Compare commits
19 Commits
| Author | SHA1 | Date | |
|---|---|---|---|
|
718cfc4612 | ||
|
|
5a581b7a9f | ||
|
|
bbb758fd4c | ||
|
|
d4fbe99b8b | ||
|
|
c98e4126b2 | ||
|
|
c6559312f0 | ||
|
|
f4d5b8b000 | ||
|
|
65659b7b99 | ||
|
|
52e92feae7 | ||
|
98ca6784a0 | ||
|
|
f700422878 | ||
|
|
5aa27348b5 | ||
|
|
c7e2713004 | ||
|
|
4db03d5832 | ||
|
|
f355ff6c01 | ||
|
|
96bda69a0a | ||
|
|
252c98372d | ||
|
|
1ec2477033 | ||
|
|
6b21844020 |
4
.gitignore
vendored
4
.gitignore
vendored
@@ -4,7 +4,7 @@
|
||||
*.obj
|
||||
*.elf
|
||||
*.d
|
||||
|
||||
*.DS_Store
|
||||
# Precompiled Headers
|
||||
*.gch
|
||||
*.pch
|
||||
@@ -34,3 +34,5 @@
|
||||
*.su
|
||||
workspace/ts100/Debug/*
|
||||
workspace/.metadata/*
|
||||
|
||||
workspace/ts100/.settings/language.settings.xml
|
||||
|
||||
23
README.md
23
README.md
@@ -1,12 +1,21 @@
|
||||
# TS100
|
||||
Source code for the TS100 Soldering Iron
|
||||
This is a complete open source re-write of the software for the ts100 soldering iron sold by minidso
|
||||
|
||||
## UNTESTED!
|
||||
This was started to remove the need for usb for changing system settings.
|
||||
|
||||
This repository is my attempt (so far) at converting the source code for the TS100 soldering iron to the free System Workbench IDE and gcc based compilers.
|
||||
|
||||
I am also attempting to translate / comment as a go for a reference.
|
||||
|
||||
Untested on actual hardware until noted otherwise.
|
||||
The software has similar functionality to the original firmware.
|
||||
|
||||
# Features Working
|
||||
* Soldering / Temperature control
|
||||
* Full PID Iron Temp
|
||||
* Adjusting temperature
|
||||
* Automatic sleep
|
||||
* Motion wake support
|
||||
* Basic settings menu
|
||||
|
||||
# Features still to be implimented
|
||||
* Input voltage UVLO measurement
|
||||
* Saving settings to flash for persistance
|
||||
* Improved GUI
|
||||
* Manual Temp Calibration
|
||||
* Use hardware I2C
|
||||
|
||||
@@ -6,7 +6,7 @@ This is used for motion detection of the soldering iron.
|
||||
|
||||
# USB Disk
|
||||
When the unit is plugged into the computer, it presents a FAT device to the operating system over the usb connection.
|
||||
This is implimented using a ram buffer for the disk.
|
||||
This is implemented using a ram buffer for the disk.
|
||||
|
||||
|
||||
|
||||
@@ -14,10 +14,8 @@ This is implimented using a ram buffer for the disk.
|
||||
# Future improvements to be made
|
||||
These features are things I would like to add to the firmware
|
||||
|
||||
* Use hardware PWM for driving the heating element.
|
||||
* Use the sysTick hardware for timing of events
|
||||
* Move all the settings to an on device menu system instead of usb link
|
||||
* Move error codes into a unified struct
|
||||
* Rewrite most of the OLED stack to not require hardcoded values
|
||||
* Rework the modes of the unit to be neater
|
||||
|
||||
|
||||
@@ -42,8 +42,8 @@ Mcu.Pin9=PA14
|
||||
Mcu.PinsNb=16
|
||||
Mcu.UserConstants=
|
||||
Mcu.UserName=STM32F103T8Ux
|
||||
MxCube.Version=4.16.0
|
||||
MxDb.Version=DB.4.0.160
|
||||
MxCube.Version=4.16.1
|
||||
MxDb.Version=DB.4.0.161
|
||||
NVIC.BusFault_IRQn=true\:0\:0\:false\:false\:true
|
||||
NVIC.DebugMonitor_IRQn=true\:0\:0\:false\:false\:true
|
||||
NVIC.HardFault_IRQn=true\:0\:0\:false\:false\:true
|
||||
@@ -107,7 +107,7 @@ PB7.Signal=I2C1_SDA
|
||||
PCC.Checker=false
|
||||
PCC.Line=STM32F103
|
||||
PCC.MCU=STM32F103T(8-B)Ux
|
||||
PCC.MXVersion=4.16.0
|
||||
PCC.MXVersion=4.16.1
|
||||
PCC.PartNumber=STM32F103T8Ux
|
||||
PCC.Seq0=0
|
||||
PCC.Series=STM32F1
|
||||
@@ -127,13 +127,13 @@ ProjectManager.HeapSize=0x200
|
||||
ProjectManager.KeepUserCode=true
|
||||
ProjectManager.LastFirmware=true
|
||||
ProjectManager.LibraryCopy=1
|
||||
ProjectManager.PreviousToolchain=
|
||||
ProjectManager.PreviousToolchain=SW4STM32
|
||||
ProjectManager.ProjectBuild=false
|
||||
ProjectManager.ProjectFileName=TS100.ioc
|
||||
ProjectManager.ProjectName=TS100
|
||||
ProjectManager.StackSize=0x400
|
||||
ProjectManager.TargetToolchain=SW4STM32
|
||||
ProjectManager.ToolChainLocation=/home/ralim/Repo/ts100/TS100
|
||||
ProjectManager.ToolChainLocation=C\:\\Users\\Ralim\\Repo\\ts100\\TS100
|
||||
ProjectManager.UnderRoot=true
|
||||
ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false,2-MX_I2C1_Init-I2C1-false,3-MX_ADC2_Init-ADC2-false,4-MX_USB_PCD_Init-USB-false,5-MX_ADC1_Init-ADC1-false
|
||||
RCC.ADCFreqValue=12000000
|
||||
@@ -147,12 +147,13 @@ RCC.APB2TimFreq_Value=48000000
|
||||
RCC.FCLKCortexFreq_Value=48000000
|
||||
RCC.FamilyName=M
|
||||
RCC.HCLKFreq_Value=48000000
|
||||
RCC.IPParameters=ADCFreqValue,ADCPresc,AHBFreq_Value,APB1CLKDivider,APB1Freq_Value,APB1TimFreq_Value,APB2Freq_Value,APB2TimFreq_Value,FCLKCortexFreq_Value,FamilyName,HCLKFreq_Value,MCOFreq_Value,PLLCLKFreq_Value,PLLMCOFreq_Value,PLLMUL,PLLSourceVirtualString,SYSCLKFreq_VALUE,SYSCLKSource,TimSysFreq_Value,USBFreq_Value
|
||||
RCC.IPParameters=ADCFreqValue,ADCPresc,AHBFreq_Value,APB1CLKDivider,APB1Freq_Value,APB1TimFreq_Value,APB2Freq_Value,APB2TimFreq_Value,FCLKCortexFreq_Value,FamilyName,HCLKFreq_Value,MCOFreq_Value,PLLCLKFreq_Value,PLLMCOFreq_Value,PLLMUL,PLLSource,PLLSourceVirtual,SYSCLKFreq_VALUE,SYSCLKSource,TimSysFreq_Value,USBFreq_Value
|
||||
RCC.MCOFreq_Value=48000000
|
||||
RCC.PLLCLKFreq_Value=48000000
|
||||
RCC.PLLMCOFreq_Value=24000000
|
||||
RCC.PLLMUL=RCC_PLL_MUL12
|
||||
RCC.PLLSourceVirtualString=RCC_PLLSOURCE_HSI_DIV2
|
||||
RCC.PLLSource=RCC_PLLSOURCE_HSI_DIV2
|
||||
RCC.PLLSourceVirtual=RCC_PLLSOURCE_HSI_DIV2
|
||||
RCC.SYSCLKFreq_VALUE=48000000
|
||||
RCC.SYSCLKSource=RCC_SYSCLKSOURCE_PLLCLK
|
||||
RCC.TimSysFreq_Value=48000000
|
||||
|
||||
@@ -20,16 +20,20 @@
|
||||
<option id="fr.ac6.managedbuild.option.gnu.cross.mcu.1416828544" name="Mcu" superClass="fr.ac6.managedbuild.option.gnu.cross.mcu" value="STM32F103T8Ux" valueType="string"/>
|
||||
<option id="fr.ac6.managedbuild.option.gnu.cross.board.1401196546" name="Board" superClass="fr.ac6.managedbuild.option.gnu.cross.board" value="ts100" valueType="string"/>
|
||||
<targetPlatform archList="all" binaryParser="org.eclipse.cdt.core.ELF" id="fr.ac6.managedbuild.targetPlatform.gnu.cross.1811524023" isAbstract="false" osList="all" superClass="fr.ac6.managedbuild.targetPlatform.gnu.cross"/>
|
||||
<builder buildPath="${workspace_loc:/ts100}/Debug" id="fr.ac6.managedbuild.builder.gnu.cross.727350462" keepEnvironmentInBuildfile="false" managedBuildOn="true" name="Gnu Make Builder" superClass="fr.ac6.managedbuild.builder.gnu.cross"/>
|
||||
<builder buildPath="${workspace_loc:/ts100}/Debug" id="fr.ac6.managedbuild.builder.gnu.cross.727350462" keepEnvironmentInBuildfile="false" managedBuildOn="true" name="Gnu Make Builder" superClass="fr.ac6.managedbuild.builder.gnu.cross">
|
||||
<outputEntries>
|
||||
<entry flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="outputPath" name="Debug"/>
|
||||
<entry flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="outputPath" name="Release"/>
|
||||
</outputEntries>
|
||||
</builder>
|
||||
<tool id="fr.ac6.managedbuild.tool.gnu.cross.c.compiler.1500724168" name="MCU GCC Compiler" superClass="fr.ac6.managedbuild.tool.gnu.cross.c.compiler">
|
||||
<option id="fr.ac6.managedbuild.gnu.c.compiler.option.optimization.level.963224364" name="Optimization Level" superClass="fr.ac6.managedbuild.gnu.c.compiler.option.optimization.level" useByScannerDiscovery="false" value="fr.ac6.managedbuild.gnu.c.optimization.level.size" valueType="enumerated"/>
|
||||
<option id="gnu.c.compiler.option.debugging.level.400507088" name="Debug Level" superClass="gnu.c.compiler.option.debugging.level" useByScannerDiscovery="false" value="gnu.c.debugging.level.none" valueType="enumerated"/>
|
||||
<option id="fr.ac6.managedbuild.gnu.c.compiler.option.optimization.level.963224364" name="Optimization Level" superClass="fr.ac6.managedbuild.gnu.c.compiler.option.optimization.level" useByScannerDiscovery="false" value="fr.ac6.managedbuild.gnu.c.optimization.level.more" valueType="enumerated"/>
|
||||
<option id="gnu.c.compiler.option.debugging.level.400507088" name="Debug Level" superClass="gnu.c.compiler.option.debugging.level" useByScannerDiscovery="false" value="gnu.c.debugging.level.max" valueType="enumerated"/>
|
||||
<option id="gnu.c.compiler.option.include.paths.1436405353" name="Include paths (-I)" superClass="gnu.c.compiler.option.include.paths" useByScannerDiscovery="false" valueType="includePath">
|
||||
<listOptionValue builtIn="false" value=""${ProjDirPath}/inc""/>
|
||||
<listOptionValue builtIn="false" value=""${ProjDirPath}/STM32_USB-FS-Device_Driver/inc""/>
|
||||
<listOptionValue builtIn="false" value=""${ProjDirPath}/StdPeriph_Driver/inc""/>
|
||||
<listOptionValue builtIn="false" value=""${ProjDirPath}/CMSIS/core""/>
|
||||
<listOptionValue builtIn="false" value=""${ProjDirPath}/CMSIS/device""/>
|
||||
<listOptionValue builtIn="false" value=""${workspace_loc:/${ProjName}/inc}""/>
|
||||
<listOptionValue builtIn="false" value=""${workspace_loc:/${ProjName}/StdPeriph_Driver/inc}""/>
|
||||
<listOptionValue builtIn="false" value=""${workspace_loc:/${ProjName}/CMSIS/core}""/>
|
||||
<listOptionValue builtIn="false" value=""${workspace_loc:/${ProjName}/CMSIS/device}""/>
|
||||
</option>
|
||||
<option id="gnu.c.compiler.option.preprocessor.def.symbols.1155214152" name="Defined symbols (-D)" superClass="gnu.c.compiler.option.preprocessor.def.symbols" useByScannerDiscovery="false" valueType="definedSymbols">
|
||||
<listOptionValue builtIn="false" value="STM32F103T8Ux"/>
|
||||
@@ -45,7 +49,7 @@
|
||||
</option>
|
||||
<option id="gnu.c.compiler.option.dialect.std.1983627145" name="Language standard" superClass="gnu.c.compiler.option.dialect.std" useByScannerDiscovery="true" value="gnu.c.compiler.dialect.c11" valueType="enumerated"/>
|
||||
<option id="gnu.c.compiler.option.warnings.nowarn.1227270879" name="Inhibit all warnings (-w)" superClass="gnu.c.compiler.option.warnings.nowarn" useByScannerDiscovery="false" value="false" valueType="boolean"/>
|
||||
<option id="fr.ac6.managedbuild.tool.gnu.cross.c.compiler.fdata.1556802580" superClass="fr.ac6.managedbuild.tool.gnu.cross.c.compiler.fdata" value="true" valueType="boolean"/>
|
||||
<option id="fr.ac6.managedbuild.tool.gnu.cross.c.compiler.fdata.1556802580" name="Place the data in their own section (-fdata-sections)" superClass="fr.ac6.managedbuild.tool.gnu.cross.c.compiler.fdata" useByScannerDiscovery="false" value="true" valueType="boolean"/>
|
||||
<inputType id="fr.ac6.managedbuild.tool.gnu.cross.c.compiler.input.c.1635097739" superClass="fr.ac6.managedbuild.tool.gnu.cross.c.compiler.input.c"/>
|
||||
<inputType id="fr.ac6.managedbuild.tool.gnu.cross.c.compiler.input.s.211510996" superClass="fr.ac6.managedbuild.tool.gnu.cross.c.compiler.input.s"/>
|
||||
</tool>
|
||||
@@ -65,10 +69,10 @@
|
||||
<tool id="fr.ac6.managedbuild.tool.gnu.archiver.1926145385" name="MCU GCC Archiver" superClass="fr.ac6.managedbuild.tool.gnu.archiver"/>
|
||||
<tool id="fr.ac6.managedbuild.tool.gnu.cross.assembler.104990963" name="MCU GCC Assembler" superClass="fr.ac6.managedbuild.tool.gnu.cross.assembler">
|
||||
<option id="gnu.both.asm.option.include.paths.834243276" name="Include paths (-I)" superClass="gnu.both.asm.option.include.paths" valueType="includePath">
|
||||
<listOptionValue builtIn="false" value=""${ProjDirPath}/inc""/>
|
||||
<listOptionValue builtIn="false" value=""${ProjDirPath}/StdPeriph_Driver/inc""/>
|
||||
<listOptionValue builtIn="false" value=""${ProjDirPath}/CMSIS/core""/>
|
||||
<listOptionValue builtIn="false" value=""${ProjDirPath}/CMSIS/device""/>
|
||||
<listOptionValue builtIn="false" value="/home/ralim/Repo/ts100/workspace/ts100/inc"/>
|
||||
<listOptionValue builtIn="false" value="/home/ralim/Repo/ts100/workspace/ts100/StdPeriph_Driver/inc"/>
|
||||
<listOptionValue builtIn="false" value="/home/ralim/Repo/ts100/workspace/ts100/CMSIS/core"/>
|
||||
<listOptionValue builtIn="false" value="/home/ralim/Repo/ts100/workspace/ts100/CMSIS/device"/>
|
||||
</option>
|
||||
<inputType id="cdt.managedbuild.tool.gnu.assembler.input.1754789872" superClass="cdt.managedbuild.tool.gnu.assembler.input"/>
|
||||
<inputType id="fr.ac6.managedbuild.tool.gnu.cross.assembler.input.610009869" superClass="fr.ac6.managedbuild.tool.gnu.cross.assembler.input"/>
|
||||
@@ -77,7 +81,6 @@
|
||||
</folderInfo>
|
||||
<sourceEntries>
|
||||
<entry flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="sourcePath" name="CMSIS"/>
|
||||
<entry flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="sourcePath" name="STM32_USB-FS-Device_Driver"/>
|
||||
<entry flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="sourcePath" name="StdPeriph_Driver"/>
|
||||
<entry flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="sourcePath" name="inc"/>
|
||||
<entry flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="sourcePath" name="src"/>
|
||||
|
||||
1
workspace/ts100/.gitignore
vendored
Normal file
1
workspace/ts100/.gitignore
vendored
Normal file
@@ -0,0 +1 @@
|
||||
/Debug/
|
||||
@@ -1,27 +0,0 @@
|
||||
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
|
||||
<project>
|
||||
<configuration id="fr.ac6.managedbuild.config.gnu.cross.exe.debug.1236130657" name="Debug">
|
||||
<extension point="org.eclipse.cdt.core.LanguageSettingsProvider">
|
||||
<provider copy-of="extension" id="org.eclipse.cdt.ui.UserLanguageSettingsProvider"/>
|
||||
<provider-reference id="org.eclipse.cdt.core.ReferencedProjectsLanguageSettingsProvider" ref="shared-provider"/>
|
||||
<provider-reference id="org.eclipse.cdt.managedbuilder.core.MBSLanguageSettingsProvider" ref="shared-provider"/>
|
||||
<provider copy-of="extension" id="org.eclipse.cdt.managedbuilder.core.GCCBuildCommandParser"/>
|
||||
<provider class="fr.ac6.mcu.ide.build.CrossBuiltinSpecsDetector" console="false" env-hash="-1108237618066810324" id="fr.ac6.mcu.ide.build.CrossBuiltinSpecsDetector" keep-relative-paths="false" name="Ac6 SW4 STM32 MCU Built-in Compiler Settings" parameter="${COMMAND} ${FLAGS} -E -P -v -dD "${INPUTS}"" prefer-non-shared="true">
|
||||
<language-scope id="org.eclipse.cdt.core.gcc"/>
|
||||
<language-scope id="org.eclipse.cdt.core.g++"/>
|
||||
</provider>
|
||||
</extension>
|
||||
</configuration>
|
||||
<configuration id="fr.ac6.managedbuild.config.gnu.cross.exe.release.1113492345" name="Release">
|
||||
<extension point="org.eclipse.cdt.core.LanguageSettingsProvider">
|
||||
<provider copy-of="extension" id="org.eclipse.cdt.ui.UserLanguageSettingsProvider"/>
|
||||
<provider-reference id="org.eclipse.cdt.core.ReferencedProjectsLanguageSettingsProvider" ref="shared-provider"/>
|
||||
<provider-reference id="org.eclipse.cdt.managedbuilder.core.MBSLanguageSettingsProvider" ref="shared-provider"/>
|
||||
<provider copy-of="extension" id="org.eclipse.cdt.managedbuilder.core.GCCBuildCommandParser"/>
|
||||
<provider class="fr.ac6.mcu.ide.build.CrossBuiltinSpecsDetector" console="false" env-hash="-1102374516241012504" id="fr.ac6.mcu.ide.build.CrossBuiltinSpecsDetector" keep-relative-paths="false" name="Ac6 SW4 STM32 MCU Built-in Compiler Settings" parameter="${COMMAND} ${FLAGS} -E -P -v -dD "${INPUTS}"" prefer-non-shared="true">
|
||||
<language-scope id="org.eclipse.cdt.core.gcc"/>
|
||||
<language-scope id="org.eclipse.cdt.core.g++"/>
|
||||
</provider>
|
||||
</extension>
|
||||
</configuration>
|
||||
</project>
|
||||
@@ -62,8 +62,10 @@ _Min_Stack_Size = 0x400; /* required amount of stack */
|
||||
MEMORY
|
||||
{
|
||||
RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 20K
|
||||
ROM (rx) : ORIGIN = 0x08004000, LENGTH = 36K
|
||||
ROM (rx) : ORIGIN = 0x08000000, LENGTH = 64K
|
||||
|
||||
}
|
||||
/*ROM (rx) : ORIGIN = 0x08004000, LENGTH = 48K*/
|
||||
/*^ The rom is shortened as the last ~10K is used for storing the virtual USB Disk, and the offset at the beginning in the bootloader*/
|
||||
/* Sections */
|
||||
SECTIONS
|
||||
|
||||
@@ -1,259 +0,0 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file usb_core.h
|
||||
* @author MCD Application Team
|
||||
* @version V4.0.0
|
||||
* @date 28-August-2012
|
||||
* @brief Standard protocol processing functions prototypes
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© COPYRIGHT 2012 STMicroelectronics</center></h2>
|
||||
*
|
||||
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
|
||||
* You may not use this file except in compliance with the License.
|
||||
* You may obtain a copy of the License at:
|
||||
*
|
||||
* http://www.st.com/software_license_agreement_liberty_v2
|
||||
*
|
||||
* Unless required by applicable law or agreed to in writing, software
|
||||
* distributed under the License is distributed on an "AS IS" BASIS,
|
||||
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
* See the License for the specific language governing permissions and
|
||||
* limitations under the License.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __USB_CORE_H
|
||||
#define __USB_CORE_H
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
typedef enum _CONTROL_STATE
|
||||
{
|
||||
WAIT_SETUP, /* 0 */
|
||||
SETTING_UP, /* 1 */
|
||||
IN_DATA, /* 2 */
|
||||
OUT_DATA, /* 3 */
|
||||
LAST_IN_DATA, /* 4 */
|
||||
LAST_OUT_DATA, /* 5 */
|
||||
WAIT_STATUS_IN, /* 7 */
|
||||
WAIT_STATUS_OUT, /* 8 */
|
||||
STALLED, /* 9 */
|
||||
PAUSE /* 10 */
|
||||
} CONTROL_STATE; /* The state machine states of a control pipe */
|
||||
|
||||
typedef struct OneDescriptor
|
||||
{
|
||||
uint8_t *Descriptor;
|
||||
uint16_t Descriptor_Size;
|
||||
}
|
||||
ONE_DESCRIPTOR, *PONE_DESCRIPTOR;
|
||||
/* All the request process routines return a value of this type
|
||||
If the return value is not SUCCESS or NOT_READY,
|
||||
the software will STALL the correspond endpoint */
|
||||
typedef enum _RESULT
|
||||
{
|
||||
USB_SUCCESS = 0, /* Process successfully */
|
||||
USB_ERROR,
|
||||
USB_UNSUPPORT,
|
||||
USB_NOT_READY /* The process has not been finished, endpoint will be
|
||||
NAK to further request */
|
||||
} RESULT;
|
||||
|
||||
|
||||
/*-*-*-*-*-*-*-*-*-*-* Definitions for endpoint level -*-*-*-*-*-*-*-*-*-*-*-*/
|
||||
typedef struct _ENDPOINT_INFO
|
||||
{
|
||||
/* When send data out of the device,
|
||||
CopyData() is used to get data buffer 'Length' bytes data
|
||||
if Length is 0,
|
||||
CopyData() returns the total length of the data
|
||||
if the request is not supported, returns 0
|
||||
(NEW Feature )
|
||||
if CopyData() returns -1, the calling routine should not proceed
|
||||
further and will resume the SETUP process by the class device
|
||||
if Length is not 0,
|
||||
CopyData() returns a pointer to indicate the data location
|
||||
Usb_wLength is the data remain to be sent,
|
||||
Usb_wOffset is the Offset of original data
|
||||
When receive data from the host,
|
||||
CopyData() is used to get user data buffer which is capable
|
||||
of Length bytes data to copy data from the endpoint buffer.
|
||||
if Length is 0,
|
||||
CopyData() returns the available data length,
|
||||
if Length is not 0,
|
||||
CopyData() returns user buffer address
|
||||
Usb_rLength is the data remain to be received,
|
||||
Usb_rPointer is the Offset of data buffer
|
||||
*/
|
||||
uint16_t Usb_wLength;
|
||||
uint16_t Usb_wOffset;
|
||||
uint16_t PacketSize;
|
||||
uint8_t *(*CopyData)(uint16_t Length);
|
||||
}ENDPOINT_INFO;
|
||||
|
||||
/*-*-*-*-*-*-*-*-*-*-*-* Definitions for device level -*-*-*-*-*-*-*-*-*-*-*-*/
|
||||
|
||||
typedef struct _DEVICE
|
||||
{
|
||||
uint8_t Total_Endpoint; /* Number of endpoints that are used */
|
||||
uint8_t Total_Configuration;/* Number of configuration available */
|
||||
}
|
||||
DEVICE;
|
||||
|
||||
typedef union
|
||||
{
|
||||
uint16_t w;
|
||||
struct BW
|
||||
{
|
||||
uint8_t bb1;
|
||||
uint8_t bb0;
|
||||
}
|
||||
bw;
|
||||
} uint16_t_uint8_t;
|
||||
|
||||
typedef struct _DEVICE_INFO
|
||||
{
|
||||
uint8_t USBbmRequestType; /* bmRequestType */
|
||||
uint8_t USBbRequest; /* bRequest */
|
||||
uint16_t_uint8_t USBwValues; /* wValue */
|
||||
uint16_t_uint8_t USBwIndexs; /* wIndex */
|
||||
uint16_t_uint8_t USBwLengths; /* wLength */
|
||||
|
||||
uint8_t ControlState; /* of type CONTROL_STATE */
|
||||
uint8_t Current_Feature;
|
||||
uint8_t Current_Configuration; /* Selected configuration */
|
||||
uint8_t Current_Interface; /* Selected interface of current configuration */
|
||||
uint8_t Current_AlternateSetting;/* Selected Alternate Setting of current
|
||||
interface*/
|
||||
|
||||
ENDPOINT_INFO Ctrl_Info;
|
||||
}DEVICE_INFO;
|
||||
|
||||
typedef struct _DEVICE_PROP
|
||||
{
|
||||
void (*Init)(void); /* Initialize the device */
|
||||
void (*Reset)(void); /* Reset routine of this device */
|
||||
|
||||
/* Device dependent process after the status stage */
|
||||
void (*Process_Status_IN)(void);
|
||||
void (*Process_Status_OUT)(void);
|
||||
|
||||
/* Procedure of process on setup stage of a class specified request with data stage */
|
||||
/* All class specified requests with data stage are processed in Class_Data_Setup
|
||||
Class_Data_Setup()
|
||||
responses to check all special requests and fills ENDPOINT_INFO
|
||||
according to the request
|
||||
If IN tokens are expected, then wLength & wOffset will be filled
|
||||
with the total transferring bytes and the starting position
|
||||
If OUT tokens are expected, then rLength & rOffset will be filled
|
||||
with the total expected bytes and the starting position in the buffer
|
||||
|
||||
If the request is valid, Class_Data_Setup returns SUCCESS, else UNSUPPORT
|
||||
|
||||
CAUTION:
|
||||
Since GET_CONFIGURATION & GET_INTERFACE are highly related to
|
||||
the individual classes, they will be checked and processed here.
|
||||
*/
|
||||
RESULT (*Class_Data_Setup)(uint8_t RequestNo);
|
||||
|
||||
/* Procedure of process on setup stage of a class specified request without data stage */
|
||||
/* All class specified requests without data stage are processed in Class_NoData_Setup
|
||||
Class_NoData_Setup
|
||||
responses to check all special requests and perform the request
|
||||
|
||||
CAUTION:
|
||||
Since SET_CONFIGURATION & SET_INTERFACE are highly related to
|
||||
the individual classes, they will be checked and processed here.
|
||||
*/
|
||||
RESULT (*Class_NoData_Setup)(uint8_t RequestNo);
|
||||
|
||||
/*Class_Get_Interface_Setting
|
||||
This function is used by the file usb_core.c to test if the selected Interface
|
||||
and Alternate Setting (uint8_t Interface, uint8_t AlternateSetting) are supported by
|
||||
the application.
|
||||
This function is writing by user. It should return "SUCCESS" if the Interface
|
||||
and Alternate Setting are supported by the application or "UNSUPPORT" if they
|
||||
are not supported. */
|
||||
|
||||
RESULT (*Class_Get_Interface_Setting)(uint8_t Interface, uint8_t AlternateSetting);
|
||||
|
||||
uint8_t* (*GetDeviceDescriptor)(uint16_t Length);
|
||||
uint8_t* (*GetConfigDescriptor)(uint16_t Length);
|
||||
uint8_t* (*GetStringDescriptor)(uint16_t Length);
|
||||
|
||||
/* This field is not used in current library version. It is kept only for
|
||||
compatibility with previous versions */
|
||||
void* RxEP_buffer;
|
||||
|
||||
uint8_t MaxPacketSize;
|
||||
|
||||
}DEVICE_PROP;
|
||||
|
||||
typedef struct _USER_STANDARD_REQUESTS
|
||||
{
|
||||
void (*User_GetConfiguration)(void); /* Get Configuration */
|
||||
void (*User_SetConfiguration)(void); /* Set Configuration */
|
||||
void (*User_GetInterface)(void); /* Get Interface */
|
||||
void (*User_SetInterface)(void); /* Set Interface */
|
||||
void (*User_GetStatus)(void); /* Get Status */
|
||||
void (*User_ClearFeature)(void); /* Clear Feature */
|
||||
void (*User_SetEndPointFeature)(void); /* Set Endpoint Feature */
|
||||
void (*User_SetDeviceFeature)(void); /* Set Device Feature */
|
||||
void (*User_SetDeviceAddress)(void); /* Set Device Address */
|
||||
}
|
||||
USER_STANDARD_REQUESTS;
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
#define Type_Recipient (pInformation->USBbmRequestType & (REQUEST_TYPE | RECIPIENT))
|
||||
|
||||
#define Usb_rLength Usb_wLength
|
||||
#define Usb_rOffset Usb_wOffset
|
||||
|
||||
#define USBwValue USBwValues.w
|
||||
#define USBwValue0 USBwValues.bw.bb0
|
||||
#define USBwValue1 USBwValues.bw.bb1
|
||||
#define USBwIndex USBwIndexs.w
|
||||
#define USBwIndex0 USBwIndexs.bw.bb0
|
||||
#define USBwIndex1 USBwIndexs.bw.bb1
|
||||
#define USBwLength USBwLengths.w
|
||||
#define USBwLength0 USBwLengths.bw.bb0
|
||||
#define USBwLength1 USBwLengths.bw.bb1
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/* Exported functions ------------------------------------------------------- */
|
||||
uint8_t Setup0_Process(void);
|
||||
uint8_t Post0_Process(void);
|
||||
uint8_t Out0_Process(void);
|
||||
uint8_t In0_Process(void);
|
||||
|
||||
RESULT Standard_SetEndPointFeature(void);
|
||||
RESULT Standard_SetDeviceFeature(void);
|
||||
|
||||
uint8_t *Standard_GetConfiguration(uint16_t Length);
|
||||
RESULT Standard_SetConfiguration(void);
|
||||
uint8_t *Standard_GetInterface(uint16_t Length);
|
||||
RESULT Standard_SetInterface(void);
|
||||
uint8_t *Standard_GetDescriptorData(uint16_t Length, PONE_DESCRIPTOR pDesc);
|
||||
|
||||
uint8_t *Standard_GetStatus(uint16_t Length);
|
||||
RESULT Standard_ClearFeature(void);
|
||||
void SetDeviceAddress(uint8_t);
|
||||
void NOP_Process(void);
|
||||
|
||||
extern DEVICE_PROP Device_Property;
|
||||
extern USER_STANDARD_REQUESTS User_Standard_Requests;
|
||||
extern DEVICE Device_Table;
|
||||
extern DEVICE_INFO Device_Info;
|
||||
|
||||
/* cells saving status during interrupt servicing */
|
||||
extern volatile uint16_t SaveRState;
|
||||
extern volatile uint16_t SaveTState;
|
||||
|
||||
#endif /* __USB_CORE_H */
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
@@ -1,92 +0,0 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file usb_def.h
|
||||
* @author MCD Application Team
|
||||
* @version V4.0.0
|
||||
* @date 28-August-2012
|
||||
* @brief Definitions related to USB Core
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© COPYRIGHT 2012 STMicroelectronics</center></h2>
|
||||
*
|
||||
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
|
||||
* You may not use this file except in compliance with the License.
|
||||
* You may obtain a copy of the License at:
|
||||
*
|
||||
* http://www.st.com/software_license_agreement_liberty_v2
|
||||
*
|
||||
* Unless required by applicable law or agreed to in writing, software
|
||||
* distributed under the License is distributed on an "AS IS" BASIS,
|
||||
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
* See the License for the specific language governing permissions and
|
||||
* limitations under the License.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __USB_DEF_H
|
||||
#define __USB_DEF_H
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
typedef enum _RECIPIENT_TYPE
|
||||
{
|
||||
DEVICE_RECIPIENT, /* Recipient device */
|
||||
INTERFACE_RECIPIENT, /* Recipient interface */
|
||||
ENDPOINT_RECIPIENT, /* Recipient endpoint */
|
||||
OTHER_RECIPIENT
|
||||
} RECIPIENT_TYPE;
|
||||
|
||||
|
||||
typedef enum _STANDARD_REQUESTS
|
||||
{
|
||||
GET_STATUS = 0,
|
||||
CLEAR_FEATURE,
|
||||
RESERVED1,
|
||||
SET_FEATURE,
|
||||
RESERVED2,
|
||||
SET_ADDRESS,
|
||||
GET_DESCRIPTOR,
|
||||
SET_DESCRIPTOR,
|
||||
GET_CONFIGURATION,
|
||||
SET_CONFIGURATION,
|
||||
GET_INTERFACE,
|
||||
SET_INTERFACE,
|
||||
TOTAL_sREQUEST, /* Total number of Standard request */
|
||||
SYNCH_FRAME = 12
|
||||
} STANDARD_REQUESTS;
|
||||
|
||||
/* Definition of "USBwValue" */
|
||||
typedef enum _DESCRIPTOR_TYPE
|
||||
{
|
||||
DEVICE_DESCRIPTOR = 1,
|
||||
CONFIG_DESCRIPTOR,
|
||||
STRING_DESCRIPTOR,
|
||||
INTERFACE_DESCRIPTOR,
|
||||
ENDPOINT_DESCRIPTOR
|
||||
} DESCRIPTOR_TYPE;
|
||||
|
||||
/* Feature selector of a SET_FEATURE or CLEAR_FEATURE */
|
||||
typedef enum _FEATURE_SELECTOR
|
||||
{
|
||||
ENDPOINT_STALL,
|
||||
DEVICE_REMOTE_WAKEUP
|
||||
} FEATURE_SELECTOR;
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/* Definition of "USBbmRequestType" */
|
||||
#define REQUEST_TYPE 0x60 /* Mask to get request type */
|
||||
#define STANDARD_REQUEST 0x00 /* Standard request */
|
||||
#define CLASS_REQUEST 0x20 /* Class request */
|
||||
#define VENDOR_REQUEST 0x40 /* Vendor request */
|
||||
|
||||
#define RECIPIENT 0x1F /* Mask to get recipient */
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/* Exported functions ------------------------------------------------------- */
|
||||
|
||||
#endif /* __USB_DEF_H */
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
@@ -1,62 +0,0 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file usb_init.h
|
||||
* @author MCD Application Team
|
||||
* @version V4.0.0
|
||||
* @date 28-August-2012
|
||||
* @brief Initialization routines & global variables
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© COPYRIGHT 2012 STMicroelectronics</center></h2>
|
||||
*
|
||||
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
|
||||
* You may not use this file except in compliance with the License.
|
||||
* You may obtain a copy of the License at:
|
||||
*
|
||||
* http://www.st.com/software_license_agreement_liberty_v2
|
||||
*
|
||||
* Unless required by applicable law or agreed to in writing, software
|
||||
* distributed under the License is distributed on an "AS IS" BASIS,
|
||||
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
* See the License for the specific language governing permissions and
|
||||
* limitations under the License.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __USB_INIT_H
|
||||
#define __USB_INIT_H
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/* Exported functions ------------------------------------------------------- */
|
||||
void USB_Init(void);
|
||||
|
||||
/* External variables --------------------------------------------------------*/
|
||||
/* The number of current endpoint, it will be used to specify an endpoint */
|
||||
extern uint8_t EPindex;
|
||||
/* The number of current device, it is an index to the Device_Table */
|
||||
/*extern uint8_t Device_no; */
|
||||
/* Points to the DEVICE_INFO structure of current device */
|
||||
/* The purpose of this register is to speed up the execution */
|
||||
extern DEVICE_INFO* pInformation;
|
||||
/* Points to the DEVICE_PROP structure of current device */
|
||||
/* The purpose of this register is to speed up the execution */
|
||||
extern DEVICE_PROP* pProperty;
|
||||
/* Temporary save the state of Rx & Tx status. */
|
||||
/* Whenever the Rx or Tx state is changed, its value is saved */
|
||||
/* in this variable first and will be set to the EPRB or EPRA */
|
||||
/* at the end of interrupt process */
|
||||
extern USER_STANDARD_REQUESTS *pUser_Standard_Requests;
|
||||
|
||||
extern uint16_t SaveState ;
|
||||
extern uint16_t wInterrupt_Mask;
|
||||
|
||||
#endif /* __USB_INIT_H */
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
@@ -1,45 +0,0 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file usb_int.h
|
||||
* @author MCD Application Team
|
||||
* @version V4.0.0
|
||||
* @date 28-August-2012
|
||||
* @brief Endpoint CTR (Low and High) interrupt's service routines prototypes
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© COPYRIGHT 2012 STMicroelectronics</center></h2>
|
||||
*
|
||||
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
|
||||
* You may not use this file except in compliance with the License.
|
||||
* You may obtain a copy of the License at:
|
||||
*
|
||||
* http://www.st.com/software_license_agreement_liberty_v2
|
||||
*
|
||||
* Unless required by applicable law or agreed to in writing, software
|
||||
* distributed under the License is distributed on an "AS IS" BASIS,
|
||||
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
* See the License for the specific language governing permissions and
|
||||
* limitations under the License.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __USB_INT_H
|
||||
#define __USB_INT_H
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/* Exported functions ------------------------------------------------------- */
|
||||
void CTR_LP(void);
|
||||
void CTR_HP(void);
|
||||
|
||||
/* External variables --------------------------------------------------------*/
|
||||
|
||||
#endif /* __USB_INT_H */
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
@@ -1,51 +0,0 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file usb_lib.h
|
||||
* @author MCD Application Team
|
||||
* @version V4.0.0
|
||||
* @date 28-August-2012
|
||||
* @brief USB library include files
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© COPYRIGHT 2012 STMicroelectronics</center></h2>
|
||||
*
|
||||
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
|
||||
* You may not use this file except in compliance with the License.
|
||||
* You may obtain a copy of the License at:
|
||||
*
|
||||
* http://www.st.com/software_license_agreement_liberty_v2
|
||||
*
|
||||
* Unless required by applicable law or agreed to in writing, software
|
||||
* distributed under the License is distributed on an "AS IS" BASIS,
|
||||
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
* See the License for the specific language governing permissions and
|
||||
* limitations under the License.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __USB_LIB_H
|
||||
#define __USB_LIB_H
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "usb_type.h"
|
||||
#include "usb_regs.h"
|
||||
#include "usb_def.h"
|
||||
#include "usb_core.h"
|
||||
#include "usb_init.h"
|
||||
#include "usb_sil.h"
|
||||
#include "usb_mem.h"
|
||||
#include "usb_int.h"
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/* Exported functions ------------------------------------------------------- */
|
||||
/* External variables --------------------------------------------------------*/
|
||||
|
||||
#endif /* __USB_LIB_H */
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
@@ -1,45 +0,0 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file usb_mem.h
|
||||
* @author MCD Application Team
|
||||
* @version V4.0.0
|
||||
* @date 28-August-2012
|
||||
* @brief Utility prototypes functions for memory/PMA transfers
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© COPYRIGHT 2012 STMicroelectronics</center></h2>
|
||||
*
|
||||
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
|
||||
* You may not use this file except in compliance with the License.
|
||||
* You may obtain a copy of the License at:
|
||||
*
|
||||
* http://www.st.com/software_license_agreement_liberty_v2
|
||||
*
|
||||
* Unless required by applicable law or agreed to in writing, software
|
||||
* distributed under the License is distributed on an "AS IS" BASIS,
|
||||
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
* See the License for the specific language governing permissions and
|
||||
* limitations under the License.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __USB_MEM_H
|
||||
#define __USB_MEM_H
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/* Exported functions ------------------------------------------------------- */
|
||||
void UserToPMABufferCopy(uint8_t *pbUsrBuf, uint16_t wPMABufAddr, uint16_t wNBytes);
|
||||
void PMAToUserBufferCopy(uint8_t *pbUsrBuf, uint16_t wPMABufAddr, uint16_t wNBytes);
|
||||
|
||||
/* External variables --------------------------------------------------------*/
|
||||
|
||||
#endif /*__USB_MEM_H*/
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
@@ -1,32 +0,0 @@
|
||||
/******************** (C) COPYRIGHT 2007 STMicroelectronics ********************
|
||||
* File Name : usb_mem.h
|
||||
* Author : MCD Application Team
|
||||
* Version : V1.0
|
||||
* Date : 10/08/2007
|
||||
* Description : Utility prototypes functions for memory/PMA transfers
|
||||
********************************************************************************
|
||||
* THE PRESENT SOFTWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
|
||||
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
|
||||
* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
|
||||
* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
|
||||
* CONTENT OF SUCH SOFTWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
|
||||
* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
|
||||
*******************************************************************************/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __USB_MEM_H
|
||||
#define __USB_MEM_H
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/* Exported functions ------------------------------------------------------- */
|
||||
void UserToPMABufferCopy(uint8_t *pbUsrBuf, uint16_t wPMABufAddr, uint16_t wNBytes);
|
||||
void PMAToUserBufferCopy(uint8_t *pbUsrBuf, uint16_t wPMABufAddr, uint16_t wNBytes);
|
||||
|
||||
/* External variables --------------------------------------------------------*/
|
||||
|
||||
#endif /*__USB_MEM_H*/
|
||||
|
||||
/******************* (C) COPYRIGHT 2007 STMicroelectronics *****END OF FILE****/
|
||||
@@ -1,685 +0,0 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file usb_regs.h
|
||||
* @author MCD Application Team
|
||||
* @version V4.0.0
|
||||
* @date 28-August-2012
|
||||
* @brief Interface prototype functions to USB cell registers
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© COPYRIGHT 2012 STMicroelectronics</center></h2>
|
||||
*
|
||||
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
|
||||
* You may not use this file except in compliance with the License.
|
||||
* You may obtain a copy of the License at:
|
||||
*
|
||||
* http://www.st.com/software_license_agreement_liberty_v2
|
||||
*
|
||||
* Unless required by applicable law or agreed to in writing, software
|
||||
* distributed under the License is distributed on an "AS IS" BASIS,
|
||||
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
* See the License for the specific language governing permissions and
|
||||
* limitations under the License.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __USB_REGS_H
|
||||
#define __USB_REGS_H
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#ifdef STM32F30X
|
||||
#include "stm32f30x.h"
|
||||
#else
|
||||
#include "stm32f10x.h"
|
||||
#endif
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
typedef enum _EP_DBUF_DIR
|
||||
{
|
||||
/* double buffered endpoint direction */
|
||||
EP_DBUF_ERR,
|
||||
EP_DBUF_OUT,
|
||||
EP_DBUF_IN
|
||||
}EP_DBUF_DIR;
|
||||
|
||||
/* endpoint buffer number */
|
||||
enum EP_BUF_NUM
|
||||
{
|
||||
EP_NOBUF,
|
||||
EP_BUF0,
|
||||
EP_BUF1
|
||||
};
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
#define RegBase (0x40005C00L) /* USB_IP Peripheral Registers base address */
|
||||
#define PMAAddr (0x40006000L) /* USB_IP Packet Memory Area base address */
|
||||
|
||||
/******************************************************************************/
|
||||
/* General registers */
|
||||
/******************************************************************************/
|
||||
|
||||
/* Control register */
|
||||
#define CNTR ((__IO unsigned *)(RegBase + 0x40))
|
||||
/* Interrupt status register */
|
||||
#define ISTR ((__IO unsigned *)(RegBase + 0x44))
|
||||
/* Frame number register */
|
||||
#define FNR ((__IO unsigned *)(RegBase + 0x48))
|
||||
/* Device address register */
|
||||
#define DADDR ((__IO unsigned *)(RegBase + 0x4C))
|
||||
/* Buffer Table address register */
|
||||
#define BTABLE ((__IO unsigned *)(RegBase + 0x50))
|
||||
/******************************************************************************/
|
||||
/* Endpoint registers */
|
||||
/******************************************************************************/
|
||||
#define EP0REG ((__IO unsigned *)(RegBase)) /* endpoint 0 register address */
|
||||
|
||||
/* Endpoint Addresses (w/direction) */
|
||||
#define EP0_OUT ((uint8_t)0x00)
|
||||
#define EP0_IN ((uint8_t)0x80)
|
||||
#define EP1_OUT ((uint8_t)0x01)
|
||||
#define EP1_IN ((uint8_t)0x81)
|
||||
#define EP2_OUT ((uint8_t)0x02)
|
||||
#define EP2_IN ((uint8_t)0x82)
|
||||
#define EP3_OUT ((uint8_t)0x03)
|
||||
#define EP3_IN ((uint8_t)0x83)
|
||||
#define EP4_OUT ((uint8_t)0x04)
|
||||
#define EP4_IN ((uint8_t)0x84)
|
||||
#define EP5_OUT ((uint8_t)0x05)
|
||||
#define EP5_IN ((uint8_t)0x85)
|
||||
#define EP6_OUT ((uint8_t)0x06)
|
||||
#define EP6_IN ((uint8_t)0x86)
|
||||
#define EP7_OUT ((uint8_t)0x07)
|
||||
#define EP7_IN ((uint8_t)0x87)
|
||||
|
||||
/* endpoints enumeration */
|
||||
#define ENDP0 ((uint8_t)0)
|
||||
#define ENDP1 ((uint8_t)1)
|
||||
#define ENDP2 ((uint8_t)2)
|
||||
#define ENDP3 ((uint8_t)3)
|
||||
#define ENDP4 ((uint8_t)4)
|
||||
#define ENDP5 ((uint8_t)5)
|
||||
#define ENDP6 ((uint8_t)6)
|
||||
#define ENDP7 ((uint8_t)7)
|
||||
|
||||
/******************************************************************************/
|
||||
/* ISTR interrupt events */
|
||||
/******************************************************************************/
|
||||
#define ISTR_CTR (0x8000) /* Correct TRansfer (clear-only bit) */
|
||||
#define ISTR_DOVR (0x4000) /* DMA OVeR/underrun (clear-only bit) */
|
||||
#define ISTR_ERR (0x2000) /* ERRor (clear-only bit) */
|
||||
#define ISTR_WKUP (0x1000) /* WaKe UP (clear-only bit) */
|
||||
#define ISTR_SUSP (0x0800) /* SUSPend (clear-only bit) */
|
||||
#define ISTR_RESET (0x0400) /* RESET (clear-only bit) */
|
||||
#define ISTR_SOF (0x0200) /* Start Of Frame (clear-only bit) */
|
||||
#define ISTR_ESOF (0x0100) /* Expected Start Of Frame (clear-only bit) */
|
||||
|
||||
|
||||
#define ISTR_DIR (0x0010) /* DIRection of transaction (read-only bit) */
|
||||
#define ISTR_EP_ID (0x000F) /* EndPoint IDentifier (read-only bit) */
|
||||
|
||||
#define CLR_CTR (~ISTR_CTR) /* clear Correct TRansfer bit */
|
||||
#define CLR_DOVR (~ISTR_DOVR) /* clear DMA OVeR/underrun bit*/
|
||||
#define CLR_ERR (~ISTR_ERR) /* clear ERRor bit */
|
||||
#define CLR_WKUP (~ISTR_WKUP) /* clear WaKe UP bit */
|
||||
#define CLR_SUSP (~ISTR_SUSP) /* clear SUSPend bit */
|
||||
#define CLR_RESET (~ISTR_RESET) /* clear RESET bit */
|
||||
#define CLR_SOF (~ISTR_SOF) /* clear Start Of Frame bit */
|
||||
#define CLR_ESOF (~ISTR_ESOF) /* clear Expected Start Of Frame bit */
|
||||
|
||||
/******************************************************************************/
|
||||
/* CNTR control register bits definitions */
|
||||
/******************************************************************************/
|
||||
#define CNTR_CTRM (0x8000) /* Correct TRansfer Mask */
|
||||
#define CNTR_DOVRM (0x4000) /* DMA OVeR/underrun Mask */
|
||||
#define CNTR_ERRM (0x2000) /* ERRor Mask */
|
||||
#define CNTR_WKUPM (0x1000) /* WaKe UP Mask */
|
||||
#define CNTR_SUSPM (0x0800) /* SUSPend Mask */
|
||||
#define CNTR_RESETM (0x0400) /* RESET Mask */
|
||||
#define CNTR_SOFM (0x0200) /* Start Of Frame Mask */
|
||||
#define CNTR_ESOFM (0x0100) /* Expected Start Of Frame Mask */
|
||||
|
||||
|
||||
#define CNTR_RESUME (0x0010) /* RESUME request */
|
||||
#define CNTR_FSUSP (0x0008) /* Force SUSPend */
|
||||
#define CNTR_LPMODE (0x0004) /* Low-power MODE */
|
||||
#define CNTR_PDWN (0x0002) /* Power DoWN */
|
||||
#define CNTR_FRES (0x0001) /* Force USB RESet */
|
||||
|
||||
/******************************************************************************/
|
||||
/* FNR Frame Number Register bit definitions */
|
||||
/******************************************************************************/
|
||||
#define FNR_RXDP (0x8000) /* status of D+ data line */
|
||||
#define FNR_RXDM (0x4000) /* status of D- data line */
|
||||
#define FNR_LCK (0x2000) /* LoCKed */
|
||||
#define FNR_LSOF (0x1800) /* Lost SOF */
|
||||
#define FNR_FN (0x07FF) /* Frame Number */
|
||||
/******************************************************************************/
|
||||
/* DADDR Device ADDRess bit definitions */
|
||||
/******************************************************************************/
|
||||
#define DADDR_EF (0x80)
|
||||
#define DADDR_ADD (0x7F)
|
||||
/******************************************************************************/
|
||||
/* Endpoint register */
|
||||
/******************************************************************************/
|
||||
/* bit positions */
|
||||
#define EP_CTR_RX (0x8000) /* EndPoint Correct TRansfer RX */
|
||||
#define EP_DTOG_RX (0x4000) /* EndPoint Data TOGGLE RX */
|
||||
#define EPRX_STAT (0x3000) /* EndPoint RX STATus bit field */
|
||||
#define EP_SETUP (0x0800) /* EndPoint SETUP */
|
||||
#define EP_T_FIELD (0x0600) /* EndPoint TYPE */
|
||||
#define EP_KIND (0x0100) /* EndPoint KIND */
|
||||
#define EP_CTR_TX (0x0080) /* EndPoint Correct TRansfer TX */
|
||||
#define EP_DTOG_TX (0x0040) /* EndPoint Data TOGGLE TX */
|
||||
#define EPTX_STAT (0x0030) /* EndPoint TX STATus bit field */
|
||||
#define EPADDR_FIELD (0x000F) /* EndPoint ADDRess FIELD */
|
||||
|
||||
/* EndPoint REGister MASK (no toggle fields) */
|
||||
#define EPREG_MASK (EP_CTR_RX|EP_SETUP|EP_T_FIELD|EP_KIND|EP_CTR_TX|EPADDR_FIELD)
|
||||
|
||||
/* EP_TYPE[1:0] EndPoint TYPE */
|
||||
#define EP_TYPE_MASK (0x0600) /* EndPoint TYPE Mask */
|
||||
#define EP_BULK (0x0000) /* EndPoint BULK */
|
||||
#define EP_CONTROL (0x0200) /* EndPoint CONTROL */
|
||||
#define EP_ISOCHRONOUS (0x0400) /* EndPoint ISOCHRONOUS */
|
||||
#define EP_INTERRUPT (0x0600) /* EndPoint INTERRUPT */
|
||||
#define EP_T_MASK (~EP_T_FIELD & EPREG_MASK)
|
||||
|
||||
|
||||
/* EP_KIND EndPoint KIND */
|
||||
#define EPKIND_MASK (~EP_KIND & EPREG_MASK)
|
||||
|
||||
/* STAT_TX[1:0] STATus for TX transfer */
|
||||
#define EP_TX_DIS (0x0000) /* EndPoint TX DISabled */
|
||||
#define EP_TX_STALL (0x0010) /* EndPoint TX STALLed */
|
||||
#define EP_TX_NAK (0x0020) /* EndPoint TX NAKed */
|
||||
#define EP_TX_VALID (0x0030) /* EndPoint TX VALID */
|
||||
#define EPTX_DTOG1 (0x0010) /* EndPoint TX Data TOGgle bit1 */
|
||||
#define EPTX_DTOG2 (0x0020) /* EndPoint TX Data TOGgle bit2 */
|
||||
#define EPTX_DTOGMASK (EPTX_STAT|EPREG_MASK)
|
||||
|
||||
/* STAT_RX[1:0] STATus for RX transfer */
|
||||
#define EP_RX_DIS (0x0000) /* EndPoint RX DISabled */
|
||||
#define EP_RX_STALL (0x1000) /* EndPoint RX STALLed */
|
||||
#define EP_RX_NAK (0x2000) /* EndPoint RX NAKed */
|
||||
#define EP_RX_VALID (0x3000) /* EndPoint RX VALID */
|
||||
#define EPRX_DTOG1 (0x1000) /* EndPoint RX Data TOGgle bit1 */
|
||||
#define EPRX_DTOG2 (0x2000) /* EndPoint RX Data TOGgle bit1 */
|
||||
#define EPRX_DTOGMASK (EPRX_STAT|EPREG_MASK)
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/* SetCNTR */
|
||||
#define _SetCNTR(wRegValue) (*CNTR = (uint16_t)wRegValue)
|
||||
|
||||
/* SetISTR */
|
||||
#define _SetISTR(wRegValue) (*ISTR = (uint16_t)wRegValue)
|
||||
|
||||
/* SetDADDR */
|
||||
#define _SetDADDR(wRegValue) (*DADDR = (uint16_t)wRegValue)
|
||||
|
||||
/* SetBTABLE */
|
||||
#define _SetBTABLE(wRegValue)(*BTABLE = (uint16_t)(wRegValue & 0xFFF8))
|
||||
|
||||
/* GetCNTR */
|
||||
#define _GetCNTR() ((uint16_t) *CNTR)
|
||||
|
||||
/* GetISTR */
|
||||
#define _GetISTR() ((uint16_t) *ISTR)
|
||||
|
||||
/* GetFNR */
|
||||
#define _GetFNR() ((uint16_t) *FNR)
|
||||
|
||||
/* GetDADDR */
|
||||
#define _GetDADDR() ((uint16_t) *DADDR)
|
||||
|
||||
/* GetBTABLE */
|
||||
#define _GetBTABLE() ((uint16_t) *BTABLE)
|
||||
|
||||
/* SetENDPOINT */
|
||||
#define _SetENDPOINT(bEpNum,wRegValue) (*(EP0REG + bEpNum)= \
|
||||
(uint16_t)wRegValue)
|
||||
|
||||
/* GetENDPOINT */
|
||||
#define _GetENDPOINT(bEpNum) ((uint16_t)(*(EP0REG + bEpNum)))
|
||||
|
||||
/*******************************************************************************
|
||||
* Macro Name : SetEPType
|
||||
* Description : sets the type in the endpoint register(bits EP_TYPE[1:0])
|
||||
* Input : bEpNum: Endpoint Number.
|
||||
* wType
|
||||
* Output : None.
|
||||
* Return : None.
|
||||
*******************************************************************************/
|
||||
#define _SetEPType(bEpNum,wType) (_SetENDPOINT(bEpNum,\
|
||||
((_GetENDPOINT(bEpNum) & EP_T_MASK) | wType )))
|
||||
|
||||
/*******************************************************************************
|
||||
* Macro Name : GetEPType
|
||||
* Description : gets the type in the endpoint register(bits EP_TYPE[1:0])
|
||||
* Input : bEpNum: Endpoint Number.
|
||||
* Output : None.
|
||||
* Return : Endpoint Type
|
||||
*******************************************************************************/
|
||||
#define _GetEPType(bEpNum) (_GetENDPOINT(bEpNum) & EP_T_FIELD)
|
||||
|
||||
/*******************************************************************************
|
||||
* Macro Name : SetEPTxStatus
|
||||
* Description : sets the status for tx transfer (bits STAT_TX[1:0]).
|
||||
* Input : bEpNum: Endpoint Number.
|
||||
* wState: new state
|
||||
* Output : None.
|
||||
* Return : None.
|
||||
*******************************************************************************/
|
||||
#define _SetEPTxStatus(bEpNum,wState) {\
|
||||
register uint16_t _wRegVal; \
|
||||
_wRegVal = _GetENDPOINT(bEpNum) & EPTX_DTOGMASK;\
|
||||
/* toggle first bit ? */ \
|
||||
if((EPTX_DTOG1 & wState)!= 0) \
|
||||
_wRegVal ^= EPTX_DTOG1; \
|
||||
/* toggle second bit ? */ \
|
||||
if((EPTX_DTOG2 & wState)!= 0) \
|
||||
_wRegVal ^= EPTX_DTOG2; \
|
||||
_SetENDPOINT(bEpNum, (_wRegVal | EP_CTR_RX|EP_CTR_TX)); \
|
||||
} /* _SetEPTxStatus */
|
||||
|
||||
/*******************************************************************************
|
||||
* Macro Name : SetEPRxStatus
|
||||
* Description : sets the status for rx transfer (bits STAT_TX[1:0])
|
||||
* Input : bEpNum: Endpoint Number.
|
||||
* wState: new state.
|
||||
* Output : None.
|
||||
* Return : None.
|
||||
*******************************************************************************/
|
||||
#define _SetEPRxStatus(bEpNum,wState) {\
|
||||
register uint16_t _wRegVal; \
|
||||
\
|
||||
_wRegVal = _GetENDPOINT(bEpNum) & EPRX_DTOGMASK;\
|
||||
/* toggle first bit ? */ \
|
||||
if((EPRX_DTOG1 & wState)!= 0) \
|
||||
_wRegVal ^= EPRX_DTOG1; \
|
||||
/* toggle second bit ? */ \
|
||||
if((EPRX_DTOG2 & wState)!= 0) \
|
||||
_wRegVal ^= EPRX_DTOG2; \
|
||||
_SetENDPOINT(bEpNum, (_wRegVal | EP_CTR_RX|EP_CTR_TX)); \
|
||||
} /* _SetEPRxStatus */
|
||||
|
||||
/*******************************************************************************
|
||||
* Macro Name : SetEPRxTxStatus
|
||||
* Description : sets the status for rx & tx (bits STAT_TX[1:0] & STAT_RX[1:0])
|
||||
* Input : bEpNum: Endpoint Number.
|
||||
* wStaterx: new state.
|
||||
* wStatetx: new state.
|
||||
* Output : None.
|
||||
* Return : None.
|
||||
*******************************************************************************/
|
||||
#define _SetEPRxTxStatus(bEpNum,wStaterx,wStatetx) {\
|
||||
register uint32_t _wRegVal; \
|
||||
\
|
||||
_wRegVal = _GetENDPOINT(bEpNum) & (EPRX_DTOGMASK |EPTX_STAT) ;\
|
||||
/* toggle first bit ? */ \
|
||||
if((EPRX_DTOG1 & wStaterx)!= 0) \
|
||||
_wRegVal ^= EPRX_DTOG1; \
|
||||
/* toggle second bit ? */ \
|
||||
if((EPRX_DTOG2 & wStaterx)!= 0) \
|
||||
_wRegVal ^= EPRX_DTOG2; \
|
||||
/* toggle first bit ? */ \
|
||||
if((EPTX_DTOG1 & wStatetx)!= 0) \
|
||||
_wRegVal ^= EPTX_DTOG1; \
|
||||
/* toggle second bit ? */ \
|
||||
if((EPTX_DTOG2 & wStatetx)!= 0) \
|
||||
_wRegVal ^= EPTX_DTOG2; \
|
||||
_SetENDPOINT(bEpNum, _wRegVal | EP_CTR_RX|EP_CTR_TX); \
|
||||
} /* _SetEPRxTxStatus */
|
||||
/*******************************************************************************
|
||||
* Macro Name : GetEPTxStatus / GetEPRxStatus
|
||||
* Description : gets the status for tx/rx transfer (bits STAT_TX[1:0]
|
||||
* /STAT_RX[1:0])
|
||||
* Input : bEpNum: Endpoint Number.
|
||||
* Output : None.
|
||||
* Return : status .
|
||||
*******************************************************************************/
|
||||
#define _GetEPTxStatus(bEpNum) ((uint16_t)_GetENDPOINT(bEpNum) & EPTX_STAT)
|
||||
|
||||
#define _GetEPRxStatus(bEpNum) ((uint16_t)_GetENDPOINT(bEpNum) & EPRX_STAT)
|
||||
|
||||
/*******************************************************************************
|
||||
* Macro Name : SetEPTxValid / SetEPRxValid
|
||||
* Description : sets directly the VALID tx/rx-status into the enpoint register
|
||||
* Input : bEpNum: Endpoint Number.
|
||||
* Output : None.
|
||||
* Return : None.
|
||||
*******************************************************************************/
|
||||
#define _SetEPTxValid(bEpNum) (_SetEPTxStatus(bEpNum, EP_TX_VALID))
|
||||
|
||||
#define _SetEPRxValid(bEpNum) (_SetEPRxStatus(bEpNum, EP_RX_VALID))
|
||||
|
||||
/*******************************************************************************
|
||||
* Macro Name : GetTxStallStatus / GetRxStallStatus.
|
||||
* Description : checks stall condition in an endpoint.
|
||||
* Input : bEpNum: Endpoint Number.
|
||||
* Output : None.
|
||||
* Return : TRUE = endpoint in stall condition.
|
||||
*******************************************************************************/
|
||||
#define _GetTxStallStatus(bEpNum) (_GetEPTxStatus(bEpNum) \
|
||||
== EP_TX_STALL)
|
||||
#define _GetRxStallStatus(bEpNum) (_GetEPRxStatus(bEpNum) \
|
||||
== EP_RX_STALL)
|
||||
|
||||
/*******************************************************************************
|
||||
* Macro Name : SetEP_KIND / ClearEP_KIND.
|
||||
* Description : set & clear EP_KIND bit.
|
||||
* Input : bEpNum: Endpoint Number.
|
||||
* Output : None.
|
||||
* Return : None.
|
||||
*******************************************************************************/
|
||||
#define _SetEP_KIND(bEpNum) (_SetENDPOINT(bEpNum, \
|
||||
(EP_CTR_RX|EP_CTR_TX|((_GetENDPOINT(bEpNum) | EP_KIND) & EPREG_MASK))))
|
||||
#define _ClearEP_KIND(bEpNum) (_SetENDPOINT(bEpNum, \
|
||||
(EP_CTR_RX|EP_CTR_TX|(_GetENDPOINT(bEpNum) & EPKIND_MASK))))
|
||||
|
||||
/*******************************************************************************
|
||||
* Macro Name : Set_Status_Out / Clear_Status_Out.
|
||||
* Description : Sets/clears directly STATUS_OUT bit in the endpoint register.
|
||||
* Input : bEpNum: Endpoint Number.
|
||||
* Output : None.
|
||||
* Return : None.
|
||||
*******************************************************************************/
|
||||
#define _Set_Status_Out(bEpNum) _SetEP_KIND(bEpNum)
|
||||
#define _Clear_Status_Out(bEpNum) _ClearEP_KIND(bEpNum)
|
||||
|
||||
/*******************************************************************************
|
||||
* Macro Name : SetEPDoubleBuff / ClearEPDoubleBuff.
|
||||
* Description : Sets/clears directly EP_KIND bit in the endpoint register.
|
||||
* Input : bEpNum: Endpoint Number.
|
||||
* Output : None.
|
||||
* Return : None.
|
||||
*******************************************************************************/
|
||||
#define _SetEPDoubleBuff(bEpNum) _SetEP_KIND(bEpNum)
|
||||
#define _ClearEPDoubleBuff(bEpNum) _ClearEP_KIND(bEpNum)
|
||||
|
||||
/*******************************************************************************
|
||||
* Macro Name : ClearEP_CTR_RX / ClearEP_CTR_TX.
|
||||
* Description : Clears bit CTR_RX / CTR_TX in the endpoint register.
|
||||
* Input : bEpNum: Endpoint Number.
|
||||
* Output : None.
|
||||
* Return : None.
|
||||
*******************************************************************************/
|
||||
#define _ClearEP_CTR_RX(bEpNum) (_SetENDPOINT(bEpNum,\
|
||||
_GetENDPOINT(bEpNum) & 0x7FFF & EPREG_MASK))
|
||||
#define _ClearEP_CTR_TX(bEpNum) (_SetENDPOINT(bEpNum,\
|
||||
_GetENDPOINT(bEpNum) & 0xFF7F & EPREG_MASK))
|
||||
|
||||
/*******************************************************************************
|
||||
* Macro Name : ToggleDTOG_RX / ToggleDTOG_TX .
|
||||
* Description : Toggles DTOG_RX / DTOG_TX bit in the endpoint register.
|
||||
* Input : bEpNum: Endpoint Number.
|
||||
* Output : None.
|
||||
* Return : None.
|
||||
*******************************************************************************/
|
||||
#define _ToggleDTOG_RX(bEpNum) (_SetENDPOINT(bEpNum, \
|
||||
EP_CTR_RX|EP_CTR_TX|EP_DTOG_RX | (_GetENDPOINT(bEpNum) & EPREG_MASK)))
|
||||
#define _ToggleDTOG_TX(bEpNum) (_SetENDPOINT(bEpNum, \
|
||||
EP_CTR_RX|EP_CTR_TX|EP_DTOG_TX | (_GetENDPOINT(bEpNum) & EPREG_MASK)))
|
||||
|
||||
/*******************************************************************************
|
||||
* Macro Name : ClearDTOG_RX / ClearDTOG_TX.
|
||||
* Description : Clears DTOG_RX / DTOG_TX bit in the endpoint register.
|
||||
* Input : bEpNum: Endpoint Number.
|
||||
* Output : None.
|
||||
* Return : None.
|
||||
*******************************************************************************/
|
||||
#define _ClearDTOG_RX(bEpNum) if((_GetENDPOINT(bEpNum) & EP_DTOG_RX) != 0)\
|
||||
_ToggleDTOG_RX(bEpNum)
|
||||
#define _ClearDTOG_TX(bEpNum) if((_GetENDPOINT(bEpNum) & EP_DTOG_TX) != 0)\
|
||||
_ToggleDTOG_TX(bEpNum)
|
||||
/*******************************************************************************
|
||||
* Macro Name : SetEPAddress.
|
||||
* Description : Sets address in an endpoint register.
|
||||
* Input : bEpNum: Endpoint Number.
|
||||
* bAddr: Address.
|
||||
* Output : None.
|
||||
* Return : None.
|
||||
*******************************************************************************/
|
||||
#define _SetEPAddress(bEpNum,bAddr) _SetENDPOINT(bEpNum,\
|
||||
EP_CTR_RX|EP_CTR_TX|(_GetENDPOINT(bEpNum) & EPREG_MASK) | bAddr)
|
||||
|
||||
/*******************************************************************************
|
||||
* Macro Name : GetEPAddress.
|
||||
* Description : Gets address in an endpoint register.
|
||||
* Input : bEpNum: Endpoint Number.
|
||||
* Output : None.
|
||||
* Return : None.
|
||||
*******************************************************************************/
|
||||
#define _GetEPAddress(bEpNum) ((uint8_t)(_GetENDPOINT(bEpNum) & EPADDR_FIELD))
|
||||
|
||||
#define _pEPTxAddr(bEpNum) ((uint32_t *)((_GetBTABLE()+bEpNum*8 )*2 + PMAAddr))
|
||||
#define _pEPTxCount(bEpNum) ((uint32_t *)((_GetBTABLE()+bEpNum*8+2)*2 + PMAAddr))
|
||||
#define _pEPRxAddr(bEpNum) ((uint32_t *)((_GetBTABLE()+bEpNum*8+4)*2 + PMAAddr))
|
||||
#define _pEPRxCount(bEpNum) ((uint32_t *)((_GetBTABLE()+bEpNum*8+6)*2 + PMAAddr))
|
||||
|
||||
/*******************************************************************************
|
||||
* Macro Name : SetEPTxAddr / SetEPRxAddr.
|
||||
* Description : sets address of the tx/rx buffer.
|
||||
* Input : bEpNum: Endpoint Number.
|
||||
* wAddr: address to be set (must be word aligned).
|
||||
* Output : None.
|
||||
* Return : None.
|
||||
*******************************************************************************/
|
||||
#define _SetEPTxAddr(bEpNum,wAddr) (*_pEPTxAddr(bEpNum) = ((wAddr >> 1) << 1))
|
||||
#define _SetEPRxAddr(bEpNum,wAddr) (*_pEPRxAddr(bEpNum) = ((wAddr >> 1) << 1))
|
||||
|
||||
/*******************************************************************************
|
||||
* Macro Name : GetEPTxAddr / GetEPRxAddr.
|
||||
* Description : Gets address of the tx/rx buffer.
|
||||
* Input : bEpNum: Endpoint Number.
|
||||
* Output : None.
|
||||
* Return : address of the buffer.
|
||||
*******************************************************************************/
|
||||
#define _GetEPTxAddr(bEpNum) ((uint16_t)*_pEPTxAddr(bEpNum))
|
||||
#define _GetEPRxAddr(bEpNum) ((uint16_t)*_pEPRxAddr(bEpNum))
|
||||
|
||||
/*******************************************************************************
|
||||
* Macro Name : SetEPCountRxReg.
|
||||
* Description : Sets counter of rx buffer with no. of blocks.
|
||||
* Input : pdwReg: pointer to counter.
|
||||
* wCount: Counter.
|
||||
* Output : None.
|
||||
* Return : None.
|
||||
*******************************************************************************/
|
||||
#define _BlocksOf32(dwReg,wCount,wNBlocks) {\
|
||||
wNBlocks = wCount >> 5;\
|
||||
if((wCount & 0x1f) == 0)\
|
||||
wNBlocks--;\
|
||||
*pdwReg = (uint32_t)((wNBlocks << 10) | 0x8000);\
|
||||
}/* _BlocksOf32 */
|
||||
|
||||
#define _BlocksOf2(dwReg,wCount,wNBlocks) {\
|
||||
wNBlocks = wCount >> 1;\
|
||||
if((wCount & 0x1) != 0)\
|
||||
wNBlocks++;\
|
||||
*pdwReg = (uint32_t)(wNBlocks << 10);\
|
||||
}/* _BlocksOf2 */
|
||||
|
||||
#define _SetEPCountRxReg(dwReg,wCount) {\
|
||||
uint16_t wNBlocks;\
|
||||
if(wCount > 62){_BlocksOf32(dwReg,wCount,wNBlocks);}\
|
||||
else {_BlocksOf2(dwReg,wCount,wNBlocks);}\
|
||||
}/* _SetEPCountRxReg */
|
||||
|
||||
|
||||
|
||||
#define _SetEPRxDblBuf0Count(bEpNum,wCount) {\
|
||||
uint32_t *pdwReg = _pEPTxCount(bEpNum); \
|
||||
_SetEPCountRxReg(pdwReg, wCount);\
|
||||
}
|
||||
/*******************************************************************************
|
||||
* Macro Name : SetEPTxCount / SetEPRxCount.
|
||||
* Description : sets counter for the tx/rx buffer.
|
||||
* Input : bEpNum: endpoint number.
|
||||
* wCount: Counter value.
|
||||
* Output : None.
|
||||
* Return : None.
|
||||
*******************************************************************************/
|
||||
#define _SetEPTxCount(bEpNum,wCount) (*_pEPTxCount(bEpNum) = wCount)
|
||||
#define _SetEPRxCount(bEpNum,wCount) {\
|
||||
uint32_t *pdwReg = _pEPRxCount(bEpNum); \
|
||||
_SetEPCountRxReg(pdwReg, wCount);\
|
||||
}
|
||||
/*******************************************************************************
|
||||
* Macro Name : GetEPTxCount / GetEPRxCount.
|
||||
* Description : gets counter of the tx buffer.
|
||||
* Input : bEpNum: endpoint number.
|
||||
* Output : None.
|
||||
* Return : Counter value.
|
||||
*******************************************************************************/
|
||||
#define _GetEPTxCount(bEpNum)((uint16_t)(*_pEPTxCount(bEpNum)) & 0x3ff)
|
||||
#define _GetEPRxCount(bEpNum)((uint16_t)(*_pEPRxCount(bEpNum)) & 0x3ff)
|
||||
|
||||
/*******************************************************************************
|
||||
* Macro Name : SetEPDblBuf0Addr / SetEPDblBuf1Addr.
|
||||
* Description : Sets buffer 0/1 address in a double buffer endpoint.
|
||||
* Input : bEpNum: endpoint number.
|
||||
* : wBuf0Addr: buffer 0 address.
|
||||
* Output : None.
|
||||
* Return : None.
|
||||
*******************************************************************************/
|
||||
#define _SetEPDblBuf0Addr(bEpNum,wBuf0Addr) {_SetEPTxAddr(bEpNum, wBuf0Addr);}
|
||||
#define _SetEPDblBuf1Addr(bEpNum,wBuf1Addr) {_SetEPRxAddr(bEpNum, wBuf1Addr);}
|
||||
|
||||
/*******************************************************************************
|
||||
* Macro Name : SetEPDblBuffAddr.
|
||||
* Description : Sets addresses in a double buffer endpoint.
|
||||
* Input : bEpNum: endpoint number.
|
||||
* : wBuf0Addr: buffer 0 address.
|
||||
* : wBuf1Addr = buffer 1 address.
|
||||
* Output : None.
|
||||
* Return : None.
|
||||
*******************************************************************************/
|
||||
#define _SetEPDblBuffAddr(bEpNum,wBuf0Addr,wBuf1Addr) { \
|
||||
_SetEPDblBuf0Addr(bEpNum, wBuf0Addr);\
|
||||
_SetEPDblBuf1Addr(bEpNum, wBuf1Addr);\
|
||||
} /* _SetEPDblBuffAddr */
|
||||
|
||||
/*******************************************************************************
|
||||
* Macro Name : GetEPDblBuf0Addr / GetEPDblBuf1Addr.
|
||||
* Description : Gets buffer 0/1 address of a double buffer endpoint.
|
||||
* Input : bEpNum: endpoint number.
|
||||
* Output : None.
|
||||
* Return : None.
|
||||
*******************************************************************************/
|
||||
#define _GetEPDblBuf0Addr(bEpNum) (_GetEPTxAddr(bEpNum))
|
||||
#define _GetEPDblBuf1Addr(bEpNum) (_GetEPRxAddr(bEpNum))
|
||||
|
||||
/*******************************************************************************
|
||||
* Macro Name : SetEPDblBuffCount / SetEPDblBuf0Count / SetEPDblBuf1Count.
|
||||
* Description : Gets buffer 0/1 address of a double buffer endpoint.
|
||||
* Input : bEpNum: endpoint number.
|
||||
* : bDir: endpoint dir EP_DBUF_OUT = OUT
|
||||
* EP_DBUF_IN = IN
|
||||
* : wCount: Counter value
|
||||
* Output : None.
|
||||
* Return : None.
|
||||
*******************************************************************************/
|
||||
#define _SetEPDblBuf0Count(bEpNum, bDir, wCount) { \
|
||||
if(bDir == EP_DBUF_OUT)\
|
||||
/* OUT endpoint */ \
|
||||
{_SetEPRxDblBuf0Count(bEpNum,wCount);} \
|
||||
else if(bDir == EP_DBUF_IN)\
|
||||
/* IN endpoint */ \
|
||||
*_pEPTxCount(bEpNum) = (uint32_t)wCount; \
|
||||
} /* SetEPDblBuf0Count*/
|
||||
|
||||
#define _SetEPDblBuf1Count(bEpNum, bDir, wCount) { \
|
||||
if(bDir == EP_DBUF_OUT)\
|
||||
/* OUT endpoint */ \
|
||||
{_SetEPRxCount(bEpNum,wCount);}\
|
||||
else if(bDir == EP_DBUF_IN)\
|
||||
/* IN endpoint */\
|
||||
*_pEPRxCount(bEpNum) = (uint32_t)wCount; \
|
||||
} /* SetEPDblBuf1Count */
|
||||
|
||||
#define _SetEPDblBuffCount(bEpNum, bDir, wCount) {\
|
||||
_SetEPDblBuf0Count(bEpNum, bDir, wCount); \
|
||||
_SetEPDblBuf1Count(bEpNum, bDir, wCount); \
|
||||
} /* _SetEPDblBuffCount */
|
||||
|
||||
/*******************************************************************************
|
||||
* Macro Name : GetEPDblBuf0Count / GetEPDblBuf1Count.
|
||||
* Description : Gets buffer 0/1 rx/tx counter for double buffering.
|
||||
* Input : bEpNum: endpoint number.
|
||||
* Output : None.
|
||||
* Return : None.
|
||||
*******************************************************************************/
|
||||
#define _GetEPDblBuf0Count(bEpNum) (_GetEPTxCount(bEpNum))
|
||||
#define _GetEPDblBuf1Count(bEpNum) (_GetEPRxCount(bEpNum))
|
||||
|
||||
|
||||
/* External variables --------------------------------------------------------*/
|
||||
extern volatile uint16_t wIstr; /* ISTR register last read value */
|
||||
|
||||
/* Exported functions ------------------------------------------------------- */
|
||||
void SetCNTR(uint16_t /*wRegValue*/);
|
||||
void SetISTR(uint16_t /*wRegValue*/);
|
||||
void SetDADDR(uint16_t /*wRegValue*/);
|
||||
void SetBTABLE(uint16_t /*wRegValue*/);
|
||||
void SetBTABLE(uint16_t /*wRegValue*/);
|
||||
uint16_t GetCNTR(void);
|
||||
uint16_t GetISTR(void);
|
||||
uint16_t GetFNR(void);
|
||||
uint16_t GetDADDR(void);
|
||||
uint16_t GetBTABLE(void);
|
||||
void SetENDPOINT(uint8_t /*bEpNum*/, uint16_t /*wRegValue*/);
|
||||
uint16_t GetENDPOINT(uint8_t /*bEpNum*/);
|
||||
void SetEPType(uint8_t /*bEpNum*/, uint16_t /*wType*/);
|
||||
uint16_t GetEPType(uint8_t /*bEpNum*/);
|
||||
void SetEPTxStatus(uint8_t /*bEpNum*/, uint16_t /*wState*/);
|
||||
void SetEPRxStatus(uint8_t /*bEpNum*/, uint16_t /*wState*/);
|
||||
void SetDouBleBuffEPStall(uint8_t /*bEpNum*/, uint8_t bDir);
|
||||
uint16_t GetEPTxStatus(uint8_t /*bEpNum*/);
|
||||
uint16_t GetEPRxStatus(uint8_t /*bEpNum*/);
|
||||
void SetEPTxValid(uint8_t /*bEpNum*/);
|
||||
void SetEPRxValid(uint8_t /*bEpNum*/);
|
||||
uint16_t GetTxStallStatus(uint8_t /*bEpNum*/);
|
||||
uint16_t GetRxStallStatus(uint8_t /*bEpNum*/);
|
||||
void SetEP_KIND(uint8_t /*bEpNum*/);
|
||||
void ClearEP_KIND(uint8_t /*bEpNum*/);
|
||||
void Set_Status_Out(uint8_t /*bEpNum*/);
|
||||
void Clear_Status_Out(uint8_t /*bEpNum*/);
|
||||
void SetEPDoubleBuff(uint8_t /*bEpNum*/);
|
||||
void ClearEPDoubleBuff(uint8_t /*bEpNum*/);
|
||||
void ClearEP_CTR_RX(uint8_t /*bEpNum*/);
|
||||
void ClearEP_CTR_TX(uint8_t /*bEpNum*/);
|
||||
void ToggleDTOG_RX(uint8_t /*bEpNum*/);
|
||||
void ToggleDTOG_TX(uint8_t /*bEpNum*/);
|
||||
void ClearDTOG_RX(uint8_t /*bEpNum*/);
|
||||
void ClearDTOG_TX(uint8_t /*bEpNum*/);
|
||||
void SetEPAddress(uint8_t /*bEpNum*/, uint8_t /*bAddr*/);
|
||||
uint8_t GetEPAddress(uint8_t /*bEpNum*/);
|
||||
void SetEPTxAddr(uint8_t /*bEpNum*/, uint16_t /*wAddr*/);
|
||||
void SetEPRxAddr(uint8_t /*bEpNum*/, uint16_t /*wAddr*/);
|
||||
uint16_t GetEPTxAddr(uint8_t /*bEpNum*/);
|
||||
uint16_t GetEPRxAddr(uint8_t /*bEpNum*/);
|
||||
void SetEPCountRxReg(uint32_t * /*pdwReg*/, uint16_t /*wCount*/);
|
||||
void SetEPTxCount(uint8_t /*bEpNum*/, uint16_t /*wCount*/);
|
||||
void SetEPRxCount(uint8_t /*bEpNum*/, uint16_t /*wCount*/);
|
||||
uint16_t GetEPTxCount(uint8_t /*bEpNum*/);
|
||||
uint16_t GetEPRxCount(uint8_t /*bEpNum*/);
|
||||
void SetEPDblBuf0Addr(uint8_t /*bEpNum*/, uint16_t /*wBuf0Addr*/);
|
||||
void SetEPDblBuf1Addr(uint8_t /*bEpNum*/, uint16_t /*wBuf1Addr*/);
|
||||
void SetEPDblBuffAddr(uint8_t /*bEpNum*/, uint16_t /*wBuf0Addr*/, uint16_t /*wBuf1Addr*/);
|
||||
uint16_t GetEPDblBuf0Addr(uint8_t /*bEpNum*/);
|
||||
uint16_t GetEPDblBuf1Addr(uint8_t /*bEpNum*/);
|
||||
void SetEPDblBuffCount(uint8_t /*bEpNum*/, uint8_t /*bDir*/, uint16_t /*wCount*/);
|
||||
void SetEPDblBuf0Count(uint8_t /*bEpNum*/, uint8_t /*bDir*/, uint16_t /*wCount*/);
|
||||
void SetEPDblBuf1Count(uint8_t /*bEpNum*/, uint8_t /*bDir*/, uint16_t /*wCount*/);
|
||||
uint16_t GetEPDblBuf0Count(uint8_t /*bEpNum*/);
|
||||
uint16_t GetEPDblBuf1Count(uint8_t /*bEpNum*/);
|
||||
EP_DBUF_DIR GetEPDblBufDir(uint8_t /*bEpNum*/);
|
||||
void FreeUserBuffer(uint8_t bEpNum/*bEpNum*/, uint8_t bDir);
|
||||
uint16_t ToWord(uint8_t, uint8_t);
|
||||
uint16_t ByteSwap(uint16_t);
|
||||
|
||||
#endif /* __USB_REGS_H */
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
@@ -1,47 +0,0 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file usb_sil.h
|
||||
* @author MCD Application Team
|
||||
* @version V4.0.0
|
||||
* @date 28-August-2012
|
||||
* @brief Simplified Interface Layer function prototypes.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© COPYRIGHT 2012 STMicroelectronics</center></h2>
|
||||
*
|
||||
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
|
||||
* You may not use this file except in compliance with the License.
|
||||
* You may obtain a copy of the License at:
|
||||
*
|
||||
* http://www.st.com/software_license_agreement_liberty_v2
|
||||
*
|
||||
* Unless required by applicable law or agreed to in writing, software
|
||||
* distributed under the License is distributed on an "AS IS" BASIS,
|
||||
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
* See the License for the specific language governing permissions and
|
||||
* limitations under the License.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __USB_SIL_H
|
||||
#define __USB_SIL_H
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/* Exported functions ------------------------------------------------------- */
|
||||
|
||||
uint32_t USB_SIL_Init(void);
|
||||
uint32_t USB_SIL_Write(uint8_t bEpAddr, uint8_t* pBufferPointer, uint32_t wBufferSize);
|
||||
uint32_t USB_SIL_Read(uint8_t bEpAddr, uint8_t* pBufferPointer);
|
||||
|
||||
/* External variables --------------------------------------------------------*/
|
||||
|
||||
#endif /* __USB_SIL_H */
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
@@ -1,54 +0,0 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file usb_type.h
|
||||
* @author MCD Application Team
|
||||
* @version V4.0.0
|
||||
* @date 28-August-2012
|
||||
* @brief Type definitions used by the USB Library
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© COPYRIGHT 2012 STMicroelectronics</center></h2>
|
||||
*
|
||||
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
|
||||
* You may not use this file except in compliance with the License.
|
||||
* You may obtain a copy of the License at:
|
||||
*
|
||||
* http://www.st.com/software_license_agreement_liberty_v2
|
||||
*
|
||||
* Unless required by applicable law or agreed to in writing, software
|
||||
* distributed under the License is distributed on an "AS IS" BASIS,
|
||||
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
* See the License for the specific language governing permissions and
|
||||
* limitations under the License.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __USB_TYPE_H
|
||||
#define __USB_TYPE_H
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include <usb_conf.h>
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
#ifndef NULL
|
||||
#define NULL ((void *)0)
|
||||
#endif
|
||||
|
||||
typedef enum
|
||||
{
|
||||
FALSE = 0, TRUE = !FALSE
|
||||
}
|
||||
bool;
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/* Exported functions ------------------------------------------------------- */
|
||||
/* External variables --------------------------------------------------------*/
|
||||
|
||||
#endif /* __USB_TYPE_H */
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
File diff suppressed because it is too large
Load Diff
@@ -1,76 +0,0 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file usb_init.c
|
||||
* @author MCD Application Team
|
||||
* @version V4.0.0
|
||||
* @date 28-August-2012
|
||||
* @brief Initialization routines & global variables
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© COPYRIGHT 2012 STMicroelectronics</center></h2>
|
||||
*
|
||||
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
|
||||
* You may not use this file except in compliance with the License.
|
||||
* You may obtain a copy of the License at:
|
||||
*
|
||||
* http://www.st.com/software_license_agreement_liberty_v2
|
||||
*
|
||||
* Unless required by applicable law or agreed to in writing, software
|
||||
* distributed under the License is distributed on an "AS IS" BASIS,
|
||||
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
* See the License for the specific language governing permissions and
|
||||
* limitations under the License.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "usb_lib.h"
|
||||
|
||||
/* Private typedef -----------------------------------------------------------*/
|
||||
/* Private define ------------------------------------------------------------*/
|
||||
/* Private macro -------------------------------------------------------------*/
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
/* The number of current endpoint, it will be used to specify an endpoint */
|
||||
uint8_t EPindex;
|
||||
/* The number of current device, it is an index to the Device_Table */
|
||||
/* uint8_t Device_no; */
|
||||
/* Points to the DEVICE_INFO structure of current device */
|
||||
/* The purpose of this register is to speed up the execution */
|
||||
DEVICE_INFO *pInformation;
|
||||
/* Points to the DEVICE_PROP structure of current device */
|
||||
/* The purpose of this register is to speed up the execution */
|
||||
DEVICE_PROP *pProperty;
|
||||
/* Temporary save the state of Rx & Tx status. */
|
||||
/* Whenever the Rx or Tx state is changed, its value is saved */
|
||||
/* in this variable first and will be set to the EPRB or EPRA */
|
||||
/* at the end of interrupt process */
|
||||
uint16_t SaveState ;
|
||||
uint16_t wInterrupt_Mask;
|
||||
DEVICE_INFO Device_Info;
|
||||
USER_STANDARD_REQUESTS *pUser_Standard_Requests;
|
||||
|
||||
/* Extern variables ----------------------------------------------------------*/
|
||||
/* Private function prototypes -----------------------------------------------*/
|
||||
/* Private functions ---------------------------------------------------------*/
|
||||
|
||||
/*******************************************************************************
|
||||
* Function Name : USB_Init
|
||||
* Description : USB system initialization
|
||||
* Input : None.
|
||||
* Output : None.
|
||||
* Return : None.
|
||||
*******************************************************************************/
|
||||
void USB_Init(void)
|
||||
{
|
||||
pInformation = &Device_Info;
|
||||
pInformation->ControlState = 2;
|
||||
pProperty = &Device_Property;
|
||||
pUser_Standard_Requests = &User_Standard_Requests;
|
||||
/* Initialize devices one by one */
|
||||
pProperty->Init();
|
||||
}
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
@@ -1,195 +0,0 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file usb_int.c
|
||||
* @author MCD Application Team
|
||||
* @version V4.0.0
|
||||
* @date 28-August-2012
|
||||
* @brief Endpoint CTR (Low and High) interrupt's service routines
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© COPYRIGHT 2012 STMicroelectronics</center></h2>
|
||||
*
|
||||
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
|
||||
* You may not use this file except in compliance with the License.
|
||||
* You may obtain a copy of the License at:
|
||||
*
|
||||
* http://www.st.com/software_license_agreement_liberty_v2
|
||||
*
|
||||
* Unless required by applicable law or agreed to in writing, software
|
||||
* distributed under the License is distributed on an "AS IS" BASIS,
|
||||
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
* See the License for the specific language governing permissions and
|
||||
* limitations under the License.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "usb_lib.h"
|
||||
|
||||
/* Private typedef -----------------------------------------------------------*/
|
||||
/* Private define ------------------------------------------------------------*/
|
||||
/* Private macro -------------------------------------------------------------*/
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
__IO uint16_t SaveRState;
|
||||
__IO uint16_t SaveTState;
|
||||
|
||||
/* Extern variables ----------------------------------------------------------*/
|
||||
extern void (*pEpInt_IN[7])(void); /* Handles IN interrupts */
|
||||
extern void (*pEpInt_OUT[7])(void); /* Handles OUT interrupts */
|
||||
|
||||
/* Private function prototypes -----------------------------------------------*/
|
||||
/* Private functions ---------------------------------------------------------*/
|
||||
|
||||
/*******************************************************************************
|
||||
* Function Name : CTR_LP.
|
||||
* Description : Low priority Endpoint Correct Transfer interrupt's service
|
||||
* routine.
|
||||
* Input : None.
|
||||
* Output : None.
|
||||
* Return : None.
|
||||
*******************************************************************************/
|
||||
void CTR_LP(void)
|
||||
{
|
||||
__IO uint16_t wEPVal = 0;
|
||||
/* stay in loop while pending interrupts */
|
||||
while (((wIstr = _GetISTR()) & ISTR_CTR) != 0)
|
||||
{
|
||||
/* extract highest priority endpoint number */
|
||||
EPindex = (uint8_t)(wIstr & ISTR_EP_ID);
|
||||
if (EPindex == 0)
|
||||
{
|
||||
/* Decode and service control endpoint interrupt */
|
||||
/* calling related service routine */
|
||||
/* (Setup0_Process, In0_Process, Out0_Process) */
|
||||
|
||||
/* save RX & TX status */
|
||||
/* and set both to NAK */
|
||||
|
||||
SaveRState = _GetENDPOINT(ENDP0);
|
||||
SaveTState = SaveRState & EPTX_STAT;
|
||||
SaveRState &= EPRX_STAT;
|
||||
|
||||
_SetEPRxTxStatus(ENDP0,EP_RX_NAK,EP_TX_NAK);
|
||||
|
||||
/* DIR bit = origin of the interrupt */
|
||||
|
||||
if ((wIstr & ISTR_DIR) == 0)
|
||||
{
|
||||
/* DIR = 0 */
|
||||
|
||||
/* DIR = 0 => IN int */
|
||||
/* DIR = 0 implies that (EP_CTR_TX = 1) always */
|
||||
|
||||
_ClearEP_CTR_TX(ENDP0);
|
||||
In0_Process();
|
||||
|
||||
/* before terminate set Tx & Rx status */
|
||||
|
||||
_SetEPRxTxStatus(ENDP0,SaveRState,SaveTState);
|
||||
return;
|
||||
}
|
||||
else
|
||||
{
|
||||
/* DIR = 1 */
|
||||
|
||||
/* DIR = 1 & CTR_RX => SETUP or OUT int */
|
||||
/* DIR = 1 & (CTR_TX | CTR_RX) => 2 int pending */
|
||||
|
||||
wEPVal = _GetENDPOINT(ENDP0);
|
||||
|
||||
if ((wEPVal &EP_SETUP) != 0)
|
||||
{
|
||||
_ClearEP_CTR_RX(ENDP0); /* SETUP bit kept frozen while CTR_RX = 1 */
|
||||
Setup0_Process();
|
||||
/* before terminate set Tx & Rx status */
|
||||
|
||||
_SetEPRxTxStatus(ENDP0,SaveRState,SaveTState);
|
||||
return;
|
||||
}
|
||||
|
||||
else if ((wEPVal & EP_CTR_RX) != 0)
|
||||
{
|
||||
_ClearEP_CTR_RX(ENDP0);
|
||||
Out0_Process();
|
||||
/* before terminate set Tx & Rx status */
|
||||
|
||||
_SetEPRxTxStatus(ENDP0,SaveRState,SaveTState);
|
||||
return;
|
||||
}
|
||||
}
|
||||
}/* if(EPindex == 0) */
|
||||
else
|
||||
{
|
||||
/* Decode and service non control endpoints interrupt */
|
||||
|
||||
/* process related endpoint register */
|
||||
wEPVal = _GetENDPOINT(EPindex);
|
||||
if ((wEPVal & EP_CTR_RX) != 0)
|
||||
{
|
||||
/* clear int flag */
|
||||
_ClearEP_CTR_RX(EPindex);
|
||||
|
||||
/* call OUT service function */
|
||||
(*pEpInt_OUT[EPindex-1])();
|
||||
|
||||
} /* if((wEPVal & EP_CTR_RX) */
|
||||
|
||||
if ((wEPVal & EP_CTR_TX) != 0)
|
||||
{
|
||||
/* clear int flag */
|
||||
_ClearEP_CTR_TX(EPindex);
|
||||
|
||||
/* call IN service function */
|
||||
(*pEpInt_IN[EPindex-1])();
|
||||
} /* if((wEPVal & EP_CTR_TX) != 0) */
|
||||
|
||||
}/* if(EPindex == 0) else */
|
||||
|
||||
}/* while(...) */
|
||||
}
|
||||
|
||||
/*******************************************************************************
|
||||
* Function Name : CTR_HP.
|
||||
* Description : High Priority Endpoint Correct Transfer interrupt's service
|
||||
* routine.
|
||||
* Input : None.
|
||||
* Output : None.
|
||||
* Return : None.
|
||||
*******************************************************************************/
|
||||
void CTR_HP(void)
|
||||
{
|
||||
uint32_t wEPVal = 0;
|
||||
|
||||
while (((wIstr = _GetISTR()) & ISTR_CTR) != 0)
|
||||
{
|
||||
_SetISTR((uint16_t)CLR_CTR); /* clear CTR flag */
|
||||
/* extract highest priority endpoint number */
|
||||
EPindex = (uint8_t)(wIstr & ISTR_EP_ID);
|
||||
/* process related endpoint register */
|
||||
wEPVal = _GetENDPOINT(EPindex);
|
||||
if ((wEPVal & EP_CTR_RX) != 0)
|
||||
{
|
||||
/* clear int flag */
|
||||
_ClearEP_CTR_RX(EPindex);
|
||||
|
||||
/* call OUT service function */
|
||||
(*pEpInt_OUT[EPindex-1])();
|
||||
|
||||
} /* if((wEPVal & EP_CTR_RX) */
|
||||
else if ((wEPVal & EP_CTR_TX) != 0)
|
||||
{
|
||||
/* clear int flag */
|
||||
_ClearEP_CTR_TX(EPindex);
|
||||
|
||||
/* call IN service function */
|
||||
(*pEpInt_IN[EPindex-1])();
|
||||
|
||||
|
||||
} /* if((wEPVal & EP_CTR_TX) != 0) */
|
||||
|
||||
}/* while(...) */
|
||||
}
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
@@ -1,87 +0,0 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file usb_mem.c
|
||||
* @author MCD Application Team
|
||||
* @version V4.0.0
|
||||
* @date 28-August-2012
|
||||
* @brief Utility functions for memory transfers to/from PMA
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© COPYRIGHT 2012 STMicroelectronics</center></h2>
|
||||
*
|
||||
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
|
||||
* You may not use this file except in compliance with the License.
|
||||
* You may obtain a copy of the License at:
|
||||
*
|
||||
* http://www.st.com/software_license_agreement_liberty_v2
|
||||
*
|
||||
* Unless required by applicable law or agreed to in writing, software
|
||||
* distributed under the License is distributed on an "AS IS" BASIS,
|
||||
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
* See the License for the specific language governing permissions and
|
||||
* limitations under the License.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "usb_lib.h"
|
||||
|
||||
/* Private typedef -----------------------------------------------------------*/
|
||||
/* Private define ------------------------------------------------------------*/
|
||||
/* Private macro -------------------------------------------------------------*/
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
/* Extern variables ----------------------------------------------------------*/
|
||||
/* Private function prototypes -----------------------------------------------*/
|
||||
/* Private functions ---------------------------------------------------------*/
|
||||
|
||||
/*******************************************************************************
|
||||
* Function Name : UserToPMABufferCopy
|
||||
* Description : Copy a buffer from user memory area to packet memory area (PMA)
|
||||
* Input : - pbUsrBuf: pointer to user memory area.
|
||||
* - wPMABufAddr: address into PMA.
|
||||
* - wNBytes: no. of bytes to be copied.
|
||||
* Output : None.
|
||||
* Return : None .
|
||||
*******************************************************************************/
|
||||
void UserToPMABufferCopy(uint8_t *pbUsrBuf, uint16_t wPMABufAddr, uint16_t wNBytes)
|
||||
{
|
||||
uint32_t n = (wNBytes + 1) >> 1; /* n = (wNBytes + 1) / 2 */
|
||||
uint32_t i, temp1, temp2;
|
||||
uint16_t *pdwVal;
|
||||
pdwVal = (uint16_t *)(wPMABufAddr * 2 + PMAAddr);
|
||||
for (i = n; i != 0; i--)
|
||||
{
|
||||
temp1 = (uint16_t) * pbUsrBuf;
|
||||
pbUsrBuf++;
|
||||
temp2 = temp1 | (uint16_t) * pbUsrBuf << 8;
|
||||
*pdwVal++ = temp2;
|
||||
pdwVal++;
|
||||
pbUsrBuf++;
|
||||
}
|
||||
}
|
||||
|
||||
/*******************************************************************************
|
||||
* Function Name : PMAToUserBufferCopy
|
||||
* Description : Copy a buffer from user memory area to packet memory area (PMA)
|
||||
* Input : - pbUsrBuf = pointer to user memory area.
|
||||
* - wPMABufAddr = address into PMA.
|
||||
* - wNBytes = no. of bytes to be copied.
|
||||
* Output : None.
|
||||
* Return : None.
|
||||
*******************************************************************************/
|
||||
void PMAToUserBufferCopy(uint8_t *pbUsrBuf, uint16_t wPMABufAddr, uint16_t wNBytes)
|
||||
{
|
||||
uint32_t n = (wNBytes + 1) >> 1;/* /2*/
|
||||
uint32_t i;
|
||||
uint32_t *pdwVal;
|
||||
pdwVal = (uint32_t *)(wPMABufAddr * 2 + PMAAddr);
|
||||
for (i = n; i != 0; i--)
|
||||
{
|
||||
*(uint16_t*)pbUsrBuf++ = *pdwVal++;
|
||||
pbUsrBuf++;
|
||||
}
|
||||
}
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
@@ -1,760 +0,0 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file usb_regs.c
|
||||
* @author MCD Application Team
|
||||
* @version V4.0.0
|
||||
* @date 28-August-2012
|
||||
* @brief Interface functions to USB cell registers
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© COPYRIGHT 2012 STMicroelectronics</center></h2>
|
||||
*
|
||||
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
|
||||
* You may not use this file except in compliance with the License.
|
||||
* You may obtain a copy of the License at:
|
||||
*
|
||||
* http://www.st.com/software_license_agreement_liberty_v2
|
||||
*
|
||||
* Unless required by applicable law or agreed to in writing, software
|
||||
* distributed under the License is distributed on an "AS IS" BASIS,
|
||||
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
* See the License for the specific language governing permissions and
|
||||
* limitations under the License.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "usb_lib.h"
|
||||
|
||||
/* Private typedef -----------------------------------------------------------*/
|
||||
/* Private define ------------------------------------------------------------*/
|
||||
/* Private macro -------------------------------------------------------------*/
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
/* Extern variables ----------------------------------------------------------*/
|
||||
/* Private function prototypes -----------------------------------------------*/
|
||||
/* Private functions ---------------------------------------------------------*/
|
||||
|
||||
/*******************************************************************************
|
||||
* Function Name : SetCNTR.
|
||||
* Description : Set the CNTR register value.
|
||||
* Input : wRegValue: new register value.
|
||||
* Output : None.
|
||||
* Return : None.
|
||||
*******************************************************************************/
|
||||
void SetCNTR(uint16_t wRegValue)
|
||||
{
|
||||
_SetCNTR(wRegValue);
|
||||
}
|
||||
|
||||
/*******************************************************************************
|
||||
* Function Name : GetCNTR.
|
||||
* Description : returns the CNTR register value.
|
||||
* Input : None.
|
||||
* Output : None.
|
||||
* Return : CNTR register Value.
|
||||
*******************************************************************************/
|
||||
uint16_t GetCNTR(void)
|
||||
{
|
||||
return(_GetCNTR());
|
||||
}
|
||||
|
||||
/*******************************************************************************
|
||||
* Function Name : SetISTR.
|
||||
* Description : Set the ISTR register value.
|
||||
* Input : wRegValue: new register value.
|
||||
* Output : None.
|
||||
* Return : None.
|
||||
*******************************************************************************/
|
||||
void SetISTR(uint16_t wRegValue)
|
||||
{
|
||||
_SetISTR(wRegValue);
|
||||
}
|
||||
|
||||
/*******************************************************************************
|
||||
* Function Name : GetISTR
|
||||
* Description : Returns the ISTR register value.
|
||||
* Input : None.
|
||||
* Output : None.
|
||||
* Return : ISTR register Value
|
||||
*******************************************************************************/
|
||||
uint16_t GetISTR(void)
|
||||
{
|
||||
return(_GetISTR());
|
||||
}
|
||||
|
||||
/*******************************************************************************
|
||||
* Function Name : GetFNR
|
||||
* Description : Returns the FNR register value.
|
||||
* Input : None.
|
||||
* Output : None.
|
||||
* Return : FNR register Value
|
||||
*******************************************************************************/
|
||||
uint16_t GetFNR(void)
|
||||
{
|
||||
return(_GetFNR());
|
||||
}
|
||||
|
||||
/*******************************************************************************
|
||||
* Function Name : SetDADDR
|
||||
* Description : Set the DADDR register value.
|
||||
* Input : wRegValue: new register value.
|
||||
* Output : None.
|
||||
* Return : None.
|
||||
*******************************************************************************/
|
||||
void SetDADDR(uint16_t wRegValue)
|
||||
{
|
||||
_SetDADDR(wRegValue);
|
||||
}
|
||||
|
||||
/*******************************************************************************
|
||||
* Function Name : GetDADDR
|
||||
* Description : Returns the DADDR register value.
|
||||
* Input : None.
|
||||
* Output : None.
|
||||
* Return : DADDR register Value
|
||||
*******************************************************************************/
|
||||
uint16_t GetDADDR(void)
|
||||
{
|
||||
return(_GetDADDR());
|
||||
}
|
||||
|
||||
/*******************************************************************************
|
||||
* Function Name : SetBTABLE
|
||||
* Description : Set the BTABLE.
|
||||
* Input : wRegValue: New register value.
|
||||
* Output : None.
|
||||
* Return : None.
|
||||
*******************************************************************************/
|
||||
void SetBTABLE(uint16_t wRegValue)
|
||||
{
|
||||
_SetBTABLE(wRegValue);
|
||||
}
|
||||
|
||||
/*******************************************************************************
|
||||
* Function Name : GetBTABLE.
|
||||
* Description : Returns the BTABLE register value.
|
||||
* Input : None.
|
||||
* Output : None.
|
||||
* Return : BTABLE address.
|
||||
*******************************************************************************/
|
||||
uint16_t GetBTABLE(void)
|
||||
{
|
||||
return(_GetBTABLE());
|
||||
}
|
||||
|
||||
/*******************************************************************************
|
||||
* Function Name : SetENDPOINT
|
||||
* Description : Set the Endpoint register value.
|
||||
* Input : bEpNum: Endpoint Number.
|
||||
* wRegValue.
|
||||
* Output : None.
|
||||
* Return : None.
|
||||
*******************************************************************************/
|
||||
void SetENDPOINT(uint8_t bEpNum, uint16_t wRegValue)
|
||||
{
|
||||
_SetENDPOINT(bEpNum, wRegValue);
|
||||
}
|
||||
|
||||
/*******************************************************************************
|
||||
* Function Name : GetENDPOINT
|
||||
* Description : Return the Endpoint register value.
|
||||
* Input : bEpNum: Endpoint Number.
|
||||
* Output : None.
|
||||
* Return : Endpoint register value.
|
||||
*******************************************************************************/
|
||||
uint16_t GetENDPOINT(uint8_t bEpNum)
|
||||
{
|
||||
return(_GetENDPOINT(bEpNum));
|
||||
}
|
||||
|
||||
/*******************************************************************************
|
||||
* Function Name : SetEPType
|
||||
* Description : sets the type in the endpoint register.
|
||||
* Input : bEpNum: Endpoint Number.
|
||||
* wType: type definition.
|
||||
* Output : None.
|
||||
* Return : None.
|
||||
*******************************************************************************/
|
||||
void SetEPType(uint8_t bEpNum, uint16_t wType)
|
||||
{
|
||||
_SetEPType(bEpNum, wType);
|
||||
}
|
||||
|
||||
/*******************************************************************************
|
||||
* Function Name : GetEPType
|
||||
* Description : Returns the endpoint type.
|
||||
* Input : bEpNum: Endpoint Number.
|
||||
* Output : None.
|
||||
* Return : Endpoint Type
|
||||
*******************************************************************************/
|
||||
uint16_t GetEPType(uint8_t bEpNum)
|
||||
{
|
||||
return(_GetEPType(bEpNum));
|
||||
}
|
||||
|
||||
/*******************************************************************************
|
||||
* Function Name : SetEPTxStatus
|
||||
* Description : Set the status of Tx endpoint.
|
||||
* Input : bEpNum: Endpoint Number.
|
||||
* wState: new state.
|
||||
* Output : None.
|
||||
* Return : None.
|
||||
*******************************************************************************/
|
||||
void SetEPTxStatus(uint8_t bEpNum, uint16_t wState)
|
||||
{
|
||||
_SetEPTxStatus(bEpNum, wState);
|
||||
}
|
||||
|
||||
/*******************************************************************************
|
||||
* Function Name : SetEPRxStatus
|
||||
* Description : Set the status of Rx endpoint.
|
||||
* Input : bEpNum: Endpoint Number.
|
||||
* wState: new state.
|
||||
* Output : None.
|
||||
* Return : None.
|
||||
*******************************************************************************/
|
||||
void SetEPRxStatus(uint8_t bEpNum, uint16_t wState)
|
||||
{
|
||||
_SetEPRxStatus(bEpNum, wState);
|
||||
}
|
||||
|
||||
/*******************************************************************************
|
||||
* Function Name : SetDouBleBuffEPStall
|
||||
* Description : sets the status for Double Buffer Endpoint to STALL
|
||||
* Input : bEpNum: Endpoint Number.
|
||||
* bDir: Endpoint direction.
|
||||
* Output : None.
|
||||
* Return : None.
|
||||
*******************************************************************************/
|
||||
void SetDouBleBuffEPStall(uint8_t bEpNum, uint8_t bDir)
|
||||
{
|
||||
uint16_t Endpoint_DTOG_Status;
|
||||
Endpoint_DTOG_Status = GetENDPOINT(bEpNum);
|
||||
if (bDir == EP_DBUF_OUT)
|
||||
{ /* OUT double buffered endpoint */
|
||||
_SetENDPOINT(bEpNum, Endpoint_DTOG_Status & ~EPRX_DTOG1);
|
||||
}
|
||||
else if (bDir == EP_DBUF_IN)
|
||||
{ /* IN double buffered endpoint */
|
||||
_SetENDPOINT(bEpNum, Endpoint_DTOG_Status & ~EPTX_DTOG1);
|
||||
}
|
||||
}
|
||||
|
||||
/*******************************************************************************
|
||||
* Function Name : GetEPTxStatus
|
||||
* Description : Returns the endpoint Tx status.
|
||||
* Input : bEpNum: Endpoint Number.
|
||||
* Output : None.
|
||||
* Return : Endpoint TX Status
|
||||
*******************************************************************************/
|
||||
uint16_t GetEPTxStatus(uint8_t bEpNum)
|
||||
{
|
||||
return(_GetEPTxStatus(bEpNum));
|
||||
}
|
||||
|
||||
/*******************************************************************************
|
||||
* Function Name : GetEPRxStatus
|
||||
* Description : Returns the endpoint Rx status.
|
||||
* Input : bEpNum: Endpoint Number.
|
||||
* Output : None.
|
||||
* Return : Endpoint RX Status
|
||||
*******************************************************************************/
|
||||
uint16_t GetEPRxStatus(uint8_t bEpNum)
|
||||
{
|
||||
return(_GetEPRxStatus(bEpNum));
|
||||
}
|
||||
|
||||
/*******************************************************************************
|
||||
* Function Name : SetEPTxValid
|
||||
* Description : Valid the endpoint Tx Status.
|
||||
* Input : bEpNum: Endpoint Number.
|
||||
* Output : None.
|
||||
* Return : None.
|
||||
*******************************************************************************/
|
||||
void SetEPTxValid(uint8_t bEpNum)
|
||||
{
|
||||
_SetEPTxStatus(bEpNum, EP_TX_VALID);
|
||||
}
|
||||
|
||||
/*******************************************************************************
|
||||
* Function Name : SetEPRxValid
|
||||
* Description : Valid the endpoint Rx Status.
|
||||
* Input : bEpNum: Endpoint Number.
|
||||
* Output : None.
|
||||
* Return : None.
|
||||
*******************************************************************************/
|
||||
void SetEPRxValid(uint8_t bEpNum)
|
||||
{
|
||||
_SetEPRxStatus(bEpNum, EP_RX_VALID);
|
||||
}
|
||||
|
||||
/*******************************************************************************
|
||||
* Function Name : SetEP_KIND
|
||||
* Description : Clear the EP_KIND bit.
|
||||
* Input : bEpNum: Endpoint Number.
|
||||
* Output : None.
|
||||
* Return : None.
|
||||
*******************************************************************************/
|
||||
void SetEP_KIND(uint8_t bEpNum)
|
||||
{
|
||||
_SetEP_KIND(bEpNum);
|
||||
}
|
||||
|
||||
/*******************************************************************************
|
||||
* Function Name : ClearEP_KIND
|
||||
* Description : set the EP_KIND bit.
|
||||
* Input : bEpNum: Endpoint Number.
|
||||
* Output : None.
|
||||
* Return : None.
|
||||
*******************************************************************************/
|
||||
void ClearEP_KIND(uint8_t bEpNum)
|
||||
{
|
||||
_ClearEP_KIND(bEpNum);
|
||||
}
|
||||
/*******************************************************************************
|
||||
* Function Name : Clear_Status_Out
|
||||
* Description : Clear the Status Out of the related Endpoint
|
||||
* Input : bEpNum: Endpoint Number.
|
||||
* Output : None.
|
||||
* Return : None.
|
||||
*******************************************************************************/
|
||||
void Clear_Status_Out(uint8_t bEpNum)
|
||||
{
|
||||
_ClearEP_KIND(bEpNum);
|
||||
}
|
||||
/*******************************************************************************
|
||||
* Function Name : Set_Status_Out
|
||||
* Description : Set the Status Out of the related Endpoint
|
||||
* Input : bEpNum: Endpoint Number.
|
||||
* Output : None.
|
||||
* Return : None.
|
||||
*******************************************************************************/
|
||||
void Set_Status_Out(uint8_t bEpNum)
|
||||
{
|
||||
_SetEP_KIND(bEpNum);
|
||||
}
|
||||
/*******************************************************************************
|
||||
* Function Name : SetEPDoubleBuff
|
||||
* Description : Enable the double buffer feature for the endpoint.
|
||||
* Input : bEpNum: Endpoint Number.
|
||||
* Output : None.
|
||||
* Return : None.
|
||||
*******************************************************************************/
|
||||
void SetEPDoubleBuff(uint8_t bEpNum)
|
||||
{
|
||||
_SetEP_KIND(bEpNum);
|
||||
}
|
||||
/*******************************************************************************
|
||||
* Function Name : ClearEPDoubleBuff
|
||||
* Description : Disable the double buffer feature for the endpoint.
|
||||
* Input : bEpNum: Endpoint Number.
|
||||
* Output : None.
|
||||
* Return : None.
|
||||
*******************************************************************************/
|
||||
void ClearEPDoubleBuff(uint8_t bEpNum)
|
||||
{
|
||||
_ClearEP_KIND(bEpNum);
|
||||
}
|
||||
/*******************************************************************************
|
||||
* Function Name : GetTxStallStatus
|
||||
* Description : Returns the Stall status of the Tx endpoint.
|
||||
* Input : bEpNum: Endpoint Number.
|
||||
* Output : None.
|
||||
* Return : Tx Stall status.
|
||||
*******************************************************************************/
|
||||
uint16_t GetTxStallStatus(uint8_t bEpNum)
|
||||
{
|
||||
return(_GetTxStallStatus(bEpNum));
|
||||
}
|
||||
/*******************************************************************************
|
||||
* Function Name : GetRxStallStatus
|
||||
* Description : Returns the Stall status of the Rx endpoint.
|
||||
* Input : bEpNum: Endpoint Number.
|
||||
* Output : None.
|
||||
* Return : Rx Stall status.
|
||||
*******************************************************************************/
|
||||
uint16_t GetRxStallStatus(uint8_t bEpNum)
|
||||
{
|
||||
return(_GetRxStallStatus(bEpNum));
|
||||
}
|
||||
/*******************************************************************************
|
||||
* Function Name : ClearEP_CTR_RX
|
||||
* Description : Clear the CTR_RX bit.
|
||||
* Input : bEpNum: Endpoint Number.
|
||||
* Output : None.
|
||||
* Return : None.
|
||||
*******************************************************************************/
|
||||
void ClearEP_CTR_RX(uint8_t bEpNum)
|
||||
{
|
||||
_ClearEP_CTR_RX(bEpNum);
|
||||
}
|
||||
/*******************************************************************************
|
||||
* Function Name : ClearEP_CTR_TX
|
||||
* Description : Clear the CTR_TX bit.
|
||||
* Input : bEpNum: Endpoint Number.
|
||||
* Output : None.
|
||||
* Return : None.
|
||||
*******************************************************************************/
|
||||
void ClearEP_CTR_TX(uint8_t bEpNum)
|
||||
{
|
||||
_ClearEP_CTR_TX(bEpNum);
|
||||
}
|
||||
/*******************************************************************************
|
||||
* Function Name : ToggleDTOG_RX
|
||||
* Description : Toggle the DTOG_RX bit.
|
||||
* Input : bEpNum: Endpoint Number.
|
||||
* Output : None.
|
||||
* Return : None.
|
||||
*******************************************************************************/
|
||||
void ToggleDTOG_RX(uint8_t bEpNum)
|
||||
{
|
||||
_ToggleDTOG_RX(bEpNum);
|
||||
}
|
||||
/*******************************************************************************
|
||||
* Function Name : ToggleDTOG_TX
|
||||
* Description : Toggle the DTOG_TX bit.
|
||||
* Input : bEpNum: Endpoint Number.
|
||||
* Output : None.
|
||||
* Return : None.
|
||||
*******************************************************************************/
|
||||
void ToggleDTOG_TX(uint8_t bEpNum)
|
||||
{
|
||||
_ToggleDTOG_TX(bEpNum);
|
||||
}
|
||||
/*******************************************************************************
|
||||
* Function Name : ClearDTOG_RX.
|
||||
* Description : Clear the DTOG_RX bit.
|
||||
* Input : bEpNum: Endpoint Number.
|
||||
* Output : None.
|
||||
* Return : None.
|
||||
*******************************************************************************/
|
||||
void ClearDTOG_RX(uint8_t bEpNum)
|
||||
{
|
||||
_ClearDTOG_RX(bEpNum);
|
||||
}
|
||||
/*******************************************************************************
|
||||
* Function Name : ClearDTOG_TX.
|
||||
* Description : Clear the DTOG_TX bit.
|
||||
* Input : bEpNum: Endpoint Number.
|
||||
* Output : None.
|
||||
* Return : None.
|
||||
*******************************************************************************/
|
||||
void ClearDTOG_TX(uint8_t bEpNum)
|
||||
{
|
||||
_ClearDTOG_TX(bEpNum);
|
||||
}
|
||||
/*******************************************************************************
|
||||
* Function Name : SetEPAddress
|
||||
* Description : Set the endpoint address.
|
||||
* Input : bEpNum: Endpoint Number.
|
||||
* bAddr: New endpoint address.
|
||||
* Output : None.
|
||||
* Return : None.
|
||||
*******************************************************************************/
|
||||
void SetEPAddress(uint8_t bEpNum, uint8_t bAddr)
|
||||
{
|
||||
_SetEPAddress(bEpNum, bAddr);
|
||||
}
|
||||
/*******************************************************************************
|
||||
* Function Name : GetEPAddress
|
||||
* Description : Get the endpoint address.
|
||||
* Input : bEpNum: Endpoint Number.
|
||||
* Output : None.
|
||||
* Return : Endpoint address.
|
||||
*******************************************************************************/
|
||||
uint8_t GetEPAddress(uint8_t bEpNum)
|
||||
{
|
||||
return(_GetEPAddress(bEpNum));
|
||||
}
|
||||
/*******************************************************************************
|
||||
* Function Name : SetEPTxAddr
|
||||
* Description : Set the endpoint Tx buffer address.
|
||||
* Input : bEpNum: Endpoint Number.
|
||||
* wAddr: new address.
|
||||
* Output : None.
|
||||
* Return : None.
|
||||
*******************************************************************************/
|
||||
void SetEPTxAddr(uint8_t bEpNum, uint16_t wAddr)
|
||||
{
|
||||
_SetEPTxAddr(bEpNum, wAddr);
|
||||
}
|
||||
/*******************************************************************************
|
||||
* Function Name : SetEPRxAddr
|
||||
* Description : Set the endpoint Rx buffer address.
|
||||
* Input : bEpNum: Endpoint Number.
|
||||
* wAddr: new address.
|
||||
* Output : None.
|
||||
* Return : None.
|
||||
*******************************************************************************/
|
||||
void SetEPRxAddr(uint8_t bEpNum, uint16_t wAddr)
|
||||
{
|
||||
_SetEPRxAddr(bEpNum, wAddr);
|
||||
}
|
||||
/*******************************************************************************
|
||||
* Function Name : GetEPTxAddr
|
||||
* Description : Returns the endpoint Tx buffer address.
|
||||
* Input : bEpNum: Endpoint Number.
|
||||
* Output : None.
|
||||
* Return : Rx buffer address.
|
||||
*******************************************************************************/
|
||||
uint16_t GetEPTxAddr(uint8_t bEpNum)
|
||||
{
|
||||
return(_GetEPTxAddr(bEpNum));
|
||||
}
|
||||
/*******************************************************************************
|
||||
* Function Name : GetEPRxAddr.
|
||||
* Description : Returns the endpoint Rx buffer address.
|
||||
* Input : bEpNum: Endpoint Number.
|
||||
* Output : None.
|
||||
* Return : Rx buffer address.
|
||||
*******************************************************************************/
|
||||
uint16_t GetEPRxAddr(uint8_t bEpNum)
|
||||
{
|
||||
return(_GetEPRxAddr(bEpNum));
|
||||
}
|
||||
/*******************************************************************************
|
||||
* Function Name : SetEPTxCount.
|
||||
* Description : Set the Tx count.
|
||||
* Input : bEpNum: Endpoint Number.
|
||||
* wCount: new count value.
|
||||
* Output : None.
|
||||
* Return : None.
|
||||
*******************************************************************************/
|
||||
void SetEPTxCount(uint8_t bEpNum, uint16_t wCount)
|
||||
{
|
||||
_SetEPTxCount(bEpNum, wCount);
|
||||
}
|
||||
/*******************************************************************************
|
||||
* Function Name : SetEPCountRxReg.
|
||||
* Description : Set the Count Rx Register value.
|
||||
* Input : *pdwReg: point to the register.
|
||||
* wCount: the new register value.
|
||||
* Output : None.
|
||||
* Return : None.
|
||||
*******************************************************************************/
|
||||
void SetEPCountRxReg(uint32_t *pdwReg, uint16_t wCount)
|
||||
{
|
||||
_SetEPCountRxReg(dwReg, wCount);
|
||||
}
|
||||
/*******************************************************************************
|
||||
* Function Name : SetEPRxCount
|
||||
* Description : Set the Rx count.
|
||||
* Input : bEpNum: Endpoint Number.
|
||||
* wCount: the new count value.
|
||||
* Output : None.
|
||||
* Return : None.
|
||||
*******************************************************************************/
|
||||
void SetEPRxCount(uint8_t bEpNum, uint16_t wCount)
|
||||
{
|
||||
_SetEPRxCount(bEpNum, wCount);
|
||||
}
|
||||
/*******************************************************************************
|
||||
* Function Name : GetEPTxCount
|
||||
* Description : Get the Tx count.
|
||||
* Input : bEpNum: Endpoint Number.
|
||||
* Output : None
|
||||
* Return : Tx count value.
|
||||
*******************************************************************************/
|
||||
uint16_t GetEPTxCount(uint8_t bEpNum)
|
||||
{
|
||||
return(_GetEPTxCount(bEpNum));
|
||||
}
|
||||
/*******************************************************************************
|
||||
* Function Name : GetEPRxCount
|
||||
* Description : Get the Rx count.
|
||||
* Input : bEpNum: Endpoint Number.
|
||||
* Output : None.
|
||||
* Return : Rx count value.
|
||||
*******************************************************************************/
|
||||
uint16_t GetEPRxCount(uint8_t bEpNum)
|
||||
{
|
||||
return(_GetEPRxCount(bEpNum));
|
||||
}
|
||||
/*******************************************************************************
|
||||
* Function Name : SetEPDblBuffAddr
|
||||
* Description : Set the addresses of the buffer 0 and 1.
|
||||
* Input : bEpNum: Endpoint Number.
|
||||
* wBuf0Addr: new address of buffer 0.
|
||||
* wBuf1Addr: new address of buffer 1.
|
||||
* Output : None.
|
||||
* Return : None.
|
||||
*******************************************************************************/
|
||||
void SetEPDblBuffAddr(uint8_t bEpNum, uint16_t wBuf0Addr, uint16_t wBuf1Addr)
|
||||
{
|
||||
_SetEPDblBuffAddr(bEpNum, wBuf0Addr, wBuf1Addr);
|
||||
}
|
||||
/*******************************************************************************
|
||||
* Function Name : SetEPDblBuf0Addr
|
||||
* Description : Set the Buffer 1 address.
|
||||
* Input : bEpNum: Endpoint Number
|
||||
* wBuf0Addr: new address.
|
||||
* Output : None.
|
||||
* Return : None.
|
||||
*******************************************************************************/
|
||||
void SetEPDblBuf0Addr(uint8_t bEpNum, uint16_t wBuf0Addr)
|
||||
{
|
||||
_SetEPDblBuf0Addr(bEpNum, wBuf0Addr);
|
||||
}
|
||||
/*******************************************************************************
|
||||
* Function Name : SetEPDblBuf1Addr
|
||||
* Description : Set the Buffer 1 address.
|
||||
* Input : bEpNum: Endpoint Number
|
||||
* wBuf1Addr: new address.
|
||||
* Output : None.
|
||||
* Return : None.
|
||||
*******************************************************************************/
|
||||
void SetEPDblBuf1Addr(uint8_t bEpNum, uint16_t wBuf1Addr)
|
||||
{
|
||||
_SetEPDblBuf1Addr(bEpNum, wBuf1Addr);
|
||||
}
|
||||
/*******************************************************************************
|
||||
* Function Name : GetEPDblBuf0Addr
|
||||
* Description : Returns the address of the Buffer 0.
|
||||
* Input : bEpNum: Endpoint Number.
|
||||
* Output : None.
|
||||
* Return : None.
|
||||
*******************************************************************************/
|
||||
uint16_t GetEPDblBuf0Addr(uint8_t bEpNum)
|
||||
{
|
||||
return(_GetEPDblBuf0Addr(bEpNum));
|
||||
}
|
||||
/*******************************************************************************
|
||||
* Function Name : GetEPDblBuf1Addr
|
||||
* Description : Returns the address of the Buffer 1.
|
||||
* Input : bEpNum: Endpoint Number.
|
||||
* Output : None.
|
||||
* Return : Address of the Buffer 1.
|
||||
*******************************************************************************/
|
||||
uint16_t GetEPDblBuf1Addr(uint8_t bEpNum)
|
||||
{
|
||||
return(_GetEPDblBuf1Addr(bEpNum));
|
||||
}
|
||||
/*******************************************************************************
|
||||
* Function Name : SetEPDblBuffCount
|
||||
* Description : Set the number of bytes for a double Buffer
|
||||
* endpoint.
|
||||
* Input : bEpNum,bDir, wCount
|
||||
* Output : None.
|
||||
* Return : None.
|
||||
*******************************************************************************/
|
||||
void SetEPDblBuffCount(uint8_t bEpNum, uint8_t bDir, uint16_t wCount)
|
||||
{
|
||||
_SetEPDblBuffCount(bEpNum, bDir, wCount);
|
||||
}
|
||||
/*******************************************************************************
|
||||
* Function Name : SetEPDblBuf0Count
|
||||
* Description : Set the number of bytes in the buffer 0 of a double Buffer
|
||||
* endpoint.
|
||||
* Input : bEpNum, bDir, wCount
|
||||
* Output : None.
|
||||
* Return : None.
|
||||
*******************************************************************************/
|
||||
void SetEPDblBuf0Count(uint8_t bEpNum, uint8_t bDir, uint16_t wCount)
|
||||
{
|
||||
_SetEPDblBuf0Count(bEpNum, bDir, wCount);
|
||||
}
|
||||
/*******************************************************************************
|
||||
* Function Name : SetEPDblBuf1Count
|
||||
* Description : Set the number of bytes in the buffer 0 of a double Buffer
|
||||
* endpoint.
|
||||
* Input : bEpNum, bDir, wCount
|
||||
* Output : None.
|
||||
* Return : None.
|
||||
*******************************************************************************/
|
||||
void SetEPDblBuf1Count(uint8_t bEpNum, uint8_t bDir, uint16_t wCount)
|
||||
{
|
||||
_SetEPDblBuf1Count(bEpNum, bDir, wCount);
|
||||
}
|
||||
/*******************************************************************************
|
||||
* Function Name : GetEPDblBuf0Count
|
||||
* Description : Returns the number of byte received in the buffer 0 of a double
|
||||
* Buffer endpoint.
|
||||
* Input : bEpNum: Endpoint Number.
|
||||
* Output : None.
|
||||
* Return : Endpoint Buffer 0 count
|
||||
*******************************************************************************/
|
||||
uint16_t GetEPDblBuf0Count(uint8_t bEpNum)
|
||||
{
|
||||
return(_GetEPDblBuf0Count(bEpNum));
|
||||
}
|
||||
/*******************************************************************************
|
||||
* Function Name : GetEPDblBuf1Count
|
||||
* Description : Returns the number of data received in the buffer 1 of a double
|
||||
* Buffer endpoint.
|
||||
* Input : bEpNum: Endpoint Number.
|
||||
* Output : None.
|
||||
* Return : Endpoint Buffer 1 count.
|
||||
*******************************************************************************/
|
||||
uint16_t GetEPDblBuf1Count(uint8_t bEpNum)
|
||||
{
|
||||
return(_GetEPDblBuf1Count(bEpNum));
|
||||
}
|
||||
/*******************************************************************************
|
||||
* Function Name : GetEPDblBufDir
|
||||
* Description : gets direction of the double buffered endpoint
|
||||
* Input : bEpNum: Endpoint Number.
|
||||
* Output : None.
|
||||
* Return : EP_DBUF_OUT, EP_DBUF_IN,
|
||||
* EP_DBUF_ERR if the endpoint counter not yet programmed.
|
||||
*******************************************************************************/
|
||||
EP_DBUF_DIR GetEPDblBufDir(uint8_t bEpNum)
|
||||
{
|
||||
if ((uint16_t)(*_pEPRxCount(bEpNum) & 0xFC00) != 0)
|
||||
return(EP_DBUF_OUT);
|
||||
else if (((uint16_t)(*_pEPTxCount(bEpNum)) & 0x03FF) != 0)
|
||||
return(EP_DBUF_IN);
|
||||
else
|
||||
return(EP_DBUF_ERR);
|
||||
}
|
||||
/*******************************************************************************
|
||||
* Function Name : FreeUserBuffer
|
||||
* Description : free buffer used from the application realizing it to the line
|
||||
toggles bit SW_BUF in the double buffered endpoint register
|
||||
* Input : bEpNum, bDir
|
||||
* Output : None.
|
||||
* Return : None.
|
||||
*******************************************************************************/
|
||||
void FreeUserBuffer(uint8_t bEpNum, uint8_t bDir)
|
||||
{
|
||||
if (bDir == EP_DBUF_OUT)
|
||||
{ /* OUT double buffered endpoint */
|
||||
_ToggleDTOG_TX(bEpNum);
|
||||
}
|
||||
else if (bDir == EP_DBUF_IN)
|
||||
{ /* IN double buffered endpoint */
|
||||
_ToggleDTOG_RX(bEpNum);
|
||||
}
|
||||
}
|
||||
|
||||
/*******************************************************************************
|
||||
* Function Name : ToWord
|
||||
* Description : merge two byte in a word.
|
||||
* Input : bh: byte high, bl: bytes low.
|
||||
* Output : None.
|
||||
* Return : resulted word.
|
||||
*******************************************************************************/
|
||||
uint16_t ToWord(uint8_t bh, uint8_t bl)
|
||||
{
|
||||
uint16_t wRet;
|
||||
wRet = (uint16_t)bl | ((uint16_t)bh << 8);
|
||||
return(wRet);
|
||||
}
|
||||
/*******************************************************************************
|
||||
* Function Name : ByteSwap
|
||||
* Description : Swap two byte in a word.
|
||||
* Input : wSwW: word to Swap.
|
||||
* Output : None.
|
||||
* Return : resulted word.
|
||||
*******************************************************************************/
|
||||
uint16_t ByteSwap(uint16_t wSwW)
|
||||
{
|
||||
uint8_t bTemp;
|
||||
uint16_t wRet;
|
||||
bTemp = (uint8_t)(wSwW & 0xff);
|
||||
wRet = (wSwW >> 8) | ((uint16_t)bTemp << 8);
|
||||
return(wRet);
|
||||
}
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
@@ -1,103 +0,0 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file usb_sil.c
|
||||
* @author MCD Application Team
|
||||
* @version V4.0.0
|
||||
* @date 28-August-2012
|
||||
* @brief Simplified Interface Layer for Global Initialization and Endpoint
|
||||
* Rea/Write operations.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© COPYRIGHT 2012 STMicroelectronics</center></h2>
|
||||
*
|
||||
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
|
||||
* You may not use this file except in compliance with the License.
|
||||
* You may obtain a copy of the License at:
|
||||
*
|
||||
* http://www.st.com/software_license_agreement_liberty_v2
|
||||
*
|
||||
* Unless required by applicable law or agreed to in writing, software
|
||||
* distributed under the License is distributed on an "AS IS" BASIS,
|
||||
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
* See the License for the specific language governing permissions and
|
||||
* limitations under the License.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "usb_lib.h"
|
||||
|
||||
/* Private typedef -----------------------------------------------------------*/
|
||||
/* Private define ------------------------------------------------------------*/
|
||||
/* Private macro -------------------------------------------------------------*/
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
/* Extern variables ----------------------------------------------------------*/
|
||||
/* Private function prototypes -----------------------------------------------*/
|
||||
/* Private functions ---------------------------------------------------------*/
|
||||
|
||||
/*******************************************************************************
|
||||
* Function Name : USB_SIL_Init
|
||||
* Description : Initialize the USB Device IP and the Endpoint 0.
|
||||
* Input : None.
|
||||
* Output : None.
|
||||
* Return : Status.
|
||||
*******************************************************************************/
|
||||
uint32_t USB_SIL_Init(void)
|
||||
{
|
||||
/* USB interrupts initialization */
|
||||
/* clear pending interrupts */
|
||||
_SetISTR(0);
|
||||
wInterrupt_Mask = IMR_MSK;
|
||||
/* set interrupts mask */
|
||||
_SetCNTR(wInterrupt_Mask);
|
||||
return 0;
|
||||
}
|
||||
|
||||
/*******************************************************************************
|
||||
* Function Name : USB_SIL_Write
|
||||
* Description : Write a buffer of data to a selected endpoint.
|
||||
* Input : - bEpAddr: The address of the non control endpoint.
|
||||
* - pBufferPointer: The pointer to the buffer of data to be written
|
||||
* to the endpoint.
|
||||
* - wBufferSize: Number of data to be written (in bytes).
|
||||
* Output : None.
|
||||
* Return : Status.
|
||||
*******************************************************************************/
|
||||
uint32_t USB_SIL_Write(uint8_t bEpAddr, uint8_t* pBufferPointer, uint32_t wBufferSize)
|
||||
{
|
||||
/* Use the memory interface function to write to the selected endpoint */
|
||||
UserToPMABufferCopy(pBufferPointer, GetEPTxAddr(bEpAddr & 0x7F), wBufferSize);
|
||||
|
||||
/* Update the data length in the control register */
|
||||
SetEPTxCount((bEpAddr & 0x7F), wBufferSize);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
/*******************************************************************************
|
||||
* Function Name : USB_SIL_Read
|
||||
* Description : Write a buffer of data to a selected endpoint.
|
||||
* Input : - bEpAddr: The address of the non control endpoint.
|
||||
* - pBufferPointer: The pointer to which will be saved the
|
||||
* received data buffer.
|
||||
* Output : None.
|
||||
* Return : Number of received data (in Bytes).
|
||||
*******************************************************************************/
|
||||
uint32_t USB_SIL_Read(uint8_t bEpAddr, uint8_t* pBufferPointer)
|
||||
{
|
||||
uint32_t DataLength = 0;
|
||||
|
||||
/* Get the number of received data on the selected Endpoint */
|
||||
DataLength = GetEPRxCount(bEpAddr & 0x7F);
|
||||
|
||||
/* Use the memory interface function to write to the selected endpoint */
|
||||
PMAToUserBufferCopy(pBufferPointer, GetEPRxAddr(bEpAddr & 0x7F), DataLength);
|
||||
|
||||
/* Return the number of received data */
|
||||
return DataLength;
|
||||
}
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
18
workspace/ts100/inc/Analog.h
Normal file
18
workspace/ts100/inc/Analog.h
Normal file
@@ -0,0 +1,18 @@
|
||||
/*
|
||||
* Analog.h
|
||||
*
|
||||
* Created on: 20 Sep 2016
|
||||
* Author: ralim
|
||||
*/
|
||||
|
||||
#ifndef ANALOG_H_
|
||||
#define ANALOG_H_
|
||||
#include "stm32f10x.h"
|
||||
#include "S100V0_1.h"
|
||||
#include "Bios.h"
|
||||
#include "Interrupt.h"
|
||||
extern volatile uint16_t ADC1ConvertedValue[2];
|
||||
|
||||
uint16_t Get_ADC1Value(uint8_t i);
|
||||
uint16_t readIronTemp(uint16_t calibration,uint8_t read);
|
||||
#endif /* ANALOG_H_ */
|
||||
@@ -1,59 +1,37 @@
|
||||
/********************* (C) COPYRIGHT 2015 e-Design Co.,Ltd. ********************
|
||||
File Name : Bios.h
|
||||
Version : S100 APP Ver 2.11
|
||||
Description:
|
||||
Author : bure & Celery
|
||||
Data: 2015/08/03
|
||||
History:
|
||||
2015/08/03 ͳһ<CDB3><D2BB><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
|
||||
*******************************************************************************/
|
||||
|
||||
/*
|
||||
* Setup functions for the basic hardware present in the system
|
||||
*/
|
||||
#ifndef __BIOS_H
|
||||
#define __BIOS_H
|
||||
|
||||
#include "stm32f10x.h"
|
||||
#include "S100V0_1.h"
|
||||
extern volatile u32 gTime[];
|
||||
#include "S100V0_1.h"/*For pin definitions*/
|
||||
#include "Analog.h"/*So that we can attach the DMA to the output array*/
|
||||
|
||||
#define USB_DN_OUT() GPIOA->CRH = (GPIOA->CRH & 0xFFFF3FFF) | 0x00003000
|
||||
#define USB_DP_OUT() GPIOA->CRH = (GPIOA->CRH & 0xFFF3FFFF) | 0x00030000
|
||||
|
||||
#define USB_DN_EN() GPIOA->CRH = (GPIOA->CRH & 0xFFFFBFFF) | 0x0000B000
|
||||
#define USB_DP_EN() GPIOA->CRH = (GPIOA->CRH & 0xFFFBFFFF) | 0x000B0000
|
||||
|
||||
#define USB_DP_PD() GPIOA->CRH = (GPIOA->CRH & 0xFFF3FFFF) | 0x00030000
|
||||
|
||||
#define USB_DN_HIGH() GPIOA->BSRR = GPIO_Pin_11
|
||||
#define USB_DP_HIGH() GPIOA->BSRR = GPIO_Pin_12
|
||||
|
||||
#define USB_DN_LOW() GPIOA->BRR = GPIO_Pin_11
|
||||
#define USB_DP_LOW() GPIOA->BRR = GPIO_Pin_12
|
||||
|
||||
#define LOW 0
|
||||
#define HIGH 1
|
||||
|
||||
#define BLINK 1 // Bit0 : 0/1 <20><>ʾ/<2F><>˸״̬<D7B4><CCAC>־
|
||||
#define WAIT_TIMES 100000
|
||||
|
||||
|
||||
#define SECTOR_SIZE 512
|
||||
#define SECTOR_CNT 4096
|
||||
#define HEAT_T 200
|
||||
extern volatile uint32_t gHeat_cnt;
|
||||
|
||||
inline void setIronTimer(uint32_t time) {
|
||||
gHeat_cnt = time;
|
||||
}
|
||||
inline uint32_t getIronTimer() {
|
||||
return gHeat_cnt;
|
||||
}
|
||||
/*Get set the remaining toggles of the heater output*/
|
||||
u32 Get_HeatingTime(void);
|
||||
void Set_HeatingTime(u32 heating_time);
|
||||
u16 Get_AdcValue(u8 i);
|
||||
|
||||
void Init_Gtime(void);
|
||||
void Delay_Ms(u32 ms);
|
||||
void Delay_HalfMs(u32 ms);
|
||||
void USB_Port(u8 state);
|
||||
void NVIC_Config(u16 tab_offset);
|
||||
void RCC_Config(void);
|
||||
void GPIO_Config(void);
|
||||
void Adc_Init(void);
|
||||
void Init_Timer2(void);
|
||||
void Init_Timer3(void);
|
||||
void TIM2_ISR(void);
|
||||
/*Interrupts*/
|
||||
void TIM3_ISR(void);
|
||||
void Init_EXTI(void);
|
||||
/*Watchdog*/
|
||||
void Start_Watchdog(uint32_t ms);
|
||||
void Clear_Watchdog(void);
|
||||
#endif
|
||||
/********************************* END OF FILE ********************************/
|
||||
|
||||
@@ -1,70 +0,0 @@
|
||||
/********************* (C) COPYRIGHT 2015 e-Design Co.,Ltd. **********************
|
||||
File Name : CTRL.h
|
||||
Version : S100 APP Ver 2.11
|
||||
Description:
|
||||
Author : Celery
|
||||
Data: 2015/07/07
|
||||
History:
|
||||
2015/07/07 ͳһ<CDB3><D2BB><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
|
||||
*******************************************************************************/
|
||||
#ifndef _CTRL_H
|
||||
#define _CTRL_H
|
||||
|
||||
#include "stm32f10x.h"
|
||||
#include "Bios.h"
|
||||
|
||||
#define TEMPSHOW_TIMER gTime[0]/*TEMPSHOW_TIMER*/
|
||||
#define HEATING_TIMER gTime[1]/*HEATING_TIMER*/
|
||||
#define ENTER_WAIT_TIMER gTime[2]/*ENTER_WAIT_TIMER*/
|
||||
#define EFFECTIVE_KEY_TIMER gTime[3]/*EFFECTIVE_KEY_TIMER*/
|
||||
#define LEAVE_WAIT_TIMER gTime[4]/*LEAVE_WAIT_TIMER*/
|
||||
#define G6_TIMER gTime[5]/*SWITCH_SHOW_TIMER*/
|
||||
#define UI_TIMER gTime[6]/*UI_TIMER ͼ<><CDBC><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ʱ<EFBFBD><CAB1><EFBFBD><EFBFBD><EFBFBD>*/
|
||||
#define KD_TIMER gTime[7]/*<2A><><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ʱ*/
|
||||
|
||||
///^^-- All the times in gTime are decremented by 1 if >0 by timer2 tick <bottom of bios.c>
|
||||
//------------------------------ <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>------------------------------------//
|
||||
#define KEY_ST(KEY_PIN) GPIO_ReadInputDataBit(GPIOA, KEY_PIN)
|
||||
#define NO_KEY 0x0 /*NO Keys pressed*/
|
||||
#define KEY_V1 0x0100/*V1 key pressed*/
|
||||
#define KEY_V2 0x0040/*V2 Key pressed*/
|
||||
#define KEY_CN 0X8000/*(Long key press i think)*/
|
||||
#define KEY_V3 (KEY_V1|KEY_V2)/*Both Keys pressed*/
|
||||
|
||||
typedef enum WORK_STATUS {
|
||||
IDLE = 1, //System is idle
|
||||
THERMOMETER, //Thermometer mode, basically reads sensor and shows temp
|
||||
TEMP_CTR, //Soldering Mode (Temp Controlled)
|
||||
WAIT, //System in wait state
|
||||
TEMP_SET, //Setting the soldering temp
|
||||
CONFIG, //system config mode
|
||||
MODE_CNG, //DFU mode i think??
|
||||
ALARM, //An alarm has been fired
|
||||
} WORK_STATUS;
|
||||
|
||||
typedef enum WARNING_STATUS {
|
||||
NORMAL_TEMP = 1, HIGH_TEMP, SEN_ERR, HIGH_VOLTAGE, LOW_VOLTAGE,
|
||||
} WARNING_STATUS;
|
||||
|
||||
typedef struct {
|
||||
u8 ver[16];
|
||||
s16 t_standby; // 200<30><30>C=1800 2520,<2C><><EFBFBD><EFBFBD><EFBFBD>¶<EFBFBD>
|
||||
s16 t_work; // 350<35><30>C=3362, <20><><EFBFBD><EFBFBD><EFBFBD>¶<EFBFBD>
|
||||
s16 t_step; //<2F><><EFBFBD>ò<EFBFBD><C3B2><EFBFBD>
|
||||
u32 wait_time; //3*60*100 3 mintute
|
||||
u32 idle_time; //6*60*100 6 minute
|
||||
} DEVICE_INFO_SYS;
|
||||
|
||||
extern DEVICE_INFO_SYS device_info;
|
||||
void Set_PrevTemp(s16 Temp);
|
||||
u8 Get_CtrlStatus(void);
|
||||
void Set_CtrlStatus(u8 status);
|
||||
s16 Get_TempVal(void);
|
||||
u16 Get_HtFlag(void);
|
||||
void System_Init(void);
|
||||
void Pid_Init(void);
|
||||
u16 Pid_Realize(s16 temp);
|
||||
u32 Heating_Time(s16 temp, s16 wk_temp);
|
||||
void Status_Tran(void);
|
||||
#endif
|
||||
/******************************** END OF FILE *********************************/
|
||||
@@ -1,95 +0,0 @@
|
||||
/********************* (C) COPYRIGHT 2015 e-Design Co.,Ltd. **********************
|
||||
File Name : Disk.h
|
||||
Version : S100 APP Ver 2.11
|
||||
Description:
|
||||
Author : Celery
|
||||
Data: 2015/08/03
|
||||
History:
|
||||
2016/09/13 : Ben V. Brown - english comments
|
||||
2015/08/03 :
|
||||
*******************************************************************************/
|
||||
#ifndef __DISK_H
|
||||
#define __DISK_H
|
||||
|
||||
#include "stm32f10x_flash.h"
|
||||
#include "usb_scsi.h"
|
||||
#include "usb_regs.h"
|
||||
#include "usb_conf.h"
|
||||
#include "usb_bot.h"
|
||||
#include "usb_mem.h"
|
||||
#include "usb_lib.h"
|
||||
#include "usb_pwr.h"
|
||||
|
||||
#define SECTOR_SIZE 512
|
||||
#define SECTOR_CNT 4096
|
||||
|
||||
#define FAT1_SECTOR &gDisk_buff[0x000]
|
||||
#define FAT2_SECTOR &gDisk_buff[0x200]
|
||||
#define ROOT_SECTOR &gDisk_buff[0x400]
|
||||
#define VOLUME_BASE &gDisk_buff[0x416]
|
||||
#define OTHER_FILES &gDisk_buff[0x420]
|
||||
#define FILE_SECTOR &gDisk_buff[0x600]
|
||||
#define Root (u8*)ROOT_SECTOR
|
||||
|
||||
//#define APP_BASE 0x0800C000
|
||||
|
||||
#define HEX 0
|
||||
#define BIN 2
|
||||
#define SET 1
|
||||
|
||||
#define RDY 0
|
||||
#define NOT 2
|
||||
#define END 3
|
||||
#define ERR 4
|
||||
|
||||
#define DATA_SEG 0x00
|
||||
#define DATA_END 0x01
|
||||
#define EXT_ADDR 0x04
|
||||
|
||||
#define TXFR_IDLE 0
|
||||
#define TXFR_ONGOING 1
|
||||
|
||||
//#define FAT_DATA 0x00FFFFF8
|
||||
#define VOLUME 0x40DD8D18 //0x3E645C29
|
||||
|
||||
#define BUFF 0 //
|
||||
|
||||
#define V32_BASE SECTOR_SIZE // V32 8*4=32
|
||||
#define W_ADDR 0
|
||||
#define ADDR 1
|
||||
#define H_ADDR 2
|
||||
#define OFFSET 3
|
||||
#define SEC_CNT 4
|
||||
#define COUNT 5
|
||||
#define RD_CNT 6
|
||||
#define WR_CNT 7
|
||||
|
||||
#define VAR_BASE V32_BASE + 32 // VAR 9+17=26
|
||||
#define USB_ST 0
|
||||
#define SEG_KIND 1
|
||||
#define SEG_LEN 2
|
||||
#define SEG_SUM 3
|
||||
#define SEG_TMP 4
|
||||
#define SEG_ST 5
|
||||
#define DATA_CNT 6
|
||||
#define F_TYPE 7
|
||||
#define F_FLAG 8
|
||||
#define SEG_DATA 9 //9~26
|
||||
|
||||
u8 Cal_Val(u8 str[], u8 k, u8 flag);
|
||||
void Disk_BuffInit(void);
|
||||
u8 ReWrite_All(void);
|
||||
u8 Config_Analysis(void);
|
||||
void Disk_BuffInit(void);
|
||||
void Disk_SecWrite(u8* pbuffer, u32 disk_addr);
|
||||
void Close_File(void);
|
||||
void Write_Memory(u32 w_offset, u32 w_length);
|
||||
void Read_Memory(u32 r_offset, u32 r_length);
|
||||
void Set_Ver(u8 str[], u8 i);
|
||||
void Erase(void);
|
||||
char * Get_Line(char *dst, char *src, int n, int m);
|
||||
void Upper(u8* str, u16 len);
|
||||
u8* SearchFile(u8* pfilename, u16* pfilelen, u16* root_addr);
|
||||
u8 ReWriteFlsash(void);
|
||||
#endif
|
||||
/********************************* END OF FILE ******************************/
|
||||
@@ -1,53 +0,0 @@
|
||||
/********************* (C) COPYRIGHT 2015 e-Design Co.,Ltd. ********************
|
||||
File Name : EXT_Flash.h
|
||||
Version : S100 APP Ver 2.11
|
||||
Description:
|
||||
Author : bure
|
||||
Data:
|
||||
History:
|
||||
*******************************************************************************/
|
||||
|
||||
#ifndef __EXT_FLASH_H
|
||||
#define __EXT_FLASH_H
|
||||
//#include "stm32f10x_lib.h"
|
||||
#include "stm32f10x.h"
|
||||
|
||||
extern u8 flash_mode;
|
||||
#define FLASH_2M 1
|
||||
#define FLASH_8M 2
|
||||
//#define W25Q64BV
|
||||
|
||||
#define WREN 0x06 // Write enable instruction
|
||||
#define READ 0x03 // Read from Memory instruction
|
||||
#define RDSR 0x05 // Read Status Register instruction
|
||||
#define PP 0x02 // Write to Memory instruction
|
||||
#define PE 0xDB // Page Erase instruction
|
||||
#define PW 0x0A // Page write instruction
|
||||
#define DP 0xB9 // Deep power-down instruction
|
||||
#define RDP 0xAB // Release from deep power-down instruction
|
||||
//----W25Q64BV----------------------------------------------------------------//
|
||||
#define CHIPE 0xC7 // Chip All Erase instruction
|
||||
#define BE64 0xD8 // Block 32k Erase instruction
|
||||
#define BE32 0x52 // Block 64k Erase instruction
|
||||
#define SE 0x20 // Sector 4K Erase instruction
|
||||
#define Dummy_Byte 0xA5
|
||||
#define EXT_FLASH_PageSize 256
|
||||
|
||||
//----------------------------------------------------------------------------//
|
||||
#define WIP_Flag 0x01 // Write In Progress (WIP) flag
|
||||
|
||||
|
||||
#define ExtFlash_CS_LOW() GPIO_ResetBits(GPIOB, GPIO_Pin_7)
|
||||
#define ExtFlash_CS_HIGH() GPIO_SetBits(GPIOB, GPIO_Pin_7)
|
||||
|
||||
void ExtFlash_PageWR(u8* pBuffer, u32 WriteAddr);
|
||||
void ExtFlash_PageRD(u8* pBuffer, u32 ReadAddr, u16 Lenght);
|
||||
void MAL_GetStatus (void);
|
||||
u8 ExtFlash_ReadByte(void);
|
||||
u8 ExtFlash_SendByte(u8 byte);
|
||||
void ExtFlash_WriteEnable(void);
|
||||
void ExtFlash_WaitForWriteEnd(void);
|
||||
void ExtFlash_PageProg(u8* pBuffer, u32 WriteAddr,u8 CMD);
|
||||
#endif
|
||||
|
||||
/********************************* END OF FILE ******************************/
|
||||
@@ -1,29 +0,0 @@
|
||||
/********************* (C) COPYRIGHT 2015 e-Design Co.,Ltd. ********************
|
||||
File Name : FAT12.h
|
||||
Version : S100 APP Ver 2.11
|
||||
Description:
|
||||
Author : bure
|
||||
Data:
|
||||
History:
|
||||
*******************************************************************************/
|
||||
#ifndef __FAT12_H
|
||||
#define __FAT12_H
|
||||
|
||||
#include "stm32f10x.h"
|
||||
|
||||
|
||||
u8 ReadFileSec(u8* Buffer, u16* Cluster);
|
||||
u8 ReadDiskData(u8* pBuffer, u32 ReadAddr, u16 Lenght);
|
||||
u8 NextCluster(u16* Cluster);
|
||||
u8 ProgFileSec(u8* Buffer, u16* Cluster);
|
||||
u8 ProgDiskPage(u8* Buffer, u32 ProgAddr);
|
||||
u8 SeekBlank(u8* Buffer, u16* Cluster);
|
||||
u8 SetCluster(u8* Buffer, u16* Cluster);
|
||||
u8 OpenFileRd(u8* Buffer, u8* FileName, u16* Cluster, u32* pDirAddr);
|
||||
u8 OpenFileWr(u8* Buffer, u8* FileName, u16* Cluster, u32* pDirAddr);
|
||||
u8 CloseFile(u8* Buffer, u32 Lenght, u16* Cluster, u32* pDirAddr);
|
||||
u8 FAT_SearchFile(u8* pBuffer, u8* pFileName, u16* pCluster, u32* pDirAddr,u32* flag);
|
||||
void ExtFlash_PageWrite(u8* pBuffer, u32 WriteAddr, u8 Mode);
|
||||
|
||||
#endif
|
||||
/********************************* END OF FILE ********************************/
|
||||
@@ -1,29 +0,0 @@
|
||||
/********************* (C) COPYRIGHT 2015 e-Design Co.,Ltd. ********************
|
||||
File Name : Flash.h
|
||||
Version : Author : bure
|
||||
*******************************************************************************/
|
||||
#ifndef __EXT_FLASH_H
|
||||
#define __EXT_FLASH_H
|
||||
#include "stm32f10x.h"
|
||||
#define PAGESIZE 256
|
||||
|
||||
#define WREN 0x06 // Write enable instruction
|
||||
#define READ 0x03 // Read from Memory instruction
|
||||
#define RDSR 0x05 // Read Status Register instruction
|
||||
#define PP 0x02 // Write to Memory instruction
|
||||
#define PW 0x0A // Page write instruction
|
||||
|
||||
#define OK 0 //
|
||||
#define SEC_ERR 1 //
|
||||
#define TMAX 100000 //
|
||||
|
||||
#define WIP_Flag 0x01 // Write In Progress (WIP) flag
|
||||
#define Dummy_Byte 0xA5
|
||||
|
||||
u8 FLASH_Prog(u32 Address, u16 Data);
|
||||
void FLASH_Erase(u32 Address);
|
||||
void ExtFlashPageWR(u8* pBuffer, u32 WriteAddr);
|
||||
void ExtFlashDataRD(u8* pBuffer, u32 ReadAddr, u16 Lenght);
|
||||
#endif
|
||||
|
||||
/********************************* END OF FILE ******************************/
|
||||
90
workspace/ts100/inc/Font.h
Normal file
90
workspace/ts100/inc/Font.h
Normal file
@@ -0,0 +1,90 @@
|
||||
/*
|
||||
* Font.h
|
||||
*
|
||||
* Created on: 17 Sep 2016
|
||||
* Author: Ralim
|
||||
*/
|
||||
|
||||
#ifndef FONT_H_
|
||||
#define FONT_H_
|
||||
|
||||
const u8 FONT[]={
|
||||
0x00,0xF0,0xFC,0x0E,0x82,0xC2,0x62,0x1E,0xFC,0xF0,0x00,0x00,0x00,0x00,
|
||||
0x00,0x03,0x0F,0x1F,0x11,0x10,0x10,0x1C,0x0F,0x03,0x00,0x00,0x00,0x00,/*0*/
|
||||
0x00,0x08,0x04,0x02,0xFE,0xFE,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
|
||||
0x00,0x10,0x10,0x10,0x1F,0x1F,0x10,0x10,0x10,0x00,0x00,0x00,0x00,0x00,/*1*/
|
||||
0x00,0x04,0x02,0x02,0x02,0xC6,0xFC,0x78,0x00,0x00,0x00,0x00,0x00,0x00,
|
||||
0x00,0x18,0x1C,0x16,0x13,0x11,0x10,0x10,0x10,0x00,0x00,0x00,0x00,0x00,/*2*/
|
||||
0x00,0x02,0x02,0x42,0x42,0x66,0xFE,0x9C,0x00,0x00,0x00,0x00,0x00,0x00,
|
||||
0x00,0x10,0x10,0x10,0x10,0x10,0x08,0x0F,0x07,0x00,0x00,0x00,0x00,0x00,/*3*/
|
||||
0x00,0x00,0x80,0xE0,0x30,0x1C,0x06,0xFE,0xFE,0x00,0x00,0x00,0x00,0x00,
|
||||
0x00,0x03,0x03,0x02,0x02,0x02,0x02,0x1F,0x1F,0x02,0x02,0x00,0x00,0x00,/*4*/
|
||||
0x00,0x7E,0x7E,0x42,0x42,0x42,0xC2,0x82,0x00,0x00,0x00,0x00,0x00,0x00,
|
||||
0x00,0x10,0x10,0x10,0x10,0x10,0x08,0x0F,0x07,0x00,0x00,0x00,0x00,0x00,/*5*/
|
||||
0x00,0xE0,0xF8,0x8C,0x44,0x42,0x42,0xC2,0x82,0x80,0x00,0x00,0x00,0x00,
|
||||
0x00,0x07,0x0F,0x18,0x10,0x10,0x10,0x18,0x0F,0x07,0x00,0x00,0x00,0x00,/*6*/
|
||||
0x00,0x02,0x02,0x02,0x02,0xC2,0xF2,0x1E,0x06,0x00,0x00,0x00,0x00,0x00,
|
||||
0x00,0x00,0x10,0x1C,0x0F,0x03,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,/*7*/
|
||||
0x00,0x38,0x7C,0x66,0xC2,0x82,0xC2,0x66,0x7C,0x3C,0x00,0x00,0x00,0x00,
|
||||
0x00,0x0E,0x0F,0x19,0x10,0x10,0x10,0x19,0x0F,0x0E,0x00,0x00,0x00,0x00,/*8*/
|
||||
0x00,0x78,0x7C,0xC6,0x82,0x82,0x82,0x46,0xFC,0xF8,0x00,0x00,0x00,0x00,
|
||||
0x00,0x00,0x10,0x10,0x10,0x10,0x08,0x0C,0x07,0x03,0x00,0x00,0x00,0x00,/*9*/
|
||||
0x00,0x00,0x80,0xF0,0x1E,0x02,0x1E,0xF0,0x80,0x00,0x00,0x00,0x00,0x00,
|
||||
0x00,0x1C,0x0F,0x03,0x02,0x02,0x02,0x03,0x0F,0x1C,0x00,0x00,0x00,0x00,/*A*/
|
||||
0x00,0xFE,0xFE,0x42,0x42,0x42,0xE6,0xBE,0x9C,0x00,0x00,0x00,0x00,0x00,
|
||||
0x00,0x1F,0x1F,0x10,0x10,0x10,0x18,0x0F,0x07,0x00,0x00,0x00,0x00,0x00,/*B*/
|
||||
0x00,0xF0,0xF8,0x0C,0x06,0x02,0x02,0x02,0x04,0x00,0x00,0x00,0x00,0x00,
|
||||
0x00,0x03,0x0F,0x0C,0x18,0x10,0x10,0x10,0x08,0x00,0x00,0x00,0x00,0x00,/*C*/
|
||||
0x00,0xFE,0xFE,0x02,0x02,0x02,0x06,0x0C,0xFC,0xF0,0x00,0x00,0x00,0x00,
|
||||
0x00,0x1F,0x1F,0x10,0x10,0x10,0x18,0x0C,0x07,0x03,0x00,0x00,0x00,0x00,/*D*/
|
||||
0x00,0xFE,0xFE,0x42,0x42,0x42,0x42,0x42,0x00,0x00,0x00,0x00,0x00,0x00,
|
||||
0x00,0x1F,0x1F,0x10,0x10,0x10,0x10,0x10,0x00,0x00,0x00,0x00,0x00,0x00,/*E*/
|
||||
0x00,0xFE,0xFE,0x82,0x82,0x82,0x82,0x82,0x00,0x00,0x00,0x00,0x00,0x00,
|
||||
0x00,0x1F,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,/*F*/
|
||||
0x00,0xF0,0xF8,0x0C,0x06,0x02,0x82,0x82,0x82,0x84,0x00,0x00,0x00,0x00,
|
||||
0x00,0x03,0x0F,0x0C,0x18,0x10,0x10,0x10,0x1F,0x1F,0x00,0x00,0x00,0x00,/*G*/
|
||||
0x00,0xFE,0xFE,0x40,0x40,0x40,0x40,0xFE,0xFE,0x00,0x00,0x00,0x00,0x00,
|
||||
0x00,0x1F,0x1F,0x00,0x00,0x00,0x00,0x1F,0x1F,0x00,0x00,0x00,0x00,0x00,/*H*/
|
||||
0x00,0x02,0x02,0x02,0xFE,0xFE,0x02,0x02,0x02,0x00,0x00,0x00,0x00,0x00,
|
||||
0x00,0x10,0x10,0x10,0x1F,0x1F,0x10,0x10,0x10,0x00,0x00,0x00,0x00,0x00,/*I*/
|
||||
0x00,0x02,0x02,0x02,0x02,0x02,0xFE,0xFE,0x00,0x00,0x00,0x00,0x00,0x00,
|
||||
0x00,0x08,0x10,0x10,0x10,0x18,0x0F,0x07,0x00,0x00,0x00,0x00,0x00,0x00,/*J*/
|
||||
0x00,0xFE,0xFE,0xC0,0xE0,0x30,0x18,0x0C,0x06,0x02,0x00,0x00,0x00,0x00,
|
||||
0x00,0x1F,0x1F,0x00,0x01,0x03,0x06,0x0C,0x18,0x10,0x00,0x00,0x00,0x00,/*K*/
|
||||
0x00,0xFE,0xFE,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
|
||||
0x00,0x1F,0x1F,0x10,0x10,0x10,0x10,0x10,0x00,0x00,0x00,0x00,0x00,0x00,/*L*/
|
||||
0x00,0x00,0xFE,0x06,0x3C,0xC0,0xC0,0x3C,0x06,0xFE,0x00,0x00,0x00,0x00,
|
||||
0x00,0x10,0x1F,0x00,0x00,0x01,0x01,0x00,0x00,0x1F,0x18,0x00,0x00,0x00,/*M*/
|
||||
0x00,0xFE,0xFE,0x1E,0x70,0x80,0x00,0xFE,0xFE,0x00,0x00,0x00,0x00,0x00,
|
||||
0x00,0x1F,0x1F,0x00,0x00,0x03,0x1C,0x1F,0x1F,0x00,0x00,0x00,0x00,0x00,/*N*/
|
||||
0x00,0xF0,0xFC,0x0C,0x02,0x02,0x02,0x0E,0xFC,0xF0,0x00,0x00,0x00,0x00,
|
||||
0x00,0x03,0x0F,0x1C,0x10,0x10,0x10,0x0C,0x0F,0x03,0x00,0x00,0x00,0x00,/*O*/
|
||||
0x00,0xFE,0xFE,0x02,0x02,0x02,0x86,0xFC,0x78,0x00,0x00,0x00,0x00,0x00,
|
||||
0x00,0x1F,0x1F,0x01,0x01,0x01,0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00,/*P*/
|
||||
0x00,0xF0,0xF8,0x0C,0x02,0x02,0x02,0x02,0x0C,0xFC,0xF0,0x00,0x00,0x00,
|
||||
0x00,0x03,0x0F,0x1C,0x10,0x30,0x70,0xD8,0x8C,0x8F,0x83,0x40,0x00,0x00,/*Q*/
|
||||
0x00,0xFE,0xFE,0x42,0x42,0xC2,0xE6,0x3C,0x1C,0x00,0x00,0x00,0x00,0x00,
|
||||
0x00,0x1F,0x1F,0x00,0x00,0x00,0x01,0x0F,0x1C,0x10,0x00,0x00,0x00,0x00,/*R*/
|
||||
0x00,0x38,0x7C,0x66,0xC2,0xC2,0x82,0x84,0x00,0x00,0x00,0x00,0x00,0x00,
|
||||
0x00,0x08,0x10,0x10,0x10,0x10,0x19,0x0F,0x07,0x00,0x00,0x00,0x00,0x00,/*S*/
|
||||
0x00,0x02,0x02,0x02,0x02,0xFE,0xFE,0x02,0x02,0x02,0x02,0x00,0x00,0x00,
|
||||
0x00,0x00,0x00,0x00,0x00,0x1F,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,/*T*/
|
||||
0x00,0xFE,0xFE,0x00,0x00,0x00,0x00,0x00,0xFE,0xFE,0x00,0x00,0x00,0x00,
|
||||
0x00,0x07,0x0F,0x18,0x10,0x10,0x10,0x18,0x0F,0x07,0x00,0x00,0x00,0x00,/*U*/
|
||||
0x00,0x0E,0x7E,0xE0,0x00,0x00,0x00,0xE0,0x7C,0x0E,0x00,0x00,0x00,0x00,
|
||||
0x00,0x00,0x00,0x03,0x1F,0x18,0x1F,0x03,0x00,0x00,0x00,0x00,0x00,0x00,/*V*/
|
||||
0x00,0x7E,0xFE,0x00,0x00,0xE0,0xE0,0x00,0x00,0xFE,0x7E,0x00,0x00,0x00,
|
||||
0x00,0x00,0x1F,0x18,0x0F,0x01,0x01,0x0F,0x18,0x1F,0x00,0x00,0x00,0x00,/*W*/
|
||||
0x00,0x02,0x06,0x1C,0x38,0xE0,0xE0,0x38,0x1C,0x06,0x02,0x00,0x00,0x00,
|
||||
0x00,0x10,0x18,0x0E,0x07,0x01,0x01,0x07,0x0E,0x18,0x10,0x00,0x00,0x00,/*X*/
|
||||
0x00,0x02,0x0E,0x3C,0xF0,0xC0,0xC0,0xF0,0x3C,0x0E,0x02,0x00,0x00,0x00,
|
||||
0x00,0x00,0x00,0x00,0x00,0x1F,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,/*Y*/
|
||||
0x00,0x02,0x02,0x02,0xC2,0xE2,0x3A,0x0E,0x02,0x00,0x00,0x00,0x00,0x00,
|
||||
0x00,0x10,0x1C,0x17,0x11,0x10,0x10,0x10,0x10,0x00,0x00,0x00,0x00,0x00,/*Z*/
|
||||
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
|
||||
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,/* */
|
||||
|
||||
|
||||
};
|
||||
|
||||
#endif /* FONT_H_ */
|
||||
@@ -1,49 +0,0 @@
|
||||
/********************* (C) COPYRIGHT 2015 e-Design Co.,Ltd. **********************
|
||||
File Name : CTRL.h
|
||||
Version : S100 APP Ver 2.11
|
||||
Description:
|
||||
Author : Celery
|
||||
Data: 2015/07/07
|
||||
History:
|
||||
2015/07/07 ͳһ<CDB3><D2BB><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
|
||||
*******************************************************************************/
|
||||
#ifndef _HARDWARE_H
|
||||
#define _HARDWARE_H
|
||||
|
||||
#include "stm32f10x.h"
|
||||
|
||||
#define SI_COE 8//56
|
||||
#define SI_THRESHOLD 60
|
||||
|
||||
typedef enum VOL_CLASS {
|
||||
H_ALARM = 0,
|
||||
VOL_24,
|
||||
VOL_19,
|
||||
VOL_12,
|
||||
VOL_5,
|
||||
L_ALARM,
|
||||
} VOL_CLASS;
|
||||
|
||||
extern s32 gZerop_ad;
|
||||
extern u8 gCalib_flag;
|
||||
extern u32 gTurn_offv;
|
||||
|
||||
u32 Get_gKey(void);
|
||||
void Set_gKey(u32 key);
|
||||
void Set_LongKeyFlag(u32 flag);
|
||||
void Zero_Calibration(void);
|
||||
int Read_Vb(u8 flag);
|
||||
void Scan_Key(void);
|
||||
u32 Get_SlAvg(u32 avg_data);
|
||||
int Get_TempSlAvg(int avg_data);
|
||||
u32 Get_AvgAd(void);
|
||||
int Get_SensorTmp(void);
|
||||
u16 Get_ThermometerTemp(void);
|
||||
s16 Get_Temp(s16 wk_temp);
|
||||
void Clear_Watchdog(void);
|
||||
u32 Start_Watchdog(u32 ms);
|
||||
u8 Get_AlarmType(void);
|
||||
void Set_AlarmType(u8 type);
|
||||
u32 Get_CalFlag(void);
|
||||
#endif
|
||||
/******************************** END OF FILE *********************************/
|
||||
@@ -3,67 +3,9 @@
|
||||
/******************************************************************************/
|
||||
#ifndef __INTERRUPT_H
|
||||
#define __INTERRUPT_H
|
||||
#include <stdint.h>
|
||||
//See here for refernce to this block http://embedded.kleier.selfhost.me/vector.php
|
||||
static void forever (void);
|
||||
void __attribute__ ((weak, alias ("forever"))) WWDG_IRQHandler (void);
|
||||
void __attribute__ ((weak, alias ("forever"))) PVD_IRQHandler (void);
|
||||
void __attribute__ ((weak, alias ("forever"))) TAMPER_IRQHandler (void);
|
||||
void __attribute__ ((weak, alias ("forever"))) RTC_IRQHandler (void);
|
||||
void __attribute__ ((weak, alias ("forever"))) FLASH_IRQHandler (void);
|
||||
void __attribute__ ((weak, alias ("forever"))) RCC_IRQHandler (void);
|
||||
void __attribute__ ((weak, alias ("forever"))) EXTI0_IRQHandler (void);
|
||||
void __attribute__ ((weak, alias ("forever"))) EXTI1_IRQHandler (void);
|
||||
void __attribute__ ((weak, alias ("forever"))) EXTI2_IRQHandler (void);
|
||||
void __attribute__ ((weak, alias ("forever"))) EXTI3_IRQHandler (void);
|
||||
void __attribute__ ((weak, alias ("forever"))) EXTI4_IRQHandler (void);
|
||||
void __attribute__ ((weak, alias ("forever"))) DMA1_Channel1_IRQHandler (void);
|
||||
void __attribute__ ((weak, alias ("forever"))) DMA1_Channel2_IRQHandler (void);
|
||||
void __attribute__ ((weak, alias ("forever"))) DMA1_Channel3_IRQHandler (void);
|
||||
void __attribute__ ((weak, alias ("forever"))) DMA1_Channel4_IRQHandler (void);
|
||||
void __attribute__ ((weak, alias ("forever"))) DMA1_Channel5_IRQHandler (void);
|
||||
void __attribute__ ((weak, alias ("forever"))) DMA1_Channel6_IRQHandler (void);
|
||||
void __attribute__ ((weak, alias ("forever"))) DMA1_Channel7_IRQHandler (void);
|
||||
void __attribute__ ((weak, alias ("forever"))) ADC1_2_IRQHandler (void);
|
||||
void __attribute__ ((weak, alias ("forever"))) USB_HP_CAN1_TX_IRQHandler (void);
|
||||
void __attribute__ ((weak, alias ("forever"))) CAN1_RX1_IRQHandler (void);
|
||||
void __attribute__ ((weak, alias ("forever"))) CAN1_SCE_IRQHandler (void);
|
||||
void __attribute__ ((weak, alias ("forever"))) EXTI9_5_IRQHandler (void);
|
||||
void __attribute__ ((weak, alias ("forever"))) TIM1_BRK_IRQHandler (void);
|
||||
void __attribute__ ((weak, alias ("forever"))) TIM1_UP_IRQHandler (void);
|
||||
void __attribute__ ((weak, alias ("forever"))) TIM1_TRG_COM_IRQHandler (void);
|
||||
void __attribute__ ((weak, alias ("forever"))) TIM1_CC_IRQHandler (void);
|
||||
void __attribute__ ((weak, alias ("forever"))) TIM4_IRQHandler (void);
|
||||
void __attribute__ ((weak, alias ("forever"))) I2C1_EV_IRQHandler (void);
|
||||
void __attribute__ ((weak, alias ("forever"))) I2C1_ER_IRQHandler (void);
|
||||
void __attribute__ ((weak, alias ("forever"))) I2C2_EV_IRQHandler (void);
|
||||
void __attribute__ ((weak, alias ("forever"))) I2C2_ER_IRQHandler (void);
|
||||
void __attribute__ ((weak, alias ("forever"))) SPI1_IRQHandler (void);
|
||||
void __attribute__ ((weak, alias ("forever"))) SPI2_IRQHandler (void);
|
||||
void __attribute__ ((weak, alias ("forever"))) USART1_IRQHandler (void);
|
||||
void __attribute__ ((weak, alias ("forever"))) USART2_IRQHandler (void);
|
||||
void __attribute__ ((weak, alias ("forever"))) USART3_IRQHandler (void);
|
||||
void __attribute__ ((weak, alias ("forever"))) EXTI15_10_IRQHandler (void);
|
||||
void __attribute__ ((weak, alias ("forever"))) RTCAlarm_IRQHandler (void);
|
||||
void __attribute__ ((weak, alias ("forever"))) USBWakeUp_IRQHandler (void);
|
||||
void __attribute__ ((weak, alias ("forever"))) TIM8_BRK_IRQHandler (void);
|
||||
void __attribute__ ((weak, alias ("forever"))) TIM8_UP_IRQHandler (void);
|
||||
void __attribute__ ((weak, alias ("forever"))) TIM8_TRG_COM_IRQHandler (void);
|
||||
void __attribute__ ((weak, alias ("forever"))) TIM8_CC_IRQHandler (void);
|
||||
void __attribute__ ((weak, alias ("forever"))) ADC3_IRQHandler (void);
|
||||
void __attribute__ ((weak, alias ("forever"))) FSMC_IRQHandler (void);
|
||||
void __attribute__ ((weak, alias ("forever"))) SDIO_IRQHandler (void);
|
||||
void __attribute__ ((weak, alias ("forever"))) TIM5_IRQHandler (void);
|
||||
void __attribute__ ((weak, alias ("forever"))) SPI3_IRQHandler (void);
|
||||
void __attribute__ ((weak, alias ("forever"))) UART4_IRQHandler (void);
|
||||
void __attribute__ ((weak, alias ("forever"))) UART5_IRQHandler (void);
|
||||
void __attribute__ ((weak, alias ("forever"))) TIM6_IRQHandler (void);
|
||||
void __attribute__ ((weak, alias ("forever"))) TIM7_IRQHandler (void);
|
||||
void __attribute__ ((weak, alias ("forever"))) DMA2_Channel1_IRQHandler (void);
|
||||
void __attribute__ ((weak, alias ("forever"))) DMA2_Channel2_IRQHandler (void);
|
||||
void __attribute__ ((weak, alias ("forever"))) DMA2_Channel3_IRQHandler (void);
|
||||
void __attribute__ ((weak, alias ("forever"))) DMA2_Channel4_5_IRQHandler (void);
|
||||
|
||||
|
||||
/*This loop is used for un assigned IRQ's so that the debugger can catch them*/
|
||||
|
||||
void NMI_Handler(void);
|
||||
void HardFault_Handler(void);
|
||||
@@ -87,7 +29,92 @@ void I2C1_ER_IRQHandler(void);
|
||||
void TIM2_IRQHandler(void);
|
||||
void TIM3_IRQHandler(void);
|
||||
|
||||
extern volatile uint32_t system_Ticks;
|
||||
void delayMs(uint32_t ticks);
|
||||
volatile extern uint32_t lastKeyPress;
|
||||
volatile extern uint32_t lastMovement;
|
||||
|
||||
volatile extern uint16_t keyState;
|
||||
inline uint32_t millis() {
|
||||
return system_Ticks;
|
||||
}
|
||||
|
||||
inline uint32_t getLastButtonPress() {
|
||||
return lastKeyPress;
|
||||
}
|
||||
inline void resetLastButtonPress() {
|
||||
lastKeyPress = millis();
|
||||
|
||||
}
|
||||
inline void resetButtons() {
|
||||
lastKeyPress = millis();
|
||||
keyState = 0;
|
||||
}
|
||||
inline uint32_t getLastMovement() {
|
||||
return lastMovement;
|
||||
}
|
||||
|
||||
inline uint16_t getButtons() {
|
||||
return keyState;
|
||||
}
|
||||
void WWDG_IRQHandler(void);
|
||||
void PVD_IRQHandler(void);
|
||||
|
||||
void TAMPER_IRQHandler(void);
|
||||
void RTC_IRQHandler(void);
|
||||
void FLASH_IRQHandler(void);
|
||||
void RCC_IRQHandler(void);
|
||||
void EXTI0_IRQHandler(void);
|
||||
void EXTI1_IRQHandler(void);
|
||||
void EXTI2_IRQHandler(void);
|
||||
void EXTI3_IRQHandler(void);
|
||||
void EXTI4_IRQHandler(void);
|
||||
void DMA1_Channel1_IRQHandler(void);
|
||||
void DMA1_Channel2_IRQHandler(void);
|
||||
void DMA1_Channel3_IRQHandler(void);
|
||||
void DMA1_Channel4_IRQHandler(void);
|
||||
void DMA1_Channel5_IRQHandler(void);
|
||||
void DMA1_Channel6_IRQHandler(void);
|
||||
void DMA1_Channel7_IRQHandler(void);
|
||||
void ADC1_2_IRQHandler(void);
|
||||
void USB_HP_CAN1_TX_IRQHandler(void);
|
||||
void CAN1_RX1_IRQHandler(void);
|
||||
void CAN1_SCE_IRQHandler(void);
|
||||
void EXTI9_5_IRQHandler(void);
|
||||
void TIM1_BRK_IRQHandler(void);
|
||||
void TIM1_UP_IRQHandler(void);
|
||||
void TIM1_TRG_COM_IRQHandler(void);
|
||||
void TIM1_CC_IRQHandler(void);
|
||||
void TIM4_IRQHandler(void);
|
||||
void I2C1_EV_IRQHandler(void);
|
||||
void I2C1_ER_IRQHandler(void);
|
||||
void I2C2_EV_IRQHandler(void);
|
||||
void I2C2_ER_IRQHandler(void);
|
||||
void SPI1_IRQHandler(void);
|
||||
void SPI2_IRQHandler(void);
|
||||
void USART1_IRQHandler(void);
|
||||
void USART2_IRQHandler(void);
|
||||
void USART3_IRQHandler(void);
|
||||
void EXTI15_10_IRQHandler(void);
|
||||
void RTCAlarm_IRQHandler(void);
|
||||
void USBWakeUp_IRQHandler(void);
|
||||
void TIM8_BRK_IRQHandler(void);
|
||||
void TIM8_UP_IRQHandler(void);
|
||||
void TIM8_TRG_COM_IRQHandler(void);
|
||||
void TIM8_CC_IRQHandler(void);
|
||||
void ADC3_IRQHandler(void);
|
||||
void FSMC_IRQHandler(void);
|
||||
void SDIO_IRQHandler(void);
|
||||
void TIM5_IRQHandler(void);
|
||||
void SPI3_IRQHandler(void);
|
||||
void UART4_IRQHandler(void);
|
||||
void UART5_IRQHandler(void);
|
||||
void TIM6_IRQHandler(void);
|
||||
void TIM7_IRQHandler(void);
|
||||
void DMA2_Channel1_IRQHandler(void);
|
||||
void DMA2_Channel2_IRQHandler(void);
|
||||
void DMA2_Channel3_IRQHandler(void);
|
||||
void DMA2_Channel4_5_IRQHandler(void);
|
||||
|
||||
#endif /* __INTERRUPT_H */
|
||||
|
||||
|
||||
@@ -1,19 +1,90 @@
|
||||
/********************* (C) COPYRIGHT 2015 e-Design Co.,Ltd. **********************
|
||||
File Name : MMA8652FC.h
|
||||
Version : S100 APP Ver 2.11
|
||||
Description:
|
||||
Author : Celery
|
||||
Data: 2015/07/07
|
||||
History:
|
||||
2015/07/07 ͳһ<CDB3><D2BB><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
|
||||
*******************************************************************************/
|
||||
/*
|
||||
* MMA8652FC.*
|
||||
* Files for the built in accelerometer from NXP.
|
||||
* This sets the unit up in motion detection mode with an interrupt on movement
|
||||
* This interrupt is fed to PB5 which catches it via EXTI5
|
||||
*
|
||||
* http://cache.freescale.com/files/sensors/doc/data_sheet/MMA8652FC.pdf
|
||||
*
|
||||
* EXTI Motion config setup values lifted from AN4070from NXP
|
||||
*
|
||||
* Ben V. Brown - <ralim@ralimtek.com>
|
||||
*/
|
||||
#ifndef __MMA8652FC__H
|
||||
#define __MMA8652FC__H
|
||||
|
||||
|
||||
void StartUp_Acceleromter(void);//This is the only function we expose
|
||||
|
||||
//--------------MMA8652 Device ID----------------------------------------------//
|
||||
|
||||
#define DEVICE_ADDR 0X1D
|
||||
//--------------MMA8652 Registers-------------------------------------------//
|
||||
|
||||
#define STATUS_REG 0x00 // STATUS Register
|
||||
|
||||
#define OUT_X_MSB_REG 0x01 // [7:0] are 8 MSBs of the 14-bit X-axis sample
|
||||
#define OUT_X_LSB_REG 0x02 // [7:2] are the 6 LSB of 14-bit X-axis sample
|
||||
#define OUT_Y_MSB_REG 0x03 // [7:0] are 8 MSBs of the 14-bit Y-axis sample
|
||||
#define OUT_Y_LSB_REG 0x04 // [7:2] are the 6 LSB of 14-bit Y-axis sample
|
||||
#define OUT_Z_MSB_REG 0x05 // [7:0] are 8 MSBs of the 14-bit Z-axis sample
|
||||
#define OUT_Z_LSB_REG 0x06 // [7:2] are the 6 LSB of 14-bit Z-axis sample
|
||||
|
||||
#define F_SETUP_REG 0x09 // F_SETUP FIFO Setup Register
|
||||
#define TRIG_CFG_REG 0x0A // TRIG_CFG Map of FIFO data capture events
|
||||
#define SYSMOD_REG 0x0B // SYSMOD System Mode Register
|
||||
#define INT_SOURCE_REG 0x0C // INT_SOURCE System Interrupt Status Register
|
||||
#define WHO_AM_I_REG 0x0D // WHO_AM_I Device ID Register
|
||||
#define XYZ_DATA_CFG_REG 0x0E // XYZ_DATA_CFG Sensor Data Configuration Register
|
||||
#define HP_FILTER_CUTOFF_REG 0x0F // HP_FILTER_CUTOFF High Pass Filter Register
|
||||
|
||||
#define PL_STATUS_REG 0x10 // PL_STATUS Portrait/Landscape Status Register
|
||||
#define PL_CFG_REG 0x11 // PL_CFG Portrait/Landscape Configuration Register
|
||||
#define PL_COUNT_REG 0x12 // PL_COUNT Portrait/Landscape Debounce Register
|
||||
#define PL_BF_ZCOMP_REG 0x13 // PL_BF_ZCOMP Back/Front and Z Compensation Register
|
||||
#define P_L_THS_REG 0x14 // P_L_THS Portrait to Landscape Threshold Register
|
||||
|
||||
#define FF_MT_CFG_REG 0x15 // FF_MT_CFG Freefall and Motion Configuration Register
|
||||
#define FF_MT_SRC_REG 0x16 // FF_MT_SRC Freefall and Motion Source Register
|
||||
#define FF_MT_THS_REG 0x17 // FF_MT_THS Freefall and Motion Threshold Register
|
||||
#define FF_MT_COUNT_REG 0x18 // FF_MT_COUNT Freefall Motion Count Register
|
||||
|
||||
#define TRANSIENT_CFG_REG 0x1D // TRANSIENT_CFG Transient Configuration Register
|
||||
#define TRANSIENT_SRC_REG 0x1E // TRANSIENT_SRC Transient Source Register
|
||||
#define TRANSIENT_THS_REG 0x1F // TRANSIENT_THS Transient Threshold Register
|
||||
#define TRANSIENT_COUNT_REG 0x20 // TRANSIENT_COUNT Transient Debounce Counter Register
|
||||
|
||||
#define PULSE_CFG_REG 0x21 // PULSE_CFG Pulse Configuration Register
|
||||
#define PULSE_SRC_REG 0x22 // PULSE_SRC Pulse Source Register
|
||||
#define PULSE_THSX_REG 0x23 // PULSE_THS XYZ Pulse Threshold Registers
|
||||
#define PULSE_THSY_REG 0x24
|
||||
#define PULSE_THSZ_REG 0x25
|
||||
#define PULSE_TMLT_REG 0x26 // PULSE_TMLT Pulse Time Window Register
|
||||
#define PULSE_LTCY_REG 0x27 // PULSE_LTCY Pulse Latency Timer Register
|
||||
#define PULSE_WIND_REG 0x28 // PULSE_WIND Second Pulse Time Window Register
|
||||
|
||||
#define ASLP_COUNT_REG 0x29 // ASLP_COUNT Auto Sleep Inactivity Timer Register
|
||||
|
||||
#define CTRL_REG1 0x2A // CTRL_REG1 System Control 1 Register
|
||||
#define CTRL_REG2 0x2B // CTRL_REG2 System Control 2 Register
|
||||
#define CTRL_REG3 0x2C // CTRL_REG3 Interrupt Control Register
|
||||
#define CTRL_REG4 0x2D // CTRL_REG4 Interrupt Enable Register
|
||||
#define CTRL_REG5 0x2E // CTRL_REG5 Interrupt Configuration Register
|
||||
|
||||
#define OFF_X_REG 0x2F // XYZ Offset Correction Registers
|
||||
#define OFF_Y_REG 0x30
|
||||
#define OFF_Z_REG 0x31
|
||||
|
||||
//MMA8652FC 7-bit I2C address
|
||||
|
||||
#define MMA8652FC_I2C_ADDRESS 0x1D // MMA865xFC 7-bit I2C address is fixed
|
||||
|
||||
//MMA8652FC Sensitivity
|
||||
|
||||
#define SENSITIVITY_2G 1024
|
||||
#define SENSITIVITY_4G 512
|
||||
#define SENSITIVITY_8G 256
|
||||
|
||||
#define STATUS_REG 0x00
|
||||
#define X_MSB_REG 0X01
|
||||
#define X_LSB_REG 0X02
|
||||
@@ -27,15 +98,8 @@ History:
|
||||
#define INT_SOURCE 0X0C
|
||||
#define DEVICE_ID 0X0D
|
||||
|
||||
#define XYZ_DATA_CFG_REG 0X0E
|
||||
|
||||
|
||||
#define CTRL_REG1 0X2A //
|
||||
#define CTRL_REG2 0X2B //System Control 2 register
|
||||
#define CTRL_REG3 0X2C //
|
||||
#define CTRL_REG4 0X2D //Interrupt Enable register
|
||||
#define CTRL_REG5 0X2E //
|
||||
|
||||
//-----STATUS_REG(0X00)-----Bit Define----------------------------------------//
|
||||
#define ZYXDR_BIT 0X08
|
||||
//----XYZ_DATA_CFG_REG(0xE)-Bit Define----------------------------------------//
|
||||
@@ -54,7 +118,7 @@ History:
|
||||
#define FHZ2 0x5 //12.5hz
|
||||
#define FHZ1 0x6 //6.25hz
|
||||
#define FHZ0 0x7 //1.563hz
|
||||
#define DataRateValue FHZ100
|
||||
|
||||
//---------CTRL_REG2(0X2B)Bit Define------------------------------------------//
|
||||
#define MODS_MASK 0x03 //Oversampling Mode 4
|
||||
#define Normal_Mode 0x0 //Normal=0,Low Noise Low Power MODS=1,
|
||||
@@ -70,16 +134,5 @@ History:
|
||||
#define INT_EN_FF_MT 1<<2 //Freefall/Motion Interrupt Enable
|
||||
#define INT_EN_DRDY 1<<0 //Data Ready Interrupt Enable
|
||||
|
||||
u16 Get_MmaShift(void);
|
||||
void Set_MmaShift(u16 shift);
|
||||
u16 Get_MmaActive(void);
|
||||
void MMA865x_Standby(void);
|
||||
void MMA865x_Active(void);
|
||||
u16 Cheak_XYData(u16 x0,u16 y0,u16 x1,u16 y1);
|
||||
u16 Update_X(void);
|
||||
u16 Update_Y(void);
|
||||
u16 Update_Z(void);
|
||||
void Check_Accelerated(void);
|
||||
void StartUp_Accelerated(void);
|
||||
#endif
|
||||
/******************************** END OF FILE *********************************/
|
||||
|
||||
37
workspace/ts100/inc/Modes.h
Normal file
37
workspace/ts100/inc/Modes.h
Normal file
@@ -0,0 +1,37 @@
|
||||
/*
|
||||
* Modes.h
|
||||
*
|
||||
* Created on: 17 Sep 2016
|
||||
* Author: Ralim
|
||||
*/
|
||||
|
||||
#ifndef MODES_H_
|
||||
#define MODES_H_
|
||||
#include "Interrupt.h"
|
||||
#include "S100V0_1.h"
|
||||
#include "Oled.h"
|
||||
#include "PID.h"
|
||||
enum {
|
||||
STARTUP, //we are sitting on the prompt to push a button
|
||||
SOLDERING,
|
||||
TEMP_ADJ,
|
||||
SETTINGS,
|
||||
SLEEP,
|
||||
} operatingMode;
|
||||
|
||||
enum {
|
||||
UVLO = 0, SLEEP_TEMP, SLEEP_TIME,
|
||||
|
||||
} settingsPage;
|
||||
|
||||
struct {
|
||||
uint32_t SolderingTemp; //current setpoint for the iron
|
||||
uint8_t SleepTime; //minutes to sleep
|
||||
uint32_t SleepTemp; //temp to drop to in sleep
|
||||
uint8_t cutoutVoltage; //X10 the voltage we cutout at for undervoltage
|
||||
uint8_t movementEnabled;
|
||||
} systemSettings;
|
||||
|
||||
void ProcessUI();
|
||||
void DrawUI();
|
||||
#endif /* MODES_H_ */
|
||||
@@ -1,33 +1,39 @@
|
||||
/********************* (C) COPYRIGHT 2015 e-Design Co.,Ltd. **********************
|
||||
File Name : Oled.h
|
||||
Version : S100 APP Ver 2.11
|
||||
Description:
|
||||
Author : Celery
|
||||
Data: 2015/07/07
|
||||
History:
|
||||
2015/07/07 ͳһ<CDB3><D2BB><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
|
||||
*******************************************************************************/
|
||||
File Name : Oled.h
|
||||
Version : S100 APP Ver 2.11
|
||||
Description:
|
||||
Author : Celery
|
||||
Data: 2015/07/07
|
||||
History:
|
||||
2015/07/07 ͳһ<CDB3><D2BB><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
|
||||
*******************************************************************************/
|
||||
#ifndef _OLED_SSD1306_H
|
||||
#define _OLED_SSD1306_H
|
||||
|
||||
#define DEVICEADDR_OLED 0x3c
|
||||
#include "stm32f10x.h"
|
||||
#include "Interrupt.h"
|
||||
void Sc_Pt(u8 Co);
|
||||
void Oled_DisplayOn(void);
|
||||
void Oled_DisplayOff(void);
|
||||
u8* Oled_DrawArea(u8 x0,u8 y0,u8 wide, u8 high,u8* ptr);
|
||||
void Set_ShowPos(u8 x,u8 y);
|
||||
u8* Oled_DrawArea(u8 x0, u8 y0, u8 wide, u8 high, u8* ptr);
|
||||
void Set_ShowPos(u8 x, u8 y);
|
||||
|
||||
u8* Show_posi(u8 posi,u8* ptr,u8 word_width);
|
||||
void Clean_Char(int k,u8 wide);
|
||||
u8* Show_posi(u8 posi, u8* ptr, u8 word_width);
|
||||
void Clean_Char(int k, u8 wide);
|
||||
void Write_Command(u8 Data);
|
||||
void Write_Data(u8 Data);
|
||||
void GPIO_Init_OLED(void);
|
||||
void Init_Oled(void);
|
||||
u8* Data_Command(u8 len,u8* ptr);
|
||||
void Reg_Command(u8 posi,u8 flag);
|
||||
u8* Data_Command(u8 len, u8* ptr);
|
||||
void Reg_Command(u8 posi, u8 flag);
|
||||
void Clear_Screen(void);
|
||||
void Write_InitCommand_data(u32 Com_len,u8* data);
|
||||
void Display_BG(void);
|
||||
void Write_InitCommand_data(u32 Com_len, u8* data);
|
||||
void Display_BG(void);
|
||||
void OLED_DrawString(char* string, uint8_t length);
|
||||
void OLED_DrawChar(char c, uint8_t x);
|
||||
void OLED_DrawTwoNumber(uint8_t in, uint8_t x);
|
||||
void OLED_DrawThreeNumber(uint16_t in, uint8_t x);
|
||||
|
||||
#endif
|
||||
/******************************** END OF FILE *********************************/
|
||||
|
||||
18
workspace/ts100/inc/PID.h
Normal file
18
workspace/ts100/inc/PID.h
Normal file
@@ -0,0 +1,18 @@
|
||||
/*
|
||||
* PID.h
|
||||
*
|
||||
* Created on: 20 Sep 2016
|
||||
* Author: ralim
|
||||
*/
|
||||
|
||||
#ifndef PID_H_
|
||||
#define PID_H_
|
||||
#include "Analog.h"
|
||||
#include "Interrupt.h"
|
||||
struct {
|
||||
uint32_t kp, ki, kd; //PID values
|
||||
} pidSettings;
|
||||
|
||||
int32_t computePID(uint16_t setpoint);
|
||||
void setupPID(void);
|
||||
#endif /* PID_H_ */
|
||||
@@ -6,22 +6,21 @@
|
||||
|
||||
#define PRODUCT_INFO "TS100"
|
||||
#define MCU_TYPE "STM32F103T8"
|
||||
#define ADC_TYPE "MCU's ADC"
|
||||
#define FPGA_TYPE "None"
|
||||
#define SCH_VER "2.46"
|
||||
// #define SSD1316 1
|
||||
// #define MFTSEEED "Manufacturer"
|
||||
// #define MFTMINI "Manufacturer"
|
||||
|
||||
#define SPIx SPI1
|
||||
#define FLASH_PAGE 0x0400
|
||||
//--------------------------- key Definitions ------------------------------//
|
||||
#define KEY1_PIN GPIO_Pin_9 //PA8
|
||||
#define KEY2_PIN GPIO_Pin_6 //PA6
|
||||
|
||||
#define KEY_A KEY1_PIN
|
||||
#define KEY_B KEY2_PIN
|
||||
#define BUT_A 0x01
|
||||
#define BUT_B 0x02
|
||||
#define BUT_AB BUT_A|BUT_B
|
||||
#define KEY_1 !(GPIOA->IDR & KEY1_PIN)
|
||||
#define KEY_2 !(GPIOA->IDR & KEY2_PIN)
|
||||
#define KEY_DFU KEY_1
|
||||
#define KEY_ON 0
|
||||
|
||||
#define I2C1_DMA_CHANNEL_TX DMA1_Channel6
|
||||
#define I2C1_DMA_CHANNEL_RX DMA1_Channel7
|
||||
@@ -32,27 +31,23 @@
|
||||
#define I2C1_DR_Address 0x40005410
|
||||
#define I2C2_DR_Address 0x40005810
|
||||
|
||||
#define SERIAL_NO1 (*(u32*)0x1FFFF7E8)
|
||||
#define SERIAL_NO2 (*(u32*)0x1FFFF7EC)
|
||||
#define SERIAL_NO3 (*(u32*)0x1FFFF7F0)
|
||||
|
||||
//--------------------------- OLED <20><>ؿ<EFBFBD><D8BF><EFBFBD><EFBFBD>ź<EFBFBD> ------------------------------//
|
||||
//--------------------------- OLED ------------------------------//
|
||||
#define OLED_RST_PIN GPIO_Pin_8 //PA9
|
||||
#define OLED_RST() GPIO_ResetBits(GPIOA, OLED_RST_PIN)
|
||||
#define OLED_ACT() GPIO_SetBits (GPIOA, OLED_RST_PIN)
|
||||
|
||||
//------------------------------ <EFBFBD><EFBFBD><EFBFBD>ȿ<EFBFBD><EFBFBD><EFBFBD><EFBFBD>ź<EFBFBD> --------------------------------//
|
||||
#define HEAT_PIN GPIO_Pin_4 //PA15(JTDI)
|
||||
//------------------------------ --------------------------------//
|
||||
#define HEAT_PIN GPIO_Pin_4
|
||||
|
||||
#define HEAT_OFF() GPIOB->BRR = HEAT_PIN//GPIO_ResetBits(GPIOB, HEAT_PIN)
|
||||
#define HEAT_ON() GPIOB->BSRR = HEAT_PIN//GPIO_SetBits (GPIOB, HEAT_PIN)
|
||||
#define HEAT_OFF() GPIOB->BRR = HEAT_PIN
|
||||
#define HEAT_ON() GPIOB->BSRR = HEAT_PIN
|
||||
|
||||
//---------------------<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ѹ<EFBFBD><EFBFBD><EFBFBD>--VB---------------------------------------//
|
||||
//-----------------------VB---------------------------------------//
|
||||
#define VB_PIN GPIO_Pin_1 //PB1(Ai9)
|
||||
//----------------------------ADX345 INT1,INT2--------------------------------//
|
||||
#define INT1_PIN GPIO_Pin_5 //PB5
|
||||
#define INT2_PIN GPIO_Pin_3 //PB3
|
||||
//------------------------------ GPIO <EFBFBD>˿<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> -------------------------------//
|
||||
//------------------------------ GPIO -------------------------------//
|
||||
|
||||
#define GPIOA_OUTPUT() GPIOA->ODR = 0xFFFF;
|
||||
#define GPIOA_L_DEF() GPIOA->CRL = 0x08888888; /* Ai7 K2 xxx xxx xxx xxx xxx xxx */
|
||||
@@ -62,7 +57,7 @@
|
||||
#define GPIOB_L_DEF() GPIOB->CRL = 0x44838800; /* SDA SCL It1 Po It2 xxx Ai9 Ai8 */
|
||||
#define GPIOB_H_DEF() GPIOB->CRH = 0x88888888; /* xxx xxx xxx xxx xxx xxx xxx xxx */
|
||||
|
||||
//--------------------------------- RCC <EFBFBD><EFBFBD><EFBFBD><EFBFBD> ---------------------------------//
|
||||
//--------------------------------- RCC Clock Config ---------------------------------//
|
||||
|
||||
#define RCC_PLL_EN() RCC->CR |= 0x01000000;// PLL En
|
||||
|
||||
|
||||
@@ -1,46 +0,0 @@
|
||||
/********************* (C) COPYRIGHT 2015 e-Design Co.,Ltd. **********************
|
||||
File Name : UI.h
|
||||
Version : S100 APP Ver 2.11
|
||||
Description:
|
||||
Author : Celery
|
||||
Data: 2015/07/07
|
||||
History:
|
||||
2015/07/07 ͳһ<CDB3><D2BB><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
|
||||
*******************************************************************************/
|
||||
#ifndef _UI_H
|
||||
#define _UI_H
|
||||
|
||||
#include "stm32f10x.h"
|
||||
|
||||
u32 Get_UpdataFlag(void);
|
||||
void Set_UpdataFlag(u32 Cont);
|
||||
void APP_Init(void);
|
||||
u32 Calculation_TWork(u8 Flag);
|
||||
void Temp_SetProc(void);
|
||||
void Display_Temp(u8 x, s16 Temp);
|
||||
void Show_Notice(void);
|
||||
void Show_Warning(void);
|
||||
void Show_MiniTS(void);
|
||||
void Show_TempDown(s16 Temp, s16 Dst_Temp);
|
||||
void Set_TemperatureShowFlag(u8 flag);
|
||||
s16 TemperatureShow_Change(u8 flag, s16 Tmp);
|
||||
u8 Get_TemperatureShowFlag(void);
|
||||
|
||||
void Show_Triangle(u8 empty, u8 fill);
|
||||
void Shift_Char(u8* ptr, u8 pos);
|
||||
void Show_Set(void);
|
||||
void Show_OrderChar(u8* ptr, u8 num, u8 width);
|
||||
u8 Reverse_Bin8(u8 data);
|
||||
void Show_ReverseChar(u8* ptr, u8 num, u8 width, u8 direction);
|
||||
u8 Show_TempReverse(u8 num, u8 width, u8 direction);
|
||||
void Show_HeatingIcon(u32 ht_flag, u16 active);
|
||||
void Display_Str(u8 x, char* str);
|
||||
void Display_Str10(u8 x, char* str);
|
||||
void Clear_Pervious(u16 data);
|
||||
void Print_Integer(s32 data, u8 posi);
|
||||
u8 Roll_Num(u16 Step, u8 Flag);
|
||||
void OLed_Display(void);
|
||||
void Show_Cal(u8 flag);
|
||||
void Show_Config(void);
|
||||
#endif
|
||||
/******************************** END OF FILE *********************************/
|
||||
@@ -1,404 +0,0 @@
|
||||
#ifndef _WORDLIB_H
|
||||
#define _WORDLIB_H
|
||||
|
||||
const u8 wordlib[] = { //16*16 <20><><EFBFBD><EFBFBD>ʽ<EFBFBD><CABD><EFBFBD><EFBFBD><EFBFBD>룬<EFBFBD><EBA3AC><EFBFBD><EFBFBD>
|
||||
0x00,0x00,0x00,0xF8,0xFE,0x03,0x01,0x01,0x01,0x03,0xFE,0xFC,0xF0,0x00,0x00,0x00,
|
||||
0x00,0x00,0x00,0x3F,0x7F,0xE0,0x80,0x80,0x80,0xC0,0x7F,0x3F,0x07,0x00,0x00,0x00,/*"0",0*/
|
||||
0x00,0x00,0x00,0x08,0x04,0x04,0x06,0xFF,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
|
||||
0x00,0x00,0x00,0x00,0x80,0x80,0x80,0xFF,0xFF,0x80,0x80,0x80,0x00,0x00,0x00,0x00,/*"1",1*/
|
||||
0x00,0x00,0x00,0x06,0x07,0x01,0x01,0x01,0x81,0xC3,0x7F,0x3E,0x00,0x00,0x00,0x00,
|
||||
0x00,0x00,0x00,0xE0,0xF0,0xD8,0xCC,0xC6,0xC3,0xC0,0xC0,0xE0,0x00,0x00,0x00,0x00,/*"2",2*/
|
||||
0x00,0x00,0x00,0x06,0x07,0x81,0x81,0x81,0xC1,0x63,0x3F,0x1E,0x00,0x00,0x00,0x00,
|
||||
0x00,0x00,0x00,0xE0,0xC0,0x80,0x80,0x81,0x81,0xC3,0x7F,0x3E,0x00,0x00,0x00,0x00,/*"3",3*/
|
||||
0x00,0x00,0x00,0x00,0xC0,0x60,0x38,0x0C,0xFF,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,
|
||||
0x00,0x00,0x06,0x07,0x05,0x04,0x04,0x84,0xFF,0xFF,0xC4,0x84,0x06,0x00,0x00,0x00,/*"4",4*/
|
||||
0x00,0x00,0x00,0xFF,0xFF,0x83,0x83,0x83,0x83,0x83,0x83,0x03,0x00,0x00,0x00,0x00,
|
||||
0x00,0x00,0x00,0xE0,0xC0,0x80,0x80,0x80,0x80,0xC1,0x7F,0x3F,0x08,0x00,0x00,0x00,/*"5",5*/
|
||||
0x00,0x00,0x00,0xE0,0xF8,0x9C,0x8E,0xC2,0xC3,0xC1,0x81,0x81,0x00,0x00,0x00,0x00,
|
||||
0x00,0x00,0x00,0x3F,0x7F,0xC0,0x80,0x80,0x80,0x80,0xC1,0x7F,0x3F,0x00,0x00,0x00,/*"6",6*/
|
||||
0x00,0x00,0x00,0x0F,0x03,0x03,0x03,0x03,0x83,0xE3,0x3B,0x0F,0x03,0x00,0x00,0x00,
|
||||
0x00,0x00,0x00,0x00,0x80,0xE0,0x78,0x1E,0x07,0x01,0x00,0x00,0x00,0x00,0x00,0x00,/*"7",7*/
|
||||
0x00,0x00,0x18,0x7E,0x7E,0xC3,0x81,0x81,0x81,0x81,0x67,0x7E,0x3C,0x00,0x00,0x00,
|
||||
0x00,0x00,0x1C,0x7E,0xFF,0xC1,0x80,0x80,0x80,0x81,0xE3,0x7F,0x3C,0x00,0x00,0x00,/*"8",8*/
|
||||
0x00,0x00,0x78,0xFE,0xC6,0x03,0x01,0x01,0x01,0x03,0x9E,0xFC,0xF0,0x00,0x00,0x00,
|
||||
0x00,0x00,0x00,0x01,0x01,0x83,0x83,0xC3,0x61,0x71,0x3F,0x0F,0x01,0x00,0x00,0x00,/*"9",9*/
|
||||
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
|
||||
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,/*" ",10*/
|
||||
|
||||
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xF0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
|
||||
0x00,0x00,0x01,0x01,0x01,0x01,0x01,0x01,0x1F,0x01,0x01,0x01,0x01,0x01,0x01,0x00,//"+",11
|
||||
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
|
||||
0x00,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x00,//"-",12
|
||||
|
||||
0x0E,0x11,0x11,0x0E,0xE0,0xF8,0x0C,0x06,0x03,0x01,0x01,0x01,0x01,0x02,0x1E,0x00,
|
||||
0x00,0x00,0x00,0x00,0x0F,0x3F,0x70,0xC0,0x80,0x80,0x80,0x80,0x80,0x40,0x20,0x00,/*"<22><>",13*/
|
||||
|
||||
0x00,0x00,0x00,0x00,0x00,0x00,0xC0,0xC0,0xC0,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,
|
||||
0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x30,0x30,0x00,0x00,0x00,0x00,0x00,0x00,//":",14
|
||||
|
||||
0x08,0x14,0x22,0x14,0x08,0x02,0x02,0xFE,0x06,0x02,0x02,0x02,0xC2,0x02,0x06,0x1E,
|
||||
0x00,0x00,0x00,0x00,0x00,0x80,0x80,0xFF,0x81,0x81,0x01,0x01,0x03,0x00,0x00,0x00,/*"<22>H",15*/
|
||||
|
||||
0xC0,0x30,0x08,0x04,0x04,0x02,0xFA,0xAA,0xFA,0x02,0x04,0x04,0x08,0x30,0xC0,0x00,
|
||||
0x07,0x18,0x20,0x40,0x58,0xA4,0xDB,0xDE,0xDB,0xA4,0x58,0x40,0x20,0x18,0x07,0x00,/*"<22>¶ȼ<C2B6>",16*/
|
||||
};
|
||||
|
||||
const u8 Maplib[] = {
|
||||
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
|
||||
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
|
||||
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x88,
|
||||
0x98,0xBF,0xBF,0x98,0x88,0x00,0x00,0x00,0x00,0x80,0x80,0x80,0x80,0x80,0x80,0x00,
|
||||
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
|
||||
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
|
||||
0x00,0x20,0x60,0x60,0x60,0x60,0x60,0x60,0x90,0x90,0x90,0x90,0x90,0x90,0x90,0x90,
|
||||
0x90,0x90,0x90,0x90,0x90,0x90,0x90,0x90,0x90,0x90,0x90,0x90,0x90,0x90,0x90,0x90,
|
||||
0x90,0x60,0x60,0x60,0x60,0x60,0x60,0x60,0x60,0x70,0xF8,0x88,0x84,0x82,0x82,0x83,
|
||||
0x83,0x83,0x83,0x83,0x83,0x82,0x82,0x82,0x82,0x83,0x83,0x83,0x83,0x83,0x83,0x82,
|
||||
0x82,0x82,0x82,0x82,0x86,0x84,0x84,0x84,0x84,0x84,0x84,0x84,0x84,0x84,0x84,0x84,
|
||||
0x84,0x84,0x84,0x84,0x84,0x84,0x82,0x82,0x82,0x82,0x82,0x82,0x82,0x82,0xFE,0x00,/*"C:\Users\888\Desktop\<5C><><EFBFBD><EFBFBD><EFBFBD><EFBFBD>.BMP",0*/
|
||||
|
||||
|
||||
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
|
||||
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
|
||||
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x90,
|
||||
0xB0,0xFE,0xFE,0xB0,0x90,0x00,0x00,0x00,0x00,0x80,0x80,0x80,0x80,0x80,0x80,0x00,
|
||||
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
|
||||
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
|
||||
0x00,0x20,0x60,0x60,0x60,0x60,0x60,0x60,0x90,0x90,0x90,0x90,0x90,0x90,0x90,0x90,
|
||||
0x90,0x90,0x90,0x90,0x90,0x90,0x90,0x90,0x90,0x90,0x90,0x90,0x90,0x90,0x90,0x90,
|
||||
0x90,0x60,0x60,0x60,0x60,0x60,0x60,0x60,0x60,0x70,0xF8,0x88,0x84,0x82,0x82,0x83,
|
||||
0x83,0x83,0x83,0x83,0x83,0x82,0x82,0x82,0x82,0x83,0x83,0x83,0x83,0x83,0x83,0x82,
|
||||
0x82,0x82,0x82,0x82,0x86,0x84,0x84,0x84,0x84,0x84,0x84,0x84,0x84,0x84,0x84,0x84,
|
||||
0x84,0x84,0x84,0x84,0x84,0x84,0x82,0x82,0x82,0x82,0x82,0x82,0x82,0x82,0xFE,0x00,/*"C:\Users\888\Desktop\<5C><><EFBFBD><EFBFBD><EFBFBD><EFBFBD>.BMP",0*/
|
||||
|
||||
// 0x80,0xC0,0xE0,0xF0,0xF8,0xFC,0x00,0x00,0xF0,0xF0,0xF0,0x00,0x00,0xF0,0xF0,0x00,//"<22><>ͷ"2//
|
||||
// 0x01,0x03,0x07,0x0F,0x1F,0x3F,0x00,0x00,0x0F,0x0F,0x0F,0x00,0x00,0x0F,0x0F,0x00,
|
||||
0x00,0xF0,0xF0,0x00,0x00,0xF0,0xF0,0xF0,0x00,0x00,0xFC,0xF8,0xF0,0xE0,0xC0,0x80, ///"<22><>ͷ"7///
|
||||
0x00,0x0F,0x0F,0x00,0x00,0x0F,0x0F,0x0F,0x00,0x00,0x3F,0x1F,0x0F,0x07,0x03,0x01,
|
||||
// 0x00,0xF8,0xF8,0x00,0x00,0xF8,0xF8,0xF8,0xF8,0x00,0x00,0xFE,0xFE,0xF8,0xE0,0x80,
|
||||
// 0x00,0x1F,0x1F,0x00,0x00,0x1F,0x1F,0x1F,0x1F,0x00,0x00,0x7F,0x7F,0x1F,0x07,0x01 //"<22><>ͷ8"//
|
||||
};
|
||||
|
||||
const u8 Maplib1[] = {/* 14 * 16*/
|
||||
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
|
||||
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,/*" ",15*/
|
||||
0x00,0x01,0xFF,0xFF,0x01,0x01,0x01,0x01,0x01,0x01,0x81,0xC6,0x7E,0x38,
|
||||
0x00,0x80,0xFF,0xFF,0x81,0x81,0x01,0x01,0x01,0x01,0x00,0x00,0x00,0x00,/*"P",0*/
|
||||
0x00,0x20,0x20,0x20,0xE0,0xE0,0x00,0x80,0x40,0x40,0x20,0x60,0xC0,0x40,
|
||||
0x00,0x80,0x80,0x80,0xFF,0xFF,0x81,0x80,0x80,0x80,0x00,0x00,0x00,0x00,/*"r",1*/
|
||||
0x00,0x00,0x00,0x80,0x40,0x40,0x20,0x20,0x20,0x40,0x40,0x80,0x00,0x00,
|
||||
0x00,0x00,0x3F,0x7F,0x44,0x84,0x84,0x84,0x84,0x84,0x84,0x47,0x27,0x00,/*"e",2*/
|
||||
0x00,0x00,0x00,0x80,0x40,0x40,0x20,0x20,0x20,0x40,0x40,0xC0,0x00,0x00,
|
||||
0x00,0x00,0x20,0xC3,0x82,0x86,0x84,0x84,0x8C,0x8C,0x88,0x78,0x30,0x00,/*"s",3*/
|
||||
0x00,0x00,0x00,0x80,0x40,0x40,0x20,0x20,0x20,0x40,0x40,0xC0,0x00,0x00,
|
||||
0x00,0x00,0x20,0xC3,0x82,0x86,0x84,0x84,0x8C,0x8C,0x88,0x78,0x30,0x00,/*"s",4*/
|
||||
|
||||
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x80,0xC0,0x60,0x20,0x10,0x18,0x0C,0x86,
|
||||
0xE0,0xE0,0xE0,0xEC,0xFC,0xF2,0xF3,0xF1,0xF0,0xF8,0xEC,0xE4,0xE4,0xE2,0xE3,0x01,/*"C:\Users\888\Desktop\sssss.BMP",0*/
|
||||
|
||||
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0xC0,0x40,0x20,0x30,0x18,0x0C,
|
||||
0xC0,0xC0,0xC0,0xD8,0xF8,0xE4,0xE6,0xE3,0xE1,0xF1,0xD8,0xC8,0xC8,0xC4,0xC6,0x03,/*"C:\Users\888\Desktop\sssss.BMP",0*/
|
||||
|
||||
0xFC,0xFC,0xFC,0x00,0x00,0x00,0x00,0xC0,0x38,0x26,0x25,0x01,0x01,0x01,0x01,0x01,
|
||||
0x01,0x01,0x01,0x02,0x7F,0x7F,0x7F,0x06,0x09,0x09,0x09,0x09,0x09,0x09,0x39,0x48,
|
||||
0x48,0x48,0x48,0x30,0x10,0x08,0x08,0x04,/*"C:\Users\888\Desktop\<5C><><EFBFBD><EFBFBD>.BMP",0*/
|
||||
|
||||
0xFC,0xFC,0x00,0x00,0x00,0x00,0xC0,0x38,0x26,0x25,0x01,0x01,0x01,0x01,0x01,0x01,
|
||||
0x01,0x01,0x02,0x02,0x7F,0x7F,0x06,0x09,0x09,0x09,0x09,0x09,0x09,0x39,0x48,0x48,
|
||||
0x48,0x48,0x30,0x10,0x08,0x08,0x04,0x04,/*"C:\Users\888\Desktop\<5C><><EFBFBD><EFBFBD>.BMP",0*/
|
||||
|
||||
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x80,0xC0,0x60,0x30,0x18,0x0C,0x86,
|
||||
0x00,0xE0,0xE0,0xEC,0xF4,0xF6,0xF6,0xFB,0xF5,0xE8,0xE8,0xE4,0xE2,0xE2,0xE1,0x00,/*"δ<><CEB4><EFBFBD><EFBFBD><EFBFBD>ļ<EFBFBD>",0*/
|
||||
|
||||
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0xC0,0x60,0x30,0x18,0x0C,
|
||||
0x00,0xC0,0xC0,0xD8,0xE8,0xEC,0xEC,0xF6,0xEB,0xD1,0xD1,0xC8,0xC4,0xC4,0xC2,0x01,/*"δ<><CEB4><EFBFBD><EFBFBD><EFBFBD>ļ<EFBFBD>",0*/
|
||||
|
||||
0xFE,0xFE,0xFE,0x80,0x40,0x40,0x60,0x58,0x54,0x02,0x02,0x02,0x02,0x02,0x02,0x84,
|
||||
0x3F,0x3F,0x3F,0x00,0x01,0x01,0x01,0x01,0x01,0x07,0x05,0x05,0x06,0x02,0x01,0x00,/*"δ<><CEB4><EFBFBD><EFBFBD><EFBFBD>ļ<EFBFBD>",0*/
|
||||
|
||||
0xFE,0xFE,0x80,0x40,0x40,0x60,0x58,0x54,0x02,0x02,0x02,0x02,0x02,0x02,0x84,0x84,
|
||||
0x3F,0x3F,0x00,0x01,0x01,0x01,0x01,0x01,0x07,0x05,0x05,0x06,0x02,0x01,0x00,0x00,/*"δ<><CEB4><EFBFBD><EFBFBD><EFBFBD>ļ<EFBFBD>",0*/
|
||||
};
|
||||
|
||||
const u8 MiniTS[] = {/*16*16*/
|
||||
0x01,0xF9,0xFF,0x3F,0xFF,0xF0,0x80,0x00,0x80,0xF0,0x7E,0xFF,0xFF,0xFF,0x01,0x01,
|
||||
0x80,0xFF,0xFF,0x80,0x83,0x1F,0xFF,0xF8,0x3F,0x87,0x80,0xFF,0xFF,0xFF,0x80,0x80,/*"M",0*/
|
||||
0x00,0x00,0x00,0x20,0x20,0x20,0x63,0xE3,0xE3,0x03,0x00,0x00,0x00,0x00,0x00,0x00,
|
||||
0x00,0x00,0x00,0x80,0x80,0x80,0x80,0xFF,0xFF,0x80,0x80,0x80,0x80,0x00,0x00,0x00,/*"i",1*/
|
||||
0x00,0x20,0xE0,0xE0,0xE0,0xC0,0x40,0x60,0x20,0x20,0x60,0xC0,0xC0,0x00,0x00,0x00,
|
||||
0x00,0x80,0xFF,0xFF,0xFF,0x80,0x80,0x00,0x00,0x80,0x80,0xFF,0xFF,0x80,0x80,0x00,/*"n",2*/
|
||||
0x00,0x00,0x00,0x20,0x20,0x20,0x63,0xE3,0xE3,0x03,0x00,0x00,0x00,0x00,0x00,0x00,
|
||||
0x00,0x00,0x00,0x80,0x80,0x80,0x80,0xFF,0xFF,0x80,0x80,0x80,0x80,0x00,0x00,0x00,/*"i",3*/
|
||||
0x00,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x00,
|
||||
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,/*"-",4*/
|
||||
0x00,0x06,0x07,0x03,0x01,0x01,0xFF,0xFF,0xFF,0x01,0x01,0x01,0x03,0x0F,0x0C,0x00,
|
||||
0x00,0x00,0x00,0x00,0x80,0x80,0xFF,0xFF,0xFF,0x80,0x80,0x00,0x00,0x00,0x00,0x00,/*"T",5*/
|
||||
0x00,0x00,0x00,0x80,0xC0,0x40,0x60,0x20,0x20,0x60,0x40,0xC0,0x80,0x00,0x00,0x00,
|
||||
0x00,0x0E,0x3F,0x7F,0xE1,0x80,0x80,0x80,0x80,0x80,0xC0,0x71,0x7F,0x3F,0x00,0x00,/*"o",6*/
|
||||
0x00,0x00,0x00,0x80,0xC0,0x40,0x60,0x20,0x20,0x60,0x40,0xC0,0x80,0x00,0x00,0x00,
|
||||
0x00,0x0E,0x3F,0x7F,0xE1,0x80,0x80,0x80,0x80,0x80,0xC0,0x71,0x7F,0x3F,0x00,0x00,/*"o",7*/
|
||||
0x00,0x00,0x00,0x01,0x01,0x01,0x01,0xFF,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
|
||||
0x00,0x00,0x00,0x80,0x80,0x80,0x80,0xFF,0xFF,0x80,0x80,0x80,0x80,0x00,0x00,0x00,/*"l",8*/
|
||||
0x00,0x00,0x00,0x80,0xC0,0x40,0x60,0x20,0x20,0x60,0x40,0xC0,0xC0,0x00,0x00,0x00,
|
||||
0x00,0x00,0x20,0xE3,0xC3,0x86,0x86,0x84,0x8C,0x8C,0x8C,0xF8,0x78,0x30,0x00,0x00,/*"s",9*/
|
||||
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
|
||||
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,/*" ",10*/
|
||||
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
|
||||
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,/*" ",11*/
|
||||
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
|
||||
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,/*" ",12*/
|
||||
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
|
||||
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,/*" ",13*/
|
||||
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
|
||||
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,/*" ",14*/
|
||||
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
|
||||
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,/*" ",15*/
|
||||
};
|
||||
//const u8 Arrow[] = {/*16*16*/
|
||||
// 0x00,0x03,0x0E,0x18,0x60,0xC3,0x06,0x18,0x70,0xC0,0x00,0x00,0x00,0x80,0x60,0x38,
|
||||
// 0x0C,0x83,0xC1,0x30,0x0C,0x07,0x01,0x00,/*"<22><>",0*/
|
||||
|
||||
// 0x00,0x00,0xC0,0x60,0x18,0x0C,0xC3,0x71,0x18,0x06,0x03,0x00,0x00,0x01,0x03,0x0C,
|
||||
// 0x30,0x61,0x87,0x0C,0x30,0xE0,0x80,0x00,/*"<22><>",0*/
|
||||
|
||||
// 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
|
||||
// 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,/*" ",0*/
|
||||
//};
|
||||
const u8 Triangle[] = {/*16*16*/
|
||||
0x80,0x80,0x40,0x40,0x20,0x20,0x10,0x10,0x08,0x08,0x04,0x04,0xFE,0x00,0x00,0x00,
|
||||
0x00,0x00,0x01,0x01,0x02,0x02,0x04,0x04,0x08,0x08,0x10,0x10,0x3F,0x00,0x00,0x00,/*"<22><><EFBFBD><EFBFBD>",0*/
|
||||
|
||||
0x00,0x00,0xFE,0x04,0x04,0x08,0x08,0x10,0x10,0x20,0x20,0x40,0x40,0x80,0x80,0x00,
|
||||
0x00,0x00,0x3F,0x10,0x10,0x08,0x08,0x04,0x04,0x02,0x02,0x01,0x01,0x00,0x00,0x00,/*"<22>ҡ<EFBFBD>",0*/
|
||||
|
||||
0x00,0x80,0x80,0xC0,0xC0,0x60,0x60,0x30,0x30,0x18,0x18,0x0C,0x0C,0xFE,0x00,0x00,
|
||||
0x00,0x01,0x01,0x03,0x03,0x06,0x06,0x0C,0x0C,0x18,0x18,0x30,0x30,0x7F,0x00,0x00,/*"<22>Ӵ<EFBFBD><D3B4><EFBFBD><EFBFBD><EFBFBD>",0*/
|
||||
|
||||
0x00,0x00,0xFE,0x0C,0x0C,0x18,0x18,0x30,0x30,0x60,0x60,0xC0,0xC0,0x80,0x80,0x00,
|
||||
0x00,0x00,0x7F,0x30,0x30,0x18,0x18,0x0C,0x0C,0x06,0x06,0x03,0x03,0x01,0x01,0x00,/*"<22>Ӵ<EFBFBD><D3B4>ҡ<EFBFBD>",0*/
|
||||
|
||||
0x80,0x80,0xC0,0xC0,0xE0,0xE0,0xF0,0xF0,0xF8,0xF8,0xFC,0xFC,0xFE,0x00,0x00,0x00,
|
||||
0x00,0x00,0x01,0x01,0x03,0x03,0x07,0x07,0x0F,0x0F,0x1F,0x1F,0x3F,0x00,0x00,0x00,/*"<22><><EFBFBD><EFBFBD>",1*/
|
||||
|
||||
0x00,0x00,0xFE,0xFC,0xFC,0xF8,0xF8,0xF0,0xF0,0xE0,0xE0,0xC0,0xC0,0x80,0x80,0x00,
|
||||
0x00,0x00,0x3F,0x1F,0x1F,0x0F,0x0F,0x07,0x07,0x03,0x03,0x01,0x01,0x00,0x00,0x00,/*"<22>ҡ<EFBFBD>",1*/
|
||||
};
|
||||
|
||||
const u8 IhIcon[] = {
|
||||
0x00,0xF0,0xFE,0xFF,0xF0,0x00,
|
||||
0x00,0x7F,0x7F,0x7F,0x7F,0x00,/*"<22><><EFBFBD><EFBFBD>",0*/
|
||||
|
||||
0xFF,0x0F,0xE1,0xE0,0x0F,0xFF,
|
||||
0xFF,0x80,0xBF,0xBF,0x80,0xFF,/*"<22><><EFBFBD><EFBFBD>",0*/
|
||||
};
|
||||
const u8 TempIcon[] = {/*16*16*/
|
||||
0x10,0x18,0x8C,0xC6,0x63,0x63,0xC6,0x8C,0x18,0x10,
|
||||
0x42,0x63,0x31,0x18,0x0C,0x0C,0x18,0x31,0x63,0x42,/*"10*16",0*/
|
||||
|
||||
0x00,0xF0,0x1E,0x1F,0xF0,0x00,
|
||||
0x00,0xFF,0x80,0x80,0xFF,0x00,/*"6*16",0*/
|
||||
|
||||
0x42,0xC6,0x8C,0x18,0x30,0x30,0x18,0x8C,0xC6,0x42,
|
||||
0x08,0x18,0x31,0x63,0xC6,0xC6,0x63,0x31,0x18,0x08,/*"10*16",1*/
|
||||
|
||||
0x8C,0x8C,0xC6,0xC6,0x8C,0x8C,0xC6,0xC6,0x8C,0x8C,
|
||||
0x31,0x31,0x18,0x18,0x31,0x31,0x18,0x18,0x31,0x31,/*"10*16",2*/
|
||||
|
||||
|
||||
0x00,0x8C,0x8C,0x8C,0x8C,0x8C,0x8C,0x8C,0x8C,0x8C,0x8C,0x8C,0x8C,0x8C,0x8C,0x00,
|
||||
0x00,0x31,0x31,0x31,0x31,0x31,0x31,0x31,0x31,0x31,0x31,0x31,0x31,0x31,0x31,0x00,/*"<22>¶<EFBFBD>ƽ<EFBFBD><C6BD>",0*/
|
||||
|
||||
0x80,0xC0,0x60,0x30,0x98,0xCC,0x66,0x33,0x33,0x66,0xCC,0x98,0x30,0x60,0xC0,0x80,
|
||||
0x88,0xCC,0x66,0x33,0x19,0x0C,0x06,0x03,0x03,0x06,0x0C,0x19,0x33,0x66,0xCC,0x88,/*"<22><><EFBFBD><EFBFBD>",0*/
|
||||
|
||||
0x11,0x33,0x66,0xCC,0x98,0x30,0x60,0xC0,0xC0,0x60,0x30,0x98,0xCC,0x66,0x33,0x11,
|
||||
0x01,0x03,0x06,0x0C,0x19,0x33,0x66,0xCC,0xCC,0x66,0x33,0x19,0x0C,0x06,0x03,0x01,/*"<22><><EFBFBD><EFBFBD>",0*/
|
||||
};
|
||||
|
||||
const u8 Warning[] = {/*10*16*/
|
||||
0x01,0xFF,0x00,0xE1,0x1F,0xE0,0x00,0xFF,0x01,0x00,0x00,0x01,0x1E,0x01,0x00,0x01,
|
||||
0x1E,0x01,0x00,0x00,/*"W",0*/
|
||||
0x00,0x60,0x10,0x10,0x90,0x90,0xE0,0x00,0x00,0x00,0x00,0x0E,0x11,0x11,0x10,0x08,
|
||||
0x1F,0x18,0x00,0x00,/*"a",1*/
|
||||
0x10,0x10,0xF0,0x40,0x20,0x10,0x10,0x30,0x00,0x00,0x10,0x10,0x1F,0x10,0x10,0x00,
|
||||
0x00,0x00,0x00,0x00,/*"r",2*/
|
||||
0x10,0xF0,0x20,0x10,0x10,0x10,0x10,0xE0,0x00,0x00,0x10,0x1F,0x10,0x00,0x00,0x00,
|
||||
0x10,0x1F,0x10,0x00,/*"n",3*/
|
||||
0x00,0x00,0x10,0x13,0xF3,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x10,0x10,0x1F,0x10,
|
||||
0x10,0x00,0x00,0x00,/*"i",4*/
|
||||
0x10,0xF0,0x20,0x10,0x10,0x10,0x10,0xE0,0x00,0x00,0x10,0x1F,0x10,0x00,0x00,0x00,
|
||||
0x10,0x1F,0x10,0x00,/*"n",5*/
|
||||
0x00,0xE0,0x10,0x10,0x10,0x10,0xF0,0x10,0x00,0x00,0x00,0x7D,0x8A,0x8A,0x8A,0x8A,
|
||||
0x91,0x70,0x00,0x00,/*"g",6*/
|
||||
|
||||
0x00,0x00,0x00,0x80,0xE0,0xF8,0xFE,0x07,0x07,0xFE,0xF8,0xE0,0x80,0x00,0x00,0x00,
|
||||
0x10,0x1C,0x1F,0x1F,0x1F,0x1F,0x1F,0x12,0x12,0x1F,0x1F,0x1F,0x1F,0x1F,0x1C,0x10,/*"C:\Users\888\Desktop\attention.bmp",0*/
|
||||
};
|
||||
const u8 SenErr[] = {/*10*16*/
|
||||
0x00,0x1C,0x22,0x21,0x41,0x41,0x41,0x82,0x07,0x00,0x00,0x1E,0x08,0x10,0x10,0x10,
|
||||
0x10,0x08,0x07,0x00,/*"S",0*/
|
||||
0x00,0xC0,0xA0,0x90,0x90,0x90,0x90,0xA0,0xC0,0x00,0x00,0x07,0x08,0x10,0x10,0x10,
|
||||
0x10,0x08,0x04,0x00,/*"e",1*/
|
||||
0x10,0xF0,0x20,0x10,0x10,0x10,0x10,0xE0,0x00,0x00,0x10,0x1F,0x10,0x00,0x00,0x00,
|
||||
0x10,0x1F,0x10,0x00,/*"n",2*/
|
||||
0x00,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
|
||||
0x00,0x00,0x00,0x00,/*"-",3*/
|
||||
0x01,0xFF,0x21,0x21,0x21,0x21,0xF9,0x03,0x04,0x00,0x10,0x1F,0x10,0x10,0x10,0x10,
|
||||
0x10,0x18,0x04,0x00,/*"E",4*/
|
||||
0x00,0x10,0x10,0xF0,0x40,0x20,0x10,0x10,0x30,0x00,0x00,0x10,0x10,0x1F,0x10,0x10,
|
||||
0x00,0x00,0x00,0x00,/*"r",5*/
|
||||
0x00,0x10,0x10,0xF0,0x40,0x20,0x10,0x10,0x30,0x00,0x00,0x10,0x10,0x1F,0x10,0x10,
|
||||
0x00,0x00,0x00,0x00,/*"r",6*/
|
||||
|
||||
};
|
||||
const u8 HighVt[] = {/*10*16*/
|
||||
0x01,0xFF,0x41,0x40,0x40,0x40,0x41,0xFF,0x01,0x00,0x10,0x1F,0x10,0x00,0x00,0x00,
|
||||
0x10,0x1F,0x10,0x00,/*"H",0*/
|
||||
0x00,0x00,0x10,0x13,0xF3,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x10,0x10,0x1F,0x10,
|
||||
0x10,0x00,0x00,0x00,/*"i",1*/
|
||||
0x00,0x00,0xE0,0x10,0x10,0x10,0x10,0xF0,0x10,0x00,0x00,0x60,0x9D,0x8A,0x8A,0x8A,
|
||||
0x8A,0x91,0x70,0x00,/*"g",2*/
|
||||
0x01,0xFF,0x20,0x10,0x10,0x10,0x10,0xE0,0x00,0x00,0x10,0x1F,0x10,0x00,0x00,0x00,
|
||||
0x10,0x1F,0x10,0x00,/*"h",3*/
|
||||
0x00,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
|
||||
0x00,0x00,0x00,0x00,/*"-",3*/
|
||||
0x01,0x07,0x79,0x80,0x00,0x80,0x79,0x07,0x01,0x00,0x00,0x00,0x00,0x07,0x1C,0x07,
|
||||
0x00,0x00,0x00,0x00,/*"V",5*/
|
||||
0x00,0x00,0x10,0x10,0xFE,0x10,0x10,0x10,0x00,0x00,0x00,0x00,0x00,0x00,0x0F,0x10,
|
||||
0x10,0x08,0x00,0x00,/*"t",6*/
|
||||
};
|
||||
const u8 LowVot[] = {/*10*16*/
|
||||
0x01,0xFF,0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x10,0x1F,0x10,0x10,0x10,0x10,
|
||||
0x10,0x18,0x04,0x00,/*"L",0*/
|
||||
0x00,0xC0,0x20,0x10,0x10,0x10,0x10,0x20,0xC0,0x00,0x00,0x07,0x08,0x10,0x10,0x10,
|
||||
0x10,0x08,0x07,0x00,/*"o",1*/
|
||||
0x10,0xF0,0x00,0x10,0xF0,0x10,0x00,0xF0,0x10,0x00,0x00,0x03,0x1C,0x03,0x00,0x03,
|
||||
0x1C,0x03,0x00,0x00,/*"w",2*/
|
||||
0x00,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
|
||||
0x00,0x00,0x00,0x00,/*"-",3*/
|
||||
0x01,0x07,0x79,0x80,0x00,0x80,0x79,0x07,0x01,0x00,0x00,0x00,0x00,0x07,0x1C,0x07,
|
||||
0x00,0x00,0x00,0x00,/*"V",4*/
|
||||
0x00,0xC0,0x20,0x10,0x10,0x10,0x10,0x20,0xC0,0x00,0x00,0x07,0x08,0x10,0x10,0x10,
|
||||
0x10,0x08,0x07,0x00,/*"o",5*/
|
||||
0x00,0x00,0x10,0x10,0xFE,0x10,0x10,0x10,0x00,0x00,0x00,0x00,0x00,0x00,0x0F,0x10,
|
||||
0x10,0x08,0x00,0x00,/*"t",6*/
|
||||
};
|
||||
|
||||
const u8 Cal_UnDone[] = { /*16*16 Cal_Ud*/
|
||||
0xE0,0x18,0x04,0x02,0x12,0x21,0x41,0x81,0x81,0x41,0x22,0x12,0x04,0x18,0xE0,0x00,
|
||||
0x03,0x0C,0x10,0x20,0x28,0x44,0x42,0x41,0x41,0x42,0x24,0x28,0x10,0x0C,0x03,0x00,/*"Уʧ<D7BC><CAA7>.BMP",0*/
|
||||
|
||||
0xF0,0x0C,0x02,0x01,0x01,0x01,0x01,0x02,0x0F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
|
||||
0x03,0x0C,0x08,0x10,0x10,0x10,0x10,0x08,0x06,0x00,0x00,0x00,0x00,0x00,0x00,0x00,/*"C",0*/
|
||||
0x00,0x60,0x10,0x10,0x90,0x90,0x90,0xE0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
|
||||
0x00,0x0E,0x11,0x11,0x10,0x10,0x08,0x1F,0x10,0x18,0x00,0x00,0x00,0x00,0x00,0x00,/*"a",1*/
|
||||
0x00,0x01,0x01,0x01,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
|
||||
0x00,0x10,0x10,0x10,0x1F,0x10,0x10,0x10,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,/*"l",2*/
|
||||
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
|
||||
0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x00,0x00,0x00,/*"_",3*/
|
||||
0x00,0x01,0x07,0x19,0xE0,0xB0,0x0D,0x03,0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
|
||||
0x00,0x10,0x18,0x17,0x00,0x01,0x16,0x18,0x10,0x00,0x00,0x00,0x00,0x00,0x00,0x00,/*"X",4*/
|
||||
|
||||
};
|
||||
|
||||
const u8 Cal_Done[] = {/*16*16 Cal_Dn*/
|
||||
0xE0,0x18,0x64,0xE2,0x82,0x01,0x01,0x01,0x01,0x01,0x82,0xE2,0x64,0x18,0xE0,0x00,
|
||||
0x03,0x0C,0x10,0x21,0x27,0x4E,0x58,0x50,0x58,0x4E,0x27,0x21,0x10,0x0C,0x03,0x00,/*"У<D0A3>ɹ<EFBFBD>.BMP",0*/
|
||||
|
||||
0xF0,0x0C,0x02,0x01,0x01,0x01,0x01,0x02,0x0F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
|
||||
0x03,0x0C,0x08,0x10,0x10,0x10,0x10,0x08,0x06,0x00,0x00,0x00,0x00,0x00,0x00,0x00,/*"C",0*/
|
||||
0x00,0x60,0x10,0x10,0x90,0x90,0x90,0xE0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
|
||||
0x00,0x0E,0x11,0x11,0x10,0x10,0x08,0x1F,0x10,0x18,0x00,0x00,0x00,0x00,0x00,0x00,/*"a",1*/
|
||||
0x00,0x01,0x01,0x01,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
|
||||
0x00,0x10,0x10,0x10,0x1F,0x10,0x10,0x10,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,/*"l",2*/
|
||||
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
|
||||
0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x00,0x00,0x00,/*"_",3*/
|
||||
0x01,0x07,0x79,0x80,0x00,0x80,0x79,0x07,0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
|
||||
0x00,0x00,0x00,0x07,0x1C,0x07,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,/*"V",4*/
|
||||
|
||||
};
|
||||
|
||||
const u8 Number12[] = {/*12*16*/
|
||||
0x00,0xE0,0x10,0x08,0x08,0x10,0xE0,0x00,0x00,0x00,0x00,0x00,0x00,0x0F,0x10,0x20,
|
||||
0x20,0x10,0x0F,0x00,0x00,0x00,0x00,0x00,/*"0",0*/
|
||||
0x00,0x10,0x10,0xF8,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x20,0x20,0x3F,
|
||||
0x20,0x20,0x00,0x00,0x00,0x00,0x00,0x00,/*"1",1*/
|
||||
0x00,0x70,0x08,0x08,0x08,0x88,0x70,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x28,0x24,
|
||||
0x22,0x21,0x30,0x00,0x00,0x00,0x00,0x00,/*"2",2*/
|
||||
0x00,0x30,0x08,0x88,0x88,0x48,0x30,0x00,0x00,0x00,0x00,0x00,0x00,0x18,0x20,0x20,
|
||||
0x20,0x11,0x0E,0x00,0x00,0x00,0x00,0x00,/*"3",3*/
|
||||
0x00,0x00,0xC0,0x20,0x10,0xF8,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x07,0x04,0x24,
|
||||
0x24,0x3F,0x24,0x00,0x00,0x00,0x00,0x00,/*"4",4*/
|
||||
0x00,0xF8,0x08,0x88,0x88,0x08,0x08,0x00,0x00,0x00,0x00,0x00,0x00,0x19,0x21,0x20,
|
||||
0x20,0x11,0x0E,0x00,0x00,0x00,0x00,0x00,/*"5",5*/
|
||||
0x00,0xE0,0x10,0x88,0x88,0x18,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0F,0x11,0x20,
|
||||
0x20,0x11,0x0E,0x00,0x00,0x00,0x00,0x00,/*"6",6*/
|
||||
0x00,0x38,0x08,0x08,0xC8,0x38,0x08,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,
|
||||
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,/*"7",7*/
|
||||
0x00,0x70,0x88,0x08,0x08,0x88,0x70,0x00,0x00,0x00,0x00,0x00,0x00,0x1C,0x22,0x21,
|
||||
0x21,0x22,0x1C,0x00,0x00,0x00,0x00,0x00,/*"8",8*/
|
||||
0x00,0xE0,0x10,0x08,0x08,0x10,0xE0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x31,0x22,
|
||||
0x22,0x11,0x0F,0x00,0x00,0x00,0x00,0x00,/*"9",9*/
|
||||
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x00,
|
||||
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,/*".",10*/
|
||||
};
|
||||
|
||||
const u8 Number10[] = { /*10*16*/
|
||||
0x00,0xE0,0x18,0x04,0x04,0x04,0x04,0x18,0xE0,0x00,0x00,0x0F,0x30,0x40,0x40,0x40,
|
||||
0x40,0x30,0x0F,0x00,/*"0",0*/
|
||||
0x00,0x00,0x08,0x08,0xFC,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x40,0x40,0x7F,0x40,
|
||||
0x40,0x00,0x00,0x00,/*"1",1*/
|
||||
0x00,0x78,0x04,0x04,0x04,0x04,0x04,0x88,0x70,0x00,0x00,0x60,0x50,0x48,0x44,0x42,
|
||||
0x41,0x40,0x70,0x00,/*"2",2*/
|
||||
0x00,0x38,0x04,0x04,0x84,0x84,0xC8,0x30,0x00,0x00,0x00,0x38,0x40,0x40,0x40,0x40,
|
||||
0x40,0x21,0x1E,0x00,/*"3",3*/
|
||||
0x00,0x00,0x80,0x60,0x10,0x08,0xFE,0x00,0x00,0x00,0x00,0x07,0x04,0x04,0x44,0x44,
|
||||
0x7F,0x44,0x44,0x00,/*"4",4*/
|
||||
0x00,0x00,0xFC,0x04,0x84,0x84,0x84,0x04,0x04,0x00,0x00,0x38,0x41,0x41,0x40,0x40,
|
||||
0x40,0x21,0x1E,0x00,/*"5",5*/
|
||||
0x00,0xC0,0x30,0x88,0x84,0x84,0x84,0x04,0x18,0x00,0x00,0x0F,0x31,0x40,0x40,0x40,
|
||||
0x40,0x21,0x1E,0x00,/*"6",6*/
|
||||
0x00,0x1C,0x04,0x04,0x84,0x44,0x34,0x0C,0x04,0x00,0x00,0x00,0x00,0x7E,0x01,0x00,
|
||||
0x00,0x00,0x00,0x00,/*"7",7*/
|
||||
0x00,0x70,0x88,0x04,0x04,0x04,0x04,0x88,0x70,0x00,0x00,0x1C,0x22,0x41,0x41,0x41,
|
||||
0x41,0x22,0x1C,0x00,/*"8",8*/
|
||||
0x00,0xF0,0x08,0x04,0x04,0x04,0x04,0x18,0xE0,0x00,0x00,0x30,0x41,0x42,0x42,0x42,
|
||||
0x22,0x19,0x07,0x00,/*"9",9*/
|
||||
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
|
||||
0x00,0x00,0x00,0x00,/*" ",10*/
|
||||
0x1C,0x1C,0xC0,0x30,0x08,0x04,0x04,0x04,0x08,0x30,0x00,0x00,0x07,0x18,0x20,0x40,
|
||||
0x40,0x40,0x20,0x10,/*"<22><>",11*/
|
||||
0x1C,0x12,0x0C,0x02,0x02,0xFE,0x82,0x82,0xE2,0x02,0x00,0x00,0x00,0x00,0x40,0x7F,
|
||||
0x40,0x00,0x03,0x00,/*"<22>H",12*/
|
||||
|
||||
};
|
||||
|
||||
const u8 Guide[] = { /*16*16*/
|
||||
0x00,0x00,0x30,0x60,0xC0,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
|
||||
0x00,0x00,0x18,0x0C,0x06,0x03,0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,/*"D:\yinyongqin\<5C><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>\<5C><><EFBFBD><EFBFBD>.BMP",0*/
|
||||
0x00,0x00,0x30,0x60,0xC0,0x80,0x30,0x60,0xC0,0x80,0x00,0x00,0x00,0x00,0x00,0x00,
|
||||
0x00,0x00,0x18,0x0C,0x06,0x03,0x19,0x0C,0x06,0x03,0x01,0x00,0x00,0x00,0x00,0x00,/*"D:\yinyongqin\<5C><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>\<5C><><EFBFBD><EFBFBD>.BMP",0*/
|
||||
0x00,0x00,0x30,0x60,0xC0,0x80,0x30,0x60,0xC0,0x80,0x30,0x60,0xC0,0x80,0x00,0x00,
|
||||
0x00,0x00,0x18,0x0C,0x06,0x03,0x19,0x0C,0x06,0x03,0x19,0x0C,0x06,0x03,0x01,0x00,/*"D:\yinyongqin\<5C><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>\<5C><><EFBFBD><EFBFBD>.BMP",0*/
|
||||
0x00,0x00,0x18,0x30,0x60,0xC0,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
|
||||
0x00,0x00,0x0C,0x06,0x03,0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,/*">",0*/
|
||||
0x00,0x00,0x18,0x30,0x60,0xC0,0x98,0x30,0x60,0xC0,0x80,0x00,0x00,0x00,0x00,0x00,
|
||||
0x00,0x00,0x0C,0x06,0x03,0x01,0x0C,0x06,0x03,0x01,0x00,0x00,0x00,0x00,0x00,0x00,/*">>",0*/
|
||||
0x00,0x00,0x18,0x30,0x60,0xC0,0x98,0x30,0x60,0xC0,0x98,0x30,0x60,0xC0,0x80,0x00,
|
||||
0x00,0x00,0x0C,0x06,0x03,0x01,0x0C,0x06,0x03,0x01,0x0C,0x06,0x03,0x01,0x00,0x00,/*">>>",0*/
|
||||
};
|
||||
const u8 Config[] = { /*16*16*/
|
||||
0x00,0x00,0x00,0xC0,0xF0,0x38,0x08,0x04,0x04,0x04,0x04,0x08,0x08,0x1C,0x00,0x00,
|
||||
0x00,0x00,0x00,0x0F,0x1F,0x30,0x60,0x40,0x40,0x40,0x40,0x20,0x30,0x08,0x00,0x00,/*"C",0*/
|
||||
0x00,0x00,0x00,0xC0,0xF0,0x18,0x0C,0x04,0x04,0x04,0x0C,0x18,0xF0,0xC0,0x00,0x00,
|
||||
0x00,0x00,0x00,0x07,0x1F,0x30,0x60,0x40,0x40,0x40,0x60,0x30,0x1F,0x07,0x00,0x00,/*"O",1*/
|
||||
0x00,0x00,0x00,0x04,0xFC,0x1C,0x38,0xE0,0xC0,0x00,0x00,0x04,0xFC,0x04,0x00,0x00,
|
||||
0x00,0x00,0x00,0x40,0x7F,0x40,0x00,0x00,0x01,0x07,0x1E,0x38,0x7F,0x00,0x00,0x00,/*"N",2*/
|
||||
0x00,0x00,0x00,0x04,0xFC,0xFC,0x84,0x84,0x84,0x84,0xE4,0x04,0x0C,0x10,0x00,0x00,
|
||||
0x00,0x00,0x00,0x40,0x7F,0x7F,0x40,0x00,0x00,0x00,0x03,0x00,0x00,0x00,0x00,0x00,/*"F",3*/
|
||||
0x00,0x00,0x00,0x00,0x00,0x04,0x04,0x04,0xFC,0xFC,0x04,0x04,0x04,0x00,0x00,0x00,
|
||||
0x00,0x00,0x00,0x00,0x00,0x40,0x40,0x40,0x7F,0x7F,0x40,0x40,0x40,0x00,0x00,0x00,/*"I",4*/
|
||||
0x00,0x00,0x00,0xC0,0xF0,0x38,0x08,0x04,0x04,0x04,0x04,0x0C,0x1C,0x00,0x00,0x00,
|
||||
0x00,0x00,0x00,0x07,0x1F,0x38,0x60,0x40,0x40,0x42,0x42,0x3E,0x3E,0x02,0x02,0x00,/*"G",5*/
|
||||
};
|
||||
#endif
|
||||
@@ -1,73 +0,0 @@
|
||||
/******************** (C) COPYRIGHT 2013 e-Design Co., Ltd. ********************
|
||||
File Name : USB_bot.h
|
||||
Version : STM32 USB Disk Ver 3.4 Author : MCD Application Team & bure
|
||||
*******************************************************************************/
|
||||
#ifndef __USB_BOT_H
|
||||
#define __USB_BOT_H
|
||||
|
||||
typedef struct _Bulk_Only_CBW
|
||||
{
|
||||
u32 dSignature;
|
||||
u32 dTag;
|
||||
u32 dDataLength;
|
||||
u8 bmFlags;
|
||||
u8 bLUN;
|
||||
u8 bCBLength;
|
||||
u8 CB[16];
|
||||
}
|
||||
Bulk_Only_CBW;
|
||||
|
||||
/* Bulk-only Command Status Wrapper */
|
||||
typedef struct _Bulk_Only_CSW
|
||||
{
|
||||
u32 dSignature;
|
||||
u32 dTag;
|
||||
u32 dDataResidue;
|
||||
u8 bStatus;
|
||||
}
|
||||
Bulk_Only_CSW;
|
||||
|
||||
#define BOT_IDLE 0 /* Idle state */
|
||||
#define BOT_DATA_OUT 1 /* Data Out state */
|
||||
#define BOT_DATA_IN 2 /* Data In state */
|
||||
#define BOT_DATA_IN_LAST 3 /* Last Data In Last */
|
||||
#define BOT_CSW_Send 4 /* Command Status Wrapper */
|
||||
#define BOT_ERROR 5 /* error state */
|
||||
|
||||
#define BOT_CBW_SIGNATURE 0x43425355
|
||||
#define BOT_CSW_SIGNATURE 0x53425355
|
||||
#define BOT_CBW_PACKET_LENGTH 31
|
||||
|
||||
#define CSW_DATA_LENGTH 0x000D
|
||||
|
||||
/* CSW Status Definitions */
|
||||
#define CSW_CMD_PASSED 0x00
|
||||
#define CSW_CMD_FAILED 0x01
|
||||
#define CSW_PHASE_ERROR 0x02
|
||||
|
||||
#define SEND_CSW_DISABLE 0
|
||||
#define SEND_CSW_ENABLE 1
|
||||
|
||||
#define DIR_IN 0
|
||||
#define DIR_OUT 1
|
||||
#define BOTH_DIR 2
|
||||
|
||||
#define BULK_MAX_PACKET_SIZE 0x00000040
|
||||
|
||||
extern u8 Bot_State;
|
||||
extern u16 Data_Len;
|
||||
extern u8 Bot_State;
|
||||
extern Bulk_Only_CBW CBW;
|
||||
extern Bulk_Only_CSW CSW;
|
||||
extern u8 Bulk_Buff[];
|
||||
|
||||
void Mass_Storage_In (void);
|
||||
void Mass_Storage_Out (void);
|
||||
void CBW_Decode(void);
|
||||
void Transfer_Data_Request(u8* Data_Pointer, u16 Data_Len);
|
||||
void Set_CSW (u8 CSW_Status, u8 Send_Permission);
|
||||
void Bot_Abort(u8 Direction);
|
||||
|
||||
#endif
|
||||
/********************************* END OF FILE ******************************/
|
||||
|
||||
@@ -1,73 +0,0 @@
|
||||
/******************** (C) COPYRIGHT 2008 STMicroelectronics ********************
|
||||
* File Name : usb_conf.h
|
||||
* Author : MCD Application Team
|
||||
* Version : V2.2.1
|
||||
* Date : 09/22/2008
|
||||
* Description : Mass Storage Demo configuration header
|
||||
********************************************************************************
|
||||
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
|
||||
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
|
||||
* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
|
||||
* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
|
||||
* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
|
||||
* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
|
||||
*******************************************************************************/
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __USB_CONF_H
|
||||
#define __USB_CONF_H
|
||||
|
||||
/*-------------------------------------------------------------*/
|
||||
/* EP_NUM */
|
||||
/* defines how many endpoints are used by the device */
|
||||
/*-------------------------------------------------------------*/
|
||||
#define EP_NUM (3)
|
||||
|
||||
/*-------------------------------------------------------------*/
|
||||
/* -------------- Buffer Description Table -----------------*/
|
||||
/*-------------------------------------------------------------*/
|
||||
/* buffer table base address */
|
||||
|
||||
#define BTABLE_ADDRESS (0x00)
|
||||
|
||||
/* EP0 */
|
||||
/* rx/tx buffer base address */
|
||||
#define ENDP0_RXADDR (0x18)
|
||||
#define ENDP0_TXADDR (0x58)
|
||||
|
||||
/* EP1 */
|
||||
/* tx buffer base address */
|
||||
#define ENDP1_TXADDR (0x98)
|
||||
|
||||
/* EP2 */
|
||||
/* Rx buffer base address */
|
||||
#define ENDP2_RXADDR (0xD8)
|
||||
|
||||
|
||||
/* ISTR events */
|
||||
/* IMR_MSK */
|
||||
/* mask defining which events has to be handled */
|
||||
/* by the device application software */
|
||||
#define IMR_MSK (CNTR_CTRM | CNTR_RESETM)
|
||||
|
||||
/* CTR service routines */
|
||||
/* associated to defined endpoints */
|
||||
//#define EP1_IN_Callback NOP_Process
|
||||
#define EP2_IN_Callback NOP_Process
|
||||
#define EP3_IN_Callback NOP_Process
|
||||
#define EP4_IN_Callback NOP_Process
|
||||
#define EP5_IN_Callback NOP_Process
|
||||
#define EP6_IN_Callback NOP_Process
|
||||
#define EP7_IN_Callback NOP_Process
|
||||
|
||||
|
||||
#define EP1_OUT_Callback NOP_Process
|
||||
//#define EP2_OUT_Callback NOP_Process
|
||||
#define EP3_OUT_Callback NOP_Process
|
||||
#define EP4_OUT_Callback NOP_Process
|
||||
#define EP5_OUT_Callback NOP_Process
|
||||
#define EP6_OUT_Callback NOP_Process
|
||||
#define EP7_OUT_Callback NOP_Process
|
||||
|
||||
#endif /* __USB_CONF_H */
|
||||
|
||||
/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/
|
||||
@@ -1,35 +0,0 @@
|
||||
/******************** (C) COPYRIGHT 2015 e-Design Co., Ltd. ********************
|
||||
File Name : USB_desc.h
|
||||
Version : STM32 USB Disk Ver 3.4 Author : MCD Application Team & bure
|
||||
*******************************************************************************/
|
||||
#ifndef __USB_DESC_H
|
||||
#define __USB_DESC_H
|
||||
|
||||
#ifdef STM32F30X
|
||||
#include "stm32f30x.h"
|
||||
#else
|
||||
#include "stm32f10x.h"
|
||||
#endif
|
||||
|
||||
#define MASS_SIZ_DEVICE_DESC 18
|
||||
#define MASS_SIZ_CONFIG_DESC 32
|
||||
|
||||
#define MASS_SIZ_STRING_LANGID 4
|
||||
#define MASS_SIZ_STRING_VENDOR 38
|
||||
#define MASS_SIZ_STRING_PRODUCT 38
|
||||
#define MASS_SIZ_STRING_SERIAL 26
|
||||
#define MASS_SIZ_STRING_INTERFACE 16
|
||||
|
||||
extern const u8 MASS_DeviceDescriptor[MASS_SIZ_DEVICE_DESC];
|
||||
extern const u8 MASS_ConfigDescriptor[MASS_SIZ_CONFIG_DESC];
|
||||
|
||||
extern const u8 MASS_StringLangID[MASS_SIZ_STRING_LANGID];
|
||||
extern const u8 MASS_StringVendor[MASS_SIZ_STRING_VENDOR];
|
||||
extern const u8 MASS_StringProduct[MASS_SIZ_STRING_PRODUCT];
|
||||
extern u8 MASS_StringSerial[MASS_SIZ_STRING_SERIAL];
|
||||
extern const u8 MASS_StringInterface[MASS_SIZ_STRING_INTERFACE];
|
||||
|
||||
#endif
|
||||
/********************************* END OF FILE ******************************/
|
||||
|
||||
|
||||
@@ -1,64 +0,0 @@
|
||||
/******************** (C) COPYRIGHT 2015 e-Design Co., Ltd. ********************
|
||||
File Name : USB_istr.h
|
||||
Version : STM32 USB Disk Ver 3.4 Author : MCD Application Team & bure
|
||||
*******************************************************************************/
|
||||
#ifndef __USB_ISTR_H
|
||||
#define __USB_ISTR_H
|
||||
|
||||
#include "usb_conf.h"
|
||||
|
||||
void CTR_HP(void);
|
||||
void USB_Istr(void);
|
||||
|
||||
/* function prototypes Automatically built defining related macros */
|
||||
|
||||
#ifdef CTR_CALLBACK
|
||||
void CTR_Callback(void);
|
||||
#endif
|
||||
|
||||
#ifdef DOVR_CALLBACK
|
||||
void DOVR_Callback(void);
|
||||
#endif
|
||||
|
||||
#ifdef ERR_CALLBACK
|
||||
void ERR_Callback(void);
|
||||
#endif
|
||||
|
||||
#ifdef WKUP_CALLBACK
|
||||
void WKUP_Callback(void);
|
||||
#endif
|
||||
|
||||
#ifdef SUSP_CALLBACK
|
||||
void SUSP_Callback(void);
|
||||
#endif
|
||||
|
||||
#ifdef RESET_CALLBACK
|
||||
void RESET_Callback(void);
|
||||
#endif
|
||||
|
||||
#ifdef SOF_CALLBACK
|
||||
void SOF_Callback(void);
|
||||
#endif
|
||||
|
||||
#ifdef ESOF_CALLBACK
|
||||
void ESOF_Callback(void);
|
||||
#endif
|
||||
|
||||
void EP1_IN_Callback(void);
|
||||
void EP2_IN_Callback(void);
|
||||
void EP3_IN_Callback(void);
|
||||
void EP4_IN_Callback(void);
|
||||
void EP5_IN_Callback(void);
|
||||
void EP6_IN_Callback(void);
|
||||
void EP7_IN_Callback(void);
|
||||
|
||||
void EP1_OUT_Callback(void);
|
||||
void EP2_OUT_Callback(void);
|
||||
void EP3_OUT_Callback(void);
|
||||
void EP4_OUT_Callback(void);
|
||||
void EP5_OUT_Callback(void);
|
||||
void EP6_OUT_Callback(void);
|
||||
void EP7_OUT_Callback(void);
|
||||
|
||||
#endif
|
||||
/********************************* END OF FILE ******************************/
|
||||
@@ -1,51 +0,0 @@
|
||||
/******************** (C) COPYRIGHT 2015 e-Design Co., Ltd. ********************
|
||||
File Name : USB_prop.h
|
||||
Version : STM32 USB Disk Ver 3.4 Author : MCD Application Team & bure
|
||||
*******************************************************************************/
|
||||
#ifndef __usb_prop_H
|
||||
#define __usb_prop_H
|
||||
|
||||
#include "usb_core.h"
|
||||
|
||||
#ifdef STM32F30X
|
||||
#include "stm32f30x.h"
|
||||
#elif STM32F10X_HD
|
||||
#include "stm32f10x.h"
|
||||
#endif
|
||||
|
||||
#define Mass_Storage_GetConfiguration NOP_Process
|
||||
/* #define Mass_Storage_SetConfiguration NOP_Process*/
|
||||
#define Mass_Storage_GetInterface NOP_Process
|
||||
#define Mass_Storage_SetInterface NOP_Process
|
||||
#define Mass_Storage_GetStatus NOP_Process
|
||||
/* #define Mass_Storage_ClearFeature NOP_Process*/
|
||||
#define Mass_Storage_SetEndPointFeature NOP_Process
|
||||
#define Mass_Storage_SetDeviceFeature NOP_Process
|
||||
/*#define Mass_Storage_SetDeviceAddress NOP_Process*/
|
||||
|
||||
/* MASS Storage Requests*/
|
||||
#define GET_MAX_LUN 0xFE
|
||||
#define MASS_STORAGE_RESET 0xFF
|
||||
#define LUN_DATA_LENGTH 1
|
||||
|
||||
extern u32 Max_Lun;
|
||||
|
||||
void MASS_init(void);
|
||||
void MASS_Reset(void);
|
||||
void Mass_Storage_SetConfiguration(void);
|
||||
void Mass_Storage_ClearFeature(void);
|
||||
void Mass_Storage_SetDeviceAddress (void);
|
||||
void MASS_Status_In (void);
|
||||
void MASS_Status_Out (void);
|
||||
RESULT MASS_Data_Setup(u8);
|
||||
RESULT MASS_NoData_Setup(u8);
|
||||
RESULT MASS_Get_Interface_Setting(u8 Interface, u8 AlternateSetting);
|
||||
u8 *MASS_GetDeviceDescriptor(u16 );
|
||||
u8 *MASS_GetConfigDescriptor(u16);
|
||||
u8 *MASS_GetStringDescriptor(u16);
|
||||
u8 *Get_Max_Lun(u16 Length);
|
||||
void Get_SerialNum(void);
|
||||
|
||||
#endif
|
||||
/********************************* END OF FILE ******************************/
|
||||
|
||||
@@ -1,42 +0,0 @@
|
||||
/******************** (C) COPYRIGHT 2015 e-Design Co., Ltd. ********************
|
||||
File Name : USB_pwr.h
|
||||
Version : STM32 USB Disk Ver 3.4 Author : MCD Application Team & bure
|
||||
*******************************************************************************/
|
||||
#ifndef __USB_PWR_H
|
||||
#define __USB_PWR_H
|
||||
|
||||
#include "usb_core.h"
|
||||
|
||||
typedef enum _RESUME_STATE
|
||||
{
|
||||
RESUME_EXTERNAL,
|
||||
RESUME_INTERNAL,
|
||||
RESUME_LATER,
|
||||
RESUME_WAIT,
|
||||
RESUME_START,
|
||||
RESUME_ON,
|
||||
RESUME_OFF,
|
||||
RESUME_ESOF
|
||||
} RESUME_STATE;
|
||||
|
||||
typedef enum _DEVICE_STATE
|
||||
{
|
||||
UNCONNECTED,
|
||||
ATTACHED,
|
||||
POWERED,
|
||||
SUSPENDED,
|
||||
ADDRESSED,
|
||||
CONFIGURED
|
||||
} DEVICE_STATE;
|
||||
|
||||
void Suspend(void);
|
||||
void Resume_Init(void);
|
||||
void Resume(RESUME_STATE eResumeSetVal);
|
||||
RESULT PowerOn(void);
|
||||
RESULT PowerOff(void);
|
||||
|
||||
extern vu32 bDeviceState; /* USB device status */
|
||||
extern vu8 fSuspendEnabled; /* true when suspend is possible */
|
||||
|
||||
#endif
|
||||
/********************************* END OF FILE ******************************/
|
||||
@@ -1,125 +0,0 @@
|
||||
/******************** (C) COPYRIGHT 2015 e-Design Co., Ltd. ********************
|
||||
File Name : USB_scsi.h
|
||||
Version : STM32 USB Disk Ver 3.4 Author : MCD Application Team & bure
|
||||
*******************************************************************************/
|
||||
#ifndef __USB_SCSI_H
|
||||
#define __USB_SCSI_H
|
||||
|
||||
#ifdef STM32F30X
|
||||
#include "stm32f30x.h"
|
||||
#else
|
||||
#include "stm32f10x.h"
|
||||
#endif
|
||||
|
||||
/* SCSI Commands */
|
||||
#define SCSI_FORMAT_UNIT 0x04
|
||||
#define SCSI_INQUIRY 0x12
|
||||
#define SCSI_MODE_SELECT6 0x15
|
||||
#define SCSI_MODE_SELECT10 0x55
|
||||
#define SCSI_MODE_SENSE6 0x1A
|
||||
#define SCSI_MODE_SENSE10 0x5A
|
||||
#define SCSI_ALLOW_MEDIUM_REMOVAL 0x1E
|
||||
#define SCSI_READ6 0x08
|
||||
#define SCSI_READ10 0x28
|
||||
#define SCSI_READ12 0xA8
|
||||
#define SCSI_READ16 0x88
|
||||
|
||||
#define SCSI_READ_CAPACITY10 0x25
|
||||
#define SCSI_READ_CAPACITY16 0x9E
|
||||
|
||||
#define SCSI_REQUEST_SENSE 0x03
|
||||
#define SCSI_START_STOP_UNIT 0x1B
|
||||
#define SCSI_TEST_UNIT_READY 0x00
|
||||
#define SCSI_WRITE6 0x0A
|
||||
#define SCSI_WRITE10 0x2A
|
||||
#define SCSI_WRITE12 0xAA
|
||||
#define SCSI_WRITE16 0x8A
|
||||
|
||||
#define SCSI_VERIFY10 0x2F
|
||||
#define SCSI_VERIFY12 0xAF
|
||||
#define SCSI_VERIFY16 0x8F
|
||||
|
||||
#define SCSI_SEND_DIAGNOSTIC 0x1D
|
||||
#define SCSI_READ_FORMAT_CAPACITIES 0x23
|
||||
|
||||
#define NO_SENSE 0
|
||||
#define RECOVERED_ERROR 1
|
||||
#define NOT_READY 2
|
||||
#define MEDIUM_ERROR 3
|
||||
#define HARDWARE_ERROR 4
|
||||
#define ILLEGAL_REQUEST 5
|
||||
#define UNIT_ATTENTION 6
|
||||
#define DATA_PROTECT 7
|
||||
#define BLANK_CHECK 8
|
||||
#define VENDOR_SPECIFIC 9
|
||||
#define COPY_ABORTED 10
|
||||
#define ABORTED_COMMAND 11
|
||||
#define VOLUME_OVERFLOW 13
|
||||
#define MISCOMPARE 14
|
||||
|
||||
|
||||
#define INVALID_COMMAND 0x20
|
||||
#define INVALID_FIELED_IN_COMMAND 0x24
|
||||
#define PARAMETER_LIST_LENGTH_ERROR 0x1A
|
||||
#define INVALID_FIELD_IN_PARAMETER_LIST 0x26
|
||||
#define ADDRESS_OUT_OF_RANGE 0x21
|
||||
#define MEDIUM_NOT_PRESENT 0x3A
|
||||
#define MEDIUM_HAVE_CHANGED 0x28
|
||||
|
||||
#define READ_FORMAT_CAPACITY_DATA_LEN 0x0C
|
||||
#define READ_CAPACITY10_DATA_LEN 0x08
|
||||
#define MODE_SENSE10_DATA_LEN 0x08
|
||||
#define MODE_SENSE6_DATA_LEN 0x04
|
||||
#define REQUEST_SENSE_DATA_LEN 0x12
|
||||
#define STANDARD_INQUIRY_DATA_LEN 0x24 // 0x24
|
||||
#define BLKVFY 0x04
|
||||
|
||||
extern u8 Page00_Inquiry_Data[];
|
||||
extern u8 Standard_Inquiry_Data[];
|
||||
extern u8 Mode_Sense6_data[];
|
||||
extern u8 Mode_Sense10_data[];
|
||||
extern u8 Scsi_Sense_Data[];
|
||||
extern u8 ReadCapacity10_Data[];
|
||||
|
||||
extern u8 Bot_State;
|
||||
|
||||
void SCSI_Inquiry_Cmd(void);
|
||||
void SCSI_ReadFormatCapacity_Cmd(void);
|
||||
void SCSI_ReadCapacity10_Cmd(void);
|
||||
void SCSI_RequestSense_Cmd (void);
|
||||
void SCSI_Start_Stop_Unit_Cmd(void);
|
||||
void SCSI_ModeSense6_Cmd (void);
|
||||
void SCSI_ModeSense10_Cmd (void);
|
||||
void SCSI_Write10_Cmd(u32 LBA , u32 BlockNbr);
|
||||
void SCSI_Read10_Cmd(u32 LBA , u32 BlockNbr);
|
||||
void SCSI_Verify10_Cmd(void);
|
||||
|
||||
void SCSI_Invalid_Cmd(void);
|
||||
void SCSI_Valid_Cmd(void);
|
||||
u8 SCSI_Address_Management(u8 Cmd , u32 LBA , u32 BlockNbr);
|
||||
|
||||
void Set_Scsi_Sense_Data(u8 Sens_Key, u8 Asc);
|
||||
void SCSI_TestUnitReady_Cmd (void);
|
||||
void SCSI_Format_Cmd (void);
|
||||
|
||||
#define SCSI_Prevent_Removal_Cmd SCSI_Valid_Cmd
|
||||
|
||||
// Invalid (Unsupported) commands
|
||||
#define SCSI_READ_CAPACITY16_Cmd SCSI_Invalid_Cmd
|
||||
|
||||
//#define SCSI_FormatUnit_Cmd SCSI_Invalid_Cmd
|
||||
#define SCSI_Write6_Cmd SCSI_Invalid_Cmd
|
||||
#define SCSI_Write16_Cmd SCSI_Invalid_Cmd
|
||||
#define SCSI_Write12_Cmd SCSI_Invalid_Cmd
|
||||
#define SCSI_Read6_Cmd SCSI_Invalid_Cmd
|
||||
#define SCSI_Read12_Cmd SCSI_Invalid_Cmd
|
||||
#define SCSI_Read16_Cmd SCSI_Invalid_Cmd
|
||||
#define SCSI_Send_Diagnostic_Cmd SCSI_Invalid_Cmd
|
||||
#define SCSI_Mode_Select6_Cmd SCSI_Invalid_Cmd
|
||||
#define SCSI_Mode_Select10_Cmd SCSI_Invalid_Cmd
|
||||
#define SCSI_Verify12_Cmd SCSI_Invalid_Cmd
|
||||
#define SCSI_Verify16_Cmd SCSI_Invalid_Cmd
|
||||
|
||||
#endif
|
||||
/********************************* END OF FILE ******************************/
|
||||
|
||||
@@ -1,284 +0,0 @@
|
||||
/********************* (C) COPYRIGHT 2015 e-Design Co.,Ltd. ********************
|
||||
File Name : 2FAT12.c
|
||||
Version : S100 APP Ver 2.11
|
||||
Description:
|
||||
Author : bure & Celery
|
||||
Data: 2015/08/03
|
||||
History:
|
||||
2016/09/13 Ben V. Brown -> English comments and cleaning up
|
||||
2015/08/03
|
||||
*******************************************************************************/
|
||||
#include <string.h>
|
||||
#include "FAT12.h"
|
||||
#include "Bios.h"
|
||||
|
||||
#define FAT_LEN 0x1800
|
||||
#define FAT1_BASE 0x00001000 // FAT1
|
||||
#define FAT2_BASE 0x00002800 // FAT2
|
||||
#define ROOT_BASE 0x00004000 //
|
||||
#define FILE_BASE 0x00008000 //
|
||||
#define SEC_LEN 512 //length of a sector -> 512 Bytes
|
||||
#define FAT1_SEC 0x0C // FAT1 Sector
|
||||
#define FAT2_SEC 0x0C // FAT2 Sector
|
||||
|
||||
#define OK 0 //Error codes
|
||||
#define SEC_ERR 1 //
|
||||
#define FAT_ERR 2 //
|
||||
#define OVER 3 //
|
||||
#define NEW 4 //
|
||||
#define END 0xFFF //
|
||||
|
||||
#define OW 0 //
|
||||
#define RW 1 //
|
||||
|
||||
/*******************************************************************************
|
||||
Function: NextCluster
|
||||
Description:
|
||||
Input:
|
||||
*******************************************************************************/
|
||||
u8 NextCluster(u16* pCluster) {
|
||||
u16 FatNum;
|
||||
u32 Addr = FAT1_BASE + (*pCluster + *pCluster / 2);
|
||||
|
||||
*(pCluster + 1) = *pCluster; // <20><><EFBFBD><EFBFBD>ǰһ<C7B0><D2BB><EFBFBD>غ<EFBFBD>
|
||||
// *(pCluster+1)= 0;
|
||||
if ((*pCluster >= END) || (*pCluster < 2))
|
||||
return OK;
|
||||
if (ReadDiskData((u8*) &FatNum, Addr, 2) != OK)
|
||||
return SEC_ERR;
|
||||
*pCluster = (*pCluster & 1) ? (FatNum >> 4) : (FatNum & 0x0FFF); // ָ<><D6B8><EFBFBD><EFBFBD>һ<EFBFBD><D2BB><EFBFBD>غ<EFBFBD>
|
||||
return OK;
|
||||
}
|
||||
/*******************************************************************************
|
||||
Function: ReadFileSec
|
||||
Description:
|
||||
Input:
|
||||
*******************************************************************************/
|
||||
u8 ReadFileSec(u8* pBuffer, u16* pCluster) {
|
||||
u32 ReadAddr = FILE_BASE + SEC_LEN * (*pCluster - 2);
|
||||
//This code appears to read the data in two chunks of 256 bytes...
|
||||
if (ReadDiskData(pBuffer, ReadAddr, 256) != OK)
|
||||
return SEC_ERR; //
|
||||
pBuffer += 256;
|
||||
ReadAddr += 256;
|
||||
if (ReadDiskData(pBuffer, ReadAddr, 256) != OK)
|
||||
return SEC_ERR; // Failed to read the sector
|
||||
if (NextCluster(pCluster) != 0)
|
||||
return FAT_ERR; //
|
||||
return OK;
|
||||
}
|
||||
/*******************************************************************************
|
||||
Function: ProgFileSec
|
||||
Description:
|
||||
Input:
|
||||
*******************************************************************************/
|
||||
u8 ProgFileSec(u8* pBuffer, u16* pCluster) {
|
||||
u16 Tmp;
|
||||
u32 ProgAddr = FILE_BASE + SEC_LEN * (*pCluster - 2);
|
||||
|
||||
if (ProgDiskPage(pBuffer, ProgAddr) != OK)
|
||||
return SEC_ERR; //
|
||||
pBuffer += 256;
|
||||
ProgAddr += 256;
|
||||
if (ProgDiskPage(pBuffer, ProgAddr) != OK)
|
||||
return SEC_ERR; //
|
||||
Tmp = *pCluster;
|
||||
switch (Tmp) {
|
||||
case 0:
|
||||
case 1:
|
||||
if (SeekBlank(pBuffer, pCluster) != OK)
|
||||
return OVER;
|
||||
if (SetCluster(pBuffer, pCluster) != OK)
|
||||
return SEC_ERR;
|
||||
*(pCluster + 1) = Tmp;
|
||||
return OK;
|
||||
case END:
|
||||
default:
|
||||
if (NextCluster(pCluster) != OK)
|
||||
return FAT_ERR;
|
||||
return OK;
|
||||
}
|
||||
}
|
||||
/*******************************************************************************
|
||||
Function: SeekBlank
|
||||
Description:
|
||||
Input:
|
||||
*******************************************************************************/
|
||||
u8 SeekBlank(u8* pBuffer, u16* pCluster) {
|
||||
u16 Offset, Tmp, i, n = 0;
|
||||
u32 SecAddr;
|
||||
|
||||
for (i = 0; i < 4096; i++) {
|
||||
Offset = i + i / 2;
|
||||
if ((Offset % 256) == 0) {
|
||||
SecAddr = FAT1_BASE + (Offset & (~0xFF));
|
||||
if (ReadDiskData(pBuffer, SecAddr, 258) != 0)
|
||||
return SEC_ERR;
|
||||
}
|
||||
Offset %= 256;
|
||||
Tmp = pBuffer[Offset] + (pBuffer[Offset + 1] << 8);
|
||||
Tmp = (i & 1) ? (Tmp >> 4) : (Tmp & 0xFFF);
|
||||
if (Tmp == 0) {
|
||||
*pCluster++ = i;
|
||||
n++;
|
||||
if (n > 1)
|
||||
return OK;
|
||||
}
|
||||
}
|
||||
*(pCluster + 1) = 0xFFF;
|
||||
return OK;
|
||||
}
|
||||
/*******************************************************************************
|
||||
Function:
|
||||
Description:
|
||||
Input:
|
||||
*******************************************************************************/
|
||||
u8 SetCluster(u8* pBuffer, u16* pCluster) {
|
||||
u16 Offset, Tmp, i, k;
|
||||
u32 SecAddr;
|
||||
|
||||
i = *pCluster; // <20><>ȡԭ<C8A1><D4AD>ǰ<EFBFBD>غ<EFBFBD>
|
||||
k = *(pCluster + 1); // <20><>ȡ<EFBFBD><C8A1>һ<EFBFBD>غ<EFBFBD>
|
||||
*pCluster = k;
|
||||
Offset = i + i / 2;
|
||||
SecAddr = FAT1_BASE + (Offset & (~0xFF));
|
||||
Tmp = Offset & 0xFF;
|
||||
if (ReadDiskData(pBuffer, SecAddr, 256) != 0)
|
||||
return SEC_ERR;
|
||||
if (i & 1)
|
||||
pBuffer[Tmp] = ((k << 4) & 0xF0) + (pBuffer[Tmp] & 0x0F);
|
||||
else
|
||||
pBuffer[Tmp] = k;
|
||||
if (Tmp++ < 256) {
|
||||
if (i & 1)
|
||||
pBuffer[Tmp] = k >> 4;
|
||||
else
|
||||
pBuffer[Tmp] = ((k >> 8) & 0x0F) + (pBuffer[Tmp] & 0xF0);
|
||||
if (ProgDiskPage(pBuffer, SecAddr) != 0)
|
||||
return SEC_ERR;
|
||||
} else {
|
||||
if (ProgDiskPage(pBuffer, SecAddr) != 0)
|
||||
return SEC_ERR;
|
||||
SecAddr += 256;
|
||||
if (ReadDiskData(pBuffer, SecAddr, 256) != 0)
|
||||
return SEC_ERR;
|
||||
if (i & 1)
|
||||
pBuffer[0] = k >> 4;
|
||||
else
|
||||
pBuffer[0] = ((k >> 8) & 0x0F) + (pBuffer[0] & 0xF0);
|
||||
if (ProgDiskPage(pBuffer, SecAddr) != 0)
|
||||
return SEC_ERR;
|
||||
}
|
||||
return OK;
|
||||
}
|
||||
/*******************************************************************************
|
||||
Function:
|
||||
Description:
|
||||
Input:
|
||||
*******************************************************************************/
|
||||
u8 FAT_SearchFile(u8* pBuffer, u8* pFileName, u16* pCluster, u32* pDirAddr,
|
||||
u32* flag) {
|
||||
u16 i, n;
|
||||
|
||||
*pCluster = 0;
|
||||
for (*pDirAddr = ROOT_BASE; *pDirAddr < FILE_BASE;) {
|
||||
if (ReadDiskData(pBuffer, *pDirAddr, 256) != OK)
|
||||
return SEC_ERR;
|
||||
for (n = 0; n < 256; n += 32) {
|
||||
for (i = 0; i < 4; i++) {
|
||||
if (pBuffer[n + i] != 0) {
|
||||
if (pBuffer[n + i] != pFileName[i])
|
||||
break;
|
||||
if (i == 3) { // <20>ҵ<EFBFBD><D2B5>ļ<EFBFBD><C4BC><EFBFBD>
|
||||
*pCluster = *(u16*) (pBuffer + n + 0x1A); // <20>ļ<EFBFBD><C4BC><EFBFBD>һ<EFBFBD><D2BB><EFBFBD>غ<EFBFBD>
|
||||
return OK;
|
||||
}
|
||||
} else
|
||||
return NEW; // <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD>һ<EFBFBD><D2BB><EFBFBD>հ<EFBFBD>Ŀ¼<C4BF><C2BC><EFBFBD>
|
||||
}
|
||||
*pDirAddr += 32;
|
||||
}
|
||||
}
|
||||
return OVER;
|
||||
}
|
||||
|
||||
/*******************************************************************************
|
||||
Function:OpenFileRd
|
||||
Description: Opens a file for reading from
|
||||
Input:
|
||||
*******************************************************************************/
|
||||
u8 OpenFileRd(u8* pBuffer, u8* pFileName, u16* pCluster, u32* pDirAddr) {
|
||||
u16 i, n;
|
||||
|
||||
*pCluster = 0;
|
||||
for (*pDirAddr = ROOT_BASE; *pDirAddr < FILE_BASE;) {
|
||||
if (ReadDiskData(pBuffer, *pDirAddr, 256) != OK)
|
||||
return SEC_ERR;
|
||||
for (n = 0; n < 256; n += 32) {
|
||||
for (i = 0; i < 11; i++) {
|
||||
if (pBuffer[n + i] != 0) {
|
||||
if (pBuffer[n + i] != pFileName[i])
|
||||
break;
|
||||
if (i == 10) { // <20>ҵ<EFBFBD><D2B5>ļ<EFBFBD><C4BC><EFBFBD>
|
||||
*pCluster = *(u16*) (pBuffer + n + 0x1A); // <20>ļ<EFBFBD><C4BC><EFBFBD>һ<EFBFBD><D2BB><EFBFBD>غ<EFBFBD>
|
||||
return OK;
|
||||
}
|
||||
} else
|
||||
return NEW; // <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD>һ<EFBFBD><D2BB><EFBFBD>հ<EFBFBD>Ŀ¼<C4BF><C2BC><EFBFBD>
|
||||
}
|
||||
*pDirAddr += 32;
|
||||
}
|
||||
}
|
||||
return OVER;
|
||||
}
|
||||
/*******************************************************************************
|
||||
Function: OpenFileWr
|
||||
Description: Opens a file for writing to
|
||||
Input:
|
||||
*******************************************************************************/
|
||||
u8 OpenFileWr(u8* pBuffer, u8* pFileName, u16* pCluster, u32* pDirAddr) {
|
||||
u16 i, n;
|
||||
|
||||
i = OpenFileRd(pBuffer, pFileName, pCluster, pDirAddr);
|
||||
if (i != NEW)
|
||||
return i;
|
||||
else { // <20><>ǰ<EFBFBD><C7B0>Ϊ<EFBFBD>հ<EFBFBD>Ŀ¼<C4BF><C2BC>
|
||||
if (SeekBlank(pBuffer, pCluster) != OK)
|
||||
return OVER; // <20><>FAT<41><54><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
|
||||
n = *pDirAddr & 0xFF; // nΪ<6E><CEAA>ǰҳĿ¼<C4BF><C2BC>
|
||||
if (ReadDiskData(pBuffer, (*pDirAddr) - n, 256) != OK)
|
||||
return SEC_ERR;
|
||||
for (i = 0; i < 11; i++)
|
||||
pBuffer[n + i] = pFileName[i]; // <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ŀ¼<C4BF><C2BC>
|
||||
*(u16*) (pBuffer + n + 0x1A) = *pCluster;
|
||||
if (ProgDiskPage(pBuffer, (*pDirAddr) - n) != OK)
|
||||
return SEC_ERR;
|
||||
return OK;
|
||||
}
|
||||
}
|
||||
/*******************************************************************************
|
||||
Function: CloseFile
|
||||
Description: Closes a file that was previously opened
|
||||
Input:
|
||||
*******************************************************************************/
|
||||
u8 CloseFile(u8* pBuffer, u32 Lenght, u16* pCluster, u32* pDirAddr) {
|
||||
u16 n;
|
||||
|
||||
// *pCluster = *(pCluster+1); // <20><>ȡǰһ<C7B0><D2BB><EFBFBD>غ<EFBFBD>
|
||||
*(pCluster + 1) = 0xFFF;
|
||||
SetCluster(pBuffer, pCluster);
|
||||
if (ReadDiskData(pBuffer, (*pDirAddr & (~0xFF)), 256) != OK)
|
||||
return SEC_ERR;
|
||||
*(u8*) (pBuffer + (*pDirAddr & 0xFF) + 0x0B) = 0x20;
|
||||
*(u32*) (pBuffer + (*pDirAddr & 0xFF) + 0x1C) = Lenght;
|
||||
if (ProgDiskPage(pBuffer, (*pDirAddr & (~0xFF))) != OK)
|
||||
return SEC_ERR;
|
||||
for (n = 0; n < FAT1_SEC; n++) {
|
||||
if (ReadDiskData(pBuffer, FAT1_BASE + n * 256, 256) != OK)
|
||||
return SEC_ERR;
|
||||
if (ProgDiskPage(pBuffer, FAT2_BASE + n * 256) != OK)
|
||||
return SEC_ERR;
|
||||
}
|
||||
return OK;
|
||||
}
|
||||
/******************************** END OF FILE *********************************/
|
||||
120
workspace/ts100/src/Analog.c
Normal file
120
workspace/ts100/src/Analog.c
Normal file
@@ -0,0 +1,120 @@
|
||||
/*
|
||||
* Analog.c
|
||||
*
|
||||
* Created on: 20 Sep 2016
|
||||
* Author: ralim
|
||||
* Contains the functions related to reading and scaling the adc pins
|
||||
* This is used for temperature and battery voltage sense
|
||||
*/
|
||||
#include "Analog.h"
|
||||
|
||||
uint16_t readDCVoltage() {
|
||||
uint16_t reading = 0;
|
||||
for (u8 i = 0; i < 10; i++) {
|
||||
reading += ADC_GetConversionValue(ADC2);
|
||||
}
|
||||
reading /= 144; //take the average and convert to X10 voltage
|
||||
return reading; //return the read voltage
|
||||
}
|
||||
|
||||
//This reads the thermocouple in the tip
|
||||
//This allows us to read it in X10 mode
|
||||
//Returns temperature in C X10 mode
|
||||
int16_t readTipTemp() {
|
||||
static uint32_t rollingAverage[4];
|
||||
static uint8_t rIndex = 0;
|
||||
|
||||
/*The head has a thermocouple inline with the heater
|
||||
This is read by turning off the heater
|
||||
Then read the output of the op-amp that is connected across the connections
|
||||
*/
|
||||
uint32_t ad_sum = 0;
|
||||
uint32_t max = 0, min;
|
||||
uint32_t ad_value, avg_data;
|
||||
uint32_t timer = getIronTimer();
|
||||
setIronTimer(0); //set the remaining time to zero
|
||||
HEAT_OFF(); //heater must be off
|
||||
delayMs(5); //wait for the heater to time out
|
||||
uint8_t gMeas_cnt = 9; //how many measurements to make
|
||||
max = ad_sum = min = Get_ADC1Value(0);
|
||||
|
||||
while (gMeas_cnt > 0) {
|
||||
ad_value = Get_ADC1Value(0);
|
||||
ad_sum += ad_value;
|
||||
if (ad_value > max)
|
||||
max = ad_value;
|
||||
if (ad_value < min)
|
||||
min = ad_value;
|
||||
|
||||
gMeas_cnt--;
|
||||
}
|
||||
setIronTimer(timer);
|
||||
ad_sum = ad_sum - max - min; //remove the two outliers
|
||||
avg_data = ad_sum / 8; //take the average
|
||||
rollingAverage[rIndex] = avg_data;
|
||||
rIndex = (rIndex + 1) % 4;
|
||||
return (rollingAverage[0] + rollingAverage[1] + rollingAverage[2]
|
||||
+ rollingAverage[3]) / 4; //get the average
|
||||
|
||||
}
|
||||
|
||||
/*******************************************************************************
|
||||
Function:
|
||||
Description:Reads the temperature of the on board temp sensor for calibration
|
||||
http://www.analog.com/media/en/technical-documentation/data-sheets/TMP35_36_37.pdf
|
||||
Output: The onboardTemp in C X 10
|
||||
*******************************************************************************/
|
||||
int readSensorTemp(void) {
|
||||
static uint32_t rollingAverage[4];
|
||||
static uint8_t rIndex = 0;
|
||||
u32 ad_sum = 0;
|
||||
u32 max, min;
|
||||
u32 ad_value, avg_data, slide_data;
|
||||
|
||||
u8 gMeas_cnt = 9;
|
||||
ad_sum = min = max = Get_ADC1Value(1);
|
||||
while (gMeas_cnt > 0) {
|
||||
ad_value = Get_ADC1Value(1);
|
||||
ad_sum += ad_value;
|
||||
if (ad_value > max)
|
||||
max = ad_value;
|
||||
if (ad_value < min)
|
||||
min = ad_value;
|
||||
gMeas_cnt--;
|
||||
}
|
||||
ad_sum = ad_sum - max - min;
|
||||
avg_data = ad_sum / 8;
|
||||
//^ Removes the two outliers from the data spread
|
||||
|
||||
rollingAverage[rIndex] = avg_data; //store this result
|
||||
rIndex = (rIndex + 1) % 4; //move the index
|
||||
slide_data = (rollingAverage[0] + rollingAverage[1] + rollingAverage[2]
|
||||
+ rollingAverage[3]) / 4; //get the average
|
||||
return (250 + (3300 * slide_data / 4096) - 750);
|
||||
//(25 + ((10*(33*gSlide_data)/4096)-75));
|
||||
//^ Convert the reading to C
|
||||
|
||||
}
|
||||
|
||||
volatile uint16_t ADC1ConvertedValue[2];
|
||||
//returns the latest reading from ADC1 that was buffered using DMA
|
||||
uint16_t Get_ADC1Value(uint8_t i) {
|
||||
return ADC1ConvertedValue[i];
|
||||
}
|
||||
//This returns the calibrated temperature reading of the iron temp
|
||||
uint16_t readIronTemp(uint16_t calibration_temp, uint8_t read) {
|
||||
static uint16_t calTemp = 0;
|
||||
static uint16_t lastVal = 0;
|
||||
|
||||
if (calibration_temp != 0)
|
||||
calTemp = calibration_temp;
|
||||
|
||||
if (read) {
|
||||
lastVal = (readTipTemp() * 1000 + 806 * readSensorTemp()
|
||||
- calTemp * 1000) / 806;
|
||||
|
||||
}
|
||||
|
||||
return lastVal;
|
||||
|
||||
}
|
||||
@@ -1,110 +1,17 @@
|
||||
/********************* (C) COPYRIGHT 2015 e-Design Co.,Ltd. **********************
|
||||
File Name : Bios.c
|
||||
Version : S100 APP Ver 2.11
|
||||
Description:
|
||||
Author : Celery
|
||||
Data: 2015/07/07
|
||||
History:
|
||||
2015/07/07 ͳһ<CDB3><D2BB><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
|
||||
*******************************************************************************/
|
||||
|
||||
#include <Hardware.h>
|
||||
#include <usb_lib.h>
|
||||
/*
|
||||
* Setup all the basic hardware in the system and handle timer3 tick
|
||||
*/
|
||||
#include "APP_Version.h"
|
||||
#include "Bios.h"
|
||||
#include "I2C.h"
|
||||
#include "CTRL.h"
|
||||
|
||||
/******************************************************************************/
|
||||
#define ADC1_DR_Address ((u32)0x4001244C)
|
||||
volatile uint32_t gHeat_cnt = 0;
|
||||
|
||||
vu32 gTimeOut, gMs_timeout;
|
||||
volatile u32 gTime[8]; //times for timer storage
|
||||
//^-- gTime is automatically decremented on each firing of timer 2 if >0
|
||||
vu16 ADC1ConvertedValue[2];
|
||||
vu32 gHeat_cnt = 0;
|
||||
|
||||
/*******************************************************************************
|
||||
<20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD>: Get_AdcValue
|
||||
<20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>:<3A><>ȡADC ת<><D7AA><EFBFBD><EFBFBD>Ķ<EFBFBD><C4B6><EFBFBD>
|
||||
<20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>:ת<><D7AA><EFBFBD><EFBFBD><EFBFBD>AD
|
||||
<20><><EFBFBD>ز<EFBFBD><D8B2><EFBFBD>:NULL
|
||||
*******************************************************************************/
|
||||
u16 Get_AdcValue(u8 i) {
|
||||
return ADC1ConvertedValue[i];
|
||||
}
|
||||
/*******************************************************************************
|
||||
<20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD>: Set_HeatingTime
|
||||
<20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>:<3A><><EFBFBD>ü<EFBFBD><C3BC><EFBFBD>ʱ<EFBFBD><CAB1>
|
||||
<20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>:heating_time <20><><EFBFBD><EFBFBD>ʱ<EFBFBD><CAB1>
|
||||
<20><><EFBFBD>ز<EFBFBD><D8B2><EFBFBD>:NULL
|
||||
*******************************************************************************/
|
||||
void Set_HeatingTime(u32 heating_time) {
|
||||
gHeat_cnt = heating_time;
|
||||
}
|
||||
/*******************************************************************************
|
||||
<20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD>: Get_HeatingTime
|
||||
<20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>:<3A><>ȡ<EFBFBD><C8A1><EFBFBD><EFBFBD>ʱ<EFBFBD><CAB1>
|
||||
<20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>:NULL
|
||||
<20><><EFBFBD>ز<EFBFBD><D8B2><EFBFBD>:<3A><><EFBFBD><EFBFBD>ʱ<EFBFBD><CAB1>
|
||||
*******************************************************************************/
|
||||
u32 Get_HeatingTime(void) {
|
||||
return gHeat_cnt;
|
||||
}
|
||||
/*******************************************************************************
|
||||
Function:
|
||||
Description: Init the global count down timers
|
||||
*******************************************************************************/
|
||||
void Init_Gtime(void) {
|
||||
u8 i;
|
||||
|
||||
for (i = 0; i < 8; i++)
|
||||
gTime[i] = 0;
|
||||
}
|
||||
|
||||
/*******************************************************************************
|
||||
<20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD>: Delay_Ms
|
||||
<20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>:<3A><>ʱ<EFBFBD><CAB1><EFBFBD><EFBFBD>
|
||||
<20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>:<3A><>ʱ<EFBFBD>ȴ<EFBFBD><C8B4>ĺ<EFBFBD><C4BA><EFBFBD><EFBFBD><EFBFBD>ֵ
|
||||
<20><><EFBFBD>ز<EFBFBD><D8B2><EFBFBD>:NULL
|
||||
*******************************************************************************/
|
||||
void Delay_Ms(u32 ms) {
|
||||
gMs_timeout = ms * 20;
|
||||
while (gMs_timeout)
|
||||
; // {if(Scan_key()!=0)break;}
|
||||
}
|
||||
/*******************************************************************************
|
||||
<20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD>: Delay_HalfMs
|
||||
<20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>:ÿ<><C3BF>λΪ0.5<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ʱ<EFBFBD><EFBFBD><EFBFBD><EFBFBD>
|
||||
<20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>:<3A><>ʱ<EFBFBD>ȴ<EFBFBD><C8B4><EFBFBD>0.5<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
|
||||
<20><><EFBFBD>ز<EFBFBD><D8B2><EFBFBD>:NULL
|
||||
*******************************************************************************/
|
||||
void Delay_HalfMs(u32 ms) {
|
||||
gMs_timeout = ms * 10;
|
||||
while (gMs_timeout)
|
||||
; // {if(Scan_key()!=0)break;}
|
||||
}
|
||||
|
||||
/*******************************************************************************
|
||||
Function: USB_Port
|
||||
Description: Enables or disables the usb pins
|
||||
Input: state == ENABLE or DISABLE
|
||||
*******************************************************************************/
|
||||
void USB_Port(u8 state) {
|
||||
USB_DN_LOW();
|
||||
USB_DP_LOW();
|
||||
if (state == DISABLE) {
|
||||
USB_DN_OUT();
|
||||
USB_DP_OUT();
|
||||
} else {
|
||||
USB_DN_EN();
|
||||
USB_DP_EN();
|
||||
}
|
||||
}
|
||||
/*******************************************************************************
|
||||
Function:RCC_Config
|
||||
Description:Setup the system clocks to use internal HSE to run the system at 48Mhz
|
||||
*******************************************************************************/
|
||||
/*
|
||||
* Setup system clocks to run off internal oscillator at 48Mhz
|
||||
*/
|
||||
void RCC_Config(void) {
|
||||
RCC_DeInit();
|
||||
FLASH_PrefetchBufferCmd(FLASH_PrefetchBuffer_Enable);
|
||||
@@ -123,37 +30,33 @@ void RCC_Config(void) {
|
||||
|
||||
RCC_AHBPeriphClockCmd(
|
||||
RCC_AHBPeriph_SRAM | RCC_AHBPeriph_DMA1 | RCC_AHBPeriph_DMA2 |
|
||||
RCC_AHBPeriph_FLITF, // Enable DMA1 clock ???
|
||||
ENABLE);
|
||||
RCC_AHBPeriph_FLITF, ENABLE);
|
||||
RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA | RCC_APB2Periph_GPIOB |
|
||||
RCC_APB2Periph_ADC1 | RCC_APB2Periph_ADC2, //| RCC_APB2Periph_ADC3, //RCC_APB2Periph_TIM1,
|
||||
ENABLE);
|
||||
RCC_APB2Periph_ADC1 | RCC_APB2Periph_ADC2, ENABLE);
|
||||
RCC_APB1PeriphClockCmd(RCC_APB1Periph_TIM2 | RCC_APB1Periph_TIM3, ENABLE);
|
||||
|
||||
RCC_USBCLKConfig(RCC_USBCLKSource_PLLCLK_Div1); // USBCLK = 48MHz
|
||||
}
|
||||
/*******************************************************************************
|
||||
Function: NVIC_Config
|
||||
Description: Configures the NVIC table in the hardware
|
||||
Input: (tab_offset) the table offset for the NVIC
|
||||
*******************************************************************************/
|
||||
void NVIC_Config(u16 tab_offset) {
|
||||
NVIC_InitTypeDef NVIC_InitStructure;
|
||||
|
||||
RCC_ClocksTypeDef RCC_Clocks;
|
||||
RCC_GetClocksFreq(&RCC_Clocks);
|
||||
SysTick_Config(RCC_Clocks.HCLK_Frequency / 1000); //Enable the systick timer at 1ms
|
||||
}
|
||||
/*
|
||||
* Shift the NVIC (Interrupt table) location relative to flash start
|
||||
*/
|
||||
void NVIC_Config(u16 tab_offset) {
|
||||
NVIC_SetVectorTable(NVIC_VectTab_FLASH, tab_offset);
|
||||
NVIC_PriorityGroupConfig(NVIC_PriorityGroup_2);
|
||||
NVIC_InitStructure.NVIC_IRQChannel = USB_LP_CAN1_RX0_IRQn;
|
||||
NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 2;
|
||||
NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0;
|
||||
NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
|
||||
NVIC_Init(&NVIC_InitStructure);
|
||||
}
|
||||
/*******************************************************************************
|
||||
Function:GPIO_Config
|
||||
Description: Configures all the GPIO into required states
|
||||
*******************************************************************************/
|
||||
/*
|
||||
* Setup the GPIO
|
||||
*/
|
||||
void GPIO_Config(void) {
|
||||
GPIO_InitTypeDef GPIO_InitStructure;
|
||||
RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOB | RCC_APB2Periph_AFIO, ENABLE); // GPIOB & AFIO
|
||||
|
||||
GPIO_PinRemapConfig(GPIO_Remap_SWJ_NoJTRST, ENABLE);
|
||||
GPIO_PinRemapConfig(GPIO_Remap_SWJ_JTAGDisable, ENABLE);
|
||||
|
||||
GPIOA_OUTPUT()
|
||||
;
|
||||
@@ -169,44 +72,49 @@ void GPIO_Config(void) {
|
||||
GPIOB_H_DEF()
|
||||
;
|
||||
|
||||
//------ PA7 TMP36 Analog input ----------------------------------------//
|
||||
//------ PA7 TMP36 Analog input ----------------------------------------//
|
||||
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_7;
|
||||
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AIN;
|
||||
GPIO_Init(GPIOA, &GPIO_InitStructure);
|
||||
|
||||
//------ OLED_RST_PIN(PB9) ------------------------------------------------------------//
|
||||
//------ OLED_RST_PIN(PB9) ---------------------------------------------//
|
||||
GPIO_InitStructure.GPIO_Pin = OLED_RST_PIN;
|
||||
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
|
||||
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP;
|
||||
GPIO_Init(GPIOB, &GPIO_InitStructure);
|
||||
GPIO_Init(GPIOA, &GPIO_InitStructure);
|
||||
|
||||
//------- Heat_Pin - Iron enable output PB4--------------------------------------------------------//
|
||||
GPIO_PinRemapConfig(GPIO_Remap_SWJ_NoJTRST, ENABLE); //Disable PB4=JNTRST
|
||||
//------- Heat_Pin - Iron enable output PB4-----------------------------//
|
||||
|
||||
GPIO_InitStructure.GPIO_Pin = HEAT_PIN;
|
||||
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
|
||||
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP;
|
||||
GPIO_Init(GPIOB, &GPIO_InitStructure);
|
||||
|
||||
//------ PB0 Iron temp input---------------------------------------//
|
||||
//----------- PB0 Iron temp input---------------------------------------//
|
||||
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0;
|
||||
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AIN;
|
||||
GPIO_Init(GPIOB, &GPIO_InitStructure);
|
||||
|
||||
//---------- INPUT Voltage Detection Pin VB PB1(Ai9) ---------------------------------------//
|
||||
//---------- INPUT Voltage Detection Pin VB PB1(Ai9) -------------------//
|
||||
GPIO_InitStructure.GPIO_Pin = VB_PIN;
|
||||
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AIN;
|
||||
GPIO_Init(GPIOB, &GPIO_InitStructure);
|
||||
|
||||
//-------- K1 = PA9, K2 = PA6 ----------------------------------------------------------//
|
||||
//-------- K1 = PA9, K2 = PA6 ------------------------------------------//
|
||||
GPIO_InitStructure.GPIO_Pin = KEY1_PIN | KEY2_PIN;
|
||||
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IPU;
|
||||
GPIO_Init(GPIOA, &GPIO_InitStructure);
|
||||
|
||||
//--------INT 1 == PB5 -------------------------------------------------//
|
||||
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_5;
|
||||
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IPU;//pullup just in case something resets the accel
|
||||
GPIO_Init(GPIOB, &GPIO_InitStructure);
|
||||
|
||||
}
|
||||
/*******************************************************************************
|
||||
Function: Adc_Init
|
||||
Description:Enable the ADC's and setup the DMA as well to automatically read them to system ram.
|
||||
*******************************************************************************/
|
||||
/*
|
||||
* Init the ADC's
|
||||
* Setup ADC1 to read via DMA to device ram automatically
|
||||
*/
|
||||
void Adc_Init(void) {
|
||||
u32 timeout = 10 * 0x1000;
|
||||
ADC_InitTypeDef ADC_InitStructure;
|
||||
@@ -220,7 +128,8 @@ void Adc_Init(void) {
|
||||
DMA_InitStructure.DMA_BufferSize = 2;
|
||||
DMA_InitStructure.DMA_PeripheralInc = DMA_PeripheralInc_Disable;
|
||||
DMA_InitStructure.DMA_MemoryInc = DMA_MemoryInc_Enable;
|
||||
DMA_InitStructure.DMA_PeripheralDataSize = DMA_PeripheralDataSize_HalfWord;
|
||||
DMA_InitStructure.DMA_PeripheralDataSize =
|
||||
DMA_PeripheralDataSize_HalfWord;
|
||||
DMA_InitStructure.DMA_MemoryDataSize = DMA_MemoryDataSize_HalfWord;
|
||||
DMA_InitStructure.DMA_Mode = DMA_Mode_Circular;
|
||||
DMA_InitStructure.DMA_Priority = DMA_Priority_High;
|
||||
@@ -250,9 +159,12 @@ void Adc_Init(void) {
|
||||
ADC_Init(ADC2, &ADC_InitStructure);
|
||||
|
||||
// ADC1,2 regular channel7 channel9 and channel8 configuration ----------//
|
||||
ADC_RegularChannelConfig(ADC1, ADC_Channel_7, 2, ADC_SampleTime_239Cycles5); //28 or 55
|
||||
ADC_RegularChannelConfig(ADC1, ADC_Channel_8, 1, ADC_SampleTime_239Cycles5); //28 or 55
|
||||
ADC_RegularChannelConfig(ADC2, ADC_Channel_9, 1, ADC_SampleTime_55Cycles5); //28 or 55
|
||||
ADC_RegularChannelConfig(ADC1, ADC_Channel_7, 2,
|
||||
ADC_SampleTime_239Cycles5); //28 or 55
|
||||
ADC_RegularChannelConfig(ADC1, ADC_Channel_8, 1,
|
||||
ADC_SampleTime_239Cycles5); //28 or 55
|
||||
ADC_RegularChannelConfig(ADC2, ADC_Channel_9, 1,
|
||||
ADC_SampleTime_55Cycles5); //28 or 55
|
||||
|
||||
/* Enable ADC1 DMA */
|
||||
ADC_DMACmd(ADC1, ENABLE);
|
||||
@@ -275,43 +187,19 @@ void Adc_Init(void) {
|
||||
ADC_SoftwareStartConvCmd(ADC2, ENABLE);
|
||||
}
|
||||
|
||||
/*******************************************************************************
|
||||
Function:
|
||||
Description: Setup Timer2 to fire every 10ms
|
||||
*******************************************************************************/
|
||||
void Init_Timer2(void) {
|
||||
NVIC_InitTypeDef NVIC_InitStructure;
|
||||
TIM_TimeBaseInitTypeDef TIM_TimeBaseStructure;
|
||||
|
||||
NVIC_PriorityGroupConfig(NVIC_PriorityGroup_0);
|
||||
|
||||
TIM_TimeBaseStructure.TIM_Prescaler = 48 - 1; // (48MHz)/48 = 1MHz
|
||||
TIM_TimeBaseStructure.TIM_Period = 10000 - 1; // Interrupt per 10mS
|
||||
TIM_TimeBaseStructure.TIM_ClockDivision = TIM_CKD_DIV1;
|
||||
TIM_TimeBaseStructure.TIM_CounterMode = TIM_CounterMode_Up;
|
||||
TIM_TimeBaseInit(TIM2, &TIM_TimeBaseStructure);
|
||||
TIM_ARRPreloadConfig(TIM2, ENABLE);
|
||||
TIM_ITConfig(TIM2, TIM_IT_Update, ENABLE);
|
||||
TIM_Cmd(TIM2, ENABLE);
|
||||
|
||||
NVIC_InitStructure.NVIC_IRQChannel = TIM2_IRQn;
|
||||
NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 0;
|
||||
NVIC_InitStructure.NVIC_IRQChannelSubPriority = 1;
|
||||
NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
|
||||
NVIC_Init(&NVIC_InitStructure);
|
||||
}
|
||||
/*******************************************************************************
|
||||
Function:
|
||||
Description: Init Timer3 to fire every 50us to be used to control the irons software PWM
|
||||
*******************************************************************************/
|
||||
/*
|
||||
* Init Timer3 to fire every 50us to be used to control the irons software PWM
|
||||
* This needs to be really fast as there is a cap used between this and the driver circuitry
|
||||
* That prevents a stuck mcu heating the tip
|
||||
*/
|
||||
void Init_Timer3(void) {
|
||||
NVIC_InitTypeDef NVIC_InitStructure;
|
||||
TIM_TimeBaseInitTypeDef TIM_TimeBaseStructure;
|
||||
|
||||
NVIC_PriorityGroupConfig(NVIC_PriorityGroup_0);
|
||||
|
||||
TIM_TimeBaseStructure.TIM_Prescaler = 48 - 1; //(48MHz)/48 = 1MHz
|
||||
TIM_TimeBaseStructure.TIM_Period = 50 - 1; // Interrupt per 50us
|
||||
TIM_TimeBaseStructure.TIM_Prescaler = 48 - 1; //(48MHz)/48 = 1MHz
|
||||
TIM_TimeBaseStructure.TIM_Period = 50 - 1; // Interrupt per 50us
|
||||
TIM_TimeBaseStructure.TIM_ClockDivision = TIM_CKD_DIV2;
|
||||
TIM_TimeBaseStructure.TIM_CounterMode = TIM_CounterMode_Up;
|
||||
TIM_TimeBaseInit(TIM3, &TIM_TimeBaseStructure);
|
||||
@@ -325,50 +213,74 @@ void Init_Timer3(void) {
|
||||
NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
|
||||
NVIC_Init(&NVIC_InitStructure);
|
||||
}
|
||||
/*******************************************************************************
|
||||
Function:TIM2_ISR
|
||||
Description:Handles Timer 2 tick. (10mS)
|
||||
Automatically decrements all >0 values in gTime.
|
||||
Also reads the buttons every 4 ticks
|
||||
*******************************************************************************/
|
||||
void TIM2_ISR(void) {
|
||||
static u8 buttonReadDivider;
|
||||
//We want to enable the EXTI IRQ for the two buttons on PA6 and PA9
|
||||
void Init_EXTI(void) {
|
||||
EXTI_InitTypeDef EXTI_InitStructure;
|
||||
NVIC_InitTypeDef NVIC_InitStructure;
|
||||
|
||||
TIM_ClearITPendingBit(TIM2, TIM_IT_Update); // Clear interrupt flag
|
||||
for (u8 i = 0; i < 8; i++)
|
||||
if (gTime[i] > 0)
|
||||
gTime[i]--;
|
||||
GPIO_EXTILineConfig(GPIO_PortSourceGPIOA,
|
||||
GPIO_PinSource6 | GPIO_PinSource9);
|
||||
|
||||
GPIO_EXTILineConfig(GPIO_PortSourceGPIOB,
|
||||
GPIO_PinSource5); //PB5 == accelerometer
|
||||
|
||||
/* Configure EXTI5/6/9 line */
|
||||
EXTI_InitStructure.EXTI_Line = EXTI_Line5 | EXTI_Line6 | EXTI_Line9;
|
||||
EXTI_InitStructure.EXTI_Mode = EXTI_Mode_Interrupt;
|
||||
EXTI_InitStructure.EXTI_Trigger = EXTI_Trigger_Rising_Falling; //trigger on up and down
|
||||
EXTI_InitStructure.EXTI_LineCmd = ENABLE;
|
||||
EXTI_Init(&EXTI_InitStructure);
|
||||
|
||||
/* Enable and set EXTI9_5 Interrupt to the lowest priority */
|
||||
NVIC_InitStructure.NVIC_IRQChannel = EXTI9_5_IRQn;
|
||||
NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 0x0F;
|
||||
NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0x0F;
|
||||
NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
|
||||
NVIC_Init(&NVIC_InitStructure);
|
||||
|
||||
if (++buttonReadDivider % 4 == 0)
|
||||
Scan_Key();
|
||||
}
|
||||
/*******************************************************************************
|
||||
Function: TIM3_ISR
|
||||
Description:Sets the output pin as appropriate
|
||||
If the Heat_cnt >0 then heater on, otherwise off.
|
||||
*******************************************************************************/
|
||||
//Start the system watchdog with a timeout specified
|
||||
//Note you cannot turn this off once you turn it on
|
||||
void Start_Watchdog(uint32_t ms) {
|
||||
IWDG_WriteAccessCmd(IWDG_WriteAccess_Enable);
|
||||
|
||||
/* IWDG counter clock: 40KHz(LSI) / 32 = 1.25 KHz (min:0.8ms -- max:3276.8ms */
|
||||
IWDG_SetPrescaler(IWDG_Prescaler_32);
|
||||
|
||||
/* Set counter reload value to XXms */
|
||||
IWDG_SetReload(ms * 10 / 8);
|
||||
|
||||
/* Reload IWDG counter */
|
||||
IWDG_ReloadCounter();
|
||||
|
||||
/* Enable IWDG (the LSI oscillator will be enabled by hardware) */
|
||||
IWDG_Enable();
|
||||
}
|
||||
|
||||
//Reset the system watchdog
|
||||
void Clear_Watchdog(void) {
|
||||
IWDG_ReloadCounter();
|
||||
}
|
||||
|
||||
//TIM3_ISR handles the tick of the timer 3 IRQ
|
||||
void TIM3_ISR(void) {
|
||||
volatile static u8 heat_flag = 0;
|
||||
//heat flag == used to make the pin toggle
|
||||
//As the output is passed through a cap, the iron is on whilever we provide a square wave drive output
|
||||
|
||||
TIM_ClearITPendingBit(TIM3, TIM_IT_Update); // Clear interrupt flag
|
||||
|
||||
if (gTimeOut > 0)
|
||||
gTimeOut--;
|
||||
if (gMs_timeout > 0)
|
||||
gMs_timeout--;
|
||||
TIM_ClearITPendingBit(TIM3, TIM_IT_Update);
|
||||
// Clear interrupt flag
|
||||
|
||||
if (gHeat_cnt > 0) {
|
||||
gHeat_cnt--;
|
||||
--gHeat_cnt;
|
||||
if (heat_flag)
|
||||
HEAT_OFF();
|
||||
HEAT_OFF(); //write the pin off
|
||||
else
|
||||
HEAT_ON();
|
||||
|
||||
heat_flag = ~heat_flag;
|
||||
}
|
||||
if (gHeat_cnt == 0) {
|
||||
HEAT_OFF();
|
||||
HEAT_ON(); //write the pin on
|
||||
heat_flag = !heat_flag;
|
||||
} else {
|
||||
HEAT_OFF(); //set the pin low for measurements
|
||||
heat_flag = 0;
|
||||
}
|
||||
|
||||
}
|
||||
/******************************** END OF FILE *********************************/
|
||||
|
||||
@@ -1,450 +0,0 @@
|
||||
/********************* (C) COPYRIGHT 2015 e-Design Co.,Ltd. **********************
|
||||
File Name : CTRL.c
|
||||
Version : S100 APP Ver 2.11
|
||||
Description:
|
||||
Author : Celery
|
||||
Data: 2015/08/03
|
||||
History:
|
||||
2015/07/07 ͳһ<CDB3><D2BB><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
|
||||
2015/08/03 <20>Ż<EFBFBD><C5BB>ƶ<EFBFBD><C6B6>ж<EFBFBD>
|
||||
*******************************************************************************/
|
||||
#include <stdio.h>
|
||||
#include <string.h>
|
||||
#include "CTRL.h"
|
||||
#include "Bios.h"
|
||||
#include "UI.h"
|
||||
#include "Hardware.h"
|
||||
#include "S100V0_1.h"
|
||||
#include "Disk.h"
|
||||
#include "MMA8652FC.h"
|
||||
|
||||
#define HEATINGCYCLE 30
|
||||
/******************************************************************************/
|
||||
DEVICE_INFO_SYS device_info;
|
||||
/******************************************************************************/
|
||||
|
||||
u8 gCtrl_status = 1;
|
||||
//^ System current status / operating mode.
|
||||
u16 gHt_flag = 0;
|
||||
vs16 gTemp_data = 250; //
|
||||
s16 gPrev_temp = 250; //
|
||||
u8 gIs_restartkey = 0; //
|
||||
u8 gPre_status = 1; //
|
||||
|
||||
const DEVICE_INFO_SYS info_def = { "2.13", //Ver
|
||||
2000, //T_Standby; // 200C=1800 2520
|
||||
3000, // T_Work; // 350C=3362,
|
||||
100, //T_Step;
|
||||
3 * 60 * 100, //Wait_Time; //3*60*100 3 minutes
|
||||
6 * 60 * 100 // Idle_Time; //6*60*100 6 minutes
|
||||
};
|
||||
struct _pid {
|
||||
s16 settemp; //Current ideal setpoint for the temp
|
||||
s16 actualtemp; //Actual current temp of the tip
|
||||
s16 err; //Error term
|
||||
s16 err_last; //last error term
|
||||
s32 ht_time; //
|
||||
u16 kp, ki, kd; //Constants for the PID Controller
|
||||
s32 integral; //
|
||||
} pid;
|
||||
|
||||
/*******************************************************************************
|
||||
Function: Get_Ctrl_Status
|
||||
Description: Returns the current operating Mode
|
||||
Input:Void
|
||||
Output:Current System Status
|
||||
*******************************************************************************/
|
||||
u8 Get_CtrlStatus(void) {
|
||||
return gCtrl_status;
|
||||
}
|
||||
/*******************************************************************************
|
||||
Function: Set_CtrlStatus
|
||||
Description: Set the current operating Mode
|
||||
Input:status uint8_t
|
||||
Output:Void
|
||||
*******************************************************************************/
|
||||
void Set_CtrlStatus(u8 status) {
|
||||
gCtrl_status = status;
|
||||
}
|
||||
/*******************************************************************************
|
||||
Function: Set_PrevTemp
|
||||
Description:Set the previous temp record for the PID
|
||||
Input:Previous Temp (int16_t)
|
||||
Output:Void
|
||||
*******************************************************************************/
|
||||
void Set_PrevTemp(s16 temp) {
|
||||
gPrev_temp = temp;
|
||||
}
|
||||
|
||||
/*******************************************************************************
|
||||
Function: Get_HtFlag
|
||||
Description:
|
||||
Input:Void
|
||||
Output:Void
|
||||
|
||||
*******************************************************************************/
|
||||
u16 Get_HtFlag(void) {
|
||||
return gHt_flag;
|
||||
}
|
||||
/*******************************************************************************
|
||||
Function:Get_TempVal
|
||||
Description:
|
||||
Input:Void
|
||||
Output:Void
|
||||
*******************************************************************************/
|
||||
s16 Get_TempVal(void) {
|
||||
return gTemp_data;
|
||||
}
|
||||
|
||||
/*******************************************************************************
|
||||
Function:System_Init
|
||||
Description:Init the device info to be a known start value (as defined at top of CTRL.c)
|
||||
Input:Void
|
||||
Output:Void
|
||||
*******************************************************************************/
|
||||
void System_Init(void) {
|
||||
memcpy((void*) &device_info, (void*) &info_def, sizeof(device_info));
|
||||
}
|
||||
/*******************************************************************************
|
||||
Function:Pid_Init
|
||||
Description:Inits the PID values to defaults (0 usually)
|
||||
Input:Void
|
||||
Output:Void
|
||||
*******************************************************************************/
|
||||
void Pid_Init(void) {
|
||||
pid.settemp = 0;
|
||||
pid.actualtemp = 0;
|
||||
pid.err = 0;
|
||||
pid.err_last = 0;
|
||||
pid.integral = 0;
|
||||
pid.ht_time = 0;
|
||||
pid.kp = 15;
|
||||
pid.ki = 2;
|
||||
pid.kd = 1;
|
||||
}
|
||||
|
||||
/*******************************************************************************
|
||||
Function:Pid_Realize
|
||||
Description: Calculates the next heating value using the PID algorithum
|
||||
Input:Current temp from the tip
|
||||
Output:
|
||||
*******************************************************************************/
|
||||
u16 Pid_Realize(s16 temp) {
|
||||
u8 index = 0, index1 = 1;
|
||||
s16 d_err = 0;
|
||||
|
||||
pid.actualtemp = temp;
|
||||
pid.err = pid.settemp - pid.actualtemp; //
|
||||
|
||||
if (pid.err >= 500)
|
||||
index = 0;
|
||||
else {
|
||||
index = 1;
|
||||
pid.integral += pid.err; //
|
||||
}
|
||||
////////////////////////////////////////////////////////////////////////////////
|
||||
//
|
||||
if (pid.settemp < pid.actualtemp) {
|
||||
d_err = pid.actualtemp - pid.settemp;
|
||||
if (d_err > 20) {
|
||||
pid.integral = 0; //
|
||||
index1 = 0;
|
||||
index = 0;
|
||||
}
|
||||
}
|
||||
////////////////////////////////////////////////////////////////////////////////
|
||||
if (pid.err <= 30)
|
||||
index1 = 0;
|
||||
else
|
||||
index1 = 1;
|
||||
pid.ht_time = pid.kp * pid.err + pid.ki * index * pid.integral
|
||||
+ pid.kd * (pid.err - pid.err_last) * index1;
|
||||
pid.err_last = pid.err;
|
||||
|
||||
if (pid.ht_time <= 0)
|
||||
pid.ht_time = 0;
|
||||
else if (pid.ht_time > 30 * 200)
|
||||
pid.ht_time = 30 * 200;
|
||||
|
||||
return pid.ht_time;
|
||||
|
||||
}
|
||||
|
||||
/*******************************************************************************
|
||||
Function:Heating_Time
|
||||
Description:Calcuates the on time for the heating element
|
||||
Input: (temp) current Tip Temp, (wk_temp) current ideal setpoint temp
|
||||
Output: The ON time for the heater element
|
||||
*******************************************************************************/
|
||||
u32 Heating_Time(s16 temp, s16 wk_temp) {
|
||||
u32 heat_timecnt;
|
||||
|
||||
pid.settemp = wk_temp;
|
||||
if (wk_temp > temp) {
|
||||
if (wk_temp - temp >= 18)
|
||||
gHt_flag = 0; //<2F><><EFBFBD><EFBFBD>
|
||||
else
|
||||
gHt_flag = 2; //<2F><><EFBFBD><EFBFBD>
|
||||
} else {
|
||||
if (temp - wk_temp <= 18)
|
||||
gHt_flag = 2; //<2F><><EFBFBD><EFBFBD>
|
||||
else
|
||||
gHt_flag = 1; //<2F><><EFBFBD><EFBFBD>
|
||||
}
|
||||
|
||||
heat_timecnt = Pid_Realize(temp); //Sub_data * 1000;
|
||||
|
||||
return heat_timecnt;
|
||||
}
|
||||
/*******************************************************************************
|
||||
Function:Status_Tran
|
||||
Description: Handles the current status of the unit, and task selection
|
||||
Basically this is called in main() repeatedly
|
||||
Input:Void
|
||||
Output:Void
|
||||
*******************************************************************************/
|
||||
void Status_Tran(void) //
|
||||
{
|
||||
static u16 init_waitingtime = 0; //<2F><>ʼ<EFBFBD><CABC><EFBFBD><EFBFBD>ʱ<EFBFBD><CAB1><EFBFBD>־λ: 0=> δ<><CEB4>ʼ<EFBFBD><CABC>,1=><3E>ѳ<EFBFBD>ʼ<EFBFBD><CABC>
|
||||
static u8 back_prestatus = 0;
|
||||
s16 heat_timecnt = 0, wk_temp;
|
||||
u16 mma_active;
|
||||
|
||||
switch (Get_CtrlStatus()) {
|
||||
case IDLE:
|
||||
switch (Get_gKey()) { //Read current switch positions
|
||||
case KEY_V1: //If V1 key is pressed
|
||||
if (gIs_restartkey != 1) { //check we are not in a soft restart situation
|
||||
if (Read_Vb(1) < 4) { //Read that the input voltage is acceptable??
|
||||
Set_CtrlStatus(TEMP_CTR); //Set to temperature controlled mode (Aka soldering mode)
|
||||
init_waitingtime = 0; //Initialize the wait count to 0
|
||||
TEMPSHOW_TIMER= 0; //Initialize the timer to 0
|
||||
UI_TIMER= 0;
|
||||
G6_TIMER= 0;
|
||||
}
|
||||
}
|
||||
break;
|
||||
case KEY_V2: //check if V2 key is pressed
|
||||
if(gIs_restartkey != 1) { //check this is not a soft restart situation
|
||||
Set_CtrlStatus(THERMOMETER);//Change system to Thermometer mode instead (ie reading temp only, no drive)
|
||||
UI_TIMER = 0;
|
||||
Set_LongKeyFlag(1);//Set the long key pressed flag??
|
||||
}
|
||||
break;
|
||||
case KEY_CN|KEY_V3: //If A&B pressed at the same time, no action
|
||||
break;
|
||||
}
|
||||
if(gIs_restartkey && (KD_TIMER == 0)) { //This is a soft restart situation instead
|
||||
gIs_restartkey = 0;//reset the flag for soft restart
|
||||
Set_gKey(NO_KEY);//reset keys pressed
|
||||
}
|
||||
if(Read_Vb(1) == 0) { //Invalid voltage, I think this means no input power detected
|
||||
if(Get_UpdataFlag() == 1) Set_UpdataFlag(0);
|
||||
Set_CtrlStatus(ALARM);
|
||||
}
|
||||
if(gPre_status != WAIT && gPre_status != IDLE) { //System has been left alone, turn off screen to stop burn in
|
||||
G6_TIMER = device_info.idle_time;
|
||||
Set_gKey(NO_KEY);
|
||||
gPre_status = IDLE;
|
||||
}
|
||||
break;
|
||||
case TEMP_CTR: //We are in soldering mode
|
||||
switch(Get_gKey()) { //switch on the pressed key
|
||||
case KEY_CN|KEY_V1:
|
||||
case KEY_CN|KEY_V2://if either key long pressed
|
||||
Set_HeatingTime(0);//turn off heater
|
||||
Set_CtrlStatus(TEMP_SET);//Goto temperature set mode
|
||||
HEATING_TIMER = 0;//reset heating timer
|
||||
EFFECTIVE_KEY_TIMER = 500;
|
||||
break;
|
||||
case KEY_CN|KEY_V3://Both keys pressed
|
||||
Set_HeatingTime(0);//Stop the heater
|
||||
Set_LongKeyFlag(0);//Reset the long key press flag
|
||||
Set_CtrlStatus(IDLE);//Change the system back to IDLE state (stop soldering)
|
||||
gPre_status = TEMP_CTR;//Set previous status
|
||||
gIs_restartkey = 1;
|
||||
KD_TIMER = 50;//
|
||||
break;
|
||||
}
|
||||
|
||||
if(Read_Vb(1) >= 4) { //Check input voltage is in the acceptable range
|
||||
Set_HeatingTime(0);//Turn of heater as we are out of range
|
||||
Set_LongKeyFlag(0);//reset key flag
|
||||
Set_CtrlStatus(IDLE);//reset to IDLE state
|
||||
gPre_status = TEMP_CTR;//set previous state
|
||||
gIs_restartkey = 1;
|
||||
KD_TIMER = 50;//
|
||||
}
|
||||
|
||||
wk_temp = device_info.t_work; //update setpoint temp from the struct
|
||||
if(HEATING_TIMER == 0) {
|
||||
gTemp_data = Get_Temp(wk_temp);
|
||||
heat_timecnt = Heating_Time(gTemp_data,wk_temp); //Calculate the on time for the heating cycle
|
||||
Set_HeatingTime(heat_timecnt);//set the on time for the heating cycle
|
||||
HEATING_TIMER = HEATINGCYCLE;
|
||||
}
|
||||
|
||||
if(Get_HeatingTime() == 0) { //If calcuated heater time is 0 stop the timer ?
|
||||
HEATING_TIMER = 0;
|
||||
}
|
||||
|
||||
/*
|
||||
* The logic here is :
|
||||
* If the device is moving then disarm the timer and mark it as needed a re-init
|
||||
* else check if the timer needs init, if it does set it up and exit
|
||||
* if the timer does not need init, then check if the timer has expired (its a count down)
|
||||
* If the timer has expired goto wait state instead and shutdown iron
|
||||
*/
|
||||
mma_active = Get_MmaShift(); //check the accelerometer for movement
|
||||
if(mma_active == 0) { //MMA_active = 0 ==> static ,MMA_active = 1 ==>move
|
||||
if(init_waitingtime == 0) { //If the waiting countdown timer is not initialized
|
||||
init_waitingtime = 1;//we initialize it and set this <- flag.
|
||||
ENTER_WAIT_TIMER = device_info.wait_time;
|
||||
}
|
||||
if((init_waitingtime != 0) && (ENTER_WAIT_TIMER == 0)) { //if timeout has been initalized and enter_wait_timer has reached 0
|
||||
gHt_flag = 0;//reset heating flags
|
||||
UI_TIMER = 0;//reset ui timers
|
||||
Set_HeatingTime(0);//turn off the soldering iron
|
||||
Set_gKey(0);//clear keys
|
||||
G6_TIMER = device_info.idle_time;//set the device to idle timer move
|
||||
Set_CtrlStatus(WAIT);//Set system mode to waiting for movement
|
||||
}
|
||||
} else { //The iron is moving
|
||||
init_waitingtime = 0;//mark the waiting timer for needing reset if movement stops again
|
||||
}
|
||||
|
||||
if(Get_AlarmType() > NORMAL_TEMP) { //
|
||||
if(Get_UpdataFlag() == 1) Set_UpdataFlag(0);
|
||||
Set_CtrlStatus(ALARM);//Change to alarm state
|
||||
}
|
||||
break;
|
||||
|
||||
case WAIT:
|
||||
//This mode (WAIT) occures when the iron has been idling on a desk for too long (ie someone forgot it was left on)
|
||||
//In this state we drop to a lower, safer temp and wait for movement or button push to wake up to operating temp again
|
||||
wk_temp = device_info.t_standby;
|
||||
if(device_info.t_standby > device_info.t_work) {
|
||||
//Check if the set temp was greater than the idle temp, if it was we set the idle temp to the set temp
|
||||
//This is done to avoid standby going to a higher temp
|
||||
wk_temp = device_info.t_work;
|
||||
}
|
||||
//if the heating timer has expired, update the readings
|
||||
if(HEATING_TIMER == 0) {
|
||||
gTemp_data = Get_Temp(wk_temp); //read the tip temp
|
||||
heat_timecnt = Heating_Time(gTemp_data,wk_temp);//calculate the new heating timer value from temps
|
||||
Set_HeatingTime(heat_timecnt);//apply the new heating timer
|
||||
HEATING_TIMER = 30;//set update rate for heating_timer
|
||||
}
|
||||
|
||||
if(Read_Vb(1) >= 4) { //If the input voltage is not valid
|
||||
Set_HeatingTime(0);//turn off heater
|
||||
Set_LongKeyFlag(0);//reset key press flag
|
||||
Set_CtrlStatus(IDLE);//goto IDLE state
|
||||
G6_TIMER = device_info.idle_time;
|
||||
gPre_status = WAIT;//set previous state
|
||||
gIs_restartkey = 1;
|
||||
KD_TIMER = 50;//
|
||||
}
|
||||
|
||||
if(G6_TIMER == 0) { //
|
||||
Set_HeatingTime(0);
|
||||
Set_LongKeyFlag(0);
|
||||
gIs_restartkey = 1;
|
||||
KD_TIMER = 200;//
|
||||
gPre_status = WAIT;
|
||||
Set_CtrlStatus(IDLE);
|
||||
}
|
||||
|
||||
//If movement has occurred OR a key has been pressed -> Wakeup back to soldering
|
||||
mma_active = Get_MmaShift();//read accelerometer
|
||||
if(mma_active == 1 || Get_gKey() != 0) {
|
||||
UI_TIMER = 0; //reset the un-needed timers
|
||||
G6_TIMER = 0;
|
||||
init_waitingtime = 0;
|
||||
Set_CtrlStatus(TEMP_CTR);//Go back to soldering iron mode
|
||||
}
|
||||
|
||||
if(Get_AlarmType() > NORMAL_TEMP) { //If an alarm has occurred??
|
||||
if(Get_UpdataFlag() == 1) Set_UpdataFlag(0);
|
||||
Set_CtrlStatus(ALARM);//goto alarm error state
|
||||
}
|
||||
break;
|
||||
|
||||
case TEMP_SET: //We are in the setting soldering iron temp mode
|
||||
if(EFFECTIVE_KEY_TIMER == 0) {
|
||||
gCalib_flag = 1;
|
||||
Disk_BuffInit();
|
||||
Config_Analysis(); //
|
||||
gCalib_flag = 0;
|
||||
Set_CtrlStatus(TEMP_CTR);//return to soldering mode
|
||||
TEMPSHOW_TIMER = 0;//turn off the timer
|
||||
}
|
||||
break;
|
||||
|
||||
case THERMOMETER: //we are measuring the tip temp without applying any power
|
||||
if(KD_TIMER > 0) {
|
||||
Set_gKey(NO_KEY);
|
||||
break;
|
||||
}
|
||||
|
||||
switch(Get_gKey()) {
|
||||
case KEY_CN|KEY_V1:
|
||||
case KEY_CN|KEY_V2:
|
||||
back_prestatus = 1;
|
||||
break;
|
||||
case KEY_CN|KEY_V3:
|
||||
Zero_Calibration(); //Calibrate the temperature (i think??)
|
||||
if(Get_CalFlag() == 1) {
|
||||
Disk_BuffInit();
|
||||
Config_Analysis(); // <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>U<EFBFBD><55>
|
||||
}
|
||||
KD_TIMER = 200; //20150717 <20><EFBFBD>
|
||||
break;
|
||||
default:
|
||||
break;
|
||||
}
|
||||
if(back_prestatus == 1) { //we are exiting
|
||||
back_prestatus = 0;//clear flag
|
||||
Set_HeatingTime(0);//turn off heater? (not sure why this is done again)
|
||||
Set_CtrlStatus(IDLE);//Goto IDLE state
|
||||
gPre_status = THERMOMETER;//set previous state
|
||||
gIs_restartkey = 1;//signal soft restart required as we may have done a calibration
|
||||
Set_LongKeyFlag(0);//reset long key hold flag
|
||||
KD_TIMER = 50;//
|
||||
}
|
||||
break;
|
||||
case ALARM: //An error has occured so we are in alarm state
|
||||
switch(Get_AlarmType()) {
|
||||
case HIGH_TEMP: //over temp condition
|
||||
case SEN_ERR://sensor reading error
|
||||
wk_temp = device_info.t_work;
|
||||
gTemp_data = Get_Temp(wk_temp);
|
||||
if(Get_AlarmType() == NORMAL_TEMP) {
|
||||
Set_CtrlStatus(TEMP_CTR);
|
||||
Set_UpdataFlag(0);
|
||||
}
|
||||
break;
|
||||
case HIGH_VOLTAGE: //over voltage
|
||||
case LOW_VOLTAGE://under voltage
|
||||
if(Read_Vb(1) >= 1 && Read_Vb(1) <= 3) {
|
||||
Set_HeatingTime(0); //turn off heater
|
||||
Set_LongKeyFlag(0);//reset key flag
|
||||
gIs_restartkey = 1;
|
||||
UI_TIMER = 2;// 2<><32>
|
||||
gPre_status = THERMOMETER;
|
||||
Set_CtrlStatus(IDLE);
|
||||
}
|
||||
break;
|
||||
}
|
||||
//V-- No idea what this does yet.. At all.. since it will always be skipped..
|
||||
if(Get_HeatingTime != 0) {
|
||||
Set_HeatingTime(0); //<2F><><EFBFBD><EFBFBD>ֹͣ<CDA3><D6B9><EFBFBD><EFBFBD>
|
||||
HEAT_OFF();
|
||||
}
|
||||
break;
|
||||
default:
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
/******************************** END OF FILE *********************************/
|
||||
@@ -1,773 +0,0 @@
|
||||
/********************* (C) COPYRIGHT 2015 e-Design Co.,Ltd. **********************
|
||||
File Name : Disk.c
|
||||
Version : S100 APP Ver 2.11
|
||||
Description:
|
||||
Author : Celery
|
||||
Data: 2015/07/07
|
||||
History:
|
||||
2016/09/13 Ben V. Brown English notation/comments
|
||||
2015/07/07
|
||||
*******************************************************************************/
|
||||
#include <string.h>
|
||||
#include <stdio.h>
|
||||
#include "APP_Version.h"
|
||||
#include "Disk.h"
|
||||
#include "Bios.h"
|
||||
#include "Flash.h"
|
||||
#include "Oled.h"
|
||||
#include "UI.h"
|
||||
#include "CTRL.h"
|
||||
#include "Hardware.h"
|
||||
|
||||
#define Delay_mS Delay_Ms
|
||||
void Disk_SecWrite(u8* pBuffer, u32 DiskAddr);
|
||||
void Disk_SecRead(u8* pBuffer, u32 DiskAddr);
|
||||
void Soft_Delay(void);
|
||||
//Hard coded boot sector for the virtual device
|
||||
const uint8_t BOOT_SEC[512] = { 0xEB, 0x3C, 0x90, 0x4D, 0x53, 0x44, 0x4F, 0x53,
|
||||
0x35, 0x2E, 0x30, 0x00, 0x02, 0x01, 0x08, 0x00, 0x02, 0x00, 0x02, 0x50,
|
||||
0x00, 0xF8, 0x0c, 0x00, 0x01, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x29, 0xA2, 0x98, 0xE4, 0x6C, 0x4E,
|
||||
0x4F, 0x20, 0x4E, 0x41, 0x4D, 0x45, 0x20, 0x20, 0x20, 0x20, 0x46, 0x41,
|
||||
0x54, 0x31, 0x32, 0x20, 0x20, 0x20, 0x33, 0xC9, 0x8E, 0xD1, 0xBC, 0xF0,
|
||||
0x7B, 0x8E, 0xD9, 0xB8, 0x00, 0x20, 0x8E, 0xC0, 0xFC, 0xBD, 0x00, 0x7C,
|
||||
0x38, 0x4E, 0x24, 0x7D, 0x24, 0x8B, 0xC1, 0x99, 0xE8, 0x3C, 0x01, 0x72,
|
||||
0x1C, 0x83, 0xEB, 0x3A, 0x66, 0xA1, 0x1C, 0x7C, 0x26, 0x66, 0x3B, 0x07,
|
||||
0x26, 0x8A, 0x57, 0xFC, 0x75, 0x06, 0x80, 0xCA, 0x02, 0x88, 0x56, 0x02,
|
||||
0x80, 0xC3, 0x10, 0x73, 0xEB, 0x33, 0xC9, 0x8A, 0x46, 0x10, 0x98, 0xF7,
|
||||
0x66, 0x16, 0x03, 0x46, 0x1C, 0x13, 0x56, 0x1E, 0x03, 0x46, 0x0E, 0x13,
|
||||
0xD1, 0x8B, 0x76, 0x11, 0x60, 0x89, 0x46, 0xFC, 0x89, 0x56, 0xFE, 0xB8,
|
||||
0x20, 0x00, 0xF7, 0xE6, 0x8B, 0x5E, 0x0B, 0x03, 0xC3, 0x48, 0xF7, 0xF3,
|
||||
0x01, 0x46, 0xFC, 0x11, 0x4E, 0xFE, 0x61, 0xBF, 0x00, 0x00, 0xE8, 0xE6,
|
||||
0x00, 0x72, 0x39, 0x26, 0x38, 0x2D, 0x74, 0x17, 0x60, 0xB1, 0x0B, 0xBE,
|
||||
0xA1, 0x7D, 0xF3, 0xA6, 0x61, 0x74, 0x32, 0x4E, 0x74, 0x09, 0x83, 0xC7,
|
||||
0x20, 0x3B, 0xFB, 0x72, 0xE6, 0xEB, 0xDC, 0xA0, 0xFB, 0x7D, 0xB4, 0x7D,
|
||||
0x8B, 0xF0, 0xAC, 0x98, 0x40, 0x74, 0x0C, 0x48, 0x74, 0x13, 0xB4, 0x0E,
|
||||
0xBB, 0x07, 0x00, 0xCD, 0x10, 0xEB, 0xEF, 0xA0, 0xFD, 0x7D, 0xEB, 0xE6,
|
||||
0xA0, 0xFC, 0x7D, 0xEB, 0xE1, 0xCD, 0x16, 0xCD, 0x19, 0x26, 0x8B, 0x55,
|
||||
0x1A, 0x52, 0xB0, 0x01, 0xBB, 0x00, 0x00, 0xE8, 0x3B, 0x00, 0x72, 0xE8,
|
||||
0x5B, 0x8A, 0x56, 0x24, 0xBE, 0x0B, 0x7C, 0x8B, 0xFC, 0xC7, 0x46, 0xF0,
|
||||
0x3D, 0x7D, 0xC7, 0x46, 0xF4, 0x29, 0x7D, 0x8C, 0xD9, 0x89, 0x4E, 0xF2,
|
||||
0x89, 0x4E, 0xF6, 0xC6, 0x06, 0x96, 0x7D, 0xCB, 0xEA, 0x03, 0x00, 0x00,
|
||||
0x20, 0x0F, 0xB6, 0xC8, 0x66, 0x8B, 0x46, 0xF8, 0x66, 0x03, 0x46, 0x1C,
|
||||
0x66, 0x8B, 0xD0, 0x66, 0xC1, 0xEA, 0x10, 0xEB, 0x5E, 0x0F, 0xB6, 0xC8,
|
||||
0x4A, 0x4A, 0x8A, 0x46, 0x0D, 0x32, 0xE4, 0xF7, 0xE2, 0x03, 0x46, 0xFC,
|
||||
0x13, 0x56, 0xFE, 0xEB, 0x4A, 0x52, 0x50, 0x06, 0x53, 0x6A, 0x01, 0x6A,
|
||||
0x10, 0x91, 0x8B, 0x46, 0x18, 0x96, 0x92, 0x33, 0xD2, 0xF7, 0xF6, 0x91,
|
||||
0xF7, 0xF6, 0x42, 0x87, 0xCA, 0xF7, 0x76, 0x1A, 0x8A, 0xF2, 0x8A, 0xE8,
|
||||
0xC0, 0xCC, 0x02, 0x0A, 0xCC, 0xB8, 0x01, 0x02, 0x80, 0x7E, 0x02, 0x0E,
|
||||
0x75, 0x04, 0xB4, 0x42, 0x8B, 0xF4, 0x8A, 0x56, 0x24, 0xCD, 0x13, 0x61,
|
||||
0x61, 0x72, 0x0B, 0x40, 0x75, 0x01, 0x42, 0x03, 0x5E, 0x0B, 0x49, 0x75,
|
||||
0x06, 0xF8, 0xC3, 0x41, 0xBB, 0x00, 0x00, 0x60, 0x66, 0x6A, 0x00, 0xEB,
|
||||
0xB0, 0x4E, 0x54, 0x4C, 0x44, 0x52, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,
|
||||
0x0D, 0x0A, 0x52, 0x65, 0x6D, 0x6F, 0x76, 0x65, 0x20, 0x64, 0x69, 0x73,
|
||||
0x6B, 0x73, 0x20, 0x6F, 0x72, 0x20, 0x6F, 0x74, 0x68, 0x65, 0x72, 0x20,
|
||||
0x6D, 0x65, 0x64, 0x69, 0x61, 0x2E, 0xFF, 0x0D, 0x0A, 0x44, 0x69, 0x73,
|
||||
0x6B, 0x20, 0x65, 0x72, 0x72, 0x6F, 0x72, 0xFF, 0x0D, 0x0A, 0x50, 0x72,
|
||||
0x65, 0x73, 0x73, 0x20, 0x61, 0x6E, 0x79, 0x20, 0x6B, 0x65, 0x79, 0x20,
|
||||
0x74, 0x6F, 0x20, 0x72, 0x65, 0x73, 0x74, 0x61, 0x72, 0x74, 0x0D, 0x0A,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xAC, 0xCB, 0xD8, 0x55, 0xAA };
|
||||
|
||||
static u8 gDisk_buff[0x2600]; //RAM Buffer used to implement the virtual disk
|
||||
static u32 gDisk_var[(512 + 32 + 28) / 4]; //
|
||||
static u32 *gV32 = (u32*) &gDisk_var[512 / 4];
|
||||
static u8 *gVar = (u8*) &gDisk_var[512 / 4 + 8];
|
||||
|
||||
static u8 *gBuff = (u8*) &gDisk_var[0];
|
||||
const u8 gFat_data[] = { 0xF8, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF }; //{0xF8,0XFF,0XFF,0xff,0X0f};//
|
||||
//The options
|
||||
const char *gKey_words[] = { "T_Standby", "T_Work", "Wait_Time", "Idle_Time",
|
||||
"T_Step", "Turn_Off_v", "TempShowFlag", "ZeroP_Ad" };
|
||||
//default settings
|
||||
const char *gDef_set[] = { "T_Standby=200", "T_Work=300", "Wait_Time=180",
|
||||
"Idle_Time=360", "T_Step=10", "Turn_Off_v=10", "TempShowFlag=0",
|
||||
"ZeroP_Ad=239" };
|
||||
//comments for accepted range
|
||||
const char *gSet_range[] = { " #(100~400)\r\n", " #(100~400)\r\n",
|
||||
" #(60~9999)\r\n", " #(300~9999)\r\n", " #(5~25)\r\n",
|
||||
" #(9~12)\r\n", " #(0,1)\r\n", " #ReadOnly\r\n" };
|
||||
|
||||
static u8 gFile_con[512]; //file contents buffer
|
||||
#define CONFIG_CONT 8 /*Number of variables in config.txt*/
|
||||
u8 gRewriteflag[16]; //This flags if this sector has changed and needs to be written to flash
|
||||
|
||||
#define ROW_CONT 35
|
||||
#define FILE_CONT 254
|
||||
/*******************************************************************************
|
||||
Function: Soft_Delay()
|
||||
Description: Small software delay.
|
||||
*******************************************************************************/
|
||||
void Soft_Delay() {
|
||||
int i, j;
|
||||
for (i = 0; i < 1000; i++)
|
||||
for (j = 0; j < 100; j++)
|
||||
;
|
||||
}
|
||||
/*******************************************************************************
|
||||
Function: Set_Ver
|
||||
Description:
|
||||
Input:
|
||||
*******************************************************************************/
|
||||
void Set_Ver(u8 str[], u8 k) {
|
||||
s16 set_ver = 0;
|
||||
|
||||
switch (k) {
|
||||
case 0:
|
||||
set_ver = (str[0] - 48) * 100 + (str[1] - 48) * 10 + (str[2] - 48);
|
||||
device_info.t_standby = set_ver * 10;
|
||||
break;
|
||||
case 1:
|
||||
set_ver = (str[0] - 48) * 100 + (str[1] - 48) * 10 + (str[2] - 48);
|
||||
if (!gCalib_flag)
|
||||
device_info.t_work = set_ver * 10;
|
||||
break;
|
||||
case 2:
|
||||
if (str[3] <= '9' && str[3] >= '0') { //4
|
||||
set_ver = (str[0] - 48) * 1000 + (str[1] - 48) * 100
|
||||
+ (str[2] - 48) * 10 + (str[3] - 48);
|
||||
} else if (str[2] <= '9' && str[2] >= '0') { //3
|
||||
set_ver = (str[0] - 48) * 100 + (str[1] - 48) * 10 + (str[2] - 48);
|
||||
} else if (str[1] <= '9' && str[1] >= '0') { //2
|
||||
set_ver = (str[0] - 48) * 10 + (str[1] - 48);
|
||||
}
|
||||
device_info.wait_time = set_ver * 100;
|
||||
break;
|
||||
case 3:
|
||||
if (str[3] <= '9' && str[3] >= '0') { //4
|
||||
set_ver = (str[0] - 48) * 1000 + (str[1] - 48) * 100
|
||||
+ (str[2] - 48) * 10 + (str[3] - 48);
|
||||
} else if (str[2] <= '9' && str[2] >= '0') { //3
|
||||
set_ver = (str[0] - 48) * 100 + (str[1] - 48) * 10 + (str[2] - 48);
|
||||
}
|
||||
device_info.idle_time = set_ver * 100;
|
||||
break;
|
||||
case 4:
|
||||
if (str[1] <= '9' && str[1] >= '0') { //2
|
||||
set_ver = (str[0] - 48) * 10 + (str[1] - 48);
|
||||
} else {
|
||||
set_ver = str[0] - 48;
|
||||
}
|
||||
device_info.t_step = set_ver * 10;
|
||||
break;
|
||||
case 5:
|
||||
if (str[3] <= '9' && str[3] >= '0') { //4
|
||||
set_ver = (str[0] - 48) * 1000 + (str[1] - 48) * 100
|
||||
+ (str[2] - 48) * 10 + (str[3] - 48);
|
||||
} else if (str[2] <= '9' && str[2] >= '0') { //3
|
||||
set_ver = (str[0] - 48) * 100 + (str[1] - 48) * 10 + (str[2] - 48);
|
||||
} else if (str[1] <= '9' && str[1] >= '0') { //2
|
||||
set_ver = (str[0] - 48) * 10 + (str[1] - 48);
|
||||
} else {
|
||||
set_ver = str[0] - 48;
|
||||
}
|
||||
gTurn_offv = set_ver * 10;
|
||||
break;
|
||||
case 6:
|
||||
set_ver = str[0] - 48;
|
||||
Set_TemperatureShowFlag(set_ver);
|
||||
break;
|
||||
case 7:
|
||||
if (str[2] <= '9' && str[2] >= '0') { //3
|
||||
set_ver = (str[0] - 48) * 100 + (str[1] - 48) * 10 + (str[2] - 48);
|
||||
} else if (str[1] <= '9' && str[1] >= '0') { //2
|
||||
set_ver = (str[0] - 48) * 10 + (str[1] - 48);
|
||||
} else {
|
||||
set_ver = str[0] - 48;
|
||||
}
|
||||
if (!gCalib_flag)
|
||||
gZerop_ad = set_ver;
|
||||
|
||||
break;
|
||||
default:
|
||||
break;
|
||||
}
|
||||
}
|
||||
/*******************************************************************************
|
||||
Function: Cal_Val
|
||||
Description:
|
||||
Inputs:
|
||||
Output:
|
||||
*******************************************************************************/
|
||||
u8 Cal_Val(u8 str[], u8 k, u8 flag) {
|
||||
u16 set_ver;
|
||||
|
||||
switch (k) {
|
||||
case 0:
|
||||
case 1:
|
||||
if (str[2] > '9' || str[2] < '0' || //
|
||||
str[1] > '9' || str[1] < '0' || //
|
||||
str[0] > '4' || str[0] <= '0' || //
|
||||
(str[0] == '4' && (str[1] != '0' || str[2] != '0')))
|
||||
return 0;
|
||||
break;
|
||||
case 2:
|
||||
if (str[3] <= '9' && str[3] >= '0') { //
|
||||
if ((str[2] > '9' && str[2] < '0')
|
||||
|| (str[1] > '9' && str[1] < '0')) //
|
||||
return 0;
|
||||
} else if (str[2] <= '9' && str[2] >= '0') { //
|
||||
if (str[1] > '9' && str[1] < '0') //
|
||||
return 0;
|
||||
} else if (str[1] <= '9' && str[1] >= '0') { //
|
||||
if (str[0] > '9' || str[0] < '6') //
|
||||
return 0;
|
||||
} else {
|
||||
return 0;
|
||||
}
|
||||
break;
|
||||
case 3:
|
||||
if (str[3] <= '9' && str[3] >= '0') { //4
|
||||
if ((str[2] > '9' && str[2] < '0')
|
||||
|| (str[1] > '9' && str[1] < '0')) //
|
||||
return 0;
|
||||
} else if (str[2] <= '9' && str[2] >= '0') { //3
|
||||
if (str[0] > '9' || str[0] < '3') //
|
||||
return 0;
|
||||
} else { //
|
||||
return 0;
|
||||
}
|
||||
break;
|
||||
case 4: //T_Step=10 #(5~25)
|
||||
if (str[1] <= '5' && str[1] >= '0') { //
|
||||
if (str[0] > '2' || str[0] < '0') //
|
||||
return 0;
|
||||
} else {
|
||||
if (str[0] < '5' && (str[0] != '1')) {
|
||||
return 0;
|
||||
}
|
||||
}
|
||||
break;
|
||||
case 5: //Turn_Off_v=10 #(9~12)
|
||||
if (str[1] <= '2' && str[1] >= '0') { //
|
||||
if (str[0] > '9' || str[0] < '0') //
|
||||
return 0;
|
||||
} else {
|
||||
if (str[0] < '9') {
|
||||
return 0;
|
||||
}
|
||||
}
|
||||
break;
|
||||
case 6: //TempShowFlag=0 #(0,1)
|
||||
if (str[0] != '1' && str[0] != '0')
|
||||
return 0;
|
||||
break;
|
||||
case 7:
|
||||
if (str[2] <= '9' && str[2] >= '0') { //3
|
||||
set_ver = (str[0] - 48) * 100 + (str[1] - 48) * 10 + (str[2] - 48);
|
||||
} else if (str[1] <= '9' && str[1] >= '0') { //2
|
||||
set_ver = (str[0] - 48) * 10 + (str[1] - 48);
|
||||
} else {
|
||||
set_ver = str[0] - 48;
|
||||
}
|
||||
if (flag == 1) {
|
||||
if (set_ver != gZerop_ad)
|
||||
return 0;
|
||||
}
|
||||
break;
|
||||
default:
|
||||
break;
|
||||
}
|
||||
return 1;
|
||||
}
|
||||
/*******************************************************************************
|
||||
Function:Disk_BuffInit
|
||||
Description: Initializes the buffer for the virtual disk. By loading from the chips flash
|
||||
*******************************************************************************/
|
||||
void Disk_BuffInit(void) {
|
||||
memcpy(gDisk_buff, (u8*) APP_BASE, 0x2600);
|
||||
memset(gRewriteflag, 0, 16);
|
||||
}
|
||||
/*******************************************************************************
|
||||
Function: Upper
|
||||
Description: Converts the string passed in to upper case
|
||||
Inputs: (str) buffer to change, (len) length of the buffer
|
||||
*******************************************************************************/
|
||||
void Upper(u8* str, u16 len) {
|
||||
u16 i;
|
||||
for (i = 0; i < len; i++) //Loop through the string
|
||||
if (str[i] >= 'a' && str[i] <= 'z') //if char is lower case
|
||||
str[i] -= 32; //shift to upper case
|
||||
}
|
||||
/*******************************************************************************
|
||||
Function: SearchFile
|
||||
Description:
|
||||
Inputs: (pfilename) filename to look for, (pfilelen) length of the file,(root_addr) root folder to search from
|
||||
Outputs: NULL (failed) or pointer to file start
|
||||
*******************************************************************************/
|
||||
u8* SearchFile(u8* pfilename, u16* pfilelen, u16* root_addr) {
|
||||
u16 n, sector;
|
||||
u8 str_name[11];
|
||||
u8* pdiraddr;
|
||||
|
||||
pdiraddr = ROOT_SECTOR;
|
||||
|
||||
for (n = 0; n < 16; n++) {
|
||||
memcpy(str_name, pdiraddr, 11);
|
||||
Upper(str_name, 11); //ensure path is upper case
|
||||
if (memcmp(str_name, pfilename, 11) == 0) {
|
||||
memcpy((u8*) pfilelen, pdiraddr + 0x1C, 2);
|
||||
memcpy((u8*) §or, pdiraddr + 0x1A, 2);
|
||||
return (u8*) FILE_SECTOR + (sector - 2) * 512;
|
||||
}
|
||||
|
||||
pdiraddr += 32;
|
||||
root_addr++;
|
||||
}
|
||||
return NULL;
|
||||
}
|
||||
|
||||
/*******************************************************************************
|
||||
Function:Config_Analysis
|
||||
Description:Reads the CONFIG.TXT if file is found and also the LOGIN.BMP file as well
|
||||
|
||||
*******************************************************************************/
|
||||
u8 Config_Analysis(void) {
|
||||
u32 i, j, k, m, flag;
|
||||
u16 file_len;
|
||||
u8 t_p[CONFIG_CONT][ROW_CONT];
|
||||
u8 str[FILE_CONT];
|
||||
u8 is_illegality = 0;
|
||||
u8* p_file;
|
||||
u16 root_addr;
|
||||
|
||||
root_addr = 0;
|
||||
m = 0;
|
||||
j = 0;
|
||||
//read in the config.txt if it exists
|
||||
if ((p_file = SearchFile((u8*) ("CONFIG TXT"), &file_len, &root_addr))) {
|
||||
memset(t_p, 0x00, CONFIG_CONT * ROW_CONT);
|
||||
memcpy((u8*) gFile_con, p_file, 512);
|
||||
for (k = 0; k < CONFIG_CONT; k++) {
|
||||
j = 0;
|
||||
for (i = m; i < strlen((char *) gFile_con); i++) {
|
||||
if (gFile_con[i] == 0x0D && gFile_con[i + 1] == 0x0A)
|
||||
break;
|
||||
else {
|
||||
if (j < ROW_CONT)
|
||||
t_p[k][j++] = gFile_con[i];
|
||||
m++;
|
||||
}
|
||||
}
|
||||
t_p[k][j] = '\0';
|
||||
m = i + 2;
|
||||
}
|
||||
for (k = 0; k < CONFIG_CONT; k++) {
|
||||
if (memcmp(t_p[k], gKey_words[k], strlen(gKey_words[k])) == 0) {
|
||||
flag = 0;
|
||||
for (i = strlen(gKey_words[k]); i < strlen((char *) t_p[k]);
|
||||
i++) {
|
||||
if (t_p[k][i] >= '0' && t_p[k][i] <= '9') {
|
||||
if (t_p[k][i] == '0') {
|
||||
if (k == 6) {
|
||||
flag = 1;
|
||||
break;
|
||||
} else {
|
||||
flag = 0;
|
||||
break;
|
||||
}
|
||||
}
|
||||
flag = 1;
|
||||
break;
|
||||
} else if ((t_p[k][i] != 0x20) && (t_p[k][i] != 0x3d)) {
|
||||
flag = 0;
|
||||
break;
|
||||
}
|
||||
}
|
||||
if (flag && Cal_Val(t_p[k] + i, k, 0)) {
|
||||
Set_Ver(t_p[k] + i, k);
|
||||
if (k == 0)
|
||||
sprintf((char *) t_p[k], "T_Standby=%d",
|
||||
device_info.t_standby / 10);
|
||||
else if (k == 1)
|
||||
sprintf((char *) t_p[k], "T_Work=%d",
|
||||
device_info.t_work / 10);
|
||||
else if (k == 2)
|
||||
sprintf((char *) t_p[k], "Wait_Time=%ld",
|
||||
device_info.wait_time / 100);
|
||||
else if (k == 3)
|
||||
sprintf((char *) t_p[k], "Idle_Time=%ld",
|
||||
device_info.idle_time / 100);
|
||||
else if (k == 4)
|
||||
sprintf((char *) t_p[k], "T_Step=%d",
|
||||
device_info.t_step / 10);
|
||||
else if (k == 5)
|
||||
sprintf((char *) t_p[k], "Turn_Off_v=%ld",
|
||||
gTurn_offv / 10);
|
||||
else if (k == 6)
|
||||
sprintf((char *) t_p[k], "TempShowFlag=%d",
|
||||
Get_TemperatureShowFlag());
|
||||
else if (k == 7)
|
||||
sprintf((char *) t_p[k], "ZeroP_Ad=%ld", gZerop_ad);
|
||||
} else {
|
||||
memset(t_p[k], 0, strlen((char *) t_p[k]));
|
||||
memcpy(t_p[k], gDef_set[k], strlen((char *) gDef_set[k]));
|
||||
is_illegality = 1;
|
||||
}
|
||||
} else {
|
||||
memcpy(t_p[k], gDef_set[k], strlen((char *) gDef_set[k]));
|
||||
is_illegality = 1;
|
||||
}
|
||||
}
|
||||
|
||||
if (is_illegality || gCalib_flag) {
|
||||
memset(str, 0x00, FILE_CONT);
|
||||
m = 0;
|
||||
for (k = 0; k < CONFIG_CONT; k++) {
|
||||
strcat((char *) str, (char *) t_p[k]);
|
||||
strcat((char *) str, (char *) gSet_range[k]);
|
||||
}
|
||||
m = strlen((char *) str);
|
||||
|
||||
if (m < 256) {
|
||||
gDisk_buff[0x400 + root_addr * 32 + 0x1C] = m; //strlen((char *)str);
|
||||
gDisk_buff[0x400 + root_addr * 32 + 0x1D] = 0;
|
||||
} else {
|
||||
gDisk_buff[0x400 + root_addr * 32 + 0x1C] = m % 256;
|
||||
gDisk_buff[0x400 + root_addr * 32 + 0x1D] = m / 256;
|
||||
}
|
||||
|
||||
gRewriteflag[(p_file - ROOT_SECTOR + 0x200) / 0x400] = 1;
|
||||
memcpy(p_file, str, strlen((char *) str));
|
||||
ReWriteFlsash();
|
||||
}
|
||||
} else {
|
||||
if ((p_file = SearchFile("LOGOIN BMP", &file_len, &root_addr))) {
|
||||
memcpy(str, p_file, 254);
|
||||
memset(gDisk_buff, 0x00, 0x2600);
|
||||
memcpy(ROOT_SECTOR + 32, "LOGOIN BMP", 0xC);
|
||||
memcpy(FILE_SECTOR + 512, str, 254);
|
||||
gDisk_buff[0x40B + 32] = 0x0; //<2F><><EFBFBD><EFBFBD>
|
||||
*(u32*) (VOLUME_BASE + 32) = VOLUME;
|
||||
gDisk_buff[0x41A + 32] = 0x03; //<2F>غ<EFBFBD>
|
||||
gDisk_buff[0x41C + 32] = 254; //<2F>ļ<EFBFBD><C4BC><EFBFBD>С
|
||||
} else {
|
||||
memset(gDisk_buff, 0x00, 0x2600);
|
||||
}
|
||||
|
||||
memcpy(ROOT_SECTOR, "CONFIG TXT", 0xC);
|
||||
memcpy(FAT1_SECTOR, gFat_data, 6);
|
||||
memcpy(FAT2_SECTOR, gFat_data, 6);
|
||||
|
||||
m = 0;
|
||||
for (k = 0; k < CONFIG_CONT; k++) {
|
||||
memcpy(FILE_SECTOR + m, gDef_set[k], strlen((char *) gDef_set[k]));
|
||||
m += strlen((char *) gDef_set[k]);
|
||||
memcpy(FILE_SECTOR + m, gSet_range[k],
|
||||
strlen((char *) gSet_range[k]));
|
||||
m += strlen((char *) gSet_range[k]);
|
||||
}
|
||||
|
||||
gDisk_buff[0x40B] = 0x0;
|
||||
*(u32*) VOLUME_BASE = VOLUME;
|
||||
gDisk_buff[0x41A] = 0x02;
|
||||
gDisk_buff[0x41C] = m;
|
||||
ReWrite_All();
|
||||
}
|
||||
|
||||
gVar[F_TYPE] = HEX;
|
||||
gVar[F_FLAG] = RDY;
|
||||
gVar[SEG_ST] = 0;
|
||||
gV32[OFFSET] = 0;
|
||||
gV32[COUNT] = 0;
|
||||
gV32[WR_CNT] = 0;
|
||||
gV32[RD_CNT] = 0;
|
||||
return 0;
|
||||
}
|
||||
/*******************************************************************************
|
||||
Function: Disk_SecWrite
|
||||
Description:
|
||||
Inputs:
|
||||
*******************************************************************************/
|
||||
void Disk_SecWrite(u8* pbuffer, u32 diskaddr) {
|
||||
u32 i, j, k, m, flag;
|
||||
u8 t_p[CONFIG_CONT][ROW_CONT];
|
||||
u8 str[FILE_CONT];
|
||||
u8 ver[20];
|
||||
static u16 Config_flag = 0;
|
||||
|
||||
if (diskaddr == 0x1000) { // Write FAT1 sector
|
||||
if (memcmp(pbuffer, (u8*) FAT1_SECTOR, 512)) { //check different
|
||||
memcpy((u8*) FAT1_SECTOR, pbuffer, 512);
|
||||
gRewriteflag[0] = 1;
|
||||
}
|
||||
} else if (diskaddr == 0x2800) { // Write FAT2 sector
|
||||
if (memcmp(pbuffer, (u8*) FAT2_SECTOR, 512)) { //check different
|
||||
memcpy((u8*) FAT2_SECTOR, pbuffer, 512);
|
||||
gRewriteflag[0] = 1;
|
||||
}
|
||||
} else if (diskaddr == 0x4000) { // Write DIR sector
|
||||
if (memcmp(pbuffer, (u8*) ROOT_SECTOR, 512)) { //check different
|
||||
memcpy((u8*) ROOT_SECTOR, pbuffer, 512);
|
||||
gRewriteflag[1] = 1;
|
||||
for (i = 0; i < 16; i++) {
|
||||
memcpy((u8*) ver, (u8*) (pbuffer), 12); //copy the filename out for comparison
|
||||
if (memcmp(ver, "CONFIG TXT", 11) == 0) { //if file name matches
|
||||
Config_flag = pbuffer[0x1A];
|
||||
break;
|
||||
}
|
||||
pbuffer += 32; //move to the next chunk of the pbuffer
|
||||
}
|
||||
}
|
||||
} else if (diskaddr >= 0x8000 && diskaddr <= 0xA000) { // Write FILE sector
|
||||
if (memcmp(pbuffer, (u8*) (FILE_SECTOR + (diskaddr - 0x8000)), 512)) { //check if different
|
||||
memcpy((u8*) (FILE_SECTOR + (diskaddr - 0x8000)), pbuffer, 512);
|
||||
}
|
||||
if ((((diskaddr - 0x8000) / 0x200) + 2) == Config_flag) {
|
||||
m = 0;
|
||||
memset(t_p, 0x00, CONFIG_CONT * ROW_CONT);
|
||||
memcpy((u8*) (gFile_con), pbuffer, 512);
|
||||
|
||||
for (k = 0; k < CONFIG_CONT; k++) { //
|
||||
j = 0;
|
||||
for (i = m; i < strlen((char *) gFile_con); i++) { //
|
||||
if (gFile_con[i] == 0x0D && gFile_con[i + 1] == 0x0A)
|
||||
break;
|
||||
else {
|
||||
if (j < ROW_CONT)
|
||||
t_p[k][j++] = gFile_con[i];
|
||||
m++;
|
||||
}
|
||||
}
|
||||
t_p[k][j] = '\0';
|
||||
m = i + 2;
|
||||
}
|
||||
|
||||
for (k = 0; k < CONFIG_CONT; k++) {
|
||||
if (memcmp(t_p[k], gKey_words[k], strlen(gKey_words[k])) == 0) {
|
||||
flag = 0;
|
||||
for (i = strlen(gKey_words[k]); i < strlen((char *) t_p[k]);
|
||||
i++) {
|
||||
if (t_p[k][i] >= '0' && t_p[k][i] <= '9') {
|
||||
if (t_p[k][i] == '0') {
|
||||
if (k == 6) {
|
||||
flag = 1;
|
||||
break;
|
||||
} else {
|
||||
flag = 0;
|
||||
break;
|
||||
}
|
||||
}
|
||||
flag = 1;
|
||||
break;
|
||||
} else if ((t_p[k][i] != 0x20) && (t_p[k][i] != 0x3d)) {
|
||||
flag = 0;
|
||||
break;
|
||||
}
|
||||
}
|
||||
if ((!flag) || (!Cal_Val(t_p[k] + i, k, 1))) {
|
||||
return;
|
||||
} else {
|
||||
Set_Ver(t_p[k] + i, k);
|
||||
|
||||
memset(t_p[k], 0, strlen((char *) t_p[k]));
|
||||
if (k == 0)
|
||||
sprintf((char *) t_p[k], "T_Standby=%d",
|
||||
device_info.t_standby / 10);
|
||||
else if (k == 1)
|
||||
sprintf((char *) t_p[k], "T_Work=%d",
|
||||
device_info.t_work / 10);
|
||||
else if (k == 2)
|
||||
sprintf((char *) t_p[k], "Wait_Time=%ld",
|
||||
device_info.wait_time / 100);
|
||||
else if (k == 3)
|
||||
sprintf((char *) t_p[k], "Idle_Time=%ld",
|
||||
device_info.idle_time / 100);
|
||||
else if (k == 4)
|
||||
sprintf((char *) t_p[k], "T_Step=%d",
|
||||
device_info.t_step / 10);
|
||||
else if (k == 5)
|
||||
sprintf((char *) t_p[k], "Turn_Off_v=%ld",
|
||||
gTurn_offv / 10);
|
||||
else if (k == 6)
|
||||
sprintf((char *) t_p[k], "TempShowFlag=%d",
|
||||
Get_TemperatureShowFlag());
|
||||
else if (k == 7)
|
||||
sprintf((char *) t_p[k], "ZeroP_Ad=%ld", gZerop_ad);
|
||||
}
|
||||
} else {
|
||||
memcpy(t_p[k], gDef_set[k], strlen((char *) gDef_set[k]));
|
||||
return;
|
||||
}
|
||||
}
|
||||
|
||||
memset(str, 0, FILE_CONT);
|
||||
for (k = 0; k < CONFIG_CONT; k++) {
|
||||
strcat((char *) str, (char *) t_p[k]);
|
||||
strcat((char *) str, (char *) gSet_range[k]);
|
||||
}
|
||||
m = strlen((char *) str);
|
||||
gDisk_buff[0x400 + (Config_flag - 2) * 32 + 0x1C] = m % 256;
|
||||
gDisk_buff[0x400 + (Config_flag - 2) * 32 + 0x1D] = m / 256;
|
||||
|
||||
memcpy((u8*) (FILE_SECTOR), (u8*) str, 512);
|
||||
gRewriteflag[1] = 1;
|
||||
gRewriteflag[((diskaddr - 0x8000 + 0x200) / 0x400) + 1] = 1;
|
||||
ReWriteFlsash();
|
||||
return;
|
||||
|
||||
}
|
||||
|
||||
gRewriteflag[1] = 1;
|
||||
gRewriteflag[((diskaddr - 0x8000 + 0x200) / 0x400) + 1] = 1;
|
||||
ReWriteFlsash();
|
||||
}
|
||||
ReWriteFlsash();
|
||||
}
|
||||
|
||||
/*******************************************************************************
|
||||
Function: Disk_SecRead
|
||||
Description: Reads a sector from the virtual disk
|
||||
*******************************************************************************/
|
||||
void Disk_SecRead(u8* pbuffer, u32 disk_addr) {
|
||||
Soft_Delay();
|
||||
if (disk_addr == 0x0000) { // Read BOOT sector
|
||||
memcpy(pbuffer, BOOT_SEC, 512);
|
||||
} else if (disk_addr == 0x1000) { // Read FAT1 sector
|
||||
memcpy(pbuffer, FAT1_SECTOR, 512);
|
||||
} else if (disk_addr == 0x2800) { // Read FAT2 sector
|
||||
memcpy(pbuffer, FAT2_SECTOR, 512);
|
||||
} else if (disk_addr == 0x4000) { // Read DIR sector
|
||||
memcpy(pbuffer, (u8*) (ROOT_SECTOR), 512);
|
||||
} else if (disk_addr >= 0x8000 && disk_addr <= 0xA000) { // Read FILE sector
|
||||
memcpy(pbuffer, (u8*) (APP_BASE + 0x600 + (disk_addr - 0x8000)), 512);
|
||||
} else {
|
||||
memset(pbuffer, 0, 512); //unknown, return 0's
|
||||
}
|
||||
}
|
||||
/*******************************************************************************
|
||||
Function:ReWriteFlsash
|
||||
Description:
|
||||
Output:RDY(all good) or ERR (error)
|
||||
*******************************************************************************/
|
||||
u8 ReWriteFlsash(void) {
|
||||
u32 i, j;
|
||||
u8 result;
|
||||
u16 *f_buff;
|
||||
|
||||
FLASH_Unlock();
|
||||
for (i = 0; i < 16; i++) {
|
||||
if (gRewriteflag[i]) {
|
||||
gRewriteflag[i] = 0;
|
||||
FLASH_Erase(APP_BASE + i * 0x400);
|
||||
f_buff = (u16*) &gDisk_buff[i * 0x400];
|
||||
for (j = 0; j < 0x400; j += 2) { //Loop through the 1k block
|
||||
result = FLASH_Prog((u32) (APP_BASE + i * 0x400 + j), //program each 16 bit block
|
||||
*f_buff++);
|
||||
if (result != FLASH_COMPLETE) { //something went wrong
|
||||
FLASH_Lock(); //make sure the flash is locked again
|
||||
return ERR; //return ERR
|
||||
}
|
||||
}
|
||||
break;
|
||||
}
|
||||
}
|
||||
FLASH_Lock();
|
||||
return RDY;
|
||||
}
|
||||
/*******************************************************************************
|
||||
Function: ReWrite_All
|
||||
Description:
|
||||
Output:
|
||||
*******************************************************************************/
|
||||
u8 ReWrite_All(void) {
|
||||
u16 i;
|
||||
u8 result;
|
||||
u16 *f_buff = (u16*) gDisk_buff;
|
||||
|
||||
FLASH_Unlock();
|
||||
for (i = 0; i < 9; i++)
|
||||
FLASH_Erase(APP_BASE + i * 0x400);
|
||||
for (i = 0; i < 0X2600; i += 2) {
|
||||
result = FLASH_Prog((u32) (APP_BASE + i), *f_buff++);
|
||||
if (result != FLASH_COMPLETE)
|
||||
return ERR;
|
||||
}
|
||||
FLASH_Lock();
|
||||
return RDY;
|
||||
}
|
||||
/*******************************************************************************
|
||||
Function:Erase
|
||||
Description: Erase the first 9k from APP_BASE
|
||||
*******************************************************************************/
|
||||
void Erase(void) {
|
||||
u16 i;
|
||||
FLASH_Unlock(); //unlock the mcu flash controller
|
||||
for (i = 0; i < 9; i++)
|
||||
FLASH_Erase(APP_BASE + i * 0x400); //erase the flash
|
||||
|
||||
FLASH_Lock();
|
||||
}
|
||||
/*******************************************************************************
|
||||
Function: Read_Memory
|
||||
Description:
|
||||
*******************************************************************************/
|
||||
void Read_Memory(u32 r_offset, u32 r_length) {
|
||||
static u32 offset, length, block_offset;
|
||||
|
||||
if (gVar[USB_ST] == TXFR_IDLE) {
|
||||
offset = r_offset * SECTOR_SIZE;
|
||||
length = r_length * SECTOR_SIZE;
|
||||
gVar[USB_ST] = TXFR_ONGOING;
|
||||
}
|
||||
if (gVar[USB_ST] == TXFR_ONGOING) {
|
||||
if (!gV32[RD_CNT]) {
|
||||
Disk_SecRead(gBuff, offset);
|
||||
UserToPMABufferCopy(gBuff, ENDP1_TXADDR, BULK_MAX_PACKET_SIZE);
|
||||
gV32[RD_CNT] = SECTOR_SIZE - BULK_MAX_PACKET_SIZE;
|
||||
block_offset = BULK_MAX_PACKET_SIZE;
|
||||
} else {
|
||||
UserToPMABufferCopy(gBuff + block_offset, ENDP1_TXADDR,
|
||||
BULK_MAX_PACKET_SIZE);
|
||||
gV32[RD_CNT] -= BULK_MAX_PACKET_SIZE;
|
||||
block_offset += BULK_MAX_PACKET_SIZE;
|
||||
}
|
||||
SetEPTxCount(ENDP1, BULK_MAX_PACKET_SIZE);
|
||||
SetEPTxStatus(ENDP1, EP_TX_VALID);
|
||||
offset += BULK_MAX_PACKET_SIZE;
|
||||
length -= BULK_MAX_PACKET_SIZE;
|
||||
|
||||
CSW.dDataResidue -= BULK_MAX_PACKET_SIZE;
|
||||
}
|
||||
if (length == 0) {
|
||||
gV32[RD_CNT] = 0;
|
||||
block_offset = 0;
|
||||
offset = 0;
|
||||
Bot_State = BOT_DATA_IN_LAST;
|
||||
gVar[USB_ST] = TXFR_IDLE;
|
||||
}
|
||||
}
|
||||
/*******************************************************************************
|
||||
Function: Write_Memory
|
||||
Description:
|
||||
*******************************************************************************/
|
||||
void Write_Memory(u32 w_offset, u32 w_length) {
|
||||
static u32 offset, length;
|
||||
u32 idx, temp = gV32[WR_CNT] + 64;
|
||||
|
||||
if (gVar[USB_ST] == TXFR_IDLE) {
|
||||
offset = w_offset * SECTOR_SIZE;
|
||||
length = w_length * SECTOR_SIZE;
|
||||
gVar[USB_ST] = TXFR_ONGOING;
|
||||
}
|
||||
if (gVar[USB_ST] == TXFR_ONGOING) {
|
||||
for (idx = 0; gV32[WR_CNT] < temp; gV32[WR_CNT]++)
|
||||
*(u8 *) (gBuff + gV32[WR_CNT]) = Bulk_Buff[idx++];
|
||||
|
||||
offset += Data_Len;
|
||||
length -= Data_Len;
|
||||
|
||||
if (!(length % SECTOR_SIZE)) {
|
||||
gV32[WR_CNT] = 0;
|
||||
Disk_SecWrite(gBuff, offset - SECTOR_SIZE);
|
||||
}
|
||||
|
||||
CSW.dDataResidue -= Data_Len;
|
||||
SetEPRxStatus(ENDP2, EP_RX_VALID); /* enable the next transaction*/
|
||||
}
|
||||
if ((length == 0) || (Bot_State == BOT_CSW_Send)) {
|
||||
gV32[WR_CNT] = 0;
|
||||
Set_CSW(CSW_CMD_PASSED, SEND_CSW_ENABLE);
|
||||
gVar[USB_ST] = TXFR_IDLE;
|
||||
}
|
||||
}
|
||||
/********************************* END OF FILE ******************************/
|
||||
@@ -1,198 +0,0 @@
|
||||
/********************* (C) COPYRIGHT 2015 e-Design Co.,Ltd. ********************
|
||||
File Name : EXT_Flash.c
|
||||
Version : S100 APP Ver 2.11
|
||||
Description:
|
||||
Author : bure
|
||||
Data:
|
||||
History:
|
||||
*******************************************************************************/
|
||||
|
||||
#include <string.h>
|
||||
#include <stdio.h>
|
||||
#include "Ext_Flash.h"
|
||||
#include "Bios.h"
|
||||
|
||||
|
||||
#define OK 0 // <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
|
||||
#define SEC_ERR 1 // <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD>д<EFBFBD><D0B4><EFBFBD><EFBFBD>
|
||||
#define TMAX 100000 // <20><>ʱ<EFBFBD><CAB1><EFBFBD><EFBFBD>
|
||||
|
||||
u32 Mass_Memory_Size;
|
||||
u32 Mass_Block_Size;
|
||||
u32 Mass_Block_Count;
|
||||
u32 Tout;
|
||||
|
||||
|
||||
u8 flash_mode;
|
||||
|
||||
void ExtFLASH_SectorErase(u32 SectorAddr);
|
||||
|
||||
/*******************************************************************************
|
||||
SPI_FLASH_SectorErase : Sector Erases the specified FLASH Page.(4k/sector)
|
||||
*******************************************************************************/
|
||||
void ExtFLASH_SectorErase(u32 SectorAddr)
|
||||
{
|
||||
ExtFlash_WriteEnable();
|
||||
ExtFlash_CS_LOW();
|
||||
ExtFlash_SendByte(SE);
|
||||
ExtFlash_SendByte((SectorAddr & 0xFF0000) >> 16); //Send high address byte
|
||||
ExtFlash_SendByte((SectorAddr & 0xFF00) >> 8); //Send medium address byte
|
||||
ExtFlash_SendByte(SectorAddr & 0xFF); //Send low address byte
|
||||
ExtFlash_CS_HIGH();
|
||||
ExtFlash_WaitForWriteEnd(); // Wait the end of Flash writing
|
||||
}
|
||||
|
||||
|
||||
void ExtFlash_PageWR(u8* pBuffer, u32 WriteAddr)
|
||||
{
|
||||
u32 addr,i,j;
|
||||
u8* ptr;
|
||||
u8 page=0,flag=0,write_mode;
|
||||
u8 buffer[256];
|
||||
|
||||
flag=0;
|
||||
if(flash_mode==FLASH_8M) {
|
||||
addr=WriteAddr & 0xFFF000;
|
||||
page=16;
|
||||
} else {
|
||||
page=1;
|
||||
addr=WriteAddr & 0xFFFF00;
|
||||
}
|
||||
while(page>0) {
|
||||
ExtFlash_PageRD((u8*)&buffer,addr, 256);
|
||||
for(j=0; j<255; j++) {
|
||||
if(buffer[j++]!=0xff) {
|
||||
flag=1;
|
||||
break;
|
||||
}
|
||||
}
|
||||
addr+=256;
|
||||
page--;
|
||||
}
|
||||
if(flash_mode==FLASH_8M) {
|
||||
page=16;
|
||||
addr=WriteAddr & 0xFFF000;
|
||||
if(flag==1)ExtFLASH_SectorErase(addr);
|
||||
write_mode=PP;
|
||||
} else {
|
||||
page=1;
|
||||
addr=WriteAddr & 0xFFFF00;
|
||||
if(flag==1)write_mode=PW;
|
||||
else write_mode=PP;
|
||||
}
|
||||
ptr=pBuffer;
|
||||
for(i=0; i<page; i++) {
|
||||
ExtFlash_PageProg(ptr, addr,write_mode);
|
||||
addr+=256;
|
||||
ptr+=256;
|
||||
}
|
||||
}
|
||||
|
||||
/*******************************************************************************
|
||||
дFLASHҳ(256 Bytes)<29><> Mode=0: <20><>0<EFBFBD><30>1<EFBFBD><31><EFBFBD>ݸ<EFBFBD>д Mode=1: <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD>д
|
||||
*******************************************************************************/
|
||||
void ExtFlash_PageProg(u8* pBuffer, u32 WriteAddr,u8 CMD)
|
||||
{
|
||||
u16 Lenght = 256;
|
||||
|
||||
ExtFlash_CS_HIGH();
|
||||
ExtFlash_WaitForWriteEnd();
|
||||
ExtFlash_WriteEnable();
|
||||
ExtFlash_CS_LOW();
|
||||
ExtFlash_SendByte(CMD);
|
||||
ExtFlash_SendByte((WriteAddr & 0xFF0000) >> 16);
|
||||
ExtFlash_SendByte((WriteAddr & 0xFF00) >> 8);
|
||||
ExtFlash_SendByte(WriteAddr & 0xFF);
|
||||
while(Lenght--) { // while there is data to be written on the FLASH
|
||||
ExtFlash_SendByte((*pBuffer));
|
||||
pBuffer++;
|
||||
}
|
||||
ExtFlash_CS_HIGH();
|
||||
ExtFlash_WaitForWriteEnd();
|
||||
}
|
||||
|
||||
/*******************************************************************************
|
||||
SPI_FLASH_BufferRead
|
||||
*******************************************************************************/
|
||||
void ExtFlash_PageRD(u8* pBuffer, u32 ReadAddr, u16 Lenght)
|
||||
{
|
||||
ExtFlash_CS_HIGH();
|
||||
ExtFlash_WaitForWriteEnd();
|
||||
ExtFlash_CS_LOW();
|
||||
ExtFlash_SendByte(READ);
|
||||
ExtFlash_SendByte((ReadAddr & 0xFF0000) >> 16);
|
||||
ExtFlash_SendByte((ReadAddr& 0xFF00) >> 8);
|
||||
ExtFlash_SendByte(ReadAddr & 0xFF);
|
||||
|
||||
while(Lenght--) { // while there is data to be read
|
||||
*pBuffer = (ExtFlash_SendByte(Dummy_Byte));
|
||||
pBuffer++;
|
||||
}
|
||||
ExtFlash_CS_HIGH();
|
||||
}
|
||||
/*******************************************************************************
|
||||
SPI_FLASH_ReadByte
|
||||
*******************************************************************************/
|
||||
u8 ExtFlash_ReadByte(void)
|
||||
{
|
||||
return (ExtFlash_SendByte(Dummy_Byte));
|
||||
}
|
||||
|
||||
/*******************************************************************************
|
||||
SPI_FLASH_SendByte
|
||||
*******************************************************************************/
|
||||
u8 ExtFlash_SendByte(u8 byte)
|
||||
{
|
||||
Tout = 0;
|
||||
while(SPI_I2S_GetFlagStatus(SPI3, SPI_I2S_FLAG_TXE) == RESET) {
|
||||
if(Tout++ > TMAX) return 255;
|
||||
}
|
||||
SPI_I2S_SendData(SPI3, byte);
|
||||
Tout = 0;
|
||||
while(SPI_I2S_GetFlagStatus(SPI3, SPI_I2S_FLAG_RXNE) == RESET) {
|
||||
if(Tout++ > TMAX) return 255;
|
||||
}
|
||||
return SPI_I2S_ReceiveData(SPI3);
|
||||
}
|
||||
/*******************************************************************************
|
||||
SPI_FLASH_WriteEnable
|
||||
*******************************************************************************/
|
||||
void ExtFlash_WriteEnable(void)
|
||||
{
|
||||
ExtFlash_CS_LOW();
|
||||
ExtFlash_SendByte(WREN);
|
||||
ExtFlash_CS_HIGH();
|
||||
}
|
||||
/*******************************************************************************
|
||||
SPI_FLASH_WaitForWriteEnd
|
||||
*******************************************************************************/
|
||||
void ExtFlash_WaitForWriteEnd(void)
|
||||
{
|
||||
u8 FLASH_Status = 0;
|
||||
|
||||
ExtFlash_CS_LOW();
|
||||
ExtFlash_SendByte(RDSR);
|
||||
Tout = 0;
|
||||
do {
|
||||
FLASH_Status = ExtFlash_SendByte(Dummy_Byte);
|
||||
if(Tout++ > TMAX) return;
|
||||
} while((FLASH_Status & WIP_Flag) == SET); // Write in progress
|
||||
ExtFlash_CS_HIGH();
|
||||
}
|
||||
/*******************************************************************************
|
||||
MAL_GetStatus
|
||||
*******************************************************************************/
|
||||
void MAL_GetStatus (void)
|
||||
{
|
||||
if(flash_mode==FLASH_8M) {
|
||||
Mass_Block_Count = 2048; //FLASH_SIZE/FLASH_PAGE_SIZE;
|
||||
Mass_Block_Size = 512*8; //FLASH_PAGE_SIZE; 4096
|
||||
Mass_Memory_Size = 512*4096*4 ; //FLASH_SIZE; 0x800000;
|
||||
} else {
|
||||
Mass_Block_Count = 4096; //FLASH_SIZE/FLASH_PAGE_SIZE; 4096
|
||||
Mass_Block_Size = 512; //FLASH_PAGE_SIZE;
|
||||
Mass_Memory_Size = 512*4096 ; //FLASH_SIZE; 0x200000;
|
||||
}
|
||||
}
|
||||
|
||||
/********************************* END OF FILE ******************************/
|
||||
@@ -1,33 +0,0 @@
|
||||
/********************* (C) COPYRIGHT 2015 e-Design Co.,Ltd. ********************
|
||||
File Name : Flash.c
|
||||
Version : Author : bure
|
||||
*******************************************************************************/
|
||||
#include "APP_Version.h"
|
||||
#include "Flash.h"
|
||||
#include "Bios.h"
|
||||
|
||||
|
||||
/*******************************************************************************
|
||||
Function: FLASH_Prog
|
||||
Description: Programs the data into the system flash at the specified address
|
||||
*******************************************************************************/
|
||||
u8 FLASH_Prog(u32 Address, u16 Data) {
|
||||
if (FLASH_WaitForLastOperation(WAIT_TIMES) != FLASH_TIMEOUT)
|
||||
FLASH_ClearFlag(
|
||||
FLASH_FLAG_EOP | FLASH_FLAG_PGERR | FLASH_FLAG_WRPRTERR);
|
||||
return FLASH_ProgramHalfWord(Address, Data);
|
||||
}
|
||||
/*******************************************************************************
|
||||
Function: FLASH_Erase
|
||||
Description: Erases a page of flash
|
||||
Inputs: Starting address for the page to erase
|
||||
*******************************************************************************/
|
||||
void FLASH_Erase(u32 Address) {
|
||||
if (Address % FLASH_PAGE == 0) { // FLASH Page start (1K/Page)
|
||||
if (FLASH_WaitForLastOperation(WAIT_TIMES) != FLASH_TIMEOUT) //wait for last op to finish
|
||||
FLASH_ClearFlag(
|
||||
FLASH_FLAG_EOP | FLASH_FLAG_PGERR | FLASH_FLAG_WRPRTERR);
|
||||
FLASH_ErasePage(Address); // FLASH Page erase
|
||||
}
|
||||
}
|
||||
/********************************* END OF FILE ******************************/
|
||||
@@ -1,384 +0,0 @@
|
||||
/********************* (C) COPYRIGHT 2015 e-Design Co.,Ltd. **********************
|
||||
File Name : CTRL.c
|
||||
Version : S100 APP Ver 2.11
|
||||
Description:
|
||||
Author : Celery
|
||||
Data: 2015/07/07
|
||||
History:
|
||||
2015/07/07 ͳһ<CDB3><D2BB><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
|
||||
2015/07/20 <20>Ӵ<EFBFBD><D3B4>¶ȱ<C2B6><C8B1><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
|
||||
*******************************************************************************/
|
||||
#include <stdio.h>
|
||||
#include <string.h>
|
||||
#include "APP_Version.h"
|
||||
#include "Hardware.h"
|
||||
#include "CTRL.h"
|
||||
#include "Bios.h"
|
||||
#include "UI.h"
|
||||
/******************************************************************************/
|
||||
#define CAL_AD 250
|
||||
const u32 gVol[] = { 3900, 2760, 1720, 584 };
|
||||
const u16 gRate[] = { 300, 150, 90, 40 };
|
||||
s32 gZerop_ad = 239;
|
||||
u32 gTurn_offv = 100;
|
||||
u8 gCalib_flag = 0;
|
||||
vu16 gMeas_cnt = 0;/* Measure*/
|
||||
u32 gKey_in;
|
||||
u8 gLongkey_flag = 0;
|
||||
u8 gAlarm_type = 1;
|
||||
/*******************************************************************************
|
||||
<20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD>: Get_CalFlag
|
||||
<20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>:<3A><>ȡУ״̬
|
||||
<20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>:NULL
|
||||
<20><><EFBFBD>ز<EFBFBD><D8B2><EFBFBD>:У״̬<D7B4><CCAC>־
|
||||
*******************************************************************************/
|
||||
u32 Get_CalFlag(void) {
|
||||
return gCalib_flag;
|
||||
}
|
||||
|
||||
/*******************************************************************************
|
||||
<20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD>: Get_gKey
|
||||
<20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>:<3A><>ȡ<EFBFBD><C8A1><EFBFBD><EFBFBD>״̬
|
||||
<20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>:NULL
|
||||
<20><><EFBFBD>ز<EFBFBD><D8B2><EFBFBD>:<3A><><EFBFBD><EFBFBD>״̬
|
||||
*******************************************************************************/
|
||||
u32 Get_gKey(void) {
|
||||
return gKey_in;
|
||||
}
|
||||
/*******************************************************************************
|
||||
<20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD>: Set_gKey
|
||||
<20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>:<3A><><EFBFBD>ð<EFBFBD><C3B0><EFBFBD>״̬
|
||||
<20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>:Ҫ<><D2AA><EFBFBD>õİ<C3B5><C4B0><EFBFBD>״̬
|
||||
<20><><EFBFBD>ز<EFBFBD><D8B2><EFBFBD>:NULL
|
||||
*******************************************************************************/
|
||||
void Set_gKey(u32 key) {
|
||||
gKey_in = key;
|
||||
}
|
||||
/*******************************************************************************
|
||||
<20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD>: Set_LongKeyFlag
|
||||
<20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>:<3A><><EFBFBD>ó<EFBFBD><C3B3><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>־
|
||||
<20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>:0 :<3A><><EFBFBD><EFBFBD><EFBFBD>Գ<EFBFBD><D4B3><EFBFBD><EFBFBD><EFBFBD> 1: <20><><EFBFBD>Գ<EFBFBD><D4B3><EFBFBD>
|
||||
<20><><EFBFBD>ز<EFBFBD><D8B2><EFBFBD>:NULL
|
||||
*******************************************************************************/
|
||||
void Set_LongKeyFlag(u32 flag) {
|
||||
gLongkey_flag = flag;
|
||||
}
|
||||
/*******************************************************************************
|
||||
<20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD>: Get_AlarmType
|
||||
<20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>:<3A><>ȡ<EFBFBD><C8A1><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
|
||||
<20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>:NULL
|
||||
<20><><EFBFBD>ز<EFBFBD><D8B2><EFBFBD>: <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
|
||||
0:<3A><><EFBFBD><EFBFBD>
|
||||
1:sensor - err
|
||||
2:<3A><><EFBFBD><EFBFBD>
|
||||
3:<3A><>ѹ
|
||||
*******************************************************************************/
|
||||
u8 Get_AlarmType(void) {
|
||||
return gAlarm_type;
|
||||
}
|
||||
/*******************************************************************************
|
||||
<20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD>: Set_AlarmType
|
||||
<20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>:<3A><><EFBFBD>ñ<EFBFBD><C3B1><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
|
||||
<20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>: <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
|
||||
0:<3A><><EFBFBD><EFBFBD>
|
||||
1:sen - err
|
||||
2:<3A><><EFBFBD><EFBFBD>
|
||||
3:<3A><>ѹ
|
||||
<20><><EFBFBD>ز<EFBFBD><D8B2><EFBFBD>:NULL
|
||||
*******************************************************************************/
|
||||
void Set_AlarmType(u8 type) {
|
||||
gAlarm_type = type;
|
||||
}
|
||||
/*******************************************************************************
|
||||
Function: Read_Vb
|
||||
Description:Reads the input voltage and compares it to the thresholds??
|
||||
Input:Selects which threshold we are comparing to
|
||||
Output:Returns a key for if the voltage is in spec (I think)
|
||||
*******************************************************************************/
|
||||
int Read_Vb(u8 flag) {
|
||||
u32 tmp, i, sum = 0;
|
||||
|
||||
for (i = 0; i < 10; i++) {
|
||||
tmp = ADC_GetConversionValue(ADC2);
|
||||
sum += tmp;
|
||||
}
|
||||
tmp = sum / 10;
|
||||
if (tmp >= (gVol[0] + gVol[0] / 100)) {
|
||||
gAlarm_type = HIGH_VOLTAGE;
|
||||
return H_ALARM; //<2F><><EFBFBD><EFBFBD>3500
|
||||
}
|
||||
tmp = (tmp * 10 / 144); //<2F><>ѹvb = 3.3 * 85 *ad / 40950
|
||||
|
||||
for (i = 0; i < 4; i++) {
|
||||
if (i == 2) {
|
||||
if (flag == 0) {
|
||||
if (tmp >= gRate[i])
|
||||
break;
|
||||
} else {
|
||||
if (tmp >= gTurn_offv)
|
||||
break;
|
||||
}
|
||||
} else {
|
||||
if (tmp >= gRate[i])
|
||||
break;
|
||||
}
|
||||
}
|
||||
return (i + 1);
|
||||
}
|
||||
/*******************************************************************************
|
||||
<20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD>: Scan_Key
|
||||
<20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>:ɨ<><C9A8><EFBFBD><EFBFBD><EFBFBD>(50msÿ<73><C3BF>)
|
||||
<20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>:NULL
|
||||
<20><><EFBFBD>ز<EFBFBD><D8B2><EFBFBD>:NULL
|
||||
*******************************************************************************/
|
||||
void Scan_Key(void) {
|
||||
static u32 p_cnt = 0, key_statuslast = 0;
|
||||
u32 key_state = 0;
|
||||
|
||||
if ((~GPIOA->IDR) & 0x0200)
|
||||
key_state |= KEY_V1; //KEY_V1
|
||||
if ((~GPIOA->IDR) & 0x0040)
|
||||
key_state |= KEY_V2; //KEY_V2
|
||||
|
||||
if (key_state == 0)
|
||||
return;
|
||||
|
||||
if (gLongkey_flag == 1) { //LongKey_flag :<3A><><EFBFBD>Ƴ<EFBFBD><C6B3><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>־
|
||||
if (key_statuslast == key_state) {
|
||||
p_cnt++;
|
||||
if (p_cnt > 21)
|
||||
Set_gKey(KEY_CN | key_state); //<2F><><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
|
||||
} else {
|
||||
p_cnt = 0;
|
||||
key_statuslast = key_state;
|
||||
Set_gKey(key_state);
|
||||
}
|
||||
} else {
|
||||
p_cnt = 0;
|
||||
key_statuslast = key_state;
|
||||
Set_gKey(key_state);
|
||||
}
|
||||
|
||||
}
|
||||
|
||||
/*******************************************************************************
|
||||
<20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD>: Get_SlAvg
|
||||
<20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>:<3A><><EFBFBD><EFBFBD>ƽ<EFBFBD><C6BD>ֵ
|
||||
<20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>:avg_data ƽ<><C6BD><EFBFBD><EFBFBD>ADֵ
|
||||
<20><><EFBFBD>ز<EFBFBD><D8B2><EFBFBD>:<3A><><EFBFBD><EFBFBD>ƽ<EFBFBD><C6BD>ֵ
|
||||
*******************************************************************************/
|
||||
u32 Get_SlAvg(u32 avg_data) {
|
||||
static u32 sum_avg = 0;
|
||||
static u8 init_flag = 0;
|
||||
u16 si_avg = sum_avg / SI_COE, abs;
|
||||
|
||||
if (init_flag == 0) { /*<2A><>һ<EFBFBD><D2BB><EFBFBD>ϵ<EFBFBD>*/
|
||||
sum_avg = SI_COE * avg_data;
|
||||
init_flag = 1;
|
||||
return sum_avg / SI_COE;
|
||||
}
|
||||
if (avg_data > si_avg)
|
||||
abs = avg_data - si_avg;
|
||||
else
|
||||
abs = si_avg - avg_data;
|
||||
|
||||
if (abs > SI_THRESHOLD)
|
||||
sum_avg = SI_COE * avg_data;
|
||||
else
|
||||
sum_avg += avg_data - sum_avg / SI_COE;
|
||||
|
||||
return sum_avg / SI_COE;
|
||||
}
|
||||
|
||||
/*******************************************************************************
|
||||
Function:
|
||||
Description: Read the thermocouple in the soldering iron head
|
||||
Output:Soldering Iron temperature
|
||||
*******************************************************************************/
|
||||
u32 Get_AvgAd(void) {
|
||||
/*The head has a thermocouple inline with the heater
|
||||
This is read by turning off the heater
|
||||
Then read the output of the op-amp that is connected across the connections
|
||||
*/
|
||||
static u32 ad_sum = 0;
|
||||
static u32 max = 0, min = 5000;
|
||||
u32 ad_value, avg_data, slide_data = 0;
|
||||
|
||||
Set_HeatingTime(0); //set the remaining time to zero
|
||||
HEAT_OFF(); //heater must be off
|
||||
Delay_HalfMs(25); //wait for the heater to time out
|
||||
gMeas_cnt = 10; //how many measurements to make
|
||||
|
||||
while (gMeas_cnt > 0) {
|
||||
ad_value = Get_AdcValue(0); //Read_Tmp();
|
||||
ad_sum += ad_value;
|
||||
if (ad_value > max)
|
||||
max = ad_value;
|
||||
if (ad_value < min)
|
||||
min = ad_value;
|
||||
|
||||
if (gMeas_cnt == 1) { //We have just taken the last reading
|
||||
ad_sum = ad_sum - max - min; //remove the two outliers
|
||||
avg_data = ad_sum / 8; //take the average
|
||||
|
||||
slide_data = Get_SlAvg(avg_data);
|
||||
ad_sum = 0;
|
||||
min = 5000;
|
||||
max = 0;
|
||||
}
|
||||
gMeas_cnt--;
|
||||
}
|
||||
return slide_data; //gSlide_data;
|
||||
}
|
||||
|
||||
/*******************************************************************************
|
||||
Function:
|
||||
Description:
|
||||
*******************************************************************************/
|
||||
int Get_TempSlAvg(int avg_data) {
|
||||
static int sum_avg = 0;
|
||||
static u8 init_flag = 0;
|
||||
|
||||
if (init_flag == 0) {
|
||||
sum_avg = 8 * avg_data;
|
||||
init_flag = 1;
|
||||
return sum_avg / 8;
|
||||
}
|
||||
|
||||
sum_avg += avg_data - sum_avg / 8;
|
||||
|
||||
return sum_avg / 8;
|
||||
}
|
||||
|
||||
/*******************************************************************************
|
||||
Function:
|
||||
Description:Reads the temperature of the on board temp sensor for calibration
|
||||
http://www.analog.com/media/en/technical-documentation/data-sheets/TMP35_36_37.pdf
|
||||
Output: The onboardTemp in C
|
||||
*******************************************************************************/
|
||||
int Get_SensorTmp(void) {
|
||||
u32 ad_sum = 0;
|
||||
u32 max = 0, min = 5000;
|
||||
u32 ad_value, avg_data, slide_data;
|
||||
int sensor_temp = 0;
|
||||
|
||||
gMeas_cnt = 10;
|
||||
|
||||
while (gMeas_cnt > 0) {
|
||||
ad_value = Get_AdcValue(1);
|
||||
ad_sum += ad_value;
|
||||
if (ad_value > max)
|
||||
max = ad_value;
|
||||
if (ad_value < min)
|
||||
min = ad_value;
|
||||
|
||||
if (gMeas_cnt == 1) {
|
||||
ad_sum = ad_sum - max - min;
|
||||
avg_data = ad_sum / 8;
|
||||
//^ Removes the two outliers from the data spread
|
||||
slide_data = Get_TempSlAvg(avg_data);
|
||||
sensor_temp = (250 + (3300 * slide_data / 4096) - 750); //(25 + ((10*(33*gSlide_data)/4096)-75));
|
||||
//^ Convert the reading to C
|
||||
ad_sum = 0;
|
||||
min = 5000;
|
||||
max = 0;
|
||||
}
|
||||
gMeas_cnt--;
|
||||
}
|
||||
return sensor_temp;
|
||||
}
|
||||
|
||||
/*******************************************************************************
|
||||
Function:
|
||||
Description: Reads the Zero Temp.. And does something..
|
||||
*******************************************************************************/
|
||||
void Zero_Calibration(void) {
|
||||
u32 zerop;
|
||||
int cool_tmp;
|
||||
|
||||
zerop = Get_AvgAd(); //get the current
|
||||
cool_tmp = Get_SensorTmp(); //get the temp of the onboard sensor
|
||||
|
||||
if (zerop >= 400) { //If the tip is too hot abort
|
||||
gCalib_flag = 2;
|
||||
} else {
|
||||
if (cool_tmp < 300) { //If cool temp is cool enough continue
|
||||
gZerop_ad = zerop; //store the zero point
|
||||
gCalib_flag = 1;
|
||||
} else { //abort if too warm
|
||||
gCalib_flag = 2;
|
||||
}
|
||||
}
|
||||
}
|
||||
/*******************************************************************************
|
||||
<20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD>: Get_Temp
|
||||
<20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>:<3A><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>,<2C>ȶ<EFBFBD><C8B6>¶<EFBFBD>,<2C><><EFBFBD><EFBFBD>AD<41><44><EFBFBD><EFBFBD><EFBFBD>¶<EFBFBD>
|
||||
<20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>:wk_temp <20><><EFBFBD><EFBFBD><EFBFBD>¶<EFBFBD>
|
||||
<20><><EFBFBD>ز<EFBFBD><D8B2><EFBFBD>:ʵ<><CAB5><EFBFBD>¶<EFBFBD>
|
||||
*******************************************************************************/
|
||||
s16 Get_Temp(s16 wk_temp) {
|
||||
int ad_value, cool_tmp, compensation = 0;
|
||||
static u16 cnt = 0, h_cnt = 0;
|
||||
|
||||
ad_value = Get_AvgAd();
|
||||
cool_tmp = Get_SensorTmp();
|
||||
|
||||
if (ad_value == 4095)
|
||||
h_cnt++;
|
||||
else {
|
||||
h_cnt = 0;
|
||||
if (ad_value > 3800 && ad_value < 4095)
|
||||
cnt++;
|
||||
else
|
||||
cnt = 0;
|
||||
}
|
||||
if (h_cnt >= 60 && cnt == 0)
|
||||
gAlarm_type = SEN_ERR; //Sensor error -- too many invalid readings
|
||||
if (h_cnt == 0 && cnt >= 10)
|
||||
gAlarm_type = HIGH_TEMP; //Stuck at a really high temp -> Has mosfet failed
|
||||
if (h_cnt < 60 && cnt < 10)
|
||||
gAlarm_type = NORMAL_TEMP; //No errors so far
|
||||
|
||||
compensation = 80 + 150 * (wk_temp - 1000) / 3000;
|
||||
if (wk_temp == 1000)
|
||||
compensation -= 10;
|
||||
|
||||
if (wk_temp != 0) {
|
||||
if (ad_value > (compensation + gZerop_ad))
|
||||
ad_value -= compensation;
|
||||
}
|
||||
if (cool_tmp > 400)
|
||||
cool_tmp = 400; //cap cool temp at 40C
|
||||
|
||||
return (ad_value * 1000 + 806 * cool_tmp - gZerop_ad * 1000) / 806;
|
||||
}
|
||||
|
||||
/*******************************************************************************
|
||||
Function:Start_Watchdog
|
||||
Description: Starts the system watchdog timer
|
||||
*******************************************************************************/
|
||||
u32 Start_Watchdog(u32 ms) {
|
||||
IWDG_WriteAccessCmd(IWDG_WriteAccess_Enable);
|
||||
|
||||
/* IWDG counter clock: 40KHz(LSI) / 32 = 1.25 KHz (min:0.8ms -- max:3276.8ms */
|
||||
IWDG_SetPrescaler(IWDG_Prescaler_32);
|
||||
|
||||
/* Set counter reload value to XXms */
|
||||
IWDG_SetReload(ms * 10 / 8);
|
||||
|
||||
/* Reload IWDG counter */
|
||||
IWDG_ReloadCounter();
|
||||
|
||||
/* Enable IWDG (the LSI oscillator will be enabled by hardware) */
|
||||
IWDG_Enable();
|
||||
return 1;
|
||||
}
|
||||
/*******************************************************************************
|
||||
Function:Clear_Watchdog
|
||||
Description:Resets the watchdog timer
|
||||
*******************************************************************************/
|
||||
void Clear_Watchdog(void) {
|
||||
IWDG_ReloadCounter();
|
||||
|
||||
}
|
||||
/******************************** END OF FILE *********************************/
|
||||
@@ -1,14 +1,18 @@
|
||||
/********************* (C) COPYRIGHT 2015 e-Design Co.,Ltd. *******************/
|
||||
/* Brief : Interrupt Service Routines Author : bure */
|
||||
/******************************************************************************/
|
||||
#include "Interrupt.h"
|
||||
#include "usb_istr.h"
|
||||
#include "Bios.h"
|
||||
#include "I2C.h"
|
||||
|
||||
/******************************************************************************/
|
||||
/* Processor Exceptions Handlers */
|
||||
/******************************************************************************/
|
||||
volatile uint32_t system_Ticks;
|
||||
volatile uint32_t lastKeyPress; //millis() at the last button event
|
||||
volatile uint16_t keyState; //tracks the button status
|
||||
volatile uint32_t lastMovement; //millis() at last movement event
|
||||
|
||||
//Delay in milliseconds using systemTick
|
||||
void delayMs(uint32_t ticks) {
|
||||
uint32_t endtime = ticks + millis();
|
||||
while (millis() < endtime)
|
||||
;
|
||||
}
|
||||
|
||||
void NMI_Handler(void) {
|
||||
;
|
||||
@@ -34,6 +38,160 @@ void UsageFault_Handler(void) {
|
||||
;
|
||||
}
|
||||
|
||||
//Handles the tick of the sysTick events
|
||||
void SysTick_Handler(void) {
|
||||
++system_Ticks;
|
||||
}
|
||||
|
||||
/*Peripheral Interrupts */
|
||||
|
||||
void TIM3_IRQHandler(void) {
|
||||
TIM3_ISR();
|
||||
}
|
||||
|
||||
//EXTI IRQ handler
|
||||
//used for buttons and movement
|
||||
void EXTI9_5_IRQHandler(void) {
|
||||
//we are interested in line 9 and line 6 for buttons
|
||||
//Lien 5 == movement
|
||||
if (EXTI_GetITStatus(EXTI_Line9) != RESET) {
|
||||
if (GPIO_ReadInputDataBit(GPIOA, KEY_A) == SET)
|
||||
keyState &= ~(BUT_A);
|
||||
else
|
||||
keyState |= BUT_A;
|
||||
lastKeyPress = millis();
|
||||
EXTI_ClearITPendingBit(EXTI_Line9);
|
||||
} else if (EXTI_GetITStatus(EXTI_Line6) != RESET) {
|
||||
if (GPIO_ReadInputDataBit(GPIOA, KEY_B) == SET)
|
||||
keyState &= ~(BUT_B);
|
||||
else
|
||||
keyState |= BUT_B;
|
||||
lastKeyPress = millis();
|
||||
EXTI_ClearITPendingBit(EXTI_Line6);
|
||||
} else if (EXTI_GetITStatus(EXTI_Line5) != RESET) { //Movement Event
|
||||
lastMovement = millis();
|
||||
EXTI_ClearITPendingBit(EXTI_Line5);
|
||||
}
|
||||
|
||||
}
|
||||
|
||||
/*********************** UNUSED IRQ *****************************************/
|
||||
void WWDG_IRQHandler(void) {
|
||||
}
|
||||
void PVD_IRQHandler(void) {
|
||||
}
|
||||
void TAMPER_IRQHandler(void) {
|
||||
}
|
||||
void RTC_IRQHandler(void) {
|
||||
}
|
||||
void FLASH_IRQHandler(void) {
|
||||
}
|
||||
void RCC_IRQHandler(void) {
|
||||
}
|
||||
void EXTI0_IRQHandler(void) {
|
||||
}
|
||||
void EXTI1_IRQHandler(void) {
|
||||
}
|
||||
void EXTI2_IRQHandler(void) {
|
||||
}
|
||||
void EXTI3_IRQHandler(void) {
|
||||
}
|
||||
void EXTI4_IRQHandler(void) {
|
||||
}
|
||||
void DMA1_Channel1_IRQHandler(void) {
|
||||
}
|
||||
void DMA1_Channel2_IRQHandler(void) {
|
||||
}
|
||||
void DMA1_Channel3_IRQHandler(void) {
|
||||
}
|
||||
void DMA1_Channel4_IRQHandler(void) {
|
||||
}
|
||||
void DMA1_Channel5_IRQHandler(void) {
|
||||
}
|
||||
void DMA1_Channel6_IRQHandler(void) {
|
||||
}
|
||||
void DMA1_Channel7_IRQHandler(void) {
|
||||
}
|
||||
void ADC1_2_IRQHandler(void) {
|
||||
}
|
||||
void USB_HP_CAN1_TX_IRQHandler(void) {
|
||||
}
|
||||
void CAN1_RX1_IRQHandler(void) {
|
||||
}
|
||||
void CAN1_SCE_IRQHandler(void) {
|
||||
}
|
||||
|
||||
void TIM1_BRK_IRQHandler(void) {
|
||||
}
|
||||
void TIM1_UP_IRQHandler(void) {
|
||||
}
|
||||
void TIM1_TRG_COM_IRQHandler(void) {
|
||||
}
|
||||
void TIM1_CC_IRQHandler(void) {
|
||||
}
|
||||
void TIM4_IRQHandler(void) {
|
||||
}
|
||||
void I2C1_EV_IRQHandler(void) {
|
||||
}
|
||||
void I2C1_ER_IRQHandler(void) {
|
||||
}
|
||||
void I2C2_EV_IRQHandler(void) {
|
||||
}
|
||||
void I2C2_ER_IRQHandler(void) {
|
||||
}
|
||||
void SPI1_IRQHandler(void) {
|
||||
}
|
||||
void SPI2_IRQHandler(void) {
|
||||
}
|
||||
void USART1_IRQHandler(void) {
|
||||
}
|
||||
void USART2_IRQHandler(void) {
|
||||
}
|
||||
void USART3_IRQHandler(void) {
|
||||
}
|
||||
void EXTI15_10_IRQHandler(void) {
|
||||
}
|
||||
void RTCAlarm_IRQHandler(void) {
|
||||
}
|
||||
void USBWakeUp_IRQHandler(void) {
|
||||
}
|
||||
void TIM8_BRK_IRQHandler(void) {
|
||||
}
|
||||
void TIM8_UP_IRQHandler(void) {
|
||||
}
|
||||
void TIM8_TRG_COM_IRQHandler(void) {
|
||||
}
|
||||
void TIM8_CC_IRQHandler(void) {
|
||||
}
|
||||
void ADC3_IRQHandler(void) {
|
||||
}
|
||||
void FSMC_IRQHandler(void) {
|
||||
}
|
||||
void SDIO_IRQHandler(void) {
|
||||
}
|
||||
void TIM5_IRQHandler(void) {
|
||||
}
|
||||
void SPI3_IRQHandler(void) {
|
||||
}
|
||||
void UART4_IRQHandler(void) {
|
||||
}
|
||||
void UART5_IRQHandler(void) {
|
||||
}
|
||||
void TIM6_IRQHandler(void) {
|
||||
}
|
||||
void TIM7_IRQHandler(void) {
|
||||
}
|
||||
void DMA2_Channel1_IRQHandler(void) {
|
||||
}
|
||||
void DMA2_Channel2_IRQHandler(void) {
|
||||
}
|
||||
void DMA2_Channel3_IRQHandler(void) {
|
||||
}
|
||||
void DMA2_Channel4_5_IRQHandler(void) {
|
||||
}
|
||||
void TIM2_IRQHandler(void) {
|
||||
|
||||
}
|
||||
void SVC_Handler(void) {
|
||||
}
|
||||
|
||||
@@ -43,32 +201,8 @@ void DebugMon_Handler(void) {
|
||||
void PendSV_Handler(void) {
|
||||
}
|
||||
|
||||
void SysTick_Handler(void) {
|
||||
}
|
||||
|
||||
/******************************************************************************/
|
||||
/* Peripherals Interrupt Handlers */
|
||||
/* Add here the Interrupt Handler for the used peripheral(s) (PPP), for the */
|
||||
/* available peripheral interrupt handler's name please refer to the startup */
|
||||
/* file (startup_stm32f30x.s). */
|
||||
/******************************************************************************/
|
||||
|
||||
void USB_LP_CAN1_RX0_IRQHandler(void) {
|
||||
USB_Istr();
|
||||
}
|
||||
void TIM2_IRQHandler(void) {
|
||||
TIM2_ISR();
|
||||
}
|
||||
|
||||
void TIM3_IRQHandler(void) {
|
||||
TIM3_ISR();
|
||||
}
|
||||
/*This loop is used for un assigned IRQ's so that the debugger can catch them*/
|
||||
static void forever()
|
||||
|
||||
{
|
||||
for (;;)
|
||||
;
|
||||
}
|
||||
|
||||
/********************************* END OF FILE ******************************/
|
||||
|
||||
@@ -1,252 +1,47 @@
|
||||
/********************* (C) COPYRIGHT 2015 e-Design Co.,Ltd. **********************
|
||||
File Name : MMA8652FC.c
|
||||
Version : S100 APP Ver 2.11
|
||||
Description:
|
||||
Author : Celery
|
||||
Data: 2015/07/07
|
||||
History:
|
||||
2016/09/13 Ben V. Brown - English comments and fixing a few errors
|
||||
2015/07/07 ͳһ<CDB3><D2BB><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
|
||||
*******************************************************************************/
|
||||
/*
|
||||
* MMA8652FC.*
|
||||
* Files for the built in accelerometer from NXP.
|
||||
* This sets the unit up in motion detection mode with an interrupt on movement
|
||||
* This interrupt is fed to PB5 which catches it via EXTI5
|
||||
*
|
||||
* http://cache.freescale.com/files/sensors/doc/data_sheet/MMA8652FC.pdf
|
||||
*
|
||||
* EXTI Motion config setup values lifted from AN4070from NXP
|
||||
*
|
||||
* Ben V. Brown - <ralim@ralimtek.com>
|
||||
*/
|
||||
#include <stdio.h>
|
||||
#include <string.h>
|
||||
#include "APP_Version.h"
|
||||
#include "Bios.h"
|
||||
#include "Oled.h"
|
||||
#include "MMA8652FC.h"
|
||||
#include "I2C.h"
|
||||
#include "CTRL.h"
|
||||
#include "UI.h"
|
||||
//------------------------------------------------------------------//
|
||||
|
||||
static int IIC_RegWrite(u8 reg, u8 data);
|
||||
static int IIC_RegRead(u8 reg);
|
||||
static int Read_ZYXDr(void);
|
||||
|
||||
u16 gactive = 0, gShift = 0;
|
||||
u8 gMmatxdata;
|
||||
|
||||
typedef struct {
|
||||
u8 hi;
|
||||
u8 lo;
|
||||
|
||||
} DR_Value;
|
||||
|
||||
DR_Value gX_value, gY_value, gZ_value;
|
||||
|
||||
/*******************************************************************************
|
||||
Function:
|
||||
Description:Returns if the unit is actively being moved
|
||||
Output: if the unit is active or not.
|
||||
*******************************************************************************/
|
||||
u16 Get_MmaActive(void) {
|
||||
return gactive;
|
||||
}
|
||||
/*******************************************************************************
|
||||
Function: Get_MmaActive
|
||||
Description:Returns if movement has occured (0==still,1==movement)
|
||||
*******************************************************************************/
|
||||
u16 Get_MmaShift(void) {
|
||||
return gShift;
|
||||
}
|
||||
/*******************************************************************************
|
||||
Function: Set_MmaShift
|
||||
Description: Set the Shift Value
|
||||
Input: shift value
|
||||
*******************************************************************************/
|
||||
void Set_MmaShift(u16 shift) {
|
||||
gShift = shift;
|
||||
}
|
||||
|
||||
/*******************************************************************************
|
||||
Function:IIC_RegWrite
|
||||
Description:Writes a value to a register
|
||||
Input:the register, the data
|
||||
Output: 1 if the write succeeded
|
||||
*******************************************************************************/
|
||||
int IIC_RegWrite(u8 reg, u8 data) {
|
||||
u8 tx_data[20];
|
||||
|
||||
void I2C_RegisterWrite(uint8_t reg, uint8_t data) {
|
||||
u8 tx_data[2];
|
||||
tx_data[0] = reg;
|
||||
tx_data[1] = data;
|
||||
I2C_PageWrite(tx_data, 2, DEVICE_ADDR);
|
||||
return 1;
|
||||
|
||||
}
|
||||
/*******************************************************************************
|
||||
Function:IIC_RegRead
|
||||
Description: Reads a register from I2C, using a single byte addressing scheme
|
||||
Inputs: uint8_t register to read
|
||||
Output: 1 if the read worked.
|
||||
*******************************************************************************/
|
||||
int IIC_RegRead(u8 reg) {
|
||||
u8 tx_data[20];
|
||||
|
||||
uint8_t I2C_RegisterRead(uint8_t reg) {
|
||||
u8 tx_data[3];
|
||||
tx_data[0] = reg;
|
||||
|
||||
I2C_PageRead(tx_data, 1, DEVICE_ADDR, reg);
|
||||
gMmatxdata = tx_data[0];
|
||||
return 1;
|
||||
}
|
||||
/*******************************************************************************
|
||||
Function: MMA865x_Standby
|
||||
Description: Put the MMA865 into standby mode
|
||||
*******************************************************************************/
|
||||
void MMA865x_Standby(void) {
|
||||
//Put the sensor into Standby Mode by clearing
|
||||
// the Active bit of the System Control 1 Register
|
||||
IIC_RegWrite(CTRL_REG1, 0); //(IIC_RegRead(CTRL_REG1) & ~ ACTIVE_MASK)
|
||||
}
|
||||
/*******************************************************************************
|
||||
Function: MMA865x_Active
|
||||
Description: Put the MMA865 into active mode
|
||||
*******************************************************************************/
|
||||
void MMA865x_Active(void) {
|
||||
// Put the sensor into Active Mode by setting the
|
||||
// Active bit of the System Control 1 Register
|
||||
IIC_RegWrite(CTRL_REG1, ACTIVE_MASK); //(IIC_RegRead(CTRL_REG1) | ACTIVE_MASK)
|
||||
}
|
||||
/*******************************************************************************
|
||||
Function: IIC_RegRead
|
||||
Description:Setup the MMA865x IC settings
|
||||
*******************************************************************************/
|
||||
void StartUp_Accelerated(void) {
|
||||
//Put the unit into standby state so we can edit its configuration registers
|
||||
MMA865x_Standby();
|
||||
//Set the unit to full scale measurement
|
||||
IIC_RegWrite(XYZ_DATA_CFG_REG, FULL_SCALE_8G); //(IIC_RegRead(XYZ_DATA_CFG_REG) & ~FS_MASK)
|
||||
//Set the unit to the required update rate (eg 100Hz)
|
||||
IIC_RegWrite(CTRL_REG1, DataRateValue); //IIC_RegRead(CTRL_REG1)|
|
||||
return tx_data[0];
|
||||
|
||||
IIC_RegWrite(CTRL_REG2, 0); //Normal mode
|
||||
|
||||
//Change the unit back to active mode to exit setup and start the readings
|
||||
MMA865x_Active();
|
||||
}
|
||||
|
||||
/*******************************************************************************
|
||||
Function: Read_ZYXDr
|
||||
Description:
|
||||
Output: 1 if new data, 0 if not
|
||||
*******************************************************************************/
|
||||
int Read_ZYXDr(void) {
|
||||
u8 reg_flag;
|
||||
u8 ptr, i;
|
||||
u8 value[6] = { 0, 0, 0, 0, 0, 0 };
|
||||
//Poll the ZYXDR status bit and wait for it to set
|
||||
if (IIC_RegRead(STATUS_REG)) { //check we can read the status
|
||||
reg_flag = gMmatxdata;
|
||||
if ((reg_flag & ZYXDR_BIT) != 0) { //if new measurement
|
||||
//Read 12/10-bit XYZ results using a 6 byte IIC access
|
||||
ptr = X_MSB_REG;
|
||||
for (i = 0; i < 6; i++) {
|
||||
if (IIC_RegRead(ptr++) == 0)
|
||||
break;
|
||||
void StartUp_Acceleromter(void) {
|
||||
|
||||
value[i] = gMmatxdata;
|
||||
//Copy and save each result as a 16-bit left-justified value
|
||||
gX_value.hi = value[0];
|
||||
gX_value.lo = value[1];
|
||||
gY_value.hi = value[2];
|
||||
gY_value.lo = value[3];
|
||||
gZ_value.hi = value[4];
|
||||
gZ_value.lo = value[5];
|
||||
return 1;
|
||||
}
|
||||
} else
|
||||
return 0;
|
||||
}
|
||||
return 0;
|
||||
I2C_RegisterWrite(CTRL_REG2, 0); //Normal mode
|
||||
I2C_RegisterWrite( CTRL_REG2, 0x40); // Reset all registers to POR values
|
||||
delayMs(2); // ~1ms delay
|
||||
I2C_RegisterWrite(FF_MT_CFG_REG, 0x78);// Enable motion detection for X and Y axis, latch enabled
|
||||
I2C_RegisterWrite(FF_MT_THS_REG, 0x0F); // Set threshold
|
||||
I2C_RegisterWrite(FF_MT_COUNT_REG, 0x01); // Set debounce to 100ms
|
||||
|
||||
I2C_RegisterWrite( CTRL_REG4, 0x04); // Enable motion interrupt
|
||||
I2C_RegisterWrite( CTRL_REG5, 0x04); // Route motion interrupts to INT1 ->PB5 ->EXTI
|
||||
I2C_RegisterWrite( CTRL_REG1, 0x19); // ODR=100 Hz, Active mode
|
||||
}
|
||||
/*******************************************************************************
|
||||
Function: Cheak_XYData
|
||||
Description: Check the input X,Y for a large enough acceleration to wake the unit
|
||||
Inputs:x0,y0,x1,y1 to check
|
||||
Output: if the unit is active
|
||||
*******************************************************************************/
|
||||
u16 Cheak_XYData(u16 x0, u16 y0, u16 x1, u16 y1) {
|
||||
u16 active = 0;
|
||||
gShift = 0;
|
||||
|
||||
if ((x1 > (x0 + 32)) || (x1 < (x0 - 32)))
|
||||
gShift = 1;
|
||||
if ((y1 > (y0 + 32)) || (y1 < (y0 - 32)))
|
||||
gShift = 1;
|
||||
|
||||
if ((x1 > (x0 + 16)) || (x1 < (x0 - 16)))
|
||||
active = 1;
|
||||
if ((y1 > (y0 + 16)) || (y1 < (y0 - 16)))
|
||||
active = 1;
|
||||
|
||||
return active;
|
||||
}
|
||||
/*******************************************************************************
|
||||
Function: Update_X
|
||||
Description: Converts the read value for x into an actual properly located value
|
||||
Output: X
|
||||
*******************************************************************************/
|
||||
u16 Update_X(void) {
|
||||
u16 value, x;
|
||||
|
||||
value = ((gX_value.hi << 8) | (gX_value.lo & 0xf0)) >> 4;
|
||||
if (gX_value.hi > 0x7f)
|
||||
x = (~value + 1) & 0xfff;
|
||||
else
|
||||
x = value & 0xfff;
|
||||
|
||||
return x;
|
||||
}
|
||||
/*******************************************************************************
|
||||
Function: Update_Y
|
||||
Description: Converts the read value for y into an actual properly located value
|
||||
Output: Y
|
||||
*******************************************************************************/
|
||||
u16 Update_Y(void) {
|
||||
u16 value, y;
|
||||
|
||||
value = ((gY_value.hi << 8) | (gY_value.lo & 0xf0)) >> 4;
|
||||
if (gY_value.hi > 0x7f)
|
||||
y = (~value + 1) & 0xfff;
|
||||
else
|
||||
y = value & 0xfff;
|
||||
|
||||
return y;
|
||||
}
|
||||
/*******************************************************************************
|
||||
Function: Update_Z
|
||||
Description: Converts the read value for z into an actual properly located value
|
||||
Output: Z
|
||||
*******************************************************************************/
|
||||
u16 Update_Z(void) {
|
||||
u16 value, z;
|
||||
|
||||
value = ((gZ_value.hi << 8) | (gZ_value.lo & 0xf0)) >> 4;
|
||||
if (gZ_value.hi > 0x7f)
|
||||
z = (~value + 1) & 0xfff;
|
||||
else
|
||||
z = value & 0xfff;
|
||||
|
||||
return z;
|
||||
}
|
||||
/*******************************************************************************
|
||||
Function: Check_Accelerated
|
||||
Description:Check if the unit has moved
|
||||
*******************************************************************************/
|
||||
void Check_Accelerated(void) {
|
||||
static u16 x0 = 0, y0 = 0;
|
||||
u16 x1, y1;
|
||||
|
||||
if (Read_ZYXDr()) { //Read the new values from the accelerometer
|
||||
x1 = Update_X(); //convert the values into usable form
|
||||
y1 = Update_Y();
|
||||
} else {
|
||||
x1 = x0;
|
||||
y1 = y0; //use old values
|
||||
gactive = 0;
|
||||
return;
|
||||
}
|
||||
|
||||
gactive = Cheak_XYData(x0, y0, x1, y1); //gactive == If the unit is moving or not
|
||||
|
||||
x0 = x1;
|
||||
y0 = y1;
|
||||
}
|
||||
/******************************** END OF FILE *********************************/
|
||||
|
||||
@@ -11,53 +11,43 @@
|
||||
#include <string.h>
|
||||
#include <stdio.h>
|
||||
#include "APP_Version.h"
|
||||
#include "Disk.h"
|
||||
#include "Modes.h"
|
||||
#include "Bios.h"
|
||||
#include "usb_lib.h"
|
||||
#include "I2C.h"
|
||||
#include "Flash.h"
|
||||
#include "MMA8652FC.h"
|
||||
#include "UI.h"
|
||||
#include "PID.h"
|
||||
#include "Oled.h"
|
||||
#include "CTRL.h"
|
||||
#include "Hardware.h"
|
||||
#include "Interrupt.h"
|
||||
|
||||
int main(void) {
|
||||
RCC_Config(); //setup system clock
|
||||
NVIC_Config(0x4000);
|
||||
Init_Timer2(); //init the timers
|
||||
Init_Timer3();
|
||||
GPIO_Config();//setup all the GPIO pins
|
||||
//NVIC_Config(0x4000);//this shifts the NVIC table to be offset
|
||||
NVIC_Config(0x0000);
|
||||
GPIO_Config(); //setup all the GPIO pins
|
||||
Init_EXTI();
|
||||
//Init_Timer2(); //init the timers
|
||||
|
||||
USB_Port(DISABLE);//disable the USB hardware
|
||||
Delay_Ms(200);//pause to let hardware stabilize
|
||||
USB_Port(ENABLE);//enable the USB hardware
|
||||
USB_Init();
|
||||
Init_Timer3();
|
||||
I2C_Configuration(); //init the i2c bus
|
||||
|
||||
Adc_Init(); //init adc and dma
|
||||
if (Get_CtrlStatus() != CONFIG)
|
||||
StartUp_Accelerated();//start the accelerometer if not in config mode
|
||||
StartUp_Acceleromter(); //start the accelerometer
|
||||
|
||||
System_Init();//load known safe values
|
||||
Init_Oled();//init the OLED display
|
||||
Clear_Screen();//clear the display buffer to black
|
||||
Init_Gtime();//init the count down timers
|
||||
APP_Init();//pick operating mode via input voltage
|
||||
|
||||
Disk_BuffInit();//fill the buffer for the virtual disk
|
||||
Config_Analysis(); //read in config from virtual disk
|
||||
Pid_Init(); //init the pid to starting values
|
||||
Set_gKey(NO_KEY); //reset keys to all off
|
||||
Start_Watchdog(3000);//start the system watchdog as 3 seconds
|
||||
Init_Oled(); //init the OLED display
|
||||
Clear_Screen(); //clear the display buffer to black
|
||||
systemSettings.SleepTemp = 900;
|
||||
systemSettings.SleepTime = 1;
|
||||
systemSettings.SolderingTemp = 1000;
|
||||
systemSettings.movementEnabled = 1; //we use movement detection
|
||||
readIronTemp(239, 0); //load the default calibration value
|
||||
setupPID(); //init the PID values
|
||||
|
||||
Start_Watchdog(3000); //start the system watchdog as 3 seconds
|
||||
while (1) {
|
||||
Clear_Watchdog(); //reset the Watchdog
|
||||
if (Get_CtrlStatus() != CONFIG && LEAVE_WAIT_TIMER== 0) {
|
||||
Check_Accelerated(); //update readings from the accelerometer
|
||||
LEAVE_WAIT_TIMER = 50;//reset timer so we dont poll accelerometer for another 500ms
|
||||
}
|
||||
OLed_Display(); //Draw in the Oled display for this mode
|
||||
Status_Tran(); //Handle user input and mode changing
|
||||
ProcessUI();
|
||||
DrawUI();
|
||||
delayMs(50);
|
||||
}
|
||||
}
|
||||
/******************************** END OF FILE *********************************/
|
||||
|
||||
237
workspace/ts100/src/Modes.c
Normal file
237
workspace/ts100/src/Modes.c
Normal file
@@ -0,0 +1,237 @@
|
||||
/*
|
||||
* Modes.c
|
||||
*
|
||||
* Created on: 17 Sep 2016
|
||||
* Author: Ralim <ralim@ralimtek.com>
|
||||
*/
|
||||
#include "Modes.h"
|
||||
//This does the required processing and state changes
|
||||
void ProcessUI() {
|
||||
uint8_t Buttons = getButtons(); //read the buttons status
|
||||
|
||||
if (millis() - getLastButtonPress() < 200)
|
||||
Buttons = 0;
|
||||
//rough prevention for debouncing and allocates settling time
|
||||
//OLED_DrawThreeNumber(Buttons, 0);
|
||||
switch (operatingMode) {
|
||||
case STARTUP:
|
||||
if ((millis() - getLastButtonPress() > 1000)) {
|
||||
if (Buttons & BUT_A) {
|
||||
//A key pressed so we are moving to soldering mode
|
||||
operatingMode = SOLDERING;
|
||||
delayMs(500);
|
||||
resetLastButtonPress();
|
||||
resetButtons();
|
||||
} else if (Buttons & BUT_B) {
|
||||
//B Button was pressed so we are moving to the Settings menu
|
||||
operatingMode = SETTINGS;
|
||||
delayMs(500);
|
||||
resetLastButtonPress();
|
||||
resetButtons();
|
||||
}
|
||||
}
|
||||
//Nothing else to check here
|
||||
break;
|
||||
case SOLDERING:
|
||||
//We need to check the buttons if we need to jump out
|
||||
if (Buttons & BUT_A) {
|
||||
//A key pressed so we are moving to temp set
|
||||
operatingMode = TEMP_ADJ;
|
||||
resetLastButtonPress();
|
||||
resetButtons();
|
||||
} else if (Buttons & BUT_B) {
|
||||
//B Button was pressed so we are moving back to idle
|
||||
operatingMode = STARTUP;
|
||||
resetLastButtonPress();
|
||||
resetButtons();
|
||||
} else {
|
||||
//We need to check the timer for movement in case we need to goto idle
|
||||
if (systemSettings.movementEnabled)
|
||||
if (millis() - getLastMovement()
|
||||
> (systemSettings.SleepTime * 60000)) {
|
||||
if (millis() - getLastButtonPress()
|
||||
> (systemSettings.SleepTime * 60000)) {
|
||||
operatingMode = SLEEP;
|
||||
return;
|
||||
}
|
||||
}
|
||||
|
||||
//If no buttons pushed we need to perform the PID loop for the iron temp
|
||||
int32_t newOutput = computePID(systemSettings.SolderingTemp);
|
||||
if (newOutput >= 0) {
|
||||
setIronTimer(newOutput);
|
||||
}
|
||||
}
|
||||
break;
|
||||
case TEMP_ADJ:
|
||||
if (Buttons & BUT_A) {
|
||||
//A key pressed so we are moving down in temp
|
||||
resetLastButtonPress();
|
||||
if (systemSettings.SolderingTemp > 1000)
|
||||
systemSettings.SolderingTemp -= 100;
|
||||
} else if (Buttons & BUT_B) {
|
||||
//B key pressed so we are moving up in temp
|
||||
resetLastButtonPress();
|
||||
if (systemSettings.SolderingTemp < 4500)
|
||||
systemSettings.SolderingTemp += 100;
|
||||
} else {
|
||||
//we check the timeout for how long the buttons have not been pushed
|
||||
//if idle for > 3 seconds then we return to soldering
|
||||
if (millis() - getLastButtonPress() > 3000)
|
||||
operatingMode = SOLDERING;
|
||||
}
|
||||
break;
|
||||
case SETTINGS:
|
||||
//Settings is the mode with the most logic
|
||||
//Here we are in the menu so we need to increment through the sub menus / increase the value
|
||||
if (millis() - getLastButtonPress() < 400)
|
||||
return;
|
||||
|
||||
if (Buttons & BUT_A) {
|
||||
resetLastButtonPress();
|
||||
//A key iterates through the menu
|
||||
if (settingsPage == 2) {
|
||||
//Roll off the end
|
||||
settingsPage = 0; //reset
|
||||
operatingMode = STARTUP;
|
||||
//TODO Save settings
|
||||
} else
|
||||
++settingsPage; //move to the next option
|
||||
} else if (Buttons & BUT_B) {
|
||||
resetLastButtonPress();
|
||||
//B changes the value selected
|
||||
switch (settingsPage) {
|
||||
case UVLO:
|
||||
//we are incrementing the cutout voltage
|
||||
systemSettings.cutoutVoltage += 1; //Go up 1V at a jump
|
||||
if (systemSettings.cutoutVoltage > 24)
|
||||
systemSettings.cutoutVoltage = 9;
|
||||
else if (systemSettings.cutoutVoltage < 9)
|
||||
systemSettings.cutoutVoltage = 9; //cant set UVLO below 9V
|
||||
break;
|
||||
case SLEEP_TEMP:
|
||||
systemSettings.SleepTemp += 100; //Go up 10c at a time
|
||||
if (systemSettings.SleepTemp > 3000)
|
||||
systemSettings.SleepTemp = 1000;//cant sleep higher than 300
|
||||
break;
|
||||
case SLEEP_TIME:
|
||||
++systemSettings.SleepTime; //Go up 1 minute at a time
|
||||
if (systemSettings.SleepTime > 60)
|
||||
systemSettings.SleepTime = 2; //cant set time over an hour
|
||||
//Remember that ^ is the time of no movement
|
||||
break;
|
||||
default:
|
||||
break;
|
||||
}
|
||||
}
|
||||
break;
|
||||
case SLEEP:
|
||||
//The iron is sleeping at a lower temperature due to lack of movement
|
||||
if (Buttons & BUT_A) {
|
||||
//A Button was pressed so we are moving back to soldering
|
||||
operatingMode = SOLDERING;
|
||||
resetLastButtonPress();
|
||||
resetButtons();
|
||||
return;
|
||||
} else if (Buttons & BUT_B) {
|
||||
//B Button was pressed so we are moving back to soldering
|
||||
operatingMode = SOLDERING;
|
||||
resetLastButtonPress();
|
||||
resetButtons();
|
||||
return;
|
||||
} else if (systemSettings.movementEnabled)
|
||||
if (millis() - getLastMovement() < 1000) {//moved in the last second
|
||||
operatingMode = SOLDERING; //Goto active mode again
|
||||
return;
|
||||
}
|
||||
//else if nothing has been pushed we need to compute the PID to keep the iron at the sleep temp
|
||||
int32_t newOutput = computePID(systemSettings.SleepTemp);
|
||||
if (newOutput >= 0) {
|
||||
setIronTimer(newOutput);
|
||||
}
|
||||
break;
|
||||
default:
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
void DrawUI() {
|
||||
switch (operatingMode) {
|
||||
case STARTUP:
|
||||
//We are chilling in the idle mode
|
||||
//Check if movement in the last 5 minutes , if not sleep OLED
|
||||
if (millis() - getLastMovement() > (5 * 60 * 1000)
|
||||
&& (millis() - getLastButtonPress() > (5 * 60 * 1000))) {
|
||||
//OLED off
|
||||
Oled_DisplayOff();
|
||||
} else {
|
||||
Oled_DisplayOn();
|
||||
OLED_DrawString("IDLE ", 7); //write the word IDLE
|
||||
}
|
||||
break;
|
||||
case SOLDERING:
|
||||
//The user is soldering
|
||||
{
|
||||
uint16_t temp = readIronTemp(0, 0);
|
||||
if (systemSettings.SolderingTemp + 2 < temp) {
|
||||
OLED_DrawChar('C', 14 * 4);
|
||||
} else {
|
||||
if (getIronTimer() < 500) {
|
||||
OLED_DrawChar(' ', 14 * 4);
|
||||
} else { //we are heating
|
||||
OLED_DrawChar('H', 14 * 4);
|
||||
}
|
||||
|
||||
}
|
||||
OLED_DrawThreeNumber(temp / 10, 0);
|
||||
OLED_DrawChar(' ', 14 * 3);
|
||||
OLED_DrawChar(' ', 14 * 5);
|
||||
OLED_DrawChar(' ', 14 * 6);
|
||||
|
||||
}
|
||||
break;
|
||||
case TEMP_ADJ:
|
||||
//We are prompting the user to change the temp so we draw the current setpoint temp
|
||||
//With the nifty arrows
|
||||
OLED_DrawChar(' ', 0);
|
||||
OLED_DrawThreeNumber(systemSettings.SolderingTemp / 10, 14 * 1);
|
||||
OLED_DrawChar(' ', 14 * 4);
|
||||
OLED_DrawChar(' ', 14 * 5);
|
||||
|
||||
break;
|
||||
case SETTINGS:
|
||||
//We are prompting the user the setting name
|
||||
|
||||
switch (settingsPage) {
|
||||
case UVLO:
|
||||
OLED_DrawString("UVLO", 4);
|
||||
OLED_DrawTwoNumber(systemSettings.cutoutVoltage, 14 * 4);
|
||||
//OLED_DrawChar('V', 14 * 5);
|
||||
|
||||
break;
|
||||
case SLEEP_TEMP:
|
||||
OLED_DrawString("STMP", 4);
|
||||
OLED_DrawThreeNumber(systemSettings.SleepTemp / 10, 14 * 4);
|
||||
//OLED_DrawChar('V', 14 * 5);
|
||||
|
||||
break;
|
||||
case SLEEP_TIME:
|
||||
OLED_DrawString("STME ", 5);
|
||||
OLED_DrawTwoNumber(systemSettings.SleepTime, 14 * 5);
|
||||
break;
|
||||
default:
|
||||
break;
|
||||
}
|
||||
break;
|
||||
case SLEEP:
|
||||
//The iron is in sleep temp mode
|
||||
//Draw in temp and sleep
|
||||
OLED_DrawString("SLP", 3);
|
||||
uint16_t temp = readIronTemp(0, 0);
|
||||
OLED_DrawThreeNumber(temp / 10, 14 * 3);
|
||||
|
||||
break;
|
||||
default:
|
||||
break;
|
||||
}
|
||||
}
|
||||
@@ -14,34 +14,19 @@
|
||||
#include "Oled.h"
|
||||
#include "Bios.h"
|
||||
#include "I2C.h"
|
||||
#include "Hardware.h"
|
||||
#include "Disk.h"
|
||||
#include "UI.h"
|
||||
|
||||
#include "Font.h"
|
||||
|
||||
//Setup params depending on oled model
|
||||
#ifdef SSD1316
|
||||
u8 gOled_param[50] = {0x80,0xAE,0x80,0x00,0x80,0x10,0x80,0x40,0x80,0xB0,0x80,
|
||||
0x81,0x80,0xFF,0x80,0xA0,0x80,0xA6,0x80,0xA8,0x80,0x1F,
|
||||
0x80,0xC8,0x80,0xD3,0x80,0x00,0x80,0xD5,0x80,0x80,0x80,
|
||||
0xD9,0x80,0x22,0x80,0xDA,0x80,0x12,0x80,0xDB,0x80,0x40,
|
||||
0x80,0x8D,0x80,0x14,0x80,0xAF,
|
||||
};
|
||||
#else
|
||||
u8 gOled_param[46] = { 0x80, 0xAE, 0x80, 0xD5, 0x80, 0x52, 0x80, 0xA8, 0x80,
|
||||
0x0f, 0x80, 0xC0, 0x80, 0xD3, 0x80, 0x00, 0x80, 0x40, 0x80, 0xA0, 0x80,
|
||||
0x8D, 0x80, 0x14, 0x80, 0xDA, 0x80, 0x02, 0x80, 0x81, 0x80, 0x33, 0x80,
|
||||
0xD9, 0x80, 0xF1, 0x80, 0xDB, 0x80, 0x30, 0x80, 0xA4, 0x80, 0XA6, 0x80,
|
||||
0xAF };
|
||||
#endif
|
||||
|
||||
/*******************************************************************************
|
||||
<20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD>: Sc_Pt
|
||||
<20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>:<3A><>Ļ<EFBFBD><C4BB><EFBFBD><EFBFBD><EFBFBD>ı<EFBFBD><C4B1><EFBFBD>Ļ<EFBFBD>Աȶ<D4B1>
|
||||
<20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>:Co<43><6F>Ļ<EFBFBD>ԱȶȲ<C8B6><C8B2><EFBFBD>
|
||||
<20><><EFBFBD>ز<EFBFBD><D8B2><EFBFBD>:NULL
|
||||
|
||||
*******************************************************************************/
|
||||
void Sc_Pt(u8 Co) //<2F><>Ļ<EFBFBD><C4BB><EFBFBD><EFBFBD>
|
||||
{
|
||||
void Sc_Pt(u8 Co) {
|
||||
u8 pt[4] = { 0x80, 0x81, 0x80, Co };
|
||||
|
||||
I2C_PageWrite(pt, 4, DEVICEADDR_OLED);
|
||||
@@ -157,16 +142,10 @@ void Init_Oled(void) {
|
||||
u8 param_len;
|
||||
|
||||
OLED_RST();
|
||||
Delay_Ms(2);
|
||||
delayMs(2); //reset the oled
|
||||
OLED_ACT();
|
||||
Delay_Ms(2);
|
||||
|
||||
#ifdef SSD1316
|
||||
param_len = 50;
|
||||
#else
|
||||
delayMs(2);
|
||||
param_len = 46;
|
||||
#endif
|
||||
|
||||
I2C_PageWrite((u8 *) gOled_param, param_len, DEVICEADDR_OLED);
|
||||
}
|
||||
|
||||
@@ -176,20 +155,54 @@ void Init_Oled(void) {
|
||||
*******************************************************************************/
|
||||
void Clear_Screen(void) {
|
||||
u8 tx_data[128];
|
||||
u8 i, wd;
|
||||
|
||||
#ifdef SSD1316
|
||||
wd = 32;
|
||||
#else
|
||||
wd = 16;
|
||||
#endif
|
||||
|
||||
memset(&tx_data[0], 0, 128);
|
||||
for (i = 0; i < wd / 8; i++) {
|
||||
for (u8 i = 0; i < 2; i++) {
|
||||
Oled_DrawArea(0, i * 8, 128, 8, tx_data);
|
||||
}
|
||||
}
|
||||
void OLED_DrawString(char* string, uint8_t length) {
|
||||
for (uint8_t i = 0; i < length; i++) {
|
||||
OLED_DrawChar(string[i], i * 14);
|
||||
}
|
||||
}
|
||||
void OLED_DrawChar(char c, uint8_t x) {
|
||||
if ((x) > (128 - 14))
|
||||
return; //Rudimentary clipping to not draw off screen
|
||||
u8* ptr;
|
||||
ptr = (u8*) FONT;
|
||||
if (c >= 'A' && c <= 'Z') {
|
||||
ptr += (c - 'A' + 10) * (14 * 2); //alpha is ofset 10 chars into the array
|
||||
} else if (c >= '0' && c <= '9')
|
||||
ptr += (c - '0') * (14 * 2);
|
||||
else if (c < 10)
|
||||
ptr += (c) * (14 * 2);
|
||||
else if (c == ' ') {
|
||||
//blank on space bar
|
||||
ptr += (36) * (14 * 2);
|
||||
}
|
||||
|
||||
Oled_DrawArea(x, 0, 14, 16, (u8*) ptr);
|
||||
}
|
||||
/*
|
||||
* Draw a 2 digit number to the display
|
||||
* */
|
||||
void OLED_DrawTwoNumber(uint8_t in, uint8_t x) {
|
||||
OLED_DrawChar((in / 10)%10, x);
|
||||
OLED_DrawChar(in % 10, x + 14);
|
||||
}
|
||||
void OLED_DrawThreeNumber(uint16_t in, uint8_t x) {
|
||||
|
||||
OLED_DrawChar((in / 100)%10, x);
|
||||
OLED_DrawChar((in / 10)%10, x + 14);
|
||||
OLED_DrawChar(in % 10, x + 28);
|
||||
}
|
||||
void OLED_DrawFourNumber(uint16_t in, uint8_t x) {
|
||||
|
||||
OLED_DrawChar((in / 1000)%10, x);
|
||||
OLED_DrawChar((in / 100)%10, x+14);
|
||||
OLED_DrawChar((in / 10)%10, x + 28);
|
||||
OLED_DrawChar(in % 10, x + 32);
|
||||
}
|
||||
|
||||
/******************************** END OF FILE *********************************/
|
||||
|
||||
|
||||
45
workspace/ts100/src/PID.c
Normal file
45
workspace/ts100/src/PID.c
Normal file
@@ -0,0 +1,45 @@
|
||||
/*
|
||||
* PID.c
|
||||
*
|
||||
* Created on: 20 Sep 2016
|
||||
* Author: ralim
|
||||
*/
|
||||
|
||||
#include "PID.h"
|
||||
#define MAXPIDOUTPUT 500000
|
||||
//This funtion computes the new value for the ON time of the system
|
||||
//This is the return value from this function
|
||||
int32_t computePID(uint16_t setpoint) {
|
||||
static uint32_t lastSample = 0;
|
||||
int32_t ITerm = 0;
|
||||
static int16_t lastReading = 0;
|
||||
if (millis() - lastSample > 25) {
|
||||
//only sample every 50 milliseconds
|
||||
uint16_t currentReading = readIronTemp(0,1); //get the current temp of the iron
|
||||
int16_t error = (int16_t)setpoint - (int16_t)currentReading; //calculate the error term
|
||||
ITerm += (pidSettings.ki * error);
|
||||
if (ITerm > MAXPIDOUTPUT)
|
||||
ITerm = MAXPIDOUTPUT;
|
||||
else if (ITerm < 0)
|
||||
ITerm = 0; //cap at 0 since we cant force the iron to cool itself :)
|
||||
|
||||
int16_t DInput = (currentReading - lastReading); //compute the input to the D term
|
||||
int32_t output = (pidSettings.kp * error) + (ITerm)
|
||||
- (pidSettings.kd * DInput);
|
||||
if (output > MAXPIDOUTPUT)
|
||||
output = MAXPIDOUTPUT;
|
||||
else if (output < 0)
|
||||
output = 0;
|
||||
lastSample = millis();
|
||||
lastReading = currentReading; //storing values for next iteration of the loop
|
||||
return output;
|
||||
}
|
||||
return -1; //called too fast
|
||||
}
|
||||
|
||||
void setupPID(void) {
|
||||
pidSettings.kp = 22;
|
||||
pidSettings.ki = 7;
|
||||
pidSettings.kd = 2;
|
||||
|
||||
}
|
||||
File diff suppressed because it is too large
Load Diff
@@ -1,269 +0,0 @@
|
||||
/******************** (C) COPYRIGHT 2015 e-Design Co., Ltd. ********************
|
||||
File Name : USB_bot.c
|
||||
Version : STM32_USB Disk Ver 3.4 Author : MCD Application Team & bure
|
||||
*******************************************************************************/
|
||||
#include "usb_scsi.h"
|
||||
#include "usb_regs.h"
|
||||
#include "usb_mem.h"
|
||||
#include "usb_conf.h"
|
||||
#include "usb_bot.h"
|
||||
#include "usb_prop.h"
|
||||
|
||||
u8 Bot_State;
|
||||
u8 Bulk_Buff[BULK_MAX_PACKET_SIZE]; // Data_ data buffer
|
||||
u16 Data_Len;
|
||||
Bulk_Only_CBW CBW;
|
||||
Bulk_Only_CSW CSW;
|
||||
u32 SCSI_LBA , SCSI_BlkLen;
|
||||
|
||||
/*******************************************************************************
|
||||
Mass_Storage_In: Mass Storage IN transfer.
|
||||
*******************************************************************************/
|
||||
void Mass_Storage_In (void)
|
||||
{
|
||||
switch (Bot_State)
|
||||
{
|
||||
case BOT_CSW_Send:
|
||||
case BOT_ERROR:
|
||||
Bot_State = BOT_IDLE;
|
||||
SetEPRxStatus(ENDP2, EP_RX_VALID);/* enable the Endpoint to receive the next cmd*/
|
||||
break;
|
||||
case BOT_DATA_IN:
|
||||
switch (CBW.CB[0])
|
||||
{
|
||||
case SCSI_READ10:
|
||||
SCSI_Read10_Cmd(SCSI_LBA , SCSI_BlkLen);
|
||||
break;
|
||||
}
|
||||
break;
|
||||
case BOT_DATA_IN_LAST:
|
||||
Set_CSW (CSW_CMD_PASSED, SEND_CSW_ENABLE);
|
||||
SetEPRxStatus(ENDP2, EP_RX_VALID);
|
||||
break;
|
||||
|
||||
default:
|
||||
break;
|
||||
}
|
||||
}
|
||||
/*******************************************************************************
|
||||
Mass_Storage_Out: Mass Storage OUT transfer.
|
||||
*******************************************************************************/
|
||||
void Mass_Storage_Out (void)
|
||||
{
|
||||
u8 CMD;
|
||||
CMD = CBW.CB[0];
|
||||
Data_Len = GetEPRxCount(ENDP2);
|
||||
|
||||
PMAToUserBufferCopy(Bulk_Buff, ENDP2_RXADDR, Data_Len);
|
||||
|
||||
switch (Bot_State)
|
||||
{
|
||||
case BOT_IDLE:
|
||||
CBW_Decode();
|
||||
break;
|
||||
case BOT_DATA_OUT:
|
||||
if (CMD == SCSI_WRITE10)
|
||||
{
|
||||
SCSI_Write10_Cmd(SCSI_LBA , SCSI_BlkLen);
|
||||
break;
|
||||
}
|
||||
Bot_Abort(DIR_OUT);
|
||||
Set_Scsi_Sense_Data(ILLEGAL_REQUEST, INVALID_FIELED_IN_COMMAND);
|
||||
Set_CSW (CSW_PHASE_ERROR, SEND_CSW_DISABLE);
|
||||
break;
|
||||
default:
|
||||
Bot_Abort(BOTH_DIR);
|
||||
Set_Scsi_Sense_Data(ILLEGAL_REQUEST, INVALID_FIELED_IN_COMMAND);
|
||||
Set_CSW (CSW_PHASE_ERROR, SEND_CSW_DISABLE);
|
||||
break;
|
||||
}
|
||||
}
|
||||
/*******************************************************************************
|
||||
CBW_Decode: Decode the received CBW and call the related SCSI command
|
||||
*******************************************************************************/
|
||||
void CBW_Decode(void)
|
||||
{
|
||||
u32 Counter;
|
||||
|
||||
for (Counter = 0; Counter < Data_Len; Counter++)
|
||||
{
|
||||
*((u8 *)&CBW + Counter) = Bulk_Buff[Counter];
|
||||
}
|
||||
CSW.dTag = CBW.dTag;
|
||||
CSW.dDataResidue = CBW.dDataLength;
|
||||
if (Data_Len != BOT_CBW_PACKET_LENGTH)
|
||||
{
|
||||
Bot_Abort(BOTH_DIR);
|
||||
// reset the CBW.dSignature to desible the clear feature until receiving a Mass storage reset
|
||||
CBW.dSignature = 0;
|
||||
Set_Scsi_Sense_Data(ILLEGAL_REQUEST, PARAMETER_LIST_LENGTH_ERROR);
|
||||
Set_CSW (CSW_CMD_FAILED, SEND_CSW_DISABLE);
|
||||
return;
|
||||
}
|
||||
|
||||
if ((CBW.CB[0] == SCSI_READ10 ) || (CBW.CB[0] == SCSI_WRITE10 ))
|
||||
{
|
||||
// Calculate Logical Block Address
|
||||
SCSI_LBA = (CBW.CB[2] << 24) | (CBW.CB[3] << 16) | (CBW.CB[4] << 8) | CBW.CB[5];
|
||||
// Calculate the Number of Blocks to transfer
|
||||
SCSI_BlkLen = (CBW.CB[7] << 8) | CBW.CB[8];
|
||||
}
|
||||
|
||||
if (CBW.dSignature == BOT_CBW_SIGNATURE)
|
||||
{
|
||||
// Valid CBW
|
||||
if ((CBW.bLUN > Max_Lun) || (CBW.bCBLength < 1) || (CBW.bCBLength > 16))
|
||||
{
|
||||
Bot_Abort(BOTH_DIR);
|
||||
Set_Scsi_Sense_Data(ILLEGAL_REQUEST, INVALID_FIELED_IN_COMMAND);
|
||||
Set_CSW (CSW_CMD_FAILED, SEND_CSW_DISABLE);
|
||||
}
|
||||
else
|
||||
{
|
||||
switch (CBW.CB[0])
|
||||
{
|
||||
case SCSI_REQUEST_SENSE:
|
||||
SCSI_RequestSense_Cmd ();
|
||||
break;
|
||||
case SCSI_INQUIRY:
|
||||
SCSI_Inquiry_Cmd();
|
||||
break;
|
||||
case SCSI_START_STOP_UNIT:
|
||||
SCSI_Start_Stop_Unit_Cmd();
|
||||
break;
|
||||
case SCSI_ALLOW_MEDIUM_REMOVAL:
|
||||
SCSI_Start_Stop_Unit_Cmd();
|
||||
break;
|
||||
case SCSI_MODE_SENSE6:
|
||||
SCSI_ModeSense6_Cmd ();
|
||||
break;
|
||||
case SCSI_MODE_SENSE10:
|
||||
SCSI_ModeSense10_Cmd ();
|
||||
break;
|
||||
case SCSI_READ_FORMAT_CAPACITIES:
|
||||
SCSI_ReadFormatCapacity_Cmd();
|
||||
break;
|
||||
case SCSI_READ_CAPACITY10:
|
||||
SCSI_ReadCapacity10_Cmd();
|
||||
break;
|
||||
case SCSI_TEST_UNIT_READY:
|
||||
SCSI_TestUnitReady_Cmd();
|
||||
break;
|
||||
case SCSI_READ10:
|
||||
SCSI_Read10_Cmd(SCSI_LBA , SCSI_BlkLen);
|
||||
break;
|
||||
case SCSI_WRITE10:
|
||||
SCSI_Write10_Cmd(SCSI_LBA , SCSI_BlkLen);
|
||||
break;
|
||||
case SCSI_VERIFY10:
|
||||
SCSI_Verify10_Cmd();
|
||||
break;
|
||||
//Unsupported command
|
||||
case SCSI_MODE_SELECT10:
|
||||
SCSI_Mode_Select10_Cmd();
|
||||
break;
|
||||
case SCSI_MODE_SELECT6:
|
||||
SCSI_Mode_Select6_Cmd();
|
||||
break;
|
||||
|
||||
case SCSI_SEND_DIAGNOSTIC:
|
||||
SCSI_Send_Diagnostic_Cmd();
|
||||
break;
|
||||
case SCSI_READ6:
|
||||
SCSI_Read6_Cmd();
|
||||
break;
|
||||
case SCSI_READ12:
|
||||
SCSI_Read12_Cmd();
|
||||
break;
|
||||
case SCSI_READ16:
|
||||
SCSI_Read16_Cmd();
|
||||
break;
|
||||
case SCSI_READ_CAPACITY16:
|
||||
SCSI_READ_CAPACITY16_Cmd();
|
||||
break;
|
||||
case SCSI_WRITE6:
|
||||
SCSI_Write6_Cmd();
|
||||
break;
|
||||
case SCSI_WRITE12:
|
||||
SCSI_Write12_Cmd();
|
||||
break;
|
||||
case SCSI_WRITE16:
|
||||
SCSI_Write16_Cmd();
|
||||
break;
|
||||
case SCSI_VERIFY12:
|
||||
SCSI_Verify12_Cmd();
|
||||
break;
|
||||
case SCSI_VERIFY16:
|
||||
SCSI_Verify16_Cmd();
|
||||
break;
|
||||
|
||||
default:
|
||||
{
|
||||
Bot_Abort(BOTH_DIR);
|
||||
Set_Scsi_Sense_Data(ILLEGAL_REQUEST, INVALID_COMMAND);
|
||||
Set_CSW (CSW_CMD_FAILED, SEND_CSW_DISABLE);
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
else
|
||||
{
|
||||
// Invalid CBW
|
||||
Bot_Abort(BOTH_DIR);
|
||||
Set_Scsi_Sense_Data(ILLEGAL_REQUEST, INVALID_COMMAND);
|
||||
Set_CSW (CSW_CMD_FAILED, SEND_CSW_DISABLE);
|
||||
}
|
||||
}
|
||||
/*******************************************************************************
|
||||
Transfer_Data_Request: Send the request response to the PC HOST.
|
||||
Input : u8* Data_Address : point to the data to transfer.
|
||||
u16 Data_Length : the nember of Bytes to transfer.
|
||||
*******************************************************************************/
|
||||
void Transfer_Data_Request(u8* Data_Pointer, u16 Data_Len)
|
||||
{
|
||||
UserToPMABufferCopy(Data_Pointer, ENDP1_TXADDR, Data_Len);
|
||||
SetEPTxCount(ENDP1, Data_Len);
|
||||
SetEPTxStatus(ENDP1, EP_TX_VALID);
|
||||
Bot_State = BOT_DATA_IN_LAST;
|
||||
CSW.dDataResidue -= Data_Len;
|
||||
CSW.bStatus = CSW_CMD_PASSED;
|
||||
}
|
||||
/*******************************************************************************
|
||||
Set_CSW: Set the SCW with the needed fields.
|
||||
Input : u8 CSW_Status this filed can be CSW_CMD_PASSED,CSW_CMD_FAILED,
|
||||
or CSW_PHASE_ERROR.
|
||||
*******************************************************************************/
|
||||
void Set_CSW (u8 CSW_Status, u8 Send_Permission)
|
||||
{
|
||||
CSW.dSignature = BOT_CSW_SIGNATURE;
|
||||
CSW.bStatus = CSW_Status;
|
||||
UserToPMABufferCopy(((u8 *)& CSW), ENDP1_TXADDR, CSW_DATA_LENGTH);
|
||||
SetEPTxCount(ENDP1, CSW_DATA_LENGTH);
|
||||
Bot_State = BOT_ERROR;
|
||||
if (Send_Permission){
|
||||
Bot_State = BOT_CSW_Send;
|
||||
SetEPTxStatus(ENDP1, EP_TX_VALID);
|
||||
}
|
||||
}
|
||||
/*******************************************************************************
|
||||
Bot_Abort: Stall the needed Endpoint according to the selected direction.
|
||||
Input : Endpoint direction IN, OUT or both directions
|
||||
*******************************************************************************/
|
||||
void Bot_Abort(u8 Direction)
|
||||
{
|
||||
switch (Direction){
|
||||
case DIR_IN :
|
||||
SetEPTxStatus(ENDP1, EP_TX_STALL);
|
||||
break;
|
||||
case DIR_OUT :
|
||||
SetEPRxStatus(ENDP2, EP_RX_STALL);
|
||||
break;
|
||||
case BOTH_DIR :
|
||||
SetEPTxStatus(ENDP1, EP_TX_STALL);
|
||||
SetEPRxStatus(ENDP2, EP_RX_STALL);
|
||||
break;
|
||||
default:
|
||||
break;
|
||||
}
|
||||
}
|
||||
/********************************* END OF FILE ******************************/
|
||||
@@ -1,109 +0,0 @@
|
||||
/******************** (C) COPYRIGHT 2015 e-Design Co., Ltd. ********************
|
||||
File Name : USB_desc.c
|
||||
Version : STM32_USB Disk Ver 3.4 Author : MCD Application Team & bure
|
||||
*******************************************************************************/
|
||||
#include "usb_desc.h"
|
||||
|
||||
const u8 MASS_DeviceDescriptor[MASS_SIZ_DEVICE_DESC] ={
|
||||
0x12, /* bLength */
|
||||
0x01, /* bDescriptorType */
|
||||
0x00, /* bcdUSB, version 2.00 */
|
||||
0x02,
|
||||
0x00, /* bDeviceClass : each interface define the device class */
|
||||
0x00, /* bDeviceSubClass */
|
||||
0x00, /* bDeviceProtocol */
|
||||
0x40, /* bMaxPacketSize0 0x40 = 64 */
|
||||
0x83, /* idVendor (0483) */
|
||||
0x04,
|
||||
0x20, /* idProduct */
|
||||
0x57,
|
||||
0x00, /* bcdDevice 2.00*/
|
||||
0x02,
|
||||
1, /* index of string Manufacturer */
|
||||
/**/
|
||||
2, /* index of string descriptor of product*/
|
||||
/* */
|
||||
3, /* */
|
||||
/* */
|
||||
/* */
|
||||
0x01 /*bNumConfigurations */
|
||||
};
|
||||
const u8 MASS_ConfigDescriptor[MASS_SIZ_CONFIG_DESC] ={
|
||||
0x09, /* bLength: Configuation Descriptor size */
|
||||
0x02, /* bDescriptorType: Configuration */
|
||||
MASS_SIZ_CONFIG_DESC,
|
||||
0x00,
|
||||
0x01, /* bNumInterfaces: 1 interface */
|
||||
0x01, /* bConfigurationValue: */
|
||||
/* Configuration value */
|
||||
0x00, /* iConfiguration: */
|
||||
/* Index of string descriptor */
|
||||
/* describing the configuration */
|
||||
0xC0, /* bmAttributes: */
|
||||
/* bus powered */
|
||||
0x32, /* MaxPower 100 mA */
|
||||
|
||||
/******************** Descriptor of Mass Storage interface ********************/
|
||||
/* 09 */
|
||||
0x09, /* bLength: Interface Descriptor size */
|
||||
0x04, /* bDescriptorType: */
|
||||
/* Interface descriptor type */
|
||||
0x00, /* bInterfaceNumber: Number of Interface */
|
||||
0x00, /* bAlternateSetting: Alternate setting */
|
||||
0x02, /* bNumEndpoints*/
|
||||
0x08, /* bInterfaceClass: MASS STORAGE Class */
|
||||
0x06, /* bInterfaceSubClass : SCSI transparent*/
|
||||
0x50, /* nInterfaceProtocol */
|
||||
4, /* iInterface: */
|
||||
/* 18 */
|
||||
0x07, /*Endpoint descriptor length = 7*/
|
||||
0x05, /*Endpoint descriptor type */
|
||||
0x81, /*Endpoint address (IN, address 1) */
|
||||
0x02, /*Bulk endpoint type */
|
||||
0x40, /*Maximum packet size (64 bytes) */
|
||||
0x00,
|
||||
0x00, /*Polling interval in milliseconds */
|
||||
/* 25 */
|
||||
0x07, /*Endpoint descriptor length = 7 */
|
||||
0x05, /*Endpoint descriptor type */
|
||||
0x02, /*Endpoint address (OUT, address 2) */
|
||||
0x02, /*Bulk endpoint type */
|
||||
0x40, /*Maximum packet size (64 bytes) */
|
||||
0x00,
|
||||
0x00 /*Polling interval in milliseconds*/
|
||||
/*32*/
|
||||
};
|
||||
const u8 MASS_StringLangID[MASS_SIZ_STRING_LANGID] ={
|
||||
MASS_SIZ_STRING_LANGID,
|
||||
0x03,
|
||||
0x09,
|
||||
0x04
|
||||
}; // LangID = 0x0409: U.S. English //
|
||||
const u8 MASS_StringVendor[MASS_SIZ_STRING_VENDOR] ={
|
||||
MASS_SIZ_STRING_VENDOR, // Size of manufaturer string //
|
||||
0x03, // bDescriptorType = String descriptor //
|
||||
// Manufacturer: "STMicroelectronics" //
|
||||
'S', 0, 'T', 0, 'M', 0, 'i', 0, 'c', 0, 'r', 0, 'o', 0, 'e', 0,
|
||||
'l', 0, 'e', 0, 'c', 0, 't', 0, 'r', 0, 'o', 0, 'n', 0, 'i', 0,
|
||||
'c', 0, 's', 0
|
||||
};
|
||||
const u8 MASS_StringProduct[MASS_SIZ_STRING_PRODUCT] ={
|
||||
MASS_SIZ_STRING_PRODUCT,
|
||||
0x03,
|
||||
// Product name: "STM32F10x:USB Mass Storage" //
|
||||
'S', 0, 'T', 0, 'M', 0, '3', 0, '2', 0, ' ', 0, 'M', 0, 'a', 0, 's', 0,
|
||||
's', 0, ' ', 0, 'S', 0, 't', 0, 'o', 0, 'r', 0, 'a', 0, 'g', 0, 'e', 0
|
||||
};
|
||||
u8 MASS_StringSerial[MASS_SIZ_STRING_SERIAL] ={
|
||||
MASS_SIZ_STRING_SERIAL,
|
||||
0x03,
|
||||
// Serial number//
|
||||
'S', 0, 'T', 0, 'M', 0, '3', 0, '2', 0, '1', 0, '0', 0
|
||||
};
|
||||
const u8 MASS_StringInterface[MASS_SIZ_STRING_INTERFACE] ={
|
||||
MASS_SIZ_STRING_INTERFACE,
|
||||
0x03,
|
||||
// Interface 0: "ST Mass" //
|
||||
'S', 0, 'T', 0, ' ', 0, 'M', 0, 'a', 0, 's', 0, 's', 0
|
||||
};
|
||||
/********************************* END OF FILE ******************************/
|
||||
@@ -1,138 +0,0 @@
|
||||
/******************** (C) COPYRIGHT 2015 e-Design Co., Ltd. ********************
|
||||
File Name : USB_istr.c
|
||||
Version : STM32 USB Disk Ver 3.4 Author : MCD Application Team & bure
|
||||
*******************************************************************************/
|
||||
#include "usb_type.h"
|
||||
#include "usb_regs.h"
|
||||
#include "usb_pwr.h"
|
||||
#include "usb_istr.h"
|
||||
#include "usb_init.h"
|
||||
#include "usb_int.h"
|
||||
#include "usb_bot.h"
|
||||
|
||||
volatile u16 wIstr; /* ISTR register last read value */
|
||||
volatile u8 bIntPackSOF = 0; /* SOFs received between 2 consecutive packets */
|
||||
|
||||
void (*pEpInt_IN[7])(void) ={
|
||||
EP1_IN_Callback,
|
||||
EP2_IN_Callback,
|
||||
EP3_IN_Callback,
|
||||
EP4_IN_Callback,
|
||||
EP5_IN_Callback,
|
||||
EP6_IN_Callback,
|
||||
EP7_IN_Callback,
|
||||
};
|
||||
void (*pEpInt_OUT[7])(void) ={
|
||||
EP1_OUT_Callback,
|
||||
EP2_OUT_Callback,
|
||||
EP3_OUT_Callback,
|
||||
EP4_OUT_Callback,
|
||||
EP5_OUT_Callback,
|
||||
EP6_OUT_Callback,
|
||||
EP7_OUT_Callback,
|
||||
};
|
||||
/*******************************************************************************
|
||||
USB_Istr: ISTR events interrupt service routine
|
||||
*******************************************************************************/
|
||||
void USB_Istr(void)
|
||||
{
|
||||
wIstr = _GetISTR();
|
||||
#if (IMR_MSK & ISTR_RESET)
|
||||
if (wIstr & ISTR_RESET & wInterrupt_Mask){
|
||||
// _SetISTR((u16)CLR_RESET);
|
||||
Device_Property.Reset();
|
||||
_SetISTR((u16)CLR_RESET);
|
||||
//#ifdef RESET_CALLBACK
|
||||
// RESET_Callback();
|
||||
//#endif
|
||||
}
|
||||
#endif
|
||||
//-----------------------------------------------------------------------------
|
||||
#if (IMR_MSK & ISTR_DOVR)
|
||||
if (wIstr & ISTR_DOVR & wInterrupt_Mask){
|
||||
_SetISTR((u16)CLR_DOVR);
|
||||
//#ifdef DOVR_CALLBACK
|
||||
// DOVR_Callback();
|
||||
//#endif
|
||||
}
|
||||
#endif
|
||||
//-----------------------------------------------------------------------------
|
||||
#if (IMR_MSK & ISTR_ERR)
|
||||
if (wIstr & ISTR_ERR & wInterrupt_Mask){
|
||||
_SetISTR((u16)CLR_ERR);
|
||||
//#ifdef ERR_CALLBACK
|
||||
// ERR_Callback();
|
||||
//#endif
|
||||
}
|
||||
#endif
|
||||
//-----------------------------------------------------------------------------
|
||||
#if (IMR_MSK & ISTR_WKUP)
|
||||
if (wIstr & ISTR_WKUP & wInterrupt_Mask){
|
||||
// _SetISTR((u16)CLR_WKUP);
|
||||
Resume(RESUME_EXTERNAL);
|
||||
_SetISTR((u16)CLR_WKUP);
|
||||
//#ifdef WKUP_CALLBACK
|
||||
// WKUP_Callback();
|
||||
//#endif
|
||||
}
|
||||
#endif
|
||||
//-----------------------------------------------------------------------------
|
||||
#if (IMR_MSK & ISTR_SUSP)
|
||||
if (wIstr & ISTR_SUSP & wInterrupt_Mask){ // check if SUSPEND is possible
|
||||
if (fSuspendEnabled) Suspend();
|
||||
else Resume(RESUME_LATER); // if not possible then resume after xx ms
|
||||
_SetISTR((u16)CLR_SUSP); // clear of the ISTR bit must be done after setting of CNTR_FSUSP
|
||||
//#ifdef SUSP_CALLBACK
|
||||
// SUSP_Callback();
|
||||
//#endif
|
||||
}
|
||||
#endif
|
||||
//-----------------------------------------------------------------------------
|
||||
#if (IMR_MSK & ISTR_SOF)
|
||||
if (wIstr & ISTR_SOF & wInterrupt_Mask){
|
||||
_SetISTR((u16)CLR_SOF);
|
||||
bIntPackSOF++;
|
||||
//#ifdef SOF_CALLBACK
|
||||
// SOF_Callback();
|
||||
//#endif
|
||||
}
|
||||
#endif
|
||||
//-----------------------------------------------------------------------------
|
||||
#if (IMR_MSK & ISTR_ESOF)
|
||||
if (wIstr & ISTR_ESOF & wInterrupt_Mask){
|
||||
// _SetISTR((u16)CLR_ESOF); // resume handling timing is made with ESOFs
|
||||
Resume(RESUME_ESOF); // request without change of the machine state
|
||||
_SetISTR((u16)CLR_ESOF); // resume handling timing is made with ESOFs
|
||||
//#ifdef ESOF_CALLBACK
|
||||
// ESOF_Callback();
|
||||
//#endif
|
||||
}
|
||||
#endif
|
||||
//-----------------------------------------------------------------------------
|
||||
#if (IMR_MSK & ISTR_CTR)
|
||||
if (wIstr & ISTR_CTR & wInterrupt_Mask){
|
||||
/* servicing of the endpoint correct transfer interrupt */
|
||||
/* clear of the CTR flag into the sub */
|
||||
CTR_LP();
|
||||
//#ifdef CTR_CALLBACK
|
||||
// CTR_Callback();
|
||||
//#endif
|
||||
}
|
||||
#endif
|
||||
} /* USB_Istr */
|
||||
/*******************************************************************************
|
||||
EP1_IN_Callback: EP1 IN Callback Routine
|
||||
*******************************************************************************/
|
||||
void EP1_IN_Callback(void)
|
||||
{
|
||||
Mass_Storage_In();
|
||||
}
|
||||
/*******************************************************************************
|
||||
EP2_OUT_Callback: EP2 OUT Callback Routine.
|
||||
*******************************************************************************/
|
||||
void EP2_OUT_Callback(void)
|
||||
{
|
||||
Mass_Storage_Out();
|
||||
}
|
||||
/********************************* END OF FILE ******************************/
|
||||
|
||||
@@ -1,262 +0,0 @@
|
||||
/******************** (C) COPYRIGHT 2015 e-Design Co., Ltd. ********************
|
||||
File Name : USB_prop.c
|
||||
Version : STM32 USB Disk Ver 3.4 Author : MCD Application Team & bure
|
||||
*******************************************************************************/
|
||||
#include "usb_desc.h"
|
||||
#include "usb_pwr.h"
|
||||
#include "usb_bot.h"
|
||||
#include "usb_prop.h"
|
||||
#include "usb_lib.h"
|
||||
#include "Bios.h"
|
||||
#include "APP_Version.h"
|
||||
|
||||
u32 Max_Lun = 0;
|
||||
|
||||
DEVICE Device_Table ={ EP_NUM, 1 };
|
||||
DEVICE_PROP Device_Property ={
|
||||
MASS_init,
|
||||
MASS_Reset,
|
||||
MASS_Status_In,
|
||||
MASS_Status_Out,
|
||||
MASS_Data_Setup,
|
||||
MASS_NoData_Setup,
|
||||
MASS_Get_Interface_Setting,
|
||||
MASS_GetDeviceDescriptor,
|
||||
MASS_GetConfigDescriptor,
|
||||
MASS_GetStringDescriptor,
|
||||
0,
|
||||
0x40 // MAX PACKET SIZE
|
||||
};
|
||||
USER_STANDARD_REQUESTS User_Standard_Requests ={
|
||||
Mass_Storage_GetConfiguration,
|
||||
Mass_Storage_SetConfiguration,
|
||||
Mass_Storage_GetInterface,
|
||||
Mass_Storage_SetInterface,
|
||||
Mass_Storage_GetStatus,
|
||||
Mass_Storage_ClearFeature,
|
||||
Mass_Storage_SetEndPointFeature,
|
||||
Mass_Storage_SetDeviceFeature,
|
||||
Mass_Storage_SetDeviceAddress
|
||||
};
|
||||
ONE_DESCRIPTOR Device_Descriptor ={
|
||||
(u8*)MASS_DeviceDescriptor,
|
||||
MASS_SIZ_DEVICE_DESC
|
||||
};
|
||||
ONE_DESCRIPTOR Config_Descriptor ={
|
||||
(u8*)MASS_ConfigDescriptor,
|
||||
MASS_SIZ_CONFIG_DESC
|
||||
};
|
||||
ONE_DESCRIPTOR String_Descriptor[5] ={
|
||||
{(u8*)MASS_StringLangID, MASS_SIZ_STRING_LANGID},
|
||||
{(u8*)MASS_StringVendor, MASS_SIZ_STRING_VENDOR},
|
||||
{(u8*)MASS_StringProduct, MASS_SIZ_STRING_PRODUCT},
|
||||
{(u8*)MASS_StringSerial, MASS_SIZ_STRING_SERIAL},
|
||||
{(u8*)MASS_StringInterface, MASS_SIZ_STRING_INTERFACE},
|
||||
};
|
||||
|
||||
/*******************************************************************************
|
||||
MASS_init: Mass Storage init routine.
|
||||
*******************************************************************************/
|
||||
void MASS_init()
|
||||
{
|
||||
Get_SerialNum(); // Update the serial number string descriptor with the data from the unique ID
|
||||
pInformation->Current_Configuration = 0;
|
||||
PowerOn(); // Connect the device
|
||||
_SetISTR(0); // USB interrupts initialization. clear pending interrupts
|
||||
wInterrupt_Mask = IMR_MSK;
|
||||
_SetCNTR(wInterrupt_Mask); // set interrupts mask
|
||||
bDeviceState = UNCONNECTED;
|
||||
}
|
||||
/*******************************************************************************
|
||||
MASS_Reset: Mass Storage reset routine.
|
||||
*******************************************************************************/
|
||||
void MASS_Reset()
|
||||
{
|
||||
Device_Info.Current_Configuration = 0; // Set the device as not configured
|
||||
pInformation->Current_Feature = MASS_ConfigDescriptor[7]; // Current Feature initialization
|
||||
SetBTABLE(BTABLE_ADDRESS);
|
||||
// Initialize Endpoint 0
|
||||
SetEPType(ENDP0, EP_CONTROL);
|
||||
SetEPTxStatus(ENDP0, EP_TX_NAK);
|
||||
SetEPRxAddr(ENDP0, ENDP0_RXADDR);
|
||||
SetEPRxCount(ENDP0, Device_Property.MaxPacketSize);
|
||||
SetEPTxAddr(ENDP0, ENDP0_TXADDR);
|
||||
Clear_Status_Out(ENDP0);
|
||||
SetEPRxValid(ENDP0);
|
||||
//Initialize Endpoint 1
|
||||
SetEPType(ENDP1, EP_BULK);
|
||||
SetEPTxAddr(ENDP1, ENDP1_TXADDR);
|
||||
SetEPTxStatus(ENDP1, EP_TX_NAK);
|
||||
SetEPRxStatus(ENDP1, EP_RX_DIS);
|
||||
// Initialize Endpoint 2
|
||||
SetEPType(ENDP2, EP_BULK);
|
||||
SetEPRxAddr(ENDP2, ENDP2_RXADDR);
|
||||
SetEPRxCount(ENDP2, Device_Property.MaxPacketSize);
|
||||
SetEPRxStatus(ENDP2, EP_RX_VALID);
|
||||
SetEPTxStatus(ENDP2, EP_TX_DIS);
|
||||
|
||||
SetEPRxCount(ENDP0, Device_Property.MaxPacketSize);
|
||||
SetEPRxValid(ENDP0);
|
||||
// Set the device to response on default address
|
||||
SetDeviceAddress(0);
|
||||
|
||||
bDeviceState = ATTACHED;
|
||||
|
||||
CBW.dSignature = BOT_CBW_SIGNATURE;
|
||||
Bot_State = BOT_IDLE;
|
||||
}
|
||||
|
||||
/*******************************************************************************
|
||||
Mass_Storage_SetConfiguration: Handle the SetConfiguration request.
|
||||
*******************************************************************************/
|
||||
void Mass_Storage_SetConfiguration(void)
|
||||
{
|
||||
if (pInformation->Current_Configuration != 0){
|
||||
bDeviceState = CONFIGURED; // Device configured
|
||||
ClearDTOG_TX(ENDP1);
|
||||
ClearDTOG_RX(ENDP2);
|
||||
Bot_State = BOT_IDLE; // set the Bot state machine to the IDLE state
|
||||
}
|
||||
}
|
||||
/*******************************************************************************
|
||||
Mass_Storage_ClearFeature: Handle the ClearFeature request.
|
||||
*******************************************************************************/
|
||||
void Mass_Storage_ClearFeature(void)
|
||||
{
|
||||
/* when the host send a CBW with invalid signature or invalid length the two
|
||||
Endpoints (IN & OUT) shall stall until receiving a Mass Storage Reset */
|
||||
if (CBW.dSignature != BOT_CBW_SIGNATURE)
|
||||
Bot_Abort(BOTH_DIR);
|
||||
}
|
||||
/*******************************************************************************
|
||||
Mass_Storage_SetConfiguration: Udpade the device state to addressed.
|
||||
*******************************************************************************/
|
||||
void Mass_Storage_SetDeviceAddress (void)
|
||||
{
|
||||
bDeviceState = ADDRESSED;
|
||||
}
|
||||
/*******************************************************************************
|
||||
MASS_Status_In: Mass Storage Status IN routine.
|
||||
*******************************************************************************/
|
||||
void MASS_Status_In(void)
|
||||
{
|
||||
return;
|
||||
}
|
||||
/*******************************************************************************
|
||||
MASS_Status_Out: Mass Storage Status OUT routine.
|
||||
*******************************************************************************/
|
||||
void MASS_Status_Out(void)
|
||||
{
|
||||
return;
|
||||
}
|
||||
/*******************************************************************************
|
||||
MASS_Data_Setup: Handle the data class specific requests.
|
||||
*******************************************************************************/
|
||||
RESULT MASS_Data_Setup(u8 RequestNo)
|
||||
{
|
||||
u8* (*CopyRoutine)(u16);
|
||||
|
||||
CopyRoutine = NULL;
|
||||
if ((Type_Recipient == (CLASS_REQUEST | INTERFACE_RECIPIENT))
|
||||
&& (RequestNo == GET_MAX_LUN) && (pInformation->USBwValue == 0)
|
||||
&& (pInformation->USBwIndex == 0) && (pInformation->USBwLength == 0x01))
|
||||
{
|
||||
CopyRoutine = Get_Max_Lun;
|
||||
} else return USB_UNSUPPORT;
|
||||
if (CopyRoutine == NULL) return USB_UNSUPPORT;
|
||||
pInformation->Ctrl_Info.CopyData = CopyRoutine;
|
||||
pInformation->Ctrl_Info.Usb_wOffset = 0;
|
||||
(*CopyRoutine)(0);
|
||||
return USB_SUCCESS;
|
||||
}
|
||||
/*******************************************************************************
|
||||
MASS_NoData_Setup: Handle the no data class specific requests.
|
||||
*******************************************************************************/
|
||||
RESULT MASS_NoData_Setup(u8 RequestNo)
|
||||
{
|
||||
if ((Type_Recipient == (CLASS_REQUEST | INTERFACE_RECIPIENT))
|
||||
&& (RequestNo == MASS_STORAGE_RESET) && (pInformation->USBwValue == 0)
|
||||
&& (pInformation->USBwIndex == 0) && (pInformation->USBwLength == 0x00))
|
||||
{
|
||||
ClearDTOG_TX(ENDP1); // Initialize Endpoint 1
|
||||
ClearDTOG_RX(ENDP2); // Initialize Endpoint 2
|
||||
CBW.dSignature = BOT_CBW_SIGNATURE; // intialise the CBW signature to enable the clear feature
|
||||
Bot_State = BOT_IDLE;
|
||||
return USB_SUCCESS;
|
||||
}
|
||||
return USB_UNSUPPORT;
|
||||
}
|
||||
/*******************************************************************************
|
||||
MASS_Get_Interface_Setting: Test the interface and the alternate setting
|
||||
according to the supported one.
|
||||
*******************************************************************************/
|
||||
RESULT MASS_Get_Interface_Setting(u8 Interface, u8 AlternateSetting)
|
||||
{
|
||||
if (AlternateSetting > 0) return USB_UNSUPPORT;// in this application we don't have AlternateSetting
|
||||
else if (Interface > 0) return USB_UNSUPPORT; // in this application we have only 1 interfaces
|
||||
return USB_SUCCESS;
|
||||
}
|
||||
/*******************************************************************************
|
||||
MASS_GetDeviceDescriptor: Get the device descriptor.
|
||||
*******************************************************************************/
|
||||
u8 *MASS_GetDeviceDescriptor(u16 Length)
|
||||
{
|
||||
return Standard_GetDescriptorData(Length, &Device_Descriptor );
|
||||
}
|
||||
/*******************************************************************************
|
||||
MASS_GetConfigDescriptor: Get the configuration descriptor.
|
||||
*******************************************************************************/
|
||||
u8 *MASS_GetConfigDescriptor(u16 Length)
|
||||
{
|
||||
return Standard_GetDescriptorData(Length, &Config_Descriptor );
|
||||
}
|
||||
|
||||
/*******************************************************************************
|
||||
MASS_GetStringDescriptor: Get the string descriptors according to
|
||||
the needed index.
|
||||
*******************************************************************************/
|
||||
u8 *MASS_GetStringDescriptor(u16 Length)
|
||||
{
|
||||
u8 wValue0 = pInformation->USBwValue0;
|
||||
if (wValue0 > 5) return NULL;
|
||||
else return Standard_GetDescriptorData(Length, &String_Descriptor[wValue0]);
|
||||
}
|
||||
/*******************************************************************************
|
||||
Get_Max_Lun: Handle the Get Max Lun request.
|
||||
*******************************************************************************/
|
||||
u8 *Get_Max_Lun(u16 Length)
|
||||
{
|
||||
if (Length == 0){
|
||||
pInformation->Ctrl_Info.Usb_wLength = LUN_DATA_LENGTH;
|
||||
return 0;
|
||||
} else return((u8*)(&Max_Lun));
|
||||
}
|
||||
/*******************************************************************************
|
||||
Get_SerialNum : Create the serial number string descriptor.
|
||||
*******************************************************************************/
|
||||
void Get_SerialNum(void)
|
||||
{
|
||||
u32 Device_Serial0, Device_Serial1, Device_Serial2;
|
||||
|
||||
Device_Serial0 = SERIAL_NO1;
|
||||
Device_Serial1 = SERIAL_NO2;
|
||||
Device_Serial2 = SERIAL_NO3;
|
||||
|
||||
if (Device_Serial0 != 0){
|
||||
MASS_StringSerial[ 2] = (u8)( Device_Serial0 & 0x000000FF);
|
||||
MASS_StringSerial[ 4] = (u8)((Device_Serial0 & 0x0000FF00) >> 8);
|
||||
MASS_StringSerial[ 6] = (u8)((Device_Serial0 & 0x00FF0000) >> 16);
|
||||
MASS_StringSerial[ 8] = (u8)((Device_Serial0 & 0xFF000000) >> 24);
|
||||
|
||||
MASS_StringSerial[10] = (u8)( Device_Serial1 & 0x000000FF);
|
||||
MASS_StringSerial[12] = (u8)((Device_Serial1 & 0x0000FF00) >> 8);
|
||||
MASS_StringSerial[14] = (u8)((Device_Serial1 & 0x00FF0000) >> 16);
|
||||
MASS_StringSerial[16] = (u8)((Device_Serial1 & 0xFF000000) >> 24);
|
||||
|
||||
MASS_StringSerial[18] = (u8)( Device_Serial2 & 0x000000FF);
|
||||
MASS_StringSerial[20] = (u8)((Device_Serial2 & 0x0000FF00) >> 8);
|
||||
MASS_StringSerial[22] = (u8)((Device_Serial2 & 0x00FF0000) >> 16);
|
||||
MASS_StringSerial[24] = (u8)((Device_Serial2 & 0xFF000000) >> 24);
|
||||
}
|
||||
}
|
||||
/********************************* END OF FILE ******************************/
|
||||
@@ -1,152 +0,0 @@
|
||||
/******************** (C) COPYRIGHT 2015 e-Design Co., Ltd. ********************
|
||||
File Name : USB_pwr.c
|
||||
Version : STM32 USB Disk Ver 3.4 Author : MCD Application Team & bure
|
||||
*******************************************************************************/
|
||||
#include "usb_lib.h"
|
||||
#include "usb_conf.h"
|
||||
#include "usb_pwr.h"
|
||||
|
||||
vu32 bDeviceState = UNCONNECTED; // USB device status
|
||||
vu8 fSuspendEnabled = TRUE; // true when suspend is possible
|
||||
|
||||
struct{
|
||||
volatile RESUME_STATE eState;
|
||||
volatile u8 bESOFcnt;
|
||||
} ResumeS;
|
||||
|
||||
/*******************************************************************************
|
||||
PowerOn Return : USB_SUCCESS
|
||||
|
||||
*******************************************************************************/
|
||||
RESULT PowerOn(void)
|
||||
{
|
||||
u16 wRegVal;
|
||||
|
||||
/*** CNTR_PWDN = 0 ***/
|
||||
wRegVal = CNTR_FRES;
|
||||
_SetCNTR(wRegVal);
|
||||
/*** CNTR_FRES = 0 ***/
|
||||
wInterrupt_Mask = 0;
|
||||
_SetCNTR(wInterrupt_Mask);
|
||||
/*** Clear pending interrupts ***/
|
||||
_SetISTR(0);
|
||||
/*** Set interrupt mask ***/
|
||||
wInterrupt_Mask = CNTR_RESETM | CNTR_SUSPM | CNTR_WKUPM;
|
||||
_SetCNTR(wInterrupt_Mask);
|
||||
|
||||
return USB_SUCCESS;
|
||||
}
|
||||
/*******************************************************************************
|
||||
PowerOff: handles switch-off conditions Return : USB_SUCCESS
|
||||
*******************************************************************************/
|
||||
RESULT PowerOff()
|
||||
{
|
||||
/* disable all ints and force USB reset */
|
||||
_SetCNTR(CNTR_FRES);
|
||||
/* clear interrupt status register */
|
||||
_SetISTR(0);
|
||||
/* Disable the Pull-Up*/
|
||||
// USB_Cable_Config(DISABLE);
|
||||
/* switch-off device */
|
||||
_SetCNTR(CNTR_FRES + CNTR_PDWN);
|
||||
/* sw variables reset */
|
||||
/* ... */
|
||||
|
||||
return USB_SUCCESS;
|
||||
}
|
||||
/*******************************************************************************
|
||||
Suspend: sets suspend mode operating conditions
|
||||
Return : USB_SUCCESS.
|
||||
*******************************************************************************/
|
||||
void Suspend(void)
|
||||
{
|
||||
u16 wCNTR;
|
||||
/* suspend preparation */
|
||||
/* macrocell enters suspend mode */
|
||||
wCNTR = _GetCNTR();
|
||||
wCNTR |= CNTR_FSUSP;
|
||||
_SetCNTR(wCNTR);
|
||||
/* ------------------ ONLY WITH BUS-POWERED DEVICES ---------------------- */
|
||||
/* power reduction */
|
||||
/* ... on connected devices */
|
||||
/* force low-power mode in the macrocell */
|
||||
wCNTR = _GetCNTR();
|
||||
wCNTR |= CNTR_LPMODE;
|
||||
_SetCNTR(wCNTR);
|
||||
}
|
||||
/*******************************************************************************
|
||||
Resume_Init: Handles wake-up restoring normal operations
|
||||
* Return : USB_SUCCESS.
|
||||
*******************************************************************************/
|
||||
void Resume_Init(void)
|
||||
{
|
||||
u16 wCNTR;
|
||||
/* ------------------ ONLY WITH BUS-POWERED DEVICES ---------------------- */
|
||||
/* restart the clocks */
|
||||
/* CNTR_LPMODE = 0 */
|
||||
wCNTR = _GetCNTR();
|
||||
wCNTR &= (~CNTR_LPMODE);
|
||||
_SetCNTR(wCNTR);
|
||||
/* restore full power */
|
||||
/* ... on connected devices */
|
||||
/* reset FSUSP bit */
|
||||
_SetCNTR(IMR_MSK);
|
||||
/* reverse suspend preparation */
|
||||
/* ... */
|
||||
}
|
||||
/*******************************************************************************
|
||||
Resume: This is the state machine handling resume operations and
|
||||
timing sequence. The control is based on the Resume structure
|
||||
variables and on the ESOF interrupt calling this subroutine
|
||||
without changing machine state.
|
||||
Input: a state machine value (RESUME_STATE)
|
||||
RESUME_ESOF doesn't change ResumeS.eState allowing
|
||||
decrementing of the ESOF counter in different states.
|
||||
*******************************************************************************/
|
||||
void Resume(RESUME_STATE eResumeSetVal)
|
||||
{
|
||||
u16 wCNTR;
|
||||
|
||||
if (eResumeSetVal != RESUME_ESOF) ResumeS.eState = eResumeSetVal;
|
||||
switch (ResumeS.eState){
|
||||
case RESUME_EXTERNAL:
|
||||
Resume_Init();
|
||||
ResumeS.eState = RESUME_OFF;
|
||||
break;
|
||||
case RESUME_INTERNAL:
|
||||
Resume_Init();
|
||||
ResumeS.eState = RESUME_START;
|
||||
break;
|
||||
case RESUME_LATER:
|
||||
ResumeS.bESOFcnt = 2;
|
||||
ResumeS.eState = RESUME_WAIT;
|
||||
break;
|
||||
case RESUME_WAIT:
|
||||
ResumeS.bESOFcnt--;
|
||||
if (ResumeS.bESOFcnt == 0)
|
||||
ResumeS.eState = RESUME_START;
|
||||
break;
|
||||
case RESUME_START:
|
||||
wCNTR = _GetCNTR();
|
||||
wCNTR |= CNTR_RESUME;
|
||||
_SetCNTR(wCNTR);
|
||||
ResumeS.eState = RESUME_ON;
|
||||
ResumeS.bESOFcnt = 10;
|
||||
break;
|
||||
case RESUME_ON:
|
||||
ResumeS.bESOFcnt--;
|
||||
if (ResumeS.bESOFcnt == 0){
|
||||
wCNTR = _GetCNTR();
|
||||
wCNTR &= (~CNTR_RESUME);
|
||||
_SetCNTR(wCNTR);
|
||||
ResumeS.eState = RESUME_OFF;
|
||||
}
|
||||
break;
|
||||
case RESUME_OFF:
|
||||
case RESUME_ESOF:
|
||||
default:
|
||||
ResumeS.eState = RESUME_OFF;
|
||||
break;
|
||||
}
|
||||
}
|
||||
/********************************* END OF FILE ******************************/
|
||||
@@ -1,230 +0,0 @@
|
||||
/******************** (C) COPYRIGHT 2015 e-Design Co., Ltd. ********************
|
||||
File Name : USB_scsi.c
|
||||
Version : STM32 USB Disk Ver 3.4 Author : MCD Application Team & bure
|
||||
*******************************************************************************/
|
||||
#include "usb_scsi.h"
|
||||
#include "usb_bot.h"
|
||||
#include "usb_regs.h"
|
||||
#include "usb_lib.h"
|
||||
#include "Disk.h"
|
||||
|
||||
u8 Page00_Inquiry_Data[] ={ 0, 0, 0, 0, 0};
|
||||
u8 Mode_Sense6_data[] ={0x03, 0x00, 0x00, 0x00};
|
||||
u8 Mode_Sense10_data[] ={0x00, 0x06, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00};
|
||||
u8 Scsi_Sense_Data[] ={0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0A, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00};
|
||||
u8 ReadCapacity10_Data[] ={ 0, 0, 0, 0, 0, 0, 0, 0};
|
||||
u8 ReadFormatCapacity[] ={ 0, 0, 0, 8, 0, 0, 0, 0, 2, 0, 0, 0};
|
||||
|
||||
#ifdef DFU_MODE
|
||||
uc8 Disk_Inquiry_Str[] ={0x00, 0x80, 0x02, 0x02, 36-4, 0x00, 0x00, 0x00,
|
||||
'V', 'i', 'r', 't', 'u', 'a', 'l', ' ',
|
||||
'D', 'F', 'U', ' ', 'D', 'i', 's', 'k',
|
||||
' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ',
|
||||
' ', ' ', ' ', ' ', };
|
||||
#else
|
||||
uc8 Disk_Inquiry_Str[] ={0x00, 0x80, 0x02, 0x02, 36-4, 0x00, 0x00, 0x00,
|
||||
'M', 'i', 'n', 'i', ' ', 'D', 'S', 'O',
|
||||
'D', 'i', 's', 'k', ' ', ' ', ' ', ' ',
|
||||
' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ',
|
||||
' ', ' ', ' ', ' ', };
|
||||
#endif
|
||||
|
||||
/*******************************************************************************
|
||||
SCSI_Inquiry_Cmd: SCSI Inquiry Command routine.
|
||||
*******************************************************************************/
|
||||
void SCSI_Inquiry_Cmd(void)
|
||||
{
|
||||
u8* Inquiry_Data;
|
||||
u16 Inquiry_Data_Length;
|
||||
|
||||
if (CBW.CB[1] & 0x01){ // Evpd is set
|
||||
Inquiry_Data = Page00_Inquiry_Data;
|
||||
Inquiry_Data_Length = 5;
|
||||
} else {
|
||||
Inquiry_Data = (u8*)Disk_Inquiry_Str;
|
||||
if (CBW.CB[4] <= STANDARD_INQUIRY_DATA_LEN) Inquiry_Data_Length = CBW.CB[4];
|
||||
else Inquiry_Data_Length = STANDARD_INQUIRY_DATA_LEN;
|
||||
}
|
||||
Transfer_Data_Request(Inquiry_Data, Inquiry_Data_Length);
|
||||
}
|
||||
/*******************************************************************************
|
||||
SCSI_ReadFormatCapacity_Cmd: SCSI ReadFormatCapacity Command routine.
|
||||
*******************************************************************************/
|
||||
void SCSI_ReadFormatCapacity_Cmd(void)
|
||||
{
|
||||
ReadFormatCapacity[ 4] = (u8)(SECTOR_SIZE >> 24);
|
||||
ReadFormatCapacity[ 5] = (u8)(SECTOR_SIZE >> 16);
|
||||
ReadFormatCapacity[ 6] = (u8)(SECTOR_SIZE >> 8);
|
||||
ReadFormatCapacity[ 7] = (u8)(SECTOR_SIZE);
|
||||
|
||||
ReadFormatCapacity[ 9] = (u8)(SECTOR_SIZE >> 16);
|
||||
ReadFormatCapacity[10] = (u8)(SECTOR_SIZE >> 8);
|
||||
ReadFormatCapacity[11] = (u8)(SECTOR_SIZE);
|
||||
|
||||
Transfer_Data_Request(ReadFormatCapacity, READ_FORMAT_CAPACITY_DATA_LEN);
|
||||
}
|
||||
/*******************************************************************************
|
||||
SCSI_ReadCapacity10_Cmd: SCSI ReadCapacity10 Command routine.
|
||||
*******************************************************************************/
|
||||
void SCSI_ReadCapacity10_Cmd(void)
|
||||
{
|
||||
ReadCapacity10_Data[0] = (u8)(SECTOR_CNT - 1 >> 24);
|
||||
ReadCapacity10_Data[1] = (u8)(SECTOR_CNT - 1 >> 16);
|
||||
ReadCapacity10_Data[2] = (u8)(SECTOR_CNT - 1 >> 8);
|
||||
ReadCapacity10_Data[3] = (u8)(SECTOR_CNT - 1);
|
||||
|
||||
ReadCapacity10_Data[4] = (u8)(SECTOR_SIZE >> 24);
|
||||
ReadCapacity10_Data[5] = (u8)(SECTOR_SIZE >> 16);
|
||||
ReadCapacity10_Data[6] = (u8)(SECTOR_SIZE >> 8);
|
||||
ReadCapacity10_Data[7] = (u8)(SECTOR_SIZE);
|
||||
|
||||
Transfer_Data_Request(ReadCapacity10_Data, READ_CAPACITY10_DATA_LEN);
|
||||
}
|
||||
/*******************************************************************************
|
||||
SCSI_ModeSense6_Cmd: SCSI ModeSense6 Command routine.
|
||||
*******************************************************************************/
|
||||
void SCSI_ModeSense6_Cmd (void)
|
||||
{
|
||||
Transfer_Data_Request(Mode_Sense6_data, MODE_SENSE6_DATA_LEN);
|
||||
}
|
||||
/*******************************************************************************
|
||||
SCSI_ModeSense10_Cmd: SCSI ModeSense10 Command routine.
|
||||
*******************************************************************************/
|
||||
void SCSI_ModeSense10_Cmd (void)
|
||||
{
|
||||
Transfer_Data_Request(Mode_Sense10_data, MODE_SENSE10_DATA_LEN);
|
||||
}
|
||||
/*******************************************************************************
|
||||
SCSI_RequestSense_Cmd: SCSI RequestSense Command routine.
|
||||
*******************************************************************************/
|
||||
void SCSI_RequestSense_Cmd (void)
|
||||
{
|
||||
u8 Request_Sense_data_Length;
|
||||
|
||||
if (CBW.CB[4] <= REQUEST_SENSE_DATA_LEN) Request_Sense_data_Length = CBW.CB[4];
|
||||
else Request_Sense_data_Length = REQUEST_SENSE_DATA_LEN;
|
||||
|
||||
Transfer_Data_Request(Scsi_Sense_Data, Request_Sense_data_Length);
|
||||
}
|
||||
|
||||
/*******************************************************************************
|
||||
Set_Scsi_Sense_Data: Set Scsi Sense Data routine.
|
||||
*******************************************************************************/
|
||||
void Set_Scsi_Sense_Data(u8 Sens_Key, u8 Asc)
|
||||
{
|
||||
Scsi_Sense_Data[2] = Sens_Key;
|
||||
Scsi_Sense_Data[12] = Asc;
|
||||
}
|
||||
/*******************************************************************************
|
||||
SCSI_Start_Stop_Unit_Cmd: SCSI Start_Stop_Unit Command routine.
|
||||
*******************************************************************************/
|
||||
void SCSI_Start_Stop_Unit_Cmd(void)
|
||||
{
|
||||
Set_CSW (CSW_CMD_PASSED, SEND_CSW_ENABLE);
|
||||
}
|
||||
/*******************************************************************************
|
||||
SCSI_Read10_Cmd: SCSI Read10 Command routine.
|
||||
*******************************************************************************/
|
||||
void SCSI_Read10_Cmd(u32 LBA , u32 BlockNbr)
|
||||
{
|
||||
if (Bot_State == BOT_IDLE){
|
||||
if (!(SCSI_Address_Management(SCSI_READ10, LBA, BlockNbr))) return;//address out of range
|
||||
if ((CBW.bmFlags & 0x80) != 0){
|
||||
Bot_State = BOT_DATA_IN;
|
||||
Read_Memory(LBA , BlockNbr);
|
||||
} else {
|
||||
Bot_Abort(BOTH_DIR);
|
||||
Set_Scsi_Sense_Data(ILLEGAL_REQUEST, INVALID_FIELED_IN_COMMAND);
|
||||
Set_CSW (CSW_CMD_FAILED, SEND_CSW_ENABLE);
|
||||
}
|
||||
return;
|
||||
} else if (Bot_State == BOT_DATA_IN) Read_Memory(LBA , BlockNbr);
|
||||
}
|
||||
/*******************************************************************************
|
||||
SCSI_Write10_Cmd: SCSI Write10 Command routine.
|
||||
*******************************************************************************/
|
||||
void SCSI_Write10_Cmd(u32 LBA , u32 BlockNbr)
|
||||
{
|
||||
if (Bot_State == BOT_IDLE){
|
||||
if (!(SCSI_Address_Management(SCSI_WRITE10 , LBA, BlockNbr))) return;//address out of range
|
||||
if ((CBW.bmFlags & 0x80) == 0){
|
||||
Bot_State = BOT_DATA_OUT;
|
||||
SetEPRxStatus(ENDP2, EP_RX_VALID);
|
||||
} else {
|
||||
Bot_Abort(DIR_IN);
|
||||
Set_Scsi_Sense_Data(ILLEGAL_REQUEST, INVALID_FIELED_IN_COMMAND);
|
||||
Set_CSW (CSW_CMD_FAILED, SEND_CSW_DISABLE);
|
||||
}
|
||||
return;
|
||||
} else if (Bot_State == BOT_DATA_OUT) Write_Memory(LBA , BlockNbr);
|
||||
}
|
||||
/*******************************************************************************
|
||||
SCSI_Verify10_Cmd: SCSI Verify10 Command routine.
|
||||
*******************************************************************************/
|
||||
void SCSI_Verify10_Cmd(void)
|
||||
{
|
||||
if ((CBW.dDataLength == 0) && !(CBW.CB[1] & BLKVFY)){ // BLKVFY not set
|
||||
Set_CSW (CSW_CMD_PASSED, SEND_CSW_ENABLE);
|
||||
} else {
|
||||
Bot_Abort(BOTH_DIR);
|
||||
Set_Scsi_Sense_Data(ILLEGAL_REQUEST, INVALID_FIELED_IN_COMMAND);
|
||||
Set_CSW (CSW_CMD_FAILED, SEND_CSW_DISABLE);
|
||||
}
|
||||
}
|
||||
/*******************************************************************************
|
||||
SCSI_Valid_Cmd: Valid Commands routine.
|
||||
*******************************************************************************/
|
||||
void SCSI_Valid_Cmd(void)
|
||||
{
|
||||
if (CBW.dDataLength != 0){
|
||||
Bot_Abort(BOTH_DIR);
|
||||
Set_Scsi_Sense_Data(ILLEGAL_REQUEST, INVALID_COMMAND);
|
||||
Set_CSW (CSW_CMD_FAILED, SEND_CSW_DISABLE);
|
||||
} else Set_CSW (CSW_CMD_PASSED, SEND_CSW_ENABLE);
|
||||
}
|
||||
/*******************************************************************************
|
||||
SCSI_Valid_Cmd: Valid Commands routine.
|
||||
*******************************************************************************/
|
||||
void SCSI_TestUnitReady_Cmd(void)
|
||||
{
|
||||
Set_CSW (CSW_CMD_PASSED, SEND_CSW_ENABLE);
|
||||
}
|
||||
/*******************************************************************************
|
||||
SCSI_Invalid_Cmd: Invalid Commands routine
|
||||
*******************************************************************************/
|
||||
void SCSI_Invalid_Cmd(void)
|
||||
{
|
||||
if (CBW.dDataLength == 0) Bot_Abort(DIR_IN);
|
||||
else{
|
||||
if ((CBW.bmFlags & 0x80) != 0) Bot_Abort(DIR_IN);
|
||||
else Bot_Abort(BOTH_DIR);
|
||||
}
|
||||
Set_Scsi_Sense_Data(ILLEGAL_REQUEST, INVALID_COMMAND);
|
||||
Set_CSW (CSW_CMD_FAILED, SEND_CSW_DISABLE);
|
||||
}
|
||||
/*******************************************************************************
|
||||
SCSI_Address_Management: Test the received address.
|
||||
Input: Cmd the command can be SCSI_READ10 or SCSI_WRITE10.
|
||||
Return: Read\Write status (bool).
|
||||
*******************************************************************************/
|
||||
u8 SCSI_Address_Management(u8 Cmd , u32 LBA , u32 BlockNbr)
|
||||
{
|
||||
|
||||
if ((LBA + BlockNbr) > SECTOR_CNT){
|
||||
if (Cmd == SCSI_WRITE10) Bot_Abort(BOTH_DIR);
|
||||
Bot_Abort(DIR_IN);
|
||||
Set_Scsi_Sense_Data(ILLEGAL_REQUEST, ADDRESS_OUT_OF_RANGE);
|
||||
Set_CSW (CSW_CMD_FAILED, SEND_CSW_DISABLE);
|
||||
return (FALSE);
|
||||
}
|
||||
if (CBW.dDataLength != BlockNbr * SECTOR_SIZE){
|
||||
if (Cmd == SCSI_WRITE10) Bot_Abort(BOTH_DIR);
|
||||
else Bot_Abort(DIR_IN);
|
||||
Set_Scsi_Sense_Data(ILLEGAL_REQUEST, INVALID_FIELED_IN_COMMAND);
|
||||
Set_CSW (CSW_CMD_FAILED, SEND_CSW_DISABLE);
|
||||
return (FALSE);
|
||||
}
|
||||
return (TRUE);
|
||||
}
|
||||
/********************************* END OF FILE ******************************/
|
||||
@@ -10,4 +10,6 @@ transport select "hla_swd"
|
||||
source [find target/stm32f1x_stlink.cfg]
|
||||
|
||||
# use hardware reset, connect under reset
|
||||
reset_config srst_only srst_nogate
|
||||
#reset_config srst_only srst_nogate
|
||||
#software
|
||||
reset_config none separate
|
||||
Reference in New Issue
Block a user