From 6bcbcb17da9230e443dfc90641f7a25f6f481fb1 Mon Sep 17 00:00:00 2001
From: efflicto <sven.soost@googlemail.com>
Date: Tue, 26 Dec 2023 17:11:15 +0100
Subject: [PATCH] Tweaks

---
 Marlin/Configuration.h     | 22 +++++++++++-----------
 Marlin/Configuration_adv.h |  6 +++---
 2 files changed, 14 insertions(+), 14 deletions(-)

diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h
index 48b2fd4ac6..584cf40ba2 100644
--- a/Marlin/Configuration.h
+++ b/Marlin/Configuration.h
@@ -627,7 +627,7 @@
 #define HEATER_5_MAXTEMP 275
 #define HEATER_6_MAXTEMP 275
 #define HEATER_7_MAXTEMP 275
-#define BED_MAXTEMP      60
+#define BED_MAXTEMP      80
 #define CHAMBER_MAXTEMP  60
 
 /**
@@ -667,9 +667,9 @@
     #define DEFAULT_Ki_LIST {   1.08,   1.08 }
     #define DEFAULT_Kd_LIST { 114.00, 114.00 }
   #else
-    #define DEFAULT_Kp 24.39
-    #define DEFAULT_Ki 2.29
-    #define DEFAULT_Kd 64.88
+    #define DEFAULT_Kp 29.19
+    #define DEFAULT_Ki 3.15
+    #define DEFAULT_Kd 67.73
   #endif
 #endif
 
@@ -752,9 +752,9 @@
 
   // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
   // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
-  #define DEFAULT_bedKp 95.54
-  #define DEFAULT_bedKi 18.66
-  #define DEFAULT_bedKd 326.13
+  #define DEFAULT_bedKp 53.46
+  #define DEFAULT_bedKi 7.77
+  #define DEFAULT_bedKd 245.18
 
   // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
 #endif // PIDTEMPBED
@@ -1168,7 +1168,7 @@
  * Override with M92
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
-#define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 105.202 }
+#define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 100.671 }
 
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
@@ -1203,9 +1203,9 @@
  *   M204 R    Retract Acceleration
  *   M204 T    Travel Acceleration
  */
-#define DEFAULT_ACCELERATION          500    // X, Y, Z and E acceleration for printing moves
+#define DEFAULT_ACCELERATION          1500    // X, Y, Z and E acceleration for printing moves
 #define DEFAULT_RETRACT_ACCELERATION  500    // E acceleration for retracts
-#define DEFAULT_TRAVEL_ACCELERATION   500    // X, Y, Z acceleration for travel (non printing) moves
+#define DEFAULT_TRAVEL_ACCELERATION   2000    // X, Y, Z acceleration for travel (non printing) moves
 
 /**
  * Default Jerk limits (mm/s)
@@ -1483,7 +1483,7 @@
  *     |    [-]    |
  *     O-- FRONT --+
  */
-#define NOZZLE_TO_PROBE_OFFSET { -37.00, -12.00, -0.875 }
+#define NOZZLE_TO_PROBE_OFFSET { -38.00, -10.00, -0.9 }
 
 // Most probes should stay away from the edges of the bed, but
 // with NOZZLE_AS_PROBE this can be negative for a wider probing area.
diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h
index 12aaa55f3c..9366825426 100644
--- a/Marlin/Configuration_adv.h
+++ b/Marlin/Configuration_adv.h
@@ -1373,17 +1373,17 @@
 //#define LCD_BACKLIGHT_TIMEOUT_MINS 1  // (minutes) Timeout before turning off the backlight
 
 #if HAS_BED_PROBE && EITHER(HAS_MARLINUI_MENU, HAS_TFT_LVGL_UI)
-  //#define PROBE_OFFSET_WIZARD       // Add a Probe Z Offset calibration option to the LCD menu
+  #define PROBE_OFFSET_WIZARD       // Add a Probe Z Offset calibration option to the LCD menu
   #if ENABLED(PROBE_OFFSET_WIZARD)
     /**
      * Enable to init the Probe Z-Offset when starting the Wizard.
      * Use a height slightly above the estimated nozzle-to-probe Z offset.
      * For example, with an offset of -5, consider a starting height of -4.
      */
-    //#define PROBE_OFFSET_WIZARD_START_Z -4.0
+    #define PROBE_OFFSET_WIZARD_START_Z -4.0
 
     // Set a convenient position to do the calibration (probing point and nozzle/bed-distance)
-    //#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
+    #define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
   #endif
 #endif