sv/Marlin
1
1
Fork 0
Code Issues Pull Requests Wiki Activity

Tweaks

Browse Source
This commit is contained in:
efflicto
2023-12-26 17:11:15 +01:00
committed by Sven Soost
parent e6c84f6245
commit 1b742e6e01
2 changed files with 14 additions and 14 deletions
Download Patch File Download Diff File Expand all files Collapse all files

22
Marlin/Configuration.h
View File

@@ -627,7 +627,7 @@
#define HEATER_5_MAXTEMP 275
#define HEATER_6_MAXTEMP 275
#define HEATER_7_MAXTEMP 275
#define BED_MAXTEMP 60
#define BED_MAXTEMP 80
#define CHAMBER_MAXTEMP 60
/**
@@ -667,9 +667,9 @@
#define DEFAULT_Ki_LIST { 1.08, 1.08 }
#define DEFAULT_Kd_LIST { 114.00, 114.00 }
#else
#define DEFAULT_Kp 24.39
#define DEFAULT_Ki 2.29
#define DEFAULT_Kd 64.88
#define DEFAULT_Kp 29.19
#define DEFAULT_Ki 3.15
#define DEFAULT_Kd 67.73
#endif
#endif
@@ -752,9 +752,9 @@
// 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
// from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
#define DEFAULT_bedKp 95.54
#define DEFAULT_bedKi 18.66
#define DEFAULT_bedKd 326.13
#define DEFAULT_bedKp 53.46
#define DEFAULT_bedKi 7.77
#define DEFAULT_bedKd 245.18
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
#endif // PIDTEMPBED
@@ -1168,7 +1168,7 @@
* Override with M92
* X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
*/
#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 105.202 }
#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 100.671 }
/**
* Default Max Feed Rate (linear=mm/s, rotational=°/s)
@@ -1203,9 +1203,9 @@
* M204 R Retract Acceleration
* M204 T Travel Acceleration
*/
#define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves
#define DEFAULT_ACCELERATION 1500 // X, Y, Z and E acceleration for printing moves
#define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 500 // X, Y, Z acceleration for travel (non printing) moves
#define DEFAULT_TRAVEL_ACCELERATION 2000 // X, Y, Z acceleration for travel (non printing) moves
/**
* Default Jerk limits (mm/s)
@@ -1483,7 +1483,7 @@
* | [-] |
* O-- FRONT --+
*/
#define NOZZLE_TO_PROBE_OFFSET { -37.00, -12.00, -0.875 }
#define NOZZLE_TO_PROBE_OFFSET { -38.00, -10.00, -0.9 }
// Most probes should stay away from the edges of the bed, but
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.

6
Marlin/Configuration_adv.h
View File

@@ -1373,17 +1373,17 @@
//#define LCD_BACKLIGHT_TIMEOUT_MINS 1 // (minutes) Timeout before turning off the backlight
#if HAS_BED_PROBE && EITHER(HAS_MARLINUI_MENU, HAS_TFT_LVGL_UI)
//#define PROBE_OFFSET_WIZARD // Add a Probe Z Offset calibration option to the LCD menu
#define PROBE_OFFSET_WIZARD // Add a Probe Z Offset calibration option to the LCD menu
#if ENABLED(PROBE_OFFSET_WIZARD)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
//#define PROBE_OFFSET_WIZARD_START_Z -4.0
#define PROBE_OFFSET_WIZARD_START_Z -4.0
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance)
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#endif