232 lines
6.0 KiB
Markdown
232 lines
6.0 KiB
Markdown
# Version Changes
|
|
|
|
## V2.16
|
|
|
|
* Overhaul of the Timer+ADC setup with help from @sandmanRO
|
|
* Overhaul of the PID with help from @sandmanRO
|
|
* Settings _should_ now upgrade in place to future versions, with resets only happening to new/changed settings
|
|
* Shows error if tip runaway (failed temperature sensor) is detected
|
|
* USB-PD now has a timeout, to allow forcing QC3 negotiation to start faster
|
|
* QC3 Voltages are now adjustable to user desired setpoint
|
|
* Added a small tolerance to allow "overvoltage" on QC3 above unit specifications.
|
|
* * Please note: Doing this is entirely at your own risk!
|
|
* New Advanced view that is much nicer to use and a very good daily driver option from @Mel-kior
|
|
* OLED brightness and contrast thanks to @alvinhochun
|
|
* Scrollbar is fixed so it doesnt jump around when menus are shown/hidden
|
|
* Moved to `.dfu` files from `.bin` to make flashing commands easier
|
|
* Every language had translation updates I believe
|
|
* Romanian language added
|
|
|
|
|
|
## V2.15
|
|
|
|
|
|
## Feature upgrades:
|
|
|
|
* MHP30 support
|
|
* Multi-lingual firmware combinations now exist for Pinecil
|
|
* More fine grained voltage controlled options
|
|
* USB-PD improvements (version one and two)
|
|
* More configuration options for power pulse
|
|
* All font / character encoding has been very reworked
|
|
* More translation updates than one can count
|
|
* More languages 😱
|
|
|
|
### MHP30
|
|
|
|
The MHP30 is a small reflow station from Miniware.
|
|
Thanks to a massive amount of help from @g3gg0 this firmware brings the beginnings of support for this unit.
|
|
Also kudo's to @Vinigas and @GoJian for helping with testing.
|
|
This is not a _final_ version I'm sure, but this is a working, usable version of firmware support.
|
|
Programs the same as any one Miniware unit using drag and drop.
|
|
**Note: The boot logo scripts will need updates for this unit, so not supported yet.**
|
|
|
|
The flood doors are now open for feature requests for this unit :)
|
|
|
|
## V2.14
|
|
|
|
- Fixing auto rotation bug in the LIS accelerometer in the TS80/TS80P
|
|
- Adds support for two new accelerometers
|
|
-- SC7A20 (Future Pinecil batch) #786
|
|
-- MSA301 (Newer TS80P) #761
|
|
- Add warnings if accelerometer or USB-PD IC's are not detected #752
|
|
-- Only shows for first few boots, to help catch unsupported models
|
|
- Fixed cooling down blink to be sane speed #769
|
|
- Cleanup of threads and slightly faster power negotiation #790
|
|
|
|
- Updates to flashing scripts #775
|
|
- Documentation updates all over the place (and the wiki was given a cleanup)|
|
|
- Updates to makefile #792 #787
|
|
- Cleanup the folder name of the source code #800
|
|
- clang-format spec setup #801
|
|
|
|
## V2.13
|
|
|
|
- First _official_ Pinecil release
|
|
- All of the wire for Pinecil releases added
|
|
- Updated Translations
|
|
- Delay accelerometer to help with entering sleep on startup
|
|
- Dual speed PWM to help with power limit control
|
|
- Improve heat up time
|
|
- Adds locking mode
|
|
- Improved docs all over the place
|
|
- Repo rename occured TS100 -> IronOS
|
|
- Hall effect sensor support added (not fitted in Pinecil but optional)
|
|
- QC 20V support for Pinecil
|
|
- CI upgrades for faster builds
|
|
- Fixed bug with accelerometer model on Pinecil
|
|
- Rework of all of the temperature curves for better accuracy
|
|
|
|
## V2.12
|
|
|
|
- Only released as pre-release
|
|
- [TS80P] Improvements to the PD negotiation to handle a few more adapters cleanly
|
|
- Pause on the last item in a list
|
|
- Clean up the menu (removed both enables and settings, so that you can turn things off easier)
|
|
- Removing the very old single line menu style.
|
|
|
|
## V2.11
|
|
|
|
- First TS80P support
|
|
- Added in a USB-PD driver stack for the FUSB302
|
|
- Fixed some graphical glitches
|
|
|
|
## V2.10
|
|
|
|
- GUI polish (animations and scroll bars)
|
|
- Power pulse to keep power supplies alive
|
|
- Adjustable tip response gain
|
|
|
|
## V2.09
|
|
|
|
- Adjustable steps in temperature adjustment
|
|
- Git hash now in build string
|
|
- Adjustable language to set if US units are available or not
|
|
- Some minor QC3 improvements
|
|
|
|
## V2.08
|
|
|
|
- Fixes auto start in sleep mode
|
|
- Power limiters
|
|
|
|
## V2.07
|
|
|
|
- QC fixes
|
|
- Cosmetic fixes for leading 0's
|
|
|
|
## V2.06
|
|
|
|
- Warning on settings reset
|
|
- Temp temp re-write
|
|
- Display calibration offset
|
|
- Hide some leading 0's
|
|
- Menu timeouts
|
|
|
|
## V2.05
|
|
|
|
- Language updates
|
|
|
|
## V2.04
|
|
|
|
- GUI updates
|
|
|
|
## V2.03
|
|
|
|
- Support for new accelerometers
|
|
|
|
## V2.02
|
|
|
|
- Adds small font
|
|
|
|
## V2.01
|
|
|
|
- Newer settings menu
|
|
|
|
## V2.00
|
|
|
|
- Complete re-write of the low layer system to use the STM32 HAL for easier development
|
|
- This allowed easier setup for the new ADC auto measuring system
|
|
- Better tip PWM control
|
|
- Moved to FreeRTOS for scheduling
|
|
- Complete re-write from blank
|
|
- Added detailed screen views
|
|
- Added smaller font for said screen views
|
|
|
|
## V1.17
|
|
|
|
- Added blinking cooldown display
|
|
- Allowed smaller sleep timeout values
|
|
- New font!
|
|
- Automatic startup option
|
|
|
|
## V1.16
|
|
|
|
- Added automatic rotation support
|
|
- Added power display graph
|
|
|
|
## V1.15
|
|
|
|
- Added support for a custom bootup logo to be programmed via the DFU bootloader
|
|
|
|
## V1.14
|
|
|
|
- Changed input voltage cutoff to be based on cell count rather than voltage
|
|
|
|
## V1.13
|
|
|
|
- Swapped buttons for menu to prevent accidentally changing first menu item
|
|
- Added auto key repeat
|
|
|
|
## V1.12
|
|
|
|
- Increases sensitivity options to be 1\*9 with 0 off state
|
|
- Fixes issue where going from COOL \*> soldering can leave screen off
|
|
|
|
## V1.11
|
|
|
|
- Boost mode
|
|
- Change sensitivity options to be 1\*8
|
|
|
|
## V1.10
|
|
|
|
- Adds help text to settings
|
|
- Improves settings for the display update rate
|
|
|
|
## V1.09
|
|
|
|
- Adds display modes, for slowing down or simplifying the display
|
|
|
|
## V1.08
|
|
|
|
- Fix settings menu not showing flip display
|
|
|
|
## V1.07
|
|
|
|
- Adds shutdown time to automatically shutdown the iron after inactivity
|
|
|
|
## V1.06
|
|
|
|
- Changes H and C when the iron is heating to the minidso chevron like images
|
|
|
|
## V1.05
|
|
|
|
- Adds ability to calibrate the input voltage measurement
|
|
|
|
## V1.04
|
|
|
|
- Increased accuracy of the temperature control
|
|
- Improved PID response slightly
|
|
- Allows temperature offset calibration
|
|
- Nicer idle screen
|
|
|
|
## V1.03
|
|
|
|
- Improved Button handling
|
|
- Ability to set motion sensitivity
|
|
- DC voltmeter page shows input voltage
|
|
|
|
## V1.02
|
|
|
|
- Adds hold both buttons on IDLE to access the therometer mode
|
|
- Changes the exit soldering mode to be holding both buttons (Like original firmware)
|