the tip. This means that for fast heat up and fine temperature control the firmware now implements two speeds to the controller loop. During heating up the system runs fewer temperature measurements and instead allows the tip to spend more time burning power. Once the unit is up to temperature, the rate of taking temperature readings is doubled to allow for faster reaction times.
+
+### Tip heat up lag time
+
+As the temperature sensor is a part of the heater coil inside of the tip (or very close by, not entirely certain); the temperature reading is of the _inside_ of the tip, rather than the outside. The outside temperature is the most critical for the user as this is where the solder is actually melting and performing work.
+
+The PID controller in the firmware is tuned to be slightly underdamped and thus more "jumpy" than some people would expect. This is based on the theory that if the inside of the tip is seeing the temperature drop; the outside temperature has dropped more and so we should overcompensate until they equalise.
+
+This is why sometimes the temperature may flick around a little during use but the tip temperature itself is quite stable. The thermal mass of the tip smooths these small amounts out nicely for the user. Though seeing larger jumps on some tips than others _may_ indicate that the tip does not have optimal internal thermal bonding between the heater coil and the tip itself.
+
+The firmware uses the theory that these irons are aimed more to the power users territory than most, so it tries to _not_ hide the actual temperature. Some soldering iron controllers hide the actual measurement once you are within a certain tolerance of this. For example, on a digital Weller unit that Ralim has, if set to 350 °C, it will regulate to within around +/- 3°C but not indicate you are outside of the margin of error until you exceed +/- 5°C. This gives the illusion that it's holding the temperature perfectly when in actuality it's moving around as well.
+
+Given enough time (3-5 seconds) with no external cooling, the inside and outside temperatures of the tip will be equal. When testing the tip temperature accuracy try to allow time for the system to stabilise.
+
+### Complexity of measurement
+
+The firmware in these irons does a *best-effort* of calculating an accurate temperature. As always there is a tradeoff between perfect accuracy and firmware complexity and setup. These irons are built down to a cost; expecting accuracy greater than 1% is not really an option as the voltage reference is only 1% accurate at best. So _all_ measurements are affected by its accuracy. The low-cost chips used in the irons do not come calibrated from the factory so we do not have an internal calibration we can use to try and measure this inaccuracy.
+
+The firmware only accounts for [cold junction compensation](https://www.tegam.com/what-exactly-is-cold-junction-compensation/) and then treats the remaining error as being a constant offset. 
+While the error is small, it is actually composed of both a constant offset as well as an offset that is linear to the handle temperature.
+This offset that is linear to handle temperature is as of current not modelled into the firmware and is assumed to be constant. This is generally *close enough* as once the unit is in use, the handle temperature is usually within 10 °C as the components inside warm-up from use. This means that this error is "relatively" constant once the unit is being used. 
+
+`However, this can cause odd behaviour when the tip temperature ~= room temperature. It can cause some jumping and movement in the readings when attempting to control the tip to sub 100 °C.`
+
+This is a known tradeoff that is made as the irons intended use case means that it will spend most of its time above 150 °C, at which point these errors are no longer the dominant error sources in the system.

Documentation/Translation.md

@@ -1,6 +1,12 @@
 # Translation
-If you would like to contribute a translation, use the [Translation Editor](http://htmlpreview.github.io/?https://github.com/Ralim/ts100/blob/master/Translation%20Editor/TranslationEditor.html).
 
-[Open a reference language file and optionally a target language file](https://github.com/Ralim/ts100/tree/master/Translation%20Editor).
+At the present time the main way of performing translations is to open a PR to this repository.
+All translations are stored as `json` files in the repository. Currently there is ongoing work to look into a more user friendly method of editing translations than these but for now these are reliable.
 
 You can create a pull request with the new / updated json configuration file, and this will include this language into the new builds for the firmware.
+
+For testing you can build locally and test of course; but if you dont want to figure out the build environment; you can just open a PR and github will build the firmware for you using the _actions_ feature.
+
+This means that once you have a github account you can perform all of your edits inside Github should this be desired.
+
+Translations are _NOT_ accepted via issues/discussions or email.

Documentation/Troubleshooting.md

@@ -0,0 +1,105 @@
+# Troubleshooting
+
+If your device is not operating as expected; and you are within the manufacturer support window, please first contact your manufacturer and RMA / warranty your device.
+
+If your iron is not working as expected, [the Debug menu](https://ralim.github.io/IronOS/DebugMenu/) exposes internal measurements to help you narrow down the root cause of the issue.
+
+Alongside all of these, issues with the soldering of the main MCU could cause all of these as well; and should always be checked.
+
+The tip is important for the operation of your iron. T100 and Pinecil tips are around 8 ohms, and TS80(P) tips are around 4.5 ohms.
+
+You are welcome to open discussions about issues as well, or if you bought your Pinecil from an official store; use the [Pinecil community chat](https://wiki.pine64.org/wiki/Pinecil#Community_links) for support.
+But it is helpful to do some basic diagnostics first just in case the issue is easily fixed.
+
+The **VAST** majority of issues are poor soldering or cold solder joints.
+If you can open up your iron, give it a good look at all the connection points, and use another iron to reflow any suspicious ones, this can fix most issues.
+
+## Tip Shorted warning
+
+If you are powering up a device that supports tip resistance detection (TS101 and Pinecilv2 as of present), the firmware checks the readings of the raw tip resistance and sorts these into three "bins". `8 ohm tips`, `6.2 ohm tips` and `tip-shorted`. The tip resistance is used when negotiating USB-PD and in thermal calculations.
+The `tip-shorted` option is selected if your tip is measured to be abnormally small. This could indicate a failed driver mosfet or a failed tip.
+
+When this warning is shown; heating will be disabled to protect from damage. As trying to heat a shorted tip can damage the iron itself.
+
+It is best to take out your tip and manually measure and verify the tip's resistance. It should be 6-8 ohms (depending on tip type). When measuring resistances this small some multimeters can struggle. If you have access to a current limited bench power supply, you can try doing a 4 wire measurement by measuring the voltage drop on the tip while applying a known current. `(R=V/I)`.
+
+If the tip measures correctly you may have a damaged driver mosfet; it would be ideal to open your iron and test the mosfet is operating correctly.
+If after both of these checks everything looks as expected, feel free to open a discussion on IronOS to talk about the issue (Or for Pinecil the community chat can be a much faster response).
+
+## High tip temp reading when the tip is cool
+
+If you are finding the tip is reading high; the first fields to check in the Debug menu are `RTip` and `CHan`.
+
+- `RTip` is the raw tip reading in μV; at cool this should be around 700-1000 for larger tips and ~1500 for smaller tips (TS80's)
+- `CHan` is the temperature of the temperature sensor on the PCB in degrees Celsius \* 10. So 29 °C ambient should read as 290
+
+### RTip is out of spec
+
+`RTip` will over-read on bad contacts or no tip inserted.
+
+If `RTip` is overreading, you may have one of the following:
+
+- Partially stuck on main MOSFET
+- Slow reacting main MOSFET driver transistor
+- Damaged Op-Amp
+- Poor soldering on the Op-Amp circuitry
+- No tip inserted or tip that is not connecting correctly
+
+If `RTip` is under-reading you most likely have issues with the Op-Amp or the tip. The signal should be pulled high by hardware (reading hot), so this often means the MCU is not reading the signal correctly. Check MCU soldering.
+
+### CHan is out of spec
+
+CHan reading comes directly from the cold junction compensation temperature sensor.
+This is usually a TMP36 (Pinecil V1), or an NTC thermistor (MHP30, TS80P, Pinecil V2).
+
+If `CHan` is reading low:
+
+- Check the connection from the MCU to the handle temperature sensor.
+- Check the power pin connection on the TMP36
+- Check pullup resistor on the NTC thermistor
+- Check no bridged pins or weak shorts on the signal to nearby pins on MCU or temperature sensor
+- Reflow/resolder the aforementioned components
+
+If `CHan` is reading higher
+
+- Check ground connections on the sensors
+- Check no bridged pins or weak shorts on the signal to nearby pins on MCU or temperature sensor
+- Reflow/resolder the aforementioned components
+
+## No display OR dots on the display
+
+If when you power up your iron you get no display, the first test is to (carefully) attempt to heat the tip.
+Press the front button (`+/A`) on your device and check if the tip heats up.
+If the tip does not heat up, it is worth trying to reflash the firmware first in case it is corrupted.
+
+The main failure mode of the OLED display module is usually poor soldering on the OLED display cable to the main PCB.
+As this is soldered by hand generally, it's the most prone to failures.
+
+If you have a poor connection or a floating pin, you can end up with a state where the screen works _sometimes_ and then freezes or only works on some power cycles. It might work on very old versions of IronOS but not the newest ones. You could try to reflow the pins for the OLED. On 96x16 screens, carefully peel it back from the adhesive and reflow the solder on the pins.
+
+As the OLED runs on an I2C bus, there are pull up resistors on the SDA and SCL pins. It is worth checking these as well, while they don't often fail, issues with these can cause _weird_ display issues.
+
+If after all of the checks OLED is still blank, or screen works but pixels are barely visible, although soldering iron itself is working (i.e., you can safely check that it's turning on, heating up & melting solder successfully), then it means that _most likely_ OLED is dead. But it can be relatively easily replaced. Models like `TS100`, `TS80`, and `TS80P` share the same OLED screen which can be bought online and used for replacement. To do so:
+
+- find & buy at electronics shop [of your choice] display with the following spec line:  
+```OLED 0.69 inch / 14 pins / 96 x 16 pixels / **9616TSWC** / I2C IIC```
+
+- disassemble your soldering iron;
+- desolder old OLED and solder back new one;
+- assemble your soldering iron back.
+
+There are a few youtube videos how to do it like [this one for `TS100`](https://www.youtube.com/watch?v=HlWAY0oYPFI).
+
+Unfortunately, this is a well-known issue of screens with OLED technology: sooner or later the brightness is starting to _"fade out"_ until complete off. Usually common recommendations to prolong its lifetime are: reduce brightness & reduce too often updates (i.e., disable animations). But your results may vary since there were reports when users couldn't see anything after turning on soldering irons which were just laying in a box for a few months after buying. And there are users with first `TS100` models not having any issues with display at all.
+
+## Tip heats when not in heating mode
+
+⚠️ DISCONNECT YOUR TIP ⚠️
+
+Most likely you have either a blown MOSFET or shorted pin.
+Check the MOSFET and also its driver transistor.
+The firmware will not enable the tip until you are in soldering mode.
+
+## Accelerometer not detected
+
+Your Iron may have a new accelerometer that is not supported yet (happens every year or so) OR there is a soldering issue with the accelerometer (reflow/resolder).

Documentation/Upgrading.md

@@ -1,72 +0,0 @@
-# Upgrading your iron
-
-## Miniware irons (TS100, TS80, TS80P)
-
-This is completely safe, but if it goes wrong just put the .hex file from the official website onto the unit and you're back to the old firmware. Downloads for the hex files to flash are available on the [releases page.](https://github.com/Ralim/ts100/releases) The file you want is called *(MODEL)_EN.hex* unless you want the translations, they are (MODEL)_*language short name*.hex. Where (MODEL) is either TS100 or TS80.
-
-Officially the bootloader on the iron only works under Windows (use the built-in File Explorer, as alternative file managers or copy handlers like Teracopy will fail). However, users have reported that it does work under Mac, and can be made to work under Linux *sometimes*. Details over on the [wiki page](https://github.com/Ralim/ts100/wiki/Upgrading-Firmware). 
-
-
-
-1. Hold the button closest to the tip, and plug in the USB to the computer.
-2. The unit will appear as a USB drive.
-3. Drag the .hex file onto the USB drive.
-4. The unit will disconnect and reconnect.
-5. The filename will have changed to end in .RDY or .ERR
-6. If it ends with .RDY you're done! Otherwise, something went wrong.
-7. If it didn't work the first time, try copying the file again without disconnecting the iron, often it will work on the second shot.
-8. Disconnect the USB and power up the iron. You're good to go.
-
-
-
-For the more adventurous out there, you can also load this firmware onto the device using an SWD programmer.
-
-On the bottom of the MCU riser PCB, there are 4 pads for programming. On v2.51A PCB revision `USB_D+` is shorted to `SWDIO` and `USB_D-` is shorted to `SWCLK` so debugging works without disassembly (attach while staying in the bootloader). Installing [dapboot from eDesignOSS](https://github.com/eDesignOSS/dapboot) (`make TARGET=TS100 -C src`) is recommended as it allows reliable flashing of binary files with [dfu-util](http://dfu-util.sourceforge.net/).
-
-There is a complete device flash backup included in this repository. (Note this includes the bootloader, so will need an SWD programmer to load onto the unit).
-
-For the TS80 the SWD pins are used for the QC negotiation, so you can actually connect to the SWD power via the USB connector.
-
-
-### FAQ
-
-#### The file is showing up with the extension `.ERR`
-
-This can occur duing the programming process if any of the checks in the bootloader fail. This is often triggered by anti-virus software or using a non-windows host OS.
-
-First, try just copying the file a second time.
-
-1. Attach the iron in DFU mode
-2. Copy the hex file to the device
-3. The device disconnects and connects with the `.ERR` file
-4. Copy the same hex file again  **DO NOT TRY AND DELETE THE OLD ONE**
-5. The device will disconnect and reconnect again
-6. The device _should_ now have the `.RDY` file
-7. Your done.
-
-If this fails, if you are on Mac or Linux reading the wiki page about programming can help. There is also a very long issue thread going through all of the different attempts around this too.
-
-If you are on windows, its often to try another computer (friends, work, partners etc).
-
-#### Device randomly disconnects or does not show up in DFU mode
-
-First, check the USB cable your using has the data pins; test it on another device. There are a surprisingly large number of usb-micro cables that are power _only_.
-
-Secondly, try other USB ports. Often different USB controllers will interact with the units differently due to design quirks in the miniware design.
-
-## Setting a custom bootup image
-
-This firmware uses a different method of updating the bootup image.
-This removes the need for emulating a USB drive on the iron just to allow for a bootup image to be setup.
-There are further instructions on the [wiki](https://github.com/Ralim/ts100/wiki/Logo-Editor).
-Instructions are kept on the wiki so that users can update the information if they find extra helpful information.
-
-## Alternative bootloader
-
-If you are an advanced user, and you have used `usb-dfu` tools before, or you would like to learn; there is an alternative bootloader for these irons.
-This will **NOT** show up as a USB storage drive, but instead show up using a standard DFU protocol device. You can then use dfu tools or GUI's to upgrade the iron using the `.bin` files that are posted to the releases page.
-
-To change to dapboot based alternative bootloader, you need to flash the hex file from [here](https://github.com/eDesignOSS/ts100-bl-flasher/releases).
-`ts100-stockbl.hex` will reflash the stock bootloader, `ts100-dapboot.hex` will flash the new dapboot based usb bootloader.
-
-Note that this is only reccomended for users who know what they doing. If you dont not understand how this works; please dont flash this.

Documentation/index.md

@@ -0,0 +1,100 @@
+# IronOS - Flexible Soldering iron control Firmware
+
+The firmware implements all of the standard features of a 'smart' soldering iron, with lots of little extras and tweaks.
+I highly recommend reading the installation guide fully when installing on your iron. And after install just explore the settings menu.
+
+For soldering irons that are designed to be powered by 'smart' power sources (PD and QC), the firmware supports settings around the negotiated power and voltage.
+For soldering irons that are designed to be powered by batteries (TS100 & Pinecil), settings for a cutoff voltage for battery protection are supported.
+
+Currently **31** languages are supported. When downloading the firmware for your soldering iron, take note of the language code in the file name.
+
+This project is considered stable & feature complete for everyday use with a supported device, _so please suggest any feature improvements you would like!_
+
+_This firmware does **NOT** support the USB port while running for changing settings. This is done through the onscreen menu only. Logos are edited on a computer and flashed like firmware._
+
+|   Device   | DC  | QC  | PD  | EPR | BLE | Battery | Recommended |
+| :--------: | :-: | :-: | :-: | :-: | :-: | :-----: | :---------: |
+|   MHP30    | ❌  | ❌  | ✔️  | ❌  | ❌  |   ❌    |     ✔️      |
+| Pinecil V1 | ✔️  | ✔️  | ✔️  | ❌  | ❌  |   ✔️    |     ✔️      |
+| Pinecil V2 | ✔️  | ✔️  | ✔️  | ✔️  | ✔️  |   ✔️    |     ✔️      |
+|   TS80P    | ❌  | ✔️  | ✔️  | ❌  | ❌  |   ✔️    |     ✔️      |
+|   TS100    | ✔️  | ❌  | ❌  | ❌  | ❌  |   ✔️    |     ❌      |
+|    TS80    | ❌  | ✔️  | ❌  | ❌  | ❌  |   ✔️    |     ❌      |
+
+\*Please note that Miniware started shipping TS100's using cloned STM32 Chips. While these do work with IronOS, their DFU bootloader works terribly, and it is hard to get it to successfully flash larger firmware images like IronOS without timing out. This is the main reason why the TS100 is **_no longer recommended_**.
+
+## Getting Started
+
+To get started with IronOS firmware, please jump to [Getting Started Guide](https://ralim.github.io/IronOS/GettingStarted/).
+But the [TL;DR](https://www.merriam-webster.com/dictionary/TL%3BDR) is to press the button near the front of the iron to heat up. Use the button near the back of the iron to enter the settings menu.
+Long hold the rear button in soldering mode to exit back to the start screen.
+
+## Installation
+
+For notes on installation for your device, please refer to the flashing guide for your device:
+
+- [MHP30](https://ralim.github.io/IronOS/Flashing/MHP30)
+- [Pinecil V1](https://ralim.github.io/IronOS/Flashing/Pinecil%20V1/)
+- [Pinecil V2](https://ralim.github.io/IronOS/Flashing/Pinecil%20V2/)
+- [TS80 / TS80P](https://ralim.github.io/IronOS/Flashing/TS80%28P%29/)
+- [TS100](https://ralim.github.io/IronOS/Flashing/TS100)
+
+But the _generic_ [TL;DR](https://www.merriam-webster.com/dictionary/TL%3BDR) is to:
+
+- [download firmware from here](https://github.com/Ralim/IronOS/releases) for the correct model with suitable language support;
+- put a device into DFU/bootloader mode (usually by keep holding A/+/front button while connecting a device to power source to power device on);
+- flash the firmware by drag-n-drop the firmware file using a file manager of your OS **or** using a separate flashing tool.
+
+## Key Features
+
+- PID style iron temperature control
+- Automatic sleep with selectable sensitivity
+- Motion wake support
+- All settings exposed in the intuitive menu
+- (TS100) Set a voltage lower limit for Lithium batteries so you don't kill your battery pack
+- (TS80) Set 18 W or 24 W settings for your power bank
+- (TS80P) Automatically negotiates appropriate PD and falls back to QC mode like TS80
+- (Pinecil) Supports all 3 power modes (PD, QC, DC In).
+- (Pinecilv2) Supports USB-PD EPR for 28V operation.
+- Improved readability Fonts, supporting multiple languages
+- Use hardware features to improve reliability
+- Can disable movement detection if desired
+- Boost mode lets you temporarily change the temperature when soldering (i.e. raise the temperature for short periods)
+- (TS100/Pinecil) Battery charge level indicator if power source set to a lipo cell count
+- (TS80/TS80P/Pinecil) Power bank operating voltage is displayed
+- [Custom boot up logo support](https://ralim.github.io/IronOS/Logo/)
+- Automatic LCD rotation based on the orientation
+
+## Menu System
+
+This new firmware uses a new menu system to allow access to the settings on the device.
+When on the main screen and having the tip plugged in, the unit shows a pair of prompts for the two most common operations.
+
+- Pressing the button near the tip enters the _soldering mode_
+- Pressing the button near the USB end enters the _settings menu_
+- When not in _soldering mode_, holding down the button near the tip will enter _soldering temperature adjust mode_ (This is the same as the one in the _soldering mode_, but allows to adjust the temperature before heating up), in _soldering mode_ however this will activate _boost mode_ as long as you hold down the button.
+- Holding down the button near the USB end will show the _[debug menu](https://ralim.github.io/IronOS/DebugMenu/)._ In _soldering mode_ this ends the heating.
+
+Operation details are over in the [Menu information.](https://ralim.github.io/IronOS/Menu/)
+
+## Feedback
+
+If you would like to:
+
+- report any issue related to IronOS
+- request a feature
+- provide some suggestion
+
+then you can [fill this form](https://github.com/Ralim/IronOS/issues/new/choose) using github account\*.
+
+And if you would like to:
+
+- ask more generic question about IronOS/supported hardware/something you're curious about/etc.
+- reach out community to chat with
+- share your soldering & DIY skills
+- share some interesting finding
+- share useful related hardware/software with others
+
+or _anything_ like that, then you can use forum-like [Discussions here](https://github.com/Ralim/IronOS/discussions).
+
+\*: You may need to create it first if you don't have one - it's free of charge.

Env.yml

@@ -0,0 +1,12 @@
+version: "3"
+name: "ironos"
+services:
+  builder:
+    stdin_open: true
+    tty: true
+    build:
+      context: .
+      dockerfile: scripts/IronOS.Dockerfile
+    command: /bin/sh
+    volumes:
+      - ./:/build/ironos:Z

ISSUE_TEMPLATE.md

@@ -1,31 +0,0 @@
-Please edit this template and fill out all the information you can (where relevant). Failure to provide essential information can delay the response you receive.
-
-_This is a [Bug/Feature Request/Question/Complaint]_
-
-* **I have**
-  - [ ] Searched previous issues 
-  - [ ] This is in _this_ firmware, not vendor "offical" firmware
-  - [ ] This is not a bug in the vendor bootloader (aka DFU)
-  - [ ] I have checked this is not already covered in the docs in `/Documentation`
-
-* **What is the current behavior?**
-
-* **What is the expected behavior?**
-
-***Steps to reproduce the bug:***
-
-- Turn on...
-- Hold....
-
-* **What is the motivation / use case for changing the behavior?**
-
-
-
-* **What are you running:**
-
-On the idle screen, you can hold the settings button and it will show you the firmware & PCB version.
-If using a USB-C supply please note model number
-
-  - Firmware Version: 2.x?
-  - PCB Version: (1/2)
-  - Power Supply (Voltage and Current Rating) :

Makefile

@@ -0,0 +1,245 @@
+#!/usr/bin/env make
+INFO:=top-level Makefile for IronOS - Soldering Iron Open Source Firmware Project.
+
+
+### global adjustable variables
+
+# command for "docker compose" from DOCKER env. var.
+ifdef DOCKER
+DOCKER_BIN:=$(DOCKER)
+else
+DOCKER_BIN:=
+endif
+
+# detect availability of docker
+ifndef DOCKER_BIN
+DOCKER_COMPOSE:=$(shell command -v docker-compose 2>/dev/null)
+DOCKER_TOOL:=$(shell command -v docker 2>/dev/null)
+ifdef DOCKER_COMPOSE
+DOCKER_BIN:=$(DOCKER_COMPOSE)
+else ifdef DOCKER_TOOL
+DOCKER_BIN:=$(DOCKER_TOOL) compose
+endif # DOCKER_* checks
+endif # DOCKER_BIN
+
+# command for python-based mkdocs tool
+ifndef MKDOCS
+MKDOCS:=mkdocs
+endif
+
+# build output related directories
+ifdef OUT
+OUT_DIR=$(OUT)
+else
+OUT_DIR=$(CURDIR)/BUILDS
+endif
+OUT_HEX=$(CURDIR)/source/Hexfile
+
+
+### global static variables
+
+# docker-related files
+DOCKER_YML=$(CURDIR)/Env.yml
+DOCKER_FILE=$(CURDIR)/scripts/IronOS.Dockerfile
+
+# docker dependencies
+DOCKER_DEPS=$(DOCKER_YML) $(DOCKER_FILE)
+
+# compose docker-compose command
+DOCKER_CMD=$(DOCKER_BIN)  -f $(DOCKER_YML)  run  --rm  builder
+
+# MkDocs config
+MKDOCS_YML=$(CURDIR)/scripts/IronOS-mkdocs.yml
+
+# supported models
+MODELS=TS100 TS80 TS80P Pinecil MHP30 Pinecilv2 S60 TS101 # target names & dir names
+MODELS_ML=Pinecil  Pinecilv2 # target names
+MODELS_MULTILANG=Pinecil_multi-lang  Pinecilv2_multi-lang # dir names
+
+# zip command (to pack artifacts)
+ZIP=zip -q -j -r
+
+
+### targets
+
+# default target to show help
+help:
+	@echo
+	@echo "Welcome!"
+	@echo "This is $(INFO)"
+	@echo "To read more about supported commands (aka \"targets\"), type \"make list\"."
+	@echo "But if you're impatient then just type \"make docker-build\" - it will:"
+	@echo "  * download, configure & start docker container"
+	@echo "  * compile builds of IronOS firmware for all supported models inside that container"
+	@echo "  * export generated binaries to \"scripts/ci/artefacts/\" local directory"
+	@echo "Patches are welcome. Happy Hacking!"
+	@echo
+
+# target to list supported targets with additional info
+list:
+	@echo
+	@echo "Supported top-level targets:"
+	@echo "  * help               - shows short basic help"
+	@echo "  * list               - this output"
+	@echo "  * docker-shell       - start docker container with shell inside to work on IronOS with all tools needed"
+	@echo "  * docker-build       - compile builds of IronOS for supported models inside docker container and place them to $(OUT_DIR) (set OUT env var to override: OUT=/path/to/dir make ...)"
+	@echo "  * docker-clean       - delete created docker image for IronOS & its build cache objects (to free a lot of space)"
+	@echo "  * docker-clean-cache - delete build cache objects of IronOS docker image EXCEPT the image itself"
+	@echo "  * docker-clean-image - delete docker image for IronOS EXCEPT its build cache objects"
+	@echo "  * docs               - generate \"site\"/ directory with documentation in a form of static html files using ReadTheDocs framework and $(MKDOCS_YML) local config file"
+	@echo "  * docs-deploy        - generate & deploy docs online to gh-pages branch of current github repo"
+	@echo "  * tests              - run set of checks, linters & tests (equivalent of github CI IronOS project settings for push trigger)"
+	@echo "  * clean-build        - delete generated files & dirs produced during builds EXCEPT docker image & its build cache"
+	@echo "  * clean-full         - delete generated files & dirs produced during builds INCLUDING docker image & its build cache"
+	@echo ""
+	@echo "NOTES on supported pass-trough targets:"
+	@echo "  * main Makefile is located in source/ directory and used to build the firmware itself;"
+	@echo "  * this top-level Makefile supports to call targets from source/Makefile;"
+	@echo "  * if you set up development environment right on your host, then to build firmware locally, you can just type right from here:"
+	@echo
+	@echo " $$ make firmware-LANG_ID model=MODEL_ID"
+	@echo
+	@echo "Full list of current supported IDs:"
+	@echo "  * LANG_ID: $(shell echo "`ls Translations/ | grep -e "^translation_.*.json$$" | sed -e 's,^translation_,,g; s,\.json$$,,g; ' | tr '\n' ' '`")"
+	@echo "  * MODEL_ID: $(MODELS)"
+	@echo
+	@echo "For example, to make a local build of IronOS firmware for TS100 with English language, just type:"
+	@echo
+	@echo " $$ make firmware-EN model=TS100"
+	@echo
+
+# detect availability of docker
+docker-check:
+ifeq ($(DOCKER_BIN),)
+	@echo "ERROR: Can't find docker-compose nor docker tool. Please, install docker and try again"
+	@exit 1
+else
+	@true
+endif
+
+# former start_dev.sh
+docker-shell: docker-check  $(DOCKER_DEPS)
+	$(DOCKER_CMD)
+
+# former build.sh
+docker-build: docker-check  $(DOCKER_DEPS)
+	$(DOCKER_CMD)  make  build-all
+
+# delete docker image
+docker-clean-image:
+	-docker  rmi  ironos-builder:latest
+
+# delete docker build cache objects
+docker-clean-cache:
+	-docker  system  prune  --filter label=ironos-builder:latest  --force
+
+# delete docker image & cache related to IronOS container
+docker-clean: docker-clean-image  docker-clean-cache
+
+# generate docs in site/ directory (DIR for -d is relative to mkdocs.yml file location, hence use default name/location site by setting up ../site)
+docs: $(MKDOCS_YML)  Documentation/*  Documentation/Flashing/*  Documentation/images/*
+	$(MKDOCS)  build  -f $(MKDOCS_YML)  -d ../site
+
+# deploy docs to gh-pages branch of current repo automagically using ReadTheDocs framework
+docs-deploy: $(MKDOCS_YML)  Documentation/*  Documentation/Flashing/*  Documentation/images/*
+	$(MKDOCS)  gh-deploy  -f $(MKDOCS_YML)  -d ../site
+
+# routine check for autogenerated Documentation/README.md
+test-md:
+	@echo ""
+	@echo "---- Checking REAMDE.md... ----"
+	@echo ""
+	@/bin/sh  ./scripts/deploy.sh  docs_readme
+
+# shell style & linter check (github CI version of shellcheck is more recent than alpine one so the latter may not catch some policies)
+test-sh:
+	@echo ""
+	@echo "---- Checking shell scripts... ----"
+	@echo ""
+	@for f in `find  ./scripts  -type f  -iname "*.sh"  ! -name "flash_ts100_linux.sh"` ; do shellcheck "$${f}"; done;
+
+# python-related tests & checks
+test-py:
+	@echo ""
+	@echo "---- Checking python code... ----"
+	@echo ""
+	flake8  Translations
+	black  --check  Translations
+	@$(MAKE)  -C source/  Objects/host/brieflz/libbrieflz.so
+	./Translations/brieflz_test.py
+	./Translations/make_translation_test.py
+
+# clang-format check for C/C++ code style
+test-ccpp:
+	@echo ""
+	@echo "---- Checking C/C++ code... ----"
+	@echo ""
+	$(MAKE)  -C source/  clean  check-style
+
+# meta target for tests & checks based on .github/workflows/push
+tests: test-md  test-sh  test-py  test-ccpp
+	@echo ""
+	@echo "All tests & checks have been completed successfully."
+	@echo ""
+
+# former scripts/ci/buildAll.sh - all in one to build all firmware & place the produced binaries into one output directory
+build-all:
+	@mkdir  -p  $(OUT_DIR)
+	@chmod  0777  $(OUT_DIR)
+	cd  source  &&  bash  ./build.sh
+	@echo "All Firmware built"
+	@for model in $(MODELS); do \
+		mkdir  -p  $(OUT_DIR)/$${model} ; \
+		cp  -r  $(OUT_HEX)/$${model}_*.bin  $(OUT_DIR)/$${model}/ ; \
+		cp  -r  $(OUT_HEX)/$${model}_*.hex  $(OUT_DIR)/$${model}/ ; \
+		cp  -r  $(OUT_HEX)/$${model}_*.dfu  $(OUT_DIR)/$${model}/ ; \
+	done;
+	@echo "Resulting output directory: $(OUT_DIR)"
+
+# target to build multilang supported builds for Pinecil & PinecilV2
+build-multilang:
+	@for modelml in $(MODELS_ML); do \
+		$(MAKE)  -C source/  -j2  model=$${modelml}  firmware-multi_compressed_European  firmware-multi_compressed_Bulgarian+Russian+Serbian+Ukrainian  firmware-multi_Chinese+Japanese ; \
+		mkdir  -p  $(OUT_DIR)/$${modelml}_multi-lang ; \
+		cp  $(OUT_HEX)/$${modelml}_multi_*.bin   $(OUT_DIR)/$${modelml}_multi-lang ; \
+		cp  $(OUT_HEX)/$${modelml}_multi_*.hex   $(OUT_DIR)/$${modelml}_multi-lang ; \
+		cp  $(OUT_HEX)/$${modelml}_multi_*.dfu   $(OUT_DIR)/$${modelml}_multi-lang ; \
+	done;
+	@echo "Resulting output directory: $(OUT_DIR)"
+
+# target to reproduce zips according to github CI settings; artifacts will be in $(OUT_DIR)/CI/*.zip
+ci: tests  build-all  build-multilang
+	@mkdir  -p  $(OUT_DIR)/metadata;
+	@for m in $(MODELS) $(MODELS_MULTILANG); do \
+		cp LICENSE scripts/LICENSE_RELEASE.md  $(OUT_DIR)/$${m}/ ; \
+		$(ZIP)  $(OUT_DIR)/$${m}.zip  $(OUT_DIR)/$${m} ;           \
+		./source/metadata.py  $${m}.json  $${m};                   \
+		cp  $(OUT_HEX)/$${m}.json  $(OUT_DIR)/metadata;            \
+	done;
+	@$(ZIP)  $(OUT_DIR)/metadata.zip  $(OUT_DIR)/metadata
+	@mkdir -p  $(OUT_DIR)/CI
+	@mv        $(OUT_DIR)/*.zip       $(OUT_DIR)/CI
+	@chmod  0777  $(OUT_DIR)/CI
+	@chmod  0666  $(OUT_DIR)/CI/*.zip
+	@echo "Resulting artifacts directory: $(OUT_DIR)/CI"
+
+# pass-through target for Makefile inside source/ dir
+%:
+	$(MAKE)  -C source/  $@
+
+# global clean-up target for produced/generated files inside tree
+clean-build:
+	$(MAKE)  -C source/  clean-all
+	rm  -Rf  site
+	rm  -Rf  $(OUT_DIR)
+
+# global clean-up target
+clean-full: clean-build  docker-clean
+
+# phony targets
+.PHONY:  help  list
+.PHONY:  docker-check  docker-shell  docker-build  docker-clean-image  docker-clean-cache  docker-clean
+.PHONY:  docs  docs-deploy
+.PHONY:  test-md  test-sh  test-py  test-ccpp  tests
+.PHONY:  build-all  build-multilang  ci
+.PHONY:  clean-build  clean-full

README.md

@@ -1,79 +1,139 @@
-![C/C++ CI](https://github.com/Ralim/ts100/workflows/C/C++%20CI/badge.svg)
+[![CI Build](https://github.com/Ralim/IronOS/actions/workflows/push.yml/badge.svg)](https://github.com/Ralim/IronOS/actions/workflows/push.yml)
+[![Total Downloads](https://img.shields.io/github/downloads/ralim/IronOS/total)](https://github.com/Ralim/IronOS)
+[![Contributors](https://img.shields.io/github/contributors-anon/ralim/ironos?color=blue&style=flat)](https://github.com/Ralim/IronOS/graphs/contributors)
+[![Latest Release](https://img.shields.io/github/v/release/ralim/IronOS)](https://github.com/Ralim/IronOS/releases/latest)
 
-# Flexible Soldering iron control Firmware
+# IronOS - Flexible Soldering iron control Firmware
 
-*Please Note, this repo will likely be renaming soon to unire - See issue #639. Old links willcontinue to work, and should redirect. So dont panic :) This is just to better account for the newer soldeing irons being added.*
+_This repository was formerly known as TS100, it's the same great code. Just with more supported devices._
 
-Originally concieved as an alternative firmware for the TS100, this firmware has evolved into a complex soldering iron control firmware.
+Originally conceived as an alternative firmware for the TS100, this firmware has evolved into a complex soldering iron control firmware.
 
-The firmware implements all of the standard features of a "smart" soldering iron, with lots of little extras and tweaks.
-I highly reccomend reading the installation guide fully when installing on your iron.
+The firmware implements all of the standard features of a 'smart' soldering iron, with lots of little extras and tweaks.
+I highly recommend reading the installation guide fully when installing on your iron. And after install just explore the settings menu.
 
-For soldering irons that are designed to be powered by "smart" power sources (QC and PD), the firmware supports settings around the negotiated power and voltage.
-For soldering irons that are designed to be powered by batteries (TS100), settings for a cutoff voltage for battery protection are supported.
+For soldering irons that are designed to be powered by 'smart' power sources (PD and QC), the firmware supports settings around the negotiated power and voltage.
+For soldering irons that are designed to be powered by batteries (TS100 & Pinecil), settings for a cutoff voltage for battery protection are supported.
 
-There are 25 languages currently supported as of present. When downloading the firmware for your soldering iron take node of the language code in the file name.
+Currently **31** languages are supported. When downloading the firmware for your soldering iron, take note of the language code in the file name.
 
-This project is considered feature complete for use as a soldering iron, *so please suggest any feature improvements you would like!*
+This project is considered feature complete for use as a soldering iron, _so please suggest any feature improvements you would like!_
 
-*This firmware does **NOT** support the USB port while running for changing settings. This is done through the onscreen menu only. Logos are edited using the tool or python script and uploaded in DFU mode.*
+_This firmware does **NOT** support the USB port while running for changing settings. This is done through the onscreen menu only. Logos are edited on a computer and flashed like firmware._
+
+|   Device       | DC  | QC  | PD  | EPR | BLE | Tip Sense | Recommended Purchase | Notes                                         |
+| :------------: | :-: | :-: | :-: | :-: | :-: | :-----:   | :------------------: | :-------------------------------------------:|
+| Miniware MHP30 | ❌  | ❌  | ✔️  | ❌  | ❌  |   ✔️      |      ✔️              |                                              |
+| Pinecil V1     | ✔️  | ✔️  | ✔️  | ❌  | ❌  |   ❌      |      ❌ *            |                                              |
+| Pinecil V2     | ✔️  | ✔️  | ✔️  | ✔️  | ✔️  |   ✔️      |      ✔️              |                                              |
+| Miniware TS101 | ✔️  | ❌  | ✔️  | ✔️  | ❌  |   ✔️      |      ✔️              |  Full OLED resolution not yet supported.     |
+| Sequre  S60    | ❌  | ❌  | ✔️  | ❌  | ❌  |   ❌      |      ✔️              |  Full OLED resolution not yet supported.     |
+| Miniware TS80P | ❌  | ✔️  | ✔️  | ❌  | ❌  |   N/A     |      ✔️              |                                              |
+| Miniware TS100 | ✔️  | ❌  | ❌  | ❌  | ❌  |   ❌      |      ❌**            |                                              |
+| Miniware TS80  | ❌  | ✔️  | ❌  | ❌  | ❌  |   N/A     |     ❌***            |                                              |
+
+_Tip Sense_ refers to the device being able to choose between the 'usual' TS100 or Hakko T12 style tips and Pine64's custom shorter tips which have lower resistance and allow for more power. This is N/A for TS80/TS80P as there is only one model of tip for them.
+
+_Recommended Purchase_ is only referring to if you are buying a **new** device. Of course all the devices listed are supported and will work excellently for years to come.
+
+The TS101 and S60 feature a higher resolution OLED than other devices. Work is ongoing to support this fully, for now a cropped view is usable.
+
+\*PinecilV1 stopped being manufactured a long time ago now, all models for sale online are generally clones (or old stock). Vendors are trying to sell these for more than Pine64 sells the V2 for now. Thus the V1 is **_no longer recommended_**.
+
+\**Please note that Miniware started shipping TS100's using cloned STM32 Chips. While these do work with IronOS, their DFU bootloader works terribly, and it is hard to get it to successfully flash larger firmware images like IronOS without timing out. This is the main reason why the TS100 is **_no longer recommended_**.
+
+\**\*TS80 is replaced by TS80P. Production ramped down a long time ago and it's just existing stock clearing the system. It's marked not recommended being optimistic that people might pause and buy the far superior TS80P instead. This is the main reason why the TS80 is **_no longer recommended_**.
+
+## Getting Started
+
+To get started with IronOS firmware, please jump to [Getting Started Guide](https://ralim.github.io/IronOS/GettingStarted/).
+But the [TL;DR](https://www.merriam-webster.com/dictionary/TL%3BDR) is to press the button near the front of the iron to heat up. Use the button near the back of the iron to enter the settings menu.
+Long hold the rear button in soldering mode to exit back to the start screen.
+
+## Installation
+
+For notes on installation for your device, please refer to the flashing guide for your device:
+
+- [MHP30](https://ralim.github.io/IronOS/Flashing/MHP30)
+- [Pinecil V1](https://ralim.github.io/IronOS/Flashing/Pinecil%20V1/)
+- [Pinecil V2](https://ralim.github.io/IronOS/Flashing/Pinecil%20V2/)
+- [TS80 / TS80P](https://ralim.github.io/IronOS/Flashing/TS80%28P%29/)
+- [TS100](https://ralim.github.io/IronOS/Flashing/TS100)
 
 ## Key Features
 
-* PID style iron temperature control
-* Automatic sleep with selectable sensitivity
-* Motion wake support
-* All settings exposed in intuitive menu
-* (TS100) Set a voltage lower limit for Lithium batteries so you don't kill your battery pack
-* (TS80) Set 18W or 24W settings for your power bank
-* Improved readability Fonts
-* Use hardware features to improve reliability
-* Can disable movement detection if desired
-* Boost mode lets you temporarily change the temperature when soldering (i.e. raise the temperature for short periods of time)
-* (TS100) Battery charge level indicator if power source set to a lipo cell count
-* (TS80) Power bank operating voltage is displayed
-* [Custom boot up logo support](Documentation/upgrading.md)
-* Automatic LCD rotation based on the orientation
-* Supports both the version 1 and version 2 hardware (different accelerometers)
+- PID style iron temperature control
+- Automatic sleep with selectable sensitivity
+- Motion wake support
+- All settings exposed in the intuitive menu
+- (TS100) Set a voltage lower limit for Lithium batteries so you don't kill your battery pack
+- (TS80) Set 18 W or 24 W settings for your power bank
+- (TS80P) Automatically negotiates appropriate PD and falls back to QC mode like TS80
+- (Pinecil) Supports all 3 power modes (PD, QC, DC In).
+- (Pinecilv2) Supports USB-PD EPR for 28V operation.
+- Improved readability Fonts, supporting multiple languages
+- Use hardware features to improve reliability
+- Can disable movement detection if desired
+- Boost mode lets you temporarily change the temperature when soldering (i.e. raise the temperature for short periods)
+- (TS100/Pinecil) Battery charge level indicator if power source set to a lipo cell count
+- (TS80/TS80P/Pinecil) Power bank operating voltage is displayed
+- [Custom boot up logo support](https://ralim.github.io/IronOS/Logo/)[^bootlogo]
+- Automatic LCD rotation based on the orientation
 
-# Menu System
+
+[^bootlogo]: **BOOTUP LOGO NOTICE**:
+  IronOS supports both a bootup logo _AND_ bootup animations.
+  However, _**they are no longer included in this repo**_.
+  **Please, [read the docs](https://ralim.github.io/IronOS/Logo/) for more information**.
+
+## Menu System
 
 This new firmware uses a new menu system to allow access to the settings on the device.
-When on the main screen, the unit shows prompts for the two most common operations.
+When on the main screen and having the tip plugged in, the unit shows a pair of prompts for the two most common operations.
 
-* Pressing the button near the tip enters soldering mode
-* Pressing the button near the USB enters the settings menu
-* Holding the button near the tip will enter soldering temperature adjust mode (This is the same as the one in the soldering menu, just to let you edit before heating up)
-* Holding the button near the USB end will show the firmware version details
+- Pressing the button near the tip enters the _soldering mode_
+- Pressing the button near the USB end enters the _settings menu_
+- When not in _soldering mode_, holding down the button near the tip will enter _soldering temperature adjust mode_ (This is the same as the one in the _soldering mode_, but allows to adjust the temperature before heating up), in _soldering mode_ however this will activate _boost mode_ as long as you hold down the button.
+- Holding down the button near the USB end will show the _[debug menu](https://ralim.github.io/IronOS/DebugMenu/)._ In _soldering mode_ this ends the heating.
 
-Detailed operation details are over in the [Menu information.](Documentation/menu.md)
+Operation details are over in the [Menu information.](https://ralim.github.io/IronOS/Menu/)
+
+## Translations
+
+Is your preferred language missing localisation of some of the text?
+Translations are stored as `json` files in the Translations folder.
+PR's are loved and accepted to enhance the firmware.
 
 ## Thanks
 
 If you love this firmware and want to continue my caffeine addiction, you can do so [here](https://paypal.me/RalimTek) (or email me for other options).
-I also want to give a shout out to all of the [Fantastic Contributors](https://github.com/Ralim/ts100/graphs/contributors).
+I also want to give a shout out to all of the [Fantastic Contributors](https://github.com/Ralim/IronOS/graphs/contributors).
 
 Especially to the following users, who have helped in various ways that are massively appreciated:
 
-* [Dhiltonp](https://github.com/dhiltonp)
-* [Mrkvozrout](https://github.com/Mrkvozrout)
-* [JonnieZG](https://github.com/jonnieZG)
-* [Federck](https://github.com/federck)
-* [Jvitkauskas](https://github.com/jvitkauskas)
-* [Doegox](https://github.com/doegox)
-* [Perillamint](https://github.com/perillamint)
-* [GeminiServer](https://github.com/GeminiServer)
-* [Patrick Horlebein](https://github.com/PixelPirate)
-* [Firebie](https://github.com/Firebie)
-* [Agatti](https://github.com/agatti)
-* [Discip](https://github.com/discip)
-* [Paul Fertser](https://github.com/paulfertser)
+- [Dhiltonp](https://github.com/dhiltonp)
+- [Mrkvozrout](https://github.com/Mrkvozrout)
+- [JonnieZG](https://github.com/jonnieZG)
+- [Federck](https://github.com/federck)
+- [Jvitkauskas](https://github.com/jvitkauskas)
+- [Doegox](https://github.com/doegox)
+- [Perillamint](https://github.com/perillamint)
+- [GeminiServer](https://github.com/GeminiServer)
+- [Patrick Horlebein](https://github.com/PixelPirate)
+- [Firebie](https://github.com/Firebie)
+- [Agatti](https://github.com/agatti)
+- [Discip](https://github.com/discip)
+- [Paul Fertser](https://github.com/paulfertser)
+
+Plus the huge number of people who have contributed translations, your effort is massively appreciated.
+
 ## Licence
 
 The code created by the community is GNU GPLv3. Unless noted elsewhere.
-Other components such as FreeRTOS have their own licence.
+Other components such as FreeRTOS/USB-PD have their own licence.
 
 ## Commercial Use
 
-This software is provided as-is, so I cannot provide any commercial support for the firmware. However, you are more than welcome to distribute links to the firmware, or provide irons with this software on them.
+This software is provided as-is, so I cannot provide any commercial support for the firmware.
+However, you are more than welcome to distribute links to the firmware or provide irons with this software on them.
 Please do not re-host the files, but rather link to this page, so that there are no old versions of the firmware scattered around.

Translation Editor/BitmapEditor.html

@@ -1,245 +0,0 @@
-<!doctype html>
-<html>
-<head>
-	<script src="https://cdn.jsdelivr.net/npm/vue/dist/vue.js"></script>
-	<script src="translations_commons.js"></script>
-	<title>TS100 Bitmap Editor</title>
-	<style>
-		.matrix {
-			display: inline-block;
-			padding: 0px 0px 1px 1px ;
-			background-color: #666;
-			margin-top: 1em;
-			margin-bottom: 1em;
-		}
-		
-		.matrix * {
-			font-size:0;
-		}
-		.c {
-			margin:1px 1px 0px 0px;
-			display: inline-block;
-			background-color: #fff;
-			height:10px;
-			width: 10px;
-		}
-		
-		.x {
-			background-color: #000;
-		}
-		
-		.header {
-		}
-		
-		.data input, .data textarea {
-			margin-top: 1em;
-			width: 100%;
-		}
-		
-		.actions {
-		}
-	</style>
-	<script>
-	
-	var ink, pressed, ev;
-	function mousedown(e) {
-		c = window.event.target;
-		classes = c.className.split(" ");
-		if (classes.indexOf("c")<0) {
-			return;
-		}
-		ink = classes.indexOf("x")<0;
-		pressed = true;
-		ev = e;
-		enter(e);
-	}
-	
-	function mouseup(e) {
-		ev = e;
-		pressed = false;
-	}
-	
-	function enter(e) {
-		if (!pressed) {
-			return;
-		}
-		ev = e;
-		c = window.event.target;
-		paint(c, ink);
-		stringFromMatrix();
-	}
-
-	function paint(c, ink) {
-		var cellInk = isInk(c);
-		if (ink) {
-			if (!cellInk) {
-				c.className += " x";
-			}
-		} else {
-			if (cellInk) {
-				c.className = "c";
-			}
-		}
-	}
-
-	function isInk(c) {
-		try {
-			var classes = c.className.split(" ");
-			return classes.indexOf("x") >= 0;
-		} catch(e) {
-			return false;
-		}
-	}
-	
-	function getMatrix() {
-		return document.getElementById("matrix");
-	}
-	
-	function getCoordinatesFromId(str) {
-		i = str.indexOf('_');
-		return {
-			row: parseInt(str.substring(1, i)),
- 			col: parseInt(str.substring(i+1))
-		}
-	}
-
-	function clearMatrix() {
-		for (var r = 0; r < app.matrix.rows; r++) {
-			for (var c = 0; c < app.matrix.cols; c++) {
-				paint(getCell(r, c), false);
-			}
-		}
-	}
-	
-	function getCell(row, col) {
-		return document.getElementById("C"+row+"_"+col);
-	}
-	
-	function toMatrix(str) {
-		app.encodedData = str;
-		clearMatrix();
-		var strs = str.split(/[ ,]/);
-		var pair = false;
-		var c = 0;
-		var rs = 7;
-		for (var i = 0; i<strs.length; i++) {
-			var d = strs[i];
-			if (d.length > 0) {
-				if (startsWith(d, "0x")) {
-					v = parseInt(d.substring(2), 16);
-				} else {
-					v = parseInt(d);
-				}
-				sv = padLeft(v.toString(2), "0", 8);
-				for (r = 0; r < 8; r++) {
-					paint(getCell(rs - r, c), sv.charAt(r) == '1');
-				}
-				c++;
-				if (c >= app.matrix.cols) {
-					c = 0;
-					rs += 8;
-				}
-			}
-		}
-	}
-
-	function stringFromMatrix() {
-		var str = "";
-		var delim = "";
-		var blocks = app.matrix.rows / 8;
-		var rs = 7;
-		for (var block = 0; block < blocks; block++) {
-			for (var c = 0; c < app.matrix.cols; c++) {
-				var b = 0;
-				for (var r = 0; r < 8; r++) {
-					var cell = document.getElementById("C"+(rs-r)+"_"+c);
-					if (isInk(cell)) {
-						b |= (1 << (7-r));
-					}
-				}
-				str += delim + "0x" + padLeft(b.toString(16).toUpperCase(), "0", 2);
-				delim = ",";
-			}
-			rs += 8;
-		}
-		app.encodedData = str;
-		return str;
-	}
-	
-	function start() {
-		app = new Vue({
-			el : '#app',
-			data : {
-				matrix: {
-					cols: 12,
-					rows: 16
-				},
-				type: "big",
-				encodedData: ""
-			},
-			methods : {
-				VtoMatrix : function(val) {
-					toMatrix(val);
-				},
-				
-				VchangeSize : function() {
-					if (app.type == "big") {
-						app.matrix.cols = 12;
-						app.matrix.rows = 16;
-					} else if (app.type == "small") {
-						app.matrix.cols = 6;
-						app.matrix.rows = 8;
-					} else if (app.type == "icon") {
-						app.matrix.cols = 16;
-						app.matrix.rows = 16;
-					} else if (app.type == "icon24") {
-						app.matrix.cols = 24;
-						app.matrix.rows = 16;
-					} else if (app.type == "screen") {
-						app.matrix.cols = 84;
-						app.matrix.rows = 16;
-					} else if (app.type == "fullscreen") {
-						app.matrix.cols = 96;
-						app.matrix.rows = 16;
-					}
-					stringFromMatrix();
-				}
-				
-			}
-		});
-		toMatrix("0x00,0xF0,0x08,0x0E,0x02,0x02,0x02,0x02,0x0E,0x08,0xF0,0x00,0x00,0x3F,0x40,0x5C,0x5C,0x5C,0x5C,0x5C,0x5C,0x40,0x3F,0x00");
-	}
-
-	window.onload=start; 
-	</script>
-
-	
-</head>
-<body>
-	<div id="app">
-		<div class="header">
-			<select v-model="type" v-on:change="VchangeSize()">
-				<option value="small">Small Font (6x8)</option>
-				<option value="big">Big Font (12x16)</option>
-				<option value="icon">Icon (16x16)</option>
-				<option value="icon24">Icon (24x16)</option>
-				<option value="screen">Screen (84x16)</option>
-				<option value="fullscreen">Full Screen (96x16)</option>
-			</select>
-		</div>
-		<div id="matrix" class="matrix" onmousedown="mousedown(this)" onmouseup="mouseup(this)" ondragstart="return false">
-			<div :id="'R'+(r-1)" class="r" v-for="r in matrix.rows">
-				<div :id="'C'+(r-1)+'_'+(c-1)" class="c" onmouseenter="enter(this)" v-for="c in matrix.cols"></div>
-			</div>
-		</div>
-		<div class="actions">
-			<input type="button" value="Clear" onclick="clearMatrix();stringFromMatrix()">
-		</div>
-		<div class="data">
-			<textarea v-model="encodedData" style="width:100%" v-on:change="VtoMatrix(encodedData)" rows=5>
-		</div>
-	</div>
-		
-	
-</body>
-</html>

Translation Editor/TranslationEditor.html

@@ -1,329 +0,0 @@
-<!DOCTYPE html>
-<html>
-
-	<head>
-		<meta charset="UTF-8">
-		<title>TS100 Translation Editor</title>
-
-		<script src="https://cdn.jsdelivr.net/npm/vue/dist/vue.js"></script>
-		<script src="translations_commons.js"></script>
-		<script src="translations_def.js"></script>
-		<script>
-
-	var app;
-	var defMap = {};
-	
-	function save(){
-		saveJSON(app.current, "translation_"+app.current.languageCode.toLowerCase()+".json");
-	}
-
-	function view(){
-		showJSON(app.current, "translation_"+app.current.languageCode.toLowerCase()+".json");
-	}
-
-	function fileChanged(e) {
-		var target = e;
-		var id = target.id;
-		
-		var file = target.files[0];
-		if (!file) {
-			return;
-		}
-		var fr = new FileReader();
-		fr.onload = function(e) {
-			try {
-				var json = JSON.parse(e.target.result);
-			} catch (ex) {
-				console.log(ex);
-				alert("Invalid JSON file: " + file.name);
-				return;
-			}
-				
-
-			if (id == "referent-lang-file") {
-				if (checkTranslationFile(file.name)) {
-					app.referent = json;
-					app.meta.referentLoaded = true;
-				}
-			} else if (id == "current-lang-file") {
-				if (checkTranslationFile(file.name)) {
-					app.current = json;
-					if (!app.current.cyrillicGlyphs){
-						app.current.cyrillicGlyphs = false;
-					}
-					app.meta.currentLoaded = true;
-				}
-			} 		
-			synchronizeData();
-		}
-		fr.readAsText(file);
-		
-	}
-	
-	function synchronizeData() {
-		app.obsolete = {};
-		copyMissing(app.def.messages, app.referent.messages, app.current.messages);
-		copyMissing(app.def.characters, app.referent.characters, app.current.characters);
-		copyMissing(app.def.menuGroups, app.referent.menuGroups, app.current.menuGroups);
-		copyMissing(app.def.menuOptions, app.referent.menuOptions, app.current.menuOptions);
-	}
-	
-	/**
-	 * Copy all missing properties from referent to current
-	 * for each entry in definition
-	 */
-	function copyMissing(defList, referentMap, currentMap) {
-		if (!isDefined(defList) || !isDefined(referentMap) || !isDefined(currentMap)) {
-			return;
-		}
-		var len = defList.length;
-		for (var i = 0; i < len; i++) {
-			var id = defList[i].id;
-			if (!isDefined(referentMap[id])) {
-				referentMap[id] = '';
-			}
-			if (!isDefined(currentMap[id])) {
-				currentMap[id] = referentMap[id];
-			}
-		}
-		processObsolete(defList, currentMap);
-	}
-
-	// Passes through all entries from the given map.
-	// If a corresponding entry is not found in the defList, it is removed from the map, and added into the obsolete map.
-	function processObsolete(defList, map) {
-		// Index list to map for faster search
-		var defMap = copyArrayToMap(defList);
-		Object.keys(map).forEach(function(key) {
-			if (!isDefined(defMap[key])) {
-				app.obsolete[key] = { id : key, value : map[key]};
-				delete map[key];
-			}
-		});
-	}
-
-	function length(obj, mode) {
-		if (!isDefined(mode) || mode == 0) {
-			// return direct length
-			return obj.length;
-		} 
-		// return the longest length in text2 array
-		return Math.max(isDefinedNN(obj.text2[0]) ? obj.text2[0].length : 0, isDefinedNN(obj.text2[1]) ? obj.text2[1].length : 0);
-	
-	}
-	
-	function getAttribute(obj, attribute) {
-		var d =  "2";
-		var v = obj[attribute+d];
-		if (isDefined(v))
-			return v;
-		return obj[attribute];
-	}
-	
-	function loaded() {
-		app = new Vue({
-			el : '#app',
-			data : {
-				meta : {
-					referentLoaded : false,
-					currentLoaded : false,
-				},
-				def : {
-				},
-				referent : {
-					messages : {}
-				},
-				current : {
-					loaded: false,
-				},
-				obsolete : {},
-			},
-			methods : {
-				validateInput: function(valMap, id, mode) {
-					var d = defMap[id];
-					var vLen = 0;
-					if (!isDefined(mode))
-						mode = 0;
-						
-					try {
-						// Sum for complex length
-						for (var i = 0; i < d.lenSum.fields.length; i++) {
-							vLen += length(valMap[d.lenSum.fields[i]], mode);
-						}
-						d = d.lenSum;
-					} catch (e) {
-						// Single field length
-						vLen = length(valMap[id], mode);
-					}
-					var maxLen = getAttribute(d, 'maxLen', mode == 2);
-					var minLen = getAttribute(d, 'minLen', mode == 2);
-					var len = getAttribute(d, 'len', mode == 2);
-					if (isNumber(maxLen) && vLen > maxLen
-						|| isNumber(minLen) && vLen < minLen
-						|| isNumber(len) && vLen != len
-						) {
-						return "invalid";
-					}
-				},
-				
-				constraintString: function(e) {
-					var str = "";
-					var delim = "";
-					var v;
-					d = "2";
-					if (isDefinedNN(e.lenSum)) {
-						str = "len("+(e.lenSum.fields+"").replace(/,/g," + ")+") -> ";
-						e = e.lenSum;
-					}
-					v = getAttribute(e, 'len', d);
-					if (isNumber(v)) {
-						str += delim + "len=" + v;
-						delim = " and ";
-					}
-					v = getAttribute(e, 'minLen', d);
-					if (isNumber(v)) {
-						str += delim + "len>=" + v;
-						delim = " and ";
-					}
-					v = getAttribute(e, 'maxLen', d);
-					if (isNumber(v)) {
-						str += delim + "len<=" + v;
-						delim = " and ";
-					}
-					return str;
-				}
-			}
-		});
-		app.def = def;
-		copyArrayToMap(app.def.messages, defMap);
-		copyArrayToMap(app.def.characters, defMap);
-		copyArrayToMap(app.def.menuGroups, defMap);
-		copyArrayToMap(app.def.menuOptions, defMap);
-	}
-	
-	window.onload=loaded;
-</script>
-	<link href="translations.css" rel="stylesheet" type="text/css">
-	</head>
-	<body>
-
-		<div id="app">
-			<h1>TS100 Translation Editor<span v-if="meta.currentLoaded"> - {{ current.languageLocalName }} [{{current.languageCode}}]</span></h1>
-			<table class="header data">
-				<tr>
-					<td class="label">Referent Language</td>
-					<td class="value">
-						<input type="file" id="referent-lang-file" onchange="fileChanged(this)" accept=".json">
-						<span class="selected" v-if="meta.referentLoaded">{{ referent.languageLocalName }} [{{referent.languageCode}}]</span>
-					</td>
-				</tr>
-				<tr v-if="meta.referentLoaded">
-					<td class="label">Current Language</td>
-					<td class="value">
-						<input type="file" id="current-lang-file" onchange="fileChanged(this)" accept=".json">
-						<span class="selected" v-if="meta.currentLoaded">{{ current.languageLocalName }} [{{current.languageCode}}]</span>
-					</td>
-				</tr>
-				<tr v-if="meta.currentLoaded">
-					<td class="label">Local Language Code</td>
-					<td class="value"><input type="text" v-model="current.languageCode" maxlength="8" v-on:change="current.languageCode=current.languageCode.toUpperCase()" class="short"></td>
-				</tr>
-				<tr v-if="meta.currentLoaded">
-					<td class="label">Local Language Name</td>
-					<td class="value"><input type="text" v-model="current.languageLocalName" class="short"></td>
-				</tr>
-				<tr v-if="meta.currentLoaded">
-					<td class="label">Font table to use</td>
-					<td class="value">
-						<select v-model="current.cyrillicGlyphs" v-on:change="current.cyrillicGlyphs = current.cyrillicGlyphs=='true'">
-							<option value="false">Latin Extended</option>
-							<option value="true">Cyrillic Glyphs</option>
-						</select>
-					</td>
-				</tr>
-			</table>
-			
-			<div v-if="def.messages && referent.messages && current.messages">
-
-				<div class="footer">
-					<input type="button" value="Save" onclick="save()">
-					<input type="button" value="View" onclick="view()">
-				</div>
-				
-				<div v-if="Object.keys(obsolete).length > 0">
-					<h2>Obsolete</h2>
-					<table class="data">
-						<tr v-for="entry in obsolete">
-							<td class="label"><div class="stringId">{{entry.id}}</div></td>
-							<td class="value"><div class="ref">{{entry.value}}</div></td>
-						</tr>
-					</table>
-				</div>
-
-				<h2>Messages and Strings</h2>
-				<table class="data">
-					<tr v-for="message in def.messages" v-bind:class="validateInput(current.messages, message.id)">
-						<td class="label"><div class="stringId">{{message.id}}</div></td>
-						<td class="value">
-							<div class="constraint">{{constraintString(message)}}</div>
-							<div class="ref">{{referent.messages[message.id]}}</div>
-							<div class="note" v-if="message.note">{{message.note}}</div>
-							<div class="tran"><input :id="'in_'+message.id" type="text" v-model="current.messages[message.id]" v-bind:class="{unchanged : current.messages[message.id] == referent.messages[message.id], empty : current.messages[message.id]==''}"></div>
-						</td>
-					</tr>
-				</table>
-
-				<h2>Characters</h2>
-				<table class="data">
-					<tr v-for="char in def.characters" v-bind:class="validateInput(current.characters, char.id)">
-						<td class="label"><div class="stringId">{{char.id}}</div></td>
-						<td class="value">
-							<div class="constraint">{{constraintString(char)}}</div>
-							<div class="ref">{{referent.characters[char.id]}}</div>
-							<div class="tran"><input type="text" v-model="current.characters[char.id]" v-bind:class="{unchanged : current.characters[char.id] == referent.characters[char.id], empty : current.characters[char.id].length != 1}"></div>
-						</td>
-					</tr>
-				</table>
-
-				<h2>Menu Groups</h2>
-				<table class="data">
-					<tr v-for="menu in def.menuGroups" v-bind:class="validateInput(current.menuGroups, menu.id, 2)">
-						<td class="label"><div class="stringId">{{menu.id}}</div></td>
-						<td class="value">
-							<div class="label">Menu Name</div>
-							<div class="constraint">{{constraintString(menu)}}</div>
-							<div class="ref">{{referent.menuGroups[menu.id].text2}}</div>
-							<div class="tran" v-bind:class="{unchanged : current.menuGroups[menu.id].text2[0] == referent.menuGroups[menu.id].text2[0] && current.menuGroups[menu.id].text2[1] == referent.menuGroups[menu.id].text2[1], empty : current.menuGroups[menu.id].text2[0] == '' || current.menuGroups[menu.id].text2[1] == ''}"><input type="text" v-model="current.menuGroups[menu.id].text2[0]"><input type="text" v-model="current.menuGroups[menu.id].text2[1]"></div>
-							<div class="label">Description</div>
-							<div class="ref">{{referent.menuGroups[menu.id].desc}}</div>
-							<div class="tran"><input type="text" v-model="current.menuGroups[menu.id].desc" v-bind:class="{unchanged : current.menuGroups[menu.id].desc == referent.menuGroups[menu.id].desc, empty : current.menuGroups[menu.id].desc == ''}"></div>
-						</td>
-					</tr>
-				</table>
-
-				<h2>Menu Options</h2>
-				<table class="data">
-					<tr v-for="menu in def.menuOptions" v-bind:class="validateInput(current.menuOptions, menu.id, 2)">
-						<td class="label"><div class="stringId">{{menu.id}}</div></td>
-						<td class="value">
-							<div v-bind:class="{hidden : false}">
-								<div class="label">Menu Name (Double-Line)</div>
-								<div class="constraint">{{constraintString(menu)}}</div>
-								<div class="ref">{{referent.menuOptions[menu.id].text2}}</div>
-								<div class="tran" v-bind:class="{unchanged : current.menuOptions[menu.id].text2[0] == referent.menuOptions[menu.id].text2[0] && current.menuOptions[menu.id].text2[1] == referent.menuOptions[menu.id].text2[1], empty : current.menuOptions[menu.id].text2[0] == '' || current.menuOptions[menu.id].text2[1] == ''}"><input type="text" v-model="current.menuOptions[menu.id].text2[0]"><input type="text" v-model="current.menuOptions[menu.id].text2[1]"></div>
-							</div>
-							<div class="label">Description</div>
-							<div class="ref">{{referent.menuOptions[menu.id].desc}}</div>
-							<div class="tran"><input type="text" v-model="current.menuOptions[menu.id].desc" v-bind:class="{unchanged : current.menuOptions[menu.id].desc == referent.menuOptions[menu.id].desc, empty : current.menuOptions[menu.id].desc == ''}"></div>
-						</td>
-					</tr>
-				</table>
-
-				<div class="footer">
-					<input type="button" value="Save" onclick="save()">
-					<input type="button" value="View" onclick="view()">
-				</div>
-			</div>
-		</div>
-	</body>
-</html>

Translation Editor/TranslationsParser.html

@@ -1,322 +0,0 @@
-<!DOCTYPE html>
-<html>
-
-	<head>
-		<meta charset="UTF-8">
-		<title>TS100 Translation Parser</title>
-
-		<script src="https://cdn.jsdelivr.net/npm/vue/dist/vue.js"></script>
-		<script src="translations_commons.js"></script>
-		<script src="translations_def.js"></script>
-		<script>
-
-	var app;
-	var defMap = {};
-	var langMap = {};
-	var lang;
-
-	var defMsgMap;
-	var defCharMap; 	
-	var defGrpMap;	
-	var defOptMap;	
-	
-	function save(langCode){
-		saveJSON(langMap[langCode], "translation_"+langCode.toLowerCase()+".json");
-	}
-
-	function view(langCode){
-		showJSON(langMap[langCode], "translation_"+langCode.toLowerCase()+".json");
-	}
-
-	function translationFileSelected(e) {
-		var target = e;
-		var id = target.id;
-		
-		var file = target.files[0];
-		if (!file) {
-			return;
-		}
-		var fr = new FileReader();
-		fr.onload = function(e) {
-			parseTranslationFile(file.name, e.target.result);
-		}
-		fr.readAsText(file);
-		
-	}
-	
-	function parseTranslationFile(name, src) {
-		// remove multiline comments
-		src = src.replace(/\/\*[\s\S.]*?\*\//mg, "");
-		// remove single-line comments
-		src = src.replace(/\/\/.*/mg, "");
-		// remove empty lines
-		src = src.replace(/^\s*\n/gm, "");
-		
-		var langCode = "";
-		var srcLines = src.split("\n");
-
-		var reMessage = /const\s+char\s*\*\s+([\w\d]+)\s*=\s*"(.*)"/;
-		var reSettingsDescStart = /const\s+char\s*\*\s+SettingsDescriptions\[/;
-		var reSettingsNamesStart = /const\s+char\s*\*\s+SettingsShortNames\[/;
-		var reSettingsMenuDescStart = /const\s+char\s*\*\s+SettingsMenuEntriesDescriptions\[/;
-		var reChar = /const\s+char\s+([\w\d]+)\s*=\s*'(\w)'/;
-		var reMenuMode = /SettingsShortNameType\s*=\s*SHORT_NAME_(\w+)_LINE/;
-		
-		var reMenuStart = /\s*const\s+char\s*\*\s+SettingsMenuEntries\[/;
-
-//		var reString = /^\s*"(.*)"/;
-		var reString = /"(.*)"/;
-		var reSingleLine = /{\s*"(.*)"\s*}/;
-		var reDoubleLine = /{\s*"(.*)"\s*,\s*"(.*)"\s*}/;
-		
-		var mode = '';
-		var entryIndex = 0;
-		for (var li = 0; li < srcLines.length; li++) {
-			// trim lines
-			line = srcLines[li] = srcLines[li].trim();
-			
-			// if entering a new lang block
-			if (startsWith(line, "#ifdef LANG_")) {
-				mode = 'new-language';
-				langCode = line.substring(12);
-				lang = langMap[langCode];
-				// use existing or instantiate new
-				if (!isDefined(lang)) {
-					lang = {
-						languageCode: langCode,
-						cyrillicGlyphs: false,
-						messages: {},
-						characters: {},
-						menuGroups: {},
-						menuOptions: {}
-					};
-					langMap[langCode] = lang;
-					app.languages[app.languages.length] = langCode;
-				}
-				entryIndex = 0;
-				continue;
-			}
-
-			// Use Cyrillic glyphs
-			if (startsWith(line, "#define CYRILLIC_GLYPHS")) {
-				lang.cyrillicGlyphs = true;
-				entryIndex = 0;
-				continue;
-			}
-
-			// Menu type
-			reMenuMode.lastIndex = 0;
-			match = reMenuMode.exec(line);
-			if (match) {
-				entryIndex = 0;
-				continue;
-			}
-			
-			// Messages
-			reMessage.lastIndex = 0;
-			match = reMessage.exec(line);
-			if (match) {
-				lang.messages[match[1]] = xunescape(match[2]);
-				entryIndex = 0;
-				continue;
-			}
-			
-			// Chars descriptions
-			reChar.lastIndex = 0;
-			match = reChar.exec(line);
-			if (match) {
-				// found description block start
-				mode = 'char';
-				lang.characters[match[1]] = xunescape(match[2]);
-				entryIndex = 0;
-				continue;
-			}
-			// Settings descriptions
-			reSettingsDescStart.lastIndex = 0;
-			match = reSettingsDescStart.exec(line);
-			if (match) {
-				// found description block start
-				mode = 'settingsDesc';
-				entryIndex = 0;
-				continue;
-			}
-			reSettingsNamesStart.lastIndex = 0;
-			match = reSettingsNamesStart.exec(line);
-			if (match) {
-				// found description block start
-				mode = 'settingsNames';
-				entryIndex = 0;
-				continue;
-			}
-			reMenuStart.lastIndex = 0;
-			match = reMenuStart.exec(line);
-			if (match) {
-				// found description block start
-				mode = 'menu';
-				entryIndex = 0;
-				continue;
-			}
-			reSettingsMenuDescStart.lastIndex = 0;
-			match = reSettingsMenuDescStart.exec(line);
-			if (match) {
-				// found description block start
-				mode = 'menuDesc';
-				entryIndex = 0;
-				continue;
-			}
-			
-			if (mode == 'menu') {
-				// processing menu group names
-				reString.lastIndex = 0;
-				match = reString.exec(line);
-				if (match) {
-					// found description string
-					var entry = getMenuGroup(entryIndex);
-					var m = match[1].split("\\n");
-					entry.text2[0] = xunescape(m[0]);
-					entry.text2[1] = xunescape(m[1]);
-					entryIndex++;
-				}
-			} else if (mode == 'menuDesc') {
-				// processing menu group descriptions
-				reString.lastIndex = 0;
-				match = reString.exec(line);
-				if (match) {
-					// found description string
-					var entry = getMenuGroup(entryIndex);
-					entry.desc = xunescape(match[1]);
-					entryIndex++;
-				}
-			} else if (mode == 'settingsDesc') {
-				// processing option descriptions
-				reString.lastIndex = 0;
-				match = reString.exec(line);
-				if (match) {
-					// found description string
-					var entry = getMenuOption(entryIndex);
-					entry.desc = xunescape(match[1]);
-					entryIndex++;
-				}
-			} else if (mode == 'settingsNames') {
-				reDoubleLine.lastIndex = 0;
-				match = reDoubleLine.exec(line);
-				if (match) {
-					var entry = getMenuOption(entryIndex);
-					entry.text2[0] = xunescape(match[1]);
-					entry.text2[1] = xunescape(match[2]);
-					entryIndex++;
-				} else {
-					reSingleLine.lastIndex = 0;
-					match = reSingleLine.exec(line);
-					if (match) {
-						var entry = getMenuOption(entryIndex);
-						entry.text = xunescape(match[1]);
-						entryIndex++;
-					}
-
-				}
-			}
-		}
-		app.done = 1;
-	}
-
-	function getMenuOption(entryIndex) {
-		var optionDef = def.menuOptions[entryIndex];
-		if (!isDefined(optionDef)) {
-			var s = "Could not find menu option with index "+entryIndex;
-			alert(s);
-			throw s;
-		}
-		var id = optionDef.id;
-		var entry = lang.menuOptions[id];
-		if (!isDefined(entry)) {
-			entry =
-			{
-				"text2": ["", ""],
-				"desc": ""
-			}
-			lang.menuOptions[id] = entry;
-		}
-		return entry;
-	}
-	
-	function getMenuGroup(entryIndex) {
-		var optionDef = def.menuGroups[entryIndex];
-		if (!isDefined(optionDef)) {
-			var s = "Could not find menu group with index "+entryIndex;
-			alert(s);
-			throw s;
-		}
-		var id = optionDef.id;
-		var entry = lang.menuGroups[id];
-		if (!isDefined(entry)) {
-			entry =
-			{
-				"text2": ["", ""],
-				"desc": ""
-			}
-			lang.menuGroups[id] = entry;
-		}
-		return entry;
-	}
-	
-	function markSaved(lang) {
-		document.getElementById("row_"+lang).classList.add("saved");
-	}
-	
-	function loaded() {
-		app = new Vue({
-			el : '#app',
-			data : {
-				languages: [],
-				done : false,
-				def : {
-				}
-				
-			},
-			methods : {
-				vSave : function(lang) {
-					save(lang);
-					markSaved(lang);
-				},
-				vView : function(lang) {
-					view(lang);
-					markSaved(lang);
-				}
-			}
-		});
-		
-		app.def = def;
-		defMsgMap = copyArrayToMap(app.def.messages);
-		defCharMap = copyArrayToMap(app.def.characters);
-		defGrpMap = copyArrayToMap(app.def.menuGroups);
-		defOptMap = copyArrayToMap(app.def.menuOptions);
-	}
-
-	window.onload=loaded;
-</script>
-	<link href="translations.css" rel="stylesheet" type="text/css">
-	</head>
-	<body>
-
-		<div id="app">
-			<h1>TS100 Translation Parser</h1>
-			<table class="header data">
-				<tr>
-					<td class="label">Translation.cpp</td>
-					<td class="value">
-						<input type="file" id="translation-cpp-file" onchange="translationFileSelected(this)" accept=".cpp">
-					</td>
-				</tr>
-			</table>
-			
-			<div class="data" v-if="done">
-				<div class="value" v-for="lang in languages" :id="'row_'+lang">
-					<input type="button" :value="'Save '+lang" v-on:click="vSave(lang)">
-					<input type="button" :value="'View '+lang" v-on:click="vView(lang)">
-				</div>
-			</div>
-				
-		</div>
-	</body>
-</html>

Translation Editor/fontTables.py

@@ -1,844 +0,0 @@
-#coding=utf-8
-def getFontMap():
-    font = {
-        " ":"0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,",
-        "!":"0x00,0x00,0x00,0x00,0x7C,0xFF,0xFF,0x7C,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x33,0x33,0x00,0x00,0x00,0x00,0x00," ,
-        "\"":"0x00,0x00,0x00,0x3C,0x3C,0x00,0x00,0x3C,0x3C,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,",
-        "#":"0x00,0x00,0x10,0x90,0xF0,0x7E,0x1E,0x90,0xF0,0x7E,0x1E,0x10,0x00,0x02,0x1E,0x1F,0x03,0x02,0x1E,0x1F,0x03,0x02,0x00,0x00," ,
-        "$":"0x00,0x00,0x78,0xFC,0xCC,0xFF,0xFF,0xCC,0xCC,0x88,0x00,0x00,0x00,0x00,0x04,0x0C,0x0C,0x3F,0x3F,0x0C,0x0F,0x07,0x00,0x00," ,
-        "%":"0x00,0x00,0x38,0x38,0x38,0x00,0x80,0xC0,0xE0,0x70,0x38,0x1C,0x00,0x30,0x38,0x1C,0x0E,0x07,0x03,0x01,0x38,0x38,0x38,0x00," ,
-        "&":"0x00,0x00,0x00,0xB8,0xFC,0xC6,0xE2,0x3E,0x1C,0x00,0x00,0x00,0x00,0x00,0x1F,0x3F,0x31,0x21,0x37,0x1E,0x1C,0x36,0x22,0x00," ,
-        "'":"0x00,0x00,0x00,0x00,0x27,0x3F,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00," ,
-        "(":"0x00,0x00,0x00,0xF0,0xFC,0xFE,0x07,0x01,0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x03,0x0F,0x1F,0x38,0x20,0x20,0x00,0x00,0x00," ,
-        "(":"0x00,0x00,0x00,0xF0,0xFC,0xFE,0x07,0x01,0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x03,0x0F,0x1F,0x38,0x20,0x20,0x00,0x00,0x00," ,
-        ")":"0x00,0x00,0x00,0x01,0x01,0x07,0xFE,0xFC,0xF0,0x00,0x00,0x00,0x00,0x00,0x00,0x20,0x20,0x38,0x1F,0x0F,0x03,0x00,0x00,0x00," ,
-        ")":"0x00,0x00,0x00,0x01,0x01,0x07,0xFE,0xFC,0xF0,0x00,0x00,0x00,0x00,0x00,0x00,0x20,0x20,0x38,0x1F,0x0F,0x03,0x00,0x00,0x00," ,
-        "*":"0x00,0x00,0x98,0xB8,0xE0,0xF8,0xF8,0xE0,0xB8,0x98,0x00,0x00,0x00,0x00,0x0C,0x0E,0x03,0x0F,0x0F,0x03,0x0E,0x0C,0x00,0x00," ,
-        "+":"0x00,0x00,0x80,0x80,0x80,0xF0,0xF0,0x80,0x80,0x80,0x00,0x00,0x00,0x00,0x01,0x01,0x01,0x0F,0x0F,0x01,0x01,0x01,0x00,0x00," ,
-        ",":"0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xB8,0xF8,0x78,0x00,0x00,0x00,0x00,0x00," ,
-        "-":"0x00,0x00,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x00,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x00,0x00," ,
-        ".":"0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x38,0x38,0x38,0x00,0x00,0x00,0x00,0x00," ,
-        "/":"0x00,0x00,0x00,0x00,0x00,0x80,0xC0,0xE0,0x70,0x38,0x1C,0x0E,0x00,0x18,0x1C,0x0E,0x07,0x03,0x01,0x00,0x00,0x00,0x00,0x00," ,
-        "0":"0x00,0xF8,0xFE,0x06,0x03,0x83,0xC3,0x63,0x33,0x1E,0xFE,0xF8,0x00,0x07,0x1F,0x1E,0x33,0x31,0x30,0x30,0x30,0x18,0x1F,0x07," ,
-        "1":"0x00,0x00,0x00,0x0C,0x0C,0x0E,0xFF,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x30,0x3F,0x3F,0x30,0x30,0x30,0x00," ,
-        "2":"0x00,0x1C,0x1E,0x07,0x03,0x03,0x83,0xC3,0xE3,0x77,0x3E,0x1C,0x00,0x30,0x38,0x3C,0x3E,0x37,0x33,0x31,0x30,0x30,0x30,0x30," ,
-        "3":"0x00,0x0C,0x0E,0x07,0xC3,0xC3,0xC3,0xC3,0xC3,0xE7,0x7E,0x3C,0x00,0x0C,0x1C,0x38,0x30,0x30,0x30,0x30,0x30,0x39,0x1F,0x0E," ,
-        "З":"0x00,0x0C,0x0E,0x07,0xC3,0xC3,0xC3,0xC3,0xC3,0xE7,0x7E,0x3C,0x00,0x0C,0x1C,0x38,0x30,0x30,0x30,0x30,0x30,0x39,0x1F,0x0E," ,
-        "4":"0x00,0xC0,0xE0,0x70,0x38,0x1C,0x0E,0x07,0xFF,0xFF,0x00,0x00,0x00,0x03,0x03,0x03,0x03,0x03,0x03,0x03,0x3F,0x3F,0x03,0x03," ,
-        "5":"0x00,0x3F,0x7F,0x63,0x63,0x63,0x63,0x63,0x63,0xE3,0xC3,0x83,0x00,0x0C,0x1C,0x38,0x30,0x30,0x30,0x30,0x30,0x38,0x1F,0x0F," ,
-        "6":"0x00,0xC0,0xF0,0xF8,0xDC,0xCE,0xC7,0xC3,0xC3,0xC3,0x80,0x00,0x00,0x0F,0x1F,0x39,0x30,0x30,0x30,0x30,0x30,0x39,0x1F,0x0F," ,
-        "7":"0x00,0x03,0x03,0x03,0x03,0x03,0x03,0xC3,0xF3,0x3F,0x0F,0x03,0x00,0x00,0x00,0x00,0x30,0x3C,0x0F,0x03,0x00,0x00,0x00,0x00," ,
-        "8":"0x00,0x00,0xBC,0xFE,0xE7,0xC3,0xC3,0xC3,0xE7,0xFE,0xBC,0x00,0x00,0x0F,0x1F,0x39,0x30,0x30,0x30,0x30,0x30,0x39,0x1F,0x0F," ,
-        "9":"0x00,0x3C,0x7E,0xE7,0xC3,0xC3,0xC3,0xC3,0xC3,0xE7,0xFE,0xFC,0x00,0x00,0x00,0x30,0x30,0x30,0x38,0x1C,0x0E,0x07,0x03,0x00," ,
-        ":":"0x00,0x00,0x00,0x00,0x70,0x70,0x70,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x1C,0x1C,0x1C,0x00,0x00,0x00,0x00,0x00," ,
-        ":":"0x00,0x00,0x00,0x00,0x70,0x70,0x70,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x1C,0x1C,0x1C,0x00,0x00,0x00,0x00,0x00," ,
-        ";":"0x00,0x00,0x00,0x00,0x70,0x70,0x70,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x9C,0xFC,0x7C,0x00,0x00,0x00,0x00,0x00," ,
-        "<":"0x00,0x00,0xC0,0xE0,0xF0,0x38,0x1C,0x0E,0x07,0x03,0x00,0x00,0x00,0x00,0x00,0x01,0x03,0x07,0x0E,0x1C,0x38,0x30,0x00,0x00," ,
-        "=":"0x00,0x00,0x60,0x60,0x60,0x60,0x60,0x60,0x60,0x60,0x60,0x00,0x00,0x00,0x06,0x06,0x06,0x06,0x06,0x06,0x06,0x06,0x06,0x00," ,
-        ">":"0x00,0x00,0x03,0x07,0x0E,0x1C,0x38,0xF0,0xE0,0xC0,0x00,0x00,0x00,0x00,0x30,0x38,0x1C,0x0E,0x07,0x03,0x01,0x00,0x00,0x00," ,
-        "?":"0x00,0x1C,0x1E,0x07,0x03,0x83,0xC3,0xE3,0x77,0x3E,0x1C,0x00,0x00,0x00,0x00,0x00,0x00,0x37,0x37,0x00,0x00,0x00,0x00,0x00," ,
-        "@":"0x00,0xF8,0xFE,0x07,0xF3,0xFB,0x1B,0xFB,0xFB,0x07,0xFE,0xF8,0x00,0x0F,0x1F,0x18,0x33,0x37,0x36,0x37,0x37,0x36,0x03,0x01," ,
-        "A":"0x00,0x00,0x00,0xE0,0xFC,0x1F,0x1F,0xFC,0xE0,0x00,0x00,0x00,0x00,0x38,0x3F,0x07,0x06,0x06,0x06,0x06,0x07,0x3F,0x38,0x00," ,
-        "А":"0x00,0x00,0x00,0xE0,0xFC,0x1F,0x1F,0xFC,0xE0,0x00,0x00,0x00,0x00,0x38,0x3F,0x07,0x06,0x06,0x06,0x06,0x07,0x3F,0x38,0x00," ,
-        "B":"0x00,0xFF,0xFF,0xC3,0xC3,0xC3,0xC3,0xE7,0xFE,0xBC,0x00,0x00,0x00,0x3F,0x3F,0x30,0x30,0x30,0x30,0x30,0x39,0x1F,0x0F,0x00," ,
-        "C":"0x00,0xF0,0xFC,0x0E,0x07,0x03,0x03,0x03,0x07,0x0E,0x0C,0x00,0x00,0x03,0x0F,0x1C,0x38,0x30,0x30,0x30,0x38,0x1C,0x0C,0x00," ,
-        "D":"0x00,0xFF,0xFF,0x03,0x03,0x03,0x03,0x07,0x0E,0xFC,0xF0,0x00,0x00,0x3F,0x3F,0x30,0x30,0x30,0x30,0x38,0x1C,0x0F,0x03,0x00," ,
-        "E":"0x00,0xFF,0xFF,0xC3,0xC3,0xC3,0xC3,0xC3,0xC3,0x03,0x03,0x00,0x00,0x3F,0x3F,0x30,0x30,0x30,0x30,0x30,0x30,0x30,0x30,0x00," ,
-        "E":"0x00,0xFF,0xFF,0xC3,0xC3,0xC3,0xC3,0xC3,0xC3,0x03,0x03,0x00,0x00,0x3F,0x3F,0x30,0x30,0x30,0x30,0x30,0x30,0x30,0x30,0x00," ,
-        "F":"0x00,0xFF,0xFF,0xC3,0xC3,0xC3,0xC3,0xC3,0xC3,0x03,0x03,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00," ,
-        "G":"0x00,0xF0,0xFC,0x0E,0x07,0x03,0xC3,0xC3,0xC3,0xC7,0xC6,0x00,0x00,0x03,0x0F,0x1C,0x38,0x30,0x30,0x30,0x30,0x3F,0x3F,0x00," ,
-        "H":"0x00,0xFF,0xFF,0xC0,0xC0,0xC0,0xC0,0xC0,0xC0,0xFF,0xFF,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x00," ,
-        "I":"0x00,0x00,0x00,0x03,0x03,0xFF,0xFF,0x03,0x03,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x3F,0x3F,0x30,0x30,0x00,0x00,0x00," ,
-        "J":"0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0xFF,0x00,0x00,0x0E,0x1E,0x38,0x30,0x30,0x30,0x30,0x38,0x1F,0x07,0x00," ,
-        "K":"0x00,0xFF,0xFF,0xC0,0xE0,0xF0,0x38,0x1C,0x0E,0x07,0x03,0x00,0x00,0x3F,0x3F,0x00,0x01,0x03,0x07,0x0E,0x1C,0x38,0x30,0x00," ,
-        "L":"0x00,0xFF,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x30,0x30,0x30,0x30,0x30,0x30,0x30,0x30,0x00," ,
-        "M":"0x00,0xFF,0xFF,0x1E,0x78,0xE0,0xE0,0x78,0x1E,0xFF,0xFF,0x00,0x00,0x3F,0x3F,0x00,0x00,0x01,0x01,0x00,0x00,0x3F,0x3F,0x00," ,
-        "N":"0x00,0xFF,0xFF,0x0E,0x38,0xF0,0xC0,0x00,0x00,0xFF,0xFF,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0x03,0x07,0x1C,0x3F,0x3F,0x00," ,
-        "O":"0x00,0xF0,0xFC,0x0E,0x07,0x03,0x03,0x07,0x0E,0xFC,0xF0,0x00,0x00,0x03,0x0F,0x1C,0x38,0x30,0x30,0x38,0x1C,0x0F,0x03,0x00," ,
-        "P":"0x00,0xFF,0xFF,0x83,0x83,0x83,0x83,0x83,0xC7,0xFE,0x7C,0x00,0x00,0x3F,0x3F,0x01,0x01,0x01,0x01,0x01,0x01,0x00,0x00,0x00," ,
-        "Р":"0x00,0xFF,0xFF,0x83,0x83,0x83,0x83,0x83,0xC7,0xFE,0x7C,0x00,0x00,0x3F,0x3F,0x01,0x01,0x01,0x01,0x01,0x01,0x00,0x00,0x00," ,
-        "Q":"0x00,0xF0,0xFC,0x0E,0x07,0x03,0x03,0x07,0x0E,0xFC,0xF0,0x00,0x00,0x03,0x0F,0x1C,0x38,0x30,0x36,0x3E,0x1C,0x3F,0x33,0x00," ,
-        "R":"0x00,0xFF,0xFF,0x83,0x83,0x83,0x83,0x83,0xC7,0xFE,0x7C,0x00,0x00,0x3F,0x3F,0x01,0x01,0x03,0x07,0x0F,0x1D,0x38,0x30,0x00," ,
-        "S":"0x00,0x3C,0x7E,0xE7,0xC3,0xC3,0xC3,0xC3,0xC7,0x8E,0x0C,0x00,0x00,0x0C,0x1C,0x38,0x30,0x30,0x30,0x30,0x39,0x1F,0x0F,0x00," ,
-        "T":"0x00,0x00,0x03,0x03,0x03,0xFF,0xFF,0x03,0x03,0x03,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0x00,0x00," ,
-        "U":"0x00,0xFF,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0xFF,0x00,0x00,0x07,0x1F,0x38,0x30,0x30,0x30,0x30,0x38,0x1F,0x07,0x00," ,
-        "V":"0x00,0x07,0x3F,0xF8,0xC0,0x00,0x00,0xC0,0xF8,0x3F,0x07,0x00,0x00,0x00,0x00,0x01,0x0F,0x3E,0x3E,0x0F,0x01,0x00,0x00,0x00," ,
-        "W":"0x00,0xFF,0xFF,0x00,0x00,0x80,0x80,0x00,0x00,0xFF,0xFF,0x00,0x00,0x3F,0x3F,0x1C,0x06,0x03,0x03,0x06,0x1C,0x3F,0x3F,0x00," ,
-        "X":"0x00,0x03,0x0F,0x1C,0x30,0xE0,0xE0,0x30,0x1C,0x0F,0x03,0x00,0x00,0x30,0x3C,0x0E,0x03,0x01,0x01,0x03,0x0E,0x3C,0x30,0x00," ,
-        "Y":"0x00,0x03,0x0F,0x3C,0xF0,0xC0,0xC0,0xF0,0x3C,0x0F,0x03,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0x00,0x00," ,
-        "Z":"0x00,0x03,0x03,0x03,0x03,0xC3,0xE3,0x33,0x1F,0x0F,0x03,0x00,0x00,0x30,0x3C,0x3E,0x33,0x31,0x30,0x30,0x30,0x30,0x30,0x00," ,
-        "Z":"0x00,0x03,0x03,0x03,0x03,0xC3,0xE3,0x33,0x1F,0x0F,0x03,0x00,0x00,0x30,0x3C,0x3E,0x33,0x31,0x30,0x30,0x30,0x30,0x30,0x00," ,
-        "[":"0x00,0x00,0x00,0xFF,0xFF,0x03,0x03,0x03,0x03,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x30,0x30,0x30,0x30,0x00,0x00,0x00," ,
-        "\\":"0x00,0x0E,0x1C,0x38,0x70,0xE0,0xC0,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x03,0x07,0x0E,0x1C,0x18,",  
-        "\\":"0x00,0x0E,0x1C,0x38,0x70,0xE0,0xC0,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x03,0x07,0x0E,0x1C,0x18,",  
-        "]":"0x00,0x00,0x00,0x03,0x03,0x03,0x03,0xFF,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x30,0x30,0x3F,0x3F,0x00,0x00,0x00," ,
-        "^":"0x00,0x60,0x70,0x38,0x1C,0x0E,0x07,0x0E,0x1C,0x38,0x70,0x60,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00," ,
-        "_":"0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xC0,0xC0,0xC0,0xC0,0xC0,0xC0,0xC0,0xC0,0xC0,0xC0,0xC0," ,
-        "`":"0x00,0x00,0x00,0x00,0x00,0x3E,0x7E,0x4E,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00," ,
-        "a":"0x00,0x00,0x40,0x60,0x60,0x60,0x60,0x60,0x60,0xE0,0xC0,0x00,0x00,0x1C,0x3E,0x33,0x33,0x33,0x33,0x33,0x33,0x3F,0x3F,0x00," ,
-        "b":"0x00,0xFF,0xFF,0xC0,0x60,0x60,0x60,0x60,0xE0,0xC0,0x80,0x00,0x00,0x3F,0x3F,0x30,0x30,0x30,0x30,0x30,0x38,0x1F,0x0F,0x00," ,
-        "c":"0x00,0x80,0xC0,0xE0,0x60,0x60,0x60,0x60,0x60,0xC0,0x80,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x30,0x18,0x08,0x00," ,
-        "d":"0x00,0x80,0xC0,0xE0,0x60,0x60,0x60,0xE0,0xC0,0xFF,0xFF,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x30,0x3F,0x3F,0x00," ,
-        "e":"0x00,0x80,0xC0,0xE0,0x60,0x60,0x60,0x60,0x60,0xC0,0x80,0x00,0x00,0x0F,0x1F,0x3B,0x33,0x33,0x33,0x33,0x33,0x13,0x01,0x00," ,
-        "f":"0x00,0xC0,0xC0,0xFC,0xFE,0xC7,0xC3,0xC3,0x03,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0x00,0x00,0x00,0x00," ,
-        "g":"0x00,0x80,0xC0,0xE0,0x60,0x60,0x60,0x60,0x60,0xE0,0xE0,0x00,0x00,0x03,0xC7,0xCE,0xCC,0xCC,0xCC,0xCC,0xE6,0x7F,0x3F,0x00," ,
-        "h":"0x00,0xFF,0xFF,0xC0,0x60,0x60,0x60,0xE0,0xC0,0x80,0x00,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x00,0x00," ,
-        "i":"0x00,0x00,0x00,0x00,0x60,0xEC,0xEC,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x3F,0x3F,0x30,0x30,0x00,0x00,0x00," ,
-        "j":"0x00,0x00,0x00,0x00,0x00,0x00,0x60,0xEC,0xEC,0x00,0x00,0x00,0x00,0x00,0x00,0x60,0xE0,0xC0,0xC0,0xFF,0x7F,0x00,0x00,0x00," ,
-        "k":"0x00,0x00,0xFF,0xFF,0x00,0x80,0xC0,0xE0,0x60,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x03,0x07,0x0F,0x1C,0x38,0x30,0x00,0x00," ,
-        "l":"0x00,0x00,0x00,0x00,0x03,0xFF,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x3F,0x3F,0x30,0x30,0x00,0x00,0x00," ,
-        "m":"0x00,0xE0,0xC0,0xE0,0xE0,0xC0,0xC0,0xE0,0xE0,0xC0,0x80,0x00,0x00,0x3F,0x3F,0x00,0x00,0x3F,0x3F,0x00,0x00,0x3F,0x3F,0x00," ,
-        "n":"0x00,0x00,0xE0,0xE0,0x60,0x60,0x60,0x60,0xE0,0xC0,0x80,0x00,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x00," ,
-        "o":"0x00,0x80,0xC0,0xE0,0x60,0x60,0x60,0x60,0xE0,0xC0,0x80,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x38,0x1F,0x0F,0x00," ,
-        "p":"0x00,0xE0,0xE0,0x60,0x60,0x60,0x60,0x60,0xE0,0xC0,0x80,0x00,0x00,0xFF,0xFF,0x0C,0x18,0x18,0x18,0x18,0x1C,0x0F,0x07,0x00," ,
-        "q":"0x00,0x80,0xC0,0xE0,0x60,0x60,0x60,0x60,0x60,0xE0,0xE0,0x00,0x00,0x07,0x0F,0x1C,0x18,0x18,0x18,0x18,0x0C,0xFF,0xFF,0x00," ,
-        "r":"0x00,0x00,0xE0,0xE0,0xC0,0x60,0x60,0x60,0x60,0xE0,0xC0,0x00,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00," ,
-        "s":"0x00,0xC0,0xE0,0x60,0x60,0x60,0x60,0x60,0x40,0x00,0x00,0x00,0x00,0x11,0x33,0x33,0x33,0x33,0x33,0x3F,0x1E,0x00,0x00,0x00," ,
-        "t":"0x00,0x60,0x60,0xFE,0xFE,0x60,0x60,0x60,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x1F,0x3F,0x30,0x30,0x30,0x30,0x00,0x00,0x00," ,
-        "u":"0x00,0xE0,0xE0,0x00,0x00,0x00,0x00,0x00,0x00,0xE0,0xE0,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x18,0x3F,0x3F,0x00," ,
-        "v":"0x00,0x60,0xE0,0x80,0x00,0x00,0x00,0x00,0x80,0xE0,0x60,0x00,0x00,0x00,0x01,0x07,0x1E,0x38,0x38,0x1E,0x07,0x01,0x00,0x00," ,
-        "w":"0x00,0xE0,0xE0,0x00,0x00,0xE0,0xE0,0x00,0x00,0xE0,0xE0,0x00,0x00,0x07,0x1F,0x38,0x1C,0x0F,0x0F,0x1C,0x38,0x1F,0x07,0x00," ,
-        "x":"0x00,0x60,0xE0,0xC0,0x80,0x00,0x80,0xC0,0xE0,0x60,0x00,0x00,0x00,0x30,0x38,0x1D,0x0F,0x07,0x0F,0x1D,0x38,0x30,0x00,0x00," ,
-        "y":"0x00,0x00,0x60,0xE0,0x80,0x00,0x00,0x80,0xE0,0x60,0x00,0x00,0x00,0x00,0x00,0x81,0xE7,0x7E,0x1E,0x07,0x01,0x00,0x00,0x00," ,
-        "z":"0x00,0x60,0x60,0x60,0x60,0x60,0xE0,0xE0,0x60,0x20,0x00,0x00,0x00,0x30,0x38,0x3C,0x36,0x33,0x31,0x30,0x30,0x30,0x00,0x00," ,
-        "z":"0x00,0x60,0x60,0x60,0x60,0x60,0xE0,0xE0,0x60,0x20,0x00,0x00,0x00,0x30,0x38,0x3C,0x36,0x33,0x31,0x30,0x30,0x30,0x00,0x00," ,
-        "{":"0x00,0x00,0x80,0xC0,0xFC,0x7E,0x07,0x03,0x03,0x03,0x00,0x00,0x00,0x00,0x00,0x01,0x1F,0x3F,0x70,0x60,0x60,0x60,0x00,0x00," ,
-        "|":"0x00,0x00,0x00,0x00,0x00,0xFF,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0x00,0x00," ,
-        "}":"0x00,0x00,0x03,0x03,0x03,0x07,0x7E,0xFC,0xC0,0x80,0x00,0x00,0x00,0x00,0x60,0x60,0x60,0x70,0x3F,0x1F,0x01,0x00,0x00,0x00," ,
-        "~":"0x00,0x10,0x18,0x0C,0x04,0x0C,0x18,0x10,0x18,0x0C,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00," ,
-        "¡":"0x00,0x00,0x00,0x00,0x80,0xF3,0xF3,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0F,0x3F,0x3F,0x0F,0x00,0x00,0x00,0x00," ,
-        "¢":"0x00,0x00,0xE0,0xF0,0x38,0xFE,0xFE,0x18,0x38,0x30,0x00,0x00,0x00,0x00,0x03,0x07,0x0E,0x3F,0x3F,0x0C,0x0E,0x06,0x00,0x00," ,
-        "£":"0x00,0x00,0x00,0x80,0xF8,0xFC,0x8C,0x8C,0x1C,0x18,0x00,0x00,0x00,0x00,0x18,0x1C,0x1F,0x0B,0x18,0x18,0x18,0x18,0x08,0x00," ,
-        "¤":"0x00,0xF6,0xFE,0x18,0x0C,0x0C,0x0C,0x0C,0x18,0xFE,0xF6,0x00,0x00,0x1B,0x1F,0x06,0x0C,0x0C,0x0C,0x0C,0x06,0x1F,0x1B,0x00," ,
-        "¥":"0x00,0x03,0x0F,0x3C,0xF0,0xC0,0xC0,0xF0,0x3C,0x0F,0x03,0x00,0x00,0x00,0x0A,0x0A,0x0A,0x3F,0x3F,0x0A,0x0A,0x0A,0x00,0x00," ,
-        "¦":"0x00,0x00,0x00,0x00,0x00,0x1F,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0x00,0x00," ,
-        "§":"0x00,0x00,0xDC,0xFE,0x22,0x22,0x22,0x22,0xE6,0xC4,0x00,0x00,0x00,0x00,0x08,0x19,0x11,0x11,0x11,0x11,0x1F,0x0E,0x00,0x00," ,
-        "¨":"0x00,0x00,0x00,0x03,0x03,0x00,0x00,0x03,0x03,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00," ,
-        "©":"0x00,0xF0,0xF8,0x1C,0xCC,0xEC,0x2C,0x6C,0x4C,0x1C,0xF8,0xF0,0x00,0x07,0x0F,0x1C,0x19,0x1B,0x1A,0x1B,0x19,0x1C,0x0F,0x07," ,
-        "«":"0x00,0x80,0xC0,0x60,0x20,0x00,0x80,0xC0,0x60,0x20,0x00,0x00,0x00,0x00,0x01,0x03,0x02,0x00,0x00,0x01,0x03,0x02,0x00,0x00," ,
-        "¬":"0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0xF8,0xF8,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x03,0x03,0x00," ,
-        "®":"0x00,0xF0,0xF8,0x1C,0xEC,0xEC,0xAC,0xEC,0x4C,0x1C,0xF8,0xF0,0x00,0x07,0x0F,0x1C,0x1B,0x1B,0x18,0x1B,0x1B,0x1C,0x0F,0x07," ,
-        "¯":"0x00,0x00,0x00,0x00,0x00,0x0C,0x0C,0x0C,0x0C,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00," ,
-        "°":"0x00,0x00,0x00,0x1E,0x3F,0x33,0x33,0x3F,0x1E,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00," ,
-        "±":"0x00,0x00,0x00,0xC0,0xC0,0xF0,0xF0,0xC0,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x18,0x18,0x1B,0x1B,0x18,0x18,0x00,0x00,0x00," ,
-        "²":"0x00,0x00,0x19,0x1D,0x15,0x17,0x12,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00," ,
-        "³":"0x00,0x00,0x11,0x15,0x15,0x1F,0x0A,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00," ,
-        "´":"0x00,0x00,0x00,0x00,0x04,0x06,0x03,0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00," ,
-        "µ":"0x00,0xF0,0xF0,0x00,0x00,0x00,0x00,0x00,0xF0,0xF0,0x00,0x00,0x00,0xFF,0xFF,0x0E,0x0C,0x0C,0x0C,0x06,0x0F,0x0F,0x00,0x00," ,
-        "¶":"0x00,0x38,0x7C,0xC6,0x82,0xFE,0xFE,0x02,0xFE,0xFE,0x02,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x00,0x3F,0x3F,0x00,0x00," ,
-        "¹":"0x00,0x00,0x12,0x1F,0x1F,0x10,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00," ,
-        "»":"0x00,0x20,0x60,0xC0,0x80,0x00,0x20,0x60,0xC0,0x80,0x00,0x00,0x00,0x02,0x03,0x01,0x00,0x00,0x02,0x03,0x01,0x00,0x00,0x00," ,
-        "¼":"0x00,0x48,0x7C,0x7C,0x40,0x80,0xC0,0x60,0x30,0x10,0x00,0x00,0x00,0x00,0x04,0x06,0x03,0x01,0x06,0x07,0x04,0x1F,0x1F,0x00," ,
-        "½":"0x00,0x48,0x7C,0x7C,0x40,0x80,0xC0,0x60,0x30,0x10,0x00,0x00,0x00,0x00,0x04,0x06,0x03,0x01,0x00,0x19,0x1D,0x17,0x12,0x00," ,
-        "¾":"0x00,0x44,0x54,0x7C,0x28,0x80,0xC0,0x60,0x30,0x10,0x00,0x00,0x00,0x00,0x04,0x06,0x03,0x01,0x06,0x07,0x04,0x1F,0x1F,0x00," ,
-        "¿":"0x00,0x00,0x00,0x80,0xC0,0xFB,0x7B,0x00,0x00,0x00,0x00,0x00,0x00,0x0E,0x1F,0x3B,0x31,0x30,0x30,0x30,0x38,0x1E,0x0E,0x00," ,
-        "À":"0x00,0x00,0x00,0x80,0xE1,0x7B,0x7E,0xE4,0x80,0x00,0x00,0x00,0x00,0x38,0x3E,0x0F,0x0D,0x0C,0x0C,0x0D,0x0F,0x3E,0x38,0x00," ,
-        "Á":"0x00,0x00,0x00,0x80,0xE4,0x7E,0x7B,0xE1,0x80,0x00,0x00,0x00,0x00,0x38,0x3E,0x0F,0x0D,0x0C,0x0C,0x0D,0x0F,0x3E,0x38,0x00," ,
-        "Â":"0x00,0x00,0x00,0x84,0xE6,0x7B,0x7B,0xE6,0x84,0x00,0x00,0x00,0x00,0x38,0x3E,0x0F,0x0D,0x0C,0x0C,0x0D,0x0F,0x3E,0x38,0x00," ,
-        "Ã":"0x00,0x00,0x00,0x82,0xE3,0x79,0x7B,0xE2,0x83,0x01,0x00,0x00,0x00,0x38,0x3E,0x0F,0x0D,0x0C,0x0C,0x0D,0x0F,0x3E,0x38,0x00," ,
-        "Ä":"0x00,0x00,0x00,0x83,0xE3,0x78,0x78,0xE3,0x83,0x00,0x00,0x00,0x00,0x38,0x3E,0x0F,0x0D,0x0C,0x0C,0x0D,0x0F,0x3E,0x38,0x00," ,
-        "Å":"0x00,0x00,0x00,0x80,0xE2,0x75,0x75,0xE2,0x80,0x00,0x00,0x00,0x00,0x38,0x3E,0x0F,0x0D,0x0C,0x0C,0x0D,0x0F,0x3E,0x38,0x00," ,
-        "Æ":"0x00,0x00,0x80,0xF0,0x7C,0x1F,0xFF,0xFF,0xC3,0xC3,0x03,0x00,0x00,0x3C,0x3F,0x07,0x06,0x06,0x3F,0x3F,0x30,0x30,0x30,0x00," ,
-        "Ç":"0x00,0xF0,0xFC,0x0E,0x07,0x03,0x03,0x03,0x07,0x1E,0x1C,0x00,0x00,0x01,0x07,0xCE,0xDC,0xF8,0xF8,0x18,0x1C,0x0E,0x06,0x00," ,
-        "È":"0x00,0xF8,0xF8,0x99,0x9B,0x9E,0x9C,0x98,0x98,0x18,0x18,0x00,0x00,0x3F,0x3F,0x31,0x31,0x31,0x31,0x31,0x31,0x30,0x30,0x00," ,
-        "É":"0x00,0xF8,0xF8,0x98,0x98,0x9C,0x9E,0x9B,0x99,0x18,0x18,0x00,0x00,0x3F,0x3F,0x31,0x31,0x31,0x31,0x31,0x31,0x30,0x30,0x00," ,
-        "Ê":"0x00,0xF8,0xF8,0x9C,0x9E,0x9B,0x9B,0x9E,0x9C,0x18,0x18,0x00,0x00,0x3F,0x3F,0x31,0x31,0x31,0x31,0x31,0x31,0x30,0x30,0x00," ,
-        "Ë":"0x00,0xF8,0xF8,0x9B,0x9B,0x98,0x98,0x9B,0x9B,0x18,0x18,0x00,0x00,0x3F,0x3F,0x31,0x31,0x31,0x31,0x31,0x31,0x30,0x30,0x00," ,
-        "Ì":"0x00,0x00,0x00,0x19,0x1B,0xFE,0xFC,0x18,0x18,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x3F,0x3F,0x30,0x30,0x00,0x00,0x00," ,
-        "Í":"0x00,0x00,0x00,0x18,0x18,0xFC,0xFE,0x1B,0x19,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x3F,0x3F,0x30,0x30,0x00,0x00,0x00," ,
-        "Î":"0x00,0x00,0x00,0x1C,0x1E,0xFB,0xFB,0x1E,0x1C,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x3F,0x3F,0x30,0x30,0x00,0x00,0x00," ,
-        "Ï":"0x00,0x00,0x00,0x1B,0x1B,0xF8,0xF8,0x1B,0x1B,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x3F,0x3F,0x30,0x30,0x00,0x00,0x00," ,
-        "Ð":"0x00,0xC0,0xFF,0xFF,0xC3,0x03,0x03,0x07,0x0E,0xFC,0xF0,0x00,0x00,0x00,0x3F,0x3F,0x30,0x30,0x30,0x38,0x1C,0x0F,0x03,0x00," ,
-        "Ñ":"0x00,0xF8,0xF8,0x72,0xE3,0xC1,0x83,0x02,0x03,0xF9,0xF8,0x00,0x00,0x3F,0x3F,0x00,0x00,0x01,0x03,0x07,0x0E,0x3F,0x3F,0x00," ,
-        "Ò":"0x00,0xE0,0xF0,0x39,0x1B,0x1E,0x1C,0x18,0x38,0xF0,0xE0,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x38,0x1F,0x0F,0x00," ,
-        "Ó":"0x00,0xE0,0xF0,0x38,0x18,0x1C,0x1E,0x1B,0x39,0xF0,0xE0,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x38,0x1F,0x0F,0x00," ,
-        "Ô":"0x00,0xE0,0xF0,0x3C,0x1E,0x1B,0x1B,0x1E,0x3C,0xF0,0xE0,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x38,0x1F,0x0F,0x00," ,
-        "Õ":"0x00,0xE0,0xF0,0x3A,0x1B,0x19,0x1B,0x1A,0x3B,0xF1,0xE0,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x38,0x1F,0x0F,0x00," ,
-        "Ö":"0x00,0xE0,0xF0,0x3B,0x1B,0x18,0x18,0x1B,0x3B,0xF0,0xE0,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x38,0x1F,0x0F,0x00," ,
-        "×":"0x00,0xF0,0xF8,0x1C,0x0C,0x8C,0xEC,0x7C,0x18,0xFC,0xF4,0x00,0x00,0x2F,0x3F,0x18,0x3E,0x37,0x31,0x30,0x38,0x1F,0x0F,0x00," ,
-        "Ù":"0x00,0xF8,0xF8,0x01,0x03,0x06,0x04,0x00,0x00,0xF8,0xF8,0x00,0x00,0x07,0x1F,0x38,0x30,0x30,0x30,0x30,0x38,0x1F,0x07,0x00," ,
-        "Ú":"0x00,0xF8,0xF8,0x00,0x00,0x04,0x06,0x03,0x01,0xF8,0xF8,0x00,0x00,0x07,0x1F,0x38,0x30,0x30,0x30,0x30,0x38,0x1F,0x07,0x00," ,
-        "Û":"0x00,0xF8,0xF8,0x04,0x06,0x03,0x03,0x06,0x04,0xF8,0xF8,0x00,0x00,0x07,0x1F,0x38,0x30,0x30,0x30,0x30,0x38,0x1F,0x07,0x00," ,
-        "Ü":"0x00,0xF8,0xF8,0x03,0x03,0x00,0x00,0x03,0x03,0xF8,0xF8,0x00,0x00,0x07,0x1F,0x38,0x30,0x30,0x30,0x30,0x38,0x1F,0x07,0x00," ,
-        "Ý":"0x00,0x08,0x18,0x30,0x60,0xC4,0xC6,0x63,0x31,0x18,0x08,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0x00,0x00," ,
-        "ß":"0x00,0x00,0xC0,0xE0,0x30,0x10,0x10,0x30,0xE0,0xC0,0x00,0x00,0x00,0x00,0xFF,0xFF,0x21,0x21,0x21,0x33,0x3F,0x1E,0x00,0x00," ,
-        "à":"0x00,0x00,0x40,0x60,0x62,0x66,0x6C,0x68,0x60,0xE0,0xC0,0x00,0x00,0x1C,0x3E,0x33,0x33,0x33,0x33,0x33,0x33,0x3F,0x3F,0x00," ,
-        "á":"0x00,0x00,0x40,0x60,0x68,0x6C,0x66,0x62,0x60,0xE0,0xC0,0x00,0x00,0x1C,0x3E,0x33,0x33,0x33,0x33,0x33,0x33,0x3F,0x3F,0x00," ,
-        "â":"0x00,0x00,0x40,0x68,0x6C,0x66,0x66,0x6C,0x68,0xE0,0xC0,0x00,0x00,0x1C,0x3E,0x33,0x33,0x33,0x33,0x33,0x33,0x3F,0x3F,0x00," ,
-        "ã":"0x00,0x00,0x40,0x68,0x6C,0x64,0x6C,0x68,0x6C,0xE4,0xC0,0x00,0x00,0x1C,0x3E,0x33,0x33,0x33,0x33,0x33,0x33,0x3F,0x3F,0x00," ,
-        "ä":"0x00,0x00,0x40,0x6C,0x6C,0x60,0x60,0x6C,0x6C,0xE0,0xC0,0x00,0x00,0x1C,0x3E,0x33,0x33,0x33,0x33,0x33,0x33,0x3F,0x3F,0x00," ,
-        "å":"0x00,0x00,0x40,0x60,0x64,0x6A,0x6A,0x64,0x60,0xE0,0xC0,0x00,0x00,0x1C,0x3E,0x33,0x33,0x33,0x33,0x33,0x33,0x3F,0x3F,0x00," ,
-        "æ":"0x00,0x80,0xC0,0x40,0x40,0xC0,0x80,0x40,0x40,0xC0,0x80,0x00,0x00,0x1C,0x3E,0x22,0x22,0x1F,0x3F,0x22,0x22,0x33,0x11,0x00," ,
-        "ç":"0x00,0x80,0xC0,0xE0,0x60,0x60,0x60,0x60,0xE0,0xC0,0x80,0x00,0x00,0x0F,0x1F,0xB8,0xB0,0xF0,0xF0,0x30,0x38,0x18,0x08,0x00," ,
-        "è":"0x00,0x80,0xC0,0xE0,0x62,0x66,0x6C,0x68,0x60,0xC0,0x80,0x00,0x00,0x0F,0x1F,0x33,0x33,0x33,0x33,0x33,0x33,0x13,0x03,0x00," ,
-        "é":"0x00,0x80,0xC0,0xE0,0x60,0x68,0x6C,0x66,0x62,0xC0,0x80,0x00,0x00,0x0F,0x1F,0x3B,0x33,0x33,0x33,0x33,0x33,0x13,0x03,0x00," ,
-        "ê":"0x00,0x80,0xC0,0xE8,0x6C,0x66,0x66,0x6C,0x68,0xC0,0x80,0x00,0x00,0x0F,0x1F,0x33,0x33,0x33,0x33,0x33,0x33,0x13,0x03,0x00," ,
-        "ë":"0x00,0x80,0xC0,0xEC,0x6C,0x60,0x60,0x6C,0x6C,0xC0,0x80,0x00,0x00,0x0F,0x1F,0x33,0x33,0x33,0x33,0x33,0x33,0x13,0x03,0x00," ,
-        "ì":"0x00,0x00,0x00,0x00,0x62,0xE6,0xEC,0x08,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x3F,0x3F,0x30,0x30,0x00,0x00,0x00," ,
-        "í":"0x00,0x00,0x00,0x00,0x68,0xEC,0xE6,0x02,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x3F,0x3F,0x30,0x30,0x00,0x00,0x00," ,
-        "î":"0x00,0x00,0x00,0x08,0x6C,0xE6,0xE6,0x0C,0x08,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x3F,0x3F,0x30,0x30,0x00,0x00,0x00," ,
-        "ï":"0x00,0x00,0x00,0x0C,0x6C,0xE0,0xEC,0x0C,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x3F,0x3F,0x30,0x30,0x00,0x00,0x00," ,
-        "ñ":"0x00,0x00,0xE0,0xE8,0x6C,0x64,0x6C,0x68,0xEC,0xC4,0x80,0x00,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x00," ,
-        "ò":"0x00,0x80,0xC0,0xE0,0x62,0x66,0x6C,0x68,0xE0,0xC0,0x80,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x38,0x1F,0x0F,0x00," ,
-        "ó":"0x00,0x80,0xC0,0xE0,0x68,0x6C,0x66,0x62,0xE0,0xC0,0x80,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x38,0x1F,0x0F,0x00," ,
-        "ô":"0x00,0x80,0xC0,0xE8,0x6C,0x66,0x66,0x6C,0xE8,0xC0,0x80,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x38,0x1F,0x0F,0x00," ,
-        "õ":"0x00,0x80,0xC8,0xEC,0x64,0x6C,0x68,0x6C,0xE4,0xC0,0x80,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x38,0x1F,0x0F,0x00," ,
-        "ö":"0x00,0x80,0xC0,0xEC,0x6C,0x60,0x60,0x6C,0xEC,0xC0,0x80,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x38,0x1F,0x0F,0x00," ,
-        "÷":"0x00,0x00,0x80,0x80,0x80,0xB0,0xB0,0x80,0x80,0x80,0x00,0x00,0x00,0x00,0x01,0x01,0x01,0x0D,0x0D,0x01,0x01,0x01,0x00,0x00," ,
-        "ø":"0x00,0x80,0xC0,0xE0,0x60,0x60,0x60,0xE0,0xC0,0xE0,0xA0,0x00,0x00,0x2F,0x3F,0x18,0x3C,0x36,0x33,0x31,0x38,0x1F,0x0F,0x00," ,
-        "ù":"0x00,0xE0,0xE0,0x00,0x02,0x06,0x0C,0x08,0x00,0xE0,0xE0,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x18,0x3F,0x3F,0x00," ,
-        "ú":"0x00,0xE0,0xE0,0x00,0x08,0x0C,0x06,0x02,0x00,0xE0,0xE0,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x18,0x3F,0x3F,0x00," ,
-        "û":"0x00,0xE0,0xE0,0x08,0x0C,0x06,0x06,0x0C,0x08,0xE0,0xE0,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x18,0x3F,0x3F,0x00," ,
-        "ü":"0x00,0xE0,0xE0,0x0C,0x0C,0x00,0x00,0x0C,0x0C,0xE0,0xE0,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x18,0x3F,0x3F,0x00," ,
-        "ý":"0x00,0x00,0x60,0xE0,0x80,0x10,0x18,0x8C,0xE4,0x60,0x00,0x00,0x00,0x00,0x00,0x81,0xE7,0x7E,0x1E,0x07,0x01,0x00,0x00,0x00," ,
-        "þ":"0x00,0x00,0x03,0xFF,0xFF,0x1B,0x18,0x18,0xF8,0xF0,0x00,0x00,0x00,0x00,0x30,0x3F,0x3F,0x36,0x06,0x06,0x07,0x03,0x00,0x00," ,
-        "ÿ":"0x00,0x00,0x60,0xEC,0x8C,0x00,0x00,0x8C,0xEC,0x60,0x00,0x00,0x00,0x00,0x00,0x81,0xE7,0x7E,0x1E,0x07,0x01,0x00,0x00,0x00," ,
-        "Ѐ":"0x00,0xFC,0xFC,0x8D,0x8F,0x8E,0x8C,0x8C,0x8C,0x0C,0x0C,0x00,0x00,0x3F,0x3F,0x31,0x31,0x31,0x31,0x31,0x31,0x30,0x30,0x00," ,
-        "Ё":"0x00,0xFE,0xFE,0xC7,0xC7,0xC6,0xC6,0xC7,0xC7,0x06,0x06,0x00,0x00,0x3F,0x3F,0x30,0x30,0x30,0x30,0x30,0x30,0x30,0x30,0x00," ,
-        "Ђ":"0x00,0x03,0xFF,0xFF,0x83,0xC3,0xC3,0xC3,0xC0,0x80,0x00,0x00,0x00,0x00,0x3F,0x3F,0x01,0x00,0x30,0x30,0x39,0x1F,0x0F,0x00," ,
-        "Ѓ":"0x00,0xFC,0xFC,0x0C,0x0C,0x0C,0x0E,0x0F,0x0D,0x0C,0x0C,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00," ,
-        "Є":"0x00,0xF8,0xFC,0xCE,0xC7,0xC3,0xC3,0xC3,0x07,0x0E,0x0C,0x00,0x00,0x07,0x0F,0x1C,0x38,0x30,0x30,0x30,0x38,0x1C,0x0C,0x00," ,
-        "Ѕ":"0x00,0x3C,0x7E,0x67,0xE3,0xC3,0xC3,0xC3,0x87,0x8E,0x0C,0x00,0x00,0x0C,0x1C,0x38,0x30,0x30,0x30,0x31,0x39,0x1F,0x0F,0x00," ,
-        "І":"0x00,0x00,0x00,0x03,0x03,0xFF,0xFF,0x03,0x03,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x3F,0x3F,0x30,0x30,0x00,0x00,0x00," ,
-        "Ї":"0x00,0x00,0x00,0x0D,0x0D,0xFC,0xFC,0x0D,0x0D,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x3F,0x3F,0x30,0x30,0x00,0x00,0x00," ,
-        "Ј":"0x00,0x00,0x00,0x00,0x00,0x00,0x03,0x03,0x03,0xFF,0xFF,0x00,0x00,0x0E,0x1E,0x38,0x30,0x30,0x30,0x30,0x38,0x1F,0x0F,0x00," ,
-        "Љ":"0x00,0x00,0xFE,0xFF,0x03,0x03,0xFF,0xFF,0xC0,0xC0,0x80,0x00,0x00,0x30,0x3F,0x1F,0x00,0x00,0x3F,0x3F,0x30,0x39,0x1F,0x0F," ,
-        "Њ":"0x00,0xFF,0xFF,0xC0,0xC0,0xC0,0xFF,0xFF,0xC0,0xC0,0x80,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0x3F,0x3F,0x30,0x39,0x1F,0x0F," ,
-        "Ћ":"0x00,0x03,0xFF,0xFF,0xC3,0xC3,0xC3,0xC3,0xC0,0x80,0x00,0x00,0x00,0x00,0x3F,0x3F,0x01,0x00,0x00,0x00,0x01,0x3F,0x3F,0x00," ,
-        "Ќ":"0x00,0xFF,0xFF,0xC0,0xE2,0xF3,0x39,0x1C,0x0E,0x07,0x03,0x00,0x00,0x3F,0x3F,0x00,0x01,0x03,0x07,0x0E,0x1C,0x38,0x30,0x00," ,
-        "Ѝ":"0x00,0xFF,0xFF,0x00,0x01,0xC3,0xF2,0x38,0x0E,0xFF,0xFF,0x00,0x00,0x3F,0x3F,0x1C,0x07,0x03,0x00,0x00,0x00,0x3F,0x3F,0x00," ,
-        "Ў":"0x00,0x07,0x1F,0x7C,0xF1,0xC1,0xC1,0xF1,0x7C,0x1F,0x07,0x00,0x00,0x00,0x30,0x30,0x3C,0x0F,0x07,0x01,0x00,0x00,0x00,0x00," ,
-        "Џ":"0x00,0xFF,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0xFF,0x00,0x00,0x1F,0x1F,0x18,0x18,0x78,0x78,0x18,0x18,0x1F,0x1F,0x00," ,
-        #"A":"0x00,0x80,0xE0,0x78,0x1E,0x07,0x07,0x1E,0x78,0xE0,0x80,0x00,0x00,0x3F,0x3F,0x06,0x06,0x06,0x06,0x06,0x06,0x3F,0x3F,0x00," ,
-        "Б":"0x00,0xFF,0xFF,0xC3,0xC3,0xC3,0xC3,0xC3,0xC3,0x83,0x00,0x00,0x00,0x3F,0x3F,0x30,0x30,0x30,0x30,0x30,0x39,0x1F,0x0F,0x00," ,
-        "В":"0x00,0xFF,0xFF,0xC3,0xC3,0xC3,0xC3,0xE7,0xFE,0xBC,0x00,0x00,0x00,0x3F,0x3F,0x30,0x30,0x30,0x30,0x30,0x39,0x1F,0x0F,0x00," ,
-        "Г":"0x00,0xFF,0xFF,0x03,0x03,0x03,0x03,0x03,0x03,0x03,0x03,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00," ,
-        "Г":"0x00,0xFF,0xFF,0x03,0x03,0x03,0x03,0x03,0x03,0x03,0x03,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00," ,
-        "Д":"0x00,0x00,0xF8,0xFE,0x0F,0x03,0x03,0x03,0xFF,0xFF,0x00,0x00,0x00,0x70,0x7F,0x1F,0x18,0x18,0x18,0x18,0x1F,0x7F,0x70,0x00," ,
-        "Е":"0x00,0xFF,0xFF,0xC3,0xC3,0xC3,0xC3,0xC3,0xC3,0x03,0x03,0x00,0x00,0x3F,0x3F,0x30,0x30,0x30,0x30,0x30,0x30,0x30,0x30,0x00," ,
-        "Ж":"0x00,0x03,0x0F,0xFC,0xE0,0xFF,0xFF,0xE0,0xFC,0x0F,0x03,0x00,0x00,0x38,0x3F,0x07,0x00,0x3F,0x3F,0x00,0x07,0x3F,0x38,0x00," ,
-        "Ж":"0x00,0x03,0x0F,0xFC,0xE0,0xFF,0xFF,0xE0,0xFC,0x0F,0x03,0x00,0x00,0x38,0x3F,0x07,0x00,0x3F,0x3F,0x00,0x07,0x3F,0x38,0x00," ,
-        "И":"0x00,0xFF,0xFF,0x00,0x00,0xC0,0xF0,0x38,0x0E,0xFF,0xFF,0x00,0x00,0x3F,0x3F,0x1C,0x07,0x03,0x00,0x00,0x00,0x3F,0x3F,0x00," ,
-        "Й":"0x00,0xFF,0xFF,0x00,0x02,0xC3,0xF1,0x38,0x0E,0xFF,0xFF,0x00,0x00,0x3F,0x3F,0x1C,0x07,0x03,0x00,0x00,0x00,0x3F,0x3F,0x00," ,
-        "К":"0x00,0xFF,0xFF,0xC0,0xE0,0xF0,0x38,0x1C,0x0E,0x07,0x03,0x00,0x00,0x3F,0x3F,0x00,0x01,0x03,0x07,0x0E,0x1C,0x38,0x30,0x00," ,
-        "Л":"0x00,0x00,0xF0,0xFC,0x1E,0x07,0x03,0x03,0x03,0xFF,0xFF,0x00,0x00,0x30,0x3F,0x1F,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x00," ,
-        "М":"0x00,0xFF,0xFF,0x1E,0x78,0xE0,0xE0,0x78,0x1E,0xFF,0xFF,0x00,0x00,0x3F,0x3F,0x00,0x00,0x01,0x01,0x00,0x00,0x3F,0x3F,0x00," ,
-        "Н":"0x00,0xFF,0xFF,0xC0,0xC0,0xC0,0xC0,0xC0,0xC0,0xFF,0xFF,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x00," ,
-        "О":"0x00,0xF0,0xFC,0x0E,0x07,0x03,0x03,0x07,0x0E,0xFC,0xF0,0x00,0x00,0x03,0x0F,0x1C,0x38,0x30,0x30,0x38,0x1C,0x0F,0x03,0x00," ,
-        "П":"0x00,0xFF,0xFF,0x03,0x03,0x03,0x03,0x03,0x03,0xFF,0xFF,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x00," ,
-        "Р":"0x00,0xFF,0xFF,0x83,0x83,0x83,0x83,0x83,0xC7,0xFE,0x7C,0x00,0x00,0x3F,0x3F,0x01,0x01,0x01,0x01,0x01,0x01,0x00,0x00,0x00," ,
-        "С":"0x00,0xF0,0xFC,0x0E,0x07,0x03,0x03,0x03,0x07,0x0E,0x0C,0x00,0x00,0x03,0x0F,0x1C,0x38,0x30,0x30,0x30,0x38,0x1C,0x0C,0x00," ,
-        "Т":"0x00,0x03,0x03,0x03,0x03,0xFF,0xFF,0x03,0x03,0x03,0x03,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0x00,0x00," ,
-        "У":"0x00,0x07,0x1F,0x7C,0xF0,0xC0,0xC0,0xF0,0x7C,0x1F,0x07,0x00,0x00,0x00,0x30,0x30,0x3C,0x0F,0x07,0x01,0x00,0x00,0x00,0x00," ,
-        "Ф":"0x00,0xF8,0xFC,0x0E,0x06,0xFF,0xFF,0x06,0x0E,0xFC,0xF8,0x00,0x00,0x03,0x07,0x0E,0x0C,0x3F,0x3F,0x0C,0x0E,0x07,0x03,0x00," ,
-        "Х":"0x00,0x03,0x0F,0x3C,0xF0,0xC0,0xC0,0xF0,0x3C,0x0F,0x03,0x00,0x00,0x30,0x3C,0x0F,0x03,0x00,0x00,0x03,0x0F,0x3C,0x30,0x00," ,
-        "Ц":"0x00,0xFF,0xFF,0x00,0x00,0x00,0x00,0x00,0xFF,0xFF,0x00,0x00,0x00,0x1F,0x1F,0x18,0x18,0x18,0x18,0x18,0x1F,0x7F,0x78,0x00," ,
-        "Ч":"0x00,0x7F,0xFF,0xC0,0xC0,0xC0,0xC0,0xC0,0xC0,0xFF,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x00," ,
-        "Ш":"0x00,0xFF,0xFF,0x00,0x00,0xFF,0xFF,0x00,0x00,0xFF,0xFF,0x00,0x00,0x3F,0x3F,0x30,0x30,0x3F,0x3F,0x30,0x30,0x3F,0x3F,0x00," ,
-        "Щ":"0x00,0xFF,0xFF,0x00,0x00,0xFF,0xFF,0x00,0x00,0xFF,0xFF,0x00,0x00,0x1F,0x1F,0x18,0x18,0x1F,0x1F,0x18,0x18,0x1F,0x7F,0x70," ,
-        "Ъ":"0x03,0x03,0xFF,0xFF,0xC0,0xC0,0xC0,0xC0,0xC0,0x80,0x00,0x00,0x00,0x00,0x3F,0x3F,0x30,0x30,0x30,0x30,0x39,0x1F,0x0F,0x00," ,
-        "Ы":"0x00,0xFF,0xFF,0xC0,0xC0,0xC0,0xC0,0x80,0x00,0x00,0xFF,0xFF,0x00,0x3F,0x3F,0x30,0x30,0x30,0x39,0x1F,0x0F,0x00,0x3F,0x3F," ,
-        "Ь":"0x00,0xFF,0xFF,0xC0,0xC0,0xC0,0xC0,0xC0,0xC0,0x80,0x00,0x00,0x00,0x3F,0x3F,0x30,0x30,0x30,0x30,0x30,0x39,0x1F,0x0F,0x00," ,
-        "Э":"0x00,0x0C,0x0E,0x07,0xC3,0xC3,0xC3,0xC7,0xCE,0xFC,0xF8,0x00,0x00,0x0C,0x1C,0x38,0x30,0x30,0x30,0x38,0x1C,0x0F,0x07,0x00," ,
-        "Ю":"0x00,0xFF,0xFF,0xC0,0xFC,0xFE,0x07,0x03,0x07,0xFE,0xFC,0x00,0x00,0x3F,0x3F,0x00,0x0F,0x1F,0x38,0x30,0x38,0x1F,0x0F,0x00," ,
-        "Я":"0x00,0x7C,0xFE,0xC7,0x83,0x83,0x83,0x83,0x83,0xFF,0xFF,0x00,0x00,0x30,0x38,0x1D,0x0F,0x07,0x03,0x01,0x01,0x3F,0x3F,0x00," ,
-        "а":"0x00,0x00,0x30,0x30,0x30,0x30,0x30,0x30,0x30,0xF0,0xE0,0x00,0x00,0x1E,0x3F,0x33,0x33,0x33,0x33,0x33,0x33,0x3F,0x3F,0x00," ,
-        "б":"0x00,0xE0,0xF0,0x30,0x30,0x30,0x30,0x30,0x30,0x30,0x00,0x00,0x00,0x1F,0x3F,0x33,0x33,0x33,0x33,0x33,0x33,0x3F,0x1E,0x00," ,
-        "в":"0x00,0xF0,0xF0,0x30,0x30,0x30,0x30,0x30,0xF0,0xE0,0x00,0x00,0x00,0x3F,0x3F,0x33,0x33,0x33,0x33,0x33,0x33,0x3F,0x1E,0x00," ,
-        "г":"0x00,0xF0,0xF0,0x30,0x30,0x30,0x30,0x30,0x30,0x30,0x30,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00," ,
-        "д":"0x00,0x00,0xC0,0xE0,0x70,0x30,0x30,0x30,0xF0,0xF0,0x00,0x00,0x00,0x60,0x7F,0x3F,0x30,0x30,0x30,0x30,0x3F,0x7F,0x60,0x00," ,
-        "е":"0x00,0xE0,0xF0,0x30,0x30,0x30,0x30,0x30,0x30,0xF0,0xE0,0x00,0x00,0x1F,0x3F,0x33,0x33,0x33,0x33,0x33,0x33,0x33,0x33,0x00," ,
-        "ж":"0x00,0x30,0xF0,0xC0,0x00,0xF0,0xF0,0x00,0xC0,0xF0,0x30,0x00,0x00,0x30,0x3C,0x0F,0x03,0x3F,0x3F,0x03,0x0F,0x3C,0x30,0x00," ,
-        "з":"0x00,0x60,0x70,0x30,0x30,0x30,0x30,0x30,0x30,0xF0,0xE0,0x00,0x00,0x18,0x38,0x30,0x33,0x33,0x33,0x33,0x33,0x3F,0x1D,0x00," ,
-        "З":"0x00,0x60,0x70,0x30,0x30,0x30,0x30,0x30,0x30,0xF0,0xE0,0x00,0x00,0x18,0x38,0x30,0x33,0x33,0x33,0x33,0x33,0x3F,0x1D,0x00," ,
-        "и":"0x00,0xF0,0xF0,0x00,0x00,0x00,0x80,0xC0,0xE0,0xF0,0xF0,0x00,0x00,0x3F,0x3F,0x1C,0x0E,0x07,0x03,0x01,0x00,0x3F,0x3F,0x00," ,
-        "й":"0x00,0xF0,0xF0,0x00,0x04,0x08,0x88,0xC4,0xE0,0xF0,0xF0,0x00,0x00,0x3F,0x3F,0x1C,0x0E,0x07,0x03,0x01,0x00,0x3F,0x3F,0x00," ,
-        "к":"0x00,0xF0,0xF0,0x80,0x80,0xC0,0xE0,0x70,0x30,0x10,0x00,0x00,0x00,0x3F,0x3F,0x03,0x03,0x07,0x0E,0x1C,0x38,0x30,0x20,0x00," ,
-        "л":"0x00,0x00,0xC0,0xE0,0x70,0x30,0x30,0x30,0x30,0xF0,0xF0,0x00,0x00,0x30,0x3F,0x1F,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x00," ,
-        "м":"0x00,0xF0,0xF0,0xE0,0xC0,0x80,0x80,0xC0,0xE0,0xF0,0xF0,0x00,0x00,0x3F,0x3F,0x00,0x01,0x03,0x03,0x01,0x00,0x3F,0x3F,0x00," ,
-        "н":"0x00,0xF0,0xF0,0x00,0x00,0x00,0x00,0x00,0x00,0xF0,0xF0,0x00,0x00,0x3F,0x3F,0x03,0x03,0x03,0x03,0x03,0x03,0x3F,0x3F,0x00," ,
-        "о":"0x00,0xC0,0xE0,0x70,0x30,0x30,0x30,0x30,0x70,0xE0,0xC0,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x38,0x1F,0x0F,0x00," ,
-        "п":"0x00,0xF0,0xF0,0x30,0x30,0x30,0x30,0x30,0x30,0xF0,0xF0,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x00," ,
-        "р":"0x00,0xF0,0xF0,0x30,0x30,0x30,0x30,0x30,0x70,0xE0,0xC0,0x00,0x00,0xFF,0xFF,0x0C,0x0C,0x0C,0x0C,0x0C,0x0E,0x07,0x03,0x00," ,
-        "с":"0x00,0xC0,0xE0,0x70,0x30,0x30,0x30,0x30,0x70,0x60,0x40,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x38,0x18,0x08,0x00," ,
-        "т":"0x00,0x30,0x30,0x30,0x30,0xF0,0xF0,0x30,0x30,0x30,0x30,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0x00,0x00," ,
-        "у":"0x00,0x30,0xF0,0xC0,0x00,0x00,0x00,0x00,0xC0,0xF0,0x30,0x00,0x00,0x60,0xE0,0xC3,0xE7,0x7C,0x3C,0x0F,0x03,0x00,0x00,0x00," ,
-        "ф":"0x00,0x80,0xC0,0x60,0x60,0xF0,0xF0,0x60,0x60,0xC0,0x80,0x00,0x00,0x0F,0x1F,0x30,0x30,0xFF,0xFF,0x30,0x30,0x1F,0x0F,0x00," ,
-        "х":"0x00,0x30,0x70,0xC0,0x80,0x00,0x00,0x80,0xC0,0x70,0x30,0x00,0x00,0x30,0x38,0x0C,0x07,0x03,0x03,0x07,0x0C,0x38,0x30,0x00," ,
-        "ц":"0x00,0xF0,0xF0,0x00,0x00,0x00,0x00,0x00,0xF0,0xF0,0x00,0x00,0x00,0x3F,0x3F,0x30,0x30,0x30,0x30,0x30,0x3F,0xFF,0xF0,0x00," ,
-        "ч":"0x00,0xF0,0xF0,0x00,0x00,0x00,0x00,0x00,0x00,0xF0,0xF0,0x00,0x00,0x01,0x03,0x03,0x03,0x03,0x03,0x03,0x03,0x3F,0x3F,0x00," ,
-        "ш":"0x00,0xF0,0xF0,0x00,0x00,0xE0,0xE0,0x00,0x00,0xF0,0xF0,0x00,0x00,0x3F,0x3F,0x30,0x30,0x3F,0x3F,0x30,0x30,0x3F,0x3F,0x00," ,
-        "щ":"0x00,0xF0,0xF0,0x00,0x00,0xF0,0xF0,0x00,0x00,0xF0,0xF0,0x00,0x00,0x3F,0x3F,0x30,0x30,0x3F,0x3F,0x30,0x30,0x3F,0xFF,0xE0," ,
-        "ъ":"0x30,0x30,0xF0,0xF0,0x80,0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x31,0x31,0x31,0x31,0x3B,0x1F,0x0E,0x00," ,
-        "ы":"0x00,0xF0,0xF0,0x80,0x80,0x80,0x00,0x00,0x00,0xF0,0xF0,0x00,0x00,0x3F,0x3F,0x31,0x31,0x3B,0x1F,0x0E,0x00,0x3F,0x3F,0x00," ,
-        "ь":"0x00,0xF0,0xF0,0x80,0x80,0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x00,0x3F,0x3F,0x31,0x31,0x31,0x31,0x31,0x3B,0x1F,0x0E,0x00," ,
-        "э":"0x00,0x40,0x60,0x70,0x30,0x30,0x30,0x30,0x70,0xE0,0xC0,0x00,0x00,0x08,0x18,0x38,0x30,0x33,0x33,0x33,0x3B,0x1F,0x0F,0x00," ,
-        "ю":"0x00,0xF0,0xF0,0x00,0xE0,0xF0,0x30,0x30,0x30,0xF0,0xE0,0x00,0x00,0x3F,0x3F,0x03,0x1F,0x3F,0x30,0x30,0x30,0x3F,0x1F,0x00," ,
-        "я":"0x00,0xC0,0xE0,0x70,0x30,0x30,0x30,0x30,0x30,0xF0,0xF0,0x00,0x00,0x21,0x33,0x3B,0x1E,0x0E,0x06,0x06,0x06,0x3F,0x3F,0x00," ,
-        "ѐ":"0x00,0xE0,0xF0,0x32,0x36,0x36,0x34,0x30,0x30,0xF0,0xE0,0x00,0x00,0x1F,0x3F,0x33,0x33,0x33,0x33,0x33,0x33,0x33,0x33,0x00," ,
-        "ё":"0x00,0xE0,0xF0,0x34,0x34,0x30,0x30,0x34,0x34,0xF0,0xE0,0x00,0x00,0x1F,0x3F,0x33,0x33,0x33,0x33,0x33,0x33,0x33,0x33,0x00," ,
-        "ђ":"0x00,0x30,0xFC,0xFC,0x30,0xB0,0xB0,0xB0,0x80,0x80,0x00,0x00,0x00,0x00,0x3F,0x3F,0x07,0x03,0x01,0x01,0xC1,0xFF,0x3F,0x00," ,
-        "ѓ":"0x00,0xF0,0xF0,0x30,0x30,0x34,0x36,0x32,0x30,0x30,0x30,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00," ,
-        "є":"0x00,0xC0,0xE0,0x70,0x30,0x30,0x30,0x30,0x70,0x60,0x40,0x00,0x00,0x0F,0x1F,0x3B,0x33,0x33,0x33,0x30,0x38,0x18,0x08,0x00," ,
-        "ѕ":"0x00,0xE0,0xF0,0xB0,0xB0,0x30,0x30,0x30,0x30,0x70,0x60,0x00,0x00,0x18,0x39,0x31,0x33,0x33,0x33,0x37,0x36,0x3E,0x1C,0x00," ,
-        "і":"0x00,0x00,0x00,0x00,0x30,0xF6,0xF6,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x3F,0x3F,0x30,0x30,0x00,0x00,0x00," ,
-        "ї":"0x00,0x00,0x00,0x04,0x34,0xF0,0xF4,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x3F,0x3F,0x30,0x30,0x00,0x00,0x00," ,
-        "ј":"0x00,0x00,0x00,0x00,0x00,0x30,0x30,0xF6,0xF6,0x00,0x00,0x00,0x00,0x00,0x00,0x60,0xE0,0xC0,0xC0,0xFF,0x7F,0x00,0x00,0x00," ,
-        "љ":"0x00,0x00,0xE0,0xF0,0x30,0x30,0xF0,0xF0,0x00,0x00,0x00,0x00,0x00,0x30,0x3F,0x1F,0x00,0x00,0x3F,0x3F,0x33,0x33,0x1E,0x0C," ,
-        "њ":"0x00,0xF0,0xF0,0x00,0x00,0x00,0xF0,0xF0,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x03,0x03,0x03,0x3F,0x3F,0x33,0x33,0x1E,0x0C," ,
-        "ћ":"0x00,0x30,0xFC,0xFC,0xB0,0xB0,0xB0,0xB0,0x80,0x80,0x00,0x00,0x00,0x00,0x3F,0x3F,0x01,0x01,0x01,0x01,0x01,0x3F,0x3F,0x00," ,
-        "ќ":"0x00,0xF0,0xF0,0x80,0x88,0xCC,0xE4,0x70,0x30,0x10,0x00,0x00,0x00,0x3F,0x3F,0x03,0x03,0x07,0x0E,0x1C,0x38,0x30,0x20,0x00," ,
-        "ѝ":"0x00,0xF0,0xF0,0x00,0x06,0x0C,0x88,0xC0,0xE0,0xF0,0xF0,0x00,0x00,0x3F,0x3F,0x1C,0x0E,0x07,0x03,0x01,0x00,0x3F,0x3F,0x00," ,
-        "ў":"0x00,0x30,0xF0,0xC0,0x04,0x08,0x08,0x04,0xC0,0xF0,0x30,0x00,0x00,0x60,0xE0,0xC3,0xE7,0x7C,0x3C,0x0F,0x03,0x00,0x00,0x00," ,
-        "џ":"0x00,0xF0,0xF0,0x00,0x00,0x00,0x00,0x00,0x00,0xF0,0xF0,0x00,0x00,0x3F,0x3F,0x30,0x30,0xF0,0xF0,0x30,0x30,0x3F,0x3F,0x00," ,
-        "Ā":"0x00,0x00,0x00,0xE0,0xF9,0x1D,0x1D,0xF9,0xE0,0x00,0x00,0x00,0x00,0x38,0x3F,0x07,0x06,0x06,0x06,0x06,0x07,0x3F,0x38,0x00," ,
-        "ā":"0x00,0x00,0x40,0x60,0x68,0x68,0x68,0x68,0x68,0xE0,0xC0,0x00,0x00,0x1C,0x3E,0x33,0x33,0x33,0x33,0x33,0x33,0x3F,0x3F,0x00," ,
-        "Ă":"0x00,0x00,0x00,0xE0,0xF9,0x1A,0x1A,0xF9,0xE0,0x00,0x00,0x00,0x00,0x38,0x3F,0x07,0x06,0x06,0x06,0x06,0x07,0x3F,0x38,0x00," ,
-        "ă":"0x00,0x00,0x40,0x60,0x64,0x68,0x68,0x68,0x64,0xE0,0xC0,0x00,0x00,0x1C,0x3E,0x33,0x33,0x33,0x33,0x33,0x33,0x3F,0x3F,0x00," ,
-        "Ą":"0x00,0x00,0x00,0xE0,0xFC,0x1F,0x1F,0xFC,0xE0,0x00,0x00,0x00,0x00,0x38,0x3F,0x07,0x06,0x06,0x06,0x06,0x67,0xBF,0xB8,0x00," ,
-        "ą":"0x00,0x00,0x40,0x60,0x60,0x60,0x60,0x60,0x60,0xE0,0xC0,0x00,0x00,0x1C,0x3E,0x33,0x33,0x33,0x33,0x33,0x73,0xBF,0xBF,0x00," ,
-        "Ć":"0x00,0x80,0xE0,0x70,0x38,0x18,0x1A,0x1B,0x39,0x70,0x60,0x00,0x00,0x03,0x0F,0x1C,0x38,0x30,0x30,0x30,0x38,0x1C,0x0C,0x00," ,
-        "ć":"0x00,0x80,0xC0,0xE0,0x60,0x60,0x68,0x6C,0x64,0xC0,0x80,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x30,0x18,0x08,0x00," ,
-        "Ĉ":"0x00,0x80,0xE0,0x70,0x3A,0x1B,0x19,0x1B,0x3A,0x70,0x60,0x00,0x00,0x03,0x0F,0x1C,0x38,0x30,0x30,0x30,0x38,0x1C,0x0C,0x00," ,
-        "ĉ":"0x00,0x80,0xC0,0xE0,0x68,0x6C,0x64,0x6C,0x68,0xC0,0x80,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x30,0x18,0x08,0x00," ,
-        "Ċ":"0x00,0x80,0xE0,0x70,0x38,0x18,0x1A,0x18,0x38,0x70,0x60,0x00,0x00,0x03,0x0F,0x1C,0x38,0x30,0x30,0x30,0x38,0x1C,0x0C,0x00," ,
-        "ċ":"0x00,0x80,0xC0,0xE0,0x60,0x60,0x68,0x60,0x60,0xC0,0x80,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x30,0x18,0x08,0x00," ,
-        "Č":"0x00,0x80,0xE0,0x70,0x39,0x1B,0x1A,0x1B,0x39,0x70,0x60,0x00,0x00,0x03,0x0F,0x1C,0x38,0x30,0x30,0x30,0x38,0x1C,0x0C,0x00," ,
-        "č":"0x00,0x80,0xC0,0xE0,0x64,0x6C,0x68,0x6C,0x64,0xC0,0x80,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x30,0x18,0x08,0x00," ,
-        "Ď":"0x00,0xF8,0xF8,0x19,0x1B,0x1A,0x1B,0x39,0x70,0xE0,0x80,0x00,0x00,0x3F,0x3F,0x30,0x30,0x30,0x30,0x38,0x1C,0x0F,0x03,0x00," ,
-        "ď":"0x00,0x80,0xC0,0xE0,0x60,0x60,0xE0,0xFF,0xFF,0x00,0x05,0x03,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x3F,0x3F,0x00,0x00,0x00," ,
-        "Đ":"0xC0,0xFF,0xFF,0xC3,0xC3,0x03,0x03,0x07,0x0E,0xFC,0xF0,0x00,0x00,0x3F,0x3F,0x30,0x30,0x30,0x30,0x38,0x1C,0x0F,0x03,0x00," ,
-        "đ":"0x00,0x80,0xC0,0xE0,0x60,0x60,0x60,0xE4,0xC4,0xFF,0xFF,0x04,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x30,0x3F,0x3F,0x00," ,
-        "Ē":"0x00,0xFC,0xFC,0x8C,0x8D,0x8D,0x8D,0x8D,0x8C,0x0C,0x0C,0x00,0x00,0x3F,0x3F,0x31,0x31,0x31,0x31,0x31,0x31,0x30,0x30,0x00," ,
-        "ē":"0x00,0x80,0xC0,0xE0,0x68,0x68,0x68,0x68,0x68,0xC0,0x80,0x00,0x00,0x0F,0x1F,0x3B,0x33,0x33,0x33,0x33,0x33,0x13,0x01,0x00," ,
-        "Ĕ":"0x00,0xF8,0xF8,0x98,0x99,0x9A,0x9A,0x99,0x98,0x18,0x18,0x00,0x00,0x3F,0x3F,0x31,0x31,0x31,0x31,0x31,0x31,0x30,0x30,0x00," ,
-        "ĕ":"0x00,0x80,0xC0,0xE0,0x64,0x68,0x68,0x68,0x64,0xC0,0x80,0x00,0x00,0x0F,0x1F,0x3B,0x33,0x33,0x33,0x33,0x33,0x13,0x01,0x00," ,
-        "Ė":"0x00,0xF8,0xF8,0x98,0x98,0x98,0x9A,0x98,0x98,0x18,0x18,0x00,0x00,0x3F,0x3F,0x31,0x31,0x31,0x31,0x31,0x31,0x30,0x30,0x00," ,
-        "ė":"0x00,0x80,0xC0,0xE0,0x60,0x60,0x68,0x60,0x60,0xC0,0x80,0x00,0x00,0x0F,0x1F,0x3B,0x33,0x33,0x33,0x33,0x33,0x13,0x01,0x00," ,
-        "Ę":"0x00,0xFF,0xFF,0xC3,0xC3,0xC3,0xC3,0xC3,0xC3,0x03,0x03,0x00,0x00,0x3F,0x3F,0x30,0x30,0x30,0x30,0x30,0x70,0xB0,0xB0,0x00," ,
-        "ę":"0x00,0x80,0xC0,0xE0,0x60,0x60,0x60,0x60,0x60,0xC0,0x80,0x00,0x00,0x0F,0x1F,0x3B,0x33,0x33,0x73,0xB3,0xB3,0x13,0x01,0x00," ,
-        "Ě":"0x00,0xF8,0xF8,0x98,0x99,0x9B,0x9A,0x9B,0x99,0x18,0x18,0x00,0x00,0x3F,0x3F,0x31,0x31,0x31,0x31,0x31,0x31,0x30,0x30,0x00," ,
-        "ě":"0x00,0x80,0xC0,0xE0,0x64,0x6C,0x68,0x6C,0x64,0xC0,0x80,0x00,0x00,0x0F,0x1F,0x3B,0x33,0x33,0x33,0x33,0x33,0x13,0x01,0x00," ,
-        "Ĝ":"0x00,0x80,0xE0,0x70,0x1A,0x1B,0x19,0x1B,0x1A,0x38,0x30,0x00,0x00,0x03,0x0F,0x1C,0x38,0x30,0x33,0x33,0x33,0x3F,0x3F,0x00," ,
-        "ĝ":"0x00,0x80,0xC0,0xE0,0x68,0x6C,0x64,0x6C,0x68,0xE0,0xE0,0x00,0x00,0x03,0xC7,0xCE,0xCC,0xCC,0xCC,0xCC,0xE6,0x7F,0x3F,0x00," ,
-        "Ğ":"0x00,0x80,0xE0,0x70,0x1A,0x19,0x19,0x19,0x1A,0x38,0x30,0x00,0x00,0x03,0x0F,0x1C,0x38,0x30,0x33,0x33,0x33,0x3F,0x3F,0x00," ,
-        "ğ":"0x00,0x80,0xC0,0xE0,0x68,0x64,0x64,0x64,0x68,0xE0,0xE0,0x00,0x00,0x03,0xC7,0xCE,0xCC,0xCC,0xCC,0xCC,0xE6,0x7F,0x3F,0x00," ,
-        "Ġ":"0x00,0x80,0xE0,0x70,0x18,0x18,0x1A,0x18,0x18,0x38,0x30,0x00,0x00,0x03,0x0F,0x1C,0x38,0x30,0x33,0x33,0x33,0x3F,0x3F,0x00," ,
-        "ġ":"0x00,0x80,0xC0,0xE0,0x60,0x60,0x68,0x60,0x60,0xE0,0xE0,0x00,0x00,0x03,0xC7,0xCE,0xCC,0xCC,0xCC,0xCC,0xE6,0x7F,0x3F,0x00," ,
-        "Ģ":"0x00,0xF0,0xFC,0x0E,0x07,0x03,0xC3,0xC3,0xC3,0xC7,0xC6,0x00,0x00,0x03,0x0F,0x1C,0x38,0x30,0xB0,0x70,0x30,0x3F,0x3F,0x00," ,
-        "ģ":"0x00,0x80,0xC0,0xE0,0x60,0x60,0x6C,0x6A,0x60,0xE0,0xE0,0x00,0x00,0x03,0xC7,0xCE,0xCC,0xCC,0xCC,0xCC,0xE6,0x7F,0x3F,0x00," ,
-        "Ĥ":"0x00,0xFC,0xFC,0x80,0x82,0x81,0x81,0x82,0x80,0xFC,0xFC,0x00,0x00,0x3F,0x3F,0x01,0x01,0x01,0x01,0x01,0x01,0x3F,0x3F,0x00," ,
-        "ĥ":"0x00,0xFE,0xFE,0xC0,0x62,0x63,0x61,0xE3,0xC2,0x80,0x00,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x00,0x00," ,
-        "Ħ":"0x02,0xFF,0xFF,0xC2,0xC2,0xC2,0xC2,0xC2,0xC2,0xFF,0xFF,0x02,0x00,0x3F,0x3F,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x00," ,
-        "ħ":"0x04,0xFF,0xFF,0xC4,0x64,0x60,0x60,0xE0,0xC0,0x80,0x00,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x00,0x00," ,
-        "Ĩ":"0x00,0x00,0x00,0x1A,0x19,0xFB,0xFB,0x1A,0x19,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x3F,0x3F,0x30,0x30,0x00,0x00,0x00," ,
-        "ĩ":"0x00,0x00,0x00,0x08,0x64,0xEC,0xE8,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x3F,0x3F,0x30,0x30,0x00,0x00,0x00," ,
-        "Ī":"0x00,0x00,0x00,0x0C,0x0D,0xFD,0xFD,0x0D,0x0C,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x3F,0x3F,0x30,0x30,0x00,0x00,0x00," ,
-        "ī":"0x00,0x00,0x00,0x08,0x68,0xE8,0xE8,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x3F,0x3F,0x30,0x30,0x00,0x00,0x00," ,
-        "Ĭ":"0x00,0x00,0x00,0x18,0x19,0xFA,0xFA,0x19,0x18,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x3F,0x3F,0x30,0x30,0x00,0x00,0x00," ,
-        "ĭ":"0x00,0x00,0x00,0x00,0x64,0xE8,0xE8,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x3F,0x3F,0x30,0x30,0x00,0x00,0x00," ,
-        "Į":"0x00,0x00,0x00,0x03,0x03,0xFF,0xFF,0x03,0x03,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x7F,0xBF,0xB0,0x30,0x00,0x00,0x00," ,
-        "į":"0x00,0x00,0x00,0x00,0x60,0xEC,0xEC,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x7F,0xBF,0xB0,0x30,0x00,0x00,0x00," ,
-        "İ":"0x00,0x00,0x00,0x18,0x18,0xF8,0xFA,0x18,0x18,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x3F,0x3F,0x30,0x30,0x00,0x00,0x00," ,
-        "ı":"0x00,0x00,0x00,0x00,0x60,0xE0,0xE0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x3F,0x3F,0x30,0x30,0x00,0x00,0x00," ,
-        "IJ":"0x00,0x03,0xFF,0xFF,0x03,0x00,0x00,0x00,0x03,0xFF,0xFF,0x00,0x00,0x30,0x3F,0x3F,0x30,0x0C,0x1C,0x30,0x30,0x3F,0x1F,0x00," ,
-        "ij":"0x00,0x00,0x20,0xEC,0xEC,0x00,0x00,0x20,0xEC,0xEC,0x00,0x00,0x00,0x00,0x30,0x3F,0x3F,0x70,0xC0,0xC0,0xFF,0x7F,0x00,0x00," ,
-        "Ĵ":"0x00,0x00,0x00,0x00,0x02,0x03,0x01,0x03,0x02,0xF8,0xF8,0x00,0x00,0x0E,0x1E,0x38,0x30,0x30,0x30,0x30,0x38,0x1F,0x07,0x00," ,
-        "ĵ":"0x00,0x00,0x00,0x00,0x00,0x08,0x6C,0xE4,0xEC,0x08,0x00,0x00,0x00,0x00,0x00,0x60,0xE0,0xC0,0xC0,0xFF,0x7F,0x00,0x00,0x00," ,
-        "Ķ":"0x00,0xFF,0xFF,0xC0,0xE0,0xF0,0x38,0x1C,0x0E,0x07,0x03,0x00,0x00,0x3F,0x3F,0x00,0x01,0xA3,0x67,0x0E,0x1C,0x38,0x30,0x00," ,
-        "ķ":"0x00,0x00,0xFF,0xFF,0x00,0x80,0xC0,0xE0,0x60,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x03,0xA7,0x6F,0x1C,0x38,0x30,0x00,0x00," ,
-        "ĸ":"0x00,0x00,0xE0,0xE0,0x00,0x80,0xC0,0xE0,0x60,0x20,0x00,0x00,0x00,0x00,0x3F,0x3F,0x03,0x07,0x0F,0x1C,0x38,0x30,0x00,0x00," ,
-        "Ĺ":"0x00,0xF8,0xFA,0x03,0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x30,0x30,0x30,0x30,0x30,0x30,0x30,0x30,0x00," ,
-        "ĺ":"0x00,0x00,0x00,0x00,0x18,0xFA,0xFB,0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x3F,0x3F,0x30,0x30,0x00,0x00,0x00," ,
-        "Ļ":"0x00,0xFF,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x30,0x30,0xB0,0x70,0x30,0x30,0x30,0x30,0x00," ,
-        "ļ":"0x00,0x00,0x00,0x00,0x03,0xFF,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0xBF,0x7F,0x30,0x30,0x00,0x00,0x00," ,
-        "Ľ":"0x00,0xFF,0xFF,0x00,0x00,0x05,0x03,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x30,0x30,0x30,0x30,0x30,0x30,0x30,0x30,0x00," ,
-        "ľ":"0x00,0x00,0x00,0x00,0x03,0xFF,0xFF,0x00,0x05,0x03,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x3F,0x3F,0x30,0x30,0x00,0x00,0x00," ,
-        "Ŀ":"0x00,0xFF,0xFF,0x00,0x00,0x00,0x20,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x30,0x30,0x30,0x30,0x30,0x30,0x30,0x30,0x00," ,
-        "ŀ":"0x00,0x00,0x00,0x00,0x03,0xFF,0xFF,0x00,0x40,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x3F,0x3F,0x30,0x30,0x00,0x00,0x00," ,
-        "Ł":"0x80,0xFF,0xFF,0x20,0x10,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x30,0x30,0x30,0x30,0x30,0x30,0x30,0x30,0x00," ,
-        "ł":"0x00,0x00,0x00,0x00,0x83,0xFF,0xFF,0x20,0x10,0x00,0x00,0x00,0x00,0x00,0x00,0x31,0x30,0x3F,0x3F,0x30,0x30,0x00,0x00,0x00," ,
-        "Ń":"0x00,0xFF,0xFF,0x0E,0x38,0xF2,0xC3,0x01,0x00,0xFF,0xFF,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0x03,0x07,0x1C,0x3F,0x3F,0x00," ,
-        "ń":"0x00,0x00,0xE0,0xE0,0x60,0x68,0x6C,0x64,0xE0,0xC0,0x80,0x00,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x00," ,
-        "Ņ":"0x00,0xFF,0xFF,0x0E,0x38,0xF0,0xC0,0x00,0x00,0xFF,0xFF,0x00,0x00,0x3F,0x3F,0x00,0x00,0xA0,0x63,0x07,0x1C,0x3F,0x3F,0x00," ,
-        "ņ":"0x00,0x00,0xE0,0xE0,0x60,0x60,0x60,0x60,0xE0,0xC0,0x80,0x00,0x00,0x00,0x3F,0x3F,0x00,0x00,0xA0,0x60,0x00,0x3F,0x3F,0x00," ,
-        "Ň":"0x00,0xFF,0xFF,0x0E,0x38,0xF1,0xC2,0x01,0x00,0xFF,0xFF,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0x03,0x07,0x1C,0x3F,0x3F,0x00," ,
-        "ň":"0x00,0x00,0xE0,0xE0,0x64,0x6C,0x68,0x6C,0xE4,0xC0,0x80,0x00,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x00," ,
-        "ʼn":"0x00,0x0A,0xE6,0xE0,0x60,0x60,0x60,0x60,0xE0,0xC0,0x80,0x00,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x00," ,
-        "Ŋ":"0x00,0x00,0xFF,0xFF,0x06,0x03,0x03,0x03,0x07,0xFE,0xFC,0x00,0x00,0x00,0x3F,0x3F,0x00,0x00,0x20,0x20,0x30,0x1F,0x0F,0x00," ,
-        "ŋ":"0x00,0x00,0xE0,0xE0,0x60,0x60,0x60,0x60,0xE0,0xC0,0x80,0x00,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0xC0,0xC0,0xFF,0x7F,0x00," ,
-        "Ō":"0x00,0xC0,0xF0,0x38,0x1D,0x0D,0x0D,0x1D,0x38,0xF0,0xC0,0x00,0x00,0x03,0x0F,0x1C,0x38,0x30,0x30,0x38,0x1C,0x0F,0x03,0x00," ,
-        "ō":"0x00,0x80,0xC0,0xE0,0x68,0x68,0x68,0x68,0xE0,0xC0,0x80,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x38,0x1F,0x0F,0x00," ,
-        "Ŏ":"0x00,0x80,0xE0,0x70,0x39,0x1A,0x1A,0x39,0x70,0xE0,0x80,0x00,0x00,0x03,0x0F,0x1C,0x38,0x30,0x30,0x38,0x1C,0x0F,0x03,0x00," ,
-        "ŏ":"0x00,0x80,0xC0,0xE0,0x64,0x68,0x68,0x64,0xE0,0xC0,0x80,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x38,0x1F,0x0F,0x00," ,
-        "Ő":"0x00,0x80,0xE0,0x70,0x3A,0x19,0x1A,0x39,0x70,0xE0,0x80,0x00,0x00,0x03,0x0F,0x1C,0x38,0x30,0x30,0x38,0x1C,0x0F,0x03,0x00," ,
-        "ő":"0x00,0x80,0xC0,0xE0,0x68,0x64,0x68,0x64,0xE0,0xC0,0x80,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x38,0x1F,0x0F,0x00," ,
-        "Œ":"0xF0,0xFC,0x0E,0x03,0x03,0x07,0xFE,0xFF,0xC3,0xC3,0xC3,0x00,0x03,0x0F,0x1C,0x30,0x30,0x38,0x1F,0x3F,0x30,0x30,0x30,0x00," ,
-        "œ":"0x80,0xC0,0xE0,0x60,0x60,0xE0,0xC0,0x60,0x60,0x60,0x40,0x80,0x0F,0x1F,0x38,0x30,0x30,0x1F,0x1F,0x3B,0x33,0x33,0x1B,0x09," ,
-        "Ŕ":"0x00,0xF8,0xF8,0x98,0x98,0x9A,0x9B,0x99,0xF8,0xF0,0x60,0x00,0x00,0x3F,0x3F,0x01,0x01,0x03,0x07,0x0F,0x1D,0x38,0x30,0x00," ,
-        "ŕ":"0x00,0x00,0xE0,0xE0,0xC0,0x60,0x68,0x6C,0x64,0xE0,0xC0,0x00,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00," ,
-        "Ŗ":"0x00,0xFF,0xFF,0x83,0x83,0x83,0x83,0x83,0xC7,0xFE,0x7C,0x00,0x00,0x3F,0x3F,0x01,0x01,0xA3,0x67,0x0F,0x1D,0x38,0x30,0x00," ,
-        "ŗ":"0x00,0x00,0xE0,0xE0,0xC0,0x60,0x60,0x60,0x60,0xE0,0xC0,0x00,0x00,0x00,0x3F,0x3F,0x00,0xA0,0x60,0x00,0x00,0x00,0x00,0x00," ,
-        "Ř":"0x00,0xF8,0xF8,0x99,0x9B,0x9A,0x9B,0x99,0xF8,0xF0,0x60,0x00,0x00,0x3F,0x3F,0x01,0x01,0x03,0x07,0x0F,0x1D,0x38,0x30,0x00," ,
-        "ř":"0x00,0x00,0xE0,0xE0,0xC4,0x6C,0x68,0x6C,0x64,0xE0,0xC0,0x00,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00," ,
-        "Ś":"0x00,0x60,0xF0,0xF8,0x98,0x9A,0x9B,0x99,0x98,0x30,0x20,0x00,0x00,0x0C,0x1C,0x39,0x31,0x31,0x31,0x31,0x3B,0x1F,0x0E,0x00," ,
-        "ś":"0x00,0xC0,0xE0,0x60,0x68,0x6C,0x64,0x60,0x40,0x00,0x00,0x00,0x00,0x11,0x33,0x33,0x33,0x33,0x33,0x3F,0x1E,0x00,0x00,0x00," ,
-        "Ŝ":"0x00,0x60,0xF0,0xF8,0x9A,0x9B,0x99,0x9B,0x9A,0x30,0x20,0x00,0x00,0x0C,0x1C,0x39,0x31,0x31,0x31,0x31,0x3B,0x1F,0x0E,0x00," ,
-        "ŝ":"0x00,0xC0,0xE0,0x68,0x6C,0x64,0x6C,0x68,0x40,0x00,0x00,0x00,0x00,0x11,0x33,0x33,0x33,0x33,0x33,0x3F,0x1E,0x00,0x00,0x00," ,
-        "Ş":"0x00,0x3C,0x7E,0xE7,0xC3,0xC3,0xC3,0xC3,0xC7,0x8E,0x0C,0x00,0x00,0x0C,0x1C,0x38,0x30,0xB0,0xF0,0x30,0x39,0x1F,0x0F,0x00," ,
-        "ş":"0x00,0xC0,0xE0,0x60,0x60,0x60,0x60,0x60,0x40,0x00,0x00,0x00,0x00,0x11,0x33,0x33,0xB3,0xF3,0x33,0x3F,0x1E,0x00,0x00,0x00," ,
-        "Š":"0x00,0x60,0xF0,0xF8,0x99,0x9B,0x9A,0x9B,0x99,0x30,0x20,0x00,0x00,0x0C,0x1C,0x39,0x31,0x31,0x31,0x31,0x3B,0x1F,0x0E,0x00," ,
-        "š":"0x00,0xC0,0xE0,0x64,0x6C,0x68,0x6C,0x64,0x40,0x00,0x00,0x00,0x00,0x11,0x33,0x33,0x33,0x33,0x33,0x3F,0x1E,0x00,0x00,0x00," ,
-        "Ţ":"0x00,0x00,0x03,0x03,0x03,0xFF,0xFF,0x03,0x03,0x03,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xBF,0xBF,0x60,0x00,0x00,0x00,0x00," ,
-        "ţ":"0x00,0x60,0x60,0xFE,0xFE,0x60,0x60,0x60,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x1F,0x3F,0xB0,0xB0,0xF0,0x30,0x00,0x00,0x00," ,
-        "Ť":"0x00,0x00,0x18,0x19,0x1B,0xFA,0xFA,0x1B,0x19,0x18,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0x00,0x00," ,
-        "ť":"0x00,0x60,0x60,0xFE,0xFE,0x60,0x65,0x63,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x1F,0x3F,0x30,0x30,0x30,0x30,0x00,0x00,0x00," ,
-        "Ŧ":"0x00,0x00,0x03,0xC3,0xC3,0xFF,0xFF,0xC3,0xC3,0x03,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0x00,0x00," ,
-        "ŧ":"0x00,0x30,0x30,0xFE,0xFE,0x30,0x30,0x30,0x00,0x00,0x00,0x00,0x00,0x03,0x03,0x1F,0x3F,0x33,0x33,0x30,0x30,0x00,0x00,0x00," ,
-        "Ũ":"0x00,0xF8,0xF8,0x02,0x01,0x03,0x03,0x02,0x01,0xF8,0xF8,0x00,0x00,0x07,0x1F,0x38,0x30,0x30,0x30,0x30,0x38,0x1F,0x07,0x00," ,
-        "ũ":"0x00,0xE0,0xE0,0x08,0x04,0x0C,0x0C,0x08,0x04,0xE0,0xE0,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x18,0x3F,0x3F,0x00," ,
-        "Ū":"0x00,0xFC,0xFC,0x00,0x01,0x01,0x01,0x01,0x00,0xFC,0xFC,0x00,0x00,0x07,0x1F,0x38,0x30,0x30,0x30,0x30,0x38,0x1F,0x07,0x00," ,
-        "ū":"0x00,0xE0,0xE0,0x00,0x08,0x08,0x08,0x08,0x00,0xE0,0xE0,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x18,0x3F,0x3F,0x00," ,
-        "Ŭ":"0x00,0xFC,0xFC,0x00,0x01,0x02,0x02,0x01,0x00,0xFC,0xFC,0x00,0x00,0x07,0x1F,0x38,0x30,0x30,0x30,0x30,0x38,0x1F,0x07,0x00," ,
-        "ŭ":"0x00,0xE0,0xE0,0x00,0x04,0x08,0x08,0x04,0x00,0xE0,0xE0,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x18,0x3F,0x3F,0x00," ,
-        "Ů":"0x00,0xF8,0xF8,0x00,0x06,0x09,0x09,0x06,0x00,0xF8,0xF8,0x00,0x00,0x07,0x1F,0x38,0x30,0x30,0x30,0x30,0x38,0x1F,0x07,0x00," ,
-        "ů":"0x00,0xE0,0xE0,0x00,0x0C,0x12,0x12,0x0C,0x00,0xE0,0xE0,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x18,0x3F,0x3F,0x00," ,
-        "Ű":"0x00,0xF8,0xF8,0x00,0x02,0x01,0x02,0x01,0x00,0xF8,0xF8,0x00,0x00,0x07,0x1F,0x38,0x30,0x30,0x30,0x30,0x38,0x1F,0x07,0x00," ,
-        "ű":"0x00,0xE0,0xE0,0x00,0x08,0x04,0x08,0x04,0x00,0xE0,0xE0,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x18,0x3F,0x3F,0x00," ,
-        "Ų":"0x00,0xFF,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0xFF,0x00,0x00,0x07,0x1F,0x38,0x30,0xF0,0xB0,0xB0,0x38,0x1F,0x07,0x00," ,
-        "ų":"0x00,0xE0,0xE0,0x00,0x00,0x00,0x00,0x00,0x00,0xE0,0xE0,0x00,0x00,0x0F,0x1F,0x38,0x30,0xF0,0xB0,0xB0,0x18,0x3F,0x3F,0x00," ,
-        "Ŵ":"0x00,0xFC,0xFC,0x00,0x02,0x81,0x81,0x02,0x00,0xFC,0xFC,0x00,0x00,0x3F,0x3F,0x1C,0x06,0x03,0x03,0x06,0x1C,0x3F,0x3F,0x00," ,
-        "ŵ":"0x00,0xE0,0xE0,0x00,0x04,0xE8,0xE8,0x04,0x00,0xE0,0xE0,0x00,0x00,0x07,0x1F,0x38,0x1C,0x0F,0x0F,0x1C,0x38,0x1F,0x07,0x00," ,
-        "Ŷ":"0x00,0x02,0x0E,0x3C,0xF2,0xC1,0xC1,0xF2,0x3C,0x0E,0x02,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0x00,0x00," ,
-        "ŷ":"0x00,0x00,0x60,0xE0,0x88,0x04,0x04,0x88,0xE0,0x60,0x00,0x00,0x00,0x00,0x00,0x81,0xE7,0x7E,0x1E,0x07,0x01,0x00,0x00,0x00," ,
-        "Ÿ":"0x00,0x02,0x0E,0x3C,0xF1,0xC0,0xC0,0xF1,0x3C,0x0E,0x02,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0x00,0x00," ,
-        "Ź":"0x00,0x18,0x18,0x18,0x18,0x1A,0x9B,0xD9,0xF8,0x78,0x38,0x00,0x00,0x30,0x38,0x3C,0x3E,0x37,0x33,0x31,0x30,0x30,0x30,0x00," ,
-        "ź":"0x00,0x60,0x60,0x60,0x68,0x6C,0xE4,0xE0,0x60,0x20,0x00,0x00,0x00,0x30,0x38,0x3C,0x36,0x33,0x31,0x30,0x30,0x30,0x00,0x00," ,
-        "Ż":"0x00,0x18,0x18,0x18,0x18,0x18,0x9A,0xD8,0xF8,0x78,0x38,0x00,0x00,0x30,0x38,0x3C,0x3E,0x37,0x33,0x31,0x30,0x30,0x30,0x00," ,
-        "ż":"0x00,0x60,0x60,0x60,0x60,0x68,0xE0,0xE0,0x60,0x20,0x00,0x00,0x00,0x30,0x38,0x3C,0x36,0x33,0x31,0x30,0x30,0x30,0x00,0x00," ,
-        "Ž":"0x00,0x18,0x18,0x18,0x19,0x1B,0x9A,0xDB,0xF9,0x78,0x38,0x00,0x00,0x30,0x38,0x3C,0x3E,0x37,0x33,0x31,0x30,0x30,0x30,0x00," ,
-        "ž":"0x00,0x60,0x60,0x64,0x6C,0x68,0xEC,0xE4,0x60,0x20,0x00,0x00,0x00,0x30,0x38,0x3C,0x36,0x33,0x31,0x30,0x30,0x30,0x00,0x00," ,
-        "ſ":"0x00,0x00,0x00,0x00,0xFC,0xFE,0x06,0x06,0x0E,0x0C,0x00,0x00,0x00,0x00,0x30,0x30,0x3F,0x3F,0x30,0x00,0x00,0x00,0x00,0x00," ,
-    }
-    return font
-
-def getSmallFontMap():
-	font = {
-		" ":"0x00, 0x00, 0x00, 0x00, 0x00, 0x00,",
-		"!":"0x00, 0x00, 0x4f, 0x00, 0x00, 0x00,",
-		"\"":"0x00, 0x07, 0x00, 0x07, 0x00, 0x00,",
-		"#":"0x14, 0x7f, 0x14, 0x7f, 0x14, 0x00,",
-		"$":"0x24, 0x2a, 0x7f, 0x2a, 0x12, 0x00,",
-		"%":"0x23, 0x13, 0x08, 0x64, 0x62, 0x00,",
-		"&":"0x36, 0x49, 0x56, 0x20, 0x58, 0x00,",
-		"'":"0x00, 0x05, 0x03, 0x00, 0x00, 0x00,",
-		"(":"0x00, 0x1c, 0x22, 0x41, 0x00, 0x00,",
-		")":"0x00, 0x41, 0x22, 0x1c, 0x00, 0x00,",
-		"*":"0x14, 0x08, 0x3e, 0x08, 0x14, 0x00,",
-		"+":"0x08, 0x08, 0x3e, 0x08, 0x08, 0x00,",
-		",":"0x00, 0x50, 0x30, 0x00, 0x00, 0x00,",
-		"-":"0x08, 0x08, 0x08, 0x08, 0x08, 0x00,",
-		".":"0x00, 0x60, 0x60, 0x00, 0x00, 0x00,",
-		"/":"0x20, 0x10, 0x08, 0x04, 0x02, 0x00,",
-		"0":"0x3e, 0x51, 0x49, 0x45, 0x3e, 0x00,",
-		"1":"0x00, 0x42, 0x7f, 0x40, 0x00, 0x00,",
-		"2":"0x42, 0x61, 0x51, 0x49, 0x46, 0x00,",
-		"3":"0x21, 0x41, 0x45, 0x4b, 0x31, 0x00,",
-		"4":"0x18, 0x14, 0x12, 0x7f, 0x10, 0x00,",
-		"5":"0x27, 0x45, 0x45, 0x45, 0x39, 0x00,",
-		"6":"0x3c, 0x4a, 0x49, 0x49, 0x30, 0x00,",
-		"7":"0x01, 0x71, 0x09, 0x05, 0x03, 0x00,",
-		"8":"0x36, 0x49, 0x49, 0x49, 0x36, 0x00,",
-		"9":"0x06, 0x49, 0x49, 0x29, 0x1e, 0x00,",
-		":":"0x00, 0x36, 0x36, 0x00, 0x00, 0x00,",
-		";":"0x00, 0x56, 0x36, 0x00, 0x00, 0x00,",
-		"<":"0x08, 0x14, 0x22, 0x41, 0x00, 0x00,",
-		"=":"0x14, 0x14, 0x14, 0x14, 0x14, 0x00,",
-		">":"0x00, 0x41, 0x22, 0x14, 0x08, 0x00,",
-		"?":"0x02, 0x01, 0x51, 0x09, 0x06, 0x00,",
-		"@":"0x32, 0x49, 0x79, 0x41, 0x3e, 0x00,",
-		"A":"0x7e, 0x09, 0x09, 0x09, 0x7e, 0x00,",
-		"B":"0x7f, 0x49, 0x49, 0x49, 0x36, 0x00,",
-		"C":"0x3e, 0x41, 0x41, 0x41, 0x22, 0x00,",
-		"D":"0x7f, 0x41, 0x41, 0x22, 0x1c, 0x00,",
-		"E":"0x7f, 0x49, 0x49, 0x49, 0x41, 0x00,",
-		"F":"0x7f, 0x09, 0x09, 0x09, 0x01, 0x00,",
-		"G":"0x3e, 0x41, 0x41, 0x49, 0x7a, 0x00,",
-		"H":"0x7f, 0x08, 0x08, 0x08, 0x7f, 0x00,",
-		"I":"0x00, 0x41, 0x7f, 0x41, 0x00, 0x00,",
-		"J":"0x20, 0x40, 0x41, 0x3f, 0x01, 0x00,",
-		"K":"0x7f, 0x08, 0x14, 0x22, 0x41, 0x00,",
-		"L":"0x7f, 0x40, 0x40, 0x40, 0x40, 0x00,",
-		"M":"0x7f, 0x02, 0x0c, 0x02, 0x7f, 0x00,",
-		"N":"0x7f, 0x04, 0x08, 0x10, 0x7f, 0x00,",
-		"O":"0x3e, 0x41, 0x41, 0x41, 0x3e, 0x00,",
-		"P":"0x7f, 0x09, 0x09, 0x09, 0x06, 0x00,",
-		"Q":"0x3e, 0x41, 0x51, 0x21, 0x5e, 0x00,",
-		"R":"0x7f, 0x09, 0x19, 0x29, 0x46, 0x00,",
-		"S":"0x26, 0x49, 0x49, 0x49, 0x32, 0x00,",
-		"T":"0x01, 0x01, 0x7f, 0x01, 0x01, 0x00,",
-		"U":"0x3f, 0x40, 0x40, 0x40, 0x3f, 0x00,",
-		"V":"0x1f, 0x20, 0x40, 0x20, 0x1f, 0x00,",
-		"W":"0x3f, 0x40, 0x38, 0x40, 0x3f, 0x00,",
-		"X":"0x63, 0x14, 0x08, 0x14, 0x63, 0x00,",
-		"Y":"0x07, 0x08, 0x70, 0x08, 0x07, 0x00,",
-		"Z":"0x61, 0x51, 0x49, 0x45, 0x43, 0x00,",
-		"[":"0x00, 0x7f, 0x41, 0x41, 0x00, 0x00,",
-		"\\":"0x02, 0x04, 0x08, 0x10, 0x20, 0x00,",
-		"]":"0x00, 0x41, 0x41, 0x7f, 0x00, 0x00,",
-		"^":"0x04, 0x02, 0x01, 0x02, 0x04, 0x00,",
-		"_":"0x40, 0x40, 0x40, 0x40, 0x40, 0x00,",
-		"`":"0x00, 0x03, 0x05, 0x00, 0x00, 0x00,",
-		"a":"0x20, 0x54, 0x54, 0x54, 0x78, 0x00,",
-		"b":"0x7f, 0x48, 0x44, 0x44, 0x38, 0x00,",
-		"c":"0x38, 0x44, 0x44, 0x44, 0x20, 0x00,",
-		"d":"0x38, 0x44, 0x44, 0x48, 0x7f, 0x00,",
-		"e":"0x38, 0x54, 0x54, 0x54, 0x18, 0x00,",
-		"f":"0x00, 0x04, 0x7e, 0x05, 0x01, 0x00,",
-		"g":"0x08, 0x54, 0x54, 0x54, 0x3c, 0x00,",
-		"h":"0x7f, 0x08, 0x04, 0x04, 0x78, 0x00,",
-		"i":"0x00, 0x44, 0x7d, 0x40, 0x00, 0x00,",
-		"j":"0x20, 0x40, 0x44, 0x3d, 0x00, 0x00,",
-		"k":"0x00, 0x7f, 0x10, 0x28, 0x44, 0x00,",
-		"l":"0x00, 0x41, 0x7f, 0x40, 0x00, 0x00,",
-		"m":"0x7c, 0x04, 0x78, 0x04, 0x78, 0x00,",
-		"n":"0x7c, 0x08, 0x04, 0x04, 0x78, 0x00,",
-		"o":"0x38, 0x44, 0x44, 0x44, 0x38, 0x00,",
-		"p":"0x7c, 0x14, 0x14, 0x14, 0x08, 0x00,",
-		"q":"0x08, 0x14, 0x14, 0x14, 0x7c, 0x00,",
-		"r":"0x7c, 0x08, 0x04, 0x04, 0x08, 0x00,",
-		"s":"0x48, 0x54, 0x54, 0x54, 0x24, 0x00,",
-		"t":"0x04, 0x3e, 0x44, 0x40, 0x20, 0x00,",
-		"u":"0x3c, 0x40, 0x40, 0x20, 0x7c, 0x00,",
-		"v":"0x0c, 0x30, 0x40, 0x30, 0x0c, 0x00,",
-		"w":"0x3c, 0x40, 0x30, 0x40, 0x3c, 0x00,",
-		"x":"0x44, 0x24, 0x38, 0x48, 0x44, 0x00,",
-		"y":"0x44, 0x48, 0x30, 0x10, 0x0c, 0x00,",
-		"z":"0x44, 0x64, 0x54, 0x4c, 0x44, 0x00,",
-		"{":"0x08, 0x36, 0x41, 0x00, 0x00, 0x00,",
-		"|":"0x00, 0x00, 0x77, 0x00, 0x00, 0x00,",
-		"}":"0x00, 0x00, 0x41, 0x36, 0x08, 0x00,",
-		"~":"0x02, 0x01, 0x02, 0x04, 0x02, 0x00,",
-		"^":"0x04, 0x02, 0x01, 0x02, 0x04, 0x00,",
-		" ":"0x00, 0x00, 0x00, 0x00, 0x00, 0x00,",
-		"¡":"0x00, 0x00, 0x79, 0x00, 0x00, 0x00,",
-		"¢":"0x1c, 0x22, 0x7f, 0x22, 0x10, 0x00,",
-		"£":"0x50, 0x7e, 0x51, 0x41, 0x42, 0x00,",
-		"¤":"0x22, 0x1c, 0x14, 0x1c, 0x22, 0x00,",
-		"¥":"0x15, 0x16, 0x7c, 0x16, 0x15, 0x00,",
-		"¦":"0x00, 0x00, 0x77, 0x00, 0x00, 0x00,",
-		"§":"0x4a, 0x55, 0x55, 0x55, 0x29, 0x00,",
-		"¨":"0x00, 0x01, 0x00, 0x01, 0x00, 0x00,",
-		"©":"0x00, 0x18, 0x24, 0x24, 0x00, 0x00,",
-		"ª":"0x00, 0x00, 0x00, 0x00, 0x00, 0x00,",
-		"«":"0x08, 0x14, 0x00, 0x08, 0x14, 0x00,",
-		"¬":"0x08, 0x08, 0x08, 0x08, 0x38, 0x00,",
-		"­":"0x08, 0x08, 0x08, 0x08, 0x08, 0x00,",
-		"®":"0x00, 0x00, 0x00, 0x00, 0x00, 0x00,",
-		"¯":"0x00, 0x01, 0x01, 0x01, 0x00, 0x00,",
-		"°":"0x00, 0x00, 0x07, 0x05, 0x07, 0x00,",
-		"±":"0x44, 0x44, 0x5f, 0x44, 0x44, 0x00,",
-		"²":"0x1d, 0x15, 0x17, 0x00, 0x00, 0x00,",
-		"³":"0x15, 0x15, 0x1f, 0x00, 0x00, 0x00,",
-		"´":"0x00, 0x04, 0x02, 0x01, 0x00, 0x00,",
-		"µ":"0x7c, 0x10, 0x10, 0x0c, 0x10, 0x00,",
-		"¶":"0x02, 0x07, 0x7f, 0x01, 0x7f, 0x00,",
-		"·":"0x00, 0x00, 0x08, 0x00, 0x00, 0x00,",
-		"¸":"0x00, 0x40, 0x60, 0x00, 0x00, 0x00,",
-		"¹":"0x12, 0x1f, 0x10, 0x00, 0x00, 0x00,",
-		"º":"0x07, 0x05, 0x07, 0x00, 0x00, 0x00,",
-		"»":"0x14, 0x08, 0x00, 0x14, 0x08, 0x00,",
-		"¼":"0x21, 0x17, 0x38, 0x24, 0x72, 0x00,",
-		"½":"0x21, 0x17, 0x78, 0x54, 0x5e, 0x00,",
-		"¾":"0x00, 0x00, 0x00, 0x00, 0x00, 0x00,",
-		"¿":"0x30, 0x48, 0x45, 0x40, 0x20, 0x00,",
-		"À":"0x78, 0x15, 0x16, 0x14, 0x78, 0x00,",
-		"Á":"0x78, 0x14, 0x16, 0x15, 0x78, 0x00,",
-		"Â":"0x78, 0x16, 0x15, 0x16, 0x78, 0x00,",
-		"Ã":"0x7a, 0x29, 0x2a, 0x79, 0x00, 0x00,",
-		"Ä":"0x78, 0x15, 0x14, 0x15, 0x78, 0x00,",
-		"Å":"0x78, 0x14, 0x15, 0x14, 0x78, 0x00,",
-		"Æ":"0x7e, 0x09, 0x7f, 0x49, 0x49, 0x00,",
-		"Ç":"0x0e, 0x51, 0x71, 0x11, 0x08, 0x00,",
-		"È":"0x7c, 0x55, 0x56, 0x44, 0x44, 0x00,",
-		"É":"0x7c, 0x54, 0x56, 0x45, 0x44, 0x00,",
-		"Ê":"0x7c, 0x56, 0x55, 0x46, 0x44, 0x00,",
-		"Ë":"0x7c, 0x55, 0x54, 0x45, 0x44, 0x00,",
-		"Ì":"0x00, 0x49, 0x7a, 0x48, 0x00, 0x00,",
-		"Í":"0x00, 0x48, 0x7a, 0x49, 0x00, 0x00,",
-		"Î":"0x00, 0x4a, 0x79, 0x4a, 0x00, 0x00,",
-		"Ï":"0x44, 0x45, 0x7c, 0x45, 0x44, 0x00,",
-		"Ð":"0x08, 0x7f, 0x49, 0x22, 0x1c, 0x00,",
-		"Ñ":"0x7a, 0x11, 0x22, 0x79, 0x00, 0x00,",
-		"Ò":"0x38, 0x45, 0x46, 0x44, 0x38, 0x00,",
-		"Ó":"0x38, 0x44, 0x46, 0x45, 0x38, 0x00,",
-		"Ô":"0x38, 0x46, 0x45, 0x46, 0x38, 0x00,",
-		"Õ":"0x32, 0x49, 0x4a, 0x31, 0x00, 0x00,",
-		"Ö":"0x38, 0x45, 0x44, 0x45, 0x38, 0x00,",
-		"×":"0x22, 0x14, 0x08, 0x14, 0x22, 0x00,",
-		"Ø":"0x58, 0x24, 0x54, 0x48, 0x34, 0x00,",
-		"Ù":"0x38, 0x41, 0x42, 0x40, 0x38, 0x00,",
-		"Ú":"0x38, 0x40, 0x42, 0x41, 0x38, 0x00,",
-		"Û":"0x38, 0x42, 0x41, 0x42, 0x38, 0x00,",
-		"Ü":"0x3c, 0x41, 0x40, 0x41, 0x3c, 0x00,",
-		"Ý":"0x04, 0x08, 0x72, 0x09, 0x04, 0x00,",
-		"Þ":"0x7f, 0x22, 0x22, 0x22, 0x1c, 0x00,",
-		"ß":"0x7e, 0x11, 0x25, 0x25, 0x1a, 0x00,",
-		"à":"0x20, 0x55, 0x56, 0x54, 0x78, 0x00,",
-		"á":"0x20, 0x54, 0x56, 0x55, 0x78, 0x00,",
-		"â":"0x20, 0x56, 0x55, 0x56, 0x78, 0x00,",
-		"ã":"0x22, 0x55, 0x56, 0x55, 0x78, 0x00,",
-		"ä":"0x20, 0x55, 0x54, 0x55, 0x78, 0x00,",
-		"å":"0x20, 0x54, 0x55, 0x54, 0x78, 0x00,",
-		"æ":"0x24, 0x54, 0x7c, 0x54, 0x48, 0x00,",
-		"ç":"0x1c, 0x22, 0x62, 0x22, 0x10, 0x00,",
-		"è":"0x38, 0x55, 0x56, 0x54, 0x08, 0x00,",
-		"é":"0x38, 0x54, 0x56, 0x55, 0x08, 0x00,",
-		"ê":"0x38, 0x56, 0x55, 0x56, 0x08, 0x00,",
-		"ë":"0x38, 0x55, 0x54, 0x55, 0x08, 0x00,",
-		"ì":"0x00, 0x45, 0x7e, 0x40, 0x00, 0x00,",
-		"í":"0x00, 0x44, 0x7e, 0x41, 0x00, 0x00,",
-		"î":"0x00, 0x46, 0x7d, 0x42, 0x00, 0x00,",
-		"ï":"0x00, 0x45, 0x7c, 0x41, 0x00, 0x00,",
-		"ð":"0x00, 0x00, 0x00, 0x00, 0x00, 0x00,",
-		"ñ":"0x78, 0x12, 0x09, 0x0a, 0x71, 0x00,",
-		"ò":"0x38, 0x45, 0x46, 0x44, 0x38, 0x00,",
-		"ó":"0x38, 0x44, 0x46, 0x45, 0x38, 0x00,",
-		"ô":"0x38, 0x46, 0x45, 0x46, 0x38, 0x00,",
-		"õ":"0x32, 0x49, 0x4a, 0x31, 0x00, 0x00,",
-		"ö":"0x38, 0x45, 0x44, 0x45, 0x38, 0x00,",
-		"÷":"0x08, 0x08, 0x2a, 0x08, 0x08, 0x00,",
-		"ø":"0x58, 0x24, 0x54, 0x48, 0x34, 0x00,",
-		"ù":"0x3c, 0x41, 0x42, 0x20, 0x7c, 0x00,",
-		"ú":"0x3c, 0x40, 0x42, 0x21, 0x7c, 0x00,",
-		"û":"0x3c, 0x42, 0x41, 0x22, 0x7c, 0x00,",
-		"ü":"0x3c, 0x41, 0x40, 0x21, 0x5c, 0x00,",
-		"ý":"0x44, 0x48, 0x32, 0x11, 0x0c, 0x00,",
-		"þ":"0x7c, 0x28, 0x28, 0x10, 0x00, 0x00,",
-		"ÿ":"0x44, 0x49, 0x30, 0x11, 0x0c, 0x00,",
-		"Ѐ":"0x7c, 0x55, 0x56, 0x44, 0x44, 0x00,",
-		"Ё":"0x7c, 0x55, 0x54, 0x45, 0x44, 0x00,",
-		"Ђ":"0x01, 0x7f, 0x09, 0x49, 0x31, 0x00,",
-		"Ѓ":"0x7c, 0x04, 0x06, 0x05, 0x04, 0x00,",
-		"Є":"0x3e, 0x49, 0x49, 0x41, 0x00, 0x00,",
-		"Ѕ":"0x06, 0x49, 0x49, 0x49, 0x30, 0x00,",
-		"І":"0x41, 0x41, 0x7f, 0x41, 0x41, 0x00,",
-		"Ї":"0x44, 0x45, 0x7c, 0x45, 0x44, 0x00,",
-		"Ј":"0x20, 0x40, 0x41, 0x3f, 0x01, 0x00,",
-		"Љ":"0x7f, 0x01, 0x7f, 0x48, 0x30, 0x00,",
-		"Њ":"0x7f, 0x08, 0x7f, 0x48, 0x30, 0x00,",
-		"Ћ":"0x01, 0x01, 0x7f, 0x09, 0x71, 0x00,",
-		"Ќ":"0x7c, 0x12, 0x29, 0x44, 0x00, 0x00,",
-		"Ѝ":"0x7c, 0x21, 0x12, 0x08, 0x7c, 0x00,",
-		"Ў":"0x44, 0x49, 0x32, 0x09, 0x04, 0x00,",
-		"Џ":"0x3f, 0x20, 0x60, 0x20, 0x3f, 0x00,",
-		"А":"0x7e, 0x09, 0x09, 0x09, 0x7e, 0x00,",
-		"Б":"0x7f, 0x49, 0x49, 0x49, 0x31, 0x00,",
-		"В":"0x7f, 0x49, 0x49, 0x49, 0x36, 0x00,",
-		"Г":"0x7f, 0x01, 0x01, 0x01, 0x01, 0x00,",
-		"Д":"0x60, 0x3f, 0x21, 0x3f, 0x60, 0x00,",
-		"Е":"0x7f, 0x49, 0x49, 0x49, 0x41, 0x00,",
-		"Ж":"0x77, 0x08, 0x7f, 0x08, 0x77, 0x00,",
-		"З":"0x00, 0x41, 0x49, 0x49, 0x36, 0x00,",
-		"И":"0x7f, 0x10, 0x08, 0x04, 0x7f, 0x00,",
-		"Й":"0x7c, 0x21, 0x12, 0x09, 0x7c, 0x00,",
-		"К":"0x7f, 0x08, 0x14, 0x22, 0x41, 0x00,",
-		"Л":"0x40, 0x3f, 0x01, 0x01, 0x7f, 0x00,",
-		"М":"0x7f, 0x02, 0x04, 0x02, 0x7f, 0x00,",
-		"Н":"0x7f, 0x08, 0x08, 0x08, 0x7f, 0x00,",
-		"О":"0x3e, 0x41, 0x41, 0x41, 0x3e, 0x00,",
-		"П":"0x7f, 0x01, 0x01, 0x01, 0x7f, 0x00,",
-		"Р":"0x7f, 0x09, 0x09, 0x09, 0x06, 0x00,",
-		"С":"0x3e, 0x41, 0x41, 0x41, 0x22, 0x00,",
-		"Т":"0x01, 0x01, 0x7f, 0x01, 0x01, 0x00,",
-		"У":"0x47, 0x48, 0x30, 0x08, 0x07, 0x00,",
-		"Ф":"0x0c, 0x12, 0x7f, 0x12, 0x0c, 0x00,",
-		"Х":"0x63, 0x14, 0x08, 0x14, 0x63, 0x00,",
-		"Ц":"0x3f, 0x20, 0x20, 0x3f, 0x60, 0x00,",
-		"Ч":"0x07, 0x08, 0x08, 0x08, 0x7f, 0x00,",
-		"Ш":"0x3f, 0x20, 0x3f, 0x20, 0x3f, 0x00,",
-		"Щ":"0x3f, 0x20, 0x3f, 0x20, 0x3f, 0x60,",
-		"Ъ":"0x01, 0x7f, 0x48, 0x48, 0x30, 0x00,",
-		"Ы":"0x7f, 0x48, 0x30, 0x00, 0x7f, 0x00,",
-		"Ь":"0x00, 0x7f, 0x48, 0x48, 0x30, 0x00,",
-		"Э":"0x22, 0x49, 0x49, 0x2a, 0x1c, 0x00,",
-		"Ю":"0x7f, 0x08, 0x3e, 0x41, 0x3e, 0x00,",
-		"Я":"0x46, 0x29, 0x19, 0x09, 0x7f, 0x00,",
-		"а":"0x20, 0x54, 0x54, 0x54, 0x78, 0x00,",
-		"б":"0x3c, 0x4a, 0x4a, 0x4a, 0x30, 0x00,",
-		"в":"0x7c, 0x54, 0x54, 0x54, 0x28, 0x00,",
-		"г":"0x7c, 0x04, 0x04, 0x04, 0x04, 0x00,",
-		"д":"0x40, 0x3c, 0x24, 0x3c, 0x60, 0x00,",
-		"е":"0x38, 0x54, 0x54, 0x54, 0x18, 0x00,",
-		"ж":"0x6c, 0x10, 0x7c, 0x10, 0x6c, 0x00,",
-		"з":"0x28, 0x44, 0x54, 0x54, 0x28, 0x00,",
-		"и":"0x7c, 0x20, 0x10, 0x08, 0x7c, 0x00,",
-		"й":"0x7c, 0x21, 0x12, 0x09, 0x7c, 0x00,",
-		"к":"0x7c, 0x10, 0x28, 0x44, 0x00, 0x00,",
-		"л":"0x40, 0x3c, 0x04, 0x04, 0x7c, 0x00,",
-		"м":"0x7c, 0x08, 0x10, 0x08, 0x7c, 0x00,",
-		"н":"0x7c, 0x10, 0x10, 0x10, 0x7c, 0x00,",
-		"о":"0x38, 0x44, 0x44, 0x44, 0x38, 0x00,",
-		"п":"0x7c, 0x04, 0x04, 0x04, 0x7c, 0x00,",
-		"р":"0x7c, 0x14, 0x14, 0x14, 0x08, 0x00,",
-		"с":"0x38, 0x44, 0x44, 0x44, 0x20, 0x00,",
-		"т":"0x04, 0x04, 0x7c, 0x04, 0x04, 0x00,",
-		"у":"0x4c, 0x50, 0x20, 0x10, 0x0c, 0x00,",
-		"ф":"0x18, 0x24, 0x7e, 0x24, 0x18, 0x00,",
-		"х":"0x44, 0x28, 0x10, 0x28, 0x44, 0x00,",
-		"ц":"0x3c, 0x20, 0x20, 0x3c, 0x60, 0x00,",
-		"ч":"0x0c, 0x10, 0x10, 0x10, 0x7c, 0x00,",
-		"ш":"0x3c, 0x20, 0x3c, 0x20, 0x3c, 0x00,",
-		"щ":"0x3c, 0x20, 0x3c, 0x20, 0x7c, 0x00,",
-		"ъ":"0x04, 0x7c, 0x50, 0x20, 0x00, 0x00,",
-		"ы":"0x7c, 0x50, 0x20, 0x00, 0x7c, 0x00,",
-		"ь":"0x00, 0x7c, 0x50, 0x20, 0x00, 0x00,",
-		"э":"0x28, 0x44, 0x54, 0x54, 0x28, 0x00,",
-		"ю":"0x7c, 0x10, 0x38, 0x44, 0x38, 0x00,",
-		"я":"0x48, 0x34, 0x14, 0x14, 0x7c, 0x00,",
-		"ѐ":"0x38, 0x55, 0x56, 0x54, 0x08, 0x00,",
-		"ё":"0x38, 0x55, 0x54, 0x55, 0x08, 0x00,",
-		"ђ":"0x02, 0x3f, 0x12, 0x48, 0x30, 0x00,",
-		"ѓ":"0x7c, 0x04, 0x06, 0x05, 0x04, 0x00,",
-		"є":"0x38, 0x54, 0x54, 0x44, 0x28, 0x00,",
-		"ѕ":"0x08, 0x54, 0x54, 0x54, 0x20, 0x00,",
-		"і":"0x00, 0x44, 0x7d, 0x40, 0x00, 0x00,",
-		"ї":"0x00, 0x45, 0x7c, 0x41, 0x00, 0x00,",
-		"ј":"0x20, 0x40, 0x44, 0x3d, 0x00, 0x00,",
-		"љ":"0x7c, 0x04, 0x7c, 0x50, 0x20, 0x00,",
-		"њ":"0x7c, 0x10, 0x7c, 0x50, 0x20, 0x00,",
-		"ћ":"0x04, 0x7e, 0x14, 0x10, 0x60, 0x00,",
-		"ќ":"0x7c, 0x12, 0x29, 0x44, 0x00, 0x00,",
-		"ѝ":"0x7c, 0x21, 0x12, 0x08, 0x7c, 0x00,",
-		"ў":"0x4c, 0x51, 0x22, 0x11, 0x0c, 0x00,",
-		"џ":"0x3c, 0x20, 0x60, 0x20, 0x3c, 0x00,",
-		"Ā":"0x78, 0x15, 0x15, 0x15, 0x78, 0x00,",
-		"ā":"0x20, 0x55, 0x55, 0x55, 0x78, 0x00,",
-		"Ă":"0x78, 0x15, 0x16, 0x15, 0x78, 0x00,",
-		"ă":"0x20, 0x55, 0x56, 0x55, 0x78, 0x00,",
-		"Ą":"0x7e, 0x09, 0x09, 0x49, 0xbe, 0x00,",
-		"ą":"0x20, 0x54, 0x54, 0xd4, 0x78, 0x00,",
-		"Ć":"0x38, 0x44, 0x46, 0x45, 0x28, 0x00,",
-		"ć":"0x38, 0x44, 0x46, 0x45, 0x20, 0x00,",
-		"Ĉ":"0x38, 0x46, 0x45, 0x46, 0x28, 0x00,",
-		"ĉ":"0x38, 0x46, 0x45, 0x46, 0x20, 0x00,",
-		"Ċ":"0x38, 0x44, 0x45, 0x44, 0x28, 0x00,",
-		"ċ":"0x38, 0x44, 0x45, 0x44, 0x20, 0x00,",
-		"Č":"0x38, 0x45, 0x46, 0x45, 0x28, 0x00,",
-		"č":"0x38, 0x45, 0x46, 0x45, 0x20, 0x00,",
-		"Ď":"0x7c, 0x45, 0x46, 0x29, 0x10, 0x00,",
-		"ď":"0x00, 0x00, 0x00, 0x00, 0x00, 0x00,",
-		"Đ":"0x08, 0x7f, 0x49, 0x22, 0x1c, 0x00,",
-		"đ":"0x38, 0x44, 0x44, 0x4A, 0x7F, 0x00,",
-		"Ē":"0x7c, 0x55, 0x55, 0x55, 0x44, 0x00,",
-		"ē":"0x38, 0x55, 0x55, 0x55, 0x08, 0x00,",
-		"Ĕ":"0x7c, 0x55, 0x56, 0x55, 0x44, 0x00,",
-		"ĕ":"0x38, 0x55, 0x56, 0x55, 0x08, 0x00,",
-		"Ė":"0x7c, 0x54, 0x55, 0x54, 0x44, 0x00,",
-		"ė":"0x38, 0x54, 0x55, 0x54, 0x08, 0x00,",
-		"Ę":"0x7f, 0x49, 0x49, 0xc9, 0x41, 0x00,",
-		"ę":"0x38, 0x54, 0x54, 0xd4, 0x18, 0x00,",
-		"Ě":"0x7c, 0x55, 0x56, 0x55, 0x44, 0x00,",
-		"ě":"0x38, 0x55, 0x56, 0x55, 0x08, 0x00,",
-		"Ĝ":"0x38, 0x46, 0x55, 0x56, 0x70, 0x00,",
-		"ĝ":"0x08, 0x56, 0x55, 0x56, 0x3c, 0x00,",
-		"Ğ":"0x38, 0x45, 0x56, 0x55, 0x30, 0x00,",
-		"ğ":"0x08, 0x55, 0x56, 0x55, 0x3c, 0x00,",
-		"Ġ":"0x38, 0x44, 0x55, 0x54, 0x30, 0x00,",
-		"ġ":"0x08, 0x54, 0x55, 0x54, 0x3c, 0x00,",
-		"Ģ":"0x0e, 0x51, 0x35, 0x15, 0x1c, 0x00,",
-		"ģ":"0x00, 0x00, 0x00, 0x00, 0x00, 0x00,",
-		"Ĥ":"0x7c, 0x12, 0x11, 0x12, 0x7c, 0x00,",
-		"ĥ":"0x02, 0x79, 0x22, 0x10, 0x60, 0x00,",
-		"Ħ":"0x02, 0x7f, 0x0a, 0x7f, 0x02, 0x00,",
-		"ħ":"0x02, 0x7f, 0x12, 0x08, 0x70, 0x00,",
-		"Ĩ":"0x4a, 0x49, 0x7a, 0x49, 0x48, 0x00,",
-		"ĩ":"0x02, 0x49, 0x7a, 0x41, 0x00, 0x00,",
-		"Ī":"0x44, 0x45, 0x7d, 0x45, 0x44, 0x00,",
-		"ī":"0x00, 0x45, 0x7d, 0x41, 0x00, 0x00,",
-		"Ĭ":"0x44, 0x45, 0x7e, 0x45, 0x44, 0x00,",
-		"ĭ":"0x00, 0x45, 0x7e, 0x41, 0x00, 0x00,",
-		"Į":"0x00, 0x41, 0x7f, 0xc1, 0x00, 0x00,",
-		"į":"0x00, 0x44, 0x7d, 0xc0, 0x00, 0x00,",
-		"İ":"0x44, 0x44, 0x7d, 0x44, 0x44, 0x00,",
-		"ı":"0x00, 0x44, 0x7c, 0x40, 0x00, 0x00,",
-		"IJ":"0x00, 0x00, 0x00, 0x00, 0x00, 0x00,",
-		"ij":"0x44, 0x7d, 0x40, 0x44, 0x3d, 0x00,",
-		"Ĵ":"0x20, 0x40, 0x46, 0x3d, 0x06, 0x00,",
-		"ĵ":"0x00, 0x20, 0x46, 0x3d, 0x02, 0x00,",
-		"Ķ":"0x1f, 0x44, 0x2a, 0x11, 0x00, 0x00,",
-		"ķ":"0x1f, 0x44, 0x2a, 0x11, 0x00, 0x00,",
-		"ĸ":"0x7c, 0x10, 0x28, 0x44, 0x00, 0x00,",
-		"Ĺ":"0x7c, 0x40, 0x42, 0x41, 0x40, 0x00,",
-		"ĺ":"0x00, 0x44, 0x7e, 0x41, 0x00, 0x00,",
-		"Ļ":"0x1f, 0x50, 0x30, 0x10, 0x10, 0x00,",
-		"ļ":"0x00, 0x51, 0x3f, 0x10, 0x00, 0x00,",
-		"Ľ":"0x00, 0x00, 0x00, 0x00, 0x00, 0x00,",
-		"ľ":"0x00, 0x00, 0x00, 0x00, 0x00, 0x00,",
-		"Ŀ":"0x7f, 0x40, 0x40, 0x48, 0x40, 0x00,",
-		"ŀ":"0x00, 0x41, 0x7f, 0x40, 0x08, 0x00,",
-		"Ł":"0x00, 0x00, 0x00, 0x00, 0x00, 0x00,",
-		"ł":"0x00, 0x00, 0x00, 0x00, 0x00, 0x00,",
-		"Ń":"0x7c, 0x08, 0x12, 0x21, 0x7c, 0x00,",
-		"ń":"0x7c, 0x08, 0x06, 0x05, 0x78, 0x00,",
-		"Ņ":"0x1f, 0x42, 0x24, 0x08, 0x1f, 0x00,",
-		"ņ":"0x1f, 0x42, 0x21, 0x01, 0x1e, 0x00,",
-		"Ň":"0x7c, 0x09, 0x12, 0x21, 0x7c, 0x00,",
-		"ň":"0x7c, 0x09, 0x06, 0x05, 0x78, 0x00,",
-		"ʼn":"0x00, 0x00, 0x00, 0x00, 0x00, 0x00,",
-		"Ŋ":"0x00, 0x00, 0x00, 0x00, 0x00, 0x00,",
-		"ŋ":"0x00, 0x00, 0x00, 0x00, 0x00, 0x00,",
-		"Ō":"0x38, 0x45, 0x45, 0x45, 0x38, 0x00,",
-		"ō":"0x38, 0x45, 0x45, 0x45, 0x38, 0x00,",
-		"Ŏ":"0x38, 0x45, 0x46, 0x45, 0x38, 0x00,",
-		"ŏ":"0x38, 0x45, 0x46, 0x45, 0x38, 0x00,",
-		"Ő":"0x00, 0x00, 0x00, 0x00, 0x00, 0x00,",
-		"ő":"0x00, 0x00, 0x00, 0x00, 0x00, 0x00,",
-		"Œ":"0x3e, 0x41, 0x7f, 0x49, 0x49, 0x00,",
-		"œ":"0x38, 0x44, 0x7c, 0x54, 0x58, 0x00,",
-		"Ŕ":"0x7c, 0x14, 0x16, 0x15, 0x68, 0x00,",
-		"ŕ":"0x7c, 0x08, 0x06, 0x05, 0x08, 0x00,",
-		"Ŗ":"0x1f, 0x45, 0x25, 0x05, 0x1a, 0x00,",
-		"ŗ":"0x1f, 0x42, 0x21, 0x01, 0x02, 0x00,",
-		"Ř":"0x7c, 0x15, 0x16, 0x15, 0x68, 0x00,",
-		"ř":"0x7c, 0x09, 0x06, 0x05, 0x08, 0x00,",
-		"Ś":"0x08, 0x54, 0x56, 0x55, 0x20, 0x00,",
-		"ś":"0x48, 0x54, 0x56, 0x55, 0x24, 0x00,",
-		"Ŝ":"0x08, 0x56, 0x55, 0x56, 0x20, 0x00,",
-		"ŝ":"0x48, 0x56, 0x55, 0x56, 0x24, 0x00,",
-		"Ş":"0x02, 0x55, 0x35, 0x15, 0x08, 0x00,",
-		"ş":"0x12, 0x55, 0x35, 0x15, 0x09, 0x00,",
-		"Š":"0x08, 0x55, 0x56, 0x55, 0x20, 0x00,",
-		"š":"0x48, 0x55, 0x56, 0x55, 0x24, 0x00,",
-		"Ţ":"0x01, 0x41, 0x3f, 0x01, 0x01, 0x00,",
-		"ţ":"0x02, 0x4f, 0x32, 0x10, 0x08, 0x00,",
-		"Ť":"0x04, 0x05, 0x7e, 0x05, 0x04, 0x00,",
-		"ť":"0x00, 0x00, 0x00, 0x00, 0x00, 0x00,",
-		"Ŧ":"0x01, 0x09, 0x7f, 0x09, 0x01, 0x00,",
-		"ŧ":"0x14, 0x3e, 0x54, 0x40, 0x20, 0x00,",
-		"Ũ":"0x00, 0x00, 0x00, 0x00, 0x00, 0x00,",
-		"ũ":"0x00, 0x00, 0x00, 0x00, 0x00, 0x00,",
-		"Ū":"0x3c, 0x41, 0x41, 0x41, 0x3c, 0x00,",
-		"ū":"0x3c, 0x41, 0x41, 0x21, 0x7c, 0x00,",
-		"Ŭ":"0x3c, 0x41, 0x42, 0x41, 0x3c, 0x00,",
-		"ŭ":"0x3c, 0x41, 0x41, 0x21, 0x7c, 0x00,",
-		"Ů":"0x3c, 0x40, 0x41, 0x40, 0x3c, 0x00,",
-		"ů":"0x3c, 0x41, 0x41, 0x21, 0x7c, 0x00,",
-		"Ű":"0x00, 0x00, 0x00, 0x00, 0x00, 0x00,",
-		"ű":"0x00, 0x00, 0x00, 0x00, 0x00, 0x00,",
-		"Ų":"0x00, 0x00, 0x00, 0x00, 0x00, 0x00,",
-		"ų":"0x00, 0x00, 0x00, 0x00, 0x00, 0x00,",
-		"Ŵ":"0x3c, 0x42, 0x39, 0x42, 0x3c, 0x00,",
-		"ŵ":"0x3c, 0x42, 0x31, 0x42, 0x3c, 0x00,",
-		"Ŷ":"0x04, 0x0a, 0x71, 0x0a, 0x04, 0x00,",
-		"ŷ":"0x04, 0x4a, 0x31, 0x12, 0x0c, 0x00,",
-		"Ÿ":"0x04, 0x09, 0x70, 0x09, 0x04, 0x00,",
-		"Ź":"0x44, 0x64, 0x56, 0x4d, 0x44, 0x00,",
-		"ź":"0x44, 0x64, 0x56, 0x4d, 0x44, 0x00,",
-		"Ż":"0x44, 0x64, 0x55, 0x4c, 0x44, 0x00,",
-		"ż":"0x44, 0x64, 0x55, 0x4c, 0x44, 0x00,",
-		"Ž":"0x44, 0x65, 0x56, 0x4d, 0x44, 0x00,",
-		"ž":"0x44, 0x65, 0x56, 0x4d, 0x44, 0x00,",
-		"ſ":"0x00, 0x04, 0x7e, 0x01, 0x01, 0x00,",
-	}
-	return font

Translation Editor/make_translation.py

@@ -1,542 +0,0 @@
-#!/usr/bin/env python3
-# coding=utf-8
-from __future__ import print_function
-import json
-import os
-import io
-from datetime import datetime
-import sys
-import fontTables
-import re
-import subprocess
-
-TRANSLATION_CPP = "Translation.cpp"
-UNIT_H = "unit.h"
-
-try:
-    to_unicode = unicode
-except NameError:
-    to_unicode = str
-
-
-# Loading a single JSON file
-def loadJson(fileName, skipFirstLine):
-    with io.open(fileName, mode="r", encoding="utf-8") as f:
-        if skipFirstLine:
-            f.readline()
-
-        obj = json.loads(f.read())
-
-    return obj
-
-
-# Reading all language translations into a dictionary by langCode
-def readTranslations(jsonDir):
-    langDict = {}
-    UnitDict = {}
-
-    # Read all translation files from the input dir
-    for fileName in os.listdir(jsonDir):
-
-        fileWithPath = os.path.join(jsonDir, fileName)
-        lf = fileName.lower()
-
-        # Read only translation_XX.json
-        if lf.startswith("translation_") and lf.endswith(".json"):
-            try:
-                lang = loadJson(fileWithPath, False)
-            except json.decoder.JSONDecodeError as e:
-                print("Failed to decode " + lf)
-                print(str(e))
-                sys.exit(2)
-
-            # Extract lang code from file name
-            langCode = fileName[12:-5].upper()
-            # ...and the one specified in the JSON file...
-            try:
-                langCodeFromJson = lang['languageCode']
-            except KeyError:
-                langCodeFromJson = "(missing)"
-
-            try:
-                TempUnitF_FromJson = lang['tempUnitFahrenheit']
-            except KeyError:
-                TempUnitF_FromJson = True # Default to true.
-            
-            # ...cause they should be the same!
-            if langCode != langCodeFromJson:
-                raise ValueError("Invalid languageCode " + langCodeFromJson +
-                                 " in file " + fileName)
-
-            langDict[langCode] = lang
-            UnitDict[langCode] = TempUnitF_FromJson
-    return langDict, UnitDict
-
-
-def writeStart(f):
-    f.write(
-        to_unicode(
-            """// WARNING: THIS FILE WAS AUTO GENERATED BY make_translation.py. PLEASE DO NOT EDIT.
-
-#include "Translation.h"
-#ifndef LANG
-#define LANG_EN
-#endif
-"""))
-
-
-def writeStartUnit(f):
-    f.write(
-        to_unicode(
-            """// WARNING: THIS FILE WAS AUTO GENERATED BY make_translation.py. PLEASE DO NOT EDIT.
- 
-/**
- * °F Fahrenheit Support
- * You will find the default Fahrenheit configuration in the translation_xx.json
- * If tempUnitFahrenheit is set to:
- *    true -  you can switch in menu settings to Fahrenheit or Celsius.
- *    false - you see only Celsius. All settings are then is in Celsius only.
- */
-
-#ifndef _UNIT_H
-#define _UNIT_H\n
-"""))
-
-def escapeC(s):
-    return s.replace("\"", "\\\"")
-
-
-def getConstants():
-    # Extra constants that are used in the firmware that are shared across all languages
-    consants = []
-    consants.append(('SymbolPlus', '+'))
-    consants.append(('SymbolMinus', '-'))
-    consants.append(('SymbolSpace', ' '))
-    consants.append(('SymbolDot', '.'))
-    consants.append(('SymbolDegC', 'C'))
-    consants.append(('SymbolDegF', 'F'))
-    consants.append(('SymbolMinutes', 'M'))
-    consants.append(('SymbolSeconds', 'S'))
-    consants.append(('SymbolWatts', 'W'))
-    consants.append(('SymbolVolts', 'V'))
-    consants.append(('SymbolDC', 'DC'))
-    consants.append(('SymbolCellCount', 'S'))
-    consants.append(('SymbolVersionNumber', buildVersion))
-    return consants
-
-
-
-def getDebugMenu():
-    constants = []
-    constants.append(datetime.today().strftime('%d-%m-%y'))
-    constants.append("HW G ")
-    constants.append("HW M ")
-    constants.append("HW P ")
-    constants.append("Time ")
-    constants.append("Move ")
-    constants.append("RTip ")
-    constants.append("CTip ")
-    constants.append("CHan ")
-    constants.append("Vin  ")
-    constants.append("PCB  ")  # PCB Version AKA IMU version
-    return constants
-
-
-def getLetterCounts(defs, lang):
-    textList = []
-    # iterate over all strings
-    obj = lang['menuOptions']
-    for mod in defs['menuOptions']:
-        eid = mod['id']
-        textList.append(obj[eid]['desc'])
-
-    obj = lang['messages']
-    for mod in defs['messages']:
-        eid = mod['id']
-        if eid not in obj:
-            textList.append(mod['default'])
-        else:
-            textList.append(obj[eid])
-
-    obj = lang['characters']
-
-    for mod in defs['characters']:
-        eid = mod['id']
-        textList.append(obj[eid])
-
-    obj = lang['menuOptions']
-    for mod in defs['menuOptions']:
-        eid = mod['id']
-        textList.append(obj[eid]['text2'][0])
-        textList.append(obj[eid]['text2'][1])
-
-    obj = lang['menuGroups']
-    for mod in defs['menuGroups']:
-        eid = mod['id']
-        textList.append(obj[eid]['text2'][0])
-        textList.append(obj[eid]['text2'][1])
-
-    obj = lang['menuGroups']
-    for mod in defs['menuGroups']:
-        eid = mod['id']
-        textList.append(obj[eid]['desc'])
-    constants = getConstants()
-    for x in constants:
-        textList.append(x[1])
-    textList.extend(getDebugMenu())
-
-    # collapse all strings down into the composite letters and store totals for these
-
-    symbolCounts = {}
-    for line in textList:
-        line = line.replace('\n', '').replace('\r', '')
-        line = line.replace('\\n', '').replace('\\r', '')
-        if len(line):
-            # print(line)
-            for letter in line:
-                symbolCounts[letter] = symbolCounts.get(letter, 0) + 1
-    symbolCounts = sorted(
-        symbolCounts.items(),
-        key=lambda kv: (kv[1], kv[0]))  # swap to Big -> little sort order
-    symbolCounts = list(map(lambda x: x[0], symbolCounts))
-    symbolCounts.reverse()
-    return symbolCounts
-
-
-def getFontMapAndTable(textList):
-    # the text list is sorted
-    # allocate out these in their order as number codes
-    symbolMap = {}
-    symbolMap['\n'] = '\\x01'  # Force insert the newline char
-    index = 2  # start at 2, as 0= null terminator,1 = new line
-    forcedFirstSymbols = ['0', '1', '2', '3', '4', '5', '6', '7', '8', '9']
-    # enforce numbers are first
-    for sym in forcedFirstSymbols:
-        symbolMap[sym] = "\\x%0.2X" % index
-        index = index + 1
-    if len(textList) > (253 - len(forcedFirstSymbols)):
-        print('Error, too many used symbols for this version')
-        exit(1)
-    print('Generating fonts for {} symbols'.format(len(textList)))
-
-    for sym in textList:
-        if sym not in symbolMap:
-            symbolMap[sym] = "\\x%0.2X" % index
-            index = index + 1
-    # Get the font table
-    fontTableStrings = []
-    fontSmallTableStrings = []
-    fontTable = fontTables.getFontMap()
-    fontSmallTable = fontTables.getSmallFontMap()
-    for sym in forcedFirstSymbols:
-        if sym not in fontTable:
-            print('Missing Large font element for {}'.format(sym))
-            exit(1)
-        fontLine = fontTable[sym]
-        fontTableStrings.append(
-            fontLine + "//{} -> {}".format(symbolMap[sym], sym))
-        if sym not in fontSmallTable:
-            print('Missing Small font element for {}'.format(sym))
-            exit(1)
-        fontLine = fontSmallTable[sym]
-        fontSmallTableStrings.append(
-            fontLine + "//{} -> {}".format(symbolMap[sym], sym))
-
-    for sym in textList:
-        if sym not in fontTable:
-            print('Missing Large font element for {}'.format(sym))
-            exit(1)
-        if sym not in forcedFirstSymbols:
-            fontLine = fontTable[sym]
-            fontTableStrings.append(
-                fontLine + "//{} -> {}".format(symbolMap[sym], sym))
-            if sym not in fontSmallTable:
-                print('Missing Small font element for {}'.format(sym))
-                exit(1)
-            fontLine = fontSmallTable[sym]
-            fontSmallTableStrings.append(
-                fontLine + "//{} -> {}".format(symbolMap[sym], sym))
-    outputTable = "const uint8_t USER_FONT_12[] = {" + to_unicode("\n")
-    for line in fontTableStrings:
-        # join font table int one large string
-        outputTable = outputTable + line + to_unicode("\n")
-    outputTable = outputTable + "};" + to_unicode("\n")
-    outputTable = outputTable + "const uint8_t USER_FONT_6x8[] = {" + to_unicode(
-        "\n")
-    for line in fontSmallTableStrings:
-        # join font table int one large string
-        outputTable = outputTable + line + to_unicode("\n")
-    outputTable = outputTable + "};" + to_unicode("\n")
-    return (outputTable, symbolMap)
-
-
-def convStr(symbolConversionTable, text):
-    # convert all of the symbols from the string into escapes for their content
-    outputString = ""
-    for c in text.replace('\\r', '').replace('\\n', '\n'):
-        if c not in symbolConversionTable:
-            print('Missing font definition for {}'.format(c))
-        else:
-            outputString = outputString + symbolConversionTable[c]
-    return outputString
-
-
-def writeLanguage(languageCode, defs, f):
-    print("Generating block for " + languageCode)
-    lang = langDict[languageCode]
-    # Iterate over all of the text to build up the symbols & counts
-    textList = getLetterCounts(defs, lang)
-    # From the letter counts, need to make a symbol translator & write out the font
-    (fontTableText, symbolConversionTable) = getFontMapAndTable(textList)
-
-    f.write(to_unicode("\n#ifdef LANG_" + languageCode + "\n"))
-    f.write(fontTableText)
-    try:
-        langName = lang['languageLocalName']
-    except KeyError:
-        langName = languageCode
-
-    f.write(to_unicode("// ---- " + langName + " ----\n\n"))
-
-    # ----- Writing SettingsDescriptions
-    obj = lang['menuOptions']
-    f.write(to_unicode("const char* SettingsDescriptions[] = {\n"))
-
-    maxLen = 25
-    index =0
-    for mod in defs['menuOptions']:
-        eid = mod['id']
-        if 'feature' in mod:
-            f.write(to_unicode("#ifdef " + mod['feature'] + "\n"))
-        f.write(to_unicode("  /* ["+"{:02d}".format(index)+"] " + eid.ljust(maxLen)[:maxLen] + " */ "))
-        f.write(
-            to_unicode("\"" +
-                       convStr(symbolConversionTable, (obj[eid]['desc'])) +
-                       "\"," + "//{} \n".format(obj[eid]['desc'])))
-        if 'feature' in mod:
-            f.write(to_unicode("#endif\n"))
-        index=index+1
-
-    f.write(to_unicode("};\n\n"))
-
-    # ----- Writing Message strings
-
-    obj = lang['messages']
-
-    for mod in defs['messages']:
-        eid = mod['id']
-        sourceText = ""
-        if 'default' in mod:
-            sourceText = (mod['default'])
-        if eid in obj:
-            sourceText = (obj[eid])
-        translatedText = convStr(symbolConversionTable, sourceText)
-        f.write(
-            to_unicode("const char* " + eid + " = \"" +
-                       translatedText + "\";" + "//{} \n".format(sourceText.replace('\n', '_'))))
-
-    f.write(to_unicode("\n"))
-
-    # ----- Writing Characters
-
-    obj = lang['characters']
-
-    for mod in defs['characters']:
-        eid = mod['id']
-        f.write(
-            to_unicode("const char* " + eid + " = \"" +
-                       convStr(symbolConversionTable, obj[eid]) + "\";" + "//{} \n".format(obj[eid])))
-
-    f.write(to_unicode("\n"))
-
-    # Write out firmware constant options
-    constants = getConstants()
-    for x in constants:
-        f.write(
-            to_unicode("const char* " + x[0] + " = \"" +
-                       convStr(symbolConversionTable, x[1]) + "\";" + "//{} \n".format(x[1])))
-
-    f.write(to_unicode("\n"))
-
-    # Debug Menu
-    f.write(to_unicode("const char* DebugMenu[] = {\n"))
-
-    for c in getDebugMenu():
-        f.write(to_unicode("\t \"" + convStr(symbolConversionTable,
-                                             c) + "\"," + "//{} \n".format(c)))
-    f.write(to_unicode("};\n\n"))
-
-    # ----- Writing SettingsDescriptions
-    obj = lang['menuOptions']
-    f.write(to_unicode("const char* SettingsShortNames[][2] = {\n"))
-
-    maxLen = 25
-    index = 0
-    for mod in defs['menuOptions']:
-        eid = mod['id']
-        if 'feature' in mod:
-            f.write(to_unicode("#ifdef " + mod['feature'] + "\n"))
-        f.write(to_unicode("  /* ["+"{:02d}".format(index)+"] "   + eid.ljust(maxLen)[:maxLen] + " */ "))
-        f.write(
-            to_unicode(
-                "{ \"" +
-                convStr(symbolConversionTable, (obj[eid]['text2'][0])) +
-                "\", \"" +
-                convStr(symbolConversionTable, (obj[eid]['text2'][1])) +
-                "\" }," + "//{} \n".format(obj[eid]['text2'])))
-        
-        if 'feature' in mod:
-            f.write(to_unicode("#endif\n"))
-        index = index + 1 
-
-    f.write(to_unicode("};\n\n"))
-
-    # ----- Writing Menu Groups
-    obj = lang['menuGroups']
-    f.write(
-        to_unicode("const char* SettingsMenuEntries[" + str(len(obj)) +
-                   "] = {\n"))
-
-    maxLen = 25
-    for mod in defs['menuGroups']:
-        eid = mod['id']
-        f.write(to_unicode("  /* " + eid.ljust(maxLen)[:maxLen] + " */ "))
-        f.write(
-            to_unicode("\"" +
-                       convStr(symbolConversionTable, (obj[eid]['text2'][0]) +
-                               "\\n" + obj[eid]['text2'][1]) + "\"," + "//{} \n".format(obj[eid]['text2'])))
-
-    f.write(to_unicode("};\n\n"))
-
-    # ----- Writing Menu Groups Descriptions
-    obj = lang['menuGroups']
-    f.write(
-        to_unicode("const char* SettingsMenuEntriesDescriptions[" +
-                   str(len(obj)) + "] = {\n"))
-
-    maxLen = 25
-    for mod in defs['menuGroups']:
-        eid = mod['id']
-        f.write(to_unicode("  /* " + eid.ljust(maxLen)[:maxLen] + " */ "))
-        f.write(
-            to_unicode("\"" +
-                       convStr(symbolConversionTable, (obj[eid]['desc'])) +
-                       "\"," + "//{} \n".format(obj[eid]['desc'])))
-
-    f.write(to_unicode("};\n\n"))
-
-    # ----- Block end
-    f.write(to_unicode("#endif\n"))
-
-
-def writeUnit(languageCode, defs, f, UnitCodes):
-    print("Generating unit block for " + languageCode)
-    lang = langDict[languageCode]
-    unit = UnitDict[UnitCodes]
-    try:
-        langName = lang['languageLocalName']
-    except KeyError:
-        langName = languageCode
-    f.write(to_unicode("  #ifdef LANG_" + languageCode + "\n"))
-    if unit: 
-        f.write(to_unicode("    #define  ENABLED_FAHRENHEIT_SUPPORT" + "\n"))
-    else: f.write(to_unicode("    //#define  ENABLED_FAHRENHEIT_SUPPORT" + "\n"))
-    # ----- Block end
-    f.write(to_unicode("  #endif /* ---- " + langName + " ---- */\n"))
-
-def readVersion():
-    with open(os.path.relpath(jsonDir + 
-    "/../workspace/TS100/version.h"),"r") as version_file:
-        try: 
-            for line in version_file:
-                if re.findall(r'^.*(?<=(#define)).*(?<=(BUILD_VERSION))', line):
-                    line = re.findall(r'\"(.+?)\"',line)
-                    if line: 
-                        version = line[0]
-                        try: version += "."+ subprocess.check_output(
-                            ["git","rev-parse", "--short=7", "HEAD"]).strip().decode('ascii').upper()
-                            # --short=7: the shorted hash with 7 digits. Increase/decrease if needed!
-                        except OSError: version += " git"
-        finally: 
-            if version_file: 
-                version_file.close(); 
-                return version
-
-def read_opts():
-    """ Reading input parameters
-    First parameter = json directory
-    Second parameter = translation directory
-    Third paramter = unit directory
-    """
-    if len(sys.argv) > 1:
-        jsonDir = sys.argv[1]
-    else:
-        jsonDir = "."
-
-    if len(sys.argv) > 2:
-        outFileTranslationCPP = sys.argv[2]
-    else:
-        outDir = os.path.relpath(jsonDir + "/../workspace/TS100/Core/Src")
-        outFileTranslationCPP = os.path.join(outDir, TRANSLATION_CPP)
-    
-    if len(sys.argv) > 3:
-        outFileUnitH = sys.argv[3]
-    else:
-        outDir = os.path.relpath(jsonDir + "/../workspace/TS100/Core/Inc")
-        outFileUnitH = os.path.join(outDir,UNIT_H)
-
-    if len(sys.argv) > 4:
-        raise Exception("Too many parameters!")
-
-    return jsonDir, outFileTranslationCPP, outFileUnitH
-
-
-def orderOutput(langDict):
-    # These languages go first
-    mandatoryOrder = ['EN']
-
-    # Then add all others in alphabetical order
-    sortedKeys = sorted(langDict.keys())
-
-    # Add the rest as they come
-    for key in sortedKeys:
-        if key not in mandatoryOrder:
-            mandatoryOrder.append(key)
-
-    return mandatoryOrder
-
-
-def writeTarget(outFileTranslationCPP, outFileUnitH, defs, langCodes, UnitCodes):
-    # Start writing the file
-    with io.open(outFileTranslationCPP, 'w', encoding='utf-8', newline="\n") as f:
-        writeStart(f)
-        for langCode in langCodes:
-            writeLanguage(langCode, defs, f)
-
-    with io.open(outFileUnitH, 'w', encoding='utf-8', newline="\n") as f:
-        writeStartUnit(f)
-        for langCode, UnitCode in zip(langCodes, UnitCodes):
-            writeUnit(langCode, defs, f, UnitCode)
-        f.write(to_unicode("\n#endif /* _UNIT_H */\n"))
-
-if __name__ == "__main__":
-    try:
-        jsonDir, outFileTranslationCPP, outFileUnitH = read_opts()
-    except:
-        print("usage: make_translation.py {json dir} {cpp dir}")
-        sys.exit(1)
-
-    try: buildVersion = readVersion()
-    except: print("error: could not get/extract build version"); sys.exit(1)
-
-    print("Build version: " + buildVersion)
-    print("Making " + outFileTranslationCPP + " from " + jsonDir)
-    print("Making " + outFileUnitH + " from " + jsonDir)
-
-    langDict, UnitDict = readTranslations(jsonDir)
-    defs = loadJson(os.path.join(jsonDir, "translations_def.js"), True)
-    langCodes = orderOutput(langDict)
-    UnitCodes = orderOutput(UnitDict)
-    writeTarget(outFileTranslationCPP, outFileUnitH, defs, langCodes, UnitCodes)
-
-    print("Done")

Translation Editor/translation_bg.json

@@ -1,253 +0,0 @@
-{
-	"languageCode": "BG",
-	"languageLocalName": "Български",
-	"cyrillicGlyphs": true,
-	"messages": {
-		"SettingsCalibrationDone": "Калибрацията завършена!",
-		"SettingsCalibrationWarning": "Уверете се, че върха на поялника е със стайна температура преди да продължите!",
-		"SettingsResetWarning": "Сигурни ли сте, че искате да върнете фабричните настройки?",
-		"UVLOWarningString": "Ниско DC Напрежение",
-		"UndervoltageString": "Ниско Напрежение",
-		"InputVoltageString": "Входно V: ",
-		"WarningTipTempString": "Темп.: ",
-		"BadTipString": "ЛОШ ВРЪХ",
-		"SleepingSimpleString": "Сън",
-		"SleepingAdvancedString": "Хър Хър Хър...",
-		"WarningSimpleString": "ОХ!",
-		"WarningAdvancedString": "ВНИМАНИЕ! ТОПЛО!",
-		"SleepingTipAdvancedString": "Връх:",
-		"IdleTipString": "Връх:",
-		"IdleSetString": " Настройка:",
-		"TipDisconnectedString": "ПРЕКЪСНАТ ВРЪХ",
-		"SolderingAdvancedPowerPrompt": "Захранване: ",
-		"OffString": "Изкл.",
-		"ResetOKMessage": "Нулиране завършено",
-		"YourGainMessage": "Усилване:",
-		"SettingsResetMessage": "Настройките бяха\nнулирани!"
-	},
-	"characters": {
-		"SettingRightChar": "R",
-		"SettingLeftChar": "L",
-		"SettingAutoChar": "A",
-		"SettingFastChar": "F",
-		"SettingSlowChar": "S",
-		"SettingStartSolderingChar": "T",
-		"SettingStartSleepChar": "S",
-		"SettingStartSleepOffChar": "O",
-		"SettingStartNoneChar": "F"
-	},
-	"menuGroups": {
-		"SolderingMenu": {
-			"text2": [
-				"Поялник",
-				"Настройки"
-			],
-			"desc": "Настройки на поялника"
-		},
-		"PowerSavingMenu": {
-			"text2": [
-				"Режими",
-				"Настройки"
-			],
-			"desc": "Настройки енергоспестяване"
-		},
-		"UIMenu": {
-			"text2": [
-				"Интерфейс",
-				"Настройки"
-			],
-			"desc": "Настройки на интерфейса"
-		},
-		"AdvancedMenu": {
-			"text2": [
-				"Разширени",
-				"Настройки"
-			],
-			"desc": "Допълнителни настройки"
-		}
-	},
-	"menuOptions": {
-		"PowerSource": {
-						"text2": [
-				"Източник",
-				"захранване"
-			],
-			"desc": "Източник на захранване. Минимално напрежение. <DC 10V> <S 3.3V за клетка>"
-		},
-		"SleepTemperature": {
-						"text2": [
-				"Темп.",
-				"сън"
-			],
-			"desc": "Температура при режим \"сън\" <C>"
-		},
-		"SleepTimeout": {
-						"text2": [
-				"Време",
-				"сън"
-			],
-			"desc": "Включване в режим \"сън\" след: <Минути/Секунди>"
-		},
-		"ShutdownTimeout": {
-						"text2": [
-				"Време",
-				"изкл."
-			],
-			"desc": "Изключване след <Минути>"
-		},
-		"MotionSensitivity": {
-						"text2": [
-				"Усещане",
-				"за движение"
-			],
-			"desc": "Усещане за движение <0.Изключено 1.Слабо 9.Силно>"
-		},
-		"TemperatureUnit": {
-						"text2": [
-				"Единици за",
-				"температура"
-			],
-			"desc": "Единици за температура <C=Целзии F=Фаренхайт>"
-		},
-		"AdvancedIdle": {
-						"text2": [
-				"Детайлен",
-				"екран в покой"
-			],
-			"desc": "Покажи детайлна информация със ситен шрифт на екрана в режим на покой."
-		},
-		"DisplayRotation": {
-						"text2": [
-				"Ориентация",
-				"на дисплея"
-			],
-			"desc": "Ориентация на дисплея <A. Автоматично L. Лява Ръка R. Дясна Ръка>"
-		},
-		"BoostTemperature": {
-						"text2": [
-				"Турбо",
-				"темп."
-			],
-			"desc": "Температура за \"турбо\" режим"
-		},
-		"AutoStart": {
-						"text2": [
-				"Автоматичен",
-				"работен режим"
-			],
-			"desc": "Режим на поялника при включване на захранването. T=Работен, S=Сън, F=Изключен"
-		},
-		"CooldownBlink": {
-						"text2": [
-				"Мигай при",
-				"топъл поялник"
-			],
-			"desc": "След изключване от работен режим, индикатора за температура да мига докато човката на поялника все още е топла"
-		},
-		"TemperatureCalibration": {
-						"text2": [
-				"Калибриране",
-				"температура?"
-			],
-			"desc": "Калибриране на температурата"
-		},
-		"SettingsReset": {
-						"text2": [
-				"Фабрични",
-				"настройки?"
-			],
-			"desc": "Връщане на фабрични настройки"
-		},
-		"VoltageCalibration": {
-						"text2": [
-				"Калибриране",
-				"напрежение?"
-			],
-			"desc": "Калибриране на входното напрежение. Задръжте бутонa за изход"
-		},
-		"AdvancedSoldering": {
-						"text2": [
-				"Детайлен",
-				"работен екран"
-			],
-			"desc": "Детайлна информация в работен режим при запояване"
-		},
-		"ScrollingSpeed": {
-						"text2": [
-				"Скорост",
-				"на текста"
-			],
-			"desc": "Скорост на движение на този текст"
-		},
-		"TipModel": {
-						"text2": [
-				"Модел",
-				"на връх"
-			],
-			"desc": "Избор на модел на връх"
-		},
-		"SimpleCalibrationMode": {
-						"text2": [
-				"Бърза",
-				"калибрация"
-			],
-			"desc": "Бърза калибрация с използване на гореща вода"
-		},
-		"AdvancedCalibrationMode": {
-						"text2": [
-				"Прецизна",
-				"калибрация"
-			],
-			"desc": "Прецизна калибрация с използване на термо-двойка на върха на поялника"
-		},
-		"PowerInput": {
-						"text2": [
-				"Мощност на",
-				"захранване"
-			],
-			"desc": "Мощност на избраното захранване"
-		},
-		"PowerLimit": {
-						"text2": [
-				"Лимит на",
-				"мощност"
-			],
-			"desc": "Максимална мощност на поялника <W>"
-		},
-		"ReverseButtonTempChange": {
-						"text2": [
-				"Размяна",
-				"бутони +-?"
-			],
-			"desc": "Обръщане на бутоните \"+\" и \"-\" за промяна на температурата на върха на поялника"
-		},
-		"TempChangeShortStep": {
-						"text2": [
-				"Промяна T",
-				"бързо?"
-			],
-			"desc": "Промяна на температура при бързо натискане на бутон!"
-		},
-		"TempChangeLongStep": {
-						"text2": [
-				"Промяна Т",
-				"задържане?"
-			],
-			"desc": "Промяна на температура при задържане на бутон!"
-		},
-		"PowerPulsePower":{
-						"text2": [
-				"Захранващ",
-				"импулс"
-			],
-			"desc": "Поддържане на интензивност на захранващия импулс"
-		},
-		"TipGain": {
-						"text2": [
-				"Промяна",
-				"сила връх"
-			],
-			"desc": "Усилване на върха на поялника"
-		}
-	}
-}

Translation Editor/translation_cs.json

@@ -1,253 +0,0 @@
-{
-	"languageCode": "CS",
-	"languageLocalName": "Český",
-	"cyrillicGlyphs": false,
-	"messages": {
-		"SettingsCalibrationDone": "Kalibrace dokončena!",
-		"SettingsCalibrationWarning": "Ujistěte se, že hrot má pokojovou teplotu!",
-		"SettingsResetWarning": "Opravdu chcete resetovat zařízení do továrního nastavení?",
-		"UVLOWarningString": "Nízké DC",
-		"UndervoltageString": "! Nízké napětí !",
-		"InputVoltageString": "Napětí: ",
-		"WarningTipTempString": "Teplota: ",
-		"BadTipString": "ŠP. HROT",
-		"SleepingSimpleString": "Zzz ",
-		"SleepingAdvancedString": "Režim spánku...",
-		"WarningSimpleString": "PÁLÍ",
-		"WarningAdvancedString": "!! HORKÝ HROT !!",
-		"SleepingTipAdvancedString": "Hrot:",
-		"IdleTipString": "Hrot:",
-		"IdleSetString": " Cíl:",
-		"TipDisconnectedString": "HROT NEPŘIPOJEN",
-		"SolderingAdvancedPowerPrompt": "Ohřev: ",
-		"OffString": "Vyp",
-		"ResetOKMessage": "Reset OK",
-		"YourGainMessage": "Zisk:",
-		"SettingsResetMessage": "Tov. nas. obnov."
-	},
-	"characters": {
-		"SettingRightChar": "P",
-		"SettingLeftChar": "L",
-		"SettingAutoChar": "A",
-		"SettingFastChar": "R",
-		"SettingSlowChar": "P",
-		"SettingStartSolderingChar": "T",
-		"SettingStartSleepChar": "S",
-		"SettingStartSleepOffChar": "O",
-		"SettingStartNoneChar": "F"
-	},
-	"menuGroups": {
-		"SolderingMenu": {
-			"text2": [
-				"Pájecí",
-				"nastavení"
-			],
-			"desc": "Nastavení pájení (boost, auto start...)."
-		},
-		"PowerSavingMenu": {
-			"text2": [
-				"Režim",
-				"spánku"
-			],
-			"desc": "Nastavení režimu spánku, automatického vypnutí..."
-		},
-		"UIMenu": {
-			"text2": [
-				"Uživatelské",
-				"rozhraní"
-			],
-			"desc": "Nastavení uživatelského rozhraní."
-		},
-		"AdvancedMenu": {
-			"text2": [
-				"Pokročilé",
-				"volby"
-			],
-			"desc": "Pokročilé volby (detailní obrazovky, kalibrace, tovární nastavení...)."
-		}
-	},
-	"menuOptions": {
-		"PowerSource": {
-						"text2": [
-				"Zdroj",
-				"napájení"
-			],
-			"desc": "Při nižším napětí ukončí pájení <DC=10V, ?S=?x3.3V pro LiPo, LiIon...>."
-		},
-		"SleepTemperature": {
-						"text2": [
-				"Teplota v",
-				"r. spánku"
-			],
-			"desc": "Teplota v režimu spánku."
-		},
-		"SleepTimeout": {
-						"text2": [
-				"Čas do",
-				"r. spánku"
-			],
-			"desc": "Čas do režimu spánku <Minut/Sekund>."
-		},
-		"ShutdownTimeout": {
-						"text2": [
-				"Čas do",
-				"vypnutí"
-			],
-			"desc": "Čas do automatického vypnutí <Minut>."
-		},
-		"MotionSensitivity": {
-						"text2": [
-				"Citlivost",
-				"det. pohybu"
-			],
-			"desc": "Citlivost detekce pohybu <0=Vyp, 1=Min, ... 9=Max>."
-		},
-		"TemperatureUnit": {
-						"text2": [
-				"Jednotky",
-				"teploty"
-			],
-			"desc": "Jednotky měření teploty <C=Celsius, F=Fahrenheit>."
-		},
-		"AdvancedIdle": {
-						"text2": [
-				"Podrobnosti",
-				"na vých. obr."
-			],
-			"desc": "Zobrazit podrobnosti na výchozí obrazovce?"
-		},
-		"DisplayRotation": {
-						"text2": [
-				"Orientace",
-				"obrazovky"
-			],
-			"desc": "Orientace obrazovky <A=Auto, L=Levák, P=Pravák>."
-		},
-		"BoostTemperature": {
-						"text2": [
-				"Teplota v",
-				"r. boost"
-			],
-			"desc": "Teplota v režimu boost."
-		},
-		"AutoStart": {
-						"text2": [
-				"Automatický",
-				"start"
-			],
-			"desc": "Při startu ihned nahřát hrot?"
-		},
-		"CooldownBlink": {
-						"text2": [
-				"Blikáni při",
-				"chladnutí"
-			],
-			"desc": "Blikání teploty při chladnutí, dokud je hrot horký?"
-		},
-		"TemperatureCalibration": {
-						"text2": [
-				"Kalibrovat",
-				"teplotu?"
-			],
-			"desc": "Kalibrace měření teploty."
-		},
-		"SettingsReset": {
-						"text2": [
-				"Tovární",
-				"nastavení?"
-			],
-			"desc": "Obnovení továrního nastavení."
-		},
-		"VoltageCalibration": {
-						"text2": [
-				"Kalibrovat",
-				"vstupní napětí?"
-			],
-			"desc": "Kalibrace vstupního napětí. Tlačítky uprav, podržením potvrď."
-		},
-		"AdvancedSoldering": {
-						"text2": [
-				"Podrobnosti",
-				"při pájení"
-			],
-			"desc": "Zobrazit podrobnosti při pájení?"
-		},
-		"ScrollingSpeed": {
-						"text2": [
-				"Rychlost",
-				"popisků"
-			],
-			"desc": "Rychlost posuvu popisků podobných tomuto <P=Pomalu, R=Rychle>"
-		},
-		"TipModel": {
-			"text2": [
-				"Model",
-				"hrotu"
-			],
-			"desc": "Výběr modelu hrotu."
-		},
-		"SimpleCalibrationMode": {
-			"text2": [
-				"Jednoduchá",
-				"kalibrace"
-			],
-			"desc": "Jednoduchá kalibrace pomocí horké vody."
-		},
-		"AdvancedCalibrationMode": {
-			"text2": [
-				"Pokročilá",
-				"kalibrace"
-			],
-			"desc": "Pokročilá kalibrace pomocí termočlánku na hrotu."
-		},
-		"PowerInput": {
-			"text2": [
-				"Výkon",
-				"ve wattech"
-			],
-			"desc": "Výkon použítého napájecího adaptéru ve wattech."
-		},
-		"PowerLimit": {
-			"text2": [
-				"Omezení",
-				"Výkonu"
-			],
-			"desc": "Maximální příkon <Watty>"
-		},
-		"ReverseButtonTempChange": {
-			"text2": [
-				"Prohodit",
-				"tl. +-?"
-			],
-			"desc": "Prohodí tlačítka plus a minus pro změnu teploty hrotu."
-		},
-		"TempChangeShortStep": {
-			"text2": [
-				"Krok teploty",
-				"krátký?"
-			],
-			"desc": "Velikost skoku při změně teploty krátkým stiskem tlačítka!"
-		},
-		"TempChangeLongStep": {
-			"text2": [
-				"Krok teploty",
-				"dlouhý?"
-			],
-			"desc": "Velikost skoku při změně teploty dlouhým stiskem tlačítka!"
-		},
-		"PowerPulsePower": {
-			"text2": [
-				"Intenzita",
-				"Výkon. pulsu"
-			],
-			"desc": "Puls pro udržení zařízení v chodu (kvůli power bankám)."
-		},
-		"TipGain": {
-			"text2": [
-				"Změnit",
-				"zisk hr."
-			],
-			"desc": "Zisk hrotu (měření)"
-		}
-	}
-}

Translation Editor/translation_da.json

@@ -1,251 +0,0 @@
-{
-	"languageCode": "DA",
-	"languageLocalName": "Dansk",
-	"cyrillicGlyphs": false,
-	"messages": {
-		"SettingsCalibrationDone": "Calibration done!",
-		"SettingsCalibrationWarning": "Sørg for at loddespidsen er ved stuetemperatur, inden du fortsætter!",
-		"SettingsResetWarning": "Are you sure to reset settings to default values?",
-		"UVLOWarningString": "Lav Volt",
-		"UndervoltageString": "Undervoltage",
-		"InputVoltageString": "Input V: ",
-		"WarningTipTempString": "Tip Temp: ",
-		"BadTipString": "BAD TIP",
-		"SleepingSimpleString": "Zzzz",
-		"SleepingAdvancedString": "Dvale...",
-		"WarningSimpleString": "Varm",
-		"WarningAdvancedString": "VARM LODDESPIDS!",
-		"SleepingTipAdvancedString": "Tip:",
-		"IdleTipString": "Tip:",
-		"IdleSetString": " Set:",
-		"TipDisconnectedString": "TIP DISCONNECTED",
-		"SolderingAdvancedPowerPrompt": "Power: ",
-		"OffString": "Off",
-		"ResetOKMessage": "Reset OK"
-	},
-	"characters": {
-		"SettingRightChar": "H",
-		"SettingLeftChar": "V",
-		"SettingAutoChar": "A",
-		"SettingFastChar": "F",
-		"SettingSlowChar": "S",
-		"SettingStartSolderingChar": "L",
-		"SettingStartSleepChar": "D",
-		"SettingStartSleepOffChar": "O",
-		"SettingStartNoneChar": "S"
-	},
-	"menuGroups": {
-		"SolderingMenu": {
-			"text2": [
-				"Soldering",
-				"Settings"
-			],
-			"desc": "Soldering settings"
-		},
-		"PowerSavingMenu": {
-			"text2": [
-				"Sleep",
-				"Modes"
-			],
-			"desc": "Power Saving Settings"
-		},
-		"UIMenu": {
-			"text2": [
-				"User",
-				"Interface"
-			],
-			"desc": "User Interface settings"
-		},
-		"AdvancedMenu": {
-			"text2": [
-				"Advanced",
-				"Options"
-			],
-			"desc": "Advanced options"
-		}
-	},
-	"menuOptions": {
-		"PowerSource": {
-			"text2": [
-				"Power",
-				"source"
-			],
-			"desc": "Strømforsyning. Indstil Cutoff Spændingen. <DC 10V <S 3.3V per cell"
-		},
-		"SleepTemperature": {
-			"text2": [
-				"Sleep",
-				"temp"
-			],
-			"desc": "Dvale Temperatur <C>"
-		},
-		"SleepTimeout": {
-			"text2": [
-				"Sleep",
-				"timeout"
-			],
-			"desc": "Dvale Timeout <Minutter/Sekunder"
-		},
-		"ShutdownTimeout": {
-			"text2": [
-				"Shutdown",
-				"timeout"
-			],
-			"desc": "sluknings Timeout <Minutter"
-		},
-		"MotionSensitivity": {
-			"text2": [
-				"Motion",
-				"sensitivity"
-			],
-			"desc": "Bevægelsesfølsomhed <0.Slukket 1.Mindst følsom 9.Mest følsom"
-		},
-		"TemperatureUnit": {
-			"text2": [
-				"Temperature",
-				"unit"
-			],
-			"desc": "Temperatur Enhed <C=Celsius F=Fahrenheit"
-		},
-		"AdvancedIdle": {
-			"text2": [
-				"Detailed",
-				"idle screen"
-			],
-			"desc": "Vis detialieret information med en mindre skriftstørrelse på standby skærmen."
-		},
-		"DisplayRotation": {
-			"text2": [
-				"Display",
-				"orientation"
-			],
-			"desc": "Skærm Orientering <A. Automatisk V. Venstre Håndet H. Højre Håndet"
-		},
-		"BoostTemperature": {
-			"text2": [
-				"Boost",
-				"temp"
-			],
-			"desc": "Temperatur i \"boost\" mode"
-		},
-		"AutoStart": {
-			"text2": [
-				"Auto",
-				"start"
-			],
-			"desc": "Start automatisk med lodning når strøm sættes til. L=Lodning, D= Dvale tilstand,S=Slukket"
-		},
-		"CooldownBlink": {
-			"text2": [
-				"Cooldown",
-				"blink"
-			],
-			"desc": "Blink temperaturen på skærmen, mens spidsen stadig er varm."
-		},
-		"TemperatureCalibration": {
-			"text2": [
-				"Calibrate",
-				"temperature?"
-			],
-			"desc": "kalibrere spids temperatur."
-		},
-		"SettingsReset": {
-			"text2": [
-				"Factory",
-				"Reset?"
-			],
-			"desc": "Gendan alle indstillinger"
-		},
-		"VoltageCalibration": {
-			"text2": [
-				"Calibrate",
-				"input voltage?"
-			],
-			"desc": "VIN kalibrering. Knapperne justere, Lang tryk for at gå ud"
-		},
-		"AdvancedSoldering": {
-			"text2": [
-				"Detailed",
-				"solder screen"
-			],
-			"desc": "Vis detialieret information mens der loddes"
-		},
-		"ScrollingSpeed": {
-			"text2": [
-				"Scrolling",
-				"speed"
-			],
-			"desc": "Speed this text scrolls past at"
-		},
-		"TipModel": {
-			"text2": [
-				"Tip",
-				"Model"
-			],
-			"desc": "Tip Model selection"
-		},
-		"SimpleCalibrationMode": {
-			"text2": [
-				"Simple",
-				"Calibration"
-			],
-			"desc": "Simple Calibration using Hot water"
-		},
-		"AdvancedCalibrationMode": {
-			"text2": [
-				"Advanced",
-				"Calibration"
-			],
-			"desc": "Advanced calibration using thermocouple on the tip"
-		},
-		"PowerInput": {
-			"text2": [
-				"Power",
-				"Wattage"
-			],
-			"desc": "Power Wattage of the power adapter used"
-		},
-		"PowerLimit": {
-			"text2": [
-				"Power",
-				"Limit"
-			],
-			"desc": "Maximum power the iron can use <Watts>"
-		},
-		"ReverseButtonTempChange": {
-			"text2": [
-				"Key +-",
-				"reverse?"
-			],
-			"desc": "Reverse the tip temperature change buttons plus minus assignment."
-		},
-		"TempChangeShortStep": {
-			"text2": [
-				"Temp change",
-				"short?"
-			],
-			"desc": "Temperature change steps on short button press!"
-		},
-		"TempChangeLongStep": {
-			"text2": [
-				"Temp change",
-				"long?"
-			],
-			"desc": "Temperature change steps on long button press!"
-		},
-		"PowerPulsePower":{
-			"text2": [
-				"Power",
-				"Pulse W"
-			],
-			"desc": "Keep awake pulse power intensity"
-		},
-		"TipGain": {
-			"text2": [
-				"Modify",
-				"tip gain"
-			],
-			"desc": "Tip gain"
-		}
-	}
-}

Translation Editor/translation_de.json

@@ -1,255 +0,0 @@
-{
-	"languageCode": "DE",
-	"languageLocalName": "Deutsch",
-	"cyrillicGlyphs": false,
-	"tempUnitFahrenheit": false,
-	"messages": {
-		"SettingsCalibrationDone": "Kalibrierung abgeschlossen!",
-		"SettingsCalibrationWarning": "Vor dem Fortfahren muss die Lötspitze vollständig abgekühlt sein!",
-		"SettingsResetWarning": "Sind Sie sicher, dass Sie alle Werte zurücksetzen wollen?",
-		"UVLOWarningString": "V niedr.",
-		"UndervoltageString": "Unterspannung",
-		"InputVoltageString": "V Eingang: ",
-		"WarningTipTempString": "Temperatur: ",
-		"BadTipString": "Spitze Defekt",
-		"SleepingSimpleString": "Zzz ",
-		"SleepingAdvancedString": "Ruhemodus...",
-		"WarningSimpleString": "HEIß",
-		"WarningAdvancedString": "! Achtung Heiß !",
-		"SleepingTipAdvancedString": "Temp:",
-		"IdleTipString": "Ist:",
-		"IdleSetString": " Soll:",
-		"TipDisconnectedString": "Spitze fehlt",
-		"SolderingAdvancedPowerPrompt": "Leistung: ",
-		"OffString": "Aus",
-		"ResetOKMessage": "Reset OK",
-		"YourGainMessage": "Your Gain:",
-		"SettingsResetMessage": "Einstellungen\nzurück gesetzt!"
-	},
-	"characters": {
-		"SettingRightChar": "R",
-		"SettingLeftChar": "L",
-		"SettingAutoChar": "A",
-		"SettingFastChar": "F",
-		"SettingSlowChar": "S",
-		"SettingStartSolderingChar": "T",
-		"SettingStartSleepChar": "S",
-		"SettingStartSleepOffChar": "O",
-		"SettingStartNoneChar": "F"
-	},
-	"menuGroups": {
-		"SolderingMenu": {
-			"text2": [
-				"Löt-",
-				"einstellungen"
-			],
-			"desc": "Löteinstellungen"
-		},
-		"PowerSavingMenu": {
-			"text2": [
-				"Schlaf-",
-				"modus"
-			],
-			"desc": "Energiespareinstellungen"
-		},
-		"UIMenu": {
-			"text2": [
-				"Anzeige-",
-				"einstellungen"
-			],
-			"desc": "Menüeinstellungen"
-		},
-		"AdvancedMenu": {
-			"text2": [
-				"Erweiterte",
-				"Optionen"
-			],
-			"desc": "Erweiterte Einstellungen"
-		}
-	},
-	"menuOptions": {
-		"PowerSource": {
-						"text2": [
-				"Spannungs-",
-				"quelle"
-			],
-			"desc": "Spannungsquelle (Abschaltspannung) <DC=10V, nS=n*3.3V für n LiIon-Zellen>"
-		},
-		"SleepTemperature": {
-						"text2": [
-				"Ruhetemp-",
-				"eratur"
-			],
-			"desc": "Ruhetemperatur"
-		},
-		"SleepTimeout": {
-						"text2": [
-				"Ruhever-",
-				"zögerung"
-			],
-			"desc": "Ruhemodus nach <Sekunden/Minuten>"
-		},
-		"ShutdownTimeout": {
-						"text2": [
-				"Abschalt-",
-				"zeit"
-			],
-			"desc": "Abschalten nach <Minuten>"
-		},
-		"MotionSensitivity": {
-						"text2": [
-				"Bewegungs-",
-				"empfindlichk."
-			],
-			"desc": "Bewegungsempfindlichkeit <0=Aus, 1=Minimal ... 9=Maximal>"
-		},
-		"TemperatureUnit": {
-						"text2": [
-				"Temperatur-",
-				"einheit"
-			],
-			"desc": "Temperatureinheit <C=Celsius, F=Fahrenheit>"
-		},
-		"AdvancedIdle": {
-						"text2": [
-				"Detaillierte",
-				"Ruheansicht"
-			],
-			"desc": "Detaillierte Anzeige im Ruhemodus"
-		},
-		"DisplayRotation": {
-						"text2": [
-				"Anzeige-",
-				"ausrichtung"
-			],
-			"desc": "Ausrichtung der Anzeige <A=Automatisch, L=Linkshändig, R=Rechtshändig>"
-		},
-		"BoostTemperature": {
-						"text2": [
-				"Boosttemp-",
-				"eratur"
-			],
-			"desc": "Temperatur im Boostmodus  (In der eingestellten Einheit)"
-		},
-		"AutoStart": {
-						"text2": [
-				"Start im",
-				"Lötmodus?"
-			],
-			"desc": "Automatischer Start-Modus beim Einschalten der Spannungsversorgung. <T=Lötmodus S=Ruhezustand F=Aus>"
-		},
-		"CooldownBlink": {
-						"text2": [
-				"Abkühl-",
-				"blinken?"
-			],
-			"desc": "Blinkende Temperaturanzeige beim Abkühlen, solange heiß ist."
-		},
-		"TemperatureCalibration": {
-						"text2": [
-				"Temperatur",
-				"kalibrieren?"
-			],
-			"desc": "Kalibrierung der Lötspitzentemperatur"
-		},
-		"SettingsReset": {
-						"text2": [
-				"Einstellungen",
-				"zurücksetzen?"
-			],
-			"desc": "Einstellungen auf werkseinstellungen zurück setzen"
-		},
-		"VoltageCalibration": {
-						"text2": [
-				"Eingangsspannung",
-				"kalibrieren?"
-			],
-			"desc": "Kalibrierung der Eingangsspannung. Kurzer Tastendruck zum Einstellen, langer Tastendruck zum Verlassen."
-		},
-		"AdvancedSoldering": {
-						"text2": [
-				"Detaillierte",
-				"Lötansicht"
-			],
-			"desc": "Detaillierte Anzeige im Lötmodus"
-		},
-		"ScrollingSpeed": {
-						"text2": [
-				"Scroll-",
-				"geschw."
-			],
-			"desc": "Scrollgeschwindigkeit der Texte <S=Langsam F=Schnell>"
-		},
-		"TipModel": {
-						"text2": [
-				"Löt-",
-				"spitze"
-			],
-			"desc": "Auswahl der Lötspitze"
-		},
-		"SimpleCalibrationMode": {
-						"text2": [
-				"Einfache",
-				"Kalibrierung"
-			],
-			"desc": "Einfache Kalibrierung mittels heißem Wasser"
-		},
-		"AdvancedCalibrationMode": {
-						"text2": [
-				"Erweiterte",
-				"Kalibrierung"
-			],
-			"desc": "Erweiterte Kalibrierung mittels eines Thermoelements an der Lötspitze"
-		},
-		"PowerInput": {
-						"text2": [
-				"Leistungs-",
-				"Aufnahme"
-			],
-			"desc": "Leistungsaufnahme der verwendeten Spannungsversorgung"
-		},
-		"PowerLimit": {
-						"text2": [
-				"Leistungs-",
-				"Limit"
-			],
-			"desc": "Maximale aufnahme der Lötspitze <Watt>"
-		},
-		"ReverseButtonTempChange": {
-						"text2": [
-				"Taste +-",
-				"Umkehren?"
-			],
-			"desc": "Temperatur-Änderungs-Tasten-Belegung Plus-Minus umkehren?"
-		},
-		"TempChangeShortStep": {
-						"text2": [
-				"T. Schritt",
-				"Taste kurz?"
-			],
-			"desc": "Temperaturwechselschritte bei kurzem Tastendruck!"
-		}
-		,
-		"TempChangeLongStep": {
-						"text2": [
-				"T. Schritt",
-				"Taste Lang?"
-			],
-			"desc": "Temperaturwechselschritte bei langem Tastendruck!"
-		},
-		"PowerPulsePower":{
-						"text2": [
-				"Power",
-				"Pulse W"
-			],
-			"desc": "Keep awake pulse power intensity"
-		},
-		"TipGain": {
-						"text2": [
-				"Modify",
-				"tip gain"
-			],
-			"desc": "Tip gain"
-		}
-	}
-}

Translation Editor/translation_en.json

@@ -1,254 +0,0 @@
-{
-	"languageCode": "EN",
-	"languageLocalName": "English",
-	"cyrillicGlyphs": false,
-	"tempUnitFahrenheit": true,
-	"messages": {
-		"SettingsCalibrationDone": "Calibration done!",
-		"SettingsCalibrationWarning": "Please ensure the tip is at room temperature, before continuing!",
-		"SettingsResetWarning": "Are you sure you want to reset settings to default values?",
-		"UVLOWarningString": "DC LOW",
-		"UndervoltageString": "Undervoltage",
-		"InputVoltageString": "Input V: ",
-		"WarningTipTempString": "Tip temp: ",
-		"BadTipString": "BAD TIP",
-		"SleepingSimpleString": "Zzzz",
-		"SleepingAdvancedString": "Sleeping...",
-		"WarningSimpleString": "HOT!",
-		"WarningAdvancedString": "!!! TIP HOT !!!",
-		"SleepingTipAdvancedString": "Tip:",
-		"IdleTipString": "Tip:",
-		"IdleSetString": " Set:",
-		"TipDisconnectedString": "TIP DISCONNECTED",
-		"SolderingAdvancedPowerPrompt": "Power: ",
-		"OffString": "Off",
-		"ResetOKMessage": "Reset OK",
-		"YourGainMessage": "Your gain:",
-		"SettingsResetMessage": "Settings were\nreset!"
-	},
-	"characters": {
-		"SettingRightChar": "R",
-		"SettingLeftChar": "L",
-		"SettingAutoChar": "A",
-		"SettingFastChar": "F",
-		"SettingSlowChar": "S",
-		"SettingStartSolderingChar": "T",
-		"SettingStartSleepChar": "S",
-		"SettingStartSleepOffChar": "O",
-		"SettingStartNoneChar": "F"
-	},
-	"menuGroups": {
-		"SolderingMenu": {
-			"text2": [
-				"Soldering",
-				"settings"
-			],
-			"desc": "Soldering settings"
-		},
-		"PowerSavingMenu": {
-			"text2": [
-				"Sleep",
-				"modes"
-			],
-			"desc": "Power saving settings"
-		},
-		"UIMenu": {
-			"text2": [
-				"User",
-				"interface"
-			],
-			"desc": "User interface settings"
-		},
-		"AdvancedMenu": {
-			"text2": [
-				"Advanced",
-				"options"
-			],
-			"desc": "Advanced options"
-		}
-	},
-	"menuOptions": {
-		"PowerSource": {
-						"text2": [
-				"Power",
-				"source"
-			],
-			"desc": "Power source. Sets cutoff voltage. <DC 10V> <S 3.3V per cell, disable power limit>"
-		},
-		"SleepTemperature": {
-						"text2": [
-				"Sleep",
-				"temp"
-			],
-			"desc": "Sleep temperature"
-		},
-		"SleepTimeout": {
-						"text2": [
-				"Sleep",
-				"timeout"
-			],
-			"desc": "Sleep timeout <Minutes/Seconds>"
-		},
-		"ShutdownTimeout": {
-						"text2": [
-				"Shutdown",
-				"timeout"
-			],
-			"desc": "Shutdown timeout <Minutes>"
-		},
-		"MotionSensitivity": {
-						"text2": [
-				"Motion",
-				"sensitivity"
-			],
-			"desc": "Motion sensitivity <0=Off 1=Least sensitive 9=Most sensitive>"
-		},
-		"TemperatureUnit": {
-						"text2": [
-				"Temperature",
-				"unit"
-			],
-			"desc": "Temperature unit <C=Celsius F=Fahrenheit>"
-		},
-		"AdvancedIdle": {
-						"text2": [
-				"Detailed",
-				"idle screen"
-			],
-			"desc": "Display detailed information in a smaller font on the idle screen"
-		},
-		"DisplayRotation": {
-						"text2": [
-				"Display",
-				"orientation"
-			],
-			"desc": "Display orientation <A=Automatic L=Left-handed R=Right-handed>"
-		},
-		"BoostTemperature": {
-						"text2": [
-				"Boost",
-				"temp"
-			],
-			"desc": "Temperature when in \"boost mode\""
-		},
-		"AutoStart": {
-						"text2": [
-				"Auto",
-				"start"
-			],
-			"desc": "Automatically starts the iron into soldering on power up <F=Off T=Soldering S=Sleep O=Sleep at room temperature>"
-		},
-		"CooldownBlink": {
-						"text2": [
-				"Cooldown",
-				"blink"
-			],
-			"desc": "Blink the temperature on the cooling screen while the tip is still hot"
-		},
-		"TemperatureCalibration": {
-						"text2": [
-				"Calibrate",
-				"temperature?"
-			],
-			"desc": "Calibrate tip offset?"
-		},
-		"SettingsReset": {
-						"text2": [
-				"Factory",
-				"Reset?"
-			],
-			"desc": "Reset all settings!"
-		},
-		"VoltageCalibration": {
-						"text2": [
-				"Calibrate",
-				"input voltage?"
-			],
-			"desc": "VIN Calibration <long press to exit>"
-		},
-		"AdvancedSoldering": {
-						"text2": [
-				"Detailed",
-				"solder screen"
-			],
-			"desc": "Display detailed information while soldering"
-		},
-		"ScrollingSpeed": {
-						"text2": [
-				"Scrolling",
-				"speed"
-			],
-			"desc": "Speed this text scrolls past at <S=Slow F=Fast>"
-		},
-		"TipModel": {
-						"text2": [
-				"Tip",
-				"model"
-			],
-			"desc": "Tip model selection"
-		},
-		"SimpleCalibrationMode": {
-						"text2": [
-				"Simple",
-				"calibration"
-			],
-			"desc": "Simple calibration using hot water"
-		},
-		"AdvancedCalibrationMode": {
-						"text2": [
-				"Advanced",
-				"calibration"
-			],
-			"desc": "Advanced calibration using thermocouple on the tip"
-		},
-		"PowerInput": {
-						"text2": [
-				"Power",
-				"wattage"
-			],
-			"desc": "Power wattage of the power adapter used"
-		},
-		"PowerLimit": {
-						"text2": [
-				"Power",
-				"limit"
-			],
-			"desc": "Maximum power the iron can use <Watts>"
-		},
-		"ReverseButtonTempChange": {
-						"text2": [
-				"Reverse",
-				"+ - keys"
-			],
-			"desc": "Reverse assignment of temperature adjustment buttons"
-		},
-		"TempChangeShortStep": {
-						"text2": [
-				"Temp change",
-				"short"
-			],
-			"desc": "Temperature change steps on short button press"
-		},
-		"TempChangeLongStep": {
-						"text2": [
-				"Temp change",
-				"long"
-			],
-			"desc": "Temperature change steps on long button press"
-		},
-		"PowerPulsePower":{
-						"text2": [
-				"Power",
-				"Pulse W"
-			],
-			"desc": "Keep awake pulse power intensity"
-		},
-		"TipGain": {
-						"text2": [
-				"Modify",
-				"tip gain"
-			],
-			"desc": "Tip gain"
-		}
-	}
-}

Translation Editor/translation_es.json

@@ -1,253 +0,0 @@
-{
-	"languageCode": "ES",
-	"languageLocalName": "Castellano",
-	"cyrillicGlyphs": false,
-	"messages": {
-		"SettingsCalibrationDone": "¡Calibrada!",
-		"SettingsCalibrationWarning": "¡Asegúrate que la punta esté a temperatura ambiente antes de empezar!",
-		"SettingsResetWarning": "¿Quieres restablecer los ajustes?",
-		"UVLOWarningString": "CC BAJA",
-		"UndervoltageString": "Voltaje bajo",
-		"InputVoltageString": "Voltaje: ",
-		"WarningTipTempString": "Temp punta: ",
-		"BadTipString": "PT. ROTA",
-		"SleepingSimpleString": "Zzzz",
-		"SleepingAdvancedString": "En reposo...",
-		"WarningSimpleString": "QUEMA",
-		"WarningAdvancedString": "¡LA PUNTA QUEMA!",
-		"SleepingTipAdvancedString": "Punta:",
-		"IdleTipString": "Punta:",
-		"IdleSetString": " Aj:",
-		"TipDisconnectedString": "NO HAY PUNTA",
-		"SolderingAdvancedPowerPrompt": "Potencia: ",
-		"OffString": " No",
-		"ResetOKMessage": "Hecho.       ",
-		"YourGainMessage": "Gananc.:",
-		"SettingsResetMessage": "Ajustes borrados"
-	},
-	"characters": {
-		"SettingRightChar": "D",
-		"SettingLeftChar": "I",
-		"SettingAutoChar": "A",
-		"SettingFastChar": "R",
-		"SettingSlowChar": "L",
-		"SettingStartSolderingChar": "S",
-		"SettingStartSleepChar": "R",
-		"SettingStartSleepOffChar": "F",
-		"SettingStartNoneChar": "N"
-	},
-	"menuGroups": {
-		"SolderingMenu": {
-			"text2": [
-				"Ajustes de",
-				"soldadura"
-			],
-			"desc": "Ajustes para soldar."
-		},
-		"PowerSavingMenu": {
-			"text2": [
-				"Modos de",
-				"reposo"
-			],
-			"desc": "Ajustes de ahorro energético."
-		},
-		"UIMenu": {
-			"text2": [
-				"Interfaz",
-				"de usuario"
-			],
-			"desc": "Ajustes de interfaz de usuario."
-		},
-		"AdvancedMenu": {
-			"text2": [
-				"Ajustes",
-				"avanzados"
-			],
-			"desc": "Ajustes avanzados."
-		}
-	},
-	"menuOptions": {
-		"PowerSource": {
-						"text2": [
-				"Fuente",
-				"de energía"
-			],
-			"desc": "Elige el tipo de fuente para limitar el voltaje <DC 10V> <S 3,3V por pila, ilimitado>"
-		},
-		"SleepTemperature": {
-						"text2": [
-				"Temperatura",
-				"en reposo"
-			],
-			"desc": "Temperatura de la punta en reposo."
-		},
-		"SleepTimeout": {
-						"text2": [
-				"Entrar",
-				"en reposo"
-			],
-			"desc": "Tiempo de inactividad para entrar en reposo <min/seg>"
-		},
-		"ShutdownTimeout": {
-						"text2": [
-				"Tiempo de",
-				"apagado"
-			],
-			"desc": "Tiempo de inactividad para apagarse <en minutos>"
-		},
-		"MotionSensitivity": {
-						"text2": [
-				"Detección de",
-				"movimiento"
-			],
-			"desc": "Tiempo de reacción al agarrar <0=no 1=menos sensible 9=más sensible>"
-		},
-		"TemperatureUnit": {
-						"text2": [
-				"Unidad de",
-				"temperatura"
-			],
-			"desc": "Unidad de temperatura <C=centígrados F=Fahrenheit>"
-		},
-		"AdvancedIdle": {
-						"text2": [
-				"Info extra en",
-				"modo reposo"
-			],
-			"desc": "Muestra información detallada en letra pequeña al reposar."
-		},
-		"DisplayRotation": {
-						"text2": [
-				"Orientación",
-				"de pantalla"
-			],
-			"desc": "Orientación de la pantalla <A=automático I=zurdo D=diestro>"
-		},
-		"BoostTemperature": {
-						"text2": [
-				"Ajustar la",
-				"temp. extra"
-			],
-			"desc": "Temperatura momentánea que se alcanza al apretar el botón del modo extra."
-		},
-		"AutoStart": {
-						"text2": [
-				"Calentar",
-				"al enchufar"
-			],
-			"desc": "Se calienta él solo al arrancar <S=entrar en modo soldar R=solo entrar en reposo F=en reposo pero mantiene la punta fría N=no>"
-		},
-		"CooldownBlink": {
-						"text2": [
-				"Parpadear",
-				"al enfriar"
-			],
-			"desc": "La temperatura en pantalla parpadea mientras la punta siga caliente."
-		},
-		"TemperatureCalibration": {
-						"text2": [
-				"Calibrar temp.",
-				"de la punta"
-			],
-			"desc": "Calibra la desviación térmica de la punta."
-		},
-		"SettingsReset": {
-						"text2": [
-				"Volver a ajustes",
-				"de fábrica"
-			],
-			"desc": "Restablece todos los ajustes a los valores originales."
-		},
-		"VoltageCalibration": {
-						"text2": [
-				"Calibrar voltaje",
-				"de entrada"
-			],
-			"desc": "Calibra VIN. Ajusta con ambos botones y mantén pulsado para salir."
-		},
-		"AdvancedSoldering": {
-						"text2": [
-				"Info extra",
-				"al soldar"
-			],
-			"desc": "Muestra más datos por pantalla cuando se está soldando."
-		},
-		"ScrollingSpeed": {
-						"text2": [
-				"Velocidad",
-				"del texto"
-			],
-			"desc": "Velocidad de desplazamiento del texto <R=rápida L=lenta>"
-		},
-		"TipModel": {
-						"text2": [
-				"Modelo de",
-				"punta"
-			],
-			"desc": "Elegir el modelo de punta actual."
-		},
-		"SimpleCalibrationMode": {
-						"text2": [
-				"Calibración",
-				"simple"
-			],
-			"desc": "Calibración simple con agua caliente."
-		},
-		"AdvancedCalibrationMode": {
-						"text2": [
-				"Calibración",
-				"avanzada"
-			],
-			"desc": "Calibrar con un termopar en la punta; más difícil."
-		},
-		"PowerInput": {
-						"text2": [
-				"Potencia de",
-				"entrada"
-			],
-			"desc": "Potencia en vatios del adaptador de corriente utilizado."
-		},
-		"PowerLimit": {
-						"text2": [
-				"Ajustar la",
-				"potenc. máx."
-			],
-			"desc": "Elige el límite de potencia máxima del soldador <en vatios>"
-		},
-		"ReverseButtonTempChange": {
-						"text2": [
-				"Invertir",
-				"botones +/-"
-			],
-			"desc": "Intercambia las funciones de subir y bajar la temperatura de los botones +/- para que funcionen al revés."
-		},
-		"TempChangeShortStep": {
-						"text2": [
-				"Cambio temp.",
-				"puls. cortas"
-			],
-			"desc": "Subir y bajar X grados de temperatura con cada pulsación corta de los botones +/-."
-		},
-		"TempChangeLongStep": {
-						"text2": [
-				"Cambio temp.",
-				"puls. largas"
-			],
-			"desc": "Subir y bajar X grados de temperatura con cada pulsación larga de los botones +/-."
-		},
-		"PowerPulsePower": {
-						"text2": [
-				"Pulsos bat.",
-				"constantes"
-			],
-			"desc": "Aplica unos pulsos necesarios para mantener encendidas ciertas baterías portátiles. En vatios."
-		},
-		"TipGain": {
-						"text2": [
-				"Ajustar ganancia",
-				"de punta"
-			],
-			"desc": "Modificar el valor de ganancia de la punta."
-		}
-	}
-}

Translation Editor/translation_fi.json

@@ -1,251 +0,0 @@
-{
-	"languageCode": "FI",
-	"languageLocalName": "Suomi",
-	"cyrillicGlyphs": false,
-	"messages": {
-		"SettingsCalibrationDone": "Calibration done!",
-		"SettingsCalibrationWarning": "Varmista että kärki on huoneenlämpöinen ennen jatkamista!",
-		"SettingsResetWarning": "Haluatko varmasti palauttaa oletusarvot?",
-		"UVLOWarningString": "DC LOW",
-		"UndervoltageString": "Alijännite",
-		"InputVoltageString": "Jännite: ",
-		"WarningTipTempString": "Lämpötila: ",
-		"BadTipString": "VIKATILA",
-		"SleepingSimpleString": "Zzzz",
-		"SleepingAdvancedString": "Lepotila...",
-		"WarningSimpleString": "HOT",
-		"WarningAdvancedString": "! KÄRKI KUUMA !",
-		"SleepingTipAdvancedString": "Kärki:",
-		"IdleTipString": "Kärki:",
-		"IdleSetString": " Asetus:",
-		"TipDisconnectedString": "KÄRKI ON IRTI",
-		"SolderingAdvancedPowerPrompt": "Teho: ",
-		"OffString": "OFF",
-		"ResetOKMessage": "Reset OK"
-	},
-	"characters": {
-		"SettingRightChar": "O",
-		"SettingLeftChar": "V",
-		"SettingAutoChar": "A",
-		"SettingFastChar": "N",
-		"SettingSlowChar": "H",
-		"SettingStartSolderingChar": "T",
-		"SettingStartSleepChar": "S",
-		"SettingStartSleepOffChar": "O",
-		"SettingStartNoneChar": "F"
-	},
-	"menuGroups": {
-		"SolderingMenu": {
-			"text2": [
-				"Juotos-",
-				"asetukset"
-			],
-			"desc": "Juotosasetukset"
-		},
-		"PowerSavingMenu": {
-			"text2": [
-				"Lepotilan",
-				"asetukset"
-			],
-			"desc": "Virransäästöasetukset"
-		},
-		"UIMenu": {
-			"text2": [
-				"Käyttö-",
-				"liittymä"
-			],
-			"desc": "Käyttöliittymän asetukset"
-		},
-		"AdvancedMenu": {
-			"text2": [
-				"Lisä-",
-				"asetukset"
-			],
-			"desc": "Lisäasetukset"
-		}
-	},
-	"menuOptions": {
-		"PowerSource": {
-						"text2": [
-				"Virtalähde",
-				"DC"
-			],
-			"desc": "Käytettävä virtalähde. Asettaa katkaisujänniteen. <DC 10V, 3S=9.9V, 4S=13.2V, 5S=16.5V, 6S=19.8V>"
-		},
-		"SleepTemperature": {
-						"text2": [
-				"Lepotilan",
-				"lämpötila"
-			],
-			"desc": "Lepotilan lämpötila. <C>"
-		},
-		"SleepTimeout": {
-						"text2": [
-				"Lepotilan",
-				"viive"
-			],
-			"desc": "Lepotilan viive. <minuuttia/sekuntia>"
-		},
-		"ShutdownTimeout": {
-						"text2": [
-				"Sammutus",
-				"viive"
-			],
-			"desc": "Automaattisen sammutuksen aikaviive. <minuuttia>"
-		},
-		"MotionSensitivity": {
-						"text2": [
-				"Liikkeen",
-				"herkkyys"
-			],
-			"desc": "Liikkeentunnistuksen herkkyys. <0=pois, 1=epäherkin, 9=herkin>"
-		},
-		"TemperatureUnit": {
-						"text2": [
-				"Lämpötilan",
-				"yksikkö"
-			],
-			"desc": "Lämpötilan yksikkö. <C=celsius, F=fahrenheit>"
-		},
-		"AdvancedIdle": {
-						"text2": [
-				"Tiedot",
-				"lepotilassa"
-			],
-			"desc": "Näyttää yksityiskohtaisemmat tiedot lepotilassa."
-		},
-		"DisplayRotation": {
-						"text2": [
-				"Näytön",
-				"kierto"
-			],
-			"desc": "Näytön kierto. <A=automaattinen O=oikeakätinen V=vasenkätinen>"
-		},
-		"BoostTemperature": {
-						"text2": [
-				"Tehostus-",
-				"lämpötila"
-			],
-			"desc": "Tehostustilan lämpötila"
-		},
-		"AutoStart": {
-						"text2": [
-				"Autom.",
-				"käynnistys"
-			],
-			"desc": "Käynnistää virrat kytkettäessä juotostilan automaattisesti. T=juotostila, S=Lepotila, F=Ei käytössä"
-		},
-		"CooldownBlink": {
-						"text2": [
-				"Jäähdytyksen",
-				"vilkutus"
-			],
-			"desc": "Vilkuttaa jäähtyessä juotoskärjen lämpötilaa sen ollessa vielä vaarallisen kuuma."
-		},
-		"TemperatureCalibration": {
-						"text2": [
-				"Kalibroi",
-				"lämpötila?"
-			],
-			"desc": "Kalibroi kärjen lämpötilaeron."
-		},
-		"SettingsReset": {
-						"text2": [
-				"Palauta",
-				"tehdasasetukset?"
-			],
-			"desc": "Palauta kaikki asetukset oletusarvoihin."
-		},
-		"VoltageCalibration": {
-						"text2": [
-				"Kalibroi",
-				"tulojännite?"
-			],
-			"desc": "Tulojännitten kalibrointi (VIN). Painikkeilla säädetään ja pitkään painamalla poistutaan."
-		},
-		"AdvancedSoldering": {
-						"text2": [
-				"Tarkempi",
-				"juotosnäyttö"
-			],
-			"desc": "Näyttää yksityiskohtaisemmat tiedot juotostilassa."
-		},
-		"ScrollingSpeed": {
-						"text2": [
-				"Tietojen",
-				"näyttönopeus"
-			],
-			"desc": "Näiden selitetekstien vieritysnopeus."
-		},
-		"TipModel": {
-						"text2": [
-				"Tip",
-				"Model"
-			],
-			"desc": "Tip Model selection"
-		},
-		"SimpleCalibrationMode": {
-						"text2": [
-				"Simple",
-				"Calibration"
-			],
-			"desc": "Simple Calibration using Hot water"
-		},
-		"AdvancedCalibrationMode": {
-						"text2": [
-				"Advanced",
-				"Calibration"
-			],
-			"desc": "Advanced calibration using thermocouple on the tip"
-		},
-		"PowerInput": {
-						"text2": [
-				"Power",
-				"Wattage"
-			],
-			"desc": "Power Wattage of the power adapter used"
-		},
-		"PowerLimit": {
-						"text2": [
-				"Power",
-				"Limit"
-			],
-			"desc": "Maximum power the iron can use <Watts>"
-		},
-		"ReverseButtonTempChange": {
-						"text2": [
-				"Key +-",
-				"reverse?"
-			],
-			"desc": "Reverse the tip temperature change buttons plus minus assignment."
-		},
-		"TempChangeShortStep": {
-						"text2": [
-				"Temp change",
-				"short?"
-			],
-			"desc": "Temperature change steps on short button press!"
-		},
-		"TempChangeLongStep": {
-						"text2": [
-				"Temp change",
-				"long?"
-			],
-			"desc": "Temperature change steps on long button press!"
-		},
-		"PowerPulsePower":{
-						"text2": [
-				"Power",
-				"Pulse W"
-			],
-			"desc": "Keep awake pulse power intensity"
-		},
-		"TipGain": {
-						"text2": [
-				"Modify",
-				"tip gain"
-			],
-			"desc": "Tip gain"
-		}
-	}
-}

Translation Editor/translation_fr.json

@@ -1,251 +0,0 @@
-{
-	"languageCode": "FR",
-	"languageLocalName": "Français",
-	"cyrillicGlyphs": false,
-	"messages": {
-		"SettingsCalibrationDone": "Calibration effectuée!",
-		"SettingsCalibrationWarning": "Assurez-vous que la panne soit à température ambiante avant de continuer!",
-		"SettingsResetWarning": "Voulez-vous vraiment réinitialiser les paramètres aux valeurs d'usine?",
-		"UVLOWarningString": "DC FAIBL",
-		"UndervoltageString": "Sous-tension",
-		"InputVoltageString": "V d'entrée:",
-		"WarningTipTempString": "Temp. Panne:",
-		"BadTipString": "PANNE HS",
-		"SleepingSimpleString": "Zzzz",
-		"SleepingAdvancedString": "En veille...",
-		"WarningSimpleString": "CHAUD!",
-		"WarningAdvancedString": "ATTENTION! CHAUD!",
-		"SleepingTipAdvancedString": "Panne:",
-		"IdleTipString": "Tip:",
-		"IdleSetString": " Set:",
-		"TipDisconnectedString": "PANNE DÉBRANCHÉE",
-		"SolderingAdvancedPowerPrompt": "Puissance: ",
-		"OffString": "Off",
-		"ResetOKMessage": "Reset OK"
-	},
-	"characters": {
-		"SettingRightChar": "D",
-		"SettingLeftChar": "G",
-		"SettingAutoChar": "A",
-		"SettingFastChar": "R",
-		"SettingSlowChar": "L",
-		"SettingStartSolderingChar": "A",
-		"SettingStartSleepChar": "V",
-		"SettingStartSleepOffChar": "O",
-		"SettingStartNoneChar": "D"
-	},
-	"menuGroups": {
-		"SolderingMenu": {
-			"text2": [
-				"Paramètres",
-				"de soudure"
-			],
-			"desc": "Paramètres de soudure"
-		},
-		"PowerSavingMenu": {
-			"text2": [
-				"Mode",
-				"veille"
-			],
-			"desc": "Paramètres d'économie d'énergie"
-		},
-		"UIMenu": {
-			"text2": [
-				"Interface",
-				"utilisateur"
-			],
-			"desc": "Paramètres de l'interface utilisateur"
-		},
-		"AdvancedMenu": {
-			"text2": [
-				"Options",
-				"avancées"
-			],
-			"desc": "Options avancées"
-		}
-	},
-	"menuOptions": {
-		"PowerSource": {
-						"text2": [
-				"Source",
-				"d'alim"
-			],
-			"desc": "Source d'alimentation. Règle la tension de coupure <DC=10V S=3.3V par cellules>"
-		},
-		"SleepTemperature": {
-						"text2": [
-				"Temp.",
-				"veille"
-			],
-			"desc": "Température en veille <C>"
-		},
-		"SleepTimeout": {
-						"text2": [
-				"Délai",
-				"veille"
-			],
-			"desc": "Délai avant mise en veille <Minutes>"
-		},
-		"ShutdownTimeout": {
-						"text2": [
-				"Délai",
-				"extinction"
-			],
-			"desc": "Délai avant extinction <Minutes>"
-		},
-		"MotionSensitivity": {
-						"text2": [
-				"Sensibilité",
-				"au mouvement"
-			],
-			"desc": "Sensibilité du capteur de mouvement <0=Inactif 1=Peu sensible 9=Tres sensible>"
-		},
-		"TemperatureUnit": {
-						"text2": [
-				"Unité de",
-				"température"
-			],
-			"desc": "Unité de température <C=Celsius F=Fahrenheit>"
-		},
-		"AdvancedIdle": {
-						"text2": [
-				"Écran veille",
-				"détaillé"
-			],
-			"desc": "Afficher des informations détaillées lors de la veille."
-		},
-		"DisplayRotation": {
-						"text2": [
-				"Orientation",
-				"de l'écran"
-			],
-			"desc": "Orientation de l'affichage <A=Automatique G=Gaucher D=Droitier>"
-		},
-		"BoostTemperature": {
-						"text2": [
-				"Temp.",
-				"Boost"
-			],
-			"desc": "Température du mode \"Boost\""
-		},
-		"AutoStart": {
-						"text2": [
-				"Démarrage",
-				"automatique"
-			],
-			"desc": "Démarrer automatiquement la soudure a l'allumage <A=Activé, V=Mode Veille, D=Désactivé>"
-		},
-		"CooldownBlink": {
-						"text2": [
-				"Refroidir en",
-				"clignotant"
-			],
-			"desc": "Faire clignoter la température lors du refroidissement tant que la panne est chaude."
-		},
-		"TemperatureCalibration": {
-						"text2": [
-				"Étalonner",
-				"température"
-			],
-			"desc": "Étalonner température de la panne."
-		},
-		"SettingsReset": {
-						"text2": [
-				"Réinitialisation",
-				"d'usine"
-			],
-			"desc": "Réinitialiser tous les réglages"
-		},
-		"VoltageCalibration": {
-						"text2": [
-				"Étalonner",
-				"tension d'entrée"
-			],
-			"desc": "Étalonner tension d'entrée. Boutons pour ajuster, appui long pour quitter"
-		},
-		"AdvancedSoldering": {
-						"text2": [
-				"Écran soudure",
-				"détaillé"
-			],
-			"desc": "Afficher des informations détaillées pendant la soudure"
-		},
-		"ScrollingSpeed": {
-						"text2": [
-				"Vitesse de",
-				"défilement"
-			],
-			"desc": "Vitesse de défilement de ce texte en <R=Rapide L=Lent>"
-		},
-		"TipModel": {
-						"text2": [
-				"Panne",
-				"Modèle"
-			],
-			"desc": "Sélection du modèle de la panne"
-		},
-		"SimpleCalibrationMode": {
-						"text2": [
-				"Calibration",
-				"simple"
-			],
-			"desc": "Calibration simple à l'aide d'eau chaude"
-		},
-		"AdvancedCalibrationMode": {
-						"text2": [
-				"Calibration",
-				"avancées"
-			],
-			"desc": "Calibration avancées à l'aide d'un thermocouple sur la panne"
-		},
-		"PowerInput": {
-						"text2": [
-				"Puissance de",
-				"l'alimentation"
-			],
-			"desc": "Puissance de l'alimentation utilisée"
-		},
-		"PowerLimit": {
-						"text2": [
-				"Puissance",
-				"Limite"
-			],
-			"desc": "Puissance maximale utilisable <Watts>"
-		},
-		"ReverseButtonTempChange": {
-						"text2": [
-				"Key +-",
-				"Inverser?"
-			],
-			"desc": "Inversez l'assignation +/- du bouton de changement de température de la pointe."
-		},
-		"TempChangeShortStep": {
-						"text2": [
-				"Temp change",
-				"Court?"
-			],
-			"desc": "Incrément de changement de température sur appui court."
-		},
-		"TempChangeLongStep": {
-						"text2": [
-				"Temp change",
-				"Long?"
-			],
-			"desc": "Incrément de changement de température sur appui long."
-		},
-		"PowerPulsePower":{
-						"text2": [
-				"Power",
-				"Pulse W"
-			],
-			"desc": "Keep awake pulse power intensity"
-		},
-		"TipGain": {
-						"text2": [
-				"Modify",
-				"tip gain"
-			],
-			"desc": "Tip gain"
-		}
-	}
-}

Translation Editor/translation_hr.json

@@ -1,251 +0,0 @@
-{
-	"languageCode": "HR",
-	"languageLocalName": "Hrvatski",
-	"cyrillicGlyphs": false,
-	"messages": {
-		"SettingsCalibrationDone": "Kalibracija gotova!",
-		"SettingsCalibrationWarning": "Provjerite da je vršak ohlađen na sobnu temperaturu prije nego što nastavite!",
-		"SettingsResetWarning": "Jeste li sigurni da želite sve postavke vratiti na tvorničke vrijednosti?",
-		"UVLOWarningString": "BATERIJA",
-		"UndervoltageString": "PRENIZAK NAPON",
-		"InputVoltageString": "Napajanje: ",
-		"WarningTipTempString": "Temp vrha: ",
-		"BadTipString": "LOŠ VRH",
-		"SleepingSimpleString": "Zzz ",
-		"SleepingAdvancedString": "SPAVANJE...",
-		"WarningSimpleString": "VRUĆ",
-		"WarningAdvancedString": "OPREZ, VRUĆE!",
-		"SleepingTipAdvancedString": "Vrh: ",
-		"IdleTipString": "Vrh: ",
-		"IdleSetString": " / ",
-		"TipDisconnectedString": "VRH NIJE SPOJEN!",
-		"SolderingAdvancedPowerPrompt": "Snaga: ",
-		"OffString": "Off",
-		"ResetOKMessage": "Reset OK"
-	},
-	"characters": {
-		"SettingRightChar": "D",
-		"SettingLeftChar": "L",
-		"SettingAutoChar": "A",
-		"SettingFastChar": "B",
-		"SettingSlowChar": "S",
-		"SettingStartSolderingChar": "T",
-		"SettingStartSleepChar": "S",
-		"SettingStartSleepOffChar": "O",
-		"SettingStartNoneChar": "F"
-	},
-	"menuGroups": {
-		"SolderingMenu": {
-			"text2": [
-				"Postavke",
-				"lemljenja"
-			],
-			"desc": "Postavke pri lemljenju"
-		},
-		"PowerSavingMenu": {
-			"text2": [
-				"Ušteda",
-				"energije"
-			],
-			"desc": "Postavke spavanja i štednje energije"
-		},
-		"UIMenu": {
-			"text2": [
-				"Korisničko",
-				"sučelje"
-			],
-			"desc": "Postavke korisničkog sučelja"
-		},
-		"AdvancedMenu": {
-			"text2": [
-				"Napredne",
-				"opcije"
-			],
-			"desc": "Upravljanje naprednim opcijama"
-		}
-	},
-	"menuOptions": {
-		"PowerSource": {
-						"text2": [
-				"Izvor",
-				"napajanja"
-			],
-			"desc": "Izvor napajanja. Postavlja napon isključivanja. <DC 10V> <S 3.3V po ćeliji>"
-		},
-		"SleepTemperature": {
-						"text2": [
-				"Temp",
-				"spavanja"
-			],
-			"desc": "Temperatura na koju se spušta lemilica nakon određenog vremena mirovanja. <C/F>"
-		},
-		"SleepTimeout": {
-						"text2": [
-				"Vrijeme",
-				"spavanja"
-			],
-			"desc": "Vrijeme mirovanja nakon kojega lemilica spušta temperaturu. <Minute/Sekunde>"
-		},
-		"ShutdownTimeout": {
-						"text2": [
-				"Vrijeme",
-				"gašenja"
-			],
-			"desc": "Vrijeme mirovanja nakon kojega će se lemilica ugasiti. <Minute>"
-		},
-		"MotionSensitivity": {
-						"text2": [
-				"Osjetljivost",
-				"pokreta"
-			],
-			"desc": "Osjetljivost prepoznavanja pokreta. <0=Ugašeno, 1=Najmanje osjetljivo, 9=Najosjetljivije>"
-		},
-		"TemperatureUnit": {
-						"text2": [
-				"Jedinica",
-				"temperature"
-			],
-			"desc": "Jedinica temperature. <C=Celzij, F=Fahrenheit>"
-		},
-		"AdvancedIdle": {
-						"text2": [
-				"Detalji",
-				"pri čekanju"
-			],
-			"desc": "Prikazivanje detaljnih informacija tijekom čekanja."
-		},
-		"DisplayRotation": {
-						"text2": [
-				"Rotacija",
-				"ekrana"
-			],
-			"desc": "Orijentacija ekrana. <A=Automatski, L=Ljevoruki, D=Desnoruki>"
-		},
-		"BoostTemperature": {
-						"text2": [
-				"Boost",
-				"temp"
-			],
-			"desc": "Temperatura u pojačanom (Boost) načinu."
-		},
-		"AutoStart": {
-						"text2": [
-				"Auto",
-				"start"
-			],
-			"desc": "Ako je aktivno, lemilica po uključivanju napajanja odmah počinje grijati."
-		},
-		"CooldownBlink": {
-						"text2": [
-				"Upozorenje",
-				"pri hlađenju"
-			],
-			"desc": "Bljeskanje temperature prilikom hlađenja, ako je lemilica vruća."
-		},
-		"TemperatureCalibration": {
-						"text2": [
-				"Kalibracija",
-				"temperature"
-			],
-			"desc": "Kalibriranje temperature mjeri razliku temperatura vrška i drške, dok je lemilica hladna."
-		},
-		"SettingsReset": {
-						"text2": [
-				"Tvorničke",
-				"postavke"
-			],
-			"desc": "Vraćanje svih postavki na tvorničke vrijednosti."
-		},
-		"VoltageCalibration": {
-						"text2": [
-				"Kalibracija",
-				"napona napajanja"
-			],
-			"desc": "Kalibracija ulaznog napona. Podešavanje gumbima, dugački pritisak za kraj."
-		},
-		"AdvancedSoldering": {
-						"text2": [
-				"Detalji",
-				"pri lemljenju"
-			],
-			"desc": "Prikazivanje detaljnih informacija tijekom lemljenja."
-		},
-		"ScrollingSpeed": {
-						"text2": [
-				"Brzina",
-				"poruka"
-			],
-			"desc": "Brzina kretanja dugačkih poruka. <B=brzo, S=sporo>"
-		},
-		"TipModel": {
-						"text2": [
-				"Model",
-				"Vrha"
-			],
-			"desc": "Odabir modela lemnog vrha"
-		},
-		"SimpleCalibrationMode": {
-						"text2": [
-				"Jednostavna",
-				"kalibracija"
-			],
-			"desc": "Kalibracija kipućom vodom"
-		},
-		"AdvancedCalibrationMode": {
-						"text2": [
-				"Napredna",
-				"kalibracija"
-			],
-			"desc": "Kalibracija korištenjem termo-elementa"
-		},
-		"PowerInput": {
-						"text2": [
-				"Snaga",
-				"napajanja"
-			],
-			"desc": "Snaga modula za napajanje"
-		},
-		"PowerLimit": {
-						"text2": [
-				"Power",
-				"Limit"
-			],
-			"desc": "Maximum power the iron can use <Watts>"
-		},
-		"ReverseButtonTempChange": {
-						"text2": [
-				"Key +-",
-				"reverse?"
-			],
-			"desc": "Reverse the tip temperature change buttons plus minus assignment."
-		},
-		"TempChangeShortStep": {
-						"text2": [
-				"Temp change",
-				"short?"
-			],
-			"desc": "Temperature change steps on short button press!"
-		},
-		"TempChangeLongStep": {
-						"text2": [
-				"Temp change",
-				"long?"
-			],
-			"desc": "Temperature change steps on long button press!"
-		},
-		"PowerPulsePower":{
-						"text2": [
-				"Power",
-				"Pulse W"
-			],
-			"desc": "Keep awake pulse power intensity"
-		},
-		"TipGain": {
-						"text2": [
-				"Modify",
-				"tip gain"
-			],
-			"desc": "Tip gain"
-		}
-	}
-}

Translation Editor/translation_hu.json

@@ -1,251 +0,0 @@
-{
-	"languageCode": "HU",
-	"languageLocalName": "Magyar",
-	"cyrillicGlyphs": false,
-	"messages": {
-		"SettingsCalibrationDone": "Kalibráció befejezve!",
-		"SettingsCalibrationWarning": "Folytatás előtt győződjön meg róla, hogy a hegy szobahőmérsékletű!",
-		"SettingsResetWarning": "Biztosan visszaállítja a beállításokat az alapértelmezett értékekre?",
-		"UVLOWarningString": "DC KEVÉS",
-		"UndervoltageString": "Alulfeszültség",
-		"InputVoltageString": "Bemenet V: ",
-		"WarningTipTempString": "Hegy hő: ",
-		"BadTipString": "HEGY HIB",
-		"SleepingSimpleString": "Zzzz",
-		"SleepingAdvancedString": "Alvás...",
-		"WarningSimpleString": "FORR",
-		"WarningAdvancedString": "!! FORRÓ HEGY !!",
-		"SleepingTipAdvancedString": "Hegy:",
-		"IdleTipString": "Hegy:",
-		"IdleSetString": " Cél:",
-		"TipDisconnectedString": "HEGY LEVÉVE",
-		"SolderingAdvancedPowerPrompt": "Telj: ",
-		"OffString": "Ki",
-		"ResetOKMessage": "Reset OK"
-	},
-	"characters": {
-		"SettingRightChar": "J",
-		"SettingLeftChar": "B",
-		"SettingAutoChar": "A",
-		"SettingFastChar": "G",
-		"SettingSlowChar": "L",
-		"SettingStartSolderingChar": "T",
-		"SettingStartSleepChar": "S",
-		"SettingStartSleepOffChar": "O",
-		"SettingStartNoneChar": "F"
-	},
-	"menuGroups": {
-		"SolderingMenu": {
-			"text2": [
-				"Forrasztási",
-				"beállítások"
-			],
-			"desc": "Forrasztási beállítások"
-		},
-		"PowerSavingMenu": {
-			"text2": [
-				"Alvási",
-				"módok"
-			],
-			"desc": "Energiatakarékossági beállítások"
-		},
-		"UIMenu": {
-			"text2": [
-				"Felhasználó",
-				"felület"
-			],
-			"desc": "Felhasználói felület beállításai"
-		},
-		"AdvancedMenu": {
-			"text2": [
-				"Haladó",
-				"beállítások"
-			],
-			"desc": "Haladó beállítások"
-		}
-	},
-	"menuOptions": {
-		"PowerSource": {
-						"text2": [
-				"Áram",
-				"forrás"
-			],
-			"desc": "Áramforrás. Beállítja a lekapcsolási feszültséget. <DC 10V> <S 3.3V cellánként>"
-		},
-		"SleepTemperature": {
-						"text2": [
-				"Alvási",
-				"hőfok"
-			],
-			"desc": "Alvási hőmérséklet <C>"
-		},
-		"SleepTimeout": {
-						"text2": [
-				"Alvás",
-				"időzítő"
-			],
-			"desc": "Alvás időzítő <perc/másodperc>"
-		},
-		"ShutdownTimeout": {
-						"text2": [
-				"Kikapcsolás",
-				"időzítő"
-			],
-			"desc": "Kikapcsolási időzítő <perc>"
-		},
-		"MotionSensitivity": {
-						"text2": [
-				"Mozgás",
-				"érzékenység"
-			],
-			"desc": "Mozgás érzékenység beállítása. <0.kikapcsolva 1.legkevésbé érzékeny 9.legérzékenyebb>"
-		},
-		"TemperatureUnit": {
-						"text2": [
-				"Hőmérséklet",
-				"mértékegysége"
-			],
-			"desc": "Hőmérséklet mértékegysége <C=Celsius F=Fahrenheit>"
-		},
-		"AdvancedIdle": {
-						"text2": [
-				"Részletes",
-				"készenlét"
-			],
-			"desc": "Részletes információ megjelenítése kisebb betűméretben a készenléti képernyőn."
-		},
-		"DisplayRotation": {
-						"text2": [
-				"Kijelző",
-				"tájolása"
-			],
-			"desc": "Kijelző tájolása <A. automatikus B. balkezes J. jobbkezes>"
-		},
-		"BoostTemperature": {
-						"text2": [
-				"Boost",
-				"hőfok"
-			],
-			"desc": "Hőmérséklet \"boost\" módban"
-		},
-		"AutoStart": {
-						"text2": [
-				"Automatikus",
-				"indítás"
-			],
-			"desc": "Bekapcsolás után automatikusan lépjen forrasztás módba. T=forrasztás, S=alvó mód, F=ki"
-		},
-		"CooldownBlink": {
-						"text2": [
-				"Villogás",
-				"hűléskor"
-			],
-			"desc": "Villogjon a hőmérséklet hűlés közben, amíg a hegy forró."
-		},
-		"TemperatureCalibration": {
-						"text2": [
-				"Hőmérséklet",
-				"kalibrálása?"
-			],
-			"desc": "Hegy hőmérséklet-különbségének kalibrálása."
-		},
-		"SettingsReset": {
-						"text2": [
-				"Gyári",
-				"beállítások?"
-			],
-			"desc": "Beállítások alaphelyzetbe állítása"
-		},
-		"VoltageCalibration": {
-						"text2": [
-				"Bemeneti fesz",
-				"kalibrálása?"
-			],
-			"desc": "Bemeneti feszültség kalibrálása. Röviden megnyomva módosítás, hosszan megnyomva kilépés"
-		},
-		"AdvancedSoldering": {
-						"text2": [
-				"Részletes",
-				"forr. kép."
-			],
-			"desc": "Részletes információk megjelenítése forrasztás közben"
-		},
-		"ScrollingSpeed": {
-						"text2": [
-				"Görgetés",
-				"sebessége"
-			],
-			"desc": "Szöveggörgetés sebessége"
-		},
-		"TipModel": {
-						"text2": [
-				"Forrasztóhegy",
-				"modell"
-			],
-			"desc": "Forrasztóhegy modell kiválasztása"
-		},
-		"SimpleCalibrationMode": {
-						"text2": [
-				"Egyszerű",
-				"kalibráció"
-			],
-			"desc": "Egyszerű kalibrálás forró víz segítségével"
-		},
-		"AdvancedCalibrationMode": {
-						"text2": [
-				"Haladó",
-				"Kalibráció"
-			],
-			"desc": "Haladó kalibrálás hegyre helyezett hőelem segítségével"
-		},
-		"PowerInput": {
-						"text2": [
-				"Bemeneti",
-				"teljesítmény"
-			],
-			"desc": "A tápegység által leadott teljesítmény"
-		},
-		"PowerLimit": {
-						"text2": [
-				"Telj",
-				"maximum"
-			],
-			"desc": "Maximális teljesitmény beállitása <Watts>"
-		},
-		"ReverseButtonTempChange": {
-						"text2": [
-				"GOMB +-",
-				"Felcseréled?"
-			],
-			"desc": "A páka hömérséklet növelés csökkentési gombok felcserélése."
-		},
-		"TempChangeShortStep": {
-						"text2": [
-				"Hömérséklet",
-				"váltás rövid?"
-			],
-			"desc": "Hömérséklet váltás rövid gombnyomásrs bekapcsolva!"
-		},
-		"TempChangeLongStep": {
-						"text2": [
-				"Hömérséklet",
-				"váltás hosszú?"
-			],
-			"desc": "Hömérséklet váltás hosszú gombnyomásrs bekapcsolva!"
-		},
-		"PowerPulsePower":{
-						"text2": [
-				"Telj power",
-				"bank üzem W"
-			],
-			"desc": "Powerbank üzemnél nem engedi a powerbankot kikapcsolni idönkénti áram felvételt generál. "
-		},
-		"TipGain": {
-						"text2": [
-				"Modify",
-				"tip gain"
-			],
-			"desc": "Tip gain"
-		}
-	}
-}

Translation Editor/translation_it.json

@@ -1,253 +0,0 @@
-{
-	"languageCode": "IT",
-	"languageLocalName": "Italiano",
-	"cyrillicGlyphs": false,
-	"messages": {
-		"SettingsCalibrationDone": "Calibrazione effettuata",
-		"SettingsCalibrationWarning": "Assicurati che la punta si trovi a temperatura ambiente prima di continuare!",
-		"SettingsResetWarning": "Ripristinare le impostazioni iniziali?",
-		"UVLOWarningString": "DC BASSA",
-		"UndervoltageString": "DC INSUFFICIENTE",
-		"InputVoltageString": "V ingresso:",
-		"WarningTipTempString": "Temp punta:",
-		"BadTipString": "PUNTA NO",
-		"SleepingSimpleString": "Zzz ",
-		"SleepingAdvancedString": "Standby",
-		"WarningSimpleString": "HOT!",
-		"WarningAdvancedString": "PUNTA CALDA!",
-		"SleepingTipAdvancedString": "Punta:",
-		"IdleTipString": "T punta:",
-		"IdleSetString": "/",
-		"TipDisconnectedString": "PUNTA ASSENTE",
-		"SolderingAdvancedPowerPrompt": "Potenz:",
-		"OffString": "OFF",
-		"ResetOKMessage": "Reset OK",
-		"YourGainMessage": "Guad.: ",
-		"SettingsResetMessage": "Reset effettuato"
-	},
-	"characters": {
-		"SettingRightChar": "D",
-		"SettingLeftChar": "S",
-		"SettingAutoChar": "A",
-		"SettingFastChar": "V",
-		"SettingSlowChar": "L",
-		"SettingStartSolderingChar": "A",
-		"SettingStartSleepChar": "S",
-		"SettingStartSleepOffChar": "O",
-		"SettingStartNoneChar": "D"
-	},
-	"menuGroups": {
-		"SolderingMenu": {
-			"text2": [
-				"Opzioni",
-				"saldatura"
-			],
-			"desc": "Menù d'impostazioni della modalità Saldatura"
-		},
-		"PowerSavingMenu": {
-			"text2": [
-				"Risparmio",
-				"energetico"
-			],
-			"desc": "Menù d'impostazioni per il risparmio energetico"
-		},
-		"UIMenu": {
-			"text2": [
-				"Interfaccia",
-				"utente"
-			],
-			"desc": "Menù d'impostazioni dell'interfaccia utente"
-		},
-		"AdvancedMenu": {
-			"text2": [
-				"Opzioni",
-				"avanzate"
-			],
-			"desc": "Menù d'impostazioni avanzate"
-		}
-	},
-	"menuOptions": {
-		"PowerSource": {
-						"text2": [
-				"Sorgente",
-				"alimentaz"
-			],
-			"desc": "Scegli la sorgente di alimentazione; se a batteria, limita lo scaricamento al valore di soglia <DC: 10V; S: 3,3V per cella>"
-		},
-		"SleepTemperature": {
-						"text2": [
-				"Temp",
-				"standby"
-			],
-			"desc": "Imposta la temperatura da mantenere in modalità Standby <°C/°F>"
-		},
-		"SleepTimeout": {
-						"text2": [
-				"Timer",
-				"standby"
-			],
-			"desc": "Imposta il timer per entrare in modalità Standby <minuti/secondi>"
-		},
-		"ShutdownTimeout": {
-						"text2": [
-				"Timer",
-				"spegnimento"
-			],
-			"desc": "Imposta il timer per lo spegnimento <minuti>"
-		},
-		"MotionSensitivity": {
-						"text2": [
-				"Sensibilità",
-				"al movimento"
-			],
-			"desc": "Imposta la sensibilità al movimento per uscire dalla modalità Standby <0: nessuna; 1: minima; 9: massima>"
-		},
-		"TemperatureUnit": {
-						"text2": [
-				"Unità di",
-				"temperatura"
-			],
-			"desc": "Scegli l'unità di misura per la temperatura <C: grado Celsius; F: grado Farenheit>"
-		},
-		"AdvancedIdle": {
-						"text2": [
-				"Interfaccia",
-				"testuale"
-			],
-			"desc": "Mostra informazioni dettagliate all'interno della schermata principale"
-		},
-		"DisplayRotation": {
-						"text2": [
-				"Orientamento",
-				"display"
-			],
-			"desc": "Imposta l'orientamento del display <A: automatico; S: mano sinistra; D: mano destra>"
-		},
-		"BoostTemperature": {
-						"text2": [
-				"Temp",
-				"«Turbo»"
-			],
-			"desc": "Imposta la temperatura della funzione «Turbo»"
-		},
-		"AutoStart": {
-						"text2": [
-				"Avvio",
-				"automatico"
-			],
-			"desc": "Attiva automaticamente il saldatore quando viene alimentato <A: saldatura; S: standby; D: disattiva>"
-		},
-		"CooldownBlink": {
-						"text2": [
-				"Avviso",
-				"punta calda"
-			],
-			"desc": "Evidenzia il valore di temperatura durante il raffreddamento se la punta è ancora calda"
-		},
-		"TemperatureCalibration": {
-						"text2": [
-				"Calibrazione",
-				"temperatura"
-			],
-			"desc": "Calibra le rilevazioni di temperatura"
-		},
-		"SettingsReset": {
-						"text2": [
-				"Ripristino",
-				"impostazioni"
-			],
-			"desc": "Ripristina tutte le impostazioni"
-		},
-		"VoltageCalibration": {
-						"text2": [
-				"Calibrazione",
-				"tensione"
-			],
-			"desc": "Calibra la tensione in ingresso; regola con entrambi i tasti, tieni premuto il tasto superiore per uscire"
-		},
-		"AdvancedSoldering": {
-						"text2": [
-				"Dettagli",
-				"saldatura"
-			],
-			"desc": "Mostra informazioni dettagliate durante la modalità Saldatura"
-		},
-		"ScrollingSpeed": {
-						"text2": [
-				"Velocità",
-				"testo"
-			],
-			"desc": "Imposta la velocità di scorrimento del testo <L: lento; V: veloce>"
-		},
-		"TipModel": {
-						"text2": [
-				"Modello",
-				"punta"
-			],
-			"desc": "Seleziona il modello della punta in uso"
-		},
-		"SimpleCalibrationMode": {
-						"text2": [
-				"Calibrazione",
-				"semplice"
-			],
-			"desc": "Calibra le rilevazioni di temperatura tramite l'utilizzo di acqua calda"
-		},
-		"AdvancedCalibrationMode": {
-						"text2": [
-				"Calibrazione",
-				"avanzata"
-			],
-			"desc": "Calibra le rilevazioni di temperatura attraverso la termocoppia presente nella punta"
-		},
-		"PowerInput": {
-						"text2": [
-				"Potenza",
-				"alimentaz"
-			],
-			"desc": "Imposta la potenza massima erogabile dall'alimentatore in uso"
-		},
-		"PowerLimit": {
-						"text2": [
-				"Limite",
-				"di potenza"
-			],
-			"desc": "Imposta il valore di potenza massima erogabile al saldatore <watt>"
-		},
-		"ReverseButtonTempChange": {
-						"text2": [
-				"Inversione",
-				"tasti"
-			],
-			"desc": "Inverti i tasti per impostare la temperatura della punta "
-		},
-		"TempChangeShortStep": {
-						"text2": [
-				"Cambio temp",
-				"pressione breve"
-			],
-			"desc": "Varia la temperatura della punta attraverso una breve pressione dei tasti"
-		},
-		"TempChangeLongStep": {
-						"text2": [
-				"Cambio temp",
-				"pressione lunga"
-			],
-			"desc": "Varia la temperatura della punta attraverso una lunga pressione dei tasti"
-		},
-		"PowerPulsePower": {
-						"text2": [
-				"Potenza impulso",
-				"«Keep-Alive»"
-			],
-			"desc": "Regola la potenza d'impulso in ingresso al saldatore per prevenire lo standby eventuale dell'alimentatore <watt>"
-		},
-		"TipGain": {
-						"text2": [
-				"Guadagno",
-				"punta"
-			],
-			"desc": "Varia il guadagno della punta"
-		}
-	}
-}

Translation Editor/translation_lt.json

@@ -1,251 +0,0 @@
-{
-	"languageCode": "LT",
-	"languageLocalName": "Lietuvių",
-	"cyrillicGlyphs": false,
-	"messages": {
-		"SettingsCalibrationDone": "Kalibracija atlikta!",
-		"SettingsCalibrationWarning": "Prieš tęsdami įsitikinkite, kad antgalis yra kambario temperatūros!",
-		"SettingsResetWarning": "Ar norite atstatyti nustatymus į numatytas reikšmes?",
-		"UVLOWarningString": "MAŽ VOLT",
-		"UndervoltageString": "Žema įtampa",
-		"InputVoltageString": "Įvestis V: ",
-		"WarningTipTempString": "Antgl Temp: ",
-		"BadTipString": "BLOG ANT",
-		"SleepingSimpleString": "Zzzz",
-		"SleepingAdvancedString": "Miegu...",
-		"WarningSimpleString": "KRŠ!",
-		"WarningAdvancedString": "ANTGALIS KARŠTAS",
-		"SleepingTipAdvancedString": "Antgl:",
-		"IdleTipString": "Ant:",
-		"IdleSetString": " Nust:",
-		"TipDisconnectedString": "ANTGAL ATJUNGTAS",
-		"SolderingAdvancedPowerPrompt": "Maitinimas: ",
-		"OffString": "Išj",
-		"ResetOKMessage": "Reset OK"
-	},
-	"characters": {
-		"SettingRightChar": "D",
-		"SettingLeftChar": "K",
-		"SettingAutoChar": "A",
-		"SettingFastChar": "T",
-		"SettingSlowChar": "N",
-		"SettingStartSolderingChar": "T",
-		"SettingStartSleepChar": "S",
-		"SettingStartSleepOffChar": "O",
-		"SettingStartNoneChar": "F"
-	},
-	"menuGroups": {
-		"SolderingMenu": {
-			"text2": [
-				"Litavimo",
-				"nustatymai"
-			],
-			"desc": "Litavimo nustatymai"
-		},
-		"PowerSavingMenu": {
-			"text2": [
-				"Miego",
-				"režimai"
-			],
-			"desc": "Energijos vartojimo nustatymai"
-		},
-		"UIMenu": {
-			"text2": [
-				"Naudotojo",
-				"sąsaja"
-			],
-			"desc": "Naudotojo sąsajos nustatymai"
-		},
-		"AdvancedMenu": {
-			"text2": [
-				"Išplėstin.",
-				"nustatymai"
-			],
-			"desc": "Išplėstiniai nustatymai"
-		}
-	},
-	"menuOptions": {
-		"PowerSource": {
-						"text2": [
-				"Maitinimo",
-				"šaltinis"
-			],
-			"desc": "Išjungimo įtampa. <DC 10V arba celių (S) kiekis (3.3V per celę)>"
-		},
-		"SleepTemperature": {
-						"text2": [
-				"Miego",
-				"temperat."
-			],
-			"desc": "Miego temperatūra <C>"
-		},
-		"SleepTimeout": {
-						"text2": [
-				"Miego",
-				"laikas"
-			],
-			"desc": "Miego laikas <minutės/sekundės>"
-		},
-		"ShutdownTimeout": {
-						"text2": [
-				"Išjungimo",
-				"laikas"
-			],
-			"desc": "Išjungimo laikas <minutės>"
-		},
-		"MotionSensitivity": {
-						"text2": [
-				"Jautrumas",
-				"judesiui"
-			],
-			"desc": "Jautrumas judesiui <0 - išjungta, 1 - mažiausias, 9 - didžiausias>"
-		},
-		"TemperatureUnit": {
-						"text2": [
-				"Temperatūros",
-				"vienetai"
-			],
-			"desc": "Temperatūros vienetai <C - Celsijus, F - Farenheitas>"
-		},
-		"AdvancedIdle": {
-						"text2": [
-				"Detalus lauki",
-				"mo ekranas"
-			],
-			"desc": "Ar rodyti papildomą informaciją mažesniu šriftu laukimo ekrane"
-		},
-		"DisplayRotation": {
-						"text2": [
-				"Ekrano",
-				"orientacija"
-			],
-			"desc": "Ekrano orientacija <A - automatinė, K - kairiarankiams, D - dešiniarankiams>"
-		},
-		"BoostTemperature": {
-						"text2": [
-				"Turbo",
-				"temperat."
-			],
-			"desc": "Temperatūra turbo režimu"
-		},
-		"AutoStart": {
-						"text2": [
-				"Auto",
-				"paleidimas"
-			],
-			"desc": "Ar pradėti kaitininti iš karto įjungus lituoklį"
-		},
-		"CooldownBlink": {
-						"text2": [
-				"Atvėsimo",
-				"mirksėjimas"
-			],
-			"desc": "Ar mirksėti temperatūrą ekrane kol vėstantis antgalis vis dar karštas"
-		},
-		"TemperatureCalibration": {
-						"text2": [
-				"Kalibruoti",
-				"temperatūrą?"
-			],
-			"desc": "Antgalio temperatūros kalibravimas"
-		},
-		"SettingsReset": {
-						"text2": [
-				"Atstatyti",
-				"nustatymus?"
-			],
-			"desc": "Nustatyti nustatymus iš naujo"
-		},
-		"VoltageCalibration": {
-						"text2": [
-				"Kalibruoti",
-				"įvesties įtampą?"
-			],
-			"desc": "Įvesties įtampos kalibravimas. Trumpai paspauskite, norėdami nustatyti, ilgai paspauskite, kad išeitumėte"
-		},
-		"AdvancedSoldering": {
-						"text2": [
-				"Detalus lita-",
-				"vimo ekranas"
-			],
-			"desc": "Ar rodyti išsamią informaciją lituojant"
-		},
-		"ScrollingSpeed": {
-						"text2": [
-				"Greitas apr",
-				"ašym. slink"
-			],
-			"desc": "Greitis, kuriuo šis tekstas slenka"
-		},
-		"TipModel": {
-						"text2": [
-				"Antgalio",
-				"modelis"
-			],
-			"desc": "Antgalio modelio pasirinkimas"
-		},
-		"SimpleCalibrationMode": {
-						"text2": [
-				"Paprasta",
-				"kalibracija"
-			],
-			"desc": "Paprasta kalibracija naudojant karštą vandienį"
-		},
-		"AdvancedCalibrationMode": {
-						"text2": [
-				"Išplėstinė",
-				"kalibracija"
-			],
-			"desc": "Išplėstinė kalibracija naudojant termoelementą"
-		},
-		"PowerInput": {
-						"text2": [
-				"Galia",
-				"vatais"
-			],
-			"desc": "Maitinimo bloko galia vatais"
-		},
-		"PowerLimit": {
-						"text2": [
-				"Power",
-				"Limit"
-			],
-			"desc": "Maximum power the iron can use <Watts>"
-		},
-		"ReverseButtonTempChange": {
-						"text2": [
-				"Key +-",
-				"reverse?"
-			],
-			"desc": "Reverse the tip temperature change buttons plus minus assignment."
-		},
-		"TempChangeShortStep": {
-						"text2": [
-				"Temp change",
-				"short?"
-			],
-			"desc": "Temperature change steps on short button press!"
-		},
-		"TempChangeLongStep": {
-						"text2": [
-				"Temp change",
-				"long?"
-			],
-			"desc": "Temperature change steps on long button press!"
-		},
-		"PowerPulsePower":{
-						"text2": [
-				"Power",
-				"Pulse W"
-			],
-			"desc": "Keep awake pulse power intensity"
-		},
-		"TipGain": {
-						"text2": [
-				"Modify",
-				"tip gain"
-			],
-			"desc": "Tip gain"
-		}
-	}
-}

Translation Editor/translation_nl.json

@@ -1,251 +0,0 @@
-{
-	"languageCode": "NL",
-	"languageLocalName": "Nederlands",
-	"cyrillicGlyphs": false,
-	"messages": {
-		"SettingsCalibrationDone": "Calibration done!",
-		"SettingsCalibrationWarning": "Zorg ervoor dat de soldeerpunt op kamertemperatuur is voor je verdergaat!",
-		"SettingsResetWarning": "Ben je zeker dat je alle instellingen naar de standaardwaardes wilt terugzetten?",
-		"UVLOWarningString": "DC LAAG",
-		"UndervoltageString": "Onderspanning",
-		"InputVoltageString": "Input V: ",
-		"WarningTipTempString": "Tip Temp: ",
-		"BadTipString": "DEFECT",
-		"SleepingSimpleString": "Zzz ",
-		"SleepingAdvancedString": "Slaapstand...",
-		"WarningSimpleString": "HEET",
-		"WarningAdvancedString": "!!! TIP HEET !!!",
-		"SleepingTipAdvancedString": "Tip:",
-		"IdleTipString": "Tip:",
-		"IdleSetString": " Set:",
-		"TipDisconnectedString": "TIP LOSGEKOPPELD",
-		"SolderingAdvancedPowerPrompt": "vermogen: ",
-		"OffString": "Off",
-		"ResetOKMessage": "Reset OK"
-	},
-	"characters": {
-		"SettingRightChar": "R",
-		"SettingLeftChar": "L",
-		"SettingAutoChar": "A",
-		"SettingFastChar": "F",
-		"SettingSlowChar": "S",
-		"SettingStartSolderingChar": "T",
-		"SettingStartSleepChar": "S",
-		"SettingStartSleepOffChar": "O",
-		"SettingStartNoneChar": "F"
-	},
-	"menuGroups": {
-		"SolderingMenu": {
-			"text2": [
-				"Soldeer",
-				"Instellingen"
-			],
-			"desc": "Soldeerinstellingen"
-		},
-		"PowerSavingMenu": {
-			"text2": [
-				"Slaap",
-				"Modes"
-			],
-			"desc": "Batterijbesparingsinstellingen"
-		},
-		"UIMenu": {
-			"text2": [
-				"Gebruikers-",
-				"Interface"
-			],
-			"desc": "Gebruikersinterface Instellingen"
-		},
-		"AdvancedMenu": {
-			"text2": [
-				"geavanceerde",
-				"Instellingen"
-			],
-			"desc": "geavanceerde Instellingen"
-		}
-	},
-	"menuOptions": {
-		"PowerSource": {
-						"text2": [
-				"Spannings-",
-				"bron"
-			],
-			"desc": "Spanningsbron. Stelt drempelspanning in. <DC 10V> <S 3.3V per cel>"
-		},
-		"SleepTemperature": {
-						"text2": [
-				"Slaap",
-				"temp"
-			],
-			"desc": "Temperatuur in slaapstand <C>"
-		},
-		"SleepTimeout": {
-						"text2": [
-				"Slaap",
-				"time-out"
-			],
-			"desc": "Slaapstand time-out <Minuten/Seconden>"
-		},
-		"ShutdownTimeout": {
-						"text2": [
-				"Uitschakel",
-				"time-out"
-			],
-			"desc": "Automatisch afsluiten time-out <Minuten>"
-		},
-		"MotionSensitivity": {
-						"text2": [
-				"Bewegings-",
-				"gevoeligheid"
-			],
-			"desc": "Bewegingsgevoeligheid <0.uit 1.minst gevoelig 9.meest gevoelig>"
-		},
-		"TemperatureUnit": {
-						"text2": [
-				"Temperatuur",
-				"eenheid"
-			],
-			"desc": "Temperatuureenheid <C=Celsius F=Fahrenheit>"
-		},
-		"AdvancedIdle": {
-						"text2": [
-				"Gedetailleerd",
-				"slaapscherm"
-			],
-			"desc": "Gedetailleerde informatie weergeven in een kleiner lettertype op het slaapscherm."
-		},
-		"DisplayRotation": {
-						"text2": [
-				"Scherm-",
-				"oriëntatie"
-			],
-			"desc": "Schermoriëntatie <A. Automatisch L. Linkshandig R. Rechtshandig>"
-		},
-		"BoostTemperature": {
-						"text2": [
-				"Boost",
-				"temp"
-			],
-			"desc": "Temperatuur in boostmodes"
-		},
-		"AutoStart": {
-						"text2": [
-				"Auto",
-				"start"
-			],
-			"desc": "Breng de soldeerbout direct op temperatuur bij het opstarten. T=Soldeertemperatuur, S=Slaapstand-temperatuur, F=Uit"
-		},
-		"CooldownBlink": {
-						"text2": [
-				"Afkoel",
-				"flikker"
-			],
-			"desc": "Temperatuur laten flikkeren in het hoofdmenu als de soldeerpunt aan het afkoelen is."
-		},
-		"TemperatureCalibration": {
-						"text2": [
-				"Calibreer",
-				"temperatuur?"
-			],
-			"desc": "Temperatuursafwijking van de soldeerpunt calibreren."
-		},
-		"SettingsReset": {
-						"text2": [
-				"Instellingen",
-				"resetten?"
-			],
-			"desc": "Alle instellingen terugzetten."
-		},
-		"VoltageCalibration": {
-						"text2": [
-				"Calibreer",
-				"input-voltage?"
-			],
-			"desc": "VIN Calibreren. Knoppen lang ingedrukt houden om te bevestigen."
-		},
-		"AdvancedSoldering": {
-						"text2": [
-				"Gedetailleerd",
-				"soldeerscherm"
-			],
-			"desc": "Gedetailleerde informatie weergeven in een kleiner lettertype op het soldeerscherm."
-		},
-		"ScrollingSpeed": {
-						"text2": [
-				"Scroll",
-				"snelheid"
-			],
-			"desc": "Snelheid waarmee de tekst scrolt."
-		},
-		"TipModel": {
-						"text2": [
-				"Tip",
-				"Model"
-			],
-			"desc": "Tip Model selection"
-		},
-		"SimpleCalibrationMode": {
-						"text2": [
-				"Simple",
-				"Calibration"
-			],
-			"desc": "Simple Calibration using Hot water"
-		},
-		"AdvancedCalibrationMode": {
-						"text2": [
-				"Advanced",
-				"Calibration"
-			],
-			"desc": "Advanced calibration using thermocouple on the tip"
-		},
-		"PowerInput": {
-						"text2": [
-				"Power",
-				"Wattage"
-			],
-			"desc": "Power Wattage of the power adapter used"
-		},
-		"PowerLimit": {
-						"text2": [
-				"Power",
-				"Limit"
-			],
-			"desc": "Maximum power the iron can use <Watts>"
-		},
-		"ReverseButtonTempChange": {
-						"text2": [
-				"Key +-",
-				"reverse?"
-			],
-			"desc": "Reverse the tip temperature change buttons plus minus assignment."
-		},
-		"TempChangeShortStep": {
-						"text2": [
-				"Temp change",
-				"short?"
-			],
-			"desc": "Temperature change steps on short button press!"
-		},
-		"TempChangeLongStep": {
-						"text2": [
-				"Temp change",
-				"long?"
-			],
-			"desc": "Temperature change steps on long button press!"
-		},
-		"PowerPulsePower":{
-						"text2": [
-				"Power",
-				"Pulse W"
-			],
-			"desc": "Keep awake pulse power intensity"
-		},
-		"TipGain": {
-						"text2": [
-				"Modify",
-				"tip gain"
-			],
-			"desc": "Tip gain"
-		}
-	}
-}