47 lines
2.0 KiB
C
47 lines
2.0 KiB
C
/*
|
|
* Settings.h
|
|
*
|
|
* Created on: 29 Sep 2016
|
|
* Author: Ralim
|
|
*
|
|
* Houses the system settings and allows saving / restoring from flash
|
|
*/
|
|
|
|
#ifndef SETTINGS_H_
|
|
#define SETTINGS_H_
|
|
#include <stdint.h>
|
|
#include "stm32f1xx_hal.h"
|
|
#define SETTINGSVERSION 0x10 /*Change this if you change the struct below to prevent people getting out of sync*/
|
|
|
|
/*
|
|
* This struct must be a multiple of 2 bytes as it is saved / restored from flash in uint16_t chunks
|
|
*/
|
|
typedef struct {
|
|
uint16_t SolderingTemp; //current set point for the iron
|
|
uint16_t SleepTemp; //temp to drop to in sleep
|
|
uint8_t SleepTime; //minutes timeout to sleep
|
|
uint8_t cutoutSetting; // The voltage we cut out at for under voltage
|
|
uint8_t powerDisplay; //Toggle to swap the arrows with a power readout instead
|
|
uint8_t OrientationMode; //If true we want to invert the display for lefties
|
|
uint8_t sensitivity; //Sensitivity of accelerometer (5 bits)
|
|
uint8_t autoStartMode; //Should the unit automatically jump straight into soldering mode when power is applied
|
|
uint8_t ShutdownTime; //Time until unit shuts down if left alone
|
|
uint8_t boostModeEnabled; //Boost mode swaps BUT_A in soldering mode to temporary soldering temp over-ride
|
|
uint8_t coolingTempBlink; //Should the temperature blink on the cool down screen until its <50C
|
|
uint8_t advancedScreens; //If enabled we draw more detailed screens with smaller fonts
|
|
uint16_t voltageDiv; //Voltage divisor factor
|
|
uint16_t BoostTemp; //Boost mode set point for the iron
|
|
int16_t CalibrationOffset; //This stores the temperature offset for this tip in the iron.
|
|
uint8_t version; //Used to track if a reset is needed on firmware upgrade
|
|
uint32_t padding; //This is here for in case we are not an even divisor so that nothing gets cut off
|
|
} systemSettingsType;
|
|
|
|
extern systemSettingsType systemSettings;
|
|
|
|
void saveSettings();
|
|
void restoreSettings();
|
|
uint8_t lookupVoltageLevel(uint8_t level);
|
|
void resetSettings();
|
|
void showBootLogoIfavailable();
|
|
#endif /* SETTINGS_H_ */
|