* add dcu_power MQTT topic
* add DCU_COMMAND counter
* test invalid dcu_power values
* handle and test DCU Command responses
* test dcu commands from the TSUN cloud
* cleanup MQTT topic handling
* update changelog
* test MQTT error and exception handling
* increase test coverage
* test dispatcher exceptions
* fix full_topic definition in dispatch test
* scan log files for timestamp as creating timestamp
* increase test coverage
* add an empty file for unit tests
- the empty file is needed for unit tests to force
an exception on the try to scan the first line
for an timestamp
* set timezone of scanned creation time
* setup logger for hypercorn and dashboard
* use logger.ini to setup dashboard logger
* workaround: restore the hypercorn logger config
- quart/hyercorn overwrites the logger config.
as a workaround we restore the config at the
beginning of a request
* fix the hypercorn log handler only once
* change proxy into a ASGI application
- move Quart init from server.py into app.py
- create Server class for config and loggin setup
- restore hypercorn logging configuration after
start of Quart/Hypercorn
* move get_log_level into Server class
* define config in test_emu_init_close
* remove Web() instance from the testcase
- with importing app.py The blueprint Web() will
automatically created and a second call in test-
cases must avoided
* add unit tests
* move code from app.py into server.py
* test the init_logging_system() method
* add HypercornLogHndl tests
* fix deprecated pytest async warning
- Cleanup pending async tasks
- fix deprecated warning about event_loop
* add unit test for error handling in build_config()
* coverage: ignore quart template files
* check print output in test_save_and_restore
* update changelog
* add Dashboards log handler to all known loggers
* add list of last 3 warnings/errors to page
* add note list to page
* create LogHandler for the dashboard
- simple memory log handler which stores the last
64 warnings/errors for the dashboard
* render warnings/errors as note list
* add page for warnings and errors
* fix double defined build target
* add well done message if no errors in the logs
* translate page titles
* more translations
* add Notes page and table for important messages
* add unit tests
* display proxy version on dashboard
* add MQTT page
* styles adjusted on the different pages
- use same colors
- add bordered shadow to all cards and tables
* fix unit tests
* migrate the conn table to a general table
- rename the template file
- get headline from table description
* remove footer from index page
* make version string translateable
* cleanup
* remove stripped table rows
* add mqtt info table
* translate mqtt page
* don't fetch notes list for the log-page
* fix Mqtt init call for unit tests
* add mqtt-fetch test
* check received counter in unit test
* add route for log file deletion
* add modal for senity check before file deletion
* add trash icon which unhide the modal
* add more translations
* increase test coverage
* cleanup
* store logging path in Config class
* rename template files and page files
* jump to referer page
- after changing the language, we jump to
the referer page, if the attribute exists
* build and send list of log-files
* rename Download page into Log files
* initialize log-path in test config
* improve dashboard unit tests
- add log file tests
- check content-languages after language switch
* initialize config structure for log-file tests
* add test log file to project
* add sub_dir to test log path
- non files must be skipped. To test this we add
a sub directory to the test log directory
* add german translations
* set quart debug flag for debug versions
* update changelog
* add button for languages setting
* build a web module for the dashboard
- load all python module from local dir
- initialize Blueprint and Babel
* set a default key for secure cookies
* add translations to docker container
* improve translation build
- clean target erases the *.pot
- don't modify the resurt of url_for() calls
- don't translate the language description
* translate connection table, fix icon
* build relative urls for HA ingress
* fix unit test, increase coverage
* design counter on connection board
* display time of last update and add reload button
* chance `Updated` field to a real button
* Provide counter values for the dashboard
* change background color ot the top branch
- use dark-grey instead of black to reduce the contrast
* change color of counter tiles
* test proxy connection counter handling
* prepare conn-table and notes list building
* remove obsolete menue points
* store client mode for dashboard
* store inverters serial number for the dashboard
* store inverters serial number
* build connection table for dashboard
* add connection table to dashboard
* fix responsiveness of the tiles
* adapt unit tests
* remove test fake code
* increase test coverage, remove obsolete if statement
* add optional java script to fetch data regulary
* change file extension to `html.j2` for templates
* fix route for fetch data
- for running in iframes (e.g. HA ingress) we must
use relative path in the URLs
* increase test coverage
* remove unused statements
* update favicon.svg
* add optional java script to fetch data regullary
* change file extension to `html.j2` for templates
* fix route for fetch data
- for running in iframes (e.g. HA ingress) we must
use relative path in the URLs
* increase test coverage
* remove unused statements
* ignore translation and log files
* add quart-babel
* build and install translation files
* don't export the web-ui port 8127
- for security reason the user should use the
HA ingress and not the direkt access to the web
dashboard
* set 'lang' in html tag
* configure path to web files for Quart
* copy web-file into the add-on container
* add test template and stylesheet
* add w3.css dashboard
* fix unit test for test dashboard
* add Roboto font
* add awesome web font
* add all favicon formats
* load fonts locally
* adapt unit tests
* add all font and favicons to add-on
* fix sonarqube warnings
* add unit tests for all favicons
* Add two states build from the measurements
- Batterie Status calculated from the batt current
- Power Supply State calc from the out Power
* improve test coverage
* Cleanup MQTT json format for DCU batterie
- add hw and sw version
- rename total generation into total charging energy
- rename cell temperature sensors
- restructure json format
- adapt unit tests
* revert changed test packages
* move forward_at_cmd_resp into InfosG3P class
- the variable is shared between the two connections
of an inverter. One is for the TSUN cloud and the
other for the device.
* use inverter class to share values between
the two protocol instances of a proxy
- move forward_at_cmd_resp into class InverterG3P
- store inverter ptr in Solarman_V5 instances
- add inverter ptr to all constructurs of protocols
- adapt doku and unit tests-
- add integration tests for AT+ commands which
check the forwarding from and to the TSUN cloud
* adapt and improve the unit tests
- fix node_id declaration, which always has a / at
the end. See config grammar for this rule
- set global var test to default after test run
* set equipment model dor DCU1000 devices
* DCU1000: add temp sensor and mppt states
* DCU1000: add total generation
* add more DCU1000 registers for MODBUS polling
* improve names of batterie measurements
* add more diagnostic registers
* adapt unit tests
* move uml files into subfolder
* add sensors for batterie cell voltages
* swap On and Off for MPPT status
* split register map into multiple maps
* add base support reg mapping 0x01900000
* fix shadowed builtin
* detect reg mapping for sensor automatically
* add device and test regs for MS-3000
* add more register mappings
* fix unit tests
* add more MS-3000 registers
* build modell string for TSUN MS-3000
* add MS3000 unit test
* remove obsolete method __set_config_parms
* fix start addr of modbus scans
- in server mode the start addr must be reduced
by mb_step
* add tests for sensor_list of ms-3000 inverters
* MS-3000: add integer test register
* DCU-1000: add Out Status register
* add integer test and batterie out register
* fix Sonar Qube finding
* DCU-1000: add temp sensors
* accept DCU serial number starting with '410'
* determine sensor-list by serial number
* adapt unit test for DCU support
* send first batterie measurements to home assistant
* add test case for sensor-list==3036
* add more registers for batteries
* improve error logging (Monitoring SN)
* update the add-on repro only for one stage
* add configuration for energie storages
* add License and Readme file to the add-on
* addon: add date and time to dev and debug docker container tag
* disable duplicate code check for config.py
* cleanup unit test, remove trailing whitespaces
* update changelog
* fix example config for batteries
* cleanup config.jinja template
* fix comments
* improve help texts
* remove apostrophes from fmt strings
- thanks to @onkelenno for the suggestion
* improve the logger initializing
- don't overwrite the logging.ini settings if the
env variable LOG_LVL isn't well defined
- Thanks to @onkelenno for the idea to improve
* set default argument for LOG_LVL to INFO in docker files
* adapt unit test
* add ha_addons repository to cscode workspace
* Issue220 ha addon dokumentation update (#232)
* initial DOCS.md for Addon
* links to Mosquitto and Adguard
* replaced _ by . for PV-Strings
* mentioned add-on installation method in README.md
* fix most of the markdown linter warnings
* add missing alt texts
* added nice add repository to my Home Assistant badges
---------
Co-authored-by: Michael Metz <michael.metz@siemens.com>
Co-authored-by: Stefan Allius <stefan.allius@t-online.de>
* S allius/issue216 (#235)
* improve docker run
- establish multistage Dockerfile
- build a python wheel for all needed packages
- remove unneeded tools like apk for runtime
* pin versions, fix hadolint warnings
* merge from dev-0.12
---------
Co-authored-by: Michael Metz <michael.metz@siemens.com>
* Issue220 ha addon dokumentation update (#245)
* revised config disclaimer
* add newline at end of file to fix linter warning
---------
Co-authored-by: Michael Metz <michael.metz@siemens.com>
* 238 ha addon repository check (#244)
* move Makefile and bake file into parent folder
* build config.yaml from template
* use Makefile instead of build shell script
* ignore temporary or created files
* add rules for building the add-on repository
* add rel version of add-on
* add jinja2-cli
* ignore inverter replays which a older than 1 day (#246)
* S allius/issue7 (#248)
* report alarm and fault bitfield to ha
* define the alarm and fault names
* configure log path and max number of daily log files (#243)
* configure log path and max number of daily log files
* don't use a subfolder for configs
* use make instead of a build script
* mount /homeassistant/tsun-proxy
* Add venv to base image
* give write access to mounted folder
* intial checkin, ignore SC1091
* set advanced and stage value in config.yaml
* fix typo
* added watchdog and removed Port 8127 from mapping
* fixed typo and use new add-on repro
- change the install button to install from
https://github.com/s-allius/ha-addons
* add addon-rel target
* disable watchdog due to exceptions in the ha supervisor
* update changelog
---------
Co-authored-by: Michael Metz <michael.metz@siemens.com>
* Update README.md (#251)
install `https://github.com/s-allius/ha-addons` as repro for our add-on
* add german language file (#253)
* fix return type get_extra_info in FakeWriter
* move global startup code into main methdod
* pin version of base image
* avoid forwarding to a private (lokal) IP addr (#256)
* avoid forwarding to a private (lokal) IP addr
* test DNS resolver issues
* increase test coverage
* update changelog
* fix client_mode configuration block (#252)
* fix client_mode block
* add client mode
* fix tests with client_mode values
* log client_mode configuration
* add forward flag for client_mode
* improve startup logging
* added client_mode example
* adjusted translation files
* AT commands added
* typo
* missing "PLUS"
* link to config details
* improve log msg for config problems
* improve log msg on config errors
* improve log msg for config problems
* copy CHANGELOG.md into add-on repro
---------
Co-authored-by: Michael Metz <michael.metz@siemens.com>
* rename "ConfigErr" to match naming convention
* disable test coverage for __main__
* update changelog version 0.12
---------
Co-authored-by: metzi <147942647+mime24@users.noreply.github.com>
Co-authored-by: Michael Metz <michael.metz@siemens.com>
* add some reader classes to get the configuration
* adapt unittests
* get config from json or toml file
* loop over all config readers to get the configuration
* rename config test files
* use relative paths for coverage test in vscode
* do not throw an error for missing config files
* remove obsolete tests
* use dotted key notation for pv sub dictonary
* log config reading progress
* remove create_config_toml.py
* remove obsolete tests for the ha_addon
* disable mosquitto tests if the server is down
* ignore main method for test coverage
* increase test coverage
* pytest-cov: use relative_files only on github, so coverage will work with vscode locally
* remove unneeded imports
* add missing test cases
* disable branch coverage, cause its not reachable
