Ben V. Brown
80e7ab3161
Force delay after display state change
...
So that we backoff if OLED is busy
Update OLED.hpp
2022-11-06 22:53:43 +11:00
Ben V. Brown
7eb9f3f10d
Only send on display change
2022-11-06 22:10:09 +11:00
Ben V. Brown
19a6e169a7
Update PD for better EPR compatibility
2022-09-07 18:22:52 +10:00
Ben V. Brown
1fbcdcdf98
Pinecil V2 ( #1341 )
...
* Add SDK
* fork
* massaging makefile
* Drop git module
* Bring in sdk as its broken
Far, Far to much crap to fix with regex now
* Remove bl706
* rf_para_flash_t is missing defs
* Remove crapton of junk
* Remove yet more
* Poking I2C
* Update peripheral_config.h
* Update pinmux_config.h
* Update preRTOS.cpp
* Update main.hpp
* Setup template
* Verbose boot
* I2C ish
* Update I2C_Wrapper.cpp
* Update main.cpp
* Turn off I2C reading for now
* Display running
* Roughing out scheduling timer0
* Starting ADC setup
* Working scheduling of ADC 🎉
* Format adc headers
* Update IRQ.cpp
* Buttons working
* Slow down I2C
* Poking IRQ
* Larger stack required
* Accel on
* Trying to chase down why __libc_init_array isnt working yet
* Working c++
* Cleanup
* Bump stacks
* I2C wake part workaround
* Cleanup
* Working PWM init
* qc draft
* Hookup PWM
* Stable enough ADC
* ADC timing faster + timer without HAL
* Silence
* Remove boot banner
* Tuning in ADC
* Wake PID after ADC
* Remove unused hal
* Draft flash settings
* Working settings save & restore
* Update to prod model
* Cleanup
* NTC thermistor
* Correct adc gain
* Rough tip resistance progress
* Scratch out resistance awareness of the tip
* better adc settings
* Tweaking ADC
* ADC tweaking
* Make adc range scalable
* Update Dockerfile
* Update configuration.h
* Can read same ADC twice in a row
* ADC Setup
* Update PIDThread.cpp
* Lesser adc backoff
* Update USBPD.h
* Add device ID
* Update BSP_Power.h
* Update BSP.cpp
* DrawHex dynamicLength
* Shorter ID padding
* Show validation code
* tip measurement
* Create access for w0w1
* Expose w0 w1
* Enable debug
* crc32
* Device validation
* wip starting epr
* Logic refactor
* Safer PWM Init
* PD cleanups
* Update bl702_pwm.c
* Update power.cpp
* Update usb-pd
* io
* EPR decode
* Better gui for showing pd specs
* Rough handler for capabilities
* EPR
* Fix > 25V input
* Perform pow step after PPS
* Update BSP.cpp
* Fix timer output
* QC3
* Add tip resistance view
* Hold PD negotiation until detection is done for tip res
* Get Thermal mass
* Tip res =0 protection
* Update PIDThread.cpp
* Update GUIThread.cpp
* Rewrite tip resistance measurement
* Update GUIThread.cpp
* Fix fallback
* Far better tip resistance measurement
* Fix QC 0.6V D-
* Convert the interpolator to int32
* Correct the NTC lookup
* Update BSP.cpp
* Update Setup.cpp
* .
Update configuration #defines
More backported functions
* Update usb-pd
* More missed updates
* Refactor BSP
Magic BSP -> PinecilV2
Pine64 BSP -> Pinecil
Update Makefile
* Add Pinecilv2 to CI
* Pinecil v2 multi-lang
Update push.yml
* Update HallSensor.md
* Update README.md
* Fix wrong prestartcheck default
* Fix logo mapping
* Update Makefile
* Remove unused font block
* Style
* Style
* Remove unused timer funcs
* More culling TS80P
* Revert "More culling TS80P"
This reverts commit 2078b89be70c693a89cc
2022-08-19 15:39:37 +10:00
Ben V. Brown
7fcd2b7c5b
Animation non block ( #1347 )
...
* Buttons cancel animation
* Button cancels transition
* Update OLED.cpp
2022-08-12 10:36:10 +10:00
discip
e43449011e
solves artifacts issue if .gif is exactly 1024 B ( #1362 )
...
* solves artifacts issue if .gif is exactly 1024 B
solves https://github.com/Ralim/IronOS-Meta/issues/18
* increased animation speed a tad
2022-08-10 10:16:05 +10:00
Ben V. Brown
f1ceb0ec62
Merge branch 'dev' into pd-epr
2022-07-25 17:34:13 +10:00
Ben V. Brown
081290d6be
Merge branch 'dev' into ticktype
2022-07-25 17:00:34 +10:00
Ben V. Brown
dd239375b1
All Ticks as the right TickType
...
Update usb-pd
2022-07-25 16:45:29 +10:00
nyanpasu64
06e3ca59ea
Fix button presses between short and long being ignored entirely
2022-07-24 15:34:39 -07:00
nyanpasu64
c855f4cffe
Don't send short-presses after releasing long-presses
2022-07-24 15:16:11 -07:00
nyanpasu64
6d6f42d242
Cleanup getButtonState()
2022-07-24 15:12:27 -07:00
Ben V. Brown
c89a6d855c
Update usb-pd
2022-07-19 20:58:47 +10:00
Ben V. Brown
77af6223a4
Merge in draft EPR
2022-07-18 22:58:01 +10:00
Ben V. Brown
0590f9b3f8
Update usb-pd
2022-07-18 22:55:01 +10:00
Ben V. Brown
078b8f5626
DeviceID ( #1314 )
...
* Ability to print hex
* Add device ID getter
* Refactor debug menu
* No longer need patch
* Update make_translation.py
* Fix typo
* Fix hex drawing
2022-06-16 21:39:53 +10:00
Ben V. Brown
f5cb42c9d7
Infinite logo ( #1309 )
...
* Check for button timeout of infinite
* Dedupe
* Alpine bump
2022-06-16 20:21:30 +10:00
discip
9ec92298f3
Update Font.h
2022-05-04 00:17:34 +02:00
Ben V. Brown
a73f634cff
Pinecil pd tweaking ( #1272 )
...
* Raise PD max to 21V
* gui -> settingsGUI
* VBus probe cache
* Rough pass PD capabilities display
* Cleanup build errors
* PD Debug menu working
* Update make_translation.py
* settingsGUI
* Update GUIThread.cpp
* Nicer debug prints
* Show VBus in PD debug
* Update GUIThread.cpp
* Update make_translation.py
* Add docs
* Build tweaks for TS80P 😢
* Show PPS ranges
2022-04-03 12:58:07 +10:00
Ben V. Brown
787bc46bdc
SC7A20 tweaks ( #1251 )
...
* Clean up handling of addresses
* Update SC7A20.hpp
* Try remapped Accel readings
* Fake LIS setup?
* Refining build options
2022-04-03 12:37:27 +10:00
discip
0b8192b690
Bootup logo settings ( #1241 )
...
Adds ability to adjust the time shown for the bootup logo.
2022-04-02 12:39:14 +11:00
Ben V. Brown
232009bf54
Logo rework ( #1232 )
...
!Allows for new logo format that supports animation!
Also moves logos out of repo into their own repo for ease of management.
Changes:
* Remove deprecated logos
* Draft new Bootloader decoder
* Use new logo handler
* Simplify logo code further
* Fix time bug on static images
* Fix exit at end of animation
* Docs
* Interframe delay in 5ms increments
* Quick pass handling empty updates
* Exit at the end _after_ the frame delay
* One final delay
* Fix for overrun of logo data
* Fixes https://github.com/Ralim/IronOS-Meta/issues/7
2022-03-14 09:08:05 +11:00
Ben V. Brown
3747d22773
Flip SC7
2022-02-12 11:30:03 +11:00
Ben V. Brown
730f7cf415
SC7A20 handle address
2022-02-12 11:13:41 +11:00
Ben V. Brown
ba119007ff
Step 1: make LIS2DH12 driver stricter
2022-02-12 11:04:28 +11:00
Ben V. Brown
1969d860c7
Update USBPD.cpp
2022-02-06 14:41:52 +11:00
Ben V. Brown
a2918ae8a4
Update usb-pd
2022-02-06 14:41:49 +11:00
Ben V. Brown
3c83b59b53
Expose Vbus
2022-02-06 13:14:53 +11:00
Ben V. Brown
49c80d2d3f
Update OLED.hpp
2022-02-05 12:39:40 +11:00
Ben V. Brown
80acf58b43
Update OLED.hpp
2022-02-05 12:37:41 +11:00
Ben V. Brown
15763dd55b
Cleanup OLED_FLIP logic
...
Update OLED.hpp
Update OLED.hpp
Update OLED.hpp
2022-02-05 12:23:51 +11:00
discip
c02628f5bf
Update Font.h
2022-01-19 23:51:46 +01:00
discip
2fe86b748e
Update Font.h
2022-01-19 23:11:09 +01:00
discip
1c5361613c
Update Font.h
2022-01-19 23:09:16 +01:00
discip
af413a1b4b
Update Font.h
2022-01-19 22:39:40 +01:00
discip
4feb68923b
Update Font.h
2022-01-19 02:16:31 +01:00
discip
385bcfa59e
Update Font.h
2022-01-19 02:07:38 +01:00
discip
59c7c7245a
updated idle screen & missing tip for TS80P
2022-01-14 23:36:15 +01:00
discip
c0095bd98f
removed flipped DisconnecetedTip hex code
2022-01-08 16:55:40 +01:00
discip
00b8115e7c
all three
2021-12-26 23:24:55 +01:00
discip
e2613d2f31
update
2021-12-26 16:59:03 +01:00
discip
cc3988be24
maybe this time
2021-12-22 03:44:36 +01:00
discip
bf1fc1c157
just preparing
2021-12-22 03:12:31 +01:00
discip
95ccb528e1
updated graphics for idle screen & for missing tip
2021-12-22 00:03:28 +01:00
Ben V. Brown
47929e9ee0
Update PD stack
2021-12-19 10:57:57 +11:00
discip
63f777d553
Update Font.h
2021-10-28 20:55:38 +02:00
discip
6fe01721e7
Update Font.h
2021-10-28 19:47:40 +02:00
Ben V. Brown
3594604efc
Fixes for I2C on Pinecil + USB-PD stack ( #1099 )
...
* Remove unused includes
* Adding in submodule
* Move fusb functions to the BSP
* Remove old code
* Creating IronOS PD integration wrapper
* Redirect to wrapper
* pd lib updates
* fix Docker build
* Finish linking across
* Cleanup
* Update Makefile
* Update push.yml
* Update push.yml
* PD -> Compensate for different tick rates
* Update codeql-analysis.yml
* Fix PD #define for @Firebie
* Check irq low at start
* Update BSP.h
* Update main.cpp
* Closer delay
* Update OLED.cpp
* Bugfix trying to start QC too early
* Missing fusb shouldnt hang qc
* Update FreeRTOSConfig.h
* Update the GD drivers
* Update Pinecil IRQ setup
* Redirect printf() to uart
* Update Power.cpp
* Adding extras to PD state
* Update USBPD.cpp
* Delay in printf
* Iterate once before delay on start
* Update usb-pd
* master usb-pd now
* Format gd libs
* Update gd32vf103_bkp.c
* Guard with PD timeout
* Remove CodeQL
* Slow for testing, fix runt pulses at start
* Fix runt pulse in read size 1
* Cleaner probing setup
* Testing delay during stop gen in read 1
* Update I2C driver
* Update gd32vf103_i2c.c
* Cleaning up i2c wrapper a little, given up on dma for rx
* Update preRTOS.cpp
* Update Setup.cpp
* Update MOVThread.cpp
* Slow down UART to work with new clock config
* Better ack setup for 2 byte read
* Cleanup POW_PD so cant be lost in #includes
* tipResistance -> TIP_RESISTANCE
* handle NOP race on len==2
* Update configuration.h
* Dont use neg timeout to mask anymore
* Not required for MHP
* Fix up source display Miniware
* Fix race on PD init
* Update POWThread.cpp
* Update formatting
* MHP format
* Update push.yml
* Faster TS80P I2C
* Bugfix for IRQ handlers
* Correctly handle I2C race on PD access
* Fix CI error (unused var) and MHP IRQ
* Test Pinecil alt ADC mode
2021-10-02 14:48:58 +10:00
discip
04ad5a3bfc
changed idle screen & missing tip ( #1097 )
2021-10-01 19:23:28 +10:00
discip
fa4b2fbe9b
changed power animation ( #1082 )
...
As requested https://github.com/Ralim/IronOS/issues/1078#issue-1007487827 .
2021-09-27 12:40:11 +10:00
