sv/IronOS
1
0
Fork 0
forked from me/IronOS
Code Pull Requests Activity
Files
b23fae6f51a36b3ddc96773fbbfe1270778316a1
IronOS/workspace/TS100/Core/BSP/Miniware
History
Ben V. Brown 627c491998 Fix broken ADC sampling was ignoring ADC2 readings
2020-12-28 15:59:43 +11:00
..
Vendor
Shrink flash usage _just_ enough
2020-07-23 22:45:00 +10:00
BSP_PD.c
More accurate TS80P peak 12V current draw
2020-08-15 16:41:28 +10:00
BSP.cpp
Fix PWM sometimes stepping on end of ADC
2020-12-28 15:59:03 +11:00
flash.c
Bulk format
2020-10-13 19:04:16 +11:00
FreeRTOSConfig.h
Further work on Pinecil compile
2020-08-18 18:58:00 +10:00
fusb302b.cpp
Bulk format
2020-10-13 19:04:16 +11:00
I2C_Wrapper.cpp
Bulk format
2020-10-13 19:04:16 +11:00
IRQ.cpp
Bulk format
2020-10-13 19:04:16 +11:00
IRQ.h
IRQ int
2020-06-17 18:14:17 +10:00
logo.cpp
Bulk format
2020-10-13 19:04:16 +11:00
Model_Config.h
Split DC input and QC from being an OR :)
2020-11-01 14:28:12 +11:00
Pins.h
Fix broken ADC sampling was ignoring ADC2 readings
2020-12-28 15:59:43 +11:00
port.c
Bulk format
2020-10-13 19:04:16 +11:00
portmacro.h
Bulk format
2020-10-13 19:04:16 +11:00
postRTOS.cpp
Move I2C initalisations into more logical spots
2020-09-05 20:10:10 +10:00
Power.cpp
Fix QC 20V support
2020-11-01 15:42:36 +11:00
preRTOS.cpp
Introduce PWM freq switching so that power could be averaged on shorter intervals
2020-09-29 19:02:55 +03:00
QC_GPIO.cpp
Update QC_GPIO.cpp
2020-11-01 14:52:55 +11:00
README.md
More shuffle
2020-05-29 21:39:12 +10:00
Setup.c
Fix broken ADC sampling was ignoring ADC2 readings
2020-12-28 15:59:43 +11:00
Setup.h
More shuffle
2020-05-29 21:39:12 +10:00
Software_I2C.h
Bulk format
2020-10-13 19:04:16 +11:00
stm32f1xx_hal_msp.c
Fix broken ADC sampling was ignoring ADC2 readings
2020-12-28 15:59:43 +11:00
stm32f1xx_hal_timebase_TIM.c
Bulk format
2020-10-13 19:04:16 +11:00
stm32f1xx_it.c
Bulk format
2020-10-13 19:04:16 +11:00
system_stm32f1xx.c
Bulk format
2020-10-13 19:04:16 +11:00

README.md

BSP section for STM32F103 based Miniware products

This folder contains the hardware abstractions required for the TS100, TS80 and probably TS80P soldering irons.

Main abstractions

  • Hardware Init
  • -> Should contain all bootstrap to bring the hardware up to an operating point
  • -> Two functions are required, a pre and post FreeRToS call
  • I2C read/write
  • Set PWM for the tip
  • Links between IRQ's on the system and the calls in the rest of the firmware
View Git Blame Copy Permalink