Fix #231

Should fix #248

.gitignore

@@ -43,3 +43,4 @@ Logo GUI/TS100 Logo Editor/TS100 Logo Editor/bin/
 workspace/ts100/ts100.xml
 workspace/ts100_old/*
 *.cache
+workspace/TS100/.settings/language.settings.xml

Bootup Logo/Logo GUI/TS100 Logo Editor/TS100 Logo Editor/Form1.cs

@@ -148,7 +148,7 @@ namespace TS100_Logo_Editor
                 data[i] = data[i + 1];
                 data[i + 1] = temp;
             }
-            string outputHexFile = IntelHex.IntelHex.encode(data, 0x0800F800, 16, true, true);//16 bytes is the only format the DFU seems to support //0x0800B800
+            string outputHexFile = IntelHex.IntelHex.encode(data, 0x0800F800, 16, true, true);//16 bytes is the only format the DFU seems to support //0x0800F800
             //^ This string now just needs to be written out to a text file :)
             SaveFileDialog dlg = new SaveFileDialog();
             dlg.Title = "Save DFU File";

Bootup Logo/Logos/001_TS100.hex

@@ -0,0 +1,258 @@
+:020000040800F2
+:10F8000055AA0DF080002A54821580818080808066
+:10F8100080808080808080808080808000000000E8
+:10F82000000000004080402020C020201010080868
+:10F8300008080C080C0C0C0C080808080C0C0C0C24
+:10F84000E80CA8A8A828E8A8C808A828A8A848A834
+:10F850008808284808E828C828A80CCC28CC28A85C
+:10F8600008C800F80200050208050808080808088A
+:10F8700008080A080A090A090A0908090505050508
+:10F880000505050510081020201F4040404020407D
+:10F890002020202020202020202020202020202068
+:10F8A00020202F202F28202025202A2A2A2A2728F6
+:10F8B0002120282F202F2827282B20272827282BD6
+:10F8C0002027001F000000000000000000000000D2
+:10F8D0000000000000000000000000000000000028
+:10F8E0000000000000000000000000000000000018
+:10F8F0000000000000000000000000000000000008
+:10F9000000000000000000000000000000000000F7
+:10F9100000000000000000000000000000000000E7
+:10F9200000000000000000000000000000000000D7
+:10F9300000000000000000000000000000000000C7
+:10F9400000000000000000000000000000000000B7
+:10F9500000000000000000000000000000000000A7
+:10F960000000000000000000000000000000000097
+:10F970000000000000000000000000000000000087
+:10F980000000000000000000000000000000000077
+:10F990000000000000000000000000000000000067
+:10F9A0000000000000000000000000000000000057
+:10F9B0000000000000000000000000000000000047
+:10F9C0000000000000000000000000000000000037
+:10F9D0000000000000000000000000000000000027
+:10F9E0000000000000000000000000000000000017
+:10F9F0000000000000000000000000000000000007
+:10FA000000000000000000000000000000000000F6
+:10FA100000000000000000000000000000000000E6
+:10FA200000000000000000000000000000000000D6
+:10FA300000000000000000000000000000000000C6
+:10FA400000000000000000000000000000000000B6
+:10FA500000000000000000000000000000000000A6
+:10FA60000000000000000000000000000000000096
+:10FA70000000000000000000000000000000000086
+:10FA80000000000000000000000000000000000076
+:10FA90000000000000000000000000000000000066
+:10FAA0000000000000000000000000000000000056
+:10FAB0000000000000000000000000000000000046
+:10FAC0000000000000000000000000000000000036
+:10FAD0000000000000000000000000000000000026
+:10FAE0000000000000000000000000000000000016
+:10FAF0000000000000000000000000000000000006
+:10FB000000000000000000000000000000000000F5
+:10FB100000000000000000000000000000000000E5
+:10FB200000000000000000000000000000000000D5
+:10FB300000000000000000000000000000000000C5
+:10FB400000000000000000000000000000000000B5
+:10FB500000000000000000000000000000000000A5
+:10FB60000000000000000000000000000000000095
+:10FB70000000000000000000000000000000000085
+:10FB80000000000000000000000000000000000075
+:10FB90000000000000000000000000000000000065
+:10FBA0000000000000000000000000000000000055
+:10FBB0000000000000000000000000000000000045
+:10FBC0000000000000000000000000000000000035
+:10FBD0000000000000000000000000000000000025
+:10FBE0000000000000000000000000000000000015
+:10FBF0000000000000000000000000000000000005
+:10F8000055AA0DF080002A54821580818080808066
+:10F8100080808080808080808080808000000000E8
+:10F82000000000004080402020C020201010080868
+:10F8300008080C080C0C0C0C080808080C0C0C0C24
+:10F84000E80CA8A8A828E8A8C808A828A8A848A834
+:10F850008808284808E828C828A80CCC28CC28A85C
+:10F8600008C800F80200050208050808080808088A
+:10F8700008080A080A090A090A0908090505050508
+:10F880000505050510081020201F4040404020407D
+:10F890002020202020202020202020202020202068
+:10F8A00020202F202F28202025202A2A2A2A2728F6
+:10F8B0002120282F202F2827282B20272827282BD6
+:10F8C0002027001F000000000000000000000000D2
+:10F8D0000000000000000000000000000000000028
+:10F8E0000000000000000000000000000000000018
+:10F8F0000000000000000000000000000000000008
+:10F9000000000000000000000000000000000000F7
+:10F9100000000000000000000000000000000000E7
+:10F9200000000000000000000000000000000000D7
+:10F9300000000000000000000000000000000000C7
+:10F9400000000000000000000000000000000000B7
+:10F9500000000000000000000000000000000000A7
+:10F960000000000000000000000000000000000097
+:10F970000000000000000000000000000000000087
+:10F980000000000000000000000000000000000077
+:10F990000000000000000000000000000000000067
+:10F9A0000000000000000000000000000000000057
+:10F9B0000000000000000000000000000000000047
+:10F9C0000000000000000000000000000000000037
+:10F9D0000000000000000000000000000000000027
+:10F9E0000000000000000000000000000000000017
+:10F9F0000000000000000000000000000000000007
+:10FA000000000000000000000000000000000000F6
+:10FA100000000000000000000000000000000000E6
+:10FA200000000000000000000000000000000000D6
+:10FA300000000000000000000000000000000000C6
+:10FA400000000000000000000000000000000000B6
+:10FA500000000000000000000000000000000000A6
+:10FA60000000000000000000000000000000000096
+:10FA70000000000000000000000000000000000086
+:10FA80000000000000000000000000000000000076
+:10FA90000000000000000000000000000000000066
+:10FAA0000000000000000000000000000000000056
+:10FAB0000000000000000000000000000000000046
+:10FAC0000000000000000000000000000000000036
+:10FAD0000000000000000000000000000000000026
+:10FAE0000000000000000000000000000000000016
+:10FAF0000000000000000000000000000000000006
+:10FB000000000000000000000000000000000000F5
+:10FB100000000000000000000000000000000000E5
+:10FB200000000000000000000000000000000000D5
+:10FB300000000000000000000000000000000000C5
+:10FB400000000000000000000000000000000000B5
+:10FB500000000000000000000000000000000000A5
+:10FB60000000000000000000000000000000000095
+:10FB70000000000000000000000000000000000085
+:10FB80000000000000000000000000000000000075
+:10FB90000000000000000000000000000000000065
+:10FBA0000000000000000000000000000000000055
+:10FBB0000000000000000000000000000000000045
+:10FBC0000000000000000000000000000000000035
+:10FBD0000000000000000000000000000000000025
+:10FBE0000000000000000000000000000000000015
+:10FBF0000000000000000000000000000000000005
+:10F8000055AA0DF080002A54821580818080808066
+:10F8100080808080808080808080808000000000E8
+:10F82000000000004080402020C020201010080868
+:10F8300008080C080C0C0C0C080808080C0C0C0C24
+:10F84000E80CA8A8A828E8A8C808A828A8A848A834
+:10F850008808284808E828C828A80CCC28CC28A85C
+:10F8600008C800F80200050208050808080808088A
+:10F8700008080A080A090A090A0908090505050508
+:10F880000505050510081020201F4040404020407D
+:10F890002020202020202020202020202020202068
+:10F8A00020202F202F28202025202A2A2A2A2728F6
+:10F8B0002120282F202F2827282B20272827282BD6
+:10F8C0002027001F000000000000000000000000D2
+:10F8D0000000000000000000000000000000000028
+:10F8E0000000000000000000000000000000000018
+:10F8F0000000000000000000000000000000000008
+:10F9000000000000000000000000000000000000F7
+:10F9100000000000000000000000000000000000E7
+:10F9200000000000000000000000000000000000D7
+:10F9300000000000000000000000000000000000C7
+:10F9400000000000000000000000000000000000B7
+:10F9500000000000000000000000000000000000A7
+:10F960000000000000000000000000000000000097
+:10F970000000000000000000000000000000000087
+:10F980000000000000000000000000000000000077
+:10F990000000000000000000000000000000000067
+:10F9A0000000000000000000000000000000000057
+:10F9B0000000000000000000000000000000000047
+:10F9C0000000000000000000000000000000000037
+:10F9D0000000000000000000000000000000000027
+:10F9E0000000000000000000000000000000000017
+:10F9F0000000000000000000000000000000000007
+:10FA000000000000000000000000000000000000F6
+:10FA100000000000000000000000000000000000E6
+:10FA200000000000000000000000000000000000D6
+:10FA300000000000000000000000000000000000C6
+:10FA400000000000000000000000000000000000B6
+:10FA500000000000000000000000000000000000A6
+:10FA60000000000000000000000000000000000096
+:10FA70000000000000000000000000000000000086
+:10FA80000000000000000000000000000000000076
+:10FA90000000000000000000000000000000000066
+:10FAA0000000000000000000000000000000000056
+:10FAB0000000000000000000000000000000000046
+:10FAC0000000000000000000000000000000000036
+:10FAD0000000000000000000000000000000000026
+:10FAE0000000000000000000000000000000000016
+:10FAF0000000000000000000000000000000000006
+:10FB000000000000000000000000000000000000F5
+:10FB100000000000000000000000000000000000E5
+:10FB200000000000000000000000000000000000D5
+:10FB300000000000000000000000000000000000C5
+:10FB400000000000000000000000000000000000B5
+:10FB500000000000000000000000000000000000A5
+:10FB60000000000000000000000000000000000095
+:10FB70000000000000000000000000000000000085
+:10FB80000000000000000000000000000000000075
+:10FB90000000000000000000000000000000000065
+:10FBA0000000000000000000000000000000000055
+:10FBB0000000000000000000000000000000000045
+:10FBC0000000000000000000000000000000000035
+:10FBD0000000000000000000000000000000000025
+:10FBE0000000000000000000000000000000000015
+:10FBF0000000000000000000000000000000000005
+:10F8000055AA0DF080002A54821580818080808066
+:10F8100080808080808080808080808000000000E8
+:10F82000000000004080402020C020201010080868
+:10F8300008080C080C0C0C0C080808080C0C0C0C24
+:10F84000E80CA8A8A828E8A8C808A828A8A848A834
+:10F850008808284808E828C828A80CCC28CC28A85C
+:10F8600008C800F80200050208050808080808088A
+:10F8700008080A080A090A090A0908090505050508
+:10F880000505050510081020201F4040404020407D
+:10F890002020202020202020202020202020202068
+:10F8A00020202F202F28202025202A2A2A2A2728F6
+:10F8B0002120282F202F2827282B20272827282BD6
+:10F8C0002027001F000000000000000000000000D2
+:10F8D0000000000000000000000000000000000028
+:10F8E0000000000000000000000000000000000018
+:10F8F0000000000000000000000000000000000008
+:10F9000000000000000000000000000000000000F7
+:10F9100000000000000000000000000000000000E7
+:10F9200000000000000000000000000000000000D7
+:10F9300000000000000000000000000000000000C7
+:10F9400000000000000000000000000000000000B7
+:10F9500000000000000000000000000000000000A7
+:10F960000000000000000000000000000000000097
+:10F970000000000000000000000000000000000087
+:10F980000000000000000000000000000000000077
+:10F990000000000000000000000000000000000067
+:10F9A0000000000000000000000000000000000057
+:10F9B0000000000000000000000000000000000047
+:10F9C0000000000000000000000000000000000037
+:10F9D0000000000000000000000000000000000027
+:10F9E0000000000000000000000000000000000017
+:10F9F0000000000000000000000000000000000007
+:10FA000000000000000000000000000000000000F6
+:10FA100000000000000000000000000000000000E6
+:10FA200000000000000000000000000000000000D6
+:10FA300000000000000000000000000000000000C6
+:10FA400000000000000000000000000000000000B6
+:10FA500000000000000000000000000000000000A6
+:10FA60000000000000000000000000000000000096
+:10FA70000000000000000000000000000000000086
+:10FA80000000000000000000000000000000000076
+:10FA90000000000000000000000000000000000066
+:10FAA0000000000000000000000000000000000056
+:10FAB0000000000000000000000000000000000046
+:10FAC0000000000000000000000000000000000036
+:10FAD0000000000000000000000000000000000026
+:10FAE0000000000000000000000000000000000016
+:10FAF0000000000000000000000000000000000006
+:10FB000000000000000000000000000000000000F5
+:10FB100000000000000000000000000000000000E5
+:10FB200000000000000000000000000000000000D5
+:10FB300000000000000000000000000000000000C5
+:10FB400000000000000000000000000000000000B5
+:10FB500000000000000000000000000000000000A5
+:10FB60000000000000000000000000000000000095
+:10FB70000000000000000000000000000000000085
+:10FB80000000000000000000000000000000000075
+:10FB90000000000000000000000000000000000065
+:10FBA0000000000000000000000000000000000055
+:10FBB0000000000000000000000000000000000045
+:10FBC0000000000000000000000000000000000035
+:10FBD0000000000000000000000000000000000025
+:10FBE0000000000000000000000000000000000015
+:10FBF0000000000000000000000000000000000005
+:00000001FF

Bootup Logo/Logos/_clear_logo.hex

@@ -0,0 +1,258 @@
+:020000040800F2
+:10F8000000000000000000000000000000000000F8
+:10F8100000000000000000000000000000000000E8
+:10F8200000000000000000000000000000000000D8
+:10F8300000000000000000000000000000000000C8
+:10F8400000000000000000000000000000000000B8
+:10F8500000000000000000000000000000000000A8
+:10F860000000000000000000000000000000000098
+:10F870000000000000000000000000000000000088
+:10F880000000000000000000000000000000000078
+:10F890000000000000000000000000000000000068
+:10F8A0000000000000000000000000000000000058
+:10F8B0000000000000000000000000000000000048
+:10F8C0000000000000000000000000000000000038
+:10F8D0000000000000000000000000000000000028
+:10F8E0000000000000000000000000000000000018
+:10F8F0000000000000000000000000000000000008
+:10F9000000000000000000000000000000000000F7
+:10F9100000000000000000000000000000000000E7
+:10F9200000000000000000000000000000000000D7
+:10F9300000000000000000000000000000000000C7
+:10F9400000000000000000000000000000000000B7
+:10F9500000000000000000000000000000000000A7
+:10F960000000000000000000000000000000000097
+:10F970000000000000000000000000000000000087
+:10F980000000000000000000000000000000000077
+:10F990000000000000000000000000000000000067
+:10F9A0000000000000000000000000000000000057
+:10F9B0000000000000000000000000000000000047
+:10F9C0000000000000000000000000000000000037
+:10F9D0000000000000000000000000000000000027
+:10F9E0000000000000000000000000000000000017
+:10F9F0000000000000000000000000000000000007
+:10FA000000000000000000000000000000000000F6
+:10FA100000000000000000000000000000000000E6
+:10FA200000000000000000000000000000000000D6
+:10FA300000000000000000000000000000000000C6
+:10FA400000000000000000000000000000000000B6
+:10FA500000000000000000000000000000000000A6
+:10FA60000000000000000000000000000000000096
+:10FA70000000000000000000000000000000000086
+:10FA80000000000000000000000000000000000076
+:10FA90000000000000000000000000000000000066
+:10FAA0000000000000000000000000000000000056
+:10FAB0000000000000000000000000000000000046
+:10FAC0000000000000000000000000000000000036
+:10FAD0000000000000000000000000000000000026
+:10FAE0000000000000000000000000000000000016
+:10FAF0000000000000000000000000000000000006
+:10FB000000000000000000000000000000000000F5
+:10FB100000000000000000000000000000000000E5
+:10FB200000000000000000000000000000000000D5
+:10FB300000000000000000000000000000000000C5
+:10FB400000000000000000000000000000000000B5
+:10FB500000000000000000000000000000000000A5
+:10FB60000000000000000000000000000000000095
+:10FB70000000000000000000000000000000000085
+:10FB80000000000000000000000000000000000075
+:10FB90000000000000000000000000000000000065
+:10FBA0000000000000000000000000000000000055
+:10FBB0000000000000000000000000000000000045
+:10FBC0000000000000000000000000000000000035
+:10FBD0000000000000000000000000000000000025
+:10FBE0000000000000000000000000000000000015
+:10FBF0000000000000000000000000000000000005
+:10F8000000000000000000000000000000000000F8
+:10F8100000000000000000000000000000000000E8
+:10F8200000000000000000000000000000000000D8
+:10F8300000000000000000000000000000000000C8
+:10F8400000000000000000000000000000000000B8
+:10F8500000000000000000000000000000000000A8
+:10F860000000000000000000000000000000000098
+:10F870000000000000000000000000000000000088
+:10F880000000000000000000000000000000000078
+:10F890000000000000000000000000000000000068
+:10F8A0000000000000000000000000000000000058
+:10F8B0000000000000000000000000000000000048
+:10F8C0000000000000000000000000000000000038
+:10F8D0000000000000000000000000000000000028
+:10F8E0000000000000000000000000000000000018
+:10F8F0000000000000000000000000000000000008
+:10F9000000000000000000000000000000000000F7
+:10F9100000000000000000000000000000000000E7
+:10F9200000000000000000000000000000000000D7
+:10F9300000000000000000000000000000000000C7
+:10F9400000000000000000000000000000000000B7
+:10F9500000000000000000000000000000000000A7
+:10F960000000000000000000000000000000000097
+:10F970000000000000000000000000000000000087
+:10F980000000000000000000000000000000000077
+:10F990000000000000000000000000000000000067
+:10F9A0000000000000000000000000000000000057
+:10F9B0000000000000000000000000000000000047
+:10F9C0000000000000000000000000000000000037
+:10F9D0000000000000000000000000000000000027
+:10F9E0000000000000000000000000000000000017
+:10F9F0000000000000000000000000000000000007
+:10FA000000000000000000000000000000000000F6
+:10FA100000000000000000000000000000000000E6
+:10FA200000000000000000000000000000000000D6
+:10FA300000000000000000000000000000000000C6
+:10FA400000000000000000000000000000000000B6
+:10FA500000000000000000000000000000000000A6
+:10FA60000000000000000000000000000000000096
+:10FA70000000000000000000000000000000000086
+:10FA80000000000000000000000000000000000076
+:10FA90000000000000000000000000000000000066
+:10FAA0000000000000000000000000000000000056
+:10FAB0000000000000000000000000000000000046
+:10FAC0000000000000000000000000000000000036
+:10FAD0000000000000000000000000000000000026
+:10FAE0000000000000000000000000000000000016
+:10FAF0000000000000000000000000000000000006
+:10FB000000000000000000000000000000000000F5
+:10FB100000000000000000000000000000000000E5
+:10FB200000000000000000000000000000000000D5
+:10FB300000000000000000000000000000000000C5
+:10FB400000000000000000000000000000000000B5
+:10FB500000000000000000000000000000000000A5
+:10FB60000000000000000000000000000000000095
+:10FB70000000000000000000000000000000000085
+:10FB80000000000000000000000000000000000075
+:10FB90000000000000000000000000000000000065
+:10FBA0000000000000000000000000000000000055
+:10FBB0000000000000000000000000000000000045
+:10FBC0000000000000000000000000000000000035
+:10FBD0000000000000000000000000000000000025
+:10FBE0000000000000000000000000000000000015
+:10FBF0000000000000000000000000000000000005
+:10F8000000000000000000000000000000000000F8
+:10F8100000000000000000000000000000000000E8
+:10F8200000000000000000000000000000000000D8
+:10F8300000000000000000000000000000000000C8
+:10F8400000000000000000000000000000000000B8
+:10F8500000000000000000000000000000000000A8
+:10F860000000000000000000000000000000000098
+:10F870000000000000000000000000000000000088
+:10F880000000000000000000000000000000000078
+:10F890000000000000000000000000000000000068
+:10F8A0000000000000000000000000000000000058
+:10F8B0000000000000000000000000000000000048
+:10F8C0000000000000000000000000000000000038
+:10F8D0000000000000000000000000000000000028
+:10F8E0000000000000000000000000000000000018
+:10F8F0000000000000000000000000000000000008
+:10F9000000000000000000000000000000000000F7
+:10F9100000000000000000000000000000000000E7
+:10F9200000000000000000000000000000000000D7
+:10F9300000000000000000000000000000000000C7
+:10F9400000000000000000000000000000000000B7
+:10F9500000000000000000000000000000000000A7
+:10F960000000000000000000000000000000000097
+:10F970000000000000000000000000000000000087
+:10F980000000000000000000000000000000000077
+:10F990000000000000000000000000000000000067
+:10F9A0000000000000000000000000000000000057
+:10F9B0000000000000000000000000000000000047
+:10F9C0000000000000000000000000000000000037
+:10F9D0000000000000000000000000000000000027
+:10F9E0000000000000000000000000000000000017
+:10F9F0000000000000000000000000000000000007
+:10FA000000000000000000000000000000000000F6
+:10FA100000000000000000000000000000000000E6
+:10FA200000000000000000000000000000000000D6
+:10FA300000000000000000000000000000000000C6
+:10FA400000000000000000000000000000000000B6
+:10FA500000000000000000000000000000000000A6
+:10FA60000000000000000000000000000000000096
+:10FA70000000000000000000000000000000000086
+:10FA80000000000000000000000000000000000076
+:10FA90000000000000000000000000000000000066
+:10FAA0000000000000000000000000000000000056
+:10FAB0000000000000000000000000000000000046
+:10FAC0000000000000000000000000000000000036
+:10FAD0000000000000000000000000000000000026
+:10FAE0000000000000000000000000000000000016
+:10FAF0000000000000000000000000000000000006
+:10FB000000000000000000000000000000000000F5
+:10FB100000000000000000000000000000000000E5
+:10FB200000000000000000000000000000000000D5
+:10FB300000000000000000000000000000000000C5
+:10FB400000000000000000000000000000000000B5
+:10FB500000000000000000000000000000000000A5
+:10FB60000000000000000000000000000000000095
+:10FB70000000000000000000000000000000000085
+:10FB80000000000000000000000000000000000075
+:10FB90000000000000000000000000000000000065
+:10FBA0000000000000000000000000000000000055
+:10FBB0000000000000000000000000000000000045
+:10FBC0000000000000000000000000000000000035
+:10FBD0000000000000000000000000000000000025
+:10FBE0000000000000000000000000000000000015
+:10FBF0000000000000000000000000000000000005
+:10F8000000000000000000000000000000000000F8
+:10F8100000000000000000000000000000000000E8
+:10F8200000000000000000000000000000000000D8
+:10F8300000000000000000000000000000000000C8
+:10F8400000000000000000000000000000000000B8
+:10F8500000000000000000000000000000000000A8
+:10F860000000000000000000000000000000000098
+:10F870000000000000000000000000000000000088
+:10F880000000000000000000000000000000000078
+:10F890000000000000000000000000000000000068
+:10F8A0000000000000000000000000000000000058
+:10F8B0000000000000000000000000000000000048
+:10F8C0000000000000000000000000000000000038
+:10F8D0000000000000000000000000000000000028
+:10F8E0000000000000000000000000000000000018
+:10F8F0000000000000000000000000000000000008
+:10F9000000000000000000000000000000000000F7
+:10F9100000000000000000000000000000000000E7
+:10F9200000000000000000000000000000000000D7
+:10F9300000000000000000000000000000000000C7
+:10F9400000000000000000000000000000000000B7
+:10F9500000000000000000000000000000000000A7
+:10F960000000000000000000000000000000000097
+:10F970000000000000000000000000000000000087
+:10F980000000000000000000000000000000000077
+:10F990000000000000000000000000000000000067
+:10F9A0000000000000000000000000000000000057
+:10F9B0000000000000000000000000000000000047
+:10F9C0000000000000000000000000000000000037
+:10F9D0000000000000000000000000000000000027
+:10F9E0000000000000000000000000000000000017
+:10F9F0000000000000000000000000000000000007
+:10FA000000000000000000000000000000000000F6
+:10FA100000000000000000000000000000000000E6
+:10FA200000000000000000000000000000000000D6
+:10FA300000000000000000000000000000000000C6
+:10FA400000000000000000000000000000000000B6
+:10FA500000000000000000000000000000000000A6
+:10FA60000000000000000000000000000000000096
+:10FA70000000000000000000000000000000000086
+:10FA80000000000000000000000000000000000076
+:10FA90000000000000000000000000000000000066
+:10FAA0000000000000000000000000000000000056
+:10FAB0000000000000000000000000000000000046
+:10FAC0000000000000000000000000000000000036
+:10FAD0000000000000000000000000000000000026
+:10FAE0000000000000000000000000000000000016
+:10FAF0000000000000000000000000000000000006
+:10FB000000000000000000000000000000000000F5
+:10FB100000000000000000000000000000000000E5
+:10FB200000000000000000000000000000000000D5
+:10FB300000000000000000000000000000000000C5
+:10FB400000000000000000000000000000000000B5
+:10FB500000000000000000000000000000000000A5
+:10FB60000000000000000000000000000000000095
+:10FB70000000000000000000000000000000000085
+:10FB80000000000000000000000000000000000075
+:10FB90000000000000000000000000000000000065
+:10FBA0000000000000000000000000000000000055
+:10FBB0000000000000000000000000000000000045
+:10FBC0000000000000000000000000000000000035
+:10FBD0000000000000000000000000000000000025
+:10FBE0000000000000000000000000000000000015
+:10FBF0000000000000000000000000000000000005
+:00000001FF

ISSUE_TEMPLATE.md

@@ -0,0 +1,46 @@
+Please edit this template and fill out all the information you can (where relevant). Failure to provide essential information can delay the response you receive.
+
+
+* **I'm submitting a ...**
+  - [ ] Bug report
+  - [ ] Feature request
+  - [ ] Translation
+
+
+* **Do you want to request a *feature* or report a *bug*?**
+
+
+
+* **What is the current behavior?**
+
+
+* **What is the expected behavior?**
+
+
+* **If the current behavior is a bug, please provide the steps to reproduce and if possible a minimal demo of the problem**
+
+***Steps to reproduce:***
+
+1. 
+2. 
+3. 
+
+***Video of problem if hard to reproduce***
+
+* **What is the motivation / use case for changing the behavior?**
+
+
+
+* **What are you running:**
+
+On the idle screen, you can hold the settings button and it will show you the firmware version.
+
+  - Firmware Version: 2.x
+  - PCB Version: (1/2)
+  - Power Supply (Voltage and Current Rating) :
+
+
+* **Other information** 
+
+If submitting graphics to go on the iron, please use BMP or PNG files over JPG.
+

PULL_REQUEST_TEMPLATE.md

@@ -0,0 +1,29 @@
+
+Please try and fill out this template where possible, not all fields are required and can be removed.
+
+* **Please check if the PR fulfills these requirements**
+- [ ] The commit message make sense
+- [ ] The changes have been tested locally
+- [ ] New features have been documented in the Wiki
+- [ ] I'm willing to maintain this in the future (Totally Optional)
+
+
+* **What kind of change does this PR introduce?** 
+(Bug fix, feature, docs update, ...)
+
+
+
+* **What is the current behavior?** 
+(You can also link to an open issue here)
+
+
+
+* **What is the new behavior (if this is a feature change)?**
+
+
+
+* **Does this PR introduce a breaking change?** 
+(What changes might users need to make in their application due to this PR?)
+
+
+* **Other information**:

workspace/TS100/.cproject

@@ -130,7 +130,7 @@
 							<builder buildPath="${workspace_loc:/TS100}/Release" id="fr.ac6.managedbuild.builder.gnu.cross.548236022" keepEnvironmentInBuildfile="false" managedBuildOn="true" name="Gnu Make Builder" superClass="fr.ac6.managedbuild.builder.gnu.cross"/>
 							<tool id="fr.ac6.managedbuild.tool.gnu.cross.c.compiler.1363306495" name="MCU GCC Compiler" superClass="fr.ac6.managedbuild.tool.gnu.cross.c.compiler">
 								<option id="fr.ac6.managedbuild.gnu.c.compiler.option.optimization.level.1100266163" name="Optimization Level" superClass="fr.ac6.managedbuild.gnu.c.compiler.option.optimization.level" useByScannerDiscovery="false" value="fr.ac6.managedbuild.gnu.c.optimization.level.more" valueType="enumerated"/>
-								<option id="gnu.c.compiler.option.debugging.level.2139237845" name="Debug Level" superClass="gnu.c.compiler.option.debugging.level" useByScannerDiscovery="false" value="gnu.c.debugging.level.none" valueType="enumerated"/>
+								<option id="gnu.c.compiler.option.debugging.level.2139237845" name="Debug Level" superClass="gnu.c.compiler.option.debugging.level" useByScannerDiscovery="false" value="gnu.c.debugging.level.max" valueType="enumerated"/>
 								<option id="gnu.c.compiler.option.include.paths.1770182855" name="Include paths (-I)" superClass="gnu.c.compiler.option.include.paths" useByScannerDiscovery="false" valueType="includePath">
 									<listOptionValue builtIn="false" value="&quot;${ProjDirPath}/inc&quot;"/>
 									<listOptionValue builtIn="false" value="&quot;${ProjDirPath}/CMSIS/core&quot;"/>
@@ -150,12 +150,14 @@
 									<listOptionValue builtIn="false" value="USE_RTOS_SYSTICK"/>
 								</option>
 								<option id="gnu.c.compiler.option.dialect.std.356859384" name="Language standard" superClass="gnu.c.compiler.option.dialect.std" useByScannerDiscovery="true" value="gnu.c.compiler.dialect.default" valueType="enumerated"/>
+								<option id="fr.ac6.managedbuild.tool.gnu.cross.c.compiler.fdata.1580070223" name="Place the data in their own section (-fdata-sections)" superClass="fr.ac6.managedbuild.tool.gnu.cross.c.compiler.fdata" useByScannerDiscovery="false" value="true" valueType="boolean"/>
+								<option id="gnu.c.compiler.option.misc.pic.1841660469" name="Position Independent Code (-fPIC)" superClass="gnu.c.compiler.option.misc.pic" useByScannerDiscovery="false" value="false" valueType="boolean"/>
 								<inputType id="fr.ac6.managedbuild.tool.gnu.cross.c.compiler.input.c.747173367" superClass="fr.ac6.managedbuild.tool.gnu.cross.c.compiler.input.c"/>
 								<inputType id="fr.ac6.managedbuild.tool.gnu.cross.c.compiler.input.s.1210653460" superClass="fr.ac6.managedbuild.tool.gnu.cross.c.compiler.input.s"/>
 							</tool>
 							<tool id="fr.ac6.managedbuild.tool.gnu.cross.cpp.compiler.1414722294" name="MCU G++ Compiler" superClass="fr.ac6.managedbuild.tool.gnu.cross.cpp.compiler">
 								<option id="fr.ac6.managedbuild.gnu.cpp.compiler.option.optimization.level.1489744363" name="Optimization Level" superClass="fr.ac6.managedbuild.gnu.cpp.compiler.option.optimization.level" useByScannerDiscovery="false" value="fr.ac6.managedbuild.gnu.cpp.optimization.level.more" valueType="enumerated"/>
-								<option id="gnu.cpp.compiler.option.debugging.level.641509376" name="Debug Level" superClass="gnu.cpp.compiler.option.debugging.level" useByScannerDiscovery="false" value="gnu.cpp.compiler.debugging.level.none" valueType="enumerated"/>
+								<option id="gnu.cpp.compiler.option.debugging.level.641509376" name="Debug Level" superClass="gnu.cpp.compiler.option.debugging.level" useByScannerDiscovery="false" value="gnu.cpp.compiler.debugging.level.max" valueType="enumerated"/>
 								<option id="gnu.cpp.compiler.option.include.paths.105977434" name="Include paths (-I)" superClass="gnu.cpp.compiler.option.include.paths" useByScannerDiscovery="false" valueType="includePath">
 									<listOptionValue builtIn="false" value="&quot;${ProjDirPath}/inc&quot;"/>
 									<listOptionValue builtIn="false" value="&quot;${ProjDirPath}/CMSIS/core&quot;"/>
@@ -175,12 +177,14 @@
 									<listOptionValue builtIn="false" value="USE_RTOS_SYSTICK"/>
 								</option>
 								<option id="gnu.cpp.compiler.option.dialect.std.2101054556" name="Language standard" superClass="gnu.cpp.compiler.option.dialect.std" useByScannerDiscovery="true" value="gnu.cpp.compiler.dialect.default" valueType="enumerated"/>
+								<option id="fr.ac6.managedbuild.tool.gnu.cross.cpp.compiler.fdata.1877154487" name="Place the data in their own section (-fdata-sections)" superClass="fr.ac6.managedbuild.tool.gnu.cross.cpp.compiler.fdata" useByScannerDiscovery="false" value="true" valueType="boolean"/>
 								<inputType id="fr.ac6.managedbuild.tool.gnu.cross.cpp.compiler.input.cpp.688034595" superClass="fr.ac6.managedbuild.tool.gnu.cross.cpp.compiler.input.cpp"/>
 								<inputType id="fr.ac6.managedbuild.tool.gnu.cross.cpp.compiler.input.s.6473827" superClass="fr.ac6.managedbuild.tool.gnu.cross.cpp.compiler.input.s"/>
 							</tool>
 							<tool id="fr.ac6.managedbuild.tool.gnu.cross.c.linker.1409185098" name="MCU GCC Linker" superClass="fr.ac6.managedbuild.tool.gnu.cross.c.linker"/>
 							<tool id="fr.ac6.managedbuild.tool.gnu.cross.cpp.linker.162825548" name="MCU G++ Linker" superClass="fr.ac6.managedbuild.tool.gnu.cross.cpp.linker">
 								<option id="gnu.cpp.link.option.strip.459660118" name="Omit all symbol information (-s)" superClass="gnu.cpp.link.option.strip" useByScannerDiscovery="false" value="true" valueType="boolean"/>
+								<option id="fr.ac6.managedbuild.tool.gnu.cross.cpp.linker.gcsections.664103720" name="Discard unused sections (-Wl,--gc-sections)" superClass="fr.ac6.managedbuild.tool.gnu.cross.cpp.linker.gcsections" useByScannerDiscovery="false" value="true" valueType="boolean"/>
 								<inputType id="cdt.managedbuild.tool.gnu.cpp.linker.input.1735005640" superClass="cdt.managedbuild.tool.gnu.cpp.linker.input">
 									<additionalInput kind="additionalinputdependency" paths="$(USER_OBJS)"/>
 									<additionalInput kind="additionalinput" paths="$(LIBS)"/>
@@ -201,6 +205,10 @@
 								<inputType id="cdt.managedbuild.tool.gnu.assembler.input.1588000933" superClass="cdt.managedbuild.tool.gnu.assembler.input"/>
 								<inputType id="fr.ac6.managedbuild.tool.gnu.cross.assembler.input.1118741214" superClass="fr.ac6.managedbuild.tool.gnu.cross.assembler.input"/>
 							</tool>
+							<tool id="fr.ac6.managedbuild.tool.gnu.cross.assembler.exe.release.63862661" name="MCU GCC Assembler" superClass="fr.ac6.managedbuild.tool.gnu.cross.assembler.exe.release">
+								<inputType id="cdt.managedbuild.tool.gnu.assembler.input.983697759" superClass="cdt.managedbuild.tool.gnu.assembler.input"/>
+								<inputType id="fr.ac6.managedbuild.tool.gnu.cross.assembler.input.1721181053" superClass="fr.ac6.managedbuild.tool.gnu.cross.assembler.input"/>
+							</tool>
 						</toolChain>
 					</folderInfo>
 					<sourceEntries>

workspace/TS100/.settings/language.settings.xml

@@ -1,27 +1,27 @@
-<?xml version="1.0" encoding="UTF-8" standalone="no"?>
-<project>
-	<configuration id="fr.ac6.managedbuild.config.gnu.cross.exe.debug.1352500998" name="Debug">
-		<extension point="org.eclipse.cdt.core.LanguageSettingsProvider">
-			<provider copy-of="extension" id="org.eclipse.cdt.ui.UserLanguageSettingsProvider"/>
-			<provider-reference id="org.eclipse.cdt.core.ReferencedProjectsLanguageSettingsProvider" ref="shared-provider"/>
-			<provider-reference id="org.eclipse.cdt.managedbuilder.core.MBSLanguageSettingsProvider" ref="shared-provider"/>
-			<provider copy-of="extension" id="org.eclipse.cdt.managedbuilder.core.GCCBuildCommandParser"/>
-			<provider class="fr.ac6.mcu.ide.build.CrossBuiltinSpecsDetector" console="false" env-hash="-1512662983927490956" id="fr.ac6.mcu.ide.build.CrossBuiltinSpecsDetector" keep-relative-paths="false" name="Ac6 SW4 STM32 MCU Built-in Compiler Settings" parameter="${COMMAND} ${FLAGS} -E -P -v -dD &quot;${INPUTS}&quot;" prefer-non-shared="true">
-				<language-scope id="org.eclipse.cdt.core.gcc"/>
-				<language-scope id="org.eclipse.cdt.core.g++"/>
-			</provider>
-		</extension>
-	</configuration>
-	<configuration id="fr.ac6.managedbuild.config.gnu.cross.exe.release.723264573" name="Release">
-		<extension point="org.eclipse.cdt.core.LanguageSettingsProvider">
-			<provider copy-of="extension" id="org.eclipse.cdt.ui.UserLanguageSettingsProvider"/>
-			<provider-reference id="org.eclipse.cdt.core.ReferencedProjectsLanguageSettingsProvider" ref="shared-provider"/>
-			<provider-reference id="org.eclipse.cdt.managedbuilder.core.MBSLanguageSettingsProvider" ref="shared-provider"/>
-			<provider copy-of="extension" id="org.eclipse.cdt.managedbuilder.core.GCCBuildCommandParser"/>
-			<provider class="fr.ac6.mcu.ide.build.CrossBuiltinSpecsDetector" console="false" env-hash="-1512662983927490956" id="fr.ac6.mcu.ide.build.CrossBuiltinSpecsDetector" keep-relative-paths="false" name="Ac6 SW4 STM32 MCU Built-in Compiler Settings" parameter="${COMMAND} ${FLAGS} -E -P -v -dD &quot;${INPUTS}&quot;" prefer-non-shared="true">
-				<language-scope id="org.eclipse.cdt.core.gcc"/>
-				<language-scope id="org.eclipse.cdt.core.g++"/>
-			</provider>
-		</extension>
-	</configuration>
-</project>
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<project>
+	<configuration id="fr.ac6.managedbuild.config.gnu.cross.exe.debug.1352500998" name="Debug">
+		<extension point="org.eclipse.cdt.core.LanguageSettingsProvider">
+			<provider copy-of="extension" id="org.eclipse.cdt.ui.UserLanguageSettingsProvider"/>
+			<provider-reference id="org.eclipse.cdt.core.ReferencedProjectsLanguageSettingsProvider" ref="shared-provider"/>
+			<provider-reference id="org.eclipse.cdt.managedbuilder.core.MBSLanguageSettingsProvider" ref="shared-provider"/>
+			<provider copy-of="extension" id="org.eclipse.cdt.managedbuilder.core.GCCBuildCommandParser"/>
+			<provider class="fr.ac6.mcu.ide.build.CrossBuiltinSpecsDetector" console="false" env-hash="3703734836139458" id="fr.ac6.mcu.ide.build.CrossBuiltinSpecsDetector" keep-relative-paths="false" name="Ac6 SW4 STM32 MCU Built-in Compiler Settings" parameter="${COMMAND} ${FLAGS} -E -P -v -dD &quot;${INPUTS}&quot;" prefer-non-shared="true">
+				<language-scope id="org.eclipse.cdt.core.gcc"/>
+				<language-scope id="org.eclipse.cdt.core.g++"/>
+			</provider>
+		</extension>
+	</configuration>
+	<configuration id="fr.ac6.managedbuild.config.gnu.cross.exe.release.723264573" name="Release">
+		<extension point="org.eclipse.cdt.core.LanguageSettingsProvider">
+			<provider copy-of="extension" id="org.eclipse.cdt.ui.UserLanguageSettingsProvider"/>
+			<provider-reference id="org.eclipse.cdt.core.ReferencedProjectsLanguageSettingsProvider" ref="shared-provider"/>
+			<provider-reference id="org.eclipse.cdt.managedbuilder.core.MBSLanguageSettingsProvider" ref="shared-provider"/>
+			<provider copy-of="extension" id="org.eclipse.cdt.managedbuilder.core.GCCBuildCommandParser"/>
+			<provider class="fr.ac6.mcu.ide.build.CrossBuiltinSpecsDetector" console="false" env-hash="3703734836139458" id="fr.ac6.mcu.ide.build.CrossBuiltinSpecsDetector" keep-relative-paths="false" name="Ac6 SW4 STM32 MCU Built-in Compiler Settings" parameter="${COMMAND} ${FLAGS} -E -P -v -dD &quot;${INPUTS}&quot;" prefer-non-shared="true">
+				<language-scope id="org.eclipse.cdt.core.gcc"/>
+				<language-scope id="org.eclipse.cdt.core.g++"/>
+			</provider>
+		</extension>
+	</configuration>
+</project>

workspace/TS100/Makefile

@@ -35,7 +35,7 @@ OPTIM=-O2 -finline-small-functions -findirect-inlining -fdiagnostics-color
 
 
 # global defines ---------------------------------------------------------------
-GLOBAL_DEFINES += -D STM32F103T8Ux -D STM32F1 -D STM32 -D USE_HAL_DRIVER -D STM32F103xB -D USE_RTOS_SYSTICK -D LANG_$(lang)
+GLOBAL_DEFINES += -D STM32F103T8Ux -D STM32F1 -D STM32 -D USE_HAL_DRIVER -D STM32F103xB -D USE_RTOS_SYSTICK -D LANG_$(lang) -D LANG
 
 # Enable debug code generation
 DEBUG=-g

workspace/TS100/inc/Font.h

@@ -10,6 +10,9 @@
 #ifndef FONT_H_
 #define FONT_H_
 #include "Translation.h"
+
+#define FONT_12_WIDTH   12
+
 /*
  * Remember screen is LSB at the top, MSB at the bottom of the strip!
  */
@@ -490,8 +493,8 @@ const uint8_t ExtraFontChars[] = {
 		0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x38,0x38,0x38,0x38,0x38,0x38,0x38,0x38,0x38,0x10,0x10, // cooling
 		0x00,0x60,0xE0,0xFE,0xE0,0xE0,0xE0,0xE0,0xFE,0xE0,0x60,0x00,0x00,0x00,0x00,0x01,0x03,0xFF,0xFF,0x03,0x01,0x00,0x00,0x00, // AC
 
-		0xE0,0xF0,0x98,0x18,0x18,0x18,0x18,0xD8,0x78,0x38,0xFC,0xE6,0x1F,0x3F,0x61,0x63,0x66,0x6C,0x67,0x61,0x60,0x60,0x3F,0x1F, // checkbox on
-		0xE0,0xF0,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0xF0,0xE0,0x1F,0x3F,0x60,0x60,0x60,0x60,0x60,0x60,0x60,0x60,0x3F,0x1F  // checkbox off
+		0xFC,0x02,0x02,0x02,0x02,0x02,0x02,0x82,0x62,0x1A,0x02,0xFC,0x3F,0x40,0x42,0x46,0x4C,0x58,0x46,0x41,0x40,0x40,0x40,0x3F, // ☑ (check box on, menu true)
+		0xFC,0x02,0x02,0x02,0x02,0x02,0x02,0x02,0x02,0x02,0x02,0xFC,0x3F,0x40,0x40,0x40,0x40,0x40,0x40,0x40,0x40,0x40,0x40,0x3F, // ☐ (check box off, menu false)
 
 		/*
 		0x00,0x00,0x00,0x80,0x80,0xFE,0xFF,0x83,0x87,0x06,0x00,0x00,0x00,0x00,0x30,0x70,0x60,0x7F,0x3F,0x00,0x00,0x00,0x00,0x00, // Function?
@@ -592,6 +595,47 @@ const uint8_t idleScreenBGF[] = {
 		0x87,0x86,0x86,0x86,0x82,0x80,0x40,0x40,0x20,0x18,0x07,0x00 
 };
 
+/*
+ * 16x16 icons
+ * */
+const uint8_t SettingsMenuIcons[] = {
+
+	// Soldering
+	//width = 16
+	//height = 16
+	0x00,0x02,0x04,0x08,0x12,0x24,0xC4,0x42,0x82,0x04,0x00,0x00,0x00,0x00,0x00,0x00,
+	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x02,0x07,0x0A,0x14,0x28,0x50,0x60,0x00,
+
+
+
+	//Sleep
+	//width = 16
+	//height = 16
+	0x00,0xC6,0xE6,0xF6,0xBE,0x9E,0x8E,0x86,0x00,0x00,0x40,0x40,0xC0,0xC0,0xC0,0x00,
+	0x00,0x01,0x01,0x01,0x45,0x65,0x75,0x5D,0x4C,0x00,0x06,0x07,0x07,0x05,0x04,0x00,
+
+
+
+	//Menu
+	//width = 16
+	//height = 16
+	0x00,0x80,0x06,0x86,0x46,0x06,0x86,0x86,0x86,0x86,0x86,0x86,0x86,0x86,0x86,0x00,
+	0x00,0x00,0x61,0x60,0x00,0x00,0x61,0x61,0x61,0x61,0x61,0x61,0x61,0x61,0x61,0x00,
+
+	//Wrench
+	///width = 16
+	//height = 16
+	0x00,0x18,0x30,0x32,0x7E,0x7C,0xF0,0xC0,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x03,0x0F,0x3E,0x7E,0x4C,0x0C,0x18,0x00,
+	#ifdef NOTUSED
+	//Calibration (Not used, kept for future menu layouts)
+		//width = 16
+		//height = 16
+		0x00,0x00,0x00,0x00,0x00,0x00,0x80,0xC0,0xE8,0x70,0x7A,0x5E,0x8E,0x1C,0x30,0x00,
+		0x00,0x10,0x38,0x1C,0x0E,0x07,0x03,0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+	#endif
+};
+
 const uint8_t FONT_6x8[] = {
 		0x00, 0x00, 0x00, 0x00, 0x00, 0x00,    // 000: ' ' U+0020 (utf-8: 20)
 		0x00, 0x00, 0x4f, 0x00, 0x00, 0x00,    // 001: '!' U+0021 (utf-8: 21)
@@ -898,8 +942,8 @@ const uint8_t FONT_6x8[] = {
 		0x20, 0x55, 0x55, 0x55, 0x78, 0x00,    // 193: 'ā' U+0101 (utf-8: c4 81)
 		0x78, 0x15, 0x16, 0x15, 0x78, 0x00,    // 194: 'Ă' U+0102 (utf-8: c4 82)
 		0x20, 0x55, 0x56, 0x55, 0x78, 0x00,    // 195: 'ă' U+0103 (utf-8: c4 83)
-		0x00, 0x00, 0x00, 0x00, 0x00, 0x00,    // 196: 'Ą' U+0104 (utf-8: c4 84)
-		0x00, 0x00, 0x00, 0x00, 0x00, 0x00,    // 197: 'ą' U+0105 (utf-8: c4 85)
+		0x7e, 0x09, 0x09, 0x49, 0xbe, 0x00,    // 196: 'Ą' U+0104 (utf-8: c4 84)
+		0x20, 0x54, 0x54, 0xd4, 0x78, 0x00,    // 197: 'ą' U+0105 (utf-8: c4 85)
 		0x38, 0x44, 0x46, 0x45, 0x28, 0x00,    // 198: 'Ć' U+0106 (utf-8: c4 86)
 		0x38, 0x44, 0x46, 0x45, 0x20, 0x00,    // 199: 'ć' U+0107 (utf-8: c4 87)
 		0x38, 0x46, 0x45, 0x46, 0x28, 0x00,    // 200: 'Ĉ' U+0108 (utf-8: c4 88)
@@ -918,8 +962,8 @@ const uint8_t FONT_6x8[] = {
 		0x38, 0x55, 0x56, 0x55, 0x08, 0x00,    // 213: 'ĕ' U+0115 (utf-8: c4 95)
 		0x7c, 0x54, 0x55, 0x54, 0x44, 0x00,    // 214: 'Ė' U+0116 (utf-8: c4 96)
 		0x38, 0x54, 0x55, 0x54, 0x08, 0x00,    // 215: 'ė' U+0117 (utf-8: c4 97)
-		0x00, 0x00, 0x00, 0x00, 0x00, 0x00,    // 216: 'Ę' U+0118 (utf-8: c4 98)
-		0x00, 0x00, 0x00, 0x00, 0x00, 0x00,    // 217: 'ę' U+0119 (utf-8: c4 99)
+		0x7f, 0x49, 0x49, 0xc9, 0x41, 0x00,    // 216: 'Ę' U+0118 (utf-8: c4 98)
+		0x38, 0x54, 0x54, 0xd4, 0x18, 0x00,    // 217: 'ę' U+0119 (utf-8: c4 99)
 		0x7c, 0x55, 0x56, 0x55, 0x44, 0x00,    // 218: 'Ě' U+011a (utf-8: c4 9a)
 		0x38, 0x55, 0x56, 0x55, 0x08, 0x00,    // 219: 'ě' U+011b (utf-8: c4 9b)
 		0x38, 0x46, 0x55, 0x56, 0x70, 0x00,    // 220: 'Ĝ' U+011c (utf-8: c4 9c)
@@ -940,8 +984,8 @@ const uint8_t FONT_6x8[] = {
 		0x00, 0x45, 0x7d, 0x41, 0x00, 0x00,    // 235: 'ī' U+012b (utf-8: c4 ab)
 		0x44, 0x45, 0x7e, 0x45, 0x44, 0x00,    // 236: 'Ĭ' U+012c (utf-8: c4 ac)
 		0x00, 0x45, 0x7e, 0x41, 0x00, 0x00,    // 237: 'ĭ' U+012d (utf-8: c4 ad)
-		0x00, 0x00, 0x00, 0x00, 0x00, 0x00,    // 238: 'Į' U+012e (utf-8: c4 ae)
-		0x00, 0x00, 0x00, 0x00, 0x00, 0x00,    // 239: 'į' U+012f (utf-8: c4 af)
+		0x00, 0x41, 0x7f, 0xc1, 0x00, 0x00,    // 238: 'Į' U+012e (utf-8: c4 ae)
+		0x00, 0x44, 0x7d, 0xc0, 0x00, 0x00,    // 239: 'į' U+012f (utf-8: c4 af)
 		0x44, 0x44, 0x7d, 0x44, 0x44, 0x00,    // 240: 'İ' U+0130 (utf-8: c4 b0)
 		0x00, 0x44, 0x7c, 0x40, 0x00, 0x00,    // 241: 'ı' U+0131 (utf-8: c4 b1)
 		0x00, 0x00, 0x00, 0x00, 0x00, 0x00,    // 242: 'IJ' U+0132 (utf-8: c4 b2)

workspace/TS100/inc/LIS2DH12.hpp

@@ -0,0 +1,27 @@
+/*
+ * LIS2DH12.hpp
+ *
+ *  Created on: 27Feb.,2018
+ *      Author: Ralim
+ */
+
+#ifndef LIS2DH12_HPP_
+#define LIS2DH12_HPP_
+#include "stm32f1xx_hal.h"
+#include "LIS2DH12_defines.hpp"
+class LIS2DH12 {
+public:
+	LIS2DH12(I2C_HandleTypeDef* i2cHandle);
+	void initalize();
+	uint8_t getOrientation();
+	void getAxisReadings(int16_t *x, int16_t *y, int16_t *z);
+
+private:
+	void setSensitivity(uint8_t threshold, uint8_t filterTime);	// Sets the sensitivity of the unit
+
+	void I2C_RegisterWrite(uint8_t reg, uint8_t data);
+	uint8_t I2C_RegisterRead(uint8_t reg);
+	I2C_HandleTypeDef* i2c;
+};
+
+#endif /* LIS2DH12_HPP_ */

workspace/TS100/inc/LIS2DH12_defines.hpp

@@ -0,0 +1,28 @@
+/*
+ * LIS2DH12_defines.hpp
+ *
+ *  Created on: 27Feb.,2018
+ *      Author: Ralim
+ */
+
+#ifndef LIS2DH12_DEFINES_HPP_
+#define LIS2DH12_DEFINES_HPP_
+
+
+#define LIS2DH_I2C_ADDRESS (25<<1)
+
+#define LIS_CTRL_REG1 0x20|0x80
+#define LIS_CTRL_REG2 0x21|0x80
+#define LIS_CTRL_REG3 0x22|0x80
+#define LIS_CTRL_REG4 0x23|0x80
+#define LIS_CTRL_REG5 0x24|0x80
+#define LIS_CTRL_REG6 0x25|0x80
+#define LIS_INT1_CFG  0xB0|0x80
+#define LIS_INT2_CFG  0xB4|0x80
+#define LIS_INT1_DURATION 0x33|0x80
+#define LIS_INT1_THS 0x32|0x80
+#define LIS_INT1_SRC 0x31|0x80
+#define LIS_INT2_DURATION 0x37|0x80
+#define LIS_INT2_THS 0x36|0x80
+#define LIS_INT2_SRC 0x35|0x80
+#endif /* LIS2DH12_DEFINES_HPP_ */

workspace/TS100/inc/MMA8652FC.hpp

@@ -15,7 +15,7 @@ public:
 
 	MMA8652FC(I2C_HandleTypeDef* i2cHandle);
 	void initalize();		// Initalize the system
-	bool getOrientation();// Reads the I2C register and returns the orientation (true == left)
+	uint8_t getOrientation();// Reads the I2C register and returns the orientation (true == left)
 	void getAxisReadings(int16_t *x, int16_t *y, int16_t *z);
 
 private:

workspace/TS100/inc/OLED.hpp

@@ -21,6 +21,7 @@ extern "C" {
 }
 #endif
 #define DEVICEADDR_OLED  (0x3c<<1)
+#define OLED_WIDTH       96
 
 class OLED {
 public:

workspace/TS100/inc/Settings.h

@@ -11,7 +11,7 @@
 #define SETTINGS_H_
 #include <stdint.h>
 #include "stm32f1xx_hal.h"
-#define SETTINGSVERSION 0x11 /*Change this if you change the struct below to prevent people getting out of sync*/
+#define SETTINGSVERSION 0x12 /*Change this if you change the struct below to prevent people getting out of sync*/
 
 /*
  * This struct must be a multiple of 2 bytes as it is saved / restored from flash in uint16_t chunks
@@ -30,6 +30,7 @@ typedef struct {
 	uint8_t detailedIDLE :1;			//Detailed idle screen
 	uint8_t detailedSoldering :1;		//Detailed soldering screens
 	uint8_t temperatureInF;			//Should the temp be in F or C (true is F)
+	uint8_t descriptionScrollSpeed:1; // Description scroll speed
 	uint16_t voltageDiv;			//Voltage divisor factor
 	uint16_t BoostTemp; 			//Boost mode set point for the iron
 	int16_t CalibrationOffset;		//This stores the temperature offset for this tip in the iron.
@@ -37,7 +38,7 @@ typedef struct {
 	uint32_t padding;    			//This is here for in case we are not an even divisor so that nothing gets cut off
 } systemSettingsType;
 
-extern systemSettingsType systemSettings;
+extern volatile systemSettingsType systemSettings;
 
 void saveSettings();
 void restoreSettings();

workspace/TS100/inc/Setup.h

@@ -18,8 +18,7 @@ extern ADC_HandleTypeDef hadc1;
 extern DMA_HandleTypeDef hdma_adc1;
 
 extern I2C_HandleTypeDef hi2c1;
-extern DMA_HandleTypeDef hdma_i2c1_rx;
-extern DMA_HandleTypeDef hdma_i2c1_tx;
+
 
 extern IWDG_HandleTypeDef hiwdg;
 

workspace/TS100/inc/Translation.h

@@ -17,15 +17,28 @@ enum ShortNameType {
  * use SettingsShortNames as SettingsShortNames[16][1].. second column undefined
  */
 extern const enum ShortNameType SettingsShortNameType;
-extern const char* SettingsShortNames[16][2];
-extern const char* SettingsLongNames[16];
+extern const char* SettingsShortNames[17][2];
+extern const char* SettingsDescriptions[17];
+extern const char* SettingsMenuEntries[4];
+extern const char* SettingsMenuEntriesDescriptions[4];
+
 extern const char* SettingsCalibrationWarning;
 extern const char* SettingsResetWarning;
 extern const char* UVLOWarningString;
+extern const char* UndervoltageString;
+extern const char* InputVoltageString;
+extern const char* WarningTipTempString;
+extern const char* BadTipString;
+
 extern const char* SleepingSimpleString;
 extern const char* SleepingAdvancedString;
 extern const char* WarningSimpleString;
 extern const char* WarningAdvancedString;
+extern const char* SleepingTipAdvancedString;
+extern const char* IdleTipString;
+extern const char* IdleSetString;
+extern const char* TipDisconnectedString;
+extern const char* SolderingAdvancedPowerPrompt;
 
 extern const char SettingTrueChar;
 extern const char SettingFalseChar;
@@ -33,6 +46,9 @@ extern const char SettingRightChar;
 extern const char SettingLeftChar;
 extern const char SettingAutoChar;
 
-#define LANG_EN
+extern const char SettingFastChar;
+extern const char SettingSlowChar;
+
+
 
 #endif /* TRANSLATION_H_ */

workspace/TS100/inc/gui.hpp

@@ -5,17 +5,21 @@
  *      Author: Ben V. Brown
  */
 
-#ifndef GUI_H_
-#define GUI_H_
+#ifndef GUI_HPP_
+#define GUI_HPP_
+#include "Translation.h"
+#include "Settings.h"
+#include "hardware.h"
+
+#define PRESS_ACCEL_STEP			3
+#define PRESS_ACCEL_INTERVAL_MIN	10
+#define PRESS_ACCEL_INTERVAL_MAX	30
+
 
 //GUI holds the menu structure and all its methods for the menu itself
 
-#include "main.hpp"
-#include "Settings.h"
-#include "Translation.h"
 //Declarations for all the methods for the settings menu (at end of this file)
 
-
 //Wrapper for holding a function pointer
 typedef struct state_func_t {
 	void (*func)(void);
@@ -28,6 +32,7 @@ typedef struct {
 	const state_func draw;
 } menuitem;
 
-extern const menuitem settingsMenu[];
+void enterSettingsMenu();
+extern const menuitem rootSettingsMenu[];
 
-#endif /* GUI_H_ */
+#endif /* GUI_HPP_ */

workspace/TS100/src/LIS2DH12.cpp

@@ -0,0 +1,73 @@
+/*
+ * LIS2DH12.cpp
+ *
+ *  Created on: 27Feb.,2018
+ *      Author: Ralim
+ */
+
+#include <LIS2DH12.hpp>
+#include "cmsis_os.h"
+LIS2DH12::LIS2DH12(I2C_HandleTypeDef* i2cHandle) {
+	i2c = i2cHandle;
+}
+
+void LIS2DH12::initalize() {
+	I2C_RegisterWrite(LIS_CTRL_REG1, 0x17); //25Hz
+	I2C_RegisterWrite(LIS_CTRL_REG2, 0b00001000); //Highpass filter off
+	I2C_RegisterWrite(LIS_CTRL_REG3, 0b01100000); //Setup interrupt pins
+	I2C_RegisterWrite(LIS_CTRL_REG4, 0b00001000); //Block update mode off,HR on
+	I2C_RegisterWrite(LIS_CTRL_REG5, 0b00000010);
+	I2C_RegisterWrite(LIS_CTRL_REG6, 0b01100010);
+
+	//Basically setup the unit to run, and enable 4D orientation detection
+	I2C_RegisterWrite(LIS_INT2_CFG, 0b01111110); //setup for movement detection
+	I2C_RegisterWrite(LIS_INT2_THS, 0x28);
+	I2C_RegisterWrite(LIS_INT2_DURATION, 64);
+	I2C_RegisterWrite(LIS_INT1_CFG, 0b01111110); //setup for movement detection
+	I2C_RegisterWrite(LIS_INT1_THS, 0x28);
+	I2C_RegisterWrite(LIS_INT1_DURATION, 64);
+
+}
+
+//0=no change, 1= right handed, 2= left handed
+uint8_t LIS2DH12::getOrientation() {
+	// 8=right handed,4=left,16=flat
+	//So we ignore if not 8/4
+	uint8_t pos = I2C_RegisterRead(LIS_INT2_SRC);
+	if (pos == 8)
+		return 1;
+	else if (pos == 4)
+		return 2;
+	else
+		return 0;
+}
+
+void LIS2DH12::getAxisReadings(int16_t* x, int16_t* y, int16_t* z) {
+	uint8_t tempArr[6];
+	taskENTER_CRITICAL();
+	while (HAL_I2C_Mem_Read(i2c, LIS2DH_I2C_ADDRESS, 0xA8,
+	I2C_MEMADD_SIZE_8BIT, (uint8_t*) tempArr, 6, 5000) != HAL_OK) {
+		HAL_Delay(5);
+	}
+	taskEXIT_CRITICAL();
+	(*x) = ((uint16_t) (tempArr[1] << 8 | tempArr[0]));
+	(*y) = ((uint16_t) (tempArr[3] << 8 | tempArr[2]));
+	(*z) = ((uint16_t) (tempArr[5] << 8 | tempArr[4]));
+}
+
+void LIS2DH12::setSensitivity(uint8_t threshold, uint8_t filterTime) {
+}
+
+void LIS2DH12::I2C_RegisterWrite(uint8_t reg, uint8_t data) {
+
+	HAL_I2C_Mem_Write(i2c, LIS2DH_I2C_ADDRESS, reg, I2C_MEMADD_SIZE_8BIT, &data,
+			1, 500);
+}
+
+uint8_t LIS2DH12::I2C_RegisterRead(uint8_t reg) {
+	uint8_t tx_data[1];
+	HAL_I2C_Mem_Read(i2c, LIS2DH_I2C_ADDRESS, reg, I2C_MEMADD_SIZE_8BIT,
+			tx_data, 1, 500);
+
+	return tx_data[0];
+}

workspace/TS100/src/MMA8652FC.cpp

@@ -14,12 +14,14 @@ MMA8652FC::MMA8652FC(I2C_HandleTypeDef* i2cHandle) {
 
 void MMA8652FC::I2C_RegisterWrite(uint8_t reg, uint8_t data) {
 
-	HAL_I2C_Mem_Write(i2c, MMA8652FC_I2C_ADDRESS, reg, I2C_MEMADD_SIZE_8BIT, &data, 1, 0xFFFF);
+	HAL_I2C_Mem_Write(i2c, MMA8652FC_I2C_ADDRESS, reg, I2C_MEMADD_SIZE_8BIT,
+			&data, 1, 500);
 }
 
 uint8_t MMA8652FC::I2C_RegisterRead(uint8_t reg) {
 	uint8_t tx_data[1];
-	HAL_I2C_Mem_Read(i2c, MMA8652FC_I2C_ADDRESS, reg, I2C_MEMADD_SIZE_8BIT, tx_data, 1, 0xFFFF);
+	HAL_I2C_Mem_Read(i2c, MMA8652FC_I2C_ADDRESS, reg, I2C_MEMADD_SIZE_8BIT,
+			tx_data, 1, 500);
 
 	return tx_data[0];
 }
@@ -28,49 +30,54 @@ void MMA8652FC::initalize() {
 	I2C_RegisterWrite(CTRL_REG2, 0);    //Normal mode
 	I2C_RegisterWrite( CTRL_REG2, 0x40);	// Reset all registers to POR values
 	HAL_Delay(2);		// ~1ms delay
-	I2C_RegisterWrite(FF_MT_CFG_REG, 0x78);    // Enable motion detection for X, Y, Z axis, latch disabled
+	I2C_RegisterWrite(FF_MT_CFG_REG, 0x78); // Enable motion detection for X, Y, Z axis, latch disabled
 
 	I2C_RegisterWrite(PL_CFG_REG, 0x40);	//Enable the orientation detection
 	I2C_RegisterWrite(PL_COUNT_REG, 200);    //200 count debounce
-	I2C_RegisterWrite(PL_BF_ZCOMP_REG, 0b01000111);    //Set the threshold to 42 degrees
+	I2C_RegisterWrite(PL_BF_ZCOMP_REG, 0b01000111); //Set the threshold to 42 degrees
 	I2C_RegisterWrite(P_L_THS_REG, 0b10011100);    //Up the trip angles
-	I2C_RegisterWrite( CTRL_REG4, 0x01 | (1 << 4));    // Enable dataready interrupt & orientation interrupt
-	I2C_RegisterWrite( CTRL_REG5, 0x01);    // Route data ready interrupts to INT1 ->PB5 ->EXTI5, leaving orientation routed to INT2
-	I2C_RegisterWrite( CTRL_REG2, 0x12);    //Set maximum resolution oversampling
-	I2C_RegisterWrite( XYZ_DATA_CFG_REG, (1 << 4));    //select high pass filtered data
-	I2C_RegisterWrite( HP_FILTER_CUTOFF_REG, 0x03);    //select high pass filtered data
+	I2C_RegisterWrite( CTRL_REG4, 0x01 | (1 << 4)); // Enable dataready interrupt & orientation interrupt
+	I2C_RegisterWrite( CTRL_REG5, 0x01); // Route data ready interrupts to INT1 ->PB5 ->EXTI5, leaving orientation routed to INT2
+	I2C_RegisterWrite( CTRL_REG2, 0x12);   //Set maximum resolution oversampling
+	I2C_RegisterWrite( XYZ_DATA_CFG_REG, (1 << 4)); //select high pass filtered data
+	I2C_RegisterWrite( HP_FILTER_CUTOFF_REG, 0x03); //select high pass filtered data
 
 	I2C_RegisterWrite( CTRL_REG1, 0x19);		// ODR=12 Hz, Active mode
+	HAL_Delay(2);		// ~1ms delay
 
 }
 
 void MMA8652FC::setSensitivity(uint8_t threshold, uint8_t filterTime) {
 	uint8_t sens = 9 * 2 + 17;
 	sens -= 2 * threshold;
+	taskENTER_CRITICAL();
 	I2C_RegisterWrite( CTRL_REG1, 0);		//  sleep mode
-	I2C_RegisterWrite(FF_MT_THS_REG, (sens & 0x7F));		// Set accumulation threshold
+	I2C_RegisterWrite(FF_MT_THS_REG, (sens & 0x7F));// Set accumulation threshold
 	I2C_RegisterWrite(FF_MT_COUNT_REG, filterTime);    // Set debounce threshold
 	I2C_RegisterWrite( CTRL_REG1, 0x31);		// ODR=12 Hz, Active mode
-
+	taskEXIT_CRITICAL();
 }
 
-bool MMA8652FC::getOrientation() {
-	//First read the PL_STATUS registertaskENTER_CRITICAL();
+uint8_t MMA8652FC::getOrientation() {
+	//First read the PL_STATUS register
 	taskENTER_CRITICAL();
 	uint8_t plStatus = I2C_RegisterRead(PL_STATUS_REG);
 	taskEXIT_CRITICAL();
-	plStatus >>= 1;    //We don't need the up/down bit
-	plStatus &= 0x03;    //mask to the two lower bits
-	//0 == left handed
-	//1 == right handed
+	if ((plStatus & 0b10000000) == 0b10000000) {
+		plStatus >>= 1;    //We don't need the up/down bit
+		plStatus &= 0x03;    //mask to the two lower bits
+		//0 == left handed
+		//1 == right handed
 
-	return !plStatus;
+		return plStatus==0?2:1;
+	} else
+		return 0;
 }
 void MMA8652FC::getAxisReadings(int16_t *x, int16_t *y, int16_t *z) {
 	uint8_t tempArr[6];
 	taskENTER_CRITICAL();
-	while (HAL_I2C_Mem_Read(i2c, MMA8652FC_I2C_ADDRESS, OUT_X_MSB_REG, I2C_MEMADD_SIZE_8BIT, (uint8_t*) tempArr, 6,
-			0xFFFF) != HAL_OK) {
+	while (HAL_I2C_Mem_Read(i2c, MMA8652FC_I2C_ADDRESS, OUT_X_MSB_REG,
+	I2C_MEMADD_SIZE_8BIT, (uint8_t*) tempArr, 6, 0xFFFF) != HAL_OK) {
 		HAL_Delay(5);
 	}
 	taskEXIT_CRITICAL();

workspace/TS100/src/OLED.cpp

@@ -90,7 +90,7 @@ void OLED::refresh() {
 	//Because I2C is shared, we cant task switch in the middle of the xfer
 
 	HAL_I2C_Master_Transmit(i2c, DEVICEADDR_OLED, screenBuffer, 12 + 96 * 2 + 1,
-			0xFFFF);
+			500);
 	taskEXIT_CRITICAL();
 
 }
@@ -101,6 +101,11 @@ void OLED::refresh() {
  * Precursor is the command char that is used to select the table.
  */
 void OLED::drawChar(char c, char PrecursorCommand) {
+	if( c=='\n' && cursor_y==0)
+	{
+		cursor_x=0;
+		cursor_y=8;
+	}
 	if (c < ' ') {
 		return;
 	}
@@ -286,25 +291,32 @@ void OLED::drawSymbol(uint8_t symbolID) {
 void OLED::drawArea(int16_t x, int8_t y, uint8_t wide, uint8_t height,
 		const uint8_t* ptr) {
 	// Splat this from x->x+wide in two strides
-	if (x < 0)
+	if (x <= -wide)
 		return;    //cutoffleft
-	if ((x) > 96)
+	if (x > 96)
 		return;    //cutoff right
-	uint8_t width = wide;
-	if ((x + wide) > 96)
-		width = 96 - x; // trimming to draw partials
+
+	uint8_t visibleStart = 0;
+	uint8_t visibleEnd = wide;
+
+	// trimming to draw partials
+	if(x < 0) {
+	  visibleStart -= x;  //subtract negative value == add absolute value
+	}
+	if(x + wide > 96) {
+	  visibleEnd = 96 - x;
+	}
 
 	if (y == 0) {
 		//Splat first line of data
-		for (uint8_t xx = 0; xx < (width); xx++) {
+		for (uint8_t xx = visibleStart; xx < visibleEnd; xx++) {
 			firstStripPtr[xx + x] = ptr[xx];
 		}
 	}
 	if (y == 8 || height == 16) {
 		// Splat the second line
-		for (uint8_t xx = 0; xx < width; xx++) {
+		for (uint8_t xx = visibleStart; xx < visibleEnd; xx++) {
 			secondStripPtr[x + xx] = ptr[xx + (height == 16 ? wide : 0)];
-
 		}
 	}
 }

workspace/TS100/src/Settings.cpp

@@ -11,7 +11,7 @@
 #include "Setup.h"
 #define FLASH_ADDR 		(0x8000000|0xFC00)/*Flash start OR'ed with the maximum amount of flash - 1024 bytes*/
 #include "string.h"
-systemSettingsType systemSettings;
+volatile systemSettingsType systemSettings;
 
 void saveSettings() {
 	//First we erase the flash
@@ -89,6 +89,7 @@ void resetSettings() {
 	systemSettings.coolingTempBlink = 0;				//Blink the temperature on the cooling screen when its > 50C
 	systemSettings.CalibrationOffset = 10;		//This appears to be quite close for both of my tips, in both of my handles
 	systemSettings.temperatureInF = 0;			//default to 0
+	systemSettings.descriptionScrollSpeed=0;//default to slow
 	saveSettings();
 }
 

workspace/TS100/src/Setup.c

@@ -9,8 +9,6 @@ ADC_HandleTypeDef hadc1;
 DMA_HandleTypeDef hdma_adc1;
 
 I2C_HandleTypeDef hi2c1;
-DMA_HandleTypeDef hdma_i2c1_rx;
-DMA_HandleTypeDef hdma_i2c1_tx;
 
 IWDG_HandleTypeDef hiwdg;
 TIM_HandleTypeDef htim2;
@@ -60,27 +58,29 @@ void SystemClock_Config(void) {
 
 	/**Initializes the CPU, AHB and APB busses clocks
 	 */
-	RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_LSI;
+	RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI
+			| RCC_OSCILLATORTYPE_LSI;
 	RCC_OscInitStruct.HSIState = RCC_HSI_ON;
 	RCC_OscInitStruct.HSICalibrationValue = 16;
 	RCC_OscInitStruct.LSIState = RCC_LSI_ON;
 	RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
 	RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI_DIV2;
-	RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL16;
+	RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL16;    //64MHz
 	HAL_RCC_OscConfig(&RCC_OscInitStruct);
 
 	/**Initializes the CPU, AHB and APB busses clocks
 	 */
-	RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2;
+	RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK
+			| RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2;
 	RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
 	RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
-	RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV16;
-	RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1;
+	RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV16; //TIM 2,3,4,5,6,7,12,13,14
+	RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; //64 mhz to soem peripherals and adc
 
 	HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2);
 
 	PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_ADC;
-	PeriphClkInit.AdcClockSelection = RCC_ADCPCLK2_DIV2;
+	PeriphClkInit.AdcClockSelection = RCC_ADCPCLK2_DIV6; //6 or 8 are the only non overclocked options
 	HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit);
 
 	/**Configure the Systick interrupt time
@@ -100,7 +100,6 @@ static void MX_ADC1_Init(void) {
 
 	ADC_ChannelConfTypeDef sConfig;
 	ADC_InjectionConfTypeDef sConfigInjected;
-
 	/**Common config
 	 */
 	hadc1.Instance = ADC1;
@@ -127,10 +126,15 @@ static void MX_ADC1_Init(void) {
 
 	/**Configure Injected Channel
 	 */
+	//F in = 10.66 MHz
+	/*
+	 * Injected time is 1 delay clock + (12 adc cycles*4)+4*sampletime =~217 clocks = 0.2ms
+	 *
+	 * */
 	sConfigInjected.InjectedChannel = ADC_CHANNEL_8;
 	sConfigInjected.InjectedRank = 1;
 	sConfigInjected.InjectedNbrOfConversion = 4;
-	sConfigInjected.InjectedSamplingTime = ADC_SAMPLETIME_55CYCLES_5;
+	sConfigInjected.InjectedSamplingTime = ADC_SAMPLETIME_13CYCLES_5;
 	sConfigInjected.ExternalTrigInjecConv = ADC_EXTERNALTRIGINJECCONV_T2_CC1;
 	sConfigInjected.AutoInjectedConv = DISABLE;
 	sConfigInjected.InjectedDiscontinuousConvMode = DISABLE;
@@ -142,14 +146,14 @@ static void MX_ADC1_Init(void) {
 	HAL_ADCEx_InjectedConfigChannel(&hadc1, &sConfigInjected);
 	sConfigInjected.InjectedRank = 4;
 	HAL_ADCEx_InjectedConfigChannel(&hadc1, &sConfigInjected);
-
+	//SET_BIT(hadc1.Instance->CR1, ( ADC_CR1_JEOCIE ));//Enable end of injected conv irq
 }
 
 /* I2C1 init function */
 static void MX_I2C1_Init(void) {
 
 	hi2c1.Instance = I2C1;
-	hi2c1.Init.ClockSpeed = 100000;
+	hi2c1.Init.ClockSpeed = 300000;    //200Khz
 	hi2c1.Init.DutyCycle = I2C_DUTYCYCLE_2;
 	hi2c1.Init.OwnAddress1 = 0;
 	hi2c1.Init.AddressingMode = I2C_ADDRESSINGMODE_7BIT;
@@ -158,8 +162,6 @@ static void MX_I2C1_Init(void) {
 	hi2c1.Init.GeneralCallMode = I2C_GENERALCALL_DISABLE;
 	hi2c1.Init.NoStretchMode = I2C_NOSTRETCH_DISABLE;
 	HAL_I2C_Init(&hi2c1);
-	HAL_NVIC_EnableIRQ(DMA1_Channel6_IRQn);
-	HAL_NVIC_EnableIRQ(DMA1_Channel7_IRQn);
 
 }
 
@@ -168,7 +170,7 @@ static void MX_IWDG_Init(void) {
 
 	hiwdg.Instance = IWDG;
 	hiwdg.Init.Prescaler = IWDG_PRESCALER_256;
-	hiwdg.Init.Reload = 4095;
+	hiwdg.Init.Reload = 50;
 	HAL_IWDG_Init(&hiwdg);
 
 }
@@ -181,10 +183,10 @@ static void MX_TIM3_Init(void) {
 	TIM_OC_InitTypeDef sConfigOC;
 
 	htim3.Instance = TIM3;
-	htim3.Init.Prescaler = 1;
+	htim3.Init.Prescaler = 2;
 	htim3.Init.CounterMode = TIM_COUNTERMODE_UP;
-	htim3.Init.Period = 100;
-	htim3.Init.ClockDivision = TIM_CLOCKDIVISION_DIV4;    //2mhz
+	htim3.Init.Period = 100;    //10 Khz PWM freq
+	htim3.Init.ClockDivision = TIM_CLOCKDIVISION_DIV4;    //4mhz before div
 	htim3.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE;
 	HAL_TIM_Base_Init(&htim3);
 
@@ -232,10 +234,10 @@ static void MX_TIM2_Init(void) {
 
 	//Timer 2 is fairly slow as its being used to run the PWM and trigger the ADC in the PWM off time.
 	htim2.Instance = TIM2;
-	htim2.Init.Prescaler = 1500;
+	htim2.Init.Prescaler = 2000; // pwm out is 10k, we want to run our PWM at around 100hz
 	htim2.Init.CounterMode = TIM_COUNTERMODE_UP;
-	htim2.Init.Period = 120;
-	htim2.Init.ClockDivision = TIM_CLOCKDIVISION_DIV4;    //2mhz
+	htim2.Init.Period = 122;
+	htim2.Init.ClockDivision = TIM_CLOCKDIVISION_DIV4;    //4mhz before divide
 	htim2.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE;
 	HAL_TIM_Base_Init(&htim2);
 
@@ -250,7 +252,12 @@ static void MX_TIM2_Init(void) {
 	HAL_TIMEx_MasterConfigSynchronization(&htim2, &sMasterConfig);
 
 	sConfigOC.OCMode = TIM_OCMODE_PWM1;
-	sConfigOC.Pulse = 110;
+	sConfigOC.Pulse = 117;
+	/*
+	 * It takes 4 milliseconds for output to be stable after PWM turns off.
+	 * Assume ADC samples in 0.5ms
+	 * We need to set this to 100% + 4.5ms
+	 * */
 	sConfigOC.OCPolarity = TIM_OCPOLARITY_HIGH;
 	sConfigOC.OCFastMode = TIM_OCFAST_ENABLE;
 	HAL_TIM_PWM_ConfigChannel(&htim2, &sConfigOC, TIM_CHANNEL_1);
@@ -321,13 +328,15 @@ static void MX_GPIO_Init(void) {
 
 	/*Configure GPIO pins : PA0 PA1 PA2 PA3
 	 PA4 PA5 PA10 PA15 */
-	GPIO_InitStruct.Pin = GPIO_PIN_0 | GPIO_PIN_1 | GPIO_PIN_2 | GPIO_PIN_3 | GPIO_PIN_4 | GPIO_PIN_5 | GPIO_PIN_10
-			| GPIO_PIN_11 | GPIO_PIN_12 | GPIO_PIN_15;
+	GPIO_InitStruct.Pin = GPIO_PIN_0 | GPIO_PIN_1 | GPIO_PIN_2 | GPIO_PIN_3
+			| GPIO_PIN_4 | GPIO_PIN_5 | GPIO_PIN_10 | GPIO_PIN_11 | GPIO_PIN_12
+			| GPIO_PIN_15;
 	GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
 	HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
-	//Set PA 11 and PA 12 to GND to stop usb detection
-	GPIO_InitStruct.Pin = GPIO_PIN_11 | GPIO_PIN_12;
+	//Set PA 11 and PA 12 to GND to stop usb detection, 14 re-rused for debug
+	GPIO_InitStruct.Pin = GPIO_PIN_11 | GPIO_PIN_12 | GPIO_PIN_14 | GPIO_PIN_13;
 	GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
+	GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
 	HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
 	HAL_GPIO_WritePin(GPIOA, GPIO_PIN_11, GPIO_PIN_RESET);
 	HAL_GPIO_WritePin(GPIOA, GPIO_PIN_12, GPIO_PIN_RESET);
@@ -352,7 +361,7 @@ static void MX_GPIO_Init(void) {
 	/*Configure GPIO pins : INT_Orientation_Pin INT_Movement_Pin */
 	GPIO_InitStruct.Pin = INT_Orientation_Pin | INT_Movement_Pin;
 	GPIO_InitStruct.Mode = GPIO_MODE_IT_FALLING;
-	GPIO_InitStruct.Pull = GPIO_PULLUP;    //Technically the IMU is P-P but safer to pullup (very tiny current cost)
+	GPIO_InitStruct.Pull = GPIO_PULLUP; //Technically the IMU is P-P but safer to pullup (very tiny current cost)
 	HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
 
 	/*Configure peripheral I/O remapping */

workspace/TS100/src/Translation.c

@@ -1,826 +0,0 @@
-/*
- * Translation.c
- *
- *  Created on: 31Aug.,2017
- *      Author: Ben V. Brown
- */
-#include "Translation.h"
-
-// TEMPLATES for short names - choose one and use it as base for your
-// translation:
-
-//const enum ShortNameType SettingsShortNameType = SHORT_NAME_SINGLE_LINE;
-//const char* SettingsShortNames[16][2] = {
-//  /* (<= 5) Power source (DC or batt)          */ {"PWRSC"},
-//  /* (<= 4) Sleep temperature                  */ {"STMP"},
-//  /* (<= 4) Sleep timeout                      */ {"STME"},
-//  /* (<= 5) Shutdown timeout                   */ {"SHTME"},
-//  /* (<= 6) Motion sensitivity level           */ {"MSENSE"},
-//  /* (<= 6) Temperature in F and C             */ {"TMPUNT"},
-//  /* (<= 6) Advanced idle display mode enabled */ {"ADVIDL"},
-//  /* (<= 6) Display rotation mode              */ {"DSPROT"},
-//  /* (<= 6) Boost enabled                      */ {"BOOST"},
-//  /* (<= 4) Boost temperature                  */ {"BTMP"},
-//  /* (<= 6) Automatic start mode               */ {"ASTART"},
-//  /* (<= 6) Cooldown blink                     */ {"CLBLNK"},
-//  /* (<= 8) Temperature calibration enter menu */ {"TMP CAL?"},
-//  /* (<= 8) Settings reset command             */ {"RESET?"},
-//  /* (<= 8) Calibrate input voltage            */ {"CAL VIN?"},
-//  /* (<= 6) Advanced soldering screen enabled  */ {"ADVSLD"},
-//};
-
-//const enum ShortNameType SettingsShortNameType = SHORT_NAME_DOUBLE_LINE;
-//const char* SettingsShortNames[16][2] = {
-//  /* (<= 11) Power source (DC or batt)          */ {"Power", "source"},
-//  /* (<=  9) Sleep temperature                  */ {"Sleep", "temp"},
-//  /* (<=  9) Sleep timeout                      */ {"Sleep", "timeout"},
-//  /* (<= 11) Shutdown timeout                   */ {"Shutdown", "timeout"},
-//  /* (<= 13) Motion sensitivity level           */ {"Motion", "sensitivity"},
-//  /* (<= 13) Temperature in F and C             */ {"Temperature", "units"},
-//  /* (<= 13) Advanced idle display mode enabled */ {"Detailed", "idle screen"},
-//  /* (<= 13) Display rotation mode              */ {"Display", "orientation"},
-//  /* (<= 13) Boost enabled                      */ {"Boost mode", "enabled"},
-//  /* (<=  9) Boost temperature                  */ {"Boost", "temp"},
-//  /* (<= 13) Automatic start mode               */ {"Auto", "start"},
-//  /* (<= 13) Cooldown blink                     */ {"Cooldown", "blink"},
-//  /* (<= 16) Temperature calibration enter menu */ {"Calibrate", "temperature?"},
-//  /* (<= 16) Settings reset command             */ {"Factory", "Reset?"},
-//  /* (<= 16) Calibrate input voltage            */ {"Calibrate", "input voltage?"},
-//  /* (<= 13) Advanced soldering screen enabled  */ {"Detailed", "solder screen"},
-//};
-
-#ifdef LANG_EN
-const char* SettingsLongNames[16] = {
-  // These are all the help text for all the settings.
-  // No requirements on spacing or length.
-  /* Power source (DC or batt)          */ "Power source. Sets cutoff voltage. <DC 10V> <S 3.3V per cell>",
-  /* Sleep temperature                  */ "Sleep Temperature <C>",
-  /* Sleep timeout                      */ "Sleep Timeout <Minutes/Seconds>",
-  /* Shutdown timeout                   */ "Shutdown Timeout <Minutes>",
-  /* Motion sensitivity level           */ "Motion Sensitivity <0.Off 1.least sensitive 9.most sensitive>",
-  /* Temperature in F and C             */ "Temperature Unit <C=Celsius F=Fahrenheit>",
-  /* Advanced idle display mode enabled */ "Display detailed information in a smaller font on the idle screen.",
-  /* Display rotation mode              */ "Display Orientation <A. Automatic L. Left Handed R. Right Handed>",
-  /* Boost enabled                      */ "Enable front key enters boost mode 450C mode when soldering",
-  /* Boost temperature                  */ "Temperature when in \"boost\" mode",
-  /* Automatic start mode               */ "Automatically starts the iron into soldering on power up. T=Soldering, S= Sleep mode,F=Off",
-  /* Cooldown blink                     */ "Blink the temperature on the cooling screen while the tip is still hot.",
-  /* Temperature calibration enter menu */ "Calibrate tip offset.",
-  /* Settings reset command             */ "Reset all settings",
-  /* Calibrate input voltage            */ "VIN Calibration. Buttons adjust, long press to exit",
-  /* Advanced soldering screen enabled  */ "Display detailed information while soldering",
-};
-
-const char* SettingsCalibrationWarning = "Please ensure the tip is at room temperature before continuing!";
-const char* SettingsResetWarning = "Are you sure to reset settings to default values?";
-const char* UVLOWarningString = "LOW VOLT";          // Fixed width 8 chars
-const char* SleepingSimpleString = "Zzzz";           // Must be <= 4 chars
-const char* SleepingAdvancedString = "Sleeping...";  // <=17 chars
-const char* WarningSimpleString = "HOT!";            // Must be <= 4 chars
-const char* WarningAdvancedString = "WARNING! TIP HOT!";
-
-const char SettingRightChar = 'R';
-const char SettingLeftChar = 'L';
-const char SettingAutoChar = 'A';
-
-const enum ShortNameType SettingsShortNameType = SHORT_NAME_DOUBLE_LINE;
-const char* SettingsShortNames[16][2] = {
-  /* (<= 11) Power source (DC or batt)          */ {"Power", "source"},
-  /* (<=  9) Sleep temperature                  */ {"Sleep", "temp"},
-  /* (<=  9) Sleep timeout                      */ {"Sleep", "timeout"},
-  /* (<= 11) Shutdown timeout                   */ {"Shutdown", "timeout"},
-  /* (<= 13) Motion sensitivity level           */ {"Motion", "sensitivity"},
-  /* (<= 13) Temperature in F and C             */ {"Temperature", "units"},
-  /* (<= 13) Advanced idle display mode enabled */ {"Detailed", "idle screen"},
-  /* (<= 13) Display rotation mode              */ {"Display", "orientation"},
-  /* (<= 13) Boost enabled                      */ {"Boost mode", "enabled"},
-  /* (<=  9) Boost temperature                  */ {"Boost", "temp"},
-  /* (<= 13) Automatic start mode               */ {"Auto", "start"},
-  /* (<= 13) Cooldown blink                     */ {"Cooldown", "blink"},
-  /* (<= 16) Temperature calibration enter menu */ {"Calibrate", "temperature?"},
-  /* (<= 16) Settings reset command             */ {"Factory", "Reset?"},
-  /* (<= 16) Calibrate input voltage            */ {"Calibrate", "input voltage?"},
-  /* (<= 13) Advanced soldering screen enabled  */ {"Detailed", "solder screen"},
-};
-#endif
-
-#ifdef LANG_RU
-const char* SettingsLongNames[16] = {
-	// These are all the help text for all the settings.
-	// No requirements on spacing or length.
-	/* Power source (DC or batt)          */ "Источник питания. Установка напряжения отключения. <DC 10V> <S 3.3 V на батарею>",
-	/* Sleep temperature                  */ "Температура режима ожидания <С>",
-	/* Sleep timeout                      */ "Время до перехода в режим ожидания <Минуты>",
-	/* Shutdown timeout                   */ "Время до отключения <Минуты>",
-	/* Motion sensitivity level           */ "Акселерометр <0. Выкл. 1. мин. чувствительный 9. макс. чувствительный>",
-	/* Temperature in F and C             */ "В чем измерять температуру",
-	/* Advanced idle display mode enabled */ "Показывать детальную информацию маленьким шрифтом на домашнем экране",
-	/* Display rotation mode              */ "Ориентация дисплея <A. Автоматический, Л. Левая рука, П. Правая рука>",
-	/* Boost enabled                      */ "Турбо-режим при удержании кнопки А при пайке ",
-	/* Boost temperature                  */ "Температура в турбо-режиме",
-	/* Automatic start mode               */ "Автоматический запуск паяльника при включении питания. T=Нагрев, S=Режим ожидания,F=Выкл.",
-	/* Cooldown blink                     */ "Показывать температуру на экране охлаждения, пока жало остается горячим.",
-	/* Temperature calibration enter menu */ "Калибровка термодатчика.",
-	/* Settings reset command             */ "Сброс всех настроек.",
-	/* Calibrate input voltage            */ "Калибровка напряжения входа. Настройка кнопками, нажать и удержать чтобы завершить.",
-	/* Advanced soldering screen enabled  */ "Показывать детальную информацию при пайке.",
-};
-
-const char* SettingsCalibrationWarning = "Убедитесь, что жало остыло до комнатной температуры, прежде чем продолжать!";
-const char* SettingsResetWarning = "Are you sure to reset settings to default values?";
-const char* UVLOWarningString = "БАТ РАЗР";          // Fixed width 8 chars
-const char* SleepingSimpleString = "Хррр";           // Must be <= 4 chars
-const char* SleepingAdvancedString = "Ожидание...";  // <=17 chars
-const char* WarningSimpleString = " АЙ!";            // Must be <= 4 chars
-const char* WarningAdvancedString = "ОСТОРОЖНО! ГОРЯЧО";
-
-/*
- * #TODO change support for multibyte constants here
- const char SettingRightChar = 'П';
- const char SettingLeftChar = 'Л';
- const char SettingAutoChar = 'A';*/
-
-const char SettingRightChar = 'R';
-const char SettingLeftChar = 'L';
-const char SettingAutoChar = 'A';
-
-const enum ShortNameType SettingsShortNameType = SHORT_NAME_SINGLE_LINE;
-const char* SettingsShortNames[16][2] = {
-  /* (<= 5) Power source (DC or batt)          */ {"ИстП  "},
-  /* (<= 4) Sleep temperature                  */ {"Тожд"},
-  /* (<= 4) Sleep timeout                      */ {"Вожд "},
-  /* (<= 5) Shutdown timeout                   */ {"Тоткл "},
-  /* (<= 6) Motion sensitivity level           */ {"ЧувсДв "},
-  /* (<= 6) Temperature in F and C             */ {"ЕдТемп "},
-  /* (<= 6) Advanced idle display mode enabled */ {"ИнфОжд "},
-  /* (<= 6) Display rotation mode              */ {"ПовЭкр "},
-  /* (<= 6) Boost enabled                      */ {"Турбо  "},
-  /* (<= 4) Boost temperature                  */ {"Ттур "},
-  /* (<= 6) Automatic start mode               */ {"Астарт"},
-  /* (<= 6) Cooldown blink                     */ {"Охлажд "},
-  /* (<= 8) Temperature calibration enter menu */ {"КалибрТ"},
-  /* (<= 8) Settings reset command             */ {"СБРОС?"},
-  /* (<= 8) Calibrate input voltage            */ {"КалибрU?"},
-  /* (<= 6) Advanced soldering screen enabled  */ {"ИнфПай "},
-};
-#endif
-
-#ifdef LANG_ES
-const char* SettingsLongNames[16] = {
-	// These are all the help text for all the settings.
-	// No requirements on spacing or length.
-  /* Power source (DC or batt)          */ "Fuente de energía. Ajusta el límite inferior de voltaje. <DC=10V S=3.3V por celda>",
-  /* Sleep temperature                  */ "Temperatura en reposo. <C>",
-  /* Sleep timeout                      */ "Tiempo hasta activar reposo. <Minutos>",
-  /* Shutdown timeout                   */ "Tiempo hasta apagado. <Minutos>",
-  /* Motion sensitivity level           */ "Sensibilidad del movimiento. <0=Apagado 1=El menos sensible 9=El más sensible>",
-  /* Temperature in F and C             */ "Unidad de temperatura.",
-  /* Advanced idle display mode enabled */ "Display detailed information in a smaller font on the idle screen.",
-  /* Display rotation mode              */ "Orientación de la pantalla <A=Automático I=Mano izquierda D=Mano derecha>",
-  /* Boost enabled                      */ "Activar el botón \"Boost\" en modo soldadura.",
-  /* Boost temperature                  */ "Temperatura en modo \"Boost\". <C>",
-  /* Automatic start mode               */ "Iniciar modo soldadura en el encendido. <V=Sí S=Modo reposo F=No>",
-  /* Cooldown blink                     */ "Parpadea la temperatura en el enfriamiento si la punta sigue caliente.",
-  /* Temperature calibration enter menu */ "Calibrate tip offset.",
-  /* Settings reset command             */ "Reset all settings",
-  /* Calibrate input voltage            */ "VIN Calibration. Buttons adjust, long press to exit",
-  /* Advanced soldering screen enabled  */ "Display detailed information while soldering",
-};
-
-const char* SettingsCalibrationWarning = "Please ensure the tip is at room temperature before continuing!";
-const char* SettingsResetWarning = "Are you sure to reset settings to default values?";
-const char* UVLOWarningString = "LOW VOLT";          // Fixed width 8 chars
-const char* SleepingSimpleString = "Zzzz";           // Must be <= 4 chars
-const char* SleepingAdvancedString = "Sleeping...";  // <=17 chars
-const char* WarningSimpleString = "HOT!";            // Must be <= 4 chars
-const char* WarningAdvancedString = "WARNING! TIP HOT!";
-
-const char SettingRightChar = 'R';
-const char SettingLeftChar = 'L';
-const char SettingAutoChar = 'A';
-
-const enum ShortNameType SettingsShortNameType = SHORT_NAME_SINGLE_LINE;
-const char* SettingsShortNames[16][2] = {
-  /* (<= 5) Power source (DC or batt)          */ {"PWRSC"},
-  /* (<= 4) Sleep temperature                  */ {"STMP"},
-  /* (<= 4) Sleep timeout                      */ {"STME"},
-  /* (<= 5) Shutdown timeout                   */ {"SHTME"},
-  /* (<= 6) Motion sensitivity level           */ {"MSENSE"},
-  /* (<= 6) Temperature in F and C             */ {"TMPUNT"},
-  /* (<= 6) Advanced idle display mode enabled */ {"ADVIDL"},
-  /* (<= 6) Display rotation mode              */ {"DSPROT"},
-  /* (<= 6) Boost enabled                      */ {"BOOST"},
-  /* (<= 4) Boost temperature                  */ {"BTMP"},
-  /* (<= 6) Automatic start mode               */ {"ASTART"},
-  /* (<= 6) Cooldown blink                     */ {"CLBLNK"},
-  /* (<= 8) Temperature calibration enter menu */ {"TMP CAL?"},
-  /* (<= 8) Settings reset command             */ {"RESET?"},
-  /* (<= 8) Calibrate input voltage            */ {"CAL VIN?"},
-  /* (<= 6) Advanced soldering screen enabled  */ {"ADVSLD"},
-};
-#endif
-
-#ifdef LANG_SE
-const char* SettingsLongNames[16] = {
-	// These are all the help text for all the settings.
-	// No requirements on spacing or length.
-	/* Power source (DC or batt)          */ "Источник питания. Установка напряжения отключения. <DC 10V> <S 3.3 V на батарею>",
-	/* Sleep temperature                  */ "Температура Сна  <С>",
-	/* Sleep timeout                      */ "Переход в режим Сна <Минуты>",
-	/* Shutdown timeout                   */ "Переходит в режим ожидания <Минуты>",
-	/* Motion sensitivity level           */ "Акселерометр <0. Выкл. 1. мин. чувствительный 9. макс. чувствительный>",
-	/* Temperature in F and C             */ "В чем измерять температуру",
-	/* Advanced idle display mode enabled */ "Display detailed information in a smaller font on the idle screen.",
-	/* Display rotation mode              */ "Ориентация Дисплея <A. Автоматический L. Левая Рука R. Правая Рука>",
-	/* Boost enabled                      */ "Активация  кнопки A для Турбо режима до  450С при пайке ",
-	/* Boost temperature                  */ "Установка температуры для Турбо режима",
-	/* Automatic start mode               */ "Автоматический запуск паяльника при включении питания. T=Нагрев, S= Режим Сна,F=Выкл.",
-	/* Cooldown blink                     */ "Мигает температура на экране охлаждения, пока жало остается горячим.",
-	/* Temperature calibration enter menu */ "Calibrate tip offset.",
-	/* Settings reset command             */ "Reset all settings",
-	/* Calibrate input voltage            */ "VIN Calibration. Buttons adjust, long press to exit",
-	/* Advanced soldering screen enabled  */ "Display detailed information while soldering",
-};
-
-const char* SettingsCalibrationWarning = "Please ensure the tip is at room temperature before continuing!";
-const char* SettingsResetWarning = "Are you sure to reset settings to default values?";
-const char* UVLOWarningString = "LOW VOLT";          // Fixed width 8 chars
-const char* SleepingSimpleString = "Zzzz";           // Must be <= 4 chars
-const char* SleepingAdvancedString = "Sleeping...";  // <=17 chars
-const char* WarningSimpleString = "HOT!";            // Must be <= 4 chars
-const char* WarningAdvancedString = "WARNING! TIP HOT!";
-
-const char SettingRightChar = 'R';
-const char SettingLeftChar = 'L';
-const char SettingAutoChar = 'A';
-
-const enum ShortNameType SettingsShortNameType = SHORT_NAME_SINGLE_LINE;
-const char* SettingsShortNames[16][2] = {
-  /* (<= 5) Power source (DC or batt)          */ {"PWRSC"},
-  /* (<= 4) Sleep temperature                  */ {"STMP"},
-  /* (<= 4) Sleep timeout                      */ {"STME"},
-  /* (<= 5) Shutdown timeout                   */ {"SHTME"},
-  /* (<= 6) Motion sensitivity level           */ {"MSENSE"},
-  /* (<= 6) Temperature in F and C             */ {"TMPUNT"},
-  /* (<= 6) Advanced idle display mode enabled */ {"ADVIDL"},
-  /* (<= 6) Display rotation mode              */ {"DSPROT"},
-  /* (<= 6) Boost enabled                      */ {"BOOST"},
-  /* (<= 4) Boost temperature                  */ {"BTMP"},
-  /* (<= 6) Automatic start mode               */ {"ASTART"},
-  /* (<= 6) Cooldown blink                     */ {"CLBLNK"},
-  /* (<= 8) Temperature calibration enter menu */ {"TMP CAL?"},
-  /* (<= 8) Settings reset command             */ {"RESET?"},
-  /* (<= 8) Calibrate input voltage            */ {"CAL VIN?"},
-  /* (<= 6) Advanced soldering screen enabled  */ {"ADVSLD"},
-};
-#endif
-
-#ifdef LANG_IT
-const char* SettingsLongNames[16] = {
-  // These are all the help text for all the settings.
-  // No requirements on spacing or length.
-  /* Power source (DC or batt)          */"Scegli la sorgente di alimentazione; imposta la soglia di scaricamento per alimentazione Li-Po <DC: 10V; S: 3.3V per cella>",
-  /* Sleep temperature                  */"Imposta temperatura in modalità standby <°C>",
-  /* Sleep timeout                      */"Imposta timer per entrare in modalità standby <minuti/secondi>",
-  /* Shutdown timeout                   */"Imposta timer per lo spegnimento <minuti>",
-  /* Motion sensitivity level           */"Imposta sensibilità al movimento per uscire dalla modalità standby <0: nessuna; 1: minima; 9: massima>",
-  /* Temperature in F and C             */"Scegli l'unità di misura per la temperatura <C: Celsius; F: Farenheit>",
-  /* Advanced idle display mode enabled */"Mostra informazioni dettagliate con un carattere più piccolo nella schermata principale",
-  /* Display rotation mode              */"Imposta orientamento del display <A: automatico; S: mano sinistra; D: mano destra>",
-  /* Boost enabled                      */"Il tasto anteriore attiva la funzione \"boost\" durante la saldatura",
-  /* Boost temperature                  */"Imposta la temperatura in funzione \"boost\"",
-  /* Automatic start mode               */"Attiva automaticamente il saldatore quando viene alimentato <A: saldatura; S: standby; D: disattiva>",
-  /* Cooldown blink                     */"Mostra la temperatura durante il raffreddamento se la punta è ancora calda",
-  /* Temperature calibration enter menu */"Calibra la differenza di temperatura rilevata da quella presente sulla punta",
-  /* Settings reset command             */"Ripristina tutte le impostazioni",
-  /* Calibrate input voltage            */"Calibra la tensione in ingresso; regola con i bottoni, tieni premuto per uscire",
-  /* Advanced soldering screen enabled  */"Mostra informazioni dettagliate in modalità saldatura",
-};
-
-const char* SettingsCalibrationWarning = "Assicurati che la punta si trovi a temperatura ambiente prima di continuare!";
-const char* SettingsResetWarning = "Ripristinare le impostazioni iniziali?";
-const char* UVLOWarningString = "LOW VOLT";      // Fixed width 8 chars
-const char* SleepingSimpleString = "Zzzz";       // Must be <= 4 chars
-const char* SleepingAdvancedString = "Standby";  // <=17 chars
-const char* WarningSimpleString = "HOT!";        // Must be <= 4 chars
-const char* WarningAdvancedString = "ATTENZIONE! PUNTA CALDA!";
-
-const char SettingRightChar = 'D';
-const char SettingLeftChar = 'S';
-const char SettingAutoChar = 'A';
-
-const enum ShortNameType SettingsShortNameType = SHORT_NAME_DOUBLE_LINE;
- const char* SettingsShortNames[16][2] = {
-    /* (<= 11) Power source (DC or batt)          */ {"Sorgente", "alimentaz"},
-    /* (<=  9) Sleep temperature                  */ {"Temp", "standby"},
-    /* (<=  9) Sleep timeout                      */ {"Timer", "standby"},
-    /* (<= 11) Shutdown timeout                   */ {"Timer", "spegnimento"},
-    /* (<= 13) Motion sensitivity level           */ {"Sensibilità", "al movimento"},
-    /* (<= 13) Temperature in F and C             */ {"Unità di", "temperatura"},
-    /* (<= 13) Advanced idle display mode enabled */ {"Mostra", "dettagli"},
-    /* (<= 13) Display rotation mode              */ {"Orientamento", "display"},
-    /* (<= 13) Boost enabled                      */ {"Funzione", "\"boost\""},
-    /* (<=  9) Boost temperature                  */ {"Temp", "\"boost\""},
-    /* (<= 13) Automatic start mode               */ {"Avvio", "automatico"},
-    /* (<= 13) Cooldown blink                     */ {"Avviso", "punta calda"},
-    /* (<= 16) Temperature calibration enter menu */ {"Calibrazione", "temperatura"},
-    /* (<= 16) Settings reset command             */ {"Ripristino", "impostazioni"},
-    /* (<= 16) Calibrate input voltage            */ {"Calibrazione", "tensione"},
-    /* (<= 13) Advanced soldering screen enabled  */ {"Dettagli", "saldatura"},
-};
-#endif
-
-#ifdef LANG_FR
-const char* SettingsLongNames[16] = {
-	// These are all the help text for all the settings.
-	// No requirements on spacing or length.
-	/* Power source (DC or batt)          */ "Source d'alimentation. Règle la tension de coupure <DC=10V S=3.3V par cellules>",
-	/* Sleep temperature                  */ "Température en veille <C>",
-	/* Sleep timeout                      */ "Délai avant mise en veille <Minutes>",
-	/* Shutdown timeout                   */ "Délai avant extinction <Minutes>",
-	/* Motion sensitivity level           */ "Sensibilité du capteur de mouvement <0=Inactif 1=Peu sensible 9=Tres sensible>",
-	/* Temperature in F and C             */ "Unité de température <C=Celsius F=Fahrenheit>",
-	/* Advanced idle display mode enabled */ "Afficher des informations détaillées lors de la veille",
-	/* Display rotation mode              */ "Orientation de l'affichage <A=Automatique G=Gaucher D=Droitier>",
-	/* Boost enabled                      */ "Activer le mode \"Boost\" en maintenant le bouton de devant pendant la soudure",
-	/* Boost temperature                  */ "Température du mode \"Boost\" <C>",
-	/* Automatic start mode               */ "Démarrer automatiquement la soudure à l'allumage",
-	/* Cooldown blink                     */ "Faire clignoter la température lors du refroidissement tant que la panne est chaude",
-	/* Temperature calibration enter menu */ "Étalonner la température de la panne",
-	/* Settings reset command             */ "Réinitialiser tous les réglages",
-	/* Calibrate input voltage            */ "Étalonner la tension d'entrée. Boutons pour ajuster, appui long pour quitter",
-	/* Advanced soldering screen enabled  */ "Afficher des informations détaillées pendant la soudure",
-};
-
-const char* SettingsCalibrationWarning = "Assurez-vous que la panne soit à température ambiante avant de continuer!";
-const char* SettingsResetWarning = "Voulez-vous vraiment réinitialiser les paramètres aux valeurs d'usine?";
-const char* UVLOWarningString = "LOW VOLT";             // Fixed width 8 chars
-const char* SleepingSimpleString = "Zzzz";              // Must be <= 4 chars
-const char* SleepingAdvancedString = "En veille...";    // <=17 chars
-const char* WarningSimpleString = "HOT!";               // Must be <= 4 chars
-const char* WarningAdvancedString = "ATTENTION! CHAUD"; // Must be <= 16 chars
-
-const char SettingRightChar = 'D';
-const char SettingLeftChar = 'G';
-const char SettingAutoChar = 'A';
-
-const enum ShortNameType SettingsShortNameType = SHORT_NAME_DOUBLE_LINE;
-const char* SettingsShortNames[16][2] = {
-	/* (<= 11) Power source (DC or batt)          */ {"Source", "d'alim"},
-	/* (<=  9) Sleep temperature                  */ {"Temp.", "veille"},
-	/* (<=  9) Sleep timeout                      */ {"Délai", "veille"},
-	/* (<= 11) Shutdown timeout                   */ {"Délai", "extinction"},
-	/* (<= 13) Motion sensitivity level           */ {"Sensibilité", "au mouvement"},
-	/* (<= 13) Temperature in F and C             */ {"Unité de", "température"},
-	/* (<= 13) Advanced idle display mode enabled */ {"Écran veille", "détaillé"},
-	/* (<= 13) Display rotation mode              */ {"Orientation", "de l'écran"},
-	/* (<= 13) Boost enabled                      */ {"Activation du", "mode Boost"},
-	/* (<=  9) Boost temperature                  */ {"Temp.", "Boost"},
-	/* (<= 13) Automatic start mode               */ {"Démarrage", "automatique"},
-	/* (<= 13) Cooldown blink                     */ {"Refroidir en", "clignottant"},
-	/* (<= 16) Temperature calibration enter menu */ {"Étalonner", "température"},
-	/* (<= 16) Settings reset command             */ {"Réinitialisation", "d'usine"},
-	/* (<= 16) Calibrate input voltage            */ {"Étalonner", "tension d'entrée"},
-	/* (<= 13) Advanced soldering screen enabled  */ {"Écran soudure", "détaillé"},
-};
-#endif
-
-#ifdef LANG_DE
-const char* SettingsLongNames[16] = {
-	// These are all the help text for all the settings.
-	// No requirements on spacing or length.
-	/* Power source (DC or batt)          */ "Spannungsquelle (Abschaltspannung) <DC=10V, nS=n*3.3V für n LiIon-Zellen>",
-	/* Sleep temperature                  */ "Ruhetemperatur (In der eingestellten Einheit)",
-	/* Sleep timeout                      */ "Ruhemodus nach <Sekunden/Minuten>",
-	/* Shutdown timeout                   */ "Abschaltzeit <Minuten>",
-	/* Motion sensitivity level           */ "Bewegungsempfindlichkeit <0=Aus, 1=Minimal ... 9=Maximal>",
-	/* Temperature in F and C             */ "Temperatureinheit <C=Celsius, F=Fahrenheit>",
-	/* Advanced idle display mode enabled */ "Detaillierte Anzeige im Ruhemodus <J=An, N=Aus>",
-	/* Display rotation mode              */ "Ausrichtung der Anzeige <A=Automatisch, L=Linkshändig, R=Rechtshändig>",
-	/* Boost enabled                      */ "Vordere Taste für Temperaturboost verwenden <J=An, N=Aus>",
-	/* Boost temperature                  */ "Temperatur im Boostmodus  (In der eingestellten Einheit)",
-	/* Automatic start mode               */ "Automatischer Start des Lötmodus beim Einschalten der Spannungsversorgung. <J=An, N=Aus>",
-	/* Cooldown blink                     */ "Blinkende Temperaturanzeige beim Abkühlen, solange heiß. <J=An, N=Aus>",
-	/* Temperature calibration enter menu */ "Kalibrierung der Lötspitzentemperatur",
-	/* Settings reset command             */ "Alle Einstellungen zurücksetzen",
-	/* Calibrate input voltage            */ "Kalibrierung der Eingangsspannung. Kurzer Tastendruck zum Einstellen, langer Tastendruck zum Verlassen.",
-	/* Advanced soldering screen enabled  */ "Detaillierte Anzeige im Lötmodus <J=An, N=Aus>",
-};
-
-const char* SettingsCalibrationWarning = "Vor dem Fortfahren muss die Lötspitze vollständig abgekühlt sein!";
-const char* SettingsResetWarning = "Are you sure to reset settings to default values?";
-const char* UVLOWarningString = "LOW VOLT";           // Fixed width 8 chars
-const char* SleepingSimpleString = "Zzz ";            // Must be <= 4 chars
-const char* SleepingAdvancedString = "Ruhemodus...";  // <=17 chars
-const char* WarningSimpleString = "HEIß";             // Must be <= 4 chars
-const char* WarningAdvancedString = "Achtung! Spitze Heiß!";
-
-const char SettingRightChar = 'R';
-const char SettingLeftChar = 'L';
-const char SettingAutoChar = 'A';
-
-const enum ShortNameType SettingsShortNameType = SHORT_NAME_DOUBLE_LINE;
-const char* SettingsShortNames[16][2] = {
-  /* (<= 11) Power source (DC or batt)          */ {"Spannungs-", "quelle"},
-  /* (<=  9) Sleep temperature                  */ {"Ruhetemp-", "eratur"},
-  /* (<=  9) Sleep timeout                      */ {"Ruhever-", "zoegerung"},
-  /* (<= 11) Shutdown timeout                   */ {"Abschalt-", "zeit"},
-  /* (<= 13) Motion sensitivity level           */ {"Bewegungs-", "empfindlichk."},
-  /* (<= 13) Temperature in F and C             */ {"Temperatur-", "einheit"},
-  /* (<= 13) Advanced idle display mode enabled */ {"Detaillierte", "Ruheansicht"},
-  /* (<= 13) Display rotation mode              */ {"Anzeige-", "ausrichtung"},
-  /* (<= 13) Boost enabled                      */ {"Boosttaste", "aktiv?"},
-  /* (<=  9) Boost temperature                  */ {"Boosttemp-", "eratur"},
-  /* (<= 13) Automatic start mode               */ {"Start im", "Loetmodus?"},
-  /* (<= 13) Cooldown blink                     */ {"Abkuehl-", "blinken?"},
-  /* (<= 16) Temperature calibration enter menu */ {"Temperatur", "kalibrieren?"},
-  /* (<= 16) Settings reset command             */ {"Einstellungen", "zuruecksetzen?"},
-  /* (<= 16) Calibrate input voltage            */ {"Eingangsspannung", "kalibrieren?"},
-  /* (<= 13) Advanced soldering screen enabled  */ {"Detaillierte", "Loetansicht"},
-};
-#endif
-
-#ifdef LANG_SK
-const char* SettingsLongNames[16] = {
-	// These are all the help text for all the settings.
-	// No requirements on spacing or length.
-	/* Power source (DC or batt)          */ "Zdroj napatia. Nastavit napatie pre vypnutie (cutoff)  <DC=10V, nS=n*3.3V pre LiIon clanky>",
-	/* Sleep temperature                  */ "Kludova teplota (v nastavenych jednotkach)",
-	/* Sleep timeout                      */ "Kludovy rezim po <sekundach/minutach>",
-	/* Shutdown timeout                   */ "Cas na vypnutie <minuty>",
-	/* Motion sensitivity level           */ "Citlivost detekcie pohybu <0=Vyp, 1=Min ... 9=Max>",
-	/* Temperature in F and C             */ "Jednotky merania teploty <C=stupne Celzia, F=stupne Fahrenheita>",
-	/* Advanced idle display mode enabled */ "Zobrazit detailne informacie v kludovom rezime <T=Zap, F=Vyp>",
-	/* Display rotation mode              */ "Orientacia displeja <A=Auto, L=Lavak, R=Pravak>",
-	/* Boost enabled                      */ "Povolit tlacidlo pre prudky nahrev <T=Zap, F=Vyp>",
-	/* Boost temperature                  */ "Cielova teplota pre prudky nahrev (v nastavenych jednotkach)",
-	/* Automatic start mode               */ "Pri starte spustit rezim spajkovania <T=Zap, F=Vyp, S=Spanok>",
-	/* Cooldown blink                     */ "Blikanie ukazovatela teploty pocas chladnutia hrotu <T=Zap, F=Vyp>",
-	/* Temperature calibration enter menu */ "Kalibracia posunu hrotu",
-	/* Settings reset command             */ "Tovarenske nastavenia",
-	/* Calibrate input voltage            */ "Kalibracia VIN. Kratke stlacenie meni nastavenie, dlhe stlacenie pre navrat",
-	/* Advanced soldering screen enabled  */ "Zobrazenie detailov pocas spajkovania <T=Zap, F=Vyp>",
-};
-
-const char* SettingsCalibrationWarning = "Najprv sa prosim uistite, ze hrot ma izbovu teplotu!";
-const char* SettingsResetWarning = "Are you sure to reset settings to default values?";
-const char* UVLOWarningString = "LOW VOLT";               // Fixed width 8 chars
-const char* SleepingSimpleString = "Chrr";                // Must be <= 4 chars
-const char* SleepingAdvancedString = "Kludovy rezim...";  // <=17 chars
-const char* WarningSimpleString = "HOT!";                 // Must be <= 4 chars
-const char* WarningAdvancedString = "Pozor! Hrot je horuci!";
-
-const char SettingRightChar = 'R';
-const char SettingLeftChar = 'L';
-const char SettingAutoChar = 'A';
-
-const enum ShortNameType SettingsShortNameType = SHORT_NAME_SINGLE_LINE;
-const char* SettingsShortNames[16][2] = {
-  /* (<= 5) Power source (DC or batt)          */ {"PWRSC"},
-  /* (<= 4) Sleep temperature                  */ {"STMP"},
-  /* (<= 4) Sleep timeout                      */ {"STME"},
-  /* (<= 5) Shutdown timeout                   */ {"SHTME"},
-  /* (<= 6) Motion sensitivity level           */ {"MSENSE"},
-  /* (<= 6) Temperature in F and C             */ {"TMPUNT"},
-  /* (<= 6) Advanced idle display mode enabled */ {"ADVIDL"},
-  /* (<= 6) Display rotation mode              */ {"DSPROT"},
-  /* (<= 6) Boost enabled                      */ {"BOOST"},
-  /* (<= 4) Boost temperature                  */ {"BTMP"},
-  /* (<= 6) Automatic start mode               */ {"ASTART"},
-  /* (<= 6) Cooldown blink                     */ {"CLBLNK"},
-  /* (<= 8) Temperature calibration enter menu */ {"TMP CAL?"},
-  /* (<= 8) Settings reset command             */ {"RESET?"},
-  /* (<= 8) Calibrate input voltage            */ {"CAL VIN?"},
-  /* (<= 6) Advanced soldering screen enabled  */ {"ADVSLD"},
-};
-#endif
-
-#ifdef LANG_TR
-const char* SettingsLongNames[16] = {
-	// These are all the help text for all the settings.
-	// No requirements on spacing or length.
-	/* Power source (DC or batt)          */ "Güç Kaynağı. kesim geriliminı ayarlar. <DC 10V> <S 3.3V hücre başına>",
-	/* Sleep temperature                  */ "Uyku Sıcaklığı <C>",
-	/* Sleep timeout                      */ "Uyku Zaman Aşımı <Dakika/Saniye>",
-	/* Shutdown timeout                   */ "Kapatma Zaman Aşımı <Dakika>",
-	/* Motion sensitivity level           */ "Hareket Hassasiyeti <0.Kapalı 1.En az duyarlı 9.En duyarlı>",
-	/* Temperature in F and C             */ "Sıcaklık Ünitesi <C=Celsius F=Fahrenheit>",
-	/* Advanced idle display mode enabled */ "Boş ekranda ayrıntılı bilgileri daha küçük bir yazı tipi ile göster.",
-	/* Display rotation mode              */ "Görüntü Yönlendirme <A. Otomatik L. Solak R. Sağlak>",
-	/* Boost enabled                      */ "Lehimleme yaparken ön tuşa basmak Boost moduna sokar(450C)",
-	/* Boost temperature                  */ "\"boost\" Modu Derecesi",
-	/* Automatic start mode               */ "Güç verildiğinde otomatik olarak lehimleme modunda başlat. T=Lehimleme Modu, S= Uyku Modu,F=Kapalı",
-	/* Cooldown blink                     */ "Soğutma ekranında uç hala sıcakken derece yanıp sönsün.",
-	/* Temperature calibration enter menu */ "Ucu kalibre et.",
-	/* Settings reset command             */ "Bütün ayarları sıfırla",
-	/* Calibrate input voltage            */ "VIN Kalibrasyonu. Düğmeler ayarlar, çıkmak için uzun bas.",
-	/* Advanced soldering screen enabled  */ "Lehimleme yaparken detaylı bilgi göster",
-};
-
-const char* SettingsCalibrationWarning = "Lütfen devam etmeden önce ucun oda sıcaklığında olduğunu garantiye alın!";
-const char* SettingsResetWarning = "Are you sure to reset settings to default values?";
-const char* UVLOWarningString = "LOW VOLT";        // Fixed width 8 chars
-const char* SleepingSimpleString = "Zzzz";         // Must be <= 4 chars
-const char* SleepingAdvancedString = "Uyuyor...";  // <=17 chars
-const char* WarningSimpleString = "HOT!";          // Must be <= 4 chars
-const char* WarningAdvancedString = "UYARI! UÇ SICAK!";
-
-const char SettingRightChar = 'R';
-const char SettingLeftChar = 'L';
-const char SettingAutoChar = 'A';
-
-const enum ShortNameType SettingsShortNameType = SHORT_NAME_SINGLE_LINE;
-const char* SettingsShortNames[16][2] = {
-  /* (<= 5) Power source (DC or batt)          */ {"PWRSC"},
-  /* (<= 4) Sleep temperature                  */ {"STMP"},
-  /* (<= 4) Sleep timeout                      */ {"STME"},
-  /* (<= 5) Shutdown timeout                   */ {"SHTME"},
-  /* (<= 6) Motion sensitivity level           */ {"MSENSE"},
-  /* (<= 6) Temperature in F and C             */ {"TMPUNT"},
-  /* (<= 6) Advanced idle display mode enabled */ {"ADVIDL"},
-  /* (<= 6) Display rotation mode              */ {"DSPROT"},
-  /* (<= 6) Boost enabled                      */ {"BOOST"},
-  /* (<= 4) Boost temperature                  */ {"BTMP"},
-  /* (<= 6) Automatic start mode               */ {"ASTART"},
-  /* (<= 6) Cooldown blink                     */ {"CLBLNK"},
-  /* (<= 8) Temperature calibration enter menu */ {"TMP CAL?"},
-  /* (<= 8) Settings reset command             */ {"RESET?"},
-  /* (<= 8) Calibrate input voltage            */ {"CAL VIN?"},
-  /* (<= 6) Advanced soldering screen enabled  */ {"ADVSLD"},
-};
-#endif
-
-#ifdef LANG_HR
-const char* SettingsLongNames[16] = {
-	// These are all the help text for all the settings.
-	// No requirements on spacing or length.
-	/* Power source (DC or batt)          */ "Izvor napajanja. Postavlja napon isključivanja. <DC 10V> <S 3.3V po ćeliji>",
-	/* Sleep temperature                  */ "Temperatura spavanja. <C>",
-	/* Sleep timeout                      */ "Vrijeme spavanja. <Minute/Sekunde>",
-	/* Shutdown timeout                   */ "Vrijeme gašenja. <Minutes>",
-	/* Motion sensitivity level           */ "Osjetljivost prepoznavanja pokreta. <0=Ugašeno, 1=Najmanje osjetljivo, 9=Najosjetljivije>",
-	/* Temperature in F and C             */ "Jedinica temperature. <C=Celzij, F=Fahrenheit>",
-	/* Advanced idle display mode enabled */ "Prikazivanje detaljnih informacija manjim fontom tijekom čekanja.",
-	/* Display rotation mode              */ "Orijentacija ekrana. <A=Automatski, L=Ljevoruki, D=Desnoruki>",
-	/* Boost enabled                      */ "Držanjem prednjeg gumba prilikom lemljenja aktivira se pojačani (Boost) način.",
-	/* Boost temperature                  */ "Temperatura u pojačanom (Boost) načinu.",
-	/* Automatic start mode               */ "Početno stanje lemilice po uključivanju napajanja. <+=Lemljenje, S=Spavanje, -=Ugašeno>",
-	/* Cooldown blink                     */ "Bljeskanje temperature prilikom hlađenja, ako je lemilica vruća.",
-	/* Temperature calibration enter menu */ "Kalibriranje temperature mjeri razliku temperature vška i temperature drške, dok je lemilica hladna.",
-	/* Settings reset command             */ "Vraćanje svih postavki.",
-	/* Calibrate input voltage            */ "Kalibracija ulaznog napona. Podešavanje gumbima, dugački pritisak za kraj.",
-	/* Advanced soldering screen enabled  */ "Prikazivanje detaljnih informacija tijekom lemljenja.",
-};
-
-const char* SettingsCalibrationWarning = "Provjerite da je vršak ohlađen na sobnu temperaturu prije nego što nastavite!";
-const char* SettingsResetWarning = "Are you sure to reset settings to default values?";
-const char* UVLOWarningString = "NAPON!!!";          // Fixed width 8 chars
-const char* SleepingSimpleString = "Zzzz";           // Must be <= 4 chars
-const char* SleepingAdvancedString = "Spavanje...";  // <=17 chars
-const char* WarningSimpleString = "VRUĆ";            // Must be <= 4 chars
-const char* WarningAdvancedString = "OPREZ! Vršak je vruć!";
-
-const char SettingRightChar = 'D';
-const char SettingLeftChar = 'L';
-const char SettingAutoChar = 'A';
-
-const enum ShortNameType SettingsShortNameType = SHORT_NAME_SINGLE_LINE;
-const char* SettingsShortNames[16][2] = {
-  /* (<= 5) Power source (DC or batt)          */ {"PWRSC"},
-  /* (<= 4) Sleep temperature                  */ {"STMP"},
-  /* (<= 4) Sleep timeout                      */ {"STME"},
-  /* (<= 5) Shutdown timeout                   */ {"SHTME"},
-  /* (<= 6) Motion sensitivity level           */ {"MSENSE"},
-  /* (<= 6) Temperature in F and C             */ {"TMPUNT"},
-  /* (<= 6) Advanced idle display mode enabled */ {"ADVIDL"},
-  /* (<= 6) Display rotation mode              */ {"DSPROT"},
-  /* (<= 6) Boost enabled                      */ {"BOOST"},
-  /* (<= 4) Boost temperature                  */ {"BTMP"},
-  /* (<= 6) Automatic start mode               */ {"ASTART"},
-  /* (<= 6) Cooldown blink                     */ {"CLBLNK"},
-  /* (<= 8) Temperature calibration enter menu */ {"TMP CAL?"},
-  /* (<= 8) Settings reset command             */ {"RESET?"},
-  /* (<= 8) Calibrate input voltage            */ {"CAL VIN?"},
-  /* (<= 6) Advanced soldering screen enabled  */ {"ADVSLD"},
-};
-#endif
-
-#ifdef LANG_CS_CZ
-const char* SettingsLongNames[16] = {
-  // These are all the help text for all the settings.
-  // No requirements on spacing or length
-  /* Power source (DC or batt)          */ "Pri nizsim napeti se odpoji <DC=10V, xS=x*3.3V pro LiPo,LiIon...>",
-  /* Sleep temperature                  */ "Teplota v rezimu spanku",
-  /* Sleep timeout                      */ "Cas do rezimu spanku <Minut/Sekund>",
-  /* Shutdown timeout                   */ "Cas do automatickeho vypnuti <Minut>",
-  /* Motion sensitivity level           */ "Citlivost detekce pohybu <0=Vyp, 1=Min, ... 9=Max>",
-  /* Temperature in F and C             */ "Jednotky mereni teploty <C=Celsius, F=Fahrenheit>",
-  /* Advanced idle display mode enabled */ "Zobrazit podrobnosti na vychozi obrazovce <Z=Zap, V=Vyp>",
-  /* Display rotation mode              */ "Orientace obrazovky <A=Auto, L=Levak, P=Pravak>",
-  /* Boost enabled                      */ "Povolit boost drzenim leveho tlacitka pri pajeni <Z=Zap, V=Vyp>",
-  /* Boost temperature                  */ "Teplota v rezimu boost",
-  /* Automatic start mode               */ "Pri startu ihned nahrivat hrot <Z=Zap, V=Vyp, S=Rezim spanku>",
-  /* Cooldown blink                     */ "Blikani teploty pri chladnuti, dokud je hrot horky <Z=Zap, V=Vyp>",
-  /* Temperature calibration enter menu */ "Kalibrovat mereni teploty",
-  /* Settings reset command             */ "Obnovit tovarni nastaveni",
-  /* Calibrate input voltage            */ "Kalibrovat vstupni napeti. Tlacitky upravte, podrzenim potvrdte.",
-  /* Advanced soldering screen enabled  */ "Zobrazit podrobnosti pri pajeni <Z=Zap, V=Vyp>",
-};
-
-const char* SettingsCalibrationWarning = "Ujistete se, ze hrot ma pokojovou teplotu! ";          // ending space needed
-const char* SettingsResetWarning = "Opravdu chcete resetovat zarizeni do tovarniho nastaveni?";
-const char* UVLOWarningString = "LOW VOLT";              // Fixed width 8 chars
-const char* SleepingSimpleString = "Zzz ";               // Must be <= 4 chars
-const char* SleepingAdvancedString = "Rezim spanku...";  // <=17 chars
-const char* WarningSimpleString = "HOT!";                // Must be <= 4 chars
-const char* WarningAdvancedString = "!! HORKY HROT !!";  // <= 16 chars
-
-const char SettingRightChar = 'P';
-const char SettingLeftChar = 'L';
-const char SettingAutoChar = 'A';
-
-const enum ShortNameType SettingsShortNameType = SHORT_NAME_DOUBLE_LINE;
-const char* SettingsShortNames[16][2] = {
-  /* (<= 11) Power source (DC or batt)          */ {"Zdroj", "napajeni"},
-  /* (<=  9) Sleep temperature                  */ {"Teplota v", "r. spanku"},
-  /* (<=  9) Sleep timeout                      */ {"Cas do", "r. spanku"},
-  /* (<= 11) Shutdown timeout                   */ {"Cas do", "vypnuti"},
-  /* (<= 13) Motion sensitivity level           */ {"Citlivost", "det. pohybu"},
-  /* (<= 13) Temperature in F and C             */ {"Jednotky", "teploty"},
-  /* (<= 13) Advanced idle display mode enabled */ {"Podrobnosti", "na vych. obr."},
-  /* (<= 13) Display rotation mode              */ {"Orientace", "obrazovky"},
-  /* (<= 13) Boost enabled                      */ {"Povolit", "boost"},
-  /* (<=  9) Boost temperature                  */ {"Teplota v", "r. boost"},
-  /* (<= 13) Automatic start mode               */ {"Auto", "start"},
-  /* (<= 13) Cooldown blink                     */ {"Blikani pri", "chladnuti"},
-  /* (<= 16) Temperature calibration enter menu */ {"Kalibrovat", "teplotu?"},
-  /* (<= 16) Settings reset command             */ {"Tovarni", "nastaveni?"},
-  /* (<= 16) Calibrate input voltage            */ {"Kalibrovat", "vstupni napeti?"},
-  /* (<= 13) Advanced soldering screen enabled  */ {"Podrobnosti", "pri pajeni"},
-};
-#endif
-
-#ifdef LANG_HUN
-const char* SettingsLongNames[16] = {
-  // These are all the help text for all the settings.
-  // No requirements on spacing or length
-  /* Power source (DC or batt)          */ "Áramforrás. Beállítja a lekapcsolási feszültséget. <DC 10V> <S 3.3V cellánként>",
-  /* Sleep temperature                  */ "Alvási hőmérséklet <C>",
-  /* Sleep timeout                      */ "Elalvási időzítő <Perc/Másodperc>",
-  /* Shutdown timeout                   */ "Kikapcsolási időzítő <Minutes>",
-  /* Motion sensitivity level           */ "Mozgás érzékenység beállítása. <0.Ki 1.kevésbé érzékeny 9.legérzékenyebb>",
-  /* Temperature in F and C             */ "Hőmérsékleti egység <C=Celsius F=Fahrenheit>",
-  /* Advanced idle display mode enabled */ "Részletes információ megjelenítése kisebb betűméretben a készenléti képernyőn.",
-  /* Display rotation mode              */ "Megjelenítési tájolás <A. Automatikus L. Balkezes R. Jobbkezes>",
-  /* Boost enabled                      */ "Elülső gombbal lépjen boost módba, 450C forrasztás közben",
-  /* Boost temperature                  */ "Hőmérséklet \"boost\" módban",
-  /* Automatic start mode               */ "Bekapcsolás után automatikusan lépjen forrasztás módba. T=Forrasztás, S=Alvó mód,F=Ki",
-  /* Cooldown blink                     */ "Villogjon a hőmérséklet hűlés közben, amíg a hegy forró.",
-  /* Temperature calibration enter menu */ "Hegy hőmérsékletének kalibrálása",
-  /* Settings reset command             */ "Beállítások alaphelyzetbe állítása",
-  /* Calibrate input voltage            */ "A bemeneti feszültség kalibrálása. Röviden megnyomva állítsa be, hosszan nyomja meg a kilépéshez.",
-  /* Advanced soldering screen enabled  */ "Részletes információk megjelenítése forrasztás közben",
-};
-
-const char* SettingsCalibrationWarning = "Folytatás előtt győződj meg róla, hogy a hegy szobahőmérsékletű!";
-const char* SettingsResetWarning = "Are you sure to reset settings to default values?";
-const char* UVLOWarningString = "LOW VOLT";       // Fixed width 8 chars
-const char* SleepingSimpleString = "Zzzz";        // Must be <= 4 chars
-const char* SleepingAdvancedString = "Alvás...";  // <=17 chars
-const char* WarningSimpleString = "HOT!";         // Must be <= 4 chars
-const char* WarningAdvancedString = "FIGYELEM! FORRÓ HEGY!";
-
-const char SettingRightChar = 'R';
-const char SettingLeftChar = 'L';
-const char SettingAutoChar = 'A';
-
-const enum ShortNameType SettingsShortNameType = SHORT_NAME_SINGLE_LINE;
-const char* SettingsShortNames[16][2] = {
-  /* (<= 5) Power source (DC or batt)          */ {"PWRSC"},
-  /* (<= 4) Sleep temperature                  */ {"STMP"},
-  /* (<= 4) Sleep timeout                      */ {"STME"},
-  /* (<= 5) Shutdown timeout                   */ {"SHTME"},
-  /* (<= 6) Motion sensitivity level           */ {"MSENSE"},
-  /* (<= 6) Temperature in F and C             */ {"TMPUNT"},
-  /* (<= 6) Advanced idle display mode enabled */ {"ADVIDL"},
-  /* (<= 6) Display rotation mode              */ {"DSPROT"},
-  /* (<= 6) Boost enabled                      */ {"BOOST"},
-  /* (<= 4) Boost temperature                  */ {"BTMP"},
-  /* (<= 6) Automatic start mode               */ {"ASTART"},
-  /* (<= 6) Cooldown blink                     */ {"CLBLNK"},
-  /* (<= 8) Temperature calibration enter menu */ {"TMP CAL?"},
-  /* (<= 8) Settings reset command             */ {"RESET?"},
-  /* (<= 8) Calibrate input voltage            */ {"CAL VIN?"},
-  /* (<= 6) Advanced soldering screen enabled  */ {"ADVSLD"},
-};
-#endif
-
-#ifdef LANG_DK
-const char* SettingsLongNames[16] = {
-  // These are all the help text for all the settings.
-  // No requirements on spacing or length
-  /* Power source (DC or batt)          */ "Strømforsyning. Indstil Cutoff Spændingen. <DC 10V <S 3.3V per cell",
-  /* Sleep temperature                  */ "Dvale Temperatur <C",
-  /* Sleep timeout                      */ "Dvale Timeout <Minutter/Sekunder",
-  /* Shutdown timeout                   */ "sluknings Timeout <Minutter",
-  /* Motion sensitivity level           */ "Bevægelsesfølsomhed <0.Slukket 1.Mindst følsom 9.Mest følsom",
-  /* Temperature in F and C             */ "Temperatur Enhed <C=Celsius F=Fahrenheit",
-  /* Advanced idle display mode enabled */ "Vis detialieret information med en mindre skriftstørrelse på standby skærmen.",
-  /* Display rotation mode              */ "Skærm Orientering <A. Automatisk V. Venstre Håndet H. Højre Håndet",
-  /* Boost enabled                      */ "Ved tryk på front knap Aktiveres boost-funktionen, 450C tilstand når der loddes",
-  /* Boost temperature                  */ "Temperatur i \"boost\" mode",
-  /* Automatic start mode               */ "Start automatisk med lodning når strøm sættes til. L=Lodning, D= Dvale tilstand,S=Slukket",
-  /* Cooldown blink                     */ "Blink temperaturen på skærmen, mens spidsen stadig er varm.",
-  /* Temperature calibration enter menu */ "kalibrere spids temperatur.",
-  /* Settings reset command             */ "Gendan alle indstillinger",
-  /* Calibrate input voltage            */ "VIN kalibrering. Knapperne justere, Lang tryk for at gå ud",
-  /* Advanced soldering screen enabled  */ "Vis detialieret information mens der loddes",
-};
-
-const char* SettingsCalibrationWarning = "Sørg for at loddespidsen er ved stuetemperatur, inden du fortsætter!";
-const char* SettingsResetWarning = "Are you sure to reset settings to default values?";
-const char* UVLOWarningString = "Lav Volt";       // Fixed width 8 chars
-const char* SleepingSimpleString = "Zzzz";        // Must be <= 4 chars
-const char* SleepingAdvancedString = "Dvale...";  // <=17 chars
-const char* WarningSimpleString = "Varm";         // Must be <= 4 chars
-const char* WarningAdvancedString = "ADVARSEL! VARM LODDESPIDS!";
-
-const char SettingRightChar = 'H';
-const char SettingLeftChar = 'V';
-const char SettingAutoChar = 'A';
-
-const enum ShortNameType SettingsShortNameType = SHORT_NAME_SINGLE_LINE;
-const char* SettingsShortNames[16][2] = {
-  /* (<= 5) Power source (DC or batt)          */ {"PWRSC"},
-  /* (<= 4) Sleep temperature                  */ {"STMP"},
-  /* (<= 4) Sleep timeout                      */ {"STME"},
-  /* (<= 5) Shutdown timeout                   */ {"SHTME"},
-  /* (<= 6) Motion sensitivity level           */ {"MSENSE"},
-  /* (<= 6) Temperature in F and C             */ {"TMPUNT"},
-  /* (<= 6) Advanced idle display mode enabled */ {"ADVIDL"},
-  /* (<= 6) Display rotation mode              */ {"DSPROT"},
-  /* (<= 6) Boost enabled                      */ {"BOOST"},
-  /* (<= 4) Boost temperature                  */ {"BTMP"},
-  /* (<= 6) Automatic start mode               */ {"ASTART"},
-  /* (<= 6) Cooldown blink                     */ {"CLBLNK"},
-  /* (<= 8) Temperature calibration enter menu */ {"TMP CAL?"},
-  /* (<= 8) Settings reset command             */ {"RESET?"},
-  /* (<= 8) Calibrate input voltage            */ {"CAL VIN?"},
-  /* (<= 6) Advanced soldering screen enabled  */ {"ADVSLD"},
-};
-#endif
-
-#ifdef LANG_PL
-const char* SettingsLongNames[16] = {
-    // These are all the help text for all the settings.
-    // No requirements on spacing or length
-    /* Power source (DC or batt)          */ "Źródło zasilania. Ustaw napięcie odcięcia. <DC 10V> <S 3.3V dla ogniw Li>",
-    /* Sleep temperature                  */ "Temperatura uśpienia <°C>",
-    /* Sleep timeout                      */ "Czas uśpienia <Minuty/Sekundy>",
-    /* Shutdown timeout                   */ "Czas wyłączenia <Minuty>",
-    /* Motion sensitivity level           */ "Czułość ruchu <0.Wyłączona 1.minimalna 9.maksymalna>",
-    /* Temperature in F and C             */ "Jednostka temperatury <C=Celsius F=Fahrenheit>",
-    /* Advanced idle display mode enabled */ "Wyświetla szczegółowe informacje za pomocą mniejszej czcionki na ekranie bezczynnośći <T = wł., N = wył.>",
-    /* Display rotation mode              */ "Orientacja wyświetlacza <A. Automatyczna L. Leworęczna P. Praworęczna>",
-    /* Boost enabled                      */ "Użyj przycisku przedniego w celu zwiększenia temperatury <T = wł., N = wył.>",
-    /* Boost temperature                  */ "Temperatura w trybie \"boost\" ",
-    /* Automatic start mode               */ "Automatyczne uruchamianie trybu lutowania po włączeniu zasilania. T=Lutowanie, S= Tryb Uspienia ,N=Wyłącz",
-    /* Cooldown blink                     */ "Temperatura na ekranie miga, gdy grot jest jeszcze gorący. <T = wł., N = wył.>",
-    /* Temperature calibration enter menu */ "Kalibracja temperatury grota lutownicy",
-    /* Settings reset command             */ "Zresetuj wszystkie ustawienia",
-    /* Calibrate input voltage            */ "Kalibracja napięcia wejściowego. Krótkie naciśnięcie, aby ustawić, długie naciśnięcie, aby wyjść.",
-    /* Advanced soldering screen enabled  */ "Wyświetl szczegółowe informacje podczas lutowania <T = wł., N = wył.>",
-};
-
-const char* SettingsCalibrationWarning = "Przed kontynuowaniem upewnij się, że końcówka osiągnela temperature pokojowa!";
-const char* SettingsResetWarning = "Are you sure to reset settings to default values?";
-const char* UVLOWarningString = "LOW VOLT";          // Fixed width 8 chars
-const char* SleepingSimpleString = "Zzz!";           // Must be <= 4 chars
-const char* SleepingAdvancedString = "Uspienie...";  // <=17 chars
-const char* WarningSimpleString = "HOT!";            // Must be <= 4 chars
-const char* WarningAdvancedString = "UWAGA! GORĄCA KOŃCÓWKA!";
-
-const char SettingRightChar = 'P';
-const char SettingLeftChar = 'L';
-const char SettingAutoChar = 'A';
-
-const enum ShortNameType SettingsShortNameType = SHORT_NAME_SINGLE_LINE;
-const char* SettingsShortNames[16][2] = {
-  /* (<= 5) Power source (DC or batt)          */ {"PWRSC"},
-  /* (<= 4) Sleep temperature                  */ {"STMP"},
-  /* (<= 4) Sleep timeout                      */ {"STME"},
-  /* (<= 5) Shutdown timeout                   */ {"SHTME"},
-  /* (<= 6) Motion sensitivity level           */ {"MSENSE"},
-  /* (<= 6) Temperature in F and C             */ {"TMPUNT"},
-  /* (<= 6) Advanced idle display mode enabled */ {"ADVIDL"},
-  /* (<= 6) Display rotation mode              */ {"DSPROT"},
-  /* (<= 6) Boost enabled                      */ {"BOOST"},
-  /* (<= 4) Boost temperature                  */ {"BTMP"},
-  /* (<= 6) Automatic start mode               */ {"ASTART"},
-  /* (<= 6) Cooldown blink                     */ {"CLBLNK"},
-  /* (<= 8) Temperature calibration enter menu */ {"TMP CAL?"},
-  /* (<= 8) Settings reset command             */ {"RESET?"},
-  /* (<= 8) Calibrate input voltage            */ {"CAL VIN?"},
-  /* (<= 6) Advanced soldering screen enabled  */ {"ADVSLD"},
-};
-#endif

workspace/TS100/src/gui.cpp

@@ -5,11 +5,14 @@
  *      Author: Ben V. Brown
  */
 
-#include "gui.h"
+#include "gui.hpp"
+#include "main.hpp"
 #include "cmsis_os.h"
-#include "hardware.h"
-#include "string.h"
+#include "Translation.h"
 
+#include "string.h"
+extern uint32_t lastButtonTime;
+void gui_Menu(const menuitem* menu);
 static void settings_setInputVRange(void);
 static void settings_displayInputVRange(void);
 static void settings_setSleepTemp(void);
@@ -26,6 +29,8 @@ static void settings_setAdvancedSolderingScreens(void);
 static void settings_displayAdvancedSolderingScreens(void);
 static void settings_setAdvancedIDLEScreens(void);
 static void settings_displayAdvancedIDLEScreens(void);
+static void settings_setScrollSpeed(void);
+static void settings_displayScrollSpeed(void);
 
 static void settings_setDisplayRotation(void);
 static void settings_displayDisplayRotation(void);
@@ -44,71 +49,153 @@ static void settings_displayCalibrate(void);
 static void settings_setCalibrateVIN(void);
 static void settings_displayCalibrateVIN(void);
 
-const menuitem settingsMenu[] = {
-    /*Struct used for all settings options in the settings menu*/
-    {(const char*)SettingsLongNames[0],
-     {settings_setInputVRange},
-     {settings_displayInputVRange}}, /*Voltage input*/
-    {(const char*)SettingsLongNames[1],
-     {settings_setSleepTemp},
-     {settings_displaySleepTemp}}, /*Sleep Temp*/
-    {(const char*)SettingsLongNames[2],
-     {settings_setSleepTime},
-     {settings_displaySleepTime}}, /*Sleep Time*/
-    {(const char*)SettingsLongNames[3],
-     {settings_setShutdownTime},
-     {settings_displayShutdownTime}}, /*Shutdown Time*/
-    {(const char*)SettingsLongNames[4],
-     {settings_setSensitivity},
-     {settings_displaySensitivity}}, /* Motion Sensitivity*/
-    {(const char*)SettingsLongNames[5],
-     {settings_setTempF},
-     {settings_displayTempF}}, /* Motion Sensitivity*/
-    {(const char*)SettingsLongNames[6],
-     {settings_setAdvancedIDLEScreens},
-     {settings_displayAdvancedIDLEScreens}}, /* Advanced screens*/
-    {(const char*)SettingsLongNames[15],
-     {settings_setAdvancedSolderingScreens},
-     {settings_displayAdvancedSolderingScreens}}, /* Advanced screens*/
-    {(const char*)SettingsLongNames[7],
-     {settings_setDisplayRotation},
-     {settings_displayDisplayRotation}}, /*Display Rotation*/
-    {(const char*)SettingsLongNames[8],
-     {settings_setBoostModeEnabled},
-     {settings_displayBoostModeEnabled}}, /*Enable Boost*/
-    {(const char*)SettingsLongNames[9],
-     {settings_setBoostTemp},
-     {settings_displayBoostTemp}}, /*Boost Temp*/
-    {(const char*)SettingsLongNames[10],
-     {settings_setAutomaticStartMode},
-     {settings_displayAutomaticStartMode}}, /*Auto start*/
-    {(const char*)SettingsLongNames[11],
-     {settings_setCoolingBlinkEnabled},
-     {settings_displayCoolingBlinkEnabled}}, /*Cooling blink warning*/
-    {(const char*)SettingsLongNames[12],
-     {settings_setCalibrate},
-     {settings_displayCalibrate}}, /*Calibrate tip*/
-    {(const char*)SettingsLongNames[13],
-     {settings_setResetSettings},
-     {settings_displayResetSettings}}, /*Resets settings*/
-    {(const char*)SettingsLongNames[14],
-     {settings_setCalibrateVIN},
-     {settings_displayCalibrateVIN}}, /*Voltage input cal*/
-    {NULL, {NULL}, {NULL}}            // end of menu marker. DO NOT REMOVE
+//Menu functions
+static void settings_displaySolderingMenu(void);
+static void settings_enterSolderingMenu(void);
+static void settings_displayPowerMenu(void);
+static void settings_enterPowerMenu(void);
+static void settings_displayUIMenu(void);
+static void settings_enterUIMenu(void);
+static void settings_displayAdvancedMenu(void);
+static void settings_enterAdvancedMenu(void);
+/*
+ * Root Settings Menu
+ *
+ * Power Source
+ * Soldering
+ * 	Boost Mode Enabled
+ * 	Boost Mode Temp
+ * 	Auto Start
+ *
+ * Power Saving
+ * 	Sleep Temp
+ * 	Sleep Time
+ * 	Shutdown Time
+ * 	Motion Sensitivity
+ *
+ * UI
+ *  // Language
+ *  Scrolling Speed
+ *  Temperature Unit
+ *  Display orientation
+ *  Cooldown blink
+ *
+ * Advanced
+ *  Detailed IDLE
+ *  Detailed Soldering
+ *  Logo Time
+ *  Calibrate Temperature
+ *  Calibrate Input V
+ *  Reset Settings
+ *
+ */
+const menuitem rootSettingsMenu[] {
+/*
+ * Power Source
+ * Soldering Menu
+ * Power Saving Menu
+ * UI Menu
+ * Advanced Menu
+ * Exit
+ */
+{ (const char*) SettingsDescriptions[0], { settings_setInputVRange }, {
+		settings_displayInputVRange } }, /*Voltage input*/
+{ (const char*) SettingsMenuEntriesDescriptions[0], {
+		settings_enterSolderingMenu }, { settings_displaySolderingMenu } }, /*Soldering*/
+{ (const char*) SettingsMenuEntriesDescriptions[1], { settings_enterPowerMenu },
+		{ settings_displayPowerMenu } }, /*Sleep Options Menu*/
+{ (const char*) SettingsMenuEntriesDescriptions[2], { settings_enterUIMenu }, {
+		settings_displayUIMenu } }, /*UI Menu*/
+{ (const char*) SettingsMenuEntriesDescriptions[3],
+		{ settings_enterAdvancedMenu }, { settings_displayAdvancedMenu } }, /*Advanced Menu*/
+{ NULL, { NULL }, { NULL } }            // end of menu marker. DO NOT REMOVE
+};
+
+const menuitem solderingMenu[] = {
+/*
+ * Boost Mode Enabled
+ * 	Boost Mode Temp
+ * 	Auto Start
+ */
+{ (const char*) SettingsDescriptions[8], { settings_setBoostModeEnabled }, {
+		settings_displayBoostModeEnabled } }, /*Enable Boost*/
+{ (const char*) SettingsDescriptions[9], { settings_setBoostTemp }, {
+		settings_displayBoostTemp } }, /*Boost Temp*/
+{ (const char*) SettingsDescriptions[10], { settings_setAutomaticStartMode }, {
+		settings_displayAutomaticStartMode } }, /*Auto start*/
+{ NULL, { NULL }, { NULL } }            // end of menu marker. DO NOT REMOVE
+};
+const menuitem UIMenu[] = {
+/*
+ // Language
+ *  Scrolling Speed
+ *  Temperature Unit
+ *  Display orientation
+ *  Cooldown blink
+ */
+{ (const char*) SettingsDescriptions[5], { settings_setTempF }, {
+		settings_displayTempF } }, /* Temperature units*/
+{ (const char*) SettingsDescriptions[7], { settings_setDisplayRotation }, {
+		settings_displayDisplayRotation } }, /*Display Rotation*/
+{ (const char*) SettingsDescriptions[11], { settings_setCoolingBlinkEnabled }, {
+		settings_displayCoolingBlinkEnabled } }, /*Cooling blink warning*/
+{ (const char*) SettingsDescriptions[16], { settings_setScrollSpeed }, {
+		settings_displayScrollSpeed } }, /*Scroll Speed for descriptions*/
+{ NULL, { NULL }, { NULL } }            // end of menu marker. DO NOT REMOVE
+};
+const menuitem PowerMenu[] = {
+/*
+ * Sleep Temp
+ * 	Sleep Time
+ * 	Shutdown Time
+ * 	Motion Sensitivity
+ */
+{ (const char*) SettingsDescriptions[1], { settings_setSleepTemp }, {
+		settings_displaySleepTemp } }, /*Sleep Temp*/
+{ (const char*) SettingsDescriptions[2], { settings_setSleepTime }, {
+		settings_displaySleepTime } }, /*Sleep Time*/
+{ (const char*) SettingsDescriptions[3], { settings_setShutdownTime }, {
+		settings_displayShutdownTime } }, /*Shutdown Time*/
+{ (const char*) SettingsDescriptions[4], { settings_setSensitivity }, {
+		settings_displaySensitivity } }, /* Motion Sensitivity*/
+{ NULL, { NULL }, { NULL } }            // end of menu marker. DO NOT REMOVE
+};
+const menuitem advancedMenu[] = {
+
+/*
+ * Detailed IDLE
+ *  Detailed Soldering
+ *  Logo Time
+ *  Calibrate Temperature
+ *  Calibrate Input V
+ *  Reset Settings
+ */
+{ (const char*) SettingsDescriptions[6], { settings_setAdvancedIDLEScreens }, {
+		settings_displayAdvancedIDLEScreens } }, /* Advanced idle screen*/
+{ (const char*) SettingsDescriptions[15],
+		{ settings_setAdvancedSolderingScreens }, {
+				settings_displayAdvancedSolderingScreens } }, /* Advanced soldering screen*/
+{ (const char*) SettingsDescriptions[13], { settings_setResetSettings }, {
+		settings_displayResetSettings } }, /*Resets settings*/
+{ (const char*) SettingsDescriptions[12], { settings_setCalibrate }, {
+		settings_displayCalibrate } }, /*Calibrate tip*/
+{ (const char*) SettingsDescriptions[14], { settings_setCalibrateVIN }, {
+		settings_displayCalibrateVIN } }, /*Voltage input cal*/
+{ NULL, { NULL }, { NULL } }            // end of menu marker. DO NOT REMOVE
 };
 
 static void printShortDescriptionSingleLine(uint32_t shortDescIndex) {
-  lcd.setFont(0);
-  lcd.setCharCursor(0, 0);
-  lcd.print(SettingsShortNames[shortDescIndex][0]);
+	lcd.setFont(0);
+	lcd.setCharCursor(0, 0);
+	lcd.print(SettingsShortNames[shortDescIndex][0]);
 }
 
 static void printShortDescriptionDoubleLine(uint32_t shortDescIndex) {
-  lcd.setFont(1);
-  lcd.setCharCursor(0, 0);
-  lcd.print(SettingsShortNames[shortDescIndex][0]);
-  lcd.setCharCursor(0, 1);
-  lcd.print(SettingsShortNames[shortDescIndex][1]);
+	lcd.setFont(1);
+	lcd.setCharCursor(0, 0);
+	lcd.print(SettingsShortNames[shortDescIndex][0]);
+	lcd.setCharCursor(0, 1);
+	lcd.print(SettingsShortNames[shortDescIndex][1]);
 }
 
 /**
@@ -119,334 +206,532 @@ static void printShortDescriptionDoubleLine(uint32_t shortDescIndex) {
  * description.
  */
 static void printShortDescription(uint32_t shortDescIndex,
-                                  uint16_t cursorCharPosition) {
-  // print short description (default single line, explicit double line)
-  if (SettingsShortNameType == SHORT_NAME_DOUBLE_LINE) {
-    printShortDescriptionDoubleLine(shortDescIndex);
-  } else {
-    printShortDescriptionSingleLine(shortDescIndex);
-  }
+		uint16_t cursorCharPosition) {
+	// print short description (default single line, explicit double line)
+	if (SettingsShortNameType == SHORT_NAME_DOUBLE_LINE) {
+		printShortDescriptionDoubleLine(shortDescIndex);
+	} else {
+		printShortDescriptionSingleLine(shortDescIndex);
+	}
 
-  // prepare cursor for value
-  lcd.setFont(0);
-  lcd.setCharCursor(cursorCharPosition, 0);
+	// prepare cursor for value
+	lcd.setFont(0);
+	lcd.setCharCursor(cursorCharPosition, 0);
 }
 
 static int userConfirmation(const char* message) {
-  uint8_t maxOffset = strlen(message) + 7;
-  uint32_t messageStart = HAL_GetTick();
+	uint16_t messageWidth = FONT_12_WIDTH * (strlen(message) + 7);
+	uint32_t messageStart = xTaskGetTickCount();
 
-  lcd.setFont(0);
-  lcd.setCursor(0, 0);
+	lcd.setFont(0);
+	lcd.setCursor(0, 0);
+	int16_t lastOffset = -1;
+	bool lcdRefresh = true;
 
-  for (;;) {
-    int16_t messageOffset = (((HAL_GetTick() - messageStart) / 150) % maxOffset);
 
-    lcd.clearScreen();
-    lcd.setCursor(12 * (7 - messageOffset), 0);
-    lcd.print(message);
+	for (;;) {
 
-    ButtonState buttons = getButtonState();
-    switch (buttons) {
-      case BUTTON_F_SHORT:
-        //User confirmed
-        return 1;
+					int16_t messageOffset =
+							((xTaskGetTickCount() - messageStart)
+									/ (systemSettings.descriptionScrollSpeed == 1 ?
+											1 : 2));
+					messageOffset %= messageWidth;		//Roll around at the end
 
-      case BUTTON_BOTH:
-      case BUTTON_B_SHORT:
-      case BUTTON_F_LONG:
-      case BUTTON_B_LONG:
-        return 0;
 
-      case BUTTON_NONE:
-        break;
-    }
+		if (lastOffset != messageOffset) {
+			lcd.clearScreen();
 
-    lcd.refresh();
-    osDelay(50);
-  }
+			//^ Rolling offset based on time
+			lcd.setCursor((OLED_WIDTH - messageOffset), 0);
+			lcd.print(message);
+			lastOffset = messageOffset;
+			lcdRefresh = true;
+		}
+
+		ButtonState buttons = getButtonState();
+		switch (buttons) {
+		case BUTTON_F_SHORT:
+			//User confirmed
+			return 1;
+
+		case BUTTON_NONE:
+			break;
+		default:
+		case BUTTON_BOTH:
+		case BUTTON_B_SHORT:
+		case BUTTON_F_LONG:
+		case BUTTON_B_LONG:
+			return 0;
+		}
+
+		if (lcdRefresh) {
+			lcd.refresh();
+			osDelay(20);
+			lcdRefresh = false;
+		}
+	}
+	return 0;
 }
 
-
 static void settings_setInputVRange(void) {
-  systemSettings.cutoutSetting = (systemSettings.cutoutSetting + 1) % 5;
+	systemSettings.cutoutSetting = (systemSettings.cutoutSetting + 1) % 5;
 }
 
 static void settings_displayInputVRange(void) {
-  printShortDescription(0, 6);
+	printShortDescription(0, 6);
 
-  if (systemSettings.cutoutSetting) {
-    lcd.drawChar('0' + 2 + systemSettings.cutoutSetting);
-    lcd.drawChar('S');
-  } else {
-    lcd.print("DC");
-  }
+	if (systemSettings.cutoutSetting) {
+		lcd.drawChar('0' + 2 + systemSettings.cutoutSetting);
+		lcd.drawChar('S');
+	} else {
+		lcd.print("DC");
+	}
 }
 
-
 static void settings_setSleepTemp(void) {
-  systemSettings.SleepTemp += 10;
-  if (systemSettings.SleepTemp > 300) systemSettings.SleepTemp = 50;
+	systemSettings.SleepTemp += 10;
+	if (systemSettings.SleepTemp > 300)
+		systemSettings.SleepTemp = 50;
 }
 
 static void settings_displaySleepTemp(void) {
-  printShortDescription(1, 5);
-  lcd.printNumber(systemSettings.SleepTemp, 3);
+	printShortDescription(1, 5);
+	lcd.printNumber(systemSettings.SleepTemp, 3);
 }
 
-
 static void settings_setSleepTime(void) {
-  systemSettings.SleepTime++;  // Go up 1 minute at a time
-  if (systemSettings.SleepTime >= 16) {
-    systemSettings.SleepTime = 1;  // can't set time over 10 mins
-  }
-  // Remember that ^ is the time of no movement
+	systemSettings.SleepTime++;  // Go up 1 minute at a time
+	if (systemSettings.SleepTime >= 16) {
+		systemSettings.SleepTime = 1;  // can't set time over 10 mins
+	}
+	// Remember that ^ is the time of no movement
 }
 
 static void settings_displaySleepTime(void) {
-  printShortDescription(2, 5);
+	printShortDescription(2, 5);
 
-  if (systemSettings.SleepTime < 6) {
-    lcd.printNumber(systemSettings.SleepTime * 10, 2);
-    lcd.drawChar('S');
-  } else {
-    lcd.printNumber(systemSettings.SleepTime - 5, 2);
-    lcd.drawChar('M');
-  }
+	if (systemSettings.SleepTime < 6) {
+		lcd.printNumber(systemSettings.SleepTime * 10, 2);
+		lcd.drawChar('S');
+	} else {
+		lcd.printNumber(systemSettings.SleepTime - 5, 2);
+		lcd.drawChar('M');
+	}
 }
 
-
 static void settings_setShutdownTime(void) {
-  systemSettings.ShutdownTime++;
-  if (systemSettings.ShutdownTime > 60) {
-    systemSettings.ShutdownTime = 0;  // wrap to off
-  }
+	systemSettings.ShutdownTime++;
+	if (systemSettings.ShutdownTime > 60) {
+		systemSettings.ShutdownTime = 0;  // wrap to off
+	}
 }
 
 static void settings_displayShutdownTime(void) {
-  printShortDescription(3, 6);
-  lcd.printNumber(systemSettings.ShutdownTime, 2);
+	printShortDescription(3, 6);
+	lcd.printNumber(systemSettings.ShutdownTime, 2);
 }
 
-
 static void settings_setTempF(void) {
-  systemSettings.temperatureInF = !systemSettings.temperatureInF;
+	systemSettings.temperatureInF = !systemSettings.temperatureInF;
 }
 
 static void settings_displayTempF(void) {
-  printShortDescription(5, 7);
+	printShortDescription(5, 7);
 
-  lcd.drawChar((systemSettings.temperatureInF) ? 'F' : 'C');
+	lcd.drawChar((systemSettings.temperatureInF) ? 'F' : 'C');
 }
 
-
 static void settings_setSensitivity(void) {
-  systemSettings.sensitivity++;
-  systemSettings.sensitivity = systemSettings.sensitivity % 10;
+	systemSettings.sensitivity++;
+	systemSettings.sensitivity = systemSettings.sensitivity % 10;
 }
 
 static void settings_displaySensitivity(void) {
-  printShortDescription(4, 7);
-  lcd.printNumber(systemSettings.sensitivity, 1);
+	printShortDescription(4, 7);
+	lcd.printNumber(systemSettings.sensitivity, 1);
 }
 
-
 static void settings_setAdvancedSolderingScreens(void) {
-  systemSettings.detailedSoldering = !systemSettings.detailedSoldering;
+	systemSettings.detailedSoldering = !systemSettings.detailedSoldering;
 }
 
 static void settings_displayAdvancedSolderingScreens(void) {
-  printShortDescription(15, 7);
+	printShortDescription(15, 7);
 
-  lcd.drawCheckbox(systemSettings.detailedSoldering);
+	lcd.drawCheckbox(systemSettings.detailedSoldering);
 }
 
-
 static void settings_setAdvancedIDLEScreens(void) {
-  systemSettings.detailedIDLE = !systemSettings.detailedIDLE;
+	systemSettings.detailedIDLE = !systemSettings.detailedIDLE;
 }
 
 static void settings_displayAdvancedIDLEScreens(void) {
-  printShortDescription(6, 7);
+	printShortDescription(6, 7);
 
-  lcd.drawCheckbox(systemSettings.detailedIDLE);
+	lcd.drawCheckbox(systemSettings.detailedIDLE);
+}
+static void settings_setScrollSpeed(void) {
+
+	if (systemSettings.descriptionScrollSpeed == 0)
+		systemSettings.descriptionScrollSpeed = 1;
+	else
+		systemSettings.descriptionScrollSpeed = 0;
+}
+static void settings_displayScrollSpeed(void) {
+	printShortDescription(16, 7);
+	lcd.drawChar(
+			(systemSettings.descriptionScrollSpeed) ?
+					SettingFastChar : SettingSlowChar);
 }
 
-
 static void settings_setDisplayRotation(void) {
-  systemSettings.OrientationMode++;
-  systemSettings.OrientationMode = systemSettings.OrientationMode % 3;
+	systemSettings.OrientationMode++;
+	systemSettings.OrientationMode = systemSettings.OrientationMode % 3;
+	switch (systemSettings.OrientationMode) {
+		case 0:
+			lcd.setRotation(false);
+			break;
+		case 1:
+			lcd.setRotation(true);
+			break;
+		case 2:
+			//do nothing on auto
+			break;
+		default:
+			break;
+		}
 }
 
 static void settings_displayDisplayRotation(void) {
-  printShortDescription(7, 7);
+	printShortDescription(7, 7);
 
-  switch (systemSettings.OrientationMode) {
-    case 0:
-      lcd.drawChar(SettingRightChar);
-      break;
-    case 1:
-      lcd.drawChar(SettingLeftChar);
-      break;
-    case 2:
-      lcd.drawChar(SettingAutoChar);
-      break;
-    default:
-      lcd.drawChar(SettingRightChar);
-      break;
-  }
+	switch (systemSettings.OrientationMode) {
+	case 0:
+		lcd.drawChar(SettingRightChar);
+		break;
+	case 1:
+		lcd.drawChar(SettingLeftChar);
+		break;
+	case 2:
+		lcd.drawChar(SettingAutoChar);
+		break;
+	default:
+		lcd.drawChar(SettingRightChar);
+		break;
+	}
 }
 
-
 static void settings_setBoostModeEnabled(void) {
-  systemSettings.boostModeEnabled = !systemSettings.boostModeEnabled;
+	systemSettings.boostModeEnabled = !systemSettings.boostModeEnabled;
 }
 
 static void settings_displayBoostModeEnabled(void) {
-  printShortDescription(8, 7);
+	printShortDescription(8, 7);
 
-  lcd.drawCheckbox(systemSettings.boostModeEnabled);
+	lcd.drawCheckbox(systemSettings.boostModeEnabled);
 }
 
-
 static void settings_setBoostTemp(void) {
-  systemSettings.BoostTemp += 10;  // Go up 10 at a time
-  if (systemSettings.temperatureInF) {
-    if (systemSettings.BoostTemp > 850) {
-      systemSettings.BoostTemp = 480;  // loop back at 250
-    }
-  } else {
-    if (systemSettings.BoostTemp > 450) {
-      systemSettings.BoostTemp = 250;  // loop back at 250
-    }
-  }
+	systemSettings.BoostTemp += 10;  // Go up 10 at a time
+	if (systemSettings.temperatureInF) {
+		if (systemSettings.BoostTemp > 850) {
+			systemSettings.BoostTemp = 480;  // loop back at 250
+		}
+	} else {
+		if (systemSettings.BoostTemp > 450) {
+			systemSettings.BoostTemp = 250;  // loop back at 250
+		}
+	}
 }
 
 static void settings_displayBoostTemp(void) {
-  printShortDescription(9, 5);
-  lcd.printNumber(systemSettings.BoostTemp, 3);
+	printShortDescription(9, 5);
+	lcd.printNumber(systemSettings.BoostTemp, 3);
 }
 
-
 static void settings_setAutomaticStartMode(void) {
-  systemSettings.autoStartMode++;
-  systemSettings.autoStartMode %= 2;
+	systemSettings.autoStartMode++;
+	systemSettings.autoStartMode %= 2;
 }
 
 static void settings_displayAutomaticStartMode(void) {
-  printShortDescription(10, 7);
+	printShortDescription(10, 7);
 
-  lcd.drawCheckbox(systemSettings.autoStartMode);
+	lcd.drawCheckbox(systemSettings.autoStartMode);
 }
 
-
 static void settings_setCoolingBlinkEnabled(void) {
-  systemSettings.coolingTempBlink = !systemSettings.coolingTempBlink;
+	systemSettings.coolingTempBlink = !systemSettings.coolingTempBlink;
 }
 
 static void settings_displayCoolingBlinkEnabled(void) {
-  printShortDescription(11, 7);
+	printShortDescription(11, 7);
 
-  lcd.drawCheckbox(systemSettings.coolingTempBlink);
+	lcd.drawCheckbox(systemSettings.coolingTempBlink);
 }
 
-
 static void settings_setResetSettings(void) {
-  if(userConfirmation(SettingsResetWarning)) {
-    resetSettings();
+	if (userConfirmation(SettingsResetWarning)) {
+		resetSettings();
 
-    lcd.setFont(0);
-    lcd.setCursor(0, 0);
-    lcd.print("RESET OK");
-    lcd.refresh();
+		lcd.setFont(0);
+		lcd.setCursor(0, 0);
+		lcd.print("RESET OK");
+		lcd.refresh();
 
-    waitForButtonPressOrTimeout(2000);
-  }
+		waitForButtonPressOrTimeout(200);
+	}
 }
 
 static void settings_displayResetSettings(void) {
-  printShortDescription(13, 7);
+	printShortDescription(13, 7);
 }
 
-
 static void settings_setCalibrate(void) {
-  if(userConfirmation(SettingsCalibrationWarning)) {
-    //User confirmed
-    //So we now perform the actual calculation
-    lcd.clearScreen();
-    lcd.setCursor(0, 0);
-    lcd.print(".....");
-    lcd.refresh();
+	if (userConfirmation(SettingsCalibrationWarning)) {
+		//User confirmed
+		//So we now perform the actual calculation
+		lcd.clearScreen();
+		lcd.setCursor(0, 0);
+		lcd.print(".....");
+		lcd.refresh();
 
-    setCalibrationOffset(0);            //turn off the current offset
-    for (uint8_t i = 0; i < 20; i++) {
-      getTipRawTemp(1);                 //cycle through the filter a fair bit to ensure we're stable.
-      osDelay(20);
-    }
-    osDelay(100);
+		setCalibrationOffset(0);            //turn off the current offset
+		for (uint8_t i = 0; i < 20; i++) {
+			getTipRawTemp(1); //cycle through the filter a fair bit to ensure we're stable.
+			osDelay(20);
+		}
+		osDelay(100);
 
-    uint16_t rawTempC = tipMeasurementToC(getTipRawTemp(0));
-    //We now measure the current reported tip temperature
-    uint16_t handleTempC = getHandleTemperature() / 10;
-    //We now have an error between these that we want to store as the offset
-    rawTempC = rawTempC - handleTempC;
-    systemSettings.CalibrationOffset = rawTempC;
-    setCalibrationOffset(rawTempC);       //store the error
-    osDelay(100);
-  }
+		uint16_t rawTempC = tipMeasurementToC(getTipRawTemp(0));
+		//We now measure the current reported tip temperature
+		uint16_t handleTempC = getHandleTemperature() / 10;
+		//We now have an error between these that we want to store as the offset
+		rawTempC = rawTempC - handleTempC;
+		systemSettings.CalibrationOffset = rawTempC;
+		setCalibrationOffset(rawTempC);       //store the error
+		osDelay(100);
+	}
 }
 
 static void settings_displayCalibrate(void) {
-  printShortDescription(12, 5);
+	printShortDescription(12, 5);
 }
 
-
 static void settings_setCalibrateVIN(void) {
-  // Jump to the voltage calibration subscreen
-  lcd.setFont(0);
-  lcd.clearScreen();
-  lcd.setCursor(0, 0);
+	// Jump to the voltage calibration subscreen
+	lcd.setFont(0);
+	lcd.clearScreen();
+	lcd.setCursor(0, 0);
 
-  for (;;) {
-    lcd.setCursor(0, 0);
-    lcd.printNumber(getInputVoltageX10(systemSettings.voltageDiv) / 10, 2);
-    lcd.print(".");
-    lcd.printNumber(getInputVoltageX10(systemSettings.voltageDiv) % 10, 1);
-    lcd.print("V");
+	for (;;) {
+		lcd.setCursor(0, 0);
+		lcd.printNumber(getInputVoltageX10(systemSettings.voltageDiv) / 10, 2);
+		lcd.print(".");
+		lcd.printNumber(getInputVoltageX10(systemSettings.voltageDiv) % 10, 1);
+		lcd.print("V");
 
-    ButtonState buttons = getButtonState();
-    switch (buttons) {
-      case BUTTON_F_SHORT:
-        systemSettings.voltageDiv++;
-        break;
+		ButtonState buttons = getButtonState();
+		switch (buttons) {
+		case BUTTON_F_SHORT:
+			systemSettings.voltageDiv++;
+			break;
 
-      case BUTTON_B_SHORT:
-        systemSettings.voltageDiv--;
-        break;
+		case BUTTON_B_SHORT:
+			systemSettings.voltageDiv--;
+			break;
 
-      case BUTTON_BOTH:
-      case BUTTON_F_LONG:
-      case BUTTON_B_LONG:
-        saveSettings();
-        return;
+		case BUTTON_BOTH:
+		case BUTTON_F_LONG:
+		case BUTTON_B_LONG:
+			saveSettings();
+			return;
 
-      case BUTTON_NONE:
-      default:
-        break;
-    }
+		case BUTTON_NONE:
+		default:
+			break;
+		}
 
-    lcd.refresh();
-    osDelay(50);
+		lcd.refresh();
+		osDelay(50);
 
-    // Cap to sensible values
-    if (systemSettings.voltageDiv < 90) {
-      systemSettings.voltageDiv = 90;
-    } else if (systemSettings.voltageDiv > 130) {
-      systemSettings.voltageDiv = 130;
-    }
-  }
+		// Cap to sensible values
+		if (systemSettings.voltageDiv < 90) {
+			systemSettings.voltageDiv = 90;
+		} else if (systemSettings.voltageDiv > 130) {
+			systemSettings.voltageDiv = 130;
+		}
+	}
 }
 
 static void settings_displayCalibrateVIN(void) {
-  printShortDescription(14, 5);
+	printShortDescription(14, 5);
+}
+static void settings_displaySolderingMenu(void) {
+	//Call into the menu
+	lcd.setFont(1);
+	lcd.setCursor(0, 0);
+	//Draw title
+	lcd.print(SettingsMenuEntries[0]);
+	//Draw symbol
+	//16 pixel wide image
+	lcd.drawArea(96 - 16, 0, 16, 16, (&SettingsMenuIcons[(16 * 2) * 0]));
+}
+static void settings_enterSolderingMenu(void) {
+	gui_Menu(solderingMenu);
+}
+static void settings_displayPowerMenu(void) {
+	lcd.setFont(1);
+	lcd.setCursor(0, 0);
+	//Draw title
+	lcd.print(SettingsMenuEntries[1]);
+	//Draw symbol
+	//16 pixel wide image
+	lcd.drawArea(96 - 16, 0, 16, 16, (&SettingsMenuIcons[(16 * 2) * 1]));
+}
+static void settings_enterPowerMenu(void) {
+	gui_Menu(PowerMenu);
+}
+static void settings_displayUIMenu(void) {
+	lcd.setFont(1);
+	lcd.setCursor(0, 0);
+	//Draw title
+	lcd.print(SettingsMenuEntries[2]);
+	//Draw symbol
+	//16 pixel wide image
+	lcd.drawArea(96 - 16, 0, 16, 16, (&SettingsMenuIcons[(16 * 2) * 2]));
+}
+static void settings_enterUIMenu(void) {
+	gui_Menu(UIMenu);
+}
+static void settings_displayAdvancedMenu(void) {
+	lcd.setFont(1);
+	lcd.setCursor(0, 0);
+	//Draw title
+	lcd.print(SettingsMenuEntries[3]);
+	//Draw symbol
+	//16 pixel wide image
+	lcd.drawArea(96 - 16, 0, 16, 16, (&SettingsMenuIcons[(16 * 2) * 3]));
+
+}
+static void settings_enterAdvancedMenu(void) {
+	gui_Menu(advancedMenu);
+}
+
+void gui_Menu(const menuitem* menu) {
+	// Draw the settings menu and provide iteration support etc
+	uint8_t currentScreen = 0;
+	uint32_t autoRepeatTimer = 0;
+	uint8_t autoRepeatAcceleration = 0;
+	bool earlyExit = false;
+	uint32_t descriptionStart = 0;
+	int16_t lastOffset = -1;
+	bool lcdRefresh = true;
+	ButtonState lastButtonState = BUTTON_NONE;
+
+	while ((menu[currentScreen].draw.func != NULL) && earlyExit == false) {
+		lcd.setFont(0);
+		lcd.setCursor(0, 0);
+		//If the user has hesitated for >=3 seconds, show the long text
+		//Otherwise "draw" the option
+		if (xTaskGetTickCount() - lastButtonTime < 300) {
+			lcd.clearScreen();
+			menu[currentScreen].draw.func();
+			lastOffset = -1;
+			lcdRefresh = true;
+		} else {
+			// Draw description
+			if (descriptionStart == 0)
+				descriptionStart = xTaskGetTickCount();
+			// lower the value - higher the speed
+			int16_t descriptionWidth = FONT_12_WIDTH
+					* (strlen(menu[currentScreen].description) + 7);
+			int16_t descriptionOffset =
+					((xTaskGetTickCount() - descriptionStart)
+							/ (systemSettings.descriptionScrollSpeed == 1 ?
+									1 : 2));
+			descriptionOffset %= descriptionWidth;		//Roll around at the end
+
+			if (lastOffset != descriptionOffset) {
+				lcd.clearScreen();
+
+				//^ Rolling offset based on time
+				lcd.setCursor((OLED_WIDTH - descriptionOffset), 0);
+				lcd.print(menu[currentScreen].description);
+				lastOffset = descriptionOffset;
+				lcdRefresh = true;
+			}
+
+		}
+
+		ButtonState buttons = getButtonState();
+
+		if (buttons != lastButtonState) {
+			autoRepeatAcceleration = 0;
+			lastButtonState = buttons;
+		}
+
+		switch (buttons) {
+		case BUTTON_BOTH:
+			earlyExit = true;  // will make us exit next loop
+			descriptionStart = 0;
+			break;
+		case BUTTON_F_SHORT:
+			// increment
+			if (descriptionStart == 0) {
+				if (menu[currentScreen].incrementHandler.func != NULL)
+					menu[currentScreen].incrementHandler.func();
+				else
+					earlyExit = true;
+			} else
+				descriptionStart = 0;
+			break;
+		case BUTTON_B_SHORT:
+			if (descriptionStart == 0)
+				currentScreen++;
+			else
+				descriptionStart = 0;
+			break;
+		case BUTTON_F_LONG:
+			if (xTaskGetTickCount() - autoRepeatTimer
+					+ autoRepeatAcceleration> PRESS_ACCEL_INTERVAL_MAX) {
+				menu[currentScreen].incrementHandler.func();
+				autoRepeatTimer = xTaskGetTickCount();
+				descriptionStart = 0;
+
+				autoRepeatAcceleration += PRESS_ACCEL_STEP;
+			}
+			break;
+		case BUTTON_B_LONG:
+			if (xTaskGetTickCount() - autoRepeatTimer
+					+ autoRepeatAcceleration> PRESS_ACCEL_INTERVAL_MAX) {
+				currentScreen++;
+				autoRepeatTimer = xTaskGetTickCount();
+				descriptionStart = 0;
+
+				autoRepeatAcceleration += PRESS_ACCEL_STEP;
+			}
+			break;
+		case BUTTON_NONE:
+		default:
+			break;
+		}
+
+		if ((PRESS_ACCEL_INTERVAL_MAX - autoRepeatAcceleration)
+				< PRESS_ACCEL_INTERVAL_MIN) {
+			autoRepeatAcceleration = PRESS_ACCEL_INTERVAL_MAX - PRESS_ACCEL_INTERVAL_MIN;
+		}
+
+		if (lcdRefresh) {
+			lcd.refresh();  // update the LCD
+			osDelay(20);
+			lcdRefresh = false;
+		}
+	}
+
+}
+
+void enterSettingsMenu() {
+	gui_Menu(rootSettingsMenu);  //Call the root menu
+	saveSettings();
 }

workspace/TS100/src/hardware.c

@@ -18,7 +18,7 @@ uint16_t getHandleTemperature() {
 	// STM32 = 4096 count @ 3.3V input -> But
 	// We oversample by 32/(2^2) = 8 times oversampling
 	// Therefore 32768 is the 3.3V input, so 0.201416015625 mV per count
-	// So we need to subtract an offset of 0.5V to center on 0C (2482 counts)
+	// So we need to subtract an offset of 0.5V to center on 0C (2482*2 counts)
 	//
 	uint16_t result = getADC(0);
 	if (result < 4964)
@@ -29,21 +29,25 @@ uint16_t getHandleTemperature() {
 
 }
 uint16_t tipMeasurementToC(uint16_t raw) {
-	return ((raw - 532) / 33) + (getHandleTemperature() / 10) - CalibrationTempOffset;
+	return ((raw - 532) / 33) + (getHandleTemperature() / 10)
+			- CalibrationTempOffset;
 	//Surprisingly that appears to be a fairly good linear best fit
 }
 uint16_t ctoTipMeasurement(uint16_t temp) {
 	//We need to compensate for cold junction temp
-	return ((temp - (getHandleTemperature() / 10) + CalibrationTempOffset) * 33) + 532;
+	return ((temp - (getHandleTemperature() / 10) + CalibrationTempOffset) * 33)
+			+ 532;
 }
 
 uint16_t tipMeasurementToF(uint16_t raw) {
-	return ((((raw - 532) / 33) + (getHandleTemperature() / 10) - CalibrationTempOffset) * 9) / 5 + 32;
+	return ((((raw - 532) / 33) + (getHandleTemperature() / 10)
+			- CalibrationTempOffset) * 9) / 5 + 32;
 
 }
 uint16_t ftoTipMeasurement(uint16_t temp) {
 
-	return (((((temp - 32) * 5) / 9) - (getHandleTemperature() / 10) + CalibrationTempOffset) * 33) + 532;
+	return (((((temp - 32) * 5) / 9) - (getHandleTemperature() / 10)
+			+ CalibrationTempOffset) * 33) + 532;
 }
 
 uint16_t getTipInstantTemperature() {
@@ -58,7 +62,7 @@ uint16_t getTipInstantTemperature() {
 uint16_t getTipRawTemp(uint8_t instant) {
 #define  filterDepth1 1
 	/*Pre filter used before PID*/
-#define  filterDepth2 64
+#define  filterDepth2 32
 	/*Post filter used for UI display*/
 	static uint16_t filterLayer1[filterDepth1];
 	static uint16_t filterLayer2[filterDepth2];
@@ -116,7 +120,7 @@ uint8_t getTipPWM() {
 	return htim2.Instance->CCR4;
 }
 void setTipPWM(uint8_t pulse) {
-	PWMSafetyTimer = 100;    //This is decremented in the handler for PWM so that the tip pwm is disabled if the PID task is not scheduled often enough.
+	PWMSafetyTimer = 640; //This is decremented in the handler for PWM so that the tip pwm is disabled if the PID task is not scheduled often enough.
 	if (pulse > 100)
 		pulse = 100;
 	if (pulse) {
@@ -133,7 +137,7 @@ void HAL_TIM_PeriodElapsedCallback(TIM_HandleTypeDef *htim) {
 	//Period has elapsed
 	if (htim->Instance == TIM2) {
 		//we want to turn on the output again
-		PWMSafetyTimer--;    //We decrement this safety value so that lockups in the scheduler will not cause the PWM to become locked in an active driving state.
+		PWMSafetyTimer--; //We decrement this safety value so that lockups in the scheduler will not cause the PWM to become locked in an active driving state.
 		//While we could assume this could never happened, its a small price for increased safety
 		if (htim2.Instance->CCR4 && PWMSafetyTimer) {
 			htim3.Instance->CCR1 = 50;
@@ -153,6 +157,14 @@ void HAL_TIM_PWM_PulseFinishedCallback(TIM_HandleTypeDef *htim) {
 		if (htim->Channel == HAL_TIM_ACTIVE_CHANNEL_4) {
 			HAL_TIM_PWM_Stop(&htim3, TIM_CHANNEL_1);
 			htim3.Instance->CCR1 = 0;
-		}
+
+		} /*else if (htim->Channel == HAL_TIM_ACTIVE_CHANNEL_1) {
+			HAL_GPIO_WritePin(GPIOA, GPIO_PIN_13, GPIO_PIN_RESET);
+			HAL_GPIO_WritePin(GPIOA, GPIO_PIN_14, GPIO_PIN_RESET);
+		}*/
 	}
 }
+
+void HAL_ADCEx_InjectedConvCpltCallback(ADC_HandleTypeDef* hadc) {
+
+}

workspace/TS100/src/stm32f1xx_hal_msp.c

@@ -28,8 +28,9 @@ void HAL_MspInit(void) {
 
 	/**NOJTAG: JTAG-DP Disabled and SW-DP Enabled
 	 */
-	__HAL_AFIO_REMAP_SWJ_NOJTAG()
-	;
+//	__HAL_AFIO_REMAP_SWJ_NOJTAG()
+	__HAL_AFIO_REMAP_SWJ_DISABLE(); /*Disable swd for debug io use*/
+
 
 }
 
@@ -73,7 +74,6 @@ void HAL_ADC_MspInit(ADC_HandleTypeDef* hadc) {
 
 }
 
-
 void HAL_I2C_MspInit(I2C_HandleTypeDef* hi2c) {
 
 	GPIO_InitTypeDef GPIO_InitStruct;
@@ -92,38 +92,10 @@ void HAL_I2C_MspInit(I2C_HandleTypeDef* hi2c) {
 		__HAL_RCC_I2C1_CLK_ENABLE()
 		;
 
-		/* I2C1 DMA Init */
-		/* I2C1_RX Init */
-		hdma_i2c1_rx.Instance = DMA1_Channel7;
-		hdma_i2c1_rx.Init.Direction = DMA_PERIPH_TO_MEMORY;
-		hdma_i2c1_rx.Init.PeriphInc = DMA_PINC_DISABLE;
-		hdma_i2c1_rx.Init.MemInc = DMA_MINC_ENABLE;
-		hdma_i2c1_rx.Init.PeriphDataAlignment = DMA_PDATAALIGN_BYTE;
-		hdma_i2c1_rx.Init.MemDataAlignment = DMA_MDATAALIGN_BYTE;
-		hdma_i2c1_rx.Init.Mode = DMA_NORMAL;
-		hdma_i2c1_rx.Init.Priority = DMA_PRIORITY_LOW;
-		HAL_DMA_Init(&hdma_i2c1_rx);
-
-		__HAL_LINKDMA(hi2c, hdmarx, hdma_i2c1_rx);
-
-		/* I2C1_TX Init */
-		hdma_i2c1_tx.Instance = DMA1_Channel6;
-		hdma_i2c1_tx.Init.Direction = DMA_MEMORY_TO_PERIPH;
-		hdma_i2c1_tx.Init.PeriphInc = DMA_PINC_DISABLE;
-		hdma_i2c1_tx.Init.MemInc = DMA_MINC_ENABLE;
-		hdma_i2c1_tx.Init.PeriphDataAlignment = DMA_PDATAALIGN_BYTE;
-		hdma_i2c1_tx.Init.MemDataAlignment = DMA_MDATAALIGN_BYTE;
-		hdma_i2c1_tx.Init.Mode = DMA_NORMAL;
-		hdma_i2c1_tx.Init.Priority = DMA_PRIORITY_LOW;
-		HAL_DMA_Init(&hdma_i2c1_tx);
-
-		__HAL_LINKDMA(hi2c, hdmatx, hdma_i2c1_tx);
-
 	}
 
 }
 
-
 void HAL_TIM_Base_MspInit(TIM_HandleTypeDef* htim_base) {
 	if (htim_base->Instance == TIM3) {
 		/* Peripheral clock enable */

workspace/TS100/src/stm32f1xx_it.c

@@ -63,16 +63,6 @@ void DMA1_Channel1_IRQHandler(void) {
 	HAL_DMA_IRQHandler(&hdma_adc1);
 }
 
-// DMA used for transmitting I2C packets
-void DMA1_Channel6_IRQHandler(void) {
-	HAL_DMA_IRQHandler(&hdma_i2c1_tx);
-}
-
-//DMA used for receiving I2C packets
-void DMA1_Channel7_IRQHandler(void) {
-	HAL_DMA_IRQHandler(&hdma_i2c1_rx);
-}
-
 //ADC interrupt used for DMA
 void ADC1_2_IRQHandler(void) {
 	HAL_ADC_IRQHandler(&hadc1);