sv/IronOS
1
0
Fork 0
forked from me/IronOS
Code Pull Requests Activity

Add ability to start into sleep

Browse Source
This commit is contained in:
Ben V. Brown
2017-08-09 10:07:34 +10:00
parent 8cc7d452ce
commit 9969c66520
5 changed files with 19 additions and 10 deletions
Download Patch File Download Diff File Expand all files Collapse all files

4
workspace/ts100/inc/Settings.h
View File

@@ -12,7 +12,7 @@
#include <stdint.h>
#include "stm32f10x_flash.h"
#include "Oled.h"
#define SETTINGSVERSION 16 /*Change this if you change the struct below to prevent people getting out of sync*/
#define SETTINGSVERSION 17 /*Change this if you change the struct below to prevent people getting out of sync*/
//Display Speeds
#define DISPLAYMODE_FAST (0x00)
#define DISPLAYMODE_MEDIUM (0x01)
@@ -35,7 +35,7 @@ typedef struct {
uint8_t displayTempInF:1; //If we need to convert the C reading to F
uint8_t OrientationMode:2; //If true we want to invert the display for lefties
uint8_t sensitivity:5; //Sensitivity of accelerometer (5 bits)
uint8_t autoStart:1; //Should the unit automatically jump straight into soldering mode when power is applied
uint8_t autoStart:2; //Should the unit automatically jump straight into soldering mode when power is applied
uint8_t ShutdownTime:6; //Time until unit shuts down if left alone
uint8_t displayUpdateSpeed:2; //How fast the display updates / temp showing mode
uint8_t temperatureRounding:2; //Rounding mode for the temperature

1
workspace/ts100/inc/Strings.h
View File

@@ -19,6 +19,7 @@ extern const char* UVLOWarningString; //Fixed width 8 chars
extern const char* CoolingPromptString; //Fixed width 5 chars
extern const char SettingTrueChar;
extern const char SettingFalseChar;
extern const char SettingSleepChar;
extern const char SettingFastChar;
extern const char SettingMediumChar;
extern const char SettingSlowChar;

9
workspace/ts100/src/Main.c
View File

@@ -14,13 +14,15 @@ void setup();
int main(void) {
setup();/*Setup the system*/
if (systemSettings.autoStart)
if (systemSettings.autoStart == 1)
operatingMode = SOLDERING;
else if (systemSettings.autoStart == 2)
operatingMode = SLEEP;
while (1) {
Clear_Watchdog(); //reset the Watch dog timer
ProcessUI();
DrawUI();
OLED_Sync();//Write out the screen buffer
OLED_Sync(); //Write out the screen buffer
delayMs(15); //Slow the system down waiting for the iron.
if (systemSettings.OrientationMode == 2) {
@@ -28,8 +30,7 @@ int main(void) {
if (RotationChangedFlag) {
OLED_SetOrientation(!getOrientation());
RotationChangedFlag = 0;
}
else if (GPIO_ReadInputDataBit(GPIOB, GPIO_Pin_3) == Bit_RESET) {
} else if (GPIO_ReadInputDataBit(GPIOB, GPIO_Pin_3) == Bit_RESET) {
OLED_SetOrientation(!getOrientation());
RotationChangedFlag = 0;
//^ This is a workaround for the IRQ being set off before we have the handler setup and enabled.

7
workspace/ts100/src/Modes.c
View File

@@ -218,7 +218,8 @@ void ProcessUI() {
systemSettings.powerDisplay = !systemSettings.powerDisplay;
break;
case AUTOSTART:
systemSettings.autoStart = !systemSettings.autoStart;
systemSettings.autoStart++;
systemSettings.autoStart %=3;
break;
case COOLINGBLINK:
systemSettings.coolingTempBlink =
@@ -660,6 +661,7 @@ void DrawUI() {
case 0:
OLED_DrawChar(SettingFalseChar, 7);
break;
}
break;
case AUTOSTART:
@@ -671,6 +673,9 @@ void DrawUI() {
case 0:
OLED_DrawChar(SettingFalseChar, 7);
break;
case 2:
OLED_DrawChar(SettingSleepChar, 7);
break;
}
break;
case COOLINGBLINK:

8
workspace/ts100/src/Strings.c
View File

@@ -18,10 +18,10 @@ const char* SettingsLongNames[14] =
" Temperature Unit", " Temperature Rounding Amount",
" Temperature Display Update Rate",
" Display Orientation <A. Automatic L. Left Handed R. Right Handed>",
" Enable front key boost 450C mode when soldering",
" Temperature when in boost mode",
" Enable front key enters boost mode 450C mode when soldering",
" Temperature when in \"boost\" mode",
" Changes the arrows to a power display when soldering",
" Automatically starts the iron into soldering on power up.",
" Automatically starts the iron into soldering on power up.T=Soldering, S= Sleep mode,F=Off",
" Blink the temperature on the cooling screen while the tip is still hot." };
const char* TempCalStatus[3] = { "Cal Temp", "Cal OK ", "Cal Fail" }; //All fixed 8 chars
@@ -29,6 +29,8 @@ const char* UVLOWarningString = "Low Volt"; //Fixed width 8 chars
const char* CoolingPromptString = "Cool "; //Fixed width 5 chars
const char SettingTrueChar = 'T';
const char SettingFalseChar = 'F';
const char SettingSleepChar = 'S';
const char SettingFastChar = 'F';
const char SettingMediumChar = 'M';
const char SettingSlowChar = 'S';