b364fb3f8e
* S allius/issue117 (#118) * add shutdown flag * add more register definitions * add start commando for client side connections * add first support for port 8899 * fix shutdown * add client_mode configuration * read client_mode config to setup inverter connections * add client_mode connections over port 8899 * add preview build * Update README.md describe the new client-mode over port 8899 for GEN3PLUS * MODBUS: the last digit of the inverter version is a hexadecimal number (#121) * S allius/issue117 (#122) * add shutdown flag * add more register definitions * add start commando for client side connections * add first support for port 8899 * fix shutdown * add client_mode configuration * read client_mode config to setup inverter connections * add client_mode connections over port 8899 * add preview build * add documentation for client_mode * catch os error and log thme with DEBUG level * update changelog * make the maximum output coefficient configurable (#124) * S allius/issue120 (#126) * add config option to disable the modbus polling * read more modbus regs in polling mode * extend connection timeouts if polling mode is disabled * update changelog * S allius/issue125 (#127) * fix linter warning * move sequence diagramm to wiki * catch asyncio.CancelledError * S allius/issue128 (#130) * set Register.NO_INPUTS fix to 4 for GEN3PLUS * don't set Register.NO_INPUTS per MODBUS * fix unit tests * register OUTPUT_COEFFICIENT at HA * update changelog * - Home Assistant: improve inverter status value texts * - GEN3: add inverter status * on closing send outstanding MQTT data to the broker * force MQTT publish on every conn open and close * reset inverter state on close - workaround which reset the inverter status to offline when the inverter has a very low output power on connection close * improve client modified - reduce the polling cadence to 30s - set controller statistics for HA * client mode set controller IP for HA * S allius/issue131 (#132) * Make __publish_outstanding_mqtt public * update proxy counter - on client mode connection establishment or disconnecting update tje counection counter * Update README.md (#133) * reset inverter state on close - workaround which reset the inverter status to offline when the inverter has a very low output power on connection close * S allius/issue134 (#135) * add polling invertval and method ha_remove() * add client_mode arg to constructors - add PollingInvervall * hide some topics in client mode - we hide topics in HA by sending an empty register MQTT topic during HA auto configuration * add client_mode value * update class diagram * fix modbus close handler - fix empty call and cleanup que - add unit test * don't sent an initial 1710 msg in client mode * change HA icon for inverter status * increase test coverage * accelerate timer tests * bump aiomqtt and schema to latest release (#137) * MQTT timestamps and protocol improvements (#140) * add TS_INPUT, TS_GRID and TS_TOTAL * prepare MQTT timestamps - add _set_mqtt_timestamp method - fix hexdump printing * push dev and debug images to docker.io * add unix epoche timestamp for MQTT pakets * set timezone for unit tests * set name für setting timezone step * trigger new action * GEN3 and GEN3PLUS: handle multiple message - read: iterate over the receive buffer - forward: append messages to the forward buffer - _update_header: iterate over the forward buffer * GEN3: optimize timeout handling - longer timeout in state init and reveived - got to state pending only from state up * update changelog * cleanup * print coloured logs * Create sonarcloud.yml (#143) * Update sonarcloud.yml * Update sonarcloud.yml * Update sonarcloud.yml * Update sonarcloud.yml * Update sonarcloud.yml * build multi arch images with sboms (#146) * don't send MODBUS request when state is not up (#147) * adapt timings * don't send MODBUS request when state is note up * adapt unit test * make test code more clean (#148) * Make test code more clean (#149) * cleanup * Code coverage for SonarCloud (#150) * cleanup code and unit tests * add test coverage for SonarCloud * configure SonarCloud * update changelog * Do no build on *.yml changes * prepare release 0.10.0 * disable MODBUS_POLLING for GEN§PLUS in example config * bump aiohttp to version 3.10.2 * code cleanup * Fetch all history for all tags and branches
259 lines
16 KiB
Python
259 lines
16 KiB
Python
|
|
# test_with_pytest.py
|
|
import pytest, json, math
|
|
from app.src.infos import Register
|
|
from app.src.gen3plus.infos_g3p import InfosG3P
|
|
from app.src.gen3plus.infos_g3p import RegisterMap
|
|
|
|
@pytest.fixture
|
|
def device_data(): # 0x4110 ftype: 0x02
|
|
msg = b'\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\xba\xd2\x00\x00'
|
|
msg += b'\x19\x00\x00\x00\x00\x00\x00\x00\x05\x3c\x78\x01\x64\x01\x4c\x53'
|
|
msg += b'\x57\x35\x42\x4c\x45\x5f\x31\x37\x5f\x30\x32\x42\x30\x5f\x31\x2e'
|
|
msg += b'\x30\x35\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00'
|
|
msg += b'\x00\x00\x00\x00\x00\x00\x40\x2a\x8f\x4f\x51\x54\x31\x39\x32\x2e'
|
|
msg += b'\x31\x36\x38\x2e\x38\x30\x2e\x34\x39\x00\x00\x00\x0f\x00\x01\xb0'
|
|
msg += b'\x02\x0f\x00\xff\x56\x31\x2e\x31\x2e\x30\x30\x2e\x30\x42\x00\x00'
|
|
msg += b'\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00'
|
|
msg += b'\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\xfe\xfe\x00\x00'
|
|
msg += b'\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00'
|
|
msg += b'\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00'
|
|
msg += b'\x00\x00\x00\x00\x00\x00\x00\x41\x6c\x6c\x69\x75\x73\x2d\x48\x6f'
|
|
msg += b'\x6d\x65\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00'
|
|
msg += b'\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00'
|
|
return msg
|
|
|
|
@pytest.fixture
|
|
def inverter_data(): # 0x4210 ftype: 0x01
|
|
msg = b'\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x01\xb0\x02\xbc\xc8'
|
|
msg += b'\x24\x32\x6c\x1f\x00\x00\xa0\x47\xe4\x33\x01\x00\x03\x08\x00\x00'
|
|
msg += b'\x59\x31\x37\x45\x30\x30\x30\x30\x30\x30\x30\x30\x30\x30\x30\x45'
|
|
msg += b'\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00'
|
|
msg += b'\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00'
|
|
msg += b'\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00'
|
|
msg += b'\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00'
|
|
msg += b'\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00'
|
|
msg += b'\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00'
|
|
msg += b'\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00'
|
|
msg += b'\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00'
|
|
msg += b'\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00'
|
|
msg += b'\x00\x01\x00\x02\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00'
|
|
msg += b'\x40\x10\x08\xc8\x00\x49\x13\x8d\x00\x36\x00\x00\x02\x58\x06\x7a'
|
|
msg += b'\x01\x61\x00\xa8\x02\x54\x01\x5a\x00\x8a\x01\xe4\x01\x5a\x00\xbd'
|
|
msg += b'\x02\x8f\x00\x11\x00\x01\x00\x00\x00\x0b\x00\x00\x27\x98\x00\x04'
|
|
msg += b'\x00\x00\x0c\x04\x00\x03\x00\x00\x0a\xe7\x00\x05\x00\x00\x0c\x75'
|
|
msg += b'\x00\x00\x00\x00\x06\x16\x02\x00\x00\x00\x55\xaa\x00\x01\x00\x00'
|
|
msg += b'\x00\x00\x00\x00\xff\xff\x07\xd0\x00\x03\x04\x00\x04\x00\x04\x00'
|
|
msg += b'\x04\x00\x00\x01\xff\xff\x00\x01\x00\x06\x00\x68\x00\x68\x05\x00'
|
|
msg += b'\x09\xcd\x07\xb6\x13\x9c\x13\x24\x00\x01\x07\xae\x04\x0f\x00\x41'
|
|
msg += b'\x00\x0f\x0a\x64\x0a\x64\x00\x06\x00\x06\x09\xf6\x12\x8c\x12\x8c'
|
|
msg += b'\x00\x10\x00\x10\x14\x52\x14\x52\x00\x10\x00\x10\x01\x51\x00\x05'
|
|
msg += b'\x04\x00\x00\x01\x13\x9c\x0f\xa0\x00\x4e\x00\x66\x03\xe8\x04\x00'
|
|
msg += b'\x09\xce\x07\xa8\x13\x9c\x13\x26\x00\x00\x00\x00\x00\x00\x00\x00'
|
|
msg += b'\x00\x00\x00\x00\x04\x00\x04\x00\x00\x00\x00\x00\xff\xff\x00\x00'
|
|
msg += b'\x00\x00\x00\x00'
|
|
return msg
|
|
|
|
|
|
def test_default_db():
|
|
i = InfosG3P(client_mode=False)
|
|
|
|
assert json.dumps(i.db) == json.dumps({
|
|
"inverter": {"Manufacturer": "TSUN", "Equipment_Model": "TSOL-MSxx00", "No_Inputs": 4},
|
|
"collector": {"Chip_Type": "IGEN TECH"},
|
|
})
|
|
|
|
def test_parse_4110(device_data: bytes):
|
|
i = InfosG3P(client_mode=False)
|
|
i.db.clear()
|
|
for key, update in i.parse (device_data, 0x41, 2):
|
|
pass # side effect is calling generator i.parse()
|
|
|
|
assert json.dumps(i.db) == json.dumps({
|
|
'controller': {"Data_Up_Interval": 300, "Collect_Interval": 1, "Heartbeat_Interval": 120, "Signal_Strength": 100, "IP_Address": "192.168.80.49"},
|
|
'collector': {"Chip_Model": "LSW5BLE_17_02B0_1.05", "Collector_Fw_Version": "V1.1.00.0B"},
|
|
})
|
|
|
|
def test_parse_4210(inverter_data: bytes):
|
|
i = InfosG3P(client_mode=False)
|
|
i.db.clear()
|
|
|
|
for key, update in i.parse (inverter_data, 0x42, 1):
|
|
pass # side effect is calling generator i.parse()
|
|
|
|
assert json.dumps(i.db) == json.dumps({
|
|
"controller": {"Power_On_Time": 2051},
|
|
"inverter": {"Serial_Number": "Y17E00000000000E", "Version": "V4.0.10", "Rated_Power": 600, "Max_Designed_Power": 2000},
|
|
"env": {"Inverter_Status": 1, "Inverter_Temp": 14},
|
|
"grid": {"Voltage": 224.8, "Current": 0.73, "Frequency": 50.05, "Output_Power": 165.8},
|
|
"input": {"pv1": {"Voltage": 35.3, "Current": 1.68, "Power": 59.6, "Daily_Generation": 0.04, "Total_Generation": 30.76},
|
|
"pv2": {"Voltage": 34.6, "Current": 1.38, "Power": 48.4, "Daily_Generation": 0.03, "Total_Generation": 27.91},
|
|
"pv3": {"Voltage": 34.6, "Current": 1.89, "Power": 65.5, "Daily_Generation": 0.05, "Total_Generation": 31.89},
|
|
"pv4": {"Voltage": 1.7, "Current": 0.01, "Power": 0.0, "Total_Generation": 15.58}},
|
|
"total": {"Daily_Generation": 0.11, "Total_Generation": 101.36}
|
|
})
|
|
|
|
def test_build_ha_conf1():
|
|
i = InfosG3P(client_mode=False)
|
|
i.static_init() # initialize counter
|
|
|
|
tests = 0
|
|
for d_json, comp, node_id, id in i.ha_confs(ha_prfx="tsun/", node_id="garagendach/", snr='123'):
|
|
|
|
if id == 'out_power_123':
|
|
assert comp == 'sensor'
|
|
assert d_json == json.dumps({"name": "Power", "stat_t": "tsun/garagendach/grid", "dev_cla": "power", "stat_cla": "measurement", "uniq_id": "out_power_123", "val_tpl": "{{value_json['Output_Power'] | float}}", "unit_of_meas": "W", "dev": {"name": "Micro Inverter", "sa": "Micro Inverter", "via_device": "controller_123", "mdl": "TSOL-MSxx00", "mf": "TSUN", "ids": ["inverter_123"]}, "o": {"name": "proxy", "sw": "unknown"}})
|
|
tests +=1
|
|
|
|
elif id == 'daily_gen_123':
|
|
assert comp == 'sensor'
|
|
assert d_json == json.dumps({"name": "Daily Generation", "stat_t": "tsun/garagendach/total", "dev_cla": "energy", "stat_cla": "total_increasing", "uniq_id": "daily_gen_123", "val_tpl": "{{value_json['Daily_Generation'] | float}}", "unit_of_meas": "kWh", "ic": "mdi:solar-power-variant", "dev": {"name": "Micro Inverter", "sa": "Micro Inverter", "via_device": "controller_123", "mdl": "TSOL-MSxx00", "mf": "TSUN", "ids": ["inverter_123"]}, "o": {"name": "proxy", "sw": "unknown"}})
|
|
tests +=1
|
|
|
|
elif id == 'power_pv1_123':
|
|
assert comp == 'sensor'
|
|
assert d_json == json.dumps({"name": "Power", "stat_t": "tsun/garagendach/input", "dev_cla": "power", "stat_cla": "measurement", "uniq_id": "power_pv1_123", "val_tpl": "{{ (value_json['pv1']['Power'] | float)}}", "unit_of_meas": "W", "dev": {"name": "Module PV1", "sa": "Module PV1", "via_device": "inverter_123", "ids": ["input_pv1_123"]}, "o": {"name": "proxy", "sw": "unknown"}})
|
|
tests +=1
|
|
|
|
elif id == 'power_pv2_123':
|
|
assert comp == 'sensor'
|
|
assert d_json == json.dumps({"name": "Power", "stat_t": "tsun/garagendach/input", "dev_cla": "power", "stat_cla": "measurement", "uniq_id": "power_pv2_123", "val_tpl": "{{ (value_json['pv2']['Power'] | float)}}", "unit_of_meas": "W", "dev": {"name": "Module PV2", "sa": "Module PV2", "via_device": "inverter_123", "ids": ["input_pv2_123"]}, "o": {"name": "proxy", "sw": "unknown"}})
|
|
tests +=1
|
|
|
|
elif id == 'power_pv3_123':
|
|
assert comp == 'sensor'
|
|
assert d_json == json.dumps({"name": "Power", "stat_t": "tsun/garagendach/input", "dev_cla": "power", "stat_cla": "measurement", "uniq_id": "power_pv3_123", "val_tpl": "{{ (value_json['pv3']['Power'] | float)}}", "unit_of_meas": "W", "dev": {"name": "Module PV3", "sa": "Module PV3", "via_device": "inverter_123", "ids": ["input_pv3_123"]}, "o": {"name": "proxy", "sw": "unknown"}})
|
|
tests +=1
|
|
|
|
elif id == 'power_pv4_123':
|
|
assert comp == 'sensor'
|
|
assert d_json == json.dumps({"name": "Power", "stat_t": "tsun/garagendach/input", "dev_cla": "power", "stat_cla": "measurement", "uniq_id": "power_pv4_123", "val_tpl": "{{ (value_json['pv4']['Power'] | float)}}", "unit_of_meas": "W", "dev": {"name": "Module PV4", "sa": "Module PV4", "via_device": "inverter_123", "ids": ["input_pv4_123"]}, "o": {"name": "proxy", "sw": "unknown"}})
|
|
tests +=1
|
|
|
|
elif id == 'signal_123':
|
|
assert comp == 'sensor'
|
|
assert d_json == json.dumps({"name": "Signal Strength", "stat_t": "tsun/garagendach/controller", "dev_cla": None, "stat_cla": "measurement", "uniq_id": "signal_123", "val_tpl": "{{value_json[\'Signal_Strength\'] | int}}", "unit_of_meas": "%", "ic": "mdi:wifi", "dev": {"name": "Controller", "sa": "Controller", "via_device": "proxy", "mf": "IGEN TECH", "ids": ["controller_123"]}, "o": {"name": "proxy", "sw": "unknown"}})
|
|
tests +=1
|
|
elif id == 'inv_count_456':
|
|
assert False
|
|
|
|
assert tests==7
|
|
|
|
|
|
for d_json, comp, node_id, id in i.ha_proxy_confs(ha_prfx="tsun/", node_id = 'proxy/', snr = '456'):
|
|
|
|
if id == 'out_power_123':
|
|
assert False
|
|
elif id == 'daily_gen_123':
|
|
assert False
|
|
elif id == 'power_pv1_123':
|
|
assert False
|
|
elif id == 'power_pv2_123':
|
|
assert False
|
|
elif id == 'power_pv3_123':
|
|
assert False
|
|
elif id == 'power_pv4_123':
|
|
assert False
|
|
elif id == 'signal_123':
|
|
assert False
|
|
elif id == 'inv_count_456':
|
|
assert comp == 'sensor'
|
|
assert d_json == json.dumps({"name": "Active Inverter Connections", "stat_t": "tsun/proxy/proxy", "dev_cla": None, "stat_cla": None, "uniq_id": "inv_count_456", "val_tpl": "{{value_json['Inverter_Cnt'] | int}}", "ic": "mdi:counter", "dev": {"name": "Proxy", "sa": "Proxy", "mdl": "proxy", "mf": "Stefan Allius", "sw": "unknown", "ids": ["proxy"]}, "o": {"name": "proxy", "sw": "unknown"}})
|
|
tests +=1
|
|
|
|
assert tests==8
|
|
|
|
def test_build_ha_conf2():
|
|
i = InfosG3P(client_mode=True)
|
|
i.static_init() # initialize counter
|
|
|
|
tests = 0
|
|
for d_json, comp, node_id, id in i.ha_confs(ha_prfx="tsun/", node_id="garagendach/", snr='123'):
|
|
|
|
if id == 'out_power_123':
|
|
assert comp == 'sensor'
|
|
assert d_json == json.dumps({"name": "Power", "stat_t": "tsun/garagendach/grid", "dev_cla": "power", "stat_cla": "measurement", "uniq_id": "out_power_123", "val_tpl": "{{value_json['Output_Power'] | float}}", "unit_of_meas": "W", "dev": {"name": "Micro Inverter", "sa": "Micro Inverter", "via_device": "controller_123", "mdl": "TSOL-MSxx00", "mf": "TSUN", "ids": ["inverter_123"]}, "o": {"name": "proxy", "sw": "unknown"}})
|
|
tests +=1
|
|
|
|
elif id == 'daily_gen_123':
|
|
assert comp == 'sensor'
|
|
assert d_json == json.dumps({"name": "Daily Generation", "stat_t": "tsun/garagendach/total", "dev_cla": "energy", "stat_cla": "total_increasing", "uniq_id": "daily_gen_123", "val_tpl": "{{value_json['Daily_Generation'] | float}}", "unit_of_meas": "kWh", "ic": "mdi:solar-power-variant", "dev": {"name": "Micro Inverter", "sa": "Micro Inverter", "via_device": "controller_123", "mdl": "TSOL-MSxx00", "mf": "TSUN", "ids": ["inverter_123"]}, "o": {"name": "proxy", "sw": "unknown"}})
|
|
tests +=1
|
|
|
|
elif id == 'power_pv1_123':
|
|
assert comp == 'sensor'
|
|
assert d_json == json.dumps({"name": "Power", "stat_t": "tsun/garagendach/input", "dev_cla": "power", "stat_cla": "measurement", "uniq_id": "power_pv1_123", "val_tpl": "{{ (value_json['pv1']['Power'] | float)}}", "unit_of_meas": "W", "dev": {"name": "Module PV1", "sa": "Module PV1", "via_device": "inverter_123", "ids": ["input_pv1_123"]}, "o": {"name": "proxy", "sw": "unknown"}})
|
|
tests +=1
|
|
|
|
elif id == 'power_pv2_123':
|
|
assert comp == 'sensor'
|
|
assert d_json == json.dumps({"name": "Power", "stat_t": "tsun/garagendach/input", "dev_cla": "power", "stat_cla": "measurement", "uniq_id": "power_pv2_123", "val_tpl": "{{ (value_json['pv2']['Power'] | float)}}", "unit_of_meas": "W", "dev": {"name": "Module PV2", "sa": "Module PV2", "via_device": "inverter_123", "ids": ["input_pv2_123"]}, "o": {"name": "proxy", "sw": "unknown"}})
|
|
tests +=1
|
|
|
|
elif id == 'power_pv3_123':
|
|
assert comp == 'sensor'
|
|
assert d_json == json.dumps({"name": "Power", "stat_t": "tsun/garagendach/input", "dev_cla": "power", "stat_cla": "measurement", "uniq_id": "power_pv3_123", "val_tpl": "{{ (value_json['pv3']['Power'] | float)}}", "unit_of_meas": "W", "dev": {"name": "Module PV3", "sa": "Module PV3", "via_device": "inverter_123", "ids": ["input_pv3_123"]}, "o": {"name": "proxy", "sw": "unknown"}})
|
|
tests +=1
|
|
|
|
elif id == 'power_pv4_123':
|
|
assert comp == 'sensor'
|
|
assert d_json == json.dumps({"name": "Power", "stat_t": "tsun/garagendach/input", "dev_cla": "power", "stat_cla": "measurement", "uniq_id": "power_pv4_123", "val_tpl": "{{ (value_json['pv4']['Power'] | float)}}", "unit_of_meas": "W", "dev": {"name": "Module PV4", "sa": "Module PV4", "via_device": "inverter_123", "ids": ["input_pv4_123"]}, "o": {"name": "proxy", "sw": "unknown"}})
|
|
tests +=1
|
|
|
|
elif id == 'signal_123':
|
|
assert comp == 'sensor'
|
|
assert d_json == json.dumps({})
|
|
tests +=1
|
|
elif id == 'inv_count_456':
|
|
assert False
|
|
|
|
assert tests==7
|
|
|
|
|
|
for d_json, comp, node_id, id in i.ha_proxy_confs(ha_prfx="tsun/", node_id = 'proxy/', snr = '456'):
|
|
|
|
if id == 'out_power_123':
|
|
assert False
|
|
elif id == 'daily_gen_123':
|
|
assert False
|
|
elif id == 'power_pv1_123':
|
|
assert False
|
|
elif id == 'power_pv2_123':
|
|
assert False
|
|
elif id == 'power_pv3_123':
|
|
assert False
|
|
elif id == 'power_pv4_123':
|
|
assert False
|
|
elif id == 'signal_123':
|
|
assert False
|
|
elif id == 'inv_count_456':
|
|
assert comp == 'sensor'
|
|
assert d_json == json.dumps({"name": "Active Inverter Connections", "stat_t": "tsun/proxy/proxy", "dev_cla": None, "stat_cla": None, "uniq_id": "inv_count_456", "val_tpl": "{{value_json['Inverter_Cnt'] | int}}", "ic": "mdi:counter", "dev": {"name": "Proxy", "sa": "Proxy", "mdl": "proxy", "mf": "Stefan Allius", "sw": "unknown", "ids": ["proxy"]}, "o": {"name": "proxy", "sw": "unknown"}})
|
|
tests +=1
|
|
|
|
assert tests==8
|
|
|
|
def test_exception_and_eval(inverter_data: bytes):
|
|
|
|
# add eval to convert temperature from °F to °C
|
|
RegisterMap.map[0x420100d8]['eval'] = '(result-32)/1.8'
|
|
# map PV1_VOLTAGE to invalid register
|
|
RegisterMap.map[0x420100e0]['reg'] = Register.TEST_REG2
|
|
# set invalid maping entry for OUTPUT_POWER (string instead of dict type)
|
|
backup = RegisterMap.map[0x420100de]
|
|
RegisterMap.map[0x420100de] = 'invalid_entry'
|
|
|
|
i = InfosG3P(client_mode=False)
|
|
# i.db.clear()
|
|
|
|
for key, update in i.parse (inverter_data, 0x42, 1):
|
|
pass # side effect is calling generator i.parse()
|
|
assert math.isclose(12.2222, round (i.get_db_value(Register.INVERTER_TEMP, 0),4), rel_tol=1e-09, abs_tol=1e-09)
|
|
del RegisterMap.map[0x420100d8]['eval'] # remove eval
|
|
RegisterMap.map[0x420100e0]['reg'] = Register.PV1_VOLTAGE # reset mapping
|
|
RegisterMap.map[0x420100de] = backup # reset mapping
|
|
|
|
for key, update in i.parse (inverter_data, 0x42, 1):
|
|
pass # side effect is calling generator i.parse()
|
|
assert 54 == i.get_db_value(Register.INVERTER_TEMP, 0)
|
|
|