sv/IronOS
1
0
Fork 0
forked from me/IronOS
Code Pull Requests Activity

Update Flashing.md

Browse Source
This commit is contained in:
River B
2022-03-12 02:28:30 -08:00
committed by GitHub
parent 1fbc3be223
commit 4161b752d7
1 changed files with 26 additions and 24 deletions
Download Patch File Download Diff File Expand all files Collapse all files

50
Documentation/Flashing.md
View File

@@ -130,21 +130,22 @@ Note: if you are using an older release of `dfu-util` and you do not see `alt=0,
Two Options for Windows
### Option 1: use command line `dfu-util` similar to above for Linux / Mac.
### Option 1: use command line
#### Steps
### Steps
⛔ Do not use the DC power jack while updating firmware or you may destroy your PC. ⛔
1. Download and extract the firmware package from Github [IronOS Releases](https://github.com/Ralim/IronOS/releases).
1. Using command line `dfu-util` is similar to above for Linux / Mac.
2. Highly recommended updating `dfu-util` to the newest version.
3. Enter DFU mode: press and hold (-) button at the back of the iron (do not release).
4. Connect USB to PC, and USB-C to the back of Pinecil, keep holding (-) button down.
5. Screen will stay **black/off** to indicate the Pinecil is in DFU mode. This is normal.
6. After the USB cable is connected at both ends, wait ~10 seconds more, then release the (-) button.
7. Open PowerShell or Command window.
8. Change to the directory of the unzipped firmware files
9. Using `dfu-util,` flash the firmware using a command like this:
3. Download and extract the firmware package from Github [IronOS Releases](https://github.com/Ralim/IronOS/releases).
4. Enter DFU mode: press and hold (-) button at the back of the iron (do not release).
5. Connect USB to PC, and USB-C to the back of Pinecil, keep holding (-) button down.
6. Screen will stay **black/off** to indicate the Pinecil is in DFU mode. This is normal.
7. After the USB cable is connected at both ends, wait ~10 seconds more, then release the (-) button.
8. Open PowerShell or Command window.
9. Change to the directory of the unzipped firmware files
10. Using `dfu-util,` flash the firmware using a command like this:
```
dfu-util -D Pinecil_EN.dfu
@@ -152,29 +153,30 @@ dfu-util -D Pinecil_EN.dfu
- If you have errors, see Troubleshooting [above](https://github.com/Ralim/IronOS/blob/7cb83850a8177eba5e7edbce4717b7aefd5938a0/Documentation/Flashing.md#troubleshooting).
### Option 2: if you are uncomfortable with the command line, the easiest tool (besides Pine64 Updater) is the chip vendors gui tool/drivers.
### Option 2: Use the gui tool/drivers from chip vendor
#### Steps
### Steps
⛔ Do not use the DC power jack while updating firmware or you may destroy your PC. ⛔
1. Download and extract the firmware package from Github [IronOS Releases](https://github.com/Ralim/IronOS/releases).
2. 2. Download both the `GD32 MCU DFU TOOL` and the `GD32 Dfu Drivers`.
1. If you are uncomfortable with the command line, then this chip vendor supplied gui tool/drivers is an option.
2. Download and extract the firmware package from Github [IronOS Releases](https://github.com/Ralim/IronOS/releases).
3. Download both the `GD32 MCU DFU TOOL` and the `GD32 Dfu Drivers`.
- GD32 DFU Tool [here](http://www.gd32mcu.com/en/download?kw=GD32+MCU+Dfu+Tool&lan=en).
- If the link breaks, search for "GD32 MCU Dfu Tool" at this [link](http://www.gd32mcu.com/en/download/).
- GD32 DFU Drivers [here](http://www.gd32mcu.com/en/download?kw=GD32+Dfu+Drivers&lan=en)
- If the link breaks, search for "GD32 Dfu Drivers" at this [link](http://www.gd32mcu.com/en/download/).
- Check properties of both downloads, tick Unblock if needed, then Unzip
3. Install the drivers and the GD32 DFU tool (ignore prompts to update the tool).
4. Enter DFU mode: press and hold (-) button at the back of Pinecil (do not release).
5. Connect Pinecil to a PC via USB cable (do not release the (-) yet).
6. Screen will stay **black/off** to indicate the Pinecil is in DFU mode. This is normal.
7. You may hear a beep from Windows as it connects to Pinecil in DFU mode.
8. If you see windows notification that it `does not recognize Usb device`, then you didn't connect, repeat step 3-8.
9. Open the GD32 DFU Tool (ignore prompts to update tool).
10. At the top of the DFU tool, you should see `GD DFU DEVICE 1` appear if you successfully connected Pinecil.
11. If DFU Device box at top is blank, then Pinecil is not connected in DFU mode, repeat steps 3-11.
12. If it has been more than 10 seconds since you connected the USB cable, Release the (-) button. (don't use Upload from Device section)
4. Install the drivers and the GD32 DFU tool (ignore prompts to update the tool).
5. Enter DFU mode: press and hold (-) button at the back of Pinecil (do not release).
6. Connect Pinecil to a PC via USB cable (do not release the (-) yet).
7. Screen will stay **black/off** to indicate the Pinecil is in DFU mode. This is normal.
8. You may hear a beep from Windows as it connects to Pinecil in DFU mode.
9. If you see windows notification that it `does not recognize Usb device`, then you didn't connect, repeat step 3-8.
10. Open the GD32 DFU Tool (ignore prompts to update tool).
11. At the top of the DFU tool, you should see `GD DFU DEVICE 1` appear if you successfully connected Pinecil.
12. If DFU Device box at top is blank, then Pinecil is not connected in DFU mode, repeat steps 3-11.
13. If it has been more than 10 seconds since you connected the USB cable, Release the (-) button. (don't use Upload from Device section)
14. Select `Download to device` > Open > Browse to folder dyou unziped in step 2.
15. Select the `hex` file for language. English is Pinecil_EN.hex , tick `Verify after download`.
16. Click `OK` at bottom. After a few minutes you will see 0-100%, Download successfully! Click `Leave DFU` at the top.