sv/Marlin
1
1
Fork 0
Code Issues Pull Requests Wiki Activity

✨ BigTreeTech Manta M4P, M5P, M8P V1.0 / 1.1, E3 EZ (#25001)

Browse Source
This commit is contained in:
Keith Bennett
2023-02-07 22:39:09 -08:00
committed by Sven Soost
parent d58daf80f5
commit 6768759d96
21 changed files with 3057 additions and 155 deletions
Download Patch File Download Diff File Expand all files Collapse all files

302
Marlin/src/core/boards.h
View File

@@ -221,7 +221,7 @@
#define BOARD_5DPRINT 1707 // 5DPrint D8 Driver Board
//
// LPC1768 ARM Cortex M3
// LPC1768 ARM Cortex-M3
//
#define BOARD_RAMPS_14_RE_ARM_EFB 2000 // Re-ARM with RAMPS 1.4 (Power outputs: Hotend, Fan, Bed)
@@ -242,7 +242,7 @@
#define BOARD_EMOTRONIC 2015 // eMotion-Tech eMotronic
//
// LPC1769 ARM Cortex M3
// LPC1769 ARM Cortex-M3
//
#define BOARD_MKS_SGEN 2500 // MKS-SGen
@@ -259,7 +259,7 @@
#define BOARD_FLY_CDY 2511 // FLYmaker FLY CDY
//
// SAM3X8E ARM Cortex M3
// SAM3X8E ARM Cortex-M3
//
#define BOARD_DUE3DOM 3000 // DUE3DOM for Arduino DUE
@@ -292,185 +292,195 @@
#define BOARD_KRATOS32 3027 // K.3D Kratos32 (Arduino Due Shield)
//
// SAM3X8C ARM Cortex M3
// SAM3X8C ARM Cortex-M3
//
#define BOARD_PRINTRBOARD_G2 3100 // Printrboard G2
#define BOARD_ADSK 3101 // Arduino DUE Shield Kit (ADSK)
//
// STM32 ARM Cortex-M0+
//
#define BOARD_BTT_EBB42_V1_1 4000 // BigTreeTech EBB42 V1.1 (STM32G0B1CB)
#define BOARD_BTT_SKR_MINI_E3_V3_0 4001 // BigTreeTech SKR Mini E3 V3.0 (STM32G0B1RE)
#define BOARD_BTT_MANTA_E3_EZ_V1_0 4002 // BigTreeTech Manta E3 EZ V1.0 (STM32G0B1RE)
#define BOARD_BTT_MANTA_M4P_V1_0 4003 // BigTreeTech Manta M4P V1.0 (STM32G0B1RE)
#define BOARD_BTT_MANTA_M5P_V1_0 4004 // BigTreeTech Manta M5P V1.0 (STM32G0B1RE)
#define BOARD_BTT_MANTA_M8P_V1_0 4005 // BigTreeTech Manta M8P V1.0 (STM32G0B1VE)
#define BOARD_BTT_MANTA_M8P_V1_1 4006 // BigTreeTech Manta M8P V1.1 (STM32G0B1VE)
//
// STM32 ARM Cortex-M3
//
#define BOARD_MALYAN_M200_V2 4000 // STM32F070CB controller
#define BOARD_MALYAN_M300 4001 // STM32F070-based delta
#define BOARD_STM32F103RE 4002 // STM32F103RE Libmaple-based STM32F1 controller
#define BOARD_MALYAN_M200 4003 // STM32C8 Libmaple-based STM32F1 controller
#define BOARD_STM3R_MINI 4004 // STM32F103RE Libmaple-based STM32F1 controller
#define BOARD_GTM32_PRO_VB 4005 // STM32F103VE controller
#define BOARD_GTM32_MINI 4006 // STM32F103VE controller
#define BOARD_GTM32_MINI_A30 4007 // STM32F103VE controller
#define BOARD_GTM32_REV_B 4008 // STM32F103VE controller
#define BOARD_MORPHEUS 4009 // STM32F103C8 / STM32F103CB Libmaple-based STM32F1 controller
#define BOARD_CHITU3D 4010 // Chitu3D (STM32F103RE)
#define BOARD_MKS_ROBIN 4011 // MKS Robin (STM32F103ZE)
#define BOARD_MKS_ROBIN_MINI 4012 // MKS Robin Mini (STM32F103VE)
#define BOARD_MKS_ROBIN_NANO 4013 // MKS Robin Nano (STM32F103VE)
#define BOARD_MKS_ROBIN_NANO_V2 4014 // MKS Robin Nano V2 (STM32F103VE)
#define BOARD_MKS_ROBIN_LITE 4015 // MKS Robin Lite/Lite2 (STM32F103RC)
#define BOARD_MKS_ROBIN_LITE3 4016 // MKS Robin Lite3 (STM32F103RC)
#define BOARD_MKS_ROBIN_PRO 4017 // MKS Robin Pro (STM32F103ZE)
#define BOARD_MKS_ROBIN_E3 4018 // MKS Robin E3 (STM32F103RC)
#define BOARD_MKS_ROBIN_E3_V1_1 4019 // MKS Robin E3 V1.1 (STM32F103RC)
#define BOARD_MKS_ROBIN_E3D 4020 // MKS Robin E3D (STM32F103RC)
#define BOARD_MKS_ROBIN_E3D_V1_1 4021 // MKS Robin E3D V1.1 (STM32F103RC)
#define BOARD_MKS_ROBIN_E3P 4022 // MKS Robin E3p (STM32F103VE)
#define BOARD_BTT_EBB42_V1_1 4023 // BigTreeTech EBB42 V1.1 (STM32G0B1CB)
#define BOARD_BTT_SKR_MINI_V1_1 4024 // BigTreeTech SKR Mini v1.1 (STM32F103RC)
#define BOARD_BTT_SKR_MINI_E3_V1_0 4025 // BigTreeTech SKR Mini E3 (STM32F103RC)
#define BOARD_BTT_SKR_MINI_E3_V1_2 4026 // BigTreeTech SKR Mini E3 V1.2 (STM32F103RC)
#define BOARD_BTT_SKR_MINI_E3_V2_0 4027 // BigTreeTech SKR Mini E3 V2.0 (STM32F103RC / STM32F103RE)
#define BOARD_BTT_SKR_MINI_E3_V3_0 4028 // BigTreeTech SKR Mini E3 V3.0 (STM32G0B1RE)
#define BOARD_BTT_SKR_MINI_E3_V3_0_1 4029 // BigTreeTech SKR Mini E3 V3.0.1 (STM32F401RC)
#define BOARD_BTT_SKR_MINI_MZ_V1_0 4030 // BigTreeTech SKR Mini MZ V1.0 (STM32F103RC)
#define BOARD_BTT_SKR_E3_DIP 4031 // BigTreeTech SKR E3 DIP V1.0 (STM32F103RC / STM32F103RE)
#define BOARD_BTT_SKR_CR6 4032 // BigTreeTech SKR CR6 v1.0 (STM32F103RE)
#define BOARD_JGAURORA_A5S_A1 4033 // JGAurora A5S A1 (STM32F103ZE)
#define BOARD_FYSETC_AIO_II 4034 // FYSETC AIO_II (STM32F103RC)
#define BOARD_FYSETC_CHEETAH 4035 // FYSETC Cheetah (STM32F103RC)
#define BOARD_FYSETC_CHEETAH_V12 4036 // FYSETC Cheetah V1.2 (STM32F103RC)
#define BOARD_LONGER3D_LK 4037 // Longer3D LK1/2 - Alfawise U20/U20+/U30 (STM32F103VE)
#define BOARD_CCROBOT_MEEB_3DP 4038 // ccrobot-online.com MEEB_3DP (STM32F103RC)
#define BOARD_CHITU3D_V5 4039 // Chitu3D TronXY X5SA V5 Board (STM32F103ZE)
#define BOARD_CHITU3D_V6 4040 // Chitu3D TronXY X5SA V6 Board (STM32F103ZE)
#define BOARD_CHITU3D_V9 4041 // Chitu3D TronXY X5SA V9 Board (STM32F103ZE)
#define BOARD_CREALITY_V4 4042 // Creality v4.x (STM32F103RC / STM32F103RE)
#define BOARD_CREALITY_V422 4043 // Creality v4.2.2 (STM32F103RC / STM32F103RE)
#define BOARD_CREALITY_V423 4044 // Creality v4.2.3 (STM32F103RC / STM32F103RE)
#define BOARD_CREALITY_V425 4045 // Creality v4.2.5 (STM32F103RC / STM32F103RE)
#define BOARD_CREALITY_V427 4046 // Creality v4.2.7 (STM32F103RC / STM32F103RE)
#define BOARD_CREALITY_V4210 4047 // Creality v4.2.10 (STM32F103RC / STM32F103RE) as found in the CR-30
#define BOARD_CREALITY_V431 4048 // Creality v4.3.1 (STM32F103RC / STM32F103RE)
#define BOARD_CREALITY_V431_A 4049 // Creality v4.3.1a (STM32F103RC / STM32F103RE)
#define BOARD_CREALITY_V431_B 4050 // Creality v4.3.1b (STM32F103RC / STM32F103RE)
#define BOARD_CREALITY_V431_C 4051 // Creality v4.3.1c (STM32F103RC / STM32F103RE)
#define BOARD_CREALITY_V431_D 4052 // Creality v4.3.1d (STM32F103RC / STM32F103RE)
#define BOARD_CREALITY_V452 4053 // Creality v4.5.2 (STM32F103RC / STM32F103RE)
#define BOARD_CREALITY_V453 4054 // Creality v4.5.3 (STM32F103RC / STM32F103RE)
#define BOARD_CREALITY_V521 4055 // Creality v5.2.1 (STM32F103VE) as found in the SV04
#define BOARD_CREALITY_V24S1 4056 // Creality v2.4.S1 (STM32F103RC / STM32F103RE) v101 as found in the Ender-7
#define BOARD_CREALITY_V24S1_301 4057 // Creality v2.4.S1_301 (STM32F103RC / STM32F103RE) v301 as found in the Ender-3 S1
#define BOARD_CREALITY_V25S1 4058 // Creality v2.5.S1 (STM32F103RE) as found in the CR-10 Smart Pro
#define BOARD_TRIGORILLA_PRO 4059 // Trigorilla Pro (STM32F103ZE)
#define BOARD_FLY_MINI 4060 // FLYmaker FLY MINI (STM32F103RC)
#define BOARD_FLSUN_HISPEED 4061 // FLSUN HiSpeedV1 (STM32F103VE)
#define BOARD_BEAST 4062 // STM32F103RE Libmaple-based controller
#define BOARD_MINGDA_MPX_ARM_MINI 4063 // STM32F103ZE Mingda MD-16
#define BOARD_GTM32_PRO_VD 4064 // STM32F103VE controller
#define BOARD_ZONESTAR_ZM3E2 4065 // Zonestar ZM3E2 (STM32F103RC)
#define BOARD_ZONESTAR_ZM3E4 4066 // Zonestar ZM3E4 V1 (STM32F103VC)
#define BOARD_ZONESTAR_ZM3E4V2 4067 // Zonestar ZM3E4 V2 (STM32F103VC)
#define BOARD_ERYONE_ERY32_MINI 4068 // Eryone Ery32 mini (STM32F103VE)
#define BOARD_PANDA_PI_V29 4069 // Panda Pi V2.9 - Standalone (STM32F103RC)
#define BOARD_MALYAN_M200_V2 5000 // STM32F070CB controller
#define BOARD_MALYAN_M300 5001 // STM32F070-based delta
#define BOARD_STM32F103RE 5002 // STM32F103RE Libmaple-based STM32F1 controller
#define BOARD_MALYAN_M200 5003 // STM32C8 Libmaple-based STM32F1 controller
#define BOARD_STM3R_MINI 5004 // STM32F103RE Libmaple-based STM32F1 controller
#define BOARD_GTM32_PRO_VB 5005 // STM32F103VE controller
#define BOARD_GTM32_MINI 5006 // STM32F103VE controller
#define BOARD_GTM32_MINI_A30 5007 // STM32F103VE controller
#define BOARD_GTM32_REV_B 5008 // STM32F103VE controller
#define BOARD_MORPHEUS 5009 // STM32F103C8 / STM32F103CB Libmaple-based STM32F1 controller
#define BOARD_CHITU3D 5010 // Chitu3D (STM32F103RE)
#define BOARD_MKS_ROBIN 5011 // MKS Robin (STM32F103ZE)
#define BOARD_MKS_ROBIN_MINI 5012 // MKS Robin Mini (STM32F103VE)
#define BOARD_MKS_ROBIN_NANO 5013 // MKS Robin Nano (STM32F103VE)
#define BOARD_MKS_ROBIN_NANO_V2 5014 // MKS Robin Nano V2 (STM32F103VE)
#define BOARD_MKS_ROBIN_LITE 5015 // MKS Robin Lite/Lite2 (STM32F103RC)
#define BOARD_MKS_ROBIN_LITE3 5016 // MKS Robin Lite3 (STM32F103RC)
#define BOARD_MKS_ROBIN_PRO 5017 // MKS Robin Pro (STM32F103ZE)
#define BOARD_MKS_ROBIN_E3 5018 // MKS Robin E3 (STM32F103RC)
#define BOARD_MKS_ROBIN_E3_V1_1 5019 // MKS Robin E3 V1.1 (STM32F103RC)
#define BOARD_MKS_ROBIN_E3D 5020 // MKS Robin E3D (STM32F103RC)
#define BOARD_MKS_ROBIN_E3D_V1_1 5021 // MKS Robin E3D V1.1 (STM32F103RC)
#define BOARD_MKS_ROBIN_E3P 5022 // MKS Robin E3P (STM32F103VE)
#define BOARD_BTT_SKR_MINI_V1_1 5023 // BigTreeTech SKR Mini v1.1 (STM32F103RC)
#define BOARD_BTT_SKR_MINI_E3_V1_0 5024 // BigTreeTech SKR Mini E3 (STM32F103RC)
#define BOARD_BTT_SKR_MINI_E3_V1_2 5025 // BigTreeTech SKR Mini E3 V1.2 (STM32F103RC)
#define BOARD_BTT_SKR_MINI_E3_V2_0 5026 // BigTreeTech SKR Mini E3 V2.0 (STM32F103RC / STM32F103RE)
#define BOARD_BTT_SKR_MINI_MZ_V1_0 5027 // BigTreeTech SKR Mini MZ V1.0 (STM32F103RC)
#define BOARD_BTT_SKR_E3_DIP 5028 // BigTreeTech SKR E3 DIP V1.0 (STM32F103RC / STM32F103RE)
#define BOARD_BTT_SKR_CR6 5029 // BigTreeTech SKR CR6 v1.0 (STM32F103RE)
#define BOARD_JGAURORA_A5S_A1 5030 // JGAurora A5S A1 (STM32F103ZE)
#define BOARD_FYSETC_AIO_II 5031 // FYSETC AIO_II (STM32F103RC)
#define BOARD_FYSETC_CHEETAH 5032 // FYSETC Cheetah (STM32F103RC)
#define BOARD_FYSETC_CHEETAH_V12 5033 // FYSETC Cheetah V1.2 (STM32F103RC)
#define BOARD_LONGER3D_LK 5034 // Longer3D LK1/2 - Alfawise U20/U20+/U30 (STM32F103VE)
#define BOARD_CCROBOT_MEEB_3DP 5035 // ccrobot-online.com MEEB_3DP (STM32F103RC)
#define BOARD_CHITU3D_V5 5036 // Chitu3D TronXY X5SA V5 Board (STM32F103ZE)
#define BOARD_CHITU3D_V6 5037 // Chitu3D TronXY X5SA V6 Board (STM32F103ZE)
#define BOARD_CHITU3D_V9 5038 // Chitu3D TronXY X5SA V9 Board (STM32F103ZE)
#define BOARD_CREALITY_V4 5039 // Creality v4.x (STM32F103RC / STM32F103RE)
#define BOARD_CREALITY_V422 5040 // Creality v4.2.2 (STM32F103RC / STM32F103RE)
#define BOARD_CREALITY_V423 5041 // Creality v4.2.3 (STM32F103RC / STM32F103RE)
#define BOARD_CREALITY_V425 5042 // Creality v4.2.5 (STM32F103RC / STM32F103RE)
#define BOARD_CREALITY_V427 5043 // Creality v4.2.7 (STM32F103RC / STM32F103RE)
#define BOARD_CREALITY_V4210 5044 // Creality v4.2.10 (STM32F103RC / STM32F103RE) as found in the CR-30
#define BOARD_CREALITY_V431 5045 // Creality v4.3.1 (STM32F103RC / STM32F103RE)
#define BOARD_CREALITY_V431_A 5046 // Creality v4.3.1a (STM32F103RC / STM32F103RE)
#define BOARD_CREALITY_V431_B 5047 // Creality v4.3.1b (STM32F103RC / STM32F103RE)
#define BOARD_CREALITY_V431_C 5048 // Creality v4.3.1c (STM32F103RC / STM32F103RE)
#define BOARD_CREALITY_V431_D 5049 // Creality v4.3.1d (STM32F103RC / STM32F103RE)
#define BOARD_CREALITY_V452 5050 // Creality v4.5.2 (STM32F103RC / STM32F103RE)
#define BOARD_CREALITY_V453 5051 // Creality v4.5.3 (STM32F103RC / STM32F103RE)
#define BOARD_CREALITY_V521 5052 // Creality v5.2.1 (STM32F103VE) as found in the SV04
#define BOARD_CREALITY_V24S1 5053 // Creality v2.4.S1 (STM32F103RC / STM32F103RE) v101 as found in the Ender-7
#define BOARD_CREALITY_V24S1_301 5054 // Creality v2.4.S1_301 (STM32F103RC / STM32F103RE) v301 as found in the Ender-3 S1
#define BOARD_CREALITY_V25S1 5055 // Creality v2.5.S1 (STM32F103RE) as found in the CR-10 Smart Pro
#define BOARD_TRIGORILLA_PRO 5056 // Trigorilla Pro (STM32F103ZE)
#define BOARD_FLY_MINI 5057 // FLYmaker FLY MINI (STM32F103RC)
#define BOARD_FLSUN_HISPEED 5058 // FLSUN HiSpeedV1 (STM32F103VE)
#define BOARD_BEAST 5059 // STM32F103RE Libmaple-based controller
#define BOARD_MINGDA_MPX_ARM_MINI 5060 // STM32F103ZE Mingda MD-16
#define BOARD_GTM32_PRO_VD 5061 // STM32F103VE controller
#define BOARD_ZONESTAR_ZM3E2 5062 // Zonestar ZM3E2 (STM32F103RC)
#define BOARD_ZONESTAR_ZM3E4 5063 // Zonestar ZM3E4 V1 (STM32F103VC)
#define BOARD_ZONESTAR_ZM3E4V2 5064 // Zonestar ZM3E4 V2 (STM32F103VC)
#define BOARD_ERYONE_ERY32_MINI 5065 // Eryone Ery32 mini (STM32F103VE)
#define BOARD_PANDA_PI_V29 5066 // Panda Pi V2.9 - Standalone (STM32F103RC)
//
// ARM Cortex-M4F
//
#define BOARD_TEENSY31_32 4100 // Teensy3.1 and Teensy3.2
#define BOARD_TEENSY35_36 4101 // Teensy3.5 and Teensy3.6
#define BOARD_TEENSY31_32 5100 // Teensy3.1 and Teensy3.2
#define BOARD_TEENSY35_36 5101 // Teensy3.5 and Teensy3.6
//
// STM32 ARM Cortex-M4F
//
#define BOARD_ARMED 4200 // Arm'ed STM32F4-based controller
#define BOARD_RUMBA32_V1_0 4201 // RUMBA32 STM32F446VE based controller from Aus3D
#define BOARD_RUMBA32_V1_1 4202 // RUMBA32 STM32F446VE based controller from Aus3D
#define BOARD_RUMBA32_MKS 4203 // RUMBA32 STM32F446VE based controller from Makerbase
#define BOARD_RUMBA32_BTT 4204 // RUMBA32 STM32F446VE based controller from BIGTREETECH
#define BOARD_BLACK_STM32F407VE 4205 // BLACK_STM32F407VE
#define BOARD_BLACK_STM32F407ZE 4206 // BLACK_STM32F407ZE
#define BOARD_BTT_SKR_PRO_V1_1 4207 // BigTreeTech SKR Pro v1.1 (STM32F407ZG)
#define BOARD_BTT_SKR_PRO_V1_2 4208 // BigTreeTech SKR Pro v1.2 (STM32F407ZG)
#define BOARD_BTT_BTT002_V1_0 4209 // BigTreeTech BTT002 v1.0 (STM32F407VG)
#define BOARD_BTT_E3_RRF 4210 // BigTreeTech E3 RRF (STM32F407VG)
#define BOARD_BTT_SKR_V2_0_REV_A 4211 // BigTreeTech SKR v2.0 Rev A (STM32F407VG)
#define BOARD_BTT_SKR_V2_0_REV_B 4212 // BigTreeTech SKR v2.0 Rev B (STM32F407VG/STM32F429VG)
#define BOARD_BTT_GTR_V1_0 4213 // BigTreeTech GTR v1.0 (STM32F407IGT)
#define BOARD_BTT_OCTOPUS_V1_0 4214 // BigTreeTech Octopus v1.0 (STM32F446ZE)
#define BOARD_BTT_OCTOPUS_V1_1 4215 // BigTreeTech Octopus v1.1 (STM32F446ZE)
#define BOARD_BTT_OCTOPUS_PRO_V1_0 4216 // BigTreeTech Octopus Pro v1.0 (STM32F446ZE / STM32F429ZG)
#define BOARD_LERDGE_K 4217 // Lerdge K (STM32F407ZG)
#define BOARD_LERDGE_S 4218 // Lerdge S (STM32F407VE)
#define BOARD_LERDGE_X 4219 // Lerdge X (STM32F407VE)
#define BOARD_VAKE403D 4220 // VAkE 403D (STM32F446VE)
#define BOARD_FYSETC_S6 4221 // FYSETC S6 (STM32F446VE)
#define BOARD_FYSETC_S6_V2_0 4222 // FYSETC S6 v2.0 (STM32F446VE)
#define BOARD_FYSETC_SPIDER 4223 // FYSETC Spider (STM32F446VE)
#define BOARD_FLYF407ZG 4224 // FLYmaker FLYF407ZG (STM32F407ZG)
#define BOARD_MKS_ROBIN2 4225 // MKS_ROBIN2 (STM32F407ZE)
#define BOARD_MKS_ROBIN_PRO_V2 4226 // MKS Robin Pro V2 (STM32F407VE)
#define BOARD_MKS_ROBIN_NANO_V3 4227 // MKS Robin Nano V3 (STM32F407VG)
#define BOARD_MKS_ROBIN_NANO_V3_1 4228 // MKS Robin Nano V3.1 (STM32F407VE)
#define BOARD_MKS_MONSTER8_V1 4229 // MKS Monster8 V1 (STM32F407VE)
#define BOARD_MKS_MONSTER8_V2 4230 // MKS Monster8 V2 (STM32F407VE)
#define BOARD_ANET_ET4 4231 // ANET ET4 V1.x (STM32F407VG)
#define BOARD_ANET_ET4P 4232 // ANET ET4P V1.x (STM32F407VG)
#define BOARD_FYSETC_CHEETAH_V20 4233 // FYSETC Cheetah V2.0 (STM32F401RC)
#define BOARD_TH3D_EZBOARD_V2 4234 // TH3D EZBoard v2.0 (STM32F405RG)
#define BOARD_OPULO_LUMEN_REV3 4235 // Opulo Lumen PnP Controller REV3 (STM32F407VE / STM32F407VG)
#define BOARD_MKS_ROBIN_NANO_V1_3_F4 4236 // MKS Robin Nano V1.3 and MKS Robin Nano-S V1.3 (STM32F407VE)
#define BOARD_MKS_EAGLE 4237 // MKS Eagle (STM32F407VE)
#define BOARD_ARTILLERY_RUBY 4238 // Artillery Ruby (STM32F401RC)
#define BOARD_FYSETC_SPIDER_V2_2 4239 // FYSETC Spider V2.2 (STM32F446VE)
#define BOARD_CREALITY_V24S1_301F4 4240 // Creality v2.4.S1_301F4 (STM32F401RC) as found in the Ender-3 S1 F4
#define BOARD_OPULO_LUMEN_REV4 4241 // Opulo Lumen PnP Controller REV4 (STM32F407VE / STM32F407VG)
#define BOARD_FYSETC_SPIDER_KING407 4242 // FYSETC Spider King407 (STM32F407ZG)
#define BOARD_MKS_SKIPR_V1 4243 // MKS SKIPR v1.0 all-in-one board (STM32F407VE)
#define BOARD_TRONXY_V10 4244 // TRONXY V10 (STM32F446ZE)
#define BOARD_ARMED 5200 // Arm'ed STM32F4-based controller
#define BOARD_RUMBA32_V1_0 5201 // RUMBA32 STM32F446VE based controller from Aus3D
#define BOARD_RUMBA32_V1_1 5202 // RUMBA32 STM32F446VE based controller from Aus3D
#define BOARD_RUMBA32_MKS 5203 // RUMBA32 STM32F446VE based controller from Makerbase
#define BOARD_RUMBA32_BTT 5204 // RUMBA32 STM32F446VE based controller from BIGTREETECH
#define BOARD_BLACK_STM32F407VE 5205 // BLACK_STM32F407VE
#define BOARD_BLACK_STM32F407ZE 5206 // BLACK_STM32F407ZE
#define BOARD_BTT_SKR_MINI_E3_V3_0_1 5207 // BigTreeTech SKR Mini E3 V3.0.1 (STM32F401RC)
#define BOARD_BTT_SKR_PRO_V1_1 5208 // BigTreeTech SKR Pro v1.1 (STM32F407ZG)
#define BOARD_BTT_SKR_PRO_V1_2 5209 // BigTreeTech SKR Pro v1.2 (STM32F407ZG)
#define BOARD_BTT_BTT002_V1_0 5210 // BigTreeTech BTT002 v1.0 (STM32F407VG)
#define BOARD_BTT_E3_RRF 5211 // BigTreeTech E3 RRF (STM32F407VG)
#define BOARD_BTT_SKR_V2_0_REV_A 5212 // BigTreeTech SKR v2.0 Rev A (STM32F407VG)
#define BOARD_BTT_SKR_V2_0_REV_B 5213 // BigTreeTech SKR v2.0 Rev B (STM32F407VG/STM32F429VG)
#define BOARD_BTT_GTR_V1_0 5214 // BigTreeTech GTR v1.0 (STM32F407IGT)
#define BOARD_BTT_OCTOPUS_V1_0 5215 // BigTreeTech Octopus v1.0 (STM32F446ZE)
#define BOARD_BTT_OCTOPUS_V1_1 5216 // BigTreeTech Octopus v1.1 (STM32F446ZE)
#define BOARD_BTT_OCTOPUS_PRO_V1_0 5217 // BigTreeTech Octopus Pro v1.0 (STM32F446ZE / STM32F429ZG)
#define BOARD_LERDGE_K 5218 // Lerdge K (STM32F407ZG)
#define BOARD_LERDGE_S 5219 // Lerdge S (STM32F407VE)
#define BOARD_LERDGE_X 5220 // Lerdge X (STM32F407VE)
#define BOARD_VAKE403D 5221 // VAkE 403D (STM32F446VE)
#define BOARD_FYSETC_S6 5222 // FYSETC S6 (STM32F446VE)
#define BOARD_FYSETC_S6_V2_0 5223 // FYSETC S6 v2.0 (STM32F446VE)
#define BOARD_FYSETC_SPIDER 5224 // FYSETC Spider (STM32F446VE)
#define BOARD_FLYF407ZG 5225 // FLYmaker FLYF407ZG (STM32F407ZG)
#define BOARD_MKS_ROBIN2 5226 // MKS_ROBIN2 (STM32F407ZE)
#define BOARD_MKS_ROBIN_PRO_V2 5227 // MKS Robin Pro V2 (STM32F407VE)
#define BOARD_MKS_ROBIN_NANO_V3 5228 // MKS Robin Nano V3 (STM32F407VG)
#define BOARD_MKS_ROBIN_NANO_V3_1 5229 // MKS Robin Nano V3.1 (STM32F407VE)
#define BOARD_MKS_MONSTER8_V1 5230 // MKS Monster8 V1 (STM32F407VE)
#define BOARD_MKS_MONSTER8_V2 5231 // MKS Monster8 V2 (STM32F407VE)
#define BOARD_ANET_ET4 5232 // ANET ET4 V1.x (STM32F407VG)
#define BOARD_ANET_ET4P 5233 // ANET ET4P V1.x (STM32F407VG)
#define BOARD_FYSETC_CHEETAH_V20 5234 // FYSETC Cheetah V2.0 (STM32F401RC)
#define BOARD_TH3D_EZBOARD_V2 5235 // TH3D EZBoard v2.0 (STM32F405RG)
#define BOARD_OPULO_LUMEN_REV3 5236 // Opulo Lumen PnP Controller REV3 (STM32F407VE / STM32F407VG)
#define BOARD_MKS_ROBIN_NANO_V1_3_F4 5237 // MKS Robin Nano V1.3 and MKS Robin Nano-S V1.3 (STM32F407VE)
#define BOARD_MKS_EAGLE 5238 // MKS Eagle (STM32F407VE)
#define BOARD_ARTILLERY_RUBY 5239 // Artillery Ruby (STM32F401RC)
#define BOARD_FYSETC_SPIDER_V2_2 5240 // FYSETC Spider V2.2 (STM32F446VE)
#define BOARD_CREALITY_V24S1_301F4 5241 // Creality v2.4.S1_301F4 (STM32F401RC) as found in the Ender-3 S1 F4
#define BOARD_OPULO_LUMEN_REV4 5242 // Opulo Lumen PnP Controller REV4 (STM32F407VE / STM32F407VG)
#define BOARD_FYSETC_SPIDER_KING407 5243 // FYSETC Spider King407 (STM32F407ZG)
#define BOARD_MKS_SKIPR_V1 5244 // MKS SKIPR v1.0 all-in-one board (STM32F407VE)
#define BOARD_TRONXY_V10 5245 // TRONXY V10 (STM32F446ZE)
//
// ARM Cortex M7
// ARM Cortex-M7
//
#define BOARD_REMRAM_V1 5000 // RemRam v1
#define BOARD_TEENSY41 5001 // Teensy 4.1
#define BOARD_T41U5XBB 5002 // T41U5XBB Teensy 4.1 breakout board
#define BOARD_NUCLEO_F767ZI 5003 // ST NUCLEO-F767ZI Dev Board
#define BOARD_BTT_SKR_SE_BX_V2 5004 // BigTreeTech SKR SE BX V2.0 (STM32H743II)
#define BOARD_BTT_SKR_SE_BX_V3 5005 // BigTreeTech SKR SE BX V3.0 (STM32H743II)
#define BOARD_BTT_SKR_V3_0 5006 // BigTreeTech SKR V3.0 (STM32H743VG)
#define BOARD_BTT_SKR_V3_0_EZ 5007 // BigTreeTech SKR V3.0 EZ (STM32H743VG)
#define BOARD_REMRAM_V1 6000 // RemRam v1
#define BOARD_TEENSY41 6001 // Teensy 4.1
#define BOARD_T41U5XBB 6002 // T41U5XBB Teensy 4.1 breakout board
#define BOARD_NUCLEO_F767ZI 6003 // ST NUCLEO-F767ZI Dev Board
#define BOARD_BTT_SKR_SE_BX_V2 6004 // BigTreeTech SKR SE BX V2.0 (STM32H743II)
#define BOARD_BTT_SKR_SE_BX_V3 6005 // BigTreeTech SKR SE BX V3.0 (STM32H743II)
#define BOARD_BTT_SKR_V3_0 6006 // BigTreeTech SKR V3.0 (STM32H743VG)
#define BOARD_BTT_SKR_V3_0_EZ 6007 // BigTreeTech SKR V3.0 EZ (STM32H743VG)
//
// Espressif ESP32 WiFi
//
#define BOARD_ESPRESSIF_ESP32 6000 // Generic ESP32
#define BOARD_MRR_ESPA 6001 // MRR ESPA based on ESP32 (native pins only)
#define BOARD_MRR_ESPE 6002 // MRR ESPE based on ESP32 (with I2S stepper stream)
#define BOARD_E4D_BOX 6003 // E4d@BOX
#define BOARD_RESP32_CUSTOM 6004 // Rutilea ESP32 custom board
#define BOARD_FYSETC_E4 6005 // FYSETC E4
#define BOARD_PANDA_ZHU 6006 // Panda_ZHU
#define BOARD_PANDA_M4 6007 // Panda_M4
#define BOARD_MKS_TINYBEE 6008 // MKS TinyBee based on ESP32 (with I2S stepper stream)
#define BOARD_ENWI_ESPNP 6009 // enwi ESPNP based on ESP32 (with I2S stepper stream)
#define BOARD_ESPRESSIF_ESP32 7000 // Generic ESP32
#define BOARD_MRR_ESPA 7001 // MRR ESPA based on ESP32 (native pins only)
#define BOARD_MRR_ESPE 7002 // MRR ESPE based on ESP32 (with I2S stepper stream)
#define BOARD_E4D_BOX 7003 // E4d@BOX
#define BOARD_RESP32_CUSTOM 7004 // Rutilea ESP32 custom board
#define BOARD_FYSETC_E4 7005 // FYSETC E4
#define BOARD_PANDA_ZHU 7006 // Panda_ZHU
#define BOARD_PANDA_M4 7007 // Panda_M4
#define BOARD_MKS_TINYBEE 7008 // MKS TinyBee based on ESP32 (with I2S stepper stream)
#define BOARD_ENWI_ESPNP 7009 // enwi ESPNP based on ESP32 (with I2S stepper stream)
//
// SAMD51 ARM Cortex M4
// SAMD51 ARM Cortex-M4
//
#define BOARD_AGCM4_RAMPS_144 6100 // RAMPS 1.4.4
#define BOARD_BRICOLEMON_V1_0 6101 // Bricolemon
#define BOARD_BRICOLEMON_LITE_V1_0 6102 // Bricolemon Lite
#define BOARD_AGCM4_RAMPS_144 7100 // RAMPS 1.4.4
#define BOARD_BRICOLEMON_V1_0 7101 // Bricolemon
#define BOARD_BRICOLEMON_LITE_V1_0 7102 // Bricolemon Lite
//
// SAMD21 ARM Cortex M4
// SAMD21 ARM Cortex-M4
//
#define BOARD_MINITRONICS20 6103 // Minitronics v2.0
#define BOARD_MINITRONICS20 7103 // Minitronics v2.0
//
// Custom board

10
Marlin/src/pins/pins.h
View File

@@ -545,6 +545,16 @@
#include "stm32f1/pins_BTT_SKR_MINI_E3_V2_0.h" // STM32F1 env:STM32F103RC_btt env:STM32F103RC_btt_USB env:STM32F103RE_btt env:STM32F103RE_btt_USB env:STM32F103RC_btt_maple env:STM32F103RC_btt_USB_maple env:STM32F103RE_btt_maple env:STM32F103RE_btt_USB_maple
#elif MB(BTT_SKR_MINI_E3_V3_0)
#include "stm32g0/pins_BTT_SKR_MINI_E3_V3_0.h" // STM32G0 env:STM32G0B1RE_btt env:STM32G0B1RE_btt_xfer
#elif MB(BTT_MANTA_M4P_V1_0)
#include "stm32g0/pins_BTT_MANTA_M4P_V1_0.h" // STM32G0 env:STM32G0B1RE_btt env:STM32G0B1RE_btt_xfer
#elif MB(BTT_MANTA_M5P_V1_0)
#include "stm32g0/pins_BTT_MANTA_M5P_V1_0.h" // STM32G0 env:STM32G0B1RE_btt env:STM32G0B1RE_btt_xfer
#elif MB(BTT_MANTA_E3_EZ_V1_0)
#include "stm32g0/pins_BTT_MANTA_E3_EZ_V1_0.h" // STM32G0 env:STM32G0B1RE_btt env:STM32G0B1RE_btt_xfer
#elif MB(BTT_MANTA_M8P_V1_0)
#include "stm32g0/pins_BTT_MANTA_M8P_V1_0.h" // STM32G0 env:STM32G0B1VE_btt env:STM32G0B1VE_btt_xfer
#elif MB(BTT_MANTA_M8P_V1_1)
#include "stm32g0/pins_BTT_MANTA_M8P_V1_1.h" // STM32G0 env:STM32G0B1VE_btt env:STM32G0B1VE_btt_xfer
#elif MB(BTT_SKR_MINI_E3_V3_0_1)
#include "stm32f4/pins_BTT_SKR_MINI_E3_V3_0_1.h"// STM32F4 env:STM32F401RC_btt
#elif MB(BTT_SKR_MINI_MZ_V1_0)

26
Marlin/src/pins/stm32g0/env_validate.h Normal file
View File

@@ -0,0 +1,26 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2023 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
#if NOT_TARGET(STM32G0xx) || NOT_TARGET(STM32G0B1xx)
#error "Oops! Select an STM32G0 board in 'Tools > Board.'"
#endif

2
Marlin/src/pins/stm32g0/pins_BTT_EBB42_V1_1.h
View File

@@ -21,6 +21,8 @@
*/
#pragma once
#include "env_validate.h"
/** CAUTION **
* This board definition is to facilitate support for a Filament Extrusion
* devices, used to convert waste plastic into 3D printable filament.

340
Marlin/src/pins/stm32g0/pins_BTT_MANTA_E3_EZ_V1_0.h Normal file
View File

@@ -0,0 +1,340 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2023 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
#include "env_validate.h"
#ifndef BOARD_INFO_NAME
#define BOARD_INFO_NAME "BTT Manta E3 EZ V1.0"
#endif
#define USES_DIAG_JUMPERS
// Ignore temp readings during development.
//#define BOGUS_TEMPERATURE_GRACE_PERIOD 2000
//
// EEPROM
//
#if EITHER(NO_EEPROM_SELECTED, FLASH_EEPROM_EMULATION)
#undef NO_EEPROM_SELECTED
#ifndef FLASH_EEPROM_EMULATION
#define FLASH_EEPROM_EMULATION
#endif
#define EEPROM_PAGE_SIZE (0x800UL) // 2K
#define EEPROM_START_ADDRESS (0x8000000UL + (STM32_FLASH_SIZE) * 1024UL - (EEPROM_PAGE_SIZE) * 2UL)
#define MARLIN_EEPROM_SIZE EEPROM_PAGE_SIZE
#endif
//
// Servos
//
#define SERVO0_PIN PA7 // BLTouch
//
// Probe enable
//
#if ENABLED(PROBE_ENABLE_DISABLE)
#ifndef PROBE_ENABLE_PIN
#define PROBE_ENABLE_PIN SERVO0_PIN
#endif
#endif
//
// Trinamic StallGuard pins
//
#define X_DIAG_PIN PC4 // X-STOP
#define Y_DIAG_PIN PB0 // Y-STOP
#define Z_DIAG_PIN PC6 // Z-STOP
#define E0_DIAG_PIN PC5 // E0-DET
#define E1_DIAG_PIN PB1 // E1-DET
//
// Limit Switches
//
#define X_STOP_PIN X_DIAG_PIN // X-STOP
#define Y_STOP_PIN Y_DIAG_PIN // Y-STOP
#define Z_STOP_PIN Z_DIAG_PIN // Z-STOP
//
// Z Probe (when not Z_STOP_PIN)
//
#define Z_MIN_PROBE_PIN PA6 // BLTouch
//
// Filament Runout Sensor
//
#ifndef FIL_RUNOUT_PIN
#define FIL_RUNOUT_PIN E0_DIAG_PIN // E0-DET
#endif
#ifndef FIL_RUNOUT2_PIN
#define FIL_RUNOUT2_PIN E1_DIAG_PIN // E1-DET
#endif
//
// Power Supply Control
//
#ifndef PS_ON_PIN
#define PS_ON_PIN PA9 // PS-ON
#endif
//
// Power Loss Detection
//
#ifndef POWER_LOSS_PIN
#define POWER_LOSS_PIN PB9 // PWRDET
#endif
//
// Steppers
//
#define X_STEP_PIN PA14
#define X_DIR_PIN PA10
#define X_ENABLE_PIN PA13
#ifndef X_CS_PIN
#define X_CS_PIN PB8
#endif
#define Y_STEP_PIN PC8
#define Y_DIR_PIN PA15
#define Y_ENABLE_PIN PC14
#ifndef Y_CS_PIN
#define Y_CS_PIN PC9
#endif
#define Z_STEP_PIN PD2
#define Z_DIR_PIN PD4
#define Z_ENABLE_PIN PD3
#ifndef Z_CS_PIN
#define Z_CS_PIN PD0
#endif
#define E0_STEP_PIN PD5
#define E0_DIR_PIN PD6
#define E0_ENABLE_PIN PB3
#ifndef E0_CS_PIN
#define E0_CS_PIN PD1
#endif
#define E1_STEP_PIN PB7
#define E1_DIR_PIN PB6
#define E1_ENABLE_PIN PB4
#ifndef E1_CS_PIN
#define E1_CS_PIN PB5
#endif
//
// Software SPI pins for TMC2130 stepper drivers
//
#if ENABLED(TMC_USE_SW_SPI)
#ifndef TMC_SW_MOSI
#define TMC_SW_MOSI PC12 // Shared with SPI header, Pin 5 (SPI3)
#endif
#ifndef TMC_SW_MISO
#define TMC_SW_MISO PC11 // Shared with SPI header, Pin 6 (SPI3)
#endif
#ifndef TMC_SW_SCK
#define TMC_SW_SCK PC10 // Shared with SPI header, Pin 4 (SPI3)
#endif
#endif
#if HAS_TMC_UART
#define X_SERIAL_TX_PIN PB8 // X_CS_PIN
#define X_SERIAL_RX_PIN X_SERIAL_TX_PIN
#define Y_SERIAL_TX_PIN PC9 // Y_CS_PIN
#define Y_SERIAL_RX_PIN Y_SERIAL_TX_PIN
#define Z_SERIAL_TX_PIN PD0 // Z_CS_PIN
#define Z_SERIAL_RX_PIN Z_SERIAL_TX_PIN
#define E0_SERIAL_TX_PIN PD1 // E0_CS_PIN
#define E0_SERIAL_RX_PIN E0_SERIAL_TX_PIN
#define E1_SERIAL_TX_PIN PB5 // E1_CS_PIN
#define E1_SERIAL_RX_PIN E1_SERIAL_TX_PIN
// Reduce baud rate to improve software serial reliability
#define TMC_BAUD_RATE 19200
#endif
//
// Temperature Sensors
//
#define TEMP_0_PIN PA4 // Analog Input "TH0"
#define TEMP_1_PIN PA5 // Analog Input "TH1"
#define TEMP_BED_PIN PA3 // Analog Input "TB"
//
// Heaters / Fans
//
#define HEATER_0_PIN PB11 // "HE0"
#define HEATER_1_PIN PB10 // "HE1"
#define HEATER_BED_PIN PB2 // "HB"
#define FAN_PIN PA8 // "FAN0"
#define FAN1_PIN PB15 // "FAN1"
#define FAN2_PIN PB14 // "FAN2"
//
// Auto fans
//
#if HOTENDS == 2
#ifndef E0_AUTO_FAN_PIN
#define E0_AUTO_FAN_PIN FAN1_PIN
#endif
#ifndef E1_AUTO_FAN_PIN
#define E1_AUTO_FAN_PIN FAN2_PIN
#endif
#else
#ifndef E0_AUTO_FAN_PIN
#define E0_AUTO_FAN_PIN FAN1_PIN
#endif
#ifndef CONTROLLER_FAN_PIN
#define CONTROLLER_FAN_PIN FAN2_PIN
#endif
#endif
/**
* Manta E3 EZ V1.0
* ------
* (BEEPER) PC1 | 1 2 | PC2 (BTN_ENC)
* (BTN_EN1) PC3 | 3 4 | RESET
* (BTN_EN2) PC0 5 6 | PA0 (LCD_D4)
* (LCD_RS) PA2 | 7 8 | PA1 (LCD_EN)
* GND | 9 10 | 5V
* ------
* EXP1
*/
#define EXP1_01_PIN PC1
#define EXP1_02_PIN PC2
#define EXP1_03_PIN PC3
#define EXP1_04_PIN -1
#define EXP1_05_PIN PC0
#define EXP1_06_PIN PA0
#define EXP1_07_PIN PA2
#define EXP1_08_PIN PA1
#define EXP1_09_PIN -1
#define EXP1_10_PIN -1
#if HAS_DWIN_E3V2 || IS_DWIN_MARLINUI
#ifndef NO_CONTROLLER_CUSTOM_WIRING_WARNING
#error "CAUTION! Ender-3 V2 display requires a custom cable with TX = PA0, RX = PC2. See 'pins_BTT_MANTA_E3_EZ_V1_0.h' for details. (Define NO_CONTROLLER_CUSTOM_WIRING_WARNING to suppress this warning.)"
#endif
/**
* Ender-3 V2 display Manta E3 EZ V1.0 Ender-3 V2 display --> Manta E3 EZ V1.0
* ------ ------ RX 3 --> 5 P0_15
* -- | 1 2 | -- (BEEPER) PC1 | 1 2 | PC2 (BTN_ENC) TX 4 --> 9 P0_16
* (MANTA TX1) RX | 3 4 | TX (MANTA RX1) (BTN_EN1) PC3 | 3 4 | RESET BEEPER 6 --> 10 P2_08
* (BTN_ENC) ENT 5 6 | BEEPER (BTN_EN2) PC0 5 6 | PA0 (LCD_D4)
* (BTN_E2) B | 7 8 | A (BTN_E1) (LCD_RS) PA2 | 7 8 | PA1 (LCD_EN)
* GND | 9 10 | 5V GND | 9 10 | 5V
* ------ ------
*/
#define BEEPER_PIN EXP1_01_PIN
#define BTN_EN1 EXP1_08_PIN
#define BTN_EN2 EXP1_07_PIN
#define BTN_ENC EXP1_05_PIN
#elif HAS_WIRED_LCD
#if ENABLED(CR10_STOCKDISPLAY)
#define BEEPER_PIN EXP1_01_PIN
#define BTN_EN1 EXP1_03_PIN
#define BTN_EN2 EXP1_05_PIN
#define BTN_ENC EXP1_02_PIN
#define LCD_PINS_RS EXP1_07_PIN
#define LCD_PINS_ENABLE EXP1_08_PIN
#define LCD_PINS_D4 EXP1_06_PIN
#elif ENABLED(ZONESTAR_LCD) // ANET A8 LCD Controller - Must convert to 3.3V - CONNECTING TO 5V WILL DAMAGE THE BOARD!
#ifndef NO_CONTROLLER_CUSTOM_WIRING_WARNING
#error "CAUTION! ZONESTAR_LCD requires wiring modifications. See 'pins_BTT_MANTA_E3_EZ_V1_0.h' for details. (Define NO_CONTROLLER_CUSTOM_WIRING_WARNING to suppress this warning.)"
#endif
#define LCD_PINS_RS EXP1_06_PIN
#define LCD_PINS_ENABLE EXP1_02_PIN
#define LCD_PINS_D4 EXP1_07_PIN
#define LCD_PINS_D5 EXP1_05_PIN
#define LCD_PINS_D6 EXP1_03_PIN
#define LCD_PINS_D7 EXP1_01_PIN
#define ADC_KEYPAD_PIN PA7 // Repurpose default SERVO0_PIN for ADC - CONNECTING TO 5V WILL DAMAGE THE BOARD!
#elif EITHER(MKS_MINI_12864, ENDER2_STOCKDISPLAY)
#define BTN_EN1 EXP1_03_PIN
#define BTN_EN2 EXP1_05_PIN
#define BTN_ENC EXP1_02_PIN
#define DOGLCD_CS EXP1_07_PIN
#define DOGLCD_A0 EXP1_06_PIN
#define DOGLCD_SCK EXP1_01_PIN
#define DOGLCD_MOSI EXP1_08_PIN
#define FORCE_SOFT_SPI
#define LCD_BACKLIGHT_PIN -1
#else
#error "Only ZONESTAR_LCD, MKS_MINI_12864, ENDER2_STOCKDISPLAY, and CR10_STOCKDISPLAY are currently supported on the BTT_MANTA_E3_EZ_V1_0."
#endif
#endif // HAS_WIRED_LCD
//
// SD Support
//
#ifndef SDCARD_CONNECTION
#define SDCARD_CONNECTION ONBOARD
#endif
#define SD_DETECT_PIN -1
#if SD_CONNECTION_IS(LCD) && (BOTH(TOUCH_UI_FTDI_EVE, LCD_FYSETC_TFT81050) || IS_TFTGLCD_PANEL)
#define SD_SS_PIN EXP1_05_PIN
#elif SD_CONNECTION_IS(CUSTOM_CABLE)
#error "SD CUSTOM_CABLE is not compatible with Manta E3 EZ."
#endif
#define ONBOARD_SPI_DEVICE 3 // SPI3 -> used only by HAL/STM32F1...
#define ONBOARD_SD_CS_PIN PC13 // Chip select for "System" SD card
#define ENABLE_SPI3
#define SDSS ONBOARD_SD_CS_PIN
#define SD_SS_PIN ONBOARD_SD_CS_PIN
#define SD_SCK_PIN PC10
#define SD_MISO_PIN PC11
#define SD_MOSI_PIN PC12
//
// NeoPixel LED
//
#ifndef NEOPIXEL_PIN
#define NEOPIXEL_PIN PC7 // RGB
#endif

313
Marlin/src/pins/stm32g0/pins_BTT_MANTA_M4P_V1_0.h Normal file
View File

@@ -0,0 +1,313 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2023 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
#include "env_validate.h"
//#define BOARD_CUSTOM_BUILD_FLAGS -DTONE_CHANNEL=4 -DTONE_TIMER=4 -DTIMER_TONE=4
#ifndef BOARD_INFO_NAME
#define BOARD_INFO_NAME "BTT Manta M4P V1.0"
#endif
#define USES_DIAG_JUMPERS
// Ignore temp readings during development.
//#define BOGUS_TEMPERATURE_GRACE_PERIOD 2000
//
// EEPROM
//
#if EITHER(NO_EEPROM_SELECTED, FLASH_EEPROM_EMULATION)
#undef NO_EEPROM_SELECTED
#ifndef FLASH_EEPROM_EMULATION
#define FLASH_EEPROM_EMULATION
#endif
#define EEPROM_PAGE_SIZE (0x800UL) // 2K
#define EEPROM_START_ADDRESS (0x8000000UL + (STM32_FLASH_SIZE) * 1024UL - (EEPROM_PAGE_SIZE) * 2UL)
#define MARLIN_EEPROM_SIZE EEPROM_PAGE_SIZE
#endif
//
// Servos
//
#define SERVO0_PIN PA1 // SERVOS
//
// Probe enable
//
#if ENABLED(PROBE_ENABLE_DISABLE)
#ifndef PROBE_ENABLE_PIN
#define PROBE_ENABLE_PIN SERVO0_PIN
#endif
#endif
//
// Limit Switches
//
#define X_STOP_PIN PC0 // X-STOP
#define Y_STOP_PIN PC1 // Y-STOP
#define Z_STOP_PIN PC2 // Z-STOP
//
// Z Probe must be this pin
//
#define Z_MIN_PROBE_PIN PC14 // PROBE
//
// Filament Runout Sensor
//
#ifndef FIL_RUNOUT_PIN
#define FIL_RUNOUT_PIN PC15 // E0-STOP
#endif
//
// Steppers
//
#define X_STEP_PIN PC6
#define X_DIR_PIN PA14
#define X_ENABLE_PIN PC7
#ifndef X_CS_PIN
#define X_CS_PIN PB12
#endif
#define Y_STEP_PIN PB10
#define Y_DIR_PIN PB2
#define Y_ENABLE_PIN PB11
#ifndef Y_CS_PIN
#define Y_CS_PIN PC10
#endif
#define Z_STEP_PIN PB0
#define Z_DIR_PIN PC5
#define Z_ENABLE_PIN PB1
#ifndef Z_CS_PIN
#define Z_CS_PIN PC9
#endif
#define E0_STEP_PIN PB3
#define E0_DIR_PIN PB4
#define E0_ENABLE_PIN PD5
#ifndef E0_CS_PIN
#define E0_CS_PIN PA13
#endif
//
// Software SPI pins for TMC2130 stepper drivers
//
#if ENABLED(TMC_USE_SW_SPI)
#ifndef TMC_SW_MOSI
#define TMC_SW_MOSI PB15
#endif
#ifndef TMC_SW_MISO
#define TMC_SW_MISO PB14
#endif
#ifndef TMC_SW_SCK
#define TMC_SW_SCK PB13
#endif
#endif
#if HAS_TMC_UART
#define X_SERIAL_TX_PIN PB12
#define X_SERIAL_RX_PIN X_SERIAL_TX_PIN
#define Y_SERIAL_TX_PIN PC10
#define Y_SERIAL_RX_PIN Y_SERIAL_TX_PIN
#define Z_SERIAL_TX_PIN PC9
#define Z_SERIAL_RX_PIN Z_SERIAL_TX_PIN
#define E0_SERIAL_TX_PIN PA13
#define E0_SERIAL_RX_PIN E0_SERIAL_TX_PIN
// Reduce baud rate to improve software serial reliability
#define TMC_BAUD_RATE 19200
#endif
//
// Temperature Sensors
//
#define TEMP_0_PIN PA0 // Analog Input "TH0"
#define TEMP_BED_PIN PC4 // Analog Input "TB0"
//
// Heaters / Fans
//
#define HEATER_0_PIN PC8 // "HE"
#define HEATER_BED_PIN PD8 // "HB"
#define FAN_PIN PD2 // "FAN0"
#define FAN1_PIN PD3 // "FAN1"
#define FAN2_PIN PD4 // "FAN2"
/**
* ------ ------
* (BEEPER) PD6 | 1 2 | PB8 (BTN_ENC) (MISO) PB14 | 1 2 | PB13 (SCK)
* (LCD_EN) PB9 | 3 4 | PC3 (LCD_RS) (BTN_EN1) PC11 | 3 4 | PA8 (SD_SS)
* (LCD_D4) PA15 | 5 6 PA10 (LCD_D5) (BTN_EN2) PC12 | 5 6 PB15 (MOSI)
* (LCD_D6) PA9 | 7 8 | PB5 (LCD_D7) (SD_DETECT) PC13 | 7 8 | RESET
* GND | 9 10 | 5V GND | 9 10 | --
* ------ ------
* EXP1 EXP2
*/
#define EXP1_01_PIN PD6
#define EXP1_02_PIN PB8
#define EXP1_03_PIN PB9
#define EXP1_04_PIN PC3
#define EXP1_05_PIN PA15
#define EXP1_06_PIN PA10
#define EXP1_07_PIN PA9
#define EXP1_08_PIN PB5
#define EXP2_01_PIN PB14
#define EXP2_02_PIN PB13
#define EXP2_03_PIN PC11
#define EXP2_04_PIN PA8
#define EXP2_05_PIN PC12
#define EXP2_06_PIN PB15
#define EXP2_07_PIN PC13
#define EXP2_08_PIN -1
//
// Onboard SD card
// Must use soft SPI because Marlin's default hardware SPI is tied to LCD's EXP2
//
#if SD_CONNECTION_IS(LCD)
#define SDSS EXP2_04_PIN
#define SD_SS_PIN SDSS
#define SD_SCK_PIN EXP2_02_PIN
#define SD_MISO_PIN EXP2_01_PIN
#define SD_MOSI_PIN EXP2_06_PIN
#define SD_DETECT_PIN EXP2_07_PIN
#elif SD_CONNECTION_IS(ONBOARD)
#define SD_SCK_PIN PA5
#define SD_MISO_PIN PA6
#define SD_MOSI_PIN PA7
#define ONBOARD_SD_CS_PIN PA4 // Chip select for "System" SD card
#define SD_SS_PIN ONBOARD_SD_CS_PIN
#elif SD_CONNECTION_IS(CUSTOM_CABLE)
#error "No custom SD drive cable defined for this board."
#endif
//
// LCDs and Controllers
//
#if IS_TFTGLCD_PANEL
#if ENABLED(TFTGLCD_PANEL_SPI)
#define TFTGLCD_CS EXP2_03_PIN
#endif
#elif HAS_WIRED_LCD
#define BEEPER_PIN EXP1_01_PIN
#define BTN_ENC EXP1_02_PIN
#if ENABLED(CR10_STOCKDISPLAY)
#define LCD_PINS_RS EXP1_07_PIN
#define BTN_EN1 EXP1_03_PIN
#define BTN_EN2 EXP1_05_PIN
#define LCD_PINS_ENABLE EXP1_08_PIN
#define LCD_PINS_D4 EXP1_06_PIN
#elif ENABLED(MKS_MINI_12864)
#define DOGLCD_A0 EXP1_07_PIN
#define DOGLCD_CS EXP1_06_PIN
#define BTN_EN1 EXP2_03_PIN
#define BTN_EN2 EXP2_05_PIN
#else
#define LCD_PINS_RS EXP1_04_PIN
#define BTN_EN1 EXP2_03_PIN
#define BTN_EN2 EXP2_05_PIN
#define LCD_PINS_ENABLE EXP1_03_PIN
#define LCD_PINS_D4 EXP1_05_PIN
#if ENABLED(FYSETC_MINI_12864)
#define DOGLCD_CS EXP1_03_PIN
#define DOGLCD_A0 EXP1_04_PIN
//#define LCD_BACKLIGHT_PIN -1
#define FORCE_SOFT_SPI // Use this if default of hardware SPI causes display problems
// results in LCD soft SPI mode 3, SD soft SPI mode 0
#define LCD_RESET_PIN EXP1_05_PIN // Must be high or open for LCD to operate normally.
#if EITHER(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0)
#ifndef RGB_LED_R_PIN
#define RGB_LED_R_PIN EXP1_06_PIN
#endif
#ifndef RGB_LED_G_PIN
#define RGB_LED_G_PIN EXP1_07_PIN
#endif
#ifndef RGB_LED_B_PIN
#define RGB_LED_B_PIN EXP1_08_PIN
#endif
#elif ENABLED(FYSETC_MINI_12864_2_1)
#define NEOPIXEL_PIN EXP1_06_PIN
#endif
#endif // !FYSETC_MINI_12864
#if IS_ULTIPANEL
#define LCD_PINS_D5 EXP1_06_PIN
#define LCD_PINS_D6 EXP1_07_PIN
#define LCD_PINS_D7 EXP1_08_PIN
#if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
#define BTN_ENC_EN LCD_PINS_D7 // Detect the presence of the encoder
#endif
#endif
#endif
#endif // HAS_WIRED_LCD
// Alter timing for graphical display
#if IS_U8GLIB_ST7920
#ifndef BOARD_ST7920_DELAY_1
#define BOARD_ST7920_DELAY_1 120
#endif
#ifndef BOARD_ST7920_DELAY_2
#define BOARD_ST7920_DELAY_2 80
#endif
#ifndef BOARD_ST7920_DELAY_3
#define BOARD_ST7920_DELAY_3 580
#endif
#endif
//
// NeoPixel LED
//
#ifndef NEOPIXEL_PIN
#define NEOPIXEL_PIN PD0
#endif
#ifndef NEOPIXEL2_PIN
#define NEOPIXEL2_PIN PD1
#endif

341
Marlin/src/pins/stm32g0/pins_BTT_MANTA_M5P_V1_0.h Normal file
View File

@@ -0,0 +1,341 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2023 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
#include "env_validate.h"
#ifndef BOARD_INFO_NAME
#define BOARD_INFO_NAME "BTT Manta M5P V1.0"
#endif
#define USES_DIAG_JUMPERS
// Ignore temp readings during development.
//#define BOGUS_TEMPERATURE_GRACE_PERIOD 2000
//
// EEPROM
//
#if EITHER(NO_EEPROM_SELECTED, FLASH_EEPROM_EMULATION)
#undef NO_EEPROM_SELECTED
#ifndef FLASH_EEPROM_EMULATION
#define FLASH_EEPROM_EMULATION
#endif
#define EEPROM_PAGE_SIZE (0x800UL) // 2K
#define EEPROM_START_ADDRESS (0x8000000UL + (STM32_FLASH_SIZE) * 1024UL - (EEPROM_PAGE_SIZE) * 2UL)
#define MARLIN_EEPROM_SIZE EEPROM_PAGE_SIZE
#endif
//
// Servos
//
#define SERVO0_PIN PC15 // PROBE
//
// Probe enable
//
#if ENABLED(PROBE_ENABLE_DISABLE)
#ifndef PROBE_ENABLE_PIN
#define PROBE_ENABLE_PIN SERVO0_PIN
#endif
#endif
//
// Trinamic StallGuard pins
//
#define X_DIAG_PIN PD3 // MIN1
#define Y_DIAG_PIN PD2 // MIN2
#define Z_DIAG_PIN PC3 // MIN3
#define E0_DIAG_PIN PC2 // MIN4
#define E1_DIAG_PIN -1
//
// Limit Switches
//
#define X_STOP_PIN X_DIAG_PIN // MIN1
#define Y_STOP_PIN Y_DIAG_PIN // MIN1
#define Z_STOP_PIN Z_DIAG_PIN // MIN3
//
// Z Probe (when not Z_STOP_PIN)
//
#ifndef Z_MIN_PROBE_PIN
#define Z_MIN_PROBE_PIN PC13 // PROBE
//#define Z_MIN_PROBE_PIN PC15 // IND-DET (with adjustable pullup set via jumper)
#endif
//
// Filament Runout Sensor
//
#ifndef FIL_RUNOUT_PIN
#define FIL_RUNOUT_PIN E0_DIAG_PIN // MIN4
#endif
//
// Steppers
//
#define X_STEP_PIN PC8
#define X_DIR_PIN PC9
#define X_ENABLE_PIN PA15
#ifndef X_CS_PIN
#define X_CS_PIN PD9
#endif
#define Y_STEP_PIN PA10
#define Y_DIR_PIN PA14
#define Y_ENABLE_PIN PA13
#ifndef Y_CS_PIN
#define Y_CS_PIN PD8
#endif
#define Z_STEP_PIN PC6
#define Z_DIR_PIN PC7
#define Z_ENABLE_PIN PA9
#ifndef Z_CS_PIN
#define Z_CS_PIN PB10
#endif
#define E0_STEP_PIN PB12
#define E0_DIR_PIN PB11
#define E0_ENABLE_PIN PA8
#ifndef E0_CS_PIN
#define E0_CS_PIN PB2
#endif
#define E1_STEP_PIN PB0
#define E1_DIR_PIN PB1
#define E1_ENABLE_PIN PC4
#ifndef E1_CS_PIN
#define E1_CS_PIN PA6
#endif
//
// Software SPI pins for TMC2130 stepper drivers
//
#if ENABLED(TMC_USE_SW_SPI)
#ifndef TMC_SW_MOSI
#define TMC_SW_MOSI PB15 // Shared with SPI header, Pin 5 (SPI2)
#endif
#ifndef TMC_SW_MISO
#define TMC_SW_MISO PB14 // Shared with SPI header, Pin 6 (SPI2)
#endif
#ifndef TMC_SW_SCK
#define TMC_SW_SCK PB13 // Shared with SPI header, Pin 4 (SPI2)
#endif
#endif
#if HAS_TMC_UART
#define X_SERIAL_TX_PIN PD9 // X_CS_PIN
#define X_SERIAL_RX_PIN X_SERIAL_TX_PIN
#define Y_SERIAL_TX_PIN PD8 // Y_CS_PIN
#define Y_SERIAL_RX_PIN Y_SERIAL_TX_PIN
#define Z_SERIAL_TX_PIN PB10 // Z_CS_PIN
#define Z_SERIAL_RX_PIN Z_SERIAL_TX_PIN
#define E0_SERIAL_TX_PIN PB2 // E0_CS_PIN
#define E0_SERIAL_RX_PIN E0_SERIAL_TX_PIN
#define E1_SERIAL_TX_PIN PA6 // E1_CS_PIN
#define E1_SERIAL_RX_PIN E1_SERIAL_TX_PIN
// Reduce baud rate to improve software serial reliability
#define TMC_BAUD_RATE 19200
#endif
//
// Temperature Sensors
//
#define TEMP_0_PIN PA1 // Analog Input "TH0"
#define TEMP_1_PIN PA2 // Analog Input "TH1"
#define TEMP_BED_PIN PA0 // Analog Input "TB"
//
// Heaters / Fans
//
#define HEATER_0_PIN PC5 // "HE0"
#define HEATER_1_PIN PA7 // "HE1"
#define HEATER_BED_PIN PA5 // "HB"
#define FAN_PIN PA4 // "FAN0"
#define FAN1_PIN PA3 // "FAN1"
//
// Auto fans
//
#ifndef E0_AUTO_FAN_PIN
#define E0_AUTO_FAN_PIN FAN1_PIN
#endif
/**
* ------ ------
* (BEEPER) PD5 | 1 2 | PD4 (BTN_ENC) (MISO) PB14 | 1 2 | PB13 (SCK)
* (LCD_EN) PB3 | 3 4 | PD6 (LCD_RS) (BTN_EN1) PB8 | 3 4 | PB9 (SD_SS)
* (LCD_D4) PB5 | 5 6 PB4 (LCD_D5) (BTN_EN2) PC10 | 5 6 PB15 (MOSI)
* (LCD_D6) PB7 | 7 8 | PB6 (LCD_D7) (SD_DETECT) PC12 | 7 8 | PF2
* GND | 9 10 | 5V GND | 9 10 | --
* ------ ------
* EXP1 EXP2
*/
#define EXP1_01_PIN PD5
#define EXP1_02_PIN PD4
#define EXP1_03_PIN PB3
#define EXP1_04_PIN PD6
#define EXP1_05_PIN PB5
#define EXP1_06_PIN PB4
#define EXP1_07_PIN PB7
#define EXP1_08_PIN PB6
#define EXP2_01_PIN PB14
#define EXP2_02_PIN PB13
#define EXP2_03_PIN PB8
#define EXP2_04_PIN PB9
#define EXP2_05_PIN PC10
#define EXP2_06_PIN PB15
#define EXP2_07_PIN PC12
#define EXP2_08_PIN -1
//
// Onboard SD card
// Must use soft SPI because Marlin's default hardware SPI is tied to LCD's EXP2
//
#if SD_CONNECTION_IS(LCD)
#define SDSS EXP2_04_PIN
#define SD_SS_PIN SDSS
#define SD_SCK_PIN EXP2_02_PIN
#define SD_MISO_PIN EXP2_01_PIN
#define SD_MOSI_PIN EXP2_06_PIN
#define SD_DETECT_PIN EXP2_07_PIN
#elif SD_CONNECTION_IS(ONBOARD)
#define SD_SCK_PIN PB13
#define SD_MISO_PIN PB14
#define SD_MOSI_PIN PB15
#define ONBOARD_SD_CS_PIN PC1 // Chip select for "System" SD card
#define SD_SS_PIN ONBOARD_SD_CS_PIN
#elif SD_CONNECTION_IS(CUSTOM_CABLE)
#error "No custom SD drive cable defined for this board."
#endif
//
// LCDs and Controllers
//
#if IS_TFTGLCD_PANEL
#if ENABLED(TFTGLCD_PANEL_SPI)
#define TFTGLCD_CS EXP2_03_PIN
#endif
#elif HAS_WIRED_LCD
#define BEEPER_PIN EXP1_01_PIN
#define BTN_ENC EXP1_02_PIN
#if ENABLED(CR10_STOCKDISPLAY)
#define LCD_PINS_RS EXP1_07_PIN
#define BTN_EN1 EXP1_03_PIN
#define BTN_EN2 EXP1_05_PIN
#define LCD_PINS_ENABLE EXP1_08_PIN
#define LCD_PINS_D4 EXP1_06_PIN
#elif ENABLED(MKS_MINI_12864)
#define DOGLCD_A0 EXP1_07_PIN
#define DOGLCD_CS EXP1_06_PIN
#define BTN_EN1 EXP2_03_PIN
#define BTN_EN2 EXP2_05_PIN
#else
#define LCD_PINS_RS EXP1_04_PIN
#define BTN_EN1 EXP2_03_PIN
#define BTN_EN2 EXP2_05_PIN
#define LCD_PINS_ENABLE EXP1_03_PIN
#define LCD_PINS_D4 EXP1_05_PIN
#if ENABLED(FYSETC_MINI_12864)
#define DOGLCD_CS EXP1_03_PIN
#define DOGLCD_A0 EXP1_04_PIN
//#define LCD_BACKLIGHT_PIN -1
#define FORCE_SOFT_SPI // Use this if default of hardware SPI causes display problems
// results in LCD soft SPI mode 3, SD soft SPI mode 0
#define LCD_RESET_PIN EXP1_05_PIN // Must be high or open for LCD to operate normally.
#if EITHER(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0)
#ifndef RGB_LED_R_PIN
#define RGB_LED_R_PIN EXP1_06_PIN
#endif
#ifndef RGB_LED_G_PIN
#define RGB_LED_G_PIN EXP1_07_PIN
#endif
#ifndef RGB_LED_B_PIN
#define RGB_LED_B_PIN EXP1_08_PIN
#endif
#elif ENABLED(FYSETC_MINI_12864_2_1)
#define NEOPIXEL_PIN EXP1_06_PIN
#endif
#endif // !FYSETC_MINI_12864
#if IS_ULTIPANEL
#define LCD_PINS_D5 EXP1_06_PIN
#define LCD_PINS_D6 EXP1_07_PIN
#define LCD_PINS_D7 EXP1_08_PIN
#if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
#define BTN_ENC_EN LCD_PINS_D7 // Detect the presence of the encoder
#endif
#endif
#endif
#endif // HAS_WIRED_LCD
// Alter timing for graphical display
#if IS_U8GLIB_ST7920
#ifndef BOARD_ST7920_DELAY_1
#define BOARD_ST7920_DELAY_1 120
#endif
#ifndef BOARD_ST7920_DELAY_2
#define BOARD_ST7920_DELAY_2 80
#endif
#ifndef BOARD_ST7920_DELAY_3
#define BOARD_ST7920_DELAY_3 580
#endif
#endif
//
// NeoPixel LED
//
#ifndef NEOPIXEL_PIN
#define NEOPIXEL_PIN PC11 // RGB1
#endif
#ifndef NEOPIXEL2_PIN
#define NEOPIXEL2_PIN PC14 // RGB2
#endif

79
Marlin/src/pins/stm32g0/pins_BTT_MANTA_M8P_V1_0.h Normal file
View File

@@ -0,0 +1,79 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2023 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
// Include common Manta M8P pins
#include "pins_BTT_MANTA_M8P_common.h"
#ifndef BOARD_INFO_NAME
#define BOARD_INFO_NAME "BTT Manta M8P V1.0"
#endif
//
// Steppers
//
#define E1_STEP_PIN PA10 // M6
#define E1_DIR_PIN PD15
#define E1_ENABLE_PIN PA15
#ifndef E1_CS_PIN
#define E1_CS_PIN PF8
#endif
#define E2_STEP_PIN PD12 // M7
#define E2_DIR_PIN PD11
#define E2_ENABLE_PIN PD14
#ifndef E2_CS_PIN
#define E2_CS_PIN PD13
#endif
#define E3_STEP_PIN PD10 // M8
#define E3_DIR_PIN PD8
#define E3_ENABLE_PIN PD9
#ifndef E3_CS_PIN
#define E3_CS_PIN PC7
#endif
#if HAS_TMC_UART
#define E1_SERIAL_TX_PIN PF8
#define E1_SERIAL_RX_PIN E1_SERIAL_TX_PIN
#define E2_SERIAL_TX_PIN PD13
#define E2_SERIAL_RX_PIN E2_SERIAL_TX_PIN
#define E3_SERIAL_TX_PIN PC7
#define E3_SERIAL_RX_PIN E3_SERIAL_TX_PIN
// Reduce baud rate to improve software serial reliability
#define TMC_BAUD_RATE 19200
#endif
//
// NeoPixel LED
//
#ifndef NEOPIXEL_PIN
#define NEOPIXEL_PIN PC6
#endif
#ifndef NEOPIXEL2_PIN
#define NEOPIXEL2_PIN PA9
#endif

78
Marlin/src/pins/stm32g0/pins_BTT_MANTA_M8P_V1_1.h Normal file
View File

@@ -0,0 +1,78 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2023 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
// Include common Manta M8P pins
#include "pins_BTT_MANTA_M8P_common.h"
#ifndef BOARD_INFO_NAME
#define BOARD_INFO_NAME "BTT Manta M8P V1.1"
#endif
//
// Steppers
//
#define E1_STEP_PIN PA10 // M6
#define E1_DIR_PIN PA14
#define E1_ENABLE_PIN PA15
#ifndef E1_CS_PIN
#define E1_CS_PIN PF8
#endif
#define E2_STEP_PIN PD11 // M7
#define E2_DIR_PIN PD9
#define E2_ENABLE_PIN PD15
#ifndef E2_CS_PIN
#define E2_CS_PIN PD14
#endif
#define E3_STEP_PIN PD8 // M8
#define E3_DIR_PIN PC6
#define E3_ENABLE_PIN PC7
#ifndef E3_CS_PIN
#define E3_CS_PIN PD10
#endif
#if HAS_TMC_UART
#define E1_SERIAL_TX_PIN PF8
#define E1_SERIAL_RX_PIN E1_SERIAL_TX_PIN
#define E2_SERIAL_TX_PIN PD14
#define E2_SERIAL_RX_PIN E2_SERIAL_TX_PIN
#define E3_SERIAL_TX_PIN PD10
#define E3_SERIAL_RX_PIN E3_SERIAL_TX_PIN
// Reduce baud rate to improve software serial reliability
#define TMC_BAUD_RATE 19200
#endif
//
// NeoPixel LED
//
#ifndef NEOPIXEL_PIN
#define NEOPIXEL_PIN PA9
#endif
#ifndef NEOPIXEL2_PIN
#define NEOPIXEL2_PIN PB15
#endif

397
Marlin/src/pins/stm32g0/pins_BTT_MANTA_M8P_common.h Normal file
View File

@@ -0,0 +1,397 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2023 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
#include "env_validate.h"
//#define BOARD_CUSTOM_BUILD_FLAGS -DTONE_CHANNEL=4 -DTONE_TIMER=4 -DTIMER_TONE=4
#define USES_DIAG_JUMPERS
// Ignore temp readings during development.
//#define BOGUS_TEMPERATURE_GRACE_PERIOD 2000
//
// EEPROM
//
#if EITHER(NO_EEPROM_SELECTED, FLASH_EEPROM_EMULATION)
#undef NO_EEPROM_SELECTED
#ifndef FLASH_EEPROM_EMULATION
#define FLASH_EEPROM_EMULATION
#endif
#define EEPROM_PAGE_SIZE (0x800UL) // 2K
#define EEPROM_START_ADDRESS (0x8000000UL + (STM32_FLASH_SIZE) * 1024UL - (EEPROM_PAGE_SIZE) * 2UL)
#define MARLIN_EEPROM_SIZE EEPROM_PAGE_SIZE
#endif
//
// Servos
//
#define SERVO0_PIN PB1 // PROBE
//
// Probe enable
//
#if ENABLED(PROBE_ENABLE_DISABLE)
#ifndef PROBE_ENABLE_PIN
#define PROBE_ENABLE_PIN SERVO0_PIN
#endif
#endif
//
// Trinamic Stallguard pins
//
#define X_DIAG_PIN PF3 // MIN1
#define Y_DIAG_PIN PF4 // MIN2
#define Z_DIAG_PIN PF5 // MIN3
#define Z2_DIAG_PIN PC0 // MIN4
#define E0_DIAG_PIN PC1 // MIN5
#define E1_DIAG_PIN PC2 // MIN6
//
// Z Probe (when not Z_MIN_PIN)
//
#ifndef Z_MIN_PROBE_PIN
#define Z_MIN_PROBE_PIN PB2 // PROBE
//#define Z_MIN_PROBE_PIN PF6 // IND-PROBE (with adjustable voltage & pullup set via jumpers)
#endif
//
// Check for additional used endstop pins
//
#if HAS_EXTRA_ENDSTOPS
#define _ENDSTOP_IS_ANY(ES) X2_USE_ENDSTOP == ES || Y2_USE_ENDSTOP == ES || Z2_USE_ENDSTOP == ES || Z3_USE_ENDSTOP == ES || Z4_USE_ENDSTOP == ES
#if _ENDSTOP_IS_ANY(_XMIN_) || _ENDSTOP_IS_ANY(_XMAX_)
#define NEEDS_X_MINMAX 1
#endif
#if _ENDSTOP_IS_ANY(_YMIN_) || _ENDSTOP_IS_ANY(_YMAX_)
#define NEEDS_Y_MINMAX 1
#endif
#undef _ENDSTOP_IS_ANY
#endif
//
// Limit Switches
//
#ifdef X_STALL_SENSITIVITY
#define X_STOP_PIN X_DIAG_PIN
#if X_HOME_TO_MIN
#define X_MAX_PIN E0_DIAG_PIN // MIN5
#else
#define X_MIN_PIN E0_DIAG_PIN // MIN5
#endif
#elif EITHER(DUAL_X_CARRIAGE, NEEDS_X_MINMAX)
#ifndef X_MIN_PIN
#define X_MIN_PIN X_DIAG_PIN // MIN1
#endif
#ifndef X_MAX_PIN
#define X_MAX_PIN E0_DIAG_PIN // MIN5
#endif
#else
#define X_STOP_PIN X_DIAG_PIN // MIN1
#endif
#ifdef Y_STALL_SENSITIVITY
#define Y_STOP_PIN Y_DIAG_PIN
#if Y_HOME_TO_MIN
#define Y_MAX_PIN E1_DIAG_PIN // MIN6
#else
#define Y_MIN_PIN E1_DIAG_PIN // MIN6
#endif
#elif NEEDS_Y_MINMAX
#ifndef Y_MIN_PIN
#define Y_MIN_PIN Y_DIAG_PIN // MIN2
#endif
#ifndef Y_MAX_PIN
#define Y_MAX_PIN E1_DIAG_PIN // MIN6
#endif
#else
#define Y_STOP_PIN Y_DIAG_PIN // MIN2
#endif
#define Z_STOP_PIN Z_DIAG_PIN // MIN3
#undef NEEDS_X_MINMAX
#undef NEEDS_Y_MINMAX
//
// Filament Runout Sensors
//
#define FIL_RUNOUT_PIN PC1 // MIN5
#define FIL_RUNOUT2_PIN PC2 // MIN6
#ifndef PS_ON_PIN
#define PS_ON_PIN PC3 // PS-ON
#endif
//
// Steppers
//
#define X_STEP_PIN PE2 // M1
#define X_DIR_PIN PB4
#define X_ENABLE_PIN PC11
#ifndef X_CS_PIN
#define X_CS_PIN PC10
#endif
#define Y_STEP_PIN PF12 // M2
#define Y_DIR_PIN PF11
#define Y_ENABLE_PIN PB3
#ifndef Y_CS_PIN
#define Y_CS_PIN PF13
#endif
#define Z_STEP_PIN PD7 // M3
#define Z_DIR_PIN PD6
#define Z_ENABLE_PIN PF10
#ifndef Z_CS_PIN
#define Z_CS_PIN PF9
#endif
#define Z2_STEP_PIN PD3 // M4
#define Z2_DIR_PIN PD2
#define Z2_ENABLE_PIN PD5
#ifndef Z2_CS_PIN
#define Z2_CS_PIN PD4
#endif
#define E0_STEP_PIN PC9 // M5
#define E0_DIR_PIN PC8
#define E0_ENABLE_PIN PD1
#ifndef E0_CS_PIN
#define E0_CS_PIN PD0
#endif
//
// Software SPI pins for TMC2130 stepper drivers
//
#if ENABLED(TMC_USE_SW_SPI)
#ifndef TMC_SW_MOSI
#define TMC_SW_MOSI PA7
#endif
#ifndef TMC_SW_MISO
#define TMC_SW_MISO PA6
#endif
#ifndef TMC_SW_SCK
#define TMC_SW_SCK PA5
#endif
#endif
#if HAS_TMC_UART
#define X_SERIAL_TX_PIN PC10
#define X_SERIAL_RX_PIN X_SERIAL_TX_PIN
#define Y_SERIAL_TX_PIN PF13
#define Y_SERIAL_RX_PIN Y_SERIAL_TX_PIN
#define Z_SERIAL_TX_PIN PF9
#define Z_SERIAL_RX_PIN Z_SERIAL_TX_PIN
#define Z2_SERIAL_TX_PIN PD4
#define Z2_SERIAL_RX_PIN Z2_SERIAL_TX_PIN
#define E0_SERIAL_TX_PIN PD0
#define E0_SERIAL_RX_PIN E0_SERIAL_TX_PIN
// Reduce baud rate to improve software serial reliability
#define TMC_BAUD_RATE 19200
#endif
//
// Temperature Sensors
//
#define TEMP_BED_PIN PA0 // TB
#define TEMP_0_PIN PA1 // TH0
#define TEMP_1_PIN PA2 // TH1
#define TEMP_2_PIN PA3 // TH2
#define TEMP_3_PIN PA4 // TH3
//
// Heaters / Fans
//
#define HEATER_BED_PIN PB7 // BED-OUT
#define HEATER_0_PIN PE3 // HE0
#define HEATER_1_PIN PB5 // HE1
#define HEATER_2_PIN PB6 // HE2
#define HEATER_3_PIN PE1 // HE3
#define FAN_PIN PE6 // FAN0
#define FAN1_PIN PE0 // FAN1
#define FAN2_PIN PC12 // FAN2
#define FAN3_PIN PE5 // FAN3
#define FAN4_PIN PE4 // FAN4
#define FAN5_PIN PB8 // FAN5
#define FAN6_PIN PB9 // FAN6
//
// SD Support
//
#ifndef SDCARD_CONNECTION
#if HAS_WIRED_LCD
#define SDCARD_CONNECTION LCD
#else
#define SDCARD_CONNECTION ONBOARD
#endif
#endif
/**
* ------ ------
* (BEEPER) PE9 | 1 2 | PE10 (BTN_ENC) (MISO) PB14 | 1 2 | PB13 (SCK)
* (LCD_EN) PE11 | 3 4 | PE12 (LCD_RS) (BTN_EN1) PF7 | 3 4 | PB12 (SD_SS)
* (LCD_D4) PE13 | 5 6 PE14 (LCD_D5) (BTN_EN2) PE7 | 5 6 PB11 (MOSI)
* (LCD_D6) PE15 | 7 8 | PB10 (LCD_D7) (SD_DETECT) PE8 | 7 8 | RESET
* GND | 9 10 | 5V GND | 9 10 | --
* ------ ------
* EXP1 EXP2
*/
#define EXP1_01_PIN PE9
#define EXP1_02_PIN PE10
#define EXP1_03_PIN PE11
#define EXP1_04_PIN PE12
#define EXP1_05_PIN PE13
#define EXP1_06_PIN PE14
#define EXP1_07_PIN PE15
#define EXP1_08_PIN PB10
#define EXP2_01_PIN PB14
#define EXP2_02_PIN PB13
#define EXP2_03_PIN PF7
#define EXP2_04_PIN PB12
#define EXP2_05_PIN PE7
#define EXP2_06_PIN PB11
#define EXP2_07_PIN PE8
#define EXP2_08_PIN -1
//
// Onboard SD card
// Must use soft SPI because Marlin's default hardware SPI is tied to LCD's EXP2
//
#if SD_CONNECTION_IS(LCD)
#define SDSS EXP2_04_PIN
#define SD_SS_PIN SDSS
#define SD_SCK_PIN EXP2_02_PIN
#define SD_MISO_PIN EXP2_01_PIN
#define SD_MOSI_PIN EXP2_06_PIN
#define SD_DETECT_PIN EXP2_07_PIN
#elif SD_CONNECTION_IS(ONBOARD)
#define SD_DETECT_PIN PE8
#define SD_SCK_PIN PB13
#define SD_MISO_PIN PB14
#define SD_MOSI_PIN PB11
#define ONBOARD_SD_CS_PIN PB14 // Chip select for "System" SD card
#define SD_SS_PIN ONBOARD_SD_CS_PIN
#elif SD_CONNECTION_IS(CUSTOM_CABLE)
#error "No custom SD drive cable defined for this board."
#endif
//
// LCDs and Controllers
//
#if IS_TFTGLCD_PANEL
#if ENABLED(TFTGLCD_PANEL_SPI)
#define TFTGLCD_CS EXP2_03_PIN
#endif
#elif HAS_WIRED_LCD
#define BEEPER_PIN EXP1_01_PIN
#define BTN_ENC EXP1_02_PIN
#if ENABLED(CR10_STOCKDISPLAY)
#define LCD_PINS_RS EXP1_07_PIN
#define BTN_EN1 EXP1_03_PIN
#define BTN_EN2 EXP1_05_PIN
#define LCD_PINS_ENABLE EXP1_08_PIN
#define LCD_PINS_D4 EXP1_06_PIN
#elif ENABLED(MKS_MINI_12864)
#define DOGLCD_A0 EXP1_07_PIN
#define DOGLCD_CS EXP1_06_PIN
#define BTN_EN1 EXP2_03_PIN
#define BTN_EN2 EXP2_05_PIN
#else
#define LCD_PINS_RS EXP1_04_PIN
#define BTN_EN1 EXP2_03_PIN
#define BTN_EN2 EXP2_05_PIN
#define LCD_PINS_ENABLE EXP1_03_PIN
#define LCD_PINS_D4 EXP1_05_PIN
#if ENABLED(FYSETC_MINI_12864)
#define DOGLCD_CS EXP1_03_PIN
#define DOGLCD_A0 EXP1_04_PIN
//#define LCD_BACKLIGHT_PIN -1
#define FORCE_SOFT_SPI // Use this if default of hardware SPI causes display problems
// results in LCD soft SPI mode 3, SD soft SPI mode 0
#define LCD_RESET_PIN EXP1_05_PIN // Must be high or open for LCD to operate normally.
#if EITHER(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0)
#ifndef RGB_LED_R_PIN
#define RGB_LED_R_PIN EXP1_06_PIN
#endif
#ifndef RGB_LED_G_PIN
#define RGB_LED_G_PIN EXP1_07_PIN
#endif
#ifndef RGB_LED_B_PIN
#define RGB_LED_B_PIN EXP1_08_PIN
#endif
#elif ENABLED(FYSETC_MINI_12864_2_1)
#define NEOPIXEL_PIN EXP1_06_PIN
#endif
#endif // !FYSETC_MINI_12864
#if IS_ULTIPANEL
#define LCD_PINS_D5 EXP1_06_PIN
#define LCD_PINS_D6 EXP1_07_PIN
#define LCD_PINS_D7 EXP1_08_PIN
#if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
#define BTN_ENC_EN LCD_PINS_D7 // Detect the presence of the encoder
#endif
#endif
#endif
#endif // HAS_WIRED_LCD
// Alter timing for graphical display
#if IS_U8GLIB_ST7920
#ifndef BOARD_ST7920_DELAY_1
#define BOARD_ST7920_DELAY_1 120
#endif
#ifndef BOARD_ST7920_DELAY_2
#define BOARD_ST7920_DELAY_2 80
#endif
#ifndef BOARD_ST7920_DELAY_3
#define BOARD_ST7920_DELAY_3 580
#endif
#endif

2
Marlin/src/pins/stm32g0/pins_BTT_SKR_MINI_E3_V3_0.h
View File

@@ -21,6 +21,8 @@
*/
#pragma once
#include "env_validate.h"
//#define BOARD_CUSTOM_BUILD_FLAGS -DTONE_CHANNEL=4 -DTONE_TIMER=4 -DTIMER_TONE=4
#ifndef BOARD_INFO_NAME