Dev 0.10 (#151)

* S allius/issue117 (#118)

* add shutdown flag

* add more register definitions

* add start commando for client side connections

* add first support for port 8899

* fix shutdown

* add client_mode configuration

* read client_mode config to setup inverter connections

* add client_mode connections over port 8899

* add preview build

* Update README.md

describe the new client-mode over port 8899 for GEN3PLUS

* MODBUS: the last digit of the inverter version is a hexadecimal number (#121)

* S allius/issue117 (#122)

* add shutdown flag

* add more register definitions

* add start commando for client side connections

* add first support for port 8899

* fix shutdown

* add client_mode configuration

* read client_mode config to setup inverter connections

* add client_mode connections over port 8899

* add preview build

* add documentation for client_mode

* catch os error and log thme with DEBUG level

* update changelog

* make the maximum output coefficient configurable (#124)

* S allius/issue120 (#126)

* add config option to disable the modbus polling

* read more modbus regs in polling mode

* extend connection timeouts if polling mode is disabled

* update changelog

* S allius/issue125 (#127)

* fix linter warning

* move sequence diagramm to wiki

* catch asyncio.CancelledError

* S allius/issue128 (#130)

* set Register.NO_INPUTS fix to 4 for GEN3PLUS

* don't set Register.NO_INPUTS per MODBUS

* fix unit tests

* register OUTPUT_COEFFICIENT at HA

* update changelog

* - Home Assistant: improve inverter status value texts

* - GEN3: add inverter status

* on closing send outstanding MQTT data to the broker

* force MQTT publish on every conn open and close

* reset inverter state on close

- workaround which reset the inverter status to
  offline when the inverter has a very low
  output power on connection close

* improve client modified
- reduce the polling cadence to 30s
- set controller statistics for HA

* client mode set controller IP for HA

* S allius/issue131 (#132)

* Make __publish_outstanding_mqtt public

* update proxy counter

- on client mode connection establishment or
  disconnecting update tje counection counter

* Update README.md (#133)

* reset inverter state on close

- workaround which reset the inverter status to
  offline when the inverter has a very low
  output power on connection close

* S allius/issue134 (#135)

* add polling invertval and method ha_remove()

* add client_mode arg to constructors

- add PollingInvervall

* hide some topics in client mode

- we hide topics in HA by sending an empty register
  MQTT topic during HA auto configuration

* add client_mode value

* update class diagram

* fix modbus close handler

- fix empty call and cleanup que
- add unit test

* don't sent an initial 1710 msg in client mode

* change HA icon for inverter status

* increase test coverage

* accelerate timer tests

* bump aiomqtt and schema to latest release (#137)

* MQTT timestamps and protocol improvements (#140)

* add TS_INPUT, TS_GRID and TS_TOTAL

* prepare MQTT timestamps

- add _set_mqtt_timestamp method
- fix hexdump printing

* push dev and debug images to docker.io

* add unix epoche timestamp for MQTT pakets

* set timezone for unit tests

* set name für setting timezone step

* trigger new action

* GEN3 and GEN3PLUS: handle multiple message

- read: iterate over the receive buffer
- forward: append messages to the forward buffer
- _update_header: iterate over the forward buffer

* GEN3: optimize timeout handling

- longer timeout in state init and reveived
- got to state pending only from state up

* update changelog

* cleanup

* print coloured logs

* Create sonarcloud.yml (#143)

* Update sonarcloud.yml

* Update sonarcloud.yml

* Update sonarcloud.yml

* Update sonarcloud.yml

* Update sonarcloud.yml

* build multi arch images with sboms (#146)

* don't send MODBUS request when state is not up (#147)

* adapt timings

* don't send MODBUS request when state is note up

* adapt unit test

* make test code more clean (#148)

* Make test code more clean (#149)

* cleanup

* Code coverage for SonarCloud (#150)


* cleanup code and unit tests

* add test coverage for SonarCloud

* configure SonarCloud

* update changelog

* Do no build on *.yml changes

* prepare release 0.10.0

* disable MODBUS_POLLING for GEN§PLUS in example config

* bump aiohttp to version 3.10.2

* code cleanup

* Fetch all history for all tags and branches

app/config/default_config.toml

@@ -31,12 +31,14 @@ inverters.allow_all = true   # allow inverters, even if we have no inverter mapp
 [inverters."R170000000000001"]
 #node_id = ''                 # Optional, MQTT replacement for inverters serial number  
 #suggested_area = ''          # Optional, suggested installation area for home-assistant
+modbus_polling = false        # Disable optional MODBUS polling
 #pv1 = {type = 'RSM40-8-395M', manufacturer = 'Risen'}   # Optional, PV module descr
 #pv2 = {type = 'RSM40-8-395M', manufacturer = 'Risen'}   # Optional, PV module descr
 
 #[inverters."R17xxxxxxxxxxxx2"]
 #node_id = ''                 # Optional, MQTT replacement for inverters serial number  
 #suggested_area = ''          # Optional, suggested installation area for home-assistant
+#modbus_polling = false        # Disable optional MODBUS polling
 #pv1 = {type = 'RSM40-8-405M', manufacturer = 'Risen'}   # Optional, PV module descr
 #pv2 = {type = 'RSM40-8-405M', manufacturer = 'Risen'}   # Optional, PV module descr
 
@@ -44,6 +46,12 @@ inverters.allow_all = true   # allow inverters, even if we have no inverter mapp
 monitor_sn = 2000000000       # The "Monitoring SN:" can be found on a sticker enclosed with the inverter
 #node_id = ''                 # Optional, MQTT replacement for inverters serial number  
 #suggested_area = ''          # Optional, suggested installation place for home-assistant
+modbus_polling = true         # Enable optional MODBUS polling
+
+# if your inverter supports SSL connections you must use the client_mode. Pls, uncomment
+# the next line and configure the fixed IP of your inverter
+#client_mode = {host = '192.168.0.1', port = 8899}  
+
 #pv1 = {type = 'RSM40-8-410M', manufacturer = 'Risen'}   # Optional, PV module descr
 #pv2 = {type = 'RSM40-8-410M', manufacturer = 'Risen'}   # Optional, PV module descr
 #pv3 = {type = 'RSM40-8-410M', manufacturer = 'Risen'}   # Optional, PV module descr