sv/IronOS
1
0
Fork 0
forked from me/IronOS
Code Pull Requests Activity
Files
a5975b3385a00c8385f7699151b6ccbc4c0acacd
IronOS/source/Core/BSP/Miniware
History
discip a5975b3385 Update Power.cpp
2022-05-04 00:13:46 +02:00
..
Vendor
Bootup logo settings (#1241)
2022-04-02 12:39:14 +11:00
BSP.cpp
Bugfix: Only change speed of pwm at end of cycle interrupt
2022-02-05 10:23:56 +11:00
configuration.h
Logo rework (#1232)
2022-03-14 09:08:05 +11:00
flash.c
Cleanup security warnings
2021-03-17 21:12:45 +11:00
FreeRTOSConfig.h
Correct a few missed time values from the tick rate change (#874)
2021-03-15 21:01:09 +11:00
fusb_user.cpp
Fixes for I2C on Pinecil + USB-PD stack (#1099)
2021-10-02 14:48:58 +10:00
I2C_Wrapper.cpp
use IRQ mode
2022-01-30 13:30:44 +11:00
IRQ.cpp
Fixes for I2C on Pinecil + USB-PD stack (#1099)
2021-10-02 14:48:58 +10:00
IRQ.h
Format headers
2021-01-17 10:53:49 +11:00
Pins.h
Fixes for I2C on Pinecil + USB-PD stack (#1099)
2021-10-02 14:48:58 +10:00
port.c
Formatting the C/C++ files
2021-01-17 10:48:52 +11:00
portmacro.h
Format headers
2021-01-17 10:53:49 +11:00
postRTOS.cpp
Fixes for I2C on Pinecil + USB-PD stack (#1099)
2021-10-02 14:48:58 +10:00
Power.cpp
Update Power.cpp
2022-05-04 00:13:46 +02:00
preRTOS.cpp
Fixes for I2C on Pinecil + USB-PD stack (#1099)
2021-10-02 14:48:58 +10:00
QC_GPIO.cpp
Rough pass
2021-09-17 21:13:21 +10:00
README.md
./workspace/TS100 -> ./source/
2021-01-17 09:43:55 +11:00
Setup.cpp
QC code does not get control of vin filter
2021-09-14 22:01:10 +10:00
Setup.h
Reworking raw adc, handle temp done
2021-09-11 22:25:57 +10:00
Software_I2C.h
Fixes for I2C on Pinecil + USB-PD stack (#1099)
2021-10-02 14:48:58 +10:00
stm32f1xx_hal_msp.c
use IRQ mode
2022-01-30 13:30:44 +11:00
stm32f1xx_hal_timebase_TIM.c
Formatting the C/C++ files
2021-01-17 10:48:52 +11:00
stm32f1xx_it.c
Formatting the C/C++ files
2021-01-17 10:48:52 +11:00
stm32f103.ld
Move ld file into bsp
2021-04-27 21:44:21 +10:00
system_stm32f1xx.c
Formatting the C/C++ files
2021-01-17 10:48:52 +11:00
ThermoModel.cpp
Create isTipDisconnected function
2021-05-01 16:44:50 +10:00

README.md

BSP section for STM32F103 based Miniware products

This folder contains the hardware abstractions required for the TS100, TS80 and probably TS80P soldering irons.

Main abstractions

  • Hardware Init
  • -> Should contain all bootstrap to bring the hardware up to an operating point
  • -> Two functions are required, a pre and post FreeRToS call
  • I2C read/write
  • Set PWM for the tip
  • Links between IRQ's on the system and the calls in the rest of the firmware
View Git Blame Copy Permalink