Pinecil V2 (#1341)

* Add SDK

* fork

* massaging makefile

* Drop git module

* Bring in sdk as its broken

Far, Far to much crap to fix with regex now

* Remove bl706

* rf_para_flash_t is missing defs

* Remove crapton of junk

* Remove yet more

* Poking I2C

* Update peripheral_config.h

* Update pinmux_config.h

* Update preRTOS.cpp

* Update main.hpp

* Setup template

* Verbose boot

* I2C ish

* Update I2C_Wrapper.cpp

* Update main.cpp

* Turn off I2C reading for now

* Display running

* Roughing out scheduling timer0

* Starting ADC setup

* Working scheduling of ADC 🎉

* Format adc headers

* Update IRQ.cpp

* Buttons working

* Slow down I2C

* Poking IRQ

* Larger stack required

* Accel on

* Trying to chase down why __libc_init_array isnt working yet

* Working c++

* Cleanup

* Bump stacks

* I2C wake part workaround

* Cleanup

* Working PWM init

* qc draft

* Hookup PWM

* Stable enough ADC

* ADC timing faster + timer without HAL

* Silence

* Remove boot banner

* Tuning in ADC

* Wake PID after ADC

* Remove unused hal

* Draft flash settings

* Working settings save & restore

* Update to prod model

* Cleanup

* NTC thermistor

* Correct adc gain

* Rough tip resistance progress

* Scratch out resistance awareness of the tip

* better adc settings

* Tweaking ADC

* ADC tweaking

* Make adc range scalable

* Update Dockerfile

* Update configuration.h

* Can read same ADC twice in a row

* ADC Setup

* Update PIDThread.cpp

* Lesser adc backoff

* Update USBPD.h

* Add device ID

* Update BSP_Power.h

* Update BSP.cpp

* DrawHex dynamicLength

* Shorter ID padding

* Show validation code

* tip measurement

* Create access for w0w1

* Expose w0 w1

* Enable debug

* crc32

* Device validation

* wip starting epr

* Logic refactor

* Safer PWM Init

* PD cleanups

* Update bl702_pwm.c

* Update power.cpp

* Update usb-pd

* io

* EPR decode

* Better gui for showing pd specs

* Rough handler for capabilities

* EPR

* Fix > 25V input

* Perform pow step after PPS

* Update BSP.cpp

* Fix timer output

* QC3

* Add tip resistance view

* Hold PD negotiation until detection is done for tip res

* Get Thermal mass

* Tip res =0 protection

* Update PIDThread.cpp

* Update GUIThread.cpp

* Rewrite tip resistance measurement

* Update GUIThread.cpp

* Fix fallback

* Far better tip resistance measurement

* Fix QC 0.6V D-

* Convert the interpolator to int32

* Correct the NTC lookup

* Update BSP.cpp

* Update Setup.cpp

* .

Update configuration #defines

More backported functions

* Update usb-pd

* More missed updates

* Refactor BSP

Magic BSP -> PinecilV2
Pine64 BSP -> Pinecil

Update Makefile

* Add Pinecilv2 to CI

* Pinecil v2 multi-lang

Update push.yml

* Update HallSensor.md

* Update README.md

* Fix wrong prestartcheck default

* Fix logo mapping

* Update Makefile

* Remove unused font block

* Style

* Style

* Remove unused timer funcs

* More culling TS80P

* Revert "More culling TS80P"

This reverts commit 2078b89be7.

* Revert "Remove unused timer funcs"

This reverts commit 0c693a89cc.

* Make VBus check maskable

* Remove DMA half transfer

* Drop using brightness and invert icons and go back to text

Saves flash space

* Refactor settings UI drawing descriptions

* Shorten setting function names

* Store bin file assets

* Fix MHP prestart
This commit is contained in:
Ben V. Brown
2022-08-19 15:39:37 +10:00
committed by GitHub
parent 61a679115d
commit 1fbcdcdf98
428 changed files with 165913 additions and 1380 deletions

View File

@@ -92,11 +92,14 @@ must be set in the compiler's include path. */
#endif
#ifdef __cplusplus
extern "C"
{
extern "C" {
#endif
#include "mpu_wrappers.h"
#define PRIVILEGED_FUNCTION
#define PRIVILEGED_DATA
#define FREERTOS_SYSTEM_CALL
#define portUSING_MPU_WRAPPERS 0
// #include "mpu_wrappers.h"
/*
* Setup the stack of a new task so it is ready to be placed under the
@@ -106,9 +109,9 @@ extern "C"
*/
#if (portUSING_MPU_WRAPPERS == 1)
#if (portHAS_STACK_OVERFLOW_CHECKING == 1)
StackType_t *pxPortInitialiseStack(StackType_t *pxTopOfStack, StackType_t *pxEndOfStack, TaskFunction_t pxCode, void *pvParameters, BaseType_t xRunPrivileged) PRIVILEGED_FUNCTION;
StackType_t *pxPortInitialiseStack(StackType_t *pxTopOfStack, StackType_t *pxEndOfStack, TaskFunction_t pxCode, void *pvParameters, BaseType_t xRunPrivileged) PRIVILEGED_FUNCTION;
#else
StackType_t *pxPortInitialiseStack(StackType_t *pxTopOfStack, TaskFunction_t pxCode, void *pvParameters, BaseType_t xRunPrivileged) PRIVILEGED_FUNCTION;
StackType_t *pxPortInitialiseStack(StackType_t *pxTopOfStack, TaskFunction_t pxCode, void *pvParameters, BaseType_t xRunPrivileged) PRIVILEGED_FUNCTION;
#endif
#else
#if (portHAS_STACK_OVERFLOW_CHECKING == 1)
@@ -118,27 +121,25 @@ StackType_t *pxPortInitialiseStack(StackType_t *pxTopOfStack, TaskFunction_t pxC
#endif
#endif
/* Used by heap_5.c to define the start address and size of each memory region
/* Used by heap_5.c to define the start address and size of each memory region
that together comprise the total FreeRTOS heap space. */
typedef struct HeapRegion
{
uint8_t *pucStartAddress;
size_t xSizeInBytes;
} HeapRegion_t;
typedef struct HeapRegion {
uint8_t *pucStartAddress;
size_t xSizeInBytes;
} HeapRegion_t;
/* Used to pass information about the heap out of vPortGetHeapStats(). */
typedef struct xHeapStats
{
size_t xAvailableHeapSpaceInBytes; /* The total heap size currently available - this is the sum of all the free blocks, not the largest block that can be allocated. */
size_t xSizeOfLargestFreeBlockInBytes; /* The maximum size, in bytes, of all the free blocks within the heap at the time vPortGetHeapStats() is called. */
size_t xSizeOfSmallestFreeBlockInBytes; /* The minimum size, in bytes, of all the free blocks within the heap at the time vPortGetHeapStats() is called. */
size_t xNumberOfFreeBlocks; /* The number of free memory blocks within the heap at the time vPortGetHeapStats() is called. */
size_t xMinimumEverFreeBytesRemaining; /* The minimum amount of total free memory (sum of all free blocks) there has been in the heap since the system booted. */
size_t xNumberOfSuccessfulAllocations; /* The number of calls to pvPortMalloc() that have returned a valid memory block. */
size_t xNumberOfSuccessfulFrees; /* The number of calls to vPortFree() that has successfully freed a block of memory. */
} HeapStats_t;
/* Used to pass information about the heap out of vPortGetHeapStats(). */
typedef struct xHeapStats {
size_t xAvailableHeapSpaceInBytes; /* The total heap size currently available - this is the sum of all the free blocks, not the largest block that can be allocated. */
size_t xSizeOfLargestFreeBlockInBytes; /* The maximum size, in bytes, of all the free blocks within the heap at the time vPortGetHeapStats() is called. */
size_t xSizeOfSmallestFreeBlockInBytes; /* The minimum size, in bytes, of all the free blocks within the heap at the time vPortGetHeapStats() is called. */
size_t xNumberOfFreeBlocks; /* The number of free memory blocks within the heap at the time vPortGetHeapStats() is called. */
size_t xMinimumEverFreeBytesRemaining; /* The minimum amount of total free memory (sum of all free blocks) there has been in the heap since the system booted. */
size_t xNumberOfSuccessfulAllocations; /* The number of calls to pvPortMalloc() that have returned a valid memory block. */
size_t xNumberOfSuccessfulFrees; /* The number of calls to vPortFree() that has successfully freed a block of memory. */
} HeapStats_t;
/*
/*
* Used to define multiple heap regions for use by heap_5.c. This function
* must be called before any calls to pvPortMalloc() - not creating a task,
* queue, semaphore, mutex, software timer, event group, etc. will result in
@@ -149,35 +150,35 @@ that together comprise the total FreeRTOS heap space. */
* terminated by a HeapRegions_t structure that has a size of 0. The region
* with the lowest start address must appear first in the array.
*/
void vPortDefineHeapRegions(const HeapRegion_t *const pxHeapRegions) PRIVILEGED_FUNCTION;
void vPortDefineHeapRegions(const HeapRegion_t *const pxHeapRegions) PRIVILEGED_FUNCTION;
/*
/*
* Returns a HeapStats_t structure filled with information about the current
* heap state.
*/
void vPortGetHeapStats(HeapStats_t *pxHeapStats);
void vPortGetHeapStats(HeapStats_t *pxHeapStats);
/*
/*
* Map to the memory management routines required for the port.
*/
void *pvPortMalloc(size_t xSize) PRIVILEGED_FUNCTION;
void vPortFree(void *pv) PRIVILEGED_FUNCTION;
void vPortInitialiseBlocks(void) PRIVILEGED_FUNCTION;
size_t xPortGetFreeHeapSize(void) PRIVILEGED_FUNCTION;
size_t xPortGetMinimumEverFreeHeapSize(void) PRIVILEGED_FUNCTION;
void *pvPortMalloc(size_t xSize) PRIVILEGED_FUNCTION;
void vPortFree(void *pv) PRIVILEGED_FUNCTION;
void vPortInitialiseBlocks(void) PRIVILEGED_FUNCTION;
size_t xPortGetFreeHeapSize(void) PRIVILEGED_FUNCTION;
size_t xPortGetMinimumEverFreeHeapSize(void) PRIVILEGED_FUNCTION;
/*
/*
* Setup the hardware ready for the scheduler to take control. This generally
* sets up a tick interrupt and sets timers for the correct tick frequency.
*/
BaseType_t xPortStartScheduler(void) PRIVILEGED_FUNCTION;
BaseType_t xPortStartScheduler(void) PRIVILEGED_FUNCTION;
/*
/*
* Undo any hardware/ISR setup that was performed by xPortStartScheduler() so
* the hardware is left in its original condition after the scheduler stops
* executing.
*/
void vPortEndScheduler(void) PRIVILEGED_FUNCTION;
void vPortEndScheduler(void) PRIVILEGED_FUNCTION;
/*
* The structures and methods of manipulating the MPU are contained within the
@@ -187,8 +188,8 @@ that together comprise the total FreeRTOS heap space. */
* contained in xRegions.
*/
#if (portUSING_MPU_WRAPPERS == 1)
struct xMEMORY_REGION;
void vPortStoreTaskMPUSettings(xMPU_SETTINGS *xMPUSettings, const struct xMEMORY_REGION *const xRegions, StackType_t *pxBottomOfStack, uint32_t ulStackDepth) PRIVILEGED_FUNCTION;
struct xMEMORY_REGION;
void vPortStoreTaskMPUSettings(xMPU_SETTINGS *xMPUSettings, const struct xMEMORY_REGION *const xRegions, StackType_t *pxBottomOfStack, uint32_t ulStackDepth) PRIVILEGED_FUNCTION;
#endif
#ifdef __cplusplus