From 13b1930599c60c6dfb2b0d42980163535643ec99 Mon Sep 17 00:00:00 2001 From: Stefan Allius <122395479+s-allius@users.noreply.github.com> Date: Mon, 1 Apr 2024 23:36:43 +0200 Subject: [PATCH 1/2] Update README.md --- README.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/README.md b/README.md index a60c200..e1cb526 100644 --- a/README.md +++ b/README.md @@ -185,7 +185,7 @@ Legend ❓: proxy support possible but not testet 🚧: Proxy support in preparation ``` -❗The new inverters of the G3 Plus generation (e.g. MS-2000) use a completely different protocol for data transmission to the TSUN server. These inverters are supported from proxy version 0.6.ial numbers of these inverters start with `Y17E` instead of `R17E` +❗The new inverters of the G3 Plus generation (e.g. MS-2000) use a completely different protocol for data transmission to the TSUN server. These inverters are supported from proxy version 0.6. The serial numbers of these inverters start with `Y17E` instead of `R17E` If you have one of these combinations with a red question mark, it would be very nice if you could send me a proxy trace so that I can carry out the detailed checks and adjust the device and system tests. [Ask here how to send a trace](https://github.com/s-allius/tsun-gen3-proxy/discussions/categories/traces-for-compatibility-check) From 4da8f8f3b2f4bbc312bfada4881a02a79ac11b96 Mon Sep 17 00:00:00 2001 From: Stefan Allius <122395479+s-allius@users.noreply.github.com> Date: Tue, 2 Apr 2024 00:15:04 +0200 Subject: [PATCH 2/2] Update README.md Compatibility table --- README.md | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-) diff --git a/README.md b/README.md index e1cb526..ed7d65a 100644 --- a/README.md +++ b/README.md @@ -40,11 +40,11 @@ If you use a Pi-hole, you can also store the host entry in the Pi-hole. ## Features -- supports TSUN G3 inverters: TSOL MS-300, MS-350, MS-400, MS-600, MS-700 and MS-800 -- support for TSUN G3 Plus inverters since proxy version 0.6 (e.g. MS-2000) +- supports TSUN GEN3 inverters: TSOL MS-300, MS-350, MS-400, MS-600, MS-700 and MS-800 +- support for TSUN GEN3 PLUS inverters since proxy version 0.6 (e.g. MS-2000) - `MQTT` support - `Home-Assistant` auto-discovery support -- Self-sufficient island operation without internet (for TSUN G3 Plus inverters in preparation) +- Self-sufficient island operation without internet (for TSUN GEN3 PLUS inverters in preparation) - non-root Docker Container ## Home Assistant Screenshots @@ -94,12 +94,12 @@ You find more details here: https://toml.io/en/v1.0.0 ```toml -# configuration for tsun cloud for 'generation 3' inverters +# configuration for tsun cloud for 'GEN3' inverters tsun.enabled = true # false: disables connecting to the tsun cloud, and avoids updates tsun.host = 'logger.talent-monitoring.com' tsun.port = 5005 -# configuration for solarman cloud for 'generation 3 plus' inverters +# configuration for solarman cloud for 'GEN3 PLUS' inverters solarman.enabled = true # false: disables connecting to the tsun cloud, and avoids updates solarman.host = 'iot.talent-monitoring.com' solarman.port = 10000 @@ -148,7 +148,7 @@ suggested_area = 'garage' # suggested installation place for home-assistant ### Loop the proxy into the connection To include the proxy in the connection between the inverter and the TSUN Cloud, you must adapt the DNS record of *logger.talent-monitoring.com* within the network that your inverter uses. You need a mapping from logger.talent-monitoring.com to the IP address of the host running the Docker engine. -The new Generation 3 Plus inverters use a different URL. Here, *iot.talent-monitoring.com* must be redirected. +The new GEN3 PLUS inverters use a different URL. Here, *iot.talent-monitoring.com* must be redirected. This can be done, for example, by adding a local DNS record to the Pi-hole if you are using it. @@ -173,11 +173,11 @@ A combination with a red question mark should work, but I have not checked it in Micro Inverter Model | Fw. 1.00.06 | Fw. 1.00.17 | Fw. 1.00.20| Fw. 1.1.00.0B :---|:---:|:---:|:---:|:---:| -G3 micro inverters (single MPPT):
MS-300, MS-350, MS-400| ❓ | ❓ | ❓ |βž– -G3 micro inverters (dual MPPT):
MS-600, MS-700, MS-800| βœ”οΈ | βœ”οΈ | βœ”οΈ |βž– -G3 Plus micro inverters:
MS-1600, MS-1800, MS-2000| βž– |βž– | βž– | 🚧 -balcony micro inverters:
MS-400-D, MS-800-D, MS-2000-D| ❓ | ❓ | ❓| ❓ - +GEN3 micro inverters (single MPPT):
MS300, MS350,MS-400| ❓ | ❓ | ❓ |βž– +GEN3 micro inverters (dual MPPT):
MS600, MS700, MS800| βœ”οΈ | βœ”οΈ | βœ”οΈ |βž– +GEN3 PLUS micro inverters:
MS1600, MS1800, MS2000| βž– |βž– | βž– | βœ”οΈ +Balcony micro inverters:
MS400-D, MS800-D, MS2000-D| ❓ | ❓ | ❓| ❓ +TITAN micro inverters:
TSOL-MP3000, MP2250, MS3000| ❓ | ❓ | ❓| ❓ ``` Legend βž–: Firmware not available for this devices @@ -185,7 +185,7 @@ Legend ❓: proxy support possible but not testet 🚧: Proxy support in preparation ``` -❗The new inverters of the G3 Plus generation (e.g. MS-2000) use a completely different protocol for data transmission to the TSUN server. These inverters are supported from proxy version 0.6. The serial numbers of these inverters start with `Y17E` instead of `R17E` +❗The new inverters of the GEN3 Plus generation (e.g. MS-2000) use a completely different protocol for data transmission to the TSUN server. These inverters are supported from proxy version 0.6. The serial numbers of these inverters start with `Y17E` instead of `R17E` If you have one of these combinations with a red question mark, it would be very nice if you could send me a proxy trace so that I can carry out the detailed checks and adjust the device and system tests. [Ask here how to send a trace](https://github.com/s-allius/tsun-gen3-proxy/discussions/categories/traces-for-compatibility-check)