sv/IronOS
1
0
Fork 0
forked from me/IronOS
Code Pull Requests Activity

Handle different calibration offset ranges for MHP30

Browse Source
This commit is contained in:
Ben V. Brown
2021-12-19 11:23:42 +11:00
parent 47929e9ee0
commit 7a654caf2a
4 changed files with 97 additions and 91 deletions
Download Patch File Download Diff File Expand all files Collapse all files

42
source/Core/BSP/MHP30/configuration.h
View File

@@ -94,8 +94,9 @@
*/
#define DETAILED_SOLDERING 0 // 0: Disable 1: Enable - Default 0
#define DETAILED_IDLE 0 // 0: Disable 1: Enable - Default 0
// Due to large thermal mass of the PCB being heated we need to pull this back a bit
#define THERMAL_RUNAWAY_TIME_SEC 30
#define THERMAL_RUNAWAY_TIME_SEC 45
#define THERMAL_RUNAWAY_TEMP_C 3
#define CUT_OUT_SETTING 0 // default to no cut-off voltage
@@ -118,25 +119,26 @@
#endif
#ifdef MODEL_MHP30
#define SOLDERING_TEMP 200 // Default soldering temp is 200.0 °C
#define VOLTAGE_DIV 360 // Default for MHP30
#define PID_POWER_LIMIT 65 // Sets the max pwm power limit
#define CALIBRATION_OFFSET 0 // the adc offset in uV - MHP compensates automagically
#define POWER_LIMIT 65 // 65 watts default power limit
#define MAX_POWER_LIMIT 65 //
#define POWER_LIMIT_STEPS 1 //
#define OP_AMP_GAIN_STAGE OP_AMP_GAIN_STAGE_MHP30 //
#define USB_PD_VMAX 20 // Maximum voltage for PD to negotiate
#define MODEL_HAS_DCDC // Has inductor to current filter
#define PID_TIM_HZ (16) //
#define MAX_TEMP_C 300 // Max soldering temp selectable °C
#define MAX_TEMP_F 570 // Max soldering temp selectable °F
#define MIN_TEMP_C 10 // Min soldering temp selectable °C
#define MIN_TEMP_F 60 // Min soldering temp selectable °F
#define MIN_BOOST_TEMP_C 150 // The min settable temp for boost mode °C
#define MIN_BOOST_TEMP_F 300 // The min settable temp for boost mode °F
#define NO_DISPLAY_ROTATE // Disable OLED rotation by accel
#define SLEW_LIMIT 50 // Limit to 3.0 Watts per 64ms pid loop update rate slew rate
#define SOLDERING_TEMP 200 // Default soldering temp is 200.0 °C
#define VOLTAGE_DIV 360 // Default for MHP30
#define PID_POWER_LIMIT 65 // Sets the max pwm power limit
#define CALIBRATION_OFFSET 0 // the adc offset in uV - MHP compensates automagically
#define MIN_CALIBRATION_OFFSET 0 // Min value for calibration
#define POWER_LIMIT 65 // 65 watts default power limit
#define MAX_POWER_LIMIT 65 //
#define POWER_LIMIT_STEPS 1 //
#define OP_AMP_GAIN_STAGE OP_AMP_GAIN_STAGE_MHP30 //
#define USB_PD_VMAX 20 // Maximum voltage for PD to negotiate
#define MODEL_HAS_DCDC // Has inductor to current filter
#define PID_TIM_HZ (16) //
#define MAX_TEMP_C 350 // Max soldering temp selectable °C
#define MAX_TEMP_F 660 // Max soldering temp selectable °F
#define MIN_TEMP_C 10 // Min soldering temp selectable °C
#define MIN_TEMP_F 60 // Min soldering temp selectable °F
#define MIN_BOOST_TEMP_C 150 // The min settable temp for boost mode °C
#define MIN_BOOST_TEMP_F 300 // The min settable temp for boost mode °F
#define NO_DISPLAY_ROTATE // Disable OLED rotation by accel
#define SLEW_LIMIT 50 // Limit to 3.0 Watts per 64ms pid loop update rate slew rate
#define ACCEL_MSA
#define POW_PD 1
#define TEMP_NTC

105
source/Core/BSP/Miniware/configuration.h
View File

@@ -125,23 +125,24 @@
#endif
#ifdef MODEL_TS100
#define SOLDERING_TEMP 320 // Default soldering temp is 320.0 °C
#define VOLTAGE_DIV 467 // 467 - Default divider from schematic
#define CALIBRATION_OFFSET 900 // 900 - Default adc offset in uV
#define PID_POWER_LIMIT 70 // Sets the max pwm power limit
#define POWER_LIMIT 0 // 0 watts default limit
#define MAX_POWER_LIMIT 70 //
#define POWER_LIMIT_STEPS 5 //
#define OP_AMP_GAIN_STAGE OP_AMP_GAIN_STAGE_TS100 //
#define TEMP_uV_LOOKUP_HAKKO //
#define USB_PD_VMAX 20 // Maximum voltage for PD to negotiate
#define PID_TIM_HZ (8) // Tick rate of the PID loop
#define MAX_TEMP_C 450 // Max soldering temp selectable °C
#define MAX_TEMP_F 850 // Max soldering temp selectable °F
#define MIN_TEMP_C 10 // Min soldering temp selectable °C
#define MIN_TEMP_F 60 // Min soldering temp selectable °F
#define MIN_BOOST_TEMP_C 250 // The min settable temp for boost mode °C
#define MIN_BOOST_TEMP_F 480 // The min settable temp for boost mode °F
#define SOLDERING_TEMP 320 // Default soldering temp is 320.0 °C
#define VOLTAGE_DIV 467 // 467 - Default divider from schematic
#define CALIBRATION_OFFSET 900 // 900 - Default adc offset in uV
#define MIN_CALIBRATION_OFFSET 100 // Min value for calibration
#define PID_POWER_LIMIT 70 // Sets the max pwm power limit
#define POWER_LIMIT 0 // 0 watts default limit
#define MAX_POWER_LIMIT 70 //
#define POWER_LIMIT_STEPS 5 //
#define OP_AMP_GAIN_STAGE OP_AMP_GAIN_STAGE_TS100 //
#define TEMP_uV_LOOKUP_HAKKO //
#define USB_PD_VMAX 20 // Maximum voltage for PD to negotiate
#define PID_TIM_HZ (8) // Tick rate of the PID loop
#define MAX_TEMP_C 450 // Max soldering temp selectable °C
#define MAX_TEMP_F 850 // Max soldering temp selectable °F
#define MIN_TEMP_C 10 // Min soldering temp selectable °C
#define MIN_TEMP_F 60 // Min soldering temp selectable °F
#define MIN_BOOST_TEMP_C 250 // The min settable temp for boost mode °C
#define MIN_BOOST_TEMP_F 480 // The min settable temp for boost mode °F
#define POW_DC
#define ACCEL_MMA
#define POW_PD 0
@@ -150,23 +151,24 @@
#endif
#ifdef MODEL_TS80
#define SOLDERING_TEMP 320 // Default soldering temp is 320.0 °C
#define VOLTAGE_DIV 780 // Default divider from schematic
#define PID_POWER_LIMIT 24 // Sets the max pwm power limit
#define CALIBRATION_OFFSET 900 // the adc offset in uV
#define POWER_LIMIT 24 // 24 watts default power limit
#define MAX_POWER_LIMIT 40 //
#define POWER_LIMIT_STEPS 2 //
#define OP_AMP_GAIN_STAGE OP_AMP_GAIN_STAGE_TS80 //
#define TEMP_uV_LOOKUP_TS80 //
#define USB_PD_VMAX 12 // Maximum voltage for PD to negotiate
#define PID_TIM_HZ (8) // Tick rate of the PID loop
#define MAX_TEMP_C 450 // Max soldering temp selectable °C
#define MAX_TEMP_F 850 // Max soldering temp selectable °F
#define MIN_TEMP_C 10 // Min soldering temp selectable °C
#define MIN_TEMP_F 60 // Min soldering temp selectable °F
#define MIN_BOOST_TEMP_C 250 // The min settable temp for boost mode °C
#define MIN_BOOST_TEMP_F 480 // The min settable temp for boost mode °F
#define SOLDERING_TEMP 320 // Default soldering temp is 320.0 °C
#define VOLTAGE_DIV 780 // Default divider from schematic
#define PID_POWER_LIMIT 24 // Sets the max pwm power limit
#define CALIBRATION_OFFSET 900 // the adc offset in uV
#define MIN_CALIBRATION_OFFSET 100 // Min value for calibration
#define POWER_LIMIT 24 // 24 watts default power limit
#define MAX_POWER_LIMIT 40 //
#define POWER_LIMIT_STEPS 2 //
#define OP_AMP_GAIN_STAGE OP_AMP_GAIN_STAGE_TS80 //
#define TEMP_uV_LOOKUP_TS80 //
#define USB_PD_VMAX 12 // Maximum voltage for PD to negotiate
#define PID_TIM_HZ (8) // Tick rate of the PID loop
#define MAX_TEMP_C 450 // Max soldering temp selectable °C
#define MAX_TEMP_F 850 // Max soldering temp selectable °F
#define MIN_TEMP_C 10 // Min soldering temp selectable °C
#define MIN_TEMP_F 60 // Min soldering temp selectable °F
#define MIN_BOOST_TEMP_C 250 // The min settable temp for boost mode °C
#define MIN_BOOST_TEMP_F 480 // The min settable temp for boost mode °F
#define ACCEL_LIS
#define POW_QC
#define POW_PD 0
@@ -176,23 +178,24 @@
#endif
#ifdef MODEL_TS80P
#define SOLDERING_TEMP 320 // Default soldering temp is 320.0 °C
#define VOLTAGE_DIV 650 // Default for TS80P with slightly different resistors
#define PID_POWER_LIMIT 35 // Sets the max pwm power limit
#define CALIBRATION_OFFSET 1500 // the adc offset in uV
#define POWER_LIMIT 30 // 30 watts default power limit
#define MAX_POWER_LIMIT 40 //
#define POWER_LIMIT_STEPS 2 //
#define OP_AMP_GAIN_STAGE OP_AMP_GAIN_STAGE_TS80 //
#define TEMP_uV_LOOKUP_TS80 //
#define USB_PD_VMAX 12 // Maximum voltage for PD to negotiate
#define PID_TIM_HZ (8) // Tick rate of the PID loop
#define MAX_TEMP_C 450 // Max soldering temp selectable °C
#define MAX_TEMP_F 850 // Max soldering temp selectable °F
#define MIN_TEMP_C 10 // Min soldering temp selectable °C
#define MIN_TEMP_F 60 // Min soldering temp selectable °F
#define MIN_BOOST_TEMP_C 250 // The min settable temp for boost mode °C
#define MIN_BOOST_TEMP_F 480 // The min settable temp for boost mode °F
#define SOLDERING_TEMP 320 // Default soldering temp is 320.0 °C
#define VOLTAGE_DIV 650 // Default for TS80P with slightly different resistors
#define PID_POWER_LIMIT 35 // Sets the max pwm power limit
#define CALIBRATION_OFFSET 1500 // the adc offset in uV
#define MIN_CALIBRATION_OFFSET 100 // Min value for calibration
#define POWER_LIMIT 30 // 30 watts default power limit
#define MAX_POWER_LIMIT 40 //
#define POWER_LIMIT_STEPS 2 //
#define OP_AMP_GAIN_STAGE OP_AMP_GAIN_STAGE_TS80 //
#define TEMP_uV_LOOKUP_TS80 //
#define USB_PD_VMAX 12 // Maximum voltage for PD to negotiate
#define PID_TIM_HZ (8) // Tick rate of the PID loop
#define MAX_TEMP_C 450 // Max soldering temp selectable °C
#define MAX_TEMP_F 850 // Max soldering temp selectable °F
#define MIN_TEMP_C 10 // Min soldering temp selectable °C
#define MIN_TEMP_F 60 // Min soldering temp selectable °F
#define MIN_BOOST_TEMP_C 250 // The min settable temp for boost mode °C
#define MIN_BOOST_TEMP_F 480 // The min settable temp for boost mode °F
#define ACCEL_LIS
#define ACCEL_MSA
#define POW_PD 1

35
source/Core/BSP/Pine64/configuration.h
View File

@@ -114,23 +114,24 @@
#endif
#ifdef MODEL_Pinecil
#define SOLDERING_TEMP 320 // Default soldering temp is 320.0 °C
#define VOLTAGE_DIV 467 // 467 - Default divider from schematic
#define CALIBRATION_OFFSET 900 // 900 - Default adc offset in uV
#define PID_POWER_LIMIT 70 // Sets the max pwm power limit
#define POWER_LIMIT 0 // 0 watts default limit
#define MAX_POWER_LIMIT 70 //
#define POWER_LIMIT_STEPS 5 //
#define OP_AMP_GAIN_STAGE OP_AMP_GAIN_STAGE_PINECIL // Uses TS100 resistors
#define TEMP_uV_LOOKUP_HAKKO // Use Hakko lookup table
#define USB_PD_VMAX 20 // Maximum voltage for PD to negotiate
#define PID_TIM_HZ (8) // Tick rate of the PID loop
#define MAX_TEMP_C 450 // Max soldering temp selectable °C
#define MAX_TEMP_F 850 // Max soldering temp selectable °F
#define MIN_TEMP_C 10 // Min soldering temp selectable °C
#define MIN_TEMP_F 60 // Min soldering temp selectable °F
#define MIN_BOOST_TEMP_C 250 // The min settable temp for boost mode °C
#define MIN_BOOST_TEMP_F 480 // The min settable temp for boost mode °F
#define SOLDERING_TEMP 320 // Default soldering temp is 320.0 °C
#define VOLTAGE_DIV 467 // 467 - Default divider from schematic
#define CALIBRATION_OFFSET 900 // 900 - Default adc offset in uV
#define MIN_CALIBRATION_OFFSET 100 // Min value for calibration
#define PID_POWER_LIMIT 70 // Sets the max pwm power limit
#define POWER_LIMIT 0 // 0 watts default limit
#define MAX_POWER_LIMIT 70 //
#define POWER_LIMIT_STEPS 5 //
#define OP_AMP_GAIN_STAGE OP_AMP_GAIN_STAGE_PINECIL // Uses TS100 resistors
#define TEMP_uV_LOOKUP_HAKKO // Use Hakko lookup table
#define USB_PD_VMAX 20 // Maximum voltage for PD to negotiate
#define PID_TIM_HZ (8) // Tick rate of the PID loop
#define MAX_TEMP_C 450 // Max soldering temp selectable °C
#define MAX_TEMP_F 850 // Max soldering temp selectable °F
#define MIN_TEMP_C 10 // Min soldering temp selectable °C
#define MIN_TEMP_F 60 // Min soldering temp selectable °F
#define MIN_BOOST_TEMP_C 250 // The min settable temp for boost mode °C
#define MIN_BOOST_TEMP_F 480 // The min settable temp for boost mode °F
#define POW_PD 1
#define POW_QC 1

6
source/Core/Src/Settings.cpp
View File

@@ -72,7 +72,7 @@ static const SettingConstants settingsConstants[(int)SettingsOptions::SettingsOp
{1, POWER_PULSE_DURATION_MAX, 1, POWER_PULSE_DURATION_DEFAULT}, // KeepAwakePulseDuration
{360, 900, 1, VOLTAGE_DIV}, // VoltageDiv
{MIN_TEMP_C, MAX_TEMP_F, 10, BOOST_TEMP}, // BoostTemp
{100, 2500, 1, CALIBRATION_OFFSET}, // CalibrationOffset
{MIN_CALIBRATION_OFFSET, 2500, 1, CALIBRATION_OFFSET}, // CalibrationOffset
{0, MAX_POWER_LIMIT, POWER_LIMIT_STEPS, POWER_LIMIT}, // PowerLimit
{0, 1, 1, REVERSE_BUTTON_TEMP_CHANGE}, // ReverseButtonTempChangeEnabled
{5, TEMP_CHANGE_LONG_STEP_MAX, 5, TEMP_CHANGE_LONG_STEP}, // TempChangeLongStep
@@ -104,6 +104,7 @@ bool sanitiseSettings() {
if (systemSettings.versionMarker != 0x55AA) {
memset((void *)&systemSettings, 0xFF, sizeof(systemSettings));
systemSettings.versionMarker = 0x55AA;
dirty = true;
}
if (systemSettings.padding != 0xFFFFFFFF) {
systemSettings.padding = 0xFFFFFFFF; // Force padding to 0xFFFFFFFF so that rolling forwards / back should be easier
@@ -120,8 +121,7 @@ bool sanitiseSettings() {
// Check min max for all settings, if outside the range, move to default
if (systemSettings.settingsValues[i] < settingsConstants[i].min || systemSettings.settingsValues[i] > settingsConstants[i].max) {
systemSettings.settingsValues[i] = settingsConstants[i].defaultValue;
dirty = true;
dirty = true;
}
}
if (dirty) {