---
configuration:
  inverters:
    name: Inverters
    description: >-
      For each GEN3 inverter, the serial number of the inverter must be mapped to an MQTT
      definition. To do this, the corresponding configuration block is started with
      <16-digit serial number> so that all subsequent parameters are assigned
      to this inverter. Further inverter-specific parameters (e.g. polling mode) can be set
      in the configuration block

      The serial numbers of all GEN3 inverters start with `R17`!

      node_id            # MQTT replacement for inverters serial number
      suggested_area     # suggested installation area for home-assistant
      modbus_polling     # Disable optional MODBUS polling
      pv1                # Optional, PV module descr
      pv2                # Optional, PV module descr

  tsun.enabled:
    name: Connection to TSUN Cloud
    description: >-
      disable connecting to the tsun cloud avoids updates.
      The Inverter become isolated from Internet if switched on.
  solarman.enabled:
    name: Connection to Solarman Cloud
    description: >-
      disables connecting to the Solarman cloud avoids updates.
      The Inverter become isolated from Internet if switched on.
  inverters.allow_all:
    name: Allow all connections from all inverters
    description: >-
      The proxy only usually accepts connections from known inverters.
      This can be switched off for test purposes and unknown serial
      numbers are also accepted.
  mqtt.host:
    name: MQTT Broker Host
    description: >-
      Hostname or IP address of the MQTT broker. if not set, the addon will try to connect to the Home Assistant MQTT broker
  mqtt.port:
    name: MQTT Broker Port
    description: >-
      Port of the MQTT broker. if not set, the addon will try to connect to the Home Assistant MQTT broker
  mqtt.user:
    name: MQTT Broker User
    description: >-
      User for the MQTT broker. if not set, the addon will try to connect to the Home Assistant MQTT broker
  mqtt.passwd:
    name: MQTT Broker Password
    description: >-
      Password for the MQTT broker. if not set, the addon will try to connect to the Home Assistant MQTT broker
  ha.auto_conf_prefix:
    name: MQTT prefix for subscribing for homeassistant status updates
  ha.discovery_prefix:
    name: MQTT prefix for discovery topic
  ha.entity_prefix:
    name: MQTT topic prefix for publishing inverter values
  ha.proxy_node_id:
    name: MQTT node id, for the proxy_node_id
  ha.proxy_unique_id:
    name: MQTT unique id, to identify a proxy instance

network:
  8127/tcp: x...
  5005/tcp: listening Port for TSUN GEN3 Devices
  10000/tcp: listening Port for TSUN GEN3PLUS Devices