Import up/down indicator from miniware

Closes #3 with nicer heating display

workspace/ts100/inc/Font.h

@@ -163,4 +163,30 @@ const uint8_t Iron_RightArrow_DOWN[] = {
 		0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
 };
 
+const uint8_t SymbolTable[]={
+
+		0x0E,0x11,0x11,0x0E,0xE0,0xF8,0x0C,0x06,0x03,0x01,0x01,0x01,0x01,0x02,0x1E,0x00,
+		0x00,0x00,0x00,0x00,0x0F,0x3F,0x70,0xC0,0x80,0x80,0x80,0x80,0x80,0x40,0x20,0x00,	// Degrees C
+
+		0x08,0x14,0x22,0x14,0x08,0x02,0x02,0xFE,0x06,0x02,0x02,0x02,0xC2,0x02,0x06,0x1E,
+		0x00,0x00,0x00,0x00,0x00,0x80,0x80,0xFF,0x81,0x81,0x01,0x01,0x03,0x00,0x00,0x00,	// Degrees F
+
+		0xC0,0x30,0x08,0x04,0x04,0x02,0xFA,0xAA,0xFA,0x02,0x04,0x04,0x08,0x30,0xC0,0x00,
+	 	0x07,0x18,0x20,0x40,0x58,0xA4,0xDB,0xDE,0xDB,0xA4,0x58,0x40,0x20,0x18,0x07,0x00, 	// Temp symbol
+
+		0x00,0xF0,0xF0,0x00,0x00,0xF0,0xF0,0xF0,0x00,0x00,0xFC,0xF8,0xF0,0xE0,0xC0,0x80, 	//Right Arrow
+		0x00,0x0F,0x0F,0x00,0x00,0x0F,0x0F,0x0F,0x00,0x00,0x3F,0x1F,0x0F,0x07,0x03,0x01,
+
+		0x80,0xC0,0xE0,0xF0,0xF8,0xFC,0x00,0x00,0xF0,0xF0,0xF0,0x00,0x00,0xF0,0xF0,0x00,	//Left Arrow
+		0x01,0x03,0x07,0x0F,0x1F,0x3F,0x00,0x00,0x0F,0x0F,0x0F,0x00,0x00,0x0F,0x0F,0x00,
+
+		0x11,0x33,0x66,0xCC,0x98,0x30,0x60,0xC0,0xC0,0x60,0x30,0x98,0xCC,0x66,0x33,0x11,
+		0x01,0x03,0x06,0x0C,0x19,0x33,0x66,0xCC,0xCC,0x66,0x33,0x19,0x0C,0x06,0x03,0x01,	//Down Chevron
+
+		0x80,0xC0,0x60,0x30,0x98,0xCC,0x66,0x33,0x33,0x66,0xCC,0x98,0x30,0x60,0xC0,0x80,
+		0x88,0xCC,0x66,0x33,0x19,0x0C,0x06,0x03,0x03,0x06,0x0C,0x19,0x33,0x66,0xCC,0x88,	//Up Chevron
+
+		0x00,0x8C,0x8C,0x8C,0x8C,0x8C,0x8C,0x8C,0x8C,0x8C,0x8C,0x8C,0x8C,0x8C,0x8C,0x00, 	// Flat Lines
+		0x00,0x31,0x31,0x31,0x31,0x31,0x31,0x31,0x31,0x31,0x31,0x31,0x31,0x31,0x31,0x00,
+};
 #endif /* FONT_H_ */

workspace/ts100/inc/Oled.h

@@ -25,7 +25,9 @@ void Clear_Screen(void);//Clear the screen
 void OLED_DrawString(char* string, uint8_t length);
 void OLED_DrawChar(char c, uint8_t x);
 void OLED_DrawTwoNumber(uint8_t in, uint8_t x);
+void OLED_BlankSlot(uint8_t xStart,uint8_t width);
 void OLED_DrawThreeNumber(uint16_t in, uint8_t x);
 void OLED_DrawIDLELogo();
+void OLED_DrawSymbol(uint8_t x,uint8_t symbol);
 #endif
 /******************************** END OF FILE *********************************/

workspace/ts100/src/Main.c

@@ -37,7 +37,7 @@ void setup() {
 	readIronTemp(systemSettings.tempCalibration, 0,0); 	//load the default calibration value
 	Init_Oled(systemSettings.flipDisplay); 				//Init the OLED display
 
-	OLED_DrawString("VER 1.05", 8); 					//
+	OLED_DrawString("VER 1.06", 8); 					//
 	delayMs(800);										//Pause to show version number
 	Start_Watchdog(1000); 								//start the system watch dog as 1 second timeout
 }

workspace/ts100/src/Modes.c

@@ -281,41 +281,43 @@ void DrawUI() {
 			Oled_DisplayOff();
 		} else {
 			Oled_DisplayOn();
-			//OLED_DrawString("  IDLE  ", 8);		//write the word IDLE
-			OLED_DrawIDLELogo();
+			OLED_DrawIDLELogo();		//Draw the icons for prompting the user
 		}
 		break;
 	case SOLDERING:
 		//The user is soldering
 	{
-		if (getIronTimer() == 0) {
-			OLED_DrawChar('C', 5);
-		} else {
-			if (getIronTimer() < 900) {
-				OLED_DrawChar(' ', 5);
-			} else {		//we are heating
-				OLED_DrawChar('H', 5);
-			}
-		}
 		drawTemp(temp, 0);
 		OLED_DrawChar(' ', 3);
-		OLED_DrawChar(' ', 4);
-		OLED_DrawChar(' ', 6);
-		OLED_DrawChar(' ', 7);
 
+		OLED_BlankSlot(6 * 12 + 16, 24 - 16);//blank out the tail after the arrows
+		OLED_BlankSlot(4 * 12 + 16, 24 - 16);//blank out the tail after the temp
+		if (getIronTimer() == 0) {
+			OLED_DrawSymbol(6, 5);
+		} else {
+			if (getIronTimer() < 900) {
+				OLED_DrawSymbol(6, 7);
+			} else {		//we are heating
+				//OLED_DrawChar('H', 5);
+				OLED_DrawSymbol(6, 6);
+			}
+		}
+		if (systemSettings.displayTempInF) {
+			OLED_DrawSymbol(4, 1);
+		} else {
+			OLED_DrawSymbol(4, 0);
+		}
 	}
 		break;
 	case TEMP_ADJ:
 		//We are prompting the user to change the temp so we draw the current setpoint temp
 		//With the nifty arrows
-
 		OLED_DrawChar(' ', 0);
 		OLED_DrawChar('<', 1);
 		drawTemp(systemSettings.SolderingTemp, 2);
 		OLED_DrawChar(' ', 5);
-		OLED_DrawChar(' ', 6);
-		OLED_DrawChar('>', 7);
-
+		OLED_DrawChar(' ', 7);
+		OLED_DrawChar('>', 6);
 		break;
 	case SETTINGS:
 		//We are prompting the user the setting name
@@ -383,7 +385,7 @@ void DrawUI() {
 		break;
 	case COOLING:
 		//We are warning the user the tip is cooling
-		OLED_DrawString("COOL", 4);
+		OLED_DrawString("COOL ", 5);
 		drawTemp(temp, 5);
 		break;
 	case UVLOWARN:

workspace/ts100/src/Oled.c

@@ -207,6 +207,14 @@ void OLED_DrawChar(char c, uint8_t x) {
 
 	Oled_DrawArea(x, 0, FONT_WIDTH, 16, (u8*) ptr);
 }
+
+void OLED_BlankSlot(uint8_t xStart, uint8_t width) {
+	u8* ptr = (u8*) FONT;
+	ptr += (36) * (FONT_WIDTH * 2);
+
+	Oled_DrawArea(xStart, 0, width, 16, (u8*) ptr);
+}
+
 /*
  * Draw a 2 digit number to the display at letter slot x
  */
@@ -254,3 +262,7 @@ void OLED_DrawIDLELogo() {
 	}
 
 }
+
+void OLED_DrawSymbol(uint8_t x, uint8_t symbol) {
+	Oled_DrawArea(x * FONT_WIDTH, 0, 16, 16, SymbolTable + (symbol * 32));
+}