sv/IronOS
1
0
Fork 0
forked from me/IronOS
Code Pull Requests Activity
Files
849b266d4e6f0530b0727704a2a35a5135252766
IronOS/source/Core/BSP/Miniware
History
Ben V. Brown 849b266d4e Shrink HAL
2022-10-22 11:24:29 +11:00
..
Vendor
Shrink HAL
2022-10-22 11:24:29 +11:00
BSP.cpp
Fixing up TS80P Build (#1429)
2022-10-20 18:06:05 +11:00
configuration.h
Pinecil V2 (#1341)
2022-08-19 15:39:37 +10:00
flash.c
flash api simpler
2022-10-22 11:24:09 +11:00
FreeRTOSConfig.h
Update portmacro
2022-07-25 16:56:37 +10:00
fusb_user.cpp
Fixes for I2C on Pinecil + USB-PD stack (#1099)
2021-10-02 14:48:58 +10:00
I2C_Wrapper.cpp
use IRQ mode
2022-01-30 13:30:44 +11:00
IRQ.cpp
Fixes for I2C on Pinecil + USB-PD stack (#1099)
2021-10-02 14:48:58 +10:00
IRQ.h
Format headers
2021-01-17 10:53:49 +11:00
Pins.h
Update Pins.h
2022-05-04 00:10:44 +02:00
port.c
Trimming Miniware
2022-10-22 11:17:27 +11:00
portmacro.h
Update portmacro
2022-07-25 16:56:37 +10:00
postRTOS.cpp
Fixes for I2C on Pinecil + USB-PD stack (#1099)
2021-10-02 14:48:58 +10:00
Power.cpp
Update Power.cpp
2022-05-04 00:13:46 +02:00
preRTOS.cpp
Fixes for I2C on Pinecil + USB-PD stack (#1099)
2021-10-02 14:48:58 +10:00
QC_GPIO.cpp
Rough pass
2021-09-17 21:13:21 +10:00
README.md
./workspace/TS100 -> ./source/
2021-01-17 09:43:55 +11:00
Setup.cpp
QC code does not get control of vin filter
2021-09-14 22:01:10 +10:00
Setup.h
Reworking raw adc, handle temp done
2021-09-11 22:25:57 +10:00
Software_I2C.h
Fixes for I2C on Pinecil + USB-PD stack (#1099)
2021-10-02 14:48:58 +10:00
stm32f1xx_hal_msp.c
use IRQ mode
2022-01-30 13:30:44 +11:00
stm32f1xx_hal_timebase_TIM.c
Formatting the C/C++ files
2021-01-17 10:48:52 +11:00
stm32f1xx_it.c
Shrink HAL
2022-10-22 11:24:29 +11:00
stm32f103.ld
Fixing up TS80P Build (#1429)
2022-10-20 18:06:05 +11:00
system_stm32f1xx.c
Formatting the C/C++ files
2021-01-17 10:48:52 +11:00
ThermoModel.cpp
Pinecil V2 (#1341)
2022-08-19 15:39:37 +10:00

README.md

BSP section for STM32F103 based Miniware products

This folder contains the hardware abstractions required for the TS100, TS80 and probably TS80P soldering irons.

Main abstractions

  • Hardware Init
  • -> Should contain all bootstrap to bring the hardware up to an operating point
  • -> Two functions are required, a pre and post FreeRToS call
  • I2C read/write
  • Set PWM for the tip
  • Links between IRQ's on the system and the calls in the rest of the firmware
View Git Blame Copy Permalink