Try and re-tune TS100 and TS80

Feature that adds auto font creation

.gitignore

@@ -44,3 +44,12 @@ workspace/ts100/ts100.xml
 workspace/ts100_old/*
 *.cache
 workspace/TS100/.settings/language.settings.xml
+workspace/TS100A/Release/TS100A.map
+workspace/TS100A/Release/TS100A.list
+workspace/TS100A/Release/TS100A.hex
+workspace/TS100A/.settings/language.settings.xml
+workspace/TS100A/.metadata/
+Translation Editor/.vscode/
+Translation Editor/__pycache__/
+*.pyc
+workspace/TS100/src/Translation.cpp

Bootup Logo/Logos/001_TS80.hex

@@ -0,0 +1,258 @@
+:020000040800F2
+:10F8000055AA0DF07FFFD5AB7DEA7F7E7F7FFF7F1E
+:10F81000FFFFFFFFFFFFFFFFFFFFFFFFFFFF7FFF78
+:10F820007F7FBFBFDFBFEFDF0FEFEF0FAFAFAFAF38
+:10F83000EFEFAFAFAFAFAFAF0FEF6FEFAFAFAFAFB8
+:10F84000AFAF2FAFAFAFAFAFAFAF6FAF6FEFAFAF88
+:10F85000AFAFAFAFAFAFAFAFAFAFAFAFAFAFAFAFB8
+:10F86000EF6FFF1FFDFFFAFDF7FAF7F7F7F7FAF76B
+:10F87000FAFAFAFAFAFAFAFAFAFAFAFAFAFAF0FAF2
+:10F88000F7F7EFEFDFEFBFDF80BFBF80AAAAAAAA1A
+:10F89000BFBFAAAAAAAAAAAA80BFB0BFADAFAAAA90
+:10F8A000ADAFA2AAADAAAAAFADAAB0AFB0BFAFAF7D
+:10F8B000AFAFAFAFAFAFAFAFAFAFAFAFAFAFAFAF58
+:10F8C000BFB0FFC00000000000000000000000000A
+:10F8D0000000000000000000000000000000000028
+:10F8E0000000000000000000000000000000000018
+:10F8F0000000000000000000000000000000000008
+:10F9000000000000000000000000000000000000F7
+:10F9100000000000000000000000000000000000E7
+:10F9200000000000000000000000000000000000D7
+:10F9300000000000000000000000000000000000C7
+:10F9400000000000000000000000000000000000B7
+:10F9500000000000000000000000000000000000A7
+:10F960000000000000000000000000000000000097
+:10F970000000000000000000000000000000000087
+:10F980000000000000000000000000000000000077
+:10F990000000000000000000000000000000000067
+:10F9A0000000000000000000000000000000000057
+:10F9B0000000000000000000000000000000000047
+:10F9C0000000000000000000000000000000000037
+:10F9D0000000000000000000000000000000000027
+:10F9E0000000000000000000000000000000000017
+:10F9F0000000000000000000000000000000000007
+:10FA000000000000000000000000000000000000F6
+:10FA100000000000000000000000000000000000E6
+:10FA200000000000000000000000000000000000D6
+:10FA300000000000000000000000000000000000C6
+:10FA400000000000000000000000000000000000B6
+:10FA500000000000000000000000000000000000A6
+:10FA60000000000000000000000000000000000096
+:10FA70000000000000000000000000000000000086
+:10FA80000000000000000000000000000000000076
+:10FA90000000000000000000000000000000000066
+:10FAA0000000000000000000000000000000000056
+:10FAB0000000000000000000000000000000000046
+:10FAC0000000000000000000000000000000000036
+:10FAD0000000000000000000000000000000000026
+:10FAE0000000000000000000000000000000000016
+:10FAF0000000000000000000000000000000000006
+:10FB000000000000000000000000000000000000F5
+:10FB100000000000000000000000000000000000E5
+:10FB200000000000000000000000000000000000D5
+:10FB300000000000000000000000000000000000C5
+:10FB400000000000000000000000000000000000B5
+:10FB500000000000000000000000000000000000A5
+:10FB60000000000000000000000000000000000095
+:10FB70000000000000000000000000000000000085
+:10FB80000000000000000000000000000000000075
+:10FB90000000000000000000000000000000000065
+:10FBA0000000000000000000000000000000000055
+:10FBB0000000000000000000000000000000000045
+:10FBC0000000000000000000000000000000000035
+:10FBD0000000000000000000000000000000000025
+:10FBE0000000000000000000000000000000000015
+:10FBF0000000000000000000000000000000000005
+:10F8000055AA0DF07FFFD5AB7DEA7F7E7F7FFF7F1E
+:10F81000FFFFFFFFFFFFFFFFFFFFFFFFFFFF7FFF78
+:10F820007F7FBFBFDFBFEFDF0FEFEF0FAFAFAFAF38
+:10F83000EFEFAFAFAFAFAFAF0FEF6FEFAFAFAFAFB8
+:10F84000AFAF2FAFAFAFAFAFAFAF6FAF6FEFAFAF88
+:10F85000AFAFAFAFAFAFAFAFAFAFAFAFAFAFAFAFB8
+:10F86000EF6FFF1FFDFFFAFDF7FAF7F7F7F7FAF76B
+:10F87000FAFAFAFAFAFAFAFAFAFAFAFAFAFAF0FAF2
+:10F88000F7F7EFEFDFEFBFDF80BFBF80AAAAAAAA1A
+:10F89000BFBFAAAAAAAAAAAA80BFB0BFADAFAAAA90
+:10F8A000ADAFA2AAADAAAAAFADAAB0AFB0BFAFAF7D
+:10F8B000AFAFAFAFAFAFAFAFAFAFAFAFAFAFAFAF58
+:10F8C000BFB0FFC00000000000000000000000000A
+:10F8D0000000000000000000000000000000000028
+:10F8E0000000000000000000000000000000000018
+:10F8F0000000000000000000000000000000000008
+:10F9000000000000000000000000000000000000F7
+:10F9100000000000000000000000000000000000E7
+:10F9200000000000000000000000000000000000D7
+:10F9300000000000000000000000000000000000C7
+:10F9400000000000000000000000000000000000B7
+:10F9500000000000000000000000000000000000A7
+:10F960000000000000000000000000000000000097
+:10F970000000000000000000000000000000000087
+:10F980000000000000000000000000000000000077
+:10F990000000000000000000000000000000000067
+:10F9A0000000000000000000000000000000000057
+:10F9B0000000000000000000000000000000000047
+:10F9C0000000000000000000000000000000000037
+:10F9D0000000000000000000000000000000000027
+:10F9E0000000000000000000000000000000000017
+:10F9F0000000000000000000000000000000000007
+:10FA000000000000000000000000000000000000F6
+:10FA100000000000000000000000000000000000E6
+:10FA200000000000000000000000000000000000D6
+:10FA300000000000000000000000000000000000C6
+:10FA400000000000000000000000000000000000B6
+:10FA500000000000000000000000000000000000A6
+:10FA60000000000000000000000000000000000096
+:10FA70000000000000000000000000000000000086
+:10FA80000000000000000000000000000000000076
+:10FA90000000000000000000000000000000000066
+:10FAA0000000000000000000000000000000000056
+:10FAB0000000000000000000000000000000000046
+:10FAC0000000000000000000000000000000000036
+:10FAD0000000000000000000000000000000000026
+:10FAE0000000000000000000000000000000000016
+:10FAF0000000000000000000000000000000000006
+:10FB000000000000000000000000000000000000F5
+:10FB100000000000000000000000000000000000E5
+:10FB200000000000000000000000000000000000D5
+:10FB300000000000000000000000000000000000C5
+:10FB400000000000000000000000000000000000B5
+:10FB500000000000000000000000000000000000A5
+:10FB60000000000000000000000000000000000095
+:10FB70000000000000000000000000000000000085
+:10FB80000000000000000000000000000000000075
+:10FB90000000000000000000000000000000000065
+:10FBA0000000000000000000000000000000000055
+:10FBB0000000000000000000000000000000000045
+:10FBC0000000000000000000000000000000000035
+:10FBD0000000000000000000000000000000000025
+:10FBE0000000000000000000000000000000000015
+:10FBF0000000000000000000000000000000000005
+:10F8000055AA0DF07FFFD5AB7DEA7F7E7F7FFF7F1E
+:10F81000FFFFFFFFFFFFFFFFFFFFFFFFFFFF7FFF78
+:10F820007F7FBFBFDFBFEFDF0FEFEF0FAFAFAFAF38
+:10F83000EFEFAFAFAFAFAFAF0FEF6FEFAFAFAFAFB8
+:10F84000AFAF2FAFAFAFAFAFAFAF6FAF6FEFAFAF88
+:10F85000AFAFAFAFAFAFAFAFAFAFAFAFAFAFAFAFB8
+:10F86000EF6FFF1FFDFFFAFDF7FAF7F7F7F7FAF76B
+:10F87000FAFAFAFAFAFAFAFAFAFAFAFAFAFAF0FAF2
+:10F88000F7F7EFEFDFEFBFDF80BFBF80AAAAAAAA1A
+:10F89000BFBFAAAAAAAAAAAA80BFB0BFADAFAAAA90
+:10F8A000ADAFA2AAADAAAAAFADAAB0AFB0BFAFAF7D
+:10F8B000AFAFAFAFAFAFAFAFAFAFAFAFAFAFAFAF58
+:10F8C000BFB0FFC00000000000000000000000000A
+:10F8D0000000000000000000000000000000000028
+:10F8E0000000000000000000000000000000000018
+:10F8F0000000000000000000000000000000000008
+:10F9000000000000000000000000000000000000F7
+:10F9100000000000000000000000000000000000E7
+:10F9200000000000000000000000000000000000D7
+:10F9300000000000000000000000000000000000C7
+:10F9400000000000000000000000000000000000B7
+:10F9500000000000000000000000000000000000A7
+:10F960000000000000000000000000000000000097
+:10F970000000000000000000000000000000000087
+:10F980000000000000000000000000000000000077
+:10F990000000000000000000000000000000000067
+:10F9A0000000000000000000000000000000000057
+:10F9B0000000000000000000000000000000000047
+:10F9C0000000000000000000000000000000000037
+:10F9D0000000000000000000000000000000000027
+:10F9E0000000000000000000000000000000000017
+:10F9F0000000000000000000000000000000000007
+:10FA000000000000000000000000000000000000F6
+:10FA100000000000000000000000000000000000E6
+:10FA200000000000000000000000000000000000D6
+:10FA300000000000000000000000000000000000C6
+:10FA400000000000000000000000000000000000B6
+:10FA500000000000000000000000000000000000A6
+:10FA60000000000000000000000000000000000096
+:10FA70000000000000000000000000000000000086
+:10FA80000000000000000000000000000000000076
+:10FA90000000000000000000000000000000000066
+:10FAA0000000000000000000000000000000000056
+:10FAB0000000000000000000000000000000000046
+:10FAC0000000000000000000000000000000000036
+:10FAD0000000000000000000000000000000000026
+:10FAE0000000000000000000000000000000000016
+:10FAF0000000000000000000000000000000000006
+:10FB000000000000000000000000000000000000F5
+:10FB100000000000000000000000000000000000E5
+:10FB200000000000000000000000000000000000D5
+:10FB300000000000000000000000000000000000C5
+:10FB400000000000000000000000000000000000B5
+:10FB500000000000000000000000000000000000A5
+:10FB60000000000000000000000000000000000095
+:10FB70000000000000000000000000000000000085
+:10FB80000000000000000000000000000000000075
+:10FB90000000000000000000000000000000000065
+:10FBA0000000000000000000000000000000000055
+:10FBB0000000000000000000000000000000000045
+:10FBC0000000000000000000000000000000000035
+:10FBD0000000000000000000000000000000000025
+:10FBE0000000000000000000000000000000000015
+:10FBF0000000000000000000000000000000000005
+:10F8000055AA0DF07FFFD5AB7DEA7F7E7F7FFF7F1E
+:10F81000FFFFFFFFFFFFFFFFFFFFFFFFFFFF7FFF78
+:10F820007F7FBFBFDFBFEFDF0FEFEF0FAFAFAFAF38
+:10F83000EFEFAFAFAFAFAFAF0FEF6FEFAFAFAFAFB8
+:10F84000AFAF2FAFAFAFAFAFAFAF6FAF6FEFAFAF88
+:10F85000AFAFAFAFAFAFAFAFAFAFAFAFAFAFAFAFB8
+:10F86000EF6FFF1FFDFFFAFDF7FAF7F7F7F7FAF76B
+:10F87000FAFAFAFAFAFAFAFAFAFAFAFAFAFAF0FAF2
+:10F88000F7F7EFEFDFEFBFDF80BFBF80AAAAAAAA1A
+:10F89000BFBFAAAAAAAAAAAA80BFB0BFADAFAAAA90
+:10F8A000ADAFA2AAADAAAAAFADAAB0AFB0BFAFAF7D
+:10F8B000AFAFAFAFAFAFAFAFAFAFAFAFAFAFAFAF58
+:10F8C000BFB0FFC00000000000000000000000000A
+:10F8D0000000000000000000000000000000000028
+:10F8E0000000000000000000000000000000000018
+:10F8F0000000000000000000000000000000000008
+:10F9000000000000000000000000000000000000F7
+:10F9100000000000000000000000000000000000E7
+:10F9200000000000000000000000000000000000D7
+:10F9300000000000000000000000000000000000C7
+:10F9400000000000000000000000000000000000B7
+:10F9500000000000000000000000000000000000A7
+:10F960000000000000000000000000000000000097
+:10F970000000000000000000000000000000000087
+:10F980000000000000000000000000000000000077
+:10F990000000000000000000000000000000000067
+:10F9A0000000000000000000000000000000000057
+:10F9B0000000000000000000000000000000000047
+:10F9C0000000000000000000000000000000000037
+:10F9D0000000000000000000000000000000000027
+:10F9E0000000000000000000000000000000000017
+:10F9F0000000000000000000000000000000000007
+:10FA000000000000000000000000000000000000F6
+:10FA100000000000000000000000000000000000E6
+:10FA200000000000000000000000000000000000D6
+:10FA300000000000000000000000000000000000C6
+:10FA400000000000000000000000000000000000B6
+:10FA500000000000000000000000000000000000A6
+:10FA60000000000000000000000000000000000096
+:10FA70000000000000000000000000000000000086
+:10FA80000000000000000000000000000000000076
+:10FA90000000000000000000000000000000000066
+:10FAA0000000000000000000000000000000000056
+:10FAB0000000000000000000000000000000000046
+:10FAC0000000000000000000000000000000000036
+:10FAD0000000000000000000000000000000000026
+:10FAE0000000000000000000000000000000000016
+:10FAF0000000000000000000000000000000000006
+:10FB000000000000000000000000000000000000F5
+:10FB100000000000000000000000000000000000E5
+:10FB200000000000000000000000000000000000D5
+:10FB300000000000000000000000000000000000C5
+:10FB400000000000000000000000000000000000B5
+:10FB500000000000000000000000000000000000A5
+:10FB60000000000000000000000000000000000095
+:10FB70000000000000000000000000000000000085
+:10FB80000000000000000000000000000000000075
+:10FB90000000000000000000000000000000000065
+:10FBA0000000000000000000000000000000000055
+:10FBB0000000000000000000000000000000000045
+:10FBC0000000000000000000000000000000000035
+:10FBD0000000000000000000000000000000000025
+:10FBE0000000000000000000000000000000000015
+:10FBF0000000000000000000000000000000000005
+:00000001FF

Bootup Logo/python_logo_converter/img2ts100.py

@@ -8,7 +8,7 @@ import sys
 try:
     from PIL import Image, ImageOps
 except ImportError as error:
-    raise ImportError("{}: {} requres Python Imaging Library (PIL). " 
+    raise ImportError("{}: {} requres Python Imaging Library (PIL). "
                       "Install with `pip` or OS-specific package "
                       "management tool."
                       .format(error, sys.argv[0]))
@@ -32,28 +32,32 @@ def split16(word):
     return (word >> 8) & 0xff, word & 0xff
 
 
-def intel_hex_line(file, record_type, offset, data):
-    """write a line of data in Intel hex format"""
+def intel_hex_line(record_type, offset, data):
+    """generate a line of data in Intel hex format"""
     # length, address offset, record type
     record_length = len(data)
-    file.write(':{:02X}{:04X}{:02X}'.format(record_length, offset, record_type))
+    yield ':{:02X}{:04X}{:02X}'.format(record_length, offset, record_type)
 
     # data
-    map(lambda byte: file.write("{:02X}".format(byte)), data)
+    for byte in data:
+        yield "{:02X}".format(byte)
 
     # compute and write checksum (with DOS line ending for compatibility/safety)
-    file.write("{:02X}\r\n"
-               .format(((sum(data,                   # sum data ...
-                             record_length           # ... and other ...
-                             + sum(split16(offset))  # ... fields ...
-                             + record_type)          # ... on line
-                         & 0xff)                     # low 8 bits
-                        ^ 0xff)                      # two's ...
-                       + 1))                         # ... complement
+    yield "{:02X}\r\n".format((((sum(data,                   # sum data ...
+                                     record_length           # ... and other ...
+                                     + sum(split16(offset))  # ... fields ...
+                                     + record_type)          # ... on line
+                                 & 0xff)                     # low 8 bits
+                                ^ 0xff)                      # two's ...
+                               + 1)                          # ... complement
+                              & 0xff)                        # low 8 bits
 
 
 def intel_hex(file, bytes_, start_address=0x0):
     """write block of data in Intel hex format"""
+    def write(generator):
+        file.write(''.join(generator))
+
     if len(bytes_) % INTELHEX_BYTES_PER_LINE != 0:
         raise ValueError("Program error: Size of LCD data is not evenly divisible by {}"
                          .format(INTELHEX_BYTES_PER_LINE))
@@ -61,25 +65,21 @@ def intel_hex(file, bytes_, start_address=0x0):
     address_lo =  start_address        & 0xffff
     address_hi = (start_address >> 16) & 0xffff
 
-    intel_hex_line(file,
-                   INTELHEX_EXTENDED_LINEAR_ADDRESS_RECORD,
-                   0,
-                   split16(address_hi))
+    write(intel_hex_line(INTELHEX_EXTENDED_LINEAR_ADDRESS_RECORD, 0,
+                               split16(address_hi)))
 
     size_written = 0
     while size_written < INTELHEX_MINIMUM_SIZE:
         offset = address_lo
         for line_start in range(0, len(bytes_), INTELHEX_BYTES_PER_LINE):
-            intel_hex_line(file,
-                           INTELHEX_DATA_RECORD,
-                           offset,
-                           bytes_[line_start:line_start + INTELHEX_BYTES_PER_LINE])
+            write(intel_hex_line(INTELHEX_DATA_RECORD, offset,
+                                 bytes_[line_start:line_start + INTELHEX_BYTES_PER_LINE]))
             size_written += INTELHEX_BYTES_PER_LINE
             if size_written >= INTELHEX_MINIMUM_SIZE:
                 break
             offset += INTELHEX_BYTES_PER_LINE
 
-    intel_hex_line(file, INTELHEX_END_OF_FILE_RECORD, 0, ())
+    write(intel_hex_line(INTELHEX_END_OF_FILE_RECORD, 0, ()))
 
 
 def img2hex(input_filename,

Development Resources/TS100/TS100.ioc

@@ -11,13 +11,15 @@ ADC1.DiscontinuousConvMode=DISABLE
 ADC1.EnableAnalogWatchDog=false
 ADC1.EnableRegularConversion=ENABLE
 ADC1.ExternalTrigConv=ADC_SOFTWARE_START
-ADC1.ExternalTrigInjecConv=ADC_EXTERNALTRIGINJECCONV_T3_CC4
-ADC1.IPParameters=Rank-0\#ChannelRegularConversion,Channel-0\#ChannelRegularConversion,SamplingTime-0\#ChannelRegularConversion,NbrOfConversionFlag,DataAlign,ScanConvMode,ContinuousConvMode,DiscontinuousConvMode,EnableRegularConversion,NbrOfConversion,ExternalTrigConv,InjNumberOfConversion,EnableAnalogWatchDog,Rank-1\#ChannelRegularConversion,Channel-1\#ChannelRegularConversion,SamplingTime-1\#ChannelRegularConversion,master,Rank-2\#ChannelInjectedConversion,Channel-2\#ChannelInjectedConversion,SamplingTime-2\#ChannelInjectedConversion,InjectedOffset-2\#ChannelInjectedConversion,Rank-3\#ChannelInjectedConversion,Channel-3\#ChannelInjectedConversion,SamplingTime-3\#ChannelInjectedConversion,InjectedOffset-3\#ChannelInjectedConversion,Rank-4\#ChannelInjectedConversion,Channel-4\#ChannelInjectedConversion,SamplingTime-4\#ChannelInjectedConversion,InjectedOffset-4\#ChannelInjectedConversion,Rank-5\#ChannelInjectedConversion,Channel-5\#ChannelInjectedConversion,SamplingTime-5\#ChannelInjectedConversion,InjectedOffset-5\#ChannelInjectedConversion,ExternalTrigInjecConv
+ADC1.ExternalTrigInjecConv=ADC_EXTERNALTRIGINJECCONV_T2_CC1
+ADC1.IPParameters=Rank-0\#ChannelRegularConversion,Channel-0\#ChannelRegularConversion,SamplingTime-0\#ChannelRegularConversion,NbrOfConversionFlag,DataAlign,ScanConvMode,ContinuousConvMode,DiscontinuousConvMode,EnableRegularConversion,NbrOfConversion,ExternalTrigConv,InjNumberOfConversion,EnableAnalogWatchDog,Rank-1\#ChannelRegularConversion,Channel-1\#ChannelRegularConversion,SamplingTime-1\#ChannelRegularConversion,master,Rank-2\#ChannelInjectedConversion,Channel-2\#ChannelInjectedConversion,SamplingTime-2\#ChannelInjectedConversion,InjectedOffset-2\#ChannelInjectedConversion,Rank-3\#ChannelInjectedConversion,Channel-3\#ChannelInjectedConversion,SamplingTime-3\#ChannelInjectedConversion,InjectedOffset-3\#ChannelInjectedConversion,Rank-4\#ChannelInjectedConversion,Channel-4\#ChannelInjectedConversion,SamplingTime-4\#ChannelInjectedConversion,InjectedOffset-4\#ChannelInjectedConversion,Rank-5\#ChannelInjectedConversion,Channel-5\#ChannelInjectedConversion,SamplingTime-5\#ChannelInjectedConversion,InjectedOffset-5\#ChannelInjectedConversion,ExternalTrigInjecConv,InjectedConvMode,Mode
 ADC1.InjNumberOfConversion=4
+ADC1.InjectedConvMode=None
 ADC1.InjectedOffset-2\#ChannelInjectedConversion=0
 ADC1.InjectedOffset-3\#ChannelInjectedConversion=0
 ADC1.InjectedOffset-4\#ChannelInjectedConversion=0
 ADC1.InjectedOffset-5\#ChannelInjectedConversion=0
+ADC1.Mode=ADC_DUALMODE_REGSIMULT_INJECSIMULT
 ADC1.NbrOfConversion=2
 ADC1.NbrOfConversionFlag=1
 ADC1.Rank-0\#ChannelRegularConversion=1
@@ -34,36 +36,67 @@ ADC1.SamplingTime-4\#ChannelInjectedConversion=ADC_SAMPLETIME_239CYCLES_5
 ADC1.SamplingTime-5\#ChannelInjectedConversion=ADC_SAMPLETIME_71CYCLES_5
 ADC1.ScanConvMode=ADC_SCAN_ENABLE
 ADC1.master=1
-Dma.ADC1.0.Direction=DMA_PERIPH_TO_MEMORY
-Dma.ADC1.0.Instance=DMA1_Channel1
-Dma.ADC1.0.MemDataAlignment=DMA_MDATAALIGN_HALFWORD
-Dma.ADC1.0.MemInc=DMA_MINC_ENABLE
-Dma.ADC1.0.Mode=DMA_CIRCULAR
-Dma.ADC1.0.PeriphDataAlignment=DMA_PDATAALIGN_HALFWORD
-Dma.ADC1.0.PeriphInc=DMA_PINC_DISABLE
-Dma.ADC1.0.Priority=DMA_PRIORITY_VERY_HIGH
-Dma.ADC1.0.RequestParameters=Instance,Direction,PeriphInc,MemInc,PeriphDataAlignment,MemDataAlignment,Mode,Priority
-Dma.I2C1_RX.1.Direction=DMA_PERIPH_TO_MEMORY
-Dma.I2C1_RX.1.Instance=DMA1_Channel7
-Dma.I2C1_RX.1.MemDataAlignment=DMA_MDATAALIGN_BYTE
-Dma.I2C1_RX.1.MemInc=DMA_MINC_ENABLE
-Dma.I2C1_RX.1.Mode=DMA_NORMAL
-Dma.I2C1_RX.1.PeriphDataAlignment=DMA_PDATAALIGN_BYTE
-Dma.I2C1_RX.1.PeriphInc=DMA_PINC_DISABLE
-Dma.I2C1_RX.1.Priority=DMA_PRIORITY_MEDIUM
-Dma.I2C1_RX.1.RequestParameters=Instance,Direction,PeriphInc,MemInc,PeriphDataAlignment,MemDataAlignment,Mode,Priority
-Dma.I2C1_TX.2.Direction=DMA_MEMORY_TO_PERIPH
-Dma.I2C1_TX.2.Instance=DMA1_Channel6
-Dma.I2C1_TX.2.MemDataAlignment=DMA_MDATAALIGN_BYTE
-Dma.I2C1_TX.2.MemInc=DMA_MINC_ENABLE
-Dma.I2C1_TX.2.Mode=DMA_NORMAL
-Dma.I2C1_TX.2.PeriphDataAlignment=DMA_PDATAALIGN_BYTE
-Dma.I2C1_TX.2.PeriphInc=DMA_PINC_DISABLE
-Dma.I2C1_TX.2.Priority=DMA_PRIORITY_MEDIUM
-Dma.I2C1_TX.2.RequestParameters=Instance,Direction,PeriphInc,MemInc,PeriphDataAlignment,MemDataAlignment,Mode,Priority
-Dma.Request0=ADC1
-Dma.Request1=I2C1_RX
-Dma.Request2=I2C1_TX
+ADC2.Channel-0\#ChannelRegularConversion=ADC_CHANNEL_8
+ADC2.Channel-1\#ChannelInjectedConversion=ADC_CHANNEL_8
+ADC2.Channel-2\#ChannelInjectedConversion=ADC_CHANNEL_8
+ADC2.Channel-3\#ChannelInjectedConversion=ADC_CHANNEL_8
+ADC2.Channel-4\#ChannelInjectedConversion=ADC_CHANNEL_8
+ADC2.ContinuousConvMode=DISABLE
+ADC2.DataAlign=ADC_DATAALIGN_RIGHT
+ADC2.DiscontinuousConvMode=DISABLE
+ADC2.EnableAnalogWatchDog=false
+ADC2.EnableRegularConversion=ENABLE
+ADC2.IPParameters=Rank-0\#ChannelRegularConversion,Channel-0\#ChannelRegularConversion,SamplingTime-0\#ChannelRegularConversion,NbrOfConversionFlag,Rank-1\#ChannelInjectedConversion,Channel-1\#ChannelInjectedConversion,SamplingTime-1\#ChannelInjectedConversion,InjectedOffset-1\#ChannelInjectedConversion,Rank-2\#ChannelInjectedConversion,Channel-2\#ChannelInjectedConversion,SamplingTime-2\#ChannelInjectedConversion,InjectedOffset-2\#ChannelInjectedConversion,Rank-3\#ChannelInjectedConversion,Channel-3\#ChannelInjectedConversion,SamplingTime-3\#ChannelInjectedConversion,InjectedOffset-3\#ChannelInjectedConversion,Rank-4\#ChannelInjectedConversion,Channel-4\#ChannelInjectedConversion,SamplingTime-4\#ChannelInjectedConversion,InjectedOffset-4\#ChannelInjectedConversion,InjNumberOfConversion,Mode,DataAlign,ScanConvMode,ContinuousConvMode,DiscontinuousConvMode,EnableRegularConversion,NbrOfConversion,InjectedConvMode,EnableAnalogWatchDog
+ADC2.InjNumberOfConversion=4
+ADC2.InjectedConvMode=None
+ADC2.InjectedOffset-1\#ChannelInjectedConversion=0
+ADC2.InjectedOffset-2\#ChannelInjectedConversion=0
+ADC2.InjectedOffset-3\#ChannelInjectedConversion=0
+ADC2.InjectedOffset-4\#ChannelInjectedConversion=0
+ADC2.Mode=ADC_DUALMODE_REGSIMULT_INJECSIMULT
+ADC2.NbrOfConversion=1
+ADC2.NbrOfConversionFlag=1
+ADC2.Rank-0\#ChannelRegularConversion=1
+ADC2.Rank-1\#ChannelInjectedConversion=1
+ADC2.Rank-2\#ChannelInjectedConversion=2
+ADC2.Rank-3\#ChannelInjectedConversion=3
+ADC2.Rank-4\#ChannelInjectedConversion=4
+ADC2.SamplingTime-0\#ChannelRegularConversion=ADC_SAMPLETIME_1CYCLE_5
+ADC2.SamplingTime-1\#ChannelInjectedConversion=ADC_SAMPLETIME_1CYCLE_5
+ADC2.SamplingTime-2\#ChannelInjectedConversion=ADC_SAMPLETIME_1CYCLE_5
+ADC2.SamplingTime-3\#ChannelInjectedConversion=ADC_SAMPLETIME_1CYCLE_5
+ADC2.SamplingTime-4\#ChannelInjectedConversion=ADC_SAMPLETIME_1CYCLE_5
+ADC2.ScanConvMode=ADC_SCAN_ENABLE
+Dma.ADC1.2.Direction=DMA_PERIPH_TO_MEMORY
+Dma.ADC1.2.Instance=DMA1_Channel1
+Dma.ADC1.2.MemDataAlignment=DMA_MDATAALIGN_HALFWORD
+Dma.ADC1.2.MemInc=DMA_MINC_ENABLE
+Dma.ADC1.2.Mode=DMA_CIRCULAR
+Dma.ADC1.2.PeriphDataAlignment=DMA_PDATAALIGN_HALFWORD
+Dma.ADC1.2.PeriphInc=DMA_PINC_DISABLE
+Dma.ADC1.2.Priority=DMA_PRIORITY_VERY_HIGH
+Dma.ADC1.2.RequestParameters=Instance,Direction,PeriphInc,MemInc,PeriphDataAlignment,MemDataAlignment,Mode,Priority
+Dma.I2C1_RX.0.Direction=DMA_PERIPH_TO_MEMORY
+Dma.I2C1_RX.0.Instance=DMA1_Channel7
+Dma.I2C1_RX.0.MemDataAlignment=DMA_MDATAALIGN_BYTE
+Dma.I2C1_RX.0.MemInc=DMA_MINC_ENABLE
+Dma.I2C1_RX.0.Mode=DMA_NORMAL
+Dma.I2C1_RX.0.PeriphDataAlignment=DMA_PDATAALIGN_BYTE
+Dma.I2C1_RX.0.PeriphInc=DMA_PINC_DISABLE
+Dma.I2C1_RX.0.Priority=DMA_PRIORITY_MEDIUM
+Dma.I2C1_RX.0.RequestParameters=Instance,Direction,PeriphInc,MemInc,PeriphDataAlignment,MemDataAlignment,Mode,Priority
+Dma.I2C1_TX.1.Direction=DMA_MEMORY_TO_PERIPH
+Dma.I2C1_TX.1.Instance=DMA1_Channel6
+Dma.I2C1_TX.1.MemDataAlignment=DMA_MDATAALIGN_BYTE
+Dma.I2C1_TX.1.MemInc=DMA_MINC_ENABLE
+Dma.I2C1_TX.1.Mode=DMA_NORMAL
+Dma.I2C1_TX.1.PeriphDataAlignment=DMA_PDATAALIGN_BYTE
+Dma.I2C1_TX.1.PeriphInc=DMA_PINC_DISABLE
+Dma.I2C1_TX.1.Priority=DMA_PRIORITY_MEDIUM
+Dma.I2C1_TX.1.RequestParameters=Instance,Direction,PeriphInc,MemInc,PeriphDataAlignment,MemDataAlignment,Mode,Priority
+Dma.Request0=I2C1_RX
+Dma.Request1=I2C1_TX
+Dma.Request2=ADC1
 Dma.RequestsNb=3
 FREERTOS.FootprintOK=true
 FREERTOS.INCLUDE_vTaskDelete=0
@@ -82,16 +115,17 @@ IWDG.Prescaler=IWDG_PRESCALER_256
 KeepUserPlacement=false
 Mcu.Family=STM32F1
 Mcu.IP0=ADC1
-Mcu.IP1=DMA
-Mcu.IP2=FREERTOS
-Mcu.IP3=I2C1
-Mcu.IP4=IWDG
-Mcu.IP5=NVIC
-Mcu.IP6=RCC
-Mcu.IP7=SYS
-Mcu.IP8=TIM2
-Mcu.IP9=TIM3
-Mcu.IPNb=10
+Mcu.IP1=ADC2
+Mcu.IP10=TIM3
+Mcu.IP2=DMA
+Mcu.IP3=FREERTOS
+Mcu.IP4=I2C1
+Mcu.IP5=IWDG
+Mcu.IP6=NVIC
+Mcu.IP7=RCC
+Mcu.IP8=SYS
+Mcu.IP9=TIM2
+Mcu.IPNb=11
 Mcu.Name=STM32F103T(8-B)Ux
 Mcu.Package=VFQFPN36
 Mcu.Pin0=PA6
@@ -119,8 +153,8 @@ Mcu.PinsNb=21
 Mcu.ThirdPartyNb=0
 Mcu.UserConstants=
 Mcu.UserName=STM32F103T8Ux
-MxCube.Version=4.25.0
-MxDb.Version=DB.4.0.250
+MxCube.Version=4.26.0
+MxDb.Version=DB.4.0.260
 NVIC.ADC1_2_IRQn=true\:5\:0\:false\:false\:true\:true\:true
 NVIC.BusFault_IRQn=true\:0\:0\:false\:false\:true\:false\:true
 NVIC.DMA1_Channel1_IRQn=true\:5\:0\:false\:false\:true\:true\:true
@@ -204,7 +238,7 @@ ProjectManager.BackupPrevious=false
 ProjectManager.CompilerOptimize=3
 ProjectManager.ComputerToolchain=false
 ProjectManager.CoupleFile=false
-ProjectManager.CustomerFirmwarePackage=C\:/Users/Ralim/STM32Cube/Repository/STM32Cube_FW_F1_V1.6.1
+ProjectManager.CustomerFirmwarePackage=
 ProjectManager.DefaultFWLocation=true
 ProjectManager.DeletePrevious=true
 ProjectManager.DeviceId=STM32F103T8Ux
@@ -216,15 +250,15 @@ ProjectManager.KeepUserCode=true
 ProjectManager.LastFirmware=true
 ProjectManager.LibraryCopy=1
 ProjectManager.MainLocation=Src
-ProjectManager.PreviousToolchain=SW4STM32
+ProjectManager.PreviousToolchain=TrueSTUDIO
 ProjectManager.ProjectBuild=false
 ProjectManager.ProjectFileName=TS100.ioc
 ProjectManager.ProjectName=TS100
 ProjectManager.StackSize=0x400
-ProjectManager.TargetToolchain=SW4STM32
+ProjectManager.TargetToolchain=TrueSTUDIO
 ProjectManager.ToolChainLocation=
-ProjectManager.UnderRoot=false
-ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-HAL-true,2-MX_DMA_Init-DMA-false-HAL-true,3-MX_I2C1_Init-I2C1-false-HAL-true,4-MX_ADC1_Init-ADC1-false-HAL-true,5-SystemClock_Config-RCC-false-HAL-true,6-MX_TIM3_Init-TIM3-false-HAL-true,7-MX_IWDG_Init-IWDG-false-HAL-true,8-MX_TIM2_Init-TIM2-false-HAL-true
+ProjectManager.UnderRoot=true
+ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-HAL-true,2-MX_DMA_Init-DMA-false-HAL-true,3-MX_I2C1_Init-I2C1-false-HAL-true,4-MX_ADC1_Init-ADC1-false-HAL-true,5-SystemClock_Config-RCC-false-HAL-true,6-MX_TIM3_Init-TIM3-false-HAL-true,7-MX_IWDG_Init-IWDG-false-HAL-true,8-MX_TIM2_Init-TIM2-false-HAL-true,9-MX_ADC2_Init-ADC2-false-HAL-true
 RCC.ADCFreqValue=8000000
 RCC.ADCPresc=RCC_ADCPCLK2_DIV8
 RCC.AHBFreq_Value=64000000
@@ -249,8 +283,8 @@ RCC.USBFreq_Value=42666666.666666664
 RCC.USBPrescaler=RCC_USBCLKSOURCE_PLL_DIV1_5
 SH.ADCx_IN7.0=ADC1_IN7,IN7
 SH.ADCx_IN7.ConfNb=1
-SH.ADCx_IN8.0=ADC2_IN8
-SH.ADCx_IN8.1=ADC1_IN8,IN8
+SH.ADCx_IN8.0=ADC1_IN8,IN8
+SH.ADCx_IN8.1=ADC2_IN8,IN8
 SH.ADCx_IN8.ConfNb=2
 SH.ADCx_IN9.0=ADC2_IN9
 SH.ADCx_IN9.1=ADC1_IN9,IN9

Development Resources/TS80-Bootloader.hex

@@ -0,0 +1,515 @@
+:020000040800F2
+:2000000020310020E52E00088D2E00088F2E0008912E0008932E0008952E00080000000071
+:20002000000000000000000000000000972E0008992E0008000000009B2E00089D2E000880
+:20004000252F0008292F00082D2F0008312F0008352F0008392F00083D2F0008412F000850
+:20006000452F0008492F00084D2F0008512F0008552F0008592F00085D2F0008612F000830
+:20008000652F0008692F00086D2F0008712F00089F2E0008792F00087D2F0008812F0008E7
+:2000A000852F0008892F00088D2F0008912F0008952F0008992F00089D2F0008A12F0008F0
+:2000C000A52F0008A92F0008AD2F0008B12F0008B52F0008B92F0008BD2F0008C12F0008D0
+:2000E000C52F0008C92F0008CD2F0008D12F0008D52F0008D92F0008DD2F0008E12F0008B0
+:20010000E52F0008E92F0008ED2F0008F12F0008F52F0008F92F0008FD2F0008013000088E
+:2001200005300008093000080D3000081130000870B500F08FFEDFF8144804F510553C350F
+:200140000146284600F016FC4FF40051204600F0D1FE04F200464FF4B0720FF650213046A2
+:2001600000F0F2FE0B222946304600F0EDFE0FF6CC4518222946204600F0E6FE1822294610
+:2001800004F5007000F0E0FEDFF8C407C4F81604A0220FF6783104F5C06000F0D5FE5022F2
+:2001A0000FF6084104F5006000F0CEFE40220FF64C4104F5206000F0C7FE42F20C20011940
+:2001C0000022CA760A774A7602518A600A61CA6070BD70B50C46DFF87467B4F5805F03D1F8
+:2001E00000F044F830460EE0B4F5205F04D100F03DF806F5007006E0B4F5804F07D100F0BC
+:2002000035F806F58060BDE8704000F08DBEB4F51A4F2AD300F02AF806F5C06000F084FE98
+:200220004FF40072314606F508503C3000F08CFE42F2272085196978B9B9DFF81817098856
+:20024000825D32B9B4F52A4F00D271B100F0A2F90AE0012A09D111B1B4F51C4F02D2B4F5F1
+:200260002C4F02D300F08BFA687070BD4FF400720146704710B50446080004D14FF4007260
+:200280000FF228713DE0DFF8C416B0F5805F08BF4FF4007235D0B0F5205F04D14FF4007243
+:2002A00001F500712DE0B0F5804F04D14FF4007201F5806125E0B0F5004F05D100F02DF811
+:2002C000A0220FF648211CE0B0F5024F05D100F024F850220FF6D42113E06FF402421218EA
+:2002E00041F2FF739A4205D200F017F840220FF60C3106E0B0F51A4F08D34FF4007201F589
+:20030000C0612046BDE8104000F00EBE4FF400712046BDE8104000F053BE4FF4007120467B
+:2003200000F04EBE2DE9F84F4FF02008DFF81C5642F227277C194FF4085908EB050000F20F
+:200340000046002030733078E52818BF002800F0E580F07A202840F0E180307A482826D137
+:20036000707A452804BFB07A582840F0D08000F0DDF800207855607820B102280DD00428AB
+:2003800006D010E05220307244207072592009E0452030725220707204E04E2030724F201D
+:2003A00070725420B072F07D401CF075B4E041285AD1707A442804BFB07A52285BD100F096
+:2003C000B5F800207855607049F805004FF0020A95F80006302804BF95F8010678281ED151
+:2003E0000AEB050090F80006A0F13001C9B20A2922BFA0F14101C9B2062922BFA0F16101D3
+:20040000C9B206290BD259F805104FEA011B49F805B000F0DAF9584449F8050003E0607844
+:2004200040F0040060700AF1010ABAF10A0FCFDB6078A0B959F80500DFF81C15884202D316
+:2004400000F00FFD18B94E2030724F2004E001207855532030724520707254205BE045200E
+:2004600030725220707256E0422820D1707A492804BFB07A4E284AD100F058F8785D28B926
+:200480004E2030724F207072542004E052203072442070725920B072785D022804BF0020CC
+:2004A0007855785D012837D10220785534E053280DD1707A452804BFB07A542827D1785D80
+:2004C00060BB5520307253207072452023E0522805D1707A44281AD1B07A59280EE0552886
+:2004E00005D1707A532812D1B07A452806E0452806D1707A52280AD1B07A522807D10DE075
+:200500004E2801BF707A4F28B07A542806D04520307252207072B0720320607008F1200837
+:20052000B8F5007FFFF609AFBDE8F18FB07EF17E00EB01200005000DDFF8181408804FF434
+:200540007A7000F041BD70B542F20C25DFF8FC63AC19207F03281BD100F0F5FD0028FBD1B2
+:2005600000F03FFD4FF4C87000F02EFD012000F038FD00F0F5FD002020776076A060A8510B
+:20058000DFF8D00300210180E07E022808BFE17670BD00002DE9F04742F20424DFF8AC53BD
+:2005A00066190020F060306900EB0509F068401942F2242A0AEB050742F2292879780E29D9
+:2005C00056D8DFE801F0080C131B1F2C324146595F757B838A0090F800063A2874E000F006
+:2005E000CBF80001B0770020306173E096F81E8000F0C2F84044B077B07F5DE000F0BCF87B
+:2006000000010AE054F8058000F0B6F8404460516059F17F4118F177000260515AE000F084
+:20062000ABF800010AF8050054E01AF8058000F0A3F840440AF8050060591AF8051008182E
+:200640006051F07F081837E000F096F80001707740E096F81D8000F08FF840447077F07F41
+:20066000717F0818F0777878401C7870B07F002876D17878801C72E000F07EF8000108F8EC
+:20068000090027E018F809A000F076F8504408F809003069F17F421918F802205118F1772F
+:2006A000401C3061B17F884214D27878401E56E000F060F808EB0010F0770BE000F05AF80A
+:2006C0004044F077F07F002846D103E090F800060D2841D17878401C41E090F800060A289C
+:2006E0003AD10020F870707F042805D17879B979090401EB00607060707F012837D068BBE8
+:2007000060597168081860519349884201D202202EE0002001E03069801C30613069B17F3D
+:2007200088421BD26159401800F03BFD31694A1960590818491CB37F994218F8021008BF97
+:2007400041F47F4104D04244527801EB022189B200F016FD0428DED0042009E00020787044
+:20076000F068401CF060B0F5007FFFF41CAF0020BDE8F08796F81F8090F8000625E0F8B5EA
+:200780000024724D05F508564FF408577859F168081800F006FD601990F8001690F8010699
+:2007A00001EB002189B27859F268101800F0E8FCF168891CF160042801D00420F2BDA41CEB
+:2007C000B4F5007FE2D30020F2BD10B585B0044600A80FF2C411112200F0B6FBA4F16100E1
+:2007E000C0B21A2838BF203C002000A9415CE4B2A14204D0401CC0B21028F6D3002005B09B
+:2008000010BD2DE9F04142F21824504D6619534F327A2AB940023860480278600120307248
+:20082000307A012831D1605978B905F5005839684046FFF71FFD40229821404600F0C6FC1B
+:200840004FF4E070605140200CE040229821B868401900F5005000F0B9FC605940386051A8
+:20086000B8684030B8604021012000F05AFD3021012000F0E0FC38684030386078684038C9
+:2008800078603748816840398160786838B96051B860386033480321017000203072BDE815
+:2008A000F0812DE9F04142F21C24284D6259403266192D4F33792BB94002386048027860E3
+:2008C00001203071307901282FD1002027490AE05B1903F5005310F801C083F800C0401CEB
+:2008E00063595B1C635163599342F1D3DFF88080B8F800003968411839607A68101A7860BE
+:20090000C00507D100206051A1F5007105F50050FFF75FFC12488168B8F80020891A816030
+:200920004FF44051022000F097FC786800281EBF0C480078042806D100206051012100F0A7
+:2009400057FE00203071BDE8F0810000EC010020188DDD40102D002000400008D82C0020D3
+:20096000C82C0020942C0020E42C0020342C0020962C00201C2221FA02F303F00F030A2B69
+:20098000ACBF3733303300F8013B121F53B2002BF1D50021017070473031323334353637DF
+:2009A000383941424344454600000000EB3C904D53444F53352E3000020108000200020052
+:2009C00010F80C00010001000000000000000000000029A298E46C4E4F204E414D45202030
+:2009E0002020464154313220202033C98ED1BCF07B8ED9B800208EC0FCBD007C384E247DAE
+:200A0000248BC199E83C01721C83EB3A66A11C7C26663B07268A57FC750680CA028856025B
+:200A200080C31073EB33C98A461098F7661603461C13561E03460E13D18B7611608946FCBA
+:200A40008956FEB82000F7E68B5E0B03C348F7F30146FC114EFE61BF0000E8E600723926B9
+:200A6000382D741760B10BBEA17DF3A66174324E740983C7203BFB72E6EBDCA0FB7DB47D1B
+:200A80008BF0AC9840740C487413B40EBB0700CD10EBEFA0FD7DEBE6A0FC7DEBE1CD16CD4D
+:200AA00019268B551A52B001BB0000E83B0072E85B8A5624BE0B7C8BFCC746F03D7DC746D3
+:200AC000F4297D8CD9894EF2894EF6C606967DCBEA030000200FB6C8668B46F86603461C43
+:200AE000668BD066C1EA10EB5E0FB6C84A4A8A460D32E4F7E20346FC1356FEEB4A52500655
+:200B0000536A016A10918B4618969233D2F7F691F7F64287CAF7761A8AF28AE8C0CC020AEB
+:200B2000CCB80102807E020E7504B4428BF48A5624CD136161720B40750142035E0B4975ED
+:200B400006F8C341BB000060666A00EBB04E544C44522020202020200D0A52656D6F766544
+:200B6000206469736B73206F72206F74686572206D656469612EFF0D0A4469736B2065720E
+:200B8000726F72FF0D0A507265737320616E79206B657920746F20726573746172740D0ACF
+:200BA00000000000000000ACCBD855AA4446552056335F34325F44080000000000000000EF
+:200BC00000008A5A794500000000000042200049006E0066006F000F007272006D006100C4
+:200BE000740069006F0000006E00000001530079007300740065000F00726D0020005600BE
+:200C00006F006C00750000006D00650053595354454D7E3120202016005E63705D455D4533
+:200C2000000064705D45020000000000412E005F002E00540072000F007F610073006800B0
+:200C40006500730000000000FFFFFFFF7E3120202020202054524122004A8A5A794579459E
+:200C600000008A5A7945050000100000E552415348457E3145464D1200478A5A7945794525
+:200C800000008A5A7945040000000000412E0054007200610073000F002568006500730031
+:200CA0000000FFFFFFFF0000FFFFFFFF5452415348457E312020201200478A5A79457945AD
+:200CC00000008A5A7945040000000000412E0066007300650076000F00DA65006E0074001B
+:200CE0007300640000000000FFFFFFFF46534556454E7E3120202012004D8A5A794579458C
+:200D000000008A5A79450D00000000002E2020202020202020202010005E63705D455D4531
+:200D2000000064705D450200000000002E2E20202020202020202010005E63705D455D453A
+:200D4000000064705D4500000000000042470075006900640000000F00FFFFFFFFFFFFFF4A
+:200D6000FFFFFFFFFFFF0000FFFFFFFF0149006E006400650078000F00FF65007200560049
+:200D80006F006C00750000006D006500494E444558457E3120202020007263705D455D45BC
+:200DA000000064705D4503004C0000007B00380031004200320031003700330033002D001B
+:200DC00036003800440039002D0034003000350039002D0041003500370033002D004500AA
+:200DE000410030004400320033003200450039003300320031007D00000000002E20202088
+:200E0000202020202020203200478A5A7945794500008A5A79450400000000002E2E2020D7
+:200E2000202020202020201000478A5A7945794500008A5A7945000000000000F8FFFFFF84
+:200E4000FFFFFF6F0007800009A0000BC000FFFFFFFF0F00234801684268511880684018F9
+:200E6000704710B5FFF7F6FF1F490C6800F006F8844201D1012010BD002010BD0A231B4A3C
+:200E800001461B48FFE7F0B503F11506C3F14304C3F151050A330EE0C0EB40105F1003EB86
+:200EA00097774FEAA70CA3EB8C07FF0021FA07F7FFB238185B1C1BB2B342EDDB0DE0C0EB65
+:200EC0004010631004EB93739B10A4EB8301C90022FA01F1C9B20818641C24B2AC42EEDB1D
+:200EE000F0BD0000E8F7FF1FFC3F0008011020D502DEC0DE002200F0BDBB10B450F8041BCC
+:200F000081B102681218001D50F8043BDC0744BFA9F10104E31852F8044B43F8044B091F9C
+:200F2000F9D1EBE710BC704762B38B0708D0521E11F8013B00F8013B00F024808B07F6D13D
+:200F4000830740F0208000BF103A07D330B4B1E83810103AA0E83810F9D230BC530724BF81
+:200F6000B1E80810A0E8081044BF51F8043B40F8043BD20724BF31F8022B20F8022B44BFC4
+:200F80000B7803707047083A07D3B1E80810083A40F8043B40F804CBF7D25307E4E750F8E1
+:200FA000041B61B150F8042BD30744BFA9F101039A18002342F8043B091FFAD1EFE7704740
+:200FC000002200F071BB000000214FF6FF7302E04D4A1360491C40F2DC5242439142F7D328
+:200FE00070474A494FF400620A614FF480520A61002808680AD120F4404040F440500860E4
+:20100000086820F4402040F4403009E020F4804040F430400860086820F4802040F43020D7
+:201020000860704780F308887047704738B500F06BFB102000F0E0FB354C207820B10220D6
+:2010400000F0D4FB082502E000F0D0FB002531484168314A11434160016841F08071016064
+:20106000012000F06AFB012000F06AFB392000F094FB0028FAD0207800B1022000F063FB01
+:2010800000F068FBA842FBD10121142000F06AFB012140F20C6000F06EFB01214FF400001E
+:2010A00000F072FB207820B10120BDE8324000F056BB31BD80B501464FF0006000F047FCF5
+:2010C0004FF4A06000F012FC14208DF8000002208DF8010000208DF8020001208DF803001E
+:2010E00000A800F008FC01BD0C484FF6FF71C1600B4A02600B4A42600B48C1600B49016095
+:201100004FF08831416070470C10014004080140E8010020001002400A846800000801403B
+:201120008888880884B4BB8B000C0140884883440948012101600021016041604FF4E05142
+:20114000064A118005E0044801210160002141600321016000207047405C0040142D00209F
+:201160000448C0610221017203490162034A426208680047A02C0020D800002030010020E0
+:2011800038B504460D46104800F0A0FB05281CBF342000F07AFB29462046BDE8344000F043
+:2011A0005BBB10B50446A0050CD1074800F08EFB05281CBF342000F068FB2046BDE81040B6
+:2011C00000F02EBB10BD0000A086010010B5490001F1804101F5C041521C521009E010F8C9
+:2011E000013B10F8014B43EA042321F8023B891C521EF4D110BD490001F1804101F5C0411B
+:20120000521C521004E051F8043B20F8023B521EF9D170474FF6F8710840DFF89011086076
+:20122000704710B5DFF8882152F8203048F68F142340194324E010B5DFF8742152F82030A9
+:2012400048F6BF742340CC0648BF83F01003890648BF83F020030FE010B5DFF8542152F8E5
+:2012600020304BF68F742340CC0448BF83F48053890448BF83F4005343F4004141F08001CE
+:2012800042F8201010BDDFF8281151F820204BF68F731A4082F4405242F4004209E0DFF8A1
+:2012A000101151F8202048F68F631A4042F40042FFE742F0800241F820207047DFF8F010E1
+:2012C00051F8202052040AD551F8202048F68F731A4042F4404242F0800241F82020704791
+:2012E000334951F8202052060AD551F8202048F68F731A4042F4004242F0C00241F82020AA
+:20130000704738E0294A126892B202EBC000294A37E03BE02549096889B201EBC000254947
+:201320003AE0224A126892B202EBC000224A2AE01E4A126892B202EBC000204A02EB4000DC
+:201340003F2909D34A091F23194208BF521E1204910941F4004105E04A08C90748BF521C80
+:2013600012049109016070471049096889B201EBC000124914E00D4A126892B202EBC000E3
+:201380000F4A4908490042F8101070470749096889B201EBC0000A4951F8100080B270470C
+:2013A00051F810008005800D70470000505C0040005C004008600040046000400C6000408B
+:2013C000006000400106090C41EA10207047000080B5964890F82010022909D018D3042958
+:2013E00002D00ED3052913D1002180F820100CE0C17B28290CD1816A406ABDE8044000F09B
+:20140000FEBA0121002000F0F3F84FF440512BE101BD38B5854CE57B0220FFF7A5FF60849B
+:201420000246D8218248FFF7E6FE94F8200010B1012803D00AE0BDE8314013E02A2D06D13D
+:20144000A16A606ABDE8344000F003BB022000F0F9F82421052000F0CDFA00210220BDE8E4
+:201460003440C5E010B5714C628C1AB170492046FFF76AFD6F4861684160A1688160608CA5
+:201480001F2806D0022000F0DDF8002020601A218DE0E27B282A18BF2A2A0FD1607CA17C4D
+:2014A000090441EA0060E17C40EA0120217D08436062A07DE17D41EA0020A06220685E494A
+:2014C000884270D15D480068617B884204D3A07B401EC0B2102804D3022000F0B3F824217B
+:2014E00065E0606AA16A002A49D0032A2BD0082A18BF0A2A53D0122A29D0152A4FD01A2A30
+:201500002DD01B2A27D01D2A49D01E2A23D0232A2DD0252A2FD0282A35D02A2A37D02F2A54
+:2015200039D0552A3BD05A2A1DD0882A18BF8A2A35D08F2A18BF9E2A31D0A82A1CBFAA2A8B
+:20154000AF2A2CD02FE0BDE8104000F04BBABDE8104000F011BABDE8104000F04FBABDE87A
+:20156000104000F037BABDE8104000F037BABDE8104000F010BABDE8104000F01BBABDE856
+:20158000104000F0A5BABDE8104000F038BABDE8104000F05EBABDE8104000F083BABDE811
+:2015A000104000F09ABA022000F04CF82021052000F020FA00210120BDE8104018E010B5DD
+:2015C0000C4622469821FFF701FE21460120FFF7A8FE30210120FFF72EFE1448032180F8F3
+:2015E000201014488168091B81600021017310BD10B50C460F4B1249196018730D22982157
+:201600001846FFF7E3FD0D210120FFF78AFE0748052180F8201044B1042180F82010302199
+:201620000120BDE81040FFF706BE10BD742C0020342C0020C82C002055534243002D00203F
+:201640005553425380B518B1022807D00AD301BD10210120BDE80440FFF7EDBD1021012086
+:20166000FFF7E9FD4FF480510220BDE80440FFF7F3BD000000B500BF130096469446103943
+:2016800028BFA0E80C50FAD85FEA417C28BF0CC048BF40F8042BC90728BF20F8022B48BF83
+:2016A00000F8012B00BD0000401810F0030308D0C91A1FD3DB0748BF00F8012D28BF20F830
+:2016C000022D130030B414461546103928BF20E93C00FAD8490728BF20E90C0048BF40F85D
+:2016E000042D890028BF20F8022D48BF00F8012D30BC7047C91818BF00F8012DCB0728BF9B
+:2017000000F8012D704700002E48016841F00101016041682C4A1140416001682B4A114039
+:201720000160016821F480210160416821F4FE0141604FF41F0181607047254908607047E2
+:2017400025490860704723490A68920850EA8200086070471F48006800F00C0070471F49BF
+:20176000086070471E4A0029116814BF084321EA0000106070471B4A0029116814BF0843CB
+:2017800021EA000010607047174A0029116814BF084321EA00001060704700214209094B04
+:2017A000012A08BF1A6803D0022A0CBF1A6A5A6A012300F01F0003FA00F0024218BF012146
+:2017C00008467047001002400000FFF8FFFFF6FE000042420410024060004242D8004242AF
+:2017E00014100240181002401C100240DFF8C4100A6802F0380206E0DFF8B8100A6822F059
+:2018000010020A600A68104308607047FFE7DFF8A800DFF8A8100160DFF8A4100160704770
+:2018200038B5054600F015F804280DD1DFF89440206840F002002060656000F006F8216848
+:2018400041F6FD721140216032BD206840F0400020604FF4302039E070B504460D4600F04B
+:2018600011F804280CD1174E306840F001003060258000F007F8316841F6FE7211403160E2
+:2018800070BD08804FF4005020E00F490860704704200D490A68D20701D5012070470A68A4
+:2018A000520701D5022070470968C90648BF03207047000000200240042002402301674567
+:2018C000AB89EFCD102002400C20024010B5FFE70446FFF7DDFF03E02CB1FFF7D9FF641E61
+:2018E0000128F9D004B9052010BD00001B4908431B490860704770B503781A460121C478B7
+:20190000ECB1174B1B6803F4E063C3F5E0631B0A4478C3F10405AC4085780F2626FA03F33E
+:201920002B4023431B010F4C1355007842110E4B00F01F0001FA00F043F8220070BD5011EE
+:201940000A4A03F01F03994042F8201070BD084A1140084307490860704700000000FA0552
+:201960000CED00E000E400E000E100E080E100E080FFFF1F08ED00E07449087CC00702D577
+:201980007348052105E00FF2E410C97C252928BF2421FFF714BE6F48002181800221817117
+:2019A0000021C1714172022181720021C1720C21FFF705BE6848002101800F218170FF213E
+:2019C000C17000218180022181710021C1710821FFF7F5BD04216148FFF7F1BD0821604838
+:2019E000FFF7EDBD5948C17C132928BF12215D48FFF7E5BD5B4A90701173704769E070B588
+:201A000004460D46584E3078C0B92A462146282000F076F8C8B14D48007B000603D502205C
+:201A2000307029460CE00220FFF70CFE00F00EF801210120BDE87040FFF7DABD022804D16F
+:201A40002046BDE87040FEF7DCBE70BD24210520D0E710B5444C2278EAB90A4601462A207B
+:201A600000F04EF8E8B13948007B000608D4012020704FF440510220BDE81040FFF7ECBB80
+:201A80000020FFF7DFFDFFF7E1FF00210120BDE81040FFF7ADBD012A04BFBDE81040FEF70F
+:201AA00000BF10BD80B52948816829B9007C400702D40121002006E00220FFF7C3FDFFF79A
+:201AC000C5FF00210120FFE7BDE80440FFF790BD00BF01210020FFF78BBD80B51B4881682E
+:201AE00009B9002004E0007B00064CBF00200220FFF7A8FD2021FFF7AAFF00210120E3E7CB
+:201B000080B55118B1F5805F09D92A2804BF0220FFF798FD0020FFF795FD21210BE00B49D5
+:201B20008968B1EB422F0ED02A280CBF02200020FFF788FD2421FFF78AFF00210120FFF7F3
+:201B400057FD002002BD012002BD0000742C0020EC2C0020BC010020F42C0020E401002058
+:201B6000D8010020A8010020942C002000800202200000005669727475616C204446552019
+:201B80004469736B20202020202020202020202010B5DFF8884700B92BE000F096F8006825
+:201BA000804720680A3010BD80B5DFF870070068C178DFF86C2752788A420CD38278002AA8
+:201BC00004BF8288002A06D1817200F07EF840688047002002BD022002BD10B5DFF83C4790
+:201BE00000B906E000F071F88068804720680C3010BD206801210182002010BD10B5DFF8F7
+:201C00001C472068C1784079DFF8182712689269904721688A7A92B1002804BF0879002821
+:201C20000DD1887858B900F050F8C068804720684179C1722068C1780173002010BD0220D5
+:201C400010BD1CB5DFF8D416096810B90220088239E0DFF8D44600202080087800227F2331
+:201C6000184215D1487A81064CBF42F0020102F0FD0121702178400654BF01F0FE0041F008
+:201C80000100207000F021F800698047204616BD00F07F03012BF9D000F07F00022812D15E
+:201CA000487900F00F0142F0010200F088FA05D500F030001028E5D12270E3E700F44050F4
+:201CC000B0F5805FF7E7002016BDDFF8600600687047F8B5DFF844060068017811F07F0123
+:201CE00004D1417A01F0DF0141724FE0022901BF41880029017900294AD1417921F08005B6
+:201D0000DFF82C460A0654F825204CBF02F0300202F44052DFF808361B789D4238D2002A67
+:201D20001CBF807A002833D0080654F825000BD500F03000102825D12846FFF7D1FA302176
+:201D40002846FFF778FA1DE000F44050B0F5805F18D148F280064BF68F7745B900F0BDFA13
+:201D60002068384080F44050304320600AE02846FFF7A4FA54F82500384080F44050304320
+:201D800044F82500FFF7A1FF406980470020F2BD0220F2BD38B5DFF884050268537923F0A6
+:201DA0008000DFF88C151C0651F820404CBF04F0300404F44054DFF868552D78A84206D2A6
+:201DC000558825B9002C1CBF927A002A01D1022032BD48F280021B0651F8203005D548F69A
+:201DE000BF74234083F0100304E04BF68F74234083F480531A4341F82020FFF766FF8069D8
+:201E00008047002032BD80B5DFF810050068417A41F020014172FFF758FFC0698047002046
+:201E200002BDDFF8F8241268538A20B98888C01A108200207047086818187047F8B5DFF892
+:201E4000DC54286800F110042688A168080018BF002E14D0A088864288BF0646304688474D
+:201E600007462088801B20806088301860800020FFF750FA324601463846FFF7BCF9DFF803
+:201E8000B464208850B1DFF8B0044FF44051018000210020FFF745FA3020308028682188F2
+:201EA000A288914228BF032101D211B105210172F1BD06210172DFF88404006880B2DFF8D4
+:201EC0008014002241F8102030203080F1BD2DE9F843DFF84844206800F110063188DFF862
+:201EE0005454002904BF007A042816D1DFF85404017801290DD1DFF84414096889B2DFF85F
+:201F00004024002342F8113030212980042703702CE007271020288028E0B6F8048088450E
+:201F200005D30427414588BF4146884600E002274046B168884781460020FFF7EAF94246BD
+:201F400001464846FFF742F941460020FFF7E9F93088A0EB08003080708840447080302045
+:201F60002880DFF8D4034FF44051018020680772BDE8F18338B5DFF8A44320684578017833
+:201F80007F22114238D1092D02D1FFF70DFE47E0052D1BD1C17880294FD28178002901BF10
+:201FA00081880029807A002847D10620DFF88C13096889B2DFF88823002342F81130DFF876
+:201FC000741330220A802168087231BD032D08D1C178012904BF8088002823D1FFF713FF52
+:201FE0001EE0012D04BFC17801291BD18188C9B9407A80060DD415E001F07F00012804D194
+:020000040800F2
+:202000000B2D0FD1FFF7FAFD0AE002280AD1012D02D1FFF75EFE03E0032D03D1FFF7BAFEE4
+:202020000028C2D02846BF49096849698847032808BF0920C7D00028B7D00820C3E738B55E
+:20204000B64D28684178B74C062913D101787F2211422AD18078012802D12068C16968E0C8
+:20206000022802D12068016A63E003281DD12068416A5EE000293DD14188002904BFC1886E
+:20208000022912D1017981B901787F22114204BF8288002A2CD001F07F02012A10D100F0B0
+:2020A00089F810B92868807A10BB28684078216809698847032845D128680921017231BD13
+:2020C00001F07F010229F0D1407900F00F0100F0700200F074F84CBF00F0300000F440507D
+:2020E0008F4B1B789942E0D2002ADED10028DCD095491EE0082905D100787F210842D4D14F
+:20210000924916E00A2902BF017801F07F010129CBD1817A0029C8D04188002901BF017962
+:202120000029C1880129C0D100F044F80028BCD187490800B9D028680022428281610020B8
+:202140008847002029680A8A4FF6FF739A4208BF092004D0022818BF002A02D10820087274
+:2021600031BD087800061ED5C88800902368009C944202D2009808820FE082420DD293F808
+:202180002C00704C824238BF002005D392FBF0F500FB152008B90120207093F82C008882CF
+:2021A000BDE8314093E60320087263484FF44051018031BD002140792268926910475C4BA8
+:2021C000000653F82100704738B55C48006880B2604931F81000400000F1804000F5C040E3
+:2021E0004E4C21680A7A092A14D010F8012B0A70216810F8012B4A70851C35F8040BFFF729
+:20220000E1F8216848802888FFF7DCF821688880A888C8802068012101722068C08810B95B
+:20222000FFF7A8FE01E0FFF70AFFBDE831403EE010B53A4C2068017A022918BF042904D19C
+:20224000FFF745FE2068007A14E0062911D14178052902BF01787F22114206D1C07800F02A
+:2022600042F8FFF732FD006A80472E48006880688047082017E010B5284C2068007A0228BD
+:2022800018BF04280ED0032818BF052804D1FFF7D5FD2068007A06E0072803D121480068D5
+:2022A000C0688047082021680872BDE8104080B500F013F819480068017A082906D11E492C
+:2022C0004FF480520A801B4910220A80007A092801D1012002BD002002BD1F4890F82C10D8
+:2022E0000020FFF725B870B50D4909780022104B48F68F760BE0D4B253F824503540254322
+:2023000045F4004545F0800543F82450521C8A42F1D340F080001149086070BDBC2C002031
+:20232000E0010020C02C0020082D0020C42C0020005C00400E2D00200C2D0020505C0040EF
+:2023400004600040172D0020431C0008911B0008DB1B000808600040D80000204C5C0040D4
+:2023600070470000F8B58478303CE4B20A2C38BF2246C478303CE4B20A2C38BF234600781A
+:202380003038C0B20A2838BF01460024534818250FF2A016271805FB014C1CF806C087F85B
+:2023A00060C005FB024C1CF806C087F890C005FB034C1CF806C087F8A8C0641C182CE9DB6E
+:2023C00000240C2201460C206043C0B200F004F8641C082CF5DBF1BD70B504460D461646E7
+:2023E000002100F04BF8761C2946F0B200F035F805460121204600F041F82946F0B2BDE817
+:2024000070402AE03749086037483C2202700968C9B2334800F09AB910B58CB000A80FF277
+:20242000DC013022FEF790FD2E2200F03CF82F4C4FF48071204600F006FA0220FEF7C4FD9A
+:202440004FF48071204600F0FCF90220FEF7BCFD2E20FFF7D7FF0CB010BD10B50C4620490A
+:2024600040220A70012203E014F8013B5354521C8242F9DBFFF7C6FF204610BD30B583B07F
+:2024800000AA0FF2A80330CB30C28DF80500012904BFB1208DF80100082200F004F80820ED
+:2024A000FFF7B0FF37BD00A90D48FEF73DBD10B500212020FFF7E2FF094C00F019F88020A3
+:2024C000FFF7A0FF01212020FFF7D8FF00F010F88020BDE8104095E700000000000000200F
+:2024E00034260020FC2C0020162D002000080140402020707F21601CFEF762BD80AE80D5CB
+:20250000805280A8800F80C880D38000804080A1808D801480DA8002808180E080D980F18E
+:2025200080DB803080A480A680AF000080B080218020807F00E010080810E00000000000B7
+:20254000000F102020100F0000000000001010F800000000000000000020203F2020000026
+:2025600000000000007008080888700000000000003028242221300000000000003008882C
+:2025800088483000000000000018202020110E00000000000000C02010F8000000000000BC
+:2025A00000070424243F24000000000000F8088888080800000000000019212020110E00AC
+:2025C0000000000000E010888818000000000000000F112020110E0000000000003808081C
+:2025E000C8380800000000000000003F000000000000000000708808088870000000000094
+:20260000001C222121221C000000000000E010080810E000000000000000312222110F0077
+:20262000000000000000000000000000000000000030300000000000000000007047424AF7
+:20264000012903D10146104600F0FBB819B90146104600F0F8B8704780B501210820FFF701
+:202660008AF8C020ADF8000014208DF8030003208DF8020000A9344800F07EF800F00EF86C
+:2026800000F055F800F056F800F057F8002100F04FF800F052F800F001F801BD00214020C6
+:2026A000CDE780B5FFF7FAFF002100F041F800F044F800F03FF800F040F800F038F800F06D
+:2026C0003CF8FFF7EBFF0520BDE80240B6E738B50446082508E000F02BF800F02EF800F0D8
+:2026E00029F800F02AF864002846451EC0B230B1FFF7D4FF20064CBF01210021EBE7FFF71A
+:20270000CDFF00F014F8FF2400F017F800F017F848B900F00FF800F010F8FFF7BFFF00F03C
+:202720000CF8012032BD641EEED1002032BD0121802084E70121402081E705207EE78021F3
+:20274000014800F077B80000000C014070B504460D461646FFF780FF7000C0B201E014F862
+:20276000010BFFF7B4FF2846451EC0B20028F6D1BDE8704095E700002DE9F0410022CC78F4
+:2027800004F00F03E40644BF8C7823430C8801250F26E7B217B3D0F800C005FA02F7BE4606
+:2027A0000EEA0408F04514D14FEA820E06FA0EF82CEA080C03FA0EFE4EEA0C0C91F803E03D
+:2027C000BEF1280F08BF476103D0BEF1480F08BF0761521C082AE0D3C0F800C0B4F5807F29
+:2027E00026D3D0F804C0002202F1080705FA07F7BE460EEA0408F04515D14FEA820E06FA47
+:202800000EF82CEA080C03FA0EFE4EEA0C0C91F803E0BEF1280F08BF476191F803E0BEF153
+:20282000480F08BF0761521C082ADDD3C0F804C0BDE8F08100228068084218BF012210468C
+:2028400070470161704741617047000080B500F0F8F88B48006800218172FEF769FC8948C0
+:20286000002141604FF40441874A1180016087480021016001BD10B58548002181728048CE
+:2028800000688449C97941720020FEF7C3FC4FF400710020FEF7C5FC20210020FEF7CBFC93
+:2028A00018210020FEF72EFD7B4C00F042F858210020FEF726FD0020FEF7F1FC0020FEF7E6
+:2028C000E2FC00210120FEF7ACFC98210120FEF718FD20210120FEF7AEFC00210120FEF71F
+:2028E000BBFC00210220FEF79CFCD8210220FEF709FD94F82C100220FEF71AFD4FF4405171
+:202900000220FEF7A9FC00210220FEF794FC00F010F80020FEF7B7FC0020FFF7E4FC5B48DA
+:20292000012101605D485E4901605E480021017010BD94F82C100020FEF7FABC50480068CF
+:20294000807A00B9704780B55048052101600120FEF7C6FC0220FEF7B1FC524800210170F1
+:2029600001BD4E4800684E4988421CBF0220FEF769BE704745480421016070477047704732
+:2029800080B53F4909680A7802F07F02212A08BFFE280BD14888002801BF88880028C888C0
+:2029A000012803D10FF28900020001D1022002BD88610020488200F03BF8002002BD80B5D1
+:2029C0002F4909680A7802F07F02212A08BFFF2815D14888002804BF888800280FD1C888D7
+:2029E00068B90120FEF77CFC0220FEF767FC2B482B4901602B4800210170002002BD022060
+:202A000002BD00290CBF0028022070472649FFF708BA2649FFF705BA19490968C978062974
+:202A200001DB00207047224A02EBC101FFF7F9B928B91348006801210182002070471D489B
+:202A400070471D4801684268806801B9704710B51A4B99700C0A1C710C0C9C71090E197251
+:202A60009A72110A1973110C9973110E19749874010A1975010C9975000E187610BD0000A5
+:202A8000BC2C0020405C0040142D0020042D0020A02C0020E42C0008D8000020742C0020E4
+:202AA00055534243942C0020C8010020D001002008010020002D0020E8F7FF1F5401002047
+:202AC0002DE9F84F0020ADF8000040F68F7848F60F7B48F28006444F444CDFF81491DFF899
+:202AE00014A14BF6BF7525E054F82010ADF80010BDF8001009040BD554F8201008EA010154
+:202B000044F820103C4901EB800050F8040C8047BDF8000000060DD599F8000054F820108F
+:202B20000BEA010144F82010344901EB800050F8040C8047606CAAF80000000452D5BAF8DF
+:202B4000000010F00F0089F80000CDD120683880388800F030007880388800F44050388033
+:202B60002068284080F4005080F0200030432060BAF80000C006206805D40BEA00002060D0
+:202B8000FFF756FB16E0ADF80000BDF80000000506D5206808EA00002060FFF715FB09E0D5
+:202BA000BDF800000004C5D5206808EA00002060FFF761FB206828403988C90448BF80F47D
+:202BC00080503988890448BF80F400507988C90648BF80F010007988890648BF80F020008E
+:202BE00030432060BDE8F18F0C2D0020005C0040182D0020122D00208C01002070010020C6
+:202C00002E48016841F00101016041682C4A1140416001682B4A11400160016821F4802181
+:202C20000160416821F4FE0141604FF41F0181600021026842F4803202600268491C920358
+:202C400002D4B1F5A06FF8D10168890330D51E490A6842F010020A600A68920892000A6097
+:202C60000A6842F002020A604168416041684160416841F480614160416821F47C11416062
+:202C8000416841F4E8114160016841F08071016001688901FCD541688908890041604168FF
+:202CA00041F002014160416801F00C010829FAD106484FF000610160704700000010024044
+:202CC0000000FFF8FFFFF6FE0020024008ED00E0120100020000004083042057000201027C
+:202CE0000301000009022000010100C0320904000002080650040705810240000007050263
+:202D000002400000040309042603530054004D006900630072006F0065006C0065006300FA
+:202D2000740072006F006E0069006300730000002603530054004D003300320020004D00A2
+:202D40006100730073002000530074006F007200610067006500000010035300540020005D
+:202D60004D00610073007300FEF760F9FEF7BCF91A48006880070ED5FEF773F8184801686A
+:202D8000184A1140B1F1005F04D144680068FEF749F9A047FEE70A20FEF716F90020FEF750
+:202DA00020F9C820FEF710F90120FEF71AF90020FEF780F9FEF7D4F9FDF7BAF9FFF72CFBD7
+:202DC000FFF775FB0FF22000FFF7CCFAFEF71EFDFDF7A8FAFDF7B7FBF8E70000080C014030
+:202DE000004000080000FF2F332E34350000000070B50D4C0D4D286820800D4E20883188CF
+:202E00000840400505D50B48406880474FF6FF302860208831880840000444BFBDE8704088
+:202E2000FFF74EBE70BD0000122D0020445C0040142D0020D8000020FEF7CABAFEF7E9BABA
+:202E400010B5074979441831064C7C44163404E0081D0A68511888470146A142F8D110BD88
+:202E6000080000002800000037E1FFFF302B0000EC0100200000000083E0FFFFEC01000056
+:202E80009401000000000020000000007047FEE7FEE7FEE7FEE77047704770477047FFF760
+:202EA000A7BF000000F009F8002801D0FFF7C8FF0020FFF759FF00F002F80120704700F0E5
+:202EC00001B800000746384600F002F8FBE70000C046C046024A11001820ABBEFBE700BFF7
+:202EE000260002000148804701480047012C0008F52E0008C046C046C046C046FFF7D2FFCB
+:202F0000FFF7C4BFFFF7C3BFFFF7C2BFFFF7C1BFFFF7C0BFFFF7BFBFFFF7BEBFFFF7BDBF05
+:202F2000FFF7BCBFFFF7FEBFFFF7FEBFFFF7FEBFFFF7FEBFFFF7FEBFFFF7FEBFFFF7FEBF3B
+:202F4000FFF7FEBFFFF7FEBFFFF7FEBFFFF7FEBFFFF7FEBFFFF7FEBFFFF7FEBFFFF7FEBFD9
+:202F6000FFF7FEBFFFF7FEBFFFF7FEBFFFF7FEBFFFF7FEBFFFF793BFFFF7FEBFFFF7FEBF24
+:202F8000FFF7FEBFFFF7FEBFFFF7FEBFFFF7FEBFFFF7FEBFFFF7FEBFFFF7FEBFFFF7FEBF99
+:202FA000FFF7FEBFFFF7FEBFFFF7FEBFFFF7FEBFFFF7FEBFFFF7FEBFFFF7FEBFFFF7FEBF79
+:202FC000FFF7FEBFFFF7FEBFFFF7FEBFFFF7FEBFFFF7FEBFFFF7FEBFFFF7FEBFFFF7FEBF59
+:202FE000FFF7FEBFFFF7FEBFFFF7FEBFFFF7FEBFFFF7FEBFFFF7FEBFFFF7FEBFFFF7FEBF39
+:20300000FFF7FEBFFFF7FEBFFFF7FEBFFFF7FEBFFFF7FEBF04FC040404040C0810E000001D
+:20302000407F404040406020180F000004FC8484848484E40C100000407F40000000000394
+:203040000000000004FC04000000000004FC0400001F204040404040201F000000000000AA
+:20306000606000000000000000000000606000000000000000780404040404887800000044
+:20308000006050484442414070000000000000000000000000000000006060000000000001
+:2030A0000000000000E018080404040818E00000000F302040404020300F0000000000087E
+:2030C00008FC00000000000000000040407F4040400000000000000000000000000000002D
+:2030E0000000000000000000000000004D280008772800087D2900087F290008812900089C
+:20310000BF290008032A00080D2A0008132A0008192A00080000000040000000042D000842
+:2031200004000000082D000826000000302D000826000000540100201A000000582D000881
+:2031400010000000612300083D2900086123000861230008612300086329000861230008A1
+:2031600061230008752900081A03530054004D003300320031003000000000000000000046
+:2031800000000000392E000861230008612300086123000861230008612300086123000878
+:2031A000612300083D2E0008612300086123000861230008612300086123000870000000E4
+:2031C0000000000A000000000000000000000000000000080000000002000000D02C0008D7
+:2031E00012000000E42C000820000000000600000000000003010000030000000100000077
+:20320000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFCE
+:20322000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFAE
+:20324000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF8E
+:20326000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF6E
+:20328000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF4E
+:2032A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF2E
+:2032C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF0E
+:2032E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEE
+:20330000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFCD
+:20332000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFAD
+:20334000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF8D
+:20336000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF6D
+:20338000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF4D
+:2033A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF2D
+:2033C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF0D
+:2033E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFED
+:20340000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFCC
+:20342000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFAC
+:20344000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF8C
+:20346000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF6C
+:20348000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF4C
+:2034A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF2C
+:2034C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF0C
+:2034E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEC
+:20350000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFCB
+:20352000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFAB
+:20354000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF8B
+:20356000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF6B
+:20358000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF4B
+:2035A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF2B
+:2035C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF0B
+:2035E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEB
+:20360000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFCA
+:20362000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFAA
+:20364000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF8A
+:20366000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF6A
+:20368000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF4A
+:2036A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF2A
+:2036C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF0A
+:2036E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEA
+:20370000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFC9
+:20372000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFA9
+:20374000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF89
+:20376000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF69
+:20378000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF49
+:2037A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF29
+:2037C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF09
+:2037E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE9
+:20380000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFC8
+:20382000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFA8
+:20384000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF88
+:20386000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF68
+:20388000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF48
+:2038A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF28
+:2038C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF08
+:2038E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE8
+:20390000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFC7
+:20392000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFA7
+:20394000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF87
+:20396000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF67
+:20398000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF47
+:2039A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF27
+:2039C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF07
+:2039E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE7
+:203A0000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFC6
+:203A2000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFA6
+:203A4000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF86
+:203A6000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF66
+:203A8000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF46
+:203AA000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF26
+:203AC000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF06
+:203AE000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE6
+:203B0000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFC5
+:203B2000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFA5
+:203B4000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF85
+:203B6000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF65
+:203B8000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF45
+:203BA000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF25
+:203BC000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF05
+:203BE000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE5
+:203C0000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFC4
+:203C2000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFA4
+:203C4000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF84
+:203C6000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF64
+:203C8000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF44
+:203CA000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF24
+:203CC000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF04
+:203CE000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE4
+:203D0000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFC3
+:203D2000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFA3
+:203D4000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF83
+:203D6000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF63
+:203D8000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF43
+:203DA000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF23
+:203DC000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF03
+:203DE000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE3
+:203E0000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFC2
+:203E2000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFA2
+:203E4000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF82
+:203E6000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF62
+:203E8000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF42
+:203EA000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF22
+:203EC000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF02
+:203EE000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE2
+:203F0000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFC1
+:203F2000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFA1
+:203F4000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF81
+:203F6000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF61
+:203F8000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF41
+:203FA000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF21
+:203FC000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF01
+:203FE000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE1
+:00000001FF

Development Resources/TS80/TS80.ioc

@@ -0,0 +1,348 @@
+#MicroXplorer Configuration settings - do not modify
+ADC1.Channel-31\#ChannelRegularConversion=ADC_CHANNEL_4
+ADC1.Channel-32\#ChannelInjectedConversion=ADC_CHANNEL_2
+ADC1.Channel-33\#ChannelInjectedConversion=ADC_CHANNEL_2
+ADC1.Channel-34\#ChannelInjectedConversion=ADC_CHANNEL_2
+ADC1.Channel-35\#ChannelInjectedConversion=ADC_CHANNEL_2
+ADC1.ContinuousConvMode=DISABLE
+ADC1.DataAlign=ADC_DATAALIGN_RIGHT
+ADC1.DiscontinuousConvMode=DISABLE
+ADC1.EnableAnalogWatchDog=false
+ADC1.EnableRegularConversion=ENABLE
+ADC1.ExternalTrigConv=ADC_SOFTWARE_START
+ADC1.ExternalTrigInjecConv=ADC_INJECTED_SOFTWARE_START
+ADC1.IPParameters=Rank-31\#ChannelRegularConversion,Channel-31\#ChannelRegularConversion,SamplingTime-31\#ChannelRegularConversion,NbrOfConversionFlag,master,Rank-32\#ChannelInjectedConversion,Channel-32\#ChannelInjectedConversion,SamplingTime-32\#ChannelInjectedConversion,InjectedOffset-32\#ChannelInjectedConversion,Rank-33\#ChannelInjectedConversion,Channel-33\#ChannelInjectedConversion,SamplingTime-33\#ChannelInjectedConversion,InjectedOffset-33\#ChannelInjectedConversion,Rank-34\#ChannelInjectedConversion,Channel-34\#ChannelInjectedConversion,SamplingTime-34\#ChannelInjectedConversion,InjectedOffset-34\#ChannelInjectedConversion,Rank-35\#ChannelInjectedConversion,Channel-35\#ChannelInjectedConversion,SamplingTime-35\#ChannelInjectedConversion,InjectedOffset-35\#ChannelInjectedConversion,InjNumberOfConversion,DataAlign,ScanConvMode,ContinuousConvMode,DiscontinuousConvMode,EnableRegularConversion,NbrOfConversion,ExternalTrigConv,ExternalTrigInjecConv,InjectedConvMode,EnableAnalogWatchDog
+ADC1.InjNumberOfConversion=4
+ADC1.InjectedConvMode=None
+ADC1.InjectedOffset-32\#ChannelInjectedConversion=0
+ADC1.InjectedOffset-33\#ChannelInjectedConversion=0
+ADC1.InjectedOffset-34\#ChannelInjectedConversion=0
+ADC1.InjectedOffset-35\#ChannelInjectedConversion=0
+ADC1.NbrOfConversion=1
+ADC1.NbrOfConversionFlag=1
+ADC1.Rank-31\#ChannelRegularConversion=1
+ADC1.Rank-32\#ChannelInjectedConversion=1
+ADC1.Rank-33\#ChannelInjectedConversion=2
+ADC1.Rank-34\#ChannelInjectedConversion=3
+ADC1.Rank-35\#ChannelInjectedConversion=4
+ADC1.SamplingTime-31\#ChannelRegularConversion=ADC_SAMPLETIME_1CYCLE_5
+ADC1.SamplingTime-32\#ChannelInjectedConversion=ADC_SAMPLETIME_1CYCLE_5
+ADC1.SamplingTime-33\#ChannelInjectedConversion=ADC_SAMPLETIME_1CYCLE_5
+ADC1.SamplingTime-34\#ChannelInjectedConversion=ADC_SAMPLETIME_1CYCLE_5
+ADC1.SamplingTime-35\#ChannelInjectedConversion=ADC_SAMPLETIME_1CYCLE_5
+ADC1.ScanConvMode=ADC_SCAN_ENABLE
+ADC1.master=1
+ADC2.Channel-0\#ChannelRegularConversion=ADC_CHANNEL_3
+ADC2.Channel-1\#ChannelInjectedConversion=ADC_CHANNEL_3
+ADC2.Channel-2\#ChannelInjectedConversion=ADC_CHANNEL_3
+ADC2.Channel-3\#ChannelInjectedConversion=ADC_CHANNEL_3
+ADC2.Channel-4\#ChannelInjectedConversion=ADC_CHANNEL_3
+ADC2.ContinuousConvMode=DISABLE
+ADC2.DataAlign=ADC_DATAALIGN_RIGHT
+ADC2.DiscontinuousConvMode=DISABLE
+ADC2.EnableAnalogWatchDog=false
+ADC2.EnableRegularConversion=ENABLE
+ADC2.ExternalTrigConv=ADC_SOFTWARE_START
+ADC2.IPParameters=Rank-0\#ChannelRegularConversion,Channel-0\#ChannelRegularConversion,SamplingTime-0\#ChannelRegularConversion,NbrOfConversionFlag,Rank-1\#ChannelInjectedConversion,Channel-1\#ChannelInjectedConversion,SamplingTime-1\#ChannelInjectedConversion,InjectedOffset-1\#ChannelInjectedConversion,Rank-2\#ChannelInjectedConversion,Channel-2\#ChannelInjectedConversion,SamplingTime-2\#ChannelInjectedConversion,InjectedOffset-2\#ChannelInjectedConversion,Rank-3\#ChannelInjectedConversion,Channel-3\#ChannelInjectedConversion,SamplingTime-3\#ChannelInjectedConversion,InjectedOffset-3\#ChannelInjectedConversion,Rank-4\#ChannelInjectedConversion,Channel-4\#ChannelInjectedConversion,SamplingTime-4\#ChannelInjectedConversion,InjectedOffset-4\#ChannelInjectedConversion,InjNumberOfConversion,DataAlign,ScanConvMode,ContinuousConvMode,DiscontinuousConvMode,EnableRegularConversion,NbrOfConversion,ExternalTrigConv,EnableAnalogWatchDog
+ADC2.InjNumberOfConversion=0
+ADC2.InjectedOffset-1\#ChannelInjectedConversion=0
+ADC2.InjectedOffset-2\#ChannelInjectedConversion=0
+ADC2.InjectedOffset-3\#ChannelInjectedConversion=0
+ADC2.InjectedOffset-4\#ChannelInjectedConversion=0
+ADC2.NbrOfConversion=1
+ADC2.NbrOfConversionFlag=1
+ADC2.Rank-0\#ChannelRegularConversion=1
+ADC2.Rank-1\#ChannelInjectedConversion=1
+ADC2.Rank-2\#ChannelInjectedConversion=2
+ADC2.Rank-3\#ChannelInjectedConversion=3
+ADC2.Rank-4\#ChannelInjectedConversion=4
+ADC2.SamplingTime-0\#ChannelRegularConversion=ADC_SAMPLETIME_1CYCLE_5
+ADC2.SamplingTime-1\#ChannelInjectedConversion=ADC_SAMPLETIME_1CYCLE_5
+ADC2.SamplingTime-2\#ChannelInjectedConversion=ADC_SAMPLETIME_1CYCLE_5
+ADC2.SamplingTime-3\#ChannelInjectedConversion=ADC_SAMPLETIME_1CYCLE_5
+ADC2.SamplingTime-4\#ChannelInjectedConversion=ADC_SAMPLETIME_1CYCLE_5
+ADC2.ScanConvMode=ADC_SCAN_DISABLE
+Dma.I2C1_RX.0.Direction=DMA_PERIPH_TO_MEMORY
+Dma.I2C1_RX.0.Instance=DMA1_Channel7
+Dma.I2C1_RX.0.MemDataAlignment=DMA_MDATAALIGN_BYTE
+Dma.I2C1_RX.0.MemInc=DMA_MINC_ENABLE
+Dma.I2C1_RX.0.Mode=DMA_NORMAL
+Dma.I2C1_RX.0.PeriphDataAlignment=DMA_PDATAALIGN_BYTE
+Dma.I2C1_RX.0.PeriphInc=DMA_PINC_DISABLE
+Dma.I2C1_RX.0.Priority=DMA_PRIORITY_MEDIUM
+Dma.I2C1_RX.0.RequestParameters=Instance,Direction,PeriphInc,MemInc,PeriphDataAlignment,MemDataAlignment,Mode,Priority
+Dma.I2C1_TX.1.Direction=DMA_MEMORY_TO_PERIPH
+Dma.I2C1_TX.1.Instance=DMA1_Channel6
+Dma.I2C1_TX.1.MemDataAlignment=DMA_MDATAALIGN_BYTE
+Dma.I2C1_TX.1.MemInc=DMA_MINC_ENABLE
+Dma.I2C1_TX.1.Mode=DMA_NORMAL
+Dma.I2C1_TX.1.PeriphDataAlignment=DMA_PDATAALIGN_BYTE
+Dma.I2C1_TX.1.PeriphInc=DMA_PINC_DISABLE
+Dma.I2C1_TX.1.Priority=DMA_PRIORITY_MEDIUM
+Dma.I2C1_TX.1.RequestParameters=Instance,Direction,PeriphInc,MemInc,PeriphDataAlignment,MemDataAlignment,Mode,Priority
+Dma.Request0=I2C1_RX
+Dma.Request1=I2C1_TX
+Dma.RequestsNb=2
+FREERTOS.FootprintOK=true
+FREERTOS.INCLUDE_vTaskDelete=0
+FREERTOS.IPParameters=Tasks01,configTICK_RATE_HZ,configMAX_PRIORITIES,configMINIMAL_STACK_SIZE,configTOTAL_HEAP_SIZE,INCLUDE_vTaskDelete,FootprintOK
+FREERTOS.Tasks01=GUITask,0,512,StartGUITask,Default,NULL,Dynamic,NULL,NULL;PIDTask,0,256,StartPIDTask,Default,NULL,Dynamic,NULL,NULL;ROTTask,-2,256,StartRotationTask,Default,NULL,Dynamic,NULL,NULL
+FREERTOS.configMAX_PRIORITIES=4
+FREERTOS.configMINIMAL_STACK_SIZE=256
+FREERTOS.configTICK_RATE_HZ=100
+FREERTOS.configTOTAL_HEAP_SIZE=10240
+File.Version=6
+I2C1.DutyCycle=I2C_DUTYCYCLE_2
+I2C1.I2C_Mode=I2C_Fast
+I2C1.IPParameters=I2C_Mode,DutyCycle
+IWDG.IPParameters=Prescaler
+IWDG.Prescaler=IWDG_PRESCALER_256
+KeepUserPlacement=false
+Mcu.Family=STM32F1
+Mcu.IP0=ADC1
+Mcu.IP1=ADC2
+Mcu.IP10=TIM3
+Mcu.IP2=DMA
+Mcu.IP3=FREERTOS
+Mcu.IP4=I2C1
+Mcu.IP5=IWDG
+Mcu.IP6=NVIC
+Mcu.IP7=RCC
+Mcu.IP8=SYS
+Mcu.IP9=TIM2
+Mcu.IPNb=11
+Mcu.Name=STM32F103T(8-B)Ux
+Mcu.Package=VFQFPN36
+Mcu.Pin0=PA0-WKUP
+Mcu.Pin1=PA2
+Mcu.Pin10=PA11
+Mcu.Pin11=PA12
+Mcu.Pin12=PA13
+Mcu.Pin13=PA14
+Mcu.Pin14=PA15
+Mcu.Pin15=PB3
+Mcu.Pin16=PB4
+Mcu.Pin17=PB5
+Mcu.Pin18=PB6
+Mcu.Pin19=PB7
+Mcu.Pin2=PA3
+Mcu.Pin20=VP_FREERTOS_VS_ENABLE
+Mcu.Pin21=VP_IWDG_VS_IWDG
+Mcu.Pin22=VP_SYS_VS_ND
+Mcu.Pin23=VP_SYS_VS_tim1
+Mcu.Pin24=VP_TIM2_VS_ClockSourceINT
+Mcu.Pin25=VP_TIM2_VS_no_output1
+Mcu.Pin26=VP_TIM2_VS_no_output3
+Mcu.Pin27=VP_TIM3_VS_ClockSourceINT
+Mcu.Pin28=VP_TIM3_VS_no_output4
+Mcu.Pin3=PA4
+Mcu.Pin4=PA6
+Mcu.Pin5=PB0
+Mcu.Pin6=PB1
+Mcu.Pin7=PA8
+Mcu.Pin8=PA9
+Mcu.Pin9=PA10
+Mcu.PinsNb=29
+Mcu.ThirdPartyNb=0
+Mcu.UserConstants=
+Mcu.UserName=STM32F103T8Ux
+MxCube.Version=4.26.0
+MxDb.Version=DB.4.0.260
+NVIC.BusFault_IRQn=true\:0\:0\:false\:false\:true\:false\:true
+NVIC.DMA1_Channel6_IRQn=true\:5\:0\:false\:false\:true\:true\:true
+NVIC.DMA1_Channel7_IRQn=true\:5\:0\:false\:false\:true\:true\:true
+NVIC.DebugMonitor_IRQn=true\:0\:0\:false\:false\:true\:false\:true
+NVIC.HardFault_IRQn=true\:0\:0\:false\:false\:true\:false\:true
+NVIC.I2C1_ER_IRQn=true\:5\:0\:false\:false\:true\:true\:true
+NVIC.I2C1_EV_IRQn=true\:5\:0\:false\:false\:true\:true\:true
+NVIC.MemoryManagement_IRQn=true\:0\:0\:false\:false\:true\:false\:true
+NVIC.NonMaskableInt_IRQn=true\:0\:0\:false\:false\:true\:false\:true
+NVIC.PendSV_IRQn=true\:15\:0\:false\:false\:false\:true\:true
+NVIC.PriorityGroup=NVIC_PRIORITYGROUP_4
+NVIC.SVCall_IRQn=true\:0\:0\:false\:false\:false\:false\:true
+NVIC.SysTick_IRQn=true\:15\:0\:false\:false\:true\:true\:true
+NVIC.TIM1_UP_IRQn=true\:0\:0\:false\:false\:true\:false\:true
+NVIC.TimeBase=TIM1_UP_IRQn
+NVIC.TimeBaseIP=TIM1
+NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:false\:true
+PA0-WKUP.GPIOParameters=GPIO_Label
+PA0-WKUP.GPIO_Label=RM
+PA0-WKUP.Locked=true
+PA0-WKUP.Signal=GPIO_Output
+PA10.GPIOParameters=GPIO_Label
+PA10.GPIO_Label=QC_DM_11K
+PA10.Locked=true
+PA10.Signal=GPIO_Output
+PA11.GPIOParameters=GPIO_Label
+PA11.GPIO_Label=USB_DM
+PA11.Locked=true
+PA11.Signal=GPIO_Analog
+PA12.GPIOParameters=GPIO_Label
+PA12.GPIO_Label=USB_DP
+PA12.Locked=true
+PA12.Signal=GPIO_Analog
+PA13.GPIOParameters=GPIO_Label
+PA13.GPIO_Label=QC_DP_SENSE
+PA13.Locked=true
+PA13.Signal=GPIO_Input
+PA14.GPIOParameters=GPIO_Label
+PA14.GPIO_Label=QC_DM_SENSE
+PA14.Locked=true
+PA14.Signal=GPIO_Input
+PA15.GPIOParameters=GPIO_Label
+PA15.GPIO_Label=OLED_RESET
+PA15.Locked=true
+PA15.Signal=GPIO_Output
+PA2.GPIOParameters=GPIO_Label
+PA2.GPIO_Label=ADC_VIN
+PA2.Locked=true
+PA2.Signal=ADCx_IN2
+PA3.GPIOParameters=GPIO_Label
+PA3.GPIO_Label=ADC_TIP
+PA3.Locked=true
+PA3.Signal=ADCx_IN3
+PA4.GPIOParameters=GPIO_Label
+PA4.GPIO_Label=ADC_TMP36
+PA4.Locked=true
+PA4.Signal=ADCx_IN4
+PA6.GPIOParameters=GPIO_Label
+PA6.GPIO_Label=PWM Out
+PA6.Locked=true
+PA6.Signal=S_TIM3_CH1
+PA8.GPIOParameters=GPIO_Label
+PA8.GPIO_Label=QC_DM_3K
+PA8.Locked=true
+PA8.Signal=GPIO_Output
+PA9.GPIOParameters=GPIO_Label
+PA9.GPIO_Label=MODEL_SEL
+PA9.Locked=true
+PA9.Signal=GPIO_Input
+PB0.GPIOParameters=GPIO_Label
+PB0.GPIO_Label=KEY_A
+PB0.Locked=true
+PB0.Signal=GPIO_Input
+PB1.GPIOParameters=GPIO_Label
+PB1.GPIO_Label=KEY_B
+PB1.Locked=true
+PB1.Signal=GPIO_Input
+PB3.GPIOParameters=GPIO_Label
+PB3.GPIO_Label=QC_DP_3K
+PB3.Locked=true
+PB3.Signal=GPIO_Output
+PB4.GPIOParameters=GPIO_Label
+PB4.GPIO_Label=IMU_INT2
+PB4.Locked=true
+PB4.Signal=GPXTI4
+PB5.GPIOParameters=GPIO_Label
+PB5.GPIO_Label=IMU_INT1
+PB5.Locked=true
+PB5.Signal=GPXTI5
+PB6.GPIOParameters=GPIO_Label
+PB6.GPIO_Label=SCL
+PB6.Mode=I2C
+PB6.Signal=I2C1_SCL
+PB7.GPIOParameters=GPIO_Label
+PB7.GPIO_Label=SDA
+PB7.Mode=I2C
+PB7.Signal=I2C1_SDA
+PCC.Checker=false
+PCC.Line=STM32F103
+PCC.MCU=STM32F103T(8-B)Ux
+PCC.PartNumber=STM32F103T8Ux
+PCC.Seq0=0
+PCC.Series=STM32F1
+PCC.Temperature=25
+PCC.Vdd=3.3
+PinOutPanel.RotationAngle=0
+ProjectManager.AskForMigrate=true
+ProjectManager.BackupPrevious=false
+ProjectManager.CompilerOptimize=3
+ProjectManager.ComputerToolchain=false
+ProjectManager.CoupleFile=false
+ProjectManager.CustomerFirmwarePackage=
+ProjectManager.DefaultFWLocation=true
+ProjectManager.DeletePrevious=true
+ProjectManager.DeviceId=STM32F103T8Ux
+ProjectManager.FirmwarePackage=STM32Cube FW_F1 V1.6.1
+ProjectManager.FreePins=true
+ProjectManager.HalAssertFull=false
+ProjectManager.HeapSize=0x200
+ProjectManager.KeepUserCode=true
+ProjectManager.LastFirmware=true
+ProjectManager.LibraryCopy=1
+ProjectManager.MainLocation=Src
+ProjectManager.PreviousToolchain=SW4STM32
+ProjectManager.ProjectBuild=false
+ProjectManager.ProjectFileName=TS80.ioc
+ProjectManager.ProjectName=TS80
+ProjectManager.StackSize=0x400
+ProjectManager.TargetToolchain=SW4STM32
+ProjectManager.ToolChainLocation=
+ProjectManager.UnderRoot=false
+ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-HAL-true,2-MX_DMA_Init-DMA-false-HAL-true,3-MX_I2C1_Init-I2C1-false-HAL-true,4-SystemClock_Config-RCC-false-HAL-true,5-MX_TIM3_Init-TIM3-false-HAL-true,6-MX_IWDG_Init-IWDG-false-HAL-true,7-MX_TIM2_Init-TIM2-false-HAL-true,8-MX_ADC1_Init-ADC1-false-HAL-true,9-MX_ADC2_Init-ADC2-false-HAL-true
+RCC.ADCFreqValue=8000000
+RCC.ADCPresc=RCC_ADCPCLK2_DIV8
+RCC.AHBFreq_Value=64000000
+RCC.APB1CLKDivider=RCC_HCLK_DIV16
+RCC.APB1Freq_Value=4000000
+RCC.APB1TimFreq_Value=8000000
+RCC.APB2Freq_Value=64000000
+RCC.APB2TimFreq_Value=64000000
+RCC.FCLKCortexFreq_Value=64000000
+RCC.FamilyName=M
+RCC.HCLKFreq_Value=64000000
+RCC.IPParameters=ADCFreqValue,ADCPresc,AHBFreq_Value,APB1CLKDivider,APB1Freq_Value,APB1TimFreq_Value,APB2Freq_Value,APB2TimFreq_Value,FCLKCortexFreq_Value,FamilyName,HCLKFreq_Value,MCOFreq_Value,PLLCLKFreq_Value,PLLMCOFreq_Value,PLLMUL,PLLSourceVirtual,SYSCLKFreq_VALUE,SYSCLKSource,TimSysFreq_Value,USBFreq_Value,USBPrescaler
+RCC.MCOFreq_Value=64000000
+RCC.PLLCLKFreq_Value=64000000
+RCC.PLLMCOFreq_Value=32000000
+RCC.PLLMUL=RCC_PLL_MUL16
+RCC.PLLSourceVirtual=RCC_PLLSOURCE_HSI_DIV2
+RCC.SYSCLKFreq_VALUE=64000000
+RCC.SYSCLKSource=RCC_SYSCLKSOURCE_PLLCLK
+RCC.TimSysFreq_Value=64000000
+RCC.USBFreq_Value=42666666.666666664
+RCC.USBPrescaler=RCC_USBCLKSOURCE_PLL_DIV1_5
+SH.ADCx_IN2.0=ADC1_IN2,IN2
+SH.ADCx_IN2.ConfNb=1
+SH.ADCx_IN3.0=ADC1_IN3,IN3
+SH.ADCx_IN3.1=ADC2_IN3,IN3
+SH.ADCx_IN3.ConfNb=2
+SH.ADCx_IN4.0=ADC1_IN4,IN4
+SH.ADCx_IN4.ConfNb=1
+SH.GPXTI4.0=GPIO_EXTI4
+SH.GPXTI4.ConfNb=1
+SH.GPXTI5.0=GPIO_EXTI5
+SH.GPXTI5.ConfNb=1
+SH.S_TIM3_CH1.0=TIM3_CH1,PWM Generation1 CH1
+SH.S_TIM3_CH1.ConfNb=1
+TIM2.Channel-PWM\ Generation1\ No\ Output=TIM_CHANNEL_1
+TIM2.Channel-PWM\ Generation3\ No\ Output=TIM_CHANNEL_3
+TIM2.IPParameters=Channel-PWM Generation1 No Output,Channel-PWM Generation3 No Output
+TIM3.Channel-Output\ Compare4\ No\ Output=TIM_CHANNEL_4
+TIM3.Channel-PWM\ Generation1\ CH1=TIM_CHANNEL_1
+TIM3.ClockDivision=TIM_CLOCKDIVISION_DIV4
+TIM3.IPParameters=Channel-PWM Generation1 CH1,OCFastMode_PWM-PWM Generation1 CH1,ClockDivision,Prescaler,Period,Channel-Output Compare4 No Output,OCMode_4,Pulse-Output Compare4 No Output
+TIM3.OCFastMode_PWM-PWM\ Generation1\ CH1=TIM_OCFAST_ENABLE
+TIM3.OCMode_4=TIM_OCMODE_ACTIVE
+TIM3.Period=65535
+TIM3.Prescaler=2000
+TIM3.Pulse-Output\ Compare4\ No\ Output=65000
+VP_FREERTOS_VS_ENABLE.Mode=Enabled
+VP_FREERTOS_VS_ENABLE.Signal=FREERTOS_VS_ENABLE
+VP_IWDG_VS_IWDG.Mode=IWDG_Activate
+VP_IWDG_VS_IWDG.Signal=IWDG_VS_IWDG
+VP_SYS_VS_ND.Mode=No_Debug
+VP_SYS_VS_ND.Signal=SYS_VS_ND
+VP_SYS_VS_tim1.Mode=TIM1
+VP_SYS_VS_tim1.Signal=SYS_VS_tim1
+VP_TIM2_VS_ClockSourceINT.Mode=Internal
+VP_TIM2_VS_ClockSourceINT.Signal=TIM2_VS_ClockSourceINT
+VP_TIM2_VS_no_output1.Mode=PWM Generation1 No Output
+VP_TIM2_VS_no_output1.Signal=TIM2_VS_no_output1
+VP_TIM2_VS_no_output3.Mode=PWM Generation3 No Output
+VP_TIM2_VS_no_output3.Signal=TIM2_VS_no_output3
+VP_TIM3_VS_ClockSourceINT.Mode=Internal
+VP_TIM3_VS_ClockSourceINT.Signal=TIM3_VS_ClockSourceINT
+VP_TIM3_VS_no_output4.Mode=Output Compare4 No Output
+VP_TIM3_VS_no_output4.Signal=TIM3_VS_no_output4
+board=TS100

README.md

@@ -1,152 +1,106 @@
-# TS100
-This is a complete rewrite of the open source software for the ts100 soldering iron.
-The version two fork of this code has no shared code with the original firmware from Miniware (E-design) group.
-This project is considered feature complete for use as a soldering iron, *so please suggest any feature improvements you would like!*
+# TS100 & TS80 Firmware
 
-A short(ish) video that goes through every single menu option in the firmware is available [over here](https://www.youtube.com/watch?v=WlnpboYfxNk). 
-This video was created on an earlier 1.x version of the firmware, so alot has changed and a new video will be coming soon for the 2.x fork.
+This firmware is a fresh start for these soldering irons. Designed from the ground up as fully featured control software that leaves nothing to be desired.
+It originally started back back at the end of 2016 and has since seen vast improvements, especially some very smart work by community members.
+
+The firmware supports everything you would expect in the soldering iron, and has the same features as the stock firmware with some nice extras packed in.
+There is a comprehensive menu system in the iron that allows for adjustment of all the settings on the unit, and support for various languages is added by the communitiy.
+
+On the TS100 there are settings to allow you to specify a cutoff voltage for different lithium iron battery packs to protect your power source.
+For the TS80 these are removed and replaced with the selection of 18W or 24W depending on what your QC power bank can support.
+Otherwise both systems work very similar and should support all the features.
+
+This project is considered feature complete for use as a soldering iron, *so please suggest any feature improvements you would like!*
 
 *This firmware does **NOT** support the usb port while running for changing settings. This is done through the onscreen menu only. Logos are edited using the tool or python script and uploaded in DFU mode.*
 
-*Please note that when running the iron off a Lithium battery pack, the Iron is only rated to 24V input. So using a fully charged 6S battery *slightly* exceeds this rating, and is done so at your own risk.
-Please calibrate your irons voltage reading when you are using a lithium battery after any firmware upgrades.*
+## Core Features
 
-## Features
 * PID iron temperature control
 * Automatic sleep with selectable sensitivity
 * Motion wake support
 * Settings menu on the unit
-* Set a voltage lower limit for Lithium batteries so you dont kill your battery pack
+* (TS100) Set a voltage lower limit for Lithium batteries so you dont kill your battery pack
+* (TS80 ) Set 18W or 24W settings for your power bank
 * All settings saved to flash when you exit the menu
 * Improved readability Fonts
 * Use hardware features to improve reliability
 * Can disable movement detection if desired
-* Calibration of the thermocouple offset
+* Full tip profile calibration
 * Boost mode lets you temporarily change the temperature when soldering (ie raise temperature for short periods of time)
-* Battery charge level indicatior if power source set to a lipo cell count.
-* Custom bootup logo support
+* (TS100) Battery charge level indicator if power source set to a lipo cell count.
+* (TS80) Power bank operating voltage is displayed.
+* Custom boot up logo support.
 * Automatic LCD rotation based on orientation
+* Supports both the version 1 and version 2 hardware (different accelerometers)
 
-## Upgrading your ts100 iron
+# Upgrading your iron
 
-This is completely safe, if it goes wrong just put the .hex file from the official website onto the unit and your back to the old firmware. Downloads for the hex files to flash are available on the [releases page.](https://github.com/Ralim/ts100/releases) The file you want is called *ts100.hex* unless you want the translations, they are ts100_*language short name*.hex.
+This is completely safe, if it goes wrong just put the .hex file from the official website onto the unit and your back to the old firmware. Downloads for the hex files to flash are available on the [releases page.](https://github.com/Ralim/ts100/releases) The file you want is called *(MODEL)_EN.hex* unless you want the translations, they are (MODEL)_*language short name*.hex. Where (MODEL) is either TS100 or TS80.
 
-Officially the bootloader on the iron only works under windows. However, users have reported that it does work under Mac, and can be made to work under Linux *sometimes*. Details over on the [wiki page](https://github.com/Ralim/ts100/wiki/Upgrading-Firmware).
+Officially the bootloader on the iron only works under Windows. However, users have reported that it does work under Mac, and can be made to work under Linux *sometimes*. Details over on the [wiki page](https://github.com/Ralim/ts100/wiki/Upgrading-Firmware).
 
+```
 1. Hold the button closest to the tip, and plug in the USB to the computer.
 2. The unit will appear as a USB drive.
 3. Drag the .hex file onto the USB drive.
 4. The unit will disconnect and reconnect.
 5. The filename will have changed to end in .RDY or .ERR 
 6. If it ends with .RDY you're done! Otherwise something went wrong.
-7. Disconnect the USB and power up the iron. You're good to go.
+7. If it didnt work the first time, try copying the file again without disconnecting the iron, often it will work on the second shot.
+8. Disconnect the USB and power up the iron. You're good to go.
+```
 
-For the more adventurerous out there, you can also load this firmware onto the device using a SWD programmer.
+
+For the more adventurous out there, you can also load this firmware onto the device using a SWD programmer.
 On the bottom of the MCU riser pcb, there are 4 pads for programming.
-There is a complete device flash backup included in this repository. (Note this includes the bootloader, so will need a SWD programmer to load onto the unit). Please do not use the backup of the bootloader for anything malicious, its only saved here for those who are tinkering with their iron and decide to replace it.
+There is a complete device flash backup included in this repository. (Note this includes the bootloader, so will need a SWD programmer to load onto the unit).
+For the TS80 the SWD pins are used for the QC negotiation, so you can actually connect to the SWD power via the USB connector
 
 ## Setting a custom bootup image
 
 This firmware uses a different method of updating the bootup image.
 This removes the need for emulating a USB drive on the iron just to allow for a bootup image to be setup.
-There are further instructions on the [wiki](https://github.com/Ralim/ts100/wiki/Logo-Editor). Instructions are kept on the wiki so that users can update the information if they find extra helpful information.
+There are further instructions on the [wiki](https://github.com/Ralim/ts100/wiki/Logo-Editor). 
+Instructions are kept on the wiki so that users can update the information if they find extra helpful information.
 
-## New Menu System
+# Menu System
 
 This new firmware uses a new menu system to allow access to the settings on the device.
 When on the main screen, the unit shows prompts for the two most common operations.
+
 * Pressing the button near the tip enters soldering mode
 * Pressing the button near the USB enters the settings menu.
 * Holding the button near the tip will enter soldering temperature adjust mode (This is the same as the one in the soldering menu, just to let you edit before heating up).
 * Holding the button near the USB end will show the firmware version details.
-## Soldering mode
-
-In this mode the iron works as you would expect, pressing either button will take you to a temperature change screen. 
-Use each button to go up and down in temperature. Pressing both buttons will exit you from the temperature menu (or wait 3 seconds and it will time out).
-Pressing both buttons or holding the button near the USB will exit the soldering mode.
-Holding the button at the front of the iron will enter boost mode (if enabled).
-
-## Settings Menu
-
-This menu allows you to cycle through all the options and set their values.
-The button near the USB cycles through the options, and the one near the tip changes the selected option.
-Note that settings are not saved until you exit the menu, and some settings such as screen flip do not apply until a power cycle is applied.
-If you leave the unit alone (ie don't press any buttons) on a setting, after 3 seconds the screen will scroll a longer version of the name
-
-* PWRSC -> Power source, select a cell count if using a LiPo, or DC to disable the shutdown. (Sets it to minimum of 10V).
-* STMP -> The temperature the unit drops to in sleep mode
-* SLTME -> Sleep time, how long it takes before the unit goes to sleep
-* SHTME -> Shutdown Time, how long the unit will wait after movement before shutting down completely
-* MSENSE -> Motion Sensitivity,0*9,0 means motion sensing is turned off, 9 is most sensitive, 1 is least sensitive (ie takes more movement to trigger)
-* ADVDSP -> Enable the advanced display (shows more details)
-* DSPROT -> Display rotation mode, Automatic, Left handed or Right handed
-* BOOST -> Enable boost mode
-* BTMP -> Set the temperature for the boost mode
-* ASART -> Automatically start the unit when power is applied (i.e. the unit will go straight into soldering mode)
-* CLBLNK -> Blink the screen as an alert when cooling down
-* TMP CAL -> Use to calibrate offset on the tip temperature
-* RESET -> Use to force a complete reset on exit of the settings menu
-* TMPUNIT -> Temperature unit, C or F
-
-### Calibrating input voltage
-
-Due to the tolerance on the resistors used for the input voltage divider, some irons can be up to 0.6V out on the voltage measurement.
-Please calibrate your iron if you have any issues with the cutoff voltage. 
-Note that cutoff messages can also be triggered by using a power supply that is too weak and fails under the load of the iron.
-This is more critical than before with the new cell count based cutout voltage.
-
-To calibrate your Iron:
-
-1. Measure the input voltage with a multimeter and note it down.
-2. Connect the input to your iron.
-3. On the home screen (showing iron symbol), press both buttons simultainiously.
-4. The iron will now show the tip temperature.
-5. Press the button near the soldering iron tip.
-6. The screen will display the measured input voltage.
-7. If this is the same as what you measured before skip to step 13
-8. Otherwise, press the button near the USB end of the iron
-9. The voltage will now slowly blink.
-10. Use the buttons to adjust the reading up and down until it reads as close as possible to the voltage you measured earlier.
-11. When it is reading as close as possible, press both buttons at once.
-12. The screen will go back to just showing the input voltage.
-13. Press the button near the tip of the iron to exit back to the live temperature display.
-14. Press both buttons at once to exit back to the idle screen.
-15. You're done. Enjoy your iron.
-
-### Calibrating tip offset
-
-Some tips will have an offset on their readings, to calibrate this out perform the following steps:
-
-1. Connect power to your iron
-2. Make sure the tip is at room temperature (ie. wait for a fair while after using the iron before calibration)
-3. Enter the settings menu
-4. Scroll down to *TMP CAL*
-5. Press the button to change the option (tip button)
-6. The display will start to scroll a warning message to check that the tip is at ambient temperature!
-7. Press the button near the tip of the iron to confirm.
-8. The display will go to "...." for a short period of time as the unit measures the tip temperature and the handle temperature and compares them
-9. The display will then go back to *TMP CAL*
-10. Calibration is done, just exit the settings menu as normal 
-11. You're done. Enjoy your iron.
-
-### Boost mode
-
-This allows you to change the front key (one near the tip) to become a boost button when you hold it for > 2 seconds. This allows you to set this button to change the soldering temperature for short periods. For example when soldering a big joint and you want to boost the temperature a bit.
-
-The boost temperature is set in the settings menu.
 
+More details are over in the [Menu information.](menu.md)
 
 ## Thanks
 
-If you love this firmware and want to continue my caffine addiction, you can do so here (or email me for other options) : https://paypal.me/RalimTek
+
+If you love this firmware and want to continue my caffeine addiction, you can do so here (or email me for other options) : https://paypal.me/RalimTek
+I also want to should out to all of the [Fantastic Contributors](https://github.com/Ralim/ts100/graphs/contributors).
+
+Especially to the following users, who have helped in various ways that are massively appreciated.:
+
+* [dhiltonp](https://github.com/dhiltonp)
+* [Mrkvozrout](https://github.com/Mrkvozrout)
+* [jonnieZG](https://github.com/jonnieZG)
+* [federck](https://github.com/federck)
+* [jvitkauskas](https://github.com/jvitkauskas)
+* [doegox](https://github.com/doegox)
+* [perillamint](https://github.com/perillamint)
+
 
 ## Licence
 
 The code in this repository that is based on the STM tools is under a BSD like licence.
-The code created by the communitiy is GNU GPLv3.
+The code created by the community is GNU GPLv3. Unless noted elsewhere.
 The FreeRToS is under its own licence.
 
 ## Commercial Use
 
 This software is provided as-is, so I cannot provide any commercial support for the firmware. However you are more than welcome to distribute links to the firmware, or provide irons with this software on them. 
 Please do not re-host the files, but rather link to this page, so that there are not old versions of the firmware scattered around. If this firmware does make you money, it would be nice to recieve a donation, however there is no enforcement.
+

Translation Editor/BitmapEditor.html

@@ -0,0 +1,245 @@
+<!doctype html>
+<html>
+<head>
+	<script src="https://cdn.jsdelivr.net/npm/vue/dist/vue.js"></script>
+	<script src="translations_commons.js"></script>
+	<title>TS100 Bitmap Editor</title>
+	<style>
+		.matrix {
+			display: inline-block;
+			padding: 0px 0px 1px 1px ;
+			background-color: #666;
+			margin-top: 1em;
+			margin-bottom: 1em;
+		}
+		
+		.matrix * {
+			font-size:0;
+		}
+		.c {
+			margin:1px 1px 0px 0px;
+			display: inline-block;
+			background-color: #fff;
+			height:10px;
+			width: 10px;
+		}
+		
+		.x {
+			background-color: #000;
+		}
+		
+		.header {
+		}
+		
+		.data input, .data textarea {
+			margin-top: 1em;
+			width: 100%;
+		}
+		
+		.actions {
+		}
+	</style>
+	<script>
+	
+	var ink, pressed, ev;
+	function mousedown(e) {
+		c = window.event.target;
+		classes = c.className.split(" ");
+		if (classes.indexOf("c")<0) {
+			return;
+		}
+		ink = classes.indexOf("x")<0;
+		pressed = true;
+		ev = e;
+		enter(e);
+	}
+	
+	function mouseup(e) {
+		ev = e;
+		pressed = false;
+	}
+	
+	function enter(e) {
+		if (!pressed) {
+			return;
+		}
+		ev = e;
+		c = window.event.target;
+		paint(c, ink);
+		stringFromMatrix();
+	}
+
+	function paint(c, ink) {
+		var cellInk = isInk(c);
+		if (ink) {
+			if (!cellInk) {
+				c.className += " x";
+			}
+		} else {
+			if (cellInk) {
+				c.className = "c";
+			}
+		}
+	}
+
+	function isInk(c) {
+		try {
+			var classes = c.className.split(" ");
+			return classes.indexOf("x") >= 0;
+		} catch(e) {
+			return false;
+		}
+	}
+	
+	function getMatrix() {
+		return document.getElementById("matrix");
+	}
+	
+	function getCoordinatesFromId(str) {
+		i = str.indexOf('_');
+		return {
+			row: parseInt(str.substring(1, i)),
+ 			col: parseInt(str.substring(i+1))
+		}
+	}
+
+	function clearMatrix() {
+		for (var r = 0; r < app.matrix.rows; r++) {
+			for (var c = 0; c < app.matrix.cols; c++) {
+				paint(getCell(r, c), false);
+			}
+		}
+	}
+	
+	function getCell(row, col) {
+		return document.getElementById("C"+row+"_"+col);
+	}
+	
+	function toMatrix(str) {
+		app.encodedData = str;
+		clearMatrix();
+		var strs = str.split(/[ ,]/);
+		var pair = false;
+		var c = 0;
+		var rs = 7;
+		for (var i = 0; i<strs.length; i++) {
+			var d = strs[i];
+			if (d.length > 0) {
+				if (startsWith(d, "0x")) {
+					v = parseInt(d.substring(2), 16);
+				} else {
+					v = parseInt(d);
+				}
+				sv = padLeft(v.toString(2), "0", 8);
+				for (r = 0; r < 8; r++) {
+					paint(getCell(rs - r, c), sv.charAt(r) == '1');
+				}
+				c++;
+				if (c >= app.matrix.cols) {
+					c = 0;
+					rs += 8;
+				}
+			}
+		}
+	}
+
+	function stringFromMatrix() {
+		var str = "";
+		var delim = "";
+		var blocks = app.matrix.rows / 8;
+		var rs = 7;
+		for (var block = 0; block < blocks; block++) {
+			for (var c = 0; c < app.matrix.cols; c++) {
+				var b = 0;
+				for (var r = 0; r < 8; r++) {
+					var cell = document.getElementById("C"+(rs-r)+"_"+c);
+					if (isInk(cell)) {
+						b |= (1 << (7-r));
+					}
+				}
+				str += delim + "0x" + padLeft(b.toString(16).toUpperCase(), "0", 2);
+				delim = ",";
+			}
+			rs += 8;
+		}
+		app.encodedData = str;
+		return str;
+	}
+	
+	function start() {
+		app = new Vue({
+			el : '#app',
+			data : {
+				matrix: {
+					cols: 12,
+					rows: 16
+				},
+				type: "big",
+				encodedData: ""
+			},
+			methods : {
+				VtoMatrix : function(val) {
+					toMatrix(val);
+				},
+				
+				VchangeSize : function() {
+					if (app.type == "big") {
+						app.matrix.cols = 12;
+						app.matrix.rows = 16;
+					} else if (app.type == "small") {
+						app.matrix.cols = 6;
+						app.matrix.rows = 8;
+					} else if (app.type == "icon") {
+						app.matrix.cols = 16;
+						app.matrix.rows = 16;
+					} else if (app.type == "icon24") {
+						app.matrix.cols = 24;
+						app.matrix.rows = 16;
+					} else if (app.type == "screen") {
+						app.matrix.cols = 84;
+						app.matrix.rows = 16;
+					} else if (app.type == "fullscreen") {
+						app.matrix.cols = 96;
+						app.matrix.rows = 16;
+					}
+					stringFromMatrix();
+				}
+				
+			}
+		});
+		toMatrix("0x00,0xF0,0x08,0x0E,0x02,0x02,0x02,0x02,0x0E,0x08,0xF0,0x00,0x00,0x3F,0x40,0x5C,0x5C,0x5C,0x5C,0x5C,0x5C,0x40,0x3F,0x00");
+	}
+
+	window.onload=start; 
+	</script>
+
+	
+</head>
+<body>
+	<div id="app">
+		<div class="header">
+			<select v-model="type" v-on:change="VchangeSize()">
+				<option value="small">Small Font (6x8)</option>
+				<option value="big">Big Font (12x16)</option>
+				<option value="icon">Icon (16x16)</option>
+				<option value="icon24">Icon (24x16)</option>
+				<option value="screen">Screen (84x16)</option>
+				<option value="fullscreen">Full Screen (96x16)</option>
+			</select>
+		</div>
+		<div id="matrix" class="matrix" onmousedown="mousedown(this)" onmouseup="mouseup(this)" ondragstart="return false">
+			<div :id="'R'+(r-1)" class="r" v-for="r in matrix.rows">
+				<div :id="'C'+(r-1)+'_'+(c-1)" class="c" onmouseenter="enter(this)" v-for="c in matrix.cols"></div>
+			</div>
+		</div>
+		<div class="actions">
+			<input type="button" value="Clear" onclick="clearMatrix();stringFromMatrix()">
+		</div>
+		<div class="data">
+			<textarea v-model="encodedData" style="width:100%" v-on:change="VtoMatrix(encodedData)" rows=5>
+		</div>
+	</div>
+		
+	
+</body>
+</html>

Translation Editor/TranslationEditor.html

@@ -0,0 +1,353 @@
+<!DOCTYPE html>
+<html>
+
+	<head>
+		<meta charset="UTF-8">
+		<title>TS100 Translation Editor</title>
+
+		<script src="https://cdn.jsdelivr.net/npm/vue/dist/vue.js"></script>
+		<script src="translations_commons.js"></script>
+		<script src="translations_def.js"></script>
+		<script>
+
+	var app;
+	var defMap = {};
+	
+	function save(){
+		saveJSON(app.current, "translation_"+app.current.languageCode.toLowerCase()+".json");
+	}
+
+	function view(){
+		showJSON(app.current, "translation_"+app.current.languageCode.toLowerCase()+".json");
+	}
+
+	function fileChanged(e) {
+		var target = e;
+		var id = target.id;
+		
+		var file = target.files[0];
+		if (!file) {
+			return;
+		}
+		var fr = new FileReader();
+		fr.onload = function(e) {
+			try {
+				var json = JSON.parse(e.target.result);
+			} catch (ex) {
+				console.log(ex);
+				alert("Invalid JSON file: " + file.name);
+				return;
+			}
+				
+
+			if (id == "referent-lang-file") {
+				if (checkTranslationFile(file.name)) {
+					app.referent = json;
+					app.meta.referentLoaded = true;
+				}
+			} else if (id == "current-lang-file") {
+				if (checkTranslationFile(file.name)) {
+					app.current = json;
+					if (!app.current.cyrillicGlyphs){
+						app.current.cyrillicGlyphs = false;
+					}
+					app.meta.currentLoaded = true;
+				}
+			} 		
+			synchronizeData();
+		}
+		fr.readAsText(file);
+		
+	}
+	
+	function synchronizeData() {
+		app.obsolete = {};
+		copyMissing(app.def.messages, app.referent.messages, app.current.messages);
+		copyMissing(app.def.characters, app.referent.characters, app.current.characters);
+		copyMissing(app.def.menuGroups, app.referent.menuGroups, app.current.menuGroups);
+		copyMissing(app.def.menuOptions, app.referent.menuOptions, app.current.menuOptions);
+	}
+	
+	/**
+	 * Copy all missing properties from referent to current
+	 * for each entry in definition
+	 */
+	function copyMissing(defList, referentMap, currentMap) {
+		if (!isDefined(defList) || !isDefined(referentMap) || !isDefined(currentMap)) {
+			return;
+		}
+		var len = defList.length;
+		for (var i = 0; i < len; i++) {
+			var id = defList[i].id;
+			if (!isDefined(referentMap[id])) {
+				referentMap[id] = '';
+			}
+			if (!isDefined(currentMap[id])) {
+				currentMap[id] = referentMap[id];
+			}
+		}
+		processObsolete(defList, currentMap);
+	}
+
+	// Passes through all entries from the given map.
+	// If a corresponding entry is not found in the defList, it is removed from the map, and added into the obsolete map.
+	function processObsolete(defList, map) {
+		// Index list to map for faster search
+		var defMap = copyArrayToMap(defList);
+		Object.keys(map).forEach(function(key) {
+			if (!isDefined(defMap[key])) {
+				app.obsolete[key] = { id : key, value : map[key]};
+				delete map[key];
+			}
+		});
+	}
+
+	function length(obj, mode) {
+		if (!isDefined(mode) || mode == 0) {
+			// return direct length
+			return obj.length;
+		} else if (mode == 1) {
+			// return length of text property
+			return obj.text.length;
+		} else if (mode == 2) {
+			// return the longest length in text2 array
+			return Math.max(isDefinedNN(obj.text2[0]) ? obj.text2[0].length : 0, isDefinedNN(obj.text2[1]) ? obj.text2[1].length : 0);
+		}
+	}
+	
+	function getAttribute(obj, attribute, isDouble) {
+		var d = isDouble ? "2" : "";
+		var v = obj[attribute+d];
+		if (isDefined(v))
+			return v;
+		return obj[attribute];
+	}
+	
+	function loaded() {
+		app = new Vue({
+			el : '#app',
+			data : {
+				meta : {
+					referentLoaded : false,
+					currentLoaded : false,
+				},
+				def : {
+				},
+				referent : {
+					messages : {}
+				},
+				current : {
+					loaded: false,
+				},
+				obsolete : {},
+				menuDouble : false
+			},
+			methods : {
+				validateInput: function(valMap, id, mode) {
+					var d = defMap[id];
+					var vLen = 0;
+					if (!isDefined(mode))
+						mode = 0;
+						
+					try {
+						// Sum for complex length
+						for (var i = 0; i < d.lenSum.fields.length; i++) {
+							vLen += length(valMap[d.lenSum.fields[i]], mode);
+						}
+						d = d.lenSum;
+					} catch (e) {
+						// Single field length
+						vLen = length(valMap[id], mode);
+					}
+					var maxLen = getAttribute(d, 'maxLen', mode == 2);
+					var minLen = getAttribute(d, 'minLen', mode == 2);
+					var len = getAttribute(d, 'len', mode == 2);
+					if (isNumber(maxLen) && vLen > maxLen
+						|| isNumber(minLen) && vLen < minLen
+						|| isNumber(len) && vLen != len
+						) {
+						return "invalid";
+					}
+				},
+				
+				constraintString: function(e, d) {
+					var str = "";
+					var delim = "";
+					var v;
+					if (!isDefined(d) || d == false) {
+						d = "";
+					} else {
+						d = "2";
+					}
+
+					if (isDefinedNN(e.lenSum)) {
+						str = "len("+(e.lenSum.fields+"").replace(/,/g," + ")+") -> ";
+						e = e.lenSum;
+					}
+					v = getAttribute(e, 'len', d);
+					if (isNumber(v)) {
+						str += delim + "len=" + v;
+						delim = " and ";
+					}
+					v = getAttribute(e, 'minLen', d);
+					if (isNumber(v)) {
+						str += delim + "len>=" + v;
+						delim = " and ";
+					}
+					v = getAttribute(e, 'maxLen', d);
+					if (isNumber(v)) {
+						str += delim + "len<=" + v;
+						delim = " and ";
+					}
+					return str;
+				}
+			}
+		});
+		app.def = def;
+		copyArrayToMap(app.def.messages, defMap);
+		copyArrayToMap(app.def.characters, defMap);
+		copyArrayToMap(app.def.menuGroups, defMap);
+		copyArrayToMap(app.def.menuOptions, defMap);
+	}
+	
+	window.onload=loaded;
+</script>
+	<link href="translations.css" rel="stylesheet" type="text/css">
+	</head>
+	<body>
+
+		<div id="app">
+			<h1>TS100 Translation Editor<span v-if="meta.currentLoaded"> - {{ current.languageLocalName }} [{{current.languageCode}}]</span></h1>
+			<table class="header data">
+				<tr>
+					<td class="label">Referent Language</td>
+					<td class="value">
+						<input type="file" id="referent-lang-file" onchange="fileChanged(this)" accept=".json">
+						<span class="selected" v-if="meta.referentLoaded">{{ referent.languageLocalName }} [{{referent.languageCode}}]</span>
+					</td>
+				</tr>
+				<tr v-if="meta.referentLoaded">
+					<td class="label">Current Language</td>
+					<td class="value">
+						<input type="file" id="current-lang-file" onchange="fileChanged(this)" accept=".json">
+						<span class="selected" v-if="meta.currentLoaded">{{ current.languageLocalName }} [{{current.languageCode}}]</span>
+					</td>
+				</tr>
+				<tr v-if="meta.currentLoaded">
+					<td class="label">Local Language Code</td>
+					<td class="value"><input type="text" v-model="current.languageCode" maxlength="8" v-on:change="current.languageCode=current.languageCode.toUpperCase()" class="short"></td>
+				</tr>
+				<tr v-if="meta.currentLoaded">
+					<td class="label">Local Language Name</td>
+					<td class="value"><input type="text" v-model="current.languageLocalName" class="short"></td>
+				</tr>
+				<tr v-if="meta.currentLoaded">
+					<td class="label">Font table to use</td>
+					<td class="value">
+						<select v-model="current.cyrillicGlyphs" v-on:change="current.cyrillicGlyphs = current.cyrillicGlyphs=='true'">
+							<option value="false">Latin Extended</option>
+							<option value="true">Cyrillic Glyphs</option>
+						</select>
+					</td>
+				</tr>
+			</table>
+			
+			<div v-if="def.messages && referent.messages && current.messages">
+
+				<div class="footer">
+					<input type="button" value="Save" onclick="save()">
+					<input type="button" value="View" onclick="view()">
+				</div>
+				
+				<div v-if="Object.keys(obsolete).length > 0">
+					<h2>Obsolete</h2>
+					<table class="data">
+						<tr v-for="entry in obsolete">
+							<td class="label"><div class="stringId">{{entry.id}}</div></td>
+							<td class="value"><div class="ref">{{entry.value}}</div></td>
+						</tr>
+					</table>
+				</div>
+
+				<h2>Messages and Strings</h2>
+				<table class="data">
+					<tr v-for="message in def.messages" v-bind:class="validateInput(current.messages, message.id)">
+						<td class="label"><div class="stringId">{{message.id}}</div></td>
+						<td class="value">
+							<div class="constraint">{{constraintString(message)}}</div>
+							<div class="ref">{{referent.messages[message.id]}}</div>
+							<div class="note" v-if="message.note">{{message.note}}</div>
+							<div class="tran"><input :id="'in_'+message.id" type="text" v-model="current.messages[message.id]" v-bind:class="{unchanged : current.messages[message.id] == referent.messages[message.id], empty : current.messages[message.id]==''}"></div>
+						</td>
+					</tr>
+				</table>
+
+				<h2>Characters</h2>
+				<table class="data">
+					<tr v-for="char in def.characters" v-bind:class="validateInput(current.characters, char.id)">
+						<td class="label"><div class="stringId">{{char.id}}</div></td>
+						<td class="value">
+							<div class="constraint">{{constraintString(char)}}</div>
+							<div class="ref">{{referent.characters[char.id]}}</div>
+							<div class="tran"><input type="text" v-model="current.characters[char.id]" v-bind:class="{unchanged : current.characters[char.id] == referent.characters[char.id], empty : current.characters[char.id].length != 1}"></div>
+						</td>
+					</tr>
+				</table>
+
+				<h2>Menu Groups</h2>
+				<table class="data">
+					<tr v-for="menu in def.menuGroups" v-bind:class="validateInput(current.menuGroups, menu.id, 2)">
+						<td class="label"><div class="stringId">{{menu.id}}</div></td>
+						<td class="value">
+							<div class="label">Menu Name</div>
+							<div class="constraint">{{constraintString(menu)}}</div>
+							<div class="ref">{{referent.menuGroups[menu.id].text2}}</div>
+							<div class="tran" v-bind:class="{unchanged : current.menuGroups[menu.id].text2[0] == referent.menuGroups[menu.id].text2[0] && current.menuGroups[menu.id].text2[1] == referent.menuGroups[menu.id].text2[1], empty : current.menuGroups[menu.id].text2[0] == '' || current.menuGroups[menu.id].text2[1] == ''}"><input type="text" v-model="current.menuGroups[menu.id].text2[0]"><input type="text" v-model="current.menuGroups[menu.id].text2[1]"></div>
+							<div class="label">Description</div>
+							<div class="ref">{{referent.menuGroups[menu.id].desc}}</div>
+							<div class="tran"><input type="text" v-model="current.menuGroups[menu.id].desc" v-bind:class="{unchanged : current.menuGroups[menu.id].desc == referent.menuGroups[menu.id].desc, empty : current.menuGroups[menu.id].desc == ''}"></div>
+						</td>
+					</tr>
+				</table>
+
+				<h2>Menu Options</h2>
+				<table class="data">
+					<tr>
+						<td class="label">Menu Type</td>
+						<td class="value">
+							<select v-model="current.menuDouble" v-on:change="current.menuDouble = current.menuDouble=='true'">
+								<option value="false">Single-Line</option>
+								<option value="true">Double-Line</option>
+							</select>
+						</td>
+					</tr>
+					<tr v-for="menu in def.menuOptions" v-bind:class="validateInput(current.menuOptions, menu.id, (current.menuDouble ? 2 : 1))">
+						<td class="label"><div class="stringId">{{menu.id}}</div></td>
+						<td class="value">
+							<div v-bind:class="{hidden : current.menuDouble}">
+								<div class="label">Menu Name (Single-Line)</div>
+								<div class="constraint">{{constraintString(menu, current.menuDouble)}}</div>
+								<div class="ref">{{referent.menuOptions[menu.id].text}}</div>
+								<div class="tran"><input type="text" v-model="current.menuOptions[menu.id].text" v-bind:class="{unchanged : current.menuOptions[menu.id].text == referent.menuOptions[menu.id].text, empty : current.menuOptions[menu.id].text == ''}"></div>
+							</div>
+							<div v-bind:class="{hidden : !current.menuDouble}">
+								<div class="label">Menu Name (Double-Line)</div>
+								<div class="constraint">{{constraintString(menu, current.menuDouble)}}</div>
+								<div class="ref">{{referent.menuOptions[menu.id].text2}}</div>
+								<div class="tran" v-bind:class="{unchanged : current.menuOptions[menu.id].text2[0] == referent.menuOptions[menu.id].text2[0] && current.menuOptions[menu.id].text2[1] == referent.menuOptions[menu.id].text2[1], empty : current.menuOptions[menu.id].text2[0] == '' || current.menuOptions[menu.id].text2[1] == ''}"><input type="text" v-model="current.menuOptions[menu.id].text2[0]"><input type="text" v-model="current.menuOptions[menu.id].text2[1]"></div>
+							</div>
+							<div class="label">Description</div>
+							<div class="ref">{{referent.menuOptions[menu.id].desc}}</div>
+							<div class="tran"><input type="text" v-model="current.menuOptions[menu.id].desc" v-bind:class="{unchanged : current.menuOptions[menu.id].desc == referent.menuOptions[menu.id].desc, empty : current.menuOptions[menu.id].desc == ''}"></div>
+						</td>
+					</tr>
+				</table>
+
+				<div class="footer">
+					<input type="button" value="Save" onclick="save()">
+					<input type="button" value="View" onclick="view()">
+				</div>
+			</div>
+		</div>
+	</body>
+</html>

Translation Editor/TranslationsParser.html

@@ -0,0 +1,325 @@
+<!DOCTYPE html>
+<html>
+
+	<head>
+		<meta charset="UTF-8">
+		<title>TS100 Translation Parser</title>
+
+		<script src="https://cdn.jsdelivr.net/npm/vue/dist/vue.js"></script>
+		<script src="translations_commons.js"></script>
+		<script src="translations_def.js"></script>
+		<script>
+
+	var app;
+	var defMap = {};
+	var langMap = {};
+	var lang;
+
+	var defMsgMap;
+	var defCharMap; 	
+	var defGrpMap;	
+	var defOptMap;	
+	
+	function save(langCode){
+		saveJSON(langMap[langCode], "translation_"+langCode.toLowerCase()+".json");
+	}
+
+	function view(langCode){
+		showJSON(langMap[langCode], "translation_"+langCode.toLowerCase()+".json");
+	}
+
+	function translationFileSelected(e) {
+		var target = e;
+		var id = target.id;
+		
+		var file = target.files[0];
+		if (!file) {
+			return;
+		}
+		var fr = new FileReader();
+		fr.onload = function(e) {
+			parseTranslationFile(file.name, e.target.result);
+		}
+		fr.readAsText(file);
+		
+	}
+	
+	function parseTranslationFile(name, src) {
+		// remove multiline comments
+		src = src.replace(/\/\*[\s\S.]*?\*\//mg, "");
+		// remove single-line comments
+		src = src.replace(/\/\/.*/mg, "");
+		// remove empty lines
+		src = src.replace(/^\s*\n/gm, "");
+		
+		var langCode = "";
+		var srcLines = src.split("\n");
+
+		var reMessage = /const\s+char\s*\*\s+([\w\d]+)\s*=\s*"(.*)"/;
+		var reSettingsDescStart = /const\s+char\s*\*\s+SettingsDescriptions\[/;
+		var reSettingsNamesStart = /const\s+char\s*\*\s+SettingsShortNames\[/;
+		var reSettingsMenuDescStart = /const\s+char\s*\*\s+SettingsMenuEntriesDescriptions\[/;
+		var reChar = /const\s+char\s+([\w\d]+)\s*=\s*'(\w)'/;
+		var reMenuMode = /SettingsShortNameType\s*=\s*SHORT_NAME_(\w+)_LINE/;
+		
+		var reMenuStart = /\s*const\s+char\s*\*\s+SettingsMenuEntries\[/;
+
+//		var reString = /^\s*"(.*)"/;
+		var reString = /"(.*)"/;
+		var reSingleLine = /{\s*"(.*)"\s*}/;
+		var reDoubleLine = /{\s*"(.*)"\s*,\s*"(.*)"\s*}/;
+		
+		var mode = '';
+		var entryIndex = 0;
+		for (var li = 0; li < srcLines.length; li++) {
+			// trim lines
+			line = srcLines[li] = srcLines[li].trim();
+			
+			// if entering a new lang block
+			if (startsWith(line, "#ifdef LANG_")) {
+				mode = 'new-language';
+				langCode = line.substring(12);
+				lang = langMap[langCode];
+				// use existing or instantiate new
+				if (!isDefined(lang)) {
+					lang = {
+						languageCode: langCode,
+						cyrillicGlyphs: false,
+						messages: {},
+						characters: {},
+						menuDouble : false,
+						menuGroups: {},
+						menuOptions: {}
+					};
+					langMap[langCode] = lang;
+					app.languages[app.languages.length] = langCode;
+				}
+				entryIndex = 0;
+				continue;
+			}
+
+			// Use Cyrillic glyphs
+			if (startsWith(line, "#define CYRILLIC_GLYPHS")) {
+				lang.cyrillicGlyphs = true;
+				entryIndex = 0;
+				continue;
+			}
+
+			// Menu type
+			reMenuMode.lastIndex = 0;
+			match = reMenuMode.exec(line);
+			if (match) {
+				lang.menuDouble = match[1] == 'DOUBLE';
+				entryIndex = 0;
+				continue;
+			}
+			
+			// Messages
+			reMessage.lastIndex = 0;
+			match = reMessage.exec(line);
+			if (match) {
+				lang.messages[match[1]] = xunescape(match[2]);
+				entryIndex = 0;
+				continue;
+			}
+			
+			// Chars descriptions
+			reChar.lastIndex = 0;
+			match = reChar.exec(line);
+			if (match) {
+				// found description block start
+				mode = 'char';
+				lang.characters[match[1]] = xunescape(match[2]);
+				entryIndex = 0;
+				continue;
+			}
+			// Settings descriptions
+			reSettingsDescStart.lastIndex = 0;
+			match = reSettingsDescStart.exec(line);
+			if (match) {
+				// found description block start
+				mode = 'settingsDesc';
+				entryIndex = 0;
+				continue;
+			}
+			reSettingsNamesStart.lastIndex = 0;
+			match = reSettingsNamesStart.exec(line);
+			if (match) {
+				// found description block start
+				mode = 'settingsNames';
+				entryIndex = 0;
+				continue;
+			}
+			reMenuStart.lastIndex = 0;
+			match = reMenuStart.exec(line);
+			if (match) {
+				// found description block start
+				mode = 'menu';
+				entryIndex = 0;
+				continue;
+			}
+			reSettingsMenuDescStart.lastIndex = 0;
+			match = reSettingsMenuDescStart.exec(line);
+			if (match) {
+				// found description block start
+				mode = 'menuDesc';
+				entryIndex = 0;
+				continue;
+			}
+			
+			if (mode == 'menu') {
+				// processing menu group names
+				reString.lastIndex = 0;
+				match = reString.exec(line);
+				if (match) {
+					// found description string
+					var entry = getMenuGroup(entryIndex);
+					var m = match[1].split("\\n");
+					entry.text2[0] = xunescape(m[0]);
+					entry.text2[1] = xunescape(m[1]);
+					entryIndex++;
+				}
+			} else if (mode == 'menuDesc') {
+				// processing menu group descriptions
+				reString.lastIndex = 0;
+				match = reString.exec(line);
+				if (match) {
+					// found description string
+					var entry = getMenuGroup(entryIndex);
+					entry.desc = xunescape(match[1]);
+					entryIndex++;
+				}
+			} else if (mode == 'settingsDesc') {
+				// processing option descriptions
+				reString.lastIndex = 0;
+				match = reString.exec(line);
+				if (match) {
+					// found description string
+					var entry = getMenuOption(entryIndex);
+					entry.desc = xunescape(match[1]);
+					entryIndex++;
+				}
+			} else if (mode == 'settingsNames') {
+				reDoubleLine.lastIndex = 0;
+				match = reDoubleLine.exec(line);
+				if (match) {
+					var entry = getMenuOption(entryIndex);
+					entry.text2[0] = xunescape(match[1]);
+					entry.text2[1] = xunescape(match[2]);
+					entryIndex++;
+				} else {
+					reSingleLine.lastIndex = 0;
+					match = reSingleLine.exec(line);
+					if (match) {
+						var entry = getMenuOption(entryIndex);
+						entry.text = xunescape(match[1]);
+						entryIndex++;
+					}
+
+				}
+			}
+		}
+		app.done = 1;
+	}
+
+	function getMenuOption(entryIndex) {
+		var optionDef = def.menuOptions[entryIndex];
+		if (!isDefined(optionDef)) {
+			var s = "Could not find menu option with index "+entryIndex;
+			alert(s);
+			throw s;
+		}
+		var id = optionDef.id;
+		var entry = lang.menuOptions[id];
+		if (!isDefined(entry)) {
+			entry =
+			{
+				"text": "",
+				"text2": ["", ""],
+				"desc": ""
+			}
+			lang.menuOptions[id] = entry;
+		}
+		return entry;
+	}
+	
+	function getMenuGroup(entryIndex) {
+		var optionDef = def.menuGroups[entryIndex];
+		if (!isDefined(optionDef)) {
+			var s = "Could not find menu group with index "+entryIndex;
+			alert(s);
+			throw s;
+		}
+		var id = optionDef.id;
+		var entry = lang.menuGroups[id];
+		if (!isDefined(entry)) {
+			entry =
+			{
+				"text2": ["", ""],
+				"desc": ""
+			}
+			lang.menuGroups[id] = entry;
+		}
+		return entry;
+	}
+	
+	function markSaved(lang) {
+		document.getElementById("row_"+lang).classList.add("saved");
+	}
+	
+	function loaded() {
+		app = new Vue({
+			el : '#app',
+			data : {
+				languages: [],
+				done : false,
+				def : {
+				}
+				
+			},
+			methods : {
+				vSave : function(lang) {
+					save(lang);
+					markSaved(lang);
+				},
+				vView : function(lang) {
+					view(lang);
+					markSaved(lang);
+				}
+			}
+		});
+		
+		app.def = def;
+		defMsgMap = copyArrayToMap(app.def.messages);
+		defCharMap = copyArrayToMap(app.def.characters);
+		defGrpMap = copyArrayToMap(app.def.menuGroups);
+		defOptMap = copyArrayToMap(app.def.menuOptions);
+	}
+
+	window.onload=loaded;
+</script>
+	<link href="translations.css" rel="stylesheet" type="text/css">
+	</head>
+	<body>
+
+		<div id="app">
+			<h1>TS100 Translation Parser</h1>
+			<table class="header data">
+				<tr>
+					<td class="label">Translation.cpp</td>
+					<td class="value">
+						<input type="file" id="translation-cpp-file" onchange="translationFileSelected(this)" accept=".cpp">
+					</td>
+				</tr>
+			</table>
+			
+			<div class="data" v-if="done">
+				<div class="value" v-for="lang in languages" :id="'row_'+lang">
+					<input type="button" :value="'Save '+lang" v-on:click="vSave(lang)">
+					<input type="button" :value="'View '+lang" v-on:click="vView(lang)">
+				</div>
+			</div>
+				
+		</div>
+	</body>
+</html>

Translation Editor/fontTables.py

@@ -0,0 +1,844 @@
+#coding=utf-8
+def getFontMap():
+    font = {
+        " ":"0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,",
+        "!":"0x00,0x00,0x00,0x00,0x7C,0xFF,0xFF,0x7C,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x33,0x33,0x00,0x00,0x00,0x00,0x00," ,
+        "\"":"0x00,0x00,0x00,0x3C,0x3C,0x00,0x00,0x3C,0x3C,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,",
+        "#":"0x00,0x00,0x10,0x90,0xF0,0x7E,0x1E,0x90,0xF0,0x7E,0x1E,0x10,0x00,0x02,0x1E,0x1F,0x03,0x02,0x1E,0x1F,0x03,0x02,0x00,0x00," ,
+        "$":"0x00,0x00,0x78,0xFC,0xCC,0xFF,0xFF,0xCC,0xCC,0x88,0x00,0x00,0x00,0x00,0x04,0x0C,0x0C,0x3F,0x3F,0x0C,0x0F,0x07,0x00,0x00," ,
+        "%":"0x00,0x00,0x38,0x38,0x38,0x00,0x80,0xC0,0xE0,0x70,0x38,0x1C,0x00,0x30,0x38,0x1C,0x0E,0x07,0x03,0x01,0x38,0x38,0x38,0x00," ,
+        "&":"0x00,0x00,0x00,0xB8,0xFC,0xC6,0xE2,0x3E,0x1C,0x00,0x00,0x00,0x00,0x00,0x1F,0x3F,0x31,0x21,0x37,0x1E,0x1C,0x36,0x22,0x00," ,
+        "'":"0x00,0x00,0x00,0x00,0x27,0x3F,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00," ,
+        "(":"0x00,0x00,0x00,0xF0,0xFC,0xFE,0x07,0x01,0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x03,0x0F,0x1F,0x38,0x20,0x20,0x00,0x00,0x00," ,
+        "(":"0x00,0x00,0x00,0xF0,0xFC,0xFE,0x07,0x01,0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x03,0x0F,0x1F,0x38,0x20,0x20,0x00,0x00,0x00," ,
+        ")":"0x00,0x00,0x00,0x01,0x01,0x07,0xFE,0xFC,0xF0,0x00,0x00,0x00,0x00,0x00,0x00,0x20,0x20,0x38,0x1F,0x0F,0x03,0x00,0x00,0x00," ,
+        ")":"0x00,0x00,0x00,0x01,0x01,0x07,0xFE,0xFC,0xF0,0x00,0x00,0x00,0x00,0x00,0x00,0x20,0x20,0x38,0x1F,0x0F,0x03,0x00,0x00,0x00," ,
+        "*":"0x00,0x00,0x98,0xB8,0xE0,0xF8,0xF8,0xE0,0xB8,0x98,0x00,0x00,0x00,0x00,0x0C,0x0E,0x03,0x0F,0x0F,0x03,0x0E,0x0C,0x00,0x00," ,
+        "+":"0x00,0x00,0x80,0x80,0x80,0xF0,0xF0,0x80,0x80,0x80,0x00,0x00,0x00,0x00,0x01,0x01,0x01,0x0F,0x0F,0x01,0x01,0x01,0x00,0x00," ,
+        ",":"0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xB8,0xF8,0x78,0x00,0x00,0x00,0x00,0x00," ,
+        "-":"0x00,0x00,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x00,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x00,0x00," ,
+        ".":"0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x38,0x38,0x38,0x00,0x00,0x00,0x00,0x00," ,
+        "/":"0x00,0x00,0x00,0x00,0x00,0x80,0xC0,0xE0,0x70,0x38,0x1C,0x0E,0x00,0x18,0x1C,0x0E,0x07,0x03,0x01,0x00,0x00,0x00,0x00,0x00," ,
+        "0":"0x00,0xF8,0xFE,0x06,0x03,0x83,0xC3,0x63,0x33,0x1E,0xFE,0xF8,0x00,0x07,0x1F,0x1E,0x33,0x31,0x30,0x30,0x30,0x18,0x1F,0x07," ,
+        "1":"0x00,0x00,0x00,0x0C,0x0C,0x0E,0xFF,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x30,0x3F,0x3F,0x30,0x30,0x30,0x00," ,
+        "2":"0x00,0x1C,0x1E,0x07,0x03,0x03,0x83,0xC3,0xE3,0x77,0x3E,0x1C,0x00,0x30,0x38,0x3C,0x3E,0x37,0x33,0x31,0x30,0x30,0x30,0x30," ,
+        "3":"0x00,0x0C,0x0E,0x07,0xC3,0xC3,0xC3,0xC3,0xC3,0xE7,0x7E,0x3C,0x00,0x0C,0x1C,0x38,0x30,0x30,0x30,0x30,0x30,0x39,0x1F,0x0E," ,
+        "З":"0x00,0x0C,0x0E,0x07,0xC3,0xC3,0xC3,0xC3,0xC3,0xE7,0x7E,0x3C,0x00,0x0C,0x1C,0x38,0x30,0x30,0x30,0x30,0x30,0x39,0x1F,0x0E," ,
+        "4":"0x00,0xC0,0xE0,0x70,0x38,0x1C,0x0E,0x07,0xFF,0xFF,0x00,0x00,0x00,0x03,0x03,0x03,0x03,0x03,0x03,0x03,0x3F,0x3F,0x03,0x03," ,
+        "5":"0x00,0x3F,0x7F,0x63,0x63,0x63,0x63,0x63,0x63,0xE3,0xC3,0x83,0x00,0x0C,0x1C,0x38,0x30,0x30,0x30,0x30,0x30,0x38,0x1F,0x0F," ,
+        "6":"0x00,0xC0,0xF0,0xF8,0xDC,0xCE,0xC7,0xC3,0xC3,0xC3,0x80,0x00,0x00,0x0F,0x1F,0x39,0x30,0x30,0x30,0x30,0x30,0x39,0x1F,0x0F," ,
+        "7":"0x00,0x03,0x03,0x03,0x03,0x03,0x03,0xC3,0xF3,0x3F,0x0F,0x03,0x00,0x00,0x00,0x00,0x30,0x3C,0x0F,0x03,0x00,0x00,0x00,0x00," ,
+        "8":"0x00,0x00,0xBC,0xFE,0xE7,0xC3,0xC3,0xC3,0xE7,0xFE,0xBC,0x00,0x00,0x0F,0x1F,0x39,0x30,0x30,0x30,0x30,0x30,0x39,0x1F,0x0F," ,
+        "9":"0x00,0x3C,0x7E,0xE7,0xC3,0xC3,0xC3,0xC3,0xC3,0xE7,0xFE,0xFC,0x00,0x00,0x00,0x30,0x30,0x30,0x38,0x1C,0x0E,0x07,0x03,0x00," ,
+        ":":"0x00,0x00,0x00,0x00,0x70,0x70,0x70,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x1C,0x1C,0x1C,0x00,0x00,0x00,0x00,0x00," ,
+        ":":"0x00,0x00,0x00,0x00,0x70,0x70,0x70,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x1C,0x1C,0x1C,0x00,0x00,0x00,0x00,0x00," ,
+        ";":"0x00,0x00,0x00,0x00,0x70,0x70,0x70,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x9C,0xFC,0x7C,0x00,0x00,0x00,0x00,0x00," ,
+        "<":"0x00,0x00,0xC0,0xE0,0xF0,0x38,0x1C,0x0E,0x07,0x03,0x00,0x00,0x00,0x00,0x00,0x01,0x03,0x07,0x0E,0x1C,0x38,0x30,0x00,0x00," ,
+        "=":"0x00,0x00,0x60,0x60,0x60,0x60,0x60,0x60,0x60,0x60,0x60,0x00,0x00,0x00,0x06,0x06,0x06,0x06,0x06,0x06,0x06,0x06,0x06,0x00," ,
+        ">":"0x00,0x00,0x03,0x07,0x0E,0x1C,0x38,0xF0,0xE0,0xC0,0x00,0x00,0x00,0x00,0x30,0x38,0x1C,0x0E,0x07,0x03,0x01,0x00,0x00,0x00," ,
+        "?":"0x00,0x1C,0x1E,0x07,0x03,0x83,0xC3,0xE3,0x77,0x3E,0x1C,0x00,0x00,0x00,0x00,0x00,0x00,0x37,0x37,0x00,0x00,0x00,0x00,0x00," ,
+        "@":"0x00,0xF8,0xFE,0x07,0xF3,0xFB,0x1B,0xFB,0xFB,0x07,0xFE,0xF8,0x00,0x0F,0x1F,0x18,0x33,0x37,0x36,0x37,0x37,0x36,0x03,0x01," ,
+        "A":"0x00,0x00,0x00,0xE0,0xFC,0x1F,0x1F,0xFC,0xE0,0x00,0x00,0x00,0x00,0x38,0x3F,0x07,0x06,0x06,0x06,0x06,0x07,0x3F,0x38,0x00," ,
+        "А":"0x00,0x00,0x00,0xE0,0xFC,0x1F,0x1F,0xFC,0xE0,0x00,0x00,0x00,0x00,0x38,0x3F,0x07,0x06,0x06,0x06,0x06,0x07,0x3F,0x38,0x00," ,
+        "B":"0x00,0xFF,0xFF,0xC3,0xC3,0xC3,0xC3,0xE7,0xFE,0xBC,0x00,0x00,0x00,0x3F,0x3F,0x30,0x30,0x30,0x30,0x30,0x39,0x1F,0x0F,0x00," ,
+        "C":"0x00,0xF0,0xFC,0x0E,0x07,0x03,0x03,0x03,0x07,0x0E,0x0C,0x00,0x00,0x03,0x0F,0x1C,0x38,0x30,0x30,0x30,0x38,0x1C,0x0C,0x00," ,
+        "D":"0x00,0xFF,0xFF,0x03,0x03,0x03,0x03,0x07,0x0E,0xFC,0xF0,0x00,0x00,0x3F,0x3F,0x30,0x30,0x30,0x30,0x38,0x1C,0x0F,0x03,0x00," ,
+        "E":"0x00,0xFF,0xFF,0xC3,0xC3,0xC3,0xC3,0xC3,0xC3,0x03,0x03,0x00,0x00,0x3F,0x3F,0x30,0x30,0x30,0x30,0x30,0x30,0x30,0x30,0x00," ,
+        "E":"0x00,0xFF,0xFF,0xC3,0xC3,0xC3,0xC3,0xC3,0xC3,0x03,0x03,0x00,0x00,0x3F,0x3F,0x30,0x30,0x30,0x30,0x30,0x30,0x30,0x30,0x00," ,
+        "F":"0x00,0xFF,0xFF,0xC3,0xC3,0xC3,0xC3,0xC3,0xC3,0x03,0x03,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00," ,
+        "G":"0x00,0xF0,0xFC,0x0E,0x07,0x03,0xC3,0xC3,0xC3,0xC7,0xC6,0x00,0x00,0x03,0x0F,0x1C,0x38,0x30,0x30,0x30,0x30,0x3F,0x3F,0x00," ,
+        "H":"0x00,0xFF,0xFF,0xC0,0xC0,0xC0,0xC0,0xC0,0xC0,0xFF,0xFF,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x00," ,
+        "I":"0x00,0x00,0x00,0x03,0x03,0xFF,0xFF,0x03,0x03,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x3F,0x3F,0x30,0x30,0x00,0x00,0x00," ,
+        "J":"0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0xFF,0x00,0x00,0x0E,0x1E,0x38,0x30,0x30,0x30,0x30,0x38,0x1F,0x07,0x00," ,
+        "K":"0x00,0xFF,0xFF,0xC0,0xE0,0xF0,0x38,0x1C,0x0E,0x07,0x03,0x00,0x00,0x3F,0x3F,0x00,0x01,0x03,0x07,0x0E,0x1C,0x38,0x30,0x00," ,
+        "L":"0x00,0xFF,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x30,0x30,0x30,0x30,0x30,0x30,0x30,0x30,0x00," ,
+        "M":"0x00,0xFF,0xFF,0x1E,0x78,0xE0,0xE0,0x78,0x1E,0xFF,0xFF,0x00,0x00,0x3F,0x3F,0x00,0x00,0x01,0x01,0x00,0x00,0x3F,0x3F,0x00," ,
+        "N":"0x00,0xFF,0xFF,0x0E,0x38,0xF0,0xC0,0x00,0x00,0xFF,0xFF,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0x03,0x07,0x1C,0x3F,0x3F,0x00," ,
+        "O":"0x00,0xF0,0xFC,0x0E,0x07,0x03,0x03,0x07,0x0E,0xFC,0xF0,0x00,0x00,0x03,0x0F,0x1C,0x38,0x30,0x30,0x38,0x1C,0x0F,0x03,0x00," ,
+        "P":"0x00,0xFF,0xFF,0x83,0x83,0x83,0x83,0x83,0xC7,0xFE,0x7C,0x00,0x00,0x3F,0x3F,0x01,0x01,0x01,0x01,0x01,0x01,0x00,0x00,0x00," ,
+        "Р":"0x00,0xFF,0xFF,0x83,0x83,0x83,0x83,0x83,0xC7,0xFE,0x7C,0x00,0x00,0x3F,0x3F,0x01,0x01,0x01,0x01,0x01,0x01,0x00,0x00,0x00," ,
+        "Q":"0x00,0xF0,0xFC,0x0E,0x07,0x03,0x03,0x07,0x0E,0xFC,0xF0,0x00,0x00,0x03,0x0F,0x1C,0x38,0x30,0x36,0x3E,0x1C,0x3F,0x33,0x00," ,
+        "R":"0x00,0xFF,0xFF,0x83,0x83,0x83,0x83,0x83,0xC7,0xFE,0x7C,0x00,0x00,0x3F,0x3F,0x01,0x01,0x03,0x07,0x0F,0x1D,0x38,0x30,0x00," ,
+        "S":"0x00,0x3C,0x7E,0xE7,0xC3,0xC3,0xC3,0xC3,0xC7,0x8E,0x0C,0x00,0x00,0x0C,0x1C,0x38,0x30,0x30,0x30,0x30,0x39,0x1F,0x0F,0x00," ,
+        "T":"0x00,0x00,0x03,0x03,0x03,0xFF,0xFF,0x03,0x03,0x03,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0x00,0x00," ,
+        "U":"0x00,0xFF,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0xFF,0x00,0x00,0x07,0x1F,0x38,0x30,0x30,0x30,0x30,0x38,0x1F,0x07,0x00," ,
+        "V":"0x00,0x07,0x3F,0xF8,0xC0,0x00,0x00,0xC0,0xF8,0x3F,0x07,0x00,0x00,0x00,0x00,0x01,0x0F,0x3E,0x3E,0x0F,0x01,0x00,0x00,0x00," ,
+        "W":"0x00,0xFF,0xFF,0x00,0x00,0x80,0x80,0x00,0x00,0xFF,0xFF,0x00,0x00,0x3F,0x3F,0x1C,0x06,0x03,0x03,0x06,0x1C,0x3F,0x3F,0x00," ,
+        "X":"0x00,0x03,0x0F,0x1C,0x30,0xE0,0xE0,0x30,0x1C,0x0F,0x03,0x00,0x00,0x30,0x3C,0x0E,0x03,0x01,0x01,0x03,0x0E,0x3C,0x30,0x00," ,
+        "Y":"0x00,0x03,0x0F,0x3C,0xF0,0xC0,0xC0,0xF0,0x3C,0x0F,0x03,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0x00,0x00," ,
+        "Z":"0x00,0x03,0x03,0x03,0x03,0xC3,0xE3,0x33,0x1F,0x0F,0x03,0x00,0x00,0x30,0x3C,0x3E,0x33,0x31,0x30,0x30,0x30,0x30,0x30,0x00," ,
+        "Z":"0x00,0x03,0x03,0x03,0x03,0xC3,0xE3,0x33,0x1F,0x0F,0x03,0x00,0x00,0x30,0x3C,0x3E,0x33,0x31,0x30,0x30,0x30,0x30,0x30,0x00," ,
+        "[":"0x00,0x00,0x00,0xFF,0xFF,0x03,0x03,0x03,0x03,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x30,0x30,0x30,0x30,0x00,0x00,0x00," ,
+        "\\":"0x00,0x0E,0x1C,0x38,0x70,0xE0,0xC0,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x03,0x07,0x0E,0x1C,0x18,",  
+        "\\":"0x00,0x0E,0x1C,0x38,0x70,0xE0,0xC0,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x03,0x07,0x0E,0x1C,0x18,",  
+        "]":"0x00,0x00,0x00,0x03,0x03,0x03,0x03,0xFF,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x30,0x30,0x3F,0x3F,0x00,0x00,0x00," ,
+        "^":"0x00,0x60,0x70,0x38,0x1C,0x0E,0x07,0x0E,0x1C,0x38,0x70,0x60,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00," ,
+        "_":"0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xC0,0xC0,0xC0,0xC0,0xC0,0xC0,0xC0,0xC0,0xC0,0xC0,0xC0," ,
+        "`":"0x00,0x00,0x00,0x00,0x00,0x3E,0x7E,0x4E,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00," ,
+        "a":"0x00,0x00,0x40,0x60,0x60,0x60,0x60,0x60,0x60,0xE0,0xC0,0x00,0x00,0x1C,0x3E,0x33,0x33,0x33,0x33,0x33,0x33,0x3F,0x3F,0x00," ,
+        "b":"0x00,0xFF,0xFF,0xC0,0x60,0x60,0x60,0x60,0xE0,0xC0,0x80,0x00,0x00,0x3F,0x3F,0x30,0x30,0x30,0x30,0x30,0x38,0x1F,0x0F,0x00," ,
+        "c":"0x00,0x80,0xC0,0xE0,0x60,0x60,0x60,0x60,0x60,0xC0,0x80,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x30,0x18,0x08,0x00," ,
+        "d":"0x00,0x80,0xC0,0xE0,0x60,0x60,0x60,0xE0,0xC0,0xFF,0xFF,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x30,0x3F,0x3F,0x00," ,
+        "e":"0x00,0x80,0xC0,0xE0,0x60,0x60,0x60,0x60,0x60,0xC0,0x80,0x00,0x00,0x0F,0x1F,0x3B,0x33,0x33,0x33,0x33,0x33,0x13,0x01,0x00," ,
+        "f":"0x00,0xC0,0xC0,0xFC,0xFE,0xC7,0xC3,0xC3,0x03,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0x00,0x00,0x00,0x00," ,
+        "g":"0x00,0x80,0xC0,0xE0,0x60,0x60,0x60,0x60,0x60,0xE0,0xE0,0x00,0x00,0x03,0xC7,0xCE,0xCC,0xCC,0xCC,0xCC,0xE6,0x7F,0x3F,0x00," ,
+        "h":"0x00,0xFF,0xFF,0xC0,0x60,0x60,0x60,0xE0,0xC0,0x80,0x00,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x00,0x00," ,
+        "i":"0x00,0x00,0x00,0x00,0x60,0xEC,0xEC,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x3F,0x3F,0x30,0x30,0x00,0x00,0x00," ,
+        "j":"0x00,0x00,0x00,0x00,0x00,0x00,0x60,0xEC,0xEC,0x00,0x00,0x00,0x00,0x00,0x00,0x60,0xE0,0xC0,0xC0,0xFF,0x7F,0x00,0x00,0x00," ,
+        "k":"0x00,0x00,0xFF,0xFF,0x00,0x80,0xC0,0xE0,0x60,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x03,0x07,0x0F,0x1C,0x38,0x30,0x00,0x00," ,
+        "l":"0x00,0x00,0x00,0x00,0x03,0xFF,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x3F,0x3F,0x30,0x30,0x00,0x00,0x00," ,
+        "m":"0x00,0xE0,0xC0,0xE0,0xE0,0xC0,0xC0,0xE0,0xE0,0xC0,0x80,0x00,0x00,0x3F,0x3F,0x00,0x00,0x3F,0x3F,0x00,0x00,0x3F,0x3F,0x00," ,
+        "n":"0x00,0x00,0xE0,0xE0,0x60,0x60,0x60,0x60,0xE0,0xC0,0x80,0x00,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x00," ,
+        "o":"0x00,0x80,0xC0,0xE0,0x60,0x60,0x60,0x60,0xE0,0xC0,0x80,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x38,0x1F,0x0F,0x00," ,
+        "p":"0x00,0xE0,0xE0,0x60,0x60,0x60,0x60,0x60,0xE0,0xC0,0x80,0x00,0x00,0xFF,0xFF,0x0C,0x18,0x18,0x18,0x18,0x1C,0x0F,0x07,0x00," ,
+        "q":"0x00,0x80,0xC0,0xE0,0x60,0x60,0x60,0x60,0x60,0xE0,0xE0,0x00,0x00,0x07,0x0F,0x1C,0x18,0x18,0x18,0x18,0x0C,0xFF,0xFF,0x00," ,
+        "r":"0x00,0x00,0xE0,0xE0,0xC0,0x60,0x60,0x60,0x60,0xE0,0xC0,0x00,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00," ,
+        "s":"0x00,0xC0,0xE0,0x60,0x60,0x60,0x60,0x60,0x40,0x00,0x00,0x00,0x00,0x11,0x33,0x33,0x33,0x33,0x33,0x3F,0x1E,0x00,0x00,0x00," ,
+        "t":"0x00,0x60,0x60,0xFE,0xFE,0x60,0x60,0x60,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x1F,0x3F,0x30,0x30,0x30,0x30,0x00,0x00,0x00," ,
+        "u":"0x00,0xE0,0xE0,0x00,0x00,0x00,0x00,0x00,0x00,0xE0,0xE0,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x18,0x3F,0x3F,0x00," ,
+        "v":"0x00,0x60,0xE0,0x80,0x00,0x00,0x00,0x00,0x80,0xE0,0x60,0x00,0x00,0x00,0x01,0x07,0x1E,0x38,0x38,0x1E,0x07,0x01,0x00,0x00," ,
+        "w":"0x00,0xE0,0xE0,0x00,0x00,0xE0,0xE0,0x00,0x00,0xE0,0xE0,0x00,0x00,0x07,0x1F,0x38,0x1C,0x0F,0x0F,0x1C,0x38,0x1F,0x07,0x00," ,
+        "x":"0x00,0x60,0xE0,0xC0,0x80,0x00,0x80,0xC0,0xE0,0x60,0x00,0x00,0x00,0x30,0x38,0x1D,0x0F,0x07,0x0F,0x1D,0x38,0x30,0x00,0x00," ,
+        "y":"0x00,0x00,0x60,0xE0,0x80,0x00,0x00,0x80,0xE0,0x60,0x00,0x00,0x00,0x00,0x00,0x81,0xE7,0x7E,0x1E,0x07,0x01,0x00,0x00,0x00," ,
+        "z":"0x00,0x60,0x60,0x60,0x60,0x60,0xE0,0xE0,0x60,0x20,0x00,0x00,0x00,0x30,0x38,0x3C,0x36,0x33,0x31,0x30,0x30,0x30,0x00,0x00," ,
+        "z":"0x00,0x60,0x60,0x60,0x60,0x60,0xE0,0xE0,0x60,0x20,0x00,0x00,0x00,0x30,0x38,0x3C,0x36,0x33,0x31,0x30,0x30,0x30,0x00,0x00," ,
+        "{":"0x00,0x00,0x80,0xC0,0xFC,0x7E,0x07,0x03,0x03,0x03,0x00,0x00,0x00,0x00,0x00,0x01,0x1F,0x3F,0x70,0x60,0x60,0x60,0x00,0x00," ,
+        "|":"0x00,0x00,0x00,0x00,0x00,0xFF,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0x00,0x00," ,
+        "}":"0x00,0x00,0x03,0x03,0x03,0x07,0x7E,0xFC,0xC0,0x80,0x00,0x00,0x00,0x00,0x60,0x60,0x60,0x70,0x3F,0x1F,0x01,0x00,0x00,0x00," ,
+        "~":"0x00,0x10,0x18,0x0C,0x04,0x0C,0x18,0x10,0x18,0x0C,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00," ,
+        "¡":"0x00,0x00,0x00,0x00,0x80,0xF3,0xF3,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0F,0x3F,0x3F,0x0F,0x00,0x00,0x00,0x00," ,
+        "¢":"0x00,0x00,0xE0,0xF0,0x38,0xFE,0xFE,0x18,0x38,0x30,0x00,0x00,0x00,0x00,0x03,0x07,0x0E,0x3F,0x3F,0x0C,0x0E,0x06,0x00,0x00," ,
+        "£":"0x00,0x00,0x00,0x80,0xF8,0xFC,0x8C,0x8C,0x1C,0x18,0x00,0x00,0x00,0x00,0x18,0x1C,0x1F,0x0B,0x18,0x18,0x18,0x18,0x08,0x00," ,
+        "¤":"0x00,0xF6,0xFE,0x18,0x0C,0x0C,0x0C,0x0C,0x18,0xFE,0xF6,0x00,0x00,0x1B,0x1F,0x06,0x0C,0x0C,0x0C,0x0C,0x06,0x1F,0x1B,0x00," ,
+        "¥":"0x00,0x03,0x0F,0x3C,0xF0,0xC0,0xC0,0xF0,0x3C,0x0F,0x03,0x00,0x00,0x00,0x0A,0x0A,0x0A,0x3F,0x3F,0x0A,0x0A,0x0A,0x00,0x00," ,
+        "¦":"0x00,0x00,0x00,0x00,0x00,0x1F,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0x00,0x00," ,
+        "§":"0x00,0x00,0xDC,0xFE,0x22,0x22,0x22,0x22,0xE6,0xC4,0x00,0x00,0x00,0x00,0x08,0x19,0x11,0x11,0x11,0x11,0x1F,0x0E,0x00,0x00," ,
+        "¨":"0x00,0x00,0x00,0x03,0x03,0x00,0x00,0x03,0x03,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00," ,
+        "©":"0x00,0xF0,0xF8,0x1C,0xCC,0xEC,0x2C,0x6C,0x4C,0x1C,0xF8,0xF0,0x00,0x07,0x0F,0x1C,0x19,0x1B,0x1A,0x1B,0x19,0x1C,0x0F,0x07," ,
+        "«":"0x00,0x80,0xC0,0x60,0x20,0x00,0x80,0xC0,0x60,0x20,0x00,0x00,0x00,0x00,0x01,0x03,0x02,0x00,0x00,0x01,0x03,0x02,0x00,0x00," ,
+        "¬":"0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0xF8,0xF8,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x03,0x03,0x00," ,
+        "®":"0x00,0xF0,0xF8,0x1C,0xEC,0xEC,0xAC,0xEC,0x4C,0x1C,0xF8,0xF0,0x00,0x07,0x0F,0x1C,0x1B,0x1B,0x18,0x1B,0x1B,0x1C,0x0F,0x07," ,
+        "¯":"0x00,0x00,0x00,0x00,0x00,0x0C,0x0C,0x0C,0x0C,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00," ,
+        "°":"0x00,0x00,0x00,0x1E,0x3F,0x33,0x33,0x3F,0x1E,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00," ,
+        "±":"0x00,0x00,0x00,0xC0,0xC0,0xF0,0xF0,0xC0,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x18,0x18,0x1B,0x1B,0x18,0x18,0x00,0x00,0x00," ,
+        "²":"0x00,0x00,0x19,0x1D,0x15,0x17,0x12,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00," ,
+        "³":"0x00,0x00,0x11,0x15,0x15,0x1F,0x0A,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00," ,
+        "´":"0x00,0x00,0x00,0x00,0x04,0x06,0x03,0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00," ,
+        "µ":"0x00,0xF0,0xF0,0x00,0x00,0x00,0x00,0x00,0xF0,0xF0,0x00,0x00,0x00,0xFF,0xFF,0x0E,0x0C,0x0C,0x0C,0x06,0x0F,0x0F,0x00,0x00," ,
+        "¶":"0x00,0x38,0x7C,0xC6,0x82,0xFE,0xFE,0x02,0xFE,0xFE,0x02,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x00,0x3F,0x3F,0x00,0x00," ,
+        "¹":"0x00,0x00,0x12,0x1F,0x1F,0x10,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00," ,
+        "»":"0x00,0x20,0x60,0xC0,0x80,0x00,0x20,0x60,0xC0,0x80,0x00,0x00,0x00,0x02,0x03,0x01,0x00,0x00,0x02,0x03,0x01,0x00,0x00,0x00," ,
+        "¼":"0x00,0x48,0x7C,0x7C,0x40,0x80,0xC0,0x60,0x30,0x10,0x00,0x00,0x00,0x00,0x04,0x06,0x03,0x01,0x06,0x07,0x04,0x1F,0x1F,0x00," ,
+        "½":"0x00,0x48,0x7C,0x7C,0x40,0x80,0xC0,0x60,0x30,0x10,0x00,0x00,0x00,0x00,0x04,0x06,0x03,0x01,0x00,0x19,0x1D,0x17,0x12,0x00," ,
+        "¾":"0x00,0x44,0x54,0x7C,0x28,0x80,0xC0,0x60,0x30,0x10,0x00,0x00,0x00,0x00,0x04,0x06,0x03,0x01,0x06,0x07,0x04,0x1F,0x1F,0x00," ,
+        "¿":"0x00,0x00,0x00,0x80,0xC0,0xFB,0x7B,0x00,0x00,0x00,0x00,0x00,0x00,0x0E,0x1F,0x3B,0x31,0x30,0x30,0x30,0x38,0x1E,0x0E,0x00," ,
+        "À":"0x00,0x00,0x00,0x80,0xE1,0x7B,0x7E,0xE4,0x80,0x00,0x00,0x00,0x00,0x38,0x3E,0x0F,0x0D,0x0C,0x0C,0x0D,0x0F,0x3E,0x38,0x00," ,
+        "Á":"0x00,0x00,0x00,0x80,0xE4,0x7E,0x7B,0xE1,0x80,0x00,0x00,0x00,0x00,0x38,0x3E,0x0F,0x0D,0x0C,0x0C,0x0D,0x0F,0x3E,0x38,0x00," ,
+        "Â":"0x00,0x00,0x00,0x84,0xE6,0x7B,0x7B,0xE6,0x84,0x00,0x00,0x00,0x00,0x38,0x3E,0x0F,0x0D,0x0C,0x0C,0x0D,0x0F,0x3E,0x38,0x00," ,
+        "Ã":"0x00,0x00,0x00,0x82,0xE3,0x79,0x7B,0xE2,0x83,0x01,0x00,0x00,0x00,0x38,0x3E,0x0F,0x0D,0x0C,0x0C,0x0D,0x0F,0x3E,0x38,0x00," ,
+        "Ä":"0x00,0x00,0x00,0x83,0xE3,0x78,0x78,0xE3,0x83,0x00,0x00,0x00,0x00,0x38,0x3E,0x0F,0x0D,0x0C,0x0C,0x0D,0x0F,0x3E,0x38,0x00," ,
+        "Å":"0x00,0x00,0x00,0x80,0xE2,0x75,0x75,0xE2,0x80,0x00,0x00,0x00,0x00,0x38,0x3E,0x0F,0x0D,0x0C,0x0C,0x0D,0x0F,0x3E,0x38,0x00," ,
+        "Æ":"0x00,0x00,0x80,0xF0,0x7C,0x1F,0xFF,0xFF,0xC3,0xC3,0x03,0x00,0x00,0x3C,0x3F,0x07,0x06,0x06,0x3F,0x3F,0x30,0x30,0x30,0x00," ,
+        "Ç":"0x00,0xF0,0xFC,0x0E,0x07,0x03,0x03,0x03,0x07,0x1E,0x1C,0x00,0x00,0x01,0x07,0xCE,0xDC,0xF8,0xF8,0x18,0x1C,0x0E,0x06,0x00," ,
+        "È":"0x00,0xF8,0xF8,0x99,0x9B,0x9E,0x9C,0x98,0x98,0x18,0x18,0x00,0x00,0x3F,0x3F,0x31,0x31,0x31,0x31,0x31,0x31,0x30,0x30,0x00," ,
+        "É":"0x00,0xF8,0xF8,0x98,0x98,0x9C,0x9E,0x9B,0x99,0x18,0x18,0x00,0x00,0x3F,0x3F,0x31,0x31,0x31,0x31,0x31,0x31,0x30,0x30,0x00," ,
+        "Ê":"0x00,0xF8,0xF8,0x9C,0x9E,0x9B,0x9B,0x9E,0x9C,0x18,0x18,0x00,0x00,0x3F,0x3F,0x31,0x31,0x31,0x31,0x31,0x31,0x30,0x30,0x00," ,
+        "Ë":"0x00,0xF8,0xF8,0x9B,0x9B,0x98,0x98,0x9B,0x9B,0x18,0x18,0x00,0x00,0x3F,0x3F,0x31,0x31,0x31,0x31,0x31,0x31,0x30,0x30,0x00," ,
+        "Ì":"0x00,0x00,0x00,0x19,0x1B,0xFE,0xFC,0x18,0x18,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x3F,0x3F,0x30,0x30,0x00,0x00,0x00," ,
+        "Í":"0x00,0x00,0x00,0x18,0x18,0xFC,0xFE,0x1B,0x19,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x3F,0x3F,0x30,0x30,0x00,0x00,0x00," ,
+        "Î":"0x00,0x00,0x00,0x1C,0x1E,0xFB,0xFB,0x1E,0x1C,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x3F,0x3F,0x30,0x30,0x00,0x00,0x00," ,
+        "Ï":"0x00,0x00,0x00,0x1B,0x1B,0xF8,0xF8,0x1B,0x1B,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x3F,0x3F,0x30,0x30,0x00,0x00,0x00," ,
+        "Ð":"0x00,0xC0,0xFF,0xFF,0xC3,0x03,0x03,0x07,0x0E,0xFC,0xF0,0x00,0x00,0x00,0x3F,0x3F,0x30,0x30,0x30,0x38,0x1C,0x0F,0x03,0x00," ,
+        "Ñ":"0x00,0xF8,0xF8,0x72,0xE3,0xC1,0x83,0x02,0x03,0xF9,0xF8,0x00,0x00,0x3F,0x3F,0x00,0x00,0x01,0x03,0x07,0x0E,0x3F,0x3F,0x00," ,
+        "Ò":"0x00,0xE0,0xF0,0x39,0x1B,0x1E,0x1C,0x18,0x38,0xF0,0xE0,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x38,0x1F,0x0F,0x00," ,
+        "Ó":"0x00,0xE0,0xF0,0x38,0x18,0x1C,0x1E,0x1B,0x39,0xF0,0xE0,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x38,0x1F,0x0F,0x00," ,
+        "Ô":"0x00,0xE0,0xF0,0x3C,0x1E,0x1B,0x1B,0x1E,0x3C,0xF0,0xE0,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x38,0x1F,0x0F,0x00," ,
+        "Õ":"0x00,0xE0,0xF0,0x3A,0x1B,0x19,0x1B,0x1A,0x3B,0xF1,0xE0,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x38,0x1F,0x0F,0x00," ,
+        "Ö":"0x00,0xE0,0xF0,0x3B,0x1B,0x18,0x18,0x1B,0x3B,0xF0,0xE0,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x38,0x1F,0x0F,0x00," ,
+        "×":"0x00,0xF0,0xF8,0x1C,0x0C,0x8C,0xEC,0x7C,0x18,0xFC,0xF4,0x00,0x00,0x2F,0x3F,0x18,0x3E,0x37,0x31,0x30,0x38,0x1F,0x0F,0x00," ,
+        "Ù":"0x00,0xF8,0xF8,0x01,0x03,0x06,0x04,0x00,0x00,0xF8,0xF8,0x00,0x00,0x07,0x1F,0x38,0x30,0x30,0x30,0x30,0x38,0x1F,0x07,0x00," ,
+        "Ú":"0x00,0xF8,0xF8,0x00,0x00,0x04,0x06,0x03,0x01,0xF8,0xF8,0x00,0x00,0x07,0x1F,0x38,0x30,0x30,0x30,0x30,0x38,0x1F,0x07,0x00," ,
+        "Û":"0x00,0xF8,0xF8,0x04,0x06,0x03,0x03,0x06,0x04,0xF8,0xF8,0x00,0x00,0x07,0x1F,0x38,0x30,0x30,0x30,0x30,0x38,0x1F,0x07,0x00," ,
+        "Ü":"0x00,0xF8,0xF8,0x03,0x03,0x00,0x00,0x03,0x03,0xF8,0xF8,0x00,0x00,0x07,0x1F,0x38,0x30,0x30,0x30,0x30,0x38,0x1F,0x07,0x00," ,
+        "Ý":"0x00,0x08,0x18,0x30,0x60,0xC4,0xC6,0x63,0x31,0x18,0x08,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0x00,0x00," ,
+        "ß":"0x00,0x00,0xC0,0xE0,0x30,0x10,0x10,0x30,0xE0,0xC0,0x00,0x00,0x00,0x00,0xFF,0xFF,0x21,0x21,0x21,0x33,0x3F,0x1E,0x00,0x00," ,
+        "à":"0x00,0x00,0x40,0x60,0x62,0x66,0x6C,0x68,0x60,0xE0,0xC0,0x00,0x00,0x1C,0x3E,0x33,0x33,0x33,0x33,0x33,0x33,0x3F,0x3F,0x00," ,
+        "á":"0x00,0x00,0x40,0x60,0x68,0x6C,0x66,0x62,0x60,0xE0,0xC0,0x00,0x00,0x1C,0x3E,0x33,0x33,0x33,0x33,0x33,0x33,0x3F,0x3F,0x00," ,
+        "â":"0x00,0x00,0x40,0x68,0x6C,0x66,0x66,0x6C,0x68,0xE0,0xC0,0x00,0x00,0x1C,0x3E,0x33,0x33,0x33,0x33,0x33,0x33,0x3F,0x3F,0x00," ,
+        "ã":"0x00,0x00,0x40,0x68,0x6C,0x64,0x6C,0x68,0x6C,0xE4,0xC0,0x00,0x00,0x1C,0x3E,0x33,0x33,0x33,0x33,0x33,0x33,0x3F,0x3F,0x00," ,
+        "ä":"0x00,0x00,0x40,0x6C,0x6C,0x60,0x60,0x6C,0x6C,0xE0,0xC0,0x00,0x00,0x1C,0x3E,0x33,0x33,0x33,0x33,0x33,0x33,0x3F,0x3F,0x00," ,
+        "å":"0x00,0x00,0x40,0x60,0x64,0x6A,0x6A,0x64,0x60,0xE0,0xC0,0x00,0x00,0x1C,0x3E,0x33,0x33,0x33,0x33,0x33,0x33,0x3F,0x3F,0x00," ,
+        "æ":"0x00,0x80,0xC0,0x40,0x40,0xC0,0x80,0x40,0x40,0xC0,0x80,0x00,0x00,0x1C,0x3E,0x22,0x22,0x1F,0x3F,0x22,0x22,0x33,0x11,0x00," ,
+        "ç":"0x00,0x80,0xC0,0xE0,0x60,0x60,0x60,0x60,0xE0,0xC0,0x80,0x00,0x00,0x0F,0x1F,0xB8,0xB0,0xF0,0xF0,0x30,0x38,0x18,0x08,0x00," ,
+        "è":"0x00,0x80,0xC0,0xE0,0x62,0x66,0x6C,0x68,0x60,0xC0,0x80,0x00,0x00,0x0F,0x1F,0x33,0x33,0x33,0x33,0x33,0x33,0x13,0x03,0x00," ,
+        "é":"0x00,0x80,0xC0,0xE0,0x60,0x68,0x6C,0x66,0x62,0xC0,0x80,0x00,0x00,0x0F,0x1F,0x3B,0x33,0x33,0x33,0x33,0x33,0x13,0x03,0x00," ,
+        "ê":"0x00,0x80,0xC0,0xE8,0x6C,0x66,0x66,0x6C,0x68,0xC0,0x80,0x00,0x00,0x0F,0x1F,0x33,0x33,0x33,0x33,0x33,0x33,0x13,0x03,0x00," ,
+        "ë":"0x00,0x80,0xC0,0xEC,0x6C,0x60,0x60,0x6C,0x6C,0xC0,0x80,0x00,0x00,0x0F,0x1F,0x33,0x33,0x33,0x33,0x33,0x33,0x13,0x03,0x00," ,
+        "ì":"0x00,0x00,0x00,0x00,0x62,0xE6,0xEC,0x08,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x3F,0x3F,0x30,0x30,0x00,0x00,0x00," ,
+        "í":"0x00,0x00,0x00,0x00,0x68,0xEC,0xE6,0x02,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x3F,0x3F,0x30,0x30,0x00,0x00,0x00," ,
+        "î":"0x00,0x00,0x00,0x08,0x6C,0xE6,0xE6,0x0C,0x08,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x3F,0x3F,0x30,0x30,0x00,0x00,0x00," ,
+        "ï":"0x00,0x00,0x00,0x0C,0x6C,0xE0,0xEC,0x0C,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x3F,0x3F,0x30,0x30,0x00,0x00,0x00," ,
+        "ñ":"0x00,0x00,0xE0,0xE8,0x6C,0x64,0x6C,0x68,0xEC,0xC4,0x80,0x00,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x00," ,
+        "ò":"0x00,0x80,0xC0,0xE0,0x62,0x66,0x6C,0x68,0xE0,0xC0,0x80,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x38,0x1F,0x0F,0x00," ,
+        "ó":"0x00,0x80,0xC0,0xE0,0x68,0x6C,0x66,0x62,0xE0,0xC0,0x80,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x38,0x1F,0x0F,0x00," ,
+        "ô":"0x00,0x80,0xC0,0xE8,0x6C,0x66,0x66,0x6C,0xE8,0xC0,0x80,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x38,0x1F,0x0F,0x00," ,
+        "õ":"0x00,0x80,0xC8,0xEC,0x64,0x6C,0x68,0x6C,0xE4,0xC0,0x80,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x38,0x1F,0x0F,0x00," ,
+        "ö":"0x00,0x80,0xC0,0xEC,0x6C,0x60,0x60,0x6C,0xEC,0xC0,0x80,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x38,0x1F,0x0F,0x00," ,
+        "÷":"0x00,0x00,0x80,0x80,0x80,0xB0,0xB0,0x80,0x80,0x80,0x00,0x00,0x00,0x00,0x01,0x01,0x01,0x0D,0x0D,0x01,0x01,0x01,0x00,0x00," ,
+        "ø":"0x00,0x80,0xC0,0xE0,0x60,0x60,0x60,0xE0,0xC0,0xE0,0xA0,0x00,0x00,0x2F,0x3F,0x18,0x3C,0x36,0x33,0x31,0x38,0x1F,0x0F,0x00," ,
+        "ù":"0x00,0xE0,0xE0,0x00,0x02,0x06,0x0C,0x08,0x00,0xE0,0xE0,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x18,0x3F,0x3F,0x00," ,
+        "ú":"0x00,0xE0,0xE0,0x00,0x08,0x0C,0x06,0x02,0x00,0xE0,0xE0,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x18,0x3F,0x3F,0x00," ,
+        "û":"0x00,0xE0,0xE0,0x08,0x0C,0x06,0x06,0x0C,0x08,0xE0,0xE0,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x18,0x3F,0x3F,0x00," ,
+        "ü":"0x00,0xE0,0xE0,0x0C,0x0C,0x00,0x00,0x0C,0x0C,0xE0,0xE0,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x18,0x3F,0x3F,0x00," ,
+        "ý":"0x00,0x00,0x60,0xE0,0x80,0x10,0x18,0x8C,0xE4,0x60,0x00,0x00,0x00,0x00,0x00,0x81,0xE7,0x7E,0x1E,0x07,0x01,0x00,0x00,0x00," ,
+        "þ":"0x00,0x00,0x03,0xFF,0xFF,0x1B,0x18,0x18,0xF8,0xF0,0x00,0x00,0x00,0x00,0x30,0x3F,0x3F,0x36,0x06,0x06,0x07,0x03,0x00,0x00," ,
+        "ÿ":"0x00,0x00,0x60,0xEC,0x8C,0x00,0x00,0x8C,0xEC,0x60,0x00,0x00,0x00,0x00,0x00,0x81,0xE7,0x7E,0x1E,0x07,0x01,0x00,0x00,0x00," ,
+        "Ѐ":"0x00,0xFC,0xFC,0x8D,0x8F,0x8E,0x8C,0x8C,0x8C,0x0C,0x0C,0x00,0x00,0x3F,0x3F,0x31,0x31,0x31,0x31,0x31,0x31,0x30,0x30,0x00," ,
+        "Ё":"0x00,0xFE,0xFE,0xC7,0xC7,0xC6,0xC6,0xC7,0xC7,0x06,0x06,0x00,0x00,0x3F,0x3F,0x30,0x30,0x30,0x30,0x30,0x30,0x30,0x30,0x00," ,
+        "Ђ":"0x00,0x03,0xFF,0xFF,0x83,0xC3,0xC3,0xC3,0xC0,0x80,0x00,0x00,0x00,0x00,0x3F,0x3F,0x01,0x00,0x30,0x30,0x39,0x1F,0x0F,0x00," ,
+        "Ѓ":"0x00,0xFC,0xFC,0x0C,0x0C,0x0C,0x0E,0x0F,0x0D,0x0C,0x0C,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00," ,
+        "Є":"0x00,0xF8,0xFC,0xCE,0xC7,0xC3,0xC3,0xC3,0x07,0x0E,0x0C,0x00,0x00,0x07,0x0F,0x1C,0x38,0x30,0x30,0x30,0x38,0x1C,0x0C,0x00," ,
+        "Ѕ":"0x00,0x3C,0x7E,0x67,0xE3,0xC3,0xC3,0xC3,0x87,0x8E,0x0C,0x00,0x00,0x0C,0x1C,0x38,0x30,0x30,0x30,0x31,0x39,0x1F,0x0F,0x00," ,
+        "І":"0x00,0x00,0x00,0x03,0x03,0xFF,0xFF,0x03,0x03,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x3F,0x3F,0x30,0x30,0x00,0x00,0x00," ,
+        "Ї":"0x00,0x00,0x00,0x0D,0x0D,0xFC,0xFC,0x0D,0x0D,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x3F,0x3F,0x30,0x30,0x00,0x00,0x00," ,
+        "Ј":"0x00,0x00,0x00,0x00,0x00,0x00,0x03,0x03,0x03,0xFF,0xFF,0x00,0x00,0x0E,0x1E,0x38,0x30,0x30,0x30,0x30,0x38,0x1F,0x0F,0x00," ,
+        "Љ":"0x00,0x00,0xFE,0xFF,0x03,0x03,0xFF,0xFF,0xC0,0xC0,0x80,0x00,0x00,0x30,0x3F,0x1F,0x00,0x00,0x3F,0x3F,0x30,0x39,0x1F,0x0F," ,
+        "Њ":"0x00,0xFF,0xFF,0xC0,0xC0,0xC0,0xFF,0xFF,0xC0,0xC0,0x80,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0x3F,0x3F,0x30,0x39,0x1F,0x0F," ,
+        "Ћ":"0x00,0x03,0xFF,0xFF,0xC3,0xC3,0xC3,0xC3,0xC0,0x80,0x00,0x00,0x00,0x00,0x3F,0x3F,0x01,0x00,0x00,0x00,0x01,0x3F,0x3F,0x00," ,
+        "Ќ":"0x00,0xFF,0xFF,0xC0,0xE2,0xF3,0x39,0x1C,0x0E,0x07,0x03,0x00,0x00,0x3F,0x3F,0x00,0x01,0x03,0x07,0x0E,0x1C,0x38,0x30,0x00," ,
+        "Ѝ":"0x00,0xFF,0xFF,0x00,0x01,0xC3,0xF2,0x38,0x0E,0xFF,0xFF,0x00,0x00,0x3F,0x3F,0x1C,0x07,0x03,0x00,0x00,0x00,0x3F,0x3F,0x00," ,
+        "Ў":"0x00,0x07,0x1F,0x7C,0xF1,0xC1,0xC1,0xF1,0x7C,0x1F,0x07,0x00,0x00,0x00,0x30,0x30,0x3C,0x0F,0x07,0x01,0x00,0x00,0x00,0x00," ,
+        "Џ":"0x00,0xFF,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0xFF,0x00,0x00,0x1F,0x1F,0x18,0x18,0x78,0x78,0x18,0x18,0x1F,0x1F,0x00," ,
+        #"A":"0x00,0x80,0xE0,0x78,0x1E,0x07,0x07,0x1E,0x78,0xE0,0x80,0x00,0x00,0x3F,0x3F,0x06,0x06,0x06,0x06,0x06,0x06,0x3F,0x3F,0x00," ,
+        "Б":"0x00,0xFF,0xFF,0xC3,0xC3,0xC3,0xC3,0xC3,0xC3,0x83,0x00,0x00,0x00,0x3F,0x3F,0x30,0x30,0x30,0x30,0x30,0x39,0x1F,0x0F,0x00," ,
+        "В":"0x00,0xFF,0xFF,0xC3,0xC3,0xC3,0xC3,0xE7,0xFE,0xBC,0x00,0x00,0x00,0x3F,0x3F,0x30,0x30,0x30,0x30,0x30,0x39,0x1F,0x0F,0x00," ,
+        "Г":"0x00,0xFF,0xFF,0x03,0x03,0x03,0x03,0x03,0x03,0x03,0x03,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00," ,
+        "Г":"0x00,0xFF,0xFF,0x03,0x03,0x03,0x03,0x03,0x03,0x03,0x03,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00," ,
+        "Д":"0x00,0x00,0xF8,0xFE,0x0F,0x03,0x03,0x03,0xFF,0xFF,0x00,0x00,0x00,0x70,0x7F,0x1F,0x18,0x18,0x18,0x18,0x1F,0x7F,0x70,0x00," ,
+        "Е":"0x00,0xFF,0xFF,0xC3,0xC3,0xC3,0xC3,0xC3,0xC3,0x03,0x03,0x00,0x00,0x3F,0x3F,0x30,0x30,0x30,0x30,0x30,0x30,0x30,0x30,0x00," ,
+        "Ж":"0x00,0x03,0x0F,0xFC,0xE0,0xFF,0xFF,0xE0,0xFC,0x0F,0x03,0x00,0x00,0x38,0x3F,0x07,0x00,0x3F,0x3F,0x00,0x07,0x3F,0x38,0x00," ,
+        "Ж":"0x00,0x03,0x0F,0xFC,0xE0,0xFF,0xFF,0xE0,0xFC,0x0F,0x03,0x00,0x00,0x38,0x3F,0x07,0x00,0x3F,0x3F,0x00,0x07,0x3F,0x38,0x00," ,
+        "И":"0x00,0xFF,0xFF,0x00,0x00,0xC0,0xF0,0x38,0x0E,0xFF,0xFF,0x00,0x00,0x3F,0x3F,0x1C,0x07,0x03,0x00,0x00,0x00,0x3F,0x3F,0x00," ,
+        "Й":"0x00,0xFF,0xFF,0x00,0x02,0xC3,0xF1,0x38,0x0E,0xFF,0xFF,0x00,0x00,0x3F,0x3F,0x1C,0x07,0x03,0x00,0x00,0x00,0x3F,0x3F,0x00," ,
+        "К":"0x00,0xFF,0xFF,0xC0,0xE0,0xF0,0x38,0x1C,0x0E,0x07,0x03,0x00,0x00,0x3F,0x3F,0x00,0x01,0x03,0x07,0x0E,0x1C,0x38,0x30,0x00," ,
+        "Л":"0x00,0x00,0xF0,0xFC,0x1E,0x07,0x03,0x03,0x03,0xFF,0xFF,0x00,0x00,0x30,0x3F,0x1F,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x00," ,
+        "М":"0x00,0xFF,0xFF,0x1E,0x78,0xE0,0xE0,0x78,0x1E,0xFF,0xFF,0x00,0x00,0x3F,0x3F,0x00,0x00,0x01,0x01,0x00,0x00,0x3F,0x3F,0x00," ,
+        "Н":"0x00,0xFF,0xFF,0xC0,0xC0,0xC0,0xC0,0xC0,0xC0,0xFF,0xFF,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x00," ,
+        "О":"0x00,0xF0,0xFC,0x0E,0x07,0x03,0x03,0x07,0x0E,0xFC,0xF0,0x00,0x00,0x03,0x0F,0x1C,0x38,0x30,0x30,0x38,0x1C,0x0F,0x03,0x00," ,
+        "П":"0x00,0xFF,0xFF,0x03,0x03,0x03,0x03,0x03,0x03,0xFF,0xFF,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x00," ,
+        "Р":"0x00,0xFF,0xFF,0x83,0x83,0x83,0x83,0x83,0xC7,0xFE,0x7C,0x00,0x00,0x3F,0x3F,0x01,0x01,0x01,0x01,0x01,0x01,0x00,0x00,0x00," ,
+        "С":"0x00,0xF0,0xFC,0x0E,0x07,0x03,0x03,0x03,0x07,0x0E,0x0C,0x00,0x00,0x03,0x0F,0x1C,0x38,0x30,0x30,0x30,0x38,0x1C,0x0C,0x00," ,
+        "Т":"0x00,0x03,0x03,0x03,0x03,0xFF,0xFF,0x03,0x03,0x03,0x03,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0x00,0x00," ,
+        "У":"0x00,0x07,0x1F,0x7C,0xF0,0xC0,0xC0,0xF0,0x7C,0x1F,0x07,0x00,0x00,0x00,0x30,0x30,0x3C,0x0F,0x07,0x01,0x00,0x00,0x00,0x00," ,
+        "Ф":"0x00,0xF8,0xFC,0x0E,0x06,0xFF,0xFF,0x06,0x0E,0xFC,0xF8,0x00,0x00,0x03,0x07,0x0E,0x0C,0x3F,0x3F,0x0C,0x0E,0x07,0x03,0x00," ,
+        "Х":"0x00,0x03,0x0F,0x3C,0xF0,0xC0,0xC0,0xF0,0x3C,0x0F,0x03,0x00,0x00,0x30,0x3C,0x0F,0x03,0x00,0x00,0x03,0x0F,0x3C,0x30,0x00," ,
+        "Ц":"0x00,0xFF,0xFF,0x00,0x00,0x00,0x00,0x00,0xFF,0xFF,0x00,0x00,0x00,0x1F,0x1F,0x18,0x18,0x18,0x18,0x18,0x1F,0x7F,0x78,0x00," ,
+        "Ч":"0x00,0x7F,0xFF,0xC0,0xC0,0xC0,0xC0,0xC0,0xC0,0xFF,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x00," ,
+        "Ш":"0x00,0xFF,0xFF,0x00,0x00,0xFF,0xFF,0x00,0x00,0xFF,0xFF,0x00,0x00,0x3F,0x3F,0x30,0x30,0x3F,0x3F,0x30,0x30,0x3F,0x3F,0x00," ,
+        "Щ":"0x00,0xFF,0xFF,0x00,0x00,0xFF,0xFF,0x00,0x00,0xFF,0xFF,0x00,0x00,0x1F,0x1F,0x18,0x18,0x1F,0x1F,0x18,0x18,0x1F,0x7F,0x70," ,
+        "Ъ":"0x03,0x03,0xFF,0xFF,0xC0,0xC0,0xC0,0xC0,0xC0,0x80,0x00,0x00,0x00,0x00,0x3F,0x3F,0x30,0x30,0x30,0x30,0x39,0x1F,0x0F,0x00," ,
+        "Ы":"0x00,0xFF,0xFF,0xC0,0xC0,0xC0,0xC0,0x80,0x00,0x00,0xFF,0xFF,0x00,0x3F,0x3F,0x30,0x30,0x30,0x39,0x1F,0x0F,0x00,0x3F,0x3F," ,
+        "Ь":"0x00,0xFF,0xFF,0xC0,0xC0,0xC0,0xC0,0xC0,0xC0,0x80,0x00,0x00,0x00,0x3F,0x3F,0x30,0x30,0x30,0x30,0x30,0x39,0x1F,0x0F,0x00," ,
+        "Э":"0x00,0x0C,0x0E,0x07,0xC3,0xC3,0xC3,0xC7,0xCE,0xFC,0xF8,0x00,0x00,0x0C,0x1C,0x38,0x30,0x30,0x30,0x38,0x1C,0x0F,0x07,0x00," ,
+        "Ю":"0x00,0xFF,0xFF,0xC0,0xFC,0xFE,0x07,0x03,0x07,0xFE,0xFC,0x00,0x00,0x3F,0x3F,0x00,0x0F,0x1F,0x38,0x30,0x38,0x1F,0x0F,0x00," ,
+        "Я":"0x00,0x7C,0xFE,0xC7,0x83,0x83,0x83,0x83,0x83,0xFF,0xFF,0x00,0x00,0x30,0x38,0x1D,0x0F,0x07,0x03,0x01,0x01,0x3F,0x3F,0x00," ,
+        "а":"0x00,0x00,0x30,0x30,0x30,0x30,0x30,0x30,0x30,0xF0,0xE0,0x00,0x00,0x1E,0x3F,0x33,0x33,0x33,0x33,0x33,0x33,0x3F,0x3F,0x00," ,
+        "б":"0x00,0xE0,0xF0,0x30,0x30,0x30,0x30,0x30,0x30,0x30,0x00,0x00,0x00,0x1F,0x3F,0x33,0x33,0x33,0x33,0x33,0x33,0x3F,0x1E,0x00," ,
+        "в":"0x00,0xF0,0xF0,0x30,0x30,0x30,0x30,0x30,0xF0,0xE0,0x00,0x00,0x00,0x3F,0x3F,0x33,0x33,0x33,0x33,0x33,0x33,0x3F,0x1E,0x00," ,
+        "г":"0x00,0xF0,0xF0,0x30,0x30,0x30,0x30,0x30,0x30,0x30,0x30,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00," ,
+        "д":"0x00,0x00,0xC0,0xE0,0x70,0x30,0x30,0x30,0xF0,0xF0,0x00,0x00,0x00,0x60,0x7F,0x3F,0x30,0x30,0x30,0x30,0x3F,0x7F,0x60,0x00," ,
+        "е":"0x00,0xE0,0xF0,0x30,0x30,0x30,0x30,0x30,0x30,0xF0,0xE0,0x00,0x00,0x1F,0x3F,0x33,0x33,0x33,0x33,0x33,0x33,0x33,0x33,0x00," ,
+        "ж":"0x00,0x30,0xF0,0xC0,0x00,0xF0,0xF0,0x00,0xC0,0xF0,0x30,0x00,0x00,0x30,0x3C,0x0F,0x03,0x3F,0x3F,0x03,0x0F,0x3C,0x30,0x00," ,
+        "з":"0x00,0x60,0x70,0x30,0x30,0x30,0x30,0x30,0x30,0xF0,0xE0,0x00,0x00,0x18,0x38,0x30,0x33,0x33,0x33,0x33,0x33,0x3F,0x1D,0x00," ,
+        "З":"0x00,0x60,0x70,0x30,0x30,0x30,0x30,0x30,0x30,0xF0,0xE0,0x00,0x00,0x18,0x38,0x30,0x33,0x33,0x33,0x33,0x33,0x3F,0x1D,0x00," ,
+        "и":"0x00,0xF0,0xF0,0x00,0x00,0x00,0x80,0xC0,0xE0,0xF0,0xF0,0x00,0x00,0x3F,0x3F,0x1C,0x0E,0x07,0x03,0x01,0x00,0x3F,0x3F,0x00," ,
+        "й":"0x00,0xF0,0xF0,0x00,0x04,0x08,0x88,0xC4,0xE0,0xF0,0xF0,0x00,0x00,0x3F,0x3F,0x1C,0x0E,0x07,0x03,0x01,0x00,0x3F,0x3F,0x00," ,
+        "к":"0x00,0xF0,0xF0,0x80,0x80,0xC0,0xE0,0x70,0x30,0x10,0x00,0x00,0x00,0x3F,0x3F,0x03,0x03,0x07,0x0E,0x1C,0x38,0x30,0x20,0x00," ,
+        "л":"0x00,0x00,0xC0,0xE0,0x70,0x30,0x30,0x30,0x30,0xF0,0xF0,0x00,0x00,0x30,0x3F,0x1F,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x00," ,
+        "м":"0x00,0xF0,0xF0,0xE0,0xC0,0x80,0x80,0xC0,0xE0,0xF0,0xF0,0x00,0x00,0x3F,0x3F,0x00,0x01,0x03,0x03,0x01,0x00,0x3F,0x3F,0x00," ,
+        "н":"0x00,0xF0,0xF0,0x00,0x00,0x00,0x00,0x00,0x00,0xF0,0xF0,0x00,0x00,0x3F,0x3F,0x03,0x03,0x03,0x03,0x03,0x03,0x3F,0x3F,0x00," ,
+        "о":"0x00,0xC0,0xE0,0x70,0x30,0x30,0x30,0x30,0x70,0xE0,0xC0,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x38,0x1F,0x0F,0x00," ,
+        "п":"0x00,0xF0,0xF0,0x30,0x30,0x30,0x30,0x30,0x30,0xF0,0xF0,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x00," ,
+        "р":"0x00,0xF0,0xF0,0x30,0x30,0x30,0x30,0x30,0x70,0xE0,0xC0,0x00,0x00,0xFF,0xFF,0x0C,0x0C,0x0C,0x0C,0x0C,0x0E,0x07,0x03,0x00," ,
+        "с":"0x00,0xC0,0xE0,0x70,0x30,0x30,0x30,0x30,0x70,0x60,0x40,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x38,0x18,0x08,0x00," ,
+        "т":"0x00,0x30,0x30,0x30,0x30,0xF0,0xF0,0x30,0x30,0x30,0x30,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0x00,0x00," ,
+        "у":"0x00,0x30,0xF0,0xC0,0x00,0x00,0x00,0x00,0xC0,0xF0,0x30,0x00,0x00,0x60,0xE0,0xC3,0xE7,0x7C,0x3C,0x0F,0x03,0x00,0x00,0x00," ,
+        "ф":"0x00,0x80,0xC0,0x60,0x60,0xF0,0xF0,0x60,0x60,0xC0,0x80,0x00,0x00,0x0F,0x1F,0x30,0x30,0xFF,0xFF,0x30,0x30,0x1F,0x0F,0x00," ,
+        "х":"0x00,0x30,0x70,0xC0,0x80,0x00,0x00,0x80,0xC0,0x70,0x30,0x00,0x00,0x30,0x38,0x0C,0x07,0x03,0x03,0x07,0x0C,0x38,0x30,0x00," ,
+        "ц":"0x00,0xF0,0xF0,0x00,0x00,0x00,0x00,0x00,0xF0,0xF0,0x00,0x00,0x00,0x3F,0x3F,0x30,0x30,0x30,0x30,0x30,0x3F,0xFF,0xF0,0x00," ,
+        "ч":"0x00,0xF0,0xF0,0x00,0x00,0x00,0x00,0x00,0x00,0xF0,0xF0,0x00,0x00,0x01,0x03,0x03,0x03,0x03,0x03,0x03,0x03,0x3F,0x3F,0x00," ,
+        "ш":"0x00,0xF0,0xF0,0x00,0x00,0xE0,0xE0,0x00,0x00,0xF0,0xF0,0x00,0x00,0x3F,0x3F,0x30,0x30,0x3F,0x3F,0x30,0x30,0x3F,0x3F,0x00," ,
+        "щ":"0x00,0xF0,0xF0,0x00,0x00,0xF0,0xF0,0x00,0x00,0xF0,0xF0,0x00,0x00,0x3F,0x3F,0x30,0x30,0x3F,0x3F,0x30,0x30,0x3F,0xFF,0xE0," ,
+        "ъ":"0x30,0x30,0xF0,0xF0,0x80,0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x31,0x31,0x31,0x31,0x3B,0x1F,0x0E,0x00," ,
+        "ы":"0x00,0xF0,0xF0,0x80,0x80,0x80,0x00,0x00,0x00,0xF0,0xF0,0x00,0x00,0x3F,0x3F,0x31,0x31,0x3B,0x1F,0x0E,0x00,0x3F,0x3F,0x00," ,
+        "ь":"0x00,0xF0,0xF0,0x80,0x80,0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x00,0x3F,0x3F,0x31,0x31,0x31,0x31,0x31,0x3B,0x1F,0x0E,0x00," ,
+        "э":"0x00,0x40,0x60,0x70,0x30,0x30,0x30,0x30,0x70,0xE0,0xC0,0x00,0x00,0x08,0x18,0x38,0x30,0x33,0x33,0x33,0x3B,0x1F,0x0F,0x00," ,
+        "ю":"0x00,0xF0,0xF0,0x00,0xE0,0xF0,0x30,0x30,0x30,0xF0,0xE0,0x00,0x00,0x3F,0x3F,0x03,0x1F,0x3F,0x30,0x30,0x30,0x3F,0x1F,0x00," ,
+        "я":"0x00,0xC0,0xE0,0x70,0x30,0x30,0x30,0x30,0x30,0xF0,0xF0,0x00,0x00,0x21,0x33,0x3B,0x1E,0x0E,0x06,0x06,0x06,0x3F,0x3F,0x00," ,
+        "ѐ":"0x00,0xE0,0xF0,0x32,0x36,0x36,0x34,0x30,0x30,0xF0,0xE0,0x00,0x00,0x1F,0x3F,0x33,0x33,0x33,0x33,0x33,0x33,0x33,0x33,0x00," ,
+        "ё":"0x00,0xE0,0xF0,0x34,0x34,0x30,0x30,0x34,0x34,0xF0,0xE0,0x00,0x00,0x1F,0x3F,0x33,0x33,0x33,0x33,0x33,0x33,0x33,0x33,0x00," ,
+        "ђ":"0x00,0x30,0xFC,0xFC,0x30,0xB0,0xB0,0xB0,0x80,0x80,0x00,0x00,0x00,0x00,0x3F,0x3F,0x07,0x03,0x01,0x01,0xC1,0xFF,0x3F,0x00," ,
+        "ѓ":"0x00,0xF0,0xF0,0x30,0x30,0x34,0x36,0x32,0x30,0x30,0x30,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00," ,
+        "є":"0x00,0xC0,0xE0,0x70,0x30,0x30,0x30,0x30,0x70,0x60,0x40,0x00,0x00,0x0F,0x1F,0x3B,0x33,0x33,0x33,0x30,0x38,0x18,0x08,0x00," ,
+        "ѕ":"0x00,0xE0,0xF0,0xB0,0xB0,0x30,0x30,0x30,0x30,0x70,0x60,0x00,0x00,0x18,0x39,0x31,0x33,0x33,0x33,0x37,0x36,0x3E,0x1C,0x00," ,
+        "і":"0x00,0x00,0x00,0x00,0x30,0xF6,0xF6,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x3F,0x3F,0x30,0x30,0x00,0x00,0x00," ,
+        "ї":"0x00,0x00,0x00,0x04,0x34,0xF0,0xF4,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x3F,0x3F,0x30,0x30,0x00,0x00,0x00," ,
+        "ј":"0x00,0x00,0x00,0x00,0x00,0x30,0x30,0xF6,0xF6,0x00,0x00,0x00,0x00,0x00,0x00,0x60,0xE0,0xC0,0xC0,0xFF,0x7F,0x00,0x00,0x00," ,
+        "љ":"0x00,0x00,0xE0,0xF0,0x30,0x30,0xF0,0xF0,0x00,0x00,0x00,0x00,0x00,0x30,0x3F,0x1F,0x00,0x00,0x3F,0x3F,0x33,0x33,0x1E,0x0C," ,
+        "њ":"0x00,0xF0,0xF0,0x00,0x00,0x00,0xF0,0xF0,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x03,0x03,0x03,0x3F,0x3F,0x33,0x33,0x1E,0x0C," ,
+        "ћ":"0x00,0x30,0xFC,0xFC,0xB0,0xB0,0xB0,0xB0,0x80,0x80,0x00,0x00,0x00,0x00,0x3F,0x3F,0x01,0x01,0x01,0x01,0x01,0x3F,0x3F,0x00," ,
+        "ќ":"0x00,0xF0,0xF0,0x80,0x88,0xCC,0xE4,0x70,0x30,0x10,0x00,0x00,0x00,0x3F,0x3F,0x03,0x03,0x07,0x0E,0x1C,0x38,0x30,0x20,0x00," ,
+        "ѝ":"0x00,0xF0,0xF0,0x00,0x06,0x0C,0x88,0xC0,0xE0,0xF0,0xF0,0x00,0x00,0x3F,0x3F,0x1C,0x0E,0x07,0x03,0x01,0x00,0x3F,0x3F,0x00," ,
+        "ў":"0x00,0x30,0xF0,0xC0,0x04,0x08,0x08,0x04,0xC0,0xF0,0x30,0x00,0x00,0x60,0xE0,0xC3,0xE7,0x7C,0x3C,0x0F,0x03,0x00,0x00,0x00," ,
+        "џ":"0x00,0xF0,0xF0,0x00,0x00,0x00,0x00,0x00,0x00,0xF0,0xF0,0x00,0x00,0x3F,0x3F,0x30,0x30,0xF0,0xF0,0x30,0x30,0x3F,0x3F,0x00," ,
+        "Ā":"0x00,0x00,0x00,0xE0,0xF9,0x1D,0x1D,0xF9,0xE0,0x00,0x00,0x00,0x00,0x38,0x3F,0x07,0x06,0x06,0x06,0x06,0x07,0x3F,0x38,0x00," ,
+        "ā":"0x00,0x00,0x40,0x60,0x68,0x68,0x68,0x68,0x68,0xE0,0xC0,0x00,0x00,0x1C,0x3E,0x33,0x33,0x33,0x33,0x33,0x33,0x3F,0x3F,0x00," ,
+        "Ă":"0x00,0x00,0x00,0xE0,0xF9,0x1A,0x1A,0xF9,0xE0,0x00,0x00,0x00,0x00,0x38,0x3F,0x07,0x06,0x06,0x06,0x06,0x07,0x3F,0x38,0x00," ,
+        "ă":"0x00,0x00,0x40,0x60,0x64,0x68,0x68,0x68,0x64,0xE0,0xC0,0x00,0x00,0x1C,0x3E,0x33,0x33,0x33,0x33,0x33,0x33,0x3F,0x3F,0x00," ,
+        "Ą":"0x00,0x00,0x00,0xE0,0xFC,0x1F,0x1F,0xFC,0xE0,0x00,0x00,0x00,0x00,0x38,0x3F,0x07,0x06,0x06,0x06,0x06,0x67,0xBF,0xB8,0x00," ,
+        "ą":"0x00,0x00,0x40,0x60,0x60,0x60,0x60,0x60,0x60,0xE0,0xC0,0x00,0x00,0x1C,0x3E,0x33,0x33,0x33,0x33,0x33,0x73,0xBF,0xBF,0x00," ,
+        "Ć":"0x00,0x80,0xE0,0x70,0x38,0x18,0x1A,0x1B,0x39,0x70,0x60,0x00,0x00,0x03,0x0F,0x1C,0x38,0x30,0x30,0x30,0x38,0x1C,0x0C,0x00," ,
+        "ć":"0x00,0x80,0xC0,0xE0,0x60,0x60,0x68,0x6C,0x64,0xC0,0x80,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x30,0x18,0x08,0x00," ,
+        "Ĉ":"0x00,0x80,0xE0,0x70,0x3A,0x1B,0x19,0x1B,0x3A,0x70,0x60,0x00,0x00,0x03,0x0F,0x1C,0x38,0x30,0x30,0x30,0x38,0x1C,0x0C,0x00," ,
+        "ĉ":"0x00,0x80,0xC0,0xE0,0x68,0x6C,0x64,0x6C,0x68,0xC0,0x80,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x30,0x18,0x08,0x00," ,
+        "Ċ":"0x00,0x80,0xE0,0x70,0x38,0x18,0x1A,0x18,0x38,0x70,0x60,0x00,0x00,0x03,0x0F,0x1C,0x38,0x30,0x30,0x30,0x38,0x1C,0x0C,0x00," ,
+        "ċ":"0x00,0x80,0xC0,0xE0,0x60,0x60,0x68,0x60,0x60,0xC0,0x80,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x30,0x18,0x08,0x00," ,
+        "Č":"0x00,0x80,0xE0,0x70,0x39,0x1B,0x1A,0x1B,0x39,0x70,0x60,0x00,0x00,0x03,0x0F,0x1C,0x38,0x30,0x30,0x30,0x38,0x1C,0x0C,0x00," ,
+        "č":"0x00,0x80,0xC0,0xE0,0x64,0x6C,0x68,0x6C,0x64,0xC0,0x80,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x30,0x18,0x08,0x00," ,
+        "Ď":"0x00,0xF8,0xF8,0x19,0x1B,0x1A,0x1B,0x39,0x70,0xE0,0x80,0x00,0x00,0x3F,0x3F,0x30,0x30,0x30,0x30,0x38,0x1C,0x0F,0x03,0x00," ,
+        "ď":"0x00,0x80,0xC0,0xE0,0x60,0x60,0xE0,0xFF,0xFF,0x00,0x05,0x03,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x3F,0x3F,0x00,0x00,0x00," ,
+        "Đ":"0xC0,0xFF,0xFF,0xC3,0xC3,0x03,0x03,0x07,0x0E,0xFC,0xF0,0x00,0x00,0x3F,0x3F,0x30,0x30,0x30,0x30,0x38,0x1C,0x0F,0x03,0x00," ,
+        "đ":"0x00,0x80,0xC0,0xE0,0x60,0x60,0x60,0xE4,0xC4,0xFF,0xFF,0x04,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x30,0x3F,0x3F,0x00," ,
+        "Ē":"0x00,0xFC,0xFC,0x8C,0x8D,0x8D,0x8D,0x8D,0x8C,0x0C,0x0C,0x00,0x00,0x3F,0x3F,0x31,0x31,0x31,0x31,0x31,0x31,0x30,0x30,0x00," ,
+        "ē":"0x00,0x80,0xC0,0xE0,0x68,0x68,0x68,0x68,0x68,0xC0,0x80,0x00,0x00,0x0F,0x1F,0x3B,0x33,0x33,0x33,0x33,0x33,0x13,0x01,0x00," ,
+        "Ĕ":"0x00,0xF8,0xF8,0x98,0x99,0x9A,0x9A,0x99,0x98,0x18,0x18,0x00,0x00,0x3F,0x3F,0x31,0x31,0x31,0x31,0x31,0x31,0x30,0x30,0x00," ,
+        "ĕ":"0x00,0x80,0xC0,0xE0,0x64,0x68,0x68,0x68,0x64,0xC0,0x80,0x00,0x00,0x0F,0x1F,0x3B,0x33,0x33,0x33,0x33,0x33,0x13,0x01,0x00," ,
+        "Ė":"0x00,0xF8,0xF8,0x98,0x98,0x98,0x9A,0x98,0x98,0x18,0x18,0x00,0x00,0x3F,0x3F,0x31,0x31,0x31,0x31,0x31,0x31,0x30,0x30,0x00," ,
+        "ė":"0x00,0x80,0xC0,0xE0,0x60,0x60,0x68,0x60,0x60,0xC0,0x80,0x00,0x00,0x0F,0x1F,0x3B,0x33,0x33,0x33,0x33,0x33,0x13,0x01,0x00," ,
+        "Ę":"0x00,0xFF,0xFF,0xC3,0xC3,0xC3,0xC3,0xC3,0xC3,0x03,0x03,0x00,0x00,0x3F,0x3F,0x30,0x30,0x30,0x30,0x30,0x70,0xB0,0xB0,0x00," ,
+        "ę":"0x00,0x80,0xC0,0xE0,0x60,0x60,0x60,0x60,0x60,0xC0,0x80,0x00,0x00,0x0F,0x1F,0x3B,0x33,0x33,0x73,0xB3,0xB3,0x13,0x01,0x00," ,
+        "Ě":"0x00,0xF8,0xF8,0x98,0x99,0x9B,0x9A,0x9B,0x99,0x18,0x18,0x00,0x00,0x3F,0x3F,0x31,0x31,0x31,0x31,0x31,0x31,0x30,0x30,0x00," ,
+        "ě":"0x00,0x80,0xC0,0xE0,0x64,0x6C,0x68,0x6C,0x64,0xC0,0x80,0x00,0x00,0x0F,0x1F,0x3B,0x33,0x33,0x33,0x33,0x33,0x13,0x01,0x00," ,
+        "Ĝ":"0x00,0x80,0xE0,0x70,0x1A,0x1B,0x19,0x1B,0x1A,0x38,0x30,0x00,0x00,0x03,0x0F,0x1C,0x38,0x30,0x33,0x33,0x33,0x3F,0x3F,0x00," ,
+        "ĝ":"0x00,0x80,0xC0,0xE0,0x68,0x6C,0x64,0x6C,0x68,0xE0,0xE0,0x00,0x00,0x03,0xC7,0xCE,0xCC,0xCC,0xCC,0xCC,0xE6,0x7F,0x3F,0x00," ,
+        "Ğ":"0x00,0x80,0xE0,0x70,0x1A,0x19,0x19,0x19,0x1A,0x38,0x30,0x00,0x00,0x03,0x0F,0x1C,0x38,0x30,0x33,0x33,0x33,0x3F,0x3F,0x00," ,
+        "ğ":"0x00,0x80,0xC0,0xE0,0x68,0x64,0x64,0x64,0x68,0xE0,0xE0,0x00,0x00,0x03,0xC7,0xCE,0xCC,0xCC,0xCC,0xCC,0xE6,0x7F,0x3F,0x00," ,
+        "Ġ":"0x00,0x80,0xE0,0x70,0x18,0x18,0x1A,0x18,0x18,0x38,0x30,0x00,0x00,0x03,0x0F,0x1C,0x38,0x30,0x33,0x33,0x33,0x3F,0x3F,0x00," ,
+        "ġ":"0x00,0x80,0xC0,0xE0,0x60,0x60,0x68,0x60,0x60,0xE0,0xE0,0x00,0x00,0x03,0xC7,0xCE,0xCC,0xCC,0xCC,0xCC,0xE6,0x7F,0x3F,0x00," ,
+        "Ģ":"0x00,0xF0,0xFC,0x0E,0x07,0x03,0xC3,0xC3,0xC3,0xC7,0xC6,0x00,0x00,0x03,0x0F,0x1C,0x38,0x30,0xB0,0x70,0x30,0x3F,0x3F,0x00," ,
+        "ģ":"0x00,0x80,0xC0,0xE0,0x60,0x60,0x6C,0x6A,0x60,0xE0,0xE0,0x00,0x00,0x03,0xC7,0xCE,0xCC,0xCC,0xCC,0xCC,0xE6,0x7F,0x3F,0x00," ,
+        "Ĥ":"0x00,0xFC,0xFC,0x80,0x82,0x81,0x81,0x82,0x80,0xFC,0xFC,0x00,0x00,0x3F,0x3F,0x01,0x01,0x01,0x01,0x01,0x01,0x3F,0x3F,0x00," ,
+        "ĥ":"0x00,0xFE,0xFE,0xC0,0x62,0x63,0x61,0xE3,0xC2,0x80,0x00,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x00,0x00," ,
+        "Ħ":"0x02,0xFF,0xFF,0xC2,0xC2,0xC2,0xC2,0xC2,0xC2,0xFF,0xFF,0x02,0x00,0x3F,0x3F,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x00," ,
+        "ħ":"0x04,0xFF,0xFF,0xC4,0x64,0x60,0x60,0xE0,0xC0,0x80,0x00,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x00,0x00," ,
+        "Ĩ":"0x00,0x00,0x00,0x1A,0x19,0xFB,0xFB,0x1A,0x19,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x3F,0x3F,0x30,0x30,0x00,0x00,0x00," ,
+        "ĩ":"0x00,0x00,0x00,0x08,0x64,0xEC,0xE8,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x3F,0x3F,0x30,0x30,0x00,0x00,0x00," ,
+        "Ī":"0x00,0x00,0x00,0x0C,0x0D,0xFD,0xFD,0x0D,0x0C,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x3F,0x3F,0x30,0x30,0x00,0x00,0x00," ,
+        "ī":"0x00,0x00,0x00,0x08,0x68,0xE8,0xE8,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x3F,0x3F,0x30,0x30,0x00,0x00,0x00," ,
+        "Ĭ":"0x00,0x00,0x00,0x18,0x19,0xFA,0xFA,0x19,0x18,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x3F,0x3F,0x30,0x30,0x00,0x00,0x00," ,
+        "ĭ":"0x00,0x00,0x00,0x00,0x64,0xE8,0xE8,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x3F,0x3F,0x30,0x30,0x00,0x00,0x00," ,
+        "Į":"0x00,0x00,0x00,0x03,0x03,0xFF,0xFF,0x03,0x03,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x7F,0xBF,0xB0,0x30,0x00,0x00,0x00," ,
+        "į":"0x00,0x00,0x00,0x00,0x60,0xEC,0xEC,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x7F,0xBF,0xB0,0x30,0x00,0x00,0x00," ,
+        "İ":"0x00,0x00,0x00,0x18,0x18,0xF8,0xFA,0x18,0x18,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x3F,0x3F,0x30,0x30,0x00,0x00,0x00," ,
+        "ı":"0x00,0x00,0x00,0x00,0x60,0xE0,0xE0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x3F,0x3F,0x30,0x30,0x00,0x00,0x00," ,
+        "IJ":"0x00,0x03,0xFF,0xFF,0x03,0x00,0x00,0x00,0x03,0xFF,0xFF,0x00,0x00,0x30,0x3F,0x3F,0x30,0x0C,0x1C,0x30,0x30,0x3F,0x1F,0x00," ,
+        "ij":"0x00,0x00,0x20,0xEC,0xEC,0x00,0x00,0x20,0xEC,0xEC,0x00,0x00,0x00,0x00,0x30,0x3F,0x3F,0x70,0xC0,0xC0,0xFF,0x7F,0x00,0x00," ,
+        "Ĵ":"0x00,0x00,0x00,0x00,0x02,0x03,0x01,0x03,0x02,0xF8,0xF8,0x00,0x00,0x0E,0x1E,0x38,0x30,0x30,0x30,0x30,0x38,0x1F,0x07,0x00," ,
+        "ĵ":"0x00,0x00,0x00,0x00,0x00,0x08,0x6C,0xE4,0xEC,0x08,0x00,0x00,0x00,0x00,0x00,0x60,0xE0,0xC0,0xC0,0xFF,0x7F,0x00,0x00,0x00," ,
+        "Ķ":"0x00,0xFF,0xFF,0xC0,0xE0,0xF0,0x38,0x1C,0x0E,0x07,0x03,0x00,0x00,0x3F,0x3F,0x00,0x01,0xA3,0x67,0x0E,0x1C,0x38,0x30,0x00," ,
+        "ķ":"0x00,0x00,0xFF,0xFF,0x00,0x80,0xC0,0xE0,0x60,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x03,0xA7,0x6F,0x1C,0x38,0x30,0x00,0x00," ,
+        "ĸ":"0x00,0x00,0xE0,0xE0,0x00,0x80,0xC0,0xE0,0x60,0x20,0x00,0x00,0x00,0x00,0x3F,0x3F,0x03,0x07,0x0F,0x1C,0x38,0x30,0x00,0x00," ,
+        "Ĺ":"0x00,0xF8,0xFA,0x03,0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x30,0x30,0x30,0x30,0x30,0x30,0x30,0x30,0x00," ,
+        "ĺ":"0x00,0x00,0x00,0x00,0x18,0xFA,0xFB,0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x3F,0x3F,0x30,0x30,0x00,0x00,0x00," ,
+        "Ļ":"0x00,0xFF,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x30,0x30,0xB0,0x70,0x30,0x30,0x30,0x30,0x00," ,
+        "ļ":"0x00,0x00,0x00,0x00,0x03,0xFF,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0xBF,0x7F,0x30,0x30,0x00,0x00,0x00," ,
+        "Ľ":"0x00,0xFF,0xFF,0x00,0x00,0x05,0x03,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x30,0x30,0x30,0x30,0x30,0x30,0x30,0x30,0x00," ,
+        "ľ":"0x00,0x00,0x00,0x00,0x03,0xFF,0xFF,0x00,0x05,0x03,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x3F,0x3F,0x30,0x30,0x00,0x00,0x00," ,
+        "Ŀ":"0x00,0xFF,0xFF,0x00,0x00,0x00,0x20,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x30,0x30,0x30,0x30,0x30,0x30,0x30,0x30,0x00," ,
+        "ŀ":"0x00,0x00,0x00,0x00,0x03,0xFF,0xFF,0x00,0x40,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x3F,0x3F,0x30,0x30,0x00,0x00,0x00," ,
+        "Ł":"0x80,0xFF,0xFF,0x20,0x10,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x30,0x30,0x30,0x30,0x30,0x30,0x30,0x30,0x00," ,
+        "ł":"0x00,0x00,0x00,0x00,0x83,0xFF,0xFF,0x20,0x10,0x00,0x00,0x00,0x00,0x00,0x00,0x31,0x30,0x3F,0x3F,0x30,0x30,0x00,0x00,0x00," ,
+        "Ń":"0x00,0xFF,0xFF,0x0E,0x38,0xF2,0xC3,0x01,0x00,0xFF,0xFF,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0x03,0x07,0x1C,0x3F,0x3F,0x00," ,
+        "ń":"0x00,0x00,0xE0,0xE0,0x60,0x68,0x6C,0x64,0xE0,0xC0,0x80,0x00,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x00," ,
+        "Ņ":"0x00,0xFF,0xFF,0x0E,0x38,0xF0,0xC0,0x00,0x00,0xFF,0xFF,0x00,0x00,0x3F,0x3F,0x00,0x00,0xA0,0x63,0x07,0x1C,0x3F,0x3F,0x00," ,
+        "ņ":"0x00,0x00,0xE0,0xE0,0x60,0x60,0x60,0x60,0xE0,0xC0,0x80,0x00,0x00,0x00,0x3F,0x3F,0x00,0x00,0xA0,0x60,0x00,0x3F,0x3F,0x00," ,
+        "Ň":"0x00,0xFF,0xFF,0x0E,0x38,0xF1,0xC2,0x01,0x00,0xFF,0xFF,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0x03,0x07,0x1C,0x3F,0x3F,0x00," ,
+        "ň":"0x00,0x00,0xE0,0xE0,0x64,0x6C,0x68,0x6C,0xE4,0xC0,0x80,0x00,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x00," ,
+        "ʼn":"0x00,0x0A,0xE6,0xE0,0x60,0x60,0x60,0x60,0xE0,0xC0,0x80,0x00,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x00," ,
+        "Ŋ":"0x00,0x00,0xFF,0xFF,0x06,0x03,0x03,0x03,0x07,0xFE,0xFC,0x00,0x00,0x00,0x3F,0x3F,0x00,0x00,0x20,0x20,0x30,0x1F,0x0F,0x00," ,
+        "ŋ":"0x00,0x00,0xE0,0xE0,0x60,0x60,0x60,0x60,0xE0,0xC0,0x80,0x00,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0xC0,0xC0,0xFF,0x7F,0x00," ,
+        "Ō":"0x00,0xC0,0xF0,0x38,0x1D,0x0D,0x0D,0x1D,0x38,0xF0,0xC0,0x00,0x00,0x03,0x0F,0x1C,0x38,0x30,0x30,0x38,0x1C,0x0F,0x03,0x00," ,
+        "ō":"0x00,0x80,0xC0,0xE0,0x68,0x68,0x68,0x68,0xE0,0xC0,0x80,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x38,0x1F,0x0F,0x00," ,
+        "Ŏ":"0x00,0x80,0xE0,0x70,0x39,0x1A,0x1A,0x39,0x70,0xE0,0x80,0x00,0x00,0x03,0x0F,0x1C,0x38,0x30,0x30,0x38,0x1C,0x0F,0x03,0x00," ,
+        "ŏ":"0x00,0x80,0xC0,0xE0,0x64,0x68,0x68,0x64,0xE0,0xC0,0x80,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x38,0x1F,0x0F,0x00," ,
+        "Ő":"0x00,0x80,0xE0,0x70,0x3A,0x19,0x1A,0x39,0x70,0xE0,0x80,0x00,0x00,0x03,0x0F,0x1C,0x38,0x30,0x30,0x38,0x1C,0x0F,0x03,0x00," ,
+        "ő":"0x00,0x80,0xC0,0xE0,0x68,0x64,0x68,0x64,0xE0,0xC0,0x80,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x38,0x1F,0x0F,0x00," ,
+        "Œ":"0xF0,0xFC,0x0E,0x03,0x03,0x07,0xFE,0xFF,0xC3,0xC3,0xC3,0x00,0x03,0x0F,0x1C,0x30,0x30,0x38,0x1F,0x3F,0x30,0x30,0x30,0x00," ,
+        "œ":"0x80,0xC0,0xE0,0x60,0x60,0xE0,0xC0,0x60,0x60,0x60,0x40,0x80,0x0F,0x1F,0x38,0x30,0x30,0x1F,0x1F,0x3B,0x33,0x33,0x1B,0x09," ,
+        "Ŕ":"0x00,0xF8,0xF8,0x98,0x98,0x9A,0x9B,0x99,0xF8,0xF0,0x60,0x00,0x00,0x3F,0x3F,0x01,0x01,0x03,0x07,0x0F,0x1D,0x38,0x30,0x00," ,
+        "ŕ":"0x00,0x00,0xE0,0xE0,0xC0,0x60,0x68,0x6C,0x64,0xE0,0xC0,0x00,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00," ,
+        "Ŗ":"0x00,0xFF,0xFF,0x83,0x83,0x83,0x83,0x83,0xC7,0xFE,0x7C,0x00,0x00,0x3F,0x3F,0x01,0x01,0xA3,0x67,0x0F,0x1D,0x38,0x30,0x00," ,
+        "ŗ":"0x00,0x00,0xE0,0xE0,0xC0,0x60,0x60,0x60,0x60,0xE0,0xC0,0x00,0x00,0x00,0x3F,0x3F,0x00,0xA0,0x60,0x00,0x00,0x00,0x00,0x00," ,
+        "Ř":"0x00,0xF8,0xF8,0x99,0x9B,0x9A,0x9B,0x99,0xF8,0xF0,0x60,0x00,0x00,0x3F,0x3F,0x01,0x01,0x03,0x07,0x0F,0x1D,0x38,0x30,0x00," ,
+        "ř":"0x00,0x00,0xE0,0xE0,0xC4,0x6C,0x68,0x6C,0x64,0xE0,0xC0,0x00,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00," ,
+        "Ś":"0x00,0x60,0xF0,0xF8,0x98,0x9A,0x9B,0x99,0x98,0x30,0x20,0x00,0x00,0x0C,0x1C,0x39,0x31,0x31,0x31,0x31,0x3B,0x1F,0x0E,0x00," ,
+        "ś":"0x00,0xC0,0xE0,0x60,0x68,0x6C,0x64,0x60,0x40,0x00,0x00,0x00,0x00,0x11,0x33,0x33,0x33,0x33,0x33,0x3F,0x1E,0x00,0x00,0x00," ,
+        "Ŝ":"0x00,0x60,0xF0,0xF8,0x9A,0x9B,0x99,0x9B,0x9A,0x30,0x20,0x00,0x00,0x0C,0x1C,0x39,0x31,0x31,0x31,0x31,0x3B,0x1F,0x0E,0x00," ,
+        "ŝ":"0x00,0xC0,0xE0,0x68,0x6C,0x64,0x6C,0x68,0x40,0x00,0x00,0x00,0x00,0x11,0x33,0x33,0x33,0x33,0x33,0x3F,0x1E,0x00,0x00,0x00," ,
+        "Ş":"0x00,0x3C,0x7E,0xE7,0xC3,0xC3,0xC3,0xC3,0xC7,0x8E,0x0C,0x00,0x00,0x0C,0x1C,0x38,0x30,0xB0,0xF0,0x30,0x39,0x1F,0x0F,0x00," ,
+        "ş":"0x00,0xC0,0xE0,0x60,0x60,0x60,0x60,0x60,0x40,0x00,0x00,0x00,0x00,0x11,0x33,0x33,0xB3,0xF3,0x33,0x3F,0x1E,0x00,0x00,0x00," ,
+        "Š":"0x00,0x60,0xF0,0xF8,0x99,0x9B,0x9A,0x9B,0x99,0x30,0x20,0x00,0x00,0x0C,0x1C,0x39,0x31,0x31,0x31,0x31,0x3B,0x1F,0x0E,0x00," ,
+        "š":"0x00,0xC0,0xE0,0x64,0x6C,0x68,0x6C,0x64,0x40,0x00,0x00,0x00,0x00,0x11,0x33,0x33,0x33,0x33,0x33,0x3F,0x1E,0x00,0x00,0x00," ,
+        "Ţ":"0x00,0x00,0x03,0x03,0x03,0xFF,0xFF,0x03,0x03,0x03,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xBF,0xBF,0x60,0x00,0x00,0x00,0x00," ,
+        "ţ":"0x00,0x60,0x60,0xFE,0xFE,0x60,0x60,0x60,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x1F,0x3F,0xB0,0xB0,0xF0,0x30,0x00,0x00,0x00," ,
+        "Ť":"0x00,0x00,0x18,0x19,0x1B,0xFA,0xFA,0x1B,0x19,0x18,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0x00,0x00," ,
+        "ť":"0x00,0x60,0x60,0xFE,0xFE,0x60,0x65,0x63,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x1F,0x3F,0x30,0x30,0x30,0x30,0x00,0x00,0x00," ,
+        "Ŧ":"0x00,0x00,0x03,0xC3,0xC3,0xFF,0xFF,0xC3,0xC3,0x03,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0x00,0x00," ,
+        "ŧ":"0x00,0x30,0x30,0xFE,0xFE,0x30,0x30,0x30,0x00,0x00,0x00,0x00,0x00,0x03,0x03,0x1F,0x3F,0x33,0x33,0x30,0x30,0x00,0x00,0x00," ,
+        "Ũ":"0x00,0xF8,0xF8,0x02,0x01,0x03,0x03,0x02,0x01,0xF8,0xF8,0x00,0x00,0x07,0x1F,0x38,0x30,0x30,0x30,0x30,0x38,0x1F,0x07,0x00," ,
+        "ũ":"0x00,0xE0,0xE0,0x08,0x04,0x0C,0x0C,0x08,0x04,0xE0,0xE0,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x18,0x3F,0x3F,0x00," ,
+        "Ū":"0x00,0xFC,0xFC,0x00,0x01,0x01,0x01,0x01,0x00,0xFC,0xFC,0x00,0x00,0x07,0x1F,0x38,0x30,0x30,0x30,0x30,0x38,0x1F,0x07,0x00," ,
+        "ū":"0x00,0xE0,0xE0,0x00,0x08,0x08,0x08,0x08,0x00,0xE0,0xE0,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x18,0x3F,0x3F,0x00," ,
+        "Ŭ":"0x00,0xFC,0xFC,0x00,0x01,0x02,0x02,0x01,0x00,0xFC,0xFC,0x00,0x00,0x07,0x1F,0x38,0x30,0x30,0x30,0x30,0x38,0x1F,0x07,0x00," ,
+        "ŭ":"0x00,0xE0,0xE0,0x00,0x04,0x08,0x08,0x04,0x00,0xE0,0xE0,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x18,0x3F,0x3F,0x00," ,
+        "Ů":"0x00,0xF8,0xF8,0x00,0x06,0x09,0x09,0x06,0x00,0xF8,0xF8,0x00,0x00,0x07,0x1F,0x38,0x30,0x30,0x30,0x30,0x38,0x1F,0x07,0x00," ,
+        "ů":"0x00,0xE0,0xE0,0x00,0x0C,0x12,0x12,0x0C,0x00,0xE0,0xE0,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x18,0x3F,0x3F,0x00," ,
+        "Ű":"0x00,0xF8,0xF8,0x00,0x02,0x01,0x02,0x01,0x00,0xF8,0xF8,0x00,0x00,0x07,0x1F,0x38,0x30,0x30,0x30,0x30,0x38,0x1F,0x07,0x00," ,
+        "ű":"0x00,0xE0,0xE0,0x00,0x08,0x04,0x08,0x04,0x00,0xE0,0xE0,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x18,0x3F,0x3F,0x00," ,
+        "Ų":"0x00,0xFF,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0xFF,0x00,0x00,0x07,0x1F,0x38,0x30,0xF0,0xB0,0xB0,0x38,0x1F,0x07,0x00," ,
+        "ų":"0x00,0xE0,0xE0,0x00,0x00,0x00,0x00,0x00,0x00,0xE0,0xE0,0x00,0x00,0x0F,0x1F,0x38,0x30,0xF0,0xB0,0xB0,0x18,0x3F,0x3F,0x00," ,
+        "Ŵ":"0x00,0xFC,0xFC,0x00,0x02,0x81,0x81,0x02,0x00,0xFC,0xFC,0x00,0x00,0x3F,0x3F,0x1C,0x06,0x03,0x03,0x06,0x1C,0x3F,0x3F,0x00," ,
+        "ŵ":"0x00,0xE0,0xE0,0x00,0x04,0xE8,0xE8,0x04,0x00,0xE0,0xE0,0x00,0x00,0x07,0x1F,0x38,0x1C,0x0F,0x0F,0x1C,0x38,0x1F,0x07,0x00," ,
+        "Ŷ":"0x00,0x02,0x0E,0x3C,0xF2,0xC1,0xC1,0xF2,0x3C,0x0E,0x02,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0x00,0x00," ,
+        "ŷ":"0x00,0x00,0x60,0xE0,0x88,0x04,0x04,0x88,0xE0,0x60,0x00,0x00,0x00,0x00,0x00,0x81,0xE7,0x7E,0x1E,0x07,0x01,0x00,0x00,0x00," ,
+        "Ÿ":"0x00,0x02,0x0E,0x3C,0xF1,0xC0,0xC0,0xF1,0x3C,0x0E,0x02,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0x00,0x00," ,
+        "Ź":"0x00,0x18,0x18,0x18,0x18,0x1A,0x9B,0xD9,0xF8,0x78,0x38,0x00,0x00,0x30,0x38,0x3C,0x3E,0x37,0x33,0x31,0x30,0x30,0x30,0x00," ,
+        "ź":"0x00,0x60,0x60,0x60,0x68,0x6C,0xE4,0xE0,0x60,0x20,0x00,0x00,0x00,0x30,0x38,0x3C,0x36,0x33,0x31,0x30,0x30,0x30,0x00,0x00," ,
+        "Ż":"0x00,0x18,0x18,0x18,0x18,0x18,0x9A,0xD8,0xF8,0x78,0x38,0x00,0x00,0x30,0x38,0x3C,0x3E,0x37,0x33,0x31,0x30,0x30,0x30,0x00," ,
+        "ż":"0x00,0x60,0x60,0x60,0x60,0x68,0xE0,0xE0,0x60,0x20,0x00,0x00,0x00,0x30,0x38,0x3C,0x36,0x33,0x31,0x30,0x30,0x30,0x00,0x00," ,
+        "Ž":"0x00,0x18,0x18,0x18,0x19,0x1B,0x9A,0xDB,0xF9,0x78,0x38,0x00,0x00,0x30,0x38,0x3C,0x3E,0x37,0x33,0x31,0x30,0x30,0x30,0x00," ,
+        "ž":"0x00,0x60,0x60,0x64,0x6C,0x68,0xEC,0xE4,0x60,0x20,0x00,0x00,0x00,0x30,0x38,0x3C,0x36,0x33,0x31,0x30,0x30,0x30,0x00,0x00," ,
+        "ſ":"0x00,0x00,0x00,0x00,0xFC,0xFE,0x06,0x06,0x0E,0x0C,0x00,0x00,0x00,0x00,0x30,0x30,0x3F,0x3F,0x30,0x00,0x00,0x00,0x00,0x00," ,
+    }
+    return font
+
+def getSmallFontMap():
+	font = {
+		" ":"0x00, 0x00, 0x00, 0x00, 0x00, 0x00,",
+		"!":"0x00, 0x00, 0x4f, 0x00, 0x00, 0x00,",
+		"\"":"0x00, 0x07, 0x00, 0x07, 0x00, 0x00,",
+		"#":"0x14, 0x7f, 0x14, 0x7f, 0x14, 0x00,",
+		"$":"0x24, 0x2a, 0x7f, 0x2a, 0x12, 0x00,",
+		"%":"0x23, 0x13, 0x08, 0x64, 0x62, 0x00,",
+		"&":"0x36, 0x49, 0x56, 0x20, 0x58, 0x00,",
+		"'":"0x00, 0x05, 0x03, 0x00, 0x00, 0x00,",
+		"(":"0x00, 0x1c, 0x22, 0x41, 0x00, 0x00,",
+		")":"0x00, 0x41, 0x22, 0x1c, 0x00, 0x00,",
+		"*":"0x14, 0x08, 0x3e, 0x08, 0x14, 0x00,",
+		"+":"0x08, 0x08, 0x3e, 0x08, 0x08, 0x00,",
+		",":"0x00, 0x50, 0x30, 0x00, 0x00, 0x00,",
+		"-":"0x08, 0x08, 0x08, 0x08, 0x08, 0x00,",
+		".":"0x00, 0x60, 0x60, 0x00, 0x00, 0x00,",
+		"/":"0x20, 0x10, 0x08, 0x04, 0x02, 0x00,",
+		"0":"0x3e, 0x51, 0x49, 0x45, 0x3e, 0x00,",
+		"1":"0x00, 0x42, 0x7f, 0x40, 0x00, 0x00,",
+		"2":"0x42, 0x61, 0x51, 0x49, 0x46, 0x00,",
+		"3":"0x21, 0x41, 0x45, 0x4b, 0x31, 0x00,",
+		"4":"0x18, 0x14, 0x12, 0x7f, 0x10, 0x00,",
+		"5":"0x27, 0x45, 0x45, 0x45, 0x39, 0x00,",
+		"6":"0x3c, 0x4a, 0x49, 0x49, 0x30, 0x00,",
+		"7":"0x01, 0x71, 0x09, 0x05, 0x03, 0x00,",
+		"8":"0x36, 0x49, 0x49, 0x49, 0x36, 0x00,",
+		"9":"0x06, 0x49, 0x49, 0x29, 0x1e, 0x00,",
+		":":"0x00, 0x36, 0x36, 0x00, 0x00, 0x00,",
+		";":"0x00, 0x56, 0x36, 0x00, 0x00, 0x00,",
+		"<":"0x08, 0x14, 0x22, 0x41, 0x00, 0x00,",
+		"=":"0x14, 0x14, 0x14, 0x14, 0x14, 0x00,",
+		">":"0x00, 0x41, 0x22, 0x14, 0x08, 0x00,",
+		"?":"0x02, 0x01, 0x51, 0x09, 0x06, 0x00,",
+		"@":"0x32, 0x49, 0x79, 0x41, 0x3e, 0x00,",
+		"A":"0x7e, 0x09, 0x09, 0x09, 0x7e, 0x00,",
+		"B":"0x7f, 0x49, 0x49, 0x49, 0x36, 0x00,",
+		"C":"0x3e, 0x41, 0x41, 0x41, 0x22, 0x00,",
+		"D":"0x7f, 0x41, 0x41, 0x22, 0x1c, 0x00,",
+		"E":"0x7f, 0x49, 0x49, 0x49, 0x41, 0x00,",
+		"F":"0x7f, 0x09, 0x09, 0x09, 0x01, 0x00,",
+		"G":"0x3e, 0x41, 0x41, 0x49, 0x7a, 0x00,",
+		"H":"0x7f, 0x08, 0x08, 0x08, 0x7f, 0x00,",
+		"I":"0x00, 0x41, 0x7f, 0x41, 0x00, 0x00,",
+		"J":"0x20, 0x40, 0x41, 0x3f, 0x01, 0x00,",
+		"K":"0x7f, 0x08, 0x14, 0x22, 0x41, 0x00,",
+		"L":"0x7f, 0x40, 0x40, 0x40, 0x40, 0x00,",
+		"M":"0x7f, 0x02, 0x0c, 0x02, 0x7f, 0x00,",
+		"N":"0x7f, 0x04, 0x08, 0x10, 0x7f, 0x00,",
+		"O":"0x3e, 0x41, 0x41, 0x41, 0x3e, 0x00,",
+		"P":"0x7f, 0x09, 0x09, 0x09, 0x06, 0x00,",
+		"Q":"0x3e, 0x41, 0x51, 0x21, 0x5e, 0x00,",
+		"R":"0x7f, 0x09, 0x19, 0x29, 0x46, 0x00,",
+		"S":"0x26, 0x49, 0x49, 0x49, 0x32, 0x00,",
+		"T":"0x01, 0x01, 0x7f, 0x01, 0x01, 0x00,",
+		"U":"0x3f, 0x40, 0x40, 0x40, 0x3f, 0x00,",
+		"V":"0x1f, 0x20, 0x40, 0x20, 0x1f, 0x00,",
+		"W":"0x3f, 0x40, 0x38, 0x40, 0x3f, 0x00,",
+		"X":"0x63, 0x14, 0x08, 0x14, 0x63, 0x00,",
+		"Y":"0x07, 0x08, 0x70, 0x08, 0x07, 0x00,",
+		"Z":"0x61, 0x51, 0x49, 0x45, 0x43, 0x00,",
+		"[":"0x00, 0x7f, 0x41, 0x41, 0x00, 0x00,",
+		"\\":"0x02, 0x04, 0x08, 0x10, 0x20, 0x00,",
+		"]":"0x00, 0x41, 0x41, 0x7f, 0x00, 0x00,",
+		"^":"0x04, 0x02, 0x01, 0x02, 0x04, 0x00,",
+		"_":"0x40, 0x40, 0x40, 0x40, 0x40, 0x00,",
+		"`":"0x00, 0x03, 0x05, 0x00, 0x00, 0x00,",
+		"a":"0x20, 0x54, 0x54, 0x54, 0x78, 0x00,",
+		"b":"0x7f, 0x48, 0x44, 0x44, 0x38, 0x00,",
+		"c":"0x38, 0x44, 0x44, 0x44, 0x20, 0x00,",
+		"d":"0x38, 0x44, 0x44, 0x48, 0x7f, 0x00,",
+		"e":"0x38, 0x54, 0x54, 0x54, 0x18, 0x00,",
+		"f":"0x00, 0x04, 0x7e, 0x05, 0x01, 0x00,",
+		"g":"0x08, 0x54, 0x54, 0x54, 0x3c, 0x00,",
+		"h":"0x7f, 0x08, 0x04, 0x04, 0x78, 0x00,",
+		"i":"0x00, 0x44, 0x7d, 0x40, 0x00, 0x00,",
+		"j":"0x20, 0x40, 0x44, 0x3d, 0x00, 0x00,",
+		"k":"0x00, 0x7f, 0x10, 0x28, 0x44, 0x00,",
+		"l":"0x00, 0x41, 0x7f, 0x40, 0x00, 0x00,",
+		"m":"0x7c, 0x04, 0x78, 0x04, 0x78, 0x00,",
+		"n":"0x7c, 0x08, 0x04, 0x04, 0x78, 0x00,",
+		"o":"0x38, 0x44, 0x44, 0x44, 0x38, 0x00,",
+		"p":"0x7c, 0x14, 0x14, 0x14, 0x08, 0x00,",
+		"q":"0x08, 0x14, 0x14, 0x14, 0x7c, 0x00,",
+		"r":"0x7c, 0x08, 0x04, 0x04, 0x08, 0x00,",
+		"s":"0x48, 0x54, 0x54, 0x54, 0x24, 0x00,",
+		"t":"0x04, 0x3e, 0x44, 0x40, 0x20, 0x00,",
+		"u":"0x3c, 0x40, 0x40, 0x20, 0x7c, 0x00,",
+		"v":"0x0c, 0x30, 0x40, 0x30, 0x0c, 0x00,",
+		"w":"0x3c, 0x40, 0x30, 0x40, 0x3c, 0x00,",
+		"x":"0x44, 0x24, 0x38, 0x48, 0x44, 0x00,",
+		"y":"0x44, 0x48, 0x30, 0x10, 0x0c, 0x00,",
+		"z":"0x44, 0x64, 0x54, 0x4c, 0x44, 0x00,",
+		"{":"0x08, 0x36, 0x41, 0x00, 0x00, 0x00,",
+		"|":"0x00, 0x00, 0x77, 0x00, 0x00, 0x00,",
+		"}":"0x00, 0x00, 0x41, 0x36, 0x08, 0x00,",
+		"~":"0x02, 0x01, 0x02, 0x04, 0x02, 0x00,",
+		"^":"0x04, 0x02, 0x01, 0x02, 0x04, 0x00,",
+		" ":"0x00, 0x00, 0x00, 0x00, 0x00, 0x00,",
+		"¡":"0x00, 0x00, 0x79, 0x00, 0x00, 0x00,",
+		"¢":"0x1c, 0x22, 0x7f, 0x22, 0x10, 0x00,",
+		"£":"0x50, 0x7e, 0x51, 0x41, 0x42, 0x00,",
+		"¤":"0x22, 0x1c, 0x14, 0x1c, 0x22, 0x00,",
+		"¥":"0x15, 0x16, 0x7c, 0x16, 0x15, 0x00,",
+		"¦":"0x00, 0x00, 0x77, 0x00, 0x00, 0x00,",
+		"§":"0x4a, 0x55, 0x55, 0x55, 0x29, 0x00,",
+		"¨":"0x00, 0x01, 0x00, 0x01, 0x00, 0x00,",
+		"©":"0x00, 0x18, 0x24, 0x24, 0x00, 0x00,",
+		"ª":"0x00, 0x00, 0x00, 0x00, 0x00, 0x00,",
+		"«":"0x08, 0x14, 0x00, 0x08, 0x14, 0x00,",
+		"¬":"0x08, 0x08, 0x08, 0x08, 0x38, 0x00,",
+		"­":"0x08, 0x08, 0x08, 0x08, 0x08, 0x00,",
+		"®":"0x00, 0x00, 0x00, 0x00, 0x00, 0x00,",
+		"¯":"0x00, 0x01, 0x01, 0x01, 0x00, 0x00,",
+		"°":"0x00, 0x00, 0x07, 0x05, 0x07, 0x00,",
+		"±":"0x44, 0x44, 0x5f, 0x44, 0x44, 0x00,",
+		"²":"0x1d, 0x15, 0x17, 0x00, 0x00, 0x00,",
+		"³":"0x15, 0x15, 0x1f, 0x00, 0x00, 0x00,",
+		"´":"0x00, 0x04, 0x02, 0x01, 0x00, 0x00,",
+		"µ":"0x7c, 0x10, 0x10, 0x0c, 0x10, 0x00,",
+		"¶":"0x02, 0x07, 0x7f, 0x01, 0x7f, 0x00,",
+		"·":"0x00, 0x00, 0x08, 0x00, 0x00, 0x00,",
+		"¸":"0x00, 0x40, 0x60, 0x00, 0x00, 0x00,",
+		"¹":"0x12, 0x1f, 0x10, 0x00, 0x00, 0x00,",
+		"º":"0x07, 0x05, 0x07, 0x00, 0x00, 0x00,",
+		"»":"0x14, 0x08, 0x00, 0x14, 0x08, 0x00,",
+		"¼":"0x21, 0x17, 0x38, 0x24, 0x72, 0x00,",
+		"½":"0x21, 0x17, 0x78, 0x54, 0x5e, 0x00,",
+		"¾":"0x00, 0x00, 0x00, 0x00, 0x00, 0x00,",
+		"¿":"0x30, 0x48, 0x45, 0x40, 0x20, 0x00,",
+		"À":"0x78, 0x15, 0x16, 0x14, 0x78, 0x00,",
+		"Á":"0x78, 0x14, 0x16, 0x15, 0x78, 0x00,",
+		"Â":"0x78, 0x16, 0x15, 0x16, 0x78, 0x00,",
+		"Ã":"0x7a, 0x29, 0x2a, 0x79, 0x00, 0x00,",
+		"Ä":"0x78, 0x15, 0x14, 0x15, 0x78, 0x00,",
+		"Å":"0x78, 0x14, 0x15, 0x14, 0x78, 0x00,",
+		"Æ":"0x7e, 0x09, 0x7f, 0x49, 0x49, 0x00,",
+		"Ç":"0x0e, 0x51, 0x71, 0x11, 0x08, 0x00,",
+		"È":"0x7c, 0x55, 0x56, 0x44, 0x44, 0x00,",
+		"É":"0x7c, 0x54, 0x56, 0x45, 0x44, 0x00,",
+		"Ê":"0x7c, 0x56, 0x55, 0x46, 0x44, 0x00,",
+		"Ë":"0x7c, 0x55, 0x54, 0x45, 0x44, 0x00,",
+		"Ì":"0x00, 0x49, 0x7a, 0x48, 0x00, 0x00,",
+		"Í":"0x00, 0x48, 0x7a, 0x49, 0x00, 0x00,",
+		"Î":"0x00, 0x4a, 0x79, 0x4a, 0x00, 0x00,",
+		"Ï":"0x44, 0x45, 0x7c, 0x45, 0x44, 0x00,",
+		"Ð":"0x08, 0x7f, 0x49, 0x22, 0x1c, 0x00,",
+		"Ñ":"0x7a, 0x11, 0x22, 0x79, 0x00, 0x00,",
+		"Ò":"0x38, 0x45, 0x46, 0x44, 0x38, 0x00,",
+		"Ó":"0x38, 0x44, 0x46, 0x45, 0x38, 0x00,",
+		"Ô":"0x38, 0x46, 0x45, 0x46, 0x38, 0x00,",
+		"Õ":"0x32, 0x49, 0x4a, 0x31, 0x00, 0x00,",
+		"Ö":"0x38, 0x45, 0x44, 0x45, 0x38, 0x00,",
+		"×":"0x22, 0x14, 0x08, 0x14, 0x22, 0x00,",
+		"Ø":"0x58, 0x24, 0x54, 0x48, 0x34, 0x00,",
+		"Ù":"0x38, 0x41, 0x42, 0x40, 0x38, 0x00,",
+		"Ú":"0x38, 0x40, 0x42, 0x41, 0x38, 0x00,",
+		"Û":"0x38, 0x42, 0x41, 0x42, 0x38, 0x00,",
+		"Ü":"0x3c, 0x41, 0x40, 0x41, 0x3c, 0x00,",
+		"Ý":"0x04, 0x08, 0x72, 0x09, 0x04, 0x00,",
+		"Þ":"0x7f, 0x22, 0x22, 0x22, 0x1c, 0x00,",
+		"ß":"0x7e, 0x11, 0x25, 0x25, 0x1a, 0x00,",
+		"à":"0x20, 0x55, 0x56, 0x54, 0x78, 0x00,",
+		"á":"0x20, 0x54, 0x56, 0x55, 0x78, 0x00,",
+		"â":"0x20, 0x56, 0x55, 0x56, 0x78, 0x00,",
+		"ã":"0x22, 0x55, 0x56, 0x55, 0x78, 0x00,",
+		"ä":"0x20, 0x55, 0x54, 0x55, 0x78, 0x00,",
+		"å":"0x20, 0x54, 0x55, 0x54, 0x78, 0x00,",
+		"æ":"0x24, 0x54, 0x7c, 0x54, 0x48, 0x00,",
+		"ç":"0x1c, 0x22, 0x62, 0x22, 0x10, 0x00,",
+		"è":"0x38, 0x55, 0x56, 0x54, 0x08, 0x00,",
+		"é":"0x38, 0x54, 0x56, 0x55, 0x08, 0x00,",
+		"ê":"0x38, 0x56, 0x55, 0x56, 0x08, 0x00,",
+		"ë":"0x38, 0x55, 0x54, 0x55, 0x08, 0x00,",
+		"ì":"0x00, 0x45, 0x7e, 0x40, 0x00, 0x00,",
+		"í":"0x00, 0x44, 0x7e, 0x41, 0x00, 0x00,",
+		"î":"0x00, 0x46, 0x7d, 0x42, 0x00, 0x00,",
+		"ï":"0x00, 0x45, 0x7c, 0x41, 0x00, 0x00,",
+		"ð":"0x00, 0x00, 0x00, 0x00, 0x00, 0x00,",
+		"ñ":"0x78, 0x12, 0x09, 0x0a, 0x71, 0x00,",
+		"ò":"0x38, 0x45, 0x46, 0x44, 0x38, 0x00,",
+		"ó":"0x38, 0x44, 0x46, 0x45, 0x38, 0x00,",
+		"ô":"0x38, 0x46, 0x45, 0x46, 0x38, 0x00,",
+		"õ":"0x32, 0x49, 0x4a, 0x31, 0x00, 0x00,",
+		"ö":"0x38, 0x45, 0x44, 0x45, 0x38, 0x00,",
+		"÷":"0x08, 0x08, 0x2a, 0x08, 0x08, 0x00,",
+		"ø":"0x58, 0x24, 0x54, 0x48, 0x34, 0x00,",
+		"ù":"0x3c, 0x41, 0x42, 0x20, 0x7c, 0x00,",
+		"ú":"0x3c, 0x40, 0x42, 0x21, 0x7c, 0x00,",
+		"û":"0x3c, 0x42, 0x41, 0x22, 0x7c, 0x00,",
+		"ü":"0x3c, 0x41, 0x40, 0x21, 0x5c, 0x00,",
+		"ý":"0x44, 0x48, 0x32, 0x11, 0x0c, 0x00,",
+		"þ":"0x7c, 0x28, 0x28, 0x10, 0x00, 0x00,",
+		"ÿ":"0x44, 0x49, 0x30, 0x11, 0x0c, 0x00,",
+		"Ѐ":"0x7c, 0x55, 0x56, 0x44, 0x44, 0x00,",
+		"Ё":"0x7c, 0x55, 0x54, 0x45, 0x44, 0x00,",
+		"Ђ":"0x01, 0x7f, 0x09, 0x49, 0x31, 0x00,",
+		"Ѓ":"0x7c, 0x04, 0x06, 0x05, 0x04, 0x00,",
+		"Є":"0x3e, 0x49, 0x49, 0x41, 0x00, 0x00,",
+		"Ѕ":"0x06, 0x49, 0x49, 0x49, 0x30, 0x00,",
+		"І":"0x41, 0x41, 0x7f, 0x41, 0x41, 0x00,",
+		"Ї":"0x44, 0x45, 0x7c, 0x45, 0x44, 0x00,",
+		"Ј":"0x20, 0x40, 0x41, 0x3f, 0x01, 0x00,",
+		"Љ":"0x7f, 0x01, 0x7f, 0x48, 0x30, 0x00,",
+		"Њ":"0x7f, 0x08, 0x7f, 0x48, 0x30, 0x00,",
+		"Ћ":"0x01, 0x01, 0x7f, 0x09, 0x71, 0x00,",
+		"Ќ":"0x7c, 0x12, 0x29, 0x44, 0x00, 0x00,",
+		"Ѝ":"0x7c, 0x21, 0x12, 0x08, 0x7c, 0x00,",
+		"Ў":"0x44, 0x49, 0x32, 0x09, 0x04, 0x00,",
+		"Џ":"0x3f, 0x20, 0x60, 0x20, 0x3f, 0x00,",
+		"А":"0x7e, 0x09, 0x09, 0x09, 0x7e, 0x00,",
+		"Б":"0x7f, 0x49, 0x49, 0x49, 0x31, 0x00,",
+		"В":"0x7f, 0x49, 0x49, 0x49, 0x36, 0x00,",
+		"Г":"0x7f, 0x01, 0x01, 0x01, 0x01, 0x00,",
+		"Д":"0x60, 0x3f, 0x21, 0x3f, 0x60, 0x00,",
+		"Е":"0x7f, 0x49, 0x49, 0x49, 0x41, 0x00,",
+		"Ж":"0x77, 0x08, 0x7f, 0x08, 0x77, 0x00,",
+		"З":"0x00, 0x41, 0x49, 0x49, 0x36, 0x00,",
+		"И":"0x7f, 0x10, 0x08, 0x04, 0x7f, 0x00,",
+		"Й":"0x7c, 0x21, 0x12, 0x09, 0x7c, 0x00,",
+		"К":"0x7f, 0x08, 0x14, 0x22, 0x41, 0x00,",
+		"Л":"0x40, 0x3f, 0x01, 0x01, 0x7f, 0x00,",
+		"М":"0x7f, 0x02, 0x04, 0x02, 0x7f, 0x00,",
+		"Н":"0x7f, 0x08, 0x08, 0x08, 0x7f, 0x00,",
+		"О":"0x3e, 0x41, 0x41, 0x41, 0x3e, 0x00,",
+		"П":"0x7f, 0x01, 0x01, 0x01, 0x7f, 0x00,",
+		"Р":"0x7f, 0x09, 0x09, 0x09, 0x06, 0x00,",
+		"С":"0x3e, 0x41, 0x41, 0x41, 0x22, 0x00,",
+		"Т":"0x01, 0x01, 0x7f, 0x01, 0x01, 0x00,",
+		"У":"0x47, 0x48, 0x30, 0x08, 0x07, 0x00,",
+		"Ф":"0x0c, 0x12, 0x7f, 0x12, 0x0c, 0x00,",
+		"Х":"0x63, 0x14, 0x08, 0x14, 0x63, 0x00,",
+		"Ц":"0x3f, 0x20, 0x20, 0x3f, 0x60, 0x00,",
+		"Ч":"0x07, 0x08, 0x08, 0x08, 0x7f, 0x00,",
+		"Ш":"0x3f, 0x20, 0x3f, 0x20, 0x3f, 0x00,",
+		"Щ":"0x3f, 0x20, 0x3f, 0x20, 0x3f, 0x60,",
+		"Ъ":"0x01, 0x7f, 0x48, 0x48, 0x30, 0x00,",
+		"Ы":"0x7f, 0x48, 0x30, 0x00, 0x7f, 0x00,",
+		"Ь":"0x00, 0x7f, 0x48, 0x48, 0x30, 0x00,",
+		"Э":"0x22, 0x49, 0x49, 0x2a, 0x1c, 0x00,",
+		"Ю":"0x7f, 0x08, 0x3e, 0x41, 0x3e, 0x00,",
+		"Я":"0x46, 0x29, 0x19, 0x09, 0x7f, 0x00,",
+		"а":"0x20, 0x54, 0x54, 0x54, 0x78, 0x00,",
+		"б":"0x3c, 0x4a, 0x4a, 0x4a, 0x30, 0x00,",
+		"в":"0x7c, 0x54, 0x54, 0x54, 0x28, 0x00,",
+		"г":"0x7c, 0x04, 0x04, 0x04, 0x04, 0x00,",
+		"д":"0x40, 0x3c, 0x24, 0x3c, 0x60, 0x00,",
+		"е":"0x38, 0x54, 0x54, 0x54, 0x18, 0x00,",
+		"ж":"0x6c, 0x10, 0x7c, 0x10, 0x6c, 0x00,",
+		"з":"0x28, 0x44, 0x54, 0x54, 0x28, 0x00,",
+		"и":"0x7c, 0x20, 0x10, 0x08, 0x7c, 0x00,",
+		"й":"0x7c, 0x21, 0x12, 0x09, 0x7c, 0x00,",
+		"к":"0x7c, 0x10, 0x28, 0x44, 0x00, 0x00,",
+		"л":"0x40, 0x3c, 0x04, 0x04, 0x7c, 0x00,",
+		"м":"0x7c, 0x08, 0x10, 0x08, 0x7c, 0x00,",
+		"н":"0x7c, 0x10, 0x10, 0x10, 0x7c, 0x00,",
+		"о":"0x38, 0x44, 0x44, 0x44, 0x38, 0x00,",
+		"п":"0x7c, 0x04, 0x04, 0x04, 0x7c, 0x00,",
+		"р":"0x7c, 0x14, 0x14, 0x14, 0x08, 0x00,",
+		"с":"0x38, 0x44, 0x44, 0x44, 0x20, 0x00,",
+		"т":"0x04, 0x04, 0x7c, 0x04, 0x04, 0x00,",
+		"у":"0x4c, 0x50, 0x20, 0x10, 0x0c, 0x00,",
+		"ф":"0x18, 0x24, 0x7e, 0x24, 0x18, 0x00,",
+		"х":"0x44, 0x28, 0x10, 0x28, 0x44, 0x00,",
+		"ц":"0x3c, 0x20, 0x20, 0x3c, 0x60, 0x00,",
+		"ч":"0x0c, 0x10, 0x10, 0x10, 0x7c, 0x00,",
+		"ш":"0x3c, 0x20, 0x3c, 0x20, 0x3c, 0x00,",
+		"щ":"0x3c, 0x20, 0x3c, 0x20, 0x7c, 0x00,",
+		"ъ":"0x04, 0x7c, 0x50, 0x20, 0x00, 0x00,",
+		"ы":"0x7c, 0x50, 0x20, 0x00, 0x7c, 0x00,",
+		"ь":"0x00, 0x7c, 0x50, 0x20, 0x00, 0x00,",
+		"э":"0x28, 0x44, 0x54, 0x54, 0x28, 0x00,",
+		"ю":"0x7c, 0x10, 0x38, 0x44, 0x38, 0x00,",
+		"я":"0x48, 0x34, 0x14, 0x14, 0x7c, 0x00,",
+		"ѐ":"0x38, 0x55, 0x56, 0x54, 0x08, 0x00,",
+		"ё":"0x38, 0x55, 0x54, 0x55, 0x08, 0x00,",
+		"ђ":"0x02, 0x3f, 0x12, 0x48, 0x30, 0x00,",
+		"ѓ":"0x7c, 0x04, 0x06, 0x05, 0x04, 0x00,",
+		"є":"0x38, 0x54, 0x54, 0x44, 0x28, 0x00,",
+		"ѕ":"0x08, 0x54, 0x54, 0x54, 0x20, 0x00,",
+		"і":"0x00, 0x44, 0x7d, 0x40, 0x00, 0x00,",
+		"ї":"0x00, 0x45, 0x7c, 0x41, 0x00, 0x00,",
+		"ј":"0x20, 0x40, 0x44, 0x3d, 0x00, 0x00,",
+		"љ":"0x7c, 0x04, 0x7c, 0x50, 0x20, 0x00,",
+		"њ":"0x7c, 0x10, 0x7c, 0x50, 0x20, 0x00,",
+		"ћ":"0x04, 0x7e, 0x14, 0x10, 0x60, 0x00,",
+		"ќ":"0x7c, 0x12, 0x29, 0x44, 0x00, 0x00,",
+		"ѝ":"0x7c, 0x21, 0x12, 0x08, 0x7c, 0x00,",
+		"ў":"0x4c, 0x51, 0x22, 0x11, 0x0c, 0x00,",
+		"џ":"0x3c, 0x20, 0x60, 0x20, 0x3c, 0x00,",
+		"Ā":"0x78, 0x15, 0x15, 0x15, 0x78, 0x00,",
+		"ā":"0x20, 0x55, 0x55, 0x55, 0x78, 0x00,",
+		"Ă":"0x78, 0x15, 0x16, 0x15, 0x78, 0x00,",
+		"ă":"0x20, 0x55, 0x56, 0x55, 0x78, 0x00,",
+		"Ą":"0x7e, 0x09, 0x09, 0x49, 0xbe, 0x00,",
+		"ą":"0x20, 0x54, 0x54, 0xd4, 0x78, 0x00,",
+		"Ć":"0x38, 0x44, 0x46, 0x45, 0x28, 0x00,",
+		"ć":"0x38, 0x44, 0x46, 0x45, 0x20, 0x00,",
+		"Ĉ":"0x38, 0x46, 0x45, 0x46, 0x28, 0x00,",
+		"ĉ":"0x38, 0x46, 0x45, 0x46, 0x20, 0x00,",
+		"Ċ":"0x38, 0x44, 0x45, 0x44, 0x28, 0x00,",
+		"ċ":"0x38, 0x44, 0x45, 0x44, 0x20, 0x00,",
+		"Č":"0x38, 0x45, 0x46, 0x45, 0x28, 0x00,",
+		"č":"0x38, 0x45, 0x46, 0x45, 0x20, 0x00,",
+		"Ď":"0x7c, 0x45, 0x46, 0x29, 0x10, 0x00,",
+		"ď":"0x00, 0x00, 0x00, 0x00, 0x00, 0x00,",
+		"Đ":"0x08, 0x7f, 0x49, 0x22, 0x1c, 0x00,",
+		"đ":"0x38, 0x44, 0x44, 0x4A, 0x7F, 0x00,",
+		"Ē":"0x7c, 0x55, 0x55, 0x55, 0x44, 0x00,",
+		"ē":"0x38, 0x55, 0x55, 0x55, 0x08, 0x00,",
+		"Ĕ":"0x7c, 0x55, 0x56, 0x55, 0x44, 0x00,",
+		"ĕ":"0x38, 0x55, 0x56, 0x55, 0x08, 0x00,",
+		"Ė":"0x7c, 0x54, 0x55, 0x54, 0x44, 0x00,",
+		"ė":"0x38, 0x54, 0x55, 0x54, 0x08, 0x00,",
+		"Ę":"0x7f, 0x49, 0x49, 0xc9, 0x41, 0x00,",
+		"ę":"0x38, 0x54, 0x54, 0xd4, 0x18, 0x00,",
+		"Ě":"0x7c, 0x55, 0x56, 0x55, 0x44, 0x00,",
+		"ě":"0x38, 0x55, 0x56, 0x55, 0x08, 0x00,",
+		"Ĝ":"0x38, 0x46, 0x55, 0x56, 0x70, 0x00,",
+		"ĝ":"0x08, 0x56, 0x55, 0x56, 0x3c, 0x00,",
+		"Ğ":"0x38, 0x45, 0x56, 0x55, 0x30, 0x00,",
+		"ğ":"0x08, 0x55, 0x56, 0x55, 0x3c, 0x00,",
+		"Ġ":"0x38, 0x44, 0x55, 0x54, 0x30, 0x00,",
+		"ġ":"0x08, 0x54, 0x55, 0x54, 0x3c, 0x00,",
+		"Ģ":"0x0e, 0x51, 0x35, 0x15, 0x1c, 0x00,",
+		"ģ":"0x00, 0x00, 0x00, 0x00, 0x00, 0x00,",
+		"Ĥ":"0x7c, 0x12, 0x11, 0x12, 0x7c, 0x00,",
+		"ĥ":"0x02, 0x79, 0x22, 0x10, 0x60, 0x00,",
+		"Ħ":"0x02, 0x7f, 0x0a, 0x7f, 0x02, 0x00,",
+		"ħ":"0x02, 0x7f, 0x12, 0x08, 0x70, 0x00,",
+		"Ĩ":"0x4a, 0x49, 0x7a, 0x49, 0x48, 0x00,",
+		"ĩ":"0x02, 0x49, 0x7a, 0x41, 0x00, 0x00,",
+		"Ī":"0x44, 0x45, 0x7d, 0x45, 0x44, 0x00,",
+		"ī":"0x00, 0x45, 0x7d, 0x41, 0x00, 0x00,",
+		"Ĭ":"0x44, 0x45, 0x7e, 0x45, 0x44, 0x00,",
+		"ĭ":"0x00, 0x45, 0x7e, 0x41, 0x00, 0x00,",
+		"Į":"0x00, 0x41, 0x7f, 0xc1, 0x00, 0x00,",
+		"į":"0x00, 0x44, 0x7d, 0xc0, 0x00, 0x00,",
+		"İ":"0x44, 0x44, 0x7d, 0x44, 0x44, 0x00,",
+		"ı":"0x00, 0x44, 0x7c, 0x40, 0x00, 0x00,",
+		"IJ":"0x00, 0x00, 0x00, 0x00, 0x00, 0x00,",
+		"ij":"0x44, 0x7d, 0x40, 0x44, 0x3d, 0x00,",
+		"Ĵ":"0x20, 0x40, 0x46, 0x3d, 0x06, 0x00,",
+		"ĵ":"0x00, 0x20, 0x46, 0x3d, 0x02, 0x00,",
+		"Ķ":"0x1f, 0x44, 0x2a, 0x11, 0x00, 0x00,",
+		"ķ":"0x1f, 0x44, 0x2a, 0x11, 0x00, 0x00,",
+		"ĸ":"0x7c, 0x10, 0x28, 0x44, 0x00, 0x00,",
+		"Ĺ":"0x7c, 0x40, 0x42, 0x41, 0x40, 0x00,",
+		"ĺ":"0x00, 0x44, 0x7e, 0x41, 0x00, 0x00,",
+		"Ļ":"0x1f, 0x50, 0x30, 0x10, 0x10, 0x00,",
+		"ļ":"0x00, 0x51, 0x3f, 0x10, 0x00, 0x00,",
+		"Ľ":"0x00, 0x00, 0x00, 0x00, 0x00, 0x00,",
+		"ľ":"0x00, 0x00, 0x00, 0x00, 0x00, 0x00,",
+		"Ŀ":"0x7f, 0x40, 0x40, 0x48, 0x40, 0x00,",
+		"ŀ":"0x00, 0x41, 0x7f, 0x40, 0x08, 0x00,",
+		"Ł":"0x00, 0x00, 0x00, 0x00, 0x00, 0x00,",
+		"ł":"0x00, 0x00, 0x00, 0x00, 0x00, 0x00,",
+		"Ń":"0x7c, 0x08, 0x12, 0x21, 0x7c, 0x00,",
+		"ń":"0x7c, 0x08, 0x06, 0x05, 0x78, 0x00,",
+		"Ņ":"0x1f, 0x42, 0x24, 0x08, 0x1f, 0x00,",
+		"ņ":"0x1f, 0x42, 0x21, 0x01, 0x1e, 0x00,",
+		"Ň":"0x7c, 0x09, 0x12, 0x21, 0x7c, 0x00,",
+		"ň":"0x7c, 0x09, 0x06, 0x05, 0x78, 0x00,",
+		"ʼn":"0x00, 0x00, 0x00, 0x00, 0x00, 0x00,",
+		"Ŋ":"0x00, 0x00, 0x00, 0x00, 0x00, 0x00,",
+		"ŋ":"0x00, 0x00, 0x00, 0x00, 0x00, 0x00,",
+		"Ō":"0x38, 0x45, 0x45, 0x45, 0x38, 0x00,",
+		"ō":"0x38, 0x45, 0x45, 0x45, 0x38, 0x00,",
+		"Ŏ":"0x38, 0x45, 0x46, 0x45, 0x38, 0x00,",
+		"ŏ":"0x38, 0x45, 0x46, 0x45, 0x38, 0x00,",
+		"Ő":"0x00, 0x00, 0x00, 0x00, 0x00, 0x00,",
+		"ő":"0x00, 0x00, 0x00, 0x00, 0x00, 0x00,",
+		"Œ":"0x3e, 0x41, 0x7f, 0x49, 0x49, 0x00,",
+		"œ":"0x38, 0x44, 0x7c, 0x54, 0x58, 0x00,",
+		"Ŕ":"0x7c, 0x14, 0x16, 0x15, 0x68, 0x00,",
+		"ŕ":"0x7c, 0x08, 0x06, 0x05, 0x08, 0x00,",
+		"Ŗ":"0x1f, 0x45, 0x25, 0x05, 0x1a, 0x00,",
+		"ŗ":"0x1f, 0x42, 0x21, 0x01, 0x02, 0x00,",
+		"Ř":"0x7c, 0x15, 0x16, 0x15, 0x68, 0x00,",
+		"ř":"0x7c, 0x09, 0x06, 0x05, 0x08, 0x00,",
+		"Ś":"0x08, 0x54, 0x56, 0x55, 0x20, 0x00,",
+		"ś":"0x48, 0x54, 0x56, 0x55, 0x24, 0x00,",
+		"Ŝ":"0x08, 0x56, 0x55, 0x56, 0x20, 0x00,",
+		"ŝ":"0x48, 0x56, 0x55, 0x56, 0x24, 0x00,",
+		"Ş":"0x02, 0x55, 0x35, 0x15, 0x08, 0x00,",
+		"ş":"0x12, 0x55, 0x35, 0x15, 0x09, 0x00,",
+		"Š":"0x08, 0x55, 0x56, 0x55, 0x20, 0x00,",
+		"š":"0x48, 0x55, 0x56, 0x55, 0x24, 0x00,",
+		"Ţ":"0x01, 0x41, 0x3f, 0x01, 0x01, 0x00,",
+		"ţ":"0x02, 0x4f, 0x32, 0x10, 0x08, 0x00,",
+		"Ť":"0x04, 0x05, 0x7e, 0x05, 0x04, 0x00,",
+		"ť":"0x00, 0x00, 0x00, 0x00, 0x00, 0x00,",
+		"Ŧ":"0x01, 0x09, 0x7f, 0x09, 0x01, 0x00,",
+		"ŧ":"0x14, 0x3e, 0x54, 0x40, 0x20, 0x00,",
+		"Ũ":"0x00, 0x00, 0x00, 0x00, 0x00, 0x00,",
+		"ũ":"0x00, 0x00, 0x00, 0x00, 0x00, 0x00,",
+		"Ū":"0x3c, 0x41, 0x41, 0x41, 0x3c, 0x00,",
+		"ū":"0x3c, 0x41, 0x41, 0x21, 0x7c, 0x00,",
+		"Ŭ":"0x3c, 0x41, 0x42, 0x41, 0x3c, 0x00,",
+		"ŭ":"0x3c, 0x41, 0x41, 0x21, 0x7c, 0x00,",
+		"Ů":"0x3c, 0x40, 0x41, 0x40, 0x3c, 0x00,",
+		"ů":"0x3c, 0x41, 0x41, 0x21, 0x7c, 0x00,",
+		"Ű":"0x00, 0x00, 0x00, 0x00, 0x00, 0x00,",
+		"ű":"0x00, 0x00, 0x00, 0x00, 0x00, 0x00,",
+		"Ų":"0x00, 0x00, 0x00, 0x00, 0x00, 0x00,",
+		"ų":"0x00, 0x00, 0x00, 0x00, 0x00, 0x00,",
+		"Ŵ":"0x3c, 0x42, 0x39, 0x42, 0x3c, 0x00,",
+		"ŵ":"0x3c, 0x42, 0x31, 0x42, 0x3c, 0x00,",
+		"Ŷ":"0x04, 0x0a, 0x71, 0x0a, 0x04, 0x00,",
+		"ŷ":"0x04, 0x4a, 0x31, 0x12, 0x0c, 0x00,",
+		"Ÿ":"0x04, 0x09, 0x70, 0x09, 0x04, 0x00,",
+		"Ź":"0x44, 0x64, 0x56, 0x4d, 0x44, 0x00,",
+		"ź":"0x44, 0x64, 0x56, 0x4d, 0x44, 0x00,",
+		"Ż":"0x44, 0x64, 0x55, 0x4c, 0x44, 0x00,",
+		"ż":"0x44, 0x64, 0x55, 0x4c, 0x44, 0x00,",
+		"Ž":"0x44, 0x65, 0x56, 0x4d, 0x44, 0x00,",
+		"ž":"0x44, 0x65, 0x56, 0x4d, 0x44, 0x00,",
+		"ſ":"0x00, 0x04, 0x7e, 0x01, 0x01, 0x00,",
+	}
+	return font

Translation Editor/make_translation.py

@@ -0,0 +1,507 @@
+#!/usr/bin/env python3
+#coding=utf-8
+from __future__ import print_function
+import json
+import os
+import io
+import sys
+import fontTables
+TRANSLATION_CPP = "Translation.cpp"
+
+try:
+    to_unicode = unicode
+except NameError:
+    to_unicode = str
+
+
+# Loading a single JSON file
+def loadJson(fileName, skipFirstLine):
+    with io.open(fileName, mode="r", encoding="utf-8") as f:
+        if skipFirstLine:
+            f.readline()
+
+        obj = json.loads(f.read())
+
+    return obj
+
+
+# Reading all language translations into a dictionary by langCode
+def readTranslations(jsonDir):
+    langDict = {}
+
+    # Read all translation files from the input dir
+    for fileName in os.listdir(jsonDir):
+
+        fileWithPath = os.path.join(jsonDir, fileName)
+        lf = fileName.lower()
+
+        # Read only translation_XX.json
+        if lf.startswith("translation_") and lf.endswith(".json"):
+            try:
+                lang = loadJson(fileWithPath, False)
+            except json.decoder.JSONDecodeError as e:
+                print("Failed to decode " + lf)
+                print(str(e))
+                sys.exit(2)
+
+            # Extract lang code from file name
+            langCode = fileName[12:-5].upper()
+            # ...and the one specified in the JSON file...
+            try:
+                langCodeFromJson = lang['languageCode']
+            except KeyError:
+                langCodeFromJson = "(missing)"
+
+            # ...cause they should be the same!
+            if langCode != langCodeFromJson:
+                raise ValueError("Invalid languageCode " + langCodeFromJson +
+                                 " in file " + fileName)
+
+            langDict[langCode] = lang
+
+    return langDict
+
+
+def writeStart(f):
+    f.write(
+        to_unicode(
+            """// WARNING: THIS FILE WAS AUTO GENERATED BY make_translation.py. PLEASE DO NOT EDIT.
+
+#include "Translation.h"
+#ifndef LANG
+#define LANG_EN
+#endif
+"""))
+
+
+def escapeC(s):
+    return s.replace("\"", "\\\"")
+
+
+def getConstants():
+    # Extra constants that are used in the firmware that are shared across all languages
+    consants =[]
+    consants.append(('SymbolPlus','+'))
+    consants.append(('SymbolMinus','-'))
+    consants.append(('SymbolSpace',' '))
+    consants.append(('SymbolDot','.'))
+    consants.append(('SymbolDegC','C'))
+    consants.append(('SymbolDegF','F'))
+    consants.append(('SymbolMinutes','M'))
+    consants.append(('SymbolSeconds','S'))
+    consants.append(('SymbolWatts','W'))
+    consants.append(('SymbolVolts','V'))
+    consants.append(('SymbolDC','DC'))
+    consants.append(('SymbolCellCount','S'))
+    consants.append(('SymbolVersionNumber','V2.06'))
+    return consants
+def getTipModelEnumTS80(): 
+    constants = []
+    constants.append("B02")
+    constants.append("D25")
+    constants.append("TS80") # end of miniware
+    constants.append("User") # User
+    return constants
+
+def getTipModelEnumTS100(): 
+    constants = []
+    constants.append("B02")
+    constants.append("D24")
+    constants.append("BC2")
+    constants.append(" C1")
+    constants.append("TS100")# end of miniware
+    constants.append("BC2")
+    constants.append("Hakko")# end of hakko
+    constants.append("User")
+    return constants
+
+def getDebugMenuHeaders(): 
+    constants = []
+    constants.append("DateHere")
+    constants.append("Heap: ")
+    constants.append("HWMG: ")
+    constants.append("HWMP: ")
+    constants.append("HWMM: ")
+    constants.append("Time: ")
+    constants.append("Move: ")
+    constants.append("RTip: ")
+    constants.append("CTip: ")
+    constants.append("Vin: ")
+    constants.append("THan: ")
+    constants.append("Model: ")
+    constants.append("Tres: ")
+    return constants
+
+
+def getLetterCounts(defs, lang):
+    textList = []
+    #iterate over all strings
+    obj = lang['menuOptions']
+    for mod in defs['menuOptions']:
+        eid = mod['id']
+        textList.append(obj[eid]['desc'])
+
+    obj = lang['messages']
+    for mod in defs['messages']:
+        eid = mod['id']
+        if eid not in obj:
+            textList.append(mod['default'])
+        else:
+            textList.append(obj[eid])
+
+    obj = lang['characters']
+
+    for mod in defs['characters']:
+        eid = mod['id']
+        textList.append(obj[eid])
+
+    obj = lang['menuOptions']
+    for mod in defs['menuOptions']:
+        eid = mod['id']
+        if lang['menuDouble']:
+            textList.append(obj[eid]['text2'][0])
+            textList.append(obj[eid]['text2'][1])
+        else:
+            textList.append(obj[eid]['text'])
+
+    obj = lang['menuGroups']
+    for mod in defs['menuGroups']:
+        eid = mod['id']
+        textList.append(obj[eid]['text2'][0])
+        textList.append(obj[eid]['text2'][1])
+
+    obj = lang['menuGroups']
+    for mod in defs['menuGroups']:
+        eid = mod['id']
+        textList.append(obj[eid]['desc'])
+    constants = getConstants()  
+    for x in constants:
+        textList.append(x[1])
+    textList.extend(getDebugMenuHeaders())
+    textList.extend(getTipModelEnumTS100())
+    textList.extend(getTipModelEnumTS80())  
+        
+    # collapse all strings down into the composite letters and store totals for these
+
+    symbolCounts = {}
+    for line in textList:
+        line = line.replace('\n', '').replace('\r', '')
+        line = line.replace('\\n', '').replace('\\r', '')
+        if len(line):
+            #print(line)
+            for letter in line:
+                symbolCounts[letter] = symbolCounts.get(letter, 0) + 1
+    symbolCounts = sorted(
+        symbolCounts.items(),
+        key=lambda kv: kv[1])  # swap to Big -> little sort order
+    symbolCounts = list(map(lambda x: x[0], symbolCounts))
+    symbolCounts.reverse()
+    return symbolCounts
+
+    
+
+def getFontMapAndTable(textList):
+    # the text list is sorted
+    # allocate out these in their order as number codes
+    symbolMap = {}
+    symbolMap['\n'] = '\\x01'
+    index = 2  # start at 2, as 0= null terminator,1 = new line
+    forcedFirstSymbols = ['0', '1', '2', '3', '4', '5', '6', '7', '8', '9']
+    #enforce numbers are first
+    for sym in forcedFirstSymbols:
+        symbolMap[sym] = "\\x%0.2X" % index
+        index = index + 1
+    if len(textList) > (253 - len(forcedFirstSymbols)):
+        print('Error, too many used symbols for this version')
+        exit(1)
+    print('Generating fonts for {} symbols'.format(len(textList)))
+
+    for sym in textList:
+        if sym not in symbolMap:
+            symbolMap[sym] = "\\x%0.2X" % index
+            index = index + 1
+    # Get the font table
+    fontTableStrings = []
+    fontSmallTableStrings = []
+    fontTable = fontTables.getFontMap()
+    fontSmallTable = fontTables.getSmallFontMap()
+    for sym in forcedFirstSymbols:
+        if sym not in fontTable:
+            print('Missing Large font element for {}'.format(sym))
+            exit(1)
+        fontLine = fontTable[sym]
+        fontTableStrings.append(fontLine + "//{} -> {}".format(symbolMap[sym],sym))
+        if sym not in fontSmallTable:
+            print('Missing Small font element for {}'.format(sym))
+            exit(1)
+        fontLine = fontSmallTable[sym]
+        fontSmallTableStrings.append(fontLine + "//{} -> {}".format(symbolMap[sym],sym))
+
+    for sym in textList:
+        if sym not in fontTable:
+            print('Missing Large font element for {}'.format(sym))
+            exit(1)
+        if sym not in forcedFirstSymbols:
+            fontLine = fontTable[sym]
+            fontTableStrings.append(fontLine + "//{} -> {}".format(symbolMap[sym],sym))
+            if sym not in fontSmallTable:
+                print('Missing Small font element for {}'.format(sym))
+                exit(1)
+            fontLine = fontSmallTable[sym]
+            fontSmallTableStrings.append(fontLine + "//{} -> {}".format(symbolMap[sym],sym))
+    outputTable = "const uint8_t USER_FONT_12[] = {" + to_unicode("\n")
+    for line in fontTableStrings:
+        # join font table int one large string
+        outputTable = outputTable + line + to_unicode("\n")
+    outputTable = outputTable + "};" + to_unicode("\n")
+    outputTable = outputTable + "const uint8_t USER_FONT_6x8[] = {" + to_unicode(
+        "\n")
+    for line in fontSmallTableStrings:
+        # join font table int one large string
+        outputTable = outputTable + line + to_unicode("\n")
+    outputTable = outputTable + "};" + to_unicode("\n")
+    return (outputTable, symbolMap)
+
+
+def convStr(symbolConversionTable, text):
+    # convert all of the symbols from the string into escapes for their content
+    outputString = ""
+    for c in text.replace('\\r', '').replace('\\n','\n'):
+        if c not in symbolConversionTable:
+            print('Missing font definition for {}'.format(c))
+        else:
+            outputString = outputString + symbolConversionTable[c]
+    return outputString
+
+
+def writeLanguage(languageCode, defs, f):
+    print("Generating block for " + languageCode)
+    lang = langDict[languageCode]
+    #Iterate over all of the text to build up the symbols & counts
+    textList = getLetterCounts(defs, lang)
+    # From the letter counts, need to make a symbol translator & write out the font
+    (fontTableText, symbolConversionTable) = getFontMapAndTable(textList)
+
+    f.write(to_unicode("\n#ifdef LANG_" + languageCode + "\n"))
+    f.write(fontTableText)
+    try:
+        langName = lang['languageLocalName']
+    except KeyError:
+        langName = languageCode
+
+    f.write(to_unicode("// ---- " + langName + " ----\n\n"))
+
+
+    # ----- Writing SettingsDescriptions
+    obj = lang['menuOptions']
+    f.write(to_unicode("const char* SettingsDescriptions[] = {\n"))
+
+    maxLen = 25
+    for mod in defs['menuOptions']:
+        eid = mod['id']
+        if 'feature' in mod:
+            f.write(to_unicode("#ifdef " + mod['feature'] + "\n"))
+        f.write(to_unicode("  /* " + eid.ljust(maxLen)[:maxLen] + " */ "))
+        f.write(
+            to_unicode("\"" +
+                       convStr(symbolConversionTable, (obj[eid]['desc'])) +
+                       "\"," + "//{} \n".format(obj[eid]['desc'])))
+        if 'feature' in mod:
+            f.write(to_unicode("#endif\n"))
+
+    f.write(to_unicode("};\n\n"))
+
+    # ----- Writing Message strings
+
+    obj = lang['messages']
+
+    for mod in defs['messages']:
+        eid = mod['id']
+        if eid not in obj:
+            f.write(
+            to_unicode("const char* " + eid + " = \"" +
+                       convStr(symbolConversionTable, (mod['default'])) + "\";"+ "//{} \n".format(mod['default'])))
+        else:
+            f.write(
+                to_unicode("const char* " + eid + " = \"" +
+                        convStr(symbolConversionTable, (obj[eid])) + "\";"+ "//{} \n".format(obj[eid])))
+
+    f.write(to_unicode("\n"))
+
+    # ----- Writing Characters
+
+    obj = lang['characters']
+
+    for mod in defs['characters']:
+        eid = mod['id']
+        f.write(
+            to_unicode("const char* " + eid + " = \"" +
+                       convStr(symbolConversionTable, obj[eid]) + "\";"+ "//{} \n".format(obj[eid])))
+
+    f.write(to_unicode("\n"))
+
+    # Write out firmware constant options
+    constants = getConstants()
+    for x in constants:
+        f.write(
+            to_unicode("const char* " + x[0] + " = \"" +
+                       convStr(symbolConversionTable, x[1]) + "\";"+ "//{} \n".format(x[1])))
+
+    f.write(to_unicode("\n"))
+    # Write out tip model strings
+
+    f.write(to_unicode("const char* TipModelStrings[] = {\n"))
+    f.write(to_unicode("#ifdef MODEL_TS100\n"))
+    for c in getTipModelEnumTS100():
+        f.write(to_unicode("\t \"" + convStr(symbolConversionTable, c) + "\","+ "//{} \n".format(c)))
+    f.write(to_unicode("#else\n"))
+    for c in getTipModelEnumTS80():
+        f.write(to_unicode("\t \"" +  convStr(symbolConversionTable, c)  + "\","+ "//{} \n".format(c)))
+    f.write(to_unicode("#endif\n"))
+
+    f.write(to_unicode("};\n\n"))
+    
+    # -- Debugging Menu
+
+    
+
+    f.write(to_unicode("const char* DebugMenu[] = {\n"))
+    for c in getDebugMenuHeaders():
+        f.write(to_unicode("\t \"" + convStr(symbolConversionTable, c) + "\","+ "//{} \n".format(c)))
+    f.write(to_unicode("};\n\n"))
+    
+    # ----- Menu Options
+
+    # Menu type
+    f.write(
+        to_unicode(
+            "const enum ShortNameType SettingsShortNameType = SHORT_NAME_" +
+            ("DOUBLE" if lang['menuDouble'] else "SINGLE") + "_LINE;\n"))
+
+    # ----- Writing SettingsDescriptions
+    obj = lang['menuOptions']
+    f.write(to_unicode("const char* SettingsShortNames[][2] = {\n"))
+
+    maxLen = 25
+    for mod in defs['menuOptions']:
+        eid = mod['id']
+        if 'feature' in mod:
+            f.write(to_unicode("#ifdef " + mod['feature'] + "\n"))
+        f.write(to_unicode("  /* " + eid.ljust(maxLen)[:maxLen] + " */ "))
+        if lang['menuDouble']:
+            f.write(
+                to_unicode(
+                    "{ \"" +
+                    convStr(symbolConversionTable, (obj[eid]['text2'][0])) +
+                    "\", \"" +
+                    convStr(symbolConversionTable, (obj[eid]['text2'][1])) +
+                    "\" },"+ "//{} \n".format(obj[eid]['text2'])))
+        else:
+            f.write(
+                to_unicode("{ \"" +
+                           convStr(symbolConversionTable, (obj[eid]['text'])) +
+                           "\" },"+ "//{} \n".format(obj[eid]['text'])))
+        if 'feature' in mod:
+            f.write(to_unicode("#endif\n"))
+
+    f.write(to_unicode("};\n\n"))
+
+    # ----- Writing Menu Groups
+    obj = lang['menuGroups']
+    f.write(
+        to_unicode("const char* SettingsMenuEntries[" + str(len(obj)) +
+                   "] = {\n"))
+
+    maxLen = 25
+    for mod in defs['menuGroups']:
+        eid = mod['id']
+        f.write(to_unicode("  /* " + eid.ljust(maxLen)[:maxLen] + " */ "))
+        f.write(
+            to_unicode("\"" +
+                       convStr(symbolConversionTable, (obj[eid]['text2'][0]) +
+                               "\\n" + obj[eid]['text2'][1]) + "\","+ "//{} \n".format(obj[eid]['text2'])))
+
+    f.write(to_unicode("};\n\n"))
+
+    # ----- Writing Menu Groups Descriptions
+    obj = lang['menuGroups']
+    f.write(
+        to_unicode("const char* SettingsMenuEntriesDescriptions[" +
+                   str(len(obj)) + "] = {\n"))
+
+    maxLen = 25
+    for mod in defs['menuGroups']:
+        eid = mod['id']
+        f.write(to_unicode("  /* " + eid.ljust(maxLen)[:maxLen] + " */ "))
+        f.write(
+            to_unicode("\"" +
+                       convStr(symbolConversionTable, (obj[eid]['desc'])) +
+                       "\","+ "//{} \n".format(obj[eid]['desc'])))
+
+    f.write(to_unicode("};\n\n"))
+
+    # ----- Block end
+    f.write(to_unicode("#endif\n"))
+
+
+def read_opts():
+    """ Reading input parameters
+    First parameter = json directory
+    Second parameter = target directory
+    """
+    if len(sys.argv) > 1:
+        jsonDir = sys.argv[1]
+    else:
+        jsonDir = "."
+
+    if len(sys.argv) > 2:
+        outFile = sys.argv[2]
+    else:
+        outDir = os.path.relpath(jsonDir + "/../workspace/TS100/src/")
+        outFile = os.path.join(outDir, TRANSLATION_CPP)
+
+    if len(sys.argv) > 3:
+        raise Exception("Too many parameters!")
+
+    return jsonDir, outFile
+
+
+def orderOutput(langDict):
+    # These languages go first
+    mandatoryOrder = ['EN']
+
+    # Then add all others in alphabetical order
+    sortedKeys = sorted(langDict.keys())
+
+    # Add the rest as they come
+    for key in sortedKeys:
+        if key not in mandatoryOrder:
+            mandatoryOrder.append(key)
+
+    return mandatoryOrder
+
+
+def writeTarget(outFile, defs, langCodes):
+    # Start writing the file
+    with io.open(outFile, 'w', encoding='utf-8', newline="\n") as f:
+        writeStart(f)
+
+        for langCode in langCodes:
+            writeLanguage(langCode, defs, f)
+
+
+if __name__ == "__main__":
+    try:
+        jsonDir, outFile = read_opts()
+    except:
+        print("usage: make_translation.py {json dir} {cpp dir}")
+        sys.exit(1)
+
+    print("Making " + outFile + " from " + jsonDir)
+
+    langDict = readTranslations(jsonDir)
+    defs = loadJson(os.path.join(jsonDir, "translations_def.js"), True)
+    langCodes = orderOutput(langDict)
+    writeTarget(outFile, defs, langCodes)
+
+    print("Done")

Translation Editor/translation_bg.json

@@ -0,0 +1,234 @@
+{
+	"languageCode": "BG",
+	"languageLocalName": "Български",
+	"cyrillicGlyphs": true,
+	"messages": {
+		"SettingsCalibrationDone": "Calibration done!",
+		"SettingsCalibrationWarning": "Уверете се, че човката на поялника е със стайна температура преди да продължите!",
+		"SettingsResetWarning": "Сигурни ли сте, че искате да върнете фабричните настройки?",
+		"UVLOWarningString": "Ниско V!",
+		"UndervoltageString": "Ниско Напрежение",
+		"InputVoltageString": "Входно V: ",
+		"WarningTipTempString": "Темп.: ",
+		"BadTipString": "ЛОШ ВРЪХ",
+		"SleepingSimpleString": "Сън",
+		"SleepingAdvancedString": "Хър Хър Хър...",
+		"WarningSimpleString": "ОХ!",
+		"WarningAdvancedString": "ВНИМАНИЕ! ТОПЛО!",
+		"SleepingTipAdvancedString": "Връх:",
+		"IdleTipString": "Връх:",
+		"IdleSetString": " Set:",
+		"TipDisconnectedString": "ВРЪХ ЛОША ВРЪЗКА",
+		"SolderingAdvancedPowerPrompt": "Захранване: ",
+		"OffString": "Off",
+		"ResetOKMessage":"Reset OK"
+	},
+	"characters": {
+		"SettingRightChar": "R",
+		"SettingLeftChar": "L",
+		"SettingAutoChar": "A",
+		"SettingFastChar": "F",
+		"SettingSlowChar": "S"
+	},
+	"menuDouble": true,
+	"menuGroups": {
+		"SolderingMenu": {
+			"text2": [
+				"Поялник",
+				"Настройки"
+			],
+			"desc": "Настройки на поялника"
+		},
+		"PowerSavingMenu": {
+			"text2": [
+				"Режими",
+				"Настройки"
+			],
+			"desc": "Настройки енергоспестяване"
+		},
+		"UIMenu": {
+			"text2": [
+				"Интерфейс",
+				"Настройки"
+			],
+			"desc": "Настройки на интерфейса"
+		},
+		"AdvancedMenu": {
+			"text2": [
+				"Разширени",
+				"Настройки"
+			],
+			"desc": "Допълнителни настройки"
+		}
+	},
+	"menuOptions": {
+		"PowerSource": {
+			"text": "",
+			"text2": [
+				"Източник",
+				"захранване"
+			],
+			"desc": "Източник на захранване. Минимално напрежение. <DC 10V> <S 3.3V за клетка>"
+		},
+		"SleepTemperature": {
+			"text": "",
+			"text2": [
+				"Темп.",
+				"сън"
+			],
+			"desc": "Температура при режим \"сън\" <C>"
+		},
+		"SleepTimeout": {
+			"text": "",
+			"text2": [
+				"Време",
+				"сън"
+			],
+			"desc": "Включване в режим \"сън\" след: <Минути/Секунди>"
+		},
+		"ShutdownTimeout": {
+			"text": "",
+			"text2": [
+				"Време",
+				"изкл."
+			],
+			"desc": "Изключване след <Минути>"
+		},
+		"MotionSensitivity": {
+			"text": "",
+			"text2": [
+				"Усещане",
+				"за движение"
+			],
+			"desc": "Усещане за движение <0.Изключено 1.Слабо 9.Силно>"
+		},
+		"TemperatureUnit": {
+			"text": "",
+			"text2": [
+				"Единици за",
+				"температура"
+			],
+			"desc": "Единици за температура <C=Целзии F=Фаренхайт>"
+		},
+		"AdvancedIdle": {
+			"text": "",
+			"text2": [
+				"Детайлен",
+				"екран в покой"
+			],
+			"desc": "Покажи детайлна информация със ситен шрифт на екрана в режим на покой."
+		},
+		"DisplayRotation": {
+			"text": "",
+			"text2": [
+				"Ориентация",
+				"на дисплея"
+			],
+			"desc": "Ориентация на дисплея <A. Автоматично L. Лява Ръка R. Дясна Ръка>"
+		},
+		"BoostEnabled": {
+			"text": "",
+			"text2": [
+				"Турбо режим",
+				"пуснат"
+			],
+			"desc": "Ползвай предния бутон за \"турбо\" режим с температура до 450C при запояване"
+		},
+		"BoostTemperature": {
+			"text": "",
+			"text2": [
+				"Турбо",
+				"темп."
+			],
+			"desc": "Температура за \"турбо\" режим"
+		},
+		"AutoStart": {
+			"text": "",
+			"text2": [
+				"Автоматичен",
+				"работен режим"
+			],
+			"desc": "Режим на поялника при включване на захранването. T=Работен, S=Сън, F=Изключен"
+		},
+		"CooldownBlink": {
+			"text": "",
+			"text2": [
+				"Мигай при",
+				"топъл поялник"
+			],
+			"desc": "След изключване от работен режим, индикатора за температура да мига докато човката на поялника все още е топла"
+		},
+		"TemperatureCalibration": {
+			"text": "",
+			"text2": [
+				"Калибриране",
+				"температура?"
+			],
+			"desc": "Калибриране на температурата"
+		},
+		"SettingsReset": {
+			"text": "",
+			"text2": [
+				"Фабрични",
+				"настройки?"
+			],
+			"desc": "Връщане на фабрични настройки"
+		},
+		"VoltageCalibration": {
+			"text": "",
+			"text2": [
+				"Калибриране",
+				"напрежение?"
+			],
+			"desc": "Калибриране на входното напрежение (VIN). Задръжте бутонa за изход"
+		},
+		"AdvancedSoldering": {
+			"text": "",
+			"text2": [
+				"Детайлен",
+				"работен екран"
+			],
+			"desc": "Детайлна информация в работен режим при запояване"
+		},
+		"ScrollingSpeed": {
+			"text": "",
+			"text2": [
+				"Скорост",
+				"на текста"
+			],
+			"desc": "Скорост на движение на този текст"
+		},
+		"TipModel": {
+			"text": "TIPMO",
+			"text2": [
+				"Tip",
+				"Model"
+			],
+			"desc": "Tip Model selection"
+		},
+		"SimpleCalibrationMode": {
+			"text": "SMPCAL",
+			"text2": [
+				"Simple",
+				"Calibration"
+			],
+			"desc": "Simple Calibration using Hot water"
+		},
+		"AdvancedCalibrationMode": {
+			"text": "ADVCAL",
+			"text2": [
+				"Advanced",
+				"Calibration"
+			],
+			"desc": "Advanced calibration using thermocouple on the tip"
+		},
+		"PowerInput": {
+			"text": "PWRW",
+			"text2": [
+				"Power",
+				"Wattage"
+			],
+			"desc": "Power Wattage of the power adapter used"
+		}
+	}
+}

Translation Editor/translation_cs.json

@@ -0,0 +1,234 @@
+{
+	"languageCode": "CS",
+	"languageLocalName": "Český",
+	"cyrillicGlyphs": false,
+	"messages": {
+		"SettingsCalibrationDone": "Calibration done!",
+		"SettingsCalibrationWarning": "Ujistěte se, že hrot má pokojovou teplotu!",
+		"SettingsResetWarning": "Opravdu chcete resetovat zařízení do továrního nastavení?",
+		"UVLOWarningString": "DC LOW",
+		"UndervoltageString": "! Nízké napětí !",
+		"InputVoltageString": "Napětí: ",
+		"WarningTipTempString": "Teplota: ",
+		"BadTipString": "BAD TIP",
+		"SleepingSimpleString": "Zzz ",
+		"SleepingAdvancedString": "Režim spánku...",
+		"WarningSimpleString": "HOT!",
+		"WarningAdvancedString": "!! HORKÝ HROT !!",
+		"SleepingTipAdvancedString": "Hrot:",
+		"IdleTipString": "Hrot:",
+		"IdleSetString": " Cíl:",
+		"TipDisconnectedString": "HROT NEPŘIPOJEN",
+		"SolderingAdvancedPowerPrompt": "Ohřev: ",
+		"OffString": "Off",
+		"ResetOKMessage":"Reset OK"
+	},
+	"characters": {
+		"SettingRightChar": "P",
+		"SettingLeftChar": "L",
+		"SettingAutoChar": "A",
+		"SettingFastChar": "R",
+		"SettingSlowChar": "P"
+	},
+	"menuDouble": true,
+	"menuGroups": {
+		"SolderingMenu": {
+			"text2": [
+				"Pájecí",
+				"nastavení"
+			],
+			"desc": "Nastavení pájení (boost, auto start...)"
+		},
+		"PowerSavingMenu": {
+			"text2": [
+				"Režim",
+				"spánku"
+			],
+			"desc": "Nastavení režimu spánku, automatického vypnutí..."
+		},
+		"UIMenu": {
+			"text2": [
+				"Uživatelské",
+				"rozhraní"
+			],
+			"desc": "Nastavení uživatelského rozhraní."
+		},
+		"AdvancedMenu": {
+			"text2": [
+				"Pokročilé",
+				"volby"
+			],
+			"desc": "Pokročilé volby (detailní obrazovky, kalibrace, tovární nastavení...)"
+		}
+	},
+	"menuOptions": {
+		"PowerSource": {
+			"text": "",
+			"text2": [
+				"Zdroj",
+				"napájení"
+			],
+			"desc": "Při nižším napětí ukončí pájení <DC=10V, ?S=?x3.3V pro LiPo,LiIon...>"
+		},
+		"SleepTemperature": {
+			"text": "",
+			"text2": [
+				"Teplota v",
+				"r. spánku"
+			],
+			"desc": "Teplota v režimu spánku."
+		},
+		"SleepTimeout": {
+			"text": "",
+			"text2": [
+				"Čas do",
+				"r. spánku"
+			],
+			"desc": "Čas do režimu spánku <Minut/Sekund>"
+		},
+		"ShutdownTimeout": {
+			"text": "",
+			"text2": [
+				"Čas do",
+				"vypnutí"
+			],
+			"desc": "Čas do automatického vypnutí <Minut>"
+		},
+		"MotionSensitivity": {
+			"text": "",
+			"text2": [
+				"Citlivost",
+				"det. pohybu"
+			],
+			"desc": "Citlivost detekce pohybu <0=Vyp, 1=Min, ... 9=Max>"
+		},
+		"TemperatureUnit": {
+			"text": "",
+			"text2": [
+				"Jednotky",
+				"teploty"
+			],
+			"desc": "Jednotky měření teploty <C=Celsius, F=Fahrenheit>"
+		},
+		"AdvancedIdle": {
+			"text": "",
+			"text2": [
+				"Podrobnosti",
+				"na vých. obr."
+			],
+			"desc": "Zobrazit podrobnosti na výchozí obrazovce?"
+		},
+		"DisplayRotation": {
+			"text": "",
+			"text2": [
+				"Orientace",
+				"obrazovky"
+			],
+			"desc": "Orientace obrazovky <A=Auto, L=Levák, P=Pravák>"
+		},
+		"BoostEnabled": {
+			"text": "",
+			"text2": [
+				"Povolit",
+				"boost"
+			],
+			"desc": "Povolit boost držením předního tlačítka při pájení?"
+		},
+		"BoostTemperature": {
+			"text": "",
+			"text2": [
+				"Teplota v",
+				"r. boost"
+			],
+			"desc": "Teplota v režimu boost."
+		},
+		"AutoStart": {
+			"text": "",
+			"text2": [
+				"Auto",
+				"start"
+			],
+			"desc": "Při startu ihned nahřát hrot?"
+		},
+		"CooldownBlink": {
+			"text": "",
+			"text2": [
+				"Blikáni při",
+				"chladnutí"
+			],
+			"desc": "Blikání teploty při chladnutí, dokud je hrot horký?"
+		},
+		"TemperatureCalibration": {
+			"text": "",
+			"text2": [
+				"Kalibrovat",
+				"teplotu?"
+			],
+			"desc": "Kalibrace měření teploty."
+		},
+		"SettingsReset": {
+			"text": "",
+			"text2": [
+				"Tovární",
+				"nastavení?"
+			],
+			"desc": "Obnovení továrního nastavení."
+		},
+		"VoltageCalibration": {
+			"text": "",
+			"text2": [
+				"Kalibrovat",
+				"vstupní napětí?"
+			],
+			"desc": "Kalibrace vstupního napětí. Tlačítky uprav, podržením potvrď."
+		},
+		"AdvancedSoldering": {
+			"text": "",
+			"text2": [
+				"Podrobnosti",
+				"při pájení"
+			],
+			"desc": "Zobrazit podrobnosti při pájení?"
+		},
+		"ScrollingSpeed": {
+			"text": "",
+			"text2": [
+				"Rychlost",
+				"popisků"
+			],
+			"desc": "Rychlost skrolování popisků podobných tomuto <P=Pomalu,R=Rychle>"
+		},
+		"TipModel": {
+			"text": "TIPMO",
+			"text2": [
+				"Tip",
+				"Model"
+			],
+			"desc": "Tip Model selection"
+		},
+		"SimpleCalibrationMode": {
+			"text": "SMPCAL",
+			"text2": [
+				"Simple",
+				"Calibration"
+			],
+			"desc": "Simple Calibration using Hot water"
+		},
+		"AdvancedCalibrationMode": {
+			"text": "ADVCAL",
+			"text2": [
+				"Advanced",
+				"Calibration"
+			],
+			"desc": "Advanced calibration using thermocouple on the tip"
+		},
+		"PowerInput": {
+			"text": "PWRW",
+			"text2": [
+				"Power",
+				"Wattage"
+			],
+			"desc": "Power Wattage of the power adapter used"
+		}
+	}
+}

Translation Editor/translation_da.json

@@ -0,0 +1,234 @@
+{
+	"languageCode": "DA",
+	"languageLocalName": "Dansk",
+	"cyrillicGlyphs": false,
+	"messages": {
+		"SettingsCalibrationDone": "Calibration done!",
+		"SettingsCalibrationWarning": "Sørg for at loddespidsen er ved stuetemperatur, inden du fortsætter!",
+		"SettingsResetWarning": "Are you sure to reset settings to default values?",
+		"UVLOWarningString": "Lav Volt",
+		"UndervoltageString": "Undervoltage",
+		"InputVoltageString": "Input V: ",
+		"WarningTipTempString": "Tip Temp: ",
+		"BadTipString": "BAD TIP",
+		"SleepingSimpleString": "Zzzz",
+		"SleepingAdvancedString": "Dvale...",
+		"WarningSimpleString": "Varm",
+		"WarningAdvancedString": "VARM LODDESPIDS!",
+		"SleepingTipAdvancedString": "Tip:",
+		"IdleTipString": "Tip:",
+		"IdleSetString": " Set:",
+		"TipDisconnectedString": "TIP DISCONNECTED",
+		"SolderingAdvancedPowerPrompt": "Power: ",
+		"OffString": "Off",
+		"ResetOKMessage":"Reset OK"
+	},
+	"characters": {
+		"SettingRightChar": "H",
+		"SettingLeftChar": "V",
+		"SettingAutoChar": "A",
+		"SettingFastChar": "F",
+		"SettingSlowChar": "S"
+	},
+	"menuDouble": false,
+	"menuGroups": {
+		"SolderingMenu": {
+			"text2": [
+				"Soldering",
+				"Settings"
+			],
+			"desc": "Soldering settings"
+		},
+		"PowerSavingMenu": {
+			"text2": [
+				"Sleep",
+				"Modes"
+			],
+			"desc": "Power Saving Settings"
+		},
+		"UIMenu": {
+			"text2": [
+				"User",
+				"Interface"
+			],
+			"desc": "User Interface settings"
+		},
+		"AdvancedMenu": {
+			"text2": [
+				"Advanced",
+				"Options"
+			],
+			"desc": "Advanced options"
+		}
+	},
+	"menuOptions": {
+		"PowerSource": {
+			"text": "PWRSC",
+			"text2": [
+				"",
+				""
+			],
+			"desc": "Strømforsyning. Indstil Cutoff Spændingen. <DC 10V <S 3.3V per cell"
+		},
+		"SleepTemperature": {
+			"text": "STMP",
+			"text2": [
+				"",
+				""
+			],
+			"desc": "Dvale Temperatur <C"
+		},
+		"SleepTimeout": {
+			"text": "STME",
+			"text2": [
+				"",
+				""
+			],
+			"desc": "Dvale Timeout <Minutter/Sekunder"
+		},
+		"ShutdownTimeout": {
+			"text": "SHTME",
+			"text2": [
+				"",
+				""
+			],
+			"desc": "sluknings Timeout <Minutter"
+		},
+		"MotionSensitivity": {
+			"text": "MSENSE",
+			"text2": [
+				"",
+				""
+			],
+			"desc": "Bevægelsesfølsomhed <0.Slukket 1.Mindst følsom 9.Mest følsom"
+		},
+		"TemperatureUnit": {
+			"text": "TMPUNT",
+			"text2": [
+				"",
+				""
+			],
+			"desc": "Temperatur Enhed <C=Celsius F=Fahrenheit"
+		},
+		"AdvancedIdle": {
+			"text": "ADVIDL",
+			"text2": [
+				"",
+				""
+			],
+			"desc": "Vis detialieret information med en mindre skriftstørrelse på standby skærmen."
+		},
+		"DisplayRotation": {
+			"text": "DSPROT",
+			"text2": [
+				"",
+				""
+			],
+			"desc": "Skærm Orientering <A. Automatisk V. Venstre Håndet H. Højre Håndet"
+		},
+		"BoostEnabled": {
+			"text": "BOOST",
+			"text2": [
+				"",
+				""
+			],
+			"desc": "Ved tryk på front knap Aktiveres boost-funktionen, 450C tilstand når der loddes"
+		},
+		"BoostTemperature": {
+			"text": "BTMP",
+			"text2": [
+				"",
+				""
+			],
+			"desc": "Temperatur i \"boost\" mode"
+		},
+		"AutoStart": {
+			"text": "ASTART",
+			"text2": [
+				"",
+				""
+			],
+			"desc": "Start automatisk med lodning når strøm sættes til. L=Lodning, D= Dvale tilstand,S=Slukket"
+		},
+		"CooldownBlink": {
+			"text": "CLBLNK",
+			"text2": [
+				"",
+				""
+			],
+			"desc": "Blink temperaturen på skærmen, mens spidsen stadig er varm."
+		},
+		"TemperatureCalibration": {
+			"text": "TMP CAL?",
+			"text2": [
+				"",
+				""
+			],
+			"desc": "kalibrere spids temperatur."
+		},
+		"SettingsReset": {
+			"text": "RESET?",
+			"text2": [
+				"",
+				""
+			],
+			"desc": "Gendan alle indstillinger"
+		},
+		"VoltageCalibration": {
+			"text": "CAL VIN?",
+			"text2": [
+				"",
+				""
+			],
+			"desc": "VIN kalibrering. Knapperne justere, Lang tryk for at gå ud"
+		},
+		"AdvancedSoldering": {
+			"text": "ADVSLD",
+			"text2": [
+				"",
+				""
+			],
+			"desc": "Vis detialieret information mens der loddes"
+		},
+		"ScrollingSpeed": {
+			"text": "DESCSP",
+			"text2": [
+				"",
+				""
+			],
+			"desc": "Speed this text scrolls past at"
+		},
+		"TipModel": {
+			"text": "TIPMO",
+			"text2": [
+				"Tip",
+				"Model"
+			],
+			"desc": "Tip Model selection"
+		},
+		"SimpleCalibrationMode": {
+			"text": "SMPCAL",
+			"text2": [
+				"Simple",
+				"Calibration"
+			],
+			"desc": "Simple Calibration using Hot water"
+		},
+		"AdvancedCalibrationMode": {
+			"text": "ADVCAL",
+			"text2": [
+				"Advanced",
+				"Calibration"
+			],
+			"desc": "Advanced calibration using thermocouple on the tip"
+		},
+		"PowerInput": {
+			"text": "PWRW",
+			"text2": [
+				"Power",
+				"Wattage"
+			],
+			"desc": "Power Wattage of the power adapter used"
+		}
+	}
+}

Translation Editor/translation_de.json

@@ -0,0 +1,234 @@
+{
+	"languageCode": "DE",
+	"languageLocalName": "Deutsch",
+	"cyrillicGlyphs": false,
+	"messages": {
+		"SettingsCalibrationDone": "Kalibrierung abgeschlossen!",
+		"SettingsCalibrationWarning": "Vor dem Fortfahren muss die Lötspitze vollständig abgekühlt sein!",
+		"SettingsResetWarning": "Sind Sie sicher, dass Sie alle Werte zurücksetzen wollen?",
+		"UVLOWarningString": "V niedr.",
+		"UndervoltageString": "Unterspannung",
+		"InputVoltageString": "V Eingang: ",
+		"WarningTipTempString": "Temperatur: ",
+		"BadTipString": "DEFEKT",
+		"SleepingSimpleString": "Zzz ",
+		"SleepingAdvancedString": "Ruhemodus...",
+		"WarningSimpleString": "HEIß",
+		"WarningAdvancedString": "! Achtung Heiß !",
+		"SleepingTipAdvancedString": "Temp:",
+		"IdleTipString": "Ist:",
+		"IdleSetString": " Soll:",
+		"TipDisconnectedString": "Spitze fehlt",
+		"SolderingAdvancedPowerPrompt": "Leistung: ",
+		"OffString": "Aus",
+		"ResetOKMessage":"Reset OK"
+	},
+	"characters": {
+		"SettingRightChar": "R",
+		"SettingLeftChar": "L",
+		"SettingAutoChar": "A",
+		"SettingFastChar": "F",
+		"SettingSlowChar": "S"
+	},
+	"menuDouble": true,
+	"menuGroups": {
+		"SolderingMenu": {
+			"text2": [
+				"Löt-",
+				"einstellungen"
+			],
+			"desc": "Löteinstellungen"
+		},
+		"PowerSavingMenu": {
+			"text2": [
+				"Schlaf-",
+				"modus"
+			],
+			"desc": "Energiespareinstellungen"
+		},
+		"UIMenu": {
+			"text2": [
+				"Menü-",
+				"einstellungen"
+			],
+			"desc": "Menüeinstellungen"
+		},
+		"AdvancedMenu": {
+			"text2": [
+				"Erweiterte",
+				"Einstellungen"
+			],
+			"desc": "Erweiterte Einstellungen"
+		}
+	},
+	"menuOptions": {
+		"PowerSource": {
+			"text": "",
+			"text2": [
+				"Spannungs-",
+				"quelle"
+			],
+			"desc": "Spannungsquelle (Abschaltspannung) <DC=10V, nS=n*3.3V für n LiIon-Zellen>"
+		},
+		"SleepTemperature": {
+			"text": "",
+			"text2": [
+				"Ruhetemp-",
+				"eratur"
+			],
+			"desc": "Ruhetemperatur (In der eingestellten Einheit)"
+		},
+		"SleepTimeout": {
+			"text": "",
+			"text2": [
+				"Ruhever-",
+				"zögerung"
+			],
+			"desc": "Ruhemodus nach <Sekunden/Minuten>"
+		},
+		"ShutdownTimeout": {
+			"text": "",
+			"text2": [
+				"Abschalt-",
+				"zeit"
+			],
+			"desc": "Abschalten nach <Minuten>"
+		},
+		"MotionSensitivity": {
+			"text": "",
+			"text2": [
+				"Bewegungs-",
+				"empfindlichk."
+			],
+			"desc": "Bewegungsempfindlichkeit <0=Aus, 1=Minimal ... 9=Maximal>"
+		},
+		"TemperatureUnit": {
+			"text": "",
+			"text2": [
+				"Temperatur-",
+				"einheit"
+			],
+			"desc": "Temperatureinheit <C=Celsius, F=Fahrenheit>"
+		},
+		"AdvancedIdle": {
+			"text": "",
+			"text2": [
+				"Detaillierte",
+				"Ruheansicht"
+			],
+			"desc": "Detaillierte Anzeige im Ruhemodus <J=An, N=Aus>"
+		},
+		"DisplayRotation": {
+			"text": "",
+			"text2": [
+				"Anzeige-",
+				"ausrichtung"
+			],
+			"desc": "Ausrichtung der Anzeige <A=Automatisch, L=Linkshändig, R=Rechtshändig>"
+		},
+		"BoostEnabled": {
+			"text": "",
+			"text2": [
+				"Boosttaste",
+				"aktiv?"
+			],
+			"desc": "Vordere Taste für Temperaturboost verwenden <J=An, N=Aus>"
+		},
+		"BoostTemperature": {
+			"text": "",
+			"text2": [
+				"Boosttemp-",
+				"eratur"
+			],
+			"desc": "Temperatur im Boostmodus  (In der eingestellten Einheit)"
+		},
+		"AutoStart": {
+			"text": "",
+			"text2": [
+				"Start im",
+				"Lötmodus?"
+			],
+			"desc": "Automatischer Start des Lötmodus beim Einschalten der Spannungsversorgung. <J=An, N=Aus>"
+		},
+		"CooldownBlink": {
+			"text": "",
+			"text2": [
+				"Abkühl-",
+				"blinken?"
+			],
+			"desc": "Blinkende Temperaturanzeige beim Abkühlen, solange heiß. <J=An, N=Aus>"
+		},
+		"TemperatureCalibration": {
+			"text": "",
+			"text2": [
+				"Temperatur",
+				"kalibrieren?"
+			],
+			"desc": "Kalibrierung der Lötspitzentemperatur"
+		},
+		"SettingsReset": {
+			"text": "",
+			"text2": [
+				"Einstellungen",
+				"zurücksetzen?"
+			],
+			"desc": "Alle Einstellungen zurücksetzen"
+		},
+		"VoltageCalibration": {
+			"text": "",
+			"text2": [
+				"Eingangsspannung",
+				"kalibrieren?"
+			],
+			"desc": "Kalibrierung der Eingangsspannung. Kurzer Tastendruck zum Einstellen, langer Tastendruck zum Verlassen."
+		},
+		"AdvancedSoldering": {
+			"text": "",
+			"text2": [
+				"Detaillierte",
+				"Lötansicht"
+			],
+			"desc": "Detaillierte Anzeige im Lötmodus <J=An, N=Aus>"
+		},
+		"ScrollingSpeed": {
+			"text": "",
+			"text2": [
+				"Scroll-",
+				"geschw."
+			],
+			"desc": "Scrollgeschwindigkeit der Texte"
+		},
+		"TipModel": {
+			"text": "TIPMO",
+			"text2": [
+				"Löt-",
+				"spitze"
+			],
+			"desc": "Auswahl der Lötspitze"
+		},
+		"SimpleCalibrationMode": {
+			"text": "SMPCAL",
+			"text2": [
+				"Einfache",
+				"Kalibrierung"
+			],
+			"desc": "Einfache Kalibrierung mittels heißem Wasser"
+		},
+		"AdvancedCalibrationMode": {
+			"text": "ADVCAL",
+			"text2": [
+				"Erweiterte",
+				"Kalibrierung"
+			],
+			"desc": "Erweiterte Kalibrierung mittels eines Thermoelements an der Lötspitze"
+		},
+		"PowerInput": {
+			"text": "PWRW",
+			"text2": [
+				"Leistungs-",
+				"aufnahme"
+			],
+			"desc": "Leistungsaufnahme der verwendeten Spannungsversorgung"
+		}
+	}
+}

Translation Editor/translation_en.json

@@ -0,0 +1,235 @@
+{
+	"languageCode": "EN",
+	"languageLocalName": "English",
+	"cyrillicGlyphs": false,
+	"messages": {
+		"SettingsCalibrationDone": "Calibration done!",
+		"SettingsCalibrationWarning": "Please ensure the tip is at room temperature before continuing!",
+		"SettingsResetWarning": "Are you sure you want to reset settings to default values?",
+		"UVLOWarningString": "DC LOW",
+		"UndervoltageString": "Undervoltage",
+		"InputVoltageString": "Input V: ",
+		"WarningTipTempString": "Tip Temp: ",
+		"BadTipString": "BAD TIP",
+		"SleepingSimpleString": "Zzzz",
+		"SleepingAdvancedString": "Sleeping...",
+		"WarningSimpleString": "HOT!",
+		"WarningAdvancedString": "!!! TIP HOT !!!",
+		"SleepingTipAdvancedString": "Tip:",
+		"IdleTipString": "Tip:",
+		"IdleSetString": " Set:",
+		"TipDisconnectedString": "TIP DISCONNECTED",
+		"SolderingAdvancedPowerPrompt": "Power: ",
+		"OffString": "Off",
+		"ResetOKMessage":"Reset OK",
+		"YourGainMessage":"Your Gain:"
+	},
+	"characters": {
+		"SettingRightChar": "R",
+		"SettingLeftChar": "L",
+		"SettingAutoChar": "A",
+		"SettingFastChar": "F",
+		"SettingSlowChar": "S"
+	},
+	"menuDouble": true,
+	"menuGroups": {
+		"SolderingMenu": {
+			"text2": [
+				"Soldering",
+				"Settings"
+			],
+			"desc": "Soldering settings"
+		},
+		"PowerSavingMenu": {
+			"text2": [
+				"Sleep",
+				"Modes"
+			],
+			"desc": "Power saving settings"
+		},
+		"UIMenu": {
+			"text2": [
+				"User",
+				"Interface"
+			],
+			"desc": "User interface settings"
+		},
+		"AdvancedMenu": {
+			"text2": [
+				"Advanced",
+				"Options"
+			],
+			"desc": "Advanced options"
+		}
+	},
+	"menuOptions": {
+		"PowerSource": {
+			"text": "PWRSC",
+			"text2": [
+				"Power",
+				"source"
+			],
+			"desc": "Power source. Sets cutoff voltage. <DC 10V> <S 3.3V per cell>"
+		},
+		"SleepTemperature": {
+			"text": "STMP",
+			"text2": [
+				"Sleep",
+				"temp"
+			],
+			"desc": "Sleep Temperature <C>"
+		},
+		"SleepTimeout": {
+			"text": "STME",
+			"text2": [
+				"Sleep",
+				"timeout"
+			],
+			"desc": "Sleep Timeout <Minutes/Seconds>"
+		},
+		"ShutdownTimeout": {
+			"text": "SHTME",
+			"text2": [
+				"Shutdown",
+				"timeout"
+			],
+			"desc": "Shutdown Timeout <Minutes>"
+		},
+		"MotionSensitivity": {
+			"text": "MSENSE",
+			"text2": [
+				"Motion",
+				"sensitivity"
+			],
+			"desc": "Motion Sensitivity <0.Off 1.least sensitive 9.most sensitive>"
+		},
+		"TemperatureUnit": {
+			"text": "TMPUNT",
+			"text2": [
+				"Temperature",
+				"units"
+			],
+			"desc": "Temperature Unit <C=Celsius F=Fahrenheit>"
+		},
+		"AdvancedIdle": {
+			"text": "ADVIDL",
+			"text2": [
+				"Detailed",
+				"idle screen"
+			],
+			"desc": "Display detailed information in a smaller font on the idle screen."
+		},
+		"DisplayRotation": {
+			"text": "DSPROT",
+			"text2": [
+				"Display",
+				"orientation"
+			],
+			"desc": "Display Orientation <A. Automatic L. Left Handed R. Right Handed>"
+		},
+		"BoostEnabled": {
+			"text": "BOOST",
+			"text2": [
+				"Boost mode",
+				"enabled"
+			],
+			"desc": "Enable front key enters boost mode 450C mode when soldering"
+		},
+		"BoostTemperature": {
+			"text": "BTMP",
+			"text2": [
+				"Boost",
+				"temp"
+			],
+			"desc": "Temperature when in \"boost\" mode"
+		},
+		"AutoStart": {
+			"text": "ASTART",
+			"text2": [
+				"Auto",
+				"start"
+			],
+			"desc": "Automatically starts the iron into soldering on power up. T=Soldering, S= Sleep mode,F=Off"
+		},
+		"CooldownBlink": {
+			"text": "CLBLNK",
+			"text2": [
+				"Cooldown",
+				"blink"
+			],
+			"desc": "Blink the temperature on the cooling screen while the tip is still hot."
+		},
+		"TemperatureCalibration": {
+			"text": "TMP CAL?",
+			"text2": [
+				"Calibrate",
+				"temperature?"
+			],
+			"desc": "Calibrate tip offset."
+		},
+		"SettingsReset": {
+			"text": "RESET?",
+			"text2": [
+				"Factory",
+				"Reset?"
+			],
+			"desc": "Reset all settings"
+		},
+		"VoltageCalibration": {
+			"text": "CAL VIN?",
+			"text2": [
+				"Calibrate",
+				"input voltage?"
+			],
+			"desc": "VIN Calibration. Buttons adjust, long press to exit"
+		},
+		"AdvancedSoldering": {
+			"text": "ADVSLD",
+			"text2": [
+				"Detailed",
+				"solder screen"
+			],
+			"desc": "Display detailed information while soldering"
+		},
+		"ScrollingSpeed": {
+			"text": "DESCSP",
+			"text2": [
+				"Scrolling",
+				"Speed"
+			],
+			"desc": "Speed this text scrolls past at"
+		},
+		"TipModel": {
+			"text": "TIPMO",
+			"text2": [
+				"Tip",
+				"Model"
+			],
+			"desc": "Tip Model selection"
+		},
+		"SimpleCalibrationMode": {
+			"text": "SMPCAL",
+			"text2": [
+				"Simple",
+				"Calibration"
+			],
+			"desc": "Simple Calibration using Hot water"
+		},
+		"AdvancedCalibrationMode": {
+			"text": "ADVCAL",
+			"text2": [
+				"Advanced",
+				"Calibration"
+			],
+			"desc": "Advanced calibration using thermocouple on the tip"
+		},
+		"PowerInput": {
+			"text": "PWRW",
+			"text2": [
+				"Power",
+				"Wattage"
+			],
+			"desc": "Power Wattage of the power adapter used"
+		}
+	}
+}

Translation Editor/translation_es.json

@@ -0,0 +1,234 @@
+{
+	"languageCode": "ES",
+	"languageLocalName": "Español",
+	"cyrillicGlyphs": false,
+	"messages": {
+		"SettingsCalibrationDone": "Calibration done!",
+		"SettingsCalibrationWarning": "¡Asegúrese que la punta esté a temperatura ambiente antes de proceder!",
+		"SettingsResetWarning": "¿Está seguro de volver a estado de fábrica?",
+		"UVLOWarningString": "DC BAJO",
+		"UndervoltageString": "Subtensión",
+		"InputVoltageString": "V entrada: ",
+		"WarningTipTempString": "Temp Punta: ",
+		"BadTipString": "ER PUNTA",
+		"SleepingSimpleString": "Zzzz",
+		"SleepingAdvancedString": "En reposo...",
+		"WarningSimpleString": "TEMP",
+		"WarningAdvancedString": "¡PUNTA CALIENTE!",
+		"SleepingTipAdvancedString": "Punta:",
+		"IdleTipString": "Punta:",
+		"IdleSetString": " Aj:",
+		"TipDisconnectedString": "SIN PUNTA",
+		"SolderingAdvancedPowerPrompt": "POTENCIA: ",
+		"OffString": "Off",
+		"ResetOKMessage":"Reset OK"
+	},
+	"characters": {
+		"SettingRightChar": "D",
+		"SettingLeftChar": "I",
+		"SettingAutoChar": "A",
+		"SettingFastChar": "R",
+		"SettingSlowChar": "L"
+	},
+	"menuDouble": true,
+	"menuGroups": {
+		"SolderingMenu": {
+			"text2": [
+				"Opciones de",
+				"Soldadura"
+			],
+			"desc": "Opciones de Soldadura"
+		},
+		"PowerSavingMenu": {
+			"text2": [
+				"Modos de",
+				"Reposo"
+			],
+			"desc": "Opciones de ahorro energético"
+		},
+		"UIMenu": {
+			"text2": [
+				"Interfaz",
+				"de Usuario"
+			],
+			"desc": "Opciones de interfaz de usuario"
+		},
+		"AdvancedMenu": {
+			"text2": [
+				"Opciones",
+				"Avanzadas"
+			],
+			"desc": "Opciones avanzadas"
+		}
+	},
+	"menuOptions": {
+		"PowerSource": {
+			"text": "PWRSC",
+			"text2": [
+				"Fuente",
+				"de energía"
+			],
+			"desc": "Fuente de energía. Ajusta el límite inferior de voltaje. <DC=10V S=3.3V por celda>"
+		},
+		"SleepTemperature": {
+			"text": "STMP",
+			"text2": [
+				"Temp en",
+				"reposo"
+			],
+			"desc": "Temperatura en reposo. <C>"
+		},
+		"SleepTimeout": {
+			"text": "STME",
+			"text2": [
+				"Tiempo h.",
+				"reposo"
+			],
+			"desc": "Tiempo hasta activar reposo. <Minutos>"
+		},
+		"ShutdownTimeout": {
+			"text": "SHTME",
+			"text2": [
+				"Tiempo h.",
+				"apagado"
+			],
+			"desc": "Tiempo hasta apagado. <Minutos>"
+		},
+		"MotionSensitivity": {
+			"text": "MSENSE",
+			"text2": [
+				"Sensibilidad",
+				"al movimiento"
+			],
+			"desc": "Sensibilidad del movimiento. <0=Apagado 1=El menos sensible 9=El más sensible>"
+		},
+		"TemperatureUnit": {
+			"text": "TMPUNT",
+			"text2": [
+				"Unidad de",
+				"temperatura"
+			],
+			"desc": "Unidad de temperatura."
+		},
+		"AdvancedIdle": {
+			"text": "ADVIDL",
+			"text2": [
+				"Más info en",
+				"modo inactivo"
+			],
+			"desc": "Muestra información detallada pequena en la pantalla inactiva."
+		},
+		"DisplayRotation": {
+			"text": "DSPROT",
+			"text2": [
+				"Orientación",
+				"de pantalla"
+			],
+			"desc": "Orientación de la pantalla <A=Automático I=Mano izquierda D=Mano derecha>"
+		},
+		"BoostEnabled": {
+			"text": "BOOST",
+			"text2": [
+				"Boost botón",
+				"activado"
+			],
+			"desc": "Activar el botón \"Boost\" en modo soldadura."
+		},
+		"BoostTemperature": {
+			"text": "BTMP",
+			"text2": [
+				"Temp en",
+				"Boost"
+			],
+			"desc": "Temperatura en modo \"Boost\". <C>"
+		},
+		"AutoStart": {
+			"text": "ASTART",
+			"text2": [
+				"Soldadura",
+				"al enchufar"
+			],
+			"desc": "Iniciar modo soldadura en el encendido. <V=Sí S=Modo reposo F=No>"
+		},
+		"CooldownBlink": {
+			"text": "CLBLNK",
+			"text2": [
+				"Parpadea m.",
+				"enfriamiento"
+			],
+			"desc": "Parpadea la temperatura en el enfriamiento si la punta sigue caliente."
+		},
+		"TemperatureCalibration": {
+			"text": "TMP CAL?",
+			"text2": [
+				"Calibrar temp",
+				"de la punta"
+			],
+			"desc": "Calibrar desviación térmica de la punta."
+		},
+		"SettingsReset": {
+			"text": "RESET?",
+			"text2": [
+				"Estado de",
+				"fábrica"
+			],
+			"desc": "Volver a estado de fábrica."
+		},
+		"VoltageCalibration": {
+			"text": "CAL VIN?",
+			"text2": [
+				"Calibrar",
+				"V entrada"
+			],
+			"desc": "Calibración VIN (Voltaje de entrada). Ajuste con ambos botones, pulsación larga para salir."
+		},
+		"AdvancedSoldering": {
+			"text": "ADVSLD",
+			"text2": [
+				"Inf detallada",
+				"del soldadura"
+			],
+			"desc": "Mostrar información detallada mientras suelda."
+		},
+		"ScrollingSpeed": {
+			"text": "DESCSP",
+			"text2": [
+				"Velocidad",
+				"del texto"
+			],
+			"desc": "Velocidad de desplazamiento del texto."
+		},
+		"TipModel": {
+			"text": "TIPMO",
+			"text2": [
+				"Tip",
+				"Model"
+			],
+			"desc": "Tip Model selection"
+		},
+		"SimpleCalibrationMode": {
+			"text": "SMPCAL",
+			"text2": [
+				"Simple",
+				"Calibration"
+			],
+			"desc": "Simple Calibration using Hot water"
+		},
+		"AdvancedCalibrationMode": {
+			"text": "ADVCAL",
+			"text2": [
+				"Advanced",
+				"Calibration"
+			],
+			"desc": "Advanced calibration using thermocouple on the tip"
+		},
+		"PowerInput": {
+			"text": "PWRW",
+			"text2": [
+				"Power",
+				"Wattage"
+			],
+			"desc": "Power Wattage of the power adapter used"
+		}
+	}
+}

Translation Editor/translation_fi.json

@@ -0,0 +1,234 @@
+{
+	"languageCode": "FI",
+	"languageLocalName": "Suomi",
+	"cyrillicGlyphs": false,
+	"messages": {
+		"SettingsCalibrationDone": "Calibration done!",
+		"SettingsCalibrationWarning": "Varmista että kärki on huoneenlämpöinen ennen jatkamista!",
+		"SettingsResetWarning": "Haluatko varmasti palauttaa oletusarvot?",
+		"UVLOWarningString": "DC LOW",
+		"UndervoltageString": "Alijännite",
+		"InputVoltageString": "Jännite: ",
+		"WarningTipTempString": "Lämpötila: ",
+		"BadTipString": "VIKATILA",
+		"SleepingSimpleString": "Zzzz",
+		"SleepingAdvancedString": "Lepotila...",
+		"WarningSimpleString": "HOT",
+		"WarningAdvancedString": "! KÄRKI KUUMA !",
+		"SleepingTipAdvancedString": "Kärki:",
+		"IdleTipString": "Kärki:",
+		"IdleSetString": " Asetus:",
+		"TipDisconnectedString": "KÄRKI ON IRTI",
+		"SolderingAdvancedPowerPrompt": "Teho: ",
+		"OffString": "OFF",
+		"ResetOKMessage":"Reset OK"
+	},
+	"characters": {
+		"SettingRightChar": "O",
+		"SettingLeftChar": "V",
+		"SettingAutoChar": "A",
+		"SettingFastChar": "N",
+		"SettingSlowChar": "H"
+	},
+	"menuDouble": true,
+	"menuGroups": {
+		"SolderingMenu": {
+			"text2": [
+				"Juotos-",
+				"asetukset"
+			],
+			"desc": "Juotosasetukset"
+		},
+		"PowerSavingMenu": {
+			"text2": [
+				"Lepotilan",
+				"asetukset"
+			],
+			"desc": "Virransäästöasetukset"
+		},
+		"UIMenu": {
+			"text2": [
+				"Käyttö-",
+				"liittymä"
+			],
+			"desc": "Käyttöliittymän asetukset"
+		},
+		"AdvancedMenu": {
+			"text2": [
+				"Lisä-",
+				"asetukset"
+			],
+			"desc": "Lisäasetukset"
+		}
+	},
+	"menuOptions": {
+		"PowerSource": {
+			"text": "",
+			"text2": [
+				"Virtalähde",
+				"DC"
+			],
+			"desc": "Käytettävä virtalähde. Asettaa katkaisujänniteen. <DC 10V, 3S=9.9V, 4S=13.2V, 5S=16.5V, 6S=19.8V>"
+		},
+		"SleepTemperature": {
+			"text": "",
+			"text2": [
+				"Lepotilan",
+				"lämpötila"
+			],
+			"desc": "Lepotilan lämpötila. <C>"
+		},
+		"SleepTimeout": {
+			"text": "",
+			"text2": [
+				"Lepotilan",
+				"viive"
+			],
+			"desc": "Lepotilan viive. <minuuttia/sekuntia>"
+		},
+		"ShutdownTimeout": {
+			"text": "",
+			"text2": [
+				"Sammutus",
+				"viive"
+			],
+			"desc": "Automaattisen sammutuksen aikaviive. <minuuttia>"
+		},
+		"MotionSensitivity": {
+			"text": "",
+			"text2": [
+				"Liikkeen",
+				"herkkyys"
+			],
+			"desc": "Liikkeentunnistuksen herkkyys. <0=pois, 1=epäherkin, 9=herkin>"
+		},
+		"TemperatureUnit": {
+			"text": "",
+			"text2": [
+				"Lämpötilan",
+				"yksikkö"
+			],
+			"desc": "Lämpötilan yksikkö. <C=celsius, F=fahrenheit>"
+		},
+		"AdvancedIdle": {
+			"text": "",
+			"text2": [
+				"Tiedot",
+				"lepotilassa"
+			],
+			"desc": "Näyttää yksityiskohtaisemmat tiedot lepotilassa."
+		},
+		"DisplayRotation": {
+			"text": "",
+			"text2": [
+				"Näytön",
+				"kierto"
+			],
+			"desc": "Näytön kierto. <A=automaattinen O=oikeakätinen V=vasenkätinen>"
+		},
+		"BoostEnabled": {
+			"text": "",
+			"text2": [
+				"Tehostus",
+				"käytössä"
+			],
+			"desc": "Etupainikeella siirrytään juotettaessa tehostustilaan."
+		},
+		"BoostTemperature": {
+			"text": "",
+			"text2": [
+				"Tehostus-",
+				"lämpötila"
+			],
+			"desc": "Tehostustilan lämpötila"
+		},
+		"AutoStart": {
+			"text": "",
+			"text2": [
+				"Autom.",
+				"käynnistys"
+			],
+			"desc": "Käynnistää virrat kytkettäessä juotostilan automaattisesti. T=juotostila, S=Lepotila, F=Ei käytössä"
+		},
+		"CooldownBlink": {
+			"text": "",
+			"text2": [
+				"Jäähdytyksen",
+				"vilkutus"
+			],
+			"desc": "Vilkuttaa jäähtyessä juotoskärjen lämpötilaa sen ollessa vielä vaarallisen kuuma."
+		},
+		"TemperatureCalibration": {
+			"text": "",
+			"text2": [
+				"Kalibroi",
+				"lämpötila?"
+			],
+			"desc": "Kalibroi kärjen lämpötilaeron."
+		},
+		"SettingsReset": {
+			"text": "",
+			"text2": [
+				"Palauta",
+				"tehdasasetukset?"
+			],
+			"desc": "Palauta kaikki asetukset oletusarvoihin."
+		},
+		"VoltageCalibration": {
+			"text": "",
+			"text2": [
+				"Kalibroi",
+				"tulojännite?"
+			],
+			"desc": "Tulojännitten kalibrointi (VIN). Painikkeilla säädetään ja pitkään painamalla poistutaan."
+		},
+		"AdvancedSoldering": {
+			"text": "",
+			"text2": [
+				"Tarkempi",
+				"juotosnäyttö"
+			],
+			"desc": "Näyttää yksityiskohtaisemmat tiedot juotostilassa."
+		},
+		"ScrollingSpeed": {
+			"text": "",
+			"text2": [
+				"Tietojen",
+				"näyttönopeus"
+			],
+			"desc": "Näiden selitetekstien vieritysnopeus."
+		},
+		"TipModel": {
+			"text": "TIPMO",
+			"text2": [
+				"Tip",
+				"Model"
+			],
+			"desc": "Tip Model selection"
+		},
+		"SimpleCalibrationMode": {
+			"text": "SMPCAL",
+			"text2": [
+				"Simple",
+				"Calibration"
+			],
+			"desc": "Simple Calibration using Hot water"
+		},
+		"AdvancedCalibrationMode": {
+			"text": "ADVCAL",
+			"text2": [
+				"Advanced",
+				"Calibration"
+			],
+			"desc": "Advanced calibration using thermocouple on the tip"
+		},
+		"PowerInput": {
+			"text": "PWRW",
+			"text2": [
+				"Power",
+				"Wattage"
+			],
+			"desc": "Power Wattage of the power adapter used"
+		}
+	}
+}

Translation Editor/translation_fr.json

@@ -0,0 +1,234 @@
+{
+	"languageCode": "FR",
+	"languageLocalName": "Français",
+	"cyrillicGlyphs": false,
+	"messages": {
+		"SettingsCalibrationDone": "Calibration effectuée!",
+		"SettingsCalibrationWarning": "Assurez-vous que la panne soit à température ambiante avant de continuer!",
+		"SettingsResetWarning": "Voulez-vous vraiment réinitialiser les paramètres aux valeurs d'usine?",
+		"UVLOWarningString": "DC FAIBL",
+		"UndervoltageString": "Sous-tension",
+		"InputVoltageString": "V d'entrée:",
+		"WarningTipTempString": "Temp. Panne:",
+		"BadTipString": "PANNE HS",
+		"SleepingSimpleString": "Zzzz",
+		"SleepingAdvancedString": "En veille...",
+		"WarningSimpleString": "HOT!",
+		"WarningAdvancedString": "ATTENTION! CHAUD",
+		"SleepingTipAdvancedString": "Panne:",
+		"IdleTipString": "Tip:",
+		"IdleSetString": " Set:",
+		"TipDisconnectedString": "PANNE DÉBRANCHÉE",
+		"SolderingAdvancedPowerPrompt": "Puissance: ",
+		"OffString": "Off",
+		"ResetOKMessage":"Reset OK"
+	},
+	"characters": {
+		"SettingRightChar": "D",
+		"SettingLeftChar": "G",
+		"SettingAutoChar": "A",
+		"SettingFastChar": "R",
+		"SettingSlowChar": "L"
+	},
+	"menuDouble": true,
+	"menuGroups": {
+		"SolderingMenu": {
+			"text2": [
+				"Paramètres",
+				"de soudure"
+			],
+			"desc": "Paramètres de soudure"
+		},
+		"PowerSavingMenu": {
+			"text2": [
+				"Mode",
+				"veille"
+			],
+			"desc": "Paramètres d'économie d'énergie"
+		},
+		"UIMenu": {
+			"text2": [
+				"Interface",
+				"utilisateur"
+			],
+			"desc": "Paramètres de l'interface utilisateur"
+		},
+		"AdvancedMenu": {
+			"text2": [
+				"Options",
+				"avancées"
+			],
+			"desc": "Options avancées"
+		}
+	},
+	"menuOptions": {
+		"PowerSource": {
+			"text": "",
+			"text2": [
+				"Source",
+				"d'alim"
+			],
+			"desc": "Source d'alimentation. Règle la tension de coupure <DC=10V S=3.3V par cellules>"
+		},
+		"SleepTemperature": {
+			"text": "",
+			"text2": [
+				"Temp.",
+				"veille"
+			],
+			"desc": "Température en veille <C>"
+		},
+		"SleepTimeout": {
+			"text": "",
+			"text2": [
+				"Délai",
+				"veille"
+			],
+			"desc": "Délai avant mise en veille <Minutes>"
+		},
+		"ShutdownTimeout": {
+			"text": "",
+			"text2": [
+				"Délai",
+				"extinction"
+			],
+			"desc": "Délai avant extinction <Minutes>"
+		},
+		"MotionSensitivity": {
+			"text": "",
+			"text2": [
+				"Sensibilité",
+				"au mouvement"
+			],
+			"desc": "Sensibilité du capteur de mouvement <0=Inactif 1=Peu sensible 9=Tres sensible>"
+		},
+		"TemperatureUnit": {
+			"text": "",
+			"text2": [
+				"Unité de",
+				"température"
+			],
+			"desc": "Unité de température <C=Celsius F=Fahrenheit>"
+		},
+		"AdvancedIdle": {
+			"text": "",
+			"text2": [
+				"Écran veille",
+				"détaillé"
+			],
+			"desc": "Afficher des informations détaillées lors de la veille."
+		},
+		"DisplayRotation": {
+			"text": "",
+			"text2": [
+				"Orientation",
+				"de l'écran"
+			],
+			"desc": "Orientation de l'affichage <A=Automatique G=Gaucher D=Droitier>"
+		},
+		"BoostEnabled": {
+			"text": "",
+			"text2": [
+				"Activation du",
+				"mode Boost"
+			],
+			"desc": "Activer le mode \"Boost\" en maintenant le bouton de devant pendant la soudure"
+		},
+		"BoostTemperature": {
+			"text": "",
+			"text2": [
+				"Temp.",
+				"Boost"
+			],
+			"desc": "Température du mode \"Boost\""
+		},
+		"AutoStart": {
+			"text": "",
+			"text2": [
+				"Démarrage",
+				"automatique"
+			],
+			"desc": "Démarrer automatiquement la soudure a l'allumage <A=Activé, V=Mode Veille, D=Désactivé>"
+		},
+		"CooldownBlink": {
+			"text": "",
+			"text2": [
+				"Refroidir en",
+				"clignotant"
+			],
+			"desc": "Faire clignoter la température lors du refroidissement tant que la panne est chaude."
+		},
+		"TemperatureCalibration": {
+			"text": "",
+			"text2": [
+				"Étalonner",
+				"température"
+			],
+			"desc": "Étalonner température de la panne."
+		},
+		"SettingsReset": {
+			"text": "",
+			"text2": [
+				"Réinitialisation",
+				"d'usine"
+			],
+			"desc": "Réinitialiser tous les réglages"
+		},
+		"VoltageCalibration": {
+			"text": "",
+			"text2": [
+				"Étalonner",
+				"tension d'entrée"
+			],
+			"desc": "Étalonner tension d'entrée. Boutons pour ajuster, appui long pour quitter"
+		},
+		"AdvancedSoldering": {
+			"text": "",
+			"text2": [
+				"Écran soudure",
+				"détaillé"
+			],
+			"desc": "Afficher des informations détaillées pendant la soudure"
+		},
+		"ScrollingSpeed": {
+			"text": "",
+			"text2": [
+				"Vitesse de",
+				"défilement"
+			],
+			"desc": "Vitesse de défilement de ce texte en <R=Rapide L=Lent>"
+		},
+		"TipModel": {
+			"text": "TIPMO",
+			"text2": [
+				"Panne",
+				"Modèle"
+			],
+			"desc": "Sélection du modèle de la panne"
+		},
+		"SimpleCalibrationMode": {
+			"text": "SMPCAL",
+			"text2": [
+				"Calibration",
+				"simple"
+			],
+			"desc": "Calibration simple à l'aide d'eau chaude"
+		},
+		"AdvancedCalibrationMode": {
+			"text": "ADVCAL",
+			"text2": [
+				"Calibration",
+				"avancées"
+			],
+			"desc": "Calibration avancées à l'aide d'un thermocouple sur la panne"
+		},
+		"PowerInput": {
+			"text": "PWRW",
+			"text2": [
+				"Puissance de",
+				"l'alimentation"
+			],
+			"desc": "Puissance de l'alimentation utilisée"
+		}
+	}
+}

Translation Editor/translation_hr.json

@@ -0,0 +1,234 @@
+{
+	"languageCode": "HR",
+	"languageLocalName": "Hrvatski",
+	"cyrillicGlyphs": false,
+	"messages": {
+		"SettingsCalibrationDone": "Kalibracija gotova!",
+		"SettingsCalibrationWarning": "Provjerite da je vršak ohlađen na sobnu temperaturu prije nego što nastavite!",
+		"SettingsResetWarning": "Jeste li sigurni da želite sve postavke vratiti na tvorničke vrijednosti?",
+		"UVLOWarningString": "BATERIJA",
+		"UndervoltageString": "PRENIZAK NAPON",
+		"InputVoltageString": "Napajanje: ",
+		"WarningTipTempString": "Temp vrha: ",
+		"BadTipString": "LOŠ VRH",
+		"SleepingSimpleString": "Zzz ",
+		"SleepingAdvancedString": "SPAVANJE...",
+		"WarningSimpleString": "VRUĆ",
+		"WarningAdvancedString": "OPREZ, VRUĆE!",
+		"SleepingTipAdvancedString": "Vrh: ",
+		"IdleTipString": "Vrh: ",
+		"IdleSetString": " / ",
+		"TipDisconnectedString": "VRH NIJE SPOJEN!",
+		"SolderingAdvancedPowerPrompt": "Snaga: ",
+		"OffString": "Off",
+		"ResetOKMessage":"Reset OK"
+	},
+	"characters": {
+		"SettingRightChar": "D",
+		"SettingLeftChar": "L",
+		"SettingAutoChar": "A",
+		"SettingFastChar": "B",
+		"SettingSlowChar": "S"
+	},
+	"menuDouble": true,
+	"menuGroups": {
+		"SolderingMenu": {
+			"text2": [
+				"Postavke",
+				"lemljenja"
+			],
+			"desc": "Postavke pri lemljenju"
+		},
+		"PowerSavingMenu": {
+			"text2": [
+				"Ušteda",
+				"energije"
+			],
+			"desc": "Postavke spavanja i štednje energije"
+		},
+		"UIMenu": {
+			"text2": [
+				"Korisničko",
+				"sučelje"
+			],
+			"desc": "Postavke korisničkog sučelja"
+		},
+		"AdvancedMenu": {
+			"text2": [
+				"Napredne",
+				"opcije"
+			],
+			"desc": "Upravljanje naprednim opcijama"
+		}
+	},
+	"menuOptions": {
+		"PowerSource": {
+			"text": "PWRSC",
+			"text2": [
+				"Izvor",
+				"napajanja"
+			],
+			"desc": "Izvor napajanja. Postavlja napon isključivanja. <DC 10V> <S 3.3V po ćeliji>"
+		},
+		"SleepTemperature": {
+			"text": "STMP",
+			"text2": [
+				"Temp",
+				"spavanja"
+			],
+			"desc": "Temperatura na koju se spušta lemilica nakon određenog vremena mirovanja. <C/F>"
+		},
+		"SleepTimeout": {
+			"text": "STME",
+			"text2": [
+				"Vrijeme",
+				"spavanja"
+			],
+			"desc": "Vrijeme mirovanja nakon kojega lemilica spušta temperaturu. <Minute/Sekunde>"
+		},
+		"ShutdownTimeout": {
+			"text": "SHTME",
+			"text2": [
+				"Vrijeme",
+				"gašenja"
+			],
+			"desc": "Vrijeme mirovanja nakon kojega će se lemilica ugasiti. <Minute>"
+		},
+		"MotionSensitivity": {
+			"text": "MSENSE",
+			"text2": [
+				"Osjetljivost",
+				"pokreta"
+			],
+			"desc": "Osjetljivost prepoznavanja pokreta. <0=Ugašeno, 1=Najmanje osjetljivo, 9=Najosjetljivije>"
+		},
+		"TemperatureUnit": {
+			"text": "TMPUNT",
+			"text2": [
+				"Jedinica",
+				"temperature"
+			],
+			"desc": "Jedinica temperature. <C=Celzij, F=Fahrenheit>"
+		},
+		"AdvancedIdle": {
+			"text": "ADVIDL",
+			"text2": [
+				"Detalji",
+				"pri čekanju"
+			],
+			"desc": "Prikazivanje detaljnih informacija tijekom čekanja."
+		},
+		"DisplayRotation": {
+			"text": "DSPROT",
+			"text2": [
+				"Rotacija",
+				"ekrana"
+			],
+			"desc": "Orijentacija ekrana. <A=Automatski, L=Ljevoruki, D=Desnoruki>"
+		},
+		"BoostEnabled": {
+			"text": "BOOST",
+			"text2": [
+				"Boost",
+				"način"
+			],
+			"desc": "Držanjem prednjeg gumba prilikom lemljenja aktivira se pojačani (Boost) način."
+		},
+		"BoostTemperature": {
+			"text": "BTMP",
+			"text2": [
+				"Boost",
+				"temp"
+			],
+			"desc": "Temperatura u pojačanom (Boost) načinu."
+		},
+		"AutoStart": {
+			"text": "ASTART",
+			"text2": [
+				"Auto",
+				"start"
+			],
+			"desc": "Ako je aktivno, lemilica po uključivanju napajanja odmah počinje grijati."
+		},
+		"CooldownBlink": {
+			"text": "CLBLNK",
+			"text2": [
+				"Upozorenje",
+				"pri hlađenju"
+			],
+			"desc": "Bljeskanje temperature prilikom hlađenja, ako je lemilica vruća."
+		},
+		"TemperatureCalibration": {
+			"text": "TMP CAL?",
+			"text2": [
+				"Kalibracija",
+				"temperature"
+			],
+			"desc": "Kalibriranje temperature mjeri razliku temperatura vrška i drške, dok je lemilica hladna."
+		},
+		"SettingsReset": {
+			"text": "RESET?",
+			"text2": [
+				"Tvorničke",
+				"postavke"
+			],
+			"desc": "Vraćanje svih postavki na tvorničke vrijednosti."
+		},
+		"VoltageCalibration": {
+			"text": "CAL VIN?",
+			"text2": [
+				"Kalibracija",
+				"napona napajanja"
+			],
+			"desc": "Kalibracija ulaznog napona. Podešavanje gumbima, dugački pritisak za kraj."
+		},
+		"AdvancedSoldering": {
+			"text": "ADVSLD",
+			"text2": [
+				"Detalji",
+				"pri lemljenju"
+			],
+			"desc": "Prikazivanje detaljnih informacija tijekom lemljenja."
+		},
+		"ScrollingSpeed": {
+			"text": "DESCSP",
+			"text2": [
+				"Brzina",
+				"poruka"
+			],
+			"desc": "Brzina kretanja dugačkih poruka. <B=brzo, S=sporo>"
+		},
+		"TipModel": {
+			"text": "TIPMO",
+			"text2": [
+				"Model",
+				"Vrha"
+			],
+			"desc": "Odabir modela lemnog vrha"
+		},
+		"SimpleCalibrationMode": {
+			"text": "SMPCAL",
+			"text2": [
+				"Jednostavna",
+				"kalibracija"
+			],
+			"desc": "Kalibracija kipućom vodom"
+		},
+		"AdvancedCalibrationMode": {
+			"text": "ADVCAL",
+			"text2": [
+				"Napredna",
+				"kalibracija"
+			],
+			"desc": "Kalibracija korištenjem termo-elementa"
+		},
+		"PowerInput": {
+			"text": "PWRW",
+			"text2": [
+				"Snaga",
+				"napajanja"
+			],
+			"desc": "Snaga modula za napajanje"
+		}
+	}
+}

Translation Editor/translation_hu.json

@@ -0,0 +1,234 @@
+{
+	"languageCode": "HU",
+	"languageLocalName": "Magyar",
+	"cyrillicGlyphs": false,
+	"messages": {
+		"SettingsCalibrationDone": "Kalibráció befejezve!",
+		"SettingsCalibrationWarning": "Folytatás előtt győződjön meg róla, hogy a hegy szobahőmérsékletű!",
+		"SettingsResetWarning": "Biztosan visszaállítja a beállításokat az alapértelmezett értékekre?",
+		"UVLOWarningString": "DC KEVÉS",
+		"UndervoltageString": "Alulfeszültség",
+		"InputVoltageString": "Bemenet V: ",
+		"WarningTipTempString": "Hegy hő: ",
+		"BadTipString": "HEGY HIB",
+		"SleepingSimpleString": "Zzzz",
+		"SleepingAdvancedString": "Alvás...",
+		"WarningSimpleString": "FORR",
+		"WarningAdvancedString": "!! FORRÓ HEGY !!",
+		"SleepingTipAdvancedString": "Hegy:",
+		"IdleTipString": "Hegy:",
+		"IdleSetString": " Cél:",
+		"TipDisconnectedString": "HEGY LEVÉVE",
+		"SolderingAdvancedPowerPrompt": "Telj: ",
+		"OffString": "Ki",
+		"ResetOKMessage":"Reset OK"
+	},
+	"characters": {
+		"SettingRightChar": "J",
+		"SettingLeftChar": "B",
+		"SettingAutoChar": "A",
+		"SettingFastChar": "G",
+		"SettingSlowChar": "L"
+	},
+	"menuDouble": false,
+	"menuGroups": {
+		"SolderingMenu": {
+			"text2": [
+				"Forrasztási",
+				"beállítások"
+			],
+			"desc": "Forrasztási beállítások"
+		},
+		"PowerSavingMenu": {
+			"text2": [
+				"Alvási",
+				"módok"
+			],
+			"desc": "Energiatakarékossági beállítások"
+		},
+		"UIMenu": {
+			"text2": [
+				"Felhasználó",
+				"felület"
+			],
+			"desc": "Felhasználói felület beállításai"
+		},
+		"AdvancedMenu": {
+			"text2": [
+				"Haladó",
+				"beállítások"
+			],
+			"desc": "Haladó beállítások"
+		}
+	},
+	"menuOptions": {
+		"PowerSource": {
+			"text": "ÁRAMF",
+			"text2": [
+				"Áram",
+				"forrás"
+			],
+			"desc": "Áramforrás. Beállítja a lekapcsolási feszültséget. <DC 10V> <S 3.3V cellánként>"
+		},
+		"SleepTemperature": {
+			"text": "AHŐM",
+			"text2": [
+				"Alvási",
+				"hőfok"
+			],
+			"desc": "Alvási hőmérséklet <C>"
+		},
+		"SleepTimeout": {
+			"text": "AIDŐ",
+			"text2": [
+				"Alvás",
+				"időzítő"
+			],
+			"desc": "Alvás időzítő <perc/másodperc>"
+		},
+		"ShutdownTimeout": {
+			"text": "KIIDŐ",
+			"text2": [
+				"Kikapcsolás",
+				"időzítő"
+			],
+			"desc": "Kikapcsolási időzítő <perc>"
+		},
+		"MotionSensitivity": {
+			"text": "MOZGÉR",
+			"text2": [
+				"Mozgás",
+				"érzékenység"
+			],
+			"desc": "Mozgás érzékenység beállítása. <0.kikapcsolva 1.legkevésbé érzékeny 9.legérzékenyebb>"
+		},
+		"TemperatureUnit": {
+			"text": "HŐEGYS",
+			"text2": [
+				"Hőmérséklet",
+				"mértékegysége"
+			],
+			"desc": "Hőmérséklet mértékegysége <C=Celsius F=Fahrenheit>"
+		},
+		"AdvancedIdle": {
+			"text": "RÉSZLI",
+			"text2": [
+				"Részletes",
+				"készenlét"
+			],
+			"desc": "Részletes információ megjelenítése kisebb betűméretben a készenléti képernyőn."
+		},
+		"DisplayRotation": {
+			"text": "KIJTÁJ",
+			"text2": [
+				"Kijelző",
+				"tájolása"
+			],
+			"desc": "Kijelző tájolása <A. automatikus B. balkezes J. jobbkezes>"
+		},
+		"BoostEnabled": {
+			"text": "BOOST",
+			"text2": [
+				"Boost",
+				"mód"
+			],
+			"desc": "Elülső gombbal boost módba (450C) lép forrasztás közben"
+		},
+		"BoostTemperature": {
+			"text": "BHŐ",
+			"text2": [
+				"Boost",
+				"hőfok"
+			],
+			"desc": "Hőmérséklet \"boost\" módban"
+		},
+		"AutoStart": {
+			"text": "ASTART",
+			"text2": [
+				"Automatikus",
+				"indítás"
+			],
+			"desc": "Bekapcsolás után automatikusan lépjen forrasztás módba. T=forrasztás, S=alvó mód, F=ki"
+		},
+		"CooldownBlink": {
+			"text": "HŰLÉSV",
+			"text2": [
+				"Villogás",
+				"hűléskor"
+			],
+			"desc": "Villogjon a hőmérséklet hűlés közben, amíg a hegy forró."
+		},
+		"TemperatureCalibration": {
+			"text": "HŐM KAL?",
+			"text2": [
+				"Hőmérséklet",
+				"kalibrálása?"
+			],
+			"desc": "Hegy hőmérséklet-különbségének kalibrálása."
+		},
+		"SettingsReset": {
+			"text": "RESET?",
+			"text2": [
+				"Gyári",
+				"beállítások?"
+			],
+			"desc": "Beállítások alaphelyzetbe állítása"
+		},
+		"VoltageCalibration": {
+			"text": "VIN KAL?",
+			"text2": [
+				"Bemeneti fesz",
+				"kalibrálása?"
+			],
+			"desc": "Bemeneti feszültség kalibrálása. Röviden megnyomva módosítás, hosszan megnyomva kilépés"
+		},
+		"AdvancedSoldering": {
+			"text": "HALKÉP",
+			"text2": [
+				"Részletes",
+				"forr. kép."
+			],
+			"desc": "Részletes információk megjelenítése forrasztás közben"
+		},
+		"ScrollingSpeed": {
+			"text": "GÖRGS",
+			"text2": [
+				"Görgetés",
+				"sebessége"
+			],
+			"desc": "Szöveggörgetés sebessége"
+		},
+		"TipModel": {
+			"text": "HEGYMOD",
+			"text2": [
+				"Forrasztóhegy",
+				"modell"
+			],
+			"desc": "Forrasztóhegy modell kiválasztása"
+		},
+		"SimpleCalibrationMode": {
+			"text": "EGYSZKAL",
+			"text2": [
+				"Egyszerű",
+				"kalibráció"
+			],
+			"desc": "Egyszerű kalibrálás forró víz segítségével"
+		},
+		"AdvancedCalibrationMode": {
+			"text": "HALKAL",
+			"text2": [
+				"Haladó",
+				"Kalibráció"
+			],
+			"desc": "Haladó kalibrálás hegyre helyezett hőelem segítségével"
+		},
+		"PowerInput": {
+			"text": "TELJW",
+			"text2": [
+				"Bemeneti",
+				"teljesítmény"
+			],
+			"desc": "A tápegység által leadott teljesítmény"
+		}
+	}
+}

Translation Editor/translation_it.json

@@ -0,0 +1,234 @@
+{
+	"languageCode": "IT",
+	"languageLocalName": "Italiano",
+	"cyrillicGlyphs": false,
+	"messages": {
+		"SettingsCalibrationDone": "Calibrazione effettuata",
+		"SettingsCalibrationWarning": "Assicurati che la punta si trovi a temperatura ambiente prima di continuare!",
+		"SettingsResetWarning": "Ripristinare le impostazioni iniziali?",
+		"UVLOWarningString": "DC BASSA",
+		"UndervoltageString": "DC INSUFFICIENTE",
+		"InputVoltageString": "V ingresso:",
+		"WarningTipTempString": "Temp punta:",
+		"BadTipString": "PUNTA NO",
+		"SleepingSimpleString": "Zzz ",
+		"SleepingAdvancedString": "Standby",
+		"WarningSimpleString": "HOT!",
+		"WarningAdvancedString": "PUNTA CALDA!",
+		"SleepingTipAdvancedString": "Punta:",
+		"IdleTipString": "T punta:",
+		"IdleSetString": "/",
+		"TipDisconnectedString": "PUNTA ASSENTE",
+		"SolderingAdvancedPowerPrompt": "Potenz:",
+		"OffString": "OFF",
+		"ResetOKMessage":"Reset OK"
+	},
+	"characters": {
+		"SettingRightChar": "D",
+		"SettingLeftChar": "S",
+		"SettingAutoChar": "A",
+		"SettingFastChar": "V",
+		"SettingSlowChar": "L"
+	},
+	"menuDouble": true,
+	"menuGroups": {
+		"SolderingMenu": {
+			"text2": [
+				"Opzioni",
+				"saldatura"
+			],
+			"desc": "Menù d'impostazioni della modalità Saldatura"
+		},
+		"PowerSavingMenu": {
+			"text2": [
+				"Risparmio",
+				"energetico"
+			],
+			"desc": "Menù d'impostazioni per il risparmio energetico"
+		},
+		"UIMenu": {
+			"text2": [
+				"Interfaccia",
+				"utente"
+			],
+			"desc": "Menù d'impostazioni dell'interfaccia utente"
+		},
+		"AdvancedMenu": {
+			"text2": [
+				"Opzioni",
+				"avanzate"
+			],
+			"desc": "Menù d'impostazioni avanzate"
+		}
+	},
+	"menuOptions": {
+		"PowerSource": {
+			"text": "",
+			"text2": [
+				"Sorgente",
+				"alimentaz"
+			],
+			"desc": "Scegli la sorgente di alimentazione; se a batteria, limita lo scaricamento al valore di soglia <DC: 10V; S: 3,3V per cella>"
+		},
+		"SleepTemperature": {
+			"text": "",
+			"text2": [
+				"Temp",
+				"standby"
+			],
+			"desc": "Imposta la temperatura da mantenere in modalità Standby <°C/°F>"
+		},
+		"SleepTimeout": {
+			"text": "",
+			"text2": [
+				"Timer",
+				"standby"
+			],
+			"desc": "Imposta il timer per entrare in modalità Standby <minuti/secondi>"
+		},
+		"ShutdownTimeout": {
+			"text": "",
+			"text2": [
+				"Timer",
+				"spegnimento"
+			],
+			"desc": "Imposta il timer per lo spegnimento <minuti>"
+		},
+		"MotionSensitivity": {
+			"text": "",
+			"text2": [
+				"Sensibilità",
+				"al movimento"
+			],
+			"desc": "Imposta la sensibilità al movimento per uscire dalla modalità Standby <0: nessuna; 1: minima; 9: massima>"
+		},
+		"TemperatureUnit": {
+			"text": "",
+			"text2": [
+				"Unità di",
+				"temperatura"
+			],
+			"desc": "Scegli l'unità di misura per la temperatura <C: grado Celsius; F: grado Farenheit>"
+		},
+		"AdvancedIdle": {
+			"text": "",
+			"text2": [
+				"Interfaccia",
+				"testuale"
+			],
+			"desc": "Mostra informazioni dettagliate all'interno della schermata principale"
+		},
+		"DisplayRotation": {
+			"text": "",
+			"text2": [
+				"Orientamento",
+				"display"
+			],
+			"desc": "Imposta l'orientamento del display <A: automatico; S: mano sinistra; D: mano destra>"
+		},
+		"BoostEnabled": {
+			"text": "",
+			"text2": [
+				"Funzione",
+				"«Turbo»"
+			],
+			"desc": "Attiva la funzione «Turbo», durante la modalità Saldatura, tenendo premuto il tasto superiore"
+		},
+		"BoostTemperature": {
+			"text": "",
+			"text2": [
+				"Temp",
+				"«Turbo»"
+			],
+			"desc": "Imposta la temperatura della funzione «Turbo»"
+		},
+		"AutoStart": {
+			"text": "",
+			"text2": [
+				"Avvio",
+				"automatico"
+			],
+			"desc": "Attiva automaticamente il saldatore quando viene alimentato <A: saldatura; S: standby; D: disattiva>"
+		},
+		"CooldownBlink": {
+			"text": "",
+			"text2": [
+				"Avviso",
+				"punta calda"
+			],
+			"desc": "Mostra, lampeggiante, la temperatura durante il raffreddamento se la punta è ancora calda"
+		},
+		"TemperatureCalibration": {
+			"text": "",
+			"text2": [
+				"Calibrazione",
+				"temperatura"
+			],
+			"desc": "Calibra le rilevazioni di temperatura"
+		},
+		"SettingsReset": {
+			"text": "",
+			"text2": [
+				"Ripristino",
+				"impostazioni"
+			],
+			"desc": "Ripristina tutte le impostazioni"
+		},
+		"VoltageCalibration": {
+			"text": "",
+			"text2": [
+				"Calibrazione",
+				"tensione"
+			],
+			"desc": "Calibra la tensione in ingresso; regola con entrambi i tasti, tieni premuto il tasto superiore per uscire"
+		},
+		"AdvancedSoldering": {
+			"text": "",
+			"text2": [
+				"Dettagli",
+				"saldatura"
+			],
+			"desc": "Mostra informazioni dettagliate durante la modalità Saldatura"
+		},
+		"ScrollingSpeed": {
+			"text": "",
+			"text2": [
+				"Velocità",
+				"testo"
+			],
+			"desc": "Imposta la velocità di scorrimento del testo <L: lento; V: veloce>"
+		},
+		"TipModel": {
+			"text": "TIPMO",
+			"text2": [
+				"Modello",
+				"punta"
+			],
+			"desc": "Seleziona il modello della punta in uso"
+		},
+		"SimpleCalibrationMode": {
+			"text": "SMPCAL",
+			"text2": [
+				"Calibrazione",
+				"semplice"
+			],
+			"desc": "Calibra le rilevazioni di temperatura tramite l'utilizzo di acqua calda"
+		},
+		"AdvancedCalibrationMode": {
+			"text": "ADVCAL",
+			"text2": [
+				"Calibrazione",
+				"avanzata"
+			],
+			"desc": "Calibra le rilevazioni di temperatura attraverso la termocoppia presente nella punta"
+		},
+		"PowerInput": {
+			"text": "PWRW",
+			"text2": [
+				"Potenza",
+				"alimentaz"
+			],
+			"desc": "Imposta la potenza massima erogabile dall'alimentatore in uso"
+		}
+	}
+}

Translation Editor/translation_lt.json

@@ -0,0 +1,234 @@
+{
+	"languageCode": "LT",
+	"languageLocalName": "Lietuvių",
+	"cyrillicGlyphs": false,
+	"messages": {
+		"SettingsCalibrationDone": "Kalibracija atlikta!",
+		"SettingsCalibrationWarning": "Prieš tęsdami įsitikinkite, kad antgalis yra kambario temperatūros!",
+		"SettingsResetWarning": "Ar norite atstatyti nustatymus į numatytas reikšmes?",
+		"UVLOWarningString": "MAŽ VOLT",
+		"UndervoltageString": "Žema įtampa",
+		"InputVoltageString": "Įvestis V: ",
+		"WarningTipTempString": "Antgl Temp: ",
+		"BadTipString": "BLOG ANT",
+		"SleepingSimpleString": "Zzzz",
+		"SleepingAdvancedString": "Miegu...",
+		"WarningSimpleString": "KRŠ!",
+		"WarningAdvancedString": "ANTGALIS KARŠTAS",
+		"SleepingTipAdvancedString": "Antgl:",
+		"IdleTipString": "Ant:",
+		"IdleSetString": " Nust:",
+		"TipDisconnectedString": "ANTGAL ATJUNGTAS",
+		"SolderingAdvancedPowerPrompt": "Maitinimas: ",
+		"OffString": "Išj",
+		"ResetOKMessage":"Reset OK"
+	},
+	"characters": {
+		"SettingRightChar": "D",
+		"SettingLeftChar": "K",
+		"SettingAutoChar": "A",
+		"SettingFastChar": "T",
+		"SettingSlowChar": "N"
+	},
+	"menuDouble": true,
+	"menuGroups": {
+		"SolderingMenu": {
+			"text2": [
+				"Litavimo",
+				"nustatymai"
+			],
+			"desc": "Litavimo nustatymai"
+		},
+		"PowerSavingMenu": {
+			"text2": [
+				"Miego",
+				"režimai"
+			],
+			"desc": "Energijos vartojimo nustatymai"
+		},
+		"UIMenu": {
+			"text2": [
+				"Naudotojo",
+				"sąsaja"
+			],
+			"desc": "Naudotojo sąsajos nustatymai"
+		},
+		"AdvancedMenu": {
+			"text2": [
+				"Išplėstin.",
+				"nustatymai"
+			],
+			"desc": "Išplėstiniai nustatymai"
+		}
+	},
+	"menuOptions": {
+		"PowerSource": {
+			"text": "",
+			"text2": [
+				"Maitinimo",
+				"šaltinis"
+			],
+			"desc": "Išjungimo įtampa. <DC 10V arba celių (S) kiekis (3.3V per celę)>"
+		},
+		"SleepTemperature": {
+			"text": "",
+			"text2": [
+				"Miego",
+				"temperat."
+			],
+			"desc": "Miego temperatūra <C>"
+		},
+		"SleepTimeout": {
+			"text": "",
+			"text2": [
+				"Miego",
+				"laikas"
+			],
+			"desc": "Miego laikas <minutės/sekundės>"
+		},
+		"ShutdownTimeout": {
+			"text": "",
+			"text2": [
+				"Išjungimo",
+				"laikas"
+			],
+			"desc": "Išjungimo laikas <minutės>"
+		},
+		"MotionSensitivity": {
+			"text": "",
+			"text2": [
+				"Jautrumas",
+				"judesiui"
+			],
+			"desc": "Jautrumas judesiui <0 - išjungta, 1 - mažiausias, 9 - didžiausias>"
+		},
+		"TemperatureUnit": {
+			"text": "",
+			"text2": [
+				"Temperatūros",
+				"vienetai"
+			],
+			"desc": "Temperatūros vienetai <C - Celsijus, F - Farenheitas>"
+		},
+		"AdvancedIdle": {
+			"text": "",
+			"text2": [
+				"Detalus lauki",
+				"mo ekranas"
+			],
+			"desc": "Ar rodyti papildomą informaciją mažesniu šriftu laukimo ekrane"
+		},
+		"DisplayRotation": {
+			"text": "",
+			"text2": [
+				"Ekrano",
+				"orientacija"
+			],
+			"desc": "Ekrano orientacija <A - automatinė, K - kairiarankiams, D - dešiniarankiams>"
+		},
+		"BoostEnabled": {
+			"text": "",
+			"text2": [
+				"Turbo režimas",
+				"įjungtas"
+			],
+			"desc": "Ar lituojant viršutinis mygtukas įjungia turbo režimą"
+		},
+		"BoostTemperature": {
+			"text": "",
+			"text2": [
+				"Turbo",
+				"temperat."
+			],
+			"desc": "Temperatūra turbo režimu"
+		},
+		"AutoStart": {
+			"text": "",
+			"text2": [
+				"Auto",
+				"paleidimas"
+			],
+			"desc": "Ar pradėti kaitininti iš karto įjungus lituoklį"
+		},
+		"CooldownBlink": {
+			"text": "",
+			"text2": [
+				"Atvėsimo",
+				"mirksėjimas"
+			],
+			"desc": "Ar mirksėti temperatūrą ekrane kol vėstantis antgalis vis dar karštas"
+		},
+		"TemperatureCalibration": {
+			"text": "",
+			"text2": [
+				"Kalibruoti",
+				"temperatūrą?"
+			],
+			"desc": "Antgalio temperatūros kalibravimas"
+		},
+		"SettingsReset": {
+			"text": "",
+			"text2": [
+				"Atstatyti",
+				"nustatymus?"
+			],
+			"desc": "Nustatyti nustatymus iš naujo"
+		},
+		"VoltageCalibration": {
+			"text": "",
+			"text2": [
+				"Kalibruoti",
+				"įvesties įtampą?"
+			],
+			"desc": "Įvesties įtampos kalibravimas. Trumpai paspauskite, norėdami nustatyti, ilgai paspauskite, kad išeitumėte"
+		},
+		"AdvancedSoldering": {
+			"text": "",
+			"text2": [
+				"Detalus lita-",
+				"vimo ekranas"
+			],
+			"desc": "Ar rodyti išsamią informaciją lituojant"
+		},
+		"ScrollingSpeed": {
+			"text": "",
+			"text2": [
+				"Greitas apr",
+				"ašym. slink"
+			],
+			"desc": "Greitis, kuriuo šis tekstas slenka"
+		},
+		"TipModel": {
+			"text": "TIPMO",
+			"text2": [
+				"Antgalio",
+				"modelis"
+			],
+			"desc": "Antgalio modelio pasirinkimas"
+		},
+		"SimpleCalibrationMode": {
+			"text": "SMPCAL",
+			"text2": [
+				"Paprasta",
+				"kalibracija"
+			],
+			"desc": "Paprasta kalibracija naudojant karštą vandienį"
+		},
+		"AdvancedCalibrationMode": {
+			"text": "ADVCAL",
+			"text2": [
+				"Išplėstinė",
+				"kalibracija"
+			],
+			"desc": "Išplėstinė kalibracija naudojant termoelementą"
+		},
+		"PowerInput": {
+			"text": "PWRW",
+			"text2": [
+				"Galia",
+				"vatais"
+			],
+			"desc": "Maitinimo bloko galia vatais"
+		}
+	}
+}

Translation Editor/translation_nl.json

@@ -0,0 +1,234 @@
+{
+	"languageCode": "NL",
+	"languageLocalName": "Nederlands",
+	"cyrillicGlyphs": false,
+	"messages": {
+		"SettingsCalibrationDone": "Calibration done!",
+		"SettingsCalibrationWarning": "Zorg ervoor dat de soldeerpunt op kamertemperatuur is voor je verdergaat!",
+		"SettingsResetWarning": "Ben je zeker dat je alle instellingen naar de standaardwaardes wilt terugzetten?",
+		"UVLOWarningString": "DC LAAG",
+		"UndervoltageString": "Onderspanning",
+		"InputVoltageString": "Input V: ",
+		"WarningTipTempString": "Tip Temp: ",
+		"BadTipString": "DEFECT",
+		"SleepingSimpleString": "Zzz ",
+		"SleepingAdvancedString": "Slaapstand...",
+		"WarningSimpleString": "HEET",
+		"WarningAdvancedString": "!!! TIP HEET !!!",
+		"SleepingTipAdvancedString": "Tip:",
+		"IdleTipString": "Tip:",
+		"IdleSetString": " Set:",
+		"TipDisconnectedString": "TIP LOSGEKOPPELD",
+		"SolderingAdvancedPowerPrompt": "vermogen: ",
+		"OffString": "Off",
+		"ResetOKMessage":"Reset OK"
+	},
+	"characters": {
+		"SettingRightChar": "R",
+		"SettingLeftChar": "L",
+		"SettingAutoChar": "A",
+		"SettingFastChar": "F",
+		"SettingSlowChar": "S"
+	},
+	"menuDouble": true,
+	"menuGroups": {
+		"SolderingMenu": {
+			"text2": [
+				"Soldeer",
+				"Instellingen"
+			],
+			"desc": "Soldeerinstellingen"
+		},
+		"PowerSavingMenu": {
+			"text2": [
+				"Slaap",
+				"Modes"
+			],
+			"desc": "Batterijbesparingsinstellingen"
+		},
+		"UIMenu": {
+			"text2": [
+				"Gebruikers-",
+				"Interface"
+			],
+			"desc": "Gebruikersinterface Instellingen"
+		},
+		"AdvancedMenu": {
+			"text2": [
+				"geavanceerde",
+				"Instellingen"
+			],
+			"desc": "geavanceerde Instellingen"
+		}
+	},
+	"menuOptions": {
+		"PowerSource": {
+			"text": "",
+			"text2": [
+				"Spannings-",
+				"bron"
+			],
+			"desc": "Spanningsbron. Stelt drempelspanning in. <DC 10V> <S 3.3V per cel>"
+		},
+		"SleepTemperature": {
+			"text": "",
+			"text2": [
+				"Slaap",
+				"temp"
+			],
+			"desc": "Temperatuur in slaapstand <C>"
+		},
+		"SleepTimeout": {
+			"text": "",
+			"text2": [
+				"Slaap",
+				"time-out"
+			],
+			"desc": "Slaapstand time-out <Minuten/Seconden>"
+		},
+		"ShutdownTimeout": {
+			"text": "",
+			"text2": [
+				"Uitschakel",
+				"time-out"
+			],
+			"desc": "Automatisch afsluiten time-out <Minuten>"
+		},
+		"MotionSensitivity": {
+			"text": "",
+			"text2": [
+				"Bewegings-",
+				"gevoeligheid"
+			],
+			"desc": "Bewegingsgevoeligheid <0.uit 1.minst gevoelig 9.meest gevoelig>"
+		},
+		"TemperatureUnit": {
+			"text": "",
+			"text2": [
+				"Temperatuur",
+				"eenheid"
+			],
+			"desc": "Temperatuureenheid <C=Celsius F=Fahrenheit>"
+		},
+		"AdvancedIdle": {
+			"text": "",
+			"text2": [
+				"Gedetailleerd",
+				"slaapscherm"
+			],
+			"desc": "Gedetailleerde informatie weergeven in een kleiner lettertype op het slaapscherm."
+		},
+		"DisplayRotation": {
+			"text": "",
+			"text2": [
+				"Scherm-",
+				"oriëntatie"
+			],
+			"desc": "Schermoriëntatie <A. Automatisch L. Linkshandig R. Rechtshandig>"
+		},
+		"BoostEnabled": {
+			"text": "",
+			"text2": [
+				"Boostmodes",
+				"ingeschakeld?"
+			],
+			"desc": "Soldeerbout gaat naar een hogere boost-temperatuur wanneer de voorste knop ingedrukt is."
+		},
+		"BoostTemperature": {
+			"text": "",
+			"text2": [
+				"Boost",
+				"temp"
+			],
+			"desc": "Temperatuur in boostmodes"
+		},
+		"AutoStart": {
+			"text": "",
+			"text2": [
+				"Auto",
+				"start"
+			],
+			"desc": "Breng de soldeerbout direct op temperatuur bij het opstarten. T=Soldeertemperatuur, S=Slaapstand-temperatuur, F=Uit"
+		},
+		"CooldownBlink": {
+			"text": "",
+			"text2": [
+				"Afkoel",
+				"flikker"
+			],
+			"desc": "Temperatuur laten flikkeren in het hoofdmenu als de soldeerpunt aan het afkoelen is."
+		},
+		"TemperatureCalibration": {
+			"text": "",
+			"text2": [
+				"Calibreer",
+				"temperatuur?"
+			],
+			"desc": "Temperatuursafwijking van de soldeerpunt calibreren."
+		},
+		"SettingsReset": {
+			"text": "",
+			"text2": [
+				"Instellingen",
+				"resetten?"
+			],
+			"desc": "Alle instellingen terugzetten."
+		},
+		"VoltageCalibration": {
+			"text": "",
+			"text2": [
+				"Calibreer",
+				"input-voltage?"
+			],
+			"desc": "VIN Calibreren. Knoppen lang ingedrukt houden om te bevestigen."
+		},
+		"AdvancedSoldering": {
+			"text": "",
+			"text2": [
+				"Gedetailleerd",
+				"soldeerscherm"
+			],
+			"desc": "Gedetailleerde informatie weergeven in een kleiner lettertype op het soldeerscherm."
+		},
+		"ScrollingSpeed": {
+			"text": "",
+			"text2": [
+				"Scroll",
+				"snelheid"
+			],
+			"desc": "Snelheid waarmee de tekst scrolt."
+		},
+		"TipModel": {
+			"text": "TIPMO",
+			"text2": [
+				"Tip",
+				"Model"
+			],
+			"desc": "Tip Model selection"
+		},
+		"SimpleCalibrationMode": {
+			"text": "SMPCAL",
+			"text2": [
+				"Simple",
+				"Calibration"
+			],
+			"desc": "Simple Calibration using Hot water"
+		},
+		"AdvancedCalibrationMode": {
+			"text": "ADVCAL",
+			"text2": [
+				"Advanced",
+				"Calibration"
+			],
+			"desc": "Advanced calibration using thermocouple on the tip"
+		},
+		"PowerInput": {
+			"text": "PWRW",
+			"text2": [
+				"Power",
+				"Wattage"
+			],
+			"desc": "Power Wattage of the power adapter used"
+		}
+	}
+}

Translation Editor/translation_nl_be.json

@@ -0,0 +1,234 @@
+{
+	"languageCode": "NL_BE",
+	"languageLocalName": "Vlaams",
+	"cyrillicGlyphs": false,
+	"messages": {
+		"SettingsCalibrationDone": "Gecalibreerd!",
+		"SettingsCalibrationWarning": "Zorg vooraf dat de punt op kamertemperatuur is!",
+		"SettingsResetWarning": "Ben je zeker dat je alle standaardwaarden wil resetten?",
+		"UVLOWarningString": "Voedingsspanning LAAG",
+		"UndervoltageString": "Onderspanning",
+		"InputVoltageString": "Voedingsspanning: ",
+		"WarningTipTempString": "Punt Temp: ",
+		"BadTipString": "DEFECT",
+		"SleepingSimpleString": "Zzz ",
+		"SleepingAdvancedString": "Slaapstand...",
+		"WarningSimpleString": "HEET",
+		"WarningAdvancedString": "!!! PUNT HEET !!!",
+		"SleepingTipAdvancedString": "Punt:",
+		"IdleTipString": "Punt:",
+		"IdleSetString": "Stel in:",
+		"TipDisconnectedString": "Punt ONTKOPPELD",
+		"SolderingAdvancedPowerPrompt": "Vermogen: ",
+		"OffString": "Uit",
+		"ResetOKMessage":"Reset OK"
+	},
+	"characters": {
+		"SettingRightChar": "R",
+		"SettingLeftChar": "L",
+		"SettingAutoChar": "A",
+		"SettingFastChar": "S",
+		"SettingSlowChar": "T"
+	},
+	"menuDouble": true,
+	"menuGroups": {
+		"SolderingMenu": {
+			"text2": [
+				"Soldeer",
+				"Instellingen"
+			],
+			"desc": "Soldeerinstellingen"
+		},
+		"PowerSavingMenu": {
+			"text2": [
+				"Slaap",
+				"standen"
+			],
+			"desc": "Batterijspaarstanden"
+		},
+		"UIMenu": {
+			"text2": [
+				"Gebruikers-",
+				"Interface"
+			],
+			"desc": "Gebruikersinterface Instellingen"
+		},
+		"AdvancedMenu": {
+			"text2": [
+				"Gevorderde",
+				"Instellingen"
+			],
+			"desc": "Gevorderde Instellingen"
+		}
+	},
+	"menuOptions": {
+		"PowerSource": {
+			"text": "",
+			"text2": [
+				"Spannings-",
+				"bron"
+			],
+			"desc": "Spanningsbron. Stelt minimumspanning in. <DC 10V> <S 3.3V per cel>"
+		},
+		"SleepTemperature": {
+			"text": "",
+			"text2": [
+				"Slaap",
+				"temp"
+			],
+			"desc": "Temperatuur in slaapstand <°C>"
+		},
+		"SleepTimeout": {
+			"text": "",
+			"text2": [
+				"Slaap",
+				"time-out"
+			],
+			"desc": "Slaapstand time-out <Minuten/Seconden>"
+		},
+		"ShutdownTimeout": {
+			"text": "",
+			"text2": [
+				"Uitschakel",
+				"time-out"
+			],
+			"desc": "Automatisch afsluiten time-out <Minuten>"
+		},
+		"MotionSensitivity": {
+			"text": "",
+			"text2": [
+				"Bewegings-",
+				"gevoeligheid"
+			],
+			"desc": "Bewegingsgevoeligheid <0.uit 1.minst gevoelig 9.meest gevoelig>"
+		},
+		"TemperatureUnit": {
+			"text": "",
+			"text2": [
+				"Temperatuur",
+				"schaal"
+			],
+			"desc": "Temperatuurschaal <°C=Celsius °F=Fahrenheit>"
+		},
+		"AdvancedIdle": {
+			"text": "",
+			"text2": [
+				"Gedetailleerd",
+				"slaapscherm"
+			],
+			"desc": "Gedetailleerde informatie in een kleiner lettertype in het slaapscherm."
+		},
+		"DisplayRotation": {
+			"text": "",
+			"text2": [
+				"Scherm-",
+				"oriëntatie"
+			],
+			"desc": "Schermoriëntatie <A. Automatisch L. Linkshandig R. Rechtshandig>"
+		},
+		"BoostEnabled": {
+			"text": "",
+			"text2": [
+				"Temperatuurverhoging",
+				"ingeschakeld?"
+			],
+			"desc": "Temperatuur verhoogt als voorste knop is ingedrukt"
+		},
+		"BoostTemperature": {
+			"text": "",
+			"text2": [
+				"Verhogings",
+				"temp"
+			],
+			"desc": "Verhogingstemperatuur"
+		},
+		"AutoStart": {
+			"text": "",
+			"text2": [
+				"Auto",
+				"start"
+			],
+			"desc": "Breng de soldeerbout op temperatuur bij het opstarten. T=Soldeertemperatuur, S=Slaapstand-temperatuur, F=Uit"
+		},
+		"CooldownBlink": {
+			"text": "",
+			"text2": [
+				"Afkoel",
+				"knipper"
+			],
+			"desc": "Temperatuur knippert in hoofdmenu tijdens afkoeling."
+		},
+		"TemperatureCalibration": {
+			"text": "",
+			"text2": [
+				"Calibreer",
+				"temperatuur?"
+			],
+			"desc": "Temperatuur van de punt calibreren."
+		},
+		"SettingsReset": {
+			"text": "",
+			"text2": [
+				"Instellingen",
+				"resetten?"
+			],
+			"desc": "Alle instellingen resetten."
+		},
+		"VoltageCalibration": {
+			"text": "",
+			"text2": [
+				"Calibreer",
+				"voedingsspanning?"
+			],
+			"desc": "VIN Calibreren. Bevestigen door knoppen lang in te drukken."
+		},
+		"AdvancedSoldering": {
+			"text": "",
+			"text2": [
+				"Gedetailleerd",
+				"soldeerscherm"
+			],
+			"desc": "Gedetailleerde informatie in kleiner lettertype in soldeerscherm."
+		},
+		"ScrollingSpeed": {
+			"text": "",
+			"text2": [
+				"Scrol",
+				"snelheid"
+			],
+			"desc": "Scrolsnelheid van de tekst."
+		},
+		"TipModel": {
+			"text": "PUNTMO",
+			"text2": [
+				"Punt",
+				"Model"
+			],
+			"desc": "Gekozen punt"
+		},
+		"SimpleCalibrationMode": {
+			"text": "SMPCAL",
+			"text2": [
+				"Eenvoudige",
+				"Calibrering"
+			],
+			"desc": "Calibrering met heet water"
+		},
+		"AdvancedCalibrationMode": {
+			"text": "ADVCAL",
+			"text2": [
+				"Gevorderde",
+				"Calibrering"
+			],
+			"desc": "Calibrering met thermokoppel"
+		},
+		"PowerInput": {
+			"text": "PWRW",
+			"text2": [
+				"Vermogen",
+				"Watt"
+			],
+			"desc": "Vermogen van de adapter"
+		}
+	}
+}

Translation Editor/translation_no.json

@@ -0,0 +1,234 @@
+{
+	"languageCode": "NO",
+	"languageLocalName": "Norsk",
+	"cyrillicGlyphs": false,
+	"messages": {
+		"SettingsCalibrationDone": "Calibration done!",
+		"SettingsCalibrationWarning": "Sørg for at loddespissen har romtemperatur før du fortsetter!",
+		"SettingsResetWarning": "Er du sikker på at du vil tilbakestille til standardinnstillinger?",
+		"UVLOWarningString": "Lavspenn",
+		"UndervoltageString": "Underspenning",
+		"InputVoltageString": "Innspenn.: ",
+		"WarningTipTempString": "Spisstemp: ",
+		"BadTipString": "BAD TIP",
+		"SleepingSimpleString": "Zzzz",
+		"SleepingAdvancedString": "Dvale...",
+		"WarningSimpleString": "Varm",
+		"WarningAdvancedString": "VARM SPISS!",
+		"SleepingTipAdvancedString": "Spiss:",
+		"IdleTipString": "Spiss:",
+		"IdleSetString": "Set:",
+		"TipDisconnectedString": "SPISS FRAKOBLET",
+		"SolderingAdvancedPowerPrompt": "Effekt: ",
+		"OffString": "Av",
+		"ResetOKMessage":"Reset OK"
+	},
+	"characters": {
+		"SettingRightChar": "H",
+		"SettingLeftChar": "V",
+		"SettingAutoChar": "A",
+		"SettingFastChar": "H",
+		"SettingSlowChar": "L"
+	},
+	"menuDouble": false,
+	"menuGroups": {
+		"SolderingMenu": {
+			"text2": [
+				"Lodde-",
+				"innst."
+			],
+			"desc": "Loddeinnstillinger"
+		},
+		"PowerSavingMenu": {
+			"text2": [
+				"Dvale-",
+				"innst."
+			],
+			"desc": "Dvaleinnstillinger"
+		},
+		"UIMenu": {
+			"text2": [
+				"Bruker-",
+				"grensesn."
+			],
+			"desc": "Brukergrensesnitt-innstillinger"
+		},
+		"AdvancedMenu": {
+			"text2": [
+				"Avanserte",
+				"valg"
+			],
+			"desc": "Avanserte valg"
+		}
+	},
+	"menuOptions": {
+		"PowerSource": {
+			"text": "Kilde",
+			"text2": [
+				"",
+				""
+			],
+			"desc": "Strømforsyning. Sett nedre spenning for automatisk nedstenging. <DC 10V <S 3.3V per celle"
+		},
+		"SleepTemperature": {
+			"text": "DTmp",
+			"text2": [
+				"",
+				""
+			],
+			"desc": "Dvaletemperatur <C"
+		},
+		"SleepTimeout": {
+			"text": "DTid",
+			"text2": [
+				"",
+				""
+			],
+			"desc": "Tid før dvale <Minutter/Sekunder"
+		},
+		"ShutdownTimeout": {
+			"text": "AvTid",
+			"text2": [
+				"",
+				""
+			],
+			"desc": "Tid før automatisk nedstenging <Minutter"
+		},
+		"MotionSensitivity": {
+			"text": "BSensr",
+			"text2": [
+				"",
+				""
+			],
+			"desc": "Bevegelsesfølsomhet <0.Inaktiv 1.Minst følsom 9.Mest følsom"
+		},
+		"TemperatureUnit": {
+			"text": "TmpEnh",
+			"text2": [
+				"",
+				""
+			],
+			"desc": "Temperaturskala <C=Celsius F=Fahrenheit"
+		},
+		"AdvancedIdle": {
+			"text": "AvDvSk",
+			"text2": [
+				"",
+				""
+			],
+			"desc": "Vis detaljert informasjon med liten skrift på dvaleskjermen."
+		},
+		"DisplayRotation": {
+			"text": "SkRetn",
+			"text2": [
+				"",
+				""
+			],
+			"desc": "Skjermretning <A. Automatisk V. Venstrehendt H. Høyrehendt"
+		},
+		"BoostEnabled": {
+			"text": "Kraft",
+			"text2": [
+				"",
+				""
+			],
+			"desc": "Frontknappen aktiverer kraftfunksjonen, 450C ved lodding"
+		},
+		"BoostTemperature": {
+			"text": "KTmp",
+			"text2": [
+				"",
+				""
+			],
+			"desc": "Temperatur i \"kraft\"-modus"
+		},
+		"AutoStart": {
+			"text": "AStart",
+			"text2": [
+				"",
+				""
+			],
+			"desc": "Start automatisk med lodding når strøm kobles til. L=Lodding, D=Dvale, I=Inaktiv"
+		},
+		"CooldownBlink": {
+			"text": "KjBlnk",
+			"text2": [
+				"",
+				""
+			],
+			"desc": "Blink temperaturen på skjermen mens spissen fortsatt er varm."
+		},
+		"TemperatureCalibration": {
+			"text": "TempKal?",
+			"text2": [
+				"",
+				""
+			],
+			"desc": "Kalibrer spiss-temperatur."
+		},
+		"SettingsReset": {
+			"text": "TilbStl?",
+			"text2": [
+				"",
+				""
+			],
+			"desc": "Tilbakestill alle innstillinger"
+		},
+		"VoltageCalibration": {
+			"text": "KalSpIn?",
+			"text2": [
+				"",
+				""
+			],
+			"desc": "Kalibrer spenning. Knappene justerer. Langt trykk for å gå ut"
+		},
+		"AdvancedSoldering": {
+			"text": "AvLdSk",
+			"text2": [
+				"",
+				""
+			],
+			"desc": "Vis detaljert informasjon ved lodding"
+		},
+		"ScrollingSpeed": {
+			"text": "RullHa",
+			"text2": [
+				"",
+				""
+			],
+			"desc": "Hastigheten på rulletekst"
+		},
+		"TipModel": {
+			"text": "TIPMO",
+			"text2": [
+				"Tip",
+				"Model"
+			],
+			"desc": "Tip Model selection"
+		},
+		"SimpleCalibrationMode": {
+			"text": "SMPCAL",
+			"text2": [
+				"Simple",
+				"Calibration"
+			],
+			"desc": "Simple Calibration using Hot water"
+		},
+		"AdvancedCalibrationMode": {
+			"text": "ADVCAL",
+			"text2": [
+				"Advanced",
+				"Calibration"
+			],
+			"desc": "Advanced calibration using thermocouple on the tip"
+		},
+		"PowerInput": {
+			"text": "PWRW",
+			"text2": [
+				"Power",
+				"Wattage"
+			],
+			"desc": "Power Wattage of the power adapter used"
+		}
+	}
+}

Translation Editor/translation_pl.json

@@ -0,0 +1,234 @@
+{
+	"languageCode": "PL",
+	"languageLocalName": "Polski",
+	"cyrillicGlyphs": false,
+	"messages": {
+		"SettingsCalibrationDone": "Kalibracja udana!",
+		"SettingsCalibrationWarning": "Przed kontynuowaniem upewnij się, że końcówka osiągnela temperature pokojowa!",
+		"SettingsResetWarning": "Czy na pewno chcesz przywrócić ustawienia fabryczne?",
+		"UVLOWarningString": "NISKIE DC",
+		"UndervoltageString": "Pod napięciem",
+		"InputVoltageString": "Wejściowe V: ",
+		"WarningTipTempString": "Temperatura grota: ",
+		"BadTipString": "ZŁY GROT",
+		"SleepingSimpleString": "Zzz!",
+		"SleepingAdvancedString": "Uspienie...",
+		"WarningSimpleString": "HOT!",
+		"WarningAdvancedString": "GORĄCA KOŃCÓWKA!",
+		"SleepingTipAdvancedString": "Grot:",
+		"IdleTipString": "Grot:",
+		"IdleSetString": " Ustaw:",
+		"TipDisconnectedString": "GROT ODŁĄCZONY",
+		"SolderingAdvancedPowerPrompt": "Power: ",
+		"OffString": "Wyłącz",
+		"ResetOKMessage":"Reset OK"
+	},
+	"characters": {
+		"SettingRightChar": "P",
+		"SettingLeftChar": "L",
+		"SettingAutoChar": "A",
+		"SettingFastChar": "F",
+		"SettingSlowChar": "S"
+	},
+	"menuDouble": false,
+	"menuGroups": {
+		"SolderingMenu": {
+			"text2": [
+				"Lutowanie",
+				"Ustawienia"
+			],
+			"desc": "Ustawienia lutownicy"
+		},
+		"PowerSavingMenu": {
+			"text2": [
+				"Uśpienie",
+				"Tryby"
+			],
+			"desc": "Ustawienia oszczędzania energii"
+		},
+		"UIMenu": {
+			"text2": [
+				"Użytkownik",
+				"Interfejs"
+			],
+			"desc": "Ustawienia interfejsu użytkownika"
+		},
+		"AdvancedMenu": {
+			"text2": [
+				"Zaawansowane",
+				"Opcje"
+			],
+			"desc": "Opcje zaawansowane"
+		}
+	},
+	"menuOptions": {
+		"PowerSource": {
+			"text": "PWRSC",
+			"text2": [
+				"Źródło",
+				"zasilania"
+			],
+			"desc": "Źródło zasilania. Ustaw napięcie odcięcia. <DC 10V> <S 3.3V dla ogniw Li>"
+		},
+		"SleepTemperature": {
+			"text": "STMP",
+			"text2": [
+				"Temperatura",
+				"uśpienia"
+			],
+			"desc": "Temperatura uśpienia <°C>"
+		},
+		"SleepTimeout": {
+			"text": "STME",
+			"text2": [
+				"Czas",
+				"uśpienia"
+			],
+			"desc": "Czas uśpienia <Minuty/Sekundy>"
+		},
+		"ShutdownTimeout": {
+			"text": "SHTME",
+			"text2": [
+				"Czas",
+				"wyłączenia"
+			],
+			"desc": "Czas wyłączenia <Minuty>"
+		},
+		"MotionSensitivity": {
+			"text": "MSENSE",
+			"text2": [
+				"Czułość",
+				"ruchu"
+			],
+			"desc": "Czułość ruchu <0.Wyłączona 1.minimalna 9.maksymalna>"
+		},
+		"TemperatureUnit": {
+			"text": "TMPUNT",
+			"text2": [
+				"Jednostka",
+				"temperatury"
+			],
+			"desc": "Jednostka temperatury <C=Celsius F=Fahrenheit>"
+		},
+		"AdvancedIdle": {
+			"text": "ADVIDL",
+			"text2": [
+				"Mniejsza",
+				"czcionka"
+			],
+			"desc": "Wyświetla szczegółowe informacje za pomocą mniejszej czcionki na ekranie bezczynnośći <T = wł., N = wył.>"
+		},
+		"DisplayRotation": {
+			"text": "DSPROT",
+			"text2": [
+				"Orientacja",
+				"wyświetlacza"
+			],
+			"desc": "Orientacja wyświetlacza <A. Automatyczna L. Leworęczna P. Praworęczna>"
+		},
+		"BoostEnabled": {
+			"text": "BOOST",
+			"text2": [
+				"",
+				""
+			],
+			"desc": "Użyj przycisku przedniego w celu zwiększenia temperatury <T = wł., N = wył.>"
+		},
+		"BoostTemperature": {
+			"text": "BTMP",
+			"text2": [
+				"Temperatura",
+				"w trybie boost"
+			],
+			"desc": "Temperatura w trybie \"boost\" "
+		},
+		"AutoStart": {
+			"text": "ASTART",
+			"text2": [
+				"Automatyczne",
+				"uruchamianie"
+			],
+			"desc": "Automatyczne uruchamianie trybu lutowania po włączeniu zasilania. T=Lutowanie, S= Tryb Uspienia ,N=Wyłącz"
+		},
+		"CooldownBlink": {
+			"text": "CLBLNK",
+			"text2": [
+				"Migająca",
+				"temperatura"
+			],
+			"desc": "Temperatura na ekranie miga, gdy grot jest jeszcze gorący. <T = wł., N = wył.>"
+		},
+		"TemperatureCalibration": {
+			"text": "TMP CAL?",
+			"text2": [
+				"Kalibracja",
+				"temp. grota"
+			],
+			"desc": "Kalibracja temperatury grota lutownicy"
+		},
+		"SettingsReset": {
+			"text": "RESET?",
+			"text2": [
+				"",
+				""
+			],
+			"desc": "Zresetuj wszystkie ustawienia"
+		},
+		"VoltageCalibration": {
+			"text": "CAL VIN?",
+			"text2": [
+				"Kalibracja",
+				"napięcia"
+			],
+			"desc": "Kalibracja napięcia wejściowego. Krótkie naciśnięcie, aby ustawić, długie naciśnięcie, aby wyjść."
+		},
+		"AdvancedSoldering": {
+			"text": "ADVSLD",
+			"text2": [
+				"Szczegółowe",
+				"informacje"
+			],
+			"desc": "Wyświetl szczegółowe informacje podczas lutowania <T = wł., N = wył.>"
+		},
+		"ScrollingSpeed": {
+			"text": "DESCSP",
+			"text2": [
+				"Szybkość",
+				"tekstu"
+			],
+			"desc": "Szybkość przewijania tekstu"
+		},
+		"TipModel": {
+			"text": "TIPMO",
+			"text2": [
+				"Model",
+				"grota"
+			],
+			"desc": "Wybór grotu"
+		},
+		"SimpleCalibrationMode": {
+			"text": "SMPCAL",
+			"text2": [
+				"Prosta",
+				"Kalibracja"
+			],
+			"desc": "Prosta kalibracja używając gorącej wody"
+		},
+		"AdvancedCalibrationMode": {
+			"text": "ADVCAL",
+			"text2": [
+				"Zaawansowana",
+				"Kalibracja"
+			],
+			"desc": "Zaawansowana kalibracja za pomocy termopoary na grocie"
+		},
+		"PowerInput": {
+			"text": "PWRW",
+			"text2": [
+				"Moc",
+				"Wattach"
+			],
+			"desc": "Moc używanego zasilacza w Watach"
+		}
+	}
+}

Translation Editor/translation_pt.json

@@ -0,0 +1,234 @@
+{
+	"languageCode": "PT",
+	"languageLocalName": "Português",
+	"cyrillicGlyphs": false,
+	"messages": {
+		"SettingsCalibrationDone": "Calibração terminada!",
+		"SettingsCalibrationWarning": "A ponta deve estar à temperatura ambiente antes de continuar!",
+		"SettingsResetWarning": "Definições de fábrica?",
+		"UVLOWarningString": "DC BAIXO",
+		"UndervoltageString": "Subtensão",
+		"InputVoltageString": "Tensão ",
+		"WarningTipTempString": "Temperatura ",
+		"BadTipString": "ER PONTA",
+		"SleepingSimpleString": "Zzzz",
+		"SleepingAdvancedString": "Repouso...",
+		"WarningSimpleString": "TEMP",
+		"WarningAdvancedString": "TEMP ELEVADA!",
+		"SleepingTipAdvancedString": "Ponta:",
+		"IdleTipString": "Ponta:",
+		"IdleSetString": " Aj:",
+		"TipDisconnectedString": "SEM PONTA",
+		"SolderingAdvancedPowerPrompt": "Power: ",
+		"OffString": "Off",
+		"ResetOKMessage":"Reset OK"
+	},
+	"characters": {
+		"SettingRightChar": "D",
+		"SettingLeftChar": "C",
+		"SettingAutoChar": "A",
+		"SettingFastChar": "R",
+		"SettingSlowChar": "L"
+	},
+	"menuDouble": true,
+	"menuGroups": {
+		"SolderingMenu": {
+			"text2": [
+				"Configurações",
+				"Solda"
+			],
+			"desc": "Configurações de soldagem"
+		},
+		"PowerSavingMenu": {
+			"text2": [
+				"Modos",
+				"Repouso"
+			],
+			"desc": "Configurações de economia de energia"
+		},
+		"UIMenu": {
+			"text2": [
+				"Interface",
+				"Utilizador"
+			],
+			"desc": "Configurações do interface do utilizador"
+		},
+		"AdvancedMenu": {
+			"text2": [
+				"Menu",
+				"Avançado"
+			],
+			"desc": "Opções avançadas"
+		}
+	},
+	"menuOptions": {
+		"PowerSource": {
+			"text": "FONTE",
+			"text2": [
+				"Fonte",
+				"alimentação"
+			],
+			"desc": "Fonte de alimentação. Define a tensão de corte. <DC=10V> <S=3.3V/célula>"
+		},
+		"SleepTemperature": {
+			"text": "TMPE",
+			"text2": [
+				"Temperat.",
+				"repouso"
+			],
+			"desc": "Temperatura de repouso <C>"
+		},
+		"SleepTimeout": {
+			"text": "TMPO",
+			"text2": [
+				"Tempo",
+				"repouso"
+			],
+			"desc": "Tempo para repouso <Minutos/Segundos>"
+		},
+		"ShutdownTimeout": {
+			"text": "DESLI",
+			"text2": [
+				"Tempo",
+				"desligam."
+			],
+			"desc": "Tempo para desligamento <Minutos>"
+		},
+		"MotionSensitivity": {
+			"text": "MOVIME",
+			"text2": [
+				"Sensibilidade",
+				"movimento"
+			],
+			"desc": "Sensibilidade ao movimento <0=Desligado 1=Menor 9=Maior>"
+		},
+		"TemperatureUnit": {
+			"text": "UNIDAD",
+			"text2": [
+				"Unidade",
+				"temperatura"
+			],
+			"desc": "Unidade de temperatura <C=Celsius F=Fahrenheit>"
+		},
+		"AdvancedIdle": {
+			"text": "EM ESPERA",
+			"text2": [
+				"Tela repouso",
+				"avançada"
+			],
+			"desc": "Exibe informações avançadas quando em espera"
+		},
+		"DisplayRotation": {
+			"text": "ORIENT",
+			"text2": [
+				"Orientação",
+				"tela"
+			],
+			"desc": "Orientação da tela <A.utomática C.anhoto D.estro>"
+		},
+		"BoostEnabled": {
+			"text": "TURBO",
+			"text2": [
+				"Modo turbo",
+				"activado"
+			],
+			"desc": "Tecla frontal activa modo \"turbo\""
+		},
+		"BoostTemperature": {
+			"text": "TTMP",
+			"text2": [
+				"Modo turbo",
+				"temperat."
+			],
+			"desc": "Ajuste de temperatura do modo \"turbo\""
+		},
+		"AutoStart": {
+			"text": "MODOAT",
+			"text2": [
+				"Partida",
+				"automática"
+			],
+			"desc": "Aquece a ponta automaticamente ao ligar"
+		},
+		"CooldownBlink": {
+			"text": "RESFRI",
+			"text2": [
+				"Piscar ao",
+				"arrefecer"
+			],
+			"desc": "Faz o valor da temperatura piscar durante o arrefecimento"
+		},
+		"TemperatureCalibration": {
+			"text": "CAL.TEMP",
+			"text2": [
+				"Calibrar",
+				"temperatura"
+			],
+			"desc": "Calibra a temperatura"
+		},
+		"SettingsReset": {
+			"text": "RESET",
+			"text2": [
+				"Reset de",
+				"fábrica?"
+			],
+			"desc": "Reverte todos ajustes"
+		},
+		"VoltageCalibration": {
+			"text": "CAL.VOLT",
+			"text2": [
+				"Calibrar",
+				"tensão"
+			],
+			"desc": "Calibra a tensão de alimentação. Use os botões para ajustar o valor. Mantenha pressionado para sair"
+		},
+		"AdvancedSoldering": {
+			"text": "AVNCAD",
+			"text2": [
+				"Tela trabalho",
+				"avançada"
+			],
+			"desc": "Exibe informações avançadas durante o uso"
+		},
+		"ScrollingSpeed": {
+			"text": "DESCSP",
+			"text2": [
+				"Velocidade",
+				"texto ajuda"
+			],
+			"desc": "Velocidade a que o texto é exibido"
+		},
+		"TipModel": {
+			"text": "MODPNT",
+			"text2": [
+				"Ponta",
+				"Modelo"
+			],
+			"desc": "Selecção de modelo de ponta"
+		},
+		"SimpleCalibrationMode": {
+			"text": "SMPCAL",
+			"text2": [
+				"Calibração",
+				"Simples"
+			],
+			"desc": "Calibração simples com água quente"
+		},
+		"AdvancedCalibrationMode": {
+			"text": "ADVCAL",
+			"text2": [
+				"Calibração",
+				"Avançada"
+			],
+			"desc": "Calibração avançada com um termopar na ponta"
+		},
+		"PowerInput": {
+			"text": "PWRW",
+			"text2": [
+				"Potência",
+				"Fonte"
+			],
+			"desc": "Potência da fonte usada (Watt)"
+		}
+	}
+}

Translation Editor/translation_ru.json

@@ -0,0 +1,234 @@
+{
+	"languageCode": "RU",
+	"languageLocalName": "Русский",
+	"cyrillicGlyphs": true,
+	"messages": {
+		"SettingsCalibrationDone": "Калибровка выполнена!",
+		"SettingsCalibrationWarning": "Убедитесь, что жало остыло до комнатной температуры, прежде чем продолжать!",
+		"SettingsResetWarning": "Вы действительно хотите сбросить настройки до значений по умолчанию?",
+		"UVLOWarningString": "АККУМ--",
+		"UndervoltageString": "Под питанием",
+		"InputVoltageString": "Питание B: ",
+		"WarningTipTempString": "Жало t°: ",
+		"BadTipString": "Жало--",
+		"SleepingSimpleString": "Сон ",
+		"SleepingAdvancedString": "Ожидание...",
+		"WarningSimpleString": " АЙ!",
+		"WarningAdvancedString": "ВНИМАНИЕ ГОРЯЧО",
+		"SleepingTipAdvancedString": "Жало:",
+		"IdleTipString": "Жало:",
+		"IdleSetString": " ->",
+		"TipDisconnectedString": "Жало отключено",
+		"SolderingAdvancedPowerPrompt": "Питание: ",
+		"OffString": "Off",
+		"ResetOKMessage":"Reset OK"
+	},
+	"characters": {
+		"SettingRightChar": "П",
+		"SettingLeftChar": "Л",
+		"SettingAutoChar": "A",
+		"SettingFastChar": "+",
+		"SettingSlowChar": "-"
+	},
+	"menuDouble": true,
+	"menuGroups": {
+		"SolderingMenu": {
+			"text2": [
+				"Параметры",
+				"пайки"
+			],
+			"desc": "Параметры пайки"
+		},
+		"PowerSavingMenu": {
+			"text2": [
+				"Режим",
+				"сна"
+			],
+			"desc": "Параметры экономии энергии"
+		},
+		"UIMenu": {
+			"text2": [
+				"Пользовател",
+				"интерфейс"
+			],
+			"desc": "Параметры пользовательского интерфейса"
+		},
+		"AdvancedMenu": {
+			"text2": [
+				"Дополнител.",
+				"параметры"
+			],
+			"desc": "Дополнительные параметры"
+		}
+	},
+	"menuOptions": {
+		"PowerSource": {
+			"text": "ИстП",
+			"text2": [
+				"Источник",
+				"питания"
+			],
+			"desc": "Источник питания. Установка напряжения отключения. <DC 10V> <S 3.3 V на батарею>"
+		},
+		"SleepTemperature": {
+			"text": "Тожд",
+			"text2": [
+				"Темпер.",
+				"сна"
+			],
+			"desc": "Температура режима ожидания <С>"
+		},
+		"SleepTimeout": {
+			"text": "Вожд",
+			"text2": [
+				"Таймаут",
+				"сна"
+			],
+			"desc": "Время до перехода в режим ожидания <Минуты>"
+		},
+		"ShutdownTimeout": {
+			"text": "Тоткл",
+			"text2": [
+				"Время до",
+				"отключения"
+			],
+			"desc": "Время до отключения <Минуты>"
+		},
+		"MotionSensitivity": {
+			"text": "ЧувсДв",
+			"text2": [
+				"Чувст. сенсо-",
+				"ра движения"
+			],
+			"desc": "Акселерометр <0. Выкл. 1. мин. чувствительный 9. макс. чувствительный>"
+		},
+		"TemperatureUnit": {
+			"text": "ЕдТемп",
+			"text2": [
+				"Формат темпе-",
+				"ратуры(C°/F°)"
+			],
+			"desc": "В чем измерять температуру"
+		},
+		"AdvancedIdle": {
+			"text": "ИнфОжд",
+			"text2": [
+				"Подробный ре-",
+				"жим ожидания"
+			],
+			"desc": "Показывать детальную информацию маленьким шрифтом на домашнем экране"
+		},
+		"DisplayRotation": {
+			"text": "ПовЭкр",
+			"text2": [
+				"Автоповорот",
+				"экрана"
+			],
+			"desc": "Ориентация дисплея <A. Автоматический, Л. Левая рука, П. Правая рука>"
+		},
+		"BoostEnabled": {
+			"text": "Турбо",
+			"text2": [
+				"Режим",
+				"Турбо"
+			],
+			"desc": "Турбо-режим при удержании кнопки А при пайке "
+		},
+		"BoostTemperature": {
+			"text": "Ттур",
+			"text2": [
+				"Темпер.",
+				"Турбо"
+			],
+			"desc": "Температура в турбо-режиме"
+		},
+		"AutoStart": {
+			"text": "Астарт",
+			"text2": [
+				"Горячий",
+				"старт"
+			],
+			"desc": "Автоматический запуск паяльника при включении питания. T=Нагрев, S=Режим ожидания,F=Выкл."
+		},
+		"CooldownBlink": {
+			"text": "Охлажд",
+			"text2": [
+				"Показ t° при",
+				"остывании"
+			],
+			"desc": "Показывать температуру на экране охлаждения, пока жало остается горячим."
+		},
+		"TemperatureCalibration": {
+			"text": "КалибрТ",
+			"text2": [
+				"Калибровка",
+				"температуры"
+			],
+			"desc": "Калибровка термодатчика."
+		},
+		"SettingsReset": {
+			"text": "СБРОС?",
+			"text2": [
+				"Сбросить все",
+				"настройки?"
+			],
+			"desc": "Сброс всех настроек."
+		},
+		"VoltageCalibration": {
+			"text": "КалибрU?",
+			"text2": [
+				"Калибровка",
+				"напряжения"
+			],
+			"desc": "Калибровка напряжения входа. Настройка кнопками, нажать и удержать чтобы завершить."
+		},
+		"AdvancedSoldering": {
+			"text": "ИнфПай",
+			"text2": [
+				"Подробный ре-",
+				"жим пайки"
+			],
+			"desc": "Показывать детальную информацию при пайке."
+		},
+		"ScrollingSpeed": {
+			"text": "DESCSP",
+			"text2": [
+				"Скорость",
+				"текста"
+			],
+			"desc": "Скорость прокрутки текста"
+		},
+		"TipModel": {
+			"text": "TIPMO",
+			"text2": [
+				"Модель",
+				"жало"
+			],
+			"desc": "Выбор модели жало"
+		},
+		"SimpleCalibrationMode": {
+			"text": "SMPCAL",
+			"text2": [
+				"Простая",
+				"калибровка"
+			],
+			"desc": "Простая калибровка с использованием горячей воды"
+		},
+		"AdvancedCalibrationMode": {
+			"text": "ADVCAL",
+			"text2": [
+				"Подробная",
+				"калибровка"
+			],
+			"desc": "Калибровка с помощью термопары"
+		},
+		"PowerInput": {
+			"text": "PWRW",
+			"text2": [
+				"Power",
+				"Wattage"
+			],
+			"desc": "Power Wattage of the power adapter used"
+		}
+	}
+}

Translation Editor/translation_sk.json

@@ -0,0 +1,234 @@
+{
+	"languageCode": "SK",
+	"languageLocalName": "Slovenský",
+	"cyrillicGlyphs": false,
+	"messages": {
+		"SettingsCalibrationDone": "Calibration done!",
+		"SettingsCalibrationWarning": "Najprv sa prosim uistite, ze hrot ma izbovu teplotu!",
+		"SettingsResetWarning": "Are you sure to reset settings to default values?",
+		"UVLOWarningString": "DC LOW",
+		"UndervoltageString": "Undervoltage",
+		"InputVoltageString": "Input V: ",
+		"WarningTipTempString": "Tip Temp: ",
+		"BadTipString": "BAD TIP",
+		"SleepingSimpleString": "Chrr",
+		"SleepingAdvancedString": "Kludovy rezim...",
+		"WarningSimpleString": "HOT!",
+		"WarningAdvancedString": "HROT JE HORUCI !",
+		"SleepingTipAdvancedString": "Tip:",
+		"IdleTipString": "Tip:",
+		"IdleSetString": " Set:",
+		"TipDisconnectedString": "TIP DISCONNECTED",
+		"SolderingAdvancedPowerPrompt": "Power: ",
+		"OffString": "Off",
+		"ResetOKMessage":"Reset OK"
+	},
+	"characters": {
+		"SettingRightChar": "R",
+		"SettingLeftChar": "L",
+		"SettingAutoChar": "A",
+		"SettingFastChar": "F",
+		"SettingSlowChar": "S"
+	},
+	"menuDouble": false,
+	"menuGroups": {
+		"SolderingMenu": {
+			"text2": [
+				"Soldering",
+				"Settings"
+			],
+			"desc": "Soldering settings"
+		},
+		"PowerSavingMenu": {
+			"text2": [
+				"Sleep",
+				"Modes"
+			],
+			"desc": "Power Saving Settings"
+		},
+		"UIMenu": {
+			"text2": [
+				"User",
+				"Interface"
+			],
+			"desc": "User Interface settings"
+		},
+		"AdvancedMenu": {
+			"text2": [
+				"Advanced",
+				"Options"
+			],
+			"desc": "Advanced options"
+		}
+	},
+	"menuOptions": {
+		"PowerSource": {
+			"text": "PWRSC",
+			"text2": [
+				"",
+				""
+			],
+			"desc": "Zdroj napatia. Nastavit napatie pre vypnutie (cutoff)  <DC=10V, nS=n*3.3V pre LiIon clanky>"
+		},
+		"SleepTemperature": {
+			"text": "STMP",
+			"text2": [
+				"",
+				""
+			],
+			"desc": "Kludova teplota (v nastavenych jednotkach)"
+		},
+		"SleepTimeout": {
+			"text": "STME",
+			"text2": [
+				"",
+				""
+			],
+			"desc": "Kludovy rezim po <sekundach/minutach>"
+		},
+		"ShutdownTimeout": {
+			"text": "SHTME",
+			"text2": [
+				"",
+				""
+			],
+			"desc": "Cas na vypnutie <minuty>"
+		},
+		"MotionSensitivity": {
+			"text": "MSENSE",
+			"text2": [
+				"",
+				""
+			],
+			"desc": "Citlivost detekcie pohybu <0=Vyp, 1=Min ... 9=Max>"
+		},
+		"TemperatureUnit": {
+			"text": "TMPUNT",
+			"text2": [
+				"",
+				""
+			],
+			"desc": "Jednotky merania teploty <C=stupne Celzia, F=stupne Fahrenheita>"
+		},
+		"AdvancedIdle": {
+			"text": "ADVIDL",
+			"text2": [
+				"",
+				""
+			],
+			"desc": "Zobrazit detailne informacie v kludovom rezime <T=Zap, F=Vyp>"
+		},
+		"DisplayRotation": {
+			"text": "DSPROT",
+			"text2": [
+				"",
+				""
+			],
+			"desc": "Orientacia displeja <A=Auto, L=Lavak, R=Pravak>"
+		},
+		"BoostEnabled": {
+			"text": "BOOST",
+			"text2": [
+				"",
+				""
+			],
+			"desc": "Povolit tlacidlo pre prudky nahrev <T=Zap, F=Vyp>"
+		},
+		"BoostTemperature": {
+			"text": "BTMP",
+			"text2": [
+				"",
+				""
+			],
+			"desc": "Cielova teplota pre prudky nahrev (v nastavenych jednotkach)"
+		},
+		"AutoStart": {
+			"text": "ASTART",
+			"text2": [
+				"",
+				""
+			],
+			"desc": "Pri starte spustit rezim spajkovania <T=Zap, F=Vyp, S=Spanok>"
+		},
+		"CooldownBlink": {
+			"text": "CLBLNK",
+			"text2": [
+				"",
+				""
+			],
+			"desc": "Blikanie ukazovatela teploty pocas chladnutia hrotu <T=Zap, F=Vyp>"
+		},
+		"TemperatureCalibration": {
+			"text": "TMP CAL?",
+			"text2": [
+				"",
+				""
+			],
+			"desc": "Kalibracia posunu hrotu"
+		},
+		"SettingsReset": {
+			"text": "RESET?",
+			"text2": [
+				"",
+				""
+			],
+			"desc": "Tovarenske nastavenia"
+		},
+		"VoltageCalibration": {
+			"text": "CAL VIN?",
+			"text2": [
+				"",
+				""
+			],
+			"desc": "Kalibracia VIN. Kratke stlacenie meni nastavenie, dlhe stlacenie pre navrat"
+		},
+		"AdvancedSoldering": {
+			"text": "ADVSLD",
+			"text2": [
+				"",
+				""
+			],
+			"desc": "Zobrazenie detailov pocas spajkovania <T=Zap, F=Vyp>"
+		},
+		"ScrollingSpeed": {
+			"text": "DESCSP",
+			"text2": [
+				"",
+				""
+			],
+			"desc": "Speed this text scrolls past at"
+		},
+		"TipModel": {
+			"text": "TIPMO",
+			"text2": [
+				"Tip",
+				"Model"
+			],
+			"desc": "Tip Model selection"
+		},
+		"SimpleCalibrationMode": {
+			"text": "SMPCAL",
+			"text2": [
+				"Simple",
+				"Calibration"
+			],
+			"desc": "Simple Calibration using Hot water"
+		},
+		"AdvancedCalibrationMode": {
+			"text": "ADVCAL",
+			"text2": [
+				"Advanced",
+				"Calibration"
+			],
+			"desc": "Advanced calibration using thermocouple on the tip"
+		},
+		"PowerInput": {
+			"text": "PWRW",
+			"text2": [
+				"Power",
+				"Wattage"
+			],
+			"desc": "Power Wattage of the power adapter used"
+		}
+	}
+}

Translation Editor/translation_sr_cyrl.json

@@ -0,0 +1,234 @@
+{
+	"languageCode": "SR_CYRL",
+	"languageLocalName": "Српски",
+	"cyrillicGlyphs": true,
+	"messages": {
+		"SettingsCalibrationDone": "Калибрација готова",
+		"SettingsCalibrationWarning": "Проверите да ли је врх охлађен на собну температуру пре него што наставите",
+		"SettingsResetWarning": "Да ли заиста желите да вратите поставке на фабричке вредности?",
+		"UVLOWarningString": "НИЗ.НАП.",
+		"UndervoltageString": "ПРЕНИЗАК НАПОН",
+		"InputVoltageString": "Ул. напон: ",
+		"WarningTipTempString": "Темп. врха: ",
+		"BadTipString": "ЛОШ ВРХ",
+		"SleepingSimpleString": "Сан",
+		"SleepingAdvancedString": "Спавање...",
+		"WarningSimpleString": "ВРУЋ",
+		"WarningAdvancedString": "! ОПРЕЗ, ВРУЋЕ !",
+		"SleepingTipAdvancedString": "Врх:",
+		"IdleTipString": "Врх:",
+		"IdleSetString": " / ",
+		"TipDisconnectedString": "ВРХ НИЈЕ СПОЈЕН",
+		"SolderingAdvancedPowerPrompt": "Снага: ",
+		"OffString": "Иск",
+		"ResetOKMessage":"Reset OK"
+	},
+	"characters": {
+		"SettingRightChar": "Д",
+		"SettingLeftChar": "Л",
+		"SettingAutoChar": "А",
+		"SettingFastChar": "Б",
+		"SettingSlowChar": "С"
+	},
+	"menuDouble": true,
+	"menuGroups": {
+		"SolderingMenu": {
+			"text2": [
+				"Поставке",
+				"лемљења"
+			],
+			"desc": "Поставке режима лемљења."
+		},
+		"PowerSavingMenu": {
+			"text2": [
+				"Уштеда",
+				"енергије"
+			],
+			"desc": "Поставке режима мировања."
+		},
+		"UIMenu": {
+			"text2": [
+				"Корисничко",
+				"сучеље"
+			],
+			"desc": "Поставке корисничког сучеља."
+		},
+		"AdvancedMenu": {
+			"text2": [
+				"Напредне",
+				"поставке"
+			],
+			"desc": "Напредне поставке."
+		}
+	},
+	"menuOptions": {
+		"PowerSource": {
+			"text": "Нпјње",
+			"text2": [
+				"Врста",
+				"напајања"
+			],
+			"desc": "Тип напајања; одређује најнижи радни напон. <DC=адаптер (10V), S=батерија (3,3V по ћелији)>"
+		},
+		"SleepTemperature": {
+			"text": "ТСпв",
+			"text2": [
+				"Темп.",
+				"спавања"
+			],
+			"desc": "Температура на коју се спушта лемилица након одређеног времена мировања. <C/F>"
+		},
+		"SleepTimeout": {
+			"text": "ВСпв",
+			"text2": [
+				"Време до",
+				"спавања"
+			],
+			"desc": "Време мировања након кога лемилица спушта температуру. <M=минути, S=секунде>"
+		},
+		"ShutdownTimeout": {
+			"text": "ВГшњ",
+			"text2": [
+				"Време до",
+				"гашења"
+			],
+			"desc": "Време мировања након кога се лемилица гаси. <M=минути>"
+		},
+		"MotionSensitivity": {
+			"text": "ОстПкр",
+			"text2": [
+				"Осетљивост",
+				"на покрет"
+			],
+			"desc": "Осетљивост сензора покрета. <0=искључено, 1=најмање осетљиво, 9=најосетљивије>"
+		},
+		"TemperatureUnit": {
+			"text": "ЈедТмп",
+			"text2": [
+				"Јединица",
+				"температуре"
+			],
+			"desc": "Јединице у којима се приказује температура. <C=целзијус, F=фаренхајт>"
+		},
+		"AdvancedIdle": {
+			"text": "ДтљМир",
+			"text2": [
+				"Детаљи током",
+				"мировања"
+			],
+			"desc": "Приказивање детаљних информација на екрану током мировања."
+		},
+		"DisplayRotation": {
+			"text": "ОрјЕкр",
+			"text2": [
+				"Оријентација",
+				"екрана"
+			],
+			"desc": "Како је окренут екран. <А=аутоматски, Л=за леворуке, Д=за десноруке>"
+		},
+		"BoostEnabled": {
+			"text": "Пјчње",
+			"text2": [
+				"Појачање",
+				"омогућено"
+			],
+			"desc": "Држање предњег тастера током лемљења додатно појачава температуру врха."
+		},
+		"BoostTemperature": {
+			"text": "ТПјч",
+			"text2": [
+				"Темп.",
+				"појачања"
+			],
+			"desc": "Температура врха лемилице у току појачања."
+		},
+		"AutoStart": {
+			"text": "ВрћСта",
+			"text2": [
+				"Врући",
+				"старт"
+			],
+			"desc": "Лемилица одмах по покретању прелази у режим лемљења и греје се."
+		},
+		"CooldownBlink": {
+			"text": "УпзХла",
+			"text2": [
+				"Упозорење",
+				"при хлађењу"
+			],
+			"desc": "Приказ температуре трепће приликом хлађења докле год је врх и даље врућ."
+		},
+		"TemperatureCalibration": {
+			"text": "КалбрТмп",
+			"text2": [
+				"Калибрација",
+				"температуре"
+			],
+			"desc": "Калибрисање одступања температуре врха у односу на дршку."
+		},
+		"SettingsReset": {
+			"text": "ФабрПост",
+			"text2": [
+				"Фабричке",
+				"поставке"
+			],
+			"desc": "Враћање свих поставки на фабричке вредности."
+		},
+		"VoltageCalibration": {
+			"text": "КалбрНап",
+			"text2": [
+				"Калибрација",
+				"улазног напона"
+			],
+			"desc": "Калибрисање улазног напона. Подешава се на тастере; дуги притисак за крај."
+		},
+		"AdvancedSoldering": {
+			"text": "ДтљЛем",
+			"text2": [
+				"Детаљи током",
+				"лемљења"
+			],
+			"desc": "Приказивање детаљних информација на екрану током лемљења."
+		},
+		"ScrollingSpeed": {
+			"text": "БрзПор",
+			"text2": [
+				"Брзина",
+				"порука"
+			],
+			"desc": "Брзина кретања описних порука попут ове. <С=споро, Б=брзо>"
+		},
+		"TipModel": {
+			"text": "МоделВрх",
+			"text2": [
+				"Модел",
+				"врха"
+			],
+			"desc": "Одабир модела лемног врха."
+		},
+		"SimpleCalibrationMode": {
+			"text": "ЈедКалбр",
+			"text2": [
+				"Једноставна",
+				"калибрација"
+			],
+			"desc": "Једноставна калибрација кипућом водом."
+		},
+		"AdvancedCalibrationMode": {
+			"text": "НапКалбр",
+			"text2": [
+				"Напредна",
+				"калибрација"
+			],
+			"desc": "Напредна калибрација помоћу термопара."
+		},
+		"PowerInput": {
+			"text": "УлазСнаг",
+			"text2": [
+				"Улазна",
+				"снага"
+			],
+			"desc": "Снага напајања у ватима."
+		}
+	}
+}

Translation Editor/translation_sr_latn.json

@@ -0,0 +1,234 @@
+{
+	"languageCode": "SR_LATN",
+	"languageLocalName": "Srpski",
+	"cyrillicGlyphs": false,
+	"messages": {
+		"SettingsCalibrationDone": "Kalibracija gotova",
+		"SettingsCalibrationWarning": "Proverite da li je vrh ohlađen na sobnu temperaturu pre nego što nastavite",
+		"SettingsResetWarning": "Da li zaista želite da vratite postavke na fabričke vrednosti?",
+		"UVLOWarningString": "NIZ.NAP.",
+		"UndervoltageString": "PRENIZAK NAPON",
+		"InputVoltageString": "Ul. napon: ",
+		"WarningTipTempString": "Temp. vrha: ",
+		"BadTipString": "LOŠ VRH",
+		"SleepingSimpleString": "Zzz",
+		"SleepingAdvancedString": "Spavanje...",
+		"WarningSimpleString": "VRUĆ",
+		"WarningAdvancedString": "! OPREZ, VRUĆE !",
+		"SleepingTipAdvancedString": "Vrh:",
+		"IdleTipString": "Vrh:",
+		"IdleSetString": " / ",
+		"TipDisconnectedString": "VRH NIJE SPOJEN",
+		"SolderingAdvancedPowerPrompt": "Snaga: ",
+		"OffString": "Isk",
+		"ResetOKMessage":"Reset OK"
+	},
+	"characters": {
+		"SettingRightChar": "D",
+		"SettingLeftChar": "L",
+		"SettingAutoChar": "A",
+		"SettingFastChar": "B",
+		"SettingSlowChar": "S"
+	},
+	"menuDouble": true,
+	"menuGroups": {
+		"SolderingMenu": {
+			"text2": [
+				"Postavke",
+				"lemljenja"
+			],
+			"desc": "Postavke režima lemljenja."
+		},
+		"PowerSavingMenu": {
+			"text2": [
+				"Ušteda",
+				"energije"
+			],
+			"desc": "Postavke režima mirovanja."
+		},
+		"UIMenu": {
+			"text2": [
+				"Korisničko",
+				"sučelje"
+			],
+			"desc": "Postavke korisničkog sučelja."
+		},
+		"AdvancedMenu": {
+			"text2": [
+				"Napredne",
+				"postavke"
+			],
+			"desc": "Napredne postavke."
+		}
+	},
+	"menuOptions": {
+		"PowerSource": {
+			"text": "Npjnj",
+			"text2": [
+				"Vrsta",
+				"napajanja"
+			],
+			"desc": "Tip napajanja; određuje najniži radni napon. <DC=adapter (10V), S=baterija (3,3V po ćeliji)>"
+		},
+		"SleepTemperature": {
+			"text": "TSpv",
+			"text2": [
+				"Temp.",
+				"spavanja"
+			],
+			"desc": "Temperatura na koju se spušta lemilica nakon određenog vremena mirovanja. <C/F>"
+		},
+		"SleepTimeout": {
+			"text": "VSpv",
+			"text2": [
+				"Vreme do",
+				"spavanja"
+			],
+			"desc": "Vreme mirovanja nakon koga lemilica spušta temperaturu. <M=minuti, S=sekunde>"
+		},
+		"ShutdownTimeout": {
+			"text": "VGšnj",
+			"text2": [
+				"Vreme do",
+				"gašenja"
+			],
+			"desc": "Vreme mirovanja nakon koga se lemilica gasi. <M=minuti>"
+		},
+		"MotionSensitivity": {
+			"text": "OstPkr",
+			"text2": [
+				"Osetljivost",
+				"na pokret"
+			],
+			"desc": "Osetljivost senzora pokreta. <0=isključeno, 1=najmanje osetljivo, 9=najosetljivije>"
+		},
+		"TemperatureUnit": {
+			"text": "JedTmp",
+			"text2": [
+				"Jedinica",
+				"temperature"
+			],
+			"desc": "Jedinice u kojima se prikazuje temperatura. <C=celzijus, F=farenhajt>"
+		},
+		"AdvancedIdle": {
+			"text": "DtlMir",
+			"text2": [
+				"Detalji tokom",
+				"mirovanja"
+			],
+			"desc": "Prikazivanje detaljnih informacija na ekranu tokom mirovanja."
+		},
+		"DisplayRotation": {
+			"text": "OrjEkr",
+			"text2": [
+				"Orijentacija",
+				"ekrana"
+			],
+			"desc": "Kako je okrenut ekran. <A=automatski, L=za levoruke, D=za desnoruke>"
+		},
+		"BoostEnabled": {
+			"text": "Pjčnj",
+			"text2": [
+				"Pojačanje",
+				"omogućeno"
+			],
+			"desc": "Držanje prednjeg tastera tokom lemljenja dodatno pojačava temperaturu vrha."
+		},
+		"BoostTemperature": {
+			"text": "TPjč",
+			"text2": [
+				"Temp.",
+				"pojačanja"
+			],
+			"desc": "Temperatura vrha lemilice u toku pojačanja."
+		},
+		"AutoStart": {
+			"text": "VrćSta",
+			"text2": [
+				"Vrući",
+				"start"
+			],
+			"desc": "Lemilica odmah po pokretanju prelazi u režim lemljenja i greje se."
+		},
+		"CooldownBlink": {
+			"text": "UpzHla",
+			"text2": [
+				"Upozorenje",
+				"pri hlađenju"
+			],
+			"desc": "Prikaz temperature trepće prilikom hlađenja dokle god je vrh i dalje vruć."
+		},
+		"TemperatureCalibration": {
+			"text": "KalbrTmp",
+			"text2": [
+				"Kalibracija",
+				"temperature"
+			],
+			"desc": "Kalibrisanje odstupanja temperature vrha u odnosu na dršku."
+		},
+		"SettingsReset": {
+			"text": "FabrPost",
+			"text2": [
+				"Fabričke",
+				"postavke"
+			],
+			"desc": "Vraćanje svih postavki na fabričke vrednosti."
+		},
+		"VoltageCalibration": {
+			"text": "KalbrNap",
+			"text2": [
+				"Kalibracija",
+				"ulaznog napona"
+			],
+			"desc": "Kalibrisanje ulaznog napona. Podešava se na tastere; dugi pritisak za kraj."
+		},
+		"AdvancedSoldering": {
+			"text": "DtlLem",
+			"text2": [
+				"Detalji tokom",
+				"lemljenja"
+			],
+			"desc": "Prikazivanje detaljnih informacija na ekranu tokom lemljenja."
+		},
+		"ScrollingSpeed": {
+			"text": "BrzPor",
+			"text2": [
+				"Brzina",
+				"poruka"
+			],
+			"desc": "Brzina kretanja opisnih poruka poput ove. <S=sporo, B=brzo>"
+		},
+		"TipModel": {
+			"text": "ModelVrh",
+			"text2": [
+				"Model",
+				"vrha"
+			],
+			"desc": "Odabir modela lemnog vrha."
+		},
+		"SimpleCalibrationMode": {
+			"text": "JedKalbr",
+			"text2": [
+				"Jednostavna",
+				"kalibracija"
+			],
+			"desc": "Jednostavna kalibracija kipućom vodom."
+		},
+		"AdvancedCalibrationMode": {
+			"text": "NapKalbr",
+			"text2": [
+				"Napredna",
+				"kalibracija"
+			],
+			"desc": "Napredna kalibracija pomoću termopara."
+		},
+		"PowerInput": {
+			"text": "UlazSnag",
+			"text2": [
+				"Ulazna",
+				"snaga"
+			],
+			"desc": "Snaga napajanja u vatima."
+		}
+	}
+}

Translation Editor/translation_sv.json

@@ -0,0 +1,234 @@
+{
+	"languageCode": "SV",
+	"languageLocalName": "Svenska",
+	"cyrillicGlyphs": false,
+	"messages": {
+		"SettingsCalibrationDone": "Calibration done!",
+		"SettingsCalibrationWarning": "Please ensure the tip is at room temperature before continuing!",
+		"SettingsResetWarning": "Are you sure you want to reset settings to default values?",
+		"UVLOWarningString": "DC LÅG",
+		"UndervoltageString": "Underspänning",
+		"InputVoltageString": "Inspän. V: ",
+		"WarningTipTempString": "Spetstemp: ",
+		"BadTipString": "SPETSFEL",
+		"SleepingSimpleString": "Zzzz",
+		"SleepingAdvancedString": "Viloläge...",
+		"WarningSimpleString": "VARM",
+		"WarningAdvancedString": "!! SPETS VARM !!",
+		"SleepingTipAdvancedString": "Spets:",
+		"IdleTipString": "Spets:",
+		"IdleSetString": " Ange:",
+		"TipDisconnectedString": "SPETS URTAGEN",
+		"SolderingAdvancedPowerPrompt": "Ström: ",
+		"OffString": "Av",
+		"ResetOKMessage":"Reset OK"
+	},
+	"characters": {
+		"SettingRightChar": "H",
+		"SettingLeftChar": "V",
+		"SettingAutoChar": "A",
+		"SettingFastChar": "S",
+		"SettingSlowChar": "L"
+	},
+	"menuDouble": true,
+	"menuGroups": {
+		"SolderingMenu": {
+			"text2": [
+				"Lödnings-",
+				"inställningar"
+			],
+			"desc": "Lödningsinställningar"
+		},
+		"PowerSavingMenu": {
+			"text2": [
+				"Vilo-",
+				"lägen"
+			],
+			"desc": "Viloläges-inställningar"
+		},
+		"UIMenu": {
+			"text2": [
+				"Användar-",
+				"gränssnitt"
+			],
+			"desc": "Användargränssnitts-inställningar"
+		},
+		"AdvancedMenu": {
+			"text2": [
+				"Avancerade",
+				"alternativ"
+			],
+			"desc": "Avancerade alternativ"
+		}
+	},
+	"menuOptions": {
+		"PowerSource": {
+			"text": "",
+			"text2": [
+				"Ström-",
+				"källa"
+			],
+			"desc": "Strömkälla. Anger lägsta spänning. <DC 10V> <S 3.3V per cell>"
+		},
+		"SleepTemperature": {
+			"text": "",
+			"text2": [
+				"Vilo-",
+				"temp"
+			],
+			"desc": "Vilotemperatur <C>"
+		},
+		"SleepTimeout": {
+			"text": "",
+			"text2": [
+				"Vilo-",
+				"timeout"
+			],
+			"desc": "Vilo-timeout <Minuter/Seconder>"
+		},
+		"ShutdownTimeout": {
+			"text": "",
+			"text2": [
+				"Avstängn.",
+				"timeout"
+			],
+			"desc": "Avstängnings-timeout <Minuter>"
+		},
+		"MotionSensitivity": {
+			"text": "",
+			"text2": [
+				"Rörelse-",
+				"känslighet"
+			],
+			"desc": "Rörelsekänslighet <0.Av 1.minst känslig 9.mest känslig>"
+		},
+		"TemperatureUnit": {
+			"text": "",
+			"text2": [
+				"Temperatur-",
+				"enheter"
+			],
+			"desc": "Temperaturenhet <C=Celsius F=Fahrenheit>"
+		},
+		"AdvancedIdle": {
+			"text": "",
+			"text2": [
+				"Detaljerad",
+				"vid inaktiv"
+			],
+			"desc": "Visa detaljerad information i mindre typsnitt när inaktiv."
+		},
+		"DisplayRotation": {
+			"text": "",
+			"text2": [
+				"Visnings",
+				"läge"
+			],
+			"desc": "Visningsläge <A. Automatisk V. Vänsterhänt H. Högerhänt>"
+		},
+		"BoostEnabled": {
+			"text": "",
+			"text2": [
+				"Turboläge",
+				"aktiverat"
+			],
+			"desc": "Aktivera främre knappen för turboläge (temperaturhöjning) vid lödning"
+		},
+		"BoostTemperature": {
+			"text": "",
+			"text2": [
+				"Turbo-",
+				"temp"
+			],
+			"desc": "Temperatur i \"turbo\"-läge"
+		},
+		"AutoStart": {
+			"text": "",
+			"text2": [
+				"Auto",
+				"start"
+			],
+			"desc": "Startar automatiskt lödpennan vid uppstart. T=Lödning, S=Viloläge, F=Av"
+		},
+		"CooldownBlink": {
+			"text": "",
+			"text2": [
+				"Nedkylnings-",
+				"blink"
+			],
+			"desc": "Blinka temperaturen medan spetsen kyls av och fortfarande är varm."
+		},
+		"TemperatureCalibration": {
+			"text": "",
+			"text2": [
+				"Kalibrera",
+				"temperatur?"
+			],
+			"desc": "Kalibrera spets-kompensation."
+		},
+		"SettingsReset": {
+			"text": "",
+			"text2": [
+				"Fabriks-",
+				"inställ?"
+			],
+			"desc": "Återställ alla inställningar"
+		},
+		"VoltageCalibration": {
+			"text": "",
+			"text2": [
+				"Kalibrera",
+				"inspänning?"
+			],
+			"desc": "Inspänningskalibrering. Knapparna justerar, håll inne för avslut"
+		},
+		"AdvancedSoldering": {
+			"text": "",
+			"text2": [
+				"Detaljerad",
+				"lödng.skärm"
+			],
+			"desc": "Visa detaljerad information vid lödning"
+		},
+		"ScrollingSpeed": {
+			"text": "",
+			"text2": [
+				"Beskrivning",
+				"rullhast."
+			],
+			"desc": "Hastighet som den här texten rullar i"
+		},
+		"TipModel": {
+			"text": "TIPMO",
+			"text2": [
+				"Tip",
+				"Model"
+			],
+			"desc": "Tip Model selection"
+		},
+		"SimpleCalibrationMode": {
+			"text": "SMPCAL",
+			"text2": [
+				"Simple",
+				"Calibration"
+			],
+			"desc": "Simple Calibration using Hot water"
+		},
+		"AdvancedCalibrationMode": {
+			"text": "ADVCAL",
+			"text2": [
+				"Advanced",
+				"Calibration"
+			],
+			"desc": "Advanced calibration using thermocouple on the tip"
+		},
+		"PowerInput": {
+			"text": "PWRW",
+			"text2": [
+				"Power",
+				"Wattage"
+			],
+			"desc": "Power Wattage of the power adapter used"
+		}
+	}
+}

Translation Editor/translation_tr.json

@@ -0,0 +1,234 @@
+{
+	"languageCode": "TR",
+	"languageLocalName": "Türk",
+	"cyrillicGlyphs": false,
+	"messages": {
+		"SettingsCalibrationDone": "Calibration done!",
+		"SettingsCalibrationWarning": "Lütfen devam etmeden önce ucun oda sıcaklığında olduğunu garantiye alın!",
+		"SettingsResetWarning": "Are you sure to reset settings to default values?",
+		"UVLOWarningString": "DC LOW",
+		"UndervoltageString": "Undervoltage",
+		"InputVoltageString": "Input V: ",
+		"WarningTipTempString": "Tip Temp: ",
+		"BadTipString": "BAD TIP",
+		"SleepingSimpleString": "Zzzz",
+		"SleepingAdvancedString": "Uyuyor...",
+		"WarningSimpleString": "HOT!",
+		"WarningAdvancedString": "UYARI! UÇ SICAK!",
+		"SleepingTipAdvancedString": "Tip:",
+		"IdleTipString": "Tip:",
+		"IdleSetString": " Set:",
+		"TipDisconnectedString": "TIP DISCONNECTED",
+		"SolderingAdvancedPowerPrompt": "Power: ",
+		"OffString": "Off",
+		"ResetOKMessage":"Reset OK"
+	},
+	"characters": {
+		"SettingRightChar": "R",
+		"SettingLeftChar": "L",
+		"SettingAutoChar": "A",
+		"SettingFastChar": "F",
+		"SettingSlowChar": "S"
+	},
+	"menuDouble": false,
+	"menuGroups": {
+		"SolderingMenu": {
+			"text2": [
+				"Soldering",
+				"Settings"
+			],
+			"desc": "Soldering settings"
+		},
+		"PowerSavingMenu": {
+			"text2": [
+				"Sleep",
+				"Modes"
+			],
+			"desc": "Power Saving Settings"
+		},
+		"UIMenu": {
+			"text2": [
+				"User",
+				"Interface"
+			],
+			"desc": "User Interface settings"
+		},
+		"AdvancedMenu": {
+			"text2": [
+				"Advanced",
+				"Options"
+			],
+			"desc": "Advanced options"
+		}
+	},
+	"menuOptions": {
+		"PowerSource": {
+			"text": "PWRSC",
+			"text2": [
+				"",
+				""
+			],
+			"desc": "Güç Kaynağı. kesim geriliminı ayarlar. <DC 10V> <S 3.3V hücre başına>"
+		},
+		"SleepTemperature": {
+			"text": "STMP",
+			"text2": [
+				"",
+				""
+			],
+			"desc": "Uyku Sıcaklığı <C>"
+		},
+		"SleepTimeout": {
+			"text": "STME",
+			"text2": [
+				"",
+				""
+			],
+			"desc": "Uyku Zaman Aşımı <Dakika/Saniye>"
+		},
+		"ShutdownTimeout": {
+			"text": "SHTME",
+			"text2": [
+				"",
+				""
+			],
+			"desc": "Kapatma Zaman Aşımı <Dakika>"
+		},
+		"MotionSensitivity": {
+			"text": "MSENSE",
+			"text2": [
+				"",
+				""
+			],
+			"desc": "Hareket Hassasiyeti <0.Kapalı 1.En az duyarlı 9.En duyarlı>"
+		},
+		"TemperatureUnit": {
+			"text": "TMPUNT",
+			"text2": [
+				"",
+				""
+			],
+			"desc": "Sıcaklık Ünitesi <C=Celsius F=Fahrenheit>"
+		},
+		"AdvancedIdle": {
+			"text": "ADVIDL",
+			"text2": [
+				"",
+				""
+			],
+			"desc": "Boş ekranda ayrıntılı bilgileri daha küçük bir yazı tipi ile göster."
+		},
+		"DisplayRotation": {
+			"text": "DSPROT",
+			"text2": [
+				"",
+				""
+			],
+			"desc": "Görüntü Yönlendirme <A. Otomatik L. Solak R. Sağlak>"
+		},
+		"BoostEnabled": {
+			"text": "BOOST",
+			"text2": [
+				"",
+				""
+			],
+			"desc": "Lehimleme yaparken ön tuşa basmak Boost moduna sokar(450C)"
+		},
+		"BoostTemperature": {
+			"text": "BTMP",
+			"text2": [
+				"",
+				""
+			],
+			"desc": "\"boost\" Modu Derecesi"
+		},
+		"AutoStart": {
+			"text": "ASTART",
+			"text2": [
+				"",
+				""
+			],
+			"desc": "Güç verildiğinde otomatik olarak lehimleme modunda başlat. T=Lehimleme Modu, S= Uyku Modu,F=Kapalı"
+		},
+		"CooldownBlink": {
+			"text": "CLBLNK",
+			"text2": [
+				"",
+				""
+			],
+			"desc": "Soğutma ekranında uç hala sıcakken derece yanıp sönsün."
+		},
+		"TemperatureCalibration": {
+			"text": "TMP CAL?",
+			"text2": [
+				"",
+				""
+			],
+			"desc": "Ucu kalibre et."
+		},
+		"SettingsReset": {
+			"text": "RESET?",
+			"text2": [
+				"",
+				""
+			],
+			"desc": "Bütün ayarları sıfırla"
+		},
+		"VoltageCalibration": {
+			"text": "CAL VIN?",
+			"text2": [
+				"",
+				""
+			],
+			"desc": "VIN Kalibrasyonu. Düğmeler ayarlar, çıkmak için uzun bas."
+		},
+		"AdvancedSoldering": {
+			"text": "ADVSLD",
+			"text2": [
+				"",
+				""
+			],
+			"desc": "Lehimleme yaparken detaylı bilgi göster"
+		},
+		"ScrollingSpeed": {
+			"text": "DESCSP",
+			"text2": [
+				"",
+				""
+			],
+			"desc": "Speed this text scrolls past at"
+		},
+		"TipModel": {
+			"text": "TIPMO",
+			"text2": [
+				"Tip",
+				"Model"
+			],
+			"desc": "Tip Model selection"
+		},
+		"SimpleCalibrationMode": {
+			"text": "SMPCAL",
+			"text2": [
+				"Simple",
+				"Calibration"
+			],
+			"desc": "Simple Calibration using Hot water"
+		},
+		"AdvancedCalibrationMode": {
+			"text": "ADVCAL",
+			"text2": [
+				"Advanced",
+				"Calibration"
+			],
+			"desc": "Advanced calibration using thermocouple on the tip"
+		},
+		"PowerInput": {
+			"text": "PWRW",
+			"text2": [
+				"Power",
+				"Wattage"
+			],
+			"desc": "Power Wattage of the power adapter used"
+		}
+	}
+}

Translation Editor/translation_uk.json

@@ -0,0 +1,234 @@
+{
+	"languageCode": "UK",
+	"languageLocalName": "Українська",
+	"cyrillicGlyphs": true,
+	"messages": {
+		"SettingsCalibrationDone": "Calibration done!",
+		"SettingsCalibrationWarning": "Переконайтеся, що жало охололо до кімнатної температури, перш ніж продовжувати!",
+		"SettingsResetWarning": "Ви дійсно хочете скинути налаштування до значень за замовчуванням?",
+		"UVLOWarningString": "АККУМ--",
+		"UndervoltageString": "Під живленням",
+		"InputVoltageString": "Жив.(B): ",
+		"WarningTipTempString": "Жало t°: ",
+		"BadTipString": "Жало--",
+		"SleepingSimpleString": "Сон ",
+		"SleepingAdvancedString": "Очікування...",
+		"WarningSimpleString": "АЙ!",
+		"WarningAdvancedString": "УВАГА ГАРЯЧЕ!",
+		"SleepingTipAdvancedString": "Жало:",
+		"IdleTipString": "Жало:",
+		"IdleSetString": " ->",
+		"TipDisconnectedString": "Жало вимкнено!",
+		"SolderingAdvancedPowerPrompt": "Живлення: ",
+		"OffString": "Вим",
+		"ResetOKMessage":"Reset OK"
+	},
+	"characters": {
+		"SettingRightChar": "R",
+		"SettingLeftChar": "L",
+		"SettingAutoChar": "A",
+		"SettingFastChar": "+",
+		"SettingSlowChar": "-"
+	},
+	"menuDouble": true,
+	"menuGroups": {
+		"SolderingMenu": {
+			"text2": [
+				"Пайка",
+				""
+			],
+			"desc": "Налаштування для режиму пайки. Діють при включеному жалі."
+		},
+		"PowerSavingMenu": {
+			"text2": [
+				"Сон",
+				""
+			],
+			"desc": "Налаштування при бездіяльності. Корисно що б не обпектися і з часом не спалити житло."
+		},
+		"UIMenu": {
+			"text2": [
+				"Інтерфейс",
+				""
+			],
+			"desc": "Користувальницький інтерфейс."
+		},
+		"AdvancedMenu": {
+			"text2": [
+				"Інші",
+				""
+			],
+			"desc": "Розширені налаштування. Додаткові зручності."
+		}
+	},
+	"menuOptions": {
+		"PowerSource": {
+			"text": "",
+			"text2": [
+				"Джерело",
+				"живлення"
+			],
+			"desc": "Установка напруги відключення. <DC - 10V, 3S - 9.9V, 4S - 13.2V, 5S - 16.5V, 6S - 19.8V>"
+		},
+		"SleepTemperature": {
+			"text": "",
+			"text2": [
+				"Темпер.",
+				"сну"
+			],
+			"desc": "Температура режиму очікування <C°/F°>"
+		},
+		"SleepTimeout": {
+			"text": "",
+			"text2": [
+				"Таймаут",
+				"сну"
+			],
+			"desc": "Час до переходу в режим очікування <Доступно отключение>"
+		},
+		"ShutdownTimeout": {
+			"text": "",
+			"text2": [
+				"Часу до",
+				"вимкнення"
+			],
+			"desc": "Час до відключення <Доступно відключення>"
+		},
+		"MotionSensitivity": {
+			"text": "",
+			"text2": [
+				"Чутл. сенсо-",
+				"ру руху"
+			],
+			"desc": "Акселерометр <0 - Викл. 1 хв. чутливості 9 - макс. чутливості>"
+		},
+		"TemperatureUnit": {
+			"text": "",
+			"text2": [
+				"Формат темпе-",
+				"ратури(C°/F°)"
+			],
+			"desc": "Одиниця виміру температури <C - Цельсій, F - Фаренгейт>"
+		},
+		"AdvancedIdle": {
+			"text": "",
+			"text2": [
+				"Детальний ре-",
+				"жим очікуван."
+			],
+			"desc": "Показувати детальну в режимі налаштувань <Замість картинки>"
+		},
+		"DisplayRotation": {
+			"text": "",
+			"text2": [
+				"Автоповорот",
+				"екрану"
+			],
+			"desc": "Орієнтація дисплея <A - Автоповорот, L - Лівша, R - Правша>"
+		},
+		"BoostEnabled": {
+			"text": "",
+			"text2": [
+				"Режим",
+				"Турбо"
+			],
+			"desc": "Турбо-режим при утриманні кнопки А при пайці"
+		},
+		"BoostTemperature": {
+			"text": "",
+			"text2": [
+				"Темпер.",
+				"Турбо"
+			],
+			"desc": "Температура в Турбо-режимі"
+		},
+		"AutoStart": {
+			"text": "",
+			"text2": [
+				"Гарячий",
+				"старт"
+			],
+			"desc": "Автоматичний перехід в режим пайки при включенні живлення."
+		},
+		"CooldownBlink": {
+			"text": "",
+			"text2": [
+				"Показ t° при",
+				"охолодж."
+			],
+			"desc": "Показувати температуру на екрані охолодження, поки жало залишається гарячим, при цьому екран моргає"
+		},
+		"TemperatureCalibration": {
+			"text": "",
+			"text2": [
+				"Калібровка",
+				"температури"
+			],
+			"desc": "Калібрування температурного датчика."
+		},
+		"SettingsReset": {
+			"text": "",
+			"text2": [
+				"Скинути всі",
+				"налаштування?"
+			],
+			"desc": "Скидання всіх параметрів до вихідних значень."
+		},
+		"VoltageCalibration": {
+			"text": "",
+			"text2": [
+				"Калібровка",
+				"напруга"
+			],
+			"desc": "Калібрування напруги входу. Налаштувати кнопками, натиснути і утримати щоб завершити."
+		},
+		"AdvancedSoldering": {
+			"text": "",
+			"text2": [
+				"Детальний ре-",
+				"жим пайки"
+			],
+			"desc": "Показувати детальну інформацію при пайці."
+		},
+		"ScrollingSpeed": {
+			"text": "",
+			"text2": [
+				"Швидкість",
+				"тексту"
+			],
+			"desc": "Швидкість прокрутки тексту"
+		},
+		"TipModel": {
+			"text": "TIPMO",
+			"text2": [
+				"Tip",
+				"Model"
+			],
+			"desc": "Tip Model selection"
+		},
+		"SimpleCalibrationMode": {
+			"text": "SMPCAL",
+			"text2": [
+				"Simple",
+				"Calibration"
+			],
+			"desc": "Simple Calibration using Hot water"
+		},
+		"AdvancedCalibrationMode": {
+			"text": "ADVCAL",
+			"text2": [
+				"Advanced",
+				"Calibration"
+			],
+			"desc": "Advanced calibration using thermocouple on the tip"
+		},
+		"PowerInput": {
+			"text": "PWRW",
+			"text2": [
+				"Power",
+				"Wattage"
+			],
+			"desc": "Power Wattage of the power adapter used"
+		}
+	}
+}

Translation Editor/translations.css

@@ -0,0 +1,110 @@
+* {
+	font-family: sans-serif;
+}
+
+h1 {
+	color: #66A;
+}
+
+h1 span {
+	color: #000;
+}
+
+table.data, div.data {
+	border: 1px solid #888;
+	width: 100%;
+}
+
+div.value {
+	margin: 2px;
+}
+
+.header input {
+	width: 50% !important;
+}
+
+input.short {
+	width: 150px  !important;
+	font-family: monospace;
+}
+
+.header .selected {
+	display: block;
+	font-family: monospace;
+}
+
+.stringId {
+	font-family: monospace;
+	font-weight: bold;
+}
+
+.label {
+	background-color: #ddf;
+	padding: 0.5em;
+	width: 20%;
+	color: #66A;
+}
+
+.value {
+	background-color: #eef;
+}
+
+.value .label {
+	width: 99%;
+	font-weight: bold;
+}
+
+td input {
+	width: 99%;
+}
+
+input.unchanged, input.empty, .unchanged input, .empty input {
+	background-color: #ffc;
+}
+
+input.invalid, .invalid input {
+	background-color: #f99;
+}
+
+.ref, .tran input {
+	font-family: monospace;
+}
+
+.ref::before, .ref::after {
+	color: #99F;
+	font-family: sans-serif;
+	content: "\"";
+}
+
+.note {
+	color : #66A;
+	font-style: italic;
+}
+
+div.constraint {
+	float: right;
+	display: inline-block;
+	font-family: monospace;
+	color: #66A;
+}
+
+.invalid .constraint {
+	color: #f00;
+}
+
+.value {
+	font-size: smaller;
+}
+
+.hidden {
+	display: none;
+}
+
+.footer {
+	margin-top: 0.5em;
+	margin-bottom: 0.5em;
+}
+
+.saved {
+	background-color: #ddd;
+}

Translation Editor/translations_commons.js

@@ -0,0 +1,68 @@
+function saveToFile(txt, filename){
+	var a = document.createElement('a');
+	a.setAttribute("style", "display: none");
+	document.body.appendChild(a);
+	a.setAttribute('href', 'data:application/json;charset=utf-8,'+encodeURIComponent(txt));
+	a.setAttribute('download', filename);
+	a.click();
+	document.body.removeChild(a);
+}
+
+function saveJSON(obj, filename){
+	var txt = JSON.stringify(obj,"", "\t");
+	saveToFile(txt, filename);
+}
+
+function showJSON(obj, filename) {
+	var txt = JSON.stringify(obj,"", "\t");
+	var a = window.open("", "_blank").document;
+	a.write("<PLAINTEXT>");
+	a.write(txt);
+	a.title = filename;
+}
+
+function startsWith(str, prefix) {
+	return str.substring(0, prefix.length) == prefix;
+}
+
+function endsWith(str, suffix) {
+	return str.substring(str.length-suffix.length) == suffix;
+}
+
+function isDefined(obj) {
+	return typeof obj !== 'undefined';
+}
+
+function isNumber(obj) {
+	return isDefined(obj) && obj != null;
+}
+
+function isDefinedNN(obj) {
+	return isDefined(obj) && obj != null;
+}
+
+function padLeft(str, chr, maxLen) {
+	str = str.toString();
+	return str.length < maxLen ? padLeft(chr + str, chr, maxLen) : str;
+}
+
+// sourceArray contains a list of objects that have a property "id". This methods makes a map using the "id" as a key, and the owning object as a value.
+function copyArrayToMap(sourceArray, map) {
+	if (!isDefined(map)) {
+		map = {};
+	}
+	var len = sourceArray.length;
+	for (var i = 0; i<len; i++) {
+		var v = sourceArray[i];
+		map[v.id] = v;
+	}
+	return map;
+}
+
+function checkTranslationFile(fileName) {
+	return startsWith(fileName, "translation_") && endsWith(fileName, ".json") || confirm("Are you sure that you want to use "+fileName+" instead of a translation_*.json file?");
+}
+
+function xunescape(str) {
+	return str.replace(/\\/g, "");
+}

Translation Editor/translations_def.js

@@ -0,0 +1,241 @@
+var def =
+{
+	"messages": [
+		{
+			"id": "SettingsCalibrationDone"
+		},
+		{
+			"id": "SettingsCalibrationWarning"
+		},
+		{
+			"id": "SettingsResetWarning"
+		},
+		{
+			"id": "UVLOWarningString",
+			"maxLen": 8
+		},
+		{
+			"id": "UndervoltageString",
+			"maxLen": 16
+		},
+		{
+			"id": "InputVoltageString",
+			"maxLen": 11,
+			"note": "Preferably end with a space"
+		},
+		{
+			"id": "WarningTipTempString",
+			"maxLen": 12,
+			"note": "Preferably end with a space"
+		},
+		{
+			"id": "BadTipString",
+			"maxLen": 8
+		},
+		{
+			"id": "SleepingSimpleString",
+			"maxLen": 4
+		},
+		{
+			"id": "SleepingAdvancedString",
+			"maxLen": 16
+		},
+		{
+			"id": "WarningSimpleString",
+			"maxLen": 4
+		},
+		{
+			"id": "WarningAdvancedString",
+			"maxLen": 16
+		},
+		{
+			"id": "SleepingTipAdvancedString",
+			"maxLen": 6
+		},
+		{
+			"id": "IdleTipString",
+			"lenSum":
+			{
+				"fields": ["IdleTipString", "IdleSetString"],
+				"maxLen": 10
+			}
+		},
+		{
+			"id": "IdleSetString",
+			"lenSum":
+			{
+				"fields": ["IdleTipString", "IdleSetString"],
+				"maxLen": 10
+			},
+			"note": "Preferably start with a space"
+		},
+		{
+			"id": "TipDisconnectedString",
+			"maxLen": 16
+		},
+		{
+			"id": "SolderingAdvancedPowerPrompt",
+			"maxLen": null
+		},
+		{
+			"id": "OffString",
+			"maxLen": 3
+		},
+		{
+			"id": "ResetOKMessage",
+			"maxLen": 8
+		}, 
+		{
+			"id": "YourGainMessage",
+			"maxLen": 8,
+			"default":"Your Gain"
+		}
+	],
+	"characters": [
+		{
+			"id": "SettingRightChar",
+			"len": 1
+		},
+		{
+			"id": "SettingLeftChar",
+			"len": 1
+		},
+		{
+			"id": "SettingAutoChar",
+			"len": 1
+		},
+		{
+			"id": "SettingFastChar",
+			"len": 1
+		},
+		{
+			"id": "SettingSlowChar",
+			"len": 1
+		}
+	],
+	"menuGroups": [
+		{
+			"id": "SolderingMenu",
+			"maxLen": 11
+		},
+		{
+			"id": "PowerSavingMenu",
+			"maxLen": 11
+		},
+		{
+			"id": "UIMenu",
+			"maxLen": 11
+		},
+		{
+			"id": "AdvancedMenu",
+			"maxLen": 11
+		}
+	],
+	"menuOptions": [
+		{
+			"id": "PowerSource",
+			"maxLen": 5,
+			"maxLen2": 11
+		},
+		{
+			"id": "SleepTemperature",
+			"maxLen": 4,
+			"maxLen2": 9
+		},
+		{
+			"id": "SleepTimeout",
+			"maxLen": 4,
+			"maxLen2": 9
+		},
+		{
+			"id": "ShutdownTimeout",
+			"maxLen": 5,
+			"maxLen2": 11
+		},
+		{
+			"id": "MotionSensitivity",
+			"maxLen": 6,
+			"maxLen2": 13
+		},
+		{
+			"id": "TemperatureUnit",
+			"maxLen": 6,
+			"maxLen2": 13
+		},
+		{
+			"id": "AdvancedIdle",
+			"maxLen": 6,
+			"maxLen2": 13
+		},
+		{
+			"id": "DisplayRotation",
+			"maxLen": 6,
+			"maxLen2": 13
+		},
+		{
+			"id": "BoostEnabled",
+			"maxLen": 6,
+			"maxLen2": 13
+		},
+		{
+			"id": "BoostTemperature",
+			"maxLen": 4,
+			"maxLen2": 9
+		},
+		{
+			"id": "AutoStart",
+			"maxLen": 6,
+			"maxLen2": 13
+		},
+		{
+			"id": "CooldownBlink",
+			"maxLen": 6,
+			"maxLen2": 13
+		},
+		{
+			"id": "TemperatureCalibration",
+			"maxLen": 8,
+			"maxLen2": 16
+		},
+		{
+			"id": "SettingsReset",
+			"maxLen": 8,
+			"maxLen2": 16
+		},
+		{
+			"id": "VoltageCalibration",
+			"maxLen": 8,
+			"maxLen2": 16
+		},
+		{
+			"id": "AdvancedSoldering",
+			"maxLen": 6,
+			"maxLen2": 13
+		},
+		{
+			"id": "ScrollingSpeed",
+			"maxLen": 6,
+			"maxLen2": 11
+		},
+		{
+			"id": "TipModel",
+			"maxLen": 8,
+			"maxLen2": 16
+		},
+		{
+			"id": "SimpleCalibrationMode",
+			"maxLen": 8,
+			"maxLen2": 16
+		},
+		{
+			"id": "AdvancedCalibrationMode",
+			"maxLen": 8,
+			"maxLen2": 16
+		},
+		{
+			"id": "PowerInput",
+			"maxLen": 8,
+			"maxLen2": 16
+		}
+	]
+}

Translation.md

@@ -1,5 +1,6 @@
 # Translation
-If you would like to contribute a translation, look at the file `translation.c` in the source code.
-Currently translations are compiled in at compile time with #defines (nothing complex).
-So all you need to do is add another section formatted like the english one that is there and either create a pull request or a github issue for inclusion.
-If the glyphs required already exist in the fonts then support should be quick. Otherwise it may take longer for the fonts to be created.
+If you would like to contribute a translation, use the [Translation Editor](http://htmlpreview.github.io/?https://github.com/Ralim/ts100/blob/master/Translation%20Editor/TranslationEditor.html).
+
+[Open a reference language file and optionally a target language file](https://github.com/Ralim/ts100/tree/master/Translation%20Editor).
+
+You can create an issue with your updated json translation, or make your own pull request. If you make a pull request, also run `python3 make_translation.py` to regenerate the source file.

menu.md

@@ -0,0 +1,77 @@
+# Menu System
+
+
+## Soldering mode
+
+In this mode the iron works as you would expect, pressing either button will take you to a temperature change screen.
+Use each button to go up and down in temperature. Pressing both buttons will exit you from the temperature menu (or wait 3 seconds and it will time out).
+Pressing both buttons or holding the button near the USB will exit the soldering mode.
+Holding the button at the front of the iron will enter boost mode (if enabled).
+
+## Settings Menu
+
+This menu allows you to cycle through all the options and set their values.
+The button near the USB cycles through the options, and the one near the tip changes the selected option.
+Note that settings are not saved until you exit the menu.
+If you leave the unit alone (ie don't press any buttons) on a setting, after 3 seconds the screen will scroll a rough description of the setting.
+
+The menu is arranged so that the most often used settings are first.
+With submenu's being selected to enter using the front button (as if you were going to change the setting).
+Scrolling through the submenu will return you back to its entry location after you scroll through all of the options.
+
+### Calibrating input voltage
+
+Due to the tolerance on the resistors used for the input voltage divider, some irons can be up to 0.6V out on the voltage measurement.
+Please calibrate your iron if you have any issues with the cutoff voltage.
+Note that cutoff messages can also be triggered by using a power supply that is too weak and fails under the load of the iron.
+This is more critical than before with the new cell count based cutout voltage.
+
+To calibrate your Iron:
+
+1. Measure the input voltage with a multimeter and note it down.
+2. Connect the input to your iron.
+3. Enter the settings menu
+4. Under the advanced submenu
+5. Select the calibrate voltage option
+6. Use the front and back buttons to adjust the displayed voltage to minimize the error to your original measurement
+7. Hold both buttons to save and exit to the menu
+
+### Tip Model Selection
+
+The menu now lets you select which tip you are using with your iron. This lets the unit know which gain value to use for your tip, this varies slightly between models and can help with temperature accuracy.
+There is also an option for a *custom* tip. This basically means that you will tune the tip parameters yourself.
+
+### Calibrating tip offset (Set tip model)
+
+Some tips will have an offset on their readings, to calibrate this out perform the following steps:
+
+1. Connect power to your iron
+2. Make sure the tip is at room temperature (ie. wait for a fair while after using the iron before calibration)
+3. Enter the settings menu
+4. Scroll down to the advanced menu, and then the temperature calibration
+5. Press the button to change the option (tip button)
+6. The display will start to scroll a warning message to check that the tip is at ambient temperature!
+7. Press the button near the tip of the iron to confirm.
+8. The display will go to "...." for a short period of time as the unit measures the tip temperature and the handle temperature and compares them
+9. The display will then go back to *TMP CAL*
+10. Calibration is done, just exit the settings menu as normal
+11. You're done. Enjoy your iron.
+
+### Calibration of custom tip
+
+There are two methods to calibrate the tip, the simple mode which requires boiling water, and an advanced mode that requires a method of measuring the actual tip of the tip.
+
+Advanced mode is preffered.
+
+In simple mode you first need to have the tip at room temperature to start, and then when promped place the tip into a cup of boiling water, wait a few seconds and then press a button to confirm.
+
+In advanced mode, follow instructions on the screen, you will need to adjust the ranges to find two calibration points by measuing the tip temperature directly. This tends to be significantly more accurate.
+
+If you do calibrate your own values for a tip because its missing from the menu or because you think the one in the menu is really wrong, raise an issue on github and I'm happy to look at adding it or revising the existing settings.
+
+
+### Boost mode
+
+This allows you to change the front key (one near the tip) to become a boost button when you hold it for > 2 seconds. This allows you to set this button to change the soldering temperature for short periods. For example when soldering a big joint and you want to boost the temperature a bit.
+
+The boost temperature is set in the settings menu.

workspace/TS100/.cproject

@@ -36,6 +36,7 @@
 								</option>
 								<option id="gnu.c.compiler.option.preprocessor.def.symbols.2127531885" name="Defined symbols (-D)" superClass="gnu.c.compiler.option.preprocessor.def.symbols" useByScannerDiscovery="false" valueType="definedSymbols">
 									<listOptionValue builtIn="false" value="STM32F103T8Ux"/>
+									<listOptionValue builtIn="false" value="MODEL_TS100"/>
 									<listOptionValue builtIn="false" value="STM32F1"/>
 									<listOptionValue builtIn="false" value="STM32"/>
 									<listOptionValue builtIn="false" value="DEBUG"/>
@@ -44,7 +45,7 @@
 									<listOptionValue builtIn="false" value="USE_RTOS_SYSTICK"/>
 								</option>
 								<option id="gnu.c.compiler.option.dialect.std.565083189" name="Language standard" superClass="gnu.c.compiler.option.dialect.std" useByScannerDiscovery="true" value="gnu.c.compiler.dialect.default" valueType="enumerated"/>
-								<option id="fr.ac6.managedbuild.tool.gnu.cross.c.compiler.fdata.338139343" superClass="fr.ac6.managedbuild.tool.gnu.cross.c.compiler.fdata" useByScannerDiscovery="false" value="true" valueType="boolean"/>
+								<option id="fr.ac6.managedbuild.tool.gnu.cross.c.compiler.fdata.338139343" name="Place the data in their own section (-fdata-sections)" superClass="fr.ac6.managedbuild.tool.gnu.cross.c.compiler.fdata" useByScannerDiscovery="false" value="true" valueType="boolean"/>
 								<inputType id="fr.ac6.managedbuild.tool.gnu.cross.c.compiler.input.c.176392389" superClass="fr.ac6.managedbuild.tool.gnu.cross.c.compiler.input.c"/>
 								<inputType id="fr.ac6.managedbuild.tool.gnu.cross.c.compiler.input.s.893418158" superClass="fr.ac6.managedbuild.tool.gnu.cross.c.compiler.input.s"/>
 							</tool>
@@ -63,6 +64,7 @@
 								</option>
 								<option id="gnu.cpp.compiler.option.preprocessor.def.766879664" name="Defined symbols (-D)" superClass="gnu.cpp.compiler.option.preprocessor.def" useByScannerDiscovery="false" valueType="definedSymbols">
 									<listOptionValue builtIn="false" value="STM32F103T8Ux"/>
+									<listOptionValue builtIn="false" value="MODEL_TS100"/>
 									<listOptionValue builtIn="false" value="STM32F1"/>
 									<listOptionValue builtIn="false" value="STM32"/>
 									<listOptionValue builtIn="false" value="DEBUG"/>
@@ -71,7 +73,7 @@
 									<listOptionValue builtIn="false" value="USE_RTOS_SYSTICK"/>
 								</option>
 								<option id="gnu.cpp.compiler.option.dialect.std.1681974405" name="Language standard" superClass="gnu.cpp.compiler.option.dialect.std" useByScannerDiscovery="true" value="gnu.cpp.compiler.dialect.default" valueType="enumerated"/>
-								<option id="fr.ac6.managedbuild.tool.gnu.cross.cpp.compiler.fdata.1463726438" superClass="fr.ac6.managedbuild.tool.gnu.cross.cpp.compiler.fdata" useByScannerDiscovery="false" value="true" valueType="boolean"/>
+								<option id="fr.ac6.managedbuild.tool.gnu.cross.cpp.compiler.fdata.1463726438" name="Place the data in their own section (-fdata-sections)" superClass="fr.ac6.managedbuild.tool.gnu.cross.cpp.compiler.fdata" useByScannerDiscovery="false" value="true" valueType="boolean"/>
 								<inputType id="fr.ac6.managedbuild.tool.gnu.cross.cpp.compiler.input.cpp.149685854" superClass="fr.ac6.managedbuild.tool.gnu.cross.cpp.compiler.input.cpp"/>
 								<inputType id="fr.ac6.managedbuild.tool.gnu.cross.cpp.compiler.input.s.1092052043" superClass="fr.ac6.managedbuild.tool.gnu.cross.cpp.compiler.input.s"/>
 							</tool>
@@ -99,6 +101,7 @@
 							</tool>
 						</toolChain>
 					</folderInfo>
+					<fileInfo id="fr.ac6.managedbuild.config.gnu.cross.exe.debug.1352500998.1352310611" name="LIS2DH12.hpp" rcbsApplicability="disable" resourcePath="inc/LIS2DH12.hpp" toolsToInvoke=""/>
 					<sourceEntries>
 						<entry excluding="Src/stm32f1xx_hal_timebase_tim_template.c|Src/stm32f1xx_hal_timebase_rtc_wakeup_template.c|Src/stm32f1xx_hal_timebase_rtc_alarm_template.c" flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="sourcePath" name="HAL_Driver"/>
 						<entry excluding="Third_Party/FreeRTOS/Source/portable/MemMang/heap_1.c|Third_Party/FreeRTOS/Source/portable/MemMang/heap_2.c|Third_Party/FreeRTOS/Source/portable/MemMang/heap_3.c|Third_Party/FreeRTOS/Source/portable/MemMang/heap_5.c" flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="sourcePath" name="Middlewares"/>

workspace/TS100/HAL_Driver/Inc/stm32_assert_template.h

@@ -2,8 +2,6 @@
   ******************************************************************************
   * @file    stm32_assert.h
   * @author  MCD Application Team
-  * @version V1.1.1
-  * @date    12-May-2017
   * @brief   STM32 assert template file.
   *          This file should be copied to the application folder and renamed
   *          to stm32_assert.h.
@@ -42,7 +40,7 @@
 #define __STM32_ASSERT_H
 
 #ifdef __cplusplus
- extern "C" {
+extern "C" {
 #endif
 
 /* Exported types ------------------------------------------------------------*/
@@ -58,11 +56,11 @@
   *         If expr is true, it returns no value.
   * @retval None
   */
-  #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
+#define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
 /* Exported functions ------------------------------------------------------- */
-  void assert_failed(uint8_t* file, uint32_t line);
+void assert_failed(uint8_t *file, uint32_t line);
 #else
-  #define assert_param(expr) ((void)0U)
+#define assert_param(expr) ((void)0U)
 #endif /* USE_FULL_ASSERT */
 
 #ifdef __cplusplus

workspace/TS100/HAL_Driver/Inc/stm32f1xx_hal.h

@@ -2,9 +2,7 @@
   ******************************************************************************
   * @file    stm32f1xx_hal.h
   * @author  MCD Application Team
-  * @version V1.1.1
-  * @date    12-May-2017
-  * @brief   This file contains all the functions prototypes for the HAL 
+  * @brief   This file contains all the functions prototypes for the HAL
   *          module driver.
   ******************************************************************************
   * @attention
@@ -34,14 +32,14 @@
   * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
   *
   ******************************************************************************
-  */ 
+  */
 
 /* Define to prevent recursive inclusion -------------------------------------*/
 #ifndef __STM32F1xx_HAL_H
 #define __STM32F1xx_HAL_H
 
 #ifdef __cplusplus
- extern "C" {
+extern "C" {
 #endif
 
 /* Includes ------------------------------------------------------------------*/
@@ -53,44 +51,67 @@
 
 /** @addtogroup HAL
   * @{
-  */ 
+  */
 
-/* Exported types ------------------------------------------------------------*/
 /* Exported constants --------------------------------------------------------*/
 
+/** @defgroup HAL_Exported_Constants HAL Exported Constants
+  * @{
+  */
+
+/** @defgroup HAL_TICK_FREQ Tick Frequency
+  * @{
+  */
+typedef enum
+{
+  HAL_TICK_FREQ_10HZ         = 100U,
+  HAL_TICK_FREQ_100HZ        = 10U,
+  HAL_TICK_FREQ_1KHZ         = 1U,
+  HAL_TICK_FREQ_DEFAULT      = HAL_TICK_FREQ_1KHZ
+} HAL_TickFreqTypeDef;
+/**
+  * @}
+  */
+/* Exported types ------------------------------------------------------------*/
+extern uint32_t uwTickPrio;
+extern HAL_TickFreqTypeDef uwTickFreq;
+
+/**
+  * @}
+  */
 /* Exported macro ------------------------------------------------------------*/
 /** @defgroup HAL_Exported_Macros HAL Exported Macros
   * @{
   */
 
 /** @defgroup DBGMCU_Freeze_Unfreeze Freeze Unfreeze Peripherals in Debug mode
-  * @brief   Freeze/Unfreeze Peripherals in Debug mode 
+  * @brief   Freeze/Unfreeze Peripherals in Debug mode
   * Note: On devices STM32F10xx8 and STM32F10xxB,
   *                  STM32F101xC/D/E and STM32F103xC/D/E,
   *                  STM32F101xF/G and STM32F103xF/G
   *                  STM32F10xx4 and STM32F10xx6
-  *       Debug registers DBGMCU_IDCODE and DBGMCU_CR are accessible only in 
+  *       Debug registers DBGMCU_IDCODE and DBGMCU_CR are accessible only in
   *       debug mode (not accessible by the user software in normal mode).
   *       Refer to errata sheet of these devices for more details.
   * @{
   */
-   
+
 /* Peripherals on APB1 */
 /**
-  * @brief  TIM2 Peripherals Debug mode 
+  * @brief  TIM2 Peripherals Debug mode
   */
 #define __HAL_DBGMCU_FREEZE_TIM2()            SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM2_STOP)
 #define __HAL_DBGMCU_UNFREEZE_TIM2()          CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM2_STOP)
 
 /**
-  * @brief  TIM3 Peripherals Debug mode 
+  * @brief  TIM3 Peripherals Debug mode
   */
 #define __HAL_DBGMCU_FREEZE_TIM3()            SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM3_STOP)
 #define __HAL_DBGMCU_UNFREEZE_TIM3()          CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM3_STOP)
 
 #if defined (DBGMCU_CR_DBG_TIM4_STOP)
 /**
-  * @brief  TIM4 Peripherals Debug mode 
+  * @brief  TIM4 Peripherals Debug mode
   */
 #define __HAL_DBGMCU_FREEZE_TIM4()            SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM4_STOP)
 #define __HAL_DBGMCU_UNFREEZE_TIM4()          CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM4_STOP)
@@ -98,7 +119,7 @@
 
 #if defined (DBGMCU_CR_DBG_TIM5_STOP)
 /**
-  * @brief  TIM5 Peripherals Debug mode 
+  * @brief  TIM5 Peripherals Debug mode
   */
 #define __HAL_DBGMCU_FREEZE_TIM5()            SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM5_STOP)
 #define __HAL_DBGMCU_UNFREEZE_TIM5()          CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM5_STOP)
@@ -106,7 +127,7 @@
 
 #if defined (DBGMCU_CR_DBG_TIM6_STOP)
 /**
-  * @brief  TIM6 Peripherals Debug mode 
+  * @brief  TIM6 Peripherals Debug mode
   */
 #define __HAL_DBGMCU_FREEZE_TIM6()            SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM6_STOP)
 #define __HAL_DBGMCU_UNFREEZE_TIM6()          CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM6_STOP)
@@ -114,7 +135,7 @@
 
 #if defined (DBGMCU_CR_DBG_TIM7_STOP)
 /**
-  * @brief  TIM7 Peripherals Debug mode 
+  * @brief  TIM7 Peripherals Debug mode
   */
 #define __HAL_DBGMCU_FREEZE_TIM7()            SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM7_STOP)
 #define __HAL_DBGMCU_UNFREEZE_TIM7()          CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM7_STOP)
@@ -122,7 +143,7 @@
 
 #if defined (DBGMCU_CR_DBG_TIM12_STOP)
 /**
-  * @brief  TIM12 Peripherals Debug mode 
+  * @brief  TIM12 Peripherals Debug mode
   */
 #define __HAL_DBGMCU_FREEZE_TIM12()            SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM12_STOP)
 #define __HAL_DBGMCU_UNFREEZE_TIM12()          CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM12_STOP)
@@ -130,7 +151,7 @@
 
 #if defined (DBGMCU_CR_DBG_TIM13_STOP)
 /**
-  * @brief  TIM13 Peripherals Debug mode 
+  * @brief  TIM13 Peripherals Debug mode
   */
 #define __HAL_DBGMCU_FREEZE_TIM13()            SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM13_STOP)
 #define __HAL_DBGMCU_UNFREEZE_TIM13()          CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM13_STOP)
@@ -138,33 +159,33 @@
 
 #if defined (DBGMCU_CR_DBG_TIM14_STOP)
 /**
-  * @brief  TIM14 Peripherals Debug mode 
+  * @brief  TIM14 Peripherals Debug mode
   */
 #define __HAL_DBGMCU_FREEZE_TIM14()            SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM14_STOP)
 #define __HAL_DBGMCU_UNFREEZE_TIM14()          CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM14_STOP)
 #endif
 
 /**
-  * @brief  WWDG Peripherals Debug mode 
+  * @brief  WWDG Peripherals Debug mode
   */
 #define __HAL_DBGMCU_FREEZE_WWDG()            SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_WWDG_STOP)
 #define __HAL_DBGMCU_UNFREEZE_WWDG()          CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_WWDG_STOP)
 
 /**
-  * @brief  IWDG Peripherals Debug mode 
+  * @brief  IWDG Peripherals Debug mode
   */
 #define __HAL_DBGMCU_FREEZE_IWDG()            SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_IWDG_STOP)
 #define __HAL_DBGMCU_UNFREEZE_IWDG()          CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_IWDG_STOP)
 
 /**
-  * @brief  I2C1 Peripherals Debug mode 
+  * @brief  I2C1 Peripherals Debug mode
   */
 #define __HAL_DBGMCU_FREEZE_I2C1_TIMEOUT()    SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_I2C1_SMBUS_TIMEOUT)
 #define __HAL_DBGMCU_UNFREEZE_I2C1_TIMEOUT()  CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_I2C1_SMBUS_TIMEOUT)
 
 #if defined (DBGMCU_CR_DBG_I2C2_SMBUS_TIMEOUT)
 /**
-  * @brief  I2C2 Peripherals Debug mode 
+  * @brief  I2C2 Peripherals Debug mode
   */
 #define __HAL_DBGMCU_FREEZE_I2C2_TIMEOUT()    SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_I2C2_SMBUS_TIMEOUT)
 #define __HAL_DBGMCU_UNFREEZE_I2C2_TIMEOUT()  CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_I2C2_SMBUS_TIMEOUT)
@@ -172,7 +193,7 @@
 
 #if defined (DBGMCU_CR_DBG_CAN1_STOP)
 /**
-  * @brief  CAN1 Peripherals Debug mode 
+  * @brief  CAN1 Peripherals Debug mode
   */
 #define __HAL_DBGMCU_FREEZE_CAN1()            SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_CAN1_STOP)
 #define __HAL_DBGMCU_UNFREEZE_CAN1()          CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_CAN1_STOP)
@@ -180,16 +201,16 @@
 
 #if defined (DBGMCU_CR_DBG_CAN2_STOP)
 /**
-  * @brief  CAN2 Peripherals Debug mode 
+  * @brief  CAN2 Peripherals Debug mode
   */
 #define __HAL_DBGMCU_FREEZE_CAN2()            SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_CAN2_STOP)
 #define __HAL_DBGMCU_UNFREEZE_CAN2()          CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_CAN2_STOP)
-#endif   
-   
+#endif
+
 /* Peripherals on APB2 */
 #if defined (DBGMCU_CR_DBG_TIM1_STOP)
 /**
-  * @brief  TIM1 Peripherals Debug mode 
+  * @brief  TIM1 Peripherals Debug mode
   */
 #define __HAL_DBGMCU_FREEZE_TIM1()            SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM1_STOP)
 #define __HAL_DBGMCU_UNFREEZE_TIM1()          CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM1_STOP)
@@ -197,7 +218,7 @@
 
 #if defined (DBGMCU_CR_DBG_TIM8_STOP)
 /**
-  * @brief  TIM8 Peripherals Debug mode 
+  * @brief  TIM8 Peripherals Debug mode
   */
 #define __HAL_DBGMCU_FREEZE_TIM8()            SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM8_STOP)
 #define __HAL_DBGMCU_UNFREEZE_TIM8()          CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM8_STOP)
@@ -205,7 +226,7 @@
 
 #if defined (DBGMCU_CR_DBG_TIM9_STOP)
 /**
-  * @brief  TIM9 Peripherals Debug mode 
+  * @brief  TIM9 Peripherals Debug mode
   */
 #define __HAL_DBGMCU_FREEZE_TIM9()            SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM9_STOP)
 #define __HAL_DBGMCU_UNFREEZE_TIM9()          CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM9_STOP)
@@ -213,7 +234,7 @@
 
 #if defined (DBGMCU_CR_DBG_TIM10_STOP)
 /**
-  * @brief  TIM10 Peripherals Debug mode 
+  * @brief  TIM10 Peripherals Debug mode
   */
 #define __HAL_DBGMCU_FREEZE_TIM10()            SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM10_STOP)
 #define __HAL_DBGMCU_UNFREEZE_TIM10()          CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM10_STOP)
@@ -221,7 +242,7 @@
 
 #if defined (DBGMCU_CR_DBG_TIM11_STOP)
 /**
-  * @brief  TIM11 Peripherals Debug mode 
+  * @brief  TIM11 Peripherals Debug mode
   */
 #define __HAL_DBGMCU_FREEZE_TIM11()            SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM11_STOP)
 #define __HAL_DBGMCU_UNFREEZE_TIM11()          CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM11_STOP)
@@ -230,7 +251,7 @@
 
 #if defined (DBGMCU_CR_DBG_TIM15_STOP)
 /**
-  * @brief  TIM15 Peripherals Debug mode 
+  * @brief  TIM15 Peripherals Debug mode
   */
 #define __HAL_DBGMCU_FREEZE_TIM15()            SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM15_STOP)
 #define __HAL_DBGMCU_UNFREEZE_TIM15()          CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM15_STOP)
@@ -238,7 +259,7 @@
 
 #if defined (DBGMCU_CR_DBG_TIM16_STOP)
 /**
-  * @brief  TIM16 Peripherals Debug mode 
+  * @brief  TIM16 Peripherals Debug mode
   */
 #define __HAL_DBGMCU_FREEZE_TIM16()            SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM16_STOP)
 #define __HAL_DBGMCU_UNFREEZE_TIM16()          CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM16_STOP)
@@ -246,7 +267,7 @@
 
 #if defined (DBGMCU_CR_DBG_TIM17_STOP)
 /**
-  * @brief  TIM17 Peripherals Debug mode 
+  * @brief  TIM17 Peripherals Debug mode
   */
 #define __HAL_DBGMCU_FREEZE_TIM17()            SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM17_STOP)
 #define __HAL_DBGMCU_UNFREEZE_TIM17()          CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM17_STOP)
@@ -256,6 +277,12 @@
   * @}
   */
 
+/** @defgroup HAL_Private_Macros HAL Private Macros
+  * @{
+  */
+#define IS_TICKFREQ(FREQ) (((FREQ) == HAL_TICK_FREQ_10HZ)  || \
+                           ((FREQ) == HAL_TICK_FREQ_100HZ) || \
+                           ((FREQ) == HAL_TICK_FREQ_1KHZ))
 /**
   * @}
   */
@@ -272,7 +299,7 @@ HAL_StatusTypeDef HAL_Init(void);
 HAL_StatusTypeDef HAL_DeInit(void);
 void HAL_MspInit(void);
 void HAL_MspDeInit(void);
-HAL_StatusTypeDef HAL_InitTick (uint32_t TickPriority);
+HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority);
 /**
   * @}
   */
@@ -282,8 +309,11 @@ HAL_StatusTypeDef HAL_InitTick (uint32_t TickPriority);
   */
 /* Peripheral Control functions  ************************************************/
 void HAL_IncTick(void);
-void HAL_Delay(__IO uint32_t Delay);
+void HAL_Delay(uint32_t Delay);
 uint32_t HAL_GetTick(void);
+uint32_t HAL_GetTickPrio(void);
+HAL_StatusTypeDef HAL_SetTickFreq(HAL_TickFreqTypeDef Freq);
+HAL_TickFreqTypeDef HAL_GetTickFreq(void);
 void HAL_SuspendTick(void);
 void HAL_ResumeTick(void);
 uint32_t HAL_GetHalVersion(void);
@@ -326,8 +356,8 @@ void HAL_GetUID(uint32_t *UID);
 
 /**
   * @}
-  */ 
-  
+  */
+
 #ifdef __cplusplus
 }
 #endif

workspace/TS100/HAL_Driver/Inc/stm32f1xx_hal_adc.h

@@ -2,8 +2,6 @@
   ******************************************************************************
   * @file    stm32f1xx_hal_adc.h
   * @author  MCD Application Team
-  * @version V1.1.1
-  * @date    12-May-2017
   * @brief   Header file containing functions prototypes of ADC HAL library.
   ******************************************************************************
   * @attention

workspace/TS100/HAL_Driver/Inc/stm32f1xx_hal_adc_ex.h

@@ -2,8 +2,6 @@
   ******************************************************************************
   * @file    stm32f1xx_hal_adc_ex.h
   * @author  MCD Application Team
-  * @version V1.1.1
-  * @date    12-May-2017
   * @brief   Header file of ADC HAL extension module.
   ******************************************************************************
   * @attention

workspace/TS100/HAL_Driver/Inc/stm32f1xx_hal_cec.h

@@ -2,8 +2,6 @@
   ******************************************************************************
   * @file    stm32f1xx_hal_cec.h
   * @author  MCD Application Team
-  * @version V1.1.1
-  * @date    12-May-2017
   * @brief   Header file of CEC HAL module.
   ******************************************************************************
   * @attention

workspace/TS100/HAL_Driver/Inc/stm32f1xx_hal_conf_template.h

@@ -0,0 +1,386 @@
+/**
+  ******************************************************************************
+  * @file    stm32f1xx_hal_conf.h
+  * @author  MCD Application Team
+  * @brief   HAL configuration template file.
+  *          This file should be copied to the application folder and renamed
+  *          to stm32f1xx_hal_conf.h.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F1xx_HAL_CONF_H
+#define __STM32F1xx_HAL_CONF_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/* ########################## Module Selection ############################## */
+/**
+  * @brief This is the list of modules to be used in the HAL driver
+  */
+#define HAL_MODULE_ENABLED
+#define HAL_ADC_MODULE_ENABLED
+#define HAL_CAN_MODULE_ENABLED
+/* #define HAL_CAN_LEGACY_MODULE_ENABLED */
+#define HAL_CEC_MODULE_ENABLED
+#define HAL_CORTEX_MODULE_ENABLED
+#define HAL_CRC_MODULE_ENABLED
+#define HAL_DAC_MODULE_ENABLED
+#define HAL_DMA_MODULE_ENABLED
+#define HAL_ETH_MODULE_ENABLED
+#define HAL_FLASH_MODULE_ENABLED
+#define HAL_GPIO_MODULE_ENABLED
+#define HAL_HCD_MODULE_ENABLED
+#define HAL_I2C_MODULE_ENABLED
+#define HAL_I2S_MODULE_ENABLED
+#define HAL_IRDA_MODULE_ENABLED
+#define HAL_IWDG_MODULE_ENABLED
+#define HAL_NAND_MODULE_ENABLED
+#define HAL_NOR_MODULE_ENABLED
+#define HAL_PCCARD_MODULE_ENABLED
+#define HAL_PCD_MODULE_ENABLED
+#define HAL_PWR_MODULE_ENABLED
+#define HAL_RCC_MODULE_ENABLED
+#define HAL_RTC_MODULE_ENABLED
+#define HAL_SD_MODULE_ENABLED
+#define HAL_SMARTCARD_MODULE_ENABLED
+#define HAL_SPI_MODULE_ENABLED
+#define HAL_SRAM_MODULE_ENABLED
+#define HAL_TIM_MODULE_ENABLED
+#define HAL_UART_MODULE_ENABLED
+#define HAL_USART_MODULE_ENABLED
+#define HAL_WWDG_MODULE_ENABLED
+#define HAL_MMC_MODULE_ENABLED
+
+/* ########################## Oscillator Values adaptation ####################*/
+/**
+  * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
+  *        This value is used by the RCC HAL module to compute the system frequency
+  *        (when HSE is used as system clock source, directly or through the PLL).
+  */
+#if !defined  (HSE_VALUE)
+#if defined(USE_STM3210C_EVAL)
+#define HSE_VALUE    25000000U /*!< Value of the External oscillator in Hz */
+#else
+#define HSE_VALUE    8000000U /*!< Value of the External oscillator in Hz */
+#endif
+#endif /* HSE_VALUE */
+
+#if !defined  (HSE_STARTUP_TIMEOUT)
+#define HSE_STARTUP_TIMEOUT    100U      /*!< Time out for HSE start up, in ms */
+#endif /* HSE_STARTUP_TIMEOUT */
+
+/**
+  * @brief Internal High Speed oscillator (HSI) value.
+  *        This value is used by the RCC HAL module to compute the system frequency
+  *        (when HSI is used as system clock source, directly or through the PLL).
+  */
+#if !defined  (HSI_VALUE)
+#define HSI_VALUE              8000000U  /*!< Value of the Internal oscillator in Hz */
+#endif /* HSI_VALUE */
+
+/**
+  * @brief Internal Low Speed oscillator (LSI) value.
+  */
+#if !defined  (LSI_VALUE)
+#define LSI_VALUE               32000U     /*!< LSI Typical Value in Hz */
+#endif /* LSI_VALUE */                     /*!< Value of the Internal Low Speed oscillator in Hz
+                                                The real value may vary depending on the variations
+                                                in voltage and temperature. */
+/**
+  * @brief External Low Speed oscillator (LSE) value.
+  *        This value is used by the UART, RTC HAL module to compute the system frequency
+  */
+#if !defined  (LSE_VALUE)
+#define LSE_VALUE               32768U    /*!< Value of the External Low Speed oscillator in Hz */
+#endif /* LSE_VALUE */
+
+#if !defined  (LSE_STARTUP_TIMEOUT)
+#define LSE_STARTUP_TIMEOUT    5000U     /*!< Time out for LSE start up, in ms */
+#endif /* LSE_STARTUP_TIMEOUT */
+
+/* Tip: To avoid modifying this file each time you need to use different HSE,
+   ===  you can define the HSE value in your toolchain compiler preprocessor. */
+
+/* ########################### System Configuration ######################### */
+/**
+  * @brief This is the HAL system configuration section
+  */
+#define  VDD_VALUE                    3300U /*!< Value of VDD in mv */
+#define  TICK_INT_PRIORITY            0x0FU /*!< tick interrupt priority */
+#define  USE_RTOS                     0U
+#define  PREFETCH_ENABLE              1U
+
+/* ########################## Assert Selection ############################## */
+/**
+  * @brief Uncomment the line below to expanse the "assert_param" macro in the
+  *        HAL drivers code
+  */
+/* #define USE_FULL_ASSERT    1U */
+
+/* ################## Ethernet peripheral configuration ##################### */
+
+/* Section 1 : Ethernet peripheral configuration */
+
+/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */
+#define MAC_ADDR0   2U
+#define MAC_ADDR1   0U
+#define MAC_ADDR2   0U
+#define MAC_ADDR3   0U
+#define MAC_ADDR4   0U
+#define MAC_ADDR5   0U
+
+/* Definition of the Ethernet driver buffers size and count */
+#define ETH_RX_BUF_SIZE                ETH_MAX_PACKET_SIZE /* buffer size for receive               */
+#define ETH_TX_BUF_SIZE                ETH_MAX_PACKET_SIZE /* buffer size for transmit              */
+#define ETH_RXBUFNB                    8U                  /* 8 Rx buffers of size ETH_RX_BUF_SIZE  */
+#define ETH_TXBUFNB                    4U                  /* 4 Tx buffers of size ETH_TX_BUF_SIZE  */
+
+/* Section 2: PHY configuration section */
+
+/* DP83848 PHY Address*/
+#define DP83848_PHY_ADDRESS             0x01U
+/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/
+#define PHY_RESET_DELAY                 0x000000FFU
+/* PHY Configuration delay */
+#define PHY_CONFIG_DELAY                0x00000FFFU
+
+#define PHY_READ_TO                     0x0000FFFFU
+#define PHY_WRITE_TO                    0x0000FFFFU
+
+/* Section 3: Common PHY Registers */
+
+#define PHY_BCR                         ((uint16_t)0x0000)  /*!< Transceiver Basic Control Register   */
+#define PHY_BSR                         ((uint16_t)0x0001)  /*!< Transceiver Basic Status Register    */
+
+#define PHY_RESET                       ((uint16_t)0x8000)  /*!< PHY Reset */
+#define PHY_LOOPBACK                    ((uint16_t)0x4000)  /*!< Select loop-back mode */
+#define PHY_FULLDUPLEX_100M             ((uint16_t)0x2100)  /*!< Set the full-duplex mode at 100 Mb/s */
+#define PHY_HALFDUPLEX_100M             ((uint16_t)0x2000)  /*!< Set the half-duplex mode at 100 Mb/s */
+#define PHY_FULLDUPLEX_10M              ((uint16_t)0x0100)  /*!< Set the full-duplex mode at 10 Mb/s  */
+#define PHY_HALFDUPLEX_10M              ((uint16_t)0x0000)  /*!< Set the half-duplex mode at 10 Mb/s  */
+#define PHY_AUTONEGOTIATION             ((uint16_t)0x1000)  /*!< Enable auto-negotiation function     */
+#define PHY_RESTART_AUTONEGOTIATION     ((uint16_t)0x0200)  /*!< Restart auto-negotiation function    */
+#define PHY_POWERDOWN                   ((uint16_t)0x0800)  /*!< Select the power down mode           */
+#define PHY_ISOLATE                     ((uint16_t)0x0400)  /*!< Isolate PHY from MII                 */
+
+#define PHY_AUTONEGO_COMPLETE           ((uint16_t)0x0020)  /*!< Auto-Negotiation process completed   */
+#define PHY_LINKED_STATUS               ((uint16_t)0x0004)  /*!< Valid link established               */
+#define PHY_JABBER_DETECTION            ((uint16_t)0x0002)  /*!< Jabber condition detected            */
+
+/* Section 4: Extended PHY Registers */
+
+#define PHY_SR                          ((uint16_t)0x0010)  /*!< PHY status register Offset                      */
+#define PHY_MICR                        ((uint16_t)0x0011)  /*!< MII Interrupt Control Register                  */
+#define PHY_MISR                        ((uint16_t)0x0012)  /*!< MII Interrupt Status and Misc. Control Register */
+
+#define PHY_LINK_STATUS                 ((uint16_t)0x0001)  /*!< PHY Link mask                                   */
+#define PHY_SPEED_STATUS                ((uint16_t)0x0002)  /*!< PHY Speed mask                                  */
+#define PHY_DUPLEX_STATUS               ((uint16_t)0x0004)  /*!< PHY Duplex mask                                 */
+
+#define PHY_MICR_INT_EN                 ((uint16_t)0x0002)  /*!< PHY Enable interrupts                           */
+#define PHY_MICR_INT_OE                 ((uint16_t)0x0001)  /*!< PHY Enable output interrupt events              */
+
+#define PHY_MISR_LINK_INT_EN            ((uint16_t)0x0020)  /*!< Enable Interrupt on change of link status       */
+#define PHY_LINK_INTERRUPT              ((uint16_t)0x2000)  /*!< PHY link status interrupt mask                  */
+
+/* ################## SPI peripheral configuration ########################## */
+
+/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver
+* Activated: CRC code is present inside driver
+* Deactivated: CRC code cleaned from driver
+*/
+
+#define USE_SPI_CRC                     1U
+
+/* Includes ------------------------------------------------------------------*/
+/**
+  * @brief Include module's header file
+  */
+
+#ifdef HAL_RCC_MODULE_ENABLED
+#include "stm32f1xx_hal_rcc.h"
+#endif /* HAL_RCC_MODULE_ENABLED */
+
+#ifdef HAL_GPIO_MODULE_ENABLED
+#include "stm32f1xx_hal_gpio.h"
+#endif /* HAL_GPIO_MODULE_ENABLED */
+
+#ifdef HAL_DMA_MODULE_ENABLED
+#include "stm32f1xx_hal_dma.h"
+#endif /* HAL_DMA_MODULE_ENABLED */
+
+#ifdef HAL_ETH_MODULE_ENABLED
+#include "stm32f1xx_hal_eth.h"
+#endif /* HAL_ETH_MODULE_ENABLED */
+
+#ifdef HAL_CAN_MODULE_ENABLED
+#include "stm32f1xx_hal_can.h"
+#endif /* HAL_CAN_MODULE_ENABLED */
+
+#ifdef HAL_CAN_LEGACY_MODULE_ENABLED
+  #include "Legacy/stm32f1xx_hal_can_legacy.h"
+#endif /* HAL_CAN_LEGACY_MODULE_ENABLED */
+
+#ifdef HAL_CEC_MODULE_ENABLED
+#include "stm32f1xx_hal_cec.h"
+#endif /* HAL_CEC_MODULE_ENABLED */
+
+#ifdef HAL_CORTEX_MODULE_ENABLED
+#include "stm32f1xx_hal_cortex.h"
+#endif /* HAL_CORTEX_MODULE_ENABLED */
+
+#ifdef HAL_ADC_MODULE_ENABLED
+#include "stm32f1xx_hal_adc.h"
+#endif /* HAL_ADC_MODULE_ENABLED */
+
+#ifdef HAL_CRC_MODULE_ENABLED
+#include "stm32f1xx_hal_crc.h"
+#endif /* HAL_CRC_MODULE_ENABLED */
+
+#ifdef HAL_DAC_MODULE_ENABLED
+#include "stm32f1xx_hal_dac.h"
+#endif /* HAL_DAC_MODULE_ENABLED */
+
+#ifdef HAL_FLASH_MODULE_ENABLED
+#include "stm32f1xx_hal_flash.h"
+#endif /* HAL_FLASH_MODULE_ENABLED */
+
+#ifdef HAL_SRAM_MODULE_ENABLED
+#include "stm32f1xx_hal_sram.h"
+#endif /* HAL_SRAM_MODULE_ENABLED */
+
+#ifdef HAL_NOR_MODULE_ENABLED
+#include "stm32f1xx_hal_nor.h"
+#endif /* HAL_NOR_MODULE_ENABLED */
+
+#ifdef HAL_I2C_MODULE_ENABLED
+#include "stm32f1xx_hal_i2c.h"
+#endif /* HAL_I2C_MODULE_ENABLED */
+
+#ifdef HAL_I2S_MODULE_ENABLED
+#include "stm32f1xx_hal_i2s.h"
+#endif /* HAL_I2S_MODULE_ENABLED */
+
+#ifdef HAL_IWDG_MODULE_ENABLED
+#include "stm32f1xx_hal_iwdg.h"
+#endif /* HAL_IWDG_MODULE_ENABLED */
+
+#ifdef HAL_PWR_MODULE_ENABLED
+#include "stm32f1xx_hal_pwr.h"
+#endif /* HAL_PWR_MODULE_ENABLED */
+
+#ifdef HAL_RTC_MODULE_ENABLED
+#include "stm32f1xx_hal_rtc.h"
+#endif /* HAL_RTC_MODULE_ENABLED */
+
+#ifdef HAL_PCCARD_MODULE_ENABLED
+#include "stm32f1xx_hal_pccard.h"
+#endif /* HAL_PCCARD_MODULE_ENABLED */
+
+#ifdef HAL_SD_MODULE_ENABLED
+#include "stm32f1xx_hal_sd.h"
+#endif /* HAL_SD_MODULE_ENABLED */
+
+#ifdef HAL_NAND_MODULE_ENABLED
+#include "stm32f1xx_hal_nand.h"
+#endif /* HAL_NAND_MODULE_ENABLED */
+
+#ifdef HAL_SPI_MODULE_ENABLED
+#include "stm32f1xx_hal_spi.h"
+#endif /* HAL_SPI_MODULE_ENABLED */
+
+#ifdef HAL_TIM_MODULE_ENABLED
+#include "stm32f1xx_hal_tim.h"
+#endif /* HAL_TIM_MODULE_ENABLED */
+
+#ifdef HAL_UART_MODULE_ENABLED
+#include "stm32f1xx_hal_uart.h"
+#endif /* HAL_UART_MODULE_ENABLED */
+
+#ifdef HAL_USART_MODULE_ENABLED
+#include "stm32f1xx_hal_usart.h"
+#endif /* HAL_USART_MODULE_ENABLED */
+
+#ifdef HAL_IRDA_MODULE_ENABLED
+#include "stm32f1xx_hal_irda.h"
+#endif /* HAL_IRDA_MODULE_ENABLED */
+
+#ifdef HAL_SMARTCARD_MODULE_ENABLED
+#include "stm32f1xx_hal_smartcard.h"
+#endif /* HAL_SMARTCARD_MODULE_ENABLED */
+
+#ifdef HAL_WWDG_MODULE_ENABLED
+#include "stm32f1xx_hal_wwdg.h"
+#endif /* HAL_WWDG_MODULE_ENABLED */
+
+#ifdef HAL_PCD_MODULE_ENABLED
+#include "stm32f1xx_hal_pcd.h"
+#endif /* HAL_PCD_MODULE_ENABLED */
+
+#ifdef HAL_HCD_MODULE_ENABLED
+#include "stm32f1xx_hal_hcd.h"
+#endif /* HAL_HCD_MODULE_ENABLED */
+
+#ifdef HAL_MMC_MODULE_ENABLED
+#include "stm32f1xx_hal_mmc.h"
+#endif /* HAL_MMC_MODULE_ENABLED */
+
+/* Exported macro ------------------------------------------------------------*/
+#ifdef  USE_FULL_ASSERT
+/**
+  * @brief  The assert_param macro is used for function's parameters check.
+  * @param  expr: If expr is false, it calls assert_failed function
+  *         which reports the name of the source file and the source
+  *         line number of the call that failed.
+  *         If expr is true, it returns no value.
+  * @retval None
+  */
+#define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
+/* Exported functions ------------------------------------------------------- */
+void assert_failed(uint8_t *file, uint32_t line);
+#else
+#define assert_param(expr) ((void)0U)
+#endif /* USE_FULL_ASSERT */
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F1xx_HAL_CONF_H */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

workspace/TS100/HAL_Driver/Inc/stm32f1xx_hal_cortex.h

@@ -2,8 +2,6 @@
   ******************************************************************************
   * @file    stm32f1xx_hal_cortex.h
   * @author  MCD Application Team
-  * @version V1.1.1
-  * @date    12-May-2017
   * @brief   Header file of CORTEX HAL module.
   ******************************************************************************
   * @attention

workspace/TS100/HAL_Driver/Inc/stm32f1xx_hal_crc.h

@@ -2,8 +2,6 @@
   ******************************************************************************
   * @file    stm32f1xx_hal_crc.h
   * @author  MCD Application Team
-  * @version V1.1.1
-  * @date    12-May-2017
   * @brief   Header file of CRC HAL module.
   ******************************************************************************
   * @attention

workspace/TS100/HAL_Driver/Inc/stm32f1xx_hal_dac.h

@@ -2,8 +2,6 @@
   ******************************************************************************
   * @file    stm32f1xx_hal_dac.h
   * @author  MCD Application Team
-  * @version V1.1.1
-  * @date    12-May-2017
   * @brief   Header file of DAC HAL module.
   ******************************************************************************
   * @attention

workspace/TS100/HAL_Driver/Inc/stm32f1xx_hal_dac_ex.h

@@ -2,8 +2,6 @@
   ******************************************************************************
   * @file    stm32f1xx_hal_dac_ex.h
   * @author  MCD Application Team
-  * @version V1.1.1
-  * @date    12-May-2017
   * @brief   Header file of DAC HAL Extension module.
   ******************************************************************************
   * @attention

workspace/TS100/HAL_Driver/Inc/stm32f1xx_hal_def.h

@@ -2,10 +2,8 @@
   ******************************************************************************
   * @file    stm32f1xx_hal_def.h
   * @author  MCD Application Team
-  * @version V1.1.1
-  * @date    12-May-2017
-  * @brief   This file contains HAL common defines, enumeration, macros and 
-  *          structures definitions. 
+  * @brief   This file contains HAL common defines, enumeration, macros and
+  *          structures definitions.
   ******************************************************************************
   * @attention
   *
@@ -41,7 +39,7 @@
 #define __STM32F1xx_HAL_DEF
 
 #ifdef __cplusplus
- extern "C" {
+extern "C" {
 #endif
 
 /* Includes ------------------------------------------------------------------*/
@@ -53,10 +51,10 @@
 
 /* Exported types ------------------------------------------------------------*/
 
-/** 
-  * @brief  HAL Status structures definition  
-  */  
-typedef enum 
+/**
+  * @brief  HAL Status structures definition
+  */
+typedef enum
 {
   HAL_OK       = 0x00U,
   HAL_ERROR    = 0x01U,
@@ -64,20 +62,20 @@ typedef enum
   HAL_TIMEOUT  = 0x03U
 } HAL_StatusTypeDef;
 
-/** 
-  * @brief  HAL Lock structures definition  
+/**
+  * @brief  HAL Lock structures definition
   */
-typedef enum 
+typedef enum
 {
   HAL_UNLOCKED = 0x00U,
-  HAL_LOCKED   = 0x01U  
+  HAL_LOCKED   = 0x01U
 } HAL_LockTypeDef;
 
 /* Exported macro ------------------------------------------------------------*/
 #define HAL_MAX_DELAY      0xFFFFFFFFU
 
-#define HAL_IS_BIT_SET(REG, BIT)         (((REG) & (BIT)) != RESET)
-#define HAL_IS_BIT_CLR(REG, BIT)         (((REG) & (BIT)) == RESET)
+#define HAL_IS_BIT_SET(REG, BIT)         (((REG) & (BIT)) != 0U)
+#define HAL_IS_BIT_CLR(REG, BIT)         (((REG) & (BIT)) == 0U)
 
 #define __HAL_LINKDMA(__HANDLE__, __PPP_DMA_FIELD__, __DMA_HANDLE__)               \
                         do{                                                      \
@@ -85,15 +83,15 @@ typedef enum
                               (__DMA_HANDLE__).Parent = (__HANDLE__);             \
                           } while(0U)
 
-#define UNUSED(x) ((void)(x))
+#define UNUSED(X) (void)X      /* To avoid gcc/g++ warnings */
 
 /** @brief Reset the Handle's State field.
   * @param __HANDLE__: specifies the Peripheral Handle.
-  * @note  This macro can be used for the following purpose: 
+  * @note  This macro can be used for the following purpose:
   *          - When the Handle is declared as local variable; before passing it as parameter
-  *            to HAL_PPP_Init() for the first time, it is mandatory to use this macro 
+  *            to HAL_PPP_Init() for the first time, it is mandatory to use this macro
   *            to set to 0 the Handle's "State" field.
-  *            Otherwise, "State" field may have any random value and the first time the function 
+  *            Otherwise, "State" field may have any random value and the first time the function
   *            HAL_PPP_Init() is called, the low level hardware initialization will be missed
   *            (i.e. HAL_PPP_MspInit() will not be executed).
   *          - When there is a need to reconfigure the low level hardware: instead of calling
@@ -105,10 +103,10 @@ typedef enum
 #define __HAL_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = 0U)
 
 #if (USE_RTOS == 1U)
-  /* Reserved for future use */
-  #error "USE_RTOS should be 0 in the current HAL release"
+/* Reserved for future use */
+#error "USE_RTOS should be 0 in the current HAL release"
 #else
-  #define __HAL_LOCK(__HANDLE__)                                           \
+#define __HAL_LOCK(__HANDLE__)                                           \
                                 do{                                        \
                                     if((__HANDLE__)->Lock == HAL_LOCKED)   \
                                     {                                      \
@@ -120,82 +118,82 @@ typedef enum
                                     }                                      \
                                   }while (0U)
 
-  #define __HAL_UNLOCK(__HANDLE__)                                          \
+#define __HAL_UNLOCK(__HANDLE__)                                          \
                                   do{                                       \
                                       (__HANDLE__)->Lock = HAL_UNLOCKED;    \
                                     }while (0U)
 #endif /* USE_RTOS */
 
-#if  defined ( __GNUC__ )
-  #ifndef __weak
-    #define __weak   __attribute__((weak))
-  #endif /* __weak */
-  #ifndef __packed
-    #define __packed __attribute__((__packed__))
-  #endif /* __packed */
+#if defined ( __GNUC__ ) && !defined (__CC_ARM) /* GNU Compiler */
+#ifndef __weak
+#define __weak   __attribute__((weak))
+#endif /* __weak */
+#ifndef __packed
+#define __packed __attribute__((__packed__))
+#endif /* __packed */
 #endif /* __GNUC__ */
 
 
 /* Macro to get variable aligned on 4-bytes, for __ICCARM__ the directive "#pragma data_alignment=4" must be used instead */
-#if defined   (__GNUC__)        /* GNU Compiler */
-  #ifndef __ALIGN_END
-    #define __ALIGN_END    __attribute__ ((aligned (4)))
-  #endif /* __ALIGN_END */
-  #ifndef __ALIGN_BEGIN  
-    #define __ALIGN_BEGIN
-  #endif /* __ALIGN_BEGIN */
+#if defined ( __GNUC__ ) && !defined (__CC_ARM) /* GNU Compiler */
+#ifndef __ALIGN_END
+#define __ALIGN_END    __attribute__ ((aligned (4)))
+#endif /* __ALIGN_END */
+#ifndef __ALIGN_BEGIN
+#define __ALIGN_BEGIN
+#endif /* __ALIGN_BEGIN */
 #else
-  #ifndef __ALIGN_END
-    #define __ALIGN_END
-  #endif /* __ALIGN_END */
-  #ifndef __ALIGN_BEGIN      
-    #if defined   (__CC_ARM)      /* ARM Compiler */
-      #define __ALIGN_BEGIN    __align(4)
-    #elif defined (__ICCARM__)    /* IAR Compiler */
-      #define __ALIGN_BEGIN 
-    #endif /* __CC_ARM */
-  #endif /* __ALIGN_BEGIN */
+#ifndef __ALIGN_END
+#define __ALIGN_END
+#endif /* __ALIGN_END */
+#ifndef __ALIGN_BEGIN
+#if defined   (__CC_ARM)      /* ARM Compiler */
+#define __ALIGN_BEGIN    __align(4)
+#elif defined (__ICCARM__)    /* IAR Compiler */
+#define __ALIGN_BEGIN
+#endif /* __CC_ARM */
+#endif /* __ALIGN_BEGIN */
 #endif /* __GNUC__ */
 
 
-/** 
+/**
   * @brief  __RAM_FUNC definition
-  */ 
+  */
 #if defined ( __CC_ARM   )
 /* ARM Compiler
    ------------
-   RAM functions are defined using the toolchain options. 
+   RAM functions are defined using the toolchain options.
    Functions that are executed in RAM should reside in a separate source module.
-   Using the 'Options for File' dialog you can simply change the 'Code / Const' 
+   Using the 'Options for File' dialog you can simply change the 'Code / Const'
    area of a module to a memory space in physical RAM.
    Available memory areas are declared in the 'Target' tab of the 'Options for Target'
-   dialog. 
+   dialog.
 */
-#define __RAM_FUNC HAL_StatusTypeDef 
+#define __RAM_FUNC
 
 #elif defined ( __ICCARM__ )
 /* ICCARM Compiler
    ---------------
-   RAM functions are defined using a specific toolchain keyword "__ramfunc". 
+   RAM functions are defined using a specific toolchain keyword "__ramfunc".
 */
-#define __RAM_FUNC __ramfunc HAL_StatusTypeDef
+#define __RAM_FUNC __ramfunc
 
 #elif defined   (  __GNUC__  )
 /* GNU Compiler
    ------------
-  RAM functions are defined using a specific toolchain attribute 
+  RAM functions are defined using a specific toolchain attribute
    "__attribute__((section(".RamFunc")))".
 */
-#define __RAM_FUNC HAL_StatusTypeDef  __attribute__((section(".RamFunc")))
+#define __RAM_FUNC __attribute__((section(".RamFunc")))
 
 #endif
 
-/** 
+/**
   * @brief  __NOINLINE definition
-  */ 
+  */
 #if defined ( __CC_ARM   ) || defined   (  __GNUC__  )
-/* ARM & GNUCompiler 
-   ---------------- 
+/* ARM & GNUCompiler
+   ----------------
 */
 #define __NOINLINE __attribute__ ( (noinline) )
 

workspace/TS100/HAL_Driver/Inc/stm32f1xx_hal_dma.h

@@ -2,8 +2,6 @@
   ******************************************************************************
   * @file    stm32f1xx_hal_dma.h
   * @author  MCD Application Team
-  * @version V1.1.1
-  * @date    12-May-2017
   * @brief   Header file of DMA HAL module.
   ******************************************************************************
   * @attention

workspace/TS100/HAL_Driver/Inc/stm32f1xx_hal_dma_ex.h

@@ -2,8 +2,6 @@
   ******************************************************************************
   * @file    stm32f1xx_hal_dma_ex.h
   * @author  MCD Application Team
-  * @version V1.1.1
-  * @date    12-May-2017
   * @brief   Header file of DMA HAL extension module.
   ******************************************************************************
   * @attention

workspace/TS100/HAL_Driver/Inc/stm32f1xx_hal_flash.h

@@ -2,8 +2,6 @@
   ******************************************************************************
   * @file    stm32f1xx_hal_flash.h
   * @author  MCD Application Team
-  * @version V1.1.1
-  * @date    12-May-2017
   * @brief   Header file of Flash HAL module.
   ******************************************************************************
   * @attention

workspace/TS100/HAL_Driver/Inc/stm32f1xx_hal_flash_ex.h

@@ -2,8 +2,6 @@
   ******************************************************************************
   * @file    stm32f1xx_hal_flash_ex.h
   * @author  MCD Application Team
-  * @version V1.1.1
-  * @date    12-May-2017
   * @brief   Header file of Flash HAL Extended module.
   ******************************************************************************
   * @attention

workspace/TS100/HAL_Driver/Inc/stm32f1xx_hal_gpio.h

@@ -2,8 +2,6 @@
   ******************************************************************************
   * @file    stm32f1xx_hal_gpio.h
   * @author  MCD Application Team
-  * @version V1.1.1
-  * @date    12-May-2017
   * @brief   Header file of GPIO HAL module.
   ******************************************************************************
   * @attention
@@ -33,14 +31,14 @@
   * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
   *
   ******************************************************************************
-  */ 
+  */
 
 /* Define to prevent recursive inclusion -------------------------------------*/
 #ifndef __STM32F1xx_HAL_GPIO_H
 #define __STM32F1xx_HAL_GPIO_H
 
 #ifdef __cplusplus
- extern "C" {
+extern "C" {
 #endif
 
 /* Includes ------------------------------------------------------------------*/
@@ -52,16 +50,16 @@
 
 /** @addtogroup GPIO
   * @{
-  */ 
+  */
 
 /* Exported types ------------------------------------------------------------*/
 /** @defgroup GPIO_Exported_Types GPIO Exported Types
   * @{
   */
 
-/** 
-  * @brief GPIO Init structure definition  
-  */ 
+/**
+  * @brief GPIO Init structure definition
+  */
 typedef struct
 {
   uint32_t Pin;       /*!< Specifies the GPIO pins to be configured.
@@ -75,16 +73,16 @@ typedef struct
 
   uint32_t Speed;     /*!< Specifies the speed for the selected pins.
                            This parameter can be a value of @ref GPIO_speed_define */
-}GPIO_InitTypeDef;
+} GPIO_InitTypeDef;
 
-/** 
-  * @brief  GPIO Bit SET and Bit RESET enumeration 
+/**
+  * @brief  GPIO Bit SET and Bit RESET enumeration
   */
 typedef enum
 {
   GPIO_PIN_RESET = 0U,
   GPIO_PIN_SET
-}GPIO_PinState;
+} GPIO_PinState;
 /**
   * @}
   */
@@ -93,7 +91,7 @@ typedef enum
 
 /** @defgroup GPIO_Exported_Constants GPIO Exported Constants
   * @{
-  */ 
+  */
 
 /** @defgroup GPIO_pins_define GPIO pins define
   * @{
@@ -122,15 +120,15 @@ typedef enum
   */
 
 /** @defgroup GPIO_mode_define GPIO mode define
-  * @brief GPIO Configuration Mode 
+  * @brief GPIO Configuration Mode
   *        Elements values convention: 0xX0yz00YZ
   *           - X  : GPIO mode or EXTI Mode
-  *           - y  : External IT or Event trigger detection 
+  *           - y  : External IT or Event trigger detection
   *           - z  : IO configuration on External IT or Event
   *           - Y  : Output type (Push Pull or Open Drain)
   *           - Z  : IO Direction mode (Input, Output, Alternate or Analog)
   * @{
-  */ 
+  */
 #define  GPIO_MODE_INPUT                        0x00000000U   /*!< Input Floating Mode                   */
 #define  GPIO_MODE_OUTPUT_PP                    0x00000001U   /*!< Output Push Pull Mode                 */
 #define  GPIO_MODE_OUTPUT_OD                    0x00000011U   /*!< Output Open Drain Mode                */
@@ -139,11 +137,11 @@ typedef enum
 #define  GPIO_MODE_AF_INPUT                     GPIO_MODE_INPUT          /*!< Alternate Function Input Mode         */
 
 #define  GPIO_MODE_ANALOG                       0x00000003U   /*!< Analog Mode  */
-    
+
 #define  GPIO_MODE_IT_RISING                    0x10110000U   /*!< External Interrupt Mode with Rising edge trigger detection          */
 #define  GPIO_MODE_IT_FALLING                   0x10210000U   /*!< External Interrupt Mode with Falling edge trigger detection         */
 #define  GPIO_MODE_IT_RISING_FALLING            0x10310000U   /*!< External Interrupt Mode with Rising/Falling edge trigger detection  */
- 
+
 #define  GPIO_MODE_EVT_RISING                   0x10120000U   /*!< External Event Mode with Rising edge trigger detection               */
 #define  GPIO_MODE_EVT_FALLING                  0x10220000U   /*!< External Event Mode with Falling edge trigger detection              */
 #define  GPIO_MODE_EVT_RISING_FALLING           0x10320000U   /*!< External Event Mode with Rising/Falling edge trigger detection       */
@@ -164,17 +162,17 @@ typedef enum
   * @}
   */
 
- /** @defgroup GPIO_pull_define GPIO pull define
-   * @brief GPIO Pull-Up or Pull-Down Activation
-   * @{
-   */  
+/** @defgroup GPIO_pull_define GPIO pull define
+  * @brief GPIO Pull-Up or Pull-Down Activation
+  * @{
+  */
 #define  GPIO_NOPULL        0x00000000U   /*!< No Pull-up or Pull-down activation  */
 #define  GPIO_PULLUP        0x00000001U   /*!< Pull-up activation                  */
 #define  GPIO_PULLDOWN      0x00000002U   /*!< Pull-down activation                */
 /**
   * @}
   */
-  
+
 /**
   * @}
   */
@@ -249,20 +247,20 @@ void  HAL_GPIO_DeInit(GPIO_TypeDef  *GPIOx, uint32_t GPIO_Pin);
   * @{
   */
 /* IO operation functions *****************************************************/
-GPIO_PinState HAL_GPIO_ReadPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
-void HAL_GPIO_WritePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, GPIO_PinState PinState);
-void HAL_GPIO_TogglePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
-HAL_StatusTypeDef HAL_GPIO_LockPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
+GPIO_PinState HAL_GPIO_ReadPin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin);
+void HAL_GPIO_WritePin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin, GPIO_PinState PinState);
+void HAL_GPIO_TogglePin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin);
+HAL_StatusTypeDef HAL_GPIO_LockPin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin);
 void HAL_GPIO_EXTI_IRQHandler(uint16_t GPIO_Pin);
 void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin);
 
 /**
   * @}
-  */ 
+  */
 
 /**
   * @}
-  */ 
+  */
 /* Private types -------------------------------------------------------------*/
 /* Private variables ---------------------------------------------------------*/
 /* Private constants ---------------------------------------------------------*/
@@ -311,7 +309,7 @@ void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin);
 
 /**
   * @}
-  */ 
+  */
 
 /**
   * @}

workspace/TS100/HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h

@@ -2,8 +2,6 @@
   ******************************************************************************
   * @file    stm32f1xx_hal_gpio_ex.h
   * @author  MCD Application Team
-  * @version V1.1.1
-  * @date    12-May-2017
   * @brief   Header file of GPIO HAL Extension module.
   ******************************************************************************
   * @attention
@@ -33,14 +31,14 @@
   * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
   *
   ******************************************************************************
-  */ 
+  */
 
 /* Define to prevent recursive inclusion -------------------------------------*/
 #ifndef __STM32F1xx_HAL_GPIO_EX_H
 #define __STM32F1xx_HAL_GPIO_EX_H
 
 #ifdef __cplusplus
- extern "C" {
+extern "C" {
 #endif
 
 /* Includes ------------------------------------------------------------------*/
@@ -52,25 +50,23 @@
 
 /** @defgroup GPIOEx GPIOEx
   * @{
-  */ 
-
+  */
 /* Exported types ------------------------------------------------------------*/
-
 /* Exported constants --------------------------------------------------------*/
 
 /** @defgroup GPIOEx_Exported_Constants GPIOEx Exported Constants
   * @{
-  */ 
-  
+  */
+
 /** @defgroup GPIOEx_EVENTOUT EVENTOUT Cortex Configuration
   * @brief This section propose definition to use the Cortex EVENTOUT signal.
   * @{
   */
-  
-/** @defgroup GPIOEx_EVENTOUT_PIN EVENTOUT Pin 
+
+/** @defgroup GPIOEx_EVENTOUT_PIN EVENTOUT Pin
   * @{
   */
-  
+
 #define AFIO_EVENTOUT_PIN_0  AFIO_EVCR_PIN_PX0 /*!< EVENTOUT on pin 0 */
 #define AFIO_EVENTOUT_PIN_1  AFIO_EVCR_PIN_PX1 /*!< EVENTOUT on pin 1 */
 #define AFIO_EVENTOUT_PIN_2  AFIO_EVCR_PIN_PX2 /*!< EVENTOUT on pin 2 */
@@ -106,12 +102,12 @@
                                        ((__PIN__) == AFIO_EVENTOUT_PIN_15))
 /**
   * @}
-  */ 
-  
+  */
+
 /** @defgroup GPIOEx_EVENTOUT_PORT EVENTOUT Port
   * @{
   */
-  
+
 #define AFIO_EVENTOUT_PORT_A AFIO_EVCR_PORT_PA /*!< EVENTOUT on port A */
 #define AFIO_EVENTOUT_PORT_B AFIO_EVCR_PORT_PB /*!< EVENTOUT on port B */
 #define AFIO_EVENTOUT_PORT_C AFIO_EVCR_PORT_PC /*!< EVENTOUT on port C */
@@ -126,7 +122,7 @@
 /**
   * @}
   */
-  
+
 /**
   * @}
   */
@@ -135,151 +131,132 @@
   * @brief This section propose definition to remap the alternate function to some other port/pins.
   * @{
   */
-  
+
 /**
   * @brief Enable the remapping of SPI1 alternate function NSS, SCK, MISO and MOSI.
   * @note  ENABLE: Remap     (NSS/PA15, SCK/PB3, MISO/PB4, MOSI/PB5)
   * @retval None
   */
-#define __HAL_AFIO_REMAP_SPI1_ENABLE()  SET_BIT(AFIO->MAPR, AFIO_MAPR_SPI1_REMAP)
+#define __HAL_AFIO_REMAP_SPI1_ENABLE()  AFIO_REMAP_ENABLE(AFIO_MAPR_SPI1_REMAP)
 
 /**
   * @brief Disable the remapping of SPI1 alternate function NSS, SCK, MISO and MOSI.
   * @note  DISABLE: No remap (NSS/PA4,  SCK/PA5, MISO/PA6, MOSI/PA7)
   * @retval None
   */
-#define __HAL_AFIO_REMAP_SPI1_DISABLE() CLEAR_BIT(AFIO->MAPR, AFIO_MAPR_SPI1_REMAP)
+#define __HAL_AFIO_REMAP_SPI1_DISABLE()  AFIO_REMAP_DISABLE(AFIO_MAPR_SPI1_REMAP)
 
 /**
   * @brief Enable the remapping of I2C1 alternate function SCL and SDA.
   * @note  ENABLE: Remap     (SCL/PB8, SDA/PB9)
   * @retval None
   */
-#define __HAL_AFIO_REMAP_I2C1_ENABLE()  SET_BIT(AFIO->MAPR, AFIO_MAPR_I2C1_REMAP)
+#define __HAL_AFIO_REMAP_I2C1_ENABLE()  AFIO_REMAP_ENABLE(AFIO_MAPR_I2C1_REMAP)
 
 /**
   * @brief Disable the remapping of I2C1 alternate function SCL and SDA.
   * @note  DISABLE: No remap (SCL/PB6, SDA/PB7)
   * @retval None
   */
-#define __HAL_AFIO_REMAP_I2C1_DISABLE() CLEAR_BIT(AFIO->MAPR, AFIO_MAPR_I2C1_REMAP)
+#define __HAL_AFIO_REMAP_I2C1_DISABLE() AFIO_REMAP_DISABLE(AFIO_MAPR_I2C1_REMAP)
 
 /**
   * @brief Enable the remapping of USART1 alternate function TX and RX.
   * @note  ENABLE: Remap     (TX/PB6, RX/PB7)
   * @retval None
   */
-#define __HAL_AFIO_REMAP_USART1_ENABLE()  SET_BIT(AFIO->MAPR, AFIO_MAPR_USART1_REMAP)
+#define __HAL_AFIO_REMAP_USART1_ENABLE()  AFIO_REMAP_ENABLE(AFIO_MAPR_USART1_REMAP)
 
 /**
   * @brief Disable the remapping of USART1 alternate function TX and RX.
   * @note  DISABLE: No remap (TX/PA9, RX/PA10)
   * @retval None
   */
-#define __HAL_AFIO_REMAP_USART1_DISABLE() CLEAR_BIT(AFIO->MAPR, AFIO_MAPR_USART1_REMAP)
+#define __HAL_AFIO_REMAP_USART1_DISABLE() AFIO_REMAP_DISABLE(AFIO_MAPR_USART1_REMAP)
 
 /**
   * @brief Enable the remapping of USART2 alternate function CTS, RTS, CK, TX and RX.
   * @note  ENABLE: Remap     (CTS/PD3, RTS/PD4, TX/PD5, RX/PD6, CK/PD7)
   * @retval None
   */
-#define __HAL_AFIO_REMAP_USART2_ENABLE()  SET_BIT(AFIO->MAPR, AFIO_MAPR_USART2_REMAP)
+#define __HAL_AFIO_REMAP_USART2_ENABLE()  AFIO_REMAP_ENABLE(AFIO_MAPR_USART2_REMAP)
 
 /**
   * @brief Disable the remapping of USART2 alternate function CTS, RTS, CK, TX and RX.
   * @note  DISABLE: No remap (CTS/PA0, RTS/PA1, TX/PA2, RX/PA3, CK/PA4)
   * @retval None
   */
-#define __HAL_AFIO_REMAP_USART2_DISABLE() CLEAR_BIT(AFIO->MAPR, AFIO_MAPR_USART2_REMAP)
+#define __HAL_AFIO_REMAP_USART2_DISABLE() AFIO_REMAP_DISABLE(AFIO_MAPR_USART2_REMAP)
 
 /**
   * @brief Enable the remapping of USART3 alternate function CTS, RTS, CK, TX and RX.
   * @note  ENABLE: Full remap     (TX/PD8,  RX/PD9,  CK/PD10, CTS/PD11, RTS/PD12)
   * @retval None
   */
-#define __HAL_AFIO_REMAP_USART3_ENABLE()  do{ CLEAR_BIT(AFIO->MAPR, AFIO_MAPR_USART3_REMAP);            \
-                                              SET_BIT(AFIO->MAPR, AFIO_MAPR_USART3_REMAP_FULLREMAP);    \
-                                            }while(0U)
+#define __HAL_AFIO_REMAP_USART3_ENABLE()  AFIO_REMAP_PARTIAL(AFIO_MAPR_USART3_REMAP_FULLREMAP, AFIO_MAPR_USART3_REMAP_FULLREMAP)
+
 /**
   * @brief Enable the remapping of USART3 alternate function CTS, RTS, CK, TX and RX.
   * @note  PARTIAL: Partial remap (TX/PC10, RX/PC11, CK/PC12, CTS/PB13, RTS/PB14)
   * @retval None
   */
-#define __HAL_AFIO_REMAP_USART3_PARTIAL() do{ CLEAR_BIT(AFIO->MAPR, AFIO_MAPR_USART3_REMAP);            \
-                                              SET_BIT(AFIO->MAPR, AFIO_MAPR_USART3_REMAP_PARTIALREMAP); \
-                                            }while(0U)
+#define __HAL_AFIO_REMAP_USART3_PARTIAL()  AFIO_REMAP_PARTIAL(AFIO_MAPR_USART3_REMAP_PARTIALREMAP, AFIO_MAPR_USART3_REMAP_FULLREMAP)
 
 /**
   * @brief Disable the remapping of USART3 alternate function CTS, RTS, CK, TX and RX.
   * @note  DISABLE: No remap      (TX/PB10, RX/PB11, CK/PB12, CTS/PB13, RTS/PB14)
   * @retval None
   */
-#define __HAL_AFIO_REMAP_USART3_DISABLE() do{ CLEAR_BIT(AFIO->MAPR, AFIO_MAPR_USART3_REMAP);       \
-                                              SET_BIT(AFIO->MAPR, AFIO_MAPR_USART3_REMAP_NOREMAP); \
-                                            }while(0U)
+#define __HAL_AFIO_REMAP_USART3_DISABLE()  AFIO_REMAP_PARTIAL(AFIO_MAPR_USART3_REMAP_NOREMAP, AFIO_MAPR_USART3_REMAP_FULLREMAP)
 
 /**
   * @brief Enable the remapping of TIM1 alternate function channels 1 to 4, 1N to 3N, external trigger (ETR) and Break input (BKIN)
   * @note  ENABLE: Full remap     (ETR/PE7,  CH1/PE9, CH2/PE11, CH3/PE13, CH4/PE14, BKIN/PE15, CH1N/PE8,  CH2N/PE10, CH3N/PE12)
   * @retval None
   */
-#define __HAL_AFIO_REMAP_TIM1_ENABLE()  do{ CLEAR_BIT(AFIO->MAPR, AFIO_MAPR_TIM1_REMAP);         \
-                                            SET_BIT(AFIO->MAPR, AFIO_MAPR_TIM1_REMAP_FULLREMAP); \
-                                          }while(0U)
+#define __HAL_AFIO_REMAP_TIM1_ENABLE()  AFIO_REMAP_PARTIAL(AFIO_MAPR_TIM1_REMAP_FULLREMAP, AFIO_MAPR_TIM1_REMAP_FULLREMAP)
 
 /**
   * @brief Enable the remapping of TIM1 alternate function channels 1 to 4, 1N to 3N, external trigger (ETR) and Break input (BKIN)
   * @note  PARTIAL: Partial remap (ETR/PA12, CH1/PA8, CH2/PA9,  CH3/PA10, CH4/PA11, BKIN/PA6,  CH1N/PA7,  CH2N/PB0,  CH3N/PB1)
   * @retval None
   */
-#define __HAL_AFIO_REMAP_TIM1_PARTIAL()  do{ CLEAR_BIT(AFIO->MAPR, AFIO_MAPR_TIM1_REMAP);            \
-                                             SET_BIT(AFIO->MAPR, AFIO_MAPR_TIM1_REMAP_PARTIALREMAP); \
-                                           }while(0U)
+#define __HAL_AFIO_REMAP_TIM1_PARTIAL()  AFIO_REMAP_PARTIAL(AFIO_MAPR_TIM1_REMAP_PARTIALREMAP, AFIO_MAPR_TIM1_REMAP_FULLREMAP)
 
 /**
   * @brief Disable the remapping of TIM1 alternate function channels 1 to 4, 1N to 3N, external trigger (ETR) and Break input (BKIN)
   * @note  DISABLE: No remap      (ETR/PA12, CH1/PA8, CH2/PA9,  CH3/PA10, CH4/PA11, BKIN/PB12, CH1N/PB13, CH2N/PB14, CH3N/PB15)
   * @retval None
   */
-#define __HAL_AFIO_REMAP_TIM1_DISABLE() do{ CLEAR_BIT(AFIO->MAPR, AFIO_MAPR_TIM1_REMAP);       \
-                                            SET_BIT(AFIO->MAPR, AFIO_MAPR_TIM1_REMAP_NOREMAP); \
-                                          }while(0U)
+#define __HAL_AFIO_REMAP_TIM1_DISABLE()  AFIO_REMAP_PARTIAL(AFIO_MAPR_TIM1_REMAP_NOREMAP, AFIO_MAPR_TIM1_REMAP_FULLREMAP)
 
 /**
   * @brief Enable the remapping of TIM2 alternate function channels 1 to 4 and external trigger (ETR)
   * @note  ENABLE: Full remap       (CH1/ETR/PA15, CH2/PB3, CH3/PB10, CH4/PB11)
   * @retval None
   */
-#define __HAL_AFIO_REMAP_TIM2_ENABLE()  do{ CLEAR_BIT(AFIO->MAPR, AFIO_MAPR_TIM2_REMAP);         \
-                                            SET_BIT(AFIO->MAPR, AFIO_MAPR_TIM2_REMAP_FULLREMAP); \
-                                          }while(0U)
+#define __HAL_AFIO_REMAP_TIM2_ENABLE()  AFIO_REMAP_PARTIAL(AFIO_MAPR_TIM2_REMAP_FULLREMAP, AFIO_MAPR_TIM2_REMAP_FULLREMAP)
 
 /**
   * @brief Enable the remapping of TIM2 alternate function channels 1 to 4 and external trigger (ETR)
   * @note  PARTIAL_2: Partial remap (CH1/ETR/PA0,  CH2/PA1, CH3/PB10, CH4/PB11)
   * @retval None
   */
-#define __HAL_AFIO_REMAP_TIM2_PARTIAL_2()  do{ CLEAR_BIT(AFIO->MAPR, AFIO_MAPR_TIM2_REMAP);             \
-                                               SET_BIT(AFIO->MAPR, AFIO_MAPR_TIM2_REMAP_PARTIALREMAP2); \
-                                             }while(0U)
+#define __HAL_AFIO_REMAP_TIM2_PARTIAL_2()  AFIO_REMAP_PARTIAL(AFIO_MAPR_TIM2_REMAP_PARTIALREMAP2, AFIO_MAPR_TIM2_REMAP_FULLREMAP)
 
 /**
   * @brief Enable the remapping of TIM2 alternate function channels 1 to 4 and external trigger (ETR)
   * @note  PARTIAL_1: Partial remap (CH1/ETR/PA15, CH2/PB3, CH3/PA2,  CH4/PA3)
   * @retval None
   */
-#define __HAL_AFIO_REMAP_TIM2_PARTIAL_1()  do{ CLEAR_BIT(AFIO->MAPR, AFIO_MAPR_TIM2_REMAP);             \
-                                               SET_BIT(AFIO->MAPR, AFIO_MAPR_TIM2_REMAP_PARTIALREMAP1); \
-                                             }while(0U)
+#define __HAL_AFIO_REMAP_TIM2_PARTIAL_1()  AFIO_REMAP_PARTIAL(AFIO_MAPR_TIM2_REMAP_PARTIALREMAP1, AFIO_MAPR_TIM2_REMAP_FULLREMAP)
 
 /**
   * @brief Disable the remapping of TIM2 alternate function channels 1 to 4 and external trigger (ETR)
   * @note  DISABLE: No remap        (CH1/ETR/PA0,  CH2/PA1, CH3/PA2,  CH4/PA3)
   * @retval None
   */
-#define __HAL_AFIO_REMAP_TIM2_DISABLE() do{ CLEAR_BIT(AFIO->MAPR, AFIO_MAPR_TIM2_REMAP);         \
-                                            SET_BIT(AFIO->MAPR, AFIO_MAPR_TIM2_REMAP_NOREMAP);   \
-                                          }while(0U)
+#define __HAL_AFIO_REMAP_TIM2_DISABLE()  AFIO_REMAP_PARTIAL(AFIO_MAPR_TIM2_REMAP_NOREMAP, AFIO_MAPR_TIM2_REMAP_FULLREMAP)
 
 /**
   * @brief Enable the remapping of TIM3 alternate function channels 1 to 4
@@ -287,9 +264,7 @@
   * @note  TIM3_ETR on PE0 is not re-mapped.
   * @retval None
   */
-#define __HAL_AFIO_REMAP_TIM3_ENABLE()  do{ CLEAR_BIT(AFIO->MAPR, AFIO_MAPR_TIM3_REMAP);         \
-                                            SET_BIT(AFIO->MAPR, AFIO_MAPR_TIM3_REMAP_FULLREMAP); \
-                                          }while(0U)
+#define __HAL_AFIO_REMAP_TIM3_ENABLE()  AFIO_REMAP_PARTIAL(AFIO_MAPR_TIM3_REMAP_FULLREMAP, AFIO_MAPR_TIM3_REMAP_FULLREMAP)
 
 /**
   * @brief Enable the remapping of TIM3 alternate function channels 1 to 4
@@ -297,9 +272,7 @@
   * @note  TIM3_ETR on PE0 is not re-mapped.
   * @retval None
   */
-#define __HAL_AFIO_REMAP_TIM3_PARTIAL()    do{ CLEAR_BIT(AFIO->MAPR, AFIO_MAPR_TIM3_REMAP);            \
-                                               SET_BIT(AFIO->MAPR, AFIO_MAPR_TIM3_REMAP_PARTIALREMAP); \
-                                             }while(0U)
+#define __HAL_AFIO_REMAP_TIM3_PARTIAL()  AFIO_REMAP_PARTIAL(AFIO_MAPR_TIM3_REMAP_PARTIALREMAP, AFIO_MAPR_TIM3_REMAP_FULLREMAP)
 
 /**
   * @brief Disable the remapping of TIM3 alternate function channels 1 to 4
@@ -307,9 +280,7 @@
   * @note  TIM3_ETR on PE0 is not re-mapped.
   * @retval None
   */
-#define __HAL_AFIO_REMAP_TIM3_DISABLE()   do{ CLEAR_BIT(AFIO->MAPR, AFIO_MAPR_TIM3_REMAP);           \
-                                              SET_BIT(AFIO->MAPR, AFIO_MAPR_TIM3_REMAP_NOREMAP);     \
-                                            }while(0U)
+#define __HAL_AFIO_REMAP_TIM3_DISABLE()  AFIO_REMAP_PARTIAL(AFIO_MAPR_TIM3_REMAP_NOREMAP, AFIO_MAPR_TIM3_REMAP_FULLREMAP)
 
 /**
   * @brief Enable the remapping of TIM4 alternate function channels 1 to 4.
@@ -317,7 +288,7 @@
   * @note  TIM4_ETR on PE0 is not re-mapped.
   * @retval None
   */
-#define __HAL_AFIO_REMAP_TIM4_ENABLE()  SET_BIT(AFIO->MAPR, AFIO_MAPR_TIM4_REMAP)
+#define __HAL_AFIO_REMAP_TIM4_ENABLE()  AFIO_REMAP_ENABLE(AFIO_MAPR_TIM4_REMAP)
 
 /**
   * @brief Disable the remapping of TIM4 alternate function channels 1 to 4.
@@ -325,7 +296,7 @@
   * @note  TIM4_ETR on PE0 is not re-mapped.
   * @retval None
   */
-#define __HAL_AFIO_REMAP_TIM4_DISABLE() CLEAR_BIT(AFIO->MAPR, AFIO_MAPR_TIM4_REMAP)
+#define __HAL_AFIO_REMAP_TIM4_DISABLE() AFIO_REMAP_DISABLE(AFIO_MAPR_TIM4_REMAP)
 
 #if defined(AFIO_MAPR_CAN_REMAP_REMAP1)
 
@@ -334,48 +305,43 @@
   * @note  CASE 1: CAN_RX mapped to PA11, CAN_TX mapped to PA12
   * @retval None
   */
-#define __HAL_AFIO_REMAP_CAN1_1()   do{ CLEAR_BIT(AFIO->MAPR, AFIO_MAPR_CAN_REMAP);         \
-                                        SET_BIT(AFIO->MAPR, AFIO_MAPR_CAN_REMAP_REMAP1);    \
-                                      }while(0U)
+#define __HAL_AFIO_REMAP_CAN1_1()  AFIO_REMAP_PARTIAL(AFIO_MAPR_CAN_REMAP_REMAP1, AFIO_MAPR_CAN_REMAP)
 
 /**
   * @brief Enable or disable the remapping of CAN alternate function CAN_RX and CAN_TX in devices with a single CAN interface.
   * @note  CASE 2: CAN_RX mapped to PB8,  CAN_TX mapped to PB9 (not available on 36-pin package)
   * @retval None
   */
-#define __HAL_AFIO_REMAP_CAN1_2()   do{ CLEAR_BIT(AFIO->MAPR, AFIO_MAPR_CAN_REMAP);         \
-                                        SET_BIT(AFIO->MAPR, AFIO_MAPR_CAN_REMAP_REMAP2);    \
-                                      }while(0U)
+#define __HAL_AFIO_REMAP_CAN1_2()  AFIO_REMAP_PARTIAL(AFIO_MAPR_CAN_REMAP_REMAP2, AFIO_MAPR_CAN_REMAP)
 
 /**
   * @brief Enable or disable the remapping of CAN alternate function CAN_RX and CAN_TX in devices with a single CAN interface.
   * @note  CASE 3: CAN_RX mapped to PD0,  CAN_TX mapped to PD1
   * @retval None
   */
-#define __HAL_AFIO_REMAP_CAN1_3()  do{ CLEAR_BIT(AFIO->MAPR, AFIO_MAPR_CAN_REMAP);                 \
-                                       SET_BIT(AFIO->MAPR, AFIO_MAPR_CAN_REMAP_REMAP3);       \
-                                     }while(0U)
+#define __HAL_AFIO_REMAP_CAN1_3()  AFIO_REMAP_PARTIAL(AFIO_MAPR_CAN_REMAP_REMAP3, AFIO_MAPR_CAN_REMAP)
+
 #endif
 
 /**
-  * @brief Enable the remapping of PD0 and PD1. When the HSE oscillator is not used 
-  *        (application running on internal 8 MHz RC) PD0 and PD1 can be mapped on OSC_IN and 
-  *        OSC_OUT. This is available only on 36, 48 and 64 pins packages (PD0 and PD1 are available 
+  * @brief Enable the remapping of PD0 and PD1. When the HSE oscillator is not used
+  *        (application running on internal 8 MHz RC) PD0 and PD1 can be mapped on OSC_IN and
+  *        OSC_OUT. This is available only on 36, 48 and 64 pins packages (PD0 and PD1 are available
   *        on 100-pin and 144-pin packages, no need for remapping).
   * @note  ENABLE: PD0 remapped on OSC_IN, PD1 remapped on OSC_OUT.
   * @retval None
   */
-#define __HAL_AFIO_REMAP_PD01_ENABLE()  SET_BIT(AFIO->MAPR, AFIO_MAPR_PD01_REMAP)
+#define __HAL_AFIO_REMAP_PD01_ENABLE()  AFIO_REMAP_ENABLE(AFIO_MAPR_PD01_REMAP)
 
 /**
-  * @brief Disable the remapping of PD0 and PD1. When the HSE oscillator is not used 
-  *        (application running on internal 8 MHz RC) PD0 and PD1 can be mapped on OSC_IN and 
-  *        OSC_OUT. This is available only on 36, 48 and 64 pins packages (PD0 and PD1 are available 
+  * @brief Disable the remapping of PD0 and PD1. When the HSE oscillator is not used
+  *        (application running on internal 8 MHz RC) PD0 and PD1 can be mapped on OSC_IN and
+  *        OSC_OUT. This is available only on 36, 48 and 64 pins packages (PD0 and PD1 are available
   *        on 100-pin and 144-pin packages, no need for remapping).
   * @note  DISABLE: No remapping of PD0 and PD1
   * @retval None
   */
-#define __HAL_AFIO_REMAP_PD01_DISABLE() CLEAR_BIT(AFIO->MAPR, AFIO_MAPR_PD01_REMAP)
+#define __HAL_AFIO_REMAP_PD01_DISABLE() AFIO_REMAP_DISABLE(AFIO_MAPR_PD01_REMAP)
 
 #if defined(AFIO_MAPR_TIM5CH4_IREMAP)
 /**
@@ -384,7 +350,7 @@
   * @note  This function is available only in high density value line devices.
   * @retval None
   */
-#define __HAL_AFIO_REMAP_TIM5CH4_ENABLE()  SET_BIT(AFIO->MAPR, AFIO_MAPR_TIM5CH4_IREMAP)
+#define __HAL_AFIO_REMAP_TIM5CH4_ENABLE()  AFIO_REMAP_ENABLE(AFIO_MAPR_TIM5CH4_IREMAP)
 
 /**
   * @brief Disable the remapping of TIM5CH4.
@@ -392,7 +358,7 @@
   * @note  This function is available only in high density value line devices.
   * @retval None
   */
-#define __HAL_AFIO_REMAP_TIM5CH4_DISABLE() CLEAR_BIT(AFIO->MAPR, AFIO_MAPR_TIM5CH4_IREMAP)
+#define __HAL_AFIO_REMAP_TIM5CH4_DISABLE() AFIO_REMAP_DISABLE(AFIO_MAPR_TIM5CH4_IREMAP)
 #endif
 
 #if defined(AFIO_MAPR_ETH_REMAP)
@@ -402,7 +368,7 @@
   * @note  This bit is available only in connectivity line devices and is reserved otherwise.
   * @retval None
   */
-#define __HAL_AFIO_REMAP_ETH_ENABLE()  SET_BIT(AFIO->MAPR, AFIO_MAPR_ETH_REMAP)
+#define __HAL_AFIO_REMAP_ETH_ENABLE()  AFIO_REMAP_ENABLE(AFIO_MAPR_ETH_REMAP)
 
 /**
   * @brief Disable the remapping of Ethernet MAC connections with the PHY.
@@ -410,7 +376,7 @@
   * @note  This bit is available only in connectivity line devices and is reserved otherwise.
   * @retval None
   */
-#define __HAL_AFIO_REMAP_ETH_DISABLE() CLEAR_BIT(AFIO->MAPR, AFIO_MAPR_ETH_REMAP)
+#define __HAL_AFIO_REMAP_ETH_DISABLE() AFIO_REMAP_DISABLE(AFIO_MAPR_ETH_REMAP)
 #endif
 
 #if defined(AFIO_MAPR_CAN2_REMAP)
@@ -421,7 +387,7 @@
   * @note  This bit is available only in connectivity line devices and is reserved otherwise.
   * @retval None
   */
-#define __HAL_AFIO_REMAP_CAN2_ENABLE()  SET_BIT(AFIO->MAPR, AFIO_MAPR_CAN2_REMAP)
+#define __HAL_AFIO_REMAP_CAN2_ENABLE()  AFIO_REMAP_ENABLE(AFIO_MAPR_CAN2_REMAP)
 
 /**
   * @brief Disable the remapping of CAN2 alternate function CAN2_RX and CAN2_TX.
@@ -429,7 +395,7 @@
   * @note  This bit is available only in connectivity line devices and is reserved otherwise.
   * @retval None
   */
-#define __HAL_AFIO_REMAP_CAN2_DISABLE() CLEAR_BIT(AFIO->MAPR, AFIO_MAPR_CAN2_REMAP)
+#define __HAL_AFIO_REMAP_CAN2_DISABLE() AFIO_REMAP_DISABLE(AFIO_MAPR_CAN2_REMAP)
 #endif
 
 #if defined(AFIO_MAPR_MII_RMII_SEL)
@@ -439,7 +405,7 @@
   * @note  This bit is available only in connectivity line devices and is reserved otherwise.
   * @retval None
   */
-#define __HAL_AFIO_ETH_RMII() SET_BIT(AFIO->MAPR, AFIO_MAPR_MII_RMII_SEL)
+#define __HAL_AFIO_ETH_RMII() AFIO_REMAP_ENABLE(AFIO_MAPR_MII_RMII_SEL)
 
 /**
   * @brief Configures the Ethernet MAC internally for use with an external MII or RMII PHY.
@@ -447,7 +413,7 @@
   * @note  This bit is available only in connectivity line devices and is reserved otherwise.
   * @retval None
   */
-#define __HAL_AFIO_ETH_MII()  CLEAR_BIT(AFIO->MAPR, AFIO_MAPR_MII_RMII_SEL)
+#define __HAL_AFIO_ETH_MII()  AFIO_REMAP_DISABLE(AFIO_MAPR_MII_RMII_SEL)
 #endif
 
 /**
@@ -455,28 +421,28 @@
   * @note  ENABLE: ADC1 External Event injected conversion is connected to TIM8 Channel4.
   * @retval None
   */
-#define __HAL_AFIO_REMAP_ADC1_ETRGINJ_ENABLE()  SET_BIT(AFIO->MAPR, AFIO_MAPR_ADC1_ETRGINJ_REMAP)
+#define __HAL_AFIO_REMAP_ADC1_ETRGINJ_ENABLE()  AFIO_REMAP_ENABLE(AFIO_MAPR_ADC1_ETRGINJ_REMAP)
 
 /**
   * @brief Disable the remapping of ADC1_ETRGINJ (ADC 1 External trigger injected conversion).
   * @note  DISABLE: ADC1 External trigger injected conversion is connected to EXTI15
   * @retval None
   */
-#define __HAL_AFIO_REMAP_ADC1_ETRGINJ_DISABLE() CLEAR_BIT(AFIO->MAPR, AFIO_MAPR_ADC1_ETRGINJ_REMAP)
+#define __HAL_AFIO_REMAP_ADC1_ETRGINJ_DISABLE() AFIO_REMAP_DISABLE(AFIO_MAPR_ADC1_ETRGINJ_REMAP)
 
 /**
   * @brief Enable the remapping of ADC1_ETRGREG (ADC 1 External trigger regular conversion).
   * @note  ENABLE: ADC1 External Event regular conversion is connected to TIM8 TRG0.
   * @retval None
   */
-#define __HAL_AFIO_REMAP_ADC1_ETRGREG_ENABLE()  SET_BIT(AFIO->MAPR, AFIO_MAPR_ADC1_ETRGREG_REMAP)
+#define __HAL_AFIO_REMAP_ADC1_ETRGREG_ENABLE()  AFIO_REMAP_ENABLE(AFIO_MAPR_ADC1_ETRGREG_REMAP)
 
 /**
   * @brief Disable the remapping of ADC1_ETRGREG (ADC 1 External trigger regular conversion).
   * @note  DISABLE: ADC1 External trigger regular conversion is connected to EXTI11
   * @retval None
   */
-#define __HAL_AFIO_REMAP_ADC1_ETRGREG_DISABLE() CLEAR_BIT(AFIO->MAPR, AFIO_MAPR_ADC1_ETRGREG_REMAP)
+#define __HAL_AFIO_REMAP_ADC1_ETRGREG_DISABLE() AFIO_REMAP_DISABLE(AFIO_MAPR_ADC1_ETRGREG_REMAP)
 
 #if defined(AFIO_MAPR_ADC2_ETRGINJ_REMAP)
 
@@ -485,14 +451,14 @@
   * @note  ENABLE: ADC2 External Event injected conversion is connected to TIM8 Channel4.
   * @retval None
   */
-#define __HAL_AFIO_REMAP_ADC2_ETRGINJ_ENABLE()  SET_BIT(AFIO->MAPR, AFIO_MAPR_ADC2_ETRGINJ_REMAP)
+#define __HAL_AFIO_REMAP_ADC2_ETRGINJ_ENABLE()  AFIO_REMAP_ENABLE(AFIO_MAPR_ADC2_ETRGINJ_REMAP)
 
 /**
   * @brief Disable the remapping of ADC2_ETRGREG (ADC 2 External trigger injected conversion).
   * @note  DISABLE: ADC2 External trigger injected conversion is connected to EXTI15
   * @retval None
   */
-#define __HAL_AFIO_REMAP_ADC2_ETRGINJ_DISABLE() CLEAR_BIT(AFIO->MAPR, AFIO_MAPR_ADC2_ETRGINJ_REMAP)
+#define __HAL_AFIO_REMAP_ADC2_ETRGINJ_DISABLE() AFIO_REMAP_DISABLE(AFIO_MAPR_ADC2_ETRGINJ_REMAP)
 #endif
 
 #if defined (AFIO_MAPR_ADC2_ETRGREG_REMAP)
@@ -502,14 +468,14 @@
   * @note  ENABLE: ADC2 External Event regular conversion is connected to TIM8 TRG0.
   * @retval None
   */
-#define __HAL_AFIO_REMAP_ADC2_ETRGREG_ENABLE()  SET_BIT(AFIO->MAPR, AFIO_MAPR_ADC2_ETRGREG_REMAP)
+#define __HAL_AFIO_REMAP_ADC2_ETRGREG_ENABLE()  AFIO_REMAP_ENABLE(AFIO_MAPR_ADC2_ETRGREG_REMAP)
 
 /**
   * @brief Disable the remapping of ADC2_ETRGREG (ADC 2 External trigger regular conversion).
   * @note  DISABLE: ADC2 External trigger regular conversion is connected to EXTI11
   * @retval None
   */
-#define __HAL_AFIO_REMAP_ADC2_ETRGREG_DISABLE() CLEAR_BIT(AFIO->MAPR, AFIO_MAPR_ADC2_ETRGREG_REMAP)
+#define __HAL_AFIO_REMAP_ADC2_ETRGREG_DISABLE() AFIO_REMAP_DISABLE(AFIO_MAPR_ADC2_ETRGREG_REMAP)
 #endif
 
 /**
@@ -517,36 +483,29 @@
   * @note  ENABLE: Full SWJ (JTAG-DP + SW-DP): Reset State
   * @retval None
   */
-#define __HAL_AFIO_REMAP_SWJ_ENABLE()  do{ CLEAR_BIT(AFIO->MAPR, AFIO_MAPR_SWJ_CFG);         \
-                                           SET_BIT(AFIO->MAPR, AFIO_MAPR_SWJ_CFG_RESET);     \
-                                         }while(0U)
+#define __HAL_AFIO_REMAP_SWJ_ENABLE()  AFIO_DBGAFR_CONFIG(AFIO_MAPR_SWJ_CFG_RESET)
 
 /**
   * @brief Enable the Serial wire JTAG configuration
   * @note  NONJTRST: Full SWJ (JTAG-DP + SW-DP) but without NJTRST
   * @retval None
   */
-#define __HAL_AFIO_REMAP_SWJ_NONJTRST()   do{ CLEAR_BIT(AFIO->MAPR, AFIO_MAPR_SWJ_CFG);         \
-                                              SET_BIT(AFIO->MAPR, AFIO_MAPR_SWJ_CFG_NOJNTRST);  \
-                                            }while(0U)
+#define __HAL_AFIO_REMAP_SWJ_NONJTRST()  AFIO_DBGAFR_CONFIG(AFIO_MAPR_SWJ_CFG_NOJNTRST)
 
 /**
   * @brief Enable the Serial wire JTAG configuration
   * @note  NOJTAG: JTAG-DP Disabled and SW-DP Enabled
   * @retval None
   */
-#define __HAL_AFIO_REMAP_SWJ_NOJTAG()   do{ CLEAR_BIT(AFIO->MAPR, AFIO_MAPR_SWJ_CFG);           \
-                                            SET_BIT(AFIO->MAPR, AFIO_MAPR_SWJ_CFG_JTAGDISABLE); \
-                                          }while(0U)
+
+#define __HAL_AFIO_REMAP_SWJ_NOJTAG()  AFIO_DBGAFR_CONFIG(AFIO_MAPR_SWJ_CFG_JTAGDISABLE)
 
 /**
   * @brief Disable the Serial wire JTAG configuration
   * @note  DISABLE: JTAG-DP Disabled and SW-DP Disabled
   * @retval None
   */
-#define __HAL_AFIO_REMAP_SWJ_DISABLE()  do{ CLEAR_BIT(AFIO->MAPR, AFIO_MAPR_SWJ_CFG);         \
-                                            SET_BIT(AFIO->MAPR, AFIO_MAPR_SWJ_CFG_DISABLE);   \
-                                          }while(0U)
+#define __HAL_AFIO_REMAP_SWJ_DISABLE()  AFIO_DBGAFR_CONFIG(AFIO_MAPR_SWJ_CFG_DISABLE)
 
 #if defined(AFIO_MAPR_SPI3_REMAP)
 
@@ -556,7 +515,7 @@
   * @note  This bit is available only in connectivity line devices and is reserved otherwise.
   * @retval None
   */
-#define __HAL_AFIO_REMAP_SPI3_ENABLE()  SET_BIT(AFIO->MAPR, AFIO_MAPR_SPI3_REMAP)
+#define __HAL_AFIO_REMAP_SPI3_ENABLE()  AFIO_REMAP_ENABLE(AFIO_MAPR_SPI3_REMAP)
 
 /**
   * @brief Disable the remapping of SPI3 alternate functions SPI3_NSS/I2S3_WS, SPI3_SCK/I2S3_CK, SPI3_MISO, SPI3_MOSI/I2S3_SD.
@@ -564,7 +523,7 @@
   * @note  This bit is available only in connectivity line devices and is reserved otherwise.
   * @retval None
   */
-#define __HAL_AFIO_REMAP_SPI3_DISABLE() CLEAR_BIT(AFIO->MAPR, AFIO_MAPR_SPI3_REMAP)
+#define __HAL_AFIO_REMAP_SPI3_DISABLE() AFIO_REMAP_DISABLE(AFIO_MAPR_SPI3_REMAP)
 #endif
 
 #if defined(AFIO_MAPR_TIM2ITR1_IREMAP)
@@ -575,7 +534,7 @@
   * @note  This bit is available only in connectivity line devices and is reserved otherwise.
   * @retval None
   */
-#define __HAL_AFIO_TIM2ITR1_TO_USB() SET_BIT(AFIO->MAPR, AFIO_MAPR_TIM2ITR1_IREMAP)
+#define __HAL_AFIO_TIM2ITR1_TO_USB() AFIO_REMAP_ENABLE(AFIO_MAPR_TIM2ITR1_IREMAP)
 
 /**
   * @brief Control of TIM2_ITR1 internal mapping.
@@ -583,7 +542,7 @@
   * @note  This bit is available only in connectivity line devices and is reserved otherwise.
   * @retval None
   */
-#define __HAL_AFIO_TIM2ITR1_TO_ETH() CLEAR_BIT(AFIO->MAPR, AFIO_MAPR_TIM2ITR1_IREMAP)
+#define __HAL_AFIO_TIM2ITR1_TO_ETH() AFIO_REMAP_DISABLE(AFIO_MAPR_TIM2ITR1_IREMAP)
 #endif
 
 #if defined(AFIO_MAPR_PTP_PPS_REMAP)
@@ -594,7 +553,7 @@
   * @note  This bit is available only in connectivity line devices and is reserved otherwise.
   * @retval None
   */
-#define __HAL_AFIO_ETH_PTP_PPS_ENABLE()  SET_BIT(AFIO->MAPR, AFIO_MAPR_PTP_PPS_REMAP)
+#define __HAL_AFIO_ETH_PTP_PPS_ENABLE()  AFIO_REMAP_ENABLE(AFIO_MAPR_PTP_PPS_REMAP)
 
 /**
   * @brief Disable the remapping of ADC2_ETRGREG (ADC 2 External trigger regular conversion).
@@ -602,7 +561,7 @@
   * @note  This bit is available only in connectivity line devices and is reserved otherwise.
   * @retval None
   */
-#define __HAL_AFIO_ETH_PTP_PPS_DISABLE() CLEAR_BIT(AFIO->MAPR, AFIO_MAPR_PTP_PPS_REMAP)
+#define __HAL_AFIO_ETH_PTP_PPS_DISABLE() AFIO_REMAP_DISABLE(AFIO_MAPR_PTP_PPS_REMAP)
 #endif
 
 #if defined(AFIO_MAPR2_TIM9_REMAP)
@@ -856,12 +815,12 @@
 
 /**
   * @}
-  */ 
-  
+  */
+
 /**
   * @}
   */
-  
+
 /** @defgroup GPIOEx_Private_Macros GPIOEx Private Macros
   * @{
   */
@@ -883,6 +842,31 @@
                                    ((__GPIOx__) == (GPIOF))? 5U :6U)
 #endif
 
+#define AFIO_REMAP_ENABLE(REMAP_PIN)       do{ uint32_t tmpreg = AFIO->MAPR; \
+                                               tmpreg |= AFIO_MAPR_SWJ_CFG;  \
+                                               tmpreg |= REMAP_PIN;          \
+                                               AFIO->MAPR = tmpreg;          \
+                                               }while(0U)
+
+#define AFIO_REMAP_DISABLE(REMAP_PIN)      do{ uint32_t tmpreg = AFIO->MAPR;  \
+                                               tmpreg |= AFIO_MAPR_SWJ_CFG;   \
+                                               tmpreg &= ~REMAP_PIN;          \
+                                               AFIO->MAPR = tmpreg;           \
+                                               }while(0U)
+
+#define AFIO_REMAP_PARTIAL(REMAP_PIN, REMAP_PIN_MASK) do{ uint32_t tmpreg = AFIO->MAPR; \
+                                                          tmpreg &= ~REMAP_PIN_MASK;    \
+                                                          tmpreg |= AFIO_MAPR_SWJ_CFG;  \
+                                                          tmpreg |= REMAP_PIN;          \
+                                                          AFIO->MAPR = tmpreg;          \
+                                                          }while(0U)
+
+#define AFIO_DBGAFR_CONFIG(DBGAFR_SWJCFG)  do{ uint32_t tmpreg = AFIO->MAPR;     \
+                                               tmpreg &= ~AFIO_MAPR_SWJ_CFG_Msk; \
+                                               tmpreg |= DBGAFR_SWJCFG;          \
+                                               AFIO->MAPR = tmpreg;              \
+                                               }while(0U)
+
 /**
   * @}
   */
@@ -903,20 +887,20 @@ void HAL_GPIOEx_DisableEventout(void);
 
 /**
   * @}
-  */ 
+  */
 
 /**
   * @}
-  */ 
+  */
 
 /**
   * @}
-  */ 
+  */
 
 /**
   * @}
-  */ 
-  
+  */
+
 #ifdef __cplusplus
 }
 #endif

workspace/TS100/HAL_Driver/Inc/stm32f1xx_hal_hcd.h

@@ -2,8 +2,6 @@
   ******************************************************************************
   * @file    stm32f1xx_hal_hcd.h
   * @author  MCD Application Team
-  * @version V1.1.1
-  * @date    12-May-2017
   * @brief   Header file of HCD HAL module.
   ******************************************************************************
   * @attention

workspace/TS100/HAL_Driver/Inc/stm32f1xx_hal_i2c.h

@@ -2,8 +2,6 @@
   ******************************************************************************
   * @file    stm32f1xx_hal_i2c.h
   * @author  MCD Application Team
-  * @version V1.1.1
-  * @date    12-May-2017
   * @brief   Header file of I2C HAL module.
   ******************************************************************************
   * @attention
@@ -563,7 +561,9 @@ uint32_t HAL_I2C_GetError(I2C_HandleTypeDef *hi2c);
 /** @defgroup I2C_Private_Constants I2C Private Constants
   * @{
   */
-#define I2C_FLAG_MASK  0x0000FFFFU
+#define I2C_FLAG_MASK                    0x0000FFFFU
+#define I2C_MIN_PCLK_FREQ_STANDARD       2000000U     /*!< 2 MHz                     */
+#define I2C_MIN_PCLK_FREQ_FAST           4000000U     /*!< 4 MHz                     */
 /**
   * @}
   */
@@ -572,11 +572,13 @@ uint32_t HAL_I2C_GetError(I2C_HandleTypeDef *hi2c);
 /** @defgroup I2C_Private_Macros I2C Private Macros
   * @{
   */
-    
+
+#define I2C_MIN_PCLK_FREQ(__PCLK__, __SPEED__)             (((__SPEED__) <= 100000U) ? ((__PCLK__) < I2C_MIN_PCLK_FREQ_STANDARD) : ((__PCLK__) < I2C_MIN_PCLK_FREQ_FAST))
+#define I2C_CCR_CALCULATION(__PCLK__, __SPEED__, __COEFF__)     (((((__PCLK__) - 1U)/((__SPEED__) * (__COEFF__))) + 1U) & I2C_CCR_CCR)
 #define I2C_FREQRANGE(__PCLK__)                            ((__PCLK__)/1000000U)
 #define I2C_RISE_TIME(__FREQRANGE__, __SPEED__)            (((__SPEED__) <= 100000U) ? ((__FREQRANGE__) + 1U) : ((((__FREQRANGE__) * 300U) / 1000U) + 1U))
-#define I2C_SPEED_STANDARD(__PCLK__, __SPEED__)            (((((__PCLK__)/((__SPEED__) << 1U)) & I2C_CCR_CCR) < 4U)? 4U:((__PCLK__) / ((__SPEED__) << 1U)))
-#define I2C_SPEED_FAST(__PCLK__, __SPEED__, __DUTYCYCLE__) (((__DUTYCYCLE__) == I2C_DUTYCYCLE_2)? ((__PCLK__) / ((__SPEED__) * 3U)) : (((__PCLK__) / ((__SPEED__) * 25U)) | I2C_DUTYCYCLE_16_9))
+#define I2C_SPEED_STANDARD(__PCLK__, __SPEED__)            ((I2C_CCR_CALCULATION((__PCLK__), (__SPEED__), 2U) < 4U)? 4U:I2C_CCR_CALCULATION((__PCLK__), (__SPEED__), 2U))
+#define I2C_SPEED_FAST(__PCLK__, __SPEED__, __DUTYCYCLE__) (((__DUTYCYCLE__) == I2C_DUTYCYCLE_2)? I2C_CCR_CALCULATION((__PCLK__), (__SPEED__), 3U) : (I2C_CCR_CALCULATION((__PCLK__), (__SPEED__), 25U) | I2C_DUTYCYCLE_16_9))
 #define I2C_SPEED(__PCLK__, __SPEED__, __DUTYCYCLE__)      (((__SPEED__) <= 100000U)? (I2C_SPEED_STANDARD((__PCLK__), (__SPEED__))) : \
                                                                   ((I2C_SPEED_FAST((__PCLK__), (__SPEED__), (__DUTYCYCLE__)) & I2C_CCR_CCR) == 0U)? 1U : \
                                                                   ((I2C_SPEED_FAST((__PCLK__), (__SPEED__), (__DUTYCYCLE__))) | I2C_CCR_FS))

workspace/TS100/HAL_Driver/Inc/stm32f1xx_hal_i2s.h

@@ -2,8 +2,6 @@
   ******************************************************************************
   * @file    stm32f1xx_hal_i2s.h
   * @author  MCD Application Team
-  * @version V1.1.1
-  * @date    12-May-2017
   * @brief   Header file of I2S HAL module.
   ******************************************************************************
   * @attention

workspace/TS100/HAL_Driver/Inc/stm32f1xx_hal_irda.h

@@ -2,8 +2,6 @@
   ******************************************************************************
   * @file    stm32f1xx_hal_irda.h
   * @author  MCD Application Team
-  * @version V1.1.1
-  * @date    12-May-2017
   * @brief   Header file of IRDA HAL module.
   ******************************************************************************
   * @attention

workspace/TS100/HAL_Driver/Inc/stm32f1xx_hal_iwdg.h

@@ -2,8 +2,6 @@
   ******************************************************************************
   * @file    stm32f1xx_hal_iwdg.h
   * @author  MCD Application Team
-  * @version V1.1.1
-  * @date    12-May-2017
   * @brief   Header file of IWDG HAL module.
   ******************************************************************************
   * @attention
@@ -40,7 +38,7 @@
 #define __STM32F1xx_HAL_IWDG_H
 
 #ifdef __cplusplus
- extern "C" {
+extern "C" {
 #endif
 
 /* Includes ------------------------------------------------------------------*/
@@ -59,7 +57,7 @@
   * @{
   */
 
-/** 
+/**
   * @brief  IWDG Init structure definition
   */
 typedef struct
@@ -81,7 +79,7 @@ typedef struct
 
   IWDG_InitTypeDef             Init;       /*!< IWDG required parameters */
 
-}IWDG_HandleTypeDef;
+} IWDG_HandleTypeDef;
 
 /**
   * @}

workspace/TS100/HAL_Driver/Inc/stm32f1xx_hal_mmc.h

@@ -2,8 +2,6 @@
   ******************************************************************************
   * @file    stm32f1xx_hal_mmc.h
   * @author  MCD Application Team
-  * @version V1.1.1
-  * @date    12-May-2017
   * @brief   Header file of MMC HAL module.
   ******************************************************************************
   * @attention

workspace/TS100/HAL_Driver/Inc/stm32f1xx_hal_nand.h

@@ -2,8 +2,6 @@
   ******************************************************************************
   * @file    stm32f1xx_hal_nand.h
   * @author  MCD Application Team
-  * @version V1.1.1
-  * @date    12-May-2017
   * @brief   Header file of NAND HAL module.
   ******************************************************************************
   * @attention

workspace/TS100/HAL_Driver/Inc/stm32f1xx_hal_nor.h

@@ -2,8 +2,6 @@
   ******************************************************************************
   * @file    stm32f1xx_hal_nor.h
   * @author  MCD Application Team
-  * @version V1.1.1
-  * @date    12-May-2017
   * @brief   Header file of NOR HAL module.
   ******************************************************************************
   * @attention

workspace/TS100/HAL_Driver/Inc/stm32f1xx_hal_pccard.h

@@ -2,8 +2,6 @@
   ******************************************************************************
   * @file    stm32f1xx_hal_pccard.h
   * @author  MCD Application Team
-  * @version V1.1.1
-  * @date    12-May-2017
   * @brief   Header file of PCCARD HAL module.
   ******************************************************************************
   * @attention

workspace/TS100/HAL_Driver/Inc/stm32f1xx_hal_pcd.h

@@ -2,8 +2,6 @@
   ******************************************************************************
   * @file    stm32f1xx_hal_pcd.h
   * @author  MCD Application Team
-  * @version V1.1.1
-  * @date    12-May-2017
   * @brief   Header file of PCD HAL module.
   ******************************************************************************
   * @attention

workspace/TS100/HAL_Driver/Inc/stm32f1xx_hal_pcd_ex.h

@@ -2,8 +2,6 @@
   ******************************************************************************
   * @file    stm32f1xx_hal_pcd_ex.h
   * @author  MCD Application Team
-  * @version V1.1.1
-  * @date    12-May-2017
   * @brief   Header file of Extended PCD HAL module.
   ******************************************************************************
   * @attention

workspace/TS100/HAL_Driver/Inc/stm32f1xx_hal_pwr.h

@@ -2,8 +2,6 @@
   ******************************************************************************
   * @file    stm32f1xx_hal_pwr.h
   * @author  MCD Application Team
-  * @version V1.1.1
-  * @date    12-May-2017
   * @brief   Header file of PWR HAL module.
   ******************************************************************************
   * @attention

workspace/TS100/HAL_Driver/Inc/stm32f1xx_hal_rcc.h

@@ -2,8 +2,6 @@
   ******************************************************************************
   * @file    stm32f1xx_hal_rcc.h
   * @author  MCD Application Team
-  * @version V1.1.1
-  * @date    12-May-2017
   * @brief   Header file of RCC HAL module.
   ******************************************************************************
   * @attention
@@ -1170,7 +1168,7 @@ typedef struct
   */
 
 /* Initialization and de-initialization functions  ******************************/
-void              HAL_RCC_DeInit(void);
+HAL_StatusTypeDef HAL_RCC_DeInit(void);
 HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef  *RCC_OscInitStruct);
 HAL_StatusTypeDef HAL_RCC_ClockConfig(RCC_ClkInitTypeDef  *RCC_ClkInitStruct, uint32_t FLatency);
 

workspace/TS100/HAL_Driver/Inc/stm32f1xx_hal_rcc_ex.h

@@ -2,8 +2,6 @@
   ******************************************************************************
   * @file    stm32f1xx_hal_rcc_ex.h
   * @author  MCD Application Team
-  * @version V1.1.1
-  * @date    12-May-2017
   * @brief   Header file of RCC HAL Extension module.
   ******************************************************************************
   * @attention

workspace/TS100/HAL_Driver/Inc/stm32f1xx_hal_rtc.h

@@ -2,8 +2,6 @@
   ******************************************************************************
   * @file    stm32f1xx_hal_rtc.h
   * @author  MCD Application Team
-  * @version V1.1.1
-  * @date    12-May-2017
   * @brief   Header file of RTC HAL module.
   ******************************************************************************
   * @attention

workspace/TS100/HAL_Driver/Inc/stm32f1xx_hal_rtc_ex.h

@@ -2,8 +2,6 @@
   ******************************************************************************
   * @file    stm32f1xx_hal_rtc_ex.h
   * @author  MCD Application Team
-  * @version V1.1.1
-  * @date    12-May-2017
   * @brief   Header file of RTC HAL Extension module.
   ******************************************************************************
   * @attention

workspace/TS100/HAL_Driver/Inc/stm32f1xx_hal_sd.h

@@ -2,8 +2,6 @@
   ******************************************************************************
   * @file    stm32f1xx_hal_sd.h
   * @author  MCD Application Team
-  * @version V1.1.1
-  * @date    12-May-2017
   * @brief   Header file of SD HAL module.
   ******************************************************************************
   * @attention

workspace/TS100/HAL_Driver/Inc/stm32f1xx_hal_smartcard.h

@@ -2,8 +2,6 @@
   ******************************************************************************
   * @file    stm32f1xx_hal_smartcard.h
   * @author  MCD Application Team
-  * @version V1.1.1
-  * @date    12-May-2017
   * @brief   Header file of SMARTCARD HAL module.
   ******************************************************************************
   * @attention
@@ -40,7 +38,7 @@
 #define __STM32F1xx_HAL_SMARTCARD_H
 
 #ifdef __cplusplus
- extern "C" {
+extern "C" {
 #endif
 
 /* Includes ------------------------------------------------------------------*/
@@ -54,7 +52,7 @@
   * @{
   */
 
-/* Exported types ------------------------------------------------------------*/ 
+/* Exported types ------------------------------------------------------------*/
 /** @defgroup SMARTCARD_Exported_Types SMARTCARD Exported Types
   * @{
   */
@@ -95,7 +93,7 @@ typedef struct
                                            data bit (MSB) has to be output on the SCLK pin in synchronous mode.
                                            This parameter can be a value of @ref SMARTCARD_Last_Bit */
 
-  uint32_t Prescaler;                 /*!< Specifies the SmartCard Prescaler value used for dividing the system clock 
+  uint32_t Prescaler;                 /*!< Specifies the SmartCard Prescaler value used for dividing the system clock
                                            to provide the smartcard clock. The value given in the register (5 significant bits)
                                            is multiplied by 2 to give the division factor of the source clock frequency.
                                            This parameter can be a value of @ref SMARTCARD_Prescaler */
@@ -104,15 +102,15 @@ typedef struct
 
   uint32_t NACKState;                 /*!< Specifies the SmartCard NACK Transmission state
                                            This parameter can be a value of @ref SMARTCARD_NACK_State */
-}SMARTCARD_InitTypeDef;
+} SMARTCARD_InitTypeDef;
 
-/** 
+/**
   * @brief HAL SMARTCARD State structures definition
   * @note  HAL SMARTCARD State value is a combination of 2 different substates: gState and RxState.
-  *        - gState contains SMARTCARD state information related to global Handle management 
+  *        - gState contains SMARTCARD state information related to global Handle management
   *          and also information related to Tx operations.
   *          gState value coding follow below described bitmap :
-  *          b7-b6  Error information 
+  *          b7-b6  Error information
   *             00 : No Error
   *             01 : (Not Used)
   *             10 : Timeout
@@ -157,16 +155,16 @@ typedef enum
                                                         Value is allowed for gState only */
   HAL_SMARTCARD_STATE_BUSY_RX           = 0x22U,    /*!< Data Reception process is ongoing
                                                         Value is allowed for RxState only */
-  HAL_SMARTCARD_STATE_BUSY_TX_RX        = 0x23U,    /*!< Data Transmission and Reception process is ongoing 
+  HAL_SMARTCARD_STATE_BUSY_TX_RX        = 0x23U,    /*!< Data Transmission and Reception process is ongoing
                                                         Not to be used for neither gState nor RxState.
                                                         Value is result of combination (Or) between gState and RxState values */
   HAL_SMARTCARD_STATE_TIMEOUT           = 0xA0U,    /*!< Timeout state
                                                         Value is allowed for gState only */
   HAL_SMARTCARD_STATE_ERROR             = 0xE0U     /*!< Error
                                                         Value is allowed for gState only */
-}HAL_SMARTCARD_StateTypeDef;
+} HAL_SMARTCARD_StateTypeDef;
 
-/** 
+/**
   * @brief  SMARTCARD handle Structure definition
   */
 typedef struct
@@ -193,15 +191,15 @@ typedef struct
 
   HAL_LockTypeDef                  Lock;             /*!< Locking object */
 
-  __IO HAL_SMARTCARD_StateTypeDef  gState;           /*!< SmartCard state information related to global Handle management 
+  __IO HAL_SMARTCARD_StateTypeDef  gState;           /*!< SmartCard state information related to global Handle management
                                                         and also related to Tx operations.
                                                         This parameter can be a value of @ref HAL_SMARTCARD_StateTypeDef */
-  
+
   __IO HAL_SMARTCARD_StateTypeDef  RxState;          /*!< SmartCard state information related to Rx operations.
                                                         This parameter can be a value of @ref HAL_SMARTCARD_StateTypeDef */
 
   __IO uint32_t                    ErrorCode;        /*!< SmartCard Error code */
-}SMARTCARD_HandleTypeDef;
+} SMARTCARD_HandleTypeDef;
 
 /**
   * @}
@@ -246,7 +244,7 @@ typedef struct
   * @{
   */
 #define SMARTCARD_PARITY_EVEN                    ((uint32_t)USART_CR1_PCE)
-#define SMARTCARD_PARITY_ODD                     ((uint32_t)(USART_CR1_PCE | USART_CR1_PS)) 
+#define SMARTCARD_PARITY_ODD                     ((uint32_t)(USART_CR1_PCE | USART_CR1_PS))
 /**
   * @}
   */
@@ -268,7 +266,7 @@ typedef struct
 #define SMARTCARD_POLARITY_HIGH                  ((uint32_t)USART_CR2_CPOL)
 /**
   * @}
-  */ 
+  */
 
 /** @defgroup SMARTCARD_Clock_Phase  SMARTCARD Clock Phase
   * @{
@@ -397,7 +395,7 @@ typedef struct
                                                             (__HANDLE__)->RxState = HAL_SMARTCARD_STATE_RESET;     \
                                                           } while(0U)
 
-/** @brief  Flush the Smartcard DR register 
+/** @brief  Flush the Smartcard DR register
   * @param  __HANDLE__: specifies the SMARTCARD Handle.
   *         SMARTCARD Handle selects the USARTx peripheral (USART availability and x value depending on device).
   */
@@ -427,12 +425,12 @@ typedef struct
   *         This parameter can be any combination of the following values:
   *            @arg SMARTCARD_FLAG_TC:   Transmission Complete flag.
   *            @arg SMARTCARD_FLAG_RXNE: Receive data register not empty flag.
-  *   
-  * @note   PE (Parity error), FE (Framing error), NE (Noise error) and ORE (OverRun 
-  *          error) flags are cleared by software sequence: a read operation to 
+  *
+  * @note   PE (Parity error), FE (Framing error), NE (Noise error) and ORE (OverRun
+  *          error) flags are cleared by software sequence: a read operation to
   *          USART_SR register followed by a read operation to USART_DR register.
   * @note   RXNE flag can be also cleared by a read to the USART_DR register.
-  * @note   TC flag can be also cleared by software sequence: a read operation to 
+  * @note   TC flag can be also cleared by software sequence: a read operation to
   *          USART_SR register followed by a write operation to USART_DR register.
   * @note   TXE flag is cleared only by a write to the USART_DR register.
   */
@@ -619,7 +617,7 @@ uint32_t HAL_SMARTCARD_GetError(SMARTCARD_HandleTypeDef *hsc);
   */
 
 /** @brief SMARTCARD interruptions flag mask
-  * 
+  *
   */
 #define SMARTCARD_IT_MASK                     0x0000FFFFU
 
@@ -670,7 +668,7 @@ uint32_t HAL_SMARTCARD_GetError(SMARTCARD_HandleTypeDef *hsc);
 
 /**
   * @}
-  */ 
+  */
 
 /**
   * @}

workspace/TS100/HAL_Driver/Inc/stm32f1xx_hal_spi.h

@@ -2,8 +2,6 @@
   ******************************************************************************
   * @file    stm32f1xx_hal_spi.h
   * @author  MCD Application Team
-  * @version V1.1.1
-  * @date    12-May-2017
   * @brief   Header file of SPI HAL module.
   ******************************************************************************
   * @attention

workspace/TS100/HAL_Driver/Inc/stm32f1xx_hal_sram.h

@@ -2,8 +2,6 @@
   ******************************************************************************
   * @file    stm32f1xx_hal_sram.h
   * @author  MCD Application Team
-  * @version V1.1.1
-  * @date    12-May-2017
   * @brief   Header file of SRAM HAL module.
   ******************************************************************************
   * @attention

workspace/TS100/HAL_Driver/Inc/stm32f1xx_hal_tim.h

@@ -2,8 +2,6 @@
   ******************************************************************************
   * @file    stm32f1xx_hal_tim.h
   * @author  MCD Application Team
-  * @version V1.1.1
-  * @date    12-May-2017
   * @brief   Header file of TIM HAL module.
   ******************************************************************************
   * @attention
@@ -460,8 +458,9 @@ typedef struct
 /** @defgroup TIM_Input_Capture_Polarity TIM Input Capture Polarity
   * @{
   */
-#define  TIM_ICPOLARITY_RISING             TIM_INPUTCHANNELPOLARITY_RISING
-#define  TIM_ICPOLARITY_FALLING            TIM_INPUTCHANNELPOLARITY_FALLING
+#define  TIM_ICPOLARITY_RISING             TIM_INPUTCHANNELPOLARITY_RISING      /*!< Capture triggered by rising edge on timer input */
+#define  TIM_ICPOLARITY_FALLING            TIM_INPUTCHANNELPOLARITY_FALLING     /*!< Capture triggered by falling edge on timer input */
+#define  TIM_ICPOLARITY_BOTHEDGE           TIM_INPUTCHANNELPOLARITY_BOTHEDGE    /*!< Capture triggered by both rising and falling edges on timer input */
 /**
   * @}
   */
@@ -939,8 +938,9 @@ typedef struct
                                                 ((CHANNEL) == TIM_CHANNEL_2) || \
                                                 ((CHANNEL) == TIM_CHANNEL_3))
 
-#define IS_TIM_IC_POLARITY(POLARITY) (((POLARITY) == TIM_ICPOLARITY_RISING)   || \
-                                      ((POLARITY) == TIM_ICPOLARITY_FALLING))
+#define IS_TIM_IC_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_ICPOLARITY_RISING)   || \
+                                          ((__POLARITY__) == TIM_ICPOLARITY_FALLING)  || \
+                                          ((__POLARITY__) == TIM_ICPOLARITY_BOTHEDGE))
 
 #define IS_TIM_IC_SELECTION(SELECTION) (((SELECTION) == TIM_ICSELECTION_DIRECTTI)   || \
                                         ((SELECTION) == TIM_ICSELECTION_INDIRECTTI) || \

workspace/TS100/HAL_Driver/Inc/stm32f1xx_hal_tim_ex.h

@@ -2,8 +2,6 @@
   ******************************************************************************
   * @file    stm32f1xx_hal_tim_ex.h
   * @author  MCD Application Team
-  * @version V1.1.1
-  * @date    12-May-2017
   * @brief   Header file of TIM HAL Extension module.
   ******************************************************************************
   * @attention

workspace/TS100/HAL_Driver/Inc/stm32f1xx_hal_uart.h

@@ -2,8 +2,6 @@
   ******************************************************************************
   * @file    stm32f1xx_hal_uart.h
   * @author  MCD Application Team
-  * @version V1.1.1
-  * @date    12-May-2017
   * @brief   Header file of UART HAL module.
   ******************************************************************************
   * @attention

workspace/TS100/HAL_Driver/Inc/stm32f1xx_hal_usart.h

@@ -2,8 +2,6 @@
   ******************************************************************************
   * @file    stm32f1xx_hal_usart.h
   * @author  MCD Application Team
-  * @version V1.1.1
-  * @date    12-May-2017
   * @brief   Header file of USART HAL module.
   ******************************************************************************
   * @attention

workspace/TS100/HAL_Driver/Inc/stm32f1xx_hal_wwdg.h

@@ -2,8 +2,6 @@
   ******************************************************************************
   * @file    stm32f1xx_hal_wwdg.h
   * @author  MCD Application Team
-  * @version V1.1.1
-  * @date    12-May-2017
   * @brief   Header file of WWDG HAL module.
   ******************************************************************************
   * @attention
@@ -33,14 +31,14 @@
   * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
   *
   ******************************************************************************
-  */ 
+  */
 
 /* Define to prevent recursive inclusion -------------------------------------*/
 #ifndef __STM32F1xx_HAL_WWDG_H
 #define __STM32F1xx_HAL_WWDG_H
 
 #ifdef __cplusplus
- extern "C" {
+extern "C" {
 #endif
 
 /* Includes ------------------------------------------------------------------*/
@@ -52,14 +50,14 @@
 
 /** @addtogroup WWDG
   * @{
-  */ 
+  */
 
 /* Exported types ------------------------------------------------------------*/
 /** @defgroup WWDG_Exported_Types WWDG Exported Types
   * @{
   */
 
-/** 
+/**
   * @brief  WWDG Init structure definition
   */
 typedef struct
@@ -76,7 +74,7 @@ typedef struct
   uint32_t EWIMode ;      /*!< Specifies if WWDG Early Wakeup Interupt is enable or not.
                                This parameter can be a value of @ref WWDG_EWI_Mode */
 
-}WWDG_InitTypeDef;
+} WWDG_InitTypeDef;
 
 /**
   * @brief  WWDG handle Structure definition
@@ -87,7 +85,7 @@ typedef struct
 
   WWDG_InitTypeDef             Init;       /*!< WWDG required parameters */
 
-}WWDG_HandleTypeDef;
+} WWDG_HandleTypeDef;
 /**
   * @}
   */
@@ -117,7 +115,7 @@ typedef struct
 
 /** @defgroup WWDG_Prescaler WWDG Prescaler
   * @{
-  */ 
+  */
 #define WWDG_PRESCALER_1                 0x00000000U  /*!< WWDG counter clock = (PCLK1/4096)/1 */
 #define WWDG_PRESCALER_2                  WWDG_CFR_WDGTB0  /*!< WWDG counter clock = (PCLK1/4096)/2 */
 #define WWDG_PRESCALER_4                  WWDG_CFR_WDGTB1  /*!< WWDG counter clock = (PCLK1/4096)/4 */
@@ -257,7 +255,7 @@ void                  HAL_WWDG_MspInit(WWDG_HandleTypeDef *hwwdg);
 /* I/O operation functions ******************************************************/
 HAL_StatusTypeDef     HAL_WWDG_Refresh(WWDG_HandleTypeDef *hwwdg);
 void                  HAL_WWDG_IRQHandler(WWDG_HandleTypeDef *hwwdg);
-void                  HAL_WWDG_EarlyWakeupCallback(WWDG_HandleTypeDef* hwwdg);
+void                  HAL_WWDG_EarlyWakeupCallback(WWDG_HandleTypeDef *hwwdg);
 /**
   * @}
   */

workspace/TS100/HAL_Driver/Inc/stm32f1xx_ll_adc.h

@@ -2,8 +2,6 @@
   ******************************************************************************
   * @file    stm32f1xx_ll_adc.h
   * @author  MCD Application Team
-  * @version V1.1.1
-  * @date    12-May-2017
   * @brief   Header file of ADC LL module.
   ******************************************************************************
   * @attention

workspace/TS100/HAL_Driver/Inc/stm32f1xx_ll_bus.h

@@ -2,8 +2,6 @@
   ******************************************************************************
   * @file    stm32f1xx_ll_bus.h
   * @author  MCD Application Team
-  * @version V1.1.1
-  * @date    12-May-2017
   * @brief   Header file of BUS LL module.
 
   @verbatim                

workspace/TS100/HAL_Driver/Inc/stm32f1xx_ll_cortex.h

@@ -2,8 +2,6 @@
   ******************************************************************************
   * @file    stm32f1xx_ll_cortex.h
   * @author  MCD Application Team
-  * @version V1.1.1
-  * @date    12-May-2017
   * @brief   Header file of CORTEX LL module.
   @verbatim
   ==============================================================================

workspace/TS100/HAL_Driver/Inc/stm32f1xx_ll_crc.h

@@ -2,8 +2,6 @@
   ******************************************************************************
   * @file    stm32f1xx_ll_crc.h
   * @author  MCD Application Team
-  * @version V1.1.1
-  * @date    12-May-2017
   * @brief   Header file of CRC LL module.
   ******************************************************************************
   * @attention

workspace/TS100/HAL_Driver/Inc/stm32f1xx_ll_dac.h

@@ -2,8 +2,6 @@
   ******************************************************************************
   * @file    stm32f1xx_ll_dac.h
   * @author  MCD Application Team
-  * @version V1.1.1
-  * @date    12-May-2017
   * @brief   Header file of DAC LL module.
   ******************************************************************************
   * @attention

workspace/TS100/HAL_Driver/Inc/stm32f1xx_ll_dma.h

@@ -2,8 +2,6 @@
   ******************************************************************************
   * @file    stm32f1xx_ll_dma.h
   * @author  MCD Application Team
-  * @version V1.1.1
-  * @date    12-May-2017
   * @brief   Header file of DMA LL module.
   ******************************************************************************
   * @attention

workspace/TS100/HAL_Driver/Inc/stm32f1xx_ll_exti.h

@@ -2,8 +2,6 @@
   ******************************************************************************
   * @file    stm32f1xx_ll_exti.h
   * @author  MCD Application Team
-  * @version V1.1.1
-  * @date    12-May-2017
   * @brief   Header file of EXTI LL module.
   ******************************************************************************
   * @attention

workspace/TS100/HAL_Driver/Inc/stm32f1xx_ll_fsmc.h

@@ -2,8 +2,6 @@
   ******************************************************************************
   * @file    stm32f1xx_ll_fsmc.h
   * @author  MCD Application Team
-  * @version V1.1.1
-  * @date    12-May-2017
   * @brief   Header file of FSMC HAL module.
   ******************************************************************************
   * @attention

workspace/TS100/HAL_Driver/Inc/stm32f1xx_ll_gpio.h

@@ -2,8 +2,6 @@
   ******************************************************************************
   * @file    stm32f1xx_ll_gpio.h
   * @author  MCD Application Team
-  * @version V1.1.1
-  * @date    12-May-2017
   * @brief   Header file of GPIO LL module.
   ******************************************************************************
   * @attention
@@ -58,16 +56,18 @@ extern "C" {
 
 /* Private types -------------------------------------------------------------*/
 /* Private variables ---------------------------------------------------------*/
-
 /* Private constants ---------------------------------------------------------*/
+
 /** @defgroup GPIO_LL_Private_Constants GPIO Private Constants
   * @{
   */
+/* Defines used for Pin Mask Initialization */
+#define GPIO_PIN_MASK_POS   8U
+#define GPIO_PIN_NB         16U
 /**
   * @}
   */
 
-
 /* Private macros ------------------------------------------------------------*/
 #if defined(USE_FULL_LL_DRIVER)
 /** @defgroup GPIO_LL_Private_Macros GPIO Private Macros
@@ -112,7 +112,7 @@ typedef struct
                               This parameter can be a value of @ref GPIO_LL_EC_PULL.
 
                               GPIO HW configuration can be modified afterwards using unitary function @ref LL_GPIO_SetPinPull().*/
-}LL_GPIO_InitTypeDef;
+} LL_GPIO_InitTypeDef;
 
 /**
   * @}
@@ -127,28 +127,28 @@ typedef struct
 /** @defgroup GPIO_LL_EC_PIN PIN
   * @{
   */
-#define LL_GPIO_PIN_0                    (GPIO_BSRR_BS0 << 8)  | 0x00000001U  /*!< Select pin 0 */
-#define LL_GPIO_PIN_1                    (GPIO_BSRR_BS1 << 8)  | 0x00000002U  /*!< Select pin 1 */
-#define LL_GPIO_PIN_2                    (GPIO_BSRR_BS2 << 8)  | 0x00000004U  /*!< Select pin 2 */
-#define LL_GPIO_PIN_3                    (GPIO_BSRR_BS3 << 8)  | 0x00000008U  /*!< Select pin 3 */
-#define LL_GPIO_PIN_4                    (GPIO_BSRR_BS4 << 8)  | 0x00000010U  /*!< Select pin 4 */
-#define LL_GPIO_PIN_5                    (GPIO_BSRR_BS5 << 8)  | 0x00000020U  /*!< Select pin 5 */
-#define LL_GPIO_PIN_6                    (GPIO_BSRR_BS6 << 8)  | 0x00000040U  /*!< Select pin 6 */
-#define LL_GPIO_PIN_7                    (GPIO_BSRR_BS7 << 8)  | 0x00000080U  /*!< Select pin 7 */
-#define LL_GPIO_PIN_8                    (GPIO_BSRR_BS8 << 8)  | 0x04000001U  /*!< Select pin 8 */
-#define LL_GPIO_PIN_9                    (GPIO_BSRR_BS9 << 8)  | 0x04000002U  /*!< Select pin 9 */
-#define LL_GPIO_PIN_10                   (GPIO_BSRR_BS10 << 8) | 0x04000004U  /*!< Select pin 10 */
-#define LL_GPIO_PIN_11                   (GPIO_BSRR_BS11 << 8) | 0x04000008U  /*!< Select pin 11 */
-#define LL_GPIO_PIN_12                   (GPIO_BSRR_BS12 << 8) | 0x04000010U  /*!< Select pin 12 */
-#define LL_GPIO_PIN_13                   (GPIO_BSRR_BS13 << 8) | 0x04000020U  /*!< Select pin 13 */
-#define LL_GPIO_PIN_14                   (GPIO_BSRR_BS14 << 8) | 0x04000040U  /*!< Select pin 14 */
-#define LL_GPIO_PIN_15                   (GPIO_BSRR_BS15 << 8) | 0x04000080U  /*!< Select pin 15 */
+#define LL_GPIO_PIN_0                    ((GPIO_BSRR_BS0  << GPIO_PIN_MASK_POS) | 0x00000001U)  /*!< Select pin 0  */
+#define LL_GPIO_PIN_1                    ((GPIO_BSRR_BS1  << GPIO_PIN_MASK_POS) | 0x00000002U)  /*!< Select pin 1  */
+#define LL_GPIO_PIN_2                    ((GPIO_BSRR_BS2  << GPIO_PIN_MASK_POS) | 0x00000004U)  /*!< Select pin 2  */
+#define LL_GPIO_PIN_3                    ((GPIO_BSRR_BS3  << GPIO_PIN_MASK_POS) | 0x00000008U)  /*!< Select pin 3  */
+#define LL_GPIO_PIN_4                    ((GPIO_BSRR_BS4  << GPIO_PIN_MASK_POS) | 0x00000010U)  /*!< Select pin 4  */
+#define LL_GPIO_PIN_5                    ((GPIO_BSRR_BS5  << GPIO_PIN_MASK_POS) | 0x00000020U)  /*!< Select pin 5  */
+#define LL_GPIO_PIN_6                    ((GPIO_BSRR_BS6  << GPIO_PIN_MASK_POS) | 0x00000040U)  /*!< Select pin 6  */
+#define LL_GPIO_PIN_7                    ((GPIO_BSRR_BS7  << GPIO_PIN_MASK_POS) | 0x00000080U)  /*!< Select pin 7  */
+#define LL_GPIO_PIN_8                    ((GPIO_BSRR_BS8  << GPIO_PIN_MASK_POS) | 0x04000001U)  /*!< Select pin 8  */
+#define LL_GPIO_PIN_9                    ((GPIO_BSRR_BS9  << GPIO_PIN_MASK_POS) | 0x04000002U)  /*!< Select pin 9  */
+#define LL_GPIO_PIN_10                   ((GPIO_BSRR_BS10 << GPIO_PIN_MASK_POS) | 0x04000004U)  /*!< Select pin 10 */
+#define LL_GPIO_PIN_11                   ((GPIO_BSRR_BS11 << GPIO_PIN_MASK_POS) | 0x04000008U)  /*!< Select pin 11 */
+#define LL_GPIO_PIN_12                   ((GPIO_BSRR_BS12 << GPIO_PIN_MASK_POS) | 0x04000010U)  /*!< Select pin 12 */
+#define LL_GPIO_PIN_13                   ((GPIO_BSRR_BS13 << GPIO_PIN_MASK_POS) | 0x04000020U)  /*!< Select pin 13 */
+#define LL_GPIO_PIN_14                   ((GPIO_BSRR_BS14 << GPIO_PIN_MASK_POS) | 0x04000040U)  /*!< Select pin 14 */
+#define LL_GPIO_PIN_15                   ((GPIO_BSRR_BS15 << GPIO_PIN_MASK_POS) | 0x04000080U)  /*!< Select pin 15 */
 #define LL_GPIO_PIN_ALL                  (LL_GPIO_PIN_0  | LL_GPIO_PIN_1  | LL_GPIO_PIN_2  | \
                                           LL_GPIO_PIN_3  | LL_GPIO_PIN_4  | LL_GPIO_PIN_5  | \
                                           LL_GPIO_PIN_6  | LL_GPIO_PIN_7  | LL_GPIO_PIN_8  | \
                                           LL_GPIO_PIN_9  | LL_GPIO_PIN_10 | LL_GPIO_PIN_11 | \
                                           LL_GPIO_PIN_12 | LL_GPIO_PIN_13 | LL_GPIO_PIN_14 | \
-                                          LL_GPIO_PIN_15) /*!< Select all pins */
+                                          LL_GPIO_PIN_15)                                      /*!< Select all pins */
 /**
   * @}
   */
@@ -156,11 +156,11 @@ typedef struct
 /** @defgroup GPIO_LL_EC_MODE Mode
   * @{
   */
-#define LL_GPIO_MODE_ANALOG                0x00000000U   /*!< Select analog mode */
-#define LL_GPIO_MODE_FLOATING              GPIO_CRL_CNF0_0   /*!< Select floating mode */
-#define LL_GPIO_MODE_INPUT                 GPIO_CRL_CNF0_1   /*!< Select input mode */
-#define LL_GPIO_MODE_OUTPUT                GPIO_CRL_MODE0_0   /*!< Select general purpose output mode */
-#define LL_GPIO_MODE_ALTERNATE             (GPIO_CRL_CNF0_1 | GPIO_CRL_MODE0_0) /*!< Select alternate function mode */
+#define LL_GPIO_MODE_ANALOG              0x00000000U       /*!< Select analog mode */
+#define LL_GPIO_MODE_FLOATING            GPIO_CRL_CNF0_0   /*!< Select floating mode */
+#define LL_GPIO_MODE_INPUT               GPIO_CRL_CNF0_1   /*!< Select input mode */
+#define LL_GPIO_MODE_OUTPUT              GPIO_CRL_MODE0_0  /*!< Select general purpose output mode */
+#define LL_GPIO_MODE_ALTERNATE           (GPIO_CRL_CNF0_1 | GPIO_CRL_MODE0_0) /*!< Select alternate function mode */
 /**
   * @}
   */
@@ -168,8 +168,8 @@ typedef struct
 /** @defgroup GPIO_LL_EC_OUTPUT Output Type
   * @{
   */
-#define LL_GPIO_OUTPUT_PUSHPULL            0x00000000U /*!< Select push-pull as output type */
-#define LL_GPIO_OUTPUT_OPENDRAIN           GPIO_CRL_CNF0_0 /*!< Select open-drain as output type */
+#define LL_GPIO_OUTPUT_PUSHPULL          0x00000000U                /*!< Select push-pull as output type */
+#define LL_GPIO_OUTPUT_OPENDRAIN         GPIO_CRL_CNF0_0            /*!< Select open-drain as output type */
 /**
   * @}
   */
@@ -177,13 +177,13 @@ typedef struct
 /** @defgroup GPIO_LL_EC_SPEED Output Speed
   * @{
   */
-#define LL_GPIO_MODE_OUTPUT_10MHz      GPIO_CRL_MODE0_0            /*!< Select Output mode, max speed 10 MHz */
-#define LL_GPIO_MODE_OUTPUT_2MHz       GPIO_CRL_MODE0_1            /*!< Select Output mode, max speed 20 MHz */
-#define LL_GPIO_MODE_OUTPUT_50MHz      GPIO_CRL_MODE0              /*!< Select Output mode, max speed 50 MHz */
+#define LL_GPIO_MODE_OUTPUT_10MHz        GPIO_CRL_MODE0_0            /*!< Select Output mode, max speed 10 MHz */
+#define LL_GPIO_MODE_OUTPUT_2MHz         GPIO_CRL_MODE0_1            /*!< Select Output mode, max speed 20 MHz */
+#define LL_GPIO_MODE_OUTPUT_50MHz        GPIO_CRL_MODE0              /*!< Select Output mode, max speed 50 MHz */
 /**
   * @}
   */
-  
+
 #define LL_GPIO_SPEED_FREQ_LOW           LL_GPIO_MODE_OUTPUT_2MHz    /*!< Select I/O low output speed    */
 #define LL_GPIO_SPEED_FREQ_MEDIUM        LL_GPIO_MODE_OUTPUT_10MHz   /*!< Select I/O medium output speed */
 #define LL_GPIO_SPEED_FREQ_HIGH          LL_GPIO_MODE_OUTPUT_50MHz   /*!< Select I/O high output speed   */
@@ -191,13 +191,13 @@ typedef struct
 /** @defgroup GPIO_LL_EC_PULL Pull Up Pull Down
   * @{
   */
-#define LL_GPIO_PULL_DOWN                  0x00000000U    /*!< Select I/O pull down */
-#define LL_GPIO_PULL_UP                    GPIO_ODR_ODR0  /*!< Select I/O pull up */
+#define LL_GPIO_PULL_DOWN                0x00000000U    /*!< Select I/O pull down */
+#define LL_GPIO_PULL_UP                  GPIO_ODR_ODR0  /*!< Select I/O pull up */
 
 /**
   * @}
   */
-  
+
 /** @defgroup GPIO_LL_EVENTOUT_PIN EVENTOUT Pin
   * @{
   */
@@ -240,13 +240,13 @@ typedef struct
 /** @defgroup GPIO_LL_EC_EXTI_PORT GPIO EXTI PORT
   * @{
   */
-#define LL_GPIO_AF_EXTI_PORTA            (uint32_t)0   /*!< EXTI PORT A */
-#define LL_GPIO_AF_EXTI_PORTB            (uint32_t)1   /*!< EXTI PORT B */
-#define LL_GPIO_AF_EXTI_PORTC            (uint32_t)2   /*!< EXTI PORT C */
-#define LL_GPIO_AF_EXTI_PORTD            (uint32_t)3   /*!< EXTI PORT D */
-#define LL_GPIO_AF_EXTI_PORTE            (uint32_t)4   /*!< EXTI PORT E */
-#define LL_GPIO_AF_EXTI_PORTF            (uint32_t)5   /*!< EXTI PORT F */
-#define LL_GPIO_AF_EXTI_PORTG            (uint32_t)6   /*!< EXTI PORT G */
+#define LL_GPIO_AF_EXTI_PORTA            0U   /*!< EXTI PORT A */
+#define LL_GPIO_AF_EXTI_PORTB            1U   /*!< EXTI PORT B */
+#define LL_GPIO_AF_EXTI_PORTC            2U   /*!< EXTI PORT C */
+#define LL_GPIO_AF_EXTI_PORTD            3U   /*!< EXTI PORT D */
+#define LL_GPIO_AF_EXTI_PORTE            4U   /*!< EXTI PORT E */
+#define LL_GPIO_AF_EXTI_PORTF            5U   /*!< EXTI PORT F */
+#define LL_GPIO_AF_EXTI_PORTG            6U   /*!< EXTI PORT G */
 /**
   * @}
   */
@@ -254,22 +254,22 @@ typedef struct
 /** @defgroup GPIO_LL_EC_EXTI_LINE GPIO EXTI LINE
   * @{
   */
-#define LL_GPIO_AF_EXTI_LINE0            (uint32_t)(0x000FU << 16 | 0)  /*!< EXTI_POSITION_0  | EXTICR[0] */
-#define LL_GPIO_AF_EXTI_LINE1            (uint32_t)(0x00F0U << 16 | 0)  /*!< EXTI_POSITION_4  | EXTICR[0] */
-#define LL_GPIO_AF_EXTI_LINE2            (uint32_t)(0x0F00U << 16 | 0)  /*!< EXTI_POSITION_8  | EXTICR[0] */
-#define LL_GPIO_AF_EXTI_LINE3            (uint32_t)(0xF000U << 16 | 0)  /*!< EXTI_POSITION_12 | EXTICR[0] */
-#define LL_GPIO_AF_EXTI_LINE4            (uint32_t)(0x000FU << 16 | 1)  /*!< EXTI_POSITION_0  | EXTICR[1] */
-#define LL_GPIO_AF_EXTI_LINE5            (uint32_t)(0x00F0U << 16 | 1)  /*!< EXTI_POSITION_4  | EXTICR[1] */
-#define LL_GPIO_AF_EXTI_LINE6            (uint32_t)(0x0F00U << 16 | 1)  /*!< EXTI_POSITION_8  | EXTICR[1] */
-#define LL_GPIO_AF_EXTI_LINE7            (uint32_t)(0xF000U << 16 | 1)  /*!< EXTI_POSITION_12 | EXTICR[1] */
-#define LL_GPIO_AF_EXTI_LINE8            (uint32_t)(0x000FU << 16 | 2)  /*!< EXTI_POSITION_0  | EXTICR[2] */
-#define LL_GPIO_AF_EXTI_LINE9            (uint32_t)(0x00F0U << 16 | 2)  /*!< EXTI_POSITION_4  | EXTICR[2] */
-#define LL_GPIO_AF_EXTI_LINE10           (uint32_t)(0x0F00U << 16 | 2)  /*!< EXTI_POSITION_8  | EXTICR[2] */
-#define LL_GPIO_AF_EXTI_LINE11           (uint32_t)(0xF000U << 16 | 2)  /*!< EXTI_POSITION_12 | EXTICR[2] */
-#define LL_GPIO_AF_EXTI_LINE12           (uint32_t)(0x000FU << 16 | 3)  /*!< EXTI_POSITION_0  | EXTICR[3] */
-#define LL_GPIO_AF_EXTI_LINE13           (uint32_t)(0x00F0U << 16 | 3)  /*!< EXTI_POSITION_4  | EXTICR[3] */
-#define LL_GPIO_AF_EXTI_LINE14           (uint32_t)(0x0F00U << 16 | 3)  /*!< EXTI_POSITION_8  | EXTICR[3] */
-#define LL_GPIO_AF_EXTI_LINE15           (uint32_t)(0xF000U << 16 | 3)  /*!< EXTI_POSITION_12 | EXTICR[3] */
+#define LL_GPIO_AF_EXTI_LINE0            (0x000FU << 16U | 0U)  /*!< EXTI_POSITION_0  | EXTICR[0] */
+#define LL_GPIO_AF_EXTI_LINE1            (0x00F0U << 16U | 0U)  /*!< EXTI_POSITION_4  | EXTICR[0] */
+#define LL_GPIO_AF_EXTI_LINE2            (0x0F00U << 16U | 0U)  /*!< EXTI_POSITION_8  | EXTICR[0] */
+#define LL_GPIO_AF_EXTI_LINE3            (0xF000U << 16U | 0U)  /*!< EXTI_POSITION_12 | EXTICR[0] */
+#define LL_GPIO_AF_EXTI_LINE4            (0x000FU << 16U | 1U)  /*!< EXTI_POSITION_0  | EXTICR[1] */
+#define LL_GPIO_AF_EXTI_LINE5            (0x00F0U << 16U | 1U)  /*!< EXTI_POSITION_4  | EXTICR[1] */
+#define LL_GPIO_AF_EXTI_LINE6            (0x0F00U << 16U | 1U)  /*!< EXTI_POSITION_8  | EXTICR[1] */
+#define LL_GPIO_AF_EXTI_LINE7            (0xF000U << 16U | 1U)  /*!< EXTI_POSITION_12 | EXTICR[1] */
+#define LL_GPIO_AF_EXTI_LINE8            (0x000FU << 16U | 2U)  /*!< EXTI_POSITION_0  | EXTICR[2] */
+#define LL_GPIO_AF_EXTI_LINE9            (0x00F0U << 16U | 2U)  /*!< EXTI_POSITION_4  | EXTICR[2] */
+#define LL_GPIO_AF_EXTI_LINE10           (0x0F00U << 16U | 2U)  /*!< EXTI_POSITION_8  | EXTICR[2] */
+#define LL_GPIO_AF_EXTI_LINE11           (0xF000U << 16U | 2U)  /*!< EXTI_POSITION_12 | EXTICR[2] */
+#define LL_GPIO_AF_EXTI_LINE12           (0x000FU << 16U | 3U)  /*!< EXTI_POSITION_0  | EXTICR[3] */
+#define LL_GPIO_AF_EXTI_LINE13           (0x00F0U << 16U | 3U)  /*!< EXTI_POSITION_4  | EXTICR[3] */
+#define LL_GPIO_AF_EXTI_LINE14           (0x0F00U << 16U | 3U)  /*!< EXTI_POSITION_8  | EXTICR[3] */
+#define LL_GPIO_AF_EXTI_LINE15           (0xF000U << 16U | 3U)  /*!< EXTI_POSITION_12 | EXTICR[3] */
 /**
   * @}
   */
@@ -357,8 +357,8 @@ typedef struct
   */
 __STATIC_INLINE void LL_GPIO_SetPinMode(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Mode)
 {
-  register uint32_t *pReg = (uint32_t *)((uint32_t)((uint32_t)(&GPIOx->CRL) + (Pin>>24)));
-  MODIFY_REG(*pReg, ((GPIO_CRL_CNF0|GPIO_CRL_MODE0) << (POSITION_VAL(Pin) * 4U)), (Mode << (POSITION_VAL(Pin) * 4U)));
+  register uint32_t *pReg = (uint32_t *)((uint32_t)(&GPIOx->CRL) + (Pin >> 24));
+  MODIFY_REG(*pReg, ((GPIO_CRL_CNF0 | GPIO_CRL_MODE0) << (POSITION_VAL(Pin) * 4U)), (Mode << (POSITION_VAL(Pin) * 4U)));
 }
 
 /**
@@ -397,9 +397,8 @@ __STATIC_INLINE void LL_GPIO_SetPinMode(GPIO_TypeDef *GPIOx, uint32_t Pin, uint3
   */
 __STATIC_INLINE uint32_t LL_GPIO_GetPinMode(GPIO_TypeDef *GPIOx, uint32_t Pin)
 {
-  register uint32_t *pReg = (uint32_t *)((uint32_t)((uint32_t)(&GPIOx->CRL) + (Pin>>24)));
-  return (uint32_t)(READ_BIT(*pReg,
-                             ((GPIO_CRL_CNF0|GPIO_CRL_MODE0) << (POSITION_VAL(Pin) * 4U))) >> (POSITION_VAL(Pin) * 4U));
+  register uint32_t *pReg = (uint32_t *)((uint32_t)(&GPIOx->CRL) + (Pin >> 24));
+  return (READ_BIT(*pReg, ((GPIO_CRL_CNF0 | GPIO_CRL_MODE0) << (POSITION_VAL(Pin) * 4U))) >> (POSITION_VAL(Pin) * 4U));
 }
 
 /**
@@ -436,7 +435,7 @@ __STATIC_INLINE uint32_t LL_GPIO_GetPinMode(GPIO_TypeDef *GPIOx, uint32_t Pin)
   */
 __STATIC_INLINE void LL_GPIO_SetPinSpeed(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t  Speed)
 {
-  register uint32_t *pReg = (uint32_t *)((uint32_t)((uint32_t)(&GPIOx->CRL) + (Pin>>24)));
+  register uint32_t *pReg = (uint32_t *)((uint32_t)(&GPIOx->CRL) + (Pin >> 24));
   MODIFY_REG(*pReg, (GPIO_CRL_MODE0 << (POSITION_VAL(Pin) * 4U)),
              (Speed << (POSITION_VAL(Pin) * 4U)));
 }
@@ -474,9 +473,8 @@ __STATIC_INLINE void LL_GPIO_SetPinSpeed(GPIO_TypeDef *GPIOx, uint32_t Pin, uint
   */
 __STATIC_INLINE uint32_t LL_GPIO_GetPinSpeed(GPIO_TypeDef *GPIOx, uint32_t Pin)
 {
-  register uint32_t *pReg = (uint32_t *)((uint32_t)((uint32_t)(&GPIOx->CRL) + (Pin>>24)));
-  return (uint32_t)(READ_BIT(*pReg,
-                             (GPIO_CRL_MODE0 << (POSITION_VAL(Pin) * 4U))) >> (POSITION_VAL(Pin) * 4U));
+  register uint32_t *pReg = (uint32_t *)((uint32_t)(&GPIOx->CRL) + (Pin >> 24));
+  return (READ_BIT(*pReg, (GPIO_CRL_MODE0 << (POSITION_VAL(Pin) * 4U))) >> (POSITION_VAL(Pin) * 4U));
 }
 
 /**
@@ -511,7 +509,7 @@ __STATIC_INLINE uint32_t LL_GPIO_GetPinSpeed(GPIO_TypeDef *GPIOx, uint32_t Pin)
   */
 __STATIC_INLINE void LL_GPIO_SetPinOutputType(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t OutputType)
 {
-  register uint32_t *pReg = (uint32_t *)((uint32_t)((uint32_t)(&GPIOx->CRL) + (Pin>>24)));
+  register uint32_t *pReg = (uint32_t *)((uint32_t)(&GPIOx->CRL) + (Pin >> 24));
   MODIFY_REG(*pReg, (GPIO_CRL_CNF0_0 << (POSITION_VAL(Pin) * 4U)),
              (OutputType << (POSITION_VAL(Pin) * 4U)));
 }
@@ -548,9 +546,8 @@ __STATIC_INLINE void LL_GPIO_SetPinOutputType(GPIO_TypeDef *GPIOx, uint32_t Pin,
   */
 __STATIC_INLINE uint32_t LL_GPIO_GetPinOutputType(GPIO_TypeDef *GPIOx, uint32_t Pin)
 {
-  register uint32_t *pReg = (uint32_t *)((uint32_t)((uint32_t)(&GPIOx->CRL) + (Pin>>24)));
-  return (uint32_t)(READ_BIT(*pReg,
-                            (GPIO_CRL_CNF0_0 << (POSITION_VAL(Pin) * 4U))) >> (POSITION_VAL(Pin) * 4U));
+  register uint32_t *pReg = (uint32_t *)((uint32_t)(&GPIOx->CRL) + (Pin >> 24));
+  return (READ_BIT(*pReg, (GPIO_CRL_CNF0_0 << (POSITION_VAL(Pin) * 4U))) >> (POSITION_VAL(Pin) * 4U));
 
 }
 
@@ -583,7 +580,7 @@ __STATIC_INLINE uint32_t LL_GPIO_GetPinOutputType(GPIO_TypeDef *GPIOx, uint32_t
   */
 __STATIC_INLINE void LL_GPIO_SetPinPull(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Pull)
 {
-  MODIFY_REG(GPIOx->ODR, (Pin>>8) , Pull << (POSITION_VAL(Pin>>8)));
+  MODIFY_REG(GPIOx->ODR, (Pin >> GPIO_PIN_MASK_POS), Pull << (POSITION_VAL(Pin >> GPIO_PIN_MASK_POS)));
 }
 
 /**
@@ -614,8 +611,7 @@ __STATIC_INLINE void LL_GPIO_SetPinPull(GPIO_TypeDef *GPIOx, uint32_t Pin, uint3
   */
 __STATIC_INLINE uint32_t LL_GPIO_GetPinPull(GPIO_TypeDef *GPIOx, uint32_t Pin)
 {
-  return (uint32_t)(READ_BIT(GPIOx->ODR,
-                             (GPIO_ODR_ODR0 << (POSITION_VAL(Pin>>8)))) >> (POSITION_VAL(Pin>>8)));
+  return (READ_BIT(GPIOx->ODR, (GPIO_ODR_ODR0 << (POSITION_VAL(Pin >> GPIO_PIN_MASK_POS)))) >> (POSITION_VAL(Pin >> GPIO_PIN_MASK_POS)));
 }
 
 /**
@@ -650,9 +646,9 @@ __STATIC_INLINE uint32_t LL_GPIO_GetPinPull(GPIO_TypeDef *GPIOx, uint32_t Pin)
 __STATIC_INLINE void LL_GPIO_LockPin(GPIO_TypeDef *GPIOx, uint32_t PinMask)
 {
   __IO uint32_t temp;
-  WRITE_REG(GPIOx->LCKR, GPIO_LCKR_LCKK | ((PinMask >> 8) & 0x0000FFFFU));
-  WRITE_REG(GPIOx->LCKR, ((PinMask >>8 ) & 0x0000FFFFU));
-  WRITE_REG(GPIOx->LCKR, GPIO_LCKR_LCKK | ((PinMask>>8) & 0x0000FFFFU));
+  WRITE_REG(GPIOx->LCKR, GPIO_LCKR_LCKK | ((PinMask >> GPIO_PIN_MASK_POS) & 0x0000FFFFU));
+  WRITE_REG(GPIOx->LCKR, ((PinMask >> GPIO_PIN_MASK_POS) & 0x0000FFFFU));
+  WRITE_REG(GPIOx->LCKR, GPIO_LCKR_LCKK | ((PinMask >> GPIO_PIN_MASK_POS) & 0x0000FFFFU));
   temp = READ_REG(GPIOx->LCKR);
   (void) temp;
 }
@@ -683,7 +679,7 @@ __STATIC_INLINE void LL_GPIO_LockPin(GPIO_TypeDef *GPIOx, uint32_t PinMask)
   */
 __STATIC_INLINE uint32_t LL_GPIO_IsPinLocked(GPIO_TypeDef *GPIOx, uint32_t PinMask)
 {
-  return (READ_BIT(GPIOx->LCKR, ((PinMask >> 8 ) & 0x0000FFFFU)) == ((PinMask >>8 ) & 0x0000FFFFU));
+  return (READ_BIT(GPIOx->LCKR, ((PinMask >> GPIO_PIN_MASK_POS) & 0x0000FFFFU)) == ((PinMask >> GPIO_PIN_MASK_POS) & 0x0000FFFFU));
 }
 
 /**
@@ -713,7 +709,7 @@ __STATIC_INLINE uint32_t LL_GPIO_IsAnyPinLocked(GPIO_TypeDef *GPIOx)
   */
 __STATIC_INLINE uint32_t LL_GPIO_ReadInputPort(GPIO_TypeDef *GPIOx)
 {
-  return (uint32_t)(READ_REG(GPIOx->IDR));
+  return (READ_REG(GPIOx->IDR));
 }
 
 /**
@@ -742,7 +738,7 @@ __STATIC_INLINE uint32_t LL_GPIO_ReadInputPort(GPIO_TypeDef *GPIOx)
   */
 __STATIC_INLINE uint32_t LL_GPIO_IsInputPinSet(GPIO_TypeDef *GPIOx, uint32_t PinMask)
 {
-  return (READ_BIT(GPIOx->IDR, (PinMask >> 8 ) & 0x0000FFFFU) == ((PinMask >> 8 ) & 0x0000FFFFU));
+  return (READ_BIT(GPIOx->IDR, (PinMask >> GPIO_PIN_MASK_POS) & 0x0000FFFFU) == ((PinMask >> GPIO_PIN_MASK_POS) & 0x0000FFFFU));
 }
 
 /**
@@ -794,7 +790,7 @@ __STATIC_INLINE uint32_t LL_GPIO_ReadOutputPort(GPIO_TypeDef *GPIOx)
   */
 __STATIC_INLINE uint32_t LL_GPIO_IsOutputPinSet(GPIO_TypeDef *GPIOx, uint32_t PinMask)
 {
-  return (READ_BIT(GPIOx->ODR, (PinMask >> 8 ) & 0x0000FFFFU) == ((PinMask >> 8 ) & 0x0000FFFFU));
+  return (READ_BIT(GPIOx->ODR, (PinMask >> GPIO_PIN_MASK_POS) & 0x0000FFFFU) == ((PinMask >> GPIO_PIN_MASK_POS) & 0x0000FFFFU));
 }
 
 /**
@@ -823,7 +819,7 @@ __STATIC_INLINE uint32_t LL_GPIO_IsOutputPinSet(GPIO_TypeDef *GPIOx, uint32_t Pi
   */
 __STATIC_INLINE void LL_GPIO_SetOutputPin(GPIO_TypeDef *GPIOx, uint32_t PinMask)
 {
-  WRITE_REG(GPIOx->BSRR, (PinMask >> 8) & 0x0000FFFFU);
+  WRITE_REG(GPIOx->BSRR, (PinMask >> GPIO_PIN_MASK_POS) & 0x0000FFFFU);
 }
 
 /**
@@ -852,7 +848,7 @@ __STATIC_INLINE void LL_GPIO_SetOutputPin(GPIO_TypeDef *GPIOx, uint32_t PinMask)
   */
 __STATIC_INLINE void LL_GPIO_ResetOutputPin(GPIO_TypeDef *GPIOx, uint32_t PinMask)
 {
-  WRITE_REG(GPIOx->BRR, (PinMask >> 8 ) & 0x0000FFFFU);
+  WRITE_REG(GPIOx->BRR, (PinMask >> GPIO_PIN_MASK_POS) & 0x0000FFFFU);
 }
 
 /**
@@ -881,7 +877,7 @@ __STATIC_INLINE void LL_GPIO_ResetOutputPin(GPIO_TypeDef *GPIOx, uint32_t PinMas
   */
 __STATIC_INLINE void LL_GPIO_TogglePin(GPIO_TypeDef *GPIOx, uint32_t PinMask)
 {
-  WRITE_REG(GPIOx->ODR, READ_REG(GPIOx->ODR) ^ ((PinMask >> 8 ) & 0x0000FFFFU));
+  WRITE_REG(GPIOx->ODR, READ_REG(GPIOx->ODR) ^ ((PinMask >> GPIO_PIN_MASK_POS) & 0x0000FFFFU));
 }
 
 /**
@@ -1031,7 +1027,7 @@ __STATIC_INLINE uint32_t LL_GPIO_AF_IsEnabledRemap_USART2(void)
 __STATIC_INLINE void LL_GPIO_AF_EnableRemap_USART3(void)
 {
   CLEAR_BIT(AFIO->MAPR, AFIO_MAPR_USART3_REMAP);
-  SET_BIT(AFIO->MAPR, AFIO_MAPR_USART3_REMAP_FULLREMAP); 
+  SET_BIT(AFIO->MAPR, AFIO_MAPR_USART3_REMAP_FULLREMAP);
 }
 
 /**
@@ -1043,7 +1039,7 @@ __STATIC_INLINE void LL_GPIO_AF_EnableRemap_USART3(void)
 __STATIC_INLINE void LL_GPIO_AF_RemapPartial_USART3(void)
 {
   CLEAR_BIT(AFIO->MAPR, AFIO_MAPR_USART3_REMAP);
-  SET_BIT(AFIO->MAPR, AFIO_MAPR_USART3_REMAP_PARTIALREMAP); 
+  SET_BIT(AFIO->MAPR, AFIO_MAPR_USART3_REMAP_PARTIALREMAP);
 }
 
 /**
@@ -1055,7 +1051,7 @@ __STATIC_INLINE void LL_GPIO_AF_RemapPartial_USART3(void)
 __STATIC_INLINE void LL_GPIO_AF_DisableRemap_USART3(void)
 {
   CLEAR_BIT(AFIO->MAPR, AFIO_MAPR_USART3_REMAP);
-  SET_BIT(AFIO->MAPR, AFIO_MAPR_USART3_REMAP_NOREMAP); 
+  SET_BIT(AFIO->MAPR, AFIO_MAPR_USART3_REMAP_NOREMAP);
 }
 #endif
 
@@ -1068,7 +1064,7 @@ __STATIC_INLINE void LL_GPIO_AF_DisableRemap_USART3(void)
 __STATIC_INLINE void LL_GPIO_AF_EnableRemap_TIM1(void)
 {
   CLEAR_BIT(AFIO->MAPR, AFIO_MAPR_TIM1_REMAP);
-  SET_BIT(AFIO->MAPR, AFIO_MAPR_TIM1_REMAP_FULLREMAP); 
+  SET_BIT(AFIO->MAPR, AFIO_MAPR_TIM1_REMAP_FULLREMAP);
 }
 
 /**
@@ -1080,7 +1076,7 @@ __STATIC_INLINE void LL_GPIO_AF_EnableRemap_TIM1(void)
 __STATIC_INLINE void LL_GPIO_AF_RemapPartial_TIM1(void)
 {
   CLEAR_BIT(AFIO->MAPR, AFIO_MAPR_TIM1_REMAP);
-  SET_BIT(AFIO->MAPR, AFIO_MAPR_TIM1_REMAP_PARTIALREMAP); 
+  SET_BIT(AFIO->MAPR, AFIO_MAPR_TIM1_REMAP_PARTIALREMAP);
 }
 
 /**
@@ -1092,7 +1088,7 @@ __STATIC_INLINE void LL_GPIO_AF_RemapPartial_TIM1(void)
 __STATIC_INLINE void LL_GPIO_AF_DisableRemap_TIM1(void)
 {
   CLEAR_BIT(AFIO->MAPR, AFIO_MAPR_TIM1_REMAP);
-  SET_BIT(AFIO->MAPR, AFIO_MAPR_TIM1_REMAP_NOREMAP); 
+  SET_BIT(AFIO->MAPR, AFIO_MAPR_TIM1_REMAP_NOREMAP);
 }
 
 /**
@@ -1104,7 +1100,7 @@ __STATIC_INLINE void LL_GPIO_AF_DisableRemap_TIM1(void)
 __STATIC_INLINE void LL_GPIO_AF_EnableRemap_TIM2(void)
 {
   CLEAR_BIT(AFIO->MAPR, AFIO_MAPR_TIM2_REMAP);
-  SET_BIT(AFIO->MAPR, AFIO_MAPR_TIM2_REMAP_FULLREMAP); 
+  SET_BIT(AFIO->MAPR, AFIO_MAPR_TIM2_REMAP_FULLREMAP);
 }
 
 /**
@@ -1116,7 +1112,7 @@ __STATIC_INLINE void LL_GPIO_AF_EnableRemap_TIM2(void)
 __STATIC_INLINE void LL_GPIO_AF_RemapPartial2_TIM2(void)
 {
   CLEAR_BIT(AFIO->MAPR, AFIO_MAPR_TIM2_REMAP);
-  SET_BIT(AFIO->MAPR, AFIO_MAPR_TIM2_REMAP_PARTIALREMAP2); 
+  SET_BIT(AFIO->MAPR, AFIO_MAPR_TIM2_REMAP_PARTIALREMAP2);
 }
 
 /**
@@ -1128,7 +1124,7 @@ __STATIC_INLINE void LL_GPIO_AF_RemapPartial2_TIM2(void)
 __STATIC_INLINE void LL_GPIO_AF_RemapPartial1_TIM2(void)
 {
   CLEAR_BIT(AFIO->MAPR, AFIO_MAPR_TIM2_REMAP);
-  SET_BIT(AFIO->MAPR, AFIO_MAPR_TIM2_REMAP_PARTIALREMAP1); 
+  SET_BIT(AFIO->MAPR, AFIO_MAPR_TIM2_REMAP_PARTIALREMAP1);
 }
 
 /**
@@ -1140,7 +1136,7 @@ __STATIC_INLINE void LL_GPIO_AF_RemapPartial1_TIM2(void)
 __STATIC_INLINE void LL_GPIO_AF_DisableRemap_TIM2(void)
 {
   CLEAR_BIT(AFIO->MAPR, AFIO_MAPR_TIM2_REMAP);
-  SET_BIT(AFIO->MAPR, AFIO_MAPR_TIM2_REMAP_NOREMAP); 
+  SET_BIT(AFIO->MAPR, AFIO_MAPR_TIM2_REMAP_NOREMAP);
 }
 
 /**
@@ -1153,7 +1149,7 @@ __STATIC_INLINE void LL_GPIO_AF_DisableRemap_TIM2(void)
 __STATIC_INLINE void LL_GPIO_AF_EnableRemap_TIM3(void)
 {
   CLEAR_BIT(AFIO->MAPR, AFIO_MAPR_TIM3_REMAP);
-  SET_BIT(AFIO->MAPR, AFIO_MAPR_TIM3_REMAP_FULLREMAP); 
+  SET_BIT(AFIO->MAPR, AFIO_MAPR_TIM3_REMAP_FULLREMAP);
 }
 
 /**
@@ -1166,7 +1162,7 @@ __STATIC_INLINE void LL_GPIO_AF_EnableRemap_TIM3(void)
 __STATIC_INLINE void LL_GPIO_AF_RemapPartial_TIM3(void)
 {
   CLEAR_BIT(AFIO->MAPR, AFIO_MAPR_TIM3_REMAP);
-  SET_BIT(AFIO->MAPR, AFIO_MAPR_TIM3_REMAP_PARTIALREMAP); 
+  SET_BIT(AFIO->MAPR, AFIO_MAPR_TIM3_REMAP_PARTIALREMAP);
 }
 
 /**
@@ -1179,7 +1175,7 @@ __STATIC_INLINE void LL_GPIO_AF_RemapPartial_TIM3(void)
 __STATIC_INLINE void LL_GPIO_AF_DisableRemap_TIM3(void)
 {
   CLEAR_BIT(AFIO->MAPR, AFIO_MAPR_TIM3_REMAP);
-  SET_BIT(AFIO->MAPR, AFIO_MAPR_TIM3_REMAP_NOREMAP); 
+  SET_BIT(AFIO->MAPR, AFIO_MAPR_TIM3_REMAP_NOREMAP);
 }
 
 #if defined(AFIO_MAPR_TIM4_REMAP)
@@ -1228,7 +1224,7 @@ __STATIC_INLINE uint32_t LL_GPIO_AF_IsEnabledRemap_TIM4(void)
 __STATIC_INLINE void LL_GPIO_AF_RemapPartial1_CAN1(void)
 {
   CLEAR_BIT(AFIO->MAPR, AFIO_MAPR_CAN_REMAP);
-  SET_BIT(AFIO->MAPR, AFIO_MAPR_CAN_REMAP_REMAP1); 
+  SET_BIT(AFIO->MAPR, AFIO_MAPR_CAN_REMAP_REMAP1);
 }
 
 /**
@@ -1240,7 +1236,7 @@ __STATIC_INLINE void LL_GPIO_AF_RemapPartial1_CAN1(void)
 __STATIC_INLINE void LL_GPIO_AF_RemapPartial2_CAN1(void)
 {
   CLEAR_BIT(AFIO->MAPR, AFIO_MAPR_CAN_REMAP);
-  SET_BIT(AFIO->MAPR, AFIO_MAPR_CAN_REMAP_REMAP2); 
+  SET_BIT(AFIO->MAPR, AFIO_MAPR_CAN_REMAP_REMAP2);
 }
 
 /**
@@ -1252,7 +1248,7 @@ __STATIC_INLINE void LL_GPIO_AF_RemapPartial2_CAN1(void)
 __STATIC_INLINE void LL_GPIO_AF_RemapPartial3_CAN1(void)
 {
   CLEAR_BIT(AFIO->MAPR, AFIO_MAPR_CAN_REMAP);
-  SET_BIT(AFIO->MAPR, AFIO_MAPR_CAN_REMAP_REMAP3); 
+  SET_BIT(AFIO->MAPR, AFIO_MAPR_CAN_REMAP_REMAP3);
 }
 #endif
 
@@ -1575,7 +1571,7 @@ __STATIC_INLINE uint32_t LL_GPIO_AF_IsEnabledRemap_ADC2_ETRGREG(void)
 __STATIC_INLINE void LL_GPIO_AF_EnableRemap_SWJ(void)
 {
   CLEAR_BIT(AFIO->MAPR,AFIO_MAPR_SWJ_CFG);
-  SET_BIT(AFIO->MAPR, AFIO_MAPR_SWJ_CFG_RESET);  
+  SET_BIT(AFIO->MAPR, AFIO_MAPR_SWJ_CFG_RESET);
 }
 
 /**
@@ -1611,7 +1607,7 @@ __STATIC_INLINE void LL_GPIO_AF_Remap_SWJ_NOJTAG(void)
 __STATIC_INLINE void LL_GPIO_AF_DisableRemap_SWJ(void)
 {
   CLEAR_BIT(AFIO->MAPR,AFIO_MAPR_SWJ_CFG);
-  SET_BIT(AFIO->MAPR, AFIO_MAPR_SWJ_CFG_DISABLE);  
+  SET_BIT(AFIO->MAPR, AFIO_MAPR_SWJ_CFG_DISABLE);
 }
 
 #if defined(AFIO_MAPR_SPI3_REMAP)

workspace/TS100/HAL_Driver/Inc/stm32f1xx_ll_i2c.h

@@ -2,8 +2,6 @@
   ******************************************************************************
   * @file    stm32f1xx_ll_i2c.h
   * @author  MCD Application Team
-  * @version V1.1.1
-  * @date    12-May-2017
   * @brief   Header file of I2C LL module.
   ******************************************************************************
   * @attention

workspace/TS100/HAL_Driver/Inc/stm32f1xx_ll_iwdg.h

@@ -2,8 +2,6 @@
   ******************************************************************************
   * @file    stm32f1xx_ll_iwdg.h
   * @author  MCD Application Team
-  * @version V1.1.1
-  * @date    12-May-2017
   * @brief   Header file of IWDG LL module.
   ******************************************************************************
   * @attention

workspace/TS100/HAL_Driver/Inc/stm32f1xx_ll_pwr.h

@@ -2,8 +2,6 @@
   ******************************************************************************
   * @file    stm32f1xx_ll_pwr.h
   * @author  MCD Application Team
-  * @version V1.1.1
-  * @date    12-May-2017
   * @brief   Header file of PWR LL module.
   ******************************************************************************
   * @attention

workspace/TS100/HAL_Driver/Inc/stm32f1xx_ll_rcc.h

@@ -2,8 +2,6 @@
   ******************************************************************************
   * @file    stm32f1xx_ll_rcc.h
   * @author  MCD Application Team
-  * @version V1.1.1
-  * @date    12-May-2017
   * @brief   Header file of RCC LL module.
   ******************************************************************************
   * @attention
@@ -424,8 +422,8 @@ typedef struct
 #define LL_RCC_PLLSOURCE_PLL2              (RCC_CFGR_PLLSRC | RCC_CFGR2_PREDIV1SRC << 4U) /*!< PLL2/PREDIV1 clock selected as PLL entry clock source */
 #endif /*RCC_CFGR2_PREDIV1SRC*/
 
-#define LL_RCC_PLLSOURCE_HSE_DIV_1         RCC_CFGR_PLLSRC                                /*!< HSE clock selected as PLL entry clock source */
 #if defined(RCC_CFGR2_PREDIV1)
+#define LL_RCC_PLLSOURCE_HSE_DIV_1         (RCC_CFGR_PLLSRC | RCC_CFGR2_PREDIV1_DIV1)    /*!< HSE/1 clock selected as PLL entry clock source */
 #define LL_RCC_PLLSOURCE_HSE_DIV_2         (RCC_CFGR_PLLSRC | RCC_CFGR2_PREDIV1_DIV2)    /*!< HSE/2 clock selected as PLL entry clock source */
 #define LL_RCC_PLLSOURCE_HSE_DIV_3         (RCC_CFGR_PLLSRC | RCC_CFGR2_PREDIV1_DIV3)    /*!< HSE/3 clock selected as PLL entry clock source */
 #define LL_RCC_PLLSOURCE_HSE_DIV_4         (RCC_CFGR_PLLSRC | RCC_CFGR2_PREDIV1_DIV4)    /*!< HSE/4 clock selected as PLL entry clock source */
@@ -442,6 +440,7 @@ typedef struct
 #define LL_RCC_PLLSOURCE_HSE_DIV_15        (RCC_CFGR_PLLSRC | RCC_CFGR2_PREDIV1_DIV15)   /*!< HSE/15 clock selected as PLL entry clock source */
 #define LL_RCC_PLLSOURCE_HSE_DIV_16        (RCC_CFGR_PLLSRC | RCC_CFGR2_PREDIV1_DIV16)   /*!< HSE/16 clock selected as PLL entry clock source */
 #if defined(RCC_CFGR2_PREDIV1SRC)
+#define LL_RCC_PLLSOURCE_PLL2_DIV_1        (RCC_CFGR_PLLSRC | RCC_CFGR2_PREDIV1_DIV1 | RCC_CFGR2_PREDIV1SRC << 4U)    /*!< PLL2/1 clock selected as PLL entry clock source */
 #define LL_RCC_PLLSOURCE_PLL2_DIV_2        (RCC_CFGR_PLLSRC | RCC_CFGR2_PREDIV1_DIV2 | RCC_CFGR2_PREDIV1SRC << 4U)    /*!< PLL2/2 clock selected as PLL entry clock source */
 #define LL_RCC_PLLSOURCE_PLL2_DIV_3        (RCC_CFGR_PLLSRC | RCC_CFGR2_PREDIV1_DIV3 | RCC_CFGR2_PREDIV1SRC << 4U)    /*!< PLL2/3 clock selected as PLL entry clock source */
 #define LL_RCC_PLLSOURCE_PLL2_DIV_4        (RCC_CFGR_PLLSRC | RCC_CFGR2_PREDIV1_DIV4 | RCC_CFGR2_PREDIV1SRC << 4U)    /*!< PLL2/4 clock selected as PLL entry clock source */
@@ -459,6 +458,7 @@ typedef struct
 #define LL_RCC_PLLSOURCE_PLL2_DIV_16       (RCC_CFGR_PLLSRC | RCC_CFGR2_PREDIV1_DIV16 | RCC_CFGR2_PREDIV1SRC << 4U)   /*!< PLL2/16 clock selected as PLL entry clock source */
 #endif /*RCC_CFGR2_PREDIV1SRC*/
 #else
+#define LL_RCC_PLLSOURCE_HSE_DIV_1         (RCC_CFGR_PLLSRC | 0x00000000U)               /*!< HSE/1 clock selected as PLL entry clock source */
 #define LL_RCC_PLLSOURCE_HSE_DIV_2         (RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE)         /*!< HSE/2 clock selected as PLL entry clock source */
 #endif /*RCC_CFGR2_PREDIV1*/
 /**
@@ -1451,6 +1451,7 @@ __STATIC_INLINE uint32_t LL_RCC_PLL_IsReady(void)
   *         @arg @ref LL_RCC_PLLSOURCE_HSE_DIV_14 (*)
   *         @arg @ref LL_RCC_PLLSOURCE_HSE_DIV_15 (*)
   *         @arg @ref LL_RCC_PLLSOURCE_HSE_DIV_16 (*)
+  *         @arg @ref LL_RCC_PLLSOURCE_PLL2_DIV_1 (*)
   *         @arg @ref LL_RCC_PLLSOURCE_PLL2_DIV_2 (*)
   *         @arg @ref LL_RCC_PLLSOURCE_PLL2_DIV_3 (*)
   *         @arg @ref LL_RCC_PLLSOURCE_PLL2_DIV_4 (*)
@@ -1503,6 +1504,24 @@ __STATIC_INLINE void LL_RCC_PLL_ConfigDomain_SYS(uint32_t Source, uint32_t PLLMu
 #endif /*RCC_CFGR2_PREDIV1*/
 }
 
+/**
+  * @brief  Configure PLL clock source
+  * @rmtoll CFGR      PLLSRC        LL_RCC_PLL_SetMainSource\n
+  *         CFGR2     PREDIV1SRC    LL_RCC_PLL_SetMainSource
+  * @param PLLSource This parameter can be one of the following values:
+  *         @arg @ref LL_RCC_PLLSOURCE_HSI_DIV_2
+  *         @arg @ref LL_RCC_PLLSOURCE_HSE
+  *         @arg @ref LL_RCC_PLLSOURCE_PLL2 (*)
+  * @retval None
+  */
+__STATIC_INLINE void LL_RCC_PLL_SetMainSource(uint32_t PLLSource)
+{
+#if defined(RCC_CFGR2_PREDIV1SRC)
+  MODIFY_REG(RCC->CFGR2, RCC_CFGR2_PREDIV1SRC, ((PLLSource & (RCC_CFGR2_PREDIV1SRC << 4U)) >> 4U));
+#endif /* RCC_CFGR2_PREDIV1SRC */
+  MODIFY_REG(RCC->CFGR, RCC_CFGR_PLLSRC, PLLSource);
+}
+
 /**
   * @brief  Get the oscillator used as PLL clock source.
   * @rmtoll CFGR         PLLSRC        LL_RCC_PLL_GetMainSource\n
@@ -1583,7 +1602,7 @@ __STATIC_INLINE uint32_t LL_RCC_PLL_GetPrediv(void)
 #if defined(RCC_CFGR2_PREDIV1)
   return (uint32_t)(READ_BIT(RCC->CFGR2, RCC_CFGR2_PREDIV1));
 #else
-  return (uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_PLLXTPRE));
+  return (uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_PLLXTPRE) >> RCC_CFGR_PLLXTPRE_Pos);
 #endif /*RCC_CFGR2_PREDIV1*/
 }