Update bl702_adc.c

This commit is contained in:
Ben V. Brown
2024-06-04 20:05:14 +10:00
parent 4252fb1e24
commit d208c00911

View File

@@ -185,7 +185,7 @@ void ADC_Init(ADC_CFG_Type *cfg) {
CHECK_PARAM(IS_ADC_DATA_WIDTH_TYPE(cfg->resWidth));
/* config 1 */
regCfg1 = 0; // BL_RD_REG(AON_BASE, AON_GPADC_REG_CONFIG1);
regCfg1 = BL_RD_REG(AON_BASE, AON_GPADC_REG_CONFIG1);
regCfg1 = BL_SET_REG_BITS_VAL(regCfg1, AON_GPADC_V18_SEL, cfg->v18Sel);
regCfg1 = BL_SET_REG_BITS_VAL(regCfg1, AON_GPADC_V11_SEL, cfg->v11Sel);
regCfg1 = BL_CLR_REG_BIT(regCfg1, AON_GPADC_DITHER_EN);
@@ -200,13 +200,11 @@ void ADC_Init(ADC_CFG_Type *cfg) {
/* config 2 */
regCfg2 = BL_RD_REG(AON_BASE, AON_GPADC_REG_CONFIG2);
regCfg2 = BL_SET_REG_BITS_VAL(regCfg2, AON_GPADC_DLY_SEL, 0x00);
regCfg2 = BL_SET_REG_BITS_VAL(regCfg2, AON_GPADC_DLY_SEL, 0x02);
regCfg2 = BL_SET_REG_BITS_VAL(regCfg2, AON_GPADC_PGA1_GAIN, cfg->gain1);
regCfg2 = BL_SET_REG_BITS_VAL(regCfg2, AON_GPADC_PGA2_GAIN, cfg->gain2);
regCfg2 = BL_SET_REG_BITS_VAL(regCfg2, AON_GPADC_BIAS_SEL, cfg->biasSel);
regCfg2 = BL_SET_REG_BITS_VAL(regCfg2, AON_GPADC_CHOP_MODE, cfg->chopMode);
regCfg2 = BL_CLR_REG_BIT(regCfg2, AON_GPADC_VBAT_EN); // vbat enabled (off)
regCfg2 = BL_CLR_REG_BIT(regCfg2, AON_GPADC_TSVBE_LOW); // tsen didoe current
/* pga_vcmi_en is for mic */
regCfg2 = BL_CLR_REG_BIT(regCfg2, AON_GPADC_PGA_VCMI_EN);
@@ -233,7 +231,7 @@ void ADC_Init(ADC_CFG_Type *cfg) {
Interrupt_Handler_Register(GPADC_DMA_IRQn, GPADC_DMA_IRQHandler);
#endif
// ADC_Gain_Trim();
ADC_Gain_Trim();
}
/****************************************************************************/
@@ -353,12 +351,12 @@ void ADC_Scan_Channel_Config(const ADC_Chan_Type posChList[], const ADC_Chan_Typ
void ADC_Start(void) {
uint32_t regCmd;
// /* disable convert start */
// regCmd = BL_RD_REG(AON_BASE, AON_GPADC_REG_CMD);
// regCmd = BL_CLR_REG_BIT(regCmd, AON_GPADC_CONV_START);
// BL_WR_REG(AON_BASE, AON_GPADC_REG_CMD, regCmd);
/* disable convert start */
regCmd = BL_RD_REG(AON_BASE, AON_GPADC_REG_CMD);
regCmd = BL_CLR_REG_BIT(regCmd, AON_GPADC_CONV_START);
BL_WR_REG(AON_BASE, AON_GPADC_REG_CMD, regCmd);
// ADC_RESTART_DUMMY_WAIT;
ADC_RESTART_DUMMY_WAIT;
/* enable convert start */
regCmd = BL_RD_REG(AON_BASE, AON_GPADC_REG_CMD);