sv/Marlin
1
1
Fork 0
Code Issues Pull Requests Wiki Activity

tweaks

Browse Source
This commit is contained in:
efflicto
2024-01-02 10:04:54 +01:00
parent a22d2f7bb1
commit 31411b121a
1 changed files with 11 additions and 11 deletions
Download Patch File Download Diff File Expand all files Collapse all files

22
Marlin/Configuration.h
View File

@@ -667,9 +667,9 @@
#define DEFAULT_Ki_LIST { 1.08, 1.08 } #define DEFAULT_Ki_LIST { 1.08, 1.08 }
#define DEFAULT_Kd_LIST { 114.00, 114.00 } #define DEFAULT_Kd_LIST { 114.00, 114.00 }
#else #else
#define DEFAULT_Kp 31.47 #define DEFAULT_Kp 21.98
#define DEFAULT_Ki 3.33 #define DEFAULT_Ki 2.59
#define DEFAULT_Kd 74.26 #define DEFAULT_Kd 46.62
#endif #endif
#endif #endif
@@ -752,9 +752,9 @@
// 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
// from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
#define DEFAULT_bedKp 81.28 #define DEFAULT_bedKp 68.68
#define DEFAULT_bedKi 15.88 #define DEFAULT_bedKi 13.40
#define DEFAULT_bedKd 277.45 #define DEFAULT_bedKd 234.69
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
#endif // PIDTEMPBED #endif // PIDTEMPBED
@@ -1188,7 +1188,7 @@
* Override with M201 * Override with M201
* X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]] * X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
*/ */
#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 150, 10000 } #define DEFAULT_MAX_ACCELERATION { 5000, 5000, 150, 10000 }
//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2
#if ENABLED(LIMITED_MAX_ACCEL_EDITING) #if ENABLED(LIMITED_MAX_ACCEL_EDITING)
@@ -1483,17 +1483,17 @@
* | [-] | * | [-] |
* O-- FRONT --+ * O-- FRONT --+
*/ */
#define NOZZLE_TO_PROBE_OFFSET { -33.50, -7.50, -2.035 } #define NOZZLE_TO_PROBE_OFFSET { -40.40, -9.00, -2.45 }
// Most probes should stay away from the edges of the bed, but // Most probes should stay away from the edges of the bed, but
// with NOZZLE_AS_PROBE this can be negative for a wider probing area. // with NOZZLE_AS_PROBE this can be negative for a wider probing area.
#define PROBING_MARGIN 15 #define PROBING_MARGIN 15
// X and Y axis travel speed (mm/min) between probes // X and Y axis travel speed (mm/min) between probes
#define XY_PROBE_FEEDRATE (100*60) #define XY_PROBE_FEEDRATE (150*60)
// Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2) // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2)
#define Z_PROBE_FEEDRATE_FAST (15*60) #define Z_PROBE_FEEDRATE_FAST (10*60)
// Feedrate (mm/min) for the "accurate" probe of each point // Feedrate (mm/min) for the "accurate" probe of each point
#define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 2) #define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 2)
@@ -1771,7 +1771,7 @@
* RAMPS-based boards use SERVO3_PIN for the first runout sensor. * RAMPS-based boards use SERVO3_PIN for the first runout sensor.
* For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc.
*/ */
//#define FILAMENT_RUNOUT_SENSOR #define FILAMENT_RUNOUT_SENSOR
#if ENABLED(FILAMENT_RUNOUT_SENSOR) #if ENABLED(FILAMENT_RUNOUT_SENSOR)
#define FIL_RUNOUT_ENABLED_DEFAULT false // Enable the sensor on startup. Override with M412 followed by M500. #define FIL_RUNOUT_ENABLED_DEFAULT false // Enable the sensor on startup. Override with M412 followed by M500.
#define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each.