me/IronOS
1
0
Fork 1
mirror of https://github.com/Ralim/IronOS.git synced 2025-02-26 07:53:55 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity

Use both buttons to exit soldering instead of B

Browse Source
This commit is contained in:
Ben V. Brown
2017-01-22 21:19:26 +11:00
parent 0bbdda5b55
commit b7e4249d2e
3 changed files with 19 additions and 16 deletions
Download Patch File Download Diff File Expand all files Collapse all files

1
workspace/ts100/.gitignore vendored
View File

@@ -1 +1,2 @@
/Debug/
/Release/

28
workspace/ts100/src/Modes.c
View File

@@ -32,16 +32,18 @@ void ProcessUI() {
break;
case SOLDERING:
//We need to check the buttons if we need to jump out
if (Buttons & BUT_A) {
//A key pressed so we are moving to temp set
if (Buttons == BUT_A || Buttons == BUT_B) {
//A or B key pressed so we are moving to temp set
operatingMode = TEMP_ADJ;
resetLastButtonPress();
resetButtons();
} else if (Buttons & BUT_B) {
//B Button was pressed so we are moving back to idle
operatingMode = COOLING;
resetLastButtonPress();
resetButtons();
} else if (Buttons == (BUT_A | BUT_B)) {
if (millis() - getLastButtonPress() > 1000) {
//Both buttons were pressed, exit back to the cooling screen
operatingMode = COOLING;
resetLastButtonPress();
resetButtons();
}
} else {
//We need to check the timer for movement in case we need to goto idle
if (systemSettings.movementEnabled)
@@ -168,15 +170,15 @@ void ProcessUI() {
setIronTimer(0); //turn off heating
//This mode warns the user the iron is still cooling down
uint16_t temp = readIronTemp(0, 1); //take a new reading as the heater code is not taking new readings
if (temp < 500) { //if the temp is < 50C then we can go back to IDLE
if (temp < 400) { //if the temp is < 40C then we can go back to IDLE
operatingMode = STARTUP;
resetLastButtonPress();
resetButtons();
} else { //we check if the user has pushed a button to ack
if ((millis() - getLastButtonPress() > 200)
&& (millis() - getLastButtonPress() < 2000)) {
if (getButtons() && (BUT_A | BUT_B)) {
//A button was pushed
if ((millis() - getLastButtonPress() > 800)
&& (millis() - getLastButtonPress() < 5000)) {
if (getButtons() & (BUT_A | BUT_B)) {
//Either button was pushed
operatingMode = STARTUP;
resetLastButtonPress();
resetButtons();
@@ -304,7 +306,7 @@ void DrawUI() {
break;
case COOLING:
//We are warning the user the tip is cooling
OLED_DrawString("COOL", 3);
OLED_DrawString("COOL", 4);
drawTemp(temp, 4);
break;
case UVLOWARN:

6
workspace/ts100/src/Oled.c
View File

@@ -13,7 +13,7 @@
#include "I2C.h"
#include "Font.h"
u8 displayOffset = 32;
int8_t displayOffset = 32;
/*Setup params for the OLED screen*/
/*http://www.displayfuture.com/Display/datasheet/controller/SSD1307.pdf*/
/*All commands are prefixed with 0x80*/
@@ -96,7 +96,7 @@ u8* Data_Command(u8 length, u8* data) {
void Set_ShowPos(u8 x, u8 y) {
u8 pos_param[8] = { 0x80, 0xB0, 0x80, 0x21, 0x80, 0x00, 0x80, 0x7F };
//page 0, start add = x(below) through to 0x7F (aka 127)
pos_param[5] = x + displayOffset;/*Display offset ==0 for Lefty, == 32 fo righty*/
pos_param[5] = x + displayOffset;/*Display offset ==0 for Lefty, == 32 for righty*/
pos_param[1] += y;
I2C_PageWrite(pos_param, 8, DEVICEADDR_OLED);
}
@@ -161,7 +161,7 @@ void Init_Oled(void) {
*******************************************************************************/
void Clear_Screen(void) {
u8 tx_data[128];
memset(&tx_data[0], 0, 128);
memset(tx_data, 0, 128);
for (u8 i = 0; i < 2; i++) {
Oled_DrawArea(0, i * 8, 128, 8, tx_data);
}