Merge pull request #1494 from discip/patch-1

Cleanup reset message + remove redundant enties

.github/workflows/docs.yml

@@ -0,0 +1,35 @@
+
+name: Docs
+
+# Controls when the workflow will run
+on:
+  # Triggers the workflow on push or pull request
+  push:
+    branches: [ dev, docs ]
+
+  # Allows you to run this workflow manually from the Actions tab
+  workflow_dispatch:
+
+
+# Allow one concurrent deployment
+concurrency:
+  group: "pages"
+  cancel-in-progress: true
+
+
+jobs:
+  deploy-docs:
+    # The type of runner that the job will run on
+    runs-on: ubuntu-latest
+
+    steps:
+      - uses: actions/checkout@v3
+        with:
+          fetch-depth: 0
+      - uses: actions/setup-python@v4
+
+      - run: pip install --upgrade pip && pip install mkdocs mkdocs-gen-files
+      - run: git config user.name 'github-actions[bot]' && git config user.email 'github-actions[bot]@users.noreply.github.com'
+      
+      - name: Publish docs
+        run: mkdocs gh-deploy

.github/workflows/push.yml

@@ -6,10 +6,10 @@ jobs:
   build:
     runs-on: ubuntu-20.04
     container:
-      image: alpine:3.15
+      image: alpine:3.16
     strategy:
       matrix:
-        model: ["TS100", "TS80", "TS80P", "Pinecil", "MHP30"]
+        model: ["TS100", "TS80", "TS80P", "Pinecil", "MHP30", "Pinecilv2"]
       fail-fast: true
 
     steps:
@@ -22,7 +22,7 @@ jobs:
       - uses: actions/checkout@v3
         with:
           submodules: true
-          
+
       - name: Git ownership exception
         run: git config --global --add safe.directory /__w/IronOS/IronOS && git config --global safe.directory "$GITHUB_WORKSPACE"
 
@@ -41,6 +41,7 @@ jobs:
           path: |
             source/Hexfile/${{ matrix.model }}_*.hex
             source/Hexfile/${{ matrix.model }}_*.dfu
+            source/Hexfile/${{ matrix.model }}_*.bin
             source/Hexfile/LICENSE
             source/Hexfile/LICENSE_RELEASE.md
           if-no-files-found: error
@@ -57,25 +58,25 @@ jobs:
   build_multi-lang:
     runs-on: ubuntu-20.04
     container:
-      image: alpine:3.15
+      image: alpine:3.16
     strategy:
       matrix:
-        model: ["Pinecil"]
+        model: ["Pinecil", "Pinecilv2"]
       fail-fast: true
 
     steps:
       - name: Install dependencies (apk)
-        run: apk add --no-cache gcc-riscv-none-elf gcc-arm-none-eabi newlib-riscv-none-elf newlib-arm-none-eabi findutils python3 py3-pip make git bash musl-dev
+        run: apk add --no-cache gcc-riscv-none-elf newlib-riscv-none-elf findutils python3 py3-pip make git bash musl-dev
       - name: Install dependencies (python)
         run: python3 -m pip install bdflib
 
       - uses: actions/checkout@v3
         with:
           submodules: true
-      
+
       - name: Git ownership exception
         run: git config --global --add safe.directory /__w/IronOS/IronOS && git config --global safe.directory "$GITHUB_WORKSPACE"
-      
+
       - name: build ${{ matrix.model }}
         run: cd source && make -j$(nproc) model="${{ matrix.model }}" firmware-multi_compressed_European firmware-multi_compressed_Bulgarian+Russian+Serbian+Ukrainian firmware-multi_Chinese+Japanese
 
@@ -91,23 +92,24 @@ jobs:
           path: |
             source/Hexfile/${{ matrix.model }}_*.hex
             source/Hexfile/${{ matrix.model }}_*.dfu
+            source/Hexfile/${{ matrix.model }}_*.bin
             source/Hexfile/LICENSE
             source/Hexfile/LICENSE_RELEASE.md
           if-no-files-found: error
 
       - name: Generate json index file
-        run: cd source && python3 metadata.py Pinecil_multi-lang.json
+        run: cd source && python3 metadata.py ${{ matrix.model }}_multi-lang.json
 
       - name: Archive ${{ matrix.model }} index file
         uses: actions/upload-artifact@v3
         with:
           name: metadata
-          path: source/Hexfile/Pinecil_multi-lang.json
+          path: source/Hexfile/${{ matrix.model }}_multi-lang.json
 
   tests:
     runs-on: ubuntu-20.04
     container:
-      image: alpine:3.15
+      image: alpine:3.16
 
     steps:
       - name: deps
@@ -134,7 +136,7 @@ jobs:
   check_formatting:
     runs-on: ubuntu-20.04
     container:
-      image: alpine:3.15
+      image: alpine:3.16
 
     steps:
       - name: deps

.github/workflows/weblate.yml

@@ -0,0 +1,25 @@
+name: Weblate PR
+on:
+  create:
+    branches: ["^translations$"]
+
+jobs:
+  pull-request:
+    name: Open PR to dev
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@v3
+        name: checkout
+
+      - uses: repo-sync/pull-request@v2
+        name: pull-request
+        with:
+          destination_branch: "dev"
+          pr_title: "Merging newest translations into dev" # Title of pull request
+          pr_body: | # Full markdown support, requires pr_title to be set
+            Translations automatically submitted by Weblate
+
+            _Translations from [Weblate](https://hosted.weblate.org/projects/ironos/main-firmware/)_
+          pr_reviewer: "ralim"
+          pr_draft: false
+          github_token: ${{ secrets.GITHUB_TOKEN }}

.gitignore

@@ -176,4 +176,5 @@ fabric.properties
 
 CoreCompileInputs.cache
 .vscode/settings.json
-source/compile_commands.json
+source/compile_commands.json
+.idea/

Bootup Logo/README.md

@@ -4,4 +4,4 @@ IronOS supports both a bootup logo _AND_ bootup animations.
 
 However, they are no longer included in this repo.
 
-(Please read the docs)[../Documentation/Logo.md]
+[Please read the docs](https://ralim.github.io/IronOS/Logo/)

Dockerfile

@@ -1,4 +1,4 @@
-FROM alpine:3.15
+FROM alpine:3.16
 LABEL maintainer="Ben V. Brown <ralim@ralimtek.com>"
 
 WORKDIR /build
@@ -14,6 +14,8 @@ RUN apk add --no-cache gcc-riscv-none-elf gcc-arm-none-eabi newlib-riscv-none-el
 # Install Python3 packages
 
 RUN python3 -m pip install bdflib black
+# Git trust
+RUN git config --global --add safe.directory /build/source
 
 COPY . /build/source
 COPY ./ci /build/ci

Documentation/DebugMenu.md

@@ -1,56 +1,19 @@
 # Debugging Menu
 
-In this firmware there is extra debugging information hidden under an extra menu.
-This is accessed by holding the rear (-/B) button on the iron while it is on the home screen.
-
+In this firmware there is extra debugging information in a hidden sub-menu.
 This menu is meant to be simple, so it has no fancy GUI animations.
 
-To move through the menu use the front (+/A) button.
-To exit, use the rear (-/B) button again.
+- Access it by pressing the rear button (`-/B`) on the iron while it is on the home screen.
+- Use the front button (`+/A`) to scroll through the menu.
+- To exit, use the rear button (`-/B`) again.
 
 ## Menu items
 
-Items are shown in the menu on a single line, so they use short codes
+Items are shown in the menu on a single line, so they use short codes and appear in this order:
 
-### HW G
-
-This indicates the high water mark for the stack for the GUI thread. The smaller this number is, the less headroom we have in the stack.
-As this is a high-water mater, you should only trust this once you have walked through all GUI options to "hit" the worst one.
-
-### HW M
-
-This indicates the high water mark for the stack for the movement detection thread. The smaller this number is, the less headroom we have in the stack.
-
-### HW P
-
-This indicates the high water mark for the stack for the PID thread. The smaller this number is, the less headroom we have in the stack.
-
-### Time
-
-This just shows how many deciseconds the unit has been powered for.
-
-### Move
-
-This is the last timestamp of movement. When the iron is moved this should update to match the time field (one before in the menu).
-This can be used for checking performance of the movement dection code.
-
-### RTip
-
-This is the raw tip reading in μV. This can be used when assessing the calibration routines for example.
-
-### CTip
-
-This is the tip temperature in degrees Celsius.
-This can be used with RTip for assessing temperature processing performance.
-
-### CHan
-
-This is the handle temperature in °C. This is used for cold junction compensation of the tip temperature.
-This is shown in degrees Celsius x10, so 200 == 20.0 °C
-
-### Vin
-
-The input voltage as read by the internal ADC. Can be used to sanity check its being read correctly.
+### ID
+- This is used by Irons that have an ID and serial number to help check if the iron is authentic. All Pinecil V1 show the same ID number as this is the number programmed into the MCU.
+- The new Pinecil V2 released Aug. 2, 2022 now uses MCU BL706, which enables generating a unique ID/Serial number to every iron. This can be used to verify your [Pinecil authenticity here](https://pinecil.pine64.org/).
 
 ### ACC
 
@@ -61,7 +24,7 @@ This indicates the accelerometer that is fitted inside the unit.
 - BMA223
 - MSA301
 - SC7A20
-- None detected -> running in fallback without movement detection
+- None -> running in fallback without movement detection
 - Scanning -> Still searching I2C for one
 
 ### PWR
@@ -71,28 +34,90 @@ This may change during power up as the sources are negotiated in turn.
 
 - **DC** input (dumb)
 - **QC** input (We used QC2/3 negotiation for current supply)
-- **PD W. VBus** input (We used the PD subsystem to negotiate for the current supply); and VBus is connected to your input power source
-- **PD No VBus** input (We used the PD subsystem to negotiate for the current supply); and VBus is **NOT** connected to your input power source
-- If you successfully modified the Pinecil to support 24 V by cutting the trace line to Vbus, then 'PD No VBus' displays on screen.
-- Connect to any PD USB power to check Vbus status. It will not show any PD message when Pinecil is powered by DC port, QC, or USB 5 V (non PD).
+- **PD W. VBus** input (PD subsystem is used to negotiate for current supply); and VBus is connected to your input power source
+- **PD No VBus** input (PD subsystem is used to negotiate for current supply); and VBus is **NOT** connected to your input power source. If it is Not required or possible to do a special mod of your PCB (i.e. late model V1, some early Green PCB models) then [PD No VBus] displays on-screen ([see details and PD Debug section below](https://ralim.github.io/IronOS/DebugMenu/#pd-debug-menu)).
 
-### Max
+### Vin
 
-This indicates the max temperature in degrees Celsius that the system estimates it can measure the tip reliably to.
-This is dependant on a few factors including the handle temperature so it can move around during use.
+The input voltage as read by the internal ADC. Can be used to sanity check it is being read correctly.
+
+### Tip C
+
+This is the tip temperature in °C.
+This can be used with RTip for assessing temperature processing performance.
+
+### Han C
+
+This is the handle temperature or more accurately the reading of the Cold Junction Compensation (CJC) temperature sensor. This is expressed in °C. Range of 20-40 °C is normal depending on how hot/cold the room is and how long power has been plugged in which warms the PCB further.
+This is used for CJC of the tip temperature.
+ > If CHan is extremely high, this indicates the temperature sensor isn't reading correctly ([see Troubleshooting](https://ralim.github.io/IronOS/Troubleshooting/))
+
+
+### Max C
+
+This indicates the max temperature in °C that the system estimates it can measure the tip reliably to.
+This is dependent on a few factors including the handle temperature so it can move around during use. As you use the iron, the Max increases to a point.
+
+### UpTime
+
+This shows how many deciseconds the unit has been powered for (600 ds = 1 minute).
+
+### Move
+
+This is the last timestamp of movement. When the iron is moved, this should update to match the Time field (previous menu item).
+This can be used for checking performance of the movement detection code.
+
+### Tip Res
+
+This indicates the tip resistance that the device is currently using. For devices with multiple possible values to choose from (Pinecil V2), the appropriate value is automatically detected at every boot-up. Tip should be installed before boot-up or reading can not be done.
+
+### Tip R
+
+This is the raw tip reading in μV. Tip must be installed or reading will be high/inaccurate. At cool, the range of 700-1000 is normal for larger tips and ~1500 for smaller tips (TS80). This is used to evaluate the calibration routines.
+
+### Tip O
+
+This is the offset resulting from the *'Cold Junction Compensation Calibration'*.
+
+### HW G
+
+This indicates the high water mark for the stack for the GUI thread. The smaller this number is, the less headroom we have in the stack.
+As this is a high-water mater, you should only trust this once you have walked through all GUI options to "hit" the worst one.
+
+### HW M
+
+This indicates the high-water mark for the stack for the movement detection thread. The smaller this number is, the less headroom we have in the stack.
+
+### HW P
+
+This indicates the high-water mark for the stack for the PID thread. The smaller this number is, the less headroom we have in the stack.
 
 ### Hall
 
-This appears if your device is capable of having a magnetic hall effect sensor installed (Pinecil).
-This shows the current field strength reading from the sensor. It can be used to check if the sensor is operational, and measure how strong the magnetic field is for diagnostics and optimal placement of magnets on a stand.
+This appears if your device is capable of having a hall effect sensor installed (Pinecil).
+This shows the current magnetic field strength reading from the sensor. It is used to check if the sensor is operational, and for diagnostics and optimal placement of magnets on a stand (higher number is better/stronger). [See Hall Sensor for details](https://ralim.github.io/IronOS/HallSensor/). 
 
 # PD Debug menu
 
-On the Pinecil; if the iron is booted up while holding the front button (+); it will show an extra menu for inspecting USB-PD power adapters.
+On the Pinecil; if the iron is booted up while long holding the front button (`+`); it will show an extra hidden menu for inspecting USB-PD power adapters. We can also connect to any PD USB power to check Vbus status, even some cell phones with a USB-C port will work if it is PD. It will not show PD messages when Pinecil is powered by DC port, QC, or USB 5V (non-PD). For example, if you connect to a QC charger, you may simply see "PD State 6" which indicates "waiting for source" as no PD messages will be ever be sent and you will not be able to use (`+`) to scroll through PD negotiated messages.
 
-The menu navigates like the debug menu, where pressing (+) cycles through elements, and (-) will exit the menu.
+Pressing (`+`) cycles through elements, and (`-`) or unplugging will exit the menu.
+
+The first page shows the PD negotiation stage number; which can be used for diagnosing if PD is not working. Once negotiation is complete; use (`+`) button to advance to other screens which show the different proposals advertised for voltage and current (State 12 means all is good with the PD charger).
+
+#### Below is a method for user modification to convert some early models of Pinecil V1 to safely support 24V on the DC5525 barrel.
+⚠️ Warning: do this at your own risk, read everything in this document, and go to the [Pine64 community chat](https://wiki.pine64.org/wiki/Pinecil#Community_links) if you desire advice. An incorrect cut of the trace could render the Pinecil non-working.
+
+Background: a simple user modification to the PCB on _some models_ of original V1 allows it to safely use DC barrel 24V by cutting a trace line to the Vbus which held it back to 21V. You can check whether your Pinecil V1 needs the update or can benefit from it by using a hidden trick in the PD debug menu.
+
+- Follow instructions above to enter the PD Debug menu.
+- After a few seconds or after PD negotiates (state above 5) it will show `[PD No VBus]` if it is not needed (i.e., late model V1). Alternately, if it shows `[VBus]`, then the mod has not been done and there is still a connection to the Vbus (the Vbus connection limits you to 21V until you do the mod).
+- If you need to do the mod, then follow the instructions/links below which have photos. Careful to only cut the trace and nothing else.
+- Then use the PD debug menu again to check for `[PD No Vbus]` before attaching any 24V PSU to the DC barrel. If you do not get the message, then try cutting the trace a little deeper or using alcohol to clear the gap of copper dust. Then check PD messages again. If you need advice/tips, join the Pine64 chat room. 
+
+The mod method is shown in the [February 2022 PINE64 community updates](https://www.pine64.org/2022/02/15/february-update-chat-with-the-machine/). Early Pinecil V1 models required cutting a trace to achieve 24V safety with DC barrel PSU. Late model V1 made sometime in 2022 came with `[No Vbus]` already displayed, and no mod is required.
+
+| Pinecil V2 model released Aug. 2, 2022 is an overhaul of the PCB with all relevant components capable of 28V. V2 requires no mods to support the use of 24V DC Barrel jack charger. |
+:--------
 
-First page shows the PD negotiation stage number; which can be used for diagnosing if PD is not working.
-After a few seconds or after PD negotiates (state above 5) it will show "No VBus" if the VBus mod is performed or "VBus" if the mod has not been done.
 
-Once negotiation is complete; the other screens will show the advertised readings for voltage and current of the proposals.

Documentation/Development.md

@@ -94,11 +94,13 @@ To build a release instead, run the `build.sh` script. This will update translat
 ## Updating languages
 
 To update the language translation files and their associated font maps, execute the `make_translation.py` code from the `Translations` directory.
-If you edit the translation definitions or the english translation, please also run `gen_menu_docs.py` to update the settings menu documentation automatically.
+If you edit the translation definitions or the English translation, please also run `gen_menu_docs.py` to update the settings menu documentation automatically.
 
-## Building Pinecil
+## Building Pinecil V1
 
 I highly recommend using the command line tools and using Docker to run the compiler.
-It's a bit more fussy on setup than the STM tooling, and this is by far the easiest way.
+It's a bit fussier on setup than the STM tooling, and this is by far the easiest way.
 If you _need_ an IDE I have used [Nuclei's IDE](https://nucleisys.com/download.php).
 Follow the same idea as the STM Cube IDE notes above.
+
+## Building Pinecil V2

Documentation/Flashing.md

@@ -1,232 +0,0 @@
-# Flashing / Upgrading your iron
-
-## Downloading source file
-
-In the development of this firmware, there are three _types_ of firmware released.
-These are the "Main" stable releases, which generally have high confidence in being bug free.
-Release candidates are released slightly more often, and these are generally perfectly fine for everyday use. These are released early to allow for translation checking and for wonderful people to help spot bugs and regressions.
-Finally, there are the "mainline" builds, which are built from the main git branch.
-These are built on every change and can be found on the Actions tab (see below).
-
-### Main release
-
-Main releases are made to the [releases page](https://github.com/Ralim/IronOS/releases).
-Download the zip file that matches your model of soldering iron, and extract it.
-Select the appropriate file type for your unit, in general Miniware devices need `.hex` and Pinecil needs `.dfu`.
-Flash according to details below
-
-### Bleeding edge / latest
-
-For the _latest_ code, you will need to download the zip file from the artifacts page on the build for what you want.
-Head to the [Actions](https://github.com/Ralim/IronOS/actions) page and then select the run for the appropriate branch you would like.
-In general you probably want `master`.
-
-Once you click on a run, scroll down to the "Artifacts" section and then click on your model to download a zip file.
-Then this works the same as a production release (use the correct file).
-
-# Miniware devices (TS100, TS80, TS80P & MHP30)
-
-This is completely safe, but if it goes wrong just put the `.hex` file from the official website ([TS100](https://www.minidso.com/forum.php?mod=viewthread&tid=868&extra=page%3D1), [TS80](https://www.minidso.com/forum.php?mod=viewthread&tid=3202&extra=page%3D1), [TS80P](https://www.minidso.com/forum.php?mod=viewthread&tid=4070&extra=page%3D1) & [MHP30](https://www.minidso.com/forum.php?mod=viewthread&tid=4385&extra=page%3D1)) onto the unit and you're back to the old firmware. Downloads for the `.hex` files to flash are available on the [releases page.](https://github.com/Ralim/IronOS/releases) The file you want is called _(MODEL)\_EN.hex_ unless you want the translations, they are (MODEL)\__language short name_.hex. Where (MODEL) is either TS100 or TS80.
-
-Officially the bootloader on the devices only works under Windows (use the built-in File Explorer, as alternative file managers or copy handlers like Teracopy will fail). However, users have reported that it does work under Mac, and can be made to work under Linux _sometimes_. Details over on the [wiki page](https://github.com/Ralim/ts100/wiki/Upgrading-Firmware).
-
-1. Hold the button closest to the tip (MHP30 the left button on the back), and plug in the USB to the computer.
-2. The unit will appear as a USB drive. ( Screen will say `DFU` on it.)
-3. Drag the `.hex` file onto the USB drive.
-4. The unit will disconnect and reconnect.
-5. The filename will have changed to end in *.RDY* or *.ERR*
-6. If it ends with *.RDY* you're done! Otherwise, something went wrong.
-7. If it didn't work the first time, try copying the file again without disconnecting the device, often it will work on the second shot.
-8. Disconnect the USB and power up the device. You're good to go.
-
-For the more adventurous out there, you can also load this firmware onto the device using an SWD programmer.
-
-On the bottom of the MCU riser PCB, there are 4 pads for programming. On v2.51A PCB revision `USB_D+` is shorted to `SWDIO` and `USB_D-` is shorted to `SWCLK` so debugging works without disassembly (attach while staying in the bootloader). Installing [dapboot from eDesignOSS](https://github.com/eDesignOSS/dapboot) (`make TARGET=TS100 -C src`) is recommended as it allows reliable flashing of binary files with [dfu-util](http://dfu-util.sourceforge.net/).
-
-There is a complete device flash backup included in this repository. (Note this includes the bootloader, so will need an SWD programmer to load onto the unit).
-
-For the TS80 the SWD pins are used for the QC negotiation, so you can actually connect to the SWD power via the USB connector.
-
-## Mac
-
-sgr1ff1n (Shane) commented in [issue 11](https://github.com/Ralim/ts100/issues/11) that upgrading worked on their Mac as per normal:
-
-> I just wanted to say that I was able to update the firmware on my ts100 from the stock version to 1.08 found in this repository using my Mac. I simply followed the same steps however through Finder. I have a MacBook Pro (13-inch, Mid 2012) running Sierra 10.12.4 (16E195).
-
-## Linux
-
-While in the past there were reports of unreliable upgrades, the consensus in [issue 11](https://github.com/Ralim/ts100/issues/11) is that things work mostly as expected in Linux.
-
-@awigen has contributed a script [flash_ts100_linux.sh](https://raw.githubusercontent.com/Ralim/ts100/master/Flashing/flash_ts100_linux.sh) that works on Ubuntu 16.04 as well as other distros.
-
-If you want to do it manually (or if the script does not work for some reason) the general procedure is the same as for Windows, the differences are in the way to mount the unit and copy the firmware.
-Remember that after flashing, the firmware filename will have changed to end in `.RDY` or `.ERR` or `.NOT` and only `.RDY` means the flashing was successful!
-
-- The unit has to be mounted as `msdos` type (thanks @balrog-kun for having spotted it). You may disable automount, but unmounting the automounted drive and remounting as `msdos` works fine. You do not need to turn off automounting, but you do need to unmount the device with `umount`.
-- It is recommended to use an all-caps filename for the firmware, even if successful flashing were done with lower case names.
-- Avoid USB hubs, plug directly in your computer.
-- If it fails, try again several times without unplugging. Just let it remount.
-
-Example, to be run as root, once the unit has been plugged in DFU mode and auto-mounted:
-
-```bash
-FW=ts100.hex
-unset NAME
-eval $(lsblk -P -p -d --output NAME,MODEL|grep "DFU[ _]Disk")
-[ -z ${NAME+x} ] && exit 1  # Could not find DFU device
-umount "$NAME"
-mkdir /tmp/mntdfu
-mount -t msdos "$NAME" /tmp/mntdfu
-cp "$FW" "/tmp/mntdfu/$(basename $FW|tr a-z A-Z)"
-sync
-umount /tmp/mntdfu
-rmdir /tmp/mntdfu
-```
-
-Device will reboot and automount will rerun if not disabled.
-Check the extension of your firmware, it should be `.RDY` now.
-
-
-# Pinecil (Pine64)
-
-- The MCU used in Pinecil supports usb-dfu. Reference [Pinecil Wiki](https://wiki.pine64.org/wiki/Pinecil).
-- Recommended Updater: the [Pine64 Updater](https://github.com/pine64/pinecil-firmware-updater/releases), is an easy-to-use GUI app. It is fast and works in several types of OS, i.e. Windows/Mac. It will automatically fetch the newest stable version of IronOS from Github.
-- Troubleshooting: if you have issues using the Pine64 Updater or your install fails, please go to troubleshooting tips below.
-- Community chat: if troubleshooting doesn't work, then join the Pine64 > Pinecil channel. There are knowledgeable members in Discord/Telegram/Matrix. Discord has a bridge bot connection to Telegram and Matrix so that all pine volunteers/members can see advice for Pinecil and related items or just get tips on which Power supply to purchase.
-- One advantage of Pinecil is that you can not permanently damage it doing a firmware update (because DFU is in ROM); an update could render Pinecil temporarily inoperable if you flash an invalid firmware. But no worries, simply re-flashing with a working firmware copy will fix everything.
-- USB-C cable is required to do an update. Generally, all USB controllers work, but some hubs have issues so it is preferred to avoid USB hubs for updates.
-- Alternate Update Methods: if your OS is not currently supported by the [Updater](https://github.com/pine64/pinecil-firmware-updater/releases) or it does not meet your needs, i.e., you want to install a beta version, the below manual methods may be used. 
-
-## Linux and Mac
-
-### Steps
-
-⛔  Do not use the DC power jack while updating firmware or you may destroy your PC. ⛔
-
-1. Download and extract the firmware package from Github [IronOS Releases](https://github.com/Ralim/IronOS/releases).
-2. Highly recommend updating `dfu-util` to the newest version.
-3. Enter DFU mode: press and hold (-) button at the back of the iron (do not release).
-4. Connect USB to PC, and USB-C to back of Pinecil, keep holding (-) button down.
-5. The screen will stay **black/off** to indicate the Pinecil is in DFU mode. This is normal.
-6. Once the USB cable is connected at two ends, wait 10 seconds more, then release the (-) button.
-7. Using `dfu-util` you can flash the firmware using a command line like this:
-
-```
-dfu-util -D Pinecil_EN.dfu
-```
-
-Choose the file name from the folder with the appropriate 2-letter country code for your chosen language (i.e, EN = English).
-
-### Troubleshooting:
-- If you get a message stating that `More than one DFU capable USB device found!` when running the above command you probably have an old version of `dfu-util` installed. Might be worth updating. You can still install on the old version, but you will have to specify which DFU interface to flash to. Running the command `dfu-util -l` will show you if there are several DFU devices detected. Example:
-```
-Found DFU: [28e9:0189] ver=0100, devnum=48, cfg=1, intf=0, path="1-1", alt=1, name="@Option Bytes  /0x1FFFF800/01*016Be", serial="??"
-Found DFU: [28e9:0189] ver=0100, devnum=48, cfg=1, intf=0, path="1-1", alt=0, name="@Internal Flash  /0x08000000/128*001Kg", serial="??"
-```
-In this example we see that more than one part of the Pinecil is detected as a DFU interface and we need to specify which one we want to flash to. We want the `Internal Flash` so in this case we can use `alt=0` to identify which interface to target. The command would then look like this:
-```
-dfu-util -D Pinecil_EN.dfu -a 0
-```
-- Note: if you use an older release of `dfu-util` and do not see `alt=0, name="@Internal Flash  /0x08000000/128*001Kg"` when running `dfu-util -l` you likely will not be able to update without first updating 'dfu-util'.
-- If your update is crashing part-way into the update, there is sometimes an issue with older/fussy USB controllers (they can show up/disappear/then show up again)
-    - Try a direct connection to the USB port, do not use a USB hub, and use shorter cable. If possible pick a port connected to the main board.
-    - Switch to a different PC/Laptop and use different ports. USB-C ports are recommended but some have also reported having a fussy C port.
-    - Hold down the (-) button for the entire firmware update, do not release until near the end.
-- `DC Low` message: a pc/laptop can not fully power pinecil, it generally can only get 5 V (non-PD) to communicate for firmware updates and Pinecil will report 'DC Low'. This is normal.
-
-
-## Windows
-
-Two Options for Windows
-
-### Option 1: use command line
-
-### Steps
-
-⛔  Do not use the DC power jack while updating firmware or you may destroy your PC. ⛔
-
-1. Using command line `dfu-util` is similar to above for Linux / Mac.
-2. Highly recommend updating `dfu-util` to the newest version.
-3. Download and extract the firmware package from Github [IronOS Releases](https://github.com/Ralim/IronOS/releases).
-4. Enter DFU mode: press and hold (-) button at the back of the iron (do not release).
-5. Connect USB to PC, and USB-C to the back of Pinecil, keep holding (-) button down.
-6. Screen will stay **black/off** to indicate the Pinecil is in DFU mode. This is normal.
-7. After the USB cable is connected at both ends, wait ~10 seconds more, then release the (-) button.
-8. Open PowerShell or Command window.
-9. Change to the directory of the unzipped firmware files
-10. Using `dfu-util,`  flash the firmware using a command like this:
-
-```
-dfu-util -D Pinecil_EN.dfu
-```
-  - If you have errors, see Troubleshooting [above](/Documentation/Flashing.md#troubleshooting).
-
-
-### Option 2: use the gui tool from chip vendor
-
-### Steps
-
-⛔  Do not use the DC power jack while updating firmware or you may destroy your PC. ⛔
-
-1. If you are uncomfortable with the command line, then this chip vendor supplied gui tool/drivers is an option.
-2. Download and extract the firmware package from Github [IronOS Releases](https://github.com/Ralim/IronOS/releases).
-3. Download both the `GD32 MCU DFU TOOL` and the `GD32 Dfu Drivers`.
-   - GD32 DFU Tool [here](http://www.gd32mcu.com/en/download?kw=GD32+MCU+Dfu+Tool&lan=en). If the link breaks, search for "GD32 MCU Dfu Tool" at this [link](http://www.gd32mcu.com/en/download/).
-   - GD32 DFU Drivers [here](http://www.gd32mcu.com/en/download?kw=GD32+Dfu+Drivers&lan=en). If the link breaks, search for "GD32 Dfu Drivers" at this [link](http://www.gd32mcu.com/en/download/).
-   - Check properties of both downloads, tick Unblock if needed, then Unzip
-4. Install the drivers and the GD32 DFU tool (ignore prompts to update the tool).
-5. Enter DFU mode: press and hold (-) button at the back of Pinecil (do not release).
-6. Connect Pinecil to a PC via USB cable (do not release the (-) yet).
-7. Screen will stay **black/off** to indicate the Pinecil is in DFU mode. This is normal.
-8. You may hear a beep from Windows as it connects to Pinecil in DFU mode.
-9. If you see windows notification that it `does not recognize Usb device`, then you didn't connect, repeat step 3-8.
-10. Open the GD32 DFU Tool (ignore prompts to update tool).
-11. At the top of the DFU tool, you should see `GD DFU DEVICE 1` appear if you successfully connected Pinecil.
-12. If DFU Device box at top is blank, then Pinecil is not connected in DFU mode, repeat steps 3-11.
-13. If it has been more than 10 seconds since you connected the USB cable, Release the (-) button. (don't use Upload from Device section)
-14. Select `Download to device` > Open > Browse to folder dyou unziped in step 2.  
-15. Select the `hex` file for language. English is  Pinecil_EN.hex , tick `Verify after download`.
-16. Click `OK` at bottom. After a few minutes you will see 0-100%,  Download successfully!  Click `Leave DFU` at the top. 
-17. Disconnect pinecil cable from PC, plug it into a power supply.
-18. Do not need to press any buttons, a new screen should appear.
-19. To confirm upgrade, hold the minus (-) button down for a few seconds, it then shows new firmware version v2.xx.x....date
-
- - If you have errors, see Troubleshooting [above](/Documentation/Flashing.md#troubleshooting).
- 
-
-
-## FAQ
-
-#### [Miniware] The file is showing up with the extension `.ERR`
-
-This can occur during the programming process if any of the checks in the bootloader fail. This is often triggered by anti-virus software or using a non-Windows host OS.
-
-First, try just copying the file a second time.
-
-1. Attach the iron in DFU mode.
-2. Copy the `.hex` file to the device.
-3. The device disconnects and connects with the `.ERR` file.
-4. Copy the same `.hex` file again **⛔ DO NOT TRY AND DELETE THE OLD ONE ⛔**.
-5. The device will disconnect and reconnect again.
-6. The device _should_ now have the `.RDY` file.
-7. You're done.
-
-If this fails and you are on Mac or Linux reading the wiki page about programming can help. There is also a very long issue thread going through all of the different attempts around this too.
-
-If you are on Windows, it's often best to try another computer (friends, work, partners etc).
-
-#### [Miniware] Device randomly disconnects or does not show up in DFU mode
-
-1. Check if the USB cable you are using has the data pins; test it on another device. There are a surprisingly large number of usb-micro cables that are power _only_.
-
-2. Try other USB ports. Often different USB controllers will interact with the units differently due to design quirks in the miniware design.
-
-### [Miniware] Alternative bootloader
-
-If you are an advanced user, and you have used `usb-dfu` tools before, or you would like to learn; there is an alternative bootloader for these irons.
-This will **NOT** show up as a USB storage drive, but instead show up using a standard DFU protocol device. You can then use dfu tools or GUI's to upgrade the iron using the `.bin` files that are posted to the releases page.
-
-To change to dapboot based alternative bootloader, you need to flash the hex file from [here](https://github.com/eDesignOSS/ts100-bl-flasher/releases).
-`ts100-stockbl.hex` will reflash the stock bootloader, `ts100-dapboot.hex` will flash the new dapboot based usb bootloader.
-
-Note that this is only recommended for users who know what they are doing. If you don't understand how this works, please don't flash this.

Documentation/Flashing/MHP30.md

@@ -0,0 +1,120 @@
+# Flashing / Upgrading your iron
+
+## Downloading source file
+
+In the development of this firmware, there are three _types_ of firmware released.
+These are the "Main" stable releases, which generally have high confidence in being bug free.
+Release candidates are released slightly more often, and these are generally perfectly fine for everyday use. These are released early to allow for translation checking and for wonderful people to help spot bugs and regressions.
+Finally, there are the "mainline" builds, which are built from the main git branch.
+These are built on every change and can be found on the Actions tab (see below).
+
+### Main release
+
+Main releases are made to the [releases page](https://github.com/Ralim/IronOS/releases).
+Download the zip file that matches your model of soldering iron and extract it.
+Select the appropriate file type for your unit, in general Miniware devices need `.hex` and Pinecil needs `.dfu`.
+Flash according to details below
+
+### Bleeding edge / latest
+
+For the _latest_ code, you will need to download the zip file from the artifacts page on the build for what you want.
+Head to the [Actions](https://github.com/Ralim/IronOS/actions) page and then select the run for the appropriate branch you would like.
+In general you probably want `master`.
+
+Once you click on a run, scroll down to the "Artifacts" section and then click on your model to download a zip file.
+Then this works the same as a production release (use the correct file).
+
+# MHP30
+
+This is completely safe, but if it goes wrong just put the `.hex` file from the official website ([MHP30](https://www.minidso.com/forum.php?mod=viewthread&tid=4385&extra=page%3D1) onto the unit and you're back to the old firmware. Downloads for the `.hex` files to flash are available on the [releases page.](https://github.com/Ralim/IronOS/releases) The file you want is called MHP30.zip. Inside the zip file (make sure to extract the file before flashing with it) will be a file called `MHP30_{Language-Code}.hex`.
+
+Officially the bootloader on the devices only works under Windows (use the built-in File Explorer, as alternative file managers or copy handlers like Teracopy will fail). However, users have reported that it does work under Mac, and can be made to work under Linux _sometimes_. Details over on the [wiki page](https://github.com/Ralim/IronOS/wiki/Upgrading-Firmware).
+
+1. Hold the button closest to the tip (MHP30 the left button on the back), and plug in the USB to the computer.
+2. The unit will appear as a USB drive. (Screen will say `DFU` on it.)
+3. Drag the `.hex` file onto the USB drive.
+4. The unit will disconnect and reconnect.
+5. The filename will have changed to end in _.RDY_ or _.ERR_
+6. If it ends with _.RDY_ you're done! Otherwise, something went wrong.
+7. If it didn't work the first time, try copying the file again without disconnecting the device, often it will work on the second shot.
+8. Disconnect the USB and power up the device. You're good to go.
+
+For the more adventurous out there, you can also load this firmware onto the device using an SWD programmer, for easier installation follow the guide at the end of this document.
+
+On the USB-C port, `USB_D+` is shorted to `SWDIO` and `USB_D-` is shorted to `SWCLK` so debugging works without disassembly (attach while staying in the bootloader). Installing [IronOS-dfu](https://github.com/Ralim/IronOS-dfu) is recommended as it allows reliable flashing of binary files with [dfu-util](http://dfu-util.sourceforge.net/).
+
+Noting that for the MHP30 the stock firmware checks a checksum at the end of the first 8k that has to be valid or else it goes into "demo mode".
+
+## Mac
+
+sgr1ff1n (Shane) commented in [issue 11](https://github.com/Ralim/IronOS/issues/11) that upgrading worked on their Mac as per normal:
+
+> I just wanted to say that I was able to update the firmware on my ts100 from the stock version to 1.08 found in this repository using my Mac. I simply followed the same steps however through Finder. I have a MacBook Pro (13-inch, Mid 2012) running Sierra 10.12.4 (16E195).
+
+## Linux
+
+While in the past there were reports of unreliable upgrades, the consensus in [issue 11](https://github.com/Ralim/IronOS/issues/11) is that things work mostly as expected in Linux.
+
+@awigen has contributed a script [flash_ts100_linux.sh](https://raw.githubusercontent.com/Ralim/IronOS/master/Flashing/flash_ts100_linux.sh) that works on Ubuntu 16.04 as well as other distros.
+
+If you want to do it manually (or if the script does not work for some reason) the general procedure is the same as for Windows, the differences are in the way to mount the unit and copy the firmware.
+Remember that after flashing, the firmware filename will have changed to end in `.RDY` or `.ERR` or `.NOT` and only `.RDY` means the flashing was successful!
+
+- The unit has to be mounted as `msdos` type (thanks @balrog-kun for having spotted it). You may disable automount, but unmounting the automounted drive and remounting as `msdos` works fine. You do not need to turn off automounting, but you do need to unmount the device with `umount`.
+- It is recommended to use an all-caps filename for the firmware, even if successful flashing were done with lower case names.
+- Avoid USB hubs, plug directly in your computer.
+- If it fails, try again several times without unplugging. Just let it remount.
+
+Example, to be run as root, once the unit has been plugged in DFU mode and auto-mounted:
+
+```bash
+FW=ts100.hex
+unset NAME
+eval $(lsblk -P -p -d --output NAME,MODEL|grep "DFU[ _]Disk")
+[ -z ${NAME+x} ] && exit 1  # Could not find DFU device
+umount "$NAME"
+mkdir /tmp/mntdfu
+mount -t msdos "$NAME" /tmp/mntdfu
+cp "$FW" "/tmp/mntdfu/$(basename $FW|tr a-z A-Z)"
+sync
+umount /tmp/mntdfu
+rmdir /tmp/mntdfu
+```
+
+Device will reboot and automount will rerun if not disabled.
+Check the extension of your firmware, it should be `.RDY` now.
+
+## FAQ
+
+#### The file is showing up with the extension `.ERR`
+
+This can occur during the programming process if any of the checks in the bootloader fail. This is often triggered by anti-virus software or using a non-Windows host OS.
+
+First, try just copying the file a second time.
+
+1. Attach the iron in DFU mode.
+2. Copy the `.hex` file to the device.
+3. The device disconnects and connects with the `.ERR` file.
+4. Copy the same `.hex` file again **⛔ DO NOT TRY AND DELETE THE OLD ONE ⛔**.
+5. The device will disconnect and reconnect again.
+6. The device _should_ now have the `.RDY` file.
+7. You're done.
+
+If this fails and you are on Mac or Linux reading the wiki page about programming can help. There is also a very long issue thread going through all of the different attempts around this too.
+
+If you are on Windows, it's often best to try another computer (friends, work, partners etc.).
+
+#### Device randomly disconnects or does not show up in DFU mode
+
+1. Check if the USB cable you are using has the data pins; test it on another device. There are a surprisingly large number of micro-USB cables that are power _only_.
+
+2. Try other USB ports. Often different USB controllers will interact with the units differently due to design quirks in the Miniware design.
+
+### Alternative bootloader
+
+If you are an advanced user, and you have used `usb-dfu` tools before, or you would like to learn; there is an alternative bootloader for these irons.
+This will **NOT** show up as a USB storage drive, but instead show up using a standard DFU protocol device. You can then use dfu tools or GUIs to upgrade the iron using the `.bin` files that are posted to the releases page.
+
+To install this alternative bootloader, follow the instructions [here](https://github.com/Ralim/IronOS-dfu/blob/mainline/docs/Bootloader.md).
+
+Note that this is only recommended for users who know what they are doing. If you don't understand how this works, please don't flash this.

Documentation/Flashing/Pinecil V1.md

@@ -0,0 +1,159 @@
+# Flashing / Upgrading your iron
+
+## Downloading source file
+
+In the development of this firmware, there are three _types_ of firmware released.
+These are the "Main" stable releases, which generally have high confidence in being bug free.
+Release candidates are released slightly more often, and these are generally perfectly fine for everyday use. These are released early to allow for translation checking and for wonderful people to help spot bugs and regressions.
+Finally, there are the "mainline" builds, which are built from the main git branch.
+These are built on every change and can be found on the Actions tab (see below).
+
+### Main release
+
+Main releases are made to the [releases page](https://github.com/Ralim/IronOS/releases).
+Download the zip file that matches your model of soldering iron and extract it.
+Select the appropriate file type for your unit, in general Miniware devices need `.hex` and Pinecil needs `.dfu`.
+Flash according to details below
+
+### Bleeding edge / latest
+
+For the _latest_ code, you will need to download the zip file from the artifacts page on the build for what you want.
+Head to the [Actions](https://github.com/Ralim/IronOS/actions) page and then select the run for the appropriate branch you would like.
+In general you probably want `master`.
+
+Once you click on a run, scroll down to the "Artifacts" section and then click on your model to download a zip file.
+Then this works the same as a production release (use the correct file).
+
+# Pinecil V1
+
+- The MCU used in Pinecil supports usb-dfu. Reference [Pinecil Wiki](https://wiki.pine64.org/wiki/Pinecil).
+- Recommended Updater: the [Pine64 Updater](https://github.com/pine64/pinecil-firmware-updater/releases), is an easy-to-use GUI app. It is fast and works in several types of OS, i.e. Windows/Mac. It will automatically fetch the newest stable version of IronOS from GitHub.
+- Troubleshooting: if you have issues using the Pine64 Updater or your install fails, please go to troubleshooting tips below.
+- Community chat: if troubleshooting doesn't work, then join the Pine64 > Pinecil channel. There are knowledgeable members in Discord/Telegram/Matrix. Discord has a bridge bot connection to Telegram and Matrix so that all pine volunteers/members can see advice for Pinecil and related items or just get tips on which Power supply to purchase.
+- One advantage of Pinecil is that you cannot permanently damage it doing a firmware update (because DFU is in ROM); an update could render Pinecil temporarily inoperable if you flash an invalid firmware. But no worries, simply re-flashing with a working firmware copy will fix everything.
+- USB-C cable is required to do an update. Generally, all USB controllers work, but some hubs have issues, so it is preferred to avoid USB hubs for updates.
+- Alternate Update Methods: if your OS is not currently supported by the [Updater](https://github.com/pine64/pinecil-firmware-updater/releases) or it does not meet your needs, i.e., you want to install a beta version, the below manual methods may be used.
+
+## Linux and Mac
+
+### Steps
+
+⛔ Do not use the DC barrel jack while updating firmware or you may destroy your PC. ⛔
+
+1. Highly recommend updating `dfu-util` to the newest version before starting.
+2. Download and extract the firmware package from GitHub [IronOS Releases](https://github.com/Ralim/IronOS/releases).
+3. Enter DFU mode: press and hold (`-`) button at the back of the iron before you connect the USB-C cable.
+4. Connect USB to PC, and USB-C to back of Pinecil, keep holding (`-`) button down.
+5. Once the USB cable is connected at two ends, wait ~10 seconds more, then release the (`-`) button.
+6. The screen will stay **black/off** to indicate the Pinecil is in DFU mode. This is normal.
+7. Using `dfu-util` you can flash the firmware using a command line like this:
+
+```
+dfu-util -D Pinecil_EN.dfu
+```
+
+Choose the file name from the folder with the appropriate 2-letter country code for your chosen language (i.e., EN = English).
+
+### Troubleshooting:
+
+- If you get a message stating that `More than one DFU capable USB device found!` when running the above command you probably have an old version of `dfu-util` installed. Might be worth updating. You can still install on the old version, but you will have to specify which DFU interface to flash to. Running the command `dfu-util -l` will show you if there are several DFU devices detected. Example:
+
+```
+Found DFU: [28e9:0189] ver=0100, devnum=48, cfg=1, intf=0, path="1-1", alt=1, name="@Option Bytes  /0x1FFFF800/01*016Be", serial="??"
+Found DFU: [28e9:0189] ver=0100, devnum=48, cfg=1, intf=0, path="1-1", alt=0, name="@Internal Flash  /0x08000000/128*001Kg", serial="??"
+```
+
+In this example we see that more than one part of the Pinecil is detected as a DFU interface and we need to specify which one we want to flash to. We want the `Internal Flash` so in this case we can use `alt=0` to identify which interface to target. The command would then look like this:
+
+```
+dfu-util -D Pinecil_EN.dfu -a 0
+```
+
+- Note: if you use an older release of `dfu-util` and do not see `alt=0, name="@Internal Flash /0x08000000/128*001Kg"` when running `dfu-util -l` you likely will not be able to update without first updating 'dfu-util'.
+- If your update is crashing part-way into the update, there is sometimes an issue with older/fussy USB controllers (they can show up/disappear/then show up again)
+  - Try a direct connection to the USB port, do not use a USB hub, and use shorter cable. If possible, pick a port connected to the main board.
+  - Switch to a different PC/Laptop and use different ports. USB-C ports are recommended but some have also reported having a fussy C port.
+  - Hold down the (-) button for the entire firmware update, do not release until near the end.
+- `DC Low` message: a pc/laptop cannot fully power Pinecil, it generally can only get 5 V (non-PD) to communicate for firmware updates and Pinecil will report 'DC Low'. This is normal.
+- If `dfu-util` aborts with an error like
+  ```
+  dfu-util: Cannot open DFU device 28e9:0189 found on devnum 42 (LIBUSB_ERROR_IO)
+  ```
+  and `dmesg` reports USB errors like these
+  ```
+  kernel: usb 1-1: reset full-speed USB device number 42 using xhci_hcd
+  kernel: usb 1-1: device descriptor read/64, error -71
+  kernel: usb 1-1: device descriptor read/64, error -71
+  kernel: usb 1-1: reset full-speed USB device number 42 using xhci_hcd
+  kernel: usb 1-1: device descriptor read/64, error -71
+  kernel: usb 1-1: device descriptor read/64, error -71
+  kernel: usb 1-1: reset full-speed USB device number 42 using xhci_hcd
+  kernel: usb 1-1: Device not responding to setup address.
+  kernel: usb 1-1: Device not responding to setup address.
+  kernel: usb 1-1: device not accepting address 42, error -71
+  ```
+  then try to disable USB autosuspend.
+  This can be done with a set of udev rules specifically for the Pinecil:
+  ```udev
+  SUBSYSTEM=="usb", ATTR{idVendor}=="28e9", ATTR{idProduct}=="0189", MODE:="0660"
+  SUBSYSTEM=="usb", ATTR{idVendor}=="28e9", ATTR{idProduct}=="0189", GROUP="plugdev"
+  SUBSYSTEM=="usb", ATTR{idVendor}=="28e9", ATTR{idProduct}=="0189", TEST=="power/control", ATTR{power/control}="on"
+  ```
+
+## Windows
+
+Two Options for Windows
+
+### Option 1: use command line
+
+### Steps
+
+⛔ Do not use the DC barrel jack while updating firmware or you may destroy your PC. ⛔
+
+1. Using command line `dfu-util` is similar to above for Linux / Mac.
+2. Highly recommend updating `dfu-util` to the newest version.
+3. Download and extract the firmware package from GitHub [IronOS Releases](https://github.com/Ralim/IronOS/releases).
+4. Enter DFU mode: press and hold (-) button at the back of the iron (do not release).
+5. Connect USB to PC, and USB-C to the back of Pinecil, keep holding (-) button down.
+6. Screen will stay **black/off** to indicate the Pinecil is in DFU mode. This is normal.
+7. After the USB cable is connected at both ends, wait ~10 seconds more, then release the (-) button.
+8. Open PowerShell or Command window.
+9. Change to the directory of the unzipped firmware files
+10. Using `dfu-util,` flash the firmware using a command like this:
+
+```
+dfu-util -D Pinecil_EN.dfu
+```
+
+- If you have errors, see Troubleshooting above.
+
+### Option 2: use the GUI tool from chip vendor
+
+### Steps
+
+⛔ Do not use the DC barrel jack while updating firmware or you may destroy your PC. ⛔
+
+1. If you are uncomfortable with the command line, then this chip vendor supplied GUI tool/drivers is an option.
+2. Download and extract the firmware package from GitHub [IronOS Releases](https://github.com/Ralim/IronOS/releases).
+3. Download both the `GD32 MCU DFU TOOL` and the `GD32 Dfu Drivers`.
+   - GD32 DFU Tool [here](http://www.gd32mcu.com/en/download?kw=GD32+MCU+Dfu+Tool&lan=en). If the link breaks, search for "GD32 MCU Dfu Tool" at this [link](http://www.gd32mcu.com/en/download/).
+   - GD32 DFU Drivers [here](http://www.gd32mcu.com/en/download?kw=GD32+Dfu+Drivers&lan=en). If the link breaks, search for "GD32 Dfu Drivers" at this [link](http://www.gd32mcu.com/en/download/).
+   - Check properties of both downloads, tick Unblock if needed, then Unzip
+4. Install the drivers and the GD32 DFU tool (ignore prompts to update the tool).
+5. Enter DFU mode: press and hold (`-`) button at the back of Pinecil (do not release).
+6. Connect Pinecil to a PC via USB cable (do not release the (`-`) yet).
+7. Screen will stay **black/off** to indicate the Pinecil is in DFU mode. This is normal.
+8. You may hear a beep from Windows as it connects to Pinecil in DFU mode.
+9. If you see windows notification that it `does not recognize USB device`, then you didn't connect, repeat step 3-8.
+10. Open the GD32 DFU Tool (ignore prompts to update tool).
+11. At the top of the DFU tool, you should see `GD DFU DEVICE 1` appear if you successfully connected Pinecil.
+12. If DFU Device box at top is blank, then Pinecil is not connected in DFU mode, repeat steps 3-11.
+13. If it has been more than 10 seconds since you connected the USB cable, Release the (`-`) button. (don't use Upload from Device section)
+14. Select `Download to device` > Open > Browse to folder you unzipped in step 2.
+15. Select the `hex` file for language. English is Pinecil_EN.hex , tick `Verify after download`.
+16. Click `OK` at bottom. After a few minutes you will see 0-100%, Download successfully! Click `Leave DFU` at the top.
+17. Disconnect Pinecil cable from PC, plug it into a power supply.
+18. Do not need to press any buttons, a new screen should appear.
+19. To confirm upgrade, hold the minus (`-`) button down for a few seconds, it then shows new firmware version v2.xx.x....date
+
+- If you have errors, see Troubleshooting above.

Documentation/Flashing/Pinecil V2.md

@@ -0,0 +1,32 @@
+# Flashing / Upgrading your iron
+
+## Downloading source file
+
+In the development of this firmware, there are three _types_ of firmware released.
+These are the "Main" stable releases, which generally have high confidence in being bug free.
+Release candidates are released slightly more often, and these are generally perfectly fine for everyday use. These are released early to allow for translation checking and for wonderful people to help spot bugs and regressions.
+Finally, there are the "mainline" builds, which are built from the main git branch.
+These are built on every change and can be found on the Actions tab (see below).
+
+### Main release
+
+Main releases are made to the [releases page](https://github.com/Ralim/IronOS/releases).
+Download the zip file that matches your model of soldering iron and extract it.
+Select the appropriate file type for your unit, in general Miniware devices need `.hex` and Pinecil needs `.dfu`.
+Flash according to details below
+
+### Bleeding edge / latest
+
+For the _latest_ code, you will need to download the zip file from the artifacts page on the build for what you want.
+Head to the [Actions](https://github.com/Ralim/IronOS/actions) page and then select the run for the appropriate branch you would like.
+In general you probably want `master`.
+
+Once you click on a run, scroll down to the "Artifacts" section and then click on your model to download a zip file.
+Then this works the same as a production release (use the correct file).
+
+# Pinecil V2
+
+- The MCU in V2 is Bouffalo BL706 and does _not_ use usb-dfu for flashing as the previous MCU did.
+- The current firmware (2.18) is very fresh and no upgrade is available/needed.
+- When an update is released for V2, then IronOS will also include an update method to follow.
+- Background on the [BL706 chipset](https://lupyuen.github.io/articles/bl706)

Documentation/Flashing/TS100.md

@@ -0,0 +1,120 @@
+# Flashing / Upgrading your iron
+
+## Downloading source file
+
+In the development of this firmware, there are three _types_ of firmware released.
+These are the "Main" stable releases, which generally have high confidence in being bug free.
+Release candidates are released slightly more often, and these are generally perfectly fine for everyday use. These are released early to allow for translation checking and for wonderful people to help spot bugs and regressions.
+Finally, there are the "mainline" builds, which are built from the main git branch.
+These are built on every change and can be found on the Actions tab (see below).
+
+### Main release
+
+Main releases are made to the [releases page](https://github.com/Ralim/IronOS/releases).
+Download the zip file that matches your model of soldering iron and extract it.
+Select the appropriate file type for your unit, in general Miniware devices need `.hex` and Pinecil needs `.dfu`.
+Flash according to details below
+
+### Bleeding edge / latest
+
+For the _latest_ code, you will need to download the zip file from the artifacts page on the build for what you want.
+Head to the [Actions](https://github.com/Ralim/IronOS/actions) page and then select the run for the appropriate branch you would like.
+In general you probably want `master`.
+
+Once you click on a run, scroll down to the "Artifacts" section and then click on your model to download a zip file.
+Then this works the same as a production release (use the correct file).
+
+# TS100
+
+This is completely safe, but if it goes wrong just put the `.hex` file from the official website ([TS100](https://www.minidso.com/forum.php?mod=viewthread&tid=868&extra=page%3D1) onto the unit and you're back to the old firmware. Downloads for the `.hex` files to flash are available on the [releases page.](https://github.com/Ralim/IronOS/releases) The file you want is called TS100.zip. Inside the zip file (make sure to extract the file before flashing with it) will be a file called `TS100_{Language-Code}.hex`.
+
+Officially the bootloader on the devices only works under Windows (use the built-in File Explorer, as alternative file managers or copy handlers like Teracopy will fail). However, users have reported that it does work under Mac, and can be made to work under Linux _sometimes_. Details over on the [wiki page](https://github.com/Ralim/IronOS/wiki/Upgrading-Firmware).
+
+1. Hold the button closest to the tip (MHP30 the left button on the back), and plug in the USB to the computer.
+2. The unit will appear as a USB drive. (Screen will say `DFU` on it.)
+3. Drag the `.hex` file onto the USB drive.
+4. The unit will disconnect and reconnect.
+5. The filename will have changed to end in _.RDY_ or _.ERR_
+6. If it ends with _.RDY_ you're done! Otherwise, something went wrong.
+7. If it didn't work the first time, try copying the file again without disconnecting the device, often it will work on the second shot.
+8. Disconnect the USB and power up the device. You're good to go.
+
+For the more adventurous out there, you can also load this firmware onto the device using an SWD programmer, for easier installation follow the guide at the end of this document.
+
+On the bottom of the MCU riser PCB, there are 4 pads for programming. On v2.51A PCB revision `USB_D+` is shorted to `SWDIO` and `USB_D-` is shorted to `SWCLK` so debugging works without disassembly (attach while staying in the bootloader). Installing [IronOS-dfu](https://github.com/Ralim/IronOS-dfu) is recommended as it allows reliable flashing of binary files with [dfu-util](http://dfu-util.sourceforge.net/).
+
+On some newer TS100 units, the SWD pins are wired up to the USB pins, on older ones they are not sadly.
+
+## Mac
+
+sgr1ff1n (Shane) commented in [issue 11](https://github.com/Ralim/IronOS/issues/11) that upgrading worked on their Mac as per normal:
+
+> I just wanted to say that I was able to update the firmware on my ts100 from the stock version to 1.08 found in this repository using my Mac. I simply followed the same steps however through Finder. I have a MacBook Pro (13-inch, Mid 2012) running Sierra 10.12.4 (16E195).
+
+## Linux
+
+While in the past there were reports of unreliable upgrades, the consensus in [issue 11](https://github.com/Ralim/IronOS/issues/11) is that things work mostly as expected in Linux.
+
+@awigen has contributed a script [flash_ts100_linux.sh](https://raw.githubusercontent.com/Ralim/IronOS/master/Flashing/flash_ts100_linux.sh) that works on Ubuntu 16.04 as well as other distros.
+
+If you want to do it manually (or if the script does not work for some reason) the general procedure is the same as for Windows, the differences are in the way to mount the unit and copy the firmware.
+Remember that after flashing, the firmware filename will have changed to end in `.RDY` or `.ERR` or `.NOT` and only `.RDY` means the flashing was successful!
+
+- The unit has to be mounted as `msdos` type (thanks @balrog-kun for having spotted it). You may disable automount, but unmounting the automounted drive and remounting as `msdos` works fine. You do not need to turn off automounting, but you do need to unmount the device with `umount`.
+- It is recommended to use an all-caps filename for the firmware, even if successful flashing were done with lower case names.
+- Avoid USB hubs, plug directly in your computer.
+- If it fails, try again several times without unplugging. Just let it remount.
+
+Example, to be run as root, once the unit has been plugged in DFU mode and auto-mounted:
+
+```bash
+FW=ts100.hex
+unset NAME
+eval $(lsblk -P -p -d --output NAME,MODEL|grep "DFU[ _]Disk")
+[ -z ${NAME+x} ] && exit 1  # Could not find DFU device
+umount "$NAME"
+mkdir /tmp/mntdfu
+mount -t msdos "$NAME" /tmp/mntdfu
+cp "$FW" "/tmp/mntdfu/$(basename $FW|tr a-z A-Z)"
+sync
+umount /tmp/mntdfu
+rmdir /tmp/mntdfu
+```
+
+Device will reboot and automount will rerun if not disabled.
+Check the extension of your firmware, it should be `.RDY` now.
+
+## FAQ
+
+#### The file is showing up with the extension `.ERR`
+
+This can occur during the programming process if any of the checks in the bootloader fail. This is often triggered by anti-virus software or using a non-Windows host OS.
+
+First, try just copying the file a second time.
+
+1. Attach the iron in DFU mode.
+2. Copy the `.hex` file to the device.
+3. The device disconnects and connects with the `.ERR` file.
+4. Copy the same `.hex` file again **⛔ DO NOT TRY AND DELETE THE OLD ONE ⛔**.
+5. The device will disconnect and reconnect again.
+6. The device _should_ now have the `.RDY` file.
+7. You're done.
+
+If this fails and you are on Mac or Linux reading the wiki page about programming can help. There is also a very long issue thread going through all of the different attempts around this too.
+
+If you are on Windows, it's often best to try another computer (friends, work, partners etc.).
+
+#### Device randomly disconnects or does not show up in DFU mode
+
+1. Check if the USB cable you are using has the data pins; test it on another device. There are a surprisingly large number of micro-USB cables that are power _only_.
+
+2. Try other USB ports. Often different USB controllers will interact with the units differently due to design quirks in the Miniware design.
+
+### Alternative bootloader
+
+If you are an advanced user, and you have used `usb-dfu` tools before, or you would like to learn; there is an alternative bootloader for these irons.
+This will **NOT** show up as a USB storage drive, but instead show up using a standard DFU protocol device. You can then use dfu tools or GUIs to upgrade the iron using the `.bin` files that are posted to the releases page.
+
+To install this alternative bootloader, follow the instructions [here](https://github.com/Ralim/IronOS-dfu/blob/mainline/docs/Bootloader.md).
+
+Note that this is only recommended for users who know what they are doing. If you don't understand how this works, please don't flash this.

Documentation/Flashing/TS80(P).md

@@ -0,0 +1,118 @@
+# Flashing / Upgrading your iron
+
+## Downloading source file
+
+In the development of this firmware, there are three _types_ of firmware released.
+These are the "Main" stable releases, which generally have high confidence in being bug free.
+Release candidates are released slightly more often, and these are generally perfectly fine for everyday use. These are released early to allow for translation checking and for wonderful people to help spot bugs and regressions.
+Finally, there are the "mainline" builds, which are built from the main git branch.
+These are built on every change and can be found on the Actions tab (see below).
+
+### Main release
+
+Main releases are made to the [releases page](https://github.com/Ralim/IronOS/releases).
+Download the zip file that matches your model of soldering iron and extract it.
+Select the appropriate file type for your unit, in general Miniware devices need `.hex` and Pinecil needs `.dfu`.
+Flash according to details below
+
+### Bleeding edge / latest
+
+For the _latest_ code, you will need to download the zip file from the artifacts page on the build for what you want.
+Head to the [Actions](https://github.com/Ralim/IronOS/actions) page and then select the run for the appropriate branch you would like.
+In general you probably want `master`.
+
+Once you click on a run, scroll down to the "Artifacts" section and then click on your model to download a zip file.
+Then this works the same as a production release (use the correct file).
+
+# TS80 / TS80P
+
+This is completely safe, but if it goes wrong just put the `.hex` file from the official website ([TS80](https://www.minidso.com/forum.php?mod=viewthread&tid=868&extra=page%3D1)/[TS80P](https://www.minidso.com/forum.php?mod=viewthread&tid=4070&extra=page%3D1) onto the unit and you're back to the old firmware. Downloads for the `.hex` files to flash are available on the [releases page.](https://github.com/Ralim/IronOS/releases) The file you want is called TS80.zip or TS80P.zip. Inside the zip file (make sure to extract the file before flashing with it) will be a file called `TS80_{Language-Code}.hex`/`TS80P_{Language-Code}.hex`.
+
+Officially the bootloader on the devices only works under Windows (use the built-in File Explorer, as alternative file managers or copy handlers like Teracopy will fail). However, users have reported that it does work under Mac, and can be made to work under Linux _sometimes_. Details over on the [wiki page](https://github.com/Ralim/TS80/wiki/Upgrading-Firmware).
+
+1. Hold the button closest to the tip (MHP30 the left button on the back), and plug in the USB to the computer.
+2. The unit will appear as a USB drive. (Screen will say `DFU` on it.)
+3. Drag the `.hex` file onto the USB drive.
+4. The unit will disconnect and reconnect.
+5. The filename will have changed to end in _.RDY_ or _.ERR_
+6. If it ends with _.RDY_ you're done! Otherwise, something went wrong.
+7. If it didn't work the first time, try copying the file again without disconnecting the device, often it will work on the second shot.
+8. Disconnect the USB and power up the device. You're good to go.
+
+For the more adventurous out there, you can also load this firmware onto the device using an SWD programmer, for easier installation follow the guide at the end of this document.
+
+On the USB port, `USB_D+` is shorted to `SWDIO` and `USB_D-` is shorted to `SWCLK` so debugging works without disassembly (attach while staying in the bootloader). Installing [IronOS-dfu](https://github.com/Ralim/IronOS-dfu) is recommended as it allows reliable flashing of binary files with [dfu-util](http://dfu-util.sourceforge.net/).
+
+## Mac
+
+sgr1ff1n (Shane) commented in [issue 11](https://github.com/Ralim/IronOS/issues/11) that upgrading worked on their Mac as per normal:
+
+> I just wanted to say that I was able to update the firmware on my TS100 from the stock version to 1.08 found in this repository using my Mac. I simply followed the same steps however through Finder. I have a MacBook Pro (13-inch, Mid 2012) running Sierra 10.12.4 (16E195).
+
+## Linux
+
+While in the past there were reports of unreliable upgrades, the consensus in [issue 11](https://github.com/Ralim/IronOS/issues/11) is that things work mostly as expected in Linux.
+
+@awigen has contributed a script [flash_TS100_linux.sh](https://raw.githubusercontent.com/Ralim/IronOS/master/Flashing/flash_TS100_linux.sh) that works on Ubuntu 16.04 as well as other distros.
+
+If you want to do it manually (or if the script does not work for some reason) the general procedure is the same as for Windows, the differences are in the way to mount the unit and copy the firmware.
+Remember that after flashing, the firmware filename will have changed to end in `.RDY` or `.ERR` or `.NOT` and only `.RDY` means the flashing was successful!
+
+- The unit has to be mounted as `msdos` type (thanks @balrog-kun for having spotted it). You may disable automount, but unmounting the automounted drive and remounting as `msdos` works fine. You do not need to turn off automounting, but you do need to unmount the device with `umount`.
+- It is recommended to use an all-caps filename for the firmware, even if successful flashing were done with lower case names.
+- Avoid USB hubs, plug directly in your computer.
+- If it fails, try again several times without unplugging. Just let it remount.
+
+Example, to be run as root, once the unit has been plugged in DFU mode and auto-mounted:
+
+```bash
+FW=TS80.hex
+unset NAME
+eval $(lsblk -P -p -d --output NAME,MODEL|grep "DFU[ _]Disk")
+[ -z ${NAME+x} ] && exit 1  # Could not find DFU device
+umount "$NAME"
+mkdir /tmp/mntdfu
+mount -t msdos "$NAME" /tmp/mntdfu
+cp "$FW" "/tmp/mntdfu/$(basename $FW|tr a-z A-Z)"
+sync
+umount /tmp/mntdfu
+rmdir /tmp/mntdfu
+```
+
+Device will reboot and automount will rerun if not disabled.
+Check the extension of your firmware, it should be `.RDY` now.
+
+## FAQ
+
+#### The file is showing up with the extension `.ERR`
+
+This can occur during the programming process if any of the checks in the bootloader fail. This is often triggered by anti-virus software or using a non-Windows host OS.
+
+First, try just copying the file a second time.
+
+1. Attach the iron in DFU mode.
+2. Copy the `.hex` file to the device.
+3. The device disconnects and connects with the `.ERR` file.
+4. Copy the same `.hex` file again **⛔ DO NOT TRY AND DELETE THE OLD ONE ⛔**.
+5. The device will disconnect and reconnect again.
+6. The device _should_ now have the `.RDY` file.
+7. You're done.
+
+If this fails and you are on Mac or Linux reading the wiki page about programming can help. There is also a very long issue thread going through all of the different attempts around this too.
+
+If you are on Windows, it's often best to try another computer (friends, work, partners etc.).
+
+#### Device randomly disconnects or does not show up in DFU mode
+
+1. Check if the USB cable you are using has the data pins; test it on another device. There are a surprisingly large number of micro-USB cables that are power _only_.
+
+2. Try other USB ports. Often different USB controllers will interact with the units differently due to design quirks in the Miniware design.
+
+### Alternative bootloader
+
+If you are an advanced user, and you have used `usb-dfu` tools before, or you would like to learn; there is an alternative bootloader for these irons.
+This will **NOT** show up as a USB storage drive, but instead show up using a standard DFU protocol device. You can then use dfu tools or GUIs to upgrade the iron using the `.bin` files that are posted to the releases page.
+
+To install this alternative bootloader, follow the instructions [here](https://github.com/Ralim/IronOS-dfu/blob/mainline/docs/Bootloader.md).
+
+Note that this is only recommended for users who know what they are doing. If you don't understand how this works, please don't flash this.

Documentation/GettingStarted.md

@@ -1,12 +1,20 @@
 # Getting Started
 
 Getting started with IronOS on your Pinecil/TS80/TS80P/TS100.
-If your device did not come with IronOS already installed, or if you need to update to the latest version; please see the [Flashing Guide](/Documentation/Flashing.md). It is recommended to update to the newest stable release.
+If your device did not come with IronOS already installed, or if you need to update to the latest version; please see the flashing guide for your device:
+
+- [MHP30](https://ralim.github.io/IronOS/Flashing/MHP30)
+- [Pinecil V1](https://ralim.github.io/IronOS/Flashing/Pinecil%20V1/)
+- [Pinecil V2](https://ralim.github.io/IronOS/Flashing/Pinecil%20V2/)
+- [TS80 / TS80P](https://ralim.github.io/IronOS/Flashing/TS80%28P%29/)
+- [TS100](https://ralim.github.io/IronOS/Flashing/TS100)
+
+It is recommended to update to the newest stable release.
 
 Once your Iron has been flashed, on first power on it _may_ warn you about the system settings being reset.
 _Do not panic_; this is 100% completely normal. This is here to note to you that they have been reset to handle the internal structure changing.
 
-If you receive a warning about the accelerometer or USB-PD not being detected, please see [here](/Documentation/HardwareIssues.md).
+If you receive a warning about the accelerometer or USB-PD not being detected, please see [here](https://ralim.github.io/IronOS/HardwareIssues/).
 
 ## The Home screen (or idle screen)
 
@@ -14,29 +22,29 @@ This is the landing page of the firmware, from here you can choose to either go
 
 By default this will show a screen similar to the one below:
 
-![Home Screen](/Documentation/images/HomeScreen.png)
+![Home Screen](https://raw.githubusercontent.com/Ralim/IronOS/dev/Documentation/images/HomeScreen.png)
 
-Note that this may be drawn mirrored depending on the orientation of your screen.
+Note that this may be drawn mirrored depending on the orientation of your screen (detailed mode shows a different home screen).
 
 The soldering iron symbol on the screen will appear near the tip. This is here to indicate that pressing the button closest to the front of the iron will enter soldering mode.
 
 And naturally, the spanner like icon represents that pressing the button near the rear of the soldering iron will enter the settings menu.
 
-In the settings, you can turn on an advanced idle screen instead. The buttons still function the same, however, the image will be swapped for a text telling you the current status of the iron with extra details.
+In the settings, you can turn on a detailed idle screen instead. The buttons still function the same, however, the image will be swapped for a text telling you the current status of the iron with extra details.
 
-Depending on how your device is being powered, at one end of the screen, the firmware will either draw text to show you the current-voltage your unit is being provided with, a battery icon (if battery mode is enabled) or a power plug icon.
+Depending on how your device is being powered, at right side of the screen, the firmware will either show the voltage your unit is being provided with, a battery icon (if battery mode is enabled) or a power plug icon.
 
-If you see exclamation marks (!!!) where the soldering iron should be, this indicates that the firmware can't see the tip connected. This could indicate a problem with the iron or tip if there is one inserted. First, try removing and reinstalling the tip. If the issue persists please see the [hardware issues section](/Documentation/HardwareIssues.md).
+If you see an (**X**) where the soldering iron should be, this indicates that the firmware can't see the tip connected. This could indicate a problem with the iron or tip. First, try removing the tip screw and tip and gently reinstalling both; ensure that the tip is seated all the way back. If the issue persists please see the [hardware issues section](https://ralim.github.io/IronOS/HardwareIssues/).
 
-This screen features a burn-in protection feature, where if no buttons or movement have been detected for a while it will automatically blank the screen to try and reduce burn-in if the iron is left unattended. Any movement or button press will wake the screen.
+This OLED screen features burn-in protection; if no buttons or movement have been detected for a while it will automatically blank the screen to reduce burn-in when the iron is left unattended. Any movement or button press will wake the screen.
 
 ### Hidden Extras
 
 Additionally to the two icons shown, there are two "hidden" actions that can be performed on this menu.
 
-If you press and hold on to the button near the tip of the soldering iron, this will bring up the temperature adjustment screen. Normally this is not required; but if you would like to adjust the set temperature _before_ the tip starts to heat, this can be useful.
+If you press and hold the button near the tip (`+/A`), this enters the temperature adjustment screen. Normally this is not required; but if you would like to adjust the set temperature _before_ the tip starts to heat, this can be useful.
 
-If you press and hold the button near the rear of the iron it will take you into the [debug menu](/Documentation/DebugMenu.md).
+If you press and hold the button near the rear of the iron (`-/B`), it will take you into the [debug menu](https://ralim.github.io/IronOS/DebugMenu/).
 
 ## Soldering Mode
 
@@ -58,30 +66,31 @@ In Sleep mode, the temperature of the iron automatically lowers to 150 °C (defa
 
 Simply picking up or moving the iron will wake it back up into soldering mode. You can also press any button and this will also wake the iron up.
 
-Optional Hall Effect Feature (Pinecil only):
-Pinecil has an unpopulated footprint (U14) for a hall effect sensor (Si7210). Adding the sensor and placing a strong magnet on the holder stand will trigger Pinecil to sleep after it enters the stand, and Zzzz will appear on the screen. The magnet is positioned on the stand in proximity to the sensor which then activates one of 10 user defined settings (0=off, 1=lowest sensitivity, 9=highest sensitivity). Read the Hall Sensor document for details on [installation](/Documentation/HallSensor.md).
+#### Optional Hall Effect Feature (Pinecil only):
 
+Pinecil has an unpopulated footprint (U14) for a hall effect sensor (Si7210-B-00-IV). Adding the sensor and placing a neodymium magnet on the holder stand will trigger Pinecil to sleep after it enters the stand, and Zzzz will appear on-screen. The magnet is positioned on the stand in proximity to the sensor/handle which then activates one of 10 user defined settings (0=off, 1=lowest sensitivity, 9=highest sensitivity). Read the Hall Sensor document for [details on installation](https://ralim.github.io/IronOS/HallSensor/).
 
 ### Idle Shutdown
 
 If, after entering sleep mode, the iron still does not see movement for a much longer time (default=10 minutes); it will shut down and return to the home screen.
 
-
 ## Settings Menu
 
-The settings menu is the most often evolving aspect of the firmware, so each option is not documented here. However, do not panic, as every menu option has an on-screen description so you don't _need_ to come back here to figure them all out.
+The settings menu is the most evolving aspect of the firmware, so each option is not documented here. However, do not panic, as every menu option has an on-screen description so you don't _need_ to come back here to figure them all out.
 
 To navigate the menu, the two buttons act separately.
-The button that you pressed to enter the menu (rear) scrolls down the options, and the other button (front) will enter and change the current option.
+The rear button (`-/B`) is pressed to enter the menu and scrolls down the main options, and the other front button (`+/A`) will enter and change the current option.
 
-To see a description of an option, just wait and after a little time, it will scroll across the screen.
+To see a description of an option, just wait, and after a few seconds, it will scroll across the screen.
 
-The menu is comprised of a 'main menu' of categories and then sub-items that allows you to adjust parameters.
+The menu is comprised of a 'main menu' of categories and then sub-items that allow you to adjust parameters.
 
 You can long hold buttons to change through options faster, and there is some acceleration when holding the buttons.
 
-There is a small scrollbar that will be shown along the edge of the screen to indicate how far through the current list you are.
+There is a small scrollbar that appears along the right edge of the screen to indicate how far through the current list you are (looks like a dot).
 
-Additionally, this scrollbar will blink rapidly when you are on the last item in a menu choice.
+Additionally, this scrollbar will blink rapidly when you are on the last value in a range of a sub-menu. For example, if you are in Motion Sensitivity, which has a range of 0 - 9, it will blink when you are at 9.
 
 I highly recommend taking a few minutes to go through all of the options in the menu to get a feel for what you can change, almost every aspect of the internal system is adjustable to suit your needs.
+
+If you want to start over, simply go to Advanced settings > Restore default settings, confirm using the front (`+/A`) button. This sets all menu items to defaults, and keeps the same version firmware.

Documentation/HallSensor.md

@@ -2,19 +2,22 @@
 
 ## Sleep Mode Menu
 
-In Sleep mode, the temperature of the iron automatically lowers to 150 °C (default), which is just below the melting point of the solder. This helps reduce rate of oxidation and damage to the iron tip. In general, when not using the iron, unplug it or let it sleep to increase the longevity of replaceable tips. The default sleep temperature can be customized.
+In Sleep mode, the iron automatically lowers the temperature to 150 °C (default). This default was chosen as it is just below the melting point of many solders. A stand-by lower temperature helps reduce the rate of oxidation and prevents damage to iron tips. In general, when not using the iron, unplug it or let it sleep to increase the longevity of replaceable tips. The default sleep temperature can be customized.
 
-Simply moving the iron will wake it back up into soldering mode. You can also press any button and this will also wake-up the iron.
+Simply moving the iron or pressing any button will wake it back up into soldering mode.
 
 ### Optional Hall Effect Feature (Pinecil only):
 
-Inside the Sleep Menu is an additional type of sleep setting. Pinecil has an unpopulated footprint (U14) for a hall effect sensor (Si7210). It is possible with the hall sensor to trigger Pinecil to go to sleep after it enters the stand, and Zzzz will appear on the screen. After installing the hall sensor, a magnet is positioned on the stand close enough to the sensor to activate one of ten user selectable settings.
-  - 0=off, 1=1000, 2=750, 3=500, 4=250, 5=150, 6=100, 7=75, 8=50, 9=25   (9 has the highest sensitivity to magnets)
-  - Setting of 1 might be used if you solder on PCBs with magnets and do not wish Pinecil to auto-sleep constantly. And a very strong/large magnet would be required on the stand to activate the sensor sleep mode.
-  - Setting of 9 would be useful if you only had a small magnet and are not concerned about Pinecil falsely triggering sleep mode near magnetized items/tools.
-  - Neodymium magnets are recommended. If using small magnets, 2-3 may be required, but too many can also be detrimental.
-  - Actively watch the hall number change (in [debug menu](/Documentation/DebugMenu.md)) while you slowly move the magnet around to seek the best locations & whether you have too many or too few magnets. Positioning the magnet where you have the highest hall number will ensure consistent sleep mode when you place the iron in the stand. This requires some experimenting.
-  - Sensor is physically located near the copper contacts for the tip at the front of the handle. Reference [Schematics U14](https://files.pine64.org/doc/Pinecil/Pinecil_schematic_v1.0a_20201120.pdf).
-  - Positioning/type/quantity of magnets is important for best results. Sometimes [too many magnets](https://www.youtube.com/shorts/afkqKwCX00I) breaks the effect by distorting the magnetic field.
-  - Orientation of North and South faces of magnets is important to increase reaction of the hall sensor [SI7210-B-00-IV](https://www.silabs.com/documents/public/application-notes/an1018-si72xx-sensors.pdf).
+Inside the [Sleep Menu](https://ralim.github.io/IronOS/Settings/#setting-sleep-temp) is an additional type of sleep setting. Pinecil has an unpopulated footprint (**U14**) for a hall effect sensor, Silicon Labs **Si7210-B-00-IV**. After installing the hall effect sensor (HES), it is possible to auto-trigger Pinecil to enter sleep mode when it enters the stand, and _Zzzz_ will appear (or text in detailed mode). This could be a fun enhancement for any Pinecil and adds a feature typically only found in more expensive high-end irons. The HES is available at many electronic stores for ~$2-$6.
 
+After installing the HES on the PCB, place a magnet on the stand close enough to the sensor to activate one of ten user selectable settings.
+
+- 0=off, 1=1000, 2=750, 3=500, 4=250, 5=150, 6=100, 7=75, 8=50, 9=25 (9 has the highest sensitivity to magnets)
+- Setting of 1 might be used if you solder on PCBs with magnets and do not wish Pinecil to auto-sleep constantly. A very strong/large magnet would be required on the stand to activate the sleep mode if you use setting 1.
+- Setting of 9 would be useful if you only had a small magnet and are not concerned about Pinecil falsely triggering sleep mode near magnetized items/tools.
+- Actively watch the _hall_ number change while you slowly move the magnet around to seek the best locations & whether you have too many or too few magnets. Position the magnet(s) where you have the highest hall number will ensure consistent sleep mode when you place the iron in the stand. This requires some experimenting.
+- [See debug menu for how to display the _Hall_ number](https://ralim.github.io/IronOS/DebugMenu/)
+- Note that the sensor is physically located near the copper contacts for the tip at the front of the handle. [Reference Schematics U14](https://files.pine64.org/doc/Pinecil/Pinecil_schematic_v1.0a_20201120.pdf).
+- Neodymium magnets are recommended. If using small magnets, 2-3 may be required, but too many could also be detrimental.
+- Positioning/type/quantity of magnets is important for best results. Sometimes too many magnets breaks the effect by distorting the magnetic field **[as seen in this demo video](https://www.youtube.com/shorts/afkqKwCX00I)**. The video shows magnets at the top of the stand, and the pinecil goes correctly into Zzzz with _only_ those magnets. When more magnets are added at the side, the Pinecil did not go to sleep, which is contrary to the goal. See the PDF below for details on magnetic fields with SI7210-B.
+- Orientation of North and South faces of magnets is important to increase reaction of the hall sensor [see data sheet SI7210-B-00-IV](https://www.silabs.com/documents/public/application-notes/an1018-si72xx-sensors.pdf).

Documentation/Hardware.md

@@ -5,4 +5,4 @@
 - Accelerometer is the MSA301, this is mounted roughly in the middle of the unit
 - USB-PD is using the FUSB302
 - The hardware I2C bus on PB6/7 is used for the MSA301 and FUSB302
-- The OLED is the same SSD1306 as everything else, but its on a bit-banged bus
+- The OLED is the same SSD1306 as everything else, but it’s on a bit-banged bus

Documentation/HardwareIssues.md

@@ -16,13 +16,24 @@ If your iron is new, there is a slim chance your accelerometer may be DOA and ne
 
 ## No USB-PD IC detected
 
-Generally, this means either something went very awry in the firmware or the chip is not answering as would normally be expected. Try rolling back to an earlier release to confirm if the issue still persists then the device may need repair. If you have some form of seller protection/support you most likely want to reach out to this to be safe. If you don't, you can always attempt to replace the IC yourself. As of writing both the TS80P and Pinecil use the FUSB302.
+Generally, this means either something went very awry in the firmware, or the chip is not answering as would normally be expected. Try rolling back to an earlier release to confirm if the issue still persists then the device may need repair. If you have some form of seller protection/support, you most likely want to reach out to this to be safe. If you don't, you can always attempt to replace the IC yourself. As of writing both the TS80P and Pinecil use the FUSB302.
 
 **Note this warning will only be shown the first few times until settings are reset**
 
 ## No tip detected
 
-if your tip is not being detected, the most likely cause is that the heater element has been damaged from over-temperature, being dropped or bad luck. As the heater coil is part of the temperature measurement circuit neither will work if it's damaged.
+If your tip is not being detected, the most likely cause is that the heater element inside the tip has been damaged from over-temperature, being dropped or bad luck. As the heater coil is part of the temperature measurement circuit neither will work if it's damaged.
 
 The best way to see if this is the case is to measure the resistance across the contacts to the tip using a multimeter.
 you are expecting to see measurements in the range of 4-10 ohms. Anything higher than 10 ohms is _generally_ an issue.
+
+## Iron will not heat up and displays a high temperature
+Check the Rtip and CHan numbers ([see debug menu](https://ralim.github.io/IronOS/DebugMenu/)). Extremly high CHan is suspect to a problem with the cold junction compensation temperature sensor.
+
+For Pinecil V1, inspect near U10 which is the TMP36 sensor ([see issue here](https://github.com/Ralim/IronOS/issues/1234)). You may be able to reflow/resolder the TMP36 chip at U10 to correct a weak solder joint.
+
+If it worked on older firmware, but not on 2.16+, weak solder joints are suspect. The newer firmware runs the ADC a bit faster to keep tighter control of the tip temperature. Normally this wont cause an issue as the output from the TMP36 is powerful enough to keep up without any issue. But if you have a weak or cold solder joint this could cause issues.
+
+If the CHan is extremely high, and reflowing the temperature sensor does not resolve the issue; inspect the pins in the main MCU, possibly try giving them a light squeeze to the board while watching CHan.
+
+If you have a different device, follow the same logic and locate the temperature sensor on your device.

Documentation/History.md

@@ -1,5 +1,46 @@
 # Version Changes
 
+## V2.19
+- Bug-fix Infinite Boot Logo
+- Shutdown settings for MHP30
+- Accelerometer sensitivity for MHP30
+- Allow showing unique device ID
+- Bug-fix chance of a power pulse at device boot
+- Updated translations
+- Improved documents, added features table
+
+## V2.18
+- Support for animated bootup logo's
+- Bootup logo's moved to their own IronOS-Meta repo
+- New Vietnamese translation (limited due to screen size)
+- Fixes for SC7A20 in TS80(P)
+- Updated translations
+- Better Instructions/documents
+
+## V2.17
+### Big changes
+- Indicate status of VBus for modding Pinecil (debug menu)
+- Better hall effect sensor sensitivity adjustment (larger range with more steps)
+- Temperature increment will "round" to nearest multiple of increase amount
+- Build setup migrated to Alpine (You can now build in docker easily, and on PinePhone/PinePhonePro)
+- -> Removed proprietary compiler for Pinecil RISCV now all uses normal gcc
+- -> Removed using the arm specific build of gcc for the one that alpine ships (Miniware devices)
+- Logo generator python script creates `.dfu` files for ease of use with Pinecil
+- Upgrades to translations
+- Support for new GD32103 based TS100 units turning up on the market
+- Raw hall effect reading now shows in the Pinecil debug menu
+- Fixed automatic orientation for newer TS80P's with the SC7 accelerometer
+- User interface slight changes
+- New `metadata.zip` file to allow the Pine Updater to automatically fetch information on releases
+### Notes
+- VBus mod detection may not play well with all PPS chargers. If your iron reboots when you view this in the debug menu its not a fault. ([#1226](https://github.com/Ralim/IronOS/issues/1226))
+- `metadata.zip` is only designed for use by automatic software, ignore it for normal use
+- More details on Pinecil VBus mod coming via other channels.
+- Hall effect sensor is not fitted to Pinecil's by default, you have to fit this yourself if you want the feature
+- Tweaks to the Accelerometer code means the drivers are slightly more fussy. If you run into any issues let us know in the discussion or issues.
+- -> Release has been updated to build `e065be3` after one bug with the BMA223 was found.
+
+
 ## V2.16
 
 * Overhaul of the Timer+ADC setup with help from @sandmanRO

Documentation/Logo.md

@@ -1,39 +1,56 @@
-# Startup Logos
-
-This firmware supports a user created bootup logo.
-By default there is _not_ one included in the firmware, as this means that once flashed they generally stay.
-
-## Generating the Logo files
-
-The [Python script](https://github.com/Ralim/IronOS-Meta/blob/main/Bootup%20Logos/img2logo.py) converts an image passed into it on the command line to a `.hex` file or a `.dfu` to be uploaded to the iron in DFU mode (similar to the process described above). The image can be in color and any size, but it will be resized and converted to 1-bit color. However, it looks best if you create a 96x16 image in an image editor and color the pixels black or white manually.
-
-There are community logo's already converted available for download in the releases in [IronOS-Meta](https://github.com/Ralim/IronOS-Meta/).
-
-The converter requires at least Python 3 and Pillow (if you don't have it, it will tell you to install PIL, which is an old version of the same thing). See [this page](https://stackoverflow.com/a/20061019/6705343) on StackOverflow about installing it.
-
-What works can vary, but this command may work:
-
-`python3 -m pip install pillow`
-
-Then, to convert an image:
-
-- `python3 img2logo.py infile.png out -m` for Miniware
-- `python3 img2logo.py infile.png out -p` for Pinecil
-
-Run `python3 img2logo.py --help` to see available options.
-
-## Flashing the Logo
-
-### Miniware (TS100/TS80/TS80P)
-
-Upload the HEX file to the iron in DFU mode and, if the file's extension changes to .RDY, your custom splash screen should show up on startup.
-You perform this the same way as if you were flashing a new firmware, and all of the existing notes around this apply.
-
-If you have flashed the `IronOS-dfu` alternative bootloader, you should use the `.dfu` files instead
-
-### Pinecil
-
-For Pinecil, we require using dfu-util instead to flash the logo art (Pinecil does not use hex).
-Please see the [Meta repo](https://github.com/Ralim/IronOS-Meta) for the tooling for converting logo's as well as automatically generated logo's
-
-- `dfu-util -D logo_file.dfu`
+# Startup Logos
+
+This firmware supports a user created bootup logo.
+By default, there is _not_ one included in the firmware. This means that once flashed they generally stay. If you want no logo again, you would have to flash a blank image to the bootup logo. 
+
+## Generating the Logo files
+
+There are community logo's already converted and ready to use in [IronOS-Meta/releases](https://github.com/Ralim/IronOS-Meta/releases).
+Download the zip for Pinecil or Miniware and then install using the instructions in the Flashing section below.
+
+If you want to make custom art then it needs to be converted with a Python script. The script and other needed files are in [IronOS-Meta](https://github.com/Ralim/IronOS-Meta/). Go to that folder, then it is easiest to select the green Code button (upper right), then Download Zip. This way you get all the files you need and some extras. You only need what is inside Boot Logos. Put your custom image inside the Boot Logos folder with all python script files already there.
+
+The Python script converts an image passed into it on the command line into both a `.hex` file and a `.dfu` to be uploaded to the iron in DFU mode. The image can be in color and any size, but it will be resized and converted to 1-bit color. However, it looks best if you create a 96x16 image (Png or Bmp) in any image editor and color the pixels black & white manually.
+
+The converter requires at least Python3 and Pillow apps. Follow online instructions for installing Python and Pillow.
+
+For Windows, it is recommended to use Windows PowerShell instead of Command.
+Open Powershell (run as administrator), type python to install it, it will open microsoft store where you can install it free.
+Go back to Powershell and install Pillow. What works can vary, but this command may work:
+
+    python -m pip install Pillow
+or 
+    python3 -m pip install pillow
+
+If the above does not work, see [this page](https://stackoverflow.com/a/20061019/6705343) on StackOverflow about installing Pillow.
+Now that Python and Pillow are successfuly installed, you can convert an image.
+
+Go back to Powershell and type this command (change infile.png to the name of your image):
+
+- `python img2logo.py infile.png out -m`  for Miniware
+- `python img2logo.py infile.png out -p`  for Pinecil
+
+Run `python img2logo.py --help` to see available options. Replace the word python with python3 if you have multiple versions of python installed. 
+
+Note: make sure your image file is in the same folder as script files (img2logo.py, output_dfu.py, output_hex.py).
+
+## Flashing the Logo
+
+### Miniware (TS100/TS80/TS80P)
+
+Upload the HEX file to the iron in DFU mode and, if the file's extension changes to .RDY, your custom splash screen should show up on startup.
+You perform this the same way as if you were flashing a new firmware, and all the existing notes around this apply.
+
+If you have flashed the `IronOS-dfu` alternative bootloader, you should use the `.dfu` files instead
+
+### Pinecil V1
+
+For Pinecil V1, we require using dfu-util to flash the logo art (Pinecil does not use hex).
+[Pine64 Updater](https://github.com/pine64/pine64_updater/releases) is the easiest way to load the Bootup logo onto Pinecil as it already includes the necessary DFU library. Connect Pinecil to a PC, and open the Updater the same as updating firmware.
+  Select Custom > Browse to the DFU image file you just made > Update to install.
+
+The bootup logo is stored in a separate location than the IronOS firmware and you do not have to worry about it changing or breaking the IronOS.
+
+You could also use dfu-util and use Command line to install it.
+
+- `dfu-util -D logo_file.dfu`

Documentation/Menu.md

@@ -1,29 +1,31 @@
 # Menu System
 
-In this firmware for these soldering irons, all settings are adjustable on the device itself. This means you do **not** require a computer to change any settings.
+In this firmware for these soldering irons, all settings are adjustable on the device itself. This means a computer is **not** required to change any setting.
 
 ## Soldering mode
 
 In this mode the iron works as you would expect, pressing either button will take you to a temperature change screen.
-Use each button to go up and down in temperature. Pressing both buttons will exit you from the temperature menu (or wait 3 seconds and it will time out).
-Pressing both buttons or holding the button near the USB will exit the soldering mode.
-Holding the button at the front of the iron will enter boost mode (if enabled).
+- Use each button to go up/down in temperature. Pressing both buttons exits the temperature menu (or wait 3 seconds and it will time out).
+- Pressing both buttons or holding the rear button (`-/B`) will exit Soldering Mode.
+- Holding the front button (`+/A`) will enter [Boost mode](https://ralim.github.io/IronOS/Menu/#boost-mode) (if enabled).
 
-## Settings Menu
-
-This menu allows you to cycle through all the options and set their values.
-The button near the USB cycles through the options, and the one near the tip changes the selected option.
-Note that settings are not saved until you exit the menu.
-If you leave the unit alone (ie don't press any buttons) on a setting, after 3 seconds the screen will scroll a rough description of the setting.
+## Settings mode
 
+This mode allows you to cycle through all the options and set custom values.
 The menu is arranged so that the most often used settings are first.
-With submenus being selected to enter using the front button (as if you were going to change the setting).
-Scrolling through the submenu will return you back to its entry location after you scroll through all of the options.
+
+- The rear button (`-/B`) cycles through the main options. (declines i.e. Additional warning to proceed.)
+- The front button (`+/A`) either enters a submenu or changes the selected option. (accepts i.e. Additional warning to proceed.)
+- If the device is unplugged before exiting the main menu settings will not be saved.
+- To exit the menu, either continue to press (`-/B`) or hold it until the idle screen is reached. Alternatively, you could press (`-/A`) & (`-/B`) simultaneously to exit the submenu and once more to exit the main menu.
+- If you idle on a setting (i.e., don't press any buttons), after 3 seconds, the screen scrolls a brief description (mini help guide).
+- Enter submenus using the front button (`+/A`) if you are going to change it or wish to view it.
+- Scrolling through the all options of a submenu will return you back to its entry location.
 
 ### Calibrating input voltage
 
 Due to the tolerance on the resistors used for the input voltage divider, some irons can be up to 0.6 V out on the voltage measurement.
-Please calibrate your iron if you have any issues with the cutoff voltage.
+Please calibrate your iron if you have any issues with the cutoff voltage. This calibration is not required if you have no issues.
 Note that cutoff messages can also be triggered by using a power supply that is too weak and fails under the load of the iron.
 
 To calibrate your iron:
@@ -31,29 +33,33 @@ To calibrate your iron:
 1. Measure the input voltage with a multimeter and note it down.
 2. Connect the input to your iron.
 3. Enter the settings menu
-4. Under the advanced submenu
+4. Under the Advanced submenu
 5. Select the calibrate voltage option
 6. Use the front and back buttons to adjust the displayed voltage to minimize the error to your original measurement
-7. Press both buttons at the same time to save and exit to the menu
+7. Press both buttons at the same time to Save and Exit to the menu
 
-### Calibrating tip offset (Set tip model)
+### Calibrate Tip CJC
+This performs a Tip Cold Junction Calibration (CJC) ([see Temperature for details](https://ralim.github.io/IronOS/Temperature/)). This is normally not needed unless you have an issue with tip temperature or your tips are wearing out prematurely. Changing tip lengths does not necessarily mean a calibration is needed. Check first that your tips are not defective, and measured resistance is close to specifications (Pinecil/TS100 short tips 6.2 Ω, long tips 8 Ω, TS80(P) ~4.5 Ω).
 
-Some tips will have an offset on their readings, to calibrate this out perform the following steps:
+What this is for: some tips have an offset on their readings which causes issues, i.e., the actual temperature of the tip is much higher than displayed. To calibrate this out, perform the following steps. 
 
-1. Connect power to your iron
-2. Make sure the tip is at room temperature (ie. wait for a fair while after using the iron before calibration)
-3. Enter the settings menu
-4. Scroll down to the advanced menu, and then the temperature calibration
-5. Press the button to change the option (tip button)
-6. The display will start to scroll a warning message to check that the tip is at ambient temperature!
-7. Press the button near the tip of the iron to confirm
-8. The display will go to "...." for a short period of time as the unit measures the tip temperature and the handle temperature and compares them
-9. The display will then go back to *TMP CAL* and it will display a number, this is your offset number. You generally don't need it unless debugging issues
-10. Calibration is done, just exit the settings menu as normal
-11. You're done, enjoy your iron!
+Caution: if the method below is not followed, the iron could be worse than before calibration. If you need to repeat the method, first unplug and let the handle/PCB cool down to room temperature.
+
+1. Connect power to your device.
+2. Go to **`Advanced Settings`** using (`-/B`) and press (`+/A`) to select it. Use (`-/B`) to scroll to **`Calibrate CJC at next boot`** and confirm with (`+/A`).
+3. Accept the *'warning text'* with (`+/A`).
+3. Exit the settings menu as usual by pressing and holding (`-/B`).
+4. Unplug you device.
+5. **Critical: Make sure a tip is attached & wait until the tip & handle are at room temperature.** (Wait a reasonable amount of time after having used the device.)
+6. Power the device and ideally keep it out of your hands (You know it might get warm.).
+7. The display shows **`....`** for a short time while the device measures and compares the tip and handle voltages.
+8. As a result the new *Offset value* is displayed. This value can later be viewed in the **`Debug menu`**.
+9. Calibration is done and the device proceeds booting.
+
+Note: offsets are dependant on your tip, temperature sensor, and the MCU. It's the culmination of tolerances at rest. Typical values are 700-1000 range. This is only designed to be used at boot while cold (ambient room temperature), as temperatures drift apart as soon as power is connected. Doing this reading repeatedly could result in wide varience of the offset number and/or incorrect calibration.
 
 ### Boost mode
 
-This allows you to change the front key (one near the tip) to become a boost button when you hold it for > 2 seconds. This allows you to set this button to change the soldering temperature for short periods. For example when soldering a big joint and you want to boost the temperature a bit.
+This allows you to change the front button (`+/A`) to become a boost button when you hold it for > 2 seconds. A boost button changes the soldering temperature for short periods. For example, when soldering a big joint and you need a much higher temperature, hold the (`+/A`) button down and it will temporarily increase the temperature to your 'boost' setting. When you release the button, the temperature will gradually go back to the normal set temperature.
 
-The boost temperature is set in the settings menu.
+The boost temperature is set in Soldering settings.

Documentation/Power.md

@@ -1,24 +1,46 @@
 # Power & Performance
 
-All of the irons are PWM controlled resistive heating elements.
+All of the irons are [PWM controlled](https://www.digikey.com/en/blog/pulse-width-modulation#) resistive heating elements.
 This means that the electronics in the handle can only turn the heating element on and off.
-This *means* that the power provided in the tip is 100% controlled by the supply voltage used.
+This *means* that the power provided in the tip is 100% controlled by the supply voltage used (higher voltage PSU = higher performance).
 
-Both irons at their simplest are just a resistor connected to your power source via a switch.
+Irons at their simplest are just a resistor (Ω) connected to your power source via a switch.
 
-When the switch is on, the power in the resistor is `Current (I) times Volts (V)`.
-Current through the resistor is `Volts (V) divided by Resistance (R)`.
-Combining these two gives the common equation, power is `Volts (V) squared / Resistance (R)`.
+- When the switch is on, the power in the resistor is: $P(watts) = V(volts) \times\ I(current=amps)$
+- Current through the resistor is:  $I(amps) = V(volts) ÷ Ω (resistance)$
+- Combining these gives some common equations for Power
+
+   $P(watts) = V(volts) * I(amps)$ or $P = V^2 ÷ Ω$
+
+The resistance of the tip is a fixed constant in ohms (Ω):
+- 6.2 Ω  Pine64 short tip
+- 8.0 Ω  TS100/Pinecil long tip
+- 4.5 Ω  TS80(P)
+
+This means the power delivered to the soldering tip is proportional to the voltage squared.
+Therefore the Pinecil and TS100 perform poorly when run off 12V power supplies and may issue a `Thermal Runaway` message (weak power supply).
+
+#### Use an [Ohm calculator](https://www.rapidtables.com/calc/electric/power-calculator.html#dc) to quickly derive watts.
+
+| Type       | Volts| / | Tip Ω | = |  Amps | * | Volts | = | Watts |
+| :--------: | :--: |:-:| :---: |:-:|:-----:|:-:| :---: |:-:|:-----:|
+| USB QC3.0  | 9V   | / | 4.5 Ω | = |  2.0A | * |  9V   | = |  18W  |
+| USB-C PD   | 12V  | / | 4.5 Ω | = |  3.0A | * |  12V  | = |  32W  |
+| USB-C PD   | 20V  | / | 8.0 Ω | = |  2.5A | * |  20V  | = |  50W  |
+| USB-C PD   | 20V  | / | 6.2 Ω | = |  3.2A | * |  20V  | = |  64W  |
+| DC Barrel  | 24V  | / | 8.0 Ω | = |  3.0A | * |  24V  | = |  72W  |
+| DC Barrel  | 24V  | / | 6.2 Ω | = |  3.8A | * |  24V  | = |  92W  |
+| EPR PD3.1  | 28V  | / | 8.0 Ω | = |  3.5A | * |  28V  | = |  98W  |
+| EPR PD3.1  | 28V  | / | 6.2 Ω | = |  4.5A | * |  28V  | = |  126W |
 
-The resistance of the tip is fixed, ~7.5 ohms for the TS100/Pinecil and ~4.5 ohms for the TS80(P).
 
-This means that for both irons, the power delivered to the soldering tip is proportional to the voltage used, squared.
-This is why the TS100 performs poorly when run off 12 V power supplies.
 
 ## Output Control & Regulation
 
-Both soldering irons use a FET to switch the power to the soldering iron tip. This is a P-MOSFET and its controlled via a small transistor circuit, which in turn is controlled via the STM32. The STM32 controls this PWM output proportional to the output from the PID control loop running in the software.
+These soldering irons use a FET to switch the power to the soldering iron tip. This is a P-MOSFET and its controlled via a small transistor circuit, which in turn is controlled via the MCU (i.e., STM32). The MCU controls this PWM output proportional to the output from the PID control loop running in the software.
+
+To measure the tip temperature in the iron, the iron has a small op-amp connected across the terminals at the cold end of the tip. This is setup to measure the voltage across the same terminals that are used to power the tip. In order to read the very small voltage generated by the [thermocouple cold junction](https://ralim.github.io/IronOS/Temperature/), the iron's output must be turned off for a moment.
+                                                                                                                                                                                                             
+Once the output is turned off (via the FET), the system has a recovery time as the tip capacitance discharges and the op-amp exits saturation. After this delay period, the MCU's ADC (analog-to-digital converter) samples the output of the op-amp 8 times quickly and then sets a flag to turn the PWM output back on.
+This enforces a small dead time in the output signal while this occurs, so there is a balance between sampling the temperature often to maintain a stable tip temperature control and sampling less often to increase the maximum power deliverable to the tip ([see Complexity of measurement](https://ralim.github.io/IronOS/Temperature/#complexity-of-measurement)).
 
-To measure the tip temperature in the iron, the iron has a small op-amp connected across the terminals, this is setup to measure the voltage across the same terminals that are used the power the tip. In order to be able to read the small voltage generated by the thermocouple junction, the irons output must be turned off.
-Once the output is turned off (via the FET), the system has a recovery time as the tip capacitance discharges and the op-amp exits saturation. After this delay period, the STM32 ADC samples the output of the op-amp 8 times quickly and then sets a flag to turn the PWM output back on.
-This enforces a small dead time in the output signal while this occurs, so there is a balance between sampling the temperature often to maintain stable tip temperature control and sampling less often to increase the maximum power deliverable to the tip

Documentation/Settings.md

@@ -43,7 +43,7 @@ When the device is powered by a battery, this adjusts the low voltage threshold
 
 On device help text:
 
-Power source. Sets cutoff voltage. (DC 10V) (S 3.3V per cell, disable power limit)
+Set cutoff voltage to prevent battery over-drain. (DC 10V) (S=3.3V per cell, disable PWR limit)
 
 ### Setting: Sleep temp
 
@@ -59,7 +59,7 @@ How long of a period without movement / button-pressing is required before the d
 
 On device help text:
 
-Interval before "sleep mode" kicks in (S=seconds | M=minutes)
+Interval before "sleep mode" starts (s=seconds | m=minutes)
 
 ### Setting: Shutdown timeout
 
@@ -67,7 +67,7 @@ How long of a period without movement / button-pressing is required before the d
 
 On device help text:
 
-Interval before the iron shuts down (M=minutes)
+Interval before the iron shuts down (m=minutes)
 
 ### Setting: Motion sensitivity
 
@@ -91,7 +91,7 @@ Should the device show an 'advanced' view on the idle screen. The advanced view
 
 On device help text:
 
-Display detailed information in a smaller font on the idle screen
+Display detailed info in a smaller font on idle screen
 
 ### Setting: Display orientation
 
@@ -107,7 +107,7 @@ When the unit is in soldering mode. You can hold down the button at the front of
 
 On device help text:
 
-Temperature used in "boost mode"
+Tip temperature used in "boost mode"
 
 ### Setting: Start-up behavior
 
@@ -115,7 +115,7 @@ When the device powers up, should it enter into a special mode. These settings s
 
 On device help text:
 
-O=off | S=soldering temp | Z=standby at sleep temp until moved | R=standby without heating until moved
+O=off | S=heat to soldering temp | Z=standby at sleep temp until moved | R=standby, heat-off until moved
 
 ### Setting: Cooldown flashing
 
@@ -123,25 +123,36 @@ If the idle screen should blink the tip temperature for attention while the tip
 
 On device help text:
 
-Flash the temperature reading after heating was halted while the tip is still hot
+Flash temperature reading at idle if tip is hot
 
-### Setting: Calibrate temperature?
+### Setting: Calibrate CJC at next boot
 
-Used to calibrate the ADC+Op-amp offsets for the tip. This calibration must be performed when the tip temperature and the handle temperature are equal. Generally not required unless your device is reading more than 5°C off target.
+Note:
+If the difference between the target temperature and the measured temperature is less than 5°C, **calibration is NOT required at all**.
+
+This is used to calibrate the offset between ADC and Op-amp of the tip **at next boot** (Ideally it has to be done at boot, before internal components get warm.). If the checkbox is set, the calibration will only be performed at the next boot. After a successful calibration the checkbox will be unchecked again! If you need to repeat the calibration however, you have to set the checkbox *again*, unplug your device and let it cool down to room/ambient temperature & power it up, ideally while it sits on the desk.
+
+Also, the calibration will only take place if both of the following conditions are met:
+- The tip must be installed.
+- The temperature difference between tip and handle must be less than 10°C. (~ ambient / room temperature)
+
+Otherwise, the calibration will be performed the next time the device is started and both conditions are met, unless the corresponding checkbox is unchecked.
+
+Hence, never repeat the calibration in quick succession!
 
 On device help text:
 
-Start tip temperature offset calibration
+Calibrate tip Cold Junction Compensation at the next boot (not required if Delta T is < 5°C)
 
-### Setting: Restore factory settings?
+### Setting: Restore default settings
 
 Resets all settings and calibrations to factory defaults. Does NOT erase custom user boot up logo's.
 
 On device help text:
 
-Reset all settings to default
+Reset default settings for this firmware ver.
 
-### Setting: Calibrate input voltage?
+### Setting: Calibrate input voltage
 
 Enters an adjustment mode where you can gradually adjust the measured voltage to compensate for any unit-to-unit variance in the voltage sense resistors.
 
@@ -155,7 +166,7 @@ Should the device show an 'advanced' soldering view. This is a text-based view t
 
 On device help text:
 
-Display detailed information in a smaller font on soldering screen
+Display detailed info in a smaller font on soldering screen
 
 ### Setting: Scrolling speed
 
@@ -227,7 +238,7 @@ If the unit has a hall effect sensor (Pinecil), this adjusts how sensitive it is
 
 On device help text:
 
-Sensitivity of the Hall effect sensor to detect sleep (O=off | L=low | M=medium | H=high)
+Sensitivity to magnets (0=off | 1=least sensitive | ... | 9=most sensitive)
 
 ### Setting: Allow locking buttons
 
@@ -243,7 +254,7 @@ When powered by a battery, this adjusts the minimum voltage per cell before shut
 
 On device help text:
 
-Minimum allowed voltage per cell (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)
+Minimum allowed voltage per battery cell (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)
 
 ### Setting: Anim. loop
 
@@ -291,7 +302,7 @@ Display brightness. Higher values age the OLED faster due to burn-in. (However,
 
 On device help text:
 
-Adjust the brightness of the OLED screen
+Adjust the OLED screen brightness
 
 ### Setting: Invert screen
 
@@ -299,16 +310,12 @@ Inverts the entire OLED.
 
 On device help text:
 
-Invert the colours of the OLED screen
+Invert the OLED screen colors
 
 ### Setting: Boot logo duration
 
-Sets the duration of the boot logo from 1 second to 4 seconds.
-- For static images this sets the time the logo is displayed for.
-- For animations this sets the time the last frame is displayed for after the animation has been played.
-
-The infinity icon sets a logo or the last frame of an animation to be displayed until a button is pressed.
+Sets the duration for the boot logo (s=seconds).
 
 On device help text:
 
-Sets the duration for the boot logo (S=seconds)
+Set Boot logo duration (off | s=seconds | infinity)

Documentation/Temperature.md

@@ -9,7 +9,7 @@ The downsides of this are twofold; one, it is made using non-optimal metals and
 
 ##  How a thermocouple works (brief)
 
-A thermocouple uses a junction of two dissimilar metals to create a very small amount of power (microvolts). This can then be measured and used with a known transfer function to derive the temperature of the junction.
+[Thermocouples use a junction of two dissimilar metals](https://www.youtube.com/watch?v=v7NUi88Lxi8) to create a very small amount of power (microvolts). This can then be measured and used with a known transfer function to derive the temperature of the junction.
 This has some fairly large limitations, but it also has the benefit of being extremely cheap.
 
 Conventionally a thermocouple is created using two dissimilar metals that join, and then the other ends of these metals are terminated to copper contacts. These copper contacts are also part of the construction of the thermocouple and are referred to as the cold junction.
@@ -17,7 +17,7 @@ As there are these extra two joins between the thermocouple wires and the copper
 
 If the cold junction is held at 0 degrees Celsius, then their effect is considered to be null, and so they can be ignored. However, in the real world the joins to copper are often at room temperature, and as such the measured voltage from the thermocouple must be compensated to remove the influence of these joints. This process is often called cold junction compensation.
 
-Every time in the circuit there is a join between two different metals, there is a small thermocouple created, this means that _every_ soldered connection is also one. 
+Every time in the circuit there is a join between two different metals, then a small thermocouple is created, this means that _every_ soldered connection is also one. 
 
 
 ## How these irons implement the temperature reading
@@ -27,32 +27,34 @@ This consists of an op-amp that is connected directly across the heating connect
 
 When the iron is **not** heating the tip, the microcontroller uses the ADC to read the output from the op-amp. This produces a voltage that _should_ be linear to the temperature of (tip-handle). This value is then offset compensated (to remove ADC+op-amp offsets), and then converted into a temperature delta in °C/K. This temperature delta can then be added to the handle temperature to derive the tip temperature in degrees Celsius.
 
-Depending on the construction of the tip, the lookup values used for converting the tip reading in µV into °C/K varies. It is worth noting, however, that TS100 and Pinecil tips are approximately the same as the Hakko T12 tips. (In @Ralim's testing, to within measurement error). This makes sense as these tips are cheap and would have made an excellent design for Miniware to have cloned in making the TS100 in the first place.
+Depending on the construction of the tip, the lookup values used for converting the tip reading in µV into °C/K varies. It is worth noting, however, that TS100 and Pinecil tips are approximately the same as the Hakko T12 tips. (In @Ralim's testing, to within measurement error). This makes sense as the T12 tips are an excellent and cheap design for Miniware to mimic in making the TS100 in the first place.
 
 ## Implications of this
 
 ### Reading accuracy vs Heating performance tradeoff
 
-Because the tip can only be measured when the unit is not heating, the more often the tip is measured (for finer temperature control) the less time the unit can spend heating up the tip. This means that for fast heat up and fine temperature control the firmware now implements two speeds to the controller loop. During heating up the system runs fewer temperature measurements and instead allows the tip to spend more time burning power. Once the unit is up to temperature the rate of taking temperature readings is doubled to allow for faster reaction times.
+Because the tip can only be measured when the unit is not heating, the more often the tip is measured (for finer temperature control) the less time the unit can spend heating up the tip. This means that for fast heat up and fine temperature control the firmware now implements two speeds to the controller loop. During heating up the system runs fewer temperature measurements and instead allows the tip to spend more time burning power. Once the unit is up to temperature, the rate of taking temperature readings is doubled to allow for faster reaction times.
 
 ### Tip heat up lag time
 
 As the temperature sensor is a part of the heater coil inside of the tip (or very close by, not entirely certain); the temperature reading is of the _inside_ of the tip, rather than the outside. The outside temperature is the most critical for the user as this is where the solder is actually melting and performing work.
 
-The PID controller in the firmware is tuned to be slightly underdamped and thus more "jumpy" than some people would expect. This is based on the theory that if the inside of the tip is seeing the temperature droop; the outside temperature has dropped more and so we should overcompensate until they equalise.
+The PID controller in the firmware is tuned to be slightly underdamped and thus more "jumpy" than some people would expect. This is based on the theory that if the inside of the tip is seeing the temperature drop; the outside temperature has dropped more and so we should overcompensate until they equalise.
 
 This is why sometimes the temperature may flick around a little during use but the tip temperature itself is quite stable. The thermal mass of the tip smooths these small amounts out nicely for the user. Though seeing larger jumps on some tips than others _may_ indicate that the tip does not have optimal internal thermal bonding between the heater coil and the tip itself.
 
-The firmware uses the theory that these irons are more towards the power users territory than most, so it tries to not hide the actual temperature. What some soldering iron controllers do is that they hide the actual measurement once you are within a certain tolerance of this. For example, on a digital Weller unit Ralim has to hand, if set to 350 °C, it will regulate to within around +-3 °C but not indicate you are outside of this bad until you exceed +-5 °C. This gives the illusion that it's holding the temperature perfectly when in actuality it's moving around as well.
+The firmware uses the theory that these irons are aimed more to the power users territory than most, so it tries to _not_ hide the actual temperature. Some soldering iron controllers hide the actual measurement once you are within a certain tolerance of this. For example, on a digital Weller unit that Ralim has, if set to 350 °C, it will regulate to within around +/- 3°C but not indicate you are outside of the margin of error until you exceed +/- 5°C. This gives the illusion that it's holding the temperature perfectly when in actuality it's moving around as well.
 
 Given enough time (3-5 seconds) with no external cooling, the inside and outside temperatures of the tip will be equal. When testing the tip temperature accuracy try to allow time for the system to stabilise.
 
 ### Complexity of measurement
 
-The firmware in these irons does a best-effort of calculating an accurate temperature, but as always there is a tradeoff between perfect accuracy and firmware complexity and setup. As these irons are built down to a cost, expecting accuracy greater than 1% is not really an option as the voltage reference is only 1% accurate at best. So _all_ measurements are affected by its accuracy. And the low-cost chips used in the irons do not come calibrated from the factory so we do not have an internal calibration we can use to try and measure this inaccuracy.
+The firmware in these irons does a *best-effort* of calculating an accurate temperature. As always there is a tradeoff between perfect accuracy and firmware complexity and setup. These irons are built down to a cost; expecting accuracy greater than 1% is not really an option as the voltage reference is only 1% accurate at best. So _all_ measurements are affected by its accuracy. The low-cost chips used in the irons do not come calibrated from the factory so we do not have an internal calibration we can use to try and measure this inaccuracy.
 
-The firmware only accounts for cold junction compensation and then treats the remaining error as being a constant offset. 
+The firmware only accounts for [cold junction compensation](https://www.tegam.com/what-exactly-is-cold-junction-compensation/) and then treats the remaining error as being a constant offset. 
 While the error is small, it is actually composed of both a constant offset as well as an offset that is linear to the handle temperature.
-This offset that is linear to handle temperature is as of current not modelled into the firmware and there is assumed to be constant. This is generally "close enough" as once the unit is in use, the handle temperature is usually within 10 °C as the components inside warm-up from use. This means that this error is "relatively" constant once the unit is being used. However, this can cause odd behaviour when the tip temperature ~= room temperature. And can cause some jumping and movement in the readings when attempting to control the tip to sub 100 °C.
+This offset that is linear to handle temperature is as of current not modelled into the firmware and is assumed to be constant. This is generally *close enough* as once the unit is in use, the handle temperature is usually within 10 °C as the components inside warm-up from use. This means that this error is "relatively" constant once the unit is being used. 
+
+`However, this can cause odd behaviour when the tip temperature ~= room temperature. It can cause some jumping and movement in the readings when attempting to control the tip to sub 100 °C.`
 
 This is a known tradeoff that is made as the irons intended use case means that it will spend most of its time above 150 °C, at which point these errors are no longer the dominant error sources in the system.

Documentation/Troubleshooting.md

@@ -2,22 +2,23 @@
 
 If your device is not operating as expected; and you are within the manufacturer support window, please first contact your manufacturer and RMA / warranty your device.
 
-If your iron is not working as expected, [the Debug menu](DebugMenu.md) exposes internal measurements to help you narrow down the root cause of the issue.
+If your iron is not working as expected, [the Debug menu](https://ralim.github.io/IronOS/DebugMenu/) exposes internal measurements to help you narrow down the root cause of the issue.
 
 Alongside all of these, issues with the soldering of the main MCU could cause all of these as well; and should always be checked.
 
 The tip is important for the operation of your iron. T100 and Pinecil tips are around 8 ohms, and TS80(P) tips are around 4.5 ohms.
 
-You are welcome to open discussions about issues as well, or if you bought your Pinecil from an official store; use the Pinecil community chat for support.
+You are welcome to open discussions about issues as well, or if you bought your Pinecil from an official store; use the [Pinecil community chat](https://wiki.pine64.org/wiki/Pinecil#Community_links) for support.
 But it is helpful to do some basic diagnostics first just in case the issue is easily fixed.
+
 The **VAST** majority of issues are poor soldering or cold solder joints.
-If you can open up your iron, give it a good look at all the connection points, and use another iron to reflow any suspicious ones, can fix most issues.
+If you can open up your iron, give it a good look at all the connection points, and use another iron to reflow any suspicious ones, this can fix most issues.
 
 ## High tip temp reading when the tip is cool
 
 If you are finding the tip is reading high; the first fields to check in the Debug menu are `RTip` and `CHan`.
 
-- `RTip` is the raw tip reading in μV; at cool this should be around 700-1000 for Larger tips and ~1500 for smaller tips (TS80's)
+- `RTip` is the raw tip reading in μV; at cool this should be around 700-1000 for larger tips and ~1500 for smaller tips (TS80's)
 - `CHan` is the temperature of the temperature sensor on the PCB in degrees Celsius \* 10. So 29 °C ambient should read as 290
 
 ### RTip is out of spec
@@ -28,45 +29,47 @@ If `RTip` is overreading, you may have one of the following:
 
 - Partially stuck on main MOSFET
 - Slow reacting main MOSFET driver transistor
-- Damaged op-amp
-- Poor soldering on the op-amp circuitry
+- Damaged Op-Amp
+- Poor soldering on the Op-Amp circuitry
 - No tip inserted or tip that is not connecting correctly
 
-If `RTip` is under-reading you most likely have issues with the op-amp or the tip. The signal should be pulled high by hardware (reading hot), so this often means the MCU is not reading the signal correctly. Check MCU soldering.
+If `RTip` is under-reading you most likely have issues with the Op-Amp or the tip. The signal should be pulled high by hardware (reading hot), so this often means the MCU is not reading the signal correctly. Check MCU soldering.
 
 ### CHan is out of spec
 
 CHan reading comes directly from the cold junction compensation temperature sensor.
-This is usually a TMP36, or an NTC thermistor (MHP30, TS80P).
+This is usually a TMP36 (Pinecil V1), or an NTC thermistor (MHP30, TS80P, Pinecil V2).
 
 If `CHan` is reading low:
 
 - Check the connection from the MCU to the handle temperature sensor.
 - Check the power pin connection on the TMP36
 - Check pullup resistor on the NTC thermistor
-- Check no bridged pins or weak shorts on the signal to nearby pins on MCU or temp sensor
+- Check no bridged pins or weak shorts on the signal to nearby pins on MCU or temperature sensor
+- Reflow/resolder the aforementioned components
 
 If `CHan` is reading higher
 
 - Check ground connections on the sensors
-- Check no bridged pins or weak shorts on the signal to nearby pins on MCU or temp sensor
+- Check no bridged pins or weak shorts on the signal to nearby pins on MCU or temperature sensor
+- Reflow/resolder the aforementioned components
 
 ## No display OR dots on the display
 
 If when you power up your iron you get no display, the first test is to (carefully) attempt to heat the tip.
-Press the front button on your device and check if the tip heads up.
+Press the front button (`+/A`) on your device and check if the tip heats up.
 If the tip does not heat up, it is worth trying to reflash the firmware first in case it is corrupted.
 
 The main failure mode of the OLED display module is usually poor soldering on the OLED display cable to the main PCB.
 As this is soldered by hand generally, it's the most prone to failures.
 
-If you have a poor connection or a floating pin, you can end up with a state where the screen works _sometimes_ and then freezes or only works on some power cycles.
+If you have a poor connection or a floating pin, you can end up with a state where the screen works _sometimes_ and then freezes or only works on some power cycles. It might work on very old versions of IronOS but not the newest ones. You could try to reflow the pins for the OLED. On 96x16 screens, carefully peel it back from the adhesive and reflow the solder on the pins. If needed, replacement Oled screens are common and low cost.
 
 As the OLED runs on an I2C bus, there are pull up resistors on the SDA and SCL pins. It is worth checking these as well, while they don't often fail, issues with these can cause _weird_ display issues.
 
 ## Tip heats when not in heating mode
 
-** DISCONNECT YOUR TIP **
+⚠️ DISCONNECT YOUR TIP ⚠️
 
 Most likely you have either a blown MOSFET or shorted pin.
 Check the MOSFET and also its driver transistor.
@@ -74,4 +77,4 @@ The firmware will not enable the tip until you are in soldering mode.
 
 ## Accelerometer not detected
 
-This could be that your Iron has a new accelerometer that is not supported yet (happens every year or so) OR there is a soldering issue with the accelerometer
+Your Iron may have a new accelerometer that is not supported yet (happens every year or so) OR there is a soldering issue with the accelerometer (reflow/resolder).

Documentation/index.md

@@ -0,0 +1,72 @@
+# IronOS - Flexible Soldering iron control Firmware
+
+The firmware implements all of the standard features of a 'smart' soldering iron, with lots of little extras and tweaks.
+I highly recommend reading the installation guide fully when installing on your iron. And after install just explore the settings menu.
+
+For soldering irons that are designed to be powered by 'smart' power sources (PD and QC), the firmware supports settings around the negotiated power and voltage.
+For soldering irons that are designed to be powered by batteries (TS100 & Pinecil), settings for a cutoff voltage for battery protection are supported.
+
+Currently **31** languages are supported. When downloading the firmware for your soldering iron, take note of the language code in the file name.
+
+This project is considered feature complete for use as a soldering iron, _so please suggest any feature improvements you would like!_
+
+_This firmware does **NOT** support the USB port while running for changing settings. This is done through the onscreen menu only. Logos are edited on a computer and flashed like firmware._
+
+|   Device   | DC  | QC  | PD  | EPR | BLE | Battery | Recommended |
+| :--------: | :-: | :-: | :-: | :-: | :-: | :-----: | :---------: |
+|   MHP30    | ❌  | ❌  | ✔️  | ❌  | ❌  |   ❌    |     ✔️      |
+| Pinecil V1 | ✔️  | ✔️  | ✔️  | ❌  | ❌  |   ✔️    |     ✔️      |
+| Pinecil V2 | ✔️  | ✔️  | ✔️  | ✔️  | ✔️  |   ✔️    |     ✔️      |
+|   TS80P    | ❌  | ✔️  | ✔️  | ❌  | ❌  |   ✔️    |     ✔️      |
+|   TS100    | ✔️  | ❌  | ❌  | ❌  | ❌  |   ✔️    |     ❌      |
+|    TS80    | ❌  | ✔️  | ❌  | ❌  | ❌  |   ✔️    |     ❌      |
+
+\*Please note that Miniware started shipping TS100's using cloned STM32 Chips. While these do work with IronOS, their DFU bootloader works terribly, and it is hard to get it to successfully flash larger firmware images like IronOS without timing out. This is the main reason why the TS100 is **_no longer recommended_**.
+
+## Getting Started
+
+To get started with IronOS firmware, please jump to [Getting Started Guide](https://ralim.github.io/IronOS/GettingStarted/).
+But the [TL;DR](https://www.merriam-webster.com/dictionary/TL%3BDR) is to press the button near the front of the iron to heat up. Use the button near the back of the iron to enter the settings menu.
+Long hold the rear button in soldering mode to exit back to the start screen.
+
+## Installation
+
+For notes on installation for your device, please refer to the flashing guide for your device:
+
+- [MHP30](https://ralim.github.io/IronOS/Flashing/MHP30)
+- [Pinecil V1](https://ralim.github.io/IronOS/Flashing/Pinecil%20V1/)
+- [Pinecil V2](https://ralim.github.io/IronOS/Flashing/Pinecil%20V2/)
+- [TS80 / TS80P](https://ralim.github.io/IronOS/Flashing/TS80%28P%29/)
+- [TS100](https://ralim.github.io/IronOS/Flashing/TS100)
+
+## Key Features
+
+- PID style iron temperature control
+- Automatic sleep with selectable sensitivity
+- Motion wake support
+- All settings exposed in the intuitive menu
+- (TS100) Set a voltage lower limit for Lithium batteries so you don't kill your battery pack
+- (TS80) Set 18 W or 24 W settings for your power bank
+- (TS80P) Automatically negotiates appropriate PD and falls back to QC mode like TS80
+- (Pinecil) Supports all 3 power modes (PD, QC, DC In).
+- (Pinecilv2) Supports USB-PD EPR for 28V operation.
+- Improved readability Fonts, supporting multiple languages
+- Use hardware features to improve reliability
+- Can disable movement detection if desired
+- Boost mode lets you temporarily change the temperature when soldering (i.e. raise the temperature for short periods)
+- (TS100/Pinecil) Battery charge level indicator if power source set to a lipo cell count
+- (TS80/TS80P/Pinecil) Power bank operating voltage is displayed
+- [Custom boot up logo support](https://ralim.github.io/IronOS/Logo/)
+- Automatic LCD rotation based on the orientation
+
+## Menu System
+
+This new firmware uses a new menu system to allow access to the settings on the device.
+When on the main screen and having the tip plugged in, the unit shows a pair of prompts for the two most common operations.
+
+- Pressing the button near the tip enters the _soldering mode_
+- Pressing the button near the USB end enters the _settings menu_
+- When not in _soldering mode_, holding down the button near the tip will enter _soldering temperature adjust mode_ (This is the same as the one in the _soldering mode_, but allows to adjust the temperature before heating up), in _soldering mode_ however this will activate _boost mode_ as long as you hold down the button.
+- Holding down the button near the USB end will show the _[debug menu](https://ralim.github.io/IronOS/DebugMenu/)._ In _soldering mode_ this ends the heating.
+
+Operation details are over in the [Menu information.](https://ralim.github.io/IronOS/Menu/)

README.md

@@ -8,25 +8,44 @@ _This repository was formerly known as TS100, it's the same great code. Just wit
 
 Originally conceived as an alternative firmware for the TS100, this firmware has evolved into a complex soldering iron control firmware.
 
-The firmware implements all of the standard features of a "smart" soldering iron, with lots of little extras and tweaks.
+The firmware implements all of the standard features of a 'smart' soldering iron, with lots of little extras and tweaks.
 I highly recommend reading the installation guide fully when installing on your iron. And after install just explore the settings menu.
 
-For soldering irons that are designed to be powered by "smart" power sources (QC and PD), the firmware supports settings around the negotiated power and voltage.
+For soldering irons that are designed to be powered by 'smart' power sources (PD and QC), the firmware supports settings around the negotiated power and voltage.
 For soldering irons that are designed to be powered by batteries (TS100 & Pinecil), settings for a cutoff voltage for battery protection are supported.
 
-There are 30 languages currently supported as of present. When downloading the firmware for your soldering iron take note of the language code in the file name.
+Currently **31** languages are supported. When downloading the firmware for your soldering iron, take note of the language code in the file name.
 
 This project is considered feature complete for use as a soldering iron, _so please suggest any feature improvements you would like!_
 
-_This firmware does **NOT** support the USB port while running for changing settings. This is done through the onscreen menu only. Logos are edited using the tool or python script and uploaded in DFU mode._
+_This firmware does **NOT** support the USB port while running for changing settings. This is done through the onscreen menu only. Logos are edited on a computer and flashed like firmware._
 
-To get started with this firmware, please jump over to [here](Documentation/GettingStarted.md).
+|   Device   | DC  | QC  | PD  | EPR | BLE | Battery | Recommended |
+| :--------: | :-: | :-: | :-: | :-: | :-: | :-----: | :---------: |
+|   MHP30    | ❌  | ❌  | ✔️  | ❌  | ❌  |   ❌    |     ✔️      |
+| Pinecil V1 | ✔️  | ✔️  | ✔️  | ❌  | ❌  |   ✔️    |     ✔️      |
+| Pinecil V2 | ✔️  | ✔️  | ✔️  | ✔️  | ✔️  |   ✔️    |     ✔️      |
+|   TS80P    | ❌  | ✔️  | ✔️  | ❌  | ❌  |   ✔️    |     ✔️      |
+|   TS100    | ✔️  | ❌  | ❌  | ❌  | ❌  |   ✔️    |     ❌      |
+|    TS80    | ❌  | ✔️  | ❌  | ❌  | ❌  |   ✔️    |     ❌      |
+
+\*Please note that Miniware started shipping TS100's using cloned STM32 Chips. While these do work with IronOS, their DFU bootloader works terribly, and it is hard to get it to successfully flash larger firmware images like IronOS without timing out. This is the main reason why the TS100 is **_no longer recommended_**.
+
+## Getting Started
+
+To get started with IronOS firmware, please jump to [Getting Started Guide](https://ralim.github.io/IronOS/GettingStarted/).
 But the [TL;DR](https://www.merriam-webster.com/dictionary/TL%3BDR) is to press the button near the front of the iron to heat up. Use the button near the back of the iron to enter the settings menu.
 Long hold the rear button in soldering mode to exit back to the start screen.
 
 ## Installation
 
-For notes on installation for your device, please refer to the [Flashing Guide](Documentation/Flashing.md).
+For notes on installation for your device, please refer to the flashing guide for your device:
+
+- [MHP30](https://ralim.github.io/IronOS/Flashing/MHP30)
+- [Pinecil V1](https://ralim.github.io/IronOS/Flashing/Pinecil%20V1/)
+- [Pinecil V2](https://ralim.github.io/IronOS/Flashing/Pinecil%20V2/)
+- [TS80 / TS80P](https://ralim.github.io/IronOS/Flashing/TS80%28P%29/)
+- [TS100](https://ralim.github.io/IronOS/Flashing/TS100)
 
 ## Key Features
 
@@ -38,13 +57,14 @@ For notes on installation for your device, please refer to the [Flashing Guide](
 - (TS80) Set 18 W or 24 W settings for your power bank
 - (TS80P) Automatically negotiates appropriate PD and falls back to QC mode like TS80
 - (Pinecil) Supports all 3 power modes (PD, QC, DC In).
+- (Pinecilv2) Supports USB-PD EPR for 28V operation.
 - Improved readability Fonts, supporting multiple languages
 - Use hardware features to improve reliability
 - Can disable movement detection if desired
 - Boost mode lets you temporarily change the temperature when soldering (i.e. raise the temperature for short periods)
 - (TS100/Pinecil) Battery charge level indicator if power source set to a lipo cell count
 - (TS80/TS80P/Pinecil) Power bank operating voltage is displayed
-- [Custom boot up logo support](Documentation/Logo.md)
+- [Custom boot up logo support](https://ralim.github.io/IronOS/Logo/)
 - Automatic LCD rotation based on the orientation
 
 ## Menu System
@@ -52,17 +72,17 @@ For notes on installation for your device, please refer to the [Flashing Guide](
 This new firmware uses a new menu system to allow access to the settings on the device.
 When on the main screen and having the tip plugged in, the unit shows a pair of prompts for the two most common operations.
 
-- Pressing the button near the tip enters the *soldering mode*
-- Pressing the button near the USB end enters the *settings menu*
-- When not in *soldering mode*, holding down the button near the tip will enter *soldering temperature adjust mode* (This is the same as the one in the *soldering mode*, but allows to adjust the temperature before heating up), in *soldering mode* however this will activate *boost mode* as long as you hold down the button.
-- Holding down the button near the USB end will show the *[debug menu](Documentation/DebugMenu.md).* In *soldering mode* this ends the heating.
+- Pressing the button near the tip enters the _soldering mode_
+- Pressing the button near the USB end enters the _settings menu_
+- When not in _soldering mode_, holding down the button near the tip will enter _soldering temperature adjust mode_ (This is the same as the one in the _soldering mode_, but allows to adjust the temperature before heating up), in _soldering mode_ however this will activate _boost mode_ as long as you hold down the button.
+- Holding down the button near the USB end will show the _[debug menu](https://ralim.github.io/IronOS/DebugMenu/)._ In _soldering mode_ this ends the heating.
 
-Operation details are over in the [Menu information.](Documentation/Menu.md)
+Operation details are over in the [Menu information.](https://ralim.github.io/IronOS/Menu/)
 
 ## Thanks
 
 If you love this firmware and want to continue my caffeine addiction, you can do so [here](https://paypal.me/RalimTek) (or email me for other options).
-I also want to give a shout out to all of the [Fantastic Contributors](https://github.com/Ralim/ts100/graphs/contributors).
+I also want to give a shout out to all of the [Fantastic Contributors](https://github.com/Ralim/IronOS/graphs/contributors).
 
 Especially to the following users, who have helped in various ways that are massively appreciated:
 

Translations/font_tables.py

@@ -989,6 +989,14 @@ NAME_CYRILLIC: Final = "cyrillic"
 NAME_CJK: Final = "cjk"
 NAME_GREEK: Final = "greek"
 
+ALL_FONTS = [
+    NAME_ASCII_BASIC,
+    NAME_LATIN_EXTENDED,
+    NAME_CYRILLIC,
+    NAME_GREEK,
+    NAME_CJK,  # CJK must come last
+]
+
 
 def get_font_maps_for_name(
     font_name: str,

Translations/gen_menu_docs.py

@@ -1,18 +1,15 @@
 #!/usr/bin/env python3
 
-import argparse
-import functools
-import hashlib
 import json
 import logging
 import os
 import sys
-from dataclasses import dataclass
 from pathlib import Path
-from typing import Dict, List
+
 
 logging.basicConfig(stream=sys.stdout, level=logging.DEBUG)
 
+
 HERE = Path(__file__).resolve().parent
 TRANSLATION_DEFS_PATH = os.path.join(HERE, "translations_def.js")
 ENGLISH_TRANSLATION_PATH = os.path.join(HERE, "translation_EN.json")

Translations/make_translation.py

@@ -11,9 +11,8 @@ import re
 import subprocess
 import sys
 from datetime import datetime
-from itertools import chain
 from pathlib import Path
-from typing import BinaryIO, Dict, List, Optional, TextIO, Tuple, Union
+from typing import Dict, List, Optional, TextIO, Tuple, Union
 from dataclasses import dataclass
 
 from bdflib import reader as bdfreader
@@ -120,19 +119,22 @@ def get_constants(build_version: str) -> List[Tuple[str, str]]:
 def get_debug_menu() -> List[str]:
     return [
         datetime.today().strftime("%d-%m-%y"),
-        "HW G ",
-        "HW M ",
-        "HW P ",
-        "Time ",
-        "Move ",
-        "RTip ",
-        "CTip ",
-        "CHan ",
-        "Vin  ",
-        "ACC  ",
-        "PWR  ",
-        "Max  ",
-        "Hall ",
+        "ID ",
+        "ACC   ",
+        "PWR   ",
+        "Vin        ",
+        "Tip C  ",
+        "Han C  ",
+        "Max C  ",
+        "UpTime ",
+        "Move   ",
+        "Tip Res",
+        "Tip R  ",
+        "Tip O  ",
+        "HW G   ",
+        "HW M   ",
+        "HW P   ",
+        "Hall   ",
     ]
 
 
@@ -354,16 +356,11 @@ class FontMapsPerFont:
     sym_lists: Dict[str, List[str]]
 
 
-def get_font_map_per_font(text_list: List[str], fonts: List[str]) -> FontMapsPerFont:
+def get_font_map_per_font(text_list: List[str]) -> FontMapsPerFont:
     pending_sym_set = set(text_list)
     if len(pending_sym_set) != len(text_list):
         raise ValueError("`text_list` contains duplicated symbols")
 
-    if fonts[0] != font_tables.NAME_ASCII_BASIC:
-        raise ValueError(
-            f'First item in `fonts` must be "{font_tables.NAME_ASCII_BASIC}"'
-        )
-
     total_symbol_count = len(text_list)
     # \x00 is for NULL termination and \x01 is for newline, so the maximum
     # number of symbols allowed is as follow (see also the comments in
@@ -379,7 +376,7 @@ def get_font_map_per_font(text_list: List[str], fonts: List[str]) -> FontMapsPer
     font12_maps: Dict[str, Dict[str, bytes]] = {}
     font06_maps: Dict[str, Dict[str, Optional[bytes]]] = {}
     sym_lists: Dict[str, List[str]] = {}
-    for font in fonts:
+    for font in font_tables.ALL_FONTS:
         font12_maps[font] = {}
         font12_map = font12_maps[font]
         font06_maps[font] = {}
@@ -387,12 +384,6 @@ def get_font_map_per_font(text_list: List[str], fonts: List[str]) -> FontMapsPer
         sym_lists[font] = []
         sym_list = sym_lists[font]
 
-        if len(pending_sym_set) == 0:
-            logging.warning(
-                f"Font {font} not used because all symbols already have font bitmaps"
-            )
-            continue
-
         if font == font_tables.NAME_CJK:
             is_cjk = True
         else:
@@ -420,30 +411,45 @@ def get_font_map_per_font(text_list: List[str], fonts: List[str]) -> FontMapsPer
             sym_list.append(sym)
             pending_sym_set.remove(sym)
 
-        if len(sym_list) == 0:
-            logging.warning(f"Font {font} not used by any symbols on the list")
     if len(pending_sym_set) > 0:
-        raise KeyError(f"Symbols not found in specified fonts: {pending_sym_set}")
+        raise KeyError(f"Symbols not found in our fonts: {pending_sym_set}")
 
     return FontMapsPerFont(font12_maps, font06_maps, sym_lists)
 
 
 def get_forced_first_symbols() -> List[str]:
-    forced_first_symbols = ["0", "1", "2", "3", "4", "5", "6", "7", "8", "9"]
+    forced_first_symbols = [
+        "0",
+        "1",
+        "2",
+        "3",
+        "4",
+        "5",
+        "6",
+        "7",
+        "8",
+        "9",
+        "a",
+        "b",
+        "c",
+        "d",
+        "e",
+        "f",
+    ]
     return forced_first_symbols
 
 
 def get_sym_list_and_font_map(
-    text_list: List[str], fonts: List[str]
+    text_list: List[str],
 ) -> Tuple[List[str], Dict[str, List[str]], FontMap]:
-    font_maps = get_font_map_per_font(text_list, fonts)
+    font_maps = get_font_map_per_font(text_list)
     font12_maps = font_maps.font12_maps
     font06_maps = font_maps.font06_maps
 
     # Build the full font maps
     font12_map = {}
     font06_map = {}
-    for font in fonts:
+    for font in font_tables.ALL_FONTS:
         font12_map.update(font12_maps[font])
         font06_map.update(font06_maps[font])
 
@@ -569,7 +575,6 @@ def prepare_language(lang: dict, defs: dict, build_version: str) -> LanguageData
     # Iterate over all of the text to build up the symbols & counts
     text_list, _ = get_letter_counts(defs, lang, build_version)
     # From the letter counts, need to make a symbol translator & write out the font
-    fonts = lang["fonts"]
 
     forced_first_symbols = get_forced_first_symbols()
 
@@ -578,7 +583,7 @@ def prepare_language(lang: dict, defs: dict, build_version: str) -> LanguageData
         x for x in text_list if x not in forced_first_symbols
     ]
 
-    sym_list, sym_lists_by_font, font_map = get_sym_list_and_font_map(text_list, fonts)
+    sym_list, sym_lists_by_font, font_map = get_sym_list_and_font_map(text_list)
     return LanguageData(
         [lang], defs, build_version, sym_list, sym_lists_by_font, font_map
     )
@@ -592,13 +597,6 @@ def prepare_languages(
 
     forced_first_symbols = get_forced_first_symbols()
 
-    all_fonts = [
-        font_tables.NAME_ASCII_BASIC,
-        font_tables.NAME_LATIN_EXTENDED,
-        font_tables.NAME_CYRILLIC,
-        font_tables.NAME_CJK,
-    ]
-
     # Build the full font maps
     font12_map = {}
     font06_map = {}
@@ -606,12 +604,11 @@ def prepare_languages(
     total_sym_counts: Dict[str, Dict[str, int]] = {}
     for lang in langs:
         text_list, sym_counts = get_letter_counts(defs, lang, build_version)
-        fonts = lang["fonts"]
         text_list = forced_first_symbols + [
             x for x in text_list if x not in forced_first_symbols
         ]
-        font_maps = get_font_map_per_font(text_list, fonts)
-        for font in fonts:
+        font_maps = get_font_map_per_font(text_list)
+        for font in font_tables.ALL_FONTS:
             font12_map.update(font_maps.font12_maps[font])
             font06_map.update(font_maps.font06_maps[font])
         for font, font_sym_list in font_maps.sym_lists.items():
@@ -624,7 +621,7 @@ def prepare_languages(
 
     sym_lists_by_font: Dict[str, List[str]] = {}
     combined_sym_list = []
-    for font in all_fonts:
+    for font in font_tables.ALL_FONTS:
         if font not in total_sym_counts:
             continue
         # swap to Big -> little sort order
@@ -825,7 +822,10 @@ def write_languages(
                     symbol_conversion_table,
                 )
             font_table_text += f"}}; // font_table_data_{font}\n"
-            current_sym_start = combined_sym_list.index(current_sym_list[0]) + 2
+            if len(current_sym_list) == 0:
+                current_sym_start = 0
+            else:
+                current_sym_start = combined_sym_list.index(current_sym_list[0]) + 2
             font_section_info_text += (
                 "  {\n"
                 f"    .symbol_start = {current_sym_start},\n"
@@ -852,6 +852,9 @@ def write_languages(
             "const FontSectionDataInfo FontSectionDataInfos[] = {\n"
         )
         for font, current_sym_list in sym_lists_by_font.items():
+            print(font, current_sym_list)
+            if len(current_sym_list) == 0:
+                continue
             current_sym_start = combined_sym_list.index(current_sym_list[0]) + 2
             font_uncompressed = bytearray()
             for sym in current_sym_list:

Translations/translation_BE.json

@@ -1,207 +1,341 @@
-{
-  "languageCode": "BE",
-  "languageLocalName": "Беларуская",
-  "fonts": ["ascii_basic", "latin_extended", "cyrillic"],
-  "tempUnitFahrenheit": false,
-  "messages": {
-    "SettingsCalibrationWarning": "Перад тым, як працягнуць, каліласка, упэўнецеся, што джала мае комнатную тэмпературу!",
-    "SettingsResetWarning": "Вы ўпэннены, што жадаеце зкінуць налады да першапачатковых значэнняў?",
-    "UVLOWarningString": "НАПРУГА--",
-    "UndervoltageString": "Нізкая напруга",
-    "InputVoltageString": "Сілкаванне В: ",
-    "SleepingSimpleString": "Zzzz",
-    "SleepingAdvancedString": "Чаканне...",
-    "SleepingTipAdvancedString": "Джала:",
-    "OffString": "Выкл."
-  },
-  "messagesWarn": {
-    "ResetOKMessage": "Скід OK",
-    "SettingsResetMessage": ["Налады", "зкінуты!"],
-    "NoAccelerometerMessage": ["Ня вызначаны", "акселерометр!"],
-    "NoPowerDeliveryMessage": ["Няма USB-PD IC", "выяўлены!"],
-    "LockingKeysString": "ЗАМКНУТЫ",
-    "UnlockingKeysString": "АДЫМКНУТЫ",
-    "WarningKeysLockedString": "!ЗАМКНУТЫ!",
-    "WarningThermalRunaway": ["Цеплавы", "Уцякач"]
-  },
-  "characters": {
-    "SettingRightChar": "П",
-    "SettingLeftChar": "Л",
-    "SettingAutoChar": "А",
-    "SettingOffChar": "O",
-    "SettingSlowChar": "М",
-    "SettingMediumChar": "С",
-    "SettingFastChar": "Х",
-    "SettingStartNoneChar": "В",
-    "SettingStartSolderingChar": "П",
-    "SettingStartSleepChar": "Ч",
-    "SettingStartSleepOffChar": "К",
-    "SettingSensitivityOff": "А",
-    "SettingSensitivityLow": "Н",
-    "SettingSensitivityMedium": "С",
-    "SettingSensitivityHigh": "В",
-    "SettingLockDisableChar": "А",
-    "SettingLockBoostChar": "Т",
-    "SettingLockFullChar": "П"
-  },
-  "menuGroups": {
-    "PowerMenu": {
-      "text2": ["Налады", "сілкавання"],
-      "desc": "Крыніца сілкавання і мінімальная напруга на ячэйку"
-    },
-    "SolderingMenu": {
-      "text2": ["Налады", "пайкі"],
-      "desc": "Налады пайкі"
-    },
-    "PowerSavingMenu": {
-      "text2": ["Рэжымы", "сну"],
-      "desc": "Налады рэжыму чакання"
-    },
-    "UIMenu": {
-      "text2": ["Налады", "інтэрфейсу"],
-      "desc": "Карыстальніцкія налады знешняга выгляду"
-    },
-    "AdvancedMenu": {
-      "text2": ["Дадатковыя", "налады"],
-      "desc": "Дадатковыя налады"
-    }
-  },
-  "menuOptions": {
-    "DCInCutoff": {
-      "text2": ["Крыніца", "сілкавання"],
-      "desc": "Крыніца сілкавання. Усталюе напругу адсечкі. (DC 10В) (S 3,3В на ячэйку, без абмежавання магутнасці)"
-    },
-    "SleepTemperature": {
-      "text2": ["Тэмп.", "чакання"],
-      "desc": "Тэмпература рэжыму чакання"
-    },
-    "SleepTimeout": {
-      "text2": ["Таймаўт", "чакання"],
-      "desc": "Час да пераходу ў рэжым чакання (Хвіліны | Секунды)"
-    },
-    "ShutdownTimeout": {
-      "text2": ["Таймаут", "выключэння"],
-      "desc": "Час да адключэння паяльніка (Хвіліны)"
-    },
-    "MotionSensitivity": {
-      "text2": ["Адчувальнасць", "акселерометра"],
-      "desc": "Адчувальнасць акселерометра (0=Выкл. | 1=Мін. | ... | 9=Макс.)"
-    },
-    "TemperatureUnit": {
-      "text2": ["Адзінкі", "тэмпературы"],
-      "desc": "Адзінкі вымярэння тэмпературы (C=Цэльcія | F=Фарэнгейта)"
-    },
-    "AdvancedIdle": {
-      "text2": ["Падрабязны", "рэжым чакання"],
-      "desc": "Адлюстроўваць дэталёвую инфармацыю паменьшаным шрыфтом на экране чакання"
-    },
-    "DisplayRotation": {
-      "text2": ["Арыентацыя", "экрану"],
-      "desc": "Арыентацыя экрану (П=Правая рука | Л=Левая рука | А=Аўта)"
-    },
-    "BoostTemperature": {
-      "text2": ["t° турба", "рэжыму"],
-      "desc": "Тэмпература джала ў турба-рэжыме"
-    },
-    "AutoStart": {
-      "text2": ["Аўта", "старт"],
-      "desc": "Рэжым, у якім запускаецца паяльнік пры падачы сілкавання (В=Выкл. | П=Пайка | Ч=Чаканне | К=Чаканне пры комн. тэмп.)"
-    },
-    "CooldownBlink": {
-      "text2": ["Мігценне t°", "пры астуджэнні"],
-      "desc": "Міргаць тэмпературай на экране астуджэння, пакуль джага яшчэ гарачае"
-    },
-    "TemperatureCalibration": {
-      "text2": ["Каліброўка", "тэмпературы"],
-      "desc": "Каліброўка тэрмадатчыка джала"
-    },
-    "SettingsReset": {
-      "text2": ["Скід", "наладаў"],
-      "desc": "Скід наладаў да першапачатковых значэнняў"
-    },
-    "VoltageCalibration": {
-      "text2": ["Каліброўка", "напругі"],
-      "desc": "Каліброўка ўваходнай напругі (падоўжаны націск для выхаду)"
-    },
-    "AdvancedSoldering": {
-      "text2": ["Падрабязны", "экран пайкі"],
-      "desc": "Паказваць дэталёвую інформацыю на экране пайкі"
-    },
-    "ScrollingSpeed": {
-      "text2": ["Хуткацсь", "тексту"],
-      "desc": "Хуткасць гартання тэксту (М=марудна | Х=хутка)"
-    },
-    "QCMaxVoltage": {
-      "text2": ["Магутнасць", "сілкавання"],
-      "desc": "Магутнасць выкарыстоўваемай крыніцы сілкавання"
-    },
-    "PDNegTimeout": {
-      "text2": ["PD", "прыпынак"],
-      "desc": "Час чакання ўзгаднення PD з крокам 100 мс для сумяшчальнасці з некаторымі зараднымі зараднымі прыладамі QC (0: адключана)"
-    },
-    "PowerLimit": {
-      "text2": ["Межы", "магутнасці"],
-      "desc": "Максімальная магутнасць, якую можа выкарыстоўваць паяльнік (Ватт)"
-    },
-    "ReverseButtonTempChange": {
-      "text2": ["Інвертаваць", "кнопкі"],
-      "desc": "Інвертаваць кнопкі вымярэння тэмпературы"
-    },
-    "TempChangeShortStep": {
-      "text2": ["Крок тэмп.", "кар. нац."],
-      "desc": "Крок вымярэння тэмпературы пры кароткім націску кнопак"
-    },
-    "TempChangeLongStep": {
-      "text2": ["Крок тэмп.", "пад. нац."],
-      "desc": "Крок вымярэння тэмпературы пры падоўжаным націску кнопак"
-    },
-    "PowerPulsePower": {
-      "text2": ["Сіла імп.", "сілкав. Вт"],
-      "desc": "Сіла імпульса щтрымливаючага ад сну павербанку ці іншай крыніцы сілкавання"
-    },
-    "HallEffSensitivity": {
-      "text2": ["Эфект Хола", "адчувальнасць"],
-      "desc": "Узровень адчувальнасці датчыка хола ў рэжыме сну (0=Выкл. | 1=Мін. | ... | 9=Макс.)"
-    },
-    "LockingMode": {
-      "text2": ["Дазволіць", "блок. кнопак"],
-      "desc": "Пры рабоце падоўжаны націск дзьвух кнопак блакуе іх (А=Адключана | Т=Толькі турба | П=Поўная блакіроўка)"
-    },
-    "MinVolCell": {
-      "text2": ["Мін.", "напр."],
-      "desc": "Мінімальная дазволеная напруга на ячэйку (3S: 3 - 3,7V | 4S: 2,4 - 3,7V)"
-    },
-    "AnimLoop": {
-      "text2": ["Зацыкленая", "анімацыя"],
-      "desc": "Зацыкленая анімацыя гузікаў у галоўным меню"
-    },
-    "AnimSpeed": {
-      "text2": ["Хуткасць", "анімацыі"],
-      "desc": "Хуткасць анімацыі гузікаў у галоўным меню (Мілісекунды) (А=Адключана | Н=Нізкі | С=Сярэдні | В=Высокі)"
-    },
-    "PowerPulseWait": {
-      "text2": ["Імпульс магутнасці", "час чакання"],
-      "desc": "Час чакання перад запускам кожнага імпульсу няспання (x 2.5 с)"
-    },
-    "PowerPulseDuration": {
-      "text2": ["Імпульс магутнасці", "працягласць"],
-      "desc": "Працягласць імпульсу няспання (x 250 мс)"
-    },
-    "LanguageSwitch": {
-      "text2": ["Мова:", " BY     Беларуская"],
-      "desc": ""
-    },
-    "Brightness": {
-      "text2": ["Экран", "Яркасць"],
-      "desc": "Адрэгулюйце кантраснасць / яркасць OLED-экрана"
-    },
-    "ColourInversion": {
-      "text2": ["Экран", "Інвертаваць"],
-      "desc": "Інвертаваць колеры OLED-экрана"
-    },
-    "LOGOTime": {
-      "text2": ["Boot logo", "duration"],
-      "desc": "Sets the duration for the boot logo (s=seconds)"
-    }
-  }
-}
+{
+    "languageCode": "BE",
+    "languageLocalName": "Беларуская",
+    "tempUnitFahrenheit": false,
+    "messages": {
+        "SettingsCalibrationWarning": "Пераканайцеся, што пры наступнай загрузцы наканечнік і ручка маюць пакаёвую тэмпературу!",
+        "CJCCalibrating": "каліброўка",
+        "SettingsResetWarning": "Вы ўпэннены, што жадаеце зкінуць налады да першапачатковых значэнняў?",
+        "UVLOWarningString": "НАПРУГА--",
+        "UndervoltageString": "Нізкая напруга",
+        "InputVoltageString": "Сілкаванне В: ",
+        "SleepingSimpleString": "Zzzz",
+        "SleepingAdvancedString": "Чаканне...",
+        "SleepingTipAdvancedString": "Джала:",
+        "OffString": "Выкл.",
+        "DeviceFailedValidationWarning": "Ваша прылада, хутчэй за ўсё, падробка!"
+    },
+    "messagesWarn": {
+        "CJCCalibrationDone": [
+            "Calibration",
+            "done!"
+        ],
+        "ResetOKMessage": "Скід OK",
+        "SettingsResetMessage": [
+            "Налады",
+            "зкінуты!"
+        ],
+        "NoAccelerometerMessage": [
+            "Ня вызначаны",
+            "акселерометр!"
+        ],
+        "NoPowerDeliveryMessage": [
+            "Няма USB-PD IC",
+            "выяўлены!"
+        ],
+        "LockingKeysString": "ЗАМКНУТЫ",
+        "UnlockingKeysString": "АДЫМКНУТЫ",
+        "WarningKeysLockedString": "!ЗАМКНУТЫ!",
+        "WarningThermalRunaway": [
+            "Цеплавы",
+            "Уцякач"
+        ]
+    },
+    "characters": {
+        "SettingRightChar": "П",
+        "SettingLeftChar": "Л",
+        "SettingAutoChar": "А",
+        "SettingOffChar": "O",
+        "SettingSlowChar": "М",
+        "SettingMediumChar": "С",
+        "SettingFastChar": "Х",
+        "SettingStartNoneChar": "В",
+        "SettingStartSolderingChar": "П",
+        "SettingStartSleepChar": "Ч",
+        "SettingStartSleepOffChar": "К",
+        "SettingSensitivityOff": "А",
+        "SettingSensitivityLow": "Н",
+        "SettingSensitivityMedium": "С",
+        "SettingSensitivityHigh": "В",
+        "SettingLockDisableChar": "А",
+        "SettingLockBoostChar": "Т",
+        "SettingLockFullChar": "П"
+    },
+    "menuGroups": {
+        "PowerMenu": {
+            "text2": [
+                "Налады",
+                "сілкавання"
+            ],
+            "desc": ""
+        },
+        "SolderingMenu": {
+            "text2": [
+                "Налады",
+                "пайкі"
+            ],
+            "desc": ""
+        },
+        "PowerSavingMenu": {
+            "text2": [
+                "Рэжымы",
+                "сну"
+            ],
+            "desc": ""
+        },
+        "UIMenu": {
+            "text2": [
+                "Налады",
+                "інтэрфейсу"
+            ],
+            "desc": ""
+        },
+        "AdvancedMenu": {
+            "text2": [
+                "Дадатковыя",
+                "налады"
+            ],
+            "desc": ""
+        }
+    },
+    "menuOptions": {
+        "DCInCutoff": {
+            "text2": [
+                "Крыніца",
+                "сілкавання"
+            ],
+            "desc": "Крыніца сілкавання. Усталюе напругу адсечкі. (DC 10В) (S 3,3В на ячэйку, без абмежавання магутнасці)"
+        },
+        "MinVolCell": {
+            "text2": [
+                "Мін.",
+                "напр."
+            ],
+            "desc": "Мінімальная дазволеная напруга на ячэйку (3S: 3 - 3,7V | 4S: 2,4 - 3,7V)"
+        },
+        "QCMaxVoltage": {
+            "text2": [
+                "Магутнасць",
+                "сілкавання"
+            ],
+            "desc": "Магутнасць выкарыстоўваемай крыніцы сілкавання"
+        },
+        "PDNegTimeout": {
+            "text2": [
+                "PD",
+                "прыпынак"
+            ],
+            "desc": "Час чакання ўзгаднення PD з крокам 100 мс для сумяшчальнасці з некаторымі зараднымі зараднымі прыладамі QC (0: адключана)"
+        },
+        "BoostTemperature": {
+            "text2": [
+                "t° турба",
+                "рэжыму"
+            ],
+            "desc": "Тэмпература джала ў турба-рэжыме"
+        },
+        "AutoStart": {
+            "text2": [
+                "Аўта",
+                "старт"
+            ],
+            "desc": "Рэжым, у якім запускаецца паяльнік пры падачы сілкавання (В=Выкл. | П=Пайка | Ч=Чаканне | К=Чаканне пры комн. тэмп.)"
+        },
+        "TempChangeShortStep": {
+            "text2": [
+                "Крок тэмп.",
+                "кар. нац."
+            ],
+            "desc": "Крок вымярэння тэмпературы пры кароткім націску кнопак"
+        },
+        "TempChangeLongStep": {
+            "text2": [
+                "Крок тэмп.",
+                "пад. нац."
+            ],
+            "desc": "Крок вымярэння тэмпературы пры падоўжаным націску кнопак"
+        },
+        "LockingMode": {
+            "text2": [
+                "Дазволіць",
+                "блок. кнопак"
+            ],
+            "desc": "Пры рабоце падоўжаны націск дзьвух кнопак блакуе іх (А=Адключана | Т=Толькі турба | П=Поўная блакіроўка)"
+        },
+        "MotionSensitivity": {
+            "text2": [
+                "Адчувальнасць",
+                "акселерометра"
+            ],
+            "desc": "Адчувальнасць акселерометра (0=Выкл. | 1=Мін. | ... | 9=Макс.)"
+        },
+        "SleepTemperature": {
+            "text2": [
+                "Тэмп.",
+                "чакання"
+            ],
+            "desc": "Тэмпература рэжыму чакання"
+        },
+        "SleepTimeout": {
+            "text2": [
+                "Таймаўт",
+                "чакання"
+            ],
+            "desc": "Час да пераходу ў рэжым чакання (Хвіліны | Секунды)"
+        },
+        "ShutdownTimeout": {
+            "text2": [
+                "Таймаут",
+                "выключэння"
+            ],
+            "desc": "Час да адключэння паяльніка (Хвіліны)"
+        },
+        "HallEffSensitivity": {
+            "text2": [
+                "Эфект Хола",
+                "адчувальнасць"
+            ],
+            "desc": "Узровень адчувальнасці датчыка хола ў рэжыме сну (0=Выкл. | 1=Мін. | ... | 9=Макс.)"
+        },
+        "TemperatureUnit": {
+            "text2": [
+                "Адзінкі",
+                "тэмпературы"
+            ],
+            "desc": "Адзінкі вымярэння тэмпературы (C=Цэльcія | F=Фарэнгейта)"
+        },
+        "DisplayRotation": {
+            "text2": [
+                "Арыентацыя",
+                "экрану"
+            ],
+            "desc": "Арыентацыя экрану (П=Правая рука | Л=Левая рука | А=Аўта)"
+        },
+        "CooldownBlink": {
+            "text2": [
+                "Мігценне t°",
+                "пры астуджэнні"
+            ],
+            "desc": "Міргаць тэмпературай на экране астуджэння, пакуль джала яшчэ гарачае"
+        },
+        "ScrollingSpeed": {
+            "text2": [
+                "Хуткацсь",
+                "тексту"
+            ],
+            "desc": "Хуткасць гартання тэксту (М=марудна | Х=хутка)"
+        },
+        "ReverseButtonTempChange": {
+            "text2": [
+                "Інвертаваць",
+                "кнопкі"
+            ],
+            "desc": "Інвертаваць кнопкі вымярэння тэмпературы"
+        },
+        "AnimSpeed": {
+            "text2": [
+                "Хуткасць",
+                "анімацыі"
+            ],
+            "desc": "Хуткасць анімацыі гузікаў у галоўным меню (Мілісекунды) (А=Адключана | Н=Нізкая | С=Сярэдняя | В=Высокая)"
+        },
+        "AnimLoop": {
+            "text2": [
+                "Зацыкленая",
+                "анімацыя"
+            ],
+            "desc": "Зацыкленая анімацыя гузікаў у галоўным меню"
+        },
+        "Brightness": {
+            "text2": [
+                "Экран",
+                "Яркасць"
+            ],
+            "desc": "Адрэгулюйце кантраснасць / яркасць OLED-экрана"
+        },
+        "ColourInversion": {
+            "text2": [
+                "Экран",
+                "Інвертаваць"
+            ],
+            "desc": "Інвертаваць колеры OLED-экрана"
+        },
+        "LOGOTime": {
+            "text2": [
+                "Лагатып загрузкі",
+                "працягласць"
+            ],
+            "desc": "Усталяваць працягласць лагатыпа загрузкі (s=Секунды)"
+        },
+        "AdvancedIdle": {
+            "text2": [
+                "Падрабязны",
+                "рэжым чакання"
+            ],
+            "desc": "Адлюстроўваць дэталёвую инфармацыю паменьшаным шрыфтом на экране чакання"
+        },
+        "AdvancedSoldering": {
+            "text2": [
+                "Падрабязны",
+                "экран пайкі"
+            ],
+            "desc": "Паказваць дэталёвую інформацыю на экране пайкі"
+        },
+        "PowerLimit": {
+            "text2": [
+                "Межы",
+                "магутнасці"
+            ],
+            "desc": "Максімальная магутнасць, якую можа выкарыстоўваць паяльнік (Ватт)"
+        },
+        "CalibrateCJC": {
+            "text2": [
+                "Каліброўка тэмпературы",
+                "пры наступнай загрузцы"
+            ],
+            "desc": "At next boot tip Cold Junction Compensation will be calibrated (not required if Delta T is < 5°C)"
+        },
+        "VoltageCalibration": {
+            "text2": [
+                "Каліброўка",
+                "напругі"
+            ],
+            "desc": "Каліброўка ўваходнай напругі (падоўжаны націск для выхаду)"
+        },
+        "PowerPulsePower": {
+            "text2": [
+                "Сіла імп.",
+                "сілкав. Вт"
+            ],
+            "desc": "Моц імпульса ўтрымливаючага ад сну павербанку ці іншай крыніцы сілкавання"
+        },
+        "PowerPulseWait": {
+            "text2": [
+                "Імпульс магутнасці",
+                "час чакання"
+            ],
+            "desc": "Час чакання перад запускам кожнага імпульсу няспання (x 2.5 с)"
+        },
+        "PowerPulseDuration": {
+            "text2": [
+                "Імпульс магутнасці",
+                "працягласць"
+            ],
+            "desc": "Працягласць імпульсу няспання (x 250 мс)"
+        },
+        "SettingsReset": {
+            "text2": [
+                "Скід",
+                "наладаў"
+            ],
+            "desc": "Скід наладаў да першапачатковых значэнняў"
+        },
+        "LanguageSwitch": {
+            "text2": [
+                "Мова:",
+                " BY  Беларуская"
+            ],
+            "desc": ""
+        }
+    }
+}

Translations/translation_BG.json

@@ -1,207 +1,341 @@
-{
-  "languageCode": "BG",
-  "languageLocalName": "Български",
-  "fonts": ["ascii_basic", "cyrillic"],
-  "tempUnitFahrenheit": false,
-  "messages": {
-    "SettingsCalibrationWarning": "Уверете се, че върха на поялника е със стайна температура преди да продължите!",
-    "SettingsResetWarning": "Сигурни ли сте, че искате да върнете фабричните настройки?",
-    "UVLOWarningString": "Ниско DC Напрежение",
-    "UndervoltageString": "Ниско Напрежение",
-    "InputVoltageString": "Входно V: ",
-    "SleepingSimpleString": "Сън",
-    "SleepingAdvancedString": "Хър Хър Хър...",
-    "SleepingTipAdvancedString": "Връх:",
-    "OffString": "Изкл."
-  },
-  "messagesWarn": {
-    "ResetOKMessage": "Нулиране",
-    "SettingsResetMessage": ["Настройките бяха", "нулирани!"],
-    "NoAccelerometerMessage": ["No accelerometer", "detected!"],
-    "NoPowerDeliveryMessage": ["No USB-PD IC", "detected!"],
-    "LockingKeysString": "LOCKED",
-    "UnlockingKeysString": "UNLOCKED",
-    "WarningKeysLockedString": "!LOCKED!",
-    "WarningThermalRunaway": ["Thermal", "Runaway"]
-  },
-  "characters": {
-    "SettingRightChar": "R",
-    "SettingLeftChar": "L",
-    "SettingAutoChar": "A",
-    "SettingOffChar": "O",
-    "SettingSlowChar": "S",
-    "SettingMediumChar": "M",
-    "SettingFastChar": "F",
-    "SettingStartNoneChar": "И",
-    "SettingStartSolderingChar": "Р",
-    "SettingStartSleepChar": "С",
-    "SettingStartSleepOffChar": "П",
-    "SettingSensitivityOff": "O",
-    "SettingSensitivityLow": "L",
-    "SettingSensitivityMedium": "M",
-    "SettingSensitivityHigh": "H",
-    "SettingLockDisableChar": "D",
-    "SettingLockBoostChar": "B",
-    "SettingLockFullChar": "F"
-  },
-  "menuGroups": {
-    "PowerMenu": {
-      "text2": ["Power", "settings"],
-      "desc": "Power settings"
-    },
-    "SolderingMenu": {
-      "text2": ["Поялник", "Настройки"],
-      "desc": "Настройки на поялника"
-    },
-    "PowerSavingMenu": {
-      "text2": ["Режими", "Настройки"],
-      "desc": "Настройки енергоспестяване"
-    },
-    "UIMenu": {
-      "text2": ["Интерфейс", "Настройки"],
-      "desc": "Настройки на интерфейса"
-    },
-    "AdvancedMenu": {
-      "text2": ["Разширени", "Настройки"],
-      "desc": "Допълнителни настройки"
-    }
-  },
-  "menuOptions": {
-    "DCInCutoff": {
-      "text2": ["Източник", "захранване"],
-      "desc": "Източник на захранване. Минимално напрежение. (DC 10V) (S 3,3V за клетка)"
-    },
-    "SleepTemperature": {
-      "text2": ["Темп.", "сън"],
-      "desc": "Температура при режим \"сън\" (C)"
-    },
-    "SleepTimeout": {
-      "text2": ["Време", "сън"],
-      "desc": "Включване в режим \"сън\" след: (Минути | Секунди)"
-    },
-    "ShutdownTimeout": {
-      "text2": ["Време", "изкл."],
-      "desc": "Изключване след (Минути)"
-    },
-    "MotionSensitivity": {
-      "text2": ["Усещане", "за движение"],
-      "desc": "Усещане за движение (0=Изключено | 1=Слабо | ... | 9=Силно)"
-    },
-    "TemperatureUnit": {
-      "text2": ["Единици за", "температура"],
-      "desc": "Единици за температура (C=Целзии | F=Фаренхайт)"
-    },
-    "AdvancedIdle": {
-      "text2": ["Детайлен", "екран в покой"],
-      "desc": "Покажи детайлна информация със ситен шрифт на екрана в режим на покой."
-    },
-    "DisplayRotation": {
-      "text2": ["Ориентация", "на дисплея"],
-      "desc": "Ориентация на дисплея (R=Дясна Ръка | L=Лява Ръка | A=Автоматично)"
-    },
-    "BoostTemperature": {
-      "text2": ["Турбо", "темп."],
-      "desc": "Температура за \"турбо\" режим"
-    },
-    "AutoStart": {
-      "text2": ["Автоматичен", "работен режим"],
-      "desc": "Режим на поялника при включване на захранването. (И=Изключен | Р=Работен | С=Сън | П=Сън температура помещение)"
-    },
-    "CooldownBlink": {
-      "text2": ["Мигай при", "топъл поялник"],
-      "desc": "След изключване от работен режим, индикатора за температура да мига докато човката на поялника все още е топла"
-    },
-    "TemperatureCalibration": {
-      "text2": ["Калибриране", "температура?"],
-      "desc": "Калибриране на температурата"
-    },
-    "SettingsReset": {
-      "text2": ["Фабрични", "настройки?"],
-      "desc": "Връщане на фабрични настройки"
-    },
-    "VoltageCalibration": {
-      "text2": ["Калибриране", "напрежение?"],
-      "desc": "Калибриране на входното напрежение. Задръжте бутонa за изход"
-    },
-    "AdvancedSoldering": {
-      "text2": ["Детайлен", "работен екран"],
-      "desc": "Детайлна информация в работен режим при запояване"
-    },
-    "ScrollingSpeed": {
-      "text2": ["Скорост", "на текста"],
-      "desc": "Скорост на движение на този текст"
-    },
-    "QCMaxVoltage": {
-      "text2": ["Мощност на", "захранване"],
-      "desc": "Мощност на избраното захранване"
-    },
-    "PDNegTimeout": {
-      "text2": ["PD", "timeout"],
-      "desc": "PD negotiation timeout in 100ms steps for compatibility with some QC chargers"
-    },
-    "PowerLimit": {
-      "text2": ["Лимит на", "мощност"],
-      "desc": "Максимална мощност на поялника (Watt)"
-    },
-    "ReverseButtonTempChange": {
-      "text2": ["Размяна", "бутони +-?"],
-      "desc": "Обръщане на бутоните \"+\" и \"-\" за промяна на температурата на върха на поялника"
-    },
-    "TempChangeShortStep": {
-      "text2": ["Промяна T", "бързо?"],
-      "desc": "Промяна на температура при бързо натискане на бутон!"
-    },
-    "TempChangeLongStep": {
-      "text2": ["Промяна Т", "задържане?"],
-      "desc": "Промяна на температура при задържане на бутон!"
-    },
-    "PowerPulsePower": {
-      "text2": ["Захранващ", "импулс"],
-      "desc": "Поддържане на интензивност на захранващия импулс"
-    },
-    "HallEffSensitivity": {
-      "text2": ["Hall sensor", "sensitivity"],
-      "desc": "Sensitivity of the Hall effect sensor to detect sleep (0=Изключено | 1=Слабо | ... | 9=Силно)"
-    },
-    "LockingMode": {
-      "text2": ["Allow locking", "buttons"],
-      "desc": "While soldering, hold down both buttons to toggle locking them (D=disable | B=boost mode only | F=full locking)"
-    },
-    "MinVolCell": {
-      "text2": ["Minimum", "voltage"],
-      "desc": "Minimum allowed voltage per cell (3S: 3 - 3,7V | 4-6S: 2,4 - 3,7V)"
-    },
-    "AnimLoop": {
-      "text2": ["Anim.", "loop"],
-      "desc": "Loop icon animations in main menu"
-    },
-    "AnimSpeed": {
-      "text2": ["Anim.", "speed"],
-      "desc": "Pace of icon animations in menu (O=off | S=slow | M=medium | F=fast)"
-    },
-    "PowerPulseWait": {
-      "text2": ["Power pulse", "delay"],
-      "desc": "Delay before keep-awake-pulse is triggered (x 2,5с)"
-    },
-    "PowerPulseDuration": {
-      "text2": ["Power pulse", "duration"],
-      "desc": "Keep-awake-pulse duration (x 250мс)"
-    },
-    "LanguageSwitch": {
-      "text2": ["Език:", " BG   Български"],
-      "desc": ""
-    },
-    "Brightness": {
-      "text2": ["Screen", "brightness"],
-      "desc": "Adjust the brightness of the OLED screen"
-    },
-    "ColourInversion": {
-      "text2": ["Invert", "screen"],
-      "desc": "Invert the colours of the OLED screen"
-    },
-    "LOGOTime": {
-      "text2": ["Boot logo", "duration"],
-      "desc": "Sets the duration for the boot logo (s=seconds)"
-    }
-  }
-}
+{
+    "languageCode": "BG",
+    "languageLocalName": "Български",
+    "tempUnitFahrenheit": false,
+    "messages": {
+        "SettingsCalibrationWarning": "Before rebooting, make sure tip & handle are at room temperature!",
+        "CJCCalibrating": "calibrating",
+        "SettingsResetWarning": "Сигурни ли сте, че искате да върнете фабричните настройки?",
+        "UVLOWarningString": "Ниско DC Напрежение",
+        "UndervoltageString": "Ниско Напрежение",
+        "InputVoltageString": "Входно V: ",
+        "SleepingSimpleString": "Сън",
+        "SleepingAdvancedString": "Хър Хър Хър...",
+        "SleepingTipAdvancedString": "Връх:",
+        "OffString": "Изкл.",
+        "DeviceFailedValidationWarning": "Your device is most likely a counterfeit!"
+    },
+    "messagesWarn": {
+        "CJCCalibrationDone": [
+            "Calibration",
+            "done!"
+        ],
+        "ResetOKMessage": "Нулиране",
+        "SettingsResetMessage": [
+            "Настройките бяха",
+            "нулирани!"
+        ],
+        "NoAccelerometerMessage": [
+            "No accelerometer",
+            "detected!"
+        ],
+        "NoPowerDeliveryMessage": [
+            "No USB-PD IC",
+            "detected!"
+        ],
+        "LockingKeysString": "LOCKED",
+        "UnlockingKeysString": "UNLOCKED",
+        "WarningKeysLockedString": "!LOCKED!",
+        "WarningThermalRunaway": [
+            "Thermal",
+            "Runaway"
+        ]
+    },
+    "characters": {
+        "SettingRightChar": "R",
+        "SettingLeftChar": "L",
+        "SettingAutoChar": "A",
+        "SettingOffChar": "O",
+        "SettingSlowChar": "S",
+        "SettingMediumChar": "M",
+        "SettingFastChar": "F",
+        "SettingStartNoneChar": "И",
+        "SettingStartSolderingChar": "Р",
+        "SettingStartSleepChar": "С",
+        "SettingStartSleepOffChar": "П",
+        "SettingSensitivityOff": "O",
+        "SettingSensitivityLow": "L",
+        "SettingSensitivityMedium": "M",
+        "SettingSensitivityHigh": "H",
+        "SettingLockDisableChar": "D",
+        "SettingLockBoostChar": "B",
+        "SettingLockFullChar": "F"
+    },
+    "menuGroups": {
+        "PowerMenu": {
+            "text2": [
+                "Power",
+                "settings"
+            ],
+            "desc": ""
+        },
+        "SolderingMenu": {
+            "text2": [
+                "Поялник",
+                "Настройки"
+            ],
+            "desc": ""
+        },
+        "PowerSavingMenu": {
+            "text2": [
+                "Режими",
+                "Настройки"
+            ],
+            "desc": ""
+        },
+        "UIMenu": {
+            "text2": [
+                "Интерфейс",
+                "Настройки"
+            ],
+            "desc": ""
+        },
+        "AdvancedMenu": {
+            "text2": [
+                "Разширени",
+                "Настройки"
+            ],
+            "desc": ""
+        }
+    },
+    "menuOptions": {
+        "DCInCutoff": {
+            "text2": [
+                "Източник",
+                "захранване"
+            ],
+            "desc": "Източник на захранване. Минимално напрежение. (DC 10V) (S 3,3V за клетка)"
+        },
+        "MinVolCell": {
+            "text2": [
+                "Minimum",
+                "voltage"
+            ],
+            "desc": "Minimum allowed voltage per battery cell (3S: 3 - 3,7V | 4-6S: 2,4 - 3,7V)"
+        },
+        "QCMaxVoltage": {
+            "text2": [
+                "Мощност на",
+                "захранване"
+            ],
+            "desc": "Мощност на избраното захранване"
+        },
+        "PDNegTimeout": {
+            "text2": [
+                "PD",
+                "timeout"
+            ],
+            "desc": "PD negotiation timeout in 100ms steps for compatibility with some QC chargers"
+        },
+        "BoostTemperature": {
+            "text2": [
+                "Турбо",
+                "темп."
+            ],
+            "desc": "Температура за \"турбо\" режим"
+        },
+        "AutoStart": {
+            "text2": [
+                "Автоматичен",
+                "работен режим"
+            ],
+            "desc": "Режим на поялника при включване на захранването. (И=Изключен | Р=Работен | С=Сън | П=Сън температура помещение)"
+        },
+        "TempChangeShortStep": {
+            "text2": [
+                "Промяна T",
+                "бързо?"
+            ],
+            "desc": "Промяна на температура при бързо натискане на бутон!"
+        },
+        "TempChangeLongStep": {
+            "text2": [
+                "Промяна Т",
+                "задържане?"
+            ],
+            "desc": "Промяна на температура при задържане на бутон!"
+        },
+        "LockingMode": {
+            "text2": [
+                "Allow locking",
+                "buttons"
+            ],
+            "desc": "While soldering, hold down both buttons to toggle locking them (D=disable | B=boost mode only | F=full locking)"
+        },
+        "MotionSensitivity": {
+            "text2": [
+                "Усещане",
+                "за движение"
+            ],
+            "desc": "Усещане за движение (0=Изключено | 1=Слабо | ... | 9=Силно)"
+        },
+        "SleepTemperature": {
+            "text2": [
+                "Темп.",
+                "сън"
+            ],
+            "desc": "Температура при режим \"сън\" (C)"
+        },
+        "SleepTimeout": {
+            "text2": [
+                "Време",
+                "сън"
+            ],
+            "desc": "Включване в режим \"сън\" след: (Минути | Секунди)"
+        },
+        "ShutdownTimeout": {
+            "text2": [
+                "Време",
+                "изкл."
+            ],
+            "desc": "Изключване след (Минути)"
+        },
+        "HallEffSensitivity": {
+            "text2": [
+                "Hall sensor",
+                "sensitivity"
+            ],
+            "desc": "Sensitivity to magnets (0=Изключено | 1=Слабо | ... | 9=Силно)"
+        },
+        "TemperatureUnit": {
+            "text2": [
+                "Единици за",
+                "температура"
+            ],
+            "desc": "Единици за температура (C=Целзии | F=Фаренхайт)"
+        },
+        "DisplayRotation": {
+            "text2": [
+                "Ориентация",
+                "на дисплея"
+            ],
+            "desc": "Ориентация на дисплея (R=Дясна Ръка | L=Лява Ръка | A=Автоматично)"
+        },
+        "CooldownBlink": {
+            "text2": [
+                "Мигай при",
+                "топъл поялник"
+            ],
+            "desc": "След изключване от работен режим, индикатора за температура да мига докато човката на поялника все още е топла"
+        },
+        "ScrollingSpeed": {
+            "text2": [
+                "Скорост",
+                "на текста"
+            ],
+            "desc": "Скорост на движение на този текст"
+        },
+        "ReverseButtonTempChange": {
+            "text2": [
+                "Размяна",
+                "бутони +-?"
+            ],
+            "desc": "Обръщане на бутоните \"+\" и \"-\" за промяна на температурата на върха на поялника"
+        },
+        "AnimSpeed": {
+            "text2": [
+                "Anim.",
+                "speed"
+            ],
+            "desc": "Pace of icon animations in menu (O=off | S=slow | M=medium | F=fast)"
+        },
+        "AnimLoop": {
+            "text2": [
+                "Anim.",
+                "loop"
+            ],
+            "desc": "Loop icon animations in main menu"
+        },
+        "Brightness": {
+            "text2": [
+                "Screen",
+                "brightness"
+            ],
+            "desc": "Adjust the OLED screen brightness"
+        },
+        "ColourInversion": {
+            "text2": [
+                "Invert",
+                "screen"
+            ],
+            "desc": "Invert the OLED screen colors"
+        },
+        "LOGOTime": {
+            "text2": [
+                "Boot logo",
+                "duration"
+            ],
+            "desc": "Set boot logo duration (s=seconds)"
+        },
+        "AdvancedIdle": {
+            "text2": [
+                "Детайлен",
+                "екран в покой"
+            ],
+            "desc": "Покажи детайлна информация със ситен шрифт на екрана в режим на покой."
+        },
+        "AdvancedSoldering": {
+            "text2": [
+                "Детайлен",
+                "работен екран"
+            ],
+            "desc": "Детайлна информация в работен режим при запояване"
+        },
+        "PowerLimit": {
+            "text2": [
+                "Лимит на",
+                "мощност"
+            ],
+            "desc": "Максимална мощност на поялника (Watt)"
+        },
+        "CalibrateCJC": {
+            "text2": [
+                "Calibrate CJC",
+                "at next boot"
+            ],
+            "desc": "At next boot tip Cold Junction Compensation will be calibrated (not required if Delta T is < 5 C)"
+        },
+        "VoltageCalibration": {
+            "text2": [
+                "Калибриране",
+                "напрежение?"
+            ],
+            "desc": "Калибриране на входното напрежение. Задръжте бутонa за изход"
+        },
+        "PowerPulsePower": {
+            "text2": [
+                "Захранващ",
+                "импулс"
+            ],
+            "desc": "Поддържане на интензивност на захранващия импулс"
+        },
+        "PowerPulseWait": {
+            "text2": [
+                "Power pulse",
+                "delay"
+            ],
+            "desc": "Delay before keep-awake-pulse is triggered (x 2,5с)"
+        },
+        "PowerPulseDuration": {
+            "text2": [
+                "Power pulse",
+                "duration"
+            ],
+            "desc": "Keep-awake-pulse duration (x 250мс)"
+        },
+        "SettingsReset": {
+            "text2": [
+                "Фабрични",
+                "настройки?"
+            ],
+            "desc": "Връщане на фабрични настройки"
+        },
+        "LanguageSwitch": {
+            "text2": [
+                "Език:",
+                " BG   Български"
+            ],
+            "desc": ""
+        }
+    }
+}

Translations/translation_CS.json

@@ -1,207 +1,341 @@
-{
-  "languageCode": "CS",
-  "languageLocalName": "Český",
-  "fonts": ["ascii_basic", "latin_extended"],
-  "tempUnitFahrenheit": false,
-  "messages": {
-    "SettingsCalibrationWarning": "Ujistěte se, že hrot má pokojovou teplotu!",
-    "SettingsResetWarning": "Opravdu chcete resetovat zařízení do továrního nastavení?",
-    "UVLOWarningString": "Nízké DC",
-    "UndervoltageString": "! Nízké napětí !",
-    "InputVoltageString": "Napětí: ",
-    "SleepingSimpleString": "Zzz ",
-    "SleepingAdvancedString": "Režim spánku...",
-    "SleepingTipAdvancedString": "Hrot:",
-    "OffString": "Vyp"
-  },
-  "messagesWarn": {
-    "ResetOKMessage": "Reset OK",
-    "SettingsResetMessage": ["Tov. nas. obnov.", ""],
-    "NoAccelerometerMessage": ["No accelerometer", "detected!"],
-    "NoPowerDeliveryMessage": ["No USB-PD IC", "detected!"],
-    "LockingKeysString": "LOCKED",
-    "UnlockingKeysString": "UNLOCKED",
-    "WarningKeysLockedString": "!LOCKED!",
-    "WarningThermalRunaway": ["Thermal", "Runaway"]
-  },
-  "characters": {
-    "SettingRightChar": "P",
-    "SettingLeftChar": "L",
-    "SettingAutoChar": "A",
-    "SettingOffChar": "O",
-    "SettingSlowChar": "P",
-    "SettingMediumChar": "M",
-    "SettingFastChar": "R",
-    "SettingStartNoneChar": "O",
-    "SettingStartSolderingChar": "P",
-    "SettingStartSleepChar": "S",
-    "SettingStartSleepOffChar": "M",
-    "SettingSensitivityOff": "O",
-    "SettingSensitivityLow": "L",
-    "SettingSensitivityMedium": "M",
-    "SettingSensitivityHigh": "H",
-    "SettingLockDisableChar": "D",
-    "SettingLockBoostChar": "B",
-    "SettingLockFullChar": "F"
-  },
-  "menuGroups": {
-    "PowerMenu": {
-      "text2": ["Power", "settings"],
-      "desc": "Power settings"
-    },
-    "SolderingMenu": {
-      "text2": ["Pájecí", "nastavení"],
-      "desc": "Nastavení pájení (boost, auto start...)."
-    },
-    "PowerSavingMenu": {
-      "text2": ["Režim", "spánku"],
-      "desc": "Nastavení režimu spánku, automatického vypnutí..."
-    },
-    "UIMenu": {
-      "text2": ["Uživatelské", "rozhraní"],
-      "desc": "Nastavení uživatelského rozhraní."
-    },
-    "AdvancedMenu": {
-      "text2": ["Pokročilé", "volby"],
-      "desc": "Pokročilé volby (detailní obrazovky, kalibrace, tovární nastavení...)."
-    }
-  },
-  "menuOptions": {
-    "DCInCutoff": {
-      "text2": ["Zdroj", "napájení"],
-      "desc": "Při nižším napětí ukončí pájení (DC=10V | ?S=?x3,3V pro LiPo, LiIon...)."
-    },
-    "SleepTemperature": {
-      "text2": ["Teplota v", "r. spánku"],
-      "desc": "Teplota v režimu spánku."
-    },
-    "SleepTimeout": {
-      "text2": ["Čas do", "r. spánku"],
-      "desc": "Čas do režimu spánku (Minut | Sekund)."
-    },
-    "ShutdownTimeout": {
-      "text2": ["Čas do", "vypnutí"],
-      "desc": "Čas do automatického vypnutí (Minut)."
-    },
-    "MotionSensitivity": {
-      "text2": ["Citlivost", "det. pohybu"],
-      "desc": "Citlivost detekce pohybu (0=Vyp | 1=Min | ... | 9=Max)."
-    },
-    "TemperatureUnit": {
-      "text2": ["Jednotky", "teploty"],
-      "desc": "Jednotky měření teploty (C=Celsius | F=Fahrenheit)."
-    },
-    "AdvancedIdle": {
-      "text2": ["Podrobnosti", "na vých. obr."],
-      "desc": "Zobrazit podrobnosti na výchozí obrazovce?"
-    },
-    "DisplayRotation": {
-      "text2": ["Orientace", "obrazovky"],
-      "desc": "Orientace obrazovky (P=Pravák | L=Levák | A=Auto)."
-    },
-    "BoostTemperature": {
-      "text2": ["Teplota v", "r. boost"],
-      "desc": "Teplota v režimu boost."
-    },
-    "AutoStart": {
-      "text2": ["Automatický", "start"],
-      "desc": "Při startu ihned nahřát hrot? (O=Pryč | P=Pájení | S=Spát | M=Spát teplota místnosti)"
-    },
-    "CooldownBlink": {
-      "text2": ["Blikáni při", "chladnutí"],
-      "desc": "Blikání teploty při chladnutí, dokud je hrot horký?"
-    },
-    "TemperatureCalibration": {
-      "text2": ["Kalibrovat", "teplotu?"],
-      "desc": "Kalibrace měření teploty."
-    },
-    "SettingsReset": {
-      "text2": ["Tovární", "nastavení?"],
-      "desc": "Obnovení továrního nastavení."
-    },
-    "VoltageCalibration": {
-      "text2": ["Kalibrovat", "vstupní napětí?"],
-      "desc": "Kalibrace vstupního napětí. Tlačítky uprav, podržením potvrď."
-    },
-    "AdvancedSoldering": {
-      "text2": ["Podrobnosti", "při pájení"],
-      "desc": "Zobrazit podrobnosti při pájení?"
-    },
-    "ScrollingSpeed": {
-      "text2": ["Rychlost", "popisků"],
-      "desc": "Rychlost posuvu popisků podobných tomuto (P=Pomalu | R=Rychle)"
-    },
-    "QCMaxVoltage": {
-      "text2": ["Výkon", "ve wattech"],
-      "desc": "Výkon použítého napájecího adaptéru ve wattech."
-    },
-    "PDNegTimeout": {
-      "text2": ["PD", "timeout"],
-      "desc": "PD negotiation timeout in 100ms steps for compatibility with some QC chargers (0: disabled)"
-    },
-    "PowerLimit": {
-      "text2": ["Omezení", "Výkonu"],
-      "desc": "Maximální příkon (Watty)"
-    },
-    "ReverseButtonTempChange": {
-      "text2": ["Prohodit", "tl. +-?"],
-      "desc": "Prohodí tlačítka plus a minus pro změnu teploty hrotu."
-    },
-    "TempChangeShortStep": {
-      "text2": ["Krok teploty", "krátký?"],
-      "desc": "Velikost skoku při změně teploty krátkým stiskem tlačítka!"
-    },
-    "TempChangeLongStep": {
-      "text2": ["Krok teploty", "dlouhý?"],
-      "desc": "Velikost skoku při změně teploty dlouhým stiskem tlačítka!"
-    },
-    "PowerPulsePower": {
-      "text2": ["Intenzita", "Výkon. pulsu"],
-      "desc": "Puls pro udržení zařízení v chodu (kvůli power bankám)."
-    },
-    "HallEffSensitivity": {
-      "text2": ["Hall sensor", "sensitivity"],
-      "desc": "Sensitivity of the Hall effect sensor to detect sleep (0=Vyp | 1=Min | ... | 9=Max)"
-    },
-    "LockingMode": {
-      "text2": ["Allow locking", "buttons"],
-      "desc": "While soldering, hold down both buttons to toggle locking them (D=disable | B=boost mode only | F=full locking)"
-    },
-    "MinVolCell": {
-      "text2": ["Minimum", "voltage"],
-      "desc": "Minimum allowed voltage per cell (3S: 3 - 3,7V | 4-6S: 2,4 - 3,7V)"
-    },
-    "AnimLoop": {
-      "text2": ["Anim.", "loop"],
-      "desc": "Loop icon animations in main menu"
-    },
-    "AnimSpeed": {
-      "text2": ["Anim.", "speed"],
-      "desc": "Pace of icon animations in menu (O=off | P=slow | M=medium | R=fast)"
-    },
-    "PowerPulseWait": {
-      "text2": ["Power pulse", "delay"],
-      "desc": "Delay before keep-awake-pulse is triggered (x 2,5s)"
-    },
-    "PowerPulseDuration": {
-      "text2": ["Power pulse", "duration"],
-      "desc": "Keep-awake-pulse duration (x 250ms)"
-    },
-    "LanguageSwitch": {
-      "text2": ["Řeč:", " CS       Český"],
-      "desc": ""
-    },
-    "Brightness": {
-      "text2": ["Screen", "brightness"],
-      "desc": "Adjust the brightness of the OLED screen"
-    },
-    "ColourInversion": {
-      "text2": ["Invert", "screen"],
-      "desc": "Invert the colours of the OLED screen"
-    },
-    "LOGOTime": {
-      "text2": ["Boot logo", "duration"],
-      "desc": "Sets the duration for the boot logo (s=seconds)"
-    }
-  }
-}
+{
+    "languageCode": "CS",
+    "languageLocalName": "Český",
+    "tempUnitFahrenheit": false,
+    "messages": {
+        "SettingsCalibrationWarning": "Before rebooting, make sure tip & handle are at room temperature!",
+        "CJCCalibrating": "calibrating",
+        "SettingsResetWarning": "Opravdu chcete resetovat zařízení do továrního nastavení?",
+        "UVLOWarningString": "Nízké DC",
+        "UndervoltageString": "Nízké napětí",
+        "InputVoltageString": "Napětí: ",
+        "SleepingSimpleString": "Zzz ",
+        "SleepingAdvancedString": "Režim spánku...",
+        "SleepingTipAdvancedString": "Hrot:",
+        "OffString": "Vyp",
+        "DeviceFailedValidationWarning": "Your device is most likely a counterfeit!"
+    },
+    "messagesWarn": {
+        "CJCCalibrationDone": [
+            "Calibration",
+            "done!"
+        ],
+        "ResetOKMessage": "Reset OK",
+        "SettingsResetMessage": [
+            "Nějaká nastavení",
+            "byla změněna!"
+        ],
+        "NoAccelerometerMessage": [
+            "Akcelerometr",
+            "nebyl detekován!"
+        ],
+        "NoPowerDeliveryMessage": [
+            "Žádný IO USB-PD",
+            "nebyl detekován!"
+        ],
+        "LockingKeysString": "ZAMČENO",
+        "UnlockingKeysString": "ODEMČENO",
+        "WarningKeysLockedString": "ZAMČENO!",
+        "WarningThermalRunaway": [
+            "Teplotní",
+            "Ochrana"
+        ]
+    },
+    "characters": {
+        "SettingRightChar": "P",
+        "SettingLeftChar": "L",
+        "SettingAutoChar": "A",
+        "SettingOffChar": "D",
+        "SettingSlowChar": "P",
+        "SettingMediumChar": "S",
+        "SettingFastChar": "R",
+        "SettingStartNoneChar": "V",
+        "SettingStartSolderingChar": "P",
+        "SettingStartSleepChar": "S",
+        "SettingStartSleepOffChar": "M",
+        "SettingSensitivityOff": "O",
+        "SettingSensitivityLow": "M",
+        "SettingSensitivityMedium": "S",
+        "SettingSensitivityHigh": "V",
+        "SettingLockDisableChar": "Z",
+        "SettingLockBoostChar": "B",
+        "SettingLockFullChar": "U"
+    },
+    "menuGroups": {
+        "PowerMenu": {
+            "text2": [
+                "Napájecí",
+                "nastavení"
+            ],
+            "desc": ""
+        },
+        "SolderingMenu": {
+            "text2": [
+                "Pájecí",
+                "nastavení"
+            ],
+            "desc": ""
+        },
+        "PowerSavingMenu": {
+            "text2": [
+                "Režim",
+                "spánku"
+            ],
+            "desc": ""
+        },
+        "UIMenu": {
+            "text2": [
+                "Uživatelské",
+                "rozhraní"
+            ],
+            "desc": ""
+        },
+        "AdvancedMenu": {
+            "text2": [
+                "Pokročilá",
+                "nastavení"
+            ],
+            "desc": ""
+        }
+    },
+    "menuOptions": {
+        "DCInCutoff": {
+            "text2": [
+                "Zdroj",
+                "napájení"
+            ],
+            "desc": "Při nižším napětí ukončit pájení (DC 10V)  (S 3,3V na článek, zakázat omezení napájení)."
+        },
+        "MinVolCell": {
+            "text2": [
+                "Minimální",
+                "napětí"
+            ],
+            "desc": "Minimální dovolené napětí po článku (3S: 3 - 3,7V | 4-6S: 2,4 - 3,7V)"
+        },
+        "QCMaxVoltage": {
+            "text2": [
+                "Napětí",
+                "QC"
+            ],
+            "desc": "Maximální napětí QC pro jednání páječkou"
+        },
+        "PDNegTimeout": {
+            "text2": [
+                "PD",
+                "timeout"
+            ],
+            "desc": "Maximální prodleva při jednání PD ve 100ms krocích pro kompatibilitu s některými QC nabíječkami"
+        },
+        "BoostTemperature": {
+            "text2": [
+                "Teplota",
+                "boostu"
+            ],
+            "desc": "Teplota hrotu v \"režimu boost\""
+        },
+        "AutoStart": {
+            "text2": [
+                "Chování",
+                "při startu"
+            ],
+            "desc": "V=vypnuto | P=pájecí teplota | S=spánková teplota | M=zahřát hrot po pohybu"
+        },
+        "TempChangeShortStep": {
+            "text2": [
+                "Krok teploty",
+                "krátký?"
+            ],
+            "desc": "Velikost přídavku při změně teploty krátkým stiskem tlačítka"
+        },
+        "TempChangeLongStep": {
+            "text2": [
+                "Krok teploty",
+                "dlouhý?"
+            ],
+            "desc": "Velikost přídavku při změně teploty dlouhým stiskem tlačítka"
+        },
+        "LockingMode": {
+            "text2": [
+                "Povolit zamč.",
+                "tlačítek"
+            ],
+            "desc": "Při pájení podržte obě tlačítka pro jejich zamčení (Z=zakázáno | B=pouze v režimu boost | U=úplné zamčení)"
+        },
+        "MotionSensitivity": {
+            "text2": [
+                "Citlivost",
+                "na pohyb"
+            ],
+            "desc": "0=vyp | 1=nejméně citlivé | ... | 9=nejvíce citlivé"
+        },
+        "SleepTemperature": {
+            "text2": [
+                "Teplota",
+                "ve spánku"
+            ],
+            "desc": "Teplota hrotu v režimu spánku."
+        },
+        "SleepTimeout": {
+            "text2": [
+                "Čas",
+                "do spánku"
+            ],
+            "desc": "\"Režim spánku\" naběhne v (s=sekundách | m=minutách)"
+        },
+        "ShutdownTimeout": {
+            "text2": [
+                "Čas do",
+                "vypnutí"
+            ],
+            "desc": "Interval automatického vypnutí (m=minut)"
+        },
+        "HallEffSensitivity": {
+            "text2": [
+                "Citlivost",
+                "Hall. čidla"
+            ],
+            "desc": "Citlivost Hallova čidla pro detekci spánku (0=vypnuto | 1=nejméně citlivé | ... | 9=nejvíce citlivé)"
+        },
+        "TemperatureUnit": {
+            "text2": [
+                "Jednotka",
+                "teploty"
+            ],
+            "desc": "C=Celsius | F=Fahrenheit"
+        },
+        "DisplayRotation": {
+            "text2": [
+                "Orientace",
+                "obrazovky"
+            ],
+            "desc": "P=pravák | L=levák | A=automaticky"
+        },
+        "CooldownBlink": {
+            "text2": [
+                "Blikáni při",
+                "chladnutí"
+            ],
+            "desc": "Blikat teplotou při chladnutí dokud je hrot horký"
+        },
+        "ScrollingSpeed": {
+            "text2": [
+                "Rychlost",
+                "posouvání"
+            ],
+            "desc": "Rychlost posouvání popisků podobných tomuto (P=pomalu | R=rychle)"
+        },
+        "ReverseButtonTempChange": {
+            "text2": [
+                "Prohodit",
+                "tl. +-?"
+            ],
+            "desc": "Prohodit tlačítka pro změnu teploty"
+        },
+        "AnimSpeed": {
+            "text2": [
+                "Anim.",
+                "rychlost"
+            ],
+            "desc": "Tempo animace ikon v menu (O=vypnuto | P=pomalu | S=středně | R=rychle)"
+        },
+        "AnimLoop": {
+            "text2": [
+                "Anim.",
+                "smyčka"
+            ],
+            "desc": "Animovat ikony hlavního menu ve smyčce"
+        },
+        "Brightness": {
+            "text2": [
+                "Jas",
+                "obrazovky"
+            ],
+            "desc": "Upravit jas OLED"
+        },
+        "ColourInversion": {
+            "text2": [
+                "Invertovat",
+                "obrazovku"
+            ],
+            "desc": "Invertovat barvy na OLED"
+        },
+        "LOGOTime": {
+            "text2": [
+                "Trvání",
+                "boot loga"
+            ],
+            "desc": "Nastavení doby trvání boot loga (s=sekundy)"
+        },
+        "AdvancedIdle": {
+            "text2": [
+                "Podrobná obr.",
+                "nečinnosti"
+            ],
+            "desc": "Zobrazit detailní informace malým fontem na obrazovce nečinnosti"
+        },
+        "AdvancedSoldering": {
+            "text2": [
+                "Podrobná obr.",
+                "pájení"
+            ],
+            "desc": "Zobrazit detailní informace malým fontem na obrazovce pájení"
+        },
+        "PowerLimit": {
+            "text2": [
+                "Omezení",
+                "Výkonu"
+            ],
+            "desc": "Maximální příkon páječky (W=watt)"
+        },
+        "CalibrateCJC": {
+            "text2": [
+                "Calibrate CJC",
+                "at next boot"
+            ],
+            "desc": "At next boot tip Cold Junction Compensation will be calibrated (not required if Delta T is < 5°C)"
+        },
+        "VoltageCalibration": {
+            "text2": [
+                "Kalibrovat",
+                "vstupní napětí?"
+            ],
+            "desc": "Začít kalibraci vstupního napětí (dlouhý stisk pro ukončení)"
+        },
+        "PowerPulsePower": {
+            "text2": [
+                "Napájecí",
+                "pulz"
+            ],
+            "desc": "Intenzita výkonu pulzu pro udržení páječky vzhůru (watt)"
+        },
+        "PowerPulseWait": {
+            "text2": [
+                "Prodleva",
+                "napáj. pulzu"
+            ],
+            "desc": "Prodleva než je spuštěn pulz pro udržení páječky vzhůru pulzu pro udržení páječky vzhůru (x 2,5s)"
+        },
+        "PowerPulseDuration": {
+            "text2": [
+                "Délka",
+                "napáj. pulzu"
+            ],
+            "desc": "Délka pulzu pro udržení páječky vzhůru (x 250ms)"
+        },
+        "SettingsReset": {
+            "text2": [
+                "Obnovit tovární",
+                "nastavení?"
+            ],
+            "desc": "Obnovit všechna nastavení na výchozí"
+        },
+        "LanguageSwitch": {
+            "text2": [
+                "Jazyk:",
+                " CS       Český"
+            ],
+            "desc": ""
+        }
+    }
+}

Translations/translation_DA.json

@@ -1,207 +1,341 @@
-{
-  "languageCode": "DA",
-  "languageLocalName": "Dansk",
-  "fonts": ["ascii_basic", "latin_extended"],
-  "tempUnitFahrenheit": false,
-  "messages": {
-    "SettingsCalibrationWarning": "Sørg for at loddespidsen er ved stuetemperatur, inden du fortsætter!",
-    "SettingsResetWarning": "Are you sure to reset settings to default values?",
-    "UVLOWarningString": "Lav Volt",
-    "UndervoltageString": "Undervoltage",
-    "InputVoltageString": "Input V: ",
-    "SleepingSimpleString": "Zzzz",
-    "SleepingAdvancedString": "Dvale...",
-    "SleepingTipAdvancedString": "Tip:",
-    "OffString": "Off"
-  },
-  "messagesWarn": {
-    "ResetOKMessage": "Reset OK",
-    "SettingsResetMessage": ["Certain settings", "were changed!"],
-    "NoAccelerometerMessage": ["No accelerometer", "detected!"],
-    "NoPowerDeliveryMessage": ["No USB-PD IC", "detected!"],
-    "LockingKeysString": "LOCKED",
-    "UnlockingKeysString": "UNLOCKED",
-    "WarningKeysLockedString": "!LOCKED!",
-    "WarningThermalRunaway": ["Thermal", "Runaway"]
-  },
-  "characters": {
-    "SettingRightChar": "H",
-    "SettingLeftChar": "V",
-    "SettingAutoChar": "A",
-    "SettingOffChar": "O",
-    "SettingSlowChar": "S",
-    "SettingMediumChar": "M",
-    "SettingFastChar": "F",
-    "SettingStartNoneChar": "S",
-    "SettingStartSolderingChar": "L",
-    "SettingStartSleepChar": "D",
-    "SettingStartSleepOffChar": "R",
-    "SettingSensitivityOff": "O",
-    "SettingSensitivityLow": "L",
-    "SettingSensitivityMedium": "M",
-    "SettingSensitivityHigh": "H",
-    "SettingLockDisableChar": "D",
-    "SettingLockBoostChar": "B",
-    "SettingLockFullChar": "F"
-  },
-  "menuGroups": {
-    "PowerMenu": {
-      "text2": ["Power", "settings"],
-      "desc": "Power settings"
-    },
-    "SolderingMenu": {
-      "text2": ["Soldering", "settings"],
-      "desc": "Soldering settings"
-    },
-    "PowerSavingMenu": {
-      "text2": ["Sleep", "mode"],
-      "desc": "Power saving settings"
-    },
-    "UIMenu": {
-      "text2": ["User", "interface"],
-      "desc": "User interface settings"
-    },
-    "AdvancedMenu": {
-      "text2": ["Advanced", "settings"],
-      "desc": "Advanced settings"
-    }
-  },
-  "menuOptions": {
-    "DCInCutoff": {
-      "text2": ["Power", "source"],
-      "desc": "Strømforsyning. Indstil Cutoff Spændingen. (DC 10V) (S 3,3V per cell)"
-    },
-    "SleepTemperature": {
-      "text2": ["Sleep", "temp"],
-      "desc": "Dvale Temperatur (C)"
-    },
-    "SleepTimeout": {
-      "text2": ["Sleep", "timeout"],
-      "desc": "Dvale Timeout (Minutter | Sekunder)"
-    },
-    "ShutdownTimeout": {
-      "text2": ["Shutdown", "timeout"],
-      "desc": "sluknings Timeout (Minutter)"
-    },
-    "MotionSensitivity": {
-      "text2": ["Motion", "sensitivity"],
-      "desc": "Bevægelsesfølsomhed (0=Slukket | 1=Mindst følsom | ... | 9=Mest følsom)"
-    },
-    "TemperatureUnit": {
-      "text2": ["Temperature", "unit"],
-      "desc": "Temperatur Enhed (C=Celsius | F=Fahrenheit)"
-    },
-    "AdvancedIdle": {
-      "text2": ["Detailed", "idle screen"],
-      "desc": "Vis detialieret information med en mindre skriftstørrelse på standby skærmen."
-    },
-    "DisplayRotation": {
-      "text2": ["Display", "orientation"],
-      "desc": "Skærm Orientering (H=Højre Håndet | V=Venstre Håndet | A=Automatisk)"
-    },
-    "BoostTemperature": {
-      "text2": ["Boost", "temp"],
-      "desc": "Temperatur i \"boost\" mode"
-    },
-    "AutoStart": {
-      "text2": ["Start-up", "behavior"],
-      "desc": "Start automatisk med lodning når strøm sættes til. (S=Slukket | L=Lodning | D=Dvale tilstand | R=Dvale tilstand rumtemperatur)"
-    },
-    "CooldownBlink": {
-      "text2": ["Cooldown", "flashing"],
-      "desc": "Blink temperaturen på skærmen, mens spidsen stadig er varm."
-    },
-    "TemperatureCalibration": {
-      "text2": ["Calibrate", "temperature?"],
-      "desc": "kalibrere spids temperatur."
-    },
-    "SettingsReset": {
-      "text2": ["Restore factory", "settings?"],
-      "desc": "Gendan alle indstillinger"
-    },
-    "VoltageCalibration": {
-      "text2": ["Calibrate", "input voltage?"],
-      "desc": "VIN kalibrering. Knapperne justere, Lang tryk for at gå ud"
-    },
-    "AdvancedSoldering": {
-      "text2": ["Detailed", "solder screen"],
-      "desc": "Vis detialieret information mens der loddes"
-    },
-    "ScrollingSpeed": {
-      "text2": ["Scrolling", "speed"],
-      "desc": "Speed info text scrolls past at (S=slow | F=fast)"
-    },
-    "QCMaxVoltage": {
-      "text2": ["QC", "voltage"],
-      "desc": "Max QC voltage the iron should negotiate for"
-    },
-    "PDNegTimeout": {
-      "text2": ["PD", "timeout"],
-      "desc": "PD negotiation timeout in 100ms steps for compatibility with some QC chargers (0: disabled)"
-    },
-    "PowerLimit": {
-      "text2": ["Power", "limit"],
-      "desc": "Maximum power the iron can use (W=watt)"
-    },
-    "ReverseButtonTempChange": {
-      "text2": ["Swap", "+ - keys"],
-      "desc": "Reverse assignment of buttons for temperature adjustment"
-    },
-    "TempChangeShortStep": {
-      "text2": ["Temp change", "short"],
-      "desc": "Temperature-change-increment on short button press"
-    },
-    "TempChangeLongStep": {
-      "text2": ["Temp change", "long"],
-      "desc": "Temperature-change-increment on long button press"
-    },
-    "PowerPulsePower": {
-      "text2": ["Power", "pulse"],
-      "desc": "Intensity of power of keep-awake-pulse (watt)"
-    },
-    "HallEffSensitivity": {
-      "text2": ["Hall sensor", "sensitivity"],
-      "desc": "Sensitivity of the Hall effect sensor to detect sleep (0=Slukket | 1=Mindst følsom | ... | 9=Mest følsom)"
-    },
-    "LockingMode": {
-      "text2": ["Allow locking", "buttons"],
-      "desc": "While soldering, hold down both buttons to toggle locking them (D=disable | B=boost mode only | F=full locking)"
-    },
-    "MinVolCell": {
-      "text2": ["Minimum", "voltage"],
-      "desc": "Minimum allowed voltage per cell (3S: 3 - 3,7V | 4-6S: 2,4 - 3,7V)"
-    },
-    "AnimLoop": {
-      "text2": ["Anim.", "loop"],
-      "desc": "Loop icon animations in main menu"
-    },
-    "AnimSpeed": {
-      "text2": ["Anim.", "speed"],
-      "desc": "Pace of icon animations in menu (O=off | S=slow | M=medium | F=fast)"
-    },
-    "PowerPulseWait": {
-      "text2": ["Power pulse", "delay"],
-      "desc": "Delay before keep-awake-pulse is triggered (x 2,5s)"
-    },
-    "PowerPulseDuration": {
-      "text2": ["Power pulse", "duration"],
-      "desc": "Keep-awake-pulse duration (x 250ms)"
-    },
-    "LanguageSwitch": {
-      "text2": ["Sprog :", " DA       Dansk"],
-      "desc": ""
-    },
-    "Brightness": {
-      "text2": ["Screen", "brightness"],
-      "desc": "Adjust the brightness of the OLED screen"
-    },
-    "ColourInversion": {
-      "text2": ["Invert", "screen"],
-      "desc": "Invert the colours of the OLED screen"
-    },
-    "LOGOTime": {
-      "text2": ["Boot logo", "duration"],
-      "desc": "Sets the duration for the boot logo (s=seconds)"
-    }
-  }
-}
+{
+    "languageCode": "DA",
+    "languageLocalName": "Dansk",
+    "tempUnitFahrenheit": false,
+    "messages": {
+        "SettingsCalibrationWarning": "Before rebooting, make sure tip & handle are at room temperature!",
+        "CJCCalibrating": "calibrating",
+        "SettingsResetWarning": "Er du sikker du vil resette indstillingerne til standard?",
+        "UVLOWarningString": "Lav Volt",
+        "UndervoltageString": "Undervolt",
+        "InputVoltageString": "Input V: ",
+        "SleepingSimpleString": "Zzzz",
+        "SleepingAdvancedString": "Dvale...",
+        "SleepingTipAdvancedString": "Tip:",
+        "OffString": "Off",
+        "DeviceFailedValidationWarning": "Din enhed er højst sandsyneligt en Kopivare!"
+    },
+    "messagesWarn": {
+        "CJCCalibrationDone": [
+            "Calibration",
+            "done!"
+        ],
+        "ResetOKMessage": "Reset OK",
+        "SettingsResetMessage": [
+            "Visse indstillinger",
+            "Er blevet ændret!"
+        ],
+        "NoAccelerometerMessage": [
+            "ingen accelerometer",
+            "fundet!"
+        ],
+        "NoPowerDeliveryMessage": [
+            "ingen USB-PD IC",
+            "Fundet!"
+        ],
+        "LockingKeysString": "LÅST",
+        "UnlockingKeysString": "ULÅST",
+        "WarningKeysLockedString": "!LÅST!",
+        "WarningThermalRunaway": [
+            "Thermal",
+            "Runaway"
+        ]
+    },
+    "characters": {
+        "SettingRightChar": "H",
+        "SettingLeftChar": "V",
+        "SettingAutoChar": "A",
+        "SettingOffChar": "O",
+        "SettingSlowChar": "S",
+        "SettingMediumChar": "M",
+        "SettingFastChar": "F",
+        "SettingStartNoneChar": "S",
+        "SettingStartSolderingChar": "L",
+        "SettingStartSleepChar": "D",
+        "SettingStartSleepOffChar": "R",
+        "SettingSensitivityOff": "O",
+        "SettingSensitivityLow": "L",
+        "SettingSensitivityMedium": "M",
+        "SettingSensitivityHigh": "H",
+        "SettingLockDisableChar": "D",
+        "SettingLockBoostChar": "B",
+        "SettingLockFullChar": "F"
+    },
+    "menuGroups": {
+        "PowerMenu": {
+            "text2": [
+                "Strøm",
+                "Indstillinger"
+            ],
+            "desc": ""
+        },
+        "SolderingMenu": {
+            "text2": [
+                "Lodde",
+                "Indstillinger"
+            ],
+            "desc": ""
+        },
+        "PowerSavingMenu": {
+            "text2": [
+                "Dvale",
+                "mode"
+            ],
+            "desc": ""
+        },
+        "UIMenu": {
+            "text2": [
+                "Bruger",
+                "Grændseflade"
+            ],
+            "desc": ""
+        },
+        "AdvancedMenu": {
+            "text2": [
+                "Advancerede",
+                "Indstillinger"
+            ],
+            "desc": ""
+        }
+    },
+    "menuOptions": {
+        "DCInCutoff": {
+            "text2": [
+                "Strøm",
+                "Kilde"
+            ],
+            "desc": "Strømforsyning. Indstil Cutoff Spændingen. (DC 10V) (S 3,3V per celle)"
+        },
+        "MinVolCell": {
+            "text2": [
+                "Minimum",
+                "Spænding"
+            ],
+            "desc": "Minimum tilladt spænding pr. celle (3S: 3 - 3,7V | 4-6S: 2,4 - 3,7V)"
+        },
+        "QCMaxVoltage": {
+            "text2": [
+                "QC",
+                "Spænding"
+            ],
+            "desc": "Max QC spænding Loddekolben skal forhandle sig til"
+        },
+        "PDNegTimeout": {
+            "text2": [
+                "PD",
+                "timeout"
+            ],
+            "desc": "PD-forhandlingstimeout i trin på 100 ms for kompatibilitet med nogle QC-opladere"
+        },
+        "BoostTemperature": {
+            "text2": [
+                "Boost",
+                "temp"
+            ],
+            "desc": "Temperatur i \"boost mode\""
+        },
+        "AutoStart": {
+            "text2": [
+                "Start-up",
+                "Opførsel"
+            ],
+            "desc": "Start automatisk med lodning når strøm sættes til. (S=Slukket | L=Lodning | D=Dvale tilstand | R=Dvale tilstand rumtemperatur)"
+        },
+        "TempChangeShortStep": {
+            "text2": [
+                "Temp ændring",
+                "kort"
+            ],
+            "desc": "Temperatur-ændring-stigning ved kort tryk på knappen"
+        },
+        "TempChangeLongStep": {
+            "text2": [
+                "Temp ændring",
+                "lang"
+            ],
+            "desc": "Temperatur-ændring-stigning ved lang tryk på knappen"
+        },
+        "LockingMode": {
+            "text2": [
+                "Tillad låsning",
+                "af knapperne"
+            ],
+            "desc": "Hold begge knapper nede under lodning for at låse dem (D=deaktiver | B=kun boost-tilstand | F=fuld låsning)"
+        },
+        "MotionSensitivity": {
+            "text2": [
+                "Bevægelses",
+                "følsomhed"
+            ],
+            "desc": "Bevægelsesfølsomhed (0=Slukket | 1=Mindst følsom | ... | 9=Mest følsom)"
+        },
+        "SleepTemperature": {
+            "text2": [
+                "Dvale",
+                "temp"
+            ],
+            "desc": "Dvale Temperatur (C)"
+        },
+        "SleepTimeout": {
+            "text2": [
+                "Dvale",
+                "timeout"
+            ],
+            "desc": "Dvale Timeout (Minutter | Sekunder)"
+        },
+        "ShutdownTimeout": {
+            "text2": [
+                "Sluknings",
+                "timeout"
+            ],
+            "desc": "sluknings Timeout (Minutter)"
+        },
+        "HallEffSensitivity": {
+            "text2": [
+                "Hall sensor",
+                "følsomhed"
+            ],
+            "desc": "følsomhed overfor magneten (0=Slukket | 1=Mindst følsom | ... | 9=Mest følsom)"
+        },
+        "TemperatureUnit": {
+            "text2": [
+                "Temperatur",
+                "Enhed"
+            ],
+            "desc": "Temperatur Enhed (C=Celsius | F=Fahrenheit)"
+        },
+        "DisplayRotation": {
+            "text2": [
+                "Skærm",
+                "Orientering"
+            ],
+            "desc": "Skærm Orientering (H=Højre Håndet | V=Venstre Håndet | A=Automatisk)"
+        },
+        "CooldownBlink": {
+            "text2": [
+                "Køl ned",
+                "Blinkning"
+            ],
+            "desc": "Blink temperaturen på skærmen, mens spidsen stadig er varm."
+        },
+        "ScrollingSpeed": {
+            "text2": [
+                "Scrolling",
+                "Hastighed"
+            ],
+            "desc": "Hastigheden infotekst ruller forbi med (S=Langsom | F=Hurtigt)"
+        },
+        "ReverseButtonTempChange": {
+            "text2": [
+                "Skift",
+                "+ - tasterne"
+            ],
+            "desc": "Skift tildeling af knapper til temperaturjustering"
+        },
+        "AnimSpeed": {
+            "text2": [
+                "Anim.",
+                "Hastighed"
+            ],
+            "desc": "Hastigheden for ikonanimationer i menuen (O=fra | S=langsomt | M=medium | F=hurtigt)"
+        },
+        "AnimLoop": {
+            "text2": [
+                "Anim.",
+                "sløfe"
+            ],
+            "desc": "ikonanimation sløfe i hovedmenuen"
+        },
+        "Brightness": {
+            "text2": [
+                "Skærm",
+                "lysstyrke"
+            ],
+            "desc": "Juster lysstyrken på OLED-skærmen"
+        },
+        "ColourInversion": {
+            "text2": [
+                "spejlvende",
+                "skærm"
+            ],
+            "desc": "spejlvende farverne på OLED-skærmen"
+        },
+        "LOGOTime": {
+            "text2": [
+                "opstartslogo",
+                "varighed"
+            ],
+            "desc": "Indstiller varigheden for opstartslogoet (s=sekunder)"
+        },
+        "AdvancedIdle": {
+            "text2": [
+                "Detaljeret",
+                "Standby skærm"
+            ],
+            "desc": "Vis detialieret information med en mindre skriftstørrelse på standby skærmen."
+        },
+        "AdvancedSoldering": {
+            "text2": [
+                "Detaljeret",
+                "loddeskærm"
+            ],
+            "desc": "Vis detaljeret information mens der loddes"
+        },
+        "PowerLimit": {
+            "text2": [
+                "Strøm",
+                "begrænsning"
+            ],
+            "desc": "Maksimal effekt Loddekolben kan bruge (W=watt)"
+        },
+        "CalibrateCJC": {
+            "text2": [
+                "kalibrere CJK",
+                "under næste opstart"
+            ],
+            "desc": "At next boot tip Cold Junction Compensation will be calibrated (not required if Delta T is < 5°C)"
+        },
+        "VoltageCalibration": {
+            "text2": [
+                "Kalibrere",
+                "input spændingen?"
+            ],
+            "desc": "VIN kalibrering. Knapperne justere, Lang tryk for at gå ud"
+        },
+        "PowerPulsePower": {
+            "text2": [
+                "Strøm",
+                "puls"
+            ],
+            "desc": "Intensiteten af strøm for hold-vågen-puls (watt)"
+        },
+        "PowerPulseWait": {
+            "text2": [
+                "Strøm puls",
+                "Forsinkelse"
+            ],
+            "desc": "Forsinkelse før hold-vågen-puls udløses (x 2,5s)"
+        },
+        "PowerPulseDuration": {
+            "text2": [
+                "Strøm puls",
+                "varighed"
+            ],
+            "desc": "Hold-vågen-pulsvarighed (x 250ms)"
+        },
+        "SettingsReset": {
+            "text2": [
+                "Gendan fabriks",
+                "Indstillinger"
+            ],
+            "desc": "Gendan alle indstillinger"
+        },
+        "LanguageSwitch": {
+            "text2": [
+                "Sprog:",
+                " DA       Dansk"
+            ],
+            "desc": ""
+        }
+    }
+}

Translations/translation_DE.json

@@ -1,207 +1,341 @@
-{
-  "languageCode": "DE",
-  "languageLocalName": "Deutsch",
-  "fonts": ["ascii_basic", "latin_extended"],
-  "tempUnitFahrenheit": false,
-  "messages": {
-    "SettingsCalibrationWarning": "Vor dem Fortfahren muss die Lötspitze vollständig abgekühlt sein!",
-    "SettingsResetWarning": "Sicher, dass alle Werte zurückgesetzt werden sollen?",
-    "UVLOWarningString": "V niedr.",
-    "UndervoltageString": "Unterspannung",
-    "InputVoltageString": "V Eingang: ",
-    "SleepingSimpleString": "Zzzz",
-    "SleepingAdvancedString": "Ruhemodus...",
-    "SleepingTipAdvancedString": "Temp:",
-    "OffString": "Aus"
-  },
-  "messagesWarn": {
-    "ResetOKMessage": "Reset OK",
-    "SettingsResetMessage": ["Einstellungen", "zurückgesetzt!"],
-    "NoAccelerometerMessage": ["Bewegungssensor", "nicht erkannt!"],
-    "NoPowerDeliveryMessage": ["USB-PD IC", "nicht erkannt!"],
-    "LockingKeysString": "GESPERRT",
-    "UnlockingKeysString": "ENTSPERRT",
-    "WarningKeysLockedString": "!GESPERRT!",
-    "WarningThermalRunaway": ["Thermal", "Runaway"]
-  },
-  "characters": {
-    "SettingRightChar": "R",
-    "SettingLeftChar": "L",
-    "SettingAutoChar": "A",
-    "SettingOffChar": "A",
-    "SettingSlowChar": "L",
-    "SettingMediumChar": "M",
-    "SettingFastChar": "S",
-    "SettingStartNoneChar": "A",
-    "SettingStartSolderingChar": "L",
-    "SettingStartSleepChar": "R",
-    "SettingStartSleepOffChar": "K",
-    "SettingSensitivityOff": "A",
-    "SettingSensitivityLow": "N",
-    "SettingSensitivityMedium": "M",
-    "SettingSensitivityHigh": "H",
-    "SettingLockDisableChar": "A",
-    "SettingLockBoostChar": "B",
-    "SettingLockFullChar": "V"
-  },
-  "menuGroups": {
-    "PowerMenu": {
-      "text2": ["Energie-", "einstellungen"],
-      "desc": "Energieeinstellungen"
-    },
-    "SolderingMenu": {
-      "text2": ["Löt-", "einstellungen"],
-      "desc": "Löteinstellungen"
-    },
-    "PowerSavingMenu": {
-      "text2": ["Ruhe-", "modus"],
-      "desc": "Energiespareinstellungen"
-    },
-    "UIMenu": {
-      "text2": ["Anzeige-", "einstellungen"],
-      "desc": "Menüeinstellungen"
-    },
-    "AdvancedMenu": {
-      "text2": ["Erweiterte", "Einstellungen"],
-      "desc": "Erweiterte Einstellungen"
-    }
-  },
-  "menuOptions": {
-    "DCInCutoff": {
-      "text2": ["Spannungs-", "quelle"],
-      "desc": "Spannungsquelle (Abschaltspannung) (DC=10V | nS=n*3.3V für n LiIon-Zellen)"
-    },
-    "SleepTemperature": {
-      "text2": ["Ruhe-", "temperatur"],
-      "desc": "Ruhetemperatur der Spitze"
-    },
-    "SleepTimeout": {
-      "text2": ["Ruhever-", "zögerung"],
-      "desc": "Dauer vor Übergang in den Ruhemodus (s=Sekunden | m=Minuten)"
-    },
-    "ShutdownTimeout": {
-      "text2": ["Abschalt-", "verzög."],
-      "desc": "Dauer vor automatischer Abschaltung (m=Minuten)"
-    },
-    "MotionSensitivity": {
-      "text2": ["Bewegungs-", "empfindlichk."],
-      "desc": "0=aus | 1=minimal | ... | 9=maximal"
-    },
-    "TemperatureUnit": {
-      "text2": ["Temperatur-", "einheit"],
-      "desc": "C=Celsius | F=Fahrenheit"
-    },
-    "AdvancedIdle": {
-      "text2": ["Detaillierte", "Ruheansicht"],
-      "desc": "Detaillierte Anzeige im Ruhemodus"
-    },
-    "DisplayRotation": {
-      "text2": ["Anzeige-", "ausrichtung"],
-      "desc": "R=rechtshändig | L=linkshändig | A=automatisch"
-    },
-    "BoostTemperature": {
-      "text2": ["Boost-", "temperatur"],
-      "desc": "Temperatur der Lötspitze im Boostmodus"
-    },
-    "AutoStart": {
-      "text2": ["Start im", "Lötmodus"],
-      "desc": "Heizverhalten beim Einschalten der Spannungsversorgung (A=aus | L=Lötmodus | R=Ruhemodus | K=Ruhemodus mit kalter Spitze)"
-    },
-    "CooldownBlink": {
-      "text2": ["Abkühl-", "blinken"],
-      "desc": "Temperaturanzeige blinkt beim Abkühlen, solange Spitze heiß ist"
-    },
-    "TemperatureCalibration": {
-      "text2": ["Temperatur", "kalibrieren?"],
-      "desc": "Kalibrierung der Lötspitzentemperatur"
-    },
-    "SettingsReset": {
-      "text2": ["Einstellungen", "zurücksetzen?"],
-      "desc": "Werte auf Werkseinstellungen zurücksetzen"
-    },
-    "VoltageCalibration": {
-      "text2": ["Eingangsspannung", "kalibrieren?"],
-      "desc": "Kalibrierung der Eingangsspannung (Langer Tastendruck zum Verlassen)"
-    },
-    "AdvancedSoldering": {
-      "text2": ["Detaillierte", "Lötansicht"],
-      "desc": "Detaillierte Anzeige im Lötmodus"
-    },
-    "ScrollingSpeed": {
-      "text2": ["Scroll-", "geschw."],
-      "desc": "Scrollgeschwindigkeit der Erläuterungen (L=langsam | S=schnell)"
-    },
-    "QCMaxVoltage": {
-      "text2": ["Spannungs-", "maximum"],
-      "desc": "Maximal zulässige Spannung der verwendeten Spannungsversorgung (V=Volt)"
-    },
-    "PDNegTimeout": {
-      "text2": ["PD", "timeout"],
-      "desc": "PD Abfragedauer in 100ms Schritten (Kompatibilität mit best. QC-Ladegeräten)"
-    },
-    "PowerLimit": {
-      "text2": ["Leistungs-", "maximum"],
-      "desc": "Maximal zulässige Leistungsaufnahme des Lötkolbens (W=Watt)"
-    },
-    "ReverseButtonTempChange": {
-      "text2": ["+- Tasten", "umkehren?"],
-      "desc": "Tastenbelegung zur Temperaturänderung umkehren"
-    },
-    "TempChangeShortStep": {
-      "text2": ["Temp-Schritt", "Druck kurz"],
-      "desc": "Schrittweite für Temperaturwechsel bei kurzem Tastendruck"
-    },
-    "TempChangeLongStep": {
-      "text2": ["Temp-Schritt", "Druck lang"],
-      "desc": "Schrittweite für Temperaturwechsel bei langem Tastendruck"
-    },
-    "PowerPulsePower": {
-      "text2": ["Leistungs-", "impuls"],
-      "desc": "Powerbank mit einem Impuls wach halten (Watt)"
-    },
-    "HallEffSensitivity": {
-      "text2": ["Empfindlichkeit", "der Hall-Sonde"],
-      "desc": "Empfindlichkeit der Hall-Sonde beim Erkennen des Ruhemodus (0=aus | 1=minimal | ... | 9=maximal)"
-    },
-    "LockingMode": {
-      "text2": ["Tasten-", "sperre"],
-      "desc": "Langes drücken beider Tasten im Lötmodus sperrt diese (A=aus | B=nur Boost | V=vollständig)"
-    },
-    "MinVolCell": {
-      "text2": ["Minimale", "Spannung"],
-      "desc": "Minimal zulässige Spannung pro Zelle (3S: 3 - 3,7V | 4-6S: 2,4 - 3,7V)"
-    },
-    "AnimLoop": {
-      "text2": ["Anim.", "Schleife"],
-      "desc": "Icon-Animationen im Hauptmenü wiederholen"
-    },
-    "AnimSpeed": {
-      "text2": ["Anim.", "Geschw."],
-      "desc": "Geschwindigkeit der Icon-Animationen im Menü (A=aus | L=langsam | M=mittel | S=schnell)"
-    },
-    "PowerPulseWait": {
-      "text2": ["Impuls-", "verzögerung"],
-      "desc": "Dauer vor Abgabe von Wachhalteimpulsen (x 2,5s)"
-    },
-    "PowerPulseDuration": {
-      "text2": ["Impuls-", "dauer"],
-      "desc": "Dauer des Wachhalteimpulses (x 250ms)"
-    },
-    "LanguageSwitch": {
-      "text2": ["Sprache:", " DE     Deutsch"],
-      "desc": "Sprache der Firmware ändern"
-    },
-    "Brightness": {
-      "text2": ["Bildschirm-", "kontrast"],
-      "desc": "Verändert die Helligkeit des OLED-Displays"
-    },
-    "ColourInversion": {
-      "text2": ["Farben", "umkehren"],
-      "desc": "Invertiert die Farben des OLED-Displays"
-    },
-    "LOGOTime": {
-      "text2": ["Startlogo-", "dauer"],
-      "desc": "Legt die Dauer der Anzeige des Startlogos fest (s=Sekunden)"
-    }
-  }
-}
+{
+    "languageCode": "DE",
+    "languageLocalName": "Deutsch",
+    "tempUnitFahrenheit": false,
+    "messages": {
+        "SettingsCalibrationWarning": "Vor dem Neustart bitte sicherstellen, dass Lötspitze & Gerät Raumtemperatur haben!",
+        "CJCCalibrating": "kalibriere",
+        "SettingsResetWarning": "Sicher, dass alle Werte zurückgesetzt werden sollen?",
+        "UVLOWarningString": "V niedr.",
+        "UndervoltageString": "Unterspannung",
+        "InputVoltageString": "V Eingang: ",
+        "SleepingSimpleString": "Zzzz",
+        "SleepingAdvancedString": "Ruhemodus...",
+        "SleepingTipAdvancedString": "Temp:",
+        "OffString": "Aus",
+        "DeviceFailedValidationWarning": "Höchstwahrscheinlich ist das Gerät eine Fälschung!"
+    },
+    "messagesWarn": {
+        "CJCCalibrationDone": [
+            "Erfolgreich",
+            "kalibriert!"
+        ],
+        "ResetOKMessage": "Reset OK",
+        "SettingsResetMessage": [
+            "Einstellungen",
+            "zurückgesetzt!"
+        ],
+        "NoAccelerometerMessage": [
+            "Bewegungssensor",
+            "nicht erkannt!"
+        ],
+        "NoPowerDeliveryMessage": [
+            "USB-PD IC",
+            "nicht erkannt!"
+        ],
+        "LockingKeysString": "GESPERRT",
+        "UnlockingKeysString": "ENTSPERRT",
+        "WarningKeysLockedString": "!GESPERRT!",
+        "WarningThermalRunaway": [
+            "Thermal",
+            "Runaway"
+        ]
+    },
+    "characters": {
+        "SettingRightChar": "R",
+        "SettingLeftChar": "L",
+        "SettingAutoChar": "A",
+        "SettingOffChar": "A",
+        "SettingSlowChar": "L",
+        "SettingMediumChar": "M",
+        "SettingFastChar": "S",
+        "SettingStartNoneChar": "A",
+        "SettingStartSolderingChar": "L",
+        "SettingStartSleepChar": "R",
+        "SettingStartSleepOffChar": "K",
+        "SettingSensitivityOff": "A",
+        "SettingSensitivityLow": "N",
+        "SettingSensitivityMedium": "M",
+        "SettingSensitivityHigh": "H",
+        "SettingLockDisableChar": "A",
+        "SettingLockBoostChar": "B",
+        "SettingLockFullChar": "V"
+    },
+    "menuGroups": {
+        "PowerMenu": {
+            "text2": [
+                "Energie-",
+                "einstellungen"
+            ],
+            "desc": ""
+        },
+        "SolderingMenu": {
+            "text2": [
+                "Löt-",
+                "einstellungen"
+            ],
+            "desc": ""
+        },
+        "PowerSavingMenu": {
+            "text2": [
+                "Ruhe-",
+                "modus"
+            ],
+            "desc": ""
+        },
+        "UIMenu": {
+            "text2": [
+                "Anzeige-",
+                "einstellungen"
+            ],
+            "desc": ""
+        },
+        "AdvancedMenu": {
+            "text2": [
+                "Erweiterte",
+                "Einstellungen"
+            ],
+            "desc": ""
+        }
+    },
+    "menuOptions": {
+        "DCInCutoff": {
+            "text2": [
+                "Spannungs-",
+                "quelle"
+            ],
+            "desc": "Spannungsquelle (Abschaltspannung) (DC=10V | nS=n*3.3V für n LiIon-Zellen)"
+        },
+        "MinVolCell": {
+            "text2": [
+                "Minimale",
+                "Spannung"
+            ],
+            "desc": "Minimal zulässige Spannung pro Zelle (3S: 3 - 3,7V | 4-6S: 2,4 - 3,7V)"
+        },
+        "QCMaxVoltage": {
+            "text2": [
+                "Spannungs-",
+                "maximum"
+            ],
+            "desc": "Maximal zulässige Spannung der verwendeten Spannungsversorgung (V=Volt)"
+        },
+        "PDNegTimeout": {
+            "text2": [
+                "PD",
+                "timeout"
+            ],
+            "desc": "PD Abfragedauer in 100ms Schritten (Kompatibilität mit best. QC-Ladegeräten)"
+        },
+        "BoostTemperature": {
+            "text2": [
+                "Boost-",
+                "temperatur"
+            ],
+            "desc": "Temperatur der Lötspitze im Boostmodus"
+        },
+        "AutoStart": {
+            "text2": [
+                "Start im",
+                "Lötmodus"
+            ],
+            "desc": "Heizverhalten beim Einschalten der Spannungsversorgung (A=aus | L=Lötmodus | R=Ruhemodus | K=Ruhemodus mit kalter Spitze)"
+        },
+        "TempChangeShortStep": {
+            "text2": [
+                "Temp-Schritt",
+                "Druck kurz"
+            ],
+            "desc": "Schrittweite für Temperaturwechsel bei kurzem Tastendruck"
+        },
+        "TempChangeLongStep": {
+            "text2": [
+                "Temp-Schritt",
+                "Druck lang"
+            ],
+            "desc": "Schrittweite für Temperaturwechsel bei langem Tastendruck"
+        },
+        "LockingMode": {
+            "text2": [
+                "Tasten-",
+                "sperre"
+            ],
+            "desc": "Langes drücken beider Tasten im Lötmodus sperrt diese (A=aus | B=nur Boost | V=vollständig)"
+        },
+        "MotionSensitivity": {
+            "text2": [
+                "Bewegungs-",
+                "empfindlichk."
+            ],
+            "desc": "0=aus | 1=minimal | ... | 9=maximal"
+        },
+        "SleepTemperature": {
+            "text2": [
+                "Ruhe-",
+                "temperatur"
+            ],
+            "desc": "Ruhetemperatur der Spitze"
+        },
+        "SleepTimeout": {
+            "text2": [
+                "Ruhever-",
+                "zögerung"
+            ],
+            "desc": "Dauer vor Übergang in den Ruhemodus (s=Sekunden | m=Minuten)"
+        },
+        "ShutdownTimeout": {
+            "text2": [
+                "Abschalt-",
+                "verzög."
+            ],
+            "desc": "Dauer vor automatischer Abschaltung (m=Minuten)"
+        },
+        "HallEffSensitivity": {
+            "text2": [
+                "Empfindlichkeit",
+                "der Hall-Sonde"
+            ],
+            "desc": "Empfindlichkeit der Hall-Sonde um den Ruhemodus auszulösen (0=aus | 1=minimal | ... | 9=maximal)"
+        },
+        "TemperatureUnit": {
+            "text2": [
+                "Temperatur-",
+                "einheit"
+            ],
+            "desc": "C=°Celsius | F=°Fahrenheit"
+        },
+        "DisplayRotation": {
+            "text2": [
+                "Anzeige-",
+                "ausrichtung"
+            ],
+            "desc": "R=rechtshändig | L=linkshändig | A=automatisch"
+        },
+        "CooldownBlink": {
+            "text2": [
+                "Abkühl-",
+                "blinken"
+            ],
+            "desc": "Temperaturanzeige blinkt beim Abkühlen, solange Spitze heiß ist"
+        },
+        "ScrollingSpeed": {
+            "text2": [
+                "Scroll-",
+                "geschw."
+            ],
+            "desc": "Scrollgeschwindigkeit der Erläuterungen (L=langsam | S=schnell)"
+        },
+        "ReverseButtonTempChange": {
+            "text2": [
+                "+- Tasten",
+                "umkehren?"
+            ],
+            "desc": "Tastenbelegung zur Temperaturänderung umkehren"
+        },
+        "AnimSpeed": {
+            "text2": [
+                "Anim.",
+                "Geschw."
+            ],
+            "desc": "Geschwindigkeit der Icon-Animationen im Menü (A=aus | L=langsam | M=mittel | S=schnell)"
+        },
+        "AnimLoop": {
+            "text2": [
+                "Anim.",
+                "Schleife"
+            ],
+            "desc": "Icon-Animationen im Hauptmenü wiederholen"
+        },
+        "Brightness": {
+            "text2": [
+                "Bildschirm-",
+                "kontrast"
+            ],
+            "desc": "Verändert die Helligkeit des OLED-Displays"
+        },
+        "ColourInversion": {
+            "text2": [
+                "Farben",
+                "umkehren"
+            ],
+            "desc": "Invertiert die Farben des OLED-Displays"
+        },
+        "LOGOTime": {
+            "text2": [
+                "Startlogo-",
+                "dauer"
+            ],
+            "desc": "Legt die Dauer der Anzeige des Startlogos fest (s=Sekunden)"
+        },
+        "AdvancedIdle": {
+            "text2": [
+                "Detaillierte",
+                "Ruheansicht"
+            ],
+            "desc": "Detaillierte Anzeige im Ruhemodus"
+        },
+        "AdvancedSoldering": {
+            "text2": [
+                "Detaillierte",
+                "Lötansicht"
+            ],
+            "desc": "Detaillierte Anzeige im Lötmodus"
+        },
+        "PowerLimit": {
+            "text2": [
+                "Leistungs-",
+                "maximum"
+            ],
+            "desc": "Maximal zulässige Leistungsaufnahme des Lötkolbens (W=Watt)"
+        },
+        "CalibrateCJC": {
+            "text2": [
+                "Temperatur",
+                "kalibrieren?"
+            ],
+            "desc": "Beim nächsten Start wird die Kaltstellenkompensation kalibriert (nicht nötig wenn Delta T < 5°C)"
+        },
+        "VoltageCalibration": {
+            "text2": [
+                "Eingangsspannung",
+                "kalibrieren?"
+            ],
+            "desc": "Kalibrierung der Eingangsspannung (Langer Tastendruck zum Verlassen)"
+        },
+        "PowerPulsePower": {
+            "text2": [
+                "Leistungs-",
+                "impuls"
+            ],
+            "desc": "Powerbank mit einem Impuls wach halten (Watt)"
+        },
+        "PowerPulseWait": {
+            "text2": [
+                "Impuls-",
+                "verzögerung"
+            ],
+            "desc": "Dauer vor Abgabe von Wachhalteimpulsen (x 2,5s)"
+        },
+        "PowerPulseDuration": {
+            "text2": [
+                "Impuls-",
+                "dauer"
+            ],
+            "desc": "Dauer des Wachhalteimpulses (x 250ms)"
+        },
+        "SettingsReset": {
+            "text2": [
+                "Einstellungen",
+                "zurücksetzen?"
+            ],
+            "desc": "Werte auf Werkseinstellungen zurücksetzen"
+        },
+        "LanguageSwitch": {
+            "text2": [
+                "Sprache:",
+                " DE     Deutsch"
+            ],
+            "desc": ""
+        }
+    }
+}

Translations/translation_EL.json

@@ -1,207 +1,344 @@
-{
-  "languageCode": "EL",
-  "languageLocalName": "Greek",
-  "fonts": ["ascii_basic", "greek"],
-  "tempUnitFahrenheit": true,
-  "messages": {
-    "SettingsCalibrationWarning": "Πριν προχωρήσετε, παρακαλώ σιγουρευτείτε πως η μύτη βρίσκεται σε θερμοκρασία δωματίου!",
-    "SettingsResetWarning": "Σίγουρα θέλετε επαναφορά αρχικών ρυθμίσεων;",
-    "UVLOWarningString": "Χαμηλ DC",
-    "UndervoltageString": "Υπόταση",
-    "InputVoltageString": "Είσοδος V: ",
-    "SleepingSimpleString": "Zzzz",
-    "SleepingAdvancedString": "Υπνος...",
-    "SleepingTipAdvancedString": "Μύτη:",
-    "OffString": "Απ."
-  },
-  "messagesWarn": {
-    "ResetOKMessage": "Επαν. OK",
-    "SettingsResetMessage": ["Κάποιες ρυθμ.", "άλλαξαν"],
-    "NoAccelerometerMessage": ["Δεν εντοπίστηκε", "επιταχυνσιόμετρο"],
-    "NoPowerDeliveryMessage": ["Δεν εντοπίστηκε", "κύκλωμα USB-PD"],
-    "LockingKeysString": "ΚΛΕΙΔ.",
-    "UnlockingKeysString": "ΞΕΚΛΕΙΔ.",
-    "WarningKeysLockedString": ["ΚΛΕΙΔΩΜΕΝΑ", "ΠΛΗΚΤΡΑ!"],
-    "WarningThermalRunaway": ["Θερμική", "Φυγή"]
-  },
-  "characters": {
-    "SettingRightChar": "R",
-    "SettingLeftChar": "L",
-    "SettingAutoChar": "Α",
-    "SettingOffChar": "0",
-    "SettingSlowChar": "Α",
-    "SettingMediumChar": "Μ",
-    "SettingFastChar": "Γ",
-    "SettingStartNoneChar": "0",
-    "SettingStartSolderingChar": "Κ",
-    "SettingStartSleepChar": "Ζ",
-    "SettingStartSleepOffChar": "Υ",
-    "SettingSensitivityOff": "0",
-    "SettingSensitivityLow": "Χ",
-    "SettingSensitivityMedium": "Μ",
-    "SettingSensitivityHigh": "Υ",
-    "SettingLockDisableChar": "Α",
-    "SettingLockBoostChar": "B",
-    "SettingLockFullChar": "Π"
-  },
-  "menuGroups": {
-    "PowerMenu": {
-      "text2": ["Ρυθμίσεις", "ενέργειας"],
-      "desc": "Ρυθμίσεις ενέργειας"
-    },
-    "SolderingMenu": {
-      "text2": ["Ρυθμίσεις", "κόλλησης"],
-      "desc": "Ρυθμίσεις κόλλησης"
-    },
-    "PowerSavingMenu": {
-      "text2": ["Λειτουργία", "ύπνου"],
-      "desc": "Ρυθμίσεις εξοικ. ενέργ."
-    },
-    "UIMenu": {
-      "text2": ["Διεπαφή", "χρήστη"],
-      "desc": "Ρυθμίσεις διεπαφής χρήστη"
-    },
-    "AdvancedMenu": {
-      "text2": ["Προηγμένες", "ρυθμίσεις"],
-      "desc": "Προηγμένες ρυθμίσεις"
-    }
-  },
-  "menuOptions": {
-    "DCInCutoff": {
-      "text2": ["Πηγή", "ενέργειας"],
-      "desc": "Πηγή ενέργειας. Oρισμός τάσης απενεργοποίησης. (DC 10V) (S 3.3V ανα κυψέλη, απενεργοποίηση ενεργειακού ορίου)"
-    },
-    "SleepTemperature": {
-      "text2": ["Θερμοκρ.", "ύπνου"],
-      "desc": "Θερμοκρασία μύτης σε λειτ. ύπνου"
-    },
-    "SleepTimeout": {
-      "text2": ["Έναρξη", "ύπνου"],
-      "desc": "Χρονικό διάστημα πρίν την ενεργοποίηση λειτουργίας ύπνου (Δ=δευτ. | Λ=λεπτά)"
-    },
-    "ShutdownTimeout": {
-      "text2": ["Έναρξη", "απενεργ."],
-      "desc": "Χρονικό διάστημα πρίν την απενεργοποίηση του κολλητηριού (Λ=λεπτά)"
-    },
-    "MotionSensitivity": {
-      "text2": ["Ευαισθησία", "κίνησης"],
-      "desc": "0=off | 1=λιγότερο ευαίσθητο | ... | 9=περισσότερο ευαίσθητο"
-    },
-    "TemperatureUnit": {
-      "text2": ["Μονάδες", "θερμοκρασίας"],
-      "desc": "C=Κελσίου | F=Φαρενάιτ"
-    },
-    "AdvancedIdle": {
-      "text2": ["Λεπτομερής", "οθ. αδράνειας"],
-      "desc": "Προβολή λεπτομερών πληροφοριών σε μικρότερη γραμματοσειρά στην οθόνη αδράνειας"
-    },
-    "DisplayRotation": {
-      "text2": ["Διάταξη", "οθόνης"],
-      "desc": "R=δεξιόχειρες | L=αριστερόχειρες | Α=αυτόματο"
-    },
-    "BoostTemperature": {
-      "text2": ["Θερμοκ.", "boost"],
-      "desc": "Θερμοκρασία στη \"λειτουργία boost\""
-    },
-    "AutoStart": {
-      "text2": ["Ζέσταμα", "κατά την εν."],
-      "desc": "0=off | Κ=θερμ. κόλλησης | Z=αναμονή σε θερμοκρασία ύπνου μέχρι την κίνηση | Υ=αναμονή χωρίς ζέσταμα μέχρι την κίνηση"
-    },
-    "CooldownBlink": {
-      "text2": ["Αναβοσβήσιμο", "ψύξης"],
-      "desc": "Αναβοσβήσιμο της ενδειξης θερμοκρασίας κατά την παύση θέρμανσης όταν η μύτη είναι ακόμα καυτή"
-    },
-    "TemperatureCalibration": {
-      "text2": ["Βαθμονόμηση", "θερμοκρασίας;"],
-      "desc": "Βαθμονόμηση αρχικής θερμοκρασίας μύτης"
-    },
-    "SettingsReset": {
-      "text2": ["Επαναφορά", "εργ. ρυθμίσεων;"],
-      "desc": "Επαναφορά στις προεπιλεγμένες ρυθμίσεις"
-    },
-    "VoltageCalibration": {
-      "text2": ["Βαθμονόμηση", "τάσης εισόδου;"],
-      "desc": "Έναρξη βαθμονόμησης τάσης εισόδου (κράτημα για έξοδο)"
-    },
-    "AdvancedSoldering": {
-      "text2": ["Λεπτομερής", "οθ. κόλλησης"],
-      "desc": "Προβολή λεπτομερών πληροφοριών σε μικρότερη γραμματοσειρά στην οθόνη κόλλησης"
-    },
-    "ScrollingSpeed": {
-      "text2": ["Ταχύτητα", "κύλισης"],
-      "desc": "Ταχύτητα κύλισης κειμένου (Α=αργά | Γ=γρήγορα)"
-    },
-    "QCMaxVoltage": {
-      "text2": ["Τάση", "QC"],
-      "desc": "Μέγιστη τάση QC που να ζητά το κολλητήρι από το τροφοδοτικό"
-    },
-    "PDNegTimeout": {
-      "text2": ["χρονικό όριο", "PD"],
-      "desc": "Χρονικό όριο διαπραγμάτευσης PD σε βήματα 100ms για συμβατότητα με κάποιους φορτιστές QC"
-    },
-    "PowerLimit": {
-      "text2": ["Ενεργειακό", "όριο"],
-      "desc": "Μέγιστη ενέργεια που μπορεί να χρησιμοποιεί το κολλητήρι (W=watt)"
-    },
-    "ReverseButtonTempChange": {
-      "text2": ["Αντιστροφή", "πλήκτρων + -"],
-      "desc": "Αντιστροφή διάταξης πλήκτρων στη ρύθμιση θερμοκρασίας"
-    },
-    "TempChangeShortStep": {
-      "text2": ["Αλλαγή θερμοκ.", "στιγμιαίο"],
-      "desc": "Βήμα αλλαγής θερμοκρασίας σε στιγμιαίο πάτημα πλήκτρου"
-    },
-    "TempChangeLongStep": {
-      "text2": ["Αλλαγή θερμοκ.", "παρατεταμένο"],
-      "desc": "Βήμα αλλαγής θερμοκρασίας σε παρατεταμένο πάτημα πλήκτρου"
-    },
-    "PowerPulsePower": {
-      "text2": ["Παλμός", "ενέργειας"],
-      "desc": "Ένταση ενέργειας παλμού διατήρησης λειτουργίας (watt)"
-    },
-    "HallEffSensitivity": {
-      "text2": ["Ευαισθ. αισθ. ", "φαιν. Hall"],
-      "desc": "Ευαισθησία του αισθητήρα φαινομένου Hall για εντοπισμό αδράνειας (0=off | 1=λιγότερο ευαίσθητο | ... | 9=περισσότερο ευαίσθητο)"
-    },
-    "LockingMode": {
-      "text2": ["Κλείδωμα", "πλήκτρων"],
-      "desc": "Κατά την κόλληση, κρατήστε και τα δύο πλήκτρα για κλείδωμα (A=απενεργοποίηση | B=μόνο λειτ. boost | Π=πλήρες κλείδωμα)"
-    },
-    "MinVolCell": {
-      "text2": ["Ελάχιστη", "τάση"],
-      "desc": "Ελάχιστη επιτρεπτή τάση ανα κυψέλη (3 σε σειρά: 3 - 3.7V | 4-6 σε σειρά: 2.4 - 3.7V)"
-    },
-    "AnimLoop": {
-      "text2": ["Επανάληψη", "κιν. εικονιδ."],
-      "desc": "Επανάληψη κίνησης εικονιδίων στο αρχικό μενού"
-    },
-    "AnimSpeed": {
-      "text2": ["Ταχύτητα", "κιν. εικονιδ."],
-      "desc": "Ρυθμός κίνησης εικονιδίων στο μενού (0=off | Α=αργός | Μ=μέτριος | Γ=γρήγορος"
-    },
-    "PowerPulseWait": {
-      "text2": ["Καθυστέρηση", "παλμού ενέργ."],
-      "desc": "Καθυστέρηση πριν την ενεργοποίση παλμού διατήρησης λειτουργίας (x 2.5s)"
-    },
-    "PowerPulseDuration": {
-      "text2": ["Διάρκεια", "παλμού ενέργ."],
-      "desc": "Διάρκεια παλμού διατήρησης ενέργειας (x 250ms)"
-    },
-    "LanguageSwitch": {
-      "text2": ["Γλώσσα", " GR Ελληνικά"],
-      "desc": "Τρέχουσα γλώσσα λογισμικού"
-    },
-    "Brightness": {
-      "text2": ["Αντίθεση", "οθόνης"],
-      "desc": "Ρύθμιση φωτεινότητας οθόνης OLED"
-    },
-    "ColourInversion": {
-      "text2": ["Αντιστροφή", "χρωμάτων"],
-      "desc": "Αντιστροφή χρωμάτων οθόνης OLED"
-    },
-    "LOGOTime": {
-      "text2": ["Boot logo", "duration"],
-      "desc": "Sets the duration for the boot logo (s=seconds)"
-    }
-  }
-}
+{
+    "languageCode": "EL",
+    "languageLocalName": "Greek",
+    "tempUnitFahrenheit": true,
+    "messages": {
+        "SettingsCalibrationWarning": "Before rebooting, make sure tip & handle are at room temperature!",
+        "CJCCalibrating": "calibrating",
+        "SettingsResetWarning": "Σίγουρα θέλετε επαναφορά αρχικών ρυθμίσεων;",
+        "UVLOWarningString": "Χαμηλ DC",
+        "UndervoltageString": "Υπόταση",
+        "InputVoltageString": "Είσοδος V: ",
+        "SleepingSimpleString": "Zzzz",
+        "SleepingAdvancedString": "Υπνος...",
+        "SleepingTipAdvancedString": "Μύτη:",
+        "OffString": "Απ.",
+        "DeviceFailedValidationWarning": "Your device is most likely a counterfeit!"
+    },
+    "messagesWarn": {
+        "CJCCalibrationDone": [
+            "Calibration",
+            "done!"
+        ],
+        "ResetOKMessage": "Επαν. OK",
+        "SettingsResetMessage": [
+            "Κάποιες ρυθμ.",
+            "άλλαξαν"
+        ],
+        "NoAccelerometerMessage": [
+            "Δεν εντοπίστηκε",
+            "επιταχυνσιόμετρο"
+        ],
+        "NoPowerDeliveryMessage": [
+            "Δεν εντοπίστηκε",
+            "κύκλωμα USB-PD"
+        ],
+        "LockingKeysString": "ΚΛΕΙΔ.",
+        "UnlockingKeysString": "ΞΕΚΛΕΙΔ.",
+        "WarningKeysLockedString": [
+            "ΚΛΕΙΔΩΜΕΝΑ",
+            "ΠΛΗΚΤΡΑ!"
+        ],
+        "WarningThermalRunaway": [
+            "Θερμική",
+            "Φυγή"
+        ]
+    },
+    "characters": {
+        "SettingRightChar": "R",
+        "SettingLeftChar": "L",
+        "SettingAutoChar": "Α",
+        "SettingOffChar": "0",
+        "SettingSlowChar": "Α",
+        "SettingMediumChar": "Μ",
+        "SettingFastChar": "Γ",
+        "SettingStartNoneChar": "0",
+        "SettingStartSolderingChar": "Κ",
+        "SettingStartSleepChar": "Ζ",
+        "SettingStartSleepOffChar": "Υ",
+        "SettingSensitivityOff": "0",
+        "SettingSensitivityLow": "Χ",
+        "SettingSensitivityMedium": "Μ",
+        "SettingSensitivityHigh": "Υ",
+        "SettingLockDisableChar": "Α",
+        "SettingLockBoostChar": "B",
+        "SettingLockFullChar": "Π"
+    },
+    "menuGroups": {
+        "PowerMenu": {
+            "text2": [
+                "Ρυθμίσεις",
+                "ενέργειας"
+            ],
+            "desc": ""
+        },
+        "SolderingMenu": {
+            "text2": [
+                "Ρυθμίσεις",
+                "κόλλησης"
+            ],
+            "desc": ""
+        },
+        "PowerSavingMenu": {
+            "text2": [
+                "Λειτουργία",
+                "ύπνου"
+            ],
+            "desc": ""
+        },
+        "UIMenu": {
+            "text2": [
+                "Διεπαφή",
+                "χρήστη"
+            ],
+            "desc": ""
+        },
+        "AdvancedMenu": {
+            "text2": [
+                "Προηγμένες",
+                "ρυθμίσεις"
+            ],
+            "desc": ""
+        }
+    },
+    "menuOptions": {
+        "DCInCutoff": {
+            "text2": [
+                "Πηγή",
+                "ενέργειας"
+            ],
+            "desc": "Πηγή ενέργειας. Oρισμός τάσης απενεργοποίησης. (DC 10V) (S 3.3V ανα κυψέλη, απενεργοποίηση ενεργειακού ορίου)"
+        },
+        "MinVolCell": {
+            "text2": [
+                "Ελάχιστη",
+                "τάση"
+            ],
+            "desc": "Ελάχιστη επιτρεπτή τάση ανα κυψέλη (3 σε σειρά: 3 - 3.7V | 4-6 σε σειρά: 2.4 - 3.7V)"
+        },
+        "QCMaxVoltage": {
+            "text2": [
+                "Τάση",
+                "QC"
+            ],
+            "desc": "Μέγιστη τάση QC που να ζητά το κολλητήρι από το τροφοδοτικό"
+        },
+        "PDNegTimeout": {
+            "text2": [
+                "χρονικό όριο",
+                "PD"
+            ],
+            "desc": "Χρονικό όριο διαπραγμάτευσης PD σε βήματα 100ms για συμβατότητα με κάποιους φορτιστές QC"
+        },
+        "BoostTemperature": {
+            "text2": [
+                "Θερμοκ.",
+                "boost"
+            ],
+            "desc": "Θερμοκρασία στη \"λειτουργία boost\""
+        },
+        "AutoStart": {
+            "text2": [
+                "Ζέσταμα",
+                "κατά την εν."
+            ],
+            "desc": "0=off | Κ=θερμ. κόλλησης | Z=αναμονή σε θερμοκρασία ύπνου μέχρι την κίνηση | Υ=αναμονή χωρίς ζέσταμα μέχρι την κίνηση"
+        },
+        "TempChangeShortStep": {
+            "text2": [
+                "Αλλαγή θερμοκ.",
+                "στιγμιαίο"
+            ],
+            "desc": "Βήμα αλλαγής θερμοκρασίας σε στιγμιαίο πάτημα πλήκτρου"
+        },
+        "TempChangeLongStep": {
+            "text2": [
+                "Αλλαγή θερμοκ.",
+                "παρατεταμένο"
+            ],
+            "desc": "Βήμα αλλαγής θερμοκρασίας σε παρατεταμένο πάτημα πλήκτρου"
+        },
+        "LockingMode": {
+            "text2": [
+                "Κλείδωμα",
+                "πλήκτρων"
+            ],
+            "desc": "Κατά την κόλληση, κρατήστε και τα δύο πλήκτρα για κλείδωμα (A=απενεργοποίηση | B=μόνο λειτ. boost | Π=πλήρες κλείδωμα)"
+        },
+        "MotionSensitivity": {
+            "text2": [
+                "Ευαισθησία",
+                "κίνησης"
+            ],
+            "desc": "0=off | 1=λιγότερο ευαίσθητο | ... | 9=περισσότερο ευαίσθητο"
+        },
+        "SleepTemperature": {
+            "text2": [
+                "Θερμοκρ.",
+                "ύπνου"
+            ],
+            "desc": "Θερμοκρασία μύτης σε λειτ. ύπνου"
+        },
+        "SleepTimeout": {
+            "text2": [
+                "Έναρξη",
+                "ύπνου"
+            ],
+            "desc": "Χρονικό διάστημα πρίν την ενεργοποίηση λειτουργίας ύπνου (Δ=δευτ. | Λ=λεπτά)"
+        },
+        "ShutdownTimeout": {
+            "text2": [
+                "Έναρξη",
+                "απενεργ."
+            ],
+            "desc": "Χρονικό διάστημα πρίν την απενεργοποίηση του κολλητηριού (Λ=λεπτά)"
+        },
+        "HallEffSensitivity": {
+            "text2": [
+                "Ευαισθ. αισθ. ",
+                "φαιν. Hall"
+            ],
+            "desc": "Ευαισθησία του αισθητήρα φαινομένου Hall για εντοπισμό αδράνειας (0=off | 1=λιγότερο ευαίσθητο | ... | 9=περισσότερο ευαίσθητο)"
+        },
+        "TemperatureUnit": {
+            "text2": [
+                "Μονάδες",
+                "θερμοκρασίας"
+            ],
+            "desc": "C=Κελσίου | F=Φαρενάιτ"
+        },
+        "DisplayRotation": {
+            "text2": [
+                "Διάταξη",
+                "οθόνης"
+            ],
+            "desc": "R=δεξιόχειρες | L=αριστερόχειρες | Α=αυτόματο"
+        },
+        "CooldownBlink": {
+            "text2": [
+                "Αναβοσβήσιμο",
+                "ψύξης"
+            ],
+            "desc": "Αναβοσβήσιμο της ενδειξης θερμοκρασίας κατά την παύση θέρμανσης όταν η μύτη είναι ακόμα καυτή"
+        },
+        "ScrollingSpeed": {
+            "text2": [
+                "Ταχύτητα",
+                "κύλισης"
+            ],
+            "desc": "Ταχύτητα κύλισης κειμένου (Α=αργά | Γ=γρήγορα)"
+        },
+        "ReverseButtonTempChange": {
+            "text2": [
+                "Αντιστροφή",
+                "πλήκτρων + -"
+            ],
+            "desc": "Αντιστροφή διάταξης πλήκτρων στη ρύθμιση θερμοκρασίας"
+        },
+        "AnimSpeed": {
+            "text2": [
+                "Ταχύτητα",
+                "κιν. εικονιδ."
+            ],
+            "desc": "Ρυθμός κίνησης εικονιδίων στο μενού (0=off | Α=αργός | Μ=μέτριος | Γ=γρήγορος)"
+        },
+        "AnimLoop": {
+            "text2": [
+                "Επανάληψη",
+                "κιν. εικονιδ."
+            ],
+            "desc": "Επανάληψη κίνησης εικονιδίων στο αρχικό μενού"
+        },
+        "Brightness": {
+            "text2": [
+                "Αντίθεση",
+                "οθόνης"
+            ],
+            "desc": "Ρύθμιση φωτεινότητας οθόνης OLED"
+        },
+        "ColourInversion": {
+            "text2": [
+                "Αντιστροφή",
+                "χρωμάτων"
+            ],
+            "desc": "Αντιστροφή χρωμάτων οθόνης OLED"
+        },
+        "LOGOTime": {
+            "text2": [
+                "Boot logo",
+                "duration"
+            ],
+            "desc": "Sets the duration for the boot logo (s=seconds)"
+        },
+        "AdvancedIdle": {
+            "text2": [
+                "Λεπτομερής",
+                "οθ. αδράνειας"
+            ],
+            "desc": "Προβολή λεπτομερών πληροφοριών σε μικρότερη γραμματοσειρά στην οθόνη αδράνειας"
+        },
+        "AdvancedSoldering": {
+            "text2": [
+                "Λεπτομερής",
+                "οθ. κόλλησης"
+            ],
+            "desc": "Προβολή λεπτομερών πληροφοριών σε μικρότερη γραμματοσειρά στην οθόνη κόλλησης"
+        },
+        "PowerLimit": {
+            "text2": [
+                "Ενεργειακό",
+                "όριο"
+            ],
+            "desc": "Μέγιστη ενέργεια που μπορεί να χρησιμοποιεί το κολλητήρι (W=watt)"
+        },
+        "CalibrateCJC": {
+            "text2": [
+                "Calibrate CJC",
+                "at next boot"
+            ],
+            "desc": "At next boot tip Cold Junction Compensation will be calibrated (not required if Delta T is < 5 C)"
+        },
+        "VoltageCalibration": {
+            "text2": [
+                "Βαθμονόμηση",
+                "τάσης εισόδου;"
+            ],
+            "desc": "Έναρξη βαθμονόμησης τάσης εισόδου (κράτημα για έξοδο)"
+        },
+        "PowerPulsePower": {
+            "text2": [
+                "Παλμός",
+                "ενέργειας"
+            ],
+            "desc": "Ένταση ενέργειας παλμού διατήρησης λειτουργίας (W=watt)"
+        },
+        "PowerPulseWait": {
+            "text2": [
+                "Καθυστέρηση",
+                "παλμού ενέργ."
+            ],
+            "desc": "Καθυστέρηση πριν την ενεργοποίση παλμού διατήρησης λειτουργίας (x 2.5s)"
+        },
+        "PowerPulseDuration": {
+            "text2": [
+                "Διάρκεια",
+                "παλμού ενέργ."
+            ],
+            "desc": "Διάρκεια παλμού διατήρησης ενέργειας (x 250ms)"
+        },
+        "SettingsReset": {
+            "text2": [
+                "Επαναφορά",
+                "εργ. ρυθμίσεων;"
+            ],
+            "desc": "Επαναφορά στις προεπιλεγμένες ρυθμίσεις"
+        },
+        "LanguageSwitch": {
+            "text2": [
+                "Γλώσσα:",
+                " GR    Ελληνικά"
+            ],
+            "desc": ""
+        }
+    }
+}

Translations/translation_EN.json

@@ -1,207 +1,341 @@
 {
-  "languageCode": "EN",
-  "languageLocalName": "English",
-  "fonts": ["ascii_basic"],
-  "tempUnitFahrenheit": true,
-  "messages": {
-    "SettingsCalibrationWarning": "Please ensure the tip is at room temperature, before proceeding!",
-    "SettingsResetWarning": "Are you sure you want to restore default settings?",
-    "UVLOWarningString": "DC LOW",
-    "UndervoltageString": "Undervoltage",
-    "InputVoltageString": "Input V: ",
-    "SleepingSimpleString": "Zzzz",
-    "SleepingAdvancedString": "Sleeping...",
-    "SleepingTipAdvancedString": "Tip:",
-    "OffString": "Off"
-  },
-  "messagesWarn": {
-    "ResetOKMessage": "Reset OK",
-    "SettingsResetMessage": ["Certain settings", "were changed!"],
-    "NoAccelerometerMessage": ["No accelerometer", "detected!"],
-    "NoPowerDeliveryMessage": ["No USB-PD IC", "detected!"],
-    "LockingKeysString": "LOCKED",
-    "UnlockingKeysString": "UNLOCKED",
-    "WarningKeysLockedString": "!LOCKED!",
-    "WarningThermalRunaway": ["Thermal", "Runaway"]
-  },
-  "characters": {
-    "SettingRightChar": "R",
-    "SettingLeftChar": "L",
-    "SettingAutoChar": "A",
-    "SettingOffChar": "O",
-    "SettingSlowChar": "S",
-    "SettingMediumChar": "M",
-    "SettingFastChar": "F",
-    "SettingStartNoneChar": "O",
-    "SettingStartSolderingChar": "S",
-    "SettingStartSleepChar": "Z",
-    "SettingStartSleepOffChar": "R",
-    "SettingSensitivityOff": "O",
-    "SettingSensitivityLow": "L",
-    "SettingSensitivityMedium": "M",
-    "SettingSensitivityHigh": "H",
-    "SettingLockDisableChar": "D",
-    "SettingLockBoostChar": "B",
-    "SettingLockFullChar": "F"
-  },
-  "menuGroups": {
-    "PowerMenu": {
-      "text2": ["Power", "settings"],
-      "desc": "Power settings"
+    "languageCode": "EN",
+    "languageLocalName": "English",
+    "tempUnitFahrenheit": true,
+    "messages": {
+        "SettingsCalibrationWarning": "Before rebooting, make sure tip & handle are at room temperature!",
+        "CJCCalibrating": "calibrating",
+        "SettingsResetWarning": "Are you sure you want to restore default settings?",
+        "UVLOWarningString": "DC LOW",
+        "UndervoltageString": "Undervoltage",
+        "InputVoltageString": "Input V: ",
+        "SleepingSimpleString": "Zzzz",
+        "SleepingAdvancedString": "Sleeping...",
+        "SleepingTipAdvancedString": "Tip:",
+        "OffString": "Off",
+        "DeviceFailedValidationWarning": "Your device is most likely a counterfeit!"
     },
-    "SolderingMenu": {
-      "text2": ["Soldering", "settings"],
-      "desc": "Soldering settings"
+    "messagesWarn": {
+        "CJCCalibrationDone": [
+            "Calibration",
+            "done!"
+        ],
+        "ResetOKMessage": "Reset OK",
+        "SettingsResetMessage": [
+            "Certain settings",
+            "changed!"
+        ],
+        "NoAccelerometerMessage": [
+            "No accelerometer",
+            "detected!"
+        ],
+        "NoPowerDeliveryMessage": [
+            "No USB-PD IC",
+            "detected!"
+        ],
+        "LockingKeysString": "LOCKED",
+        "UnlockingKeysString": "UNLOCKED",
+        "WarningKeysLockedString": "!LOCKED!",
+        "WarningThermalRunaway": [
+            "Thermal",
+            "Runaway"
+        ]
     },
-    "PowerSavingMenu": {
-      "text2": ["Sleep", "mode"],
-      "desc": "Power saving settings"
+    "characters": {
+        "SettingRightChar": "R",
+        "SettingLeftChar": "L",
+        "SettingAutoChar": "A",
+        "SettingOffChar": "O",
+        "SettingSlowChar": "S",
+        "SettingMediumChar": "M",
+        "SettingFastChar": "F",
+        "SettingStartNoneChar": "O",
+        "SettingStartSolderingChar": "S",
+        "SettingStartSleepChar": "Z",
+        "SettingStartSleepOffChar": "R",
+        "SettingSensitivityOff": "O",
+        "SettingSensitivityLow": "L",
+        "SettingSensitivityMedium": "M",
+        "SettingSensitivityHigh": "H",
+        "SettingLockDisableChar": "D",
+        "SettingLockBoostChar": "B",
+        "SettingLockFullChar": "F"
     },
-    "UIMenu": {
-      "text2": ["User", "interface"],
-      "desc": "User interface settings"
+    "menuGroups": {
+        "PowerMenu": {
+            "text2": [
+                "Power",
+                "settings"
+            ],
+            "desc": "Settings for Power Supply (Batteries, Quick Charge, PD etc)"
+        },
+        "SolderingMenu": {
+            "text2": [
+                "Soldering",
+                "settings"
+            ],
+            "desc": "Soldering settings, boost modes; how the iron operates"
+        },
+        "PowerSavingMenu": {
+            "text2": [
+                "Sleep",
+                "mode"
+            ],
+            "desc": "Sleep modes; methods we use to save power on the device by shutting down"
+        },
+        "UIMenu": {
+            "text2": [
+                "User",
+                "interface"
+            ],
+            "desc": "User interactions (how it looks, animations, units etc)"
+        },
+        "AdvancedMenu": {
+            "text2": [
+                "Advanced",
+                "settings"
+            ],
+            "desc": "Advanced or Misc options."
+        }
     },
-    "AdvancedMenu": {
-      "text2": ["Advanced", "settings"],
-      "desc": "Advanced settings"
+    "menuOptions": {
+        "DCInCutoff": {
+            "text2": [
+                "Power",
+                "source"
+            ],
+            "desc": "Set cutoff voltage to prevent battery overdrainage (DC 10V) (S=3.3V per cell, disable PWR limit)"
+        },
+        "MinVolCell": {
+            "text2": [
+                "Minimum",
+                "voltage"
+            ],
+            "desc": "Minimum allowed voltage per battery cell (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)"
+        },
+        "QCMaxVoltage": {
+            "text2": [
+                "QC",
+                "voltage"
+            ],
+            "desc": "Max QC voltage the iron should negotiate for"
+        },
+        "PDNegTimeout": {
+            "text2": [
+                "PD",
+                "timeout"
+            ],
+            "desc": "PD negotiation timeout in 100ms steps for compatibility with some QC chargers"
+        },
+        "BoostTemperature": {
+            "text2": [
+                "Boost",
+                "temp"
+            ],
+            "desc": "Tip temperature used in \"boost mode\""
+        },
+        "AutoStart": {
+            "text2": [
+                "Start-up",
+                "behavior"
+            ],
+            "desc": "O=off | S=heat to soldering temp | Z=standby at sleep temp until moved | R=standby without heating until moved"
+        },
+        "TempChangeShortStep": {
+            "text2": [
+                "Temp change",
+                "short"
+            ],
+            "desc": "Temperature-change-increment on short button press"
+        },
+        "TempChangeLongStep": {
+            "text2": [
+                "Temp change",
+                "long"
+            ],
+            "desc": "Temperature-change-increment on long button press"
+        },
+        "LockingMode": {
+            "text2": [
+                "Allow locking",
+                "buttons"
+            ],
+            "desc": "While soldering, hold down both buttons to toggle locking them (D=disable | B=boost mode only | F=full locking)"
+        },
+        "MotionSensitivity": {
+            "text2": [
+                "Motion",
+                "sensitivity"
+            ],
+            "desc": "0=off | 1=least sensitive | ... | 9=most sensitive"
+        },
+        "SleepTemperature": {
+            "text2": [
+                "Sleep",
+                "temp"
+            ],
+            "desc": "Tip temperature while in \"sleep mode\""
+        },
+        "SleepTimeout": {
+            "text2": [
+                "Sleep",
+                "timeout"
+            ],
+            "desc": "Interval before \"sleep mode\" starts (s=seconds | m=minutes)"
+        },
+        "ShutdownTimeout": {
+            "text2": [
+                "Shutdown",
+                "timeout"
+            ],
+            "desc": "Interval before the iron shuts down (m=minutes)"
+        },
+        "HallEffSensitivity": {
+            "text2": [
+                "Hall sensor",
+                "sensitivity"
+            ],
+            "desc": "Sensitivity to magnets (0=off | 1=least sensitive | ... | 9=most sensitive)"
+        },
+        "TemperatureUnit": {
+            "text2": [
+                "Temperature",
+                "unit"
+            ],
+            "desc": "C=°Celsius | F=°Fahrenheit"
+        },
+        "DisplayRotation": {
+            "text2": [
+                "Display",
+                "orientation"
+            ],
+            "desc": "R=right-handed | L=left-handed | A=automatic"
+        },
+        "CooldownBlink": {
+            "text2": [
+                "Cooldown",
+                "flashing"
+            ],
+            "desc": "Flash temp reading at idle while tip is hot"
+        },
+        "ScrollingSpeed": {
+            "text2": [
+                "Scrolling",
+                "speed"
+            ],
+            "desc": "Speed info text scrolls past at (S=slow | F=fast)"
+        },
+        "ReverseButtonTempChange": {
+            "text2": [
+                "Swap",
+                "+ - keys"
+            ],
+            "desc": "Reverse assignment of buttons for temperature adjustment"
+        },
+        "AnimSpeed": {
+            "text2": [
+                "Anim.",
+                "speed"
+            ],
+            "desc": "Pace of icon animations in menu (O=off | S=slow | M=medium | F=fast)"
+        },
+        "AnimLoop": {
+            "text2": [
+                "Anim.",
+                "loop"
+            ],
+            "desc": "Loop icon animations in main menu"
+        },
+        "Brightness": {
+            "text2": [
+                "Screen",
+                "brightness"
+            ],
+            "desc": "Adjust the OLED screen brightness"
+        },
+        "ColourInversion": {
+            "text2": [
+                "Invert",
+                "screen"
+            ],
+            "desc": "Invert the OLED screen colors"
+        },
+        "LOGOTime": {
+            "text2": [
+                "Boot logo",
+                "duration"
+            ],
+            "desc": "Set boot logo duration (s=seconds)"
+        },
+        "AdvancedIdle": {
+            "text2": [
+                "Detailed",
+                "idle screen"
+            ],
+            "desc": "Display detailed info in a smaller font on idle screen"
+        },
+        "AdvancedSoldering": {
+            "text2": [
+                "Detailed",
+                "solder screen"
+            ],
+            "desc": "Display detailed info in a smaller font on soldering screen"
+        },
+        "PowerLimit": {
+            "text2": [
+                "Power",
+                "limit"
+            ],
+            "desc": "Maximum power the iron can use (W=watt)"
+        },
+        "CalibrateCJC": {
+            "text2": [
+                "Calibrate CJC",
+                "at next boot"
+            ],
+            "desc": "At next boot tip Cold Junction Compensation will be calibrated (not required if Delta T is < 5°C)"
+        },
+        "VoltageCalibration": {
+            "text2": [
+                "Calibrate",
+                "input voltage"
+            ],
+            "desc": "Start VIN calibration (long press to exit)"
+        },
+        "PowerPulsePower": {
+            "text2": [
+                "Power",
+                "pulse"
+            ],
+            "desc": "Intensity of power of keep-awake-pulse (watt)"
+        },
+        "PowerPulseWait": {
+            "text2": [
+                "Power pulse",
+                "delay"
+            ],
+            "desc": "Delay before keep-awake-pulse is triggered (x 2.5s)"
+        },
+        "PowerPulseDuration": {
+            "text2": [
+                "Power pulse",
+                "duration"
+            ],
+            "desc": "Keep-awake-pulse duration (x 250ms)"
+        },
+        "SettingsReset": {
+            "text2": [
+                "Restore default",
+                "settings"
+            ],
+            "desc": "Reset all settings to default"
+        },
+        "LanguageSwitch": {
+            "text2": [
+                "Language:",
+                " EN     English"
+            ],
+            "desc": "Toggle active language"
+        }
     }
-  },
-  "menuOptions": {
-    "DCInCutoff": {
-      "text2": ["Power", "source"],
-      "desc": "Power source. Sets cutoff voltage. (DC 10V) (S 3.3V per cell, disable power limit)"
-    },
-    "SleepTemperature": {
-      "text2": ["Sleep", "temp"],
-      "desc": "Tip temperature while in \"sleep mode\""
-    },
-    "SleepTimeout": {
-      "text2": ["Sleep", "timeout"],
-      "desc": "Interval before \"sleep mode\" kicks in (s=seconds | m=minutes)"
-    },
-    "ShutdownTimeout": {
-      "text2": ["Shutdown", "timeout"],
-      "desc": "Interval before the iron shuts down (m=minutes)"
-    },
-    "MotionSensitivity": {
-      "text2": ["Motion", "sensitivity"],
-      "desc": "0=off | 1=least sensitive | ... | 9=most sensitive"
-    },
-    "TemperatureUnit": {
-      "text2": ["Temperature", "unit"],
-      "desc": "C=Celsius | F=Fahrenheit"
-    },
-    "AdvancedIdle": {
-      "text2": ["Detailed", "idle screen"],
-      "desc": "Display detailed information in a smaller font on the idle screen"
-    },
-    "DisplayRotation": {
-      "text2": ["Display", "orientation"],
-      "desc": "R=right-handed | L=left-handed | A=automatic"
-    },
-    "BoostTemperature": {
-      "text2": ["Boost", "temp"],
-      "desc": "Tip temperature used in \"boost mode\""
-    },
-    "AutoStart": {
-      "text2": ["Start-up", "behavior"],
-      "desc": "O=off | S=heat up to soldering temp | Z=standby at sleep temp until moved | R=standby without heating until moved"
-    },
-    "CooldownBlink": {
-      "text2": ["Cooldown", "flashing"],
-      "desc": "Flash the temperature reading after heating was halted while the tip is still hot"
-    },
-    "TemperatureCalibration": {
-      "text2": ["Calibrate", "temperature?"],
-      "desc": "Start tip temperature offset calibration"
-    },
-    "SettingsReset": {
-      "text2": ["Restore factory", "settings?"],
-      "desc": "Reset all settings to default"
-    },
-    "VoltageCalibration": {
-      "text2": ["Calibrate", "input voltage?"],
-      "desc": "Start VIN calibration (long press to exit)"
-    },
-    "AdvancedSoldering": {
-      "text2": ["Detailed", "solder screen"],
-      "desc": "Display detailed information in a smaller font on soldering screen"
-    },
-    "ScrollingSpeed": {
-      "text2": ["Scrolling", "speed"],
-      "desc": "Speed info text scrolls past at (S=slow | F=fast)"
-    },
-    "QCMaxVoltage": {
-      "text2": ["QC", "voltage"],
-      "desc": "Max QC voltage the iron should negotiate for"
-    },
-    "PDNegTimeout": {
-      "text2": ["PD", "timeout"],
-      "desc": "PD negotiation timeout in 100ms steps for compatibility with some QC chargers"
-    },
-    "PowerLimit": {
-      "text2": ["Power", "limit"],
-      "desc": "Maximum power the iron can use (W=watt)"
-    },
-    "ReverseButtonTempChange": {
-      "text2": ["Swap", "+ - keys"],
-      "desc": "Reverse assignment of buttons for temperature adjustment"
-    },
-    "TempChangeShortStep": {
-      "text2": ["Temp change", "short"],
-      "desc": "Temperature-change-increment on short button press"
-    },
-    "TempChangeLongStep": {
-      "text2": ["Temp change", "long"],
-      "desc": "Temperature-change-increment on long button press"
-    },
-    "PowerPulsePower": {
-      "text2": ["Power", "pulse"],
-      "desc": "Intensity of power of keep-awake-pulse (watt)"
-    },
-    "HallEffSensitivity": {
-      "text2": ["Hall sensor", "sensitivity"],
-      "desc": "Sensitivity of the Hall effect sensor to detect sleep (0=off | 1=least sensitive | ... | 9=most sensitive)"
-    },
-    "LockingMode": {
-      "text2": ["Allow locking", "buttons"],
-      "desc": "While soldering, hold down both buttons to toggle locking them (D=disable | B=boost mode only | F=full locking)"
-    },
-    "MinVolCell": {
-      "text2": ["Minimum", "voltage"],
-      "desc": "Minimum allowed voltage per cell (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)"
-    },
-    "AnimLoop": {
-      "text2": ["Anim.", "loop"],
-      "desc": "Loop icon animations in main menu"
-    },
-    "AnimSpeed": {
-      "text2": ["Anim.", "speed"],
-      "desc": "Pace of icon animations in menu (O=off | S=slow | M=medium | F=fast)"
-    },
-    "PowerPulseWait": {
-      "text2": ["Power pulse", "delay"],
-      "desc": "Delay before keep-awake-pulse is triggered (x 2.5s)"
-    },
-    "PowerPulseDuration": {
-      "text2": ["Power pulse", "duration"],
-      "desc": "Keep-awake-pulse duration (x 250ms)"
-    },
-    "LanguageSwitch": {
-      "text2": ["Language:", " EN     English"],
-      "desc": "Current firmware language"
-    },
-    "Brightness": {
-      "text2": ["Screen", "brightness"],
-      "desc": "Adjust the brightness of the OLED screen"
-    },
-    "ColourInversion": {
-      "text2": ["Invert", "screen"],
-      "desc": "Invert the colours of the OLED screen"
-    },
-    "LOGOTime": {
-      "text2": ["Boot logo", "duration"],
-      "desc": "Sets the duration for the boot logo (s=seconds)"
-    }
-  }
 }

Translations/translation_ES.json

@@ -1,207 +1,342 @@
-{
-  "languageCode": "ES",
-  "languageLocalName": "Castellano",
-  "fonts": ["ascii_basic", "latin_extended"],
-  "tempUnitFahrenheit": false,
-  "messages": {
-    "SettingsCalibrationWarning": "¡Asegúrate que la punta esté a temperatura ambiente antes de empezar!",
-    "SettingsResetWarning": "¿Quieres restablecer los ajustes?",
-    "UVLOWarningString": "CC BAJA",
-    "UndervoltageString": "Voltaje bajo",
-    "InputVoltageString": "Voltaje: ",
-    "SleepingSimpleString": "Zzzz",
-    "SleepingAdvancedString": "En reposo...",
-    "SleepingTipAdvancedString": "Punta:",
-    "OffString": " No"
-  },
-  "messagesWarn": {
-    "ResetOKMessage": "Hecho.",
-    "SettingsResetMessage": ["Los ajustes fueron", "¡Reinicio!"],
-    "NoAccelerometerMessage": ["Sin acelerómetro", "¡Detectado!"],
-    "NoPowerDeliveryMessage": ["Sin USB-PD IC", "¡Detectado!"],
-    "LockingKeysString": " BLOQUEADO",
-    "UnlockingKeysString": "DESBLOQUEADO",
-    "WarningKeysLockedString": "¡BLOQUEADO!",
-    "WarningThermalRunaway": ["Thermal", "Runaway"]
-  },
-  "characters": {
-    "SettingRightChar": "D",
-    "SettingLeftChar": "I",
-    "SettingAutoChar": "A",
-    "SettingOffChar": "O",
-    "SettingSlowChar": "L",
-    "SettingMediumChar": "M",
-    "SettingFastChar": "R",
-    "SettingStartNoneChar": "N",
-    "SettingStartSolderingChar": "S",
-    "SettingStartSleepChar": "R",
-    "SettingStartSleepOffChar": "F",
-    "SettingSensitivityOff": "O",
-    "SettingSensitivityLow": "L",
-    "SettingSensitivityMedium": "M",
-    "SettingSensitivityHigh": "H",
-    "SettingLockDisableChar": "D",
-    "SettingLockBoostChar": "B",
-    "SettingLockFullChar": "F"
-  },
-  "menuGroups": {
-    "PowerMenu": {
-      "text2": ["Potencia", "ajustes"],
-      "desc": "Ajustes de potencia"
-    },
-    "SolderingMenu": {
-      "text2": ["Ajustes de", "soldadura"],
-      "desc": "Ajustes para soldar."
-    },
-    "PowerSavingMenu": {
-      "text2": ["Modos de", "reposo"],
-      "desc": "Ajustes de ahorro energético."
-    },
-    "UIMenu": {
-      "text2": ["Interfaz", "de usuario"],
-      "desc": "Ajustes de interfaz de usuario."
-    },
-    "AdvancedMenu": {
-      "text2": ["Ajustes", "avanzados"],
-      "desc": "Ajustes avanzados."
-    }
-  },
-  "menuOptions": {
-    "DCInCutoff": {
-      "text2": ["Fuente", "de energía"],
-      "desc": "Elige el tipo de fuente para limitar el voltaje (DC 10V) (S 3,3V por pila, ilimitado)"
-    },
-    "SleepTemperature": {
-      "text2": ["Temperatura", "en reposo"],
-      "desc": "Temperatura de la punta en reposo."
-    },
-    "SleepTimeout": {
-      "text2": ["Entrar", "en reposo"],
-      "desc": "Tiempo de inactividad para entrar en reposo (min | seg)"
-    },
-    "ShutdownTimeout": {
-      "text2": ["Tiempo de", "apagado"],
-      "desc": "Tiempo de inactividad para apagarse (en minutos)"
-    },
-    "MotionSensitivity": {
-      "text2": ["Detección de", "movimiento"],
-      "desc": "Tiempo de reacción al agarrar (0=no | 1=menos sensible | ... | 9=más sensible)"
-    },
-    "TemperatureUnit": {
-      "text2": ["Unidad de", "temperatura"],
-      "desc": "Unidad de temperatura (C=centígrados | F=Fahrenheit)"
-    },
-    "AdvancedIdle": {
-      "text2": ["Info extra en", "modo reposo"],
-      "desc": "Muestra información detallada en letra pequeña al reposar."
-    },
-    "DisplayRotation": {
-      "text2": ["Orientación", "de pantalla"],
-      "desc": "Orientación de la pantalla (D=diestro | I=zurdo | A=automático)"
-    },
-    "BoostTemperature": {
-      "text2": ["Ajustar la", "temp. extra"],
-      "desc": "Temperatura momentánea que se alcanza al apretar el botón del modo extra."
-    },
-    "AutoStart": {
-      "text2": ["Calentar", "al enchufar"],
-      "desc": "Se calienta él solo al arrancar (N=no | S=entrar en modo soldar | R=solo entrar en reposo | F=en reposo pero mantiene la punta fría)"
-    },
-    "CooldownBlink": {
-      "text2": ["Parpadear", "al enfriar"],
-      "desc": "La temperatura en pantalla parpadea mientras la punta siga caliente."
-    },
-    "TemperatureCalibration": {
-      "text2": ["Calibrar temp.", "de la punta"],
-      "desc": "Calibra la desviación térmica de la punta."
-    },
-    "SettingsReset": {
-      "text2": ["Volver a ajustes", "de fábrica"],
-      "desc": "Restablece todos los ajustes a los valores originales."
-    },
-    "VoltageCalibration": {
-      "text2": ["Calibrar voltaje", "de entrada"],
-      "desc": "Calibra VIN. Ajusta con ambos botones y mantén pulsado para salir."
-    },
-    "AdvancedSoldering": {
-      "text2": ["Info extra", "al soldar"],
-      "desc": "Muestra más datos por pantalla cuando se está soldando."
-    },
-    "ScrollingSpeed": {
-      "text2": ["Velocidad", "del texto"],
-      "desc": "Velocidad de desplazamiento del texto (R=rápida | L=lenta)"
-    },
-    "QCMaxVoltage": {
-      "text2": ["Potencia de", "entrada"],
-      "desc": "Potencia en vatios del adaptador de corriente utilizado."
-    },
-    "PDNegTimeout": {
-      "text2": ["PD", "timeout"],
-      "desc": "PD negotiation timeout in 100ms steps for compatibility with some QC chargers (0: disabled)"
-    },
-    "PowerLimit": {
-      "text2": ["Ajustar la", "potenc. máx."],
-      "desc": "Elige el límite de potencia máxima del soldador (en vatios)"
-    },
-    "ReverseButtonTempChange": {
-      "text2": ["Invertir", "botones +/-"],
-      "desc": "Intercambia las funciones de subir y bajar la temperatura de los botones +/- para que funcionen al revés."
-    },
-    "TempChangeShortStep": {
-      "text2": ["Cambio temp.", "puls. cortas"],
-      "desc": "Subir y bajar X grados de temperatura con cada pulsación corta de los botones +/-."
-    },
-    "TempChangeLongStep": {
-      "text2": ["Cambio temp.", "puls. largas"],
-      "desc": "Subir y bajar X grados de temperatura con cada pulsación larga de los botones +/-."
-    },
-    "PowerPulsePower": {
-      "text2": ["Pulsos bat.", "constantes"],
-      "desc": "Aplica unos pulsos necesarios para mantener encendidas ciertas baterías portátiles. En vatios."
-    },
-    "HallEffSensitivity": {
-      "text2": ["Hall Eff", "Sensibilidad"],
-      "desc": "Sensibilidad del sensor de efecto Hall en la detección de reposo (0=no | 1=menos sensible | ... | 9=más sensible)"
-    },
-    "LockingMode": {
-      "text2": ["Permitir botones", "bloqueo"],
-      "desc": "Al soldar, una pulsación larga en ambos botones los bloquea (D=desactivar | B=sólo potenciar | F=bloqueo total)."
-    },
-    "MinVolCell": {
-      "text2": ["Mínimo", "voltaje"],
-      "desc": "voltaje mínimo permitido por célula (3S: 3 - 3,7V | 4-6S: 2,4 - 3,7V)"
-    },
-    "AnimLoop": {
-      "text2": ["Anim.", "bucle"],
-      "desc": "Animaciones de iconos en bucle en el menú raíz"
-    },
-    "AnimSpeed": {
-      "text2": ["Anim.", "velocidad"],
-      "desc": "Velocidad de las animaciones de los iconos en el menú (O=off | L=low | M=medium | R=high)"
-    },
-    "PowerPulseWait": {
-      "text2": ["Impulso de potencia", "tiempo de espera"],
-      "desc": "Tiempo de espera antes de disparar cada pulso de mantenimiento de la vigilia (x 2,5s)"
-    },
-    "PowerPulseDuration": {
-      "text2": ["Impulso de potencia", "duración"],
-      "desc": "Duración del impulso de mantenimiento de la vigilia (x 250ms)"
-    },
-    "LanguageSwitch": {
-      "text2": ["Language:", " ES  Castellano"],
-      "desc": ""
-    },
-    "Brightness": {
-      "text2": ["Screen", "brightness"],
-      "desc": "Adjust the brightness of the OLED screen"
-    },
-    "ColourInversion": {
-      "text2": ["Invert", "screen"],
-      "desc": "Invert the colours of the OLED screen"
-    },
-    "LOGOTime": {
-      "text2": ["Boot logo", "duration"],
-      "desc": "Sets the duration for the boot logo (s=seconds)"
-    }
-  }
-}
+{
+    "languageCode": "ES",
+    "languageLocalName": "Castellano",
+    "tempUnitFahrenheit": false,
+    "messages": {
+        "SettingsCalibrationWarning": "Before rebooting, make sure tip & handle are at room temperature!",
+        "CJCCalibrating": "calibrating",
+        "SettingsResetWarning": "¿Quieres restablecer los ajustes?",
+        "UVLOWarningString": "CC BAJA",
+        "UndervoltageString": "Voltaje bajo",
+        "InputVoltageString": "Voltaje: ",
+        "SleepingSimpleString": "Zzzz",
+        "SleepingAdvancedString": "En reposo...",
+        "SleepingTipAdvancedString": "Punta:",
+        "OffString": " No",
+        "DeviceFailedValidationWarning": "Your device is most likely a counterfeit!"
+    },
+    "messagesWarn": {
+        "CJCCalibrationDone": [
+            "Calibration",
+            "done!"
+        ],
+        "ResetOKMessage": "Hecho.",
+        "SettingsResetMessage": [
+            "Ajustes",
+            "¡Reiniciados!"
+        ],
+        "NoAccelerometerMessage": [
+            "Sin acelerómetro",
+            "¡Detectado!"
+        ],
+        "NoPowerDeliveryMessage": [
+            "Sin USB-PD IC",
+            "¡Detectado!"
+        ],
+        "LockingKeysString": " BLOQUEADO",
+        "UnlockingKeysString": "DESBLOQUEADO",
+        "WarningKeysLockedString": "¡BLOQUEADO!",
+        "WarningThermalRunaway": [
+            "Thermal",
+            "Runaway"
+        ]
+    },
+    "characters": {
+        "SettingRightChar": "D",
+        "SettingLeftChar": "I",
+        "SettingAutoChar": "A",
+        "SettingOffChar": "O",
+        "SettingSlowChar": "L",
+        "SettingMediumChar": "M",
+        "SettingFastChar": "R",
+        "SettingStartNoneChar": "N",
+        "SettingStartSolderingChar": "S",
+        "SettingStartSleepChar": "R",
+        "SettingStartSleepOffChar": "F",
+        "SettingSensitivityOff": "O",
+        "SettingSensitivityLow": "L",
+        "SettingSensitivityMedium": "M",
+        "SettingSensitivityHigh": "H",
+        "SettingLockDisableChar": "D",
+        "SettingLockBoostChar": "B",
+        "SettingLockFullChar": "F"
+    },
+    "menuGroups": {
+        "PowerMenu": {
+            "text2": [
+                "Potencia",
+                "ajustes"
+            ],
+            "desc": ""
+        },
+        "SolderingMenu": {
+            "text2": [
+                "Soldadura",
+                "ajustes"
+            ],
+            "desc": ""
+        },
+        "PowerSavingMenu": {
+            "text2": [
+                "Modos de",
+                "reposo"
+            ],
+            "desc": ""
+        },
+        "UIMenu": {
+            "text2": [
+                "Interfaz",
+                "de usuario"
+            ],
+            "desc": ""
+        },
+        "AdvancedMenu": {
+            "text2": [
+                "Ajustes",
+                "avanzados"
+            ],
+            "desc": ""
+        }
+    },
+    "menuOptions": {
+        "DCInCutoff": {
+            "text2": [
+                "Fuente",
+                "de energía"
+            ],
+            "desc": "Elige el tipo de fuente para limitar el voltaje (DC 10V) (S 3,3V por pila, ilimitado)"
+        },
+        "MinVolCell": {
+            "text2": [
+                "Mínimo",
+                "voltaje"
+            ],
+            "desc": "voltaje mínimo permitido por célula (3S: 3 - 3,7V | 4-6S: 2,4 - 3,7V)"
+        },
+        "QCMaxVoltage": {
+            "text2": [
+                "Potencia de",
+                "entrada"
+            ],
+            "desc": "Potencia en vatios del adaptador de corriente utilizado."
+        },
+        "PDNegTimeout": {
+            "text2": [
+                "PD",
+                "timeout"
+            ],
+            "desc": "PD negotiation timeout in 100ms steps for compatibility with some QC chargers (0: disabled)"
+        },
+        "BoostTemperature": {
+            "text2": [
+                "Ajustar la",
+                "temp. extra"
+            ],
+            "desc": "Temperatura momentánea que se alcanza al apretar el botón del modo extra."
+        },
+        "AutoStart": {
+            "text2": [
+                "Calentar",
+                "al enchufar"
+            ],
+            "desc": "Se calienta él solo al arrancar (N=no | S=entrar en modo soldar | R=solo entrar en reposo | F=en reposo pero mantiene la punta fría)"
+        },
+        "TempChangeShortStep": {
+            "text2": [
+                "Cambio temp.",
+                "puls. cortas"
+            ],
+            "desc": "Subir y bajar X grados de temperatura con cada pulsación corta de los botones +/-."
+        },
+        "TempChangeLongStep": {
+            "text2": [
+                "Cambio temp.",
+                "puls. largas"
+            ],
+            "desc": "Subir y bajar X grados de temperatura con cada pulsación larga de los botones +/-."
+        },
+        "LockingMode": {
+            "text2": [
+                "Permitir botones",
+                "bloqueo"
+            ],
+            "desc": "Al soldar, una pulsación larga en ambos botones los bloquea (D=desactivar | B=sólo potenciar | F=bloqueo total)."
+        },
+        "MotionSensitivity": {
+            "text2": [
+                "Detección de",
+                "movimiento"
+            ],
+            "desc": "Tiempo de reacción al agarrar (0=no | 1=menos sensible | ... | 9=más sensible)"
+        },
+        "SleepTemperature": {
+            "text2": [
+                "Temperatura",
+                "en reposo"
+            ],
+            "desc": "Temperatura de la punta en reposo."
+        },
+        "SleepTimeout": {
+            "text2": [
+                "Entrar",
+                "en reposo"
+            ],
+            "desc": "Tiempo de inactividad para entrar en reposo (min | seg)"
+        },
+        "ShutdownTimeout": {
+            "text2": [
+                "Tiempo de",
+                "apagado"
+            ],
+            "desc": "Tiempo de inactividad para apagarse (en minutos)"
+        },
+        "HallEffSensitivity": {
+            "text2": [
+                "Hall Eff",
+                "Sensibilidad"
+            ],
+            "desc": "Sensibilidad del sensor de efecto Hall en la detección de reposo (0=no | 1=menos sensible | ... | 9=más sensible)"
+        },
+        "TemperatureUnit": {
+            "text2": [
+                "Unidad de",
+                "temperatura"
+            ],
+            "desc": "Unidad de temperatura (C=centígrados | F=Fahrenheit)"
+        },
+        "DisplayRotation": {
+            "text2": [
+                "Orientación",
+                "de pantalla"
+            ],
+            "desc": "Orientación de la pantalla (D=diestro | I=zurdo | A=automático)"
+        },
+        "CooldownBlink": {
+            "text2": [
+                "Parpadear",
+                "al enfriar"
+            ],
+            "desc": "La temperatura en pantalla parpadea mientras la punta siga caliente."
+        },
+        "ScrollingSpeed": {
+            "text2": [
+                "Velocidad",
+                "del texto"
+            ],
+            "desc": "Velocidad de desplazamiento del texto (R=rápida | L=lenta)"
+        },
+        "ReverseButtonTempChange": {
+            "text2": [
+                "Invertir",
+                "botones +/-"
+            ],
+            "desc": "Intercambia las funciones de subir y bajar la temperatura de los botones +/- para que funcionen al revés."
+        },
+        "AnimSpeed": {
+            "text2": [
+                "Anim.",
+                "velocidad"
+            ],
+            "desc": "Velocidad de las animaciones de los iconos en el menú (O=off | L=low | M=medium | R=high)"
+        },
+        "AnimLoop": {
+            "text2": [
+                "Anim.",
+                "bucle"
+            ],
+            "desc": "Animaciones de iconos en bucle en el menú raíz"
+        },
+        "Brightness": {
+            "text2": [
+                "Pantalla",
+                "brillo"
+            ],
+            "desc": "Ajusta el brillo de la pantalla OLED"
+        },
+        "ColourInversion": {
+            "text2": [
+                "Invertir",
+                "pantalla"
+            ],
+            "desc": "Invertir la pantalla OLED"
+        },
+        "LOGOTime": {
+            "text2": [
+                "logo inicial",
+                "duración"
+            ],
+            "desc": "Duración de la animación del logo inicial (s=segundos)"
+        },
+        "AdvancedIdle": {
+            "text2": [
+                "Info extra en",
+                "modo reposo"
+            ],
+            "desc": "Muestra información detallada en letra pequeña al reposar."
+        },
+        "AdvancedSoldering": {
+            "text2": [
+                "Info extra",
+                "al soldar"
+            ],
+            "desc": "Muestra más datos por pantalla cuando se está soldando."
+        },
+        "PowerLimit": {
+            "text2": [
+                "Ajustar la",
+                "potenc. máx."
+            ],
+            "desc": "Elige el límite de potencia máxima del soldador (en vatios)"
+        },
+        "CalibrateCJC": {
+            "text2": [
+                "Calibrar CJC",
+
+                "en el próximo inicio"
+            ],
+            "desc": "At next boot tip Cold Junction Compensation will be calibrated (not required if Delta T is < 5°C)"
+        },
+        "VoltageCalibration": {
+            "text2": [
+                "Calibrar voltaje",
+                "de entrada"
+            ],
+            "desc": "Calibra VIN. Ajusta con ambos botones y mantén pulsado para salir."
+        },
+        "PowerPulsePower": {
+            "text2": [
+                "Pulsos bat.",
+                "constantes"
+            ],
+            "desc": "Aplica unos pulsos necesarios para mantener encendidas ciertas baterías portátiles. En vatios."
+        },
+        "PowerPulseWait": {
+            "text2": [
+                "Impulso de potencia",
+                "tiempo de espera"
+            ],
+            "desc": "Tiempo de espera antes de disparar cada pulso de mantenimiento de la vigilia (x 2,5s)"
+        },
+        "PowerPulseDuration": {
+            "text2": [
+                "Impulso de potencia",
+                "duración"
+            ],
+            "desc": "Duración del impulso de mantenimiento de la vigilia (x 250ms)"
+        },
+        "SettingsReset": {
+            "text2": [
+                "Volver a ajustes",
+                "de fábrica"
+            ],
+            "desc": "Restablece todos los ajustes a los valores originales."
+        },
+        "LanguageSwitch": {
+            "text2": [
+                "Idioma:",
+                " ES  Castellano"
+            ],
+            "desc": ""
+        }
+    }
+}

Translations/translation_FI.json

@@ -1,207 +1,341 @@
-{
-  "languageCode": "FI",
-  "languageLocalName": "Suomi",
-  "fonts": ["ascii_basic", "latin_extended"],
-  "tempUnitFahrenheit": false,
-  "messages": {
-    "SettingsCalibrationWarning": "Varmista että kärki on huoneenlämpöinen ennen jatkamista!",
-    "SettingsResetWarning": "Haluatko varmasti palauttaa oletusarvot?",
-    "UVLOWarningString": "DC ALH.",
-    "UndervoltageString": "Alijännite",
-    "InputVoltageString": "Jännite: ",
-    "SleepingSimpleString": "Zzzz",
-    "SleepingAdvancedString": "Lepotila...",
-    "SleepingTipAdvancedString": "Kärki:",
-    "OffString": "Off"
-  },
-  "messagesWarn": {
-    "ResetOKMessage": "Palautus",
-    "SettingsResetMessage": ["Asetukset", "palautettu!"],
-    "NoAccelerometerMessage": ["Kiihtyvyysanturi", "puuttuu!"],
-    "NoPowerDeliveryMessage": ["USB-PD IC", "puuttuu!"],
-    "LockingKeysString": " LUKITTU",
-    "UnlockingKeysString": "AUKI",
-    "WarningKeysLockedString": "!LUKKO!",
-    "WarningThermalRunaway": ["Thermal", "Runaway"]
-  },
-  "characters": {
-    "SettingRightChar": "O",
-    "SettingLeftChar": "V",
-    "SettingAutoChar": "A",
-    "SettingOffChar": "P",
-    "SettingSlowChar": "A",
-    "SettingMediumChar": "M",
-    "SettingFastChar": "S",
-    "SettingStartNoneChar": "E",
-    "SettingStartSolderingChar": "J",
-    "SettingStartSleepChar": "L",
-    "SettingStartSleepOffChar": "H",
-    "SettingSensitivityOff": "P",
-    "SettingSensitivityLow": "A",
-    "SettingSensitivityMedium": "K",
-    "SettingSensitivityHigh": "S",
-    "SettingLockDisableChar": "P",
-    "SettingLockBoostChar": "V",
-    "SettingLockFullChar": "K"
-  },
-  "menuGroups": {
-    "PowerMenu": {
-      "text2": ["Virta-", "asetukset"],
-      "desc": "Virta-asetukset"
-    },
-    "SolderingMenu": {
-      "text2": ["Juotos-", "asetukset"],
-      "desc": "Juotosasetukset"
-    },
-    "PowerSavingMenu": {
-      "text2": ["Lepotilan", "asetukset"],
-      "desc": "Virransäästöasetukset"
-    },
-    "UIMenu": {
-      "text2": ["Käyttö-", "liittymä"],
-      "desc": "Käyttöliittymän asetukset"
-    },
-    "AdvancedMenu": {
-      "text2": ["Lisä-", "asetukset"],
-      "desc": "Lisäasetukset"
-    }
-  },
-  "menuOptions": {
-    "DCInCutoff": {
-      "text2": ["Virtalähde", "DC"],
-      "desc": "Virtalähde. Asettaa katkaisujännitteen. (DC 10V) (S 3.3V per kenno, poistaa virtarajoitukset)"
-    },
-    "SleepTemperature": {
-      "text2": ["Lepotilan", "lämpötila"],
-      "desc": "Kärjen lämpötila \"lepotilassa\""
-    },
-    "SleepTimeout": {
-      "text2": ["Lepotilan", "viive"],
-      "desc": "\"Lepotilan\" ajastus (s=sekuntia | m=minuuttia)"
-    },
-    "ShutdownTimeout": {
-      "text2": ["Sammutus", "viive"],
-      "desc": "Automaattisen sammutuksen ajastus (m=minuuttia)"
-    },
-    "MotionSensitivity": {
-      "text2": ["Liikkeen", "herkkyys"],
-      "desc": "0=pois päältä | 1=vähäinen herkkyys | ... | 9=suurin herkkyys"
-    },
-    "TemperatureUnit": {
-      "text2": ["Lämpötilan", "yksikkö"],
-      "desc": "C=celsius, F=fahrenheit"
-    },
-    "AdvancedIdle": {
-      "text2": ["Tiedot", "lepotilassa"],
-      "desc": "Näyttää yksityiskohtaisemmat pienemmällä fontilla tiedot lepotilassa."
-    },
-    "DisplayRotation": {
-      "text2": ["Näytön", "kierto"],
-      "desc": "O=oikeakätinen | V=vasenkätinen | A=automaattinen"
-    },
-    "BoostTemperature": {
-      "text2": ["Tehostus-", "lämpötila"],
-      "desc": "Tehostustilan lämpötila"
-    },
-    "AutoStart": {
-      "text2": ["Autom.", "käynnistys"],
-      "desc": "Käynnistää virrat kytkettäessä juotostilan automaattisesti. (E=Ei käytössä | J=juotostila | L=Lepotila | H=Lepotila huoneenlämpö)"
-    },
-    "CooldownBlink": {
-      "text2": ["Jäähdytyksen", "vilkutus"],
-      "desc": "Vilkuttaa jäähtyessä juotoskärjen lämpötilaa sen ollessa vielä vaarallisen kuuma"
-    },
-    "TemperatureCalibration": {
-      "text2": ["Kalibroi", "lämpötila?"],
-      "desc": "Kalibroi kärjen lämpötilaeron"
-    },
-    "SettingsReset": {
-      "text2": ["Palauta", "tehdasasetukset?"],
-      "desc": "Palauta kaikki asetukset oletusarvoihin"
-    },
-    "VoltageCalibration": {
-      "text2": ["Kalibroi", "tulojännite?"],
-      "desc": "Tulojännitten kalibrointi (VIN) (paina pitkään poistuaksesi)"
-    },
-    "AdvancedSoldering": {
-      "text2": ["Tarkempi", "juotosnäyttö"],
-      "desc": "Näyttää yksityiskohtaisemmat tiedot pienellä fontilla juotostilassa"
-    },
-    "ScrollingSpeed": {
-      "text2": ["Selityksien", "nopeus"],
-      "desc": "Selityksien vieritysnopeus (H=hidas | N=nopea)"
-    },
-    "QCMaxVoltage": {
-      "text2": ["QC", "jännite"],
-      "desc": "Ensisijainen maksimi QC jännite"
-    },
-    "PDNegTimeout": {
-      "text2": ["PD", "timeout"],
-      "desc": "PD negotiation timeout in 100ms steps for compatibility with some QC chargers (0: disabled)"
-    },
-    "PowerLimit": {
-      "text2": ["Tehon-", "rajoitus"],
-      "desc": "Suurin sallittu teho (Watti)"
-    },
-    "ReverseButtonTempChange": {
-      "text2": ["Suunnanvaihto", "+ - näppäimille"],
-      "desc": "Lämpötilapainikkeiden suunnan vaihtaminen"
-    },
-    "TempChangeShortStep": {
-      "text2": ["Lämmön muutos", "lyhyt painal."],
-      "desc": "Lämpötilan muutos lyhyellä painalluksella"
-    },
-    "TempChangeLongStep": {
-      "text2": ["Lämmön muutos", "pitkä painal."],
-      "desc": "Lämpötilan muutos pitkällä painalluksella"
-    },
-    "PowerPulsePower": {
-      "text2": ["Herätyspulssin", "voimakkuus"],
-      "desc": "Herätyspulssin voimakkuus (watti)"
-    },
-    "HallEffSensitivity": {
-      "text2": ["Hall-", "herk."],
-      "desc": "Hall-efektianturin herkkyys lepotilan tunnistuksessa (0=pois päältä | 1=vähäinen herkkyys | ... | 9=suurin herkkyys)"
-    },
-    "LockingMode": {
-      "text2": ["Salli nappien", "lukitus"],
-      "desc": "Kolvatessa paina molempia näppäimiä lukitaksesi ne (P=pois | V=vain tehostus | K=kaikki)"
-    },
-    "MinVolCell": {
-      "text2": ["Pienin", "jännite"],
-      "desc": "Pienin sallittu jännite per kenno (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)"
-    },
-    "AnimLoop": {
-      "text2": ["Animaation", "toistaminen"],
-      "desc": "Toista animaatiot valikossa"
-    },
-    "AnimSpeed": {
-      "text2": ["Animaation", "nopeus"],
-      "desc": "Animaatioiden nopeus valikossa (P=pois | A=alhainen | K=keskiverto | S=suuri)"
-    },
-    "PowerPulseWait": {
-      "text2": ["Pulssin", "odotusaika"],
-      "desc": "Odotusaika herätyspulssin lähetykseen (x 2.5s)"
-    },
-    "PowerPulseDuration": {
-      "text2": ["Pulssin", "kesto"],
-      "desc": "Herätyspulssin kesto (x 250ms)"
-    },
-    "LanguageSwitch": {
-      "text2": ["Kieli:", " FI       Suomi"],
-      "desc": ""
-    },
-    "Brightness": {
-      "text2": ["Screen", "brightness"],
-      "desc": "Adjust the brightness of the OLED screen"
-    },
-    "ColourInversion": {
-      "text2": ["Invert", "screen"],
-      "desc": "Invert the colours of the OLED screen"
-    },
-    "LOGOTime": {
-      "text2": ["Boot logo", "duration"],
-      "desc": "Sets the duration for the boot logo (s=seconds)"
-    }
-  }
-}
+{
+    "languageCode": "FI",
+    "languageLocalName": "Suomi",
+    "tempUnitFahrenheit": false,
+    "messages": {
+        "SettingsCalibrationWarning": "Before rebooting, make sure tip & handle are at room temperature!",
+        "CJCCalibrating": "calibrating",
+        "SettingsResetWarning": "Haluatko varmasti palauttaa oletusarvot?",
+        "UVLOWarningString": "DC ALH.",
+        "UndervoltageString": "Alijännite",
+        "InputVoltageString": "Jännite: ",
+        "SleepingSimpleString": "Zzzz",
+        "SleepingAdvancedString": "Lepotila...",
+        "SleepingTipAdvancedString": "Kärki:",
+        "OffString": "Off",
+        "DeviceFailedValidationWarning": "Your device is most likely a counterfeit!"
+    },
+    "messagesWarn": {
+        "CJCCalibrationDone": [
+            "Calibration",
+            "done!"
+        ],
+        "ResetOKMessage": "Palautus",
+        "SettingsResetMessage": [
+            "Asetukset",
+            "palautettu!"
+        ],
+        "NoAccelerometerMessage": [
+            "Kiihtyvyysanturi",
+            "puuttuu!"
+        ],
+        "NoPowerDeliveryMessage": [
+            "USB-PD IC",
+            "puuttuu!"
+        ],
+        "LockingKeysString": " LUKITTU",
+        "UnlockingKeysString": "AUKI",
+        "WarningKeysLockedString": "!LUKKO!",
+        "WarningThermalRunaway": [
+            "Thermal",
+            "Runaway"
+        ]
+    },
+    "characters": {
+        "SettingRightChar": "O",
+        "SettingLeftChar": "V",
+        "SettingAutoChar": "A",
+        "SettingOffChar": "P",
+        "SettingSlowChar": "A",
+        "SettingMediumChar": "M",
+        "SettingFastChar": "S",
+        "SettingStartNoneChar": "E",
+        "SettingStartSolderingChar": "J",
+        "SettingStartSleepChar": "L",
+        "SettingStartSleepOffChar": "H",
+        "SettingSensitivityOff": "P",
+        "SettingSensitivityLow": "A",
+        "SettingSensitivityMedium": "K",
+        "SettingSensitivityHigh": "S",
+        "SettingLockDisableChar": "P",
+        "SettingLockBoostChar": "V",
+        "SettingLockFullChar": "K"
+    },
+    "menuGroups": {
+        "PowerMenu": {
+            "text2": [
+                "Virta-",
+                "asetukset"
+            ],
+            "desc": ""
+        },
+        "SolderingMenu": {
+            "text2": [
+                "Juotos-",
+                "asetukset"
+            ],
+            "desc": ""
+        },
+        "PowerSavingMenu": {
+            "text2": [
+                "Lepotilan",
+                "asetukset"
+            ],
+            "desc": ""
+        },
+        "UIMenu": {
+            "text2": [
+                "Käyttö-",
+                "liittymä"
+            ],
+            "desc": ""
+        },
+        "AdvancedMenu": {
+            "text2": [
+                "Lisä-",
+                "asetukset"
+            ],
+            "desc": ""
+        }
+    },
+    "menuOptions": {
+        "DCInCutoff": {
+            "text2": [
+                "Virtalähde",
+                "DC"
+            ],
+            "desc": "Virtalähde. Asettaa katkaisujännitteen. (DC 10V) (S 3.3V per kenno, poistaa virtarajoitukset)"
+        },
+        "MinVolCell": {
+            "text2": [
+                "Pienin",
+                "jännite"
+            ],
+            "desc": "Pienin sallittu jännite per kenno (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)"
+        },
+        "QCMaxVoltage": {
+            "text2": [
+                "QC",
+                "jännite"
+            ],
+            "desc": "Ensisijainen maksimi QC jännite"
+        },
+        "PDNegTimeout": {
+            "text2": [
+                "PD",
+                "timeout"
+            ],
+            "desc": "PD negotiation timeout in 100ms steps for compatibility with some QC chargers"
+        },
+        "BoostTemperature": {
+            "text2": [
+                "Tehostus-",
+                "lämpötila"
+            ],
+            "desc": "Tehostustilan lämpötila"
+        },
+        "AutoStart": {
+            "text2": [
+                "Autom.",
+                "käynnistys"
+            ],
+            "desc": "Käynnistää virrat kytkettäessä juotostilan automaattisesti. (E=Ei käytössä | J=juotostila | L=Lepotila | H=Lepotila huoneenlämpö)"
+        },
+        "TempChangeShortStep": {
+            "text2": [
+                "Lämmön muutos",
+                "lyhyt painal."
+            ],
+            "desc": "Lämpötilan muutos lyhyellä painalluksella"
+        },
+        "TempChangeLongStep": {
+            "text2": [
+                "Lämmön muutos",
+                "pitkä painal."
+            ],
+            "desc": "Lämpötilan muutos pitkällä painalluksella"
+        },
+        "LockingMode": {
+            "text2": [
+                "Salli nappien",
+                "lukitus"
+            ],
+            "desc": "Kolvatessa paina molempia näppäimiä lukitaksesi ne (P=pois | V=vain tehostus | K=kaikki)"
+        },
+        "MotionSensitivity": {
+            "text2": [
+                "Liikkeen",
+                "herkkyys"
+            ],
+            "desc": "0=pois päältä | 1=vähäinen herkkyys | ... | 9=suurin herkkyys"
+        },
+        "SleepTemperature": {
+            "text2": [
+                "Lepotilan",
+                "lämpötila"
+            ],
+            "desc": "Kärjen lämpötila \"lepotilassa\""
+        },
+        "SleepTimeout": {
+            "text2": [
+                "Lepotilan",
+                "viive"
+            ],
+            "desc": "\"Lepotilan\" ajastus (s=sekuntia | m=minuuttia)"
+        },
+        "ShutdownTimeout": {
+            "text2": [
+                "Sammutus",
+                "viive"
+            ],
+            "desc": "Automaattisen sammutuksen ajastus (m=minuuttia)"
+        },
+        "HallEffSensitivity": {
+            "text2": [
+                "Hall-",
+                "herk."
+            ],
+            "desc": "Hall-efektianturin herkkyys lepotilan tunnistuksessa (0=pois päältä | 1=vähäinen herkkyys | ... | 9=suurin herkkyys)"
+        },
+        "TemperatureUnit": {
+            "text2": [
+                "Lämpötilan",
+                "yksikkö"
+            ],
+            "desc": "C=celsius, F=fahrenheit"
+        },
+        "DisplayRotation": {
+            "text2": [
+                "Näytön",
+                "kierto"
+            ],
+            "desc": "O=oikeakätinen | V=vasenkätinen | A=automaattinen"
+        },
+        "CooldownBlink": {
+            "text2": [
+                "Jäähdytyksen",
+                "vilkutus"
+            ],
+            "desc": "Vilkuttaa jäähtyessä juotoskärjen lämpötilaa sen ollessa vielä vaarallisen kuuma"
+        },
+        "ScrollingSpeed": {
+            "text2": [
+                "Selityksien",
+                "nopeus"
+            ],
+            "desc": "Selityksien vieritysnopeus (H=hidas | N=nopea)"
+        },
+        "ReverseButtonTempChange": {
+            "text2": [
+                "Suunnanvaihto",
+                "+ - näppäimille"
+            ],
+            "desc": "Lämpötilapainikkeiden suunnan vaihtaminen"
+        },
+        "AnimSpeed": {
+            "text2": [
+                "Animaation",
+                "nopeus"
+            ],
+            "desc": "Animaatioiden nopeus valikossa (P=pois | A=alhainen | K=keskiverto | S=suuri)"
+        },
+        "AnimLoop": {
+            "text2": [
+                "Animaation",
+                "toistaminen"
+            ],
+            "desc": "Toista animaatiot valikossa"
+        },
+        "Brightness": {
+            "text2": [
+                "Screen",
+                "brightness"
+            ],
+            "desc": "Adjust the OLED screen brightness"
+        },
+        "ColourInversion": {
+            "text2": [
+                "Invert",
+                "screen"
+            ],
+            "desc": "Invert the OLED screen colors"
+        },
+        "LOGOTime": {
+            "text2": [
+                "Boot logo",
+                "duration"
+            ],
+            "desc": "Set boot logo duration (s=seconds)"
+        },
+        "AdvancedIdle": {
+            "text2": [
+                "Tiedot",
+                "lepotilassa"
+            ],
+            "desc": "Näyttää yksityiskohtaisemmat pienemmällä fontilla tiedot lepotilassa."
+        },
+        "AdvancedSoldering": {
+            "text2": [
+                "Tarkempi",
+                "juotosnäyttö"
+            ],
+            "desc": "Näyttää yksityiskohtaisemmat tiedot pienellä fontilla juotostilassa"
+        },
+        "PowerLimit": {
+            "text2": [
+                "Tehon-",
+                "rajoitus"
+            ],
+            "desc": "Suurin sallittu teho (Watti)"
+        },
+        "CalibrateCJC": {
+            "text2": [
+                "Calibrate CJC",
+                "at next boot"
+            ],
+            "desc": "At next boot tip Cold Junction Compensation will be calibrated (not required if Delta T is < 5°C)"
+        },
+        "VoltageCalibration": {
+            "text2": [
+                "Kalibroi",
+                "tulojännite?"
+            ],
+            "desc": "Tulojännitten kalibrointi (VIN) (paina pitkään poistuaksesi)"
+        },
+        "PowerPulsePower": {
+            "text2": [
+                "Herätyspulssin",
+                "voimakkuus"
+            ],
+            "desc": "Herätyspulssin voimakkuus (Watti)"
+        },
+        "PowerPulseWait": {
+            "text2": [
+                "Pulssin",
+                "odotusaika"
+            ],
+            "desc": "Odotusaika herätyspulssin lähetykseen (x 2.5s)"
+        },
+        "PowerPulseDuration": {
+            "text2": [
+                "Pulssin",
+                "kesto"
+            ],
+            "desc": "Herätyspulssin kesto (x 250ms)"
+        },
+        "SettingsReset": {
+            "text2": [
+                "Palauta",
+                "tehdasasetukset?"
+            ],
+            "desc": "Palauta kaikki asetukset oletusarvoihin"
+        },
+        "LanguageSwitch": {
+            "text2": [
+                "Kieli:",
+                " FI       Suomi"
+            ],
+            "desc": ""
+        }
+    }
+}

Translations/translation_FR.json

@@ -1,207 +1,341 @@
-{
-  "languageCode": "FR",
-  "languageLocalName": "Français",
-  "fonts": ["ascii_basic", "latin_extended"],
-  "tempUnitFahrenheit": false,
-  "messages": {
-    "SettingsCalibrationWarning": "Assurez-vous que la panne soit à température ambiante avant de continuer !",
-    "SettingsResetWarning": "Voulez-vous vraiment réinitialiser les paramètres aux valeurs par défaut ?",
-    "UVLOWarningString": "DC FAIBL",
-    "UndervoltageString": "Sous-tension",
-    "InputVoltageString": "V d'entrée: ",
-    "SleepingSimpleString": "Zzzz",
-    "SleepingAdvancedString": "En veille...",
-    "SleepingTipAdvancedString": "Panne:",
-    "OffString": "Off"
-  },
-  "messagesWarn": {
-    "ResetOKMessage": "Reset OK",
-    "SettingsResetMessage": ["Réglages", "réinitialisés !"],
-    "NoAccelerometerMessage": ["Accéléromètre", "non détecté !"],
-    "NoPowerDeliveryMessage": ["USB-PD", "non détecté !"],
-    "LockingKeysString": "VERROUIL",
-    "UnlockingKeysString": "DEVERROU",
-    "WarningKeysLockedString": "! VERR. !",
-    "WarningThermalRunaway": ["Emballement", "thermique"]
-  },
-  "characters": {
-    "SettingRightChar": "D",
-    "SettingLeftChar": "G",
-    "SettingAutoChar": "A",
-    "SettingOffChar": "D",
-    "SettingSlowChar": "L",
-    "SettingMediumChar": "M",
-    "SettingFastChar": "R",
-    "SettingStartNoneChar": "D",
-    "SettingStartSolderingChar": "A",
-    "SettingStartSleepChar": "V",
-    "SettingStartSleepOffChar": "O",
-    "SettingSensitivityOff": "D",
-    "SettingSensitivityLow": "B",
-    "SettingSensitivityMedium": "M",
-    "SettingSensitivityHigh": "H",
-    "SettingLockDisableChar": "D",
-    "SettingLockBoostChar": "B",
-    "SettingLockFullChar": "V"
-  },
-  "menuGroups": {
-    "PowerMenu": {
-      "text2": ["Paramètres", "d'alim."],
-      "desc": "Paramètres d'alimentation"
-    },
-    "SolderingMenu": {
-      "text2": ["Paramètres", "de soudure"],
-      "desc": "Paramètres de soudure"
-    },
-    "PowerSavingMenu": {
-      "text2": ["Mode", "veille"],
-      "desc": "Paramètres d'économie d'énergie"
-    },
-    "UIMenu": {
-      "text2": ["Interface", "utilisateur"],
-      "desc": "Paramètres de l'interface utilisateur"
-    },
-    "AdvancedMenu": {
-      "text2": ["Options", "avancées"],
-      "desc": "Options avancées"
-    }
-  },
-  "menuOptions": {
-    "DCInCutoff": {
-      "text2": ["Source", "d'alim."],
-      "desc": "Source d'alimentation. Règle la tension de coupure (DC 10V) (S 3.3V par cellules, désactive la limite de puissance)"
-    },
-    "SleepTemperature": {
-      "text2": ["Temp.", "veille"],
-      "desc": "Température de la panne en \"mode veille\""
-    },
-    "SleepTimeout": {
-      "text2": ["Délai", "veille"],
-      "desc": "Délai avant mise en veille (s=secondes | m=minutes)"
-    },
-    "ShutdownTimeout": {
-      "text2": ["Délai", "extinction"],
-      "desc": "Délai avant extinction (m=minutes)"
-    },
-    "MotionSensitivity": {
-      "text2": ["Sensibilité", "au mouvement"],
-      "desc": "0=désactivé | 1=peu sensible | ... | 9=très sensible"
-    },
-    "TemperatureUnit": {
-      "text2": ["Unité de", "température"],
-      "desc": "C=Celsius | F=Fahrenheit"
-    },
-    "AdvancedIdle": {
-      "text2": ["Écran veille", "détaillé"],
-      "desc": "Afficher les informations détaillées sur l'écran de veille"
-    },
-    "DisplayRotation": {
-      "text2": ["Orientation", "de l'écran"],
-      "desc": "D=droitier | G=gaucher | A=automatique"
-    },
-    "BoostTemperature": {
-      "text2": ["Temp.", "boost"],
-      "desc": "Température utilisée en \"mode boost\""
-    },
-    "AutoStart": {
-      "text2": ["Chauffer au", "démarrage"],
-      "desc": "D=désactivé | A=activé | V=mode veille | O=mode veille à température ambiante"
-    },
-    "CooldownBlink": {
-      "text2": ["Refroidir en", "clignotant"],
-      "desc": "Faire clignoter la température lors du refroidissement tant que la panne est chaude"
-    },
-    "TemperatureCalibration": {
-      "text2": ["Étalonner", "température"],
-      "desc": "Étalonner température de la panne"
-    },
-    "SettingsReset": {
-      "text2": ["Réinitialisation", "d'usine"],
-      "desc": "Réinitialiser tous les réglages"
-    },
-    "VoltageCalibration": {
-      "text2": ["Étalonner", "tension d'entrée"],
-      "desc": "Étalonner tension d'entrée (appui long pour quitter)"
-    },
-    "AdvancedSoldering": {
-      "text2": ["Écran soudure", "détaillé"],
-      "desc": "Afficher les informations détaillées sur l'écran de soudure"
-    },
-    "ScrollingSpeed": {
-      "text2": ["Vitesse de", "défilement"],
-      "desc": "Vitesse de défilement du texte (R=rapide | L=lent)"
-    },
-    "QCMaxVoltage": {
-      "text2": ["Tension", "QC"],
-      "desc": "Tension maximale désirée avec une alimentation QC"
-    },
-    "PDNegTimeout": {
-      "text2": ["Délai", "expiration PD"],
-      "desc": "Délai de la negociation PD par étapes de 100ms pour la compatiblité avec certains chargeurs QC"
-    },
-    "PowerLimit": {
-      "text2": ["Limite de", "puissance"],
-      "desc": "Puissance maximale utilisable (W=watts)"
-    },
-    "ReverseButtonTempChange": {
-      "text2": ["Inverser les", "touches + -"],
-      "desc": "Inverser les boutons d'ajustement de température"
-    },
-    "TempChangeShortStep": {
-      "text2": ["Incrément", "appui court"],
-      "desc": "Incrément de changement de température sur appui court"
-    },
-    "TempChangeLongStep": {
-      "text2": ["Incrément", "appui long"],
-      "desc": "Incrément de changement de température sur appui long"
-    },
-    "PowerPulsePower": {
-      "text2": ["Puissance des", "impulsions"],
-      "desc": "Puissance des impulsions pour éviter la mise en veille des batteries (watts)"
-    },
-    "LockingMode": {
-      "text2": ["Verrouiller", "les boutons"],
-      "desc": "Pendant la soudure, appuyer sur les deux boutons pour les verrouiller (D=désactivé | B=boost seulement | V=verr. total)"
-    },
-    "HallEffSensitivity": {
-      "text2": ["Sensibilité", "capteur effet hall"],
-      "desc": "Sensibilité du capteur à effet Hall pour la mise en veille (0=désactivé | 1=peu sensible | ... | 9=très sensible)"
-    },
-    "MinVolCell": {
-      "text2": ["Tension", "minimale"],
-      "desc": "Tension minimale autorisée par cellule (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)"
-    },
-    "AnimLoop": {
-      "text2": ["Rejouer", "anim. icônes"],
-      "desc": "Rejouer en boucle les animations des icônes dans le menu principal"
-    },
-    "AnimSpeed": {
-      "text2": ["Vitesse", "anim. icônes"],
-      "desc": "Vitesse des animations des icônes dans le menu (D=désactivé | L=lente | M=moyenne | R=rapide)"
-    },
-    "PowerPulseWait": {
-      "text2": ["Délai entre", "les impulsions"],
-      "desc": "Délai entre chaque impulsion pour empêcher la mise en veille (x 2.5s)"
-    },
-    "PowerPulseDuration": {
-      "text2": ["Durée des", "impulsions"],
-      "desc": "Durée des impulsions pour empêcher la mise en veille (x 250ms)"
-    },
-    "LanguageSwitch": {
-      "text2": ["Langue :", " FR    Français"],
-      "desc": "Langue du firmware"
-    },
-    "Brightness": {
-      "text2": ["Luminosité", "de l'écran"],
-      "desc": "Ajuster le contraste/luminosité de l'écran OLED"
-    },
-    "ColourInversion": {
-      "text2": ["Inverser", "les couleurs"],
-      "desc": "Inverser les couleurs de l'écran OLED"
-    },
-    "LOGOTime": {
-      "text2": ["Boot logo", "duration"],
-      "desc": "Sets the duration for the boot logo (s=seconds)"
-    }
-  }
-}
+{
+    "languageCode": "FR",
+    "languageLocalName": "Français",
+    "tempUnitFahrenheit": false,
+    "messages": {
+        "SettingsCalibrationWarning": "Before rebooting, make sure tip & handle are at room temperature!",
+        "CJCCalibrating": "calibrating",
+        "SettingsResetWarning": "Voulez-vous vraiment réinitialiser les paramètres aux valeurs par défaut ?",
+        "UVLOWarningString": "DC FAIBL",
+        "UndervoltageString": "Sous-tension",
+        "InputVoltageString": "V d'entrée: ",
+        "SleepingSimpleString": "Zzzz",
+        "SleepingAdvancedString": "En veille...",
+        "SleepingTipAdvancedString": "Panne:",
+        "OffString": "Off",
+        "DeviceFailedValidationWarning": "Votre appareil semble être une contrefaçon !"
+    },
+    "messagesWarn": {
+        "CJCCalibrationDone": [
+            "Calibration",
+            "done!"
+        ],
+        "ResetOKMessage": "Reset OK",
+        "SettingsResetMessage": [
+            "Réglages",
+            "réinitialisés !"
+        ],
+        "NoAccelerometerMessage": [
+            "Accéléromètre",
+            "non détecté !"
+        ],
+        "NoPowerDeliveryMessage": [
+            "USB-PD",
+            "non détecté !"
+        ],
+        "LockingKeysString": "VERROUIL",
+        "UnlockingKeysString": "DEVERROU",
+        "WarningKeysLockedString": "! VERR. !",
+        "WarningThermalRunaway": [
+            "Emballement",
+            "thermique"
+        ]
+    },
+    "characters": {
+        "SettingRightChar": "D",
+        "SettingLeftChar": "G",
+        "SettingAutoChar": "A",
+        "SettingOffChar": "D",
+        "SettingSlowChar": "L",
+        "SettingMediumChar": "M",
+        "SettingFastChar": "R",
+        "SettingStartNoneChar": "D",
+        "SettingStartSolderingChar": "A",
+        "SettingStartSleepChar": "V",
+        "SettingStartSleepOffChar": "O",
+        "SettingSensitivityOff": "D",
+        "SettingSensitivityLow": "B",
+        "SettingSensitivityMedium": "M",
+        "SettingSensitivityHigh": "H",
+        "SettingLockDisableChar": "D",
+        "SettingLockBoostChar": "B",
+        "SettingLockFullChar": "V"
+    },
+    "menuGroups": {
+        "PowerMenu": {
+            "text2": [
+                "Paramètres",
+                "d'alim."
+            ],
+            "desc": ""
+        },
+        "SolderingMenu": {
+            "text2": [
+                "Paramètres",
+                "de soudure"
+            ],
+            "desc": ""
+        },
+        "PowerSavingMenu": {
+            "text2": [
+                "Mode",
+                "veille"
+            ],
+            "desc": ""
+        },
+        "UIMenu": {
+            "text2": [
+                "Interface",
+                "utilisateur"
+            ],
+            "desc": ""
+        },
+        "AdvancedMenu": {
+            "text2": [
+                "Options",
+                "avancées"
+            ],
+            "desc": ""
+        }
+    },
+    "menuOptions": {
+        "DCInCutoff": {
+            "text2": [
+                "Source",
+                "d'alim."
+            ],
+            "desc": "Source d'alimentation. Règle la tension de coupure (DC 10V) (S 3.3V par cellules, désactive la limite de puissance)"
+        },
+        "MinVolCell": {
+            "text2": [
+                "Tension",
+                "minimale"
+            ],
+            "desc": "Tension minimale autorisée par cellule (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)"
+        },
+        "QCMaxVoltage": {
+            "text2": [
+                "Tension",
+                "QC"
+            ],
+            "desc": "Tension maximale désirée avec une alimentation QC"
+        },
+        "PDNegTimeout": {
+            "text2": [
+                "Délai",
+                "expir. PD"
+            ],
+            "desc": "Délai de la negociation PD par étapes de 100ms pour la compatiblité avec certains chargeurs QC"
+        },
+        "BoostTemperature": {
+            "text2": [
+                "Temp.",
+                "boost"
+            ],
+            "desc": "Température utilisée en \"mode boost\""
+        },
+        "AutoStart": {
+            "text2": [
+                "Chauffer au",
+                "démarrage"
+            ],
+            "desc": "D=désactivé | A=activé | V=mode veille | O=mode veille à température ambiante"
+        },
+        "TempChangeShortStep": {
+            "text2": [
+                "Incrément",
+                "appui court"
+            ],
+            "desc": "Incrément de changement de température sur appui court"
+        },
+        "TempChangeLongStep": {
+            "text2": [
+                "Incrément",
+                "appui long"
+            ],
+            "desc": "Incrément de changement de température sur appui long"
+        },
+        "LockingMode": {
+            "text2": [
+                "Verrouiller",
+                "les boutons"
+            ],
+            "desc": "Pendant la soudure, appuyer sur les deux boutons pour les verrouiller (D=désactivé | B=boost seulement | V=verr. total)"
+        },
+        "MotionSensitivity": {
+            "text2": [
+                "Sensibilité",
+                "au mouvement"
+            ],
+            "desc": "0=désactivé | 1=peu sensible | ... | 9=très sensible"
+        },
+        "SleepTemperature": {
+            "text2": [
+                "Temp.",
+                "veille"
+            ],
+            "desc": "Température de la panne en \"mode veille\""
+        },
+        "SleepTimeout": {
+            "text2": [
+                "Délai",
+                "veille"
+            ],
+            "desc": "Délai avant mise en veille (s=secondes | m=minutes)"
+        },
+        "ShutdownTimeout": {
+            "text2": [
+                "Délai",
+                "arrêt"
+            ],
+            "desc": "Délai avant l'arrêt du fer à souder (m=minutes)"
+        },
+        "HallEffSensitivity": {
+            "text2": [
+                "Sensibilité",
+                "capteur effet hall"
+            ],
+            "desc": "Sensibilité du capteur à effet Hall pour la mise en veille (0=désactivé | 1=peu sensible | ... | 9=très sensible)"
+        },
+        "TemperatureUnit": {
+            "text2": [
+                "Unité de",
+                "température"
+            ],
+            "desc": "C=Celsius | F=Fahrenheit"
+        },
+        "DisplayRotation": {
+            "text2": [
+                "Orientation",
+                "de l'écran"
+            ],
+            "desc": "D=droitier | G=gaucher | A=automatique"
+        },
+        "CooldownBlink": {
+            "text2": [
+                "Refroidir en",
+                "clignotant"
+            ],
+            "desc": "Faire clignoter la température lors du refroidissement tant que la panne est chaude"
+        },
+        "ScrollingSpeed": {
+            "text2": [
+                "Vitesse de",
+                "défilement"
+            ],
+            "desc": "Vitesse de défilement du texte (R=rapide | L=lent)"
+        },
+        "ReverseButtonTempChange": {
+            "text2": [
+                "Inverser les",
+                "touches + -"
+            ],
+            "desc": "Inverser les boutons d'ajustement de température"
+        },
+        "AnimSpeed": {
+            "text2": [
+                "Vitesse",
+                "anim. icônes"
+            ],
+            "desc": "Vitesse des animations des icônes dans le menu (D=désactivé | L=lente | M=moyenne | R=rapide)"
+        },
+        "AnimLoop": {
+            "text2": [
+                "Rejouer",
+                "anim. icônes"
+            ],
+            "desc": "Rejouer en boucle les animations des icônes dans le menu principal"
+        },
+        "Brightness": {
+            "text2": [
+                "Luminosité",
+                "de l'écran"
+            ],
+            "desc": "Ajuster la luminosité de l'écran OLED"
+        },
+        "ColourInversion": {
+            "text2": [
+                "Inverser",
+                "les couleurs"
+            ],
+            "desc": "Inverser les couleurs de l'écran OLED"
+        },
+        "LOGOTime": {
+            "text2": [
+                "Durée logo",
+                "au démarrage"
+            ],
+            "desc": "Définit la durée d'affichage du logo au démarrage (s=secondes)"
+        },
+        "AdvancedIdle": {
+            "text2": [
+                "Écran veille",
+                "détaillé"
+            ],
+            "desc": "Afficher les informations détaillées sur l'écran de veille"
+        },
+        "AdvancedSoldering": {
+            "text2": [
+                "Écran soudure",
+                "détaillé"
+            ],
+            "desc": "Afficher les informations détaillées sur l'écran de soudure"
+        },
+        "PowerLimit": {
+            "text2": [
+                "Limite de",
+                "puissance"
+            ],
+            "desc": "Puissance maximale utilisable (W=watts)"
+        },
+        "CalibrateCJC": {
+            "text2": [
+                "Calibrate CJC",
+                "at next boot"
+            ],
+            "desc": "At next boot tip Cold Junction Compensation will be calibrated (not required if Delta T is < 5°C)"
+        },
+        "VoltageCalibration": {
+            "text2": [
+                "Étalonner",
+                "tension d'entrée"
+            ],
+            "desc": "Étalonner tension d'entrée (appui long pour quitter)"
+        },
+        "PowerPulsePower": {
+            "text2": [
+                "Puissance",
+                "impulsions"
+            ],
+            "desc": "Puissance des impulsions pour éviter la mise en veille des batteries (watts)"
+        },
+        "PowerPulseWait": {
+            "text2": [
+                "Délai entre",
+                "les impulsions"
+            ],
+            "desc": "Délai entre chaque impulsion pour empêcher la mise en veille (x 2.5s)"
+        },
+        "PowerPulseDuration": {
+            "text2": [
+                "Durée des",
+                "impulsions"
+            ],
+            "desc": "Durée des impulsions pour empêcher la mise en veille (x 250ms)"
+        },
+        "SettingsReset": {
+            "text2": [
+                "Réinitialisation",
+                "d'usine"
+            ],
+            "desc": "Réinitialiser tous les réglages"
+        },
+        "LanguageSwitch": {
+            "text2": [
+                "Langue:",
+                " FR    Français"
+            ],
+            "desc": ""
+        }
+    }
+}

Translations/translation_HR.json

@@ -1,207 +1,341 @@
-{
-  "languageCode": "HR",
-  "languageLocalName": "Hrvatski",
-  "fonts": ["ascii_basic", "latin_extended"],
-  "tempUnitFahrenheit": false,
-  "messages": {
-    "SettingsCalibrationWarning": "Provjerite da je vršak ohlađen na sobnu temperaturu prije nego što nastavite!",
-    "SettingsResetWarning": "Jeste li sigurni da želite sve postavke vratiti na tvorničke vrijednosti?",
-    "UVLOWarningString": "BATERIJA",
-    "UndervoltageString": "PRENIZAK NAPON",
-    "InputVoltageString": "Napajanje: ",
-    "SleepingSimpleString": "Zzz ",
-    "SleepingAdvancedString": "SPAVANJE...",
-    "SleepingTipAdvancedString": "Vrh: ",
-    "OffString": "Off"
-  },
-  "messagesWarn": {
-    "ResetOKMessage": "Reset OK",
-    "SettingsResetMessage": ["Certain settings", "were changed!"],
-    "NoAccelerometerMessage": ["No accelerometer", "detected!"],
-    "NoPowerDeliveryMessage": ["No USB-PD IC", "detected!"],
-    "LockingKeysString": "LOCKED",
-    "UnlockingKeysString": "UNLOCKED",
-    "WarningKeysLockedString": "!LOCKED!",
-    "WarningThermalRunaway": ["Thermal", "Runaway"]
-  },
-  "characters": {
-    "SettingRightChar": "D",
-    "SettingLeftChar": "L",
-    "SettingAutoChar": "A",
-    "SettingOffChar": "O",
-    "SettingSlowChar": "S",
-    "SettingMediumChar": "M",
-    "SettingFastChar": "B",
-    "SettingStartNoneChar": "I",
-    "SettingStartSolderingChar": "L",
-    "SettingStartSleepChar": "R",
-    "SettingStartSleepOffChar": "S",
-    "SettingSensitivityOff": "O",
-    "SettingSensitivityLow": "L",
-    "SettingSensitivityMedium": "M",
-    "SettingSensitivityHigh": "H",
-    "SettingLockDisableChar": "D",
-    "SettingLockBoostChar": "B",
-    "SettingLockFullChar": "F"
-  },
-  "menuGroups": {
-    "PowerMenu": {
-      "text2": ["Power", "settings"],
-      "desc": "Power settings"
-    },
-    "SolderingMenu": {
-      "text2": ["Postavke", "lemljenja"],
-      "desc": "Postavke pri lemljenju"
-    },
-    "PowerSavingMenu": {
-      "text2": ["Ušteda", "energije"],
-      "desc": "Postavke spavanja i štednje energije"
-    },
-    "UIMenu": {
-      "text2": ["Korisničko", "sučelje"],
-      "desc": "Postavke korisničkog sučelja"
-    },
-    "AdvancedMenu": {
-      "text2": ["Napredne", "opcije"],
-      "desc": "Upravljanje naprednim opcijama"
-    }
-  },
-  "menuOptions": {
-    "DCInCutoff": {
-      "text2": ["Izvor", "napajanja"],
-      "desc": "Izvor napajanja. Postavlja napon isključivanja. (DC 10V) (S 3.3V po ćeliji)"
-    },
-    "SleepTemperature": {
-      "text2": ["Temp", "spavanja"],
-      "desc": "Temperatura na koju se spušta lemilica nakon određenog vremena mirovanja. (C | F)"
-    },
-    "SleepTimeout": {
-      "text2": ["Vrijeme", "spavanja"],
-      "desc": "Vrijeme mirovanja nakon kojega lemilica spušta temperaturu. (Minute | Sekunde)"
-    },
-    "ShutdownTimeout": {
-      "text2": ["Vrijeme", "gašenja"],
-      "desc": "Vrijeme mirovanja nakon kojega će se lemilica ugasiti. (Minute)"
-    },
-    "MotionSensitivity": {
-      "text2": ["Osjetljivost", "pokreta"],
-      "desc": "Osjetljivost prepoznavanja pokreta. (0=Ugašeno | 1=Najmanje osjetljivo | ... | 9=Najosjetljivije)"
-    },
-    "TemperatureUnit": {
-      "text2": ["Jedinica", "temperature"],
-      "desc": "Jedinica temperature. (C=Celzij | F=Fahrenheit)"
-    },
-    "AdvancedIdle": {
-      "text2": ["Detalji", "pri čekanju"],
-      "desc": "Prikazivanje detaljnih informacija tijekom čekanja."
-    },
-    "DisplayRotation": {
-      "text2": ["Rotacija", "ekrana"],
-      "desc": "Orijentacija ekrana. (D=Desnoruki | L=Ljevoruki | A=Automatski)"
-    },
-    "BoostTemperature": {
-      "text2": ["Boost", "temp"],
-      "desc": "Temperatura u pojačanom (Boost) načinu."
-    },
-    "AutoStart": {
-      "text2": ["Auto", "start"],
-      "desc": "Ako je aktivno, lemilica po uključivanju napajanja odmah počinje grijati. (I=isključeno | L=lemljenje | R=rezervni | S=rezervni sobna temperatura)"
-    },
-    "CooldownBlink": {
-      "text2": ["Upozorenje", "pri hlađenju"],
-      "desc": "Bljeskanje temperature prilikom hlađenja, ako je lemilica vruća."
-    },
-    "TemperatureCalibration": {
-      "text2": ["Kalibracija", "temperature"],
-      "desc": "Kalibriranje temperature mjeri razliku temperatura vrška i drške, dok je lemilica hladna."
-    },
-    "SettingsReset": {
-      "text2": ["Tvorničke", "postavke"],
-      "desc": "Vraćanje svih postavki na tvorničke vrijednosti."
-    },
-    "VoltageCalibration": {
-      "text2": ["Kalibracija", "napona napajanja"],
-      "desc": "Kalibracija ulaznog napona. Podešavanje gumbima, dugački pritisak za kraj."
-    },
-    "AdvancedSoldering": {
-      "text2": ["Detalji", "pri lemljenju"],
-      "desc": "Prikazivanje detaljnih informacija tijekom lemljenja."
-    },
-    "ScrollingSpeed": {
-      "text2": ["Brzina", "poruka"],
-      "desc": "Brzina kretanja dugačkih poruka. (B=brzo | S=sporo)"
-    },
-    "QCMaxVoltage": {
-      "text2": ["Snaga", "napajanja"],
-      "desc": "Snaga modula za napajanje"
-    },
-    "PDNegTimeout": {
-      "text2": ["PD", "timeout"],
-      "desc": "PD negotiation timeout in 100ms steps for compatibility with some QC chargers"
-    },
-    "PowerLimit": {
-      "text2": ["Power", "limit"],
-      "desc": "Maximum power the iron can use (W=watt)"
-    },
-    "ReverseButtonTempChange": {
-      "text2": ["Swap", "+ - keys"],
-      "desc": "Reverse assignment of buttons for temperature adjustment"
-    },
-    "TempChangeShortStep": {
-      "text2": ["Temp change", "short"],
-      "desc": "Temperature-change-increment on short button press"
-    },
-    "TempChangeLongStep": {
-      "text2": ["Temp change", "long"],
-      "desc": "Temperature-change-increment on long button press"
-    },
-    "PowerPulsePower": {
-      "text2": ["Power", "pulse"],
-      "desc": "Intensity of power of keep-awake-pulse (watt)"
-    },
-    "HallEffSensitivity": {
-      "text2": ["Hall sensor", "sensitivity"],
-      "desc": "Sensitivity of the Hall effect sensor to detect sleep (0=Ugašeno | 1=Najmanje osjetljivo | ... | 9=Najosjetljivije)"
-    },
-    "LockingMode": {
-      "text2": ["Allow locking", "buttons"],
-      "desc": "While soldering, hold down both buttons to toggle locking them (D=disable | B=boost mode only | F=full locking)"
-    },
-    "MinVolCell": {
-      "text2": ["Minimum", "voltage"],
-      "desc": "Minimum allowed voltage per cell (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)"
-    },
-    "AnimLoop": {
-      "text2": ["Anim.", "loop"],
-      "desc": "Loop icon animations in main menu"
-    },
-    "AnimSpeed": {
-      "text2": ["Anim.", "speed"],
-      "desc": "Pace of icon animations in menu (O=off | S=slow | M=medium | B=fast)"
-    },
-    "PowerPulseWait": {
-      "text2": ["Power pulse", "delay"],
-      "desc": "Delay before keep-awake-pulse is triggered (x 2.5s)"
-    },
-    "PowerPulseDuration": {
-      "text2": ["Power pulse", "duration"],
-      "desc": "Keep-awake-pulse duration (x 250ms)"
-    },
-    "LanguageSwitch": {
-      "text2": ["Jezik:", " HR    Hrvatski"],
-      "desc": ""
-    },
-    "Brightness": {
-      "text2": ["Screen", "brightness"],
-      "desc": "Adjust the brightness of the OLED screen"
-    },
-    "ColourInversion": {
-      "text2": ["Invert", "screen"],
-      "desc": "Invert the colours of the OLED screen"
-    },
-    "LOGOTime": {
-      "text2": ["Boot logo", "duration"],
-      "desc": "Sets the duration for the boot logo (s=seconds)"
-    }
-  }
-}
+{
+    "languageCode": "HR",
+    "languageLocalName": "Hrvatski",
+    "tempUnitFahrenheit": false,
+    "messages": {
+        "SettingsCalibrationWarning": "Before rebooting, make sure tip & handle are at room temperature!",
+        "CJCCalibrating": "calibrating",
+        "SettingsResetWarning": "Jeste li sigurni da želite sve postavke vratiti na tvorničke vrijednosti?",
+        "UVLOWarningString": "BATERIJA",
+        "UndervoltageString": "PRENIZAK NAPON",
+        "InputVoltageString": "Napajanje: ",
+        "SleepingSimpleString": "Zzz ",
+        "SleepingAdvancedString": "SPAVANJE...",
+        "SleepingTipAdvancedString": "Vrh: ",
+        "OffString": "Off",
+        "DeviceFailedValidationWarning": "Your device is most likely a counterfeit!"
+    },
+    "messagesWarn": {
+        "CJCCalibrationDone": [
+            "Calibration",
+            "done!"
+        ],
+        "ResetOKMessage": "Reset OK",
+        "SettingsResetMessage": [
+            "Certain settings",
+            "were changed!"
+        ],
+        "NoAccelerometerMessage": [
+            "No accelerometer",
+            "detected!"
+        ],
+        "NoPowerDeliveryMessage": [
+            "No USB-PD IC",
+            "detected!"
+        ],
+        "LockingKeysString": "LOCKED",
+        "UnlockingKeysString": "UNLOCKED",
+        "WarningKeysLockedString": "!LOCKED!",
+        "WarningThermalRunaway": [
+            "Thermal",
+            "Runaway"
+        ]
+    },
+    "characters": {
+        "SettingRightChar": "D",
+        "SettingLeftChar": "L",
+        "SettingAutoChar": "A",
+        "SettingOffChar": "O",
+        "SettingSlowChar": "S",
+        "SettingMediumChar": "M",
+        "SettingFastChar": "B",
+        "SettingStartNoneChar": "I",
+        "SettingStartSolderingChar": "L",
+        "SettingStartSleepChar": "R",
+        "SettingStartSleepOffChar": "S",
+        "SettingSensitivityOff": "O",
+        "SettingSensitivityLow": "L",
+        "SettingSensitivityMedium": "M",
+        "SettingSensitivityHigh": "H",
+        "SettingLockDisableChar": "D",
+        "SettingLockBoostChar": "B",
+        "SettingLockFullChar": "F"
+    },
+    "menuGroups": {
+        "PowerMenu": {
+            "text2": [
+                "Power",
+                "settings"
+            ],
+            "desc": ""
+        },
+        "SolderingMenu": {
+            "text2": [
+                "Postavke",
+                "lemljenja"
+            ],
+            "desc": ""
+        },
+        "PowerSavingMenu": {
+            "text2": [
+                "Ušteda",
+                "energije"
+            ],
+            "desc": ""
+        },
+        "UIMenu": {
+            "text2": [
+                "Korisničko",
+                "sučelje"
+            ],
+            "desc": ""
+        },
+        "AdvancedMenu": {
+            "text2": [
+                "Napredne",
+                "opcije"
+            ],
+            "desc": ""
+        }
+    },
+    "menuOptions": {
+        "DCInCutoff": {
+            "text2": [
+                "Izvor",
+                "napajanja"
+            ],
+            "desc": "Izvor napajanja. Postavlja napon isključivanja. (DC 10V) (S 3.3V po ćeliji)"
+        },
+        "MinVolCell": {
+            "text2": [
+                "Minimum",
+                "voltage"
+            ],
+            "desc": "Minimum allowed voltage per battery cell (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)"
+        },
+        "QCMaxVoltage": {
+            "text2": [
+                "Snaga",
+                "napajanja"
+            ],
+            "desc": "Snaga modula za napajanje"
+        },
+        "PDNegTimeout": {
+            "text2": [
+                "PD",
+                "timeout"
+            ],
+            "desc": "PD negotiation timeout in 100ms steps for compatibility with some QC chargers"
+        },
+        "BoostTemperature": {
+            "text2": [
+                "Boost",
+                "temp"
+            ],
+            "desc": "Temperatura u pojačanom (Boost) načinu."
+        },
+        "AutoStart": {
+            "text2": [
+                "Auto",
+                "start"
+            ],
+            "desc": "Ako je aktivno, lemilica po uključivanju napajanja odmah počinje grijati. (I=isključeno | L=lemljenje | R=rezervni | S=rezervni sobna temperatura)"
+        },
+        "TempChangeShortStep": {
+            "text2": [
+                "Temp change",
+                "short"
+            ],
+            "desc": "Temperature-change-increment on short button press"
+        },
+        "TempChangeLongStep": {
+            "text2": [
+                "Temp change",
+                "long"
+            ],
+            "desc": "Temperature-change-increment on long button press"
+        },
+        "LockingMode": {
+            "text2": [
+                "Allow locking",
+                "buttons"
+            ],
+            "desc": "While soldering, hold down both buttons to toggle locking them (D=disable | B=boost mode only | F=full locking)"
+        },
+        "MotionSensitivity": {
+            "text2": [
+                "Osjetljivost",
+                "pokreta"
+            ],
+            "desc": "Osjetljivost prepoznavanja pokreta. (0=Ugašeno | 1=Najmanje osjetljivo | ... | 9=Najosjetljivije)"
+        },
+        "SleepTemperature": {
+            "text2": [
+                "Temp",
+                "spavanja"
+            ],
+            "desc": "Temperatura na koju se spušta lemilica nakon određenog vremena mirovanja. (C | F)"
+        },
+        "SleepTimeout": {
+            "text2": [
+                "Vrijeme",
+                "spavanja"
+            ],
+            "desc": "Vrijeme mirovanja nakon kojega lemilica spušta temperaturu. (Minute | Sekunde)"
+        },
+        "ShutdownTimeout": {
+            "text2": [
+                "Vrijeme",
+                "gašenja"
+            ],
+            "desc": "Vrijeme mirovanja nakon kojega će se lemilica ugasiti. (Minute)"
+        },
+        "HallEffSensitivity": {
+            "text2": [
+                "Hall sensor",
+                "sensitivity"
+            ],
+            "desc": "Sensitivity of the Hall effect sensor to detect sleep (0=Ugašeno | 1=Najmanje osjetljivo | ... | 9=Najosjetljivije)"
+        },
+        "TemperatureUnit": {
+            "text2": [
+                "Jedinica",
+                "temperature"
+            ],
+            "desc": "Jedinica temperature. (C=Celzij | F=Fahrenheit)"
+        },
+        "DisplayRotation": {
+            "text2": [
+                "Rotacija",
+                "ekrana"
+            ],
+            "desc": "Orijentacija ekrana. (D=Desnoruki | L=Ljevoruki | A=Automatski)"
+        },
+        "CooldownBlink": {
+            "text2": [
+                "Upozorenje",
+                "pri hlađenju"
+            ],
+            "desc": "Bljeskanje temperature prilikom hlađenja, ako je lemilica vruća."
+        },
+        "ScrollingSpeed": {
+            "text2": [
+                "Brzina",
+                "poruka"
+            ],
+            "desc": "Brzina kretanja dugačkih poruka. (B=brzo | S=sporo)"
+        },
+        "ReverseButtonTempChange": {
+            "text2": [
+                "Swap",
+                "+ - keys"
+            ],
+            "desc": "Reverse assignment of buttons for temperature adjustment"
+        },
+        "AnimSpeed": {
+            "text2": [
+                "Anim.",
+                "speed"
+            ],
+            "desc": "Pace of icon animations in menu (O=off | S=slow | M=medium | B=fast)"
+        },
+        "AnimLoop": {
+            "text2": [
+                "Anim.",
+                "loop"
+            ],
+            "desc": "Loop icon animations in main menu"
+        },
+        "Brightness": {
+            "text2": [
+                "Screen",
+                "brightness"
+            ],
+            "desc": "Adjust the OLED screen brightness"
+        },
+        "ColourInversion": {
+            "text2": [
+                "Invert",
+                "screen"
+            ],
+            "desc": "Invert the OLED screen colors"
+        },
+        "LOGOTime": {
+            "text2": [
+                "Boot logo",
+                "duration"
+            ],
+            "desc": "Set boot logo duration (s=seconds)"
+        },
+        "AdvancedIdle": {
+            "text2": [
+                "Detalji",
+                "pri čekanju"
+            ],
+            "desc": "Prikazivanje detaljnih informacija tijekom čekanja."
+        },
+        "AdvancedSoldering": {
+            "text2": [
+                "Detalji",
+                "pri lemljenju"
+            ],
+            "desc": "Prikazivanje detaljnih informacija tijekom lemljenja."
+        },
+        "PowerLimit": {
+            "text2": [
+                "Power",
+                "limit"
+            ],
+            "desc": "Maximum power the iron can use (W=watt)"
+        },
+        "CalibrateCJC": {
+            "text2": [
+                "Calibrate CJC",
+                "at next boot"
+            ],
+            "desc": "At next boot tip Cold Junction Compensation will be calibrated (not required if Delta T is < 5°C)"
+        },
+        "VoltageCalibration": {
+            "text2": [
+                "Kalibracija",
+                "napona napajanja"
+            ],
+            "desc": "Kalibracija ulaznog napona. Podešavanje gumbima, dugački pritisak za kraj."
+        },
+        "PowerPulsePower": {
+            "text2": [
+                "Power",
+                "pulse"
+            ],
+            "desc": "Intensity of power of keep-awake-pulse (W=watt)"
+        },
+        "PowerPulseWait": {
+            "text2": [
+                "Power pulse",
+                "delay"
+            ],
+            "desc": "Delay before keep-awake-pulse is triggered (x 2.5s)"
+        },
+        "PowerPulseDuration": {
+            "text2": [
+                "Power pulse",
+                "duration"
+            ],
+            "desc": "Keep-awake-pulse duration (x 250ms)"
+        },
+        "SettingsReset": {
+            "text2": [
+                "Tvorničke",
+                "postavke"
+            ],
+            "desc": "Vraćanje svih postavki na tvorničke vrijednosti."
+        },
+        "LanguageSwitch": {
+            "text2": [
+                "Jezik:",
+                " HR    Hrvatski"
+            ],
+            "desc": ""
+        }
+    }
+}

Translations/translation_HU.json

@@ -1,207 +1,341 @@
-{
-  "languageCode": "HU",
-  "languageLocalName": "Magyar",
-  "fonts": ["ascii_basic", "latin_extended"],
-  "tempUnitFahrenheit": false,
-  "messages": {
-    "SettingsCalibrationWarning": "Folytatás előtt győződjön meg róla, hogy a forrasztó hegy szobahőmérsékletű!",
-    "SettingsResetWarning": "Biztos visszaállítja a beállításokat alapértékekre?",
-    "UVLOWarningString": "DC TÚL KEVÉS",
-    "UndervoltageString": "Alulfeszültség",
-    "InputVoltageString": "Bemenet V: ",
-    "SleepingSimpleString": "Zzzz",
-    "SleepingAdvancedString": "Alvás...",
-    "SleepingTipAdvancedString": "Hegy:",
-    "OffString": "Ki"
-  },
-  "messagesWarn": {
-    "ResetOKMessage": "Törlés OK",
-    "SettingsResetMessage": ["Beállítások", "visszaállítva!"],
-    "NoAccelerometerMessage": ["Nincs", "gyorsulásmérő!"],
-    "NoPowerDeliveryMessage": ["Nincs", "USB-PD IC!"],
-    "LockingKeysString": "LEZÁRVA",
-    "UnlockingKeysString": "FELOLDVA",
-    "WarningKeysLockedString": "!LEZÁRVA!",
-    "WarningThermalRunaway": ["Kontrollálatlan", "hőmérséklet!"]
-  },
-  "characters": {
-    "SettingRightChar": "J",
-    "SettingLeftChar": "B",
-    "SettingAutoChar": "A",
-    "SettingOffChar": "0",
-    "SettingSlowChar": "L",
-    "SettingMediumChar": "K",
-    "SettingFastChar": "Gy",
-    "SettingStartNoneChar": "K",
-    "SettingStartSolderingChar": "F",
-    "SettingStartSleepChar": "A",
-    "SettingStartSleepOffChar": "Sz",
-    "SettingSensitivityOff": "0",
-    "SettingSensitivityLow": "A",
-    "SettingSensitivityMedium": "K",
-    "SettingSensitivityHigh": "M",
-    "SettingLockDisableChar": "K",
-    "SettingLockBoostChar": "B",
-    "SettingLockFullChar": "T"
-  },
-  "menuGroups": {
-    "PowerMenu": {
-      "text2": ["Táp", "beállítások"],
-      "desc": "Táp beállítások"
-    },
-    "SolderingMenu": {
-      "text2": ["Forrasztási", "beállítások"],
-      "desc": "Forrasztási beállítások"
-    },
-    "PowerSavingMenu": {
-      "text2": ["Alvási", "módok"],
-      "desc": "Energiatakarékossági beállítások"
-    },
-    "UIMenu": {
-      "text2": ["Felhasználói", "felület"],
-      "desc": "Felhasználói felület beállításai"
-    },
-    "AdvancedMenu": {
-      "text2": ["Haladó", "beállítások"],
-      "desc": "Haladó beállítások"
-    }
-  },
-  "menuOptions": {
-    "DCInCutoff": {
-      "text2": ["Áram", "forrás"],
-      "desc": "Kikapcsolási feszültség beállítása (DC:10V | S:3.3V/LiPo cella | ki)"
-    },
-    "SleepTemperature": {
-      "text2": ["Alvási", "hőmérséklet"],
-      "desc": "Hőmérséklet alvó módban (C | F)"
-    },
-    "SleepTimeout": {
-      "text2": ["Alvás", "időzítő"],
-      "desc": "Alvási időzítő (perc | másodperc)"
-    },
-    "ShutdownTimeout": {
-      "text2": ["Kikapcsolás", "időzítő"],
-      "desc": "Kikapcsolási időzítő (perc)"
-    },
-    "MotionSensitivity": {
-      "text2": ["Mozgás", "érzékenység"],
-      "desc": "Mozgás érzékenység beállítása (0=kikapcsolva | 1=legkevésbé érzékeny | ... | 9=legérzékenyebb)"
-    },
-    "TemperatureUnit": {
-      "text2": ["Hőmérséklet", "mértékegysége"],
-      "desc": "Hőmérséklet mértékegysége (C=Celsius | F=Fahrenheit)"
-    },
-    "AdvancedIdle": {
-      "text2": ["Részletes", "készenlét"],
-      "desc": "Részletes információk megjelenítése kisebb betűméretben a készenléti képernyőn"
-    },
-    "DisplayRotation": {
-      "text2": ["Kijelző", "tájolása"],
-      "desc": "Kijelző tájolása (J=jobbkezes | B=balkezes | A=automatikus)"
-    },
-    "BoostTemperature": {
-      "text2": ["Boost", "hőmérséklet"],
-      "desc": "Hőmérséklet \"boost\" módban"
-    },
-    "AutoStart": {
-      "text2": ["Automatikus", "indítás"],
-      "desc": "Bekapcsolás után automatikusan lépjen forrasztás módba (K=ki | F=forrasztás | A=alvó mód | Sz=szobahőmérséklet)"
-    },
-    "CooldownBlink": {
-      "text2": ["Villogás", "hűléskor"],
-      "desc": "Villogjon a hőmérséklet kijelzése hűlés közben, amíg a forrasztó hegy forró"
-    },
-    "TemperatureCalibration": {
-      "text2": ["Hőmérséklet", "kalibrálása?"],
-      "desc": "Forrasztó hegy hőmérséklet-érzékelőjének kalibrálása"
-    },
-    "SettingsReset": {
-      "text2": ["Gyári", "beállítások?"],
-      "desc": "Beállítások alaphelyzetbe állítása"
-    },
-    "VoltageCalibration": {
-      "text2": ["Bemeneti fesz.", "kalibrálása?"],
-      "desc": "Bemeneti feszültség kalibrálása (hosszan nyomva kilép)"
-    },
-    "AdvancedSoldering": {
-      "text2": ["Részletes", "forrasztás infó"],
-      "desc": "Részletes információk megjelenítése forrasztás közben"
-    },
-    "ScrollingSpeed": {
-      "text2": ["Görgetés", "sebessége"],
-      "desc": "Szöveggörgetés sebessége"
-    },
-    "QCMaxVoltage": {
-      "text2": ["Max. USB", "feszültség"],
-      "desc": "Maximális USB feszültség (QuickCharge)"
-    },
-    "PDNegTimeout": {
-      "text2": ["PD", "időtúllépés"],
-      "desc": "PD egyeztetés időkerete (kompatibilitás QC töltőkkel) (x 100ms)"
-    },
-    "PowerLimit": {
-      "text2": ["Teljesítmény", "maximum"],
-      "desc": "Maximális felvett teljesitmény beállitása"
-    },
-    "ReverseButtonTempChange": {
-      "text2": ["+/- gomb", "megfordítása"],
-      "desc": "Forrasztó hegy hőmérsékletállító gombok felcserélése"
-    },
-    "TempChangeShortStep": {
-      "text2": ["Hőm. állítás", "rövid"],
-      "desc": "Hőmérséklet állítás rövid gombnyomásra (C | F)"
-    },
-    "TempChangeLongStep": {
-      "text2": ["Hőm. állítás", "hosszú"],
-      "desc": "Hőmérséklet állítás hosszú gombnyomásra (C | F)"
-    },
-    "PowerPulsePower": {
-      "text2": ["Ébr. pulzus", "nagysága"],
-      "desc": "Powerbankot ébrentartó áramfelvételi pulzusok nagysága (W)"
-    },
-    "HallEffSensitivity": {
-      "text2": ["Alvásérzékelő", "érzékenység"],
-      "desc": "Alvásérzékelő gyorsulásmérő érzékenysége (0=kikapcsolva | 1=legkevésbé érzékeny | ... | 9=legérzékenyebb)"
-    },
-    "LockingMode": {
-      "text2": ["Lezárás", "engedélyezés"],
-      "desc": "Forrasztás közben mindkét gombot hosszan lenyomva lezárja a kezelést (K=ki | B=csak \"boost\" módban | T=teljes lezárás)"
-    },
-    "MinVolCell": {
-      "text2": ["Minimum", "feszültség"],
-      "desc": "Minimális engedélyezett cellafeszültség (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)"
-    },
-    "AnimLoop": {
-      "text2": ["Folytonos", "animáció"],
-      "desc": "Főmenü ikonjainak folytonos animációja"
-    },
-    "AnimSpeed": {
-      "text2": ["Animáció", "sebessége"],
-      "desc": "Menüikonok animációjának sebessége (0=ki | L=lassú | K=közepes | Gy=gyors)"
-    },
-    "PowerPulseWait": {
-      "text2": ["Ébr. pulzus", "időköze"],
-      "desc": "Powerbankot ébrentartó áramfelvételi pulzusok időköze (x 2.5s)"
-    },
-    "PowerPulseDuration": {
-      "text2": ["Ébr. pulzus", "időtartama"],
-      "desc": "Powerbankot ébrentartó áramfelvételi pulzusok időtartama (x 250ms)"
-    },
-    "LanguageSwitch": {
-      "text2": ["Nyelv:", " HU      Magyar"],
-      "desc": "Firmware nyelve"
-    },
-    "Brightness": {
-      "text2": ["Képernyő", "kontraszt"],
-      "desc": "Képernyő kontrasztjának állítása"
-    },
-    "ColourInversion": {
-      "text2": ["Képernyő", "invertálás"],
-      "desc": "Képernyő színeinek invertálása"
-    },
-    "LOGOTime": {
-      "text2": ["Boot logo", "duration"],
-      "desc": "Sets the duration for the boot logo (s=seconds)"
-    }
-  }
-}
+{
+    "languageCode": "HU",
+    "languageLocalName": "Magyar",
+    "tempUnitFahrenheit": false,
+    "messages": {
+        "SettingsCalibrationWarning": "Before rebooting, make sure tip & handle are at room temperature!",
+        "CJCCalibrating": "calibrating",
+        "SettingsResetWarning": "Biztos visszaállítja a beállításokat alapértékekre?",
+        "UVLOWarningString": "DC TÚL KEVÉS",
+        "UndervoltageString": "Alulfeszültség",
+        "InputVoltageString": "Bemenet V: ",
+        "SleepingSimpleString": "Zzzz",
+        "SleepingAdvancedString": "Alvás...",
+        "SleepingTipAdvancedString": "Hegy:",
+        "OffString": "Ki",
+        "DeviceFailedValidationWarning": "Your device is most likely a counterfeit!"
+    },
+    "messagesWarn": {
+        "CJCCalibrationDone": [
+            "Calibration",
+            "done!"
+        ],
+        "ResetOKMessage": "Törlés OK",
+        "SettingsResetMessage": [
+            "Beállítások",
+            "visszaállítva!"
+        ],
+        "NoAccelerometerMessage": [
+            "Nincs",
+            "gyorsulásmérő!"
+        ],
+        "NoPowerDeliveryMessage": [
+            "Nincs",
+            "USB-PD IC!"
+        ],
+        "LockingKeysString": "LEZÁRVA",
+        "UnlockingKeysString": "FELOLDVA",
+        "WarningKeysLockedString": "!LEZÁRVA!",
+        "WarningThermalRunaway": [
+            "Kontrollálatlan",
+            "hőmérséklet!"
+        ]
+    },
+    "characters": {
+        "SettingRightChar": "J",
+        "SettingLeftChar": "B",
+        "SettingAutoChar": "A",
+        "SettingOffChar": "0",
+        "SettingSlowChar": "L",
+        "SettingMediumChar": "K",
+        "SettingFastChar": "Gy",
+        "SettingStartNoneChar": "K",
+        "SettingStartSolderingChar": "F",
+        "SettingStartSleepChar": "A",
+        "SettingStartSleepOffChar": "Sz",
+        "SettingSensitivityOff": "0",
+        "SettingSensitivityLow": "A",
+        "SettingSensitivityMedium": "K",
+        "SettingSensitivityHigh": "M",
+        "SettingLockDisableChar": "K",
+        "SettingLockBoostChar": "B",
+        "SettingLockFullChar": "T"
+    },
+    "menuGroups": {
+        "PowerMenu": {
+            "text2": [
+                "Táp",
+                "beállítások"
+            ],
+            "desc": ""
+        },
+        "SolderingMenu": {
+            "text2": [
+                "Forrasztási",
+                "beállítások"
+            ],
+            "desc": ""
+        },
+        "PowerSavingMenu": {
+            "text2": [
+                "Alvási",
+                "módok"
+            ],
+            "desc": ""
+        },
+        "UIMenu": {
+            "text2": [
+                "Felhasználói",
+                "felület"
+            ],
+            "desc": ""
+        },
+        "AdvancedMenu": {
+            "text2": [
+                "Haladó",
+                "beállítások"
+            ],
+            "desc": ""
+        }
+    },
+    "menuOptions": {
+        "DCInCutoff": {
+            "text2": [
+                "Áram",
+                "forrás"
+            ],
+            "desc": "Kikapcsolási feszültség beállítása (DC:10V | S:3.3V/LiPo cella | ki)"
+        },
+        "MinVolCell": {
+            "text2": [
+                "Minimum",
+                "feszültség"
+            ],
+            "desc": "Minimális engedélyezett cellafeszültség (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)"
+        },
+        "QCMaxVoltage": {
+            "text2": [
+                "Max. USB",
+                "feszültség"
+            ],
+            "desc": "Maximális USB feszültség (QuickCharge)"
+        },
+        "PDNegTimeout": {
+            "text2": [
+                "PD",
+                "időtúllépés"
+            ],
+            "desc": "PD egyeztetés időkerete (kompatibilitás QC töltőkkel) (x 100ms)"
+        },
+        "BoostTemperature": {
+            "text2": [
+                "Boost",
+                "hőmérséklet"
+            ],
+            "desc": "Hőmérséklet \"boost\" módban"
+        },
+        "AutoStart": {
+            "text2": [
+                "Automatikus",
+                "indítás"
+            ],
+            "desc": "Bekapcsolás után automatikusan lépjen forrasztás módba (K=ki | F=forrasztás | A=alvó mód | Sz=szobahőmérséklet)"
+        },
+        "TempChangeShortStep": {
+            "text2": [
+                "Hőm. állítás",
+                "rövid"
+            ],
+            "desc": "Hőmérséklet állítás rövid gombnyomásra (C | F)"
+        },
+        "TempChangeLongStep": {
+            "text2": [
+                "Hőm. állítás",
+                "hosszú"
+            ],
+            "desc": "Hőmérséklet állítás hosszú gombnyomásra (C | F)"
+        },
+        "LockingMode": {
+            "text2": [
+                "Lezárás",
+                "engedélyezés"
+            ],
+            "desc": "Forrasztás közben mindkét gombot hosszan lenyomva lezárja a kezelést (K=ki | B=csak \"boost\" módban | T=teljes lezárás)"
+        },
+        "MotionSensitivity": {
+            "text2": [
+                "Mozgás",
+                "érzékenység"
+            ],
+            "desc": "Mozgás érzékenység beállítása (0=kikapcsolva | 1=legkevésbé érzékeny | ... | 9=legérzékenyebb)"
+        },
+        "SleepTemperature": {
+            "text2": [
+                "Alvási",
+                "hőmérséklet"
+            ],
+            "desc": "Hőmérséklet alvó módban (C | F)"
+        },
+        "SleepTimeout": {
+            "text2": [
+                "Alvás",
+                "időzítő"
+            ],
+            "desc": "Alvási időzítő (perc | másodperc)"
+        },
+        "ShutdownTimeout": {
+            "text2": [
+                "Kikapcsolás",
+                "időzítő"
+            ],
+            "desc": "Kikapcsolási időzítő (perc)"
+        },
+        "HallEffSensitivity": {
+            "text2": [
+                "Alvásérzékelő",
+                "érzékenység"
+            ],
+            "desc": "Alvásérzékelő gyorsulásmérő érzékenysége (0=kikapcsolva | 1=legkevésbé érzékeny | ... | 9=legérzékenyebb)"
+        },
+        "TemperatureUnit": {
+            "text2": [
+                "Hőmérséklet",
+                "mértékegysége"
+            ],
+            "desc": "Hőmérséklet mértékegysége (C=Celsius | F=Fahrenheit)"
+        },
+        "DisplayRotation": {
+            "text2": [
+                "Kijelző",
+                "tájolása"
+            ],
+            "desc": "Kijelző tájolása (J=jobbkezes | B=balkezes | A=automatikus)"
+        },
+        "CooldownBlink": {
+            "text2": [
+                "Villogás",
+                "hűléskor"
+            ],
+            "desc": "Villogjon a hőmérséklet kijelzése hűlés közben, amíg a forrasztó hegy forró"
+        },
+        "ScrollingSpeed": {
+            "text2": [
+                "Görgetés",
+                "sebessége"
+            ],
+            "desc": "Szöveggörgetés sebessége"
+        },
+        "ReverseButtonTempChange": {
+            "text2": [
+                "+/- gomb",
+                "megfordítása"
+            ],
+            "desc": "Forrasztó hegy hőmérsékletállító gombok felcserélése"
+        },
+        "AnimSpeed": {
+            "text2": [
+                "Animáció",
+                "sebessége"
+            ],
+            "desc": "Menüikonok animációjának sebessége (0=ki | L=lassú | K=közepes | Gy=gyors)"
+        },
+        "AnimLoop": {
+            "text2": [
+                "Folytonos",
+                "animáció"
+            ],
+            "desc": "Főmenü ikonjainak folytonos animációja"
+        },
+        "Brightness": {
+            "text2": [
+                "Képernyő",
+                "kontraszt"
+            ],
+            "desc": "Képernyő kontrasztjának állítása"
+        },
+        "ColourInversion": {
+            "text2": [
+                "Képernyő",
+                "invertálás"
+            ],
+            "desc": "Képernyő színeinek invertálása"
+        },
+        "LOGOTime": {
+            "text2": [
+                "Boot logo",
+                "duration"
+            ],
+            "desc": "Set boot logo duration (s=seconds)"
+        },
+        "AdvancedIdle": {
+            "text2": [
+                "Részletes",
+                "készenlét"
+            ],
+            "desc": "Részletes információk megjelenítése kisebb betűméretben a készenléti képernyőn"
+        },
+        "AdvancedSoldering": {
+            "text2": [
+                "Részletes",
+                "forrasztás infó"
+            ],
+            "desc": "Részletes információk megjelenítése forrasztás közben"
+        },
+        "PowerLimit": {
+            "text2": [
+                "Teljesítmény",
+                "maximum"
+            ],
+            "desc": "Maximális felvett teljesitmény beállitása"
+        },
+        "CalibrateCJC": {
+            "text2": [
+                "Calibrate CJC",
+                "at next boot"
+            ],
+            "desc": "At next boot tip Cold Junction Compensation will be calibrated (not required if Delta T is < 5°C)"
+        },
+        "VoltageCalibration": {
+            "text2": [
+                "Bemeneti fesz.",
+                "kalibrálása?"
+            ],
+            "desc": "Bemeneti feszültség kalibrálása (hosszan nyomva kilép)"
+        },
+        "PowerPulsePower": {
+            "text2": [
+                "Ébr. pulzus",
+                "nagysága"
+            ],
+            "desc": "Powerbankot ébrentartó áramfelvételi pulzusok nagysága (W)"
+        },
+        "PowerPulseWait": {
+            "text2": [
+                "Ébr. pulzus",
+                "időköze"
+            ],
+            "desc": "Powerbankot ébrentartó áramfelvételi pulzusok időköze (x 2.5s)"
+        },
+        "PowerPulseDuration": {
+            "text2": [
+                "Ébr. pulzus",
+                "időtartama"
+            ],
+            "desc": "Powerbankot ébrentartó áramfelvételi pulzusok időtartama (x 250ms)"
+        },
+        "SettingsReset": {
+            "text2": [
+                "Gyári",
+                "beállítások?"
+            ],
+            "desc": "Beállítások alaphelyzetbe állítása"
+        },
+        "LanguageSwitch": {
+            "text2": [
+                "Nyelv:",
+                " HU      Magyar"
+            ],
+            "desc": ""
+        }
+    }
+}

Translations/translation_IT.json

@@ -1,207 +1,341 @@
-{
-  "languageCode": "IT",
-  "languageLocalName": "Italiano",
-  "fonts": ["ascii_basic", "latin_extended"],
-  "tempUnitFahrenheit": false,
-  "messages": {
-    "SettingsCalibrationWarning": "Assicurarsi che la punta si trovi a temperatura ambiente prima di continuare!",
-    "SettingsResetWarning": "Ripristinare le impostazioni iniziali?",
-    "UVLOWarningString": "DC BASSA",
-    "UndervoltageString": "DC INSUFFICIENTE",
-    "InputVoltageString": "V in:",
-    "SleepingSimpleString": "Zzz ",
-    "SleepingAdvancedString": "Riposo",
-    "SleepingTipAdvancedString": "Punta:",
-    "OffString": "OFF"
-  },
-  "messagesWarn": {
-    "ResetOKMessage": "Reset OK",
-    "SettingsResetMessage": ["Impostazioni", "ripristinate"],
-    "NoAccelerometerMessage": ["Accelerometro", "non rilevato"],
-    "NoPowerDeliveryMessage": ["USB PD", "non rilevato"],
-    "LockingKeysString": "Blocc.",
-    "UnlockingKeysString": "Sblocc.",
-    "WarningKeysLockedString": "BLOCCATO",
-    "WarningThermalRunaway": ["Temperatura", "fuori controllo"]
-  },
-  "characters": {
-    "SettingRightChar": "D",
-    "SettingLeftChar": "S",
-    "SettingAutoChar": "A",
-    "SettingOffChar": "O",
-    "SettingSlowChar": "L",
-    "SettingMediumChar": "M",
-    "SettingFastChar": "V",
-    "SettingStartNoneChar": "D",
-    "SettingStartSolderingChar": "S",
-    "SettingStartSleepChar": "R",
-    "SettingStartSleepOffChar": "A",
-    "SettingSensitivityOff": "O",
-    "SettingSensitivityLow": "B",
-    "SettingSensitivityMedium": "M",
-    "SettingSensitivityHigh": "A",
-    "SettingLockDisableChar": "D",
-    "SettingLockBoostChar": "T",
-    "SettingLockFullChar": "C"
-  },
-  "menuGroups": {
-    "PowerMenu": {
-      "text2": ["Opzioni", "alimentaz"],
-      "desc": "Menù d'impostazioni per l'alimentazione"
-    },
-    "SolderingMenu": {
-      "text2": ["Opzioni", "saldatura"],
-      "desc": "Menù d'impostazioni della modalità Saldatura"
-    },
-    "PowerSavingMenu": {
-      "text2": ["Risparmio", "energetico"],
-      "desc": "Menù d'impostazioni per il risparmio energetico"
-    },
-    "UIMenu": {
-      "text2": ["Interfaccia", "utente"],
-      "desc": "Menù d'impostazioni dell'interfaccia utente"
-    },
-    "AdvancedMenu": {
-      "text2": ["Opzioni", "avanzate"],
-      "desc": "Menù d'impostazioni avanzate"
-    }
-  },
-  "menuOptions": {
-    "DCInCutoff": {
-      "text2": ["Sorgente", "alimentaz"],
-      "desc": "Imposta una tensione minima di alimentazione attraverso la selezione di una sorgente [DC: 10 V; 3S/4S/5S/6S: 3,3 V per cella]"
-    },
-    "SleepTemperature": {
-      "text2": ["Temp", "riposo"],
-      "desc": "Imposta la temperatura da mantenere in modalità Riposo [°C/°F]"
-    },
-    "SleepTimeout": {
-      "text2": ["Timer", "riposo"],
-      "desc": "Imposta il timer per entrare in modalità Riposo [secondi/minuti]"
-    },
-    "ShutdownTimeout": {
-      "text2": ["Timer", "spegnimento"],
-      "desc": "Imposta il timer per lo spegnimento [minuti]"
-    },
-    "MotionSensitivity": {
-      "text2": ["Sensibilità", "al movimento"],
-      "desc": "Imposta la sensibilità al movimento per uscire dalla modalità Riposo [0: nessuna; 1: minima; 9: massima]"
-    },
-    "TemperatureUnit": {
-      "text2": ["Unità di", "temperatura"],
-      "desc": "Scegli l'unità di misura per la temperatura [C: grado Celsius; F: grado Farenheit]"
-    },
-    "AdvancedIdle": {
-      "text2": ["Interfaccia", "testuale"],
-      "desc": "Mostra informazioni dettagliate all'interno della schermata principale"
-    },
-    "DisplayRotation": {
-      "text2": ["Orientamento", "schermo"],
-      "desc": "Imposta l'orientamento dello schermo [D: mano destra; S: mano sinistra; A: automatico]"
-    },
-    "BoostTemperature": {
-      "text2": ["Temp", "Turbo"],
-      "desc": "Imposta la temperatura della funzione Turbo [°C/°F]"
-    },
-    "AutoStart": {
-      "text2": ["Avvio", "automatico"],
-      "desc": "Attiva automaticamente il saldatore quando viene alimentato [D: disattiva; S: saldatura; R: riposo; A: temperatura ambiente]"
-    },
-    "CooldownBlink": {
-      "text2": ["Avviso", "punta calda"],
-      "desc": "Evidenzia il valore di temperatura durante il raffreddamento se la punta è ancora calda"
-    },
-    "TemperatureCalibration": {
-      "text2": ["Calibrazione", "temperatura"],
-      "desc": "Calibra le rilevazioni di temperatura"
-    },
-    "SettingsReset": {
-      "text2": ["Ripristino", "impostazioni"],
-      "desc": "Ripristina le impostazioni allo stato iniziale"
-    },
-    "VoltageCalibration": {
-      "text2": ["Calibrazione", "tensione"],
-      "desc": "Calibra la tensione in ingresso; regola con entrambi i tasti, tieni premuto il tasto superiore per uscire"
-    },
-    "AdvancedSoldering": {
-      "text2": ["Dettagli", "saldatura"],
-      "desc": "Mostra informazioni dettagliate durante la modalità Saldatura"
-    },
-    "ScrollingSpeed": {
-      "text2": ["Velocità", "testo"],
-      "desc": "Imposta la velocità di scorrimento del testo [L: lenta; V: veloce]"
-    },
-    "QCMaxVoltage": {
-      "text2": ["Voltaggio", "QC"],
-      "desc": "Imposta il massimo voltaggio negoziabile con un alimentatore Quick Charge [volt]"
-    },
-    "PDNegTimeout": {
-      "text2": ["Abilitazione", "USB PD"],
-      "desc": "Regola il massimo tempo utile per la negoziazione del protocollo USB Power Delivery con alimentatori compatibili [0: disattiva; multipli di 100 ms]"
-    },
-    "PowerLimit": {
-      "text2": ["Limite", "potenza"],
-      "desc": "Imposta il valore di potenza massima erogabile al saldatore [watt]"
-    },
-    "ReverseButtonTempChange": {
-      "text2": ["Inversione", "tasti"],
-      "desc": "Inverti i tasti per aumentare o diminuire la temperatura della punta"
-    },
-    "TempChangeShortStep": {
-      "text2": ["Temp passo", "breve"],
-      "desc": "Imposta il passo dei valori di temperatura per una breve pressione dei tasti"
-    },
-    "TempChangeLongStep": {
-      "text2": ["Temp passo", "lungo"],
-      "desc": "Imposta il passo dei valori di temperatura per una lunga pressione dei tasti"
-    },
-    "PowerPulsePower": {
-      "text2": ["Potenza", "impulso"],
-      "desc": "Regola la potenza di un \"impulso sveglia\" atto a prevenire lo standby eventuale dell'alimentatore [watt]"
-    },
-    "HallEffSensitivity": {
-      "text2": ["Sensore", "Hall"],
-      "desc": "Regola la sensibilità del sensore ad effetto Hall per entrare in modalità Riposo [0: nessuna; 1: minima; 9: massima]"
-    },
-    "LockingMode": {
-      "text2": ["Blocco", "tasti"],
-      "desc": "Blocca i tasti durante la modalità Saldatura; tieni premuto entrambi per bloccare o sbloccare [D: disattiva; T: consenti Turbo; C: blocco completo]"
-    },
-    "MinVolCell": {
-      "text2": ["Tensione", "min celle"],
-      "desc": "Modifica la tensione di minima carica delle celle di una batteria Li-Po [3S: 3,0-3,7 V; 4S/5S/6S: 2,4-3,7 V]"
-    },
-    "AnimLoop": {
-      "text2": ["Ciclo", "animazioni"],
-      "desc": "Abilita la riproduzione ciclica delle animazioni del menù principale"
-    },
-    "AnimSpeed": {
-      "text2": ["Velocità", "animazioni"],
-      "desc": "Imposta la velocità di riproduzione delle animazioni del menù principale [O: OFF; L: lenta; M: media; V: veloce]"
-    },
-    "PowerPulseWait": {
-      "text2": ["Distanza", "impulsi"],
-      "desc": "Imposta il tempo che deve intercorrere tra due \"impulsi sveglia\" [multipli di 2,5 s]"
-    },
-    "PowerPulseDuration": {
-      "text2": ["Durata", "impulso"],
-      "desc": "Regola la durata dell'«impulso sveglia» [multipli di 250 ms]"
-    },
-    "LanguageSwitch": {
-      "text2": ["Lingua:", " IT Italiano"],
-      "desc": "Imposta la lingua del dispositivo"
-    },
-    "Brightness": {
-      "text2": ["Luminosità", "schermo"],
-      "desc": "Regola la luminosità dello schermo [1: minimo; 10: massimo]"
-    },
-    "ColourInversion": {
-      "text2": ["Inverti", "colori"],
-      "desc": "Inverti i colori dello schermo"
-    },
-    "LOGOTime": {
-      "text2": ["Durata", "logo"],
-      "desc": "Imposta la permanenza sullo schermo del logo iniziale [secondi]"
-    }
-  }
-}
+{
+    "languageCode": "IT",
+    "languageLocalName": "Italiano",
+    "tempUnitFahrenheit": false,
+    "messages": {
+        "SettingsCalibrationWarning": "Prima di riavvire assicurati che la punta e l'impugnatura siano a temperatura ambiente!",
+        "CJCCalibrating": "Calibrazione in corso",
+        "SettingsResetWarning": "Ripristinare le impostazioni iniziali?",
+        "UVLOWarningString": "DC BASSA",
+        "UndervoltageString": "DC INSUFFICIENTE",
+        "InputVoltageString": "V in:",
+        "SleepingSimpleString": "Zzz ",
+        "SleepingAdvancedString": "Riposo",
+        "SleepingTipAdvancedString": "Punta:",
+        "OffString": "OFF",
+        "DeviceFailedValidationWarning": "È probabile che il dispositivo in uso sia contraffatto!"
+    },
+    "messagesWarn": {
+        "CJCCalibrationDone": [
+            "Calibrazione",
+            "completata!"
+        ],
+        "ResetOKMessage": "Reset OK",
+        "SettingsResetMessage": [
+            "Impostazioni",
+            "ripristinate"
+        ],
+        "NoAccelerometerMessage": [
+            "Accelerometro",
+            "non rilevato"
+        ],
+        "NoPowerDeliveryMessage": [
+            "USB PD",
+            "non rilevato"
+        ],
+        "LockingKeysString": "Blocc.",
+        "UnlockingKeysString": "Sblocc.",
+        "WarningKeysLockedString": "BLOCCATO",
+        "WarningThermalRunaway": [
+            "Temperatura",
+            "fuori controllo"
+        ]
+    },
+    "characters": {
+        "SettingRightChar": "D",
+        "SettingLeftChar": "S",
+        "SettingAutoChar": "A",
+        "SettingOffChar": "O",
+        "SettingSlowChar": "L",
+        "SettingMediumChar": "M",
+        "SettingFastChar": "V",
+        "SettingStartNoneChar": "D",
+        "SettingStartSolderingChar": "S",
+        "SettingStartSleepChar": "R",
+        "SettingStartSleepOffChar": "A",
+        "SettingSensitivityOff": "O",
+        "SettingSensitivityLow": "B",
+        "SettingSensitivityMedium": "M",
+        "SettingSensitivityHigh": "A",
+        "SettingLockDisableChar": "D",
+        "SettingLockBoostChar": "T",
+        "SettingLockFullChar": "C"
+    },
+    "menuGroups": {
+        "PowerMenu": {
+            "text2": [
+                "Opzioni",
+                "alimentaz"
+            ],
+            "desc": ""
+        },
+        "SolderingMenu": {
+            "text2": [
+                "Opzioni",
+                "saldatura"
+            ],
+            "desc": ""
+        },
+        "PowerSavingMenu": {
+            "text2": [
+                "Risparmio",
+                "energetico"
+            ],
+            "desc": ""
+        },
+        "UIMenu": {
+            "text2": [
+                "Interfaccia",
+                "utente"
+            ],
+            "desc": ""
+        },
+        "AdvancedMenu": {
+            "text2": [
+                "Opzioni",
+                "avanzate"
+            ],
+            "desc": ""
+        }
+    },
+    "menuOptions": {
+        "DCInCutoff": {
+            "text2": [
+                "Sorgente",
+                "alimentaz"
+            ],
+            "desc": "Imposta una tensione minima di alimentazione attraverso la selezione di una sorgente [DC: 10 V; 3S/4S/5S/6S: 3,3 V per cella]"
+        },
+        "MinVolCell": {
+            "text2": [
+                "Tensione",
+                "min celle"
+            ],
+            "desc": "Modifica la tensione di minima carica delle celle di una batteria Li-Po [3S: 3,0-3,7 V; 4S/5S/6S: 2,4-3,7 V]"
+        },
+        "QCMaxVoltage": {
+            "text2": [
+                "Voltaggio",
+                "QC"
+            ],
+            "desc": "Imposta il massimo voltaggio negoziabile con un alimentatore Quick Charge [volt]"
+        },
+        "PDNegTimeout": {
+            "text2": [
+                "Abilitazione",
+                "USB PD"
+            ],
+            "desc": "Regola il massimo tempo utile per la negoziazione del protocollo USB Power Delivery con alimentatori compatibili [0: disattiva; multipli di 100 ms]"
+        },
+        "BoostTemperature": {
+            "text2": [
+                "Temp",
+                "Turbo"
+            ],
+            "desc": "Imposta la temperatura della funzione Turbo [°C/°F]"
+        },
+        "AutoStart": {
+            "text2": [
+                "Avvio",
+                "automatico"
+            ],
+            "desc": "Attiva automaticamente il saldatore quando viene alimentato [D: disattiva; S: saldatura; R: riposo; A: temperatura ambiente]"
+        },
+        "TempChangeShortStep": {
+            "text2": [
+                "Temp passo",
+                "breve"
+            ],
+            "desc": "Imposta il passo dei valori di temperatura per una breve pressione dei tasti"
+        },
+        "TempChangeLongStep": {
+            "text2": [
+                "Temp passo",
+                "lungo"
+            ],
+            "desc": "Imposta il passo dei valori di temperatura per una lunga pressione dei tasti"
+        },
+        "LockingMode": {
+            "text2": [
+                "Blocco",
+                "tasti"
+            ],
+            "desc": "Blocca i tasti durante la modalità Saldatura; tieni premuto entrambi per bloccare o sbloccare [D: disattiva; T: consenti Turbo; C: blocco completo]"
+        },
+        "MotionSensitivity": {
+            "text2": [
+                "Sensibilità",
+                "al movimento"
+            ],
+            "desc": "Imposta la sensibilità al movimento per uscire dalla modalità Riposo [0: nessuna; 1: minima; 9: massima]"
+        },
+        "SleepTemperature": {
+            "text2": [
+                "Temp",
+                "riposo"
+            ],
+            "desc": "Imposta la temperatura da mantenere in modalità Riposo [°C/°F]"
+        },
+        "SleepTimeout": {
+            "text2": [
+                "Timer",
+                "riposo"
+            ],
+            "desc": "Imposta il timer per entrare in modalità Riposo [secondi/minuti]"
+        },
+        "ShutdownTimeout": {
+            "text2": [
+                "Timer",
+                "spegnimento"
+            ],
+            "desc": "Imposta il timer per lo spegnimento [minuti]"
+        },
+        "HallEffSensitivity": {
+            "text2": [
+                "Sensore",
+                "Hall"
+            ],
+            "desc": "Regola la sensibilità del sensore ad effetto Hall per entrare in modalità Riposo [0: nessuna; 1: minima; 9: massima]"
+        },
+        "TemperatureUnit": {
+            "text2": [
+                "Unità di",
+                "temperatura"
+            ],
+            "desc": "Scegli l'unità di misura per la temperatura [C: grado Celsius; F: grado Farenheit]"
+        },
+        "DisplayRotation": {
+            "text2": [
+                "Orientamento",
+                "schermo"
+            ],
+            "desc": "Imposta l'orientamento dello schermo [D: mano destra; S: mano sinistra; A: automatico]"
+        },
+        "CooldownBlink": {
+            "text2": [
+                "Avviso",
+                "punta calda"
+            ],
+            "desc": "Evidenzia il valore di temperatura durante il raffreddamento se la punta è ancora calda"
+        },
+        "ScrollingSpeed": {
+            "text2": [
+                "Velocità",
+                "testo"
+            ],
+            "desc": "Imposta la velocità di scorrimento del testo [L: lenta; V: veloce]"
+        },
+        "ReverseButtonTempChange": {
+            "text2": [
+                "Inversione",
+                "tasti"
+            ],
+            "desc": "Inverti i tasti per aumentare o diminuire la temperatura della punta"
+        },
+        "AnimSpeed": {
+            "text2": [
+                "Velocità",
+                "animazioni"
+            ],
+            "desc": "Imposta la velocità di riproduzione delle animazioni del menù principale [O: OFF; L: lenta; M: media; V: veloce]"
+        },
+        "AnimLoop": {
+            "text2": [
+                "Ciclo",
+                "animazioni"
+            ],
+            "desc": "Abilita la riproduzione ciclica delle animazioni del menù principale"
+        },
+        "Brightness": {
+            "text2": [
+                "Luminosità",
+                "schermo"
+            ],
+            "desc": "Regola la luminosità dello schermo [1: minimo; 10: massimo]"
+        },
+        "ColourInversion": {
+            "text2": [
+                "Inverti",
+                "colori"
+            ],
+            "desc": "Inverti i colori dello schermo"
+        },
+        "LOGOTime": {
+            "text2": [
+                "Durata",
+                "logo"
+            ],
+            "desc": "Imposta la permanenza sullo schermo del logo iniziale [secondi]"
+        },
+        "AdvancedIdle": {
+            "text2": [
+                "Interfaccia",
+                "testuale"
+            ],
+            "desc": "Mostra informazioni dettagliate all'interno della schermata principale"
+        },
+        "AdvancedSoldering": {
+            "text2": [
+                "Dettagli",
+                "saldatura"
+            ],
+            "desc": "Mostra informazioni dettagliate durante la modalità Saldatura"
+        },
+        "PowerLimit": {
+            "text2": [
+                "Limite",
+                "potenza"
+            ],
+            "desc": "Imposta il valore di potenza massima erogabile al saldatore [watt]"
+        },
+        "CalibrateCJC": {
+            "text2": [
+                "Calibra T",
+                "all'avvio"
+            ],
+            "desc": "Calibra le rilevazioni di temperatura al prossimo riavvio (non necessario se il Delta T<5 °C)"
+        },
+        "VoltageCalibration": {
+            "text2": [
+                "Calibrazione",
+                "tensione"
+            ],
+            "desc": "Calibra la tensione in ingresso; regola con entrambi i tasti, tieni premuto il tasto superiore per uscire"
+        },
+        "PowerPulsePower": {
+            "text2": [
+                "Potenza",
+                "impulso"
+            ],
+            "desc": "Regola la potenza di un \"impulso sveglia\" atto a prevenire lo standby eventuale dell'alimentatore [watt]"
+        },
+        "PowerPulseWait": {
+            "text2": [
+                "Distanza",
+                "impulsi"
+            ],
+            "desc": "Imposta il tempo che deve intercorrere tra due \"impulsi sveglia\" [multipli di 2,5 s]"
+        },
+        "PowerPulseDuration": {
+            "text2": [
+                "Durata",
+                "impulso"
+            ],
+            "desc": "Regola la durata dell'«impulso sveglia» [multipli di 250 ms]"
+        },
+        "SettingsReset": {
+            "text2": [
+                "Ripristino",
+                "impostazioni"
+            ],
+            "desc": "Ripristina le impostazioni allo stato iniziale"
+        },
+        "LanguageSwitch": {
+            "text2": [
+                "Lingua:",
+                " IT    Italiano"
+            ],
+            "desc": ""
+        }
+    }
+}

Translations/translation_JA_JP.json

@@ -1,207 +1,212 @@
-{
-  "languageCode": "JA_JP",
-  "languageLocalName": "日本語",
-  "fonts": ["ascii_basic", "cjk"],
-  "tempUnitFahrenheit": true,
-  "messages": {
-    "SettingsCalibrationWarning": "続行する前に、コテ先が室温と同じになっていることを確認してください",
-    "SettingsResetWarning": "設定をリセットしますか？",
-    "UVLOWarningString": "電圧が低すぎます",
-    "UndervoltageString": "Undervoltage",
-    "InputVoltageString": "Input V: ",
-    "SleepingSimpleString": "Zzzz",
-    "SleepingAdvancedString": "Sleeping...",
-    "SleepingTipAdvancedString": "Tip:",
-    "OffString": "オフ"
-  },
-  "messagesWarn": {
-    "ResetOKMessage": "リセットOK",
-    "SettingsResetMessage": "初期化されました",
-    "NoAccelerometerMessage": "加速度計未検出",
-    "NoPowerDeliveryMessage": "PD IC未検出",
-    "LockingKeysString": "ボタンロック",
-    "UnlockingKeysString": "ロックを解除",
-    "WarningKeysLockedString": "!入力ロック中!",
-    "WarningThermalRunaway": "過熱"
-  },
-  "characters": {
-    "SettingRightChar": "右",
-    "SettingLeftChar": "左",
-    "SettingAutoChar": "自",
-    "SettingOffChar": "×",
-    "SettingSlowChar": "遅",
-    "SettingMediumChar": "中",
-    "SettingFastChar": "速",
-    "SettingStartNoneChar": "×",
-    "SettingStartSolderingChar": "熱",
-    "SettingStartSleepChar": "待",
-    "SettingStartSleepOffChar": "室",
-    "SettingSensitivityOff": "×",
-    "SettingSensitivityLow": "低",
-    "SettingSensitivityMedium": "中",
-    "SettingSensitivityHigh": "高",
-    "SettingLockDisableChar": "×",
-    "SettingLockBoostChar": "ブ",
-    "SettingLockFullChar": "全"
-  },
-  "menuGroups": {
-    "PowerMenu": {
-      "text2": "電源設定",
-      "desc": "電源設定"
-    },
-    "SolderingMenu": {
-      "text2": "半田付け設定",
-      "desc": "半田付け設定"
-    },
-    "PowerSavingMenu": {
-      "text2": "待機設定",
-      "desc": "待機設定"
-    },
-    "UIMenu": {
-      "text2": "UI設定",
-      "desc": "ユーザーインターフェイスの設定"
-    },
-    "AdvancedMenu": {
-      "text2": "高度な設定",
-      "desc": "高度な設定"
-    }
-  },
-  "menuOptions": {
-    "DCInCutoff": {
-      "text2": "下限電圧",
-      "desc": "下限電圧を指定する <DC=10V | S=セルあたり3.3V、電力制限を無効化>"
-    },
-    "SleepTemperature": {
-      "text2": "待機温度",
-      "desc": "スタンバイ時のコテ先温度"
-    },
-    "SleepTimeout": {
-      "text2": "待機遅延",
-      "desc": "スタンバイモードに入るまでの待機時間 <s=秒 | m=分>"
-    },
-    "ShutdownTimeout": {
-      "text2": "自動オフ",
-      "desc": "自動電源オフまでの待機時間 <m=分>"
-    },
-    "MotionSensitivity": {
-      "text2": "動きの感度",
-      "desc": "0=オフ | 1=最低感度 | ... | 9=最高感度"
-    },
-    "TemperatureUnit": {
-      "text2": "温度単位",
-      "desc": "C=摂氏 | F=華氏"
-    },
-    "AdvancedIdle": {
-      "text2": "詳細な待受画面",
-      "desc": "待ち受け画面に詳細情報を表示する"
-    },
-    "DisplayRotation": {
-      "text2": "画面の向き",
-      "desc": "右=右利き | 左=左利き | 自=自動"
-    },
-    "BoostTemperature": {
-      "text2": "ブースト温度",
-      "desc": "ブーストモードで使用される温度"
-    },
-    "AutoStart": {
-      "text2": "自動加熱",
-      "desc": "電源投入時に自動的に加熱する <×=オフ | 熱=半田付けモード | 待=スタンバイモード | 室=室温スタンバイモード>"
-    },
-    "CooldownBlink": {
-      "text2": "冷却中に点滅",
-      "desc": "加熱の停止後、コテ先が熱い間は温度表示を点滅する"
-    },
-    "TemperatureCalibration": {
-      "text2": "温度校正",
-      "desc": "コテ先の温度校正を開始する"
-    },
-    "SettingsReset": {
-      "text2": "設定をリセット",
-      "desc": "すべての設定を初期化する"
-    },
-    "VoltageCalibration": {
-      "text2": "電圧校正",
-      "desc": "入力電圧(VIN)の校正を開始する <長押しで終了>"
-    },
-    "AdvancedSoldering": {
-      "text2": "詳細な作業画面",
-      "desc": "半田付け画面に詳細情報を表示する"
-    },
-    "ScrollingSpeed": {
-      "text2": "スクロール速度",
-      "desc": "テキストをスクロールする速さ <遅=遅い | 速=速い>"
-    },
-    "QCMaxVoltage": {
-      "text2": "QC電圧",
-      "desc": "QC電源使用時に要求する目標電圧"
-    },
-    "PDNegTimeout": {
-      "text2": ["PD", "timeout"],
-      "desc": "一部のQC電源との互換性のため、PDネゴシエーションをタイムアウトする時間 <x100ms（ミリ秒）>"
-    },
-    "PowerLimit": {
-      "text2": "電力制限",
-      "desc": "最大電力を制限する <W=ワット>"
-    },
-    "ReverseButtonTempChange": {
-      "text2": "キー入れ替え",
-      "desc": "温度設定時に+ボタンと-ボタンを入れ替える"
-    },
-    "TempChangeShortStep": {
-      "text2": "温度変化 短",
-      "desc": "ボタンを短く押した時の温度変化値"
-    },
-    "TempChangeLongStep": {
-      "text2": "温度変化 長",
-      "desc": "ボタンを長押しした時の温度変化値"
-    },
-    "PowerPulsePower": {
-      "text2": "電力パルス",
-      "desc": "電源をオンに保つための電力パルス <ワット>"
-    },
-    "HallEffSensitivity": {
-      "text2": "磁界感度",
-      "desc": "スタンバイモードに入るのに使用される磁場センサーの感度 <0=オフ | 1=最低感度 | ... | 9=最高感度>"
-    },
-    "LockingMode": {
-      "text2": "ボタンロック",
-      "desc": "半田付けモード時に両方のボタンを長押しし、ボタンロックする <×=オフ | ブ=ブーストのみ許可 | 全=すべてをロック>"
-    },
-    "MinVolCell": {
-      "text2": "最低電圧",
-      "desc": "セルあたりの最低電圧 <ボルト> <3S: 3.0V - 3.7V, 4/5/6S: 2.4V - 3.7V>"
-    },
-    "AnimLoop": {
-      "text2": "動画をループ",
-      "desc": "メニューアイコンのアニメーションをループする"
-    },
-    "AnimSpeed": {
-      "text2": "動画の速度",
-      "desc": "メニューアイコンのアニメーションの速さ <×=再生しない | 遅=低速 | 中=中速 | 速=高速>"
-    },
-    "PowerPulseWait": {
-      "text2": "パルス間隔",
-      "desc": "電源をオンに保つための電力パルスの時間間隔 <x2.5s（秒）>"
-    },
-    "PowerPulseDuration": {
-      "text2": "パルス時間長",
-      "desc": "電源をオンに保つための電力パルスの時間長 <x250ms（ミリ秒）>"
-    },
-    "LanguageSwitch": {
-      "text2": "言語： 日本語",
-      "desc": ""
-    },
-    "Brightness": {
-      "text2": "画面輝度",
-      "desc": "画面の明るさ・コントラストを変更する"
-    },
-    "ColourInversion": {
-      "text2": "色反転",
-      "desc": "画面の色を反転する"
-    },
-    "LOGOTime": {
-      "text2": ["Boot logo", "duration"],
-      "desc": "Sets the duration for the boot logo (s=seconds)"
-    }
-  }
-}
+{
+    "languageCode": "JA_JP",
+    "languageLocalName": "日本語",
+    "tempUnitFahrenheit": true,
+    "messages": {
+        "SettingsCalibrationWarning": "Before rebooting, make sure tip & handle are at room temperature!",
+        "CJCCalibrating": "calibrating",
+        "SettingsResetWarning": "設定をリセットしますか？",
+        "UVLOWarningString": "電圧が低すぎます",
+        "UndervoltageString": "Undervoltage",
+        "InputVoltageString": "Input V: ",
+        "SleepingSimpleString": "Zzzz",
+        "SleepingAdvancedString": "Sleeping...",
+        "SleepingTipAdvancedString": "Tip:",
+        "OffString": "オフ",
+        "DeviceFailedValidationWarning": "このデバイスはおそらく偽造品です"
+    },
+    "messagesWarn": {
+        "CJCCalibrationDone": "Calibration done!",
+        "ResetOKMessage": "リセットOK",
+        "SettingsResetMessage": "初期化されました",
+        "NoAccelerometerMessage": "加速度計未検出",
+        "NoPowerDeliveryMessage": "PD IC未検出",
+        "LockingKeysString": "ボタンロック",
+        "UnlockingKeysString": "ロックを解除",
+        "WarningKeysLockedString": "!入力ロック中!",
+        "WarningThermalRunaway": "過熱"
+    },
+    "characters": {
+        "SettingRightChar": "右",
+        "SettingLeftChar": "左",
+        "SettingAutoChar": "自",
+        "SettingOffChar": "×",
+        "SettingSlowChar": "遅",
+        "SettingMediumChar": "中",
+        "SettingFastChar": "速",
+        "SettingStartNoneChar": "×",
+        "SettingStartSolderingChar": "熱",
+        "SettingStartSleepChar": "待",
+        "SettingStartSleepOffChar": "室",
+        "SettingSensitivityOff": "×",
+        "SettingSensitivityLow": "低",
+        "SettingSensitivityMedium": "中",
+        "SettingSensitivityHigh": "高",
+        "SettingLockDisableChar": "×",
+        "SettingLockBoostChar": "ブ",
+        "SettingLockFullChar": "全"
+    },
+    "menuGroups": {
+        "PowerMenu": {
+            "text2": "電源設定",
+            "desc": ""
+        },
+        "SolderingMenu": {
+            "text2": "半田付け設定",
+            "desc": ""
+        },
+        "PowerSavingMenu": {
+            "text2": "待機設定",
+            "desc": ""
+        },
+        "UIMenu": {
+            "text2": "UI設定",
+            "desc": ""
+        },
+        "AdvancedMenu": {
+            "text2": "高度な設定",
+            "desc": ""
+        }
+    },
+    "menuOptions": {
+        "DCInCutoff": {
+            "text2": "下限電圧",
+            "desc": "下限電圧を指定する <DC=10V | S=セルあたり3.3V、電力制限を無効化>"
+        },
+        "MinVolCell": {
+            "text2": "最低電圧",
+            "desc": "セルあたりの最低電圧 <ボルト> <3S: 3.0V - 3.7V, 4/5/6S: 2.4V - 3.7V>"
+        },
+        "QCMaxVoltage": {
+            "text2": "QC電圧",
+            "desc": "QC電源使用時に要求する目標電圧"
+        },
+        "PDNegTimeout": {
+            "text2": [
+                "PD",
+                "timeout"
+            ],
+            "desc": "一部のQC電源との互換性のため、PDネゴシエーションをタイムアウトする時間 <x100ms（ミリ秒）>"
+        },
+        "BoostTemperature": {
+            "text2": "ブースト温度",
+            "desc": "ブーストモードで使用される温度"
+        },
+        "AutoStart": {
+            "text2": "自動加熱",
+            "desc": "電源投入時に自動的に加熱する <×=オフ | 熱=半田付けモード | 待=スタンバイモード | 室=室温スタンバイモード>"
+        },
+        "TempChangeShortStep": {
+            "text2": "温度変化 短",
+            "desc": "ボタンを短く押した時の温度変化値"
+        },
+        "TempChangeLongStep": {
+            "text2": "温度変化 長",
+            "desc": "ボタンを長押しした時の温度変化値"
+        },
+        "LockingMode": {
+            "text2": "ボタンロック",
+            "desc": "半田付けモード時に両方のボタンを長押しし、ボタンロックする <×=オフ | ブ=ブーストのみ許可 | 全=すべてをロック>"
+        },
+        "MotionSensitivity": {
+            "text2": "動きの感度",
+            "desc": "0=オフ | 1=最低感度 | ... | 9=最高感度"
+        },
+        "SleepTemperature": {
+            "text2": "待機温度",
+            "desc": "スタンバイ時のコテ先温度"
+        },
+        "SleepTimeout": {
+            "text2": "待機遅延",
+            "desc": "スタンバイモードに入るまでの待機時間 <s=秒 | m=分>"
+        },
+        "ShutdownTimeout": {
+            "text2": "自動オフ",
+            "desc": "自動電源オフまでの待機時間 <m=分>"
+        },
+        "HallEffSensitivity": {
+            "text2": "磁界感度",
+            "desc": "スタンバイモードに入るのに使用される磁場センサーの感度 <0=オフ | 1=最低感度 | ... | 9=最高感度>"
+        },
+        "TemperatureUnit": {
+            "text2": "温度単位",
+            "desc": "C=摂氏 | F=華氏"
+        },
+        "DisplayRotation": {
+            "text2": "画面の向き",
+            "desc": "右=右利き | 左=左利き | 自=自動"
+        },
+        "CooldownBlink": {
+            "text2": "冷却中に点滅",
+            "desc": "加熱の停止後、コテ先が熱い間は温度表示を点滅する"
+        },
+        "ScrollingSpeed": {
+            "text2": "スクロール速度",
+            "desc": "テキストをスクロールする速さ <遅=遅い | 速=速い>"
+        },
+        "ReverseButtonTempChange": {
+            "text2": "キー入れ替え",
+            "desc": "温度設定時に+ボタンと-ボタンを入れ替える"
+        },
+        "AnimSpeed": {
+            "text2": "動画の速度",
+            "desc": "メニューアイコンのアニメーションの速さ <×=再生しない | 遅=低速 | 中=中速 | 速=高速>"
+        },
+        "AnimLoop": {
+            "text2": "動画をループ",
+            "desc": "メニューアイコンのアニメーションをループする"
+        },
+        "Brightness": {
+            "text2": "画面輝度",
+            "desc": "画面の明るさ・コントラストを変更する"
+        },
+        "ColourInversion": {
+            "text2": "色反転",
+            "desc": "画面の色を反転する"
+        },
+        "LOGOTime": {
+            "text2": "起動画面",
+            "desc": "起動画面の表示時間を設定する"
+        },
+        "AdvancedIdle": {
+            "text2": "詳細な待受画面",
+            "desc": "待ち受け画面に詳細情報を表示する"
+        },
+        "AdvancedSoldering": {
+            "text2": "詳細な作業画面",
+            "desc": "半田付け画面に詳細情報を表示する"
+        },
+        "PowerLimit": {
+            "text2": "電力制限",
+            "desc": "最大電力を制限する <W=ワット>"
+        },
+        "CalibrateCJC": {
+            "text2": "Calibrate CJC",
+            "desc": "At next boot tip Cold Junction Compensation will be calibrated (not required if Delta T is < 5 C)"
+        },
+        "VoltageCalibration": {
+            "text2": "電圧校正",
+            "desc": "入力電圧(VIN)の校正を開始する <長押しで終了>"
+        },
+        "PowerPulsePower": {
+            "text2": "電力パルス",
+            "desc": "電源をオンに保つための電力パルス <ワット>"
+        },
+        "PowerPulseWait": {
+            "text2": "パルス間隔",
+            "desc": "電源をオンに保つための電力パルスの時間間隔 <x2.5s（秒）>"
+        },
+        "PowerPulseDuration": {
+            "text2": "パルス時間長",
+            "desc": "電源をオンに保つための電力パルスの時間長 <x250ms（ミリ秒）>"
+        },
+        "SettingsReset": {
+            "text2": "設定をリセット",
+            "desc": "すべての設定を初期化する"
+        },
+        "LanguageSwitch": {
+            "text2": "言語： 日本語",
+            "desc": ""
+        }
+    }
+}

Translations/translation_LT.json

@@ -1,207 +1,341 @@
-{
-  "languageCode": "LT",
-  "languageLocalName": "Lietuvių",
-  "fonts": ["ascii_basic", "latin_extended"],
-  "tempUnitFahrenheit": false,
-  "messages": {
-    "SettingsCalibrationWarning": "Prieš tęsdami įsitikinkite, kad antgalis yra kambario temperatūros!",
-    "SettingsResetWarning": "Ar norite atstatyti nustatymus į numatytas reikšmes?",
-    "UVLOWarningString": "MAŽ VOLT",
-    "UndervoltageString": "Žema įtampa",
-    "InputVoltageString": "Įvestis V: ",
-    "SleepingSimpleString": "Zzzz",
-    "SleepingAdvancedString": "Miegu...",
-    "SleepingTipAdvancedString": "Antg:",
-    "OffString": "Išj"
-  },
-  "messagesWarn": {
-    "ResetOKMessage": "Atstatyta",
-    "SettingsResetMessage": ["Nust. atstatyti!", ""],
-    "NoAccelerometerMessage": ["Nerastas", "akselerometras!"],
-    "NoPowerDeliveryMessage": ["Nerastas", "USB-PD IC!"],
-    "LockingKeysString": "UŽRAKIN",
-    "UnlockingKeysString": "ATRAKIN",
-    "WarningKeysLockedString": "!UŽRAK!",
-    "WarningThermalRunaway": ["Perkaitimo", "pavojus"]
-  },
-  "characters": {
-    "SettingRightChar": "D",
-    "SettingLeftChar": "K",
-    "SettingAutoChar": "A",
-    "SettingOffChar": "I",
-    "SettingSlowChar": "L",
-    "SettingMediumChar": "V",
-    "SettingFastChar": "G",
-    "SettingStartNoneChar": "N",
-    "SettingStartSolderingChar": "T",
-    "SettingStartSleepChar": "M",
-    "SettingStartSleepOffChar": "K",
-    "SettingSensitivityOff": "I",
-    "SettingSensitivityLow": "Ž",
-    "SettingSensitivityMedium": "V",
-    "SettingSensitivityHigh": "A",
-    "SettingLockDisableChar": "I",
-    "SettingLockBoostChar": "T",
-    "SettingLockFullChar": "V"
-  },
-  "menuGroups": {
-    "PowerMenu": {
-      "text2": ["Maitinimo", "nustatymai"],
-      "desc": "Su maitinblokiu susiję nustatymai"
-    },
-    "SolderingMenu": {
-      "text2": ["Litavimo", "nustatymai"],
-      "desc": "Litavimo nustatymai"
-    },
-    "PowerSavingMenu": {
-      "text2": ["Miego", "režimai"],
-      "desc": "Energijos tausojimo nustatymai"
-    },
-    "UIMenu": {
-      "text2": ["Naudotojo", "sąsaja"],
-      "desc": "Naudotojo sąsajos nustatymai"
-    },
-    "AdvancedMenu": {
-      "text2": ["Išplėsti.", "nustatymai"],
-      "desc": "Išplėstiniai nustatymai"
-    }
-  },
-  "menuOptions": {
-    "DCInCutoff": {
-      "text2": ["Maitinimo", "šaltinis"],
-      "desc": "Išjungimo įtampa. (DC 10V) (arba celių [S] kiekis [3.3V per celę])"
-    },
-    "SleepTemperature": {
-      "text2": ["Miego", "temperat."],
-      "desc": "Antgalio temperatūra miego režimu"
-    },
-    "SleepTimeout": {
-      "text2": ["Miego", "laikas"],
-      "desc": "Užmigimo laikas (sekundės | minutės)"
-    },
-    "ShutdownTimeout": {
-      "text2": ["Išjungimo", "laikas"],
-      "desc": "Išjungimo laikas (minutės)"
-    },
-    "MotionSensitivity": {
-      "text2": ["Judesio", "jautrumas"],
-      "desc": "Judesio jautrumas (0=Išjungta | 1=Mažiausias | ... | 9=Didžiausias)"
-    },
-    "TemperatureUnit": {
-      "text2": ["Temperatūros", "vienetai"],
-      "desc": "Temperatūros vienetai (C=Celsijus | F=Farenheitas)"
-    },
-    "AdvancedIdle": {
-      "text2": ["Detalus lau-", "kimo ekranas"],
-      "desc": "Ar rodyti papildomą informaciją mažesniu šriftu laukimo ekrane"
-    },
-    "DisplayRotation": {
-      "text2": ["Ekrano", "orientacija"],
-      "desc": "Ekrano orientacija (D=Dešiniarankiams | K=Kairiarankiams | A=Automatinė)"
-    },
-    "BoostTemperature": {
-      "text2": ["Turbo", "temperat."],
-      "desc": "Temperatūra turbo režimu"
-    },
-    "AutoStart": {
-      "text2": ["Automatinis", "paleidimas"],
-      "desc": "Ar pradėti kaitininti iš karto įjungus lituoklį (N=Ne | T=Taip | M=Miegas | K=Miegoti kambario temperatūroje)"
-    },
-    "CooldownBlink": {
-      "text2": ["Atvėsimo", "mirksėjimas"],
-      "desc": "Ar mirksėti temperatūrą ekrane kol vėstantis antgalis vis dar karštas?"
-    },
-    "TemperatureCalibration": {
-      "text2": ["Kalibruoti", "temperatūrą?"],
-      "desc": "Antgalio temperatūros kalibravimas"
-    },
-    "SettingsReset": {
-      "text2": ["Atstatyti", "nustatymus?"],
-      "desc": "Nustato nustatymus į numatytuosius"
-    },
-    "VoltageCalibration": {
-      "text2": ["Kalibruoti", "įvesties įtampą?"],
-      "desc": "Įvesties įtampos kalibravimas. Trumpai paspauskite, norėdami nustatyti, ilgai paspauskite, kad išeitumėte."
-    },
-    "AdvancedSoldering": {
-      "text2": ["Detalus lita-", "vimo ekranas"],
-      "desc": "Ar rodyti išsamią informaciją lituojant"
-    },
-    "ScrollingSpeed": {
-      "text2": ["Aprašymo", "greitis"],
-      "desc": "Greitis, kuriuo šis tekstas slenka"
-    },
-    "QCMaxVoltage": {
-      "text2": ["QC mait.", "įtampa"],
-      "desc": "Maksimali QC maitinimo bloko įtampa"
-    },
-    "PDNegTimeout": {
-      "text2": ["PD", "laikas"],
-      "desc": "PD suderinimo laikas žingsniais po 100ms suderinamumui su kai kuriais QC įkrovikliais"
-    },
-    "PowerLimit": {
-      "text2": ["Galios", "riba"],
-      "desc": "Didžiausia galia, kurią gali naudoti lituoklis (Vatai)"
-    },
-    "ReverseButtonTempChange": {
-      "text2": ["Sukeisti + -", "mygtukus?"],
-      "desc": "Sukeisti + - temperatūros keitimo mygtukus vietomis"
-    },
-    "TempChangeShortStep": {
-      "text2": ["Temp.keitim.", "trump.spust."],
-      "desc": "Temperatūros keitimo žingsnis trumpai spustėlėjus mygtuką"
-    },
-    "TempChangeLongStep": {
-      "text2": ["Temp.keitim.", "ilgas pasp."],
-      "desc": "Temperatūros keitimo žingsnis ilgai paspaudus mygtuką"
-    },
-    "PowerPulsePower": {
-      "text2": ["Galios", "pulso W"],
-      "desc": "Periodinis galios pulso intensyvumas maitinblokiui, neleidžiantis jam užmigti."
-    },
-    "HallEffSensitivity": {
-      "text2": ["Holo", "jutiklis"],
-      "desc": "Holo jutiklio jautrumas nustatant miegą (0=Išjungta | 1=Mažiausias | ... | 9=Didžiausias)"
-    },
-    "LockingMode": {
-      "text2": ["Mygtukų", "užraktas"],
-      "desc": "Lituodami, ilgai paspauskite abu mygtukus, kad juos užrakintumėte (I=Išjungta | T=leidžiamas tik Turbo režimas | V=Visiškas užrakinimas)"
-    },
-    "MinVolCell": {
-      "text2": ["Minimalus", "voltažas"],
-      "desc": "Minimalus voltažas, kuris yra leidžiamas kiekvienam baterijos elementui (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)"
-    },
-    "AnimLoop": {
-      "text2": ["Animacijų", "pakartojimas"],
-      "desc": "Leidžia kartoti animacijas be sustojimo pagrindiniame meniu"
-    },
-    "AnimSpeed": {
-      "text2": ["Animacijų", "greitis"],
-      "desc": "Paveiksliukų animacijų greitis meniu punktuose (I=Išjungtas | L=Lėtas | V=Vidutinis | G=Greitas)"
-    },
-    "PowerPulseWait": {
-      "text2": ["Galios pulso", "dažnumas"],
-      "desc": "Pasikartojantis laiko intervalas (x 2.5s), ties kuriuo kartojamas galios pulsas maitinblokiui, neleidžiantis jam užmigti"
-    },
-    "PowerPulseDuration": {
-      "text2": ["Galios pulso", "trukmė"],
-      "desc": "Galios pulso aktyvioji trukmė (x 250ms)"
-    },
-    "LanguageSwitch": {
-      "text2": ["Kalba:", " LT    Lietuvių"],
-      "desc": "Dabartinė programinės įrangos kalba"
-    },
-    "Brightness": {
-      "text2": ["Ekrano", "šviesumas"],
-      "desc": "Nustato OLED ekrano kontrastą/šviesumą."
-    },
-    "ColourInversion": {
-      "text2": ["Ekrano", "invertavimas"],
-      "desc": "Invertuoja OLED ekrano spalvas"
-    },
-    "LOGOTime": {
-      "text2": ["Boot logo", "duration"],
-      "desc": "Sets the duration for the boot logo (s=seconds)"
-    }
-  }
-}
+{
+    "languageCode": "LT",
+    "languageLocalName": "Lietuvių",
+    "tempUnitFahrenheit": false,
+    "messages": {
+        "SettingsCalibrationWarning": "Before rebooting, make sure tip & handle are at room temperature!",
+        "CJCCalibrating": "calibrating",
+        "SettingsResetWarning": "Ar norite atstatyti nustatymus į numatytas reikšmes?",
+        "UVLOWarningString": "MAŽ VOLT",
+        "UndervoltageString": "Žema įtampa",
+        "InputVoltageString": "Įvestis V: ",
+        "SleepingSimpleString": "Zzzz",
+        "SleepingAdvancedString": "Miegu...",
+        "SleepingTipAdvancedString": "Antg:",
+        "OffString": "Išj",
+        "DeviceFailedValidationWarning": "Your device is most likely a counterfeit!"
+    },
+    "messagesWarn": {
+        "CJCCalibrationDone": [
+            "Calibration",
+            "done!"
+        ],
+        "ResetOKMessage": "Atstatyta",
+        "SettingsResetMessage": [
+            "Nust. atstatyti!",
+            ""
+        ],
+        "NoAccelerometerMessage": [
+            "Nerastas",
+            "akselerometras!"
+        ],
+        "NoPowerDeliveryMessage": [
+            "Nerastas",
+            "USB-PD IC!"
+        ],
+        "LockingKeysString": "UŽRAKIN",
+        "UnlockingKeysString": "ATRAKIN",
+        "WarningKeysLockedString": "!UŽRAK!",
+        "WarningThermalRunaway": [
+            "Perkaitimo",
+            "pavojus"
+        ]
+    },
+    "characters": {
+        "SettingRightChar": "D",
+        "SettingLeftChar": "K",
+        "SettingAutoChar": "A",
+        "SettingOffChar": "I",
+        "SettingSlowChar": "L",
+        "SettingMediumChar": "V",
+        "SettingFastChar": "G",
+        "SettingStartNoneChar": "N",
+        "SettingStartSolderingChar": "T",
+        "SettingStartSleepChar": "M",
+        "SettingStartSleepOffChar": "K",
+        "SettingSensitivityOff": "I",
+        "SettingSensitivityLow": "Ž",
+        "SettingSensitivityMedium": "V",
+        "SettingSensitivityHigh": "A",
+        "SettingLockDisableChar": "I",
+        "SettingLockBoostChar": "T",
+        "SettingLockFullChar": "V"
+    },
+    "menuGroups": {
+        "PowerMenu": {
+            "text2": [
+                "Maitinimo",
+                "nustatymai"
+            ],
+            "desc": ""
+        },
+        "SolderingMenu": {
+            "text2": [
+                "Litavimo",
+                "nustatymai"
+            ],
+            "desc": ""
+        },
+        "PowerSavingMenu": {
+            "text2": [
+                "Miego",
+                "režimai"
+            ],
+            "desc": ""
+        },
+        "UIMenu": {
+            "text2": [
+                "Naudotojo",
+                "sąsaja"
+            ],
+            "desc": ""
+        },
+        "AdvancedMenu": {
+            "text2": [
+                "Išplėsti.",
+                "nustatymai"
+            ],
+            "desc": ""
+        }
+    },
+    "menuOptions": {
+        "DCInCutoff": {
+            "text2": [
+                "Maitinimo",
+                "šaltinis"
+            ],
+            "desc": "Išjungimo įtampa. (DC 10V) (arba celių [S] kiekis [3.3V per celę])"
+        },
+        "MinVolCell": {
+            "text2": [
+                "Minimalus",
+                "voltažas"
+            ],
+            "desc": "Minimalus voltažas, kuris yra leidžiamas kiekvienam baterijos elementui (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)"
+        },
+        "QCMaxVoltage": {
+            "text2": [
+                "QC mait.",
+                "įtampa"
+            ],
+            "desc": "Maksimali QC maitinimo bloko įtampa"
+        },
+        "PDNegTimeout": {
+            "text2": [
+                "PD",
+                "laikas"
+            ],
+            "desc": "PD suderinimo laikas žingsniais po 100ms suderinamumui su kai kuriais QC įkrovikliais"
+        },
+        "BoostTemperature": {
+            "text2": [
+                "Turbo",
+                "temperat."
+            ],
+            "desc": "Temperatūra turbo režimu"
+        },
+        "AutoStart": {
+            "text2": [
+                "Automatinis",
+                "paleidimas"
+            ],
+            "desc": "Ar pradėti kaitininti iš karto įjungus lituoklį (N=Ne | T=Taip | M=Miegas | K=Miegoti kambario temperatūroje)"
+        },
+        "TempChangeShortStep": {
+            "text2": [
+                "Temp.keitim.",
+                "trump.spust."
+            ],
+            "desc": "Temperatūros keitimo žingsnis trumpai spustėlėjus mygtuką"
+        },
+        "TempChangeLongStep": {
+            "text2": [
+                "Temp.keitim.",
+                "ilgas pasp."
+            ],
+            "desc": "Temperatūros keitimo žingsnis ilgai paspaudus mygtuką"
+        },
+        "LockingMode": {
+            "text2": [
+                "Mygtukų",
+                "užraktas"
+            ],
+            "desc": "Lituodami, ilgai paspauskite abu mygtukus, kad juos užrakintumėte (I=Išjungta | T=leidžiamas tik Turbo režimas | V=Visiškas užrakinimas)"
+        },
+        "MotionSensitivity": {
+            "text2": [
+                "Judesio",
+                "jautrumas"
+            ],
+            "desc": "Judesio jautrumas (0=Išjungta | 1=Mažiausias | ... | 9=Didžiausias)"
+        },
+        "SleepTemperature": {
+            "text2": [
+                "Miego",
+                "temperat."
+            ],
+            "desc": "Antgalio temperatūra miego režimu"
+        },
+        "SleepTimeout": {
+            "text2": [
+                "Miego",
+                "laikas"
+            ],
+            "desc": "Užmigimo laikas (sekundės | minutės)"
+        },
+        "ShutdownTimeout": {
+            "text2": [
+                "Išjungimo",
+                "laikas"
+            ],
+            "desc": "Išjungimo laikas (minutės)"
+        },
+        "HallEffSensitivity": {
+            "text2": [
+                "Holo",
+                "jutiklis"
+            ],
+            "desc": "Holo jutiklio jautrumas nustatant miegą (0=Išjungta | 1=Mažiausias | ... | 9=Didžiausias)"
+        },
+        "TemperatureUnit": {
+            "text2": [
+                "Temperatūros",
+                "vienetai"
+            ],
+            "desc": "Temperatūros vienetai (C=Celsijus | F=Farenheitas)"
+        },
+        "DisplayRotation": {
+            "text2": [
+                "Ekrano",
+                "orientacija"
+            ],
+            "desc": "Ekrano orientacija (D=Dešiniarankiams | K=Kairiarankiams | A=Automatinė)"
+        },
+        "CooldownBlink": {
+            "text2": [
+                "Atvėsimo",
+                "mirksėjimas"
+            ],
+            "desc": "Ar mirksėti temperatūrą ekrane kol vėstantis antgalis vis dar karštas?"
+        },
+        "ScrollingSpeed": {
+            "text2": [
+                "Aprašymo",
+                "greitis"
+            ],
+            "desc": "Greitis, kuriuo šis tekstas slenka"
+        },
+        "ReverseButtonTempChange": {
+            "text2": [
+                "Sukeisti + -",
+                "mygtukus?"
+            ],
+            "desc": "Sukeisti + - temperatūros keitimo mygtukus vietomis"
+        },
+        "AnimSpeed": {
+            "text2": [
+                "Animacijų",
+                "greitis"
+            ],
+            "desc": "Paveiksliukų animacijų greitis meniu punktuose (I=Išjungtas | L=Lėtas | V=Vidutinis | G=Greitas)"
+        },
+        "AnimLoop": {
+            "text2": [
+                "Animacijų",
+                "pakartojimas"
+            ],
+            "desc": "Leidžia kartoti animacijas be sustojimo pagrindiniame meniu"
+        },
+        "Brightness": {
+            "text2": [
+                "Ekrano",
+                "šviesumas"
+            ],
+            "desc": "Nustato OLED ekrano kontrastą/šviesumą."
+        },
+        "ColourInversion": {
+            "text2": [
+                "Ekrano",
+                "invertavimas"
+            ],
+            "desc": "Invertuoja OLED ekrano spalvas"
+        },
+        "LOGOTime": {
+            "text2": [
+                "Boot logo",
+                "duration"
+            ],
+            "desc": "Set boot logo duration (s=seconds)"
+        },
+        "AdvancedIdle": {
+            "text2": [
+                "Detalus lau-",
+                "kimo ekranas"
+            ],
+            "desc": "Ar rodyti papildomą informaciją mažesniu šriftu laukimo ekrane"
+        },
+        "AdvancedSoldering": {
+            "text2": [
+                "Detalus lita-",
+                "vimo ekranas"
+            ],
+            "desc": "Ar rodyti išsamią informaciją lituojant"
+        },
+        "PowerLimit": {
+            "text2": [
+                "Galios",
+                "riba"
+            ],
+            "desc": "Didžiausia galia, kurią gali naudoti lituoklis (Vatai)"
+        },
+        "CalibrateCJC": {
+            "text2": [
+                "Calibrate CJC",
+                "at next boot"
+            ],
+            "desc": "At next boot tip Cold Junction Compensation will be calibrated (not required if Delta T is < 5°C)"
+        },
+        "VoltageCalibration": {
+            "text2": [
+                "Kalibruoti",
+                "įvesties įtampą?"
+            ],
+            "desc": "Įvesties įtampos kalibravimas. Trumpai paspauskite, norėdami nustatyti, ilgai paspauskite, kad išeitumėte."
+        },
+        "PowerPulsePower": {
+            "text2": [
+                "Galios",
+                "pulso W"
+            ],
+            "desc": "Periodinis galios pulso intensyvumas maitinblokiui, neleidžiantis jam užmigti."
+        },
+        "PowerPulseWait": {
+            "text2": [
+                "Galios pulso",
+                "dažnumas"
+            ],
+            "desc": "Pasikartojantis laiko intervalas (x 2.5s), ties kuriuo kartojamas galios pulsas maitinblokiui, neleidžiantis jam užmigti"
+        },
+        "PowerPulseDuration": {
+            "text2": [
+                "Galios pulso",
+                "trukmė"
+            ],
+            "desc": "Galios pulso aktyvioji trukmė (x 250ms)"
+        },
+        "SettingsReset": {
+            "text2": [
+                "Atstatyti",
+                "nustatymus?"
+            ],
+            "desc": "Nustato nustatymus į numatytuosius"
+        },
+        "LanguageSwitch": {
+            "text2": [
+                "Kalba:",
+                " LT    Lietuvių"
+            ],
+            "desc": ""
+        }
+    }
+}

Translations/translation_NB.json

@@ -0,0 +1,341 @@
+{
+    "languageCode": "NB",
+    "languageLocalName": "Norsk bokmål",
+    "tempUnitFahrenheit": false,
+    "messages": {
+        "SettingsCalibrationWarning": "Before rebooting, make sure tip & handle are at room temperature!",
+        "CJCCalibrating": "calibrating",
+        "SettingsResetWarning": "Er du sikker på at du vil tilbakestille til standardinnstillinger?",
+        "UVLOWarningString": "Lavspenn",
+        "UndervoltageString": "Underspenning",
+        "InputVoltageString": "Innspenn.: ",
+        "SleepingSimpleString": "Zzzz",
+        "SleepingAdvancedString": "Dvale...",
+        "SleepingTipAdvancedString": "Spiss:",
+        "OffString": "Av",
+        "DeviceFailedValidationWarning": "Enheten din er sannsynligvis en forfalskning!"
+    },
+    "messagesWarn": {
+        "CJCCalibrationDone": [
+            "Calibration",
+            "done!"
+        ],
+        "ResetOKMessage": "Tilbakestilling OK",
+        "SettingsResetMessage": [
+            "Noen innstillinger",
+            "ble endret!"
+        ],
+        "NoAccelerometerMessage": [
+            "Ingen akselerometer",
+            "funnet!"
+        ],
+        "NoPowerDeliveryMessage": [
+            "Ingen USB-PD IC",
+            "funnet!"
+        ],
+        "LockingKeysString": "LÅST",
+        "UnlockingKeysString": "ÅPNET",
+        "WarningKeysLockedString": "!LÅST!",
+        "WarningThermalRunaway": [
+            "Termisk",
+            "rømling"
+        ]
+    },
+    "characters": {
+        "SettingRightChar": "H",
+        "SettingLeftChar": "V",
+        "SettingAutoChar": "A",
+        "SettingOffChar": "O",
+        "SettingSlowChar": "S",
+        "SettingMediumChar": "M",
+        "SettingFastChar": "F",
+        "SettingStartNoneChar": "I",
+        "SettingStartSolderingChar": "L",
+        "SettingStartSleepChar": "D",
+        "SettingStartSleepOffChar": "R",
+        "SettingSensitivityOff": "O",
+        "SettingSensitivityLow": "L",
+        "SettingSensitivityMedium": "M",
+        "SettingSensitivityHigh": "H",
+        "SettingLockDisableChar": "D",
+        "SettingLockBoostChar": "B",
+        "SettingLockFullChar": "F"
+    },
+    "menuGroups": {
+        "PowerMenu": {
+            "text2": [
+                "Effekt-",
+                "innst."
+            ],
+            "desc": ""
+        },
+        "SolderingMenu": {
+            "text2": [
+                "Lodde-",
+                "innst."
+            ],
+            "desc": ""
+        },
+        "PowerSavingMenu": {
+            "text2": [
+                "Dvale-",
+                "innst."
+            ],
+            "desc": ""
+        },
+        "UIMenu": {
+            "text2": [
+                "Bruker-",
+                "grensesn."
+            ],
+            "desc": ""
+        },
+        "AdvancedMenu": {
+            "text2": [
+                "Avanserte",
+                "valg"
+            ],
+            "desc": ""
+        }
+    },
+    "menuOptions": {
+        "DCInCutoff": {
+            "text2": [
+                "Kilde",
+                ""
+            ],
+            "desc": "Strømforsyning. Sett nedre spenning for automatisk nedstenging. (DC 10V) (S 3.3V per celle)"
+        },
+        "MinVolCell": {
+            "text2": [
+                "Minimum",
+                "spenning"
+            ],
+            "desc": "Minimum tillatt spenning per celle (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)"
+        },
+        "QCMaxVoltage": {
+            "text2": [
+                "QC-",
+                "spenning"
+            ],
+            "desc": "Maks QC-spenning bolten skal forhandle om"
+        },
+        "PDNegTimeout": {
+            "text2": [
+                "PD-",
+                "tidsavb."
+            ],
+            "desc": "PD-forhandlingstidsavbrudd i steg på 100 ms for kompatibilitet med noen QC-ladere"
+        },
+        "BoostTemperature": {
+            "text2": [
+                "KTmp",
+                ""
+            ],
+            "desc": "Temperatur i \"kraft-modus\""
+        },
+        "AutoStart": {
+            "text2": [
+                "AStart",
+                ""
+            ],
+            "desc": "Start automatisk med lodding når strøm kobles til. (I=Inaktiv | L=Lodding | D=Dvale | R=Dvale romtemperatur)"
+        },
+        "TempChangeShortStep": {
+            "text2": [
+                "Temp-endring",
+                "kort"
+            ],
+            "desc": "Hvor mye temperaturen skal endres ved kort trykk på knapp"
+        },
+        "TempChangeLongStep": {
+            "text2": [
+                "Temp-endring",
+                "lang"
+            ],
+            "desc": "Hvor mye temperaturen skal endres ved langt trykk på knapp"
+        },
+        "LockingMode": {
+            "text2": [
+                "Tillat å låse",
+                "knapper"
+            ],
+            "desc": "Mens du lodder, hold nede begge knapper for å bytte mellom låsemodus (D=deaktiver | B=kun boost | F=full lås)"
+        },
+        "MotionSensitivity": {
+            "text2": [
+                "BSensr",
+                ""
+            ],
+            "desc": "Bevegelsesfølsomhet (0=Inaktiv | 1=Minst følsom | ... | 9=Mest følsom)"
+        },
+        "SleepTemperature": {
+            "text2": [
+                "DTmp",
+                ""
+            ],
+            "desc": "Dvaletemperatur (C)"
+        },
+        "SleepTimeout": {
+            "text2": [
+                "DTid",
+                ""
+            ],
+            "desc": "Tid før dvale (Minutter | Sekunder)"
+        },
+        "ShutdownTimeout": {
+            "text2": [
+                "AvTid",
+                ""
+            ],
+            "desc": "Tid før automatisk nedstenging (Minutter)"
+        },
+        "HallEffSensitivity": {
+            "text2": [
+                "Hall-sensor",
+                "følsomhet"
+            ],
+            "desc": "Sensitiviteten til Hall-effekt-sensoren for å detektere inaktivitet (0=Inaktiv | 1=Minst følsom | ... | 9=Mest følsom)"
+        },
+        "TemperatureUnit": {
+            "text2": [
+                "TmpEnh",
+                ""
+            ],
+            "desc": "Temperaturskala (C=Celsius | F=Fahrenheit)"
+        },
+        "DisplayRotation": {
+            "text2": [
+                "SkRetn",
+                ""
+            ],
+            "desc": "Skjermretning (H=Høyrehendt | V=Venstrehendt | A=Automatisk)"
+        },
+        "CooldownBlink": {
+            "text2": [
+                "KjBlnk",
+                ""
+            ],
+            "desc": "Blink temperaturen på skjermen mens spissen fortsatt er varm."
+        },
+        "ScrollingSpeed": {
+            "text2": [
+                "RullHa",
+                ""
+            ],
+            "desc": "Hastigheten på rulletekst"
+        },
+        "ReverseButtonTempChange": {
+            "text2": [
+                "Bytt",
+                "+ - kn."
+            ],
+            "desc": "Bytt om på knappene for å stille temperatur"
+        },
+        "AnimSpeed": {
+            "text2": [
+                "Anim.",
+                "hastighet"
+            ],
+            "desc": "Hastigheten til animasjonene i menyen (O=off | S=slow | M=medium | F=fast)"
+        },
+        "AnimLoop": {
+            "text2": [
+                "Anim.",
+                "loop"
+            ],
+            "desc": "Loop ikon-animasjoner i hovedmenyen"
+        },
+        "Brightness": {
+            "text2": [
+                "Skjerm-",
+                "lysstyrke"
+            ],
+            "desc": "Juster lysstyrken til OLED-skjermen"
+        },
+        "ColourInversion": {
+            "text2": [
+                "Inverter",
+                "skjerm"
+            ],
+            "desc": "Inverter fargene på OLED-skjermen"
+        },
+        "LOGOTime": {
+            "text2": [
+                "Oppstartlogo",
+                "varighet"
+            ],
+            "desc": "Setter varigheten til oppstartlogoen (s=sekunder)"
+        },
+        "AdvancedIdle": {
+            "text2": [
+                "AvDvSk",
+                ""
+            ],
+            "desc": "Vis detaljert informasjon med liten skrift på dvaleskjermen."
+        },
+        "AdvancedSoldering": {
+            "text2": [
+                "AvLdSk",
+                ""
+            ],
+            "desc": "Vis detaljert informasjon ved lodding"
+        },
+        "PowerLimit": {
+            "text2": [
+                "Effekt-",
+                "grense"
+            ],
+            "desc": "Maks effekt jernet kan bruke (W=watt)"
+        },
+        "CalibrateCJC": {
+            "text2": [
+                "TempKal?",
+                ""
+            ],
+            "desc": "At next boot tip Cold Junction Compensation will be calibrated (not required if Delta T is < 5°C)"
+        },
+        "VoltageCalibration": {
+            "text2": [
+                "KalSpIn?",
+                ""
+            ],
+            "desc": "Kalibrer spenning. Knappene justerer. Langt trykk for å gå ut"
+        },
+        "PowerPulsePower": {
+            "text2": [
+                "Effekt-",
+                "puls"
+            ],
+            "desc": "Hvor høy effekt pulsen for å holde laderen våken skal ha (watt)"
+        },
+        "PowerPulseWait": {
+            "text2": [
+                "Effektpuls",
+                "forsink."
+            ],
+            "desc": "Forsinkelse før effektpulsen utløses (x 2.5s)"
+        },
+        "PowerPulseDuration": {
+            "text2": [
+                "Effektpuls",
+                "varighet"
+            ],
+            "desc": "Hvor lenge holde-våken-pulsen varer (x 250ms)"
+        },
+        "SettingsReset": {
+            "text2": [
+                "TilbStl?",
+                ""
+            ],
+            "desc": "Tilbakestill alle innstillinger"
+        },
+        "LanguageSwitch": {
+            "text2": [
+                "Språk:",
+                " NB    Norsk bm"
+            ],
+            "desc": ""
+        }
+    }
+}

Translations/translation_NL.json

@@ -1,207 +1,341 @@
 {
-  "languageCode": "NL",
-  "languageLocalName": "Nederlands",
-  "fonts": ["ascii_basic", "latin_extended"],
-  "tempUnitFahrenheit": false,
-  "messages": {
-    "SettingsCalibrationWarning": "Zorg ervoor dat te punt op kamertemperatuur is voor je verder gaat!",
-    "SettingsResetWarning": "Weet je zeker dat je de fabrieksinstellingen terug wil zetten?",
-    "UVLOWarningString": "DC Laag",
-    "UndervoltageString": "Onderspanning",
-    "InputVoltageString": "Input V: ",
-    "SleepingSimpleString": "Zzzz",
-    "SleepingAdvancedString": "Slaapstand...",
-    "SleepingTipAdvancedString": "Punt:",
-    "OffString": "Uit"
-  },
-  "messagesWarn": {
-    "ResetOKMessage": "Reset OK",
-    "SettingsResetMessage": ["Instellingen", "zijn gereset!"],
-    "NoAccelerometerMessage": ["No accelerometer", "detected!"],
-    "NoPowerDeliveryMessage": ["No USB-PD IC", "detected!"],
-    "LockingKeysString": " GEBLOKKEERD",
-    "UnlockingKeysString": "GEDEBLOKKEERD",
-    "WarningKeysLockedString": "!GEBLOKKEERD!",
-    "WarningThermalRunaway": ["Thermal", "Runaway"]
-  },
-  "characters": {
-    "SettingRightChar": "R",
-    "SettingLeftChar": "L",
-    "SettingAutoChar": "A",
-    "SettingOffChar": "O",
-    "SettingSlowChar": "S",
-    "SettingMediumChar": "M",
-    "SettingFastChar": "F",
-    "SettingStartNoneChar": "F",
-    "SettingStartSolderingChar": "T",
-    "SettingStartSleepChar": "S",
-    "SettingStartSleepOffChar": "K",
-    "SettingSensitivityOff": "O",
-    "SettingSensitivityLow": "L",
-    "SettingSensitivityMedium": "M",
-    "SettingSensitivityHigh": "H",
-    "SettingLockDisableChar": "U",
-    "SettingLockBoostChar": "B",
-    "SettingLockFullChar": "V"
-  },
-  "menuGroups": {
-    "PowerMenu": {
-      "text2": ["Power", "settings"],
-      "desc": "Power settings"
+    "languageCode": "NL",
+    "languageLocalName": "Nederlands",
+    "tempUnitFahrenheit": false,
+    "messages": {
+        "SettingsCalibrationWarning": "Before rebooting, make sure tip & handle are at room temperature!",
+        "CJCCalibrating": "calibrating",
+        "SettingsResetWarning": "Weet je zeker dat je de fabrieksinstellingen terug wilt zetten?",
+        "UVLOWarningString": "DC Laag",
+        "UndervoltageString": "Onderspanning",
+        "InputVoltageString": "Voeding V: ",
+        "SleepingSimpleString": "Zzzz",
+        "SleepingAdvancedString": "Slaapstand...",
+        "SleepingTipAdvancedString": "Punt:",
+        "OffString": "Uit",
+        "DeviceFailedValidationWarning": "Jouw toestel is wellicht een namaak-versie!"
     },
-    "SolderingMenu": {
-      "text2": ["Soldeer", "Instellingen"],
-      "desc": "Soldeer instellingen"
+    "messagesWarn": {
+        "CJCCalibrationDone": [
+            "Calibration",
+            "done!"
+        ],
+        "ResetOKMessage": "Reset OK",
+        "SettingsResetMessage": [
+            "Instellingen",
+            "zijn gereset!"
+        ],
+        "NoAccelerometerMessage": [
+            "Geen accelerometer",
+            "gedetecteerd!"
+        ],
+        "NoPowerDeliveryMessage": [
+            "Geen USB-PD IC ",
+            "gedetecteerd!"
+        ],
+        "LockingKeysString": "GEBLOKKEERD",
+        "UnlockingKeysString": "GEDEBLOKKEERD",
+        "WarningKeysLockedString": "!GEBLOKKEERD!",
+        "WarningThermalRunaway": [
+            "Verwarming",
+            "Oncontroleerbaar"
+        ]
     },
-    "PowerSavingMenu": {
-      "text2": ["Slaap", "Modes"],
-      "desc": "Stroom besparings instellingen"
+    "characters": {
+        "SettingRightChar": "R",
+        "SettingLeftChar": "L",
+        "SettingAutoChar": "A",
+        "SettingOffChar": "U",
+        "SettingSlowChar": "L",
+        "SettingMediumChar": "G",
+        "SettingFastChar": "S",
+        "SettingStartNoneChar": "U",
+        "SettingStartSolderingChar": "G",
+        "SettingStartSleepChar": "S",
+        "SettingStartSleepOffChar": "B",
+        "SettingSensitivityOff": "U",
+        "SettingSensitivityLow": "L",
+        "SettingSensitivityMedium": "G",
+        "SettingSensitivityHigh": "H",
+        "SettingLockDisableChar": "U",
+        "SettingLockBoostChar": "B",
+        "SettingLockFullChar": "V"
     },
-    "UIMenu": {
-      "text2": ["Gebruikers-", "interface"],
-      "desc": "Gebruikers-interface instellingen"
+    "menuGroups": {
+        "PowerMenu": {
+            "text2": [
+                "Voeding",
+                "instellingen"
+            ],
+            "desc": ""
+        },
+        "SolderingMenu": {
+            "text2": [
+                "Soldeer",
+                "instellingen"
+            ],
+            "desc": ""
+        },
+        "PowerSavingMenu": {
+            "text2": [
+                "Slaap",
+                "Modes"
+            ],
+            "desc": ""
+        },
+        "UIMenu": {
+            "text2": [
+                "Weergave",
+                "instellingen"
+            ],
+            "desc": ""
+        },
+        "AdvancedMenu": {
+            "text2": [
+                "Geavanceerde",
+                "instellingen"
+            ],
+            "desc": ""
+        }
     },
-    "AdvancedMenu": {
-      "text2": ["Geavanceerde", "Instellingen"],
-      "desc": "Geavanceerde Instellingen"
+    "menuOptions": {
+        "DCInCutoff": {
+            "text2": [
+                "Spannings-",
+                "bron"
+            ],
+            "desc": "Spanningsbron. Stelt drempelspanning in. (DC 10V) (S 3.3V per cel)"
+        },
+        "MinVolCell": {
+            "text2": [
+                "Minimum",
+                "voltage"
+            ],
+            "desc": "Minimum toegestaan voltage per cell (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)"
+        },
+        "QCMaxVoltage": {
+            "text2": [
+                "QC",
+                "Voltage"
+            ],
+            "desc": "Maximaal QC voltage dat gevraagd mag worden"
+        },
+        "PDNegTimeout": {
+            "text2": [
+                "PD",
+                "timeout"
+            ],
+            "desc": "PD afstemmingsduur in stappen van 100ms (voor compatibiliteit met sommige QC laders)"
+        },
+        "BoostTemperature": {
+            "text2": [
+                "Boost",
+                "temp"
+            ],
+            "desc": "Punt temperatuur in boostmode"
+        },
+        "AutoStart": {
+            "text2": [
+                "Opstart",
+                "gedrag"
+            ],
+            "desc": "Gedrag bij opstarten (U=Uit | G=Gebruiks-temperatuur | S=Slaapstand-temperatuur tot beweging | B=Uit tot beweging)"
+        },
+        "TempChangeShortStep": {
+            "text2": [
+                "Temp veranderen",
+                "kort"
+            ],
+            "desc": "Temperatuur verandering bij kort drukken"
+        },
+        "TempChangeLongStep": {
+            "text2": [
+                "Temp veranderen",
+                "lang"
+            ],
+            "desc": "Temperatuur verandering bij lang drukken"
+        },
+        "LockingMode": {
+            "text2": [
+                "Knopblokkering",
+                "inschakelen"
+            ],
+            "desc": "Tijdens solderen lang op beide knoppen drukken blokkeert de knoppen (U=Uit | B=Alleen boost mode | V=Volledig blokkeren)"
+        },
+        "MotionSensitivity": {
+            "text2": [
+                "Bewegings-",
+                "gevoeligheid"
+            ],
+            "desc": "Bewegingsgevoeligheid (0=uit | 1=minst gevoelig | ... | 9=meest gevoelig)"
+        },
+        "SleepTemperature": {
+            "text2": [
+                "Slaap",
+                "temp"
+            ],
+            "desc": "Punt temperatuur in slaapstand"
+        },
+        "SleepTimeout": {
+            "text2": [
+                "Slaap",
+                "time-out"
+            ],
+            "desc": "Tijd voordat slaapmodus wordt geactiveerd (S=seconden | M=minuten)"
+        },
+        "ShutdownTimeout": {
+            "text2": [
+                "Uitschakel",
+                "time-out"
+            ],
+            "desc": "Tijd voordat soldeerbout automatisch uitschakelt (M=minuten)"
+        },
+        "HallEffSensitivity": {
+            "text2": [
+                "Hall sensor",
+                "gevoeligheid"
+            ],
+            "desc": "Gevoeligheid van de Hall effect sensor om naar slaapmodus te gaan (0=uit | 1=minst gevoelig | ... | 9=meest gevoelig)"
+        },
+        "TemperatureUnit": {
+            "text2": [
+                "Temperatuur",
+                "eenheid"
+            ],
+            "desc": "Temperatuureenheid (C=Celsius | F=Fahrenheit)"
+        },
+        "DisplayRotation": {
+            "text2": [
+                "Scherm-",
+                "oriëntatie"
+            ],
+            "desc": "Schermoriëntatie (R=Rechtshandig | L=Linkshandig | A=Automatisch)"
+        },
+        "CooldownBlink": {
+            "text2": [
+                "Afkoel",
+                "flitsen"
+            ],
+            "desc": "Temperatuur laten flitsen in het hoofdmenu zo lang de punt nog warm is"
+        },
+        "ScrollingSpeed": {
+            "text2": [
+                "Scroll",
+                "snelheid"
+            ],
+            "desc": "Snelheid waarmee de tekst scrolt (S=Snel | L=Langzaam)"
+        },
+        "ReverseButtonTempChange": {
+            "text2": [
+                "Draai",
+                "+ - knoppen om"
+            ],
+            "desc": "Keer de +- knoppen van de temperatuurregeling om"
+        },
+        "AnimSpeed": {
+            "text2": [
+                "Animatie",
+                "snelheid"
+            ],
+            "desc": "Tempo van de icoon animaties in het hoofdmenu (U=uit | L=langzaam | G=gemiddeld | S=snel)"
+        },
+        "AnimLoop": {
+            "text2": [
+                "Animatie",
+                "herhaling"
+            ],
+            "desc": "Herhaal icoon animaties in hoofdmenu"
+        },
+        "Brightness": {
+            "text2": [
+                "Scherm",
+                "helderheid"
+            ],
+            "desc": "Pas helderheid van het OLED scherm aan"
+        },
+        "ColourInversion": {
+            "text2": [
+                "Inverteer",
+                "scherm"
+            ],
+            "desc": "Inverteer de kleuren van het OLED scherm"
+        },
+        "LOGOTime": {
+            "text2": [
+                "Opstart logo",
+                "duur"
+            ],
+            "desc": "Stelt de weergaveduur van het opstartlogo in (s=seconden)"
+        },
+        "AdvancedIdle": {
+            "text2": [
+                "Gedetailleerd",
+                "startscherm"
+            ],
+            "desc": "Gedetailleerde informatie weergeven in een kleine letters op het startscherm."
+        },
+        "AdvancedSoldering": {
+            "text2": [
+                "Gedetailleerd",
+                "soldeerscherm"
+            ],
+            "desc": "Gedetailleerde informatie weergeven in een kleiner lettertype op het soldeerscherm"
+        },
+        "PowerLimit": {
+            "text2": [
+                "Vermogen",
+                "limiet"
+            ],
+            "desc": "Maximaal vermogen (W=Watt)"
+        },
+        "CalibrateCJC": {
+            "text2": [
+                "Calibrate CJC",
+                "at next boot"
+            ],
+            "desc": "At next boot tip Cold Junction Compensation will be calibrated (not required if Delta T is < 5°C)"
+        },
+        "VoltageCalibration": {
+            "text2": [
+                "Kalibreer",
+                "input-voltage?"
+            ],
+            "desc": "Start VIN Kalibratie (druk lang om te sluiten)"
+        },
+        "PowerPulsePower": {
+            "text2": [
+                "Stroom",
+                "Puls"
+            ],
+            "desc": "Intensiteit van stroompuls om voeding aan te houden (watt)"
+        },
+        "PowerPulseWait": {
+            "text2": [
+                "Stroompuls",
+                "interval"
+            ],
+            "desc": "Tijdsduur tussen voeding wakker-blijf-pulsen (x 2.5s)"
+        },
+        "PowerPulseDuration": {
+            "text2": [
+                "Power pulse",
+                "duur"
+            ],
+            "desc": "Duur van voeding-wakker-blijf-pulsen (x 250ms)"
+        },
+        "SettingsReset": {
+            "text2": [
+                "Instellingen",
+                "resetten?"
+            ],
+            "desc": "Alle instellingen terugzetten naar fabrieksinstellingen"
+        },
+        "LanguageSwitch": {
+            "text2": [
+                "Taal:",
+                " NL  Nederlands"
+            ],
+            "desc": ""
+        }
     }
-  },
-  "menuOptions": {
-    "DCInCutoff": {
-      "text2": ["Spannings-", "bron"],
-      "desc": "Spanningsbron. Stelt drempelspanning in. (DC 10V) (S 3.3V per cel)"
-    },
-    "SleepTemperature": {
-      "text2": ["Slaap", "temp"],
-      "desc": "Temperatuur in slaapstand"
-    },
-    "SleepTimeout": {
-      "text2": ["Slaap", "time-out"],
-      "desc": "Slaap time-out (Minuten | Seconden)"
-    },
-    "ShutdownTimeout": {
-      "text2": ["Uitschakel", "time-out"],
-      "desc": "Automatisch afsluiten time-out (Minuten)"
-    },
-    "MotionSensitivity": {
-      "text2": ["Bewegings-", "gevoeligheid"],
-      "desc": "Bewegingsgevoeligheid (0=uit | 1=minst gevoelig | ... | 9=meest gevoelig)"
-    },
-    "TemperatureUnit": {
-      "text2": ["Temperatuur", "eenheid"],
-      "desc": "Temperatuureenheid (C=Celsius | F=Fahrenheit)"
-    },
-    "AdvancedIdle": {
-      "text2": ["Gedetailleerd", "startscherm"],
-      "desc": "Gedetailleerde informatie weergeven in een kleiner lettertype op het startscherm."
-    },
-    "DisplayRotation": {
-      "text2": ["Scherm-", "oriëntatie"],
-      "desc": "Schermoriëntatie (R=Rechtshandig | L=Linkshandig | A=Automatisch)"
-    },
-    "BoostTemperature": {
-      "text2": ["Boost", "temp"],
-      "desc": "Temperatuur in boostmode"
-    },
-    "AutoStart": {
-      "text2": ["Auto", "start"],
-      "desc": "Breng de soldeerbout direct op temperatuur bij het opstarten. (F=Uit | T=Soldeertemperatuur | S=Slaapstand-temperatuur | K=Slaapstand kamertemperatuur)"
-    },
-    "CooldownBlink": {
-      "text2": ["Afkoel", "flikker"],
-      "desc": "Temperatuur laten flikkeren in het hoofdmenu als de soldeerpunt aan het afkoelen is."
-    },
-    "TemperatureCalibration": {
-      "text2": ["Calibreer", "temperatuur?"],
-      "desc": "Temperatuursafwijking van de soldeerpunt calibreren."
-    },
-    "SettingsReset": {
-      "text2": ["Instellingen", "resetten?"],
-      "desc": "Alle instellingen terugzetten."
-    },
-    "VoltageCalibration": {
-      "text2": ["Calibreer", "input-voltage?"],
-      "desc": "VIN Calibreren. (druk lang om te sluiten)."
-    },
-    "AdvancedSoldering": {
-      "text2": ["Gedetailleerd", "soldeerscherm"],
-      "desc": "Gedetailleerde informatie weergeven in een kleiner lettertype op het soldeerscherm."
-    },
-    "ScrollingSpeed": {
-      "text2": ["Scroll", "snelheid"],
-      "desc": "Snelheid waarmee de tekst scrolt."
-    },
-    "QCMaxVoltage": {
-      "text2": ["Power", "Wattage"],
-      "desc": "Wattage van de gebruikte voeding"
-    },
-    "PDNegTimeout": {
-      "text2": ["PD", "timeout"],
-      "desc": "PD negotiation timeout in 100ms steps for compatibility with some QC chargers (0: disabled)"
-    },
-    "PowerLimit": {
-      "text2": ["Vermogen", "limiet"],
-      "desc": "Maximaal vermogen (Watts)"
-    },
-    "ReverseButtonTempChange": {
-      "text2": ["Draai", "+ - knoppen om"],
-      "desc": "Keer de +- knoppen om de termperatuur van de punt te regelen om."
-    },
-    "TempChangeShortStep": {
-      "text2": ["Temp veranderen", "kort"],
-      "desc": "Temperatuur verandering bij kort drukken"
-    },
-    "TempChangeLongStep": {
-      "text2": ["Temp veranderen", "lang"],
-      "desc": "Temperatuur verandering bij lang drukken"
-    },
-    "PowerPulsePower": {
-      "text2": ["Vermogen", "Puls W"],
-      "desc": "Vermogen van puls om soldeerbout aan te houden"
-    },
-    "HallEffSensitivity": {
-      "text2": ["Hall sensor", "sensitivity"],
-      "desc": "Sensitivity of the Hall effect sensor to detect sleep (0=uit | 1=minst gevoelig | ... | 9=meest gevoelig)"
-    },
-    "LockingMode": {
-      "text2": ["Blokkeer", "knoppen"],
-      "desc": "Tijdens solderen lang op beide knoppen drukken, blokkeert ze. (U=Uit | B=Alleen boost | V=Volledig blokkeren)"
-    },
-    "MinVolCell": {
-      "text2": ["Minimum", "voltage"],
-      "desc": "Minimum allowed voltage per cell (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)"
-    },
-    "AnimLoop": {
-      "text2": ["Anim.", "loop"],
-      "desc": "Loop icon animations in main menu"
-    },
-    "AnimSpeed": {
-      "text2": ["Anim.", "speed"],
-      "desc": "Pace of icon animations in menu (O=off | S=slow | M=medium | F=fast)"
-    },
-    "PowerPulseWait": {
-      "text2": ["Power pulse", "delay"],
-      "desc": "Delay before keep-awake-pulse is triggered (x 2.5s)"
-    },
-    "PowerPulseDuration": {
-      "text2": ["Power pulse", "duration"],
-      "desc": "Keep-awake-pulse duration (x 250ms)"
-    },
-    "LanguageSwitch": {
-      "text2": ["Spraak :", " NL  Nederlands"],
-      "desc": ""
-    },
-    "Brightness": {
-      "text2": ["Screen", "brightness"],
-      "desc": "Adjust the brightness of the OLED screen"
-    },
-    "ColourInversion": {
-      "text2": ["Invert", "screen"],
-      "desc": "Invert the colours of the OLED screen"
-    },
-    "LOGOTime": {
-      "text2": ["Boot logo", "duration"],
-      "desc": "Sets the duration for the boot logo (s=seconds)"
-    }
-  }
-}
+}

Translations/translation_NL_BE.json

@@ -1,207 +1,341 @@
-{
-  "languageCode": "NL_BE",
-  "languageLocalName": "Vlaams",
-  "fonts": ["ascii_basic", "latin_extended"],
-  "tempUnitFahrenheit": false,
-  "messages": {
-    "SettingsCalibrationWarning": "Zorg vooraf dat de punt op kamertemperatuur is!",
-    "SettingsResetWarning": "Ben je zeker dat je alle standaardwaarden wil resetten?",
-    "UVLOWarningString": "Voedingsspanning LAAG",
-    "UndervoltageString": "Onderspanning",
-    "InputVoltageString": "Voedingsspanning: ",
-    "SleepingSimpleString": "Zzz ",
-    "SleepingAdvancedString": "Slaapstand...",
-    "SleepingTipAdvancedString": "Punt:",
-    "OffString": "Uit"
-  },
-  "messagesWarn": {
-    "ResetOKMessage": "Reset OK",
-    "SettingsResetMessage": ["Settings were", "reset!"],
-    "NoAccelerometerMessage": ["No accelerometer", "detected!"],
-    "NoPowerDeliveryMessage": ["No USB-PD IC", "detected!"],
-    "LockingKeysString": "LOCKED",
-    "UnlockingKeysString": "UNLOCKED",
-    "WarningKeysLockedString": "!LOCKED!",
-    "WarningThermalRunaway": ["Thermal", "Runaway"]
-  },
-  "characters": {
-    "SettingRightChar": "R",
-    "SettingLeftChar": "L",
-    "SettingAutoChar": "A",
-    "SettingOffChar": "O",
-    "SettingSlowChar": "T",
-    "SettingMediumChar": "M",
-    "SettingFastChar": "S",
-    "SettingStartNoneChar": "F",
-    "SettingStartSolderingChar": "T",
-    "SettingStartSleepChar": "S",
-    "SettingStartSleepOffChar": "K",
-    "SettingSensitivityOff": "O",
-    "SettingSensitivityLow": "L",
-    "SettingSensitivityMedium": "M",
-    "SettingSensitivityHigh": "H",
-    "SettingLockDisableChar": "D",
-    "SettingLockBoostChar": "B",
-    "SettingLockFullChar": "F"
-  },
-  "menuGroups": {
-    "PowerMenu": {
-      "text2": ["Power", "settings"],
-      "desc": "Power settings"
-    },
-    "SolderingMenu": {
-      "text2": ["Soldeer", "Instellingen"],
-      "desc": "Soldeerinstellingen"
-    },
-    "PowerSavingMenu": {
-      "text2": ["Slaap", "standen"],
-      "desc": "Batterijspaarstanden"
-    },
-    "UIMenu": {
-      "text2": ["Gebruikers-", "Interface"],
-      "desc": "Gebruikersinterface Instellingen"
-    },
-    "AdvancedMenu": {
-      "text2": ["Gevorderde", "Instellingen"],
-      "desc": "Gevorderde Instellingen"
-    }
-  },
-  "menuOptions": {
-    "DCInCutoff": {
-      "text2": ["Spannings-", "bron"],
-      "desc": "Spanningsbron. Stelt minimumspanning in. (DC 10V) (S 3.3V per cel)"
-    },
-    "SleepTemperature": {
-      "text2": ["Slaap", "temp"],
-      "desc": "Temperatuur in slaapstand (°C)"
-    },
-    "SleepTimeout": {
-      "text2": ["Slaap", "time-out"],
-      "desc": "Slaapstand time-out (Minuten | Seconden)"
-    },
-    "ShutdownTimeout": {
-      "text2": ["Uitschakel", "time-out"],
-      "desc": "Automatisch afsluiten time-out (Minuten)"
-    },
-    "MotionSensitivity": {
-      "text2": ["Bewegings-", "gevoeligheid"],
-      "desc": "Bewegingsgevoeligheid (0=uit | 1=minst gevoelig | ... | 9=meest gevoelig)"
-    },
-    "TemperatureUnit": {
-      "text2": ["Temperatuur", "schaal"],
-      "desc": "Temperatuurschaal (°C=Celsius | °F=Fahrenheit)"
-    },
-    "AdvancedIdle": {
-      "text2": ["Gedetailleerd", "slaapscherm"],
-      "desc": "Gedetailleerde informatie in een kleiner lettertype in het slaapscherm."
-    },
-    "DisplayRotation": {
-      "text2": ["Scherm-", "oriëntatie"],
-      "desc": "Schermoriëntatie (R=Rechtshandig | L=Linkshandig | A=Automatisch)"
-    },
-    "BoostTemperature": {
-      "text2": ["Verhogings", "temp"],
-      "desc": "Verhogingstemperatuur"
-    },
-    "AutoStart": {
-      "text2": ["Auto", "start"],
-      "desc": "Breng de soldeerbout op temperatuur bij het opstarten. (F=Uit | T=Soldeertemperatuur | S=Slaapstand-temperatuur | K=Slaapstand kamertemperatuur)"
-    },
-    "CooldownBlink": {
-      "text2": ["Afkoel", "knipper"],
-      "desc": "Temperatuur knippert in hoofdmenu tijdens afkoeling."
-    },
-    "TemperatureCalibration": {
-      "text2": ["Calibreer", "temperatuur?"],
-      "desc": "Temperatuur van de punt calibreren."
-    },
-    "SettingsReset": {
-      "text2": ["Instellingen", "resetten?"],
-      "desc": "Alle instellingen resetten."
-    },
-    "VoltageCalibration": {
-      "text2": ["Calibreer", "voedingsspanning?"],
-      "desc": "VIN Calibreren. Bevestigen door knoppen lang in te drukken."
-    },
-    "AdvancedSoldering": {
-      "text2": ["Gedetailleerd", "soldeerscherm"],
-      "desc": "Gedetailleerde informatie in kleiner lettertype in soldeerscherm."
-    },
-    "ScrollingSpeed": {
-      "text2": ["Scrol", "snelheid"],
-      "desc": "Scrolsnelheid van de tekst."
-    },
-    "QCMaxVoltage": {
-      "text2": ["Vermogen", "Watt"],
-      "desc": "Vermogen van de adapter"
-    },
-    "PDNegTimeout": {
-      "text2": ["PD", "timeout"],
-      "desc": "PD negotiation timeout in 100ms steps for compatibility with some QC chargers"
-    },
-    "PowerLimit": {
-      "text2": ["Power", "limit"],
-      "desc": "Maximum power the iron can use (W=watt)"
-    },
-    "ReverseButtonTempChange": {
-      "text2": ["Swap", "+ - keys"],
-      "desc": "Reverse assignment of buttons for temperature adjustment"
-    },
-    "TempChangeShortStep": {
-      "text2": ["Temp change", "short"],
-      "desc": "Temperature-change-increment on short button press"
-    },
-    "TempChangeLongStep": {
-      "text2": ["Temp change", "long"],
-      "desc": "Temperature-change-increment on long button press"
-    },
-    "PowerPulsePower": {
-      "text2": ["Power", "pulse"],
-      "desc": "Intensity of power of keep-awake-pulse (watt)"
-    },
-    "HallEffSensitivity": {
-      "text2": ["Hall sensor", "sensitivity"],
-      "desc": "Sensitivity of the Hall effect sensor to detect sleep (0=uit | 1=minst gevoelig | ... | 9=meest gevoelig)"
-    },
-    "LockingMode": {
-      "text2": ["Allow locking", "buttons"],
-      "desc": "While soldering, hold down both buttons to toggle locking them (D=disable | B=boost mode only | F=full locking)"
-    },
-    "MinVolCell": {
-      "text2": ["Minimum", "voltage"],
-      "desc": "Minimum allowed voltage per cell (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)"
-    },
-    "AnimLoop": {
-      "text2": ["Anim.", "loop"],
-      "desc": "Loop icon animations in main menu"
-    },
-    "AnimSpeed": {
-      "text2": ["Anim.", "speed"],
-      "desc": "Pace of icon animations in menu (O=off | T=slow | M=medium | S=fast)"
-    },
-    "PowerPulseWait": {
-      "text2": ["Power pulse", "delay"],
-      "desc": "Delay before keep-awake-pulse is triggered (x 2.5s)"
-    },
-    "PowerPulseDuration": {
-      "text2": ["Power pulse", "duration"],
-      "desc": "Keep-awake-pulse duration (x 250ms)"
-    },
-    "LanguageSwitch": {
-      "text2": ["Spraak:", " NL_BE   Vlaams"],
-      "desc": ""
-    },
-    "Brightness": {
-      "text2": ["Screen", "brightness"],
-      "desc": "Adjust the brightness of the OLED screen"
-    },
-    "ColourInversion": {
-      "text2": ["Invert", "screen"],
-      "desc": "Invert the colours of the OLED screen"
-    },
-    "LOGOTime": {
-      "text2": ["Boot logo", "duration"],
-      "desc": "Sets the duration for the boot logo (s=seconds)"
-    }
-  }
-}
+{
+    "languageCode": "NL_BE",
+    "languageLocalName": "Vlaams",
+    "tempUnitFahrenheit": false,
+    "messages": {
+        "SettingsCalibrationWarning": "Before rebooting, make sure tip & handle are at room temperature!",
+        "CJCCalibrating": "calibrating",
+        "SettingsResetWarning": "Ben je zeker dat je alle standaardwaarden wil resetten?",
+        "UVLOWarningString": "Voedingsspanning LAAG",
+        "UndervoltageString": "Onderspanning",
+        "InputVoltageString": "Voedingsspanning: ",
+        "SleepingSimpleString": "Zzz ",
+        "SleepingAdvancedString": "Slaapstand...",
+        "SleepingTipAdvancedString": "Punt:",
+        "OffString": "Uit",
+        "DeviceFailedValidationWarning": "Your device is most likely a counterfeit!"
+    },
+    "messagesWarn": {
+        "CJCCalibrationDone": [
+            "Calibration",
+            "done!"
+        ],
+        "ResetOKMessage": "Reset OK",
+        "SettingsResetMessage": [
+            "Certain settings",
+            "were changed!"
+        ],
+        "NoAccelerometerMessage": [
+            "No accelerometer",
+            "detected!"
+        ],
+        "NoPowerDeliveryMessage": [
+            "No USB-PD IC",
+            "detected!"
+        ],
+        "LockingKeysString": "LOCKED",
+        "UnlockingKeysString": "UNLOCKED",
+        "WarningKeysLockedString": "!LOCKED!",
+        "WarningThermalRunaway": [
+            "Thermal",
+            "Runaway"
+        ]
+    },
+    "characters": {
+        "SettingRightChar": "R",
+        "SettingLeftChar": "L",
+        "SettingAutoChar": "A",
+        "SettingOffChar": "O",
+        "SettingSlowChar": "T",
+        "SettingMediumChar": "M",
+        "SettingFastChar": "S",
+        "SettingStartNoneChar": "F",
+        "SettingStartSolderingChar": "T",
+        "SettingStartSleepChar": "S",
+        "SettingStartSleepOffChar": "K",
+        "SettingSensitivityOff": "O",
+        "SettingSensitivityLow": "L",
+        "SettingSensitivityMedium": "M",
+        "SettingSensitivityHigh": "H",
+        "SettingLockDisableChar": "D",
+        "SettingLockBoostChar": "B",
+        "SettingLockFullChar": "F"
+    },
+    "menuGroups": {
+        "PowerMenu": {
+            "text2": [
+                "Power",
+                "settings"
+            ],
+            "desc": ""
+        },
+        "SolderingMenu": {
+            "text2": [
+                "Soldeer",
+                "Instellingen"
+            ],
+            "desc": ""
+        },
+        "PowerSavingMenu": {
+            "text2": [
+                "Slaap",
+                "standen"
+            ],
+            "desc": ""
+        },
+        "UIMenu": {
+            "text2": [
+                "Gebruikers-",
+                "Interface"
+            ],
+            "desc": ""
+        },
+        "AdvancedMenu": {
+            "text2": [
+                "Gevorderde",
+                "Instellingen"
+            ],
+            "desc": ""
+        }
+    },
+    "menuOptions": {
+        "DCInCutoff": {
+            "text2": [
+                "Spannings-",
+                "bron"
+            ],
+            "desc": "Spanningsbron. Stelt minimumspanning in. (DC 10V) (S 3.3V per cel)"
+        },
+        "MinVolCell": {
+            "text2": [
+                "Minimum",
+                "voltage"
+            ],
+            "desc": "Minimum allowed voltage per cell (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)"
+        },
+        "QCMaxVoltage": {
+            "text2": [
+                "Vermogen",
+                "Watt"
+            ],
+            "desc": "Vermogen van de adapter"
+        },
+        "PDNegTimeout": {
+            "text2": [
+                "PD",
+                "timeout"
+            ],
+            "desc": "PD negotiation timeout in 100ms steps for compatibility with some QC chargers"
+        },
+        "BoostTemperature": {
+            "text2": [
+                "Verhogings",
+                "temp"
+            ],
+            "desc": "Verhogingstemperatuur"
+        },
+        "AutoStart": {
+            "text2": [
+                "Auto",
+                "start"
+            ],
+            "desc": "Breng de soldeerbout op temperatuur bij het opstarten. (F=Uit | T=Soldeertemperatuur | S=Slaapstand-temperatuur | K=Slaapstand kamertemperatuur)"
+        },
+        "TempChangeShortStep": {
+            "text2": [
+                "Temp change",
+                "short"
+            ],
+            "desc": "Temperature-change-increment on short button press"
+        },
+        "TempChangeLongStep": {
+            "text2": [
+                "Temp change",
+                "long"
+            ],
+            "desc": "Temperature-change-increment on long button press"
+        },
+        "LockingMode": {
+            "text2": [
+                "Allow locking",
+                "buttons"
+            ],
+            "desc": "While soldering, hold down both buttons to toggle locking them (D=disable | B=boost mode only | F=full locking)"
+        },
+        "MotionSensitivity": {
+            "text2": [
+                "Bewegings-",
+                "gevoeligheid"
+            ],
+            "desc": "Bewegingsgevoeligheid (0=uit | 1=minst gevoelig | ... | 9=meest gevoelig)"
+        },
+        "SleepTemperature": {
+            "text2": [
+                "Slaap",
+                "temp"
+            ],
+            "desc": "Temperatuur in slaapstand (°C)"
+        },
+        "SleepTimeout": {
+            "text2": [
+                "Slaap",
+                "time-out"
+            ],
+            "desc": "Slaapstand time-out (Minuten | Seconden)"
+        },
+        "ShutdownTimeout": {
+            "text2": [
+                "Uitschakel",
+                "time-out"
+            ],
+            "desc": "Automatisch afsluiten time-out (Minuten)"
+        },
+        "HallEffSensitivity": {
+            "text2": [
+                "Hall sensor",
+                "sensitivity"
+            ],
+            "desc": "Sensitivity to magnets (0=uit | 1=minst gevoelig | ... | 9=meest gevoelig)"
+        },
+        "TemperatureUnit": {
+            "text2": [
+                "Temperatuur",
+                "schaal"
+            ],
+            "desc": "Temperatuurschaal (°C=Celsius | °F=Fahrenheit)"
+        },
+        "DisplayRotation": {
+            "text2": [
+                "Scherm-",
+                "oriëntatie"
+            ],
+            "desc": "Schermoriëntatie (R=Rechtshandig | L=Linkshandig | A=Automatisch)"
+        },
+        "CooldownBlink": {
+            "text2": [
+                "Afkoel",
+                "knipper"
+            ],
+            "desc": "Temperatuur knippert in hoofdmenu tijdens afkoeling."
+        },
+        "ScrollingSpeed": {
+            "text2": [
+                "Scrol",
+                "snelheid"
+            ],
+            "desc": "Scrolsnelheid van de tekst."
+        },
+        "ReverseButtonTempChange": {
+            "text2": [
+                "Swap",
+                "+ - keys"
+            ],
+            "desc": "Reverse assignment of buttons for temperature adjustment"
+        },
+        "AnimSpeed": {
+            "text2": [
+                "Anim.",
+                "speed"
+            ],
+            "desc": "Pace of icon animations in menu (O=off | T=slow | M=medium | S=fast)"
+        },
+        "AnimLoop": {
+            "text2": [
+                "Anim.",
+                "loop"
+            ],
+            "desc": "Loop icon animations in main menu"
+        },
+        "Brightness": {
+            "text2": [
+                "Screen",
+                "brightness"
+            ],
+            "desc": "Adjust the OLED screen brightness"
+        },
+        "ColourInversion": {
+            "text2": [
+                "Invert",
+                "screen"
+            ],
+            "desc": "Invert the OLED screen colors"
+        },
+        "LOGOTime": {
+            "text2": [
+                "Boot logo",
+                "duration"
+            ],
+            "desc": "Set boot logo duration (s=seconds)"
+        },
+        "AdvancedIdle": {
+            "text2": [
+                "Gedetailleerd",
+                "slaapscherm"
+            ],
+            "desc": "Gedetailleerde informatie in een kleiner lettertype in het slaapscherm."
+        },
+        "AdvancedSoldering": {
+            "text2": [
+                "Gedetailleerd",
+                "soldeerscherm"
+            ],
+            "desc": "Gedetailleerde informatie in kleiner lettertype in soldeerscherm."
+        },
+        "PowerLimit": {
+            "text2": [
+                "Power",
+                "limit"
+            ],
+            "desc": "Maximum power the iron can use (W=watt)"
+        },
+        "CalibrateCJC": {
+            "text2": [
+                "Calibrate CJC",
+                "at next boot"
+            ],
+            "desc": "At next boot tip Cold Junction Compensation will be calibrated (not required if Delta T is < 5°C)"
+        },
+        "VoltageCalibration": {
+            "text2": [
+                "Calibreer",
+                "voedingsspanning?"
+            ],
+            "desc": "VIN Calibreren. Bevestigen door knoppen lang in te drukken."
+        },
+        "PowerPulsePower": {
+            "text2": [
+                "Power",
+                "pulse"
+            ],
+            "desc": "Intensity of power of keep-awake-pulse (W=watt)"
+        },
+        "PowerPulseWait": {
+            "text2": [
+                "Power pulse",
+                "delay"
+            ],
+            "desc": "Delay before keep-awake-pulse is triggered (x 2.5s)"
+        },
+        "PowerPulseDuration": {
+            "text2": [
+                "Power pulse",
+                "duration"
+            ],
+            "desc": "Keep-awake-pulse duration (x 250ms)"
+        },
+        "SettingsReset": {
+            "text2": [
+                "Instellingen",
+                "resetten?"
+            ],
+            "desc": "Alle instellingen resetten."
+        },
+        "LanguageSwitch": {
+            "text2": [
+                "Spraak:",
+                " NL_BE   Vlaams"
+            ],
+            "desc": ""
+        }
+    }
+}

Translations/translation_NO.json

@@ -1,207 +0,0 @@
-{
-  "languageCode": "NO",
-  "languageLocalName": "Norsk",
-  "fonts": ["ascii_basic", "latin_extended"],
-  "tempUnitFahrenheit": false,
-  "messages": {
-    "SettingsCalibrationWarning": "Sørg for at loddespissen har romtemperatur før du fortsetter!",
-    "SettingsResetWarning": "Er du sikker på at du vil tilbakestille til standardinnstillinger?",
-    "UVLOWarningString": "Lavspenn",
-    "UndervoltageString": "Underspenning",
-    "InputVoltageString": "Innspenn.: ",
-    "SleepingSimpleString": "Zzzz",
-    "SleepingAdvancedString": "Dvale...",
-    "SleepingTipAdvancedString": "Spiss:",
-    "OffString": "Av"
-  },
-  "messagesWarn": {
-    "ResetOKMessage": "Reset OK",
-    "SettingsResetMessage": ["Certain settings", "were changed!"],
-    "NoAccelerometerMessage": ["No accelerometer", "detected!"],
-    "NoPowerDeliveryMessage": ["No USB-PD IC", "detected!"],
-    "LockingKeysString": "LOCKED",
-    "UnlockingKeysString": "UNLOCKED",
-    "WarningKeysLockedString": "!LOCKED!",
-    "WarningThermalRunaway": ["Thermal", "Runaway"]
-  },
-  "characters": {
-    "SettingRightChar": "H",
-    "SettingLeftChar": "V",
-    "SettingAutoChar": "A",
-    "SettingOffChar": "O",
-    "SettingSlowChar": "S",
-    "SettingMediumChar": "M",
-    "SettingFastChar": "F",
-    "SettingStartNoneChar": "I",
-    "SettingStartSolderingChar": "L",
-    "SettingStartSleepChar": "D",
-    "SettingStartSleepOffChar": "R",
-    "SettingSensitivityOff": "O",
-    "SettingSensitivityLow": "L",
-    "SettingSensitivityMedium": "M",
-    "SettingSensitivityHigh": "H",
-    "SettingLockDisableChar": "D",
-    "SettingLockBoostChar": "B",
-    "SettingLockFullChar": "F"
-  },
-  "menuGroups": {
-    "PowerMenu": {
-      "text2": ["Power", "settings"],
-      "desc": "Power settings"
-    },
-    "SolderingMenu": {
-      "text2": ["Lodde-", "innst."],
-      "desc": "Loddeinnstillinger"
-    },
-    "PowerSavingMenu": {
-      "text2": ["Dvale-", "innst."],
-      "desc": "Dvaleinnstillinger"
-    },
-    "UIMenu": {
-      "text2": ["Bruker-", "grensesn."],
-      "desc": "Brukergrensesnitt-innstillinger"
-    },
-    "AdvancedMenu": {
-      "text2": ["Avanserte", "valg"],
-      "desc": "Avanserte valg"
-    }
-  },
-  "menuOptions": {
-    "DCInCutoff": {
-      "text2": ["Kilde", ""],
-      "desc": "Strømforsyning. Sett nedre spenning for automatisk nedstenging. (DC 10V) (S 3.3V per celle)"
-    },
-    "SleepTemperature": {
-      "text2": ["DTmp", ""],
-      "desc": "Dvaletemperatur (C)"
-    },
-    "SleepTimeout": {
-      "text2": ["DTid", ""],
-      "desc": "Tid før dvale (Minutter | Sekunder)"
-    },
-    "ShutdownTimeout": {
-      "text2": ["AvTid", ""],
-      "desc": "Tid før automatisk nedstenging (Minutter)"
-    },
-    "MotionSensitivity": {
-      "text2": ["BSensr", ""],
-      "desc": "Bevegelsesfølsomhet (0=Inaktiv | 1=Minst følsom | ... | 9=Mest følsom)"
-    },
-    "TemperatureUnit": {
-      "text2": ["TmpEnh", ""],
-      "desc": "Temperaturskala (C=Celsius | F=Fahrenheit)"
-    },
-    "AdvancedIdle": {
-      "text2": ["AvDvSk", ""],
-      "desc": "Vis detaljert informasjon med liten skrift på dvaleskjermen."
-    },
-    "DisplayRotation": {
-      "text2": ["SkRetn", ""],
-      "desc": "Skjermretning (H=Høyrehendt | V=Venstrehendt | A=Automatisk)"
-    },
-    "BoostTemperature": {
-      "text2": ["KTmp", ""],
-      "desc": "Temperatur i \"kraft\"-modus"
-    },
-    "AutoStart": {
-      "text2": ["AStart", ""],
-      "desc": "Start automatisk med lodding når strøm kobles til. (I=Inaktiv | L=Lodding | D=Dvale | R=Dvale romtemperatur)"
-    },
-    "CooldownBlink": {
-      "text2": ["KjBlnk", ""],
-      "desc": "Blink temperaturen på skjermen mens spissen fortsatt er varm."
-    },
-    "TemperatureCalibration": {
-      "text2": ["TempKal?", ""],
-      "desc": "Kalibrer spiss-temperatur."
-    },
-    "SettingsReset": {
-      "text2": ["TilbStl?", ""],
-      "desc": "Tilbakestill alle innstillinger"
-    },
-    "VoltageCalibration": {
-      "text2": ["KalSpIn?", ""],
-      "desc": "Kalibrer spenning. Knappene justerer. Langt trykk for å gå ut"
-    },
-    "AdvancedSoldering": {
-      "text2": ["AvLdSk", ""],
-      "desc": "Vis detaljert informasjon ved lodding"
-    },
-    "ScrollingSpeed": {
-      "text2": ["RullHa", ""],
-      "desc": "Hastigheten på rulletekst"
-    },
-    "QCMaxVoltage": {
-      "text2": ["QC", "voltage"],
-      "desc": "Max QC voltage the iron should negotiate for"
-    },
-    "PDNegTimeout": {
-      "text2": ["PD", "timeout"],
-      "desc": "PD negotiation timeout in 100ms steps for compatibility with some QC chargers"
-    },
-    "PowerLimit": {
-      "text2": ["Power", "limit"],
-      "desc": "Maximum power the iron can use (W=watt)"
-    },
-    "ReverseButtonTempChange": {
-      "text2": ["Swap", "+ - keys"],
-      "desc": "Reverse assignment of buttons for temperature adjustment"
-    },
-    "TempChangeShortStep": {
-      "text2": ["Temp change", "short"],
-      "desc": "Temperature-change-increment on short button press"
-    },
-    "TempChangeLongStep": {
-      "text2": ["Temp change", "long"],
-      "desc": "Temperature-change-increment on long button press"
-    },
-    "PowerPulsePower": {
-      "text2": ["Power", "pulse"],
-      "desc": "Intensity of power of keep-awake-pulse (watt)"
-    },
-    "HallEffSensitivity": {
-      "text2": ["Hall sensor", "sensitivity"],
-      "desc": "Sensitivity of the Hall effect sensor to detect sleep (0=Inaktiv | 1=Minst følsom | ... | 9=Mest følsom)"
-    },
-    "LockingMode": {
-      "text2": ["Allow locking", "buttons"],
-      "desc": "While soldering, hold down both buttons to toggle locking them (D=disable | B=boost mode only | F=full locking)"
-    },
-    "MinVolCell": {
-      "text2": ["Minimum", "voltage"],
-      "desc": "Minimum allowed voltage per cell (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)"
-    },
-    "AnimLoop": {
-      "text2": ["Anim.", "loop"],
-      "desc": "Loop icon animations in main menu"
-    },
-    "AnimSpeed": {
-      "text2": ["Anim.", "speed"],
-      "desc": "Pace of icon animations in menu (O=off | S=slow | M=medium | F=fast)"
-    },
-    "PowerPulseWait": {
-      "text2": ["Power pulse", "delay"],
-      "desc": "Delay before keep-awake-pulse is triggered (x 2.5s)"
-    },
-    "PowerPulseDuration": {
-      "text2": ["Power pulse", "duration"],
-      "desc": "Keep-awake-pulse duration (x 250ms)"
-    },
-    "LanguageSwitch": {
-      "text2": ["Språk:", " NO       Norsk"],
-      "desc": ""
-    },
-    "Brightness": {
-      "text2": ["Screen", "brightness"],
-      "desc": "Adjust the brightness of the OLED screen"
-    },
-    "ColourInversion": {
-      "text2": ["Invert", "screen"],
-      "desc": "Invert the colours of the OLED screen"
-    },
-    "LOGOTime": {
-      "text2": ["Boot logo", "duration"],
-      "desc": "Sets the duration for the boot logo (s=seconds)"
-    }
-  }
-}

Translations/translation_PL.json

@@ -1,207 +1,341 @@
-{
-  "languageCode": "PL",
-  "languageLocalName": "Polski",
-  "fonts": ["ascii_basic", "latin_extended"],
-  "tempUnitFahrenheit": false,
-  "messages": {
-    "SettingsCalibrationWarning": "Przed kontynuowaniem upewnij się, że końcówka osiągnęła temperaturę pokojową!",
-    "SettingsResetWarning": "Czy na pewno chcesz przywrócić ustawienia fabryczne?",
-    "UVLOWarningString": "NIS. NAP",
-    "UndervoltageString": "Zbyt niskie nap.",
-    "InputVoltageString": "Nap. wej.:",
-    "SleepingSimpleString": "Zzz!",
-    "SleepingAdvancedString": "Tr. uśpienia",
-    "SleepingTipAdvancedString": "Grot:",
-    "OffString": "Wył"
-  },
-  "messagesWarn": {
-    "ResetOKMessage": "Reset OK",
-    "SettingsResetMessage": ["Ust. zresetowane", ""],
-    "NoAccelerometerMessage": ["Nie rozpoznano", "akcelerometru!"],
-    "NoPowerDeliveryMessage": ["Nie rozpoznano", "kont. USB-PD IC!"],
-    "LockingKeysString": " ZABLOK.",
-    "UnlockingKeysString": "ODBLOK.",
-    "WarningKeysLockedString": "!ZABLOK!",
-    "WarningThermalRunaway": ["Ucieczka", "termiczna"]
-  },
-  "characters": {
-    "SettingRightChar": "P",
-    "SettingLeftChar": "L",
-    "SettingAutoChar": "A",
-    "SettingOffChar": "O",
-    "SettingSlowChar": "W",
-    "SettingMediumChar": "M",
-    "SettingFastChar": "S",
-    "SettingStartNoneChar": "B",
-    "SettingStartSolderingChar": "T",
-    "SettingStartSleepChar": "Z",
-    "SettingStartSleepOffChar": "O",
-    "SettingSensitivityOff": "O",
-    "SettingSensitivityLow": "N",
-    "SettingSensitivityMedium": "Ś",
-    "SettingSensitivityHigh": "W",
-    "SettingLockDisableChar": "W",
-    "SettingLockBoostChar": "B",
-    "SettingLockFullChar": "P"
-  },
-  "menuGroups": {
-    "PowerMenu": {
-      "text2": ["Ustawienia", "zasilania"],
-      "desc": "Zasilanie i minimalne napięcie na komórkę"
-    },
-    "SolderingMenu": {
-      "text2": ["Lutowanie", ""],
-      "desc": "Ustawienia trybu lutowania"
-    },
-    "PowerSavingMenu": {
-      "text2": ["Oszcz.", "energii"],
-      "desc": "Ustawienia oszczędzania energii"
-    },
-    "UIMenu": {
-      "text2": ["Interfejs", "użytkownika"],
-      "desc": "Ustawienia interfejsu użytkownika"
-    },
-    "AdvancedMenu": {
-      "text2": ["Ustawienia", "zaawans."],
-      "desc": "Ustawienia zaawansowane"
-    }
-  },
-  "menuOptions": {
-    "DCInCutoff": {
-      "text2": ["Źródło", "zasilania"],
-      "desc": "Źródło zasilania. Ustaw napięcie odcięcia. (DC 10V) (S 3.3V dla ogniw Li, wyłącz limit mocy)"
-    },
-    "SleepTemperature": {
-      "text2": ["Temp.", "uśpienia"],
-      "desc": "Temperatura w trybie uśpienia (°C)"
-    },
-    "SleepTimeout": {
-      "text2": ["Czas do", "uśpienia"],
-      "desc": "Czas do przejścia w tryb uśpienia (minuty | sekundy)"
-    },
-    "ShutdownTimeout": {
-      "text2": ["Czas do", "wyłączenia"],
-      "desc": "Czas do wyłączenia (minuty)"
-    },
-    "MotionSensitivity": {
-      "text2": ["Czułość", "wykr. ruchu"],
-      "desc": "Czułość wykrywania ruchu (0: Wyłączona | 1: Minimalna | ... | 9: Maksymalna)"
-    },
-    "TemperatureUnit": {
-      "text2": ["Jednostka", "temperatury"],
-      "desc": "Jednostka temperatury (C: Celciusz | F: Fahrenheit)"
-    },
-    "AdvancedIdle": {
-      "text2": ["Szeczegółowy", "ekran bezczy."],
-      "desc": "Wyświetla szczegółowe informacje za pomocą mniejszej czcionki na ekranie bezczynności"
-    },
-    "DisplayRotation": {
-      "text2": ["Obrót", "ekranu"],
-      "desc": "Obrót ekranu (P: dla praworęcznych | L: dla leworęcznych | A: automatycznie)"
-    },
-    "BoostTemperature": {
-      "text2": ["Temp.", "boost"],
-      "desc": "Temperatura w trybie \"boost\" "
-    },
-    "AutoStart": {
-      "text2": ["Aut. uruch.", "tr. lutowania"],
-      "desc": "Automatyczne uruchamianie trybu lutowania po włączeniu zasilania. (B: wyłączone | T: lutowanie | Z: uśpienie | O: uśpienie w temp. pokojowej)"
-    },
-    "CooldownBlink": {
-      "text2": ["Mig. podczas", "wychładzania"],
-      "desc": "Temperatura miga podczas wychładzania, gdy grot jest wciąż gorący"
-    },
-    "TemperatureCalibration": {
-      "text2": ["Kalibracja", "temp. grotu"],
-      "desc": "Kalibracja temperatury grotu lutownicy"
-    },
-    "SettingsReset": {
-      "text2": ["Ustawienia", "fabryczne"],
-      "desc": "Resetuje wszystkie ustawienia"
-    },
-    "VoltageCalibration": {
-      "text2": ["Kalibracja", "napięcia"],
-      "desc": "Kalibracja napięcia wejściowego. Krótkie naciśnięcie, aby ustawić, długie naciśnięcie, aby wyjść."
-    },
-    "AdvancedSoldering": {
-      "text2": ["Sz. inf. w", "tr. lutowania"],
-      "desc": "Wyświetl szczegółowe informacje w trybie lutowania"
-    },
-    "ScrollingSpeed": {
-      "text2": ["Sz. przew.", "tekstu"],
-      "desc": "Szybkość przewijania tekstu"
-    },
-    "QCMaxVoltage": {
-      "text2": ["Moc", "w W"],
-      "desc": "Moc używanego zasilacza w (W)"
-    },
-    "PDNegTimeout": {
-      "text2": ["Limit czasu", "PD"],
-      "desc": "Limit czasu negocjacji PD w krokach co 100 ms dla zgodności z niektórymi ładowarkami QC (0: wyłączone)"
-    },
-    "PowerLimit": {
-      "text2": ["Ogr.", "mocy"],
-      "desc": "Maksymalna moc (W), jakiej może użyć lutownica"
-    },
-    "ReverseButtonTempChange": {
-      "text2": ["Zamień przyc.", "+ -"],
-      "desc": "Zamienia działanie przycisków zmiany temperatury grotu"
-    },
-    "TempChangeShortStep": {
-      "text2": ["Zm. temp.", "kr. przyc."],
-      "desc": "Wartość zmiany temperatury, po krótkim przyciśnięciu (°C)"
-    },
-    "TempChangeLongStep": {
-      "text2": ["Zm. temp.", "dł. przyc."],
-      "desc": "Wartość zmiany temperatury, po długim przyciśnięciu (°C)"
-    },
-    "PowerPulsePower": {
-      "text2": ["Moc", "impulsu"],
-      "desc": "W przypadku używania powerbanku, utrzymuj moc na poziomie (W) aby nie uśpić powerbanku"
-    },
-    "HallEffSensitivity": {
-      "text2": ["Czułość", "cz. Halla"],
-      "desc": "Czułość czujnika Halla, używanego do przechodznia w tryb uśpienia (0: Wyłączona | 1: Minimalna | ... | 9: Maksymalna)"
-    },
-    "LockingMode": {
-      "text2": ["Blokada", "przycisków"],
-      "desc": "W trybie lutowania, wciśnij oba przyciski aby je zablokować (O=Wyłączona | B=tylko Boost | P=pełna blokada)"
-    },
-    "MinVolCell": {
-      "text2": ["Minimalne", "napięcie"],
-      "desc": "Minimalne dozwolone napięcie na komórkę (3S: 3 - 3,7V | 4-6S: 2,4 - 3,7V)"
-    },
-    "AnimLoop": {
-      "text2": ["Zapętlona", "animacja"],
-      "desc": "Zapętla animację ikon w menu głównym"
-    },
-    "AnimSpeed": {
-      "text2": ["Prędkosć", "animacji"],
-      "desc": "Prędkość animacji ikon w menu (O: wył. | W: mała | M: średnia | S: duża)"
-    },
-    "PowerPulseWait": {
-      "text2": ["Czas między", "imp. mocy"],
-      "desc": "Czas między kolejnymi impulsami mocy zapobiegającymi usypianiu powerbanku (x2,5 s)"
-    },
-    "PowerPulseDuration": {
-      "text2": ["Długość", "impulsu mocy"],
-      "desc": "Długość impulsu mocy zapobiegającego usypianiu powerbanku (x250 ms)"
-    },
-    "LanguageSwitch": {
-      "text2": ["Język :", " PL      Polski"],
-      "desc": ""
-    },
-    "Brightness": {
-      "text2": ["Jasność", "wyświetlacza"],
-      "desc": "Regulacja kontrastu/jasności wyświetlacza OLED"
-    },
-    "ColourInversion": {
-      "text2": ["Odwrócenie", "kolorów"],
-      "desc": "Odwrócenie kolorów wyświetlacza OLED"
-    },
-    "LOGOTime": {
-      "text2": ["Boot logo", "duration"],
-      "desc": "Sets the duration for the boot logo (s=seconds)"
-    }
-  }
-}
+{
+    "languageCode": "PL",
+    "languageLocalName": "Polski",
+    "tempUnitFahrenheit": false,
+    "messages": {
+        "SettingsCalibrationWarning": "Upewnij się, że końcówka i uchwyt mają temperaturę pokojową podczas następnego rozruchu!",
+        "CJCCalibrating": "kalibracja",
+        "SettingsResetWarning": "Czy na pewno chcesz przywrócić ustawienia fabryczne?",
+        "UVLOWarningString": "NIS. NAP",
+        "UndervoltageString": "Zbyt niskie nap.",
+        "InputVoltageString": "Nap. wej.:",
+        "SleepingSimpleString": "Zzz!",
+        "SleepingAdvancedString": "Tr. uśpienia",
+        "SleepingTipAdvancedString": "Grot:",
+        "OffString": "Wył",
+        "DeviceFailedValidationWarning": "Twoje urządzenie jest najprawdopodobniej podróbką!"
+    },
+    "messagesWarn": {
+        "CJCCalibrationDone": [
+            "Calibration",
+            "done!"
+        ],
+        "ResetOKMessage": "Reset OK",
+        "SettingsResetMessage": [
+            "Ust. zresetowane",
+            ""
+        ],
+        "NoAccelerometerMessage": [
+            "Nie rozpoznano",
+            "akcelerometru!"
+        ],
+        "NoPowerDeliveryMessage": [
+            "Nie rozpoznano",
+            "kont. USB-PD IC!"
+        ],
+        "LockingKeysString": " ZABLOK.",
+        "UnlockingKeysString": "ODBLOK.",
+        "WarningKeysLockedString": "!ZABLOK!",
+        "WarningThermalRunaway": [
+            "Ucieczka",
+            "termiczna"
+        ]
+    },
+    "characters": {
+        "SettingRightChar": "P",
+        "SettingLeftChar": "L",
+        "SettingAutoChar": "A",
+        "SettingOffChar": "O",
+        "SettingSlowChar": "W",
+        "SettingMediumChar": "M",
+        "SettingFastChar": "S",
+        "SettingStartNoneChar": "B",
+        "SettingStartSolderingChar": "T",
+        "SettingStartSleepChar": "Z",
+        "SettingStartSleepOffChar": "O",
+        "SettingSensitivityOff": "O",
+        "SettingSensitivityLow": "N",
+        "SettingSensitivityMedium": "Ś",
+        "SettingSensitivityHigh": "W",
+        "SettingLockDisableChar": "W",
+        "SettingLockBoostChar": "B",
+        "SettingLockFullChar": "P"
+    },
+    "menuGroups": {
+        "PowerMenu": {
+            "text2": [
+                "Ustawienia",
+                "zasilania"
+            ],
+            "desc": ""
+        },
+        "SolderingMenu": {
+            "text2": [
+                "Lutowanie",
+                ""
+            ],
+            "desc": ""
+        },
+        "PowerSavingMenu": {
+            "text2": [
+                "Oszcz.",
+                "energii"
+            ],
+            "desc": ""
+        },
+        "UIMenu": {
+            "text2": [
+                "Interfejs",
+                "użytkownika"
+            ],
+            "desc": ""
+        },
+        "AdvancedMenu": {
+            "text2": [
+                "Ustawienia",
+                "zaawans."
+            ],
+            "desc": ""
+        }
+    },
+    "menuOptions": {
+        "DCInCutoff": {
+            "text2": [
+                "Źródło",
+                "zasilania"
+            ],
+            "desc": "Źródło zasilania. Ustaw napięcie odcięcia. (DC 10V) (S 3.3V dla ogniw Li, wyłącz limit mocy)"
+        },
+        "MinVolCell": {
+            "text2": [
+                "Minimalne",
+                "napięcie"
+            ],
+            "desc": "Minimalne dozwolone napięcie na komórkę (3S: 3 - 3,7V | 4-6S: 2,4 - 3,7V)"
+        },
+        "QCMaxVoltage": {
+            "text2": [
+                "QC",
+                "napięcie"
+            ],
+            "desc": "Maksymalne napięcie, które lutownica będzie próbowała wynegocjować z ładowarką Quick Charge (V)"
+        },
+        "PDNegTimeout": {
+            "text2": [
+                "Limit czasu",
+                "PD"
+            ],
+            "desc": "Limit czasu negocjacji PD w krokach co 100 ms dla zgodności z niektórymi ładowarkami QC (0: wyłączone)"
+        },
+        "BoostTemperature": {
+            "text2": [
+                "Temp.",
+                "boost"
+            ],
+            "desc": "Temperatura w trybie \"boost\" "
+        },
+        "AutoStart": {
+            "text2": [
+                "Aut. uruch.",
+                "tr. lutowania"
+            ],
+            "desc": "Automatyczne uruchamianie trybu lutowania po włączeniu zasilania. (B: wyłączone | T: lutowanie | Z: uśpienie | O: uśpienie w temp. pokojowej)"
+        },
+        "TempChangeShortStep": {
+            "text2": [
+                "Zm. temp.",
+                "kr. przyc."
+            ],
+            "desc": "Wartość zmiany temperatury, po krótkim przyciśnięciu (°C)"
+        },
+        "TempChangeLongStep": {
+            "text2": [
+                "Zm. temp.",
+                "dł. przyc."
+            ],
+            "desc": "Wartość zmiany temperatury, po długim przyciśnięciu (°C)"
+        },
+        "LockingMode": {
+            "text2": [
+                "Blokada",
+                "przycisków"
+            ],
+            "desc": "W trybie lutowania, wciśnij oba przyciski aby je zablokować (O=Wyłączona | B=tylko Boost | P=pełna blokada)"
+        },
+        "MotionSensitivity": {
+            "text2": [
+                "Czułość",
+                "wykr. ruchu"
+            ],
+            "desc": "Czułość wykrywania ruchu (0: Wyłączona | 1: Minimalna | ... | 9: Maksymalna)"
+        },
+        "SleepTemperature": {
+            "text2": [
+                "Temp.",
+                "uśpienia"
+            ],
+            "desc": "Temperatura w trybie uśpienia (°C)"
+        },
+        "SleepTimeout": {
+            "text2": [
+                "Czas do",
+                "uśpienia"
+            ],
+            "desc": "Czas do przejścia w tryb uśpienia (minuty | sekundy)"
+        },
+        "ShutdownTimeout": {
+            "text2": [
+                "Czas do",
+                "wyłączenia"
+            ],
+            "desc": "Czas do wyłączenia (minuty)"
+        },
+        "HallEffSensitivity": {
+            "text2": [
+                "Czułość",
+                "cz. Halla"
+            ],
+            "desc": "Czułość czujnika Halla, używanego do przechodznia w tryb uśpienia (0: Wyłączona | 1: Minimalna | ... | 9: Maksymalna)"
+        },
+        "TemperatureUnit": {
+            "text2": [
+                "Jednostka",
+                "temperatury"
+            ],
+            "desc": "Jednostka temperatury (C: Celciusz | F: Fahrenheit)"
+        },
+        "DisplayRotation": {
+            "text2": [
+                "Obrót",
+                "ekranu"
+            ],
+            "desc": "Obrót ekranu (P: dla praworęcznych | L: dla leworęcznych | A: automatycznie)"
+        },
+        "CooldownBlink": {
+            "text2": [
+                "Mig. podczas",
+                "wychładzania"
+            ],
+            "desc": "Temperatura miga podczas wychładzania, gdy grot jest wciąż gorący"
+        },
+        "ScrollingSpeed": {
+            "text2": [
+                "Sz. przew.",
+                "tekstu"
+            ],
+            "desc": "Szybkość przewijania tekstu"
+        },
+        "ReverseButtonTempChange": {
+            "text2": [
+                "Zamień przyc.",
+                "+ -"
+            ],
+            "desc": "Zamienia działanie przycisków zmiany temperatury grotu"
+        },
+        "AnimSpeed": {
+            "text2": [
+                "Prędkosć",
+                "animacji"
+            ],
+            "desc": "Prędkość animacji ikon w menu (O: wył. | W: mała | M: średnia | S: duża)"
+        },
+        "AnimLoop": {
+            "text2": [
+                "Zapętlona",
+                "animacja"
+            ],
+            "desc": "Zapętla animację ikon w menu głównym"
+        },
+        "Brightness": {
+            "text2": [
+                "Jasność",
+                "wyświetlacza"
+            ],
+            "desc": "Regulacja kontrastu/jasności wyświetlacza OLED"
+        },
+        "ColourInversion": {
+            "text2": [
+                "Odwrócenie",
+                "kolorów"
+            ],
+            "desc": "Odwrócenie kolorów wyświetlacza OLED"
+        },
+        "LOGOTime": {
+            "text2": [
+                "Długość wyś.",
+                "loga"
+            ],
+            "desc": "Ustawia czas wyświetlania loga podczas uruchamiania (s=sekund)"
+        },
+        "AdvancedIdle": {
+            "text2": [
+                "Szeczegółowy",
+                "ekran bezczy."
+            ],
+            "desc": "Wyświetla szczegółowe informacje za pomocą mniejszej czcionki na ekranie bezczynności"
+        },
+        "AdvancedSoldering": {
+            "text2": [
+                "Sz. inf. w",
+                "tr. lutowania"
+            ],
+            "desc": "Wyświetl szczegółowe informacje w trybie lutowania"
+        },
+        "PowerLimit": {
+            "text2": [
+                "Ogr.",
+                "mocy"
+            ],
+            "desc": "Maksymalna moc (W), jakiej może użyć lutownica"
+        },
+        "CalibrateCJC": {
+            "text2": [
+                "Kalibracja temperatury",
+                "przy następnym uruchomieniu"
+            ],
+            "desc": "At next boot tip Cold Junction Compensation will be calibrated (not required if Delta T is < 5°C)"
+        },
+        "VoltageCalibration": {
+            "text2": [
+                "Kalibracja",
+                "napięcia"
+            ],
+            "desc": "Kalibracja napięcia wejściowego. Krótkie naciśnięcie, aby ustawić, długie naciśnięcie, aby wyjść."
+        },
+        "PowerPulsePower": {
+            "text2": [
+                "Moc",
+                "impulsu"
+            ],
+            "desc": "W przypadku używania powerbanku, utrzymuj moc na poziomie (W) aby nie uśpić powerbanku"
+        },
+        "PowerPulseWait": {
+            "text2": [
+                "Czas między",
+                "imp. mocy"
+            ],
+            "desc": "Czas między kolejnymi impulsami mocy zapobiegającymi usypianiu powerbanku (x2,5 s)"
+        },
+        "PowerPulseDuration": {
+            "text2": [
+                "Długość",
+                "impulsu mocy"
+            ],
+            "desc": "Długość impulsu mocy zapobiegającego usypianiu powerbanku (x250 ms)"
+        },
+        "SettingsReset": {
+            "text2": [
+                "Ustawienia",
+                "fabryczne"
+            ],
+            "desc": "Resetuje wszystkie ustawienia"
+        },
+        "LanguageSwitch": {
+            "text2": [
+                "Język:",
+                " PL      Polski"
+            ],
+            "desc": ""
+        }
+    }
+}

Translations/translation_PT.json

@@ -1,207 +1,341 @@
-{
-  "languageCode": "PT",
-  "languageLocalName": "Português",
-  "fonts": ["ascii_basic", "latin_extended"],
-  "tempUnitFahrenheit": false,
-  "messages": {
-    "SettingsCalibrationWarning": "A ponta deve estar à temperatura ambiente antes de continuar!",
-    "SettingsResetWarning": "Definições de fábrica?",
-    "UVLOWarningString": "DC BAIXO",
-    "UndervoltageString": "Subtensão",
-    "InputVoltageString": "Tensão ",
-    "SleepingSimpleString": "Zzzz",
-    "SleepingAdvancedString": "Repouso...",
-    "SleepingTipAdvancedString": "Ponta:",
-    "OffString": "Off"
-  },
-  "messagesWarn": {
-    "ResetOKMessage": "Reset OK",
-    "SettingsResetMessage": ["Certain settings", "were changed!"],
-    "NoAccelerometerMessage": ["No accelerometer", "detected!"],
-    "NoPowerDeliveryMessage": ["No USB-PD IC", "detected!"],
-    "LockingKeysString": "LOCKED",
-    "UnlockingKeysString": "UNLOCKED",
-    "WarningKeysLockedString": "!LOCKED!",
-    "WarningThermalRunaway": ["Thermal", "Runaway"]
-  },
-  "characters": {
-    "SettingRightChar": "D",
-    "SettingLeftChar": "C",
-    "SettingAutoChar": "A",
-    "SettingOffChar": "O",
-    "SettingSlowChar": "S",
-    "SettingMediumChar": "M",
-    "SettingFastChar": "F",
-    "SettingStartNoneChar": "D",
-    "SettingStartSolderingChar": "S",
-    "SettingStartSleepChar": "H",
-    "SettingStartSleepOffChar": "A",
-    "SettingSensitivityOff": "O",
-    "SettingSensitivityLow": "L",
-    "SettingSensitivityMedium": "M",
-    "SettingSensitivityHigh": "H",
-    "SettingLockDisableChar": "D",
-    "SettingLockBoostChar": "B",
-    "SettingLockFullChar": "F"
-  },
-  "menuGroups": {
-    "PowerMenu": {
-      "text2": ["Power", "settings"],
-      "desc": "Power settings"
-    },
-    "SolderingMenu": {
-      "text2": ["Configurações", "Solda"],
-      "desc": "Configurações de soldagem"
-    },
-    "PowerSavingMenu": {
-      "text2": ["Modos", "Repouso"],
-      "desc": "Configurações de economia de energia"
-    },
-    "UIMenu": {
-      "text2": ["Interface", "Utilizador"],
-      "desc": "Configurações do interface do utilizador"
-    },
-    "AdvancedMenu": {
-      "text2": ["Menu", "Avançado"],
-      "desc": "Opções avançadas"
-    }
-  },
-  "menuOptions": {
-    "DCInCutoff": {
-      "text2": ["Fonte", "alimentação"],
-      "desc": "Fonte de alimentação. Define a tensão de corte. (DC=10V) (S=3.3V/célula)"
-    },
-    "SleepTemperature": {
-      "text2": ["Temperat.", "repouso"],
-      "desc": "Temperatura de repouso (C)"
-    },
-    "SleepTimeout": {
-      "text2": ["Tempo", "repouso"],
-      "desc": "Tempo para repouso (Minutos | Segundos)"
-    },
-    "ShutdownTimeout": {
-      "text2": ["Tempo", "desligam."],
-      "desc": "Tempo para desligamento (Minutos)"
-    },
-    "MotionSensitivity": {
-      "text2": ["Sensibilidade", "movimento"],
-      "desc": "Sensibilidade ao movimento (0=Desligado | 1=Menor | ... | 9=Maior)"
-    },
-    "TemperatureUnit": {
-      "text2": ["Unidade", "temperatura"],
-      "desc": "Unidade de temperatura (C=Celsius | F=Fahrenheit)"
-    },
-    "AdvancedIdle": {
-      "text2": ["Tela repouso", "avançada"],
-      "desc": "Exibe informações avançadas quando em espera"
-    },
-    "DisplayRotation": {
-      "text2": ["Orientação", "tela"],
-      "desc": "Orientação da tela (D=estro | C=anhoto | A=utomática)"
-    },
-    "BoostTemperature": {
-      "text2": ["Modo turbo", "temperat."],
-      "desc": "Ajuste de temperatura do modo \"turbo\""
-    },
-    "AutoStart": {
-      "text2": ["Partida", "automática"],
-      "desc": "Aquece a ponta automaticamente ao ligar (D=desligar | S=soldagem | H=hibernar | A=hibernar temp. ambiente)"
-    },
-    "CooldownBlink": {
-      "text2": ["Piscar ao", "arrefecer"],
-      "desc": "Faz o valor da temperatura piscar durante o arrefecimento"
-    },
-    "TemperatureCalibration": {
-      "text2": ["Calibrar", "temperatura"],
-      "desc": "Calibra a temperatura"
-    },
-    "SettingsReset": {
-      "text2": ["Reset de", "fábrica?"],
-      "desc": "Reverte todos ajustes"
-    },
-    "VoltageCalibration": {
-      "text2": ["Calibrar", "tensão"],
-      "desc": "Calibra a tensão de alimentação. Use os botões para ajustar o valor. Mantenha pressionado para sair"
-    },
-    "AdvancedSoldering": {
-      "text2": ["Tela trabalho", "avançada"],
-      "desc": "Exibe informações avançadas durante o uso"
-    },
-    "ScrollingSpeed": {
-      "text2": ["Velocidade", "texto ajuda"],
-      "desc": "Velocidade a que o texto é exibido"
-    },
-    "QCMaxVoltage": {
-      "text2": ["Potência", "Fonte"],
-      "desc": "Potência da fonte usada (Watt)"
-    },
-    "PDNegTimeout": {
-      "text2": ["PD", "timeout"],
-      "desc": "PD negotiation timeout in 100ms steps for compatibility with some QC chargers (0: disabled)"
-    },
-    "PowerLimit": {
-      "text2": ["Power", "limit"],
-      "desc": "Maximum power the iron can use (Watts)"
-    },
-    "ReverseButtonTempChange": {
-      "text2": ["Key +-", "reverse?"],
-      "desc": "Reverse the tip temperature change buttons plus minus assignment."
-    },
-    "TempChangeShortStep": {
-      "text2": ["Temp change", "short?"],
-      "desc": "Temperature change steps on short button press!"
-    },
-    "TempChangeLongStep": {
-      "text2": ["Temp change", "long?"],
-      "desc": "Temperature change steps on long button press!"
-    },
-    "PowerPulsePower": {
-      "text2": ["Power", "Pulse W"],
-      "desc": "Keep awake pulse power intensity"
-    },
-    "HallEffSensitivity": {
-      "text2": ["Hall Eff", "Sensitivity"],
-      "desc": "Sensitivity of the Hall effect sensor in detecting sleep (0=Desligado | 1=Menor | ... | 9=Maior)"
-    },
-    "LockingMode": {
-      "text2": ["Allow buttons", "locking"],
-      "desc": "When soldering, long press on both buttons lock them (D=Disable | B=Boost only | F=Full locking)"
-    },
-    "MinVolCell": {
-      "text2": ["Minimum", "voltage"],
-      "desc": "Minimum allowed voltage per cell (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)"
-    },
-    "AnimLoop": {
-      "text2": ["Anim.", "loop"],
-      "desc": "Loop icon animations in root menu"
-    },
-    "AnimSpeed": {
-      "text2": ["Anim.", "speed"],
-      "desc": "Pace of icon animations in menu (O=off | S=slow | M=medium | F=fast)"
-    },
-    "PowerPulseWait": {
-      "text2": ["Power pulse", "delay"],
-      "desc": "Delay before keep-awake-pulse is triggered (x 2.5s)"
-    },
-    "PowerPulseDuration": {
-      "text2": ["Power pulse", "duration"],
-      "desc": "Keep-awake-pulse duration (x 250ms)"
-    },
-    "LanguageSwitch": {
-      "text2": ["Idioma :", " PT   Português"],
-      "desc": ""
-    },
-    "Brightness": {
-      "text2": ["Screen", "brightness"],
-      "desc": "Adjust the brightness of the OLED screen"
-    },
-    "ColourInversion": {
-      "text2": ["Invert", "screen"],
-      "desc": "Invert the colours of the OLED screen"
-    },
-    "LOGOTime": {
-      "text2": ["Boot logo", "duration"],
-      "desc": "Sets the duration for the boot logo (s=seconds)"
-    }
-  }
-}
+{
+    "languageCode": "PT",
+    "languageLocalName": "Português",
+    "tempUnitFahrenheit": false,
+    "messages": {
+        "SettingsCalibrationWarning": "Before rebooting, make sure tip & handle are at room temperature!",
+        "CJCCalibrating": "calibrating",
+        "SettingsResetWarning": "Definições de fábrica?",
+        "UVLOWarningString": "DC BAIXO",
+        "UndervoltageString": "Subtensão",
+        "InputVoltageString": "Tensão ",
+        "SleepingSimpleString": "Zzzz",
+        "SleepingAdvancedString": "Repouso...",
+        "SleepingTipAdvancedString": "Ponta:",
+        "OffString": "Off",
+        "DeviceFailedValidationWarning": "Your device is most likely a counterfeit!"
+    },
+    "messagesWarn": {
+        "CJCCalibrationDone": [
+            "Calibration",
+            "done!"
+        ],
+        "ResetOKMessage": "Reset OK",
+        "SettingsResetMessage": [
+            "Certain settings",
+            "were changed!"
+        ],
+        "NoAccelerometerMessage": [
+            "No accelerometer",
+            "detected!"
+        ],
+        "NoPowerDeliveryMessage": [
+            "No USB-PD IC",
+            "detected!"
+        ],
+        "LockingKeysString": "LOCKED",
+        "UnlockingKeysString": "UNLOCKED",
+        "WarningKeysLockedString": "!LOCKED!",
+        "WarningThermalRunaway": [
+            "Thermal",
+            "Runaway"
+        ]
+    },
+    "characters": {
+        "SettingRightChar": "D",
+        "SettingLeftChar": "C",
+        "SettingAutoChar": "A",
+        "SettingOffChar": "O",
+        "SettingSlowChar": "S",
+        "SettingMediumChar": "M",
+        "SettingFastChar": "F",
+        "SettingStartNoneChar": "D",
+        "SettingStartSolderingChar": "S",
+        "SettingStartSleepChar": "H",
+        "SettingStartSleepOffChar": "A",
+        "SettingSensitivityOff": "O",
+        "SettingSensitivityLow": "L",
+        "SettingSensitivityMedium": "M",
+        "SettingSensitivityHigh": "H",
+        "SettingLockDisableChar": "D",
+        "SettingLockBoostChar": "B",
+        "SettingLockFullChar": "F"
+    },
+    "menuGroups": {
+        "PowerMenu": {
+            "text2": [
+                "Power",
+                "settings"
+            ],
+            "desc": ""
+        },
+        "SolderingMenu": {
+            "text2": [
+                "Configurações",
+                "Solda"
+            ],
+            "desc": ""
+        },
+        "PowerSavingMenu": {
+            "text2": [
+                "Modos",
+                "Repouso"
+            ],
+            "desc": ""
+        },
+        "UIMenu": {
+            "text2": [
+                "Interface",
+                "Utilizador"
+            ],
+            "desc": ""
+        },
+        "AdvancedMenu": {
+            "text2": [
+                "Menu",
+                "Avançado"
+            ],
+            "desc": ""
+        }
+    },
+    "menuOptions": {
+        "DCInCutoff": {
+            "text2": [
+                "Fonte",
+                "alimentação"
+            ],
+            "desc": "Fonte de alimentação. Define a tensão de corte. (DC=10V) (S=3.3V/célula)"
+        },
+        "MinVolCell": {
+            "text2": [
+                "Minimum",
+                "voltage"
+            ],
+            "desc": "Minimum allowed voltage per battery cell (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)"
+        },
+        "QCMaxVoltage": {
+            "text2": [
+                "Potência",
+                "Fonte"
+            ],
+            "desc": "Potência da fonte usada (Watt)"
+        },
+        "PDNegTimeout": {
+            "text2": [
+                "PD",
+                "timeout"
+            ],
+            "desc": "PD negotiation timeout in 100ms steps for compatibility with some QC chargers (0: disabled)"
+        },
+        "BoostTemperature": {
+            "text2": [
+                "Modo turbo",
+                "temperat."
+            ],
+            "desc": "Ajuste de temperatura do \"modo turbo\""
+        },
+        "AutoStart": {
+            "text2": [
+                "Partida",
+                "automática"
+            ],
+            "desc": "Aquece a ponta automaticamente ao ligar (D=desligar | S=soldagem | H=hibernar | A=hibernar temp. ambiente)"
+        },
+        "TempChangeShortStep": {
+            "text2": [
+                "Temp change",
+                "short"
+            ],
+            "desc": "Temperature-change-increment on short button press"
+        },
+        "TempChangeLongStep": {
+            "text2": [
+                "Temp change",
+                "long"
+            ],
+            "desc": "Temperature-change-increment on long button press"
+        },
+        "LockingMode": {
+            "text2": [
+                "Allow locking",
+                "buttons"
+            ],
+            "desc": "While soldering, hold down both buttons to toggle locking them (D=disable | B=boost mode only | F=full locking)"
+        },
+        "MotionSensitivity": {
+            "text2": [
+                "Sensibilidade",
+                "movimento"
+            ],
+            "desc": "Sensibilidade ao movimento (0=Desligado | 1=Menor | ... | 9=Maior)"
+        },
+        "SleepTemperature": {
+            "text2": [
+                "Temperat.",
+                "repouso"
+            ],
+            "desc": "Temperatura de repouso (C)"
+        },
+        "SleepTimeout": {
+            "text2": [
+                "Tempo",
+                "repouso"
+            ],
+            "desc": "Tempo para repouso (Minutos | Segundos)"
+        },
+        "ShutdownTimeout": {
+            "text2": [
+                "Tempo",
+                "desligam."
+            ],
+            "desc": "Tempo para desligamento (Minutos)"
+        },
+        "HallEffSensitivity": {
+            "text2": [
+                "Hall sensor",
+                "sensitivity"
+            ],
+            "desc": "Sensitivity to magnets (0=Desligado | 1=Menor | ... | 9=Maior)"
+        },
+        "TemperatureUnit": {
+            "text2": [
+                "Unidade",
+                "temperatura"
+            ],
+            "desc": "Unidade de temperatura (C=Celsius | F=Fahrenheit)"
+        },
+        "DisplayRotation": {
+            "text2": [
+                "Orientação",
+                "tela"
+            ],
+            "desc": "Orientação da tela (D=estro | C=anhoto | A=utomática)"
+        },
+        "CooldownBlink": {
+            "text2": [
+                "Piscar ao",
+                "arrefecer"
+            ],
+            "desc": "Faz o valor da temperatura piscar durante o arrefecimento"
+        },
+        "ScrollingSpeed": {
+            "text2": [
+                "Velocidade",
+                "texto ajuda"
+            ],
+            "desc": "Velocidade a que o texto é exibido"
+        },
+        "ReverseButtonTempChange": {
+            "text2": [
+                "Swap",
+                "+ - keys"
+            ],
+            "desc": "Reverse assignment of buttons for temperature adjustment"
+        },
+        "AnimSpeed": {
+            "text2": [
+                "Anim.",
+                "speed"
+            ],
+            "desc": "Pace of icon animations in menu (O=off | S=slow | M=medium | F=fast)"
+        },
+        "AnimLoop": {
+            "text2": [
+                "Anim.",
+                "loop"
+            ],
+            "desc": "Loop icon animations in main menu"
+        },
+        "Brightness": {
+            "text2": [
+                "Screen",
+                "brightness"
+            ],
+            "desc": "Adjust the OLED screen brightness"
+        },
+        "ColourInversion": {
+            "text2": [
+                "Invert",
+                "screen"
+            ],
+            "desc": "Invert the OLED screen colors"
+        },
+        "LOGOTime": {
+            "text2": [
+                "Boot logo",
+                "duration"
+            ],
+            "desc": "Set boot logo duration (s=seconds)"
+        },
+        "AdvancedIdle": {
+            "text2": [
+                "Tela repouso",
+                "avançada"
+            ],
+            "desc": "Exibe informações avançadas quando em espera"
+        },
+        "AdvancedSoldering": {
+            "text2": [
+                "Tela trabalho",
+                "avançada"
+            ],
+            "desc": "Exibe informações avançadas durante o uso"
+        },
+        "PowerLimit": {
+            "text2": [
+                "Power",
+                "limit"
+            ],
+            "desc": "Maximum power the iron can use (W=watt)"
+        },
+        "CalibrateCJC": {
+            "text2": [
+                "Calibrate CJC",
+                "at next boot"
+            ],
+            "desc": "At next boot tip Cold Junction Compensation will be calibrated (not required if Delta T is < 5°C)"
+        },
+        "VoltageCalibration": {
+            "text2": [
+                "Calibrar",
+                "tensão"
+            ],
+            "desc": "Calibra a tensão de alimentação. Use os botões para ajustar o valor. Mantenha pressionado para sair"
+        },
+        "PowerPulsePower": {
+            "text2": [
+                "Power",
+                "pulse"
+            ],
+            "desc": "Intensity of power of keep-awake-pulse (W=watt)"
+        },
+        "PowerPulseWait": {
+            "text2": [
+                "Power pulse",
+                "delay"
+            ],
+            "desc": "Delay before keep-awake-pulse is triggered (x 2.5s)"
+        },
+        "PowerPulseDuration": {
+            "text2": [
+                "Power pulse",
+                "duration"
+            ],
+            "desc": "Keep-awake-pulse duration (x 250ms)"
+        },
+        "SettingsReset": {
+            "text2": [
+                "Reset de",
+                "fábrica?"
+            ],
+            "desc": "Reverte todos ajustes"
+        },
+        "LanguageSwitch": {
+            "text2": [
+                "Idioma:",
+                " PT   Português"
+            ],
+            "desc": ""
+        }
+    }
+}

Translations/translation_RO.json

@@ -1,207 +1,341 @@
-{
-  "languageCode": "RO",
-  "languageLocalName": "Română",
-  "fonts": ["ascii_basic", "latin_extended"],
-  "tempUnitFahrenheit": true,
-  "messages": {
-    "SettingsCalibrationWarning": "Vă rugăm să vă asigurati că vârful este la temperatura camerei, înainte de a continua!",
-    "SettingsResetWarning": "Sigur doriti să restaurati la setările implicite?",
-    "UVLOWarningString": "DC LOW",
-    "UndervoltageString": "Sub tensiune",
-    "InputVoltageString": "Intrare V: ",
-    "SleepingSimpleString": "Zzzz",
-    "SleepingAdvancedString": "Adormit...",
-    "SleepingTipAdvancedString": "Tip:",
-    "OffString": "Nu"
-  },
-  "messagesWarn": {
-    "ResetOKMessage": "Reset OK",
-    "SettingsResetMessage": ["Setările au fost", "resetate!"],
-    "NoAccelerometerMessage": ["Nu accelerometru", "detectat!"],
-    "NoPowerDeliveryMessage": ["Fără USB-PD IC", "detectat!"],
-    "LockingKeysString": "BLOCAT",
-    "UnlockingKeysString": "DEBLOCAT",
-    "WarningKeysLockedString": "!BLOCAT!",
-    "WarningThermalRunaway": ["Incalzire", "Esuata"]
-  },
-  "characters": {
-    "SettingRightChar": "D",
-    "SettingLeftChar": "S",
-    "SettingAutoChar": "A",
-    "SettingOffChar": "O",
-    "SettingSlowChar": "Î",
-    "SettingMediumChar": "M",
-    "SettingFastChar": "R",
-    "SettingStartNoneChar": "O",
-    "SettingStartSolderingChar": "S",
-    "SettingStartSleepChar": "Z",
-    "SettingStartSleepOffChar": "R",
-    "SettingSensitivityOff": "O",
-    "SettingSensitivityLow": "L",
-    "SettingSensitivityMedium": "M",
-    "SettingSensitivityHigh": "H",
-    "SettingLockDisableChar": "D",
-    "SettingLockBoostChar": "B",
-    "SettingLockFullChar": "F"
-  },
-  "menuGroups": {
-    "PowerMenu": {
-      "text2": ["Setări de", "alimentare"],
-      "desc": "Setări de alimentare"
-    },
-    "SolderingMenu": {
-      "text2": ["Setări de", "lipire"],
-      "desc": "Setări de lipire"
-    },
-    "PowerSavingMenu": {
-      "text2": ["Modul", "repaus"],
-      "desc": "Setări de economisire a energiei"
-    },
-    "UIMenu": {
-      "text2": ["Interfată", "utilizator"],
-      "desc": "Setări interfată utilizator"
-    },
-    "AdvancedMenu": {
-      "text2": ["Optiuni", "avansate"],
-      "desc": "Optiuni avansate"
-    }
-  },
-  "menuOptions": {
-    "DCInCutoff": {
-      "text2": ["Sursa de", "alimentare"],
-      "desc": "Sursa de alimentare. Setează tensiunea de întrerupere. (DC 10V) (S 3.3V per celulă, dezactivati limita de alimentare)"
-    },
-    "SleepTemperature": {
-      "text2": ["Temp", "repaus"],
-      "desc": "Temperatura vârfului în \"modul repaus\""
-    },
-    "SleepTimeout": {
-      "text2": ["Expirare", "repaus"],
-      "desc": "Interval înainte de lansarea \"modului de repaus\" în (s=secunde | m=minute)"
-    },
-    "ShutdownTimeout": {
-      "text2": ["Expirare", "oprire"],
-      "desc": "Interval înainte ca letconul să se oprească (m=minute)"
-    },
-    "MotionSensitivity": {
-      "text2": ["Sensibilitate", "la mişcare"],
-      "desc": "0=oprit | 1=putin sensibil | ... | 9=cel mai sensibil"
-    },
-    "TemperatureUnit": {
-      "text2": ["Unitate de", "temperatură"],
-      "desc": "C=Celsius | F=Fahrenheit"
-    },
-    "AdvancedIdle": {
-      "text2": ["Detalii,", "ecran inactiv"],
-      "desc": "Afisati informatii detaliate într-un font mai mic pe ecranul de repaus"
-    },
-    "DisplayRotation": {
-      "text2": ["Orientare", "ecran"],
-      "desc": "R=dreptaci | L=stângaci | A=auto"
-    },
-    "BoostTemperature": {
-      "text2": ["Boost", "temp"],
-      "desc": "Temperatura utilizată în \"modul boost\""
-    },
-    "AutoStart": {
-      "text2": ["Auto", "start"],
-      "desc": "Start letcon în modul de lipire la pornire (O=oprit | S=lipire | Z=repaus | R=repaus la temperatura camerei)"
-    },
-    "CooldownBlink": {
-      "text2": ["Clipeste", "la răcire"],
-      "desc": "Clipeste temperatura după oprirea încălzirii, în timp ce vârful este încă fierbinte"
-    },
-    "TemperatureCalibration": {
-      "text2": ["Calibrare", "temperatură?"],
-      "desc": "Începeti calibrarea compensării de temperatură a vârfului"
-    },
-    "SettingsReset": {
-      "text2": ["Setări", "din fabrică"],
-      "desc": "Reveniti la setările din fabrică"
-    },
-    "VoltageCalibration": {
-      "text2": ["Calibrare tens.", "de intrare?"],
-      "desc": "Porniti calibrarea VIN (apăsati lung pentru a iesi)"
-    },
-    "AdvancedSoldering": {
-      "text2": ["Detalii", "ecran lipire"],
-      "desc": "Afisati informatii detaliate într-un font mai mic pe ecranul de lipire"
-    },
-    "ScrollingSpeed": {
-      "text2": ["Viteză", "derulare"],
-      "desc": "Viteză derulare text cu informatii la (S=lent | F=rapid)"
-    },
-    "QCMaxVoltage": {
-      "text2": ["QC", "voltaj"],
-      "desc": "Tensiunea maximă QC dorită pentru care negociază letconul"
-    },
-    "PDNegTimeout": {
-      "text2": ["PD", "timeout"],
-      "desc": "Timp limita de negociere pentru tranzactia PD, in pasi de 100ms, pentru compatibilitate cu alimentatoarele QC"
-    },
-    "PowerLimit": {
-      "text2": ["Putere", "limită"],
-      "desc": "Puterea maximă pe care letconul o poate folosi (W=watt)"
-    },
-    "ReverseButtonTempChange": {
-      "text2": ["Inversare", "+ - butoane"],
-      "desc": "Inversarea butoanelor de reglare a temperaturii"
-    },
-    "TempChangeShortStep": {
-      "text2": ["Schimbare temp.", "apăsare scută"],
-      "desc": "Schimbarea temperaturii la apăsarea scurtă a butonului"
-    },
-    "TempChangeLongStep": {
-      "text2": ["Schimbare temp.", "apăsare lungă"],
-      "desc": "Schimbarea temperaturii la apăsarea lungă a butonului"
-    },
-    "PowerPulsePower": {
-      "text2": ["Putere", "puls"],
-      "desc": "Puterea pulsului de mentinere activa a blocului de alimentare (watt)"
-    },
-    "HallEffSensitivity": {
-      "text2": ["Sensibilitate", "senzor Hall"],
-      "desc": "Sensibilitate senzor cu efect Hall pentru a detecta repausul (0=oprit | 1=putin sensibil | ... | 9=cel mai sensibil)"
-    },
-    "LockingMode": {
-      "text2": ["Blocare", "butoane"],
-      "desc": "Când lipiti, apăsati lung ambele butoane, pentru a le bloca (D=dezactivare | B=numai \"modul boost\" | F=blocare completă)"
-    },
-    "MinVolCell": {
-      "text2": ["Voltaj", "minim"],
-      "desc": "Tensiunea minimă admisă pe celulă (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)"
-    },
-    "AnimLoop": {
-      "text2": ["Animatii", "buclă"],
-      "desc": "Animatii de pictograme în meniul principal"
-    },
-    "AnimSpeed": {
-      "text2": ["Animatii", "viteză"],
-      "desc": "Ritmul animatiilor pictogramei din meniu (O=oprit | Î=încet | M=mediu | R=rapid)"
-    },
-    "PowerPulseWait": {
-      "text2": ["Întârziere", "puls putere"],
-      "desc": "Perioada pulsului de mentinere (x 2.5s)"
-    },
-    "PowerPulseDuration": {
-      "text2": ["Durată", "puls putere"],
-      "desc": "Durata pulsului de mentinere (x 250ms)"
-    },
-    "LanguageSwitch": {
-      "text2": ["Limbă:", " RO     Română"],
-      "desc": "Limba curenta"
-    },
-    "Brightness": {
-      "text2": ["Ecranului", "luminozitatea"],
-      "desc": "Ajusteaza luminozitatea ecranului"
-    },
-    "ColourInversion": {
-      "text2": ["Inverseaza", "culoarea"],
-      "desc": "Inverseaza culoarea ecranului"
-    },
-    "LOGOTime": {
-      "text2": ["Boot logo", "duration"],
-      "desc": "Sets the duration for the boot logo (s=seconds)"
-    }
-  }
-}
+{
+    "languageCode": "RO",
+    "languageLocalName": "Română",
+    "tempUnitFahrenheit": true,
+    "messages": {
+        "SettingsCalibrationWarning": "Before rebooting, make sure tip & handle are at room temperature!",
+        "CJCCalibrating": "calibrating",
+        "SettingsResetWarning": "Sigur doriti să restaurati la setările implicite?",
+        "UVLOWarningString": "DC LOW",
+        "UndervoltageString": "Sub tensiune",
+        "InputVoltageString": "Intrare V: ",
+        "SleepingSimpleString": "Zzzz",
+        "SleepingAdvancedString": "Adormit...",
+        "SleepingTipAdvancedString": "Tip:",
+        "OffString": "Nu",
+        "DeviceFailedValidationWarning": "Your device is most likely a counterfeit!"
+    },
+    "messagesWarn": {
+        "CJCCalibrationDone": [
+            "Calibration",
+            "done!"
+        ],
+        "ResetOKMessage": "Reset OK",
+        "SettingsResetMessage": [
+            "Setările au fost",
+            "resetate!"
+        ],
+        "NoAccelerometerMessage": [
+            "Nu accelerometru",
+            "detectat!"
+        ],
+        "NoPowerDeliveryMessage": [
+            "Fără USB-PD IC",
+            "detectat!"
+        ],
+        "LockingKeysString": "BLOCAT",
+        "UnlockingKeysString": "DEBLOCAT",
+        "WarningKeysLockedString": "!BLOCAT!",
+        "WarningThermalRunaway": [
+            "Incalzire",
+            "Esuata"
+        ]
+    },
+    "characters": {
+        "SettingRightChar": "D",
+        "SettingLeftChar": "S",
+        "SettingAutoChar": "A",
+        "SettingOffChar": "O",
+        "SettingSlowChar": "Î",
+        "SettingMediumChar": "M",
+        "SettingFastChar": "R",
+        "SettingStartNoneChar": "O",
+        "SettingStartSolderingChar": "S",
+        "SettingStartSleepChar": "Z",
+        "SettingStartSleepOffChar": "R",
+        "SettingSensitivityOff": "O",
+        "SettingSensitivityLow": "L",
+        "SettingSensitivityMedium": "M",
+        "SettingSensitivityHigh": "H",
+        "SettingLockDisableChar": "D",
+        "SettingLockBoostChar": "B",
+        "SettingLockFullChar": "F"
+    },
+    "menuGroups": {
+        "PowerMenu": {
+            "text2": [
+                "Setări de",
+                "alimentare"
+            ],
+            "desc": ""
+        },
+        "SolderingMenu": {
+            "text2": [
+                "Setări de",
+                "lipire"
+            ],
+            "desc": ""
+        },
+        "PowerSavingMenu": {
+            "text2": [
+                "Modul",
+                "repaus"
+            ],
+            "desc": ""
+        },
+        "UIMenu": {
+            "text2": [
+                "Interfată",
+                "utilizator"
+            ],
+            "desc": ""
+        },
+        "AdvancedMenu": {
+            "text2": [
+                "Optiuni",
+                "avansate"
+            ],
+            "desc": ""
+        }
+    },
+    "menuOptions": {
+        "DCInCutoff": {
+            "text2": [
+                "Sursa de",
+                "alimentare"
+            ],
+            "desc": "Sursa de alimentare. Setează tensiunea de întrerupere. (DC 10V) (S 3.3V per celulă, dezactivati limita de alimentare)"
+        },
+        "MinVolCell": {
+            "text2": [
+                "Voltaj",
+                "minim"
+            ],
+            "desc": "Tensiunea minimă admisă pe celulă (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)"
+        },
+        "QCMaxVoltage": {
+            "text2": [
+                "QC",
+                "voltaj"
+            ],
+            "desc": "Tensiunea maximă QC dorită pentru care negociază letconul"
+        },
+        "PDNegTimeout": {
+            "text2": [
+                "PD",
+                "timeout"
+            ],
+            "desc": "Timp limita de negociere pentru tranzactia PD, in pasi de 100ms, pentru compatibilitate cu alimentatoarele QC"
+        },
+        "BoostTemperature": {
+            "text2": [
+                "Boost",
+                "temp"
+            ],
+            "desc": "Temperatura utilizată în \"modul boost\""
+        },
+        "AutoStart": {
+            "text2": [
+                "Auto",
+                "start"
+            ],
+            "desc": "Start letcon în modul de lipire la pornire (O=oprit | S=lipire | Z=repaus | R=repaus la temperatura camerei)"
+        },
+        "TempChangeShortStep": {
+            "text2": [
+                "Schimbare temp.",
+                "apăsare scută"
+            ],
+            "desc": "Schimbarea temperaturii la apăsarea scurtă a butonului"
+        },
+        "TempChangeLongStep": {
+            "text2": [
+                "Schimbare temp.",
+                "apăsare lungă"
+            ],
+            "desc": "Schimbarea temperaturii la apăsarea lungă a butonului"
+        },
+        "LockingMode": {
+            "text2": [
+                "Blocare",
+                "butoane"
+            ],
+            "desc": "Când lipiti, apăsati lung ambele butoane, pentru a le bloca (D=dezactivare | B=numai \"modul boost\" | F=blocare completă)"
+        },
+        "MotionSensitivity": {
+            "text2": [
+                "Sensibilitate",
+                "la miscare"
+            ],
+            "desc": "Sensibilitate senzor miscare (0=oprit | 1=putin sensibil | ... | 9=cel mai sensibil)"
+        },
+        "SleepTemperature": {
+            "text2": [
+                "Temp",
+                "repaus"
+            ],
+            "desc": "Temperatura vârfului în \"modul repaus\""
+        },
+        "SleepTimeout": {
+            "text2": [
+                "Expirare",
+                "repaus"
+            ],
+            "desc": "Interval înainte de lansarea \"modului de repaus\" în (s=secunde | m=minute)"
+        },
+        "ShutdownTimeout": {
+            "text2": [
+                "Expirare",
+                "oprire"
+            ],
+            "desc": "Interval înainte ca letconul să se oprească (m=minute)"
+        },
+        "HallEffSensitivity": {
+            "text2": [
+                "Sensibilitate",
+                "senzor Hall"
+            ],
+            "desc": "Sensibilitate senzor cu efect Hall pentru a detecta repausul (0=oprit | 1=putin sensibil | ... | 9=cel mai sensibil)"
+        },
+        "TemperatureUnit": {
+            "text2": [
+                "Unitate de",
+                "temperatură"
+            ],
+            "desc": "C=Celsius | F=Fahrenheit"
+        },
+        "DisplayRotation": {
+            "text2": [
+                "Orientare",
+                "ecran"
+            ],
+            "desc": "R=dreptaci | L=stângaci | A=auto"
+        },
+        "CooldownBlink": {
+            "text2": [
+                "Clipeste",
+                "la răcire"
+            ],
+            "desc": "Clipeste temperatura după oprirea încălzirii, în timp ce vârful este încă fierbinte"
+        },
+        "ScrollingSpeed": {
+            "text2": [
+                "Viteză",
+                "derulare"
+            ],
+            "desc": "Viteză derulare text cu informatii la (S=lent | F=rapid)"
+        },
+        "ReverseButtonTempChange": {
+            "text2": [
+                "Inversare",
+                "+ - butoane"
+            ],
+            "desc": "Inversarea butoanelor de reglare a temperaturii"
+        },
+        "AnimSpeed": {
+            "text2": [
+                "Animatii",
+                "viteză"
+            ],
+            "desc": "Ritmul animatiilor pictogramei din meniu (O=oprit | Î=încet | M=mediu | R=rapid)"
+        },
+        "AnimLoop": {
+            "text2": [
+                "Animatii",
+                "buclă"
+            ],
+            "desc": "Animatii de pictograme în meniul principal"
+        },
+        "Brightness": {
+            "text2": [
+                "Ecranului",
+                "luminozitatea"
+            ],
+            "desc": "Ajusteaza luminozitatea ecranului"
+        },
+        "ColourInversion": {
+            "text2": [
+                "Inverseaza",
+                "culoarea"
+            ],
+            "desc": "Inverseaza culoarea ecranului"
+        },
+        "LOGOTime": {
+            "text2": [
+                "Durată",
+                "logo încărcare"
+            ],
+            "desc": "Setati durata logo de pornire (s=secunde)"
+        },
+        "AdvancedIdle": {
+            "text2": [
+                "Detalii,",
+                "ecran inactiv"
+            ],
+            "desc": "Afisati informatii detaliate într-un font mai mic pe ecranul de repaus"
+        },
+        "AdvancedSoldering": {
+            "text2": [
+                "Detalii",
+                "ecran lipire"
+            ],
+            "desc": "Afisati informatii detaliate într-un font mai mic pe ecranul de lipire"
+        },
+        "PowerLimit": {
+            "text2": [
+                "Putere",
+                "limită"
+            ],
+            "desc": "Puterea maximă pe care letconul o poate folosi (W=watt)"
+        },
+        "CalibrateCJC": {
+            "text2": [
+                "Calibrare CJC",
+                "la următoarea pornire"
+            ],
+            "desc": "At next boot tip Cold Junction Compensation will be calibrated (not required if Delta T is < 5°C)"
+        },
+        "VoltageCalibration": {
+            "text2": [
+                "Calibrare tens.",
+                "de intrare?"
+            ],
+            "desc": "Porniti calibrarea VIN (apăsati lung pentru a iesi)"
+        },
+        "PowerPulsePower": {
+            "text2": [
+                "Putere",
+                "puls"
+            ],
+            "desc": "Puterea pulsului de mentinere activa a blocului de alimentare (watt)"
+        },
+        "PowerPulseWait": {
+            "text2": [
+                "Întârziere",
+                "puls putere"
+            ],
+            "desc": "Perioada pulsului de mentinere (x 2.5s)"
+        },
+        "PowerPulseDuration": {
+            "text2": [
+                "Durată",
+                "puls putere"
+            ],
+            "desc": "Durata pulsului de mentinere (x 250ms)"
+        },
+        "SettingsReset": {
+            "text2": [
+                "Setări",
+                "din fabrică"
+            ],
+            "desc": "Reveniti la setările din fabrică"
+        },
+        "LanguageSwitch": {
+            "text2": [
+                "Limbă:",
+                " RO      Română"
+            ],
+            "desc": ""
+        }
+    }
+}

Translations/translation_RU.json

@@ -1,207 +1,341 @@
-{
-  "languageCode": "RU",
-  "languageLocalName": "Русский",
-  "fonts": ["ascii_basic", "latin_extended", "cyrillic"],
-  "tempUnitFahrenheit": false,
-  "messages": {
-    "SettingsCalibrationWarning": "Прежде чем продолжить, пожалуйста, убедитесь, что жало имеет комнатную температуру!",
-    "SettingsResetWarning": "Вы уверены, что хотите сбросить настройки к значениям по умолчанию?",
-    "UVLOWarningString": "НАПРЯЖ--",
-    "UndervoltageString": "Низ. напряжение",
-    "InputVoltageString": "Питание В: ",
-    "SleepingSimpleString": "Zzzz",
-    "SleepingAdvancedString": "Ожидание...",
-    "SleepingTipAdvancedString": "Жало:",
-    "OffString": "Вык"
-  },
-  "messagesWarn": {
-    "ResetOKMessage": "Сброс OK",
-    "SettingsResetMessage": ["Настройки", "сброшены!"],
-    "NoAccelerometerMessage": ["Не определен", "акселерометр!"],
-    "NoPowerDeliveryMessage": ["USB-PD питание", "не обнаружено"],
-    "LockingKeysString": "ЗАБЛОК",
-    "UnlockingKeysString": "РАЗБЛОК",
-    "WarningKeysLockedString": "!ЗАБЛОК!",
-    "WarningThermalRunaway": ["Thermal", "Runaway"]
-  },
-  "characters": {
-    "SettingRightChar": "П",
-    "SettingLeftChar": "Л",
-    "SettingAutoChar": "А",
-    "SettingOffChar": "О",
-    "SettingSlowChar": "М",
-    "SettingMediumChar": "С",
-    "SettingFastChar": "Б",
-    "SettingStartNoneChar": "В",
-    "SettingStartSolderingChar": "П",
-    "SettingStartSleepChar": "О",
-    "SettingStartSleepOffChar": "К",
-    "SettingSensitivityOff": "О",
-    "SettingSensitivityLow": "Н",
-    "SettingSensitivityMedium": "С",
-    "SettingSensitivityHigh": "В",
-    "SettingLockDisableChar": "О",
-    "SettingLockBoostChar": "Т",
-    "SettingLockFullChar": "П"
-  },
-  "menuGroups": {
-    "PowerMenu": {
-      "text2": ["Параметры", "питания"],
-      "desc": "Источник питания и минимальное напряжение на ячейку"
-    },
-    "SolderingMenu": {
-      "text2": ["Параметры", "пайки"],
-      "desc": "Параметры пайки"
-    },
-    "PowerSavingMenu": {
-      "text2": ["Режимы", "сна"],
-      "desc": "Настройки режима ожидания"
-    },
-    "UIMenu": {
-      "text2": ["Параметры", "интерфейса"],
-      "desc": "Настройки пользовательского интерфейса"
-    },
-    "AdvancedMenu": {
-      "text2": ["Дополнител.", "настройки"],
-      "desc": "Дополнительные настройки"
-    }
-  },
-  "menuOptions": {
-    "DCInCutoff": {
-      "text2": ["Источник", "питания"],
-      "desc": "Источник питания. Устанавливает напряжение отсечки. (DC 10В) (S 3,3В на ячейку, без лимита мощности)"
-    },
-    "SleepTemperature": {
-      "text2": ["Темп.", "ожидания"],
-      "desc": "Температура режима ожидания"
-    },
-    "SleepTimeout": {
-      "text2": ["Таймаут", "ожидания"],
-      "desc": "Время до перехода в режим ожидания (Минуты | Секунды)"
-    },
-    "ShutdownTimeout": {
-      "text2": ["Таймаут", "выключения"],
-      "desc": "Время до отключения паяльника (Минуты)"
-    },
-    "MotionSensitivity": {
-      "text2": ["Чувствительн.", "акселерометра"],
-      "desc": "Чувствительность акселерометра (0=Выкл. | 1=Мин. | ... | 9=Макс.)"
-    },
-    "TemperatureUnit": {
-      "text2": ["Единицы", "температуры"],
-      "desc": "Единицы измерения температуры (C=Цельcия | F=Фаренгейта)"
-    },
-    "AdvancedIdle": {
-      "text2": ["Подробный", "реж. ожидания"],
-      "desc": "Отображать детальную информацию уменьшенным шрифтом на экране ожидания"
-    },
-    "DisplayRotation": {
-      "text2": ["Ориентация", "экрана"],
-      "desc": "Ориентация экрана (П=Правая рука | Л=Левая рука | А=Авто)"
-    },
-    "BoostTemperature": {
-      "text2": ["t° турбо", "режима"],
-      "desc": "Температура жала в турбо-режиме"
-    },
-    "AutoStart": {
-      "text2": ["Авто", "старт"],
-      "desc": "Режим, в котором запускается паяльник при подаче питания (В=Выкл. | П=Пайка | О=Ожидание | К=Ожидание при комн. темп.)"
-    },
-    "CooldownBlink": {
-      "text2": ["Мигание t°", "при остывании"],
-      "desc": "Мигать температурой на экране охлаждения, пока жало еще горячее"
-    },
-    "TemperatureCalibration": {
-      "text2": ["Калибровка", "температуры"],
-      "desc": "Калибровка термодатчика жала"
-    },
-    "SettingsReset": {
-      "text2": ["Сброс", "Настроек"],
-      "desc": "Сброс настроек к значеням по умолчанию"
-    },
-    "VoltageCalibration": {
-      "text2": ["Калибровка", "напряжения"],
-      "desc": "Калибровка входного напряжения (долгое нажатие для выхода)"
-    },
-    "AdvancedSoldering": {
-      "text2": ["Подробный", "экран пайки"],
-      "desc": "Показывать детальную информацию на экране пайки"
-    },
-    "ScrollingSpeed": {
-      "text2": ["Скорость", "текста"],
-      "desc": "Скорость прокрутки текста (М=медленно | Б=быстро)"
-    },
-    "QCMaxVoltage": {
-      "text2": ["Максимальный", "вольтаж для QC"],
-      "desc": "Максимальный поддерживаемый QC вольтаж используемого источника питания"
-    },
-    "PDNegTimeout": {
-      "text2": ["PD", "тайм-аут"],
-      "desc": "Power Delivery тайм-аут согласования с шагом 100 мс для совместимости с некоторыми быстрыми зарядными QC (0: отключено)"
-    },
-    "PowerLimit": {
-      "text2": ["Предел", "мощности"],
-      "desc": "Максимальная мощность, которую может использовать паяльник (Ватт)"
-    },
-    "ReverseButtonTempChange": {
-      "text2": ["Инвертировать", "кнопки"],
-      "desc": "Инвертировать кнопки изменения температуры"
-    },
-    "TempChangeShortStep": {
-      "text2": ["Шаг темп.", "кор. наж."],
-      "desc": "Шаг изменения температуры при коротком нажатии кнопок"
-    },
-    "TempChangeLongStep": {
-      "text2": ["Шаг темп.", "длин. наж."],
-      "desc": "Шаг изменения температуры при длинном нажатии кнопок"
-    },
-    "PowerPulsePower": {
-      "text2": ["Сила имп.", "питания Вт"],
-      "desc": "Сила импульса удерживающего от сна повербанк или другой источник питания"
-    },
-    "HallEffSensitivity": {
-      "text2": ["Датчик", "Холла"],
-      "desc": "Уровень чувствительности датчика холла в режиме сна (0=Выкл. | 1=Мин. | ... | 9=Макс.)"
-    },
-    "LockingMode": {
-      "text2": ["Разрешить", "блок. кнопок"],
-      "desc": "При работе длинное нажатие обеих кнопок блокирует их (О=Отключено | Т=Только турбо | П=Полная блокировка)"
-    },
-    "MinVolCell": {
-      "text2": ["Мин.", "напр."],
-      "desc": "Минимальное разрешенное напряжение на ячейку (3S: 3 - 3,7V | 4S-6S: 2,4 - 3,7V)"
-    },
-    "AnimLoop": {
-      "text2": ["Зацикленная", "анимация"],
-      "desc": "Зацикленная анимация иконок в главном меню"
-    },
-    "AnimSpeed": {
-      "text2": ["Скорость", "анимации"],
-      "desc": "Скорость анимации иконок в главном меню (Милисекунды) (О=Отключено | Н=Низкий | С=Средний | В=Высокий)"
-    },
-    "PowerPulseWait": {
-      "text2": ["Пауза имп.", "питания с"],
-      "desc": "Пауза между импульсами удерживающими источник питания от сна (x 2,5с)"
-    },
-    "PowerPulseDuration": {
-      "text2": ["Длина имп.", "питания мс"],
-      "desc": "Длина импульса удерживающего от сна источник питания (x 250мс)"
-    },
-    "LanguageSwitch": {
-      "text2": ["Язык:", " RU     Русский"],
-      "desc": "Язык прошивки"
-    },
-    "Brightness": {
-      "text2": ["Яркость", "экрана"],
-      "desc": "Настройки контраста/яркости OLED экрана"
-    },
-    "ColourInversion": {
-      "text2": ["Инверт", "экрана"],
-      "desc": "Инвертировать цвета на OLED экране"
-    },
-    "LOGOTime": {
-      "text2": ["Boot logo", "duration"],
-      "desc": "Sets the duration for the boot logo (s=seconds)"
-    }
-  }
-}
+{
+    "languageCode": "RU",
+    "languageLocalName": "Русский",
+    "tempUnitFahrenheit": false,
+    "messages": {
+        "SettingsCalibrationWarning": "Пожалуйста, убедитесь, что жало и корпус имеют комнатную температуру при следующей загрузке!",
+        "CJCCalibrating": "калибровка",
+        "SettingsResetWarning": "Вы уверены, что хотите сбросить настройки к значениям по умолчанию?",
+        "UVLOWarningString": "НАПРЯЖ--",
+        "UndervoltageString": "Низ. напряжение",
+        "InputVoltageString": "Питание В: ",
+        "SleepingSimpleString": "Zzzz",
+        "SleepingAdvancedString": "Ожидание...",
+        "SleepingTipAdvancedString": "Жало:",
+        "OffString": "Вык",
+        "DeviceFailedValidationWarning": "Скорее всего, это устройство подделка!"
+    },
+    "messagesWarn": {
+        "CJCCalibrationDone": [
+            "Calibration",
+            "done!"
+        ],
+        "ResetOKMessage": "Сброс OK",
+        "SettingsResetMessage": [
+            "Настройки",
+            "сброшены!"
+        ],
+        "NoAccelerometerMessage": [
+            "Не определен",
+            "акселерометр!"
+        ],
+        "NoPowerDeliveryMessage": [
+            "USB-PD питание",
+            "не обнаружено"
+        ],
+        "LockingKeysString": "ЗАБЛОК",
+        "UnlockingKeysString": "РАЗБЛОК",
+        "WarningKeysLockedString": "!ЗАБЛОК!",
+        "WarningThermalRunaway": [
+            "Thermal",
+            "Runaway"
+        ]
+    },
+    "characters": {
+        "SettingRightChar": "П",
+        "SettingLeftChar": "Л",
+        "SettingAutoChar": "А",
+        "SettingOffChar": "О",
+        "SettingSlowChar": "М",
+        "SettingMediumChar": "С",
+        "SettingFastChar": "Б",
+        "SettingStartNoneChar": "В",
+        "SettingStartSolderingChar": "П",
+        "SettingStartSleepChar": "О",
+        "SettingStartSleepOffChar": "К",
+        "SettingSensitivityOff": "О",
+        "SettingSensitivityLow": "Н",
+        "SettingSensitivityMedium": "С",
+        "SettingSensitivityHigh": "В",
+        "SettingLockDisableChar": "О",
+        "SettingLockBoostChar": "Т",
+        "SettingLockFullChar": "П"
+    },
+    "menuGroups": {
+        "PowerMenu": {
+            "text2": [
+                "Параметры",
+                "питания"
+            ],
+            "desc": ""
+        },
+        "SolderingMenu": {
+            "text2": [
+                "Параметры",
+                "пайки"
+            ],
+            "desc": ""
+        },
+        "PowerSavingMenu": {
+            "text2": [
+                "Режимы",
+                "сна"
+            ],
+            "desc": ""
+        },
+        "UIMenu": {
+            "text2": [
+                "Параметры",
+                "интерфейса"
+            ],
+            "desc": ""
+        },
+        "AdvancedMenu": {
+            "text2": [
+                "Дополнител.",
+                "настройки"
+            ],
+            "desc": ""
+        }
+    },
+    "menuOptions": {
+        "DCInCutoff": {
+            "text2": [
+                "Источник",
+                "питания"
+            ],
+            "desc": "Источник питания. Устанавливает напряжение отсечки. (DC 10В) (S 3,3В на ячейку, без лимита мощности)"
+        },
+        "MinVolCell": {
+            "text2": [
+                "Мин.",
+                "напр."
+            ],
+            "desc": "Минимальное разрешенное напряжение на ячейку (3S: 3 - 3,7V | 4S-6S: 2,4 - 3,7V)"
+        },
+        "QCMaxVoltage": {
+            "text2": [
+                "Ограничение",
+                "напряжения QC"
+            ],
+            "desc": "Максимальное напряжение для согласования с QC источником питания"
+        },
+        "PDNegTimeout": {
+            "text2": [
+                "PD",
+                "тайм-аут"
+            ],
+            "desc": "Power Delivery тайм-аут согласования с шагом 100 мс для совместимости с некоторыми быстрыми зарядными QC (0: отключено)"
+        },
+        "BoostTemperature": {
+            "text2": [
+                "t° турбо",
+                "режима"
+            ],
+            "desc": "Температура жала в турбо-режиме"
+        },
+        "AutoStart": {
+            "text2": [
+                "Авто",
+                "старт"
+            ],
+            "desc": "Режим, в котором запускается паяльник при подаче питания (В=Выкл. | П=Пайка | О=Ожидание | К=Ожидание при комн. темп.)"
+        },
+        "TempChangeShortStep": {
+            "text2": [
+                "Шаг темп.",
+                "кор. наж."
+            ],
+            "desc": "Шаг изменения температуры при коротком нажатии кнопок"
+        },
+        "TempChangeLongStep": {
+            "text2": [
+                "Шаг темп.",
+                "длин. наж."
+            ],
+            "desc": "Шаг изменения температуры при длинном нажатии кнопок"
+        },
+        "LockingMode": {
+            "text2": [
+                "Разрешить",
+                "блок. кнопок"
+            ],
+            "desc": "При работе длинное нажатие обеих кнопок блокирует их (О=Отключено | Т=Только турбо | П=Полная блокировка)"
+        },
+        "MotionSensitivity": {
+            "text2": [
+                "Чувствительн.",
+                "акселерометра"
+            ],
+            "desc": "Чувствительность акселерометра (0=Выкл. | 1=Мин. | ... | 9=Макс.)"
+        },
+        "SleepTemperature": {
+            "text2": [
+                "Темп.",
+                "ожидания"
+            ],
+            "desc": "Температура режима ожидания"
+        },
+        "SleepTimeout": {
+            "text2": [
+                "Таймаут",
+                "ожидания"
+            ],
+            "desc": "Время до перехода в режим ожидания (Минуты | Секунды)"
+        },
+        "ShutdownTimeout": {
+            "text2": [
+                "Таймаут",
+                "выключения"
+            ],
+            "desc": "Время до отключения паяльника (Минуты)"
+        },
+        "HallEffSensitivity": {
+            "text2": [
+                "Датчик",
+                "Холла"
+            ],
+            "desc": "Чувствительность датчика Холла к переходу в спящий режим (0=Выкл. | 1=Мин. | ... | 9=Макс.)"
+        },
+        "TemperatureUnit": {
+            "text2": [
+                "Единицы",
+                "температуры"
+            ],
+            "desc": "Единицы измерения температуры (C=Цельcия | F=Фаренгейта)"
+        },
+        "DisplayRotation": {
+            "text2": [
+                "Ориентация",
+                "экрана"
+            ],
+            "desc": "Ориентация экрана (П=Правая рука | Л=Левая рука | А=Авто)"
+        },
+        "CooldownBlink": {
+            "text2": [
+                "Мигание t°",
+                "при остывании"
+            ],
+            "desc": "Мигать температурой на экране охлаждения, пока жало еще горячее"
+        },
+        "ScrollingSpeed": {
+            "text2": [
+                "Скорость",
+                "текста"
+            ],
+            "desc": "Скорость прокрутки текста (М=медленно | Б=быстро)"
+        },
+        "ReverseButtonTempChange": {
+            "text2": [
+                "Инвертировать",
+                "кнопки"
+            ],
+            "desc": "Инвертировать кнопки изменения температуры"
+        },
+        "AnimSpeed": {
+            "text2": [
+                "Скорость",
+                "анимации"
+            ],
+            "desc": "Скорость анимации иконок в главном меню (Милисекунды) (О=Отключено | Н=Низкий | С=Средний | В=Высокий)"
+        },
+        "AnimLoop": {
+            "text2": [
+                "Зацикленная",
+                "анимация"
+            ],
+            "desc": "Зацикленная анимация иконок в главном меню"
+        },
+        "Brightness": {
+            "text2": [
+                "Яркость",
+                "экрана"
+            ],
+            "desc": "Настройки контраста/яркости OLED экрана"
+        },
+        "ColourInversion": {
+            "text2": [
+                "Инверсия",
+                "экрана"
+            ],
+            "desc": "Инвертировать цвета на OLED экране"
+        },
+        "LOGOTime": {
+            "text2": [
+                "Длительность",
+                "показа логотипа"
+            ],
+            "desc": "Длительность отображения логотипа (в секундах)"
+        },
+        "AdvancedIdle": {
+            "text2": [
+                "Подробный",
+                "реж. ожидания"
+            ],
+            "desc": "Отображать детальную информацию уменьшенным шрифтом на экране ожидания"
+        },
+        "AdvancedSoldering": {
+            "text2": [
+                "Подробный",
+                "экран пайки"
+            ],
+            "desc": "Показывать детальную информацию на экране пайки"
+        },
+        "PowerLimit": {
+            "text2": [
+                "Предел",
+                "мощности"
+            ],
+            "desc": "Максимальная мощность, которую может использовать паяльник (Ватт)"
+        },
+        "CalibrateCJC": {
+            "text2": [
+                "Калибровка",
+                "температуры"
+            ],
+            "desc": "At next boot tip Cold Junction Compensation will be calibrated (not required if Delta T is < 5°C)"
+        },
+        "VoltageCalibration": {
+            "text2": [
+                "Калибровка",
+                "напряжения"
+            ],
+            "desc": "Калибровка входного напряжения (долгое нажатие для выхода)"
+        },
+        "PowerPulsePower": {
+            "text2": [
+                "Сила имп.",
+                "питания Вт"
+            ],
+            "desc": "Сила импульса удерживающего от сна повербанк или другой источник питания"
+        },
+        "PowerPulseWait": {
+            "text2": [
+                "Пауза имп.",
+                "питания с"
+            ],
+            "desc": "Пауза между импульсами удерживающими источник питания от сна (x 2,5с)"
+        },
+        "PowerPulseDuration": {
+            "text2": [
+                "Длина имп.",
+                "питания мс"
+            ],
+            "desc": "Длина импульса удерживающего от сна источник питания (x 250мс)"
+        },
+        "SettingsReset": {
+            "text2": [
+                "Сброс",
+                "Настроек"
+            ],
+            "desc": "Сброс настроек к значеням по умолчанию"
+        },
+        "LanguageSwitch": {
+            "text2": [
+                "Язык:",
+                " RU     Русский"
+            ],
+            "desc": ""
+        }
+    }
+}

Translations/translation_SK.json

@@ -1,207 +1,341 @@
-{
-  "languageCode": "SK",
-  "languageLocalName": "Slovenčina",
-  "fonts": ["ascii_basic", "latin_extended"],
-  "tempUnitFahrenheit": false,
-  "messages": {
-    "SettingsCalibrationWarning": "Najprv sa prosím uistite, že hrot má izbovú teplotu!",
-    "SettingsResetWarning": "Naozaj chcete obnoviť továrenské nastavenia?",
-    "UVLOWarningString": "Nízke U!",
-    "UndervoltageString": "Nízke napätie",
-    "InputVoltageString": "Vstupné U: ",
-    "SleepingSimpleString": "Chrr",
-    "SleepingAdvancedString": "Pokojový režim..",
-    "SleepingTipAdvancedString": "Hrot:",
-    "OffString": "Vyp"
-  },
-  "messagesWarn": {
-    "ResetOKMessage": "Reset OK",
-    "SettingsResetMessage": ["Nastavenia", "resetované"],
-    "NoAccelerometerMessage": ["Bez pohybového", "senzora!"],
-    "NoPowerDeliveryMessage": ["Chýba čip", "USB-PD!"],
-    "LockingKeysString": "ZABLOK.",
-    "UnlockingKeysString": "ODBLOK.",
-    "WarningKeysLockedString": "!ZABLOK!",
-    "WarningThermalRunaway": ["Únik", "Tepla"]
-  },
-  "characters": {
-    "SettingRightChar": "P",
-    "SettingLeftChar": "L",
-    "SettingAutoChar": "A",
-    "SettingOffChar": "Z",
-    "SettingSlowChar": "P",
-    "SettingMediumChar": "S",
-    "SettingFastChar": "R",
-    "SettingStartNoneChar": "V",
-    "SettingStartSolderingChar": "Z",
-    "SettingStartSleepChar": "S",
-    "SettingStartSleepOffChar": "I",
-    "SettingSensitivityOff": "Z",
-    "SettingSensitivityLow": "N",
-    "SettingSensitivityMedium": "S",
-    "SettingSensitivityHigh": "V",
-    "SettingLockDisableChar": "Z",
-    "SettingLockBoostChar": "B",
-    "SettingLockFullChar": "P"
-  },
-  "menuGroups": {
-    "PowerMenu": {
-      "text2": ["Nastavenie", "výkonu"],
-      "desc": "Nastavenie výkonu"
-    },
-    "SolderingMenu": {
-      "text2": ["Nastavenie", "spájkovania"],
-      "desc": "Nastavenie spájkovania"
-    },
-    "PowerSavingMenu": {
-      "text2": ["Úsporný", "režim"],
-      "desc": "Nastavenia režimov úspory energie"
-    },
-    "UIMenu": {
-      "text2": ["Nastavenie", "zobrazenia"],
-      "desc": "Nastavenie zobrazenia"
-    },
-    "AdvancedMenu": {
-      "text2": ["Pokročilé", "nastavenia"],
-      "desc": "Pokročilé nastavenia"
-    }
-  },
-  "menuOptions": {
-    "DCInCutoff": {
-      "text2": ["Zdroj", "napätia"],
-      "desc": "Zdroj napätia. Nastavenie napätia pre vypnutie (cutoff)  (DC=10V | nS=n*3.3V pre LiIon články)"
-    },
-    "SleepTemperature": {
-      "text2": ["Pokojová", "teplota"],
-      "desc": "Pokojová teplota (v nastavených jednotkách)"
-    },
-    "SleepTimeout": {
-      "text2": ["Pokojový", "režim po"],
-      "desc": "Pokojový režim po (s=sekundách | m=minútach)"
-    },
-    "ShutdownTimeout": {
-      "text2": ["Vypnutie", "po"],
-      "desc": "Čas na vypnutie (minúty)"
-    },
-    "MotionSensitivity": {
-      "text2": ["Citlivosť", "pohybu"],
-      "desc": "Citlivosť detekcie pohybu (0=Vyp | 1=Min | ... | 9=Max)"
-    },
-    "TemperatureUnit": {
-      "text2": ["Jednotka", "teploty"],
-      "desc": "Jednotky merania teploty (C=stupne Celzia | F=stupne Fahrenheita)"
-    },
-    "AdvancedIdle": {
-      "text2": ["Detaily v", "pokoj. režime"],
-      "desc": "Zobraziť detailné informácie v pokojovom režime (T=Zap | F=Vyp)"
-    },
-    "DisplayRotation": {
-      "text2": ["Orientácia", "displeja"],
-      "desc": "Orientácia displeja (P=Pravák | L=Ľavák | A=Auto)"
-    },
-    "BoostTemperature": {
-      "text2": ["Boost", "teplota"],
-      "desc": "Cieľová teplota pre prudký náhrev (v nastavených jednotkách)"
-    },
-    "AutoStart": {
-      "text2": ["Automatické", "spustenie"],
-      "desc": "Pri štarte spustiť režim spájkovania (V=Vyp | Z=Spájkovanie | S=Spanok | I=Spanok izbová teplota)"
-    },
-    "CooldownBlink": {
-      "text2": ["Blikanie pri", "chladnutí"],
-      "desc": "Blikanie ukazovateľa teploty počas chladnutia hrotu"
-    },
-    "TemperatureCalibration": {
-      "text2": ["Kalibrácia", "teploty"],
-      "desc": "Kalibrácia posunu teploty hrotu"
-    },
-    "SettingsReset": {
-      "text2": ["Obnovenie", "nastavení"],
-      "desc": "Obnovenie nastavení na pôvodné hodnoty"
-    },
-    "VoltageCalibration": {
-      "text2": ["Kalibrácia", "nap. napätia"],
-      "desc": "Kalibrácia napájacieho napätia. Krátke stlačenie mení nastavenie, dlhé stlačenie pre návrat"
-    },
-    "AdvancedSoldering": {
-      "text2": ["Detaily počas", "spájkovania"],
-      "desc": "Zobrazenie detailov počas spájkovania"
-    },
-    "ScrollingSpeed": {
-      "text2": ["Rýchlosť", "skrolovania"],
-      "desc": "Rýchlosť pohybu tohto textu"
-    },
-    "QCMaxVoltage": {
-      "text2": ["Obmedzenie QC", "napätia"],
-      "desc": "Maximálne QC napätie ktoré si má systém vyžiadať"
-    },
-    "PDNegTimeout": {
-      "text2": ["Čas vypršania", "Power Delivery"],
-      "desc": "Čas vyjednávania Power Delivery v 100ms krokoch pre kompatibilitu s niektorými QC nabíjačkami (0: vypnuté)"
-    },
-    "PowerLimit": {
-      "text2": ["Obmedzenie", "výkonu"],
-      "desc": "Obmedzenie výkonu podľa použitého zdroja (watt)"
-    },
-    "ReverseButtonTempChange": {
-      "text2": ["Otočenie", "tlačidiel +/-"],
-      "desc": "Prehodenie tlačidiel na nastavovanie teploty"
-    },
-    "TempChangeShortStep": {
-      "text2": ["Malý krok", "teploty"],
-      "desc": "Zmena teploty pri krátkom stlačení tlačidla"
-    },
-    "TempChangeLongStep": {
-      "text2": ["Veľký krok", "teploty"],
-      "desc": "Zmena teploty pri držaní tlačidla"
-    },
-    "PowerPulsePower": {
-      "text2": ["Intenzita", "impulzu"],
-      "desc": "Impulz udržujúci napájací zdroj zapnutý (power banky) (watt)"
-    },
-    "HallEffSensitivity": {
-      "text2": ["Citliv.", "Hall"],
-      "desc": "Citlivosť Hallovho senzora pre detekciu spánku (0=Vyp | 1=Min | ... | 9=Max)"
-    },
-    "LockingMode": {
-      "text2": ["Povoliť zámok", "tlačidiel"],
-      "desc": "Zamknutie tlačidiel - dlhé stlačenie oboch naraz počas spájkovania (Z=Zakázať | B=Okrem boost | P=Plné zamknutie)"
-    },
-    "MinVolCell": {
-      "text2": ["Minimálne", "napätie"],
-      "desc": "Minimálne napätie povolené na jeden článok (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)"
-    },
-    "AnimLoop": {
-      "text2": ["Opakovanie", "animácií"],
-      "desc": "Opakovanie animácií ikoniek v hlavnom menu"
-    },
-    "AnimSpeed": {
-      "text2": ["Rýchlosť", "animácií"],
-      "desc": "Rýchlosť animácií ikoniek v menu (O=off | P=pomaly | S=stredne | R=rýchlo)"
-    },
-    "PowerPulseWait": {
-      "text2": ["Interval", "impulzu"],
-      "desc": "Interval medzi impulzami udržujúcimi napájací zdroj zapnutý (x 2.5s)"
-    },
-    "PowerPulseDuration": {
-      "text2": ["Dĺžka impulzu", ""],
-      "desc": "Dĺžka impulzu udržujúci napájací zdroj zapnutý (x 250ms)"
-    },
-    "LanguageSwitch": {
-      "text2": ["Jazyk:", " SK  Slovenčina"],
-      "desc": "Aktuálny jazyk"
-    },
-    "Brightness": {
-      "text2": ["Jas", "obrazovky"],
-      "desc": "Mení jas/kontrast OLED displeja"
-    },
-    "ColourInversion": {
-      "text2": ["Invertovať", "obrazovku"],
-      "desc": "Invertovať farby OLED displeja"
-    },
-    "LOGOTime": {
-      "text2": ["Boot logo", "duration"],
-      "desc": "Sets the duration for the boot logo (s=seconds)"
-    }
-  }
-}
+{
+    "languageCode": "SK",
+    "languageLocalName": "Slovenčina",
+    "tempUnitFahrenheit": false,
+    "messages": {
+        "SettingsCalibrationWarning": "Before rebooting, make sure tip & handle are at room temperature!",
+        "CJCCalibrating": "calibrating",
+        "SettingsResetWarning": "Naozaj chcete obnoviť továrenské nastavenia?",
+        "UVLOWarningString": "Nízke U!",
+        "UndervoltageString": "Nízke napätie",
+        "InputVoltageString": "Vstupné U: ",
+        "SleepingSimpleString": "Chrr",
+        "SleepingAdvancedString": "Pokojový režim.",
+        "SleepingTipAdvancedString": "Hrot:",
+        "OffString": "Vyp",
+        "DeviceFailedValidationWarning": "Vaše zariadenie je pravdepodobne falzifikát!"
+    },
+    "messagesWarn": {
+        "CJCCalibrationDone": [
+            "Calibration",
+            "done!"
+        ],
+        "ResetOKMessage": "Reset OK",
+        "SettingsResetMessage": [
+            "Nastavenia",
+            "resetované"
+        ],
+        "NoAccelerometerMessage": [
+            "Bez pohybového",
+            "senzora!"
+        ],
+        "NoPowerDeliveryMessage": [
+            "Chýba čip",
+            "USB-PD!"
+        ],
+        "LockingKeysString": "ZABLOK.",
+        "UnlockingKeysString": "ODBLOK.",
+        "WarningKeysLockedString": "!ZABLOK!",
+        "WarningThermalRunaway": [
+            "Únik",
+            "Tepla"
+        ]
+    },
+    "characters": {
+        "SettingRightChar": "P",
+        "SettingLeftChar": "L",
+        "SettingAutoChar": "A",
+        "SettingOffChar": "Z",
+        "SettingSlowChar": "P",
+        "SettingMediumChar": "S",
+        "SettingFastChar": "R",
+        "SettingStartNoneChar": "V",
+        "SettingStartSolderingChar": "Z",
+        "SettingStartSleepChar": "S",
+        "SettingStartSleepOffChar": "I",
+        "SettingSensitivityOff": "Z",
+        "SettingSensitivityLow": "N",
+        "SettingSensitivityMedium": "S",
+        "SettingSensitivityHigh": "V",
+        "SettingLockDisableChar": "Z",
+        "SettingLockBoostChar": "B",
+        "SettingLockFullChar": "P"
+    },
+    "menuGroups": {
+        "PowerMenu": {
+            "text2": [
+                "Nastavenie",
+                "výkonu"
+            ],
+            "desc": ""
+        },
+        "SolderingMenu": {
+            "text2": [
+                "Nastavenie",
+                "spájkovania"
+            ],
+            "desc": ""
+        },
+        "PowerSavingMenu": {
+            "text2": [
+                "Úsporný",
+                "režim"
+            ],
+            "desc": ""
+        },
+        "UIMenu": {
+            "text2": [
+                "Nastavenie",
+                "zobrazenia"
+            ],
+            "desc": ""
+        },
+        "AdvancedMenu": {
+            "text2": [
+                "Pokročilé",
+                "nastavenia"
+            ],
+            "desc": ""
+        }
+    },
+    "menuOptions": {
+        "DCInCutoff": {
+            "text2": [
+                "Zdroj",
+                "napätia"
+            ],
+            "desc": "Zdroj napätia. Nastavenie napätia pre vypnutie (cutoff)  (DC=10V | nS=n*3.3V pre LiIon články)"
+        },
+        "MinVolCell": {
+            "text2": [
+                "Minimálne",
+                "napätie"
+            ],
+            "desc": "Minimálne napätie povolené na jeden článok (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)"
+        },
+        "QCMaxVoltage": {
+            "text2": [
+                "Obmedzenie QC",
+                "napätia"
+            ],
+            "desc": "Maximálne QC napätie ktoré si má systém vyžiadať"
+        },
+        "PDNegTimeout": {
+            "text2": [
+                "Čas vypršania",
+                "Power Delivery"
+            ],
+            "desc": "Čas vyjednávania Power Delivery v 100ms krokoch pre kompatibilitu s niektorými QC nabíjačkami (0: vypnuté)"
+        },
+        "BoostTemperature": {
+            "text2": [
+                "Boost",
+                "teplota"
+            ],
+            "desc": "Cieľová teplota pre prudký náhrev (v nastavených jednotkách)"
+        },
+        "AutoStart": {
+            "text2": [
+                "Automatické",
+                "spustenie"
+            ],
+            "desc": "Pri štarte spustiť režim spájkovania (V=Vyp | Z=Spájkovanie | S=Spanok | I=Spanok izbová teplota)"
+        },
+        "TempChangeShortStep": {
+            "text2": [
+                "Malý krok",
+                "teploty"
+            ],
+            "desc": "Zmena teploty pri krátkom stlačení tlačidla"
+        },
+        "TempChangeLongStep": {
+            "text2": [
+                "Veľký krok",
+                "teploty"
+            ],
+            "desc": "Zmena teploty pri držaní tlačidla"
+        },
+        "LockingMode": {
+            "text2": [
+                "Povoliť zámok",
+                "tlačidiel"
+            ],
+            "desc": "Zamknutie tlačidiel - dlhé stlačenie oboch naraz počas spájkovania (Z=Zakázať | B=Okrem boost | P=Plné zamknutie)"
+        },
+        "MotionSensitivity": {
+            "text2": [
+                "Citlivosť",
+                "pohybu"
+            ],
+            "desc": "Citlivosť detekcie pohybu (0=Vyp | 1=Min | ... | 9=Max)"
+        },
+        "SleepTemperature": {
+            "text2": [
+                "Pokojová",
+                "teplota"
+            ],
+            "desc": "Pokojová teplota (v nastavených jednotkách)"
+        },
+        "SleepTimeout": {
+            "text2": [
+                "Pokojový",
+                "režim po"
+            ],
+            "desc": "Pokojový režim po (s=sekundách | m=minútach)"
+        },
+        "ShutdownTimeout": {
+            "text2": [
+                "Vypnutie",
+                "po"
+            ],
+            "desc": "Čas na vypnutie (minúty)"
+        },
+        "HallEffSensitivity": {
+            "text2": [
+                "Citliv.",
+                "Hall"
+            ],
+            "desc": "Citlivosť Hallovho senzora pre detekciu spánku (0=Vyp | 1=Min | ... | 9=Max)"
+        },
+        "TemperatureUnit": {
+            "text2": [
+                "Jednotka",
+                "teploty"
+            ],
+            "desc": "Jednotky merania teploty (C=stupne Celzia | F=stupne Fahrenheita)"
+        },
+        "DisplayRotation": {
+            "text2": [
+                "Orientácia",
+                "displeja"
+            ],
+            "desc": "Orientácia displeja (P=Pravák | L=Ľavák | A=Auto)"
+        },
+        "CooldownBlink": {
+            "text2": [
+                "Blikanie pri",
+                "chladnutí"
+            ],
+            "desc": "Blikanie ukazovateľa teploty počas chladnutia hrotu"
+        },
+        "ScrollingSpeed": {
+            "text2": [
+                "Rýchlosť",
+                "skrolovania"
+            ],
+            "desc": "Rýchlosť pohybu tohto textu"
+        },
+        "ReverseButtonTempChange": {
+            "text2": [
+                "Otočenie",
+                "tlačidiel +/-"
+            ],
+            "desc": "Prehodenie tlačidiel na nastavovanie teploty"
+        },
+        "AnimSpeed": {
+            "text2": [
+                "Rýchlosť",
+                "animácií"
+            ],
+            "desc": "Rýchlosť animácií ikoniek v menu (O=off | P=pomaly | S=stredne | R=rýchlo)"
+        },
+        "AnimLoop": {
+            "text2": [
+                "Opakovanie",
+                "animácií"
+            ],
+            "desc": "Opakovanie animácií ikoniek v hlavnom menu"
+        },
+        "Brightness": {
+            "text2": [
+                "Jas",
+                "obrazovky"
+            ],
+            "desc": "Mení jas/kontrast OLED displeja"
+        },
+        "ColourInversion": {
+            "text2": [
+                "Invertovať",
+                "obrazovku"
+            ],
+            "desc": "Invertovať farby OLED displeja"
+        },
+        "LOGOTime": {
+            "text2": [
+                "Trvanie",
+                "boot loga"
+            ],
+            "desc": "Doba trvania boot loga (s=sekundy)"
+        },
+        "AdvancedIdle": {
+            "text2": [
+                "Detaily v",
+                "pokoj. režime"
+            ],
+            "desc": "Zobraziť detailné informácie v pokojovom režime (T=Zap | F=Vyp)"
+        },
+        "AdvancedSoldering": {
+            "text2": [
+                "Detaily počas",
+                "spájkovania"
+            ],
+            "desc": "Zobrazenie detailov počas spájkovania"
+        },
+        "PowerLimit": {
+            "text2": [
+                "Obmedzenie",
+                "výkonu"
+            ],
+            "desc": "Obmedzenie výkonu podľa použitého zdroja (watt)"
+        },
+        "CalibrateCJC": {
+            "text2": [
+                "Calibrate CJC",
+                "at next boot"
+            ],
+            "desc": "At next boot tip Cold Junction Compensation will be calibrated (not required if Delta T is < 5°C)"
+        },
+        "VoltageCalibration": {
+            "text2": [
+                "Kalibrácia",
+                "nap. napätia"
+            ],
+            "desc": "Kalibrácia napájacieho napätia. Krátke stlačenie mení nastavenie, dlhé stlačenie pre návrat"
+        },
+        "PowerPulsePower": {
+            "text2": [
+                "Intenzita",
+                "impulzu"
+            ],
+            "desc": "Impulz udržujúci napájací zdroj zapnutý (power banky) (watt)"
+        },
+        "PowerPulseWait": {
+            "text2": [
+                "Interval",
+                "impulzu"
+            ],
+            "desc": "Interval medzi impulzami udržujúcimi napájací zdroj zapnutý (x 2.5s)"
+        },
+        "PowerPulseDuration": {
+            "text2": [
+                "Dĺžka impulzu",
+                ""
+            ],
+            "desc": "Dĺžka impulzu udržujúci napájací zdroj zapnutý (x 250ms)"
+        },
+        "SettingsReset": {
+            "text2": [
+                "Obnovenie",
+                "nastavení"
+            ],
+            "desc": "Obnovenie nastavení na pôvodné hodnoty"
+        },
+        "LanguageSwitch": {
+            "text2": [
+                "Jazyk:",
+                " SK  Slovenčina"
+            ],
+            "desc": ""
+        }
+    }
+}

Translations/translation_SL.json

@@ -1,207 +1,341 @@
-{
-  "languageCode": "SL",
-  "languageLocalName": "Slovenščina",
-  "fonts": ["ascii_basic", "latin_extended"],
-  "tempUnitFahrenheit": false,
-  "messages": {
-    "SettingsCalibrationWarning": "Pred nadaljevanjem mora biti konica segreta na sobno temperaturo!",
-    "SettingsResetWarning": "Res želite ponastaviti na privzete nastavitve?",
-    "UVLOWarningString": "NIZKA U",
-    "UndervoltageString": "Nizka napetost",
-    "InputVoltageString": "Vhodna U: ",
-    "SleepingSimpleString": "Zzzz",
-    "SleepingAdvancedString": "Spim...",
-    "SleepingTipAdvancedString": "Konica",
-    "OffString": "Off"
-  },
-  "messagesWarn": {
-    "ResetOKMessage": "Reset OK",
-    "SettingsResetMessage": ["Nastavitve OK!", ""],
-    "NoAccelerometerMessage": ["Ni pospeševalnik", ""],
-    "NoPowerDeliveryMessage": ["Ni USB-PD čipa!", ""],
-    "LockingKeysString": "ZAKLENJ.",
-    "UnlockingKeysString": "ODKLENJ.",
-    "WarningKeysLockedString": "ZAKLENJ.",
-    "WarningThermalRunaway": ["Thermal", "Runaway"]
-  },
-  "characters": {
-    "SettingRightChar": "D",
-    "SettingLeftChar": "L",
-    "SettingAutoChar": "S",
-    "SettingOffChar": "U",
-    "SettingSlowChar": "P",
-    "SettingMediumChar": "M",
-    "SettingFastChar": "H",
-    "SettingStartNoneChar": "U",
-    "SettingStartSolderingChar": "S",
-    "SettingStartSleepChar": "Z",
-    "SettingStartSleepOffChar": "V",
-    "SettingSensitivityOff": "U",
-    "SettingSensitivityLow": "N",
-    "SettingSensitivityMedium": "S",
-    "SettingSensitivityHigh": "V",
-    "SettingLockDisableChar": "O",
-    "SettingLockBoostChar": "L",
-    "SettingLockFullChar": "P"
-  },
-  "menuGroups": {
-    "PowerMenu": {
-      "text2": ["Power", "settings"],
-      "desc": "Power settings"
-    },
-    "SolderingMenu": {
-      "text2": ["Nastavitve", "spajkanja"],
-      "desc": "Nastavitve spajkanja"
-    },
-    "PowerSavingMenu": {
-      "text2": ["Način", "spanja"],
-      "desc": "Nastavitve varčevanja z energijo"
-    },
-    "UIMenu": {
-      "text2": ["Uporabniški", "vmesnik"],
-      "desc": "Nastavitve uporabniškega vmesnika"
-    },
-    "AdvancedMenu": {
-      "text2": ["Napredne", "možnosti"],
-      "desc": "Napredne možnosti"
-    }
-  },
-  "menuOptions": {
-    "DCInCutoff": {
-      "text2": ["Vir", "napajanja"],
-      "desc": "Vir napajanja. Nastavi napetost izklopa. (DC 10V) (S 3.3V na celico)"
-    },
-    "SleepTemperature": {
-      "text2": ["Temp. med", "spanjem"],
-      "desc": "Temperatura med spanjem"
-    },
-    "SleepTimeout": {
-      "text2": ["Čas do", "spanja"],
-      "desc": "Čas pred spanjem (s=sekunde | m=minute)"
-    },
-    "ShutdownTimeout": {
-      "text2": ["Čas do", "izklopa"],
-      "desc": "Čas do izklopa (m=minute)"
-    },
-    "MotionSensitivity": {
-      "text2": ["Občutljivost", "premikanja"],
-      "desc": "0=izklopljeno | 1=najmanjša | ... | 9=največja"
-    },
-    "TemperatureUnit": {
-      "text2": ["Enota za", "temperaturo"],
-      "desc": "Enota za temperaturo (C=celzij | F=fahrenheit)"
-    },
-    "AdvancedIdle": {
-      "text2": ["Več info. na", "mir. zaslonu"],
-      "desc": "Prikaži več informacij z manjšo pisavo na mirovalnem zaslonu."
-    },
-    "DisplayRotation": {
-      "text2": ["Orientacija", "zaslona"],
-      "desc": "D=desničar | L=levičar | S=samodejno"
-    },
-    "BoostTemperature": {
-      "text2": ["Pospešena", "temp."],
-      "desc": "Temperatura v pospešenem načinu"
-    },
-    "AutoStart": {
-      "text2": ["Samodejni", "zagon"],
-      "desc": "Samodejno gretje konice ob vklopu (U=ugasnjeno | S=spajkanje | Z=spanje | V=spanje na sobni temperaturi)"
-    },
-    "CooldownBlink": {
-      "text2": ["Utripanje med", "hlajenjem"],
-      "desc": "Ko je konica še vroča, utripaj prikaz temperature med hlajenjem."
-    },
-    "TemperatureCalibration": {
-      "text2": ["Kalibriram", "temperaturo?"],
-      "desc": "Kalibracija temperature na konici."
-    },
-    "SettingsReset": {
-      "text2": ["Tovarniške", "nastavitve?"],
-      "desc": "Ponastavitev vseh nastavitev"
-    },
-    "VoltageCalibration": {
-      "text2": ["Kalibriram", "vhodno napetost?"],
-      "desc": "Kalibracija VIN (nastavitve z gumbi, dolg pritisk za izhod)"
-    },
-    "AdvancedSoldering": {
-      "text2": ["Več info na", "zaslonu spaj."],
-      "desc": "Prikaže več informacij z manjšo pisavo na zaslonu med spajkanjem."
-    },
-    "ScrollingSpeed": {
-      "text2": ["Hitrost", "besedila"],
-      "desc": "Hitrost, s katero se prikazuje besedilo (P=počasi | H=hitro)"
-    },
-    "QCMaxVoltage": {
-      "text2": ["QC", "napetost"],
-      "desc": "Moč napajalnega vira v vatih [W]"
-    },
-    "PDNegTimeout": {
-      "text2": ["PD", "timeout"],
-      "desc": "PD negotiation timeout in 100ms steps for compatibility with some QC chargers (0: disabled)"
-    },
-    "PowerLimit": {
-      "text2": ["Meja", "moči"],
-      "desc": "Največja dovoljena moč v vatih [W]"
-    },
-    "ReverseButtonTempChange": {
-      "text2": ["Obrni", "tipki + -?"],
-      "desc": "Zamenjaj funkciji gumbov."
-    },
-    "TempChangeShortStep": {
-      "text2": ["Kratka sprememba", "temperature?"],
-      "desc": "Temperatura se spremeni ob kratkem pritisku na gumb."
-    },
-    "TempChangeLongStep": {
-      "text2": ["Dolga sprememba", "temperature?"],
-      "desc": "Temperatura se spremeni ob dolgem pritisku na gumb."
-    },
-    "PowerPulsePower": {
-      "text2": ["Pulz", "moči"],
-      "desc": "Velikost moči za vzdrževanje budnosti."
-    },
-    "HallEffSensitivity": {
-      "text2": ["Občut.", "Hall son"],
-      "desc": "Občutljivost Hallove sonde za zaznavanje spanja (0=izklopljeno | 1=najmanjša | ... | 9=največja)"
-    },
-    "LockingMode": {
-      "text2": ["Omogoči", "zaklep gumbov"],
-      "desc": "Za zaklep med spajkanjem drži oba gumba (O=onemogoči | L=le pospešeno | P=polno)"
-    },
-    "MinVolCell": {
-      "text2": ["Minimum", "voltage"],
-      "desc": "Minimum allowed voltage per cell (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)"
-    },
-    "AnimLoop": {
-      "text2": ["Anim.", "loop"],
-      "desc": "Loop icon animations in main menu"
-    },
-    "AnimSpeed": {
-      "text2": ["Anim.", "speed"],
-      "desc": "Pace of icon animations in menu (O=off | P=slow | M=medium | H=fast)"
-    },
-    "PowerPulseWait": {
-      "text2": ["Power pulse", "delay"],
-      "desc": "Delay before keep-awake-pulse is triggered (x 2.5s)"
-    },
-    "PowerPulseDuration": {
-      "text2": ["Power pulse", "duration"],
-      "desc": "Keep-awake-pulse duration (x 250ms)"
-    },
-    "LanguageSwitch": {
-      "text2": ["Jezik:", " SL Slovenščina"],
-      "desc": ""
-    },
-    "Brightness": {
-      "text2": ["Screen", "brightness"],
-      "desc": "Adjust the brightness of the OLED screen"
-    },
-    "ColourInversion": {
-      "text2": ["Invert", "screen"],
-      "desc": "Invert the colours of the OLED screen"
-    },
-    "LOGOTime": {
-      "text2": ["Boot logo", "duration"],
-      "desc": "Sets the duration for the boot logo (s=seconds)"
-    }
-  }
-}
+{
+    "languageCode": "SL",
+    "languageLocalName": "Slovenščina",
+    "tempUnitFahrenheit": false,
+    "messages": {
+        "SettingsCalibrationWarning": "Before rebooting, make sure tip & handle are at room temperature!",
+        "CJCCalibrating": "calibrating",
+        "SettingsResetWarning": "Res želite ponastaviti na privzete nastavitve?",
+        "UVLOWarningString": "NIZKA U",
+        "UndervoltageString": "Nizka napetost",
+        "InputVoltageString": "Vhodna U: ",
+        "SleepingSimpleString": "Zzzz",
+        "SleepingAdvancedString": "Spim...",
+        "SleepingTipAdvancedString": "Konica",
+        "OffString": "Off",
+        "DeviceFailedValidationWarning": "Your device is most likely a counterfeit!"
+    },
+    "messagesWarn": {
+        "CJCCalibrationDone": [
+            "Calibration",
+            "done!"
+        ],
+        "ResetOKMessage": "Reset OK",
+        "SettingsResetMessage": [
+            "Nastavitve OK!",
+            ""
+        ],
+        "NoAccelerometerMessage": [
+            "Ni pospeševalnik",
+            ""
+        ],
+        "NoPowerDeliveryMessage": [
+            "Ni USB-PD čipa!",
+            ""
+        ],
+        "LockingKeysString": "ZAKLENJ.",
+        "UnlockingKeysString": "ODKLENJ.",
+        "WarningKeysLockedString": "ZAKLENJ.",
+        "WarningThermalRunaway": [
+            "Thermal",
+            "Runaway"
+        ]
+    },
+    "characters": {
+        "SettingRightChar": "D",
+        "SettingLeftChar": "L",
+        "SettingAutoChar": "S",
+        "SettingOffChar": "U",
+        "SettingSlowChar": "P",
+        "SettingMediumChar": "M",
+        "SettingFastChar": "H",
+        "SettingStartNoneChar": "U",
+        "SettingStartSolderingChar": "S",
+        "SettingStartSleepChar": "Z",
+        "SettingStartSleepOffChar": "V",
+        "SettingSensitivityOff": "U",
+        "SettingSensitivityLow": "N",
+        "SettingSensitivityMedium": "S",
+        "SettingSensitivityHigh": "V",
+        "SettingLockDisableChar": "O",
+        "SettingLockBoostChar": "L",
+        "SettingLockFullChar": "P"
+    },
+    "menuGroups": {
+        "PowerMenu": {
+            "text2": [
+                "Power",
+                "settings"
+            ],
+            "desc": ""
+        },
+        "SolderingMenu": {
+            "text2": [
+                "Nastavitve",
+                "spajkanja"
+            ],
+            "desc": ""
+        },
+        "PowerSavingMenu": {
+            "text2": [
+                "Način",
+                "spanja"
+            ],
+            "desc": ""
+        },
+        "UIMenu": {
+            "text2": [
+                "Uporabniški",
+                "vmesnik"
+            ],
+            "desc": ""
+        },
+        "AdvancedMenu": {
+            "text2": [
+                "Napredne",
+                "možnosti"
+            ],
+            "desc": ""
+        }
+    },
+    "menuOptions": {
+        "DCInCutoff": {
+            "text2": [
+                "Vir",
+                "napajanja"
+            ],
+            "desc": "Vir napajanja. Nastavi napetost izklopa. (DC 10V) (S 3.3V na celico)"
+        },
+        "MinVolCell": {
+            "text2": [
+                "Minimum",
+                "voltage"
+            ],
+            "desc": "Minimum allowed voltage per battery cell (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)"
+        },
+        "QCMaxVoltage": {
+            "text2": [
+                "QC",
+                "napetost"
+            ],
+            "desc": "Moč napajalnega vira v vatih [W]"
+        },
+        "PDNegTimeout": {
+            "text2": [
+                "PD",
+                "timeout"
+            ],
+            "desc": "PD negotiation timeout in 100ms steps for compatibility with some QC chargers"
+        },
+        "BoostTemperature": {
+            "text2": [
+                "Pospešena",
+                "temp."
+            ],
+            "desc": "Temperatura v pospešenem načinu"
+        },
+        "AutoStart": {
+            "text2": [
+                "Samodejni",
+                "zagon"
+            ],
+            "desc": "Samodejno gretje konice ob vklopu (U=ugasnjeno | S=spajkanje | Z=spanje | V=spanje na sobni temperaturi)"
+        },
+        "TempChangeShortStep": {
+            "text2": [
+                "Kratka sprememba",
+                "temperature?"
+            ],
+            "desc": "Temperatura se spremeni ob kratkem pritisku na gumb."
+        },
+        "TempChangeLongStep": {
+            "text2": [
+                "Dolga sprememba",
+                "temperature?"
+            ],
+            "desc": "Temperatura se spremeni ob dolgem pritisku na gumb."
+        },
+        "LockingMode": {
+            "text2": [
+                "Omogoči",
+                "zaklep gumbov"
+            ],
+            "desc": "Za zaklep med spajkanjem drži oba gumba (O=onemogoči | L=le pospešeno | P=polno)"
+        },
+        "MotionSensitivity": {
+            "text2": [
+                "Občutljivost",
+                "premikanja"
+            ],
+            "desc": "0=izklopljeno | 1=najmanjša | ... | 9=največja"
+        },
+        "SleepTemperature": {
+            "text2": [
+                "Temp. med",
+                "spanjem"
+            ],
+            "desc": "Temperatura med spanjem"
+        },
+        "SleepTimeout": {
+            "text2": [
+                "Čas do",
+                "spanja"
+            ],
+            "desc": "Čas pred spanjem (s=sekunde | m=minute)"
+        },
+        "ShutdownTimeout": {
+            "text2": [
+                "Čas do",
+                "izklopa"
+            ],
+            "desc": "Čas do izklopa (m=minute)"
+        },
+        "HallEffSensitivity": {
+            "text2": [
+                "Občut.",
+                "Hall son"
+            ],
+            "desc": "Občutljivost Hallove sonde za zaznavanje spanja (0=izklopljeno | 1=najmanjša | ... | 9=največja)"
+        },
+        "TemperatureUnit": {
+            "text2": [
+                "Enota za",
+                "temperaturo"
+            ],
+            "desc": "Enota za temperaturo (C=celzij | F=fahrenheit)"
+        },
+        "DisplayRotation": {
+            "text2": [
+                "Orientacija",
+                "zaslona"
+            ],
+            "desc": "D=desničar | L=levičar | S=samodejno"
+        },
+        "CooldownBlink": {
+            "text2": [
+                "Utripanje med",
+                "hlajenjem"
+            ],
+            "desc": "Ko je konica še vroča, utripaj prikaz temperature med hlajenjem."
+        },
+        "ScrollingSpeed": {
+            "text2": [
+                "Hitrost",
+                "besedila"
+            ],
+            "desc": "Hitrost, s katero se prikazuje besedilo (P=počasi | H=hitro)"
+        },
+        "ReverseButtonTempChange": {
+            "text2": [
+                "Obrni",
+                "tipki + -?"
+            ],
+            "desc": "Zamenjaj funkciji gumbov."
+        },
+        "AnimSpeed": {
+            "text2": [
+                "Anim.",
+                "speed"
+            ],
+            "desc": "Pace of icon animations in menu (O=off | P=slow | M=medium | H=fast)"
+        },
+        "AnimLoop": {
+            "text2": [
+                "Anim.",
+                "loop"
+            ],
+            "desc": "Loop icon animations in main menu"
+        },
+        "Brightness": {
+            "text2": [
+                "Screen",
+                "brightness"
+            ],
+            "desc": "Adjust the OLED screen brightness"
+        },
+        "ColourInversion": {
+            "text2": [
+                "Invert",
+                "screen"
+            ],
+            "desc": "Invert the OLED screen colors"
+        },
+        "LOGOTime": {
+            "text2": [
+                "Boot logo",
+                "duration"
+            ],
+            "desc": "Set boot logo duration (s=seconds)"
+        },
+        "AdvancedIdle": {
+            "text2": [
+                "Več info. na",
+                "mir. zaslonu"
+            ],
+            "desc": "Prikaži več informacij z manjšo pisavo na mirovalnem zaslonu."
+        },
+        "AdvancedSoldering": {
+            "text2": [
+                "Več info na",
+                "zaslonu spaj."
+            ],
+            "desc": "Prikaže več informacij z manjšo pisavo na zaslonu med spajkanjem."
+        },
+        "PowerLimit": {
+            "text2": [
+                "Meja",
+                "moči"
+            ],
+            "desc": "Največja dovoljena moč v vatih [W]"
+        },
+        "CalibrateCJC": {
+            "text2": [
+                "Calibrate CJC",
+                "at next boot"
+            ],
+            "desc": "At next boot tip Cold Junction Compensation will be calibrated (not required if Delta T is < 5°C)"
+        },
+        "VoltageCalibration": {
+            "text2": [
+                "Kalibriram",
+                "vhodno napetost?"
+            ],
+            "desc": "Kalibracija VIN (nastavitve z gumbi, dolg pritisk za izhod)"
+        },
+        "PowerPulsePower": {
+            "text2": [
+                "Pulz",
+                "moči"
+            ],
+            "desc": "Velikost moči za vzdrževanje budnosti."
+        },
+        "PowerPulseWait": {
+            "text2": [
+                "Power pulse",
+                "delay"
+            ],
+            "desc": "Delay before keep-awake-pulse is triggered (x 2.5s)"
+        },
+        "PowerPulseDuration": {
+            "text2": [
+                "Power pulse",
+                "duration"
+            ],
+            "desc": "Keep-awake-pulse duration (x 250ms)"
+        },
+        "SettingsReset": {
+            "text2": [
+                "Tovarniške",
+                "nastavitve?"
+            ],
+            "desc": "Ponastavitev vseh nastavitev"
+        },
+        "LanguageSwitch": {
+            "text2": [
+                "Jezik:",
+                " SL Slovenščina"
+            ],
+            "desc": ""
+        }
+    }
+}

Translations/translation_SR_CYRL.json

@@ -1,207 +1,341 @@
-{
-  "languageCode": "SR_CYRL",
-  "languageLocalName": "Српски",
-  "fonts": ["ascii_basic", "cyrillic"],
-  "tempUnitFahrenheit": false,
-  "messages": {
-    "SettingsCalibrationWarning": "Проверите да ли је врх охлађен на собну температуру пре него што наставите",
-    "SettingsResetWarning": "Да ли заиста желите да вратите поставке на фабричке вредности?",
-    "UVLOWarningString": "НИЗ.НАП.",
-    "UndervoltageString": "ПРЕНИЗАК НАПОН",
-    "InputVoltageString": "Ул. напон: ",
-    "SleepingSimpleString": "Сан",
-    "SleepingAdvancedString": "Спавање...",
-    "SleepingTipAdvancedString": "Врх:",
-    "OffString": "Иск"
-  },
-  "messagesWarn": {
-    "ResetOKMessage": "Reset OK",
-    "SettingsResetMessage": ["Certain settings", "were changed!"],
-    "NoAccelerometerMessage": ["No accelerometer", "detected!"],
-    "NoPowerDeliveryMessage": ["No USB-PD IC", "detected!"],
-    "LockingKeysString": "LOCKED",
-    "UnlockingKeysString": "UNLOCKED",
-    "WarningKeysLockedString": "!LOCKED!",
-    "WarningThermalRunaway": ["Thermal", "Runaway"]
-  },
-  "characters": {
-    "SettingRightChar": "Д",
-    "SettingLeftChar": "Л",
-    "SettingAutoChar": "А",
-    "SettingOffChar": "O",
-    "SettingSlowChar": "С",
-    "SettingMediumChar": "M",
-    "SettingFastChar": "Б",
-    "SettingStartNoneChar": "И",
-    "SettingStartSolderingChar": "Л",
-    "SettingStartSleepChar": "С",
-    "SettingStartSleepOffChar": "X",
-    "SettingSensitivityOff": "O",
-    "SettingSensitivityLow": "L",
-    "SettingSensitivityMedium": "M",
-    "SettingSensitivityHigh": "H",
-    "SettingLockDisableChar": "D",
-    "SettingLockBoostChar": "B",
-    "SettingLockFullChar": "F"
-  },
-  "menuGroups": {
-    "PowerMenu": {
-      "text2": ["Power", "settings"],
-      "desc": "Power settings"
-    },
-    "SolderingMenu": {
-      "text2": ["Поставке", "лемљења"],
-      "desc": "Поставке режима лемљења."
-    },
-    "PowerSavingMenu": {
-      "text2": ["Уштеда", "енергије"],
-      "desc": "Поставке режима мировања."
-    },
-    "UIMenu": {
-      "text2": ["Корисничко", "сучеље"],
-      "desc": "Поставке корисничког сучеља."
-    },
-    "AdvancedMenu": {
-      "text2": ["Напредне", "поставке"],
-      "desc": "Напредне поставке."
-    }
-  },
-  "menuOptions": {
-    "DCInCutoff": {
-      "text2": ["Врста", "напајања"],
-      "desc": "Тип напајања; одређује најнижи радни напон. (DC=адаптер [10V] | S=батерија [3,3V по ћелији])"
-    },
-    "SleepTemperature": {
-      "text2": ["Темп.", "спавања"],
-      "desc": "Температура на коју се спушта лемилица након одређеног времена мировања. (C | F)"
-    },
-    "SleepTimeout": {
-      "text2": ["Време до", "спавања"],
-      "desc": "Време мировања након кога лемилица спушта температуру. (m=минути | s=секунде)"
-    },
-    "ShutdownTimeout": {
-      "text2": ["Време до", "гашења"],
-      "desc": "Време мировања након кога се лемилица гаси. (m=минути)"
-    },
-    "MotionSensitivity": {
-      "text2": ["Осетљивост", "на покрет"],
-      "desc": "Осетљивост сензора покрета. (0=искључено | 1=најмање осетљиво | ... | 9=најосетљивије)"
-    },
-    "TemperatureUnit": {
-      "text2": ["Јединица", "температуре"],
-      "desc": "Јединице у којима се приказује температура. (C=целзијус | F=фаренхајт)"
-    },
-    "AdvancedIdle": {
-      "text2": ["Детаљи током", "мировања"],
-      "desc": "Приказивање детаљних информација на екрану током мировања."
-    },
-    "DisplayRotation": {
-      "text2": ["Оријентација", "екрана"],
-      "desc": "Како је окренут екран. (Д=за десноруке | Л=за леворуке | А=аутоматски)"
-    },
-    "BoostTemperature": {
-      "text2": ["Темп.", "појачања"],
-      "desc": "Температура врха лемилице у току појачања."
-    },
-    "AutoStart": {
-      "text2": ["Врући", "старт"],
-      "desc": "Лемилица одмах по покретању прелази у режим лемљења и греје се. (И=искључити | Л=лемљење | С=спавати | X=спавати собна температура)"
-    },
-    "CooldownBlink": {
-      "text2": ["Упозорење", "при хлађењу"],
-      "desc": "Приказ температуре трепће приликом хлађења докле год је врх и даље врућ."
-    },
-    "TemperatureCalibration": {
-      "text2": ["Калибрација", "температуре"],
-      "desc": "Калибрисање одступања температуре врха у односу на дршку."
-    },
-    "SettingsReset": {
-      "text2": ["Фабричке", "поставке"],
-      "desc": "Враћање свих поставки на фабричке вредности."
-    },
-    "VoltageCalibration": {
-      "text2": ["Калибрација", "улазног напона"],
-      "desc": "Калибрисање улазног напона. Подешава се на тастере; дуги притисак за крај."
-    },
-    "AdvancedSoldering": {
-      "text2": ["Детаљи током", "лемљења"],
-      "desc": "Приказивање детаљних информација на екрану током лемљења."
-    },
-    "ScrollingSpeed": {
-      "text2": ["Брзина", "порука"],
-      "desc": "Брзина кретања описних порука попут ове. (С=споро | Б=брзо)"
-    },
-    "QCMaxVoltage": {
-      "text2": ["Улазна", "снага"],
-      "desc": "Снага напајања у ватима."
-    },
-    "PDNegTimeout": {
-      "text2": ["PD", "timeout"],
-      "desc": "PD negotiation timeout in 100ms steps for compatibility with some QC chargers"
-    },
-    "PowerLimit": {
-      "text2": ["Power", "limit"],
-      "desc": "Maximum power the iron can use (W=watt)"
-    },
-    "ReverseButtonTempChange": {
-      "text2": ["Swap", "+ - keys"],
-      "desc": "Reverse assignment of buttons for temperature adjustment"
-    },
-    "TempChangeShortStep": {
-      "text2": ["Temp change", "short"],
-      "desc": "Temperature-change-increment on short button press"
-    },
-    "TempChangeLongStep": {
-      "text2": ["Temp change", "long"],
-      "desc": "Temperature-change-increment on long button press"
-    },
-    "PowerPulsePower": {
-      "text2": ["Power", "pulse"],
-      "desc": "Intensity of power of keep-awake-pulse (watt)"
-    },
-    "HallEffSensitivity": {
-      "text2": ["Hall sensor", "sensitivity"],
-      "desc": "Sensitivity of the Hall effect sensor to detect sleep (0=искључено | 1=најмање осетљиво | ... | 9=најосетљивије)"
-    },
-    "LockingMode": {
-      "text2": ["Allow locking", "buttons"],
-      "desc": "While soldering, hold down both buttons to toggle locking them (D=disable | B=boost mode only | F=full locking)"
-    },
-    "MinVolCell": {
-      "text2": ["Minimum", "voltage"],
-      "desc": "Minimum allowed voltage per cell (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)"
-    },
-    "AnimLoop": {
-      "text2": ["Anim.", "loop"],
-      "desc": "Loop icon animations in main menu"
-    },
-    "AnimSpeed": {
-      "text2": ["Anim.", "speed"],
-      "desc": "Pace of icon animations in menu (O=off | С=slow | M=medium | Б=fast)"
-    },
-    "PowerPulseWait": {
-      "text2": ["Power pulse", "delay"],
-      "desc": "Delay before keep-awake-pulse is triggered (x 2.5с)"
-    },
-    "PowerPulseDuration": {
-      "text2": ["Power pulse", "duration"],
-      "desc": "Keep-awake-pulse duration (x 250мс)"
-    },
-    "LanguageSwitch": {
-      "text2": ["Jезик:", " SR      Српски"],
-      "desc": ""
-    },
-    "Brightness": {
-      "text2": ["Screen", "brightness"],
-      "desc": "Adjust the brightness of the OLED screen"
-    },
-    "ColourInversion": {
-      "text2": ["Invert", "screen"],
-      "desc": "Invert the colours of the OLED screen"
-    },
-    "LOGOTime": {
-      "text2": ["Boot logo", "duration"],
-      "desc": "Sets the duration for the boot logo (s=seconds)"
-    }
-  }
-}
+{
+    "languageCode": "SR_CYRL",
+    "languageLocalName": "Српски",
+    "tempUnitFahrenheit": false,
+    "messages": {
+        "SettingsCalibrationWarning": "Before rebooting, make sure tip & handle are at room temperature!",
+        "CJCCalibrating": "calibrating",
+        "SettingsResetWarning": "Да ли заиста желите да вратите поставке на фабричке вредности?",
+        "UVLOWarningString": "НИЗ.НАП.",
+        "UndervoltageString": "ПРЕНИЗАК НАПОН",
+        "InputVoltageString": "Ул. напон: ",
+        "SleepingSimpleString": "Сан",
+        "SleepingAdvancedString": "Спавање...",
+        "SleepingTipAdvancedString": "Врх:",
+        "OffString": "Иск",
+        "DeviceFailedValidationWarning": "Your device is most likely a counterfeit!"
+    },
+    "messagesWarn": {
+        "CJCCalibrationDone": [
+            "Calibration",
+            "done!"
+        ],
+        "ResetOKMessage": "Reset OK",
+        "SettingsResetMessage": [
+            "Certain settings",
+            "were changed!"
+        ],
+        "NoAccelerometerMessage": [
+            "No accelerometer",
+            "detected!"
+        ],
+        "NoPowerDeliveryMessage": [
+            "No USB-PD IC",
+            "detected!"
+        ],
+        "LockingKeysString": "LOCKED",
+        "UnlockingKeysString": "UNLOCKED",
+        "WarningKeysLockedString": "!LOCKED!",
+        "WarningThermalRunaway": [
+            "Thermal",
+            "Runaway"
+        ]
+    },
+    "characters": {
+        "SettingRightChar": "Д",
+        "SettingLeftChar": "Л",
+        "SettingAutoChar": "А",
+        "SettingOffChar": "O",
+        "SettingSlowChar": "С",
+        "SettingMediumChar": "M",
+        "SettingFastChar": "Б",
+        "SettingStartNoneChar": "И",
+        "SettingStartSolderingChar": "Л",
+        "SettingStartSleepChar": "С",
+        "SettingStartSleepOffChar": "X",
+        "SettingSensitivityOff": "O",
+        "SettingSensitivityLow": "L",
+        "SettingSensitivityMedium": "M",
+        "SettingSensitivityHigh": "H",
+        "SettingLockDisableChar": "D",
+        "SettingLockBoostChar": "B",
+        "SettingLockFullChar": "F"
+    },
+    "menuGroups": {
+        "PowerMenu": {
+            "text2": [
+                "Power",
+                "settings"
+            ],
+            "desc": ""
+        },
+        "SolderingMenu": {
+            "text2": [
+                "Поставке",
+                "лемљења"
+            ],
+            "desc": ""
+        },
+        "PowerSavingMenu": {
+            "text2": [
+                "Уштеда",
+                "енергије"
+            ],
+            "desc": ""
+        },
+        "UIMenu": {
+            "text2": [
+                "Корисничко",
+                "сучеље"
+            ],
+            "desc": ""
+        },
+        "AdvancedMenu": {
+            "text2": [
+                "Напредне",
+                "поставке"
+            ],
+            "desc": ""
+        }
+    },
+    "menuOptions": {
+        "DCInCutoff": {
+            "text2": [
+                "Врста",
+                "напајања"
+            ],
+            "desc": "Тип напајања; одређује најнижи радни напон. (DC=адаптер [10V] | S=батерија [3,3V по ћелији])"
+        },
+        "MinVolCell": {
+            "text2": [
+                "Minimum",
+                "voltage"
+            ],
+            "desc": "Minimum allowed voltage per battery cell (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)"
+        },
+        "QCMaxVoltage": {
+            "text2": [
+                "Улазна",
+                "снага"
+            ],
+            "desc": "Снага напајања у ватима."
+        },
+        "PDNegTimeout": {
+            "text2": [
+                "PD",
+                "timeout"
+            ],
+            "desc": "PD negotiation timeout in 100ms steps for compatibility with some QC chargers"
+        },
+        "BoostTemperature": {
+            "text2": [
+                "Темп.",
+                "појачања"
+            ],
+            "desc": "Температура врха лемилице у току појачања."
+        },
+        "AutoStart": {
+            "text2": [
+                "Врући",
+                "старт"
+            ],
+            "desc": "Лемилица одмах по покретању прелази у режим лемљења и греје се. (И=искључити | Л=лемљење | С=спавати | X=спавати собна температура)"
+        },
+        "TempChangeShortStep": {
+            "text2": [
+                "Temp change",
+                "short"
+            ],
+            "desc": "Temperature-change-increment on short button press"
+        },
+        "TempChangeLongStep": {
+            "text2": [
+                "Temp change",
+                "long"
+            ],
+            "desc": "Temperature-change-increment on long button press"
+        },
+        "LockingMode": {
+            "text2": [
+                "Allow locking",
+                "buttons"
+            ],
+            "desc": "While soldering, hold down both buttons to toggle locking them (D=disable | B=boost mode only | F=full locking)"
+        },
+        "MotionSensitivity": {
+            "text2": [
+                "Осетљивост",
+                "на покрет"
+            ],
+            "desc": "Осетљивост сензора покрета. (0=искључено | 1=најмање осетљиво | ... | 9=најосетљивије)"
+        },
+        "SleepTemperature": {
+            "text2": [
+                "Темп.",
+                "спавања"
+            ],
+            "desc": "Температура на коју се спушта лемилица након одређеног времена мировања. (C | F)"
+        },
+        "SleepTimeout": {
+            "text2": [
+                "Време до",
+                "спавања"
+            ],
+            "desc": "Време мировања након кога лемилица спушта температуру. (m=минути | s=секунде)"
+        },
+        "ShutdownTimeout": {
+            "text2": [
+                "Време до",
+                "гашења"
+            ],
+            "desc": "Време мировања након кога се лемилица гаси. (m=минути)"
+        },
+        "HallEffSensitivity": {
+            "text2": [
+                "Hall sensor",
+                "sensitivity"
+            ],
+            "desc": "Sensitivity to magnets (0=искључено | 1=најмање осетљиво | ... | 9=најосетљивије)"
+        },
+        "TemperatureUnit": {
+            "text2": [
+                "Јединица",
+                "температуре"
+            ],
+            "desc": "Јединице у којима се приказује температура. (C=целзијус | F=фаренхајт)"
+        },
+        "DisplayRotation": {
+            "text2": [
+                "Оријентација",
+                "екрана"
+            ],
+            "desc": "Како је окренут екран. (Д=за десноруке | Л=за леворуке | А=аутоматски)"
+        },
+        "CooldownBlink": {
+            "text2": [
+                "Упозорење",
+                "при хлађењу"
+            ],
+            "desc": "Приказ температуре трепће приликом хлађења докле год је врх и даље врућ."
+        },
+        "ScrollingSpeed": {
+            "text2": [
+                "Брзина",
+                "порука"
+            ],
+            "desc": "Брзина кретања описних порука попут ове. (С=споро | Б=брзо)"
+        },
+        "ReverseButtonTempChange": {
+            "text2": [
+                "Swap",
+                "+ - keys"
+            ],
+            "desc": "Reverse assignment of buttons for temperature adjustment"
+        },
+        "AnimSpeed": {
+            "text2": [
+                "Anim.",
+                "speed"
+            ],
+            "desc": "Pace of icon animations in menu (O=off | С=slow | M=medium | Б=fast)"
+        },
+        "AnimLoop": {
+            "text2": [
+                "Anim.",
+                "loop"
+            ],
+            "desc": "Loop icon animations in main menu"
+        },
+        "Brightness": {
+            "text2": [
+                "Screen",
+                "brightness"
+            ],
+            "desc": "Adjust the OLED screen brightness"
+        },
+        "ColourInversion": {
+            "text2": [
+                "Invert",
+                "screen"
+            ],
+            "desc": "Invert the OLED screen colors"
+        },
+        "LOGOTime": {
+            "text2": [
+                "Boot logo",
+                "duration"
+            ],
+            "desc": "Set boot logo duration (s=seconds)"
+        },
+        "AdvancedIdle": {
+            "text2": [
+                "Детаљи током",
+                "мировања"
+            ],
+            "desc": "Приказивање детаљних информација на екрану током мировања."
+        },
+        "AdvancedSoldering": {
+            "text2": [
+                "Детаљи током",
+                "лемљења"
+            ],
+            "desc": "Приказивање детаљних информација на екрану током лемљења."
+        },
+        "PowerLimit": {
+            "text2": [
+                "Power",
+                "limit"
+            ],
+            "desc": "Maximum power the iron can use (W=watt)"
+        },
+        "CalibrateCJC": {
+            "text2": [
+                "Calibrate CJC",
+                "at next boot"
+            ],
+            "desc": "At next boot tip Cold Junction Compensation will be calibrated (not required if Delta T is < 5 C)"
+        },
+        "VoltageCalibration": {
+            "text2": [
+                "Калибрација",
+                "улазног напона"
+            ],
+            "desc": "Калибрисање улазног напона. Подешава се на тастере; дуги притисак за крај."
+        },
+        "PowerPulsePower": {
+            "text2": [
+                "Power",
+                "pulse"
+            ],
+            "desc": "Intensity of power of keep-awake-pulse (W=watt)"
+        },
+        "PowerPulseWait": {
+            "text2": [
+                "Power pulse",
+                "delay"
+            ],
+            "desc": "Delay before keep-awake-pulse is triggered (x 2.5с)"
+        },
+        "PowerPulseDuration": {
+            "text2": [
+                "Power pulse",
+                "duration"
+            ],
+            "desc": "Keep-awake-pulse duration (x 250мс)"
+        },
+        "SettingsReset": {
+            "text2": [
+                "Фабричке",
+                "поставке"
+            ],
+            "desc": "Враћање свих поставки на фабричке вредности."
+        },
+        "LanguageSwitch": {
+            "text2": [
+                "Jезик:",
+                " SR      Српски"
+            ],
+            "desc": ""
+        }
+    }
+}

Translations/translation_SR_LATN.json

@@ -1,207 +1,341 @@
-{
-  "languageCode": "SR_LATN",
-  "languageLocalName": "Srpski",
-  "fonts": ["ascii_basic", "latin_extended"],
-  "tempUnitFahrenheit": false,
-  "messages": {
-    "SettingsCalibrationWarning": "Proverite da li je vrh ohlađen na sobnu temperaturu pre nego što nastavite",
-    "SettingsResetWarning": "Da li zaista želite da vratite postavke na fabričke vrednosti?",
-    "UVLOWarningString": "NIZ.NAP.",
-    "UndervoltageString": "PRENIZAK NAPON",
-    "InputVoltageString": "Ul. napon: ",
-    "SleepingSimpleString": "Zzz",
-    "SleepingAdvancedString": "Spavanje...",
-    "SleepingTipAdvancedString": "Vrh:",
-    "OffString": "Isk"
-  },
-  "messagesWarn": {
-    "ResetOKMessage": "Reset OK",
-    "SettingsResetMessage": ["Certain settings", "were changed!"],
-    "NoAccelerometerMessage": ["No accelerometer", "detected!"],
-    "NoPowerDeliveryMessage": ["No USB-PD IC", "detected!"],
-    "LockingKeysString": "LOCKED",
-    "UnlockingKeysString": "UNLOCKED",
-    "WarningKeysLockedString": "!LOCKED!",
-    "WarningThermalRunaway": ["Thermal", "Runaway"]
-  },
-  "characters": {
-    "SettingRightChar": "D",
-    "SettingLeftChar": "L",
-    "SettingAutoChar": "A",
-    "SettingOffChar": "O",
-    "SettingSlowChar": "S",
-    "SettingMediumChar": "M",
-    "SettingFastChar": "B",
-    "SettingStartNoneChar": "I",
-    "SettingStartSolderingChar": "L",
-    "SettingStartSleepChar": "S",
-    "SettingStartSleepOffChar": "X",
-    "SettingSensitivityOff": "O",
-    "SettingSensitivityLow": "L",
-    "SettingSensitivityMedium": "M",
-    "SettingSensitivityHigh": "H",
-    "SettingLockDisableChar": "D",
-    "SettingLockBoostChar": "B",
-    "SettingLockFullChar": "F"
-  },
-  "menuGroups": {
-    "PowerMenu": {
-      "text2": ["Power", "settings"],
-      "desc": "Power settings"
-    },
-    "SolderingMenu": {
-      "text2": ["Postavke", "lemljenja"],
-      "desc": "Postavke režima lemljenja."
-    },
-    "PowerSavingMenu": {
-      "text2": ["Ušteda", "energije"],
-      "desc": "Postavke režima mirovanja."
-    },
-    "UIMenu": {
-      "text2": ["Korisničko", "sučelje"],
-      "desc": "Postavke korisničkog sučelja."
-    },
-    "AdvancedMenu": {
-      "text2": ["Napredne", "postavke"],
-      "desc": "Napredne postavke."
-    }
-  },
-  "menuOptions": {
-    "DCInCutoff": {
-      "text2": ["Vrsta", "napajanja"],
-      "desc": "Tip napajanja; određuje najniži radni napon. (DC=adapter [10V], S=baterija [3,3V po ćeliji])"
-    },
-    "SleepTemperature": {
-      "text2": ["Temp.", "spavanja"],
-      "desc": "Temperatura na koju se spušta lemilica nakon određenog vremena mirovanja. (C | F)"
-    },
-    "SleepTimeout": {
-      "text2": ["Vreme do", "spavanja"],
-      "desc": "Vreme mirovanja nakon koga lemilica spušta temperaturu. (m=minuti | s=sekunde)"
-    },
-    "ShutdownTimeout": {
-      "text2": ["Vreme do", "gašenja"],
-      "desc": "Vreme mirovanja nakon koga se lemilica gasi. (m=minuti)"
-    },
-    "MotionSensitivity": {
-      "text2": ["Osetljivost", "na pokret"],
-      "desc": "Osetljivost senzora pokreta. (0=isključeno | 1=najmanje osetljivo | ... | 9=najosetljivije)"
-    },
-    "TemperatureUnit": {
-      "text2": ["Jedinica", "temperature"],
-      "desc": "Jedinice u kojima se prikazuje temperatura. (C=celzijus | F=farenhajt)"
-    },
-    "AdvancedIdle": {
-      "text2": ["Detalji tokom", "mirovanja"],
-      "desc": "Prikazivanje detaljnih informacija na ekranu tokom mirovanja."
-    },
-    "DisplayRotation": {
-      "text2": ["Orijentacija", "ekrana"],
-      "desc": "Kako je okrenut ekran. (D=za desnoruke | L=za levoruke | A=automatski)"
-    },
-    "BoostTemperature": {
-      "text2": ["Temp.", "pojačanja"],
-      "desc": "Temperatura vrha lemilice u toku pojačanja."
-    },
-    "AutoStart": {
-      "text2": ["Vrući", "start"],
-      "desc": "Lemilica odmah po pokretanju prelazi u režim lemljenja i greje se. (I=isključiti | L=lemljenje | S=spavati | X=spavati sobna temperatura)"
-    },
-    "CooldownBlink": {
-      "text2": ["Upozorenje", "pri hlađenju"],
-      "desc": "Prikaz temperature trepće prilikom hlađenja dokle god je vrh i dalje vruć."
-    },
-    "TemperatureCalibration": {
-      "text2": ["Kalibracija", "temperature"],
-      "desc": "Kalibrisanje odstupanja temperature vrha u odnosu na dršku."
-    },
-    "SettingsReset": {
-      "text2": ["Fabričke", "postavke"],
-      "desc": "Vraćanje svih postavki na fabričke vrednosti."
-    },
-    "VoltageCalibration": {
-      "text2": ["Kalibracija", "ulaznog napona"],
-      "desc": "Kalibrisanje ulaznog napona. Podešava se na tastere; dugi pritisak za kraj."
-    },
-    "AdvancedSoldering": {
-      "text2": ["Detalji tokom", "lemljenja"],
-      "desc": "Prikazivanje detaljnih informacija na ekranu tokom lemljenja."
-    },
-    "ScrollingSpeed": {
-      "text2": ["Brzina", "poruka"],
-      "desc": "Brzina kretanja opisnih poruka poput ove. (S=sporo | B=brzo)"
-    },
-    "QCMaxVoltage": {
-      "text2": ["Ulazna", "snaga"],
-      "desc": "Snaga napajanja u vatima."
-    },
-    "PDNegTimeout": {
-      "text2": ["PD", "timeout"],
-      "desc": "PD negotiation timeout in 100ms steps for compatibility with some QC chargers"
-    },
-    "PowerLimit": {
-      "text2": ["Power", "limit"],
-      "desc": "Maximum power the iron can use (W=watt)"
-    },
-    "ReverseButtonTempChange": {
-      "text2": ["Swap", "+ - keys"],
-      "desc": "Reverse assignment of buttons for temperature adjustment"
-    },
-    "TempChangeShortStep": {
-      "text2": ["Temp change", "short"],
-      "desc": "Temperature-change-increment on short button press"
-    },
-    "TempChangeLongStep": {
-      "text2": ["Temp change", "long"],
-      "desc": "Temperature-change-increment on long button press"
-    },
-    "PowerPulsePower": {
-      "text2": ["Power", "pulse"],
-      "desc": "Intensity of power of keep-awake-pulse (watt)"
-    },
-    "HallEffSensitivity": {
-      "text2": ["Hall sensor", "sensitivity"],
-      "desc": "Sensitivity of the Hall effect sensor to detect sleep (0=isključeno | 1=najmanje osetljivo | ... | 9=najosetljivije)"
-    },
-    "LockingMode": {
-      "text2": ["Allow locking", "buttons"],
-      "desc": "While soldering, hold down both buttons to toggle locking them (D=disable | B=boost mode only | F=full locking)"
-    },
-    "MinVolCell": {
-      "text2": ["Minimum", "voltage"],
-      "desc": "Minimum allowed voltage per cell (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)"
-    },
-    "AnimLoop": {
-      "text2": ["Anim.", "loop"],
-      "desc": "Loop icon animations in main menu"
-    },
-    "AnimSpeed": {
-      "text2": ["Anim.", "speed"],
-      "desc": "Pace of icon animations in menu (O=off | S=slow | M=medium | B=fast)"
-    },
-    "PowerPulseWait": {
-      "text2": ["Power pulse", "delay"],
-      "desc": "Delay before keep-awake-pulse is triggered (x 2.5s)"
-    },
-    "PowerPulseDuration": {
-      "text2": ["Power pulse", "duration"],
-      "desc": "Keep-awake-pulse duration (x 250ms)"
-    },
-    "LanguageSwitch": {
-      "text2": ["Jezik:", " SR      Srpski"],
-      "desc": ""
-    },
-    "Brightness": {
-      "text2": ["Screen", "brightness"],
-      "desc": "Adjust the brightness of the OLED screen"
-    },
-    "ColourInversion": {
-      "text2": ["Invert", "screen"],
-      "desc": "Invert the colours of the OLED screen"
-    },
-    "LOGOTime": {
-      "text2": ["Boot logo", "duration"],
-      "desc": "Sets the duration for the boot logo (s=seconds)"
-    }
-  }
-}
+{
+    "languageCode": "SR_LATN",
+    "languageLocalName": "Srpski",
+    "tempUnitFahrenheit": false,
+    "messages": {
+        "SettingsCalibrationWarning": "Before rebooting, make sure tip & handle are at room temperature!",
+        "CJCCalibrating": "calibrating",
+        "SettingsResetWarning": "Da li zaista želite da vratite postavke na fabričke vrednosti?",
+        "UVLOWarningString": "NIZ.NAP.",
+        "UndervoltageString": "PRENIZAK NAPON",
+        "InputVoltageString": "Ul. napon: ",
+        "SleepingSimpleString": "Zzz",
+        "SleepingAdvancedString": "Spavanje...",
+        "SleepingTipAdvancedString": "Vrh:",
+        "OffString": "Isk",
+        "DeviceFailedValidationWarning": "Your device is most likely a counterfeit!"
+    },
+    "messagesWarn": {
+        "CJCCalibrationDone": [
+            "Calibration",
+            "done!"
+        ],
+        "ResetOKMessage": "Reset OK",
+        "SettingsResetMessage": [
+            "Certain settings",
+            "were changed!"
+        ],
+        "NoAccelerometerMessage": [
+            "No accelerometer",
+            "detected!"
+        ],
+        "NoPowerDeliveryMessage": [
+            "No USB-PD IC",
+            "detected!"
+        ],
+        "LockingKeysString": "LOCKED",
+        "UnlockingKeysString": "UNLOCKED",
+        "WarningKeysLockedString": "!LOCKED!",
+        "WarningThermalRunaway": [
+            "Thermal",
+            "Runaway"
+        ]
+    },
+    "characters": {
+        "SettingRightChar": "D",
+        "SettingLeftChar": "L",
+        "SettingAutoChar": "A",
+        "SettingOffChar": "O",
+        "SettingSlowChar": "S",
+        "SettingMediumChar": "M",
+        "SettingFastChar": "B",
+        "SettingStartNoneChar": "I",
+        "SettingStartSolderingChar": "L",
+        "SettingStartSleepChar": "S",
+        "SettingStartSleepOffChar": "X",
+        "SettingSensitivityOff": "O",
+        "SettingSensitivityLow": "L",
+        "SettingSensitivityMedium": "M",
+        "SettingSensitivityHigh": "H",
+        "SettingLockDisableChar": "D",
+        "SettingLockBoostChar": "B",
+        "SettingLockFullChar": "F"
+    },
+    "menuGroups": {
+        "PowerMenu": {
+            "text2": [
+                "Power",
+                "settings"
+            ],
+            "desc": ""
+        },
+        "SolderingMenu": {
+            "text2": [
+                "Postavke",
+                "lemljenja"
+            ],
+            "desc": ""
+        },
+        "PowerSavingMenu": {
+            "text2": [
+                "Ušteda",
+                "energije"
+            ],
+            "desc": ""
+        },
+        "UIMenu": {
+            "text2": [
+                "Korisničko",
+                "sučelje"
+            ],
+            "desc": ""
+        },
+        "AdvancedMenu": {
+            "text2": [
+                "Napredne",
+                "postavke"
+            ],
+            "desc": ""
+        }
+    },
+    "menuOptions": {
+        "DCInCutoff": {
+            "text2": [
+                "Vrsta",
+                "napajanja"
+            ],
+            "desc": "Tip napajanja; određuje najniži radni napon. (DC=adapter [10V], S=baterija [3,3V po ćeliji])"
+        },
+        "MinVolCell": {
+            "text2": [
+                "Minimum",
+                "voltage"
+            ],
+            "desc": "Minimum allowed voltage per battery cell (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)"
+        },
+        "QCMaxVoltage": {
+            "text2": [
+                "Ulazna",
+                "snaga"
+            ],
+            "desc": "Snaga napajanja u vatima."
+        },
+        "PDNegTimeout": {
+            "text2": [
+                "PD",
+                "timeout"
+            ],
+            "desc": "PD negotiation timeout in 100ms steps for compatibility with some QC chargers"
+        },
+        "BoostTemperature": {
+            "text2": [
+                "Temp.",
+                "pojačanja"
+            ],
+            "desc": "Temperatura vrha lemilice u toku pojačanja."
+        },
+        "AutoStart": {
+            "text2": [
+                "Vrući",
+                "start"
+            ],
+            "desc": "Lemilica odmah po pokretanju prelazi u režim lemljenja i greje se. (I=isključiti | L=lemljenje | S=spavati | X=spavati sobna temperatura)"
+        },
+        "TempChangeShortStep": {
+            "text2": [
+                "Temp change",
+                "short"
+            ],
+            "desc": "Temperature-change-increment on short button press"
+        },
+        "TempChangeLongStep": {
+            "text2": [
+                "Temp change",
+                "long"
+            ],
+            "desc": "Temperature-change-increment on long button press"
+        },
+        "LockingMode": {
+            "text2": [
+                "Allow locking",
+                "buttons"
+            ],
+            "desc": "While soldering, hold down both buttons to toggle locking them (D=disable | B=boost mode only | F=full locking)"
+        },
+        "MotionSensitivity": {
+            "text2": [
+                "Osetljivost",
+                "na pokret"
+            ],
+            "desc": "Osetljivost senzora pokreta. (0=isključeno | 1=najmanje osetljivo | ... | 9=najosetljivije)"
+        },
+        "SleepTemperature": {
+            "text2": [
+                "Temp.",
+                "spavanja"
+            ],
+            "desc": "Temperatura na koju se spušta lemilica nakon određenog vremena mirovanja. (C | F)"
+        },
+        "SleepTimeout": {
+            "text2": [
+                "Vreme do",
+                "spavanja"
+            ],
+            "desc": "Vreme mirovanja nakon koga lemilica spušta temperaturu. (m=minuti | s=sekunde)"
+        },
+        "ShutdownTimeout": {
+            "text2": [
+                "Vreme do",
+                "gašenja"
+            ],
+            "desc": "Vreme mirovanja nakon koga se lemilica gasi. (m=minuti)"
+        },
+        "HallEffSensitivity": {
+            "text2": [
+                "Hall sensor",
+                "sensitivity"
+            ],
+            "desc": "Sensitivity to magnets (0=isključeno | 1=najmanje osetljivo | ... | 9=najosetljivije)"
+        },
+        "TemperatureUnit": {
+            "text2": [
+                "Jedinica",
+                "temperature"
+            ],
+            "desc": "Jedinice u kojima se prikazuje temperatura. (C=celzijus | F=farenhajt)"
+        },
+        "DisplayRotation": {
+            "text2": [
+                "Orijentacija",
+                "ekrana"
+            ],
+            "desc": "Kako je okrenut ekran. (D=za desnoruke | L=za levoruke | A=automatski)"
+        },
+        "CooldownBlink": {
+            "text2": [
+                "Upozorenje",
+                "pri hlađenju"
+            ],
+            "desc": "Prikaz temperature trepće prilikom hlađenja dokle god je vrh i dalje vruć."
+        },
+        "ScrollingSpeed": {
+            "text2": [
+                "Brzina",
+                "poruka"
+            ],
+            "desc": "Brzina kretanja opisnih poruka poput ove. (S=sporo | B=brzo)"
+        },
+        "ReverseButtonTempChange": {
+            "text2": [
+                "Swap",
+                "+ - keys"
+            ],
+            "desc": "Reverse assignment of buttons for temperature adjustment"
+        },
+        "AnimSpeed": {
+            "text2": [
+                "Anim.",
+                "speed"
+            ],
+            "desc": "Pace of icon animations in menu (O=off | S=slow | M=medium | B=fast)"
+        },
+        "AnimLoop": {
+            "text2": [
+                "Anim.",
+                "loop"
+            ],
+            "desc": "Loop icon animations in main menu"
+        },
+        "Brightness": {
+            "text2": [
+                "Screen",
+                "brightness"
+            ],
+            "desc": "Adjust the OLED screen brightness"
+        },
+        "ColourInversion": {
+            "text2": [
+                "Invert",
+                "screen"
+            ],
+            "desc": "Invert the OLED screen colors"
+        },
+        "LOGOTime": {
+            "text2": [
+                "Boot logo",
+                "duration"
+            ],
+            "desc": "Set boot logo duration (s=seconds)"
+        },
+        "AdvancedIdle": {
+            "text2": [
+                "Detalji tokom",
+                "mirovanja"
+            ],
+            "desc": "Prikazivanje detaljnih informacija na ekranu tokom mirovanja."
+        },
+        "AdvancedSoldering": {
+            "text2": [
+                "Detalji tokom",
+                "lemljenja"
+            ],
+            "desc": "Prikazivanje detaljnih informacija na ekranu tokom lemljenja."
+        },
+        "PowerLimit": {
+            "text2": [
+                "Power",
+                "limit"
+            ],
+            "desc": "Maximum power the iron can use (W=watt)"
+        },
+        "CalibrateCJC": {
+            "text2": [
+                "Calibrate CJC",
+                "at next boot"
+            ],
+            "desc": "At next boot tip Cold Junction Compensation will be calibrated (not required if Delta T is < 5°C)"
+        },
+        "VoltageCalibration": {
+            "text2": [
+                "Kalibracija",
+                "ulaznog napona"
+            ],
+            "desc": "Kalibrisanje ulaznog napona. Podešava se na tastere; dugi pritisak za kraj."
+        },
+        "PowerPulsePower": {
+            "text2": [
+                "Power",
+                "pulse"
+            ],
+            "desc": "Intensity of power of keep-awake-pulse (W=watt)"
+        },
+        "PowerPulseWait": {
+            "text2": [
+                "Power pulse",
+                "delay"
+            ],
+            "desc": "Delay before keep-awake-pulse is triggered (x 2.5s)"
+        },
+        "PowerPulseDuration": {
+            "text2": [
+                "Power pulse",
+                "duration"
+            ],
+            "desc": "Keep-awake-pulse duration (x 250ms)"
+        },
+        "SettingsReset": {
+            "text2": [
+                "Fabričke",
+                "postavke"
+            ],
+            "desc": "Vraćanje svih postavki na fabričke vrednosti."
+        },
+        "LanguageSwitch": {
+            "text2": [
+                "Jezik:",
+                " SR      Srpski"
+            ],
+            "desc": ""
+        }
+    }
+}

Translations/translation_SV.json

@@ -1,207 +1,341 @@
-{
-  "languageCode": "SV",
-  "languageLocalName": "Svenska",
-  "fonts": ["ascii_basic", "latin_extended"],
-  "tempUnitFahrenheit": false,
-  "messages": {
-    "SettingsCalibrationWarning": "Se till att spetsen är rumstemererad innan du fortsätter!",
-    "SettingsResetWarning": "Är du säker på att du vill återställa inställningarna?",
-    "UVLOWarningString": "DC LÅG",
-    "UndervoltageString": "Underspänning",
-    "InputVoltageString": "Inspän. V: ",
-    "SleepingSimpleString": "Zzzz",
-    "SleepingAdvancedString": "Viloläge...",
-    "SleepingTipAdvancedString": "Spets:",
-    "OffString": "Av"
-  },
-  "messagesWarn": {
-    "ResetOKMessage": "Reset OK",
-    "SettingsResetMessage": ["Inställningar", "återställda"],
-    "NoAccelerometerMessage": ["Ingen", "accelerometer"],
-    "NoPowerDeliveryMessage": ["Ingen USB-PD IC", "hittades!"],
-    "LockingKeysString": "LÅST",
-    "UnlockingKeysString": "UPPLÅST",
-    "WarningKeysLockedString": "!LÅST!",
-    "WarningThermalRunaway": ["Thermal", "Runaway"]
-  },
-  "characters": {
-    "SettingRightChar": "H",
-    "SettingLeftChar": "V",
-    "SettingAutoChar": "A",
-    "SettingOffChar": "A",
-    "SettingSlowChar": "L",
-    "SettingMediumChar": "M",
-    "SettingFastChar": "S",
-    "SettingStartNoneChar": "A",
-    "SettingStartSolderingChar": "L",
-    "SettingStartSleepChar": "V",
-    "SettingStartSleepOffChar": "R",
-    "SettingSensitivityOff": "A",
-    "SettingSensitivityLow": "L",
-    "SettingSensitivityMedium": "M",
-    "SettingSensitivityHigh": "H",
-    "SettingLockDisableChar": "A",
-    "SettingLockBoostChar": "T",
-    "SettingLockFullChar": "F"
-  },
-  "menuGroups": {
-    "PowerMenu": {
-      "text2": ["Effekt-", "inställning"],
-      "desc": "Effektinställningar"
-    },
-    "SolderingMenu": {
-      "text2": ["Lödnings-", "inställning"],
-      "desc": "Lödningsinställningar"
-    },
-    "PowerSavingMenu": {
-      "text2": ["Vilo-", "läge"],
-      "desc": "Viloläges-inställningar"
-    },
-    "UIMenu": {
-      "text2": ["Användar-", "gränssnitt"],
-      "desc": "Användargränssnitts-inställningar"
-    },
-    "AdvancedMenu": {
-      "text2": ["Avancerade", "alternativ"],
-      "desc": "Avancerade alternativ"
-    }
-  },
-  "menuOptions": {
-    "DCInCutoff": {
-      "text2": ["Ström-", "källa"],
-      "desc": "Strömkälla. Anger lägsta spänning. (DC 10V) (S 3.3V per cell)"
-    },
-    "SleepTemperature": {
-      "text2": ["Vilo-", "temp"],
-      "desc": "Vilotemperatur (C)"
-    },
-    "SleepTimeout": {
-      "text2": ["Vilo-", "timeout"],
-      "desc": "Vilo-timeout (m=Minuter | s=Sekunder)"
-    },
-    "ShutdownTimeout": {
-      "text2": ["Avstängn.", "timeout"],
-      "desc": "Avstängnings-timeout (Minuter)"
-    },
-    "MotionSensitivity": {
-      "text2": ["Rörelse-", "känslighet"],
-      "desc": "Rörelsekänslighet (0=Av | 1=minst känslig | ... | 9=mest känslig)"
-    },
-    "TemperatureUnit": {
-      "text2": ["Temperatur-", "enheter"],
-      "desc": "Temperaturenhet (C=Celsius | F=Fahrenheit)"
-    },
-    "AdvancedIdle": {
-      "text2": ["Detaljerad", "vid inaktiv"],
-      "desc": "Visa detaljerad information i mindre typsnitt när inaktiv."
-    },
-    "DisplayRotation": {
-      "text2": ["Visnings", "läge"],
-      "desc": "Visningsläge (H=Högerhänt | V=Vänsterhänt | A=Automatisk)"
-    },
-    "BoostTemperature": {
-      "text2": ["Turbo-", "temp"],
-      "desc": "Temperatur i \"turbo\"-läge"
-    },
-    "AutoStart": {
-      "text2": ["Auto", "start"],
-      "desc": "Startar automatiskt lödpennan vid uppstart. (A=Av | L=Lödning | V=Viloläge | R=Viloläge Rumstemperatur)"
-    },
-    "CooldownBlink": {
-      "text2": ["Nedkylnings-", "blink"],
-      "desc": "Blinka temperaturen medan spetsen kyls av och fortfarande är varm."
-    },
-    "TemperatureCalibration": {
-      "text2": ["Kalibrera", "temperatur?"],
-      "desc": "Kalibrera spets-kompensation."
-    },
-    "SettingsReset": {
-      "text2": ["Fabriks-", "inställ?"],
-      "desc": "Återställ alla inställningar"
-    },
-    "VoltageCalibration": {
-      "text2": ["Kalibrera", "inspänning?"],
-      "desc": "Inspänningskalibrering. Knapparna justerar, håll inne för avslut"
-    },
-    "AdvancedSoldering": {
-      "text2": ["Detaljerad", "lödng.skärm"],
-      "desc": "Visa detaljerad information vid lödning"
-    },
-    "ScrollingSpeed": {
-      "text2": ["Beskrivning", "rullhast."],
-      "desc": "Hastighet som den här texten rullar i"
-    },
-    "QCMaxVoltage": {
-      "text2": ["QC", "spänning"],
-      "desc": "Maximal QC-spänning enheten skall efterfråga"
-    },
-    "PDNegTimeout": {
-      "text2": ["PD", "timeout"],
-      "desc": "PD negotiation timeout in 100ms steps for compatibility with some QC chargers (0: disabled)"
-    },
-    "PowerLimit": {
-      "text2": ["Max-", "effekt"],
-      "desc": "Maximal effekt som enheten kan använda (Watt)"
-    },
-    "ReverseButtonTempChange": {
-      "text2": ["Omvända", "+- knappar"],
-      "desc": "Omvänd ordning för temperaturjustering via plus/minus knapparna"
-    },
-    "TempChangeShortStep": {
-      "text2": ["Temp.just", "korttryck"],
-      "desc": "Temperaturjustering vid kort knapptryckning"
-    },
-    "TempChangeLongStep": {
-      "text2": ["Temp.just", "långtryck"],
-      "desc": "Temperaturjustering vid lång knapptryckning"
-    },
-    "PowerPulsePower": {
-      "text2": ["Power", "Pulse W"],
-      "desc": "Keep awake pulse power intensity"
-    },
-    "HallEffSensitivity": {
-      "text2": ["Sensor-", "känslght"],
-      "desc": "Känslighet för halleffekt-sensorn för viloläges-detektering (0=Av | 1=minst känslig | ... | 9=mest känslig)"
-    },
-    "LockingMode": {
-      "text2": ["Tillåt lås", "via knappar"],
-      "desc": "Vid lödning, håll nere bägge knappar för att slå på lås (A=Av | T=Bara turbo | F=Fullt lås)"
-    },
-    "MinVolCell": {
-      "text2": ["Minimim-", "spänning"],
-      "desc": "Minimumspänning per cell (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)"
-    },
-    "AnimLoop": {
-      "text2": ["Anim.", "loop"],
-      "desc": "Loopa animationer i huvudmeny"
-    },
-    "AnimSpeed": {
-      "text2": ["Anim.-", "hastighet"],
-      "desc": "Animationshastighet för ikoner i menyer (A=av | L=långsam | M=medel | S=snabb)"
-    },
-    "PowerPulseWait": {
-      "text2": ["Power pulse", "delay"],
-      "desc": "Delay before keep-awake-pulse is triggered (x 2.5s)"
-    },
-    "PowerPulseDuration": {
-      "text2": ["Power pulse", "duration"],
-      "desc": "Keep-awake-pulse duration (x 250ms)"
-    },
-    "LanguageSwitch": {
-      "text2": ["Språk:", " SV     Svenska"],
-      "desc": ""
-    },
-    "Brightness": {
-      "text2": ["Screen", "brightness"],
-      "desc": "Adjust the brightness of the OLED screen"
-    },
-    "ColourInversion": {
-      "text2": ["Invert", "screen"],
-      "desc": "Invert the colours of the OLED screen"
-    },
-    "LOGOTime": {
-      "text2": ["Boot logo", "duration"],
-      "desc": "Sets the duration for the boot logo (s=seconds)"
-    }
-  }
-}
+{
+    "languageCode": "SV",
+    "languageLocalName": "Svenska",
+    "tempUnitFahrenheit": false,
+    "messages": {
+        "SettingsCalibrationWarning": "Before rebooting, make sure tip & handle are at room temperature!",
+        "CJCCalibrating": "calibrating",
+        "SettingsResetWarning": "Är du säker på att du vill återställa inställningarna?",
+        "UVLOWarningString": "DC LÅG",
+        "UndervoltageString": "Underspänning",
+        "InputVoltageString": "Inspän. V: ",
+        "SleepingSimpleString": "Zzzz",
+        "SleepingAdvancedString": "Viloläge...",
+        "SleepingTipAdvancedString": "Spets:",
+        "OffString": "Av",
+        "DeviceFailedValidationWarning": "Your device is most likely a counterfeit!"
+    },
+    "messagesWarn": {
+        "CJCCalibrationDone": [
+            "Calibration",
+            "done!"
+        ],
+        "ResetOKMessage": "Reset OK",
+        "SettingsResetMessage": [
+            "Inställningar",
+            "återställda"
+        ],
+        "NoAccelerometerMessage": [
+            "Ingen",
+            "accelerometer"
+        ],
+        "NoPowerDeliveryMessage": [
+            "Ingen USB-PD IC",
+            "hittades!"
+        ],
+        "LockingKeysString": "LÅST",
+        "UnlockingKeysString": "UPPLÅST",
+        "WarningKeysLockedString": "!LÅST!",
+        "WarningThermalRunaway": [
+            "Thermal",
+            "Runaway"
+        ]
+    },
+    "characters": {
+        "SettingRightChar": "H",
+        "SettingLeftChar": "V",
+        "SettingAutoChar": "A",
+        "SettingOffChar": "A",
+        "SettingSlowChar": "L",
+        "SettingMediumChar": "M",
+        "SettingFastChar": "S",
+        "SettingStartNoneChar": "A",
+        "SettingStartSolderingChar": "L",
+        "SettingStartSleepChar": "V",
+        "SettingStartSleepOffChar": "R",
+        "SettingSensitivityOff": "A",
+        "SettingSensitivityLow": "L",
+        "SettingSensitivityMedium": "M",
+        "SettingSensitivityHigh": "H",
+        "SettingLockDisableChar": "A",
+        "SettingLockBoostChar": "T",
+        "SettingLockFullChar": "F"
+    },
+    "menuGroups": {
+        "PowerMenu": {
+            "text2": [
+                "Effekt-",
+                "inställning"
+            ],
+            "desc": ""
+        },
+        "SolderingMenu": {
+            "text2": [
+                "Lödnings-",
+                "inställning"
+            ],
+            "desc": ""
+        },
+        "PowerSavingMenu": {
+            "text2": [
+                "Vilo-",
+                "läge"
+            ],
+            "desc": ""
+        },
+        "UIMenu": {
+            "text2": [
+                "Användar-",
+                "gränssnitt"
+            ],
+            "desc": ""
+        },
+        "AdvancedMenu": {
+            "text2": [
+                "Avancerade",
+                "alternativ"
+            ],
+            "desc": ""
+        }
+    },
+    "menuOptions": {
+        "DCInCutoff": {
+            "text2": [
+                "Ström-",
+                "källa"
+            ],
+            "desc": "Strömkälla. Anger lägsta spänning. (DC 10V) (S 3.3V per cell)"
+        },
+        "MinVolCell": {
+            "text2": [
+                "Minimim-",
+                "spänning"
+            ],
+            "desc": "Minimumspänning per cell (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)"
+        },
+        "QCMaxVoltage": {
+            "text2": [
+                "QC",
+                "spänning"
+            ],
+            "desc": "Maximal QC-spänning enheten skall efterfråga"
+        },
+        "PDNegTimeout": {
+            "text2": [
+                "PD",
+                "timeout"
+            ],
+            "desc": "PD negotiation timeout in 100ms steps for compatibility with some QC chargers"
+        },
+        "BoostTemperature": {
+            "text2": [
+                "Turbo-",
+                "temp"
+            ],
+            "desc": "Temperatur i \"turbo-läge\""
+        },
+        "AutoStart": {
+            "text2": [
+                "Auto",
+                "start"
+            ],
+            "desc": "Startar automatiskt lödpennan vid uppstart. (A=Av | L=Lödning | V=Viloläge | R=Viloläge Rumstemperatur)"
+        },
+        "TempChangeShortStep": {
+            "text2": [
+                "Temp.just",
+                "korttryck"
+            ],
+            "desc": "Temperaturjustering vid kort knapptryckning"
+        },
+        "TempChangeLongStep": {
+            "text2": [
+                "Temp.just",
+                "långtryck"
+            ],
+            "desc": "Temperaturjustering vid lång knapptryckning"
+        },
+        "LockingMode": {
+            "text2": [
+                "Tillåt lås",
+                "via knappar"
+            ],
+            "desc": "Vid lödning, håll nere bägge knappar för att slå på lås (A=Av | T=Bara turbo | F=Fullt lås)"
+        },
+        "MotionSensitivity": {
+            "text2": [
+                "Rörelse-",
+                "känslighet"
+            ],
+            "desc": "Rörelsekänslighet (0=Av | 1=minst känslig | ... | 9=mest känslig)"
+        },
+        "SleepTemperature": {
+            "text2": [
+                "Vilo-",
+                "temp"
+            ],
+            "desc": "Vilotemperatur (C)"
+        },
+        "SleepTimeout": {
+            "text2": [
+                "Vilo-",
+                "timeout"
+            ],
+            "desc": "Vilo-timeout (m=Minuter | s=Sekunder)"
+        },
+        "ShutdownTimeout": {
+            "text2": [
+                "Avstängn.",
+                "timeout"
+            ],
+            "desc": "Avstängnings-timeout (Minuter)"
+        },
+        "HallEffSensitivity": {
+            "text2": [
+                "Sensor-",
+                "känslght"
+            ],
+            "desc": "Känslighet för halleffekt-sensorn för viloläges-detektering (0=Av | 1=minst känslig | ... | 9=mest känslig)"
+        },
+        "TemperatureUnit": {
+            "text2": [
+                "Temperatur-",
+                "enheter"
+            ],
+            "desc": "Temperaturenhet (C=Celsius | F=Fahrenheit)"
+        },
+        "DisplayRotation": {
+            "text2": [
+                "Visnings",
+                "läge"
+            ],
+            "desc": "Visningsläge (H=Högerhänt | V=Vänsterhänt | A=Automatisk)"
+        },
+        "CooldownBlink": {
+            "text2": [
+                "Nedkylnings-",
+                "blink"
+            ],
+            "desc": "Blinka temperaturen medan spetsen kyls av och fortfarande är varm."
+        },
+        "ScrollingSpeed": {
+            "text2": [
+                "Beskrivning",
+                "rullhast."
+            ],
+            "desc": "Hastighet som den här texten rullar i"
+        },
+        "ReverseButtonTempChange": {
+            "text2": [
+                "Omvända",
+                "+- knappar"
+            ],
+            "desc": "Omvänd ordning för temperaturjustering via plus/minus knapparna"
+        },
+        "AnimSpeed": {
+            "text2": [
+                "Anim.-",
+                "hastighet"
+            ],
+            "desc": "Animationshastighet för ikoner i menyer (A=av | L=långsam | M=medel | S=snabb)"
+        },
+        "AnimLoop": {
+            "text2": [
+                "Anim.",
+                "loop"
+            ],
+            "desc": "Loopa animationer i huvudmeny"
+        },
+        "Brightness": {
+            "text2": [
+                "Screen",
+                "brightness"
+            ],
+            "desc": "Adjust the OLED screen brightness"
+        },
+        "ColourInversion": {
+            "text2": [
+                "Invert",
+                "screen"
+            ],
+            "desc": "Invert the OLED screen colors"
+        },
+        "LOGOTime": {
+            "text2": [
+                "Boot logo",
+                "duration"
+            ],
+            "desc": "Set boot logo duration (s=seconds)"
+        },
+        "AdvancedIdle": {
+            "text2": [
+                "Detaljerad",
+                "vid inaktiv"
+            ],
+            "desc": "Visa detaljerad information i mindre typsnitt när inaktiv."
+        },
+        "AdvancedSoldering": {
+            "text2": [
+                "Detaljerad",
+                "lödng.skärm"
+            ],
+            "desc": "Visa detaljerad information vid lödning"
+        },
+        "PowerLimit": {
+            "text2": [
+                "Max-",
+                "effekt"
+            ],
+            "desc": "Maximal effekt som enheten kan använda (Watt)"
+        },
+        "CalibrateCJC": {
+            "text2": [
+                "Calibrate CJC",
+                "at next boot"
+            ],
+            "desc": "At next boot tip Cold Junction Compensation will be calibrated (not required if Delta T is < 5°C)"
+        },
+        "VoltageCalibration": {
+            "text2": [
+                "Kalibrera",
+                "inspänning?"
+            ],
+            "desc": "Inspänningskalibrering. Knapparna justerar, håll inne för avslut"
+        },
+        "PowerPulsePower": {
+            "text2": [
+                "Power",
+                "pulse"
+            ],
+            "desc": "Intensity of power of keep-awake-pulse (W=watt)"
+        },
+        "PowerPulseWait": {
+            "text2": [
+                "Power pulse",
+                "delay"
+            ],
+            "desc": "Delay before keep-awake-pulse is triggered (x 2.5s)"
+        },
+        "PowerPulseDuration": {
+            "text2": [
+                "Power pulse",
+                "duration"
+            ],
+            "desc": "Keep-awake-pulse duration (x 250ms)"
+        },
+        "SettingsReset": {
+            "text2": [
+                "Fabriks-",
+                "inställ?"
+            ],
+            "desc": "Återställ alla inställningar"
+        },
+        "LanguageSwitch": {
+            "text2": [
+                "Språk:",
+                " SV     Svenska"
+            ],
+            "desc": ""
+        }
+    }
+}

Translations/translation_TR.json

@@ -1,207 +1,341 @@
-{
-  "languageCode": "TR",
-  "languageLocalName": "Türkçe",
-  "fonts": ["ascii_basic", "latin_extended"],
-  "tempUnitFahrenheit": false,
-  "messages": {
-    "SettingsCalibrationWarning": "Lütfen devam etmeden önce ucun oda sıcaklığında olduğunu garantiye alın!",
-    "SettingsResetWarning": "Ayarları varsayılan değerlere sıfırlamak istediğinizden emin misiniz?",
-    "UVLOWarningString": "Güç Az",
-    "UndervoltageString": "Düşük Voltaj",
-    "InputVoltageString": "Giriş V: ",
-    "SleepingSimpleString": "Zzzz",
-    "SleepingAdvancedString": "Bekleme Modu ...",
-    "SleepingTipAdvancedString": "Uç:",
-    "OffString": "Kapalı"
-  },
-  "messagesWarn": {
-    "ResetOKMessage": ["Sıfırlama Tamam", ""],
-    "SettingsResetMessage": ["Ayarlar", "Sıfırlandı"],
-    "NoAccelerometerMessage": ["No accelerometer", "detected!"],
-    "NoPowerDeliveryMessage": ["No USB-PD IC", "detected!"],
-    "LockingKeysString": "LOCKED",
-    "UnlockingKeysString": "UNLOCKED",
-    "WarningKeysLockedString": "!LOCKED!",
-    "WarningThermalRunaway": ["Thermal", "Runaway"]
-  },
-  "characters": {
-    "SettingRightChar": "R",
-    "SettingLeftChar": "L",
-    "SettingAutoChar": "O",
-    "SettingOffChar": "K",
-    "SettingSlowChar": "Y",
-    "SettingMediumChar": "O",
-    "SettingFastChar": "H",
-    "SettingStartNoneChar": "K",
-    "SettingStartSolderingChar": "L",
-    "SettingStartSleepChar": "U",
-    "SettingStartSleepOffChar": "S",
-    "SettingSensitivityOff": "K",
-    "SettingSensitivityLow": "L",
-    "SettingSensitivityMedium": "O",
-    "SettingSensitivityHigh": "H",
-    "SettingLockDisableChar": "K",
-    "SettingLockBoostChar": "B",
-    "SettingLockFullChar": "F"
-  },
-  "menuGroups": {
-    "PowerMenu": {
-      "text2": ["Power", "settings"],
-      "desc": "Power settings"
-    },
-    "SolderingMenu": {
-      "text2": ["Lehimleme", "Ayarları"],
-      "desc": "Lehimleme Ayarları"
-    },
-    "PowerSavingMenu": {
-      "text2": ["Uyku", "Modları"],
-      "desc": "Güç Tasarrufu Ayarları"
-    },
-    "UIMenu": {
-      "text2": ["Kullanıcı", "Arayüzü"],
-      "desc": "Kullanıcı Arayüzü Ayarları"
-    },
-    "AdvancedMenu": {
-      "text2": ["Gelişmiş", "Ayarlar"],
-      "desc": "Gelişmiş Ayarlar"
-    }
-  },
-  "menuOptions": {
-    "DCInCutoff": {
-      "text2": ["GÇKYN", ""],
-      "desc": "\"Güç Kaynağı\". En düşük çalışma voltajını ayarlar. (DC 10V) (S 3.3V hücre başına)"
-    },
-    "SleepTemperature": {
-      "text2": ["BKSC", ""],
-      "desc": "Bekleme Modu Sıcaklığı (C)"
-    },
-    "SleepTimeout": {
-      "text2": ["BMZA", ""],
-      "desc": "Bekleme Modu Zaman Aşımı (Dakika | Saniye)"
-    },
-    "ShutdownTimeout": {
-      "text2": ["KPTZA", ""],
-      "desc": "Kapatma Zaman Aşımı (Dakika)"
-    },
-    "MotionSensitivity": {
-      "text2": ["HARHAS", ""],
-      "desc": "Hareket Hassasiyeti (0=Kapalı | 1=En az duyarlı | ... | 9=En duyarlı)"
-    },
-    "TemperatureUnit": {
-      "text2": ["SCKBRM", ""],
-      "desc": "Sıcaklık Birimi (C=Celsius | F=Fahrenheit)"
-    },
-    "AdvancedIdle": {
-      "text2": ["AYRBİL", ""],
-      "desc": "Boş ekranda ayrıntılı bilgileri daha küçük bir yazı tipi ile göster."
-    },
-    "DisplayRotation": {
-      "text2": ["GRNYÖN", ""],
-      "desc": "Görüntü Yönlendirme (R=Sağlak | L=Solak | O=Otomatik)"
-    },
-    "BoostTemperature": {
-      "text2": ["YKSC", ""],
-      "desc": "Yüksek Performans Modu Sıcaklığı"
-    },
-    "AutoStart": {
-      "text2": ["OTOBAŞ", ""],
-      "desc": "Güç verildiğinde otomatik olarak lehimleme modunda başlat. (K=Kapalı | L=Lehimleme Modu | U=Uyku Modu | S=Uyku Modu Oda Sıcaklığı)"
-    },
-    "CooldownBlink": {
-      "text2": ["SĞGÖST", ""],
-      "desc": "Soğutma ekranında uç hala sıcakken derece gösterilsin."
-    },
-    "TemperatureCalibration": {
-      "text2": ["SCK KAL?", ""],
-      "desc": "Ucu kalibre et."
-    },
-    "SettingsReset": {
-      "text2": ["SIFIRLA?", ""],
-      "desc": "Bütün ayarları sıfırlar"
-    },
-    "VoltageCalibration": {
-      "text2": ["VOL KAL?", ""],
-      "desc": "Voltaj Girişi Kalibrasyonu. Düğmeler ayarlar, çıkmak için uzun bas."
-    },
-    "AdvancedSoldering": {
-      "text2": ["GELLHM", ""],
-      "desc": "\"Gelişmiş Lehimleme\" Lehimleme yaparken detaylı bilgi göster"
-    },
-    "ScrollingSpeed": {
-      "text2": ["YZKYHZ", ""],
-      "desc": "Bu yazının kayma hızı (Y=Yavaş | H=Hızlı)"
-    },
-    "QCMaxVoltage": {
-      "text2": ["QC", "voltage"],
-      "desc": "Max QC voltage the iron should negotiate for"
-    },
-    "PDNegTimeout": {
-      "text2": ["PD", "timeout"],
-      "desc": "PD negotiation timeout in 100ms steps for compatibility with some QC chargers"
-    },
-    "PowerLimit": {
-      "text2": ["Power", "limit"],
-      "desc": "Havyanın kullanacağı en yüksek güç (Watts)"
-    },
-    "ReverseButtonTempChange": {
-      "text2": ["Swap", "+ - keys"],
-      "desc": "\"Düğme Yerleri Rotasyonu\" Sıcaklık ayar düğmelerinin yerini değiştirin"
-    },
-    "TempChangeShortStep": {
-      "text2": ["Temp change", "short"],
-      "desc": "Kısa basışlardaki sıcaklık derecesi atlama oranı"
-    },
-    "TempChangeLongStep": {
-      "text2": ["Temp change", "long"],
-      "desc": "Uzun başışlardaki sıcaklık derecesi atlama oranı"
-    },
-    "PowerPulsePower": {
-      "text2": ["Power", "pulse"],
-      "desc": "Güç girişi voltajı ölçüm yoğunluğunu sık tut."
-    },
-    "HallEffSensitivity": {
-      "text2": ["Hall sensor", "sensitivity"],
-      "desc": "Sensitivity of the Hall effect sensor to detect sleep (0=Kapalı | 1=En az duyarlı | ... | 9=En duyarlı)"
-    },
-    "LockingMode": {
-      "text2": ["Allow locking", "buttons"],
-      "desc": "While soldering, hold down both buttons to toggle locking them (K=Kapalı | B=boost mode only | F=full locking)"
-    },
-    "MinVolCell": {
-      "text2": ["Minimum", "voltage"],
-      "desc": "Minimum allowed voltage per cell (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)"
-    },
-    "AnimLoop": {
-      "text2": ["Anim.", "loop"],
-      "desc": "Loop icon animations in main menu"
-    },
-    "AnimSpeed": {
-      "text2": ["Anim.", "speed"],
-      "desc": "Pace of icon animations in menu (K=Kapalı | Y=Yavaş | O=Orta | H=Hızlı)"
-    },
-    "PowerPulseWait": {
-      "text2": ["Power pulse", "delay"],
-      "desc": "Delay before keep-awake-pulse is triggered (x 2.5s)"
-    },
-    "PowerPulseDuration": {
-      "text2": ["Power pulse", "duration"],
-      "desc": "Keep-awake-pulse duration (x 250ms)"
-    },
-    "LanguageSwitch": {
-      "text2": ["Dil:", " TR      Türkçe"],
-      "desc": ""
-    },
-    "Brightness": {
-      "text2": ["Screen", "brightness"],
-      "desc": "Adjust the brightness of the OLED screen"
-    },
-    "ColourInversion": {
-      "text2": ["Invert", "screen"],
-      "desc": "Invert the colours of the OLED screen"
-    },
-    "LOGOTime": {
-      "text2": ["Boot logo", "duration"],
-      "desc": "Sets the duration for the boot logo (s=seconds)"
-    }
-  }
-}
+{
+    "languageCode": "TR",
+    "languageLocalName": "Türkçe",
+    "tempUnitFahrenheit": false,
+    "messages": {
+        "SettingsCalibrationWarning": "Before rebooting, make sure tip & handle are at room temperature!",
+        "CJCCalibrating": "calibrating",
+        "SettingsResetWarning": "Ayarları varsayılan değerlere sıfırlamak istediğinizden emin misiniz?",
+        "UVLOWarningString": "Güç Az",
+        "UndervoltageString": "Düşük Voltaj",
+        "InputVoltageString": "Giriş V: ",
+        "SleepingSimpleString": "Zzzz",
+        "SleepingAdvancedString": "Bekleme Modu ...",
+        "SleepingTipAdvancedString": "Uç:",
+        "OffString": "Kapalı",
+        "DeviceFailedValidationWarning": "Your device is most likely a counterfeit!"
+    },
+    "messagesWarn": {
+        "CJCCalibrationDone": [
+            "Calibration",
+            "done!"
+        ],
+        "ResetOKMessage": "Sıfırlama Tamam",
+        "SettingsResetMessage": [
+            "Ayarlar",
+            "Sıfırlandı"
+        ],
+        "NoAccelerometerMessage": [
+            "No accelerometer",
+            "detected!"
+        ],
+        "NoPowerDeliveryMessage": [
+            "No USB-PD IC",
+            "detected!"
+        ],
+        "LockingKeysString": "LOCKED",
+        "UnlockingKeysString": "UNLOCKED",
+        "WarningKeysLockedString": "!LOCKED!",
+        "WarningThermalRunaway": [
+            "Thermal",
+            "Runaway"
+        ]
+    },
+    "characters": {
+        "SettingRightChar": "R",
+        "SettingLeftChar": "L",
+        "SettingAutoChar": "O",
+        "SettingOffChar": "K",
+        "SettingSlowChar": "Y",
+        "SettingMediumChar": "O",
+        "SettingFastChar": "H",
+        "SettingStartNoneChar": "K",
+        "SettingStartSolderingChar": "L",
+        "SettingStartSleepChar": "U",
+        "SettingStartSleepOffChar": "S",
+        "SettingSensitivityOff": "K",
+        "SettingSensitivityLow": "L",
+        "SettingSensitivityMedium": "O",
+        "SettingSensitivityHigh": "H",
+        "SettingLockDisableChar": "K",
+        "SettingLockBoostChar": "B",
+        "SettingLockFullChar": "F"
+    },
+    "menuGroups": {
+        "PowerMenu": {
+            "text2": [
+                "Power",
+                "settings"
+            ],
+            "desc": ""
+        },
+        "SolderingMenu": {
+            "text2": [
+                "Lehimleme",
+                "Ayarları"
+            ],
+            "desc": ""
+        },
+        "PowerSavingMenu": {
+            "text2": [
+                "Uyku",
+                "Modları"
+            ],
+            "desc": ""
+        },
+        "UIMenu": {
+            "text2": [
+                "Kullanıcı",
+                "Arayüzü"
+            ],
+            "desc": ""
+        },
+        "AdvancedMenu": {
+            "text2": [
+                "Gelişmiş",
+                "Ayarlar"
+            ],
+            "desc": ""
+        }
+    },
+    "menuOptions": {
+        "DCInCutoff": {
+            "text2": [
+                "GÇKYN",
+                ""
+            ],
+            "desc": "\"Güç Kaynağı\". En düşük çalışma voltajını ayarlar. (DC 10V) (S 3.3V hücre başına)"
+        },
+        "MinVolCell": {
+            "text2": [
+                "Minimum",
+                "voltage"
+            ],
+            "desc": "Minimum allowed voltage per battery cell (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)"
+        },
+        "QCMaxVoltage": {
+            "text2": [
+                "QC",
+                "voltage"
+            ],
+            "desc": "Max QC voltage the iron should negotiate for"
+        },
+        "PDNegTimeout": {
+            "text2": [
+                "PD",
+                "timeout"
+            ],
+            "desc": "PD negotiation timeout in 100ms steps for compatibility with some QC chargers"
+        },
+        "BoostTemperature": {
+            "text2": [
+                "YKSC",
+                ""
+            ],
+            "desc": "Yüksek Performans Modu Sıcaklığı"
+        },
+        "AutoStart": {
+            "text2": [
+                "OTOBAŞ",
+                ""
+            ],
+            "desc": "Güç verildiğinde otomatik olarak lehimleme modunda başlat. (K=Kapalı | L=Lehimleme Modu | U=Uyku Modu | S=Uyku Modu Oda Sıcaklığı)"
+        },
+        "TempChangeShortStep": {
+            "text2": [
+                "Temp change",
+                "short"
+            ],
+            "desc": "Kısa basışlardaki sıcaklık derecesi atlama oranı"
+        },
+        "TempChangeLongStep": {
+            "text2": [
+                "Temp change",
+                "long"
+            ],
+            "desc": "Uzun başışlardaki sıcaklık derecesi atlama oranı"
+        },
+        "LockingMode": {
+            "text2": [
+                "Allow locking",
+                "buttons"
+            ],
+            "desc": "While soldering, hold down both buttons to toggle locking them (K=Kapalı | B=boost mode only | F=full locking)"
+        },
+        "MotionSensitivity": {
+            "text2": [
+                "HARHAS",
+                ""
+            ],
+            "desc": "Hareket Hassasiyeti (0=Kapalı | 1=En az duyarlı | ... | 9=En duyarlı)"
+        },
+        "SleepTemperature": {
+            "text2": [
+                "BKSC",
+                ""
+            ],
+            "desc": "Bekleme Modu Sıcaklığı (C)"
+        },
+        "SleepTimeout": {
+            "text2": [
+                "BMZA",
+                ""
+            ],
+            "desc": "Bekleme Modu Zaman Aşımı (Dakika | Saniye)"
+        },
+        "ShutdownTimeout": {
+            "text2": [
+                "KPTZA",
+                ""
+            ],
+            "desc": "Kapatma Zaman Aşımı (Dakika)"
+        },
+        "HallEffSensitivity": {
+            "text2": [
+                "Hall sensor",
+                "sensitivity"
+            ],
+            "desc": "Sensitivity to magnets (0=Kapalı | 1=En az duyarlı | ... | 9=En duyarlı)"
+        },
+        "TemperatureUnit": {
+            "text2": [
+                "SCKBRM",
+                ""
+            ],
+            "desc": "Sıcaklık Birimi (C=Celsius | F=Fahrenheit)"
+        },
+        "DisplayRotation": {
+            "text2": [
+                "GRNYÖN",
+                ""
+            ],
+            "desc": "Görüntü Yönlendirme (R=Sağlak | L=Solak | O=Otomatik)"
+        },
+        "CooldownBlink": {
+            "text2": [
+                "SĞGÖST",
+                ""
+            ],
+            "desc": "Soğutma ekranında uç hala sıcakken derece gösterilsin."
+        },
+        "ScrollingSpeed": {
+            "text2": [
+                "YZKYHZ",
+                ""
+            ],
+            "desc": "Bu yazının kayma hızı (Y=Yavaş | H=Hızlı)"
+        },
+        "ReverseButtonTempChange": {
+            "text2": [
+                "Swap",
+                "+ - keys"
+            ],
+            "desc": "\"Düğme Yerleri Rotasyonu\" Sıcaklık ayar düğmelerinin yerini değiştirin"
+        },
+        "AnimSpeed": {
+            "text2": [
+                "Anim.",
+                "speed"
+            ],
+            "desc": "Pace of icon animations in menu (K=Kapalı | Y=Yavaş | O=Orta | H=Hızlı)"
+        },
+        "AnimLoop": {
+            "text2": [
+                "Anim.",
+                "loop"
+            ],
+            "desc": "Loop icon animations in main menu"
+        },
+        "Brightness": {
+            "text2": [
+                "Screen",
+                "brightness"
+            ],
+            "desc": "Adjust the OLED screen brightness"
+        },
+        "ColourInversion": {
+            "text2": [
+                "Invert",
+                "screen"
+            ],
+            "desc": "Invert the OLED screen colors"
+        },
+        "LOGOTime": {
+            "text2": [
+                "Boot logo",
+                "duration"
+            ],
+            "desc": "Set boot logo duration (s=seconds)"
+        },
+        "AdvancedIdle": {
+            "text2": [
+                "AYRBİL",
+                ""
+            ],
+            "desc": "Boş ekranda ayrıntılı bilgileri daha küçük bir yazı tipi ile göster."
+        },
+        "AdvancedSoldering": {
+            "text2": [
+                "GELLHM",
+                ""
+            ],
+            "desc": "\"Gelişmiş Lehimleme\" Lehimleme yaparken detaylı bilgi göster"
+        },
+        "PowerLimit": {
+            "text2": [
+                "Power",
+                "limit"
+            ],
+            "desc": "Havyanın kullanacağı en yüksek güç (W=Watts)"
+        },
+        "CalibrateCJC": {
+            "text2": [
+                "Calibrate CJC",
+                "at next boot"
+            ],
+            "desc": "At next boot tip Cold Junction Compensation will be calibrated (not required if Delta T is < 5°C)"
+        },
+        "VoltageCalibration": {
+            "text2": [
+                "VOL KAL?",
+                ""
+            ],
+            "desc": "Voltaj Girişi Kalibrasyonu. Düğmeler ayarlar, çıkmak için uzun bas."
+        },
+        "PowerPulsePower": {
+            "text2": [
+                "Power",
+                "pulse"
+            ],
+            "desc": "Güç girişi voltajı ölçüm yoğunluğunu sık tut."
+        },
+        "PowerPulseWait": {
+            "text2": [
+                "Power pulse",
+                "delay"
+            ],
+            "desc": "Delay before keep-awake-pulse is triggered (x 2.5s)"
+        },
+        "PowerPulseDuration": {
+            "text2": [
+                "Power pulse",
+                "duration"
+            ],
+            "desc": "Keep-awake-pulse duration (x 250ms)"
+        },
+        "SettingsReset": {
+            "text2": [
+                "SIFIRLA?",
+                ""
+            ],
+            "desc": "Bütün ayarları sıfırlar"
+        },
+        "LanguageSwitch": {
+            "text2": [
+                "Dil:",
+                " TR      Türkçe"
+            ],
+            "desc": ""
+        }
+    }
+}

Translations/translation_UK.json

@@ -1,207 +1,341 @@
-{
-  "languageCode": "UK",
-  "languageLocalName": "Українська",
-  "fonts": ["ascii_basic", "latin_extended", "cyrillic"],
-  "tempUnitFahrenheit": false,
-  "messages": {
-    "SettingsCalibrationWarning": "Переконайтеся, що жало охололо до кімнатної температури, перш ніж продовжувати!",
-    "SettingsResetWarning": "Ви дійсно хочете скинути налаштування до значень за замовчуванням? (A=Так, В=Ні)",
-    "UVLOWarningString": "АККУМ--",
-    "UndervoltageString": "Низька напруга",
-    "InputVoltageString": "Жив.(B): ",
-    "SleepingSimpleString": "ZzZzz",
-    "SleepingAdvancedString": "Очікування...",
-    "SleepingTipAdvancedString": "Жало:",
-    "OffString": "Вимк"
-  },
-  "messagesWarn": {
-    "ResetOKMessage": "Скид. OK",
-    "SettingsResetMessage": ["Налаштування", "скинуті!"],
-    "NoAccelerometerMessage": ["Акселерометр", "не виявлено!"],
-    "NoPowerDeliveryMessage": ["USB-PD IC", "не виявлено!"],
-    "LockingKeysString": "ЗАБЛОК.",
-    "UnlockingKeysString": "РОЗБЛОК.",
-    "WarningKeysLockedString": "!ЗАБЛОК!",
-    "WarningThermalRunaway": ["Thermal", "Runaway"]
-  },
-  "characters": {
-    "SettingRightChar": "П",
-    "SettingLeftChar": "Л",
-    "SettingAutoChar": "A",
-    "SettingOffChar": "B",
-    "SettingSlowChar": "Н",
-    "SettingMediumChar": "M",
-    "SettingFastChar": "М",
-    "SettingStartNoneChar": "В",
-    "SettingStartSolderingChar": "П",
-    "SettingStartSleepChar": "О",
-    "SettingStartSleepOffChar": "К",
-    "SettingSensitivityOff": "В",
-    "SettingSensitivityLow": "Н",
-    "SettingSensitivityMedium": "С",
-    "SettingSensitivityHigh": "М",
-    "SettingLockDisableChar": "В",
-    "SettingLockBoostChar": "Т",
-    "SettingLockFullChar": "П"
-  },
-  "menuGroups": {
-    "PowerMenu": {
-      "text2": ["Параметри", "живлення"],
-      "desc": "Джерело живлення, та мінамільна напруга на комірку"
-    },
-    "SolderingMenu": {
-      "text2": ["Параметри", "пайки"],
-      "desc": "Налаштування для режиму пайки. Діють при увімкненому жалі."
-    },
-    "PowerSavingMenu": {
-      "text2": ["Режим", "сну"],
-      "desc": "Налаштування при бездіяльності. Корисно що б не обпектися і з часом не спалити житло."
-    },
-    "UIMenu": {
-      "text2": ["Параметри", "інтерфейсу"],
-      "desc": "Параметри користувальницького інтерфейсу."
-    },
-    "AdvancedMenu": {
-      "text2": ["Додаткові", "параметри"],
-      "desc": "Розширені налаштування. Додаткові зручності."
-    }
-  },
-  "menuOptions": {
-    "DCInCutoff": {
-      "text2": ["Джерело", "живлення"],
-      "desc": "Встановлює напругу відсічки. (DC - 10V) (3S - 9.9V | 4S - 13.2V | 5S - 16.5V | 6S - 19.8V)"
-    },
-    "SleepTemperature": {
-      "text2": ["Темпер.", "сну"],
-      "desc": "Температура режиму очікування (C° | F°)"
-    },
-    "SleepTimeout": {
-      "text2": ["Тайм-аут", "сну"],
-      "desc": "Час до переходу в режим очікування (Хвилини | Секунди)"
-    },
-    "ShutdownTimeout": {
-      "text2": ["Часу до", "вимкнення"],
-      "desc": "Час до вимкнення (Хвилини)"
-    },
-    "MotionSensitivity": {
-      "text2": ["Чутливість", "сенсору руху"],
-      "desc": "Акселерометр (0=Вимк. | 1=мін. чутливості | ... | 9=макс. чутливості)"
-    },
-    "TemperatureUnit": {
-      "text2": ["Формат темпе-", "ратури(C°/F°)"],
-      "desc": "Одиниця виміру температури (C=Цельсій | F=Фаренгейт)"
-    },
-    "AdvancedIdle": {
-      "text2": ["Детальний ре-", "жим очікуван."],
-      "desc": "Показувати детальну інформацію маленьким шрифтом на домашньому екрані"
-    },
-    "DisplayRotation": {
-      "text2": ["Автоповорот", "екрану"],
-      "desc": "Орієнтація дисплея (П=Правша | Л=Лівша | A=Автоповорот)"
-    },
-    "BoostTemperature": {
-      "text2": ["Темпер.", "Турбо"],
-      "desc": "Температура в \"Турбо\" режимі"
-    },
-    "AutoStart": {
-      "text2": ["Гарячий", "старт"],
-      "desc": "Режим в якому запускається паяльник при ввімкненні (В=Вимк. | П=Пайка | О=Очікування | К=Очікування при кімн. темп.)"
-    },
-    "CooldownBlink": {
-      "text2": ["Показ t° при", "охолодженні"],
-      "desc": "Показувати температуру на екрані охолодження, поки жало залишається гарячим, при цьому екран моргає"
-    },
-    "TemperatureCalibration": {
-      "text2": ["Калібрування", "температури"],
-      "desc": "Калібрування температурного датчика."
-    },
-    "SettingsReset": {
-      "text2": ["Скинути всі", "налаштування?"],
-      "desc": "Скидання всіх параметрів до стандартних значень."
-    },
-    "VoltageCalibration": {
-      "text2": ["Калібрування", "напруги"],
-      "desc": "Калібрування напруги входу. Налаштувати кнопками, натиснути і утримати щоб завершити."
-    },
-    "AdvancedSoldering": {
-      "text2": ["Детальний", "режим пайки"],
-      "desc": "Показувати детальну інформацію при пайці."
-    },
-    "ScrollingSpeed": {
-      "text2": ["Швидкість", "тексту"],
-      "desc": "Швидкість прокрутки тексту (П=повільно | Ш=швидко)"
-    },
-    "QCMaxVoltage": {
-      "text2": ["Потужність", "дж. живлення"],
-      "desc": "Потужність джерела живлення в Ватах"
-    },
-    "PDNegTimeout": {
-      "text2": ["PD", "timeout"],
-      "desc": "PD negotiation timeout in 100ms steps for compatibility with some QC chargers (0: disabled)"
-    },
-    "PowerLimit": {
-      "text2": ["Макс.", "потуж."],
-      "desc": "Макс. потужність, яку може використовувати паяльник (Ват)"
-    },
-    "ReverseButtonTempChange": {
-      "text2": ["Інвертувати", "кнопки +-?"],
-      "desc": "Інвертувати кнопки зміни температури."
-    },
-    "TempChangeShortStep": {
-      "text2": ["Зміна темп.", "коротко?"],
-      "desc": "Змінювати температуру при короткому натисканні!"
-    },
-    "TempChangeLongStep": {
-      "text2": ["Зміна темп.", "довго?"],
-      "desc": "Змінювати температуру при довгому натисканні!"
-    },
-    "PowerPulsePower": {
-      "text2": ["Пульс.", "Навантаж."],
-      "desc": "Деякі PowerBank-и з часом вимк. живлення, якщо пристрій споживає дуже мало енергії)"
-    },
-    "HallEffSensitivity": {
-      "text2": ["Чутливість", "Ефекту Холла"],
-      "desc": "Чутливість датчика ефекту Холла при виявленні сну (0=Вимк. | 1=мін. чутливості | ... | 9=макс. чутливості)"
-    },
-    "LockingMode": {
-      "text2": ["Дозволити", "блок. кнопок"],
-      "desc": "Під час пайки тривале натискання обох кнопок заблокує їх (В=Вимк | Т=Тільки турбо | П=Повне)"
-    },
-    "MinVolCell": {
-      "text2": ["Мін.", "напруга"],
-      "desc": "Мінімальна дозволена напруга на комірку (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)"
-    },
-    "AnimLoop": {
-      "text2": ["Зациклена", "анімація"],
-      "desc": "Зациклена анімація іконок в головному меню"
-    },
-    "AnimSpeed": {
-      "text2": ["Швидкість", "анімації"],
-      "desc": "Швидкість анімації іконок у головному меню (Мілісекунди) (В=Вимк | Н=Низькa | С=Середня | М=Макс)"
-    },
-    "PowerPulseWait": {
-      "text2": ["Час між імп.", "напруги"],
-      "desc": "Час між імпульсами напруги яка не дає PowerBank-у заснути (x 2.5с)"
-    },
-    "PowerPulseDuration": {
-      "text2": ["Тривалість", "імп. напруги"],
-      "desc": "Тривалість імпульсу напруги яка не дає PowerBank-у заснути (x 250мс)"
-    },
-    "LanguageSwitch": {
-      "text2": ["Мова:", " UK  Українська"],
-      "desc": ""
-    },
-    "Brightness": {
-      "text2": ["Яскравість", "екрану"],
-      "desc": "Налаштування контрасту/яскравості OLED екрану"
-    },
-    "ColourInversion": {
-      "text2": ["Інверт", "екрану"],
-      "desc": "Налаштування контрасту/яскравості OLED екрану"
-    },
-    "LOGOTime": {
-      "text2": ["Boot logo", "duration"],
-      "desc": "Sets the duration for the boot logo (s=seconds)"
-    }
-  }
-}
+{
+    "languageCode": "UK",
+    "languageLocalName": "Українська",
+    "tempUnitFahrenheit": false,
+    "messages": {
+        "SettingsCalibrationWarning": "Під час наступного завантаження переконайтеся, що жало і ручка мають кімнатну температуру!",
+        "CJCCalibrating": "калібрування",
+        "SettingsResetWarning": "Ви дійсно хочете скинути налаштування до значень за замовчуванням? (A=Так, В=Ні)",
+        "UVLOWarningString": "АККУМ--",
+        "UndervoltageString": "Низька напруга",
+        "InputVoltageString": "Жив.(B): ",
+        "SleepingSimpleString": "ZzZzz",
+        "SleepingAdvancedString": "Очікування...",
+        "SleepingTipAdvancedString": "Жало:",
+        "OffString": "Вимк",
+        "DeviceFailedValidationWarning": "Вірогідно ваш пристрій підробний!"
+    },
+    "messagesWarn": {
+        "CJCCalibrationDone": [
+            "КХС",
+            "відкалібровано!"
+        ],
+        "ResetOKMessage": "Скид. OK",
+        "SettingsResetMessage": [
+            "Налаштування",
+            "скинуті!"
+        ],
+        "NoAccelerometerMessage": [
+            "Акселерометр",
+            "не виявлено!"
+        ],
+        "NoPowerDeliveryMessage": [
+            "USB-PD IC",
+            "не виявлено!"
+        ],
+        "LockingKeysString": "ЗАБЛОК.",
+        "UnlockingKeysString": "РОЗБЛОК.",
+        "WarningKeysLockedString": "!ЗАБЛОК!",
+        "WarningThermalRunaway": [
+            "Некерований",
+            "розігрів"
+        ]
+    },
+    "characters": {
+        "SettingRightChar": "П",
+        "SettingLeftChar": "Л",
+        "SettingAutoChar": "A",
+        "SettingOffChar": "B",
+        "SettingSlowChar": "Н",
+        "SettingMediumChar": "M",
+        "SettingFastChar": "М",
+        "SettingStartNoneChar": "В",
+        "SettingStartSolderingChar": "П",
+        "SettingStartSleepChar": "О",
+        "SettingStartSleepOffChar": "К",
+        "SettingSensitivityOff": "В",
+        "SettingSensitivityLow": "Н",
+        "SettingSensitivityMedium": "С",
+        "SettingSensitivityHigh": "М",
+        "SettingLockDisableChar": "В",
+        "SettingLockBoostChar": "Т",
+        "SettingLockFullChar": "П"
+    },
+    "menuGroups": {
+        "PowerMenu": {
+            "text2": [
+                "Параметри",
+                "живлення"
+            ],
+            "desc": ""
+        },
+        "SolderingMenu": {
+            "text2": [
+                "Параметри",
+                "пайки"
+            ],
+            "desc": ""
+        },
+        "PowerSavingMenu": {
+            "text2": [
+                "Режим",
+                "сну"
+            ],
+            "desc": ""
+        },
+        "UIMenu": {
+            "text2": [
+                "Параметри",
+                "інтерфейсу"
+            ],
+            "desc": ""
+        },
+        "AdvancedMenu": {
+            "text2": [
+                "Додаткові",
+                "параметри"
+            ],
+            "desc": ""
+        }
+    },
+    "menuOptions": {
+        "DCInCutoff": {
+            "text2": [
+                "Джерело",
+                "живлення"
+            ],
+            "desc": "Встановлює напругу відсічки. (DC - 10V) (3S - 9.9V | 4S - 13.2V | 5S - 16.5V | 6S - 19.8V)"
+        },
+        "MinVolCell": {
+            "text2": [
+                "Мін.",
+                "напруга"
+            ],
+            "desc": "Мінімальна дозволена напруга на комірку (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)"
+        },
+        "QCMaxVoltage": {
+            "text2": [
+                "Потужність",
+                "дж. живлення"
+            ],
+            "desc": "Потужність джерела живлення в Ватах"
+        },
+        "PDNegTimeout": {
+            "text2": [
+                "PD",
+                "затримка"
+            ],
+            "desc": "Затримка у 100мс інкрементах для PD для сумісності з деякими QC зарядними пристроями (0: вимкнено)"
+        },
+        "BoostTemperature": {
+            "text2": [
+                "Темпер.",
+                "Турбо"
+            ],
+            "desc": "Температура в \"Турбо\" режимі"
+        },
+        "AutoStart": {
+            "text2": [
+                "Гарячий",
+                "старт"
+            ],
+            "desc": "Режим в якому запускається паяльник при ввімкненні (В=Вимк. | П=Пайка | О=Очікування | К=Очікування при кімн. темп.)"
+        },
+        "TempChangeShortStep": {
+            "text2": [
+                "Зміна темп.",
+                "коротко?"
+            ],
+            "desc": "Змінювати температуру при короткому натисканні!"
+        },
+        "TempChangeLongStep": {
+            "text2": [
+                "Зміна темп.",
+                "довго?"
+            ],
+            "desc": "Змінювати температуру при довгому натисканні!"
+        },
+        "LockingMode": {
+            "text2": [
+                "Дозволити",
+                "блок. кнопок"
+            ],
+            "desc": "Під час пайки тривале натискання обох кнопок заблокує їх (В=Вимк | Т=Тільки турбо | П=Повне)"
+        },
+        "MotionSensitivity": {
+            "text2": [
+                "Чутливість",
+                "сенсору руху"
+            ],
+            "desc": "Акселерометр (0=Вимк. | 1=мін. чутливості | ... | 9=макс. чутливості)"
+        },
+        "SleepTemperature": {
+            "text2": [
+                "Темпер.",
+                "сну"
+            ],
+            "desc": "Температура режиму очікування (C° | F°)"
+        },
+        "SleepTimeout": {
+            "text2": [
+                "Тайм-аут",
+                "сну"
+            ],
+            "desc": "Час до переходу в режим очікування (Хвилини | Секунди)"
+        },
+        "ShutdownTimeout": {
+            "text2": [
+                "Часу до",
+                "вимкнення"
+            ],
+            "desc": "Час до вимкнення (Хвилини)"
+        },
+        "HallEffSensitivity": {
+            "text2": [
+                "Чутливість",
+                "Ефекту Холла"
+            ],
+            "desc": "Чутливість датчика ефекту Холла при виявленні сну (0=Вимк. | 1=мін. чутливості | ... | 9=макс. чутливості)"
+        },
+        "TemperatureUnit": {
+            "text2": [
+                "Формат темпе-",
+                "ратури(C°/F°)"
+            ],
+            "desc": "Одиниця виміру температури (C=Цельсій | F=Фаренгейт)"
+        },
+        "DisplayRotation": {
+            "text2": [
+                "Автоповорот",
+                "екрану"
+            ],
+            "desc": "Орієнтація дисплея (П=Правша | Л=Лівша | A=Автоповорот)"
+        },
+        "CooldownBlink": {
+            "text2": [
+                "Показ t° при",
+                "охолодженні"
+            ],
+            "desc": "Показувати температуру на екрані охолодження, поки жало залишається гарячим, при цьому екран моргає"
+        },
+        "ScrollingSpeed": {
+            "text2": [
+                "Швидкість",
+                "тексту"
+            ],
+            "desc": "Швидкість прокрутки тексту (П=повільно | Ш=швидко)"
+        },
+        "ReverseButtonTempChange": {
+            "text2": [
+                "Інвертувати",
+                "кнопки +-?"
+            ],
+            "desc": "Інвертувати кнопки зміни температури."
+        },
+        "AnimSpeed": {
+            "text2": [
+                "Швидкість",
+                "анімації"
+            ],
+            "desc": "Швидкість анімації іконок у головному меню (Мілісекунди) (В=Вимк | Н=Низькa | С=Середня | М=Макс)"
+        },
+        "AnimLoop": {
+            "text2": [
+                "Циклічна",
+                "анімація"
+            ],
+            "desc": "Циклічна анімація іконок в головному меню"
+        },
+        "Brightness": {
+            "text2": [
+                "Яскравість",
+                "екрану"
+            ],
+            "desc": "Налаштування контрасту/яскравості OLED екрану"
+        },
+        "ColourInversion": {
+            "text2": [
+                "Інверт",
+                "екрану"
+            ],
+            "desc": "Інвертувати кольори на OLED екрані"
+        },
+        "LOGOTime": {
+            "text2": [
+                "Тривалість",
+                "логотипу завантаження"
+            ],
+            "desc": "Встановити тривалість показу лого при завантаженні (с=секунд)"
+        },
+        "AdvancedIdle": {
+            "text2": [
+                "Детальний ре-",
+                "жим очікуван."
+            ],
+            "desc": "Показувати детальну інформацію маленьким шрифтом на домашньому екрані"
+        },
+        "AdvancedSoldering": {
+            "text2": [
+                "Детальний",
+                "режим пайки"
+            ],
+            "desc": "Показувати детальну інформацію при пайці."
+        },
+        "PowerLimit": {
+            "text2": [
+                "Макс.",
+                "потуж."
+            ],
+            "desc": "Макс. потужність, яку може використовувати паяльник (Ват)"
+        },
+        "CalibrateCJC": {
+            "text2": [
+                "Калібрувати КХС",
+                "при наступному завантаженні"
+            ],
+            "desc": "При наступному завантаження буде відкалібровано Компенсацію Холодного Спаю жала (непотрібне при різниці температур < 5°C)"
+        },
+        "VoltageCalibration": {
+            "text2": [
+                "Калібрування",
+                "напруги"
+            ],
+            "desc": "Калібрування напруги входу. Налаштувати кнопками, натиснути і утримати щоб завершити."
+        },
+        "PowerPulsePower": {
+            "text2": [
+                "Пульс.",
+                "Навантаж."
+            ],
+            "desc": "Деякі PowerBank-и з часом вимк. живлення, якщо пристрій споживає дуже мало енергії)"
+        },
+        "PowerPulseWait": {
+            "text2": [
+                "Час між імп.",
+                "напруги"
+            ],
+            "desc": "Час між імпульсами напруги яка не дає PowerBank-у заснути (x 2.5с)"
+        },
+        "PowerPulseDuration": {
+            "text2": [
+                "Тривалість",
+                "імп. напруги"
+            ],
+            "desc": "Тривалість імпульсу напруги яка не дає PowerBank-у заснути (x 250мс)"
+        },
+        "SettingsReset": {
+            "text2": [
+                "Скинути всі",
+                "налаштування?"
+            ],
+            "desc": "Скидання всіх параметрів до стандартних значень."
+        },
+        "LanguageSwitch": {
+            "text2": [
+                "Мова:",
+                " UK  Українська"
+            ],
+            "desc": ""
+        }
+    }
+}

Translations/translation_VI.json

@@ -1,207 +1,341 @@
-{
-  "languageCode": "VI",
-  "languageLocalName": "Tieng Viet",
-  "fonts": ["ascii_basic", "latin_extended"],
-  "tempUnitFahrenheit": false,
-  "messages": {
-    "SettingsCalibrationWarning": "Chac chan mui hàn o nhiet đo phòng truoc khi tiep tuc!",
-    "SettingsResetWarning": "Ban chac chan muon khôi phuc tat ca cài đat ve mac đinh?",
-    "UVLOWarningString": "DC thap",
-    "UndervoltageString": "Đien áp thap",
-    "InputVoltageString": "Đau vào V: ",
-    "SleepingSimpleString": "Zzzz",
-    "SleepingAdvancedString": "Đang ngu...",
-    "SleepingTipAdvancedString": "Meo:",
-    "OffString": "Tat"
-  },
-  "messagesWarn": {
-    "ResetOKMessage": "Reset OK",
-    "SettingsResetMessage": ["Mot so cài đat", "đã thay đoi"],
-    "NoAccelerometerMessage": ["Không phát hien", "gia toc ke!"],
-    "NoPowerDeliveryMessage": ["Không phát hien", "USB-PD IC!"],
-    "LockingKeysString": "Đã khóa",
-    "UnlockingKeysString": "Mo khóa",
-    "WarningKeysLockedString": "Đã khóa!",
-    "WarningThermalRunaway": ["Nhiet", "Tat gia nhiet"]
-  },
-  "characters": {
-    "SettingRightChar": "R",
-    "SettingLeftChar": "L",
-    "SettingAutoChar": "A",
-    "SettingOffChar": "O",
-    "SettingSlowChar": "S",
-    "SettingMediumChar": "M",
-    "SettingFastChar": "F",
-    "SettingStartNoneChar": "O",
-    "SettingStartSolderingChar": "S",
-    "SettingStartSleepChar": "Z",
-    "SettingStartSleepOffChar": "R",
-    "SettingSensitivityOff": "O",
-    "SettingSensitivityLow": "L",
-    "SettingSensitivityMedium": "M",
-    "SettingSensitivityHigh": "H",
-    "SettingLockDisableChar": "D",
-    "SettingLockBoostChar": "B",
-    "SettingLockFullChar": "F"
-  },
-  "menuGroups": {
-    "PowerMenu": {
-      "text2": ["Cài đat", "nguon đien"],
-      "desc": "Cài đat nguon đien"
-    },
-    "SolderingMenu": {
-      "text2": ["Cài đat", "tay hàn"],
-      "desc": "Cài đat tay hàn"
-    },
-    "PowerSavingMenu": {
-      "text2": ["Che đo", "ngu"],
-      "desc": "Cài đat che đo tiet kiem đien"
-    },
-    "UIMenu": {
-      "text2": ["Giao dien", "nguoi dùng"],
-      "desc": "Cài đat giao dien nguoi dùng"
-    },
-    "AdvancedMenu": {
-      "text2": ["Cài đat", "nâng cao"],
-      "desc": "Cài đat nâng cao"
-    }
-  },
-  "menuOptions": {
-    "DCInCutoff": {
-      "text2": ["Nguon", "đien"],
-      "desc": "Nguon đien, đat đien áp giam. (DC 10V) (S 3.3V moi cell, tat gioi han công suat)"
-    },
-    "SleepTemperature": {
-      "text2": ["Nhiet đo", "khi ngu"],
-      "desc": "Giam nhiet đo khi o \"Che đo ngu\""
-    },
-    "SleepTimeout": {
-      "text2": ["Ngu", "sau"],
-      "desc": "- thoi gian truoc khi \"Che đo ngu\" bat đau (s=giây | m=phút)"
-    },
-    "ShutdownTimeout": {
-      "text2": ["Tat", "sau"],
-      "desc": "- khoang thoi gian truoc khi tay hàn tat (m=phút)"
-    },
-    "MotionSensitivity": {
-      "text2": ["Cam bien", "cu đong"],
-      "desc": "- 0=tat | 1=đo nhay thap nhat| ... | 9=đo nhay cao nhat"
-    },
-    "TemperatureUnit": {
-      "text2": ["Đon vi", "nhiet đo"],
-      "desc": "C= Đo C | F= Đo F"
-    },
-    "AdvancedIdle": {
-      "text2": ["Chi tiet", "màn hình cho"],
-      "desc": "- hien thi thông tin chi tiet bang phông chu nho hon trên màn hình cho"
-    },
-    "DisplayRotation": {
-      "text2": ["Huong", "hien thi"],
-      "desc": "- R=huong tay phai | L=huong tay trái | A=tu đong"
-    },
-    "BoostTemperature": {
-      "text2": ["Tăng", "nhiet đo"],
-      "desc": "Nhiet đo dùng trong che đo \"tăng cuong\""
-    },
-    "AutoStart": {
-      "text2": ["Nhiet đo", "đang tăng"],
-      "desc": "- O=tat | S=nhiet đo hàn | Z=cho o nhiet đo ngu đen khi cu đong | R=cho mà không gia nhiet đen khi cu đong"
-    },
-    "CooldownBlink": {
-      "text2": ["Nguoi đi", "chop mat"],
-      "desc": "-Nhap nháy nhiet đo sau khi viec gia nhiet tam dung trong khi mui hàn van nóng"
-    },
-    "TemperatureCalibration": {
-      "text2": ["Hieu chuan", "nhiet đo?"],
-      "desc": "-Bat đau hieu chuan bù nhiet cho mui hàn"
-    },
-    "SettingsReset": {
-      "text2": ["Khôi phuc", "cài đat goc?"],
-      "desc": "-đat lai tat ca cài đat ve mac đinh"
-    },
-    "VoltageCalibration": {
-      "text2": ["Hieu chinh", "đien áp đau vào?"],
-      "desc": "-bat đau hieu chuan VIN (nhan và giu đe thoát)"
-    },
-    "AdvancedSoldering": {
-      "text2": ["Chi tiet", "màn hình hàn"],
-      "desc": "-Hien thi thông tin bang phông chu nho hon trên màn hình hàn"
-    },
-    "ScrollingSpeed": {
-      "text2": ["Toc đo", "cuon"],
-      "desc": "Toc đo cuon văn ban(S=cham | F=nhanh)"
-    },
-    "QCMaxVoltage": {
-      "text2": ["QC", "Voltage"],
-      "desc": "Đien áp QC toi đa mà tay hàn yêu cau"
-    },
-    "PDNegTimeout": {
-      "text2": ["PD", "sau"],
-      "desc": "Thoi gian cho đàm phán PD trong các buoc 100ms đe tuong thích voi mot so bo sac QC"
-    },
-    "PowerLimit": {
-      "text2": ["Công suat", "gioi han"],
-      "desc": "-Công suat toi đa mà tay hàn có the su dung (W=watt)"
-    },
-    "ReverseButtonTempChange": {
-      "text2": ["Đao nguoc", "nút + -"],
-      "desc": "Đao nguoc chuc năng các nút đieu chinh nhiet đo"
-    },
-    "TempChangeShortStep": {
-      "text2": ["Thay đoi n.đo", "an nút nhanh"],
-      "desc": "Biên đo tăng/giam nhiet đo khi an nút nhanh"
-    },
-    "TempChangeLongStep": {
-      "text2": ["Thay đoi n.đo", "an nút lâu"],
-      "desc": "Biên đo tăng/giam nhiet đo khi an nút lâu"
-    },
-    "PowerPulsePower": {
-      "text2": ["Công suat", "kích nguon"],
-      "desc": "-Cuong đo công suat kích nguon (watt)"
-    },
-    "HallEffSensitivity": {
-      "text2": ["Hall", "đo nhay"],
-      "desc": "Đo nhay cam bien Hall đe phát hien che đo ngu (0=tat | 1=ít nhay nhat |...| 9=nhay nhat)"
-    },
-    "LockingMode": {
-      "text2": ["Cho phép khóa", "các nút"],
-      "desc": "Trong khi hàn, giu ca 2 nút đe khóa(D=tat | B=chi che đo tăng cuong | F=khóa hoàn toàn)"
-    },
-    "MinVolCell": {
-      "text2": ["Voltage", "toi thieu"],
-      "desc": "Đien áp toi thieu cho phép trên moi cell (3S: 3 - 3,7V | 4-6S: 2,4 - 3,7V)"
-    },
-    "AnimLoop": {
-      "text2": ["Hoat anh", "lap lai"],
-      "desc": "Lap lai các hoat anh trong màn hình chính"
-    },
-    "AnimSpeed": {
-      "text2": ["Toc đo", "hoat anh"],
-      "desc": "-Toc đo cua hoat anh menu (O=tat | S=cham | M=trung bình | F=nhanh)"
-    },
-    "PowerPulseWait": {
-      "text2": ["Trì hoãn", "đien áp kích"],
-      "desc": "Trì hoãn truoc khi kích hoat kích nguon(x 2,5 giây)"
-    },
-    "PowerPulseDuration": {
-      "text2": ["Thoi luong", "kích nguon"],
-      "desc": "-thoi luong kích nguon (x 250ms)"
-    },
-    "LanguageSwitch": {
-      "text2": ["Ngôn ngu:", "VI Tieng Viet"],
-      "desc": "-Ngôn ngu firmware hien tai"
-    },
-    "Brightness": {
-      "text2": ["Đo tuong phan", "màn hình"],
-      "desc": "-Đieu chinh đo sáng màn hình OLED"
-    },
-    "ColourInversion": {
-      "text2": ["Đao nguoc màu", "màn hình"],
-      "desc": "-Đao nguoc màu màn hình OLED"
-    },
-    "LOGOTime": {
-      "text2": ["Boot logo", "duration"],
-      "desc": "Sets the duration for the boot logo (s=seconds)"
-    }
-  }
-}
+{
+    "languageCode": "VI",
+    "languageLocalName": "Tieng Viet",
+    "tempUnitFahrenheit": false,
+    "messages": {
+        "SettingsCalibrationWarning": "Before rebooting, make sure tip & handle are at room temperature!",
+        "CJCCalibrating": "calibrating",
+        "SettingsResetWarning": "Ban chac chan muon khôi phuc tat ca cài đat ve mac đinh?",
+        "UVLOWarningString": "DC thap",
+        "UndervoltageString": "Đien áp thap",
+        "InputVoltageString": "Đau vào V: ",
+        "SleepingSimpleString": "Zzzz",
+        "SleepingAdvancedString": "Đang ngu...",
+        "SleepingTipAdvancedString": "Meo:",
+        "OffString": "Tat",
+        "DeviceFailedValidationWarning": "Your device is most likely a counterfeit!"
+    },
+    "messagesWarn": {
+        "CJCCalibrationDone": [
+            "Calibration",
+            "done!"
+        ],
+        "ResetOKMessage": "Reset OK",
+        "SettingsResetMessage": [
+            "Mot so cài đat",
+            "đã thay đoi"
+        ],
+        "NoAccelerometerMessage": [
+            "Không phát hien",
+            "gia toc ke!"
+        ],
+        "NoPowerDeliveryMessage": [
+            "Không phát hien",
+            "USB-PD IC!"
+        ],
+        "LockingKeysString": "Đã khóa",
+        "UnlockingKeysString": "Mo khóa",
+        "WarningKeysLockedString": "Đã khóa!",
+        "WarningThermalRunaway": [
+            "Nhiet",
+            "Tat gia nhiet"
+        ]
+    },
+    "characters": {
+        "SettingRightChar": "R",
+        "SettingLeftChar": "L",
+        "SettingAutoChar": "A",
+        "SettingOffChar": "O",
+        "SettingSlowChar": "S",
+        "SettingMediumChar": "M",
+        "SettingFastChar": "F",
+        "SettingStartNoneChar": "O",
+        "SettingStartSolderingChar": "S",
+        "SettingStartSleepChar": "Z",
+        "SettingStartSleepOffChar": "R",
+        "SettingSensitivityOff": "O",
+        "SettingSensitivityLow": "L",
+        "SettingSensitivityMedium": "M",
+        "SettingSensitivityHigh": "H",
+        "SettingLockDisableChar": "D",
+        "SettingLockBoostChar": "B",
+        "SettingLockFullChar": "F"
+    },
+    "menuGroups": {
+        "PowerMenu": {
+            "text2": [
+                "Cài đat",
+                "nguon đien"
+            ],
+            "desc": ""
+        },
+        "SolderingMenu": {
+            "text2": [
+                "Cài đat",
+                "tay hàn"
+            ],
+            "desc": ""
+        },
+        "PowerSavingMenu": {
+            "text2": [
+                "Che đo",
+                "ngu"
+            ],
+            "desc": ""
+        },
+        "UIMenu": {
+            "text2": [
+                "Giao dien",
+                "nguoi dùng"
+            ],
+            "desc": ""
+        },
+        "AdvancedMenu": {
+            "text2": [
+                "Cài đat",
+                "nâng cao"
+            ],
+            "desc": ""
+        }
+    },
+    "menuOptions": {
+        "DCInCutoff": {
+            "text2": [
+                "Nguon",
+                "đien"
+            ],
+            "desc": "Nguon đien, đat đien áp giam. (DC 10V) (S 3.3V moi cell, tat gioi han công suat)"
+        },
+        "MinVolCell": {
+            "text2": [
+                "Voltage",
+                "toi thieu"
+            ],
+            "desc": "Đien áp toi thieu cho phép trên moi cell (3S: 3 - 3,7V | 4-6S: 2,4 - 3,7V)"
+        },
+        "QCMaxVoltage": {
+            "text2": [
+                "QC",
+                "voltage"
+            ],
+            "desc": "Đien áp QC toi đa mà tay hàn yêu cau"
+        },
+        "PDNegTimeout": {
+            "text2": [
+                "PD",
+                "sau"
+            ],
+            "desc": "Thoi gian cho đàm phán PD trong các buoc 100ms đe tuong thích voi mot so bo sac QC"
+        },
+        "BoostTemperature": {
+            "text2": [
+                "Tăng",
+                "nhiet đo"
+            ],
+            "desc": "Nhiet đo dùng trong che đo \"tăng cuong\""
+        },
+        "AutoStart": {
+            "text2": [
+                "Nhiet đo",
+                "đang tăng"
+            ],
+            "desc": "- O=tat | S=nhiet đo hàn | Z=cho o nhiet đo ngu đen khi cu đong | R=cho mà không gia nhiet đen khi cu đong"
+        },
+        "TempChangeShortStep": {
+            "text2": [
+                "Thay đoi n.đo",
+                "an nút nhanh"
+            ],
+            "desc": "Biên đo tăng/giam nhiet đo khi an nút nhanh"
+        },
+        "TempChangeLongStep": {
+            "text2": [
+                "Thay đoi n.đo",
+                "an nút lâu"
+            ],
+            "desc": "Biên đo tăng/giam nhiet đo khi an nút lâu"
+        },
+        "LockingMode": {
+            "text2": [
+                "Cho phép khóa",
+                "các nút"
+            ],
+            "desc": "Trong khi hàn, giu ca 2 nút đe khóa(D=tat | B=chi che đo tăng cuong | F=khóa hoàn toàn)"
+        },
+        "MotionSensitivity": {
+            "text2": [
+                "Cam bien",
+                "cu đong"
+            ],
+            "desc": "- 0=tat | 1=đo nhay thap nhat| ... | 9=đo nhay cao nhat"
+        },
+        "SleepTemperature": {
+            "text2": [
+                "Nhiet đo",
+                "khi ngu"
+            ],
+            "desc": "Giam nhiet đo khi o \"Che đo ngu\""
+        },
+        "SleepTimeout": {
+            "text2": [
+                "Ngu",
+                "sau"
+            ],
+            "desc": "- thoi gian truoc khi \"Che đo ngu\" bat đau (s=giây | m=phút)"
+        },
+        "ShutdownTimeout": {
+            "text2": [
+                "Tat",
+                "sau"
+            ],
+            "desc": "- khoang thoi gian truoc khi tay hàn tat (m=phút)"
+        },
+        "HallEffSensitivity": {
+            "text2": [
+                "Hall",
+                "đo nhay"
+            ],
+            "desc": "Đo nhay cam bien Hall đe phát hien che đo ngu (0=tat | 1=ít nhay nhat |...| 9=nhay nhat)"
+        },
+        "TemperatureUnit": {
+            "text2": [
+                "Đon vi",
+                "nhiet đo"
+            ],
+            "desc": "C= Đo C | F= Đo F"
+        },
+        "DisplayRotation": {
+            "text2": [
+                "Huong",
+                "hien thi"
+            ],
+            "desc": "- R=huong tay phai | L=huong tay trái | A=tu đong"
+        },
+        "CooldownBlink": {
+            "text2": [
+                "Nguoi đi",
+                "chop mat"
+            ],
+            "desc": "-Nhap nháy nhiet đo sau khi viec gia nhiet tam dung trong khi mui hàn van nóng"
+        },
+        "ScrollingSpeed": {
+            "text2": [
+                "Toc đo",
+                "cuon"
+            ],
+            "desc": "Toc đo cuon văn ban(S=cham | F=nhanh)"
+        },
+        "ReverseButtonTempChange": {
+            "text2": [
+                "Đao nguoc",
+                "nút + -"
+            ],
+            "desc": "Đao nguoc chuc năng các nút đieu chinh nhiet đo"
+        },
+        "AnimSpeed": {
+            "text2": [
+                "Toc đo",
+                "hoat anh"
+            ],
+            "desc": "-Toc đo cua hoat anh menu (O=tat | S=cham | M=trung bình | F=nhanh)"
+        },
+        "AnimLoop": {
+            "text2": [
+                "Hoat anh",
+                "lap lai"
+            ],
+            "desc": "Lap lai các hoat anh trong màn hình chính"
+        },
+        "Brightness": {
+            "text2": [
+                "Đo tuong phan",
+                "màn hình"
+            ],
+            "desc": "-Đieu chinh đo sáng màn hình OLED"
+        },
+        "ColourInversion": {
+            "text2": [
+                "Đao nguoc màu",
+                "màn hình"
+            ],
+            "desc": "-Đao nguoc màu màn hình OLED"
+        },
+        "LOGOTime": {
+            "text2": [
+                "Boot logo",
+                "duration"
+            ],
+            "desc": "Set boot logo duration (s=seconds)"
+        },
+        "AdvancedIdle": {
+            "text2": [
+                "Chi tiet",
+                "màn hình cho"
+            ],
+            "desc": "- hien thi thông tin chi tiet bang phông chu nho hon trên màn hình cho"
+        },
+        "AdvancedSoldering": {
+            "text2": [
+                "Chi tiet",
+                "màn hình hàn"
+            ],
+            "desc": "-Hien thi thông tin bang phông chu nho hon trên màn hình hàn"
+        },
+        "PowerLimit": {
+            "text2": [
+                "Công suat",
+                "gioi han"
+            ],
+            "desc": "-Công suat toi đa mà tay hàn có the su dung (W=watt)"
+        },
+        "CalibrateCJC": {
+            "text2": [
+                "Calibrate CJC",
+                "at next boot"
+            ],
+            "desc": "At next boot tip Cold Junction Compensation will be calibrated (not required if Delta T is < 5°C)"
+        },
+        "VoltageCalibration": {
+            "text2": [
+                "Hieu chinh",
+                "đien áp đau vào?"
+            ],
+            "desc": "-bat đau hieu chuan VIN (nhan và giu đe thoát)"
+        },
+        "PowerPulsePower": {
+            "text2": [
+                "Công suat",
+                "kích nguon"
+            ],
+            "desc": "-Cuong đo công suat kích nguon (watt)"
+        },
+        "PowerPulseWait": {
+            "text2": [
+                "Trì hoãn",
+                "đien áp kích"
+            ],
+            "desc": "Trì hoãn truoc khi kích hoat kích nguon(x 2,5 giây)"
+        },
+        "PowerPulseDuration": {
+            "text2": [
+                "Thoi luong",
+                "kích nguon"
+            ],
+            "desc": "-thoi luong kích nguon (x 250ms)"
+        },
+        "SettingsReset": {
+            "text2": [
+                "Khôi phuc",
+                "cài đat goc?"
+            ],
+            "desc": "-đat lai tat ca cài đat ve mac đinh"
+        },
+        "LanguageSwitch": {
+            "text2": [
+                "Ngôn ngu:",
+                " VI  Tieng Viet"
+            ],
+            "desc": ""
+        }
+    }
+}

Translations/translation_YUE_HK.json

@@ -1,207 +1,209 @@
 {
-  "languageCode": "YUE_HK",
-  "languageLocalName": "廣東話 (香港)",
-  "fonts": ["ascii_basic", "cjk"],
-  "tempUnitFahrenheit": true,
-  "messages": {
-    "SettingsCalibrationWarning": "開始温度校正之前，請先確定焫雞咀係處於室温！",
-    "SettingsResetWarning": "你係咪確定要將全部設定重設到預設值？",
-    "UVLOWarningString": "電壓過低",
-    "UndervoltageString": "Undervoltage",
-    "InputVoltageString": "Input V: ",
-    "SleepingSimpleString": "Zzzz",
-    "SleepingAdvancedString": "Sleeping...",
-    "SleepingTipAdvancedString": "Tip:",
-    "OffString": "關"
-  },
-  "messagesWarn": {
-    "ResetOKMessage": "已重設！",
-    "SettingsResetMessage": "設定已被重設！",
-    "NoAccelerometerMessage": "未能偵測加速度計",
-    "NoPowerDeliveryMessage": "未能偵測PD晶片",
-    "LockingKeysString": "已鎖定",
-    "UnlockingKeysString": "已解除鎖定",
-    "WarningKeysLockedString": "!撳掣鎖定!",
-    "WarningThermalRunaway": "加熱失控"
-  },
-  "characters": {
-    "SettingRightChar": "右",
-    "SettingLeftChar": "左",
-    "SettingAutoChar": "自",
-    "SettingOffChar": "關",
-    "SettingSlowChar": "慢",
-    "SettingMediumChar": "中",
-    "SettingFastChar": "快",
-    "SettingStartNoneChar": "無",
-    "SettingStartSolderingChar": "焊",
-    "SettingStartSleepChar": "待",
-    "SettingStartSleepOffChar": "室",
-    "SettingSensitivityOff": "關",
-    "SettingSensitivityLow": "低",
-    "SettingSensitivityMedium": "中",
-    "SettingSensitivityHigh": "高",
-    "SettingLockDisableChar": "無",
-    "SettingLockBoostChar": "增",
-    "SettingLockFullChar": "全"
-  },
-  "menuGroups": {
-    "PowerMenu": {
-      "text2": "電源設定",
-      "desc": "電源設定"
+    "languageCode": "YUE_HK",
+    "languageLocalName": "廣東話 (香港)",
+    "tempUnitFahrenheit": true,
+    "messages": {
+        "SettingsCalibrationWarning": "Before rebooting, make sure tip & handle are at room temperature!",
+        "CJCCalibrating": "calibrating",
+        "SettingsResetWarning": "你係咪確定要將全部設定重設到預設值？",
+        "UVLOWarningString": "電壓過低",
+        "UndervoltageString": "Undervoltage",
+        "InputVoltageString": "Input V: ",
+        "SleepingSimpleString": "Zzzz",
+        "SleepingAdvancedString": "Sleeping...",
+        "SleepingTipAdvancedString": "Tip:",
+        "OffString": "關",
+        "DeviceFailedValidationWarning": "依支焫雞好有可能係冒牌貨！"
     },
-    "SolderingMenu": {
-      "text2": "焊接設定",
-      "desc": "焊接設定"
+    "messagesWarn": {
+        "CJCCalibrationDone": "Calibration done!",
+        "ResetOKMessage": "已重設！",
+        "SettingsResetMessage": "設定已被重設！",
+        "NoAccelerometerMessage": "未能偵測加速度計",
+        "NoPowerDeliveryMessage": "未能偵測PD晶片",
+        "LockingKeysString": "已鎖定",
+        "UnlockingKeysString": "已解除鎖定",
+        "WarningKeysLockedString": "!撳掣鎖定!",
+        "WarningThermalRunaway": "加熱失控"
     },
-    "PowerSavingMenu": {
-      "text2": "待機設定",
-      "desc": "自動待機慳電設定"
+    "characters": {
+        "SettingRightChar": "右",
+        "SettingLeftChar": "左",
+        "SettingAutoChar": "自",
+        "SettingOffChar": "關",
+        "SettingSlowChar": "慢",
+        "SettingMediumChar": "中",
+        "SettingFastChar": "快",
+        "SettingStartNoneChar": "無",
+        "SettingStartSolderingChar": "焊",
+        "SettingStartSleepChar": "待",
+        "SettingStartSleepOffChar": "室",
+        "SettingSensitivityOff": "關",
+        "SettingSensitivityLow": "低",
+        "SettingSensitivityMedium": "中",
+        "SettingSensitivityHigh": "高",
+        "SettingLockDisableChar": "無",
+        "SettingLockBoostChar": "增",
+        "SettingLockFullChar": "全"
     },
-    "UIMenu": {
-      "text2": "使用者介面",
-      "desc": "使用者介面設定"
+    "menuGroups": {
+        "PowerMenu": {
+            "text2": "電源設定",
+            "desc": ""
+        },
+        "SolderingMenu": {
+            "text2": "焊接設定",
+            "desc": ""
+        },
+        "PowerSavingMenu": {
+            "text2": "待機設定",
+            "desc": ""
+        },
+        "UIMenu": {
+            "text2": "使用者介面",
+            "desc": ""
+        },
+        "AdvancedMenu": {
+            "text2": "進階設定",
+            "desc": ""
+        }
     },
-    "AdvancedMenu": {
-      "text2": "進階設定",
-      "desc": "進階設定"
+    "menuOptions": {
+        "DCInCutoff": {
+            "text2": "電源",
+            "desc": "輸入電源；設定自動停機電壓 <DC 10V> <S 鋰電池，以每粒3.3V計算；依個設定會停用功率限制>"
+        },
+        "MinVolCell": {
+            "text2": "最低電壓",
+            "desc": "每粒電池嘅最低可用電壓 <伏特> <3S: 3.0V - 3.7V, 4/5/6S: 2.4V - 3.7V>"
+        },
+        "QCMaxVoltage": {
+            "text2": "QC電壓",
+            "desc": "使用QC電源時請求嘅最高目標電壓"
+        },
+        "PDNegTimeout": {
+            "text2": "PD逾時",
+            "desc": "設定USB PD協定交涉嘅逾時時限；為兼容某啲QC電源而設 <x100ms（亳秒）>"
+        },
+        "BoostTemperature": {
+            "text2": "增熱温度",
+            "desc": "喺增熱模式時使用嘅温度"
+        },
+        "AutoStart": {
+            "text2": "自動啓用",
+            "desc": "開機時自動啓用 <無=停用 | 焊=焊接模式 | 待=待機模式 | 室=室温待機>"
+        },
+        "TempChangeShortStep": {
+            "text2": "温度調整 短",
+            "desc": "調校温度時短撳一下嘅温度變幅"
+        },
+        "TempChangeLongStep": {
+            "text2": "温度調整 長",
+            "desc": "調校温度時長撳嘅温度變幅"
+        },
+        "LockingMode": {
+            "text2": "撳掣鎖定",
+            "desc": "喺焊接模式時，同時長撳兩粒掣啓用撳掣鎖定 <無=停用 | 增=淨係容許增熱模式 | 全=鎖定全部>"
+        },
+        "MotionSensitivity": {
+            "text2": "動作敏感度",
+            "desc": "0=停用 | 1=最低敏感度 | ... | 9=最高敏感度"
+        },
+        "SleepTemperature": {
+            "text2": "待機温度",
+            "desc": "喺待機模式時嘅焫雞咀温度"
+        },
+        "SleepTimeout": {
+            "text2": "待機延時",
+            "desc": "自動進入待機模式前嘅閒置等候時間 <s=秒 | m=分鐘>"
+        },
+        "ShutdownTimeout": {
+            "text2": "自動熄機",
+            "desc": "自動熄機前嘅閒置等候時間 <m=分鐘>"
+        },
+        "HallEffSensitivity": {
+            "text2": "磁場敏感度",
+            "desc": "磁場感應器用嚟啓動待機模式嘅敏感度 <0=停用 | 1=最低敏感度 | ... | 9=最高敏感度>"
+        },
+        "TemperatureUnit": {
+            "text2": "温度單位",
+            "desc": "C=攝氏 | F=華氏"
+        },
+        "DisplayRotation": {
+            "text2": "畫面方向",
+            "desc": "右=使用右手 | 左=使用左手 | 自=自動"
+        },
+        "CooldownBlink": {
+            "text2": "降温時閃爍",
+            "desc": "停止加熱之後，當焫雞咀仲係熱嗰陣閃爍畫面"
+        },
+        "ScrollingSpeed": {
+            "text2": "捲動速度",
+            "desc": "解說文字嘅捲動速度"
+        },
+        "ReverseButtonTempChange": {
+            "text2": "反轉加減掣",
+            "desc": "反轉調校温度時加減掣嘅方向"
+        },
+        "AnimSpeed": {
+            "text2": "動畫速度",
+            "desc": "功能表圖示動畫嘅速度 <關=不顯示動畫 | 慢=慢速 | 中=中速 | 快=快速>"
+        },
+        "AnimLoop": {
+            "text2": "動畫循環",
+            "desc": "循環顯示功能表圖示動畫"
+        },
+        "Brightness": {
+            "text2": "熒幕亮度",
+            "desc": "設定OLED熒幕嘅亮度"
+        },
+        "ColourInversion": {
+            "text2": "熒幕反轉色",
+            "desc": "反轉OLED熒幕嘅黑白色"
+        },
+        "LOGOTime": {
+            "text2": "開機畫面",
+            "desc": "設定開機畫面顯示時長 <s=秒>"
+        },
+        "AdvancedIdle": {
+            "text2": "詳細閒置畫面",
+            "desc": "喺閒置畫面以英文細字顯示詳細嘅資料"
+        },
+        "AdvancedSoldering": {
+            "text2": "詳細焊接畫面",
+            "desc": "喺焊接模式畫面以英文細字顯示詳細嘅資料"
+        },
+        "PowerLimit": {
+            "text2": "功率限制",
+            "desc": "限制焫雞可用嘅最大功率 <W=watt（火）>"
+        },
+        "CalibrateCJC": {
+            "text2": "校正CJC",
+            "desc": "At next boot tip Cold Junction Compensation will be calibrated (not required if Delta T is < 5 C)"
+        },
+        "VoltageCalibration": {
+            "text2": "輸入電壓校正？",
+            "desc": "開始校正VIN輸入電壓 <長撳以退出>"
+        },
+        "PowerPulsePower": {
+            "text2": "電源脈衝",
+            "desc": "為保持電源喚醒而通電所用嘅功率 <watt（火）>"
+        },
+        "PowerPulseWait": {
+            "text2": "電源脈衝間隔",
+            "desc": "為保持電源喚醒，每次通電之間嘅間隔時間 <x2.5s（秒）>"
+        },
+        "PowerPulseDuration": {
+            "text2": "電源脈衝時長",
+            "desc": "為保持電源喚醒，每次通電脈衝嘅時間長度 <x250ms（亳秒）>"
+        },
+        "SettingsReset": {
+            "text2": "全部重設？",
+            "desc": "將所有設定重設到預設值"
+        },
+        "LanguageSwitch": {
+            "text2": "語言： 廣東話",
+            "desc": ""
+        }
     }
-  },
-  "menuOptions": {
-    "DCInCutoff": {
-      "text2": "電源",
-      "desc": "輸入電源；設定自動停機電壓 <DC 10V> <S 鋰電池，以每粒3.3V計算；依個設定會停用功率限制>"
-    },
-    "SleepTemperature": {
-      "text2": "待機温度",
-      "desc": "喺待機模式時嘅焫雞咀温度"
-    },
-    "SleepTimeout": {
-      "text2": "待機延時",
-      "desc": "自動進入待機模式前嘅閒置等候時間 <s=秒 | m=分鐘>"
-    },
-    "ShutdownTimeout": {
-      "text2": "自動熄機",
-      "desc": "自動熄機前嘅閒置等候時間 <m=分鐘>"
-    },
-    "MotionSensitivity": {
-      "text2": "動作敏感度",
-      "desc": "0=停用 | 1=最低敏感度 | ... | 9=最高敏感度"
-    },
-    "TemperatureUnit": {
-      "text2": "温度單位",
-      "desc": "C=攝氏 | F=華氏"
-    },
-    "AdvancedIdle": {
-      "text2": "詳細閒置畫面",
-      "desc": "喺閒置畫面以英文細字顯示詳細嘅資料"
-    },
-    "DisplayRotation": {
-      "text2": "畫面方向",
-      "desc": "右=使用右手 | 左=使用左手 | 自=自動"
-    },
-    "BoostTemperature": {
-      "text2": "增熱温度",
-      "desc": "喺增熱模式時使用嘅温度"
-    },
-    "AutoStart": {
-      "text2": "自動啓用",
-      "desc": "開機時自動啓用 <無=停用 | 焊=焊接模式 | 待=待機模式 | 室=室温待機>"
-    },
-    "CooldownBlink": {
-      "text2": "降温時閃爍",
-      "desc": "停止加熱之後，當焫雞咀仲係熱嗰陣閃爍畫面"
-    },
-    "TemperatureCalibration": {
-      "text2": "温度校正？",
-      "desc": "開始校正焫雞咀温度位移"
-    },
-    "SettingsReset": {
-      "text2": "全部重設？",
-      "desc": "將所有設定重設到預設值"
-    },
-    "VoltageCalibration": {
-      "text2": "輸入電壓校正？",
-      "desc": "開始校正VIN輸入電壓 <長撳以退出>"
-    },
-    "AdvancedSoldering": {
-      "text2": "詳細焊接畫面",
-      "desc": "喺焊接模式畫面以英文細字顯示詳細嘅資料"
-    },
-    "ScrollingSpeed": {
-      "text2": "捲動速度",
-      "desc": "解說文字嘅捲動速度"
-    },
-    "QCMaxVoltage": {
-      "text2": "QC電壓",
-      "desc": "使用QC電源時請求嘅最高目標電壓"
-    },
-    "PDNegTimeout": {
-      "text2": "PD逾時",
-      "desc": "設定USB PD協定交涉嘅逾時時限；為兼容某啲QC電源而設 <x100ms（亳秒）>"
-    },
-    "PowerLimit": {
-      "text2": "功率限制",
-      "desc": "限制焫雞可用嘅最大功率 <W=watt（火）>"
-    },
-    "ReverseButtonTempChange": {
-      "text2": "反轉加減掣",
-      "desc": "反轉調校温度時加減掣嘅方向"
-    },
-    "TempChangeShortStep": {
-      "text2": "温度調整 短",
-      "desc": "調校温度時短撳一下嘅温度變幅"
-    },
-    "TempChangeLongStep": {
-      "text2": "温度調整 長",
-      "desc": "調校温度時長撳嘅温度變幅"
-    },
-    "PowerPulsePower": {
-      "text2": "電源脈衝",
-      "desc": "為保持電源喚醒而通電所用嘅功率 <watt（火）>"
-    },
-    "HallEffSensitivity": {
-      "text2": "磁場敏感度",
-      "desc": "磁場感應器用嚟啓動待機模式嘅敏感度 <0=停用 | 1=最低敏感度 | ... | 9=最高敏感度>"
-    },
-    "LockingMode": {
-      "text2": "撳掣鎖定",
-      "desc": "喺焊接模式時，同時長撳兩粒掣啓用撳掣鎖定 <無=停用 | 增=淨係容許增熱模式 | 全=鎖定全部>"
-    },
-    "MinVolCell": {
-      "text2": "最低電壓",
-      "desc": "每粒電池嘅最低可用電壓 <伏特> <3S: 3.0V - 3.7V, 4/5/6S: 2.4V - 3.7V>"
-    },
-    "AnimLoop": {
-      "text2": "動畫循環",
-      "desc": "循環顯示功能表圖示動畫"
-    },
-    "AnimSpeed": {
-      "text2": "動畫速度",
-      "desc": "功能表圖示動畫嘅速度 <關=不顯示動畫 | 慢=慢速 | 中=中速 | 快=快速>"
-    },
-    "PowerPulseWait": {
-      "text2": "電源脈衝間隔",
-      "desc": "為保持電源喚醒，每次通電之間嘅間隔時間 <x2.5s（秒）>"
-    },
-    "PowerPulseDuration": {
-      "text2": "電源脈衝時長",
-      "desc": "為保持電源喚醒，每次通電脈衝嘅時間長度 <x250ms（亳秒）>"
-    },
-    "LanguageSwitch": {
-      "text2": "語言： 廣東話",
-      "desc": ""
-    },
-    "Brightness": {
-      "text2": "熒幕亮度",
-      "desc": "設定OLED熒幕嘅亮度"
-    },
-    "ColourInversion": {
-      "text2": "熒幕反轉色",
-      "desc": "反轉OLED熒幕嘅黑白色"
-    },
-    "LOGOTime": {
-      "text2": ["Boot logo", "duration"],
-      "desc": "Sets the duration for the boot logo (s=seconds)"
-    }
-  }
-}
+}

Translations/translation_ZH_CN.json

@@ -1,207 +1,209 @@
 {
-  "languageCode": "ZH_CN",
-  "languageLocalName": "简体中文",
-  "fonts": ["ascii_basic", "cjk"],
-  "tempUnitFahrenheit": true,
-  "messages": {
-    "SettingsCalibrationWarning": "开始温度校正前，请先确定烙铁头正处于室温！",
-    "SettingsResetWarning": "你是否确定要将全部设定重置为默认值？",
-    "UVLOWarningString": "电压过低",
-    "UndervoltageString": "Undervoltage",
-    "InputVoltageString": "VIN: ",
-    "SleepingSimpleString": "Zzzz",
-    "SleepingAdvancedString": "Zzzz...",
-    "SleepingTipAdvancedString": "--->",
-    "OffString": "关"
-  },
-  "messagesWarn": {
-    "ResetOKMessage": "已重置！",
-    "SettingsResetMessage": "设定已被重置！",
-    "NoAccelerometerMessage": "未检测到加速度计",
-    "NoPowerDeliveryMessage": "未检测到PD电路",
-    "LockingKeysString": "已锁定",
-    "UnlockingKeysString": "已解锁",
-    "WarningKeysLockedString": "!按键锁定!",
-    "WarningThermalRunaway": "加热失控"
-  },
-  "characters": {
-    "SettingRightChar": "右",
-    "SettingLeftChar": "左",
-    "SettingAutoChar": "自",
-    "SettingOffChar": "关",
-    "SettingSlowChar": "慢",
-    "SettingMediumChar": "中",
-    "SettingFastChar": "快",
-    "SettingStartNoneChar": "无",
-    "SettingStartSolderingChar": "焊",
-    "SettingStartSleepChar": "待",
-    "SettingStartSleepOffChar": "室",
-    "SettingSensitivityOff": "关",
-    "SettingSensitivityLow": "低",
-    "SettingSensitivityMedium": "中",
-    "SettingSensitivityHigh": "高",
-    "SettingLockDisableChar": "无",
-    "SettingLockBoostChar": "增",
-    "SettingLockFullChar": "全"
-  },
-  "menuGroups": {
-    "PowerMenu": {
-      "text2": "电源设置",
-      "desc": "电源设置"
+    "languageCode": "ZH_CN",
+    "languageLocalName": "简体中文",
+    "tempUnitFahrenheit": true,
+    "messages": {
+        "SettingsCalibrationWarning": "Before rebooting, make sure tip & handle are at room temperature!",
+        "CJCCalibrating": "calibrating",
+        "SettingsResetWarning": "你是否确定要将全部设定重置为默认值？",
+        "UVLOWarningString": "电压过低",
+        "UndervoltageString": "Undervoltage",
+        "InputVoltageString": "VIN: ",
+        "SleepingSimpleString": "Zzzz",
+        "SleepingAdvancedString": "Zzzz...",
+        "SleepingTipAdvancedString": "--->",
+        "OffString": "关",
+        "DeviceFailedValidationWarning": "这支电烙铁很有可能是冒牌货！"
     },
-    "SolderingMenu": {
-      "text2": "焊接设置",
-      "desc": "焊接设置"
+    "messagesWarn": {
+        "CJCCalibrationDone": "Calibration done!",
+        "ResetOKMessage": "已重置！",
+        "SettingsResetMessage": "设定已被重置！",
+        "NoAccelerometerMessage": "未检测到加速度计",
+        "NoPowerDeliveryMessage": "未检测到PD电路",
+        "LockingKeysString": "已锁定",
+        "UnlockingKeysString": "已解锁",
+        "WarningKeysLockedString": "!按键锁定!",
+        "WarningThermalRunaway": "加热失控"
     },
-    "PowerSavingMenu": {
-      "text2": "待机设置",
-      "desc": "自动待机省电设置"
+    "characters": {
+        "SettingRightChar": "右",
+        "SettingLeftChar": "左",
+        "SettingAutoChar": "自",
+        "SettingOffChar": "关",
+        "SettingSlowChar": "慢",
+        "SettingMediumChar": "中",
+        "SettingFastChar": "快",
+        "SettingStartNoneChar": "无",
+        "SettingStartSolderingChar": "焊",
+        "SettingStartSleepChar": "待",
+        "SettingStartSleepOffChar": "室",
+        "SettingSensitivityOff": "关",
+        "SettingSensitivityLow": "低",
+        "SettingSensitivityMedium": "中",
+        "SettingSensitivityHigh": "高",
+        "SettingLockDisableChar": "无",
+        "SettingLockBoostChar": "增",
+        "SettingLockFullChar": "全"
     },
-    "UIMenu": {
-      "text2": "用户界面",
-      "desc": "用户界面设置"
+    "menuGroups": {
+        "PowerMenu": {
+            "text2": "电源设置",
+            "desc": ""
+        },
+        "SolderingMenu": {
+            "text2": "焊接设置",
+            "desc": ""
+        },
+        "PowerSavingMenu": {
+            "text2": "待机设置",
+            "desc": ""
+        },
+        "UIMenu": {
+            "text2": "用户界面",
+            "desc": ""
+        },
+        "AdvancedMenu": {
+            "text2": "高级设置",
+            "desc": ""
+        }
     },
-    "AdvancedMenu": {
-      "text2": "高级设置",
-      "desc": "高级设置"
+    "menuOptions": {
+        "DCInCutoff": {
+            "text2": "下限电压",
+            "desc": "设置自动停机电压 <DC=10V | S=（串）每节锂电池3.3V；此设置会禁用功率限制>"
+        },
+        "MinVolCell": {
+            "text2": "最低电压",
+            "desc": "每节电池的最低允许电压 <V（伏特）> <3S: 3.0V - 3.7V, 4/5/6S: 2.4V - 3.7V>"
+        },
+        "QCMaxVoltage": {
+            "text2": "QC电压",
+            "desc": "使用QC电源时请求的最高目标电压"
+        },
+        "PDNegTimeout": {
+            "text2": "PD超时",
+            "desc": "设定USB-PD协议交涉的超时时限；为兼容某些QC电源而设 <x100ms（亳秒）>"
+        },
+        "BoostTemperature": {
+            "text2": "增热温度",
+            "desc": "增热模式时使用的温度"
+        },
+        "AutoStart": {
+            "text2": "自动启动",
+            "desc": "开机时自动启动 <无=禁用 | 焊=焊接模式 | 待=待机模式 | 室=室温待机>"
+        },
+        "TempChangeShortStep": {
+            "text2": "短按温度调整",
+            "desc": "调校温度时短按按键的温度变幅"
+        },
+        "TempChangeLongStep": {
+            "text2": "长按温度调整",
+            "desc": "调校温度时长按按键的温度变幅"
+        },
+        "LockingMode": {
+            "text2": "按键锁定",
+            "desc": "焊接模式时，同时长按两个按键启用按键锁定 <无=禁用 | 增=只容许增热模式 | 全=完全锁定>"
+        },
+        "MotionSensitivity": {
+            "text2": "动作灵敏度",
+            "desc": "0=禁用 | 1=最低灵敏度 | ... | 9=最高灵敏度"
+        },
+        "SleepTemperature": {
+            "text2": "待机温度",
+            "desc": "待机模式时的烙铁头温度"
+        },
+        "SleepTimeout": {
+            "text2": "待机超时",
+            "desc": "自动进入待机模式前的等候时间 <s=秒 | m=分钟>"
+        },
+        "ShutdownTimeout": {
+            "text2": "自动关机",
+            "desc": "自动关机前的等候时间 <m=分钟>"
+        },
+        "HallEffSensitivity": {
+            "text2": "磁场灵敏度",
+            "desc": "霍尔效应传感器用作启动待机模式的灵敏度 <0=禁用 | 1=最低灵敏度 | ... | 9=最高灵敏度>"
+        },
+        "TemperatureUnit": {
+            "text2": "温度单位",
+            "desc": "C=摄氏 | F=华氏"
+        },
+        "DisplayRotation": {
+            "text2": "显示方向",
+            "desc": "右=右手 | 左=左手 | 自=自动"
+        },
+        "CooldownBlink": {
+            "text2": "降温时闪显",
+            "desc": "停止加热之后，闪动温度显示提醒烙铁头仍处于高温状态"
+        },
+        "ScrollingSpeed": {
+            "text2": "滚动速度",
+            "desc": "解说文字的滚动速度"
+        },
+        "ReverseButtonTempChange": {
+            "text2": "调换加减键",
+            "desc": "调校温度时更换加减键的方向"
+        },
+        "AnimSpeed": {
+            "text2": "动画速度",
+            "desc": "主菜单中功能图标动画的播放速度 <关=不显示动画 | 慢=慢速 | 中=中速 | 快=快速>"
+        },
+        "AnimLoop": {
+            "text2": "动画循环",
+            "desc": "主菜单中循环播放功能图标动画"
+        },
+        "Brightness": {
+            "text2": "屏幕亮度",
+            "desc": "调整OLED屏幕的亮度"
+        },
+        "ColourInversion": {
+            "text2": "反转屏幕颜色",
+            "desc": "反转OLED黑/白屏幕"
+        },
+        "LOGOTime": {
+            "text2": "开机画面",
+            "desc": "设定开机画面显示时长 <s=秒>"
+        },
+        "AdvancedIdle": {
+            "text2": "闲置画面详情",
+            "desc": "闲置画面以英语小字体显示详情"
+        },
+        "AdvancedSoldering": {
+            "text2": "焊接画面详情",
+            "desc": "焊接模式画面以英语小字体显示详请"
+        },
+        "PowerLimit": {
+            "text2": "功率限制",
+            "desc": "限制烙铁可用的最大功率 <W=瓦特>"
+        },
+        "CalibrateCJC": {
+            "text2": "校正CJC",
+            "desc": "At next boot tip Cold Junction Compensation will be calibrated (not required if Delta T is < 5 C)"
+        },
+        "VoltageCalibration": {
+            "text2": "输入电压校正？",
+            "desc": "开始校正输入电压（VIN）<长按以退出>"
+        },
+        "PowerPulsePower": {
+            "text2": "电源脉冲",
+            "desc": "为保持电源处于唤醒状态所用的功率 <Watt（瓦特）>"
+        },
+        "PowerPulseWait": {
+            "text2": "电源脉冲间隔",
+            "desc": "为保持电源处于唤醒状态，每次通电之间的间隔时间 <x2.5s（秒）>"
+        },
+        "PowerPulseDuration": {
+            "text2": "电源脉冲时长",
+            "desc": "为保持电源处于唤醒状态，每次通电脉冲的时间长度 <x250ms（亳秒）>"
+        },
+        "SettingsReset": {
+            "text2": "全部重置？",
+            "desc": "将所有设定重置为默认值"
+        },
+        "LanguageSwitch": {
+            "text2": "语言：简体中文",
+            "desc": ""
+        }
     }
-  },
-  "menuOptions": {
-    "DCInCutoff": {
-      "text2": "下限电压",
-      "desc": "设置自动停机电压 <DC=10V | S=（串）每节锂电池3.3V；此设置会禁用功率限制>"
-    },
-    "SleepTemperature": {
-      "text2": "待机温度",
-      "desc": "待机模式时的烙铁头温度"
-    },
-    "SleepTimeout": {
-      "text2": "待机超时",
-        "desc": "自动进入待机模式前的等候时间 <s=秒 | m=分钟>"
-    },
-    "ShutdownTimeout": {
-      "text2": "自动关机",
-      "desc": "自动关机前的等候时间 <m=分钟>"
-    },
-    "MotionSensitivity": {
-      "text2": "动作灵敏度",
-      "desc": "0=禁用 | 1=最低灵敏度 | ... | 9=最高灵敏度"
-    },
-    "TemperatureUnit": {
-      "text2": "温度单位",
-      "desc": "C=摄氏 | F=华氏"
-    },
-    "AdvancedIdle": {
-      "text2": "闲置画面详情",
-      "desc": "闲置画面以英语小字体显示详情"
-    },
-    "DisplayRotation": {
-      "text2": "显示方向",
-      "desc": "右=右手 | 左=左手 | 自=自动"
-    },
-    "BoostTemperature": {
-      "text2": "增热温度",
-      "desc": "增热模式时使用的温度"
-    },
-    "AutoStart": {
-      "text2": "自动启动",
-      "desc": "开机时自动启动 <无=禁用 | 焊=焊接模式 | 待=待机模式 | 室=室温待机>"
-    },
-    "CooldownBlink": {
-      "text2": "降温时闪显",
-      "desc": "停止加热之后，闪动温度显示提醒烙铁头仍处于高温状态"
-    },
-    "TemperatureCalibration": {
-      "text2": "温度校正？",
-      "desc": "开始校正烙铁头温度偏移"
-    },
-    "SettingsReset": {
-      "text2": "全部重置？",
-      "desc": "将所有设定重置为默认值"
-    },
-    "VoltageCalibration": {
-      "text2": "输入电压校正？",
-      "desc": "开始校正输入电压（VIN）<长按以退出>"
-    },
-    "AdvancedSoldering": {
-      "text2": "焊接画面详情",
-      "desc": "焊接模式画面以英语小字体显示详请"
-    },
-    "ScrollingSpeed": {
-      "text2": "滚动速度",
-      "desc": "解说文字的滚动速度"
-    },
-    "QCMaxVoltage": {
-      "text2": "QC电压",
-      "desc": "使用QC电源时请求的最高目标电压"
-    },
-    "PDNegTimeout": {
-      "text2": "PD超时",
-      "desc": "设定USB-PD协议交涉的超时时限；为兼容某些QC电源而设 <x100ms（亳秒）>"
-    },
-    "PowerLimit": {
-      "text2": "功率限制",
-      "desc": "限制烙铁可用的最大功率 <W=瓦特>"
-    },
-    "ReverseButtonTempChange": {
-      "text2": "调换加减键",
-      "desc": "调校温度时更换加减键的方向"
-    },
-    "TempChangeShortStep": {
-      "text2": "短按温度调整",
-      "desc": "调校温度时短按按键的温度变幅"
-    },
-    "TempChangeLongStep": {
-      "text2": "长按温度调整",
-      "desc": "调校温度时长按按键的温度变幅"
-    },
-    "PowerPulsePower": {
-      "text2": "电源脉冲",
-      "desc": "为保持电源处于唤醒状态所用的功率 <Watt（瓦特）>"
-    },
-    "HallEffSensitivity": {
-      "text2": "磁场灵敏度",
-      "desc": "霍尔效应传感器用作启动待机模式的灵敏度 <0=禁用 | 1=最低灵敏度 | ... | 9=最高灵敏度>"
-    },
-    "LockingMode": {
-      "text2": "按键锁定",
-      "desc": "焊接模式时，同时长按两个按键启用按键锁定 <无=禁用 | 增=只容许增热模式 | 全=完全锁定>"
-    },
-    "MinVolCell": {
-      "text2": "最低电压",
-      "desc": "每节电池的最低允许电压 <V（伏特）> <3S: 3.0V - 3.7V, 4/5/6S: 2.4V - 3.7V>"
-    },
-    "AnimLoop": {
-      "text2": "动画循环",
-      "desc": "主菜单中循环播放功能图标动画"
-    },
-    "AnimSpeed": {
-      "text2": "动画速度",
-      "desc": "主菜单中功能图标动画的播放速度 <关=不显示动画 | 慢=慢速 | 中=中速 | 快=快速>"
-    },
-    "PowerPulseWait": {
-      "text2": "电源脉冲间隔",
-      "desc": "为保持电源处于唤醒状态，每次通电之间的间隔时间 <x2.5s（秒）>"
-    },
-    "PowerPulseDuration": {
-      "text2": "电源脉冲时长",
-      "desc": "为保持电源处于唤醒状态，每次通电脉冲的时间长度 <x250ms（亳秒）>"
-    },
-    "LanguageSwitch": {
-      "text2": "语言：简体中文",
-      "desc": ""
-    },
-    "Brightness": {
-      "text2": "屏幕亮度",
-      "desc": "调整OLED屏幕的亮度"
-    },
-    "ColourInversion": {
-      "text2": "反转屏幕颜色",
-      "desc": "反转OLED黑/白屏幕"
-    },
-    "LOGOTime": {
-      "text2": ["Boot logo", "duration"],
-      "desc": "Sets the duration for the boot logo (s=seconds)"
-    }
-  }
-}
+}

Translations/translation_ZH_TW.json

@@ -1,207 +1,209 @@
 {
-  "languageCode": "ZH_TW",
-  "languageLocalName": "正體中文",
-  "fonts": ["ascii_basic", "cjk"],
-  "tempUnitFahrenheit": true,
-  "messages": {
-    "SettingsCalibrationWarning": "開始溫度校正前，請先確定烙鐵頭正處於室溫！",
-    "SettingsResetWarning": "你是否確定要將全部設定重設到預設值？",
-    "UVLOWarningString": "電壓過低",
-    "UndervoltageString": "Undervoltage",
-    "InputVoltageString": "Input V: ",
-    "SleepingSimpleString": "Zzzz",
-    "SleepingAdvancedString": "Sleeping...",
-    "SleepingTipAdvancedString": "Tip:",
-    "OffString": "關"
-  },
-  "messagesWarn": {
-    "ResetOKMessage": "已重設！",
-    "SettingsResetMessage": "設定已被重設！",
-    "NoAccelerometerMessage": "未能偵測加速度計",
-    "NoPowerDeliveryMessage": "未能偵測PD晶片",
-    "LockingKeysString": "已鎖定",
-    "UnlockingKeysString": "已解除鎖定",
-    "WarningKeysLockedString": "!按鍵鎖定!",
-    "WarningThermalRunaway": "加熱失控"
-  },
-  "characters": {
-    "SettingRightChar": "右",
-    "SettingLeftChar": "左",
-    "SettingAutoChar": "自",
-    "SettingOffChar": "關",
-    "SettingSlowChar": "慢",
-    "SettingMediumChar": "中",
-    "SettingFastChar": "快",
-    "SettingStartNoneChar": "無",
-    "SettingStartSolderingChar": "焊",
-    "SettingStartSleepChar": "待",
-    "SettingStartSleepOffChar": "室",
-    "SettingSensitivityOff": "關",
-    "SettingSensitivityLow": "低",
-    "SettingSensitivityMedium": "中",
-    "SettingSensitivityHigh": "高",
-    "SettingLockDisableChar": "無",
-    "SettingLockBoostChar": "增",
-    "SettingLockFullChar": "全"
-  },
-  "menuGroups": {
-    "PowerMenu": {
-      "text2": "電源設定",
-      "desc": "電源設定"
+    "languageCode": "ZH_TW",
+    "languageLocalName": "正體中文",
+    "tempUnitFahrenheit": true,
+    "messages": {
+        "SettingsCalibrationWarning": "Before rebooting, make sure tip & handle are at room temperature!",
+        "CJCCalibrating": "calibrating",
+        "SettingsResetWarning": "你是否確定要將全部設定重設到預設值？",
+        "UVLOWarningString": "電壓過低",
+        "UndervoltageString": "Undervoltage",
+        "InputVoltageString": "Input V: ",
+        "SleepingSimpleString": "Zzzz",
+        "SleepingAdvancedString": "Sleeping...",
+        "SleepingTipAdvancedString": "Tip:",
+        "OffString": "關",
+        "DeviceFailedValidationWarning": "這支電烙鐵很有可能是冒牌貨！"
     },
-    "SolderingMenu": {
-      "text2": "焊接設定",
-      "desc": "焊接設定"
+    "messagesWarn": {
+        "CJCCalibrationDone": "Calibration done!",
+        "ResetOKMessage": "已重設！",
+        "SettingsResetMessage": "設定已被重設！",
+        "NoAccelerometerMessage": "未能偵測加速度計",
+        "NoPowerDeliveryMessage": "未能偵測PD晶片",
+        "LockingKeysString": "已鎖定",
+        "UnlockingKeysString": "已解除鎖定",
+        "WarningKeysLockedString": "!按鍵鎖定!",
+        "WarningThermalRunaway": "加熱失控"
     },
-    "PowerSavingMenu": {
-      "text2": "待機設定",
-      "desc": "自動待機省電設定"
+    "characters": {
+        "SettingRightChar": "右",
+        "SettingLeftChar": "左",
+        "SettingAutoChar": "自",
+        "SettingOffChar": "關",
+        "SettingSlowChar": "慢",
+        "SettingMediumChar": "中",
+        "SettingFastChar": "快",
+        "SettingStartNoneChar": "無",
+        "SettingStartSolderingChar": "焊",
+        "SettingStartSleepChar": "待",
+        "SettingStartSleepOffChar": "室",
+        "SettingSensitivityOff": "關",
+        "SettingSensitivityLow": "低",
+        "SettingSensitivityMedium": "中",
+        "SettingSensitivityHigh": "高",
+        "SettingLockDisableChar": "無",
+        "SettingLockBoostChar": "增",
+        "SettingLockFullChar": "全"
     },
-    "UIMenu": {
-      "text2": "使用者介面",
-      "desc": "使用者介面設定"
+    "menuGroups": {
+        "PowerMenu": {
+            "text2": "電源設定",
+            "desc": ""
+        },
+        "SolderingMenu": {
+            "text2": "焊接設定",
+            "desc": ""
+        },
+        "PowerSavingMenu": {
+            "text2": "待機設定",
+            "desc": ""
+        },
+        "UIMenu": {
+            "text2": "使用者介面",
+            "desc": ""
+        },
+        "AdvancedMenu": {
+            "text2": "進階設定",
+            "desc": ""
+        }
     },
-    "AdvancedMenu": {
-      "text2": "進階設定",
-      "desc": "進階設定"
+    "menuOptions": {
+        "DCInCutoff": {
+            "text2": "電源",
+            "desc": "輸入電源；設定自動停機電壓 <DC 10V> <S 鋰電池，以每顆3.3V計算；此設定會停用功率限制>"
+        },
+        "MinVolCell": {
+            "text2": "最低電壓",
+            "desc": "每顆電池的最低可用電壓 <伏特> <3S: 3.0V - 3.7V, 4/5/6S: 2.4V - 3.7V>"
+        },
+        "QCMaxVoltage": {
+            "text2": "QC電壓",
+            "desc": "使用QC電源時請求的最高目標電壓"
+        },
+        "PDNegTimeout": {
+            "text2": "PD逾時",
+            "desc": "設定USB PD協定交涉的逾時時限；為兼容某些QC電源而設 <x100ms（亳秒）>"
+        },
+        "BoostTemperature": {
+            "text2": "增熱溫度",
+            "desc": "於增熱模式時使用的溫度"
+        },
+        "AutoStart": {
+            "text2": "自動啟用",
+            "desc": "開機時自動啟用 <無=停用 | 焊=焊接模式 | 待=待機模式 | 室=室溫待機>"
+        },
+        "TempChangeShortStep": {
+            "text2": "溫度調整 短",
+            "desc": "調校溫度時短按一下的溫度變幅"
+        },
+        "TempChangeLongStep": {
+            "text2": "溫度調整 長",
+            "desc": "調校溫度時長按按鍵的溫度變幅"
+        },
+        "LockingMode": {
+            "text2": "按鍵鎖定",
+            "desc": "於焊接模式時，同時長按兩個按鍵啟用按鍵鎖定 <無=停用 | 增=只容許增熱模式 | 全=鎖定全部>"
+        },
+        "MotionSensitivity": {
+            "text2": "動作敏感度",
+            "desc": "0=停用 | 1=最低敏感度 | ... | 9=最高敏感度"
+        },
+        "SleepTemperature": {
+            "text2": "待機溫度",
+            "desc": "於待機模式時的烙鐵頭溫度"
+        },
+        "SleepTimeout": {
+            "text2": "待機延時",
+            "desc": "自動進入待機模式前的閒置等候時間 <s=秒 | m=分鐘>"
+        },
+        "ShutdownTimeout": {
+            "text2": "自動關機",
+            "desc": "自動關機前的閒置等候時間 <m=分鐘>"
+        },
+        "HallEffSensitivity": {
+            "text2": "磁場敏感度",
+            "desc": "磁場感應器用作啟動待機模式的敏感度 <0=停用 | 1=最低敏感度 | ... | 9=最高敏感度>"
+        },
+        "TemperatureUnit": {
+            "text2": "溫標",
+            "desc": "C=攝氏 | F=華氏"
+        },
+        "DisplayRotation": {
+            "text2": "畫面方向",
+            "desc": "右=使用右手 | 左=使用左手 | 自=自動"
+        },
+        "CooldownBlink": {
+            "text2": "降溫時閃爍",
+            "desc": "停止加熱之後，當烙鐵頭仍處於高溫時閃爍畫面"
+        },
+        "ScrollingSpeed": {
+            "text2": "捲動速度",
+            "desc": "解說文字的捲動速度"
+        },
+        "ReverseButtonTempChange": {
+            "text2": "調換加減鍵",
+            "desc": "調校溫度時調換加減鍵的方向"
+        },
+        "AnimSpeed": {
+            "text2": "動畫速度",
+            "desc": "功能表圖示動畫的速度 <關=不顯示動畫 | 慢=慢速 | 中=中速 | 快=快速>"
+        },
+        "AnimLoop": {
+            "text2": "動畫循環",
+            "desc": "循環顯示功能表圖示動畫"
+        },
+        "Brightness": {
+            "text2": "螢幕亮度",
+            "desc": "設定OLED螢幕的亮度"
+        },
+        "ColourInversion": {
+            "text2": "螢幕反轉色",
+            "desc": "反轉OLED螢幕的黑白色彩"
+        },
+        "LOGOTime": {
+            "text2": "開機畫面",
+            "desc": "設定開機畫面顯示時長 <s=秒>"
+        },
+        "AdvancedIdle": {
+            "text2": "詳細閒置畫面",
+            "desc": "於閒置畫面以英文小字型顯示詳細資料"
+        },
+        "AdvancedSoldering": {
+            "text2": "詳細焊接畫面",
+            "desc": "於焊接模式畫面以英文小字型顯示詳細資料"
+        },
+        "PowerLimit": {
+            "text2": "功率限制",
+            "desc": "限制烙鐵可用的最大功率 <W=watt（瓦特）>"
+        },
+        "CalibrateCJC": {
+            "text2": "校正CJC",
+            "desc": "At next boot tip Cold Junction Compensation will be calibrated (not required if Delta T is < 5 C)"
+        },
+        "VoltageCalibration": {
+            "text2": "輸入電壓校正？",
+            "desc": "開始校正VIN輸入電壓 <長按以退出>"
+        },
+        "PowerPulsePower": {
+            "text2": "電源脈衝",
+            "desc": "為保持電源喚醒而通電所用的功率 <watt（瓦特）>"
+        },
+        "PowerPulseWait": {
+            "text2": "電源脈衝間隔",
+            "desc": "為保持電源喚醒，每次通電之間的間隔時間 <x2.5s（秒）>"
+        },
+        "PowerPulseDuration": {
+            "text2": "電源脈衝時長",
+            "desc": "為保持電源喚醒，每次通電脈衝的時間長度 <x250ms（亳秒）>"
+        },
+        "SettingsReset": {
+            "text2": "全部重設？",
+            "desc": "將所有設定重設到預設值"
+        },
+        "LanguageSwitch": {
+            "text2": "語言：正體中文",
+            "desc": ""
+        }
     }
-  },
-  "menuOptions": {
-    "DCInCutoff": {
-      "text2": "電源",
-      "desc": "輸入電源；設定自動停機電壓 <DC 10V> <S 鋰電池，以每顆3.3V計算；此設定會停用功率限制>"
-    },
-    "SleepTemperature": {
-      "text2": "待機溫度",
-      "desc": "於待機模式時的烙鐵頭溫度"
-    },
-    "SleepTimeout": {
-      "text2": "待機延時",
-      "desc": "自動進入待機模式前的閒置等候時間 <s=秒 | m=分鐘>"
-    },
-    "ShutdownTimeout": {
-      "text2": "自動關機",
-      "desc": "自動關機前的閒置等候時間 <m=分鐘>"
-    },
-    "MotionSensitivity": {
-      "text2": "動作敏感度",
-      "desc": "0=停用 | 1=最低敏感度 | ... | 9=最高敏感度"
-    },
-    "TemperatureUnit": {
-      "text2": "溫標",
-      "desc": "C=攝氏 | F=華氏"
-    },
-    "AdvancedIdle": {
-      "text2": "詳細閒置畫面",
-      "desc": "於閒置畫面以英文小字型顯示詳細資料"
-    },
-    "DisplayRotation": {
-      "text2": "畫面方向",
-      "desc": "右=使用右手 | 左=使用左手 | 自=自動"
-    },
-    "BoostTemperature": {
-      "text2": "增熱溫度",
-      "desc": "於增熱模式時使用的溫度"
-    },
-    "AutoStart": {
-      "text2": "自動啟用",
-      "desc": "開機時自動啟用 <無=停用 | 焊=焊接模式 | 待=待機模式 | 室=室溫待機>"
-    },
-    "CooldownBlink": {
-      "text2": "降溫時閃爍",
-      "desc": "停止加熱之後，當烙鐵頭仍處於高溫時閃爍畫面"
-    },
-    "TemperatureCalibration": {
-      "text2": "溫度校正？",
-      "desc": "開始校正烙鐵頭溫度位移"
-    },
-    "SettingsReset": {
-      "text2": "全部重設？",
-      "desc": "將所有設定重設到預設值"
-    },
-    "VoltageCalibration": {
-      "text2": "輸入電壓校正？",
-      "desc": "開始校正VIN輸入電壓 <長按以退出>"
-    },
-    "AdvancedSoldering": {
-      "text2": "詳細焊接畫面",
-      "desc": "於焊接模式畫面以英文小字型顯示詳細資料"
-    },
-    "ScrollingSpeed": {
-      "text2": "捲動速度",
-      "desc": "解說文字的捲動速度"
-    },
-    "QCMaxVoltage": {
-      "text2": "QC電壓",
-      "desc": "使用QC電源時請求的最高目標電壓"
-    },
-    "PDNegTimeout": {
-      "text2": "PD逾時",
-      "desc": "設定USB PD協定交涉的逾時時限；為兼容某些QC電源而設 <x100ms（亳秒）>"
-    },
-    "PowerLimit": {
-      "text2": "功率限制",
-      "desc": "限制烙鐵可用的最大功率 <W=watt（瓦特）>"
-    },
-    "ReverseButtonTempChange": {
-      "text2": "調換加減鍵",
-      "desc": "調校溫度時調換加減鍵的方向"
-    },
-    "TempChangeShortStep": {
-      "text2": "溫度調整 短",
-      "desc": "調校溫度時短按一下的溫度變幅"
-    },
-    "TempChangeLongStep": {
-      "text2": "溫度調整 長",
-      "desc": "調校溫度時長按按鍵的溫度變幅"
-    },
-    "PowerPulsePower": {
-      "text2": "電源脈衝",
-      "desc": "為保持電源喚醒而通電所用的功率 <watt（瓦特）>"
-    },
-    "HallEffSensitivity": {
-      "text2": "磁場敏感度",
-      "desc": "磁場感應器用作啟動待機模式的敏感度 <0=停用 | 1=最低敏感度 | ... | 9=最高敏感度>"
-    },
-    "LockingMode": {
-      "text2": "按鍵鎖定",
-      "desc": "於焊接模式時，同時長按兩個按鍵啟用按鍵鎖定 <無=停用 | 增=只容許增熱模式 | 全=鎖定全部>"
-    },
-    "MinVolCell": {
-      "text2": "最低電壓",
-      "desc": "每顆電池的最低可用電壓 <伏特> <3S: 3.0V - 3.7V, 4/5/6S: 2.4V - 3.7V>"
-    },
-    "AnimLoop": {
-      "text2": "動畫循環",
-      "desc": "循環顯示功能表圖示動畫"
-    },
-    "AnimSpeed": {
-      "text2": "動畫速度",
-      "desc": "功能表圖示動畫的速度 <關=不顯示動畫 | 慢=慢速 | 中=中速 | 快=快速>"
-    },
-    "PowerPulseWait": {
-      "text2": "電源脈衝間隔",
-      "desc": "為保持電源喚醒，每次通電之間的間隔時間 <x2.5s（秒）>"
-    },
-    "PowerPulseDuration": {
-      "text2": "電源脈衝時長",
-      "desc": "為保持電源喚醒，每次通電脈衝的時間長度 <x250ms（亳秒）>"
-    },
-    "LanguageSwitch": {
-      "text2": "語言：正體中文",
-      "desc": ""
-    },
-    "Brightness": {
-      "text2": "螢幕亮度",
-      "desc": "設定OLED螢幕的亮度"
-    },
-    "ColourInversion": {
-      "text2": "螢幕反轉色",
-      "desc": "反轉OLED螢幕的黑白色彩"
-    },
-    "LOGOTime": {
-      "text2": ["Boot logo", "duration"],
-      "desc": "Sets the duration for the boot logo (s=seconds)"
-    }
-  }
-}
+}

Translations/translations_def.js

@@ -1,433 +1,424 @@
-var def =
-{
-	"messages": [
-		{
-			"id": "SettingsCalibrationWarning",
-			"description": "Confirmation message shown before performing an offset calibration. Should warn the user to make sure tip and handle are at the same temperature."
-		},
-		{
-			"id": "SettingsResetWarning",
-			"description": "Confirmation message shown before confirming a settings reset."
-		},
-		{
-			"id": "UVLOWarningString",
-			"maxLen": 8,
-			"description": "Warning text shown when the unit turns off due to undervoltage in simple mode."
-		},
-		{
-			"id": "UndervoltageString",
-			"maxLen": 15,
-			"description": "Warning text shown when the unit turns off due to undervoltage in advanced mode."
-		},
-		{
-			"id": "InputVoltageString",
-			"maxLen": 11,
-			"note": "Preferably end with a space",
-			"description": "Prefix text for 'Input Voltage' shown before showing the input voltage reading."
-
-		},
-		{
-			"id": "SleepingSimpleString",
-			"maxLen": 4,
-			"description": "The text shown to indicate the unit is in sleep mode when the advanced view is NOT on."
-		},
-		{
-			"id": "SleepingAdvancedString",
-			"maxLen": 15,
-			"description": "The text shown to indicate the unit is in sleep mode when the advanced view is turned on."
-		},
-		{
-			"id": "SleepingTipAdvancedString",
-			"maxLen": 6,
-			"description": "The prefix text shown before tip temperature when the unit is sleeping with advanced view on."
-		},
-		{
-			"id": "OffString",
-			"maxLen": 3,
-			"description": "Shown when a setting is turned off."
-		}
-	],
-	"messagesWarn": [
-		{
-			"id": "SettingsResetMessage",
-			"description": "Shown when the settings are reset to factory defaults either by the user or by incompatible firmware changes."
-		},
-		{
-			"id": "NoAccelerometerMessage",
-			"description": "No accelerometer could be communicated with. This means that either the device's accelerometer is broken or unknown to IronOS. All motion-based settings are disabled and motion-based features will not work."
-		},
-		{
-			"id": "NoPowerDeliveryMessage",
-			"description": "The IC required for USB-PD could not be communicated with. This is an error warning that USB-PD WILL NOT FUNCTION. Generally indicative of either a hardware or software issues."
-		},
-		{
-			"id": "LockingKeysString",
-			"description": "Shown when keys are locked"
-		},
-		{
-			"id": "UnlockingKeysString",
-			"description": "Shown when keys are unlocked"
-		},
-		{
-			"id": "WarningKeysLockedString",
-			"description": "Warning that is shown when input is ignored due to the key lock being on"
-		},
-		{
-			"id": "WarningThermalRunaway",
-			"description": "Warning text shown when the software has disabled the heater as a safety precaution as the temperature reading didn't react as expected."
-		}
-	],
-	"characters": [
-		{
-			"id": "SettingRightChar",
-			"len": 1,
-			"description": "Shown for fixed Right-handed display rotation."
-		},
-		{
-			"id": "SettingLeftChar",
-			"len": 1,
-			"description": "Shown for fixed Left-handed display rotation."
-		},
-		{
-			"id": "SettingAutoChar",
-			"len": 1,
-			"description": "Shown for automatic display rotation."
-		},
-		{
-			"id": "SettingFastChar",
-			"len": 1,
-			"description": "Shown when a setting is set to a fast value i.e. animation speed"
-		},
-		{
-			"id": "SettingSlowChar",
-			"len": 1,
-			"description": "Shown when a setting is set to a slow value i.e. animation speed"
-		},
-		{
-			"id": "SettingMediumChar",
-			"len": 1,
-			"description": "Shown when a setting is set to a medium value i.e. animation speed"
-		},
-		{
-			"id": "SettingOffChar",
-			"len": 1,
-			"description": "Shown when a setting is turned off"
-		},
-		{
-			"id": "SettingStartSolderingChar",
-			"len": 1,
-			"description": "Shown when the auto start mode is set to go straight to soldering."
-		},
-		{
-			"id": "SettingStartSleepChar",
-			"len": 1,
-			"description": "Shown when the auto start mode is set to start in sleep mode."
-
-		},
-		{
-			"id": "SettingStartSleepOffChar",
-			"len": 1,
-			"description": "Shown when the auto start state is set to go to an off state, but on movement wake into soldering mode."
-
-		},
-		{
-			"id": "SettingStartNoneChar",
-			"len": 1,
-			"description": "Shown when autostart state is to do nothing and go to a normal boot"
-		},
-		{
-			"id": "SettingSensitivityOff",
-			"len": 1,
-			"description": "Shown when a sensitivity (hall effect sensor) is disabled. Turning off the sensor."
-
-		},
-		{
-			"id": "SettingSensitivityLow",
-			"len": 1,
-			"description": "Shown when a sensitivity (hall effect) is not very sensitive"
-		},
-		{
-			"id": "SettingSensitivityMedium",
-			"len": 1,
-			"description": "Shown when a sensitivity (hall effect) is average sensitive"
-		},
-		{
-			"id": "SettingSensitivityHigh",
-			"len": 1,
-			"description": "Shown when a sensitivity (hall effect) is highly sensitive"
-		},
-		{
-			"id": "SettingLockDisableChar",
-			"len": 1,
-			"default": "D",
-			"description": "Shown when locking mode is turned off."
-
-		},
-		{
-			"id": "SettingLockBoostChar",
-			"len": 1,
-			"default": "B",
-			"description": "Shown when the locking mode is set to lock all buttons except for boost mode."
-		},
-		{
-			"id": "SettingLockFullChar",
-			"len": 1,
-			"default": "F",
-			"description": "Shown when the locking mode is set to lock all buttons."
-		}
-	],
-	"menuGroups": [
-		{
-			"id": "PowerMenu",
-			"maxLen": 5,
-			"maxLen2": 11,
-			"description": "Menu for settings related to power. Main settings to do with the input voltage."
-		},
-		{
-			"id": "SolderingMenu",
-			"maxLen": 5,
-			"maxLen2": 11,
-			"description": "Settings for soldering mode, such as boost temps, the increment used when pressing buttons and if button locking is enabled."
-		},
-		{
-			"id": "PowerSavingMenu",
-			"maxLen": 5,
-			"maxLen2": 11,
-			"description": "Settings to do with power saving, such as sleep mode, sleep temps, and shutdown modes."
-		},
-		{
-			"id": "UIMenu",
-			"maxLen": 5,
-			"maxLen2": 11,
-			"description": "User interface related settings, such as units."
-
-		},
-		{
-			"id": "AdvancedMenu",
-			"maxLen": 5,
-			"maxLen2": 11,
-			"description": "Advanced settings. Misc catchall for settings that don't fit anywhere else or settings that require some thought before use."
-		}
-	],
-	"menuOptions": [
-		{
-			"id": "DCInCutoff",
-			"maxLen": 5,
-			"maxLen2": 11,
-			"description": "When the device is powered by a battery, this adjusts the low voltage threshold for when the unit should turn off the heater to protect the battery."
-		},
-		{
-			"id": "SleepTemperature",
-			"maxLen": 4,
-			"maxLen2": 9,
-			"description": "Temperature the device will drop down to while asleep. Typically around halfway between off and soldering temperature."
-		},
-		{
-			"id": "SleepTimeout",
-			"maxLen": 4,
-			"maxLen2": 9,
-			"description": "How long of a period without movement / button-pressing is required before the device drops down to the sleep temperature."
-
-		},
-		{
-			"id": "ShutdownTimeout",
-			"maxLen": 5,
-			"maxLen2": 11,
-			"description": "How long of a period without movement / button-pressing is required before the device turns off the tip heater completely and returns to the main idle screen."
-
-		},
-		{
-			"id": "MotionSensitivity",
-			"maxLen": 6,
-			"maxLen2": 13,
-			"description": "Scale of how sensitive the device is to movement. Higher numbers == more sensitive. 0 == motion detection turned off."
-		},
-		{
-			"id": "TemperatureUnit",
-			"maxLen": 6,
-			"maxLen2": 13,
-			"description": "If the device shows temperatures in °C or °F."
-
-		},
-		{
-			"id": "AdvancedIdle",
-			"maxLen": 6,
-			"maxLen2": 13,
-			"description": "Should the device show an 'advanced' view on the idle screen. The advanced view uses text to show more details than the typical icons."
-		},
-		{
-			"id": "DisplayRotation",
-			"maxLen": 6,
-			"maxLen2": 13,
-			"description": "If the display should rotate automatically or if it should be fixed for left- or right-handed mode."
-
-		},
-		{
-			"id": "BoostTemperature",
-			"maxLen": 4,
-			"maxLen2": 9,
-			"description": "When the unit is in soldering mode. You can hold down the button at the front of the device to temporarily override the soldering temperature to this value. This SETS the temperature, it does not ADD to it."
-		},
-		{
-			"id": "AutoStart",
-			"maxLen": 6,
-			"maxLen2": 13,
-			"description": "When the device powers up, should it enter into a special mode. These settings set it to either start into soldering mode, sleeping mode or auto mode (Enters into soldering mode on the first movement)."
-
-		},
-		{
-			"id": "CooldownBlink",
-			"maxLen": 6,
-			"maxLen2": 13,
-			"description": "If the idle screen should blink the tip temperature for attention while the tip is over 50°C. Intended as a 'tip is still hot' warning."
-
-		},
-		{
-			"id": "TemperatureCalibration",
-			"maxLen": 8,
-			"maxLen2": 15,
-			"description": "Used to calibrate the ADC+Op-amp offsets for the tip. This calibration must be performed when the tip temperature and the handle temperature are equal. Generally not required unless your device is reading more than 5°C off target."
-
-		},
-		{
-			"id": "SettingsReset",
-			"maxLen": 8,
-			"maxLen2": 15,
-			"description": "Resets all settings and calibrations to factory defaults. Does NOT erase custom user boot up logo's."
-		},
-		{
-			"id": "VoltageCalibration",
-			"maxLen": 8,
-			"maxLen2": 15,
-			"description": "Enters an adjustment mode where you can gradually adjust the measured voltage to compensate for any unit-to-unit variance in the voltage sense resistors."
-		},
-		{
-			"id": "AdvancedSoldering",
-			"maxLen": 6,
-			"maxLen2": 13,
-			"description": "Should the device show an 'advanced' soldering view. This is a text-based view that shows more information at the cost of no nice graphics."
-		},
-		{
-			"id": "ScrollingSpeed",
-			"maxLen": 6,
-			"maxLen2": 11,
-			"description": "How fast the description text scrolls when hovering on a menu. Faster speeds may induce tearing, but allow reading the whole description faster."
-
-		},
-		{
-			"id": "QCMaxVoltage",
-			"maxLen": 8,
-			"maxLen2": 15,
-			"description": "This adjusts the maximum voltage the QC negotiation will adjust to. Does NOT affect USB-PD. Should be set safely based on the current rating of your power supply."
-		},
-		{
-			"id": "PDNegTimeout",
-			"maxLen": 8,
-			"maxLen2": 15,
-			"description": "How long until firmware stops trying to negotiate for USB-PD and tries QC instead. Longer times may help dodgy / old PD adapters, faster times move onto PD quickly. Units of 100ms. Recommended to keep small values."
-
-		},
-
-		{
-			"id": "PowerLimit",
-			"maxLen": 5,
-			"maxLen2": 11,
-			"description": "Allows setting a custom wattage for the device to aim to keep the AVERAGE power below. The unit can't control its peak power no matter how you set this. (Except for MHP30 which will regulate nicely to this). If USB-PD is in use, the limit will be set to the lower of this and the supplies advertised wattage."
-
-		},
-		{
-			"id": "ReverseButtonTempChange",
-			"maxLen": 6,
-			"maxLen2": 15,
-			"description": "Swaps which button increments and decrements on temperature change screens."
-		},
-		{
-			"id": "TempChangeShortStep",
-			"maxLen": 8,
-			"maxLen2": 15,
-			"description": "Factor by which the temperature is changed with a quick press of the buttons."
-
-		},
-		{
-			"id": "TempChangeLongStep",
-			"maxLen": 6,
-			"maxLen2": 15,
-			"description": "Factor by which the temperature is changed with a hold of the buttons."
-
-		},
-		{
-			"id": "PowerPulsePower",
-			"maxLen": 6,
-			"maxLen2": 15,
-			"description": "Enables and sets the wattage of the power pulse. Power pulse causes the device to briefly turn on the heater to draw power to avoid power banks going to sleep."
-
-		},
-		{
-			"id": "HallEffSensitivity",
-			"maxLen": 6,
-			"maxLen2": 8,
-			"description": "If the unit has a hall effect sensor (Pinecil), this adjusts how sensitive it is at detecting a magnet to put the device into sleep mode."
-
-		},
-		{
-			"id": "LockingMode",
-			"maxLen": 6,
-			"maxLen2": 13,
-			"description": "If locking the buttons against accidental presses is enabled."
-		},
-		{
-			"id": "MinVolCell",
-			"maxLen": 4,
-			"maxLen2": 9,
-			"description": "When powered by a battery, this adjusts the minimum voltage per cell before shutdown. (This is multiplied by the cell count.)"
-		},
-		{
-			"id": "AnimLoop",
-			"maxLen": 6,
-			"maxLen2": 13,
-			"description": "Should the menu animations loop. Only visible if the animation speed is not set to \"Off\""
-		},
-		{
-			"id": "AnimSpeed",
-			"maxLen": 6,
-			"maxLen2": 13,
-			"description": "How fast should the menu animations loop, or if they should not loop at all."
-		},
-		{
-			"id": "PowerPulseWait",
-			"maxLen": 6,
-			"maxLen2": 13,
-			"description": "Adjusts the time interval between power pulses. Longer gaps reduce undesired heating of the tip, but needs to be fast enough to keep your power bank awake."
-		},
-		{
-			"id": "PowerPulseDuration",
-			"maxLen": 6,
-			"maxLen2": 13,
-			"description": "How long should the power pulse go for. Some power banks require seeing the power draw be sustained for a certain duration to keep awake. Should be kept as short as possible to avoid wasting power / undesired heating of the tip."
-		},
-		{
-			"id": "LanguageSwitch",
-			"maxLen": 7,
-			"maxLen2": 15,
-			"description": "Changes the device language on multi-lingual builds."
-		},
-		{
-			"id": "Brightness",
-			"maxLen": 7,
-			"maxLen2": 15,
-			"description": "Display brightness. Higher values age the OLED faster due to burn-in. (However, it is notable that most of these screens die from other causes first.)"
-		},
-		{
-			"id": "ColourInversion",
-			"maxLen": 7,
-			"maxLen2": 15,
-			"description": "Inverts the entire OLED."
-		},
-		{
-			"id": "LOGOTime",
-			"maxLen": 7,
-			"maxLen2": 15,
-			"description": "Sets the duration for the boot logo (S=seconds)."
-		}
-	]
-}
+var def = ///
+    {
+        "messages": [{
+                "id": "SettingsCalibrationWarning",
+                "description": "Confirmation message shown before performing an offset calibration. Should warn the user to make sure tip and handle are at the same temperature."
+            },
+            {
+                "id": "CJCCalibrating",
+                "description": "Message indicating CJC is being calibrated."
+            },
+            {
+                "id": "SettingsResetWarning",
+                "description": "Warning shown before confirming a settings reset."
+            },
+            {
+                "id": "UVLOWarningString",
+                "maxLen": 8,
+                "description": "Warning text shown when the unit turns off due to undervoltage in simple mode."
+            },
+            {
+                "id": "UndervoltageString",
+                "maxLen": 15,
+                "description": "Warning text shown when the unit turns off due to undervoltage in advanced mode."
+            },
+            {
+                "id": "InputVoltageString",
+                "maxLen": 11,
+                "note": "Preferably end with a space",
+                "description": "Prefix text for 'Input Voltage' shown before showing the input voltage reading."
+            },
+            {
+                "id": "SleepingSimpleString",
+                "maxLen": 4,
+                "description": "The text shown to indicate the unit is in sleep mode when the advanced view is NOT on."
+            },
+            {
+                "id": "SleepingAdvancedString",
+                "maxLen": 15,
+                "description": "The text shown to indicate the unit is in sleep mode when the advanced view is turned on."
+            },
+            {
+                "id": "SleepingTipAdvancedString",
+                "maxLen": 6,
+                "description": "The prefix text shown before tip temperature when the unit is sleeping with advanced view on."
+            },
+            {
+                "id": "OffString",
+                "maxLen": 3,
+                "description": "Shown when a setting is turned off."
+            },
+            {
+                "id": "DeviceFailedValidationWarning",
+                "default": "Device may be\ncounterfeit",
+                "description": "Warning shown if the device may be a clone or counterfeit unit."
+            }
+        ],
+        "messagesWarn": [{
+                "id": "CJCCalibrationDone",
+                "description": "Confirmation message indicating CJC calibration is complete."
+            },
+            {
+                "id": "ResetOKMessage",
+                "description": "Confirmation message shown after a successful settings-reset."
+            },
+            {
+                "id": "SettingsResetMessage",
+                "description": "Shown after a firmware update when certain settings have been reset to factory defaults due to incompatible firmware changes."
+            },
+            {
+                "id": "NoAccelerometerMessage",
+                "description": "No accelerometer could be communicated with. This means that either the device's accelerometer is broken or unknown to IronOS. All motion-based settings are disabled and motion-based features will not work."
+            },
+            {
+                "id": "NoPowerDeliveryMessage",
+                "description": "The IC required for USB-PD could not be communicated with. This is an error warning that USB-PD WILL NOT FUNCTION. Generally indicative of either a hardware or software issues."
+            },
+            {
+                "id": "LockingKeysString",
+                "description": "Shown when keys are locked"
+            },
+            {
+                "id": "UnlockingKeysString",
+                "description": "Shown when keys are unlocked"
+            },
+            {
+                "id": "WarningKeysLockedString",
+                "description": "Warning that is shown when input is ignored due to the key lock being on"
+            },
+            {
+                "id": "WarningThermalRunaway",
+                "description": "Warning text shown when the software has disabled the heater as a safety precaution as the temperature reading didn't react as expected."
+            }
+        ],
+        "characters": [{
+                "id": "SettingRightChar",
+                "len": 1,
+                "description": "Shown for fixed Right-handed display rotation."
+            },
+            {
+                "id": "SettingLeftChar",
+                "len": 1,
+                "description": "Shown for fixed Left-handed display rotation."
+            },
+            {
+                "id": "SettingAutoChar",
+                "len": 1,
+                "description": "Shown for automatic display rotation."
+            },
+            {
+                "id": "SettingFastChar",
+                "len": 1,
+                "description": "Shown when a setting is set to a fast value i.e. animation speed"
+            },
+            {
+                "id": "SettingSlowChar",
+                "len": 1,
+                "description": "Shown when a setting is set to a slow value i.e. animation speed"
+            },
+            {
+                "id": "SettingMediumChar",
+                "len": 1,
+                "description": "Shown when a setting is set to a medium value i.e. animation speed"
+            },
+            {
+                "id": "SettingOffChar",
+                "len": 1,
+                "description": "Shown when a setting is turned off"
+            },
+            {
+                "id": "SettingStartSolderingChar",
+                "len": 1,
+                "description": "Shown when the auto start mode is set to go straight to soldering."
+            },
+            {
+                "id": "SettingStartSleepChar",
+                "len": 1,
+                "description": "Shown when the auto start mode is set to start in sleep mode."
+            },
+            {
+                "id": "SettingStartSleepOffChar",
+                "len": 1,
+                "description": "Shown when the auto start state is set to go to an off state, but on movement wake into soldering mode."
+            },
+            {
+                "id": "SettingStartNoneChar",
+                "len": 1,
+                "description": "Shown when autostart state is to do nothing and go to a normal boot"
+            },
+            {
+                "id": "SettingSensitivityOff",
+                "len": 1,
+                "description": "Shown when a sensitivity (hall effect sensor) is disabled. Turning off the sensor."
+            },
+            {
+                "id": "SettingSensitivityLow",
+                "len": 1,
+                "description": "Shown when a sensitivity (hall effect) is not very sensitive"
+            },
+            {
+                "id": "SettingSensitivityMedium",
+                "len": 1,
+                "description": "Shown when a sensitivity (hall effect) is average sensitive"
+            },
+            {
+                "id": "SettingSensitivityHigh",
+                "len": 1,
+                "description": "Shown when a sensitivity (hall effect) is highly sensitive"
+            },
+            {
+                "id": "SettingLockDisableChar",
+                "len": 1,
+                "default": "D",
+                "description": "Shown when locking mode is turned off."
+            },
+            {
+                "id": "SettingLockBoostChar",
+                "len": 1,
+                "default": "B",
+                "description": "Shown when the locking mode is set to lock all buttons except for boost mode."
+            },
+            {
+                "id": "SettingLockFullChar",
+                "len": 1,
+                "default": "F",
+                "description": "Shown when the locking mode is set to lock all buttons."
+            }
+        ],
+        "menuGroups": [{
+                "id": "PowerMenu",
+                "maxLen": 5,
+                "maxLen2": 11,
+                "description": "Menu for settings related to power. Main settings to do with the input voltage."
+            },
+            {
+                "id": "SolderingMenu",
+                "maxLen": 5,
+                "maxLen2": 11,
+                "description": "Settings for soldering mode, such as boost temps, the increment used when pressing buttons and if button locking is enabled."
+            },
+            {
+                "id": "PowerSavingMenu",
+                "maxLen": 5,
+                "maxLen2": 11,
+                "description": "Settings to do with power saving, such as sleep mode, sleep temps, and shutdown modes."
+            },
+            {
+                "id": "UIMenu",
+                "maxLen": 5,
+                "maxLen2": 11,
+                "description": "User interface related settings, such as units."
+            },
+            {
+                "id": "AdvancedMenu",
+                "maxLen": 5,
+                "maxLen2": 11,
+                "description": "Advanced settings. Misc catchall for settings that don't fit anywhere else or settings that require some thought before use."
+            }
+        ],
+        "menuOptions": [{
+                "id": "DCInCutoff",
+                "maxLen": 5,
+                "maxLen2": 11,
+                "description": "When the device is powered by a battery, this adjusts the low voltage threshold for when the unit should turn off the heater to protect the battery."
+            },
+            {
+                "id": "MinVolCell",
+                "maxLen": 4,
+                "maxLen2": 9,
+                "description": "When powered by a battery, this adjusts the minimum voltage per cell before shutdown. (This is multiplied by the cell count.)"
+            },
+            {
+                "id": "QCMaxVoltage",
+                "maxLen": 8,
+                "maxLen2": 15,
+                "description": "This adjusts the maximum voltage the QC negotiation will adjust to. Does NOT affect USB-PD. Should be set safely based on the current rating of your power supply."
+            },
+            {
+                "id": "PDNegTimeout",
+                "maxLen": 8,
+                "maxLen2": 15,
+                "description": "How long until firmware stops trying to negotiate for USB-PD and tries QC instead. Longer times may help dodgy / old PD adapters, faster times move onto PD quickly. Units of 100ms. Recommended to keep small values."
+            },
+            {
+                "id": "BoostTemperature",
+                "maxLen": 4,
+                "maxLen2": 9,
+                "description": "When the unit is in soldering mode. You can hold down the button at the front of the device to temporarily override the soldering temperature to this value. This SETS the temperature, it does not ADD to it."
+            },
+            {
+                "id": "AutoStart",
+                "maxLen": 6,
+                "maxLen2": 13,
+                "description": "When the device powers up, should it enter into a special mode. These settings set it to either start into soldering mode, sleeping mode or auto mode (Enters into soldering mode on the first movement)."
+            },
+            {
+                "id": "TempChangeShortStep",
+                "maxLen": 8,
+                "maxLen2": 15,
+                "description": "Factor by which the temperature is changed with a quick press of the buttons."
+            },
+            {
+                "id": "TempChangeLongStep",
+                "maxLen": 6,
+                "maxLen2": 15,
+                "description": "Factor by which the temperature is changed with a hold of the buttons."
+            },
+            {
+                "id": "LockingMode",
+                "maxLen": 6,
+                "maxLen2": 13,
+                "description": "If locking the buttons against accidental presses is enabled."
+            },
+            {
+                "id": "MotionSensitivity",
+                "maxLen": 6,
+                "maxLen2": 13,
+                "description": "Scale of how sensitive the device is to movement. Higher numbers == more sensitive. 0 == motion detection turned off."
+            },
+            {
+                "id": "SleepTemperature",
+                "maxLen": 4,
+                "maxLen2": 9,
+                "description": "Temperature the device will drop down to while asleep. Typically around halfway between off and soldering temperature."
+            },
+            {
+                "id": "SleepTimeout",
+                "maxLen": 4,
+                "maxLen2": 9,
+                "description": "How long of a period without movement / button-pressing is required before the device drops down to the sleep temperature."
+            },
+            {
+                "id": "ShutdownTimeout",
+                "maxLen": 5,
+                "maxLen2": 11,
+                "description": "How long of a period without movement / button-pressing is required before the device turns off the tip heater completely and returns to the main idle screen."
+            },
+            {
+                "id": "HallEffSensitivity",
+                "maxLen": 6,
+                "maxLen2": 13,
+                "description": "If the unit has a hall effect sensor (Pinecil), this adjusts how sensitive it is at detecting a magnet to put the device into sleep mode."
+            },
+            {
+                "id": "TemperatureUnit",
+                "maxLen": 6,
+                "maxLen2": 13,
+                "description": "If the device shows temperatures in °C or °F."
+            },
+            {
+                "id": "DisplayRotation",
+                "maxLen": 6,
+                "maxLen2": 13,
+                "description": "If the display should rotate automatically or if it should be fixed for left- or right-handed mode."
+            },
+            {
+                "id": "CooldownBlink",
+                "maxLen": 6,
+                "maxLen2": 13,
+                "description": "If the idle screen should blink the tip temperature for attention while the tip is over 50°C. Intended as a 'tip is still hot' warning."
+            },
+            {
+                "id": "ScrollingSpeed",
+                "maxLen": 6,
+                "maxLen2": 11,
+                "description": "How fast the description text scrolls when hovering on a menu. Faster speeds may induce tearing, but allow reading the whole description faster."
+            },
+            {
+                "id": "ReverseButtonTempChange",
+                "maxLen": 6,
+                "maxLen2": 15,
+                "description": "Swaps which button increments and decrements on temperature change screens."
+            },
+            {
+                "id": "AnimSpeed",
+                "maxLen": 6,
+                "maxLen2": 13,
+                "description": "How fast should the menu animations loop, or if they should not loop at all."
+            },
+            {
+                "id": "AnimLoop",
+                "maxLen": 6,
+                "maxLen2": 13,
+                "description": "Should the menu animations loop. Only visible if the animation speed is not set to \"Off\""
+            },
+            {
+                "id": "Brightness",
+                "maxLen": 7,
+                "maxLen2": 15,
+                "description": "Display brightness. Higher values age the OLED faster due to burn-in. (However, it is notable that most of these screens die from other causes first.)"
+            },
+            {
+                "id": "ColourInversion",
+                "maxLen": 7,
+                "maxLen2": 15,
+                "description": "Inverts the entire OLED."
+            },
+            {
+                "id": "LOGOTime",
+                "maxLen": 7,
+                "maxLen2": 15,
+                "description": "Sets the duration for the boot logo (s=seconds)."
+            },
+            {
+                "id": "AdvancedIdle",
+                "maxLen": 6,
+                "maxLen2": 13,
+                "description": "Should the device show an 'advanced' view on the idle screen. The advanced view uses text to show more details than the typical icons."
+            },
+            {
+                "id": "AdvancedSoldering",
+                "maxLen": 6,
+                "maxLen2": 13,
+                "description": "Should the device show an 'advanced' soldering view. This is a text-based view that shows more information at the cost of no nice graphics."
+            },
+            {
+                "id": "PowerLimit",
+                "maxLen": 5,
+                "maxLen2": 11,
+                "description": "Allows setting a custom wattage for the device to aim to keep the AVERAGE power below. The unit can't control its peak power no matter how you set this. (Except for MHP30 which will regulate nicely to this). If USB-PD is in use, the limit will be set to the lower of this and the supplies advertised wattage."
+            },
+            {
+                "id": "CalibrateCJC",
+                "maxLen": 8,
+                "maxLen2": 15,
+                "description": "Used to calibrate the ADC+Op-amp offsets for the tip. This calibration must be performed when the tip temperature and the handle temperature are equal. Generally not required unless your device is reading more than 5°C off target."
+            },
+            {
+                "id": "VoltageCalibration",
+                "maxLen": 8,
+                "maxLen2": 15,
+                "description": "Enters an adjustment mode where you can gradually adjust the measured voltage to compensate for any unit-to-unit variance in the voltage sense resistors."
+            },
+            {
+                "id": "PowerPulsePower",
+                "maxLen": 6,
+                "maxLen2": 15,
+                "description": "Enables and sets the wattage of the power pulse. Power pulse causes the device to briefly turn on the heater to draw power to avoid power banks going to sleep."
+            },
+            {
+                "id": "PowerPulseWait",
+                "maxLen": 6,
+                "maxLen2": 13,
+                "description": "Adjusts the time interval between power pulses. Longer gaps reduce undesired heating of the tip, but needs to be fast enough to keep your power bank awake."
+            },
+            {
+                "id": "PowerPulseDuration",
+                "maxLen": 6,
+                "maxLen2": 13,
+                "description": "How long should the power pulse go for. Some power banks require seeing the power draw be sustained for a certain duration to keep awake. Should be kept as short as possible to avoid wasting power / undesired heating of the tip."
+            },
+            {
+                "id": "SettingsReset",
+                "maxLen": 8,
+                "maxLen2": 15,
+                "description": "Resets all settings and calibrations to factory defaults. Does NOT erase custom user boot up logo's."
+            },
+            {
+                "id": "LanguageSwitch",
+                "maxLen": 7,
+                "maxLen2": 15,
+                "description": "Changes the device language on multi-lingual builds."
+            }
+        ]
+    }

mkdocs.yml

@@ -0,0 +1,30 @@
+site_name: IronOS
+site_url: https://ralim.github.io/IronOS/
+repo_url: https://github.com/ralim/IronOS/
+site_description: "IronOS Open Source Soldering Iron firmware for Miniware and Pinecil"
+docs_dir: Documentation
+nav:
+  - Home: index.md
+  - Getting Started: GettingStarted.md
+  - Flashing the firmware:
+      - MHP30: Flashing/MHP30.md
+      - Pinecil V1: Flashing/Pinecil V1.md
+      - Pinecil V2: Flashing/Pinecil V2.md
+      - TS80(P): Flashing/TS80(P).md
+      - TS100: Flashing/TS100.md
+  - Operation:
+      - Main Menu: Menu.md
+      - Settings: Settings.md
+      - Debug Menu: DebugMenu.md
+      - Power: Power.md
+      - Temperature: Temperature.md
+  - Startup Logo: Logo.md
+  - Hardware:
+      - Hall Sensor (Pinecil): HallSensor.md
+      - Hardware Notes: Hardware.md
+      - Troubleshooting: Troubleshooting.md
+      - Known Hardware Issues: HardwareIssues.md
+  - Translations: Translation.md
+  - Development: Development.md
+
+theme: readthedocs

source/Core/BSP/BSP.h

@@ -74,6 +74,14 @@ void log_system_state(int32_t PWMWattsx10);
 // Returns true if the tip is disconnected
 bool isTipDisconnected();
 
+// Return hardware unique ID if possible
+uint64_t getDeviceID();
+
+// If device has burned in validation code's, return the code
+uint32_t getDeviceValidation();
+// If device validation passes returns 0
+uint8_t getDeviceValidationStatus();
+
 // Status LED controls
 
 enum StatusLED {
@@ -86,6 +94,11 @@ enum StatusLED {
 };
 void setStatusLED(const enum StatusLED state);
 
+// preStartChecks are run until they return 0
+// By the PID, after each ADC sample comes in
+// For example, on the MHP30 this is used to figure out the resistance of the hotplate
+uint8_t preStartChecks();
+uint8_t preStartChecksDone();
 #ifdef __cplusplus
 }
 #endif

source/Core/BSP/BSP_Flash.h

@@ -17,7 +17,7 @@ extern "C" {
  */
 
 // Erase the flash, then save the buffer. Returns 1 if worked
-uint8_t flash_save_buffer(const uint8_t *buffer, const uint16_t length);
+void flash_save_buffer(const uint8_t *buffer, const uint16_t length);
 
 void flash_read_buffer(uint8_t *buffer, const uint16_t length);
 #ifdef __cplusplus

source/Core/BSP/BSP_Power.h

@@ -16,6 +16,11 @@ extern "C" {
 // Can be used to check any details for the power system
 void power_check();
 
+// Returns the tip resistance in x10 ohms, so 7.5 = 75; 14=140 etc
+uint8_t getTipResistanceX10();
+
+uint8_t getTipThermalMass();
+
 #ifdef __cplusplus
 }
 #endif

source/Core/BSP/MHP30/BSP.cpp

@@ -13,18 +13,20 @@
 #include <IRQ.h>
 
 WS2812<GPIOA_BASE, WS2812_Pin, 1> ws2812;
-volatile uint16_t                 PWMSafetyTimer = 0;
-volatile uint8_t                  pendingPWM     = 0;
-uint16_t                          totalPWM       = 255;
-const uint16_t                    powerPWM       = 255;
+volatile uint16_t                 PWMSafetyTimer            = 0;
+volatile uint8_t                  pendingPWM                = 0;
+uint16_t                          totalPWM                  = 255;
+const uint16_t                    powerPWM                  = 255;
+uint16_t                          tipSenseResistancex10Ohms = 0;
+volatile bool                     tipMeasurementOccuring    = false;
+history<uint16_t, PID_TIM_HZ>     rawTempFilter             = {{0}, 0, 0};
 
-history<uint16_t, PID_TIM_HZ> rawTempFilter = {{0}, 0, 0};
-void                          resetWatchdog() { HAL_IWDG_Refresh(&hiwdg); }
+void resetWatchdog() { HAL_IWDG_Refresh(&hiwdg); }
 
 #ifdef TEMP_NTC
 // Lookup table for the NTC
 // Stored as ADCReading,Temp in degC
-static const uint16_t NTCHandleLookup[] = {
+static const int32_t NTCHandleLookup[] = {
     // ADC Reading , Temp in Cx10
     808,   1600, //
     832,   1590, //
@@ -208,7 +210,8 @@ uint16_t getHandleTemperature(uint8_t sample) {
 uint16_t getTipInstantTemperature() { return getADC(2); }
 
 uint16_t getTipRawTemp(uint8_t refresh) {
-  if (refresh) {
+  if (refresh && (tipMeasurementOccuring == false)) {
+
     uint16_t lastSample = getTipInstantTemperature();
     rawTempFilter.update(lastSample);
     return lastSample;
@@ -348,69 +351,82 @@ void setPlatePullup(bool pullingUp) {
   HAL_GPIO_Init(PLATE_SENSOR_PULLUP_GPIO_Port, &GPIO_InitStruct);
 }
 
-uint16_t tipSenseResistancex10Ohms = 0;
-bool     isTipDisconnected() {
-  static bool       lastTipDisconnectedState = true;
-  static uint16_t   adcReadingPD1Set         = 0;
-  static TickType_t lastMeas                 = 0;
+void performTipMeasurementStep(bool start) {
+  static uint16_t   adcReadingPD1Set = 0;
+  static TickType_t lastMeas         = 0;
+  // Inter state that performs the steps to measure the resistor on the tip
+  // Return 1 if a measurement is ongoing
+
+  // We want to perform our startup measurements of the tip resistance until we detect one fitted
+
+  // Step 1; if not setup, we turn on pullup and then wait
+  if (tipMeasurementOccuring == false && (start || tipSenseResistancex10Ohms == 0 || lastMeas == 0)) {
+    tipMeasurementOccuring    = true;
+    tipSenseResistancex10Ohms = 0;
+    lastMeas                  = xTaskGetTickCount();
+    adcReadingPD1Set          = 0;
+    setPlatePullup(true);
+    return;
+  }
+
+  // Wait 100ms for settle time
+  if ((xTaskGetTickCount() - lastMeas) < (TICKS_100MS)) {
+    return;
+  }
+
+  lastMeas = xTaskGetTickCount();
+  // We are sensing the resistance
+  if (adcReadingPD1Set == 0) {
+    // We will record the reading for PD1 being set
+    adcReadingPD1Set = getADC(3);
+    setPlatePullup(false);
+    return;
+  }
+  // Taking reading two
+  uint16_t adcReadingPD1Cleared = getADC(3);
+  uint32_t a                    = ((int)adcReadingPD1Set - (int)adcReadingPD1Cleared);
+  a *= 10000;
+  uint32_t b = ((int)adcReadingPD1Cleared + (32768 - (int)adcReadingPD1Set));
+  if (b) {
+    tipSenseResistancex10Ohms = a / b;
+  } else {
+    tipSenseResistancex10Ohms = adcReadingPD1Set = lastMeas = 0;
+  }
+  if (tipSenseResistancex10Ohms > 1100 || tipSenseResistancex10Ohms < 900) {
+    tipSenseResistancex10Ohms = 0; // out of range
+    adcReadingPD1Set          = 0;
+    lastMeas                  = 0;
+    return;
+  }
+  tipMeasurementOccuring = false;
+}
+bool isTipDisconnected() {
+  static bool lastDisconnectedState = false;
   // For the MHP30 we want to include a little extra logic in here
   // As when the tip is first connected we want to measure the ~100 ohm resistor on the base of the tip
   // And likewise if its removed we want to clear that measurement
   /*
    * plate_sensor_res = ((adc5_value_PD1_set - adc5_value_PD1_cleared) / (adc5_value_PD1_cleared + 4096 - adc5_value_PD1_set)) * 1000.0;
    * */
-
-  bool tipDisconnected = getADC(2) > (4090 * 8);
-  // We have to handle here that this ^ will trip while measuring the gain resistor
-  if (xTaskGetTickCount() - lastMeas < (TICKS_100MS * 2 + (TICKS_100MS / 2))) {
-    tipDisconnected = false;
+  if (tipMeasurementOccuring) {
+    performTipMeasurementStep(false);
+    return true; // We fake no tip disconnection during the measurement cycle to mask it
   }
 
-  if (tipDisconnected != lastTipDisconnectedState) {
-    if (tipDisconnected) {
-      // Tip is now disconnected
-      tipSenseResistancex10Ohms = 0; // zero out the resistance
-      adcReadingPD1Set          = 0;
-      lastMeas                  = 0;
-    }
-    lastTipDisconnectedState = tipDisconnected;
+  // If we are too close to the top, most likely disconnected tip
+  bool tipDisconnected = getTipInstantTemperature() > (4090 * 8);
+  if (tipDisconnected == false && lastDisconnectedState == true) {
+    // Tip is now disconnected
+    performTipMeasurementStep(true);
   }
-  if (!tipDisconnected) {
-    if (tipSenseResistancex10Ohms == 0) {
-      if (lastMeas == 0) {
-        lastMeas = xTaskGetTickCount();
-        setPlatePullup(true);
-      } else if (xTaskGetTickCount() - lastMeas > (TICKS_100MS)) {
-        lastMeas = xTaskGetTickCount();
-        // We are sensing the resistance
-        if (adcReadingPD1Set == 0) {
-          // We will record the reading for PD1 being set
-          adcReadingPD1Set = getADC(3);
-          setPlatePullup(false);
-        } else {
-          // We have taken reading one
-          uint16_t adcReadingPD1Cleared = getADC(3);
-          uint32_t a                    = ((int)adcReadingPD1Set - (int)adcReadingPD1Cleared);
-          a *= 10000;
-          uint32_t b = ((int)adcReadingPD1Cleared + (32768 - (int)adcReadingPD1Set));
-          if (b) {
-            tipSenseResistancex10Ohms = a / b;
-          } else {
-            tipSenseResistancex10Ohms = adcReadingPD1Set = lastMeas = 0;
-          }
-          if (tipSenseResistancex10Ohms > 1100 || tipSenseResistancex10Ohms < 900) {
-            tipSenseResistancex10Ohms = 0; // out of range
-            adcReadingPD1Set          = 0;
-            lastMeas                  = 0;
-          }
-        }
-      }
-      return true; // we fake tip being disconnected until this is measured
-    }
-  }
-
+  lastDisconnectedState = tipDisconnected;
   return tipDisconnected;
 }
+
+uint8_t preStartChecks() {
+  performTipMeasurementStep(false);
+  return tipMeasurementOccuring ? 0 : 1;
+}
 void setBuzzer(bool on) {
   if (on) {
     htim3.Instance->CCR2 = 128;
@@ -455,3 +471,11 @@ void setStatusLED(const enum StatusLED state) {
     setBuzzer(false);
   }
 }
+uint64_t getDeviceID() {
+  //
+  return HAL_GetUIDw0() | ((uint64_t)HAL_GetUIDw1() << 32);
+}
+
+uint8_t preStartChecksDone() { return 1; }
+
+uint8_t getTipThermalMass() { return TIP_THERMAL_MASS; }

source/Core/BSP/MHP30/Power.cpp

@@ -17,3 +17,5 @@ void power_check() {
 }
 
 bool getIsPoweredByDCIN() { return false; }
+
+uint8_t getTipResistanceX10() { return TIP_RESISTANCE; }

source/Core/BSP/MHP30/ThermoModel.cpp

@@ -10,7 +10,8 @@
 #include "configuration.h"
 extern uint16_t tipSenseResistancex10Ohms;
 uint32_t        TipThermoModel::convertuVToDegC(uint32_t tipuVDelta) {
-  // For the MHP30, we are mimicing the original code and using the resistor fitted to the base of the heater head, this is measured in the isTipDisconnected() function
+  // For the MHP30, we are mimicing the original code and using the resistor fitted to the base of the heater head,
+  // this is measured at boot in pid task and in the disconnected tip check if tip is removed
   if (tipSenseResistancex10Ohms > 900 && tipSenseResistancex10Ohms <= 1100) {
     int32_t a = ((tipSenseResistancex10Ohms / 10) + 300) * (3300000 - tipuVDelta);
     int32_t b = a / 1000000;

source/Core/BSP/MHP30/Vendor/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.c

@@ -175,11 +175,11 @@
  * @retval None
  */
 void HAL_GPIO_Init(GPIO_TypeDef *GPIOx, GPIO_InitTypeDef *GPIO_Init) {
-  uint32_t position = 0x00u;
-  uint32_t ioposition;
-  uint32_t iocurrent;
-  uint32_t temp;
-  uint32_t config = 0x00u;
+  uint32_t       position = 0x00u;
+  uint32_t       ioposition;
+  uint32_t       iocurrent;
+  uint32_t       temp;
+  uint32_t       config = 0x00u;
   __IO uint32_t *configregister; /* Store the address of CRL or CRH register based on pin number */
   uint32_t       registeroffset; /* offset used during computation of CNF and MODE bits placement inside CRL or CRH register */
 
@@ -326,9 +326,9 @@ void HAL_GPIO_Init(GPIO_TypeDef *GPIOx, GPIO_InitTypeDef *GPIO_Init) {
  * @retval None
  */
 void HAL_GPIO_DeInit(GPIO_TypeDef *GPIOx, uint32_t GPIO_Pin) {
-  uint32_t position = 0x00u;
-  uint32_t iocurrent;
-  uint32_t tmp;
+  uint32_t       position = 0x00u;
+  uint32_t       iocurrent;
+  uint32_t       tmp;
   __IO uint32_t *configregister; /* Store the address of CRL or CRH register based on pin number */
   uint32_t       registeroffset;
 

source/Core/BSP/MHP30/configuration.h

@@ -74,6 +74,9 @@
 #define POWER_PULSE_WAIT_MAX     9   // 9*2.5s = 22.5 seconds
 #define POWER_PULSE_DURATION_MAX 9   // 9*250ms = 2.25 seconds
 
+#define ADC_MAX_READING (4096 * 8) // Maximum reading of the adc
+#define ADC_VDD_MV      3300       // ADC max reading millivolts
+
 #ifdef MODEL_TS100
 #define POWER_PULSE_DEFAULT 0
 #else
@@ -139,13 +142,17 @@
 #define MIN_BOOST_TEMP_F       300                     // The min settable temp for boost mode °F
 #define NO_DISPLAY_ROTATE                              // Disable OLED rotation by accel
 #define SLEW_LIMIT             50                      // Limit to 3.0 Watts per 64ms pid loop update rate slew rate
+
+#define ACCEL_SC7
 #define ACCEL_MSA
+
 #define POW_PD 1
 #define TEMP_NTC
 #define I2C_SOFT
 #define BATTFILTERDEPTH 8
 #define OLED_I2CBB
 #define ACCEL_EXITS_ON_MOVEMENT
+#define NEEDS_VBUS_PROBE 0
 
 #define HARDWARE_MAX_WATTAGE_X10 650
 #define TIP_THERMAL_MASS         65 // TODO, needs refinement
@@ -157,4 +164,4 @@
 #endif
 #endif
 
-#define FLASH_LOGOADDR (0x08000000 + (62 * 1024))
+#define FLASH_LOGOADDR (0x08000000 + (62 * 1024))

source/Core/BSP/MHP30/flash.c

@@ -10,14 +10,15 @@
 #include "stm32f1xx_hal.h"
 #include "string.h"
 
-static uint16_t settings_page[512] __attribute__((section(".settings_page")));
+#define SETTINGS_START_PAGE (0x08000000 + (127 * 1024))
 
-uint8_t flash_save_buffer(const uint8_t *buffer, const uint16_t length) {
+
+void flash_save_buffer(const uint8_t *buffer, const uint16_t length) {
   FLASH_EraseInitTypeDef pEraseInit;
   pEraseInit.TypeErase    = FLASH_TYPEERASE_PAGES;
   pEraseInit.Banks        = FLASH_BANK_1;
   pEraseInit.NbPages      = 1;
-  pEraseInit.PageAddress  = (uint32_t)settings_page;
+  pEraseInit.PageAddress  = (uint32_t)SETTINGS_START_PAGE;
   uint32_t failingAddress = 0;
   resetWatchdog();
   __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP | FLASH_FLAG_WRPERR | FLASH_FLAG_PGERR | FLASH_FLAG_BSY);
@@ -32,13 +33,9 @@ uint8_t flash_save_buffer(const uint8_t *buffer, const uint16_t length) {
   HAL_FLASH_Unlock();
   for (uint16_t i = 0; i < (length / 2); i++) {
     resetWatchdog();
-    HAL_FLASH_Program(FLASH_TYPEPROGRAM_HALFWORD, (uint32_t)&settings_page[i], data[i]);
+    HAL_FLASH_Program(FLASH_TYPEPROGRAM_HALFWORD, SETTINGS_START_PAGE+ (i*sizeof(uint16_t)), data[i]);
   }
   HAL_FLASH_Lock();
-  return 1;
 }
 
-void flash_read_buffer(uint8_t *buffer, const uint16_t length) {
-  memset(buffer, 0, length);
-  memcpy(buffer, settings_page, length);
-}
+void flash_read_buffer(uint8_t *buffer, const uint16_t length) { memcpy(buffer, (uint8_t*)SETTINGS_START_PAGE, length); }

source/Core/BSP/MHP30/portmacro.h

@@ -27,7 +27,8 @@
 
 #ifndef PORTMACRO_H
 #define PORTMACRO_H
-
+#include "FreeRTOSConfig.h"
+#include "projdefs.h"
 #ifdef __cplusplus
 extern "C" {
 #endif

source/Core/BSP/MHP30/stm32f103.ld

@@ -116,17 +116,6 @@ SECTIONS
     _edata = .;        /* define a global symbol at data end */
   } >RAM AT> ROM
 
-  .logo_page (NOLOAD) :
-  {
-    . = ABSOLUTE(__FLASH_END_ADDR__ - 2048);
-    KEEP (*(.logo_page*))
-  } > ROM
-
-  .settings_page (NOLOAD) :
-  {
-    . = ABSOLUTE(__FLASH_END_ADDR__ - 1024);
-    KEEP (*(.settings_page*))
-  } > ROM
 
   .bss :
   {

source/Core/BSP/Miniware/BSP.cpp

@@ -29,66 +29,29 @@ void resetWatchdog() { HAL_IWDG_Refresh(&hiwdg); }
 static const uint16_t NTCHandleLookup[] = {
     // ADC Reading , Temp in C
     29189, 0,  //
-    29014, 1,  //
     28832, 2,  //
-    28644, 3,  //
     28450, 4,  //
-    28249, 5,  //
     28042, 6,  //
-    27828, 7,  //
     27607, 8,  //
-    27380, 9,  //
     27146, 10, //
-    26906, 11, //
     26660, 12, //
-    26407, 13, //
     26147, 14, //
-    25882, 15, //
     25610, 16, //
-    25332, 17, //
     25049, 18, //
-    24759, 19, //
     24465, 20, //
-    24164, 21, //
     23859, 22, //
-    23549, 23, //
     23234, 24, //
-    22915, 25, //
     22591, 26, //
-    22264, 27, //
     21933, 28, //
-    21599, 29, //
     21261, 30, //
-    20921, 31, //
     20579, 32, //
-    20234, 33, //
     19888, 34, //
-    19541, 35, //
     19192, 36, //
-    18843, 37, //
     18493, 38, //
-    18143, 39, //
     17793, 40, //
-    17444, 41, //
     17096, 42, //
-    16750, 43, //
     16404, 44, //
     16061, 45, //
-               //		15719, 46, //
-               //		15380, 47, //
-               //		15044, 48, //
-               //		14710, 49, //
-               //		14380, 50, //
-               //		14053, 51, //
-               //		13729, 52, //
-               //		13410, 53, //
-               //		13094, 54, //
-               //		12782, 55, //
-               //		12475, 56, //
-               //		12172, 57, //
-               //		11874, 58, //
-               //		11580, 59, //
-               //		11292, 60, //
 };
 #endif
 
@@ -282,4 +245,15 @@ bool isTipDisconnected() {
   return tipTemp > tipDisconnectedThres;
 }
 
-void setStatusLED(const enum StatusLED state) {}
+void     setStatusLED(const enum StatusLED state) {}
+uint8_t  preStartChecks() { return 1; }
+uint64_t getDeviceID() {
+  //
+  return HAL_GetUIDw0() | ((uint64_t)HAL_GetUIDw1() << 32);
+}
+
+uint8_t getTipResistanceX10() { return TIP_RESISTANCE; }
+
+uint8_t preStartChecksDone() { return 1; }
+
+uint8_t getTipThermalMass() { return TIP_THERMAL_MASS; }

source/Core/BSP/Miniware/FreeRTOSConfig.h

@@ -100,7 +100,7 @@ extern uint32_t SystemCoreClock;
 #define configUSE_IDLE_HOOK                     1
 #define configUSE_TICK_HOOK                     0
 #define configCPU_CLOCK_HZ                      (SystemCoreClock)
-#define configTICK_RATE_HZ                      ((TickType_t)1000)
+#define configTICK_RATE_HZ                      (1000)
 #define configMAX_PRIORITIES                    (6)
 #define configMINIMAL_STACK_SIZE                ((uint16_t)256)
 #define configTOTAL_HEAP_SIZE                   ((size_t)1024 * 14) /*Currently use about 9000*/

source/Core/BSP/Miniware/Pins.h

@@ -6,119 +6,87 @@
  */
 
 #ifndef BSP_MINIWARE_PINS_H_
-#define BSP_MINIWARE_PINS_H_
-#include "configuration.h"
+  #define BSP_MINIWARE_PINS_H_
+  #include "configuration.h"
 
-#ifdef MODEL_TS100
+  #ifdef MODEL_TS100
 
-#define KEY_B_Pin                 GPIO_PIN_6
-#define KEY_B_GPIO_Port           GPIOA
-#define TMP36_INPUT_Pin           GPIO_PIN_7
-#define TMP36_INPUT_GPIO_Port     GPIOA
-#define TMP36_ADC1_CHANNEL        ADC_CHANNEL_7
-#define TMP36_ADC2_CHANNEL        ADC_CHANNEL_7
-#define TIP_TEMP_Pin              GPIO_PIN_0
-#define TIP_TEMP_GPIO_Port        GPIOB
-#define TIP_TEMP_ADC1_CHANNEL     ADC_CHANNEL_8
-#define TIP_TEMP_ADC2_CHANNEL     ADC_CHANNEL_8
-#define VIN_Pin                   GPIO_PIN_1
-#define VIN_GPIO_Port             GPIOB
-#define VIN_ADC1_CHANNEL          ADC_CHANNEL_9
-#define VIN_ADC2_CHANNEL          ADC_CHANNEL_9
-#define OLED_RESET_Pin            GPIO_PIN_8
-#define OLED_RESET_GPIO_Port      GPIOA
-#define KEY_A_Pin                 GPIO_PIN_9
-#define KEY_A_GPIO_Port           GPIOA
-#define INT_Orientation_Pin       GPIO_PIN_3
-#define INT_Orientation_GPIO_Port GPIOB
-#define PWM_Out_Pin               GPIO_PIN_4
-#define PWM_Out_GPIO_Port         GPIOB
-#define PWM_Out_CHANNEL           TIM_CHANNEL_1
-#define PWM_Out_CCR
-#define INT_Movement_Pin       GPIO_PIN_5
-#define INT_Movement_GPIO_Port GPIOB
-#define SCL_Pin                GPIO_PIN_6
-#define SCL_GPIO_Port          GPIOB
-#define SDA_Pin                GPIO_PIN_7
-#define SDA_GPIO_Port          GPIOB
-#endif
-#ifdef MODEL_TS80
-// TS80 pin map
-#define KEY_B_Pin             GPIO_PIN_0
-#define KEY_B_GPIO_Port       GPIOB
-#define TMP36_INPUT_Pin       GPIO_PIN_4
-#define TMP36_INPUT_GPIO_Port GPIOA
-#define TMP36_ADC1_CHANNEL    ADC_CHANNEL_4
-#define TMP36_ADC2_CHANNEL    ADC_CHANNEL_4
-#define TIP_TEMP_Pin          GPIO_PIN_3
-#define TIP_TEMP_GPIO_Port    GPIOA
-#define TIP_TEMP_ADC1_CHANNEL ADC_CHANNEL_3
-#define TIP_TEMP_ADC2_CHANNEL ADC_CHANNEL_3
+    #define KEY_B_Pin                 GPIO_PIN_6
+    #define KEY_B_GPIO_Port           GPIOA
+    #define TMP36_INPUT_Pin           GPIO_PIN_7
+    #define TMP36_INPUT_GPIO_Port     GPIOA
+    #define TMP36_ADC1_CHANNEL        ADC_CHANNEL_7
+    #define TMP36_ADC2_CHANNEL        ADC_CHANNEL_7
+    #define TIP_TEMP_Pin              GPIO_PIN_0
+    #define TIP_TEMP_GPIO_Port        GPIOB
+    #define TIP_TEMP_ADC1_CHANNEL     ADC_CHANNEL_8
+    #define TIP_TEMP_ADC2_CHANNEL     ADC_CHANNEL_8
+    #define VIN_Pin                   GPIO_PIN_1
+    #define VIN_GPIO_Port             GPIOB
+    #define VIN_ADC1_CHANNEL          ADC_CHANNEL_9
+    #define VIN_ADC2_CHANNEL          ADC_CHANNEL_9
+    #define OLED_RESET_Pin            GPIO_PIN_8
+    #define OLED_RESET_GPIO_Port      GPIOA
+    #define KEY_A_Pin                 GPIO_PIN_9
+    #define KEY_A_GPIO_Port           GPIOA
+    #define INT_Orientation_Pin       GPIO_PIN_3
+    #define INT_Orientation_GPIO_Port GPIOB
+    #define PWM_Out_Pin               GPIO_PIN_4
+    #define PWM_Out_GPIO_Port         GPIOB
+    #define PWM_Out_CHANNEL           TIM_CHANNEL_1
+    #define PWM_Out_CCR
+    #define INT_Movement_Pin          GPIO_PIN_5
+    #define INT_Movement_GPIO_Port    GPIOB
+    #define SCL_Pin                   GPIO_PIN_6
+    #define SCL_GPIO_Port             GPIOB
+    #define SDA_Pin                   GPIO_PIN_7
+    #define SDA_GPIO_Port             GPIOB
+  #endif
 
-#define VIN_Pin                   GPIO_PIN_2
-#define VIN_GPIO_Port             GPIOA
-#define VIN_ADC1_CHANNEL          ADC_CHANNEL_2
-#define VIN_ADC2_CHANNEL          ADC_CHANNEL_2
-#define OLED_RESET_Pin            GPIO_PIN_15
-#define OLED_RESET_GPIO_Port      GPIOA
-#define KEY_A_Pin                 GPIO_PIN_1
-#define KEY_A_GPIO_Port           GPIOB
-#define INT_Orientation_Pin       GPIO_PIN_4
-#define INT_Orientation_GPIO_Port GPIOB
-#define PWM_Out_Pin               GPIO_PIN_6
-#define PWM_Out_GPIO_Port         GPIOA
-#define PWM_Out_CHANNEL           TIM_CHANNEL_1
-#define INT_Movement_Pin          GPIO_PIN_5
-#define INT_Movement_GPIO_Port    GPIOB
-#define SCL_Pin                   GPIO_PIN_6
-#define SCL_GPIO_Port             GPIOB
-#define SDA_Pin                   GPIO_PIN_7
-#define SDA_GPIO_Port             GPIOB
-#define SCL2_Pin                  GPIO_PIN_5
-#define SCL2_GPIO_Port            GPIOA
-#define SDA2_Pin                  GPIO_PIN_1
-#define SDA2_GPIO_Port            GPIOA
+  #if defined(MODEL_TS80) + defined(MODEL_TS80P) > 0
+  // TS80 & TS80P pin map
+    #define KEY_B_Pin                 GPIO_PIN_0
+    #define KEY_B_GPIO_Port           GPIOB
+    #define TMP36_INPUT_Pin           GPIO_PIN_4
+    #define TMP36_INPUT_GPIO_Port     GPIOA
+    #define TMP36_ADC1_CHANNEL        ADC_CHANNEL_4
+    #define TMP36_ADC2_CHANNEL        ADC_CHANNEL_4
+    #define TIP_TEMP_Pin              GPIO_PIN_3
+    #define TIP_TEMP_GPIO_Port        GPIOA
+    #define TIP_TEMP_ADC1_CHANNEL     ADC_CHANNEL_3
+    #define TIP_TEMP_ADC2_CHANNEL     ADC_CHANNEL_3
 
-#endif
-#ifdef MODEL_TS80P
-// TS80P pin map
-#define KEY_B_Pin             GPIO_PIN_0
-#define KEY_B_GPIO_Port       GPIOB
-#define TMP36_INPUT_Pin       GPIO_PIN_4
-#define TMP36_INPUT_GPIO_Port GPIOA
-#define TMP36_ADC1_CHANNEL    ADC_CHANNEL_4
-#define TMP36_ADC2_CHANNEL    ADC_CHANNEL_4
-#define TIP_TEMP_Pin          GPIO_PIN_3
-#define TIP_TEMP_GPIO_Port    GPIOA
-#define TIP_TEMP_ADC1_CHANNEL ADC_CHANNEL_3
-#define TIP_TEMP_ADC2_CHANNEL ADC_CHANNEL_3
+    #define VIN_Pin                   GPIO_PIN_2
+    #define VIN_GPIO_Port             GPIOA
+    #define VIN_ADC1_CHANNEL          ADC_CHANNEL_2
+    #define VIN_ADC2_CHANNEL          ADC_CHANNEL_2
+    #define OLED_RESET_Pin            GPIO_PIN_15
+    #define OLED_RESET_GPIO_Port      GPIOA
+    #define KEY_A_Pin                 GPIO_PIN_1
+    #define KEY_A_GPIO_Port           GPIOB
+    #define INT_Orientation_Pin       GPIO_PIN_4
+    #define INT_Orientation_GPIO_Port GPIOB
+    #define PWM_Out_Pin               GPIO_PIN_6
+    #define PWM_Out_GPIO_Port         GPIOA
+    #define PWM_Out_CHANNEL           TIM_CHANNEL_1
+    #define INT_Movement_Pin          GPIO_PIN_5
+    #define INT_Movement_GPIO_Port    GPIOB
+    #define SCL_Pin                   GPIO_PIN_6
+    #define SCL_GPIO_Port             GPIOB
+    #define SDA_Pin                   GPIO_PIN_7
+    #define SDA_GPIO_Port             GPIOB
+    #define SCL2_Pin                  GPIO_PIN_5
+    #define SCL2_GPIO_Port            GPIOA
+    #define SDA2_Pin                  GPIO_PIN_1
+    #define SDA2_GPIO_Port            GPIOA
 
-#define VIN_Pin                   GPIO_PIN_2
-#define VIN_GPIO_Port             GPIOA
-#define VIN_ADC1_CHANNEL          ADC_CHANNEL_2
-#define VIN_ADC2_CHANNEL          ADC_CHANNEL_2
-#define OLED_RESET_Pin            GPIO_PIN_15
-#define OLED_RESET_GPIO_Port      GPIOA
-#define KEY_A_Pin                 GPIO_PIN_1
-#define KEY_A_GPIO_Port           GPIOB
-#define INT_Orientation_Pin       GPIO_PIN_4
-#define INT_Orientation_GPIO_Port GPIOB
-#define PWM_Out_Pin               GPIO_PIN_6
-#define PWM_Out_GPIO_Port         GPIOA
-#define PWM_Out_CHANNEL           TIM_CHANNEL_1
-#define INT_Movement_Pin          GPIO_PIN_5
-#define INT_Movement_GPIO_Port    GPIOB
-#define SCL_Pin                   GPIO_PIN_6
-#define SCL_GPIO_Port             GPIOB
-#define SDA_Pin                   GPIO_PIN_7
-#define SDA_GPIO_Port             GPIOB
-#define SCL2_Pin                  GPIO_PIN_5
-#define SCL2_GPIO_Port            GPIOA
-#define SDA2_Pin                  GPIO_PIN_1
-#define SDA2_GPIO_Port            GPIOA
-#define INT_PD_Pin                GPIO_PIN_9
-#define INT_PD_GPIO_Port          GPIOA
+  #endif
 
-#endif
+  #ifdef MODEL_TS80P
+  // TS80P pin map
+    #define INT_PD_Pin                GPIO_PIN_9
+    #define INT_PD_GPIO_Port          GPIOA
+  
+  #endif
 
 #endif /* BSP_MINIWARE_PINS_H_ */

source/Core/BSP/Miniware/Power.cpp

@@ -22,11 +22,7 @@ void power_check() {
 }
 
 bool getIsPoweredByDCIN() {
-#ifdef MODEL_TS80
-  return false;
-#endif
-
-#ifdef MODEL_TS80P
+#if defined(MODEL_TS80) + defined(MODEL_TS80P) > 0
   return false;
 #endif
 

source/Core/BSP/Miniware/ThermoModel.cpp

@@ -9,7 +9,7 @@
 #include "configuration.h"
 
 #ifdef TEMP_uV_LOOKUP_HAKKO
-const uint16_t uVtoDegC[] = {
+const int32_t uVtoDegC[] = {
     //
     //
     0,     0,   //
@@ -69,7 +69,7 @@ const uint16_t uVtoDegC[] = {
 
 #ifdef TEMP_uV_LOOKUP_TS80
 
-const uint16_t uVtoDegC[] = {
+const int32_t uVtoDegC[] = {
     //
     //
     530,   0,   //

source/Core/BSP/Miniware/Vendor/CMSIS/Include/cmsis_gcc.h

@@ -124,7 +124,7 @@ __attribute__((always_inline)) __STATIC_INLINE uint32_t __get_xPSR(void) {
   \return               PSP Register value
  */
 __attribute__((always_inline)) __STATIC_INLINE uint32_t __get_PSP(void) {
-  register uint32_t result;
+  uint32_t result;
 
   __ASM volatile("MRS %0, psp\n" : "=r"(result));
   return (result);
@@ -143,7 +143,7 @@ __attribute__((always_inline)) __STATIC_INLINE void __set_PSP(uint32_t topOfProc
   \return               MSP Register value
  */
 __attribute__((always_inline)) __STATIC_INLINE uint32_t __get_MSP(void) {
-  register uint32_t result;
+  uint32_t result;
 
   __ASM volatile("MRS %0, msp\n" : "=r"(result));
   return (result);

source/Core/BSP/Miniware/Vendor/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h

@@ -310,6 +310,9 @@ void                HAL_ResumeTick(void);
 uint32_t            HAL_GetHalVersion(void);
 uint32_t            HAL_GetREVID(void);
 uint32_t            HAL_GetDEVID(void);
+uint32_t            HAL_GetUIDw0(void);
+uint32_t            HAL_GetUIDw1(void);
+uint32_t            HAL_GetUIDw2(void);
 void                HAL_DBGMCU_EnableDBGSleepMode(void);
 void                HAL_DBGMCU_DisableDBGSleepMode(void);
 void                HAL_DBGMCU_EnableDBGStopMode(void);

source/Core/BSP/Miniware/Vendor/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_adc.h

@@ -278,8 +278,8 @@ typedef struct {
 #define ADC_CHANNEL_16 ((uint32_t)(ADC_SQR3_SQ1_4))
 #define ADC_CHANNEL_17 ((uint32_t)(ADC_SQR3_SQ1_4 | ADC_SQR3_SQ1_0))
 
-#define ADC_CHANNEL_TEMPSENSOR ADC_CHANNEL_16 /* ADC internal channel (no connection on device pin) */
-#define ADC_CHANNEL_VREFINT    ADC_CHANNEL_17 /* ADC internal channel (no connection on device pin) */
+// #define ADC_CHANNEL_TEMPSENSOR ADC_CHANNEL_16 /* ADC internal channel (no connection on device pin) */
+// #define ADC_CHANNEL_VREFINT    ADC_CHANNEL_17 /* ADC internal channel (no connection on device pin) */
 /**
  * @}
  */
@@ -812,10 +812,6 @@ uint32_t HAL_ADC_GetValue(ADC_HandleTypeDef *hadc);
 
 /* ADC IRQHandler and Callbacks used in non-blocking modes (Interruption and DMA) */
 void HAL_ADC_IRQHandler(ADC_HandleTypeDef *hadc);
-void HAL_ADC_ConvCpltCallback(ADC_HandleTypeDef *hadc);
-void HAL_ADC_ConvHalfCpltCallback(ADC_HandleTypeDef *hadc);
-void HAL_ADC_LevelOutOfWindowCallback(ADC_HandleTypeDef *hadc);
-void HAL_ADC_ErrorCallback(ADC_HandleTypeDef *hadc);
 /**
  * @}
  */
@@ -852,8 +848,6 @@ HAL_StatusTypeDef ADC_Enable(ADC_HandleTypeDef *hadc);
 HAL_StatusTypeDef ADC_ConversionStop_Disable(ADC_HandleTypeDef *hadc);
 void              ADC_StabilizationTime(uint32_t DelayUs);
 void              ADC_DMAConvCplt(DMA_HandleTypeDef *hdma);
-void              ADC_DMAHalfConvCplt(DMA_HandleTypeDef *hdma);
-void              ADC_DMAError(DMA_HandleTypeDef *hdma);
 /**
  * @}
  */

source/Core/BSP/Miniware/Vendor/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_i2c.h

@@ -232,8 +232,8 @@ typedef struct {
 /** @defgroup I2C_addressing_mode I2C addressing mode
  * @{
  */
-#define I2C_ADDRESSINGMODE_7BIT  0x00004000U
-#define I2C_ADDRESSINGMODE_10BIT (I2C_OAR1_ADDMODE | 0x00004000U)
+#define I2C_ADDRESSINGMODE_7BIT 0x00004000U
+// #define I2C_ADDRESSINGMODE_10BIT (I2C_OAR1_ADDMODE | 0x00004000U)
 /**
  * @}
  */
@@ -307,17 +307,17 @@ typedef struct {
 /** @defgroup I2C_Flag_definition I2C Flag definition
  * @{
  */
-#define I2C_FLAG_SMBALERT   0x00018000U
-#define I2C_FLAG_TIMEOUT    0x00014000U
-#define I2C_FLAG_PECERR     0x00011000U
-#define I2C_FLAG_OVR        0x00010800U
-#define I2C_FLAG_AF         0x00010400U
-#define I2C_FLAG_ARLO       0x00010200U
-#define I2C_FLAG_BERR       0x00010100U
-#define I2C_FLAG_TXE        0x00010080U
-#define I2C_FLAG_RXNE       0x00010040U
-#define I2C_FLAG_STOPF      0x00010010U
-#define I2C_FLAG_ADD10      0x00010008U
+#define I2C_FLAG_SMBALERT 0x00018000U
+#define I2C_FLAG_TIMEOUT  0x00014000U
+#define I2C_FLAG_PECERR   0x00011000U
+#define I2C_FLAG_OVR      0x00010800U
+#define I2C_FLAG_AF       0x00010400U
+#define I2C_FLAG_ARLO     0x00010200U
+#define I2C_FLAG_BERR     0x00010100U
+#define I2C_FLAG_TXE      0x00010080U
+#define I2C_FLAG_RXNE     0x00010040U
+#define I2C_FLAG_STOPF    0x00010010U
+// #define I2C_FLAG_ADD10      0x00010008U
 #define I2C_FLAG_BTF        0x00010004U
 #define I2C_FLAG_ADDR       0x00010002U
 #define I2C_FLAG_SB         0x00010001U

source/Core/BSP/Miniware/Vendor/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.c

@@ -513,6 +513,24 @@ void HAL_GetUID(uint32_t *UID) {
   UID[2] = (uint32_t)(READ_REG(*((uint32_t *)(UID_BASE + 8U))));
 }
 
+/**
+ * @brief  Returns first word of the unique device identifier (UID based on 96 bits)
+ * @retval Device identifier
+ */
+uint32_t HAL_GetUIDw0(void) { return (READ_REG(*((uint32_t *)UID_BASE))); }
+
+/**
+ * @brief  Returns second word of the unique device identifier (UID based on 96 bits)
+ * @retval Device identifier
+ */
+uint32_t HAL_GetUIDw1(void) { return (READ_REG(*((uint32_t *)(UID_BASE + 4U)))); }
+
+/**
+ * @brief  Returns third word of the unique device identifier (UID based on 96 bits)
+ * @retval Device identifier
+ */
+uint32_t HAL_GetUIDw2(void) { return (READ_REG(*((uint32_t *)(UID_BASE + 8U)))); }
+
 /**
  * @}
  */

source/Core/BSP/Miniware/Vendor/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_adc.c

@@ -1194,11 +1194,6 @@ HAL_StatusTypeDef HAL_ADC_Start_DMA(ADC_HandleTypeDef *hadc, uint32_t *pData, ui
       /* Set the DMA transfer complete callback */
       hadc->DMA_Handle->XferCpltCallback = ADC_DMAConvCplt;
 
-      /* Set the DMA half transfer complete callback */
-      hadc->DMA_Handle->XferHalfCpltCallback = ADC_DMAHalfConvCplt;
-
-      /* Set the DMA error callback */
-      hadc->DMA_Handle->XferErrorCallback = ADC_DMAError;
 
       /* Manage ADC and DMA start: ADC overrun interruption, DMA start, ADC   */
       /* start (in case of SW start):                                         */
@@ -1357,8 +1352,6 @@ void HAL_ADC_IRQHandler(ADC_HandleTypeDef *hadc) {
         }
       }
 
-      /* Conversion complete callback */
-      HAL_ADC_ConvCpltCallback(hadc);
 
       /* Clear regular group conversion flag */
       __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_STRT | ADC_FLAG_EOC);
@@ -1401,73 +1394,10 @@ void HAL_ADC_IRQHandler(ADC_HandleTypeDef *hadc) {
     }
   }
 
-  /* ========== Check Analog watchdog flags ========== */
-  if (__HAL_ADC_GET_IT_SOURCE(hadc, ADC_IT_AWD)) {
-    if (__HAL_ADC_GET_FLAG(hadc, ADC_FLAG_AWD)) {
-      /* Set ADC state */
-      SET_BIT(hadc->State, HAL_ADC_STATE_AWD1);
 
-      /* Level out of window callback */
-      HAL_ADC_LevelOutOfWindowCallback(hadc);
-
-      /* Clear the ADC analog watchdog flag */
-      __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_AWD);
-    }
-  }
 }
 
-/**
- * @brief  Conversion complete callback in non blocking mode
- * @param  hadc: ADC handle
- * @retval None
- */
-__weak void HAL_ADC_ConvCpltCallback(ADC_HandleTypeDef *hadc) {
-  /* Prevent unused argument(s) compilation warning */
-  UNUSED(hadc);
-  /* NOTE : This function should not be modified. When the callback is needed,
-            function HAL_ADC_ConvCpltCallback must be implemented in the user file.
-   */
-}
 
-/**
- * @brief  Conversion DMA half-transfer callback in non blocking mode
- * @param  hadc: ADC handle
- * @retval None
- */
-__weak void HAL_ADC_ConvHalfCpltCallback(ADC_HandleTypeDef *hadc) {
-  /* Prevent unused argument(s) compilation warning */
-  UNUSED(hadc);
-  /* NOTE : This function should not be modified. When the callback is needed,
-            function HAL_ADC_ConvHalfCpltCallback must be implemented in the user file.
-  */
-}
-
-/**
- * @brief  Analog watchdog callback in non blocking mode.
- * @param  hadc: ADC handle
- * @retval None
- */
-__weak void HAL_ADC_LevelOutOfWindowCallback(ADC_HandleTypeDef *hadc) {
-  /* Prevent unused argument(s) compilation warning */
-  UNUSED(hadc);
-  /* NOTE : This function should not be modified. When the callback is needed,
-            function HAL_ADC_LevelOutOfWindowCallback must be implemented in the user file.
-  */
-}
-
-/**
- * @brief  ADC error callback in non blocking mode
- *        (ADC conversion with interruption or transfer by DMA)
- * @param  hadc: ADC handle
- * @retval None
- */
-__weak void HAL_ADC_ErrorCallback(ADC_HandleTypeDef *hadc) {
-  /* Prevent unused argument(s) compilation warning */
-  UNUSED(hadc);
-  /* NOTE : This function should not be modified. When the callback is needed,
-            function HAL_ADC_ErrorCallback must be implemented in the user file.
-  */
-}
 
 /**
  * @}
@@ -1509,7 +1439,6 @@ __weak void HAL_ADC_ErrorCallback(ADC_HandleTypeDef *hadc) {
  */
 HAL_StatusTypeDef HAL_ADC_ConfigChannel(ADC_HandleTypeDef *hadc, ADC_ChannelConfTypeDef *sConfig) {
   HAL_StatusTypeDef tmp_hal_status  = HAL_OK;
-  __IO uint32_t     wait_loop_index = 0U;
 
   /* Check the parameters */
   assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance));
@@ -1543,32 +1472,7 @@ HAL_StatusTypeDef HAL_ADC_ConfigChannel(ADC_HandleTypeDef *hadc, ADC_ChannelConf
     MODIFY_REG(hadc->Instance->SMPR2, ADC_SMPR2(ADC_SMPR2_SMP0, sConfig->Channel), ADC_SMPR2(sConfig->SamplingTime, sConfig->Channel));
   }
 
-  /* If ADC1 Channel_16 or Channel_17 is selected, enable Temperature sensor  */
-  /* and VREFINT measurement path.                                            */
-  if ((sConfig->Channel == ADC_CHANNEL_TEMPSENSOR) || (sConfig->Channel == ADC_CHANNEL_VREFINT)) {
-    /* For STM32F1 devices with several ADC: Only ADC1 can access internal    */
-    /* measurement channels (VrefInt/TempSensor). If these channels are       */
-    /* intended to be set on other ADC instances, an error is reported.       */
-    if (hadc->Instance == ADC1) {
-      if (READ_BIT(hadc->Instance->CR2, ADC_CR2_TSVREFE) == RESET) {
-        SET_BIT(hadc->Instance->CR2, ADC_CR2_TSVREFE);
-
-        if ((sConfig->Channel == ADC_CHANNEL_TEMPSENSOR)) {
-          /* Delay for temperature sensor stabilization time */
-          /* Compute number of CPU cycles to wait for */
-          wait_loop_index = (ADC_TEMPSENSOR_DELAY_US * (SystemCoreClock / 1000000U));
-          while (wait_loop_index != 0U) {
-            wait_loop_index--;
-          }
-        }
-      }
-    } else {
-      /* Update ADC state machine to error */
-      SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_CONFIG);
-
-      tmp_hal_status = HAL_ERROR;
-    }
-  }
+ 
 
   /* Process unlocked */
   __HAL_UNLOCK(hadc);
@@ -1802,45 +1706,16 @@ void ADC_DMAConvCplt(DMA_HandleTypeDef *hdma) {
       }
     }
 
-    /* Conversion complete callback */
-    HAL_ADC_ConvCpltCallback(hadc);
   } else {
     /* Call DMA error callback */
     hadc->DMA_Handle->XferErrorCallback(hdma);
   }
 }
 
-/**
- * @brief  DMA half transfer complete callback.
- * @param  hdma: pointer to DMA handle.
- * @retval None
- */
-void ADC_DMAHalfConvCplt(DMA_HandleTypeDef *hdma) {
-  /* Retrieve ADC handle corresponding to current DMA handle */
-  ADC_HandleTypeDef *hadc = (ADC_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent;
 
-  /* Half conversion callback */
-  HAL_ADC_ConvHalfCpltCallback(hadc);
-}
 
-/**
- * @brief  DMA error callback
- * @param  hdma: pointer to DMA handle.
- * @retval None
- */
-void ADC_DMAError(DMA_HandleTypeDef *hdma) {
-  /* Retrieve ADC handle corresponding to current DMA handle */
-  ADC_HandleTypeDef *hadc = (ADC_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent;
 
-  /* Set ADC state */
-  SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_DMA);
 
-  /* Set ADC error code to DMA error */
-  SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_DMA);
-
-  /* Error callback */
-  HAL_ADC_ErrorCallback(hadc);
-}
 
 /**
  * @}

source/Core/BSP/Miniware/Vendor/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_adc_ex.c

@@ -661,11 +661,6 @@ HAL_StatusTypeDef HAL_ADCEx_MultiModeStart_DMA(ADC_HandleTypeDef *hadc, uint32_t
     /* Set the DMA transfer complete callback */
     hadc->DMA_Handle->XferCpltCallback = ADC_DMAConvCplt;
 
-    /* Set the DMA half transfer complete callback */
-    hadc->DMA_Handle->XferHalfCpltCallback = ADC_DMAHalfConvCplt;
-
-    /* Set the DMA error callback */
-    hadc->DMA_Handle->XferErrorCallback = ADC_DMAError;
 
     /* Manage ADC and DMA start: ADC overrun interruption, DMA start, ADC     */
     /* start (in case of SW start):                                           */
@@ -905,7 +900,6 @@ __weak void HAL_ADCEx_InjectedConvCpltCallback(ADC_HandleTypeDef *hadc) {
  */
 HAL_StatusTypeDef HAL_ADCEx_InjectedConfigChannel(ADC_HandleTypeDef *hadc, ADC_InjectionConfTypeDef *sConfigInjected) {
   HAL_StatusTypeDef tmp_hal_status  = HAL_OK;
-  __IO uint32_t     wait_loop_index = 0U;
 
   /* Check the parameters */
   assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance));
@@ -1034,11 +1028,8 @@ HAL_StatusTypeDef HAL_ADCEx_InjectedConfigChannel(ADC_HandleTypeDef *hadc, ADC_I
     MODIFY_REG(hadc->Instance->SMPR2, ADC_SMPR2(ADC_SMPR2_SMP0, sConfigInjected->InjectedChannel), ADC_SMPR2(sConfigInjected->InjectedSamplingTime, sConfigInjected->InjectedChannel));
   }
 
-  /* If ADC1 InjectedChannel_16 or InjectedChannel_17 is selected, enable Temperature sensor  */
-  /* and VREFINT measurement path.                                            */
-  if ((sConfigInjected->InjectedChannel == ADC_CHANNEL_TEMPSENSOR) || (sConfigInjected->InjectedChannel == ADC_CHANNEL_VREFINT)) {
-    SET_BIT(hadc->Instance->CR2, ADC_CR2_TSVREFE);
-  }
+
+
 
   /* Configure the offset: offset enable/disable, InjectedChannel, offset value */
   switch (sConfigInjected->InjectedRank) {
@@ -1060,33 +1051,7 @@ HAL_StatusTypeDef HAL_ADCEx_InjectedConfigChannel(ADC_HandleTypeDef *hadc, ADC_I
     break;
   }
 
-  /* If ADC1 Channel_16 or Channel_17 is selected, enable Temperature sensor  */
-  /* and VREFINT measurement path.                                            */
-  if ((sConfigInjected->InjectedChannel == ADC_CHANNEL_TEMPSENSOR) || (sConfigInjected->InjectedChannel == ADC_CHANNEL_VREFINT)) {
-    /* For STM32F1 devices with several ADC: Only ADC1 can access internal    */
-    /* measurement channels (VrefInt/TempSensor). If these channels are       */
-    /* intended to be set on other ADC instances, an error is reported.       */
-    if (hadc->Instance == ADC1) {
-      if (READ_BIT(hadc->Instance->CR2, ADC_CR2_TSVREFE) == RESET) {
-        SET_BIT(hadc->Instance->CR2, ADC_CR2_TSVREFE);
-
-        if ((sConfigInjected->InjectedChannel == ADC_CHANNEL_TEMPSENSOR)) {
-          /* Delay for temperature sensor stabilization time */
-          /* Compute number of CPU cycles to wait for */
-          wait_loop_index = (ADC_TEMPSENSOR_DELAY_US * (SystemCoreClock / 1000000U));
-          while (wait_loop_index != 0U) {
-            wait_loop_index--;
-          }
-        }
-      }
-    } else {
-      /* Update ADC state machine to error */
-      SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_CONFIG);
-
-      tmp_hal_status = HAL_ERROR;
-    }
-  }
-
+ 
   /* Process unlocked */
   __HAL_UNLOCK(hadc);
 

source/Core/BSP/Miniware/Vendor/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.c

@@ -564,21 +564,10 @@ void HAL_DMA_IRQHandler(DMA_HandleTypeDef *hdma) {
 
   /* Half Transfer Complete Interrupt management ******************************/
   if (((flag_it & (DMA_FLAG_HT1 << hdma->ChannelIndex)) != RESET) && ((source_it & DMA_IT_HT) != RESET)) {
-    /* Disable the half transfer interrupt if the DMA mode is not CIRCULAR */
-    if ((hdma->Instance->CCR & DMA_CCR_CIRC) == 0U) {
-      /* Disable the half transfer interrupt */
-      __HAL_DMA_DISABLE_IT(hdma, DMA_IT_HT);
-    }
+
     /* Clear the half transfer complete flag */
     __HAL_DMA_CLEAR_FLAG(hdma, __HAL_DMA_GET_HT_FLAG_INDEX(hdma));
 
-    /* DMA peripheral state is not updated in Half Transfer */
-    /* but in Transfer Complete case */
-
-    if (hdma->XferHalfCpltCallback != NULL) {
-      /* Half transfer callback */
-      hdma->XferHalfCpltCallback(hdma);
-    }
   }
 
   /* Transfer Complete Interrupt management ***********************************/

source/Core/BSP/Miniware/Vendor/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.c

@@ -191,11 +191,11 @@
  * @retval None
  */
 void HAL_GPIO_Init(GPIO_TypeDef *GPIOx, GPIO_InitTypeDef *GPIO_Init) {
-  uint32_t position;
-  uint32_t ioposition = 0x00U;
-  uint32_t iocurrent  = 0x00U;
-  uint32_t temp       = 0x00U;
-  uint32_t config     = 0x00U;
+  uint32_t       position;
+  uint32_t       ioposition = 0x00U;
+  uint32_t       iocurrent  = 0x00U;
+  uint32_t       temp       = 0x00U;
+  uint32_t       config     = 0x00U;
   __IO uint32_t *configregister;      /* Store the address of CRL or CRH register based on pin number */
   uint32_t       registeroffset = 0U; /* offset used during computation of CNF and MODE bits placement inside CRL or CRH register */
 
@@ -340,9 +340,9 @@ void HAL_GPIO_Init(GPIO_TypeDef *GPIOx, GPIO_InitTypeDef *GPIO_Init) {
  * @retval None
  */
 void HAL_GPIO_DeInit(GPIO_TypeDef *GPIOx, uint32_t GPIO_Pin) {
-  uint32_t position  = 0x00U;
-  uint32_t iocurrent = 0x00U;
-  uint32_t tmp       = 0x00U;
+  uint32_t       position  = 0x00U;
+  uint32_t       iocurrent = 0x00U;
+  uint32_t       tmp       = 0x00U;
   __IO uint32_t *configregister; /* Store the address of CRL or CRH register based on pin number */
   uint32_t       registeroffset = 0U;
 

source/Core/BSP/Miniware/Vendor/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_i2c.c

@@ -309,7 +309,6 @@ static HAL_StatusTypeDef I2C_MasterTransmit_BTF(I2C_HandleTypeDef *hi2c);
 static HAL_StatusTypeDef I2C_MasterReceive_RXNE(I2C_HandleTypeDef *hi2c);
 static HAL_StatusTypeDef I2C_MasterReceive_BTF(I2C_HandleTypeDef *hi2c);
 static HAL_StatusTypeDef I2C_Master_SB(I2C_HandleTypeDef *hi2c);
-static HAL_StatusTypeDef I2C_Master_ADD10(I2C_HandleTypeDef *hi2c);
 static HAL_StatusTypeDef I2C_Master_ADDR(I2C_HandleTypeDef *hi2c);
 
 /**
@@ -957,16 +956,7 @@ HAL_StatusTypeDef HAL_I2C_Slave_Transmit(I2C_HandleTypeDef *hi2c, uint8_t *pData
     /* Clear ADDR flag */
     __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
 
-    /* If 10bit addressing mode is selected */
-    if (hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_10BIT) {
-      /* Wait until ADDR flag is set */
-      if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, RESET, Timeout, tickstart) != HAL_OK) {
-        return HAL_TIMEOUT;
-      }
-
-      /* Clear ADDR flag */
-      __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
-    }
+  
 
     while (hi2c->XferSize > 0U) {
       /* Wait until TXE flag is set */
@@ -3083,10 +3073,6 @@ void HAL_I2C_EV_IRQHandler(I2C_HandleTypeDef *hi2c) {
     if (((sr1itflags & I2C_FLAG_SB) != RESET) && ((itsources & I2C_IT_EVT) != RESET)) {
       I2C_Master_SB(hi2c);
     }
-    /* ADD10 Set -------------------------------------------------------------*/
-    else if (((sr1itflags & I2C_FLAG_ADD10) != RESET) && ((itsources & I2C_IT_EVT) != RESET)) {
-      I2C_Master_ADD10(hi2c);
-    }
     /* ADDR Set --------------------------------------------------------------*/
     else if (((sr1itflags & I2C_FLAG_ADDR) != RESET) && ((itsources & I2C_IT_EVT) != RESET)) {
       I2C_Master_ADDR(hi2c);
@@ -3731,18 +3717,6 @@ static HAL_StatusTypeDef I2C_Master_SB(I2C_HandleTypeDef *hi2c) {
   return HAL_OK;
 }
 
-/**
- * @brief  Handle ADD10 flag for Master
- * @param  hi2c Pointer to a I2C_HandleTypeDef structure that contains
- *         the configuration information for I2C module
- * @retval HAL status
- */
-static HAL_StatusTypeDef I2C_Master_ADD10(I2C_HandleTypeDef *hi2c) {
-  /* Send slave address */
-  hi2c->Instance->DR = I2C_10BIT_ADDRESS(hi2c->Devaddress);
-
-  return HAL_OK;
-}
 
 /**
  * @brief  Handle ADDR flag for Master
@@ -3760,14 +3734,6 @@ static HAL_StatusTypeDef I2C_Master_ADDR(I2C_HandleTypeDef *hi2c) {
     if ((hi2c->EventCount == 0U) && (CurrentMode == HAL_I2C_MODE_MEM)) {
       /* Clear ADDR flag */
       __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
-    } else if ((hi2c->EventCount == 0U) && (hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_10BIT)) {
-      /* Clear ADDR flag */
-      __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
-
-      /* Generate Restart */
-      hi2c->Instance->CR1 |= I2C_CR1_START;
-
-      hi2c->EventCount++;
     } else {
       if (hi2c->XferCount == 0U) {
         /* Clear ADDR flag */
@@ -3996,22 +3962,8 @@ static HAL_StatusTypeDef I2C_MasterRequestWrite(I2C_HandleTypeDef *hi2c, uint16_
   if (hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_7BIT) {
     /* Send slave address */
     hi2c->Instance->DR = I2C_7BIT_ADD_WRITE(DevAddress);
-  } else {
-    /* Send header of slave address */
-    hi2c->Instance->DR = I2C_10BIT_HEADER_WRITE(DevAddress);
-
-    /* Wait until ADD10 flag is set */
-    if (I2C_WaitOnMasterAddressFlagUntilTimeout(hi2c, I2C_FLAG_ADD10, Timeout, Tickstart) != HAL_OK) {
-      if (hi2c->ErrorCode == HAL_I2C_ERROR_AF) {
-        return HAL_ERROR;
-      } else {
-        return HAL_TIMEOUT;
-      }
-    }
-
-    /* Send slave address */
-    hi2c->Instance->DR = I2C_10BIT_ADDRESS(DevAddress);
   }
+  
 
   /* Wait until ADDR flag is set */
   if (I2C_WaitOnMasterAddressFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, Timeout, Tickstart) != HAL_OK) {
@@ -4059,45 +4011,8 @@ static HAL_StatusTypeDef I2C_MasterRequestRead(I2C_HandleTypeDef *hi2c, uint16_t
   if (hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_7BIT) {
     /* Send slave address */
     hi2c->Instance->DR = I2C_7BIT_ADD_READ(DevAddress);
-  } else {
-    /* Send header of slave address */
-    hi2c->Instance->DR = I2C_10BIT_HEADER_WRITE(DevAddress);
-
-    /* Wait until ADD10 flag is set */
-    if (I2C_WaitOnMasterAddressFlagUntilTimeout(hi2c, I2C_FLAG_ADD10, Timeout, Tickstart) != HAL_OK) {
-      if (hi2c->ErrorCode == HAL_I2C_ERROR_AF) {
-        return HAL_ERROR;
-      } else {
-        return HAL_TIMEOUT;
-      }
-    }
-
-    /* Send slave address */
-    hi2c->Instance->DR = I2C_10BIT_ADDRESS(DevAddress);
-
-    /* Wait until ADDR flag is set */
-    if (I2C_WaitOnMasterAddressFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, Timeout, Tickstart) != HAL_OK) {
-      if (hi2c->ErrorCode == HAL_I2C_ERROR_AF) {
-        return HAL_ERROR;
-      } else {
-        return HAL_TIMEOUT;
-      }
-    }
-
-    /* Clear ADDR flag */
-    __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
-
-    /* Generate Restart */
-    hi2c->Instance->CR1 |= I2C_CR1_START;
-
-    /* Wait until SB flag is set */
-    if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_SB, RESET, Timeout, Tickstart) != HAL_OK) {
-      return HAL_TIMEOUT;
-    }
-
-    /* Send header of slave address */
-    hi2c->Instance->DR = I2C_10BIT_HEADER_READ(DevAddress);
   }
+  
 
   /* Wait until ADDR flag is set */
   if (I2C_WaitOnMasterAddressFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, Timeout, Tickstart) != HAL_OK) {

source/Core/BSP/Miniware/configuration.h

@@ -114,6 +114,9 @@
 
 #define OP_AMP_GAIN_STAGE_TS80 (1 + (OP_AMP_Rf_TS80 / OP_AMP_Rin_TS80))
 
+#define ADC_MAX_READING (4096 * 8) // Maximum reading of the adc
+#define ADC_VDD_MV      3300       // ADC max reading millivolts
+
 // Deriving the Voltage div:
 // Vin_max = (3.3*(r1+r2))/(r2)
 // vdiv = (32768*4)/(vin_max*10)
@@ -123,7 +126,7 @@
 #elif defined(MODEL_TS100) + defined(MODEL_TS80) + defined(MODEL_TS80P) == 0
 #error "No model defined!"
 #endif
-
+#define NEEDS_VBUS_PROBE 0
 // Miniware is swapping IMU's around a bit now, so we turn them all on
 
 #define ACCEL_MMA
@@ -132,105 +135,77 @@
 #define ACCEL_MSA
 #define ACCEL_BMA
 
+#define MIN_CALIBRATION_OFFSET 100 // Min value for calibration
+#define SOLDERING_TEMP         320 // Default soldering temp is 320.0 °C
+#define PID_TIM_HZ             (8) // Tick rate of the PID loop
+#define MAX_TEMP_C             450 // Max soldering temp selectable °C
+#define MAX_TEMP_F             850 // Max soldering temp selectable °F
+#define MIN_TEMP_C             10  // Min soldering temp selectable °C
+#define MIN_TEMP_F             60  // Min soldering temp selectable °F
+#define MIN_BOOST_TEMP_C       250 // The min settable temp for boost mode °C
+#define MIN_BOOST_TEMP_F       480 // The min settable temp for boost mode °F
+
 #ifdef MODEL_TS100
-#define SOLDERING_TEMP         320                     // Default soldering temp is 320.0 °C
-#define VOLTAGE_DIV            467                     // 467 - Default divider from schematic
-#define CALIBRATION_OFFSET     900                     // 900 - Default adc offset in uV
-#define MIN_CALIBRATION_OFFSET 100                     // Min value for calibration
-#define PID_POWER_LIMIT        70                      // Sets the max pwm power limit
-#define POWER_LIMIT            0                       // 0 watts default limit
-#define MAX_POWER_LIMIT        70                      //
-#define POWER_LIMIT_STEPS      5                       //
-#define OP_AMP_GAIN_STAGE      OP_AMP_GAIN_STAGE_TS100 //
-#define TEMP_uV_LOOKUP_HAKKO                           //
-#define USB_PD_VMAX            20                      // Maximum voltage for PD to negotiate
-#define PID_TIM_HZ             (8)                     // Tick rate of the PID loop
-#define MAX_TEMP_C             450                     // Max soldering temp selectable °C
-#define MAX_TEMP_F             850                     // Max soldering temp selectable °F
-#define MIN_TEMP_C             10                      // Min soldering temp selectable °C
-#define MIN_TEMP_F             60                      // Min soldering temp selectable °F
-#define MIN_BOOST_TEMP_C       250                     // The min settable temp for boost mode °C
-#define MIN_BOOST_TEMP_F       480                     // The min settable temp for boost mode °F
+#define VOLTAGE_DIV        467 // 467 - Default divider from schematic
+#define CALIBRATION_OFFSET 900 // 900 - Default adc offset in uV
+#define PID_POWER_LIMIT    70  // Sets the max pwm power limit
+#define POWER_LIMIT        0   // 0 watts default limit
+#define MAX_POWER_LIMIT    70
+#define POWER_LIMIT_STEPS  5
+#define OP_AMP_GAIN_STAGE  OP_AMP_GAIN_STAGE_TS100
+#define TEMP_uV_LOOKUP_HAKKO
+#define USB_PD_VMAX 20 // Maximum voltage for PD to negotiate
+
+#define HARDWARE_MAX_WATTAGE_X10 750
+#define TIP_THERMAL_MASS         65 // X10 watts to raise 1 deg C in 1 second
+#define TIP_RESISTANCE           75 // x10 ohms, 7.5 typical for ts100 tips
+
 #define POW_DC
-
 #define POW_PD 0
-
 #define TEMP_TMP36
 #endif
 
-#ifdef MODEL_TS80
-#define SOLDERING_TEMP         320                    // Default soldering temp is 320.0 °C
-#define VOLTAGE_DIV            780                    // Default divider from schematic
-#define PID_POWER_LIMIT        24                     // Sets the max pwm power limit
-#define CALIBRATION_OFFSET     900                    // the adc offset in uV
-#define MIN_CALIBRATION_OFFSET 100                    // Min value for calibration
-#define POWER_LIMIT            24                     // 24 watts default power limit
-#define MAX_POWER_LIMIT        40                     //
-#define POWER_LIMIT_STEPS      2                      //
-#define OP_AMP_GAIN_STAGE      OP_AMP_GAIN_STAGE_TS80 //
-#define TEMP_uV_LOOKUP_TS80                           //
-#define USB_PD_VMAX            12                     // Maximum voltage for PD to negotiate
-#define PID_TIM_HZ             (8)                    // Tick rate of the PID loop
-#define MAX_TEMP_C             450                    // Max soldering temp selectable °C
-#define MAX_TEMP_F             850                    // Max soldering temp selectable °F
-#define MIN_TEMP_C             10                     // Min soldering temp selectable °C
-#define MIN_TEMP_F             60                     // Min soldering temp selectable °F
-#define MIN_BOOST_TEMP_C       250                    // The min settable temp for boost mode °C
-#define MIN_BOOST_TEMP_F       480                    // The min settable temp for boost mode °F
+#if defined(MODEL_TS80) + defined(MODEL_TS80P) > 0
+#define MAX_POWER_LIMIT   40
+#define POWER_LIMIT_STEPS 2
+#define OP_AMP_GAIN_STAGE OP_AMP_GAIN_STAGE_TS80
+#define TEMP_uV_LOOKUP_TS80
+#define USB_PD_VMAX 12 // Maximum voltage for PD to negotiate
+
+#define TIP_THERMAL_MASS 40
+#define TIP_RESISTANCE   45 // x10 ohms, 4.5 typical for ts80 tips
 
-#define POW_QC
-#define POW_PD 0
-#define TEMP_TMP36
 #define LIS_ORI_FLIP
 #define OLED_FLIP
 #endif
 
+#ifdef MODEL_TS80
+#define VOLTAGE_DIV        780 // Default divider from schematic
+#define CALIBRATION_OFFSET 900 // the adc offset in uV
+#define PID_POWER_LIMIT    24  // Sets the max pwm power limit
+#define POWER_LIMIT        24  // 24 watts default power limit
+
+#define HARDWARE_MAX_WATTAGE_X10 180
+
+#define POW_QC
+#define POW_PD 0
+#define TEMP_TMP36
+#endif
+
 #ifdef MODEL_TS80P
-#define SOLDERING_TEMP         320                    // Default soldering temp is 320.0 °C
-#define VOLTAGE_DIV            650                    // Default for TS80P with slightly different resistors
-#define PID_POWER_LIMIT        35                     // Sets the max pwm power limit
-#define CALIBRATION_OFFSET     1500                   // the adc offset in uV
-#define MIN_CALIBRATION_OFFSET 100                    // Min value for calibration
-#define POWER_LIMIT            30                     // 30 watts default power limit
-#define MAX_POWER_LIMIT        40                     //
-#define POWER_LIMIT_STEPS      2                      //
-#define OP_AMP_GAIN_STAGE      OP_AMP_GAIN_STAGE_TS80 //
-#define TEMP_uV_LOOKUP_TS80                           //
-#define USB_PD_VMAX            12                     // Maximum voltage for PD to negotiate
-#define PID_TIM_HZ             (8)                    // Tick rate of the PID loop
-#define MAX_TEMP_C             450                    // Max soldering temp selectable °C
-#define MAX_TEMP_F             850                    // Max soldering temp selectable °F
-#define MIN_TEMP_C             10                     // Min soldering temp selectable °C
-#define MIN_TEMP_F             60                     // Min soldering temp selectable °F
-#define MIN_BOOST_TEMP_C       250                    // The min settable temp for boost mode °C
-#define MIN_BOOST_TEMP_F       480                    // The min settable temp for boost mode °F
+#define VOLTAGE_DIV        650  // Default for TS80P with slightly different resistors
+#define CALIBRATION_OFFSET 1500 // the adc offset in uV
+#define PID_POWER_LIMIT    35   // Sets the max pwm power limit
+#define POWER_LIMIT        30   // 30 watts default power limit
+
+#define HARDWARE_MAX_WATTAGE_X10 300
 
 #define POW_PD 1
 #define POW_QC 1
 #define TEMP_NTC
 #define I2C_SOFT
-#define LIS_ORI_FLIP
 #define SC7_ORI_FLIP
-#define OLED_FLIP
-#endif
-
-#ifdef MODEL_TS100
-#define HARDWARE_MAX_WATTAGE_X10 750
-#define TIP_THERMAL_MASS         65 // X10 watts to raise 1 deg C in 1 second
-#define TIP_RESISTANCE           75 // x10 ohms, 7.5 typical for ts100 tips
-#endif
-
-#ifdef MODEL_TS80
-#define HARDWARE_MAX_WATTAGE_X10 180
-#define TIP_THERMAL_MASS         40
-#define TIP_RESISTANCE           45 // x10 ohms, 4.5 typical for ts80 tips
-#endif
-
-#ifdef MODEL_TS80P
-#define HARDWARE_MAX_WATTAGE_X10 300
-#define TIP_THERMAL_MASS         40
-#define TIP_RESISTANCE           45 // x10 ohms, 4.5 typical for ts80 tips
 #endif
 #endif
 
-#define FLASH_LOGOADDR (0x08000000 + (62 * 1024))
+#define FLASH_LOGOADDR (0x08000000 + (62 * 1024))

source/Core/BSP/Miniware/flash.c

@@ -10,14 +10,14 @@
 #include "stm32f1xx_hal.h"
 #include "string.h"
 
-static uint16_t settings_page[512] __attribute__((section(".settings_page")));
+#define SETTINGS_START_PAGE (0x08000000 + (63 * 1024))
 
-uint8_t flash_save_buffer(const uint8_t *buffer, const uint16_t length) {
+void flash_save_buffer(const uint8_t *buffer, const uint16_t length) {
   FLASH_EraseInitTypeDef pEraseInit;
   pEraseInit.TypeErase    = FLASH_TYPEERASE_PAGES;
   pEraseInit.Banks        = FLASH_BANK_1;
   pEraseInit.NbPages      = 1;
-  pEraseInit.PageAddress  = (uint32_t)settings_page;
+  pEraseInit.PageAddress  = (uint32_t)SETTINGS_START_PAGE;
   uint32_t failingAddress = 0;
   resetWatchdog();
   __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP | FLASH_FLAG_WRPERR | FLASH_FLAG_PGERR | FLASH_FLAG_BSY);
@@ -32,10 +32,10 @@ uint8_t flash_save_buffer(const uint8_t *buffer, const uint16_t length) {
   HAL_FLASH_Unlock();
   for (uint16_t i = 0; i < (length / 2); i++) {
     resetWatchdog();
-    HAL_FLASH_Program(FLASH_TYPEPROGRAM_HALFWORD, (uint32_t)&settings_page[i], data[i]);
+    HAL_FLASH_Program(FLASH_TYPEPROGRAM_HALFWORD, SETTINGS_START_PAGE+ (i*sizeof(uint16_t)), data[i]);
   }
   HAL_FLASH_Lock();
-  return 1;
+  
 }
 
-void flash_read_buffer(uint8_t *buffer, const uint16_t length) { memcpy(buffer, settings_page, length); }
+void flash_read_buffer(uint8_t *buffer, const uint16_t length) { memcpy(buffer, (uint8_t*)SETTINGS_START_PAGE, length); }

source/Core/BSP/Miniware/port.c

@@ -189,24 +189,27 @@ StackType_t *pxPortInitialiseStack(StackType_t *pxTopOfStack, TaskFunction_t pxC
 /*-----------------------------------------------------------*/
 
 static void prvTaskExitError(void) {
-  volatile uint32_t ulDummy = 0UL;
+  // volatile uint32_t ulDummy = 0UL;
 
-  /* A function that implements a task must not exit or attempt to return to
-   its caller as there is nothing to return to.  If a task wants to exit it
-   should instead call vTaskDelete( NULL ).
+  // /* A function that implements a task must not exit or attempt to return to
+  //  its caller as there is nothing to return to.  If a task wants to exit it
+  //  should instead call vTaskDelete( NULL ).
 
-   Artificially force an assert() to be triggered if configASSERT() is
-   defined, then stop here so application writers can catch the error. */
-  configASSERT(uxCriticalNesting == ~0UL);
-  portDISABLE_INTERRUPTS();
-  while (ulDummy == 0) {
-    /* This file calls prvTaskExitError() after the scheduler has been
-     started to remove a compiler warning about the function being defined
-     but never called.  ulDummy is used purely to quieten other warnings
-     about code appearing after this function is called - making ulDummy
-     volatile makes the compiler think the function could return and
-     therefore not output an 'unreachable code' warning for code that appears
-     after it. */
+  //  Artificially force an assert() to be triggered if configASSERT() is
+  //  defined, then stop here so application writers can catch the error. */
+  // configASSERT(uxCriticalNesting == ~0UL);
+  // portDISABLE_INTERRUPTS();
+  // while (ulDummy == 0) {
+  //   /* This file calls prvTaskExitError() after the scheduler has been
+  //    started to remove a compiler warning about the function being defined
+  //    but never called.  ulDummy is used purely to quieten other warnings
+  //    about code appearing after this function is called - making ulDummy
+  //    volatile makes the compiler think the function could return and
+  //    therefore not output an 'unreachable code' warning for code that appears
+  //    after it. */
+  // }
+  for(;;){
+    
   }
 }
 /*-----------------------------------------------------------*/

source/Core/BSP/Miniware/portmacro.h

@@ -27,6 +27,8 @@
 
 #ifndef PORTMACRO_H
 #define PORTMACRO_H
+#include "FreeRTOSConfig.h"
+#include "projdefs.h"
 
 #ifdef __cplusplus
 extern "C" {

source/Core/BSP/Miniware/stm32f103.ld

@@ -116,17 +116,6 @@ SECTIONS
     _edata = .;        /* define a global symbol at data end */
   } >RAM AT> ROM
 
-  .logo_page (NOLOAD) :
-  {
-    . = ABSOLUTE(__FLASH_END_ADDR__ - 2048);
-    KEEP (*(.logo_page*))
-  } > ROM
-
-  .settings_page (NOLOAD) :
-  {
-    . = ABSOLUTE(__FLASH_END_ADDR__ - 1024);
-    KEEP (*(.settings_page*))
-  } > ROM
 
   .bss :
   {

source/Core/BSP/Miniware/stm32f1xx_it.c

@@ -11,21 +11,6 @@ extern TIM_HandleTypeDef htim1; // used for the systick
 /*            Cortex-M3 Processor Interruption and Exception Handlers         */
 /******************************************************************************/
 
-void NMI_Handler(void) {}
-
-// We have the assembly for a breakpoint trigger here to halt the system when a debugger is connected
-// Hardfault handler, often a screwup in the code
-void HardFault_Handler(void) {}
-
-// Memory management unit had an error
-void MemManage_Handler(void) {}
-
-// Prefetcher or busfault occured
-void BusFault_Handler(void) {}
-
-void UsageFault_Handler(void) {}
-
-void DebugMon_Handler(void) {}
 
 // Systick is used by FreeRTOS tick
 void SysTick_Handler(void) { osSystickHandler(); }

source/Core/BSP/Pinecil/BSP.cpp

@@ -90,3 +90,12 @@ bool isTipDisconnected() {
 }
 
 void setStatusLED(const enum StatusLED state) {}
+
+uint8_t  preStartChecks() { return 1; }
+uint64_t getDeviceID() { return dbg_id_get(); }
+
+uint8_t getTipResistanceX10() { return TIP_RESISTANCE; }
+
+uint8_t preStartChecksDone() { return 1; }
+
+uint8_t getTipThermalMass() { return TIP_THERMAL_MASS; }