sv/IronOS
1
0
Fork 0
forked from me/IronOS
Code Pull Requests Activity
Files
e612c4751f720e6ff409eb827100c468b3fadf91
IronOS/workspace/TS100/Core/BSP/Pine64
History
Ben V. Brown a1a7eb9e59 Hall Effect sensor working in higher range
2020-10-31 15:45:36 +11:00
..
N200
Cleanup stubs so that LTO can be used on Pinecil
2020-10-31 00:03:44 +11:00
Vendor
Cleanup stubs so that LTO can be used on Pinecil
2020-10-31 00:03:44 +11:00
BSP_PD.c
Fix PD IRQ
2020-09-20 16:15:55 +10:00
BSP.cpp
Add support for dual speed PWM
2020-10-13 20:23:43 +11:00
flash.c
Save and restore settings
2020-09-24 19:20:51 +10:00
FreeRTOSConfig.h
Fix build
2020-09-26 17:09:57 +10:00
fusb302b.cpp
Move to basic DMA I2C | handle poll FUSB better
2020-09-25 18:50:41 +10:00
I2C_Wrapper.cpp
Hall Effect sensor working in higher range
2020-10-31 15:45:36 +11:00
IRQ.cpp
Add support for dual speed PWM
2020-10-13 20:23:43 +11:00
IRQ.h
Move to basic DMA I2C | handle poll FUSB better
2020-09-25 18:50:41 +10:00
logo.cpp
Add support for dual speed PWM
2020-10-13 20:23:43 +11:00
Model_Config.h
Cleanup stubs so that LTO can be used on Pinecil
2020-10-31 00:03:44 +11:00
NOTES.md
Update configs for newer pinout
2020-09-17 18:37:57 +10:00
Pins.h
Add GPIO for QC
2020-09-28 21:11:40 +10:00
postRTOS.cpp
Cleanup stubs so that LTO can be used on Pinecil
2020-10-31 00:03:44 +11:00
Power.cpp
Update configs for newer pinout
2020-09-17 18:37:57 +10:00
preRTOS.cpp
Move OLED to use bulk setup
2020-09-20 16:09:59 +10:00
QC_GPIO.cpp
Add GPIO for QC
2020-09-28 21:11:40 +10:00
README.md
Port Pine64 base BSP package
2020-08-15 23:00:42 +10:00
Setup.c
Wake Halleffect correctly helps.....
2020-10-31 00:15:30 +11:00
Setup.h
Add support for dual speed PWM
2020-10-13 20:23:43 +11:00
UnitSettings.h
Port Pine64 base BSP package
2020-08-15 23:00:42 +10:00

README.md

BSP section for STM32F103 based Miniware products

This folder contains the hardware abstractions required for the TS100, TS80 and probably TS80P soldering irons.

Main abstractions

  • Hardware Init
  • -> Should contain all bootstrap to bring the hardware up to an operating point
  • -> Two functions are required, a pre and post FreeRToS call
  • I2C read/write
  • Set PWM for the tip
  • Links between IRQ's on the system and the calls in the rest of the firmware
View Git Blame Copy Permalink