c308fe8cc2
* Start PWM after adc irq fully done * Filter len 4 * Use comparitor 2 on timer for wrap around * Update IRQ.cpp * Tip measurements are uint16_t Update BSP.cpp Update BSP.cpp * WiP PID move pid tuning to config Update PIDThread.cpp * Handle PWM Timer gitchy comparitor * Tuning * Dampen with Kd * Cleaning up * Use TemperatureType_t for getTipTemp() * Add small rolling average to user GUI temp to reduce flicker * Trigger PID when adc is skipped (will use old values)
53 lines
1.9 KiB
C
53 lines
1.9 KiB
C
#ifndef OPERATING_MODES_H_
|
|
#define OPERATING_MODES_H_
|
|
|
|
extern "C" {
|
|
#include "FreeRTOSConfig.h"
|
|
}
|
|
#include "Buttons.hpp"
|
|
#include "OLED.hpp"
|
|
#include "OperatingModeUtilities.h"
|
|
#include "Settings.h"
|
|
#include "TipThermoModel.h"
|
|
#include "Translation.h"
|
|
#include "Types.h"
|
|
#include "cmsis_os.h"
|
|
#include "configuration.h"
|
|
#include "history.hpp"
|
|
#include "main.hpp"
|
|
#include "power.hpp"
|
|
#include "settingsGUI.hpp"
|
|
#include "stdlib.h"
|
|
#include "string.h"
|
|
#ifdef POW_PD
|
|
#include "USBPD.h"
|
|
#include "pd.h"
|
|
#endif
|
|
|
|
// Exposed modes
|
|
enum OperatingMode {
|
|
idle = 0,
|
|
soldering = 1,
|
|
boost = 2,
|
|
sleeping = 3,
|
|
settings = 4,
|
|
debug = 5
|
|
};
|
|
|
|
// Main functions
|
|
void performCJCC(void); // Used to calibrate the Cold Junction offset
|
|
void gui_solderingTempAdjust(void); // For adjusting the setpoint temperature of the iron
|
|
int gui_SolderingSleepingMode(bool stayOff, bool autoStarted); // Sleep mode
|
|
void gui_solderingMode(uint8_t jumpToSleep); // Main mode for hot pointy tool
|
|
void gui_solderingProfileMode(); // Profile mode for hot likely-not-so-pointy tool
|
|
void showDebugMenu(void); // Debugging values
|
|
void showPDDebug(void); // Debugging menu that shows PD adaptor info
|
|
void showWarnings(void); // Shows user warnings if required
|
|
void drawHomeScreen(bool buttonLockout) __attribute__((noreturn)); // IDLE / Home screen
|
|
void renderHomeScreenAssets(void); // Called to act as start delay and used to render out flipped images for home screen graphics
|
|
|
|
// Common helpers
|
|
int8_t getPowerSourceNumber(void); // Returns number ID of power source
|
|
TemperatureType_t getTipTemp(void); // Returns temperature of the tip in *C/*F (based on user settings)
|
|
#endif
|