me/IronOS
1
0
Fork 1
mirror of https://github.com/Ralim/IronOS.git synced 2025-02-26 07:53:55 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity

Setup for temp reading

Browse Source
This commit is contained in:
Ben V. Brown
2024-06-08 19:13:55 +10:00
parent 19ec5c889f
commit ef6e944b13
3 changed files with 24 additions and 11 deletions
Download Patch File Download Diff File Expand all files Collapse all files

4
source/Core/BSP/Sequre/BSP.cpp
View File

@@ -53,6 +53,7 @@ static const uint16_t NTCHandleLookup[] = {
};
uint16_t getHandleTemperature(uint8_t sample) {
#ifdef TMP36_ADC1_CHANNEL
int32_t result = getADCHandleTemp(sample);
// S60 uses 10k NTC resistor
// For now not doing interpolation
@@ -62,6 +63,9 @@ uint16_t getHandleTemperature(uint8_t sample) {
}
}
return 45 * 10;
#else
return 0; // Not implemented
#endif
}
uint16_t getInputVoltageX10(uint16_t divisor, uint8_t sample) {

10
source/Core/BSP/Sequre/Pins.h
View File

@@ -73,19 +73,21 @@
#ifdef MODEL_T55
#define KEY_B_Pin GPIO_PIN_1
#define KEY_B_GPIO_Port GPIOB
#define KEY_A_Pin GPIO_PIN_1
#define KEY_A_GPIO_Port GPIOB
// No cold junction compensation as its a PT1000
#define TIP_TEMP_Pin GPIO_PIN_5
#define TIP_TEMP_GPIO_Port GPIOA
#define TIP_TEMP_ADC1_CHANNEL ADC_CHANNEL_5
#define TIP_TEMP_ADC2_CHANNEL ADC_CHANNEL_5
#define VIN_Pin GPIO_PIN_4
#define VIN_GPIO_Port GPIOA
#define VIN_ADC1_CHANNEL ADC_CHANNEL_4
#define VIN_ADC2_CHANNEL ADC_CHANNEL_4
#define KEY_A_Pin GPIO_PIN_0
#define KEY_A_GPIO_Port GPIOB
#define KEY_B_Pin GPIO_PIN_0
#define KEY_B_GPIO_Port GPIOB
#define PWM_Out_Pin GPIO_PIN_8
#define PWM_Out_GPIO_Port GPIOB
#define PWM_Out_CHANNEL TIM_CHANNEL_3 // Timer 4; channel 3

21
source/Core/BSP/Sequre/configuration.h
View File

@@ -206,24 +206,31 @@
// Hold back left button for "DFU"
#define VOLTAGE_DIV 460 // Default divider scaler
#define CALIBRATION_OFFSET 200 // Default adc offset in uV
#define CALIBRATION_OFFSET 0 // Default adc offset in uV
#define PID_POWER_LIMIT 70 // Sets the max pwm power limit
#define POWER_LIMIT 0 // 0 watts default limit
#define MAX_POWER_LIMIT 70
#define POWER_LIMIT_STEPS 5
#define OP_AMP_GAIN_STAGE 536
#define OP_AMP_GAIN_STAGE 1
#define TEMP_uV_LOOKUP_PT1000
#define USB_PD_VMAX 20 // Maximum voltage for PD to negotiate
#define NO_DISPLAY_ROTATE // Disable OLED rotation by accel
#define HARDWARE_MAX_WATTAGE_X10 600
#define USB_PD_VMAX 20 // Maximum voltage for PD to negotiate
#define NO_DISPLAY_ROTATE // Disable OLED rotation by accel
#define MAX_TEMP_C 350 // Max soldering temp selectable °C
#define MAX_TEMP_F 660 // Max soldering temp selectable °F
#define MIN_TEMP_C 10 // Min soldering temp selectable °C
#define MIN_TEMP_F 50 // Min soldering temp selectable °F
#define MIN_BOOST_TEMP_C 150 // The min settable temp for boost mode °C
#define MIN_BOOST_TEMP_F 300 // The min settable temp for boost mode °F
#define NO_SLEEP_MODE
#define HARDWARE_MAX_WATTAGE_X10 850
#define TIP_THERMAL_MASS 10 // X10 watts to raise 1 deg C in 1 second
#define TIP_THERMAL_INERTIA 128 // We use a large inertia value to smooth out the drive to the tip since its stupidly sensitive
#define TIP_RESISTANCE 52 // PCB heater, measured at ~19C. Will shift by temp a decent amount
#define OLED_128x32
#define PROFILE_SUPPORT 1 // Soldering Profiles
#define OLED_128x32 1 // Larger OLED
#define OLED_FLIP 1 // Mounted upside down
#define POW_PD_EXT 1 // Older HUB238
#define USB_PD_EPR_WATTAGE 0 /*No EPR*/