Pinecil V2 (#1341)

* Add SDK

* fork

* massaging makefile

* Drop git module

* Bring in sdk as its broken

Far, Far to much crap to fix with regex now

* Remove bl706

* rf_para_flash_t is missing defs

* Remove crapton of junk

* Remove yet more

* Poking I2C

* Update peripheral_config.h

* Update pinmux_config.h

* Update preRTOS.cpp

* Update main.hpp

* Setup template

* Verbose boot

* I2C ish

* Update I2C_Wrapper.cpp

* Update main.cpp

* Turn off I2C reading for now

* Display running

* Roughing out scheduling timer0

* Starting ADC setup

* Working scheduling of ADC 🎉

* Format adc headers

* Update IRQ.cpp

* Buttons working

* Slow down I2C

* Poking IRQ

* Larger stack required

* Accel on

* Trying to chase down why __libc_init_array isnt working yet

* Working c++

* Cleanup

* Bump stacks

* I2C wake part workaround

* Cleanup

* Working PWM init

* qc draft

* Hookup PWM

* Stable enough ADC

* ADC timing faster + timer without HAL

* Silence

* Remove boot banner

* Tuning in ADC

* Wake PID after ADC

* Remove unused hal

* Draft flash settings

* Working settings save & restore

* Update to prod model

* Cleanup

* NTC thermistor

* Correct adc gain

* Rough tip resistance progress

* Scratch out resistance awareness of the tip

* better adc settings

* Tweaking ADC

* ADC tweaking

* Make adc range scalable

* Update Dockerfile

* Update configuration.h

* Can read same ADC twice in a row

* ADC Setup

* Update PIDThread.cpp

* Lesser adc backoff

* Update USBPD.h

* Add device ID

* Update BSP_Power.h

* Update BSP.cpp

* DrawHex dynamicLength

* Shorter ID padding

* Show validation code

* tip measurement

* Create access for w0w1

* Expose w0 w1

* Enable debug

* crc32

* Device validation

* wip starting epr

* Logic refactor

* Safer PWM Init

* PD cleanups

* Update bl702_pwm.c

* Update power.cpp

* Update usb-pd

* io

* EPR decode

* Better gui for showing pd specs

* Rough handler for capabilities

* EPR

* Fix > 25V input

* Perform pow step after PPS

* Update BSP.cpp

* Fix timer output

* QC3

* Add tip resistance view

* Hold PD negotiation until detection is done for tip res

* Get Thermal mass

* Tip res =0 protection

* Update PIDThread.cpp

* Update GUIThread.cpp

* Rewrite tip resistance measurement

* Update GUIThread.cpp

* Fix fallback

* Far better tip resistance measurement

* Fix QC 0.6V D-

* Convert the interpolator to int32

* Correct the NTC lookup

* Update BSP.cpp

* Update Setup.cpp

* .

Update configuration #defines

More backported functions

* Update usb-pd

* More missed updates

* Refactor BSP

Magic BSP -> PinecilV2
Pine64 BSP -> Pinecil

Update Makefile

* Add Pinecilv2 to CI

* Pinecil v2 multi-lang

Update push.yml

* Update HallSensor.md

* Update README.md

* Fix wrong prestartcheck default

* Fix logo mapping

* Update Makefile

* Remove unused font block

* Style

* Style

* Remove unused timer funcs

* More culling TS80P

* Revert "More culling TS80P"

This reverts commit 2078b89be7.

* Revert "Remove unused timer funcs"

This reverts commit 0c693a89cc.

* Make VBus check maskable

* Remove DMA half transfer

* Drop using brightness and invert icons and go back to text

Saves flash space

* Refactor settings UI drawing descriptions

* Shorten setting function names

* Store bin file assets

* Fix MHP prestart

source/Core/BSP/MHP30/BSP.cpp

@@ -26,7 +26,7 @@ void resetWatchdog() { HAL_IWDG_Refresh(&hiwdg); }
 #ifdef TEMP_NTC
 // Lookup table for the NTC
 // Stored as ADCReading,Temp in degC
-static const uint16_t NTCHandleLookup[] = {
+static const int32_t NTCHandleLookup[] = {
     // ADC Reading , Temp in Cx10
     808,   1600, //
     832,   1590, //
@@ -425,7 +425,7 @@ bool isTipDisconnected() {
 
 uint8_t preStartChecks() {
   performTipMeasurementStep(false);
-  return tipMeasurementOccuring ? 1 : 0;
+  return tipMeasurementOccuring ? 0 : 1;
 }
 void setBuzzer(bool on) {
   if (on) {
@@ -474,4 +474,8 @@ void setStatusLED(const enum StatusLED state) {
 uint64_t getDeviceID() {
   //
   return HAL_GetUIDw0() | ((uint64_t)HAL_GetUIDw1() << 32);
-}
+}
+
+uint8_t preStartChecksDone() { return 1; }
+
+uint8_t getTipThermalMass() { return TIP_THERMAL_MASS; }

source/Core/BSP/MHP30/Vendor/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.c

@@ -175,11 +175,11 @@
  * @retval None
  */
 void HAL_GPIO_Init(GPIO_TypeDef *GPIOx, GPIO_InitTypeDef *GPIO_Init) {
-  uint32_t position = 0x00u;
-  uint32_t ioposition;
-  uint32_t iocurrent;
-  uint32_t temp;
-  uint32_t config = 0x00u;
+  uint32_t       position = 0x00u;
+  uint32_t       ioposition;
+  uint32_t       iocurrent;
+  uint32_t       temp;
+  uint32_t       config = 0x00u;
   __IO uint32_t *configregister; /* Store the address of CRL or CRH register based on pin number */
   uint32_t       registeroffset; /* offset used during computation of CNF and MODE bits placement inside CRL or CRH register */
 
@@ -326,9 +326,9 @@ void HAL_GPIO_Init(GPIO_TypeDef *GPIOx, GPIO_InitTypeDef *GPIO_Init) {
  * @retval None
  */
 void HAL_GPIO_DeInit(GPIO_TypeDef *GPIOx, uint32_t GPIO_Pin) {
-  uint32_t position = 0x00u;
-  uint32_t iocurrent;
-  uint32_t tmp;
+  uint32_t       position = 0x00u;
+  uint32_t       iocurrent;
+  uint32_t       tmp;
   __IO uint32_t *configregister; /* Store the address of CRL or CRH register based on pin number */
   uint32_t       registeroffset;
 

source/Core/BSP/MHP30/configuration.h

@@ -74,6 +74,9 @@
 #define POWER_PULSE_WAIT_MAX     9   // 9*2.5s = 22.5 seconds
 #define POWER_PULSE_DURATION_MAX 9   // 9*250ms = 2.25 seconds
 
+#define ADC_MAX_READING (4096 * 8) // Maximum reading of the adc
+#define ADC_VDD_MV      3300       // ADC max reading millivolts
+
 #ifdef MODEL_TS100
 #define POWER_PULSE_DEFAULT 0
 #else
@@ -146,6 +149,7 @@
 #define BATTFILTERDEPTH 8
 #define OLED_I2CBB
 #define ACCEL_EXITS_ON_MOVEMENT
+#define NEEDS_VBUS_PROBE 0
 
 #define HARDWARE_MAX_WATTAGE_X10 650
 #define TIP_THERMAL_MASS         65 // TODO, needs refinement