sv/Marlin
1
1
Fork 0
Code Issues Pull Requests Wiki Activity

🔨 Adjust INI comments (#25183)

Browse Source
This commit is contained in:
EvilGremlin
2023-02-09 06:46:02 +03:00
committed by Sven Soost
parent f58ebcbbc1
commit b8913b19af
4 changed files with 29 additions and 24 deletions
Download Patch File Download Diff File Expand all files Collapse all files

15
ini/stm32f1.ini
View File

@@ -135,7 +135,11 @@ debug_tool = jlink
upload_protocol = jlink
#
# Custom upload to SD via Marlin with Binary Protocol
# Creality (STM32F103Rx)
# With custom upload to SD via Marlin with binary protocol.
# Requires Marlin with BINARY_FILE_TRANSFER already installed on the target board.
# If CUSTOM_FIRMWARE_UPLOAD is also installed, Marlin will reboot the board to install the firmware.
# Currently CUSTOM_FIRMWARE_UPLOAD must also be enabled to use 'xfer' build envs.
#
[STM32F103Rx_creality_xfer]
extends = STM32F103Rx_creality
@@ -151,10 +155,16 @@ upload_protocol = custom
extends = STM32F103Rx_creality
board = genericSTM32F103RE
#
# Creality 512K (STM32F103RE) with custom binary upload to SD (see above).
#
[env:STM32F103RE_creality_xfer]
extends = STM32F103Rx_creality_xfer
board = genericSTM32F103RE
#
# Creality 512K (STM32F103RE) for new 64KiB bootloader (CR-10 Smart Pro printer)
#
[env:STM32F103RE_creality_smartPro]
extends = STM32F103Rx_creality
board_build.offset = 0x10000
@@ -167,6 +177,9 @@ board_upload.offset_address = 0x08010000
extends = STM32F103Rx_creality
board = genericSTM32F103RC
#
# Creality 256K (STM32F103RC) with custom binary upload to SD (see above).
#
[env:STM32F103RC_creality_xfer]
extends = STM32F103Rx_creality_xfer
board = genericSTM32F103RC