Lock max temp

source/Core/BSP/Sequre/BSP.cpp

@@ -256,3 +256,7 @@ uint16_t getTipInertia() { return TIP_THERMAL_INERTIA; }
 void setBuzzer(bool on) {}
 
 void showBootLogo(void) { BootLogo::handleShowingLogo((uint8_t *)FLASH_LOGOADDR); }
+
+#ifdef CUSTOM_MAX_TEMP_C
+TemperatureType_t getCustomTipMaxInC() { return MAX_TEMP_C; }
+#endif

source/Core/BSP/Sequre/configuration.h

@@ -205,6 +205,7 @@
 // Uses a HUB238 for PD negotiation like the S60, also has a buzzer. Feels like designed to share with S60
 // Hold back left button for "DFU"
 
+#define SOLDERING_TEMP     200 // Default soldering temp is 200.0 °C
 #define VOLTAGE_DIV        460 // Default divider scaler
 #define CALIBRATION_OFFSET 0   // Default adc offset in uV
 #define PID_POWER_LIMIT    70  // Sets the max pwm power limit
@@ -228,7 +229,7 @@
 #define TIP_THERMAL_INERTIA 128 // We use a large inertia value to smooth out the drive to the tip since its stupidly sensitive
 
 #define TIP_RESISTANCE 52 // PCB heater, measured at ~19C. Will shift by temp a decent amount
-
+#define CUSTOM_MAX_TEMP_C
 #define PROFILE_SUPPORT           1 // Soldering Profiles
 #define OLED_128x32               1 // Larger OLED
 #define OLED_FLIP                 1 // Mounted upside down

source/Core/Threads/MOVThread.cpp

@@ -30,13 +30,6 @@ uint8_t    accelInit        = 0;
 TickType_t lastMovementTime = 0;
 // Order matters for probe order, some Acceleromters do NOT like bad reads; and we have a bunch of overlap of addresses
 void detectAccelerometerVersion() {
-  DetectedAccelerometerVersion = AccelType::Scanning;
-#ifdef NO_ACCEL
-  setSettingValue(SettingsOptions::Sensitivity, 0);
-  DetectedAccelerometerVersion = AccelType::None;
-  return;
-#endif
-
 #ifdef ACCEL_MMA
   if (MMA8652FC::detect()) {
     if (MMA8652FC::initalize()) {
@@ -146,6 +139,12 @@ inline void readAccelerometer(int16_t &tx, int16_t &ty, int16_t &tz, Orientation
   }
 }
 void startMOVTask(void const *argument __unused) {
+#ifdef NO_ACCEL
+  DetectedAccelerometerVersion = AccelType::None;
+  for (;;) {
+    osDelay(2 * TICKS_SECOND);
+  }
+#endif
 
   osDelay(TICKS_100MS / 5); // This is here as the BMA doesnt start up instantly and can wedge the I2C bus if probed too fast after boot
   detectAccelerometerVersion();