Fix #1089

* Remove unused includes

* Adding in submodule

* Move fusb functions to the BSP

* Remove old code

* Creating IronOS PD integration wrapper

* Redirect to wrapper

* pd lib updates

* fix Docker build

* Finish linking across

* Cleanup

* Update Makefile

* Update push.yml

* Update push.yml

* PD -> Compensate for different tick rates

* Update codeql-analysis.yml

* Fix PD #define for @Firebie

* Check irq low at start

* Update BSP.h

* Update main.cpp

* Closer delay

* Update OLED.cpp

* Bugfix trying to start QC too early

* Missing fusb shouldnt hang qc

* Update FreeRTOSConfig.h

* Update the GD drivers

* Update Pinecil IRQ setup

* Redirect printf() to uart

* Update Power.cpp

* Adding extras to PD state

* Update USBPD.cpp

* Delay in printf

* Iterate once before delay on start

* Update usb-pd

* master usb-pd now

* Format gd libs

* Update gd32vf103_bkp.c

* Guard with PD timeout

* Remove CodeQL

* Slow for testing, fix runt pulses at start

* Fix runt pulse in read size 1

* Cleaner probing setup

* Testing delay during stop gen in read 1

* Update I2C driver

* Update gd32vf103_i2c.c

* Cleaning up i2c wrapper a little, given up on dma for rx

* Update preRTOS.cpp

* Update Setup.cpp

* Update MOVThread.cpp

* Slow down UART to work with new clock config

* Better ack setup for 2 byte read

* Cleanup POW_PD so cant be lost in #includes

* tipResistance -> TIP_RESISTANCE

* handle NOP race on len==2

* Update configuration.h

* Dont use neg timeout to mask anymore

* Not required for MHP

* Fix up source display Miniware

* Fix race on PD init

* Update POWThread.cpp

* Update formatting

* MHP format

* Update push.yml

* Faster TS80P I2C

* Bugfix for IRQ handlers

* Correctly handle I2C race on PD access

* Fix CI error (unused var) and MHP IRQ

* Test Pinecil alt ADC mode

.flake8

@@ -0,0 +1,3 @@
+[flake8]
+ignore = E203, E266, E501, W503, F403, F401
+max-line-length = 200

.github/ISSUE_TEMPLATE/bug_report.md

@@ -0,0 +1,32 @@
+---
+name: Bug report
+about: Create a report to help us improve
+title: ''
+labels: ''
+assignees: Ralim
+
+---
+
+**Describe the bug**
+<!-- A clear and concise description of what the bug is. -->
+
+**To Reproduce**
+<!-- Steps to reproduce the behavior:
+1. Go to '...'
+2. Click on '....'
+3. Scroll down to '....'
+4. See error -->
+
+**Expected behavior**
+<!-- A clear and concise description of what you expected to happen. -->
+
+
+**Details on your device:**
+ <!-- You can get these from the  debug menu by holding the rear button down and then using the front one to cycle through-->
+ - Device: [e.g. TS80/Pinecil etc]
+ - Release: [eg 2.15.40087E6]
+ - Power adapter being used:
+ - If this is an acceleromter related issue, please include its model number here:
+
+**Additional context**
+<!-- Add any other context about the problem here. -->

.github/ISSUE_TEMPLATE/everything-else--questions--notes-etc-.md

@@ -0,0 +1,10 @@
+---
+name: Everything else (Questions, notes etc)
+about: For remarking questions or notes
+title: ''
+labels: ''
+assignees: ''
+
+---
+
+<!-- **Questions are preferred to be kept to the discussions tab where possible, but otherwise go for it. be polite and as clear as possible.** -->

.github/ISSUE_TEMPLATE/feature_request.md

@@ -0,0 +1,20 @@
+---
+name: Feature request
+about: Suggest an idea for this project
+title: ''
+labels: enhancement
+assignees: Ralim
+
+---
+
+**Is your feature request related to a problem? Please describe.**
+<!-- A clear and concise description of what the problem is. Ex. I'm always frustrated when [...] -->
+
+**Describe the solution you'd like**
+<!-- A clear and concise description of what you want to happen. -->
+
+**Describe alternatives you've considered**
+<!-- A clear and concise description of any alternative solutions or features you've considered. -->
+
+**Additional context**
+<!-- Add any other context or screenshots about the feature request here. -->

.github/dependabot.yml

@@ -0,0 +1,11 @@
+version: 2
+updates:
+  - package-ecosystem: "github-actions"
+    directory: "/"
+    schedule:
+      # Check for updates to GitHub Actions every weekday
+      interval: "weekly"
+    open-pull-requests-limit: 10
+    commit-message:
+      prefix: chore
+      include: scope

.github/workflows/push.yml

@@ -3,17 +3,134 @@ name: CI
 on: [push, pull_request]
 
 jobs:
-  build_TS80:
-    runs-on: ubuntu-latest
+  build:
+    runs-on: ubuntu-20.04
+    strategy:
+      matrix:
+        model: ["TS100", "TS80", "TS80P", "Pinecil", "MHP30"]
+      fail-fast: true
 
     steps:
       - uses: actions/checkout@v2
+        with:
+          submodules: true
 
       - name: chmod
         run: chmod +x setup.sh && chmod +x source/build.sh && sudo mkdir -p /build/cache && sudo chmod -R 777 /build
 
       - name: Cached compiler source files
-        uses: actions/cache@v2
+        uses: actions/cache@v2.1.6
+        env:
+          cache-name: cache-compilers
+        with:
+          path: /build/cache
+          key: ${{ runner.os }}-build-${{ env.cache-name }}
+          restore-keys: |
+            ${{ runner.os }}-
+
+      - name: setup
+        run: ./setup.sh
+
+      - name: build ${{ matrix.model }}
+        run: cd source && ./build.sh -m ${{ matrix.model }}
+
+      - name: copy license text
+        run: |
+          cp LICENSE source/Hexfile/LICENSE
+          cp LICENSE_RELEASE.md source/Hexfile/LICENSE_RELEASE.md
+
+      - name: Archive ${{ matrix.model }} artifacts
+        uses: actions/upload-artifact@v2
+        with:
+          name: ${{ matrix.model }}
+          path: |
+            source/Hexfile/${{ matrix.model }}_*.hex
+            source/Hexfile/${{ matrix.model }}_*.dfu
+            source/Hexfile/LICENSE
+            source/Hexfile/LICENSE_RELEASE.md
+          if-no-files-found: error
+
+  build_multi-lang:
+    runs-on: ubuntu-20.04
+    strategy:
+      matrix:
+        model: ["Pinecil"]
+      fail-fast: true
+
+    steps:
+      - uses: actions/checkout@v2
+        with:
+          submodules: true
+
+      - name: chmod
+        run: chmod +x setup.sh && chmod +x source/build.sh && sudo mkdir -p /build/cache && sudo chmod -R 777 /build
+
+      - name: Cached compiler source files
+        uses: actions/cache@v2.1.6
+        env:
+          cache-name: cache-compilers
+        with:
+          path: /build/cache
+          key: ${{ runner.os }}-build-${{ env.cache-name }}
+          restore-keys: |
+            ${{ runner.os }}-
+
+      - name: setup
+        run: ./setup.sh
+
+      - name: build ${{ matrix.model }}
+        run: cd source && make -j$(nproc) model="${{ matrix.model }}" firmware-multi_compressed_European firmware-multi_compressed_Bulgarian+Russian+Serbian+Ukrainian firmware-multi_Chinese+Japanese
+
+      - name: copy license text
+        run: |
+          cp LICENSE source/Hexfile/LICENSE
+          cp LICENSE_RELEASE.md source/Hexfile/LICENSE_RELEASE.md
+
+      - name: Archive ${{ matrix.model }} artifacts
+        uses: actions/upload-artifact@v2
+        with:
+          name: ${{ matrix.model }}_multi-lang
+          path: |
+            source/Hexfile/${{ matrix.model }}_*.hex
+            source/Hexfile/${{ matrix.model }}_*.dfu
+            source/Hexfile/LICENSE
+            source/Hexfile/LICENSE_RELEASE.md
+          if-no-files-found: error
+
+  tests:
+    runs-on: ubuntu-20.04
+    steps:
+      - uses: actions/checkout@v2
+        with:
+          submodules: true
+
+      - name: Setup
+        run: sudo apt-get update && sudo apt-get install -y python3 && pip3 install bdflib
+
+      - name: Run python tests
+        run: cd Translations && chmod +x make_translation_test.py && ./make_translation_test.py
+
+      - name: Run BriefLZ tests
+        run: |
+          cd source
+          make Objects/host/brieflz/libbrieflz.so
+          cd ../Translations
+          chmod +x brieflz_test.py
+          ./brieflz_test.py
+
+  check_formatting:
+    runs-on: ubuntu-20.04
+
+    steps:
+      - uses: actions/checkout@v2
+        with:
+          submodules: true
+
+      - name: chmod
+        run: chmod +x setup.sh && chmod +x source/build.sh && sudo mkdir -p /build/cache && sudo chmod -R 777 /build
+
+      - name: Cached compiler source files
+        uses: actions/cache@v2.1.6
         env:
           cache-name: cache-compilers
         with:
@@ -24,119 +141,12 @@ jobs:
             ${{ runner.os }}-
 
       - name: setup
-        run: ./setup.sh
+        run: sudo apt-get update && sudo apt-get install -y make clang git python3 python3-pip && python3 -m pip install bdflib black flake8
+      - name: Check formatting with clang-format
+        run: cd source && make clean && make check-style
 
-      - name: build TS80
-        run: cd source && ./build.sh -m TS80
+      - name: Check python formatting with black
+        run: black --check Translations
 
-      - name: Archive TS80 artifacts
-        uses: actions/upload-artifact@v2
-        with:
-          name: TS80
-          path: |
-            source/Hexfile/TS80_*.hex
-            source/Hexfile/TS80_*.bin
-          if-no-files-found: error
-  build_TS80P:
-    runs-on: ubuntu-latest
-
-    steps:
-      - uses: actions/checkout@v2
-
-      - name: chmod
-        run: chmod +x setup.sh && chmod +x source/build.sh && sudo mkdir -p /build/cache && sudo chmod -R 777 /build
-
-      - name: Cached compiler source files
-        uses: actions/cache@v2
-        env:
-          cache-name: cache-compilers
-        with:
-          # we deliberately persist a cache folder forwards
-          path: /build/cache
-          key: ${{ runner.os }}-build-${{ env.cache-name }}
-          restore-keys: |
-            ${{ runner.os }}-
-
-      - name: setup
-        run: ./setup.sh
-
-      - name: build TS80P
-        run: cd source && ./build.sh -m TS80P
-
-      - name: Archive TS80P artifacts
-        uses: actions/upload-artifact@v2
-        with:
-          name: TS80P
-          path: |
-            source/Hexfile/TS80P_*.hex
-            source/Hexfile/TS80P_*.bin
-          if-no-files-found: error
-  build_TS100:
-    runs-on: ubuntu-latest
-
-    steps:
-      - uses: actions/checkout@v2
-
-      - name: chmod
-        run: chmod +x setup.sh && chmod +x source/build.sh && sudo mkdir -p /build/cache && sudo chmod -R 777 /build
-
-      - name: Cached compiler source files
-        uses: actions/cache@v2
-        env:
-          cache-name: cache-compilers
-        with:
-          # we deliberately persist a cache folder forwards
-          path: /build/cache
-          key: ${{ runner.os }}-build-${{ env.cache-name }}
-          restore-keys: |
-            ${{ runner.os }}-
-
-      - name: setup
-        run: ./setup.sh
-
-      - name: build TS100
-        run: cd source && ./build.sh -m TS100
-
-      - name: Archive TS100 artifacts
-        uses: actions/upload-artifact@v2
-        with:
-          name: TS100
-          path: |
-            source/Hexfile/TS100_*.hex
-            source/Hexfile/TS100_*.bin
-          if-no-files-found: error
-
-  build_Pinecil:
-    runs-on: ubuntu-latest
-
-    steps:
-      - uses: actions/checkout@v2
-
-      - name: chmod
-        run: chmod +x setup.sh && chmod +x source/build.sh && sudo mkdir -p /build/cache && sudo chmod -R 777 /build
-
-      - name: Cached compiler source files
-        uses: actions/cache@v2
-        env:
-          cache-name: cache-compilers
-        with:
-          # we deliberately persist a cache folder forwards
-          path: /build/cache
-          key: ${{ runner.os }}-build-${{ env.cache-name }}
-          restore-keys: |
-            ${{ runner.os }}-
-
-      - name: setup
-        run: ./setup.sh
-
-      - name: build Pinecil
-        run: cd source && ./build.sh -m Pinecil
-
-      - name: Archive Pinecil artifacts
-        uses: actions/upload-artifact@v2
-        with:
-          name: Pinecil
-          path: |
-            source/Hexfile/Pinecil_*.hex
-            source/Hexfile/Pinecil_*.bin
-          if-no-files-found: error
+      - name: Check python with flake8
+        run: flake8 Translations

.gitmodules

@@ -0,0 +1,3 @@
+[submodule "source/Core/Drivers/usb-pd"]
+	path = source/Core/Drivers/usb-pd
+	url = https://github.com/Ralim/usb-pd.git

Dockerfile

@@ -2,22 +2,30 @@ FROM ubuntu:20.04
 LABEL maintainer="Ben V. Brown <ralim@ralimtek.com>"
 
 WORKDIR /build
-# Setup the ARM GCC toolchain
-
-# Install any needed packages specified in requirements.txt
-RUN apt-get update && \
-  apt-get install -y \
+# Add extra mirrors for options
+RUN echo "deb mirror://mirrors.ubuntu.com/mirrors.txt focal main restricted universe multiverse" > /etc/apt/sources.list && \
+  echo "deb mirror://mirrors.ubuntu.com/mirrors.txt focal-updates main restricted universe multiverse" >> /etc/apt/sources.list && \
+  echo "deb mirror://mirrors.ubuntu.com/mirrors.txt focal-security main restricted universe multiverse" >> /etc/apt/sources.list && \
+  DEBIAN_FRONTEND=noninteractive apt-get update && apt-get install -y ca-certificates 
+# Install dependencies to build the firmware
+RUN apt-get install -y \
   make \
   bzip2 \
   git \
   python3 \
-  wget && \
+  python3-pip \
+  clang-format \
+  dfu-util \
+  wget --no-install-recommends && \
   apt-get clean
-RUN wget -qO- https://armkeil.blob.core.windows.net/developer/Files/downloads/gnu-rm/9-2020q2/gcc-arm-none-eabi-9-2020-q2-update-x86_64-linux.tar.bz2 | tar -xj
-RUN wget -qO- https://github.com/Ralim/nuclei-compiler/releases/download/2020.08/nuclei_riscv_newlibc_prebuilt_linux64_2020.08.tar.bz2 | tar -xj
+RUN python3 -m pip install bdflib
+# Download the two compilers
+RUN wget -qO- "https://developer.arm.com/-/media/Files/downloads/gnu-rm/10-2020q4/gcc-arm-none-eabi-10-2020-q4-major-x86_64-linux.tar.bz2" | tar -xj
+# This is the same as the one from Nuclei, just mirrored on Github as their download server is horrifically slow
+RUN wget -qO- "https://github.com/Ralim/nuclei-compiler/releases/download/2020.08/nuclei_riscv_newlibc_prebuilt_linux64_2020.08.tar.bz2" | tar -xj
 
 # Add compiler to the path
-ENV PATH "/build/gcc-arm-none-eabi-9-2020-q2-update/bin:$PATH"
+ENV PATH "/build/gcc-arm-none-eabi-10-2020-q4-major/bin:$PATH"
 ENV PATH "/build/gcc/bin/:$PATH"
 COPY . /build/source
 COPY ./ci /build/ci

Documentation/DebugMenu.md

@@ -1,7 +1,7 @@
 # Debugging Menu
 
-In this firmware there is extra debugging information hidden under and extra menu.
-This is accessed by holding the rear (B) button on the iron while its on the home screen.
+In this firmware there is extra debugging information hidden under an extra menu.
+This is accessed by holding the rear (B) button on the iron while it is on the home screen.
 
 This menu is meant to be simple, so it has no fancy GUI animations.
 
@@ -27,7 +27,7 @@ This indicates the High Water mark for the stack for the PID thread. The smaller
 
 ### Time
 
-This just shows how many seconds the unit has been powered for.
+This just shows how many deciseconds the unit has been powered for.
 
 ### Move
 
@@ -52,27 +52,28 @@ This is shown in degrees C x10, so 200 == 20.0C
 
 The input voltage as read by the internal ADC. Can be used to sanity check its being read correctly.
 
-### PCB 
+### ACC 
 
-This is slightly miss-named, but preserving the name for now.
-This indicates the PCB "version" number, which comes from the TS100 changing the model of accelerometer without warning.
 This indicates the accelerometer that is fitted inside the unit.
 
-- 0 = MMA8652
-- 1 = LIS2DH12
-- 2 = BMA223
-- 99 = None detected (running in fallback without movement detection)
+- MMA8652
+- LIS2DH12
+- BMA223
+- MSA301
+- SC7A20
+- None detected -> running in fallback without movement detection
+- Scanning -> Still searching I2C for one
 
 ### PWR 
 
 This indicates the current power source for the iron.
 This may change during power up as the sources are negotiated in turn.
 
-- 0 = DC input (dumb)
-- 1 = QC input (We used QC2/3 negotiation for current supply)
-- 2 = PD input (We used the PD subsystem to negotiate for the current supply)
+- **DC** input (dumb)
+- **QC** input (We used QC2/3 negotiation for current supply)
+- **PD** input (We used the PD subsystem to negotiate for the current supply)
 
 ### Max 
 
 This indicates the max temp in C that the system estimates it can measure the tip reliably to.
-This is dependant on a few factors including the handle temperature so it can move around during use.
+This is dependant on a few factors including the handle temperature so it can move around during use.

Documentation/Development.md

@@ -24,7 +24,7 @@ To update the language translation files & associated font map, execute the `mak
 
 ## Building Pinecil
 
-I highly reccomend using the command line tools and using docker to run the compiler.
-Its a bit more fussy on setup than the STM tooling and this is by far the easiest way.
+I highly recommend using the command line tools and using docker to run the compiler.
+It's a bit more fussy on setup than the STM tooling and this is by far the easiest way.
 If you _need_ an IDE I have used [Nuclei's IDE](https://nucleisys.com/download.php)
 And follow same idea as the STM Cube IDE notes above.

Documentation/Flashing.md

@@ -6,12 +6,12 @@
 
 Main releases are made to the [releases page](https://github.com/Ralim/IronOS/releases).
 Download the zip file that matches your model of soldering iron, and extract it.
-You then need to use the appropriate file type for your unit, in general Miniware irons are `.hex` and Pinecil is `.bin.`
+You then need to use the appropriate file type for your unit, in general Miniware irons are `.hex` and Pinecil is `.bin`.
 Flash according to details below
 
 ### Bleeding edge / latest
 
-For the _latest_ code, you will need to download the zip file from the artefacts page on the build for what you want.
+For the _latest_ code, you will need to download the zip file from the artifacts page on the build for what you want.
 Head to the [Actions](https://github.com/Ralim/IronOS/actions) page and then select the run for the appropriate branch you would like.
 In general you probably want `master`.
 
@@ -20,14 +20,12 @@ Then this works the same as a production release (use the correct file).
 
 ## Miniware irons (TS100, TS80, TS80P)
 
-This is completely safe, but if it goes wrong just put the .hex file from the official website onto the unit and you're back to the old firmware. Downloads for the hex files to flash are available on the [releases page.](https://github.com/Ralim/IronOS/releases) The file you want is called *(MODEL)_EN.hex* unless you want the translations, they are (MODEL)_*language short name*.hex. Where (MODEL) is either TS100 or TS80.
-
-Officially the bootloader on the iron only works under Windows (use the built-in File Explorer, as alternative file managers or copy handlers like Teracopy will fail). However, users have reported that it does work under Mac, and can be made to work under Linux *sometimes*. Details over on the [wiki page](https://github.com/Ralim/ts100/wiki/Upgrading-Firmware). 
-
+This is completely safe, but if it goes wrong just put the .hex file from the [official website](http://www.miniware.com.cn/product-category/soldering-pen/electric-soldering-kit/) onto the unit and you're back to the old firmware. Downloads for the hex files to flash are available on the [releases page.](https://github.com/Ralim/IronOS/releases) The file you want is called _(MODEL)\_EN.hex_ unless you want the translations, they are (MODEL)\__language short name_.hex. Where (MODEL) is either TS100 or TS80.
 
+Officially the bootloader on the iron only works under Windows (use the built-in File Explorer, as alternative file managers or copy handlers like Teracopy will fail). However, users have reported that it does work under Mac, and can be made to work under Linux _sometimes_. Details over on the [wiki page](https://github.com/Ralim/ts100/wiki/Upgrading-Firmware).
 
 1. Hold the button closest to the tip, and plug in the USB to the computer.
-2. The unit will appear as a USB drive.
+2. The unit will appear as a USB drive. ( Screen will say `DFU` on it.)
 3. Drag the .hex file onto the USB drive.
 4. The unit will disconnect and reconnect.
 5. The filename will have changed to end in .RDY or .ERR
@@ -35,8 +33,6 @@ Officially the bootloader on the iron only works under Windows (use the built-in
 7. If it didn't work the first time, try copying the file again without disconnecting the iron, often it will work on the second shot.
 8. Disconnect the USB and power up the iron. You're good to go.
 
-
-
 For the more adventurous out there, you can also load this firmware onto the device using an SWD programmer.
 
 On the bottom of the MCU riser PCB, there are 4 pads for programming. On v2.51A PCB revision `USB_D+` is shorted to `SWDIO` and `USB_D-` is shorted to `SWCLK` so debugging works without disassembly (attach while staying in the bootloader). Installing [dapboot from eDesignOSS](https://github.com/eDesignOSS/dapboot) (`make TARGET=TS100 -C src`) is recommended as it allows reliable flashing of binary files with [dfu-util](http://dfu-util.sourceforge.net/).
@@ -45,7 +41,6 @@ There is a complete device flash backup included in this repository. (Note this
 
 For the TS80 the SWD pins are used for the QC negotiation, so you can actually connect to the SWD power via the USB connector.
 
-
 # Mac
 
 sgr1ff1n (Shane) commented in [issue 11](https://github.com/Ralim/ts100/issues/11) that upgrading worked on their Mac as per normal:
@@ -56,22 +51,22 @@ sgr1ff1n (Shane) commented in [issue 11](https://github.com/Ralim/ts100/issues/1
 
 While in past there were reports of unreliable upgrades, the consensus in [issue 11](https://github.com/Ralim/ts100/issues/11) is that things work mostly as expected in Linux.
 
-@awigen has contributed a script [flash_ts100_linux.sh](https://raw.githubusercontent.com/Ralim/ts100/master/Flashing/flash_ts100_linux.sh) that works on Ubuntu 16.04 as well as other distro's.
+@awigen has contributed a script [flash_ts100_linux.sh](https://raw.githubusercontent.com/Ralim/ts100/master/Flashing/flash_ts100_linux.sh) that works on Ubuntu 16.04 as well as other distros.
 
 If you want to do it manually (or if the script does not work for some reason) the general procedure is the same as for Windows, the differences are in the way to mount the unit and copy the firmware.
 Remember that after flashing, the firmware filename will have changed to end in `.RDY` or `.ERR` or `.NOT` and only `.RDY` means the flashing was successful!
 
-* The unit has to be mounted as ```msdos``` type (thanks @balrog-kun for having spotted it). You may disable automount, but unmounting the automounted drive and remounting as `msdos` works fine.  You do not need to turn off automounting, but you do need to unmount the device with `umount`.
-* It is recommended to use an all-caps filename for the firmware, even if successful flashing were done with lower case names.
-* Avoid USB hubs, plug directly in your computer.
-* If it fails, try again several times without unplugging. Just let it remount.
+- The unit has to be mounted as `msdos` type (thanks @balrog-kun for having spotted it). You may disable automount, but unmounting the automounted drive and remounting as `msdos` works fine. You do not need to turn off automounting, but you do need to unmount the device with `umount`.
+- It is recommended to use an all-caps filename for the firmware, even if successful flashing were done with lower case names.
+- Avoid USB hubs, plug directly in your computer.
+- If it fails, try again several times without unplugging. Just let it remount.
 
 Example, to be run as root, once the unit has been plugged in DFU mode and auto-mounted:
 
 ```bash
 FW=ts100.hex
 unset NAME
-eval $(lsblk -P -p -d --output NAME,MODEL|grep "DFU Disk")
+eval $(lsblk -P -p -d --output NAME,MODEL|grep "DFU[ _]Disk")
 [ -z ${NAME+x} ] && exit 1  # Could not find DFU device
 umount "$NAME"
 mkdir /tmp/mntdfu
@@ -85,52 +80,62 @@ rmdir /tmp/mntdfu
 Device will reboot and automount will rerun if not disabled.
 Check the extension of your firmware, it should be `.RDY` now.
 
-
 ## Pinecil (Pine64)
 
 The MCU used in the Pinecil supports usb-dfu.
+
 To enter DFU mode, hold the button at the back of the iron while connecting to usb over usb-c.
 Generally all usb controllers work, but some hubs have issues so avoiding hubs may be best.
-Once the device is connected while holding the button, the screen will stay **off**.
-This is normal, and then you can use the appropriate tool to load the .hex or .bin file as per your OS. 
 
-You can also refer to the Pine64 [Wiki](https://wiki.pine64.org/wiki/Pinecil)
+Once the device is connected while holding the button, the screen will stay **off**.
+
+This is normal, and then you can use the appropriate tool to load the .hex or .bin file as per your OS.
+
+You can also refer to the Pine64 [Wiki](https://wiki.pine64.org/wiki/Pinecil).
 
 ### Linux and Mac
+
 Using `dfu-util` you can flash the firmware using a command line as such:
 
 ```
-dfu-util -d 28e9:0189 -a 0 -D Pinecil_EN.bin -s 0x08000000:mass-erase:force
+dfu-util -D Pinecil_EN.dfu
 ```
 
 ### Windows
 
-For windows the easiest tool to use is the vendors gui tool from [here](http://www.gd32mcu.com/download/down/document_id/176/path_type/1)
-Should the link break, its called "GD32 MCU Dfu Tool" and can be grabbed from http://www.gd32mcu.com/en/download/
+For windows the easiest tool to use is the vendors gui tool from [here](http://www.gd32mcu.com/download/down/document_id/176/path_type/1).
+
+Should the link break, its called "GD32 MCU Dfu Tool" and can be grabbed from http://www.gd32mcu.com/en/download/.
+
+You will also need the matching drivers from [here](http://www.gd32mcu.com/download/down/document_id/244/path_type/1) installed if you have not used gigadevice parts before.
+
+These are called "GD32 Dfu Drivers" if the link breaks.
+
+You can also use dfu-util if you wish to set it up, but that is better documented by others
 
 ### FAQ
 
 #### [Miniware] The file is showing up with the extension `.ERR`
 
-This can occur duing the programming process if any of the checks in the bootloader fail. This is often triggered by anti-virus software or using a non-windows host OS.
+This can occur during the programming process if any of the checks in the bootloader fail. This is often triggered by anti-virus software or using a non-windows host OS.
 
 First, try just copying the file a second time.
 
 1. Attach the iron in DFU mode
 2. Copy the hex file to the device
 3. The device disconnects and connects with the `.ERR` file
-4. Copy the same hex file again  **DO NOT TRY AND DELETE THE OLD ONE**
+4. Copy the same hex file again **DO NOT TRY AND DELETE THE OLD ONE**
 5. The device will disconnect and reconnect again
 6. The device _should_ now have the `.RDY` file
-7. Your done.
+7. You're done.
 
-If this fails, if you are on Mac or Linux reading the wiki page about programming can help. There is also a very long issue thread going through all of the different attempts around this too.
+If this fails and you are on Mac or Linux reading the wiki page about programming can help. There is also a very long issue thread going through all of the different attempts around this too.
 
-If you are on windows, its often to try another computer (friends, work, partners etc).
+If you are on windows, it's often best to try another computer (friends, work, partners etc).
 
 #### [Miniware] Device randomly disconnects or does not show up in DFU mode
 
-First, check the USB cable your using has the data pins; test it on another device. There are a surprisingly large number of usb-micro cables that are power _only_.
+First, check the USB cable you are using has the data pins; test it on another device. There are a surprisingly large number of usb-micro cables that are power _only_.
 
 Secondly, try other USB ports. Often different USB controllers will interact with the units differently due to design quirks in the miniware design.
 
@@ -142,4 +147,4 @@ This will **NOT** show up as a USB storage drive, but instead show up using a st
 To change to dapboot based alternative bootloader, you need to flash the hex file from [here](https://github.com/eDesignOSS/ts100-bl-flasher/releases).
 `ts100-stockbl.hex` will reflash the stock bootloader, `ts100-dapboot.hex` will flash the new dapboot based usb bootloader.
 
-Note that this is only reccomended for users who know what they doing. If you dont not understand how this works; please dont flash this.
+Note that this is only recommended for users who know what they are doing. If you don't understand how this works, please don't flash this.

Documentation/GettingStarted.md

@@ -0,0 +1,84 @@
+# Getting Started
+
+Getting started with Iron OS on your Pinecil/TS80/TS80P/TS100.
+If your device did not come with Iron OS already installed, or if you need to update to the latest version; please see the [Flashing Guide](/Documentation/Flashing.md).
+
+Once your Iron has been flashed, on first power on it _may_ warn you about the system settings being reset.
+_Do not panic_; this is 100% completely normal. This is here to note to you that they have been reset to handle the internal structure changing.
+
+If you receive a warning about the accelerometer or USB-PD not being detected, please see [here](/Documentation/HardwareIssues.md).
+
+## The Home screen (or idle screen)
+
+This is the landing page of the firmware, from here you can choose to either go into the [settings menu](#Settings-Menu) or go into [soldering mode](#Soldering-Mode).
+
+By default this will show a screen similar to the one below:
+
+![Home Screen](/Documentation/images/HomeScreen.png)
+
+Note that this may be drawn mirrored depending on the orientation of your screen.
+
+The soldering iron symbol on the screen will appear near the tip. This is here to indicate that pressing the button closest to the front of the soldering iron will enter soldering mode.
+
+And naturally, the spanner like icon represents that pressing the button near the rear of the soldering iron will enter the settings menu.
+
+In the settings, you can turn on an advanced idle screen instead. The buttons still function the same, however, the image will be swapped for a text telling you the current status of the iron with extra details.
+
+Depending on how your device is being powered, at one end of the screen, the firmware will either draw text to show you the current-voltage your unit is being provided with, a battery icon (if battery mode is enabled) or a power plug icon.
+
+If you see exclamation marks (!!!) where the soldering iron should be, this indicates that the firmware can't see the tip connected. This could indicate a problem with the iron or tip if there is one inserted. First, try removing and reinstalling the tip. If the issue persists please see the [hardware issues section](/Documentation/HardwareIssues.md).
+
+This screen features a burn-in protection feature, where if no buttons or movement have been detected for a while it will automatically blank the screen to try and reduce burn-in if the iron is left unattended. Any movement or button press will wake the screen.
+
+### Hidden Extras
+
+Additionally to the two icons shown, there are two "hidden" actions that can be performed on this menu.
+
+If you press and hold on to the button near the tip of the soldering iron, this will bring up the temperature adjustment screen. Normally this is not required; but if you would like to adjust the set temperature _before_ the tip starts to heat, this can be useful.
+
+If you press and hold the button near the rear of the iron it will take you into the [debug menu](/Documentation/DebugMenu.md).
+
+## Soldering Mode
+
+When you press the button to enter into the soldering mode, the iron will instantly start to heat up the tip.
+
+The firmware defaults to 320C as the set point for the soldering mode, however on this screen you can enter into the adjustment screen by pressing either button.
+
+Pressing and holding the button near the tip will enter **boost** mode. This allows temporarily overriding the set temperature to a higher (or lower) value. This can be useful as a way to force the tip to a higher temperature to drive more wattage into a large joint when the thermal connection is not ideal.
+
+Pressing and holding the rear button will exit soldering mode and land you back at the home screen. You can also do this by pressing both buttons at once and this will also work, this is a bit harder to do but is kept for compatibility with the Miniware firmware.
+
+Pressing and holding **both** buttons at once will enter locked mode, which will prevent the buttons from doing anything. You can in the settings allow boost mode in locked mode optionally. This can be useful if you find yourself hitting the buttons and entering into the temperature adjustment screen by accident.
+
+### Idle sleep
+
+If the iron detects a period of time without any significant movement, it will enter into a sleep mode. This is indicated with a graphic on the screen similar to ZZzz (or text in detailed mode).
+
+In this mode, the temperature of the iron will automatically reduce down to a temperature just below the melting point of the solder. This helps reduce the rate of oxidation and damage to the iron tip.
+
+Simply picking up or moving the iron will wake it back up into soldering mode. You can also press any button and this will also wake the iron up.
+
+The Pinecil has a footprint (unpopulated) on the PCB for a hall effect sensor (Si7210). If you fit this then iron will additionally force sleep when it detects a strong magnetic field near the tip of the plastic body. This allows attaching a strong magnet near your iron holder to ensure it always enters sleep.
+
+### Idle shutdown
+
+If, after entering sleep mode the iron still does not see movement for a much longer time; it will shut down and return to the home screen.
+
+## Settings Menu
+
+The settings menu is the most often evolving aspect of the firmware, so each option is not documented here. However, do not panic, as every menu option has a description so that you don't _need_ to come back here to figure them all out.
+
+To navigate the menu, the two buttons act separately.
+The button that you pressed to enter the menu (rear) cycles down the options, and the other button (front) will change the current option.
+
+To see a description of an option, just pause and wait and after a little bit, it will scroll across the screen.
+
+The menu is comprised of a "main menu" of categories and then sub-items that allows you to adjust parameters.
+
+You can long hold buttons to change through options faster, and there is some acceleration when holding the buttons.
+
+There is a small scrollbar that will be shown along the edge of the screen to indicate how far through the current list you are.
+
+Additionally, this scrollbar will blink rapidly when you are on the last item in a menu choice.
+
+I highly recommend taking a few minutes to go through all of the options in the menu to get a feel for what you can change, almost every aspect of the internal system is adjustable to suit you.

Documentation/Hardware.md

@@ -0,0 +1,8 @@
+## Notes on the various supported hardware
+
+### MHP30
+
+- Accelerometer is the MSA301, this is mounted roughly in the middle of the unit
+- USB-PD is using the FUSB302
+- The hardware I2C bus on PB6/7 is used for the MSA301 and FUSB302
+- The OLED is the same SSD1306 as everything else, but its on a bit-banged bus

Documentation/HardwareIssues.md

@@ -0,0 +1,28 @@
+# Hardware Issues
+
+While we would love everything to work perfectly, sometimes that just doesn't happen.
+Please do not email maintainers directly, these will generally be ignored.
+Keep issue discussions to GitHub issues or the discussions page so that the whole community can help and work together.
+
+## No Accelerometer detected
+
+If your iron was previously working, this could be a bug (and we are very sorry). Please check the currently open and recently closed issues to check if anyone else has run into this. You can try going back to a release on the firmware to test if this is a new issue before opening an issue.
+
+If this is a new iron, also feel free to open an issue if you don't see any; a vendor _could_ have changed the model of the accelerometer on us without warning _again_. In which case, support should come shortly.
+
+If your iron is new, there is a slim chance your accelerometer may be DOA and need replacement.
+
+**Note this warning will only be shown the first few times until settings are reset**
+
+## No USB-PD IC detected
+
+Generally, this means either something went very awry in the firmware or the chip is not answering as would normally be expected. Try rolling back to an earlier release to confirm if the issue still persists then the device may need repair. If you have some form of seller protection/support you most likely want to reach out to this to be safe. If you don't, you can always attempt to replace the IC yourself. As of writing both the TS80P and Pinecil use the FUSB302.
+
+**Note this warning will only be shown the first few times until settings are reset**
+
+## No tip detected
+
+if your tip is not being detected, the most likely cause is that the heater element has been damaged from over-temperature, being dropped or bad luck. As the heater coil is part of the temperature measurement circuit neither will work if it's damaged.
+
+The best way to see if this is the case is to measure the resistance across the contacts to the tip using a multimeter.
+you are expecting to see measurements in the range of 4-10 ohms. Anything higher than 10 ohms is _generally_ an issue.

Documentation/History.md

@@ -1,176 +1,231 @@
 # Version Changes
 
+## V2.16
+
+* Overhaul of the Timer+ADC setup with help from @sandmanRO
+* Overhaul of the PID with help from @sandmanRO
+* Settings _should_ now upgrade in place to future versions, with resets only happening to new/changed settings
+* Shows error if tip runaway (failed temperature sensor) is detected
+* USB-PD now has a timeout, to allow forcing QC3 negotiation to start faster
+* QC3 Voltages are now adjustable to user desired setpoint
+* Added a small tolerance to allow "overvoltage" on QC3 above unit specifications.
+* * Please note: Doing this is entirely at your own risk!
+* New Advanced view that is much nicer to use and a very good daily driver option from @Mel-kior
+* OLED brightness and contrast thanks to @alvinhochun
+* Scrollbar is fixed so it doesnt jump around when menus are shown/hidden
+* Moved to `.dfu` files from `.bin` to make flashing commands easier
+* Every language had translation updates I believe
+* Romanian language added
+
+
+## V2.15
+
+
+## Feature upgrades:
+
+* MHP30 support
+* Multi-lingual firmware combinations now exist for Pinecil
+* More fine grained voltage controlled options
+* USB-PD improvements (version one and two)
+* More configuration options for power pulse
+* All font / character encoding has been very reworked
+* More translation updates than one can count 
+* More languages 😱 
+
+### MHP30
+
+The MHP30 is a small reflow station from Miniware.
+Thanks to a massive amount of help from @g3gg0 this firmware brings the beginnings of support for this unit.
+Also kudo's to @Vinigas  and @GoJian for helping with testing.
+This is not a _final_ version I'm sure, but this is a working, usable version of firmware support.
+Programs the same as any one Miniware unit using drag and drop.
+**Note: The boot logo scripts will need updates for this unit, so not supported yet.**
+
+The flood doors are now open for feature requests for this unit :)
+
+## V2.14
+
+- Fixing auto rotation bug in the LIS accelerometer in the TS80/TS80P
+- Adds support for two new accelerometers
+  -- SC7A20 (Future Pinecil batch) #786
+  -- MSA301 (Newer TS80P) #761
+- Add warnings if accelerometer or USB-PD IC's are not detected #752
+  -- Only shows for first few boots, to help catch unsupported models
+- Fixed cooling down blink to be sane speed #769
+- Cleanup of threads and slightly faster power negotiation #790
+
+- Updates to flashing scripts #775
+- Documentation updates all over the place (and the wiki was given a cleanup)|
+- Updates to makefile #792 #787
+- Cleanup the folder name of the source code #800
+- clang-format spec setup #801
+
 ## V2.13
 
-* First _official_ Pinecil release
-* All of the wire for Pinecil releases added
-* Updated Translations
-* Delay accelerometer to help with entering sleep on startup
-* Dual speed PWM to help with power limit control
-* Improve heat up time
-* Adds locking mode
-* Improved docs all over the place
-* Repo rename occured TS100 -> IronOS
-* Hall effect sensor support added (not fitted in Pinecil but optional)
-* QC 20V support for Pinecil
-* CI upgrades for faster builds
-* Fixed bug with accelerometer model on Pinecil
-* Rework of all of the temperature curves for better accuracy
-
-
+- First _official_ Pinecil release
+- All of the wire for Pinecil releases added
+- Updated Translations
+- Delay accelerometer to help with entering sleep on startup
+- Dual speed PWM to help with power limit control
+- Improve heat up time
+- Adds locking mode
+- Improved docs all over the place
+- Repo rename occured TS100 -> IronOS
+- Hall effect sensor support added (not fitted in Pinecil but optional)
+- QC 20V support for Pinecil
+- CI upgrades for faster builds
+- Fixed bug with accelerometer model on Pinecil
+- Rework of all of the temperature curves for better accuracy
 
 ## V2.12
 
-* Only released as pre-release
-* [TS80P] Improvements to the PD negotiation to handle a few more adapters cleanly
-* Pause on the last item in a list
-* Clean up the menu (removed both enables and settings, so that you can turn things off easier)
-* Removing the very old single line menu style.
-
+- Only released as pre-release
+- [TS80P] Improvements to the PD negotiation to handle a few more adapters cleanly
+- Pause on the last item in a list
+- Clean up the menu (removed both enables and settings, so that you can turn things off easier)
+- Removing the very old single line menu style.
 
 ## V2.11
 
-* First TS80P support
-* Added in a USB-PD driver stack for the FUSB302
-* Fixed some graphical glitches
+- First TS80P support
+- Added in a USB-PD driver stack for the FUSB302
+- Fixed some graphical glitches
 
 ## V2.10
 
-* GUI polish (animations and scroll bars)
-* Power pulse to keep power supplies alive
-* Adjustable tip response gain
+- GUI polish (animations and scroll bars)
+- Power pulse to keep power supplies alive
+- Adjustable tip response gain
 
 ## V2.09
 
-* Adjustable steps in temperature adjustment
-* Git hash now in build string
-* Adjustable language to set if US units are available or not
-* Some minor QC3 improvements
+- Adjustable steps in temperature adjustment
+- Git hash now in build string
+- Adjustable language to set if US units are available or not
+- Some minor QC3 improvements
 
 ## V2.08
 
-* Fixes auto start in sleep mode
-* Power limiters
+- Fixes auto start in sleep mode
+- Power limiters
 
 ## V2.07
 
-* QC fixes 
-* Cosmetic fixes for leading 0's
+- QC fixes
+- Cosmetic fixes for leading 0's
 
 ## V2.06
 
-* Warning on settings reset
-* Temp temp re-write
-* Display calibration offset
-* Hide some leading 0's
-* Menu timeouts
+- Warning on settings reset
+- Temp temp re-write
+- Display calibration offset
+- Hide some leading 0's
+- Menu timeouts
 
 ## V2.05
 
-* Language updates
-
+- Language updates
 
 ## V2.04
 
-* GUI updates
+- GUI updates
 
 ## V2.03
 
-* Support for new accelerometers
+- Support for new accelerometers
 
 ## V2.02
 
-* Adds small font
+- Adds small font
 
 ## V2.01
 
-* Newer settings menu
+- Newer settings menu
 
 ## V2.00
 
-* Complete re-write of the low layer system to use the STM32 HAL for easier development
-* This allowed easier setup for the new ADC auto measuring system
-* Better tip PWM control
-* Moved to FreeRTOS for scheduling
-* Complete re-write from blank
-* Added detailed screen views
-* Added smaller font for said screen views
-
+- Complete re-write of the low layer system to use the STM32 HAL for easier development
+- This allowed easier setup for the new ADC auto measuring system
+- Better tip PWM control
+- Moved to FreeRTOS for scheduling
+- Complete re-write from blank
+- Added detailed screen views
+- Added smaller font for said screen views
 
 ## V1.17
 
-* Added blinking cooldown display
-* Allowed smaller sleep timeout values
-* New font!
-* Automatic startup option
+- Added blinking cooldown display
+- Allowed smaller sleep timeout values
+- New font!
+- Automatic startup option
 
 ## V1.16
 
-* Added automatic rotation support
-* Added power display graph
+- Added automatic rotation support
+- Added power display graph
 
 ## V1.15
 
-* Added support for a custom bootup logo to be programmed via the DFU bootloader
+- Added support for a custom bootup logo to be programmed via the DFU bootloader
 
 ## V1.14
 
-* Changed input voltage cutoff to be based on cell count rather than voltage
+- Changed input voltage cutoff to be based on cell count rather than voltage
 
 ## V1.13
 
-* Swapped buttons for menu to prevent accidentally changing first menu item
-* Added auto key repeat
+- Swapped buttons for menu to prevent accidentally changing first menu item
+- Added auto key repeat
 
 ## V1.12
 
-* Increases sensitivity options to be 1*9 with 0 off state
-* Fixes issue where going from COOL *> soldering can leave screen off
+- Increases sensitivity options to be 1\*9 with 0 off state
+- Fixes issue where going from COOL \*> soldering can leave screen off
 
 ## V1.11
 
-* Boost mode
-* Change sensitivity options to be 1*8
+- Boost mode
+- Change sensitivity options to be 1\*8
 
 ## V1.10
 
-* Adds help text to settings
-* Improves settings for the display update rate
+- Adds help text to settings
+- Improves settings for the display update rate
 
 ## V1.09
 
-* Adds display modes, for slowing down or simplifying the display
+- Adds display modes, for slowing down or simplifying the display
 
 ## V1.08
 
-* Fix settings menu not showing flip display
+- Fix settings menu not showing flip display
 
 ## V1.07
 
-* Adds shutdown time to automatically shutdown the iron after inactivity
+- Adds shutdown time to automatically shutdown the iron after inactivity
 
 ## V1.06
 
-* Changes H and C when the iron is heating to the minidso chevron like images
+- Changes H and C when the iron is heating to the minidso chevron like images
 
 ## V1.05
 
-* Adds ability to calibrate the input voltage measurement
+- Adds ability to calibrate the input voltage measurement
 
 ## V1.04
 
-* Increased accuracy of the temperature control
-* Improved PID response slightly
-* Allows temperature offset calibration
-* Nicer idle screen
+- Increased accuracy of the temperature control
+- Improved PID response slightly
+- Allows temperature offset calibration
+- Nicer idle screen
 
 ## V1.03
 
-* Improved Button handling
-* Ability to set motion sensitivity
-* DC voltmeter page shows input voltage
+- Improved Button handling
+- Ability to set motion sensitivity
+- DC voltmeter page shows input voltage
 
 ## V1.02
 
-* Adds hold both buttons on IDLE to access the therometer mode
-* Changes the exit soldering mode to be holding both buttons (Like original firmware)
+- Adds hold both buttons on IDLE to access the therometer mode
+- Changes the exit soldering mode to be holding both buttons (Like original firmware)

Documentation/Logo.md

@@ -34,7 +34,7 @@ To flash the logo, use the following steps:
 
  - `python3 img2ts100.py input.png logo.hex`
  - `riscv-nuclei-elf-objcopy -I ihex -O binary logo.hex logo.bin`
- - `dfu-util -d 28e9:0189 -a 0 -D logo.bin -s 0x0800f800`
+ - `dfu-util -d 28e9:0189 -a 0 -D logo.bin -s 0x0801F800`
 
  This will use the objcopy tool to convert the hex to a binary file, and then use dfu-util to flash it in the right location.
  If you do not have `riscv-nuclei-elf-objcopy` installed, you can generally use any objcopy tool from any toolchain you do have.

Documentation/Menu.md

@@ -17,7 +17,7 @@ Note that settings are not saved until you exit the menu.
 If you leave the unit alone (ie don't press any buttons) on a setting, after 3 seconds the screen will scroll a rough description of the setting.
 
 The menu is arranged so that the most often used settings are first.
-With submenu's being selected to enter using the front button (as if you were going to change the setting).
+With submenus being selected to enter using the front button (as if you were going to change the setting).
 Scrolling through the submenu will return you back to its entry location after you scroll through all of the options.
 
 ### Calibrating input voltage
@@ -34,7 +34,7 @@ To calibrate your iron:
 4. Under the advanced submenu
 5. Select the calibrate voltage option
 6. Use the front and back buttons to adjust the displayed voltage to minimize the error to your original measurement
-7. Hold both buttons to save and exit to the menu
+7. Press both buttons at the same time to save and exit to the menu
 
 ### Calibrating tip offset (Set tip model)
 
@@ -48,7 +48,7 @@ Some tips will have an offset on their readings, to calibrate this out perform t
 6. The display will start to scroll a warning message to check that the tip is at ambient temperature!
 7. Press the button near the tip of the iron to confirm
 8. The display will go to "...." for a short period of time as the unit measures the tip temperature and the handle temperature and compares them
-9. The display will then go back to *TMP CAL* and it will display a number, this is your offset number. You generally dont need it unless debugging issues
+9. The display will then go back to *TMP CAL* and it will display a number, this is your offset number. You generally don't need it unless debugging issues
 10. Calibration is done, just exit the settings menu as normal
 11. You're done, enjoy your iron!
 

Documentation/Power.md

@@ -2,7 +2,7 @@
 
 All of the irons are PWM controlled resistive heating elements.
 This means that the electronics in the handle can only turn the heating element on and off.
-This *means* that the power proivded in the tip is 100% controlled by the supply voltage used.
+This *means* that the power provided in the tip is 100% controlled by the supply voltage used.
 
 Both irons at their simplest are just a resistor connected to your power source via a switch.
 

ISSUE_TEMPLATE.md

@@ -1,31 +0,0 @@
-Please edit this template and fill out all the information you can (where relevant). Failure to provide essential information can delay the response you receive.
-
-_This is a [Bug/Feature Request/Question/Complaint]_
-
-* **I have**
-  - [ ] Searched previous issues 
-  - [ ] This is in _this_ firmware, not vendor "offical" firmware
-  - [ ] This is not a bug in the vendor bootloader (aka DFU)
-  - [ ] I have checked this is not already covered in the docs in `/Documentation`
-
-* **What is the current behavior?**
-
-* **What is the expected behavior?**
-
-***Steps to reproduce the bug:***
-
-- Turn on...
-- Hold....
-
-* **What is the motivation / use case for changing the behavior?**
-
-
-
-* **What are you running:**
-
-On the idle screen, you can hold the settings button and it will show you the firmware & PCB version.
-If using a USB-C supply please note model number
-
-  - Firmware Version: 2.x?
-  - PCB Version: (1/2)
-  - Power Supply (Voltage and Current Rating) :

LICENSE_RELEASE.md

@@ -0,0 +1,212 @@
+This document outlines the license of IronOS and its dependencies.
+
+- IronOS: GPL-3.0-only
+- FreeRTOS Kernel: MIT
+- FUSB302 driver: Apache-2.0
+- CMSIS + STM32F1xx HAL driver: BSD-3-Clause
+- NMSIS: Apache-2.0
+- GD32VF103 board files: BSD-3-Clause
+- WenQuanYi Bitmap Song font: GPL-2.0-or-later
+- BriefLZ compression library: Zlib
+
+The source code of IronOS can be obtained on the [IronOS GitHub repo][gh].
+
+[gh]: https://github.com/Ralim/IronOS
+
+
+IronOS
+---
+
+Copyright (c) 2016-2020 Ben V. Brown and contributors
+
+For the license text, see `LICENSE` file.
+
+
+FreeRTOS Kernel
+---
+
+```
+Copyright (C) 2020 Amazon.com, Inc. or its affiliates.  All Rights Reserved.
+
+Permission is hereby granted, free of charge, to any person obtaining a copy of
+this software and associated documentation files (the "Software"), to deal in
+the Software without restriction, including without limitation the rights to
+use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
+the Software, and to permit persons to whom the Software is furnished to do so,
+subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in al
+copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITN
+FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS O
+COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHE
+IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+```
+
+
+FUSB302 driver
+---
+
+```
+PD Buddy Firmware Library - USB Power Delivery for everyone
+Copyright 2017-2018 Clayton G. Hobbs
+
+Licensed under the Apache License, Version 2.0 (the "License");
+you may not use this file except in compliance with the License.
+You may obtain a copy of the License at
+
+    http://www.apache.org/licenses/LICENSE-2.0
+
+Unless required by applicable law or agreed to in writing, software
+distributed under the License is distributed on an "AS IS" BASIS,
+WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+See the License for the specific language governing permissions and
+limitations under the License.
+```
+
+
+CMSIS + STM32F1xx HAL driver
+---
+
+* Only applies to TS100, TS80 and TS80P releases.
+
+```
+COPYRIGHT(c) 2017 STMicroelectronics
+
+Redistribution and use in source and binary forms, with or without dification,
+are permitted provided that the following conditions are met:
+  1. Redistributions of source code must retain the above copyright notice,
+     this list of conditions and the following disclaimer.
+  2. Redistributions in binary form must reproduce the above copyright notice,
+     this list of conditions and the following disclaimer in the documentation
+     and/or other materials provided with the distribution.
+  3. Neither the name of STMicroelectronics nor the names of its contributors
+     may be used to endorse or promote products derived from this software
+     without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+```
+
+
+NMSIS
+---
+
+* Only applies to Pinecil releases.
+
+```
+Copyright (c) 2019 Nuclei Limited. All rights reserved.
+
+SPDX-License-Identifier: Apache-2.0
+
+Licensed under the Apache License, Version 2.0 (the License); you may
+not use this file except in compliance with the License.
+You may obtain a copy of the License at
+
+www.apache.org/licenses/LICENSE-2.0
+
+Unless required by applicable law or agreed to in writing, software
+distributed under the License is distributed on an AS IS BASIS, WITHOUT
+WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+See the License for the specific language governing permissions and
+limitations under the License.
+```
+
+GD32VF103 board files
+---
+
+* Only applies to Pinecil releases.
+
+```
+Copyright (c) 2019, GigaDevice Semiconductor Inc.
+
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+1. Redistributions of source code must retain the above copyright notice, this
+    list of conditions and the following disclaimer.
+2. Redistributions in binary form must reproduce the above copyright notice,
+    this list of conditions and the following disclaimer in the documentation
+    and/or other materials provided with the distribution.
+3. Neither the name of the copyright holder nor the names of its contributors
+    may be used to endorse or promote products derived from this software without
+    specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
+INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
+OF SUCH DAMAGE.
+```
+
+
+WenQuanYi Bitmap Song font
+---
+
+* Only applies to CJK (Chinese, Japanese and Korean) language releases.
+
+```
+Copyright (c) 2004-2010, The WenQuanYi Project 
+              Board of Trustees and Qianqian Fang
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+```
+
+
+BriefLZ compression library
+---
+
+* Only applies to multi-language builds.
+
+```
+The zlib License (Zlib)
+
+Copyright (c) 2002-2020 Joergen Ibsen
+
+This software is provided 'as-is', without any express or implied
+warranty. In no event will the authors be held liable for any damages
+arising from the use of this software.
+
+Permission is granted to anyone to use this software for any purpose,
+including commercial applications, and to alter it and redistribute it
+freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must
+     not claim that you wrote the original software. If you use this
+     software in a product, an acknowledgment in the product
+     documentation would be appreciated but is not required.
+
+  2. Altered source versions must be plainly marked as such, and must
+     not be misrepresented as being the original software.
+
+  3. This notice may not be removed or altered from any source
+     distribution.
+```

PULL_REQUEST_TEMPLATE.md

@@ -1,17 +1,17 @@
 
-Please try and fill out this template where possible, not all fields are required and can be removed.
+<!-- Please try and fill out this template where possible, not all fields are required and can be removed. -->
 
 * **Please check if the PR fulfills these requirements**
 - [] The changes have been tested locally
 - [] There are no breaking changes
 
 * **What kind of change does this PR introduce?**
-(Bug fix, feature, docs update, ...)
+<!-- (Bug fix, feature, docs update, ...) -->
 
 
 
 * **What is the current behavior?**
-(You can also link to an open issue here)
+<!-- (You can also just link to an open issue here) -->
 
 * **What is the new behavior (if this is a feature change)?**
 

README.md

@@ -4,55 +4,56 @@
 
 # IronOS - Flexible Soldering iron control Firmware
 
-*This repository was formerly known as TS100, its the same great code. Just with more supported devices*
+_This repository was formerly known as TS100, it's the same great code. Just with more supported devices_
 
-Originally concieved as an alternative firmware for the TS100, this firmware has evolved into a complex soldering iron control firmware.
+Originally conceived as an alternative firmware for the TS100, this firmware has evolved into a complex soldering iron control firmware.
 
 The firmware implements all of the standard features of a "smart" soldering iron, with lots of little extras and tweaks.
-I highly reccomend reading the installation guide fully when installing on your iron. And after install just explore the settings menu.
+I highly recommend reading the installation guide fully when installing on your iron. And after install just explore the settings menu.
 
 For soldering irons that are designed to be powered by "smart" power sources (QC and PD), the firmware supports settings around the negotiated power and voltage.
 For soldering irons that are designed to be powered by batteries (TS100), settings for a cutoff voltage for battery protection are supported.
 
 There are 25 languages currently supported as of present. When downloading the firmware for your soldering iron take note of the language code in the file name.
 
-This project is considered feature complete for use as a soldering iron, *so please suggest any feature improvements you would like!*
+This project is considered feature complete for use as a soldering iron, _so please suggest any feature improvements you would like!_
 
-*This firmware does **NOT** support the USB port while running for changing settings. This is done through the onscreen menu only. Logos are edited using the tool or python script and uploaded in DFU mode.*
+_This firmware does **NOT** support the USB port while running for changing settings. This is done through the onscreen menu only. Logos are edited using the tool or python script and uploaded in DFU mode._
 
+To get started with this firmware, please jump over to [here](Documentation/GettingStarted.md)
 
 ## Key Features
 
-* PID style iron temperature control
-* Automatic sleep with selectable sensitivity
-* Motion wake support
-* All settings exposed in intuitive menu
-* (TS100) Set a voltage lower limit for Lithium batteries so you don't kill your battery pack
-* (TS80) Set 18W or 24W settings for your power bank
-* (TS80P) Automatically negotiates appropriate PD and falls back to QC mode like TS80
-* (Pinecil) Supports all 3 power modes (PD,QC, DC In).
-* Improved readability Fonts, supporting multiple languages
-* Use hardware features to improve reliability
-* Can disable movement detection if desired
-* Boost mode lets you temporarily change the temperature when soldering (i.e. raise the temperature for short periods of time)
-* (TS100/Pinecil) Battery charge level indicator if power source set to a lipo cell count
-* (TS80/TS80P/Pinecil) Power bank operating voltage is displayed
-* [Custom boot up logo support](Documentation/Logo.md)
-* Automatic LCD rotation based on the orientation
+- PID style iron temperature control
+- Automatic sleep with selectable sensitivity
+- Motion wake support
+- All settings exposed in the intuitive menu
+- (TS100) Set a voltage lower limit for Lithium batteries so you don't kill your battery pack
+- (TS80) Set 18W or 24W settings for your power bank
+- (TS80P) Automatically negotiates appropriate PD and falls back to QC mode like TS80
+- (Pinecil) Supports all 3 power modes (PD, QC, DC In).
+- Improved readability Fonts, supporting multiple languages
+- Use hardware features to improve reliability
+- Can disable movement detection if desired
+- Boost mode lets you temporarily change the temperature when soldering (i.e. raise the temperature for short periods)
+- (TS100/Pinecil) Battery charge level indicator if power source set to a lipo cell count
+- (TS80/TS80P/Pinecil) Power bank operating voltage is displayed
+- [Custom boot up logo support](Documentation/Logo.md)
+- Automatic LCD rotation based on the orientation
 
 ## Installation
 
-For installation for your device, please refer to the [Flashing Guide](Documentation/Flashing.md).
+For notes on installation for your device, please refer to the [Flashing Guide](Documentation/Flashing.md).
 
 ## Menu System
 
 This new firmware uses a new menu system to allow access to the settings on the device.
-When on the main screen, the unit shows prompts for the two most common operations.
+When on the main screen, the unit shows a pair of prompts for the two most common operations.
 
-* Pressing the button near the tip enters soldering mode
-* Pressing the button near the USB enters the settings menu
-* Holding the button near the tip will enter soldering temperature adjust mode (This is the same as the one in the soldering menu, just to let you edit before heating up)
-* Holding the button near the USB end will show the [debug menu](Documentation/DebugMenu.md)
+- Pressing the button near the tip enters the soldering mode
+- Pressing the button near the USB enters the settings menu
+- Holding the button near the tip will enter soldering temperature adjust mode (This is the same as the one in the soldering menu, just to let you edit before heating up)
+- Holding the button near the USB end will show the [debug menu](Documentation/DebugMenu.md)
 
 Detailed operation details are over in the [Menu information.](Documentation/Menu.md)
 
@@ -63,19 +64,19 @@ I also want to give a shout out to all of the [Fantastic Contributors](https://g
 
 Especially to the following users, who have helped in various ways that are massively appreciated:
 
-* [Dhiltonp](https://github.com/dhiltonp)
-* [Mrkvozrout](https://github.com/Mrkvozrout)
-* [JonnieZG](https://github.com/jonnieZG)
-* [Federck](https://github.com/federck)
-* [Jvitkauskas](https://github.com/jvitkauskas)
-* [Doegox](https://github.com/doegox)
-* [Perillamint](https://github.com/perillamint)
-* [GeminiServer](https://github.com/GeminiServer)
-* [Patrick Horlebein](https://github.com/PixelPirate)
-* [Firebie](https://github.com/Firebie)
-* [Agatti](https://github.com/agatti)
-* [Discip](https://github.com/discip)
-* [Paul Fertser](https://github.com/paulfertser)
+- [Dhiltonp](https://github.com/dhiltonp)
+- [Mrkvozrout](https://github.com/Mrkvozrout)
+- [JonnieZG](https://github.com/jonnieZG)
+- [Federck](https://github.com/federck)
+- [Jvitkauskas](https://github.com/jvitkauskas)
+- [Doegox](https://github.com/doegox)
+- [Perillamint](https://github.com/perillamint)
+- [GeminiServer](https://github.com/GeminiServer)
+- [Patrick Horlebein](https://github.com/PixelPirate)
+- [Firebie](https://github.com/Firebie)
+- [Agatti](https://github.com/agatti)
+- [Discip](https://github.com/discip)
+- [Paul Fertser](https://github.com/paulfertser)
 
 Plus the huge number of people who have contributed translations, your effort is massively appreciated.
 
@@ -86,6 +87,6 @@ Other components such as FreeRTOS/USB-PD have their own licence.
 
 ## Commercial Use
 
-This software is provided as-is, so I cannot provide any commercial support for the firmware. 
-However, you are more than welcome to distribute links to the firmware, or provide irons with this software on them.
+This software is provided as-is, so I cannot provide any commercial support for the firmware.
+However, you are more than welcome to distribute links to the firmware or provide irons with this software on them.
 Please do not re-host the files, but rather link to this page, so that there are no old versions of the firmware scattered around.

SECURITY.md

@@ -0,0 +1,18 @@
+# Security Policy
+
+## Supported Versions
+
+Use this section to tell people about which versions of your project are
+currently being supported with security updates.
+
+| Version | Supported          |
+| ------- | ------------------ |
+| Latest Release   | :white_check_mark: |
+| master   | :white_check_mark:                |
+
+## Reporting a Vulnerability
+
+1. Report in an issue please and tag @ralim
+2. All issues are read within 1 working week in general; often within 24 hours
+3. Issue shall recieve a comment within 14 days; but goal is < 2.
+4. Issue will be open until the vulnerability is closed in all supported versions

Translations/BitmapEditor.html

@@ -141,10 +141,36 @@
 				}
 			}
 		}
+		stringFromMatrix(true, false);
+	}
+	
+	function escapedToMatrix(str) {
+		app.encodedEscapeSequence = str;
+		clearMatrix();
+		var strs = str.split("\\x");
+		var c = 0;
+		var rs = 7;
+		for (var i = 0; i<strs.length; i++) {
+			var d = strs[i];
+			if (d.length > 0) {
+				v = parseInt(d, 16);
+				sv = padLeft(v.toString(2), "0", 8);
+				for (r = 0; r < 8; r++) {
+					paint(getCell(rs - r, c), sv.charAt(r) == '1');
+				}
+				c++;
+				if (c >= app.matrix.cols) {
+					c = 0;
+					rs += 8;
+				}
+			}
+		}
+		stringFromMatrix(false, true);
 	}
 
-	function stringFromMatrix() {
+	function stringFromMatrix(skipEncodedData, skipEncodedEscapeSequence) {
 		var str = "";
+		var strEscaped = "";
 		var delim = "";
 		var blocks = app.matrix.rows / 8;
 		var rs = 7;
@@ -158,11 +184,17 @@
 					}
 				}
 				str += delim + "0x" + padLeft(b.toString(16).toUpperCase(), "0", 2);
+				strEscaped += "\\x" + padLeft(b.toString(16).toUpperCase(), "0", 2);
 				delim = ",";
 			}
 			rs += 8;
 		}
-		app.encodedData = str;
+		if (!skipEncodedData) {
+			app.encodedData = str;
+		}
+		if (!skipEncodedEscapeSequence) {
+			app.encodedEscapeSequence = strEscaped;
+		}
 		return str;
 	}
 	
@@ -175,12 +207,16 @@
 					rows: 16
 				},
 				type: "big",
-				encodedData: ""
+				encodedData: "",
+				encodedEscapeSequence: "",
 			},
 			methods : {
 				VtoMatrix : function(val) {
 					toMatrix(val);
 				},
+				escapedToMatrix : function(val) {
+					escapedToMatrix(val);
+				},
 				
 				VchangeSize : function() {
 					if (app.type == "big") {
@@ -236,10 +272,11 @@
 			<input type="button" value="Clear" onclick="clearMatrix();stringFromMatrix()">
 		</div>
 		<div class="data">
-			<textarea v-model="encodedData" style="width:100%" v-on:change="VtoMatrix(encodedData)" rows=5>
+			<textarea v-model="encodedData" style="width:100%" v-on:change="VtoMatrix(encodedData)" rows=5></textarea>
+			<textarea v-model="encodedEscapeSequence" style="width:100%" v-on:change="escapedToMatrix(encodedEscapeSequence)" rows=5></textarea>
 		</div>
 	</div>
 		
 	
 </body>
-</html>
+</html>

Translations/README.md

@@ -0,0 +1,11 @@
+### CJK Notes
+
+Unlike Latin and Cyrillic scripts, CJK Unified Ideographs cannot be legibly
+displayed using the small font, which is only 6x8px in size. Therefore, Hanzi,
+Kanji and Hanja can only be displayed using the 12x16px large font.
+
+By default, menu items are shown using two lines of text with the small font.
+When translating such items for CJK, leave the first line empty and put the
+translated text on the second line. This way, the firmware will automatically
+know to display the text using the large font. This also applies to the
+`SettingsResetMessage` text -- just start the message with `\n`.

Translations/TranslationEditor.html

@@ -3,7 +3,7 @@
 
 	<head>
 		<meta charset="UTF-8">
-		<title>TS100 Translation Editor</title>
+		<title>IronOS Translation Editor</title>
 
 		<script src="https://cdn.jsdelivr.net/npm/vue/dist/vue.js"></script>
 		<script src="translations_commons.js"></script>
@@ -48,8 +48,8 @@
 			} else if (id == "current-lang-file") {
 				if (checkTranslationFile(file.name)) {
 					app.current = json;
-					if (!app.current.cyrillicGlyphs){
-						app.current.cyrillicGlyphs = false;
+					if (!app.current.fonts){
+						app.current.fonts = ["ascii_basic"];
 					}
 					app.meta.currentLoaded = true;
 				}
@@ -137,6 +137,7 @@
 					loaded: false,
 				},
 				obsolete : {},
+				fontToAdd: "latin_extended",
 			},
 			methods : {
 				validateInput: function(valMap, id, mode) {
@@ -191,11 +192,75 @@
 						delim = " and ";
 					}
 					return str;
-				}
+				},
+
+				getWholeScreenMessageMaxLen: function(valMap, id, prop) {
+					var v = prop ? valMap[id][prop] : valMap[id];
+					var maxLen;
+					if (this.isSmall(v)) {
+						maxLen = defMap[id].maxLen2 || 16;
+					} else {
+						maxLen = defMap[id].maxLen || 8;
+					}
+					return maxLen;
+				},
+
+				validateWholeScreenMessage: function(valMap, id, prop) {
+					var v = prop ? valMap[id][prop] : valMap[id];
+					var maxLen = this.getWholeScreenMessageMaxLen(valMap, id, prop);
+					if (this.isSmall(v)) {
+						if (v[0].length === 0) {
+							return "invalid";
+						} else if (Math.max(v[0].length, v[1].length) > maxLen) {
+							return "invalid";
+						}
+					} else {
+						if (v.length > maxLen) {
+							return "invalid";
+						}
+					}
+				},
+
+				constraintWholeScreenMessage: function(valMap, id, prop) {
+					return "len <= " + this.getWholeScreenMessageMaxLen(valMap, id, prop);
+				},
+
+				isSmall: function(v) {
+					return v instanceof Array;
+				},
+
+				convertToLarge: function(valMap, id, prop) {
+					var v = prop ? valMap[id][prop] : valMap[id];
+					var message = v[0] + (v[1] !== "" ? " " + v[1] : "");
+					if (prop) {
+						valMap[id][prop] = message;
+					} else {
+						valMap[id] = message;
+					}
+				},
+
+				convertToSmall: function(valMap, id, prop) {
+					var v = prop ? valMap[id][prop] : valMap[id];
+					var message = [ v, "" ];
+					if (prop) {
+						valMap[id][prop] = message;
+					} else {
+						valMap[id] = message;
+					}
+				},
+
+				removeFont: function(i) {
+					this.current.fonts.splice(i, 1);
+				},
+
+				addFont: function() {
+					this.current.fonts.push(this.fontToAdd);
+				},
 			}
 		});
 		app.def = def;
 		copyArrayToMap(app.def.messages, defMap);
+		copyArrayToMap(app.def.messagesWarn, defMap);
 		copyArrayToMap(app.def.characters, defMap);
 		copyArrayToMap(app.def.menuGroups, defMap);
 		copyArrayToMap(app.def.menuOptions, defMap);
@@ -208,7 +273,7 @@
 	<body>
 
 		<div id="app">
-			<h1>TS100 Translation Editor<span v-if="meta.currentLoaded"> - {{ current.languageLocalName }} [{{current.languageCode}}]</span></h1>
+			<h1>IronOS Translation Editor<span v-if="meta.currentLoaded"> - {{ current.languageLocalName }} [{{current.languageCode}}]</span></h1>
 			<table class="header data">
 				<tr>
 					<td class="label">Referent Language</td>
@@ -233,12 +298,20 @@
 					<td class="value"><input type="text" v-model="current.languageLocalName" class="short"></td>
 				</tr>
 				<tr v-if="meta.currentLoaded">
-					<td class="label">Font table to use</td>
+					<td class="label">Font tables to use<br>("ascii_basic" must be first)</td>
 					<td class="value">
-						<select v-model="current.cyrillicGlyphs" v-on:change="current.cyrillicGlyphs = current.cyrillicGlyphs=='true'">
-							<option value="false">Latin Extended</option>
-							<option value="true">Cyrillic Glyphs</option>
+						<ul>
+							<li v-for="(font, i) in current.fonts">
+								<button type="button" @click="removeFont(i)" :disabled="i == 0 && font == 'ascii_basic'">-</button> {{ font }}
+							</li>
+						</ul>
+						<select v-model="fontToAdd">
+							<!-- <option value="ascii_basic">ascii_basic: ASCII Basic</option> -->
+							<option value="latin_extended">latin_extended: Latin Extended</option>
+							<option value="cyrillic">cyrillic: Cyrillic Glyphs</option>
+							<option value="cjk">cjk: Chinese/Japanese/Korean</option>
 						</select>
+						<button type="button" @click="addFont()">Add</button>
 					</td>
 				</tr>
 			</table>
@@ -273,6 +346,27 @@
 					</tr>
 				</table>
 
+				<h2>Warning Messages</h2>
+				<table class="data">
+					<tr v-for="message in def.messagesWarn" v-bind:class="validateWholeScreenMessage(current.messagesWarn, message.id)">
+						<td class="label"><div class="stringId">{{message.id}}</div></td>
+						<td class="value">
+							<div class="constraint">{{constraintWholeScreenMessage(current.messagesWarn, message.id)}}</div>
+							<div class="ref">{{referent.messagesWarn[message.id]}}</div>
+							<div class="note" v-if="message.note">{{message.note}}</div>
+							<div class="tran" v-if="isSmall(current.messagesWarn[message.id])">
+								<input :id="'in_'+message.id+'_0'" type="text" v-model="current.messagesWarn[message.id][0]" v-bind:class="{unchanged : current.messagesWarn[message.id][0] == referent.messagesWarn[message.id][0] && current.messagesWarn[message.id][1] == referent.messagesWarn[message.id][1], empty : current.messagesWarn[message.id][0] == '' && current.messagesWarn[message.id][1] == ''}">
+								<input :id="'in_'+message.id+'_1'" type="text" v-model="current.messagesWarn[message.id][1]" v-bind:class="{unchanged : current.messagesWarn[message.id][0] == referent.messagesWarn[message.id][0] && current.messagesWarn[message.id][1] == referent.messagesWarn[message.id][1], empty : current.messagesWarn[message.id][0] == '' && current.messagesWarn[message.id][1] == ''}">
+								<button type="button" @click="convertToLarge(current.messagesWarn, message.id)">Convert to large text</button>
+							</div>
+							<div class="tran" v-else>
+								<input :id="'in_'+message.id" type="text" v-model="current.messagesWarn[message.id]" v-bind:class="{unchanged : current.messagesWarn[message.id] == referent.messagesWarn[message.id], empty : current.messagesWarn[message.id]==''}">
+								<button type="button" @click="convertToSmall(current.messagesWarn, message.id)">Convert to small text</button>
+							</div>
+						</td>
+					</tr>
+				</table>
+
 				<h2>Characters</h2>
 				<table class="data">
 					<tr v-for="char in def.characters" v-bind:class="validateInput(current.characters, char.id)">
@@ -287,13 +381,21 @@
 
 				<h2>Menu Groups</h2>
 				<table class="data">
-					<tr v-for="menu in def.menuGroups" v-bind:class="validateInput(current.menuGroups, menu.id, 2)">
+					<tr v-for="menu in def.menuGroups" v-bind:class="validateWholeScreenMessage(current.menuGroups, menu.id, 'text2')">
 						<td class="label"><div class="stringId">{{menu.id}}</div></td>
 						<td class="value">
 							<div class="label">Menu Name</div>
-							<div class="constraint">{{constraintString(menu)}}</div>
+							<div class="constraint">{{constraintWholeScreenMessage(current.menuGroups, menu.id, 'text2')}}</div>
 							<div class="ref">{{referent.menuGroups[menu.id].text2}}</div>
-							<div class="tran" v-bind:class="{unchanged : current.menuGroups[menu.id].text2[0] == referent.menuGroups[menu.id].text2[0] && current.menuGroups[menu.id].text2[1] == referent.menuGroups[menu.id].text2[1], empty : current.menuGroups[menu.id].text2[0] == '' || current.menuGroups[menu.id].text2[1] == ''}"><input type="text" v-model="current.menuGroups[menu.id].text2[0]"><input type="text" v-model="current.menuGroups[menu.id].text2[1]"></div>
+							<div class="tran" v-if="isSmall(current.menuGroups[menu.id].text2)">
+								<input type="text" v-model="current.menuGroups[menu.id].text2[0]" v-bind:class="{unchanged : current.menuGroups[menu.id].text2[0] == referent.menuGroups[menu.id].text2[0] && current.menuGroups[menu.id].text2[1] == referent.menuGroups[menu.id].text2[1], empty : current.menuGroups[menu.id].text2[0] == '' && current.menuGroups[menu.id].text2[1] == ''}">
+								<input type="text" v-model="current.menuGroups[menu.id].text2[1]" v-bind:class="{unchanged : current.menuGroups[menu.id].text2[0] == referent.menuGroups[menu.id].text2[0] && current.menuGroups[menu.id].text2[1] == referent.menuGroups[menu.id].text2[1], empty : current.menuGroups[menu.id].text2[0] == '' && current.menuGroups[menu.id].text2[1] == ''}">
+								<button type="button" @click="convertToLarge(current.menuGroups, menu.id, 'text2')">Convert to large text</button>
+							</div>
+							<div class="tran" v-else>
+								<input type="text" v-model="current.menuGroups[menu.id].text2" v-bind:class="{unchanged : current.menuGroups[menu.id].text2 == referent.menuGroups[menu.id].text2, empty : current.menuGroups[menu.id].text2==''}">
+								<button type="button" @click="convertToSmall(current.menuGroups, menu.id, 'text2')">Convert to small text</button>
+							</div>
 							<div class="label">Description</div>
 							<div class="ref">{{referent.menuGroups[menu.id].desc}}</div>
 							<div class="tran"><input type="text" v-model="current.menuGroups[menu.id].desc" v-bind:class="{unchanged : current.menuGroups[menu.id].desc == referent.menuGroups[menu.id].desc, empty : current.menuGroups[menu.id].desc == ''}"></div>
@@ -303,14 +405,22 @@
 
 				<h2>Menu Options</h2>
 				<table class="data">
-					<tr v-for="menu in def.menuOptions" v-bind:class="validateInput(current.menuOptions, menu.id, 2)">
+					<tr v-for="menu in def.menuOptions" v-bind:class="validateWholeScreenMessage(current.menuOptions, menu.id, 'text2')">
 						<td class="label"><div class="stringId">{{menu.id}}</div></td>
 						<td class="value">
 							<div v-bind:class="{hidden : false}">
-								<div class="label">Menu Name (Double-Line)</div>
-								<div class="constraint">{{constraintString(menu)}}</div>
+								<div class="label">Menu Name</div>
+								<div class="constraint">{{constraintWholeScreenMessage(current.menuOptions, menu.id, 'text2')}}</div>
 								<div class="ref">{{referent.menuOptions[menu.id].text2}}</div>
-								<div class="tran" v-bind:class="{unchanged : current.menuOptions[menu.id].text2[0] == referent.menuOptions[menu.id].text2[0] && current.menuOptions[menu.id].text2[1] == referent.menuOptions[menu.id].text2[1], empty : current.menuOptions[menu.id].text2[0] == '' || current.menuOptions[menu.id].text2[1] == ''}"><input type="text" v-model="current.menuOptions[menu.id].text2[0]"><input type="text" v-model="current.menuOptions[menu.id].text2[1]"></div>
+								<div class="tran" v-if="isSmall(current.menuOptions[menu.id].text2)">
+									<input type="text" v-model="current.menuOptions[menu.id].text2[0]" v-bind:class="{unchanged : current.menuOptions[menu.id].text2[0] == referent.menuOptions[menu.id].text2[0] && current.menuOptions[menu.id].text2[1] == referent.menuOptions[menu.id].text2[1], empty : current.menuOptions[menu.id].text2[0] == '' && current.menuOptions[menu.id].text2[1] == ''}">
+									<input type="text" v-model="current.menuOptions[menu.id].text2[1]" v-bind:class="{unchanged : current.menuOptions[menu.id].text2[0] == referent.menuOptions[menu.id].text2[0] && current.menuOptions[menu.id].text2[1] == referent.menuOptions[menu.id].text2[1], empty : current.menuOptions[menu.id].text2[0] == '' && current.menuOptions[menu.id].text2[1] == ''}">
+									<button type="button" @click="convertToLarge(current.menuOptions, menu.id, 'text2')">Convert to large text</button>
+								</div>
+								<div class="tran" v-else>
+									<input type="text" v-model="current.menuOptions[menu.id].text2" v-bind:class="{unchanged : current.menuOptions[menu.id].text2 == referent.menuOptions[menu.id].text2, empty : current.menuOptions[menu.id].text2==''}">
+									<button type="button" @click="convertToSmall(current.menuOptions, menu.id, 'text2')">Convert to small text</button>
+								</div>
 							</div>
 							<div class="label">Description</div>
 							<div class="ref">{{referent.menuOptions[menu.id].desc}}</div>
@@ -326,4 +436,4 @@
 			</div>
 		</div>
 	</body>
-</html>
+</html>

Translations/brieflz.py

@@ -0,0 +1,189 @@
+import ctypes
+import functools
+import os
+from pathlib import Path
+
+HERE = Path(__file__).resolve().parent
+
+
+@functools.lru_cache(maxsize=None)
+def _libbrieflz():
+    so_path = os.path.join(HERE, "../source/Objects/host/brieflz/libbrieflz.so")
+    libbrieflz = ctypes.cdll.LoadLibrary(so_path)
+    return libbrieflz
+
+
+@functools.lru_cache(maxsize=None)
+def _fn_blz_max_packed_size():
+    """Returns the blz_max_packed_size C function.
+    ::
+
+        /**
+        * Get bound on compressed data size.
+        *
+        * @see blz_pack
+        *
+        * @param src_size number of bytes to compress
+        * @return maximum size of compressed data
+        */
+        BLZ_API size_t
+        blz_max_packed_size(size_t src_size);
+    """
+
+    fn = _libbrieflz().blz_max_packed_size
+    fn.argtype = [
+        ctypes.c_size_t,
+    ]
+    fn.restype = ctypes.c_size_t
+    return fn
+
+
+def blz_max_packed_size(src_size: int) -> int:
+    """Get bound on compressed data size."""
+    fn_blz_max_packed_size = _fn_blz_max_packed_size()
+    return int(fn_blz_max_packed_size(src_size))
+
+
+@functools.lru_cache(maxsize=None)
+def _fn_blz_workmem_size_level():
+    """Returns the blz_workmem_size_level C function.
+    ::
+
+        /**
+        * Get required size of `workmem` buffer.
+        *
+        * @see blz_pack_level
+        *
+        * @param src_size number of bytes to compress
+        * @param level compression level
+        * @return required size in bytes of `workmem` buffer
+        */
+        BLZ_API size_t
+        blz_workmem_size_level(size_t src_size, int level);
+    """
+
+    fn = _libbrieflz().blz_workmem_size_level
+    fn.argtype = [
+        ctypes.c_size_t,
+        ctypes.c_int,
+    ]
+    fn.restype = ctypes.c_size_t
+    return fn
+
+
+def blz_workmem_size_level(src_size: int, level: int) -> int:
+    """Get required size of `workmem` buffer."""
+    fn_blz_workmem_size_level = _fn_blz_workmem_size_level()
+    return int(fn_blz_workmem_size_level(src_size, level))
+
+
+@functools.lru_cache(maxsize=None)
+def _fn_blz_pack_level():
+    """Returns the blz_pack_level C function.
+    ::
+
+        /**
+        * Compress `src_size` bytes of data from `src` to `dst`.
+        *
+        * Compression levels between 1 and 9 offer a trade-off between
+        * time/space and ratio. Level 10 is optimal but very slow.
+        *
+        * @param src pointer to data
+        * @param dst pointer to where to place compressed data
+        * @param src_size number of bytes to compress
+        * @param workmem pointer to memory for temporary use
+        * @param level compression level
+        * @return size of compressed data
+        */
+        BLZ_API unsigned long
+        blz_pack_level(const void *src, void *dst, unsigned long src_size,
+                       void *workmem, int level);
+    """
+
+    fn = _libbrieflz().blz_pack_level
+    fn.argtype = [
+        ctypes.c_char_p,
+        ctypes.c_char_p,
+        ctypes.c_ulong,
+        ctypes.c_char_p,
+        ctypes.c_int,
+    ]
+    fn.restype = ctypes.c_ulong
+    return fn
+
+
+def compress(data: bytes) -> bytes:
+    """Returns a bytes object of the brieflz-compressed data."""
+
+    fn_blz_pack_level = _fn_blz_pack_level()
+
+    output_buffer_len = blz_max_packed_size(len(data))
+
+    src = data
+    dst = ctypes.create_string_buffer(output_buffer_len)
+    src_size = len(src)
+    workmem = ctypes.create_string_buffer(blz_workmem_size_level(len(data), 10))
+    level = 10
+
+    res = fn_blz_pack_level(src, dst, src_size, workmem, level)
+
+    if res == 0:
+        raise BriefLZError()
+    else:
+        return bytes(dst[:res])  # type: ignore
+
+
+@functools.lru_cache(maxsize=None)
+def _fn_blz_depack_srcsize():
+    """Returns the blz_depack_srcsize C function.
+    ::
+
+        /**
+        * Decompress `src_size` bytes of data from `src` to `dst`.
+        *
+        * This function is unsafe. If the provided data is malformed, it may
+        * read more than `src_size` from the `src` buffer.
+        *
+        * @param src pointer to compressed data
+        * @param dst pointer to where to place decompressed data
+        * @param src_size size of the compressed data
+        * @return size of decompressed data
+        */
+        BLZ_API unsigned long
+        blz_depack_srcsize(const void *src, void *dst, unsigned long src_size);
+    """
+
+    fn = _libbrieflz().blz_depack_srcsize
+    fn.argtype = [
+        ctypes.c_char_p,
+        ctypes.c_char_p,
+        ctypes.c_ulong,
+    ]
+    fn.restype = ctypes.c_ulong
+    return fn
+
+
+def depack_srcsize(data: bytes, expected_depack_size: int) -> bytes:
+    """Returns a bytes object of the uncompressed data."""
+
+    fn_blz_depack_srcsize = _fn_blz_depack_srcsize()
+
+    output_buffer_len = expected_depack_size * 2
+
+    src = data
+    dst = ctypes.create_string_buffer(output_buffer_len)
+    src_size = len(src)
+
+    res = fn_blz_depack_srcsize(src, dst, src_size)
+
+    if res == 0:
+        raise BriefLZError()
+    else:
+        return bytes(dst[:res])  # type: ignore
+
+
+class BriefLZError(Exception):
+    """Exception raised for brieflz compression or decompression error."""
+
+    def __init__(self):
+        pass

Translations/brieflz_test.py

@@ -0,0 +1,24 @@
+#!/usr/bin/env python3
+import brieflz
+import unittest
+
+
+TEST_DATA = (
+    b"Lorem ipsum dolor sit amet, consectetur adipiscing elit. "
+    b"Ut consequat mattis orci ac laoreet. Duis ac turpis tempus, varius lacus non, dignissim lectus. "
+    b"Curabitur quis metus luctus, sollicitudin ipsum at, dictum metus. "
+    b"Cras sed est nec ex tempor tincidunt in at ante. Vivamus laoreet urna eget lectus euismod feugiat. "
+    b"Duis a massa ac metus pellentesque interdum. Nunc congue, est faucibus convallis commodo, justo nibh sagittis augue, sed tristique urna neque vitae urna. "
+    b"Donec quis orci et purus imperdiet sollicitudin."
+)
+
+
+class TestBriefLZ(unittest.TestCase):
+    def test_roundtrip(self):
+        packed = brieflz.compress(TEST_DATA)
+        depacked = brieflz.depack_srcsize(packed, len(TEST_DATA))
+        self.assertEqual(depacked, TEST_DATA)
+
+
+if __name__ == "__main__":
+    unittest.main()

Translations/fontTables.py

@@ -1,830 +0,0 @@
-# coding=utf-8
-def getFontMap():
-    font = {
-        " ": "0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,",
-        "!": "0x00,0x00,0x00,0x00,0x7C,0xFF,0xFF,0x7C,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x33,0x33,0x00,0x00,0x00,0x00,0x00,",
-        '"': "0x00,0x00,0x00,0x3C,0x3C,0x00,0x00,0x3C,0x3C,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,",
-        "#": "0x00,0x00,0x10,0x90,0xF0,0x7E,0x1E,0x90,0xF0,0x7E,0x1E,0x10,0x00,0x02,0x1E,0x1F,0x03,0x02,0x1E,0x1F,0x03,0x02,0x00,0x00,",
-        "$": "0x00,0x00,0x78,0xFC,0xCC,0xFF,0xFF,0xCC,0xCC,0x88,0x00,0x00,0x00,0x00,0x04,0x0C,0x0C,0x3F,0x3F,0x0C,0x0F,0x07,0x00,0x00,",
-        "%": "0x00,0x00,0x38,0x38,0x38,0x00,0x80,0xC0,0xE0,0x70,0x38,0x1C,0x00,0x30,0x38,0x1C,0x0E,0x07,0x03,0x01,0x38,0x38,0x38,0x00,",
-        "&": "0x00,0x00,0x00,0xB8,0xFC,0xC6,0xE2,0x3E,0x1C,0x00,0x00,0x00,0x00,0x00,0x1F,0x3F,0x31,0x21,0x37,0x1E,0x1C,0x36,0x22,0x00,",
-        "'": "0x00,0x00,0x00,0x00,0x27,0x3F,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,",
-        "(": "0x00,0x00,0x00,0xF0,0xFC,0xFE,0x07,0x01,0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x03,0x0F,0x1F,0x38,0x20,0x20,0x00,0x00,0x00,",
-        "(": "0x00,0x00,0x00,0xF0,0xFC,0xFE,0x07,0x01,0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x03,0x0F,0x1F,0x38,0x20,0x20,0x00,0x00,0x00,",
-        ")": "0x00,0x00,0x00,0x01,0x01,0x07,0xFE,0xFC,0xF0,0x00,0x00,0x00,0x00,0x00,0x00,0x20,0x20,0x38,0x1F,0x0F,0x03,0x00,0x00,0x00,",
-        ")": "0x00,0x00,0x00,0x01,0x01,0x07,0xFE,0xFC,0xF0,0x00,0x00,0x00,0x00,0x00,0x00,0x20,0x20,0x38,0x1F,0x0F,0x03,0x00,0x00,0x00,",
-        "*": "0x00,0x00,0x98,0xB8,0xE0,0xF8,0xF8,0xE0,0xB8,0x98,0x00,0x00,0x00,0x00,0x0C,0x0E,0x03,0x0F,0x0F,0x03,0x0E,0x0C,0x00,0x00,",
-        "+": "0x00,0x00,0x80,0x80,0x80,0xF0,0xF0,0x80,0x80,0x80,0x00,0x00,0x00,0x00,0x01,0x01,0x01,0x0F,0x0F,0x01,0x01,0x01,0x00,0x00,",
-        ",": "0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xB8,0xF8,0x78,0x00,0x00,0x00,0x00,0x00,",
-        "-": "0x00,0x00,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x00,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x00,0x00,",
-        ".": "0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x38,0x38,0x38,0x00,0x00,0x00,0x00,0x00,",
-        "/": "0x00,0x00,0x00,0x00,0x00,0x80,0xC0,0xE0,0x70,0x38,0x1C,0x0E,0x00,0x18,0x1C,0x0E,0x07,0x03,0x01,0x00,0x00,0x00,0x00,0x00,",
-        "0": "0x00,0xF8,0xFE,0x06,0x03,0x83,0xC3,0x63,0x33,0x1E,0xFE,0xF8,0x00,0x07,0x1F,0x1E,0x33,0x31,0x30,0x30,0x30,0x18,0x1F,0x07,",
-        "1": "0x00,0x00,0x00,0x0C,0x0C,0x0E,0xFF,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x30,0x3F,0x3F,0x30,0x30,0x30,0x00,",
-        "2": "0x00,0x1C,0x1E,0x07,0x03,0x03,0x83,0xC3,0xE3,0x77,0x3E,0x1C,0x00,0x30,0x38,0x3C,0x3E,0x37,0x33,0x31,0x30,0x30,0x30,0x30,",
-        "3": "0x00,0x0C,0x0E,0x07,0xC3,0xC3,0xC3,0xC3,0xC3,0xE7,0x7E,0x3C,0x00,0x0C,0x1C,0x38,0x30,0x30,0x30,0x30,0x30,0x39,0x1F,0x0E,",
-        "З": "0x00,0x0C,0x0E,0x07,0xC3,0xC3,0xC3,0xC3,0xC3,0xE7,0x7E,0x3C,0x00,0x0C,0x1C,0x38,0x30,0x30,0x30,0x30,0x30,0x39,0x1F,0x0E,",
-        "4": "0x00,0xC0,0xE0,0x70,0x38,0x1C,0x0E,0x07,0xFF,0xFF,0x00,0x00,0x00,0x03,0x03,0x03,0x03,0x03,0x03,0x03,0x3F,0x3F,0x03,0x03,",
-        "5": "0x00,0x3F,0x7F,0x63,0x63,0x63,0x63,0x63,0x63,0xE3,0xC3,0x83,0x00,0x0C,0x1C,0x38,0x30,0x30,0x30,0x30,0x30,0x38,0x1F,0x0F,",
-        "6": "0x00,0xC0,0xF0,0xF8,0xDC,0xCE,0xC7,0xC3,0xC3,0xC3,0x80,0x00,0x00,0x0F,0x1F,0x39,0x30,0x30,0x30,0x30,0x30,0x39,0x1F,0x0F,",
-        "7": "0x00,0x03,0x03,0x03,0x03,0x03,0x03,0xC3,0xF3,0x3F,0x0F,0x03,0x00,0x00,0x00,0x00,0x30,0x3C,0x0F,0x03,0x00,0x00,0x00,0x00,",
-        "8": "0x00,0x00,0xBC,0xFE,0xE7,0xC3,0xC3,0xC3,0xE7,0xFE,0xBC,0x00,0x00,0x0F,0x1F,0x39,0x30,0x30,0x30,0x30,0x30,0x39,0x1F,0x0F,",
-        "9": "0x00,0x3C,0x7E,0xE7,0xC3,0xC3,0xC3,0xC3,0xC3,0xE7,0xFE,0xFC,0x00,0x00,0x00,0x30,0x30,0x30,0x38,0x1C,0x0E,0x07,0x03,0x00,",
-        ":": "0x00,0x00,0x00,0x00,0x70,0x70,0x70,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x1C,0x1C,0x1C,0x00,0x00,0x00,0x00,0x00,",
-        ":": "0x00,0x00,0x00,0x00,0x70,0x70,0x70,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x1C,0x1C,0x1C,0x00,0x00,0x00,0x00,0x00,",
-        ";": "0x00,0x00,0x00,0x00,0x70,0x70,0x70,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x9C,0xFC,0x7C,0x00,0x00,0x00,0x00,0x00,",
-        "<": "0x00,0x00,0xC0,0xE0,0xF0,0x38,0x1C,0x0E,0x07,0x03,0x00,0x00,0x00,0x00,0x00,0x01,0x03,0x07,0x0E,0x1C,0x38,0x30,0x00,0x00,",
-        "=": "0x00,0x00,0x60,0x60,0x60,0x60,0x60,0x60,0x60,0x60,0x60,0x00,0x00,0x00,0x06,0x06,0x06,0x06,0x06,0x06,0x06,0x06,0x06,0x00,",
-        ">": "0x00,0x00,0x03,0x07,0x0E,0x1C,0x38,0xF0,0xE0,0xC0,0x00,0x00,0x00,0x00,0x30,0x38,0x1C,0x0E,0x07,0x03,0x01,0x00,0x00,0x00,",
-        "?": "0x00,0x1C,0x1E,0x07,0x03,0x83,0xC3,0xE3,0x77,0x3E,0x1C,0x00,0x00,0x00,0x00,0x00,0x00,0x37,0x37,0x00,0x00,0x00,0x00,0x00,",
-        "@": "0x00,0xF8,0xFE,0x07,0xF3,0xFB,0x1B,0xFB,0xFB,0x07,0xFE,0xF8,0x00,0x0F,0x1F,0x18,0x33,0x37,0x36,0x37,0x37,0x36,0x03,0x01,",
-        "A": "0x00,0x00,0x00,0xE0,0xFC,0x1F,0x1F,0xFC,0xE0,0x00,0x00,0x00,0x00,0x38,0x3F,0x07,0x06,0x06,0x06,0x06,0x07,0x3F,0x38,0x00,",
-        "А": "0x00,0x00,0x00,0xE0,0xFC,0x1F,0x1F,0xFC,0xE0,0x00,0x00,0x00,0x00,0x38,0x3F,0x07,0x06,0x06,0x06,0x06,0x07,0x3F,0x38,0x00,",
-        "B": "0x00,0xFF,0xFF,0xC3,0xC3,0xC3,0xC3,0xE7,0xFE,0xBC,0x00,0x00,0x00,0x3F,0x3F,0x30,0x30,0x30,0x30,0x30,0x39,0x1F,0x0F,0x00,",
-        "C": "0x00,0xF0,0xFC,0x0E,0x07,0x03,0x03,0x03,0x07,0x0E,0x0C,0x00,0x00,0x03,0x0F,0x1C,0x38,0x30,0x30,0x30,0x38,0x1C,0x0C,0x00,",
-        "D": "0x00,0xFF,0xFF,0x03,0x03,0x03,0x03,0x07,0x0E,0xFC,0xF0,0x00,0x00,0x3F,0x3F,0x30,0x30,0x30,0x30,0x38,0x1C,0x0F,0x03,0x00,",
-        "E": "0x00,0xFF,0xFF,0xC3,0xC3,0xC3,0xC3,0xC3,0xC3,0x03,0x03,0x00,0x00,0x3F,0x3F,0x30,0x30,0x30,0x30,0x30,0x30,0x30,0x30,0x00,",
-        "E": "0x00,0xFF,0xFF,0xC3,0xC3,0xC3,0xC3,0xC3,0xC3,0x03,0x03,0x00,0x00,0x3F,0x3F,0x30,0x30,0x30,0x30,0x30,0x30,0x30,0x30,0x00,",
-        "F": "0x00,0xFF,0xFF,0xC3,0xC3,0xC3,0xC3,0xC3,0xC3,0x03,0x03,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,",
-        "G": "0x00,0xF0,0xFC,0x0E,0x07,0x03,0xC3,0xC3,0xC3,0xC7,0xC6,0x00,0x00,0x03,0x0F,0x1C,0x38,0x30,0x30,0x30,0x30,0x3F,0x3F,0x00,",
-        "H": "0x00,0xFF,0xFF,0xC0,0xC0,0xC0,0xC0,0xC0,0xC0,0xFF,0xFF,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x00,",
-        "I": "0x00,0x00,0x00,0x03,0x03,0xFF,0xFF,0x03,0x03,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x3F,0x3F,0x30,0x30,0x00,0x00,0x00,",
-        "J": "0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0xFF,0x00,0x00,0x0E,0x1E,0x38,0x30,0x30,0x30,0x30,0x38,0x1F,0x07,0x00,",
-        "K": "0x00,0xFF,0xFF,0xC0,0xE0,0xF0,0x38,0x1C,0x0E,0x07,0x03,0x00,0x00,0x3F,0x3F,0x00,0x01,0x03,0x07,0x0E,0x1C,0x38,0x30,0x00,",
-        "L": "0x00,0xFF,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x30,0x30,0x30,0x30,0x30,0x30,0x30,0x30,0x00,",
-        "M": "0x00,0xFF,0xFF,0x1E,0x78,0xE0,0xE0,0x78,0x1E,0xFF,0xFF,0x00,0x00,0x3F,0x3F,0x00,0x00,0x01,0x01,0x00,0x00,0x3F,0x3F,0x00,",
-        "N": "0x00,0xFF,0xFF,0x0E,0x38,0xF0,0xC0,0x00,0x00,0xFF,0xFF,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0x03,0x07,0x1C,0x3F,0x3F,0x00,",
-        "O": "0x00,0xF0,0xFC,0x0E,0x07,0x03,0x03,0x07,0x0E,0xFC,0xF0,0x00,0x00,0x03,0x0F,0x1C,0x38,0x30,0x30,0x38,0x1C,0x0F,0x03,0x00,",
-        "P": "0x00,0xFF,0xFF,0x83,0x83,0x83,0x83,0x83,0xC7,0xFE,0x7C,0x00,0x00,0x3F,0x3F,0x01,0x01,0x01,0x01,0x01,0x01,0x00,0x00,0x00,",
-        "Р": "0x00,0xFF,0xFF,0x83,0x83,0x83,0x83,0x83,0xC7,0xFE,0x7C,0x00,0x00,0x3F,0x3F,0x01,0x01,0x01,0x01,0x01,0x01,0x00,0x00,0x00,",
-        "Q": "0x00,0xF0,0xFC,0x0E,0x07,0x03,0x03,0x07,0x0E,0xFC,0xF0,0x00,0x00,0x03,0x0F,0x1C,0x38,0x30,0x36,0x3E,0x1C,0x3F,0x33,0x00,",
-        "R": "0x00,0xFF,0xFF,0x83,0x83,0x83,0x83,0x83,0xC7,0xFE,0x7C,0x00,0x00,0x3F,0x3F,0x01,0x01,0x03,0x07,0x0F,0x1D,0x38,0x30,0x00,",
-        "S": "0x00,0x3C,0x7E,0xE7,0xC3,0xC3,0xC3,0xC3,0xC7,0x8E,0x0C,0x00,0x00,0x0C,0x1C,0x38,0x30,0x30,0x30,0x30,0x39,0x1F,0x0F,0x00,",
-        "T": "0x00,0x00,0x03,0x03,0x03,0xFF,0xFF,0x03,0x03,0x03,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0x00,0x00,",
-        "U": "0x00,0xFF,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0xFF,0x00,0x00,0x07,0x1F,0x38,0x30,0x30,0x30,0x30,0x38,0x1F,0x07,0x00,",
-        "V": "0x00,0x07,0x3F,0xF8,0xC0,0x00,0x00,0xC0,0xF8,0x3F,0x07,0x00,0x00,0x00,0x00,0x01,0x0F,0x3E,0x3E,0x0F,0x01,0x00,0x00,0x00,",
-        "W": "0x00,0xFF,0xFF,0x00,0x00,0x80,0x80,0x00,0x00,0xFF,0xFF,0x00,0x00,0x3F,0x3F,0x1C,0x06,0x03,0x03,0x06,0x1C,0x3F,0x3F,0x00,",
-        "X": "0x00,0x03,0x0F,0x1C,0x30,0xE0,0xE0,0x30,0x1C,0x0F,0x03,0x00,0x00,0x30,0x3C,0x0E,0x03,0x01,0x01,0x03,0x0E,0x3C,0x30,0x00,",
-        "Y": "0x00,0x03,0x0F,0x3C,0xF0,0xC0,0xC0,0xF0,0x3C,0x0F,0x03,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0x00,0x00,",
-        "Z": "0x00,0x03,0x03,0x03,0x03,0xC3,0xE3,0x33,0x1F,0x0F,0x03,0x00,0x00,0x30,0x3C,0x3E,0x33,0x31,0x30,0x30,0x30,0x30,0x30,0x00,",
-        "Z": "0x00,0x03,0x03,0x03,0x03,0xC3,0xE3,0x33,0x1F,0x0F,0x03,0x00,0x00,0x30,0x3C,0x3E,0x33,0x31,0x30,0x30,0x30,0x30,0x30,0x00,",
-        "[": "0x00,0x00,0x00,0xFF,0xFF,0x03,0x03,0x03,0x03,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x30,0x30,0x30,0x30,0x00,0x00,0x00,",
-        "\\": "0x00,0x0E,0x1C,0x38,0x70,0xE0,0xC0,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x03,0x07,0x0E,0x1C,0x18,",
-        "\\": "0x00,0x0E,0x1C,0x38,0x70,0xE0,0xC0,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x03,0x07,0x0E,0x1C,0x18,",
-        "]": "0x00,0x00,0x00,0x03,0x03,0x03,0x03,0xFF,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x30,0x30,0x3F,0x3F,0x00,0x00,0x00,",
-        "^": "0x00,0x60,0x70,0x38,0x1C,0x0E,0x07,0x0E,0x1C,0x38,0x70,0x60,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,",
-        "_": "0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xC0,0xC0,0xC0,0xC0,0xC0,0xC0,0xC0,0xC0,0xC0,0xC0,0xC0,",
-        "`": "0x00,0x00,0x00,0x00,0x00,0x3E,0x7E,0x4E,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,",
-        "a": "0x00,0x00,0x40,0x60,0x60,0x60,0x60,0x60,0x60,0xE0,0xC0,0x00,0x00,0x1C,0x3E,0x33,0x33,0x33,0x33,0x33,0x33,0x3F,0x3F,0x00,",
-        "b": "0x00,0xFF,0xFF,0xC0,0x60,0x60,0x60,0x60,0xE0,0xC0,0x80,0x00,0x00,0x3F,0x3F,0x30,0x30,0x30,0x30,0x30,0x38,0x1F,0x0F,0x00,",
-        "c": "0x00,0x80,0xC0,0xE0,0x60,0x60,0x60,0x60,0x60,0xC0,0x80,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x30,0x18,0x08,0x00,",
-        "d": "0x00,0x80,0xC0,0xE0,0x60,0x60,0x60,0xE0,0xC0,0xFF,0xFF,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x30,0x3F,0x3F,0x00,",
-        "e": "0x00,0x80,0xC0,0xE0,0x60,0x60,0x60,0x60,0x60,0xC0,0x80,0x00,0x00,0x0F,0x1F,0x3B,0x33,0x33,0x33,0x33,0x33,0x13,0x01,0x00,",
-        "f": "0x00,0xC0,0xC0,0xFC,0xFE,0xC7,0xC3,0xC3,0x03,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,",
-        "g": "0x00,0x80,0xC0,0xE0,0x60,0x60,0x60,0x60,0x60,0xE0,0xE0,0x00,0x00,0x03,0xC7,0xCE,0xCC,0xCC,0xCC,0xCC,0xE6,0x7F,0x3F,0x00,",
-        "h": "0x00,0xFF,0xFF,0xC0,0x60,0x60,0x60,0xE0,0xC0,0x80,0x00,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x00,0x00,",
-        "i": "0x00,0x00,0x00,0x00,0x60,0xEC,0xEC,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x3F,0x3F,0x30,0x30,0x00,0x00,0x00,",
-        "j": "0x00,0x00,0x00,0x00,0x00,0x00,0x60,0xEC,0xEC,0x00,0x00,0x00,0x00,0x00,0x00,0x60,0xE0,0xC0,0xC0,0xFF,0x7F,0x00,0x00,0x00,",
-        "k": "0x00,0x00,0xFF,0xFF,0x00,0x80,0xC0,0xE0,0x60,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x03,0x07,0x0F,0x1C,0x38,0x30,0x00,0x00,",
-        "l": "0x00,0x00,0x00,0x00,0x03,0xFF,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x3F,0x3F,0x30,0x30,0x00,0x00,0x00,",
-        "m": "0x00,0xE0,0xC0,0xE0,0xE0,0xC0,0xC0,0xE0,0xE0,0xC0,0x80,0x00,0x00,0x3F,0x3F,0x00,0x00,0x3F,0x3F,0x00,0x00,0x3F,0x3F,0x00,",
-        "n": "0x00,0x00,0xE0,0xE0,0x60,0x60,0x60,0x60,0xE0,0xC0,0x80,0x00,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x00,",
-        "o": "0x00,0x80,0xC0,0xE0,0x60,0x60,0x60,0x60,0xE0,0xC0,0x80,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x38,0x1F,0x0F,0x00,",
-        "p": "0x00,0xE0,0xE0,0x60,0x60,0x60,0x60,0x60,0xE0,0xC0,0x80,0x00,0x00,0xFF,0xFF,0x0C,0x18,0x18,0x18,0x18,0x1C,0x0F,0x07,0x00,",
-        "q": "0x00,0x80,0xC0,0xE0,0x60,0x60,0x60,0x60,0x60,0xE0,0xE0,0x00,0x00,0x07,0x0F,0x1C,0x18,0x18,0x18,0x18,0x0C,0xFF,0xFF,0x00,",
-        "r": "0x00,0x00,0xE0,0xE0,0xC0,0x60,0x60,0x60,0x60,0xE0,0xC0,0x00,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,",
-        "s": "0x00,0xC0,0xE0,0x60,0x60,0x60,0x60,0x60,0x40,0x00,0x00,0x00,0x00,0x11,0x33,0x33,0x33,0x33,0x33,0x3F,0x1E,0x00,0x00,0x00,",
-        "t": "0x00,0x60,0x60,0xFE,0xFE,0x60,0x60,0x60,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x1F,0x3F,0x30,0x30,0x30,0x30,0x00,0x00,0x00,",
-        "u": "0x00,0xE0,0xE0,0x00,0x00,0x00,0x00,0x00,0x00,0xE0,0xE0,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x18,0x3F,0x3F,0x00,",
-        "v": "0x00,0x60,0xE0,0x80,0x00,0x00,0x00,0x00,0x80,0xE0,0x60,0x00,0x00,0x00,0x01,0x07,0x1E,0x38,0x38,0x1E,0x07,0x01,0x00,0x00,",
-        "w": "0x00,0xE0,0xE0,0x00,0x00,0xE0,0xE0,0x00,0x00,0xE0,0xE0,0x00,0x00,0x07,0x1F,0x38,0x1C,0x0F,0x0F,0x1C,0x38,0x1F,0x07,0x00,",
-        "x": "0x00,0x60,0xE0,0xC0,0x80,0x00,0x80,0xC0,0xE0,0x60,0x00,0x00,0x00,0x30,0x38,0x1D,0x0F,0x07,0x0F,0x1D,0x38,0x30,0x00,0x00,",
-        "y": "0x00,0x00,0x60,0xE0,0x80,0x00,0x00,0x80,0xE0,0x60,0x00,0x00,0x00,0x00,0x00,0x81,0xE7,0x7E,0x1E,0x07,0x01,0x00,0x00,0x00,",
-        "z": "0x00,0x60,0x60,0x60,0x60,0x60,0xE0,0xE0,0x60,0x20,0x00,0x00,0x00,0x30,0x38,0x3C,0x36,0x33,0x31,0x30,0x30,0x30,0x00,0x00,",
-        "z": "0x00,0x60,0x60,0x60,0x60,0x60,0xE0,0xE0,0x60,0x20,0x00,0x00,0x00,0x30,0x38,0x3C,0x36,0x33,0x31,0x30,0x30,0x30,0x00,0x00,",
-        "{": "0x00,0x00,0x80,0xC0,0xFC,0x7E,0x07,0x03,0x03,0x03,0x00,0x00,0x00,0x00,0x00,0x01,0x1F,0x3F,0x70,0x60,0x60,0x60,0x00,0x00,",
-        "|": "0x00,0x00,0x00,0x00,0x00,0xFF,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0x00,0x00,",
-        "}": "0x00,0x00,0x03,0x03,0x03,0x07,0x7E,0xFC,0xC0,0x80,0x00,0x00,0x00,0x00,0x60,0x60,0x60,0x70,0x3F,0x1F,0x01,0x00,0x00,0x00,",
-        "~": "0x00,0x10,0x18,0x0C,0x04,0x0C,0x18,0x10,0x18,0x0C,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,",
-        "¡": "0x00,0x00,0x00,0x00,0x80,0xF3,0xF3,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0F,0x3F,0x3F,0x0F,0x00,0x00,0x00,0x00,",
-        "¢": "0x00,0x00,0xE0,0xF0,0x38,0xFE,0xFE,0x18,0x38,0x30,0x00,0x00,0x00,0x00,0x03,0x07,0x0E,0x3F,0x3F,0x0C,0x0E,0x06,0x00,0x00,",
-        "£": "0x00,0x00,0x00,0x80,0xF8,0xFC,0x8C,0x8C,0x1C,0x18,0x00,0x00,0x00,0x00,0x18,0x1C,0x1F,0x0B,0x18,0x18,0x18,0x18,0x08,0x00,",
-        "¤": "0x00,0xF6,0xFE,0x18,0x0C,0x0C,0x0C,0x0C,0x18,0xFE,0xF6,0x00,0x00,0x1B,0x1F,0x06,0x0C,0x0C,0x0C,0x0C,0x06,0x1F,0x1B,0x00,",
-        "¥": "0x00,0x03,0x0F,0x3C,0xF0,0xC0,0xC0,0xF0,0x3C,0x0F,0x03,0x00,0x00,0x00,0x0A,0x0A,0x0A,0x3F,0x3F,0x0A,0x0A,0x0A,0x00,0x00,",
-        "¦": "0x00,0x00,0x00,0x00,0x00,0x1F,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0x00,0x00,",
-        "§": "0x00,0x00,0xDC,0xFE,0x22,0x22,0x22,0x22,0xE6,0xC4,0x00,0x00,0x00,0x00,0x08,0x19,0x11,0x11,0x11,0x11,0x1F,0x0E,0x00,0x00,",
-        "¨": "0x00,0x00,0x00,0x03,0x03,0x00,0x00,0x03,0x03,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,",
-        "©": "0x00,0xF0,0xF8,0x1C,0xCC,0xEC,0x2C,0x6C,0x4C,0x1C,0xF8,0xF0,0x00,0x07,0x0F,0x1C,0x19,0x1B,0x1A,0x1B,0x19,0x1C,0x0F,0x07,",
-        "«": "0x00,0x80,0xC0,0x60,0x20,0x00,0x80,0xC0,0x60,0x20,0x00,0x00,0x00,0x00,0x01,0x03,0x02,0x00,0x00,0x01,0x03,0x02,0x00,0x00,",
-        "¬": "0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0xF8,0xF8,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x03,0x03,0x00,",
-        "®": "0x00,0xF0,0xF8,0x1C,0xEC,0xEC,0xAC,0xEC,0x4C,0x1C,0xF8,0xF0,0x00,0x07,0x0F,0x1C,0x1B,0x1B,0x18,0x1B,0x1B,0x1C,0x0F,0x07,",
-        "¯": "0x00,0x00,0x00,0x00,0x00,0x0C,0x0C,0x0C,0x0C,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,",
-        "°": "0x00,0x00,0x00,0x1E,0x3F,0x33,0x33,0x3F,0x1E,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,",
-        "±": "0x00,0x00,0x00,0xC0,0xC0,0xF0,0xF0,0xC0,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x18,0x18,0x1B,0x1B,0x18,0x18,0x00,0x00,0x00,",
-        "²": "0x00,0x00,0x19,0x1D,0x15,0x17,0x12,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,",
-        "³": "0x00,0x00,0x11,0x15,0x15,0x1F,0x0A,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,",
-        "´": "0x00,0x00,0x00,0x00,0x04,0x06,0x03,0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,",
-        "µ": "0x00,0xF0,0xF0,0x00,0x00,0x00,0x00,0x00,0xF0,0xF0,0x00,0x00,0x00,0xFF,0xFF,0x0E,0x0C,0x0C,0x0C,0x06,0x0F,0x0F,0x00,0x00,",
-        "¶": "0x00,0x38,0x7C,0xC6,0x82,0xFE,0xFE,0x02,0xFE,0xFE,0x02,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x00,0x3F,0x3F,0x00,0x00,",
-        "¹": "0x00,0x00,0x12,0x1F,0x1F,0x10,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,",
-        "»": "0x00,0x20,0x60,0xC0,0x80,0x00,0x20,0x60,0xC0,0x80,0x00,0x00,0x00,0x02,0x03,0x01,0x00,0x00,0x02,0x03,0x01,0x00,0x00,0x00,",
-        "¼": "0x00,0x48,0x7C,0x7C,0x40,0x80,0xC0,0x60,0x30,0x10,0x00,0x00,0x00,0x00,0x04,0x06,0x03,0x01,0x06,0x07,0x04,0x1F,0x1F,0x00,",
-        "½": "0x00,0x48,0x7C,0x7C,0x40,0x80,0xC0,0x60,0x30,0x10,0x00,0x00,0x00,0x00,0x04,0x06,0x03,0x01,0x00,0x19,0x1D,0x17,0x12,0x00,",
-        "¾": "0x00,0x44,0x54,0x7C,0x28,0x80,0xC0,0x60,0x30,0x10,0x00,0x00,0x00,0x00,0x04,0x06,0x03,0x01,0x06,0x07,0x04,0x1F,0x1F,0x00,",
-        "¿": "0x00,0x00,0x00,0x80,0xC0,0xFB,0x7B,0x00,0x00,0x00,0x00,0x00,0x00,0x0E,0x1F,0x3B,0x31,0x30,0x30,0x30,0x38,0x1E,0x0E,0x00,",
-        "À": "0x00,0x00,0x00,0x80,0xE1,0x7B,0x7E,0xE4,0x80,0x00,0x00,0x00,0x00,0x38,0x3E,0x0F,0x0D,0x0C,0x0C,0x0D,0x0F,0x3E,0x38,0x00,",
-        "Á": "0x00,0x00,0x00,0x80,0xE4,0x7E,0x7B,0xE1,0x80,0x00,0x00,0x00,0x00,0x38,0x3E,0x0F,0x0D,0x0C,0x0C,0x0D,0x0F,0x3E,0x38,0x00,",
-        "Â": "0x00,0x00,0x00,0x84,0xE6,0x7B,0x7B,0xE6,0x84,0x00,0x00,0x00,0x00,0x38,0x3E,0x0F,0x0D,0x0C,0x0C,0x0D,0x0F,0x3E,0x38,0x00,",
-        "Ã": "0x00,0x00,0x00,0x82,0xE3,0x79,0x7B,0xE2,0x83,0x01,0x00,0x00,0x00,0x38,0x3E,0x0F,0x0D,0x0C,0x0C,0x0D,0x0F,0x3E,0x38,0x00,",
-        "Ä": "0x00,0x00,0x00,0x83,0xE3,0x78,0x78,0xE3,0x83,0x00,0x00,0x00,0x00,0x38,0x3E,0x0F,0x0D,0x0C,0x0C,0x0D,0x0F,0x3E,0x38,0x00,",
-        "Å": "0x00,0x00,0x00,0x80,0xE2,0x75,0x75,0xE2,0x80,0x00,0x00,0x00,0x00,0x38,0x3E,0x0F,0x0D,0x0C,0x0C,0x0D,0x0F,0x3E,0x38,0x00,",
-        "Æ": "0x00,0x00,0x80,0xF0,0x7C,0x1F,0xFF,0xFF,0xC3,0xC3,0x03,0x00,0x00,0x3C,0x3F,0x07,0x06,0x06,0x3F,0x3F,0x30,0x30,0x30,0x00,",
-        "Ç": "0x00,0xF0,0xFC,0x0E,0x07,0x03,0x03,0x03,0x07,0x1E,0x1C,0x00,0x00,0x01,0x07,0xCE,0xDC,0xF8,0xF8,0x18,0x1C,0x0E,0x06,0x00,",
-        "È": "0x00,0xF8,0xF8,0x99,0x9B,0x9E,0x9C,0x98,0x98,0x18,0x18,0x00,0x00,0x3F,0x3F,0x31,0x31,0x31,0x31,0x31,0x31,0x30,0x30,0x00,",
-        "É": "0x00,0xF8,0xF8,0x98,0x98,0x9C,0x9E,0x9B,0x99,0x18,0x18,0x00,0x00,0x3F,0x3F,0x31,0x31,0x31,0x31,0x31,0x31,0x30,0x30,0x00,",
-        "Ê": "0x00,0xF8,0xF8,0x9C,0x9E,0x9B,0x9B,0x9E,0x9C,0x18,0x18,0x00,0x00,0x3F,0x3F,0x31,0x31,0x31,0x31,0x31,0x31,0x30,0x30,0x00,",
-        "Ë": "0x00,0xF8,0xF8,0x9B,0x9B,0x98,0x98,0x9B,0x9B,0x18,0x18,0x00,0x00,0x3F,0x3F,0x31,0x31,0x31,0x31,0x31,0x31,0x30,0x30,0x00,",
-        "Ì": "0x00,0x00,0x00,0x19,0x1B,0xFE,0xFC,0x18,0x18,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x3F,0x3F,0x30,0x30,0x00,0x00,0x00,",
-        "Í": "0x00,0x00,0x00,0x18,0x18,0xFC,0xFE,0x1B,0x19,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x3F,0x3F,0x30,0x30,0x00,0x00,0x00,",
-        "Î": "0x00,0x00,0x00,0x1C,0x1E,0xFB,0xFB,0x1E,0x1C,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x3F,0x3F,0x30,0x30,0x00,0x00,0x00,",
-        "Ï": "0x00,0x00,0x00,0x1B,0x1B,0xF8,0xF8,0x1B,0x1B,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x3F,0x3F,0x30,0x30,0x00,0x00,0x00,",
-        "Ð": "0x00,0xC0,0xFF,0xFF,0xC3,0x03,0x03,0x07,0x0E,0xFC,0xF0,0x00,0x00,0x00,0x3F,0x3F,0x30,0x30,0x30,0x38,0x1C,0x0F,0x03,0x00,",
-        "Ñ": "0x00,0xF8,0xF8,0x72,0xE3,0xC1,0x83,0x02,0x03,0xF9,0xF8,0x00,0x00,0x3F,0x3F,0x00,0x00,0x01,0x03,0x07,0x0E,0x3F,0x3F,0x00,",
-        "Ò": "0x00,0xE0,0xF0,0x39,0x1B,0x1E,0x1C,0x18,0x38,0xF0,0xE0,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x38,0x1F,0x0F,0x00,",
-        "Ó": "0x00,0xE0,0xF0,0x38,0x18,0x1C,0x1E,0x1B,0x39,0xF0,0xE0,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x38,0x1F,0x0F,0x00,",
-        "Ô": "0x00,0xE0,0xF0,0x3C,0x1E,0x1B,0x1B,0x1E,0x3C,0xF0,0xE0,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x38,0x1F,0x0F,0x00,",
-        "Õ": "0x00,0xE0,0xF0,0x3A,0x1B,0x19,0x1B,0x1A,0x3B,0xF1,0xE0,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x38,0x1F,0x0F,0x00,",
-        "Ö": "0x00,0xE0,0xF0,0x3B,0x1B,0x18,0x18,0x1B,0x3B,0xF0,0xE0,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x38,0x1F,0x0F,0x00,",
-        "×": "0x00,0xF0,0xF8,0x1C,0x0C,0x8C,0xEC,0x7C,0x18,0xFC,0xF4,0x00,0x00,0x2F,0x3F,0x18,0x3E,0x37,0x31,0x30,0x38,0x1F,0x0F,0x00,",
-        "Ù": "0x00,0xF8,0xF8,0x01,0x03,0x06,0x04,0x00,0x00,0xF8,0xF8,0x00,0x00,0x07,0x1F,0x38,0x30,0x30,0x30,0x30,0x38,0x1F,0x07,0x00,",
-        "Ú": "0x00,0xF8,0xF8,0x00,0x00,0x04,0x06,0x03,0x01,0xF8,0xF8,0x00,0x00,0x07,0x1F,0x38,0x30,0x30,0x30,0x30,0x38,0x1F,0x07,0x00,",
-        "Û": "0x00,0xF8,0xF8,0x04,0x06,0x03,0x03,0x06,0x04,0xF8,0xF8,0x00,0x00,0x07,0x1F,0x38,0x30,0x30,0x30,0x30,0x38,0x1F,0x07,0x00,",
-        "Ü": "0x00,0xF8,0xF8,0x03,0x03,0x00,0x00,0x03,0x03,0xF8,0xF8,0x00,0x00,0x07,0x1F,0x38,0x30,0x30,0x30,0x30,0x38,0x1F,0x07,0x00,",
-        "Ý": "0x00,0x08,0x18,0x30,0x60,0xC4,0xC6,0x63,0x31,0x18,0x08,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0x00,0x00,",
-        "ß": "0x00,0x00,0xC0,0xE0,0x30,0x10,0x10,0x30,0xE0,0xC0,0x00,0x00,0x00,0x00,0xFF,0xFF,0x21,0x21,0x21,0x33,0x3F,0x1E,0x00,0x00,",
-        "à": "0x00,0x00,0x40,0x60,0x62,0x66,0x6C,0x68,0x60,0xE0,0xC0,0x00,0x00,0x1C,0x3E,0x33,0x33,0x33,0x33,0x33,0x33,0x3F,0x3F,0x00,",
-        "á": "0x00,0x00,0x40,0x60,0x68,0x6C,0x66,0x62,0x60,0xE0,0xC0,0x00,0x00,0x1C,0x3E,0x33,0x33,0x33,0x33,0x33,0x33,0x3F,0x3F,0x00,",
-        "â": "0x00,0x00,0x40,0x68,0x6C,0x66,0x66,0x6C,0x68,0xE0,0xC0,0x00,0x00,0x1C,0x3E,0x33,0x33,0x33,0x33,0x33,0x33,0x3F,0x3F,0x00,",
-        "ã": "0x00,0x00,0x40,0x68,0x6C,0x64,0x6C,0x68,0x6C,0xE4,0xC0,0x00,0x00,0x1C,0x3E,0x33,0x33,0x33,0x33,0x33,0x33,0x3F,0x3F,0x00,",
-        "ä": "0x00,0x00,0x40,0x6C,0x6C,0x60,0x60,0x6C,0x6C,0xE0,0xC0,0x00,0x00,0x1C,0x3E,0x33,0x33,0x33,0x33,0x33,0x33,0x3F,0x3F,0x00,",
-        "å": "0x00,0x00,0x40,0x60,0x64,0x6A,0x6A,0x64,0x60,0xE0,0xC0,0x00,0x00,0x1C,0x3E,0x33,0x33,0x33,0x33,0x33,0x33,0x3F,0x3F,0x00,",
-        "æ": "0x00,0x80,0xC0,0x40,0x40,0xC0,0x80,0x40,0x40,0xC0,0x80,0x00,0x00,0x1C,0x3E,0x22,0x22,0x1F,0x3F,0x22,0x22,0x33,0x11,0x00,",
-        "ç": "0x00,0x80,0xC0,0xE0,0x60,0x60,0x60,0x60,0xE0,0xC0,0x80,0x00,0x00,0x0F,0x1F,0xB8,0xB0,0xF0,0xF0,0x30,0x38,0x18,0x08,0x00,",
-        "è": "0x00,0x80,0xC0,0xE0,0x62,0x66,0x6C,0x68,0x60,0xC0,0x80,0x00,0x00,0x0F,0x1F,0x33,0x33,0x33,0x33,0x33,0x33,0x13,0x03,0x00,",
-        "é": "0x00,0x80,0xC0,0xE0,0x60,0x68,0x6C,0x66,0x62,0xC0,0x80,0x00,0x00,0x0F,0x1F,0x3B,0x33,0x33,0x33,0x33,0x33,0x13,0x03,0x00,",
-        "ê": "0x00,0x80,0xC0,0xE8,0x6C,0x66,0x66,0x6C,0x68,0xC0,0x80,0x00,0x00,0x0F,0x1F,0x33,0x33,0x33,0x33,0x33,0x33,0x13,0x03,0x00,",
-        "ë": "0x00,0x80,0xC0,0xEC,0x6C,0x60,0x60,0x6C,0x6C,0xC0,0x80,0x00,0x00,0x0F,0x1F,0x33,0x33,0x33,0x33,0x33,0x33,0x13,0x03,0x00,",
-        "ì": "0x00,0x00,0x00,0x00,0x62,0xE6,0xEC,0x08,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x3F,0x3F,0x30,0x30,0x00,0x00,0x00,",
-        "í": "0x00,0x00,0x00,0x00,0x68,0xEC,0xE6,0x02,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x3F,0x3F,0x30,0x30,0x00,0x00,0x00,",
-        "î": "0x00,0x00,0x00,0x08,0x6C,0xE6,0xE6,0x0C,0x08,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x3F,0x3F,0x30,0x30,0x00,0x00,0x00,",
-        "ï": "0x00,0x00,0x00,0x0C,0x6C,0xE0,0xEC,0x0C,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x3F,0x3F,0x30,0x30,0x00,0x00,0x00,",
-        "ñ": "0x00,0x00,0xE0,0xE8,0x6C,0x64,0x6C,0x68,0xEC,0xC4,0x80,0x00,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x00,",
-        "ò": "0x00,0x80,0xC0,0xE0,0x62,0x66,0x6C,0x68,0xE0,0xC0,0x80,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x38,0x1F,0x0F,0x00,",
-        "ó": "0x00,0x80,0xC0,0xE0,0x68,0x6C,0x66,0x62,0xE0,0xC0,0x80,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x38,0x1F,0x0F,0x00,",
-        "ô": "0x00,0x80,0xC0,0xE8,0x6C,0x66,0x66,0x6C,0xE8,0xC0,0x80,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x38,0x1F,0x0F,0x00,",
-        "õ": "0x00,0x80,0xC8,0xEC,0x64,0x6C,0x68,0x6C,0xE4,0xC0,0x80,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x38,0x1F,0x0F,0x00,",
-        "ö": "0x00,0x80,0xC0,0xEC,0x6C,0x60,0x60,0x6C,0xEC,0xC0,0x80,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x38,0x1F,0x0F,0x00,",
-        "÷": "0x00,0x00,0x80,0x80,0x80,0xB0,0xB0,0x80,0x80,0x80,0x00,0x00,0x00,0x00,0x01,0x01,0x01,0x0D,0x0D,0x01,0x01,0x01,0x00,0x00,",
-        "ø": "0x00,0x80,0xC0,0xE0,0x60,0x60,0x60,0xE0,0xC0,0xE0,0xA0,0x00,0x00,0x2F,0x3F,0x18,0x3C,0x36,0x33,0x31,0x38,0x1F,0x0F,0x00,",
-        "ù": "0x00,0xE0,0xE0,0x00,0x02,0x06,0x0C,0x08,0x00,0xE0,0xE0,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x18,0x3F,0x3F,0x00,",
-        "ú": "0x00,0xE0,0xE0,0x00,0x08,0x0C,0x06,0x02,0x00,0xE0,0xE0,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x18,0x3F,0x3F,0x00,",
-        "û": "0x00,0xE0,0xE0,0x08,0x0C,0x06,0x06,0x0C,0x08,0xE0,0xE0,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x18,0x3F,0x3F,0x00,",
-        "ü": "0x00,0xE0,0xE0,0x0C,0x0C,0x00,0x00,0x0C,0x0C,0xE0,0xE0,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x18,0x3F,0x3F,0x00,",
-        "ý": "0x00,0x00,0x60,0xE0,0x80,0x10,0x18,0x8C,0xE4,0x60,0x00,0x00,0x00,0x00,0x00,0x81,0xE7,0x7E,0x1E,0x07,0x01,0x00,0x00,0x00,",
-        "þ": "0x00,0x00,0x03,0xFF,0xFF,0x1B,0x18,0x18,0xF8,0xF0,0x00,0x00,0x00,0x00,0x30,0x3F,0x3F,0x36,0x06,0x06,0x07,0x03,0x00,0x00,",
-        "ÿ": "0x00,0x00,0x60,0xEC,0x8C,0x00,0x00,0x8C,0xEC,0x60,0x00,0x00,0x00,0x00,0x00,0x81,0xE7,0x7E,0x1E,0x07,0x01,0x00,0x00,0x00,",
-        "Ѐ": "0x00,0xFC,0xFC,0x8D,0x8F,0x8E,0x8C,0x8C,0x8C,0x0C,0x0C,0x00,0x00,0x3F,0x3F,0x31,0x31,0x31,0x31,0x31,0x31,0x30,0x30,0x00,",
-        "Ё": "0x00,0xFE,0xFE,0xC7,0xC7,0xC6,0xC6,0xC7,0xC7,0x06,0x06,0x00,0x00,0x3F,0x3F,0x30,0x30,0x30,0x30,0x30,0x30,0x30,0x30,0x00,",
-        "Ђ": "0x00,0x03,0xFF,0xFF,0x83,0xC3,0xC3,0xC3,0xC0,0x80,0x00,0x00,0x00,0x00,0x3F,0x3F,0x01,0x00,0x30,0x30,0x39,0x1F,0x0F,0x00,",
-        "Ѓ": "0x00,0xFC,0xFC,0x0C,0x0C,0x0C,0x0E,0x0F,0x0D,0x0C,0x0C,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,",
-        "Є": "0x00,0xF8,0xFC,0xCE,0xC7,0xC3,0xC3,0xC3,0x07,0x0E,0x0C,0x00,0x00,0x07,0x0F,0x1C,0x38,0x30,0x30,0x30,0x38,0x1C,0x0C,0x00,",
-        "Ѕ": "0x00,0x3C,0x7E,0x67,0xE3,0xC3,0xC3,0xC3,0x87,0x8E,0x0C,0x00,0x00,0x0C,0x1C,0x38,0x30,0x30,0x30,0x31,0x39,0x1F,0x0F,0x00,",
-        "І": "0x00,0x00,0x00,0x03,0x03,0xFF,0xFF,0x03,0x03,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x3F,0x3F,0x30,0x30,0x00,0x00,0x00,",
-        "Ї": "0x00,0x00,0x00,0x0D,0x0D,0xFC,0xFC,0x0D,0x0D,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x3F,0x3F,0x30,0x30,0x00,0x00,0x00,",
-        "Ј": "0x00,0x00,0x00,0x00,0x00,0x00,0x03,0x03,0x03,0xFF,0xFF,0x00,0x00,0x0E,0x1E,0x38,0x30,0x30,0x30,0x30,0x38,0x1F,0x0F,0x00,",
-        "Љ": "0x00,0x00,0xFE,0xFF,0x03,0x03,0xFF,0xFF,0xC0,0xC0,0x80,0x00,0x00,0x30,0x3F,0x1F,0x00,0x00,0x3F,0x3F,0x30,0x39,0x1F,0x0F,",
-        "Њ": "0x00,0xFF,0xFF,0xC0,0xC0,0xC0,0xFF,0xFF,0xC0,0xC0,0x80,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0x3F,0x3F,0x30,0x39,0x1F,0x0F,",
-        "Ћ": "0x00,0x03,0xFF,0xFF,0xC3,0xC3,0xC3,0xC3,0xC0,0x80,0x00,0x00,0x00,0x00,0x3F,0x3F,0x01,0x00,0x00,0x00,0x01,0x3F,0x3F,0x00,",
-        "Ќ": "0x00,0xFF,0xFF,0xC0,0xE2,0xF3,0x39,0x1C,0x0E,0x07,0x03,0x00,0x00,0x3F,0x3F,0x00,0x01,0x03,0x07,0x0E,0x1C,0x38,0x30,0x00,",
-        "Ѝ": "0x00,0xFF,0xFF,0x00,0x01,0xC3,0xF2,0x38,0x0E,0xFF,0xFF,0x00,0x00,0x3F,0x3F,0x1C,0x07,0x03,0x00,0x00,0x00,0x3F,0x3F,0x00,",
-        "Ў": "0x00,0x07,0x1F,0x7C,0xF1,0xC1,0xC1,0xF1,0x7C,0x1F,0x07,0x00,0x00,0x00,0x30,0x30,0x3C,0x0F,0x07,0x01,0x00,0x00,0x00,0x00,",
-        "Џ": "0x00,0xFF,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0xFF,0x00,0x00,0x1F,0x1F,0x18,0x18,0x78,0x78,0x18,0x18,0x1F,0x1F,0x00,",
-        # "A":"0x00,0x80,0xE0,0x78,0x1E,0x07,0x07,0x1E,0x78,0xE0,0x80,0x00,0x00,0x3F,0x3F,0x06,0x06,0x06,0x06,0x06,0x06,0x3F,0x3F,0x00," ,
-        "Б": "0x00,0xFF,0xFF,0xC3,0xC3,0xC3,0xC3,0xC3,0xC3,0x83,0x00,0x00,0x00,0x3F,0x3F,0x30,0x30,0x30,0x30,0x30,0x39,0x1F,0x0F,0x00,",
-        "В": "0x00,0xFF,0xFF,0xC3,0xC3,0xC3,0xC3,0xE7,0xFE,0xBC,0x00,0x00,0x00,0x3F,0x3F,0x30,0x30,0x30,0x30,0x30,0x39,0x1F,0x0F,0x00,",
-        "Г": "0x00,0xFF,0xFF,0x03,0x03,0x03,0x03,0x03,0x03,0x03,0x03,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,",
-        "Г": "0x00,0xFF,0xFF,0x03,0x03,0x03,0x03,0x03,0x03,0x03,0x03,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,",
-        "Д": "0x00,0x00,0xF8,0xFE,0x0F,0x03,0x03,0x03,0xFF,0xFF,0x00,0x00,0x00,0x70,0x7F,0x1F,0x18,0x18,0x18,0x18,0x1F,0x7F,0x70,0x00,",
-        "Е": "0x00,0xFF,0xFF,0xC3,0xC3,0xC3,0xC3,0xC3,0xC3,0x03,0x03,0x00,0x00,0x3F,0x3F,0x30,0x30,0x30,0x30,0x30,0x30,0x30,0x30,0x00,",
-        "Ж": "0x00,0x03,0x0F,0xFC,0xE0,0xFF,0xFF,0xE0,0xFC,0x0F,0x03,0x00,0x00,0x38,0x3F,0x07,0x00,0x3F,0x3F,0x00,0x07,0x3F,0x38,0x00,",
-        "Ж": "0x00,0x03,0x0F,0xFC,0xE0,0xFF,0xFF,0xE0,0xFC,0x0F,0x03,0x00,0x00,0x38,0x3F,0x07,0x00,0x3F,0x3F,0x00,0x07,0x3F,0x38,0x00,",
-        "И": "0x00,0xFF,0xFF,0x00,0x00,0xC0,0xF0,0x38,0x0E,0xFF,0xFF,0x00,0x00,0x3F,0x3F,0x1C,0x07,0x03,0x00,0x00,0x00,0x3F,0x3F,0x00,",
-        "Й": "0x00,0xFF,0xFF,0x00,0x02,0xC3,0xF1,0x38,0x0E,0xFF,0xFF,0x00,0x00,0x3F,0x3F,0x1C,0x07,0x03,0x00,0x00,0x00,0x3F,0x3F,0x00,",
-        "К": "0x00,0xFF,0xFF,0xC0,0xE0,0xF0,0x38,0x1C,0x0E,0x07,0x03,0x00,0x00,0x3F,0x3F,0x00,0x01,0x03,0x07,0x0E,0x1C,0x38,0x30,0x00,",
-        "Л": "0x00,0x00,0xF0,0xFC,0x1E,0x07,0x03,0x03,0x03,0xFF,0xFF,0x00,0x00,0x30,0x3F,0x1F,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x00,",
-        "М": "0x00,0xFF,0xFF,0x1E,0x78,0xE0,0xE0,0x78,0x1E,0xFF,0xFF,0x00,0x00,0x3F,0x3F,0x00,0x00,0x01,0x01,0x00,0x00,0x3F,0x3F,0x00,",
-        "Н": "0x00,0xFF,0xFF,0xC0,0xC0,0xC0,0xC0,0xC0,0xC0,0xFF,0xFF,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x00,",
-        "О": "0x00,0xF0,0xFC,0x0E,0x07,0x03,0x03,0x07,0x0E,0xFC,0xF0,0x00,0x00,0x03,0x0F,0x1C,0x38,0x30,0x30,0x38,0x1C,0x0F,0x03,0x00,",
-        "П": "0x00,0xFF,0xFF,0x03,0x03,0x03,0x03,0x03,0x03,0xFF,0xFF,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x00,",
-        "Р": "0x00,0xFF,0xFF,0x83,0x83,0x83,0x83,0x83,0xC7,0xFE,0x7C,0x00,0x00,0x3F,0x3F,0x01,0x01,0x01,0x01,0x01,0x01,0x00,0x00,0x00,",
-        "С": "0x00,0xF0,0xFC,0x0E,0x07,0x03,0x03,0x03,0x07,0x0E,0x0C,0x00,0x00,0x03,0x0F,0x1C,0x38,0x30,0x30,0x30,0x38,0x1C,0x0C,0x00,",
-        "Т": "0x00,0x03,0x03,0x03,0x03,0xFF,0xFF,0x03,0x03,0x03,0x03,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0x00,0x00,",
-        "У": "0x00,0x07,0x1F,0x7C,0xF0,0xC0,0xC0,0xF0,0x7C,0x1F,0x07,0x00,0x00,0x00,0x30,0x30,0x3C,0x0F,0x07,0x01,0x00,0x00,0x00,0x00,",
-        "Ф": "0x00,0xF8,0xFC,0x0E,0x06,0xFF,0xFF,0x06,0x0E,0xFC,0xF8,0x00,0x00,0x03,0x07,0x0E,0x0C,0x3F,0x3F,0x0C,0x0E,0x07,0x03,0x00,",
-        "Х": "0x00,0x03,0x0F,0x3C,0xF0,0xC0,0xC0,0xF0,0x3C,0x0F,0x03,0x00,0x00,0x30,0x3C,0x0F,0x03,0x00,0x00,0x03,0x0F,0x3C,0x30,0x00,",
-        "Ц": "0x00,0xFF,0xFF,0x00,0x00,0x00,0x00,0x00,0xFF,0xFF,0x00,0x00,0x00,0x1F,0x1F,0x18,0x18,0x18,0x18,0x18,0x1F,0x7F,0x78,0x00,",
-        "Ч": "0x00,0x7F,0xFF,0xC0,0xC0,0xC0,0xC0,0xC0,0xC0,0xFF,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x00,",
-        "Ш": "0x00,0xFF,0xFF,0x00,0x00,0xFF,0xFF,0x00,0x00,0xFF,0xFF,0x00,0x00,0x3F,0x3F,0x30,0x30,0x3F,0x3F,0x30,0x30,0x3F,0x3F,0x00,",
-        "Щ": "0x00,0xFF,0xFF,0x00,0x00,0xFF,0xFF,0x00,0x00,0xFF,0xFF,0x00,0x00,0x1F,0x1F,0x18,0x18,0x1F,0x1F,0x18,0x18,0x1F,0x7F,0x70,",
-        "Ъ": "0x03,0x03,0xFF,0xFF,0xC0,0xC0,0xC0,0xC0,0xC0,0x80,0x00,0x00,0x00,0x00,0x3F,0x3F,0x30,0x30,0x30,0x30,0x39,0x1F,0x0F,0x00,",
-        "Ы": "0x00,0xFF,0xFF,0xC0,0xC0,0xC0,0xC0,0x80,0x00,0x00,0xFF,0xFF,0x00,0x3F,0x3F,0x30,0x30,0x30,0x39,0x1F,0x0F,0x00,0x3F,0x3F,",
-        "Ь": "0x00,0xFF,0xFF,0xC0,0xC0,0xC0,0xC0,0xC0,0xC0,0x80,0x00,0x00,0x00,0x3F,0x3F,0x30,0x30,0x30,0x30,0x30,0x39,0x1F,0x0F,0x00,",
-        "Э": "0x00,0x0C,0x0E,0x07,0xC3,0xC3,0xC3,0xC7,0xCE,0xFC,0xF8,0x00,0x00,0x0C,0x1C,0x38,0x30,0x30,0x30,0x38,0x1C,0x0F,0x07,0x00,",
-        "Ю": "0x00,0xFF,0xFF,0xC0,0xFC,0xFE,0x07,0x03,0x07,0xFE,0xFC,0x00,0x00,0x3F,0x3F,0x00,0x0F,0x1F,0x38,0x30,0x38,0x1F,0x0F,0x00,",
-        "Я": "0x00,0x7C,0xFE,0xC7,0x83,0x83,0x83,0x83,0x83,0xFF,0xFF,0x00,0x00,0x30,0x38,0x1D,0x0F,0x07,0x03,0x01,0x01,0x3F,0x3F,0x00,",
-        "а": "0x00,0x00,0x30,0x30,0x30,0x30,0x30,0x30,0x30,0xF0,0xE0,0x00,0x00,0x1E,0x3F,0x33,0x33,0x33,0x33,0x33,0x33,0x3F,0x3F,0x00,",
-        "б": "0x00,0xE0,0xF0,0x30,0x30,0x30,0x30,0x30,0x30,0x30,0x00,0x00,0x00,0x1F,0x3F,0x33,0x33,0x33,0x33,0x33,0x33,0x3F,0x1E,0x00,",
-        "в": "0x00,0xF0,0xF0,0x30,0x30,0x30,0x30,0x30,0xF0,0xE0,0x00,0x00,0x00,0x3F,0x3F,0x33,0x33,0x33,0x33,0x33,0x33,0x3F,0x1E,0x00,",
-        "г": "0x00,0xF0,0xF0,0x30,0x30,0x30,0x30,0x30,0x30,0x30,0x30,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,",
-        "д": "0x00,0x00,0xC0,0xE0,0x70,0x30,0x30,0x30,0xF0,0xF0,0x00,0x00,0x00,0x60,0x7F,0x3F,0x30,0x30,0x30,0x30,0x3F,0x7F,0x60,0x00,",
-        "е": "0x00,0xE0,0xF0,0x30,0x30,0x30,0x30,0x30,0x30,0xF0,0xE0,0x00,0x00,0x1F,0x3F,0x33,0x33,0x33,0x33,0x33,0x33,0x33,0x33,0x00,",
-        "ж": "0x00,0x30,0xF0,0xC0,0x00,0xF0,0xF0,0x00,0xC0,0xF0,0x30,0x00,0x00,0x30,0x3C,0x0F,0x03,0x3F,0x3F,0x03,0x0F,0x3C,0x30,0x00,",
-        "з": "0x00,0x60,0x70,0x30,0x30,0x30,0x30,0x30,0x30,0xF0,0xE0,0x00,0x00,0x18,0x38,0x30,0x33,0x33,0x33,0x33,0x33,0x3F,0x1D,0x00,",
-        "З": "0x00,0x60,0x70,0x30,0x30,0x30,0x30,0x30,0x30,0xF0,0xE0,0x00,0x00,0x18,0x38,0x30,0x33,0x33,0x33,0x33,0x33,0x3F,0x1D,0x00,",
-        "и": "0x00,0xF0,0xF0,0x00,0x00,0x00,0x80,0xC0,0xE0,0xF0,0xF0,0x00,0x00,0x3F,0x3F,0x1C,0x0E,0x07,0x03,0x01,0x00,0x3F,0x3F,0x00,",
-        "й": "0x00,0xF0,0xF0,0x00,0x04,0x08,0x88,0xC4,0xE0,0xF0,0xF0,0x00,0x00,0x3F,0x3F,0x1C,0x0E,0x07,0x03,0x01,0x00,0x3F,0x3F,0x00,",
-        "к": "0x00,0xF0,0xF0,0x80,0x80,0xC0,0xE0,0x70,0x30,0x10,0x00,0x00,0x00,0x3F,0x3F,0x03,0x03,0x07,0x0E,0x1C,0x38,0x30,0x20,0x00,",
-        "л": "0x00,0x00,0xC0,0xE0,0x70,0x30,0x30,0x30,0x30,0xF0,0xF0,0x00,0x00,0x30,0x3F,0x1F,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x00,",
-        "м": "0x00,0xF0,0xF0,0xE0,0xC0,0x80,0x80,0xC0,0xE0,0xF0,0xF0,0x00,0x00,0x3F,0x3F,0x00,0x01,0x03,0x03,0x01,0x00,0x3F,0x3F,0x00,",
-        "н": "0x00,0xF0,0xF0,0x00,0x00,0x00,0x00,0x00,0x00,0xF0,0xF0,0x00,0x00,0x3F,0x3F,0x03,0x03,0x03,0x03,0x03,0x03,0x3F,0x3F,0x00,",
-        "о": "0x00,0xC0,0xE0,0x70,0x30,0x30,0x30,0x30,0x70,0xE0,0xC0,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x38,0x1F,0x0F,0x00,",
-        "п": "0x00,0xF0,0xF0,0x30,0x30,0x30,0x30,0x30,0x30,0xF0,0xF0,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x00,",
-        "р": "0x00,0xF0,0xF0,0x30,0x30,0x30,0x30,0x30,0x70,0xE0,0xC0,0x00,0x00,0xFF,0xFF,0x0C,0x0C,0x0C,0x0C,0x0C,0x0E,0x07,0x03,0x00,",
-        "с": "0x00,0xC0,0xE0,0x70,0x30,0x30,0x30,0x30,0x70,0x60,0x40,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x38,0x18,0x08,0x00,",
-        "т": "0x00,0x30,0x30,0x30,0x30,0xF0,0xF0,0x30,0x30,0x30,0x30,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0x00,0x00,",
-        "у": "0x00,0x30,0xF0,0xC0,0x00,0x00,0x00,0x00,0xC0,0xF0,0x30,0x00,0x00,0x60,0xE0,0xC3,0xE7,0x7C,0x3C,0x0F,0x03,0x00,0x00,0x00,",
-        "ф": "0x00,0x80,0xC0,0x60,0x60,0xF0,0xF0,0x60,0x60,0xC0,0x80,0x00,0x00,0x0F,0x1F,0x30,0x30,0xFF,0xFF,0x30,0x30,0x1F,0x0F,0x00,",
-        "х": "0x00,0x30,0x70,0xC0,0x80,0x00,0x00,0x80,0xC0,0x70,0x30,0x00,0x00,0x30,0x38,0x0C,0x07,0x03,0x03,0x07,0x0C,0x38,0x30,0x00,",
-        "ц": "0x00,0xF0,0xF0,0x00,0x00,0x00,0x00,0x00,0xF0,0xF0,0x00,0x00,0x00,0x3F,0x3F,0x30,0x30,0x30,0x30,0x30,0x3F,0xFF,0xF0,0x00,",
-        "ч": "0x00,0xF0,0xF0,0x00,0x00,0x00,0x00,0x00,0x00,0xF0,0xF0,0x00,0x00,0x01,0x03,0x03,0x03,0x03,0x03,0x03,0x03,0x3F,0x3F,0x00,",
-        "ш": "0x00,0xF0,0xF0,0x00,0x00,0xE0,0xE0,0x00,0x00,0xF0,0xF0,0x00,0x00,0x3F,0x3F,0x30,0x30,0x3F,0x3F,0x30,0x30,0x3F,0x3F,0x00,",
-        "щ": "0x00,0xF0,0xF0,0x00,0x00,0xF0,0xF0,0x00,0x00,0xF0,0xF0,0x00,0x00,0x3F,0x3F,0x30,0x30,0x3F,0x3F,0x30,0x30,0x3F,0xFF,0xE0,",
-        "ъ": "0x30,0x30,0xF0,0xF0,0x80,0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x31,0x31,0x31,0x31,0x3B,0x1F,0x0E,0x00,",
-        "ы": "0x00,0xF0,0xF0,0x80,0x80,0x80,0x00,0x00,0x00,0xF0,0xF0,0x00,0x00,0x3F,0x3F,0x31,0x31,0x3B,0x1F,0x0E,0x00,0x3F,0x3F,0x00,",
-        "ь": "0x00,0xF0,0xF0,0x80,0x80,0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x00,0x3F,0x3F,0x31,0x31,0x31,0x31,0x31,0x3B,0x1F,0x0E,0x00,",
-        "э": "0x00,0x40,0x60,0x70,0x30,0x30,0x30,0x30,0x70,0xE0,0xC0,0x00,0x00,0x08,0x18,0x38,0x30,0x33,0x33,0x33,0x3B,0x1F,0x0F,0x00,",
-        "ю": "0x00,0xF0,0xF0,0x00,0xE0,0xF0,0x30,0x30,0x30,0xF0,0xE0,0x00,0x00,0x3F,0x3F,0x03,0x1F,0x3F,0x30,0x30,0x30,0x3F,0x1F,0x00,",
-        "я": "0x00,0xC0,0xE0,0x70,0x30,0x30,0x30,0x30,0x30,0xF0,0xF0,0x00,0x00,0x21,0x33,0x3B,0x1E,0x0E,0x06,0x06,0x06,0x3F,0x3F,0x00,",
-        "ѐ": "0x00,0xE0,0xF0,0x32,0x36,0x36,0x34,0x30,0x30,0xF0,0xE0,0x00,0x00,0x1F,0x3F,0x33,0x33,0x33,0x33,0x33,0x33,0x33,0x33,0x00,",
-        "ё": "0x00,0xE0,0xF0,0x34,0x34,0x30,0x30,0x34,0x34,0xF0,0xE0,0x00,0x00,0x1F,0x3F,0x33,0x33,0x33,0x33,0x33,0x33,0x33,0x33,0x00,",
-        "ђ": "0x00,0x30,0xFC,0xFC,0x30,0xB0,0xB0,0xB0,0x80,0x80,0x00,0x00,0x00,0x00,0x3F,0x3F,0x07,0x03,0x01,0x01,0xC1,0xFF,0x3F,0x00,",
-        "ѓ": "0x00,0xF0,0xF0,0x30,0x30,0x34,0x36,0x32,0x30,0x30,0x30,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,",
-        "є": "0x00,0xC0,0xE0,0x70,0x30,0x30,0x30,0x30,0x70,0x60,0x40,0x00,0x00,0x0F,0x1F,0x3B,0x33,0x33,0x33,0x30,0x38,0x18,0x08,0x00,",
-        "ѕ": "0x00,0xE0,0xF0,0xB0,0xB0,0x30,0x30,0x30,0x30,0x70,0x60,0x00,0x00,0x18,0x39,0x31,0x33,0x33,0x33,0x37,0x36,0x3E,0x1C,0x00,",
-        "і": "0x00,0x00,0x00,0x00,0x30,0xF6,0xF6,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x3F,0x3F,0x30,0x30,0x00,0x00,0x00,",
-        "ї": "0x00,0x00,0x00,0x04,0x34,0xF0,0xF4,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x3F,0x3F,0x30,0x30,0x00,0x00,0x00,",
-        "ј": "0x00,0x00,0x00,0x00,0x00,0x30,0x30,0xF6,0xF6,0x00,0x00,0x00,0x00,0x00,0x00,0x60,0xE0,0xC0,0xC0,0xFF,0x7F,0x00,0x00,0x00,",
-        "љ": "0x00,0x00,0xE0,0xF0,0x30,0x30,0xF0,0xF0,0x00,0x00,0x00,0x00,0x00,0x30,0x3F,0x1F,0x00,0x00,0x3F,0x3F,0x33,0x33,0x1E,0x0C,",
-        "њ": "0x00,0xF0,0xF0,0x00,0x00,0x00,0xF0,0xF0,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x03,0x03,0x03,0x3F,0x3F,0x33,0x33,0x1E,0x0C,",
-        "ћ": "0x00,0x30,0xFC,0xFC,0xB0,0xB0,0xB0,0xB0,0x80,0x80,0x00,0x00,0x00,0x00,0x3F,0x3F,0x01,0x01,0x01,0x01,0x01,0x3F,0x3F,0x00,",
-        "ќ": "0x00,0xF0,0xF0,0x80,0x88,0xCC,0xE4,0x70,0x30,0x10,0x00,0x00,0x00,0x3F,0x3F,0x03,0x03,0x07,0x0E,0x1C,0x38,0x30,0x20,0x00,",
-        "ѝ": "0x00,0xF0,0xF0,0x00,0x06,0x0C,0x88,0xC0,0xE0,0xF0,0xF0,0x00,0x00,0x3F,0x3F,0x1C,0x0E,0x07,0x03,0x01,0x00,0x3F,0x3F,0x00,",
-        "ў": "0x00,0x30,0xF0,0xC0,0x04,0x08,0x08,0x04,0xC0,0xF0,0x30,0x00,0x00,0x60,0xE0,0xC3,0xE7,0x7C,0x3C,0x0F,0x03,0x00,0x00,0x00,",
-        "џ": "0x00,0xF0,0xF0,0x00,0x00,0x00,0x00,0x00,0x00,0xF0,0xF0,0x00,0x00,0x3F,0x3F,0x30,0x30,0xF0,0xF0,0x30,0x30,0x3F,0x3F,0x00,",
-        "Ā": "0x00,0x00,0x00,0xE0,0xF9,0x1D,0x1D,0xF9,0xE0,0x00,0x00,0x00,0x00,0x38,0x3F,0x07,0x06,0x06,0x06,0x06,0x07,0x3F,0x38,0x00,",
-        "ā": "0x00,0x00,0x40,0x60,0x68,0x68,0x68,0x68,0x68,0xE0,0xC0,0x00,0x00,0x1C,0x3E,0x33,0x33,0x33,0x33,0x33,0x33,0x3F,0x3F,0x00,",
-        "Ă": "0x00,0x00,0x00,0xE0,0xF9,0x1A,0x1A,0xF9,0xE0,0x00,0x00,0x00,0x00,0x38,0x3F,0x07,0x06,0x06,0x06,0x06,0x07,0x3F,0x38,0x00,",
-        "ă": "0x00,0x00,0x40,0x60,0x64,0x68,0x68,0x68,0x64,0xE0,0xC0,0x00,0x00,0x1C,0x3E,0x33,0x33,0x33,0x33,0x33,0x33,0x3F,0x3F,0x00,",
-        "Ą": "0x00,0x00,0x00,0xE0,0xFC,0x1F,0x1F,0xFC,0xE0,0x00,0x00,0x00,0x00,0x38,0x3F,0x07,0x06,0x06,0x06,0x06,0x67,0xBF,0xB8,0x00,",
-        "ą": "0x00,0x00,0x40,0x60,0x60,0x60,0x60,0x60,0x60,0xE0,0xC0,0x00,0x00,0x1C,0x3E,0x33,0x33,0x33,0x33,0x33,0x73,0xBF,0xBF,0x00,",
-        "Ć": "0x00,0x80,0xE0,0x70,0x38,0x18,0x1A,0x1B,0x39,0x70,0x60,0x00,0x00,0x03,0x0F,0x1C,0x38,0x30,0x30,0x30,0x38,0x1C,0x0C,0x00,",
-        "ć": "0x00,0x80,0xC0,0xE0,0x60,0x60,0x68,0x6C,0x64,0xC0,0x80,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x30,0x18,0x08,0x00,",
-        "Ĉ": "0x00,0x80,0xE0,0x70,0x3A,0x1B,0x19,0x1B,0x3A,0x70,0x60,0x00,0x00,0x03,0x0F,0x1C,0x38,0x30,0x30,0x30,0x38,0x1C,0x0C,0x00,",
-        "ĉ": "0x00,0x80,0xC0,0xE0,0x68,0x6C,0x64,0x6C,0x68,0xC0,0x80,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x30,0x18,0x08,0x00,",
-        "Ċ": "0x00,0x80,0xE0,0x70,0x38,0x18,0x1A,0x18,0x38,0x70,0x60,0x00,0x00,0x03,0x0F,0x1C,0x38,0x30,0x30,0x30,0x38,0x1C,0x0C,0x00,",
-        "ċ": "0x00,0x80,0xC0,0xE0,0x60,0x60,0x68,0x60,0x60,0xC0,0x80,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x30,0x18,0x08,0x00,",
-        "Č": "0x00,0x80,0xE0,0x70,0x39,0x1B,0x1A,0x1B,0x39,0x70,0x60,0x00,0x00,0x03,0x0F,0x1C,0x38,0x30,0x30,0x30,0x38,0x1C,0x0C,0x00,",
-        "č": "0x00,0x80,0xC0,0xE0,0x64,0x6C,0x68,0x6C,0x64,0xC0,0x80,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x30,0x18,0x08,0x00,",
-        "Ď": "0x00,0xF8,0xF8,0x19,0x1B,0x1A,0x1B,0x39,0x70,0xE0,0x80,0x00,0x00,0x3F,0x3F,0x30,0x30,0x30,0x30,0x38,0x1C,0x0F,0x03,0x00,",
-        "ď": "0x00,0x80,0xC0,0xE0,0x60,0x60,0xE0,0xFF,0xFF,0x00,0x05,0x03,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x3F,0x3F,0x00,0x00,0x00,",
-        "Đ": "0xC0,0xFF,0xFF,0xC3,0xC3,0x03,0x03,0x07,0x0E,0xFC,0xF0,0x00,0x00,0x3F,0x3F,0x30,0x30,0x30,0x30,0x38,0x1C,0x0F,0x03,0x00,",
-        "đ": "0x00,0x80,0xC0,0xE0,0x60,0x60,0x60,0xE4,0xC4,0xFF,0xFF,0x04,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x30,0x3F,0x3F,0x00,",
-        "Ē": "0x00,0xFC,0xFC,0x8C,0x8D,0x8D,0x8D,0x8D,0x8C,0x0C,0x0C,0x00,0x00,0x3F,0x3F,0x31,0x31,0x31,0x31,0x31,0x31,0x30,0x30,0x00,",
-        "ē": "0x00,0x80,0xC0,0xE0,0x68,0x68,0x68,0x68,0x68,0xC0,0x80,0x00,0x00,0x0F,0x1F,0x3B,0x33,0x33,0x33,0x33,0x33,0x13,0x01,0x00,",
-        "Ĕ": "0x00,0xF8,0xF8,0x98,0x99,0x9A,0x9A,0x99,0x98,0x18,0x18,0x00,0x00,0x3F,0x3F,0x31,0x31,0x31,0x31,0x31,0x31,0x30,0x30,0x00,",
-        "ĕ": "0x00,0x80,0xC0,0xE0,0x64,0x68,0x68,0x68,0x64,0xC0,0x80,0x00,0x00,0x0F,0x1F,0x3B,0x33,0x33,0x33,0x33,0x33,0x13,0x01,0x00,",
-        "Ė": "0x00,0xF8,0xF8,0x98,0x98,0x98,0x9A,0x98,0x98,0x18,0x18,0x00,0x00,0x3F,0x3F,0x31,0x31,0x31,0x31,0x31,0x31,0x30,0x30,0x00,",
-        "ė": "0x00,0x80,0xC0,0xE0,0x60,0x60,0x68,0x60,0x60,0xC0,0x80,0x00,0x00,0x0F,0x1F,0x3B,0x33,0x33,0x33,0x33,0x33,0x13,0x01,0x00,",
-        "Ę": "0x00,0xFF,0xFF,0xC3,0xC3,0xC3,0xC3,0xC3,0xC3,0x03,0x03,0x00,0x00,0x3F,0x3F,0x30,0x30,0x30,0x30,0x30,0x70,0xB0,0xB0,0x00,",
-        "ę": "0x00,0x80,0xC0,0xE0,0x60,0x60,0x60,0x60,0x60,0xC0,0x80,0x00,0x00,0x0F,0x1F,0x3B,0x33,0x33,0x73,0xB3,0xB3,0x13,0x01,0x00,",
-        "Ě": "0x00,0xF8,0xF8,0x98,0x99,0x9B,0x9A,0x9B,0x99,0x18,0x18,0x00,0x00,0x3F,0x3F,0x31,0x31,0x31,0x31,0x31,0x31,0x30,0x30,0x00,",
-        "ě": "0x00,0x80,0xC0,0xE0,0x64,0x6C,0x68,0x6C,0x64,0xC0,0x80,0x00,0x00,0x0F,0x1F,0x3B,0x33,0x33,0x33,0x33,0x33,0x13,0x01,0x00,",
-        "Ĝ": "0x00,0x80,0xE0,0x70,0x1A,0x1B,0x19,0x1B,0x1A,0x38,0x30,0x00,0x00,0x03,0x0F,0x1C,0x38,0x30,0x33,0x33,0x33,0x3F,0x3F,0x00,",
-        "ĝ": "0x00,0x80,0xC0,0xE0,0x68,0x6C,0x64,0x6C,0x68,0xE0,0xE0,0x00,0x00,0x03,0xC7,0xCE,0xCC,0xCC,0xCC,0xCC,0xE6,0x7F,0x3F,0x00,",
-        "Ğ": "0x00,0x80,0xE0,0x70,0x1A,0x19,0x19,0x19,0x1A,0x38,0x30,0x00,0x00,0x03,0x0F,0x1C,0x38,0x30,0x33,0x33,0x33,0x3F,0x3F,0x00,",
-        "ğ": "0x00,0x80,0xC0,0xE0,0x68,0x64,0x64,0x64,0x68,0xE0,0xE0,0x00,0x00,0x03,0xC7,0xCE,0xCC,0xCC,0xCC,0xCC,0xE6,0x7F,0x3F,0x00,",
-        "Ġ": "0x00,0x80,0xE0,0x70,0x18,0x18,0x1A,0x18,0x18,0x38,0x30,0x00,0x00,0x03,0x0F,0x1C,0x38,0x30,0x33,0x33,0x33,0x3F,0x3F,0x00,",
-        "ġ": "0x00,0x80,0xC0,0xE0,0x60,0x60,0x68,0x60,0x60,0xE0,0xE0,0x00,0x00,0x03,0xC7,0xCE,0xCC,0xCC,0xCC,0xCC,0xE6,0x7F,0x3F,0x00,",
-        "Ģ": "0x00,0xF0,0xFC,0x0E,0x07,0x03,0xC3,0xC3,0xC3,0xC7,0xC6,0x00,0x00,0x03,0x0F,0x1C,0x38,0x30,0xB0,0x70,0x30,0x3F,0x3F,0x00,",
-        "ģ": "0x00,0x80,0xC0,0xE0,0x60,0x60,0x6C,0x6A,0x60,0xE0,0xE0,0x00,0x00,0x03,0xC7,0xCE,0xCC,0xCC,0xCC,0xCC,0xE6,0x7F,0x3F,0x00,",
-        "Ĥ": "0x00,0xFC,0xFC,0x80,0x82,0x81,0x81,0x82,0x80,0xFC,0xFC,0x00,0x00,0x3F,0x3F,0x01,0x01,0x01,0x01,0x01,0x01,0x3F,0x3F,0x00,",
-        "ĥ": "0x00,0xFE,0xFE,0xC0,0x62,0x63,0x61,0xE3,0xC2,0x80,0x00,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x00,0x00,",
-        "Ħ": "0x02,0xFF,0xFF,0xC2,0xC2,0xC2,0xC2,0xC2,0xC2,0xFF,0xFF,0x02,0x00,0x3F,0x3F,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x00,",
-        "ħ": "0x04,0xFF,0xFF,0xC4,0x64,0x60,0x60,0xE0,0xC0,0x80,0x00,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x00,0x00,",
-        "Ĩ": "0x00,0x00,0x00,0x1A,0x19,0xFB,0xFB,0x1A,0x19,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x3F,0x3F,0x30,0x30,0x00,0x00,0x00,",
-        "ĩ": "0x00,0x00,0x00,0x08,0x64,0xEC,0xE8,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x3F,0x3F,0x30,0x30,0x00,0x00,0x00,",
-        "Ī": "0x00,0x00,0x00,0x0C,0x0D,0xFD,0xFD,0x0D,0x0C,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x3F,0x3F,0x30,0x30,0x00,0x00,0x00,",
-        "ī": "0x00,0x00,0x00,0x08,0x68,0xE8,0xE8,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x3F,0x3F,0x30,0x30,0x00,0x00,0x00,",
-        "Ĭ": "0x00,0x00,0x00,0x18,0x19,0xFA,0xFA,0x19,0x18,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x3F,0x3F,0x30,0x30,0x00,0x00,0x00,",
-        "ĭ": "0x00,0x00,0x00,0x00,0x64,0xE8,0xE8,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x3F,0x3F,0x30,0x30,0x00,0x00,0x00,",
-        "Į": "0x00,0x00,0x00,0x03,0x03,0xFF,0xFF,0x03,0x03,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x7F,0xBF,0xB0,0x30,0x00,0x00,0x00,",
-        "į": "0x00,0x00,0x00,0x00,0x60,0xEC,0xEC,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x7F,0xBF,0xB0,0x30,0x00,0x00,0x00,",
-        "İ": "0x00,0x00,0x00,0x18,0x18,0xF8,0xFA,0x18,0x18,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x3F,0x3F,0x30,0x30,0x00,0x00,0x00,",
-        "ı": "0x00,0x00,0x00,0x00,0x60,0xE0,0xE0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x3F,0x3F,0x30,0x30,0x00,0x00,0x00,",
-        "IJ": "0x00,0x03,0xFF,0xFF,0x03,0x00,0x00,0x00,0x03,0xFF,0xFF,0x00,0x00,0x30,0x3F,0x3F,0x30,0x0C,0x1C,0x30,0x30,0x3F,0x1F,0x00,",
-        "ij": "0x00,0x00,0x20,0xEC,0xEC,0x00,0x00,0x20,0xEC,0xEC,0x00,0x00,0x00,0x00,0x30,0x3F,0x3F,0x70,0xC0,0xC0,0xFF,0x7F,0x00,0x00,",
-        "Ĵ": "0x00,0x00,0x00,0x00,0x02,0x03,0x01,0x03,0x02,0xF8,0xF8,0x00,0x00,0x0E,0x1E,0x38,0x30,0x30,0x30,0x30,0x38,0x1F,0x07,0x00,",
-        "ĵ": "0x00,0x00,0x00,0x00,0x00,0x08,0x6C,0xE4,0xEC,0x08,0x00,0x00,0x00,0x00,0x00,0x60,0xE0,0xC0,0xC0,0xFF,0x7F,0x00,0x00,0x00,",
-        "Ķ": "0x00,0xFF,0xFF,0xC0,0xE0,0xF0,0x38,0x1C,0x0E,0x07,0x03,0x00,0x00,0x3F,0x3F,0x00,0x01,0xA3,0x67,0x0E,0x1C,0x38,0x30,0x00,",
-        "ķ": "0x00,0x00,0xFF,0xFF,0x00,0x80,0xC0,0xE0,0x60,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x03,0xA7,0x6F,0x1C,0x38,0x30,0x00,0x00,",
-        "ĸ": "0x00,0x00,0xE0,0xE0,0x00,0x80,0xC0,0xE0,0x60,0x20,0x00,0x00,0x00,0x00,0x3F,0x3F,0x03,0x07,0x0F,0x1C,0x38,0x30,0x00,0x00,",
-        "Ĺ": "0x00,0xF8,0xFA,0x03,0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x30,0x30,0x30,0x30,0x30,0x30,0x30,0x30,0x00,",
-        "ĺ": "0x00,0x00,0x00,0x00,0x18,0xFA,0xFB,0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x3F,0x3F,0x30,0x30,0x00,0x00,0x00,",
-        "Ļ": "0x00,0xFF,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x30,0x30,0xB0,0x70,0x30,0x30,0x30,0x30,0x00,",
-        "ļ": "0x00,0x00,0x00,0x00,0x03,0xFF,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0xBF,0x7F,0x30,0x30,0x00,0x00,0x00,",
-        "Ľ": "0x00,0xFF,0xFF,0x00,0x00,0x05,0x03,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x30,0x30,0x30,0x30,0x30,0x30,0x30,0x30,0x00,",
-        "ľ": "0x00,0x00,0x00,0x00,0x03,0xFF,0xFF,0x00,0x05,0x03,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x3F,0x3F,0x30,0x30,0x00,0x00,0x00,",
-        "Ŀ": "0x00,0xFF,0xFF,0x00,0x00,0x00,0x20,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x30,0x30,0x30,0x30,0x30,0x30,0x30,0x30,0x00,",
-        "ŀ": "0x00,0x00,0x00,0x00,0x03,0xFF,0xFF,0x00,0x40,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x3F,0x3F,0x30,0x30,0x00,0x00,0x00,",
-        "Ł": "0x80,0xFF,0xFF,0x20,0x10,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x30,0x30,0x30,0x30,0x30,0x30,0x30,0x30,0x00,",
-        "ł": "0x00,0x00,0x00,0x00,0x83,0xFF,0xFF,0x20,0x10,0x00,0x00,0x00,0x00,0x00,0x00,0x31,0x30,0x3F,0x3F,0x30,0x30,0x00,0x00,0x00,",
-        "Ń": "0x00,0xFF,0xFF,0x0E,0x38,0xF2,0xC3,0x01,0x00,0xFF,0xFF,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0x03,0x07,0x1C,0x3F,0x3F,0x00,",
-        "ń": "0x00,0x00,0xE0,0xE0,0x60,0x68,0x6C,0x64,0xE0,0xC0,0x80,0x00,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x00,",
-        "Ņ": "0x00,0xFF,0xFF,0x0E,0x38,0xF0,0xC0,0x00,0x00,0xFF,0xFF,0x00,0x00,0x3F,0x3F,0x00,0x00,0xA0,0x63,0x07,0x1C,0x3F,0x3F,0x00,",
-        "ņ": "0x00,0x00,0xE0,0xE0,0x60,0x60,0x60,0x60,0xE0,0xC0,0x80,0x00,0x00,0x00,0x3F,0x3F,0x00,0x00,0xA0,0x60,0x00,0x3F,0x3F,0x00,",
-        "Ň": "0x00,0xFF,0xFF,0x0E,0x38,0xF1,0xC2,0x01,0x00,0xFF,0xFF,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0x03,0x07,0x1C,0x3F,0x3F,0x00,",
-        "ň": "0x00,0x00,0xE0,0xE0,0x64,0x6C,0x68,0x6C,0xE4,0xC0,0x80,0x00,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x00,",
-        "ʼn": "0x00,0x0A,0xE6,0xE0,0x60,0x60,0x60,0x60,0xE0,0xC0,0x80,0x00,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x00,",
-        "Ŋ": "0x00,0x00,0xFF,0xFF,0x06,0x03,0x03,0x03,0x07,0xFE,0xFC,0x00,0x00,0x00,0x3F,0x3F,0x00,0x00,0x20,0x20,0x30,0x1F,0x0F,0x00,",
-        "ŋ": "0x00,0x00,0xE0,0xE0,0x60,0x60,0x60,0x60,0xE0,0xC0,0x80,0x00,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0xC0,0xC0,0xFF,0x7F,0x00,",
-        "Ō": "0x00,0xC0,0xF0,0x38,0x1D,0x0D,0x0D,0x1D,0x38,0xF0,0xC0,0x00,0x00,0x03,0x0F,0x1C,0x38,0x30,0x30,0x38,0x1C,0x0F,0x03,0x00,",
-        "ō": "0x00,0x80,0xC0,0xE0,0x68,0x68,0x68,0x68,0xE0,0xC0,0x80,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x38,0x1F,0x0F,0x00,",
-        "Ŏ": "0x00,0x80,0xE0,0x70,0x39,0x1A,0x1A,0x39,0x70,0xE0,0x80,0x00,0x00,0x03,0x0F,0x1C,0x38,0x30,0x30,0x38,0x1C,0x0F,0x03,0x00,",
-        "ŏ": "0x00,0x80,0xC0,0xE0,0x64,0x68,0x68,0x64,0xE0,0xC0,0x80,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x38,0x1F,0x0F,0x00,",
-        "Ő": "0x00,0x80,0xE0,0x70,0x3A,0x19,0x1A,0x39,0x70,0xE0,0x80,0x00,0x00,0x03,0x0F,0x1C,0x38,0x30,0x30,0x38,0x1C,0x0F,0x03,0x00,",
-        "ő": "0x00,0x80,0xC0,0xE0,0x68,0x64,0x68,0x64,0xE0,0xC0,0x80,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x38,0x1F,0x0F,0x00,",
-        "Œ": "0xF0,0xFC,0x0E,0x03,0x03,0x07,0xFE,0xFF,0xC3,0xC3,0xC3,0x00,0x03,0x0F,0x1C,0x30,0x30,0x38,0x1F,0x3F,0x30,0x30,0x30,0x00,",
-        "œ": "0x80,0xC0,0xE0,0x60,0x60,0xE0,0xC0,0x60,0x60,0x60,0x40,0x80,0x0F,0x1F,0x38,0x30,0x30,0x1F,0x1F,0x3B,0x33,0x33,0x1B,0x09,",
-        "Ŕ": "0x00,0xF8,0xF8,0x98,0x98,0x9A,0x9B,0x99,0xF8,0xF0,0x60,0x00,0x00,0x3F,0x3F,0x01,0x01,0x03,0x07,0x0F,0x1D,0x38,0x30,0x00,",
-        "ŕ": "0x00,0x00,0xE0,0xE0,0xC0,0x60,0x68,0x6C,0x64,0xE0,0xC0,0x00,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,",
-        "Ŗ": "0x00,0xFF,0xFF,0x83,0x83,0x83,0x83,0x83,0xC7,0xFE,0x7C,0x00,0x00,0x3F,0x3F,0x01,0x01,0xA3,0x67,0x0F,0x1D,0x38,0x30,0x00,",
-        "ŗ": "0x00,0x00,0xE0,0xE0,0xC0,0x60,0x60,0x60,0x60,0xE0,0xC0,0x00,0x00,0x00,0x3F,0x3F,0x00,0xA0,0x60,0x00,0x00,0x00,0x00,0x00,",
-        "Ř": "0x00,0xF8,0xF8,0x99,0x9B,0x9A,0x9B,0x99,0xF8,0xF0,0x60,0x00,0x00,0x3F,0x3F,0x01,0x01,0x03,0x07,0x0F,0x1D,0x38,0x30,0x00,",
-        "ř": "0x00,0x00,0xE0,0xE0,0xC4,0x6C,0x68,0x6C,0x64,0xE0,0xC0,0x00,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,",
-        "Ś": "0x00,0x60,0xF0,0xF8,0x98,0x9A,0x9B,0x99,0x98,0x30,0x20,0x00,0x00,0x0C,0x1C,0x39,0x31,0x31,0x31,0x31,0x3B,0x1F,0x0E,0x00,",
-        "ś": "0x00,0xC0,0xE0,0x60,0x68,0x6C,0x64,0x60,0x40,0x00,0x00,0x00,0x00,0x11,0x33,0x33,0x33,0x33,0x33,0x3F,0x1E,0x00,0x00,0x00,",
-        "Ŝ": "0x00,0x60,0xF0,0xF8,0x9A,0x9B,0x99,0x9B,0x9A,0x30,0x20,0x00,0x00,0x0C,0x1C,0x39,0x31,0x31,0x31,0x31,0x3B,0x1F,0x0E,0x00,",
-        "ŝ": "0x00,0xC0,0xE0,0x68,0x6C,0x64,0x6C,0x68,0x40,0x00,0x00,0x00,0x00,0x11,0x33,0x33,0x33,0x33,0x33,0x3F,0x1E,0x00,0x00,0x00,",
-        "Ş": "0x00,0x3C,0x7E,0xE7,0xC3,0xC3,0xC3,0xC3,0xC7,0x8E,0x0C,0x00,0x00,0x0C,0x1C,0x38,0x30,0xB0,0xF0,0x30,0x39,0x1F,0x0F,0x00,",
-        "ş": "0x00,0xC0,0xE0,0x60,0x60,0x60,0x60,0x60,0x40,0x00,0x00,0x00,0x00,0x11,0x33,0x33,0xB3,0xF3,0x33,0x3F,0x1E,0x00,0x00,0x00,",
-        "Š": "0x00,0x60,0xF0,0xF8,0x99,0x9B,0x9A,0x9B,0x99,0x30,0x20,0x00,0x00,0x0C,0x1C,0x39,0x31,0x31,0x31,0x31,0x3B,0x1F,0x0E,0x00,",
-        "š": "0x00,0xC0,0xE0,0x64,0x6C,0x68,0x6C,0x64,0x40,0x00,0x00,0x00,0x00,0x11,0x33,0x33,0x33,0x33,0x33,0x3F,0x1E,0x00,0x00,0x00,",
-        "Ţ": "0x00,0x00,0x03,0x03,0x03,0xFF,0xFF,0x03,0x03,0x03,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xBF,0xBF,0x60,0x00,0x00,0x00,0x00,",
-        "ţ": "0x00,0x60,0x60,0xFE,0xFE,0x60,0x60,0x60,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x1F,0x3F,0xB0,0xB0,0xF0,0x30,0x00,0x00,0x00,",
-        "Ť": "0x00,0x00,0x18,0x19,0x1B,0xFA,0xFA,0x1B,0x19,0x18,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0x00,0x00,",
-        "ť": "0x00,0x60,0x60,0xFE,0xFE,0x60,0x65,0x63,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x1F,0x3F,0x30,0x30,0x30,0x30,0x00,0x00,0x00,",
-        "Ŧ": "0x00,0x00,0x03,0xC3,0xC3,0xFF,0xFF,0xC3,0xC3,0x03,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0x00,0x00,",
-        "ŧ": "0x00,0x30,0x30,0xFE,0xFE,0x30,0x30,0x30,0x00,0x00,0x00,0x00,0x00,0x03,0x03,0x1F,0x3F,0x33,0x33,0x30,0x30,0x00,0x00,0x00,",
-        "Ũ": "0x00,0xF8,0xF8,0x02,0x01,0x03,0x03,0x02,0x01,0xF8,0xF8,0x00,0x00,0x07,0x1F,0x38,0x30,0x30,0x30,0x30,0x38,0x1F,0x07,0x00,",
-        "ũ": "0x00,0xE0,0xE0,0x08,0x04,0x0C,0x0C,0x08,0x04,0xE0,0xE0,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x18,0x3F,0x3F,0x00,",
-        "Ū": "0x00,0xFC,0xFC,0x00,0x01,0x01,0x01,0x01,0x00,0xFC,0xFC,0x00,0x00,0x07,0x1F,0x38,0x30,0x30,0x30,0x30,0x38,0x1F,0x07,0x00,",
-        "ū": "0x00,0xE0,0xE0,0x00,0x08,0x08,0x08,0x08,0x00,0xE0,0xE0,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x18,0x3F,0x3F,0x00,",
-        "Ŭ": "0x00,0xFC,0xFC,0x00,0x01,0x02,0x02,0x01,0x00,0xFC,0xFC,0x00,0x00,0x07,0x1F,0x38,0x30,0x30,0x30,0x30,0x38,0x1F,0x07,0x00,",
-        "ŭ": "0x00,0xE0,0xE0,0x00,0x04,0x08,0x08,0x04,0x00,0xE0,0xE0,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x18,0x3F,0x3F,0x00,",
-        "Ů": "0x00,0xF8,0xF8,0x00,0x06,0x09,0x09,0x06,0x00,0xF8,0xF8,0x00,0x00,0x07,0x1F,0x38,0x30,0x30,0x30,0x30,0x38,0x1F,0x07,0x00,",
-        "ů": "0x00,0xE0,0xE0,0x00,0x0C,0x12,0x12,0x0C,0x00,0xE0,0xE0,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x18,0x3F,0x3F,0x00,",
-        "Ű": "0x00,0xF8,0xF8,0x00,0x02,0x01,0x02,0x01,0x00,0xF8,0xF8,0x00,0x00,0x07,0x1F,0x38,0x30,0x30,0x30,0x30,0x38,0x1F,0x07,0x00,",
-        "ű": "0x00,0xE0,0xE0,0x00,0x08,0x04,0x08,0x04,0x00,0xE0,0xE0,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x18,0x3F,0x3F,0x00,",
-        "Ų": "0x00,0xFF,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0xFF,0x00,0x00,0x07,0x1F,0x38,0x30,0xF0,0xB0,0xB0,0x38,0x1F,0x07,0x00,",
-        "ų": "0x00,0xE0,0xE0,0x00,0x00,0x00,0x00,0x00,0x00,0xE0,0xE0,0x00,0x00,0x0F,0x1F,0x38,0x30,0xF0,0xB0,0xB0,0x18,0x3F,0x3F,0x00,",
-        "Ŵ": "0x00,0xFC,0xFC,0x00,0x02,0x81,0x81,0x02,0x00,0xFC,0xFC,0x00,0x00,0x3F,0x3F,0x1C,0x06,0x03,0x03,0x06,0x1C,0x3F,0x3F,0x00,",
-        "ŵ": "0x00,0xE0,0xE0,0x00,0x04,0xE8,0xE8,0x04,0x00,0xE0,0xE0,0x00,0x00,0x07,0x1F,0x38,0x1C,0x0F,0x0F,0x1C,0x38,0x1F,0x07,0x00,",
-        "Ŷ": "0x00,0x02,0x0E,0x3C,0xF2,0xC1,0xC1,0xF2,0x3C,0x0E,0x02,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0x00,0x00,",
-        "ŷ": "0x00,0x00,0x60,0xE0,0x88,0x04,0x04,0x88,0xE0,0x60,0x00,0x00,0x00,0x00,0x00,0x81,0xE7,0x7E,0x1E,0x07,0x01,0x00,0x00,0x00,",
-        "Ÿ": "0x00,0x02,0x0E,0x3C,0xF1,0xC0,0xC0,0xF1,0x3C,0x0E,0x02,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0x00,0x00,",
-        "Ź": "0x00,0x18,0x18,0x18,0x18,0x1A,0x9B,0xD9,0xF8,0x78,0x38,0x00,0x00,0x30,0x38,0x3C,0x3E,0x37,0x33,0x31,0x30,0x30,0x30,0x00,",
-        "ź": "0x00,0x60,0x60,0x60,0x68,0x6C,0xE4,0xE0,0x60,0x20,0x00,0x00,0x00,0x30,0x38,0x3C,0x36,0x33,0x31,0x30,0x30,0x30,0x00,0x00,",
-        "Ż": "0x00,0x18,0x18,0x18,0x18,0x18,0x9A,0xD8,0xF8,0x78,0x38,0x00,0x00,0x30,0x38,0x3C,0x3E,0x37,0x33,0x31,0x30,0x30,0x30,0x00,",
-        "ż": "0x00,0x60,0x60,0x60,0x60,0x68,0xE0,0xE0,0x60,0x20,0x00,0x00,0x00,0x30,0x38,0x3C,0x36,0x33,0x31,0x30,0x30,0x30,0x00,0x00,",
-        "Ž": "0x00,0x18,0x18,0x18,0x19,0x1B,0x9A,0xDB,0xF9,0x78,0x38,0x00,0x00,0x30,0x38,0x3C,0x3E,0x37,0x33,0x31,0x30,0x30,0x30,0x00,",
-        "ž": "0x00,0x60,0x60,0x64,0x6C,0x68,0xEC,0xE4,0x60,0x20,0x00,0x00,0x00,0x30,0x38,0x3C,0x36,0x33,0x31,0x30,0x30,0x30,0x00,0x00,",
-        "ſ": "0x00,0x00,0x00,0x00,0xFC,0xFE,0x06,0x06,0x0E,0x0C,0x00,0x00,0x00,0x00,0x30,0x30,0x3F,0x3F,0x30,0x00,0x00,0x00,0x00,0x00,",
-    }
-    return font
-
-
-def getSmallFontMap():
-    font = {
-        " ": "0x00, 0x00, 0x00, 0x00, 0x00, 0x00,",
-        "!": "0x00, 0x00, 0x4f, 0x00, 0x00, 0x00,",
-        '"': "0x00, 0x07, 0x00, 0x07, 0x00, 0x00,",
-        "#": "0x14, 0x7f, 0x14, 0x7f, 0x14, 0x00,",
-        "$": "0x24, 0x2a, 0x7f, 0x2a, 0x12, 0x00,",
-        "%": "0x23, 0x13, 0x08, 0x64, 0x62, 0x00,",
-        "&": "0x36, 0x49, 0x56, 0x20, 0x58, 0x00,",
-        "'": "0x00, 0x05, 0x03, 0x00, 0x00, 0x00,",
-        "(": "0x00, 0x1c, 0x22, 0x41, 0x00, 0x00,",
-        ")": "0x00, 0x41, 0x22, 0x1c, 0x00, 0x00,",
-        "*": "0x14, 0x08, 0x3e, 0x08, 0x14, 0x00,",
-        "+": "0x08, 0x08, 0x3e, 0x08, 0x08, 0x00,",
-        ",": "0x00, 0x50, 0x30, 0x00, 0x00, 0x00,",
-        "-": "0x08, 0x08, 0x08, 0x08, 0x08, 0x00,",
-        ".": "0x00, 0x60, 0x60, 0x00, 0x00, 0x00,",
-        "/": "0x20, 0x10, 0x08, 0x04, 0x02, 0x00,",
-        "0": "0x3e, 0x51, 0x49, 0x45, 0x3e, 0x00,",
-        "1": "0x00, 0x42, 0x7f, 0x40, 0x00, 0x00,",
-        "2": "0x42, 0x61, 0x51, 0x49, 0x46, 0x00,",
-        "3": "0x21, 0x41, 0x45, 0x4b, 0x31, 0x00,",
-        "4": "0x18, 0x14, 0x12, 0x7f, 0x10, 0x00,",
-        "5": "0x27, 0x45, 0x45, 0x45, 0x39, 0x00,",
-        "6": "0x3c, 0x4a, 0x49, 0x49, 0x30, 0x00,",
-        "7": "0x01, 0x71, 0x09, 0x05, 0x03, 0x00,",
-        "8": "0x36, 0x49, 0x49, 0x49, 0x36, 0x00,",
-        "9": "0x06, 0x49, 0x49, 0x29, 0x1e, 0x00,",
-        ":": "0x00, 0x36, 0x36, 0x00, 0x00, 0x00,",
-        ";": "0x00, 0x56, 0x36, 0x00, 0x00, 0x00,",
-        "<": "0x08, 0x14, 0x22, 0x41, 0x00, 0x00,",
-        "=": "0x14, 0x14, 0x14, 0x14, 0x14, 0x00,",
-        ">": "0x00, 0x41, 0x22, 0x14, 0x08, 0x00,",
-        "?": "0x02, 0x01, 0x51, 0x09, 0x06, 0x00,",
-        "@": "0x32, 0x49, 0x79, 0x41, 0x3e, 0x00,",
-        "A": "0x7e, 0x09, 0x09, 0x09, 0x7e, 0x00,",
-        "B": "0x7f, 0x49, 0x49, 0x49, 0x36, 0x00,",
-        "C": "0x3e, 0x41, 0x41, 0x41, 0x22, 0x00,",
-        "D": "0x7f, 0x41, 0x41, 0x22, 0x1c, 0x00,",
-        "E": "0x7f, 0x49, 0x49, 0x49, 0x41, 0x00,",
-        "F": "0x7f, 0x09, 0x09, 0x09, 0x01, 0x00,",
-        "G": "0x3e, 0x41, 0x41, 0x49, 0x7a, 0x00,",
-        "H": "0x7f, 0x08, 0x08, 0x08, 0x7f, 0x00,",
-        "I": "0x00, 0x41, 0x7f, 0x41, 0x00, 0x00,",
-        "J": "0x20, 0x40, 0x41, 0x3f, 0x01, 0x00,",
-        "K": "0x7f, 0x08, 0x14, 0x22, 0x41, 0x00,",
-        "L": "0x7f, 0x40, 0x40, 0x40, 0x40, 0x00,",
-        "M": "0x7f, 0x02, 0x0c, 0x02, 0x7f, 0x00,",
-        "N": "0x7f, 0x04, 0x08, 0x10, 0x7f, 0x00,",
-        "O": "0x3e, 0x41, 0x41, 0x41, 0x3e, 0x00,",
-        "P": "0x7f, 0x09, 0x09, 0x09, 0x06, 0x00,",
-        "Q": "0x3e, 0x41, 0x51, 0x21, 0x5e, 0x00,",
-        "R": "0x7f, 0x09, 0x19, 0x29, 0x46, 0x00,",
-        "S": "0x26, 0x49, 0x49, 0x49, 0x32, 0x00,",
-        "T": "0x01, 0x01, 0x7f, 0x01, 0x01, 0x00,",
-        "U": "0x3f, 0x40, 0x40, 0x40, 0x3f, 0x00,",
-        "V": "0x1f, 0x20, 0x40, 0x20, 0x1f, 0x00,",
-        "W": "0x3f, 0x40, 0x38, 0x40, 0x3f, 0x00,",
-        "X": "0x63, 0x14, 0x08, 0x14, 0x63, 0x00,",
-        "Y": "0x07, 0x08, 0x70, 0x08, 0x07, 0x00,",
-        "Z": "0x61, 0x51, 0x49, 0x45, 0x43, 0x00,",
-        "[": "0x00, 0x7f, 0x41, 0x41, 0x00, 0x00,",
-        "\\": "0x02, 0x04, 0x08, 0x10, 0x20, 0x00,",
-        "]": "0x00, 0x41, 0x41, 0x7f, 0x00, 0x00,",
-        "^": "0x04, 0x02, 0x01, 0x02, 0x04, 0x00,",
-        "_": "0x40, 0x40, 0x40, 0x40, 0x40, 0x00,",
-        "`": "0x00, 0x03, 0x05, 0x00, 0x00, 0x00,",
-        "a": "0x20, 0x54, 0x54, 0x54, 0x78, 0x00,",
-        "b": "0x7f, 0x48, 0x44, 0x44, 0x38, 0x00,",
-        "c": "0x38, 0x44, 0x44, 0x44, 0x20, 0x00,",
-        "d": "0x38, 0x44, 0x44, 0x48, 0x7f, 0x00,",
-        "e": "0x38, 0x54, 0x54, 0x54, 0x18, 0x00,",
-        "f": "0x00, 0x04, 0x7e, 0x05, 0x01, 0x00,",
-        "g": "0x08, 0x54, 0x54, 0x54, 0x3c, 0x00,",
-        "h": "0x7f, 0x08, 0x04, 0x04, 0x78, 0x00,",
-        "i": "0x00, 0x44, 0x7d, 0x40, 0x00, 0x00,",
-        "j": "0x20, 0x40, 0x44, 0x3d, 0x00, 0x00,",
-        "k": "0x00, 0x7f, 0x10, 0x28, 0x44, 0x00,",
-        "l": "0x00, 0x41, 0x7f, 0x40, 0x00, 0x00,",
-        "m": "0x7c, 0x04, 0x78, 0x04, 0x78, 0x00,",
-        "n": "0x7c, 0x08, 0x04, 0x04, 0x78, 0x00,",
-        "o": "0x38, 0x44, 0x44, 0x44, 0x38, 0x00,",
-        "p": "0x7c, 0x14, 0x14, 0x14, 0x08, 0x00,",
-        "q": "0x08, 0x14, 0x14, 0x14, 0x7c, 0x00,",
-        "r": "0x7c, 0x08, 0x04, 0x04, 0x08, 0x00,",
-        "s": "0x48, 0x54, 0x54, 0x54, 0x24, 0x00,",
-        "t": "0x04, 0x3e, 0x44, 0x40, 0x20, 0x00,",
-        "u": "0x3c, 0x40, 0x40, 0x20, 0x7c, 0x00,",
-        "v": "0x0c, 0x30, 0x40, 0x30, 0x0c, 0x00,",
-        "w": "0x3c, 0x40, 0x30, 0x40, 0x3c, 0x00,",
-        "x": "0x44, 0x24, 0x38, 0x48, 0x44, 0x00,",
-        "y": "0x44, 0x48, 0x30, 0x10, 0x0c, 0x00,",
-        "z": "0x44, 0x64, 0x54, 0x4c, 0x44, 0x00,",
-        "{": "0x08, 0x36, 0x41, 0x00, 0x00, 0x00,",
-        "|": "0x00, 0x00, 0x77, 0x00, 0x00, 0x00,",
-        "}": "0x00, 0x00, 0x41, 0x36, 0x08, 0x00,",
-        "~": "0x02, 0x01, 0x02, 0x04, 0x02, 0x00,",
-        "^": "0x04, 0x02, 0x01, 0x02, 0x04, 0x00,",
-        "¡": "0x00, 0x00, 0x79, 0x00, 0x00, 0x00,",
-        "¢": "0x1c, 0x22, 0x7f, 0x22, 0x10, 0x00,",
-        "£": "0x50, 0x7e, 0x51, 0x41, 0x42, 0x00,",
-        "¤": "0x22, 0x1c, 0x14, 0x1c, 0x22, 0x00,",
-        "¥": "0x15, 0x16, 0x7c, 0x16, 0x15, 0x00,",
-        "¦": "0x00, 0x00, 0x77, 0x00, 0x00, 0x00,",
-        "§": "0x4a, 0x55, 0x55, 0x55, 0x29, 0x00,",
-        "¨": "0x00, 0x01, 0x00, 0x01, 0x00, 0x00,",
-        "©": "0x00, 0x18, 0x24, 0x24, 0x00, 0x00,",
-        "«": "0x08, 0x14, 0x00, 0x08, 0x14, 0x00,",
-        "¬": "0x08, 0x08, 0x08, 0x08, 0x38, 0x00,",
-        "­": "0x08, 0x08, 0x08, 0x08, 0x08, 0x00,",
-        "¯": "0x00, 0x01, 0x01, 0x01, 0x00, 0x00,",
-        "°": "0x00, 0x00, 0x07, 0x05, 0x07, 0x00,",
-        "±": "0x44, 0x44, 0x5f, 0x44, 0x44, 0x00,",
-        "²": "0x1d, 0x15, 0x17, 0x00, 0x00, 0x00,",
-        "³": "0x15, 0x15, 0x1f, 0x00, 0x00, 0x00,",
-        "´": "0x00, 0x04, 0x02, 0x01, 0x00, 0x00,",
-        "µ": "0x7c, 0x10, 0x10, 0x0c, 0x10, 0x00,",
-        "¶": "0x02, 0x07, 0x7f, 0x01, 0x7f, 0x00,",
-        "·": "0x00, 0x00, 0x08, 0x00, 0x00, 0x00,",
-        "¸": "0x00, 0x40, 0x60, 0x00, 0x00, 0x00,",
-        "¹": "0x12, 0x1f, 0x10, 0x00, 0x00, 0x00,",
-        "º": "0x07, 0x05, 0x07, 0x00, 0x00, 0x00,",
-        "»": "0x14, 0x08, 0x00, 0x14, 0x08, 0x00,",
-        "¼": "0x21, 0x17, 0x38, 0x24, 0x72, 0x00,",
-        "½": "0x21, 0x17, 0x78, 0x54, 0x5e, 0x00,",
-        "¿": "0x30, 0x48, 0x45, 0x40, 0x20, 0x00,",
-        "À": "0x78, 0x15, 0x16, 0x14, 0x78, 0x00,",
-        "Á": "0x78, 0x14, 0x16, 0x15, 0x78, 0x00,",
-        "Â": "0x78, 0x16, 0x15, 0x16, 0x78, 0x00,",
-        "Ã": "0x7a, 0x29, 0x2a, 0x79, 0x00, 0x00,",
-        "Ä": "0x78, 0x15, 0x14, 0x15, 0x78, 0x00,",
-        "Å": "0x78, 0x14, 0x15, 0x14, 0x78, 0x00,",
-        "Æ": "0x7e, 0x09, 0x7f, 0x49, 0x49, 0x00,",
-        "Ç": "0x0e, 0x51, 0x71, 0x11, 0x08, 0x00,",
-        "È": "0x7c, 0x55, 0x56, 0x44, 0x44, 0x00,",
-        "É": "0x7c, 0x54, 0x56, 0x45, 0x44, 0x00,",
-        "Ê": "0x7c, 0x56, 0x55, 0x46, 0x44, 0x00,",
-        "Ë": "0x7c, 0x55, 0x54, 0x45, 0x44, 0x00,",
-        "Ì": "0x00, 0x49, 0x7a, 0x48, 0x00, 0x00,",
-        "Í": "0x00, 0x48, 0x7a, 0x49, 0x00, 0x00,",
-        "Î": "0x00, 0x4a, 0x79, 0x4a, 0x00, 0x00,",
-        "Ï": "0x44, 0x45, 0x7c, 0x45, 0x44, 0x00,",
-        "Ð": "0x08, 0x7f, 0x49, 0x22, 0x1c, 0x00,",
-        "Ñ": "0x7a, 0x11, 0x22, 0x79, 0x00, 0x00,",
-        "Ò": "0x38, 0x45, 0x46, 0x44, 0x38, 0x00,",
-        "Ó": "0x38, 0x44, 0x46, 0x45, 0x38, 0x00,",
-        "Ô": "0x38, 0x46, 0x45, 0x46, 0x38, 0x00,",
-        "Õ": "0x32, 0x49, 0x4a, 0x31, 0x00, 0x00,",
-        "Ö": "0x38, 0x45, 0x44, 0x45, 0x38, 0x00,",
-        "ő": "0x38, 0x45, 0x44, 0x45, 0x38, 0x00,",
-        "×": "0x22, 0x14, 0x08, 0x14, 0x22, 0x00,",
-        "Ø": "0x58, 0x24, 0x54, 0x48, 0x34, 0x00,",
-        "Ù": "0x38, 0x41, 0x42, 0x40, 0x38, 0x00,",
-        "Ú": "0x38, 0x40, 0x42, 0x41, 0x38, 0x00,",
-        "Û": "0x38, 0x42, 0x41, 0x42, 0x38, 0x00,",
-        "Ü": "0x3c, 0x41, 0x40, 0x41, 0x3c, 0x00,",
-        "Ý": "0x04, 0x08, 0x72, 0x09, 0x04, 0x00,",
-        "Þ": "0x7f, 0x22, 0x22, 0x22, 0x1c, 0x00,",
-        "ß": "0x7e, 0x11, 0x25, 0x25, 0x1a, 0x00,",
-        "à": "0x20, 0x55, 0x56, 0x54, 0x78, 0x00,",
-        "á": "0x20, 0x54, 0x56, 0x55, 0x78, 0x00,",
-        "â": "0x20, 0x56, 0x55, 0x56, 0x78, 0x00,",
-        "ã": "0x22, 0x55, 0x56, 0x55, 0x78, 0x00,",
-        "ä": "0x20, 0x55, 0x54, 0x55, 0x78, 0x00,",
-        "å": "0x20, 0x54, 0x55, 0x54, 0x78, 0x00,",
-        "æ": "0x24, 0x54, 0x7c, 0x54, 0x48, 0x00,",
-        "ç": "0x1c, 0x22, 0x62, 0x22, 0x10, 0x00,",
-        "è": "0x38, 0x55, 0x56, 0x54, 0x08, 0x00,",
-        "é": "0x38, 0x54, 0x56, 0x55, 0x08, 0x00,",
-        "ê": "0x38, 0x56, 0x55, 0x56, 0x08, 0x00,",
-        "ë": "0x38, 0x55, 0x54, 0x55, 0x08, 0x00,",
-        "ì": "0x00, 0x45, 0x7e, 0x40, 0x00, 0x00,",
-        "í": "0x00, 0x44, 0x7e, 0x41, 0x00, 0x00,",
-        "î": "0x00, 0x46, 0x7d, 0x42, 0x00, 0x00,",
-        "ï": "0x00, 0x45, 0x7c, 0x41, 0x00, 0x00,",
-        "ñ": "0x78, 0x12, 0x09, 0x0a, 0x71, 0x00,",
-        "ò": "0x38, 0x45, 0x46, 0x44, 0x38, 0x00,",
-        "ó": "0x38, 0x44, 0x46, 0x45, 0x38, 0x00,",
-        "ô": "0x38, 0x46, 0x45, 0x46, 0x38, 0x00,",
-        "õ": "0x32, 0x49, 0x4a, 0x31, 0x00, 0x00,",
-        "ö": "0x38, 0x45, 0x44, 0x45, 0x38, 0x00,",
-        "÷": "0x08, 0x08, 0x2a, 0x08, 0x08, 0x00,",
-        "ø": "0x58, 0x24, 0x54, 0x48, 0x34, 0x00,",
-        "ù": "0x3c, 0x41, 0x42, 0x20, 0x7c, 0x00,",
-        "ú": "0x3c, 0x40, 0x42, 0x21, 0x7c, 0x00,",
-        "û": "0x3c, 0x42, 0x41, 0x22, 0x7c, 0x00,",
-        "ü": "0x3c, 0x41, 0x40, 0x21, 0x5c, 0x00,",
-        "ű": "0x3c, 0x41, 0x40, 0x21, 0x5c, 0x00,",
-        "ų": "0x3C, 0x40, 0x40, 0x20, 0xDC, 0x80,",
-        "ý": "0x44, 0x48, 0x32, 0x11, 0x0c, 0x00,",
-        "þ": "0x7c, 0x28, 0x28, 0x10, 0x00, 0x00,",
-        "ÿ": "0x44, 0x49, 0x30, 0x11, 0x0c, 0x00,",
-        "Ѐ": "0x7c, 0x55, 0x56, 0x44, 0x44, 0x00,",
-        "Ё": "0x7c, 0x55, 0x54, 0x45, 0x44, 0x00,",
-        "Ђ": "0x01, 0x7f, 0x09, 0x49, 0x31, 0x00,",
-        "Ѓ": "0x7c, 0x04, 0x06, 0x05, 0x04, 0x00,",
-        "Є": "0x3e, 0x49, 0x49, 0x41, 0x00, 0x00,",
-        "Ѕ": "0x06, 0x49, 0x49, 0x49, 0x30, 0x00,",
-        "І": "0x41, 0x41, 0x7f, 0x41, 0x41, 0x00,",
-        "Ї": "0x44, 0x45, 0x7c, 0x45, 0x44, 0x00,",
-        "Ј": "0x20, 0x40, 0x41, 0x3f, 0x01, 0x00,",
-        "Љ": "0x7f, 0x01, 0x7f, 0x48, 0x30, 0x00,",
-        "Њ": "0x7f, 0x08, 0x7f, 0x48, 0x30, 0x00,",
-        "Ћ": "0x01, 0x01, 0x7f, 0x09, 0x71, 0x00,",
-        "Ќ": "0x7c, 0x12, 0x29, 0x44, 0x00, 0x00,",
-        "Ѝ": "0x7c, 0x21, 0x12, 0x08, 0x7c, 0x00,",
-        "Ў": "0x44, 0x49, 0x32, 0x09, 0x04, 0x00,",
-        "Џ": "0x3f, 0x20, 0x60, 0x20, 0x3f, 0x00,",
-        "А": "0x7e, 0x09, 0x09, 0x09, 0x7e, 0x00,",
-        "Б": "0x7f, 0x49, 0x49, 0x49, 0x31, 0x00,",
-        "В": "0x7f, 0x49, 0x49, 0x49, 0x36, 0x00,",
-        "Г": "0x7f, 0x01, 0x01, 0x01, 0x01, 0x00,",
-        "Д": "0x60, 0x3f, 0x21, 0x3f, 0x60, 0x00,",
-        "Е": "0x7f, 0x49, 0x49, 0x49, 0x41, 0x00,",
-        "Ж": "0x77, 0x08, 0x7f, 0x08, 0x77, 0x00,",
-        "З": "0x00, 0x41, 0x49, 0x49, 0x36, 0x00,",
-        "И": "0x7f, 0x10, 0x08, 0x04, 0x7f, 0x00,",
-        "Й": "0x7c, 0x21, 0x12, 0x09, 0x7c, 0x00,",
-        "К": "0x7f, 0x08, 0x14, 0x22, 0x41, 0x00,",
-        "Л": "0x40, 0x3f, 0x01, 0x01, 0x7f, 0x00,",
-        "М": "0x7f, 0x02, 0x04, 0x02, 0x7f, 0x00,",
-        "Н": "0x7f, 0x08, 0x08, 0x08, 0x7f, 0x00,",
-        "О": "0x3e, 0x41, 0x41, 0x41, 0x3e, 0x00,",
-        "П": "0x7f, 0x01, 0x01, 0x01, 0x7f, 0x00,",
-        "Р": "0x7f, 0x09, 0x09, 0x09, 0x06, 0x00,",
-        "С": "0x3e, 0x41, 0x41, 0x41, 0x22, 0x00,",
-        "Т": "0x01, 0x01, 0x7f, 0x01, 0x01, 0x00,",
-        "У": "0x47, 0x48, 0x30, 0x08, 0x07, 0x00,",
-        "Ф": "0x0c, 0x12, 0x7f, 0x12, 0x0c, 0x00,",
-        "Х": "0x63, 0x14, 0x08, 0x14, 0x63, 0x00,",
-        "Ц": "0x3f, 0x20, 0x20, 0x3f, 0x60, 0x00,",
-        "Ч": "0x07, 0x08, 0x08, 0x08, 0x7f, 0x00,",
-        "Ш": "0x3f, 0x20, 0x3f, 0x20, 0x3f, 0x00,",
-        "Щ": "0x3f, 0x20, 0x3f, 0x20, 0x3f, 0x60,",
-        "Ъ": "0x01, 0x7f, 0x48, 0x48, 0x30, 0x00,",
-        "Ы": "0x7f, 0x48, 0x30, 0x00, 0x7f, 0x00,",
-        "Ь": "0x00, 0x7f, 0x48, 0x48, 0x30, 0x00,",
-        "Э": "0x22, 0x49, 0x49, 0x2a, 0x1c, 0x00,",
-        "Ю": "0x7f, 0x08, 0x3e, 0x41, 0x3e, 0x00,",
-        "Я": "0x46, 0x29, 0x19, 0x09, 0x7f, 0x00,",
-        "а": "0x20, 0x54, 0x54, 0x54, 0x78, 0x00,",
-        "б": "0x3c, 0x4a, 0x4a, 0x4a, 0x30, 0x00,",
-        "в": "0x7c, 0x54, 0x54, 0x54, 0x28, 0x00,",
-        "г": "0x7c, 0x04, 0x04, 0x04, 0x04, 0x00,",
-        "д": "0x40, 0x3c, 0x24, 0x3c, 0x60, 0x00,",
-        "е": "0x38, 0x54, 0x54, 0x54, 0x18, 0x00,",
-        "ж": "0x6c, 0x10, 0x7c, 0x10, 0x6c, 0x00,",
-        "з": "0x28, 0x44, 0x54, 0x54, 0x28, 0x00,",
-        "и": "0x7c, 0x20, 0x10, 0x08, 0x7c, 0x00,",
-        "й": "0x7c, 0x21, 0x12, 0x09, 0x7c, 0x00,",
-        "к": "0x7c, 0x10, 0x28, 0x44, 0x00, 0x00,",
-        "л": "0x40, 0x3c, 0x04, 0x04, 0x7c, 0x00,",
-        "м": "0x7c, 0x08, 0x10, 0x08, 0x7c, 0x00,",
-        "н": "0x7c, 0x10, 0x10, 0x10, 0x7c, 0x00,",
-        "о": "0x38, 0x44, 0x44, 0x44, 0x38, 0x00,",
-        "п": "0x7c, 0x04, 0x04, 0x04, 0x7c, 0x00,",
-        "р": "0x7c, 0x14, 0x14, 0x14, 0x08, 0x00,",
-        "с": "0x38, 0x44, 0x44, 0x44, 0x20, 0x00,",
-        "т": "0x04, 0x04, 0x7c, 0x04, 0x04, 0x00,",
-        "у": "0x4c, 0x50, 0x20, 0x10, 0x0c, 0x00,",
-        "ф": "0x18, 0x24, 0x7e, 0x24, 0x18, 0x00,",
-        "х": "0x44, 0x28, 0x10, 0x28, 0x44, 0x00,",
-        "ц": "0x3c, 0x20, 0x20, 0x3c, 0x60, 0x00,",
-        "ч": "0x0c, 0x10, 0x10, 0x10, 0x7c, 0x00,",
-        "ш": "0x3c, 0x20, 0x3c, 0x20, 0x3c, 0x00,",
-        "щ": "0x3c, 0x20, 0x3c, 0x20, 0x7c, 0x00,",
-        "ъ": "0x04, 0x7c, 0x50, 0x20, 0x00, 0x00,",
-        "ы": "0x7c, 0x50, 0x20, 0x00, 0x7c, 0x00,",
-        "ь": "0x00, 0x7c, 0x50, 0x20, 0x00, 0x00,",
-        "э": "0x28, 0x44, 0x54, 0x54, 0x28, 0x00,",
-        "ю": "0x7c, 0x10, 0x38, 0x44, 0x38, 0x00,",
-        "я": "0x48, 0x34, 0x14, 0x14, 0x7c, 0x00,",
-        "ѐ": "0x38, 0x55, 0x56, 0x54, 0x08, 0x00,",
-        "ё": "0x38, 0x55, 0x54, 0x55, 0x08, 0x00,",
-        "ђ": "0x02, 0x3f, 0x12, 0x48, 0x30, 0x00,",
-        "ѓ": "0x7c, 0x04, 0x06, 0x05, 0x04, 0x00,",
-        "є": "0x38, 0x54, 0x54, 0x44, 0x28, 0x00,",
-        "ѕ": "0x08, 0x54, 0x54, 0x54, 0x20, 0x00,",
-        "і": "0x00, 0x44, 0x7d, 0x40, 0x00, 0x00,",
-        "ї": "0x00, 0x45, 0x7c, 0x41, 0x00, 0x00,",
-        "ј": "0x20, 0x40, 0x44, 0x3d, 0x00, 0x00,",
-        "љ": "0x7c, 0x04, 0x7c, 0x50, 0x20, 0x00,",
-        "њ": "0x7c, 0x10, 0x7c, 0x50, 0x20, 0x00,",
-        "ћ": "0x04, 0x7e, 0x14, 0x10, 0x60, 0x00,",
-        "ќ": "0x7c, 0x12, 0x29, 0x44, 0x00, 0x00,",
-        "ѝ": "0x7c, 0x21, 0x12, 0x08, 0x7c, 0x00,",
-        "ў": "0x4c, 0x51, 0x22, 0x11, 0x0c, 0x00,",
-        "џ": "0x3c, 0x20, 0x60, 0x20, 0x3c, 0x00,",
-        "Ā": "0x78, 0x15, 0x15, 0x15, 0x78, 0x00,",
-        "ā": "0x20, 0x55, 0x55, 0x55, 0x78, 0x00,",
-        "Ă": "0x78, 0x15, 0x16, 0x15, 0x78, 0x00,",
-        "ă": "0x20, 0x55, 0x56, 0x55, 0x78, 0x00,",
-        "Ą": "0x7e, 0x09, 0x09, 0x49, 0xbe, 0x00,",
-        "ą": "0x20, 0x54, 0x54, 0xd4, 0x78, 0x00,",
-        "Ć": "0x38, 0x44, 0x46, 0x45, 0x28, 0x00,",
-        "ć": "0x38, 0x44, 0x46, 0x45, 0x20, 0x00,",
-        "Ĉ": "0x38, 0x46, 0x45, 0x46, 0x28, 0x00,",
-        "ĉ": "0x38, 0x46, 0x45, 0x46, 0x20, 0x00,",
-        "Ċ": "0x38, 0x44, 0x45, 0x44, 0x28, 0x00,",
-        "ċ": "0x38, 0x44, 0x45, 0x44, 0x20, 0x00,",
-        "Č": "0x38, 0x45, 0x46, 0x45, 0x28, 0x00,",
-        "č": "0x38, 0x45, 0x46, 0x45, 0x20, 0x00,",
-        "Ď": "0x7c, 0x45, 0x46, 0x29, 0x10, 0x00,",
-        "ď": "0x38, 0x44, 0x44, 0x4A, 0x7F, 0x00,",
-        "Đ": "0x08, 0x7f, 0x49, 0x22, 0x1c, 0x00,",
-        "đ": "0x38, 0x44, 0x44, 0x4A, 0x7F, 0x00,",
-        "Ē": "0x7c, 0x55, 0x55, 0x55, 0x44, 0x00,",
-        "ē": "0x38, 0x55, 0x55, 0x55, 0x08, 0x00,",
-        "Ĕ": "0x7c, 0x55, 0x56, 0x55, 0x44, 0x00,",
-        "ĕ": "0x38, 0x55, 0x56, 0x55, 0x08, 0x00,",
-        "Ė": "0x7c, 0x54, 0x55, 0x54, 0x44, 0x00,",
-        "ė": "0x38, 0x54, 0x55, 0x54, 0x08, 0x00,",
-        "Ę": "0x7f, 0x49, 0x49, 0xc9, 0x41, 0x00,",
-        "ę": "0x38, 0x54, 0x54, 0xd4, 0x18, 0x00,",
-        "Ě": "0x7c, 0x55, 0x56, 0x55, 0x44, 0x00,",
-        "ě": "0x38, 0x55, 0x56, 0x55, 0x08, 0x00,",
-        "Ĝ": "0x38, 0x46, 0x55, 0x56, 0x70, 0x00,",
-        "ĝ": "0x08, 0x56, 0x55, 0x56, 0x3c, 0x00,",
-        "Ğ": "0x38, 0x45, 0x56, 0x55, 0x30, 0x00,",
-        "ğ": "0x08, 0x55, 0x56, 0x55, 0x3c, 0x00,",
-        "Ġ": "0x38, 0x44, 0x55, 0x54, 0x30, 0x00,",
-        "ġ": "0x08, 0x54, 0x55, 0x54, 0x3c, 0x00,",
-        "Ģ": "0x0e, 0x51, 0x35, 0x15, 0x1c, 0x00,",
-        "Ĥ": "0x7c, 0x12, 0x11, 0x12, 0x7c, 0x00,",
-        "ĥ": "0x02, 0x79, 0x22, 0x10, 0x60, 0x00,",
-        "Ħ": "0x02, 0x7f, 0x0a, 0x7f, 0x02, 0x00,",
-        "ħ": "0x02, 0x7f, 0x12, 0x08, 0x70, 0x00,",
-        "Ĩ": "0x4a, 0x49, 0x7a, 0x49, 0x48, 0x00,",
-        "ĩ": "0x02, 0x49, 0x7a, 0x41, 0x00, 0x00,",
-        "Ī": "0x44, 0x45, 0x7d, 0x45, 0x44, 0x00,",
-        "ī": "0x00, 0x45, 0x7d, 0x41, 0x00, 0x00,",
-        "Ĭ": "0x44, 0x45, 0x7e, 0x45, 0x44, 0x00,",
-        "ĭ": "0x00, 0x45, 0x7e, 0x41, 0x00, 0x00,",
-        "Į": "0x00, 0x41, 0x7f, 0xc1, 0x00, 0x00,",
-        "į": "0x00, 0x44, 0x7d, 0xc0, 0x00, 0x00,",
-        "İ": "0x44, 0x44, 0x7d, 0x44, 0x44, 0x00,",
-        "ı": "0x00, 0x44, 0x7c, 0x40, 0x00, 0x00,",
-        "ij": "0x44, 0x7d, 0x40, 0x44, 0x3d, 0x00,",
-        "Ĵ": "0x20, 0x40, 0x46, 0x3d, 0x06, 0x00,",
-        "ĵ": "0x00, 0x20, 0x46, 0x3d, 0x02, 0x00,",
-        "Ķ": "0x1f, 0x44, 0x2a, 0x11, 0x00, 0x00,",
-        "ķ": "0x1f, 0x44, 0x2a, 0x11, 0x00, 0x00,",
-        "ĸ": "0x7c, 0x10, 0x28, 0x44, 0x00, 0x00,",
-        "Ĺ": "0x7c, 0x40, 0x42, 0x41, 0x40, 0x00,",
-        "Ľ": "0x7c, 0x40, 0x42, 0x41, 0x40, 0x00,",
-        "ĺ": "0x00, 0x44, 0x7e, 0x41, 0x00, 0x00,",
-        "Ļ": "0x1f, 0x50, 0x30, 0x10, 0x10, 0x00,",
-        "ļ": "0x00, 0x51, 0x3f, 0x10, 0x00, 0x00,",
-        "ľ": "0x00, 0x41, 0x7f, 0x40, 0x03, 0x00,",
-        "Ŀ": "0x7f, 0x40, 0x40, 0x48, 0x40, 0x00,",
-        "ŀ": "0x00, 0x41, 0x7f, 0x40, 0x08, 0x00,",
-        "Ł": "0x10, 0x7F, 0x48, 0x44, 0x40, 0x00,",
-        "ł": "0x00, 0x49, 0x7F, 0x44, 0x00, 0x00,",
-        "Ń": "0x7c, 0x08, 0x12, 0x21, 0x7c, 0x00,",
-        "ń": "0x7c, 0x08, 0x06, 0x05, 0x78, 0x00,",
-        "Ņ": "0x1f, 0x42, 0x24, 0x08, 0x1f, 0x00,",
-        "ņ": "0x1f, 0x42, 0x21, 0x01, 0x1e, 0x00,",
-        "Ň": "0x7c, 0x09, 0x12, 0x21, 0x7c, 0x00,",
-        "ň": "0x7c, 0x09, 0x06, 0x05, 0x78, 0x00,",
-        "Ō": "0x38, 0x45, 0x45, 0x45, 0x38, 0x00,",
-        "ō": "0x38, 0x45, 0x45, 0x45, 0x38, 0x00,",
-        "Ŏ": "0x38, 0x45, 0x46, 0x45, 0x38, 0x00,",
-        "ŏ": "0x38, 0x45, 0x46, 0x45, 0x38, 0x00,",
-        "Œ": "0x3e, 0x41, 0x7f, 0x49, 0x49, 0x00,",
-        "œ": "0x38, 0x44, 0x7c, 0x54, 0x58, 0x00,",
-        "Ŕ": "0x7c, 0x14, 0x16, 0x15, 0x68, 0x00,",
-        "ŕ": "0x7c, 0x08, 0x06, 0x05, 0x08, 0x00,",
-        "Ŗ": "0x1f, 0x45, 0x25, 0x05, 0x1a, 0x00,",
-        "ŗ": "0x1f, 0x42, 0x21, 0x01, 0x02, 0x00,",
-        "Ř": "0x7c, 0x15, 0x16, 0x15, 0x68, 0x00,",
-        "ř": "0x7c, 0x09, 0x06, 0x05, 0x08, 0x00,",
-        "Ś": "0x08, 0x54, 0x56, 0x55, 0x20, 0x00,",
-        "ś": "0x48, 0x54, 0x56, 0x55, 0x24, 0x00,",
-        "Ŝ": "0x08, 0x56, 0x55, 0x56, 0x20, 0x00,",
-        "ŝ": "0x48, 0x56, 0x55, 0x56, 0x24, 0x00,",
-        "Ş": "0x02, 0x55, 0x35, 0x15, 0x08, 0x00,",
-        "ş": "0x12, 0x55, 0x35, 0x15, 0x09, 0x00,",
-        "Š": "0x08, 0x55, 0x56, 0x55, 0x20, 0x00,",
-        "š": "0x48, 0x55, 0x56, 0x55, 0x24, 0x00,",
-        "Ţ": "0x01, 0x41, 0x3f, 0x01, 0x01, 0x00,",
-        "ţ": "0x02, 0x4f, 0x32, 0x10, 0x08, 0x00,",
-        "Ť": "0x04, 0x05, 0x7e, 0x05, 0x04, 0x00,",
-        "ť": "0x04, 0x3e, 0x44, 0x40, 0x23, 0x00,",
-        "Ŧ": "0x01, 0x09, 0x7f, 0x09, 0x01, 0x00,",
-        "ŧ": "0x14, 0x3e, 0x54, 0x40, 0x20, 0x00,",
-        "Ū": "0x3c, 0x41, 0x41, 0x41, 0x3c, 0x00,",
-        "ū": "0x3c, 0x41, 0x41, 0x21, 0x7c, 0x00,",
-        "Ŭ": "0x3c, 0x41, 0x42, 0x41, 0x3c, 0x00,",
-        "ŭ": "0x3c, 0x41, 0x41, 0x21, 0x7c, 0x00,",
-        "Ů": "0x3c, 0x40, 0x41, 0x40, 0x3c, 0x00,",
-        "ů": "0x3c, 0x41, 0x41, 0x21, 0x7c, 0x00,",
-        "Ŵ": "0x3c, 0x42, 0x39, 0x42, 0x3c, 0x00,",
-        "ŵ": "0x3c, 0x42, 0x31, 0x42, 0x3c, 0x00,",
-        "Ŷ": "0x04, 0x0a, 0x71, 0x0a, 0x04, 0x00,",
-        "ŷ": "0x04, 0x4a, 0x31, 0x12, 0x0c, 0x00,",
-        "Ÿ": "0x04, 0x09, 0x70, 0x09, 0x04, 0x00,",
-        "Ź": "0x44, 0x64, 0x56, 0x4d, 0x44, 0x00,",
-        "ź": "0x44, 0x64, 0x56, 0x4d, 0x44, 0x00,",
-        "Ż": "0x44, 0x64, 0x55, 0x4c, 0x44, 0x00,",
-        "ż": "0x44, 0x64, 0x55, 0x4c, 0x44, 0x00,",
-        "Ž": "0x44, 0x65, 0x56, 0x4d, 0x44, 0x00,",
-        "ž": "0x44, 0x65, 0x56, 0x4d, 0x44, 0x00,",
-        "ſ": "0x00, 0x04, 0x7e, 0x01, 0x01, 0x00,",
-    }
-    return font

Translations/font_tables.py

@@ -0,0 +1,874 @@
+from typing import Dict, Final, Tuple
+
+
+def get_font_map_ascii_basic() -> Dict[str, bytes]:
+    font = {
+        # U+0000..U+007F Basic Latin
+        " ": b"\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00",
+        "!": b"\x00\x00\x00\x00\x7C\xFF\xFF\x7C\x00\x00\x00\x00\x00\x00\x00\x00\x00\x33\x33\x00\x00\x00\x00\x00",
+        '"': b"\x00\x00\x00\x3C\x3C\x00\x00\x3C\x3C\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00",
+        "#": b"\x00\x00\x10\x90\xF0\x7E\x1E\x90\xF0\x7E\x1E\x10\x00\x02\x1E\x1F\x03\x02\x1E\x1F\x03\x02\x00\x00",
+        "$": b"\x00\x00\x78\xFC\xCC\xFF\xFF\xCC\xCC\x88\x00\x00\x00\x00\x04\x0C\x0C\x3F\x3F\x0C\x0F\x07\x00\x00",
+        "%": b"\x00\x00\x38\x38\x38\x00\x80\xC0\xE0\x70\x38\x1C\x00\x30\x38\x1C\x0E\x07\x03\x01\x38\x38\x38\x00",
+        "&": b"\x00\x00\x00\xB8\xFC\xC6\xE2\x3E\x1C\x00\x00\x00\x00\x00\x1F\x3F\x31\x21\x37\x1E\x1C\x36\x22\x00",
+        "'": b"\x00\x00\x00\x00\x27\x3F\x1F\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00",
+        "(": b"\x00\x00\x00\xF0\xFC\xFE\x07\x01\x01\x00\x00\x00\x00\x00\x00\x03\x0F\x1F\x38\x20\x20\x00\x00\x00",
+        ")": b"\x00\x00\x00\x01\x01\x07\xFE\xFC\xF0\x00\x00\x00\x00\x00\x00\x20\x20\x38\x1F\x0F\x03\x00\x00\x00",
+        "*": b"\x00\x00\x98\xB8\xE0\xF8\xF8\xE0\xB8\x98\x00\x00\x00\x00\x0C\x0E\x03\x0F\x0F\x03\x0E\x0C\x00\x00",
+        "+": b"\x00\x00\x80\x80\x80\xF0\xF0\x80\x80\x80\x00\x00\x00\x00\x01\x01\x01\x0F\x0F\x01\x01\x01\x00\x00",
+        ",": b"\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\xB8\xF8\x78\x00\x00\x00\x00\x00",
+        "-": b"\x00\x00\x80\x80\x80\x80\x80\x80\x80\x80\x00\x00\x00\x00\x01\x01\x01\x01\x01\x01\x01\x01\x00\x00",
+        ".": b"\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x38\x38\x38\x00\x00\x00\x00\x00",
+        "/": b"\x00\x00\x00\x00\x00\x80\xC0\xE0\x70\x38\x1C\x0E\x00\x18\x1C\x0E\x07\x03\x01\x00\x00\x00\x00\x00",
+        "0": b"\x00\xF8\xFE\x06\x03\x83\xC3\x63\x33\x1E\xFE\xF8\x00\x07\x1F\x1E\x33\x31\x30\x30\x30\x18\x1F\x07",
+        "1": b"\x00\x00\x00\x0C\x0C\x0E\xFF\xFF\x00\x00\x00\x00\x00\x00\x00\x30\x30\x30\x3F\x3F\x30\x30\x30\x00",
+        "2": b"\x00\x1C\x1E\x07\x03\x03\x83\xC3\xE3\x77\x3E\x1C\x00\x30\x38\x3C\x3E\x37\x33\x31\x30\x30\x30\x30",
+        "3": b"\x00\x0C\x0E\x07\xC3\xC3\xC3\xC3\xC3\xE7\x7E\x3C\x00\x0C\x1C\x38\x30\x30\x30\x30\x30\x39\x1F\x0E",
+        "4": b"\x00\xC0\xE0\x70\x38\x1C\x0E\x07\xFF\xFF\x00\x00\x00\x03\x03\x03\x03\x03\x03\x03\x3F\x3F\x03\x03",
+        "5": b"\x00\x3F\x7F\x63\x63\x63\x63\x63\x63\xE3\xC3\x83\x00\x0C\x1C\x38\x30\x30\x30\x30\x30\x38\x1F\x0F",
+        "6": b"\x00\xC0\xF0\xF8\xDC\xCE\xC7\xC3\xC3\xC3\x80\x00\x00\x0F\x1F\x39\x30\x30\x30\x30\x30\x39\x1F\x0F",
+        "7": b"\x00\x03\x03\x03\x03\x03\x03\xC3\xF3\x3F\x0F\x03\x00\x00\x00\x00\x30\x3C\x0F\x03\x00\x00\x00\x00",
+        "8": b"\x00\x00\xBC\xFE\xE7\xC3\xC3\xC3\xE7\xFE\xBC\x00\x00\x0F\x1F\x39\x30\x30\x30\x30\x30\x39\x1F\x0F",
+        "9": b"\x00\x3C\x7E\xE7\xC3\xC3\xC3\xC3\xC3\xE7\xFE\xFC\x00\x00\x00\x30\x30\x30\x38\x1C\x0E\x07\x03\x00",
+        ":": b"\x00\x00\x00\x00\x70\x70\x70\x00\x00\x00\x00\x00\x00\x00\x00\x00\x1C\x1C\x1C\x00\x00\x00\x00\x00",
+        ";": b"\x00\x00\x00\x00\x70\x70\x70\x00\x00\x00\x00\x00\x00\x00\x00\x00\x9C\xFC\x7C\x00\x00\x00\x00\x00",
+        "<": b"\x00\x00\xC0\xE0\xF0\x38\x1C\x0E\x07\x03\x00\x00\x00\x00\x00\x01\x03\x07\x0E\x1C\x38\x30\x00\x00",
+        "=": b"\x00\x00\x60\x60\x60\x60\x60\x60\x60\x60\x60\x00\x00\x00\x06\x06\x06\x06\x06\x06\x06\x06\x06\x00",
+        ">": b"\x00\x00\x03\x07\x0E\x1C\x38\xF0\xE0\xC0\x00\x00\x00\x00\x30\x38\x1C\x0E\x07\x03\x01\x00\x00\x00",
+        "?": b"\x00\x1C\x1E\x07\x03\x83\xC3\xE3\x77\x3E\x1C\x00\x00\x00\x00\x00\x00\x37\x37\x00\x00\x00\x00\x00",
+        "@": b"\x00\xF8\xFE\x07\xF3\xFB\x1B\xFB\xFB\x07\xFE\xF8\x00\x0F\x1F\x18\x33\x37\x36\x37\x37\x36\x03\x01",
+        "A": b"\x00\x00\x00\xE0\xFC\x1F\x1F\xFC\xE0\x00\x00\x00\x00\x38\x3F\x07\x06\x06\x06\x06\x07\x3F\x38\x00",
+        "B": b"\x00\xFF\xFF\xC3\xC3\xC3\xC3\xE7\xFE\xBC\x00\x00\x00\x3F\x3F\x30\x30\x30\x30\x30\x39\x1F\x0F\x00",
+        "C": b"\x00\xF0\xFC\x0E\x07\x03\x03\x03\x07\x0E\x0C\x00\x00\x03\x0F\x1C\x38\x30\x30\x30\x38\x1C\x0C\x00",
+        "D": b"\x00\xFF\xFF\x03\x03\x03\x03\x07\x0E\xFC\xF0\x00\x00\x3F\x3F\x30\x30\x30\x30\x38\x1C\x0F\x03\x00",
+        "E": b"\x00\xFF\xFF\xC3\xC3\xC3\xC3\xC3\xC3\x03\x03\x00\x00\x3F\x3F\x30\x30\x30\x30\x30\x30\x30\x30\x00",
+        "F": b"\x00\xFF\xFF\xC3\xC3\xC3\xC3\xC3\xC3\x03\x03\x00\x00\x3F\x3F\x00\x00\x00\x00\x00\x00\x00\x00\x00",
+        "G": b"\x00\xF0\xFC\x0E\x07\x03\xC3\xC3\xC3\xC7\xC6\x00\x00\x03\x0F\x1C\x38\x30\x30\x30\x30\x3F\x3F\x00",
+        "H": b"\x00\xFF\xFF\xC0\xC0\xC0\xC0\xC0\xC0\xFF\xFF\x00\x00\x3F\x3F\x00\x00\x00\x00\x00\x00\x3F\x3F\x00",
+        "I": b"\x00\x00\x00\x03\x03\xFF\xFF\x03\x03\x00\x00\x00\x00\x00\x00\x30\x30\x3F\x3F\x30\x30\x00\x00\x00",
+        "J": b"\x00\x00\x00\x00\x00\x00\x00\x00\x00\xFF\xFF\x00\x00\x0E\x1E\x38\x30\x30\x30\x30\x38\x1F\x07\x00",
+        "K": b"\x00\xFF\xFF\xC0\xE0\xF0\x38\x1C\x0E\x07\x03\x00\x00\x3F\x3F\x00\x01\x03\x07\x0E\x1C\x38\x30\x00",
+        "L": b"\x00\xFF\xFF\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x3F\x3F\x30\x30\x30\x30\x30\x30\x30\x30\x00",
+        "M": b"\x00\xFF\xFF\x1E\x78\xE0\xE0\x78\x1E\xFF\xFF\x00\x00\x3F\x3F\x00\x00\x01\x01\x00\x00\x3F\x3F\x00",
+        "N": b"\x00\xFF\xFF\x0E\x38\xF0\xC0\x00\x00\xFF\xFF\x00\x00\x3F\x3F\x00\x00\x00\x03\x07\x1C\x3F\x3F\x00",
+        "O": b"\x00\xF0\xFC\x0E\x07\x03\x03\x07\x0E\xFC\xF0\x00\x00\x03\x0F\x1C\x38\x30\x30\x38\x1C\x0F\x03\x00",
+        "P": b"\x00\xFF\xFF\x83\x83\x83\x83\x83\xC7\xFE\x7C\x00\x00\x3F\x3F\x01\x01\x01\x01\x01\x01\x00\x00\x00",
+        "Q": b"\x00\xF0\xFC\x0E\x07\x03\x03\x07\x0E\xFC\xF0\x00\x00\x03\x0F\x1C\x38\x30\x36\x3E\x1C\x3F\x33\x00",
+        "R": b"\x00\xFF\xFF\x83\x83\x83\x83\x83\xC7\xFE\x7C\x00\x00\x3F\x3F\x01\x01\x03\x07\x0F\x1D\x38\x30\x00",
+        "S": b"\x00\x3C\x7E\xE7\xC3\xC3\xC3\xC3\xC7\x8E\x0C\x00\x00\x0C\x1C\x38\x30\x30\x30\x30\x39\x1F\x0F\x00",
+        "T": b"\x00\x00\x03\x03\x03\xFF\xFF\x03\x03\x03\x00\x00\x00\x00\x00\x00\x00\x3F\x3F\x00\x00\x00\x00\x00",
+        "U": b"\x00\xFF\xFF\x00\x00\x00\x00\x00\x00\xFF\xFF\x00\x00\x07\x1F\x38\x30\x30\x30\x30\x38\x1F\x07\x00",
+        "V": b"\x00\x07\x3F\xF8\xC0\x00\x00\xC0\xF8\x3F\x07\x00\x00\x00\x00\x01\x0F\x3E\x3E\x0F\x01\x00\x00\x00",
+        "W": b"\x00\xFF\xFF\x00\x00\x80\x80\x00\x00\xFF\xFF\x00\x00\x3F\x3F\x1C\x06\x03\x03\x06\x1C\x3F\x3F\x00",
+        "X": b"\x00\x03\x0F\x1C\x30\xE0\xE0\x30\x1C\x0F\x03\x00\x00\x30\x3C\x0E\x03\x01\x01\x03\x0E\x3C\x30\x00",
+        "Y": b"\x00\x03\x0F\x3C\xF0\xC0\xC0\xF0\x3C\x0F\x03\x00\x00\x00\x00\x00\x00\x3F\x3F\x00\x00\x00\x00\x00",
+        "Z": b"\x00\x03\x03\x03\x03\xC3\xE3\x33\x1F\x0F\x03\x00\x00\x30\x3C\x3E\x33\x31\x30\x30\x30\x30\x30\x00",
+        "[": b"\x00\x00\x00\xFF\xFF\x03\x03\x03\x03\x00\x00\x00\x00\x00\x00\x3F\x3F\x30\x30\x30\x30\x00\x00\x00",
+        "\\": b"\x00\x0E\x1C\x38\x70\xE0\xC0\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x01\x03\x07\x0E\x1C\x18",
+        "]": b"\x00\x00\x00\x03\x03\x03\x03\xFF\xFF\x00\x00\x00\x00\x00\x00\x30\x30\x30\x30\x3F\x3F\x00\x00\x00",
+        "^": b"\x00\x60\x70\x38\x1C\x0E\x07\x0E\x1C\x38\x70\x60\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00",
+        "_": b"\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\xC0\xC0\xC0\xC0\xC0\xC0\xC0\xC0\xC0\xC0\xC0",
+        "`": b"\x00\x00\x00\x00\x00\x3E\x7E\x4E\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00",
+        "a": b"\x00\x00\x40\x60\x60\x60\x60\x60\x60\xE0\xC0\x00\x00\x1C\x3E\x33\x33\x33\x33\x33\x33\x3F\x3F\x00",
+        "b": b"\x00\xFF\xFF\xC0\x60\x60\x60\x60\xE0\xC0\x80\x00\x00\x3F\x3F\x30\x30\x30\x30\x30\x38\x1F\x0F\x00",
+        "c": b"\x00\x80\xC0\xE0\x60\x60\x60\x60\x60\xC0\x80\x00\x00\x0F\x1F\x38\x30\x30\x30\x30\x30\x18\x08\x00",
+        "d": b"\x00\x80\xC0\xE0\x60\x60\x60\xE0\xC0\xFF\xFF\x00\x00\x0F\x1F\x38\x30\x30\x30\x30\x30\x3F\x3F\x00",
+        "e": b"\x00\x80\xC0\xE0\x60\x60\x60\x60\x60\xC0\x80\x00\x00\x0F\x1F\x3B\x33\x33\x33\x33\x33\x13\x01\x00",
+        "f": b"\x00\xC0\xC0\xFC\xFE\xC7\xC3\xC3\x03\x00\x00\x00\x00\x00\x00\x3F\x3F\x00\x00\x00\x00\x00\x00\x00",
+        "g": b"\x00\x80\xC0\xE0\x60\x60\x60\x60\x60\xE0\xE0\x00\x00\x03\xC7\xCE\xCC\xCC\xCC\xCC\xE6\x7F\x3F\x00",
+        "h": b"\x00\xFF\xFF\xC0\x60\x60\x60\xE0\xC0\x80\x00\x00\x00\x3F\x3F\x00\x00\x00\x00\x00\x3F\x3F\x00\x00",
+        "i": b"\x00\x00\x00\x00\x60\xEC\xEC\x00\x00\x00\x00\x00\x00\x00\x00\x30\x30\x3F\x3F\x30\x30\x00\x00\x00",
+        "j": b"\x00\x00\x00\x00\x00\x00\x60\xEC\xEC\x00\x00\x00\x00\x00\x00\x60\xE0\xC0\xC0\xFF\x7F\x00\x00\x00",
+        "k": b"\x00\x00\xFF\xFF\x00\x80\xC0\xE0\x60\x00\x00\x00\x00\x00\x3F\x3F\x03\x07\x0F\x1C\x38\x30\x00\x00",
+        "l": b"\x00\x00\x00\x00\x03\xFF\xFF\x00\x00\x00\x00\x00\x00\x00\x00\x30\x30\x3F\x3F\x30\x30\x00\x00\x00",
+        "m": b"\x00\xE0\xC0\xE0\xE0\xC0\xC0\xE0\xE0\xC0\x80\x00\x00\x3F\x3F\x00\x00\x3F\x3F\x00\x00\x3F\x3F\x00",
+        "n": b"\x00\x00\xE0\xE0\x60\x60\x60\x60\xE0\xC0\x80\x00\x00\x00\x3F\x3F\x00\x00\x00\x00\x00\x3F\x3F\x00",
+        "o": b"\x00\x80\xC0\xE0\x60\x60\x60\x60\xE0\xC0\x80\x00\x00\x0F\x1F\x38\x30\x30\x30\x30\x38\x1F\x0F\x00",
+        "p": b"\x00\xE0\xE0\x60\x60\x60\x60\x60\xE0\xC0\x80\x00\x00\xFF\xFF\x0C\x18\x18\x18\x18\x1C\x0F\x07\x00",
+        "q": b"\x00\x80\xC0\xE0\x60\x60\x60\x60\x60\xE0\xE0\x00\x00\x07\x0F\x1C\x18\x18\x18\x18\x0C\xFF\xFF\x00",
+        "r": b"\x00\x00\xE0\xE0\xC0\x60\x60\x60\x60\xE0\xC0\x00\x00\x00\x3F\x3F\x00\x00\x00\x00\x00\x00\x00\x00",
+        "s": b"\x00\xC0\xE0\x60\x60\x60\x60\x60\x40\x00\x00\x00\x00\x11\x33\x33\x33\x33\x33\x3F\x1E\x00\x00\x00",
+        "t": b"\x00\x60\x60\xFE\xFE\x60\x60\x60\x00\x00\x00\x00\x00\x00\x00\x1F\x3F\x30\x30\x30\x30\x00\x00\x00",
+        "u": b"\x00\xE0\xE0\x00\x00\x00\x00\x00\x00\xE0\xE0\x00\x00\x0F\x1F\x38\x30\x30\x30\x30\x18\x3F\x3F\x00",
+        "v": b"\x00\x60\xE0\x80\x00\x00\x00\x00\x80\xE0\x60\x00\x00\x00\x01\x07\x1E\x38\x38\x1E\x07\x01\x00\x00",
+        "w": b"\x00\xE0\xE0\x00\x00\xE0\xE0\x00\x00\xE0\xE0\x00\x00\x07\x1F\x38\x1C\x0F\x0F\x1C\x38\x1F\x07\x00",
+        "x": b"\x00\x60\xE0\xC0\x80\x00\x80\xC0\xE0\x60\x00\x00\x00\x30\x38\x1D\x0F\x07\x0F\x1D\x38\x30\x00\x00",
+        "y": b"\x00\x00\x60\xE0\x80\x00\x00\x80\xE0\x60\x00\x00\x00\x00\x00\x81\xE7\x7E\x1E\x07\x01\x00\x00\x00",
+        "z": b"\x00\x60\x60\x60\x60\x60\xE0\xE0\x60\x20\x00\x00\x00\x30\x38\x3C\x36\x33\x31\x30\x30\x30\x00\x00",
+        "{": b"\x00\x00\x80\xC0\xFC\x7E\x07\x03\x03\x03\x00\x00\x00\x00\x00\x01\x1F\x3F\x70\x60\x60\x60\x00\x00",
+        "|": b"\x00\x00\x00\x00\x00\xFF\xFF\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x3F\x3F\x00\x00\x00\x00\x00",
+        "}": b"\x00\x00\x03\x03\x03\x07\x7E\xFC\xC0\x80\x00\x00\x00\x00\x60\x60\x60\x70\x3F\x1F\x01\x00\x00\x00",
+        "~": b"\x00\x10\x18\x0C\x04\x0C\x18\x10\x18\x0C\x04\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00",
+    }
+    return font
+
+
+def get_font_map_latin_extended() -> Dict[str, bytes]:
+    font = {
+        # U+0080..U+00FF Latin-1 Supplement
+        "¡": b"\x00\x00\x00\x00\x80\xF3\xF3\x80\x00\x00\x00\x00\x00\x00\x00\x00\x0F\x3F\x3F\x0F\x00\x00\x00\x00",
+        "¢": b"\x00\x00\xE0\xF0\x38\xFE\xFE\x18\x38\x30\x00\x00\x00\x00\x03\x07\x0E\x3F\x3F\x0C\x0E\x06\x00\x00",
+        "£": b"\x00\x00\x00\x80\xF8\xFC\x8C\x8C\x1C\x18\x00\x00\x00\x00\x18\x1C\x1F\x0B\x18\x18\x18\x18\x08\x00",
+        "¤": b"\x00\xF6\xFE\x18\x0C\x0C\x0C\x0C\x18\xFE\xF6\x00\x00\x1B\x1F\x06\x0C\x0C\x0C\x0C\x06\x1F\x1B\x00",
+        "¥": b"\x00\x03\x0F\x3C\xF0\xC0\xC0\xF0\x3C\x0F\x03\x00\x00\x00\x0A\x0A\x0A\x3F\x3F\x0A\x0A\x0A\x00\x00",
+        "¦": b"\x00\x00\x00\x00\x00\x1F\x1F\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x3F\x3F\x00\x00\x00\x00\x00",
+        "§": b"\x00\x00\xDC\xFE\x22\x22\x22\x22\xE6\xC4\x00\x00\x00\x00\x08\x19\x11\x11\x11\x11\x1F\x0E\x00\x00",
+        "¨": b"\x00\x00\x00\x03\x03\x00\x00\x03\x03\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00",
+        "©": b"\x00\xF0\xF8\x1C\xCC\xEC\x2C\x6C\x4C\x1C\xF8\xF0\x00\x07\x0F\x1C\x19\x1B\x1A\x1B\x19\x1C\x0F\x07",
+        "«": b"\x00\x80\xC0\x60\x20\x00\x80\xC0\x60\x20\x00\x00\x00\x00\x01\x03\x02\x00\x00\x01\x03\x02\x00\x00",
+        "¬": b"\x18\x18\x18\x18\x18\x18\x18\x18\x18\xF8\xF8\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x03\x03\x00",
+        "®": b"\x00\xF0\xF8\x1C\xEC\xEC\xAC\xEC\x4C\x1C\xF8\xF0\x00\x07\x0F\x1C\x1B\x1B\x18\x1B\x1B\x1C\x0F\x07",
+        "¯": b"\x00\x00\x00\x00\x00\x0C\x0C\x0C\x0C\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00",
+        "°": b"\x00\x00\x00\x1E\x3F\x33\x33\x3F\x1E\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00",
+        "±": b"\x00\x00\x00\xC0\xC0\xF0\xF0\xC0\xC0\x00\x00\x00\x00\x00\x00\x18\x18\x1B\x1B\x18\x18\x00\x00\x00",
+        "²": b"\x00\x00\x19\x1D\x15\x17\x12\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00",
+        "³": b"\x00\x00\x11\x15\x15\x1F\x0A\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00",
+        "´": b"\x00\x00\x00\x00\x04\x06\x03\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00",
+        "µ": b"\x00\xF0\xF0\x00\x00\x00\x00\x00\xF0\xF0\x00\x00\x00\xFF\xFF\x0E\x0C\x0C\x0C\x06\x0F\x0F\x00\x00",
+        "¶": b"\x00\x38\x7C\xC6\x82\xFE\xFE\x02\xFE\xFE\x02\x00\x00\x00\x00\x00\x00\x3F\x3F\x00\x3F\x3F\x00\x00",
+        "¹": b"\x00\x00\x12\x1F\x1F\x10\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00",
+        "»": b"\x00\x20\x60\xC0\x80\x00\x20\x60\xC0\x80\x00\x00\x00\x02\x03\x01\x00\x00\x02\x03\x01\x00\x00\x00",
+        "¼": b"\x00\x48\x7C\x7C\x40\x80\xC0\x60\x30\x10\x00\x00\x00\x00\x04\x06\x03\x01\x06\x07\x04\x1F\x1F\x00",
+        "½": b"\x00\x48\x7C\x7C\x40\x80\xC0\x60\x30\x10\x00\x00\x00\x00\x04\x06\x03\x01\x00\x19\x1D\x17\x12\x00",
+        "¾": b"\x00\x44\x54\x7C\x28\x80\xC0\x60\x30\x10\x00\x00\x00\x00\x04\x06\x03\x01\x06\x07\x04\x1F\x1F\x00",
+        "¿": b"\x00\x00\x00\x80\xC0\xFB\x7B\x00\x00\x00\x00\x00\x00\x0E\x1F\x3B\x31\x30\x30\x30\x38\x1E\x0E\x00",
+        "À": b"\x00\x00\x00\x80\xE1\x7B\x7E\xE4\x80\x00\x00\x00\x00\x38\x3E\x0F\x0D\x0C\x0C\x0D\x0F\x3E\x38\x00",
+        "Á": b"\x00\x00\x00\x80\xE4\x7E\x7B\xE1\x80\x00\x00\x00\x00\x38\x3E\x0F\x0D\x0C\x0C\x0D\x0F\x3E\x38\x00",
+        "Â": b"\x00\x00\x00\x84\xE6\x7B\x7B\xE6\x84\x00\x00\x00\x00\x38\x3E\x0F\x0D\x0C\x0C\x0D\x0F\x3E\x38\x00",
+        "Ã": b"\x00\x00\x00\x82\xE3\x79\x7B\xE2\x83\x01\x00\x00\x00\x38\x3E\x0F\x0D\x0C\x0C\x0D\x0F\x3E\x38\x00",
+        "Ä": b"\x00\x00\x00\x83\xE3\x78\x78\xE3\x83\x00\x00\x00\x00\x38\x3E\x0F\x0D\x0C\x0C\x0D\x0F\x3E\x38\x00",
+        "Å": b"\x00\x00\x00\x80\xE2\x75\x75\xE2\x80\x00\x00\x00\x00\x38\x3E\x0F\x0D\x0C\x0C\x0D\x0F\x3E\x38\x00",
+        "Æ": b"\x00\x00\x80\xF0\x7C\x1F\xFF\xFF\xC3\xC3\x03\x00\x00\x3C\x3F\x07\x06\x06\x3F\x3F\x30\x30\x30\x00",
+        "Ç": b"\x00\xF0\xFC\x0E\x07\x03\x03\x03\x07\x1E\x1C\x00\x00\x01\x07\xCE\xDC\xF8\xF8\x18\x1C\x0E\x06\x00",
+        "È": b"\x00\xF8\xF8\x99\x9B\x9E\x9C\x98\x98\x18\x18\x00\x00\x3F\x3F\x31\x31\x31\x31\x31\x31\x30\x30\x00",
+        "É": b"\x00\xF8\xF8\x98\x98\x9C\x9E\x9B\x99\x18\x18\x00\x00\x3F\x3F\x31\x31\x31\x31\x31\x31\x30\x30\x00",
+        "Ê": b"\x00\xF8\xF8\x9C\x9E\x9B\x9B\x9E\x9C\x18\x18\x00\x00\x3F\x3F\x31\x31\x31\x31\x31\x31\x30\x30\x00",
+        "Ë": b"\x00\xF8\xF8\x9B\x9B\x98\x98\x9B\x9B\x18\x18\x00\x00\x3F\x3F\x31\x31\x31\x31\x31\x31\x30\x30\x00",
+        "Ì": b"\x00\x00\x00\x19\x1B\xFE\xFC\x18\x18\x00\x00\x00\x00\x00\x00\x30\x30\x3F\x3F\x30\x30\x00\x00\x00",
+        "Í": b"\x00\x00\x00\x18\x18\xFC\xFE\x1B\x19\x00\x00\x00\x00\x00\x00\x30\x30\x3F\x3F\x30\x30\x00\x00\x00",
+        "Î": b"\x00\x00\x00\x1C\x1E\xFB\xFB\x1E\x1C\x00\x00\x00\x00\x00\x00\x30\x30\x3F\x3F\x30\x30\x00\x00\x00",
+        "Ï": b"\x00\x00\x00\x1B\x1B\xF8\xF8\x1B\x1B\x00\x00\x00\x00\x00\x00\x30\x30\x3F\x3F\x30\x30\x00\x00\x00",
+        "Ð": b"\x00\xC0\xFF\xFF\xC3\x03\x03\x07\x0E\xFC\xF0\x00\x00\x00\x3F\x3F\x30\x30\x30\x38\x1C\x0F\x03\x00",
+        "Ñ": b"\x00\xF8\xF8\x72\xE3\xC1\x83\x02\x03\xF9\xF8\x00\x00\x3F\x3F\x00\x00\x01\x03\x07\x0E\x3F\x3F\x00",
+        "Ò": b"\x00\xE0\xF0\x39\x1B\x1E\x1C\x18\x38\xF0\xE0\x00\x00\x0F\x1F\x38\x30\x30\x30\x30\x38\x1F\x0F\x00",
+        "Ó": b"\x00\xE0\xF0\x38\x18\x1C\x1E\x1B\x39\xF0\xE0\x00\x00\x0F\x1F\x38\x30\x30\x30\x30\x38\x1F\x0F\x00",
+        "Ô": b"\x00\xE0\xF0\x3C\x1E\x1B\x1B\x1E\x3C\xF0\xE0\x00\x00\x0F\x1F\x38\x30\x30\x30\x30\x38\x1F\x0F\x00",
+        "Õ": b"\x00\xE0\xF0\x3A\x1B\x19\x1B\x1A\x3B\xF1\xE0\x00\x00\x0F\x1F\x38\x30\x30\x30\x30\x38\x1F\x0F\x00",
+        "Ö": b"\x00\xE0\xF0\x3B\x1B\x18\x18\x1B\x3B\xF0\xE0\x00\x00\x0F\x1F\x38\x30\x30\x30\x30\x38\x1F\x0F\x00",
+        "×": b"\x00\xF0\xF8\x1C\x0C\x8C\xEC\x7C\x18\xFC\xF4\x00\x00\x2F\x3F\x18\x3E\x37\x31\x30\x38\x1F\x0F\x00",
+        "Ù": b"\x00\xF8\xF8\x01\x03\x06\x04\x00\x00\xF8\xF8\x00\x00\x07\x1F\x38\x30\x30\x30\x30\x38\x1F\x07\x00",
+        "Ú": b"\x00\xF8\xF8\x00\x00\x04\x06\x03\x01\xF8\xF8\x00\x00\x07\x1F\x38\x30\x30\x30\x30\x38\x1F\x07\x00",
+        "Û": b"\x00\xF8\xF8\x04\x06\x03\x03\x06\x04\xF8\xF8\x00\x00\x07\x1F\x38\x30\x30\x30\x30\x38\x1F\x07\x00",
+        "Ü": b"\x00\xF8\xF8\x03\x03\x00\x00\x03\x03\xF8\xF8\x00\x00\x07\x1F\x38\x30\x30\x30\x30\x38\x1F\x07\x00",
+        "Ý": b"\x00\x08\x18\x30\x60\xC4\xC6\x63\x31\x18\x08\x00\x00\x00\x00\x00\x00\x3F\x3F\x00\x00\x00\x00\x00",
+        "ß": b"\x00\x00\xC0\xE0\x30\x10\x10\x30\xE0\xC0\x00\x00\x00\x00\xFF\xFF\x21\x21\x21\x33\x3F\x1E\x00\x00",
+        "à": b"\x00\x00\x40\x60\x62\x66\x6C\x68\x60\xE0\xC0\x00\x00\x1C\x3E\x33\x33\x33\x33\x33\x33\x3F\x3F\x00",
+        "á": b"\x00\x00\x40\x60\x68\x6C\x66\x62\x60\xE0\xC0\x00\x00\x1C\x3E\x33\x33\x33\x33\x33\x33\x3F\x3F\x00",
+        "â": b"\x00\x00\x40\x68\x6C\x66\x66\x6C\x68\xE0\xC0\x00\x00\x1C\x3E\x33\x33\x33\x33\x33\x33\x3F\x3F\x00",
+        "ã": b"\x00\x00\x40\x68\x6C\x64\x6C\x68\x6C\xE4\xC0\x00\x00\x1C\x3E\x33\x33\x33\x33\x33\x33\x3F\x3F\x00",
+        "ä": b"\x00\x00\x40\x6C\x6C\x60\x60\x6C\x6C\xE0\xC0\x00\x00\x1C\x3E\x33\x33\x33\x33\x33\x33\x3F\x3F\x00",
+        "å": b"\x00\x00\x40\x60\x64\x6A\x6A\x64\x60\xE0\xC0\x00\x00\x1C\x3E\x33\x33\x33\x33\x33\x33\x3F\x3F\x00",
+        "æ": b"\x00\x80\xC0\x40\x40\xC0\x80\x40\x40\xC0\x80\x00\x00\x1C\x3E\x22\x22\x1F\x3F\x22\x22\x33\x11\x00",
+        "ç": b"\x00\x80\xC0\xE0\x60\x60\x60\x60\xE0\xC0\x80\x00\x00\x0F\x1F\xB8\xB0\xF0\xF0\x30\x38\x18\x08\x00",
+        "è": b"\x00\x80\xC0\xE0\x62\x66\x6C\x68\x60\xC0\x80\x00\x00\x0F\x1F\x33\x33\x33\x33\x33\x33\x13\x03\x00",
+        "é": b"\x00\x80\xC0\xE0\x60\x68\x6C\x66\x62\xC0\x80\x00\x00\x0F\x1F\x3B\x33\x33\x33\x33\x33\x13\x03\x00",
+        "ê": b"\x00\x80\xC0\xE8\x6C\x66\x66\x6C\x68\xC0\x80\x00\x00\x0F\x1F\x33\x33\x33\x33\x33\x33\x13\x03\x00",
+        "ë": b"\x00\x80\xC0\xEC\x6C\x60\x60\x6C\x6C\xC0\x80\x00\x00\x0F\x1F\x33\x33\x33\x33\x33\x33\x13\x03\x00",
+        "ì": b"\x00\x00\x00\x00\x62\xE6\xEC\x08\x00\x00\x00\x00\x00\x00\x00\x30\x30\x3F\x3F\x30\x30\x00\x00\x00",
+        "í": b"\x00\x00\x00\x00\x68\xEC\xE6\x02\x00\x00\x00\x00\x00\x00\x00\x30\x30\x3F\x3F\x30\x30\x00\x00\x00",
+        "î": b"\x00\x00\x00\x08\x6C\xE6\xE6\x0C\x08\x00\x00\x00\x00\x00\x00\x30\x30\x3F\x3F\x30\x30\x00\x00\x00",
+        "ï": b"\x00\x00\x00\x0C\x6C\xE0\xEC\x0C\x00\x00\x00\x00\x00\x00\x00\x30\x30\x3F\x3F\x30\x30\x00\x00\x00",
+        "ñ": b"\x00\x00\xE0\xE8\x6C\x64\x6C\x68\xEC\xC4\x80\x00\x00\x00\x3F\x3F\x00\x00\x00\x00\x00\x3F\x3F\x00",
+        "ò": b"\x00\x80\xC0\xE0\x62\x66\x6C\x68\xE0\xC0\x80\x00\x00\x0F\x1F\x38\x30\x30\x30\x30\x38\x1F\x0F\x00",
+        "ó": b"\x00\x80\xC0\xE0\x68\x6C\x66\x62\xE0\xC0\x80\x00\x00\x0F\x1F\x38\x30\x30\x30\x30\x38\x1F\x0F\x00",
+        "ô": b"\x00\x80\xC0\xE8\x6C\x66\x66\x6C\xE8\xC0\x80\x00\x00\x0F\x1F\x38\x30\x30\x30\x30\x38\x1F\x0F\x00",
+        "õ": b"\x00\x80\xC8\xEC\x64\x6C\x68\x6C\xE4\xC0\x80\x00\x00\x0F\x1F\x38\x30\x30\x30\x30\x38\x1F\x0F\x00",
+        "ö": b"\x00\x80\xC0\xEC\x6C\x60\x60\x6C\xEC\xC0\x80\x00\x00\x0F\x1F\x38\x30\x30\x30\x30\x38\x1F\x0F\x00",
+        "÷": b"\x00\x00\x80\x80\x80\xB0\xB0\x80\x80\x80\x00\x00\x00\x00\x01\x01\x01\x0D\x0D\x01\x01\x01\x00\x00",
+        "ø": b"\x00\x80\xC0\xE0\x60\x60\x60\xE0\xC0\xE0\xA0\x00\x00\x2F\x3F\x18\x3C\x36\x33\x31\x38\x1F\x0F\x00",
+        "ù": b"\x00\xE0\xE0\x00\x02\x06\x0C\x08\x00\xE0\xE0\x00\x00\x0F\x1F\x38\x30\x30\x30\x30\x18\x3F\x3F\x00",
+        "ú": b"\x00\xE0\xE0\x00\x08\x0C\x06\x02\x00\xE0\xE0\x00\x00\x0F\x1F\x38\x30\x30\x30\x30\x18\x3F\x3F\x00",
+        "û": b"\x00\xE0\xE0\x08\x0C\x06\x06\x0C\x08\xE0\xE0\x00\x00\x0F\x1F\x38\x30\x30\x30\x30\x18\x3F\x3F\x00",
+        "ü": b"\x00\xE0\xE0\x0C\x0C\x00\x00\x0C\x0C\xE0\xE0\x00\x00\x0F\x1F\x38\x30\x30\x30\x30\x18\x3F\x3F\x00",
+        "ý": b"\x00\x00\x60\xE0\x80\x10\x18\x8C\xE4\x60\x00\x00\x00\x00\x00\x81\xE7\x7E\x1E\x07\x01\x00\x00\x00",
+        "þ": b"\x00\x00\x03\xFF\xFF\x1B\x18\x18\xF8\xF0\x00\x00\x00\x00\x30\x3F\x3F\x36\x06\x06\x07\x03\x00\x00",
+        "ÿ": b"\x00\x00\x60\xEC\x8C\x00\x00\x8C\xEC\x60\x00\x00\x00\x00\x00\x81\xE7\x7E\x1E\x07\x01\x00\x00\x00",
+        # U+0100..U+017F Latin Extended A
+        "Ā": b"\x00\x00\x00\xE0\xF9\x1D\x1D\xF9\xE0\x00\x00\x00\x00\x38\x3F\x07\x06\x06\x06\x06\x07\x3F\x38\x00",
+        "ā": b"\x00\x00\x40\x60\x68\x68\x68\x68\x68\xE0\xC0\x00\x00\x1C\x3E\x33\x33\x33\x33\x33\x33\x3F\x3F\x00",
+        "Ă": b"\x00\x00\x00\xE0\xF9\x1A\x1A\xF9\xE0\x00\x00\x00\x00\x38\x3F\x07\x06\x06\x06\x06\x07\x3F\x38\x00",
+        "ă": b"\x00\x00\x40\x60\x64\x68\x68\x68\x64\xE0\xC0\x00\x00\x1C\x3E\x33\x33\x33\x33\x33\x33\x3F\x3F\x00",
+        "Ą": b"\x00\x00\x00\xE0\xFC\x1F\x1F\xFC\xE0\x00\x00\x00\x00\x38\x3F\x07\x06\x06\x06\x06\x67\xBF\xB8\x00",
+        "ą": b"\x00\x00\x40\x60\x60\x60\x60\x60\x60\xE0\xC0\x00\x00\x1C\x3E\x33\x33\x33\x33\x33\x73\xBF\xBF\x00",
+        "Ć": b"\x00\x80\xE0\x70\x38\x18\x1A\x1B\x39\x70\x60\x00\x00\x03\x0F\x1C\x38\x30\x30\x30\x38\x1C\x0C\x00",
+        "ć": b"\x00\x80\xC0\xE0\x60\x60\x68\x6C\x64\xC0\x80\x00\x00\x0F\x1F\x38\x30\x30\x30\x30\x30\x18\x08\x00",
+        "Ĉ": b"\x00\x80\xE0\x70\x3A\x1B\x19\x1B\x3A\x70\x60\x00\x00\x03\x0F\x1C\x38\x30\x30\x30\x38\x1C\x0C\x00",
+        "ĉ": b"\x00\x80\xC0\xE0\x68\x6C\x64\x6C\x68\xC0\x80\x00\x00\x0F\x1F\x38\x30\x30\x30\x30\x30\x18\x08\x00",
+        "Ċ": b"\x00\x80\xE0\x70\x38\x18\x1A\x18\x38\x70\x60\x00\x00\x03\x0F\x1C\x38\x30\x30\x30\x38\x1C\x0C\x00",
+        "ċ": b"\x00\x80\xC0\xE0\x60\x60\x68\x60\x60\xC0\x80\x00\x00\x0F\x1F\x38\x30\x30\x30\x30\x30\x18\x08\x00",
+        "Č": b"\x00\x80\xE0\x70\x39\x1B\x1A\x1B\x39\x70\x60\x00\x00\x03\x0F\x1C\x38\x30\x30\x30\x38\x1C\x0C\x00",
+        "č": b"\x00\x80\xC0\xE0\x64\x6C\x68\x6C\x64\xC0\x80\x00\x00\x0F\x1F\x38\x30\x30\x30\x30\x30\x18\x08\x00",
+        "Ď": b"\x00\xF8\xF8\x19\x1B\x1A\x1B\x39\x70\xE0\x80\x00\x00\x3F\x3F\x30\x30\x30\x30\x38\x1C\x0F\x03\x00",
+        "ď": b"\x00\x80\xC0\xE0\x60\x60\xE0\xFF\xFF\x00\x05\x03\x00\x0F\x1F\x38\x30\x30\x30\x3F\x3F\x00\x00\x00",
+        "Đ": b"\xC0\xFF\xFF\xC3\xC3\x03\x03\x07\x0E\xFC\xF0\x00\x00\x3F\x3F\x30\x30\x30\x30\x38\x1C\x0F\x03\x00",
+        "đ": b"\x00\x80\xC0\xE0\x60\x60\x60\xE4\xC4\xFF\xFF\x04\x00\x0F\x1F\x38\x30\x30\x30\x30\x30\x3F\x3F\x00",
+        "Ē": b"\x00\xFC\xFC\x8C\x8D\x8D\x8D\x8D\x8C\x0C\x0C\x00\x00\x3F\x3F\x31\x31\x31\x31\x31\x31\x30\x30\x00",
+        "ē": b"\x00\x80\xC0\xE0\x68\x68\x68\x68\x68\xC0\x80\x00\x00\x0F\x1F\x3B\x33\x33\x33\x33\x33\x13\x01\x00",
+        "Ĕ": b"\x00\xF8\xF8\x98\x99\x9A\x9A\x99\x98\x18\x18\x00\x00\x3F\x3F\x31\x31\x31\x31\x31\x31\x30\x30\x00",
+        "ĕ": b"\x00\x80\xC0\xE0\x64\x68\x68\x68\x64\xC0\x80\x00\x00\x0F\x1F\x3B\x33\x33\x33\x33\x33\x13\x01\x00",
+        "Ė": b"\x00\xF8\xF8\x98\x98\x98\x9A\x98\x98\x18\x18\x00\x00\x3F\x3F\x31\x31\x31\x31\x31\x31\x30\x30\x00",
+        "ė": b"\x00\x80\xC0\xE0\x60\x60\x68\x60\x60\xC0\x80\x00\x00\x0F\x1F\x3B\x33\x33\x33\x33\x33\x13\x01\x00",
+        "Ę": b"\x00\xFF\xFF\xC3\xC3\xC3\xC3\xC3\xC3\x03\x03\x00\x00\x3F\x3F\x30\x30\x30\x30\x30\x70\xB0\xB0\x00",
+        "ę": b"\x00\x80\xC0\xE0\x60\x60\x60\x60\x60\xC0\x80\x00\x00\x0F\x1F\x3B\x33\x33\x73\xB3\xB3\x13\x01\x00",
+        "Ě": b"\x00\xF8\xF8\x98\x99\x9B\x9A\x9B\x99\x18\x18\x00\x00\x3F\x3F\x31\x31\x31\x31\x31\x31\x30\x30\x00",
+        "ě": b"\x00\x80\xC0\xE0\x64\x6C\x68\x6C\x64\xC0\x80\x00\x00\x0F\x1F\x3B\x33\x33\x33\x33\x33\x13\x01\x00",
+        "Ĝ": b"\x00\x80\xE0\x70\x1A\x1B\x19\x1B\x1A\x38\x30\x00\x00\x03\x0F\x1C\x38\x30\x33\x33\x33\x3F\x3F\x00",
+        "ĝ": b"\x00\x80\xC0\xE0\x68\x6C\x64\x6C\x68\xE0\xE0\x00\x00\x03\xC7\xCE\xCC\xCC\xCC\xCC\xE6\x7F\x3F\x00",
+        "Ğ": b"\x00\x80\xE0\x70\x1A\x19\x19\x19\x1A\x38\x30\x00\x00\x03\x0F\x1C\x38\x30\x33\x33\x33\x3F\x3F\x00",
+        "ğ": b"\x00\x80\xC0\xE0\x68\x64\x64\x64\x68\xE0\xE0\x00\x00\x03\xC7\xCE\xCC\xCC\xCC\xCC\xE6\x7F\x3F\x00",
+        "Ġ": b"\x00\x80\xE0\x70\x18\x18\x1A\x18\x18\x38\x30\x00\x00\x03\x0F\x1C\x38\x30\x33\x33\x33\x3F\x3F\x00",
+        "ġ": b"\x00\x80\xC0\xE0\x60\x60\x68\x60\x60\xE0\xE0\x00\x00\x03\xC7\xCE\xCC\xCC\xCC\xCC\xE6\x7F\x3F\x00",
+        "Ģ": b"\x00\xF0\xFC\x0E\x07\x03\xC3\xC3\xC3\xC7\xC6\x00\x00\x03\x0F\x1C\x38\x30\xB0\x70\x30\x3F\x3F\x00",
+        "ģ": b"\x00\x80\xC0\xE0\x60\x60\x6C\x6A\x60\xE0\xE0\x00\x00\x03\xC7\xCE\xCC\xCC\xCC\xCC\xE6\x7F\x3F\x00",
+        "Ĥ": b"\x00\xFC\xFC\x80\x82\x81\x81\x82\x80\xFC\xFC\x00\x00\x3F\x3F\x01\x01\x01\x01\x01\x01\x3F\x3F\x00",
+        "ĥ": b"\x00\xFE\xFE\xC0\x62\x63\x61\xE3\xC2\x80\x00\x00\x00\x3F\x3F\x00\x00\x00\x00\x00\x3F\x3F\x00\x00",
+        "Ħ": b"\x02\xFF\xFF\xC2\xC2\xC2\xC2\xC2\xC2\xFF\xFF\x02\x00\x3F\x3F\x00\x00\x00\x00\x00\x00\x3F\x3F\x00",
+        "ħ": b"\x04\xFF\xFF\xC4\x64\x60\x60\xE0\xC0\x80\x00\x00\x00\x3F\x3F\x00\x00\x00\x00\x00\x3F\x3F\x00\x00",
+        "Ĩ": b"\x00\x00\x00\x1A\x19\xFB\xFB\x1A\x19\x00\x00\x00\x00\x00\x00\x30\x30\x3F\x3F\x30\x30\x00\x00\x00",
+        "ĩ": b"\x00\x00\x00\x08\x64\xEC\xE8\x04\x00\x00\x00\x00\x00\x00\x00\x30\x30\x3F\x3F\x30\x30\x00\x00\x00",
+        "Ī": b"\x00\x00\x00\x0C\x0D\xFD\xFD\x0D\x0C\x00\x00\x00\x00\x00\x00\x30\x30\x3F\x3F\x30\x30\x00\x00\x00",
+        "ī": b"\x00\x00\x00\x08\x68\xE8\xE8\x00\x00\x00\x00\x00\x00\x00\x00\x30\x30\x3F\x3F\x30\x30\x00\x00\x00",
+        "Ĭ": b"\x00\x00\x00\x18\x19\xFA\xFA\x19\x18\x00\x00\x00\x00\x00\x00\x30\x30\x3F\x3F\x30\x30\x00\x00\x00",
+        "ĭ": b"\x00\x00\x00\x00\x64\xE8\xE8\x04\x00\x00\x00\x00\x00\x00\x00\x30\x30\x3F\x3F\x30\x30\x00\x00\x00",
+        "Į": b"\x00\x00\x00\x03\x03\xFF\xFF\x03\x03\x00\x00\x00\x00\x00\x00\x30\x30\x7F\xBF\xB0\x30\x00\x00\x00",
+        "į": b"\x00\x00\x00\x00\x60\xEC\xEC\x00\x00\x00\x00\x00\x00\x00\x00\x30\x30\x7F\xBF\xB0\x30\x00\x00\x00",
+        "İ": b"\x00\x00\x00\x18\x18\xF8\xFA\x18\x18\x00\x00\x00\x00\x00\x00\x30\x30\x3F\x3F\x30\x30\x00\x00\x00",
+        "ı": b"\x00\x00\x00\x00\x60\xE0\xE0\x00\x00\x00\x00\x00\x00\x00\x00\x30\x30\x3F\x3F\x30\x30\x00\x00\x00",
+        "IJ": b"\x00\x03\xFF\xFF\x03\x00\x00\x00\x03\xFF\xFF\x00\x00\x30\x3F\x3F\x30\x0C\x1C\x30\x30\x3F\x1F\x00",
+        "ij": b"\x00\x00\x20\xEC\xEC\x00\x00\x20\xEC\xEC\x00\x00\x00\x00\x30\x3F\x3F\x70\xC0\xC0\xFF\x7F\x00\x00",
+        "Ĵ": b"\x00\x00\x00\x00\x02\x03\x01\x03\x02\xF8\xF8\x00\x00\x0E\x1E\x38\x30\x30\x30\x30\x38\x1F\x07\x00",
+        "ĵ": b"\x00\x00\x00\x00\x00\x08\x6C\xE4\xEC\x08\x00\x00\x00\x00\x00\x60\xE0\xC0\xC0\xFF\x7F\x00\x00\x00",
+        "Ķ": b"\x00\xFF\xFF\xC0\xE0\xF0\x38\x1C\x0E\x07\x03\x00\x00\x3F\x3F\x00\x01\xA3\x67\x0E\x1C\x38\x30\x00",
+        "ķ": b"\x00\x00\xFF\xFF\x00\x80\xC0\xE0\x60\x00\x00\x00\x00\x00\x3F\x3F\x03\xA7\x6F\x1C\x38\x30\x00\x00",
+        "ĸ": b"\x00\x00\xE0\xE0\x00\x80\xC0\xE0\x60\x20\x00\x00\x00\x00\x3F\x3F\x03\x07\x0F\x1C\x38\x30\x00\x00",
+        "Ĺ": b"\x00\xF8\xFA\x03\x01\x00\x00\x00\x00\x00\x00\x00\x00\x3F\x3F\x30\x30\x30\x30\x30\x30\x30\x30\x00",
+        "ĺ": b"\x00\x00\x00\x00\x18\xFA\xFB\x01\x00\x00\x00\x00\x00\x00\x00\x30\x30\x3F\x3F\x30\x30\x00\x00\x00",
+        "Ļ": b"\x00\xFF\xFF\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x3F\x3F\x30\x30\xB0\x70\x30\x30\x30\x30\x00",
+        "ļ": b"\x00\x00\x00\x00\x03\xFF\xFF\x00\x00\x00\x00\x00\x00\x00\x00\x30\x30\xBF\x7F\x30\x30\x00\x00\x00",
+        "Ľ": b"\x00\xFF\xFF\x00\x00\x05\x03\x00\x00\x00\x00\x00\x00\x3F\x3F\x30\x30\x30\x30\x30\x30\x30\x30\x00",
+        "ľ": b"\x00\x00\x00\x00\x03\xFF\xFF\x00\x05\x03\x00\x00\x00\x00\x00\x30\x30\x3F\x3F\x30\x30\x00\x00\x00",
+        "Ŀ": b"\x00\xFF\xFF\x00\x00\x00\x20\x00\x00\x00\x00\x00\x00\x3F\x3F\x30\x30\x30\x30\x30\x30\x30\x30\x00",
+        "ŀ": b"\x00\x00\x00\x00\x03\xFF\xFF\x00\x40\x00\x00\x00\x00\x00\x00\x30\x30\x3F\x3F\x30\x30\x00\x00\x00",
+        "Ł": b"\x80\xFF\xFF\x20\x10\x00\x00\x00\x00\x00\x00\x00\x00\x3F\x3F\x30\x30\x30\x30\x30\x30\x30\x30\x00",
+        "ł": b"\x00\x00\x00\x00\x83\xFF\xFF\x20\x10\x00\x00\x00\x00\x00\x00\x31\x30\x3F\x3F\x30\x30\x00\x00\x00",
+        "Ń": b"\x00\xFF\xFF\x0E\x38\xF2\xC3\x01\x00\xFF\xFF\x00\x00\x3F\x3F\x00\x00\x00\x03\x07\x1C\x3F\x3F\x00",
+        "ń": b"\x00\x00\xE0\xE0\x60\x68\x6C\x64\xE0\xC0\x80\x00\x00\x00\x3F\x3F\x00\x00\x00\x00\x00\x3F\x3F\x00",
+        "Ņ": b"\x00\xFF\xFF\x0E\x38\xF0\xC0\x00\x00\xFF\xFF\x00\x00\x3F\x3F\x00\x00\xA0\x63\x07\x1C\x3F\x3F\x00",
+        "ņ": b"\x00\x00\xE0\xE0\x60\x60\x60\x60\xE0\xC0\x80\x00\x00\x00\x3F\x3F\x00\x00\xA0\x60\x00\x3F\x3F\x00",
+        "Ň": b"\x00\xFF\xFF\x0E\x38\xF1\xC2\x01\x00\xFF\xFF\x00\x00\x3F\x3F\x00\x00\x00\x03\x07\x1C\x3F\x3F\x00",
+        "ň": b"\x00\x00\xE0\xE0\x64\x6C\x68\x6C\xE4\xC0\x80\x00\x00\x00\x3F\x3F\x00\x00\x00\x00\x00\x3F\x3F\x00",
+        "ʼn": b"\x00\x0A\xE6\xE0\x60\x60\x60\x60\xE0\xC0\x80\x00\x00\x00\x3F\x3F\x00\x00\x00\x00\x00\x3F\x3F\x00",
+        "Ŋ": b"\x00\x00\xFF\xFF\x06\x03\x03\x03\x07\xFE\xFC\x00\x00\x00\x3F\x3F\x00\x00\x20\x20\x30\x1F\x0F\x00",
+        "ŋ": b"\x00\x00\xE0\xE0\x60\x60\x60\x60\xE0\xC0\x80\x00\x00\x00\x3F\x3F\x00\x00\x00\xC0\xC0\xFF\x7F\x00",
+        "Ō": b"\x00\xC0\xF0\x38\x1D\x0D\x0D\x1D\x38\xF0\xC0\x00\x00\x03\x0F\x1C\x38\x30\x30\x38\x1C\x0F\x03\x00",
+        "ō": b"\x00\x80\xC0\xE0\x68\x68\x68\x68\xE0\xC0\x80\x00\x00\x0F\x1F\x38\x30\x30\x30\x30\x38\x1F\x0F\x00",
+        "Ŏ": b"\x00\x80\xE0\x70\x39\x1A\x1A\x39\x70\xE0\x80\x00\x00\x03\x0F\x1C\x38\x30\x30\x38\x1C\x0F\x03\x00",
+        "ŏ": b"\x00\x80\xC0\xE0\x64\x68\x68\x64\xE0\xC0\x80\x00\x00\x0F\x1F\x38\x30\x30\x30\x30\x38\x1F\x0F\x00",
+        "Ő": b"\x00\x80\xE0\x70\x3A\x19\x1A\x39\x70\xE0\x80\x00\x00\x03\x0F\x1C\x38\x30\x30\x38\x1C\x0F\x03\x00",
+        "ő": b"\x00\x80\xC0\xE0\x68\x64\x68\x64\xE0\xC0\x80\x00\x00\x0F\x1F\x38\x30\x30\x30\x30\x38\x1F\x0F\x00",
+        "Œ": b"\xF0\xFC\x0E\x03\x03\x07\xFE\xFF\xC3\xC3\xC3\x00\x03\x0F\x1C\x30\x30\x38\x1F\x3F\x30\x30\x30\x00",
+        "œ": b"\x80\xC0\xE0\x60\x60\xE0\xC0\x60\x60\x60\x40\x80\x0F\x1F\x38\x30\x30\x1F\x1F\x3B\x33\x33\x1B\x09",
+        "Ŕ": b"\x00\xF8\xF8\x98\x98\x9A\x9B\x99\xF8\xF0\x60\x00\x00\x3F\x3F\x01\x01\x03\x07\x0F\x1D\x38\x30\x00",
+        "ŕ": b"\x00\x00\xE0\xE0\xC0\x60\x68\x6C\x64\xE0\xC0\x00\x00\x00\x3F\x3F\x00\x00\x00\x00\x00\x00\x00\x00",
+        "Ŗ": b"\x00\xFF\xFF\x83\x83\x83\x83\x83\xC7\xFE\x7C\x00\x00\x3F\x3F\x01\x01\xA3\x67\x0F\x1D\x38\x30\x00",
+        "ŗ": b"\x00\x00\xE0\xE0\xC0\x60\x60\x60\x60\xE0\xC0\x00\x00\x00\x3F\x3F\x00\xA0\x60\x00\x00\x00\x00\x00",
+        "Ř": b"\x00\xF8\xF8\x99\x9B\x9A\x9B\x99\xF8\xF0\x60\x00\x00\x3F\x3F\x01\x01\x03\x07\x0F\x1D\x38\x30\x00",
+        "ř": b"\x00\x00\xE0\xE0\xC4\x6C\x68\x6C\x64\xE0\xC0\x00\x00\x00\x3F\x3F\x00\x00\x00\x00\x00\x00\x00\x00",
+        "Ś": b"\x00\x60\xF0\xF8\x98\x9A\x9B\x99\x98\x30\x20\x00\x00\x0C\x1C\x39\x31\x31\x31\x31\x3B\x1F\x0E\x00",
+        "ś": b"\x00\xC0\xE0\x60\x68\x6C\x64\x60\x40\x00\x00\x00\x00\x11\x33\x33\x33\x33\x33\x3F\x1E\x00\x00\x00",
+        "Ŝ": b"\x00\x60\xF0\xF8\x9A\x9B\x99\x9B\x9A\x30\x20\x00\x00\x0C\x1C\x39\x31\x31\x31\x31\x3B\x1F\x0E\x00",
+        "ŝ": b"\x00\xC0\xE0\x68\x6C\x64\x6C\x68\x40\x00\x00\x00\x00\x11\x33\x33\x33\x33\x33\x3F\x1E\x00\x00\x00",
+        "Ş": b"\x00\x3C\x7E\xE7\xC3\xC3\xC3\xC3\xC7\x8E\x0C\x00\x00\x0C\x1C\x38\x30\xB0\xF0\x30\x39\x1F\x0F\x00",
+        "ş": b"\x00\xC0\xE0\x60\x60\x60\x60\x60\x40\x00\x00\x00\x00\x11\x33\x33\xB3\xF3\x33\x3F\x1E\x00\x00\x00",
+        "Š": b"\x00\x60\xF0\xF8\x99\x9B\x9A\x9B\x99\x30\x20\x00\x00\x0C\x1C\x39\x31\x31\x31\x31\x3B\x1F\x0E\x00",
+        "š": b"\x00\xC0\xE0\x64\x6C\x68\x6C\x64\x40\x00\x00\x00\x00\x11\x33\x33\x33\x33\x33\x3F\x1E\x00\x00\x00",
+        "Ţ": b"\x00\x00\x03\x03\x03\xFF\xFF\x03\x03\x03\x00\x00\x00\x00\x00\x00\x00\xBF\xBF\x60\x00\x00\x00\x00",
+        "ţ": b"\x00\x60\x60\xFE\xFE\x60\x60\x60\x00\x00\x00\x00\x00\x00\x00\x1F\x3F\xB0\xB0\xF0\x30\x00\x00\x00",
+        "Ť": b"\x00\x00\x18\x19\x1B\xFA\xFA\x1B\x19\x18\x00\x00\x00\x00\x00\x00\x00\x3F\x3F\x00\x00\x00\x00\x00",
+        "ť": b"\x00\x60\x60\xFE\xFE\x60\x65\x63\x00\x00\x00\x00\x00\x00\x00\x1F\x3F\x30\x30\x30\x30\x00\x00\x00",
+        "Ŧ": b"\x00\x00\x03\xC3\xC3\xFF\xFF\xC3\xC3\x03\x00\x00\x00\x00\x00\x00\x00\x3F\x3F\x00\x00\x00\x00\x00",
+        "ŧ": b"\x00\x30\x30\xFE\xFE\x30\x30\x30\x00\x00\x00\x00\x00\x03\x03\x1F\x3F\x33\x33\x30\x30\x00\x00\x00",
+        "Ũ": b"\x00\xF8\xF8\x02\x01\x03\x03\x02\x01\xF8\xF8\x00\x00\x07\x1F\x38\x30\x30\x30\x30\x38\x1F\x07\x00",
+        "ũ": b"\x00\xE0\xE0\x08\x04\x0C\x0C\x08\x04\xE0\xE0\x00\x00\x0F\x1F\x38\x30\x30\x30\x30\x18\x3F\x3F\x00",
+        "Ū": b"\x00\xFC\xFC\x00\x01\x01\x01\x01\x00\xFC\xFC\x00\x00\x07\x1F\x38\x30\x30\x30\x30\x38\x1F\x07\x00",
+        "ū": b"\x00\xE0\xE0\x00\x08\x08\x08\x08\x00\xE0\xE0\x00\x00\x0F\x1F\x38\x30\x30\x30\x30\x18\x3F\x3F\x00",
+        "Ŭ": b"\x00\xFC\xFC\x00\x01\x02\x02\x01\x00\xFC\xFC\x00\x00\x07\x1F\x38\x30\x30\x30\x30\x38\x1F\x07\x00",
+        "ŭ": b"\x00\xE0\xE0\x00\x04\x08\x08\x04\x00\xE0\xE0\x00\x00\x0F\x1F\x38\x30\x30\x30\x30\x18\x3F\x3F\x00",
+        "Ů": b"\x00\xF8\xF8\x00\x06\x09\x09\x06\x00\xF8\xF8\x00\x00\x07\x1F\x38\x30\x30\x30\x30\x38\x1F\x07\x00",
+        "ů": b"\x00\xE0\xE0\x00\x0C\x12\x12\x0C\x00\xE0\xE0\x00\x00\x0F\x1F\x38\x30\x30\x30\x30\x18\x3F\x3F\x00",
+        "Ű": b"\x00\xF8\xF8\x00\x02\x01\x02\x01\x00\xF8\xF8\x00\x00\x07\x1F\x38\x30\x30\x30\x30\x38\x1F\x07\x00",
+        "ű": b"\x00\xE0\xE0\x00\x08\x04\x08\x04\x00\xE0\xE0\x00\x00\x0F\x1F\x38\x30\x30\x30\x30\x18\x3F\x3F\x00",
+        "Ų": b"\x00\xFF\xFF\x00\x00\x00\x00\x00\x00\xFF\xFF\x00\x00\x07\x1F\x38\x30\xF0\xB0\xB0\x38\x1F\x07\x00",
+        "ų": b"\x00\xE0\xE0\x00\x00\x00\x00\x00\x00\xE0\xE0\x00\x00\x0F\x1F\x38\x30\xF0\xB0\xB0\x18\x3F\x3F\x00",
+        "Ŵ": b"\x00\xFC\xFC\x00\x02\x81\x81\x02\x00\xFC\xFC\x00\x00\x3F\x3F\x1C\x06\x03\x03\x06\x1C\x3F\x3F\x00",
+        "ŵ": b"\x00\xE0\xE0\x00\x04\xE8\xE8\x04\x00\xE0\xE0\x00\x00\x07\x1F\x38\x1C\x0F\x0F\x1C\x38\x1F\x07\x00",
+        "Ŷ": b"\x00\x02\x0E\x3C\xF2\xC1\xC1\xF2\x3C\x0E\x02\x00\x00\x00\x00\x00\x00\x3F\x3F\x00\x00\x00\x00\x00",
+        "ŷ": b"\x00\x00\x60\xE0\x88\x04\x04\x88\xE0\x60\x00\x00\x00\x00\x00\x81\xE7\x7E\x1E\x07\x01\x00\x00\x00",
+        "Ÿ": b"\x00\x02\x0E\x3C\xF1\xC0\xC0\xF1\x3C\x0E\x02\x00\x00\x00\x00\x00\x00\x3F\x3F\x00\x00\x00\x00\x00",
+        "Ź": b"\x00\x18\x18\x18\x18\x1A\x9B\xD9\xF8\x78\x38\x00\x00\x30\x38\x3C\x3E\x37\x33\x31\x30\x30\x30\x00",
+        "ź": b"\x00\x60\x60\x60\x68\x6C\xE4\xE0\x60\x20\x00\x00\x00\x30\x38\x3C\x36\x33\x31\x30\x30\x30\x00\x00",
+        "Ż": b"\x00\x18\x18\x18\x18\x18\x9A\xD8\xF8\x78\x38\x00\x00\x30\x38\x3C\x3E\x37\x33\x31\x30\x30\x30\x00",
+        "ż": b"\x00\x60\x60\x60\x60\x68\xE0\xE0\x60\x20\x00\x00\x00\x30\x38\x3C\x36\x33\x31\x30\x30\x30\x00\x00",
+        "Ž": b"\x00\x18\x18\x18\x19\x1B\x9A\xDB\xF9\x78\x38\x00\x00\x30\x38\x3C\x3E\x37\x33\x31\x30\x30\x30\x00",
+        "ž": b"\x00\x60\x60\x64\x6C\x68\xEC\xE4\x60\x20\x00\x00\x00\x30\x38\x3C\x36\x33\x31\x30\x30\x30\x00\x00",
+        "ſ": b"\x00\x00\x00\x00\xFC\xFE\x06\x06\x0E\x0C\x00\x00\x00\x00\x30\x30\x3F\x3F\x30\x00\x00\x00\x00\x00",
+    }
+    return font
+
+
+def get_font_map_cyrillic() -> Dict[str, bytes]:
+    font = {
+        # U+0400..U+04FF Cyrillic
+        "Ѐ": b"\x00\xFC\xFC\x8D\x8F\x8E\x8C\x8C\x8C\x0C\x0C\x00\x00\x3F\x3F\x31\x31\x31\x31\x31\x31\x30\x30\x00",
+        "Ё": b"\x00\xFE\xFE\xC7\xC7\xC6\xC6\xC7\xC7\x06\x06\x00\x00\x3F\x3F\x30\x30\x30\x30\x30\x30\x30\x30\x00",
+        "Ђ": b"\x00\x03\xFF\xFF\x83\xC3\xC3\xC3\xC0\x80\x00\x00\x00\x00\x3F\x3F\x01\x00\x30\x30\x39\x1F\x0F\x00",
+        "Ѓ": b"\x00\xFC\xFC\x0C\x0C\x0C\x0E\x0F\x0D\x0C\x0C\x00\x00\x3F\x3F\x00\x00\x00\x00\x00\x00\x00\x00\x00",
+        "Є": b"\x00\xF8\xFC\xCE\xC7\xC3\xC3\xC3\x07\x0E\x0C\x00\x00\x07\x0F\x1C\x38\x30\x30\x30\x38\x1C\x0C\x00",
+        "Ѕ": b"\x00\x3C\x7E\x67\xE3\xC3\xC3\xC3\x87\x8E\x0C\x00\x00\x0C\x1C\x38\x30\x30\x30\x31\x39\x1F\x0F\x00",
+        "І": b"\x00\x00\x00\x03\x03\xFF\xFF\x03\x03\x00\x00\x00\x00\x00\x00\x30\x30\x3F\x3F\x30\x30\x00\x00\x00",
+        "Ї": b"\x00\x00\x00\x0D\x0D\xFC\xFC\x0D\x0D\x00\x00\x00\x00\x00\x00\x30\x30\x3F\x3F\x30\x30\x00\x00\x00",
+        "Ј": b"\x00\x00\x00\x00\x00\x00\x03\x03\x03\xFF\xFF\x00\x00\x0E\x1E\x38\x30\x30\x30\x30\x38\x1F\x0F\x00",
+        "Љ": b"\x00\x00\xFE\xFF\x03\x03\xFF\xFF\xC0\xC0\x80\x00\x00\x30\x3F\x1F\x00\x00\x3F\x3F\x30\x39\x1F\x0F",
+        "Њ": b"\x00\xFF\xFF\xC0\xC0\xC0\xFF\xFF\xC0\xC0\x80\x00\x00\x3F\x3F\x00\x00\x00\x3F\x3F\x30\x39\x1F\x0F",
+        "Ћ": b"\x00\x03\xFF\xFF\xC3\xC3\xC3\xC3\xC0\x80\x00\x00\x00\x00\x3F\x3F\x01\x00\x00\x00\x01\x3F\x3F\x00",
+        "Ќ": b"\x00\xFF\xFF\xC0\xE2\xF3\x39\x1C\x0E\x07\x03\x00\x00\x3F\x3F\x00\x01\x03\x07\x0E\x1C\x38\x30\x00",
+        "Ѝ": b"\x00\xFF\xFF\x00\x01\xC3\xF2\x38\x0E\xFF\xFF\x00\x00\x3F\x3F\x1C\x07\x03\x00\x00\x00\x3F\x3F\x00",
+        "Ў": b"\x00\x07\x1F\x7C\xF1\xC1\xC1\xF1\x7C\x1F\x07\x00\x00\x00\x30\x30\x3C\x0F\x07\x01\x00\x00\x00\x00",
+        "Џ": b"\x00\xFF\xFF\x00\x00\x00\x00\x00\x00\xFF\xFF\x00\x00\x1F\x1F\x18\x18\x78\x78\x18\x18\x1F\x1F\x00",
+        "А": b"\x00\x00\x00\xE0\xFC\x1F\x1F\xFC\xE0\x00\x00\x00\x00\x38\x3F\x07\x06\x06\x06\x06\x07\x3F\x38\x00",
+        "Б": b"\x00\xFF\xFF\xC3\xC3\xC3\xC3\xC3\xC3\x83\x00\x00\x00\x3F\x3F\x30\x30\x30\x30\x30\x39\x1F\x0F\x00",
+        "В": b"\x00\xFF\xFF\xC3\xC3\xC3\xC3\xE7\xFE\xBC\x00\x00\x00\x3F\x3F\x30\x30\x30\x30\x30\x39\x1F\x0F\x00",
+        "Г": b"\x00\xFF\xFF\x03\x03\x03\x03\x03\x03\x03\x03\x00\x00\x3F\x3F\x00\x00\x00\x00\x00\x00\x00\x00\x00",
+        "Ґ": b"\x00\xFC\xFC\x0C\x0C\x0C\x0C\x0C\x0C\x0F\x0F\x00\x00\x3F\x3F\x00\x00\x00\x00\x00\x00\x00\x00\x00",
+        "Д": b"\x00\x00\xF8\xFE\x0F\x03\x03\x03\xFF\xFF\x00\x00\x00\x70\x7F\x1F\x18\x18\x18\x18\x1F\x7F\x70\x00",
+        "Е": b"\x00\xFF\xFF\xC3\xC3\xC3\xC3\xC3\xC3\x03\x03\x00\x00\x3F\x3F\x30\x30\x30\x30\x30\x30\x30\x30\x00",
+        "Ж": b"\x00\x03\x0F\xFC\xE0\xFF\xFF\xE0\xFC\x0F\x03\x00\x00\x38\x3F\x07\x00\x3F\x3F\x00\x07\x3F\x38\x00",
+        "З": b"\x0C\x0E\x07\x03\xC3\xC3\xC3\xC3\xC3\xE7\x7E\x3C\x0C\x1C\x38\x30\x30\x30\x30\x30\x30\x39\x1F\x0E",
+        "И": b"\x00\xFF\xFF\x00\x00\xC0\xF0\x38\x0E\xFF\xFF\x00\x00\x3F\x3F\x1C\x07\x03\x00\x00\x00\x3F\x3F\x00",
+        "Й": b"\x00\xFF\xFF\x00\x02\xC3\xF1\x38\x0E\xFF\xFF\x00\x00\x3F\x3F\x1C\x07\x03\x00\x00\x00\x3F\x3F\x00",
+        "К": b"\x00\xFF\xFF\xC0\xE0\xF0\x38\x1C\x0E\x07\x03\x00\x00\x3F\x3F\x00\x01\x03\x07\x0E\x1C\x38\x30\x00",
+        "Л": b"\x00\x00\xF0\xFC\x1E\x07\x03\x03\x03\xFF\xFF\x00\x00\x30\x3F\x1F\x00\x00\x00\x00\x00\x3F\x3F\x00",
+        "М": b"\x00\xFF\xFF\x1E\x78\xE0\xE0\x78\x1E\xFF\xFF\x00\x00\x3F\x3F\x00\x00\x01\x01\x00\x00\x3F\x3F\x00",
+        "Н": b"\x00\xFF\xFF\xC0\xC0\xC0\xC0\xC0\xC0\xFF\xFF\x00\x00\x3F\x3F\x00\x00\x00\x00\x00\x00\x3F\x3F\x00",
+        "О": b"\x00\xF0\xFC\x0E\x07\x03\x03\x07\x0E\xFC\xF0\x00\x00\x03\x0F\x1C\x38\x30\x30\x38\x1C\x0F\x03\x00",
+        "П": b"\x00\xFF\xFF\x03\x03\x03\x03\x03\x03\xFF\xFF\x00\x00\x3F\x3F\x00\x00\x00\x00\x00\x00\x3F\x3F\x00",
+        "Р": b"\x00\xFF\xFF\x83\x83\x83\x83\x83\xC7\xFE\x7C\x00\x00\x3F\x3F\x01\x01\x01\x01\x01\x01\x00\x00\x00",
+        "С": b"\x00\xF0\xFC\x0E\x07\x03\x03\x03\x07\x0E\x0C\x00\x00\x03\x0F\x1C\x38\x30\x30\x30\x38\x1C\x0C\x00",
+        "Т": b"\x00\x03\x03\x03\x03\xFF\xFF\x03\x03\x03\x03\x00\x00\x00\x00\x00\x00\x3F\x3F\x00\x00\x00\x00\x00",
+        "У": b"\x00\x07\x1F\x7C\xF0\xC0\xC0\xF0\x7C\x1F\x07\x00\x00\x00\x30\x30\x3C\x0F\x07\x01\x00\x00\x00\x00",
+        "Ф": b"\x00\xF8\xFC\x0E\x06\xFF\xFF\x06\x0E\xFC\xF8\x00\x00\x03\x07\x0E\x0C\x3F\x3F\x0C\x0E\x07\x03\x00",
+        "Х": b"\x00\x03\x0F\x3C\xF0\xC0\xC0\xF0\x3C\x0F\x03\x00\x00\x30\x3C\x0F\x03\x00\x00\x03\x0F\x3C\x30\x00",
+        "Ц": b"\x00\xFF\xFF\x00\x00\x00\x00\x00\xFF\xFF\x00\x00\x00\x1F\x1F\x18\x18\x18\x18\x18\x1F\x7F\x78\x00",
+        "Ч": b"\x00\x7F\xFF\xC0\xC0\xC0\xC0\xC0\xC0\xFF\xFF\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x3F\x3F\x00",
+        "Ш": b"\x00\xFF\xFF\x00\x00\xFF\xFF\x00\x00\xFF\xFF\x00\x00\x3F\x3F\x30\x30\x3F\x3F\x30\x30\x3F\x3F\x00",
+        "Щ": b"\x00\xFF\xFF\x00\x00\xFF\xFF\x00\x00\xFF\xFF\x00\x00\x1F\x1F\x18\x18\x1F\x1F\x18\x18\x1F\x7F\x70",
+        "Ъ": b"\x03\x03\xFF\xFF\xC0\xC0\xC0\xC0\xC0\x80\x00\x00\x00\x00\x3F\x3F\x30\x30\x30\x30\x39\x1F\x0F\x00",
+        "Ы": b"\x00\xFF\xFF\xC0\xC0\xC0\xC0\x80\x00\x00\xFF\xFF\x00\x3F\x3F\x30\x30\x30\x39\x1F\x0F\x00\x3F\x3F",
+        "Ь": b"\x00\xFF\xFF\xC0\xC0\xC0\xC0\xC0\xC0\x80\x00\x00\x00\x3F\x3F\x30\x30\x30\x30\x30\x39\x1F\x0F\x00",
+        "Э": b"\x00\x0C\x0E\x07\xC3\xC3\xC3\xC7\xCE\xFC\xF8\x00\x00\x0C\x1C\x38\x30\x30\x30\x38\x1C\x0F\x07\x00",
+        "Ю": b"\x00\xFF\xFF\xC0\xFC\xFE\x07\x03\x07\xFE\xFC\x00\x00\x3F\x3F\x00\x0F\x1F\x38\x30\x38\x1F\x0F\x00",
+        "Я": b"\x00\x7C\xFE\xC7\x83\x83\x83\x83\x83\xFF\xFF\x00\x00\x30\x38\x1D\x0F\x07\x03\x01\x01\x3F\x3F\x00",
+        "а": b"\x00\x00\x30\x30\x30\x30\x30\x30\x30\xF0\xE0\x00\x00\x1E\x3F\x33\x33\x33\x33\x33\x33\x3F\x3F\x00",
+        "б": b"\x00\xE0\xF0\x30\x30\x30\x30\x30\x30\x30\x00\x00\x00\x1F\x3F\x33\x33\x33\x33\x33\x33\x3F\x1E\x00",
+        "в": b"\x00\xF0\xF0\x30\x30\x30\x30\x30\xF0\xE0\x00\x00\x00\x3F\x3F\x33\x33\x33\x33\x33\x33\x3F\x1E\x00",
+        "г": b"\x00\xF0\xF0\x30\x30\x30\x30\x30\x30\x30\x30\x00\x00\x3F\x3F\x00\x00\x00\x00\x00\x00\x00\x00\x00",
+        "ґ": b"\x00\xF0\xF0\x30\x30\x30\x30\x30\x30\x3C\x3C\x00\x00\x3F\x3F\x00\x00\x00\x00\x00\x00\x00\x00\x00",
+        "д": b"\x00\x00\xC0\xE0\x70\x30\x30\x30\xF0\xF0\x00\x00\x00\x60\x7F\x3F\x30\x30\x30\x30\x3F\x7F\x60\x00",
+        "е": b"\x00\xE0\xF0\x30\x30\x30\x30\x30\x30\xF0\xE0\x00\x00\x1F\x3F\x33\x33\x33\x33\x33\x33\x33\x33\x00",
+        "ж": b"\x00\x30\xF0\xC0\x00\xF0\xF0\x00\xC0\xF0\x30\x00\x00\x30\x3C\x0F\x03\x3F\x3F\x03\x0F\x3C\x30\x00",
+        "з": b"\x00\x60\x70\x30\x30\x30\x30\x30\x30\xF0\xE0\x00\x00\x18\x38\x30\x33\x33\x33\x33\x33\x3F\x1D\x00",
+        "и": b"\x00\xF0\xF0\x00\x00\x00\x80\xC0\xE0\xF0\xF0\x00\x00\x3F\x3F\x1C\x0E\x07\x03\x01\x00\x3F\x3F\x00",
+        "й": b"\x00\xF0\xF0\x00\x04\x08\x88\xC4\xE0\xF0\xF0\x00\x00\x3F\x3F\x1C\x0E\x07\x03\x01\x00\x3F\x3F\x00",
+        "к": b"\x00\xF0\xF0\x80\x80\xC0\xE0\x70\x30\x10\x00\x00\x00\x3F\x3F\x03\x03\x07\x0E\x1C\x38\x30\x20\x00",
+        "л": b"\x00\x00\xC0\xE0\x70\x30\x30\x30\x30\xF0\xF0\x00\x00\x30\x3F\x1F\x00\x00\x00\x00\x00\x3F\x3F\x00",
+        "м": b"\x00\xF0\xF0\xE0\xC0\x80\x80\xC0\xE0\xF0\xF0\x00\x00\x3F\x3F\x00\x01\x03\x03\x01\x00\x3F\x3F\x00",
+        "н": b"\x00\xF0\xF0\x00\x00\x00\x00\x00\x00\xF0\xF0\x00\x00\x3F\x3F\x03\x03\x03\x03\x03\x03\x3F\x3F\x00",
+        "о": b"\x00\xC0\xE0\x70\x30\x30\x30\x30\x70\xE0\xC0\x00\x00\x0F\x1F\x38\x30\x30\x30\x30\x38\x1F\x0F\x00",
+        "п": b"\x00\xF0\xF0\x30\x30\x30\x30\x30\x30\xF0\xF0\x00\x00\x3F\x3F\x00\x00\x00\x00\x00\x00\x3F\x3F\x00",
+        "р": b"\x00\xF0\xF0\x30\x30\x30\x30\x30\x70\xE0\xC0\x00\x00\xFF\xFF\x0C\x0C\x0C\x0C\x0C\x0E\x07\x03\x00",
+        "с": b"\x00\xC0\xE0\x70\x30\x30\x30\x30\x70\x60\x40\x00\x00\x0F\x1F\x38\x30\x30\x30\x30\x38\x18\x08\x00",
+        "т": b"\x00\x30\x30\x30\x30\xF0\xF0\x30\x30\x30\x30\x00\x00\x00\x00\x00\x00\x3F\x3F\x00\x00\x00\x00\x00",
+        "у": b"\x00\x30\xF0\xC0\x00\x00\x00\x00\xC0\xF0\x30\x00\x00\x60\xE0\xC3\xE7\x7C\x3C\x0F\x03\x00\x00\x00",
+        "ф": b"\x00\x80\xC0\x60\x60\xF0\xF0\x60\x60\xC0\x80\x00\x00\x0F\x1F\x30\x30\xFF\xFF\x30\x30\x1F\x0F\x00",
+        "х": b"\x00\x30\x70\xC0\x80\x00\x00\x80\xC0\x70\x30\x00\x00\x30\x38\x0C\x07\x03\x03\x07\x0C\x38\x30\x00",
+        "ц": b"\x00\xF0\xF0\x00\x00\x00\x00\x00\xF0\xF0\x00\x00\x00\x3F\x3F\x30\x30\x30\x30\x30\x3F\xFF\xF0\x00",
+        "ч": b"\x00\xF0\xF0\x00\x00\x00\x00\x00\x00\xF0\xF0\x00\x00\x01\x03\x03\x03\x03\x03\x03\x03\x3F\x3F\x00",
+        "ш": b"\x00\xF0\xF0\x00\x00\xE0\xE0\x00\x00\xF0\xF0\x00\x00\x3F\x3F\x30\x30\x3F\x3F\x30\x30\x3F\x3F\x00",
+        "щ": b"\x00\xF0\xF0\x00\x00\xF0\xF0\x00\x00\xF0\xF0\x00\x00\x3F\x3F\x30\x30\x3F\x3F\x30\x30\x3F\xFF\xE0",
+        "ъ": b"\x30\x30\xF0\xF0\x80\x80\x80\x80\x80\x00\x00\x00\x00\x00\x3F\x3F\x31\x31\x31\x31\x3B\x1F\x0E\x00",
+        "ы": b"\x00\xF0\xF0\x80\x80\x80\x00\x00\x00\xF0\xF0\x00\x00\x3F\x3F\x31\x31\x3B\x1F\x0E\x00\x3F\x3F\x00",
+        "ь": b"\x00\xF0\xF0\x80\x80\x80\x80\x80\x80\x00\x00\x00\x00\x3F\x3F\x31\x31\x31\x31\x31\x3B\x1F\x0E\x00",
+        "э": b"\x00\x40\x60\x70\x30\x30\x30\x30\x70\xE0\xC0\x00\x00\x08\x18\x38\x30\x33\x33\x33\x3B\x1F\x0F\x00",
+        "ю": b"\x00\xF0\xF0\x00\xE0\xF0\x30\x30\x30\xF0\xE0\x00\x00\x3F\x3F\x03\x1F\x3F\x30\x30\x30\x3F\x1F\x00",
+        "я": b"\x00\xC0\xE0\x70\x30\x30\x30\x30\x30\xF0\xF0\x00\x00\x21\x33\x3B\x1E\x0E\x06\x06\x06\x3F\x3F\x00",
+        "ѐ": b"\x00\xE0\xF0\x32\x36\x36\x34\x30\x30\xF0\xE0\x00\x00\x1F\x3F\x33\x33\x33\x33\x33\x33\x33\x33\x00",
+        "ё": b"\x00\xE0\xF0\x34\x34\x30\x30\x34\x34\xF0\xE0\x00\x00\x1F\x3F\x33\x33\x33\x33\x33\x33\x33\x33\x00",
+        "ђ": b"\x00\x30\xFC\xFC\x30\xB0\xB0\xB0\x80\x80\x00\x00\x00\x00\x3F\x3F\x07\x03\x01\x01\xC1\xFF\x3F\x00",
+        "ѓ": b"\x00\xF0\xF0\x30\x30\x34\x36\x32\x30\x30\x30\x00\x00\x3F\x3F\x00\x00\x00\x00\x00\x00\x00\x00\x00",
+        "є": b"\x00\xC0\xE0\x70\x30\x30\x30\x30\x70\x60\x40\x00\x00\x0F\x1F\x3B\x33\x33\x33\x30\x38\x18\x08\x00",
+        "ѕ": b"\x00\xE0\xF0\xB0\xB0\x30\x30\x30\x30\x70\x60\x00\x00\x18\x39\x31\x33\x33\x33\x37\x36\x3E\x1C\x00",
+        "і": b"\x00\x00\x00\x00\x30\xF6\xF6\x00\x00\x00\x00\x00\x00\x00\x00\x30\x30\x3F\x3F\x30\x30\x00\x00\x00",
+        "ї": b"\x00\x00\x00\x04\x34\xF0\xF4\x04\x00\x00\x00\x00\x00\x00\x00\x30\x30\x3F\x3F\x30\x30\x00\x00\x00",
+        "ј": b"\x00\x00\x00\x00\x00\x30\x30\xF6\xF6\x00\x00\x00\x00\x00\x00\x60\xE0\xC0\xC0\xFF\x7F\x00\x00\x00",
+        "љ": b"\x00\x00\xE0\xF0\x30\x30\xF0\xF0\x00\x00\x00\x00\x00\x30\x3F\x1F\x00\x00\x3F\x3F\x33\x33\x1E\x0C",
+        "њ": b"\x00\xF0\xF0\x00\x00\x00\xF0\xF0\x00\x00\x00\x00\x00\x3F\x3F\x03\x03\x03\x3F\x3F\x33\x33\x1E\x0C",
+        "ћ": b"\x00\x30\xFC\xFC\xB0\xB0\xB0\xB0\x80\x80\x00\x00\x00\x00\x3F\x3F\x01\x01\x01\x01\x01\x3F\x3F\x00",
+        "ќ": b"\x00\xF0\xF0\x80\x88\xCC\xE4\x70\x30\x10\x00\x00\x00\x3F\x3F\x03\x03\x07\x0E\x1C\x38\x30\x20\x00",
+        "ѝ": b"\x00\xF0\xF0\x00\x06\x0C\x88\xC0\xE0\xF0\xF0\x00\x00\x3F\x3F\x1C\x0E\x07\x03\x01\x00\x3F\x3F\x00",
+        "ў": b"\x00\x30\xF0\xC0\x04\x08\x08\x04\xC0\xF0\x30\x00\x00\x60\xE0\xC3\xE7\x7C\x3C\x0F\x03\x00\x00\x00",
+        "џ": b"\x00\xF0\xF0\x00\x00\x00\x00\x00\x00\xF0\xF0\x00\x00\x3F\x3F\x30\x30\xF0\xF0\x30\x30\x3F\x3F\x00",
+    }
+    return font
+
+
+def get_small_font_map_ascii_basic() -> Dict[str, bytes]:
+    font = {
+        # U+0000..U+007F Basic Latin
+        " ": b"\x00\x00\x00\x00\x00\x00",
+        "!": b"\x00\x00\x4f\x00\x00\x00",
+        '"': b"\x00\x07\x00\x07\x00\x00",
+        "#": b"\x14\x7f\x14\x7f\x14\x00",
+        "$": b"\x24\x2a\x7f\x2a\x12\x00",
+        "%": b"\x23\x13\x08\x64\x62\x00",
+        "&": b"\x36\x49\x56\x20\x58\x00",
+        "'": b"\x00\x05\x03\x00\x00\x00",
+        "(": b"\x00\x1c\x22\x41\x00\x00",
+        ")": b"\x00\x41\x22\x1c\x00\x00",
+        "*": b"\x14\x08\x3e\x08\x14\x00",
+        "+": b"\x08\x08\x3e\x08\x08\x00",
+        ",": b"\x00\x50\x30\x00\x00\x00",
+        "-": b"\x08\x08\x08\x08\x08\x00",
+        ".": b"\x00\x60\x60\x00\x00\x00",
+        "/": b"\x20\x10\x08\x04\x02\x00",
+        "0": b"\x3e\x51\x49\x45\x3e\x00",
+        "1": b"\x00\x42\x7f\x40\x00\x00",
+        "2": b"\x42\x61\x51\x49\x46\x00",
+        "3": b"\x21\x41\x45\x4b\x31\x00",
+        "4": b"\x18\x14\x12\x7f\x10\x00",
+        "5": b"\x27\x45\x45\x45\x39\x00",
+        "6": b"\x3c\x4a\x49\x49\x30\x00",
+        "7": b"\x01\x71\x09\x05\x03\x00",
+        "8": b"\x36\x49\x49\x49\x36\x00",
+        "9": b"\x06\x49\x49\x29\x1e\x00",
+        ":": b"\x00\x36\x36\x00\x00\x00",
+        ";": b"\x00\x56\x36\x00\x00\x00",
+        "<": b"\x08\x14\x22\x41\x00\x00",
+        "=": b"\x14\x14\x14\x14\x14\x00",
+        ">": b"\x00\x41\x22\x14\x08\x00",
+        "?": b"\x02\x01\x51\x09\x06\x00",
+        "@": b"\x32\x49\x79\x41\x3e\x00",
+        "A": b"\x7e\x09\x09\x09\x7e\x00",
+        "B": b"\x7f\x49\x49\x49\x36\x00",
+        "C": b"\x3e\x41\x41\x41\x22\x00",
+        "D": b"\x7f\x41\x41\x22\x1c\x00",
+        "E": b"\x7f\x49\x49\x49\x41\x00",
+        "F": b"\x7f\x09\x09\x09\x01\x00",
+        "G": b"\x3e\x41\x41\x49\x7a\x00",
+        "H": b"\x7f\x08\x08\x08\x7f\x00",
+        "I": b"\x00\x41\x7f\x41\x00\x00",
+        "J": b"\x20\x40\x41\x3f\x01\x00",
+        "K": b"\x7f\x08\x14\x22\x41\x00",
+        "L": b"\x7f\x40\x40\x40\x40\x00",
+        "M": b"\x7f\x02\x0c\x02\x7f\x00",
+        "N": b"\x7f\x04\x08\x10\x7f\x00",
+        "O": b"\x3e\x41\x41\x41\x3e\x00",
+        "P": b"\x7f\x09\x09\x09\x06\x00",
+        "Q": b"\x3e\x41\x51\x21\x5e\x00",
+        "R": b"\x7f\x09\x19\x29\x46\x00",
+        "S": b"\x26\x49\x49\x49\x32\x00",
+        "T": b"\x01\x01\x7f\x01\x01\x00",
+        "U": b"\x3f\x40\x40\x40\x3f\x00",
+        "V": b"\x1f\x20\x40\x20\x1f\x00",
+        "W": b"\x3f\x40\x38\x40\x3f\x00",
+        "X": b"\x63\x14\x08\x14\x63\x00",
+        "Y": b"\x07\x08\x70\x08\x07\x00",
+        "Z": b"\x61\x51\x49\x45\x43\x00",
+        "[": b"\x00\x7f\x41\x41\x00\x00",
+        "\\": b"\x02\x04\x08\x10\x20\x00",
+        "]": b"\x00\x41\x41\x7f\x00\x00",
+        "^": b"\x04\x02\x01\x02\x04\x00",
+        "_": b"\x40\x40\x40\x40\x40\x00",
+        "`": b"\x00\x03\x05\x00\x00\x00",
+        "a": b"\x20\x54\x54\x54\x78\x00",
+        "b": b"\x7f\x48\x44\x44\x38\x00",
+        "c": b"\x38\x44\x44\x44\x20\x00",
+        "d": b"\x38\x44\x44\x48\x7f\x00",
+        "e": b"\x38\x54\x54\x54\x18\x00",
+        "f": b"\x00\x04\x7e\x05\x01\x00",
+        "g": b"\x08\x54\x54\x54\x3c\x00",
+        "h": b"\x7f\x08\x04\x04\x78\x00",
+        "i": b"\x00\x44\x7d\x40\x00\x00",
+        "j": b"\x20\x40\x44\x3d\x00\x00",
+        "k": b"\x00\x7f\x10\x28\x44\x00",
+        "l": b"\x00\x41\x7f\x40\x00\x00",
+        "m": b"\x7c\x04\x78\x04\x78\x00",
+        "n": b"\x7c\x08\x04\x04\x78\x00",
+        "o": b"\x38\x44\x44\x44\x38\x00",
+        "p": b"\x7c\x14\x14\x14\x08\x00",
+        "q": b"\x08\x14\x14\x14\x7c\x00",
+        "r": b"\x7c\x08\x04\x04\x08\x00",
+        "s": b"\x48\x54\x54\x54\x24\x00",
+        "t": b"\x04\x3e\x44\x40\x20\x00",
+        "u": b"\x3c\x40\x40\x20\x7c\x00",
+        "v": b"\x0c\x30\x40\x30\x0c\x00",
+        "w": b"\x3c\x40\x30\x40\x3c\x00",
+        "x": b"\x44\x24\x38\x48\x44\x00",
+        "y": b"\x44\x48\x30\x10\x0c\x00",
+        "z": b"\x44\x64\x54\x4c\x44\x00",
+        "{": b"\x08\x36\x41\x00\x00\x00",
+        "|": b"\x00\x00\x77\x00\x00\x00",
+        "}": b"\x00\x00\x41\x36\x08\x00",
+        "~": b"\x02\x01\x02\x04\x02\x00",
+    }
+    return font
+
+
+def get_small_font_map_latin_extended() -> Dict[str, bytes]:
+    font = {
+        # U+0080..U+00FF Latin-1 Supplement
+        "¡": b"\x00\x00\x79\x00\x00\x00",
+        "¢": b"\x1c\x22\x7f\x22\x10\x00",
+        "£": b"\x50\x7e\x51\x41\x42\x00",
+        "¤": b"\x22\x1c\x14\x1c\x22\x00",
+        "¥": b"\x15\x16\x7c\x16\x15\x00",
+        "¦": b"\x00\x00\x77\x00\x00\x00",
+        "§": b"\x4a\x55\x55\x55\x29\x00",
+        "¨": b"\x00\x01\x00\x01\x00\x00",
+        "©": b"\x00\x18\x24\x24\x00\x00",
+        "«": b"\x08\x14\x00\x08\x14\x00",
+        "¬": b"\x08\x08\x08\x08\x38\x00",
+        "­": b"\x08\x08\x08\x08\x08\x00",
+        "¯": b"\x00\x01\x01\x01\x00\x00",
+        "°": b"\x00\x00\x07\x05\x07\x00",
+        "±": b"\x44\x44\x5f\x44\x44\x00",
+        "²": b"\x1d\x15\x17\x00\x00\x00",
+        "³": b"\x15\x15\x1f\x00\x00\x00",
+        "´": b"\x00\x04\x02\x01\x00\x00",
+        "µ": b"\x7c\x10\x10\x0c\x10\x00",
+        "¶": b"\x02\x07\x7f\x01\x7f\x00",
+        "·": b"\x00\x00\x08\x00\x00\x00",
+        "¸": b"\x00\x40\x60\x00\x00\x00",
+        "¹": b"\x12\x1f\x10\x00\x00\x00",
+        "º": b"\x07\x05\x07\x00\x00\x00",
+        "»": b"\x14\x08\x00\x14\x08\x00",
+        "¼": b"\x21\x17\x38\x24\x72\x00",
+        "½": b"\x21\x17\x78\x54\x5e\x00",
+        "¿": b"\x30\x48\x45\x40\x20\x00",
+        "À": b"\x78\x15\x16\x14\x78\x00",
+        "Á": b"\x78\x14\x16\x15\x78\x00",
+        "Â": b"\x78\x16\x15\x16\x78\x00",
+        "Ã": b"\x7a\x29\x2a\x79\x00\x00",
+        "Ä": b"\x78\x15\x14\x15\x78\x00",
+        "Å": b"\x78\x14\x15\x14\x78\x00",
+        "Æ": b"\x7e\x09\x7f\x49\x49\x00",
+        "Ç": b"\x0e\x51\x71\x11\x08\x00",
+        "È": b"\x7c\x55\x56\x44\x44\x00",
+        "É": b"\x7c\x54\x56\x45\x44\x00",
+        "Ê": b"\x7c\x56\x55\x46\x44\x00",
+        "Ë": b"\x7c\x55\x54\x45\x44\x00",
+        "Ì": b"\x00\x49\x7a\x48\x00\x00",
+        "Í": b"\x00\x48\x7a\x49\x00\x00",
+        "Î": b"\x00\x4a\x79\x4a\x00\x00",
+        "Ï": b"\x44\x45\x7c\x45\x44\x00",
+        "Ð": b"\x08\x7f\x49\x22\x1c\x00",
+        "Ñ": b"\x7a\x11\x22\x79\x00\x00",
+        "Ò": b"\x38\x45\x46\x44\x38\x00",
+        "Ó": b"\x38\x44\x46\x45\x38\x00",
+        "Ô": b"\x38\x46\x45\x46\x38\x00",
+        "Õ": b"\x32\x49\x4a\x31\x00\x00",
+        "Ö": b"\x38\x45\x44\x45\x38\x00",
+        "×": b"\x22\x14\x08\x14\x22\x00",
+        "Ø": b"\x58\x24\x54\x48\x34\x00",
+        "Ù": b"\x38\x41\x42\x40\x38\x00",
+        "Ú": b"\x38\x40\x42\x41\x38\x00",
+        "Û": b"\x38\x42\x41\x42\x38\x00",
+        "Ü": b"\x3c\x41\x40\x41\x3c\x00",
+        "Ý": b"\x04\x08\x72\x09\x04\x00",
+        "Þ": b"\x7f\x22\x22\x22\x1c\x00",
+        "ß": b"\x7e\x11\x25\x25\x1a\x00",
+        "à": b"\x20\x55\x56\x54\x78\x00",
+        "á": b"\x20\x54\x56\x55\x78\x00",
+        "â": b"\x20\x56\x55\x56\x78\x00",
+        "ã": b"\x22\x55\x56\x55\x78\x00",
+        "ä": b"\x20\x55\x54\x55\x78\x00",
+        "å": b"\x20\x54\x55\x54\x78\x00",
+        "æ": b"\x24\x54\x7c\x54\x48\x00",
+        "ç": b"\x1c\x22\x62\x22\x10\x00",
+        "è": b"\x38\x55\x56\x54\x08\x00",
+        "é": b"\x38\x54\x56\x55\x08\x00",
+        "ê": b"\x38\x56\x55\x56\x08\x00",
+        "ë": b"\x38\x55\x54\x55\x08\x00",
+        "ì": b"\x00\x45\x7e\x40\x00\x00",
+        "í": b"\x00\x44\x7e\x41\x00\x00",
+        "î": b"\x00\x46\x7d\x42\x00\x00",
+        "ï": b"\x00\x45\x7c\x41\x00\x00",
+        "ñ": b"\x78\x12\x09\x0a\x71\x00",
+        "ò": b"\x38\x45\x46\x44\x38\x00",
+        "ó": b"\x38\x44\x46\x45\x38\x00",
+        "ô": b"\x38\x46\x45\x46\x38\x00",
+        "õ": b"\x32\x49\x4a\x31\x00\x00",
+        "ö": b"\x38\x45\x44\x45\x38\x00",
+        "÷": b"\x08\x08\x2a\x08\x08\x00",
+        "ø": b"\x58\x24\x54\x48\x34\x00",
+        "ù": b"\x3c\x41\x42\x20\x7c\x00",
+        "ú": b"\x3c\x40\x42\x21\x7c\x00",
+        "û": b"\x3c\x42\x41\x22\x7c\x00",
+        "ü": b"\x3c\x41\x40\x21\x5c\x00",
+        "ű": b"\x3c\x41\x40\x21\x5c\x00",
+        "ų": b"\x3C\x40\x40\x20\xDC\x80",
+        "ý": b"\x44\x48\x32\x11\x0c\x00",
+        "þ": b"\x7c\x28\x28\x10\x00\x00",
+        "ÿ": b"\x44\x49\x30\x11\x0c\x00",
+        # U+0100..U+017F Latin Extended A
+        "Ā": b"\x78\x15\x15\x15\x78\x00",
+        "ā": b"\x20\x55\x55\x55\x78\x00",
+        "Ă": b"\x78\x15\x16\x15\x78\x00",
+        "ă": b"\x20\x55\x56\x55\x78\x00",
+        "Ą": b"\x7e\x09\x09\x49\xbe\x00",
+        "ą": b"\x20\x54\x54\xd4\x78\x00",
+        "Ć": b"\x38\x44\x46\x45\x28\x00",
+        "ć": b"\x38\x44\x46\x45\x20\x00",
+        "Ĉ": b"\x38\x46\x45\x46\x28\x00",
+        "ĉ": b"\x38\x46\x45\x46\x20\x00",
+        "Ċ": b"\x38\x44\x45\x44\x28\x00",
+        "ċ": b"\x38\x44\x45\x44\x20\x00",
+        "Č": b"\x38\x45\x46\x45\x28\x00",
+        "č": b"\x38\x45\x46\x45\x20\x00",
+        "Ď": b"\x7c\x45\x46\x29\x10\x00",
+        "ď": b"\x38\x44\x44\x4A\x7F\x00",
+        "Đ": b"\x08\x7f\x49\x22\x1c\x00",
+        "đ": b"\x38\x44\x44\x4A\x7F\x00",
+        "Ē": b"\x7c\x55\x55\x55\x44\x00",
+        "ē": b"\x38\x55\x55\x55\x08\x00",
+        "Ĕ": b"\x7c\x55\x56\x55\x44\x00",
+        "ĕ": b"\x38\x55\x56\x55\x08\x00",
+        "Ė": b"\x7c\x54\x55\x54\x44\x00",
+        "ė": b"\x38\x54\x55\x54\x08\x00",
+        "Ę": b"\x7f\x49\x49\xc9\x41\x00",
+        "ę": b"\x38\x54\x54\xd4\x18\x00",
+        "Ě": b"\x7c\x55\x56\x55\x44\x00",
+        "ě": b"\x38\x55\x56\x55\x08\x00",
+        "Ĝ": b"\x38\x46\x55\x56\x70\x00",
+        "ĝ": b"\x08\x56\x55\x56\x3c\x00",
+        "Ğ": b"\x38\x45\x56\x55\x30\x00",
+        "ğ": b"\x08\x55\x56\x55\x3c\x00",
+        "Ġ": b"\x38\x44\x55\x54\x30\x00",
+        "ġ": b"\x08\x54\x55\x54\x3c\x00",
+        "Ģ": b"\x0e\x51\x35\x15\x1c\x00",
+        "Ĥ": b"\x7c\x12\x11\x12\x7c\x00",
+        "ĥ": b"\x02\x79\x22\x10\x60\x00",
+        "Ħ": b"\x02\x7f\x0a\x7f\x02\x00",
+        "ħ": b"\x02\x7f\x12\x08\x70\x00",
+        "Ĩ": b"\x4a\x49\x7a\x49\x48\x00",
+        "ĩ": b"\x02\x49\x7a\x41\x00\x00",
+        "Ī": b"\x44\x45\x7d\x45\x44\x00",
+        "ī": b"\x00\x45\x7d\x41\x00\x00",
+        "Ĭ": b"\x44\x45\x7e\x45\x44\x00",
+        "ĭ": b"\x00\x45\x7e\x41\x00\x00",
+        "Į": b"\x00\x41\x7f\xc1\x00\x00",
+        "į": b"\x00\x44\x7d\xc0\x00\x00",
+        "İ": b"\x44\x44\x7d\x44\x44\x00",
+        "ı": b"\x00\x44\x7c\x40\x00\x00",
+        "ij": b"\x44\x7d\x40\x44\x3d\x00",
+        "Ĵ": b"\x20\x40\x46\x3d\x06\x00",
+        "ĵ": b"\x00\x20\x46\x3d\x02\x00",
+        "Ķ": b"\x1f\x44\x2a\x11\x00\x00",
+        "ķ": b"\x1f\x44\x2a\x11\x00\x00",
+        "ĸ": b"\x7c\x10\x28\x44\x00\x00",
+        "Ĺ": b"\x7c\x40\x42\x41\x40\x00",
+        "Ľ": b"\x7c\x40\x42\x41\x40\x00",
+        "ĺ": b"\x00\x44\x7e\x41\x00\x00",
+        "Ļ": b"\x1f\x50\x30\x10\x10\x00",
+        "ļ": b"\x00\x51\x3f\x10\x00\x00",
+        "ľ": b"\x00\x41\x7f\x40\x03\x00",
+        "Ŀ": b"\x7f\x40\x40\x48\x40\x00",
+        "ŀ": b"\x00\x41\x7f\x40\x08\x00",
+        "Ł": b"\x10\x7F\x48\x44\x40\x00",
+        "ł": b"\x00\x49\x7F\x44\x00\x00",
+        "Ń": b"\x7c\x08\x12\x21\x7c\x00",
+        "ń": b"\x7c\x08\x06\x05\x78\x00",
+        "Ņ": b"\x1f\x42\x24\x08\x1f\x00",
+        "ņ": b"\x1f\x42\x21\x01\x1e\x00",
+        "Ň": b"\x7c\x09\x12\x21\x7c\x00",
+        "ň": b"\x7c\x09\x06\x05\x78\x00",
+        "Ō": b"\x38\x45\x45\x45\x38\x00",
+        "ō": b"\x38\x45\x45\x45\x38\x00",
+        "Ŏ": b"\x38\x45\x46\x45\x38\x00",
+        "ŏ": b"\x38\x45\x46\x45\x38\x00",
+        "ő": b"\x38\x45\x44\x45\x38\x00",
+        "Œ": b"\x3e\x41\x7f\x49\x49\x00",
+        "œ": b"\x38\x44\x7c\x54\x58\x00",
+        "Ŕ": b"\x7c\x14\x16\x15\x68\x00",
+        "ŕ": b"\x7c\x08\x06\x05\x08\x00",
+        "Ŗ": b"\x1f\x45\x25\x05\x1a\x00",
+        "ŗ": b"\x1f\x42\x21\x01\x02\x00",
+        "Ř": b"\x7c\x15\x16\x15\x68\x00",
+        "ř": b"\x7c\x09\x06\x05\x08\x00",
+        "Ś": b"\x08\x54\x56\x55\x20\x00",
+        "ś": b"\x48\x54\x56\x55\x24\x00",
+        "Ŝ": b"\x08\x56\x55\x56\x20\x00",
+        "ŝ": b"\x48\x56\x55\x56\x24\x00",
+        "Ş": b"\x02\x55\x35\x15\x08\x00",
+        "ş": b"\x12\x55\x35\x15\x09\x00",
+        "Š": b"\x08\x55\x56\x55\x20\x00",
+        "š": b"\x48\x55\x56\x55\x24\x00",
+        "Ţ": b"\x01\x41\x3f\x01\x01\x00",
+        "ţ": b"\x02\x4f\x32\x10\x08\x00",
+        "Ť": b"\x04\x05\x7e\x05\x04\x00",
+        "ť": b"\x04\x3e\x44\x40\x23\x00",
+        "Ŧ": b"\x01\x09\x7f\x09\x01\x00",
+        "ŧ": b"\x14\x3e\x54\x40\x20\x00",
+        "Ū": b"\x3c\x41\x41\x41\x3c\x00",
+        "ū": b"\x3c\x41\x41\x21\x7c\x00",
+        "Ŭ": b"\x3c\x41\x42\x41\x3c\x00",
+        "ŭ": b"\x3c\x41\x41\x21\x7c\x00",
+        "Ů": b"\x3c\x40\x41\x40\x3c\x00",
+        "ů": b"\x3c\x41\x41\x21\x7c\x00",
+        "Ŵ": b"\x3c\x42\x39\x42\x3c\x00",
+        "ŵ": b"\x3c\x42\x31\x42\x3c\x00",
+        "Ŷ": b"\x04\x0a\x71\x0a\x04\x00",
+        "ŷ": b"\x04\x4a\x31\x12\x0c\x00",
+        "Ÿ": b"\x04\x09\x70\x09\x04\x00",
+        "Ź": b"\x44\x64\x56\x4d\x44\x00",
+        "ź": b"\x44\x64\x56\x4d\x44\x00",
+        "Ż": b"\x44\x64\x55\x4c\x44\x00",
+        "ż": b"\x44\x64\x55\x4c\x44\x00",
+        "Ž": b"\x44\x65\x56\x4d\x44\x00",
+        "ž": b"\x44\x65\x56\x4d\x44\x00",
+        "ſ": b"\x00\x04\x7e\x01\x01\x00",
+    }
+    return font
+
+
+def get_small_font_map_cyrillic() -> Dict[str, bytes]:
+    font = {
+        # U+0400..U+04FF Cyrillic
+        "Ѐ": b"\x7c\x55\x56\x44\x44\x00",
+        "Ё": b"\x7c\x55\x54\x45\x44\x00",
+        "Ђ": b"\x01\x7f\x09\x49\x31\x00",
+        "Ѓ": b"\x7c\x04\x06\x05\x04\x00",
+        "Є": b"\x3e\x49\x49\x41\x00\x00",
+        "Ѕ": b"\x06\x49\x49\x49\x30\x00",
+        "І": b"\x41\x41\x7f\x41\x41\x00",
+        "Ї": b"\x44\x45\x7c\x45\x44\x00",
+        "Ј": b"\x20\x40\x41\x3f\x01\x00",
+        "Љ": b"\x7f\x01\x7f\x48\x30\x00",
+        "Њ": b"\x7f\x08\x7f\x48\x30\x00",
+        "Ћ": b"\x01\x01\x7f\x09\x71\x00",
+        "Ќ": b"\x7c\x12\x29\x44\x00\x00",
+        "Ѝ": b"\x7c\x21\x12\x08\x7c\x00",
+        "Ў": b"\x44\x49\x32\x09\x04\x00",
+        "Џ": b"\x3f\x20\x60\x20\x3f\x00",
+        "А": b"\x7e\x09\x09\x09\x7e\x00",
+        "Б": b"\x7f\x49\x49\x49\x31\x00",
+        "В": b"\x7f\x49\x49\x49\x36\x00",
+        "Г": b"\x7f\x01\x01\x01\x01\x00",
+        "Ґ": b"\x7E\x02\x02\x02\x03\x00",
+        "Д": b"\x60\x3f\x21\x3f\x60\x00",
+        "Е": b"\x7f\x49\x49\x49\x41\x00",
+        "Ж": b"\x77\x08\x7f\x08\x77\x00",
+        "З": b"\x00\x41\x49\x49\x36\x00",
+        "И": b"\x7f\x10\x08\x04\x7f\x00",
+        "Й": b"\x7c\x21\x12\x09\x7c\x00",
+        "К": b"\x7f\x08\x14\x22\x41\x00",
+        "Л": b"\x40\x3f\x01\x01\x7f\x00",
+        "М": b"\x7f\x02\x04\x02\x7f\x00",
+        "Н": b"\x7f\x08\x08\x08\x7f\x00",
+        "О": b"\x3e\x41\x41\x41\x3e\x00",
+        "П": b"\x7f\x01\x01\x01\x7f\x00",
+        "Р": b"\x7f\x09\x09\x09\x06\x00",
+        "С": b"\x3e\x41\x41\x41\x22\x00",
+        "Т": b"\x01\x01\x7f\x01\x01\x00",
+        "У": b"\x47\x48\x30\x08\x07\x00",
+        "Ф": b"\x0c\x12\x7f\x12\x0c\x00",
+        "Х": b"\x63\x14\x08\x14\x63\x00",
+        "Ц": b"\x3f\x20\x20\x3f\x60\x00",
+        "Ч": b"\x07\x08\x08\x08\x7f\x00",
+        "Ш": b"\x7F\x40\x7F\x40\x7F\x00",
+        "Щ": b"\x7F\x40\x7F\x40\x7F\xC0",
+        "Ъ": b"\x01\x7f\x48\x48\x30\x00",
+        "Ы": b"\x7f\x48\x30\x00\x7f\x00",
+        "Ь": b"\x00\x7f\x48\x48\x30\x00",
+        "Э": b"\x22\x49\x49\x2a\x1c\x00",
+        "Ю": b"\x7f\x08\x3e\x41\x3e\x00",
+        "Я": b"\x46\x29\x19\x09\x7f\x00",
+        "а": b"\x20\x54\x54\x54\x78\x00",
+        "б": b"\x3c\x4a\x4a\x4a\x30\x00",
+        "в": b"\x7c\x54\x54\x54\x28\x00",
+        "г": b"\x7c\x04\x04\x04\x04\x00",
+        "ґ": b"\x7C\x04\x04\x04\x06\x00",
+        "д": b"\x40\x3c\x24\x3c\x60\x00",
+        "е": b"\x38\x54\x54\x54\x18\x00",
+        "ж": b"\x6c\x10\x7c\x10\x6c\x00",
+        "з": b"\x28\x44\x54\x54\x28\x00",
+        "и": b"\x7c\x20\x10\x08\x7c\x00",
+        "й": b"\x7c\x21\x12\x09\x7c\x00",
+        "к": b"\x7c\x10\x28\x44\x00\x00",
+        "л": b"\x40\x3c\x04\x04\x7c\x00",
+        "м": b"\x7c\x08\x10\x08\x7c\x00",
+        "н": b"\x7c\x10\x10\x10\x7c\x00",
+        "о": b"\x38\x44\x44\x44\x38\x00",
+        "п": b"\x7c\x04\x04\x04\x7c\x00",
+        "р": b"\x7c\x14\x14\x14\x08\x00",
+        "с": b"\x38\x44\x44\x44\x20\x00",
+        "т": b"\x04\x04\x7c\x04\x04\x00",
+        "у": b"\x4c\x50\x20\x10\x0c\x00",
+        "ф": b"\x18\x24\x7e\x24\x18\x00",
+        "х": b"\x44\x28\x10\x28\x44\x00",
+        "ц": b"\x3c\x20\x20\x3c\x60\x00",
+        "ч": b"\x0c\x10\x10\x10\x7c\x00",
+        "ш": b"\x7C\x40\x7C\x40\x7C\x00",
+        "щ": b"\x7C\x40\x7C\x40\xFC\x00",
+        "ъ": b"\x04\x7c\x50\x20\x00\x00",
+        "ы": b"\x7c\x50\x20\x00\x7c\x00",
+        "ь": b"\x00\x7c\x50\x20\x00\x00",
+        "э": b"\x28\x44\x54\x54\x28\x00",
+        "ю": b"\x7c\x10\x38\x44\x38\x00",
+        "я": b"\x48\x34\x14\x14\x7c\x00",
+        "ѐ": b"\x38\x55\x56\x54\x08\x00",
+        "ё": b"\x38\x55\x54\x55\x08\x00",
+        "ђ": b"\x02\x3f\x12\x48\x30\x00",
+        "ѓ": b"\x7c\x04\x06\x05\x04\x00",
+        "є": b"\x38\x54\x54\x44\x28\x00",
+        "ѕ": b"\x08\x54\x54\x54\x20\x00",
+        "і": b"\x00\x44\x7d\x40\x00\x00",
+        "ї": b"\x00\x45\x7c\x41\x00\x00",
+        "ј": b"\x20\x40\x44\x3d\x00\x00",
+        "љ": b"\x7c\x04\x7c\x50\x20\x00",
+        "њ": b"\x7c\x10\x7c\x50\x20\x00",
+        "ћ": b"\x04\x7e\x14\x10\x60\x00",
+        "ќ": b"\x7c\x12\x29\x44\x00\x00",
+        "ѝ": b"\x7c\x21\x12\x08\x7c\x00",
+        "ў": b"\x4c\x51\x22\x11\x0c\x00",
+        "џ": b"\x3c\x20\x60\x20\x3c\x00",
+    }
+    return font
+
+
+NAME_ASCII_BASIC: Final = "ascii_basic"
+NAME_LATIN_EXTENDED: Final = "latin_extended"
+NAME_CYRILLIC: Final = "cyrillic"
+NAME_CJK: Final = "cjk"
+
+
+def get_font_maps_for_name(
+    font_name: str,
+) -> Tuple[Dict[str, bytes], Dict[str, bytes]]:
+    if font_name == NAME_ASCII_BASIC:
+        return get_font_map_ascii_basic(), get_small_font_map_ascii_basic()
+    elif font_name == NAME_LATIN_EXTENDED:
+        return get_font_map_latin_extended(), get_small_font_map_latin_extended()
+    elif font_name == NAME_CYRILLIC:
+        return get_font_map_cyrillic(), get_small_font_map_cyrillic()
+    else:
+        raise ValueError("Invalid font name")

Translations/make_translation_test.py

@@ -0,0 +1,54 @@
+#!/usr/bin/env python3
+import json
+import os
+import unittest
+
+
+class TestMakeTranslation(unittest.TestCase):
+    def test_get_bytes_from_font_index(self):
+        from make_translation import get_bytes_from_font_index
+
+        self.assertEqual(get_bytes_from_font_index(2), b"\x02")
+        self.assertEqual(get_bytes_from_font_index(239), b"\xEF")
+        self.assertEqual(get_bytes_from_font_index(240), b"\xF0")
+        self.assertEqual(get_bytes_from_font_index(241), b"\xF1\x01")
+        self.assertEqual(get_bytes_from_font_index(495), b"\xF1\xFF")
+        self.assertEqual(get_bytes_from_font_index(496), b"\xF2\x01")
+        self.assertEqual(get_bytes_from_font_index(750), b"\xF2\xFF")
+        self.assertEqual(get_bytes_from_font_index(751), b"\xF3\x01")
+        self.assertEqual(get_bytes_from_font_index(0x10 * 0xFF - 15), b"\xFF\xFF")
+        with self.assertRaises(ValueError):
+            get_bytes_from_font_index(0x10 * 0xFF - 14)
+
+    def test_bytes_to_escaped(self):
+        from make_translation import bytes_to_escaped
+
+        self.assertEqual(bytes_to_escaped(b"\x00"), "\\x00")
+        self.assertEqual(bytes_to_escaped(b"\xF1\xAB"), "\\xF1\\xAB")
+
+    def test_bytes_to_c_hex(self):
+        from make_translation import bytes_to_c_hex
+
+        self.assertEqual(bytes_to_c_hex(b"\x00"), "0x00,")
+        self.assertEqual(bytes_to_c_hex(b"\xF1\xAB"), "0xF1, 0xAB,")
+
+    def test_no_language_id_collisions(self):
+        """
+        Asserting that we have no language collisions and that the has works ok
+        """
+        from make_translation import get_language_unqiue_id
+
+        seen_ids = []
+        for filename in os.listdir("."):
+            if filename.endswith(".json") and filename.startswith("translation_"):
+                with open(filename) as f:
+                    data = json.loads(f.read())
+                    lang_code = data.get("languageCode")
+                    self.assertNotEqual(lang_code, None)
+                    id = get_language_unqiue_id(lang_code)
+                    self.assertFalse(id in seen_ids)
+                    seen_ids.append(id)
+
+
+if __name__ == "__main__":
+    unittest.main()

Translations/objcopy.py

@@ -0,0 +1,25 @@
+import os
+import subprocess
+import tempfile
+
+
+if "OBJCOPY" in os.environ:
+    OBJCOPY = os.environ["OBJCOPY"]
+else:
+    OBJCOPY = "objcopy"
+
+
+def get_binary_from_obj(objfile_path: str, section_name: str) -> bytes:
+    tmpfd, tmpfile = tempfile.mkstemp()
+    result = subprocess.run(
+        [OBJCOPY, "-O", "binary", "-j", section_name, objfile_path, tmpfile]
+    )
+    result.check_returncode()
+    with open(tmpfd, "rb") as f:
+        bin: bytes = f.read()
+    os.remove(tmpfile)
+    return bin
+
+
+def cpp_var_to_section_name(var_name: str) -> str:
+    return f".rodata._ZL{len(var_name)}{var_name}"

Translations/translation_BG.json

@@ -0,0 +1,214 @@
+{
+  "languageCode": "BG",
+  "languageLocalName": "Български",
+  "fonts": ["ascii_basic", "cyrillic"],
+  "messages": {
+    "SettingsCalibrationDone": "Калибрацията завършена!",
+    "SettingsCalibrationWarning": "Уверете се, че върха на поялника е със стайна температура преди да продължите!",
+    "SettingsResetWarning": "Сигурни ли сте, че искате да върнете фабричните настройки?",
+    "UVLOWarningString": "Ниско DC Напрежение",
+    "UndervoltageString": "Ниско Напрежение",
+    "InputVoltageString": "Входно V: ",
+    "WarningTipTempString": "Темп.: ",
+    "BadTipString": "ЛОШ ВРЪХ",
+    "SleepingSimpleString": "Сън",
+    "SleepingAdvancedString": "Хър Хър Хър...",
+    "WarningSimpleString": "ОХ!",
+    "WarningAdvancedString": "ВНИМАНИЕ! ТОПЛО!",
+    "SleepingTipAdvancedString": "Връх:",
+    "IdleTipString": "Връх:",
+    "IdleSetString": " Настройка:",
+    "TipDisconnectedString": "ПРЕКЪСНАТ ВРЪХ",
+    "SolderingAdvancedPowerPrompt": "Захранване: ",
+    "OffString": "Изкл.",
+    "YourGainMessage": "Усилване:"
+  },
+  "messagesWarn": {
+    "ResetOKMessage": "Нулиране",
+    "SettingsResetMessage": ["Настройките бяха", "нулирани!"],
+    "NoAccelerometerMessage": ["No accelerometer", "detected!"],
+    "NoPowerDeliveryMessage": ["No USB-PD IC", "detected!"],
+    "LockingKeysString": " LOCKED",
+    "UnlockingKeysString": "UNLOCKED",
+    "WarningKeysLockedString": "!LOCKED!",
+    "WarningThermalRunaway": ["Thermal", "Runaway"]
+  },
+  "characters": {
+    "SettingRightChar": "R",
+    "SettingLeftChar": "L",
+    "SettingAutoChar": "A",
+    "SettingOffChar": "O",
+    "SettingSlowChar": "S",
+    "SettingMediumChar": "M",
+    "SettingFastChar": "F",
+    "SettingStartNoneChar": "И",
+    "SettingStartSolderingChar": "Р",
+    "SettingStartSleepChar": "С",
+    "SettingStartSleepOffChar": "П",
+    "SettingStartNoneChar": "F",
+    "SettingSensitivityOff": "O",
+    "SettingSensitivityLow": "L",
+    "SettingSensitivityMedium": "M",
+    "SettingSensitivityHigh": "H",
+    "SettingLockDisableChar": "D",
+    "SettingLockBoostChar": "B",
+    "SettingLockFullChar": "F",
+    "SettingNAChar": "N/A"
+  },
+  "menuGroups": {
+    "PowerMenu": {
+      "text2": ["Power", "settings"],
+      "desc": "Power settings"
+    },
+    "SolderingMenu": {
+      "text2": ["Поялник", "Настройки"],
+      "desc": "Настройки на поялника"
+    },
+    "PowerSavingMenu": {
+      "text2": ["Режими", "Настройки"],
+      "desc": "Настройки енергоспестяване"
+    },
+    "UIMenu": {
+      "text2": ["Интерфейс", "Настройки"],
+      "desc": "Настройки на интерфейса"
+    },
+    "AdvancedMenu": {
+      "text2": ["Разширени", "Настройки"],
+      "desc": "Допълнителни настройки"
+    }
+  },
+  "menuOptions": {
+    "DCInCutoff": {
+      "text2": ["Източник", "захранване"],
+      "desc": "Източник на захранване. Минимално напрежение. (DC 10V) (S 3,3V за клетка)"
+    },
+    "SleepTemperature": {
+      "text2": ["Темп.", "сън"],
+      "desc": "Температура при режим \"сън\" (C)"
+    },
+    "SleepTimeout": {
+      "text2": ["Време", "сън"],
+      "desc": "Включване в режим \"сън\" след: (Минути | Секунди)"
+    },
+    "ShutdownTimeout": {
+      "text2": ["Време", "изкл."],
+      "desc": "Изключване след (Минути)"
+    },
+    "MotionSensitivity": {
+      "text2": ["Усещане", "за движение"],
+      "desc": "Усещане за движение (0=Изключено | 1=Слабо | ... | 9=Силно)"
+    },
+    "TemperatureUnit": {
+      "text2": ["Единици за", "температура"],
+      "desc": "Единици за температура (C=Целзии | F=Фаренхайт)"
+    },
+    "AdvancedIdle": {
+      "text2": ["Детайлен", "екран в покой"],
+      "desc": "Покажи детайлна информация със ситен шрифт на екрана в режим на покой."
+    },
+    "DisplayRotation": {
+      "text2": ["Ориентация", "на дисплея"],
+      "desc": "Ориентация на дисплея (R=Дясна Ръка | L=Лява Ръка | A=Автоматично)"
+    },
+    "BoostTemperature": {
+      "text2": ["Турбо", "темп."],
+      "desc": "Температура за \"турбо\" режим"
+    },
+    "AutoStart": {
+      "text2": ["Автоматичен", "работен режим"],
+      "desc": "Режим на поялника при включване на захранването. (И=Изключен | Р=Работен | С=Сън | П=Сън температура помещение)"
+    },
+    "CooldownBlink": {
+      "text2": ["Мигай при", "топъл поялник"],
+      "desc": "След изключване от работен режим, индикатора за температура да мига докато човката на поялника все още е топла"
+    },
+    "TemperatureCalibration": {
+      "text2": ["Калибриране", "температура?"],
+      "desc": "Калибриране на температурата"
+    },
+    "SettingsReset": {
+      "text2": ["Фабрични", "настройки?"],
+      "desc": "Връщане на фабрични настройки"
+    },
+    "VoltageCalibration": {
+      "text2": ["Калибриране", "напрежение?"],
+      "desc": "Калибриране на входното напрежение. Задръжте бутонa за изход"
+    },
+    "AdvancedSoldering": {
+      "text2": ["Детайлен", "работен екран"],
+      "desc": "Детайлна информация в работен режим при запояване"
+    },
+    "ScrollingSpeed": {
+      "text2": ["Скорост", "на текста"],
+      "desc": "Скорост на движение на този текст"
+    },
+    "QCMaxVoltage": {
+      "text2": ["Мощност на", "захранване"],
+      "desc": "Мощност на избраното захранване"
+    },
+    "PDNegTimeout": {
+      "text2": ["PD", "timeout"],
+      "desc": "PD negotiation timeout in 100ms steps for compatibility with some QC chargers (0: disabled)"
+    },
+    "PowerLimit": {
+      "text2": ["Лимит на", "мощност"],
+      "desc": "Максимална мощност на поялника (Watt)"
+    },
+    "ReverseButtonTempChange": {
+      "text2": ["Размяна", "бутони +-?"],
+      "desc": "Обръщане на бутоните \"+\" и \"-\" за промяна на температурата на върха на поялника"
+    },
+    "TempChangeShortStep": {
+      "text2": ["Промяна T", "бързо?"],
+      "desc": "Промяна на температура при бързо натискане на бутон!"
+    },
+    "TempChangeLongStep": {
+      "text2": ["Промяна Т", "задържане?"],
+      "desc": "Промяна на температура при задържане на бутон!"
+    },
+    "PowerPulsePower": {
+      "text2": ["Захранващ", "импулс"],
+      "desc": "Поддържане на интензивност на захранващия импулс"
+    },
+    "HallEffSensitivity": {
+      "text2": ["Hall Eff", "Sensitivity"],
+      "desc": "Sensitivity of the Hall effect sensor in detecting sleep (O=Off | L=Low | M=Medium | H=High)"
+    },
+    "LockingMode": {
+      "text2": ["Allow buttons", "locking"],
+      "desc": "When soldering, long press on both buttons lock them (D=Disable | B=Boost only | F=Full locking)"
+    },
+    "MinVolCell": {
+      "text2": ["Minimum", "voltage"],
+      "desc": "Minimum allowed voltage per cell (3S: 3 - 3,7V | 4-6S: 2,4 - 3,7V)"
+    },
+    "AnimLoop": {
+      "text2": ["Anim.", "loop"],
+      "desc": "Loop icon animations in root menu"
+    },
+    "AnimSpeed": {
+      "text2": ["Anim.", "speed"],
+      "desc": "Speed of icon animations in menu (O=off | L=low | M=medium | H=high)"
+    },
+    "PowerPulseWait": {
+      "text2": ["Power pulse", "wait time"],
+      "desc": "Time to wait before triggering every keep-awake pulse (x 2,5с)"
+    },
+    "PowerPulseDuration": {
+      "text2": ["Power pulse", "duration"],
+      "desc": "Keep-awake-pulse duration (x 250мс)"
+    },
+    "LanguageSwitch": {
+      "text2": ["Език:", " BG   Български"],
+      "desc": ""
+    },
+    "Brightness": {
+      "text2": ["Screen", "Brightness"],
+      "desc": "Adjust the contrast/brightness of the OLED screen"
+    },
+    "ColourInversion": {
+      "text2": ["Screen", "Invert"],
+      "desc": "Invert the colours of the OLED screen"
+    }
+  }
+}

Translations/translation_CS.json

@@ -0,0 +1,213 @@
+{
+  "languageCode": "CS",
+  "languageLocalName": "Český",
+  "fonts": ["ascii_basic", "latin_extended"],
+  "messages": {
+    "SettingsCalibrationDone": "Kalibrace dokončena!",
+    "SettingsCalibrationWarning": "Ujistěte se, že hrot má pokojovou teplotu!",
+    "SettingsResetWarning": "Opravdu chcete resetovat zařízení do továrního nastavení?",
+    "UVLOWarningString": "Nízké DC",
+    "UndervoltageString": "! Nízké napětí !",
+    "InputVoltageString": "Napětí: ",
+    "WarningTipTempString": "Teplota: ",
+    "BadTipString": "ŠP. HROT",
+    "SleepingSimpleString": "Zzz ",
+    "SleepingAdvancedString": "Režim spánku...",
+    "WarningSimpleString": "PÁLÍ",
+    "WarningAdvancedString": "!! HORKÝ HROT !!",
+    "SleepingTipAdvancedString": "Hrot:",
+    "IdleTipString": "Hrot:",
+    "IdleSetString": " Cíl:",
+    "TipDisconnectedString": "HROT NEPŘIPOJEN",
+    "SolderingAdvancedPowerPrompt": "Ohřev: ",
+    "OffString": "Vyp",
+    "YourGainMessage": "Zisk:"
+  },
+  "messagesWarn": {
+    "ResetOKMessage": "Reset OK",
+    "SettingsResetMessage": ["Tov. nas. obnov.", ""],
+    "NoAccelerometerMessage": ["No accelerometer", "detected!"],
+    "NoPowerDeliveryMessage": ["No USB-PD IC", "detected!"],
+    "LockingKeysString": " LOCKED",
+    "UnlockingKeysString": "UNLOCKED",
+    "WarningKeysLockedString": "!LOCKED!",
+    "WarningThermalRunaway": ["Thermal", "Runaway"]
+  },
+  "characters": {
+    "SettingRightChar": "P",
+    "SettingLeftChar": "L",
+    "SettingAutoChar": "A",
+    "SettingOffChar": "O",
+    "SettingSlowChar": "P",
+    "SettingMediumChar": "M",
+    "SettingFastChar": "R",
+    "SettingStartNoneChar": "O",
+    "SettingStartSolderingChar": "P",
+    "SettingStartSleepChar": "S",
+    "SettingStartSleepOffChar": "M",
+    "SettingSensitivityOff": "O",
+    "SettingSensitivityLow": "L",
+    "SettingSensitivityMedium": "M",
+    "SettingSensitivityHigh": "H",
+    "SettingLockDisableChar": "D",
+    "SettingLockBoostChar": "B",
+    "SettingLockFullChar": "F",
+    "SettingNAChar": "N/A"
+  },
+  "menuGroups": {
+    "PowerMenu": {
+      "text2": ["Power", "settings"],
+      "desc": "Power settings"
+    },
+    "SolderingMenu": {
+      "text2": ["Pájecí", "nastavení"],
+      "desc": "Nastavení pájení (boost, auto start...)."
+    },
+    "PowerSavingMenu": {
+      "text2": ["Režim", "spánku"],
+      "desc": "Nastavení režimu spánku, automatického vypnutí..."
+    },
+    "UIMenu": {
+      "text2": ["Uživatelské", "rozhraní"],
+      "desc": "Nastavení uživatelského rozhraní."
+    },
+    "AdvancedMenu": {
+      "text2": ["Pokročilé", "volby"],
+      "desc": "Pokročilé volby (detailní obrazovky, kalibrace, tovární nastavení...)."
+    }
+  },
+  "menuOptions": {
+    "DCInCutoff": {
+      "text2": ["Zdroj", "napájení"],
+      "desc": "Při nižším napětí ukončí pájení (DC=10V | ?S=?x3,3V pro LiPo, LiIon...)."
+    },
+    "SleepTemperature": {
+      "text2": ["Teplota v", "r. spánku"],
+      "desc": "Teplota v režimu spánku."
+    },
+    "SleepTimeout": {
+      "text2": ["Čas do", "r. spánku"],
+      "desc": "Čas do režimu spánku (Minut | Sekund)."
+    },
+    "ShutdownTimeout": {
+      "text2": ["Čas do", "vypnutí"],
+      "desc": "Čas do automatického vypnutí (Minut)."
+    },
+    "MotionSensitivity": {
+      "text2": ["Citlivost", "det. pohybu"],
+      "desc": "Citlivost detekce pohybu (0=Vyp | 1=Min | ... | 9=Max)."
+    },
+    "TemperatureUnit": {
+      "text2": ["Jednotky", "teploty"],
+      "desc": "Jednotky měření teploty (C=Celsius | F=Fahrenheit)."
+    },
+    "AdvancedIdle": {
+      "text2": ["Podrobnosti", "na vých. obr."],
+      "desc": "Zobrazit podrobnosti na výchozí obrazovce?"
+    },
+    "DisplayRotation": {
+      "text2": ["Orientace", "obrazovky"],
+      "desc": "Orientace obrazovky (P=Pravák | L=Levák | A=Auto)."
+    },
+    "BoostTemperature": {
+      "text2": ["Teplota v", "r. boost"],
+      "desc": "Teplota v režimu boost."
+    },
+    "AutoStart": {
+      "text2": ["Automatický", "start"],
+      "desc": "Při startu ihned nahřát hrot? (O=Pryč | P=Pájení | S=Spát | M=Spát teplota místnosti)"
+    },
+    "CooldownBlink": {
+      "text2": ["Blikáni při", "chladnutí"],
+      "desc": "Blikání teploty při chladnutí, dokud je hrot horký?"
+    },
+    "TemperatureCalibration": {
+      "text2": ["Kalibrovat", "teplotu?"],
+      "desc": "Kalibrace měření teploty."
+    },
+    "SettingsReset": {
+      "text2": ["Tovární", "nastavení?"],
+      "desc": "Obnovení továrního nastavení."
+    },
+    "VoltageCalibration": {
+      "text2": ["Kalibrovat", "vstupní napětí?"],
+      "desc": "Kalibrace vstupního napětí. Tlačítky uprav, podržením potvrď."
+    },
+    "AdvancedSoldering": {
+      "text2": ["Podrobnosti", "při pájení"],
+      "desc": "Zobrazit podrobnosti při pájení?"
+    },
+    "ScrollingSpeed": {
+      "text2": ["Rychlost", "popisků"],
+      "desc": "Rychlost posuvu popisků podobných tomuto (P=Pomalu | R=Rychle)"
+    },
+    "QCMaxVoltage": {
+      "text2": ["Výkon", "ve wattech"],
+      "desc": "Výkon použítého napájecího adaptéru ve wattech."
+    },
+    "PDNegTimeout": {
+      "text2": ["PD", "timeout"],
+      "desc": "PD negotiation timeout in 100ms steps for compatibility with some QC chargers (0: disabled)"
+    },
+    "PowerLimit": {
+      "text2": ["Omezení", "Výkonu"],
+      "desc": "Maximální příkon (Watty)"
+    },
+    "ReverseButtonTempChange": {
+      "text2": ["Prohodit", "tl. +-?"],
+      "desc": "Prohodí tlačítka plus a minus pro změnu teploty hrotu."
+    },
+    "TempChangeShortStep": {
+      "text2": ["Krok teploty", "krátký?"],
+      "desc": "Velikost skoku při změně teploty krátkým stiskem tlačítka!"
+    },
+    "TempChangeLongStep": {
+      "text2": ["Krok teploty", "dlouhý?"],
+      "desc": "Velikost skoku při změně teploty dlouhým stiskem tlačítka!"
+    },
+    "PowerPulsePower": {
+      "text2": ["Intenzita", "Výkon. pulsu"],
+      "desc": "Puls pro udržení zařízení v chodu (kvůli power bankám)."
+    },
+    "HallEffSensitivity": {
+      "text2": ["Hall Eff", "Sensitivity"],
+      "desc": "Sensitivity of the Hall effect sensor in detecting sleep (O=Off | L=Low | M=Medium | H=High)"
+    },
+    "LockingMode": {
+      "text2": ["Allow buttons", "locking"],
+      "desc": "When soldering, long press on both buttons lock them (D=Disable | B=Boost only | F=Full locking)"
+    },
+    "MinVolCell": {
+      "text2": ["Minimum", "voltage"],
+      "desc": "Minimum allowed voltage per cell (3S: 3 - 3,7V | 4-6S: 2,4 - 3,7V)"
+    },
+    "AnimLoop": {
+      "text2": ["Anim.", "loop"],
+      "desc": "Loop icon animations in root menu"
+    },
+    "AnimSpeed": {
+      "text2": ["Anim.", "speed"],
+      "desc": "Speed of icon animations in menu (O=off | L=low | M=medium | H=high)"
+    },
+    "PowerPulseWait": {
+      "text2": ["Power pulse", "wait time"],
+      "desc": "Time to wait before triggering every keep-awake pulse (x 2,5s)"
+    },
+    "PowerPulseDuration": {
+      "text2": ["Power pulse", "duration"],
+      "desc": "Keep-awake-pulse duration (x 250ms)"
+    },
+    "LanguageSwitch": {
+      "text2": ["Řeč:", " CS       Český"],
+      "desc": ""
+    },
+    "Brightness": {
+      "text2": ["Screen", "Brightness"],
+      "desc": "Adjust the contrast/brightness of the OLED screen"
+    },
+    "ColourInversion": {
+      "text2": ["Screen", "Invert"],
+      "desc": "Invert the colours of the OLED screen"
+    }
+  }
+}

Translations/translation_DA.json

@@ -0,0 +1,213 @@
+{
+  "languageCode": "DA",
+  "languageLocalName": "Dansk",
+  "fonts": ["ascii_basic", "latin_extended"],
+  "messages": {
+    "SettingsCalibrationDone": "Calibration done!",
+    "SettingsCalibrationWarning": "Sørg for at loddespidsen er ved stuetemperatur, inden du fortsætter!",
+    "SettingsResetWarning": "Are you sure to reset settings to default values?",
+    "UVLOWarningString": "Lav Volt",
+    "UndervoltageString": "Undervoltage",
+    "InputVoltageString": "Input V: ",
+    "WarningTipTempString": "Tip Temp: ",
+    "BadTipString": "BAD TIP",
+    "SleepingSimpleString": "Zzzz",
+    "SleepingAdvancedString": "Dvale...",
+    "WarningSimpleString": "Varm",
+    "WarningAdvancedString": "VARM LODDESPIDS!",
+    "SleepingTipAdvancedString": "Tip:",
+    "IdleTipString": "Tip:",
+    "IdleSetString": " Set:",
+    "TipDisconnectedString": "TIP DISCONNECTED",
+    "SolderingAdvancedPowerPrompt": "Power: ",
+    "OffString": "Off",
+    "YourGainMessage": "Your gain:"
+  },
+  "messagesWarn": {
+    "ResetOKMessage": "Reset OK",
+    "SettingsResetMessage": ["Settings were", "reset!"],
+    "NoAccelerometerMessage": ["No accelerometer", "detected!"],
+    "NoPowerDeliveryMessage": ["No USB-PD IC", "detected!"],
+    "LockingKeysString": " LOCKED",
+    "UnlockingKeysString": "UNLOCKED",
+    "WarningKeysLockedString": "!LOCKED!",
+    "WarningThermalRunaway": ["Thermal", "Runaway"]
+  },
+  "characters": {
+    "SettingRightChar": "H",
+    "SettingLeftChar": "V",
+    "SettingAutoChar": "A",
+    "SettingOffChar": "O",
+    "SettingSlowChar": "S",
+    "SettingMediumChar": "M",
+    "SettingFastChar": "F",
+    "SettingStartNoneChar": "S",
+    "SettingStartSolderingChar": "L",
+    "SettingStartSleepChar": "D",
+    "SettingStartSleepOffChar": "R",
+    "SettingSensitivityOff": "O",
+    "SettingSensitivityLow": "L",
+    "SettingSensitivityMedium": "M",
+    "SettingSensitivityHigh": "H",
+    "SettingLockDisableChar": "D",
+    "SettingLockBoostChar": "B",
+    "SettingLockFullChar": "F",
+    "SettingNAChar": "N/A"
+  },
+  "menuGroups": {
+    "PowerMenu": {
+      "text2": ["Power", "settings"],
+      "desc": "Power settings"
+    },
+    "SolderingMenu": {
+      "text2": ["Soldering", "Settings"],
+      "desc": "Soldering settings"
+    },
+    "PowerSavingMenu": {
+      "text2": ["Sleep", "Modes"],
+      "desc": "Power Saving Settings"
+    },
+    "UIMenu": {
+      "text2": ["User", "Interface"],
+      "desc": "User Interface settings"
+    },
+    "AdvancedMenu": {
+      "text2": ["Advanced", "Options"],
+      "desc": "Advanced options"
+    }
+  },
+  "menuOptions": {
+    "DCInCutoff": {
+      "text2": ["Power", "source"],
+      "desc": "Strømforsyning. Indstil Cutoff Spændingen. (DC 10V) (S 3,3V per cell)"
+    },
+    "SleepTemperature": {
+      "text2": ["Sleep", "temp"],
+      "desc": "Dvale Temperatur (C)"
+    },
+    "SleepTimeout": {
+      "text2": ["Sleep", "timeout"],
+      "desc": "Dvale Timeout (Minutter | Sekunder)"
+    },
+    "ShutdownTimeout": {
+      "text2": ["Shutdown", "timeout"],
+      "desc": "sluknings Timeout (Minutter)"
+    },
+    "MotionSensitivity": {
+      "text2": ["Motion", "sensitivity"],
+      "desc": "Bevægelsesfølsomhed (0=Slukket | 1=Mindst følsom | ... | 9=Mest følsom)"
+    },
+    "TemperatureUnit": {
+      "text2": ["Temperature", "unit"],
+      "desc": "Temperatur Enhed (C=Celsius | F=Fahrenheit)"
+    },
+    "AdvancedIdle": {
+      "text2": ["Detailed", "idle screen"],
+      "desc": "Vis detialieret information med en mindre skriftstørrelse på standby skærmen."
+    },
+    "DisplayRotation": {
+      "text2": ["Display", "orientation"],
+      "desc": "Skærm Orientering (H=Højre Håndet | V=Venstre Håndet | A=Automatisk)"
+    },
+    "BoostTemperature": {
+      "text2": ["Boost", "temp"],
+      "desc": "Temperatur i \"boost\" mode"
+    },
+    "AutoStart": {
+      "text2": ["Auto", "start"],
+      "desc": "Start automatisk med lodning når strøm sættes til. (S=Slukket | L=Lodning | D=Dvale tilstand | R=Dvale tilstand rumtemperatur)"
+    },
+    "CooldownBlink": {
+      "text2": ["Cooldown", "blink"],
+      "desc": "Blink temperaturen på skærmen, mens spidsen stadig er varm."
+    },
+    "TemperatureCalibration": {
+      "text2": ["Calibrate", "temperature?"],
+      "desc": "kalibrere spids temperatur."
+    },
+    "SettingsReset": {
+      "text2": ["Factory", "Reset?"],
+      "desc": "Gendan alle indstillinger"
+    },
+    "VoltageCalibration": {
+      "text2": ["Calibrate", "input voltage?"],
+      "desc": "VIN kalibrering. Knapperne justere, Lang tryk for at gå ud"
+    },
+    "AdvancedSoldering": {
+      "text2": ["Detailed", "solder screen"],
+      "desc": "Vis detialieret information mens der loddes"
+    },
+    "ScrollingSpeed": {
+      "text2": ["Scrolling", "speed"],
+      "desc": "Speed this text scrolls past at"
+    },
+    "QCMaxVoltage": {
+      "text2": ["Power", "Wattage"],
+      "desc": "Power Wattage of the power adapter used"
+    },
+    "PDNegTimeout": {
+      "text2": ["PD", "timeout"],
+      "desc": "PD negotiation timeout in 100ms steps for compatibility with some QC chargers (0: disabled)"
+    },
+    "PowerLimit": {
+      "text2": ["Power", "Limit"],
+      "desc": "Maximum power the iron can use (Watts)"
+    },
+    "ReverseButtonTempChange": {
+      "text2": ["Key +-", "reverse?"],
+      "desc": "Reverse the tip temperature change buttons plus minus assignment."
+    },
+    "TempChangeShortStep": {
+      "text2": ["Temp change", "short?"],
+      "desc": "Temperature change steps on short button press!"
+    },
+    "TempChangeLongStep": {
+      "text2": ["Temp change", "long?"],
+      "desc": "Temperature change steps on long button press!"
+    },
+    "PowerPulsePower": {
+      "text2": ["Power", "Pulse W"],
+      "desc": "Keep awake pulse power intensity"
+    },
+    "HallEffSensitivity": {
+      "text2": ["Hall Eff", "Sensitivity"],
+      "desc": "Sensitivity of the Hall effect sensor in detecting sleep (O=Off | L=Low | M=Medium | H=High)"
+    },
+    "LockingMode": {
+      "text2": ["Allow buttons", "locking"],
+      "desc": "When soldering, long press on both buttons lock them (D=Disable | B=Boost only | F=Full locking)"
+    },
+    "MinVolCell": {
+      "text2": ["Minimum", "voltage"],
+      "desc": "Minimum allowed voltage per cell (3S: 3 - 3,7V | 4-6S: 2,4 - 3,7V)"
+    },
+    "AnimLoop": {
+      "text2": ["Anim.", "loop"],
+      "desc": "Loop icon animations in root menu"
+    },
+    "AnimSpeed": {
+      "text2": ["Anim.", "speed"],
+      "desc": "Speed of icon animations in menu (O=off | L=low | M=medium | H=high)"
+    },
+    "PowerPulseWait": {
+      "text2": ["Power pulse", "wait time"],
+      "desc": "Time to wait before triggering every keep-awake pulse (x 2,5s)"
+    },
+    "PowerPulseDuration": {
+      "text2": ["Power pulse", "duration"],
+      "desc": "Keep-awake-pulse duration (x 250ms)"
+    },
+    "LanguageSwitch": {
+      "text2": ["Sprog :", " DA       Dansk"],
+      "desc": ""
+    },
+    "Brightness": {
+      "text2": ["Screen", "Brightness"],
+      "desc": "Adjust the contrast/brightness of the OLED screen"
+    },
+    "ColourInversion": {
+      "text2": ["Screen", "Invert"],
+      "desc": "Invert the colours of the OLED screen"
+    }
+  }
+}

Translations/translation_DE.json

@@ -0,0 +1,208 @@
+{
+  "languageCode": "DE",
+  "languageLocalName": "Deutsch",
+  "fonts": ["ascii_basic", "latin_extended"],
+  "tempUnitFahrenheit": false,
+  "messages": {
+    "SettingsCalibrationWarning": "Vor dem Fortfahren muss die Lötspitze vollständig abgekühlt sein!",
+    "SettingsResetWarning": "Sicher, dass alle Werte zurückgesetzt werden sollen?",
+    "UVLOWarningString": "V niedr.",
+    "UndervoltageString": "Unterspannung",
+    "InputVoltageString": "V Eingang: ",
+    "SleepingSimpleString": "Zzzz",
+    "SleepingAdvancedString": "Ruhemodus...",
+    "SleepingTipAdvancedString": "Temp:",
+    "IdleTipString": "Ist:",
+    "IdleSetString": " Soll:",
+    "TipDisconnectedString": "Spitze fehlt",
+    "SolderingAdvancedPowerPrompt": "Leistung: ",
+    "OffString": "Aus"
+  },
+  "messagesWarn": {
+    "ResetOKMessage": "Reset OK",
+    "SettingsResetMessage": ["Einstellungen", "zurückgesetzt!"],
+    "NoAccelerometerMessage": ["Bewegungssensor", "nicht erkannt!"],
+    "NoPowerDeliveryMessage": ["USB-PD IC", "nicht erkannt!"],
+    "LockingKeysString": "GESPERRT",
+    "UnlockingKeysString": "ENTSPERRT",
+    "WarningKeysLockedString": "!GESPERRT!",
+    "WarningThermalRunaway": ["Thermal", "Runaway"]
+  },
+  "characters": {
+    "SettingRightChar": "R",
+    "SettingLeftChar": "L",
+    "SettingAutoChar": "A",
+    "SettingOffChar": "A",
+    "SettingSlowChar": "L",
+    "SettingMediumChar": "M",
+    "SettingFastChar": "S",
+    "SettingStartNoneChar": "A",
+    "SettingStartSolderingChar": "L",
+    "SettingStartSleepChar": "R",
+    "SettingStartSleepOffChar": "K",
+    "SettingSensitivityOff": "A",
+    "SettingSensitivityLow": "N",
+    "SettingSensitivityMedium": "M",
+    "SettingSensitivityHigh": "H",
+    "SettingLockDisableChar": "A",
+    "SettingLockBoostChar": "B",
+    "SettingLockFullChar": "V",
+    "SettingNAChar": "-"
+  },
+  "menuGroups": {
+    "PowerMenu": {
+      "text2": ["Energie-", "einstellungen"],
+      "desc": "Energieeinstellungen"
+    },
+    "SolderingMenu": {
+      "text2": ["Löt-", "einstellungen"],
+      "desc": "Löteinstellungen"
+    },
+    "PowerSavingMenu": {
+      "text2": ["Ruhe-", "modus"],
+      "desc": "Energiespareinstellungen"
+    },
+    "UIMenu": {
+      "text2": ["Anzeige-", "einstellungen"],
+      "desc": "Menüeinstellungen"
+    },
+    "AdvancedMenu": {
+      "text2": ["Erweiterte", "Einstellungen"],
+      "desc": "Erweiterte Einstellungen"
+    }
+  },
+  "menuOptions": {
+    "DCInCutoff": {
+      "text2": ["Spannungs-", "quelle"],
+      "desc": "Spannungsquelle (Abschaltspannung) (DC=10V | nS=n*3.3V für n LiIon-Zellen)"
+    },
+    "SleepTemperature": {
+      "text2": ["Ruhe-", "temperatur"],
+      "desc": "Ruhetemperatur der Spitze"
+    },
+    "SleepTimeout": {
+      "text2": ["Ruhever-", "zögerung"],
+      "desc": "Dauer vor Übergang in den Ruhemodus (S=Sekunden | M=Minuten)"
+    },
+    "ShutdownTimeout": {
+      "text2": ["Abschalt-", "verzög."],
+      "desc": "Dauer vor automatischer Abschaltung (M=Minuten)"
+    },
+    "MotionSensitivity": {
+      "text2": ["Bewegungs-", "empfindlichk."],
+      "desc": "0=aus | 1=minimal | ... | 9=maximal"
+    },
+    "TemperatureUnit": {
+      "text2": ["Temperatur-", "einheit"],
+      "desc": "C=Celsius | F=Fahrenheit"
+    },
+    "AdvancedIdle": {
+      "text2": ["Detaillierte", "Ruheansicht"],
+      "desc": "Detaillierte Anzeige im Ruhemodus"
+    },
+    "DisplayRotation": {
+      "text2": ["Anzeige-", "ausrichtung"],
+      "desc": "R=rechtshändig | L=linkshändig | A=automatisch"
+    },
+    "BoostTemperature": {
+      "text2": ["Boost-", "temperatur"],
+      "desc": "Temperatur der Lötspitze im Boostmodus"
+    },
+    "AutoStart": {
+      "text2": ["Start im", "Lötmodus"],
+      "desc": "Heizverhalten beim Einschalten der Spannungsversorgung (A=aus | L=Lötmodus | R=Ruhemodus | K=Ruhemodus mit kalter Spitze)"
+    },
+    "CooldownBlink": {
+      "text2": ["Abkühl-", "blinken"],
+      "desc": "Temperaturanzeige blinkt beim Abkühlen, solange Spitze heiß ist"
+    },
+    "TemperatureCalibration": {
+      "text2": ["Temperatur", "kalibrieren?"],
+      "desc": "Kalibrierung der Lötspitzentemperatur"
+    },
+    "SettingsReset": {
+      "text2": ["Einstellungen", "zurücksetzen?"],
+      "desc": "Werte auf Werkseinstellungen zurücksetzen"
+    },
+    "VoltageCalibration": {
+      "text2": ["Eingangsspannung", "kalibrieren?"],
+      "desc": "Kalibrierung der Eingangsspannung (Langer Tastendruck zum Verlassen)"
+    },
+    "AdvancedSoldering": {
+      "text2": ["Detaillierte", "Lötansicht"],
+      "desc": "Detaillierte Anzeige im Lötmodus"
+    },
+    "ScrollingSpeed": {
+      "text2": ["Scroll-", "geschw."],
+      "desc": "Scrollgeschwindigkeit der Erläuterungen (L=langsam | S=schnell)"
+    },
+    "QCMaxVoltage": {
+      "text2": ["Spannungs-", "maximum"],
+      "desc": "Maximal zulässige Spannung der verwendeten Spannungsversorgung (V=Volt)"
+    },
+    "PDNegTimeout": {
+      "text2": ["PD", "timeout"],
+      "desc": "PD Abfragedauer in 100ms Schritten (Kompatibilität mit best. QC-Ladegeräten)"
+    },
+    "PowerLimit": {
+      "text2": ["Leistungs-", "maximum"],
+      "desc": "Maximal zulässige Leistungsaufnahme des Lötkolbens (W=Watt)"
+    },
+    "ReverseButtonTempChange": {
+      "text2": ["+- Tasten", "umkehren?"],
+      "desc": "Tastenbelegung zur Temperaturänderung umkehren"
+    },
+    "TempChangeShortStep": {
+      "text2": ["Temp-Schritt", "Druck kurz"],
+      "desc": "Schrittweite für Temperaturwechsel bei kurzem Tastendruck"
+    },
+    "TempChangeLongStep": {
+      "text2": ["Temp-Schritt", "Druck lang"],
+      "desc": "Schrittweite für Temperaturwechsel bei langem Tastendruck"
+    },
+    "PowerPulsePower": {
+      "text2": ["Leistungs-", "impuls"],
+      "desc": "Powerbank mit einem Impuls wach halten (Watt)"
+    },
+    "HallEffSensitivity": {
+      "text2": ["Empfindlichkeit", "der Hall-Sonde"],
+      "desc": "Empfindlichkeit der Hall-Sonde beim Erkennen des Ruhemodus (A=aus | N=niedrig | M=mittel | H=hoch)"
+    },
+    "LockingMode": {
+      "text2": ["Tasten-", "sperre"],
+      "desc": "Langes drücken beider Tasten im Lötmodus sperrt diese (A=aus | B=nur Boost | V=vollständig)"
+    },
+    "MinVolCell": {
+      "text2": ["Minimale", "Spannung"],
+      "desc": "Minimal zulässige Spannung pro Zelle (3S: 3 - 3,7V | 4-6S: 2,4 - 3,7V)"
+    },
+    "AnimLoop": {
+      "text2": ["Anim.", "Schleife"],
+      "desc": "Icon-Animationen im Hauptmenü wiederholen"
+    },
+    "AnimSpeed": {
+      "text2": ["Anim.", "Geschw."],
+      "desc": "Geschwindigkeit der Icon-Animationen im Menü (A=aus | L=langsam | M=mittel | S=schnell)"
+    },
+    "PowerPulseWait": {
+      "text2": ["Impuls-", "verzögerung"],
+      "desc": "Dauer vor Abgabe von Wachhalteimpulsen (x 2,5s)"
+    },
+    "PowerPulseDuration": {
+      "text2": ["Impuls-", "dauer"],
+      "desc": "Dauer des Wachhalteimpulses (x 250ms)"
+    },
+    "LanguageSwitch": {
+      "text2": ["Sprache:", " DE     Deutsch"],
+      "desc": ""
+    },
+    "Brightness": {
+      "text2": ["Bildschirm-", "kontrast"],
+      "desc": "Verändert die Helligkeit des OLED-Displays"
+    },
+    "ColourInversion": {
+      "text2": ["Farben", "umkehren"],
+      "desc": "Invertiert die Farben des OLED-Displays"
+    }
+  }
+}

Translations/translation_EN.json

@@ -0,0 +1,208 @@
+{
+  "languageCode": "EN",
+  "languageLocalName": "English",
+  "fonts": ["ascii_basic"],
+  "tempUnitFahrenheit": true,
+  "messages": {
+    "SettingsCalibrationWarning": "Please ensure the tip is at room temperature, before proceeding!",
+    "SettingsResetWarning": "Sure you want to restore default settings?",
+    "UVLOWarningString": "DC LOW",
+    "UndervoltageString": "Undervoltage",
+    "InputVoltageString": "Input V: ",
+    "SleepingSimpleString": "Zzzz",
+    "SleepingAdvancedString": "Sleeping...",
+    "SleepingTipAdvancedString": "Tip:",
+    "IdleTipString": "Tip:",
+    "IdleSetString": " Set:",
+    "TipDisconnectedString": "NO TIP",
+    "SolderingAdvancedPowerPrompt": "Power: ",
+    "OffString": "Off"
+  },
+  "messagesWarn": {
+    "ResetOKMessage": "Reset OK",
+    "SettingsResetMessage": ["Some settings", "changed"],
+    "NoAccelerometerMessage": ["No accelerometer", "detected!"],
+    "NoPowerDeliveryMessage": ["No USB-PD IC", "detected!"],
+    "LockingKeysString": "LOCKED",
+    "UnlockingKeysString": "UNLOCKED",
+    "WarningKeysLockedString": "!LOCKED!",
+    "WarningThermalRunaway": ["Thermal", "Runaway"]
+  },
+  "characters": {
+    "SettingRightChar": "R",
+    "SettingLeftChar": "L",
+    "SettingAutoChar": "A",
+    "SettingOffChar": "O",
+    "SettingSlowChar": "S",
+    "SettingMediumChar": "M",
+    "SettingFastChar": "F",
+    "SettingStartNoneChar": "O",
+    "SettingStartSolderingChar": "S",
+    "SettingStartSleepChar": "Z",
+    "SettingStartSleepOffChar": "R",
+    "SettingSensitivityOff": "O",
+    "SettingSensitivityLow": "L",
+    "SettingSensitivityMedium": "M",
+    "SettingSensitivityHigh": "H",
+    "SettingLockDisableChar": "D",
+    "SettingLockBoostChar": "B",
+    "SettingLockFullChar": "F",
+    "SettingNAChar": "N/A"
+  },
+  "menuGroups": {
+    "PowerMenu": {
+      "text2": ["Power", "settings"],
+      "desc": "Power settings"
+    },
+    "SolderingMenu": {
+      "text2": ["Soldering", "settings"],
+      "desc": "Soldering settings"
+    },
+    "PowerSavingMenu": {
+      "text2": ["Sleep", "mode"],
+      "desc": "Power saving settings"
+    },
+    "UIMenu": {
+      "text2": ["User", "interface"],
+      "desc": "User interface settings"
+    },
+    "AdvancedMenu": {
+      "text2": ["Advanced", "settings"],
+      "desc": "Advanced settings"
+    }
+  },
+  "menuOptions": {
+    "DCInCutoff": {
+      "text2": ["Power", "source"],
+      "desc": "Power source. Sets cutoff voltage. (DC 10V) (S 3.3V per cell, disable power limit)"
+    },
+    "SleepTemperature": {
+      "text2": ["Sleep", "temp"],
+      "desc": "Tip temperature while in \"sleep mode\""
+    },
+    "SleepTimeout": {
+      "text2": ["Sleep", "timeout"],
+      "desc": "Interval before \"sleep mode\" kicks in (S=seconds | M=minutes)"
+    },
+    "ShutdownTimeout": {
+      "text2": ["Shutdown", "timeout"],
+      "desc": "Interval before the iron shuts down (M=minutes)"
+    },
+    "MotionSensitivity": {
+      "text2": ["Motion", "sensitivity"],
+      "desc": "0=off | 1=least sensitive | ... | 9=most sensitive"
+    },
+    "TemperatureUnit": {
+      "text2": ["Temperature", "unit"],
+      "desc": "C=Celsius | F=Fahrenheit"
+    },
+    "AdvancedIdle": {
+      "text2": ["Detailed", "idle screen"],
+      "desc": "Display detailed information in a smaller font on the idle screen"
+    },
+    "DisplayRotation": {
+      "text2": ["Display", "orientation"],
+      "desc": "R=right-handed | L=left-handed | A=automatic"
+    },
+    "BoostTemperature": {
+      "text2": ["Boost", "temp"],
+      "desc": "Temperature used in \"boost mode\""
+    },
+    "AutoStart": {
+      "text2": ["Heat", "on power up"],
+      "desc": "O=off | S=soldering temp | Z=standby at sleep temp until moved | R=standby without heating until moved"
+    },
+    "CooldownBlink": {
+      "text2": ["Cooldown", "blink"],
+      "desc": "Flash the temperature reading after heating was halted while the tip is still hot"
+    },
+    "TemperatureCalibration": {
+      "text2": ["Calibrate", "temperature?"],
+      "desc": "Start tip temperature offset calibration"
+    },
+    "SettingsReset": {
+      "text2": ["Factory", "reset?"],
+      "desc": "Reset settings to default"
+    },
+    "VoltageCalibration": {
+      "text2": ["Calibrate", "input voltage?"],
+      "desc": "Start VIN calibration (long press to exit)"
+    },
+    "AdvancedSoldering": {
+      "text2": ["Detailed", "solder screen"],
+      "desc": "Display detailed information in a smaller font on soldering screen"
+    },
+    "ScrollingSpeed": {
+      "text2": ["Scrolling", "speed"],
+      "desc": "Speed info text scrolls past at (S=slow | F=fast)"
+    },
+    "QCMaxVoltage": {
+      "text2": ["QC", "voltage"],
+      "desc": "Max QC voltage the iron should negotiate for"
+    },
+    "PDNegTimeout": {
+      "text2": ["PD", "timeout"],
+      "desc": "PD negotiation timeout in 100ms steps for compatibility with some QC chargers"
+    },
+    "PowerLimit": {
+      "text2": ["Power", "limit"],
+      "desc": "Maximum power the iron can use (W=watt)"
+    },
+    "ReverseButtonTempChange": {
+      "text2": ["Reverse", "+ - keys"],
+      "desc": "Reverse assignment of buttons for temperature adjustment"
+    },
+    "TempChangeShortStep": {
+      "text2": ["Temp change", "short"],
+      "desc": "Temperature-change-increment on short button press"
+    },
+    "TempChangeLongStep": {
+      "text2": ["Temp change", "long"],
+      "desc": "Temperature-change-increment on long button press"
+    },
+    "PowerPulsePower": {
+      "text2": ["Power", "pulse"],
+      "desc": "Intensity of power of keep-awake-pulse (watt)"
+    },
+    "HallEffSensitivity": {
+      "text2": ["Hall sensor", "sensitivity"],
+      "desc": "Sensitivity of the Hall effect sensor to detect sleep (O=off | L=low | M=medium | H=high)"
+    },
+    "LockingMode": {
+      "text2": ["Allow locking", "buttons"],
+      "desc": "While soldering, hold down both buttons to toggle locking them (D=disable | B=boost mode only | F=full locking)"
+    },
+    "MinVolCell": {
+      "text2": ["Minimum", "voltage"],
+      "desc": "Minimum allowed voltage per cell (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)"
+    },
+    "AnimLoop": {
+      "text2": ["Anim.", "loop"],
+      "desc": "Loop icon animations in main menu"
+    },
+    "AnimSpeed": {
+      "text2": ["Anim.", "speed"],
+      "desc": "Pace of icon animations in menu (O=off | S=slow | M=medium | F=fast)"
+    },
+    "PowerPulseWait": {
+      "text2": ["Power pulse", "delay"],
+      "desc": "Delay before keep-awake-pulse is triggered (x 2.5s)"
+    },
+    "PowerPulseDuration": {
+      "text2": ["Power pulse", "duration"],
+      "desc": "Keep-awake-pulse duration (x 250ms)"
+    },
+    "LanguageSwitch": {
+      "text2": ["Language:", " EN     English"],
+      "desc": "Current firmware language"
+    },
+    "Brightness": {
+      "text2": ["Screen", "contrast"],
+      "desc": "Adjust the brightness of the OLED screen"
+    },
+    "ColourInversion": {
+      "text2": ["Invert", "screen"],
+      "desc": "Invert the colours of the OLED screen"
+    }
+  }
+}

Translations/translation_ES.json

@@ -0,0 +1,214 @@
+{
+  "languageCode": "ES",
+  "languageLocalName": "Castellano",
+  "fonts": ["ascii_basic", "latin_extended"],
+  "messages": {
+    "SettingsCalibrationDone": "¡Calibrada!",
+    "SettingsCalibrationWarning": "¡Asegúrate que la punta esté a temperatura ambiente antes de empezar!",
+    "SettingsResetWarning": "¿Quieres restablecer los ajustes?",
+    "UVLOWarningString": "CC BAJA",
+    "UndervoltageString": "Voltaje bajo",
+    "InputVoltageString": "Voltaje: ",
+    "WarningTipTempString": "Temp punta: ",
+    "BadTipString": "PT. ROTA",
+    "SleepingSimpleString": "Zzzz",
+    "SleepingAdvancedString": "En reposo...",
+    "WarningSimpleString": "QUEMA",
+    "WarningAdvancedString": "¡LA PUNTA QUEMA!",
+    "SleepingTipAdvancedString": "Punta:",
+    "IdleTipString": "Punta:",
+    "IdleSetString": " Aj:",
+    "TipDisconnectedString": "NO HAY PUNTA",
+    "SolderingAdvancedPowerPrompt": "Potencia: ",
+    "OffString": " No",
+    "YourGainMessage": "Gananc.:",
+    "SettingsResetMessage": "Ajustes borrados"
+  },
+  "messagesWarn": {
+    "ResetOKMessage": "Hecho.",
+    "SettingsResetMessage": ["Los ajustes fueron", "¡Reinicio!"],
+    "NoAccelerometerMessage": ["Sin acelerómetro", "¡Detectado!"],
+    "NoPowerDeliveryMessage": ["Sin USB-PD IC", "¡Detectado!"],
+    "LockingKeysString": " BLOQUEADO",
+    "UnlockingKeysString": "DESBLOQUEADO",
+    "WarningKeysLockedString": "¡BLOQUEADO!",
+    "WarningThermalRunaway": ["Thermal", "Runaway"]
+  },
+  "characters": {
+    "SettingRightChar": "D",
+    "SettingLeftChar": "I",
+    "SettingAutoChar": "A",
+    "SettingOffChar": "O",
+    "SettingSlowChar": "L",
+    "SettingMediumChar": "M",
+    "SettingFastChar": "R",
+    "SettingStartNoneChar": "N",
+    "SettingStartSolderingChar": "S",
+    "SettingStartSleepChar": "R",
+    "SettingStartSleepOffChar": "F",
+    "SettingSensitivityOff": "O",
+    "SettingSensitivityLow": "L",
+    "SettingSensitivityMedium": "M",
+    "SettingSensitivityHigh": "H",
+    "SettingLockDisableChar": "D",
+    "SettingLockBoostChar": "B",
+    "SettingLockFullChar": "F",
+    "SettingNAChar": "N/A"
+  },
+  "menuGroups": {
+    "PowerMenu": {
+      "text2": ["Potencia", "ajustes"],
+      "desc": "Ajustes de potencia"
+    },
+    "SolderingMenu": {
+      "text2": ["Ajustes de", "soldadura"],
+      "desc": "Ajustes para soldar."
+    },
+    "PowerSavingMenu": {
+      "text2": ["Modos de", "reposo"],
+      "desc": "Ajustes de ahorro energético."
+    },
+    "UIMenu": {
+      "text2": ["Interfaz", "de usuario"],
+      "desc": "Ajustes de interfaz de usuario."
+    },
+    "AdvancedMenu": {
+      "text2": ["Ajustes", "avanzados"],
+      "desc": "Ajustes avanzados."
+    }
+  },
+  "menuOptions": {
+    "DCInCutoff": {
+      "text2": ["Fuente", "de energía"],
+      "desc": "Elige el tipo de fuente para limitar el voltaje (DC 10V) (S 3,3V por pila, ilimitado)"
+    },
+    "SleepTemperature": {
+      "text2": ["Temperatura", "en reposo"],
+      "desc": "Temperatura de la punta en reposo."
+    },
+    "SleepTimeout": {
+      "text2": ["Entrar", "en reposo"],
+      "desc": "Tiempo de inactividad para entrar en reposo (min | seg)"
+    },
+    "ShutdownTimeout": {
+      "text2": ["Tiempo de", "apagado"],
+      "desc": "Tiempo de inactividad para apagarse (en minutos)"
+    },
+    "MotionSensitivity": {
+      "text2": ["Detección de", "movimiento"],
+      "desc": "Tiempo de reacción al agarrar (0=no | 1=menos sensible | ... | 9=más sensible)"
+    },
+    "TemperatureUnit": {
+      "text2": ["Unidad de", "temperatura"],
+      "desc": "Unidad de temperatura (C=centígrados | F=Fahrenheit)"
+    },
+    "AdvancedIdle": {
+      "text2": ["Info extra en", "modo reposo"],
+      "desc": "Muestra información detallada en letra pequeña al reposar."
+    },
+    "DisplayRotation": {
+      "text2": ["Orientación", "de pantalla"],
+      "desc": "Orientación de la pantalla (D=diestro | I=zurdo | A=automático)"
+    },
+    "BoostTemperature": {
+      "text2": ["Ajustar la", "temp. extra"],
+      "desc": "Temperatura momentánea que se alcanza al apretar el botón del modo extra."
+    },
+    "AutoStart": {
+      "text2": ["Calentar", "al enchufar"],
+      "desc": "Se calienta él solo al arrancar (N=no | S=entrar en modo soldar | R=solo entrar en reposo | F=en reposo pero mantiene la punta fría)"
+    },
+    "CooldownBlink": {
+      "text2": ["Parpadear", "al enfriar"],
+      "desc": "La temperatura en pantalla parpadea mientras la punta siga caliente."
+    },
+    "TemperatureCalibration": {
+      "text2": ["Calibrar temp.", "de la punta"],
+      "desc": "Calibra la desviación térmica de la punta."
+    },
+    "SettingsReset": {
+      "text2": ["Volver a ajustes", "de fábrica"],
+      "desc": "Restablece todos los ajustes a los valores originales."
+    },
+    "VoltageCalibration": {
+      "text2": ["Calibrar voltaje", "de entrada"],
+      "desc": "Calibra VIN. Ajusta con ambos botones y mantén pulsado para salir."
+    },
+    "AdvancedSoldering": {
+      "text2": ["Info extra", "al soldar"],
+      "desc": "Muestra más datos por pantalla cuando se está soldando."
+    },
+    "ScrollingSpeed": {
+      "text2": ["Velocidad", "del texto"],
+      "desc": "Velocidad de desplazamiento del texto (R=rápida | L=lenta)"
+    },
+    "QCMaxVoltage": {
+      "text2": ["Potencia de", "entrada"],
+      "desc": "Potencia en vatios del adaptador de corriente utilizado."
+    },
+    "PDNegTimeout": {
+      "text2": ["PD", "timeout"],
+      "desc": "PD negotiation timeout in 100ms steps for compatibility with some QC chargers (0: disabled)"
+    },
+    "PowerLimit": {
+      "text2": ["Ajustar la", "potenc. máx."],
+      "desc": "Elige el límite de potencia máxima del soldador (en vatios)"
+    },
+    "ReverseButtonTempChange": {
+      "text2": ["Invertir", "botones +/-"],
+      "desc": "Intercambia las funciones de subir y bajar la temperatura de los botones +/- para que funcionen al revés."
+    },
+    "TempChangeShortStep": {
+      "text2": ["Cambio temp.", "puls. cortas"],
+      "desc": "Subir y bajar X grados de temperatura con cada pulsación corta de los botones +/-."
+    },
+    "TempChangeLongStep": {
+      "text2": ["Cambio temp.", "puls. largas"],
+      "desc": "Subir y bajar X grados de temperatura con cada pulsación larga de los botones +/-."
+    },
+    "PowerPulsePower": {
+      "text2": ["Pulsos bat.", "constantes"],
+      "desc": "Aplica unos pulsos necesarios para mantener encendidas ciertas baterías portátiles. En vatios."
+    },
+    "HallEffSensitivity": {
+      "text2": ["Hall Eff", "Sensibilidad"],
+      "desc": "Sensibilidad del sensor de efecto Hall en la detección de reposo (O=Off | L=Low | M=Medium | H=High)"
+    },
+    "LockingMode": {
+      "text2": ["Permitir botones", "bloqueo"],
+      "desc": "Al soldar, una pulsación larga en ambos botones los bloquea (D=desactivar | B=sólo potenciar | F=bloqueo total)."
+    },
+    "MinVolCell": {
+      "text2": ["Mínimo", "voltaje"],
+      "desc": "voltaje mínimo permitido por célula (3S: 3 - 3,7V | 4-6S: 2,4 - 3,7V)"
+    },
+    "AnimLoop": {
+      "text2": ["Anim.", "bucle"],
+      "desc": "Animaciones de iconos en bucle en el menú raíz"
+    },
+    "AnimSpeed": {
+      "text2": ["Anim.", "velocidad"],
+      "desc": "Velocidad de las animaciones de los iconos en el menú (O=off | L=low | M=medium | H=high)"
+    },
+    "PowerPulseWait": {
+      "text2": ["Impulso de potencia", "tiempo de espera"],
+      "desc": "Tiempo de espera antes de disparar cada pulso de mantenimiento de la vigilia (x 2,5s)"
+    },
+    "PowerPulseDuration": {
+      "text2": ["Impulso de potencia", "duración"],
+      "desc": "Duración del impulso de mantenimiento de la vigilia (x 250ms)"
+    },
+    "LanguageSwitch": {
+      "text2": ["Language:", " ES  Castellano"],
+      "desc": ""
+    },
+    "Brightness": {
+      "text2": ["Screen", "Brightness"],
+      "desc": "Adjust the contrast/brightness of the OLED screen"
+    },
+    "ColourInversion": {
+      "text2": ["Screen", "Invert"],
+      "desc": "Invert the colours of the OLED screen"
+    }
+  }
+}

Translations/translation_FI.json

@@ -0,0 +1,212 @@
+{
+  "languageCode": "FI",
+  "languageLocalName": "Suomi",
+  "fonts": ["ascii_basic", "latin_extended"],
+  "messages": {
+    "SettingsCalibrationDone": "Kalibrointi tehty!",
+    "SettingsCalibrationWarning": "Varmista että kärki on huoneenlämpöinen ennen jatkamista!",
+    "SettingsResetWarning": "Haluatko varmasti palauttaa oletusarvot?",
+    "UVLOWarningString": "DC ALH.",
+    "UndervoltageString": "Alijännite",
+    "InputVoltageString": "Jännite: ",
+    "WarningTipTempString": "Kärjet lämpö: ",
+    "BadTipString": "PAHA KÄRJET",
+    "SleepingSimpleString": "Zzzz",
+    "SleepingAdvancedString": "Lepotila...",
+    "WarningSimpleString": "KUUMA!",
+    "WarningAdvancedString": "!!! KUUMA KÄRJET !!!",
+    "SleepingTipAdvancedString": "Kärki:",
+    "IdleTipString": "Pää:",
+    "IdleSetString": "Aseta:",
+    "TipDisconnectedString": "KÄRKI PUUTTUU",
+    "SolderingAdvancedPowerPrompt": "Teho: ",
+    "OffString": "Off"
+  },
+  "messagesWarn": {
+    "ResetOKMessage": "Palautus",
+    "SettingsResetMessage": ["Asetukset", "palautettu!"],
+    "NoAccelerometerMessage": ["Kiihtyvyysanturi", "puuttuu!"],
+    "NoPowerDeliveryMessage": ["USB-PD IC", "puuttuu!"],
+    "LockingKeysString": " LUKITTU",
+    "UnlockingKeysString": "AUKI",
+    "WarningKeysLockedString": "!LUKKO!",
+    "WarningThermalRunaway": ["Thermal", "Runaway"]
+  },
+  "characters": {
+    "SettingRightChar": "O",
+    "SettingLeftChar": "V",
+    "SettingAutoChar": "A",
+    "SettingOffChar": "P",
+    "SettingSlowChar": "H",
+    "SettingMediumChar": "M",
+    "SettingFastChar": "N",
+    "SettingStartNoneChar": "E",
+    "SettingStartSolderingChar": "J",
+    "SettingStartSleepChar": "L",
+    "SettingStartSleepOffChar": "H",
+    "SettingSensitivityOff": "P",
+    "SettingSensitivityLow": "A",
+    "SettingSensitivityMedium": "K",
+    "SettingSensitivityHigh": "S",
+    "SettingLockDisableChar": "P",
+    "SettingLockBoostChar": "V",
+    "SettingLockFullChar": "K",
+    "SettingNAChar": "N/A"
+  },
+  "menuGroups": {
+    "PowerMenu": {
+      "text2": ["Virta-", "asetukset"],
+      "desc": "Virta-asetukset"
+    },
+    "SolderingMenu": {
+      "text2": ["Juotos-", "asetukset"],
+      "desc": "Juotosasetukset"
+    },
+    "PowerSavingMenu": {
+      "text2": ["Lepotilan", "asetukset"],
+      "desc": "Virransäästöasetukset"
+    },
+    "UIMenu": {
+      "text2": ["Käyttö-", "liittymä"],
+      "desc": "Käyttöliittymän asetukset"
+    },
+    "AdvancedMenu": {
+      "text2": ["Lisä-", "asetukset"],
+      "desc": "Lisäasetukset"
+    }
+  },
+  "menuOptions": {
+    "DCInCutoff": {
+      "text2": ["Virtalähde", "DC"],
+      "desc": "Virtalähde. Asettaa katkaisujännitteen. (DC 10V) (S 3.3V per kenno, poistaa virtarajoitukset)"
+    },
+    "SleepTemperature": {
+      "text2": ["Lepotilan", "lämpötila"],
+      "desc": "Kärjen lämpötila \"lepotilassa\""
+    },
+    "SleepTimeout": {
+      "text2": ["Lepotilan", "viive"],
+      "desc": "\"Lepotilan\" ajastus (S=sekuntia | M=minuuttia)"
+    },
+    "ShutdownTimeout": {
+      "text2": ["Sammutus", "viive"],
+      "desc": "Automaattisen sammutuksen ajastus (M=minuuttia)"
+    },
+    "MotionSensitivity": {
+      "text2": ["Liikkeen", "herkkyys"],
+      "desc": "0=pois päältä | 1=vähäinen herkkyys | ... | 9=suurin herkkyys"
+    },
+    "TemperatureUnit": {
+      "text2": ["Lämpötilan", "yksikkö"],
+      "desc": "C=celsius, F=fahrenheit"
+    },
+    "AdvancedIdle": {
+      "text2": ["Tiedot", "lepotilassa"],
+      "desc": "Näyttää yksityiskohtaisemmat pienemmällä fontilla tiedot lepotilassa."
+    },
+    "DisplayRotation": {
+      "text2": ["Näytön", "kierto"],
+      "desc": "O=oikeakätinen | V=vasenkätinen | A=automaattinen"
+    },
+    "BoostTemperature": {
+      "text2": ["Tehostus-", "lämpötila"],
+      "desc": "Tehostustilan lämpötila"
+    },
+    "AutoStart": {
+      "text2": ["Autom.", "käynnistys"],
+      "desc": "Käynnistää virrat kytkettäessä juotostilan automaattisesti. (E=Ei käytössä | J=juotostila | L=Lepotila | H=Lepotila huoneenlämpö)"
+    },
+    "CooldownBlink": {
+      "text2": ["Jäähdytyksen", "vilkutus"],
+      "desc": "Vilkuttaa jäähtyessä juotoskärjen lämpötilaa sen ollessa vielä vaarallisen kuuma"
+    },
+    "TemperatureCalibration": {
+      "text2": ["Kalibroi", "lämpötila?"],
+      "desc": "Kalibroi kärjen lämpötilaeron"
+    },
+    "SettingsReset": {
+      "text2": ["Palauta", "tehdasasetukset?"],
+      "desc": "Palauta kaikki asetukset oletusarvoihin"
+    },
+    "VoltageCalibration": {
+      "text2": ["Kalibroi", "tulojännite?"],
+      "desc": "Tulojännitten kalibrointi (VIN) (paina pitkään poistuaksesi)"
+    },
+    "AdvancedSoldering": {
+      "text2": ["Tarkempi", "juotosnäyttö"],
+      "desc": "Näyttää yksityiskohtaisemmat tiedot pienellä fontilla juotostilassa"
+    },
+    "ScrollingSpeed": {
+      "text2": ["Selityksien", "nopeus"],
+      "desc": "Selityksien vieritysnopeus (H=hidas | N=nopea)"
+    },
+    "QCMaxVoltage": {
+      "text2": ["QC", "jännite"],
+      "desc": "Ensisijainen maksimi QC jännite"
+    },
+    "PDNegTimeout": {
+      "text2": ["PD", "timeout"],
+      "desc": "PD negotiation timeout in 100ms steps for compatibility with some QC chargers (0: disabled)"
+    },
+    "PowerLimit": {
+      "text2": ["Tehon-", "rajoitus"],
+      "desc": "Suurin sallittu teho (Watti)"
+    },
+    "ReverseButtonTempChange": {
+      "text2": ["Suunnanvaihto", "+ - näppäimille"],
+      "desc": "Lämpötilapainikkeiden suunnan vaihtaminen"
+    },
+    "TempChangeShortStep": {
+      "text2": ["Lämmön muutos", "lyhyt painal."],
+      "desc": "Lämpötilan muutos lyhyellä painalluksella"
+    },
+    "TempChangeLongStep": {
+      "text2": ["Lämmön muutos", "pitkä painal."],
+      "desc": "Lämpötilan muutos pitkällä painalluksella"
+    },
+    "PowerPulsePower": {
+      "text2": ["Herätyspulssin", "voimakkuus"],
+      "desc": "Herätyspulssin voimakkuus (watti)"
+    },
+    "HallEffSensitivity": {
+      "text2": ["Hall-", "herk."],
+      "desc": "Hall-efektianturin herkkyys lepotilan tunnistuksessa  (P=pois | A=alhainen | K=keskiverto | S=suuri)"
+    },
+    "LockingMode": {
+      "text2": ["Salli nappien", "lukitus"],
+      "desc": "Kolvatessa paina molempia näppäimiä lukitaksesi ne (P=pois | V=vain tehostus | K=kaikki)"
+    },
+    "MinVolCell": {
+      "text2": ["Pienin", "jännite"],
+      "desc": "Pienin sallittu jännite per kenno (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)"
+    },
+    "AnimLoop": {
+      "text2": ["Animaation", "toistaminen"],
+      "desc": "Toista animaatiot valikossa"
+    },
+    "AnimSpeed": {
+      "text2": ["Animaation", "nopeus"],
+      "desc": "Animaatioiden nopeus valikossa (P=pois | A=alhainen | K=keskiverto | S=suuri)"
+    },
+    "PowerPulseWait": {
+      "text2": ["Pulssin", "odotusaika"],
+      "desc": "Odotusaika herätyspulssin lähetykseen (x 2.5s)"
+    },
+    "PowerPulseDuration": {
+      "text2": ["Pulssin", "kesto"],
+      "desc": "Herätyspulssin kesto (x 250ms)"
+    },
+    "LanguageSwitch": {
+      "text2": ["Kieli:", " FI       Suomi"],
+      "desc": ""
+    },
+    "Brightness": {
+      "text2": ["Screen", "Brightness"],
+      "desc": "Adjust the contrast/brightness of the OLED screen"
+    },
+    "ColourInversion": {
+      "text2": ["Screen", "Invert"],
+      "desc": "Invert the colours of the OLED screen"
+    }
+  }
+}

Translations/translation_FR.json

@@ -0,0 +1,213 @@
+{
+  "languageCode": "FR",
+  "languageLocalName": "Français",
+  "fonts": ["ascii_basic", "latin_extended"],
+  "messages": {
+    "SettingsCalibrationDone": "Calibration effectuée !",
+    "SettingsCalibrationWarning": "Assurez-vous que la panne soit à température ambiante avant de continuer !",
+    "SettingsResetWarning": "Voulez-vous vraiment réinitialiser les paramètres aux valeurs par défaut ?",
+    "UVLOWarningString": "DC FAIBL",
+    "UndervoltageString": "Sous-tension",
+    "InputVoltageString": "V d'entrée: ",
+    "WarningTipTempString": "Temp. Panne : ",
+    "BadTipString": "PANNE HS",
+    "SleepingSimpleString": "Zzzz",
+    "SleepingAdvancedString": "En veille...",
+    "WarningSimpleString": "CHAUD !",
+    "WarningAdvancedString": "ATTENTION ! CHAUD !",
+    "SleepingTipAdvancedString": "Panne:",
+    "IdleTipString": "Act:",
+    "IdleSetString": " Reg:",
+    "TipDisconnectedString": "PANNE DÉBRANCHÉE",
+    "SolderingAdvancedPowerPrompt": "Puiss.:",
+    "OffString": "Off",
+    "YourGainMessage": "Gain : "
+  },
+  "messagesWarn": {
+    "ResetOKMessage": "Reset OK",
+    "SettingsResetMessage": ["Réglages", "réinitialisés !"],
+    "NoAccelerometerMessage": ["Accéléromètre", "non détecté !"],
+    "NoPowerDeliveryMessage": ["USB-PD", "non détecté !"],
+    "LockingKeysString": "VERROUIL",
+    "UnlockingKeysString": "DEVERROU",
+    "WarningKeysLockedString": "! VERR. !",
+    "WarningThermalRunaway": ["Emballement", "thermique"]
+  },
+  "characters": {
+    "SettingRightChar": "D",
+    "SettingLeftChar": "G",
+    "SettingAutoChar": "A",
+    "SettingOffChar": "D",
+    "SettingSlowChar": "L",
+    "SettingMediumChar": "M",
+    "SettingFastChar": "R",
+    "SettingStartNoneChar": "D",
+    "SettingStartSolderingChar": "A",
+    "SettingStartSleepChar": "V",
+    "SettingStartSleepOffChar": "O",
+    "SettingSensitivityOff": "D",
+    "SettingSensitivityLow": "B",
+    "SettingSensitivityMedium": "M",
+    "SettingSensitivityHigh": "H",
+    "SettingLockDisableChar": "D",
+    "SettingLockBoostChar": "B",
+    "SettingLockFullChar": "V",
+    "SettingNAChar": "N/A"
+  },
+  "menuGroups": {
+    "PowerMenu": {
+      "text2": ["Paramètres", "d'alim."],
+      "desc": "Paramètres d'alimentation"
+    },
+    "SolderingMenu": {
+      "text2": ["Paramètres", "de soudure"],
+      "desc": "Paramètres de soudure"
+    },
+    "PowerSavingMenu": {
+      "text2": ["Mode", "veille"],
+      "desc": "Paramètres d'économie d'énergie"
+    },
+    "UIMenu": {
+      "text2": ["Interface", "utilisateur"],
+      "desc": "Paramètres de l'interface utilisateur"
+    },
+    "AdvancedMenu": {
+      "text2": ["Options", "avancées"],
+      "desc": "Options avancées"
+    }
+  },
+  "menuOptions": {
+    "DCInCutoff": {
+      "text2": ["Source", "d'alim."],
+      "desc": "Source d'alimentation. Règle la tension de coupure (DC 10V) (S 3.3V par cellules, désactive la limite de puissance)"
+    },
+    "SleepTemperature": {
+      "text2": ["Temp.", "veille"],
+      "desc": "Température de la panne en \"mode veille\""
+    },
+    "SleepTimeout": {
+      "text2": ["Délai", "veille"],
+      "desc": "Délai avant mise en veille (S=secondes | M=minutes)"
+    },
+    "ShutdownTimeout": {
+      "text2": ["Délai", "extinction"],
+      "desc": "Délai avant extinction (M=minutes)"
+    },
+    "MotionSensitivity": {
+      "text2": ["Sensibilité", "au mouvement"],
+      "desc": "0=désactivé | 1=peu sensible | ... | 9=très sensible"
+    },
+    "TemperatureUnit": {
+      "text2": ["Unité de", "température"],
+      "desc": "C=Celsius | F=Fahrenheit"
+    },
+    "AdvancedIdle": {
+      "text2": ["Écran veille", "détaillé"],
+      "desc": "Afficher les informations détaillées sur l'écran de veille"
+    },
+    "DisplayRotation": {
+      "text2": ["Orientation", "de l'écran"],
+      "desc": "D=droitier | G=gaucher | A=automatique"
+    },
+    "BoostTemperature": {
+      "text2": ["Temp.", "boost"],
+      "desc": "Température utilisée en \"mode boost\""
+    },
+    "AutoStart": {
+      "text2": ["Chauffer au", "démarrage"],
+      "desc": "D=désactivé | A=activé | V=mode veille | O=mode veille à température ambiante"
+    },
+    "CooldownBlink": {
+      "text2": ["Refroidir en", "clignotant"],
+      "desc": "Faire clignoter la température lors du refroidissement tant que la panne est chaude"
+    },
+    "TemperatureCalibration": {
+      "text2": ["Étalonner", "température"],
+      "desc": "Étalonner température de la panne"
+    },
+    "SettingsReset": {
+      "text2": ["Réinitialisation", "d'usine"],
+      "desc": "Réinitialiser tous les réglages"
+    },
+    "VoltageCalibration": {
+      "text2": ["Étalonner", "tension d'entrée"],
+      "desc": "Étalonner tension d'entrée (appui long pour quitter)"
+    },
+    "AdvancedSoldering": {
+      "text2": ["Écran soudure", "détaillé"],
+      "desc": "Afficher les informations détaillées sur l'écran de soudure"
+    },
+    "ScrollingSpeed": {
+      "text2": ["Vitesse de", "défilement"],
+      "desc": "Vitesse de défilement du texte (R=rapide | L=lent)"
+    },
+    "QCMaxVoltage": {
+      "text2": ["Tension", "QC"],
+      "desc": "Tension maximale désirée avec une alimentation QC"
+    },
+    "PDNegTimeout": {
+      "text2": ["Délai", "expiration PD"],
+      "desc": "Délai de la negociation PD par étapes de 100ms pour la compatiblité avec certains chargeurs QC (0: désactivé)"
+    },
+    "PowerLimit": {
+      "text2": ["Limite de", "puissance"],
+      "desc": "Puissance maximale utilisable (W=watts)"
+    },
+    "ReverseButtonTempChange": {
+      "text2": ["Inverser les", "touches + -"],
+      "desc": "Inverser les boutons d'ajustement de température"
+    },
+    "TempChangeShortStep": {
+      "text2": ["Incrément", "appui court"],
+      "desc": "Incrément de changement de température sur appui court"
+    },
+    "TempChangeLongStep": {
+      "text2": ["Incrément", "appui long"],
+      "desc": "Incrément de changement de température sur appui long"
+    },
+    "PowerPulsePower": {
+      "text2": ["Puissance des", "impulsions"],
+      "desc": "Puissance des impulsions pour éviter la mise en veille des batteries (watts)"
+    },
+    "LockingMode": {
+      "text2": ["Verrouiller", "les boutons"],
+      "desc": "Pendant la soudure, appuyer sur les deux boutons pour les verrouiller (D=désactivé | B=boost seulement | V=verr. total)"
+    },
+    "HallEffSensitivity": {
+      "text2": ["Sensibilité", "capteur effet hall"],
+      "desc": "Sensibilité du capteur à effet Hall pour la mise en veille (D=désactivé | B=basse | M=moyenne | H=haute)"
+    },
+    "MinVolCell": {
+      "text2": ["Tension", "minimale"],
+      "desc": "Tension minimale autorisée par cellule (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)"
+    },
+    "AnimLoop": {
+      "text2": ["Rejouer", "anim. icônes"],
+      "desc": "Rejouer en boucle les animations des icônes dans le menu principal"
+    },
+    "AnimSpeed": {
+      "text2": ["Vitesse", "anim. icônes"],
+      "desc": "Vitesse des animations des icônes dans le menu (D=désactivé | L=lente | M=moyenne | R=rapide)"
+    },
+    "PowerPulseWait": {
+      "text2": ["Délai entre", "les impulsions"],
+      "desc": "Délai entre chaque impulsion pour empêcher la mise en veille (x 2.5s)"
+    },
+    "PowerPulseDuration": {
+      "text2": ["Durée des", "impulsions"],
+      "desc": "Durée des impulsions pour empêcher la mise en veille (x 250ms)"
+    },
+    "LanguageSwitch": {
+      "text2": ["Langue :", " FR    Français"],
+      "desc": ""
+    },
+    "Brightness": {
+      "text2": ["Luminosité", "de l'écran"],
+      "desc": "Ajuster le contraste/luminosité de l'écran OLED"
+    },
+    "ColourInversion": {
+      "text2": ["Inverser", "les couleurs"],
+      "desc": "Inverser les couleurs de l'écran OLED"
+    }
+  }
+}

Translations/translation_HR.json

@@ -0,0 +1,213 @@
+{
+  "languageCode": "HR",
+  "languageLocalName": "Hrvatski",
+  "fonts": ["ascii_basic", "latin_extended"],
+  "messages": {
+    "SettingsCalibrationDone": "Kalibracija gotova!",
+    "SettingsCalibrationWarning": "Provjerite da je vršak ohlađen na sobnu temperaturu prije nego što nastavite!",
+    "SettingsResetWarning": "Jeste li sigurni da želite sve postavke vratiti na tvorničke vrijednosti?",
+    "UVLOWarningString": "BATERIJA",
+    "UndervoltageString": "PRENIZAK NAPON",
+    "InputVoltageString": "Napajanje: ",
+    "WarningTipTempString": "Temp vrha: ",
+    "BadTipString": "LOŠ VRH",
+    "SleepingSimpleString": "Zzz ",
+    "SleepingAdvancedString": "SPAVANJE...",
+    "WarningSimpleString": "VRUĆ",
+    "WarningAdvancedString": "OPREZ, VRUĆE!",
+    "SleepingTipAdvancedString": "Vrh: ",
+    "IdleTipString": "Vrh: ",
+    "IdleSetString": " / ",
+    "TipDisconnectedString": "VRH NIJE SPOJEN!",
+    "SolderingAdvancedPowerPrompt": "Snaga: ",
+    "OffString": "Off",
+    "YourGainMessage": "Your gain:"
+  },
+  "messagesWarn": {
+    "ResetOKMessage": "Reset OK",
+    "SettingsResetMessage": ["Settings were", "reset!"],
+    "NoAccelerometerMessage": ["No accelerometer", "detected!"],
+    "NoPowerDeliveryMessage": ["No USB-PD IC", "detected!"],
+    "LockingKeysString": " LOCKED",
+    "UnlockingKeysString": "UNLOCKED",
+    "WarningKeysLockedString": "!LOCKED!",
+    "WarningThermalRunaway": ["Thermal", "Runaway"]
+  },
+  "characters": {
+    "SettingRightChar": "D",
+    "SettingLeftChar": "L",
+    "SettingAutoChar": "A",
+    "SettingOffChar": "O",
+    "SettingSlowChar": "S",
+    "SettingMediumChar": "M",
+    "SettingFastChar": "B",
+    "SettingStartNoneChar": "I",
+    "SettingStartSolderingChar": "L",
+    "SettingStartSleepChar": "R",
+    "SettingStartSleepOffChar": "S",
+    "SettingSensitivityOff": "O",
+    "SettingSensitivityLow": "L",
+    "SettingSensitivityMedium": "M",
+    "SettingSensitivityHigh": "H",
+    "SettingLockDisableChar": "D",
+    "SettingLockBoostChar": "B",
+    "SettingLockFullChar": "F",
+    "SettingNAChar": "N/A"
+  },
+  "menuGroups": {
+    "PowerMenu": {
+      "text2": ["Power", "settings"],
+      "desc": "Power settings"
+    },
+    "SolderingMenu": {
+      "text2": ["Postavke", "lemljenja"],
+      "desc": "Postavke pri lemljenju"
+    },
+    "PowerSavingMenu": {
+      "text2": ["Ušteda", "energije"],
+      "desc": "Postavke spavanja i štednje energije"
+    },
+    "UIMenu": {
+      "text2": ["Korisničko", "sučelje"],
+      "desc": "Postavke korisničkog sučelja"
+    },
+    "AdvancedMenu": {
+      "text2": ["Napredne", "opcije"],
+      "desc": "Upravljanje naprednim opcijama"
+    }
+  },
+  "menuOptions": {
+    "DCInCutoff": {
+      "text2": ["Izvor", "napajanja"],
+      "desc": "Izvor napajanja. Postavlja napon isključivanja. (DC 10V) (S 3.3V po ćeliji)"
+    },
+    "SleepTemperature": {
+      "text2": ["Temp", "spavanja"],
+      "desc": "Temperatura na koju se spušta lemilica nakon određenog vremena mirovanja. (C | F)"
+    },
+    "SleepTimeout": {
+      "text2": ["Vrijeme", "spavanja"],
+      "desc": "Vrijeme mirovanja nakon kojega lemilica spušta temperaturu. (Minute | Sekunde)"
+    },
+    "ShutdownTimeout": {
+      "text2": ["Vrijeme", "gašenja"],
+      "desc": "Vrijeme mirovanja nakon kojega će se lemilica ugasiti. (Minute)"
+    },
+    "MotionSensitivity": {
+      "text2": ["Osjetljivost", "pokreta"],
+      "desc": "Osjetljivost prepoznavanja pokreta. (0=Ugašeno | 1=Najmanje osjetljivo | ... | 9=Najosjetljivije)"
+    },
+    "TemperatureUnit": {
+      "text2": ["Jedinica", "temperature"],
+      "desc": "Jedinica temperature. (C=Celzij | F=Fahrenheit)"
+    },
+    "AdvancedIdle": {
+      "text2": ["Detalji", "pri čekanju"],
+      "desc": "Prikazivanje detaljnih informacija tijekom čekanja."
+    },
+    "DisplayRotation": {
+      "text2": ["Rotacija", "ekrana"],
+      "desc": "Orijentacija ekrana. (D=Desnoruki | L=Ljevoruki | A=Automatski)"
+    },
+    "BoostTemperature": {
+      "text2": ["Boost", "temp"],
+      "desc": "Temperatura u pojačanom (Boost) načinu."
+    },
+    "AutoStart": {
+      "text2": ["Auto", "start"],
+      "desc": "Ako je aktivno, lemilica po uključivanju napajanja odmah počinje grijati. (I=isključeno | L=lemljenje | R=rezervni | S=rezervni sobna temperatura)"
+    },
+    "CooldownBlink": {
+      "text2": ["Upozorenje", "pri hlađenju"],
+      "desc": "Bljeskanje temperature prilikom hlađenja, ako je lemilica vruća."
+    },
+    "TemperatureCalibration": {
+      "text2": ["Kalibracija", "temperature"],
+      "desc": "Kalibriranje temperature mjeri razliku temperatura vrška i drške, dok je lemilica hladna."
+    },
+    "SettingsReset": {
+      "text2": ["Tvorničke", "postavke"],
+      "desc": "Vraćanje svih postavki na tvorničke vrijednosti."
+    },
+    "VoltageCalibration": {
+      "text2": ["Kalibracija", "napona napajanja"],
+      "desc": "Kalibracija ulaznog napona. Podešavanje gumbima, dugački pritisak za kraj."
+    },
+    "AdvancedSoldering": {
+      "text2": ["Detalji", "pri lemljenju"],
+      "desc": "Prikazivanje detaljnih informacija tijekom lemljenja."
+    },
+    "ScrollingSpeed": {
+      "text2": ["Brzina", "poruka"],
+      "desc": "Brzina kretanja dugačkih poruka. (B=brzo | S=sporo)"
+    },
+    "QCMaxVoltage": {
+      "text2": ["Snaga", "napajanja"],
+      "desc": "Snaga modula za napajanje"
+    },
+    "PDNegTimeout": {
+      "text2": ["PD", "timeout"],
+      "desc": "PD negotiation timeout in 100ms steps for compatibility with some QC chargers (0: disabled)"
+    },
+    "PowerLimit": {
+      "text2": ["Power", "Limit"],
+      "desc": "Maximum power the iron can use (Watts)"
+    },
+    "ReverseButtonTempChange": {
+      "text2": ["Key +-", "reverse?"],
+      "desc": "Reverse the tip temperature change buttons plus minus assignment."
+    },
+    "TempChangeShortStep": {
+      "text2": ["Temp change", "short?"],
+      "desc": "Temperature change steps on short button press!"
+    },
+    "TempChangeLongStep": {
+      "text2": ["Temp change", "long?"],
+      "desc": "Temperature change steps on long button press!"
+    },
+    "PowerPulsePower": {
+      "text2": ["Power", "Pulse W"],
+      "desc": "Keep awake pulse power intensity"
+    },
+    "HallEffSensitivity": {
+      "text2": ["Hall Eff", "Sensitivity"],
+      "desc": "Sensitivity of the Hall effect sensor in detecting sleep (O=Off | L=Low | M=Medium | H=High)"
+    },
+    "LockingMode": {
+      "text2": ["Allow buttons", "locking"],
+      "desc": "When soldering, long press on both buttons lock them (D=Disable | B=Boost only | F=Full locking)"
+    },
+    "MinVolCell": {
+      "text2": ["Minimum", "voltage"],
+      "desc": "Minimum allowed voltage per cell (3S: 3 - 3.7V, 4-6S: 2.4 - 3.7V)"
+    },
+    "AnimLoop": {
+      "text2": ["Anim.", "loop"],
+      "desc": "Loop icon animations in root menu"
+    },
+    "AnimSpeed": {
+      "text2": ["Anim.", "speed"],
+      "desc": "Speed of icon animations in menu (O=off | L=low | M=medium | H=high)"
+    },
+    "PowerPulseWait": {
+      "text2": ["Power pulse", "wait time"],
+      "desc": "Time to wait before triggering every keep-awake pulse (x 2.5s)"
+    },
+    "PowerPulseDuration": {
+      "text2": ["Power pulse", "duration"],
+      "desc": "Keep-awake-pulse duration (x 250ms)"
+    },
+    "LanguageSwitch": {
+      "text2": ["Jezik:", " HR    Hrvatski"],
+      "desc": ""
+    },
+    "Brightness": {
+      "text2": ["Screen", "Brightness"],
+      "desc": "Adjust the contrast/brightness of the OLED screen"
+    },
+    "ColourInversion": {
+      "text2": ["Screen", "Invert"],
+      "desc": "Invert the colours of the OLED screen"
+    }
+  }
+}

Translations/translation_HU.json

@@ -0,0 +1,213 @@
+{
+  "languageCode": "HU",
+  "languageLocalName": "Magyar",
+  "fonts": ["ascii_basic", "latin_extended"],
+  "messages": {
+    "SettingsCalibrationDone": "Kalibráció befejezve!",
+    "SettingsCalibrationWarning": "Folytatás előtt győződjön meg róla, hogy a páka szobahőmérsékletű!",
+    "SettingsResetWarning": "Biztosan visszaállítja a beállításokat az alapértelmezett értékekre?",
+    "UVLOWarningString": "DC KEVÉS",
+    "UndervoltageString": "Alulfeszültség",
+    "InputVoltageString": "Bemenet V: ",
+    "WarningTipTempString": "Hegy hő: ",
+    "BadTipString": "PÁKAHIBA",
+    "SleepingSimpleString": "Zzzz",
+    "SleepingAdvancedString": "Alvás...",
+    "WarningSimpleString": "FORRÓ!",
+    "WarningAdvancedString": "!! FORRÓ PÁKA !!",
+    "SleepingTipAdvancedString": "Páka:",
+    "IdleTipString": "Páka:",
+    "IdleSetString": " Cél:",
+    "TipDisconnectedString": "PÁKA LEVÉVE",
+    "SolderingAdvancedPowerPrompt": "Telj: ",
+    "OffString": "Ki",
+    "YourGainMessage": "Erősítés:"
+  },
+  "messagesWarn": {
+    "ResetOKMessage": ["Törlés OK", ""],
+    "SettingsResetMessage": ["Beállítások", "törölve!"],
+    "NoAccelerometerMessage": ["Nincs", "gyorsulásmérő!"],
+    "NoPowerDeliveryMessage": ["Nincs USB-PD IC!", ""],
+    "LockingKeysString": "LEZÁRVA",
+    "UnlockingKeysString": "FELOLDVA",
+    "WarningKeysLockedString": "!LEZÁRVA!",
+    "WarningThermalRunaway": ["Thermal", "Runaway"]
+  },
+  "characters": {
+    "SettingRightChar": "J",
+    "SettingLeftChar": "B",
+    "SettingAutoChar": "A",
+    "SettingOffChar": "0",
+    "SettingSlowChar": "L",
+    "SettingMediumChar": "K",
+    "SettingFastChar": "G",
+    "SettingStartNoneChar": "K",
+    "SettingStartSolderingChar": "F",
+    "SettingStartSleepChar": "A",
+    "SettingStartSleepOffChar": "S",
+    "SettingSensitivityOff": "0",
+    "SettingSensitivityLow": "A",
+    "SettingSensitivityMedium": "K",
+    "SettingSensitivityHigh": "M",
+    "SettingLockDisableChar": "K",
+    "SettingLockBoostChar": "B",
+    "SettingLockFullChar": "T",
+    "SettingNAChar": "N/A"
+  },
+  "menuGroups": {
+    "PowerMenu": {
+      "text2": ["Táp", "beállítások"],
+      "desc": "Táp beállítások"
+    },
+    "SolderingMenu": {
+      "text2": ["Forrasztási", "beállítások"],
+      "desc": "Forrasztási beállítások"
+    },
+    "PowerSavingMenu": {
+      "text2": ["Alvási", "módok"],
+      "desc": "Energiatakarékossági beállítások"
+    },
+    "UIMenu": {
+      "text2": ["Felhasználói", "felület"],
+      "desc": "Felhasználói felület beállításai"
+    },
+    "AdvancedMenu": {
+      "text2": ["Haladó", "beállítások"],
+      "desc": "Haladó beállítások"
+    }
+  },
+  "menuOptions": {
+    "DCInCutoff": {
+      "text2": ["Áram", "forrás"],
+      "desc": "Kikapcsolási feszültség beállítása (DC:10V | S:3.3V/LiPo cella)"
+    },
+    "SleepTemperature": {
+      "text2": ["Alvási", "hőmérséklet"],
+      "desc": "Hőmérséklet alvó módban (C | F)"
+    },
+    "SleepTimeout": {
+      "text2": ["Alvás", "időzítő"],
+      "desc": "Alvási időzítő (perc | másodperc)"
+    },
+    "ShutdownTimeout": {
+      "text2": ["Kikapcsolás", "időzítő"],
+      "desc": "Kikapcsolási időzítő (perc)"
+    },
+    "MotionSensitivity": {
+      "text2": ["Mozgás", "érzékenység"],
+      "desc": "Mozgás érzékenység beállítása (0=kikapcsolva | 1=legkevésbé érzékeny | ... | 9=legérzékenyebb)"
+    },
+    "TemperatureUnit": {
+      "text2": ["Hőmérséklet", "mértékegysége"],
+      "desc": "Hőmérséklet mértékegysége (C=Celsius | F=Fahrenheit)"
+    },
+    "AdvancedIdle": {
+      "text2": ["Részletes", "készenlét"],
+      "desc": "Részletes információk megjelenítése kisebb betűméretben a készenléti képernyőn"
+    },
+    "DisplayRotation": {
+      "text2": ["Kijelző", "tájolása"],
+      "desc": "Kijelző tájolása (J=jobbkezes | B=balkezes | A=automatikus)"
+    },
+    "BoostTemperature": {
+      "text2": ["Boost", "hőmérséklet"],
+      "desc": "Hőmérséklet \"boost\" módban"
+    },
+    "AutoStart": {
+      "text2": ["Automatikus", "indítás"],
+      "desc": "Bekapcsolás után automatikusan lépjen forrasztás módba (K=ki | F=forrasztás | A=alvó mód | S=szobahőmérséklet)"
+    },
+    "CooldownBlink": {
+      "text2": ["Villogás", "hűléskor"],
+      "desc": "Villogjon a hőmérséklet hűlés közben, amíg a páka forró"
+    },
+    "TemperatureCalibration": {
+      "text2": ["Hőmérséklet", "kalibrálása?"],
+      "desc": "Páka hőmérséklet-érzékelőjének kalibrálása"
+    },
+    "SettingsReset": {
+      "text2": ["Gyári", "beállítások?"],
+      "desc": "Beállítások alaphelyzetbe állítása"
+    },
+    "VoltageCalibration": {
+      "text2": ["Bemeneti fesz.", "kalibrálása?"],
+      "desc": "Bemeneti feszültség kalibrálása (röviden megnyomva módosítás, hosszan megnyomva kilépés)"
+    },
+    "AdvancedSoldering": {
+      "text2": ["Részletes", "forrasztás"],
+      "desc": "Részletes információk megjelenítése forrasztás közben"
+    },
+    "ScrollingSpeed": {
+      "text2": ["Görgetés", "sebessége"],
+      "desc": "Szöveggörgetés sebessége"
+    },
+    "QCMaxVoltage": {
+      "text2": ["Max. USB", "feszültség"],
+      "desc": "Maximális USB feszültség (QuickCharge)"
+    },
+    "PDNegTimeout": {
+      "text2": ["PD", "időtúllépés"],
+      "desc": "PD egyeztetési leidőzítés 100ms lépésekben megadva néhány QC töltővel való kompatibilitás érdekében (0: kikapcsolva)"
+    },
+    "PowerLimit": {
+      "text2": ["Teljesítmény", "maximum"],
+      "desc": "Maximális felvett teljesitmény beállitása"
+    },
+    "ReverseButtonTempChange": {
+      "text2": ["+/- gomb", "fordítva"],
+      "desc": "Páka hőmérséklet növelés/csökkentés gombok felcserélése"
+    },
+    "TempChangeShortStep": {
+      "text2": ["Hőm. váltás", "rövid"],
+      "desc": "Hőmérséklet váltás rövid gombnyomásra (C | F)"
+    },
+    "TempChangeLongStep": {
+      "text2": ["Hőm. váltás", "hosszú"],
+      "desc": "Hőmérséklet váltás hosszú gombnyomásra (C | F)"
+    },
+    "PowerPulsePower": {
+      "text2": ["Ébr. pulzus", "nagysága"],
+      "desc": "Powerbankot ébrentartó áramfelvételi pulzusok nagysága (W)"
+    },
+    "HallEffSensitivity": {
+      "text2": ["Alvásérzékelő", "érzékenység"],
+      "desc": "Alvásérzékelő gyorsulásmérő érzékenysége (0=ki | A=alacsony | K=közepes | M=magas)"
+    },
+    "LockingMode": {
+      "text2": ["Lezárás", "engedélyezés"],
+      "desc": "Forrasztás közben mindkét gombot hosszan lenyomva rögzíti a hőmérsékletet (K=ki | B=csak \"boost\" mód | T=teljes lezárás)"
+    },
+    "MinVolCell": {
+      "text2": ["Minimum", "feszültség"],
+      "desc": "Minimális engedélyezett cellafeszültség (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)"
+    },
+    "AnimLoop": {
+      "text2": ["Folytonos", "animáció"],
+      "desc": "Főmenü ikonjainak folytonos animációja"
+    },
+    "AnimSpeed": {
+      "text2": ["Animáció", "sebessége"],
+      "desc": "Menüikonok animációjának sebessége (0=ki | L=lassú | K=közepes | G=gyors)"
+    },
+    "PowerPulseWait": {
+      "text2": ["Ébr. pulzus", "időköze"],
+      "desc": "Powerbankot ébrentartó áramfelvételi pulzusok időköze (x2.5s)"
+    },
+    "PowerPulseDuration": {
+      "text2": ["Ébr. pulzus", "időtartama"],
+      "desc": "Powerbankot ébrentartó áramfelvételi pulzusok időtartama (x250ms)"
+    },
+    "LanguageSwitch": {
+      "text2": ["Nyelv:", " HU      Magyar"],
+      "desc": ""
+    },
+    "Brightness": {
+      "text2": ["Screen", "Brightness"],
+      "desc": "Adjust the contrast/brightness of the OLED screen"
+    },
+    "ColourInversion": {
+      "text2": ["Screen", "Invert"],
+      "desc": "Invert the colours of the OLED screen"
+    }
+  }
+}

Translations/translation_IT.json

@@ -1,54 +1,76 @@
 {
 	"languageCode": "IT",
 	"languageLocalName": "Italiano",
-	"cyrillicGlyphs": false,
+	"fonts": [
+		"ascii_basic",
+		"latin_extended"
+	],
 	"messages": {
-		"SettingsCalibrationDone": "Calibrazione effettuata",
-		"SettingsCalibrationWarning": "Assicurati che la punta si trovi a temperatura ambiente prima di continuare!",
+		"SettingsCalibrationWarning": "Assicurarsi che la punta si trovi a temperatura ambiente prima di continuare!",
 		"SettingsResetWarning": "Ripristinare le impostazioni iniziali?",
 		"UVLOWarningString": "DC BASSA",
 		"UndervoltageString": "DC INSUFFICIENTE",
-		"InputVoltageString": "V ingresso:",
-		"WarningTipTempString": "Temp punta:",
-		"BadTipString": "PUNTA KO",
+		"InputVoltageString": "V in:",
 		"SleepingSimpleString": "Zzz ",
 		"SleepingAdvancedString": "Riposo",
-		"WarningSimpleString": "HOT!",
-		"WarningAdvancedString": "PUNTA CALDA!",
 		"SleepingTipAdvancedString": "Punta:",
 		"IdleTipString": "T punta:",
 		"IdleSetString": "/",
 		"TipDisconnectedString": "PUNTA ASSENTE",
 		"SolderingAdvancedPowerPrompt": "Potenz:",
-		"OffString": "OFF",
+		"OffString": "OFF"
+	},
+	"messagesWarn": {
 		"ResetOKMessage": "Reset OK",
-		"YourGainMessage": "Guad.: ",
-		"SettingsResetMessage": "Reset effettuato",
-		"NoAccelerometerMessage": "Accelerometro\nnon rilevato",
-		"NoPowerDeliveryMessage": "USB-PD non\ndisponibile",
+		"SettingsResetMessage": [
+			"Impostazioni",
+			"ripristinate"
+		],
+		"NoAccelerometerMessage": [
+			"Accelerometro",
+			"non rilevato"
+		],
+		"NoPowerDeliveryMessage": [
+			"USB PD",
+			"non rilevato"
+		],
 		"LockingKeysString": "Blocc.",
 		"UnlockingKeysString": "Sblocc.",
-		"WarningKeysLockedString": "BLOCCATO"
+		"WarningKeysLockedString": "BLOCCATO",
+		"WarningThermalRunaway": [
+			"Temperatura",
+			"fuori controllo"
+		]
 	},
 	"characters": {
 		"SettingRightChar": "D",
 		"SettingLeftChar": "S",
 		"SettingAutoChar": "A",
-		"SettingFastChar": "V",
+		"SettingOffChar": "O",
 		"SettingSlowChar": "L",
+		"SettingMediumChar": "M",
+		"SettingFastChar": "V",
+		"SettingStartNoneChar": "D",
 		"SettingStartSolderingChar": "S",
 		"SettingStartSleepChar": "R",
 		"SettingStartSleepOffChar": "A",
-		"SettingStartNoneChar": "D",
 		"SettingSensitivityOff": "O",
 		"SettingSensitivityLow": "B",
 		"SettingSensitivityMedium": "M",
 		"SettingSensitivityHigh": "A",
 		"SettingLockDisableChar": "D",
 		"SettingLockBoostChar": "T",
-		"SettingLockFullChar": "C"
+		"SettingLockFullChar": "C",
+		"SettingNAChar": " NA"
 	},
 	"menuGroups": {
+		"PowerMenu": {
+			"text2": [
+				"Opzioni",
+				"alimentaz"
+			],
+			"desc": "Menù d'impostazioni per l'alimentazione"
+		},
 		"SolderingMenu": {
 			"text2": [
 				"Opzioni",
@@ -84,42 +106,42 @@
 				"Sorgente",
 				"alimentaz"
 			],
-			"desc": "Scegli la sorgente di alimentazione; se a batteria, limita lo scaricamento al valore di soglia <DC: 10V; S: 3,3V per cella>"
+			"desc": "Imposta una tensione minima di alimentazione attraverso la selezione di una sorgente [DC: 10 V; 3S/4S/5S/6S: 3,3 V per cella]"
 		},
 		"SleepTemperature": {
 			"text2": [
 				"Temp",
 				"riposo"
 			],
-			"desc": "Imposta la temperatura da mantenere in modalità Riposo <°C/°F>"
+			"desc": "Imposta la temperatura da mantenere in modalità Riposo [°C/°F]"
 		},
 		"SleepTimeout": {
 			"text2": [
 				"Timer",
 				"riposo"
 			],
-			"desc": "Imposta il timer per entrare in modalità Riposo <minuti/secondi>"
+			"desc": "Imposta il timer per entrare in modalità Riposo [minuti/secondi]"
 		},
 		"ShutdownTimeout": {
 			"text2": [
 				"Timer",
 				"spegnimento"
 			],
-			"desc": "Imposta il timer per lo spegnimento <minuti>"
+			"desc": "Imposta il timer per lo spegnimento [minuti]"
 		},
 		"MotionSensitivity": {
 			"text2": [
 				"Sensibilità",
 				"al movimento"
 			],
-			"desc": "Imposta la sensibilità al movimento per uscire dalla modalità Riposo <0: nessuna; 1: minima; 9: massima>"
+			"desc": "Imposta la sensibilità al movimento per uscire dalla modalità Riposo [0: nessuna; 1: minima; 9: massima]"
 		},
 		"TemperatureUnit": {
 			"text2": [
 				"Unità di",
 				"temperatura"
 			],
-			"desc": "Scegli l'unità di misura per la temperatura <C: grado Celsius; F: grado Farenheit>"
+			"desc": "Scegli l'unità di misura per la temperatura [C: grado Celsius; F: grado Farenheit]"
 		},
 		"AdvancedIdle": {
 			"text2": [
@@ -131,23 +153,23 @@
 		"DisplayRotation": {
 			"text2": [
 				"Orientamento",
-				"display"
+				"schermo"
 			],
-			"desc": "Imposta l'orientamento del display <A: automatico; S: mano sinistra; D: mano destra>"
+			"desc": "Imposta l'orientamento dello schermo [D: mano destra; S: mano sinistra; A: automatico]"
 		},
 		"BoostTemperature": {
 			"text2": [
 				"Temp",
-				"«Turbo»"
+				"Turbo"
 			],
-			"desc": "Imposta la temperatura della funzione «Turbo» <°C/°F>"
+			"desc": "Imposta la temperatura della funzione Turbo [°C/°F]"
 		},
 		"AutoStart": {
 			"text2": [
 				"Avvio",
 				"automatico"
 			],
-			"desc": "Attiva automaticamente il saldatore quando viene alimentato <D: disattiva; S: saldatura; R: riposo; A: temperatura ambiente>"
+			"desc": "Attiva automaticamente il saldatore quando viene alimentato [D: disattiva; S: saldatura; R: riposo; A: temperatura ambiente]"
 		},
 		"CooldownBlink": {
 			"text2": [
@@ -168,7 +190,7 @@
 				"Ripristino",
 				"impostazioni"
 			],
-			"desc": "Ripristina tutte le impostazioni"
+			"desc": "Ripristina le impostazioni allo stato iniziale"
 		},
 		"VoltageCalibration": {
 			"text2": [
@@ -189,42 +211,28 @@
 				"Velocità",
 				"testo"
 			],
-			"desc": "Imposta la velocità di scorrimento del testo <L: lento; V: veloce>"
-		},
-		"TipModel": {
-			"text2": [
-				"Modello",
-				"punta"
-			],
-			"desc": "Seleziona il modello della punta in uso"
-		},
-		"SimpleCalibrationMode": {
-			"text2": [
-				"Calibrazione",
-				"semplice"
-			],
-			"desc": "Calibra le rilevazioni di temperatura tramite l'utilizzo di acqua calda"
-		},
-		"AdvancedCalibrationMode": {
-			"text2": [
-				"Calibrazione",
-				"avanzata"
-			],
-			"desc": "Calibra le rilevazioni di temperatura attraverso la termocoppia presente nella punta"
+			"desc": "Imposta la velocità di scorrimento del testo [L: lenta; V: veloce]"
 		},
 		"QCMaxVoltage": {
 			"text2": [
 				"Voltaggio",
-				"Quick Charge"
+				"QC"
 			],
-			"desc": "Imposta il massimo voltaggio necessario alla negoziazione con un alimentatore Quick Charge"
+			"desc": "Imposta il massimo voltaggio negoziabile con un alimentatore Quick Charge [volt]"
+		},
+		"PDNegTimeout": {
+			"text2": [
+				"Abilitazione",
+				"USB PD"
+			],
+			"desc": "Regola il massimo tempo utile per la negoziazione del protocollo USB Power Delivery con alimentatori compatibili [0: disattiva; multipli di 100 ms]"
 		},
 		"PowerLimit": {
 			"text2": [
 				"Limite",
 				"potenza"
 			],
-			"desc": "Imposta il valore di potenza massima erogabile al saldatore <watt>"
+			"desc": "Imposta il valore di potenza massima erogabile al saldatore [watt]"
 		},
 		"ReverseButtonTempChange": {
 			"text2": [
@@ -238,42 +246,91 @@
 				"Temp passo",
 				"breve"
 			],
-			"desc": "Imposta il «passo» dei valori di temperatura ad una breve pressione dei tasti"
+			"desc": "Imposta il passo dei valori di temperatura per una breve pressione dei tasti"
 		},
 		"TempChangeLongStep": {
 			"text2": [
 				"Temp passo",
 				"lungo"
 			],
-			"desc": "Imposta il «passo» dei valori di temperatura ad una lunga pressione dei tasti"
+			"desc": "Imposta il passo dei valori di temperatura per una lunga pressione dei tasti"
 		},
 		"PowerPulsePower": {
 			"text2": [
 				"Potenza",
 				"impulso"
 			],
-			"desc": "Regola la potenza d'impulso per prevenire lo standby eventuale dell'alimentatore <watt>"
-		},
-		"TipGain": {
-			"text2": [
-				"Guadagno",
-				"punta"
-			],
-			"desc": "Varia il guadagno della punta"
+			"desc": "Regola la potenza di un \"impulso sveglia\" atto a prevenire lo standby eventuale dell'alimentatore [watt]"
 		},
 		"HallEffSensitivity": {
 			"text2": [
-				"Effetto",
+				"Sensore",
 				"Hall"
 			],
-			"desc": "Regola la sensibilità alla rilevazione di supporti metallici per entrare in modalità Riposo <O: OFF; B: bassa; M: media; A: alta>"
+			"desc": "Regola la sensibilità alla rilevazione di supporti metallici per entrare in modalità Riposo [O: OFF; B: bassa; M: media; A: alta]"
 		},
 		"LockingMode": {
 			"text2": [
 				"Blocco",
 				"tasti"
 			],
-			"desc": "Blocca i tasti durante la modalità Saldatura; tieni premuto entrambi per bloccare/sbloccare <D: disattiva; T: blocca «Turbo»; C: blocco completo>"
+			"desc": "Blocca i tasti durante la modalità Saldatura; tieni premuto entrambi per bloccare o sbloccare [D: disattiva; T: consenti Turbo; C: blocco completo]"
+		},
+		"MinVolCell": {
+			"text2": [
+				"Tensione",
+				"min celle"
+			],
+			"desc": "Modifica la tensione di minima carica delle celle di una batteria Li-Po [3S: 3,0-3,7 V; 4S/5S/6S: 2,4-3,7 V]"
+		},
+		"AnimLoop": {
+			"text2": [
+				"Ciclo",
+				"animazioni"
+			],
+			"desc": "Abilita la riproduzione ciclica delle animazioni del menù principale"
+		},
+		"AnimSpeed": {
+			"text2": [
+				"Velocità",
+				"animazioni"
+			],
+			"desc": "Imposta la velocità di riproduzione delle animazioni del menù principale [O: OFF; L: lenta; M: media; V: veloce]"
+		},
+		"PowerPulseWait": {
+			"text2": [
+				"Distanza",
+				"impulsi"
+			],
+			"desc": "Imposta il tempo che deve intercorrere tra due \"impulsi sveglia\" [multipli di 2,5 s]"
+		},
+		"PowerPulseDuration": {
+			"text2": [
+				"Durata",
+				"impulso"
+			],
+			"desc": "Regola la durata dell'«impulso sveglia» [multipli di 250 ms]"
+		},
+		"LanguageSwitch": {
+			"text2": [
+				"Lingua:",
+				" IT Italiano"
+			],
+			"desc": "Imposta la lingua del dispositivo"
+		},
+		"Brightness": {
+			"text2": [
+				"Luminosità",
+				"schermo"
+			],
+			"desc": "Regola la luminosità dello schermo [1: minimo; 10: massimo]"
+		},
+		"ColourInversion": {
+			"text2": [
+				"Inverti",
+				"colori"
+			],
+			"desc": "Inverti i colori dello schermo"
 		}
 	}
 }

Translations/translation_JA_JP.json

@@ -0,0 +1,214 @@
+{
+  "languageCode": "JA_JP",
+  "languageLocalName": "日本語",
+  "fonts": ["ascii_basic", "cjk"],
+  "tempUnitFahrenheit": true,
+  "messages": {
+    "SettingsCalibrationDone": "校正完了",
+    "SettingsCalibrationWarning": "続行する前に、コテ先が室温と同じになっていることを確認してください",
+    "SettingsResetWarning": "設定をリセットしますか？",
+    "UVLOWarningString": "DC電圧が低すぎます",
+    "UndervoltageString": "電圧不足",
+    "InputVoltageString": "入力電圧 V: ",
+    "WarningTipTempString": "コテ先温度: ",
+    "BadTipString": "コテ先エラー",
+    "SleepingSimpleString": "Zzzz",
+    "SleepingAdvancedString": "スリープ中...",
+    "WarningSimpleString": "高温注意!",
+    "WarningAdvancedString": "!!! コテ先高温 !!!",
+    "SleepingTipAdvancedString": "コテ先:",
+    "IdleTipString": "コテ先:",
+    "IdleSetString": " 設定:",
+    "TipDisconnectedString": "コテ先が接続されていません",
+    "SolderingAdvancedPowerPrompt": "電源: ",
+    "OffString": "オフ",
+    "YourGainMessage": "ゲイン:"
+  },
+  "messagesWarn": {
+    "ResetOKMessage": "リセットOK",
+    "SettingsResetMessage": "初期化されました",
+    "NoAccelerometerMessage": "加速度計未検出",
+    "NoPowerDeliveryMessage": "PD IC未検出",
+    "LockingKeysString": "ボタンロック",
+    "UnlockingKeysString": "ロックを解除",
+    "WarningKeysLockedString": "!入力ロック中!",
+    "WarningThermalRunaway": "過熱"
+  },
+  "characters": {
+    "SettingRightChar": "右",
+    "SettingLeftChar": "左",
+    "SettingAutoChar": "自",
+    "SettingOffChar": "×",
+    "SettingSlowChar": "遅",
+    "SettingMediumChar": "中",
+    "SettingFastChar": "速",
+    "SettingStartNoneChar": "×",
+    "SettingStartSolderingChar": "熱",
+    "SettingStartSleepChar": "待",
+    "SettingStartSleepOffChar": "室",
+    "SettingSensitivityOff": "×",
+    "SettingSensitivityLow": "低",
+    "SettingSensitivityMedium": "中",
+    "SettingSensitivityHigh": "高",
+    "SettingLockDisableChar": "×",
+    "SettingLockBoostChar": "ブ",
+    "SettingLockFullChar": "全",
+    "SettingNAChar": "非適用"
+  },
+  "menuGroups": {
+    "PowerMenu": {
+      "text2": "電源設定",
+      "desc": "電源設定"
+    },
+    "SolderingMenu": {
+      "text2": "半田付け設定",
+      "desc": "半田付け設定"
+    },
+    "PowerSavingMenu": {
+      "text2": "待機設定",
+      "desc": "待機設定"
+    },
+    "UIMenu": {
+      "text2": "UI設定",
+      "desc": "ユーザーインターフェイスの設定"
+    },
+    "AdvancedMenu": {
+      "text2": "高度な設定",
+      "desc": "高度な設定"
+    }
+  },
+  "menuOptions": {
+    "DCInCutoff": {
+      "text2": "下限電圧",
+      "desc": "下限電圧を指定する <DC=10V | S=セルあたり3.3V、電力制限を無効化>"
+    },
+    "SleepTemperature": {
+      "text2": "待機温度",
+      "desc": "スタンバイ時のコテ先温度"
+    },
+    "SleepTimeout": {
+      "text2": "待機遅延",
+      "desc": "スタンバイモードに入るまでの待機時間 <S=秒 | M=分>"
+    },
+    "ShutdownTimeout": {
+      "text2": "自動オフ",
+      "desc": "自動電源オフまでの待機時間 <M=分>"
+    },
+    "MotionSensitivity": {
+      "text2": "動きの感度",
+      "desc": "0=オフ | 1=最低感度 | ... | 9=最高感度"
+    },
+    "TemperatureUnit": {
+      "text2": "温度単位",
+      "desc": "C=摂氏 | F=華氏"
+    },
+    "AdvancedIdle": {
+      "text2": "詳細な待受画面",
+      "desc": "待ち受け画面に詳細情報を表示する"
+    },
+    "DisplayRotation": {
+      "text2": "画面の向き",
+      "desc": "右=右利き | 左=左利き | 自=自動"
+    },
+    "BoostTemperature": {
+      "text2": "ブースト温度",
+      "desc": "ブーストモードで使用される温度"
+    },
+    "AutoStart": {
+      "text2": "自動加熱",
+      "desc": "電源投入時に自動的に加熱する <×=オフ | 熱=半田付けモード | 待=スタンバイモード | 室=室温スタンバイモード>"
+    },
+    "CooldownBlink": {
+      "text2": "冷却中に点滅",
+      "desc": "加熱の停止後、コテ先が熱い間は温度表示を点滅する"
+    },
+    "TemperatureCalibration": {
+      "text2": "温度校正",
+      "desc": "コテ先の温度校正を開始する"
+    },
+    "SettingsReset": {
+      "text2": "設定をリセット",
+      "desc": "すべての設定を初期化する"
+    },
+    "VoltageCalibration": {
+      "text2": "電圧校正",
+      "desc": "入力電圧(VIN)の校正を開始する <長押しで終了>"
+    },
+    "AdvancedSoldering": {
+      "text2": "詳細な作業画面",
+      "desc": "半田付け画面に詳細情報を表示する"
+    },
+    "ScrollingSpeed": {
+      "text2": "スクロール速度",
+      "desc": "テキストをスクロールする速さ <遅=遅い | 速=速い>"
+    },
+    "QCMaxVoltage": {
+      "text2": "QC電圧",
+      "desc": "QC電源使用時に要求する目標電圧"
+    },
+    "PDNegTimeout": {
+      "text2": ["PD", "timeout"],
+      "desc": "一部のQC電源との互換性のため、PDネゴシエーションをタイムアウトする時間 <x100ms（ミリ秒）>"
+    },
+    "PowerLimit": {
+      "text2": "電力制限",
+      "desc": "最大電力を制限する <W=ワット>"
+    },
+    "ReverseButtonTempChange": {
+      "text2": "キー入れ替え",
+      "desc": "温度設定時に+ボタンと-ボタンを入れ替える"
+    },
+    "TempChangeShortStep": {
+      "text2": "温度変化 短",
+      "desc": "ボタンを短く押した時の温度変化値"
+    },
+    "TempChangeLongStep": {
+      "text2": "温度変化 長",
+      "desc": "ボタンを長押しした時の温度変化値"
+    },
+    "PowerPulsePower": {
+      "text2": "電力パルス",
+      "desc": "電源をオンに保つための電力パルス <ワット>"
+    },
+    "HallEffSensitivity": {
+      "text2": "磁界感度",
+      "desc": "スタンバイモードに入るのに使用される磁場センサーの感度 <×=オフ | 低=最低感度 | 中=中程度の感度 | 高=最高感度>"
+    },
+    "LockingMode": {
+      "text2": "ボタンロック",
+      "desc": "半田付けモード時に両方のボタンを長押しし、ボタンロックする <×=オフ | ブ=ブーストのみ許可 | 全=すべてをロック>"
+    },
+    "MinVolCell": {
+      "text2": "最低電圧",
+      "desc": "セルあたりの最低電圧 <ボルト> <3S: 3.0V - 3.7V, 4/5/6S: 2.4V - 3.7V>"
+    },
+    "AnimLoop": {
+      "text2": "動画をループ",
+      "desc": "メニューアイコンのアニメーションをループする"
+    },
+    "AnimSpeed": {
+      "text2": "動画の速度",
+      "desc": "メニューアイコンのアニメーションの速さ <×=再生しない | 遅=低速 | 中=中速 | 速=高速>"
+    },
+    "PowerPulseWait": {
+      "text2": "パルス間隔",
+      "desc": "電源をオンに保つための電力パルスの時間間隔 <x2.5s（秒）>"
+    },
+    "PowerPulseDuration": {
+      "text2": "パルス時間長",
+      "desc": "電源をオンに保つための電力パルスの時間長 <x250ms（ミリ秒）>"
+    },
+    "LanguageSwitch": {
+      "text2": "言語： 日本語",
+      "desc": ""
+    },
+    "Brightness": {
+      "text2": "画面輝度",
+      "desc": "画面の明るさ・コントラストを変更する"
+    },
+    "ColourInversion": {
+      "text2": "色反転",
+      "desc": "画面の色を反転する"
+    }
+  }
+}

Translations/translation_LT.json

@@ -0,0 +1,213 @@
+{
+  "languageCode": "LT",
+  "languageLocalName": "Lietuvių",
+  "fonts": ["ascii_basic", "latin_extended"],
+  "messages": {
+    "SettingsCalibrationDone": "Kalibravimas atliktas!",
+    "SettingsCalibrationWarning": "Prieš tęsdami įsitikinkite, kad antgalis yra kambario temperatūros!",
+    "SettingsResetWarning": "Ar norite atstatyti nustatymus į numatytas reikšmes?",
+    "UVLOWarningString": "MAŽ VOLT",
+    "UndervoltageString": "Žema įtampa",
+    "InputVoltageString": "Įvestis V: ",
+    "WarningTipTempString": "Angal Temp: ",
+    "BadTipString": "BLOG ANT",
+    "SleepingSimpleString": "Zzzz",
+    "SleepingAdvancedString": "Miegu...",
+    "WarningSimpleString": "KRŠ!",
+    "WarningAdvancedString": "ANTGALIS KARŠTAS",
+    "SleepingTipAdvancedString": "Antg: ",
+    "IdleTipString": "Ant:",
+    "IdleSetString": " Nust:",
+    "TipDisconnectedString": "NĖRA ANTGALIO",
+    "SolderingAdvancedPowerPrompt": "Galia: ",
+    "OffString": "Išj",
+    "YourGainMessage": "Greitis:"
+  },
+  "messagesWarn": {
+    "ResetOKMessage": "Atstatytas OK",
+    "SettingsResetMessage": ["Nust. atstatyti!", ""],
+    "NoAccelerometerMessage": ["Nerastas", "akselerometras!"],
+    "NoPowerDeliveryMessage": ["Nerastas", "USB-PD IC !"],
+    "LockingKeysString": " UŽRAKIN",
+    "UnlockingKeysString": "ATRAKIN",
+    "WarningKeysLockedString": "!UŽRAK!",
+    "WarningThermalRunaway": ["Perkaitimo", "pavojus"]
+  },
+  "characters": {
+    "SettingRightChar": "D",
+    "SettingLeftChar": "K",
+    "SettingAutoChar": "A",
+    "SettingOffChar": "I",
+    "SettingSlowChar": "L",
+    "SettingMediumChar": "V",
+    "SettingFastChar": "G",
+    "SettingStartNoneChar": "N",
+    "SettingStartSolderingChar": "T",
+    "SettingStartSleepChar": "M",
+    "SettingStartSleepOffChar": "K",
+    "SettingSensitivityOff": "I",
+    "SettingSensitivityLow": "Ž",
+    "SettingSensitivityMedium": "V",
+    "SettingSensitivityHigh": "A",
+    "SettingLockDisableChar": "I",
+    "SettingLockBoostChar": "T",
+    "SettingLockFullChar": "V",
+    "SettingNAChar": "N/A"
+  },
+  "menuGroups": {
+    "PowerMenu": {
+      "text2": ["Maitinimo", "nustatymai"],
+      "desc": "Su maitinblokiu susiję nustatymai"
+    },
+    "SolderingMenu": {
+      "text2": ["Litavimo", "nustatymai"],
+      "desc": "Litavimo nustatymai"
+    },
+    "PowerSavingMenu": {
+      "text2": ["Miego", "režimai"],
+      "desc": "Energijos tausojimo nustatymai"
+    },
+    "UIMenu": {
+      "text2": ["Naudotojo", "sąsaja"],
+      "desc": "Naudotojo sąsajos nustatymai"
+    },
+    "AdvancedMenu": {
+      "text2": ["Išplėsti.", "nustatymai"],
+      "desc": "Išplėstiniai nustatymai"
+    }
+  },
+  "menuOptions": {
+    "DCInCutoff": {
+      "text2": ["Maitinimo", "šaltinis"],
+      "desc": "Išjungimo įtampa. (DC 10V) (arba celių [S] kiekis [3.3V per celę])"
+    },
+    "SleepTemperature": {
+      "text2": ["Miego", "temperat."],
+      "desc": "Miego temperatūra"
+    },
+    "SleepTimeout": {
+      "text2": ["Miego", "laikas"],
+      "desc": "Užmigimo laikas (sekundės | minutės)"
+    },
+    "ShutdownTimeout": {
+      "text2": ["Išjungimo", "laikas"],
+      "desc": "Išjungimo laikas (minutės)"
+    },
+    "MotionSensitivity": {
+      "text2": ["Judesio", "jautrumas"],
+      "desc": "Judesio jautrumas (0=Išjungta | 1=Mažiausias | ... | 9=Didžiausias)"
+    },
+    "TemperatureUnit": {
+      "text2": ["Temperatūros", "vienetai"],
+      "desc": "Temperatūros vienetai (C=Celsijus | F=Farenheitas)"
+    },
+    "AdvancedIdle": {
+      "text2": ["Detalus lau-", "kimo ekranas"],
+      "desc": "Ar rodyti papildomą informaciją mažesniu šriftu laukimo ekrane"
+    },
+    "DisplayRotation": {
+      "text2": ["Ekrano", "orientacija"],
+      "desc": "Ekrano orientacija (D=Dešiniarankiams | K=Kairiarankiams | A=Automatinė)"
+    },
+    "BoostTemperature": {
+      "text2": ["Turbo", "temperat."],
+      "desc": "Temperatūra turbo režimu"
+    },
+    "AutoStart": {
+      "text2": ["Automatinis", "paleidimas"],
+      "desc": "Ar pradėti kaitininti iš karto įjungus lituoklį (N=Ne | T=Taip | M=Miegas | K=Miegoti kambario temperatūroje)"
+    },
+    "CooldownBlink": {
+      "text2": ["Atvėsimo", "mirksėjimas"],
+      "desc": "Ar mirksėti temperatūrą ekrane kol vėstantis antgalis vis dar karštas?"
+    },
+    "TemperatureCalibration": {
+      "text2": ["Kalibruoti", "temperatūrą?"],
+      "desc": "Antgalio temperatūros kalibravimas"
+    },
+    "SettingsReset": {
+      "text2": ["Atstatyti", "nustatymus?"],
+      "desc": "Nustato nustatymus į numatytuosius"
+    },
+    "VoltageCalibration": {
+      "text2": ["Kalibruoti", "įvesties įtampą?"],
+      "desc": "Įvesties įtampos kalibravimas. Trumpai paspauskite, norėdami nustatyti, ilgai paspauskite, kad išeitumėte."
+    },
+    "AdvancedSoldering": {
+      "text2": ["Detalus lita-", "vimo ekranas"],
+      "desc": "Ar rodyti išsamią informaciją lituojant"
+    },
+    "ScrollingSpeed": {
+      "text2": ["Aprašymo", "greitis"],
+      "desc": "Greitis, kuriuo šis tekstas slenka"
+    },
+    "QCMaxVoltage": {
+      "text2": ["QC mait.", "įtampa"],
+      "desc": "Maksimali QC maitinimo bloko įtampa"
+    },
+    "PDNegTimeout": {
+      "text2": ["PD", "timeout"],
+      "desc": "PD negotiation timeout in 100ms steps for compatibility with some QC chargers (0: disabled)"
+    },
+    "PowerLimit": {
+      "text2": ["Galios", "riba"],
+      "desc": "Didžiausia galia, kurią gali naudoti lituoklis (Vatai)"
+    },
+    "ReverseButtonTempChange": {
+      "text2": ["Sukeisti + -", "mygtukus?"],
+      "desc": "Sukeisti + - temperatūros keitimo mygtukus vietomis."
+    },
+    "TempChangeShortStep": {
+      "text2": ["Temp.keitim.", "trump.spust."],
+      "desc": "Temperatūros keitimo žingsnis trumpai spustėlėjus mygtuką!"
+    },
+    "TempChangeLongStep": {
+      "text2": ["Temp.keitim.", "ilgas pasp."],
+      "desc": "Temperatūros keitimo žingsnis ilgai paspaudus mygtuką!"
+    },
+    "PowerPulsePower": {
+      "text2": ["Galios", "pulso W"],
+      "desc": "Periodinis galios pulso intensyvumas maitinblokiui, neleidžiantis jam užmigti."
+    },
+    "HallEffSensitivity": {
+      "text2": ["Holo", "jutiklis"],
+      "desc": "Holo jutiklio jautrumas nustatant miegą (I=Išjungtas | Ž=Žemas | V=Vidutinis | A=Aukštas)"
+    },
+    "LockingMode": {
+      "text2": ["Mygtukų", "užraktas"],
+      "desc": "Lituodami, ilgai paspauskite abu mygtukus, kad juos užrakintumėte (I=Išjungta | T=leidžiamas tik Turbo režimas | V=Visiškas užrakinimas)"
+    },
+    "MinVolCell": {
+      "text2": ["Minimalus", "voltažas"],
+      "desc": "Minimalus voltažas, kuris yra leidžiamas kiekvienam baterijos elementui (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)"
+    },
+    "AnimLoop": {
+      "text2": ["Animacijų", "pakartojimas"],
+      "desc": "Leidžia kartoti animacijas be sustojimo pagrindiniame meniu."
+    },
+    "AnimSpeed": {
+      "text2": ["Animacijų", "greitis"],
+      "desc": "Paveiksliukų animacijų greitis meniu punktuose (I=Išjungtas | L=Lėtas | V=Vidutinis | G=Greitas)"
+    },
+    "PowerPulseWait": {
+      "text2": ["Galios pulso", "dažnumas"],
+      "desc": "Pasikartojantis laiko intervalas (x 2.5s), ties kuriuo kartojamas galios pulsas maitinblokiui, neleidžiantis jam užmigti."
+    },
+    "PowerPulseDuration": {
+      "text2": ["Galios pulso", "trukmė"],
+      "desc": "Galios pulso aktyvioji trukmė (x 250ms)"
+    },
+    "LanguageSwitch": {
+      "text2": ["Kalba:", " LT    Lietuvių"],
+      "desc": ""
+    },
+    "Brightness": {
+      "text2": ["Ekrano", "šviesumas"],
+      "desc": "Nustato OLED ekrano kontrastą/šviesumą."
+    },
+    "ColourInversion": {
+      "text2": ["Ekrano", "invertavimas"],
+      "desc": "Invertuoja OLED ekrano spalvas."
+    }
+  }
+}

Translations/translation_NL.json

@@ -0,0 +1,213 @@
+{
+  "languageCode": "NL",
+  "languageLocalName": "Nederlands",
+  "fonts": ["ascii_basic", "latin_extended"],
+  "messages": {
+    "SettingsCalibrationDone": "Calibratie klaar!",
+    "SettingsCalibrationWarning": "Zorg ervoor dat te punt op kamertemperatuur is voor je verder gaat!",
+    "SettingsResetWarning": "Weet je zeker dat je de fabrieksinstellingen terug wil zetten?",
+    "UVLOWarningString": "DC Laag",
+    "UndervoltageString": "Onderspanning",
+    "InputVoltageString": "Input V: ",
+    "WarningTipTempString": "Punt temp: ",
+    "BadTipString": "DEFECTE PUNT",
+    "SleepingSimpleString": "Zzzz",
+    "SleepingAdvancedString": "Slaapstand...",
+    "WarningSimpleString": "HEET!",
+    "WarningAdvancedString": "!!! PUNT HOT !!!",
+    "SleepingTipAdvancedString": "Punt:",
+    "IdleTipString": "Punt:",
+    "IdleSetString": " Zet:",
+    "TipDisconnectedString": "PUNT LOSGEKOPPELT",
+    "SolderingAdvancedPowerPrompt": "Vermogen: ",
+    "OffString": "Uit",
+    "YourGainMessage": "Niveau:"
+  },
+  "messagesWarn": {
+    "ResetOKMessage": "Reset OK",
+    "SettingsResetMessage": ["Instellingen", "zijn gereset!"],
+    "NoAccelerometerMessage": ["No accelerometer", "detected!"],
+    "NoPowerDeliveryMessage": ["No USB-PD IC", "detected!"],
+    "LockingKeysString": " GEBLOKKEERD",
+    "UnlockingKeysString": "GEDEBLOKKEERD",
+    "WarningKeysLockedString": "!GEBLOKKEERD!",
+    "WarningThermalRunaway": ["Thermal", "Runaway"]
+  },
+  "characters": {
+    "SettingRightChar": "R",
+    "SettingLeftChar": "L",
+    "SettingAutoChar": "A",
+    "SettingOffChar": "O",
+    "SettingSlowChar": "S",
+    "SettingMediumChar": "M",
+    "SettingFastChar": "F",
+    "SettingStartNoneChar": "F",
+    "SettingStartSolderingChar": "T",
+    "SettingStartSleepChar": "S",
+    "SettingStartSleepOffChar": "K",
+    "SettingSensitivityOff": "O",
+    "SettingSensitivityLow": "L",
+    "SettingSensitivityMedium": "M",
+    "SettingSensitivityHigh": "H",
+    "SettingLockDisableChar": "U",
+    "SettingLockBoostChar": "B",
+    "SettingLockFullChar": "V",
+    "SettingNAChar": "N/A"
+  },
+  "menuGroups": {
+    "PowerMenu": {
+      "text2": ["Power", "settings"],
+      "desc": "Power settings"
+    },
+    "SolderingMenu": {
+      "text2": ["Soldeer", "Instellingen"],
+      "desc": "Soldeer instellingen"
+    },
+    "PowerSavingMenu": {
+      "text2": ["Slaap", "Modes"],
+      "desc": "Stroom besparings instellingen"
+    },
+    "UIMenu": {
+      "text2": ["Gebruikers-", "interface"],
+      "desc": "Gebruikers-interface instellingen"
+    },
+    "AdvancedMenu": {
+      "text2": ["Geavanceerde", "Instellingen"],
+      "desc": "Geavanceerde Instellingen"
+    }
+  },
+  "menuOptions": {
+    "DCInCutoff": {
+      "text2": ["Spannings-", "bron"],
+      "desc": "Spanningsbron. Stelt drempelspanning in. (DC 10V) (S 3.3V per cel)"
+    },
+    "SleepTemperature": {
+      "text2": ["Slaap", "temp"],
+      "desc": "Temperatuur in slaapstand"
+    },
+    "SleepTimeout": {
+      "text2": ["Slaap", "time-out"],
+      "desc": "Slaap time-out (Minuten | Seconden)"
+    },
+    "ShutdownTimeout": {
+      "text2": ["Uitschakel", "time-out"],
+      "desc": "Automatisch afsluiten time-out (Minuten)"
+    },
+    "MotionSensitivity": {
+      "text2": ["Bewegings-", "gevoeligheid"],
+      "desc": "Bewegingsgevoeligheid (0=uit | 1=minst gevoelig | ... | 9=meest gevoelig)"
+    },
+    "TemperatureUnit": {
+      "text2": ["Temperatuur", "eenheid"],
+      "desc": "Temperatuureenheid (C=Celsius | F=Fahrenheit)"
+    },
+    "AdvancedIdle": {
+      "text2": ["Gedetailleerd", "startscherm"],
+      "desc": "Gedetailleerde informatie weergeven in een kleiner lettertype op het startscherm."
+    },
+    "DisplayRotation": {
+      "text2": ["Scherm-", "oriëntatie"],
+      "desc": "Schermoriëntatie (R=Rechtshandig | L=Linkshandig | A=Automatisch)"
+    },
+    "BoostTemperature": {
+      "text2": ["Boost", "temp"],
+      "desc": "Temperatuur in boostmode"
+    },
+    "AutoStart": {
+      "text2": ["Auto", "start"],
+      "desc": "Breng de soldeerbout direct op temperatuur bij het opstarten. (F=Uit | T=Soldeertemperatuur | S=Slaapstand-temperatuur | K=Slaapstand kamertemperatuur)"
+    },
+    "CooldownBlink": {
+      "text2": ["Afkoel", "flikker"],
+      "desc": "Temperatuur laten flikkeren in het hoofdmenu als de soldeerpunt aan het afkoelen is."
+    },
+    "TemperatureCalibration": {
+      "text2": ["Calibreer", "temperatuur?"],
+      "desc": "Temperatuursafwijking van de soldeerpunt calibreren."
+    },
+    "SettingsReset": {
+      "text2": ["Instellingen", "resetten?"],
+      "desc": "Alle instellingen terugzetten."
+    },
+    "VoltageCalibration": {
+      "text2": ["Calibreer", "input-voltage?"],
+      "desc": "VIN Calibreren. (druk lang om te sluiten)."
+    },
+    "AdvancedSoldering": {
+      "text2": ["Gedetailleerd", "soldeerscherm"],
+      "desc": "Gedetailleerde informatie weergeven in een kleiner lettertype op het soldeerscherm."
+    },
+    "ScrollingSpeed": {
+      "text2": ["Scroll", "snelheid"],
+      "desc": "Snelheid waarmee de tekst scrolt."
+    },
+    "QCMaxVoltage": {
+      "text2": ["Power", "Wattage"],
+      "desc": "Wattage van de gebruikte voeding"
+    },
+    "PDNegTimeout": {
+      "text2": ["PD", "timeout"],
+      "desc": "PD negotiation timeout in 100ms steps for compatibility with some QC chargers (0: disabled)"
+    },
+    "PowerLimit": {
+      "text2": ["Vermogen", "limiet"],
+      "desc": "Maximaal vermogen (Watts)"
+    },
+    "ReverseButtonTempChange": {
+      "text2": ["Draai", "+ - knoppen om"],
+      "desc": "Keer de +- knoppen om de termperatuur van de punt te regelen om."
+    },
+    "TempChangeShortStep": {
+      "text2": ["Temp veranderen", "kort"],
+      "desc": "Temperatuur verandering bij kort drukken"
+    },
+    "TempChangeLongStep": {
+      "text2": ["Temp veranderen", "lang"],
+      "desc": "Temperatuur verandering bij lang drukken"
+    },
+    "PowerPulsePower": {
+      "text2": ["Vermogen", "Puls W"],
+      "desc": "Vermogen van puls om soldeerbout aan te houden"
+    },
+    "HallEffSensitivity": {
+      "text2": ["Hall Eff", "Sensitivity"],
+      "desc": "Sensitivity of the Hall effect sensor in detecting sleep (O=Off | L=Low | M=Medium | H=High)"
+    },
+    "LockingMode": {
+      "text2": ["Blokkeer", "knoppen"],
+      "desc": "Tijdens solderen lang op beide knoppen drukken, blokkeert ze. (U=Uit | B=Alleen boost | V=Volledig blokkeren)"
+    },
+    "MinVolCell": {
+      "text2": ["Minimum", "voltage"],
+      "desc": "Minimum allowed voltage per cell (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)"
+    },
+    "AnimLoop": {
+      "text2": ["Anim.", "loop"],
+      "desc": "Loop icon animations in root menu"
+    },
+    "AnimSpeed": {
+      "text2": ["Anim.", "speed"],
+      "desc": "Speed of icon animations in menu (O=off | L=low | M=medium | H=high)"
+    },
+    "PowerPulseWait": {
+      "text2": ["Power pulse", "wait time"],
+      "desc": "Time to wait before triggering every keep-awake pulse (x 2.5s)"
+    },
+    "PowerPulseDuration": {
+      "text2": ["Power pulse", "duration"],
+      "desc": "Keep-awake-pulse duration (x 250ms)"
+    },
+    "LanguageSwitch": {
+      "text2": ["Spraak :", " NL  Nederlands"],
+      "desc": ""
+    },
+    "Brightness": {
+      "text2": ["Screen", "Brightness"],
+      "desc": "Adjust the contrast/brightness of the OLED screen"
+    },
+    "ColourInversion": {
+      "text2": ["Screen", "Invert"],
+      "desc": "Invert the colours of the OLED screen"
+    }
+  }
+}

Translations/translation_NL_BE.json

@@ -0,0 +1,213 @@
+{
+  "languageCode": "NL_BE",
+  "languageLocalName": "Vlaams",
+  "fonts": ["ascii_basic", "latin_extended"],
+  "messages": {
+    "SettingsCalibrationDone": "Gecalibreerd!",
+    "SettingsCalibrationWarning": "Zorg vooraf dat de punt op kamertemperatuur is!",
+    "SettingsResetWarning": "Ben je zeker dat je alle standaardwaarden wil resetten?",
+    "UVLOWarningString": "Voedingsspanning LAAG",
+    "UndervoltageString": "Onderspanning",
+    "InputVoltageString": "Voedingsspanning: ",
+    "WarningTipTempString": "Punt Temp: ",
+    "BadTipString": "DEFECT",
+    "SleepingSimpleString": "Zzz ",
+    "SleepingAdvancedString": "Slaapstand...",
+    "WarningSimpleString": "HEET",
+    "WarningAdvancedString": "!!! PUNT HEET !!!",
+    "SleepingTipAdvancedString": "Punt:",
+    "IdleTipString": "Punt:",
+    "IdleSetString": "Stel in:",
+    "TipDisconnectedString": "Punt ONTKOPPELD",
+    "SolderingAdvancedPowerPrompt": "Vermogen: ",
+    "OffString": "Uit",
+    "YourGainMessage": "Your gain:"
+  },
+  "messagesWarn": {
+    "ResetOKMessage": "Reset OK",
+    "SettingsResetMessage": ["Settings were", "reset!"],
+    "NoAccelerometerMessage": ["No accelerometer", "detected!"],
+    "NoPowerDeliveryMessage": ["No USB-PD IC", "detected!"],
+    "LockingKeysString": " LOCKED",
+    "UnlockingKeysString": "UNLOCKED",
+    "WarningKeysLockedString": "!LOCKED!",
+    "WarningThermalRunaway": ["Thermal", "Runaway"]
+  },
+  "characters": {
+    "SettingRightChar": "R",
+    "SettingLeftChar": "L",
+    "SettingAutoChar": "A",
+    "SettingOffChar": "O",
+    "SettingSlowChar": "T",
+    "SettingMediumChar": "M",
+    "SettingFastChar": "S",
+    "SettingStartNoneChar": "F",
+    "SettingStartSolderingChar": "T",
+    "SettingStartSleepChar": "S",
+    "SettingStartSleepOffChar": "K",
+    "SettingSensitivityOff": "O",
+    "SettingSensitivityLow": "L",
+    "SettingSensitivityMedium": "M",
+    "SettingSensitivityHigh": "H",
+    "SettingLockDisableChar": "D",
+    "SettingLockBoostChar": "B",
+    "SettingLockFullChar": "F",
+    "SettingNAChar": "N/A"
+  },
+  "menuGroups": {
+    "PowerMenu": {
+      "text2": ["Power", "settings"],
+      "desc": "Power settings"
+    },
+    "SolderingMenu": {
+      "text2": ["Soldeer", "Instellingen"],
+      "desc": "Soldeerinstellingen"
+    },
+    "PowerSavingMenu": {
+      "text2": ["Slaap", "standen"],
+      "desc": "Batterijspaarstanden"
+    },
+    "UIMenu": {
+      "text2": ["Gebruikers-", "Interface"],
+      "desc": "Gebruikersinterface Instellingen"
+    },
+    "AdvancedMenu": {
+      "text2": ["Gevorderde", "Instellingen"],
+      "desc": "Gevorderde Instellingen"
+    }
+  },
+  "menuOptions": {
+    "DCInCutoff": {
+      "text2": ["Spannings-", "bron"],
+      "desc": "Spanningsbron. Stelt minimumspanning in. (DC 10V) (S 3.3V per cel)"
+    },
+    "SleepTemperature": {
+      "text2": ["Slaap", "temp"],
+      "desc": "Temperatuur in slaapstand (°C)"
+    },
+    "SleepTimeout": {
+      "text2": ["Slaap", "time-out"],
+      "desc": "Slaapstand time-out (Minuten | Seconden)"
+    },
+    "ShutdownTimeout": {
+      "text2": ["Uitschakel", "time-out"],
+      "desc": "Automatisch afsluiten time-out (Minuten)"
+    },
+    "MotionSensitivity": {
+      "text2": ["Bewegings-", "gevoeligheid"],
+      "desc": "Bewegingsgevoeligheid (0=uit | 1=minst gevoelig | ... | 9=meest gevoelig)"
+    },
+    "TemperatureUnit": {
+      "text2": ["Temperatuur", "schaal"],
+      "desc": "Temperatuurschaal (°C=Celsius | °F=Fahrenheit)"
+    },
+    "AdvancedIdle": {
+      "text2": ["Gedetailleerd", "slaapscherm"],
+      "desc": "Gedetailleerde informatie in een kleiner lettertype in het slaapscherm."
+    },
+    "DisplayRotation": {
+      "text2": ["Scherm-", "oriëntatie"],
+      "desc": "Schermoriëntatie (R=Rechtshandig | L=Linkshandig | A=Automatisch)"
+    },
+    "BoostTemperature": {
+      "text2": ["Verhogings", "temp"],
+      "desc": "Verhogingstemperatuur"
+    },
+    "AutoStart": {
+      "text2": ["Auto", "start"],
+      "desc": "Breng de soldeerbout op temperatuur bij het opstarten. (F=Uit | T=Soldeertemperatuur | S=Slaapstand-temperatuur | K=Slaapstand kamertemperatuur)"
+    },
+    "CooldownBlink": {
+      "text2": ["Afkoel", "knipper"],
+      "desc": "Temperatuur knippert in hoofdmenu tijdens afkoeling."
+    },
+    "TemperatureCalibration": {
+      "text2": ["Calibreer", "temperatuur?"],
+      "desc": "Temperatuur van de punt calibreren."
+    },
+    "SettingsReset": {
+      "text2": ["Instellingen", "resetten?"],
+      "desc": "Alle instellingen resetten."
+    },
+    "VoltageCalibration": {
+      "text2": ["Calibreer", "voedingsspanning?"],
+      "desc": "VIN Calibreren. Bevestigen door knoppen lang in te drukken."
+    },
+    "AdvancedSoldering": {
+      "text2": ["Gedetailleerd", "soldeerscherm"],
+      "desc": "Gedetailleerde informatie in kleiner lettertype in soldeerscherm."
+    },
+    "ScrollingSpeed": {
+      "text2": ["Scrol", "snelheid"],
+      "desc": "Scrolsnelheid van de tekst."
+    },
+    "QCMaxVoltage": {
+      "text2": ["Vermogen", "Watt"],
+      "desc": "Vermogen van de adapter"
+    },
+    "PDNegTimeout": {
+      "text2": ["PD", "timeout"],
+      "desc": "PD negotiation timeout in 100ms steps for compatibility with some QC chargers (0: disabled)"
+    },
+    "PowerLimit": {
+      "text2": ["Power", "Limit"],
+      "desc": "Maximum power the iron can use (Watts)"
+    },
+    "ReverseButtonTempChange": {
+      "text2": ["Key +-", "reverse?"],
+      "desc": "Reverse the tip temperature change buttons plus minus assignment."
+    },
+    "TempChangeShortStep": {
+      "text2": ["Temp change", "short?"],
+      "desc": "Temperature change steps on short button press!"
+    },
+    "TempChangeLongStep": {
+      "text2": ["Temp change", "long?"],
+      "desc": "Temperature change steps on long button press!"
+    },
+    "PowerPulsePower": {
+      "text2": ["Power", "Pulse W"],
+      "desc": "Keep awake pulse power intensity"
+    },
+    "HallEffSensitivity": {
+      "text2": ["Hall Eff", "Sensitivity"],
+      "desc": "Sensitivity of the Hall effect sensor in detecting sleep (O=Off | L=Low | M=Medium | H=High)"
+    },
+    "LockingMode": {
+      "text2": ["Allow buttons", "locking"],
+      "desc": "When soldering, long press on both buttons lock them (D=Disable | B=Boost only | F=Full locking)"
+    },
+    "MinVolCell": {
+      "text2": ["Minimum", "voltage"],
+      "desc": "Minimum allowed voltage per cell (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)"
+    },
+    "AnimLoop": {
+      "text2": ["Anim.", "loop"],
+      "desc": "Loop icon animations in root menu"
+    },
+    "AnimSpeed": {
+      "text2": ["Anim.", "speed"],
+      "desc": "Speed of icon animations in menu (O=off | L=low | M=medium | H=high)"
+    },
+    "PowerPulseWait": {
+      "text2": ["Power pulse", "wait time"],
+      "desc": "Time to wait before triggering every keep-awake pulse (x 2.5s)"
+    },
+    "PowerPulseDuration": {
+      "text2": ["Power pulse", "duration"],
+      "desc": "Keep-awake-pulse duration (x 250ms)"
+    },
+    "LanguageSwitch": {
+      "text2": ["Spraak:", " NL_BE   Vlaams"],
+      "desc": ""
+    },
+    "Brightness": {
+      "text2": ["Screen", "Brightness"],
+      "desc": "Adjust the contrast/brightness of the OLED screen"
+    },
+    "ColourInversion": {
+      "text2": ["Screen", "Invert"],
+      "desc": "Invert the colours of the OLED screen"
+    }
+  }
+}

Translations/translation_NO.json

@@ -0,0 +1,213 @@
+{
+  "languageCode": "NO",
+  "languageLocalName": "Norsk",
+  "fonts": ["ascii_basic", "latin_extended"],
+  "messages": {
+    "SettingsCalibrationDone": "Calibration done!",
+    "SettingsCalibrationWarning": "Sørg for at loddespissen har romtemperatur før du fortsetter!",
+    "SettingsResetWarning": "Er du sikker på at du vil tilbakestille til standardinnstillinger?",
+    "UVLOWarningString": "Lavspenn",
+    "UndervoltageString": "Underspenning",
+    "InputVoltageString": "Innspenn.: ",
+    "WarningTipTempString": "Spisstemp: ",
+    "BadTipString": "BAD TIP",
+    "SleepingSimpleString": "Zzzz",
+    "SleepingAdvancedString": "Dvale...",
+    "WarningSimpleString": "Varm",
+    "WarningAdvancedString": "VARM SPISS!",
+    "SleepingTipAdvancedString": "Spiss:",
+    "IdleTipString": "Spiss:",
+    "IdleSetString": "Set:",
+    "TipDisconnectedString": "SPISS FRAKOBLET",
+    "SolderingAdvancedPowerPrompt": "Effekt: ",
+    "OffString": "Av",
+    "YourGainMessage": "Your gain:"
+  },
+  "messagesWarn": {
+    "ResetOKMessage": "Reset OK",
+    "SettingsResetMessage": ["Settings were", "reset!"],
+    "NoAccelerometerMessage": ["No accelerometer", "detected!"],
+    "NoPowerDeliveryMessage": ["No USB-PD IC", "detected!"],
+    "LockingKeysString": " LOCKED",
+    "UnlockingKeysString": "UNLOCKED",
+    "WarningKeysLockedString": "!LOCKED!",
+    "WarningThermalRunaway": ["Thermal", "Runaway"]
+  },
+  "characters": {
+    "SettingRightChar": "H",
+    "SettingLeftChar": "V",
+    "SettingAutoChar": "A",
+    "SettingOffChar": "O",
+    "SettingSlowChar": "L",
+    "SettingMediumChar": "M",
+    "SettingFastChar": "H",
+    "SettingStartNoneChar": "I",
+    "SettingStartSolderingChar": "L",
+    "SettingStartSleepChar": "D",
+    "SettingStartSleepOffChar": "R",
+    "SettingSensitivityOff": "O",
+    "SettingSensitivityLow": "L",
+    "SettingSensitivityMedium": "M",
+    "SettingSensitivityHigh": "H",
+    "SettingLockDisableChar": "D",
+    "SettingLockBoostChar": "B",
+    "SettingLockFullChar": "F",
+    "SettingNAChar": "N/A"
+  },
+  "menuGroups": {
+    "PowerMenu": {
+      "text2": ["Power", "settings"],
+      "desc": "Power settings"
+    },
+    "SolderingMenu": {
+      "text2": ["Lodde-", "innst."],
+      "desc": "Loddeinnstillinger"
+    },
+    "PowerSavingMenu": {
+      "text2": ["Dvale-", "innst."],
+      "desc": "Dvaleinnstillinger"
+    },
+    "UIMenu": {
+      "text2": ["Bruker-", "grensesn."],
+      "desc": "Brukergrensesnitt-innstillinger"
+    },
+    "AdvancedMenu": {
+      "text2": ["Avanserte", "valg"],
+      "desc": "Avanserte valg"
+    }
+  },
+  "menuOptions": {
+    "DCInCutoff": {
+      "text2": ["Kilde", ""],
+      "desc": "Strømforsyning. Sett nedre spenning for automatisk nedstenging. (DC 10V) (S 3.3V per celle)"
+    },
+    "SleepTemperature": {
+      "text2": ["DTmp", ""],
+      "desc": "Dvaletemperatur (C)"
+    },
+    "SleepTimeout": {
+      "text2": ["DTid", ""],
+      "desc": "Tid før dvale (Minutter | Sekunder)"
+    },
+    "ShutdownTimeout": {
+      "text2": ["AvTid", ""],
+      "desc": "Tid før automatisk nedstenging (Minutter)"
+    },
+    "MotionSensitivity": {
+      "text2": ["BSensr", ""],
+      "desc": "Bevegelsesfølsomhet (0=Inaktiv | 1=Minst følsom | ... | 9=Mest følsom)"
+    },
+    "TemperatureUnit": {
+      "text2": ["TmpEnh", ""],
+      "desc": "Temperaturskala (C=Celsius | F=Fahrenheit)"
+    },
+    "AdvancedIdle": {
+      "text2": ["AvDvSk", ""],
+      "desc": "Vis detaljert informasjon med liten skrift på dvaleskjermen."
+    },
+    "DisplayRotation": {
+      "text2": ["SkRetn", ""],
+      "desc": "Skjermretning (H=Høyrehendt | V=Venstrehendt | A=Automatisk)"
+    },
+    "BoostTemperature": {
+      "text2": ["KTmp", ""],
+      "desc": "Temperatur i \"kraft\"-modus"
+    },
+    "AutoStart": {
+      "text2": ["AStart", ""],
+      "desc": "Start automatisk med lodding når strøm kobles til. (I=Inaktiv | L=Lodding | D=Dvale | R=Dvale romtemperatur)"
+    },
+    "CooldownBlink": {
+      "text2": ["KjBlnk", ""],
+      "desc": "Blink temperaturen på skjermen mens spissen fortsatt er varm."
+    },
+    "TemperatureCalibration": {
+      "text2": ["TempKal?", ""],
+      "desc": "Kalibrer spiss-temperatur."
+    },
+    "SettingsReset": {
+      "text2": ["TilbStl?", ""],
+      "desc": "Tilbakestill alle innstillinger"
+    },
+    "VoltageCalibration": {
+      "text2": ["KalSpIn?", ""],
+      "desc": "Kalibrer spenning. Knappene justerer. Langt trykk for å gå ut"
+    },
+    "AdvancedSoldering": {
+      "text2": ["AvLdSk", ""],
+      "desc": "Vis detaljert informasjon ved lodding"
+    },
+    "ScrollingSpeed": {
+      "text2": ["RullHa", ""],
+      "desc": "Hastigheten på rulletekst"
+    },
+    "QCMaxVoltage": {
+      "text2": ["Power", "Wattage"],
+      "desc": "Power Wattage of the power adapter used"
+    },
+    "PDNegTimeout": {
+      "text2": ["PD", "timeout"],
+      "desc": "PD negotiation timeout in 100ms steps for compatibility with some QC chargers (0: disabled)"
+    },
+    "PowerLimit": {
+      "text2": ["Power", "Limit"],
+      "desc": "Maximum power the iron can use (Watts)"
+    },
+    "ReverseButtonTempChange": {
+      "text2": ["Key +-", "reverse?"],
+      "desc": "Reverse the tip temperature change buttons plus minus assignment."
+    },
+    "TempChangeShortStep": {
+      "text2": ["Temp change", "short?"],
+      "desc": "Temperature change steps on short button press!"
+    },
+    "TempChangeLongStep": {
+      "text2": ["Temp change", "long?"],
+      "desc": "Temperature change steps on long button press!"
+    },
+    "PowerPulsePower": {
+      "text2": ["Power", "Pulse W"],
+      "desc": "Keep awake pulse power intensity"
+    },
+    "HallEffSensitivity": {
+      "text2": ["Hall Eff", "Sensitivity"],
+      "desc": "Sensitivity of the Hall effect sensor in detecting sleep (O=Off | L=Low | M=Medium | H=High)"
+    },
+    "LockingMode": {
+      "text2": ["Allow buttons", "locking"],
+      "desc": "When soldering, long press on both buttons lock them (D=Disable | B=Boost only | F=Full locking)"
+    },
+    "MinVolCell": {
+      "text2": ["Minimum", "voltage"],
+      "desc": "Minimum allowed voltage per cell (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)"
+    },
+    "AnimLoop": {
+      "text2": ["Anim.", "loop"],
+      "desc": "Loop icon animations in root menu"
+    },
+    "AnimSpeed": {
+      "text2": ["Anim.", "speed"],
+      "desc": "Speed of icon animations in menu (O=off | L=low | M=medium | H=high)"
+    },
+    "PowerPulseWait": {
+      "text2": ["Power pulse", "wait time"],
+      "desc": "Time to wait before triggering every keep-awake pulse (x 2.5s)"
+    },
+    "PowerPulseDuration": {
+      "text2": ["Power pulse", "duration"],
+      "desc": "Keep-awake-pulse duration (x 250ms)"
+    },
+    "LanguageSwitch": {
+      "text2": ["Språk:", " NO       Norsk"],
+      "desc": ""
+    },
+    "Brightness": {
+      "text2": ["Screen", "Brightness"],
+      "desc": "Adjust the contrast/brightness of the OLED screen"
+    },
+    "ColourInversion": {
+      "text2": ["Screen", "Invert"],
+      "desc": "Invert the colours of the OLED screen"
+    }
+  }
+}

Translations/translation_PL.json

@@ -0,0 +1,214 @@
+{
+  "languageCode": "PL",
+  "languageLocalName": "Polski",
+  "fonts": ["ascii_basic", "latin_extended"],
+  "tempUnitFahrenheit": false,
+  "messages": {
+    "SettingsCalibrationDone": "Kalibracja udana!",
+    "SettingsCalibrationWarning": "Przed kontynuowaniem upewnij się, że końcówka osiągnęła temperaturę pokojową!",
+    "SettingsResetWarning": "Czy na pewno chcesz przywrócić ustawienia fabryczne?",
+    "UVLOWarningString": "NIS. NAP",
+    "UndervoltageString": "Zbyt niskie nap.",
+    "InputVoltageString": "Nap. wej.:",
+    "WarningTipTempString": "Temp. grotu:",
+    "BadTipString": "ZŁY GROT",
+    "SleepingSimpleString": "Zzz!",
+    "SleepingAdvancedString": "Tr. uśpienia",
+    "WarningSimpleString": "HOT!",
+    "WarningAdvancedString": "GORĄCA KOŃCÓWKA!",
+    "SleepingTipAdvancedString": "Grot:",
+    "IdleTipString": "Grot:",
+    "IdleSetString": " Ust:",
+    "TipDisconnectedString": "GROT ODŁĄCZONY",
+    "SolderingAdvancedPowerPrompt": "Moc: ",
+    "OffString": "Wył",
+    "YourGainMessage": "Us.zysk:"
+  },
+  "messagesWarn": {
+    "ResetOKMessage": "Reset OK",
+    "SettingsResetMessage": ["Ust. zresetowane", ""],
+    "NoAccelerometerMessage": ["Nie rozpoznano", "akcelerometru!"],
+    "NoPowerDeliveryMessage": ["Nie rozpoznano", "kont. USB-PD IC!"],
+    "LockingKeysString": " ZABLOK.",
+    "UnlockingKeysString": "ODBLOK.",
+    "WarningKeysLockedString": "!ZABLOK!",
+    "WarningThermalRunaway": ["Ucieczka", "termiczna"]
+  },
+  "characters": {
+    "SettingRightChar": "P",
+    "SettingLeftChar": "L",
+    "SettingAutoChar": "A",
+    "SettingOffChar": "O",
+    "SettingSlowChar": "W",
+    "SettingMediumChar": "M",
+    "SettingFastChar": "S",
+    "SettingStartNoneChar": "B",
+    "SettingStartSolderingChar": "T",
+    "SettingStartSleepChar": "Z",
+    "SettingStartSleepOffChar": "O",
+    "SettingSensitivityOff": "O",
+    "SettingSensitivityLow": "N",
+    "SettingSensitivityMedium": "Ś",
+    "SettingSensitivityHigh": "W",
+    "SettingLockDisableChar": "W",
+    "SettingLockBoostChar": "B",
+    "SettingLockFullChar": "P",
+    "SettingNAChar": "N/D"
+  },
+  "menuGroups": {
+    "PowerMenu": {
+      "text2": ["Ustawienia", "zasilania"],
+      "desc": "Zasilanie i minimalne napięcie na komórkę"
+    },
+    "SolderingMenu": {
+      "text2": ["Lutowanie", ""],
+      "desc": "Ustawienia trybu lutowania"
+    },
+    "PowerSavingMenu": {
+      "text2": ["Oszcz.", "energii"],
+      "desc": "Ustawienia oszczędzania energii"
+    },
+    "UIMenu": {
+      "text2": ["Interfejs", "użytkownika"],
+      "desc": "Ustawienia interfejsu użytkownika"
+    },
+    "AdvancedMenu": {
+      "text2": ["Ustawienia", "zaawans."],
+      "desc": "Ustawienia zaawansowane"
+    }
+  },
+  "menuOptions": {
+    "DCInCutoff": {
+      "text2": ["Źródło", "zasilania"],
+      "desc": "Źródło zasilania. Ustaw napięcie odcięcia. (DC 10V) (S 3.3V dla ogniw Li, wyłącz limit mocy)"
+    },
+    "SleepTemperature": {
+      "text2": ["Temp.", "uśpienia"],
+      "desc": "Temperatura w trybie uśpienia (°C)"
+    },
+    "SleepTimeout": {
+      "text2": ["Czas do", "uśpienia"],
+      "desc": "Czas do przejścia w tryb uśpienia (minuty | sekundy)"
+    },
+    "ShutdownTimeout": {
+      "text2": ["Czas do", "wyłączenia"],
+      "desc": "Czas do wyłączenia (minuty)"
+    },
+    "MotionSensitivity": {
+      "text2": ["Czułość", "wykr. ruchu"],
+      "desc": "Czułość wykrywania ruchu (0: Wyłączona | 1: Minimalna | ... | 9: Maksymalna)"
+    },
+    "TemperatureUnit": {
+      "text2": ["Jednostka", "temperatury"],
+      "desc": "Jednostka temperatury (C: Celciusz | F: Fahrenheit)"
+    },
+    "AdvancedIdle": {
+      "text2": ["Szeczegółowy", "ekran bezczy."],
+      "desc": "Wyświetla szczegółowe informacje za pomocą mniejszej czcionki na ekranie bezczynności"
+    },
+    "DisplayRotation": {
+      "text2": ["Obrót", "ekranu"],
+      "desc": "Obrót ekranu (P: dla praworęcznych | L: dla leworęcznych | A: automatycznie)"
+    },
+    "BoostTemperature": {
+      "text2": ["Temp.", "boost"],
+      "desc": "Temperatura w trybie \"boost\" "
+    },
+    "AutoStart": {
+      "text2": ["Aut. uruch.", "tr. lutowania"],
+      "desc": "Automatyczne uruchamianie trybu lutowania po włączeniu zasilania. (B: wyłączone | T: lutowanie | Z: uśpienie | O: uśpienie w temp. pokojowej)"
+    },
+    "CooldownBlink": {
+      "text2": ["Mig. podczas", "wychładzania"],
+      "desc": "Temperatura miga podczas wychładzania, gdy grot jest wciąż gorący"
+    },
+    "TemperatureCalibration": {
+      "text2": ["Kalibracja", "temp. grotu"],
+      "desc": "Kalibracja temperatury grotu lutownicy"
+    },
+    "SettingsReset": {
+      "text2": ["Ustawienia", "fabryczne"],
+      "desc": "Resetuje wszystkie ustawienia"
+    },
+    "VoltageCalibration": {
+      "text2": ["Kalibracja", "napięcia"],
+      "desc": "Kalibracja napięcia wejściowego. Krótkie naciśnięcie, aby ustawić, długie naciśnięcie, aby wyjść."
+    },
+    "AdvancedSoldering": {
+      "text2": ["Sz. inf. w", "tr. lutowania"],
+      "desc": "Wyświetl szczegółowe informacje w trybie lutowania"
+    },
+    "ScrollingSpeed": {
+      "text2": ["Sz. przew.", "tekstu"],
+      "desc": "Szybkość przewijania tekstu"
+    },
+    "QCMaxVoltage": {
+      "text2": ["Moc", "w W"],
+      "desc": "Moc używanego zasilacza w (W)"
+    },
+    "PDNegTimeout": {
+      "text2": ["Limit czasu", "PD"],
+      "desc": "Limit czasu negocjacji PD w krokach co 100 ms dla zgodności z niektórymi ładowarkami QC (0: wyłączone)"
+    },
+    "PowerLimit": {
+      "text2": ["Ogr.", "mocy"],
+      "desc": "Maksymalna moc (W), jakiej może użyć lutownica"
+    },
+    "ReverseButtonTempChange": {
+      "text2": ["Zamień przyc.", "+ -"],
+      "desc": "Zamienia działanie przycisków zmiany temperatury grotu"
+    },
+    "TempChangeShortStep": {
+      "text2": ["Zm. temp.", "kr. przyc."],
+      "desc": "Wartość zmiany temperatury, po krótkim przyciśnięciu (°C)"
+    },
+    "TempChangeLongStep": {
+      "text2": ["Zm. temp.", "dł. przyc."],
+      "desc": "Wartość zmiany temperatury, po długim przyciśnięciu (°C)"
+    },
+    "PowerPulsePower": {
+      "text2": ["Moc", "impulsu"],
+      "desc": "W przypadku używania powerbanku, utrzymuj moc na poziomie (W) aby nie uśpić powerbanku"
+    },
+    "HallEffSensitivity": {
+      "text2": ["Czułość", "cz. Halla"],
+      "desc": "Czułość czujnika Halla, używanego do przechodznia w tryb uśpienia (O=Wył | N=Niska | Ś=Średnia | W=Wysoka)"
+    },
+    "LockingMode": {
+      "text2": ["Blokada", "przycisków"],
+      "desc": "W trybie lutowania, wciśnij oba przyciski aby je zablokować (O=Wyłączona | B=tylko Boost | P=pełna blokada)"
+    },
+    "MinVolCell": {
+      "text2": ["Minimalne", "napięcie"],
+      "desc": "Minimalne dozwolone napięcie na komórkę (3S: 3 - 3,7V | 4-6S: 2,4 - 3,7V)"
+    },
+    "AnimLoop": {
+      "text2": ["Zapętlona", "animacja"],
+      "desc": "Zapętla animację ikon w menu głównym"
+    },
+    "AnimSpeed": {
+      "text2": ["Prędkosć", "animacji"],
+      "desc": "Prędkość animacji ikon w menu (O: wył. | L: mała | M: średnia | H: duża)"
+    },
+    "PowerPulseWait": {
+      "text2": ["Czas między", "imp. mocy"],
+      "desc": "Czas między kolejnymi impulsami mocy zapobiegającymi usypianiu powerbanku (x2,5 s)"
+    },
+    "PowerPulseDuration": {
+      "text2": ["Długość", "impulsu mocy"],
+      "desc": "Długość impulsu mocy zapobiegającego usypianiu powerbanku (x250 ms)"
+    },
+    "LanguageSwitch": {
+      "text2": ["Język :", " PL      Polski"],
+      "desc": ""
+    },
+    "Brightness": {
+      "text2": ["Jasność", "wyświetlacza"],
+      "desc": "Regulacja kontrastu/jasności wyświetlacza OLED"
+    },
+    "ColourInversion": {
+      "text2": ["Odwrócenie", "kolorów"],
+      "desc": "Odwrócenie kolorów wyświetlacza OLED"
+    }
+  }
+}

Translations/translation_PT.json

@@ -0,0 +1,213 @@
+{
+  "languageCode": "PT",
+  "languageLocalName": "Português",
+  "fonts": ["ascii_basic", "latin_extended"],
+  "messages": {
+    "SettingsCalibrationDone": "Calibração terminada!",
+    "SettingsCalibrationWarning": "A ponta deve estar à temperatura ambiente antes de continuar!",
+    "SettingsResetWarning": "Definições de fábrica?",
+    "UVLOWarningString": "DC BAIXO",
+    "UndervoltageString": "Subtensão",
+    "InputVoltageString": "Tensão ",
+    "WarningTipTempString": "Temperatura ",
+    "BadTipString": "ER PONTA",
+    "SleepingSimpleString": "Zzzz",
+    "SleepingAdvancedString": "Repouso...",
+    "WarningSimpleString": "TEMP",
+    "WarningAdvancedString": "TEMP ELEVADA!",
+    "SleepingTipAdvancedString": "Ponta:",
+    "IdleTipString": "Ponta:",
+    "IdleSetString": " Aj:",
+    "TipDisconnectedString": "SEM PONTA",
+    "SolderingAdvancedPowerPrompt": "Power: ",
+    "OffString": "Off",
+    "YourGainMessage": "Your gain:"
+  },
+  "messagesWarn": {
+    "ResetOKMessage": "Reset OK",
+    "SettingsResetMessage": ["Settings were", "reset!"],
+    "NoAccelerometerMessage": ["No accelerometer", "detected!"],
+    "NoPowerDeliveryMessage": ["No USB-PD IC", "detected!"],
+    "LockingKeysString": "LOCKED",
+    "UnlockingKeysString": "UNLOCKED",
+    "WarningKeysLockedString": "!LOCKED!",
+    "WarningThermalRunaway": ["Thermal", "Runaway"]
+  },
+  "characters": {
+    "SettingRightChar": "D",
+    "SettingLeftChar": "C",
+    "SettingAutoChar": "A",
+    "SettingOffChar": "O",
+    "SettingSlowChar": "L",
+    "SettingMediumChar": "M",
+    "SettingFastChar": "R",
+    "SettingStartNoneChar": "D",
+    "SettingStartSolderingChar": "S",
+    "SettingStartSleepChar": "H",
+    "SettingStartSleepOffChar": "A",
+    "SettingSensitivityOff": "O",
+    "SettingSensitivityLow": "L",
+    "SettingSensitivityMedium": "M",
+    "SettingSensitivityHigh": "H",
+    "SettingLockDisableChar": "D",
+    "SettingLockBoostChar": "B",
+    "SettingLockFullChar": "F",
+    "SettingNAChar": "N/A"
+  },
+  "menuGroups": {
+    "PowerMenu": {
+      "text2": ["Power", "settings"],
+      "desc": "Power settings"
+    },
+    "SolderingMenu": {
+      "text2": ["Configurações", "Solda"],
+      "desc": "Configurações de soldagem"
+    },
+    "PowerSavingMenu": {
+      "text2": ["Modos", "Repouso"],
+      "desc": "Configurações de economia de energia"
+    },
+    "UIMenu": {
+      "text2": ["Interface", "Utilizador"],
+      "desc": "Configurações do interface do utilizador"
+    },
+    "AdvancedMenu": {
+      "text2": ["Menu", "Avançado"],
+      "desc": "Opções avançadas"
+    }
+  },
+  "menuOptions": {
+    "DCInCutoff": {
+      "text2": ["Fonte", "alimentação"],
+      "desc": "Fonte de alimentação. Define a tensão de corte. (DC=10V) (S=3.3V/célula)"
+    },
+    "SleepTemperature": {
+      "text2": ["Temperat.", "repouso"],
+      "desc": "Temperatura de repouso (C)"
+    },
+    "SleepTimeout": {
+      "text2": ["Tempo", "repouso"],
+      "desc": "Tempo para repouso (Minutos | Segundos)"
+    },
+    "ShutdownTimeout": {
+      "text2": ["Tempo", "desligam."],
+      "desc": "Tempo para desligamento (Minutos)"
+    },
+    "MotionSensitivity": {
+      "text2": ["Sensibilidade", "movimento"],
+      "desc": "Sensibilidade ao movimento (0=Desligado | 1=Menor | ... | 9=Maior)"
+    },
+    "TemperatureUnit": {
+      "text2": ["Unidade", "temperatura"],
+      "desc": "Unidade de temperatura (C=Celsius | F=Fahrenheit)"
+    },
+    "AdvancedIdle": {
+      "text2": ["Tela repouso", "avançada"],
+      "desc": "Exibe informações avançadas quando em espera"
+    },
+    "DisplayRotation": {
+      "text2": ["Orientação", "tela"],
+      "desc": "Orientação da tela (D=estro | C=anhoto | A=utomática)"
+    },
+    "BoostTemperature": {
+      "text2": ["Modo turbo", "temperat."],
+      "desc": "Ajuste de temperatura do modo \"turbo\""
+    },
+    "AutoStart": {
+      "text2": ["Partida", "automática"],
+      "desc": "Aquece a ponta automaticamente ao ligar (D=desligar | S=soldagem | H=hibernar | A=hibernar temp. ambiente)"
+    },
+    "CooldownBlink": {
+      "text2": ["Piscar ao", "arrefecer"],
+      "desc": "Faz o valor da temperatura piscar durante o arrefecimento"
+    },
+    "TemperatureCalibration": {
+      "text2": ["Calibrar", "temperatura"],
+      "desc": "Calibra a temperatura"
+    },
+    "SettingsReset": {
+      "text2": ["Reset de", "fábrica?"],
+      "desc": "Reverte todos ajustes"
+    },
+    "VoltageCalibration": {
+      "text2": ["Calibrar", "tensão"],
+      "desc": "Calibra a tensão de alimentação. Use os botões para ajustar o valor. Mantenha pressionado para sair"
+    },
+    "AdvancedSoldering": {
+      "text2": ["Tela trabalho", "avançada"],
+      "desc": "Exibe informações avançadas durante o uso"
+    },
+    "ScrollingSpeed": {
+      "text2": ["Velocidade", "texto ajuda"],
+      "desc": "Velocidade a que o texto é exibido"
+    },
+    "QCMaxVoltage": {
+      "text2": ["Potência", "Fonte"],
+      "desc": "Potência da fonte usada (Watt)"
+    },
+    "PDNegTimeout": {
+      "text2": ["PD", "timeout"],
+      "desc": "PD negotiation timeout in 100ms steps for compatibility with some QC chargers (0: disabled)"
+    },
+    "PowerLimit": {
+      "text2": ["Power", "Limit"],
+      "desc": "Maximum power the iron can use (Watts)"
+    },
+    "ReverseButtonTempChange": {
+      "text2": ["Key +-", "reverse?"],
+      "desc": "Reverse the tip temperature change buttons plus minus assignment."
+    },
+    "TempChangeShortStep": {
+      "text2": ["Temp change", "short?"],
+      "desc": "Temperature change steps on short button press!"
+    },
+    "TempChangeLongStep": {
+      "text2": ["Temp change", "long?"],
+      "desc": "Temperature change steps on long button press!"
+    },
+    "PowerPulsePower": {
+      "text2": ["Power", "Pulse W"],
+      "desc": "Keep awake pulse power intensity"
+    },
+    "HallEffSensitivity": {
+      "text2": ["Hall Eff", "Sensitivity"],
+      "desc": "Sensitivity of the Hall effect sensor in detecting sleep (O=Off | L=Low | M=Medium | H=High)"
+    },
+    "LockingMode": {
+      "text2": ["Allow buttons", "locking"],
+      "desc": "When soldering, long press on both buttons lock them (D=Disable | B=Boost only | F=Full locking)"
+    },
+    "MinVolCell": {
+      "text2": ["Minimum", "voltage"],
+      "desc": "Minimum allowed voltage per cell (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)"
+    },
+    "AnimLoop": {
+      "text2": ["Anim.", "loop"],
+      "desc": "Loop icon animations in root menu"
+    },
+    "AnimSpeed": {
+      "text2": ["Anim.", "speed"],
+      "desc": "Speed of icon animations in menu (O=off | L=low | M=medium | H=high)"
+    },
+    "PowerPulseWait": {
+      "text2": ["Power pulse", "wait time"],
+      "desc": "Time to wait before triggering every keep-awake pulse (x 2.5s)"
+    },
+    "PowerPulseDuration": {
+      "text2": ["Power pulse", "duration"],
+      "desc": "Keep-awake-pulse duration (x 250ms)"
+    },
+    "LanguageSwitch": {
+      "text2": ["Idioma :", " PT   Português"],
+      "desc": ""
+    },
+    "Brightness": {
+      "text2": ["Screen", "Brightness"],
+      "desc": "Adjust the contrast/brightness of the OLED screen"
+    },
+    "ColourInversion": {
+      "text2": ["Screen", "Invert"],
+      "desc": "Invert the colours of the OLED screen"
+    }
+  }
+}

Translations/translation_RO.json

@@ -0,0 +1,214 @@
+{
+  "languageCode": "RO",
+  "languageLocalName": "Română",
+  "fonts": ["ascii_basic", "latin_extended"],
+  "tempUnitFahrenheit": true,
+  "messages": {
+    "SettingsCalibrationDone": "Calibrare completa!",
+    "SettingsCalibrationWarning": "Vă rugăm să vă asigurati că vârful este la temperatura camerei, înainte de a continua!",
+    "SettingsResetWarning": "Sigur doriti să restaurati la setările implicite?",
+    "UVLOWarningString": "DC LOW",
+    "UndervoltageString": "Sub tensiune",
+    "InputVoltageString": "Intrare V: ",
+    "WarningTipTempString": "Temp. varf: ",
+    "BadTipString": "VARF DEFECT",
+    "SleepingSimpleString": "Zzzz",
+    "SleepingAdvancedString": "Adormit...",
+    "WarningSimpleString": "FIERBINTE!",
+    "WarningAdvancedString": "!!! VARF FIERBINTE !!!",
+    "SleepingTipAdvancedString": "Tip:",
+    "IdleTipString": "Tip:",
+    "IdleSetString": " Set:",
+    "TipDisconnectedString": "FĂRĂ VARF",
+    "SolderingAdvancedPowerPrompt": "Putere: ",
+    "OffString": "Nu",
+    "YourGainMessage": "Coeficient:"
+  },
+  "messagesWarn": {
+    "ResetOKMessage": "Reset OK",
+    "SettingsResetMessage": ["Setările au fost", "resetate!"],
+    "NoAccelerometerMessage": ["Nu accelerometru", "detectat!"],
+    "NoPowerDeliveryMessage": ["Fără USB-PD IC", "detectat!"],
+    "LockingKeysString": "BLOCAT",
+    "UnlockingKeysString": "DEBLOCAT",
+    "WarningKeysLockedString": "!BLOCAT!",
+    "WarningThermalRunaway": ["Incalzire", "Esuata"]
+  },
+  "characters": {
+    "SettingRightChar": "D",
+    "SettingLeftChar": "S",
+    "SettingAutoChar": "A",
+    "SettingOffChar": "O",
+    "SettingSlowChar": "Î",
+    "SettingMediumChar": "M",
+    "SettingFastChar": "R",
+    "SettingStartNoneChar": "O",
+    "SettingStartSolderingChar": "S",
+    "SettingStartSleepChar": "Z",
+    "SettingStartSleepOffChar": "R",
+    "SettingSensitivityOff": "O",
+    "SettingSensitivityLow": "L",
+    "SettingSensitivityMedium": "M",
+    "SettingSensitivityHigh": "H",
+    "SettingLockDisableChar": "D",
+    "SettingLockBoostChar": "B",
+    "SettingLockFullChar": "F",
+    "SettingNAChar": "N/A"
+  },
+  "menuGroups": {
+    "PowerMenu": {
+      "text2": ["Setări de", "alimentare"],
+      "desc": "Setări de alimentare"
+    },
+    "SolderingMenu": {
+      "text2": ["Setări de", "lipire"],
+      "desc": "Setări de lipire"
+    },
+    "PowerSavingMenu": {
+      "text2": ["Modul", "repaus"],
+      "desc": "Setări de economisire a energiei"
+    },
+    "UIMenu": {
+      "text2": ["Interfată", "utilizator"],
+      "desc": "Setări interfată utilizator"
+    },
+    "AdvancedMenu": {
+      "text2": ["Optiuni", "avansate"],
+      "desc": "Optiuni avansate"
+    }
+  },
+  "menuOptions": {
+    "DCInCutoff": {
+      "text2": ["Sursa de", "alimentare"],
+      "desc": "Sursa de alimentare. Setează tensiunea de întrerupere. (DC 10V) (S 3.3V per celulă, dezactivati limita de alimentare)"
+    },
+    "SleepTemperature": {
+      "text2": ["Temp", "repaus"],
+      "desc": "Temperatura vârfului în \"modul repaus\""
+    },
+    "SleepTimeout": {
+      "text2": ["Expirare", "repaus"],
+      "desc": "Interval înainte de lansarea \"modului de repaus\" în (S=secunde | M=minute)"
+    },
+    "ShutdownTimeout": {
+      "text2": ["Expirare", "oprire"],
+      "desc": "Interval înainte ca letconul să se oprească (M=minute)"
+    },
+    "MotionSensitivity": {
+      "text2": ["Sensibilitate", "la mişcare"],
+      "desc": "0=oprit | 1=putin sensibil | ... | 9=cel mai sensibil"
+    },
+    "TemperatureUnit": {
+      "text2": ["Unitate de", "temperatură"],
+      "desc": "C=Celsius | F=Fahrenheit"
+    },
+    "AdvancedIdle": {
+      "text2": ["Detalii,", "ecran inactiv"],
+      "desc": "Afisati informatii detaliate într-un font mai mic pe ecranul de repaus"
+    },
+    "DisplayRotation": {
+      "text2": ["Orientare", "ecran"],
+      "desc": "R=dreptaci | L=stângaci | A=auto"
+    },
+    "BoostTemperature": {
+      "text2": ["Boost", "temp"],
+      "desc": "Temperatura utilizată în \"modul boost\""
+    },
+    "AutoStart": {
+      "text2": ["Auto", "start"],
+      "desc": "Start letcon în modul de lipire la pornire (O=oprit | S=lipire | Z=repaus | R=repaus la temperatura camerei)"
+    },
+    "CooldownBlink": {
+      "text2": ["Clipeste", "la răcire"],
+      "desc": "Clipeste temperatura după oprirea încălzirii, în timp ce vârful este încă fierbinte"
+    },
+    "TemperatureCalibration": {
+      "text2": ["Calibrare", "temperatură?"],
+      "desc": "Începeti calibrarea compensării de temperatură a vârfului"
+    },
+    "SettingsReset": {
+      "text2": ["Setări", "din fabrică"],
+      "desc": "Reveniti la setările din fabrică"
+    },
+    "VoltageCalibration": {
+      "text2": ["Calibrare tens.", "de intrare?"],
+      "desc": "Porniti calibrarea VIN (apăsati lung pentru a iesi)"
+    },
+    "AdvancedSoldering": {
+      "text2": ["Detalii", "ecran lipire"],
+      "desc": "Afisati informatii detaliate într-un font mai mic pe ecranul de lipire"
+    },
+    "ScrollingSpeed": {
+      "text2": ["Viteză", "derulare"],
+      "desc": "Viteză derulare text cu informatii la (S=lent | F=rapid)"
+    },
+    "QCMaxVoltage": {
+      "text2": ["QC", "voltaj"],
+      "desc": "Tensiunea maximă QC dorită pentru care negociază letconul"
+    },
+    "PDNegTimeout": {
+      "text2": ["PD", "timeout"],
+      "desc": "Timp limita de negociere pentru tranzactia PD, in pasi de 100ms, pentru compatibilitate cu alimentatoarele QC"
+    },
+    "PowerLimit": {
+      "text2": ["Putere", "limită"],
+      "desc": "Puterea maximă pe care letconul o poate folosi (W=watt)"
+    },
+    "ReverseButtonTempChange": {
+      "text2": ["Inversare", "+ - butoane"],
+      "desc": "Inversarea butoanelor de reglare a temperaturii"
+    },
+    "TempChangeShortStep": {
+      "text2": ["Schimbare temp.", "apăsare scută"],
+      "desc": "Schimbarea temperaturii la apăsarea scurtă a butonului"
+    },
+    "TempChangeLongStep": {
+      "text2": ["Schimbare temp.", "apăsare lungă"],
+      "desc": "Schimbarea temperaturii la apăsarea lungă a butonului"
+    },
+    "PowerPulsePower": {
+      "text2": ["Putere", "puls"],
+      "desc": "Puterea pulsului de mentinere activa a blocului de alimentare (watt)"
+    },
+    "HallEffSensitivity": {
+      "text2": ["Sensibilitate", "senzor Hall"],
+      "desc": "Sensibilitate senzor cu efect Hall pentru a detecta repausul (O=oprit | L=scăzut | M=mediu | H=înalt)"
+    },
+    "LockingMode": {
+      "text2": ["Blocare", "butoane"],
+      "desc": "Când lipiti, apăsati lung ambele butoane, pentru a le bloca (D=dezactivare | B=numai \"modul boost\" | F=blocare completă)"
+    },
+    "MinVolCell": {
+      "text2": ["Voltaj", "minim"],
+      "desc": "Tensiunea minimă admisă pe celulă (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)"
+    },
+    "AnimLoop": {
+      "text2": ["Animatii", "buclă"],
+      "desc": "Animatii de pictograme în meniul principal"
+    },
+    "AnimSpeed": {
+      "text2": ["Animatii", "viteză"],
+      "desc": "Ritmul animatiilor pictogramei din meniu (O=oprit | S=încet | M=mediu | F=rapid)"
+    },
+    "PowerPulseWait": {
+      "text2": ["Întârziere", "puls putere"],
+      "desc": "Perioada pulsului de mentinere (x 2.5s)"
+    },
+    "PowerPulseDuration": {
+      "text2": ["Durată", "puls putere"],
+      "desc": "Durata pulsului de mentinere (x 250ms)"
+    },
+    "LanguageSwitch": {
+      "text2": ["Limbă:", " RO     Română"],
+      "desc": "Limba curenta"
+    },
+    "Brightness": {
+        "text2": ["Ecranului", "luminozitatea"],
+        "desc": "Ajusteaza luminozitatea ecranului"
+    },
+    "ColourInversion": {
+        "text2": ["Inverseaza", "culoarea"],
+        "desc": "Inverseaza culoarea ecranului"
+    }
+  }
+}

Translations/translation_RU.json

@@ -0,0 +1,213 @@
+{
+  "languageCode": "RU",
+  "languageLocalName": "Русский",
+  "fonts": ["ascii_basic", "latin_extended", "cyrillic"],
+  "messages": {
+    "SettingsCalibrationDone": "Калибровка завершена!",
+    "SettingsCalibrationWarning": "Прежде чем продолжить, пожалуйста, убедитесь, что жало имеет комнатную температуру!",
+    "SettingsResetWarning": "Вы уверены, что хотите сбросить настройки к значениям по умолчанию?",
+    "UVLOWarningString": "НАПРЯЖ--",
+    "UndervoltageString": "Низкое напряжение",
+    "InputVoltageString": "Питание В: ",
+    "WarningTipTempString": "Темп. жала: ",
+    "BadTipString": "ЖАЛО--",
+    "SleepingSimpleString": "Zzzz",
+    "SleepingAdvancedString": "Ожидание...",
+    "WarningSimpleString": "ГОРЯЧО!",
+    "WarningAdvancedString": "!!! ГОРЯЧЕЕ !!!\n!!! ЖАЛО !!!",
+    "SleepingTipAdvancedString": "Жало:",
+    "IdleTipString": "Жало:",
+    "IdleSetString": " ->",
+    "TipDisconnectedString": "ЖАЛО ОТСОЕДИНЕНО",
+    "SolderingAdvancedPowerPrompt": "Питание: ",
+    "OffString": "Выкл.",
+    "YourGainMessage": "Прирост:"
+  },
+  "messagesWarn": {
+    "ResetOKMessage": "Сброс OK",
+    "SettingsResetMessage": ["Настройки", "сброшены!"],
+    "NoAccelerometerMessage": ["Не определен", "акселерометр!"],
+    "NoPowerDeliveryMessage": ["No USB-PD IC", "detected!"],
+    "LockingKeysString": "LOCKED",
+    "UnlockingKeysString": "UNLOCKED",
+    "WarningKeysLockedString": "!LOCKED!",
+    "WarningThermalRunaway": ["Thermal", "Runaway"]
+  },
+  "characters": {
+    "SettingRightChar": "П",
+    "SettingLeftChar": "Л",
+    "SettingAutoChar": "А",
+    "SettingOffChar": "O",
+    "SettingSlowChar": "М",
+    "SettingMediumChar": "M",
+    "SettingFastChar": "Б",
+    "SettingStartNoneChar": "В",
+    "SettingStartSolderingChar": "П",
+    "SettingStartSleepChar": "О",
+    "SettingStartSleepOffChar": "К",
+    "SettingSensitivityOff": "О",
+    "SettingSensitivityLow": "Н",
+    "SettingSensitivityMedium": "С",
+    "SettingSensitivityHigh": "В",
+    "SettingLockDisableChar": "О",
+    "SettingLockBoostChar": "Т",
+    "SettingLockFullChar": "П",
+    "SettingNAChar": "Н/Д"
+  },
+  "menuGroups": {
+    "PowerMenu": {
+      "text2": ["Параметры", "питания"],
+      "desc": "Источник питания и минимальное напряжение на ячейку"
+    },
+    "SolderingMenu": {
+      "text2": ["Параметры", "пайки"],
+      "desc": "Параметры пайки"
+    },
+    "PowerSavingMenu": {
+      "text2": ["Режимы", "сна"],
+      "desc": "Настройки режима ожидания"
+    },
+    "UIMenu": {
+      "text2": ["Параметры", "интерфейса"],
+      "desc": "Настройки пользовательского интерфейса"
+    },
+    "AdvancedMenu": {
+      "text2": ["Дополнител.", "настройки"],
+      "desc": "Дополнительные настройки"
+    }
+  },
+  "menuOptions": {
+    "DCInCutoff": {
+      "text2": ["Источник", "питания"],
+      "desc": "Источник питания. Устанавливает напряжение отсечки. (DC 10В) (S 3,3В на ячейку, без лимита мощности)"
+    },
+    "SleepTemperature": {
+      "text2": ["Темп.", "ожидания"],
+      "desc": "Температура режима ожидания"
+    },
+    "SleepTimeout": {
+      "text2": ["Таймаут", "ожидания"],
+      "desc": "Время до перехода в режим ожидания (Минуты | Секунды)"
+    },
+    "ShutdownTimeout": {
+      "text2": ["Таймаут", "выключения"],
+      "desc": "Время до отключения паяльника (Минуты)"
+    },
+    "MotionSensitivity": {
+      "text2": ["Чувствительн.", "акселерометра"],
+      "desc": "Чувствительность акселерометра (0=Выкл. | 1=Мин. | ... | 9=Макс.)"
+    },
+    "TemperatureUnit": {
+      "text2": ["Единицы", "температуры"],
+      "desc": "Единицы измерения температуры (C=Цельcия | F=Фаренгейта)"
+    },
+    "AdvancedIdle": {
+      "text2": ["Подробный", "реж. ожидания"],
+      "desc": "Отображать детальную информацию уменьшенным шрифтом на экране ожидания"
+    },
+    "DisplayRotation": {
+      "text2": ["Ориентация", "экрана"],
+      "desc": "Ориентация экрана (П=Правая рука | Л=Левая рука | А=Авто)"
+    },
+    "BoostTemperature": {
+      "text2": ["t° турбо", "режима"],
+      "desc": "Температура жала в турбо-режиме"
+    },
+    "AutoStart": {
+      "text2": ["Авто", "старт"],
+      "desc": "Режим, в котором запускается паяльник при подаче питания (В=Выкл. | П=Пайка | О=Ожидание | К=Ожидание при комн. темп.)"
+    },
+    "CooldownBlink": {
+      "text2": ["Мигание t°", "при остывании"],
+      "desc": "Мигать температурой на экране охлаждения, пока жало еще горячее"
+    },
+    "TemperatureCalibration": {
+      "text2": ["Калибровка", "температуры"],
+      "desc": "Калибровка термодатчика жала"
+    },
+    "SettingsReset": {
+      "text2": ["Сброс", "Настроек"],
+      "desc": "Сброс настроек к значеням по умолчанию"
+    },
+    "VoltageCalibration": {
+      "text2": ["Калибровка", "напряжения"],
+      "desc": "Калибровка входного напряжения (длинное нажатие для выхода)"
+    },
+    "AdvancedSoldering": {
+      "text2": ["Подробный", "экран пайки"],
+      "desc": "Показывать детальную информацию на экране пайки"
+    },
+    "ScrollingSpeed": {
+      "text2": ["Скорость", "текста"],
+      "desc": "Скорость прокрутки текста (М=медленно | Б=быстро)"
+    },
+    "QCMaxVoltage": {
+      "text2": ["Мощность", "питания"],
+      "desc": "Мощность используемого источника питания"
+    },
+    "PDNegTimeout": {
+      "text2": ["PD", "timeout"],
+      "desc": "PD negotiation timeout in 100ms steps for compatibility with some QC chargers (0: disabled)"
+    },
+    "PowerLimit": {
+      "text2": ["Предел", "мощности"],
+      "desc": "Максимальная мощность, которую может использовать паяльник (Ватт)"
+    },
+    "ReverseButtonTempChange": {
+      "text2": ["Инвертировать", "кнопки"],
+      "desc": "Инвертировать кнопки изменения температуры"
+    },
+    "TempChangeShortStep": {
+      "text2": ["Шаг темп.", "кор. наж."],
+      "desc": "Шаг изменения температуры при коротком нажатии кнопок"
+    },
+    "TempChangeLongStep": {
+      "text2": ["Шаг темп.", "длин. наж."],
+      "desc": "Шаг изменения температуры при длинном нажатии кнопок"
+    },
+    "PowerPulsePower": {
+      "text2": ["Сила имп.", "питания Вт"],
+      "desc": "Сила импульса удерживающего от сна повербанк или другой источник питания"
+    },
+    "HallEffSensitivity": {
+      "text2": ["Эффект Холла", "чувствительность"],
+      "desc": "Уровень чувствительности датчика холла в режиме сна (О=Отключено | Н=Низкий | С=Средний | В=Высокий)"
+    },
+    "LockingMode": {
+      "text2": ["Разрешить", "блок. кнопок"],
+      "desc": "При работе длинное нажатие обеих кнопок блокирует их (О=Отключено | Т=Только турбо | П=Полная блокировка)"
+    },
+    "MinVolCell": {
+      "text2": ["Мин.", "напр."],
+      "desc": "Минимальное разрешенное напряжение на ячейку (3S: 3 - 3,7V | 4-S: 2,4 - 3,7V)"
+    },
+    "AnimLoop": {
+      "text2": ["Зацикленная", "анимация"],
+      "desc": "Зацикленная анимация иконок в главном меню"
+    },
+    "AnimSpeed": {
+      "text2": ["Скорость", "анимации"],
+      "desc": "Скорость анимации иконок в главном меню (Милисекунды) (О=Отключено | Н=Низкий | С=Средний | В=Высокий)"
+    },
+    "PowerPulseWait": {
+      "text2": ["Power pulse", "wait time"],
+      "desc": "Time to wait before triggering every keep-awake pulse (x 2,5с)"
+    },
+    "PowerPulseDuration": {
+      "text2": ["Power pulse", "duration"],
+      "desc": "Keep-awake-pulse duration (x 250мс)"
+    },
+    "LanguageSwitch": {
+      "text2": ["Язык:", " RU     Русский"],
+      "desc": ""
+    },
+    "Brightness": {
+      "text2": ["Screen", "Brightness"],
+      "desc": "Adjust the contrast/brightness of the OLED screen"
+    },
+    "ColourInversion": {
+      "text2": ["Screen", "Invert"],
+      "desc": "Invert the colours of the OLED screen"
+    }
+  }
+}

Translations/translation_SK.json

@@ -1,54 +1,76 @@
 {
 	"languageCode": "SK",
 	"languageLocalName": "Slovenčina",
-	"cyrillicGlyphs": false,
+	"fonts": [
+		"ascii_basic",
+		"latin_extended"
+	],
 	"messages": {
-		"SettingsCalibrationDone": "Kalibrácia hotová!",
 		"SettingsCalibrationWarning": "Najprv sa prosím uistite, že hrot má izbovú teplotu!",
-		"SettingsResetWarning": "Naozaj chcete obnovit továrenské nastavenia?",
+		"SettingsResetWarning": "Naozaj chcete obnoviť továrenské nastavenia?",
 		"UVLOWarningString": "Nízke U!",
 		"UndervoltageString": "Nízke napätie",
 		"InputVoltageString": "Vstupné U: ",
-		"WarningTipTempString": "Tep. hrotu: ",
-		"BadTipString": "ZLÝ HROT",
 		"SleepingSimpleString": "Chrr",
 		"SleepingAdvancedString": "Pokojový režim..",
-		"WarningSimpleString": "PÁLI",
-		"WarningAdvancedString": "HROT JE HORÚCI !",
 		"SleepingTipAdvancedString": "Hrot:",
 		"IdleTipString": "Hrot:",
 		"IdleSetString": "Cieľ:",
 		"TipDisconnectedString": "HROT ODPOJENÝ",
 		"SolderingAdvancedPowerPrompt": "Výkon: ",
-		"OffString": "Vyp",
+		"OffString": "Vyp"
+	},
+	"messagesWarn": {
 		"ResetOKMessage": "Reset OK",
-		"YourGainMessage": "Zisk:",
-		"SettingsResetMessage": "Tov. nas. obnov.",
-		"NoAccelerometerMessage": "Bez pohyb. senz.",
-		"NoPowerDeliveryMessage": "Chýba čip USB-PD",
-		"LockingKeysString": " ZABLOK.",
+		"SettingsResetMessage": [
+			"Nastavenia",
+			"resetované"
+		],
+		"NoAccelerometerMessage": [
+			"Bez pohybového",
+			"senzora!"
+		],
+		"NoPowerDeliveryMessage": [
+			"Chýba čip",
+			"USB-PD!"
+		],
+		"LockingKeysString": "ZABLOK.",
 		"UnlockingKeysString": "ODBLOK.",
-		"WarningKeysLockedString": "!ZABLOK!"
+		"WarningKeysLockedString": "!ZABLOK!",
+		"WarningThermalRunaway": [
+			"Únik",
+			"Tepla"
+		]
 	},
 	"characters": {
 		"SettingRightChar": "P",
 		"SettingLeftChar": "L",
 		"SettingAutoChar": "A",
-		"SettingFastChar": "R",
+		"SettingOffChar": "Z",
 		"SettingSlowChar": "P",
-		"SettingStartSolderingChar": "S",
-		"SettingStartSleepChar": "K",
-		"SettingStartSleepOffChar": "O",
-		"SettingStartNoneChar": "N",
+		"SettingMediumChar": "S",
+		"SettingFastChar": "R",
+		"SettingStartNoneChar": "V",
+		"SettingStartSolderingChar": "Z",
+		"SettingStartSleepChar": "S",
+		"SettingStartSleepOffChar": "I",
 		"SettingSensitivityOff": "Z",
 		"SettingSensitivityLow": "N",
 		"SettingSensitivityMedium": "S",
 		"SettingSensitivityHigh": "V",
 		"SettingLockDisableChar": "Z",
 		"SettingLockBoostChar": "B",
-		"SettingLockFullChar": "P"
+		"SettingLockFullChar": "P",
+		"SettingNAChar": "N/A"
 	},
 	"menuGroups": {
+		"PowerMenu": {
+			"text2": [
+				"Nastavenie",
+				"výkonu"
+			],
+			"desc": "Nastavenie výkonu"
+		},
 		"SolderingMenu": {
 			"text2": [
 				"Nastavenie",
@@ -84,7 +106,7 @@
 				"Zdroj",
 				"napätia"
 			],
-			"desc": "Zdroj napätia. Nastavenie napätia pre vypnutie (cutoff)  <DC=10V, nS=n*3.3V pre LiIon články>"
+			"desc": "Zdroj napätia. Nastavenie napätia pre vypnutie (cutoff)  (DC=10V | nS=n*3.3V pre LiIon články)"
 		},
 		"SleepTemperature": {
 			"text2": [
@@ -98,42 +120,42 @@
 				"Pokojový",
 				"režim po"
 			],
-			"desc": "Pokojový režim po <S=sekundách/M=minútach>"
+			"desc": "Pokojový režim po (S=sekundách | M=minútach)"
 		},
 		"ShutdownTimeout": {
 			"text2": [
 				"Vypnutie",
 				"po"
 			],
-			"desc": "Čas na vypnutie <minúty>"
+			"desc": "Čas na vypnutie (minúty)"
 		},
 		"MotionSensitivity": {
 			"text2": [
 				"Citlivosť",
 				"pohybu"
 			],
-			"desc": "Citlivosť detekcie pohybu <0=Vyp, 1=Min ... 9=Max>"
+			"desc": "Citlivosť detekcie pohybu (0=Vyp | 1=Min | ... | 9=Max)"
 		},
 		"TemperatureUnit": {
 			"text2": [
 				"Jednotka",
 				"teploty"
 			],
-			"desc": "Jednotky merania teploty <C=stupne Celzia, F=stupne Fahrenheita>"
+			"desc": "Jednotky merania teploty (C=stupne Celzia | F=stupne Fahrenheita)"
 		},
 		"AdvancedIdle": {
 			"text2": [
 				"Detaily v",
 				"pokoj. režime"
 			],
-			"desc": "Zobraziť detailné informácie v pokojovom režime <T=Zap, F=Vyp>"
+			"desc": "Zobraziť detailné informácie v pokojovom režime (T=Zap | F=Vyp)"
 		},
 		"DisplayRotation": {
 			"text2": [
 				"Orientácia",
 				"displeja"
 			],
-			"desc": "Orientácia displeja <A=Auto, L=Ľavák, P=Pravák>"
+			"desc": "Orientácia displeja (P=Pravák | L=Ľavák | A=Auto)"
 		},
 		"BoostTemperature": {
 			"text2": [
@@ -147,7 +169,7 @@
 				"Automatické",
 				"spustenie"
 			],
-			"desc": "Pri štarte spustiť režim spájkovania <S=Zap, N=Vyp, K=Spanok>"
+			"desc": "Pri štarte spustiť režim spájkovania (V=Vyp | Z=Spájkovanie | S=Spanok | I=Spanok izbová teplota)"
 		},
 		"CooldownBlink": {
 			"text2": [
@@ -186,45 +208,31 @@
 		},
 		"ScrollingSpeed": {
 			"text2": [
-				"Rýchlost",
+				"Rýchlosť",
 				"skrolovania"
 			],
 			"desc": "Rýchlosť pohybu tohto textu"
 		},
-		"TipModel": {
-			"text2": [
-				"Typ",
-				"hrotu"
-			],
-			"desc": "Zvolenie hrotu"
-		},
-		"SimpleCalibrationMode": {
-			"text2": [
-				"Zjednodušená",
-				"kalibrácia"
-			],
-			"desc": "Zjednodušená kalibrácia pomocou horúcej vody"
-		},
-		"AdvancedCalibrationMode": {
-			"text2": [
-				"Pokročilá",
-				"kalibrácia"
-			],
-			"desc": "Pokročilá kalibrácia meraním teploty hrotu"
-		},
 		"QCMaxVoltage": {
 			"text2": [
-				"Obmedzenie",
-				"výkonu"
+				"Obmedzenie QC",
+				"napätia"
 			],
-			"desc": "Obmedzenie výkonu podľa použitého zdroja"
+			"desc": "Maximálne QC napätie ktoré si má systém vyžiadať"
+		},
+		"PDNegTimeout": {
+			"text2": [
+				"Čas vypršania",
+				"Power Delivery"
+			],
+			"desc": "Čas vyjednávania Power Delivery v 100ms krokoch pre kompatibilitu s niektorými QC nabíjačkami (0: vypnuté)"
 		},
 		"PowerLimit": {
 			"text2": [
 				"Obmedzenie",
 				"výkonu"
 			],
-			"desc": "Obmedzenie výkonu podľa použitého zdroja <watt>"
+			"desc": "Obmedzenie výkonu podľa použitého zdroja (watt)"
 		},
 		"ReverseButtonTempChange": {
 			"text2": [
@@ -252,28 +260,77 @@
 				"Intenzita",
 				"impulzu"
 			],
-			"desc": "Impulz udržujúci napájací zdroj zapnutý (power banky) <watt>"
-		},
-		"TipGain": {
-			"text2": [
-				"Zisk",
-				"hrotu"
-			],
-			"desc": "Úprava zisku hrotu (meranie)"
+			"desc": "Impulz udržujúci napájací zdroj zapnutý (power banky) (watt)"
 		},
 		"HallEffSensitivity": {
 			"text2": [
 				"Citliv.",
 				"Hall"
 			],
-			"desc": "Citlivosť Halloveho senzora pre detekciu spánku <Z=Zakázať,N=Nízka,S=Stredná,V=Vysoká>"
+			"desc": "Citlivosť Hallovho senzora pre detekciu spánku (Z=Zakázať | N=Nízka | S=Stredná | V=Vysoká)"
 		},
 		"LockingMode": {
 			"text2": [
 				"Povoliť zámok",
 				"tlačidiel"
 			],
-			"desc": "Zamknutie tlačidiel - dlhé stlačenie oboch naraz počas spájkovania <Z=Zakázať, B=Okrem boost, P=Plné zamknutie>"
+			"desc": "Zamknutie tlačidiel - dlhé stlačenie oboch naraz počas spájkovania (Z=Zakázať | B=Okrem boost | P=Plné zamknutie)"
+		},
+		"MinVolCell": {
+			"text2": [
+				"Minimálne",
+				"napätie"
+			],
+			"desc": "Minimálne napätie povolené na jeden článok (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)"
+		},
+		"AnimLoop": {
+			"text2": [
+				"Opakovanie",
+				"animácií"
+			],
+			"desc": "Opakovanie animácií ikoniek v hlavnom menu"
+		},
+		"AnimSpeed": {
+			"text2": [
+				"Rýchlosť",
+				"animácií"
+			],
+			"desc": "Rýchlosť animácií ikoniek v menu (O=off | P=pomaly | S=stredne | R=rýchlo)"
+		},
+		"PowerPulseWait": {
+			"text2": [
+				"Interval",
+				"impulzu"
+			],
+			"desc": "Interval medzi impulzami udržujúcimi napájací zdroj zapnutý (x 2.5s)"
+		},
+		"PowerPulseDuration": {
+			"text2": [
+				"Dĺžka impulzu",
+				""
+			],
+			"desc": "Dĺžka impulzu udržujúci napájací zdroj zapnutý (x 250ms)"
+		},
+		"LanguageSwitch": {
+			"text2": [
+				"Jazyk:",
+				" SK  Slovenčina"
+			],
+			"desc": "Aktuálny jazyk"
+		},
+		"Brightness": {
+			"text2": [
+				"Jas",
+				"obrazovky"
+			],
+			"desc": "Mení jas/kontrast OLED displeja"
+		},
+		"ColourInversion": {
+			"text2": [
+				"Invertovať",
+				"obrazovku"
+			],
+			"desc": "Invertovať farby OLED displeja"
 		}
 	}
 }

Translations/translation_SL.json

@@ -0,0 +1,213 @@
+{
+  "languageCode": "SL",
+  "languageLocalName": "Slovenščina",
+  "fonts": ["ascii_basic", "latin_extended"],
+  "messages": {
+    "SettingsCalibrationDone": "Kalibracija opravljena!",
+    "SettingsCalibrationWarning": "Pred nadaljevanjem mora biti konica segreta na sobno temperaturo!",
+    "SettingsResetWarning": "Res želite ponastaviti na privzete nastavitve?",
+    "UVLOWarningString": "NIZKA U",
+    "UndervoltageString": "Nizka napetost",
+    "InputVoltageString": "Vhodna U: ",
+    "WarningTipTempString": "Temp. kon.: ",
+    "BadTipString": "KONICA?",
+    "SleepingSimpleString": "Zzzz",
+    "SleepingAdvancedString": "Spim...",
+    "WarningSimpleString": "VROČ",
+    "WarningAdvancedString": "!!VROČA KONICA!!",
+    "SleepingTipAdvancedString": "Konica",
+    "IdleTipString": "Kon:",
+    "IdleSetString": " temp:",
+    "TipDisconnectedString": "NI KONICE",
+    "SolderingAdvancedPowerPrompt": "Moč: ",
+    "OffString": "Off",
+    "YourGainMessage": "Ojačenje"
+  },
+  "messagesWarn": {
+    "ResetOKMessage": "Reset OK",
+    "SettingsResetMessage": ["Nastavitve OK!", ""],
+    "NoAccelerometerMessage": ["Ni pospeševalnik", ""],
+    "NoPowerDeliveryMessage": ["Ni USB-PD čipa!", ""],
+    "LockingKeysString": "ZAKLENJ.",
+    "UnlockingKeysString": "ODKLENJ.",
+    "WarningKeysLockedString": "ZAKLENJ.",
+    "WarningThermalRunaway": ["Thermal", "Runaway"]
+  },
+  "characters": {
+    "SettingRightChar": "D",
+    "SettingLeftChar": "L",
+    "SettingAutoChar": "S",
+    "SettingOffChar": "U",
+    "SettingSlowChar": "P",
+    "SettingMediumChar": "M",
+    "SettingFastChar": "H",
+    "SettingStartNoneChar": "U",
+    "SettingStartSolderingChar": "S",
+    "SettingStartSleepChar": "Z",
+    "SettingStartSleepOffChar": "V",
+    "SettingSensitivityOff": "U",
+    "SettingSensitivityLow": "N",
+    "SettingSensitivityMedium": "S",
+    "SettingSensitivityHigh": "V",
+    "SettingLockDisableChar": "O",
+    "SettingLockBoostChar": "L",
+    "SettingLockFullChar": "P",
+    "SettingNAChar": "N/A"
+  },
+  "menuGroups": {
+    "PowerMenu": {
+      "text2": ["Power", "settings"],
+      "desc": "Power settings"
+    },
+    "SolderingMenu": {
+      "text2": ["Nastavitve", "spajkanja"],
+      "desc": "Nastavitve spajkanja"
+    },
+    "PowerSavingMenu": {
+      "text2": ["Način", "spanja"],
+      "desc": "Nastavitve varčevanja z energijo"
+    },
+    "UIMenu": {
+      "text2": ["Uporabniški", "vmesnik"],
+      "desc": "Nastavitve uporabniškega vmesnika"
+    },
+    "AdvancedMenu": {
+      "text2": ["Napredne", "možnosti"],
+      "desc": "Napredne možnosti"
+    }
+  },
+  "menuOptions": {
+    "DCInCutoff": {
+      "text2": ["Vir", "napajanja"],
+      "desc": "Vir napajanja. Nastavi napetost izklopa. (DC 10V) (S 3.3V na celico)"
+    },
+    "SleepTemperature": {
+      "text2": ["Temp. med", "spanjem"],
+      "desc": "Temperatura med spanjem"
+    },
+    "SleepTimeout": {
+      "text2": ["Čas do", "spanja"],
+      "desc": "Čas pred spanjem (S=sekunde | M=minute)"
+    },
+    "ShutdownTimeout": {
+      "text2": ["Čas do", "izklopa"],
+      "desc": "Čas do izklopa (M=minute)"
+    },
+    "MotionSensitivity": {
+      "text2": ["Občutljivost", "premikanja"],
+      "desc": "0=izklopljeno | 1=najmanjša | ... | 9=največja"
+    },
+    "TemperatureUnit": {
+      "text2": ["Enota za", "temperaturo"],
+      "desc": "Enota za temperaturo (C=celzij | F=fahrenheit)"
+    },
+    "AdvancedIdle": {
+      "text2": ["Več info. na", "mir. zaslonu"],
+      "desc": "Prikaži več informacij z manjšo pisavo na mirovalnem zaslonu."
+    },
+    "DisplayRotation": {
+      "text2": ["Orientacija", "zaslona"],
+      "desc": "D=desničar | L=levičar | S=samodejno"
+    },
+    "BoostTemperature": {
+      "text2": ["Pospešena", "temp."],
+      "desc": "Temperatura v pospešenem načinu"
+    },
+    "AutoStart": {
+      "text2": ["Samodejni", "zagon"],
+      "desc": "Samodejno gretje konice ob vklopu (U=ugasnjeno | S=spajkanje | Z=spanje | V=spanje na sobni temperaturi)"
+    },
+    "CooldownBlink": {
+      "text2": ["Utripanje med", "hlajenjem"],
+      "desc": "Ko je konica še vroča, utripaj prikaz temperature med hlajenjem."
+    },
+    "TemperatureCalibration": {
+      "text2": ["Kalibriram", "temperaturo?"],
+      "desc": "Kalibracija temperature na konici."
+    },
+    "SettingsReset": {
+      "text2": ["Tovarniške", "nastavitve?"],
+      "desc": "Ponastavitev vseh nastavitev"
+    },
+    "VoltageCalibration": {
+      "text2": ["Kalibriram", "vhodno napetost?"],
+      "desc": "Kalibracija VIN (nastavitve z gumbi, dolg pritisk za izhod)"
+    },
+    "AdvancedSoldering": {
+      "text2": ["Več info na", "zaslonu spaj."],
+      "desc": "Prikaže več informacij z manjšo pisavo na zaslonu med spajkanjem."
+    },
+    "ScrollingSpeed": {
+      "text2": ["Hitrost", "besedila"],
+      "desc": "Hitrost, s katero se prikazuje besedilo (P=počasi | H=hitro)"
+    },
+    "QCMaxVoltage": {
+      "text2": ["QC", "napetost"],
+      "desc": "Moč napajalnega vira v vatih [W]"
+    },
+    "PDNegTimeout": {
+      "text2": ["PD", "timeout"],
+      "desc": "PD negotiation timeout in 100ms steps for compatibility with some QC chargers (0: disabled)"
+    },
+    "PowerLimit": {
+      "text2": ["Meja", "moči"],
+      "desc": "Največja dovoljena moč v vatih [W]"
+    },
+    "ReverseButtonTempChange": {
+      "text2": ["Obrni", "tipki + -?"],
+      "desc": "Zamenjaj funkciji gumbov."
+    },
+    "TempChangeShortStep": {
+      "text2": ["Kratka sprememba", "temperature?"],
+      "desc": "Temperatura se spremeni ob kratkem pritisku na gumb."
+    },
+    "TempChangeLongStep": {
+      "text2": ["Dolga sprememba", "temperature?"],
+      "desc": "Temperatura se spremeni ob dolgem pritisku na gumb."
+    },
+    "PowerPulsePower": {
+      "text2": ["Pulz", "moči"],
+      "desc": "Velikost moči za vzdrževanje budnosti."
+    },
+    "HallEffSensitivity": {
+      "text2": ["Občut.", "Hall son"],
+      "desc": "Občutljivost Hallove sonde za zaznavanje spanja (U=ugasnjen | N=nizka | S=srednja | V=visoka)"
+    },
+    "LockingMode": {
+      "text2": ["Omogoči", "zaklep gumbov"],
+      "desc": "Za zaklep med spajkanjem drži oba gumba (O=onemogoči | L=le pospešeno | P=polno)"
+    },
+    "MinVolCell": {
+      "text2": ["Minimum", "voltage"],
+      "desc": "Minimum allowed voltage per cell (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)"
+    },
+    "AnimLoop": {
+      "text2": ["Anim.", "loop"],
+      "desc": "Loop icon animations in root menu"
+    },
+    "AnimSpeed": {
+      "text2": ["Anim.", "speed"],
+      "desc": "Speed of icon animations in menu (O=off | L=low | M=medium | H=high)"
+    },
+    "PowerPulseWait": {
+      "text2": ["Power pulse", "wait time"],
+      "desc": "Time to wait before triggering every keep-awake pulse (x 2.5s)"
+    },
+    "PowerPulseDuration": {
+      "text2": ["Power pulse", "duration"],
+      "desc": "Keep-awake-pulse duration (x 250ms)"
+    },
+    "LanguageSwitch": {
+      "text2": ["Jezik:", " SL Slovenščina"],
+      "desc": ""
+    },
+    "Brightness": {
+      "text2": ["Screen", "Brightness"],
+      "desc": "Adjust the contrast/brightness of the OLED screen"
+    },
+    "ColourInversion": {
+      "text2": ["Screen", "Invert"],
+      "desc": "Invert the colours of the OLED screen"
+    }
+  }
+}

Translations/translation_SR_CYRL.json

@@ -0,0 +1,213 @@
+{
+  "languageCode": "SR_CYRL",
+  "languageLocalName": "Српски",
+  "fonts": ["ascii_basic", "cyrillic"],
+  "messages": {
+    "SettingsCalibrationDone": "Калибрација готова",
+    "SettingsCalibrationWarning": "Проверите да ли је врх охлађен на собну температуру пре него што наставите",
+    "SettingsResetWarning": "Да ли заиста желите да вратите поставке на фабричке вредности?",
+    "UVLOWarningString": "НИЗ.НАП.",
+    "UndervoltageString": "ПРЕНИЗАК НАПОН",
+    "InputVoltageString": "Ул. напон: ",
+    "WarningTipTempString": "Темп. врха: ",
+    "BadTipString": "ЛОШ ВРХ",
+    "SleepingSimpleString": "Сан",
+    "SleepingAdvancedString": "Спавање...",
+    "WarningSimpleString": "ВРУЋ",
+    "WarningAdvancedString": "! ОПРЕЗ, ВРУЋЕ !",
+    "SleepingTipAdvancedString": "Врх:",
+    "IdleTipString": "Врх:",
+    "IdleSetString": " / ",
+    "TipDisconnectedString": "ВРХ НИЈЕ СПОЈЕН",
+    "SolderingAdvancedPowerPrompt": "Снага: ",
+    "OffString": "Иск",
+    "YourGainMessage": "Your gain:"
+  },
+  "messagesWarn": {
+    "ResetOKMessage": "Reset OK",
+    "SettingsResetMessage": ["Settings were", "reset!"],
+    "NoAccelerometerMessage": ["No accelerometer", "detected!"],
+    "NoPowerDeliveryMessage": ["No USB-PD IC", "detected!"],
+    "LockingKeysString": "LOCKED",
+    "UnlockingKeysString": "UNLOCKED",
+    "WarningKeysLockedString": "!LOCKED!",
+    "WarningThermalRunaway": ["Thermal", "Runaway"]
+  },
+  "characters": {
+    "SettingRightChar": "Д",
+    "SettingLeftChar": "Л",
+    "SettingAutoChar": "А",
+    "SettingOffChar": "O",
+    "SettingSlowChar": "С",
+    "SettingMediumChar": "M",
+    "SettingFastChar": "Б",
+    "SettingStartNoneChar": "И",
+    "SettingStartSolderingChar": "Л",
+    "SettingStartSleepChar": "С",
+    "SettingStartSleepOffChar": "X",
+    "SettingSensitivityOff": "O",
+    "SettingSensitivityLow": "L",
+    "SettingSensitivityMedium": "M",
+    "SettingSensitivityHigh": "H",
+    "SettingLockDisableChar": "D",
+    "SettingLockBoostChar": "B",
+    "SettingLockFullChar": "F",
+    "SettingNAChar": "N/A"
+  },
+  "menuGroups": {
+    "PowerMenu": {
+      "text2": ["Power", "settings"],
+      "desc": "Power settings"
+    },
+    "SolderingMenu": {
+      "text2": ["Поставке", "лемљења"],
+      "desc": "Поставке режима лемљења."
+    },
+    "PowerSavingMenu": {
+      "text2": ["Уштеда", "енергије"],
+      "desc": "Поставке режима мировања."
+    },
+    "UIMenu": {
+      "text2": ["Корисничко", "сучеље"],
+      "desc": "Поставке корисничког сучеља."
+    },
+    "AdvancedMenu": {
+      "text2": ["Напредне", "поставке"],
+      "desc": "Напредне поставке."
+    }
+  },
+  "menuOptions": {
+    "DCInCutoff": {
+      "text2": ["Врста", "напајања"],
+      "desc": "Тип напајања; одређује најнижи радни напон. (DC=адаптер [10V] | S=батерија [3,3V по ћелији])"
+    },
+    "SleepTemperature": {
+      "text2": ["Темп.", "спавања"],
+      "desc": "Температура на коју се спушта лемилица након одређеног времена мировања. (C | F)"
+    },
+    "SleepTimeout": {
+      "text2": ["Време до", "спавања"],
+      "desc": "Време мировања након кога лемилица спушта температуру. (M=минути | S=секунде)"
+    },
+    "ShutdownTimeout": {
+      "text2": ["Време до", "гашења"],
+      "desc": "Време мировања након кога се лемилица гаси. (M=минути)"
+    },
+    "MotionSensitivity": {
+      "text2": ["Осетљивост", "на покрет"],
+      "desc": "Осетљивост сензора покрета. (0=искључено | 1=најмање осетљиво | ... | 9=најосетљивије)"
+    },
+    "TemperatureUnit": {
+      "text2": ["Јединица", "температуре"],
+      "desc": "Јединице у којима се приказује температура. (C=целзијус | F=фаренхајт)"
+    },
+    "AdvancedIdle": {
+      "text2": ["Детаљи током", "мировања"],
+      "desc": "Приказивање детаљних информација на екрану током мировања."
+    },
+    "DisplayRotation": {
+      "text2": ["Оријентација", "екрана"],
+      "desc": "Како је окренут екран. (Д=за десноруке | Л=за леворуке | А=аутоматски)"
+    },
+    "BoostTemperature": {
+      "text2": ["Темп.", "појачања"],
+      "desc": "Температура врха лемилице у току појачања."
+    },
+    "AutoStart": {
+      "text2": ["Врући", "старт"],
+      "desc": "Лемилица одмах по покретању прелази у режим лемљења и греје се. (И=искључити | Л=лемљење | С=спавати | X=спавати собна температура)"
+    },
+    "CooldownBlink": {
+      "text2": ["Упозорење", "при хлађењу"],
+      "desc": "Приказ температуре трепће приликом хлађења докле год је врх и даље врућ."
+    },
+    "TemperatureCalibration": {
+      "text2": ["Калибрација", "температуре"],
+      "desc": "Калибрисање одступања температуре врха у односу на дршку."
+    },
+    "SettingsReset": {
+      "text2": ["Фабричке", "поставке"],
+      "desc": "Враћање свих поставки на фабричке вредности."
+    },
+    "VoltageCalibration": {
+      "text2": ["Калибрација", "улазног напона"],
+      "desc": "Калибрисање улазног напона. Подешава се на тастере; дуги притисак за крај."
+    },
+    "AdvancedSoldering": {
+      "text2": ["Детаљи током", "лемљења"],
+      "desc": "Приказивање детаљних информација на екрану током лемљења."
+    },
+    "ScrollingSpeed": {
+      "text2": ["Брзина", "порука"],
+      "desc": "Брзина кретања описних порука попут ове. (С=споро | Б=брзо)"
+    },
+    "QCMaxVoltage": {
+      "text2": ["Улазна", "снага"],
+      "desc": "Снага напајања у ватима."
+    },
+    "PDNegTimeout": {
+      "text2": ["PD", "timeout"],
+      "desc": "PD negotiation timeout in 100ms steps for compatibility with some QC chargers (0: disabled)"
+    },
+    "PowerLimit": {
+      "text2": ["Power", "Limit"],
+      "desc": "Maximum power the iron can use (Watts)"
+    },
+    "ReverseButtonTempChange": {
+      "text2": ["Key +-", "reverse?"],
+      "desc": "Reverse the tip temperature change buttons plus minus assignment."
+    },
+    "TempChangeShortStep": {
+      "text2": ["Temp change", "short?"],
+      "desc": "Temperature change steps on short button press!"
+    },
+    "TempChangeLongStep": {
+      "text2": ["Temp change", "long?"],
+      "desc": "Temperature change steps on long button press!"
+    },
+    "PowerPulsePower": {
+      "text2": ["Power", "Pulse W"],
+      "desc": "Keep awake pulse power intensity"
+    },
+    "HallEffSensitivity": {
+      "text2": ["Hall Eff", "Sensitivity"],
+      "desc": "Sensitivity of the Hall effect sensor in detecting sleep (O=Off | L=Low | M=Medium | H=High)"
+    },
+    "LockingMode": {
+      "text2": ["Allow buttons", "locking"],
+      "desc": "When soldering, long press on both buttons lock them (D=Disable | B=Boost only | F=Full locking)"
+    },
+    "MinVolCell": {
+      "text2": ["Minimum", "voltage"],
+      "desc": "Minimum allowed voltage per cell (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)"
+    },
+    "AnimLoop": {
+      "text2": ["Anim.", "loop"],
+      "desc": "Loop icon animations in root menu"
+    },
+    "AnimSpeed": {
+      "text2": ["Anim.", "speed"],
+      "desc": "Speed of icon animations in menu (O=off | L=low | M=medium | H=high)"
+    },
+    "PowerPulseWait": {
+      "text2": ["Power pulse", "wait time"],
+      "desc": "Time to wait before triggering every keep-awake pulse (x 2.5с)"
+    },
+    "PowerPulseDuration": {
+      "text2": ["Power pulse", "duration"],
+      "desc": "Keep-awake-pulse duration (x 250мс)"
+    },
+    "LanguageSwitch": {
+      "text2": ["Jезик:", " SR      Српски"],
+      "desc": ""
+    },
+    "Brightness": {
+      "text2": ["Screen", "Brightness"],
+      "desc": "Adjust the contrast/brightness of the OLED screen"
+    },
+    "ColourInversion": {
+      "text2": ["Screen", "Invert"],
+      "desc": "Invert the colours of the OLED screen"
+    }
+  }
+}

Translations/translation_SR_LATN.json

@@ -0,0 +1,213 @@
+{
+  "languageCode": "SR_LATN",
+  "languageLocalName": "Srpski",
+  "fonts": ["ascii_basic", "latin_extended"],
+  "messages": {
+    "SettingsCalibrationDone": "Kalibracija gotova",
+    "SettingsCalibrationWarning": "Proverite da li je vrh ohlađen na sobnu temperaturu pre nego što nastavite",
+    "SettingsResetWarning": "Da li zaista želite da vratite postavke na fabričke vrednosti?",
+    "UVLOWarningString": "NIZ.NAP.",
+    "UndervoltageString": "PRENIZAK NAPON",
+    "InputVoltageString": "Ul. napon: ",
+    "WarningTipTempString": "Temp. vrha: ",
+    "BadTipString": "LOŠ VRH",
+    "SleepingSimpleString": "Zzz",
+    "SleepingAdvancedString": "Spavanje...",
+    "WarningSimpleString": "VRUĆ",
+    "WarningAdvancedString": "! OPREZ, VRUĆE !",
+    "SleepingTipAdvancedString": "Vrh:",
+    "IdleTipString": "Vrh:",
+    "IdleSetString": " / ",
+    "TipDisconnectedString": "VRH NIJE SPOJEN",
+    "SolderingAdvancedPowerPrompt": "Snaga: ",
+    "OffString": "Isk",
+    "YourGainMessage": "Your gain:"
+  },
+  "messagesWarn": {
+    "ResetOKMessage": "Reset OK",
+    "SettingsResetMessage": ["Settings were", "reset!"],
+    "NoAccelerometerMessage": ["No accelerometer", "detected!"],
+    "NoPowerDeliveryMessage": ["No USB-PD IC", "detected!"],
+    "LockingKeysString": "LOCKED",
+    "UnlockingKeysString": "UNLOCKED",
+    "WarningKeysLockedString": "!LOCKED!",
+    "WarningThermalRunaway": ["Thermal", "Runaway"]
+  },
+  "characters": {
+    "SettingRightChar": "D",
+    "SettingLeftChar": "L",
+    "SettingAutoChar": "A",
+    "SettingOffChar": "O",
+    "SettingSlowChar": "S",
+    "SettingMediumChar": "M",
+    "SettingFastChar": "B",
+    "SettingStartNoneChar": "I",
+    "SettingStartSolderingChar": "L",
+    "SettingStartSleepChar": "S",
+    "SettingStartSleepOffChar": "X",
+    "SettingSensitivityOff": "O",
+    "SettingSensitivityLow": "L",
+    "SettingSensitivityMedium": "M",
+    "SettingSensitivityHigh": "H",
+    "SettingLockDisableChar": "D",
+    "SettingLockBoostChar": "B",
+    "SettingLockFullChar": "F",
+    "SettingNAChar": "N/A"
+  },
+  "menuGroups": {
+    "PowerMenu": {
+      "text2": ["Power", "settings"],
+      "desc": "Power settings"
+    },
+    "SolderingMenu": {
+      "text2": ["Postavke", "lemljenja"],
+      "desc": "Postavke režima lemljenja."
+    },
+    "PowerSavingMenu": {
+      "text2": ["Ušteda", "energije"],
+      "desc": "Postavke režima mirovanja."
+    },
+    "UIMenu": {
+      "text2": ["Korisničko", "sučelje"],
+      "desc": "Postavke korisničkog sučelja."
+    },
+    "AdvancedMenu": {
+      "text2": ["Napredne", "postavke"],
+      "desc": "Napredne postavke."
+    }
+  },
+  "menuOptions": {
+    "DCInCutoff": {
+      "text2": ["Vrsta", "napajanja"],
+      "desc": "Tip napajanja; određuje najniži radni napon. (DC=adapter [10V], S=baterija [3,3V po ćeliji])"
+    },
+    "SleepTemperature": {
+      "text2": ["Temp.", "spavanja"],
+      "desc": "Temperatura na koju se spušta lemilica nakon određenog vremena mirovanja. (C | F)"
+    },
+    "SleepTimeout": {
+      "text2": ["Vreme do", "spavanja"],
+      "desc": "Vreme mirovanja nakon koga lemilica spušta temperaturu. (M=minuti | S=sekunde)"
+    },
+    "ShutdownTimeout": {
+      "text2": ["Vreme do", "gašenja"],
+      "desc": "Vreme mirovanja nakon koga se lemilica gasi. (M=minuti)"
+    },
+    "MotionSensitivity": {
+      "text2": ["Osetljivost", "na pokret"],
+      "desc": "Osetljivost senzora pokreta. (0=isključeno | 1=najmanje osetljivo | ... | 9=najosetljivije)"
+    },
+    "TemperatureUnit": {
+      "text2": ["Jedinica", "temperature"],
+      "desc": "Jedinice u kojima se prikazuje temperatura. (C=celzijus | F=farenhajt)"
+    },
+    "AdvancedIdle": {
+      "text2": ["Detalji tokom", "mirovanja"],
+      "desc": "Prikazivanje detaljnih informacija na ekranu tokom mirovanja."
+    },
+    "DisplayRotation": {
+      "text2": ["Orijentacija", "ekrana"],
+      "desc": "Kako je okrenut ekran. (D=za desnoruke | L=za levoruke | A=automatski)"
+    },
+    "BoostTemperature": {
+      "text2": ["Temp.", "pojačanja"],
+      "desc": "Temperatura vrha lemilice u toku pojačanja."
+    },
+    "AutoStart": {
+      "text2": ["Vrući", "start"],
+      "desc": "Lemilica odmah po pokretanju prelazi u režim lemljenja i greje se. (I=isključiti | L=lemljenje | S=spavati | X=spavati sobna temperatura)"
+    },
+    "CooldownBlink": {
+      "text2": ["Upozorenje", "pri hlađenju"],
+      "desc": "Prikaz temperature trepće prilikom hlađenja dokle god je vrh i dalje vruć."
+    },
+    "TemperatureCalibration": {
+      "text2": ["Kalibracija", "temperature"],
+      "desc": "Kalibrisanje odstupanja temperature vrha u odnosu na dršku."
+    },
+    "SettingsReset": {
+      "text2": ["Fabričke", "postavke"],
+      "desc": "Vraćanje svih postavki na fabričke vrednosti."
+    },
+    "VoltageCalibration": {
+      "text2": ["Kalibracija", "ulaznog napona"],
+      "desc": "Kalibrisanje ulaznog napona. Podešava se na tastere; dugi pritisak za kraj."
+    },
+    "AdvancedSoldering": {
+      "text2": ["Detalji tokom", "lemljenja"],
+      "desc": "Prikazivanje detaljnih informacija na ekranu tokom lemljenja."
+    },
+    "ScrollingSpeed": {
+      "text2": ["Brzina", "poruka"],
+      "desc": "Brzina kretanja opisnih poruka poput ove. (S=sporo | B=brzo)"
+    },
+    "QCMaxVoltage": {
+      "text2": ["Ulazna", "snaga"],
+      "desc": "Snaga napajanja u vatima."
+    },
+    "PDNegTimeout": {
+      "text2": ["PD", "timeout"],
+      "desc": "PD negotiation timeout in 100ms steps for compatibility with some QC chargers (0: disabled)"
+    },
+    "PowerLimit": {
+      "text2": ["Power", "Limit"],
+      "desc": "Maximum power the iron can use (Watts)"
+    },
+    "ReverseButtonTempChange": {
+      "text2": ["Key +-", "reverse?"],
+      "desc": "Reverse the tip temperature change buttons plus minus assignment."
+    },
+    "TempChangeShortStep": {
+      "text2": ["Temp change", "short?"],
+      "desc": "Temperature change steps on short button press!"
+    },
+    "TempChangeLongStep": {
+      "text2": ["Temp change", "long?"],
+      "desc": "Temperature change steps on long button press!"
+    },
+    "PowerPulsePower": {
+      "text2": ["Power", "Pulse W"],
+      "desc": "Keep awake pulse power intensity"
+    },
+    "HallEffSensitivity": {
+      "text2": ["Hall Eff", "Sensitivity"],
+      "desc": "Sensitivity of the Hall effect sensor in detecting sleep (O=Off | L=Low | M=Medium | H=High)"
+    },
+    "LockingMode": {
+      "text2": ["Allow buttons", "locking"],
+      "desc": "When soldering, long press on both buttons lock them (D=Disable | B=Boost only | F=Full locking)"
+    },
+    "MinVolCell": {
+      "text2": ["Minimum", "voltage"],
+      "desc": "Minimum allowed voltage per cell (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)"
+    },
+    "AnimLoop": {
+      "text2": ["Anim.", "loop"],
+      "desc": "Loop icon animations in root menu"
+    },
+    "AnimSpeed": {
+      "text2": ["Anim.", "speed"],
+      "desc": "Speed of icon animations in menu (O=off | L=low | M=medium | H=high)"
+    },
+    "PowerPulseWait": {
+      "text2": ["Power pulse", "wait time"],
+      "desc": "Time to wait before triggering every keep-awake pulse (x 2.5s)"
+    },
+    "PowerPulseDuration": {
+      "text2": ["Power pulse", "duration"],
+      "desc": "Keep-awake-pulse duration (x 250ms)"
+    },
+    "LanguageSwitch": {
+      "text2": ["Jezik:", " SR      Srpski"],
+      "desc": ""
+    },
+    "Brightness": {
+      "text2": ["Screen", "Brightness"],
+      "desc": "Adjust the contrast/brightness of the OLED screen"
+    },
+    "ColourInversion": {
+      "text2": ["Screen", "Invert"],
+      "desc": "Invert the colours of the OLED screen"
+    }
+  }
+}

Translations/translation_SV.json

@@ -0,0 +1,207 @@
+{
+  "languageCode": "SV",
+  "languageLocalName": "Svenska",
+  "fonts": ["ascii_basic", "latin_extended"],
+  "messages": {
+    "SettingsCalibrationWarning": "Se till att spetsen är rumstemererad innan du fortsätter!",
+    "SettingsResetWarning": "Är du säker på att du vill återställa inställningarna?",
+    "UVLOWarningString": "DC LÅG",
+    "UndervoltageString": "Underspänning",
+    "InputVoltageString": "Inspän. V: ",
+    "SleepingSimpleString": "Zzzz",
+    "SleepingAdvancedString": "Viloläge...",
+    "SleepingTipAdvancedString": "Spets:",
+    "IdleTipString": "Spts:",
+    "IdleSetString": " Ang:",
+    "TipDisconnectedString": "SPETS URTAGEN",
+    "SolderingAdvancedPowerPrompt": "Ström: ",
+    "OffString": "Av"
+  },
+  "messagesWarn": {
+    "ResetOKMessage": "Reset OK",
+    "SettingsResetMessage": ["Inställningar", "återställda"],
+    "NoAccelerometerMessage": ["Ingen", "accelerometer"],
+    "NoPowerDeliveryMessage": ["Ingen USB-PD IC", "hittades!"],
+    "LockingKeysString": "LÅST",
+    "UnlockingKeysString": "UPPLÅST",
+    "WarningKeysLockedString": "!LÅST!",
+    "WarningThermalRunaway": ["Thermal", "Runaway"]
+  },
+  "characters": {
+    "SettingRightChar": "H",
+    "SettingLeftChar": "V",
+    "SettingAutoChar": "A",
+    "SettingOffChar": "A",
+    "SettingSlowChar": "L",
+    "SettingMediumChar": "M",
+    "SettingFastChar": "S",
+    "SettingStartNoneChar": "A",
+    "SettingStartSolderingChar": "L",
+    "SettingStartSleepChar": "V",
+    "SettingStartSleepOffChar": "R",
+    "SettingSensitivityOff": "A",
+    "SettingSensitivityLow": "L",
+    "SettingSensitivityMedium": "M",
+    "SettingSensitivityHigh": "H",
+    "SettingLockDisableChar": "A",
+    "SettingLockBoostChar": "T",
+    "SettingLockFullChar": "F",
+    "SettingNAChar": "N/A"
+  },
+  "menuGroups": {
+    "PowerMenu": {
+      "text2": ["Effekt-", "inställning"],
+      "desc": "Effektinställningar"
+    },
+    "SolderingMenu": {
+      "text2": ["Lödnings-", "inställning"],
+      "desc": "Lödningsinställningar"
+    },
+    "PowerSavingMenu": {
+      "text2": ["Vilo-", "läge"],
+      "desc": "Viloläges-inställningar"
+    },
+    "UIMenu": {
+      "text2": ["Användar-", "gränssnitt"],
+      "desc": "Användargränssnitts-inställningar"
+    },
+    "AdvancedMenu": {
+      "text2": ["Avancerade", "alternativ"],
+      "desc": "Avancerade alternativ"
+    }
+  },
+  "menuOptions": {
+    "DCInCutoff": {
+      "text2": ["Ström-", "källa"],
+      "desc": "Strömkälla. Anger lägsta spänning. (DC 10V) (S 3.3V per cell)"
+    },
+    "SleepTemperature": {
+      "text2": ["Vilo-", "temp"],
+      "desc": "Vilotemperatur (C)"
+    },
+    "SleepTimeout": {
+      "text2": ["Vilo-", "timeout"],
+      "desc": "Vilo-timeout (M=Minuter | S=Sekunder)"
+    },
+    "ShutdownTimeout": {
+      "text2": ["Avstängn.", "timeout"],
+      "desc": "Avstängnings-timeout (Minuter)"
+    },
+    "MotionSensitivity": {
+      "text2": ["Rörelse-", "känslighet"],
+      "desc": "Rörelsekänslighet (0=Av | 1=minst känslig | ... | 9=mest känslig)"
+    },
+    "TemperatureUnit": {
+      "text2": ["Temperatur-", "enheter"],
+      "desc": "Temperaturenhet (C=Celsius | F=Fahrenheit)"
+    },
+    "AdvancedIdle": {
+      "text2": ["Detaljerad", "vid inaktiv"],
+      "desc": "Visa detaljerad information i mindre typsnitt när inaktiv."
+    },
+    "DisplayRotation": {
+      "text2": ["Visnings", "läge"],
+      "desc": "Visningsläge (H=Högerhänt | V=Vänsterhänt | A=Automatisk)"
+    },
+    "BoostTemperature": {
+      "text2": ["Turbo-", "temp"],
+      "desc": "Temperatur i \"turbo\"-läge"
+    },
+    "AutoStart": {
+      "text2": ["Auto", "start"],
+      "desc": "Startar automatiskt lödpennan vid uppstart. (A=Av | L=Lödning | V=Viloläge | R=Viloläge Rumstemperatur)"
+    },
+    "CooldownBlink": {
+      "text2": ["Nedkylnings-", "blink"],
+      "desc": "Blinka temperaturen medan spetsen kyls av och fortfarande är varm."
+    },
+    "TemperatureCalibration": {
+      "text2": ["Kalibrera", "temperatur?"],
+      "desc": "Kalibrera spets-kompensation."
+    },
+    "SettingsReset": {
+      "text2": ["Fabriks-", "inställ?"],
+      "desc": "Återställ alla inställningar"
+    },
+    "VoltageCalibration": {
+      "text2": ["Kalibrera", "inspänning?"],
+      "desc": "Inspänningskalibrering. Knapparna justerar, håll inne för avslut"
+    },
+    "AdvancedSoldering": {
+      "text2": ["Detaljerad", "lödng.skärm"],
+      "desc": "Visa detaljerad information vid lödning"
+    },
+    "ScrollingSpeed": {
+      "text2": ["Beskrivning", "rullhast."],
+      "desc": "Hastighet som den här texten rullar i"
+    },
+    "QCMaxVoltage": {
+      "text2": ["QC", "spänning"],
+      "desc": "Maximal QC-spänning enheten skall efterfråga"
+    },
+    "PDNegTimeout": {
+      "text2": ["PD", "timeout"],
+      "desc": "PD negotiation timeout in 100ms steps for compatibility with some QC chargers (0: disabled)"
+    },
+    "PowerLimit": {
+      "text2": ["Max-", "effekt"],
+      "desc": "Maximal effekt som enheten kan använda (Watt)"
+    },
+    "ReverseButtonTempChange": {
+      "text2": ["Omvända", "+- knappar"],
+      "desc": "Omvänd ordning för temperaturjustering via plus/minus knapparna"
+    },
+    "TempChangeShortStep": {
+      "text2": ["Temp.just", "korttryck"],
+      "desc": "Temperaturjustering vid kort knapptryckning"
+    },
+    "TempChangeLongStep": {
+      "text2": ["Temp.just", "långtryck"],
+      "desc": "Temperaturjustering vid lång knapptryckning"
+    },
+    "PowerPulsePower": {
+      "text2": ["Power", "Pulse W"],
+      "desc": "Keep awake pulse power intensity"
+    },
+    "HallEffSensitivity": {
+      "text2": ["Sensor-", "känslght"],
+      "desc": "Känslighet för halleffekt-sensorn för viloläges-detektering (A=Av | L=Låg | M=Medium | H=Hög)"
+    },
+    "LockingMode": {
+      "text2": ["Tillåt lås", "via knappar"],
+      "desc": "Vid lödning, håll nere bägge knappar för att slå på lås (A=Av | T=Bara turbo | F=Fullt lås)"
+    },
+    "MinVolCell": {
+      "text2": ["Minimim-", "spänning"],
+      "desc": "Minimumspänning per cell (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)"
+    },
+    "AnimLoop": {
+      "text2": ["Anim.", "loop"],
+      "desc": "Loopa animationer i huvudmeny"
+    },
+    "AnimSpeed": {
+      "text2": ["Anim.-", "hastighet"],
+      "desc": "Animationshastighet för ikoner i menyer (A=av | L=långsam | M=medel | S=snabb)"
+    },
+    "PowerPulseWait": {
+      "text2": ["Power pulse", "wait time"],
+      "desc": "Time to wait before triggering every keep-awake pulse (x 2.5s)"
+    },
+    "PowerPulseDuration": {
+      "text2": ["Power pulse", "duration"],
+      "desc": "Keep-awake-pulse duration (x 250ms)"
+    },
+    "LanguageSwitch": {
+      "text2": ["Språk:", " SV     Svenska"],
+      "desc": ""
+    },
+    "Brightness": {
+      "text2": ["Screen", "Brightness"],
+      "desc": "Adjust the contrast/brightness of the OLED screen"
+    },
+    "ColourInversion": {
+      "text2": ["Screen", "Invert"],
+      "desc": "Invert the colours of the OLED screen"
+    }
+  }
+}

Translations/translation_TR.json

@@ -0,0 +1,225 @@
+{
+  "languageCode": "TR",
+  "languageLocalName": "Türkçe",
+  "fonts": ["ascii_basic", "latin_extended"],
+  "messages": {
+    "SettingsCalibrationDone": "Kalibrasyon tamamlandı!",
+    "SettingsCalibrationWarning": "Lütfen devam etmeden önce ucun oda sıcaklığında olduğunu garantiye alın!",
+    "SettingsResetWarning": "Ayarları varsayılan değerlere sıfırlamak istediğinizden emin misiniz?",
+    "UVLOWarningString": "Güç Az",
+    "UndervoltageString": "Düşük Voltaj",
+    "InputVoltageString": "Giriş V: ",
+    "WarningTipTempString": "Uç Sıcaklığı: ",
+    "BadTipString": "KÖTÜ UÇ",
+    "SleepingSimpleString": "Zzzz",
+    "SleepingAdvancedString": "Bekleme Modu ...",
+    "WarningSimpleString": "SICAK!",
+    "WarningAdvancedString": "UYARI! UÇ SICAK!",
+    "SleepingTipAdvancedString": "Uç:",
+    "IdleTipString": "Uç:",
+    "IdleSetString": " Ayarla:",
+    "TipDisconnectedString": "UÇ ÇIKARILDI",
+    "SolderingAdvancedPowerPrompt": "Güç: ",
+    "OffString": "Kapalı",
+    "YourGainMessage": "Kazancınız:"
+  },
+  "messagesWarn": {
+    "ResetOKMessage": ["Sıfırlama Tamam", ""],
+    "SettingsResetMessage": ["Ayarlar", "Sıfırlandı"],
+    "NoAccelerometerMessage": ["No accelerometer", "detected!"],
+    "NoPowerDeliveryMessage": ["No USB-PD IC", "detected!"],
+    "LockingKeysString": "LOCKED",
+    "UnlockingKeysString": "UNLOCKED",
+    "WarningKeysLockedString": "!LOCKED!",
+    "WarningThermalRunaway": ["Thermal", "Runaway"]
+  },
+  "characters": {
+    "SettingRightChar": "R",
+    "SettingLeftChar": "L",
+    "SettingAutoChar": "A",
+    "SettingOffChar": "O",
+    "SettingSlowChar": "S",
+    "SettingMediumChar": "M",
+    "SettingFastChar": "F",
+    "SettingStartNoneChar": "K",
+    "SettingStartSolderingChar": "L",
+    "SettingStartSleepChar": "U",
+    "SettingStartSleepOffChar": "O",
+    "SettingSensitivityOff": "O",
+    "SettingSensitivityLow": "L",
+    "SettingSensitivityMedium": "M",
+    "SettingSensitivityHigh": "H",
+    "SettingLockDisableChar": "D",
+    "SettingLockBoostChar": "B",
+    "SettingLockFullChar": "F",
+    "SettingNAChar": "N/A"
+  },
+  "menuGroups": {
+    "PowerMenu": {
+      "text2": ["Power", "settings"],
+      "desc": "Power settings"
+    },
+    "SolderingMenu": {
+      "text2": ["Lehimleme", "Ayarları"],
+      "desc": "Lehimleme Ayarları"
+    },
+    "PowerSavingMenu": {
+      "text2": ["Uyku", "Modları"],
+      "desc": "Güç Tasarrufu Ayarları"
+    },
+    "UIMenu": {
+      "text2": ["Kullanıcı", "Arayüzü"],
+      "desc": "Kullanıcı Arayüzü Ayarları"
+    },
+    "AdvancedMenu": {
+      "text2": ["Gelişmiş", "Ayarlar"],
+      "desc": "Gelişmiş Ayarlar"
+    }
+  },
+  "menuOptions": {
+    "DCInCutoff": {
+      "text2": ["GÇKYN", ""],
+      "desc": "\"Güç Kaynağı\". En düşük çalışma voltajını ayarlar. (DC 10V) (S 3.3V hücre başına)"
+    },
+    "SleepTemperature": {
+      "text2": ["BKSC", ""],
+      "desc": "Bekleme Modu Sıcaklığı (C)"
+    },
+    "SleepTimeout": {
+      "text2": ["BMZA", ""],
+      "desc": "Bekleme Modu Zaman Aşımı (Dakika | Saniye)"
+    },
+    "ShutdownTimeout": {
+      "text2": ["KPTZA", ""],
+      "desc": "Kapatma Zaman Aşımı (Dakika)"
+    },
+    "MotionSensitivity": {
+      "text2": ["HARHAS", ""],
+      "desc": "Hareket Hassasiyeti (0=Kapalı | 1=En az duyarlı | ... | 9=En duyarlı)"
+    },
+    "TemperatureUnit": {
+      "text2": ["SCKBRM", ""],
+      "desc": "Sıcaklık Birimi (C=Celsius | F=Fahrenheit)"
+    },
+    "AdvancedIdle": {
+      "text2": ["AYRBİL", ""],
+      "desc": "Boş ekranda ayrıntılı bilgileri daha küçük bir yazı tipi ile göster."
+    },
+    "DisplayRotation": {
+      "text2": ["GRNYÖN", ""],
+      "desc": "Görüntü Yönlendirme (R=Sağlak | L=Solak | A=Otomatik)"
+    },
+    "BoostEnabled": {
+      "text2": ["YÜKPER", ""],
+      "desc": "Lehimleme yaparken ön tuşa basmak anlık sıcaklık yükselişi sağlar. (450C)"
+    },
+    "BoostTemperature": {
+      "text2": ["YKSC", ""],
+      "desc": "Yüksek Performans Modu Sıcaklığı"
+    },
+    "AutoStart": {
+      "text2": ["OTOBAŞ", ""],
+      "desc": "Güç verildiğinde otomatik olarak lehimleme modunda başlat. (K=Kapalı | L=Lehimleme Modu | U=Uyku Modu | O=Uyku Modu Oda Sıcaklığı)"
+    },
+    "CooldownBlink": {
+      "text2": ["SĞGÖST", ""],
+      "desc": "Soğutma ekranında uç hala sıcakken derece gösterilsin."
+    },
+    "TemperatureCalibration": {
+      "text2": ["SCK KAL?", ""],
+      "desc": "Ucu kalibre et."
+    },
+    "SettingsReset": {
+      "text2": ["SIFIRLA?", ""],
+      "desc": "Bütün ayarları sıfırlar"
+    },
+    "VoltageCalibration": {
+      "text2": ["VOL KAL?", ""],
+      "desc": "Voltaj Girişi Kalibrasyonu. Düğmeler ayarlar, çıkmak için uzun bas."
+    },
+    "AdvancedSoldering": {
+      "text2": ["GELLHM", ""],
+      "desc": "\"Gelişmiş Lehimleme\" Lehimleme yaparken detaylı bilgi göster"
+    },
+    "ScrollingSpeed": {
+      "text2": ["YZKYHZ", ""],
+      "desc": "Bu yazının kayma hızı (S=Yavaş | F=Hızlı)"
+    },
+    "QCMaxVoltage": {
+      "text2": ["QC", "Voltage"],
+      "desc": "Desired max QC Voltage negotiated for"
+    },
+    "PDNegTimeout": {
+      "text2": ["PD", "timeout"],
+      "desc": "PD negotiation timeout in 100ms steps for compatibility with some QC chargers (0: disabled)"
+    },
+    "PowerInput": {
+      "text2": ["Güç", "Miktarı(W)"],
+      "desc": "Kullanılan adaptörün watt biriminden güç miktarı"
+    },
+    "PowerLimitEnable": {
+      "text2": ["P Limit", "Enable"],
+      "desc": "Güç sınırlamayı aç"
+    },
+    "PowerLimit": {
+      "text2": ["Power", "Limit"],
+      "desc": "Havyanın kullanacağı en yüksek güç (Watts)"
+    },
+    "ReverseButtonTempChange": {
+      "text2": ["Key +-", "reverse?"],
+      "desc": "\"Düğme Yerleri Rotasyonu\" Sıcaklık ayar düğmelerinin yerini değiştirin"
+    },
+    "TempChangeShortStep": {
+      "text2": ["Temp change", "short?"],
+      "desc": "Kısa basışlardaki sıcaklık derecesi atlama oranı"
+    },
+    "TempChangeLongStep": {
+      "text2": ["Temp change", "long?"],
+      "desc": "Uzun başışlardaki sıcaklık derecesi atlama oranı"
+    },
+    "PowerPulsePower": {
+      "text2": ["Power", "Pulse W"],
+      "desc": "Güç girişi voltajı ölçüm yoğunluğunu sık tut."
+    },
+    "HallEffSensitivity": {
+      "text2": ["Hall Eff", "Sensitivity"],
+      "desc": "Sensitivity of the Hall effect sensor in detecting sleep (O=Off | L=Low | M=Medium | H=High)"
+    },
+    "LockingMode": {
+      "text2": ["Allow buttons", "locking"],
+      "desc": "When soldering, long press on both buttons lock them (D=Disable | B=Boost only | F=Full locking)"
+    },
+    "MinVolCell": {
+      "text2": ["Minimum", "voltage"],
+      "desc": "Minimum allowed voltage per cell (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)"
+    },
+    "AnimLoop": {
+      "text2": ["Anim.", "loop"],
+      "desc": "Loop icon animations in root menu"
+    },
+    "AnimSpeed": {
+      "text2": ["Anim.", "speed"],
+      "desc": "Speed of icon animations in menu (O=off | L=low | M=medium | H=high)"
+    },
+    "PowerPulseWait": {
+      "text2": ["Power pulse", "wait time"],
+      "desc": "Time to wait before triggering every keep-awake pulse (x 2.5s)"
+    },
+    "PowerPulseDuration": {
+      "text2": ["Power pulse", "duration"],
+      "desc": "Keep-awake-pulse duration (x 250ms)"
+    },
+    "LanguageSwitch": {
+      "text2": ["Dil:", " TR      Türkçe"],
+      "desc": ""
+    },
+    "Brightness": {
+      "text2": ["Screen", "Brightness"],
+      "desc": "Adjust the contrast/brightness of the OLED screen"
+    },
+    "ColourInversion": {
+      "text2": ["Screen", "Invert"],
+      "desc": "Invert the colours of the OLED screen"
+    }
+  }
+}

Translations/translation_UK.json

@@ -0,0 +1,213 @@
+{
+  "languageCode": "UK",
+  "languageLocalName": "Українська",
+  "fonts": ["ascii_basic", "latin_extended", "cyrillic"],
+  "messages": {
+    "SettingsCalibrationDone": "Калібрування виконане!",
+    "SettingsCalibrationWarning": "Переконайтеся, що жало охололо до кімнатної температури, перш ніж продовжувати!",
+    "SettingsResetWarning": "Ви дійсно хочете скинути налаштування до значень за замовчуванням? (A=Так, В=Ні)",
+    "UVLOWarningString": "АККУМ--",
+    "UndervoltageString": "Низька напруга",
+    "InputVoltageString": "Жив.(B): ",
+    "WarningTipTempString": "Жало t°: ",
+    "BadTipString": "ЖАЛО--",
+    "SleepingSimpleString": "ZzZzz",
+    "SleepingAdvancedString": "Очікування...",
+    "WarningSimpleString": "ГАРЯЧЕ!",
+    "WarningAdvancedString": "!!! ГАРЯЧЕ !!!\n!!! ЖАЛО !!!",
+    "SleepingTipAdvancedString": "Жало:",
+    "IdleTipString": "Жало:",
+    "IdleSetString": " ->",
+    "TipDisconnectedString": "Жало вимкнено!",
+    "SolderingAdvancedPowerPrompt": "Живлення: ",
+    "OffString": "Вимк",
+    "YourGainMessage": "Приріст:"
+  },
+  "messagesWarn": {
+    "ResetOKMessage": "Скид. OK",
+    "SettingsResetMessage": ["Налаштування", "скинуті!"],
+    "NoAccelerometerMessage": ["Акселерометр", "не виявлено!"],
+    "NoPowerDeliveryMessage": ["USB-PD IC", "не виявлено!"],
+    "LockingKeysString": "ЗАБЛОК.",
+    "UnlockingKeysString": "РОЗБЛОК.",
+    "WarningKeysLockedString": "!ЗАБЛОК!",
+    "WarningThermalRunaway": ["Thermal", "Runaway"]
+  },
+  "characters": {
+    "SettingRightChar": "П",
+    "SettingLeftChar": "Л",
+    "SettingAutoChar": "A",
+    "SettingOffChar": "B",
+    "SettingSlowChar": "П",
+    "SettingMediumChar": "M",
+    "SettingFastChar": "Ш",
+    "SettingStartNoneChar": "В",
+    "SettingStartSolderingChar": "П",
+    "SettingStartSleepChar": "О",
+    "SettingStartSleepOffChar": "К",
+    "SettingSensitivityOff": "В",
+    "SettingSensitivityLow": "Н",
+    "SettingSensitivityMedium": "С",
+    "SettingSensitivityHigh": "М",
+    "SettingLockDisableChar": "В",
+    "SettingLockBoostChar": "Т",
+    "SettingLockFullChar": "П",
+    "SettingNAChar": "Н/Д"
+  },
+  "menuGroups": {
+    "PowerMenu": {
+      "text2": ["Параметри", "живлення"],
+      "desc": "Джерело живлення, та мінамільна напруга на комірку"
+    },
+    "SolderingMenu": {
+      "text2": ["Параметри", "пайки"],
+      "desc": "Налаштування для режиму пайки. Діють при увімкненому жалі."
+    },
+    "PowerSavingMenu": {
+      "text2": ["Режим", "сну"],
+      "desc": "Налаштування при бездіяльності. Корисно що б не обпектися і з часом не спалити житло."
+    },
+    "UIMenu": {
+      "text2": ["Параметри", "інтерфейсу"],
+      "desc": "Параметри користувальницького інтерфейсу."
+    },
+    "AdvancedMenu": {
+      "text2": ["Додаткові", "параметри"],
+      "desc": "Розширені налаштування. Додаткові зручності."
+    }
+  },
+  "menuOptions": {
+    "DCInCutoff": {
+      "text2": ["Джерело", "живлення"],
+      "desc": "Встановлює напругу відсічки. (DC - 10V) (3S - 9.9V | 4S - 13.2V | 5S - 16.5V | 6S - 19.8V)"
+    },
+    "SleepTemperature": {
+      "text2": ["Темпер.", "сну"],
+      "desc": "Температура режиму очікування (C° | F°)"
+    },
+    "SleepTimeout": {
+      "text2": ["Тайм-аут", "сну"],
+      "desc": "Час до переходу в режим очікування (Хвилини | Секунди)"
+    },
+    "ShutdownTimeout": {
+      "text2": ["Часу до", "вимкнення"],
+      "desc": "Час до вимкнення (Хвилини)"
+    },
+    "MotionSensitivity": {
+      "text2": ["Чутливість", "сенсору руху"],
+      "desc": "Акселерометр (0=Вимк. | 1=мін. чутливості | ... | 9=макс. чутливості)"
+    },
+    "TemperatureUnit": {
+      "text2": ["Формат темпе-", "ратури(C°/F°)"],
+      "desc": "Одиниця виміру температури (C=Цельсій | F=Фаренгейт)"
+    },
+    "AdvancedIdle": {
+      "text2": ["Детальний ре-", "жим очікуван."],
+      "desc": "Показувати детальну інформацію маленьким шрифтом на домашньому екрані"
+    },
+    "DisplayRotation": {
+      "text2": ["Автоповорот", "екрану"],
+      "desc": "Орієнтація дисплея (П=Правша | Л=Лівша | A=Автоповорот)"
+    },
+    "BoostTemperature": {
+      "text2": ["Темпер.", "Турбо"],
+      "desc": "Температура в \"Турбо\" режимі"
+    },
+    "AutoStart": {
+      "text2": ["Гарячий", "старт"],
+      "desc": "Режим в якому запускається паяльник при ввімкненні (В=Вимк. | П=Пайка | О=Очікування | К=Очікування при кімн. темп.)"
+    },
+    "CooldownBlink": {
+      "text2": ["Показ t° при", "охолодженні"],
+      "desc": "Показувати температуру на екрані охолодження, поки жало залишається гарячим, при цьому екран моргає"
+    },
+    "TemperatureCalibration": {
+      "text2": ["Калібрування", "температури"],
+      "desc": "Калібрування температурного датчика."
+    },
+    "SettingsReset": {
+      "text2": ["Скинути всі", "налаштування?"],
+      "desc": "Скидання всіх параметрів до стандартних значень."
+    },
+    "VoltageCalibration": {
+      "text2": ["Калібрування", "напруги"],
+      "desc": "Калібрування напруги входу. Налаштувати кнопками, натиснути і утримати щоб завершити."
+    },
+    "AdvancedSoldering": {
+      "text2": ["Детальний", "режим пайки"],
+      "desc": "Показувати детальну інформацію при пайці."
+    },
+    "ScrollingSpeed": {
+      "text2": ["Швидкість", "тексту"],
+      "desc": "Швидкість прокрутки тексту (П=повільно | Ш=швидко)"
+    },
+    "QCMaxVoltage": {
+      "text2": ["Потужність", "дж. живлення"],
+      "desc": "Потужність джерела живлення в Ватах"
+    },
+    "PDNegTimeout": {
+      "text2": ["PD", "timeout"],
+      "desc": "PD negotiation timeout in 100ms steps for compatibility with some QC chargers (0: disabled)"
+    },
+    "PowerLimit": {
+      "text2": ["Макс.", "потуж."],
+      "desc": "Макс. потужність, яку може використовувати паяльник (Ват)"
+    },
+    "ReverseButtonTempChange": {
+      "text2": ["Інвертувати", "кнопки +-?"],
+      "desc": "Інвертувати кнопки зміни температури."
+    },
+    "TempChangeShortStep": {
+      "text2": ["Зміна темп.", "коротко?"],
+      "desc": "Змінювати температуру при короткому натисканні!"
+    },
+    "TempChangeLongStep": {
+      "text2": ["Зміна темп.", "довго?"],
+      "desc": "Змінювати температуру при довгому натисканні!"
+    },
+    "PowerPulsePower": {
+      "text2": ["Пульс.", "Навантаж."],
+      "desc": "Деякі PowerBank-и з часом вимк. живлення, якщо пристрій споживає дуже мало енергії)"
+    },
+    "HallEffSensitivity": {
+      "text2": ["Чутливість", "Ефекту Холла"],
+      "desc": "Чутливість датчика ефекту Холла при виявленні сну (В=Вимк | Н=Низький | С=Середній | М=Макс)"
+    },
+    "LockingMode": {
+      "text2": ["Дозволити", "блок. кнопок"],
+      "desc": "Під час пайки тривале натискання обох кнопок заблокує їх (В=Вимк | Т=Тільки турбо | П=Повне)"
+    },
+    "MinVolCell": {
+      "text2": ["Мін.", "напруга"],
+      "desc": "Мінімальна дозволена напруга на комірку (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)"
+    },
+    "AnimLoop": {
+      "text2": ["Зациклена", "анімація"],
+      "desc": "Зациклена анімація іконок в головному меню"
+    },
+    "AnimSpeed": {
+      "text2": ["Швидкість", "анімації"],
+      "desc": "Швидкість анімації іконок у головному меню (Мілісекунди) (В=Вимк | Н=Низькa | С=Середня | М=Макс)"
+    },
+    "PowerPulseWait": {
+      "text2": ["Час між імп.", "напруги"],
+      "desc": "Час між імпульсами напруги яка не дає PowerBank-у заснути (x 2.5с)"
+    },
+    "PowerPulseDuration": {
+      "text2": ["Тривалість", "імп. напруги"],
+      "desc": "Тривалість імпульсу напруги яка не дає PowerBank-у заснути (x 250мс)"
+    },
+    "LanguageSwitch": {
+      "text2": ["Мова:", " UK  Українська"],
+      "desc": ""
+    },
+    "Brightness": {
+      "text2": ["Screen", "Brightness"],
+      "desc": "Adjust the contrast/brightness of the OLED screen"
+    },
+    "ColourInversion": {
+      "text2": ["Screen", "Invert"],
+      "desc": "Invert the colours of the OLED screen"
+    }
+  }
+}

Translations/translation_YUE_HK.json

@@ -0,0 +1,208 @@
+{
+  "languageCode": "YUE_HK",
+  "languageLocalName": "廣東話 (香港)",
+  "fonts": ["ascii_basic", "cjk"],
+  "tempUnitFahrenheit": true,
+  "messages": {
+    "SettingsCalibrationWarning": "開始温度校正之前，請先確定辣雞咀係處於室温！",
+    "SettingsResetWarning": "你係咪確定要將全部設定重設到預設值？",
+    "UVLOWarningString": "電壓過低",
+    "UndervoltageString": "Undervoltage",
+    "InputVoltageString": "Input V: ",
+    "SleepingSimpleString": "Zzzz",
+    "SleepingAdvancedString": "Sleeping...",
+    "SleepingTipAdvancedString": "Tip:",
+    "IdleTipString": "Tip:",
+    "IdleSetString": " Set:",
+    "TipDisconnectedString": "NO TIP",
+    "SolderingAdvancedPowerPrompt": "Power: ",
+    "OffString": "關"
+  },
+  "messagesWarn": {
+    "ResetOKMessage": "已重設！",
+    "SettingsResetMessage": "設定已被重設！",
+    "NoAccelerometerMessage": ["No accelerometer", "detected!"],
+    "NoPowerDeliveryMessage": ["No USB-PD IC", "detected!"],
+    "LockingKeysString": "已鎖定",
+    "UnlockingKeysString": "已解除鎖定",
+    "WarningKeysLockedString": "!撳掣鎖定!",
+    "WarningThermalRunaway": "加熱失控"
+  },
+  "characters": {
+    "SettingRightChar": "右",
+    "SettingLeftChar": "左",
+    "SettingAutoChar": "自",
+    "SettingOffChar": "關",
+    "SettingSlowChar": "慢",
+    "SettingMediumChar": "中",
+    "SettingFastChar": "快",
+    "SettingStartNoneChar": "無",
+    "SettingStartSolderingChar": "焊",
+    "SettingStartSleepChar": "待",
+    "SettingStartSleepOffChar": "室",
+    "SettingSensitivityOff": "關",
+    "SettingSensitivityLow": "低",
+    "SettingSensitivityMedium": "中",
+    "SettingSensitivityHigh": "高",
+    "SettingLockDisableChar": "無",
+    "SettingLockBoostChar": "增",
+    "SettingLockFullChar": "全",
+    "SettingNAChar": "不適用"
+  },
+  "menuGroups": {
+    "PowerMenu": {
+      "text2": "電源設定",
+      "desc": "電源設定"
+    },
+    "SolderingMenu": {
+      "text2": "焊接設定",
+      "desc": "焊接設定"
+    },
+    "PowerSavingMenu": {
+      "text2": "待機設定",
+      "desc": "自動待機慳電設定"
+    },
+    "UIMenu": {
+      "text2": "使用者介面",
+      "desc": "使用者介面設定"
+    },
+    "AdvancedMenu": {
+      "text2": "進階設定",
+      "desc": "進階設定"
+    }
+  },
+  "menuOptions": {
+    "DCInCutoff": {
+      "text2": "電源",
+      "desc": "輸入電源；設定自動停機電壓 <DC 10V> <S 鋰電池，以每粒3.3V計算；依個設定會停用功率限制>"
+    },
+    "SleepTemperature": {
+      "text2": "待機温度",
+      "desc": "喺待機模式時嘅辣雞咀温度"
+    },
+    "SleepTimeout": {
+      "text2": "待機延時",
+      "desc": "自動進入待機模式前嘅閒置等候時間 <S=秒 | M=分鐘>"
+    },
+    "ShutdownTimeout": {
+      "text2": "自動熄機",
+      "desc": "自動熄機前嘅閒置等候時間 <M=分鐘>"
+    },
+    "MotionSensitivity": {
+      "text2": "動作敏感度",
+      "desc": "0=停用 | 1=最低敏感度 | ... | 9=最高敏感度"
+    },
+    "TemperatureUnit": {
+      "text2": "温度單位",
+      "desc": "C=攝氏 | F=華氏"
+    },
+    "AdvancedIdle": {
+      "text2": "詳細閒置畫面",
+      "desc": "喺閒置畫面以英文細字顯示詳細嘅資料"
+    },
+    "DisplayRotation": {
+      "text2": "畫面方向",
+      "desc": "右=使用右手 | 左=使用左手 | 自=自動"
+    },
+    "BoostTemperature": {
+      "text2": "增熱温度",
+      "desc": "喺增熱模式時使用嘅温度"
+    },
+    "AutoStart": {
+      "text2": "自動啓用",
+      "desc": "開機時自動啓用 <無=停用 | 焊=焊接模式 | 待=待機模式 | 室=室温待機>"
+    },
+    "CooldownBlink": {
+      "text2": "降温時閃爍",
+      "desc": "停止加熱之後，當辣雞咀仲係熱嗰陣閃爍畫面"
+    },
+    "TemperatureCalibration": {
+      "text2": "温度校正？",
+      "desc": "開始校正辣雞咀温度位移"
+    },
+    "SettingsReset": {
+      "text2": "全部重設？",
+      "desc": "將所有設定重設到預設值"
+    },
+    "VoltageCalibration": {
+      "text2": "輸入電壓校正？",
+      "desc": "開始校正VIN輸入電壓 <長撳以退出>"
+    },
+    "AdvancedSoldering": {
+      "text2": "詳細焊接畫面",
+      "desc": "喺焊接模式畫面以英文細字顯示詳細嘅資料"
+    },
+    "ScrollingSpeed": {
+      "text2": "捲動速度",
+      "desc": "解說文字嘅捲動速度"
+    },
+    "QCMaxVoltage": {
+      "text2": "QC電壓",
+      "desc": "使用QC電源時請求嘅最高目標電壓"
+    },
+    "PDNegTimeout": {
+      "text2": "PD逾時",
+      "desc": "設定USB PD協定交涉嘅逾時時限；為兼容某啲QC電源而設 <x100ms（亳秒）>"
+    },
+    "PowerLimit": {
+      "text2": "功率限制",
+      "desc": "限制辣雞可用嘅最大功率 <W=watt（火）>"
+    },
+    "ReverseButtonTempChange": {
+      "text2": "反轉加減掣",
+      "desc": "反轉調校温度時加減掣嘅方向"
+    },
+    "TempChangeShortStep": {
+      "text2": "温度調整 短",
+      "desc": "調校温度時短撳一下嘅温度變幅"
+    },
+    "TempChangeLongStep": {
+      "text2": "温度調整 長",
+      "desc": "調校温度時長撳嘅温度變幅"
+    },
+    "PowerPulsePower": {
+      "text2": "電源脈衝",
+      "desc": "為保持電源喚醒而通電所用嘅功率 <watt（火）>"
+    },
+    "HallEffSensitivity": {
+      "text2": "磁場敏感度",
+      "desc": "磁場感應器用嚟啓動待機模式嘅敏感度 <關=停用 | 低=最低敏感度 | 中=中等敏感度 | 高=最高敏感度>"
+    },
+    "LockingMode": {
+      "text2": "撳掣鎖定",
+      "desc": "喺焊接模式時，同時長撳兩粒掣啓用撳掣鎖定 <無=停用 | 增=淨係容許增熱模式 | 全=鎖定全部>"
+    },
+    "MinVolCell": {
+      "text2": "最低電壓",
+      "desc": "每粒電池嘅最低可用電壓 <伏特> <3S: 3.0V - 3.7V, 4/5/6S: 2.4V - 3.7V>"
+    },
+    "AnimLoop": {
+      "text2": "動畫循環",
+      "desc": "循環顯示功能表圖示動畫"
+    },
+    "AnimSpeed": {
+      "text2": "動畫速度",
+      "desc": "功能表圖示動畫嘅速度 <關=不顯示動畫 | 慢=慢速 | 中=中速 | 快=快速>"
+    },
+    "PowerPulseWait": {
+      "text2": "電源脈衝間隔",
+      "desc": "為保持電源喚醒，每次通電之間嘅間隔時間 <x2.5s（秒）>"
+    },
+    "PowerPulseDuration": {
+      "text2": "電源脈衝時長",
+      "desc": "為保持電源喚醒，每次通電脈衝嘅時間長度 <x250ms（亳秒）>"
+    },
+    "LanguageSwitch": {
+      "text2": "語言： 廣東話",
+      "desc": ""
+    },
+    "Brightness": {
+      "text2": "熒幕亮度",
+      "desc": "設定OLED熒幕嘅亮度"
+    },
+    "ColourInversion": {
+      "text2": "熒幕反轉色",
+      "desc": "反轉OLED熒幕嘅黑白色"
+    }
+  }
+}

Translations/translation_ZH_CN.json

@@ -0,0 +1,208 @@
+{
+  "languageCode": "ZH_CN",
+  "languageLocalName": "简体中文",
+  "fonts": ["ascii_basic", "cjk"],
+  "tempUnitFahrenheit": true,
+  "messages": {
+    "SettingsCalibrationWarning": "开始温度校正前，请先确定铬铁头正处于室温！",
+    "SettingsResetWarning": "你是否确定要将全部设置重置为默认值？",
+    "UVLOWarningString": "电压过低",
+    "UndervoltageString": "Undervoltage",
+    "InputVoltageString": "Input V: ",
+    "SleepingSimpleString": "Zzzz",
+    "SleepingAdvancedString": "Sleeping...",
+    "SleepingTipAdvancedString": "Tip:",
+    "IdleTipString": "Tip:",
+    "IdleSetString": " Set:",
+    "TipDisconnectedString": "NO TIP",
+    "SolderingAdvancedPowerPrompt": "Power: ",
+    "OffString": "关"
+  },
+  "messagesWarn": {
+    "ResetOKMessage": "已重置！",
+    "SettingsResetMessage": "设置已被重置！",
+    "NoAccelerometerMessage": ["No accelerometer", "detected!"],
+    "NoPowerDeliveryMessage": ["No USB-PD IC", "detected!"],
+    "LockingKeysString": "已锁定",
+    "UnlockingKeysString": "已解除锁定",
+    "WarningKeysLockedString": "!按键锁定!",
+    "WarningThermalRunaway": "加热失控"
+  },
+  "characters": {
+    "SettingRightChar": "右",
+    "SettingLeftChar": "左",
+    "SettingAutoChar": "自",
+    "SettingOffChar": "关",
+    "SettingSlowChar": "慢",
+    "SettingMediumChar": "中",
+    "SettingFastChar": "快",
+    "SettingStartNoneChar": "无",
+    "SettingStartSolderingChar": "焊",
+    "SettingStartSleepChar": "待",
+    "SettingStartSleepOffChar": "室",
+    "SettingSensitivityOff": "关",
+    "SettingSensitivityLow": "低",
+    "SettingSensitivityMedium": "中",
+    "SettingSensitivityHigh": "高",
+    "SettingLockDisableChar": "无",
+    "SettingLockBoostChar": "增",
+    "SettingLockFullChar": "全",
+    "SettingNAChar": "不适用"
+  },
+  "menuGroups": {
+    "PowerMenu": {
+      "text2": "电源设置",
+      "desc": "电源设置"
+    },
+    "SolderingMenu": {
+      "text2": "焊接设置",
+      "desc": "焊接设置"
+    },
+    "PowerSavingMenu": {
+      "text2": "待机设置",
+      "desc": "自动待机省电设置"
+    },
+    "UIMenu": {
+      "text2": "使用者介面",
+      "desc": "使用者介面设置"
+    },
+    "AdvancedMenu": {
+      "text2": "进阶设置",
+      "desc": "进阶设置"
+    }
+  },
+  "menuOptions": {
+    "DCInCutoff": {
+      "text2": "电源",
+      "desc": "输入电源；设置自动停机电压 <DC 10V> <S 锂电池，以每颗3.3V计算；此设置会禁用功率限制>"
+    },
+    "SleepTemperature": {
+      "text2": "待机温度",
+      "desc": "于待机模式时的铬铁头温度"
+    },
+    "SleepTimeout": {
+      "text2": "待机延时",
+      "desc": "自动进入待机模式前的闲置等候时间 <S=秒 | M=分钟>"
+    },
+    "ShutdownTimeout": {
+      "text2": "自动关机",
+      "desc": "自动关机前的闲置等候时间 <M=分钟>"
+    },
+    "MotionSensitivity": {
+      "text2": "动作灵敏度",
+      "desc": "0=禁用 | 1=最低灵敏度 | ... | 9=最高灵敏度"
+    },
+    "TemperatureUnit": {
+      "text2": "温标",
+      "desc": "C=摄氏 | F=华氏"
+    },
+    "AdvancedIdle": {
+      "text2": "详细闲置画面",
+      "desc": "于闲置画面以英语小字显示详细信息"
+    },
+    "DisplayRotation": {
+      "text2": "画面方向",
+      "desc": "右=使用右手 | 左=使用左手 | 自=自动"
+    },
+    "BoostTemperature": {
+      "text2": "增热温度",
+      "desc": "于增热模式时使用的温度"
+    },
+    "AutoStart": {
+      "text2": "自动启用",
+      "desc": "开机时自动启用 <无=禁用 | 焊=焊接模式 | 待=待机模式 | 室=室温待机>"
+    },
+    "CooldownBlink": {
+      "text2": "降温时闪烁",
+      "desc": "停止加热之后，当铬铁头仍处于高温时闪烁画面"
+    },
+    "TemperatureCalibration": {
+      "text2": "温度校正？",
+      "desc": "开始校正铬铁头温度位移"
+    },
+    "SettingsReset": {
+      "text2": "全部重置？",
+      "desc": "将所有设置重置为默认值"
+    },
+    "VoltageCalibration": {
+      "text2": "输入电压校正？",
+      "desc": "开始校正VIN输入电压 <长按以退出>"
+    },
+    "AdvancedSoldering": {
+      "text2": "详细焊接画面",
+      "desc": "于焊接模式画面以英语小字显示详细信息"
+    },
+    "ScrollingSpeed": {
+      "text2": "卷动速度",
+      "desc": "解说文字的卷动速度"
+    },
+    "QCMaxVoltage": {
+      "text2": "QC电压",
+      "desc": "使用QC电源时请求的最高目标电压"
+    },
+    "PDNegTimeout": {
+      "text2": "PD超时",
+      "desc": "设定USB PD协议交涉的超时时限；为兼容某些QC电源而设 <x100ms（亳秒）>"
+    },
+    "PowerLimit": {
+      "text2": "功率限制",
+      "desc": "限制铬铁可用的最大功率 <W=watt（瓦特）>"
+    },
+    "ReverseButtonTempChange": {
+      "text2": "调换加减键",
+      "desc": "调校温度时调换加减键的方向"
+    },
+    "TempChangeShortStep": {
+      "text2": "温度调整 短",
+      "desc": "调校温度时短按一下的温度变幅"
+    },
+    "TempChangeLongStep": {
+      "text2": "温度调整 长",
+      "desc": "调校温度时长按按键的温度变幅"
+    },
+    "PowerPulsePower": {
+      "text2": "电源脉冲",
+      "desc": "为保持电源唤醒而通电所用的功率 <watt（瓦特）>"
+    },
+    "HallEffSensitivity": {
+      "text2": "磁场灵敏度",
+      "desc": "磁场感应器用作启动待机模式的灵敏度 <关=禁用 | 低=最低灵敏度 | 中=中等灵敏度 | 高=最高灵敏度>"
+    },
+    "LockingMode": {
+      "text2": "按键锁定",
+      "desc": "于焊接模式时，同时长按两个按键启用按键锁定 <无=禁用 | 增=只容许增热模式 | 全=锁定全部>"
+    },
+    "MinVolCell": {
+      "text2": "最低电压",
+      "desc": "每颗电池的最低可用电压 <伏特> <3S: 3.0V - 3.7V, 4/5/6S: 2.4V - 3.7V>"
+    },
+    "AnimLoop": {
+      "text2": "动画循环",
+      "desc": "循环显示功能表图示动画"
+    },
+    "AnimSpeed": {
+      "text2": "动画速度",
+      "desc": "功能表图示动画的速度 <关=不显示动画 | 慢=慢速 | 中=中速 | 快=快速>"
+    },
+    "PowerPulseWait": {
+      "text2": "电源脉冲间隔",
+      "desc": "为保持电源唤醒，每次通电之间的间隔时间 <x2.5s（秒）>"
+    },
+    "PowerPulseDuration": {
+      "text2": "电源脉冲时长",
+      "desc": "为保持电源唤醒，每次通电脉冲的时间长度 <x250ms（亳秒）>"
+    },
+    "LanguageSwitch": {
+      "text2": "语言：简体中文",
+      "desc": ""
+    },
+    "Brightness": {
+      "text2": "屏幕亮度",
+      "desc": "设定OLED屏幕的亮度"
+    },
+    "ColourInversion": {
+      "text2": "螢幕反轉色",
+      "desc": "反转OLED屏幕的黑白色彩"
+    }
+  }
+}

Translations/translation_ZH_TW.json

@@ -0,0 +1,208 @@
+{
+  "languageCode": "ZH_TW",
+  "languageLocalName": "正體中文",
+  "fonts": ["ascii_basic", "cjk"],
+  "tempUnitFahrenheit": true,
+  "messages": {
+    "SettingsCalibrationWarning": "開始溫度校正前，請先確定鉻鐵頭正處於室溫！",
+    "SettingsResetWarning": "你是否確定要將全部設定重設到預設值？",
+    "UVLOWarningString": "電壓過低",
+    "UndervoltageString": "Undervoltage",
+    "InputVoltageString": "Input V: ",
+    "SleepingSimpleString": "Zzzz",
+    "SleepingAdvancedString": "Sleeping...",
+    "SleepingTipAdvancedString": "Tip:",
+    "IdleTipString": "Tip:",
+    "IdleSetString": " Set:",
+    "TipDisconnectedString": "NO TIP",
+    "SolderingAdvancedPowerPrompt": "Power: ",
+    "OffString": "關"
+  },
+  "messagesWarn": {
+    "ResetOKMessage": "已重設！",
+    "SettingsResetMessage": "設定已被重設！",
+    "NoAccelerometerMessage": ["No accelerometer", "detected!"],
+    "NoPowerDeliveryMessage": ["No USB-PD IC", "detected!"],
+    "LockingKeysString": "已鎖定",
+    "UnlockingKeysString": "已解除鎖定",
+    "WarningKeysLockedString": "!按鍵鎖定!",
+    "WarningThermalRunaway": "加熱失控"
+  },
+  "characters": {
+    "SettingRightChar": "右",
+    "SettingLeftChar": "左",
+    "SettingAutoChar": "自",
+    "SettingOffChar": "關",
+    "SettingSlowChar": "慢",
+    "SettingMediumChar": "中",
+    "SettingFastChar": "快",
+    "SettingStartNoneChar": "無",
+    "SettingStartSolderingChar": "焊",
+    "SettingStartSleepChar": "待",
+    "SettingStartSleepOffChar": "室",
+    "SettingSensitivityOff": "關",
+    "SettingSensitivityLow": "低",
+    "SettingSensitivityMedium": "中",
+    "SettingSensitivityHigh": "高",
+    "SettingLockDisableChar": "無",
+    "SettingLockBoostChar": "增",
+    "SettingLockFullChar": "全",
+    "SettingNAChar": "不適用"
+  },
+  "menuGroups": {
+    "PowerMenu": {
+      "text2": "電源設定",
+      "desc": "電源設定"
+    },
+    "SolderingMenu": {
+      "text2": "焊接設定",
+      "desc": "焊接設定"
+    },
+    "PowerSavingMenu": {
+      "text2": "待機設定",
+      "desc": "自動待機省電設定"
+    },
+    "UIMenu": {
+      "text2": "使用者介面",
+      "desc": "使用者介面設定"
+    },
+    "AdvancedMenu": {
+      "text2": "進階設定",
+      "desc": "進階設定"
+    }
+  },
+  "menuOptions": {
+    "DCInCutoff": {
+      "text2": "電源",
+      "desc": "輸入電源；設定自動停機電壓 <DC 10V> <S 鋰電池，以每顆3.3V計算；此設定會停用功率限制>"
+    },
+    "SleepTemperature": {
+      "text2": "待機溫度",
+      "desc": "於待機模式時的鉻鐵頭溫度"
+    },
+    "SleepTimeout": {
+      "text2": "待機延時",
+      "desc": "自動進入待機模式前的閒置等候時間 <S=秒 | M=分鐘>"
+    },
+    "ShutdownTimeout": {
+      "text2": "自動關機",
+      "desc": "自動關機前的閒置等候時間 <M=分鐘>"
+    },
+    "MotionSensitivity": {
+      "text2": "動作敏感度",
+      "desc": "0=停用 | 1=最低敏感度 | ... | 9=最高敏感度"
+    },
+    "TemperatureUnit": {
+      "text2": "溫標",
+      "desc": "C=攝氏 | F=華氏"
+    },
+    "AdvancedIdle": {
+      "text2": "詳細閒置畫面",
+      "desc": "於閒置畫面以英文小字型顯示詳細資料"
+    },
+    "DisplayRotation": {
+      "text2": "畫面方向",
+      "desc": "右=使用右手 | 左=使用左手 | 自=自動"
+    },
+    "BoostTemperature": {
+      "text2": "增熱溫度",
+      "desc": "於增熱模式時使用的溫度"
+    },
+    "AutoStart": {
+      "text2": "自動啟用",
+      "desc": "開機時自動啟用 <無=停用 | 焊=焊接模式 | 待=待機模式 | 室=室溫待機>"
+    },
+    "CooldownBlink": {
+      "text2": "降溫時閃爍",
+      "desc": "停止加熱之後，當鉻鐵頭仍處於高溫時閃爍畫面"
+    },
+    "TemperatureCalibration": {
+      "text2": "溫度校正？",
+      "desc": "開始校正鉻鐵頭溫度位移"
+    },
+    "SettingsReset": {
+      "text2": "全部重設？",
+      "desc": "將所有設定重設到預設值"
+    },
+    "VoltageCalibration": {
+      "text2": "輸入電壓校正？",
+      "desc": "開始校正VIN輸入電壓 <長按以退出>"
+    },
+    "AdvancedSoldering": {
+      "text2": "詳細焊接畫面",
+      "desc": "於焊接模式畫面以英文小字型顯示詳細資料"
+    },
+    "ScrollingSpeed": {
+      "text2": "捲動速度",
+      "desc": "解說文字的捲動速度"
+    },
+    "QCMaxVoltage": {
+      "text2": "QC電壓",
+      "desc": "使用QC電源時請求的最高目標電壓"
+    },
+    "PDNegTimeout": {
+      "text2": "PD逾時",
+      "desc": "設定USB PD協定交涉的逾時時限；為兼容某些QC電源而設 <x100ms（亳秒）>"
+    },
+    "PowerLimit": {
+      "text2": "功率限制",
+      "desc": "限制鉻鐵可用的最大功率 <W=watt（瓦特）>"
+    },
+    "ReverseButtonTempChange": {
+      "text2": "調換加減鍵",
+      "desc": "調校溫度時調換加減鍵的方向"
+    },
+    "TempChangeShortStep": {
+      "text2": "溫度調整 短",
+      "desc": "調校溫度時短按一下的溫度變幅"
+    },
+    "TempChangeLongStep": {
+      "text2": "溫度調整 長",
+      "desc": "調校溫度時長按按鍵的溫度變幅"
+    },
+    "PowerPulsePower": {
+      "text2": "電源脈衝",
+      "desc": "為保持電源喚醒而通電所用的功率 <watt（瓦特）>"
+    },
+    "HallEffSensitivity": {
+      "text2": "磁場敏感度",
+      "desc": "磁場感應器用作啟動待機模式的敏感度 <關=停用 | 低=最低敏感度 | 中=中等敏感度 | 高=最高敏感度>"
+    },
+    "LockingMode": {
+      "text2": "按鍵鎖定",
+      "desc": "於焊接模式時，同時長按兩個按鍵啟用按鍵鎖定 <無=停用 | 增=只容許增熱模式 | 全=鎖定全部>"
+    },
+    "MinVolCell": {
+      "text2": "最低電壓",
+      "desc": "每顆電池的最低可用電壓 <伏特> <3S: 3.0V - 3.7V, 4/5/6S: 2.4V - 3.7V>"
+    },
+    "AnimLoop": {
+      "text2": "動畫循環",
+      "desc": "循環顯示功能表圖示動畫"
+    },
+    "AnimSpeed": {
+      "text2": "動畫速度",
+      "desc": "功能表圖示動畫的速度 <關=不顯示動畫 | 慢=慢速 | 中=中速 | 快=快速>"
+    },
+    "PowerPulseWait": {
+      "text2": "電源脈衝間隔",
+      "desc": "為保持電源喚醒，每次通電之間的間隔時間 <x2.5s（秒）>"
+    },
+    "PowerPulseDuration": {
+      "text2": "電源脈衝時長",
+      "desc": "為保持電源喚醒，每次通電脈衝的時間長度 <x250ms（亳秒）>"
+    },
+    "LanguageSwitch": {
+      "text2": "語言：正體中文",
+      "desc": ""
+    },
+    "Brightness": {
+      "text2": "螢幕亮度",
+      "desc": "設定OLED螢幕的亮度"
+    },
+    "ColourInversion": {
+      "text2": "螢幕反轉色",
+      "desc": "反轉OLED螢幕的黑白色彩"
+    }
+  }
+}

Translations/translation_bg.json

@@ -1,279 +0,0 @@
-{
-	"languageCode": "BG",
-	"languageLocalName": "Български",
-	"cyrillicGlyphs": true,
-	"messages": {
-		"SettingsCalibrationDone": "Калибрацията завършена!",
-		"SettingsCalibrationWarning": "Уверете се, че върха на поялника е със стайна температура преди да продължите!",
-		"SettingsResetWarning": "Сигурни ли сте, че искате да върнете фабричните настройки?",
-		"UVLOWarningString": "Ниско DC Напрежение",
-		"UndervoltageString": "Ниско Напрежение",
-		"InputVoltageString": "Входно V: ",
-		"WarningTipTempString": "Темп.: ",
-		"BadTipString": "ЛОШ ВРЪХ",
-		"SleepingSimpleString": "Сън",
-		"SleepingAdvancedString": "Хър Хър Хър...",
-		"WarningSimpleString": "ОХ!",
-		"WarningAdvancedString": "ВНИМАНИЕ! ТОПЛО!",
-		"SleepingTipAdvancedString": "Връх:",
-		"IdleTipString": "Връх:",
-		"IdleSetString": " Настройка:",
-		"TipDisconnectedString": "ПРЕКЪСНАТ ВРЪХ",
-		"SolderingAdvancedPowerPrompt": "Захранване: ",
-		"OffString": "Изкл.",
-		"ResetOKMessage": "Нулиране завършено",
-		"YourGainMessage": "Усилване:",
-		"SettingsResetMessage": "Настройките бяха\nнулирани!",
-		"NoAccelerometerMessage": "No accelerometer\ndetected!",
-		"NoPowerDeliveryMessage": "No USB-PD IC\ndetected!",
-		"LockingKeysString": " LOCKED",
-		"UnlockingKeysString": "UNLOCKED",
-		"WarningKeysLockedString": "!LOCKED!"
-	},
-	"characters": {
-		"SettingRightChar": "R",
-		"SettingLeftChar": "L",
-		"SettingAutoChar": "A",
-		"SettingFastChar": "F",
-		"SettingSlowChar": "S",
-		"SettingStartSolderingChar": "T",
-		"SettingStartSleepChar": "S",
-		"SettingStartSleepOffChar": "O",
-		"SettingStartNoneChar": "F",
-		"SettingSensitivityOff": "O",
-		"SettingSensitivityLow": "L",
-		"SettingSensitivityMedium": "M",
-		"SettingSensitivityHigh": "H",
-		"SettingLockDisableChar": "D",
-		"SettingLockBoostChar": "B",
-		"SettingLockFullChar": "F"
-	},
-	"menuGroups": {
-		"SolderingMenu": {
-			"text2": [
-				"Поялник",
-				"Настройки"
-			],
-			"desc": "Настройки на поялника"
-		},
-		"PowerSavingMenu": {
-			"text2": [
-				"Режими",
-				"Настройки"
-			],
-			"desc": "Настройки енергоспестяване"
-		},
-		"UIMenu": {
-			"text2": [
-				"Интерфейс",
-				"Настройки"
-			],
-			"desc": "Настройки на интерфейса"
-		},
-		"AdvancedMenu": {
-			"text2": [
-				"Разширени",
-				"Настройки"
-			],
-			"desc": "Допълнителни настройки"
-		}
-	},
-	"menuOptions": {
-		"DCInCutoff": {
-			"text2": [
-				"Източник",
-				"захранване"
-			],
-			"desc": "Източник на захранване. Минимално напрежение. <DC 10V> <S 3.3V за клетка>"
-		},
-		"SleepTemperature": {
-			"text2": [
-				"Темп.",
-				"сън"
-			],
-			"desc": "Температура при режим \"сън\" <C>"
-		},
-		"SleepTimeout": {
-			"text2": [
-				"Време",
-				"сън"
-			],
-			"desc": "Включване в режим \"сън\" след: <Минути/Секунди>"
-		},
-		"ShutdownTimeout": {
-			"text2": [
-				"Време",
-				"изкл."
-			],
-			"desc": "Изключване след <Минути>"
-		},
-		"MotionSensitivity": {
-			"text2": [
-				"Усещане",
-				"за движение"
-			],
-			"desc": "Усещане за движение <0.Изключено 1.Слабо 9.Силно>"
-		},
-		"TemperatureUnit": {
-			"text2": [
-				"Единици за",
-				"температура"
-			],
-			"desc": "Единици за температура <C=Целзии F=Фаренхайт>"
-		},
-		"AdvancedIdle": {
-			"text2": [
-				"Детайлен",
-				"екран в покой"
-			],
-			"desc": "Покажи детайлна информация със ситен шрифт на екрана в режим на покой."
-		},
-		"DisplayRotation": {
-			"text2": [
-				"Ориентация",
-				"на дисплея"
-			],
-			"desc": "Ориентация на дисплея <A. Автоматично L. Лява Ръка R. Дясна Ръка>"
-		},
-		"BoostTemperature": {
-			"text2": [
-				"Турбо",
-				"темп."
-			],
-			"desc": "Температура за \"турбо\" режим"
-		},
-		"AutoStart": {
-			"text2": [
-				"Автоматичен",
-				"работен режим"
-			],
-			"desc": "Режим на поялника при включване на захранването. T=Работен, S=Сън, F=Изключен"
-		},
-		"CooldownBlink": {
-			"text2": [
-				"Мигай при",
-				"топъл поялник"
-			],
-			"desc": "След изключване от работен режим, индикатора за температура да мига докато човката на поялника все още е топла"
-		},
-		"TemperatureCalibration": {
-			"text2": [
-				"Калибриране",
-				"температура?"
-			],
-			"desc": "Калибриране на температурата"
-		},
-		"SettingsReset": {
-			"text2": [
-				"Фабрични",
-				"настройки?"
-			],
-			"desc": "Връщане на фабрични настройки"
-		},
-		"VoltageCalibration": {
-			"text2": [
-				"Калибриране",
-				"напрежение?"
-			],
-			"desc": "Калибриране на входното напрежение. Задръжте бутонa за изход"
-		},
-		"AdvancedSoldering": {
-			"text2": [
-				"Детайлен",
-				"работен екран"
-			],
-			"desc": "Детайлна информация в работен режим при запояване"
-		},
-		"ScrollingSpeed": {
-			"text2": [
-				"Скорост",
-				"на текста"
-			],
-			"desc": "Скорост на движение на този текст"
-		},
-		"TipModel": {
-			"text2": [
-				"Модел",
-				"на връх"
-			],
-			"desc": "Избор на модел на връх"
-		},
-		"SimpleCalibrationMode": {
-			"text2": [
-				"Бърза",
-				"калибрация"
-			],
-			"desc": "Бърза калибрация с използване на гореща вода"
-		},
-		"AdvancedCalibrationMode": {
-			"text2": [
-				"Прецизна",
-				"калибрация"
-			],
-			"desc": "Прецизна калибрация с използване на термо-двойка на върха на поялника"
-		},
-		"QCMaxVoltage": {
-			"text2": [
-				"Мощност на",
-				"захранване"
-			],
-			"desc": "Мощност на избраното захранване"
-		},
-		"PowerLimit": {
-			"text2": [
-				"Лимит на",
-				"мощност"
-			],
-			"desc": "Максимална мощност на поялника <W>"
-		},
-		"ReverseButtonTempChange": {
-			"text2": [
-				"Размяна",
-				"бутони +-?"
-			],
-			"desc": "Обръщане на бутоните \"+\" и \"-\" за промяна на температурата на върха на поялника"
-		},
-		"TempChangeShortStep": {
-			"text2": [
-				"Промяна T",
-				"бързо?"
-			],
-			"desc": "Промяна на температура при бързо натискане на бутон!"
-		},
-		"TempChangeLongStep": {
-			"text2": [
-				"Промяна Т",
-				"задържане?"
-			],
-			"desc": "Промяна на температура при задържане на бутон!"
-		},
-		"PowerPulsePower": {
-			"text2": [
-				"Захранващ",
-				"импулс"
-			],
-			"desc": "Поддържане на интензивност на захранващия импулс"
-		},
-		"TipGain": {
-			"text2": [
-				"Промяна",
-				"сила връх"
-			],
-			"desc": "Усилване на върха на поялника"
-		},
-		"HallEffSensitivity": {
-			"text2": [
-				"Hall Eff",
-				"Sensitivity"
-			],
-			"desc": "Sensitivity of the Hall effect sensor in detecting sleep <O=Off,L=Low,M=Medium,H=High>"
-		},
-		"LockingMode": {
-			"text2": [
-				"Allow buttons",
-				"locking"
-			],
-			"desc": "When soldering, long press on both buttons lock them <D=Disable, B=Boost only, F=Full locking>"
-		}
-	}
-}

Translations/translation_cs.json

@@ -1,279 +0,0 @@
-{
-	"languageCode": "CS",
-	"languageLocalName": "Český",
-	"cyrillicGlyphs": false,
-	"messages": {
-		"SettingsCalibrationDone": "Kalibrace dokončena!",
-		"SettingsCalibrationWarning": "Ujistěte se, že hrot má pokojovou teplotu!",
-		"SettingsResetWarning": "Opravdu chcete resetovat zařízení do továrního nastavení?",
-		"UVLOWarningString": "Nízké DC",
-		"UndervoltageString": "! Nízké napětí !",
-		"InputVoltageString": "Napětí: ",
-		"WarningTipTempString": "Teplota: ",
-		"BadTipString": "ŠP. HROT",
-		"SleepingSimpleString": "Zzz ",
-		"SleepingAdvancedString": "Režim spánku...",
-		"WarningSimpleString": "PÁLÍ",
-		"WarningAdvancedString": "!! HORKÝ HROT !!",
-		"SleepingTipAdvancedString": "Hrot:",
-		"IdleTipString": "Hrot:",
-		"IdleSetString": " Cíl:",
-		"TipDisconnectedString": "HROT NEPŘIPOJEN",
-		"SolderingAdvancedPowerPrompt": "Ohřev: ",
-		"OffString": "Vyp",
-		"ResetOKMessage": "Reset OK",
-		"YourGainMessage": "Zisk:",
-		"SettingsResetMessage": "Tov. nas. obnov.",
-		"NoAccelerometerMessage": "No accelerometer\ndetected!",
-		"NoPowerDeliveryMessage": "No USB-PD IC\ndetected!",
-		"LockingKeysString": " LOCKED",
-		"UnlockingKeysString": "UNLOCKED",
-		"WarningKeysLockedString": "!LOCKED!"
-	},
-	"characters": {
-		"SettingRightChar": "P",
-		"SettingLeftChar": "L",
-		"SettingAutoChar": "A",
-		"SettingFastChar": "R",
-		"SettingSlowChar": "P",
-		"SettingStartSolderingChar": "T",
-		"SettingStartSleepChar": "S",
-		"SettingStartSleepOffChar": "O",
-		"SettingStartNoneChar": "F",
-		"SettingSensitivityOff": "O",
-		"SettingSensitivityLow": "L",
-		"SettingSensitivityMedium": "M",
-		"SettingSensitivityHigh": "H",
-		"SettingLockDisableChar": "D",
-		"SettingLockBoostChar": "B",
-		"SettingLockFullChar": "F"
-	},
-	"menuGroups": {
-		"SolderingMenu": {
-			"text2": [
-				"Pájecí",
-				"nastavení"
-			],
-			"desc": "Nastavení pájení (boost, auto start...)."
-		},
-		"PowerSavingMenu": {
-			"text2": [
-				"Režim",
-				"spánku"
-			],
-			"desc": "Nastavení režimu spánku, automatického vypnutí..."
-		},
-		"UIMenu": {
-			"text2": [
-				"Uživatelské",
-				"rozhraní"
-			],
-			"desc": "Nastavení uživatelského rozhraní."
-		},
-		"AdvancedMenu": {
-			"text2": [
-				"Pokročilé",
-				"volby"
-			],
-			"desc": "Pokročilé volby (detailní obrazovky, kalibrace, tovární nastavení...)."
-		}
-	},
-	"menuOptions": {
-		"DCInCutoff": {
-			"text2": [
-				"Zdroj",
-				"napájení"
-			],
-			"desc": "Při nižším napětí ukončí pájení <DC=10V, ?S=?x3.3V pro LiPo, LiIon...>."
-		},
-		"SleepTemperature": {
-			"text2": [
-				"Teplota v",
-				"r. spánku"
-			],
-			"desc": "Teplota v režimu spánku."
-		},
-		"SleepTimeout": {
-			"text2": [
-				"Čas do",
-				"r. spánku"
-			],
-			"desc": "Čas do režimu spánku <Minut/Sekund>."
-		},
-		"ShutdownTimeout": {
-			"text2": [
-				"Čas do",
-				"vypnutí"
-			],
-			"desc": "Čas do automatického vypnutí <Minut>."
-		},
-		"MotionSensitivity": {
-			"text2": [
-				"Citlivost",
-				"det. pohybu"
-			],
-			"desc": "Citlivost detekce pohybu <0=Vyp, 1=Min, ... 9=Max>."
-		},
-		"TemperatureUnit": {
-			"text2": [
-				"Jednotky",
-				"teploty"
-			],
-			"desc": "Jednotky měření teploty <C=Celsius, F=Fahrenheit>."
-		},
-		"AdvancedIdle": {
-			"text2": [
-				"Podrobnosti",
-				"na vých. obr."
-			],
-			"desc": "Zobrazit podrobnosti na výchozí obrazovce?"
-		},
-		"DisplayRotation": {
-			"text2": [
-				"Orientace",
-				"obrazovky"
-			],
-			"desc": "Orientace obrazovky <A=Auto, L=Levák, P=Pravák>."
-		},
-		"BoostTemperature": {
-			"text2": [
-				"Teplota v",
-				"r. boost"
-			],
-			"desc": "Teplota v režimu boost."
-		},
-		"AutoStart": {
-			"text2": [
-				"Automatický",
-				"start"
-			],
-			"desc": "Při startu ihned nahřát hrot?"
-		},
-		"CooldownBlink": {
-			"text2": [
-				"Blikáni při",
-				"chladnutí"
-			],
-			"desc": "Blikání teploty při chladnutí, dokud je hrot horký?"
-		},
-		"TemperatureCalibration": {
-			"text2": [
-				"Kalibrovat",
-				"teplotu?"
-			],
-			"desc": "Kalibrace měření teploty."
-		},
-		"SettingsReset": {
-			"text2": [
-				"Tovární",
-				"nastavení?"
-			],
-			"desc": "Obnovení továrního nastavení."
-		},
-		"VoltageCalibration": {
-			"text2": [
-				"Kalibrovat",
-				"vstupní napětí?"
-			],
-			"desc": "Kalibrace vstupního napětí. Tlačítky uprav, podržením potvrď."
-		},
-		"AdvancedSoldering": {
-			"text2": [
-				"Podrobnosti",
-				"při pájení"
-			],
-			"desc": "Zobrazit podrobnosti při pájení?"
-		},
-		"ScrollingSpeed": {
-			"text2": [
-				"Rychlost",
-				"popisků"
-			],
-			"desc": "Rychlost posuvu popisků podobných tomuto <P=Pomalu, R=Rychle>"
-		},
-		"TipModel": {
-			"text2": [
-				"Model",
-				"hrotu"
-			],
-			"desc": "Výběr modelu hrotu."
-		},
-		"SimpleCalibrationMode": {
-			"text2": [
-				"Jednoduchá",
-				"kalibrace"
-			],
-			"desc": "Jednoduchá kalibrace pomocí horké vody."
-		},
-		"AdvancedCalibrationMode": {
-			"text2": [
-				"Pokročilá",
-				"kalibrace"
-			],
-			"desc": "Pokročilá kalibrace pomocí termočlánku na hrotu."
-		},
-		"QCMaxVoltage": {
-			"text2": [
-				"Výkon",
-				"ve wattech"
-			],
-			"desc": "Výkon použítého napájecího adaptéru ve wattech."
-		},
-		"PowerLimit": {
-			"text2": [
-				"Omezení",
-				"Výkonu"
-			],
-			"desc": "Maximální příkon <Watty>"
-		},
-		"ReverseButtonTempChange": {
-			"text2": [
-				"Prohodit",
-				"tl. +-?"
-			],
-			"desc": "Prohodí tlačítka plus a minus pro změnu teploty hrotu."
-		},
-		"TempChangeShortStep": {
-			"text2": [
-				"Krok teploty",
-				"krátký?"
-			],
-			"desc": "Velikost skoku při změně teploty krátkým stiskem tlačítka!"
-		},
-		"TempChangeLongStep": {
-			"text2": [
-				"Krok teploty",
-				"dlouhý?"
-			],
-			"desc": "Velikost skoku při změně teploty dlouhým stiskem tlačítka!"
-		},
-		"PowerPulsePower": {
-			"text2": [
-				"Intenzita",
-				"Výkon. pulsu"
-			],
-			"desc": "Puls pro udržení zařízení v chodu (kvůli power bankám)."
-		},
-		"TipGain": {
-			"text2": [
-				"Změnit",
-				"zisk hr."
-			],
-			"desc": "Zisk hrotu (měření)"
-		},
-		"HallEffSensitivity": {
-			"text2": [
-				"Hall Eff",
-				"Sensitivity"
-			],
-			"desc": "Sensitivity of the Hall effect sensor in detecting sleep <O=Off,L=Low,M=Medium,H=High>"
-		},
-		"LockingMode": {
-			"text2": [
-				"Allow buttons",
-				"locking"
-			],
-			"desc": "When soldering, long press on both buttons lock them <D=Disable, B=Boost only, F=Full locking>"
-		}
-	}
-}

Translations/translation_da.json

@@ -1,279 +0,0 @@
-{
-	"languageCode": "DA",
-	"languageLocalName": "Dansk",
-	"cyrillicGlyphs": false,
-	"messages": {
-		"SettingsCalibrationDone": "Calibration done!",
-		"SettingsCalibrationWarning": "Sørg for at loddespidsen er ved stuetemperatur, inden du fortsætter!",
-		"SettingsResetWarning": "Are you sure to reset settings to default values?",
-		"UVLOWarningString": "Lav Volt",
-		"UndervoltageString": "Undervoltage",
-		"InputVoltageString": "Input V: ",
-		"WarningTipTempString": "Tip Temp: ",
-		"BadTipString": "BAD TIP",
-		"SleepingSimpleString": "Zzzz",
-		"SleepingAdvancedString": "Dvale...",
-		"WarningSimpleString": "Varm",
-		"WarningAdvancedString": "VARM LODDESPIDS!",
-		"SleepingTipAdvancedString": "Tip:",
-		"IdleTipString": "Tip:",
-		"IdleSetString": " Set:",
-		"TipDisconnectedString": "TIP DISCONNECTED",
-		"SolderingAdvancedPowerPrompt": "Power: ",
-		"OffString": "Off",
-		"ResetOKMessage": "Reset OK",
-		"YourGainMessage": "Your gain:",
-		"SettingsResetMessage": "Settings were\nreset!",
-		"NoAccelerometerMessage": "No accelerometer\ndetected!",
-		"NoPowerDeliveryMessage": "No USB-PD IC\ndetected!",
-		"LockingKeysString": " LOCKED",
-		"UnlockingKeysString": "UNLOCKED",
-		"WarningKeysLockedString": "!LOCKED!"
-	},
-	"characters": {
-		"SettingRightChar": "H",
-		"SettingLeftChar": "V",
-		"SettingAutoChar": "A",
-		"SettingFastChar": "F",
-		"SettingSlowChar": "S",
-		"SettingStartSolderingChar": "L",
-		"SettingStartSleepChar": "D",
-		"SettingStartSleepOffChar": "O",
-		"SettingStartNoneChar": "S",
-		"SettingSensitivityOff": "O",
-		"SettingSensitivityLow": "L",
-		"SettingSensitivityMedium": "M",
-		"SettingSensitivityHigh": "H",
-		"SettingLockDisableChar": "D",
-		"SettingLockBoostChar": "B",
-		"SettingLockFullChar": "F"
-	},
-	"menuGroups": {
-		"SolderingMenu": {
-			"text2": [
-				"Soldering",
-				"Settings"
-			],
-			"desc": "Soldering settings"
-		},
-		"PowerSavingMenu": {
-			"text2": [
-				"Sleep",
-				"Modes"
-			],
-			"desc": "Power Saving Settings"
-		},
-		"UIMenu": {
-			"text2": [
-				"User",
-				"Interface"
-			],
-			"desc": "User Interface settings"
-		},
-		"AdvancedMenu": {
-			"text2": [
-				"Advanced",
-				"Options"
-			],
-			"desc": "Advanced options"
-		}
-	},
-	"menuOptions": {
-		"DCInCutoff": {
-			"text2": [
-				"Power",
-				"source"
-			],
-			"desc": "Strømforsyning. Indstil Cutoff Spændingen. <DC 10V <S 3.3V per cell"
-		},
-		"SleepTemperature": {
-			"text2": [
-				"Sleep",
-				"temp"
-			],
-			"desc": "Dvale Temperatur <C>"
-		},
-		"SleepTimeout": {
-			"text2": [
-				"Sleep",
-				"timeout"
-			],
-			"desc": "Dvale Timeout <Minutter/Sekunder"
-		},
-		"ShutdownTimeout": {
-			"text2": [
-				"Shutdown",
-				"timeout"
-			],
-			"desc": "sluknings Timeout <Minutter"
-		},
-		"MotionSensitivity": {
-			"text2": [
-				"Motion",
-				"sensitivity"
-			],
-			"desc": "Bevægelsesfølsomhed <0.Slukket 1.Mindst følsom 9.Mest følsom"
-		},
-		"TemperatureUnit": {
-			"text2": [
-				"Temperature",
-				"unit"
-			],
-			"desc": "Temperatur Enhed <C=Celsius F=Fahrenheit"
-		},
-		"AdvancedIdle": {
-			"text2": [
-				"Detailed",
-				"idle screen"
-			],
-			"desc": "Vis detialieret information med en mindre skriftstørrelse på standby skærmen."
-		},
-		"DisplayRotation": {
-			"text2": [
-				"Display",
-				"orientation"
-			],
-			"desc": "Skærm Orientering <A. Automatisk V. Venstre Håndet H. Højre Håndet"
-		},
-		"BoostTemperature": {
-			"text2": [
-				"Boost",
-				"temp"
-			],
-			"desc": "Temperatur i \"boost\" mode"
-		},
-		"AutoStart": {
-			"text2": [
-				"Auto",
-				"start"
-			],
-			"desc": "Start automatisk med lodning når strøm sættes til. L=Lodning, D= Dvale tilstand,S=Slukket"
-		},
-		"CooldownBlink": {
-			"text2": [
-				"Cooldown",
-				"blink"
-			],
-			"desc": "Blink temperaturen på skærmen, mens spidsen stadig er varm."
-		},
-		"TemperatureCalibration": {
-			"text2": [
-				"Calibrate",
-				"temperature?"
-			],
-			"desc": "kalibrere spids temperatur."
-		},
-		"SettingsReset": {
-			"text2": [
-				"Factory",
-				"Reset?"
-			],
-			"desc": "Gendan alle indstillinger"
-		},
-		"VoltageCalibration": {
-			"text2": [
-				"Calibrate",
-				"input voltage?"
-			],
-			"desc": "VIN kalibrering. Knapperne justere, Lang tryk for at gå ud"
-		},
-		"AdvancedSoldering": {
-			"text2": [
-				"Detailed",
-				"solder screen"
-			],
-			"desc": "Vis detialieret information mens der loddes"
-		},
-		"ScrollingSpeed": {
-			"text2": [
-				"Scrolling",
-				"speed"
-			],
-			"desc": "Speed this text scrolls past at"
-		},
-		"TipModel": {
-			"text2": [
-				"Tip",
-				"Model"
-			],
-			"desc": "Tip Model selection"
-		},
-		"SimpleCalibrationMode": {
-			"text2": [
-				"Simple",
-				"Calibration"
-			],
-			"desc": "Simple Calibration using Hot water"
-		},
-		"AdvancedCalibrationMode": {
-			"text2": [
-				"Advanced",
-				"Calibration"
-			],
-			"desc": "Advanced calibration using thermocouple on the tip"
-		},
-		"QCMaxVoltage": {
-			"text2": [
-				"Power",
-				"Wattage"
-			],
-			"desc": "Power Wattage of the power adapter used"
-		},
-		"PowerLimit": {
-			"text2": [
-				"Power",
-				"Limit"
-			],
-			"desc": "Maximum power the iron can use <Watts>"
-		},
-		"ReverseButtonTempChange": {
-			"text2": [
-				"Key +-",
-				"reverse?"
-			],
-			"desc": "Reverse the tip temperature change buttons plus minus assignment."
-		},
-		"TempChangeShortStep": {
-			"text2": [
-				"Temp change",
-				"short?"
-			],
-			"desc": "Temperature change steps on short button press!"
-		},
-		"TempChangeLongStep": {
-			"text2": [
-				"Temp change",
-				"long?"
-			],
-			"desc": "Temperature change steps on long button press!"
-		},
-		"PowerPulsePower": {
-			"text2": [
-				"Power",
-				"Pulse W"
-			],
-			"desc": "Keep awake pulse power intensity"
-		},
-		"TipGain": {
-			"text2": [
-				"Modify",
-				"tip gain"
-			],
-			"desc": "Tip gain"
-		},
-		"HallEffSensitivity": {
-			"text2": [
-				"Hall Eff",
-				"Sensitivity"
-			],
-			"desc": "Sensitivity of the Hall effect sensor in detecting sleep <O=Off,L=Low,M=Medium,H=High>"
-		},
-		"LockingMode": {
-			"text2": [
-				"Allow buttons",
-				"locking"
-			],
-			"desc": "When soldering, long press on both buttons lock them <D=Disable, B=Boost only, F=Full locking>"
-		}
-	}
-}

Translations/translation_de.json

@@ -1,280 +0,0 @@
-{
-	"languageCode": "DE",
-	"languageLocalName": "Deutsch",
-	"cyrillicGlyphs": false,
-	"tempUnitFahrenheit": false,
-	"messages": {
-		"SettingsCalibrationDone": "Kalibrierung abgeschlossen!",
-		"SettingsCalibrationWarning": "Vor dem Fortfahren muss die Lötspitze vollständig abgekühlt sein!",
-		"SettingsResetWarning": "Sicher, dass alle Werte zurückgesetzt werden sollen?",
-		"UVLOWarningString": "V niedr.",
-		"UndervoltageString": "Unterspannung",
-		"InputVoltageString": "V Eingang: ",
-		"WarningTipTempString": "Temperatur: ",
-		"BadTipString": "Spitze Defekt",
-		"SleepingSimpleString": "Zzz ",
-		"SleepingAdvancedString": "Ruhemodus...",
-		"WarningSimpleString": "HEIß!",
-		"WarningAdvancedString": "! Achtung Heiß !",
-		"SleepingTipAdvancedString": "Temp:",
-		"IdleTipString": "Ist:",
-		"IdleSetString": " Soll:",
-		"TipDisconnectedString": "Spitze fehlt",
-		"SolderingAdvancedPowerPrompt": "Leistung: ",
-		"OffString": "Aus",
-		"NoAccelerometerMessage": "Kein Bewegungssensor\nerkannt!",
-		"NoPowerDeliveryMessage": "Kein USB-PD IC\nerkannt!",
-		"ResetOKMessage": "Reset OK",
-		"YourGainMessage": "Dein Faktor:",
-		"SettingsResetMessage": "Einstellungen\nzurückgesetzt!",
-		"LockingKeysString": "GESPERRT",
-		"UnlockingKeysString": "ENTSPERRT",
-		"WarningKeysLockedString": "!GESPERRT!"
-	},
-	"characters": {
-		"SettingRightChar": "R",
-		"SettingLeftChar": "L",
-		"SettingAutoChar": "A",
-		"SettingFastChar": "S",
-		"SettingSlowChar": "L",
-		"SettingStartSolderingChar": "L",
-		"SettingStartSleepChar": "R",
-		"SettingStartSleepOffChar": "K",
-		"SettingStartNoneChar": "A",
-		"SettingSensitivityOff": "A",
-		"SettingSensitivityLow": "N",
-		"SettingSensitivityMedium": "M",
-		"SettingSensitivityHigh": "H",
-		"SettingLockDisableChar": "D",
-		"SettingLockBoostChar": "B",
-		"SettingLockFullChar": "V"
-	},
-	"menuGroups": {
-		"SolderingMenu": {
-			"text2": [
-				"Löt-",
-				"einstellungen"
-			],
-			"desc": "Löteinstellungen"
-		},
-		"PowerSavingMenu": {
-			"text2": [
-				"Ruhe-",
-				"modus"
-			],
-			"desc": "Energiespareinstellungen"
-		},
-		"UIMenu": {
-			"text2": [
-				"Anzeige-",
-				"einstellungen"
-			],
-			"desc": "Menüeinstellungen"
-		},
-		"AdvancedMenu": {
-			"text2": [
-				"Erweiterte",
-				"Optionen"
-			],
-			"desc": "Erweiterte Einstellungen"
-		}
-	},
-	"menuOptions": {
-		"DCInCutoff": {
-			"text2": [
-				"Spannungs-",
-				"quelle"
-			],
-			"desc": "Spannungsquelle (Abschaltspannung) <DC=10V, nS=n*3.3V für n LiIon-Zellen>"
-		},
-		"SleepTemperature": {
-			"text2": [
-				"Ruhe-",
-				"temperatur"
-			],
-			"desc": "Ruhetemperatur der Spitze"
-		},
-		"SleepTimeout": {
-			"text2": [
-				"Ruhever-",
-				"zögerung"
-			],
-			"desc": "System wechselt in Ruhemodus, wenn innerhalb dieser Dauer nicht bewegt <S=Sekunden | M=Minuten>"
-		},
-		"ShutdownTimeout": {
-			"text2": [
-				"Abschalt-",
-				"zeit"
-			],
-			"desc": "System schaltet ab, wenn innerhalb dieser Dauer nicht bewegt <M=Minuten>"
-		},
-		"MotionSensitivity": {
-			"text2": [
-				"Bewegungs-",
-				"empfindlichk."
-			],
-			"desc": "0=aus | 1=minimal | ... | 9=maximal"
-		},
-		"TemperatureUnit": {
-			"text2": [
-				"Temperatur-",
-				"einheit"
-			],
-			"desc": "C=Celsius | F=Fahrenheit"
-		},
-		"AdvancedIdle": {
-			"text2": [
-				"Detaillierte",
-				"Ruheansicht"
-			],
-			"desc": "Detaillierte Anzeige im Ruhemodus"
-		},
-		"DisplayRotation": {
-			"text2": [
-				"Anzeige-",
-				"ausrichtung"
-			],
-			"desc": "A=automatisch | L=linkshändig | R=rechtshändig"
-		},
-		"BoostTemperature": {
-			"text2": [
-				"Boost-",
-				"temperatur"
-			],
-			"desc": "Temperatur der Lötspitze im Boostmodus"
-		},
-		"AutoStart": {
-			"text2": [
-				"Start im",
-				"Lötmodus"
-			],
-			"desc": "Bestimmt das Heizverhalten beim Einschalten der Spannungsversorgung <A=aus | L=Lötmodus | R=Ruhemodus | K=Ruhemodus mit klater Spitze>"
-		},
-		"CooldownBlink": {
-			"text2": [
-				"Abkühl-",
-				"blinken"
-			],
-			"desc": "Temperaturanzeige blinkt beim Abkühlen, solange Spitze heiß ist"
-		},
-		"TemperatureCalibration": {
-			"text2": [
-				"Temperatur",
-				"kalibrieren?"
-			],
-			"desc": "Kalibrierung der Lötspitzentemperatur"
-		},
-		"SettingsReset": {
-			"text2": [
-				"Einstellungen",
-				"zurücksetzen?"
-			],
-			"desc": "Werte werden auf Werkseinstellungen zurückgesetzt!"
-		},
-		"VoltageCalibration": {
-			"text2": [
-				"Eingangsspannung",
-				"kalibrieren?"
-			],
-			"desc": "Kalibrierung der Eingangsspannung. Kurzer Tastendruck zum Einstellen, langer Tastendruck zum Verlassen."
-		},
-		"AdvancedSoldering": {
-			"text2": [
-				"Detaillierte",
-				"Lötansicht"
-			],
-			"desc": "Detaillierte Anzeige im Lötmodus"
-		},
-		"ScrollingSpeed": {
-			"text2": [
-				"Scroll-",
-				"geschw."
-			],
-			"desc": "Scrollgeschwindigkeit der Erläuterungen <L=langsam | S=schnell>"
-		},
-		"TipModel": {
-			"text2": [
-				"Löt-",
-				"spitze"
-			],
-			"desc": "Auswahl der Lötspitze"
-		},
-		"SimpleCalibrationMode": {
-			"text2": [
-				"Einfache",
-				"Kalibrierung"
-			],
-			"desc": "Einfache Kalibrierung mittels heißen Wassers"
-		},
-		"AdvancedCalibrationMode": {
-			"text2": [
-				"Erweiterte",
-				"Kalibrierung"
-			],
-			"desc": "Erweiterte Kalibrierung mittels eines Thermoelements an der Lötspitze"
-		},
-		"QCMaxVoltage": {
-			"text2": [
-				"Spannungs-",
-				"grenze"
-			],
-			"desc": "Maximal zulässige Spannung der verwendeten Spannungsversorgung <V=Volt>"
-		},
-		"PowerLimit": {
-			"text2": [
-				"Leistungs-",
-				"grenze"
-			],
-			"desc": "Maximale zulässige Leistungsaufnahme des Lötkolbens <W=Watt>"
-		},
-		"ReverseButtonTempChange": {
-			"text2": [
-				"+- Tasten",
-				"umkehren?"
-			],
-			"desc": "Tastenbelegung zur Temperaturänderung umkehren"
-		},
-		"TempChangeShortStep": {
-			"text2": [
-				"Temp-Schritt",
-				"Druck kurz"
-			],
-			"desc": "Schrittweite für Temperaturwechsel bei kurzem Tastendruck"
-		},
-		"TempChangeLongStep": {
-			"text2": [
-				"Temp-Schritt",
-				"Druck lang"
-			],
-			"desc": "Schrittweite für Temperaturwechsel bei langem Tastendruck"
-		},
-		"PowerPulsePower": {
-			"text2": [
-				"Leistungs-",
-				"impuls"
-			],
-			"desc": "Powerbank wird mittels eines Impulses wach gehalten <Watt>"
-		},
-		"TipGain": {
-			"text2": [
-				"Ändere",
-				"Spitzen Faktor"
-			],
-			"desc": "Spitzen Faktor"
-		},
-		"HallEffSensitivity": {
-			"text2": [
-				"Hall Sensor",
-				"Empfindlichkeit"
-			],
-			"desc": "Empfindlichkeit des Hall Effekt Sensors beim Erkennen des Ruhemodus <A=aus | N=niedrig | M=mittel | H=hoch>"
-		},
-		"LockingMode": {
-			"text2": [
-				"Knopf-",
-				"sperre"
-			],
-			"desc": "Langes drücken beider Knöpfe im Lötmodus, sperrt diese <D=deaktiviert | B=nur Boost | V=vollständig gesperrt>"
-		}
-	}
-}

Translations/translation_en.json

@@ -1,280 +0,0 @@
-{
-	"languageCode": "EN",
-	"languageLocalName": "English",
-	"cyrillicGlyphs": false,
-	"tempUnitFahrenheit": true,
-	"messages": {
-		"SettingsCalibrationDone": "Calibration done!",
-		"SettingsCalibrationWarning": "Please ensure the tip is at room temperature, before continuing!",
-		"SettingsResetWarning": "Sure you want to restore default settings?",
-		"UVLOWarningString": "DC LOW",
-		"UndervoltageString": "Undervoltage",
-		"InputVoltageString": "Input V: ",
-		"WarningTipTempString": "Tip temp: ",
-		"BadTipString": "BAD TIP",
-		"SleepingSimpleString": "Zzzz",
-		"SleepingAdvancedString": "Sleeping...",
-		"WarningSimpleString": "HOT!",
-		"WarningAdvancedString": "!!! HOT TIP !!!",
-		"SleepingTipAdvancedString": "Tip:",
-		"IdleTipString": "Tip:",
-		"IdleSetString": " Set:",
-		"TipDisconnectedString": "NO TIP",
-		"SolderingAdvancedPowerPrompt": "Power: ",
-		"OffString": "Off",
-		"ResetOKMessage": "Reset OK",
-		"YourGainMessage": "Your gain:",
-		"SettingsResetMessage": "Settings were\nreset!",
-		"NoAccelerometerMessage": "No accelerometer\ndetected!",
-		"NoPowerDeliveryMessage": "No USB-PD IC\ndetected!",
-		"LockingKeysString": "LOCKED",
-		"UnlockingKeysString": "UNLOCKED",
-		"WarningKeysLockedString": "!LOCKED!"
-	},
-	"characters": {
-		"SettingRightChar": "R",
-		"SettingLeftChar": "L",
-		"SettingAutoChar": "A",
-		"SettingFastChar": "F",
-		"SettingSlowChar": "S",
-		"SettingStartSolderingChar": "S",
-		"SettingStartSleepChar": "Z",
-		"SettingStartSleepOffChar": "R",
-		"SettingStartNoneChar": "O",
-		"SettingSensitivityOff": "O",
-		"SettingSensitivityLow": "L",
-		"SettingSensitivityMedium": "M",
-		"SettingSensitivityHigh": "H",
-		"SettingLockDisableChar": "D",
-		"SettingLockBoostChar": "B",
-		"SettingLockFullChar": "F"
-	},
-	"menuGroups": {
-		"SolderingMenu": {
-			"text2": [
-				"Soldering",
-				"settings"
-			],
-			"desc": "Soldering settings"
-		},
-		"PowerSavingMenu": {
-			"text2": [
-				"Sleep",
-				"mode"
-			],
-			"desc": "Power saving settings"
-		},
-		"UIMenu": {
-			"text2": [
-				"User",
-				"interface"
-			],
-			"desc": "User interface settings"
-		},
-		"AdvancedMenu": {
-			"text2": [
-				"Advanced",
-				"options"
-			],
-			"desc": "Advanced options"
-		}
-	},
-	"menuOptions": {
-		"DCInCutoff": {
-			"text2": [
-				"Power",
-				"source"
-			],
-			"desc": "Power source. Sets cutoff voltage. <DC 10V> <S 3.3V per cell, disable power limit>"
-		},
-		"SleepTemperature": {
-			"text2": [
-				"Sleep",
-				"temp"
-			],
-			"desc": "Tip temperature while in \"sleep mode\""
-		},
-		"SleepTimeout": {
-			"text2": [
-				"Sleep",
-				"timeout"
-			],
-			"desc": "Interval before \"sleep mode\" kicks in <S=seconds | M=minutes>"
-		},
-		"ShutdownTimeout": {
-			"text2": [
-				"Shutdown",
-				"timeout"
-			],
-			"desc": "Interval before the iron shuts down <M=minutes>"
-		},
-		"MotionSensitivity": {
-			"text2": [
-				"Motion",
-				"sensitivity"
-			],
-			"desc": "0=off | 1=least sensitive | ... | 9=most sensitive"
-		},
-		"TemperatureUnit": {
-			"text2": [
-				"Temperature",
-				"unit"
-			],
-			"desc": "C=Celsius | F=Fahrenheit"
-		},
-		"AdvancedIdle": {
-			"text2": [
-				"Detailed",
-				"idle screen"
-			],
-			"desc": "Display detailed information in a smaller font on the idle screen"
-		},
-		"DisplayRotation": {
-			"text2": [
-				"Display",
-				"orientation"
-			],
-			"desc": "A=automatic | L=left-handed | R=right-handed"
-		},
-		"BoostTemperature": {
-			"text2": [
-				"Boost",
-				"temp"
-			],
-			"desc": "Temperature used in \"boost mode\""
-		},
-		"AutoStart": {
-			"text2": [
-				"Auto",
-				"start"
-			],
-			"desc": "Starts the iron into soldering mode on power up <O=off | S=soldering | Z=sleep | R=sleep at room temperature>"
-		},
-		"CooldownBlink": {
-			"text2": [
-				"Cooldown",
-				"blink"
-			],
-			"desc": "Flash the temperature after heating was halted, while the tip is still hot"
-		},
-		"TemperatureCalibration": {
-			"text2": [
-				"Calibrate",
-				"temperature?"
-			],
-			"desc": "Start tip temperature offset calibration"
-		},
-		"SettingsReset": {
-			"text2": [
-				"Factory",
-				"reset?"
-			],
-			"desc": "Reset settings to default"
-		},
-		"VoltageCalibration": {
-			"text2": [
-				"Calibrate",
-				"input voltage?"
-			],
-			"desc": "Start VIN calibration <long press to exit>"
-		},
-		"AdvancedSoldering": {
-			"text2": [
-				"Detailed",
-				"solder screen"
-			],
-			"desc": "Display detailed information in a smaller font on soldering screen"
-		},
-		"ScrollingSpeed": {
-			"text2": [
-				"Scrolling",
-				"speed"
-			],
-			"desc": "Speed info text scrolls past at <S=slow | F=fast>"
-		},
-		"TipModel": {
-			"text2": [
-				"Tip",
-				"model"
-			],
-			"desc": "Tip model selection"
-		},
-		"SimpleCalibrationMode": {
-			"text2": [
-				"Simple",
-				"calibration"
-			],
-			"desc": "Using hot water to calibrate tip"
-		},
-		"AdvancedCalibrationMode": {
-			"text2": [
-				"Advanced",
-				"calibration"
-			],
-			"desc": "Using a thermocouple on the tip to calibrate it"
-		},
-		"QCMaxVoltage": {
-			"text2": [
-				"QC",
-				"voltage"
-			],
-			"desc": "Desired max QC voltage the iron negotiates for"
-		},
-		"PowerLimit": {
-			"text2": [
-				"Power",
-				"limit"
-			],
-			"desc": "Maximum power the iron can use <W=watt>"
-		},
-		"ReverseButtonTempChange": {
-			"text2": [
-				"Reverse",
-				"+ - keys"
-			],
-			"desc": "Reverse assignment of temperature adjustment buttons"
-		},
-		"TempChangeShortStep": {
-			"text2": [
-				"Temp change",
-				"short"
-			],
-			"desc": "Temperature change increment on short button press"
-		},
-		"TempChangeLongStep": {
-			"text2": [
-				"Temp change",
-				"long"
-			],
-			"desc": "Temperature change increment on long button press"
-		},
-		"PowerPulsePower": {
-			"text2": [
-				"Power",
-				"pulse"
-			],
-			"desc": "Intensity of power of keep-awake-pulse <watt>"
-		},
-		"TipGain": {
-			"text2": [
-				"Modify",
-				"tip gain"
-			],
-			"desc": "Tip gain"
-		},
-		"HallEffSensitivity": {
-			"text2": [
-				"Hall sensor",
-				"sensitivity"
-			],
-			"desc": "Sensitivity of the Hall effect sensor to detect sleep <O=off | L=low | M=medium | H=high>"
-		},
-		"LockingMode": {
-			"text2": [
-				"Allow locking",
-				"buttons"
-			],
-			"desc": "When soldering, long press both buttons, to lock them <D=disable | B=\"boost mode\" only | F=full locking>"
-		}
-	}
-}

Translations/translation_es.json

@@ -1,279 +0,0 @@
-{
-	"languageCode": "ES",
-	"languageLocalName": "Castellano",
-	"cyrillicGlyphs": false,
-	"messages": {
-		"SettingsCalibrationDone": "¡Calibrada!",
-		"SettingsCalibrationWarning": "¡Asegúrate que la punta esté a temperatura ambiente antes de empezar!",
-		"SettingsResetWarning": "¿Quieres restablecer los ajustes?",
-		"UVLOWarningString": "CC BAJA",
-		"UndervoltageString": "Voltaje bajo",
-		"InputVoltageString": "Voltaje: ",
-		"WarningTipTempString": "Temp punta: ",
-		"BadTipString": "PT. ROTA",
-		"SleepingSimpleString": "Zzzz",
-		"SleepingAdvancedString": "En reposo...",
-		"WarningSimpleString": "QUEMA",
-		"WarningAdvancedString": "¡LA PUNTA QUEMA!",
-		"SleepingTipAdvancedString": "Punta:",
-		"IdleTipString": "Punta:",
-		"IdleSetString": " Aj:",
-		"TipDisconnectedString": "NO HAY PUNTA",
-		"SolderingAdvancedPowerPrompt": "Potencia: ",
-		"OffString": " No",
-		"ResetOKMessage": "Hecho.       ",
-		"YourGainMessage": "Gananc.:",
-		"SettingsResetMessage": "Ajustes borrados",
-		"NoAccelerometerMessage": "No accelerometer\ndetected!",
-		"NoPowerDeliveryMessage": "No USB-PD IC\ndetected!",
-		"LockingKeysString": " LOCKED",
-		"UnlockingKeysString": "UNLOCKED",
-		"WarningKeysLockedString": "!LOCKED!"
-	},
-	"characters": {
-		"SettingRightChar": "D",
-		"SettingLeftChar": "I",
-		"SettingAutoChar": "A",
-		"SettingFastChar": "R",
-		"SettingSlowChar": "L",
-		"SettingStartSolderingChar": "S",
-		"SettingStartSleepChar": "R",
-		"SettingStartSleepOffChar": "F",
-		"SettingStartNoneChar": "N",
-		"SettingSensitivityOff": "O",
-		"SettingSensitivityLow": "L",
-		"SettingSensitivityMedium": "M",
-		"SettingSensitivityHigh": "H",
-		"SettingLockDisableChar": "D",
-		"SettingLockBoostChar": "B",
-		"SettingLockFullChar": "F"
-	},
-	"menuGroups": {
-		"SolderingMenu": {
-			"text2": [
-				"Ajustes de",
-				"soldadura"
-			],
-			"desc": "Ajustes para soldar."
-		},
-		"PowerSavingMenu": {
-			"text2": [
-				"Modos de",
-				"reposo"
-			],
-			"desc": "Ajustes de ahorro energético."
-		},
-		"UIMenu": {
-			"text2": [
-				"Interfaz",
-				"de usuario"
-			],
-			"desc": "Ajustes de interfaz de usuario."
-		},
-		"AdvancedMenu": {
-			"text2": [
-				"Ajustes",
-				"avanzados"
-			],
-			"desc": "Ajustes avanzados."
-		}
-	},
-	"menuOptions": {
-		"DCInCutoff": {
-			"text2": [
-				"Fuente",
-				"de energía"
-			],
-			"desc": "Elige el tipo de fuente para limitar el voltaje <DC 10V> <S 3,3V por pila, ilimitado>"
-		},
-		"SleepTemperature": {
-			"text2": [
-				"Temperatura",
-				"en reposo"
-			],
-			"desc": "Temperatura de la punta en reposo."
-		},
-		"SleepTimeout": {
-			"text2": [
-				"Entrar",
-				"en reposo"
-			],
-			"desc": "Tiempo de inactividad para entrar en reposo <min/seg>"
-		},
-		"ShutdownTimeout": {
-			"text2": [
-				"Tiempo de",
-				"apagado"
-			],
-			"desc": "Tiempo de inactividad para apagarse <en minutos>"
-		},
-		"MotionSensitivity": {
-			"text2": [
-				"Detección de",
-				"movimiento"
-			],
-			"desc": "Tiempo de reacción al agarrar <0=no 1=menos sensible 9=más sensible>"
-		},
-		"TemperatureUnit": {
-			"text2": [
-				"Unidad de",
-				"temperatura"
-			],
-			"desc": "Unidad de temperatura <C=centígrados F=Fahrenheit>"
-		},
-		"AdvancedIdle": {
-			"text2": [
-				"Info extra en",
-				"modo reposo"
-			],
-			"desc": "Muestra información detallada en letra pequeña al reposar."
-		},
-		"DisplayRotation": {
-			"text2": [
-				"Orientación",
-				"de pantalla"
-			],
-			"desc": "Orientación de la pantalla <A=automático I=zurdo D=diestro>"
-		},
-		"BoostTemperature": {
-			"text2": [
-				"Ajustar la",
-				"temp. extra"
-			],
-			"desc": "Temperatura momentánea que se alcanza al apretar el botón del modo extra."
-		},
-		"AutoStart": {
-			"text2": [
-				"Calentar",
-				"al enchufar"
-			],
-			"desc": "Se calienta él solo al arrancar <S=entrar en modo soldar R=solo entrar en reposo F=en reposo pero mantiene la punta fría N=no>"
-		},
-		"CooldownBlink": {
-			"text2": [
-				"Parpadear",
-				"al enfriar"
-			],
-			"desc": "La temperatura en pantalla parpadea mientras la punta siga caliente."
-		},
-		"TemperatureCalibration": {
-			"text2": [
-				"Calibrar temp.",
-				"de la punta"
-			],
-			"desc": "Calibra la desviación térmica de la punta."
-		},
-		"SettingsReset": {
-			"text2": [
-				"Volver a ajustes",
-				"de fábrica"
-			],
-			"desc": "Restablece todos los ajustes a los valores originales."
-		},
-		"VoltageCalibration": {
-			"text2": [
-				"Calibrar voltaje",
-				"de entrada"
-			],
-			"desc": "Calibra VIN. Ajusta con ambos botones y mantén pulsado para salir."
-		},
-		"AdvancedSoldering": {
-			"text2": [
-				"Info extra",
-				"al soldar"
-			],
-			"desc": "Muestra más datos por pantalla cuando se está soldando."
-		},
-		"ScrollingSpeed": {
-			"text2": [
-				"Velocidad",
-				"del texto"
-			],
-			"desc": "Velocidad de desplazamiento del texto <R=rápida L=lenta>"
-		},
-		"TipModel": {
-			"text2": [
-				"Modelo de",
-				"punta"
-			],
-			"desc": "Elegir el modelo de punta actual."
-		},
-		"SimpleCalibrationMode": {
-			"text2": [
-				"Calibración",
-				"simple"
-			],
-			"desc": "Calibración simple con agua caliente."
-		},
-		"AdvancedCalibrationMode": {
-			"text2": [
-				"Calibración",
-				"avanzada"
-			],
-			"desc": "Calibrar con un termopar en la punta; más difícil."
-		},
-		"QCMaxVoltage": {
-			"text2": [
-				"Potencia de",
-				"entrada"
-			],
-			"desc": "Potencia en vatios del adaptador de corriente utilizado."
-		},
-		"PowerLimit": {
-			"text2": [
-				"Ajustar la",
-				"potenc. máx."
-			],
-			"desc": "Elige el límite de potencia máxima del soldador <en vatios>"
-		},
-		"ReverseButtonTempChange": {
-			"text2": [
-				"Invertir",
-				"botones +/-"
-			],
-			"desc": "Intercambia las funciones de subir y bajar la temperatura de los botones +/- para que funcionen al revés."
-		},
-		"TempChangeShortStep": {
-			"text2": [
-				"Cambio temp.",
-				"puls. cortas"
-			],
-			"desc": "Subir y bajar X grados de temperatura con cada pulsación corta de los botones +/-."
-		},
-		"TempChangeLongStep": {
-			"text2": [
-				"Cambio temp.",
-				"puls. largas"
-			],
-			"desc": "Subir y bajar X grados de temperatura con cada pulsación larga de los botones +/-."
-		},
-		"PowerPulsePower": {
-			"text2": [
-				"Pulsos bat.",
-				"constantes"
-			],
-			"desc": "Aplica unos pulsos necesarios para mantener encendidas ciertas baterías portátiles. En vatios."
-		},
-		"TipGain": {
-			"text2": [
-				"Ajustar ganancia",
-				"de punta"
-			],
-			"desc": "Modificar el valor de ganancia de la punta."
-		},
-		"HallEffSensitivity": {
-			"text2": [
-				"Hall Eff",
-				"Sensitivity"
-			],
-			"desc": "Sensitivity of the Hall effect sensor in detecting sleep <O=Off,L=Low,M=Medium,H=High>"
-		},
-		"LockingMode": {
-			"text2": [
-				"Allow buttons",
-				"locking"
-			],
-			"desc": "When soldering, long press on both buttons lock them <D=Disable, B=Boost only, F=Full locking>"
-		}
-	}
-}

Translations/translation_fi.json

@@ -1,279 +0,0 @@
-{
-	"languageCode": "FI",
-	"languageLocalName": "Suomi",
-	"cyrillicGlyphs": false,
-	"messages": {
-		"SettingsCalibrationDone": "Calibration done!",
-		"SettingsCalibrationWarning": "Varmista että kärki on huoneenlämpöinen ennen jatkamista!",
-		"SettingsResetWarning": "Haluatko varmasti palauttaa oletusarvot?",
-		"UVLOWarningString": "DC LOW",
-		"UndervoltageString": "Alijännite",
-		"InputVoltageString": "Jännite: ",
-		"WarningTipTempString": "Lämpötila: ",
-		"BadTipString": "VIKATILA",
-		"SleepingSimpleString": "Zzzz",
-		"SleepingAdvancedString": "Lepotila...",
-		"WarningSimpleString": "HOT",
-		"WarningAdvancedString": "! KÄRKI KUUMA !",
-		"SleepingTipAdvancedString": "Kärki:",
-		"IdleTipString": "Kärki:",
-		"IdleSetString": " Asetus:",
-		"TipDisconnectedString": "KÄRKI ON IRTI",
-		"SolderingAdvancedPowerPrompt": "Teho: ",
-		"OffString": "OFF",
-		"ResetOKMessage": "Reset OK",
-		"YourGainMessage": "Your gain:",
-		"SettingsResetMessage": "Settings were\nreset!",
-		"NoAccelerometerMessage": "No accelerometer\ndetected!",
-		"NoPowerDeliveryMessage": "No USB-PD IC\ndetected!",
-		"LockingKeysString": " LOCKED",
-		"UnlockingKeysString": "UNLOCKED",
-		"WarningKeysLockedString": "!LOCKED!"
-	},
-	"characters": {
-		"SettingRightChar": "O",
-		"SettingLeftChar": "V",
-		"SettingAutoChar": "A",
-		"SettingFastChar": "N",
-		"SettingSlowChar": "H",
-		"SettingStartSolderingChar": "T",
-		"SettingStartSleepChar": "S",
-		"SettingStartSleepOffChar": "O",
-		"SettingStartNoneChar": "F",
-		"SettingSensitivityOff": "O",
-		"SettingSensitivityLow": "L",
-		"SettingSensitivityMedium": "M",
-		"SettingSensitivityHigh": "H",
-		"SettingLockDisableChar": "D",
-		"SettingLockBoostChar": "B",
-		"SettingLockFullChar": "F"
-	},
-	"menuGroups": {
-		"SolderingMenu": {
-			"text2": [
-				"Juotos-",
-				"asetukset"
-			],
-			"desc": "Juotosasetukset"
-		},
-		"PowerSavingMenu": {
-			"text2": [
-				"Lepotilan",
-				"asetukset"
-			],
-			"desc": "Virransäästöasetukset"
-		},
-		"UIMenu": {
-			"text2": [
-				"Käyttö-",
-				"liittymä"
-			],
-			"desc": "Käyttöliittymän asetukset"
-		},
-		"AdvancedMenu": {
-			"text2": [
-				"Lisä-",
-				"asetukset"
-			],
-			"desc": "Lisäasetukset"
-		}
-	},
-	"menuOptions": {
-		"DCInCutoff": {
-			"text2": [
-				"Virtalähde",
-				"DC"
-			],
-			"desc": "Käytettävä virtalähde. Asettaa katkaisujänniteen. <DC 10V, 3S=9.9V, 4S=13.2V, 5S=16.5V, 6S=19.8V>"
-		},
-		"SleepTemperature": {
-			"text2": [
-				"Lepotilan",
-				"lämpötila"
-			],
-			"desc": "Lepotilan lämpötila. <C>"
-		},
-		"SleepTimeout": {
-			"text2": [
-				"Lepotilan",
-				"viive"
-			],
-			"desc": "Lepotilan viive. <minuuttia/sekuntia>"
-		},
-		"ShutdownTimeout": {
-			"text2": [
-				"Sammutus",
-				"viive"
-			],
-			"desc": "Automaattisen sammutuksen aikaviive. <minuuttia>"
-		},
-		"MotionSensitivity": {
-			"text2": [
-				"Liikkeen",
-				"herkkyys"
-			],
-			"desc": "Liikkeentunnistuksen herkkyys. <0=pois, 1=epäherkin, 9=herkin>"
-		},
-		"TemperatureUnit": {
-			"text2": [
-				"Lämpötilan",
-				"yksikkö"
-			],
-			"desc": "Lämpötilan yksikkö. <C=celsius, F=fahrenheit>"
-		},
-		"AdvancedIdle": {
-			"text2": [
-				"Tiedot",
-				"lepotilassa"
-			],
-			"desc": "Näyttää yksityiskohtaisemmat tiedot lepotilassa."
-		},
-		"DisplayRotation": {
-			"text2": [
-				"Näytön",
-				"kierto"
-			],
-			"desc": "Näytön kierto. <A=automaattinen O=oikeakätinen V=vasenkätinen>"
-		},
-		"BoostTemperature": {
-			"text2": [
-				"Tehostus-",
-				"lämpötila"
-			],
-			"desc": "Tehostustilan lämpötila"
-		},
-		"AutoStart": {
-			"text2": [
-				"Autom.",
-				"käynnistys"
-			],
-			"desc": "Käynnistää virrat kytkettäessä juotostilan automaattisesti. T=juotostila, S=Lepotila, F=Ei käytössä"
-		},
-		"CooldownBlink": {
-			"text2": [
-				"Jäähdytyksen",
-				"vilkutus"
-			],
-			"desc": "Vilkuttaa jäähtyessä juotoskärjen lämpötilaa sen ollessa vielä vaarallisen kuuma."
-		},
-		"TemperatureCalibration": {
-			"text2": [
-				"Kalibroi",
-				"lämpötila?"
-			],
-			"desc": "Kalibroi kärjen lämpötilaeron."
-		},
-		"SettingsReset": {
-			"text2": [
-				"Palauta",
-				"tehdasasetukset?"
-			],
-			"desc": "Palauta kaikki asetukset oletusarvoihin."
-		},
-		"VoltageCalibration": {
-			"text2": [
-				"Kalibroi",
-				"tulojännite?"
-			],
-			"desc": "Tulojännitten kalibrointi (VIN). Painikkeilla säädetään ja pitkään painamalla poistutaan."
-		},
-		"AdvancedSoldering": {
-			"text2": [
-				"Tarkempi",
-				"juotosnäyttö"
-			],
-			"desc": "Näyttää yksityiskohtaisemmat tiedot juotostilassa."
-		},
-		"ScrollingSpeed": {
-			"text2": [
-				"Tietojen",
-				"näyttönopeus"
-			],
-			"desc": "Näiden selitetekstien vieritysnopeus."
-		},
-		"TipModel": {
-			"text2": [
-				"Tip",
-				"Model"
-			],
-			"desc": "Tip Model selection"
-		},
-		"SimpleCalibrationMode": {
-			"text2": [
-				"Simple",
-				"Calibration"
-			],
-			"desc": "Simple Calibration using Hot water"
-		},
-		"AdvancedCalibrationMode": {
-			"text2": [
-				"Advanced",
-				"Calibration"
-			],
-			"desc": "Advanced calibration using thermocouple on the tip"
-		},
-		"QCMaxVoltage": {
-			"text2": [
-				"Power",
-				"Wattage"
-			],
-			"desc": "Power Wattage of the power adapter used"
-		},
-		"PowerLimit": {
-			"text2": [
-				"Power",
-				"Limit"
-			],
-			"desc": "Maximum power the iron can use <Watts>"
-		},
-		"ReverseButtonTempChange": {
-			"text2": [
-				"Key +-",
-				"reverse?"
-			],
-			"desc": "Reverse the tip temperature change buttons plus minus assignment."
-		},
-		"TempChangeShortStep": {
-			"text2": [
-				"Temp change",
-				"short?"
-			],
-			"desc": "Temperature change steps on short button press!"
-		},
-		"TempChangeLongStep": {
-			"text2": [
-				"Temp change",
-				"long?"
-			],
-			"desc": "Temperature change steps on long button press!"
-		},
-		"PowerPulsePower": {
-			"text2": [
-				"Power",
-				"Pulse W"
-			],
-			"desc": "Keep awake pulse power intensity"
-		},
-		"TipGain": {
-			"text2": [
-				"Modify",
-				"tip gain"
-			],
-			"desc": "Tip gain"
-		},
-		"HallEffSensitivity": {
-			"text2": [
-				"Hall Eff",
-				"Sensitivity"
-			],
-			"desc": "Sensitivity of the Hall effect sensor in detecting sleep <O=Off,L=Low,M=Medium,H=High>"
-		},
-		"LockingMode": {
-			"text2": [
-				"Allow buttons",
-				"locking"
-			],
-			"desc": "When soldering, long press on both buttons lock them <D=Disable, B=Boost only, F=Full locking>"
-		}
-	}
-}

Translations/translation_fr.json

@@ -1,279 +0,0 @@
-{
-	"languageCode": "FR",
-	"languageLocalName": "Français",
-	"cyrillicGlyphs": false,
-	"messages": {
-		"SettingsCalibrationDone": "Calibration effectuée !",
-		"SettingsCalibrationWarning": "Assurez-vous que la panne soit à température ambiante avant de continuer !",
-		"SettingsResetWarning": "Voulez-vous vraiment réinitialiser les paramètres aux valeurs par défaut ?",
-		"UVLOWarningString": "DC FAIBL",
-		"UndervoltageString": "Sous-tension",
-		"InputVoltageString": "V d'entrée : ",
-		"WarningTipTempString": "Temp. Panne : ",
-		"BadTipString": "PANNE HS",
-		"SleepingSimpleString": "Zzzz",
-		"SleepingAdvancedString": "En veille...",
-		"WarningSimpleString": "CHAUD !",
-		"WarningAdvancedString": "ATTENTION ! CHAUD !",
-		"SleepingTipAdvancedString": "Panne : ",
-		"IdleTipString": "Act : ",
-		"IdleSetString": "Reg : ",
-		"TipDisconnectedString": "PANNE DÉBRANCHÉE",
-		"SolderingAdvancedPowerPrompt": "Puissance : ",
-		"OffString": "Off",
-		"ResetOKMessage": "Reset OK",
-		"YourGainMessage": "Gain : ",
-		"SettingsResetMessage": "Réglage réinit. !",
-		"NoAccelerometerMessage": "Accéléromètre\nnon détecté !",
-		"NoPowerDeliveryMessage": "Pas d'USB-PD\ndétecté !",
-		"LockingKeysString": "VERROUIL",
-		"UnlockingKeysString": "DEVERROU",
-		"WarningKeysLockedString": "! VERR. !"
-	},
-	"characters": {
-		"SettingRightChar": "D",
-		"SettingLeftChar": "G",
-		"SettingAutoChar": "A",
-		"SettingFastChar": "R",
-		"SettingSlowChar": "L",
-		"SettingStartSolderingChar": "A",
-		"SettingStartSleepChar": "V",
-		"SettingStartSleepOffChar": "O",
-		"SettingStartNoneChar": "D",
-		"SettingSensitivityOff": "D",
-		"SettingSensitivityLow": "B",
-		"SettingSensitivityMedium": "M",
-		"SettingSensitivityHigh": "H",
-		"SettingLockDisableChar": "D",
-		"SettingLockBoostChar": "B",
-		"SettingLockFullChar": "V"
-	},
-	"menuGroups": {
-		"SolderingMenu": {
-			"text2": [
-				"Paramètres",
-				"de soudure"
-			],
-			"desc": "Paramètres de soudure"
-		},
-		"PowerSavingMenu": {
-			"text2": [
-				"Mode",
-				"veille"
-			],
-			"desc": "Paramètres d'économie d'énergie"
-		},
-		"UIMenu": {
-			"text2": [
-				"Interface",
-				"utilisateur"
-			],
-			"desc": "Paramètres de l'interface utilisateur"
-		},
-		"AdvancedMenu": {
-			"text2": [
-				"Options",
-				"avancées"
-			],
-			"desc": "Options avancées"
-		}
-	},
-	"menuOptions": {
-		"DCInCutoff": {
-			"text2": [
-				"Source",
-				"d'alim."
-			],
-			"desc": "Source d'alimentation. Règle la tension de coupure <DC=10V> <S=3.3V par cellules>"
-		},
-		"SleepTemperature": {
-			"text2": [
-				"Temp.",
-				"veille"
-			],
-			"desc": "Température en veille <C>"
-		},
-		"SleepTimeout": {
-			"text2": [
-				"Délai",
-				"veille"
-			],
-			"desc": "Délai avant mise en veille <S=secondes | M=minutes>"
-		},
-		"ShutdownTimeout": {
-			"text2": [
-				"Délai",
-				"extinction"
-			],
-			"desc": "Délai avant extinction <M=minutes>"
-		},
-		"MotionSensitivity": {
-			"text2": [
-				"Sensibilité",
-				"au mouvement"
-			],
-			"desc": "0=inactif | 1=peu sensible | ... | 9=très sensible"
-		},
-		"TemperatureUnit": {
-			"text2": [
-				"Unité de",
-				"température"
-			],
-			"desc": "Unité de température <C=Celsius | F=Fahrenheit>"
-		},
-		"AdvancedIdle": {
-			"text2": [
-				"Écran veille",
-				"détaillé"
-			],
-			"desc": "Afficher les informations détaillées lors de la veille."
-		},
-		"DisplayRotation": {
-			"text2": [
-				"Orientation",
-				"de l'écran"
-			],
-			"desc": "Orientation de l'affichage <A=automatique | G=gaucher | D=droitier>"
-		},
-		"BoostTemperature": {
-			"text2": [
-				"Temp.",
-				"Boost"
-			],
-			"desc": "Température du mode \"Boost\""
-		},
-		"AutoStart": {
-			"text2": [
-				"Démarrage",
-				"automatique"
-			],
-			"desc": "Démarrer automatiquement la soudure à l'allumage <D=désactivé | A=activé | V=mode veille | O=mode veille à température ambiante>"
-		},
-		"CooldownBlink": {
-			"text2": [
-				"Refroidir en",
-				"clignotant"
-			],
-			"desc": "Faire clignoter la température lors du refroidissement tant que la panne est chaude."
-		},
-		"TemperatureCalibration": {
-			"text2": [
-				"Étalonner",
-				"température"
-			],
-			"desc": "Étalonner température de la panne."
-		},
-		"SettingsReset": {
-			"text2": [
-				"Réinitialisation",
-				"d'usine"
-			],
-			"desc": "Réinitialiser tous les réglages"
-		},
-		"VoltageCalibration": {
-			"text2": [
-				"Étalonner",
-				"tension d'entrée"
-			],
-			"desc": "Étalonner tension d'entrée <appui long pour quitter>"
-		},
-		"AdvancedSoldering": {
-			"text2": [
-				"Écran soudure",
-				"détaillé"
-			],
-			"desc": "Afficher les informations détaillées pendant la soudure"
-		},
-		"ScrollingSpeed": {
-			"text2": [
-				"Vitesse de",
-				"défilement"
-			],
-			"desc": "Vitesse de défilement du texte <R=rapide | L=lent>"
-		},
-		"TipModel": {
-			"text2": [
-				"Modèle de",
-				"la panne"
-			],
-			"desc": "Sélection du modèle de la panne"
-		},
-		"SimpleCalibrationMode": {
-			"text2": [
-				"Calibration",
-				"simple"
-			],
-			"desc": "Calibration simple à l'aide d'eau chaude"
-		},
-		"AdvancedCalibrationMode": {
-			"text2": [
-				"Calibration",
-				"avancée"
-			],
-			"desc": "Calibration avancée à l'aide d'un thermocouple sur la panne"
-		},
-		"QCMaxVoltage": {
-			"text2": [
-				"Tension max.",
-				"QC"
-			],
-			"desc": "Tension maximale désirée avec une alimentation QC"
-		},
-		"PowerLimit": {
-			"text2": [
-				"Limite de",
-				"puissance"
-			],
-			"desc": "Puissance maximale utilisable <W=watts>"
-		},
-		"ReverseButtonTempChange": {
-			"text2": [
-				"Inverser les",
-				"touches + -"
-			],
-			"desc": "Inverser l'assignation des boutons d'ajustement de température de la panne."
-		},
-		"TempChangeShortStep": {
-			"text2": [
-				"Incrément",
-				"appui court"
-			],
-			"desc": "Incrément de changement de température sur appui court."
-		},
-		"TempChangeLongStep": {
-			"text2": [
-				"Incrément",
-				"appui long"
-			],
-			"desc": "Incrément de changement de température sur appui long."
-		},
-		"PowerPulsePower": {
-			"text2": [
-				"Puissance des",
-				"impulsions"
-			],
-			"desc": "Puissance des impulsions pour éviter la mise en veille des batteries <watt>"
-		},
-		"TipGain": {
-			"text2": [
-				"Modifier",
-				"gain panne"
-			],
-			"desc": "Modifier le gain de la panne"
-		},
-		"LockingMode": {
-			"text2": [
-				"Verrouiller",
-				"les boutons"
-			],
-			"desc": "Pendant la soudure, appuyer sur les deux boutons pour les verrouiller <D=désactivé | B=boost seulement | V=verr. total>"
-		},
-		"HallEffSensitivity": {
-			"text2": [
-				"Sensibilité",
-				"capteur effet hall"
-			],
-			"desc": "Sensibilité du capteur à effet Hall lors de la détection de mise en veille <D=désactivé | B=basse | M=moyenne | H=haute>"
-		}
-	}
-}

Translations/translation_hr.json

@@ -1,279 +0,0 @@
-{
-	"languageCode": "HR",
-	"languageLocalName": "Hrvatski",
-	"cyrillicGlyphs": false,
-	"messages": {
-		"SettingsCalibrationDone": "Kalibracija gotova!",
-		"SettingsCalibrationWarning": "Provjerite da je vršak ohlađen na sobnu temperaturu prije nego što nastavite!",
-		"SettingsResetWarning": "Jeste li sigurni da želite sve postavke vratiti na tvorničke vrijednosti?",
-		"UVLOWarningString": "BATERIJA",
-		"UndervoltageString": "PRENIZAK NAPON",
-		"InputVoltageString": "Napajanje: ",
-		"WarningTipTempString": "Temp vrha: ",
-		"BadTipString": "LOŠ VRH",
-		"SleepingSimpleString": "Zzz ",
-		"SleepingAdvancedString": "SPAVANJE...",
-		"WarningSimpleString": "VRUĆ",
-		"WarningAdvancedString": "OPREZ, VRUĆE!",
-		"SleepingTipAdvancedString": "Vrh: ",
-		"IdleTipString": "Vrh: ",
-		"IdleSetString": " / ",
-		"TipDisconnectedString": "VRH NIJE SPOJEN!",
-		"SolderingAdvancedPowerPrompt": "Snaga: ",
-		"OffString": "Off",
-		"ResetOKMessage": "Reset OK",
-		"YourGainMessage": "Your gain:",
-		"SettingsResetMessage": "Settings were\nreset!",
-		"NoAccelerometerMessage": "No accelerometer\ndetected!",
-		"NoPowerDeliveryMessage": "No USB-PD IC\ndetected!",
-		"LockingKeysString": " LOCKED",
-		"UnlockingKeysString": "UNLOCKED",
-		"WarningKeysLockedString": "!LOCKED!"
-	},
-	"characters": {
-		"SettingRightChar": "D",
-		"SettingLeftChar": "L",
-		"SettingAutoChar": "A",
-		"SettingFastChar": "B",
-		"SettingSlowChar": "S",
-		"SettingStartSolderingChar": "T",
-		"SettingStartSleepChar": "S",
-		"SettingStartSleepOffChar": "O",
-		"SettingStartNoneChar": "F",
-		"SettingSensitivityOff": "O",
-		"SettingSensitivityLow": "L",
-		"SettingSensitivityMedium": "M",
-		"SettingSensitivityHigh": "H",
-		"SettingLockDisableChar": "D",
-		"SettingLockBoostChar": "B",
-		"SettingLockFullChar": "F"
-	},
-	"menuGroups": {
-		"SolderingMenu": {
-			"text2": [
-				"Postavke",
-				"lemljenja"
-			],
-			"desc": "Postavke pri lemljenju"
-		},
-		"PowerSavingMenu": {
-			"text2": [
-				"Ušteda",
-				"energije"
-			],
-			"desc": "Postavke spavanja i štednje energije"
-		},
-		"UIMenu": {
-			"text2": [
-				"Korisničko",
-				"sučelje"
-			],
-			"desc": "Postavke korisničkog sučelja"
-		},
-		"AdvancedMenu": {
-			"text2": [
-				"Napredne",
-				"opcije"
-			],
-			"desc": "Upravljanje naprednim opcijama"
-		}
-	},
-	"menuOptions": {
-		"DCInCutoff": {
-			"text2": [
-				"Izvor",
-				"napajanja"
-			],
-			"desc": "Izvor napajanja. Postavlja napon isključivanja. <DC 10V> <S 3.3V po ćeliji>"
-		},
-		"SleepTemperature": {
-			"text2": [
-				"Temp",
-				"spavanja"
-			],
-			"desc": "Temperatura na koju se spušta lemilica nakon određenog vremena mirovanja. <C/F>"
-		},
-		"SleepTimeout": {
-			"text2": [
-				"Vrijeme",
-				"spavanja"
-			],
-			"desc": "Vrijeme mirovanja nakon kojega lemilica spušta temperaturu. <Minute/Sekunde>"
-		},
-		"ShutdownTimeout": {
-			"text2": [
-				"Vrijeme",
-				"gašenja"
-			],
-			"desc": "Vrijeme mirovanja nakon kojega će se lemilica ugasiti. <Minute>"
-		},
-		"MotionSensitivity": {
-			"text2": [
-				"Osjetljivost",
-				"pokreta"
-			],
-			"desc": "Osjetljivost prepoznavanja pokreta. <0=Ugašeno, 1=Najmanje osjetljivo, 9=Najosjetljivije>"
-		},
-		"TemperatureUnit": {
-			"text2": [
-				"Jedinica",
-				"temperature"
-			],
-			"desc": "Jedinica temperature. <C=Celzij, F=Fahrenheit>"
-		},
-		"AdvancedIdle": {
-			"text2": [
-				"Detalji",
-				"pri čekanju"
-			],
-			"desc": "Prikazivanje detaljnih informacija tijekom čekanja."
-		},
-		"DisplayRotation": {
-			"text2": [
-				"Rotacija",
-				"ekrana"
-			],
-			"desc": "Orijentacija ekrana. <A=Automatski, L=Ljevoruki, D=Desnoruki>"
-		},
-		"BoostTemperature": {
-			"text2": [
-				"Boost",
-				"temp"
-			],
-			"desc": "Temperatura u pojačanom (Boost) načinu."
-		},
-		"AutoStart": {
-			"text2": [
-				"Auto",
-				"start"
-			],
-			"desc": "Ako je aktivno, lemilica po uključivanju napajanja odmah počinje grijati."
-		},
-		"CooldownBlink": {
-			"text2": [
-				"Upozorenje",
-				"pri hlađenju"
-			],
-			"desc": "Bljeskanje temperature prilikom hlađenja, ako je lemilica vruća."
-		},
-		"TemperatureCalibration": {
-			"text2": [
-				"Kalibracija",
-				"temperature"
-			],
-			"desc": "Kalibriranje temperature mjeri razliku temperatura vrška i drške, dok je lemilica hladna."
-		},
-		"SettingsReset": {
-			"text2": [
-				"Tvorničke",
-				"postavke"
-			],
-			"desc": "Vraćanje svih postavki na tvorničke vrijednosti."
-		},
-		"VoltageCalibration": {
-			"text2": [
-				"Kalibracija",
-				"napona napajanja"
-			],
-			"desc": "Kalibracija ulaznog napona. Podešavanje gumbima, dugački pritisak za kraj."
-		},
-		"AdvancedSoldering": {
-			"text2": [
-				"Detalji",
-				"pri lemljenju"
-			],
-			"desc": "Prikazivanje detaljnih informacija tijekom lemljenja."
-		},
-		"ScrollingSpeed": {
-			"text2": [
-				"Brzina",
-				"poruka"
-			],
-			"desc": "Brzina kretanja dugačkih poruka. <B=brzo, S=sporo>"
-		},
-		"TipModel": {
-			"text2": [
-				"Model",
-				"Vrha"
-			],
-			"desc": "Odabir modela lemnog vrha"
-		},
-		"SimpleCalibrationMode": {
-			"text2": [
-				"Jednostavna",
-				"kalibracija"
-			],
-			"desc": "Kalibracija kipućom vodom"
-		},
-		"AdvancedCalibrationMode": {
-			"text2": [
-				"Napredna",
-				"kalibracija"
-			],
-			"desc": "Kalibracija korištenjem termo-elementa"
-		},
-		"QCMaxVoltage": {
-			"text2": [
-				"Snaga",
-				"napajanja"
-			],
-			"desc": "Snaga modula za napajanje"
-		},
-		"PowerLimit": {
-			"text2": [
-				"Power",
-				"Limit"
-			],
-			"desc": "Maximum power the iron can use <Watts>"
-		},
-		"ReverseButtonTempChange": {
-			"text2": [
-				"Key +-",
-				"reverse?"
-			],
-			"desc": "Reverse the tip temperature change buttons plus minus assignment."
-		},
-		"TempChangeShortStep": {
-			"text2": [
-				"Temp change",
-				"short?"
-			],
-			"desc": "Temperature change steps on short button press!"
-		},
-		"TempChangeLongStep": {
-			"text2": [
-				"Temp change",
-				"long?"
-			],
-			"desc": "Temperature change steps on long button press!"
-		},
-		"PowerPulsePower": {
-			"text2": [
-				"Power",
-				"Pulse W"
-			],
-			"desc": "Keep awake pulse power intensity"
-		},
-		"TipGain": {
-			"text2": [
-				"Modify",
-				"tip gain"
-			],
-			"desc": "Tip gain"
-		},
-		"HallEffSensitivity": {
-			"text2": [
-				"Hall Eff",
-				"Sensitivity"
-			],
-			"desc": "Sensitivity of the Hall effect sensor in detecting sleep <O=Off,L=Low,M=Medium,H=High>"
-		},
-		"LockingMode": {
-			"text2": [
-				"Allow buttons",
-				"locking"
-			],
-			"desc": "When soldering, long press on both buttons lock them <D=Disable, B=Boost only, F=Full locking>"
-		}
-	}
-}

Translations/translation_hu.json

@@ -1,279 +0,0 @@
-{
-	"languageCode": "HU",
-	"languageLocalName": "Magyar",
-	"cyrillicGlyphs": false,
-	"messages": {
-		"SettingsCalibrationDone": "Kalibráció befejezve!",
-		"SettingsCalibrationWarning": "Folytatás előtt győződjön meg róla, hogy a páka szobahőmérsékletű!",
-		"SettingsResetWarning": "Biztosan visszaállítja a beállításokat az alapértelmezett értékekre?",
-		"UVLOWarningString": "DC KEVÉS",
-		"UndervoltageString": "Alulfeszültség",
-		"InputVoltageString": "Bemenet V: ",
-		"WarningTipTempString": "Hegy hő: ",
-		"BadTipString": "PÁKAHIBA",
-		"SleepingSimpleString": "Zzzz",
-		"SleepingAdvancedString": "Alvás...",
-		"WarningSimpleString": "FORRÓ!",
-		"WarningAdvancedString": "!! FORRÓ PÁKA !!",
-		"SleepingTipAdvancedString": "Páka:",
-		"IdleTipString": "Páka:",
-		"IdleSetString": "Cél:",
-		"TipDisconnectedString": "PÁKA LEVÉVE",
-		"SolderingAdvancedPowerPrompt": "Telj: ",
-		"OffString": "Ki",
-		"ResetOKMessage": "Törlés OK",
-		"YourGainMessage": "Erősítés:",
-		"SettingsResetMessage": "Beállítások\ntörölve!",
-		"NoAccelerometerMessage": "Nincs gyorsulásmérő!",
-		"NoPowerDeliveryMessage": "Nincs USB-PD IC!",
-		"LockingKeysString": "LEZÁRVA",
-		"UnlockingKeysString": "FELOLDVA",
-		"WarningKeysLockedString": "!LEZÁRVA!"
-	},
-	"characters": {
-		"SettingRightChar": "J",
-		"SettingLeftChar": "B",
-		"SettingAutoChar": "A",
-		"SettingFastChar": "G",
-		"SettingSlowChar": "L",
-		"SettingStartSolderingChar": "F",
-		"SettingStartSleepChar": "Z",
-		"SettingStartSleepOffChar": "S",
-		"SettingStartNoneChar": "K",
-		"SettingSensitivityOff": "0",
-		"SettingSensitivityLow": "A",
-		"SettingSensitivityMedium": "K",
-		"SettingSensitivityHigh": "M",
-		"SettingLockDisableChar": "K",
-		"SettingLockBoostChar": "B",
-		"SettingLockFullChar": "T"
-	},
-	"menuGroups": {
-		"SolderingMenu": {
-			"text2": [
-				"Forrasztási",
-				"beállítások"
-			],
-			"desc": "Forrasztási beállítások"
-		},
-		"PowerSavingMenu": {
-			"text2": [
-				"Alvási",
-				"módok"
-			],
-			"desc": "Energiatakarékossági beállítások"
-		},
-		"UIMenu": {
-			"text2": [
-				"Felhasználói",
-				"felület"
-			],
-			"desc": "Felhasználói felület beállításai"
-		},
-		"AdvancedMenu": {
-			"text2": [
-				"Haladó",
-				"beállítások"
-			],
-			"desc": "Haladó beállítások"
-		}
-	},
-	"menuOptions": {
-		"DCInCutoff": {
-			"text2": [
-				"Áram",
-				"forrás"
-			],
-			"desc": "Kikapcsolási feszültség beállítása (DC:10V, S:3.3V/LiPo cella)"
-		},
-		"SleepTemperature": {
-			"text2": [
-				"Alvási",
-				"hőmérs."
-			],
-			"desc": "Hőmérséklet alvó módban <C/F>"
-		},
-		"SleepTimeout": {
-			"text2": [
-				"Alvás",
-				"időzítő"
-			],
-			"desc": "Alvási időzítő <perc/másodperc>"
-		},
-		"ShutdownTimeout": {
-			"text2": [
-				"Kikapcsolás",
-				"időzítő"
-			],
-			"desc": "Kikapcsolási időzítő <perc>"
-		},
-		"MotionSensitivity": {
-			"text2": [
-				"Mozgás",
-				"érzékenység"
-			],
-			"desc": "Mozgás érzékenység beállítása (0=kikapcsolva 1=legkevésbé érzékeny 9=legérzékenyebb)"
-		},
-		"TemperatureUnit": {
-			"text2": [
-				"Hőmérséklet",
-				"mértékegysége"
-			],
-			"desc": "Hőmérséklet mértékegysége (C=Celsius F=Fahrenheit)"
-		},
-		"AdvancedIdle": {
-			"text2": [
-				"Részletes",
-				"készenlét"
-			],
-			"desc": "Részletes információk megjelenítése kisebb betűméretben a készenléti képernyőn"
-		},
-		"DisplayRotation": {
-			"text2": [
-				"Kijelző",
-				"tájolása"
-			],
-			"desc": "Kijelző tájolása (A=automatikus B=balkezes J=jobbkezes)"
-		},
-		"BoostTemperature": {
-			"text2": [
-				"Boost",
-				"hőmérs."
-			],
-			"desc": "Hőmérséklet \"boost\" módban"
-		},
-		"AutoStart": {
-			"text2": [
-				"Automatikus",
-				"indítás"
-			],
-			"desc": "Bekapcsolás után automatikusan lépjen forrasztás módba (F=forrasztás S=szobahőmérséklet Z=alvó mód K=ki)"
-		},
-		"CooldownBlink": {
-			"text2": [
-				"Villogás",
-				"hűléskor"
-			],
-			"desc": "Villogjon a hőmérséklet hűlés közben, amíg a páka forró"
-		},
-		"TemperatureCalibration": {
-			"text2": [
-				"Hőmérséklet",
-				"kalibrálása?"
-			],
-			"desc": "Páka hőmérséklet-érzékelőjének kalibrálása"
-		},
-		"SettingsReset": {
-			"text2": [
-				"Gyári",
-				"beállítások?"
-			],
-			"desc": "Beállítások alaphelyzetbe állítása"
-		},
-		"VoltageCalibration": {
-			"text2": [
-				"Bemeneti fesz.",
-				"kalibrálása?"
-			],
-			"desc": "Bemeneti feszültség kalibrálása (röviden megnyomva módosítás, hosszan megnyomva kilépés)"
-		},
-		"AdvancedSoldering": {
-			"text2": [
-				"Részletes",
-				"forr.kép"
-			],
-			"desc": "Részletes információk megjelenítése forrasztás közben"
-		},
-		"ScrollingSpeed": {
-			"text2": [
-				"Görgetés",
-				"sebessége"
-			],
-			"desc": "Szöveggörgetés sebessége"
-		},
-		"TipModel": {
-			"text2": [
-				"Forr.páka",
-				"modell"
-			],
-			"desc": "Forrasztópáka modell kiválasztása"
-		},
-		"SimpleCalibrationMode": {
-			"text2": [
-				"Egyszerű",
-				"kalibráció"
-			],
-			"desc": "Egyszerű kalibrálás forró víz segítségével"
-		},
-		"AdvancedCalibrationMode": {
-			"text2": [
-				"Haladó",
-				"Kalibráció"
-			],
-			"desc": "Haladó kalibrálás hegyre helyezett hőelem segítségével"
-		},
-		"QCMaxVoltage": {
-			"text2": [
-				"Max. USB",
-				"fesz."
-			],
-			"desc": "Maximális USB feszültség (QuickCharge)"
-		},
-		"PowerLimit": {
-			"text2": [
-				"Teljesítm.",
-				"maximum"
-			],
-			"desc": "Maximális felvett teljesitmény beállitása"
-		},
-		"ReverseButtonTempChange": {
-			"text2": [
-				"+/- gomb",
-				"fordítva"
-			],
-			"desc": "Páka hőmérséklet növelés/csökkentés gombok felcserélése"
-		},
-		"TempChangeShortStep": {
-			"text2": [
-				"Hőm.váltás",
-				"rövid"
-			],
-			"desc": "Hőmérséklet váltás rövid gombnyomásra <C/F>"
-		},
-		"TempChangeLongStep": {
-			"text2": [
-				"Hőm.váltás",
-				"hosszú"
-			],
-			"desc": "Hőmérséklet váltás hosszú gombnyomásra <C/F>"
-		},
-		"PowerPulsePower": {
-			"text2": [
-				"Ébrentartó",
-				"pulzus W"
-			],
-			"desc": "Powerbankot ébrentartó áramfelvételi pulzusok nagysága <W>"
-		},
-		"TipGain": {
-			"text2": [
-				"Pákaerősítés",
-				""
-			],
-			"desc": "Pákaerősítés állítása"
-		},
-		"HallEffSensitivity": {
-			"text2": [
-				"Alvásérzékelő",
-				"érzékenység"
-			],
-			"desc": "Alvásérzékelő gyorsulásmérő érzékenysége (0=ki A=alacsony K=közepes M=magas)"
-		},
-		"LockingMode": {
-			"text2": [
-				"Lezárás",
-				"enged."
-			],
-			"desc": "Forrasztás közben mindkét gombot hosszan lenyomva rögzíti a hőmérsékletet (K=ki B=csak \"boost\" mód T=teljes lezárás)"
-		}
-	}
-}

Translations/translation_lt.json

@@ -1,279 +0,0 @@
-{
-	"languageCode": "LT",
-	"languageLocalName": "Lietuvių",
-	"cyrillicGlyphs": false,
-	"messages": {
-		"SettingsCalibrationDone": "Kalibravimas atliktas!",
-		"SettingsCalibrationWarning": "Prieš tęsdami įsitikinkite, kad antgalis yra kambario temperatūros!",
-		"SettingsResetWarning": "Ar norite atstatyti nustatymus į numatytas reikšmes?",
-		"UVLOWarningString": "MAŽ VOLT",
-		"UndervoltageString": "Žema įtampa",
-		"InputVoltageString": "Įvestis V: ",
-		"WarningTipTempString": "Angal Temp: ",
-		"BadTipString": "BLOG ANT",
-		"SleepingSimpleString": "Zzzz",
-		"SleepingAdvancedString": "Miegu...",
-		"WarningSimpleString": "KRŠ!",
-		"WarningAdvancedString": "ANTGALIS KARŠTAS",
-		"SleepingTipAdvancedString": "Angal:",
-		"IdleTipString": "Ant:",
-		"IdleSetString": " Nust:",
-		"TipDisconnectedString": "NĖRA ANTGALIO",
-		"SolderingAdvancedPowerPrompt": "Galia: ",
-		"OffString": "Išj",
-		"ResetOKMessage": "Reset OK",
-		"YourGainMessage": "Gain:",
-		"SettingsResetMessage": "Nust. atstatyti!",
-		"NoAccelerometerMessage": "No accelerometer\ndetected!",
-		"NoPowerDeliveryMessage": "No USB-PD IC\ndetected!",
-		"LockingKeysString": " UŽRAKIN",
-		"UnlockingKeysString": "ATRAKIN",
-		"WarningKeysLockedString": "!UŽRAK!"
-	},
-	"characters": {
-		"SettingRightChar": "D",
-		"SettingLeftChar": "K",
-		"SettingAutoChar": "A",
-		"SettingFastChar": "G",
-		"SettingSlowChar": "L",
-		"SettingStartSolderingChar": "T",
-		"SettingStartSleepChar": "M",
-		"SettingStartSleepOffChar": "K",
-		"SettingStartNoneChar": "N",
-		"SettingSensitivityOff": "I",
-		"SettingSensitivityLow": "Ž",
-		"SettingSensitivityMedium": "V",
-		"SettingSensitivityHigh": "A",
-		"SettingLockDisableChar": "I",
-		"SettingLockBoostChar": "T",
-		"SettingLockFullChar": "V"
-	},
-	"menuGroups": {
-		"SolderingMenu": {
-			"text2": [
-				"Litavimo",
-				"nustatymai"
-			],
-			"desc": "Litavimo nustatymai"
-		},
-		"PowerSavingMenu": {
-			"text2": [
-				"Miego",
-				"režimai"
-			],
-			"desc": "Energijos tausojimo nustatymai"
-		},
-		"UIMenu": {
-			"text2": [
-				"Naudotojo",
-				"sąsaja"
-			],
-			"desc": "Naudotojo sąsajos nustatymai"
-		},
-		"AdvancedMenu": {
-			"text2": [
-				"Išplėsti.",
-				"nustatymai"
-			],
-			"desc": "Išplėstiniai nustatymai"
-		}
-	},
-	"menuOptions": {
-		"DCInCutoff": {
-			"text2": [
-				"Maitinimo",
-				"šaltinis"
-			],
-			"desc": "Išjungimo įtampa. <DC 10V> arba celių (S) kiekis (3.3V per celę)>"
-		},
-		"SleepTemperature": {
-			"text2": [
-				"Miego",
-				"temperat."
-			],
-			"desc": "Miego temperatūra"
-		},
-		"SleepTimeout": {
-			"text2": [
-				"Miego",
-				"laikas"
-			],
-			"desc": "Užmigimo laikas <sekundės/minutės>"
-		},
-		"ShutdownTimeout": {
-			"text2": [
-				"Išjungimo",
-				"laikas"
-			],
-			"desc": "Išjungimo laikas <minutės>"
-		},
-		"MotionSensitivity": {
-			"text2": [
-				"Judesio",
-				"jautrumas"
-			],
-			"desc": "Judesio jautrumas <0=Išjungta, 1=Mažiausias, 9=Didžiausias>"
-		},
-		"TemperatureUnit": {
-			"text2": [
-				"Temperatūros",
-				"vienetai"
-			],
-			"desc": "Temperatūros vienetai <C=Celsijus, F=Farenheitas>"
-		},
-		"AdvancedIdle": {
-			"text2": [
-				"Detalus lau-",
-				"kimo ekranas"
-			],
-			"desc": "Ar rodyti papildomą informaciją mažesniu šriftu laukimo ekrane"
-		},
-		"DisplayRotation": {
-			"text2": [
-				"Ekrano",
-				"orientacija"
-			],
-			"desc": "Ekrano orientacija <A=Automatinė, K=Kairiarankiams, D=Dešiniarankiams>"
-		},
-		"BoostTemperature": {
-			"text2": [
-				"Turbo",
-				"temperat."
-			],
-			"desc": "Temperatūra turbo režimu"
-		},
-		"AutoStart": {
-			"text2": [
-				"Auto",
-				"paleidimas"
-			],
-			"desc": "Ar pradėti kaitininti iš karto įjungus lituoklį <N=Ne, T=Taip, M=Miegas, K=Miegoti kambario temperatūroje>"
-		},
-		"CooldownBlink": {
-			"text2": [
-				"Atvėsimo",
-				"mirksėjimas"
-			],
-			"desc": "Ar mirksėti temperatūrą ekrane kol vėstantis antgalis vis dar karštas"
-		},
-		"TemperatureCalibration": {
-			"text2": [
-				"Kalibruoti",
-				"temperatūrą?"
-			],
-			"desc": "Antgalio temperatūros kalibravimas"
-		},
-		"SettingsReset": {
-			"text2": [
-				"Atstatyti",
-				"nustatymus?"
-			],
-			"desc": "Nustatyti nustatymus iš naujo"
-		},
-		"VoltageCalibration": {
-			"text2": [
-				"Kalibruoti",
-				"įvesties įtampą?"
-			],
-			"desc": "Įvesties įtampos kalibravimas. Trumpai paspauskite, norėdami nustatyti, ilgai paspauskite, kad išeitumėte"
-		},
-		"AdvancedSoldering": {
-			"text2": [
-				"Detalus lita-",
-				"vimo ekranas"
-			],
-			"desc": "Ar rodyti išsamią informaciją lituojant"
-		},
-		"ScrollingSpeed": {
-			"text2": [
-				"Aprašymo",
-				"greitis"
-			],
-			"desc": "Greitis, kuriuo šis tekstas slenka"
-		},
-		"TipModel": {
-			"text2": [
-				"Antgalio",
-				"modelis"
-			],
-			"desc": "Antgalio modelio pasirinkimas"
-		},
-		"SimpleCalibrationMode": {
-			"text2": [
-				"Paprastas",
-				"kalibravimas"
-			],
-			"desc": "Paprastas kalibravimas naudojant karštą vandienį"
-		},
-		"AdvancedCalibrationMode": {
-			"text2": [
-				"Išplėstinis",
-				"kalibravimas"
-			],
-			"desc": "Išplėstinis kalibravimas naudojant termoelementą"
-		},
-		"QCMaxVoltage": {
-			"text2": [
-				"QC maitinimo",
-				"bloko įtampa"
-			],
-			"desc": "Maksimali QC maitinimo bloko įtampa"
-		},
-		"PowerLimit": {
-			"text2": [
-				"Galios",
-				"riba"
-			],
-			"desc": "Didžiausia galia, kurią gali naudoti lituoklis <Vatai>"
-		},
-		"ReverseButtonTempChange": {
-			"text2": [
-				"Sukeisti + -",
-				"mygtukus?"
-			],
-			"desc": "Sukeisti + - temperatūros keitimo mygtukus vietomis."
-		},
-		"TempChangeShortStep": {
-			"text2": [
-				"Temp. keitimas",
-				"trumpas spust."
-			],
-			"desc": "Temperatūros keitimo žingsnis trumpai spustėlėjus mygtuką!"
-		},
-		"TempChangeLongStep": {
-			"text2": [
-				"Temp. keitimas",
-				"ilgas pasp."
-			],
-			"desc": "Temperatūros keitimo žingsnis ilgai paspaudus mygtuką!"
-		},
-		"PowerPulsePower": {
-			"text2": [
-				"Power",
-				"Pulse W"
-			],
-			"desc": "Keep awake pulse power intensity"
-		},
-		"TipGain": {
-			"text2": [
-				"Modify",
-				"tip gain"
-			],
-			"desc": "Tip gain"
-		},
-		"HallEffSensitivity": {
-			"text2": [
-				"Holo",
-				"jutiklis"
-			],
-			"desc": "Holo jutiklio jautrumas nustatant miegą <I=Išjungtas, Ž=Žemas, V=Vidutinis, A=Aukštas>"
-		},
-		"LockingMode": {
-			"text2": [
-				"Mygtukų",
-				"užraktas"
-			],
-			"desc": "Lituodami, ilgai paspauskite abu mygtukus, kad juos užrakintumėte <I=Išjungta, T=Tik turbo režimas, V=Visiškas užrakinimas>"
-		}
-	}
-}

Translations/translation_nl.json

@@ -1,279 +0,0 @@
-{
-	"languageCode": "NL",
-	"languageLocalName": "Nederlands",
-	"cyrillicGlyphs": false,
-	"messages": {
-		"SettingsCalibrationDone": "Calibratie klaar!",
-		"SettingsCalibrationWarning": "Zorg ervoor dat te punt op kamertemperatuur is voor je verder gaat!",
-		"SettingsResetWarning": "Weet je zeker dat je de fabrieksinstellingen terug wil zetten?",
-		"UVLOWarningString": "DC Laag",
-		"UndervoltageString": "Onderspanning",
-		"InputVoltageString": "Input V: ",
-		"WarningTipTempString": "Punt temp: ",
-		"BadTipString": "DEFECTE PUNT",
-		"SleepingSimpleString": "Zzzz",
-		"SleepingAdvancedString": "Slaapstand...",
-		"WarningSimpleString": "HEET!",
-		"WarningAdvancedString": "!!! PUNT HOT !!!",
-		"SleepingTipAdvancedString": "Punt:",
-		"IdleTipString": "Punt:",
-		"IdleSetString": " Zet:",
-		"TipDisconnectedString": "PUNT LOSGEKOPPELT",
-		"SolderingAdvancedPowerPrompt": "Vermogen: ",
-		"OffString": "Uit",
-		"ResetOKMessage": "Reset OK",
-		"YourGainMessage": "Niveau:",
-		"SettingsResetMessage": "Instellingen zijn\ngereset!",
-		"NoAccelerometerMessage": "No accelerometer\ndetected!",
-		"NoPowerDeliveryMessage": "No USB-PD IC\ndetected!",
-		"LockingKeysString": " GEBLOKKEERD",
-		"UnlockingKeysString": "GEDEBLOKKEERD",
-		"WarningKeysLockedString": "!GEBLOKKEERD!"
-	},
-	"characters": {
-		"SettingRightChar": "R",
-		"SettingLeftChar": "L",
-		"SettingAutoChar": "A",
-		"SettingFastChar": "F",
-		"SettingSlowChar": "S",
-		"SettingStartSolderingChar": "T",
-		"SettingStartSleepChar": "S",
-		"SettingStartSleepOffChar": "O",
-		"SettingStartNoneChar": "F",
-		"SettingLockDisableChar": "U",
-		"SettingLockBoostChar": "B",
-		"SettingLockFullChar": "V",
-		"SettingSensitivityOff": "O",
-		"SettingSensitivityLow": "L",
-		"SettingSensitivityMedium": "M",
-		"SettingSensitivityHigh": "H"
-	},
-	"menuGroups": {
-		"SolderingMenu": {
-			"text2": [
-				"Soldeer",
-				"Instellingen"
-			],
-			"desc": "Soldeer instellingen"
-		},
-		"PowerSavingMenu": {
-			"text2": [
-				"Slaap",
-				"Modes"
-			],
-			"desc": "Stroom besparings instellingen"
-		},
-		"UIMenu": {
-			"text2": [
-				"Gebruikers-",
-				"interface"
-			],
-			"desc": "Gebruikers-interface instellingen"
-		},
-		"AdvancedMenu": {
-			"text2": [
-				"Geavanceerde",
-				"Instellingen"
-			],
-			"desc": "Geavanceerde Instellingen"
-		}
-	},
-	"menuOptions": {
-		"DCInCutoff": {
-			"text2": [
-				"Spannings-",
-				"bron"
-			],
-			"desc": "Spanningsbron. Stelt drempelspanning in. <DC 10V> <S 3.3V per cel>"
-		},
-		"SleepTemperature": {
-			"text2": [
-				"Slaap",
-				"temp"
-			],
-			"desc": "Temperatuur in slaapstand"
-		},
-		"SleepTimeout": {
-			"text2": [
-				"Slaap",
-				"time-out"
-			],
-			"desc": "Slaap time-out <Minuten/Seconden>"
-		},
-		"ShutdownTimeout": {
-			"text2": [
-				"Uitschakel",
-				"time-out"
-			],
-			"desc": "Automatisch afsluiten time-out <Minuten>"
-		},
-		"MotionSensitivity": {
-			"text2": [
-				"Bewegings-",
-				"gevoeligheid"
-			],
-			"desc": "Bewegingsgevoeligheid <0=uit 1=minst gevoelig 9=meest gevoelig>"
-		},
-		"TemperatureUnit": {
-			"text2": [
-				"Temperatuur",
-				"eenheid"
-			],
-			"desc": "Temperatuureenheid <C=Celsius F=Fahrenheit>"
-		},
-		"AdvancedIdle": {
-			"text2": [
-				"Gedetailleerd",
-				"startscherm"
-			],
-			"desc": "Gedetailleerde informatie weergeven in een kleiner lettertype op het startscherm."
-		},
-		"DisplayRotation": {
-			"text2": [
-				"Scherm-",
-				"oriëntatie"
-			],
-			"desc": "Schermoriëntatie <A=Automatisch L=Linkshandig R=Rechtshandig>"
-		},
-		"BoostTemperature": {
-			"text2": [
-				"Boost",
-				"temp"
-			],
-			"desc": "Temperatuur in boostmode"
-		},
-		"AutoStart": {
-			"text2": [
-				"Auto",
-				"start"
-			],
-			"desc": "Breng de soldeerbout direct op temperatuur bij het opstarten. <T=Soldeertemperatuur, S=Slaapstand-temperatuur, F=Uit>"
-		},
-		"CooldownBlink": {
-			"text2": [
-				"Afkoel",
-				"flikker"
-			],
-			"desc": "Temperatuur laten flikkeren in het hoofdmenu als de soldeerpunt aan het afkoelen is."
-		},
-		"TemperatureCalibration": {
-			"text2": [
-				"Calibreer",
-				"temperatuur?"
-			],
-			"desc": "Temperatuursafwijking van de soldeerpunt calibreren."
-		},
-		"SettingsReset": {
-			"text2": [
-				"Instellingen",
-				"resetten?"
-			],
-			"desc": "Alle instellingen terugzetten."
-		},
-		"VoltageCalibration": {
-			"text2": [
-				"Calibreer",
-				"input-voltage?"
-			],
-			"desc": "VIN Calibreren. <druk lang om te sluiten>."
-		},
-		"AdvancedSoldering": {
-			"text2": [
-				"Gedetailleerd",
-				"soldeerscherm"
-			],
-			"desc": "Gedetailleerde informatie weergeven in een kleiner lettertype op het soldeerscherm."
-		},
-		"ScrollingSpeed": {
-			"text2": [
-				"Scroll",
-				"snelheid"
-			],
-			"desc": "Snelheid waarmee de tekst scrolt."
-		},
-		"TipModel": {
-			"text2": [
-				"Punt",
-				"Model"
-			],
-			"desc": "Punt Model selecteren"
-		},
-		"SimpleCalibrationMode": {
-			"text2": [
-				"Simpele",
-				"Calibratie"
-			],
-			"desc": "Simpele Calibratie met warm water"
-		},
-		"AdvancedCalibrationMode": {
-			"text2": [
-				"Geavanceerde",
-				"Calibratie"
-			],
-			"desc": "Geavanceerde calibratie met een thermokoppel op de punt"
-		},
-		"QCMaxVoltage": {
-			"text2": [
-				"Power",
-				"Wattage"
-			],
-			"desc": "Wattage van de gebruikte voeding"
-		},
-		"PowerLimit": {
-			"text2": [
-				"Vermogen",
-				"limiet"
-			],
-			"desc": "Maximaal vermogen <Watts>"
-		},
-		"ReverseButtonTempChange": {
-			"text2": [
-				"Draai",
-				"+ - knoppen om"
-			],
-			"desc": "Keer de +- knoppen om de termperatuur van de punt te regelen om."
-		},
-		"TempChangeShortStep": {
-			"text2": [
-				"Temp veranderen",
-				"kort"
-			],
-			"desc": "Temperatuur verandering bij kort drukken"
-		},
-		"TempChangeLongStep": {
-			"text2": [
-				"Temp veranderen",
-				"lang"
-			],
-			"desc": "Temperatuur verandering bij lang drukken"
-		},
-		"PowerPulsePower": {
-			"text2": [
-				"Vermogen",
-				"Puls W"
-			],
-			"desc": "Vermogen van puls om soldeerbout aan te houden"
-		},
-		"TipGain": {
-			"text2": [
-				"Verander",
-				"punt gain"
-			],
-			"desc": "Punt gain"
-		},
-		"HallEffSensitivity": {
-			"text2": [
-				"Hall Eff",
-				"Sensitivity"
-			],
-			"desc": "Sensitivity of the Hall effect sensor in detecting sleep <O=Off,L=Low,M=Medium,H=High>"
-		},
-		"LockingMode": {
-			"text2": [
-				"Blokkeer",
-				"knoppen"
-			],
-			"desc": "Tijdens solderen lang op beide knoppen drukken, blokkeert ze. <U=Uit, B=Alleen boost, V=Volledig blokkeren>"
-		}
-	}
-}

Translations/translation_nl_be.json

@@ -1,279 +0,0 @@
-{
-	"languageCode": "NL_BE",
-	"languageLocalName": "Vlaams",
-	"cyrillicGlyphs": false,
-	"messages": {
-		"SettingsCalibrationDone": "Gecalibreerd!",
-		"SettingsCalibrationWarning": "Zorg vooraf dat de punt op kamertemperatuur is!",
-		"SettingsResetWarning": "Ben je zeker dat je alle standaardwaarden wil resetten?",
-		"UVLOWarningString": "Voedingsspanning LAAG",
-		"UndervoltageString": "Onderspanning",
-		"InputVoltageString": "Voedingsspanning: ",
-		"WarningTipTempString": "Punt Temp: ",
-		"BadTipString": "DEFECT",
-		"SleepingSimpleString": "Zzz ",
-		"SleepingAdvancedString": "Slaapstand...",
-		"WarningSimpleString": "HEET",
-		"WarningAdvancedString": "!!! PUNT HEET !!!",
-		"SleepingTipAdvancedString": "Punt:",
-		"IdleTipString": "Punt:",
-		"IdleSetString": "Stel in:",
-		"TipDisconnectedString": "Punt ONTKOPPELD",
-		"SolderingAdvancedPowerPrompt": "Vermogen: ",
-		"OffString": "Uit",
-		"ResetOKMessage": "Reset OK",
-		"YourGainMessage": "Your gain:",
-		"SettingsResetMessage": "Settings were\nreset!",
-		"NoAccelerometerMessage": "No accelerometer\ndetected!",
-		"NoPowerDeliveryMessage": "No USB-PD IC\ndetected!",
-		"LockingKeysString": " LOCKED",
-		"UnlockingKeysString": "UNLOCKED",
-		"WarningKeysLockedString": "!LOCKED!"
-	},
-	"characters": {
-		"SettingRightChar": "R",
-		"SettingLeftChar": "L",
-		"SettingAutoChar": "A",
-		"SettingFastChar": "S",
-		"SettingSlowChar": "T",
-		"SettingStartSolderingChar": "T",
-		"SettingStartSleepChar": "S",
-		"SettingStartSleepOffChar": "O",
-		"SettingStartNoneChar": "F",
-		"SettingSensitivityOff": "O",
-		"SettingSensitivityLow": "L",
-		"SettingSensitivityMedium": "M",
-		"SettingSensitivityHigh": "H",
-		"SettingLockDisableChar": "D",
-		"SettingLockBoostChar": "B",
-		"SettingLockFullChar": "F"
-	},
-	"menuGroups": {
-		"SolderingMenu": {
-			"text2": [
-				"Soldeer",
-				"Instellingen"
-			],
-			"desc": "Soldeerinstellingen"
-		},
-		"PowerSavingMenu": {
-			"text2": [
-				"Slaap",
-				"standen"
-			],
-			"desc": "Batterijspaarstanden"
-		},
-		"UIMenu": {
-			"text2": [
-				"Gebruikers-",
-				"Interface"
-			],
-			"desc": "Gebruikersinterface Instellingen"
-		},
-		"AdvancedMenu": {
-			"text2": [
-				"Gevorderde",
-				"Instellingen"
-			],
-			"desc": "Gevorderde Instellingen"
-		}
-	},
-	"menuOptions": {
-		"DCInCutoff": {
-			"text2": [
-				"Spannings-",
-				"bron"
-			],
-			"desc": "Spanningsbron. Stelt minimumspanning in. <DC 10V> <S 3.3V per cel>"
-		},
-		"SleepTemperature": {
-			"text2": [
-				"Slaap",
-				"temp"
-			],
-			"desc": "Temperatuur in slaapstand <°C>"
-		},
-		"SleepTimeout": {
-			"text2": [
-				"Slaap",
-				"time-out"
-			],
-			"desc": "Slaapstand time-out <Minuten/Seconden>"
-		},
-		"ShutdownTimeout": {
-			"text2": [
-				"Uitschakel",
-				"time-out"
-			],
-			"desc": "Automatisch afsluiten time-out <Minuten>"
-		},
-		"MotionSensitivity": {
-			"text2": [
-				"Bewegings-",
-				"gevoeligheid"
-			],
-			"desc": "Bewegingsgevoeligheid <0.uit 1.minst gevoelig 9.meest gevoelig>"
-		},
-		"TemperatureUnit": {
-			"text2": [
-				"Temperatuur",
-				"schaal"
-			],
-			"desc": "Temperatuurschaal <°C=Celsius °F=Fahrenheit>"
-		},
-		"AdvancedIdle": {
-			"text2": [
-				"Gedetailleerd",
-				"slaapscherm"
-			],
-			"desc": "Gedetailleerde informatie in een kleiner lettertype in het slaapscherm."
-		},
-		"DisplayRotation": {
-			"text2": [
-				"Scherm-",
-				"oriëntatie"
-			],
-			"desc": "Schermoriëntatie <A. Automatisch L. Linkshandig R. Rechtshandig>"
-		},
-		"BoostTemperature": {
-			"text2": [
-				"Verhogings",
-				"temp"
-			],
-			"desc": "Verhogingstemperatuur"
-		},
-		"AutoStart": {
-			"text2": [
-				"Auto",
-				"start"
-			],
-			"desc": "Breng de soldeerbout op temperatuur bij het opstarten. T=Soldeertemperatuur, S=Slaapstand-temperatuur, F=Uit"
-		},
-		"CooldownBlink": {
-			"text2": [
-				"Afkoel",
-				"knipper"
-			],
-			"desc": "Temperatuur knippert in hoofdmenu tijdens afkoeling."
-		},
-		"TemperatureCalibration": {
-			"text2": [
-				"Calibreer",
-				"temperatuur?"
-			],
-			"desc": "Temperatuur van de punt calibreren."
-		},
-		"SettingsReset": {
-			"text2": [
-				"Instellingen",
-				"resetten?"
-			],
-			"desc": "Alle instellingen resetten."
-		},
-		"VoltageCalibration": {
-			"text2": [
-				"Calibreer",
-				"voedingsspanning?"
-			],
-			"desc": "VIN Calibreren. Bevestigen door knoppen lang in te drukken."
-		},
-		"AdvancedSoldering": {
-			"text2": [
-				"Gedetailleerd",
-				"soldeerscherm"
-			],
-			"desc": "Gedetailleerde informatie in kleiner lettertype in soldeerscherm."
-		},
-		"ScrollingSpeed": {
-			"text2": [
-				"Scrol",
-				"snelheid"
-			],
-			"desc": "Scrolsnelheid van de tekst."
-		},
-		"TipModel": {
-			"text2": [
-				"Punt",
-				"Model"
-			],
-			"desc": "Gekozen punt"
-		},
-		"SimpleCalibrationMode": {
-			"text2": [
-				"Eenvoudige",
-				"Calibrering"
-			],
-			"desc": "Calibrering met heet water"
-		},
-		"AdvancedCalibrationMode": {
-			"text2": [
-				"Gevorderde",
-				"Calibrering"
-			],
-			"desc": "Calibrering met thermokoppel"
-		},
-		"QCMaxVoltage": {
-			"text2": [
-				"Vermogen",
-				"Watt"
-			],
-			"desc": "Vermogen van de adapter"
-		},
-		"PowerLimit": {
-			"text2": [
-				"Power",
-				"Limit"
-			],
-			"desc": "Maximum power the iron can use <Watts>"
-		},
-		"ReverseButtonTempChange": {
-			"text2": [
-				"Key +-",
-				"reverse?"
-			],
-			"desc": "Reverse the tip temperature change buttons plus minus assignment."
-		},
-		"TempChangeShortStep": {
-			"text2": [
-				"Temp change",
-				"short?"
-			],
-			"desc": "Temperature change steps on short button press!"
-		},
-		"TempChangeLongStep": {
-			"text2": [
-				"Temp change",
-				"long?"
-			],
-			"desc": "Temperature change steps on long button press!"
-		},
-		"PowerPulsePower": {
-			"text2": [
-				"Power",
-				"Pulse W"
-			],
-			"desc": "Keep awake pulse power intensity"
-		},
-		"TipGain": {
-			"text2": [
-				"Modify",
-				"tip gain"
-			],
-			"desc": "Tip gain"
-		},
-		"HallEffSensitivity": {
-			"text2": [
-				"Hall Eff",
-				"Sensitivity"
-			],
-			"desc": "Sensitivity of the Hall effect sensor in detecting sleep <O=Off,L=Low,M=Medium,H=High>"
-		},
-		"LockingMode": {
-			"text2": [
-				"Allow buttons",
-				"locking"
-			],
-			"desc": "When soldering, long press on both buttons lock them <D=Disable, B=Boost only, F=Full locking>"
-		}
-	}
-}

Translations/translation_no.json

@@ -1,279 +0,0 @@
-{
-	"languageCode": "NO",
-	"languageLocalName": "Norsk",
-	"cyrillicGlyphs": false,
-	"messages": {
-		"SettingsCalibrationDone": "Calibration done!",
-		"SettingsCalibrationWarning": "Sørg for at loddespissen har romtemperatur før du fortsetter!",
-		"SettingsResetWarning": "Er du sikker på at du vil tilbakestille til standardinnstillinger?",
-		"UVLOWarningString": "Lavspenn",
-		"UndervoltageString": "Underspenning",
-		"InputVoltageString": "Innspenn.: ",
-		"WarningTipTempString": "Spisstemp: ",
-		"BadTipString": "BAD TIP",
-		"SleepingSimpleString": "Zzzz",
-		"SleepingAdvancedString": "Dvale...",
-		"WarningSimpleString": "Varm",
-		"WarningAdvancedString": "VARM SPISS!",
-		"SleepingTipAdvancedString": "Spiss:",
-		"IdleTipString": "Spiss:",
-		"IdleSetString": "Set:",
-		"TipDisconnectedString": "SPISS FRAKOBLET",
-		"SolderingAdvancedPowerPrompt": "Effekt: ",
-		"OffString": "Av",
-		"ResetOKMessage": "Reset OK",
-		"YourGainMessage": "Your gain:",
-		"SettingsResetMessage": "Settings were\nreset!",
-		"NoAccelerometerMessage": "No accelerometer\ndetected!",
-		"NoPowerDeliveryMessage": "No USB-PD IC\ndetected!",
-		"LockingKeysString": " LOCKED",
-		"UnlockingKeysString": "UNLOCKED",
-		"WarningKeysLockedString": "!LOCKED!"
-	},
-	"characters": {
-		"SettingRightChar": "H",
-		"SettingLeftChar": "V",
-		"SettingAutoChar": "A",
-		"SettingFastChar": "H",
-		"SettingSlowChar": "L",
-		"SettingStartSolderingChar": "L",
-		"SettingStartSleepChar": "D",
-		"SettingStartSleepOffChar": "O",
-		"SettingStartNoneChar": "I",
-		"SettingSensitivityOff": "O",
-		"SettingSensitivityLow": "L",
-		"SettingSensitivityMedium": "M",
-		"SettingSensitivityHigh": "H",
-		"SettingLockDisableChar": "D",
-		"SettingLockBoostChar": "B",
-		"SettingLockFullChar": "F"
-	},
-	"menuGroups": {
-		"SolderingMenu": {
-			"text2": [
-				"Lodde-",
-				"innst."
-			],
-			"desc": "Loddeinnstillinger"
-		},
-		"PowerSavingMenu": {
-			"text2": [
-				"Dvale-",
-				"innst."
-			],
-			"desc": "Dvaleinnstillinger"
-		},
-		"UIMenu": {
-			"text2": [
-				"Bruker-",
-				"grensesn."
-			],
-			"desc": "Brukergrensesnitt-innstillinger"
-		},
-		"AdvancedMenu": {
-			"text2": [
-				"Avanserte",
-				"valg"
-			],
-			"desc": "Avanserte valg"
-		}
-	},
-	"menuOptions": {
-		"DCInCutoff": {
-			"text2": [
-				"Kilde",
-				""
-			],
-			"desc": "Strømforsyning. Sett nedre spenning for automatisk nedstenging. <DC 10V <S 3.3V per celle"
-		},
-		"SleepTemperature": {
-			"text2": [
-				"DTmp",
-				""
-			],
-			"desc": "Dvaletemperatur <C>"
-		},
-		"SleepTimeout": {
-			"text2": [
-				"",
-				""
-			],
-			"desc": "Tid før dvale <Minutter/Sekunder"
-		},
-		"ShutdownTimeout": {
-			"text2": [
-				"AvTid",
-				""
-			],
-			"desc": "Tid før automatisk nedstenging <Minutter"
-		},
-		"MotionSensitivity": {
-			"text2": [
-				"BSensr",
-				""
-			],
-			"desc": "Bevegelsesfølsomhet <0.Inaktiv 1.Minst følsom 9.Mest følsom"
-		},
-		"TemperatureUnit": {
-			"text2": [
-				"TmpEnh",
-				""
-			],
-			"desc": "Temperaturskala <C=Celsius F=Fahrenheit"
-		},
-		"AdvancedIdle": {
-			"text2": [
-				"AvDvSk",
-				""
-			],
-			"desc": "Vis detaljert informasjon med liten skrift på dvaleskjermen."
-		},
-		"DisplayRotation": {
-			"text2": [
-				"SkRetn",
-				""
-			],
-			"desc": "Skjermretning <A. Automatisk V. Venstrehendt H. Høyrehendt"
-		},
-		"BoostTemperature": {
-			"text2": [
-				"KTmp",
-				""
-			],
-			"desc": "Temperatur i \"kraft\"-modus"
-		},
-		"AutoStart": {
-			"text2": [
-				"AStart",
-				""
-			],
-			"desc": "Start automatisk med lodding når strøm kobles til. L=Lodding, D=Dvale, I=Inaktiv"
-		},
-		"CooldownBlink": {
-			"text2": [
-				"KjBlnk",
-				""
-			],
-			"desc": "Blink temperaturen på skjermen mens spissen fortsatt er varm."
-		},
-		"TemperatureCalibration": {
-			"text2": [
-				"TempKal?",
-				""
-			],
-			"desc": "Kalibrer spiss-temperatur."
-		},
-		"SettingsReset": {
-			"text2": [
-				"TilbStl?",
-				""
-			],
-			"desc": "Tilbakestill alle innstillinger"
-		},
-		"VoltageCalibration": {
-			"text2": [
-				"KalSpIn?",
-				""
-			],
-			"desc": "Kalibrer spenning. Knappene justerer. Langt trykk for å gå ut"
-		},
-		"AdvancedSoldering": {
-			"text2": [
-				"AvLdSk",
-				""
-			],
-			"desc": "Vis detaljert informasjon ved lodding"
-		},
-		"ScrollingSpeed": {
-			"text2": [
-				"RullHa",
-				""
-			],
-			"desc": "Hastigheten på rulletekst"
-		},
-		"TipModel": {
-			"text2": [
-				"Tip",
-				"Model"
-			],
-			"desc": "Tip Model selection"
-		},
-		"SimpleCalibrationMode": {
-			"text2": [
-				"Simple",
-				"Calibration"
-			],
-			"desc": "Simple Calibration using Hot water"
-		},
-		"AdvancedCalibrationMode": {
-			"text2": [
-				"Advanced",
-				"Calibration"
-			],
-			"desc": "Advanced calibration using thermocouple on the tip"
-		},
-		"QCMaxVoltage": {
-			"text2": [
-				"Power",
-				"Wattage"
-			],
-			"desc": "Power Wattage of the power adapter used"
-		},
-		"PowerLimit": {
-			"text2": [
-				"Power",
-				"Limit"
-			],
-			"desc": "Maximum power the iron can use <Watts>"
-		},
-		"ReverseButtonTempChange": {
-			"text2": [
-				"Key +-",
-				"reverse?"
-			],
-			"desc": "Reverse the tip temperature change buttons plus minus assignment."
-		},
-		"TempChangeShortStep": {
-			"text2": [
-				"Temp change",
-				"short?"
-			],
-			"desc": "Temperature change steps on short button press!"
-		},
-		"TempChangeLongStep": {
-			"text2": [
-				"Temp change",
-				"long?"
-			],
-			"desc": "Temperature change steps on long button press!"
-		},
-		"PowerPulsePower": {
-			"text2": [
-				"Power",
-				"Pulse W"
-			],
-			"desc": "Keep awake pulse power intensity"
-		},
-		"TipGain": {
-			"text2": [
-				"Modify",
-				"tip gain"
-			],
-			"desc": "Tip gain"
-		},
-		"HallEffSensitivity": {
-			"text2": [
-				"Hall Eff",
-				"Sensitivity"
-			],
-			"desc": "Sensitivity of the Hall effect sensor in detecting sleep <O=Off,L=Low,M=Medium,H=High>"
-		},
-		"LockingMode": {
-			"text2": [
-				"Allow buttons",
-				"locking"
-			],
-			"desc": "When soldering, long press on both buttons lock them <D=Disable, B=Boost only, F=Full locking>"
-		}
-	}
-}

Translations/translation_pl.json

@@ -1,280 +0,0 @@
-{
-	"languageCode": "PL",
-	"languageLocalName": "Polski",
-	"cyrillicGlyphs": false,
-	"tempUnitFahrenheit": false,
-	"messages": {
-		"SettingsCalibrationDone": "Kalibracja udana!",
-		"SettingsCalibrationWarning": "Przed kontynuowaniem upewnij się, że końcówka osiągnęła temperaturę pokojową!",
-		"SettingsResetWarning": "Czy na pewno chcesz przywrócić ustawienia fabryczne?",
-		"UVLOWarningString": "NIS. NAP",
-		"UndervoltageString": "Zbyt niskie nap.",
-		"InputVoltageString": "Nap. wej.:",
-		"WarningTipTempString": "Temp. grotu:",
-		"BadTipString": "ZŁY GROT",
-		"SleepingSimpleString": "Zzz!",
-		"SleepingAdvancedString": "Tr. uśpienia",
-		"WarningSimpleString": "HOT!",
-		"WarningAdvancedString": "GORĄCA KOŃCÓWKA!",
-		"SleepingTipAdvancedString": "Grot:",
-		"IdleTipString": "Grot:",
-		"IdleSetString": " Ust:",
-		"TipDisconnectedString": "GROT ODŁĄCZONY",
-		"SolderingAdvancedPowerPrompt": "Moc: ",
-		"OffString": "Wył",
-		"ResetOKMessage": "Reset OK",
-		"YourGainMessage": "Us.zysk:",
-		"SettingsResetMessage": "Ust. zresetowane",
-		"NoAccelerometerMessage": "No accelerometer\ndetected!",
-		"NoPowerDeliveryMessage": "No USB-PD IC\ndetected!",
-		"LockingKeysString": " ZABLOK.",
-		"UnlockingKeysString": "ODBLOK.",
-		"WarningKeysLockedString": "!ZABLOK!"
-	},
-	"characters": {
-		"SettingRightChar": "P",
-		"SettingLeftChar": "L",
-		"SettingAutoChar": "A",
-		"SettingFastChar": "S",
-		"SettingSlowChar": "W",
-		"SettingStartSolderingChar": "T",
-		"SettingStartSleepChar": "Z",
-		"SettingStartSleepOffChar": "O",
-		"SettingStartNoneChar": "B",
-		"SettingSensitivityOff": "O",
-		"SettingSensitivityLow": "N",
-		"SettingSensitivityMedium": "Ś",
-		"SettingSensitivityHigh": "W",
-		"SettingLockDisableChar": "W",
-		"SettingLockBoostChar": "B",
-		"SettingLockFullChar": "P"
-	},
-	"menuGroups": {
-		"SolderingMenu": {
-			"text2": [
-				"Lutowanie",
-				""
-			],
-			"desc": "Ustawienia trybu lutowania"
-		},
-		"PowerSavingMenu": {
-			"text2": [
-				"Oszcz.",
-				"energii"
-			],
-			"desc": "Ustawienia oszczędzania energii"
-		},
-		"UIMenu": {
-			"text2": [
-				"Interfejs",
-				"użytkownika"
-			],
-			"desc": "Ustawienia interfejsu użytkownika"
-		},
-		"AdvancedMenu": {
-			"text2": [
-				"Ustawienia",
-				"zaawans."
-			],
-			"desc": "Ustawienia zaawansowane"
-		}
-	},
-	"menuOptions": {
-		"DCInCutoff": {
-			"text2": [
-				"Źródło",
-				"zasilania"
-			],
-			"desc": "Źródło zasilania. Ustaw napięcie odcięcia. <DC 10V> <S 3.3V dla ogniw Li, wyłącz limit mocy>"
-		},
-		"SleepTemperature": {
-			"text2": [
-				"Temp.",
-				"uśpienia"
-			],
-			"desc": "Temperatura w trybie uśpienia <°C>"
-		},
-		"SleepTimeout": {
-			"text2": [
-				"Czas do",
-				"uśpienia"
-			],
-			"desc": "Czas do przejścia w tryb uśpienia <minuty/sekundy>"
-		},
-		"ShutdownTimeout": {
-			"text2": [
-				"Czas do",
-				"wyłączenia"
-			],
-			"desc": "Czas do wyłączenia <minuty>"
-		},
-		"MotionSensitivity": {
-			"text2": [
-				"Czułość",
-				"wykr. ruchu"
-			],
-			"desc": "Czułość wykrywania ruchu <0-Wyłączona, 1-Minimalna, 9-Maksymalna>"
-		},
-		"TemperatureUnit": {
-			"text2": [
-				"Jednostka",
-				"temperatury"
-			],
-			"desc": "Jednostka temperatury <C-Celciusz, F-Fahrenheit>"
-		},
-		"AdvancedIdle": {
-			"text2": [
-				"Szeczegółowy",
-				"ekran bezczy."
-			],
-			"desc": "Wyświetla szczegółowe informacje za pomocą mniejszej czcionki na ekranie bezczynności"
-		},
-		"DisplayRotation": {
-			"text2": [
-				"Obrót",
-				"ekranu"
-			],
-			"desc": "Obrót ekranu <A-automatycznie, L-dla leworęcznych, P-dla praworęcznych>"
-		},
-		"BoostTemperature": {
-			"text2": [
-				"Temp.",
-				"boost"
-			],
-			"desc": "Temperatura w trybie \"boost\" "
-		},
-		"AutoStart": {
-			"text2": [
-				"Aut. uruch.",
-				"tr. lutowania"
-			],
-			"desc": "Automatyczne uruchamianie trybu lutowania po włączeniu zasilania.<B - wyłączone, T - lutowanie, Z - uśpienie, O - uśpienie w temp. pokojowej"
-		},
-		"CooldownBlink": {
-			"text2": [
-				"Mig. podczas",
-				"wychładzania"
-			],
-			"desc": "Temperatura miga podczas wychładzania, gdy grot jest wciąż gorący"
-		},
-		"TemperatureCalibration": {
-			"text2": [
-				"Kalibracja",
-				"temp. grotu"
-			],
-			"desc": "Kalibracja temperatury grotu lutownicy"
-		},
-		"SettingsReset": {
-			"text2": [
-				"Ustawienia",
-				"fabryczne"
-			],
-			"desc": "Resetuje wszystkie ustawienia"
-		},
-		"VoltageCalibration": {
-			"text2": [
-				"Kalibracja",
-				"napięcia"
-			],
-			"desc": "Kalibracja napięcia wejściowego. Krótkie naciśnięcie, aby ustawić, długie naciśnięcie, aby wyjść."
-		},
-		"AdvancedSoldering": {
-			"text2": [
-				"Sz. inf. w",
-				"tr. lutowania"
-			],
-			"desc": "Wyświetl szczegółowe informacje w trybie lutowania"
-		},
-		"ScrollingSpeed": {
-			"text2": [
-				"Sz. przew.",
-				"tekstu"
-			],
-			"desc": "Szybkość przewijania tekstu"
-		},
-		"TipModel": {
-			"text2": [
-				"Model",
-				"grotu"
-			],
-			"desc": "Wybór modelu grotu"
-		},
-		"SimpleCalibrationMode": {
-			"text2": [
-				"Prosta",
-				"kalibracja"
-			],
-			"desc": "Prosta kalibracja, używając gorącej wody"
-		},
-		"AdvancedCalibrationMode": {
-			"text2": [
-				"Zaawansowana",
-				"kalibracja"
-			],
-			"desc": "Zaawansowana kalibracja za pomocą termopary na grocie"
-		},
-		"QCMaxVoltage": {
-			"text2": [
-				"Moc",
-				"w W"
-			],
-			"desc": "Moc używanego zasilacza w <W>"
-		},
-		"PowerLimit": {
-			"text2": [
-				"Ogr.",
-				"mocy"
-			],
-			"desc": "Maksymalna moc <W>, jakiej może użyć lutownica"
-		},
-		"ReverseButtonTempChange": {
-			"text2": [
-				"Zamień przyc.",
-				"+ -"
-			],
-			"desc": "Zamienia działanie przycisków zmiany temperatury grotu"
-		},
-		"TempChangeShortStep": {
-			"text2": [
-				"Zm. temp.",
-				"kr. przyc."
-			],
-			"desc": "Wartość zmiany temperatury, po krótkim przyciśnięciu <°C>"
-		},
-		"TempChangeLongStep": {
-			"text2": [
-				"Zm. temp.",
-				"dł. przyc."
-			],
-			"desc": "Wartość zmiany temperatury, po długim przyciśnięciu <°C>"
-		},
-		"PowerPulsePower": {
-			"text2": [
-				"Moc",
-				"impulsu"
-			],
-			"desc": "W przypadku używania powerbanku, utrzymuj moc na poziomie <W> aby nie uśpić powerbanku"
-		},
-		"TipGain": {
-			"text2": [
-				"Zm. zysk",
-				"grotu"
-			],
-			"desc": "Własne ustawienia zysku grotu, celem lepszej kalibracji wysokich temperatur <uV/°C>"
-		},
-		"HallEffSensitivity": {
-			"text2": [
-				"Czułość",
-				"cz.Halla"
-			],
-			"desc": "Czułość czujnika Halla, używanego do przechodznia w tryb uśpienia <O-Wył,N-Niska,Ś=Średnia,W=Wysoka>"
-		},
-		"LockingMode": {
-			"text2": [
-				"Blokada",
-				"przycisków"
-			],
-			"desc": "W trybie lutowania, wciśnij oba przyciski aby je zablokować <O-Wyłączona, B-tylko Boost, P-pełna blokada>"
-		}
-	}
-}

Translations/translation_pt.json

@@ -1,279 +0,0 @@
-{
-	"languageCode": "PT",
-	"languageLocalName": "Português",
-	"cyrillicGlyphs": false,
-	"messages": {
-		"SettingsCalibrationDone": "Calibração terminada!",
-		"SettingsCalibrationWarning": "A ponta deve estar à temperatura ambiente antes de continuar!",
-		"SettingsResetWarning": "Definições de fábrica?",
-		"UVLOWarningString": "DC BAIXO",
-		"UndervoltageString": "Subtensão",
-		"InputVoltageString": "Tensão ",
-		"WarningTipTempString": "Temperatura ",
-		"BadTipString": "ER PONTA",
-		"SleepingSimpleString": "Zzzz",
-		"SleepingAdvancedString": "Repouso...",
-		"WarningSimpleString": "TEMP",
-		"WarningAdvancedString": "TEMP ELEVADA!",
-		"SleepingTipAdvancedString": "Ponta:",
-		"IdleTipString": "Ponta:",
-		"IdleSetString": " Aj:",
-		"TipDisconnectedString": "SEM PONTA",
-		"SolderingAdvancedPowerPrompt": "Power: ",
-		"OffString": "Off",
-		"ResetOKMessage": "Reset OK",
-		"YourGainMessage": "Your gain:",
-		"SettingsResetMessage": "Settings were\nreset!",
-		"NoAccelerometerMessage": "No accelerometer\ndetected!",
-		"NoPowerDeliveryMessage": "No USB-PD IC\ndetected!",
-		"LockingKeysString": " LOCKED",
-		"UnlockingKeysString": "UNLOCKED",
-		"WarningKeysLockedString": "!LOCKED!"
-	},
-	"characters": {
-		"SettingRightChar": "D",
-		"SettingLeftChar": "C",
-		"SettingAutoChar": "A",
-		"SettingFastChar": "R",
-		"SettingSlowChar": "L",
-		"SettingStartSolderingChar": "T",
-		"SettingStartSleepChar": "S",
-		"SettingStartSleepOffChar": "O",
-		"SettingStartNoneChar": "F",
-		"SettingSensitivityOff": "O",
-		"SettingSensitivityLow": "L",
-		"SettingSensitivityMedium": "M",
-		"SettingSensitivityHigh": "H",
-		"SettingLockDisableChar": "D",
-		"SettingLockBoostChar": "B",
-		"SettingLockFullChar": "F"
-	},
-	"menuGroups": {
-		"SolderingMenu": {
-			"text2": [
-				"Configurações",
-				"Solda"
-			],
-			"desc": "Configurações de soldagem"
-		},
-		"PowerSavingMenu": {
-			"text2": [
-				"Modos",
-				"Repouso"
-			],
-			"desc": "Configurações de economia de energia"
-		},
-		"UIMenu": {
-			"text2": [
-				"Interface",
-				"Utilizador"
-			],
-			"desc": "Configurações do interface do utilizador"
-		},
-		"AdvancedMenu": {
-			"text2": [
-				"Menu",
-				"Avançado"
-			],
-			"desc": "Opções avançadas"
-		}
-	},
-	"menuOptions": {
-		"DCInCutoff": {
-			"text2": [
-				"Fonte",
-				"alimentação"
-			],
-			"desc": "Fonte de alimentação. Define a tensão de corte. <DC=10V> <S=3.3V/célula>"
-		},
-		"SleepTemperature": {
-			"text2": [
-				"Temperat.",
-				"repouso"
-			],
-			"desc": "Temperatura de repouso <C>"
-		},
-		"SleepTimeout": {
-			"text2": [
-				"Tempo",
-				"repouso"
-			],
-			"desc": "Tempo para repouso <Minutos/Segundos>"
-		},
-		"ShutdownTimeout": {
-			"text2": [
-				"Tempo",
-				"desligam."
-			],
-			"desc": "Tempo para desligamento <Minutos>"
-		},
-		"MotionSensitivity": {
-			"text2": [
-				"Sensibilidade",
-				"movimento"
-			],
-			"desc": "Sensibilidade ao movimento <0=Desligado 1=Menor 9=Maior>"
-		},
-		"TemperatureUnit": {
-			"text2": [
-				"Unidade",
-				"temperatura"
-			],
-			"desc": "Unidade de temperatura <C=Celsius F=Fahrenheit>"
-		},
-		"AdvancedIdle": {
-			"text2": [
-				"Tela repouso",
-				"avançada"
-			],
-			"desc": "Exibe informações avançadas quando em espera"
-		},
-		"DisplayRotation": {
-			"text2": [
-				"Orientação",
-				"tela"
-			],
-			"desc": "Orientação da tela <A.utomática C.anhoto D.estro>"
-		},
-		"BoostTemperature": {
-			"text2": [
-				"Modo turbo",
-				"temperat."
-			],
-			"desc": "Ajuste de temperatura do modo \"turbo\""
-		},
-		"AutoStart": {
-			"text2": [
-				"Partida",
-				"automática"
-			],
-			"desc": "Aquece a ponta automaticamente ao ligar"
-		},
-		"CooldownBlink": {
-			"text2": [
-				"Piscar ao",
-				"arrefecer"
-			],
-			"desc": "Faz o valor da temperatura piscar durante o arrefecimento"
-		},
-		"TemperatureCalibration": {
-			"text2": [
-				"Calibrar",
-				"temperatura"
-			],
-			"desc": "Calibra a temperatura"
-		},
-		"SettingsReset": {
-			"text2": [
-				"Reset de",
-				"fábrica?"
-			],
-			"desc": "Reverte todos ajustes"
-		},
-		"VoltageCalibration": {
-			"text2": [
-				"Calibrar",
-				"tensão"
-			],
-			"desc": "Calibra a tensão de alimentação. Use os botões para ajustar o valor. Mantenha pressionado para sair"
-		},
-		"AdvancedSoldering": {
-			"text2": [
-				"Tela trabalho",
-				"avançada"
-			],
-			"desc": "Exibe informações avançadas durante o uso"
-		},
-		"ScrollingSpeed": {
-			"text2": [
-				"Velocidade",
-				"texto ajuda"
-			],
-			"desc": "Velocidade a que o texto é exibido"
-		},
-		"TipModel": {
-			"text2": [
-				"Ponta",
-				"Modelo"
-			],
-			"desc": "Selecção de modelo de ponta"
-		},
-		"SimpleCalibrationMode": {
-			"text2": [
-				"Calibração",
-				"Simples"
-			],
-			"desc": "Calibração simples com água quente"
-		},
-		"AdvancedCalibrationMode": {
-			"text2": [
-				"Calibração",
-				"Avançada"
-			],
-			"desc": "Calibração avançada com um termopar na ponta"
-		},
-		"QCMaxVoltage": {
-			"text2": [
-				"Potência",
-				"Fonte"
-			],
-			"desc": "Potência da fonte usada (Watt)"
-		},
-		"PowerLimit": {
-			"text2": [
-				"Power",
-				"Limit"
-			],
-			"desc": "Maximum power the iron can use <Watts>"
-		},
-		"ReverseButtonTempChange": {
-			"text2": [
-				"Key +-",
-				"reverse?"
-			],
-			"desc": "Reverse the tip temperature change buttons plus minus assignment."
-		},
-		"TempChangeShortStep": {
-			"text2": [
-				"Temp change",
-				"short?"
-			],
-			"desc": "Temperature change steps on short button press!"
-		},
-		"TempChangeLongStep": {
-			"text2": [
-				"Temp change",
-				"long?"
-			],
-			"desc": "Temperature change steps on long button press!"
-		},
-		"PowerPulsePower": {
-			"text2": [
-				"Power",
-				"Pulse W"
-			],
-			"desc": "Keep awake pulse power intensity"
-		},
-		"TipGain": {
-			"text2": [
-				"Modify",
-				"tip gain"
-			],
-			"desc": "Tip gain"
-		},
-		"HallEffSensitivity": {
-			"text2": [
-				"Hall Eff",
-				"Sensitivity"
-			],
-			"desc": "Sensitivity of the Hall effect sensor in detecting sleep <O=Off,L=Low,M=Medium,H=High>"
-		},
-		"LockingMode": {
-			"text2": [
-				"Allow buttons",
-				"locking"
-			],
-			"desc": "When soldering, long press on both buttons lock them <D=Disable, B=Boost only, F=Full locking>"
-		}
-	}
-}

Translations/translation_ru.json

@@ -1,279 +0,0 @@
-{
-	"languageCode": "RU",
-	"languageLocalName": "Русский",
-	"cyrillicGlyphs": true,
-	"messages": {
-		"SettingsCalibrationDone": "Калибровка завершена!",
-		"SettingsCalibrationWarning": "Прежде чем продолжить, пожалуйста, убедитесь, что жало имеет комнатную температуру!",
-		"SettingsResetWarning": "Вы уверены, что хотите сбросить настройки к значениям по умолчанию?",
-		"UVLOWarningString": "НАПРЯЖ--",
-		"UndervoltageString": "Низк. напряжение",
-		"InputVoltageString": "Питание В: ",
-		"WarningTipTempString": "Темп. жала: ",
-		"BadTipString": "ЖАЛО--",
-		"SleepingSimpleString": "Zzzz",
-		"SleepingAdvancedString": "Ожидание...",
-		"WarningSimpleString": "ГОРЯЧО!",
-		"WarningAdvancedString": "!!! ГОРЯЧЕЕ ЖАЛО !!!",
-		"SleepingTipAdvancedString": "Жало:",
-		"IdleTipString": "Жало:",
-		"IdleSetString": " ->",
-		"TipDisconnectedString": "ЖАЛО ОТСОЕДИНЕНО",
-		"SolderingAdvancedPowerPrompt": "Питание: ",
-		"OffString": "Выкл.",
-		"ResetOKMessage": "Сброс OK",
-		"YourGainMessage": "Прирост:",
-		"SettingsResetMessage": "Настройки сброшены!",
-		"NoAccelerometerMessage": "No accelerometer\ndetected!",
-		"NoPowerDeliveryMessage": "No USB-PD IC\ndetected!",
-		"LockingKeysString": " LOCKED",
-		"UnlockingKeysString": "UNLOCKED",
-		"WarningKeysLockedString": "!LOCKED!"
-	},
-	"characters": {
-		"SettingRightChar": "П",
-		"SettingLeftChar": "Л",
-		"SettingAutoChar": "А",
-		"SettingFastChar": "Б",
-		"SettingSlowChar": "М",
-		"SettingStartSolderingChar": "П",
-		"SettingStartSleepChar": "О",
-		"SettingStartSleepOffChar": "К",
-		"SettingStartNoneChar": "В",
-		"SettingSensitivityOff": "O",
-		"SettingSensitivityLow": "L",
-		"SettingSensitivityMedium": "M",
-		"SettingSensitivityHigh": "H",
-		"SettingLockDisableChar": "D",
-		"SettingLockBoostChar": "B",
-		"SettingLockFullChar": "F"
-	},
-	"menuGroups": {
-		"SolderingMenu": {
-			"text2": [
-				"Параметры",
-				"пайки"
-			],
-			"desc": "Параметры пайки"
-		},
-		"PowerSavingMenu": {
-			"text2": [
-				"Режимы",
-				"сна"
-			],
-			"desc": "Настройки режима ожидания"
-		},
-		"UIMenu": {
-			"text2": [
-				"Параметры",
-				"интерфейса"
-			],
-			"desc": "Настройки пользовательского интерфейса"
-		},
-		"AdvancedMenu": {
-			"text2": [
-				"Дополнител.",
-				"настройки"
-			],
-			"desc": "Дополнительные настройки"
-		}
-	},
-	"menuOptions": {
-		"DCInCutoff": {
-			"text2": [
-				"Источник",
-				"питания"
-			],
-			"desc": "Источник питания. Устанавливает напряжение отсечки. <DC 10В> <S 3.3В на ячейку, без лимита мощности>"
-		},
-		"SleepTemperature": {
-			"text2": [
-				"Темп.",
-				"ожидания"
-			],
-			"desc": "Температура режима ожидания"
-		},
-		"SleepTimeout": {
-			"text2": [
-				"Таймаут",
-				"ожидания"
-			],
-			"desc": "Время до перехода в режим ожидания <Минуты/Секунды>"
-		},
-		"ShutdownTimeout": {
-			"text2": [
-				"Таймаут",
-				"выключения"
-			],
-			"desc": "Время до отключения паяльника <Минуты>"
-		},
-		"MotionSensitivity": {
-			"text2": [
-				"Чувствительн.",
-				"акселерометра"
-			],
-			"desc": "Чувствительность акселерометра <0=Выкл., 1=Мин., 9=Макс.>"
-		},
-		"TemperatureUnit": {
-			"text2": [
-				"Единицы",
-				"температуры"
-			],
-			"desc": "Единицы измерения температуры <C=Цельcия, F=Фаренгейта>"
-		},
-		"AdvancedIdle": {
-			"text2": [
-				"Подробный",
-				"реж. ожидания"
-			],
-			"desc": "Отображать детальную информацию уменьшенным шрифтом на экране ожидания"
-		},
-		"DisplayRotation": {
-			"text2": [
-				"Ориентация",
-				"экрана"
-			],
-			"desc": "Ориентация экрана <А=Авто, Л=Левая рука, П=Правая рука>"
-		},
-		"BoostTemperature": {
-			"text2": [
-				"t° турбо",
-				"режима"
-			],
-			"desc": "Температура жала в турбо-режиме"
-		},
-		"AutoStart": {
-			"text2": [
-				"Авто",
-				"старт"
-			],
-			"desc": "Режим, в котором запускается паяльник при подаче питания <П=Пайка, О=Ожидание, К=Ожидание при комн. темп., В=Выкл.>"
-		},
-		"CooldownBlink": {
-			"text2": [
-				"Мигание t°",
-				"при остывании"
-			],
-			"desc": "Мигать температурой на экране охлаждения, пока жало еще горячее"
-		},
-		"TemperatureCalibration": {
-			"text2": [
-				"Калибровка",
-				"температуры"
-			],
-			"desc": "Калибровка термодатчика жала"
-		},
-		"SettingsReset": {
-			"text2": [
-				"Сброс",
-				"Настроек"
-			],
-			"desc": "Сброс настроек к значеням по умолчанию"
-		},
-		"VoltageCalibration": {
-			"text2": [
-				"Калибровка",
-				"напряжения"
-			],
-			"desc": "Калибровка входного напряжения <длинное нажатие для выхода>"
-		},
-		"AdvancedSoldering": {
-			"text2": [
-				"Подробный",
-				"экран пайки"
-			],
-			"desc": "Показывать детальную информацию на экране пайки"
-		},
-		"ScrollingSpeed": {
-			"text2": [
-				"Скорость",
-				"текста"
-			],
-			"desc": "Скорость прокрутки текста <М=медленно, Б=быстро>"
-		},
-		"TipModel": {
-			"text2": [
-				"Модель",
-				"жала"
-			],
-			"desc": "Выбор модели жала"
-		},
-		"SimpleCalibrationMode": {
-			"text2": [
-				"Упрощенная",
-				"калибровка"
-			],
-			"desc": "Упрощенная калибровка с использованием горячей воды"
-		},
-		"AdvancedCalibrationMode": {
-			"text2": [
-				"Улучшенная",
-				"калибровка"
-			],
-			"desc": "Улучшенная калибровка с импользованием термопары жала"
-		},
-		"QCMaxVoltage": {
-			"text2": [
-				"Мощность",
-				"питания"
-			],
-			"desc": "Мощность используемого источника питания"
-		},
-		"PowerLimit": {
-			"text2": [
-				"Максимальная",
-				"мощность"
-			],
-			"desc": "Максимальная мощность, которую может использовать паяльник <Ватт>"
-		},
-		"ReverseButtonTempChange": {
-			"text2": [
-				"Инвертировать",
-				"кнопки"
-			],
-			"desc": "Инвертировать кнопки изменения температуры"
-		},
-		"TempChangeShortStep": {
-			"text2": [
-				"Шаг темп.",
-				"кор. наж."
-			],
-			"desc": "Шаг изменения температуры при коротком нажатии кнопок"
-		},
-		"TempChangeLongStep": {
-			"text2": [
-				"Шаг темп.",
-				"длин. наж."
-			],
-			"desc": "Шаг изменения температуры при длинном нажатии кнопок"
-		},
-		"PowerPulsePower": {
-			"text2": [
-				"Мощность импульса",
-				"питания Вт"
-			],
-			"desc": "Мощность импульса удерживающего от сна источник питания"
-		},
-		"TipGain": {
-			"text2": [
-				"Изменить",
-				"усиление жала"
-			],
-			"desc": "Усиление жала"
-		},
-		"HallEffSensitivity": {
-			"text2": [
-				"Эффект Холла",
-				"чувствительность"
-			],
-			"desc": "Уровень чувствительности датчика холла в режиме сна <O=Выкл,L=Низкий,M=Средний,H=Высокий>"
-		},
-		"LockingMode": {
-			"text2": [
-				"Разрешить блокировку",
-				"кнопок"
-			],
-			"desc": "При работе длинное нажатие обеих кнопок блокирует их <D=Отключено, B=Только турбо, F=Полная блокировка>"
-		}
-	}
-}

Translations/translation_sl.json

@@ -1,279 +0,0 @@
-{
-	"languageCode": "SL",
-	"languageLocalName": "Slovenščina",
-	"cyrillicGlyphs": false,
-	"messages": {
-		"SettingsCalibrationDone": "Kalibracija opravljena!",
-		"SettingsCalibrationWarning": "Pred nadaljevanjem mora biti konica segreta na sobno temperaturo!",
-		"SettingsResetWarning": "Res želite ponastaviti na privzete nastavitve?",
-		"UVLOWarningString": "NIZKA U",
-		"UndervoltageString": "Nizka napetost",
-		"InputVoltageString": "Vhodna U: ",
-		"WarningTipTempString": "Temp. kon.: ",
-		"BadTipString": "KONICA?",
-		"SleepingSimpleString": "Zzzz",
-		"SleepingAdvancedString": "Spim...",
-		"WarningSimpleString": "VROČ",
-		"WarningAdvancedString": "!!VROČA KONICA!!",
-		"SleepingTipAdvancedString": "Konica",
-		"IdleTipString": "Kon:",
-		"IdleSetString": " temp:",
-		"TipDisconnectedString": "NI KONICE",
-		"SolderingAdvancedPowerPrompt": "Moč: ",
-		"OffString": "Off",
-		"ResetOKMessage": "Reset OK",
-		"YourGainMessage": "Ojačenje",
-		"SettingsResetMessage": "Nastavitve OK!",
-		"NoAccelerometerMessage": "Ni pospeševalnik",
-		"NoPowerDeliveryMessage": "Ni USB-PD čipa!",
-		"LockingKeysString": "ZAKLENJ.",
-		"UnlockingKeysString": "ODKLENJ.",
-		"WarningKeysLockedString": "ZAKLENJ."
-	},
-	"characters": {
-		"SettingRightChar": "D",
-		"SettingLeftChar": "L",
-		"SettingAutoChar": "S",
-		"SettingFastChar": "H",
-		"SettingSlowChar": "P",
-		"SettingStartSolderingChar": "S",
-		"SettingStartSleepChar": "Z",
-		"SettingStartSleepOffChar": "V",
-		"SettingStartNoneChar": "U",
-		"SettingSensitivityOff": "U",
-		"SettingSensitivityLow": "N",
-		"SettingSensitivityMedium": "S",
-		"SettingSensitivityHigh": "V",
-		"SettingLockDisableChar": "O",
-		"SettingLockBoostChar": "L",
-		"SettingLockFullChar": "P"
-	},
-	"menuGroups": {
-		"SolderingMenu": {
-			"text2": [
-				"Nastavitve",
-				"spajkanja"
-			],
-			"desc": "Nastavitve spajkanja"
-		},
-		"PowerSavingMenu": {
-			"text2": [
-				"Način",
-				"spanja"
-			],
-			"desc": "Nastavitve varčevanja z energijo"
-		},
-		"UIMenu": {
-			"text2": [
-				"Uporabniški",
-				"vmesnik"
-			],
-			"desc": "Nastavitve uporabniškega vmesnika"
-		},
-		"AdvancedMenu": {
-			"text2": [
-				"Napredne",
-				"možnosti"
-			],
-			"desc": "Napredne možnosti"
-		}
-	},
-	"menuOptions": {
-		"DCInCutoff": {
-			"text2": [
-				"Vir",
-				"napajanja"
-			],
-			"desc": "Vir napajanja. Nastavi napetost izklopa. <DC 10V> <S 3.3V na celico>"
-		},
-		"SleepTemperature": {
-			"text2": [
-				"Temp. med",
-				"spanjem"
-			],
-			"desc": "Temperatura med spanjem"
-		},
-		"SleepTimeout": {
-			"text2": [
-				"Čas do",
-				"spanja"
-			],
-			"desc": "Čas pred spanjem <S=sekunde | M=minute>"
-		},
-		"ShutdownTimeout": {
-			"text2": [
-				"Čas do",
-				"izklopa"
-			],
-			"desc": "Čas do izklopa <M=minute>"
-		},
-		"MotionSensitivity": {
-			"text2": [
-				"Občutljivost",
-				"premikanja"
-			],
-			"desc": "0=izklopljeno | 1=najmanjša | ... | 9=največja"
-		},
-		"TemperatureUnit": {
-			"text2": [
-				"Enota za",
-				"temperaturo"
-			],
-			"desc": "Enota za temperaturo <C=celzij | F=fahrenheit>"
-		},
-		"AdvancedIdle": {
-			"text2": [
-				"Več info. na",
-				"mir. zaslonu"
-			],
-			"desc": "Prikaži več informacij z manjšo pisavo na mirovalnem zaslonu."
-		},
-		"DisplayRotation": {
-			"text2": [
-				"Orientacija",
-				"zaslona"
-			],
-			"desc": "S=samodejno | L=levičar | D=desničar"
-		},
-		"BoostTemperature": {
-			"text2": [
-				"Pospešena",
-				"temp."
-			],
-			"desc": "Temperatura v pospešenem načinu"
-		},
-		"AutoStart": {
-			"text2": [
-				"Samodejni",
-				"zagon"
-			],
-			"desc": "Samodejno gretje konice ob vklopu <U=ugasnjeno | S=spajkanje | Z=spanje | V=spanje na sobni temperaturi>"
-		},
-		"CooldownBlink": {
-			"text2": [
-				"Utripanje med",
-				"hlajenjem"
-			],
-			"desc": "Ko je konica še vroča, utripaj prikaz temperature med hlajenjem."
-		},
-		"TemperatureCalibration": {
-			"text2": [
-				"Kalibriram",
-				"temperaturo?"
-			],
-			"desc": "Kalibracija temperature na konici."
-		},
-		"SettingsReset": {
-			"text2": [
-				"Tovarniške",
-				"nastavitve?"
-			],
-			"desc": "Ponastavitev vseh nastavitev"
-		},
-		"VoltageCalibration": {
-			"text2": [
-				"Kalibriram",
-				"vhodno napetost?"
-			],
-			"desc": "Kalibracija VIN <nastavitve z gumbi, dolg pritisk za izhod>"
-		},
-		"AdvancedSoldering": {
-			"text2": [
-				"Več info na",
-				"zaslonu spaj."
-			],
-			"desc": "Prikaže več informacij z manjšo pisavo na zaslonu med spajkanjem."
-		},
-		"ScrollingSpeed": {
-			"text2": [
-				"Hitrost",
-				"besedila"
-			],
-			"desc": "Hitrost, s katero se prikazuje besedilo <P=počasi | H=hitro>"
-		},
-		"TipModel": {
-			"text2": [
-				"Tip",
-				"konice"
-			],
-			"desc": "Izbira tipa konice"
-		},
-		"SimpleCalibrationMode": {
-			"text2": [
-				"Preprosta",
-				"kalibracija"
-			],
-			"desc": "Preprosta kalibracija z vročo vodo."
-		},
-		"AdvancedCalibrationMode": {
-			"text2": [
-				"Napredna",
-				"kalibracija"
-			],
-			"desc": "Napredna kalibracija s termočlenom na konici"
-		},
-		"QCMaxVoltage": {
-			"text2": [
-				"QC",
-				"napetost"
-			],
-			"desc": "Moč napajalnega vira v vatih [W]"
-		},
-		"PowerLimit": {
-			"text2": [
-				"Meja",
-				"moči"
-			],
-			"desc": "Največja dovoljena moč v vatih [W]"
-		},
-		"ReverseButtonTempChange": {
-			"text2": [
-				"Obrni",
-				"tipki + -?"
-			],
-			"desc": "Zamenjaj funkciji gumbov."
-		},
-		"TempChangeShortStep": {
-			"text2": [
-				"Kratka sprememba",
-				"temperature?"
-			],
-			"desc": "Temperatura se spremeni ob kratkem pritisku na gumb."
-		},
-		"TempChangeLongStep": {
-			"text2": [
-				"Dolga sprememba",
-				"temperature?"
-			],
-			"desc": "Temperatura se spremeni ob dolgem pritisku na gumb."
-		},
-		"PowerPulsePower": {
-			"text2": [
-				"Pulz",
-				"moči"
-			],
-			"desc": "Velikost moči za vzdrževanje budnosti."
-		},
-		"TipGain": {
-			"text2": [
-				"Nastavi",
-				"moč kon."
-			],
-			"desc": "Nastavi moč konice."
-		},
-		"HallEffSensitivity": {
-			"text2": [
-				"Občut.",
-				"Hall son"
-			],
-			"desc": "Občutljivost Hallove sonde za zaznavanje spanja <U=ugasnjen | N=nizka | S=srednja | V=visoka>"
-		},
-		"LockingMode": {
-			"text2": [
-				"Omogoči",
-				"zaklep gumbov"
-			],
-			"desc": "Za zaklep med spajkanjem drži oba gumba <O=onemogoči | L=le pospešeno | P=polno>"
-		}
-	}
-}

Translations/translation_sr_cyrl.json

@@ -1,279 +0,0 @@
-{
-	"languageCode": "SR_CYRL",
-	"languageLocalName": "Српски",
-	"cyrillicGlyphs": true,
-	"messages": {
-		"SettingsCalibrationDone": "Калибрација готова",
-		"SettingsCalibrationWarning": "Проверите да ли је врх охлађен на собну температуру пре него што наставите",
-		"SettingsResetWarning": "Да ли заиста желите да вратите поставке на фабричке вредности?",
-		"UVLOWarningString": "НИЗ.НАП.",
-		"UndervoltageString": "ПРЕНИЗАК НАПОН",
-		"InputVoltageString": "Ул. напон: ",
-		"WarningTipTempString": "Темп. врха: ",
-		"BadTipString": "ЛОШ ВРХ",
-		"SleepingSimpleString": "Сан",
-		"SleepingAdvancedString": "Спавање...",
-		"WarningSimpleString": "ВРУЋ",
-		"WarningAdvancedString": "! ОПРЕЗ, ВРУЋЕ !",
-		"SleepingTipAdvancedString": "Врх:",
-		"IdleTipString": "Врх:",
-		"IdleSetString": " / ",
-		"TipDisconnectedString": "ВРХ НИЈЕ СПОЈЕН",
-		"SolderingAdvancedPowerPrompt": "Снага: ",
-		"OffString": "Иск",
-		"ResetOKMessage": "Reset OK",
-		"YourGainMessage": "Your gain:",
-		"SettingsResetMessage": "Settings were\nreset!",
-		"NoAccelerometerMessage": "No accelerometer\ndetected!",
-		"NoPowerDeliveryMessage": "No USB-PD IC\ndetected!",
-		"LockingKeysString": " LOCKED",
-		"UnlockingKeysString": "UNLOCKED",
-		"WarningKeysLockedString": "!LOCKED!"
-	},
-	"characters": {
-		"SettingRightChar": "Д",
-		"SettingLeftChar": "Л",
-		"SettingAutoChar": "А",
-		"SettingFastChar": "Б",
-		"SettingSlowChar": "С",
-		"SettingStartSolderingChar": "T",
-		"SettingStartSleepChar": "S",
-		"SettingStartSleepOffChar": "O",
-		"SettingStartNoneChar": "F",
-		"SettingSensitivityOff": "O",
-		"SettingSensitivityLow": "L",
-		"SettingSensitivityMedium": "M",
-		"SettingSensitivityHigh": "H",
-		"SettingLockDisableChar": "D",
-		"SettingLockBoostChar": "B",
-		"SettingLockFullChar": "F"
-	},
-	"menuGroups": {
-		"SolderingMenu": {
-			"text2": [
-				"Поставке",
-				"лемљења"
-			],
-			"desc": "Поставке режима лемљења."
-		},
-		"PowerSavingMenu": {
-			"text2": [
-				"Уштеда",
-				"енергије"
-			],
-			"desc": "Поставке режима мировања."
-		},
-		"UIMenu": {
-			"text2": [
-				"Корисничко",
-				"сучеље"
-			],
-			"desc": "Поставке корисничког сучеља."
-		},
-		"AdvancedMenu": {
-			"text2": [
-				"Напредне",
-				"поставке"
-			],
-			"desc": "Напредне поставке."
-		}
-	},
-	"menuOptions": {
-		"DCInCutoff": {
-			"text2": [
-				"Врста",
-				"напајања"
-			],
-			"desc": "Тип напајања; одређује најнижи радни напон. <DC=адаптер (10V), S=батерија (3,3V по ћелији)>"
-		},
-		"SleepTemperature": {
-			"text2": [
-				"Темп.",
-				"спавања"
-			],
-			"desc": "Температура на коју се спушта лемилица након одређеног времена мировања. <C/F>"
-		},
-		"SleepTimeout": {
-			"text2": [
-				"Време до",
-				"спавања"
-			],
-			"desc": "Време мировања након кога лемилица спушта температуру. <M=минути, S=секунде>"
-		},
-		"ShutdownTimeout": {
-			"text2": [
-				"Време до",
-				"гашења"
-			],
-			"desc": "Време мировања након кога се лемилица гаси. <M=минути>"
-		},
-		"MotionSensitivity": {
-			"text2": [
-				"Осетљивост",
-				"на покрет"
-			],
-			"desc": "Осетљивост сензора покрета. <0=искључено, 1=најмање осетљиво, 9=најосетљивије>"
-		},
-		"TemperatureUnit": {
-			"text2": [
-				"Јединица",
-				"температуре"
-			],
-			"desc": "Јединице у којима се приказује температура. <C=целзијус, F=фаренхајт>"
-		},
-		"AdvancedIdle": {
-			"text2": [
-				"Детаљи током",
-				"мировања"
-			],
-			"desc": "Приказивање детаљних информација на екрану током мировања."
-		},
-		"DisplayRotation": {
-			"text2": [
-				"Оријентација",
-				"екрана"
-			],
-			"desc": "Како је окренут екран. <А=аутоматски, Л=за леворуке, Д=за десноруке>"
-		},
-		"BoostTemperature": {
-			"text2": [
-				"Темп.",
-				"појачања"
-			],
-			"desc": "Температура врха лемилице у току појачања."
-		},
-		"AutoStart": {
-			"text2": [
-				"Врући",
-				"старт"
-			],
-			"desc": "Лемилица одмах по покретању прелази у режим лемљења и греје се."
-		},
-		"CooldownBlink": {
-			"text2": [
-				"Упозорење",
-				"при хлађењу"
-			],
-			"desc": "Приказ температуре трепће приликом хлађења докле год је врх и даље врућ."
-		},
-		"TemperatureCalibration": {
-			"text2": [
-				"Калибрација",
-				"температуре"
-			],
-			"desc": "Калибрисање одступања температуре врха у односу на дршку."
-		},
-		"SettingsReset": {
-			"text2": [
-				"Фабричке",
-				"поставке"
-			],
-			"desc": "Враћање свих поставки на фабричке вредности."
-		},
-		"VoltageCalibration": {
-			"text2": [
-				"Калибрација",
-				"улазног напона"
-			],
-			"desc": "Калибрисање улазног напона. Подешава се на тастере; дуги притисак за крај."
-		},
-		"AdvancedSoldering": {
-			"text2": [
-				"Детаљи током",
-				"лемљења"
-			],
-			"desc": "Приказивање детаљних информација на екрану током лемљења."
-		},
-		"ScrollingSpeed": {
-			"text2": [
-				"Брзина",
-				"порука"
-			],
-			"desc": "Брзина кретања описних порука попут ове. <С=споро, Б=брзо>"
-		},
-		"TipModel": {
-			"text2": [
-				"Модел",
-				"врха"
-			],
-			"desc": "Одабир модела лемног врха."
-		},
-		"SimpleCalibrationMode": {
-			"text2": [
-				"Једноставна",
-				"калибрација"
-			],
-			"desc": "Једноставна калибрација кипућом водом."
-		},
-		"AdvancedCalibrationMode": {
-			"text2": [
-				"Напредна",
-				"калибрација"
-			],
-			"desc": "Напредна калибрација помоћу термопара."
-		},
-		"QCMaxVoltage": {
-			"text2": [
-				"Улазна",
-				"снага"
-			],
-			"desc": "Снага напајања у ватима."
-		},
-		"PowerLimit": {
-			"text2": [
-				"Power",
-				"Limit"
-			],
-			"desc": "Maximum power the iron can use <Watts>"
-		},
-		"ReverseButtonTempChange": {
-			"text2": [
-				"Key +-",
-				"reverse?"
-			],
-			"desc": "Reverse the tip temperature change buttons plus minus assignment."
-		},
-		"TempChangeShortStep": {
-			"text2": [
-				"Temp change",
-				"short?"
-			],
-			"desc": "Temperature change steps on short button press!"
-		},
-		"TempChangeLongStep": {
-			"text2": [
-				"Temp change",
-				"long?"
-			],
-			"desc": "Temperature change steps on long button press!"
-		},
-		"PowerPulsePower": {
-			"text2": [
-				"Power",
-				"Pulse W"
-			],
-			"desc": "Keep awake pulse power intensity"
-		},
-		"TipGain": {
-			"text2": [
-				"Modify",
-				"tip gain"
-			],
-			"desc": "Tip gain"
-		},
-		"HallEffSensitivity": {
-			"text2": [
-				"Hall Eff",
-				"Sensitivity"
-			],
-			"desc": "Sensitivity of the Hall effect sensor in detecting sleep <O=Off,L=Low,M=Medium,H=High>"
-		},
-		"LockingMode": {
-			"text2": [
-				"Allow buttons",
-				"locking"
-			],
-			"desc": "When soldering, long press on both buttons lock them <D=Disable, B=Boost only, F=Full locking>"
-		}
-	}
-}

Translations/translation_sr_latn.json

@@ -1,279 +0,0 @@
-{
-	"languageCode": "SR_LATN",
-	"languageLocalName": "Srpski",
-	"cyrillicGlyphs": false,
-	"messages": {
-		"SettingsCalibrationDone": "Kalibracija gotova",
-		"SettingsCalibrationWarning": "Proverite da li je vrh ohlađen na sobnu temperaturu pre nego što nastavite",
-		"SettingsResetWarning": "Da li zaista želite da vratite postavke na fabričke vrednosti?",
-		"UVLOWarningString": "NIZ.NAP.",
-		"UndervoltageString": "PRENIZAK NAPON",
-		"InputVoltageString": "Ul. napon: ",
-		"WarningTipTempString": "Temp. vrha: ",
-		"BadTipString": "LOŠ VRH",
-		"SleepingSimpleString": "Zzz",
-		"SleepingAdvancedString": "Spavanje...",
-		"WarningSimpleString": "VRUĆ",
-		"WarningAdvancedString": "! OPREZ, VRUĆE !",
-		"SleepingTipAdvancedString": "Vrh:",
-		"IdleTipString": "Vrh:",
-		"IdleSetString": " / ",
-		"TipDisconnectedString": "VRH NIJE SPOJEN",
-		"SolderingAdvancedPowerPrompt": "Snaga: ",
-		"OffString": "Isk",
-		"ResetOKMessage": "Reset OK",
-		"YourGainMessage": "Your gain:",
-		"SettingsResetMessage": "Settings were\nreset!",
-		"NoAccelerometerMessage": "No accelerometer\ndetected!",
-		"NoPowerDeliveryMessage": "No USB-PD IC\ndetected!",
-		"LockingKeysString": " LOCKED",
-		"UnlockingKeysString": "UNLOCKED",
-		"WarningKeysLockedString": "!LOCKED!"
-	},
-	"characters": {
-		"SettingRightChar": "D",
-		"SettingLeftChar": "L",
-		"SettingAutoChar": "A",
-		"SettingFastChar": "B",
-		"SettingSlowChar": "S",
-		"SettingStartSolderingChar": "T",
-		"SettingStartSleepChar": "S",
-		"SettingStartSleepOffChar": "O",
-		"SettingStartNoneChar": "F",
-		"SettingSensitivityOff": "O",
-		"SettingSensitivityLow": "L",
-		"SettingSensitivityMedium": "M",
-		"SettingSensitivityHigh": "H",
-		"SettingLockDisableChar": "D",
-		"SettingLockBoostChar": "B",
-		"SettingLockFullChar": "F"
-	},
-	"menuGroups": {
-		"SolderingMenu": {
-			"text2": [
-				"Postavke",
-				"lemljenja"
-			],
-			"desc": "Postavke režima lemljenja."
-		},
-		"PowerSavingMenu": {
-			"text2": [
-				"Ušteda",
-				"energije"
-			],
-			"desc": "Postavke režima mirovanja."
-		},
-		"UIMenu": {
-			"text2": [
-				"Korisničko",
-				"sučelje"
-			],
-			"desc": "Postavke korisničkog sučelja."
-		},
-		"AdvancedMenu": {
-			"text2": [
-				"Napredne",
-				"postavke"
-			],
-			"desc": "Napredne postavke."
-		}
-	},
-	"menuOptions": {
-		"DCInCutoff": {
-			"text2": [
-				"Vrsta",
-				"napajanja"
-			],
-			"desc": "Tip napajanja; određuje najniži radni napon. <DC=adapter (10V), S=baterija (3,3V po ćeliji)>"
-		},
-		"SleepTemperature": {
-			"text2": [
-				"Temp.",
-				"spavanja"
-			],
-			"desc": "Temperatura na koju se spušta lemilica nakon određenog vremena mirovanja. <C/F>"
-		},
-		"SleepTimeout": {
-			"text2": [
-				"Vreme do",
-				"spavanja"
-			],
-			"desc": "Vreme mirovanja nakon koga lemilica spušta temperaturu. <M=minuti, S=sekunde>"
-		},
-		"ShutdownTimeout": {
-			"text2": [
-				"Vreme do",
-				"gašenja"
-			],
-			"desc": "Vreme mirovanja nakon koga se lemilica gasi. <M=minuti>"
-		},
-		"MotionSensitivity": {
-			"text2": [
-				"Osetljivost",
-				"na pokret"
-			],
-			"desc": "Osetljivost senzora pokreta. <0=isključeno, 1=najmanje osetljivo, 9=najosetljivije>"
-		},
-		"TemperatureUnit": {
-			"text2": [
-				"Jedinica",
-				"temperature"
-			],
-			"desc": "Jedinice u kojima se prikazuje temperatura. <C=celzijus, F=farenhajt>"
-		},
-		"AdvancedIdle": {
-			"text2": [
-				"Detalji tokom",
-				"mirovanja"
-			],
-			"desc": "Prikazivanje detaljnih informacija na ekranu tokom mirovanja."
-		},
-		"DisplayRotation": {
-			"text2": [
-				"Orijentacija",
-				"ekrana"
-			],
-			"desc": "Kako je okrenut ekran. <A=automatski, L=za levoruke, D=za desnoruke>"
-		},
-		"BoostTemperature": {
-			"text2": [
-				"Temp.",
-				"pojačanja"
-			],
-			"desc": "Temperatura vrha lemilice u toku pojačanja."
-		},
-		"AutoStart": {
-			"text2": [
-				"Vrući",
-				"start"
-			],
-			"desc": "Lemilica odmah po pokretanju prelazi u režim lemljenja i greje se."
-		},
-		"CooldownBlink": {
-			"text2": [
-				"Upozorenje",
-				"pri hlađenju"
-			],
-			"desc": "Prikaz temperature trepće prilikom hlađenja dokle god je vrh i dalje vruć."
-		},
-		"TemperatureCalibration": {
-			"text2": [
-				"Kalibracija",
-				"temperature"
-			],
-			"desc": "Kalibrisanje odstupanja temperature vrha u odnosu na dršku."
-		},
-		"SettingsReset": {
-			"text2": [
-				"Fabričke",
-				"postavke"
-			],
-			"desc": "Vraćanje svih postavki na fabričke vrednosti."
-		},
-		"VoltageCalibration": {
-			"text2": [
-				"Kalibracija",
-				"ulaznog napona"
-			],
-			"desc": "Kalibrisanje ulaznog napona. Podešava se na tastere; dugi pritisak za kraj."
-		},
-		"AdvancedSoldering": {
-			"text2": [
-				"Detalji tokom",
-				"lemljenja"
-			],
-			"desc": "Prikazivanje detaljnih informacija na ekranu tokom lemljenja."
-		},
-		"ScrollingSpeed": {
-			"text2": [
-				"Brzina",
-				"poruka"
-			],
-			"desc": "Brzina kretanja opisnih poruka poput ove. <S=sporo, B=brzo>"
-		},
-		"TipModel": {
-			"text2": [
-				"Model",
-				"vrha"
-			],
-			"desc": "Odabir modela lemnog vrha."
-		},
-		"SimpleCalibrationMode": {
-			"text2": [
-				"Jednostavna",
-				"kalibracija"
-			],
-			"desc": "Jednostavna kalibracija kipućom vodom."
-		},
-		"AdvancedCalibrationMode": {
-			"text2": [
-				"Napredna",
-				"kalibracija"
-			],
-			"desc": "Napredna kalibracija pomoću termopara."
-		},
-		"QCMaxVoltage": {
-			"text2": [
-				"Ulazna",
-				"snaga"
-			],
-			"desc": "Snaga napajanja u vatima."
-		},
-		"PowerLimit": {
-			"text2": [
-				"Power",
-				"Limit"
-			],
-			"desc": "Maximum power the iron can use <Watts>"
-		},
-		"ReverseButtonTempChange": {
-			"text2": [
-				"Key +-",
-				"reverse?"
-			],
-			"desc": "Reverse the tip temperature change buttons plus minus assignment."
-		},
-		"TempChangeShortStep": {
-			"text2": [
-				"Temp change",
-				"short?"
-			],
-			"desc": "Temperature change steps on short button press!"
-		},
-		"TempChangeLongStep": {
-			"text2": [
-				"Temp change",
-				"long?"
-			],
-			"desc": "Temperature change steps on long button press!"
-		},
-		"PowerPulsePower": {
-			"text2": [
-				"Power",
-				"Pulse W"
-			],
-			"desc": "Keep awake pulse power intensity"
-		},
-		"TipGain": {
-			"text2": [
-				"Modify",
-				"tip gain"
-			],
-			"desc": "Tip gain"
-		},
-		"HallEffSensitivity": {
-			"text2": [
-				"Hall Eff",
-				"Sensitivity"
-			],
-			"desc": "Sensitivity of the Hall effect sensor in detecting sleep <O=Off,L=Low,M=Medium,H=High>"
-		},
-		"LockingMode": {
-			"text2": [
-				"Allow buttons",
-				"locking"
-			],
-			"desc": "When soldering, long press on both buttons lock them <D=Disable, B=Boost only, F=Full locking>"
-		}
-	}
-}

Translations/translation_sv.json

@@ -1,279 +0,0 @@
-{
-	"languageCode": "SV",
-	"languageLocalName": "Svenska",
-	"cyrillicGlyphs": false,
-	"messages": {
-		"SettingsCalibrationDone": "Calibration done!",
-		"SettingsCalibrationWarning": "Please ensure the tip is at room temperature before continuing!",
-		"SettingsResetWarning": "Are you sure you want to reset settings to default values?",
-		"UVLOWarningString": "DC LÅG",
-		"UndervoltageString": "Underspänning",
-		"InputVoltageString": "Inspän. V: ",
-		"WarningTipTempString": "Spetstemp: ",
-		"BadTipString": "SPETSFEL",
-		"SleepingSimpleString": "Zzzz",
-		"SleepingAdvancedString": "Viloläge...",
-		"WarningSimpleString": "VARM",
-		"WarningAdvancedString": "!! SPETS VARM !!",
-		"SleepingTipAdvancedString": "Spets:",
-		"IdleTipString": "Spets:",
-		"IdleSetString": " Ange:",
-		"TipDisconnectedString": "SPETS URTAGEN",
-		"SolderingAdvancedPowerPrompt": "Ström: ",
-		"OffString": "Av",
-		"ResetOKMessage": "Reset OK",
-		"YourGainMessage": "Your gain:",
-		"SettingsResetMessage": "Settings were\nreset!",
-		"NoAccelerometerMessage": "No accelerometer\ndetected!",
-		"NoPowerDeliveryMessage": "No USB-PD IC\ndetected!",
-		"LockingKeysString": " LOCKED",
-		"UnlockingKeysString": "UNLOCKED",
-		"WarningKeysLockedString": "!LOCKED!"
-	},
-	"characters": {
-		"SettingRightChar": "H",
-		"SettingLeftChar": "V",
-		"SettingAutoChar": "A",
-		"SettingFastChar": "S",
-		"SettingSlowChar": "L",
-		"SettingStartSolderingChar": "T",
-		"SettingStartSleepChar": "S",
-		"SettingStartSleepOffChar": "O",
-		"SettingStartNoneChar": "F",
-		"SettingSensitivityOff": "O",
-		"SettingSensitivityLow": "L",
-		"SettingSensitivityMedium": "M",
-		"SettingSensitivityHigh": "H",
-		"SettingLockDisableChar": "D",
-		"SettingLockBoostChar": "B",
-		"SettingLockFullChar": "F"
-	},
-	"menuGroups": {
-		"SolderingMenu": {
-			"text2": [
-				"Lödnings-",
-				"inställningar"
-			],
-			"desc": "Lödningsinställningar"
-		},
-		"PowerSavingMenu": {
-			"text2": [
-				"Vilo-",
-				"lägen"
-			],
-			"desc": "Viloläges-inställningar"
-		},
-		"UIMenu": {
-			"text2": [
-				"Användar-",
-				"gränssnitt"
-			],
-			"desc": "Användargränssnitts-inställningar"
-		},
-		"AdvancedMenu": {
-			"text2": [
-				"Avancerade",
-				"alternativ"
-			],
-			"desc": "Avancerade alternativ"
-		}
-	},
-	"menuOptions": {
-		"DCInCutoff": {
-			"text2": [
-				"Ström-",
-				"källa"
-			],
-			"desc": "Strömkälla. Anger lägsta spänning. <DC 10V> <S 3.3V per cell>"
-		},
-		"SleepTemperature": {
-			"text2": [
-				"Vilo-",
-				"temp"
-			],
-			"desc": "Vilotemperatur <C>"
-		},
-		"SleepTimeout": {
-			"text2": [
-				"Vilo-",
-				"timeout"
-			],
-			"desc": "Vilo-timeout <Minuter/Seconder>"
-		},
-		"ShutdownTimeout": {
-			"text2": [
-				"Avstängn.",
-				"timeout"
-			],
-			"desc": "Avstängnings-timeout <Minuter>"
-		},
-		"MotionSensitivity": {
-			"text2": [
-				"Rörelse-",
-				"känslighet"
-			],
-			"desc": "Rörelsekänslighet <0.Av 1.minst känslig 9.mest känslig>"
-		},
-		"TemperatureUnit": {
-			"text2": [
-				"Temperatur-",
-				"enheter"
-			],
-			"desc": "Temperaturenhet <C=Celsius F=Fahrenheit>"
-		},
-		"AdvancedIdle": {
-			"text2": [
-				"Detaljerad",
-				"vid inaktiv"
-			],
-			"desc": "Visa detaljerad information i mindre typsnitt när inaktiv."
-		},
-		"DisplayRotation": {
-			"text2": [
-				"Visnings",
-				"läge"
-			],
-			"desc": "Visningsläge <A. Automatisk V. Vänsterhänt H. Högerhänt>"
-		},
-		"BoostTemperature": {
-			"text2": [
-				"Turbo-",
-				"temp"
-			],
-			"desc": "Temperatur i \"turbo\"-läge"
-		},
-		"AutoStart": {
-			"text2": [
-				"Auto",
-				"start"
-			],
-			"desc": "Startar automatiskt lödpennan vid uppstart. T=Lödning, S=Viloläge, F=Av"
-		},
-		"CooldownBlink": {
-			"text2": [
-				"Nedkylnings-",
-				"blink"
-			],
-			"desc": "Blinka temperaturen medan spetsen kyls av och fortfarande är varm."
-		},
-		"TemperatureCalibration": {
-			"text2": [
-				"Kalibrera",
-				"temperatur?"
-			],
-			"desc": "Kalibrera spets-kompensation."
-		},
-		"SettingsReset": {
-			"text2": [
-				"Fabriks-",
-				"inställ?"
-			],
-			"desc": "Återställ alla inställningar"
-		},
-		"VoltageCalibration": {
-			"text2": [
-				"Kalibrera",
-				"inspänning?"
-			],
-			"desc": "Inspänningskalibrering. Knapparna justerar, håll inne för avslut"
-		},
-		"AdvancedSoldering": {
-			"text2": [
-				"Detaljerad",
-				"lödng.skärm"
-			],
-			"desc": "Visa detaljerad information vid lödning"
-		},
-		"ScrollingSpeed": {
-			"text2": [
-				"Beskrivning",
-				"rullhast."
-			],
-			"desc": "Hastighet som den här texten rullar i"
-		},
-		"TipModel": {
-			"text2": [
-				"Tip",
-				"Model"
-			],
-			"desc": "Tip Model selection"
-		},
-		"SimpleCalibrationMode": {
-			"text2": [
-				"Simple",
-				"Calibration"
-			],
-			"desc": "Simple Calibration using Hot water"
-		},
-		"AdvancedCalibrationMode": {
-			"text2": [
-				"Advanced",
-				"Calibration"
-			],
-			"desc": "Advanced calibration using thermocouple on the tip"
-		},
-		"QCMaxVoltage": {
-			"text2": [
-				"Power",
-				"Wattage"
-			],
-			"desc": "Power Wattage of the power adapter used"
-		},
-		"PowerLimit": {
-			"text2": [
-				"Power",
-				"Limit"
-			],
-			"desc": "Maximum power the iron can use <Watts>"
-		},
-		"ReverseButtonTempChange": {
-			"text2": [
-				"Key +-",
-				"reverse?"
-			],
-			"desc": "Reverse the tip temperature change buttons plus minus assignment."
-		},
-		"TempChangeShortStep": {
-			"text2": [
-				"Temp change",
-				"short?"
-			],
-			"desc": "Temperature change steps on short button press!"
-		},
-		"TempChangeLongStep": {
-			"text2": [
-				"Temp change",
-				"long?"
-			],
-			"desc": "Temperature change steps on long button press!"
-		},
-		"PowerPulsePower": {
-			"text2": [
-				"Power",
-				"Pulse W"
-			],
-			"desc": "Keep awake pulse power intensity"
-		},
-		"TipGain": {
-			"text2": [
-				"Modify",
-				"tip gain"
-			],
-			"desc": "Tip gain"
-		},
-		"HallEffSensitivity": {
-			"text2": [
-				"Hall Eff",
-				"Sensitivity"
-			],
-			"desc": "Sensitivity of the Hall effect sensor in detecting sleep <O=Off,L=Low,M=Medium,H=High>"
-		},
-		"LockingMode": {
-			"text2": [
-				"Allow buttons",
-				"locking"
-			],
-			"desc": "When soldering, long press on both buttons lock them <D=Disable, B=Boost only, F=Full locking>"
-		}
-	}
-}

Translations/translation_tr.json

@@ -1,297 +0,0 @@
-{
-	"languageCode": "TR",
-	"languageLocalName": "Türkçe",
-	"cyrillicGlyphs": false,
-	"messages": {
-		"SettingsCalibrationDone": "Kalibrasyon tamamlandı!",
-		"SettingsCalibrationWarning": "Lütfen devam etmeden önce ucun oda sıcaklığında olduğunu garantiye alın!",
-		"SettingsResetWarning": "Ayarları varsayılan değerlere sıfırlamak istediğinizden emin misiniz?",
-		"UVLOWarningString": "Güç Az",
-		"UndervoltageString": "Düşük Voltaj",
-		"InputVoltageString": "Giriş V: ",
-		"WarningTipTempString": "Uç Sıcaklığı: ",
-		"BadTipString": "KÖTÜ UÇ",
-		"SleepingSimpleString": "Zzzz",
-		"SleepingAdvancedString": "Bekleme Modu ...",
-		"WarningSimpleString": "SICAK!",
-		"WarningAdvancedString": "UYARI! UÇ SICAK!",
-		"SleepingTipAdvancedString": "Uç:",
-		"IdleTipString": "Uç:",
-		"IdleSetString": " Ayarla:",
-		"TipDisconnectedString": "UÇ ÇIKARILDI",
-		"SolderingAdvancedPowerPrompt": "Güç: ",
-		"OffString": "Kapalı",
-		"ResetOKMessage": "Sıfırlama Tamam",
-		"YourGainMessage": "Kazancınız:",
-		"SettingsResetMessage": "Ayarlar Sıfırlandı",
-		"NoAccelerometerMessage": "No accelerometer\ndetected!",
-		"NoPowerDeliveryMessage": "No USB-PD IC\ndetected!"
-	},
-	"characters": {
-		"SettingRightChar": "R",
-		"SettingLeftChar": "L",
-		"SettingAutoChar": "A",
-		"SettingFastChar": "F",
-		"SettingSlowChar": "S",
-		"SettingStartSolderingChar": "T",
-		"SettingStartSleepChar": "S",
-		"SettingStartSleepOffChar": "O",
-		"SettingStartNoneChar": "F",
-		"SettingSensitivityOff": "O",
-		"SettingSensitivityLow": "L",
-		"SettingSensitivityMedium": "M",
-		"SettingSensitivityHigh": "H",
-		"SettingLockDisableChar": "D",
-		"SettingLockBoostChar": "B",
-		"SettingLockFullChar": "F"
-	},
-	"menuGroups": {
-		"SolderingMenu": {
-			"text2": [
-				"Lehimleme",
-				"Ayarları"
-			],
-			"desc": "Lehimleme Ayarları"
-		},
-		"PowerSavingMenu": {
-			"text2": [
-				"Uyku",
-				"Modları"
-			],
-			"desc": "Güç Tasarrufu Ayarları"
-		},
-		"UIMenu": {
-			"text2": [
-				"Kullanıcı",
-				"Arayüzü"
-			],
-			"desc": "Kullanıcı Arayüzü Ayarları"
-		},
-		"AdvancedMenu": {
-			"text2": [
-				"Gelişmiş",
-				"Ayarlar"
-			],
-			"desc": "Gelişmiş Ayarlar"
-		}
-	},
-	"menuOptions": {
-		"DCInCutoff": {
-			"text2": [
-				"GÇKYN",
-				""
-			],
-			"desc": "\"Güç Kaynağı\". En düşük çalışma voltajını ayarlar. <DC 10V> <S 3.3V hücre başına>"
-		},
-		"SleepTemperature": {
-			"text2": [
-				"BKSC",
-				""
-			],
-			"desc": "Bekleme Modu Sıcaklığı <C>"
-		},
-		"SleepTimeout": {
-			"text2": [
-				"BMZA",
-				""
-			],
-			"desc": "Bekleme Modu Zaman Aşımı <Dakika/Saniye>"
-		},
-		"ShutdownTimeout": {
-			"text2": [
-				"KPTZA",
-				""
-			],
-			"desc": "Kapatma Zaman Aşımı <Dakika>"
-		},
-		"MotionSensitivity": {
-			"text2": [
-				"HARHAS",
-				""
-			],
-			"desc": "Hareket Hassasiyeti <0.Kapalı 1.En az duyarlı 9.En duyarlı>"
-		},
-		"TemperatureUnit": {
-			"text2": [
-				"SCKBRM",
-				""
-			],
-			"desc": "Sıcaklık Birimi <C=Celsius F=Fahrenheit>"
-		},
-		"AdvancedIdle": {
-			"text2": [
-				"AYRBİL",
-				""
-			],
-			"desc": "Boş ekranda ayrıntılı bilgileri daha küçük bir yazı tipi ile göster."
-		},
-		"DisplayRotation": {
-			"text2": [
-				"GRNYÖN",
-				""
-			],
-			"desc": "Görüntü Yönlendirme <A. Otomatik L. Solak R. Sağlak>"
-		},
-		"BoostEnabled": {
-			"text2": [
-				"YÜKPER",
-				""
-			],
-			"desc": "Lehimleme yaparken ön tuşa basmak anlık sıcaklık yükselişi sağlar. (450C)"
-		},
-		"BoostTemperature": {
-			"text2": [
-				"YKSC",
-				""
-			],
-			"desc": "Yüksek Performans Modu Sıcaklığı"
-		},
-		"AutoStart": {
-			"text2": [
-				"OTOBAŞ",
-				""
-			],
-			"desc": "Güç verildiğinde otomatik olarak lehimleme modunda başlat. T=Lehimleme Modu, S= Uyku Modu,F=Kapalı"
-		},
-		"CooldownBlink": {
-			"text2": [
-				"SĞGÖST",
-				""
-			],
-			"desc": "Soğutma ekranında uç hala sıcakken derece gösterilsin."
-		},
-		"TemperatureCalibration": {
-			"text2": [
-				"SCK KAL?",
-				""
-			],
-			"desc": "Ucu kalibre et."
-		},
-		"SettingsReset": {
-			"text2": [
-				"SIFIRLA?",
-				""
-			],
-			"desc": "Bütün ayarları sıfırlar"
-		},
-		"VoltageCalibration": {
-			"text2": [
-				"VOL KAL?",
-				""
-			],
-			"desc": "Voltaj Girişi Kalibrasyonu. Düğmeler ayarlar, çıkmak için uzun bas."
-		},
-		"AdvancedSoldering": {
-			"text2": [
-				"GELLHM",
-				""
-			],
-			"desc": "\"Gelişmiş Lehimleme\" Lehimleme yaparken detaylı bilgi göster"
-		},
-		"ScrollingSpeed": {
-			"text2": [
-				"YZKYHZ",
-				""
-			],
-			"desc": "Bu yazının kayma hızı S= Yavaş, F= Hızlı"
-		},
-		"TipModel": {
-			"text2": [
-				"Uç",
-				"Modeli"
-			],
-			"desc": "Uç Modeli seçimi"
-		},
-		"SimpleCalibrationMode": {
-			"text2": [
-				"Basit",
-				"Kalibrasyon"
-			],
-			"desc": "Sıcak su kullanarak basit kalibrasyon"
-		},
-		"AdvancedCalibrationMode": {
-			"text2": [
-				"Gelişmiş",
-				"Kalibrasyon"
-			],
-			"desc": "Uçtaki ısı sensörünü kullanarak gelişmiş kalibrasyon"
-		},
-		"QCMaxVoltage": {
-			"text2": [
-				"QC",
-				"Voltage"
-			],
-			"desc": "Desired max QC Voltage negotiated for"
-		},
-		"PowerInput": {
-			"text2": [
-				"Güç",
-				"Miktarı(W)"
-			],
-			"desc": "Kullanılan adaptörün watt biriminden güç miktarı"
-		},
-		"PowerLimitEnable": {
-			"text2": [
-				"P Limit",
-				"Enable"
-			],
-			"desc": "Güç sınırlamayı aç"
-		},
-		"PowerLimit": {
-			"text2": [
-				"Power",
-				"Limit"
-			],
-			"desc": "Havyanın kullanacağı en yüksek güç <Watts>"
-		},
-		"ReverseButtonTempChange": {
-			"text2": [
-				"Key +-",
-				"reverse?"
-			],
-			"desc": "\"Düğme Yerleri Rotasyonu\" Sıcaklık ayar düğmelerinin yerini değiştirin"
-		},
-		"TempChangeShortStep": {
-			"text2": [
-				"Temp change",
-				"short?"
-			],
-			"desc": "Kısa basışlardaki sıcaklık derecesi atlama oranı"
-		},
-		"TempChangeLongStep": {
-			"text2": [
-				"Temp change",
-				"long?"
-			],
-			"desc": "Uzun başışlardaki sıcaklık derecesi atlama oranı"
-		},
-		"PowerPulsePower": {
-			"text2": [
-				"Power",
-				"Pulse W"
-			],
-			"desc": "Güç girişi voltajı ölçüm yoğunluğunu sık tut."
-		},
-		"TipGain": {
-			"text2": [
-				"Modify",
-				"tip gain"
-			],
-			"desc": "Kazancınız"
-		},
-		"HallEffSensitivity": {
-			"text2": [
-				"Hall Eff",
-				"Sensitivity"
-			],
-			"desc": "Sensitivity of the Hall effect sensor in detecting sleep <O=Off,L=Low,M=Medium,H=High>"
-		},
-		"LockingMode": {
-			"text2": [
-				"Allow buttons",
-				"locking"
-			],
-			"desc": "When soldering, long press on both buttons lock them <D=Disable, B=Boost only, F=Full locking>"
-		}
-	}
-}

Translations/translation_uk.json

@@ -1,279 +0,0 @@
-{
-	"languageCode": "UK",
-	"languageLocalName": "Українська",
-	"cyrillicGlyphs": true,
-	"messages": {
-		"SettingsCalibrationDone": "Калібрування виконане!",
-		"SettingsCalibrationWarning": "Переконайтеся, що жало охололо до кімнатної температури, перш ніж продовжувати!",
-		"SettingsResetWarning": "Ви дійсно хочете скинути налаштування до значень за замовчуванням? <A - Так, В - Ні>",
-		"UVLOWarningString": "АККУМ--",
-		"UndervoltageString": "Низ. напруга",
-		"InputVoltageString": "Жив.(B): ",
-		"WarningTipTempString": "Жало t°: ",
-		"BadTipString": "ЖАЛО--",
-		"SleepingSimpleString": "ZzZzz",
-		"SleepingAdvancedString": "Очікування...",
-		"WarningSimpleString": "ГАРЯЧЕ!",
-		"WarningAdvancedString": "!!! ГАРЯЧЕ ЖАЛО !!!",
-		"SleepingTipAdvancedString": "Жало:",
-		"IdleTipString": "Жало:",
-		"IdleSetString": " ->",
-		"TipDisconnectedString": "Жало вимкнено!",
-		"SolderingAdvancedPowerPrompt": "Живлення: ",
-		"OffString": "Вимк",
-		"ResetOKMessage": "Скидання OK",
-		"YourGainMessage": "Приріст:",
-		"SettingsResetMessage": "Налаштування скинуті!",
-		"NoAccelerometerMessage": "Акселерометр\nне виявлено!",
-		"NoPowerDeliveryMessage": "USB-PD IC\nне виявлено!",
-		"LockingKeysString": " ЗАБЛОКОВАНО",
-		"UnlockingKeysString": "РОЗБЛОКОВАНО",
-		"WarningKeysLockedString": "!ЗАБЛОКОВАНО!"
-	},
-	"characters": {
-		"SettingRightChar": "П",
-		"SettingLeftChar": "Л",
-		"SettingAutoChar": "A",
-		"SettingFastChar": "Ш",
-		"SettingSlowChar": "П",
-		"SettingStartSolderingChar": "П",
-		"SettingStartSleepChar": "О",
-		"SettingStartSleepOffChar": "К",
-		"SettingStartNoneChar": "В",
-		"SettingSensitivityOff": "В",
-		"SettingSensitivityLow": "Н",
-		"SettingSensitivityMedium": "С",
-		"SettingSensitivityHigh": "М",
-		"SettingLockDisableChar": "В",
-		"SettingLockBoostChar": "Т",
-		"SettingLockFullChar": "П"
-	},
-	"menuGroups": {
-		"SolderingMenu": {
-			"text2": [
-				"Параметри",
-				"пайки"
-			],
-			"desc": "Налаштування для режиму пайки. Діють при включеному жалі."
-		},
-		"PowerSavingMenu": {
-			"text2": [
-				"Режим",
-				"сну"
-			],
-			"desc": "Налаштування при бездіяльності. Корисно що б не обпектися і з часом не спалити житло."
-		},
-		"UIMenu": {
-			"text2": [
-				"Інтерфейс",
-				""
-			],
-			"desc": "Параметри користувальницького інтерфейсу."
-		},
-		"AdvancedMenu": {
-			"text2": [
-				"Додаткові",
-				"параметри"
-			],
-			"desc": "Розширені налаштування. Додаткові зручності."
-		}
-	},
-	"menuOptions": {
-		"DCInCutoff": {
-			"text2": [
-				"Джерело",
-				"живлення"
-			],
-			"desc": "Встановлення напруги відключення. <DC - 10V, 3S - 9.9V, 4S - 13.2V, 5S - 16.5V, 6S - 19.8V>"
-		},
-		"SleepTemperature": {
-			"text2": [
-				"Темпер.",
-				"сну"
-			],
-			"desc": "Температура режиму очікування <C°/F°>"
-		},
-		"SleepTimeout": {
-			"text2": [
-				"Тайм-аут",
-				"сну"
-			],
-			"desc": "Час до переходу в режим очікування <Хвилини/Секунди>"
-		},
-		"ShutdownTimeout": {
-			"text2": [
-				"Часу до",
-				"вимкнення"
-			],
-			"desc": "Час до відключення <Хвилини>"
-		},
-		"MotionSensitivity": {
-			"text2": [
-				"Чутл. сенсо-",
-				"ру руху"
-			],
-			"desc": "Акселерометр <0 - Вимк. 1 - мін. чутливості 9 - макс. чутливості>"
-		},
-		"TemperatureUnit": {
-			"text2": [
-				"Формат темпе-",
-				"ратури(C°/F°)"
-			],
-			"desc": "Одиниця виміру температури <C - Цельсій, F - Фаренгейт>"
-		},
-		"AdvancedIdle": {
-			"text2": [
-				"Детальний ре-",
-				"жим очікуван."
-			],
-			"desc": "Показувати детальну інформацію маленьким шрифтом на домашньому екрані"
-		},
-		"DisplayRotation": {
-			"text2": [
-				"Автоповорот",
-				"екрану"
-			],
-			"desc": "Орієнтація дисплея <A - Автоповорот, Л - Лівша, П - Правша>"
-		},
-		"BoostTemperature": {
-			"text2": [
-				"Темпер.",
-				"Турбо"
-			],
-			"desc": "Температура в Турбо-режимі"
-		},
-		"AutoStart": {
-			"text2": [
-				"Гарячий",
-				"старт"
-			],
-			"desc": "Режим з яким запускається паяльник при подачі живлення <П=Пайка, О=Очікування, К=Очікування при кімн. темп., В=Вимк.>"
-		},
-		"CooldownBlink": {
-			"text2": [
-				"Показ t° при",
-				"охолодж."
-			],
-			"desc": "Показувати температуру на екрані охолодження, поки жало залишається гарячим, при цьому екран моргає"
-		},
-		"TemperatureCalibration": {
-			"text2": [
-				"Калібровка",
-				"температури"
-			],
-			"desc": "Калібрування температурного датчика."
-		},
-		"SettingsReset": {
-			"text2": [
-				"Скинути всі",
-				"налаштування?"
-			],
-			"desc": "Скидання всіх параметрів до стандартних значень."
-		},
-		"VoltageCalibration": {
-			"text2": [
-				"Калібрування",
-				"напруги"
-			],
-			"desc": "Калібрування напруги входу. Налаштувати кнопками, натиснути і утримати щоб завершити."
-		},
-		"AdvancedSoldering": {
-			"text2": [
-				"Детальний ре-",
-				"жим пайки"
-			],
-			"desc": "Показувати детальну інформацію при пайці."
-		},
-		"ScrollingSpeed": {
-			"text2": [
-				"Швидкість",
-				"тексту"
-			],
-			"desc": "Швидкість прокрутки тексту <П=повільно, Ш=швидко>"
-		},
-		"TipModel": {
-			"text2": [
-				"Модель",
-				"Жало"
-			],
-			"desc": "Вибір моделі жала"
-		},
-		"SimpleCalibrationMode": {
-			"text2": [
-				"Просте",
-				"Калібрування"
-			],
-			"desc": "Просте калібрування з використанням гарячої води"
-		},
-		"AdvancedCalibrationMode": {
-			"text2": [
-				"Детальне",
-				"Калібрування"
-			],
-			"desc": "Калібрування за допомогою термопари"
-		},
-		"QCMaxVoltage": {
-			"text2": [
-				"Потужність",
-				"дж. живл."
-			],
-			"desc": "Потужність джерела живлення в Ватах"
-		},
-		"PowerLimit": {
-			"text2": [
-				"Макс.",
-				"потуж."
-			],
-			"desc": "Макс. потужність, яку може використовувати паяльник <Ват>"
-		},
-		"ReverseButtonTempChange": {
-			"text2": [
-				"Інвертувати",
-				"кнопки +-?"
-			],
-			"desc": "Інвертувати кнопки зміни температури."
-		},
-		"TempChangeShortStep": {
-			"text2": [
-				"Зм. темп.",
-				"коротко?"
-			],
-			"desc": "Змінювати температуру при короткому натисканні!"
-		},
-		"TempChangeLongStep": {
-			"text2": [
-				"Зм. темп.",
-				"довго?"
-			],
-			"desc": "Змінювати температуру при довгому натисканні!"
-		},
-		"PowerPulsePower": {
-			"text2": [
-				"Пульс.",
-				"Навантаж."
-			],
-			"desc": "Деякі PowerBank-и з часом вимк. живлення, якщо пристрій споживає дуже мало енергії (це потрібно щоб паяльник не вимкнувся з часом)"
-		},
-		"TipGain": {
-			"text2": [
-				"Modify",
-				"tip gain"
-			],
-			"desc": "Tip gain"
-		},
-		"HallEffSensitivity": {
-			"text2": [
-				"Чутливість",
-				"Ефекту Холла"
-			],
-			"desc": "Чутливість датчика ефекту Холла при виявленні сну <В=Вимк,Н=Низький,С=Середній,М=Макс>"
-		},
-		"LockingMode": {
-			"text2": [
-				"Дозволити",
-				"блокування кнопок"
-			],
-			"desc": "Під час пайки тривале натискання обох кнопок заблокує їх <В=Вимк, Т=Тільки турбо, П=Повне>"
-		}
-	}
-}