286afad919
* Mock S60 * cleanup * Start refactor of OLED init * Setup timers roughly * Set Vector table offset correctly Update system_stm32f1xx.c * Update OLED.cpp * Update stm32f1xx_hal_msp.c * Update configuration.h * I2C init before GPIO From Errata Update stm32f1xx_hal_msp.c Update Software_I2C.h Allow no hardware I2C * I2C BB run bus unlock at init * cleanups * Software I2C for now * Mildly more graceful Interpolate * Handle is powered by DC Update Power.cpp Update drawPowerSourceIcon.cpp Update configuration.h Update Setup.cpp * Cleanup HomeScreen * Segment remap oled at init * Cleanup * Update MOVThread.cpp * Fix PWM Init * Fix adc2 trigger * Update configs * Fixup warning * Saner default config * Update ThermoModel.cpp * Util for current@voltage * Hub238 warning * Add hub238 handling in power mode * Update USBPDDebug_FUSB.cpp * HUSB238 debug * Hook PSU Limit * Use wrapping section of GRAM for scroll Update OLED.hpp * Update NTC table * Fix HUB voltage picker * Cleanup * Larger tip filter * Calibrate in a bunch closer Update ThermoModel.cpp * Update configuration.h * Update HUB238.cpp * Update configuration.h * Movement Pin * Update BSP.cpp * tim2 irq * Rough timer conversion (adc broken) but movement working * Fix tim2 start * Faster base PWM * Ensure utils grabs config * Add wattage limiter tolerance for device * Speed up PWM and enable PWM current limiting * tune for 12v * Prevent start until PD done * Update configuration.h * Add HUB238 check for have re-negotiated * Adjust timer to avoid noise when its possible
39 lines
856 B
C
39 lines
856 B
C
/*
|
|
* Setup.h
|
|
*
|
|
* Created on: 29Aug.,2017
|
|
* Author: Ben V. Brown
|
|
*/
|
|
|
|
#ifndef SETUP_H_
|
|
#define SETUP_H_
|
|
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif
|
|
|
|
#include "stm32f1xx_hal.h"
|
|
|
|
extern ADC_HandleTypeDef hadc1;
|
|
extern ADC_HandleTypeDef hadc2;
|
|
extern DMA_HandleTypeDef hdma_adc1;
|
|
|
|
extern DMA_HandleTypeDef hdma_i2c1_rx;
|
|
extern DMA_HandleTypeDef hdma_i2c1_tx;
|
|
extern I2C_HandleTypeDef hi2c1;
|
|
|
|
extern IWDG_HandleTypeDef hiwdg;
|
|
|
|
extern TIM_HandleTypeDef htim4;
|
|
extern TIM_HandleTypeDef htim2;
|
|
void Setup_HAL();
|
|
uint16_t getADCHandleTemp(uint8_t sample);
|
|
uint16_t getADCVin(uint8_t sample);
|
|
void HAL_TIM_MspPostInit(TIM_HandleTypeDef *htim); // Since the hal header file does not define this one
|
|
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
|
|
#endif /* SETUP_H_ */
|