Merge pull request #974 from discip/master

languages (certain unifying)

Translations/translation_BG.json

@@ -27,10 +27,7 @@
 		"YourGainMessage": "Усилване:"
 	},
 	"messagesWarn": {
-		"ResetOKMessage": [
-			"Нулиране",
-			"завършено"
-		],
+		"ResetOKMessage": "Нулиране",
 		"SettingsResetMessage": [
 			"Настройките бяха",
 			"нулирани!"
@@ -51,13 +48,14 @@
 		"SettingRightChar": "R",
 		"SettingLeftChar": "L",
 		"SettingAutoChar": "A",
-		"SettingFastChar": "F",
+		"SettingOffChar": "O",
 		"SettingSlowChar": "S",
 		"SettingMediumChar": "M",
-		"SettingOffChar": "O",
-		"SettingStartSolderingChar": "T",
-		"SettingStartSleepChar": "S",
-		"SettingStartSleepOffChar": "O",
+		"SettingFastChar": "F",
+		"SettingStartNoneChar": "И",
+		"SettingStartSolderingChar": "Р",
+		"SettingStartSleepChar": "С",
+		"SettingStartSleepOffChar": "П",
 		"SettingStartNoneChar": "F",
 		"SettingSensitivityOff": "O",
 		"SettingSensitivityLow": "L",
@@ -111,42 +109,42 @@
 				"Източник",
 				"захранване"
 			],
-			"desc": "Източник на захранване. Минимално напрежение. <DC 10V> <S 3.3V за клетка>"
+			"desc": "Източник на захранване. Минимално напрежение. (DC 10V) (S 3,3V за клетка)"
 		},
 		"SleepTemperature": {
 			"text2": [
 				"Темп.",
 				"сън"
 			],
-			"desc": "Температура при режим \"сън\" <C>"
+			"desc": "Температура при режим \"сън\" (C)"
 		},
 		"SleepTimeout": {
 			"text2": [
 				"Време",
 				"сън"
 			],
-			"desc": "Включване в режим \"сън\" след: <Минути/Секунди>"
+			"desc": "Включване в режим \"сън\" след: (Минути | Секунди)"
 		},
 		"ShutdownTimeout": {
 			"text2": [
 				"Време",
 				"изкл."
 			],
-			"desc": "Изключване след <Минути>"
+			"desc": "Изключване след (Минути)"
 		},
 		"MotionSensitivity": {
 			"text2": [
 				"Усещане",
 				"за движение"
 			],
-			"desc": "Усещане за движение <0.Изключено 1.Слабо 9.Силно>"
+			"desc": "Усещане за движение (0=Изключено | 1=Слабо | ... | 9=Силно)"
 		},
 		"TemperatureUnit": {
 			"text2": [
 				"Единици за",
 				"температура"
 			],
-			"desc": "Единици за температура <C=Целзии F=Фаренхайт>"
+			"desc": "Единици за температура (C=Целзии | F=Фаренхайт)"
 		},
 		"AdvancedIdle": {
 			"text2": [
@@ -160,7 +158,7 @@
 				"Ориентация",
 				"на дисплея"
 			],
-			"desc": "Ориентация на дисплея <A. Автоматично L. Лява Ръка R. Дясна Ръка>"
+			"desc": "Ориентация на дисплея (R=Дясна Ръка | L=Лява Ръка | A=Автоматично)"
 		},
 		"BoostTemperature": {
 			"text2": [
@@ -174,7 +172,7 @@
 				"Автоматичен",
 				"работен режим"
 			],
-			"desc": "Режим на поялника при включване на захранването. T=Работен, S=Сън, F=Изключен"
+			"desc": "Режим на поялника при включване на захранването. (И=Изключен | Р=Работен | С=Сън | П=Сън температура помещение)"
 		},
 		"CooldownBlink": {
 			"text2": [
@@ -230,7 +228,7 @@
 				"Лимит на",
 				"мощност"
 			],
-			"desc": "Максимална мощност на поялника <W>"
+			"desc": "Максимална мощност на поялника (Watt)"
 		},
 		"ReverseButtonTempChange": {
 			"text2": [
@@ -265,21 +263,21 @@
 				"Hall Eff",
 				"Sensitivity"
 			],
-			"desc": "Sensitivity of the Hall effect sensor in detecting sleep <O=Off,L=Low,M=Medium,H=High>"
+			"desc": "Sensitivity of the Hall effect sensor in detecting sleep (O=Off | L=Low | M=Medium | H=High)"
 		},
 		"LockingMode": {
 			"text2": [
 				"Allow buttons",
 				"locking"
 			],
-			"desc": "When soldering, long press on both buttons lock them <D=Disable, B=Boost only, F=Full locking>"
+			"desc": "When soldering, long press on both buttons lock them (D=Disable | B=Boost only | F=Full locking)"
 		},
 		"MinVolCell": {
 			"text2": [
 				"Minimum",
 				"voltage"
 			],
-			"desc": "Minimum allowed voltage per cell <Volts> <3S: 3.0V - 3.7V, 4/5/6S: 2.4V - 3.7V>"
+			"desc": "Minimum allowed voltage per cell (3S: 3 - 3,7V | 4-6S: 2,4 - 3,7V)"
 		},
 		"AnimLoop": {
 			"text2": [
@@ -293,25 +291,25 @@
 				"Anim.",
 				"speed"
 			],
-			"desc": "Speed of icon animations in menu <O=off | L=low | M=medium | H=high>"
+			"desc": "Speed of icon animations in menu (O=off | L=low | M=medium | H=high)"
 		},
 		"PowerPulseWait": {
 			"text2": [
 				"Power pulse",
 				"wait time"
 			],
-			"desc": "Time to wait before triggering every keep-awake pulse (x 2.5s)"
+			"desc": "Time to wait before triggering every keep-awake pulse (x 2,5с)"
 		},
 		"PowerPulseDuration": {
 			"text2": [
 				"Power pulse",
 				"duration"
 			],
-			"desc": "Keep-awake-pulse duration (x 250ms)"
+			"desc": "Keep-awake-pulse duration (x 250мс)"
 		},
 		"LanguageSwitch": {
 			"text2": [
-				"Language:",
+				"Език:",
 				" BG   Български"
 			],
 			"desc": ""

Translations/translation_CS.json

@@ -48,14 +48,14 @@
 		"SettingRightChar": "P",
 		"SettingLeftChar": "L",
 		"SettingAutoChar": "A",
-		"SettingFastChar": "R",
+		"SettingOffChar": "O",
 		"SettingSlowChar": "P",
 		"SettingMediumChar": "M",
-		"SettingOffChar": "O",
-		"SettingStartSolderingChar": "T",
+		"SettingFastChar": "R",
+		"SettingStartNoneChar": "O",
+		"SettingStartSolderingChar": "P",
 		"SettingStartSleepChar": "S",
-		"SettingStartSleepOffChar": "O",
-		"SettingStartNoneChar": "F",
+		"SettingStartSleepOffChar": "M",
 		"SettingSensitivityOff": "O",
 		"SettingSensitivityLow": "L",
 		"SettingSensitivityMedium": "M",
@@ -108,7 +108,7 @@
 				"Zdroj",
 				"napájení"
 			],
-			"desc": "Při nižším napětí ukončí pájení <DC=10V, ?S=?x3.3V pro LiPo, LiIon...>."
+			"desc": "Při nižším napětí ukončí pájení (DC=10V | ?S=?x3,3V pro LiPo, LiIon...)."
 		},
 		"SleepTemperature": {
 			"text2": [
@@ -122,28 +122,28 @@
 				"Čas do",
 				"r. spánku"
 			],
-			"desc": "Čas do režimu spánku <Minut/Sekund>."
+			"desc": "Čas do režimu spánku (Minut | Sekund)."
 		},
 		"ShutdownTimeout": {
 			"text2": [
 				"Čas do",
 				"vypnutí"
 			],
-			"desc": "Čas do automatického vypnutí <Minut>."
+			"desc": "Čas do automatického vypnutí (Minut)."
 		},
 		"MotionSensitivity": {
 			"text2": [
 				"Citlivost",
 				"det. pohybu"
 			],
-			"desc": "Citlivost detekce pohybu <0=Vyp, 1=Min, ... 9=Max>."
+			"desc": "Citlivost detekce pohybu (0=Vyp | 1=Min | ... | 9=Max)."
 		},
 		"TemperatureUnit": {
 			"text2": [
 				"Jednotky",
 				"teploty"
 			],
-			"desc": "Jednotky měření teploty <C=Celsius, F=Fahrenheit>."
+			"desc": "Jednotky měření teploty (C=Celsius | F=Fahrenheit)."
 		},
 		"AdvancedIdle": {
 			"text2": [
@@ -157,7 +157,7 @@
 				"Orientace",
 				"obrazovky"
 			],
-			"desc": "Orientace obrazovky <A=Auto, L=Levák, P=Pravák>."
+			"desc": "Orientace obrazovky (P=Pravák | L=Levák | A=Auto)."
 		},
 		"BoostTemperature": {
 			"text2": [
@@ -171,7 +171,7 @@
 				"Automatický",
 				"start"
 			],
-			"desc": "Při startu ihned nahřát hrot?"
+			"desc": "Při startu ihned nahřát hrot? (O=Pryč | P=Pájení | S=Spát | M=Spát teplota místnosti)"
 		},
 		"CooldownBlink": {
 			"text2": [
@@ -213,7 +213,7 @@
 				"Rychlost",
 				"popisků"
 			],
-			"desc": "Rychlost posuvu popisků podobných tomuto <P=Pomalu, R=Rychle>"
+			"desc": "Rychlost posuvu popisků podobných tomuto (P=Pomalu | R=Rychle)"
 		},
 		"QCMaxVoltage": {
 			"text2": [
@@ -227,7 +227,7 @@
 				"Omezení",
 				"Výkonu"
 			],
-			"desc": "Maximální příkon <Watty>"
+			"desc": "Maximální příkon (Watty)"
 		},
 		"ReverseButtonTempChange": {
 			"text2": [
@@ -262,21 +262,21 @@
 				"Hall Eff",
 				"Sensitivity"
 			],
-			"desc": "Sensitivity of the Hall effect sensor in detecting sleep <O=Off,L=Low,M=Medium,H=High>"
+			"desc": "Sensitivity of the Hall effect sensor in detecting sleep (O=Off | L=Low | M=Medium | H=High)"
 		},
 		"LockingMode": {
 			"text2": [
 				"Allow buttons",
 				"locking"
 			],
-			"desc": "When soldering, long press on both buttons lock them <D=Disable, B=Boost only, F=Full locking>"
+			"desc": "When soldering, long press on both buttons lock them (D=Disable | B=Boost only | F=Full locking)"
 		},
 		"MinVolCell": {
 			"text2": [
 				"Minimum",
 				"voltage"
 			],
-			"desc": "Minimum allowed voltage per cell <Volts> <3S: 3.0V - 3.7V, 4/5/6S: 2.4V - 3.7V>"
+			"desc": "Minimum allowed voltage per cell (3S: 3 - 3,7V | 4-6S: 2,4 - 3,7V)"
 		},
 		"AnimLoop": {
 			"text2": [
@@ -290,14 +290,14 @@
 				"Anim.",
 				"speed"
 			],
-			"desc": "Speed of icon animations in menu <O=off | L=low | M=medium | H=high>"
+			"desc": "Speed of icon animations in menu (O=off | L=low | M=medium | H=high)"
 		},
 		"PowerPulseWait": {
 			"text2": [
 				"Power pulse",
 				"wait time"
 			],
-			"desc": "Time to wait before triggering every keep-awake pulse (x 2.5s)"
+			"desc": "Time to wait before triggering every keep-awake pulse (x 2,5s)"
 		},
 		"PowerPulseDuration": {
 			"text2": [
@@ -308,7 +308,7 @@
 		},
 		"LanguageSwitch": {
 			"text2": [
-				"Language:",
+				"Řeč:",
 				" CS       Český"
 			],
 			"desc": ""

Translations/translation_DA.json

@@ -48,14 +48,14 @@
 		"SettingRightChar": "H",
 		"SettingLeftChar": "V",
 		"SettingAutoChar": "A",
-		"SettingFastChar": "F",
+		"SettingOffChar": "O",
 		"SettingSlowChar": "S",
 		"SettingMediumChar": "M",
-		"SettingOffChar": "O",
+		"SettingFastChar": "F",
+		"SettingStartNoneChar": "S",
 		"SettingStartSolderingChar": "L",
 		"SettingStartSleepChar": "D",
-		"SettingStartSleepOffChar": "O",
-		"SettingStartNoneChar": "S",
+		"SettingStartSleepOffChar": "R",
 		"SettingSensitivityOff": "O",
 		"SettingSensitivityLow": "L",
 		"SettingSensitivityMedium": "M",
@@ -108,42 +108,42 @@
 				"Power",
 				"source"
 			],
-			"desc": "Strømforsyning. Indstil Cutoff Spændingen. <DC 10V <S 3.3V per cell"
+			"desc": "Strømforsyning. Indstil Cutoff Spændingen. (DC 10V) (S 3,3V per cell)"
 		},
 		"SleepTemperature": {
 			"text2": [
 				"Sleep",
 				"temp"
 			],
-			"desc": "Dvale Temperatur <C>"
+			"desc": "Dvale Temperatur (C)"
 		},
 		"SleepTimeout": {
 			"text2": [
 				"Sleep",
 				"timeout"
 			],
-			"desc": "Dvale Timeout <Minutter/Sekunder"
+			"desc": "Dvale Timeout (Minutter | Sekunder)"
 		},
 		"ShutdownTimeout": {
 			"text2": [
 				"Shutdown",
 				"timeout"
 			],
-			"desc": "sluknings Timeout <Minutter"
+			"desc": "sluknings Timeout (Minutter)"
 		},
 		"MotionSensitivity": {
 			"text2": [
 				"Motion",
 				"sensitivity"
 			],
-			"desc": "Bevægelsesfølsomhed <0.Slukket 1.Mindst følsom 9.Mest følsom"
+			"desc": "Bevægelsesfølsomhed (0=Slukket | 1=Mindst følsom | ... | 9=Mest følsom)"
 		},
 		"TemperatureUnit": {
 			"text2": [
 				"Temperature",
 				"unit"
 			],
-			"desc": "Temperatur Enhed <C=Celsius F=Fahrenheit"
+			"desc": "Temperatur Enhed (C=Celsius | F=Fahrenheit)"
 		},
 		"AdvancedIdle": {
 			"text2": [
@@ -157,7 +157,7 @@
 				"Display",
 				"orientation"
 			],
-			"desc": "Skærm Orientering <A. Automatisk V. Venstre Håndet H. Højre Håndet"
+			"desc": "Skærm Orientering (H=Højre Håndet | V=Venstre Håndet | A=Automatisk)"
 		},
 		"BoostTemperature": {
 			"text2": [
@@ -171,7 +171,7 @@
 				"Auto",
 				"start"
 			],
-			"desc": "Start automatisk med lodning når strøm sættes til. L=Lodning, D= Dvale tilstand,S=Slukket"
+			"desc": "Start automatisk med lodning når strøm sættes til. (S=Slukket | L=Lodning | D=Dvale tilstand | R=Dvale tilstand rumtemperatur)"
 		},
 		"CooldownBlink": {
 			"text2": [
@@ -227,7 +227,7 @@
 				"Power",
 				"Limit"
 			],
-			"desc": "Maximum power the iron can use <Watts>"
+			"desc": "Maximum power the iron can use (Watts)"
 		},
 		"ReverseButtonTempChange": {
 			"text2": [
@@ -262,21 +262,21 @@
 				"Hall Eff",
 				"Sensitivity"
 			],
-			"desc": "Sensitivity of the Hall effect sensor in detecting sleep <O=Off,L=Low,M=Medium,H=High>"
+			"desc": "Sensitivity of the Hall effect sensor in detecting sleep (O=Off | L=Low | M=Medium | H=High)"
 		},
 		"LockingMode": {
 			"text2": [
 				"Allow buttons",
 				"locking"
 			],
-			"desc": "When soldering, long press on both buttons lock them <D=Disable, B=Boost only, F=Full locking>"
+			"desc": "When soldering, long press on both buttons lock them (D=Disable | B=Boost only | F=Full locking)"
 		},
 		"MinVolCell": {
 			"text2": [
 				"Minimum",
 				"voltage"
 			],
-			"desc": "Minimum allowed voltage per cell <Volts> <3S: 3.0V - 3.7V, 4/5/6S: 2.4V - 3.7V>"
+			"desc": "Minimum allowed voltage per cell (3S: 3 - 3,7V | 4-6S: 2,4 - 3,7V)"
 		},
 		"AnimLoop": {
 			"text2": [
@@ -290,14 +290,14 @@
 				"Anim.",
 				"speed"
 			],
-			"desc": "Speed of icon animations in menu <O=off | L=low | M=medium | H=high>"
+			"desc": "Speed of icon animations in menu (O=off | L=low | M=medium | H=high)"
 		},
 		"PowerPulseWait": {
 			"text2": [
 				"Power pulse",
 				"wait time"
 			],
-			"desc": "Time to wait before triggering every keep-awake pulse (x 2.5s)"
+			"desc": "Time to wait before triggering every keep-awake pulse (x 2,5s)"
 		},
 		"PowerPulseDuration": {
 			"text2": [
@@ -308,7 +308,7 @@
 		},
 		"LanguageSwitch": {
 			"text2": [
-				"Language:",
+				"Sprog :",
 				" DA       Dansk"
 			],
 			"desc": ""

Translations/translation_DE.json

@@ -49,14 +49,14 @@
 		"SettingRightChar": "R",
 		"SettingLeftChar": "L",
 		"SettingAutoChar": "A",
-		"SettingFastChar": "S",
+		"SettingOffChar": "A",
 		"SettingSlowChar": "L",
 		"SettingMediumChar": "M",
-		"SettingOffChar": "A",
+		"SettingFastChar": "S",
+		"SettingStartNoneChar": "A",
 		"SettingStartSolderingChar": "L",
 		"SettingStartSleepChar": "R",
 		"SettingStartSleepOffChar": "K",
-		"SettingStartNoneChar": "A",
 		"SettingSensitivityOff": "A",
 		"SettingSensitivityLow": "N",
 		"SettingSensitivityMedium": "M",
@@ -109,7 +109,7 @@
 				"Spannungs-",
 				"quelle"
 			],
-			"desc": "Spannungsquelle (Abschaltspannung) (DC=10V, nS=n*3.3V für n LiIon-Zellen)"
+			"desc": "Spannungsquelle (Abschaltspannung) (DC=10V | nS=n*3.3V für n LiIon-Zellen)"
 		},
 		"SleepTemperature": {
 			"text2": [
@@ -158,7 +158,7 @@
 				"Anzeige-",
 				"ausrichtung"
 			],
-			"desc": "A=automatisch | L=linkshändig | R=rechtshändig"
+			"desc": "R=rechtshändig | L=linkshändig | A=automatisch"
 		},
 		"BoostTemperature": {
 			"text2": [

Translations/translation_EN.json

@@ -48,14 +48,14 @@
 		"SettingRightChar": "R",
 		"SettingLeftChar": "L",
 		"SettingAutoChar": "A",
-		"SettingFastChar": "F",
+		"SettingOffChar": "O",
 		"SettingSlowChar": "S",
 		"SettingMediumChar": "M",
-		"SettingOffChar": "O",
+		"SettingFastChar": "F",
+		"SettingStartNoneChar": "O",
 		"SettingStartSolderingChar": "S",
 		"SettingStartSleepChar": "Z",
 		"SettingStartSleepOffChar": "R",
-		"SettingStartNoneChar": "O",
 		"SettingSensitivityOff": "O",
 		"SettingSensitivityLow": "L",
 		"SettingSensitivityMedium": "M",
@@ -157,7 +157,7 @@
 				"Display",
 				"orientation"
 			],
-			"desc": "A=automatic | L=left-handed | R=right-handed"
+			"desc": "R=right-handed | L=left-handed | A=automatic"
 		},
 		"BoostTemperature": {
 			"text2": [

Translations/translation_ES.json

@@ -49,14 +49,14 @@
 		"SettingRightChar": "D",
 		"SettingLeftChar": "I",
 		"SettingAutoChar": "A",
-		"SettingFastChar": "R",
+		"SettingOffChar": "O",
 		"SettingSlowChar": "L",
 		"SettingMediumChar": "M",
-		"SettingOffChar": "O",
+		"SettingFastChar": "R",
+		"SettingStartNoneChar": "N",
 		"SettingStartSolderingChar": "S",
 		"SettingStartSleepChar": "R",
 		"SettingStartSleepOffChar": "F",
-		"SettingStartNoneChar": "N",
 		"SettingSensitivityOff": "O",
 		"SettingSensitivityLow": "L",
 		"SettingSensitivityMedium": "M",
@@ -109,7 +109,7 @@
 				"Fuente",
 				"de energía"
 			],
-			"desc": "Elige el tipo de fuente para limitar el voltaje <DC 10V> <S 3,3V por pila, ilimitado>"
+			"desc": "Elige el tipo de fuente para limitar el voltaje (DC 10V) (S 3,3V por pila, ilimitado)"
 		},
 		"SleepTemperature": {
 			"text2": [
@@ -123,28 +123,28 @@
 				"Entrar",
 				"en reposo"
 			],
-			"desc": "Tiempo de inactividad para entrar en reposo <min/seg>"
+			"desc": "Tiempo de inactividad para entrar en reposo (min | seg)"
 		},
 		"ShutdownTimeout": {
 			"text2": [
 				"Tiempo de",
 				"apagado"
 			],
-			"desc": "Tiempo de inactividad para apagarse <en minutos>"
+			"desc": "Tiempo de inactividad para apagarse (en minutos)"
 		},
 		"MotionSensitivity": {
 			"text2": [
 				"Detección de",
 				"movimiento"
 			],
-			"desc": "Tiempo de reacción al agarrar <0=no 1=menos sensible 9=más sensible>"
+			"desc": "Tiempo de reacción al agarrar (0=no | 1=menos sensible | ... | 9=más sensible)"
 		},
 		"TemperatureUnit": {
 			"text2": [
 				"Unidad de",
 				"temperatura"
 			],
-			"desc": "Unidad de temperatura <C=centígrados F=Fahrenheit>"
+			"desc": "Unidad de temperatura (C=centígrados | F=Fahrenheit)"
 		},
 		"AdvancedIdle": {
 			"text2": [
@@ -158,7 +158,7 @@
 				"Orientación",
 				"de pantalla"
 			],
-			"desc": "Orientación de la pantalla <A=automático I=zurdo D=diestro>"
+			"desc": "Orientación de la pantalla (D=diestro | I=zurdo | A=automático)"
 		},
 		"BoostTemperature": {
 			"text2": [
@@ -172,7 +172,7 @@
 				"Calentar",
 				"al enchufar"
 			],
-			"desc": "Se calienta él solo al arrancar <S=entrar en modo soldar R=solo entrar en reposo F=en reposo pero mantiene la punta fría N=no>"
+			"desc": "Se calienta él solo al arrancar (N=no | S=entrar en modo soldar | R=solo entrar en reposo | F=en reposo pero mantiene la punta fría)"
 		},
 		"CooldownBlink": {
 			"text2": [
@@ -214,7 +214,7 @@
 				"Velocidad",
 				"del texto"
 			],
-			"desc": "Velocidad de desplazamiento del texto <R=rápida L=lenta>"
+			"desc": "Velocidad de desplazamiento del texto (R=rápida | L=lenta)"
 		},
 		"QCMaxVoltage": {
 			"text2": [
@@ -228,7 +228,7 @@
 				"Ajustar la",
 				"potenc. máx."
 			],
-			"desc": "Elige el límite de potencia máxima del soldador <en vatios>"
+			"desc": "Elige el límite de potencia máxima del soldador (en vatios)"
 		},
 		"ReverseButtonTempChange": {
 			"text2": [
@@ -263,21 +263,21 @@
 				"Hall Eff",
 				"Sensibilidad"
 			],
-			"desc": "Sensibilidad del sensor de efecto Hall en la detección de reposo <O=Off,L=Low,M=Medium,H=High>"
+			"desc": "Sensibilidad del sensor de efecto Hall en la detección de reposo (O=Off | L=Low | M=Medium | H=High)"
 		},
 		"LockingMode": {
 			"text2": [
 				"Permitir botones",
 				"bloqueo"
 			],
-			"desc": "Al soldar, una pulsación larga en ambos botones los bloquea <D=desactivar, B=sólo potenciar, F=bloqueo total>."
+			"desc": "Al soldar, una pulsación larga en ambos botones los bloquea (D=desactivar | B=sólo potenciar | F=bloqueo total)."
 		},
 		"MinVolCell": {
 			"text2": [
 				"Mínimo",
 				"voltaje"
 			],
-			"desc": "voltaje mínimo permitido por célula <Voltios> <3S: 3,0V - 3,7V, 4/5/6S: 2,4V - 3,7V>"
+			"desc": "voltaje mínimo permitido por célula (3S: 3 - 3,7V | 4-6S: 2,4 - 3,7V)"
 		},
 		"AnimLoop": {
 			"text2": [
@@ -291,7 +291,7 @@
 				"Anim.",
 				"velocidad"
 			],
-			"desc": "Velocidad de las animaciones de los iconos en el menú <O=off | L=low | M=medium | H=high>"
+			"desc": "Velocidad de las animaciones de los iconos en el menú (O=off | L=low | M=medium | H=high)"
 		},
 		"PowerPulseWait": {
 			"text2": [

Translations/translation_FI.json

@@ -6,13 +6,18 @@
 		"latin_extended"
 	],
 	"messages": {
+		"SettingsCalibrationDone": "Kalibrointi tehty!",
 		"SettingsCalibrationWarning": "Varmista että kärki on huoneenlämpöinen ennen jatkamista!",
 		"SettingsResetWarning": "Haluatko varmasti palauttaa oletusarvot?",
 		"UVLOWarningString": "DC ALH.",
 		"UndervoltageString": "Alijännite",
 		"InputVoltageString": "Jännite: ",
+		"WarningTipTempString": "Kärjet lämpö: ",
+		"BadTipString": "PAHA KÄRJET",
 		"SleepingSimpleString": "Zzzz",
 		"SleepingAdvancedString": "Lepotila...",
+		"WarningSimpleString": "KUUMA!",
+		"WarningAdvancedString": "!!! KUUMA KÄRJET !!!",
 		"SleepingTipAdvancedString": "Kärki:",
 		"IdleTipString": "Pää:",
 		"IdleSetString": "Aseta:",
@@ -21,10 +26,7 @@
 		"OffString": "Off"
 	},
 	"messagesWarn": {
-		"ResetOKMessage": [
-			"Palautus",
-			"onnistui"
-		],
+		"ResetOKMessage": "Palautus",
 		"SettingsResetMessage": [
 			"Asetukset",
 			"palautettu!"
@@ -45,14 +47,14 @@
 		"SettingRightChar": "O",
 		"SettingLeftChar": "V",
 		"SettingAutoChar": "A",
-		"SettingFastChar": "N",
+		"SettingOffChar": "P",
 		"SettingSlowChar": "H",
 		"SettingMediumChar": "M",
-		"SettingOffChar": "P",
-		"SettingStartSolderingChar": "K",
-		"SettingStartSleepChar": "L",
-		"SettingStartSleepOffChar": "N",
+		"SettingFastChar": "N",
 		"SettingStartNoneChar": "E",
+		"SettingStartSolderingChar": "J",
+		"SettingStartSleepChar": "L",
+		"SettingStartSleepOffChar": "H",
 		"SettingSensitivityOff": "P",
 		"SettingSensitivityLow": "A",
 		"SettingSensitivityMedium": "K",
@@ -105,7 +107,7 @@
 				"Virtalähde",
 				"DC"
 			],
-			"desc": "Virtalähde. Asettaa katkaisujännitteen. <DC 10V> <S 3.3V per kenno, poistaa virtarajoitukset>"
+			"desc": "Virtalähde. Asettaa katkaisujännitteen. (DC 10V) (S 3.3V per kenno, poistaa virtarajoitukset)"
 		},
 		"SleepTemperature": {
 			"text2": [
@@ -119,14 +121,14 @@
 				"Lepotilan",
 				"viive"
 			],
-			"desc": "\"Lepotilan\" ajastus <S=sekuntia | M=minuuttia>"
+			"desc": "\"Lepotilan\" ajastus (S=sekuntia | M=minuuttia)"
 		},
 		"ShutdownTimeout": {
 			"text2": [
 				"Sammutus",
 				"viive"
 			],
-			"desc": "Automaattisen sammutuksen ajastus <M=minuuttia>"
+			"desc": "Automaattisen sammutuksen ajastus (M=minuuttia)"
 		},
 		"MotionSensitivity": {
 			"text2": [
@@ -140,7 +142,7 @@
 				"Lämpötilan",
 				"yksikkö"
 			],
-			"desc": "<C=celsius, F=fahrenheit>"
+			"desc": "C=celsius, F=fahrenheit"
 		},
 		"AdvancedIdle": {
 			"text2": [
@@ -154,7 +156,7 @@
 				"Näytön",
 				"kierto"
 			],
-			"desc": "A=automaattinen | V=vasenkätinen | O=oikeakätinen"
+			"desc": "O=oikeakätinen | V=vasenkätinen | A=automaattinen"
 		},
 		"BoostTemperature": {
 			"text2": [
@@ -168,7 +170,7 @@
 				"Autom.",
 				"käynnistys"
 			],
-			"desc": "Käynnistää virrat kytkettäessä juotostilan automaattisesti. T=juotostila, S=Lepotila, F=Ei käytössä"
+			"desc": "Käynnistää virrat kytkettäessä juotostilan automaattisesti. (E=Ei käytössä | J=juotostila | L=Lepotila | H=Lepotila huoneenlämpö)"
 		},
 		"CooldownBlink": {
 			"text2": [
@@ -196,7 +198,7 @@
 				"Kalibroi",
 				"tulojännite?"
 			],
-			"desc": "Tulojännitten kalibrointi (VIN) <paina pitkään poistuaksesi>"
+			"desc": "Tulojännitten kalibrointi (VIN) (paina pitkään poistuaksesi)"
 		},
 		"AdvancedSoldering": {
 			"text2": [
@@ -210,7 +212,7 @@
 				"Selityksien",
 				"nopeus"
 			],
-			"desc": "Selityksien vieritysnopeus <H=hidas | N=nopea>"
+			"desc": "Selityksien vieritysnopeus (H=hidas | N=nopea)"
 		},
 		"QCMaxVoltage": {
 			"text2": [
@@ -224,7 +226,7 @@
 				"Tehon-",
 				"rajoitus"
 			],
-			"desc": "Suurin sallittu teho <Watti>"
+			"desc": "Suurin sallittu teho (Watti)"
 		},
 		"ReverseButtonTempChange": {
 			"text2": [
@@ -252,28 +254,28 @@
 				"Herätyspulssin",
 				"voimakkuus"
 			],
-			"desc": "Herätyspulssin voimakkuus <watti>"
+			"desc": "Herätyspulssin voimakkuus (watti)"
 		},
 		"HallEffSensitivity": {
 			"text2": [
 				"Hall-",
 				"herk."
 			],
-			"desc": "Hall-efektianturin herkkyys lepotilan tunnistuksessa  <P=pois | A=alhainen | K=keskiverto | S=suuri>"
+			"desc": "Hall-efektianturin herkkyys lepotilan tunnistuksessa  (P=pois | A=alhainen | K=keskiverto | S=suuri)"
 		},
 		"LockingMode": {
 			"text2": [
 				"Salli nappien",
 				"lukitus"
 			],
-			"desc": "Kolvatessa paina molempia näppäimiä lukitaksesi ne <P=pois | V=vain tehostus | K=kaikki>"
+			"desc": "Kolvatessa paina molempia näppäimiä lukitaksesi ne (P=pois | V=vain tehostus | K=kaikki)"
 		},
 		"MinVolCell": {
 			"text2": [
 				"Pienin",
 				"jännite"
 			],
-			"desc": "Pienin sallittu jännite per kenno <Voltit> <3S: 3.0V - 3.7V, 4/5/6S: 2.4V - 3.7V>"
+			"desc": "Pienin sallittu jännite per kenno (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)"
 		},
 		"AnimLoop": {
 			"text2": [
@@ -287,7 +289,7 @@
 				"Animaation",
 				"nopeus"
 			],
-			"desc": "Animaatioiden nopeus valikossa <P=pois | A=alhainen | K=keskiverto | S=suuri>"
+			"desc": "Animaatioiden nopeus valikossa (P=pois | A=alhainen | K=keskiverto | S=suuri)"
 		},
 		"PowerPulseWait": {
 			"text2": [
@@ -305,7 +307,7 @@
 		},
 		"LanguageSwitch": {
 			"text2": [
-				"Language:",
+				"Kieli:",
 				" FI       Suomi"
 			],
 			"desc": ""

Translations/translation_FR.json

@@ -48,14 +48,14 @@
 		"SettingRightChar": "D",
 		"SettingLeftChar": "G",
 		"SettingAutoChar": "A",
-		"SettingFastChar": "R",
+		"SettingOffChar": "D",
 		"SettingSlowChar": "L",
 		"SettingMediumChar": "M",
-		"SettingOffChar": "D",
+		"SettingFastChar": "R",
+		"SettingStartNoneChar": "D",
 		"SettingStartSolderingChar": "A",
 		"SettingStartSleepChar": "V",
 		"SettingStartSleepOffChar": "O",
-		"SettingStartNoneChar": "D",
 		"SettingSensitivityOff": "D",
 		"SettingSensitivityLow": "B",
 		"SettingSensitivityMedium": "M",
@@ -157,7 +157,7 @@
 				"Orientation",
 				"de l'écran"
 			],
-			"desc": "A=automatique | G=gaucher | D=droitier"
+			"desc": "D=droitier | G=gaucher | A=automatique"
 		},
 		"BoostTemperature": {
 			"text2": [

Translations/translation_HR.json

@@ -48,14 +48,14 @@
 		"SettingRightChar": "D",
 		"SettingLeftChar": "L",
 		"SettingAutoChar": "A",
-		"SettingFastChar": "B",
+		"SettingOffChar": "O",
 		"SettingSlowChar": "S",
 		"SettingMediumChar": "M",
-		"SettingOffChar": "O",
-		"SettingStartSolderingChar": "T",
-		"SettingStartSleepChar": "S",
-		"SettingStartSleepOffChar": "O",
-		"SettingStartNoneChar": "F",
+		"SettingFastChar": "B",
+		"SettingStartNoneChar": "I",
+		"SettingStartSolderingChar": "L",
+		"SettingStartSleepChar": "R",
+		"SettingStartSleepOffChar": "S",
 		"SettingSensitivityOff": "O",
 		"SettingSensitivityLow": "L",
 		"SettingSensitivityMedium": "M",
@@ -108,42 +108,42 @@
 				"Izvor",
 				"napajanja"
 			],
-			"desc": "Izvor napajanja. Postavlja napon isključivanja. <DC 10V> <S 3.3V po ćeliji>"
+			"desc": "Izvor napajanja. Postavlja napon isključivanja. (DC 10V) (S 3.3V po ćeliji)"
 		},
 		"SleepTemperature": {
 			"text2": [
 				"Temp",
 				"spavanja"
 			],
-			"desc": "Temperatura na koju se spušta lemilica nakon određenog vremena mirovanja. <C/F>"
+			"desc": "Temperatura na koju se spušta lemilica nakon određenog vremena mirovanja. (C | F)"
 		},
 		"SleepTimeout": {
 			"text2": [
 				"Vrijeme",
 				"spavanja"
 			],
-			"desc": "Vrijeme mirovanja nakon kojega lemilica spušta temperaturu. <Minute/Sekunde>"
+			"desc": "Vrijeme mirovanja nakon kojega lemilica spušta temperaturu. (Minute | Sekunde)"
 		},
 		"ShutdownTimeout": {
 			"text2": [
 				"Vrijeme",
 				"gašenja"
 			],
-			"desc": "Vrijeme mirovanja nakon kojega će se lemilica ugasiti. <Minute>"
+			"desc": "Vrijeme mirovanja nakon kojega će se lemilica ugasiti. (Minute)"
 		},
 		"MotionSensitivity": {
 			"text2": [
 				"Osjetljivost",
 				"pokreta"
 			],
-			"desc": "Osjetljivost prepoznavanja pokreta. <0=Ugašeno, 1=Najmanje osjetljivo, 9=Najosjetljivije>"
+			"desc": "Osjetljivost prepoznavanja pokreta. (0=Ugašeno | 1=Najmanje osjetljivo | ... | 9=Najosjetljivije)"
 		},
 		"TemperatureUnit": {
 			"text2": [
 				"Jedinica",
 				"temperature"
 			],
-			"desc": "Jedinica temperature. <C=Celzij, F=Fahrenheit>"
+			"desc": "Jedinica temperature. (C=Celzij | F=Fahrenheit)"
 		},
 		"AdvancedIdle": {
 			"text2": [
@@ -157,7 +157,7 @@
 				"Rotacija",
 				"ekrana"
 			],
-			"desc": "Orijentacija ekrana. <A=Automatski, L=Ljevoruki, D=Desnoruki>"
+			"desc": "Orijentacija ekrana. (D=Desnoruki | L=Ljevoruki | A=Automatski)"
 		},
 		"BoostTemperature": {
 			"text2": [
@@ -171,7 +171,7 @@
 				"Auto",
 				"start"
 			],
-			"desc": "Ako je aktivno, lemilica po uključivanju napajanja odmah počinje grijati."
+			"desc": "Ako je aktivno, lemilica po uključivanju napajanja odmah počinje grijati. (I=isključeno | L=lemljenje | R=rezervni | S=rezervni sobna temperatura)"
 		},
 		"CooldownBlink": {
 			"text2": [
@@ -213,7 +213,7 @@
 				"Brzina",
 				"poruka"
 			],
-			"desc": "Brzina kretanja dugačkih poruka. <B=brzo, S=sporo>"
+			"desc": "Brzina kretanja dugačkih poruka. (B=brzo | S=sporo)"
 		},
 		"QCMaxVoltage": {
 			"text2": [
@@ -227,7 +227,7 @@
 				"Power",
 				"Limit"
 			],
-			"desc": "Maximum power the iron can use <Watts>"
+			"desc": "Maximum power the iron can use (Watts)"
 		},
 		"ReverseButtonTempChange": {
 			"text2": [
@@ -262,21 +262,21 @@
 				"Hall Eff",
 				"Sensitivity"
 			],
-			"desc": "Sensitivity of the Hall effect sensor in detecting sleep <O=Off,L=Low,M=Medium,H=High>"
+			"desc": "Sensitivity of the Hall effect sensor in detecting sleep (O=Off | L=Low | M=Medium | H=High)"
 		},
 		"LockingMode": {
 			"text2": [
 				"Allow buttons",
 				"locking"
 			],
-			"desc": "When soldering, long press on both buttons lock them <D=Disable, B=Boost only, F=Full locking>"
+			"desc": "When soldering, long press on both buttons lock them (D=Disable | B=Boost only | F=Full locking)"
 		},
 		"MinVolCell": {
 			"text2": [
 				"Minimum",
 				"voltage"
 			],
-			"desc": "Minimum allowed voltage per cell <Volts> <3S: 3.0V - 3.7V, 4/5/6S: 2.4V - 3.7V>"
+			"desc": "Minimum allowed voltage per cell (3S: 3 - 3.7V, 4-6S: 2.4 - 3.7V)"
 		},
 		"AnimLoop": {
 			"text2": [
@@ -290,7 +290,7 @@
 				"Anim.",
 				"speed"
 			],
-			"desc": "Speed of icon animations in menu <O=off | L=low | M=medium | H=high>"
+			"desc": "Speed of icon animations in menu (O=off | L=low | M=medium | H=high)"
 		},
 		"PowerPulseWait": {
 			"text2": [
@@ -308,7 +308,7 @@
 		},
 		"LanguageSwitch": {
 			"text2": [
-				"Language:",
+				"Jezik:",
 				" HR    Hrvatski"
 			],
 			"desc": ""

Translations/translation_HU.json

@@ -51,14 +51,14 @@
 		"SettingRightChar": "J",
 		"SettingLeftChar": "B",
 		"SettingAutoChar": "A",
-		"SettingFastChar": "G",
+		"SettingOffChar": "0",
 		"SettingSlowChar": "L",
 		"SettingMediumChar": "K",
-		"SettingOffChar": "0",
-		"SettingStartSolderingChar": "F",
-		"SettingStartSleepChar": "Z",
-		"SettingStartSleepOffChar": "S",
+		"SettingFastChar": "G",
 		"SettingStartNoneChar": "K",
+		"SettingStartSolderingChar": "F",
+		"SettingStartSleepChar": "A",
+		"SettingStartSleepOffChar": "S",
 		"SettingSensitivityOff": "0",
 		"SettingSensitivityLow": "A",
 		"SettingSensitivityMedium": "K",
@@ -111,42 +111,42 @@
 				"Áram",
 				"forrás"
 			],
-			"desc": "Kikapcsolási feszültség beállítása (DC:10V, S:3.3V/LiPo cella)"
+			"desc": "Kikapcsolási feszültség beállítása (DC:10V | S:3.3V/LiPo cella)"
 		},
 		"SleepTemperature": {
 			"text2": [
 				"Alvási",
 				"hőmérséklet"
 			],
-			"desc": "Hőmérséklet alvó módban <C/F>"
+			"desc": "Hőmérséklet alvó módban (C | F)"
 		},
 		"SleepTimeout": {
 			"text2": [
 				"Alvás",
 				"időzítő"
 			],
-			"desc": "Alvási időzítő <perc/másodperc>"
+			"desc": "Alvási időzítő (perc | másodperc)"
 		},
 		"ShutdownTimeout": {
 			"text2": [
 				"Kikapcsolás",
 				"időzítő"
 			],
-			"desc": "Kikapcsolási időzítő <perc>"
+			"desc": "Kikapcsolási időzítő (perc)"
 		},
 		"MotionSensitivity": {
 			"text2": [
 				"Mozgás",
 				"érzékenység"
 			],
-			"desc": "Mozgás érzékenység beállítása (0=kikapcsolva 1=legkevésbé érzékeny 9=legérzékenyebb)"
+			"desc": "Mozgás érzékenység beállítása (0=kikapcsolva | 1=legkevésbé érzékeny | ... | 9=legérzékenyebb)"
 		},
 		"TemperatureUnit": {
 			"text2": [
 				"Hőmérséklet",
 				"mértékegysége"
 			],
-			"desc": "Hőmérséklet mértékegysége (C=Celsius F=Fahrenheit)"
+			"desc": "Hőmérséklet mértékegysége (C=Celsius | F=Fahrenheit)"
 		},
 		"AdvancedIdle": {
 			"text2": [
@@ -160,7 +160,7 @@
 				"Kijelző",
 				"tájolása"
 			],
-			"desc": "Kijelző tájolása (A=automatikus B=balkezes J=jobbkezes)"
+			"desc": "Kijelző tájolása (J=jobbkezes | B=balkezes | A=automatikus)"
 		},
 		"BoostTemperature": {
 			"text2": [
@@ -174,7 +174,7 @@
 				"Automatikus",
 				"indítás"
 			],
-			"desc": "Bekapcsolás után automatikusan lépjen forrasztás módba (F=forrasztás S=szobahőmérséklet Z=alvó mód K=ki)"
+			"desc": "Bekapcsolás után automatikusan lépjen forrasztás módba (K=ki | F=forrasztás | A=alvó mód | S=szobahőmérséklet)"
 		},
 		"CooldownBlink": {
 			"text2": [
@@ -244,42 +244,42 @@
 				"Hőm. váltás",
 				"rövid"
 			],
-			"desc": "Hőmérséklet váltás rövid gombnyomásra <C/F>"
+			"desc": "Hőmérséklet váltás rövid gombnyomásra (C | F)"
 		},
 		"TempChangeLongStep": {
 			"text2": [
 				"Hőm. váltás",
 				"hosszú"
 			],
-			"desc": "Hőmérséklet váltás hosszú gombnyomásra <C/F>"
+			"desc": "Hőmérséklet váltás hosszú gombnyomásra (C | F)"
 		},
 		"PowerPulsePower": {
 			"text2": [
 				"Ébr. pulzus",
 				"nagysága"
 			],
-			"desc": "Powerbankot ébrentartó áramfelvételi pulzusok nagysága <W>"
+			"desc": "Powerbankot ébrentartó áramfelvételi pulzusok nagysága (W)"
 		},
 		"HallEffSensitivity": {
 			"text2": [
 				"Alvásérzékelő",
 				"érzékenység"
 			],
-			"desc": "Alvásérzékelő gyorsulásmérő érzékenysége (0=ki A=alacsony K=közepes M=magas)"
+			"desc": "Alvásérzékelő gyorsulásmérő érzékenysége (0=ki | A=alacsony | K=közepes | M=magas)"
 		},
 		"LockingMode": {
 			"text2": [
 				"Lezárás",
 				"engedélyezés"
 			],
-			"desc": "Forrasztás közben mindkét gombot hosszan lenyomva rögzíti a hőmérsékletet (K=ki B=csak \"boost\" mód T=teljes lezárás)"
+			"desc": "Forrasztás közben mindkét gombot hosszan lenyomva rögzíti a hőmérsékletet (K=ki | B=csak \"boost\" mód | T=teljes lezárás)"
 		},
 		"MinVolCell": {
 			"text2": [
 				"Minimum",
 				"feszültség"
 			],
-			"desc": "Minimális engedélyezett cellafeszültség <V> (3S: 3.0V-3.7V, 4/5/6S: 2.4V-3.7V)"
+			"desc": "Minimális engedélyezett cellafeszültség (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)"
 		},
 		"AnimLoop": {
 			"text2": [
@@ -293,25 +293,25 @@
 				"Animáció",
 				"sebessége"
 			],
-			"desc": "Menüikonok animációjának sebessége (0=ki L=lassú K=közepes G=gyors)"
+			"desc": "Menüikonok animációjának sebessége (0=ki | L=lassú | K=közepes | G=gyors)"
 		},
 		"PowerPulseWait": {
 			"text2": [
 				"Ébr. pulzus",
 				"időköze"
 			],
-			"desc": "Powerbankot ébrentartó áramfelvételi pulzusok időköze <x2.5s>"
+			"desc": "Powerbankot ébrentartó áramfelvételi pulzusok időköze (x2.5s)"
 		},
 		"PowerPulseDuration": {
 			"text2": [
 				"Ébr. pulzus",
 				"időtartama"
 			],
-			"desc": "Powerbankot ébrentartó áramfelvételi pulzusok időtartama <x250ms>"
+			"desc": "Powerbankot ébrentartó áramfelvételi pulzusok időtartama (x250ms)"
 		},
 		"LanguageSwitch": {
 			"text2": [
-				"Language:",
+				"Nyelv:",
 				" HU      Magyar"
 			],
 			"desc": ""

Translations/translation_IT.json

@@ -48,14 +48,14 @@
 		"SettingRightChar": "D",
 		"SettingLeftChar": "S",
 		"SettingAutoChar": "A",
-		"SettingFastChar": "V",
+		"SettingOffChar": "O",
 		"SettingSlowChar": "L",
 		"SettingMediumChar": "M",
-		"SettingOffChar": "O",
+		"SettingFastChar": "V",
+		"SettingStartNoneChar": "D",
 		"SettingStartSolderingChar": "S",
 		"SettingStartSleepChar": "R",
 		"SettingStartSleepOffChar": "A",
-		"SettingStartNoneChar": "D",
 		"SettingSensitivityOff": "O",
 		"SettingSensitivityLow": "B",
 		"SettingSensitivityMedium": "M",
@@ -157,7 +157,7 @@
 				"Orientamento",
 				"display"
 			],
-			"desc": "Imposta l'orientamento del display [A: automatico; S: mano sinistra; D: mano destra]"
+			"desc": "Imposta l'orientamento del display [D: mano destra; S: mano sinistra; A: automatico]"
 		},
 		"BoostTemperature": {
 			"text2": [

Translations/translation_JA_JP.json

@@ -46,14 +46,14 @@
 		"SettingRightChar": "右",
 		"SettingLeftChar": "左",
 		"SettingAutoChar": "自",
-		"SettingFastChar": "早",
+		"SettingOffChar": "X",
 		"SettingSlowChar": "遅",
 		"SettingMediumChar": "中",
-		"SettingOffChar": "X",
+		"SettingFastChar": "早",
+		"SettingStartNoneChar": "X",
 		"SettingStartSolderingChar": "熱",
 		"SettingStartSleepChar": "待",
 		"SettingStartSleepOffChar": "室",
-		"SettingStartNoneChar": "X",
 		"SettingSensitivityOff": "X",
 		"SettingSensitivityLow": "低",
 		"SettingSensitivityMedium": "中",
@@ -116,7 +116,7 @@
 		},
 		"DisplayRotation": {
 			"text2": "画面の向き",
-			"desc": "自=自動 | 左=左利き | 右=右利き"
+			"desc": "右=右利き | 左=左利き | 自=自動"
 		},
 		"BoostTemperature": {
 			"text2": "ブースト温度",

Translations/translation_LT.json

@@ -27,10 +27,7 @@
 		"YourGainMessage": "Greitis:"
 	},
 	"messagesWarn": {
-		"ResetOKMessage": [
-			"Atstatytas OK",
-			""
-		],
+		"ResetOKMessage": "Atstatytas OK",
 		"SettingsResetMessage": [
 			"Nust. atstatyti!",
 			""
@@ -51,14 +48,14 @@
 		"SettingRightChar": "D",
 		"SettingLeftChar": "K",
 		"SettingAutoChar": "A",
-		"SettingFastChar": "G",
+		"SettingOffChar": "I",
 		"SettingSlowChar": "L",
 		"SettingMediumChar": "V",
-		"SettingOffChar": "I",
+		"SettingFastChar": "G",
+		"SettingStartNoneChar": "N",
 		"SettingStartSolderingChar": "T",
 		"SettingStartSleepChar": "M",
 		"SettingStartSleepOffChar": "K",
-		"SettingStartNoneChar": "N",
 		"SettingSensitivityOff": "I",
 		"SettingSensitivityLow": "Ž",
 		"SettingSensitivityMedium": "V",
@@ -111,7 +108,7 @@
 				"Maitinimo",
 				"šaltinis"
 			],
-			"desc": "Išjungimo įtampa. <DC 10V> arba celių (S) kiekis (3.3V per celę)>"
+			"desc": "Išjungimo įtampa. (DC 10V) (arba celių [S] kiekis [3.3V per celę])"
 		},
 		"SleepTemperature": {
 			"text2": [
@@ -125,28 +122,28 @@
 				"Miego",
 				"laikas"
 			],
-			"desc": "Užmigimo laikas <sekundės/minutės>"
+			"desc": "Užmigimo laikas (sekundės | minutės)"
 		},
 		"ShutdownTimeout": {
 			"text2": [
 				"Išjungimo",
 				"laikas"
 			],
-			"desc": "Išjungimo laikas <minutės>"
+			"desc": "Išjungimo laikas (minutės)"
 		},
 		"MotionSensitivity": {
 			"text2": [
 				"Judesio",
 				"jautrumas"
 			],
-			"desc": "Judesio jautrumas <0=Išjungta, 1=Mažiausias, 9=Didžiausias>"
+			"desc": "Judesio jautrumas (0=Išjungta | 1=Mažiausias | ... | 9=Didžiausias)"
 		},
 		"TemperatureUnit": {
 			"text2": [
 				"Temperatūros",
 				"vienetai"
 			],
-			"desc": "Temperatūros vienetai <C=Celsijus, F=Farenheitas>"
+			"desc": "Temperatūros vienetai (C=Celsijus | F=Farenheitas)"
 		},
 		"AdvancedIdle": {
 			"text2": [
@@ -160,7 +157,7 @@
 				"Ekrano",
 				"orientacija"
 			],
-			"desc": "Ekrano orientacija <A=Automatinė, K=Kairiarankiams, D=Dešiniarankiams>"
+			"desc": "Ekrano orientacija (D=Dešiniarankiams | K=Kairiarankiams | A=Automatinė)"
 		},
 		"BoostTemperature": {
 			"text2": [
@@ -174,7 +171,7 @@
 				"Automatinis",
 				"paleidimas"
 			],
-			"desc": "Ar pradėti kaitininti iš karto įjungus lituoklį <N=Ne, T=Taip, M=Miegas, K=Miegoti kambario temperatūroje>"
+			"desc": "Ar pradėti kaitininti iš karto įjungus lituoklį (N=Ne | T=Taip | M=Miegas | K=Miegoti kambario temperatūroje)"
 		},
 		"CooldownBlink": {
 			"text2": [
@@ -230,7 +227,7 @@
 				"Galios",
 				"riba"
 			],
-			"desc": "Didžiausia galia, kurią gali naudoti lituoklis <Vatai>"
+			"desc": "Didžiausia galia, kurią gali naudoti lituoklis (Vatai)"
 		},
 		"ReverseButtonTempChange": {
 			"text2": [
@@ -265,21 +262,21 @@
 				"Holo",
 				"jutiklis"
 			],
-			"desc": "Holo jutiklio jautrumas nustatant miegą <I=Išjungtas, Ž=Žemas, V=Vidutinis, A=Aukštas>"
+			"desc": "Holo jutiklio jautrumas nustatant miegą (I=Išjungtas | Ž=Žemas | V=Vidutinis | A=Aukštas)"
 		},
 		"LockingMode": {
 			"text2": [
 				"Mygtukų",
 				"užraktas"
 			],
-			"desc": "Lituodami, ilgai paspauskite abu mygtukus, kad juos užrakintumėte <I=Išjungta, T=leidžiamas tik Turbo režimas, V=Visiškas užrakinimas>"
+			"desc": "Lituodami, ilgai paspauskite abu mygtukus, kad juos užrakintumėte (I=Išjungta | T=leidžiamas tik Turbo režimas | V=Visiškas užrakinimas)"
 		},
 		"MinVolCell": {
 			"text2": [
 				"Minimalus",
 				"voltažas"
 			],
-			"desc": "Minimalus voltažas, kuris yra leidžiamas kiekvienam baterijos elementui <Voltai> <3S: 3.0V - 3.7V, 4/5/6S: 2.4V - 3.7V>"
+			"desc": "Minimalus voltažas, kuris yra leidžiamas kiekvienam baterijos elementui (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)"
 		},
 		"AnimLoop": {
 			"text2": [
@@ -293,7 +290,7 @@
 				"Animacijų",
 				"greitis"
 			],
-			"desc": "Paveiksliukų animacijų greitis meniu punktuose <I=Išjungtas | L=Lėtas | V=Vidutinis | G=Greitas>"
+			"desc": "Paveiksliukų animacijų greitis meniu punktuose (I=Išjungtas | L=Lėtas | V=Vidutinis | G=Greitas)"
 		},
 		"PowerPulseWait": {
 			"text2": [

Translations/translation_NL.json

@@ -40,38 +40,29 @@
 			"No USB-PD IC",
 			"detected!"
 		],
-		"LockingKeysString": [
-			" GEBLOKKEERD",
-			""
-		],
-		"UnlockingKeysString": [
-			"GEDEBLOKKEERD",
-			""
-		],
-		"WarningKeysLockedString": [
-			"!GEBLOKKEERD!",
-			""
-		]
+		"LockingKeysString": " GEBLOKKEERD",
+		"UnlockingKeysString": "GEDEBLOKKEERD",
+		"WarningKeysLockedString": "!GEBLOKKEERD!"
 	},
 	"characters": {
 		"SettingRightChar": "R",
 		"SettingLeftChar": "L",
 		"SettingAutoChar": "A",
-		"SettingFastChar": "F",
+		"SettingOffChar": "O",
 		"SettingSlowChar": "S",
 		"SettingMediumChar": "M",
-		"SettingOffChar": "O",
+		"SettingFastChar": "F",
+		"SettingStartNoneChar": "F",
 		"SettingStartSolderingChar": "T",
 		"SettingStartSleepChar": "S",
-		"SettingStartSleepOffChar": "O",
-		"SettingStartNoneChar": "F",
-		"SettingLockDisableChar": "U",
-		"SettingLockBoostChar": "B",
-		"SettingLockFullChar": "V",
+		"SettingStartSleepOffChar": "K",
 		"SettingSensitivityOff": "O",
 		"SettingSensitivityLow": "L",
 		"SettingSensitivityMedium": "M",
 		"SettingSensitivityHigh": "H",
+		"SettingLockDisableChar": "U",
+		"SettingLockBoostChar": "B",
+		"SettingLockFullChar": "V",
 		"SettingNAChar": "N/A"
 	},
 	"menuGroups": {
@@ -117,7 +108,7 @@
 				"Spannings-",
 				"bron"
 			],
-			"desc": "Spanningsbron. Stelt drempelspanning in. <DC 10V> <S 3.3V per cel>"
+			"desc": "Spanningsbron. Stelt drempelspanning in. (DC 10V) (S 3.3V per cel)"
 		},
 		"SleepTemperature": {
 			"text2": [
@@ -131,28 +122,28 @@
 				"Slaap",
 				"time-out"
 			],
-			"desc": "Slaap time-out <Minuten/Seconden>"
+			"desc": "Slaap time-out (Minuten | Seconden)"
 		},
 		"ShutdownTimeout": {
 			"text2": [
 				"Uitschakel",
 				"time-out"
 			],
-			"desc": "Automatisch afsluiten time-out <Minuten>"
+			"desc": "Automatisch afsluiten time-out (Minuten)"
 		},
 		"MotionSensitivity": {
 			"text2": [
 				"Bewegings-",
 				"gevoeligheid"
 			],
-			"desc": "Bewegingsgevoeligheid <0=uit 1=minst gevoelig 9=meest gevoelig>"
+			"desc": "Bewegingsgevoeligheid (0=uit | 1=minst gevoelig | ... | 9=meest gevoelig)"
 		},
 		"TemperatureUnit": {
 			"text2": [
 				"Temperatuur",
 				"eenheid"
 			],
-			"desc": "Temperatuureenheid <C=Celsius F=Fahrenheit>"
+			"desc": "Temperatuureenheid (C=Celsius | F=Fahrenheit)"
 		},
 		"AdvancedIdle": {
 			"text2": [
@@ -166,7 +157,7 @@
 				"Scherm-",
 				"oriëntatie"
 			],
-			"desc": "Schermoriëntatie <A=Automatisch L=Linkshandig R=Rechtshandig>"
+			"desc": "Schermoriëntatie (R=Rechtshandig | L=Linkshandig | A=Automatisch)"
 		},
 		"BoostTemperature": {
 			"text2": [
@@ -180,7 +171,7 @@
 				"Auto",
 				"start"
 			],
-			"desc": "Breng de soldeerbout direct op temperatuur bij het opstarten. <T=Soldeertemperatuur, S=Slaapstand-temperatuur, F=Uit>"
+			"desc": "Breng de soldeerbout direct op temperatuur bij het opstarten. (F=Uit | T=Soldeertemperatuur | S=Slaapstand-temperatuur | K=Slaapstand kamertemperatuur)"
 		},
 		"CooldownBlink": {
 			"text2": [
@@ -208,7 +199,7 @@
 				"Calibreer",
 				"input-voltage?"
 			],
-			"desc": "VIN Calibreren. <druk lang om te sluiten>."
+			"desc": "VIN Calibreren. (druk lang om te sluiten)."
 		},
 		"AdvancedSoldering": {
 			"text2": [
@@ -236,7 +227,7 @@
 				"Vermogen",
 				"limiet"
 			],
-			"desc": "Maximaal vermogen <Watts>"
+			"desc": "Maximaal vermogen (Watts)"
 		},
 		"ReverseButtonTempChange": {
 			"text2": [
@@ -271,21 +262,21 @@
 				"Hall Eff",
 				"Sensitivity"
 			],
-			"desc": "Sensitivity of the Hall effect sensor in detecting sleep <O=Off,L=Low,M=Medium,H=High>"
+			"desc": "Sensitivity of the Hall effect sensor in detecting sleep (O=Off | L=Low | M=Medium | H=High)"
 		},
 		"LockingMode": {
 			"text2": [
 				"Blokkeer",
 				"knoppen"
 			],
-			"desc": "Tijdens solderen lang op beide knoppen drukken, blokkeert ze. <U=Uit, B=Alleen boost, V=Volledig blokkeren>"
+			"desc": "Tijdens solderen lang op beide knoppen drukken, blokkeert ze. (U=Uit | B=Alleen boost | V=Volledig blokkeren)"
 		},
 		"MinVolCell": {
 			"text2": [
 				"Minimum",
 				"voltage"
 			],
-			"desc": "Minimum allowed voltage per cell <Volts> <3S: 3.0V - 3.7V, 4/5/6S: 2.4V - 3.7V>"
+			"desc": "Minimum allowed voltage per cell (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)"
 		},
 		"AnimLoop": {
 			"text2": [
@@ -299,7 +290,7 @@
 				"Anim.",
 				"speed"
 			],
-			"desc": "Speed of icon animations in menu <O=off | L=low | M=medium | H=high>"
+			"desc": "Speed of icon animations in menu (O=off | L=low | M=medium | H=high)"
 		},
 		"PowerPulseWait": {
 			"text2": [
@@ -317,7 +308,7 @@
 		},
 		"LanguageSwitch": {
 			"text2": [
-				"Language:",
+				"Spraak :",
 				" NL  Nederlands"
 			],
 			"desc": ""

Translations/translation_NL_BE.json

@@ -48,14 +48,14 @@
 		"SettingRightChar": "R",
 		"SettingLeftChar": "L",
 		"SettingAutoChar": "A",
-		"SettingFastChar": "S",
+		"SettingOffChar": "O",
 		"SettingSlowChar": "T",
 		"SettingMediumChar": "M",
-		"SettingOffChar": "O",
+		"SettingFastChar": "S",
+		"SettingStartNoneChar": "F",
 		"SettingStartSolderingChar": "T",
 		"SettingStartSleepChar": "S",
-		"SettingStartSleepOffChar": "O",
-		"SettingStartNoneChar": "F",
+		"SettingStartSleepOffChar": "K",
 		"SettingSensitivityOff": "O",
 		"SettingSensitivityLow": "L",
 		"SettingSensitivityMedium": "M",
@@ -108,42 +108,42 @@
 				"Spannings-",
 				"bron"
 			],
-			"desc": "Spanningsbron. Stelt minimumspanning in. <DC 10V> <S 3.3V per cel>"
+			"desc": "Spanningsbron. Stelt minimumspanning in. (DC 10V) (S 3.3V per cel)"
 		},
 		"SleepTemperature": {
 			"text2": [
 				"Slaap",
 				"temp"
 			],
-			"desc": "Temperatuur in slaapstand <°C>"
+			"desc": "Temperatuur in slaapstand (°C)"
 		},
 		"SleepTimeout": {
 			"text2": [
 				"Slaap",
 				"time-out"
 			],
-			"desc": "Slaapstand time-out <Minuten/Seconden>"
+			"desc": "Slaapstand time-out (Minuten | Seconden)"
 		},
 		"ShutdownTimeout": {
 			"text2": [
 				"Uitschakel",
 				"time-out"
 			],
-			"desc": "Automatisch afsluiten time-out <Minuten>"
+			"desc": "Automatisch afsluiten time-out (Minuten)"
 		},
 		"MotionSensitivity": {
 			"text2": [
 				"Bewegings-",
 				"gevoeligheid"
 			],
-			"desc": "Bewegingsgevoeligheid <0.uit 1.minst gevoelig 9.meest gevoelig>"
+			"desc": "Bewegingsgevoeligheid (0=uit | 1=minst gevoelig | ... | 9=meest gevoelig)"
 		},
 		"TemperatureUnit": {
 			"text2": [
 				"Temperatuur",
 				"schaal"
 			],
-			"desc": "Temperatuurschaal <°C=Celsius °F=Fahrenheit>"
+			"desc": "Temperatuurschaal (°C=Celsius | °F=Fahrenheit)"
 		},
 		"AdvancedIdle": {
 			"text2": [
@@ -157,7 +157,7 @@
 				"Scherm-",
 				"oriëntatie"
 			],
-			"desc": "Schermoriëntatie <A. Automatisch L. Linkshandig R. Rechtshandig>"
+			"desc": "Schermoriëntatie (R=Rechtshandig | L=Linkshandig | A=Automatisch)"
 		},
 		"BoostTemperature": {
 			"text2": [
@@ -171,7 +171,7 @@
 				"Auto",
 				"start"
 			],
-			"desc": "Breng de soldeerbout op temperatuur bij het opstarten. T=Soldeertemperatuur, S=Slaapstand-temperatuur, F=Uit"
+			"desc": "Breng de soldeerbout op temperatuur bij het opstarten. (F=Uit | T=Soldeertemperatuur | S=Slaapstand-temperatuur | K=Slaapstand kamertemperatuur)"
 		},
 		"CooldownBlink": {
 			"text2": [
@@ -227,7 +227,7 @@
 				"Power",
 				"Limit"
 			],
-			"desc": "Maximum power the iron can use <Watts>"
+			"desc": "Maximum power the iron can use (Watts)"
 		},
 		"ReverseButtonTempChange": {
 			"text2": [
@@ -262,21 +262,21 @@
 				"Hall Eff",
 				"Sensitivity"
 			],
-			"desc": "Sensitivity of the Hall effect sensor in detecting sleep <O=Off,L=Low,M=Medium,H=High>"
+			"desc": "Sensitivity of the Hall effect sensor in detecting sleep (O=Off | L=Low | M=Medium | H=High)"
 		},
 		"LockingMode": {
 			"text2": [
 				"Allow buttons",
 				"locking"
 			],
-			"desc": "When soldering, long press on both buttons lock them <D=Disable, B=Boost only, F=Full locking>"
+			"desc": "When soldering, long press on both buttons lock them (D=Disable | B=Boost only | F=Full locking)"
 		},
 		"MinVolCell": {
 			"text2": [
 				"Minimum",
 				"voltage"
 			],
-			"desc": "Minimum allowed voltage per cell <Volts> <3S: 3.0V - 3.7V, 4/5/6S: 2.4V - 3.7V>"
+			"desc": "Minimum allowed voltage per cell (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)"
 		},
 		"AnimLoop": {
 			"text2": [
@@ -290,7 +290,7 @@
 				"Anim.",
 				"speed"
 			],
-			"desc": "Speed of icon animations in menu <O=off | L=low | M=medium | H=high>"
+			"desc": "Speed of icon animations in menu (O=off | L=low | M=medium | H=high)"
 		},
 		"PowerPulseWait": {
 			"text2": [
@@ -308,7 +308,7 @@
 		},
 		"LanguageSwitch": {
 			"text2": [
-				"Language:",
+				"Spraak:",
 				" NL_BE   Vlaams"
 			],
 			"desc": ""

Translations/translation_NO.json

@@ -48,14 +48,14 @@
 		"SettingRightChar": "H",
 		"SettingLeftChar": "V",
 		"SettingAutoChar": "A",
-		"SettingFastChar": "H",
+		"SettingOffChar": "O",
 		"SettingSlowChar": "L",
 		"SettingMediumChar": "M",
-		"SettingOffChar": "O",
+		"SettingFastChar": "H",
+		"SettingStartNoneChar": "I",
 		"SettingStartSolderingChar": "L",
 		"SettingStartSleepChar": "D",
-		"SettingStartSleepOffChar": "O",
-		"SettingStartNoneChar": "I",
+		"SettingStartSleepOffChar": "R",
 		"SettingSensitivityOff": "O",
 		"SettingSensitivityLow": "L",
 		"SettingSensitivityMedium": "M",
@@ -108,42 +108,42 @@
 				"Kilde",
 				""
 			],
-			"desc": "Strømforsyning. Sett nedre spenning for automatisk nedstenging. <DC 10V <S 3.3V per celle"
+			"desc": "Strømforsyning. Sett nedre spenning for automatisk nedstenging. (DC 10V) (S 3.3V per celle)"
 		},
 		"SleepTemperature": {
 			"text2": [
 				"DTmp",
 				""
 			],
-			"desc": "Dvaletemperatur <C>"
+			"desc": "Dvaletemperatur (C)"
 		},
 		"SleepTimeout": {
 			"text2": [
 				"DTid",
 				""
 			],
-			"desc": "Tid før dvale <Minutter/Sekunder"
+			"desc": "Tid før dvale (Minutter | Sekunder)"
 		},
 		"ShutdownTimeout": {
 			"text2": [
 				"AvTid",
 				""
 			],
-			"desc": "Tid før automatisk nedstenging <Minutter"
+			"desc": "Tid før automatisk nedstenging (Minutter)"
 		},
 		"MotionSensitivity": {
 			"text2": [
 				"BSensr",
 				""
 			],
-			"desc": "Bevegelsesfølsomhet <0.Inaktiv 1.Minst følsom 9.Mest følsom"
+			"desc": "Bevegelsesfølsomhet (0=Inaktiv | 1=Minst følsom | ... | 9=Mest følsom)"
 		},
 		"TemperatureUnit": {
 			"text2": [
 				"TmpEnh",
 				""
 			],
-			"desc": "Temperaturskala <C=Celsius F=Fahrenheit"
+			"desc": "Temperaturskala (C=Celsius | F=Fahrenheit)"
 		},
 		"AdvancedIdle": {
 			"text2": [
@@ -157,7 +157,7 @@
 				"SkRetn",
 				""
 			],
-			"desc": "Skjermretning <A. Automatisk V. Venstrehendt H. Høyrehendt"
+			"desc": "Skjermretning (H=Høyrehendt | V=Venstrehendt | A=Automatisk)"
 		},
 		"BoostTemperature": {
 			"text2": [
@@ -171,7 +171,7 @@
 				"AStart",
 				""
 			],
-			"desc": "Start automatisk med lodding når strøm kobles til. L=Lodding, D=Dvale, I=Inaktiv"
+			"desc": "Start automatisk med lodding når strøm kobles til. (I=Inaktiv | L=Lodding | D=Dvale | R=Dvale romtemperatur)"
 		},
 		"CooldownBlink": {
 			"text2": [
@@ -227,7 +227,7 @@
 				"Power",
 				"Limit"
 			],
-			"desc": "Maximum power the iron can use <Watts>"
+			"desc": "Maximum power the iron can use (Watts)"
 		},
 		"ReverseButtonTempChange": {
 			"text2": [
@@ -262,21 +262,21 @@
 				"Hall Eff",
 				"Sensitivity"
 			],
-			"desc": "Sensitivity of the Hall effect sensor in detecting sleep <O=Off,L=Low,M=Medium,H=High>"
+			"desc": "Sensitivity of the Hall effect sensor in detecting sleep (O=Off | L=Low | M=Medium | H=High)"
 		},
 		"LockingMode": {
 			"text2": [
 				"Allow buttons",
 				"locking"
 			],
-			"desc": "When soldering, long press on both buttons lock them <D=Disable, B=Boost only, F=Full locking>"
+			"desc": "When soldering, long press on both buttons lock them (D=Disable | B=Boost only | F=Full locking)"
 		},
 		"MinVolCell": {
 			"text2": [
 				"Minimum",
 				"voltage"
 			],
-			"desc": "Minimum allowed voltage per cell <Volts> <3S: 3.0V - 3.7V, 4/5/6S: 2.4V - 3.7V>"
+			"desc": "Minimum allowed voltage per cell (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)"
 		},
 		"AnimLoop": {
 			"text2": [
@@ -290,7 +290,7 @@
 				"Anim.",
 				"speed"
 			],
-			"desc": "Speed of icon animations in menu <O=off | L=low | M=medium | H=high>"
+			"desc": "Speed of icon animations in menu (O=off | L=low | M=medium | H=high)"
 		},
 		"PowerPulseWait": {
 			"text2": [
@@ -308,7 +308,7 @@
 		},
 		"LanguageSwitch": {
 			"text2": [
-				"Language:",
+				"Språk:",
 				" NO       Norsk"
 			],
 			"desc": ""

Translations/translation_PL.json

@@ -49,14 +49,14 @@
 		"SettingRightChar": "P",
 		"SettingLeftChar": "L",
 		"SettingAutoChar": "A",
-		"SettingFastChar": "S",
+		"SettingOffChar": "O",
 		"SettingSlowChar": "W",
 		"SettingMediumChar": "M",
-		"SettingOffChar": "O",
+		"SettingFastChar": "S",
+		"SettingStartNoneChar": "B",
 		"SettingStartSolderingChar": "T",
 		"SettingStartSleepChar": "Z",
 		"SettingStartSleepOffChar": "O",
-		"SettingStartNoneChar": "B",
 		"SettingSensitivityOff": "O",
 		"SettingSensitivityLow": "N",
 		"SettingSensitivityMedium": "Ś",
@@ -109,42 +109,42 @@
 				"Źródło",
 				"zasilania"
 			],
-			"desc": "Źródło zasilania. Ustaw napięcie odcięcia. <DC 10V> <S 3.3V dla ogniw Li, wyłącz limit mocy>"
+			"desc": "Źródło zasilania. Ustaw napięcie odcięcia. (DC 10V) (S 3.3V dla ogniw Li, wyłącz limit mocy)"
 		},
 		"SleepTemperature": {
 			"text2": [
 				"Temp.",
 				"uśpienia"
 			],
-			"desc": "Temperatura w trybie uśpienia <°C>"
+			"desc": "Temperatura w trybie uśpienia (°C)"
 		},
 		"SleepTimeout": {
 			"text2": [
 				"Czas do",
 				"uśpienia"
 			],
-			"desc": "Czas do przejścia w tryb uśpienia <minuty/sekundy>"
+			"desc": "Czas do przejścia w tryb uśpienia (minuty | sekundy)"
 		},
 		"ShutdownTimeout": {
 			"text2": [
 				"Czas do",
 				"wyłączenia"
 			],
-			"desc": "Czas do wyłączenia <minuty>"
+			"desc": "Czas do wyłączenia (minuty)"
 		},
 		"MotionSensitivity": {
 			"text2": [
 				"Czułość",
 				"wykr. ruchu"
 			],
-			"desc": "Czułość wykrywania ruchu <0-Wyłączona, 1-Minimalna, 9-Maksymalna>"
+			"desc": "Czułość wykrywania ruchu (0=Wyłączona | 1=Minimalna | ... | 9=Maksymalna)"
 		},
 		"TemperatureUnit": {
 			"text2": [
 				"Jednostka",
 				"temperatury"
 			],
-			"desc": "Jednostka temperatury <C-Celciusz, F-Fahrenheit>"
+			"desc": "Jednostka temperatury (C=Celciusz | F=Fahrenheit)"
 		},
 		"AdvancedIdle": {
 			"text2": [
@@ -158,7 +158,7 @@
 				"Obrót",
 				"ekranu"
 			],
-			"desc": "Obrót ekranu <A-automatycznie, L-dla leworęcznych, P-dla praworęcznych>"
+			"desc": "Obrót ekranu (P=dla praworęcznych | L=dla leworęcznych | A=automatycznie)"
 		},
 		"BoostTemperature": {
 			"text2": [
@@ -172,7 +172,7 @@
 				"Aut. uruch.",
 				"tr. lutowania"
 			],
-			"desc": "Automatyczne uruchamianie trybu lutowania po włączeniu zasilania.<B - wyłączone, T - lutowanie, Z - uśpienie, O - uśpienie w temp. pokojowej"
+			"desc": "Automatyczne uruchamianie trybu lutowania po włączeniu zasilania. (B=wyłączone | T=lutowanie | Z=uśpienie | O=uśpienie w temp. pokojowej)"
 		},
 		"CooldownBlink": {
 			"text2": [
@@ -221,14 +221,14 @@
 				"Moc",
 				"w W"
 			],
-			"desc": "Moc używanego zasilacza w <W>"
+			"desc": "Moc używanego zasilacza w (W)"
 		},
 		"PowerLimit": {
 			"text2": [
 				"Ogr.",
 				"mocy"
 			],
-			"desc": "Maksymalna moc <W>, jakiej może użyć lutownica"
+			"desc": "Maksymalna moc (W), jakiej może użyć lutownica"
 		},
 		"ReverseButtonTempChange": {
 			"text2": [
@@ -242,42 +242,42 @@
 				"Zm. temp.",
 				"kr. przyc."
 			],
-			"desc": "Wartość zmiany temperatury, po krótkim przyciśnięciu <°C>"
+			"desc": "Wartość zmiany temperatury, po krótkim przyciśnięciu (°C)"
 		},
 		"TempChangeLongStep": {
 			"text2": [
 				"Zm. temp.",
 				"dł. przyc."
 			],
-			"desc": "Wartość zmiany temperatury, po długim przyciśnięciu <°C>"
+			"desc": "Wartość zmiany temperatury, po długim przyciśnięciu (°C)"
 		},
 		"PowerPulsePower": {
 			"text2": [
 				"Moc",
 				"impulsu"
 			],
-			"desc": "W przypadku używania powerbanku, utrzymuj moc na poziomie <W> aby nie uśpić powerbanku"
+			"desc": "W przypadku używania powerbanku, utrzymuj moc na poziomie (W) aby nie uśpić powerbanku"
 		},
 		"HallEffSensitivity": {
 			"text2": [
 				"Czułość",
 				"cz.Halla"
 			],
-			"desc": "Czułość czujnika Halla, używanego do przechodznia w tryb uśpienia <O-Wył,N-Niska,Ś=Średnia,W=Wysoka>"
+			"desc": "Czułość czujnika Halla, używanego do przechodznia w tryb uśpienia (O=Wył | N=Niska | Ś=Średnia | W=Wysoka)"
 		},
 		"LockingMode": {
 			"text2": [
 				"Blokada",
 				"przycisków"
 			],
-			"desc": "W trybie lutowania, wciśnij oba przyciski aby je zablokować <O-Wyłączona, B-tylko Boost, P-pełna blokada>"
+			"desc": "W trybie lutowania, wciśnij oba przyciski aby je zablokować (O=Wyłączona | B=tylko Boost | P=pełna blokada)"
 		},
 		"MinVolCell": {
 			"text2": [
 				"Minimalne",
 				"napięcie"
 			],
-			"desc": "Minimalne dozwolone napięcie na komórkę <W woltach> <3S: 3.0V - 3.7V, 4/5/6S: 2.4V - 3.7V>"
+			"desc": "Minimalne dozwolone napięcie na komórkę (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)"
 		},
 		"AnimLoop": {
 			"text2": [
@@ -291,7 +291,7 @@
 				"Prędkosć",
 				"animacji"
 			],
-			"desc": "Prędkość animacji ikon w menu <O=wył. | L=mała | M=średnia | H=duża>"
+			"desc": "Prędkość animacji ikon w menu (O=wył. | L=mała | M=średnia | H=duża)"
 		},
 		"PowerPulseWait": {
 			"text2": [
@@ -309,7 +309,7 @@
 		},
 		"LanguageSwitch": {
 			"text2": [
-				"Language:",
+				"Język :",
 				" PL      Polski"
 			],
 			"desc": ""

Translations/translation_PT.json

@@ -40,7 +40,7 @@
 			"No USB-PD IC",
 			"detected!"
 		],
-		"LockingKeysString": " LOCKED",
+		"LockingKeysString": "LOCKED",
 		"UnlockingKeysString": "UNLOCKED",
 		"WarningKeysLockedString": "!LOCKED!"
 	},
@@ -48,14 +48,14 @@
 		"SettingRightChar": "D",
 		"SettingLeftChar": "C",
 		"SettingAutoChar": "A",
-		"SettingFastChar": "R",
+		"SettingOffChar": "O",
 		"SettingSlowChar": "L",
 		"SettingMediumChar": "M",
-		"SettingOffChar": "O",
-		"SettingStartSolderingChar": "T",
-		"SettingStartSleepChar": "S",
-		"SettingStartSleepOffChar": "O",
-		"SettingStartNoneChar": "F",
+		"SettingFastChar": "R",
+		"SettingStartNoneChar": "D",
+		"SettingStartSolderingChar": "S",
+		"SettingStartSleepChar": "H",
+		"SettingStartSleepOffChar": "A",
 		"SettingSensitivityOff": "O",
 		"SettingSensitivityLow": "L",
 		"SettingSensitivityMedium": "M",
@@ -108,42 +108,42 @@
 				"Fonte",
 				"alimentação"
 			],
-			"desc": "Fonte de alimentação. Define a tensão de corte. <DC=10V> <S=3.3V/célula>"
+			"desc": "Fonte de alimentação. Define a tensão de corte. (DC=10V) (S=3.3V/célula)"
 		},
 		"SleepTemperature": {
 			"text2": [
 				"Temperat.",
 				"repouso"
 			],
-			"desc": "Temperatura de repouso <C>"
+			"desc": "Temperatura de repouso (C)"
 		},
 		"SleepTimeout": {
 			"text2": [
 				"Tempo",
 				"repouso"
 			],
-			"desc": "Tempo para repouso <Minutos/Segundos>"
+			"desc": "Tempo para repouso (Minutos | Segundos)"
 		},
 		"ShutdownTimeout": {
 			"text2": [
 				"Tempo",
 				"desligam."
 			],
-			"desc": "Tempo para desligamento <Minutos>"
+			"desc": "Tempo para desligamento (Minutos)"
 		},
 		"MotionSensitivity": {
 			"text2": [
 				"Sensibilidade",
 				"movimento"
 			],
-			"desc": "Sensibilidade ao movimento <0=Desligado 1=Menor 9=Maior>"
+			"desc": "Sensibilidade ao movimento (0=Desligado | 1=Menor | ... | 9=Maior)"
 		},
 		"TemperatureUnit": {
 			"text2": [
 				"Unidade",
 				"temperatura"
 			],
-			"desc": "Unidade de temperatura <C=Celsius F=Fahrenheit>"
+			"desc": "Unidade de temperatura (C=Celsius | F=Fahrenheit)"
 		},
 		"AdvancedIdle": {
 			"text2": [
@@ -157,7 +157,7 @@
 				"Orientação",
 				"tela"
 			],
-			"desc": "Orientação da tela <A.utomática C.anhoto D.estro>"
+			"desc": "Orientação da tela (D=estro | C=anhoto | A=utomática)"
 		},
 		"BoostTemperature": {
 			"text2": [
@@ -171,7 +171,7 @@
 				"Partida",
 				"automática"
 			],
-			"desc": "Aquece a ponta automaticamente ao ligar"
+			"desc": "Aquece a ponta automaticamente ao ligar (D=desligar | S=soldagem | H=hibernar | A=hibernar temp. ambiente)"
 		},
 		"CooldownBlink": {
 			"text2": [
@@ -227,7 +227,7 @@
 				"Power",
 				"Limit"
 			],
-			"desc": "Maximum power the iron can use <Watts>"
+			"desc": "Maximum power the iron can use (Watts)"
 		},
 		"ReverseButtonTempChange": {
 			"text2": [
@@ -262,21 +262,21 @@
 				"Hall Eff",
 				"Sensitivity"
 			],
-			"desc": "Sensitivity of the Hall effect sensor in detecting sleep <O=Off,L=Low,M=Medium,H=High>"
+			"desc": "Sensitivity of the Hall effect sensor in detecting sleep (O=Off | L=Low | M=Medium | H=High)"
 		},
 		"LockingMode": {
 			"text2": [
 				"Allow buttons",
 				"locking"
 			],
-			"desc": "When soldering, long press on both buttons lock them <D=Disable, B=Boost only, F=Full locking>"
+			"desc": "When soldering, long press on both buttons lock them (D=Disable | B=Boost only | F=Full locking)"
 		},
 		"MinVolCell": {
 			"text2": [
 				"Minimum",
 				"voltage"
 			],
-			"desc": "Minimum allowed voltage per cell <Volts> <3S: 3.0V - 3.7V, 4/5/6S: 2.4V - 3.7V>"
+			"desc": "Minimum allowed voltage per cell (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)"
 		},
 		"AnimLoop": {
 			"text2": [
@@ -290,7 +290,7 @@
 				"Anim.",
 				"speed"
 			],
-			"desc": "Speed of icon animations in menu <O=off | L=low | M=medium | H=high>"
+			"desc": "Speed of icon animations in menu (O=off | L=low | M=medium | H=high)"
 		},
 		"PowerPulseWait": {
 			"text2": [
@@ -308,7 +308,7 @@
 		},
 		"LanguageSwitch": {
 			"text2": [
-				"Language:",
+				"Idioma :",
 				" PT   Português"
 			],
 			"desc": ""

Translations/translation_RU.json

@@ -41,7 +41,7 @@
 			"No USB-PD IC",
 			"detected!"
 		],
-		"LockingKeysString": " LOCKED",
+		"LockingKeysString": "LOCKED",
 		"UnlockingKeysString": "UNLOCKED",
 		"WarningKeysLockedString": "!LOCKED!"
 	},
@@ -49,14 +49,14 @@
 		"SettingRightChar": "П",
 		"SettingLeftChar": "Л",
 		"SettingAutoChar": "А",
-		"SettingFastChar": "Б",
+		"SettingOffChar": "O",
 		"SettingSlowChar": "М",
 		"SettingMediumChar": "M",
-		"SettingOffChar": "O",
+		"SettingFastChar": "Б",
+		"SettingStartNoneChar": "В",
 		"SettingStartSolderingChar": "П",
 		"SettingStartSleepChar": "О",
 		"SettingStartSleepOffChar": "К",
-		"SettingStartNoneChar": "В",
 		"SettingSensitivityOff": "О",
 		"SettingSensitivityLow": "Н",
 		"SettingSensitivityMedium": "С",
@@ -109,7 +109,7 @@
 				"Источник",
 				"питания"
 			],
-			"desc": "Источник питания. Устанавливает напряжение отсечки. <DC 10В> <S 3.3В на ячейку, без лимита мощности>"
+			"desc": "Источник питания. Устанавливает напряжение отсечки. (DC 10В) (S 3,3В на ячейку, без лимита мощности)"
 		},
 		"SleepTemperature": {
 			"text2": [
@@ -123,28 +123,28 @@
 				"Таймаут",
 				"ожидания"
 			],
-			"desc": "Время до перехода в режим ожидания <Минуты/Секунды>"
+			"desc": "Время до перехода в режим ожидания (Минуты | Секунды)"
 		},
 		"ShutdownTimeout": {
 			"text2": [
 				"Таймаут",
 				"выключения"
 			],
-			"desc": "Время до отключения паяльника <Минуты>"
+			"desc": "Время до отключения паяльника (Минуты)"
 		},
 		"MotionSensitivity": {
 			"text2": [
 				"Чувствительн.",
 				"акселерометра"
 			],
-			"desc": "Чувствительность акселерометра <0=Выкл., 1=Мин., 9=Макс.>"
+			"desc": "Чувствительность акселерометра (0=Выкл. | 1=Мин. | ... | 9=Макс.)"
 		},
 		"TemperatureUnit": {
 			"text2": [
 				"Единицы",
 				"температуры"
 			],
-			"desc": "Единицы измерения температуры <C=Цельcия, F=Фаренгейта>"
+			"desc": "Единицы измерения температуры (C=Цельcия | F=Фаренгейта)"
 		},
 		"AdvancedIdle": {
 			"text2": [
@@ -158,7 +158,7 @@
 				"Ориентация",
 				"экрана"
 			],
-			"desc": "Ориентация экрана <А=Авто, Л=Левая рука, П=Правая рука>"
+			"desc": "Ориентация экрана (П=Правая рука | Л=Левая рука | А=Авто)"
 		},
 		"BoostTemperature": {
 			"text2": [
@@ -172,7 +172,7 @@
 				"Авто",
 				"старт"
 			],
-			"desc": "Режим, в котором запускается паяльник при подаче питания <П=Пайка, О=Ожидание, К=Ожидание при комн. темп., В=Выкл.>"
+			"desc": "Режим, в котором запускается паяльник при подаче питания (В=Выкл. | П=Пайка | О=Ожидание | К=Ожидание при комн. темп.)"
 		},
 		"CooldownBlink": {
 			"text2": [
@@ -200,7 +200,7 @@
 				"Калибровка",
 				"напряжения"
 			],
-			"desc": "Калибровка входного напряжения <длинное нажатие для выхода>"
+			"desc": "Калибровка входного напряжения (длинное нажатие для выхода)"
 		},
 		"AdvancedSoldering": {
 			"text2": [
@@ -214,7 +214,7 @@
 				"Скорость",
 				"текста"
 			],
-			"desc": "Скорость прокрутки текста <М=медленно, Б=быстро>"
+			"desc": "Скорость прокрутки текста (М=медленно | Б=быстро)"
 		},
 		"QCMaxVoltage": {
 			"text2": [
@@ -228,7 +228,7 @@
 				"Предел",
 				"мощности"
 			],
-			"desc": "Максимальная мощность, которую может использовать паяльник <Ватт>"
+			"desc": "Максимальная мощность, которую может использовать паяльник (Ватт)"
 		},
 		"ReverseButtonTempChange": {
 			"text2": [
@@ -263,21 +263,21 @@
 				"Эффект Холла",
 				"чувствительность"
 			],
-			"desc": "Уровень чувствительности датчика холла в режиме сна <О=Отключено, Н=Низкий, С=Средний, В=Высокий>"
+			"desc": "Уровень чувствительности датчика холла в режиме сна (О=Отключено | Н=Низкий | С=Средний | В=Высокий)"
 		},
 		"LockingMode": {
 			"text2": [
 				"Разрешить",
 				"блок. кнопок"
 			],
-			"desc": "При работе длинное нажатие обеих кнопок блокирует их <О=Отключено, Т=Только турбо, П=Полная блокировка>"
+			"desc": "При работе длинное нажатие обеих кнопок блокирует их (О=Отключено | Т=Только турбо | П=Полная блокировка)"
 		},
 		"MinVolCell": {
 			"text2": [
 				"Мин.",
 				"напр."
 			],
-			"desc": "Минимальное разрешенное напряжение на ячейку <В вольтах> <3S: 3.0V - 3.7V, 4/5/6S: 2.4V - 3.7V>"
+			"desc": "Минимальное разрешенное напряжение на ячейку (3S: 3 - 3,7V | 4-S: 2,4 - 3,7V)"
 		},
 		"AnimLoop": {
 			"text2": [
@@ -291,25 +291,25 @@
 				"Скорость",
 				"анимации"
 			],
-			"desc": "Скорость анимации иконок в главном меню <Милисекунды> <О=Отключено, Н=Низкий, С=Средний, В=Высокий>"
+			"desc": "Скорость анимации иконок в главном меню (Милисекунды) (О=Отключено | Н=Низкий | С=Средний | В=Высокий)"
 		},
 		"PowerPulseWait": {
 			"text2": [
 				"Power pulse",
 				"wait time"
 			],
-			"desc": "Time to wait before triggering every keep-awake pulse (x 2.5s)"
+			"desc": "Time to wait before triggering every keep-awake pulse (x 2,5с)"
 		},
 		"PowerPulseDuration": {
 			"text2": [
 				"Power pulse",
 				"duration"
 			],
-			"desc": "Keep-awake-pulse duration (x 250ms)"
+			"desc": "Keep-awake-pulse duration (x 250мс)"
 		},
 		"LanguageSwitch": {
 			"text2": [
-				"Language:",
+				"Язык:",
 				" RU     Русский"
 			],
 			"desc": ""

Translations/translation_SK.json

@@ -40,7 +40,7 @@
 			"Chýba čip USB-PD",
 			""
 		],
-		"LockingKeysString": " ZABLOK.",
+		"LockingKeysString": "ZABLOK.",
 		"UnlockingKeysString": "ODBLOK.",
 		"WarningKeysLockedString": "!ZABLOK!"
 	},
@@ -48,14 +48,14 @@
 		"SettingRightChar": "P",
 		"SettingLeftChar": "L",
 		"SettingAutoChar": "A",
-		"SettingFastChar": "R",
+		"SettingOffChar": "Z",
 		"SettingSlowChar": "P",
 		"SettingMediumChar": "M",
-		"SettingOffChar": "Z",
-		"SettingStartSolderingChar": "S",
-		"SettingStartSleepChar": "K",
-		"SettingStartSleepOffChar": "O",
-		"SettingStartNoneChar": "N",
+		"SettingFastChar": "R",
+		"SettingStartNoneChar": "V",
+		"SettingStartSolderingChar": "Z",
+		"SettingStartSleepChar": "S",
+		"SettingStartSleepOffChar": "I",
 		"SettingSensitivityOff": "Z",
 		"SettingSensitivityLow": "N",
 		"SettingSensitivityMedium": "S",
@@ -108,7 +108,7 @@
 				"Zdroj",
 				"napätia"
 			],
-			"desc": "Zdroj napätia. Nastavenie napätia pre vypnutie (cutoff)  <DC=10V, nS=n*3.3V pre LiIon články>"
+			"desc": "Zdroj napätia. Nastavenie napätia pre vypnutie (cutoff)  (DC=10V | nS=n*3.3V pre LiIon články)"
 		},
 		"SleepTemperature": {
 			"text2": [
@@ -122,42 +122,42 @@
 				"Pokojový",
 				"režim po"
 			],
-			"desc": "Pokojový režim po <S=sekundách/M=minútach>"
+			"desc": "Pokojový režim po (S=sekundách | M=minútach)"
 		},
 		"ShutdownTimeout": {
 			"text2": [
 				"Vypnutie",
 				"po"
 			],
-			"desc": "Čas na vypnutie <minúty>"
+			"desc": "Čas na vypnutie (minúty)"
 		},
 		"MotionSensitivity": {
 			"text2": [
 				"Citlivosť",
 				"pohybu"
 			],
-			"desc": "Citlivosť detekcie pohybu <0=Vyp, 1=Min ... 9=Max>"
+			"desc": "Citlivosť detekcie pohybu (0=Vyp | 1=Min | ... | 9=Max)"
 		},
 		"TemperatureUnit": {
 			"text2": [
 				"Jednotka",
 				"teploty"
 			],
-			"desc": "Jednotky merania teploty <C=stupne Celzia, F=stupne Fahrenheita>"
+			"desc": "Jednotky merania teploty (C=stupne Celzia | F=stupne Fahrenheita)"
 		},
 		"AdvancedIdle": {
 			"text2": [
 				"Detaily v",
 				"pokoj. režime"
 			],
-			"desc": "Zobraziť detailné informácie v pokojovom režime <T=Zap, F=Vyp>"
+			"desc": "Zobraziť detailné informácie v pokojovom režime (T=Zap | F=Vyp)"
 		},
 		"DisplayRotation": {
 			"text2": [
 				"Orientácia",
 				"displeja"
 			],
-			"desc": "Orientácia displeja <A=Auto, L=Ľavák, P=Pravák>"
+			"desc": "Orientácia displeja (P=Pravák | L=Ľavák | A=Auto)"
 		},
 		"BoostTemperature": {
 			"text2": [
@@ -171,7 +171,7 @@
 				"Automatické",
 				"spustenie"
 			],
-			"desc": "Pri štarte spustiť režim spájkovania <S=Zap, N=Vyp, K=Spanok>"
+			"desc": "Pri štarte spustiť režim spájkovania (V=Vyp | Z=Spájkovanie | S=Spanok | I=Spanok izbová teplota)"
 		},
 		"CooldownBlink": {
 			"text2": [
@@ -227,7 +227,7 @@
 				"Obmedzenie",
 				"výkonu"
 			],
-			"desc": "Obmedzenie výkonu podľa použitého zdroja <watt>"
+			"desc": "Obmedzenie výkonu podľa použitého zdroja (watt)"
 		},
 		"ReverseButtonTempChange": {
 			"text2": [
@@ -255,28 +255,28 @@
 				"Intenzita",
 				"impulzu"
 			],
-			"desc": "Impulz udržujúci napájací zdroj zapnutý (power banky) <watt>"
+			"desc": "Impulz udržujúci napájací zdroj zapnutý (power banky) (watt)"
 		},
 		"HallEffSensitivity": {
 			"text2": [
 				"Citliv.",
 				"Hall"
 			],
-			"desc": "Citlivosť Halloveho senzora pre detekciu spánku <Z=Zakázať,N=Nízka,S=Stredná,V=Vysoká>"
+			"desc": "Citlivosť Halloveho senzora pre detekciu spánku (Z=Zakázať | N=Nízka | S=Stredná | V=Vysoká)"
 		},
 		"LockingMode": {
 			"text2": [
 				"Povoliť zámok",
 				"tlačidiel"
 			],
-			"desc": "Zamknutie tlačidiel - dlhé stlačenie oboch naraz počas spájkovania <Z=Zakázať, B=Okrem boost, P=Plné zamknutie>"
+			"desc": "Zamknutie tlačidiel - dlhé stlačenie oboch naraz počas spájkovania (Z=Zakázať | B=Okrem boost | P=Plné zamknutie)"
 		},
 		"MinVolCell": {
 			"text2": [
 				"Minimum",
 				"voltage"
 			],
-			"desc": "Minimum allowed voltage per cell <Volts> <3S: 3.0V - 3.7V, 4/5/6S: 2.4V - 3.7V>"
+			"desc": "Minimum allowed voltage per cell (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)"
 		},
 		"AnimLoop": {
 			"text2": [
@@ -290,7 +290,7 @@
 				"Anim.",
 				"speed"
 			],
-			"desc": "Speed of icon animations in menu <O=off | L=low | M=medium | H=high>"
+			"desc": "Speed of icon animations in menu (O=off | L=low | M=medium | H=high)"
 		},
 		"PowerPulseWait": {
 			"text2": [
@@ -308,7 +308,7 @@
 		},
 		"LanguageSwitch": {
 			"text2": [
-				"Language:",
+				"Jazyk:",
 				" SK  Slovenčina"
 			],
 			"desc": ""

Translations/translation_SL.json

@@ -48,14 +48,14 @@
 		"SettingRightChar": "D",
 		"SettingLeftChar": "L",
 		"SettingAutoChar": "S",
-		"SettingFastChar": "H",
+		"SettingOffChar": "U",
 		"SettingSlowChar": "P",
 		"SettingMediumChar": "M",
-		"SettingOffChar": "U",
+		"SettingFastChar": "H",
+		"SettingStartNoneChar": "U",
 		"SettingStartSolderingChar": "S",
 		"SettingStartSleepChar": "Z",
 		"SettingStartSleepOffChar": "V",
-		"SettingStartNoneChar": "U",
 		"SettingSensitivityOff": "U",
 		"SettingSensitivityLow": "N",
 		"SettingSensitivityMedium": "S",
@@ -108,7 +108,7 @@
 				"Vir",
 				"napajanja"
 			],
-			"desc": "Vir napajanja. Nastavi napetost izklopa. <DC 10V> <S 3.3V na celico>"
+			"desc": "Vir napajanja. Nastavi napetost izklopa. (DC 10V) (S 3.3V na celico)"
 		},
 		"SleepTemperature": {
 			"text2": [
@@ -122,14 +122,14 @@
 				"Čas do",
 				"spanja"
 			],
-			"desc": "Čas pred spanjem <S=sekunde | M=minute>"
+			"desc": "Čas pred spanjem (S=sekunde | M=minute)"
 		},
 		"ShutdownTimeout": {
 			"text2": [
 				"Čas do",
 				"izklopa"
 			],
-			"desc": "Čas do izklopa <M=minute>"
+			"desc": "Čas do izklopa (M=minute)"
 		},
 		"MotionSensitivity": {
 			"text2": [
@@ -143,7 +143,7 @@
 				"Enota za",
 				"temperaturo"
 			],
-			"desc": "Enota za temperaturo <C=celzij | F=fahrenheit>"
+			"desc": "Enota za temperaturo (C=celzij | F=fahrenheit)"
 		},
 		"AdvancedIdle": {
 			"text2": [
@@ -157,7 +157,7 @@
 				"Orientacija",
 				"zaslona"
 			],
-			"desc": "S=samodejno | L=levičar | D=desničar"
+			"desc": "D=desničar | L=levičar | S=samodejno"
 		},
 		"BoostTemperature": {
 			"text2": [
@@ -171,7 +171,7 @@
 				"Samodejni",
 				"zagon"
 			],
-			"desc": "Samodejno gretje konice ob vklopu <U=ugasnjeno | S=spajkanje | Z=spanje | V=spanje na sobni temperaturi>"
+			"desc": "Samodejno gretje konice ob vklopu (U=ugasnjeno | S=spajkanje | Z=spanje | V=spanje na sobni temperaturi)"
 		},
 		"CooldownBlink": {
 			"text2": [
@@ -199,7 +199,7 @@
 				"Kalibriram",
 				"vhodno napetost?"
 			],
-			"desc": "Kalibracija VIN <nastavitve z gumbi, dolg pritisk za izhod>"
+			"desc": "Kalibracija VIN (nastavitve z gumbi, dolg pritisk za izhod)"
 		},
 		"AdvancedSoldering": {
 			"text2": [
@@ -213,7 +213,7 @@
 				"Hitrost",
 				"besedila"
 			],
-			"desc": "Hitrost, s katero se prikazuje besedilo <P=počasi | H=hitro>"
+			"desc": "Hitrost, s katero se prikazuje besedilo (P=počasi | H=hitro)"
 		},
 		"QCMaxVoltage": {
 			"text2": [
@@ -262,21 +262,21 @@
 				"Občut.",
 				"Hall son"
 			],
-			"desc": "Občutljivost Hallove sonde za zaznavanje spanja <U=ugasnjen | N=nizka | S=srednja | V=visoka>"
+			"desc": "Občutljivost Hallove sonde za zaznavanje spanja (U=ugasnjen | N=nizka | S=srednja | V=visoka)"
 		},
 		"LockingMode": {
 			"text2": [
 				"Omogoči",
 				"zaklep gumbov"
 			],
-			"desc": "Za zaklep med spajkanjem drži oba gumba <O=onemogoči | L=le pospešeno | P=polno>"
+			"desc": "Za zaklep med spajkanjem drži oba gumba (O=onemogoči | L=le pospešeno | P=polno)"
 		},
 		"MinVolCell": {
 			"text2": [
 				"Minimum",
 				"voltage"
 			],
-			"desc": "Minimum allowed voltage per cell <Volts> <3S: 3.0V - 3.7V, 4/5/6S: 2.4V - 3.7V>"
+			"desc": "Minimum allowed voltage per cell (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)"
 		},
 		"AnimLoop": {
 			"text2": [
@@ -290,7 +290,7 @@
 				"Anim.",
 				"speed"
 			],
-			"desc": "Speed of icon animations in menu <O=off | L=low | M=medium | H=high>"
+			"desc": "Speed of icon animations in menu (O=off | L=low | M=medium | H=high)"
 		},
 		"PowerPulseWait": {
 			"text2": [
@@ -308,7 +308,7 @@
 		},
 		"LanguageSwitch": {
 			"text2": [
-				"Language:",
+				"Jezik:",
 				" SL Slovenščina"
 			],
 			"desc": ""

Translations/translation_SR_CYRL.json

@@ -40,7 +40,7 @@
 			"No USB-PD IC",
 			"detected!"
 		],
-		"LockingKeysString": " LOCKED",
+		"LockingKeysString": "LOCKED",
 		"UnlockingKeysString": "UNLOCKED",
 		"WarningKeysLockedString": "!LOCKED!"
 	},
@@ -48,14 +48,14 @@
 		"SettingRightChar": "Д",
 		"SettingLeftChar": "Л",
 		"SettingAutoChar": "А",
-		"SettingFastChar": "Б",
+		"SettingOffChar": "O",
 		"SettingSlowChar": "С",
 		"SettingMediumChar": "M",
-		"SettingOffChar": "O",
-		"SettingStartSolderingChar": "T",
-		"SettingStartSleepChar": "S",
-		"SettingStartSleepOffChar": "O",
-		"SettingStartNoneChar": "F",
+		"SettingFastChar": "Б",
+		"SettingStartNoneChar": "И",
+		"SettingStartSolderingChar": "Л",
+		"SettingStartSleepChar": "С",
+		"SettingStartSleepOffChar": "X",
 		"SettingSensitivityOff": "O",
 		"SettingSensitivityLow": "L",
 		"SettingSensitivityMedium": "M",
@@ -108,42 +108,42 @@
 				"Врста",
 				"напајања"
 			],
-			"desc": "Тип напајања; одређује најнижи радни напон. <DC=адаптер (10V), S=батерија (3,3V по ћелији)>"
+			"desc": "Тип напајања; одређује најнижи радни напон. (DC=адаптер [10V] | S=батерија [3,3V по ћелији])"
 		},
 		"SleepTemperature": {
 			"text2": [
 				"Темп.",
 				"спавања"
 			],
-			"desc": "Температура на коју се спушта лемилица након одређеног времена мировања. <C/F>"
+			"desc": "Температура на коју се спушта лемилица након одређеног времена мировања. (C | F)"
 		},
 		"SleepTimeout": {
 			"text2": [
 				"Време до",
 				"спавања"
 			],
-			"desc": "Време мировања након кога лемилица спушта температуру. <M=минути, S=секунде>"
+			"desc": "Време мировања након кога лемилица спушта температуру. (M=минути | S=секунде)"
 		},
 		"ShutdownTimeout": {
 			"text2": [
 				"Време до",
 				"гашења"
 			],
-			"desc": "Време мировања након кога се лемилица гаси. <M=минути>"
+			"desc": "Време мировања након кога се лемилица гаси. (M=минути)"
 		},
 		"MotionSensitivity": {
 			"text2": [
 				"Осетљивост",
 				"на покрет"
 			],
-			"desc": "Осетљивост сензора покрета. <0=искључено, 1=најмање осетљиво, 9=најосетљивије>"
+			"desc": "Осетљивост сензора покрета. (0=искључено | 1=најмање осетљиво | ... | 9=најосетљивије)"
 		},
 		"TemperatureUnit": {
 			"text2": [
 				"Јединица",
 				"температуре"
 			],
-			"desc": "Јединице у којима се приказује температура. <C=целзијус, F=фаренхајт>"
+			"desc": "Јединице у којима се приказује температура. (C=целзијус | F=фаренхајт)"
 		},
 		"AdvancedIdle": {
 			"text2": [
@@ -157,7 +157,7 @@
 				"Оријентација",
 				"екрана"
 			],
-			"desc": "Како је окренут екран. <А=аутоматски, Л=за леворуке, Д=за десноруке>"
+			"desc": "Како је окренут екран. (Д=за десноруке | Л=за леворуке | А=аутоматски)"
 		},
 		"BoostTemperature": {
 			"text2": [
@@ -171,7 +171,7 @@
 				"Врући",
 				"старт"
 			],
-			"desc": "Лемилица одмах по покретању прелази у режим лемљења и греје се."
+			"desc": "Лемилица одмах по покретању прелази у режим лемљења и греје се. (И=искључити | Л=лемљење | С=спавати | X=спавати собна температура)"
 		},
 		"CooldownBlink": {
 			"text2": [
@@ -213,7 +213,7 @@
 				"Брзина",
 				"порука"
 			],
-			"desc": "Брзина кретања описних порука попут ове. <С=споро, Б=брзо>"
+			"desc": "Брзина кретања описних порука попут ове. (С=споро | Б=брзо)"
 		},
 		"QCMaxVoltage": {
 			"text2": [
@@ -227,7 +227,7 @@
 				"Power",
 				"Limit"
 			],
-			"desc": "Maximum power the iron can use <Watts>"
+			"desc": "Maximum power the iron can use (Watts)"
 		},
 		"ReverseButtonTempChange": {
 			"text2": [
@@ -262,21 +262,21 @@
 				"Hall Eff",
 				"Sensitivity"
 			],
-			"desc": "Sensitivity of the Hall effect sensor in detecting sleep <O=Off,L=Low,M=Medium,H=High>"
+			"desc": "Sensitivity of the Hall effect sensor in detecting sleep (O=Off | L=Low | M=Medium | H=High)"
 		},
 		"LockingMode": {
 			"text2": [
 				"Allow buttons",
 				"locking"
 			],
-			"desc": "When soldering, long press on both buttons lock them <D=Disable, B=Boost only, F=Full locking>"
+			"desc": "When soldering, long press on both buttons lock them (D=Disable | B=Boost only | F=Full locking)"
 		},
 		"MinVolCell": {
 			"text2": [
 				"Minimum",
 				"voltage"
 			],
-			"desc": "Minimum allowed voltage per cell <Volts> <3S: 3.0V - 3.7V, 4/5/6S: 2.4V - 3.7V>"
+			"desc": "Minimum allowed voltage per cell (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)"
 		},
 		"AnimLoop": {
 			"text2": [
@@ -290,25 +290,25 @@
 				"Anim.",
 				"speed"
 			],
-			"desc": "Speed of icon animations in menu <O=off | L=low | M=medium | H=high>"
+			"desc": "Speed of icon animations in menu (O=off | L=low | M=medium | H=high)"
 		},
 		"PowerPulseWait": {
 			"text2": [
 				"Power pulse",
 				"wait time"
 			],
-			"desc": "Time to wait before triggering every keep-awake pulse (x 2.5s)"
+			"desc": "Time to wait before triggering every keep-awake pulse (x 2.5с)"
 		},
 		"PowerPulseDuration": {
 			"text2": [
 				"Power pulse",
 				"duration"
 			],
-			"desc": "Keep-awake-pulse duration (x 250ms)"
+			"desc": "Keep-awake-pulse duration (x 250мс)"
 		},
 		"LanguageSwitch": {
 			"text2": [
-				"Language:",
+				"Jезик:",
 				" SR      Српски"
 			],
 			"desc": ""

Translations/translation_SR_LATN.json

@@ -40,7 +40,7 @@
 			"No USB-PD IC",
 			"detected!"
 		],
-		"LockingKeysString": " LOCKED",
+		"LockingKeysString": "LOCKED",
 		"UnlockingKeysString": "UNLOCKED",
 		"WarningKeysLockedString": "!LOCKED!"
 	},
@@ -48,14 +48,14 @@
 		"SettingRightChar": "D",
 		"SettingLeftChar": "L",
 		"SettingAutoChar": "A",
-		"SettingFastChar": "B",
+		"SettingOffChar": "O",
 		"SettingSlowChar": "S",
 		"SettingMediumChar": "M",
-		"SettingOffChar": "O",
-		"SettingStartSolderingChar": "T",
+		"SettingFastChar": "B",
+		"SettingStartNoneChar": "I",
+		"SettingStartSolderingChar": "L",
 		"SettingStartSleepChar": "S",
-		"SettingStartSleepOffChar": "O",
-		"SettingStartNoneChar": "F",
+		"SettingStartSleepOffChar": "X",
 		"SettingSensitivityOff": "O",
 		"SettingSensitivityLow": "L",
 		"SettingSensitivityMedium": "M",
@@ -108,42 +108,42 @@
 				"Vrsta",
 				"napajanja"
 			],
-			"desc": "Tip napajanja; određuje najniži radni napon. <DC=adapter (10V), S=baterija (3,3V po ćeliji)>"
+			"desc": "Tip napajanja; određuje najniži radni napon. (DC=adapter [10V], S=baterija [3,3V po ćeliji])"
 		},
 		"SleepTemperature": {
 			"text2": [
 				"Temp.",
 				"spavanja"
 			],
-			"desc": "Temperatura na koju se spušta lemilica nakon određenog vremena mirovanja. <C/F>"
+			"desc": "Temperatura na koju se spušta lemilica nakon određenog vremena mirovanja. (C | F)"
 		},
 		"SleepTimeout": {
 			"text2": [
 				"Vreme do",
 				"spavanja"
 			],
-			"desc": "Vreme mirovanja nakon koga lemilica spušta temperaturu. <M=minuti, S=sekunde>"
+			"desc": "Vreme mirovanja nakon koga lemilica spušta temperaturu. (M=minuti | S=sekunde)"
 		},
 		"ShutdownTimeout": {
 			"text2": [
 				"Vreme do",
 				"gašenja"
 			],
-			"desc": "Vreme mirovanja nakon koga se lemilica gasi. <M=minuti>"
+			"desc": "Vreme mirovanja nakon koga se lemilica gasi. (M=minuti)"
 		},
 		"MotionSensitivity": {
 			"text2": [
 				"Osetljivost",
 				"na pokret"
 			],
-			"desc": "Osetljivost senzora pokreta. <0=isključeno, 1=najmanje osetljivo, 9=najosetljivije>"
+			"desc": "Osetljivost senzora pokreta. (0=isključeno | 1=najmanje osetljivo | ... | 9=najosetljivije)"
 		},
 		"TemperatureUnit": {
 			"text2": [
 				"Jedinica",
 				"temperature"
 			],
-			"desc": "Jedinice u kojima se prikazuje temperatura. <C=celzijus, F=farenhajt>"
+			"desc": "Jedinice u kojima se prikazuje temperatura. (C=celzijus | F=farenhajt)"
 		},
 		"AdvancedIdle": {
 			"text2": [
@@ -157,7 +157,7 @@
 				"Orijentacija",
 				"ekrana"
 			],
-			"desc": "Kako je okrenut ekran. <A=automatski, L=za levoruke, D=za desnoruke>"
+			"desc": "Kako je okrenut ekran. (D=za desnoruke | L=za levoruke | A=automatski)"
 		},
 		"BoostTemperature": {
 			"text2": [
@@ -171,7 +171,7 @@
 				"Vrući",
 				"start"
 			],
-			"desc": "Lemilica odmah po pokretanju prelazi u režim lemljenja i greje se."
+			"desc": "Lemilica odmah po pokretanju prelazi u režim lemljenja i greje se. (I=isključiti | L=lemljenje | S=spavati | X=spavati sobna temperatura)"
 		},
 		"CooldownBlink": {
 			"text2": [
@@ -213,7 +213,7 @@
 				"Brzina",
 				"poruka"
 			],
-			"desc": "Brzina kretanja opisnih poruka poput ove. <S=sporo, B=brzo>"
+			"desc": "Brzina kretanja opisnih poruka poput ove. (S=sporo | B=brzo)"
 		},
 		"QCMaxVoltage": {
 			"text2": [
@@ -227,7 +227,7 @@
 				"Power",
 				"Limit"
 			],
-			"desc": "Maximum power the iron can use <Watts>"
+			"desc": "Maximum power the iron can use (Watts)"
 		},
 		"ReverseButtonTempChange": {
 			"text2": [
@@ -262,21 +262,21 @@
 				"Hall Eff",
 				"Sensitivity"
 			],
-			"desc": "Sensitivity of the Hall effect sensor in detecting sleep <O=Off,L=Low,M=Medium,H=High>"
+			"desc": "Sensitivity of the Hall effect sensor in detecting sleep (O=Off | L=Low | M=Medium | H=High)"
 		},
 		"LockingMode": {
 			"text2": [
 				"Allow buttons",
 				"locking"
 			],
-			"desc": "When soldering, long press on both buttons lock them <D=Disable, B=Boost only, F=Full locking>"
+			"desc": "When soldering, long press on both buttons lock them (D=Disable | B=Boost only | F=Full locking)"
 		},
 		"MinVolCell": {
 			"text2": [
 				"Minimum",
 				"voltage"
 			],
-			"desc": "Minimum allowed voltage per cell <Volts> <3S: 3.0V - 3.7V, 4/5/6S: 2.4V - 3.7V>"
+			"desc": "Minimum allowed voltage per cell (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)"
 		},
 		"AnimLoop": {
 			"text2": [
@@ -290,7 +290,7 @@
 				"Anim.",
 				"speed"
 			],
-			"desc": "Speed of icon animations in menu <O=off | L=low | M=medium | H=high>"
+			"desc": "Speed of icon animations in menu (O=off | L=low | M=medium | H=high)"
 		},
 		"PowerPulseWait": {
 			"text2": [
@@ -308,7 +308,7 @@
 		},
 		"LanguageSwitch": {
 			"text2": [
-				"Language:",
+				"Jezik:",
 				" SR      Srpski"
 			],
 			"desc": ""

Translations/translation_SV.json

@@ -40,7 +40,7 @@
 			"No USB-PD IC",
 			"detected!"
 		],
-		"LockingKeysString": " LOCKED",
+		"LockingKeysString": "LOCKED",
 		"UnlockingKeysString": "UNLOCKED",
 		"WarningKeysLockedString": "!LOCKED!"
 	},
@@ -48,14 +48,14 @@
 		"SettingRightChar": "H",
 		"SettingLeftChar": "V",
 		"SettingAutoChar": "A",
-		"SettingFastChar": "S",
+		"SettingOffChar": "O",
 		"SettingSlowChar": "L",
 		"SettingMediumChar": "M",
-		"SettingOffChar": "O",
-		"SettingStartSolderingChar": "T",
-		"SettingStartSleepChar": "S",
-		"SettingStartSleepOffChar": "O",
-		"SettingStartNoneChar": "F",
+		"SettingFastChar": "S",
+		"SettingStartNoneChar": "A",
+		"SettingStartSolderingChar": "L",
+		"SettingStartSleepChar": "V",
+		"SettingStartSleepOffChar": "R",
 		"SettingSensitivityOff": "O",
 		"SettingSensitivityLow": "L",
 		"SettingSensitivityMedium": "M",
@@ -108,42 +108,42 @@
 				"Ström-",
 				"källa"
 			],
-			"desc": "Strömkälla. Anger lägsta spänning. <DC 10V> <S 3.3V per cell>"
+			"desc": "Strömkälla. Anger lägsta spänning. (DC 10V) (S 3.3V per cell)"
 		},
 		"SleepTemperature": {
 			"text2": [
 				"Vilo-",
 				"temp"
 			],
-			"desc": "Vilotemperatur <C>"
+			"desc": "Vilotemperatur (C)"
 		},
 		"SleepTimeout": {
 			"text2": [
 				"Vilo-",
 				"timeout"
 			],
-			"desc": "Vilo-timeout <Minuter/Seconder>"
+			"desc": "Vilo-timeout (Minuter | Seconder)"
 		},
 		"ShutdownTimeout": {
 			"text2": [
 				"Avstängn.",
 				"timeout"
 			],
-			"desc": "Avstängnings-timeout <Minuter>"
+			"desc": "Avstängnings-timeout (Minuter)"
 		},
 		"MotionSensitivity": {
 			"text2": [
 				"Rörelse-",
 				"känslighet"
 			],
-			"desc": "Rörelsekänslighet <0.Av 1.minst känslig 9.mest känslig>"
+			"desc": "Rörelsekänslighet (0=Av | 1=minst känslig | ... | 9=mest känslig)"
 		},
 		"TemperatureUnit": {
 			"text2": [
 				"Temperatur-",
 				"enheter"
 			],
-			"desc": "Temperaturenhet <C=Celsius F=Fahrenheit>"
+			"desc": "Temperaturenhet (C=Celsius | F=Fahrenheit)"
 		},
 		"AdvancedIdle": {
 			"text2": [
@@ -157,7 +157,7 @@
 				"Visnings",
 				"läge"
 			],
-			"desc": "Visningsläge <A. Automatisk V. Vänsterhänt H. Högerhänt>"
+			"desc": "Visningsläge (H=Högerhänt | V=Vänsterhänt | A=Automatisk)"
 		},
 		"BoostTemperature": {
 			"text2": [
@@ -171,7 +171,7 @@
 				"Auto",
 				"start"
 			],
-			"desc": "Startar automatiskt lödpennan vid uppstart. T=Lödning, S=Viloläge, F=Av"
+			"desc": "Startar automatiskt lödpennan vid uppstart. (A=Av | L=Lödning | V=Viloläge | R=Viloläge Rumstemperatur)"
 		},
 		"CooldownBlink": {
 			"text2": [
@@ -227,7 +227,7 @@
 				"Power",
 				"Limit"
 			],
-			"desc": "Maximum power the iron can use <Watts>"
+			"desc": "Maximum power the iron can use (Watts)"
 		},
 		"ReverseButtonTempChange": {
 			"text2": [
@@ -262,21 +262,21 @@
 				"Hall Eff",
 				"Sensitivity"
 			],
-			"desc": "Sensitivity of the Hall effect sensor in detecting sleep <O=Off,L=Low,M=Medium,H=High>"
+			"desc": "Sensitivity of the Hall effect sensor in detecting sleep (O=Off | L=Low | M=Medium | H=High)"
 		},
 		"LockingMode": {
 			"text2": [
 				"Allow buttons",
 				"locking"
 			],
-			"desc": "When soldering, long press on both buttons lock them <D=Disable, B=Boost only, F=Full locking>"
+			"desc": "When soldering, long press on both buttons lock them (D=Disable | B=Boost only | F=Full locking)"
 		},
 		"MinVolCell": {
 			"text2": [
 				"Minimum",
 				"voltage"
 			],
-			"desc": "Minimum allowed voltage per cell <Volts> <3S: 3.0V - 3.7V, 4/5/6S: 2.4V - 3.7V>"
+			"desc": "Minimum allowed voltage per cell (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)"
 		},
 		"AnimLoop": {
 			"text2": [
@@ -290,7 +290,7 @@
 				"Anim.",
 				"speed"
 			],
-			"desc": "Speed of icon animations in menu <O=off | L=low | M=medium | H=high>"
+			"desc": "Speed of icon animations in menu (O=off | L=low | M=medium | H=high)"
 		},
 		"PowerPulseWait": {
 			"text2": [
@@ -308,7 +308,7 @@
 		},
 		"LanguageSwitch": {
 			"text2": [
-				"Language:",
+				"Språk:",
 				" SV     Svenska"
 			],
 			"desc": ""

Translations/translation_TR.json

@@ -51,14 +51,14 @@
 		"SettingRightChar": "R",
 		"SettingLeftChar": "L",
 		"SettingAutoChar": "A",
-		"SettingFastChar": "F",
+		"SettingOffChar": "O",
 		"SettingSlowChar": "S",
 		"SettingMediumChar": "M",
-		"SettingOffChar": "O",
-		"SettingStartSolderingChar": "T",
-		"SettingStartSleepChar": "S",
+		"SettingFastChar": "F",
+		"SettingStartNoneChar": "K",
+		"SettingStartSolderingChar": "L",
+		"SettingStartSleepChar": "U",
 		"SettingStartSleepOffChar": "O",
-		"SettingStartNoneChar": "F",
 		"SettingSensitivityOff": "O",
 		"SettingSensitivityLow": "L",
 		"SettingSensitivityMedium": "M",
@@ -111,42 +111,42 @@
 				"GÇKYN",
 				""
 			],
-			"desc": "\"Güç Kaynağı\". En düşük çalışma voltajını ayarlar. <DC 10V> <S 3.3V hücre başına>"
+			"desc": "\"Güç Kaynağı\". En düşük çalışma voltajını ayarlar. (DC 10V) (S 3.3V hücre başına)"
 		},
 		"SleepTemperature": {
 			"text2": [
 				"BKSC",
 				""
 			],
-			"desc": "Bekleme Modu Sıcaklığı <C>"
+			"desc": "Bekleme Modu Sıcaklığı (C)"
 		},
 		"SleepTimeout": {
 			"text2": [
 				"BMZA",
 				""
 			],
-			"desc": "Bekleme Modu Zaman Aşımı <Dakika/Saniye>"
+			"desc": "Bekleme Modu Zaman Aşımı (Dakika | Saniye)"
 		},
 		"ShutdownTimeout": {
 			"text2": [
 				"KPTZA",
 				""
 			],
-			"desc": "Kapatma Zaman Aşımı <Dakika>"
+			"desc": "Kapatma Zaman Aşımı (Dakika)"
 		},
 		"MotionSensitivity": {
 			"text2": [
 				"HARHAS",
 				""
 			],
-			"desc": "Hareket Hassasiyeti <0.Kapalı 1.En az duyarlı 9.En duyarlı>"
+			"desc": "Hareket Hassasiyeti (0=Kapalı | 1=En az duyarlı | ... | 9=En duyarlı)"
 		},
 		"TemperatureUnit": {
 			"text2": [
 				"SCKBRM",
 				""
 			],
-			"desc": "Sıcaklık Birimi <C=Celsius F=Fahrenheit>"
+			"desc": "Sıcaklık Birimi (C=Celsius | F=Fahrenheit)"
 		},
 		"AdvancedIdle": {
 			"text2": [
@@ -160,7 +160,7 @@
 				"GRNYÖN",
 				""
 			],
-			"desc": "Görüntü Yönlendirme <A. Otomatik L. Solak R. Sağlak>"
+			"desc": "Görüntü Yönlendirme (R=Sağlak | L=Solak | A=Otomatik)"
 		},
 		"BoostEnabled": {
 			"text2": [
@@ -181,7 +181,7 @@
 				"OTOBAŞ",
 				""
 			],
-			"desc": "Güç verildiğinde otomatik olarak lehimleme modunda başlat. T=Lehimleme Modu, S= Uyku Modu,F=Kapalı"
+			"desc": "Güç verildiğinde otomatik olarak lehimleme modunda başlat. (K=Kapalı | L=Lehimleme Modu | U=Uyku Modu | O=Uyku Modu Oda Sıcaklığı)"
 		},
 		"CooldownBlink": {
 			"text2": [
@@ -223,7 +223,7 @@
 				"YZKYHZ",
 				""
 			],
-			"desc": "Bu yazının kayma hızı S= Yavaş, F= Hızlı"
+			"desc": "Bu yazının kayma hızı (S=Yavaş | F=Hızlı)"
 		},
 		"QCMaxVoltage": {
 			"text2": [
@@ -251,7 +251,7 @@
 				"Power",
 				"Limit"
 			],
-			"desc": "Havyanın kullanacağı en yüksek güç <Watts>"
+			"desc": "Havyanın kullanacağı en yüksek güç (Watts)"
 		},
 		"ReverseButtonTempChange": {
 			"text2": [
@@ -286,21 +286,21 @@
 				"Hall Eff",
 				"Sensitivity"
 			],
-			"desc": "Sensitivity of the Hall effect sensor in detecting sleep <O=Off,L=Low,M=Medium,H=High>"
+			"desc": "Sensitivity of the Hall effect sensor in detecting sleep (O=Off | L=Low | M=Medium | H=High)"
 		},
 		"LockingMode": {
 			"text2": [
 				"Allow buttons",
 				"locking"
 			],
-			"desc": "When soldering, long press on both buttons lock them <D=Disable, B=Boost only, F=Full locking>"
+			"desc": "When soldering, long press on both buttons lock them (D=Disable | B=Boost only | F=Full locking)"
 		},
 		"MinVolCell": {
 			"text2": [
 				"Minimum",
 				"voltage"
 			],
-			"desc": "Minimum allowed voltage per cell <Volts> <3S: 3.0V - 3.7V, 4/5/6S: 2.4V - 3.7V>"
+			"desc": "Minimum allowed voltage per cell (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)"
 		},
 		"AnimLoop": {
 			"text2": [
@@ -314,7 +314,7 @@
 				"Anim.",
 				"speed"
 			],
-			"desc": "Speed of icon animations in menu <O=off | L=low | M=medium | H=high>"
+			"desc": "Speed of icon animations in menu (O=off | L=low | M=medium | H=high)"
 		},
 		"PowerPulseWait": {
 			"text2": [
@@ -332,7 +332,7 @@
 		},
 		"LanguageSwitch": {
 			"text2": [
-				"Language:",
+				"Dil:",
 				" TR      Türkçe"
 			],
 			"desc": ""

Translations/translation_UK.json

@@ -9,7 +9,7 @@
 	"messages": {
 		"SettingsCalibrationDone": "Калібрування виконане!",
 		"SettingsCalibrationWarning": "Переконайтеся, що жало охололо до кімнатної температури, перш ніж продовжувати!",
-		"SettingsResetWarning": "Ви дійсно хочете скинути налаштування до значень за замовчуванням? <A - Так, В - Ні>",
+		"SettingsResetWarning": "Ви дійсно хочете скинути налаштування до значень за замовчуванням? (A=Так, В=Ні)",
 		"UVLOWarningString": "АККУМ--",
 		"UndervoltageString": "Низька напруга",
 		"InputVoltageString": "Жив.(B): ",
@@ -41,7 +41,7 @@
 			"USB-PD IC",
 			"не виявлено!"
 		],
-		"LockingKeysString": " ЗАБЛОК.",
+		"LockingKeysString": "ЗАБЛОК.",
 		"UnlockingKeysString": "РОЗБЛОК.",
 		"WarningKeysLockedString": "!ЗАБЛОК!"
 	},
@@ -49,14 +49,14 @@
 		"SettingRightChar": "П",
 		"SettingLeftChar": "Л",
 		"SettingAutoChar": "A",
-		"SettingFastChar": "Ш",
+		"SettingOffChar": "B",
 		"SettingSlowChar": "П",
 		"SettingMediumChar": "M",
-		"SettingOffChar": "B",
+		"SettingFastChar": "Ш",
+		"SettingStartNoneChar": "В",
 		"SettingStartSolderingChar": "П",
 		"SettingStartSleepChar": "О",
 		"SettingStartSleepOffChar": "К",
-		"SettingStartNoneChar": "В",
 		"SettingSensitivityOff": "В",
 		"SettingSensitivityLow": "Н",
 		"SettingSensitivityMedium": "С",
@@ -109,42 +109,42 @@
 				"Джерело",
 				"живлення"
 			],
-			"desc": "Встановлює напругу відсічки. <DC - 10V, 3S - 9.9V, 4S - 13.2V, 5S - 16.5V, 6S - 19.8V>"
+			"desc": "Встановлює напругу відсічки. (DC - 10V) (3S - 9.9V | 4S - 13.2V | 5S - 16.5V | 6S - 19.8V)"
 		},
 		"SleepTemperature": {
 			"text2": [
 				"Темпер.",
 				"сну"
 			],
-			"desc": "Температура режиму очікування <C°/F°>"
+			"desc": "Температура режиму очікування (C° | F°)"
 		},
 		"SleepTimeout": {
 			"text2": [
 				"Тайм-аут",
 				"сну"
 			],
-			"desc": "Час до переходу в режим очікування <Хвилини/Секунди>"
+			"desc": "Час до переходу в режим очікування (Хвилини | Секунди)"
 		},
 		"ShutdownTimeout": {
 			"text2": [
 				"Часу до",
 				"вимкнення"
 			],
-			"desc": "Час до вимкнення <Хвилини>"
+			"desc": "Час до вимкнення (Хвилини)"
 		},
 		"MotionSensitivity": {
 			"text2": [
 				"Чутливість",
 				"сенсору руху"
 			],
-			"desc": "Акселерометр <0 - Вимк. 1 - мін. чутливості 9 - макс. чутливості>"
+			"desc": "Акселерометр (0=Вимк. | 1=мін. чутливості | ... | 9=макс. чутливості)"
 		},
 		"TemperatureUnit": {
 			"text2": [
 				"Формат темпе-",
 				"ратури(C°/F°)"
 			],
-			"desc": "Одиниця виміру температури <C - Цельсій, F - Фаренгейт>"
+			"desc": "Одиниця виміру температури (C=Цельсій | F=Фаренгейт)"
 		},
 		"AdvancedIdle": {
 			"text2": [
@@ -158,7 +158,7 @@
 				"Автоповорот",
 				"екрану"
 			],
-			"desc": "Орієнтація дисплея <A - Автоповорот, Л - Лівша, П - Правша>"
+			"desc": "Орієнтація дисплея (П=Правша | Л=Лівша | A=Автоповорот)"
 		},
 		"BoostTemperature": {
 			"text2": [
@@ -172,7 +172,7 @@
 				"Гарячий",
 				"старт"
 			],
-			"desc": "Режим в якому запускається паяльник при ввімкненні <П=Пайка, О=Очікування, К=Очікування при кімн. темп., В=Вимк.>"
+			"desc": "Режим в якому запускається паяльник при ввімкненні (В=Вимк. | П=Пайка | О=Очікування | К=Очікування при кімн. темп.)"
 		},
 		"CooldownBlink": {
 			"text2": [
@@ -214,7 +214,7 @@
 				"Швидкість",
 				"тексту"
 			],
-			"desc": "Швидкість прокрутки тексту <П=повільно, Ш=швидко>"
+			"desc": "Швидкість прокрутки тексту (П=повільно | Ш=швидко)"
 		},
 		"QCMaxVoltage": {
 			"text2": [
@@ -228,7 +228,7 @@
 				"Макс.",
 				"потуж."
 			],
-			"desc": "Макс. потужність, яку може використовувати паяльник <Ват>"
+			"desc": "Макс. потужність, яку може використовувати паяльник (Ват)"
 		},
 		"ReverseButtonTempChange": {
 			"text2": [
@@ -263,21 +263,21 @@
 				"Чутливість",
 				"Ефекту Холла"
 			],
-			"desc": "Чутливість датчика ефекту Холла при виявленні сну <В=Вимк,Н=Низький,С=Середній,М=Макс>"
+			"desc": "Чутливість датчика ефекту Холла при виявленні сну (В=Вимк | Н=Низький | С=Середній | М=Макс)"
 		},
 		"LockingMode": {
 			"text2": [
 				"Дозволити",
 				"блок. кнопок"
 			],
-			"desc": "Під час пайки тривале натискання обох кнопок заблокує їх <В=Вимк, Т=Тільки турбо, П=Повне>"
+			"desc": "Під час пайки тривале натискання обох кнопок заблокує їх (В=Вимк | Т=Тільки турбо | П=Повне)"
 		},
 		"MinVolCell": {
 			"text2": [
 				"Мін.",
 				"напруга"
 			],
-			"desc": "Мінімальна дозволена напруга на комірку <В вольтах> <3S: 3.0V - 3.7V, 4/5/6S: 2.4V - 3.7V>"
+			"desc": "Мінімальна дозволена напруга на комірку (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)"
 		},
 		"AnimLoop": {
 			"text2": [
@@ -291,25 +291,25 @@
 				"Швидкість",
 				"анімації"
 			],
-			"desc": "Швидкість анімації іконок у головному меню <Мілісекунди> <В=Вимк, Н=Низькa, С=Середня, М=Макс>"
+			"desc": "Швидкість анімації іконок у головному меню (Мілісекунди) (В=Вимк | Н=Низькa | С=Середня | М=Макс)"
 		},
 		"PowerPulseWait": {
 			"text2": [
-				"Power pulse",
-				"wait time"
+				"Час між імп.",
+				"напруги"
 			],
-			"desc": "Time to wait before triggering every keep-awake pulse (x 2.5s)"
+			"desc": "Час між імпульсами напруги яка не дає PowerBank-у заснути (x 2.5с)"
 		},
 		"PowerPulseDuration": {
 			"text2": [
-				"Power pulse",
-				"duration"
+				"Тривалість",
+				"імп. напруги"
 			],
-			"desc": "Keep-awake-pulse duration (x 250ms)"
+			"desc": "Тривалість імпульсу напруги яка не дає PowerBank-у заснути (x 250мс)"
 		},
 		"LanguageSwitch": {
 			"text2": [
-				"Language:",
+				"Мова:",
 				" UK  Українська"
 			],
 			"desc": ""

Translations/translation_YUE_HK.json

@@ -46,14 +46,14 @@
 		"SettingRightChar": "右",
 		"SettingLeftChar": "左",
 		"SettingAutoChar": "自",
-		"SettingFastChar": "快",
+		"SettingOffChar": "關",
 		"SettingSlowChar": "慢",
 		"SettingMediumChar": "中",
-		"SettingOffChar": "關",
+		"SettingFastChar": "快",
+		"SettingStartNoneChar": "無",
 		"SettingStartSolderingChar": "焊",
 		"SettingStartSleepChar": "待",
 		"SettingStartSleepOffChar": "室",
-		"SettingStartNoneChar": "無",
 		"SettingSensitivityOff": "關",
 		"SettingSensitivityLow": "低",
 		"SettingSensitivityMedium": "中",
@@ -116,7 +116,7 @@
 		},
 		"DisplayRotation": {
 			"text2": "畫面方向",
-			"desc": "自=自動 | 左=使用左手 | 右=使用右手"
+			"desc": "右=使用右手 | 左=使用左手 | 自=自動"
 		},
 		"BoostTemperature": {
 			"text2": "增熱温度",

Translations/translation_ZH_CN.json

@@ -46,14 +46,14 @@
 		"SettingRightChar": "右",
 		"SettingLeftChar": "左",
 		"SettingAutoChar": "自",
-		"SettingFastChar": "快",
+		"SettingOffChar": "关",
 		"SettingSlowChar": "慢",
 		"SettingMediumChar": "中",
-		"SettingOffChar": "关",
+		"SettingFastChar": "快",
+		"SettingStartNoneChar": "无",
 		"SettingStartSolderingChar": "焊",
 		"SettingStartSleepChar": "待",
 		"SettingStartSleepOffChar": "室",
-		"SettingStartNoneChar": "无",
 		"SettingSensitivityOff": "关",
 		"SettingSensitivityLow": "低",
 		"SettingSensitivityMedium": "中",
@@ -116,7 +116,7 @@
 		},
 		"DisplayRotation": {
 			"text2": "画面方向",
-			"desc": "自=自动 | 左=使用左手 | 右=使用右手"
+			"desc": "右=使用右手 | 左=使用左手 | 自=自动"
 		},
 		"BoostTemperature": {
 			"text2": "增热温度",

Translations/translation_ZH_TW.json

@@ -46,14 +46,14 @@
 		"SettingRightChar": "右",
 		"SettingLeftChar": "左",
 		"SettingAutoChar": "自",
-		"SettingFastChar": "快",
+		"SettingOffChar": "關",
 		"SettingSlowChar": "慢",
 		"SettingMediumChar": "中",
-		"SettingOffChar": "關",
+		"SettingFastChar": "快",
+		"SettingStartNoneChar": "無",
 		"SettingStartSolderingChar": "焊",
 		"SettingStartSleepChar": "待",
 		"SettingStartSleepOffChar": "室",
-		"SettingStartNoneChar": "無",
 		"SettingSensitivityOff": "關",
 		"SettingSensitivityLow": "低",
 		"SettingSensitivityMedium": "中",
@@ -116,7 +116,7 @@
 		},
 		"DisplayRotation": {
 			"text2": "畫面方向",
-			"desc": "自=自動 | 左=使用左手 | 右=使用右手"
+			"desc": "右=使用右手 | 左=使用左手 | 自=自動"
 		},
 		"BoostTemperature": {
 			"text2": "增熱溫度",