b364fb3f8e
* S allius/issue117 (#118) * add shutdown flag * add more register definitions * add start commando for client side connections * add first support for port 8899 * fix shutdown * add client_mode configuration * read client_mode config to setup inverter connections * add client_mode connections over port 8899 * add preview build * Update README.md describe the new client-mode over port 8899 for GEN3PLUS * MODBUS: the last digit of the inverter version is a hexadecimal number (#121) * S allius/issue117 (#122) * add shutdown flag * add more register definitions * add start commando for client side connections * add first support for port 8899 * fix shutdown * add client_mode configuration * read client_mode config to setup inverter connections * add client_mode connections over port 8899 * add preview build * add documentation for client_mode * catch os error and log thme with DEBUG level * update changelog * make the maximum output coefficient configurable (#124) * S allius/issue120 (#126) * add config option to disable the modbus polling * read more modbus regs in polling mode * extend connection timeouts if polling mode is disabled * update changelog * S allius/issue125 (#127) * fix linter warning * move sequence diagramm to wiki * catch asyncio.CancelledError * S allius/issue128 (#130) * set Register.NO_INPUTS fix to 4 for GEN3PLUS * don't set Register.NO_INPUTS per MODBUS * fix unit tests * register OUTPUT_COEFFICIENT at HA * update changelog * - Home Assistant: improve inverter status value texts * - GEN3: add inverter status * on closing send outstanding MQTT data to the broker * force MQTT publish on every conn open and close * reset inverter state on close - workaround which reset the inverter status to offline when the inverter has a very low output power on connection close * improve client modified - reduce the polling cadence to 30s - set controller statistics for HA * client mode set controller IP for HA * S allius/issue131 (#132) * Make __publish_outstanding_mqtt public * update proxy counter - on client mode connection establishment or disconnecting update tje counection counter * Update README.md (#133) * reset inverter state on close - workaround which reset the inverter status to offline when the inverter has a very low output power on connection close * S allius/issue134 (#135) * add polling invertval and method ha_remove() * add client_mode arg to constructors - add PollingInvervall * hide some topics in client mode - we hide topics in HA by sending an empty register MQTT topic during HA auto configuration * add client_mode value * update class diagram * fix modbus close handler - fix empty call and cleanup que - add unit test * don't sent an initial 1710 msg in client mode * change HA icon for inverter status * increase test coverage * accelerate timer tests * bump aiomqtt and schema to latest release (#137) * MQTT timestamps and protocol improvements (#140) * add TS_INPUT, TS_GRID and TS_TOTAL * prepare MQTT timestamps - add _set_mqtt_timestamp method - fix hexdump printing * push dev and debug images to docker.io * add unix epoche timestamp for MQTT pakets * set timezone for unit tests * set name für setting timezone step * trigger new action * GEN3 and GEN3PLUS: handle multiple message - read: iterate over the receive buffer - forward: append messages to the forward buffer - _update_header: iterate over the forward buffer * GEN3: optimize timeout handling - longer timeout in state init and reveived - got to state pending only from state up * update changelog * cleanup * print coloured logs * Create sonarcloud.yml (#143) * Update sonarcloud.yml * Update sonarcloud.yml * Update sonarcloud.yml * Update sonarcloud.yml * Update sonarcloud.yml * build multi arch images with sboms (#146) * don't send MODBUS request when state is not up (#147) * adapt timings * don't send MODBUS request when state is note up * adapt unit test * make test code more clean (#148) * Make test code more clean (#149) * cleanup * Code coverage for SonarCloud (#150) * cleanup code and unit tests * add test coverage for SonarCloud * configure SonarCloud * update changelog * Do no build on *.yml changes * prepare release 0.10.0 * disable MODBUS_POLLING for GEN§PLUS in example config * bump aiohttp to version 3.10.2 * code cleanup * Fetch all history for all tags and branches
184 lines
7.3 KiB
Python
184 lines
7.3 KiB
Python
# test_with_pytest.py and scapy
|
|
#
|
|
import pytest, socket, time, os
|
|
from dotenv import load_dotenv
|
|
|
|
load_dotenv()
|
|
|
|
SOLARMAN_SNR = os.getenv('SOLARMAN_SNR', '00000080')
|
|
|
|
def get_sn() -> bytes:
|
|
return bytes.fromhex(SOLARMAN_SNR)
|
|
|
|
def get_inv_no() -> bytes:
|
|
return b'T170000000000001'
|
|
|
|
def get_invalid_sn():
|
|
return b'R170000000000002'
|
|
|
|
def correct_checksum(buf):
|
|
checksum = sum(buf[1:]) & 0xff
|
|
return checksum.to_bytes(length=1)
|
|
|
|
@pytest.fixture
|
|
def MsgContactInfo(): # Contact Info message
|
|
msg = b'\xa5\xd4\x00\x10\x41\x00\x01' +get_sn() +b'\x02\xba\xd2\x00\x00'
|
|
msg += b'\x19\x00\x00\x00\x00\x00\x00\x00\x05\x3c\x78\x01\x64\x01\x4c\x53'
|
|
msg += b'\x57\x35\x42\x4c\x45\x5f\x31\x37\x5f\x30\x32\x42\x30\x5f\x31\x2e'
|
|
msg += b'\x30\x35\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00'
|
|
msg += b'\x00\x00\x00\x00\x00\x00\x40\x2a\x8f\x4f\x51\x54\x31\x39\x32\x2e'
|
|
msg += b'\x31\x36\x38\x2e\x38\x30\x2e\x34\x39\x00\x00\x00\x0f\x00\x01\xb0'
|
|
msg += b'\x02\x0f\x00\xff\x56\x31\x2e\x31\x2e\x30\x30\x2e\x30\x42\x00\x00'
|
|
msg += b'\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00'
|
|
msg += b'\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\xfe\xfe\x00\x00'
|
|
msg += b'\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00'
|
|
msg += b'\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00'
|
|
msg += b'\x00\x00\x00\x00\x00\x00\x00\x41\x6c\x6c\x69\x75\x73\x2d\x48\x6f'
|
|
msg += b'\x6d\x65\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00'
|
|
msg += b'\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x3c'
|
|
msg += b'\x15'
|
|
return msg
|
|
|
|
@pytest.fixture
|
|
def MsgContactResp(): # Contact Response message
|
|
msg = b'\xa5\x0a\x00\x10\x11\x01\x01' +get_sn() +b'\x02\x01\x6a\xfd\x8f'
|
|
msg += b'\x65\x3c\x00\x00\x00\x75\x15'
|
|
return msg
|
|
|
|
@pytest.fixture
|
|
def MsgDataInd():
|
|
msg = b'\xa5\x99\x01\x10\x42\x59\x84' +get_sn() +b'\x01\xb0\x02\x2c\x87'
|
|
msg += b'\x22\x32\xb7\x29\x00\x00\xd6\xcf\xe1\x33\x01\x00\x0c\x05\x00\x00'
|
|
msg += b'\x59\x31\x37\x45\x37\x41\x30\x46\x30\x31\x30\x42\x30\x31\x33\x45'
|
|
msg += b'\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00'
|
|
msg += b'\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00'
|
|
msg += b'\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00'
|
|
msg += b'\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00'
|
|
msg += b'\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00'
|
|
msg += b'\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00'
|
|
msg += b'\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00'
|
|
msg += b'\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00'
|
|
msg += b'\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00'
|
|
msg += b'\x00\x01\x12\x02\x12\x12\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00'
|
|
msg += b'\x40\x10\x08\xd8\x00\x09\x13\x84\x00\x35\x00\x00\x02\x58\x00\xd8'
|
|
msg += b'\x01\x3f\x00\x17\x00\x4d\x01\x44\x00\x14\x00\x43\x01\x45\x00\x18'
|
|
msg += b'\x00\x52\x00\x12\x00\x01\x00\x00\x00\x7c\x00\x00\x24\xed\x00\x2c'
|
|
msg += b'\x00\x00\x0b\x10\x00\x26\x00\x00\x0a\x0f\x00\x30\x00\x00\x0b\x76'
|
|
|
|
msg += b'\x00\x00\x00\x00\x06\x16\x00\x00\x00\x01\x55\xaa\x00\x01\x00\x00'
|
|
msg += b'\x00\x00\x00\x00\xff\xff\x07\xd0\x00\x03\x04\x00\x04\x00\x04\x00'
|
|
msg += b'\x04\x00\x00\x01\xff\xff\x00\x01\x00\x06\x00\x68\x00\x68\x05\x00'
|
|
msg += b'\x09\xcd\x07\xb6\x13\x9c\x13\x24\x00\x01\x07\xae\x04\x0f\x00\x41'
|
|
msg += b'\x00\x0f\x0a\x64\x0a\x64\x00\x06\x00\x06\x09\xf6\x12\x8c\x12\x8c'
|
|
msg += b'\x00\x10\x00\x10\x14\x52\x14\x52\x00\x10\x00\x10\x01\x51\x00\x05'
|
|
msg += b'\x04\x00\x00\x01\x13\x9c\x0f\xa0\x00\x4e\x00\x66\x03\xe8\x04\x00'
|
|
msg += b'\x09\xce\x07\xa8\x13\x9c\x13\x26\x00\x00\x00\x00\x00\x00\x00\x00'
|
|
msg += b'\x00\x00\x00\x00\x04\x00\x04\x00\x00\x00\x00\x00\xff\xff\x00\x00'
|
|
msg += b'\x00\x00\x00\x00'
|
|
msg += correct_checksum(msg)
|
|
msg += b'\x15'
|
|
return msg
|
|
|
|
@pytest.fixture
|
|
def MsgDataResp(): # Contact Response message
|
|
msg = b'\xa5\x0a\x00\x10\x12\x80\x84' +get_sn() +b'\x01\x01\xd1\x96\x04'
|
|
msg += b'\x66\x3c\x00\x00\x00\xed\x15'
|
|
return msg
|
|
|
|
|
|
@pytest.fixture
|
|
def MsgInvalidInfo(): # Contact Info message wrong start byte
|
|
msg = b'\x47\xd4\x00\x10\x41\x00\x01' +get_sn() +b'\x02\xba\xd2\x00\x00'
|
|
msg += b'\x19\x00\x00\x00\x00\x00\x00\x00\x05\x3c\x78\x01\x64\x01\x4c\x53'
|
|
msg += b'\x57\x35\x42\x4c\x45\x5f\x31\x37\x5f\x30\x32\x42\x30\x5f\x31\x2e'
|
|
msg += b'\x30\x35\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00'
|
|
msg += b'\x00\x00\x00\x00\x00\x00\x40\x2a\x8f\x4f\x51\x54\x31\x39\x32\x2e'
|
|
msg += b'\x31\x36\x38\x2e\x38\x30\x2e\x34\x39\x00\x00\x00\x0f\x00\x01\xb0'
|
|
msg += b'\x02\x0f\x00\xff\x56\x31\x2e\x31\x2e\x30\x30\x2e\x30\x42\x00\x00'
|
|
msg += b'\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00'
|
|
msg += b'\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\xfe\xfe\x00\x00'
|
|
msg += b'\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00'
|
|
msg += b'\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00'
|
|
msg += b'\x00\x00\x00\x00\x00\x00\x00\x41\x6c\x6c\x69\x75\x73\x2d\x48\x6f'
|
|
msg += b'\x6d\x65\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00'
|
|
msg += b'\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x3c'
|
|
msg += b'\x15'
|
|
return msg
|
|
|
|
|
|
@pytest.fixture(scope="session")
|
|
def ClientConnection():
|
|
host = 'logger.talent-monitoring.com'
|
|
port = 10000
|
|
with socket.socket(socket.AF_INET, socket.SOCK_STREAM) as s:
|
|
s.connect((host, port))
|
|
s.settimeout(1)
|
|
yield s
|
|
s.close()
|
|
|
|
def checkResponse(data, Msg):
|
|
check = bytearray(data)
|
|
check[5]= Msg[5] # ignore seq
|
|
check[13:18]= Msg[13:18] # ignore timestamp + first byte of repeat time
|
|
check[21]= Msg[21] # ignore crc
|
|
assert check == Msg
|
|
|
|
|
|
def tempClientConnection():
|
|
host = 'logger.talent-monitoring.com'
|
|
port = 10000
|
|
with socket.socket(socket.AF_INET, socket.SOCK_STREAM) as s:
|
|
s.connect((host, port))
|
|
s.settimeout(1)
|
|
yield s
|
|
time.sleep(2.5)
|
|
s.close()
|
|
|
|
def test_open_close():
|
|
try:
|
|
for _ in tempClientConnection():
|
|
pass # test generator tempClientConnection()
|
|
except:
|
|
assert False
|
|
|
|
def test_conn_msg(ClientConnection,MsgContactInfo, MsgContactResp):
|
|
s = ClientConnection
|
|
try:
|
|
s.sendall(MsgContactInfo)
|
|
# time.sleep(2.5)
|
|
data = s.recv(1024)
|
|
except TimeoutError:
|
|
pass
|
|
# time.sleep(2.5)
|
|
checkResponse(data, MsgContactResp)
|
|
|
|
def test_data_ind(ClientConnection,MsgDataInd, MsgDataResp):
|
|
s = ClientConnection
|
|
try:
|
|
s.sendall(MsgDataInd)
|
|
# time.sleep(2.5)
|
|
data = s.recv(1024)
|
|
except TimeoutError:
|
|
pass
|
|
# time.sleep(2.5)
|
|
checkResponse(data, MsgDataResp)
|
|
|
|
def test_inavlid_msg(ClientConnection,MsgInvalidInfo,MsgContactInfo, MsgContactResp):
|
|
s = ClientConnection
|
|
try:
|
|
s.sendall(MsgInvalidInfo)
|
|
# time.sleep(2.5)
|
|
data = s.recv(1024)
|
|
except TimeoutError:
|
|
pass
|
|
# time.sleep(2.5)
|
|
try:
|
|
s.sendall(MsgContactInfo)
|
|
# time.sleep(2.5)
|
|
data = s.recv(1024)
|
|
except TimeoutError:
|
|
pass
|
|
# time.sleep(2.5)
|
|
checkResponse(data, MsgContactResp)
|
|
|
|
|