Update strings to be more uniform
closes #89 Also includes the new Italian translation closes #88
This commit is contained in:
Ben V. Brown
@@ -7,143 +7,179 @@
|
||||
#include "Strings.h"
|
||||
#define LANG_EN
|
||||
#ifdef LANG_EN
|
||||
const char* SettingsLongNames[14] =
|
||||
{
|
||||
/*These are all the help text for all the settings.*/
|
||||
/*All must start with 6 spaces so they come on screen nicely.*/
|
||||
" Power source. Sets cutoff voltage. <DC 10V> <S 3.3V per cell>",
|
||||
" Sleep Temperature <C>", " Sleep Timeout <Minutes>",
|
||||
" Shutdown Timeout <Minutes>",
|
||||
" Motion Sensitivity <0.Off 1.least sensitive 9.most sensitive>",
|
||||
" Temperature Unit", " Temperature Rounding Amount",
|
||||
" Temperature Display Update Rate",
|
||||
" Display Orientation <A. Automatic L. Left Handed R. Right Handed>",
|
||||
" Enable front key enters boost mode 450C mode when soldering",
|
||||
" Temperature when in \"boost\" mode",
|
||||
" Changes the arrows to a power display when soldering",
|
||||
" Automatically starts the iron into soldering on power up. T=Soldering, S= Sleep mode,F=Off",
|
||||
" Blink the temperature on the cooling screen while the tip is still hot." };
|
||||
|
||||
const char* TempCalStatus[3] = { "Cal Temp", "Cal OK ", "Cal Fail" }; //All fixed 8 chars
|
||||
const char* UVLOWarningString = "Low Volt"; //Fixed width 8 chars
|
||||
const char* CoolingPromptString = "Off "; //Fixed width 5 chars
|
||||
const char SettingTrueChar = 'T';
|
||||
const char SettingFalseChar = 'F';
|
||||
const char SettingSleepChar = 'S';
|
||||
const char SettingFastChar = 'F';
|
||||
const char SettingMediumChar = 'M';
|
||||
const char SettingSlowChar = 'S';
|
||||
const char SettingRightChar = 'R';
|
||||
const char SettingLeftChar = 'L';
|
||||
const char SettingAutoChar = 'A';
|
||||
const char SettingTempCChar = 'C';
|
||||
const char SettingTempFChar = 'F';
|
||||
|
||||
const char* SettingsLongNames[14] = {
|
||||
/*These are all the help text for all the settings.*/
|
||||
/*All must start with 6 spaces so they come on screen nicely.*/
|
||||
" Power source. Sets cutoff voltage. <DC=10V S=3.3V per cell>",
|
||||
" Sleep Temperature <C>",
|
||||
" Sleep Timeout <Minutes>",
|
||||
" Shutdown Timeout <Minutes>",
|
||||
" Motion Sensitivity <0=Off 1=Least sensitive 9=Most sensitive>",
|
||||
" Temperature Unit <C=Celsius F=Farnheit>",
|
||||
" Temperature Rounding Amount <Units>",
|
||||
" Temperature Display Update Rate <S=Slow M=Medium F=Fast>",
|
||||
" Display Orientation <A=Automatic L=Left Handed R=Right Handed>",
|
||||
" Enable front key enters boost mode 450C mode when soldering <T=True F=False>",
|
||||
" Temperature when in \"boost\" mode <C>",
|
||||
" Changes the arrows to a power display when soldering <T=True F=False>",
|
||||
" Automatically starts the iron into soldering on power up. <T=Soldering S=Sleep mode F=Off>",
|
||||
" Blink the temperature on the cooling screen while the tip is still hot. <T=True F=False>"
|
||||
};
|
||||
const char* TempCalStatus[3] = { "Cal Temp", "Cal OK ", "Cal Fail" }; //All fixed 8 chars
|
||||
const char* UVLOWarningString = "Low Volt"; //Fixed width 8 chars
|
||||
const char* CoolingPromptString = "Off "; //Fixed width 5 chars
|
||||
const char SettingTrueChar = 'T';
|
||||
const char SettingFalseChar = 'F';
|
||||
const char SettingSleepChar = 'S';
|
||||
const char SettingFastChar = 'F';
|
||||
const char SettingMediumChar = 'M';
|
||||
const char SettingSlowChar = 'S';
|
||||
const char SettingRightChar = 'R';
|
||||
const char SettingLeftChar = 'L';
|
||||
const char SettingAutoChar = 'A';
|
||||
const char SettingTempCChar = 'C';
|
||||
const char SettingTempFChar = 'F';
|
||||
#endif
|
||||
|
||||
#ifdef LANG_ES
|
||||
const char* SettingsLongNames[14] =
|
||||
{
|
||||
/*These are all the help text for all the settings.*/
|
||||
/*All must start with 6 spaces so they come on screen nicely.*/
|
||||
" Fuente de energía. Ajusta el límite inferior de voltaje. <DC 10V> <S 3.3V por celda>",
|
||||
" Temperatura en reposo. <C>",
|
||||
" Tiempo hasta activar reposo. <Minutos>",
|
||||
" Tiempo hasta apagado. <Minutos>",
|
||||
" Sensibilidad del movimiento. <0. Apagado, 1. El menos sensible, 9. El más sensible>",
|
||||
" Unidad de temperatura.",
|
||||
" Redondeo de la temperatura.",
|
||||
" Tasa de actualización de la temperatura.",
|
||||
" Orientación de la pantalla <A. Automático, I. Mano izquierda, D. Mano derecha>",
|
||||
" Activar el botón \"Boost\" en modo soldadura.",
|
||||
" Temperatura en modo \"Boost\".",
|
||||
" Cambiar las flechas en pantalla por indicador de potencia en modo soldadura.",
|
||||
" Iniciar modo soldadura en el encendido. <V. Sí, S. Modo reposo, F. No ",
|
||||
" Parpadea la temperatura en el enfriamiento si la punta sigue caliente."};
|
||||
|
||||
const char* TempCalStatus[3] = {"CAL TEMP", "CAL OK ", "CAL FAIL"}; //All fixed 8 chars
|
||||
const char* UVLOWarningString = "LOW VOLT";//Fixed width 8 chars
|
||||
const char* CoolingPromptString = "Cool ";//Fixed width 5 chars
|
||||
const char SettingTrueChar = 'V';
|
||||
const char SettingFalseChar = 'F';
|
||||
const char SettingSleepChar = 'S';
|
||||
const char SettingFastChar = 'R';
|
||||
const char SettingMediumChar = 'M';
|
||||
const char SettingSlowChar = 'L';
|
||||
const char SettingRightChar = 'D';
|
||||
const char SettingLeftChar = 'I';
|
||||
const char SettingAutoChar = 'A';
|
||||
const char SettingTempCChar = 'C';
|
||||
const char SettingTempFChar = 'F';
|
||||
const char* SettingsLongNames[14] = {
|
||||
/*These are all the help text for all the settings.*/
|
||||
/*All must start with 6 spaces so they come on screen nicely.*/
|
||||
" Fuente de energía. Ajusta el límite inferior de voltaje. <DC=10V S=3.3V por celda>",
|
||||
" Temperatura en reposo. <C>",
|
||||
" Tiempo hasta activar reposo. <Minutos>",
|
||||
" Tiempo hasta apagado. <Minutos>",
|
||||
" Sensibilidad del movimiento. <0=Apagado 1=El menos sensible 9=El más sensible>",
|
||||
" Unidad de temperatura.",
|
||||
" Redondeo de la temperatura.",
|
||||
" Tasa de actualización de la temperatura.",
|
||||
" Orientación de la pantalla <A=Automático I=Mano izquierda D=Mano derecha>",
|
||||
" Activar el botón \"Boost\" en modo soldadura.",
|
||||
" Temperatura en modo \"Boost\". <C>",
|
||||
" Cambiar las flechas en pantalla por indicador de potencia en modo soldadura.",
|
||||
" Iniciar modo soldadura en el encendido. <V=Sí S=Modo reposo F=No>",
|
||||
" Parpadea la temperatura en el enfriamiento si la punta sigue caliente."
|
||||
};
|
||||
const char* TempCalStatus[3] = {"CAL TEMP", "CAL OK ", "CAL FAIL"}; //All fixed 8 chars
|
||||
const char* UVLOWarningString = "LOW VOLT"; //Fixed width 8 chars
|
||||
const char* CoolingPromptString = "Cool "; //Fixed width 5 chars
|
||||
const char SettingTrueChar = 'V';
|
||||
const char SettingFalseChar = 'F';
|
||||
const char SettingSleepChar = 'S';
|
||||
const char SettingFastChar = 'R';
|
||||
const char SettingMediumChar = 'M';
|
||||
const char SettingSlowChar = 'L';
|
||||
const char SettingRightChar = 'D';
|
||||
const char SettingLeftChar = 'I';
|
||||
const char SettingAutoChar = 'A';
|
||||
const char SettingTempCChar = 'C';
|
||||
const char SettingTempFChar = 'F';
|
||||
#endif
|
||||
|
||||
#ifdef LANG_DE
|
||||
const char* SettingsLongNames[14] =
|
||||
{
|
||||
/*These are all the help text for all the settings.*/
|
||||
/*All must start with 6 spaces so they come on screen nicely.*/
|
||||
" Stromversorgung. Setzt Abschaltspannung <DC 10V> <S 3.3V pro Zelle>",
|
||||
" Ruhetemperatur <C>", " Ruhemodus nach <Minuten>",
|
||||
" Abschaltzeit <Minuten>",
|
||||
" Bewegungsempfindlichkeit <0.Aus 1.Minimal 9.Maximal>",
|
||||
" Temperatur Einheit", " Temperatur Runden",
|
||||
" Temperaturanzeige Updaterate",
|
||||
" Anzeigerichtung <A. Auto L. Linkshändig R. Rechtshändig>",
|
||||
" Fronttaste für Temperaturboost einschalten",
|
||||
" Temperatur im \"boost\"-Modus",
|
||||
" Ändert \"Temperaturpfeile\" in Leistungsbalken",
|
||||
" Automatischer Start beim Einschalten. J=Löttemp., R=Ruhemodus,N=Aus",
|
||||
" Temperatur blinkt beim Abkühlen, solange noch heiß." };
|
||||
|
||||
const char* TempCalStatus[3] = { "Cal Temp", "Cal OK ", "Cal Fehl" }; //All fixed 8 chars
|
||||
const char* UVLOWarningString = "V gering"; //Fixed width 8 chars
|
||||
const char* CoolingPromptString = "Kalt "; //Fixed width 5 chars
|
||||
const char SettingTrueChar = 'J';
|
||||
const char SettingFalseChar = 'N';
|
||||
const char SettingSleepChar = 'R';
|
||||
const char SettingFastChar = 'S';
|
||||
const char SettingMediumChar = 'M';
|
||||
const char SettingSlowChar = 'L';
|
||||
const char SettingRightChar = 'R';
|
||||
const char SettingLeftChar = 'L';
|
||||
const char SettingAutoChar = 'A';
|
||||
const char SettingTempCChar = 'C';
|
||||
const char SettingTempFChar = 'F';
|
||||
|
||||
const char* SettingsLongNames[14] = {
|
||||
/*These are all the help text for all the settings.*/
|
||||
/*All must start with 6 spaces so they come on screen nicely.*/
|
||||
" Stromversorgung. Setzt Abschaltspannung <DC=10V S=3.3V pro Zelle>",
|
||||
" Ruhetemperatur <C>",
|
||||
" Ruhemodus nach <Minuten>",
|
||||
" Abschaltzeit <Minuten>",
|
||||
" Bewegungsempfindlichkeit <0=Aus 1=Minimal 9=Maximal>",
|
||||
" Temperatur Einheit",
|
||||
" Temperatur Runden",
|
||||
" Temperaturanzeige Updaterate",
|
||||
" Anzeigerichtung <A=Auto L=Linkshändig R=Rechtshändig>",
|
||||
" Fronttaste für Temperaturboost einschalten",
|
||||
" Temperatur im \"boost\"-Modus <C>",
|
||||
" Ändert \"Temperaturpfeile\" in Leistungsbalken",
|
||||
" Automatischer Start beim Einschalten. <J=Löttemp R=Ruhemodus N=Aus>",
|
||||
" Temperatur blinkt beim Abkühlen, solange noch heiß."
|
||||
};
|
||||
const char* TempCalStatus[3] = { "Cal Temp", "Cal OK ", "Cal Fehl" }; //All fixed 8 chars
|
||||
const char* UVLOWarningString = "V gering"; //Fixed width 8 chars
|
||||
const char* CoolingPromptString = "Kalt "; //Fixed width 5 chars
|
||||
const char SettingTrueChar = 'J';
|
||||
const char SettingFalseChar = 'N';
|
||||
const char SettingSleepChar = 'R';
|
||||
const char SettingFastChar = 'S';
|
||||
const char SettingMediumChar = 'M';
|
||||
const char SettingSlowChar = 'L';
|
||||
const char SettingRightChar = 'R';
|
||||
const char SettingLeftChar = 'L';
|
||||
const char SettingAutoChar = 'A';
|
||||
const char SettingTempCChar = 'C';
|
||||
const char SettingTempFChar = 'F';
|
||||
#endif
|
||||
|
||||
#ifdef LANG_FR
|
||||
const char* SettingsLongNames[14] =
|
||||
{
|
||||
/*These are all the help text for all the settings.*/
|
||||
/*All must start with 6 spaces so they come on screen nicely.*/
|
||||
" Type d\'alimentation. Regle la tension de coupure. <DC 10V> <S 3.3V par cellules>",
|
||||
" Temperature en veille. <C>",
|
||||
" Temps avant mise en veille. <Minutes>",
|
||||
" Temps avant extinction. <Minutes>",
|
||||
" Sensibilitee du capteur de mouvement. <0.Inactif 1.peu sensible 9.tres sensible>",
|
||||
" Unitee de temperature.",
|
||||
" Arrondissement de la temperature.",
|
||||
" Taux de raffraichissement de la temperature.",
|
||||
" Orientation de l\'affichage. <A. Automatique G. Gaucher D. Droitier>",
|
||||
" Active le mode \"Boost\" 450C sur le bouton de devant pendant la soudure.",
|
||||
" Temperature du mode \"Boost\".",
|
||||
" Change les fleches en affichage de la tension pendant la soudure.",
|
||||
" Demarre automatiquement la soudure a l\'allumage. <A=Active, V= Mode Veille, D=Desactive>",
|
||||
" Fait clignotter la temperature pendant la phase de refroidissement quand la panne est chaude." };
|
||||
const char* SettingsLongNames[14] = {
|
||||
/*These are all the help text for all the settings.*/
|
||||
/*All must start with 6 spaces so they come on screen nicely.*/
|
||||
" Type d\'alimentation. Regle la tension de coupure. <DC=10V S=3.3V par cellules>",
|
||||
" Temperature en veille. <C>",
|
||||
" Temps avant mise en veille. <Minutes>",
|
||||
" Temps avant extinction. <Minutes>",
|
||||
" Sensibilitee du capteur de mouvement. <0=Inactif 1=Peu sensible 9=Tres sensible>",
|
||||
" Unitee de temperature.",
|
||||
" Arrondissement de la temperature.",
|
||||
" Taux de raffraichissement de la temperature.",
|
||||
" Orientation de l\'affichage. <A=Automatique G=Gaucher D=Droitier>",
|
||||
" Active le mode \"Boost\" 450C sur le bouton de devant pendant la soudure.",
|
||||
" Temperature du mode \"Boost\". <C>",
|
||||
" Change les fleches en affichage de la tension pendant la soudure.",
|
||||
" Demarre automatiquement la soudure a l\'allumage. <A=Active, V=Mode Veille, D=Desactive>",
|
||||
" Fait clignotter la temperature pendant la phase de refroidissement quand la panne est chaude."
|
||||
};
|
||||
const char* TempCalStatus[3] = { "Cal Temp", "Cal OK ", "Cal Err " }; //All fixed 8 chars
|
||||
const char* UVLOWarningString = "Batt Bas"; //Fixed width 8 chars
|
||||
const char* CoolingPromptString = "Etein"; //Fixed width 5 chars
|
||||
const char SettingTrueChar = 'A';
|
||||
const char SettingFalseChar = 'D';
|
||||
const char SettingSleepChar = 'V';
|
||||
const char SettingFastChar = 'R';
|
||||
const char SettingMediumChar = 'M';
|
||||
const char SettingSlowChar = 'L';
|
||||
const char SettingRightChar = 'D';
|
||||
const char SettingLeftChar = 'G';
|
||||
const char SettingAutoChar = 'A';
|
||||
const char SettingTempCChar = 'C';
|
||||
const char SettingTempFChar = 'F';
|
||||
#endif
|
||||
|
||||
const char* TempCalStatus[3] = { "Cal Temp", "Cal OK ", "Cal Err " }; //All fixed 8 chars
|
||||
const char* UVLOWarningString = "Batt Bas"; //Fixed width 8 chars
|
||||
const char* CoolingPromptString = "Etein"; //Fixed width 5 chars
|
||||
const char SettingTrueChar = 'A';
|
||||
const char SettingFalseChar = 'D';
|
||||
const char SettingSleepChar = 'V';
|
||||
const char SettingFastChar = 'R';
|
||||
const char SettingMediumChar = 'M';
|
||||
const char SettingSlowChar = 'L';
|
||||
const char SettingRightChar = 'D';
|
||||
const char SettingLeftChar = 'G';
|
||||
const char SettingAutoChar = 'A';
|
||||
const char SettingTempCChar = 'C';
|
||||
const char SettingTempFChar = 'F';
|
||||
#ifdef LANG_IT
|
||||
const char* SettingsLongNames[14] = {
|
||||
/*These are all the help text for all the settings.*/
|
||||
/*All must start with 6 spaces so they come on screen nicely.*/
|
||||
" Sorgente di alimentazione. Imposta il limite inferiore di tensione. <DC=10V S=3.3V per cella>",
|
||||
" Temperatura modalità riposo <C>",
|
||||
" Timeout per passaggio a modalità riposo <Minuti>",
|
||||
" Timeout spegnimento <Minuti>",
|
||||
" Sensibilità al movimento <0=Spento 1=Sensibilità minima 9=Sensibilità massima>",
|
||||
" Unità di temperatura",
|
||||
" Arrotondamento temperatura",
|
||||
" Velocità di aggiornamento temperatura",
|
||||
" Orientamento del display <A=Automatico S=Sinistrorso D=Destrorso>",
|
||||
" Il tasto anteriore abilita modalità \"boost\" fino a 450C durante la saldatura",
|
||||
" Temperatura in modalità \"boost\" <C>",
|
||||
" Visualizza il grafico della potenza assorbita al posto delle frecce",
|
||||
" Avvia automaticamente il saldatore quando viene alimentato. <S=Modalità saldatura R=Modalità riposo N=Spento>",
|
||||
" Durante lo spegnimento la temperatura lampeggia sul display finché la punta è calda."
|
||||
};
|
||||
|
||||
const char* TempCalStatus[3] = { "Cal Temp", "Cal OK ", "Cal Err " }; //All fixed 8 chars
|
||||
const char* UVLOWarningString = "LOW VOLT"; //Fixed width 8 chars
|
||||
const char* CoolingPromptString = "Cool"; //Fixed width 5 chars
|
||||
const char SettingTrueChar = 'S';
|
||||
const char SettingFalseChar = 'N';
|
||||
const char SettingSleepChar = 'R';
|
||||
const char SettingFastChar = 'V';
|
||||
const char SettingMediumChar = 'M';
|
||||
const char SettingSlowChar = 'L';
|
||||
const char SettingRightChar = 'D';
|
||||
const char SettingLeftChar = 'S';
|
||||
const char SettingAutoChar = 'A';
|
||||
const char SettingTempCChar = 'C';
|
||||
const char SettingTempFChar = 'F';
|
||||
#endif
|
||||
const char* SettingsShortNames[14] = { "PWRSC ", "STMP ", "STME ", "SHTME ",
|
||||
"MSENSE ", "TMPUNT ", "TMPRND ", "TMPSPD ", "DSPROT ", "BOOST ",
|
||||
|
||||
Reference in New Issue
Block a user