sv/IronOS
1
0
Fork 0
forked from me/IronOS
Code Pull Requests Activity
Files
d75f361c4e274192dae5f7f1c16b7b46da296fbe
IronOS/workspace/TS100/Core/BSP/Miniware
History
Ben V. Brown 11e583be63 Fix interrupt race
2020-09-05 20:19:03 +10:00
..
Vendor
Shrink flash usage _just_ enough
2020-07-23 22:45:00 +10:00
BSP_PD.c
More accurate TS80P peak 12V current draw
2020-08-15 16:41:28 +10:00
BSP.cpp
Setup to basically always pick 5V
2020-08-02 16:18:32 +10:00
flash.c
Move I2C initalisations into more logical spots
2020-09-05 20:10:10 +10:00
fusb302b.cpp
Fix interrupt race
2020-09-05 20:19:03 +10:00
I2C_Wrapper.cpp
I2C wrapper cleanup
2020-09-05 20:04:07 +10:00
IRQ.cpp
Shrink flash usage _just_ enough
2020-07-23 22:45:00 +10:00
IRQ.h
IRQ int
2020-06-17 18:14:17 +10:00
logo.cpp
Make flash and bootloader sizes configurable
2020-08-26 11:53:47 +03:00
Model_Config.h
Cleanup model selection
2020-07-25 22:28:38 +10:00
Pins.h
Cleanup model selection
2020-07-25 22:28:38 +10:00
postRTOS.cpp
Move I2C initalisations into more logical spots
2020-09-05 20:10:10 +10:00
Power.cpp
Hold off QC until PD is done
2020-07-29 22:52:20 +10:00
preRTOS.cpp
Move I2C initalisations into more logical spots
2020-09-05 20:10:10 +10:00
QC_GPIO.cpp
Cleanup model selection
2020-07-25 22:28:38 +10:00
README.md
More shuffle
2020-05-29 21:39:12 +10:00
Setup.c
Move I2C initalisations into more logical spots
2020-09-05 20:10:10 +10:00
Setup.h
More shuffle
2020-05-29 21:39:12 +10:00
Software_I2C.h
Cleanup more unrequired logic
2020-07-28 22:27:14 +10:00
stm32f1xx_hal_msp.c
More shuffle
2020-05-29 21:39:12 +10:00
stm32f1xx_hal_timebase_TIM.c
More shuffle
2020-05-29 21:39:12 +10:00
stm32f1xx_it.c
Hook up IRQ
2020-06-17 18:22:43 +10:00
system_stm32f1xx.c
Make flash and bootloader sizes configurable
2020-08-26 11:53:47 +03:00

README.md

BSP section for STM32F103 based Miniware products

This folder contains the hardware abstractions required for the TS100, TS80 and probably TS80P soldering irons.

Main abstractions

  • Hardware Init
  • -> Should contain all bootstrap to bring the hardware up to an operating point
  • -> Two functions are required, a pre and post FreeRToS call
  • I2C read/write
  • Set PWM for the tip
  • Links between IRQ's on the system and the calls in the rest of the firmware
View Git Blame Copy Permalink