286afad919
* Mock S60 * cleanup * Start refactor of OLED init * Setup timers roughly * Set Vector table offset correctly Update system_stm32f1xx.c * Update OLED.cpp * Update stm32f1xx_hal_msp.c * Update configuration.h * I2C init before GPIO From Errata Update stm32f1xx_hal_msp.c Update Software_I2C.h Allow no hardware I2C * I2C BB run bus unlock at init * cleanups * Software I2C for now * Mildly more graceful Interpolate * Handle is powered by DC Update Power.cpp Update drawPowerSourceIcon.cpp Update configuration.h Update Setup.cpp * Cleanup HomeScreen * Segment remap oled at init * Cleanup * Update MOVThread.cpp * Fix PWM Init * Fix adc2 trigger * Update configs * Fixup warning * Saner default config * Update ThermoModel.cpp * Util for current@voltage * Hub238 warning * Add hub238 handling in power mode * Update USBPDDebug_FUSB.cpp * HUSB238 debug * Hook PSU Limit * Use wrapping section of GRAM for scroll Update OLED.hpp * Update NTC table * Fix HUB voltage picker * Cleanup * Larger tip filter * Calibrate in a bunch closer Update ThermoModel.cpp * Update configuration.h * Update HUB238.cpp * Update configuration.h * Movement Pin * Update BSP.cpp * tim2 irq * Rough timer conversion (adc broken) but movement working * Fix tim2 start * Faster base PWM * Ensure utils grabs config * Add wattage limiter tolerance for device * Speed up PWM and enable PWM current limiting * tune for 12v * Prevent start until PD done * Update configuration.h * Add HUB238 check for have re-negotiated * Adjust timer to avoid noise when its possible
91 lines
2.5 KiB
C++
91 lines
2.5 KiB
C++
/*
|
|
* GUIThread.cpp
|
|
*
|
|
* Created on: 19 Aug 2019
|
|
* Author: ralim
|
|
*/
|
|
extern "C" {
|
|
#include "FreeRTOSConfig.h"
|
|
}
|
|
#include "BootLogo.h"
|
|
#include "Buttons.hpp"
|
|
#include "I2CBB.hpp"
|
|
#include "LIS2DH12.hpp"
|
|
#include "MMA8652FC.hpp"
|
|
#include "OLED.hpp"
|
|
#include "OperatingModeUtilities.h"
|
|
#include "OperatingModes.h"
|
|
#include "Settings.h"
|
|
#include "TipThermoModel.h"
|
|
#include "Translation.h"
|
|
#include "cmsis_os.h"
|
|
#include "configuration.h"
|
|
#include "history.hpp"
|
|
#include "main.hpp"
|
|
#include "power.hpp"
|
|
#include "settingsGUI.hpp"
|
|
#include "stdlib.h"
|
|
#include "string.h"
|
|
#ifdef POW_PD
|
|
#include "USBPD.h"
|
|
#include "pd.h"
|
|
#endif
|
|
// File local variables
|
|
|
|
extern bool heaterThermalRunaway;
|
|
|
|
/* StartGUITask function */
|
|
void startGUITask(void const *argument) {
|
|
(void)argument;
|
|
prepareTranslations();
|
|
|
|
OLED::initialize(); // start up the LCD
|
|
OLED::setBrightness(getSettingValue(SettingsOptions::OLEDBrightness));
|
|
OLED::setInverseDisplay(getSettingValue(SettingsOptions::OLEDInversion));
|
|
|
|
bool buttonLockout = false;
|
|
renderHomeScreenAssets();
|
|
getTipRawTemp(1); // reset filter
|
|
|
|
OLED::setRotation(getSettingValue(SettingsOptions::OrientationMode) & 1);
|
|
// If the front button is held down, on supported devices, show PD debugging metrics
|
|
#ifdef HAS_POWER_DEBUG_MENU
|
|
#ifdef POW_PD
|
|
if (getButtonA()) {
|
|
#endif
|
|
#if POW_PD_EXT == 1
|
|
if (getButtonB()) {
|
|
#endif
|
|
showPDDebug();
|
|
}
|
|
#endif
|
|
|
|
if (getSettingValue(SettingsOptions::CalibrateCJC) > 0) {
|
|
performCJCC();
|
|
}
|
|
|
|
// If the boot logo is enabled (but it times out) and the autostart mode is enabled (but not set to sleep w/o heat), start heating during boot logo
|
|
if (getSettingValue(SettingsOptions::LOGOTime) > 0 && getSettingValue(SettingsOptions::LOGOTime) < 5 && getSettingValue(SettingsOptions::AutoStartMode) > 0
|
|
&& getSettingValue(SettingsOptions::AutoStartMode) < 3) {
|
|
uint16_t sleepTempDegC;
|
|
if (getSettingValue(SettingsOptions::TemperatureInF)) {
|
|
sleepTempDegC = TipThermoModel::convertFtoC(getSettingValue(SettingsOptions::SleepTemp));
|
|
} else {
|
|
sleepTempDegC = getSettingValue(SettingsOptions::SleepTemp);
|
|
}
|
|
// Only heat to sleep temperature (but no higher than 75°C for safety)
|
|
currentTempTargetDegC = min(sleepTempDegC, 75);
|
|
}
|
|
|
|
BootLogo::handleShowingLogo((uint8_t *)FLASH_LOGOADDR);
|
|
|
|
showWarnings();
|
|
if (getSettingValue(SettingsOptions::AutoStartMode)) {
|
|
// jump directly to the autostart mode
|
|
gui_solderingMode(getSettingValue(SettingsOptions::AutoStartMode) - 1);
|
|
buttonLockout = true;
|
|
}
|
|
|
|
drawHomeScreen(buttonLockout);
|
|
}
|