sv/IronOS
1
0
Fork 0
forked from me/IronOS
Code Pull Requests Activity

Drop dupe config

Browse Source
This commit is contained in:
Ben V. Brown
2020-12-28 16:11:56 +11:00
parent 627c491998
commit b23fae6f51
1 changed files with 0 additions and 124 deletions
Download Patch File Download Diff File Expand all files Collapse all files

124
workspace/TS100/Core/Inc/configuration.h
View File

@@ -1,124 +0,0 @@
#pragma once
/**
* Configuration.h
* Define here your default pre settings for TS80 or TS100
*
*/
//===========================================================================
//============================= Default Settings ============================
//===========================================================================
/**
* Default soldering temp is 320.0 C
* Temperature the iron sleeps at - default 150.0 C
*/
#define SOLDERING_TEMP 320 // Default soldering temp is 320.0 °C
#define SLEEP_TEMP 150 // Default sleep temperature
#define BOOST_TEMP 420 // Default boost temp.
#define BOOST_MODE_ENABLED 1 // 0: Disable 1: Enable
/**
* Blink the temperature on the cooling screen when its > 50C
*/
#define COOLING_TEMP_BLINK 0 // 0: Disable 1: Enable
/**
* How many seconds/minutes we wait until going to sleep/shutdown.
* Values -> SLEEP_TIME * 10; i.e. 5*10 = 50 Seconds!
*/
#define SLEEP_TIME 5 // x10 Seconds
#define SHUTDOWN_TIME 10 // Minutes
/**
* Auto start off for safety.
* Pissible values are:
* 0 - none
* 1 - Soldering Temperature
* 2 - Sleep Temperature
* 3 - Sleep Off Temperature
*/
#define AUTO_START_MODE 0 // Default to none
/**
* OLED Orientation
*
*/
#define ORIENTATION_MODE 0 // 0: Right 1:Left 2:Automatic - Default right
#define REVERSE_BUTTON_TEMP_CHANGE 0 // 0:Default 1:Reverse - Reverse the plus and minus button assigment for temperatur change
/**
* Temp change settings
*/
#define TEMP_CHANGE_SHORT_STEP 1 // Default temp change short step +1
#define TEMP_CHANGE_LONG_STEP 10 // Default temp change long step +10
#define TEMP_CHANGE_SHORT_STEP_MAX 50 // Temp change short step MAX value
#define TEMP_CHANGE_LONG_STEP_MAX 100 // Temp change long step MAX value
/* Power pulse for keeping power banks awake*/
#define POWER_PULSE_INCREMENT 1
#define POWER_PULSE_MAX 50 // x10 max watts
#ifdef MODEL_TS100
#define POWER_PULSE_DEFAULT 0
#else
#define POWER_PULSE_DEFAULT 5
#endif
/**
* OLED Orientation Sensitivity on Automatic mode!
* Motion Sensitivity <0=Off 1=Least Sensitive 9=Most Sensitive>
*/
#define SENSITIVITY 7 // Default 7
/**
* Detailed soldering screen
* Detailed idle screen (off for first time users)
*/
#define DETAILED_SOLDERING 0 // 0: Disable 1: Enable - Default 0
#define DETAILED_IDLE 0 // 0: Disable 1: Enable - Default 0
#define CUT_OUT_SETTING 0 // default to no cut-off voltage (or 18W for TS80)
#define TEMPERATURE_INF 0 // default to 0
#define DESCRIPTION_SCROLL_SPEED 0 // 0: Slow 1: Fast - default to slow
#define POWER_LIMIT_ENABLE 0 // 0: Disable 1: Enable - Default disabled power limit
#define TIP_GAIN 210 // 21 uV/C * 10, uV per deg C constant of the tip, Tip uV * 10 / coeff = tip temp
#define OP_AMP_Rf_TS100 750 * 1000 // 750 Kilo-ohms -> From schematic, R1
#define OP_AMP_Rin_TS100 2370 // 2.37 Kilo-ohms -> From schematic, R2
#define OP_AMP_GAIN_STAGE_TS100 (1 + (OP_AMP_Rf_TS100 / OP_AMP_Rin_TS100))
#define OP_AMP_Rf_TS80 180 * 1000 // 180 Kilo-ohms -> From schematic, R6
#define OP_AMP_Rin_TS80 2000 // 2.0 Kilo-ohms -> From schematic, R3
#define OP_AMP_GAIN_STAGE_TS80 (1 + (OP_AMP_Rf_TS80 / OP_AMP_Rin_TS80))
#ifdef MODEL_TS100
#define VOLTAGE_DIV 467 // 467 - Default divider from schematic
#define CALIBRATION_OFFSET 900 // 900 - Default adc offset in uV
#define PID_POWER_LIMIT 70 // Sets the max pwm power limit
#define POWER_LIMIT 30 // 30 watts default limit
#define MAX_POWER_LIMIT 65 //
#define POWER_LIMIT_STEPS 5 //
#define OP_AMP_GAIN_STAGE OP_AMP_GAIN_STAGE_TS100
#endif
#ifdef MODEL_TS80
#define VOLTAGE_DIV 780 // Default divider from schematic
#define PID_POWER_LIMIT 24 // Sets the max pwm power limit
#define CALIBRATION_OFFSET 900 // the adc offset in uV
#define POWER_LIMIT 24 // 24 watts default power limit
#define MAX_POWER_LIMIT 30 //
#define POWER_LIMIT_STEPS 2
#define OP_AMP_GAIN_STAGE OP_AMP_GAIN_STAGE_TS80
#endif
#ifdef MODEL_Pinecil
#define VOLTAGE_DIV 467 // 467 - Default divider from schematic
#define CALIBRATION_OFFSET 900 // 900 - Default adc offset in uV
#define PID_POWER_LIMIT 70 // Sets the max pwm power limit
#define POWER_LIMIT 30 // 30 watts default limit
#define MAX_POWER_LIMIT 65 //
#define POWER_LIMIT_STEPS 5 //
#define OP_AMP_GAIN_STAGE OP_AMP_GAIN_STAGE_TS100
#endif