diff --git a/workspace/TS100/Core/Inc/configuration.h b/workspace/TS100/Core/Inc/configuration.h
deleted file mode 100755
index a6ad04b1..00000000
--- a/workspace/TS100/Core/Inc/configuration.h
+++ /dev/null
@@ -1,124 +0,0 @@
-#pragma once
-/**
- * Configuration.h
- * Define here your default pre settings for TS80 or TS100
- * 
- */
-
-//===========================================================================
-//============================= Default Settings ============================
-//===========================================================================
-/**
- * Default soldering temp is 320.0 C
- * Temperature the iron sleeps at - default 150.0 C
- */
-#define SOLDERING_TEMP 320   // Default soldering temp is 320.0 °C
-#define SLEEP_TEMP 150       // Default sleep temperature
-#define BOOST_TEMP 420       // Default boost temp.
-#define BOOST_MODE_ENABLED 1 // 0: Disable 1: Enable
-
-/**
- * Blink the temperature on the cooling screen when its > 50C 
- */
-#define COOLING_TEMP_BLINK 0 // 0: Disable 1: Enable
-
-/**
- * How many seconds/minutes we wait until going to sleep/shutdown.
- * Values -> SLEEP_TIME * 10; i.e. 5*10 = 50 Seconds! 
- */
-#define SLEEP_TIME 5     // x10 Seconds
-#define SHUTDOWN_TIME 10 // Minutes
-
-/**
- * Auto start off for safety.
- * Pissible values are:  
- *  0 - none 
- *  1 - Soldering Temperature
- *  2 - Sleep Temperature 
- *  3 - Sleep Off Temperature 
- */
-#define AUTO_START_MODE 0 // Default to none
-
-/**
- * OLED Orientation
- * 
- */
-#define ORIENTATION_MODE 0           // 0: Right 1:Left 2:Automatic - Default right
-#define REVERSE_BUTTON_TEMP_CHANGE 0 // 0:Default 1:Reverse - Reverse the plus and minus button assigment for temperatur change
-
-/**
- * Temp change settings
- */
-#define TEMP_CHANGE_SHORT_STEP 1      // Default temp change short step +1
-#define TEMP_CHANGE_LONG_STEP 10      // Default temp change long step +10
-#define TEMP_CHANGE_SHORT_STEP_MAX 50 // Temp change short step MAX value
-#define TEMP_CHANGE_LONG_STEP_MAX 100 // Temp change long step MAX value
-
-/* Power pulse for keeping power banks awake*/
-#define POWER_PULSE_INCREMENT 1
-#define POWER_PULSE_MAX 50 // x10 max watts
-#ifdef MODEL_TS100
-#define POWER_PULSE_DEFAULT 0
-#else
-#define POWER_PULSE_DEFAULT 5
-#endif
-
-/**
- * OLED Orientation Sensitivity on Automatic mode!
- * Motion Sensitivity <0=Off 1=Least Sensitive 9=Most Sensitive>
- */
-#define SENSITIVITY 7 // Default 7
-
-/**
- * Detailed soldering screen
- * Detailed idle screen (off for first time users)
- */
-#define DETAILED_SOLDERING 0 // 0: Disable 1: Enable - Default 0
-#define DETAILED_IDLE 0      // 0: Disable 1: Enable - Default 0
-
-#define CUT_OUT_SETTING 0          // default to no cut-off voltage (or 18W for TS80)
-#define TEMPERATURE_INF 0          // default to 0
-#define DESCRIPTION_SCROLL_SPEED 0 // 0: Slow 1: Fast - default to slow
-#define POWER_LIMIT_ENABLE 0       // 0: Disable 1: Enable - Default disabled power limit
-
-#define TIP_GAIN 210 // 21 uV/C * 10, uV per deg C constant of the tip, Tip uV * 10 / coeff = tip temp
-
-#define OP_AMP_Rf_TS100 750 * 1000 // 750  Kilo-ohms -> From schematic, R1
-#define OP_AMP_Rin_TS100 2370      // 2.37 Kilo-ohms -> From schematic, R2
-
-#define OP_AMP_GAIN_STAGE_TS100 (1 + (OP_AMP_Rf_TS100 / OP_AMP_Rin_TS100))
-
-#define OP_AMP_Rf_TS80 180 * 1000 //  180  Kilo-ohms -> From schematic, R6
-#define OP_AMP_Rin_TS80 2000      //  2.0  Kilo-ohms -> From schematic, R3
-
-#define OP_AMP_GAIN_STAGE_TS80 (1 + (OP_AMP_Rf_TS80 / OP_AMP_Rin_TS80))
-
-#ifdef MODEL_TS100
-#define VOLTAGE_DIV 467        // 467 - Default divider from schematic
-#define CALIBRATION_OFFSET 900 // 900 - Default adc offset in uV
-#define PID_POWER_LIMIT 70     // Sets the max pwm power limit
-#define POWER_LIMIT 30         // 30 watts default limit
-#define MAX_POWER_LIMIT 65     //
-#define POWER_LIMIT_STEPS 5    //
-#define OP_AMP_GAIN_STAGE OP_AMP_GAIN_STAGE_TS100
-#endif
-
-#ifdef MODEL_TS80
-#define VOLTAGE_DIV 780        // Default divider from schematic
-#define PID_POWER_LIMIT 24     // Sets the max pwm power limit
-#define CALIBRATION_OFFSET 900 // the adc offset in uV
-#define POWER_LIMIT 24         // 24 watts default power limit
-#define MAX_POWER_LIMIT 30     //
-#define POWER_LIMIT_STEPS 2
-#define OP_AMP_GAIN_STAGE OP_AMP_GAIN_STAGE_TS80
-#endif
-
-#ifdef MODEL_Pinecil
-#define VOLTAGE_DIV 467        // 467 - Default divider from schematic
-#define CALIBRATION_OFFSET 900 // 900 - Default adc offset in uV
-#define PID_POWER_LIMIT 70     // Sets the max pwm power limit
-#define POWER_LIMIT 30         // 30 watts default limit
-#define MAX_POWER_LIMIT 65     //
-#define POWER_LIMIT_STEPS 5    //
-#define OP_AMP_GAIN_STAGE OP_AMP_GAIN_STAGE_TS100
-#endif
\ No newline at end of file