/** * Marlin 3D Printer Firmware * Copyright (c) 2023 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * * Based on Sprinter and grbl. * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 3 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program. If not, see . * */ #pragma once /** * JOKER pin assignments */ #include "env_validate.h" #define BOARD_INFO_NAME "JOKER" #define DEFAULT_MACHINE_NAME BOARD_INFO_NAME // // Expansion Boards for more axes, sensors, heaters // Only enable one of these options. // //#define JOKER_PLUS_2 //#define JOKER_PLUS_5 #if ENABLED(JOKER_PLUS_2) #define MAX_EXTRUDERS 2 #if E_STEPPERS > 2 #error "JOKER with +2 expansion supports up to 2 E steppers." #elif HOTENDS > 2 #error "JOKER with +2 expansion supports up to 2 hotends." #endif #elif ENABLED(JOKER_PLUS_5) #define MAX_EXTRUDERS 3 #if E_STEPPERS > 3 #error "JOKER with +5 expansion supports up to 3 E steppers." #elif HOTENDS > 3 #error "JOKER with +5 expansion supports up to 3 hotends." #endif #else #if E_STEPPERS > 1 #error "JOKER without expansion only supports 1 E stepper." #elif HAS_MULTI_HOTEND #error "JOKER without expansion only supports 1 hotend." #endif #endif // // Servos // #define SERVO0_PIN 14 // // Limit Switches // #define X_STOP_PIN 15 #define Y_STOP_PIN 16 #define Z_STOP_PIN 17 // // Filament Runout Sensor // #ifndef FIL_RUNOUT_PIN #define FIL_RUNOUT_PIN 13 #endif #ifndef Z_MIN_PROBE_PIN //#define Z_MIN_PROBE_PIN 35 // Pin 35 is the RAMPS default #endif // // Enable I2S stepper stream // #define I2S_STEPPER_STREAM #if ENABLED(I2S_STEPPER_STREAM) #define I2S_WS 26 #define I2S_BCK 25 #define I2S_DATA 27 #if ENABLED(LIN_ADVANCE) #error "I2S stream is currently incompatible with LIN_ADVANCE." #endif #endif // // Steppers // #define X_STEP_PIN 128 #define X_DIR_PIN 129 #define X_ENABLE_PIN 136 #define Y_STEP_PIN 130 #define Y_DIR_PIN 131 #define Y_ENABLE_PIN X_ENABLE_PIN #define Z_STEP_PIN 132 #define Z_DIR_PIN 133 #define Z_ENABLE_PIN 137 #define E0_STEP_PIN 134 #define E0_DIR_PIN 135 #define E0_ENABLE_PIN 138 #if ENABLED(JOKER_PLUS_2) #define E1_STEP_PIN 144 #define E1_DIR_PIN 145 #define E1_ENABLE_PIN 146 #define E2_STEP_PIN 147 #define E2_DIR_PIN 148 #define E2_ENABLE_PIN 149 #elif ENABLED(JOKER_PLUS_5) #define E1_STEP_PIN 144 #define E1_DIR_PIN 145 #define E1_ENABLE_PIN 146 #define E2_STEP_PIN 153 #define E2_DIR_PIN 154 #define E2_ENABLE_PIN 155 #define E3_STEP_PIN 156 #define E3_DIR_PIN 157 #define E3_ENABLE_PIN 158 // Are these preferred for X2, Y2, Z2, Z3 ? #define E4_STEP_PIN 147 #define E4_DIR_PIN 148 #define E4_ENABLE_PIN 149 #define E5_STEP_PIN 150 #define E5_DIR_PIN 151 #define E5_ENABLE_PIN 152 #endif // // Temperature Sensors // #define TEMP_0_PIN 36 // Analog Input #define TEMP_BED_PIN 39 // Analog Input #if ENABLED(JOKER_PLUS_2) #define TEMP_1_PIN 34 // Analog Input #elif ENABLED(JOKER_PLUS_5) #define TEMP_1_PIN 32 // Analog Input #define TEMP_2_PIN 33 // Analog Input #define TEMP_3_PIN 34 // Analog Input #endif // // Heaters / Fans // #define HEATER_0_PIN 141 #define HEATER_BED_PIN 140 #define FAN0_PIN 143 #ifndef E0_AUTO_FAN_PIN #define E0_AUTO_FAN_PIN 142 // Enabled in Configuration_adv.h #endif #ifndef CONTROLLER_FAN_PIN //#define CONTROLLER_FAN_PIN -1 #endif #if ENABLED(JOKER_PLUS_2) #define HEATER_1_PIN 150 #define FAN1_PIN 151 #elif ENABLED(JOKER_PLUS_5) #define HEATER_1_PIN 159 #define HEATER_2_PIN 160 #define HEATER_3_PIN 161 #define FAN1_PIN 162 #define FAN2_PIN 163 #define FAN3_PIN 164 #ifndef E1_AUTO_FAN_PIN #define E1_AUTO_FAN_PIN 165 #endif #ifndef E2_AUTO_FAN_PIN #define E2_AUTO_FAN_PIN 166 #endif #ifndef E3_AUTO_FAN_PIN #define E3_AUTO_FAN_PIN 167 #endif #endif // // SD Card // #define SD_MOSI_PIN 23 #define SD_MISO_PIN 19 #define SD_SCK_PIN 18 #define SDSS 5 #define USES_SHARED_SPI // SPI is shared by SD card with TMC SPI drivers // // LCD / Controller // #if HAS_WIRED_LCD //#define LCD_PINS_RS 13 //#define LCD_PINS_ENABLE 17 //#define LCD_PINS_D4 16 #if ENABLED(CR10_STOCKDISPLAY) #define BEEPER_PIN 151 #elif IS_RRD_FG_SC #define BEEPER_PIN 151 //#define LCD_PINS_D5 -1 //#define LCD_PINS_D6 -1 //#define LCD_PINS_D7 -1 #endif #define BTN_EN1 2 #define BTN_EN2 4 #define BTN_ENC 12 #define BEEPER_PIN 139 #endif // HAS_WIRED_LCD /** * Hardware Serial * Add the following to Configuration.h or Configuration_adv.h to assign * specific pins to hardware Serial1 and Serial2. * Note: Serial2 can be defined using HARDWARE_SERIAL2_RX and HARDWARE_SERIAL2_TX but * JOKER does not have enough spare pins for such reassignment. */ //#define HARDWARE_SERIAL1_RX 21 //#define HARDWARE_SERIAL1_TX 22 //#define HARDWARE_SERIAL2_RX 2 //#define HARDWARE_SERIAL2_TX 4 // // M3/M4/M5 - Spindle/Laser Control // #if HAS_CUTTER #define SPINDLE_LASER_ENA_PIN -1 // FET 1 #define SPINDLE_LASER_PWM_PIN 33 // Bed FET //#define SPINDLE_DIR_PIN -1 // FET 3 #endif