Dev 0.10 (#151)

* S allius/issue117 (#118)

* add shutdown flag

* add more register definitions

* add start commando for client side connections

* add first support for port 8899

* fix shutdown

* add client_mode configuration

* read client_mode config to setup inverter connections

* add client_mode connections over port 8899

* add preview build

* Update README.md

describe the new client-mode over port 8899 for GEN3PLUS

* MODBUS: the last digit of the inverter version is a hexadecimal number (#121)

* S allius/issue117 (#122)

* add shutdown flag

* add more register definitions

* add start commando for client side connections

* add first support for port 8899

* fix shutdown

* add client_mode configuration

* read client_mode config to setup inverter connections

* add client_mode connections over port 8899

* add preview build

* add documentation for client_mode

* catch os error and log thme with DEBUG level

* update changelog

* make the maximum output coefficient configurable (#124)

* S allius/issue120 (#126)

* add config option to disable the modbus polling

* read more modbus regs in polling mode

* extend connection timeouts if polling mode is disabled

* update changelog

* S allius/issue125 (#127)

* fix linter warning

* move sequence diagramm to wiki

* catch asyncio.CancelledError

* S allius/issue128 (#130)

* set Register.NO_INPUTS fix to 4 for GEN3PLUS

* don't set Register.NO_INPUTS per MODBUS

* fix unit tests

* register OUTPUT_COEFFICIENT at HA

* update changelog

* - Home Assistant: improve inverter status value texts

* - GEN3: add inverter status

* on closing send outstanding MQTT data to the broker

* force MQTT publish on every conn open and close

* reset inverter state on close

- workaround which reset the inverter status to
  offline when the inverter has a very low
  output power on connection close

* improve client modified
- reduce the polling cadence to 30s
- set controller statistics for HA

* client mode set controller IP for HA

* S allius/issue131 (#132)

* Make __publish_outstanding_mqtt public

* update proxy counter

- on client mode connection establishment or
  disconnecting update tje counection counter

* Update README.md (#133)

* reset inverter state on close

- workaround which reset the inverter status to
  offline when the inverter has a very low
  output power on connection close

* S allius/issue134 (#135)

* add polling invertval and method ha_remove()

* add client_mode arg to constructors

- add PollingInvervall

* hide some topics in client mode

- we hide topics in HA by sending an empty register
  MQTT topic during HA auto configuration

* add client_mode value

* update class diagram

* fix modbus close handler

- fix empty call and cleanup que
- add unit test

* don't sent an initial 1710 msg in client mode

* change HA icon for inverter status

* increase test coverage

* accelerate timer tests

* bump aiomqtt and schema to latest release (#137)

* MQTT timestamps and protocol improvements (#140)

* add TS_INPUT, TS_GRID and TS_TOTAL

* prepare MQTT timestamps

- add _set_mqtt_timestamp method
- fix hexdump printing

* push dev and debug images to docker.io

* add unix epoche timestamp for MQTT pakets

* set timezone for unit tests

* set name für setting timezone step

* trigger new action

* GEN3 and GEN3PLUS: handle multiple message

- read: iterate over the receive buffer
- forward: append messages to the forward buffer
- _update_header: iterate over the forward buffer

* GEN3: optimize timeout handling

- longer timeout in state init and reveived
- got to state pending only from state up

* update changelog

* cleanup

* print coloured logs

* Create sonarcloud.yml (#143)

* Update sonarcloud.yml

* Update sonarcloud.yml

* Update sonarcloud.yml

* Update sonarcloud.yml

* Update sonarcloud.yml

* build multi arch images with sboms (#146)

* don't send MODBUS request when state is not up (#147)

* adapt timings

* don't send MODBUS request when state is note up

* adapt unit test

* make test code more clean (#148)

* Make test code more clean (#149)

* cleanup

* Code coverage for SonarCloud (#150)


* cleanup code and unit tests

* add test coverage for SonarCloud

* configure SonarCloud

* update changelog

* Do no build on *.yml changes

* prepare release 0.10.0

* disable MODBUS_POLLING for GEN§PLUS in example config

* bump aiohttp to version 3.10.2

* code cleanup

* Fetch all history for all tags and branches

README.md

@@ -7,7 +7,7 @@
 <p align="center">
     <a href="https://opensource.org/licenses/BSD-3-Clause"><img alt="License: BSD-3-Clause" src="https://img.shields.io/badge/License-BSD_3--Clause-green.svg"></a>
     <a href="https://www.python.org/downloads/release/python-3120/"><img alt="Supported Python versions" src="https://img.shields.io/badge/python-3.12-blue.svg"></a>
-    <a href="https://sbtinstruments.github.io/aiomqtt/introduction.html"><img alt="Supported aiomqtt versions" src="https://img.shields.io/badge/aiomqtt-2.0.1-lightblue.svg"></a>
+    <a href="https://sbtinstruments.github.io/aiomqtt/introduction.html"><img alt="Supported aiomqtt versions" src="https://img.shields.io/badge/aiomqtt-2.2.0-lightblue.svg"></a>
     <a href="https://libraries.io/pypi/aiocron"><img alt="Supported aiocron versions" src="https://img.shields.io/badge/aiocron-1.8-lightblue.svg"></a>
     <a href="https://toml.io/en/v1.0.0"><img alt="Supported toml versions" src="https://img.shields.io/badge/toml-1.0.0-lightblue.svg"></a>
 </p>
@@ -165,6 +165,9 @@ pv2 = {type = 'RSM40-8-405M', manufacturer = 'Risen'}   # Optional, PV module de
 monitor_sn = 2000000000       # The "Monitoring SN:" can be found on a sticker enclosed with the inverter
 node_id = 'inv_3'             # MQTT replacement for inverters serial number  
 suggested_area = 'garage'     # suggested installation place for home-assistant
+# if your inverter supports SSL connections you must use the client_mode. Pls, uncomment
+# the next line and configure the fixed IP of your inverter
+#client_mode = {host = '192.168.0.1', port = 8899}       
 pv1 = {type = 'RSM40-8-410M', manufacturer = 'Risen'}   # Optional, PV module descr
 pv2 = {type = 'RSM40-8-410M', manufacturer = 'Risen'}   # Optional, PV module descr
 pv3 = {type = 'RSM40-8-410M', manufacturer = 'Risen'}   # Optional, PV module descr
@@ -188,8 +191,20 @@ The standard web interface of the inverter can be accessed at `http://<ip-adress
 
 For our purpose, the hidden URL `http://<ip-adress>/config_hide.html` should be called. There you can see and modify the parameters for accessing the cloud. Here we enter the IP address of our proxy and the IP port `10000` for the `Server A Setting` and for `Optional Server Setting`. The second entry is used as a backup in the event of connection problems.
 
+❗If the IP port is set to 10443 in the inverter configuration, you probably have a firmware with SSL support. In this case, you must use the client-mode configuration.
+
 If access to the web interface does not work, it can also be redirected via DNS redirection, as is necessary for the GEN3 inverters.
 
+## Client Mode (GEN3PLUS only)
+
+Newer GEN3PLUS inverters support SSL encrypted connections over port 10443 to the TSUN cloud. In this case you can't loop the proxy into this connection, since the certicate verification of the inverter don't allow this. You can configure the proxy in client-mode to establish an unencrypted connection to the inverter. For this porpuse the inverter listen on port `8899`.
+
+There are some requirements to be met:
+
+- the inverter should have a fixed IP
+- the proxy must be able to reach the inverter. You must configure a corresponding route in your router if the inverter and the proxy are in different IP networks
+- add a 'client_mode' line to your config.toml file, to specify the inverter's ip address
+
 ## DNS Settings
 
 ### Loop the proxy into the connection
@@ -226,11 +241,11 @@ In the following table you will find an overview of which inverter model has bee
 A combination with a red question mark should work, but I have not checked it in detail.
 
 <table align="center">
-  <tr><th align="center">Micro Inverter Model</th><th align="center">Fw. 1.00.06</th><th align="center">Fw. 1.00.17</th><th align="center">Fw. 1.00.20</th><th align="center">Fw. 4.0.10</th></tr>
-  <tr><td>GEN3 micro inverters (single MPPT):<br>MS300, MS350, MS400<br>MS400-D</td><td align="center">❓</td><td align="center">❓</td><td align="center">❓</td><td align="center">➖</td></tr>
-  <tr><td>GEN3 micro inverters (dual MPPT):<br>MS600, MS700, MS800<br>MS600-D, MS800-D</td><td align="center">✔️</td><td align="center">✔️</td><td align="center">✔️</td><td align="center">➖</td></tr>
-  <tr><td>GEN3 PLUS micro inverters:<br>MS1600, MS1800, MS2000<br>MS2000-D</td><td align="center">➖</td><td align="center">➖</td><td align="center">➖</td><td align="center">✔️</td></tr>
-  <tr><td>TITAN micro inverters:<br>TSOL-MP3000, MP2250, MS3000</td><td align="center">❓</td><td align="center">❓</td><td align="center">❓</td><td align="center">❓</td></tr>
+  <tr><th align="center">Micro Inverter Model</th><th align="center">Fw. 1.00.06</th><th align="center">Fw. 1.00.17</th><th align="center">Fw. 1.00.20</th><th align="center">Fw. 4.0.10</th><th align="center">Fw. 4.0.20</th></tr>
+  <tr><td>GEN3 micro inverters (single MPPT):<br>MS300, MS350, MS400<br>MS400-D</td><td align="center">❓</td><td align="center">❓</td><td align="center">❓</td><td align="center">➖</td><td align="center">➖</td></tr>
+  <tr><td>GEN3 micro inverters (dual MPPT):<br>MS600, MS700, MS800<br>MS600-D, MS800-D</td><td align="center">✔️</td><td align="center">✔️</td><td align="center">✔️</td><td align="center">➖</td><td align="center">➖</td></tr>
+  <tr><td>GEN3 PLUS micro inverters:<br>MS1600, MS1800, MS2000<br>MS2000-D</td><td align="center">➖</td><td align="center">➖</td><td align="center">➖</td><td align="center">✔️</td><td align="center">✔️</td></tr>
+  <tr><td>TITAN micro inverters:<br>TSOL-MP3000, MP2250, MS3000</td><td align="center">❓</td><td align="center">❓</td><td align="center">❓</td><td align="center">❓</td><td align="center">❓</td></tr>
 </table>
 
 ```txt