9ea71bc4d2
* Basic Init * Rought implementation of fs2711 usb pd interface * Rought implementation of fs2711 usb pd interface * Still needs work overcurrent protection keeps getting tripped * New pdo selection logic * Update push.yml * Update push.yml * Update push.yml * Update Makefile * Adds PPS * Removed unused define * Adds PPS * Apply suggestions from code review Co-authored-by: Ben V. Brown <5425387+Ralim@users.noreply.github.com> * Code review changes * Added osDelay include * New line alignment for S60 softwarei2c * Code review * Fixes code review stuff * code review changes * Change voltage limit to 20 as that's what the device is rated for * Shortened wait time for usb pd * Fixed issues that cuase S60P to restart constantly * fixing minimal OLED brightness With the current settings, the OLED turns off if the first level is selected. * Adds protocol to s60p debug menu * loosened fs2711 protocol selection timing * Adds PDO register reading to negotiation logic * Fixes FS2711 timeout issue and cleans up driver * Adds FS2711 protocol negotiation to power loop * Removed uneeded define * Reverts changes to Font.h and adds clang-format comments --------- Co-authored-by: Ben V. Brown <Ralim@Ralimtek.com> Co-authored-by: discip <53649486+discip@users.noreply.github.com> Co-authored-by: Ben V. Brown <5425387+Ralim@users.noreply.github.com>
BSP section for STM32F103 based Miniware products
This folder contains the hardware abstractions required for the TS100, TS80 and probably TS80P soldering irons.
Main abstractions
- Hardware Init
- -> Should contain all bootstrap to bring the hardware up to an operating point
- -> Two functions are required, a pre and post FreeRToS call
- I2C read/write
- Set PWM for the tip
- Links between IRQ's on the system and the calls in the rest of the firmware