c308fe8cc2
* Start PWM after adc irq fully done * Filter len 4 * Use comparitor 2 on timer for wrap around * Update IRQ.cpp * Tip measurements are uint16_t Update BSP.cpp Update BSP.cpp * WiP PID move pid tuning to config Update PIDThread.cpp * Handle PWM Timer gitchy comparitor * Tuning * Dampen with Kd * Cleaning up * Use TemperatureType_t for getTipTemp() * Add small rolling average to user GUI temp to reduce flicker * Trigger PID when adc is skipped (will use old values)
65 lines
2.0 KiB
C++
65 lines
2.0 KiB
C++
#include "OperatingModes.h"
|
|
|
|
extern OperatingMode currentMode;
|
|
|
|
int gui_SolderingSleepingMode(bool stayOff, bool autoStarted) {
|
|
#ifndef NO_SLEEP_MODE
|
|
// Drop to sleep temperature and display until movement or button press
|
|
currentMode = OperatingMode::sleeping;
|
|
|
|
for (;;) {
|
|
// user moved or pressed a button, go back to soldering
|
|
// If in the first two seconds we disable this to let accelerometer warm up
|
|
|
|
#ifdef POW_DC
|
|
if (checkForUnderVoltage()) {
|
|
// return non-zero on error
|
|
return 1;
|
|
}
|
|
#endif
|
|
|
|
if (getSettingValue(SettingsOptions::TemperatureInF)) {
|
|
currentTempTargetDegC = stayOff ? 0 : TipThermoModel::convertFtoC(min(getSettingValue(SettingsOptions::SleepTemp), getSettingValue(SettingsOptions::SolderingTemp)));
|
|
} else {
|
|
currentTempTargetDegC = stayOff ? 0 : min(getSettingValue(SettingsOptions::SleepTemp), getSettingValue(SettingsOptions::SolderingTemp));
|
|
}
|
|
|
|
// draw the lcd
|
|
TemperatureType_t tipTemp = getTipTemp();
|
|
|
|
OLED::clearScreen();
|
|
OLED::setCursor(0, 0);
|
|
if (getSettingValue(SettingsOptions::DetailedSoldering)) {
|
|
OLED::print(translatedString(Tr->SleepingAdvancedString), FontStyle::SMALL);
|
|
OLED::setCursor(0, 8);
|
|
OLED::print(translatedString(Tr->SleepingTipAdvancedString), FontStyle::SMALL);
|
|
OLED::printNumber(tipTemp, 3, FontStyle::SMALL);
|
|
OLED::printSymbolDeg(FontStyle::SMALL);
|
|
OLED::print(SmallSymbolSpace, FontStyle::SMALL);
|
|
printVoltage();
|
|
OLED::print(SmallSymbolVolts, FontStyle::SMALL);
|
|
} else {
|
|
OLED::print(translatedString(Tr->SleepingSimpleString), FontStyle::LARGE);
|
|
OLED::printNumber(tipTemp, 3, FontStyle::LARGE);
|
|
OLED::printSymbolDeg(FontStyle::EXTRAS);
|
|
}
|
|
|
|
OLED::refresh();
|
|
GUIDelay();
|
|
|
|
if (!shouldBeSleeping(autoStarted)) {
|
|
return 0;
|
|
}
|
|
|
|
if (shouldShutdown()) {
|
|
// shutdown
|
|
currentTempTargetDegC = 0;
|
|
// we want to exit soldering mode
|
|
return 1;
|
|
}
|
|
}
|
|
#endif
|
|
|
|
return 0;
|
|
}
|