---
configuration:
  inverters:
    name: Inverters
    description: >+
      For each GEN3 inverter, the serial number of the inverter must be mapped to an MQTT
      definition. To do this, the corresponding configuration block is started with
      <16-digit serial number> so that all subsequent parameters are assigned
      to this inverter. Further inverter-specific parameters (e.g. polling mode) can be set
      in the configuration block

      The serial numbers of all GEN3 inverters start with `R17`!

      monitor_sn         # The GEN3PLUS "Monitoring SN:"
      node_id            # MQTT replacement for inverters serial number
      suggested_area     # suggested installation area for home-assistant
      modbus_polling     # Disable optional MODBUS polling
      pv1                # Optional, PV module descr
      pv2                # Optional, PV module descr

  tsun.enabled:
    name: Connection to TSUN Cloud - for GEN3 inverter only
    description: >-
      switch on/off connection to the TSUN cloud
      This connection is only required if you want send data to the TSUN cloud
      eg. to use the TSUN APPs or receive firmware updates.
      
      on - normal proxy operation
      off - The Inverter become isolated from Internet
  solarman.enabled:
    name: Connection to Solarman Cloud - for GEN3PLUS inverter only
    description: >-
      switch on/off connection to the Solarman cloud
      This connection is only required if you want send data to the Solarman cloud
      eg. to use the Solarman APPs or receive firmware updates.
      
      on - normal proxy operation
      off - The Inverter become isolated from Internet
  inverters.allow_all:
    name: Allow all connections from all inverters
    description: >-
      The proxy only usually accepts connections from known inverters.
      Switch on for test purposes and unknown serial numbers.
  mqtt.host:
    name: MQTT Broker Host
    description: >-
      Hostname or IP address of the MQTT broker. if not set, the addon will try to connect to the Home Assistant MQTT broker
  mqtt.port:
    name: MQTT Broker Port
    description: >-
      Port of the MQTT broker. if not set, the addon will try to connect to the Home Assistant MQTT broker
  mqtt.user:
    name: MQTT Broker User
    description: >-
      User for the MQTT broker. if not set, the addon will try to connect to the Home Assistant MQTT broker
  mqtt.passwd:
    name: MQTT Broker Password
    description: >-
      Password for the MQTT broker. if not set, the addon will try to connect to the Home Assistant MQTT broker
  ha.auto_conf_prefix:
    name: MQTT prefix for subscribing for homeassistant status updates
  ha.discovery_prefix:
    name: MQTT prefix for discovery topic
  ha.entity_prefix:
    name: MQTT topic prefix for publishing inverter values
  ha.proxy_node_id:
    name: MQTT node id, for the proxy_node_id
  ha.proxy_unique_id:
    name: MQTT unique id, to identify a proxy instance
  tsun.host:
    name: TSUN Cloud Host
    description: >-
      Hostname or IP address of the TSUN cloud. if not set, the addon will try to connect to the cloud default
      on logger.talent-monitoring.com
  solarman.host:
    name: Solarman Cloud Host
    description: >-
      Hostname or IP address of the Solarman cloud. if not set, the addon will try to connect to the cloud default
      on iot.talent-monitoring.com


network:
  8127/tcp: x...
  5005/tcp: listening Port for TSUN GEN3 Devices
  10000/tcp: listening Port for TSUN GEN3PLUS Devices